Goulds_3171_Bulletin.pdf

Goulds Pumps

Goulds 3171 / CV3171 Vertical Sump and Process Pumps

Goulds 3171

Goulds Model 3171 Vertical Sump and Process Pumps Designed for the Total Range of Industry Services N N N N

Capacities to 3180 GPM (722 m3/h) Heads to 344 feet (105 m) Temperatures to 450° F (232° C) Pit Depths to 20 feet (6 m)

Design Features N N N N N N N

Self-Priming Rugged Double Row Thrust Bearing Heavy Duty One-piece Shaft External Impeller Adjustment Available in a Wide Range of Alloys Open Impeller Design Vapor Proof Option: Choice of packing, or mechanical seal for containing sump vapors

Services N N N N N

The “Veteran” vertical sump and process pump. Thousands of installations—industrial process, sump drainage, corrosive liquids, pollution control, molten salts—attest to the 3171’s remarkable performance. Simple mounting. 2

Industrial Process Industrial Sump Wastes Molten Sulfur Tank Unloading Corrosive and Non-Corrosive Liquids

Goulds 3171

Model 3171 Vertical Sump and Process Pumps Heavy Duty Design Features for a Wide Range of Services LABYRINTH BEARING SEAL Prevents premature bearing failure due to lubricant contamination.

C-FACE MOTOR MOUNTING Accommodates readily available C-face motors. Also available for P-base and IEC motors. CONTINUOUS HIGH PERFORMANCE Original high efficiency maintained by simple external adjustment resulting in long-term energy savings. DOUBLE ROW THRUST BEARING Grease lubricated—carries pump thrust load; sealed for outdoor installation. DISCHARGE LOCKED TO PUMP SUPPORT PLATE FOR STRENGTH

OPTIONAL UPPER STUFFING BOX

HEAVY COLUMN PIPE Provides rigid support for pump and bearings.

LINESHAFT STEADY BEARING Self-lubricating carbon/graphite bearing furnished as standard— best for handling water, corrosives, solvents and high temperature liquids. RESTRICTOR BUSHING Close running bushing to prevent pressure loss from casing.

ANY MOUNTING REQUIREMENTS Met by support plate and optional pit cover. Float switches, alternators and other control devices can be easily mounted.

STEADY BEARING HOUSING Precision machined register fit of column, bearing housing and casing assures positive bearing and shaft alignment. Completely interchangeable with all lineshaft bearing options.

HEAVY DUTY ONE-PIECE SHAFT With closely spaced steady bearings assures long life and low maintenance.

HEAVY DUTY CASING Provides rigid support for shaft–closer to impeller load–resulting in longer steady bearing life.

FULLY OPEN IMPELLER WITH BACK PUMP-OUT VANES Acknowledged best design for process services—solids handling, stringy material, corrosives, abrasives.

REMOVABLE SUCTION COVER Replaceable wear part for low operational costs.

3

Goulds 3171

Optional Features for Application Flexibility Goulds offers a variety of options to meet users’ specific plant and application requirements. Your Goulds representative will be glad to recommend the features

best suited to your particular service conditions to assure safe, efficient and reliable operation.

Molten Sulfur Pumps

Abrasive Liquids

• Jacketed column and discharge pipes (tested to 150 PSIG [1034 kPa])

Goulds sealed bearing arrangement is recommended for applications where abrasive solids are in the pumpage and no clean flush is available. A carbon bearing and lip seal is used for sealing the bearing housing. Spring loaded grease cup is provided.

• Available in all principal alloys • One-piece, self-lubricating, graphite impregnated steady bearing • Vapor-proof construction to seal sump vapors

JACKETED COLUMN

JACKETED DISCHARGE PIPE

• Balanced, low NPSH, semi-open impeller for optimum performance

SEALED BEARING ARRANGEMENT

• Multiple intermediate bearings permit overall settings to 20 feet (6 m)

Optional Bearings

Mounting Systems

Goulds offers the best choice of steady bearings to meet service requirements...optional fluted rubber with rigid shell, bronze, and (standard) carbon.

Goulds can provide optional mounting systems to meet specific user requirements including pit covers fabricated with float control mounting points, man holes for access, vapor-proof designs, and lube line holes.

Float Controls The widest range of float controls is offered to suit the individual requirements of every installation. Ask your Goulds representative for a complete list of options.

Other Options • Complete line • of controls and • starters • Enclosed • lineshaft • Other types of • float controls • ANSI tank • mounting • Flanged • discharge • connections

BALL-OPERATED FLOAT SWITCH 4

DISPLACER TYPE LIQUID LEVEL SWITCH

PIPE-MOUNTED, DIRECT ACTING FLOAT SWITCH

Goulds 3171

3171 Hydraulic Coverage CAPACITY— 2850 RPM (50 Hz)

m 125

TOTAL HEAD—3500 RPM (60 Hz)

100

10 500

20

GPM

30

40

15

20

30

50

50 60 70 80 90100

80

200

300

120 150 400 500 600

800 300 FT. 200

400 FT. 300

80 60

10

6

1x11/2 -8

200

40

40

100

1x11/2 -6

100

60

20 15

11/2 x3-6

60

40

1x1-5

15

30

80

80 20

60

21/2 x3-8 11/2 x2-8

30

m 80

10

40

Group ST Group S Group MT

10

20 5

20 5 0

TOTAL HEAD—2850 RPM (50 Hz)

m3 /h 3

10 0 10

20

GPM 3 m /h 3

30

40

6

50 60 70 80

10

15

100

200

20

30

300

50

400 500 600 80

800 1000

120 150

200

CAPACITY— 3500 RPM (60 Hz)

CAPACITY—1450 RPM (50 Hz)

10 60

6

GPM

20

10

30

15

40 50 60

20

30

50

80 100

200

80

120 150 200

300 400

300 400

600 8001000

600 800

2000

200

3000 4000 FT.

50

150

m

FT.

TOTAL HEAD—1750 RPM (60 Hz)

m

175

21/2 x3-13

50

Group ST Group S Group M Group L

150 3x4-13

11/2 x3-13 40

4x6-13

125

100

6x8-13 30

40 125

30

100 21/2 x 3-11

11/2 x2-11 75 20

3x4-11

4x6-11H

75

8x10-11

20 50

1x11/2 -8 50 21/2 x3-8

10

25

25

1x11/2 -6

1x1-5 0

10

4x4-8

11/2X3-6

TOTAL HEAD—1450 RPM (50 Hz)

m3 /h 3

11/2 x2-8

0 10 GPM m3 /h 3

20

30 6

40 50 60 10

15

80 100 20

200 30

50

300 400 80

600 800 1000 120 150 200

2000 300 400

3000

5000

600 800 1000

CAPACITY—1750 RPM (60 Hz)

5

Goulds 3171

3171 Hydraulic Coverage CAPACITY— 950 RPM (50 Hz)

m3 /h 3 10

25

80

TOTAL HEAD—1150 RPM (60 Hz)

20

GPM

10 30

15

40 50 60

20

30

50

80 100

200

80

120 150 200

300 400

300 400

600 800 1000

2000 80 70

Group S Group M Group L

20 60

70 11/2 x 3-13

20

21/2 x 3 -13

60 15

3x4-13

50

4x6-13

50 3x4-11

40

21/2 x3 -11

4x6-11H

30

8x10-11

10

30 1x11/2 -8

21/2 x 3 -8

11/2 x2-8

20

20

4x4-8

5

5

10

10 0

15

40

6x8-13

11/2 x2-11 10

m

FT.

TOTAL HEAD—950 RPM (50 Hz)

m

100 FT. 90

30

6

0 10 GPM m3 /h 3

20

30 6

40 50 60 10

15

80 100 20

200 30

50

300 400 80

600 800 1000 120 150 200

2000 300 400

3000 200

CAPACITY—1150 RPM (60 Hz)

Maximum Sealing Flexibility Vapor-Proof Construction Optional upper stuffing box allows use of wide range of sealing arrangements to meet specific user requirements for sealing toxic, hazardous, noxious or corrosive fumes. With this option, the discharge pipe and all fittings are sealed at the support plate.

6

Your Goulds representative will gladly recommend the best sealing solution for your service, some of which are illustrated here.

PACKED BOX Standard vaporproof sealing option. Includes packing, lantern ring and grease lubricator (not illustrated).

DOUBLE CARTRIDGE SEAL Available in wet or dry versions to control emissions.

DRY RUNNING SEAL Dry running, non-contacting cartridge gas seal. Pressurized air barrier between seal faces prevents vapor leakage.

SINGLE OUTSIDE SEAL Mechanical seal with oil lubricator and sight glass. Outside mount has no metal parts in contact with vapors.

Goulds 3171

Dimensions Model 3171 All dimensions in inches and (mm). Not to be used for construction.

DIMENSIONS ST

S

L

3x4-13

4x6-13 11/2x2-8 11/2x2-11 21/2x3-8

6x8-13

6x8-13

8x10-11

8x10-11

A

3.6 (92)

3.6 (92)

3.6 (92)

3.6 (92)

3.6 (92)

4 (102)

4 (102)

4 (102)

4.5 (114)

4.5 (114)

4.5 (114)

4.5 (114)

4.5 (114)

4.5 (114)

4 (102)

4 (102)

4.5 (114)

10.4 (264)

10.4 (264)

10.4 (264)

10.4 (264)

B

1.5 (38)

2 (51)

3 (76)

2 (51)

2 (51)

3 (76)

4 (102)

2 (51)

3 (76)

4 (102)

4 (102)

3 (76)

3 (76)

4 (102)

4 (102)

3 (76)

3 (76)

4 (102)

6 (152)

8 (203)

8 (203)

10 (254)

E

8.1 (205)

8.4 (213)

9.2 (232)

10.1 (256)

9.6 (244)

10.3 (262)

12.1 (306)

11.4 (289)

12.1 (306)

12.8 (325)

14.3 (362)

13.6 (346)

13.2 (335)

13.8 (351)

14.8 (375)

11.4 (289)

12.37 (314)

13.6 (346)

21.5 (546)

21.5 (546)

24.3 (616)

24.3 (616)

G

22 (559)

22 (559)

22 (559)

22 (559)

22 (559)

22 (559)

26.5 (673)

26.5 (673)

26.5 (673)

31 (787)

31 (787)

31 (787)

31 (787)

31 (787)

31 (787)

26.5 (673)

31 (787)

31 (787)

—

—

—

—

R

6 (152)

5.8 (148)

5.3 (132)

4.3 (108)

4.4 (111)

3.8 (97)

3.3 (84)

4.6 (116)

4.2 (106)

4 (102)

3.7 (94)

4.8 (121)

4.7 (119)

4.3 (109)

3.7 (94)

4.4 (111)

4.56 (116)

3.8 (97)

6.9 (174)

6.9 (174)

5.3 (133)

5.3 (133)

14.3 Q* (362)

15.3 (387)

16.8 (425)

17 (432)

17 (432)

18.5 (467)

22.5 (572)

20.5 (521)

22.5 (572)

24 (610)

26.5 (673)

25 (635)

25 (635)

25.5 (648)

27.5 (699)

20 (508)

22 (559)

22.8 (578)

38.5 (978)

39.5 (1003)

42.5 (1080)

43.5 (1105)

4x4-8

11/2x2-11 21/2x3-11 3x4-11 4x6-11H 11/2x3-13 21/2x3-13

MT

3.6 (92)

1x1-5

1x11/2-6 11/2x3-6 1x11/2-8 11/2x2-8 21/2x3-8

M

*Add 3 in. (76) for float mounted option.

7

Goulds 3171

Sectional View Model 3171

240 332A 221

134

136

107 105 106

242

189 Optional Upper Stuffing Box 122 195 192 213 123 190

155 199 197

Designed to Meet (or Exceed) Today’s Tough Environmental Requirements Installed in 1988 on hydrocarbon waste sump service, this 3171 was easily retrofitted with vapor-proof construction including a ferrofluidic seal (see page 7) to meet tougher EPA emission requirements. Readings were less than 30 ppm—exceeding EPA requirements 8

100

178

198

182

101

315

351

187

Goulds 3171

3171 Parts List and Materials of Construction Material Item Number

Cast Iron

Part Name

100

Casing

101

Impeller

105

Upper Stuffing Box Lantern Ring

106

Upper Stuffing Box Packing

107

Upper Stuffing Box Gland

112

Ball Bearing

122

Pump Shaft

123

Deflector

Bronze Fitted

Carbon Steel

316SS

Alloy 20

Hastelloy B&C

Steel

316SS

Alloy 20

Hastelloy

Bronze

Steel

316SS

Alloy 20

Hastelloy

Alloy 20

Hastelloy

Alloy 20

Hastelloy

Cast Iron Ductile Iron

Teflon Acrylic Graphite 316SS Double Row Angular Contact Steel

316SS EPDM

134

Bearing Shell

136

Bearing Locknut

Cast Iron

178

Impeller Key

155

Restrictor Bushing

182

Suction Cover

Cast Iron

187

Strainer

Cast Iron

316SS

189

Pump Support Plate

190

Lubrication or Flush Pipe

Steel

316SS

192

Head Column

Steel

316SS

195

Discharge Pipe

Steel

316SS

197

Steady Bearings

198

Impeller Screw

199

Impeller Washer

213

Steady Bearing Housing

221

Upper Stuffing Box (When Used)

240

Motor Support

242

Pipe Collar (Discharge Pipe)

Steel

316SS

Alloy 20

Hastelloy

306

Column Extension

Steel

316SS

Alloy 20

Hastelloy

316SS

Alloy 20

Hastelloy

Alloy 20

Hastelloy

Steel 316SS Carbon-Filled Teflon ® Steel

316SS

Alloy 20

Hastelloy

Alloy 20

Hastelloy

Alloy 20

Hastelloy

Alloy 20

Hastelloy

Alloy 20

Hastelloy

316SS

Alloy 20

Hastelloy

316SS

Alloy 20

Hastelloy

Alloy 20

Hastelloy

Steel

Carbon

Cast Iron

316SS Cast Iron Cast Iron

315

Discharge Elbow

332A

Labyrinth Seal

Cast Iron

351

Gasket—Suction Cover to Casing

369

Retaining Ring—Steady Bearing

Steel

Carbon-Filled Teflon ® with Viton O-ring Nitrile Acrylic Stainless

Construction Details All dimensions in inches and (mm). ST

Pump

S

275 (125)

280 (127)

295 (134)

305 (139)

315 (143)

325 (148)

390 (177)

385 (175)

425 (193)

540 (245)

590 (268)

535 (243)

550 (250)

570 (259)

600 (273)

325 (148)

385 (175)

335 (152)

830 (377)

910 (414)

Weight—Add to Each 6” of Length Lb (kg)*

13 (6)

14 (6)

15 (7)

14 (6)

14 (6)

15 (7)

17 (8)

14 (6)

15 (7)

20 (9)

20 (9)

19 (9)

19 (9)

20 (9)

20 (9)

14 (6)

15 (7)

15 (7)

35 (16)

40 (18)

0.188 (5)

0.250 (6)

0.500 (13)

0.281 (7)

0.281 (7)

0.938 (24)

0.938 (24)

0.344 (9)

0.594 (15)

0.594 (15)

1.125 (29)

0.250 (6)

0.594 (15)

0.594 (15)

0.594 (15)

0.281 (7)

0.344 (9)

0.938 (24)

0.594 (15)

1.188 (30)

0.6875

1x11/2-8

11/2x2-8

21/2x3-8

4x4-8

(17)

Shaft

3x4-11 4x6-11H

11/2x3-13 21/2x3-13

Tapered 1.1118 (28) Large End

3x4-13 4x6-13

Tapered 1.585 (40) Large End

11/2x2-8

11/2x2-11 21/2x3-8

6x8-13 8x10-11

Tapered 2.222 (56) Large End

Diameter at Coupling End

0.875

(22)

1.375

(35)

1.875

(48)

Diameter at Steady Bearing

1.125

(29)

1.625

(41)

2.25

(57)

Ball Bearing Steady Bearing (Sleeve Type) Maximum Total Working Pressure—Casing General

11/2x2-11 21/2x3-11

L

1x1-5

Diameter at Impeller

11/2x3-6

MT

Weight (2 Foot Depth) Less Motor Lb (kg)*

Maximum Diameter of Solids

Bearings

M

1x11/2-6

5305 or Equal

5308 or Equal

5311 or Equal

1.125 I.D. x 1.625 O.D. (29x41)

1.625 I.D. x 2.125 O.D. (41x54)

2.25 I.D. x 3.0 O.D. (57x75)

150 PSI

(1034 kPa)

Max. Liquid Temp.— Without Upper Stuffing Box

210° F

(99° C)

Max. Liquid Temperature— Upper Stuffing Box

450° F

(232° C)

*L Group Pump Weights are based on a 3 ft (.9m) Setting

9

Goulds CV 3171

Goulds Model CV 3171 Vertical Sump and Process Pumps Designed for the Total Range of Industry Services N N N N

Capacities to 1300 GPM (295 m3/h) Heads to 230 feet (126 m) Temperatures to 450° F (232° C) Pit Depths to 20 feet (6 m)

Design Features N N N N N N N N

Self-Priming Rugged Double Row Thrust Bearing Heavy Duty One-piece Shaft External Impeller Adjustment Available in a Wide Range of Alloys Recessed Impeller Design Sealless Design Optional Vapor Proof Construction

Services N N N N N N N

The CV 3171 is a recessed impeller, circular volute type sump pump. Ideal for large solids and shear sensitive fluids. It will pass any solid that will pass through the discharge pipe. Circular volute minimizes radial loads making this the ideal pump for low flow process applications.

10

Fiberous Wastewater Industrial Process Industrial Sump Wastes Tank Unloading Corrosive and Non-Corrosive Liquids Food Processing Chemical Slurries

Goulds CV 3171

Model CV 3171 Vertical Sump and Process Pumps Heavy Duty Design Features for a Wide Range of Services LABYRINTH BEARING SEAL Prevents premature bearing failure due to lubricant contamination.

C-FACE MOTOR MOUNTING Accommodates readily available C-face motors. Also available for P-base and IEC motors. CONTINUOUS HIGH PERFORMANCE Original high efficiency maintained by simple external adjustment resulting in long-term energy savings. DOUBLE ROW THRUST BEARING Grease lubricated—carries pump thrust load; sealed for outdoor installation. DISCHARGE LOCKED TO PUMP SUPPORT PLATE FOR STRENGTH

OPTIONAL UPPER STUFFING BOX

HEAVY COLUMN PIPE Provides rigid support for pump and bearings. LINESHAFT STEADY BEARING Grease lubricating sealed bearings furnished as standard—best for handling fluids with solids. RESTRICTOR BUSHING Close running bushing to prevent pressure loss from casing.

RECESSED IMPELLER Since impeller is recessed in the casing, velocities are low and solids contact with the casing are reduced. Wear rate, solids degradation, and shearing of liquids are minimized. OPTIONAL STRAINER Recommended for services where solids larger than the discharge of the pump can potentially enter the casing.

ANY MOUNTING REQUIREMENTS Met by support plate and optional pit cover. Float switches, alternators and other control devices can be easily mounted.

STEADY BEARING HOUSING Precision machined register fit of column, bearing housing and casing assures positive bearing and shaft alignment. Completely interchangeable with all lineshaft bearing options.

HEAVY DUTY ONE-PIECE SHAFT With closely spaced steady bearings assures long life and low maintenance.

NON-CLOG CIRCULAR CASING Large open passageways prevent clogging when handling bulky, fibrous, or stringy liquids. Circular Volute reduces radial loads during low flow operation, extending steady bearing life.

11

Goulds CV 3171

CV 3171 Parts List and Materials of Construction Material Item Number

Cast Iron

Part Name

CD4

GA-20

100

Casing

D.I.

CD4

GA-20

101

Impeller

CD4

CD4

GA-20

105

Lantern Ring

106

Packing

Teflon

Teflon

Teflon

Acrylic Yarn

Acrylic Yarn

Acrylic Yarn

316SS or as Specified

316SS or as Specified

316SS or as Specified

D.I.

CD4

GA-20 Steel

107

Gland

108A

Adapter, Casing

112

Bearing, Ball

Steel

Steel

122

Shaft

Steel

316SS

C-20

123

Deflector

EPDM

EPDM

EPDM

134

Shell, Bearing

C.I.

C.I.

C.I.

136

Locknut, Bearing

Steel

Steel

Steel

155

Bushing (casing)

Carbon Teflon

Carbon Teflon

Carbon Teflon

187

Strainer (OPTIONAL)

Steel

316SS

C-20

189

Plate, Support

Steel or as Specified

Steel or as Specified

Steel or as Specified

190

Tubing, Lube Line

Steel

316SS

C-20

192

Column, Head

Steel

316SS

C-20

195

Pipe, Discharge

Steel

316SS

C-20

197

Steady Bearing

Carbon/Bronze/Rubber/Viton

Carbon/Bronze/Rubber/Viton

Carbon/Bronze/Rubber/Viton

213

Steady Bearing Housing

221

Upper Stuffing Box

240

Support, Motor

C.I.

C.I.

C.I.

242

Nut, Pipe

Steel

316SS

C-20

306

Extension, Column

Steel

316SS

C-20

315

Elbow, Discharge

D.I.

CD4

GA-20

332A

Seal, Labyrinth

Teflon /Viton

Teflon /Viton

Teflon /Viton

333

Seal, Housing

Steel/Nitrile

Steel/Nitrile

Steel/Nitrile

333H

Seal, Lip

Nitrile

Viton

Viton

351

Gasket, Casing

Nitrile/Acrylic

Nitrile/Acrylic

Nitrile/Acrylic

351A

Gasket, Elbow

Nitrile Acrylic

Nitrile/Acrylic

Nitrile/Acrylic

361A

Ring, Retaining Ball Bearing

Steel

Steel

Steel

369

Ring, Retaining Steady Bearing

316SS

316SS

C-20

369A

Ring, Retaining Shaft

Steel

Steel

Steel

C.I.

316SS

GA-20

Cast Iron or as Specified

Cast Iron or as Specified

Cast Iron or as Specified

382

Washer Lock Nut

Steel

Steel

Steel

412A

O-Ring, Impeller

Teflon

Teflon

Teflon

Construction Details All dimensions in inches and (mm). Pump

Shaft

2x2-8

2x2-10

3x3-10

2x3-13

3x4-13

Weight (3 Foot Depth) Less Motor Lb (kg)*

484 (220)

531 (241)

559 (254)

565 (257)

616 (280)

Weight—Add fo Each 6” of Length Lb (kg)

20 (9)

20 (9)

20 (9)

20 (9)

20 (9)

Maximum Diameter of Solids

1.75 (45)

1.75 (45)

2.75 (70)

1.75 (45)

2.75 (70)

Diameter at Impeller

0.6309 (16)

0.9008 (23)

0.9008 (23)

0.9008 (23)

0.9008 (23)

Diameter at Coupling End

1.375 (35)

Diameter at Steady Bearing of Solids

1.625 (41)

Ball Bearing Bearings

Steady Bearing (Sleeve Type) Maximum Total Working Pressure—Casing

General

12

5308 or Equal 1.625 I.D. x 2.125 O.D. (41 I.D. x 54 O.D.) 4.00 LG. (102 LG.) 285 PSIG (1965 kPa)

Max. Liquid Temp.— Without Upper Stuffing Box

180° F (82° C)

Max. Liquid Temp.— With Upper Stuffing Box

450° F (232° C)

Goulds CV 3171

Sectional View Model CV 3171

240 332A 221

134

107

112 242

105 106 333 Upper Stuffing Box

136

189

369A 192

122

123

195

213 369

333H

306

190 197

155

108A 351

412A 101 100

315

187

351A

13

Goulds CV 3171

CV 3171 Hydraulic Coverage CAPACITY—50 Hz

m 90

FT. 0 300

85

280

80

260

75

TOTAL HEAD—60 Hz

70 65 55

180

50

160

120

30

100

25

80

15 10

80

300

140

35

20

200

100 400

130

140

500

600

2x2-10

5

20

0

0

3x3-10

2x2-8

40

0 0

GPM m3 /h

100

200

20

300

40

60

400 80

500

100

600

700

120 140 160

200

300

180

800 1000

400

1800 FT. 200 190 180 3500/2900 RPM 170 1750/1450 RPM 160 150 140 130 120 110 100 90 80 3x4-13 70 60 50 40 30 20 10 0 800 900 1000 1400 1800 2000

2x3-13

60

160 700

2x2-8

220 200

40

100

GPM

60

240

60

45

40

20

200

220

1200

300

400

m 60 55 50 45 40 35 30 25 20

TOTAL HEAD—50 Hz

0 m3 /h

15 10 5 0

800

CAPACITY—60 Hz

0 m3 /h 0 30 m

GPM

CAPACITY—50 Hz 20

60

40

100

200

80 300

100 400

120 500

140

160

600

180

700

800

100 FT. 90

70 FT.

m 20

60

1180/960 RPM

80

50

70 20

2x3-13 60

40

3x4-13 15

50 30

40 10

15

10

2x2-10 30

20

3x3-10

2x2-8

5

20 5

10 10

0

0 0 0

GPM 100 m3 /h 20

200 40

300 60

400 80

500 100

600

120

CAPACITY—60 Hz

14

140

700 160

800 180

0

900 200

220

0

TOTAL HEAD—50 Hz

TOTAL HEAD—60 Hz

25

Goulds CV 3171

Dimensions Model CV 3171 All dimensions in inches and (mm). Not to be used for construction.

B

A E G

D

Q

DIMENSIONS A

2x2-8

2x2-10

4.00 (102)

4.50 (114)

3x3-10 4.50

(114)

2x3-13

3x4-13

4.50 (114)

4.50 (114)

B

2.00 (51)

2.00 (51)

3.00

(51)

2.00 (51)

3.00 (76)

D

1.32 (34)

1.45 (37)

1.69

(43)

1.27 (32)

1.14 (29)

G

26.50 (673)

31.00 (787)

31.00

(787)

31.00 (787)

31.00 (787)

E

10.79 (274)

13.01 (330)

13.17

(335)

15.44 (392)

15.22 (387)

*

18.11 (460)

21.47 (545)

22.97

(583)

25.24 (641)

26.32 (669)

Q

*Add 3 in. (76) for float mounted option.

15

Goulds LF 3198 3196

PRO Services Extending Equipment Life... ®

Product Repair (all types and brands of rotating equipment) • Service Center Repair • Field Service • Parts Supply

Reliability Improvement • Inventory Management • Replacement/Exchange • Turnkey Repair/Installation • Training

Optimization of Assets • Predictive Analysis/Condition Monitoring • Root Cause Failure Analysis • Pump & System Assessments • Upgrades – Mechanical & Hydraulic • Maintenance Management/Contract Maintenance • Technical Expertise

• Fast Turnaround

• Factory Trained Service • Emergency Service – Personnel 24 hours/day, 7 days/week • Quality

ProSmart® provides continuous machinery monitoring to identify little problems before they become big problems…like downtime. Using wireless technology, advanced signal processing capabilities, and easy-to-deploy sensors, ProSmart offers an affordable means to monitor all of your rotating equipment anywhere in the world. By identifying and alerting you to changes in operating conditions, ProSmart increases your time to respond to either correcting the upset condition, or properly plan its repair. Key Features include: • Continuous data acquisition and analysis – ProSmart collects vibration, temperature, and available process conditions every five seconds; saving you time from routine data collection. • Automatic Notification and Accessibility – By alerting when a machine goes into distress, you are able to focus your resources on recovery activities. The ProNet web-hosted solution allows access to information anywhere in the world through a standard Internet browser connection. • Advanced diagnostic tools – More than simple overall data, ProSmart provides advanced analysis capabilities such as time-waveform, spectral, and spectral windowing. • Easy to deploy – Using plug and play sensors, wireless connectivity, and an industrially hardened enclosure, ProSmart can be easily deployed throughout your plant, including hazardous areas.

• ISO and Safety Certified

PUMPSMART PumpSmart ® is the latest advancement in pump control and protection to reduce energy consumption, increase uptime and decrease maintenance cost. It allows the pump to be right-sized to the application by dialing in the speed and torque which increases flow economy, reduces heat and vibration, and improves overall system reliability. • Simplified Pump Control — PumpSmart was designed specifically to optimize pumping applications and can be used to control a single pump or coordinate between multiple pumps without the need for an external controller. • Pump Protection — PumpSmart guarantees to protect the pump from upset conditions with patented sensorless pump protection algorithms. • Smart Flow — PumpSmart features a sensorless flow function for centrifugal pumps that can calculate the flow of the pump within ± 5% of the pump rated flow. • Drive for the DCS — While most VFDs can only provide basic information, PumpSmart offers unparalleled insight to the pump operation which allows for smoother process control and efficiency. • Pump Experts — PumpSmart is a variable speed drive with pump-specific algorithms imbedded into the drive. With over 150 years of pump knowledge, let the pump experts take responsibility of your pump system.

Visit our Web site at www.gouldspumps.com

Form B3171/CV3171 10/08

© 2008 Goulds Pumps, Incorporated A subsidiary of ITT Corporation, Inc.