GrantPrideco Drill Pipe Data Tables

G R A N T

P R I D E C O

Drill pipe data tables The following tables provide data for the drill string. Data are given for the pipe body, tool joint, and drill pipe assembly.

The tool joint sizes displayed represent common O.D. and I.D. configurations, although additional size combinations are available.

Pipe Data Size OD in. 2 2 2 2 2 2 2 2 2 2

3/8

3/8

3/8

3/8

3/8

3/8

7/8

7/8

7/8

7/8

Nominal Weight lb/ft

Grade and Upset Type

Torsional Yield Strength ft-lb

Tensile Yield Strength lb

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.65 6.85 6.85 6.85 6.65 6.85 6.85 6.85 6.85 6.85 6.65 6.85 6.85 6.85 6.85 6.85 6.65 6.85 6.85 6.85 6.85 6.85 6.65 6.85 6.85

E-75 EU E-75 EU E-75 EU X-95 EU X-95 EU X-95 EU G-105 EU G-105 EU G-105 EU S-135 EU S-135 EU S-135 EU S-135 EU Z-140 EU Z-140 EU Z-140 EU Z-140 EU V-150 EU V-150 EU V-150 EU V-150 EU E-75 IU E-75 IU E-75 EU E-75 IU E-75 EU E-75 EU X-95 IU X-95 IU X-95 EU X-95 IU X-95 EU X-95 EU G-105 IU G-105 IU G-105 EU G-105 IU G-105 EU G-105 EU S-135 IU S-135 IU S-135 EU S-135 IU S-135 EU S-135 EU

6,300 6,300 6,300 7,900 7,900 7,900 8,800 8,800 8,800 11,300 11,300 11,300 11,300 11,700 11,700 11,700 11,700 12,500 12,500 12,500 12,500 8,100 8,100 8,100 8,100 8,100 8,100 10,200 10,200 10,200 10,200 10,200 10,200 11,300 11,300 11,300 11,300 11,300 11,300 14,500 14,500 14,500 14,500 14,500 14,500

138,200 138,200 138,200 175,100 175,100 175,100 193,500 193,500 193,500 248,800 248,800 248,800 248,800 258,000 258,000 258,000 258,000 276,400 276,400 276,400 276,400 135,900 135,900 135,900 135,900 135,900 135,900 172,100 172,100 172,100 172,100 172,100 172,100 190,300 190,300 190,300 190,300 190,300 190,300 244,600 244,600 244,600 244,600 244,600 244,600

0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217

1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 1.815 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441

1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.843 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812

Pipe Body Section Modulus cu in. 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 0.867 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121

Pipe Body Polar Section Modulus cu in.

Internal Pressure psi

1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 1.733 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241

15,474 15,474 15,474 19,600 19,600 19,600 21,663 21,663 21,663 27,853 27,853 27,853 27,853 28,884 28,884 28,884 28,884 30,947 30,947 30,947 30,947 9,907 9,907 9,907 9,907 9,907 9,907 12,548 12,548 12,548 12,548 12,548 12,548 13,869 13,869 13,869 13,869 13,869 13,869 17,832 17,832 17,832 17,832 17,832 17,832

Collapse Pressure psi 15,599 15,599 15,599 19,759 19,759 19,759 21,839 21,839 21,839 28,079 28,079 28,079 28,079 29,119 29,119 29,119 29,119 31,199 31,199 31,199 31,199 10,467 10,467 10,467 10,467 10,467 10,467 12,940 12,940 12,940 12,940 12,940 12,940 14,020 14,020 14,020 14,020 14,020 14,020 17,034 17,034 17,034 17,034 17,034 17,034

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

44

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

Grant Prideco offers all API tool joint connections as well The technical data are calculated per API RP7G Latest as most non-API connections. Custom specifications and Edition and API Spec 5D Latest Edition. special sizes can be provided to meet specific requirements.

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb NC26 HT26 SLH90 NC26 HT26 SLH90 NC26 HT26 SLH90 NC26 HT26 SLH90 GPDS26 XT24 XT26 HT26 GPDS26 XT24 XT26 HT26 GPDS26 NC26 HT26 NC31 XT26 HT31 XT31 NC26 HT26 NC31 XT26 HT31 XT31 NC26 HT26 NC31 XT26 HT31 XT31 NC26 HT26 NC31 XT26 HT31 XT31

3 3/8 3 3/8 3 1/4 3 3/8 3 3/8 3 1/4 3 3/8 3 3/8 3 1/4 3 5/8 3 3/8 3 1/4 3 1/2 3 1/8 3 3/8 3 3/8 3 1/2 3 1/8 3 3/8 3 3/8 3 1/2 3 3/8 3 3/8 4 1/8 3 3/8 4 4 3 1/2 3 3/8 4 1/8 3 3/8 4 4 3 5/8 3 3/8 4 1/8 3 3/8 4 4 3 5/8 3 1/2 4 1/8 3 3/8 4 4

1 3/4 1 3/4 1 13/16 1 3/4 1 3/4 1 13/16 1 3/4 1 3/4 1 13/16 1 1/2 1 5/8 1 11/16 1 11/16 1 1/2 1 5/8 1 5/8 1 5/8 1 3/8 1 1/2 1 1/2 1 1/2 1 3/4 1 3/4 2 5/32 1 3/4 2 5/32 2 3/8 1 1/2 1 3/4 2 5/32 1 3/4 2 5/32 2 3/8 1 3/4 1 3/4 2 5/32 1 3/4 2 5/32 2 3/8 1 1/2 1 1/2 2 1/8 1 3/4 2 5/32 2 3/8

6,900 8,700 6,900 6,900 8,700 6,900 6,900 8,700 6,900 9,000 9,500 7,700 9,700 9,500 12,600 9,500 10,500 10,400 13,200 10,100 11,200 6,900 8,700 11,500 11,500 14,900 13,200 8,800 8,700 11,500 11,500 14,900 13,200 7,200 8,700 11,500 11,500 14,900 13,200 9,000 12,100 11,900 11,500 14,900 13,200

313,700 313,700 270,200 313,700 313,700 270,200 313,700 313,700 270,200 390,300 353,400 311,500 333,900 261,500 330,600 353,400 353,400 295,400 367,400 390,300 390,300 313,700 313,700 434,500 290,900 434,500 309,100 390,300 313,700 434,500 290,900 434,500 309,100 313,700 313,700 434,500 290,900 434,500 309,100 390,300 390,300 447,100 290,900 434,500 309,100

3,900 5,200 3,700 3,900 5,200 3,700 3,900 5,200 3,700 4,900 5,700 4,200 5,800 5,700 7,600 5,700 6,300 6,200 7,900 6,100 6,700 3,900 5,200 6,200 6,900 8,900 7,900 4,900 5,200 6,200 6,900 8,900 7,900 3,900 5,200 6,200 6,900 8,900 7,900 4,900 7,300 6,400 6,900 8,900 7,900

Assembly Data Torsional Ratio Tool Joint to Pipe

* Pin Tong Space in.

* Box Tong Space in.

Adjusted Weight lb/ft

Minimum Tool Joint OD for Prem. Class in.

1.10 1.38 1.10 0.87 1.10 0.87 0.78 0.99 0.78 0.80 0.84 0.68 0.86 0.81 1.08 0.81 0.90 0.83 1.06 0.81 0.90 0.85 1.07 1.42 1.42 1.84 1.63 0.86 0.85 1.13 1.13 1.46 1.29 0.64 0.77 1.02 1.02 1.32 1.17 0.62 0.83 0.82 0.79 1.03 0.91

9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 9 9 10 10 9 9 9 9 9 10 9 10 9 9 9 10 9 10 9 9 9 10 9 10 9 9 9 10 9 10

10 12 10 10 12 10 10 12 10 10 12 10 10 15 15 12 10 15 15 12 10 10 12 11 15 13 15 10 12 11 15 13 15 10 12 11 15 13 15 10 12 11 15 13 15

7.17 7.25 7.00 7.17 7.25 7.00 7.17 7.25 7.00 7.62 7.35 7.10 7.35 7.32 7.52 7.35 7.39 7.41 7.62 7.45 7.48 7.19 7.27 7.88 7.43 7.83 7.75 7.50 7.27 7.88 7.43 7.83 7.75 7.46 7.27 7.88 7.43 7.83 7.75 7.64 7.60 7.91 7.43 7.83 7.75

3 3/16 N/A 3 1/32 3 1/4 N/A 3 3/32 3 9/32 N/A 3 1/8 3 13/32 N/A 3 7/32 3 5/16 2 15/16 3 1/32 N/A 3 5/16 2 15/16 3 N/A 3 9/32 3 9/32 N/A 3 11/16 2 29/32 3 1/2 3 13/32 3 3/8 N/A 3 3/4 3 1/32 3 19/32 3 1/2 3 13/32 N/A 3 13/16 3 1/16 3 5/8 3 17/32 3 17/32 3 5/16 3 29/32 3 7/32 3 23/32 3 5/8

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 1 5/8 1 5/8 1 11/16 1 5/8 1 5/8 1 11/16 1 5/8 1 5/8 1 11/16 1 3/8 1 1/2 1 9/16 1 9/16 1 3/8 1 1/2 1 1/2 1 1/2 1 1/4 1 3/8 1 3/8 1 3/8 1 5/8 1 5/8 2 1/32 1 5/8 2 1/32 2 1/4 1 3/8 1 5/8 2 1/32 1 5/8 2 1/32 2 1/4 1 5/8 1 5/8 2 1/32 1 5/8 2 1/32 2 1/4 1 3/8 1 3/8 2 1 5/8 2 1/32 2 1/4

0.134 0.134 0.134 0.134 0.134 0.134 0.134 0.134 0.134 0.132 0.133 0.133 0.133 0.131 0.132 0.133 0.133 0.130 0.131 0.131 0.132 0.236 0.235 0.239 0.234 0.239 0.242 0.234 0.235 0.239 0.234 0.239 0.242 0.236 0.235 0.239 0.234 0.239 0.242 0.234 0.233 0.239 0.234 0.239 0.242

0.110 0.111 0.107 0.110 0.111 0.107 0.110 0.111 0.107 0.117 0.112 0.109 0.112 0.112 0.115 0.112 0.113 0.113 0.117 0.114 0.114 0.110 0.111 0.120 0.114 0.120 0.118 0.115 0.111 0.120 0.114 0.120 0.118 0.114 0.111 0.120 0.114 0.120 0.118 0.117 0.116 0.121 0.114 0.120 0.118

2 3/8

2 3/8

2 3/8

2 3/8

2 3/8

2 3/8

2 7/8

2 7/8

2 7/8

2 7/8

*2” Longer than standard.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

45

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in. 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8

Nominal Weight lb/ft 6.85 6.65 6.85 6.85 6.85 6.65 6.85 6.85 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40

Grade and Upset Type Z-140 IU Z-140 IU Z-140 EU Z-140 EU V-150 IU V-150 IU V-150 EU V-150 EU E-75 EU E-75 EU E-75 EU E-75 IU E-75 EU E-75 IU E-75 EU X-95 EU X-95 IU X-95 EU X-95 IU X-95 EU X-95 IU X-95 EU G-105 EU G-105 IU G-105 EU G-105 IU G-105 EU G-105 IU G-105 EU S-135 EU S-135 IU S-135 EU S-135 IU S-135 EU S-135 IU S-135 EU S-135 EU Z-140 IU Z-140 EU Z-140 IU Z-140 EU Z-140 EU V-150 IU V-150 EU V-150 IU V-150 EU V-150 EU

Torsional Yield Strength ft-lb 15,100 15,100 15,100 15,100 16,200 16,200 16,200 16,200 11,600 11,600 11,600 11,600 11,600 11,600 11,600 14,600 14,600 14,600 14,600 14,600 14,600 14,600 16,200 16,200 16,200 16,200 16,200 16,200 16,200 20,800 20,800 20,800 20,800 20,800 20,800 20,800 20,800 21,600 21,600 21,600 21,600 21,600 23,100 23,100 23,100 23,100 23,100

Tensile Yield Strength lb 253,700 253,700 253,700 253,700 271,800 271,800 271,800 271,800 214,300 214,300 214,300 214,300 214,300 214,300 214,300 271,500 271,500 271,500 271,500 271,500 271,500 271,500 300,100 300,100 300,100 300,100 300,100 300,100 300,100 385,800 385,800 385,800 385,800 385,800 385,800 385,800 385,800 400,100 400,100 400,100 400,100 400,100 428,700 428,700 428,700 428,700 428,700

Wall Thickness in. 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.217 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362

Nominal ID in. 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.441 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151 2.151

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

1.812 1.812 1.812 1.812 1.812 1.812 1.812 1.812 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858 2.858

1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.121 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602 1.602

Pipe Body Polar Section Modulus cu in. 2.241 2.241 2.241 2.241 2.241 2.241 2.241 2.241 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204 3.204

Internal Pressure psi 18,492 18,492 18,492 18,492 19,813 19,813 19,813 19,813 16,526 16,526 16,526 16,526 16,526 16,526 16,526 20,933 20,933 20,933 20,933 20,933 20,933 20,933 23,137 23,137 23,137 23,137 23,137 23,137 23,137 29,747 29,747 29,747 29,747 29,747 29,747 29,747 29,747 30,849 30,849 30,849 30,849 30,849 33,052 33,052 33,052 33,052 33,052

Collapse Pressure psi 17,500 17,500 17,500 17,500 18,398 18,398 18,398 18,398 16,509 16,509 16,509 16,509 16,509 16,509 16,509 20,911 20,911 20,911 20,911 20,911 20,911 20,911 23,112 23,112 23,112 23,112 23,112 23,112 23,112 29,716 29,716 29,716 29,716 29,716 29,716 29,716 29,716 30,817 30,817 30,817 30,817 30,817 33,018 33,018 33,018 33,018 33,018

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

46

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 3 11/32 3 1/4 3 3/4 3 21/32 3 3/8 3 9/32 3 25/32 3 11/16 3 13/16 3 13/32 3 19/32 3 3/16 3 19/32 2 31/32 3 3/8 3 29/32 N/A 3 11/16 3 5/16 3 23/32 3 3/32 3 1/2 3 15/16 N/A 3 23/32 3 3/8 3 3/4 3 5/32 3 17/32 4 1/16 N/A 3 27/32 3 9/16 3 27/32 3 5/16 3 11/16 3 15/16 3 17/32 3 7/8 3 5/16 3 21/32 3 15/16 3 9/16 3 29/32 3 3/8 3 23/32 4

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb HT26 XT26 HT31 XT31 HT26 XT26 HT31 XT31 NC31 NC26 SLH90 HT26 HT31 XT26 XT31 NC31 NC26 SLH90 HT26 HT31 XT26 XT31 NC31 NC26 SLH90 HT26 HT31 XT26 XT31 NC31 NC26 SLH90 HT26 HT31 XT26 XT31 GPDS31 HT26 HT31 XT26 XT31 GPDS31 HT26 HT31 XT26 XT31 GPDS31

3 1/2 3 3/8 4 4 3 1/2 3 3/8 4 4 4 1/8 3 1/2 3 7/8 3 1/2 4 1/8 3 1/2 3 7/8 4 1/8 3 1/2 3 7/8 3 1/2 4 1/8 3 1/2 3 7/8 4 1/8 3 1/2 3 7/8 3 5/8 4 1/8 3 1/2 3 7/8 4 1/8 3 5/8 3 7/8 3 5/8 4 1/8 3 1/2 3 7/8 4 1/8 3 5/8 4 1/8 3 1/2 4 4 1/8 3 5/8 4 1/8 3 1/2 4 4 1/8

1 1/2 1 3/4 2 5/32 2 3/8 1 1/2 1 3/4 2 5/32 2 3/8 2 1/8 1 1/2 2 1 1/2 2 1/8 1 1/2 2 1/8 2 1 1/2 2 1 1/2 2 1/8 1 1/2 2 1/8 2 1 1/2 2 1 1/2 2 1/8 1 1/2 2 1/8 2 1 1/2 2 1 1/2 2 1 3/8 2 1/8 2 1 1/4 2 1 1/4 2 2 1 1/4 2 1 1/4 2 2

12,100 11,500 14,900 13,200 12,100 11,500 14,900 13,200 11,500 8,800 13,100 12,100 16,600 14,800 16,600 13,200 8,800 13,100 12,100 16,600 14,800 16,600 13,200 8,800 13,100 13,100 16,600 14,800 16,600 13,200 9,000 13,300 13,100 18,900 15,900 16,600 17,200 15,300 18,900 16,400 20,400 17,200 15,300 18,900 16,400 20,400 17,200

390,300 290,900 434,500 309,100 390,300 290,900 434,500 309,100 447,100 390,300 444,000 390,300 447,100 367,400 415,100 495,700 390,300 444,000 390,300 447,100 367,400 415,100 495,700 390,300 444,000 390,300 447,100 367,400 415,100 495,700 390,300 444,000 390,300 495,700 401,300 415,000 495,700 455,100 495,700 432,200 463,700 495,700 455,100 495,700 432,200 463,700 495,700

7,300 6,900 8,900 7,900 7,300 6,900 8,900 7,900 6,400 4,900 6,900 7,300 10,000 8,900 10,000 7,100 4,900 6,900 7,300 10,000 8,900 10,000 7,100 4,900 6,900 7,900 10,000 8,900 10,000 7,100 4,900 6,900 7,900 11,300 9,500 10,000 10,300 9,200 11,300 9,800 12,200 10,300 9,200 11,300 9,800 12,200 10,300

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

0.80 0.76 0.99 0.87 0.75 0.71 0.92 0.81 1.03 0.76 1.13 1.04 1.43 1.28 1.43 0.90 0.60 0.90 0.83 1.14 1.01 1.14 0.81 0.54 0.81 0.81 1.02 0.91 1.02 0.63 0.43 0.63 0.63 0.91 0.76 0.80 0.83 0.71 0.88 0.76 0.94 0.80 0.66 0.82 0.71 0.88 0.74

9 10 9 10 9 10 9 10 9 9 9 9 9 10 10 9 9 9 9 9 10 10 9 9 9 9 9 10 10 9 9 9 9 9 10 10 9 9 9 10 10 9 9 9 10 10 9

12 15 13 15 12 15 13 15 11 10 11 12 13 15 15 11 10 11 12 13 15 15 11 10 11 12 13 15 15 11 10 11 12 13 15 15 11 12 13 15 15 11 12 13 15 15 11

7.60 7.43 7.83 7.75 7.60 7.43 7.83 7.75 11.14 10.79 10.95 10.85 11.26 11.02 11.06 11.27 10.76 10.95 10.85 11.26 11.02 11.06 11.27 10.76 10.95 10.99 11.26 11.02 11.06 11.29 10.90 10.95 10.99 11.39 11.11 11.06 11.27 11.15 11.39 11.19 11.38 11.27 11.15 11.39 11.19 11.38 11.27

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 1 3/8 1 5/8 2 1/32 2 1/4 1 3/8 1 5/8 2 1/32 2 1/4 2 1 3/8 1 7/8 1 3/8 2 1 3/8 2 1 7/8 1 3/8 1 7/8 1 3/8 2 1 3/8 2 1 7/8 1 3/8 1 7/8 1 3/8 2 1 3/8 2 1 7/8 1 3/8 1 7/8 1 3/8 1 7/8 1 1/4 2 1 7/8 1 1/8 1 7/8 1 1/8 1 7/8 1 7/8 1 1/8 1 7/8 1 1/8 1 7/8 1 7/8

0.233 0.234 0.239 0.242 0.233 0.234 0.239 0.242 0.188 0.183 0.187 0.182 0.188 0.181 0.188 0.187 0.183 0.187 0.182 0.188 0.181 0.188 0.187 0.183 0.187 0.182 0.188 0.181 0.188 0.187 0.183 0.187 0.182 0.187 0.180 0.188 0.187 0.180 0.187 0.179 0.187 0.187 0.180 0.187 0.179 0.187 0.187

0.116 0.114 0.120 0.118 0.116 0.114 0.120 0.118 0.170 0.165 0.168 0.166 0.172 0.168 0.169 0.172 0.165 0.168 0.166 0.172 0.168 0.169 0.173 0.165 0.168 0.168 0.172 0.168 0.169 0.173 0.167 0.168 0.168 0.174 0.170 0.169 0.172 0.171 0.174 0.171 0.174 0.172 0.171 0.174 0.171 0.174 0.172

2 7/8

2 7/8

2 7/8

2 7/8

2 7/8

2 7/8

2 7/8

2 7/8

*2” Longer than standard.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

47

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in. 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2

Nominal Weight lb/ft 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 9.50 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30

Grade and Upset Type E-75 EU E-75 IU E-75 IU E-75 EU E-75 EU E-75 IU E-75 EU X-95 EU X-95 IU X-95 IU X-95 EU X-95 EU X-95 IU X-95 EU G-105 EU G-105 IU G-105 IU G-105 EU G-105 EU G-105 IU G-105 EU S-135 EU S-135 IU S-135 IU S-135 EU S-135 EU S-135 IU S-135 EU Z-140 IU Z-140 EU Z-140 IU Z-140 EU V-150 IU V-150 EU V-150 IU V-150 EU E-75 EU E-75 IU E-75 IU E-75 EU E-75 EU E-75 IU E-75 EU X-95 EU X-95 IU X-95 IU X-95 EU X-95 EU X-95 IU X-95 EU

Torsional Yield Strength ft-lb 14,100 14,100 14,100 14,100 14,100 14,100 14,100 17,900 17,900 17,900 17,900 17,900 17,900 17,900 19,800 19,800 19,800 19,800 19,800 19,800 19,800 25,500 25,500 25,500 25,500 25,500 25,500 25,500 26,400 26,400 26,400 26,400 28,300 28,300 28,300 28,300 18,600 18,600 18,600 18,600 18,600 18,600 18,600 23,500 23,500 23,500 23,500 23,500 23,500 23,500

Tensile Yield Strength lb 194,300 194,300 194,300 194,300 194,300 194,300 194,300 246,100 246,100 246,100 246,100 246,100 246,100 246,100 272,000 272,000 272,000 272,000 272,000 272,000 272,000 349,700 349,700 349,700 349,700 349,700 349,700 349,700 362,600 362,600 362,600 362,600 388,500 388,500 388,500 388,500 271,600 271,600 271,600 271,600 271,600 271,600 271,600 344,000 344,000 344,000 344,000 344,000 344,000 344,000

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

Pipe Body Polar Section Modulus cu in.

0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.254 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368

2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.992 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764

2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 2.590 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621

1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 1.961 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572

3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 3.923 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144

Internal Pressure psi 9,525 9,525 9,525 9,525 9,525 9,525 9,525 12,065 12,065 12,065 12,065 12,065 12,065 12,065 13,335 13,335 13,335 13,335 13,335 13,335 13,335 17,145 17,145 17,145 17,145 17,145 17,145 17,145 17,780 17,780 17,780 17,780 19,050 19,050 19,050 19,050 13,800 13,800 13,800 13,800 13,800 13,800 13,800 17,480 17,480 17,480 17,480 17,480 17,480 17,480

Collapse Pressure psi 10,001 10,001 10,001 10,001 10,001 10,001 10,001 12,077 12,077 12,077 12,077 12,077 12,077 12,077 13,055 13,055 13,055 13,055 13,055 13,055 13,055 15,748 15,748 15,748 15,748 15,748 15,748 15,748 16,158 16,158 16,158 16,158 16,943 16,943 16,943 16,943 14,113 14,113 14,113 14,113 14,113 14,113 14,113 17,877 17,877 17,877 17,877 17,877 17,877 17,877

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

48

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 4 13/32 3 7/8 3 11/16 4 5/32 4 3/16 3 1/2 4 4 15/32 4 3 13/16 4 1/4 4 9/32 3 5/8 4 3/32 4 17/32 4 1/16 3 27/32 4 9/32 4 5/16 3 11/16 4 5/32 4 21/32 N/A 4 4 7/16 4 7/16 3 13/16 4 9/32 4 1/32 4 15/32 3 27/32 4 5/16 4 4 1/2 3 29/32 4 11/32 4 1/2 4 1/32 3 27/32 4 1/4 4 9/32 3 5/8 4 1/32 4 19/32 N/A 3 15/16 4 3/8 4 3/8 3 25/32 4 5/32

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb NC38 NC31 HT31 HT38 SLH90 XT31 XT38 NC38 NC31 HT31 HT38 SLH90 XT31 XT38 NC38 NC31 HT31 HT38 SLH90 XT31 XT38 NC38 NC31 HT31 HT38 SLH90 XT31 XT38 HT31 HT38 XT31 XT38 HT31 HT38 XT31 XT38 NC38 NC31 HT31 HT38 SLH90 XT31 XT38 NC38 NC31 HT31 HT38 SLH90 XT31 XT38

4 3/4 4 1/8 4 1/8 4 3/4 4 3/4 4 4 3/4 4 3/4 4 1/8 4 1/8 4 3/4 4 3/4 4 4 3/4 4 3/4 4 1/8 4 1/8 4 3/4 4 3/4 4 4 3/4 4 7/8 4 1/8 4 1/8 4 3/4 4 3/4 4 4 3/4 4 1/8 4 3/4 4 4 3/4 4 1/4 4 3/4 4 4 3/4 4 3/4 4 1/8 4 1/8 4 3/4 4 3/4 4 4 3/4 5 4 1/8 4 1/8 4 3/4 4 3/4 4 4 3/4

2 11/16 2 1/8 2 1/8 2 11/16 2 11/16 2 1/8 2 13/16 2 11/16 2 2 1/8 2 11/16 2 11/16 2 1/8 2 13/16 2 11/16 2 2 2 11/16 2 11/16 2 1/8 2 13/16 2 9/16 2 2 2 11/16 2 9/16 2 2 13/16 2 2 11/16 2 2 13/16 1 3/4 2 11/16 2 2 13/16 2 11/16 2 2 1/8 2 11/16 2 11/16 2 1/8 2 11/16 2 9/16 2 2 2 11/16 2 11/16 2 1/8 2 11/16

18,100 11,900 16,600 25,300 18,688 18,600 23,900 18,100 13,200 16,600 25,300 18,700 18,600 23,900 18,100 13,200 18,900 25,300 18,700 18,600 23,900 20,200 13,200 18,900 25,300 20,900 20,400 23,900 18,900 25,300 20,400 23,900 23,400 25,300 20,400 23,900 18,100 13,200 16,600 25,300 18,700 18,600 27,700 20,300 13,200 18,900 25,300 18,700 18,600 27,700

587,300 447,100 447,100 587,300 534,200 415,100 473,000 587,300 495,700 447,100 587,300 534,200 415,100 473,000 587,300 495,700 495,700 587,300 534,200 415,100 473,000 649,200 495,700 495,700 587,300 596,100 463,700 473,000 495,700 587,300 463,700 473,000 584,100 587,300 463,700 473,000 587,300 495,700 447,100 587,300 534,200 415,100 537,800 649,200 495,700 495,700 587,300 534,200 415,100 537,800

9,700 6,400 10,000 15,200 11,100 11,200 14,300 9,700 7,100 10,000 15,200 11,100 11,200 14,300 9,700 7,100 11,300 15,200 11,100 11,200 14,300 10,700 7,100 11,300 15,200 12,400 12,200 14,300 11,300 15,200 12,200 14,300 14,000 15,200 12,200 14,300 9,700 7,100 10,000 15,200 11,100 11,200 16,600 10,700 7,100 11,300 15,200 11,100 11,200 16,600

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

1.28 0.84 1.18 1.79 1.33 1.32 1.70 1.01 0.74 0.93 1.41 1.04 1.04 1.34 0.91 0.67 0.95 1.28 0.94 0.94 1.21 0.79 0.52 0.74 0.99 0.82 0.80 0.94 0.72 0.96 0.76 0.91 0.83 0.89 0.72 0.84 0.97 0.71 0.89 1.36 1.01 1.00 1.49 0.86 0.56 0.80 1.08 0.80 0.79 1.18

10 9 9 10 10 10 10 10 9 9 10 10 10 10 10 9 9 10 10 10 10 10 9 9 10 10 10 10 9 10 10 10 9 10 10 10 10 9 9 10 10 10 10 10 9 9 10 10 10 10

12.5 11 13 15.5 12.5 15 15 12.5 11 13 15.5 12.5 15 15 12.5 11 13 15.5 12.5 15 15 12.5 11 13 15.5 12.5 15 15 13 15.5 15 15 13 15.5 15 15 12.5 11 13 15.5 12.5 15 15 12.5 11 13 15.5 12.5 15 15

11.07 10.49 10.62 11.31 11.07 10.61 11.08 11.07 10.61 10.62 11.31 11.07 10.61 11.08 11.07 10.61 10.74 11.31 11.07 10.61 11.08 11.45 10.61 10.74 11.31 11.24 10.74 11.08 10.74 11.31 10.74 11.08 11.14 11.31 10.74 11.08 14.24 13.93 13.91 14.45 14.24 13.87 14.42 14.84 13.93 14.04 14.45 14.24 13.87 14.42

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 2 9/16 2 2 2 9/16 2 9/16 2 2 11/16 2 9/16 1 7/8 2 2 9/16 2 9/16 2 2 11/16 2 9/16 1 7/8 1 7/8 2 9/16 2 9/16 2 2 11/16 2 7/16 1 7/8 1 7/8 2 9/16 2 7/16 1 7/8 2 11/16 1 7/8 2 9/16 1 7/8 2 11/16 1 5/8 2 9/16 1 7/8 2 11/16 2 9/16 1 7/8 2 2 9/16 2 9/16 2 2 9/16 2 7/16 1 7/8 1 7/8 2 9/16 2 9/16 2 2 9/16

0.360 0.354 0.353 0.360 0.360 0.352 0.362 0.360 0.352 0.353 0.360 0.360 0.352 0.362 0.360 0.352 0.351 0.360 0.360 0.352 0.362 0.358 0.352 0.351 0.360 0.358 0.350 0.362 0.351 0.360 0.350 0.362 0.348 0.360 0.350 0.362 0.310 0.302 0.303 0.310 0.310 0.302 0.310 0.308 0.302 0.301 0.310 0.310 0.302 0.310

0.169 0.161 0.162 0.173 0.169 0.162 0.170 0.169 0.162 0.162 0.173 0.169 0.162 0.170 0.169 0.162 0.164 0.173 0.169 0.162 0.170 0.175 0.162 0.164 0.173 0.172 0.164 0.170 0.164 0.173 0.164 0.170 0.170 0.173 0.164 0.170 0.218 0.213 0.213 0.221 0.218 0.212 0.221 0.227 0.213 0.215 0.221 0.218 0.212 0.221

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

3 1/2

*2” Longer than standard. While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

49

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in. 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2

Nominal Weight lb/ft 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 15.50 16.60

Grade and Upset Type G-105 EU G-105 IU G-105 IU G-105 EU G-105 EU G-105 IU G-105 EU S-135 EU S-135 IU S-135 IU S-135 EU S-135 EU S-135 IU S-135 EU S-135 EU Z-140 IU Z-140 EU Z-140 IU Z-140 EU Z-140 EU V-150 IU V-150 EU V-150 IU V-150 EU V-150 EU E-75 EU E-75 EU E-75 EU X-95 EU X-95 EU X-95 EU G-105 EU G-105 EU G-105 EU G-105 EU S-135 EU S-135 EU S-135 EU S-135 EU S-135 EU S-135 EU Z-140 EU Z-140 EU Z-140 EU Z-140 EU V-150 EU V-150 EU V-150 EU V-150 EU S-135 EU

Torsional Yield Strength ft-lb 26,000 26,000 26,000 26,000 26,000 26,000 26,000 33,400 33,400 33,400 33,400 33,400 33,400 33,400 33,400 34,600 34,600 34,600 34,600 34,600 37,100 37,100 37,100 37,100 37,100 21,100 21,100 21,100 26,700 26,700 26,700 29,500 29,500 29,500 29,500 38,000 38,000 38,000 38,000 38,000 38,000 39,400 39,400 39,400 39,400 42,200 42,200 42,200 42,200 55,500

Tensile Yield Strength lb 380,200 380,200 380,200 380,200 380,200 380,200 380,200 488,800 488,800 488,800 488,800 488,800 488,800 488,800 488,800 506,900 506,900 506,900 506,900 506,900 543,100 543,100 543,100 543,100 543,100 322,800 322,800 322,800 408,800 408,800 408,800 451,900 451,900 451,900 451,900 581,000 581,000 581,000 581,000 581,000 581,000 602,500 602,500 602,500 602,500 645,500 645,500 645,500 645,500 595,000

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

Pipe Body Polar Section Modulus cu in.

0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.368 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.449 0.337

2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.764 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 2.602 3.826

3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 3.621 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.304 4.407

2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.572 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 2.923 4.271

5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.144 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 5.847 8.543

Internal Pressure psi 19,320 19,320 19,320 19,320 19,320 19,320 19,320 24,840 24,840 24,840 24,840 24,840 24,840 24,840 24,840 25,760 25,760 25,760 25,760 25,760 27,600 27,600 27,600 27,600 27,600 16,838 16,838 16,838 21,328 21,328 21,328 23,573 23,573 23,573 23,573 30,308 30,308 30,308 30,308 30,308 30,308 31,430 31,430 31,430 31,430 33,675 33,675 33,675 33,675 17,693

Collapse Pressure psi 19,758 19,758 19,758 19,758 19,758 19,758 19,758 25,404 25,404 25,404 25,404 25,404 25,404 25,404 25,404 26,345 26,345 26,345 26,345 26,345 28,226 28,226 28,226 28,226 28,226 16,774 16,774 16,774 21,247 21,247 21,247 23,484 23,484 23,484 23,484 30,194 30,194 30,194 30,194 30,194 30,194 31,312 31,312 31,312 31,312 33,549 33,549 33,549 33,549 16,773

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

50

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 4 21/32 N/A 4 4 7/16 4 7/16 3 13/16 4 7/32 4 13/16 N/A N/A 4 9/16 4 19/32 4 31/32 4 13/32 4 11/16 N/A 4 9/16 3 31/32 4 3/8 4 11/16 4 1/4 4 5/8 4 1/16 4 7/16 4 3/4 4 17/32 4 1/4 4 1/32 4 21/32 4 3/8 4 5/32 4 23/32 4 7/16 4 15/16 4 1/4 4 29/32 4 19/32 5 3/32 4 3/8 4 3/8 4 23/32 4 5/8 4 13/32 4 13/32 4 3/4 4 19/32 4 13/32 4 3/8 4 23/32

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb NC38 NC31 HT31 HT38 SLH90 XT31 XT38 NC38 NC31 HT31 HT38 SLH90 XT31 XT38 GPDS38 HT31 HT38 XT31 XT38 GPDS38 HT31 HT38 XT31 XT38 GPDS38 NC38 HT38 XT38 NC38 HT38 XT38 NC38 HT38 NC40 XT38 NC38 HT38 NC40 XT38 XT39 GPDS38 HT38 XT38 XT39 GPDS38 HT38 XT38 XT39 GPDS38

5 2 7/16 4 1/8 2 4 1/8 2 4 3/4 2 11/16 4 3/4 2 9/16 4 1/8 2 4 3/4 2 11/16 5 2 1/8 4 1/8 2 4 1/8 2 4 3/4 2 9/16 4 3/4 2 9/16 4 1/8 1 7/8 4 3/4 2 11/16 4 7/8 2 9/16 4 1/8 1 7/8 4 3/4 2 9/16 4 1/8 1 3/4 4 3/4 2 9/16 5 2 9/16 4 1/4 1 3/4 4 3/4 2 9/16 4 1/8 1 3/4 4 3/4 2 9/16 5 2 9/16 5 2 9/16 4 3/4 2 9/16 4 3/4 2 9/16 5 2 7/16 4 3/4 2 9/16 4 3/4 2 9/16 5 2 1/8 4 3/4 2 9/16 5 1/4 2 9/16 4 3/4 2 9/16 5 2 1/8 4 3/4 2 7/16 5 1/2 2 1/4 4 3/4 2 7/16 4 7/8 2 7/16 5 2 7/16 4 3/4 2 7/16 4 3/4 2 7/16 4 7/8 2 7/16 5 2 7/16 5 2 1/4 4 3/4 2 1/4 4 7/8 2 1/4 5 2 1/4

22,200 13,200 18,900 25,300 20,900 21,100 27,700 26,500 13,200 18,900 26,900 20,900 23,400 27,700 25,700 19,900 26,900 25,000 31,300 25,800 23,400 26,900 25,000 31,300 25,800 20,300 26,900 31,300 22,200 26,900 31,300 26,500 26,900 27,800 31,300 26,500 28,400 32,900 34,200 38,500 29,200 28,400 34,200 38,500 29,200 37,700 36,300 40,700 33,900

708,100 495,700 495,700 587,300 596,100 463,700 537,800 842,400 495,700 495,700 649,200 596,100 509,400 537,800 649,200 541,400 649,200 552,100 599,600 649,200 584,100 649,200 552,100 599,600 649,200 649,200 649,200 599,600 708,100 649,200 599,600 842,400 649,200 838,300 599,600 842,400 708,100 980,000 658,500 788,600 708,100 708,100 658,500 788,600 708,100 790,900 741,400 871,400 790,900

11,700 7,100 11,300 15,200 12,400 12,700 16,600 14,000 7,100 11,300 16,100 12,400 14,000 16,600 15,400 11,900 16,100 15,000 18,800 15,500 14,000 16,100 15,000 18,800 15,500 10,700 16,100 18,800 11,700 16,100 18,800 14,000 16,100 14,600 18,800 14,000 17,000 17,100 20,500 22,100 17,500 17,000 20,500 23,100 17,500 22,600 21,800 24,400 20,300

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

0.85 0.51 0.73 0.97 0.80 0.81 1.07 0.79 0.40 0.57 0.81 0.63 0.70 0.83 0.77 0.58 0.78 0.72 0.90 0.75 0.63 0.73 0.67 0.84 0.70 0.96 1.27 1.48 0.83 1.01 1.17 0.90 0.91 0.94 1.06 0.70 0.75 0.87 0.90 1.01 0.77 0.72 0.87 0.98 0.74 0.89 0.86 0.96 0.80

10 9 9 10 10 10 10 10 9 9 10 10 10 10 10 9 10 10 10 10 9 10 10 10 10 10 10 10 10 10 10 10 10 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

12.5 11 13 15.5 12.5 15 15 12.5 11 13 15.5 12.5 15 15 12.5 13 15.5 15 15 12.5 13 15.5 15 15 12.5 12.5 15.5 15 12.5 15.5 15 12.5 15.5 12 15 12.5 15.5 12.5 15 15 12.5 15.5 15 15 12.5 15.5 15 15 12.5

15.00 13.93 14.04 14.45 14.41 14.21 14.42 15.37 13.93 14.04 14.63 14.41 14.34 14.42 14.62 14.17 14.63 14.47 14.59 14.84 14.47 14.63 14.47 14.59 14.84 16.94 16.71 16.68 17.11 16.71 16.68 17.50 16.71 17.24 16.68 17.50 16.90 18.31 16.86 17.09 17.11 16.90 16.86 17.09 17.11 17.63 17.11 17.35 17.35

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 2 5/16 1 7/8 1 7/8 2 9/16 2 7/16 1 7/8 2 9/16 2 1 7/8 1 7/8 2 7/16 2 7/16 1 3/4 2 9/16 2 7/16 1 3/4 2 7/16 1 5/8 2 7/16 2 7/16 1 5/8 2 7/16 1 5/8 2 7/16 2 7/16 2 7/16 2 7/16 2 7/16 2 5/16 2 7/16 2 7/16 2 2 7/16 2 7/16 2 7/16 2 2 5/16 2 1/8 2 5/16 2 5/16 2 5/16 2 5/16 2 5/16 2 5/16 2 5/16 2 1/8 2 1/8 2 1/8 2 1/8

0.306 0.302 0.301 0.310 0.308 0.300 0.310 0.302 0.302 0.301 0.308 0.308 0.298 0.310 0.308 0.300 0.308 0.297 0.308 0.308 0.298 0.308 0.297 0.308 0.308 0.276 0.276 0.276 0.274 0.276 0.276 0.269 0.276 0.276 0.276 0.269 0.273 0.271 0.273 0.273 0.274 0.273 0.273 0.273 0.274 0.270 0.271 0.270 0.271

0.229 0.213 0.215 0.221 0.220 0.217 0.221 0.235 0.213 0.215 0.224 0.220 0.219 0.221 0.224 0.217 0.224 0.221 0.223 0.227 0.221 0.224 0.221 0.223 0.227 0.259 0.256 0.255 0.262 0.256 0.255 0.268 0.256 0.264 0.255 0.268 0.258 0.280 0.258 0.261 0.262 0.258 0.258 0.261 0.262 0.270 0.262 0.265 0.265

3 1/2

3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2

*2” Longer than standard.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

51

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in. 4 4 4 4 4 4 4 4 4

Nominal Weight lb/ft 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 11.85 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00

Grade and Upset Type E-75 IU E-75 IU E-75 IU E-75 IU E-75 IU X-95 IU X-95 IU X-95 IU X-95 IU X-95 IU G-105 IU G-105 IU G-105 IU G-105 IU G-105 IU S-135 IU S-135 IU S-135 IU S-135 IU S-135 IU Z-140 IU Z-140 IU Z-140 IU V-150 IU V-150 IU V-150 IU E-75 IU E-75 IU E-75 IU E-75 IU E-75 EU E-75 IU E-75 IU X-95 IU X-95 IU X-95 IU X-95 IU X-95 EU X-95 IU X-95 IU G-105 IU G-105 IU G-105 IU G-105 IU G-105 EU G-105 IU G-105 IU

Torsional Yield Strength ft-lb 19,500 19,500 19,500 19,500 19,500 24,700 24,700 24,700 24,700 24,700 27,300 27,300 27,300 27,300 27,300 35,100 35,100 35,100 35,100 35,100 36,400 36,400 36,400 38,900 38,900 38,900 23,300 23,300 23,300 23,300 23,300 23,300 23,300 29,500 29,500 29,500 29,500 29,500 29,500 29,500 32,600 32,600 32,600 32,600 32,600 32,600 32,600

Tensile Yield Strength lb 230,800 230,800 230,800 230,800 230,800 292,300 292,300 292,300 292,300 292,300 323,100 323,100 323,100 323,100 323,100 415,400 415,400 415,400 415,400 415,400 430,700 430,700 430,700 461,500 461,500 461,500 285,400 285,400 285,400 285,400 285,400 285,400 285,400 361,500 361,500 361,500 361,500 361,500 361,500 361,500 399,500 399,500 399,500 399,500 399,500 399,500 399,500

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

Pipe Body Polar Section Modulus cu in.

0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.262 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330

3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.476 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340

3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.077 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805

2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 2.700 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229

5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458

Internal Pressure psi 8,597 8,597 8,597 8,597 8,597 10,889 10,889 10,889 10,889 10,889 12,036 12,036 12,036 12,036 12,036 15,474 15,474 15,474 15,474 15,474 16,048 16,048 16,048 17,194 17,194 17,194 10,828 10,828 10,828 10,828 10,828 10,828 10,828 13,716 13,716 13,716 13,716 13,716 13,716 13,716 15,159 15,159 15,159 15,159 15,159 15,159 15,159

Collapse Pressure psi 8,381 8,381 8,381 8,381 8,381 9,978 9,978 9,978 9,978 9,978 10,708 10,708 10,708 10,708 10,708 12,618 12,618 12,618 12,618 12,618 12,894 12,894 12,894 13,404 13,404 13,404 11,354 11,354 11,354 11,354 11,354 11,354 11,354 14,382 14,382 14,382 14,382 14,382 14,382 14,382 15,896 15,896 15,896 15,896 15,896 15,896 15,896

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

52

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 4 3/4 4 3/8 4 9/32 4 1/16 4 5/32 4 27/32 4 1/2 4 13/32 4 3/16 4 5/32 4 29/32 4 9/16 4 13/32 4 9/32 4 11/32 5 1/16 4 23/32 4 17/32 4 7/16 4 1/2 4 9/16 4 15/32 4 17/32 4 5/8 4 15/32 4 19/32 4 13/16 4 3/8 4 7/16 4 19/32 5 9/32 4 5/32 4 5/32 4 15/16 4 17/32 4 19/32 4 23/32 5 3/8 4 5/16 4 3/8 5 4 17/32 4 21/32 4 25/32 5 7/16 4 3/8 4 7/16

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb NC40 SH HT38 XT38 XT39 NC40 SH HT38 XT38 XT39 NC40 SH HT38 XT38 XT39 NC40 SH HT38 XT38 XT39 HT38 XT38 XT39 HT38 XT38 XT39 NC40 HT38 SH HT40 NC46 XT38 XT39 NC40 HT38 SH HT40 NC46 XT38 XT39 NC40 HT38 SH HT40 NC46 XT38 XT39

5 1/4 4 3/4 4 3/4 4 3/4 4 7/8 5 1/4 4 3/4 4 3/4 4 3/4 4 7/8 5 1/4 4 3/4 4 3/4 4 3/4 4 7/8 5 1/2 4 3/4 4 3/4 4 3/4 4 7/8 4 3/4 4 3/4 4 7/8 5 4 3/4 4 7/8 5 1/4 4 3/4 4 3/4 5 1/4 6 4 3/4 4 7/8 5 1/4 4 3/4 4 3/4 5 1/4 6 4 3/4 4 7/8 5 1/2 5 4 3/4 5 1/4 6 4 3/4 4 7/8

2 13/16 2 9/16 2 11/16 2 11/16 2 13/16 2 13/16 2 9/16 2 11/16 2 11/16 2 13/16 2 13/16 2 9/16 2 9/16 2 11/16 2 13/16 2 9/16 2 9/16 2 7/16 2 11/16 2 13/16 2 7/16 2 11/16 2 13/16 2 7/16 2 9/16 2 13/16 2 13/16 2 11/16 2 7/16 2 13/16 3 1/4 2 11/16 2 13/16 2 11/16 2 11/16 2 7/16 2 13/16 3 1/4 2 11/16 2 13/16 2 7/16 2 9/16 2 7/16 2 13/16 3 1/4 2 11/16 2 13/16

23,500 15,300 25,300 27,900 32,900 23,500 15,300 25,300 27,700 32,900 23,500 15,300 26,900 27,900 32,900 28,100 15,300 28,400 27,700 32,900 28,400 27,700 32,900 33,000 31,300 32,900 23,500 25,300 17,100 31,900 33,600 27,700 32,900 25,700 25,300 17,100 31,900 33,600 27,700 32,900 30,100 29,600 17,100 31,900 33,600 27,700 32,900

711,600 512,000 587,300 537,800 603,000 711,600 512,000 587,300 537,800 603,000 711,600 512,000 649,200 537,800 603,000 838,300 512,000 708,100 537,800 603,000 708,100 537,800 603,000 708,100 599,600 603,000 711,600 587,300 570,900 711,600 901,200 537,800 603,000 776,400 587,300 570,900 711,600 901,200 537,800 603,000 897,200 649,200 570,900 711,600 901,200 537,800 603,000

12,400 8,100 15,200 16,600 19,700 12,400 8,100 15,200 16,600 19,700 12,400 8,100 16,100 16,600 19,700 14,600 8,100 17,000 16,600 19,700 17,000 16,600 19,700 19,800 18,800 19,700 12,400 15,200 9,100 19,100 17,600 16,600 19,700 13,500 15,200 9,100 19,100 17,600 16,600 19,700 15,600 17,800 9,100 19,100 17,600 16,600 19,700

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

1.21 0.78 1.30 1.42 1.69 0.95 0.62 1.02 1.12 1.69 0.86 0.56 0.99 1.01 1.21 0.80 0.44 0.81 0.79 0.94 0.78 0.76 0.90 0.85 0.81 0.85 1.01 1.09 0.73 1.37 1.44 1.19 1.41 0.87 0.86 0.58 1.08 1.14 0.95 1.12 0.92 0.91 0.52 0.98 1.03 0.85 1.01

9 9 10 10 10 9 9 10 10 10 9 9 10 10 10 9 9 10 10 10 10 10 10 10 10 10 9 10 9 9 9 10 10 9 10 9 9 9 10 10 9 10 9 9 9 10 10

12 12 15.5 15 15 12 12 15.5 15 15 12 12 15.5 15 15 12 12 15.5 15 15 15.5 15 15 15.5 15 15 12 15.5 12 15 12 15 15 12 15.5 12 15 12 15 15 12 15.5 12 15 12 15 15

13.41 12.91 13.08 13.04 13.08 13.41 12.91 13.08 13.04 13.08 13.41 12.91 13.27 13.04 13.08 14.23 12.91 13.45 13.04 13.08 13.45 13.04 13.08 13.93 13.23 13.08 15.64 15.28 15.31 15.93 16.51 15.25 13.08 15.82 15.28 15.31 15.93 16.51 15.25 15.29 16.62 15.95 15.31 15.93 16.51 15.25 15.29

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 2 11/16 2 7/16 2 9/16 2 9/16 2 11/16 2 11/16 2 7/16 2 9/16 2 9/16 2 11/16 2 11/16 2 7/16 2 7/16 2 9/16 2 11/16 2 7/16 2 7/16 2 5/16 2 9/16 2 11/16 2 5/16 2 9/16 2 11/16 2 5/16 2 7/16 2 11/16 2 11/16 2 9/16 2 5/16 2 11/16 3 1/8 2 9/16 2 11/16 2 9/16 2 9/16 2 5/16 2 11/16 3 1/8 2 9/16 2 11/16 2 5/16 2 7/16 2 5/16 2 11/16 3 1/8 2 9/16 2 11/16

0.481 0.477 0.477 0.477 0.479 0.481 0.477 0.477 0.477 0.479 0.481 0.477 0.475 0.477 0.479 0.476 0.477 0.473 0.477 0.479 0.473 0.477 0.479 0.472 0.475 0.479 0.445 0.442 0.440 0.444 0.453 0.442 0.479 0.443 0.442 0.440 0.444 0.453 0.442 0.444 0.439 0.440 0.440 0.444 0.453 0.442 0.444

0.205 0.198 0.200 0.199 0.200 0.205 0.198 0.200 0.199 0.200 0.205 0.198 0.203 0.199 0.200 0.218 0.198 0.206 0.199 0.200 0.206 0.199 0.200 0.213 0.202 0.200 0.239 0.234 0.234 0.244 0.253 0.233 0.234 0.242 0.234 0.234 0.244 0.253 0.233 0.234 0.254 0.244 0.234 0.244 0.253 0.233 0.234

4 4 4 4 4 4 4 4 4

*2” Longer than standard.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

53

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in. 4 4 4 4 4 4 4 4 4

Nominal Weight lb/ft 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70 15.70

Grade and Upset Type S-135 IU S-135 IU S-135 IU S-135 IU S-135 EU S-135 IU S-135 IU S-135 IU Z-140 IU Z-140 IU Z-140 IU Z-140 IU Z-140 IU V-150 IU V-150 IU V-150 IU V-150 IU V-150 IU E-75 IU E-75 IU E-75 IU E-75 EU E-75 IU E-75 IU X-95 IU X-95 IU X-95 IU X-95 EU X-95 IU X-95 IU G-105 IU G-105 IU G-105 IU G-105 EU G-105 IU G-105 IU S-135 IU S-135 IU S-135 IU S-135 EU S-135 IU S-135 IU S-135 IU Z-140 IU Z-140 IU Z-140 IU Z-140 IU V-150 IU V-150 IU V-150 IU V-150 IU

Torsional Yield Strength ft-lb 41,900 41,900 41,900 41,900 41,900 41,900 41,900 41,900 43,500 43,500 43,500 43,500 43,500 46,600 46,600 46,600 46,600 46,600 25,800 25,800 25,800 25,800 25,800 25,800 32,700 32,700 32,700 32,700 32,700 32,700 36,100 36,100 36,100 36,100 36,100 36,100 46,500 46,500 46,500 46,500 46,500 46,500 46,500 48,200 48,200 48,200 48,200 51,600 51,600 51,600 51,600

Tensile Yield Strength lb 513,600 513,600 513,600 513,600 513,600 513,600 513,600 513,600 532,700 532,700 532,700 532,700 532,700 570,700 570,700 570,700 570,700 570,700 324,100 324,100 324,100 324,100 324,100 324,100 410,500 410,500 410,500 410,500 410,500 410,500 453,800 453,800 453,800 453,800 453,800 453,800 583,400 583,400 583,400 583,400 583,400 583,400 583,400 605,000 605,000 605,000 605,000 648,200 648,200 648,200 648,200

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

Pipe Body Polar Section Modulus cu in.

0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380 0.380

3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.340 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240 3.240

3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 3.805 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322 4.322

3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.229 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578 3.578

6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 6.458 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157 7.157

Internal Pressure psi 19,491 19,491 19,491 19,491 19,491 19,491 19,491 19,491 20,213 20,213 20,213 20,213 20,213 21,656 21,656 21,656 21,656 21,656 12,469 12,469 12,469 12,469 12,469 12,469 15,794 15,794 15,794 15,794 15,794 15,794 17,456 17,456 17,456 17,456 17,456 17,456 22,444 22,444 22,444 22,444 22,444 22,444 22,444 23,275 23,275 23,275 23,275 24,938 24,938 24,938 24,938

Collapse Pressure psi 20,141 20,141 20,141 20,141 20,141 20,141 20,141 20,141 20,742 20,742 20,742 20,742 20,742 21,912 21,912 21,912 21,912 21,912 12,896 12,896 12,896 12,896 12,896 12,896 16,335 16,335 16,335 16,335 16,335 16,335 18,055 18,055 18,055 18,055 18,055 18,055 23,213 23,213 23,213 23,213 23,213 23,213 23,213 24,073 24,073 24,073 24,073 25,793 25,793 25,793 25,793

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

54

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 5 3/16 4 11/16 N/A 4 29/32 5 9/16 4 17/32 4 17/32 5 4 23/32 4 15/16 4 9/16 4 9/16 5 4 25/32 5 4 19/32 4 5/8 5 1/32 4 7/8 4 5/8 4 31/32 5 5/16 4 5/32 4 5/16 5 4 25/32 5 3/32 5 7/16 4 5/16 4 15/32 5 1/16 4 27/32 5 5/32 5 15/32 4 13/32 4 17/32 5 1/4 4 15/16 5 5/16 5 21/32 4 5/8 4 3/4 5 1/32 4 31/32 4 21/32 4 25/32 5 1/16 5 4 25/32 4 25/32 5 3/32

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb NC40 HT38 SH HT40 NC46 XT38 XT39 GPDS40 HT38 HT40 XT38 XT39 GPDS40 HT38 HT40 XT38 XT39 GPDS40 NC40 HT40 H90 NC46 XT39 XT40 NC40 HT40 H90 NC46 XT39 XT40 NC40 HT40 H90 NC46 XT39 XT40 NC40 HT40 H90 NC46 XT39 XT40 GPDS40 HT40 XT39 XT40 GPDS40 HT40 XT39 XT40 GPDS40

5 1/2 5 4 3/4 5 1/4 6 4 3/4 4 7/8 5 1/4 5 5 1/4 4 3/4 4 7/8 5 1/4 5 5 1/4 4 3/4 4 7/8 5 1/4 5 1/4 5 1/4 5 1/2 6 4 7/8 5 1/4 5 1/4 5 1/4 5 1/2 6 4 7/8 5 1/4 5 1/2 5 1/4 5 1/2 6 4 7/8 5 1/4 5 1/2 5 1/2 5 3/4 6 4 7/8 5 1/4 5 1/4 5 1/4 4 7/8 5 1/4 5 1/4 5 1/4 4 7/8 5 1/4 5 1/4

2 2 7/16 2 7/16 2 11/16 3 2 9/16 2 9/16 2 11/16 2 7/16 2 11/16 2 9/16 2 9/16 2 9/16 2 7/16 2 11/16 2 7/16 2 9/16 2 9/16 2 13/16 2 13/16 2 13/16 3 2 9/16 2 13/16 2 9/16 2 13/16 2 13/16 3 2 9/16 2 13/16 2 7/16 2 13/16 2 13/16 3 2 9/16 2 13/16 2 2 9/16 2 11/16 3 2 9/16 2 13/16 2 9/16 2 9/16 2 9/16 2 13/16 2 9/16 2 7/16 2 9/16 2 11/16 2 7/16

36,400 33,000 17,100 35,900 39,200 31,300 37,000 32,700 33,000 35,900 31,300 37,000 34,600 33,000 35,900 34,200 37,000 36,400 23,500 31,900 35,400 39,200 37,000 44,000 27,800 31,900 35,400 39,200 37,000 44,000 30,100 31,900 35,400 39,200 37,000 44,000 36,400 39,500 38,400 39,200 37,000 44,000 36,400 39,500 37,000 44,000 36,400 41,000 37,000 48,100 38,100

1,080,100 708,100 570,900 776,400 1,048,400 599,600 729,700 776,400 708,100 776,400 599,600 729,700 838,300 708,100 776,400 658,500 729,700 838,300 711,600 711,600 913,700 1,048,400 729,700 751,600 838,300 711,600 913,700 1,048,400 729,700 751,600 897,200 711,600 913,700 1,048,400 729,700 751,600 1,080,100 838,300 978,500 1,048,400 729,700 751,600 838,300 838,300 729,700 751,600 868,300 897,200 729,700 816,400 897,200

18,900 19,800 9,100 21,500 20,500 18,800 22,200 19,600 19,800 21,500 18,800 22,200 21,800 19,800 21,500 20,500 22,200 21,800 12,400 19,100 20,400 20,500 22,200 26,400 14,600 19,100 20,400 20,500 22,200 26,400 15,600 19,100 20,400 20,500 22,200 26,400 18,900 23,700 21,800 20,500 22,200 26,400 21,800 23,700 22,200 26,400 21,800 24,600 22,200 28,900 22,900

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

0.87 0.79 0.41 0.86 0.94 0.75 0.88 0.78 0.76 0.83 0.72 0.85 0.84 0.71 0.77 0.73 0.79 0.78 0.91 1.24 1.37 1.52 1.43 1.71 0.85 0.98 1.08 1.20 1.13 1.35 0.83 0.88 0.98 1.09 1.02 1.22 0.78 0.85 0.83 0.84 0.80 0.95 0.78 0.82 0.77 0.91 0.76 0.79 0.72 0.93 0.74

9 10 9 9 9 10 10 9 10 9 10 10 9 10 9 10 10 9 9 9 9 9 10 10 9 9 9 9 10 10 9 9 9 9 10 10 9 9 9 9 10 10 9 9 10 10 9 9 10 10 9

12 15.5 12 15 12 15 15 12 15.5 15 15 15 12 15.5 15 15 15 12 12 15 12 12 15 15 12 15 12 12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 15 12 15 15 15 12

17.15 16.13 15.31 16.12 16.90 15.44 15.67 15.82 16.13 16.12 15.44 15.67 15.99 16.13 16.12 15.61 15.67 15.99 17.22 17.49 17.67 18.34 17.24 17.59 17.57 17.49 17.67 18.49 17.24 17.59 18.20 17.49 18.00 18.49 17.24 17.59 18.73 17.88 18.74 18.49 17.24 17.59 17.57 17.88 17.24 17.59 17.57 18.05 17.24 17.79 17.74

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 1 7/16 2 5/16 2 5/16 2 9/16 2 7/8 2 7/16 2 7/16 2 9/16 2 5/16 2 9/16 2 7/16 2 7/16 2 7/16 2 5/16 2 9/16 2 5/16 2 7/16 2 7/16 2 11/16 2 11/16 2 11/16 2 7/8 2 7/16 2 11/16 2 7/16 2 11/16 2 11/16 2 7/8 2 7/16 2 11/16 2 5/16 2 11/16 2 11/16 2 7/8 2 7/16 2 11/16 1 7/8 2 7/16 2 9/16 2 7/8 2 7/16 2 11/16 2 7/16 2 7/16 2 7/16 2 11/16 2 7/16 2 5/16 2 7/16 2 9/16 2 5/16

0.433 0.438 0.440 0.442 0.449 0.440 0.440 0.443 0.438 0.442 0.440 0.440 0.441 0.438 0.442 0.438 0.440 0.441 0.421 0.420 0.420 0.424 0.415 0.420 0.417 0.420 0.420 0.424 0.415 0.420 0.414 0.420 0.420 0.424 0.415 0.420 0.409 0.415 0.417 0.424 0.415 0.420 0.417 0.415 0.415 0.420 0.417 0.413 0.415 0.417 0.415

0.262 0.247 0.234 0.247 0.259 0.236 0.240 0.242 0.247 0.247 0.236 0.240 0.245 0.247 0.247 0.239 0.240 0.245 0.263 0.268 0.270 0.281 0.264 0.269 0.269 0.268 0.270 0.283 0.264 0.269 0.278 0.268 0.275 0.283 0.264 0.269 0.286 0.273 0.287 0.283 0.264 0.269 0.269 0.273 0.264 0.269 0.269 0.276 0.264 0.272 0.271

4

4

4

4

4

4

4

4

4

*2” Longer than standard. While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

55

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in. 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2

Nominal Weight lb/ft 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60 16.60

Grade and Upset Type E-75 IEU E-75 EU E-75 IEU E-75 IEU E-75 IEU E-75 EU E-75 EU E-75 IEU E-75 IEU E-75 EU X-95 IEU X-95 EU X-95 IEU X-95 IEU X-95 IEU X-95 EU X-95 EU X-95 IEU X-95 IEU X-95 EU G-105 IEU G-105 EU G-105 IEU G-105 IEU G-105 IEU G-105 EU G-105 EU G-105 IEU G-105 IEU G-105 EU S-135 IEU S-135 EU S-135 IEU S-135 IEU S-135 IEU S-135 EU S-135 EU S-135 IEU S-135 IEU S-135 EU S-135 IEU Z-140 IEU Z-140 EU Z-140 IEU Z-140 IEU Z-140 EU Z-140 IEU V-150 IEU V-150 EU V-150 IEU V-150 IEU V-150 EU V-150 IEU

Torsional Yield Strength ft-lb 30,800 30,800 30,800 30,800 30,800 30,800 30,800 30,800 30,800 30,800 39,000 39,000 39,000 39,000 39,000 39,000 39,000 39,000 39,000 39,000 43,100 43,100 43,100 43,100 43,100 43,100 43,100 43,100 43,100 43,100 55,500 55,500 55,500 55,500 55,500 55,500 55,500 55,500 55,500 55,500 55,500 57,500 57,500 57,500 57,500 57,500 57,500 61,600 61,600 61,600 61,600 61,600 61,600

Tensile Yield Strength lb 330,600 330,600 330,600 330,600 330,600 330,600 330,600 330,600 330,600 330,600 418,700 418,700 418,700 418,700 418,700 418,700 418,700 418,700 418,700 418,700 462,800 462,800 462,800 462,800 462,800 462,800 462,800 462,800 462,800 462,800 595,000 595,000 595,000 595,000 595,000 595,000 595,000 595,000 595,000 595,000 595,000 617,000 617,000 617,000 617,000 617,000 617,000 661,100 661,100 661,100 661,100 661,100 661,100

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

Pipe Body Polar Section Modulus cu in.

0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337 0.337

3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826 3.826

4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407 4.407

4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271 4.271

8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543 8.543

Internal Pressure psi 9,829 9,829 9,829 9,829 9,829 9,829 9,829 9,829 9,829 9,829 12,450 12,450 12,450 12,450 12,450 12,450 12,450 12,450 12,450 12,450 13,761 13,761 13,761 13,761 13,761 13,761 13,761 13,761 13,761 13,761 17,693 17,693 17,693 17,693 17,693 17,693 17,693 17,693 17,693 17,693 17,693 18,348 18,348 18,348 18,348 18,348 18,348 19,658 19,658 19,658 19,658 19,658 19,658

Collapse Pressure psi 10,392 10,392 10,392 10,392 10,392 10,392 10,392 10,392 10,392 10,392 12,765 12,765 12,765 12,765 12,765 12,765 12,765 12,765 12,765 12,765 13,825 13,825 13,825 13,825 13,825 13,825 13,825 13,825 13,825 13,825 16,773 16,773 16,773 16,773 16,773 16,773 16,773 16,773 16,773 16,773 16,773 17,228 17,228 17,228 17,228 17,228 17,228 18,103 18,103 18,103 18,103 18,103 18,103

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

56

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 5 13/32 5 15/32 5 3/8 5 11/32 5 13/32 5 23/32 5 13/16 4 7/8 5 5/8 5 31/32 5 17/32 5 19/32 5 1/2 5 15/32 5 13/32 5 27/32 5 13/16 4 7/8 5 5/8 5 31/32 5 19/32 5 21/32 5 9/16 5 17/32 5 13/32 5 29/32 5 13/16 4 7/8 5 5/8 5 31/32 5 25/32 5 13/16 5 3/4 5 11/16 5 1/2 6 1/16 5 13/16 4 15/16 5 5/8 5 31/32 5 19/32 5 17/32 5 13/16 4 31/32 5 5/8 5 31/32 5 5/8 5 19/32 5 13/16 5 1/16 5 5/8 5 31/32 5 11/16

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb NC46 OH FH H90 HT46 NC50 HT50 XT40 XT46 XT50 NC46 OH FH H90 HT46 NC50 HT50 XT40 XT46 XT50 NC46 OH FH H90 HT46 NC50 HT50 XT40 XT46 XT50 NC46 OH FH H90 HT46 NC50 HT50 XT40 XT46 XT50 GPDS46 HT46 HT50 XT40 XT46 XT50 GPDS46 HT46 HT50 XT40 XT46 XT50 GPDS46

6 1/4 3 1/4 5 7/8 3 3/4 6 3 6 3 1/4 6 1/4 3 1/4 6 5/8 3 3/4 6 1/4 3 3/4 5 1/4 3 6 3 1/2 6 3/8 3 3/4 6 1/4 3 1/4 5 7/8 3 1/2 6 3 6 3 1/4 6 1/4 3 1/4 6 5/8 3 3/4 6 1/4 3 3/4 5 1/4 3 6 3 1/2 6 3/8 3 3/4 6 1/4 3 6 3 1/4 6 1/4 2 3/4 6 3 1/4 6 1/4 3 1/4 6 5/8 3 3/4 6 1/4 3 3/4 5 1/4 3 6 3 1/2 6 3/8 3 3/4 6 1/4 2 3/4 6 3 6 1/4 2 3/4 6 1/4 2 3/4 6 1/4 3 1/4 6 5/8 3 1/2 6 3/8 3 1/2 5 1/4 2 13/16 6 3 1/2 6 3/8 3 3/4 6 1/4 3 1/4 6 1/4 3 1/4 6 3/8 3 1/2 5 1/4 2 13/16 6 3 1/2 6 3/8 3 3/4 6 1/4 3 1/4 6 1/4 3 1/4 6 3/8 3 1/2 5 1/4 2 13/16 6 1/4 3 1/4 6 3/8 3 1/2 6 1/4 3 1/4

34,000 27,300 34,800 39,000 47,600 38,100 52,700 37,400 58,100 75,200 34,000 33,900 34,800 39,000 47,600 38,100 52,700 37,400 58,100 75,200 39,700 40,300 40,200 39,000 47,600 38,100 52,700 37,400 58,100 75,200 44,900 43,400 40,200 51,500 47,600 45,100 65,700 44,000 58,100 75,200 43,300 47,600 65,700 44,000 58,100 75,200 43,300 47,600 65,700 44,000 70,200 81,200 43,300

901,200 714,000 976,200 938,400 901,200 939,100 939,100 648,900 910,300 1,085,500 901,200 884,800 976,200 938,400 901,200 939,100 939,100 648,900 910,300 1,085,500 1,048,400 1,043,800 1,111,600 938,400 901,200 939,100 939,100 648,900 910,300 1,085,500 1,183,900 1,191,100 1,111,600 1,221,100 901,200 1,109,900 1,109,900 751,600 910,300 1,085,500 901,200 901,200 1,109,900 751,600 910,300 1,085,500 901,200 901,200 1,109,900 751,600 1,069,300 1,256,300 901,200

17,600 14,600 17,600 18,800 28,600 19,800 31,600 22,400 34,900 45,100 17,600 18,200 17,600 18,800 28,600 19,800 31,600 22,400 34,900 45,100 20,500 21,500 20,100 18,800 28,600 19,800 31,600 22,400 34,900 45,100 23,200 24,600 20,100 24,600 28,600 23,400 39,400 26,400 34,900 45,100 26,000 28,600 39,400 26,400 34,900 45,100 26,000 28,600 39,400 26,400 42,100 48,700 26,000

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

1.10 0.89 1.13 1.27 1.55 1.24 1.71 1.21 1.89 2.44 0.87 0.87 0.89 1.00 1.22 0.98 1.35 0.96 1.49 1.93 0.92 0.94 0.93 0.90 1.10 0.88 1.22 0.87 1.35 1.74 0.81 0.78 0.72 0.93 0.86 0.81 1.18 0.79 1.05 1.35 0.78 0.83 1.14 0.77 1.01 1.31 0.75 0.77 1.07 0.71 1.14 1.32 0.70

9 9 9 9 9 9 9 10 10 10 9 9 9 9 9 9 9 10 10 10 9 9 9 9 9 9 9 10 10 10 9 9 9 9 9 9 9 10 10 10 9 9 9 10 10 10 9 9 9 10 10 10 9

12 12 12 12 15 12 15 15 15 15 12 12 12 12 15 12 15 15 15 15 12 12 12 12 15 12 15 15 15 15 12 12 12 12 15 12 15 15 15 15 12 15 15 15 15 15 12 15 15 15 15 15 12

19.14 17.58 19.03 18.61 19.59 19.19 18.73 17.92 18.63 19.17 19.14 18.02 19.03 18.61 19.59 19.19 18.73 17.92 18.63 19.17 19.57 18.69 19.96 18.61 19.59 19.19 18.73 17.92 18.63 19.17 19.96 19.07 19.96 19.96 19.59 19.65 19.52 18.23 18.63 19.17 19.14 19.59 19.52 18.23 18.63 19.17 19.14 19.59 19.52 18.23 19.74 19.67 19.14

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 3 1/8 3 5/8 2 7/8 3 1/8 3 1/8 3 5/8 3 5/8 2 7/8 3 3/8 3 5/8 3 1/8 3 3/8 2 7/8 3 1/8 3 1/8 3 5/8 3 5/8 2 7/8 3 3/8 3 5/8 2 7/8 3 1/8 2 5/8 3 1/8 3 1/8 3 5/8 3 5/8 2 7/8 3 3/8 3 5/8 2 5/8 2 7/8 2 5/8 2 5/8 3 1/8 3 3/8 3 3/8 2 11/16 3 3/8 3 5/8 3 1/8 3 1/8 3 3/8 2 11/16 3 3/8 3 5/8 3 1/8 3 1/8 3 3/8 2 11/16 3 1/8 3 3/8 3 1/8

0.585 0.596 0.580 0.585 0.583 0.595 0.595 0.579 0.589 0.595 0.585 0.590 0.580 0.585 0.583 0.595 0.595 0.579 0.589 0.595 0.580 0.585 0.575 0.585 0.583 0.595 0.595 0.579 0.589 0.595 0.575 0.581 0.575 0.575 0.583 0.590 0.589 0.575 0.589 0.595 0.585 0.583 0.589 0.575 0.589 0.595 0.585 0.583 0.589 0.575 0.583 0.589 0.585

0.293 0.269 0.291 0.285 0.300 0.294 0.287 0.274 0.285 0.293 0.293 0.276 0.291 0.285 0.300 0.294 0.287 0.274 0.285 0.293 0.299 0.286 0.305 0.285 0.300 0.294 0.287 0.274 0.285 0.293 0.305 0.292 0.305 0.305 0.300 0.295 0.301 0.299 0.279 0.293 0.293 0.300 0.299 0.279 0.285 0.293 0.293 0.300 0.299 0.279 0.302 0.301 0.293

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

*2” Longer than standard. While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

57

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in. 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 5

Nominal Weight lb/ft 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 19.50 19.50 19.50 19.50 19.50

Grade and Upset Type E-75 IEU E-75 EU E-75 IEU E-75 IEU E-75 EU E-75 EU E-75 IEU E-75 EU X-95 IEU X-95 EU X-95 IEU X-95 IEU X-95 EU X-95 EU X-95 IEU X-95 EU G-105 IEU G-105 EU G-105 IEU G-105 IEU G-105 EU G-105 EU G-105 IEU G-105 EU S-135 IEU S-135 EU S-135 IEU S-135 IEU S-135 EU S-135 EU S-135 IEU S-135 EU S-135 IEU Z-140 IEU Z-140 EU Z-140 IEU Z-140 EU Z-140 IEU V-150 IEU V-150 EU V-150 IEU V-150 EU V-150 IEU E-75 IEU E-75 IEU E-75 IEU E-75 IEU E-75 IEU

Torsional Yield Strength ft-lb 36,900 36,900 36,900 36,900 36,900 36,900 36,900 36,900 46,700 46,700 46,700 46,700 46,700 46,700 46,700 46,700 51,700 51,700 51,700 51,700 51,700 51,700 51,700 51,700 66,400 66,400 66,400 66,400 66,400 66,400 66,400 66,400 66,400 68,900 68,900 68,900 68,900 68,900 73,800 73,800 73,800 73,800 73,800 41,200 41,200 41,200 41,200 41,200

Tensile Yield Strength lb 412,400 412,400 412,400 412,400 412,400 412,400 412,400 412,400 522,300 522,300 522,300 522,300 522,300 522,300 522,300 522,300 577,300 577,300 577,300 577,300 577,300 577,300 577,300 577,300 742,200 742,200 742,200 742,200 742,200 742,200 742,200 742,200 742,200 769,700 769,700 769,700 769,700 769,700 824,700 824,700 824,700 824,700 824,700 395,600 395,600 395,600 395,600 395,600

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.430 0.362 0.362 0.362 0.362 0.362

3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 3.640 4.276 4.276 4.276 4.276 4.276

5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.498 5.275 5.275 5.275 5.275 5.275

5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.116 5.708 5.708 5.708 5.708 5.708

Pipe Body Polar Section Modulus cu in. 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 10.232 11.415 11.415 11.415 11.415 11.415

Internal Pressure psi 12,542 12,542 12,542 12,542 12,542 12,542 12,542 12,542 15,886 15,886 15,886 15,886 15,886 15,886 15,886 15,886 17,558 17,558 17,558 17,558 17,558 17,558 17,558 17,558 22,575 22,575 22,575 22,575 22,575 22,575 22,575 22,575 22,575 23,411 23,411 23,411 23,411 23,411 25,083 25,083 25,083 25,083 25,083 9,503 9,503 9,503 9,503 9,503

Collapse Pressure psi 12,964 12,964 12,964 12,964 12,964 12,964 12,964 12,964 16,421 16,421 16,421 16,421 16,421 16,421 16,421 16,421 18,149 18,149 18,149 18,149 18,149 18,149 18,149 18,149 23,335 23,335 23,335 23,335 23,335 23,335 23,335 23,335 23,335 24,199 24,199 24,199 24,199 24,199 25,927 25,927 25,927 25,927 25,927 9,962 9,962 9,962 9,962 9,962

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

58

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 5 1/2 3 3/8 5 7/16 5 13/32 5 13/16 5 13/16 5 5/8 5 31/32 5 21/32 5 11/16 5 9/16 5 13/32 5 15/16 5 13/16 5 5/8 5 31/32 5 23/32 5 3/4 5 5/8 5 7/16 6 1/32 5 13/16 5 5/8 5 31/32 5 15/16 5 31/32 5 27/32 5 9/16 6 7/32 5 13/16 5 5/8 5 31/32 5 21/32 5 19/32 5 27/32 5 5/8 5 31/32 5 11/16 5 21/32 5 29/32 5 5/8 5 31/32 5 3/4 5 7/8 5 13/16 6 3/8 5 5/8 5 31/32

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb NC46 OH 6 H90 HT46 NC50 HT50 XT46 XT50 NC46 OH H90 HT46 NC50 HT50 XT46 XT50 NC46 OH H90 HT46 NC50 HT50 XT46 XT50 NC46 OH H90 HT46 NC50 HT50 XT46 XT50 GPDS46 HT46 HT50 XT46 XT50 GPDS46 HT46 HT50 XT46 XT50 GPDS46 NC50 HT50 FH XT46 XT50

6 1/4 3 39,700 1,048,400 3 1/2 34,100 884,800 18,200 6 3 1/4 39,000 938,400 6 1/4 3 1/4 47,600 901,200 6 5/8 3 5/8 41,700 1,026,000 6 1/4 3 5/8 59,200 1,026,000 6 3 1/2 58,100 910,300 6 3/8 3 1/2 81,200 1,256,300 6 1/4 3 39,700 1,048,400 6 1/4 3 1/4 40,700 1,043,800 6 3 1/4 39,000 938,400 6 1/4 3 1/4 47,600 901,200 6 5/8 3 1/2 41,500 1,109,900 6 1/4 3 1/2 62,700 1,109,900 6 3 1/2 58,100 910,300 6 3/8 3 1/2 81,200 1,256,300 6 1/4 2 3/4 44,900 1,183,900 6 1/4 3 46,600 1,191,100 6 1/4 3 45,700 1,085,700 6 1/4 3 1/4 47,600 901,200 6 5/8 3 1/2 45,100 1,109,900 6 1/4 3 1/2 62,700 1,109,900 6 3 1/2 58,100 910,300 6 3/8 3 1/2 81,200 1,256,300 6 1/4 2 3/4 44,900 1,183,900 6 3/8 2 3/4 52,200 1,326,600 6 3/8 2 3/4 51,700 1,221,100 6 1/4 3 57,700 1,048,400 6 5/8 3 1/4 51,700 1,269,000 6 3/8 3 1/2 65,700 1,109,900 6 3 1/4 64,800 1,069,300 6 3/8 3 1/2 81,200 1,256,300 6 1/4 3 53,400 1,048,400 6 1/4 3 57,700 1,048,400 6 3/8 3 1/2 65,700 1,109,900 6 3 1/4 64,800 1,069,300 6 3/8 3 1/2 81,200 1,256,300 6 1/4 3 53,400 1,048,400 6 1/4 3 57,700 1,048,400 6 3/8 3 1/2 65,700 1,109,900 6 1/4 3 1/8 75,700 1,144,400 6 3/8 3 1/2 81,200 1,256,300 6 1/4 3 53,400 1,048,400 6 5/8 3 3/4 38,100 939,100 6 5/8 3 3/4 53,300 939,100 7 3 3/4 62,900 1,448,400 6 3 1/2 36,500 910,300 6 1/2 4 38,700 902,900

20,500 0.92 18,800 28,600 21,600 35,500 34,900 48,700 20,500 21,500 18,800 28,600 23,400 37,600 34,900 48,700 23,200 24,600 21,800 28,600 23,400 37,600 34,900 48,700 23,200 27,400 24,600 34,600 26,800 39,400 38,900 48,700 32,000 34,600 39,400 38,900 48,700 32,000 34,600 39,400 45,400 48,700 32,000 19,800 32,000 33,400 21,900 23,200

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

1.08 9 1.06 1.29 1.13 1.60 1.57 2.20 0.85 0.87 0.84 1.02 0.97 1.34 1.24 1.74 0.87 0.90 0.88 0.92 0.87 1.21 1.12 1.57 0.68 0.79 0.78 0.87 0.78 0.99 0.98 1.22 0.80 0.84 0.95 0.94 1.18 0.78 0.78 0.89 1.03 1.10 0.72 0.92 1.29 1.53 0.89 0.94

9 12 9 9 9 9 10 10 9 9 9 9 9 9 10 10 9 9 9 9 9 9 10 10 9 9 9 9 9 9 10 10 9 9 9 10 10 9 9 9 10 10 9 9 9 10 10 10

12 21.64 12 15 12 15 15 15 12 12 12 15 12 15 15 15 12 12 12 15 12 15 15 15 12 12 12 15 12 15 15 15 12 15 15 15 15 12 15 15 15 15 12 12 15 12 15 15

22.89 5 17/32 21.94 22.89 22.77 22.31 21.93 22.99 22.89 22.58 21.94 22.89 23.00 22.55 21.93 22.99 23.28 22.97 22.89 22.89 23.00 22.55 21.93 22.99 23.28 23.61 23.57 23.34 23.43 23.85 22.42 23.99 22.89 23.34 22.85 22.42 22.99 22.89 23.34 22.85 23.26 22.99 22.89 22.12 22.57 23.20 21.69 21.83

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 2 7/8 0.538 3 1/8 3 1/8 3 1/2 3 1/2 3 3/8 3 3/8 2 7/8 3 1/8 3 1/8 3 1/8 3 3/8 3 3/8 3 3/8 3 3/8 2 5/8 2 7/8 2 7/8 3 1/8 3 3/8 3 3/8 3 3/8 3 3/8 2 5/8 2 5/8 2 5/8 2 7/8 3 1/8 3 3/8 3 1/8 3 3/8 2 7/8 2 7/8 3 3/8 3 1/8 3 3/8 2 7/8 2 7/8 3 3/8 3 3 3/8 2 7/8 3 5/8 3 5/8 3 5/8 3 3/8 3 7/8

0.527 0.331 0.532 0.531 0.540 0.540 0.537 0.537 0.527 0.533 0.532 0.531 0.538 0.537 0.537 0.537 0.523 0.528 0.527 0.531 0.538 0.537 0.537 0.537 0.523 0.524 0.523 0.526 0.532 0.537 0.531 0.537 0.527 0.526 0.537 0.531 0.537 0.527 0.526 0.537 0.528 0.537 0.527 0.733 0.732 0.732 0.726 0.738

0.350 0.336 0.350 0.348 0.341 0.335 0.352 0.350 0.345 0.336 0.350 0.352 0.345 0.335 0.352 0.356 0.351 0.350 0.350 0.352 0.345 0.335 0.352 0.356 0.361 0.360 0.357 0.358 0.350 0.343 0.352 0.350 0.357 0.350 0.343 0.352 0.350 0.357 0.350 0.356 0.352 0.350 0.338 0.345 0.355 0.332 0.334

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

4 1/2

5

*2” Longer than standard.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

59

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in.

Nominal Weight lb/ft

5 5 5 5 5 5 5 5 5 5 5

19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 19.50 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60 25.60

Grade and Upset Type X-95 IEU X-95 IEU X-95 IEU X-95 IEU X-95 IEU G-105 IEU G-105 IEU G-105 IEU G-105 IEU G-105 IEU G-105 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU Z-140 IEU Z-140 IEU Z-140 IEU Z-140 IEU V-150 IEU V-150 IEU V-150 IEU V-150 IEU E-75 IEU E-75 IEU E-75 IEU E-75 IEU X-95 IEU X-95 IEU X-95 IEU X-95 IEU G-105 IEU G-105 IEU G-105 IEU G-105 IEU G-105 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU Z-140 IEU Z-140 IEU Z-140 IEU V-150 IEU V-150 IEU V-150 IEU

Torsional Yield Strength ft-lb 52,100 52,100 52,100 52,100 52,100 57,600 57,600 57,600 57,600 57,600 57,600 74,100 74,100 74,100 74,100 74,100 74,100 76,800 76,800 76,800 76,800 82,300 82,300 82,300 82,300 52,300 52,300 52,300 52,300 66,200 66,200 66,200 66,200 73,200 73,200 73,200 73,200 73,200 94,100 94,100 94,100 94,100 94,100 97,500 97,500 97,500 104,500 104,500 104,500

Tensile Yield Strength lb 501,100 501,100 501,100 501,100 501,100 553,800 553,800 553,800 553,800 553,800 553,800 712,100 712,100 712,100 712,100 712,100 712,100 738,400 738,400 738,400 738,400 791,200 791,200 791,200 791,200 530,100 530,100 530,100 530,100 671,500 671,500 671,500 671,500 742,200 742,200 742,200 742,200 742,200 954,300 954,300 954,300 954,300 954,300 989,600 989,600 989,600 1,060,300 1,060,300 1,060,300

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

Pipe Body Polar Section Modulus cu in.

0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500

4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.276 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000

5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 5.275 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069 7.069

5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 5.708 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245 7.245

11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 11.415 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491 14.491

Internal Pressure psi 12,037 12,037 12,037 12,037 12,037 13,304 13,304 13,304 13,304 13,304 13,304 17,105 17,105 17,105 17,105 17,105 17,105 17,738 17,738 17,738 17,738 19,005 19,005 19,005 19,005 13,125 13,125 13,125 13,125 16,625 16,625 16,625 16,625 18,375 18,375 18,375 18,375 18,375 23,625 23,625 23,625 23,625 23,625 24,500 24,500 24,500 26,250 26,250 26,250

Collapse Pressure psi 12,026 12,026 12,026 12,026 12,026 12,999 12,999 12,999 12,999 12,999 12,999 15,672 15,672 15,672 15,672 15,672 15,672 16,079 16,079 16,079 16,079 16,858 16,858 16,858 16,858 13,500 13,500 13,500 13,500 17,100 17,100 17,100 17,100 18,900 18,900 18,900 18,900 18,900 24,300 24,300 24,300 24,300 24,300 25,200 25,200 25,200 27,000 27,000 27,000

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

60

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 6 1/32 5 13/16 3 5/8 5 5/8 5 31/32 6 3/32 5 13/16 6 9/16 5 5/8 5 31/32 5 13/16 6 5/16 5 15/16 6 3/4 5 23/32 5 31/32 6 1/32 5 31/32 5 25/32 5 31/32 6 3/32 6 1/32 5 23/32 5 31/32 6 5/32 6 1/32 5 13/16 6 1/2 5 31/32 6 7/32 5 13/16 6 21/32 5 31/32 6 9/32 5 29/32 6 23/32 5 31/32 6 1/32 6 17/32 6 3/16 6 15/16 5 31/32 6 9/32 6 1/8 6 6 7/32 6 7/32 6 1/32 6 5/16

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb NC50 HT50 FH 7 XT46 XT50 NC50 HT50 FH XT46 XT50 GPDS50 NC50 HT50 FH XT46 XT50 GPDS50 HT50 XT46 XT50 GPDS50 HT50 XT46 XT50 GPDS50 NC50 HT50 FH XT50 NC50 HT50 FH XT50 NC50 HT50 FH XT50 GPDS50 NC50 HT50 FH XT50 GPDS50 HT50 XT50 GPDS50 HT50 XT50 GPDS50

6 5/8 3 1/2 45,100 1,109,900 6 5/8 3 3/4 53,300 939,100 3 3/4 62,900 1,448,400 33,400 6 3 1/2 58,100 910,300 6 1/2 4 62,500 902,900 6 5/8 3 1/4 51,700 1,269,000 6 5/8 3 1/2 66,200 1,109,900 7 3 3/4 62,900 1,448,400 6 3 1/2 58,100 910,300 6 1/2 4 62,500 902,900 6 5/8 3 1/2 60,400 1,110,200 6 5/8 2 3/4 63,400 1,551,700 6 5/8 3 1/2 66,200 1,109,900 7 1/4 3 1/2 72,500 1,619,200 6 3 1/2 58,100 910,300 6 1/2 3 3/4 77,000 1,085,500 6 5/8 3 1/2 60,400 1,110,200 6 5/8 3 1/2 66,200 1,109,900 6 3 1/2 58,100 910,300 6 1/2 3 3/4 77,000 1,085,500 6 5/8 3 1/2 60,400 1,110,200 6 5/8 3 1/2 66,200 1,109,900 6 1/4 3 1/4 70,200 1,069,300 6 1/2 3 3/4 77,000 1,085,500 6 5/8 3 1/2 60,400 1,110,200 6 5/8 3 1/2 45,100 1,109,900 6 5/8 3 3/4 53,300 939,100 7 3 1/2 62,900 1,619,200 6 5/8 3 3/4 77,300 1,085,500 6 5/8 3 57,800 1,416,200 6 5/8 3 1/2 66,200 1,109,900 7 3 1/2 62,900 1,619,200 6 5/8 3 3/4 77,300 1,085,500 6 5/8 2 3/4 63,400 1,551,700 6 5/8 3 1/2 66,200 1,109,900 7 1/4 3 1/2 72,500 1,619,200 6 5/8 3 3/4 77,300 1,085,500 6 5/8 3 1/2 60,400 1,110,200 6 5/8 2 3/4 63,400 1,551,700 6 5/8 3 1/2 66,200 1,109,900 7 1/4 3 1/4 78,700 1,778,300 6 5/8 3 1/2 90,700 1,256,300 6 5/8 3 1/2 60,400 1,110,200 6 5/8 3 1/4 78,000 1,269,000 6 5/8 3 3/4 90,700 1,256,300 6 5/8 3 1/4 72,200 1,269,200 6 5/8 3 1/4 78,000 1,269,000 6 5/8 3 3/8 97,000 1,337,300 6 5/8 3 1/4 72,200 1,269,200

23,400 32,000 1.21 34,900 37,500 26,800 39,700 33,400 34,900 37,500 36,200 32,900 39,700 37,400 34,900 46,200 36,200 39,700 34,900 46,200 36,200 39,700 42,100 46,200 36,200 23,400 32,000 37,400 46,400 30,000 39,700 37,400 46,400 32,900 39,700 37,400 46,400 36,200 32,900 39,700 41,200 54,400 36,200 46,800 54,400 43,300 46,800 58,200 43,300

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

0.87 1.02 10 1.12 1.20 0.90 1.15 1.09 1.01 1.09 1.05 0.86 0.89 0.98 0.78 1.04 0.82 0.86 0.76 1.00 0.79 0.80 0.85 0.94 0.73 0.86 1.02 1.20 1.48 0.87 1.00 0.95 1.17 0.87 0.90 0.99 1.06 0.83 0.67 0.70 0.84 0.96 0.64 0.80 0.93 0.74 0.75 0.93 0.69

9 9 12 10 10 9 9 10 10 10 9 9 9 10 10 10 9 9 10 10 9 9 10 10 9 9 9 10 10 9 9 10 10 9 9 10 10 9 9 9 10 10 9 9 10 9 9 10 9

12 15 23.20 15 15 12 15 12 15 15 12 12 15 12 15 15 12 15 15 15 12 15 15 15 12 12 15 12 15 12 15 12 15 12 15 12 15 12 12 15 12 15 12 15 15 12 15 15 12

22.61 22.57 6 1/2 21.69 21.83 23.07 23.10 23.20 21.69 21.83 21.61 23.89 23.10 24.38 21.69 22.39 21.61 23.10 21.69 22.39 21.61 23.10 22.78 22.39 21.61 28.08 28.01 29.16 28.14 28.97 28.53 29.16 28.14 29.36 29.53 29.82 28.14 28.08 29.36 29.53 30.30 28.67 28.08 29.02 28.67 28.54 29.02 28.93 28.54

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 3 3/8 3 5/8 0.732 3 3/8 3 7/8 3 1/8 3 3/8 3 5/8 3 3/8 3 7/8 3 3/8 2 5/8 3 3/8 3 3/8 3 3/8 3 5/8 3 3/8 3 3/8 3 3/8 3 5/8 3 3/8 3 3/8 3 1/8 3 5/8 3 3/8 3 3/8 3 5/8 3 3/8 3 5/8 2 7/8 3 3/8 3 3/8 3 5/8 2 5/8 3 3/8 3 3/8 3 5/8 3 3/8 2 5/8 3 3/8 3 1/8 3 3/8 3 3/8 3 1/8 3 3/8 3 1/8 3 1/8 3 1/4 3 1/8

0.727 0.732 0.355 0.726 0.738 0.722 0.726 0.732 0.726 0.738 0.727 0.713 0.726 0.726 0.726 0.731 0.727 0.726 0.726 0.731 0.727 0.726 0.720 0.731 0.727 0.641 0.646 0.641 0.646 0.631 0.640 0.641 0.646 0.627 0.640 0.640 0.646 0.641 0.627 0.640 0.635 0.640 0.641 0.634 0.640 0.636 0.634 0.637 0.636

0.346 0.345 0.332 0.334 0.353 0.353 0.355 0.332 0.334 0.346 0.365 0.353 0.373 0.332 0.343 0.346 0.353 0.332 0.343 0.346 0.353 0.348 0.343 0.346 0.430 0.428 0.446 0.430 0.443 0.436 0.446 0.430 0.449 0.436 0.456 0.430 0.430 0.449 0.436 0.464 0.439 0.430 0.444 0.439 0.437 0.444 0.443 0.437

5

5

5

5

5

5

5

5

5

5

5

*2” Longer than standard.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

61

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in. 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2

Nominal Weight lb/ft 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 21.90 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70 24.70

Grade and Upset Type E-75 IEU E-75 IEU E-75 IEU E-75 IEU X-95 IEU X-95 IEU X-95 IEU X-95 IEU G-105 IEU G-105 IEU G-105 IEU G-105 IEU G-105 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU Z-140 IEU Z-140 IEU Z-140 IEU Z-140 IEU Z-140 IEU V-150 IEU V-150 IEU V-150 IEU V-150 IEU V-150 IEU E-75 IEU E-75 IEU E-75 IEU E-75 IEU X-95 IEU X-95 IEU X-95 IEU X-95 IEU G-105 IEU G-105 IEU G-105 IEU G-105 IEU G-105 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU

Torsional Yield Strength ft-lb 50,700 50,700 50,700 50,700 64,200 64,200 64,200 64,200 71,000 71,000 71,000 71,000 71,000 91,300 91,300 91,300 91,300 91,300 94,700 94,700 94,700 94,700 94,700 101,400 101,400 101,400 101,400 101,400 56,600 56,600 56,600 56,600 71,700 71,700 71,700 71,700 79,200 79,200 79,200 79,200 79,200 101,800 101,800 101,800 101,800 101,800

Tensile Yield Strength lb 437,100 437,100 437,100 437,100 553,700 553,700 553,700 553,700 612,000 612,000 612,000 612,000 612,000 786,800 786,800 786,800 786,800 786,800 816,000 816,000 816,000 816,000 816,000 874,200 874,200 874,200 874,200 874,200 497,200 497,200 497,200 497,200 629,800 629,800 629,800 629,800 696,100 696,100 696,100 696,100 696,100 895,000 895,000 895,000 895,000 895,000

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.361 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415 0.415

4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.778 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670 4.670

5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 5.828 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630 6.630

7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.031 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844 7.844

Pipe Body Polar Section Modulus cu in. 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 14.062 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688 15.688

Internal Pressure psi 8,413 8,413 8,413 8,413 10,019 10,019 10,019 10,019 10,753 10,753 10,753 10,753 10,753 12,679 12,679 12,679 12,679 12,679 12,957 12,957 12,957 12,957 12,957 13,473 13,473 13,473 13,473 13,473 10,464 10,464 10,464 10,464 12,933 12,933 12,933 12,933 14,013 14,013 14,013 14,013 14,013 17,023 17,023 17,023 17,023 17,023

Collapse Pressure psi 8,615 8,615 8,615 8,615 10,912 10,912 10,912 10,912 12,061 12,061 12,061 12,061 12,061 15,507 15,507 15,507 15,507 15,507 16,081 16,081 16,081 16,081 16,081 17,230 17,230 17,230 17,230 17,230 9,903 9,903 9,903 9,903 12,544 12,544 12,544 12,544 13,865 13,865 13,865 13,865 13,865 17,826 17,826 17,826 17,826 17,826

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

62

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 6 15/32 6 13/32 6 7/32 6 15/32 6 5/8 6 13/32 6 7/32 6 15/32 6 11/16 6 13/32 6 7/32 6 15/32 6 7/16 6 29/32 6 5/8 6 5/16 6 15/32 6 11/16 6 15/16 6 21/32 6 11/32 6 15/32 6 23/32 7 6 23/32 6 9/32 6 15/32 6 25/32 6 17/32 6 13/32 6 7/32 6 15/32 6 11/16 6 13/32 6 7/32 6 15/32 6 25/32 6 15/32 6 7/32 6 15/32 6 17/32 7 6 23/32 6 9/32 6 15/32 6 25/32

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb FH HT55 XT54 XT57 FH HT55 XT54 XT57 FH HT55 XT54 XT57 GPDS55 FH HT55 XT54 XT57 GPDS55 FH HT55 XT54 XT57 GPDS55 FH HT55 XT54 XT57 GPDS55 FH HT55 XT54 XT57 FH HT55 XT54 XT57 FH HT55 XT54 XT57 GPDS55 FH HT55 XT54 XT57 GPDS55

7 7 6 3/4 7 7 7 6 3/4 7 7 1/4 7 6 3/4 7 7 7 1/2 7 6 3/4 7 7 7 1/2 7 6 3/4 7 7 7 1/2 7 6 3/4 7 7 7 7 6 3/4 7 7 1/4 7 6 3/4 7 7 1/4 7 6 3/4 7 7 7 1/2 7 6 3/4 7 7

4 4 4 1/4 4 1/4 3 3/4 4 4 1/4 4 1/4 3 1/2 4 4 1/4 4 1/4 4 1/8 3 4 4 1/4 4 1/4 4 3 4 4 1/4 4 1/4 4 3 4 4 4 1/4 4 4 4 4 1/4 4 1/4 3 1/2 4 4 1/4 4 1/4 3 1/2 4 4 1/4 4 1/4 4 3 4 4 4 1/4 4

57,900 77,200 70,400 94,300 65,100 77,200 70,400 94,300 75,000 77,200 70,400 94,300 74,200 90,200 77,200 70,400 94,300 74,200 90,200 77,200 70,400 94,300 74,200 90,200 77,200 86,600 94,300 74,200 57,900 77,200 70,400 94,300 75,000 77,200 70,400 94,300 75,000 77,200 70,400 94,300 74,200 90,200 77,200 86,600 94,300 74,200

1,265,800 1,265,800 960,700 1,208,700 1,448,400 1,265,800 960,700 1,208,700 1,619,200 1,265,800 960,700 1,208,700 1,292,500 1,925,500 1,265,800 960,700 1,208,700 1,292,500 1,925,500 1,265,800 960,700 1,208,700 1,292,500 1,925,500 1,265,800 1,155,100 1,208,700 1,292,500 1,265,800 1,265,800 960,700 1,208,700 1,619,200 1,265,800 960,700 1,208,700 1,619,200 1,265,800 960,700 1,208,700 1,292,500 1,925,500 1,265,800 1,155,100 1,208,700 1,292,500

31,200 46,300 42,200 56,600 35,700 46,300 42,200 56,600 40,000 46,300 42,200 56,600 44,500 47,700 46,300 42,200 56,600 44,500 47,700 46,300 42,200 56,600 44,500 47,700 46,300 52,000 56,600 44,500 31,200 46,300 42,200 56,600 40,000 46,300 42,200 56,600 40,000 46,300 42,200 56,600 44,500 47,700 46,300 52,000 56,600 44,500

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

1.14 1.52 1.39 1.86 1.01 1.20 1.10 1.47 1.06 1.09 0.99 1.86 1.05 0.99 0.85 0.77 1.03 0.81 0.95 0.82 0.74 1.00 0.78 0.89 0.76 0.85 0.93 0.73 1.02 1.36 1.24 1.67 1.05 1.08 0.98 1.32 0.95 0.97 0.89 1.19 0.94 0.89 0.76 0.85 0.93 0.73

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

12 15 15 15 12 15 15 15 12 15 15 15 12 12 15 15 15 12 12 15 15 15 12 12 15 15 15 12 12 15 15 15 12 15 15 15 12 15 15 15 12 12 15 15 15 12

24.83 25.32 24.04 24.72 25.45 25.42 24.04 24.72 26.62 25.42 24.04 24.72 24.83 28.24 25.42 24.04 24.72 24.83 28.24 25.42 24.04 24.72 24.83 28.24 25.42 24.63 24.72 24.83 27.37 27.85 26.46 24.14 29.07 27.85 26.57 27.25 29.07 27.85 26.57 27.25 27.27 30.69 27.85 27.17 27.25 27.27

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 3 7/8 3 7/8 4 1/8 4 1/8 3 5/8 3 7/8 4 1/8 4 1/8 3 3/8 3 7/8 4 1/8 4 1/8 3 7/8 2 7/8 3 7/8 4 1/8 4 1/8 3 7/8 2 7/8 3 7/8 4 1/8 4 1/8 3 7/8 2 7/8 3 7/8 3 7/8 4 1/8 3 7/8 3 7/8 3 7/8 4 1/8 4 1/8 3 3/8 3 7/8 4 1/8 4 1/8 3 3/8 3 7/8 4 1/8 4 1/8 3 7/8 2 7/8 3 7/8 3 7/8 4 1/8 3 7/8

0.910 0.908 0.915 0.915 0.904 0.908 0.915 0.915 0.898 0.908 0.915 0.915 0.910 0.886 0.908 0.915 0.915 0.910 0.886 0.908 0.915 0.915 0.910 0.886 0.908 0.908 0.915 0.910 0.872 0.870 0.877 0.877 0.859 0.870 0.877 0.877 0.859 0.870 0.877 0.877 0.872 0.848 0.870 0.870 0.877 0.872

0.380 0.387 0.368 0.378 0.389 0.389 0.368 0.378 0.407 0.389 0.368 0.378 0.380 0.432 0.389 0.368 0.378 0.380 0.432 0.389 0.368 0.378 0.380 0.432 0.389 0.377 0.378 0.380 0.419 0.426 0.405 0.415 0.445 0.426 0.406 0.417 0.445 0.426 0.406 0.417 0.417 0.469 0.426 0.416 0.417 0.417

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

5 1/2

*2” Longer than standard.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

63

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in.

Nominal Weight lb/ft

Grade and Upset Type

Torsional Yield Strength ft-lb

Tensile Yield Strength lb

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

Pipe Body Polar Section Modulus cu in.

Internal Pressure psi

Collapse Pressure psi

5 1/2

24.70

Z-140 IEU

105,600

928,100

0.415

4.670

6.630

7.844

15.688

17,489

18,486



24.70

Z-140 IEU

105,600

928,100

0.415

4.670

6.630

7.844

15.688

17,489

18,486



24.70

Z-140 IEU

105,600

928,100

0.415

4.670

6.630

7.844

15.688

17,489

18,486



24.70

Z-140 IEU

105,600

928,100

0.415

4.670

6.630

7.844

15.688

17,489

18,486 18,486



24.70

Z-140 IEU

105,600

928,100

0.415

4.670

6.630

7.844

15.688

17,489

5 1/2

24.70

V-150 IEU

113,100

994,400

0.415

4.670

6.630

7.844

15.688

18,386

19,807



24.70

V-150 IEU

113,100

994,400

0.415

4.670

6.630

7.844

15.688

18,386

19,807



24.70

V-150 IEU

113,100

994,400

0.415

4.670

6.630

7.844

15.688

18,386

19,807



24.70

V-150 IEU

113,100

994,400

0.415

4.670

6.630

7.844

15.688

18,386

19,807



24.70

V-150 IEU

113,100

994,400

0.415

4.670

6.630

7.844

15.688

18,386

19,807

5 7/8

23.40

E-75 IEU

58,600

469,000

0.361

5.153

6.254

8.125

16.251

7,453

8,065

5 7/8

23.40

X-95 IEU

74,200

594,100

0.361

5.153

6.254

8.125

16.251

8,775

10,216

5 7/8

23.40

G-105 IEU

82,000

656,600

0.361

5.153

6.254

8.125

16.251

9,362

11,291

5 7/8

23.40

S-135 IEU

105,500

844,200

0.361

5.153

6.254

8.125

16.251

10,825

14,517

5 7/8

23.40

Z-140 IEU

109,400

875,500

0.361

5.153

6.254

8.125

16.251

11,023

15,054 16,130

5 7/8

23.40

V-150 IEU

117,200

938,000

0.361

5.153

6.254

8.125

16.251

11,376

5 7/8

26.30

E-75 IEU

65,500

533,900

0.415

5.045

7.119

9.083

18.165

9,558

9,271

5 7/8

26.30

X-95 IEU

83,000

676,300

0.415

5.045

7.119

9.083

18.165

11,503

11,744

5 7/8

26.30

G-105 IEU

91,700

747,400

0.415

5.045

7.119

9.083

18.165

12,414

12,980

5 7/8

26.30

S-135 IEU

117,900

961,000

0.415

5.045

7.119

9.083

18.165

14,892

16,688

5 7/8

26.30

Z-140 IEU

122,300

996,600

0.415

5.045

7.119

9.083

18.165

15,266

17,306

5 7/8

26.30

V-150 IEU

131,000

1,067,800

0.415

5.045

7.119

9.083

18.165

15,976

18,543

6 5/8

25.20

E-75 IEU

70,600

489,500

0.330

5.965

6.526

9.786

19.572

4,788

6,538



25.20

E-75 IEU

70,600

489,500

0.330

5.965

6.526

9.786

19.572

4,788

6,538



25.20

E-75 IEU

70,600

489,500

0.330

5.965

6.526

9.786

19.572

4,788

6,538

6 5/8

25.20

X-95 IEU

89,400

620,000

0.330

5.965

6.526

9.786

19.572

5,321

8,281



25.20

X-95 IEU

89,400

620,000

0.330

5.965

6.526

9.786

19.572

5,321

8,281



25.20

X-95 IEU

89,400

620,000

0.330

5.965

6.526

9.786

19.572

5,321

8,281

6 5/8

25.20

G-105 IEU

98,800

685,200

0.330

5.965

6.526

9.786

19.572

5,500

9,153



25.20

G-105 IEU

98,800

685,200

0.330

5.965

6.526

9.786

19.572

5,500

9,153



25.20

G-105 IEU

98,800

685,200

0.330

5.965

6.526

9.786

19.572

5,500

9,153

6 5/8

25.20

S-135 IEU

127,000

881,000

0.330

5.965

6.526

9.786

19.572

6,036

11,768



25.20

S-135 IEU

127,000

881,000

0.330

5.965

6.526

9.786

19.572

6,036

11,768



25.20

S-135 IEU

127,000

881,000

0.330

5.965

6.526

9.786

19.572

6,036

11,768



25.20

S-135 IEU

127,000

881,000

0.330

5.965

6.526

9.786

19.572

6,036

11,768

6 5/8

25.20

Z-140 IEU

131,700

913,700

0.330

5.965

6.526

9.786

19.572

6,121

12,204



25.20

Z-140 IEU

131,700

913,700

0.330

5.965

6.526

9.786

19.572

6,121

12,204



25.20

Z-140 IEU

131,700

913,700

0.330

5.965

6.526

9.786

19.572

6,121

12,204



25.20

Z-140 IEU

131,700

913,700

0.330

5.965

6.526

9.786

19.572

6,121

12,204

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

64

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Tool Joint Data

Assembly Data

Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb FH 7 1/2

3

HT55

7

90,200 1,925,500 47,700

XT54

6 3/4

4

XT57

7

4 1/4

GPDS55

7 1/8

FH

0.85

Torsional Ratio Tool Joint to Pipe

*

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

Minimum Tool Joint OD for Prem. Class in.

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in.

10

12

30.69

7 1/32

2 7/8

0.848

0.469

5 1/2

0.83

10

15

28.42

6 21/32

3 5/8

0.863

0.435

86,600 1,155,100 52,000

0.82

10

15

27.17

6 11/32

3 7/8

0.870

0.416

94,300 1,208,700 56,600

0.89

10

15

27.25

6 15/32

4 1/8

0.877

0.417

3 3/4

89,300 1,475,100 53,600

0.85

10

12

28.12

6 23/32

3 5/8

0.865

0.430

3 3/4 87,700 1,448,400 52,600

7 1/2

3

90,200 1,925,500 47,700

0.80

10

12

30.69

7 3/32

2 7/8

0.848

0.469

HT55

7

3 3/4

87,700 1,448,400 52,600

0.78

10

15

28.42

6 23/32

3 5/8

0.863

0.435

XT54

6 3/4

4

86,600 1,155,100 52,000

0.77

10

15

27.17

6 7/16

3 7/8

0.870

0.416

XT57

7

4

106,200 1,403,100 63,700

0.94

10

15

27.85

6 15/32

3 7/8

0.870

0.426

GPDS55

7 1/8

5 1/2

4 1/8

66,600 1,196,700 40,000

0.59

10

12

27.31

6 31/32

4

0.875

0.418

XT57

7

4 1/4

94,300 1,208,700 56,600

1.61

10

15

26.48

6 15/32

4 1/8

1.055

0.405

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

1.27

10

15

26.48

6 15/32

4 1/8

1.055

0.405

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

1.15

10

15

26.48

6 15/32

4 1/8

1.055

0.405

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

0.89

10

15

26.48

6 15/32

4 1/8

1.055

0.405

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

0.86

10

15

26.48

6 17/32

4 1/8

1.055

0.405

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

0.80

10

15

26.48

6 5/8

4 1/8

1.055

0.405

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

1.44

10

15

29.12

6 15/32

4 1/8

1.014

0.445

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

1.14

10

15

29.12

6 15/32

4 1/8

1.014

0.445

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

1.03

10

15

29.12

6 15/32

4 1/8

1.014

0.445

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

0.80

10

15

29.12

6 5/8

4 1/8

1.014

0.445

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

0.77

10

15

29.12

6 21/32

4 1/8

1.014

0.445

5 7/8

XT57

7

4 1/4

94,300 1,208,700 56,600

0.72

10

15

29.12

6 3/4

4 1/8

1.014

0.445

5 7/8

FH

8

5

73,700 1,448,400 38,400

1.04

10

13

28.79

7 7/16

4 7/8

1.418

0.440 6 5/8

HT65

8

5

99,700 1,448,400 59,800

1.41

10

16

29.38

7 11/32

4 7/8

1.415

0.449

XT65

8

5

135,300 1,543,700 81,200

1.92

10

15

29.18

7 11/32

4 7/8

1.416

0.446

FH

8

5

73,700 1,448,400 38,400

0.82

10

13

28.79

7 5/8

4 7/8

1.418

0.440 6 5/8

HT65

8

5

99,700 1,448,400 59,800

1.12

10

16

29.38

7 11/32

4 7/8

1.415

0.449

XT65

8

5

135,300 1,543,700 81,200

1.51

10

15

29.18

7 11/32

4 7/8

1.416

0.446 0.463 6 5/8

FH

8 1/4

4 3/4

86,200 1,678,100 44,600

0.87

10

13

30.25

7 11/16

4 5/8

1.409

HT65

8

5

99,700 1,448,400 59,800

1.01

10

16

29.38

7 13/32

4 7/8

1.415

0.449

XT65

8

5

135,300 1,543,700 81,200

1.37

10

15

29.18

7 11/32

4 7/8

1.416

0.446 0.495 6 5/8

FH

8 1/2

4 1/4

109,200 2,102,300 56,100

0.86

10

13

32.36

7 29/32

4 1/8

1.394

HT65

8

5

99,700 1,448,400 59,800

0.79

10

16

29.38

7 5/8

4 7/8

1.415

0.449

XT65

8

5

135,300 1,543,700 81,200

1.07

10

15

29.18

7 11/32

4 7/8

1.416

0.446 0.446

GPDS65 FH HT65 XT65 GPDS65

4 7/8 107,500 1,596,400 64,500

0.85

10

13

29.13

7 5/8

4 3/4

1.414

8 1/2

8

4 1/4

109,200 2,102,300 56,100

0.83

10

13

32.36

7 31/32

4 1/8

1.394

0.495 6 5/8

8

5

99,700 1,448,400 59,800

0.76

10

16

29.38

7 11/16

4 7/8

1.415

0.449

5

135,300 1,543,700 81,200

1.03

10

15

29.18

7 11/32

4 7/8

1.416

0.446

4 7/8 108,200 1,596,400 64,900

0.82

10

13

29.91

7 21/32

4 3/4

1.413

0.458

8 8 1/4

*2” Longer than standard.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

65

G R A N T

P R I D E C O

Drill pipe data tables Pipe Data Size OD in. 6 5/8 6 5/8 6 5/8 6 5/8 6 5/8 6 5/8 6 5/8

Nominal Weight lb/ft 25.20 25.20 25.20 25.20 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70 27.70

Grade and Upset Type V-150 IEU V-150 IEU V-150 IEU V-150 IEU E-75 IEU E-75 IEU E-75 IEU X-95 IEU X-95 IEU X-95 IEU G-105 IEU G-105 IEU G-105 IEU S-135 IEU S-135 IEU S-135 IEU S-135 IEU Z-140 IEU Z-140 IEU Z-140 IEU Z-140 IEU V-150 IEU V-150 IEU V-150 IEU V-150 IEU

Torsional Yield Strength ft-lb 141,200 141,200 141,200 141,200 76,300 76,300 76,300 96,600 96,600 96,600 106,800 106,800 106,800 137,300 137,300 137,300 137,300 142,400 142,400 142,400 142,400 152,600 152,600 152,600 152,600

Tensile Yield Strength lb 978,900 978,900 978,900 978,900 534,200 534,200 534,200 676,700 676,700 676,700 747,900 747,900 747,900 961,600 961,600 961,600 961,600 997,200 997,200 997,200 997,200 1,068,400 1,068,400 1,068,400 1,068,400

Wall Thickness in.

Nominal ID in.

Pipe Body Section Area sq in.

Pipe Body Section Modulus cu in.

Pipe Body Polar Section Modulus cu in.

0.330 0.330 0.330 0.330 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362 0.362

5.965 5.965 5.965 5.965 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901 5.901

6.526 6.526 6.526 6.526 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123 7.123

9.786 9.786 9.786 9.786 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578 10.578

19.572 19.572 19.572 19.572 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156 21.156

Internal Pressure psi 6,260 6,260 6,260 6,260 5,894 5,894 5,894 6,755 6,755 6,755 7,103 7,103 7,103 7,813 7,813 7,813 7,813 7,881 7,881 7,881 7,881 7,970 7,970 7,970 7,970

Collapse Pressure psi 13,075 13,075 13,075 13,075 7,172 7,172 7,172 9,084 9,084 9,084 10,040 10,040 10,040 12,909 12,909 12,909 12,909 13,387 13,387 13,387 13,387 14,343 14,343 14,343 14,343

Notes: 1. Torsional yield strength of conventional tool joints is calculated per API RP7G Latest Edition. 2. Torsional yield strength of Double-Shoulder Tool Joints (HT, XT, GPDS) is calculated per a formula similar to the one in API RP7G Latest Edition. 3. The make-up torque of the tool joint is based on the lower of 60% of the Tool joint torsional yield strength or the T3 value calculated per the equation in API RP7G Latest Edition. Minimum make-up torques of 50% of the tool joint torsional strength, excluding contributions of the secondary shoulder, may also be used. 4. Performance ratings for eXtreme Torque Metal-Seal (XT-M) Connection types are comparable to these shown for XT of the same size. 5. The adjusted weight of the assembly is based on an average pipe length of 29.4 ft plus the tool joint length. 6. The minimum tool joint OD for premium class is based on a tool joint torsional strength of 80% of the torsional strength of the premium class pipe to which it is attached.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

66

© Grant Prideco. All rights reserved. December 2003

D R I L L

pipe

data

ta b le s

*

Minimum Tool Joint OD for Prem. Class in. 8 1/32 7 3/4 7 11/32 7 3/4 7 1/2 7 11/32 7 11/32 7 11/16 7 3/8 7 11/32 7 3/4 7 15/32 7 11/32 8 7 23/32 7 11/32 7 23/32 8 1/32 7 3/4 7 11/32 7 3/4 8 1/8 7 27/32 7 7/16 7 27/32

Tool Joint Data Torsional Tensile Connection Outside Inside Yield Yield Make-up Type Diameter Diameter Strength Strength Torque in. in. ft-lb lb ft-lb FH HT65 XT65 GPDS65 FH HT65 XT65 FH HT65 XT65 FH HT65 XT65 FH HT65 XT65 GPDS65 FH HT65 XT65 GPDS65 FH HT65 XT65 GPDS65

8 1/2 8 8 8 1/4 8 8 8 8 1/4 8 8 8 1/4 8 8 8 1/2 8 8 8 8 1/2 8 8 8 1/4 8 1/2 8 8 8 1/4

4 1/4 109,200 5 99,700 5 135,300 4 7/8 108,200 5 73,700 5 99,700 5 135,300 4 3/4 86,200 5 99,700 5 135,300 4 3/4 86,200 5 99,700 5 135,300 4 1/4 109,200 5 99,700 5 135,300 4 7/8 107,500 4 1/4 109,200 5 99,700 5 135,300 4 7/8 108,200 4 1/4 109,200 5 99,700 5 135,300 4 7/8 108,200

2,102,300 1,448,400 1,543,700 1,596,400 1,448,400 1,448,400 1,543,700 1,678,100 1,448,100 1,543,700 1,678,100 1,448,400 1,543,700 2,102,300 1,448,400 1,543,700 1,596,400 2,102,300 1,448,400 1,543,700 1,596,400 2,102,300 1,448,400 1,543,700 1,596,400

56,100 59,800 81,200 64,900 38,400 59,800 81,200 44,600 59,800 81,200 44,600 59,800 81,200 56,100 59,800 81,200 64,500 56,100 59,800 81,200 64,900 56,100 59,800 81,200 64,900

Assembly Data *

Torsional Ratio Tool Joint to Pipe

Pin Tong Space in.

Box Tong Space in.

Adjusted Weight lb/ft

0.77 0.71 0.96 0.77 0.97 1.31 1.77 0.89 1.03 1.40 0.81 0.93 1.27 0.80 0.73 0.99 0.78 0.77 0.70 0.95 0.76 0.72 0.65 0.89 0.71

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

13 16 15 13 13 16 15 13 16 15 13 16 15 13 16 15 13 13 16 15 13 13 16 15 13

32.36 29.38 29.18 29.91 30.61 31.19 31.00 32.07 31.19 31.00 32.07 31.19 31.00 34.18 31.19 31.00 30.96 34.18 31.19 31.00 31.74 34.18 31.19 31.00 31.74

Drift Displace- Size Diameter Capacity ment OD in. US gal/ft US gal/ft in. 4 1/8 4 7/8 4 7/8 4 3/4 4 7/8 4 7/8 4 7/8 4 5/8 4 7/8 4 7/8 4 5/8 4 7/8 4 7/8 4 1/8 4 7/8 4 7/8 4 3/4 4 1/8 4 7/8 4 7/8 4 3/4 4 1/8 4 7/8 4 7/8 4 3/4

1.394 1.415 1.416 1.413 1.389 1.386 1.387 1.381 1.386 1.387 1.381 1.386 1.387 1.365 1.386 1.387 1.385 1.365 1.386 1.387 1.385 1.365 1.386 1.387 1.385

0.495 0.449 0.446 0.458 0.468 0.477 0.474 0.491 0.477 0.474 0.491 0.477 0.474 0.523 0.477 0.474 0.474 0.523 0.477 0.474 0.485 0.523 0.477 0.474 0.485

6 5/8

6 5/8 6 5/8

6 5/8

6 5/8

6 5/8

6 5/8

*2” Longer than standard.

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

67