GS EP PVV 000.pdf

Exploration & Production

GENERAL SPECIFICATION PIPING VALVES VESSELS GS EP PVV 000

General Specification catalogue

04

10/06

Revision

03

10/05

Addition of “EP” root to GS identification

02

10/03

Revision – Change of Group name and logo

01

10/02

Revision

00

01/05

First issue

Rev.

Date

Notes

This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.

Exploration & Production General Specification

Date: 10/2006

GS EP PVV 000

Rev: 04

Contents

1. Numbering principle ............................................................................................... 3 2. General specification list........................................................................................ 3 2.1

Generalities........................................................................................................................3

2.2

Piping and Valves ..............................................................................................................4

2.3

Subsea Piping and Valves.................................................................................................5

2.4

Pressure Vessels...............................................................................................................5

2.5

Storage Tanks ...................................................................................................................5

2.6

Heat Exchangers and Air Coolers .....................................................................................6

2.7

Heaters, Boilers and Flares ...............................................................................................6

2.8

Welding..............................................................................................................................6

2.9

Thermal Insulation and Heat Tracing.................................................................................7

2.10

Skid Mounted Units............................................................................................................7

2.11

Inspection ..........................................................................................................................7

Appendix 1

Correspondence between Total and (former) Elf General Specifications ......................................................................................... 8

Appendix 2

Correspondence between Total and (former) TotalFina General Specifications ......................................................................................... 9

This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.

Page 2/9

Exploration & Production General Specification

Date: 10/2006

GS EP PVV 000

Rev: 04

1. Numbering principle Piping Valves Vessels (PVV) discipline "General Specifications" are identified as follows: GS EP PVV XXX:

(XXX = 3 digits)

These GS EP are split in 9 main technical topics (plus one related to generalities). Each topic is identified by the first of the three digits, as follows: GS EP PVV 0XX:

Generalities

GS EP PVV 1XX:

Piping and valves

GS EP PVV 2XX:

Pressure vessels

GS EP PVV 3XX:

Storage tanks

GS EP PVV 4XX:

Heat exchangers and air coolers

GS EP PVV 5XX:

Heaters, Boilers and Flares

GS EP PVV 6XX:

Welding

GS EP PVV 7XX:

Thermal Insulation and heat tracing

GS EP PVV 8XX:

Skid mounted units

GS EP PVV 9XX:

Inspection

As far as possible the following main activities have been treated in separate documents: • Design • Fabrication (in the shop) • Erection (on site). The two last digits are thus attributed accordingly. series

X0X

Generalities

X1X to X3X

Design

X4X to X6X

Shop fabrication and material supply

X7X to X9X

Site erection

Finally the last digit has no specific meaning although code "XX0" would be in principle dedicated to generalities related to one specific topic and one specific activity.

2. General specification list 2.1 Generalities (series: GS EP PVV 0XX) GS EP PVV 000

General Specification catalogue

GS EP PVV 001

Correspondence between Elf and Total piping material classes

This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.

Page 3/9

Exploration & Production General Specification

Date: 10/2006

GS EP PVV 000

Rev: 04

2.2 Piping and Valves (series: GS EP PVV 1XX) GS EP PVV 101

List of piping documents to be supplied to Total

GS EP PVV 102

Standard drawings for accessories and equipment of piping -

GS EP PVV 107

Flexibility analysis

GS EP PVV 109

Allowable loads on static equipment (flanges and nozzles)

GS EP PVV 111

Piping design specification

GS EP PVV 112

Piping material classes

GS EP PVV 113

Block models

GS EP PVV 114

Design models

GS EP PVV 115

3D electronic models

GS EP PVV 116

Model review checklist

GS EP PVV 119

Metallic piping support design

GS EP PVV 142

Valves

GS EP PVV 143

Metallic pipes

GS EP PVV 144

Fittings

GS EP PVV 145

Flanges

GS EP PVV 146

Bolting for piping

GS EP PVV 147

Gaskets for piping and vessels

GS EP PVV 148

Glass-reinforced plastic. Piping materials (tubes and accessories)

GS EP PVV 149

Spring hangers and supports

GS EP PVV 150

Valves in cryogenic service

GS EP PVV 171

Steel piping fabrication

GS EP PVV 172

Hot tapping

GS EP PVV 173

Pneumatic testing of above ground piping systems

GS EP PVV 175

Cleaning of piping and vessels

GS EP PVV 178

Design and erection of glass-reinforced plastic (GRP) piping system

This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.

Page 4/9

Exploration & Production General Specification

Date: 10/2006

GS EP PVV 000

Rev: 04

2.3 Subsea Piping and Valves (refer to GS EP SPS xxx) GS EP SPS 004

Subsea manifold system gate valves

GS EP SPS 005

Subsea ball valves (formerly GS EP PVV 151)

GS EP SPS 006

Service valves in subsea stations

GS EP SPS 024

Subsea mechanical quarter turn actuators (manually operated gearbox) (formerly GS EP PVV 152)

GS EP SPS 025

Subsea hydraulic spring return quarter turn actuators formerly GS EP PVV 153)

2.4 Pressure Vessels (Series: GS EP PVV 2XX) GS EP PVV 201

List of pressure vessels documents to be supplied to Total

GS EP PVV 202

Standard drawings for accessories and equipment of vessels

GS EP PVV 211

Design and fabrication of pressure vessels according to ASME VIII div. 1 or div. 2

GS EP PVV 212

Design and fabrication of pressure vessels according to PD 5500

2.5 Storage Tanks (series: GS EP PVV 3XX) GS EP PVV 312

Design and fabrication of low pressure metallic vertical storage tanks

GS EP PVV 314

Design and construction of large LNG storage tanks (double walled metallic type)

GS EP PVV 315

Design and construction of large LPG storage tanks

This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.

Page 5/9

Exploration & Production General Specification

Date: 10/2006

GS EP PVV 000

Rev: 04

2.6 Heat Exchangers and Air Coolers (series: GS EP PVV 4XX) GS EP PVV 402

Standards for exchangers accessories and equipment

GS EP PVV 411

Shell and tube heat exchangers

GS EP PVV 412

Plate heat exchangers

GS EP PVV 414

Double pipe heat exchangers

GS EP PVV 415

Design and fabrication of air cooler

GS EP PVV 416

Gas/sea water shell and tube heat exchangers

GS EP PVV 441

Procedure for shop hydraulic tests of shell and tube heat exchangers

2.7 Heaters, Boilers and Flares (series: GS EP PVV 5XX) GS EP PVV 521

Flares

GS EP PVV 542

Fire tube boilers

2.8 Welding (series: GS EP PVV 6XX) GS EP PVV 611

Welding of pressure containing piping and equipment

GS EP PVV 612

Piping and equipment subject to Severe Sour Service. Metallurgical

GS EP PVV 613

Valves materials requirements for use in sour service

GS EP PVV 614

Welding of Duplex and Superduplex stainless steel

GS EP PVV 615

Welding of UNS 31254 alloy

GS EP PVV 616

Welding of titanium pipes and fittings

GS EP PVV 617

Welding of 3 ½ % Nickel steel (impact tested at minus 101°C)

GS EP PVV 618

Fabrication of alloy UNS 06625 Grade 1 materials

GS EP PVV 619

Piping components in duplex and superduplex stainless steel

GS EP PVV 620

Specification for fabrication and welding of piping systems in cupronickel and associated materials

GS EP PVV 622

Piping and equipment subject to Intermediate sour service. Metallurgical

GS EP PVV 630

TOFD Inspection

This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.

Page 6/9

Exploration & Production General Specification

Date: 10/2006

GS EP PVV 000

Rev: 04

2.9 Thermal Insulation and Heat Tracing (series: GS EP PVV 7XX) GS EP PVV 771

Thermal insulation (hot service)

GS EP PVV 772

Thermal insulation (cold service)

GS EP PVV 773

Thermal insulation (cyclic service)

2.10 Skid Mounted Units (series: GS EP PVV 8XX) GS EP PVV 811

Diatom earth pre-coat filters

GS EP PVV 812

Skid mounted flotation units

GS EP PVV 813

Skid mounted units for static equipment

GS EP PVV 814

Skid mounted units for chemical products injection systems

2.11 Inspection (series: GS EP PVV 9XX) GS EP PVV 912

Piping fabrication facilities survey

GS EP PVV 913

Quality assurance questionnaire for piping fabrication

GS EP PVV 920

Inspection procedure for pressure vessels

GS EP PVV 921

Check list for inspection of pressure vessels

GS EP PVV 922

Plant survey, pressure vessels and heat exchangers

GS EP PVV 923

Vendor Quality Assurance Questionnaire – Pressure Vessels and Heat Exchangers

GS EP PVV 924

Agenda for technical audit of Pressure Vessels and Heat Exchangers manufacturers

GS EP PVV 929

In-service inspection for HIC/SSCC checks on pressure vessels

GS EP PVV 942

Shop survey - Valves

GS EP PVV 943

Quality assurance questionnaire - Valves

This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.

Page 7/9

Exploration & Production General Specification

Date: 10/2006

GS EP PVV 000

Rev: 04 Appendix 1

Appendix 1

Correspondence between Total and (former) Elf General Specifications Instead of:

Elf reference

Elf General Specification Title

Use: Total reference

SG CHO 001.P Design and fabrication of metallic unfired pressure vessels and tubular heat exchangers

GS EP PVV 201 or 202 or 411

SG CHO 002.P Design and fabrication of air cooler

GS EP PVV 415

SG CHO 003.P Design and fabrication of low pressure metallic vertical storage tanks

GS EP PVV 312

SG CHO 004.P Design and fabrication of flotation units

GS EP PVV 812

SG CHO 009.P Design and construction of diatom earth precoat filter

GS EP PVV 811

SG CHO 010.P Design and fabrication of pressure vessel packages GS EP PVV 813 SG CHO 011.P Supply of skids for chemical product injection systems

GS EP PVV 814

SG ISL 002.P

Thermal insulation (hot service)

GS EP PVV 771

SG ISL 003.P

Thermal insulation (cold service)

GS EP PVV 772

SG ISL 004.P

Thermal insulation (cyclic service)

GS EP PVV 773

SG MAS 001.P Materials for sour service (upstream applications) design

GS EP COR 170

SG MAS 002.P Supply of materials for sour services

GS EP PVV 612 or 622

SG TUY 001.P

Design of piping systems

GS EP PVV 111

SG TUY 002.P

Piping classes

GS EP PVV 112

SG TUY 003.P

Installation of metallic piping systems

GS EP PVV 171

SG TUY 004.P

Supply of glass fibre reinforced plastic piping made GS EP PVV 148 by filament winding

SG TUY 005.P

Design and installation of glass reinforced plastic (GRP) piping

GS EP PVV 178

SG TUY 008.P

Non destructive examination of valves for high pressure service

Incorporated in GS EP PVV 142

SG TUY 009.P

Welding of Duplex and Superduplex Stainless steel GS EP PVV 614 pipework

SG TUY 031.P

Supply of subsea ball valves

GS EP PVV 151

This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.

Page 8/9

Exploration & Production General Specification

Date: 10/2006

GS EP PVV 000

Rev: 04 Appendix 2

Appendix 2

Correspondence between Total and (former) TotalFina General Specifications Instead of:

TotalFina reference

TotalFina General Specification Title

SP TCS XXX

Use: Total reference GS EP PVV XXX

Except: SP TCS 151

Carbon steel subsea ball valves

GS EP SPS 005

SP TCS 152

Subsea mechanical quarter turn actuators (manually operated gearbox)

GS EP SPS 024

SP TCS 153

Subsea hydraulic spring return quarter turn actuators

GS EP SPS 025

SP TCS 311

Design, fabrication and erection of spherical tanks deleted

SP TCS 413

Spool wound heat exchangers

deleted

SP TCS 772

Design and installation rules for electric tracing of piping and equipment

deleted

SP TCS 773

Hot oil tracing of piping

deleted

SP TCS 774

Installation rules for jacketed piping

deleted

SP TCS 775

Heat insulation of piping in hot service

GS EP PVV 771

SP TCS 776

Heat insulation of equipment in hot service

GS EP PVV 771

SP TCS 779

Heat insulation of equipment and piping in cold services with expanded cork

GS EP PVV 772

SP TCS 922

Inspection procedure for pressure vessels

GS EP PVV 920

SP TCS 923

In-service inspection for HIC/SSCC checks on pressure vessels

GS EP PVV 929

SP TCS 942

Plant survey, pressure vessels and heat exchangers

GS EP PVV 922

SP TCS 943

Vendor Quality Assurance Questionnaire – Pressure Vessels and Heat Exchangers

GS EP PVV 923

SP TCS 944

Agenda for technical audit of Pressure Vessels and Heat Exchangers manufacturers

GS EP PVV 924

SP TCS 952

Shop survey valves

GS EP PVV 942

SP TCS 953

Quality assurance questionnaire valves

GS EP PVV 943

This document is the property of Total. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.

Page 9/9