GP Torsional Tensile Value for Tool Joints

G R A N T

P R I D E C O

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints

T

he charts that follow provide the torsional strength, tensile strength, and recommended make-up torque for tool joints. The data within this section shall apply to Drill Pipe, Heavy Weight Drill Pipe, and Pup Joints (excluding sour service grade tool joints of yield strength less than 120ksi). Locate the appropriate chart for the tool joint of interest. Select the desired tool joint OD at the top of the chart and the desired tool joint ID from the left-hand side of the chart. The torsional strength (ft-lb), tensile strength (lb),

and recommended make-up torque (ft-lb) are listed in the chart for each combination of tool joint geometries. The values in the tables were calculated per API RP7G, Latest Edition. Torsional values for double-shouldered connections (HT, XT and GPDS) were calculated per a modified form of the equation in API RP7G, Latest Edition. Make-up torque values are based on the lower of 60% of the tool joint torsional yield strength or the calculated T3 value. These tables are for reference only.

API 2-3/8 OH OD ID in. 2

1 7/8

1 3 /4

Data (see below)

3 in.

3-1/8 in.

2-3/8 WO OD 3-1/4 in.

3-3/8 in.

Torque 3100 B 4500 4600 4600 Tension 206300 206300 206300 206300 Make-up 1900 2600 2600 2600 Torque 3100 B 4700 B 5600 5700 Tension 251900 251900 251900 251900 Make-up 1900 2800 3100 3100 Torque 3100 B 4700 B 6500 B 6600 Tension 294600 294600 294600 294600 Make-up 1900 2800 3700 3700

3-1/2 in. 4600 206300 2600 5700 251900 3100 6700 294600 3700

ID in. 2

1 7/8

1 3 /4

Data (see below)

3 in.

in. 1 1/2

1 3 /8

1 1 /4

Data 2-5/8 (see below) in.

2-3/4 in.

3-1/4 in.

3-3/8 in.

Torque 2500 B 4200 B 4300 4300 Tension 195700 195700 195700 195700 Make-up 1500 2400 2400 2400 Torque 2500 B 4200 B 5300 5400 Tension 241300 241300 241300 241300 Make-up 1500 2500 3000 3000 Torque 2500 B 4200 B 5900 B 6400 Tension 284000 284000 284000 284000 Make-up 1500 2500 3500 3500

2-3/8 PAC OD ID

3-1/8 in.

3-1/2 in. 4300 195700 2400 5400 241300 3000 6400 284000 3500

2-7/8 FH OD 2-7/8 in.

3 in.

3-1/8 in.

Torque 2500 B 3800 B 4000 4000 Tension 204600 204600 204600 204600 Make-up 1500 2300 2300 2300 Torque 2500 B 3800 B 4700 4700 Tension 238500 238500 238500 238500 Make-up 1500 2300 2600 2600 Torque 2500 B 3800 B 5100 B 5400 Tension 269400 269400 269400 269400 Make-up 1500 2300 3000 3000

4100 204600 2300 4800 238500 2600 5400 269400 3000

ID in. 2 1/8

2

1 7/8

Data (see below)

4 in.

4-1/8 in.

4-1/4 in.

4-3/8 in.

4-1/2 in.

Torque 7900 B 10500 B 13300 B 14900 15000 Tension 558700 558700 558700 558700 558700 Make-up 4700 6300 7700 7700 7700 Torque 7900 B 10500 B 13300 B 16200 B 16400 Tension 607300 607300 607300 607300 607300 Make-up 4700 6300 8000 8400 8400 Torque 7900 B 10500 B 13300 B 16200 B 17700 Tension 653000 653000 653000 653000 653000 Make-up 4700 6300 8000 9000 9000

see page 79 for notes

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

68

© Grant Prideco. All rights reserved. December 2003

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints

2-7/8 SLH90 OD ID in. 2 1 /4

2 5 / 32

2 1 / 32

Data 3-3/4 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

3-7/8 in.

2-7/8 PAC OD 4 in.

10100 10100 10200 343800 343800 343800 6100 6100 6100 10800 B 11300 11400 382800 382800 382800 6500 6800 6800 10800 B 12800 12900 432100 432100 432100 6500 7700 7700

4-1/8 in.

4-1/4 in.

10300 343800 6100 11500 382800 6800 13000 432100 7700

10300 343800 6100 11600 382800 6800 13000 432100 7700

ID in. 1 5 /8

1 1/2

1 3 /8

Data 2-7/8 (see below) in.

3-1/8 in.

3-1/4 in.

Torque 3700 B 4900 4900 Tension 236200 236200 236200 Make-up 2200 2800 2800 Torque 3700 B 5200 B 5700 Tension 273000 273000 273000 Make-up 2200 3100 3200 Torque 3700 B 5200 B 6500 Tension 306900 306900 306900 Make-up 2200 3100 3600

5000 236200 2800 5800 273000 3200 6500 306900 3600

2-7/8 WO OD ID in.

Data 3-3/4 (see below) in.

3-7/8 in.

4 in.

4-1/8 in.

4-1/4 in.

5600 218600 3000 7200 277600 3900 8700 333500 4700

5600 218600 3000 7300 277600 3900 8800 333500 4700

ID in. 2

1 7/8

1 3 /4

Data (see below)

4 in.

1 7/8

1 3 /4

1 5 /8

1 1/2

1 3 /8

Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

3200 B 271000 1900 3200 B 313700 1900 3200 B 353400 1900 3200 B 390300 1900 3200 B 424100 1900

3-1/4 in.

4-1/8 in.

4-1/4 in.

Torque 11900 12000 12100 Tension 459400 459400 459400 Make-up 6400 6400 6400 Torque 12800 B 13200 13300 Tension 505100 505100 505100 Make-up 7000 7000 7000 Torque 12800 B 14300 14400 Tension 547800 547800 547800 Make-up 7600 7600 7600

NC 26 OD Data 3-1/8 (see below) in.

3-3/8 in. 5000 236200 2800 5800 273000 3200 6600 306900 3600

2-7/8 XH OD

Torque 5500 5500 5600 2 9 /16 Tension 218600 218600 218600 Make-up 3000 3000 3000 Torque 7000 7100 7100 2 7 /16 Tension 277600 277600 277600 Make-up 3900 3900 3900 Torque 7700 B 8600 8600 2 5 /16 Tension 333500 333500 333500 Make-up 4600 4700 4700

ID in.

3 in.

4-3/8 in. 12100 459400 6400 13400 505100 7000 14500 547800 7600

4-1/2 in. 12200 459400 6400 13500 505100 7000 14700 547800 7600

NC 31 OD 3-3/8 in.

3-1/2 in.

3-5/8 in.

5000 B 6100 6100 6200 271000 271000 271000 271000 3000 3300 3300 3300 5000 B 6900 B 7200 7200 313700 313700 313700 313700 3000 3900 3900 3900 5000 B 6900 B 8100 8200 353400 353400 353400 353400 3000 4100 4400 4400 5000 B 6900 B 8800 B 9000 390300 390300 390300 390300 3000 4100 4900 4900 5000 B 6900 B 8800 B 9800 424100 424100 424100 424100 3000 4100 5300 5300

ID in. 2 3 /8

2 1 /4

2 1/8

2

1 7/8

Data 3-7/8 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

8800 341100 4800 8900 B 395600 5300 8900 B 447100 5300 8900 B 495700 5300 8900 B 541400 5300

4 in.

4-1/8 in.

8900 341100 4800 10400 395600 5600 11500 B 447100 6400 11500 B 495700 6900 11500 B 541400 6900

9000 341100 4800 10500 395600 5600 11900 447100 6400 13200 495700 7100 14200 B 541400 7800

4-1/4 in. 9000 341100 4800 10500 395600 5600 12000 447100 6400 13300 495700 7100 14600 541400 7800

4-3/8 in. 9100 341100 4800 10600 395600 5600 12100 447100 6400 13400 495700 7100 14700 541400 7800

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

69

G R A N T

P R I D E C O

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints NC 35 OD ID in. 2 13 /16

2 11 /16

2 9 /16

2 7 /16

2 5 /16

Data 4-1/4 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

9500 338200 5200 11100 B 403000 6200 11100 B 464900 6700 11100 B 523800 6700 11100 B 579700 6700

4-3/8 in. 9600 338200 5200 11500 403000 6200 13300 464900 7200 14100 B 523800 8100 14100 B 579700 8500

NC 38 OD 4-1/2 in. 9700 338200 5200 11600 403000 6200 13400 464900 7200 15200 523800 8100 16900 579700 9000

4-5/8 in. 9700 338200 5200 11700 403000 6200 13500 464900 7200 15300 523800 8100 17000 579700 9000

4-3/4 in. 9800 338200 5200 11800 403000 6200 13600 464900 7200 15400 523800 8100 17100 579700 9000

ID

in.

Data 4-1/2 (see below) in.

Torque 2 13 /16 Tension Make-up Torque 2 11 /16 Tension Make-up Torque 2 9 /16 Tension Make-up Torque 2 7 /16 Tension Make-up Torque 2 1 / 8 Tension Make-up

12100 B 522500 7300 12100 B 587300 7300 12100 B 649200 7300 12100 B 708100 7300 12100 B 842400 7300

3-1/2 FH OD ID

in. 2 11 /16

2 9 /16

2 7 /16

2 5 /16

2 3 /16

Data 4-3/8 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

9800 B 541900 5900 9800 B 603700 5900 9800 B 662600 5900 9800 B 718600 5900 9800 B 771600 5900

4-1/2 in. 13000 B 541900 7800 13000 B 603700 7800 13000 B 662600 7800 13000 B 718600 7800 13000 B 771600 7800

in. 2 15 /16

2 13 /16

2 11 /16

2 9 /16

2 7 /16

70

Data 4-1/2 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

13000 427000 7100 14600 B 494800 8200 14600 B 559600 8800 14600 B 621400 8800 14600 B 680300 8800

4-5/8 in. 13000 427000 7100 15200 494800 8200 17200 559600 9300 18100 B 621400 10400 18100 B 680300 10900

15600 B 522500 8600 15600 B 587300 9400 15600 B 649200 9400 15600 B 708100 9400 15600 B 842400 9400

4-3/4 in.

4-7/8 in.

16100 16200 522500 522500 8600 8600 18100 18200 587300 587300 9700 9700 19200 B 20200 649200 649200 10700 10700 19200 B 22100 708100 708100 11500 11700 19200 B 22900 B 842400 842400 11500 13700

5 in. 16300 522500 8600 18300 587300 9700 20300 649200 10700 22200 708100 11700 26500 842400 14000

3-1/2 H90 OD 4-5/8 in. 15600 541900 8100 16300 B 603700 9000 16300 B 662600 9800 16300 B 718600 9800 16300 B 771600 9800

4-3/4 in. 15700 541900 8100 17600 603700 9000 19400 662600 10000 19700 B 718600 10800 19700 B 771600 11600

4-7/8 in. 15800 541900 8100 17700 603700 9000 19500 662600 10000 21200 718600 10800 22800 771600 11600

ID in. 3

2 7/8

2 3 /4

2 5 /8

2 1/2

Data 4-3/4 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

18400 528600 10800 18800 B 597800 11300 18800 B 664000 11300 18800 B 727400 11300 18800 B 787800 11300

3-1/2 OH OD ID

4-5/8 in.

4-7/8 in. 18500 528600 10800 21000 597800 12200 23000 664000 13600 23000 B 727400 13800 23000 B 787800 13800

5 in.

5-1/8 in.

5-1/4 in.

18800 528600 10800 21300 597800 12200 23700 664000 13600 26000 727400 15000 28200 787800 16200

18900 528600 10800 21400 597800 12200 23800 664000 13600 26200 727400 15000 28400 787800 16200

3-3/4 in.

3-7/8 in.

4 in.

6200 253200 3400 7500 304700 4100 8700 353300 4800 9900 399000 5400 10900 441700 6000

6200 253200 3400 7500 304700 4100 8800 353300 4800 9900 399000 5400 11000 441700 6000

6300 253200 3400 7600 304700 4100 8800 353300 4800 10000 399000 5400 11100 441700 6000

18600 528600 10800 21200 597800 12200 23600 664000 13600 25900 727400 15000 27300 B 787800 16200

3-1/2 PAC OD 4-3/4 in.

4-7/8 in.

5 in.

13100 427000 7100 15300 494800 8200 17300 559600 9300 19300 621400 10400 21100 680300 11400

13200 427000 7100 15400 494800 8200 17400 559600 9300 19400 621400 10400 21300 680300 11400

13300 427000 7100 15500 494800 8200 17500 559600 9300 19500 621400 10400 21400 680300 11400

© Grant Prideco. All rights reserved. December 2003

ID

in. 2 1 /4

2 1/8

2

1 7/8

1 3 /4

Data 3-1/2 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

6100 253200 3400 6700 B 304700 4000 6700 B 353300 4000 6700 B 399000 4000 6700 B 441700 4000

3-5/8 in. 6100 253200 3400 7400 304700 4100 8600 353300 4800 8900 B 399000 5300 8900 B 441700 5300

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints

3-1/2 SLH90 OD ID

in.

Data 4-3/8 (see below) in.

Torque 2 13 /16 Tension Make-up Torque 2 11 /16 Tension Make-up Torque 2 9 /16 Tension Make-up Torque 2 7 /16 Tension Make-up Torque 2 5 /16 Tension Make-up

14600 B 469400 8800 14600 B 534200 8800 14600 B 596100 8800 14600 B 655000 8800 14600 B 710900 8800

NC40 OD

4-1/2 in.

4-5/8 in.

16200 469400 9700 18300 B 534200 11000 18300 B 596100 11000 18300 B 655000 11000 18300 B 710900 11000

16300 469400 9800 18600 534200 11100 20800 596100 12400 22200 B 655000 13300 22200 B 710900 13300

4-3/4 in. 16400 469400 9800 18700 534200 11100 20900 596100 12400 23000 655000 13700 25000 710900 14900

4-7/8 in. 16500 469400 9800 18800 534200 11100 21000 596100 12400 23100 655000 13700 25100 710900 14900

ID

in.

Data (see below)

Torque 2 15 /16 Tension Make-up Torque 2 13 /16 Tension Make-up Torque 2 11 /16 Tension Make-up Torque 2 9 /16 Tension Make-up Torque 2 7 /16 Tension Make-up

5 in.

20900 643900 11200 20900 B 711600 12400 20900 B 776400 12500 20900 B 838300 12500 20900 B 897200 12500

4 OH OD ID in. 3 1/2

3 3 /8

3 1 /4

3 1/8

3

Data 5-1/4 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

21200 600800 11500 22500 B 681800 13100 22500 B 759900 13500 22500 B 835000 13500 22500 B 907100 13500

5-3/8 in. 21400 600800 11500 24300 681800 13100 27100 B 759900 14700 27100 B 835000 16100 27100 B 907100 16300

in.

Data 5-1/2 (see below) in.

Torque 3 11 /16 Tension Make-up Torque 9 3 /16 Tension Make-up Torque 3 7 /16 Tension Make-up Torque 5 3 /16 Tension Make-up Torque 3 3 /16 Tension Make-up

22200 615100 11900 23800 B 700500 13600 23800 B 783000 14300 23800 B 862500 14300 23800 B 939100 14300

21100 643900 11200 23300 711600 12400 25100 B 776400 13500 25100 B 838300 14600 25100 B 897200 15100

5-1/4 in.

5-3/8 in.

21200 643900 11200 23500 711600 12400 25700 776400 13500 27800 838300 14600 29400 B 897200 15600

21300 643900 11200 23600 711600 12400 25800 776400 13500 27900 838300 14600 29900 897200 15600

5-1/2 in. 21500 643900 11200 23800 711600 12400 26000 776400 13500 28100 838300 14600 30100 897200 15600

4 SH OD 5-1/2 in. 21500 600800 11500 24400 681800 13100 27300 759900 14700 30000 835000 16100 32000 B 907100 17600

5-5/8 in. 21600 600800 11500 24600 681800 13100 27400 759900 14700 30200 835000 16100 32800 907100 17600

5-3/4 in. 21700 600800 11500 24700 681800 13100 27600 759900 14700 30400 835000 16100 33000 907100 17600

ID

in.

Data 4-3/8 (see below) in.

Torque 2 13 /16 Tension Make-up Torque 2 11 /16 Tension Make-up Torque 2 9 /16 Tension Make-up Torque 2 7 /16 Tension Make-up Torque 2 5 /16 Tension Make-up

11200 385400 6000 13000 B 450200 7100 13000 B 512000 7800 13000 B 570900 7800 13000 B 626900 7800

4 WO OD ID

5-1/8 in.

4-1/2 in. 11200 385400 6000 13200 450200 7100 15100 512000 8100 16300 B 570900 9100 16300 B 626900 9800

4-5/8 in. 11300 385400 6000 13300 450200 7100 15200 512000 8100 17000 570900 9100 18700 626900 10000

4-3/4 in. 11400 385400 6000 13400 450200 7100 15300 512000 8100 17100 570900 9100 18800 626900 10000

4-7/8 in. 11500 385400 6000 13500 450200 7100 15400 512000 8100 17200 570900 9100 18900 626900 10000

NC 46 OD

5-5/8 in.

5-3/4 in.

22400 615100 11900 25600 700500 13600 28600 783000 15200 28900 B 862500 16800 28900 B 939100 17300

22500 615100 11900 25700 700500 13600 28800 783000 15200 31800 862500 16800 34100 B 939100 18300

5-7/8 in.

6 in.

22600 615100 11900 25800 700500 13600 29000 783000 15200 32000 862500 16800 34900 939100 18300

22700 615100 11900 26000 700500 13600 29100 783000 15200 32200 862500 16800 35100 939100 18300

ID in. 3 1 /4

3

2 3 /4

2 1/2

2 1 /4

Data (see below)

6 in.

6-1/8 in.

Torque 33600 33800 Tension 901200 901200 Make-up 17600 17600 Torque 39200 39400 Tension 1048400 1048400 Make-up 20500 20500 Torque 44400 44600 Tension 1183900 1183900 Make-up 23200 23200 Torque 45000 B 49400 Tension 1307600 1307600 Make-up 25600 25600 Torque 45000 B 50700 B Tension 1419500 1419500 Make-up 27000 27900

6-1/4 in. 34000 901200 17600 39700 1048400 20500 44900 1183900 23200 49600 1307600 25600 53900 1419500 27900

6-3/8 in.

6-1/2 in.

34200 34400 901200 901200 17600 17600 39900 40100 1048400 1048400 20500 20500 45100 45400 1183900 1183900 23200 23200 49900 50200 1307600 1307600 25600 25600 54200 54500 1419500 1419500 27900 27900

© Grant Prideco. All rights reserved. December 2003

71

G R A N T

P R I D E C O

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints 4-1/2 FH OD ID in. 3 1/2

3 1 /4

3

2 3 /4

2 1/2

Data 5-3/4 (see below) in.

5-7/8 in.

Torque 23300 23400 Tension 669900 669900 Make-up 11900 11900 Torque 29100 29200 Tension 828900 828900 Make-up 14800 14800 Torque 34400 34600 Tension 976200 976200 Make-up 17600 17600 Torque 34800 B 39500 Tension 1111600 1111600 Make-up 20100 20100 Torque 34800 B 40000 B Tension 1235300 1235300 Make-up 20900 22300

4-1/2 H90 OD 6 in.

6-1/8 in.

6-1/4 in.

23600 23700 23800 669900 669900 669900 11900 11900 11900 29400 29600 29700 828900 828900 828900 14800 14800 14800 34800 35000 35200 976200 976200 976200 17600 17600 17600 39700 40000 40200 1111600 1111600 1111600 20100 20100 20100 44300 44500 44800 1235300 1235300 1235300 22300 22300 22300

ID in. 3 3 /4

3 1/2

3 1 /4

3

2 3 /4

Data 5-3/4 (see below) in.

Torque 24700 24900 Tension 608500 608500 Make-up 14300 14300 Torque 31900 32000 Tension 779400 779400 Make-up 18400 18400 Torque 38500 B 38700 Tension 938400 938400 Make-up 22200 22200 Torque 38500 B 44400 B Tension 1085700 1085700 Make-up 23100 25800 Torque 38500 B 44400 B Tension 1221100 1221100 Make-up 23100 26600

4-1/2 OH OD ID in. 4

3 7/8

3 3 /4

3 5 /8

3 1/2

Data 5-5/8 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

19900 531400 10800 23500 624100 12700 26900 B 714000 14600 26900 B 800900 16100 26900 B 884800 16100

5-3/4 in. 20000 531400 10800 23600 624100 12700 27100 714000 14600 30500 800900 16400 32300 B 884800 18200

in. 3 3 /4

3 1/2

3 1 /4

3

2 3 /4

72

Data 6-1/4 (see below) in.

6-3/8 in.

Torque 36700 36900 Tension 846400 846400 Make-up 20900 20900 Torque 44300 44500 Tension 1017200 1017200 Make-up 25300 25300 Torque 51300 51600 Tension 1176300 1176300 Make-up 29300 29300 Torque 54100 B 58100 Tension 1323500 1323500 Make-up 32500 33000 Torque 54100 B 61000 B Tension 1459000 1459000 Make-up 32500 36400

6 in.

6-1/8 in.

6-1/4 in.

25000 25100 25200 608500 608500 608500 14300 14300 14300 32200 32400 32500 779400 779400 779400 18400 18400 18400 38900 39100 39300 938400 938400 938400 22200 22200 22200 45200 45400 45600 1085700 1085700 1085700 25800 25800 25800 50600 B 51100 51400 1221100 1221100 1221100 29000 29000 29000

NC 50 OD 5-7/8 in.

6 in.

6-1/8 in.

20200 531400 10800 23800 624100 12700 27300 714000 14600 30600 800900 16400 33900 884800 18200

20300 531400 10800 23900 624100 12700 27400 714000 14600 30800 800900 16400 34100 884800 18200

20400 531400 10800 24000 624100 12700 27600 714000 14600 31000 800900 16400 34300 884800 18200

ID in. 3 3 /4

3 1/2

3 1 /4

3

2 3 /4

Data 6-1/8 (see below) in.

6-1/4 in.

Torque 37300 37500 Tension 939100 939100 Make-up 19800 19800 Torque 38000 B 44200 B Tension 1109900 1109900 Make-up 22800 23400 Torque 38000 B 44200 B Tension 1269000 1269000 Make-up 22800 26500 Torque 38000 B 44200 B Tension 1416200 1416200 Make-up 22800 26500 Torque 38000 B 44200 B Tension 1551700 1551700 Make-up 22800 26500

5 H90 OD ID

5-7/8 in.

6-3/8 in.

6-1/2 in.

6-5/8 in.

37700 37900 38100 939100 939100 939100 19800 19800 19800 44700 44900 45100 1109900 1109900 1109900 23400 23400 23400 50500 B 51400 B 51700 1269000 1269000 1269000 26800 26800 26800 50500 B 57000 B 57800 1416200 1416200 1416200 30000 30000 30000 50500 B 57000 B 63400 1551700 1551700 1551700 30300 32900 32900

5-1/2 FH OD 6-1/2 in. 37000 846400 20900 44700 1017200 25300 51800 1176300 29300 58400 1323500 33000 64500 1459000 36400

6-5/8 in.

6-3/4 in.

37200 37400 846400 846400 20900 20900 44900 45100 1017200 1017200 25300 25300 52000 52300 1176300 1176300 29300 29300 58700 58900 1323500 1323500 33000 33000 64800 65100 1459000 1459000 36400 36400

© Grant Prideco. All rights reserved. December 2003

ID

Data 6-3/4 in. (see below) in. 4 1 /4

4

3 3 /4

3 1/2

3 1 /4

6-7/8 in.

7 in.

Torque 46800 47000 47200 Tension 1071400 1071400 1071400 Make-up 24600 24600 24600 Torque 47900 B 55300 B 55900 Tension 1265800 1265800 1265800 Make-up 28700 29200 29200 Torque 47900 B 55300 B 62900 B Tension 1448400 1448400 1448400 Make-up 28700 33200 33400 Torque 47900 B 55300 B 62900 B Tension 1619200 1619200 1619200 Make-up 28700 33200 37400 Torque 47900 B 55300 B 62900 B Tension 1778300 1778300 1778300 Make-up 28700 33200 37700

7-1/8 in.

7-1/4 in.

47400 47600 1071400 1071400 24600 24600 56200 56500 1265800 1265800 29200 29200 64400 64700 1448400 1448400 33400 33400 70700 B 72500 1619200 1619200 37400 37400 70700 B 78700 B 1778300 1778300 41200 41200

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints

5-1/2 H90 OD ID in. 4 1/2

4 1 /4

4

3 3 /4

3 1/2

Data 6-3/4 (see below) in. Torque 23200 Tension 514900 Make-up 13200 Torque 32900 Tension 721100 Make-up 18600 Torque 42000 Tension 915400 Make-up 23800 Torque 50600 Tension 1098100 Make-up 28700 Torque 58600 Tension 1268900 Make-up 33200

6-7/8 in. 23300 514900 13200 33000 721100 18600 42200 915400 23800 50800 1098100 28700 58800 1268900 33200

5-1/2 IF OD 7 in.



7-1/8 in.

7-1/4 in.

23400 23500 23600 514900 514900 514900 13200 13200 13200 33200 33300 33500 721100 721100 721100 18600 18600 18600 42400 42600 42700 915400 915400 915400 23800 23800 23800 51000 51200 51500 1098100 1098100 1098100 28700 28700 28700 59100 59400 59600 1268900 1268900 1268900 33200 33200 33200

ID in. 5 1 /4

5

4 3 /4

4 1/2

4 1 /4

Data 7-1/8 (see below) in.

Data 6-3/4 in. (see below) in. 4 1 /4

4

3 3 /4

3 1/2

3 1 /4

6-7/8 in.

7-3/8 in.

7-1/2 in.

7-5/8 in.

Torque 40000 40200 40300 40500 40700 Tension 850900 850900 850900 850900 850900 Make-up 21300 21300 21300 21300 21300 Torque 45200 B 51900 52100 52400 52600 Tension 1092400 1092400 1092400 1092400 1092400 Make-up 27100 27500 27500 27500 27500 Torque 45200 B 53700 B 62300 B 63600 63900 Tension 1322100 1322100 1322100 1322100 1322100 Make-up 27100 32200 33400 33400 33400 Torque 45200 B 53700 B 62300 B 71100 B 74600 Tension 1540000 1540000 1540000 1540000 1540000 Make-up 27100 32200 37400 39000 39000 Torque 45200 B 53700 B 62300 B 71100 B 80200 B Tension 1746200 1746200 1746200 1746200 1746200 Make-up 27100 32200 37400 42700 44300

NC 56 OD ID

7-1/4 in.

6-5/8 FH OD 7 in.

7-1/8 in.

7-1/4 in.

Torque 47300 B 48300 48500 48700 48900 Tension 1124500 1124500 1124500 1124500 1124500 Make-up 24900 24900 24900 24900 24900 Torque 47300 B 54600 B 57100 57400 57700 Tension 1318800 1318800 1318800 1318800 1318800 Make-up 28400 29400 29400 29400 29400 Torque 47300 B 54600 B 62100 B 65500 65800 Tension 1501400 1501400 1501400 1501400 1501400 Make-up 28400 32800 33500 33500 33500 Torque 47300 B 54600 B 62100 B 69800 B 73500 Tension 1672300 1672300 1672300 1672300 1672300 Make-up 28400 32800 37300 37400 37400 Torque 47300 B 54600 B 62100 B 69800 B 77800 B Tension 1831300 1831300 1831300 1831300 1831300 Make-up 28400 32800 37300 41100 41100

ID in. 5 1/2

5 1 /4

5

4 3 /4

4 1/2

Data 7-3/4 (see below) in.

7-7/8 in.

Torque 47700 47900 Tension 953600 953600 Make-up 25100 25100 Torque 60700 60900 Tension 1206900 1206900 Make-up 31900 31900 Torque 68100 B 73400 Tension 1448400 1448400 Make-up 38400 38400 Torque 68100 B 77900 B Tension 1678100 1678100 Make-up 40900 44600 Torque 68100 B 77900 B Tension 1896100 1896100 Make-up 40900 46700

8 in.

8-1/8 in.

8-1/4 in.

48100 48300 953600 953600 25100 25100 61200 61400 1206900 1206900 31900 31900 73700 74000 1448400 1448400 38400 38400 85500 85900 1678100 1678100 44600 44600 87900 B 97200 1896100 1896100 50500 50500

48400 953600 25100 61700 1206900 31900 74300 1448400 38400 86200 1678100 44600 97600 1896100 50500

6-5/8 IF OD ID Data 8-1/4 in. (see below) in. 6 1 /4

6

5 3 /4

5 1/2

5 1 /4

8-3/8 in.

8-1/2 in.

8-5/8 in.

8-3/4 in.

Torque 59300 59500 59700 59900 60100 Tension 1084200 1084200 1084200 1084200 1084200 Make-up 31500 31500 31500 31500 31500 Torque 66200 B 75700 76000 76300 76600 Tension 1372800 1372800 1372800 1372800 1372800 Make-up 39700 40100 40100 40100 40100 Torque 66200 B 77400 B 89000 B 92000 92300 Tension 1649700 1649700 1649700 1649700 1649700 Make-up 39700 46400 48400 48400 48400 Torque 66200 B 77400 B 89000B B 100700 B 107400 Tension 1914800 1914800 1914800 1914800 1914800 Make-up 39700 46400 53400 56300 56300 Torque 66200 B 77400 B 89000 B 100700 B 112700 B Tension 2168100 2168100 2168100 2168100 2168100 Make-up 39700 46400 53400 60400 63800

© Grant Prideco. All rights reserved. December 2003

73

G R A N T

P R I D E C O

HI-TORQUE ® (HT) HT26 OD ID in. 1 3 /4

1 11 /16

1 5 /8

1 9 /16

1 1/2

Data 3-1/8 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

5100 B 313700 3100 5500 B 333900 3300 5800 B 353400 3500 6200 B 372200 3700 6500 B 390300 3900

3-1/4 in. 6900 B 313700 4100 7300 B 333900 4400 7600 B 353400 4600 7900 B 372200 4700 8300 B 390300 5000

HT31 OD 3-3/8 in. 8700 B 313700 5200 9100 B 333900 6400 9500 B 353400 5700 9800 B 372200 5900 10100 B 390300 6100

3-1/2 in. 9800 313700 5900 10700 333900 6400 11400 B 353400 6800 11800 B 372200 7100 12100 B 390300 7300

3-5/8 in. 9900 313700 5900 10700 333900 6400 11600 353400 7000 12400 372200 7400 13100 390300 79000

ID in. 2 1/8

2 1 /16

2

1 15 /16

1 7/8

Data 3-7/8 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

12600 B 447100 7600 13100 B 471800 7900 13600 B 495700 8200 14100 B 518900 8500 14600 B 541400 8800

HT38 OD ID

in. 2 11 /16

2 5 /8

2 9 /16

2 1/2

2 7 /16

Data 4-1/2 (see below) in.

4-5/8 in.

1900 B 618600 11400 19800 B 649200 11900 20600 B 679000 12400 21300 B 708100

22500 B 618600 13500 23300 B 649200 14000 24000 B 679000 14400 24800 B 708100

4-3/4 in.

4-7/8 in.

5 in.

26100 B 618600 16600 26900 B 649200 16100 27700 B 679000 16600 28400 B 708100

27700 618600 16600 29400 649200 17600 31200 679000 18700 32100 B 708100

27800 618600 16700 29600 649200 17800 31300 679000 18800 33000 708100

ID

in.

Data (see below)

5 in.

3 1 /4

3 3 /16

3 1/8

3 1 /16

3

74

Data 5-3/4 (see below) in.

5-7/8 in.

Torque 45500 B 47000 Tension 901200 901200 Make-up 27300 28200 Torque 46600 B 49600 Tension 939100 939100 Make-up 28000 29800 Torque 47800 B 52200 Tension 976300 976300 Make-up 28700 31300 Torque 48900 B 54200 B Tension 1012700 1012700 Make-up 29300 32500 Torque 49900 B 55300 B Tension 1048400 1048400 Make-up 29900 33200

4-1/4 in.

16600 16700 447100 447100 10000 10000 17800 17900 471800 471800 10700 10700 18900 B 19100 495700 495700 11300 11500 19400 B 20200 518900 518900 11600 12100 19900 B 21300 541400 541400 11900 12800

4-3/8 in.

16800 447100 10100 18000 471800 10800 19200 495700 11500 20400 518900 12200 21400 541400 12800

5-1/8 in.

5-1/4 in.

5-3/8 in.

5-1/2 in.

Torque 25800 B 27600 27800 27900 2 15 /16 Tension 643900 643900 643900 643900 Make-up 15500 16600 16700 16700 Torque 26700 B 29700 29900 30000 Tension 678100 678100 678100 678100 2 7/8 Make-up 16000 17800 18000 18000

28000 643900 16800 30100 678100 18100

2 13 /16 Torque Tension Make-up 2 3 / 4 Torque Tension Make-up 2 11 /16 Torque Tension

32200 711600 19300 34200 744400 20500 36200 776400

27700 B 31800 31900 32100 711600 711600 711600 711600 16600 19100 19100 19300 28600 B 32700 B 33900 34100 744400 744400 744400 744400 17200 19600 20300 20500 29400 B 33600 B 35900 36000 776400 776400 776400 776400

HT46 OD ID in.

15100 B 447100 9100 15700 B 471800 9400 16200 B 495700 9700 16700 B 518900 10000 17200 B 541400 10300

4-1/8 in.

HT40 OD

Torque 18200 B 21700 B 25300 B 25900 26000 Tension 587300 587300 587300 587300 587300 Make-up 10900 13000 15200 15500 15600 Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension

4 in.

HT50 OD 6 in.

6-1/8 in.

6-1/4 in.

47200 47400 47600 901200 901200 901200 28300 28400 28600 49800 5000 50200 939100 939100 939100 30000 30000 30100 52400 52600 52800 976300 976300 976300 31400 31600 31700 54900 55100 55300 1012700 1012700 1012700 32900 33100 33200 57300 57500 57700 1048400 1048400 1048400 34400 34500 34600

© Grant Prideco. All rights reserved. December 2003

ID in. 3 3 /4

3 5 /8

3 1/2

3 3 /8

3 1 /4

Data 6-1/8 (see below) in.

6-1/4 in.

Torque 50700 B 52700 Tension 939100 939100 Make-up 30400 31600 Torque 53700 B 59200 Tension 1026000 1026000 Make-up 32200 35500 Torque 56500 B 62700 B Tension 1109900 1109900 Make-up 33900 37600 Torque 59200 B 65300 B Tension 1190900 1190900 Make-up 35500 39200 Torque 61700 B 67900 B Tension 1269000 1269000 Make-up 37000 40700

6-3/8 in.

6-1/2 in.

52900 53100 939100 939100 31700 31900 59400 59700 1026000 1026000 35800 35800 65700 65900 1109900 1109900 39400 39500 71700 B 72000 1190900 1190900 43000 43200 74200 B 77700 1269000 1269000 44500 46600

6-5/8 in. 53300 939100 32000 59900 1026000 35900 66200 1109900 39700 72200 1190900 43300 78000 1269000 46800

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints

HT55 OD ID in. 4 1 /4

4 1/8

4

3 7/8

3 3 /4

Data 6-3/4 (see below) in.

6-7/8 in.

Torque 58900 B 61000 Tension 1071400 1071400 Make-up 35300 36600 Torque 62600 B 69200 Tension 1170100 1170100 Make-up 37600 41500 Torque 66100 B 73500 B Tension 1265800 1265800 Make-up 39700 44100 Torque 69500 B 76900 B Tension 1358600 1358600 Make-up 41700 46100 Torque 72700 B 80100 B Tension 1448400 1448400 Make-up 43600 48100

HT65 OD 7 in.

7-1/8 in.

7-1/4 in.

61300 61500 1071400 1071400 36800 36900 69400 69600 1170100 1170100 41800 41800 77200 77500 1265800 1265800 46300 46500 84500 B 85100 1358600 1358600 50700 51100 87700 B 92400 1448400 1448400 52600 55400

61700 1071400 37000 69900 1170100 41900 77800 1265800 46700 85400 1358600 51200 92700 1448400 55600

ID in. 5 1/8

5

4 7/8

4 3 /4

4 5 /8

Data 7-3/4 (see below) in.

7-7/8 in.

Torque 84700 B 88000 Tension 1329100 1329100 Make-up 50800 52800 Torque 90000 B 99400 Tension 1448400 1448400 Make-up 54000 59600 Torque 95000 B 104800 B Tension 1564800 1564800 Make-up 57000 62900 Torque 99900 B 109600 B Tension 1678100 1678100 Make-up 59900 65800 Torque 104600 B 114300 B Tension 1788600 1788600 Make-up 62800 68600

8 in.

8-1/8 in.

8-1/4 in.

88200 88500 1329100 1329100 52900 53100 99700 10000 1448400 1448400 60000 60000 110700 111100 1564800 1564800 66400 66700 119600 B 121800 1678100 1678100 71800 73100 124300 B 132300 1788600 1788600 74600 79400

88800 1329100 53300 100200 1448400 60100 111400 1564800 66800 122200 1678100 73300 132600 1788600 79600

eXtreme™ Torque (XT) XT24 OD ID in. 1 3 /4

1 5 /8

1 1/2

1 3 /8

1 1 /4

Data 2-7/8 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

5200 B 185000 3100 5900 B 224700 3500 6600 B 261500 4000 7100 B 295400 4300 7700 B 326300 4600

3 in. 6300 185000 3800 7500 B 224700 4500 8100 B 261500 4900 8700 B 295400 5200 9200 B 326300 5500

XT26 OD 3-1/8 in. 6400 185000 3800 8000 224700 4800 9500 261500 5700 10400 B 295400 6200 10900 B 326300 6500

3-1/4 in. 6400 185000 3800 8000 224700 4800 9500 261500 5700 10900 295400 6500 12100 326300 7300

3-3/8 in.

6400 185000 3800 8100 224700 4900 9600 261500 5800 10900 295400 6500 12200 326300 7300

ID in. 2

1 7/8

1 3 /4

1 1/2

1 3 /8

Data (see below) Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

3 in.

4600 B 202500 2800 5500 B 248200 3300 6300 B 290900 3800 6600 B 261500 4000 7100 B 295400 4300

XT31 OD ID in. 2 3 /8

2 1 /4

2 1/8

2

1 7/8

Data 3-3/4 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

11700 B 309100 7000 12900 B 363600 7700 14100 B 415100 8500 15200 B 463700 9100 16200 B 509400 9700

3-7/8 in. 13100 309100 7900 15500 B 363600 9300 16600 B 415100 10000 17700 B 463700 10600 18700 B 509400 11200

3-1/8 in. 6300 B 202500 3800 7200 B 248200 4300 8000 B 290900 4800 8100 B 261500 4900 8700 B 295400 5200

3-1/4 in.

3-3/8 in.

7500 7600 202500 202500 4500 4600 9000 B 9600 248200 248200 5800 5800 9900 B 11500 290900 290900 5900 6900 9500 B 9500 261500 261500 5700 5700 10400 B 10900 295400 295400 6200 6500

3-1/2 in.

7600 202500 4600 9600 248200 5800 11500 290900 6900 9600 261500 5800 10900 295400 6500

XT38 OD 4 in. 13200 309100 7900 16000 363600 9700 18600 415100 11200 20400 B 463700 12200 21400 B 509400 12800

4-1/8 in. 13300 309100 8000 16100 363600 9700 18700 415100 11200 21100 463700 12700 23400 509400 14000

4-1/4 in.

13300 309100 8000 16100 363600 9700 18800 415100 11300 21200 463700 12700 23500 509400 14100

ID

in.

Data 4-1/2 (see below) in.

Torque 2 13 /16 Tension Make-up Torque 2 11 /16 Tension Make-up Torque 2 9 /16 Tension Make-up Torque 2 7 /16 Tension Make-up Torque 2 5 ­/16 Tension Make-up

22100 B 473000 13300 23800 B 537800 14300 25400 B 599600 15200 27000 B 658500 16200 28400 B 714500 17000

4-5/8 in. 23800 473000 14300 27300 B 537800 16400 29000 B 599600 17400 30500 B 658500 18300 31900 B 714500 19100

4-3/4 in.

4-7/8 in.

23900 24000 473000 473000 14300 14400 27700 27800 537800 537800 16700 16700 31300 31500 599600 599600 18800 18900 34200 B 34900 658500 658500 20500 20900 35600 B 38200 714500 714500 21400 22900

5 in.

24100 473000 14500 27900 537800 16700 31600 599600 19000 35100 658500 21100 38300 714500 23000

© Grant Prideco. All rights reserved. December 2003

75

G R A N T

P R I D E C O

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints XT39 OD ID

in. 2 7/8

2 13 /16

2 3 /4

2 11 /16

2 5 /8

Data 4-5/8 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

24900 B 569500 14900 25800 B 603000 15500 26700 B 635800 16000 27600 B 667800 16600 28500 B 699100 17100

4-3/4 in. 28700 B 569500 17200 29600 B 603000 17800 30500 B 635800 18300 31400 B 667800 18800 32200 B 699100 19300

XT40 OD 4-7/8 in. 30900 569500 18500 32900 603000 19900 34400 B 635800 20600 35300 B 667800 21200 36200 B 699100 21700

5 in. 31000 569500 18600 33100 603000 19900 35100 635800 21100 37000 667800 22200 38900 699100 23300

5-1/8 in.

31100 569500 18700 33200 603000 19900 35200 635800 21100 37200 667800 22300 39100 699100 23500

ID in. 3

2 15 /16

2 7/8

2 13 /16

2 3 /4

Data 4-7/8 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

30300 B 648900 18200 31400 B 683900 18800 32300 B 718100 19400 33300 B 751600 20000 34200 B 784400 20500

XT46 OD ID in. 3 1/2

3 7 /16

3 3 /8

3 5 /16

3 1 /4

Data 5-3/4 (see below) in.

5-7/8 in.

Torque 48100 B 53700 B Tension 910300 910300 Make-up 28900 32200 Torque 49500 B 55100 B Tension 951200 951200 Make-up 29700 33100 Torque 50800 B 56400 B Tension 991300 991300 Make-up 30500 33800 Torque 52100 B 57700 B Tension 1030700 1030700 Make-up 31300 34600 Torque 53300 B 59000 B Tension 1069300 1069300 Make-up 32000 35400

5 in. 34500 B 648900 20700 35500 B 683900 21300 36500 B 718100 21900 37500 B 751600 22500 38400 B 784400 23000

5-1/8 in.

5-1/4 in.

37200 37400 648900 648900 22300 24400 39500 39600 683900 683900 23800 23800 40800 B 41800 718100 718100 24500 25100 41800 B 44000 751600 751600 25100 26400 42700 B 46100 784400 784400 25600 27700

5-3/8 in.

37500 648900 22500 39800 683900 23900 42000 718100 25200 44100 751600 26500 46200 784400 27700

XT50 OD 6 in.

6-1/8 in.

58100 58300 910300 910300 34900 35000 60900 B 61300 951200 951200 36800 36800 62300 B 64300 991300 991300 37400 38600 63500 B 67200 1030700 1030700 38100 40300 64800 B 70000 1069300 1069300 38900 42000

6-1/4 in.

58500 910300 35100 61500 951200 36900 64500 991300 38700 67400 1030700 40400 70200 1069300 42100

ID in. 3 3 /4

3 11 /16

3 5 /8

3 9 /16

3 1/2

Data 6-1/8 (see below) in.

6-1/4 in.

Torque 62200 B 68600 B Tension 1085500 1085500 Make-up 37300 41200 Torque 63800 B 70200 B Tension 1129300 1129300 Make-up 38300 42100 Torque 65300 B 71700 B Tension 1172400 1172400 Make-up 39200 43000 Torque 66800 B 73200 B Tension 1214700 1214700 Make-up 40100 43900 Torque 68200 B 74600 B Tension 1256300 1256300 Make-up 40900 44800

6-3/8 in.

6-1/2 in.

6-5/8 in.

75200 B 77000 77300 1085500 1085500 1085500 45100 46200 46400 76800 B 80500 80700 1129300 1129300 1129300 48300 48300 48400 78300 B 83900 841000 1172400 1172400 1172400 47000 50300 50500 79800 B 86600 B 87400 1214700 1214700 1214700 47900 52000 52400 81200 B 88000 B 90700 1256300 1256300 1256300 48700 52800 54400

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

76

© Grant Prideco. All rights reserved. December 2003

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints

ID

in. 4 1 /4

4 3 /16

4 1/8

4 1 /16

4

XT54 OD Data 6-3/8 (see below) in.

6-1/2 in.

Torque 61700 B 68700 B Tension 960700 960700 Make-up 37000 41200 Torque 63600 B 70600 B Tension 1010400 1010400 Make-up 38200 42400 Torque 65500 B 72400 B Tension 1059400 1059400 Make-up 39300 43400 Torque 67300 B 74300 B Tension 1107600 1107600 Make-up 40400 44600 Torque 69100 B 76100 B Tension 1155100 1155100 Make-up 41500 45700

XT57 OD 6-5/8 in.

6-3/4 in.

70200 70400 960700 960700 42100 42200 74400 74600 1010400 1010400 44800 44800 78500 78700 1059400 1059400 47100 47200 81400 B 82700 1107600 1107600 48800 49600 83200 B 86600 1155100 1155100 49900 52000

6-7/8 in.

70600 960700 42400 74800 1010400 44900 78900 1059400 47300 82900 1107600 49700 86800 1155100 52100

ID in. 4 3 /8

4 5 /16

4 1 /4

4 3 /16

4 1/8

4

Data 6-3/4 (see below) in.

Torque 79100 B 85300 Tension 1107100 1107100 Make-up 47500 51200 Torque 81100 B 88800 B Tension 1158300 1158300 Make-up 48700 53300 Torque 83100 B 90800 B Tension 1208700 1208700 Make-up 49900 54500 Torque 85000 B 92700 B Tension 1258400 1258400 Make-up 51000 55600 Torque 86900 B 94600 B Tension 1307400 1307400 Make-up 52100 56800 Torque 90600 B 98300 B Tension 1403100 1403100 Make-up 54400 59000

XT65 OD ID in. 5 1/8

5 1 /16

5

4 15 /16

4 7/8

Data 7-3/4 (see below) in.

7-7/8 in.

Torque 116100 B 123300 Tension 1424400 1424400 Make-up 69700 74000 Torque 118800 B 128800 B Tension 1484400 1484400 Make-up 71300 77300 Torque 121500 B 131500 B Tension 1543700 1543700 Make-up 72900 78900 Torque 124100 B 134100 B Tension 1602200 1602200 Make-up 74500 80500 Torque 126700 B 136700 B Tension 1660000 1660000 Make-up 76000 82000

6-7/8 in.

7 in.

7-1/8 in.

7-1/4 in.

85600 85800 1107100 1107100 54100 51500 90000 90200 1158300 1158300 54100 54100 94300 94600 1208700 1208700 56600 56800 98600 98900 1258400 1258400 59200 59300 102500 B 103100 1307400 1307400 61500 61900 106200 B 111300 1403100 1403100 63700 66800

86000 1107100 51600 90500 1158300 54300 94800 1208700 56900 99100 1258400 59500 103400 1307400 62000 111600 1403100 67000

XT69 OD 8 in. 123600 1424400 74200 129500 1484400 77900 135300 1543700 81200 141100 1602200 84700 146800 1660000 88100

8-1/8 in.

8-1/4 in.

123900 1424400 74300 129800 1484400 77900 135700 1543700 81400 141400 1602200 84800 147100 1660000 88300

124200 1424400 74500 130100 1484400 78100 136000 1543700 81600 141800 1602200 85100 147400 1660000 88400

ID in. 5 1 / 2

5 7 /16

5 3 /8

5 5 /16

5 1 /4

Data (see below)

8 in.

8-1/8 in.

Torque 120400 B 131200 B Tension 1516800 1516800 Make-up 72200 78700 Torque 123500 B 134300 B Tension 1581300 1581300 Make-up 74100 80600 Torque 126500 B 137300 B Tension 1644900 1644900 Make-up 75900 82400 Torque 129500 B 140300 B Tension 1707900 1707900 Make-up 77700 84200 Torque 132500 B 143300 B Tension 1770100 1770100 Make-up 79500 86000

8-1/4 in.

8-3/8 in.

8-1/2 in.

140200 140500 140800 1516800 1516800 1516800 84100 84300 84500 145300 B 147200 147600 1581300 1581300 1581300 88300 88300 88600 148400 B 153900 154200 1644900 1644900 1644900 89000 92300 92500 151400 B 160400 160700 1707900 1707900 1707900 90800 96200 96400 154300 B 165600 B 167200 1770100 1770100 1770100 92600 99400 100300

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

77

G R A N T

P R I D E C O

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints Grant Prideco Double Shoulder (GPDS) GPDS26 OD ID in. 1 3 /4

1 11 /16

1 5 /8

1 9 /16

1 1/2

Data 3-1/4 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

6000 B 313700 3600 6400 B 333900 3800 6700 B 353400 4000 7100 B 372200 4300 7400 B 390300 4400

3-3/8 in. 7800 B 313700 4700 8200 B 333900 4900 8600 B 353400 5200 8900 B 372200 5300 9200 B 390300 5500

GPDS31 OD 3-1/2 in. 8800 313700 5300 9700 333900 5800 10500 353400 6300 10900 B 372200 6500 11200 B 390300 6700

3-5/8 in. 8900 313700 5300 9700 333900 5800 10600 353400 6400 11300 372200 6800 12100 390300 7300

3-3/4 in.

8900 313700 5300 9800 333900 5900 10600 353400 6400 11400 372200 6800 12200 390300 7300

ID in.

Data 3-7/8 (see below) in.

Torque 2 1 / 8 Tension Make-up Torque 2 1 /16 Tension Make-up Torque Tension 2 Make-up Torque 1 15 /16 Tension Make-up Torque Tension 1 7/8 Make-up

10900 B 447100 6500 11500 B 471800 6900 12000 B 495700 7200 12500 B 518900 7500 12900 B 541400 7700

GPDS38 OD ID

in. 2 9 /16

2 1/2

2 7 /16

2 3 /8

2 5 /16

Data 4-5/8 (see below) in. Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up Torque Tension Make-up

19800 B 649200 11900 20500 B 679000 12300 21300 B 708100 12800 22000 B 736400 13200 22600 B 764000 13600

4-3/4 in. 23400 B 649200 14000 24100 B 679000 14500 24800 B 708100 14900 25500 B 736400 15300 26200 B 764000 15700

4 in. 13500 B 447100 8100 14000 B 471800 8400 14600 B 495700 8800 15000 B 518900 9000 15500 B 541400 9300

4-1/8 in.

4-1/4 in.

4-3/8 in.

14800 14900 447100 447100 8900 8900 16000 16100 471800 471800 9700 9700 17200 17300 495700 495700 10300 10400 17700 B 18400 518900 518900 10600 11000 18200 B 19500 B 541400 541400 10900 11700

15000 447100 9000 16200 471800 9700 17400 495700 10400 18500 518900 11100 19600 541400 11800

GPDS40 OD 4-7/8 in. 25700 649200 15400 27400 679000 16500 28600 B 708100 17200 29300 B 736400 17600 29900 B 764000 17900

5 in. 25800 649200 15500 27500 679000 16500 29200 708100 17500 30800 736400 18500 32300 764000 19400

5-1/8 in.

25900 649200 15500 27700 679000 16600 29300 708100 17600 30900 736400 18500 32500 764000 19500

ID

in.

Data (see below)

Torque 2 3 / 4 Tension Make-up Torque 2 11 /16 Tension Make-up Torque 2 5 / 8 Tension Make-up Torque 2 9 /16 Tension Make-up Torque 2 1 / 2 Tension Make-up

5 in.

25700 B 744400 15400 26500 B 776400 15900 27300 B 807700 16400 28100 B 838300 16900 28900 B 868100 17300

5-1/8 in. 29800 B 744400 17900 30600 B 776400 18400 31500 B 807700 18900 32300 B 838300 19400 33000 B 868100 19800

5-1/4 in.

5-3/8 in.

30800 30900 744400 744400 18500 18500 32700 32900 776400 776400 19700 19700 34600 34800 807700 807700 20800 20900 36400 36600 838300 838300 21800 22000 37300 B 38400 868100 868100 22400 23000

5-1/2 in.

31100 744400 18700 33000 776400 19800 34900 807700 20900 36800 838300 22100 38600 868100 23200

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended.

78

© Grant Prideco. All rights reserved. December 2003

Torsional Strength, Tensile Strength, and Make-up Torque Values for Tool Joints

GPDS46 OD ID in. 3 5 /16

3 1 /4

3 3 /16

3 1/8

3 1 /16

Data 5-3/4 (see below) in.

5-7/8 in.

Torque 39900 40100 Tension 862500 862500 Make-up 23900 24100 Torque 41500 B 42700 Tension 901200 901200 Make-up 24900 25600 Torque 42600 B 45300 Tension 939100 939100 Make-up 25600 27200 Torque 43700 B 47800 Tension 976300 976300 Make-up 26200 28700 Torque 44800 B 50200 B Tension 1012700 1012700 Make-up 26900 30100

GPDS50 OD 6 in. 40200 862500 24100 42900 901200 25900 45500 939100 27300 48000 976300 28800 50500 1012700 30300

6-1/8 in. 40400 862500 24200 43100 901200 25900 45700 939100 27400 48200 976300 28900 50700 1012700 30400

6-1/4 in.

40600 862500 24400 43300 901200 26000 45900 939100 27500 48400 976300 29000 50900 1012700 30500

ID in.

Data 6-1/8 (see below) in.

Torque 45400 B 47100 3 3 / 4 Tension 939400 939400 Make-up 27200 28300 Torque 48300 B 53500 3 5 / 8 Tension 1026300 1026300 Make-up 29000 32100 Torque 51100 B 57200 B 3 1 / 2 Tension 1110200 1110200 Make-up 30700 34300 Torque 53800 B 59900 B 3 3 / 8 Tension 1191200 1191200 Make-up 32300 35900 Torque 56300 B 62400 B 3 1 /4 Tension 1269200 1269200 Make-up 33800 37400

GPDS55 OD ID in. 4 1/8

4

3 7/8

3 3 /4

3 5 /8

Data 6-3/4 (see below) in.

6-7/8 in.

Torque 58700 B 66100 Tension 1196700 1196700 Make-up 35200 39700 Torque 62300 B 69700 B Tension 1292500 1292500 Make-up 37400 41800 Torque 65700 B 73000 B Tension 1385200 1385200 Make-up 39400 43800 Torque 68900 B 76300 B Tension 1475100 1475100 Make-up 41300 45800 Torque 72000 B 79400 B Tension 1561900 1561900 Make-up 43200 47600

6-1/4 in.

6-3/8 in.

6-1/2 in.

47300 47500 939400 939400 28400 28500 53700 54000 1026300 1026300 32400 32400 60000 60200 1110200 1110200 36000 36100 65900 66200 1191200 1191200 39500 39700 68700 B 71900 1269200 1269200 41200 43100

6-5/8 in. 47600 939400 28600 54200 1026300 32500 60400 1110200 36200 66400 1191200 39800 72200 1269200 43300

GPDS65 OD 7 in.

7-1/8 in.

66300 66600 1196700 1196700 39800 40000 74200 74400 1292500 1292500 44600 44600 80600 B 82000 1385200 1385200 48400 49200 83900 B 89300 1475100 1475100 50300 53600 86900 B 94700 B 1561900 1561900 52100 56800

7-1/4 in. 66800 1196700 40100 74700 1292500 44800 82300 1385200 49400 89600 1475100 53800 96600 1561900 58000

ID in. 5

4 15 /16

4 7/8

4 13 /16

4 3 /4

Data 7-3/4 (see below) in.

7-7/8 in.

Torque 85700 B 95400 B Tension 1480100 1480100 Make-up 51400 57200 Torque 88200 B 98000 B Tension 1538600 1538600 Make-up 52900 58800 Torque 90700 B 100500 B Tension 1596400 1596400 Make-up 54400 60300 Torque 93200 B 102900 B Tension 1653500 1653500 Make-up 55900 61700 Torque 95600 B 105300 B Tension 1709800 1709800 Make-up 57400 63200

8 in.

8-1/8 in.

8-1/4 in.

96500 96800 1480100 1480100 57900 58100 102000 102400 1538600 1538600 61400 61400 107500 107900 1596400 1596400 64500 64700 112900 B 113300 1653500 1653500 67700 68000 115300 B 118600 1709800 1709800 69200 71200

97100 1480100 58300 102700 1538600 61600 108200 1596400 64900 113600 1653500 68200 119000 1709800 71400

Notes: 1. Table data based on 120ksi minimum tool joint yield strength 2. Box-weak connections shown in bold type

While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. © Grant Prideco. All rights reserved. December 2003

79