HCN SLA 00 0AA AB 002_A_Applicable Standards

Dates :

Approval Return Status

Name :

Reference :

Comments

SigN. SigN. SigN. SigN. SigN. SigN. A

SigN.

REV

NEVO C

LI PENGHAI

GAO XUEJUN

02/02/08

ESTABLISHED

CHECKED

APPROVED

DATE

FIRST ISSUE

GFA MODIFICATIONS

STAT.

VIETNAM ELECTRICITY SON LA HYDROPOWER PROJECT 6×400MW Turbine Generator, 90.9rpm, 78m

PACKAGE 4B-CTC: SUPPLY OF PLANT ELECTRO-MECHANICAL EQUIPMENT CONTRACT NO: 4B-CTC/ASLA-APH/2007 PURCHASER:

SLaMB

ENGINEER:

SUPPLIER:

PECC1 HYDRO CONSORTIUM

APPLICABLE STANDARDS LIST

SCALE

SIZE

SUBSUPPLIER:

HCN SLA 00 0AA AB 002

REV. SH/SH END

A

1/14

N of S

14

HYDRO CONSORTIUM

PA 401 A

MODIFICATIONS TABLE REV

ESTABLISHED

CHECKED

A

NEVO C

LI PENGHAI

.2/A

APPROVED

DATE

GAO XUEJUN 02/02/08 FIRST ISSUE

MODIFICATIONS

Status. GFA

HYDRO CONSORTIUM

SUMMARY

1 2

3 4 5

6 7 8

9

10 11 12 13 14

.3/A

PURPOSE...........................................................................................................................................4 TURBINE AND GOVERNORS ............................................................................................................4 2.1 TURBINE ...................................................................................................................................4 2.2 GOVERNING SYSTEM ..............................................................................................................5 MECHANICAL AUXILIARIES ..............................................................................................................6 AIR CONDITIONNING AND VENTILATION SYSTEM.........................................................................6 GENERATOR AND EXCITATION .......................................................................................................6 5.1 GENERATOR.............................................................................................................................6 5.2 EXCITATION..............................................................................................................................8 CONTROL SYSTEM ...........................................................................................................................9 COMMUNICATION .............................................................................................................................9 GENERATOR VOLTAGE EQUIPMENT ..............................................................................................9 8.1 IPB .............................................................................................................................................9 8.2 GENERATOR SWITCHGEAR ASSEMBLY..............................................................................10 8.3 DYNAMIC BRAKING CUBICLE................................................................................................10 AUXILIARY POWER SYSTEM..........................................................................................................11 9.1 transformer ...............................................................................................................................11 9.2 mv switchboards.......................................................................................................................11 9.3 lv switchboards.........................................................................................................................11 9.4 Dc system ................................................................................................................................12 9.5 UNINTERRUPTIBLE POWER SUPPLY (UPS) ........................................................................12 DIESEL GENERATOR ......................................................................................................................12 LIGHTING SYSTEM AND SMALL POWER SYSTEM .......................................................................12 FIRE ALARM AND FIGHTING SYSTEM ...........................................................................................13 EQUIPMENT EARTHING SYSTEM ..................................................................................................13 CABLES ............................................................................................................................................13

HYDRO CONSORTIUM

1

PURPOSE The purpose of that document is to list the different standards used on Son La project by Alstom for the completion of 4B-CTC package.

2

TURBINE AND GOVERNORS

2.1

TURBINE

.4/A

GB/T8564-2003

Specification installation of hydraulic turbine generator units

ISO 60193

Hydraulic turbines, acceptable tests

IEC193-1999

Specifications for water passage components of hydraulic turbine

ISO1101

Geometrical tolerancing

ISO2768-2:1989

Geometrical tolerancing-without indications

GB/T1804-2000

General tolerances for linear and angular dimensions without indications

GB/T232-1999

Metallic materials – Bend test

GB/T228-2002

Metallic materials – Tensile testing at ambient temperature

GB/T229-94

Metallic materials – Charpy notch impact test

GB150-1998

Steel pressure vessel

GB6967-86

Steel pressure vessel

GB/T699-1999

Quality carbon structural steel

GB/T700-1988

Carbon structural steel

GB/T1591-1994

Low alloy structural steel

GB/T3077-1999

Alloy structural steel

GB/T3274-1988

Carbon structural and low alloy steel rolled plates and strips

GB/T5313-1985

Steel plate with through-thickness characteristic

GB/T2970-1991

Thicker steel plate – Method for ultrasonic inspection

GB/T6402-1988

Forging steel – Method for ultrasonic inspection

GB/T1174-1992

Casting babbit metals

storage

pumps

and

pump-turbines

–

model

HYDRO CONSORTIUM ISO1940-1 :1996

Mechanical vibration–Balance quality requirements of rigid rotors – Part 1 : Determination of permissible residual unbalance

JB1270－2002

Specification for shaft forgings for hydraoturbine and hydrogenerator

TI-QA-005

General tolerance of welding

TI-QA-006

Packing,transprotion & protection technical requirement for hydro turbine generator

TI-QA-021

General technical specification for carbon and alloy steel forgings

TA012-001

Contrast of Chinese and International common cast steels used for hydro turbine (GB, NF and ASTM)

TA015-000

Inspection and classification of weld

TI-QACD-1.20-A001

General technical specification of carbon steel castings of hydraulic machinery

TI-QACD-1.20-A003

General technical specification of stainless steel castings of hydraulic machinery

TI-QACD-1.25-A000

General technical specification of surfaces painting of hydraulic machinery

TI-QA-O29A

Ultrasonic inspection for casting steel within welding area

TI-QACD-1.27-A001/TI-QC-004A CCH70

3

JB/T4730.1-2005

Ultrasonic inspection for casting steel within welding area

General inpection specification of casting steel of hydro machinery Pressure vessel NDT

TI-031-000,001002,004006 Mechanical properties of fasteners-Bolts, screws and studs/ Mechanical properties of fasteners Nuts-Coarse thread GB/T15822-1995

Methods for magnetic partite testing

JB/T4385.1-1999

General specification for open die forgings on hammer

TI-QACD-1.20-A002Ind.A NBA B30001A

General Specification for Babbitt block Base and Bearing Sleeve

General tolerances for Flame-cut parts Material standard for B610CF and WDB620

2.2

.5/A

GOVERNING SYSTEM

IEC 61361

Guide to specification of hydroturbine control system

IEC 60 308

Hydraulic turbines - Testing of control systems

HYDRO CONSORTIUM

3

4

GB150-1998

Steel pressure vessels

GB/T11805-1999

Basic specifications of automatic control components and their related system for hydroturbine-generating sets

devices

MECHANICAL AUXILIARIES GB150-1998

Steel Pressure Vessels

GB/T 3096-2001

Welded Steel Pipe For Low Pressure Liquid Delivery

GB/T 8163-1999

Stainless Steel Tables For Liquid Service

GB/T 14976-2002

Stainless Steel Seamless Tables For Liquid Service

GB/T 14976-2002

Code For Design Of Heating Ventilation And Air Conditioning

AIR CONDITIONNING AND VENTILATION SYSTEM IEC 60364-1

Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

IEC 60497 (Replaced by IEC 60193) Hydraulic turbines, storage pumps and pump-turbines Model acceptance tests IEC 60621-1

Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries). Part 1: Scope and definitions

IEC 60621-4

Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries). Part 4: Requirements for the installation

IEC 60227-1

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

IEC 60502

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS

5

GENERATOR AND EXCITATION

5.1

GENERATOR

.6/A

GB/T8564-2003

Specification installation of hydraulic turbine generator units

GB/T1804-2000

General tolerances for linear and angular dimensions without indications

HYDRO CONSORTIUM

.7/A

GB/T1591-1994

Low alloy structural steel

GB/T2970-2004

Thicker steel plate – Method for ultrasonic inspection

GB/T6402-1991

Forging steel – Method for ultrasonic inspection

GB/T232-1999

Metallic materials – Bend test

JB1270－2002

Specification for shaft forgings for hydraoturbine and hydrogenerator

TI-QA-005

General tolerance of welding

TI-QA-021

General technical specification for carbon and alloy steel forgings

TA015-000A

Inspection and classification of weld

TI-QACD-1.20-A001

General technical specification of carbon steel castings of hydraulic machinery

TI-QACD-1.25-A000

General technical specification of surfaces painting of hydraulic machinery

CCH70

General inpection specification of casting steel of hydro machinery

3

JB/T4730.1-2005

Pressure vessel NDT

GB3098.1-2000

Mechanical properties of fasteners-Bolts, screws and studs

GB3098.4-2000

Mechanical properties of fasteners-Nuts thin thread

GB/T15822-1995

Methods for magnetic partite testing

GB5313-85

Steel plate with through-thickness characteristic

JB/T4385.1-1999

General specification for open die forgings on hammer

DL/T622-1997

Technical specifications of elastic metal plastic segment for thrust bearings of vertical-shaft hydro generators

TA012-007A

Clamping Finger

TI-QA-024

Magnetic steel plate for rim lamination

TI-QA-025

Magnetic steel plate for pole lamination

TI-IE-001C

Painting specification for ventilation lamination

TI-IE-003

The regulation about applying with rustproof lipin for production

TI-QACD-1.20-A002

General Specification for Babbitt block Base and Bearing Sleeve

0GT 624 001

General tolerances for Flame-cut parts

9AHE427202

Cast insulating hoods for generator stator wingding

0GT 688 001

Ring flux test checking of hydraulic generator cores

TI-GE-003

Stator core components-stator key bar

HYDRO CONSORTIUM

5.2

0GT 628 000

Character and check condition of electrical copper

TI-QA-016

Cold-rolled non-oriented magnetic steel strip

TI-QA-017B

Ventilation spacer

TI-PRMD-5.09-035B

Insulating specification of F class pole

TI-GE-001

Cold drawn brass for pole coil-Dimension and Tolerance

TI-QASD-3.01-A001

Technical specification of generator runner plate

EXCITATION

IEC 60034-16

IEC 60076-11

Rotating electrical machined – Part16: Excitation system for synchronous machines Power transformers - Part 11: Dry-type transformers

IEC 60044-2

Instrument transformers - Part 2 : Inductive voltage transformers

IEC 60146-1-1

Semiconductor convertors - General requirements and line commutated convertors - Part 1-1: Specifications of basic requirements

IEC 60146-1-2

Semiconductor convertors - General requirements and line commutated convertors - Part 1-2: Application guide

IEC 60146-1-3

Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors

IEC 60146-2

Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters

IEC 60146-6

Semiconductor convertors - Part 6: Application guide for the protection of semiconductor convertors against overcurrent by fuses

IEEE421.1

Definitions for excitation systems for synchronous machines

IEC 60255-14 (Replaced by IEC 61810-2) Reliability

.8/A

Electromechanical elementary relays - Part 2:

IEC 60529

Degree of protection provided by enclosures (IP code)

IEC 60255-5

Electrical Relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests

EN 50081-2

Electromagnetic compatibility – Generic emission standard

EN 50082-2

Electromagnetic compatibility – Generic immunity standard

IEC 61000

Electromagnetic compatibility (EMC)

HYDRO CONSORTIUM

6

CONTROL SYSTEM IEC 60227

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

IEC STANDARD

7

COMMUNICATION TELEPHONE SUBSCRIBER SYSTEM ITU-T

International Telecommunications Standardization Sector

Union

-

Telecommunication

ITU-R

International Telecommunications Union - Ratio communication Sector

WIRE BROADCASTING AND PAGING SYSTEM IEC 60793-1-1

Optical fibres - Part 1-1: Measurement methods and test procedures General and guidance

IEC 60794-1-1

Optical fibre cables - Part 1-1: Generic specification – General

D.C. POWER SUPPLY SYSTEM IEC 60896-11

Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests

8

GENERATOR VOLTAGE EQUIPMENT

8.1

IPB IPB IEEE C37.23-1987

Metal-Enclosed Bus&Calculating Losses in Isolated-Phase Bus

GENERATOR NEUTRAL TRANSFORMER AND CUBICLE

.9/A

HYDRO CONSORTIUM IEC 60289 (Replaced

by IEC 60076-6)

Power transformers - Part 6: Reactors

IEC STANDARD

8.2

GENERATOR SWITCHGEAR ASSEMBLY GENERATOR CIRCUIT BREAKER IEEE C 37 013

AC High voltage generator circuit breakers rated on a symmetrical current basis

CURRENT TRANSFORMER IEC 60044-1-2003

Instrument transformers Part 1 Current transformers

VOLTAGE TRANSFORMER IEC 60044-2-2003

Instrument transformers part 2 Inductive voltage transformers

LIGHTNING ARRESTER IEC 60099-4

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

SURGE CAPACITOR IEC 60358

Coupling capacitors and capacitor dividers

EARTHING SWITCH IEC 60129 (Replaced by IEC 62271-102) IEC 62271-102

8.3

DYNAMIC BRAKING CUBICLE IEEE C 37 013

.10/A

High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches

AC High voltage generator circuit breakers rated on a symmetrical current basis

HYDRO CONSORTIUM

9

AUXILIARY POWER SYSTEM

9.1

TRANSFORMER TRANSFORMER (OIL IMMERSED TYPE) IEC 60076-1

Power transformers - Part 1: General

IEC 60076-2

Power transformers - Part 2: Temperature rise

IEC 60076-3

Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

IEC 60076-4

Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors

TRANSFORMER (DRY TYPE) IEC 60726 (Replaced by IEC 60076-11)

9.2

Power transformers - Part 11: Dry-type transformers

MV SWITCHBOARDS 6.3KV SWITCHGEAR IEC 60056 (Replaced by IEC 62271-100) High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers IEC 60694 (Replaced by IEC 62271-1) High-voltage switchgear and controlgear - Part 1: Common specifications High-voltage switchgear and controlgear - Part IEC 60298 (Replaced by IEC 62271-200) 200: A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV EARTHING SWITCH OF 6.3KV SWITCHGEAR IEC 60129 (Replaced by IEC 62271-102) High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches IEC 61958

9.3

LV SWITCHBOARDS IEC 60439-1

.11/A

High-voltage prefabricated switchgear and controlgear assemblies Voltage presence indicating systems

Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies

HYDRO CONSORTIUM

9.4

DC SYSTEM CHARGER IEC 60478-4

Stabilized power supplies, d.c. output. Part 4: Tests other than radiofrequency interference

BATTERIES IEC 60896-11

Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests

DISTRIBUTION SWITCHBOARD

9.5

10

IEC 60529

Degrees of protection provided by enclosures (IP Code)

IEC 60947-1

Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-2

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

IEC 60947-3

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

IEC 60898-2

Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation

UNINTERRUPTIBLE POWER SUPPLY (UPS) IEC 62040-1-2

Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS used in restricted access locations

IEC 62040-3

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

DIESEL GENERATOR IEC 60034-1

11

LIGHTING SYSTEM AND SMALL POWER SYSTEM IEC 60598-1

.12/A

Rotating electrical machines - Part 1: Rating and performance

Luminaires - Part 1: General requirements and tests

HYDRO CONSORTIUM

12

13

14

IEC 60364-1

Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

IEC 60364-4-41

Low-voltage electrical installations - Part 4-41: Protection for safety Protection against electric shock

IEC 60364-4-42

Electrical installations of buildings - Part 4-42: Protection for safety Protection against thermal effects

IEC 60364-4-43

Electrical installations of buildings - Part 4-43: Protection for safety Protection against overcurrent

FIRE ALARM AND FIGHTING SYSTEM NFPA 15

Standard for Water Spray Fixed Systems for Fire Protection

NFPA 850

Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations

NFPA 851

Recommended Practice for Fire Protection for Hydroelectric generating plants

EQUIPMENT EARTHING SYSTEM IEEE 80-2000

Guide for safety in AC substation grounding

IEEE 665

Standard for Generating Station Grounding

IEC 60364-5-54

Electrical installations of buildings - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements, protective conductors and protective bonding conductors

IEC 62305-4

Protection against lightning - Part 4: Electrical and electronic systems within structures

CABLES 6.3KV POWER CABLE IEC 60502

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS

IEC 60228

Conductors of insulated cables

0.4KV POWER CABLES

.13/A

HYDRO CONSORTIUM IEC 60502

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS

IEC 60754

Test on gases evolved during combustion of materials from cables

IEC 60332

Tests on electric cables under fire conditions

CONTROL, PROTECTION, MEASURING AND SIGNALING CABLES (Multicore Cables) IEC 60227-1

.14/A

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements