Great American Scrollsaw Patterns Vol. 2

SCROLLSAW PATTERNS: Following are the full-size scrollsaw patterns for creating beautiful projects from our CD Scrollsaw Pattern Book. Each pattern is shaded to make it easier to see where to cut and where not to cut. To navigate from page to page, simply use the vertical scrollbar on the right hand side of the screen, or the “Go To” buttons located at the top and bottom of the screen. To print, simply click on the “Printer Icon” at the top of the screen, or choose “Print” from the “File” pull-down menu. Be sure to specify which page numbers you want to print, and the number of copies. You can determine the page number from the “Page #” box 4 of 107 at the bottom of the screen. When finished, click the “First Page” button to go back to the beginning to choose another section to view. GREAT AMERICAN PATTERNS TM

Simply click on the button of your choice. INTRO

PHOTOS

HOW-TO

MORE CD’S AVAILABLE

PATTERNS

BACK TO START

Pattern overlap line

Stock: 1/4” Assemble with #18 x 5/8” finish nails and glue. Top pattern piece.

Crest

Victorian Display Stand

Victorian Display Stand

Pattern overlap line

Stock: 1/4” Bottom left pattern piece.

Assemble with #18 x 5/8” finish nails and glue.

Pattern overlap line

Crest

Pattern overlap line

Pattern overlap line

Crest

Stock: 1/4” Bottom right pattern piece.

Stock: 1/4” Top pattern piece.

Back

Pattern overlap line

Victorian Display Stand

Stock: 1/4” Bottom pattern piece.

Back

Pattern overlap line Victorian Display Stand

Victorian Display Stand

Side Stock: 1/4", cut 2 Attach to Back and Bottom with glue and #18 x 5/8” finishing nails.

Victorian Display Stand

Cut ends at 45°

Roof

Cut ends at 45°

Roof, end view

Back

Stock: 1/4” Cut 2. Glue and nail to Back

Victorian Display Stand

Bottom Stock: 1/4”

Roundover 1/4” R

Victorian Display Stand

Roundover 1/4” R.

Base Stock: 1/4” Left pattern piece.

Pattern overlap line

Bottom

Back

Victorian Display Stand

Base Stock: 1/4” Right pattern piece.

Pattern overlap line

Bottom

Back

Nativity Scene

Left Frame Stock: 1/4" - 3/8"

Center 3/4" 1 1/2" Hinges where indicated

Nativity Scene

Center Frame Stock: 1/4” - 3/8”

Nativity Scene

Right Frame Stock: 1/4” - 3/8”

Center 3/4" 1 1/2" hinges where indicated

Pattern overlap line

Wedding Anniversary Heart

Frame Stock: 1/4” - 3/8” Left pattern piece.

Pattern overlap line

Wedding Anniversary Heart

Frame Stock: 1/4” - 3/8” Right pattern piece.

Victorian Cross with Shelf

Bracket Stock 1/4”

Stock: 1/4” Bottom pattern piece. Attach Shelf and Bracket with glue.

Back

Adjust slots, if necessary, for the thickness of material used.

Pattern overlap line

Victorian Cross with Shelf

Stock: 1/4” Top pattern piece.

Back

Pattern overlap line

Victorian Cross with Shelf

Stock 1/4”

Shelf

Victorian Cross with Shelf

Wildlife Clock

12 3

9 6

Option: drill for hanging clock.

Frame Stock: 3/8”

Bore a 2 3/8” hole for a 2 3/4” clock insert

Option: cut on dashed line for hanging clock.

Base Stock: 3/8”

Adjust slot, if necessary, for thickness of material you are using. Secure with glue or silicone.

Victorian Sconce

Back Stock: 3/4” Top pattern piece.

Side View 1/4" R Typ. 3 1/2° 1/4"

Veneer on plywood backer.

Pattern overlay line

Victorian Sconce

Pattern overlap line

Rabbet back side for fretted insert

Back Stock: 3/4” Bottom pattern piece.

Roundover front edges 1/4” R.

.

Drill a 1/16” hole to start bevel cut. Cut clockwise with table tilting down to the right at 3 1/2° or cut counterclockwise with table tilting down to the left at 3 1/2°.

Roundover front edges 1/4” R. Drill and countersink back side for #9 x 1 1/2” F.H. screws.

Victorian Sconce

In

Sto ser ck: t 1/4 "

Victorian Sconce

Roundover front edge 1/4” R.

Optional: Drill hole or add candle cups

Shelf Stock: 3/4"

Anniversary Plate

Note: Use repositionable spray adhesive to attach the pattern to the work pieces. Cut the interior Plate Design and the Rim Design. Use glue or silicone to attach the Rim to the Interior Design. Finish as desired.

Interior Plate Design Stock: 1/4” - 3/8”

Anniversary Plate

Rim Design

Dashed line indicates position of Interior Plate Design on back of Rim

Pattern overlap line

Stock: 1/8” - 1/4” Left pattern piece.

Anniversary Plate

Rim Design Stock: 1/8” - 1/4” Right pattern piece.

Numbers Pattern overlap line

Stock: 1/16” - 1/4” Secure in place with glue or silicone.

Victorian Clock

Assembly Instructions Assemble by first attaching the Aprons to the End Aprons. Then attach the Base to this assembly and the Bottom to the Base. Next attach the Front and Back to the Sides. Then attach the Roof, Side inserts, and Crest. Next position this assembly over the Bottom and secure in place with glue or silicone. Attach the Rail, and finish as desired.

C

J A

B 11

12

1 2

10

3

9 4

8 6

5

F

L D G

I H

Description Front Back Crest Rail Side Side Insert Base Apron End Apron Roof Overlay Bottom

Item Qty A B C D E F G H I J K L

1 1 1 1 2 2 1 2 2 2 1 1

Stock: 1/4”

Victorian Clock Rail (D)

7

Stock: 1/4”, cut 2

F

K

End Apron (I)

E

Dashed line indicates placement of Overlay

Attach to Sides with glue and #18 x 5/8” finishing nails.

Bore a 2 3/8” hole for 2 3/4” clock insert in Front only.

Cut design in Front only.

Stock: 1/4”, cut 1 each Top pattern piece.

Stock: 1/4”, cut 1 each Bottom pattern piece.

Front (A) & Back (B)

Front (A) & Back (B)

Pattern overlap line

Pattern overlap line

Victorian Clock

Use glue and finishing nails to attach to Front of Roof.

Stock: 1/4”

Crest (C)

Victorian Clock

Victorian Clock

Top

Side (E) Stock: 1/4”, cut 2 Attach to End Aprons with glue and finishing nails

Side Insert (F) Stock: 1/4”, cut 2

Apron (H)

Stock: 1/4”, cut 2

Top

Apron

Stock: 1/4”

Bottom (L)

Stock: 3/8” - 1/2”

Base (G)

Small dashed line indicates placement of Bottom (L)

Slot for Rail (D)

Use glue and #18 x 5/8” finishing nails to attach Base (G) to Aprons.

Victorian Clock

End Apron

End Apron

Victorian Clock

45° Cut at 45° Front

Roof (J)

Side view of Roof

Stock: 1/4”, cut 2

Cut at 45° 45°

Overlay (K) Stock: 1/4”

Bore a 2 3/8” hole for 2 3/4” clock insert.

Small Shelves

Back Stock: 3/8"

Back Stock: 3/8"

Small Shelves

Shelf Stock: 3/8"

Attach to Back with glue and #18 x 3/4” finishing nails or countersink for #4 x 5/8” F.H. screws.

Pattern overlap line

Glue bars into place

Cut two vertical stiles

Stock: 3/4”, cut 2 Top pattern piece.

Side

Earring Holder

Pattern overlap line

Roundover top edges 1/4” R.

Roundover top edges 1/4” R.

Drill for shaker pegs to hole necklaces

Top Stock: 3/4’ Left pattern piece.

Drill and countersink back side to attach Sides with #9 x 1 1/2” F.H. screws.

.

Stock: 3/4” Cut 2 Bottom pattern piece.

Side

Continuous groove, 1/4” x 5/16” deep

Pattern overlap line

1/4” R roundover, forward edges only.

Earring Holder

3 1/2° 1/4" R

Pattern ovelap line

Side view of raised heart section

Top Stock: 3/4’ Right pattern piece.

. Drill a 1/16” hole to start bevel cut. Cut clockwise with table tilting down to the right at 3 1/2° or cut counterclockwise with table tilting down to the left at 3 1/2°.

Stock: 3/4” Right pattern piece.

Base

Drill and countersink bottom side to attach stiles with #9 x 1 1/2” F.H. screws.

Stock: 3/4” Left pattern piece.

Base

Roundover top edge 1/4” R

Earring Holder Pattern overlap line

Pattern overlap line

Earring Holder

Pattern overlap line

Bar

Stock: 1/4” Cut 5 complete Bars Right pattern piece.

Bar

Stock: 1/4” Cut 5 complete Bars Left pattern piece.

Pattern overlap line

Collapsible Basket

Drill 1/8” pivot hole before sawing basket free. After routing 1/4” R countersink screws.

Drill a 1/16” hole to start bevel spiral cut. Saw at 3 1/2° with table tilting down to the left and using a #9 blade.

. Frame Stock: 3/4" Left pattern piece.

Pattern overlap line

Roundover 1/4” R.

Drill & countersink 1/8”. Attach pivot foot with #6 x 3/4” F.H. screw.

Pattern overlap line

Collapsible Basket

Roundover 1/4” R outside edges

. Frame Stock: 3/4" Right pattern piece.

Drill 1/8” pivot hole before sawing basket free. After routing 1/4”R countersink for #6 x 1 1/4” F.H. screws.

Drill a 1/16” hole to start bevel spiral cut. Saw at 3 1/2° with table tilting down to the left using a #9 blade.

Pattern overlap line

Collapsible Basket

. Frame Stock: 3/4" Left pattern piece.

Roundover 1/4” R.

1/8” drill & countersink. Attach pivot foot with #6 x 3/4” F.H. screw.

Collapsible Basket

Pattern overlap line

Roundover 1/4” R outside edges

. Frame Stock: 3/4" Right pattern piece.

Drill 1/8” pivot hole before sawing basket free. After routing 1/4” R countersink for #6 x 1 1/4” F.H. screws.

Drill a 1/16” hole to start bevel spiral cut. Saw at 3 1/2° with table tilting down to the left and using a #9 Olson blade.

Pattern overlap line

Collapsible Basket

. Frame Stock: 3/4" Left pattern piece.

Roundover 1/4” R

1/8” drill & countersink. Attach pivot foot with #6 x 3/4” F.H. screw.

Collapsible Basket

.

Pattern overlap line

Roundover 1/4” R outside edges

Frame Stock: 3/4" Right pattern piece.

Friendship Plate

Rim Design

Pattern overlap line

Stock: 1/8” - 1/4” Top left pattern piece.

Enlarging or reducing this pattern will allow you the flexibility of fitting it to the location where you choose to display it. Also, using contrasting woods or stains will produce the most stricking effect.

Pattern overlap line

Friendship Plate

Rim Design

Dashed line indicates position of Interior Design on back of Rim. Use glue and/or finishing nails to attach Interior Design to the back of the Rim.

Stock: 1/8” - 1/4” Bottom pattern piece.

Rim Design

Pattern overlap line

Pattern overlap line

Stock: 1/8” - 1/4” Top right pattern piece.

Pattern overlap line

Pattern overlap line

Friendship Plate

Interior Design

Stock: 1/4” - 3/8” Right pattern piece.

Interior Design

Stock: 1/4” - 3/8” Left pattern piece.

Pattern overlap line

Corner Shelf Apply a small amount of glue to each side of tabs before assembly.

Shelf Stock: 1/4”, cut 2

Assemble by first inserting the Shelf tabs into one Side. Then attach the remaining Side.

Side (A) & (B) Stock: 1/4”, cut 1 each as indicated. Top pattern piece.

Pattern overlap line

Cut on this line for Side (A) Cut on this line for Side (B)

Adjust slots, if necessary for thickness of material used. Pattern overlap line

Attach Sides with glue and or #18 x 5/8” finishing nails.

Corner Shelf

Side (A) & (B) Stock: 1/4”, cut 1 each as indicated Bottom pattern piece.

Victorian Book Rack

B

r Sto ack ck: et 1/4 ”

First attach the Top and Bottom and Bracket to One Side. Attach the remaining Side.

Stock: 1/4”, cut 2

Side

Attach Top, Bottom and Bracket with glue and #18 x 5/8” finishing nails.

Pattern overlap line

Victorian Book Rack

Stock: 1/4”, cut 2 Bottom pattern piece.

Side

Pattern overlap line

Victorian Book Rack

Stock: 1/4”, cut 1 each

Top & Bottom

Victorian Book Rack

Carriage Planter / Candy Holder

Carriage Planter / Candy Holder C F

G D

E

A

B E

I

H

Assemble by first inserting the tabs of pieces B, C, D, E and F into one Side. Secure with glue. Then attach the remaining Side. Next, slide pieces G into place on the front and back of carriage. Finally, attach the Wheels with glue. Note: This carriage can be used for a variety of purposes - fill with candy, silk flowers, hair ribbons, pencils, guest soaps, potpourri. The possibilities are endless - just use your imagination. Fill with special treats for a unique gift basket!

Description Item Qty Side A 2 Floor B 1 Seat C 1 Foot Rest D 1 Axle E 2 Spacer F 1 Front & Back G 1 ea Front Wheel H 2 Back Wheel I 2 Floor (B) Stock: 1/8”

Seat (C) Stock: 1/8”

Foot Rest (D) Stock: 1/8”

Spacer (F) Stock: 1/8”

Axle (E) Stock: 1/8”, cut 2

D

E

C

D

G

Stock: 1/8”, cut 2

Side (A)

B

Note: Adjust slots, if necessary, for the thickness of material used.

G

E

F

Carriage Planter / Candy Holder

Carriage Planter / Candy Holder

Front Wheel (H) Stock: 1/8”, cut 2

Front & Back (G) Stock: 1/8”, cut 1 each

Back Wheel (I) Stock: 1/8”, cut 2

Music Box

Top

1 2 Back

3 Back

3/4

Foot Instructions 1. Attach pattern with repositionable spray. 1” 2. Cut out back shape 3. Cut out the top shape 4. Attach Foot with glue and finishing nails or silicone

Side view of Music Box Top

Metal Turntable

Music Box Key For music box tune selection and pricing, call THE BERRY BASKET at 1-800-206-9009.

Assembly Instructions Assemble by first attaching the Top to the Frame with glue and finishing nails or silicone. Next attach the music box movement to the topside of the Bottom with screws or silicone. Before the silicone sets, be sure to position the Frame over the Bottom to make sure the music box movement is aligned correctly. Then secure the Bottom to the Frame. Next, attach the Feet where indicated, securing with wood glue or silicone. Finish as desired. NOTE: It is important that the music box movement bottom is in contact with the wood (topside of the Bottom) in order to have the best tone. If using silicone, be careful to not use too much as it may squeeze out from between the 2 pieces and get into the movement itself.

Front

Foot

Top view.

Stock: 3/4”, cut 2 Fold on dashed line Rear view

Frame Stock: 1 1/2” Circle indicates position of key.

Cut out for music box

Note: Top is not intended to be used with a turntable. Secure the Top to the Frame with glue or silicone.

Music Box

Top Stock: 1/4”

Music Box

Bottom Stock: 1/4”

Dashed line indicates position of Frame

Drill 3/8” in Bottom for key.

Small dashed line indicates placement of Foot on Bottom.

Countersink bottomside of Bottom and attach to Frame with #6 x 3/4” screws.

Large Mantle Clock

12 3

9 6

Bore a 3” hole for a 3 1/2” O.D. clock insert.

Roundover front edges 1/4” R.

3/4" 1/4" 1/4"

Frame Stock: 3/4" Left pattern piece. Rabbet backside for fretted insert.

Pattern overlap line

1/4" R

1/4" R

Pattern overlap line

Large Mantle Clock

Frame Stock: 3/4” Right pattern piece.

Stock: 1/4”

Insert

Large Mantle Clock

Stock: 1/4"

Insert

Large Mantle Clock

Stock: 1/4"

Insert

Large Mantle Clock

Large Mantle Clock

Pattern overlap line

Base Stock: 3/4” Right pattern piece.

Roundover top edge 1/4” R.

Base Stock: 3/4” Left pattern piece.

Drill and countersink bottom side for #9 x 1 1/2” F.H. screws.

Pattern overlap line

Stock: 1/4"

Frame

9

Bore 1 3/8” hole for clock insert.

12 3

Victorian Desk Set

6

1/4” groove, 3/8” deep

Stock: 3/4"

Base

Drill for pen and funnel set

Stock: 1/4”, cut 2

Card Bracket

Roundover top edge 1/4” R before grooving.

Victorian Desk Set

Card Bracket

Card Bracket

Drill for pen and funnel set

Roundover top edge 1/4” R.

Stock: 1/2” - 3/4”

Base

9

Drill and countersink bottomside for #7 x 1 1/2” F.H. screws.

Executive Desk Set

12 3

6

Executive Desk Set

Frame Stock: 1/2” - 3/4”

Bore 3” hole for 3 1/2” O.D. clock insert.

Wildlife Lamp

Assembly Instructions Assemble by first inserting the tabs in the Bottom and Top into one Side containing the 2 slots. Secure with glue. Attach the remaining Side containing the 2 slots. Then slide the remaining Sides into position. Assemble the lamp as per instructions. Finish as desired. Option: use contrasting material behind design if desired. Note: order lamp kit #A243 or #A251 to complete.

Bottom and Top Stock: 1/4”, cut 1 each

Drill 3/8" to insert lamp rod.

Top

Top

Cut two sides with top slots

Cut two sides with top slots

Wildlife Lamp

Stock: 1/4”, cut 4 Bottom

Bottom Cut slots on two Sides only

Adjust slots, if necessary, for thickness of material you are using.

Cut two sides with bottom slots

Cut two sides with bottom slots

Side

Ornamental Frame

Overlay Stock: 1/16” - 1/4”

Pattern overlap line

Stock: 1/4” - 3/8” Top pattern piece.

Frame

Ornamental Frame

Stock: 1/4” - 3/8” Bottom pattern piece.

Frame

Pattern overlap line

Ornamental Frame

Holiday Plate

Rim Design

Pattern overlap line

Stock: 1/4” Left pattern piece.

Holiday Plate

Rim Design

Star Stock: 1/16” - 1/8”

Pattern overlap line

Stock: 1/4” Right pattern piece.

Stock: 1/8” - 1/4”

#2 - Interior Plate Design

Holiday Plate

Wildlife Wall Clock

Bore 1 3/8” hole for clock insert or picture frame.

Frame Stock: 1/4” - 3/8”

Rockin’ Reindeer

Drill for 1/4” dowel

Side Stock: 3/4”, cut 2 Left pattern piece.

Pattern overlap line

Dashed line indicates placement of Body.

Rockin’ Reindeer Drill for 1/4” dowel

Antler

Pattern overlap line

stock: 3/4”, cut 2

Side Stock: 3/4”, cut 2 Right pattern piece.

Drill for 1/4” dowel Dashed line indicates placement of Body.

Drill for 1/4” dowel

Drill for 1/4” dowel

Stock: 1 1/2”

Body

Dashed line indicates placement of Antlers

Drill for 1/4” dowel

Rockin’ Reindeer

Sleigh

Seat Stock: 1/2”

Sleigh

Side Stock: 1/2”, cut 2 Left pattern piece.

Drill and countersink for #7 x 1 1/4” F.H. screws.

Pattern overlap line

Roundover outside edges 1/4” R.

Sleigh

Pattern overlap line

Roundover outside edges 1/4” R.

Side Stock: 1/2”, cut 2 Right pattern piece.

Sleigh

Back Stock: 1/2”

Drill and countersink backside to attach Seat with #6 x 1 1/4” F.H. screws.

Napkin / Letter Holder

Frame Stock: 3/4" Cut 2

3/4"

Roundover, 1/4” R.

1/4"

1/4"

Rabbet backside for fretted insert

Insert Stock: 1/4” Cut 2

Napkin / Letter Holder

Insert Stock: 1/4” Cut 2

Insert Stock: 1/4” Cut 2

Roundover top edge 1/4” R.

Drill and countersink bottomside to attach Frames with #6 x 1” F.H. screws.

Stock: 3/4”

Base

Napkin / Letter Holder

Birdhouse

Roof

Back

Front

Stock: 1/4” Cut 2

Note: saw ends at 60°

Attach to front edge of Roof with glue and #18 x 5/8” wire brads.

Stock: 1/4” Cut 2

Front & Back Overlay

Birdhouse

Attach to front edge of Roof with glue and #18 x 5/8” wire brads.

Stock: 1/4” Cut 2

Front & Back Overlay

Birdhouse

Birdhouse

Side Stock: 1/4” Cut 2

60°

Cut edge at 60°

Bottom Stock: 1/4”

Stock: 1/4”, cut 1 each Assemble with #6 x 3/4” brass screws or #18 x 5/8” finishing nails and glue.

Front /Back

1/4” diameter x 4” dowel

Drill 1 1/4” diameter hole in Front only.

Birdhouse