Global Technical Standards Index: Dep Specification

 

 

DEP SPECIFICATION

GLOBAL TECHNICAL STANDARDS INDEX

DEP 00.00.05.05-Gen. February 2012

ECCN EAR99

DESIGN AND ENGINEERING PRACTICE

© 2012 Shell Group of companies  All rights reserved. reserved. No part of this publication may be repro reproduced, duced, stored in a retrieval sy system, stem, publish published ed or transm transmitted, itted, in any form or by any means, w without ithout the prior written permission of the copyright owner or Shell Global Solutions International BV. This document contains information information that is classified as EAR99 and, as a consequence, can neither be exported nor re-exported to any country which is under an embargo of the U.S. government pursuant to Part 746 of the Export Administration Regulations (15 C.F.R. Parts 746) nor can be made available to any national of such country. In addition, the information in this document cannot be exported nor re-exported to an end-user or for an end-use that is prohibited by Part 744 of the Export Administration Regulations (15 C.F.R. Parts 744).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 2

PREFACE DEP (Design and Engineering Practice) publications reflect the views, at the time of publication, of Shell Global Solutions International B.V. (Shell GSI) and, in some cases, of other Shell Companies. These views are based on the experience acquired during involvement with the design, construction, operation and maintenance of processing units and facilities. Where deemed appropriate DEPs are based on, or reference international, regional, national and industry standards. The objective is to set the standard for good design and engineering practice to be applied by Shell companies in oil and gas production, oil refining, gas handling, gasification, chemical processing, or any other such facility, and thereby to help achieve maximum technical and economic benefit from standardization. The information set forth in these publications is provided to Shell companies for their consideration and decision to implement. This is of particular importance where DEPs may not cover every requirement or diversity of condition at each locality. The system of DEPs is expected to be sufficiently flexible to allow individual Operating Units to adapt the information set forth in DEPs to their own environment and requirements. When Contractors or Manufacturers/Suppliers use DEPs, they shall be solely responsible for such use, including the quality of their work and the attainment of the required design and engineering standards. In particular, for those requirements not specifically covered, the Principal will typically expect them to follow those design and engineering practices that will achieve at least the same level of integrity as reflected in the DEPs. If in doubt, the Contractor or Manufacturer/Supplierr shall, without detracting from his own responsibility, consult the Principal. Manufacturer/Supplie The right to obtain and to use DEPs is restricted, and is granted by Shell GSI (and in some cases by other Shell Companies) under a Service Agreement or a License Agreement. This right is granted primarily to Shell companies and other companies receiving technical advice and services from Shell GSI or another Shell Company. Consequently, three categories of users of DEPs can be distinguished: 1)

Operating Units having a Service Agreement with Shell GSI or another Shell Company. The use use of DEPs by these Operating Units is subject in all respects to the terms and conditions of the relevant Service Agreement.

2)

Other parties who are authorised to use DEPs subject to appropriate contractual arrangements (whether as part of a Service Agreement or otherwise).

3)

Contractors/subcontrac Contractors/subcontractors tors and Manufacturers/Suppliers Manufacturers/Suppliers under a contract with users referred to under 1) or 2) which requires that tenders for projects, materials supplied or - generally - work performed on behalf of the said users comply with the relevant standards.

Subject to any particular terms and conditions as may be set forth in specific agreements with users, Shell GSI disclaims any liability of whatsoever nature for any damage (including injury or death) suffered by any company or person whomsoever as a result of or in connection with the use, application or implementation of any DEP, combination of DEPs or any part thereof, even if it is wholly or partly caused by negligence on the part of Shell GSI or other Shell Company. The benefit of this disclaimer shall inure in all respects r espects to Shell GSI and/or any Shell Company, or companies affiliated to these companies, that may issue DEPs or advise or require the use of DEPs. Without prejudice to any specific terms in respect of confidentiality under relevant contractual arrangements, DEPs shall not, without the prior written consent of Shell GSI, be disclosed by users to any company or person whomsoever and the DEPs shall be used exclusively for the purpose for which they have been provided to the user. They shall be returned after use, including any copies which shall only be made by users with the express prior written consent of Shell GSI. The copyright of DEPs vests in Shell Group of companies. Users shall arrange for DEPs to be held in safe custody and Shell GSI may at any time require information satisfactory to them in order to ascertain how users implement this requirement.  All administrative administrative queries should should be directed to the DEP Administrator in Shell Shell GSI.

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 3 TABLE OF CONTENTS

1. 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9

INTRODUCTION ........................................................................................................4 ........................................................................................................4   SCOPE........................................................................................................................4  DEPS AND OTHER TYPES OF TECHNICAL STANDARDS ....................................4  STANDARD DRAWINGS, STANDARD FORMS AND REQUISITIONS....................5 REQUISITIONS.................... 5  DISTRIBUTION OF DEPS..........................................................................................5  DISTRIBUTION OF OTHER GLOBAL TECHNICAL STANDARDS...........................5  AMENDMENTS ..........................................................................................................5 ..........................................................................................................5  CUSTODIANSHIP ............................................................................... ......................................................................................................5 .......................5  SUMMARY OF MAIN CHANGES...............................................................................5  COMMENTS ON THIS DEP .......................................................................................5 .......................................................................................5  

PART I

CURRENT STANDA STANDARDS RDS LISTED BY ENGINEERING DISCIPLINE .......................6  

1.

ADMINISTRATIVE (INDICES) ............................................................................. ...................................................................................6 ......6  

2.

ADMINISTRATIVE (TECHNICAL STANDARDS STANDA RDS TEAM) ..........................................6 

3.

ANA ANALYTICAL LYTICAL ...................................................................................... .............................................................................................................6 .......................6 

4.

CIVIL, STRUCTURAL & OFFSHORE .......................................................................6 

5.

ELECTRICAL .............................................................................................................8 .............................................................................................................8 

6.

HEALTH......................................................................................................................9 

7.

MECHANICAL , MATERIALS MATERIA LS & INTEGRITY.............................................................9 

8. 9.

OPERATIONS EXCELLENCE EXCELL ENCE & ASSET MANAGEMENT.....................................12 MANA GEMENT.....................................12  PETROLEUM ENGINEERING .................................................................................12 

10.

PIPELINES, FLOW ASSURA ASSURANCE NCE SYSTEMS & SUBSEA .....................................12 

11.

PROCESS AUTOMATION, CONTROL, AND OPTIMIZATION ..............................14 

12.

PROCESS ENGINEERING ......................................................................................15 

13.

TECHNICAL SAFETY ENGINEERING................................................ ENGINEERING....................................................................15 ....................15 

14.

PROJECT SERVICES..............................................................................................15 

15.

QUALITY QUAL ITY ASSURANCE ..........................................................................................16 

16.

ROTATING EQUIPMENT.........................................................................................16 

17.

TELECOMS ..............................................................................................................17 ..............................................................................................................17 

18.

UTILITIES & HEAT TRANSFER ..............................................................................17 

19.

WELLS WELL S ENGINEERING ...........................................................................................18 

PART II

NUMERICAL LISTING .............................................................................................20 

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 4

1.

INTRODUCTION

1.1

SCOPE This index lists the global technical standards in circulation on the date of issue. In Part I, the current set of standards is listed, organized by engineering discipline. In Part II, the standards are listed in numerical order. Part II also shows standards that have been withdrawn. The Custodian of each standard is also shown in Part II. In addition to DEPs, this index includes other types of global technical standards administered by the Technical Standards Group; see (1.2). Standard drawings, standard forms and standard requisitions are not covered in this index, as they are covered in separate indices; see (1.3). This index replaces the previous index dated September 2011; see (1.8) regarding the main changes.

1.2

DEPS AND OTHER TYPES OF TECHNICAL STANDARDS The DEPs and other technical standards administered by the Technical Standards Group are classified as follows: Classificati on

Type

Purpose

DEP-Gen

DEP-Specification  

(1)

For project use in engineering, procurement and construction. Provides a basis for understanding between the Principal, Contractor and Manufacturer/Supplier, specifying requirements for a product, process or service

(2)

DEP-Informative  

A companion document to the DEP Specification of the same number. Explains the reasons for certain requirements in the DEP Specification and contains background information. For Shell use – not intended to be given to Engineering Contractor or Manufacturers/Suppliers.

WS-Gen

(3)

Wells Standard  

Restricted access within Shell only. Provides a basis for understanding between the Principal, Contractor and Manufacturer/Supplier, specifying requirements for a product, material or process specifically for oil and gas wells.

DWS-Gen

RMP-Gen

NOTES:

Deepwater Standard(4) 

Restricted access within Shell only.

Run & Maintain (5) Practice  

For internal Shell use.

Provides a basis for understanding between the Principal, Contractor and Manufacturer/Supplier, specifying requirements for a product, material or process specifically for deepwater installations.

 Applies to the “operate, inspect and maintain” phase of an asset life.

1. Distributed within Shell companies via “DEPs on the Web”. Distributed under license agreement to authorised Customers and, where necessary, to Shell nominated Contractors and Manufacturers/Suppliers Manufacturers/Suppl iers via DVD-ROM. 2. Distributed for use within Shell Shell via “DEPs “DEPs on the Web”. Distributed under under license agreement agreement to authorised, select Customers via DVD-ROM. 3. Restricted access access within within Shell via the Technical Standards Standards Portal 4. Restricted access access within within Shell via the Technical Standards Standards Portal 5. Access within within Shell only via via the Technical Technical Standards Standards Portal

 

ECCN EAR99

1.3

DEP 00.00.05.05-Gen. February 2012 Page 5

STANDARD DRAWINGS, STANDARD FORMS AND REQUISITIONS Standard Drawings are indexed in DEP 00.00.06.06-Gen. Standard Forms are indexed in DEP 00.00.10.05-Gen. Requisition sheets are indexed in DEP 30.10.01.10-Gen.

1.4

DISTRIBUTION OF DEPS Shell companies having access to the Shell Wide Web are provided access to the DEPs through “DEPs on the Web”, available through the Shell Technical Standards web portal at sww.shell.com/standards..  sww.shell.com/standards (1)

 Authorised recipients r ecipients of the DEPs are entitled to receive the DEPs via DVD-ROM . On a regular basis (currently twice per year) a nominated focal point in each authorised company is sent the specified quantity of DVD-ROMs containing the DEPs. The authorised company is responsible for providing DEPs to their Contractors and Manufacturers. Shell GSI can provide DEPs directly to Contractors and Manufacturers for an administrative fee. NOTE:

1.5

DEP Informatives are for internal use and are not to be distributed outside of Shell, except under license agreement to authorised select Customers only.

DISTRIBUTION OF OTHER GLOBAL TECHNICAL STANDARDS Global Technical Standards other than DEPs, as described in (1.2), are made available via the Techical Standards webwith portal at sww.shell.com/standards sww.shell.com/standards. .  Updates to these documents generally coincide the distribution of the DEPs as described in (1.4). Standard Drawings, Standard Forms and Requistions are distributed via “DEPs on the Web” and by DVD-ROM in the same manner as DEPs.

1.6

AMENDMENTS Between formal revisions, if an amendment is required to a standard, a "Circular" is issued. These circulars are numbered x/y, where "x" is a sequential number and "y" is the year in which it was issued.  Amended standards are indicated in the 2nd column of Part II of this index.

1.7

CUSTODIANSHIP The Custodians responsible for active standards are identified in the 4th column of the numerical index (Part II).

1.8

SUMMARY OF MAIN CHANGES This index is a revision of the index of the same number dated September 2011. The main, non-editorial changes are to update the index to reflect the current status with version 34 of the DEPs. New, revised and amended standards are identified in red text in Part I. In Part II, changes are indicated by a vertical line ( | ) in the left margin of the index and the specific changes are shown in red text.

1.9

COMMENTS ON THIS DEP Comments on this index may be sent to the Administrator at [email protected] [email protected],, using the DEP Feedback Form. The DEP Feedback Form can be found on the main page of “DEPs on the Web”, available through the Global Technical Standards web portal http://sww.shell.com/standards and on the main page of the DEPs DVD-ROM. http://sww.shell.com/standards 

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 6

PART I CURRENT STANDARDS LISTED BY ENG ENGINEERING INEERING DISCIPLINE

1.

ADMINISTRATIVE (INDICES)

DEP Number

Title

DEP 00.00.05.05-Gen.

Global technical standards index.

DEP 00.00.06.06-Gen.

Standard drawings index.

DEP 00.00.10.05-Gen.

Standard forms index.

DEP 30.10.01.10-Gen.

Requisitions index.

2.

ADMINISTRATIVE (TECHNICAL STANDARDS TEAM)

DEP 00.00.00.30-Gen.

Procedure for global technical standards publications.

DEP 00.00.07.10-Gen.

Design class tables.

DEP 00.00.07.30-Gen.

Content and drafting of a functional specification, and a technical specification, and the classification classificati on of products, processes and services (endorsement of ISO 13879, ISO 13880 and ISO/TR 13881).

DEP 00.00.20.10-Gen.

The use of SI quantities and units (endorsement of ISO/IEC 80000).

DEP 02.00.00.10-Gen.

Preparation and microfilming of technical drawings.

3.

ANALYTICAL

DEP 32.31.56.30-Gen.

Implementation of near-infrared systems for main fuels blending.

DEP 34.17.10.31-Gen.

Laboratories.

4.

CIVIL, STRUCTURAL & OFFSHORE

DEP 30.46.00.31-Gen.

Thermal insulation.

DEP 30.48.30.31-Gen.

Cement lining of pipes.

DEP 30.48.60.12-Gen.

Design and installation of chemical-resistant chemical-resistant linings for concrete structures.

DEP 31.06.15.10-Gen.

Marine loading arms (amendments/supplements (amendments/supplements to OCIMF design and construction specification for marine loading arms).

DEP 31.40.10.22-Gen.

Top tension riser tensioning systems.

DEP 31.76.10.11-Gen.

Installation, testing and balancing, and commissioning commissioning of HVAC systems.

DEP 34.00.01.10-Gen.

Earthquake design for onshore facilities - Seismic hazard assessment.

DEP 34.00.01.30-Gen.

Structural design and engineering of onshore structures.

DEP 34.11.00.10-Gen.

Onshore & Nearshore Site investigations investigations..

DEP 34.11.00.11-Gen.

Site preparation and earthworks including tank foundations and tank farms.

DEP 34.11.00.12-Gen.

Geotechnical and foundation engineering – onshore.

DEP 34.13.20.31-Gen.

Roads, paving, surfacing, cable trenches, slope protection and fencing.

DEP 34.14.20.31-Gen.

Drainage systems and primary treatment facilities.

DEP 34.17.00.32-Gen.

Design and engineering of buildings.

DEP 34.17.10.30-Gen.

Design of blast resistant onshore buildings, control rooms and field auxiliary rooms.

DEP 34.17.10.33-Gen.

Portable blast-resistant modules.

DEP 34.17.10.34-Gen.

Mobile camps - civil site assessments.

DEP 34.19.19.11-Gen.

Grouting of equipment and structure bases.

DEP 34.19.20.11-Gen.

Passive fire protection for onshore facilities.

DEP 34.19.20.31-Gen.

Reinforced concrete structures.

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 7

DEP 34.24.26.31-Gen.

Steel stacks (amendments/supplements (amendments/supplements to CICIND Model Code).

DEP 34.24.27.31-Gen.

Reinforced concrete stacks.

DEP 34.28.00.31-Gen.

Onshore steel structures.

DEP 34.28.00.33-Gen.

Onshore ancillary steel structures.

DEP 34.51.01.32-Gen.

Full containment refrigerated LNG tanks.

DEP 34.51.01.34-Gen.

Full containment refrigerated LPG tanks.

DEP 35.00.00.10-Gen.

Vessel integrity, marine systems – requirements for selection and operation of vessels (Endorsement of DNV RP-H104).

DEP 35.00.10.10-Gen.

Design of jetty facilities (amendments/supplements (amendments/supplements to BS 6349-1/2/4).

DEP 37.00.10.10-Gen.

Metocean design and operating considerations (endorsement of ISO 19901-1:2005).

DEP 37.00.10.11-Gen.

Metocean data acquisition – definition, implementation and analysis.

DEP 37.00.10.12-Gen.

Metocean data acquisition - Real time systems.

DEP 37.01.10.11-Gen.

Design of offshore topsides facilities against fire and blast loading (amendments/suppl (amendments/supplements ements to  API RP-2FB).

DEP 37.05.10.12-Gen.

Design of hose bulk transfer facilities for offshore installations.

DEP 37.11.00.30-Gen.

Site specific assessment of mobile offshore jack-up units.

DEP 37.14.10.10-Gen.

Drain systems for offshore installations installations..

DEP 37.17.10.10-Gen.

Design of offshore living quarters.

DEP 37.17.10.11-Gen.

Design of offshore temporary refuges.

DEP 37.19.00.10-Gen.

Offshore structures - General requirements (endorsement of ISO 19900).

DEP 37.19.00.12-Gen.

Offshore topsides structures (amendments/supp (amendments/supplements lements to ISO 19901-3:2010).

DEP 37.19.00.30-Gen.

Fixed steel offshore structures (amendments/suppl (amendments/supplements ements to ISO 19902:2007).

DEP 37.19.10.30-Gen.

Weldable structural steels for fixed offshore structures (amendments/supplements (amendments/supplements to EN 10225 and EN 10025).

DWS 37.19.20.11-Gen.

Weight management plan for floating platforms (amendments/suppl (amendments/supplements ements to ISO 19901-5).

RMP 37.19.60.50-Gen.

Structural inspection of offshore installations.

DEP 37.81.10.10-Gen.

Generic design and analysis for steel catenary risers and catenary umbilical systems for offshore structures.

DWS 37.81.10.11-Gen.

Design and analysis of top tension risers for deepwater offshore floating structures (based on API RP 2RD/ISO WD 13628-12).

DEP 37.81.10.12-Gen.

Design of anchor piles for deepwater mooring systems (based on API RP 2SK).

DEP 37.81.10.14-Gen.

Global design and analysis of deepwater tension leg platforms (amendments/supplements (amendments/supplements to  API RP-2T).

DWS 37.81.10.18-Gen.

Design specification specification for deepwater tension leg platform, semisubmersible semisubmersible and spar hull (based on  API RP 2T and API RP RP 2FPS).

DEP 37.81.10.19-Gen.  37.81.10.19-Gen. 

Marine operations requirements - loadout, transportation and installation deepwater structures (amendments/supplements (amendments/supp lements to ISO 19901-6 or API RP 2MOP).  2MOP).  

DEP 37.81.10.20-Gen.  37.81.10.20-Gen. 

Design of driven pile foundations for tension leg platforms (based on API RP 2T).  2T).  

DEP 37.81.10.21-Gen.  37.81.10.21-Gen. 

Structural design of tendon systems for deepwater offshore tension leg platforms (amendments/supplements (amendments/suppl ements to API RP 2T).  2T). 

DEP 37.81.10.31-Gen.

Structural steel design of small deepwater offshore skids, facility packages, and subsea sleds and manifolds (based on AISC Steel Construction Manual ASD, API RP 2A-WSD and AWS D1.1).

DEP 37.81.10.32-Gen.

Structural steel fabrication of small deepwater offshore skids, facility packages, and subsea sleds and manifolds (based on AISC Steel Construction Manual ASD, API RP 2A-WSD and AWS D1.1).

DEP 37.81.10.33-Gen.

Structural

weldi welding ng

and

inspection inspection

of

deepwater

(amendments/supplements (amendments/suppl ements to AWS D1.1/D1.1M:2008).

floating

production

sy systems stems

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 8

DEP 37.81.10.34-Gen.

Structural fabrication of deepwater floating production systems (based on API RP 2FPS).

DWS 37.81.10.36-Gen.

Structural steel design of deepwater offshore topsides decks for floating systems.

DWS 37.81.20.35-Gen.

Technical specification for elastomeric flexible joints for use in deepwater offshore dynamic riser applications.

DEP 37.81.20.36-Gen.

Syntactic foam buoyancy modules for use in deepwater offshore dynamic riser applications.

DEP 37.81.21.30-Gen.

Manufacture, testing, and inspection of permanent mooring system chain and accessories for floating structures (based on DNV-OS-E302).

DEP 37.81.21.31-Gen.

Permanent mooring system wire rope, sockets, pins and connectors for deepwater floating structures (based on DNV-OS-E304).

DEP 37.81.21.35-Gen.

General requirements for top tensioned riser tendon and mooring equipment for deepwater floating production systems.

DEP 37.90.10.32-Gen.

Dynamically positioned (DP) vessels for construction, drilling/compl drilling/completions/well etions/well intervention activities – selection and operation.

DEP 37.91.10.10-Gen.

Single point mooring (SPM) systems.

DEP 37.91.10.11-Gen.

Mobile mooring systems (based on API RP 2SK, API RP 2SM and API RP 2I).

DEP 37.91.20.30-Gen.

Oil loading and discharge hoses for offshore mooring installations (amendments/supplements (amendments/supplements to OCIMF Guide).

DEP 37.92.10.30-Gen.

Offshore pedestal-mounted cranes (amendments/supplements (amendments/supplements to API Spec 2C).

DEP 60.00.10.13-Gen.

Mobile crane foundation assessment.

DEP 80.00.10.11-Gen. DEP 80.00.10.12-Gen.

Layout of onshore facilities. Layout of offshore facilities.

DEP 80.80.00.10-Gen.

Offshore facilities life-saving appliance requirements (amendments/supplem (amendments/supplements ents to SOLAS and associated LSA).

5.

ELECTRICAL

DEP 33.64.10.10-Gen.

Electrical engineering design .

DEP 33.64.10.12-Gen.

Electrical supply and generation - design and operation.

DEP 33.64.10.17-Gen.

Application of protective functions for electrical systems.

DEP 33.64.10.32-Gen.

Electrical network monitoring and control system for industrial networks.

DEP 33.64.10.33-Gen.

Electromagnetic compatibility (EMC).

DEP 33.64.20.10-Gen.

Electrical engineering design for North American application.

DEP 33.64.30.30-Gen.

Electrical packaged equipment requirements for North American application.

DEP 33.65.11.31-Gen.

Synchronous AC machines (amendments/suppl (amendments/supplements ements to IEC 60034-1 and IEC 60034-14).

DEP 33.65.11.32-Gen.

Packaged unit AC generator sets.

DEP 33.65.11.34-Gen.

Synchronous AC machines for North American application (amendments/suppl (amendments/supplements ements to API 546).

DEP 33.65.40.31-Gen.

Power transformers (amendments/supplements (amendments/supplements to IEC 60076-1 and IEC 60076-11).

DEP 33.65.40.32-Gen.

Liquid-immersed transformers for North American application.

DEP 33.65.50.31-Gen.

Static DC uninterruptible power supply (DC UPS) units.

DEP 33.65.50.32-Gen.

Static A.C. uninterruptible power supply unit (static A.C. UPS unit).

DEP 33.65.50.33-Gen.

Design and fabrication of AC uninterruptible power supplies for North American applications.

DEP 33.65.50.34-Gen.

Design and fabrication of DC uninterruptible power supplies for North American applications.

DEP 33.65.60.30-Gen.

Solar power systems.

DEP 33.66.05.31-Gen.

Electrical machines - Cage-induction types (amendments/supple (amendments/supplements ments to IEC 60034-1 and IEC 60034-14).

DEP 33.66.05.33-Gen. DEP 33.66.05.35-Gen.

A.C. electrical variable speed drive systems. LV induction motors for North American application (amendments/supplements (amendments/supplements to IEEE Std 841).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 9

DEP 33.66.05.36-Gen.

MV induction motors for North American application (amendments/suppl (amendments/supplements ements to API 541).

DEP 33.66.05.37-Gen.

General-purpose form-wound squirrel cage induction motors – 250 horsepower and larger for North American application (amendments/supplements to API 547).

DEP 33.66.05.38-Gen.

Design and fabrication of MV motor control centres for North American application (amendments to UL 347/CAS C22.2 No. 253-09).

DEP 33.66.05.39-Gen.

Design and fabrication of low voltage motor control centres for North American application (amendments to UL 845/CSA C22.2 NO. 254-05).

DEP 33.67.01.31-Gen.

Low voltage switchgear and controlgear assemblies (amendments/supplements (amendments/supplements to IEC 61439).

DEP 33.67.01.32-Gen.

Design and fabrication of LV switchgear for North American applications.

DEP 33.67.40.30-Gen.

Design and fabrication of MV switchgear for North American applications.

DEP 33.67.51.31-Gen.

High-voltage switchgear and controlgear assemblies for rated voltages between 1 kV and 52 kV (amendments/supplements (amendments/suppl ements to IEC 62271-200).

DEP 33.68.30.31-Gen.

Electrical heating system for frost heave prevention of refrigerated hydrocarbon storage tanks.

DEP 33.68.30.32-Gen.

Electrical trace heating.

DEP 33.68.30.33-Gen.

Electrical process heaters.

DEP 33.80.00.30-Gen.

Navigational aids for fixed offshore structures.

DEP 63.10.08.11-Gen.

Field commissioning commissioning of electrical installations and equipment.

DEP 63.10.08.14-Gen.

Field commissio commissioning ning and testing of electrical installations and equipment for North American application.

RMP 63.10.08.50-Gen.

Maintenance of electrical installations and equipment.

DEP 63.20.08.10-Gen.

Electrical installation for North American application.

DEP 70.08.10.13-Gen.

Electrical workshop - Test equipment and tools.

DEP 80.00.10.13-Gen.

Area classificati classification on and electrical equipment spacing for North American application.

DEP 80.64.10.10-Gen.

Electrical safety rules.

6.

HEALTH

DEP 30.00.60.10-Gen.

Human factors engineering in projects.

DEP 30.00.60.12-Gen.

Human factors engineering - investment justification model.

DEP 30.00.60.13-Gen.

Human factors engineering – valves.

DEP 30.00.60.14-Gen.

Human factors engineering - application during construction.

DEP 30.00.60.15-Gen. DEP 30.00.60.16-Gen.

Human factors engineering - control room design. Human factors engineering - human/machine interface design for situation awareness.

DEP 30.00.60.18-Gen.

Human factors engineering - design and procurement of skid-packaged units.

DEP 30.00.60.19-Gen.

Human factors engineering – Design for process safety critical tasks.

DEP 30.00.60.20-Gen.

Human factors engineering – Workspace design.

DEP 30.00.60.21-Gen.

Human factors engineering – labelling of facilities, equipment and piping.

7.

MECHANICAL, MECHANICAL, MATERIALS & INTEGRITY INTEGRITY

DEP 30.10.02.11-Gen.

Metallic materials - selected standards .

DEP 30.10.02.13-Gen.

Non-metallic materials - selection and application.

DEP 30.10.02.14-Gen.

Carbon steel corrosion engineering manual for upstream facilities.

DEP 30.10.02.15-Gen.

Materials for use in H2S-containing environments in oil and gas production (amendments/supplements (amendments/suppl ements to ISO 15156:2009).

DEP 30.10.02.16-Gen.

Hydrogen induced cracking sensitivity test (amendments/supplements (amendments/supplements to NACE TM0284).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 10

DEP 30.10.02.17-Gen.

Wet H2S requirements for downstream pressure vessels and piping.

DEP 30.10.02.31-Gen.

Metallic materials - Prevention of brittle fracture in new assets.

DEP 30.10.02.32-Gen.

Materials and fabrication requirements for 2¼Cr-1Mo, 2¼Cr-1Mo-¼V, 3Cr-1Mo & 3Cr-1Mo-¼V heavy wall pressure vessels (amendments/supplements to API RP 934-A).

RMP 30.10.02.50-Gen.

Metallic materials - Prevention of brittle fracture in existing assets.

DEP 30.10.05.11-Gen.

Plant model construction and review.

DEP 30.10.60.18-Gen.

Welding of metals (amendments/supplem (amendments/supplements ents to API RP 582).

DEP 30.10.60.30-Gen.

Welding on pressurized pipes (amendments/supplements (amendments/supplements to API Standard 1104).

DEP 30.10.60.31-Gen.

Oxidation of stainless steel weldments.

DEP 30.10.73.10-Gen.

Cathodic protection.

DEP 30.10.73.31-Gen.

Design of cathodic protection systems for onshore buried pipelines (amendments/supplements (amendments/supplements to ISO 15589-1:2003).

DEP 30.10.73.32-Gen.

Cathodic Protection Systems for Subsea Pipelines and Hardware (Amendments/Supple (Amendments/Supplements ments to  ANSI/NACE SP0607-2007/ISO SP0607-2007/ISO 15589-2).

DEP 30.10.73.33-Gen.

Installation and commissioning of onshore cathodic protection systems.

DEP 30.48.00.31-Gen.

Protective coatings for onshore facilities.

DEP 30.48.00.32-Gen.

Coating of fasteners.

DEP 30.48.40.31-Gen.

Thermal spray coatings of aluminium.

DEP 30.48.60.10-Gen.

Rubber-lined process equipment.

DEP 30.48.60.13-Gen.

Design and installation of chemical-resistant chemical-resistant brick lining for process equipment.

DEP 30.55.03.30-Gen.

Validation of NDE for fabrication inspection.

DEP 31.01.10.10-Gen.

Chemical injection systems for upstream production facilities.

DEP 31.01.10.11-Gen.

Corrosion prevention and control of water injection systems (EP).

DEP 31.10.00.10-Gen.

Positive material identification (PMI) program.

DEP 31.10.00.31-Gen.

Noise control (amendments/suppl (amendments/supplements ements to ISO 15664).

DEP 31.10.03.10-Gen.

Symbols and identification system – Mechanical.

DEP 31.22.01.31-Gen.

Rotating disc contactors.

DEP 31.22.10.32-Gen.

Pressure vessels; amendments/supple amendments/supplements ments to PD 5500.

DEP 31.22.10.35-Gen.

Manufacturing report for pressure vessels.

DEP 31.22.11.32-Gen.

Pressure vessels (amendments/suppl (amendments/supplements ements to EN 13445).

DEP 31.22.20.31-Gen.

Pressure vessels (based on ASME section VIII).

DEP 31.22.30.14-Gen. DEP 31.22.31.31-Gen.

Glass-fibre reinforced plastic vessels. Pressure vessels (based on Chinese code GB 150-1998).

DEP 31.24.40.12-Gen.

Fabric expansion joints (endorsement of RAL-GZ 719).

DEP 31.24.40.31-Gen.

Materials for high-temperature conversion process furnace parts.

DEP 31.24.49.31-Gen.

Fabrication of heater piping.

DEP 31.36.10.30-Gen.

Hydraulic systems for the operation of on/off valves in protective functions.

DEP 31.38.01.10-Gen.

Piping classes - basis of design.

DEP 31.38.01.11-Gen.

Piping - general requirements.

DEP 31.38.01.12-Gen.

Piping classes - refining and chemicals.

DEP 31.38.01.13-Gen.

Compilation of bill of material for piping isometrics.

DEP 31.38.01.15-Gen.

Piping classes - exploration and production.

DEP 31.38.01.19-Gen.

Water injection in Downstream hydroprocessing units for corrosion control.

DEP 31.38.01.21-Gen.

Compilation of a specification for piping systems.

DEP 31.38.01.29-Gen.

Pipe supports.

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 11

DEP 31.38.01.31-Gen.

Shop and field fabrication of piping.

DEP 31.38.30.11-Gen.

Protective steam heating of piping systems (non-electrical).

RMP 31.40.00.50-Gen.

Corrosion mitigation strategy for wet sour gas carbon steel pipelines.

DEP 31.40.10.19-Gen.

Glass-fibre reinforced plastic pipeline and piping systems.

DEP 31.40.10.20-Gen.

Spoolable fibre-reinforced plastic pipes.

RMP 31.40.10.50-Gen.

Glass-fibre reinforced plastic pipeline and piping systems - Maintenance and repair.

DEP 31.40.20.32-Gen.

CRA clad and CRA-lined steel pipe (amendments/supplem (amendments/supplements ents to API Spec 5LD).

DEP 31.40.20.33-Gen.

Linepipe induction bends (amendments/supplem (amendments/supplements ents to ISO 15590-1).

DEP 31.40.20.34-Gen.

Welded and seamless duplex and super duplex stainless steel line pipe (amendments/supplements (amendments/suppl ements to API Spec 5LC).

DEP 31.40.20.36-Gen.

Weldable martensitic stainless steel line pipe for use in oil and gas operations (amendments/supplements to API Spec 5LC). (amendments/supplements

DEP 31.40.20.37-Gen.

Linepipe for critical service (amendments/suppl (amendments/supplements ements to ISO 3183:2007).

DEP 31.40.20.39-Gen.

High density polyethylene pipelines and piping systems for oilfield applications.

DEP 31.40.21.30-Gen.

Pipeline fittings (amendments/supplements (amendments/supplements to ISO 15590-2).

DEP 31.40.21.34-Gen.

Carbon and low alloy steel pipeline flanges for use in oil and gas operations (amendments/supplements (amendments/suppl ements to ISO 15590-3).

DEP 31.40.30.31-Gen.

External polyethylene and polypropylene coating for line pipe (amendments/supple (amendments/supplements ments to ISO/DIS 21809-1:2009).

DEP 31.40.30.32-Gen.

External fusion-bonded epoxy powder coating for line pipe (amendments/supplements (amendments/supplements to

DEP 31.40.30.33-Gen.

ISO 21809-2:2007). Bituminous enamel coating of steel linepipe.

DEP 31.40.30.34-Gen.

Thermoplastic lined pipelines.

DEP 31.40.30.35-Gen.

Internal coating of line pipe for non-corrosive gas transmission service (amendments/supp (amendments/supplements lements to ISO 15741).

DEP 31.40.30.36-Gen.

Elastomer coatings and monel sheathing for offshore riser protection.

DEP 31.40.30.37-Gen.

External field joint and rehabilitation coating systems for line pipe.

DEP 31.40.30.39-Gen.

Internal fusion-bonded epoxy powder coating for water injection line pipe.

DEP 31.46.00.31-Gen.

Acoustic insulation for piping (amendments/supple (amendments/supplements ments to ISO 15665).

DEP 31.76.10.10-Gen.

Heating, ventilation and air conditioning for plant buildings.

DEP 34.51.01.31-Gen.

Vertical steel storage tanks – Selection design and construction (amendments/suppleme (amendments/supplements nts to EN 14015).

DEP 34.51.01.33-Gen.

Aboveground vertical storage tanks (amendments/suppl (amendments/supplements ements to API Standard 650).

DEP 34.51.11.30-Gen.

Mounded horizontal cylindrical vessels for pressurised storage of LPG at ambient temperatures (amendments/supplements to EEMUA 190). (amendments/supplements

DEP 34.51.90.10-Gen.

Demolition of storage tanks (endorsement of EEMUA 154).

DEP 37.19.30.30-Gen.

Cathodic protection systems for fixed offshore steel structures (amendments/supplements (amendments/supplements to NACE SP0176-2007).

DEP 37.76.10.10-Gen.

HVAC for offshore installations (amendments/sup (amendments/supplements plements to ISO 15138).

DEP 37.81.20.31-Gen.

Galvanic anodes for marine structures and pipelines – Specification and qualification – Modifications to ISO 15589-2.

DEP 37.81.20.40-Gen.

Impressed current laboratory testing of aluminum alloy anodes (amendments/supplements (amendments/supplements to NACE Std TM0190-2006).

DEP 37.81.40.30-Gen.

Syntactic foam insulation for flowlines.

DEP 37.81.40.34-Gen.

Insulation for pipe-in-pipe (PIP) flowlines.

DEP 37.81.40.40-Gen.

External Monel clad riser pipe.

DEP 37.81.40.41-Gen.

Hyperbaric welding of pipelines (amendments/sup (amendments/supplements plements to ISO 13847).

DEP 37.81.41.36-Gen.

Deepwater syntactic foam insulation for subsea structures.

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 12

DEP 37.81.41.37-Gen.

Qualification of insulation for deepwater applications.

DEP 39.01.10.11-Gen.

Selection of materials for life cycle performance (upstream facilities) - Materials selection process.

DEP 39.01.10.12-Gen.

Selection of materials for life cycle performance (upstream facilities) – Equipment.

DEP 39.01.10.30-Gen.

Specification for nickel base alloy 625 plus (UNS N07716) and alloy 725 (UNS N07725) for oil and gas drilling and production equipment.

DEP 39.01.10.32-Gen.

Specification of nickel base alloy 718 (UNS N07718) for oil and gas drilling and production equipment (amendments/supplements (amendments/supplements to API Standard 6A718).

DEP 44.24.90.31-Gen.

Refractory bricks and shapes.

DEP 44.24.90.32-Gen.

Classification of refractory bricks and shapes.

DEP 44.24.90.33-Gen.

Specification for sampling and testing of refractory bricks and shapes.

DEP 44.24.90.34-Gen.

Classification,, specification and testing for ancillary materials for refractory brick construction. Classification

DEP 44.24.90.35-Gen.

Specification and quality control for precast or specialty cast refractory baffle wall tile (shapes).

DEP 61.10.08.11-Gen.

Field inspection prior to commissioning commissioning of mechanical equipment.

DEP 61.38.10.10-Gen.

Shop and field fabrication of orifice meter runs.

DEP 61.40.20.30-Gen.

Welding of pipelines and related facilities (amendments/supple (amendments/supplements ments to ISO 13847:2000).

DEP 61.40.20.31-Gen.

Field welding of duplex and super duplex stainless steel pipelines (amendments/supplem (amendments/supplements ents to  API 1104).

DEP 61.40.20.36-Gen.

Welding of CRA-CLAD or CRA-LINED pipe materials (amendments/suppl (amendments/supplements ements to API 1104:20   edition).

DEP 64.24.32.11-Gen.

Refractory linings for sulphur recovery units (Claus and SCOT).

DEP 64.24.32.12-Gen.

Refractory lining for fluidized catalytic cracking unit (FCCU).

DEP 64.24.32.30-Gen.

Insulating and dense refractory concrete linings.

DEP 64.24.32.31-Gen.

Construction details for refractory brick and shape construction.

DEP 70.10.70.11-Gen.

Preservation of new and old equipment standing idle.

RMP 70.10.70.50-Gen.

Preservation of new and old equipment standing idle.

DEP 70.48.11.30-Gen.

Protective coatings for offshore facilities.

RMP 70.51.10.50-Gen.

Field inspection, maintenance and repair of vertical steel storage tanks (amendments/supplements (amendments/supplements to API 653 and EEMUA159).

DEP 74.00.10.10-Gen.

Shop and field pressure testing of piping systems.

DEP 80.36.00.30-Gen.

Relief devices - Selection, sizing and specification specification..

DEP 80.45.10.10-Gen.

Design of pressure relief, flare and vent systems.

DEP 80.46.30.11-Gen.

Interlocking systems for pressure relief valves.

8.

th

OPERATIONS EXCELLENCE & ASSET MANAGEMENT MANA GEMENT

DEP 01.00.09.10-Gen.

Operational tagging requirements.

DEP 70.08.10.11-Gen.

Mechanical maintenance equipment and tools.

DEP 70.10.80.11-Gen.

Cleaning of equipment.

DEP 70.10.90.11-Gen.

Spare parts.

DEP 82.00.10.30-Gen.

Engineering information specification (EIS).

9.

PETROLEUM ENGINEERING

DEP 25.80.10.10-Gen.

10.

Formation pressure prediction for development wells, appraisal wells and well entries/abandonments.

PIPELINES, FLOW ASSURA ASSURANCE NCE SYSTEMS & SUBSEA

DEP 31.27.00.20-Gen.

Design and supply of bulk solids bins and hoppers.

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 13

DEP 31.27.00.21-Gen.

Vibrating fluid bed drier/cooler systems.

DEP 31.27.00.22-Gen.

Enclosed drag conveyors.

DEP 31.27.00.23-Gen.

General purpose screw conveyors.

DEP 31.27.00.24-Gen.

Loss-in-weight feeders.

DEP 31.27.00.25-Gen.

Pressure process filters and systems – Technology selection, design and manufacture.

DEP 31.36.00.30-Gen.

Pipeline transportation systems - pipeline valves (amendments/supp (amendments/supplements lements to ISO 14313).

DEP 31.38.60.10-Gen.

Hot-tapping on pipelines, piping and equipment.

DEP 31.40.00.10-Gen.

Pipeline engineering (amendments/supplements (amendments/supplements to ISO 13623:2009).

RMP 31.40.00.51-Gen

Pipeline integrity.

DEP 31.40.10.10-Gen.

Riser design.

DEP 31.40.10.12-Gen.

Design of multiple-pipe slug catchers.

DEP 31.40.10.13-Gen.

Design of pipeline pig trap systems.

DEP 31.40.10.15-Gen.

Analysis of spans for submerged pipelines.

DEP 31.40.10.16-Gen.

Upheaval buckling of pipelines.

DEP 31.40.10.17-Gen.

Pipeline/trawlg Pipeline/trawlgear ear interaction.

DEP 31.40.10.18-Gen.

Pipeline engineering - Reliability-based Reliability-based limit states methods (amendments/supplements (amendments/supplements to ISO 16708).

DEP 31.40.11.32-Gen.

Pipelay survey, positioning and as-built reportings for offshore pipelines.

DEP 31.40.21.31-Gen.

Pipeline isolating joints (amendments/supplements (amendments/supplements to ISO 15590-2:2003).

DEP 31.40.21.33-Gen.

Pig signallers - intrusive type.

DEP 31.40.21.37-Gen.

Corrosion resistant alloy overlay subsea pipe and fittings excluding line pipe.

DEP 31.40.30.30-Gen.

Concrete coating of linepipe (amendments/suppl (amendments/supplements ements to ISO 21809-5).

DEP 31.40.40.38-Gen.

Hydrostatic pressure testing of new pipelines.

DEP 31.40.50.30-Gen.

Precommissioning Precommissioning of pipelines.

DEP 31.40.60.11-Gen.

Pipeline leak detection.

RMP 31.40.60.50-Gen.

Pipeline repairs.

DEP 37.80.00.30-Gen.

Design and operation of subsea production systems (based on ISO 13628).

DEP 37.80.00.33-Gen.

Design and operation of subsea production control systems (amendments/supplements (amendments/supplements to ISO 13628-6).

DEP 37.80.00.36-Gen.

Deepwater subsea vertical tree systems (amendments/supplements (amendments/supplements to ISO 13628-4).

DEP 37.80.00.38-Gen.

Deepwater jumper design, measurement, fabrication and testing.

DEP 37.80.02.31-Gen.

Seamless Super Duplex Tubing Manufacturing Specification for Deepwater Umbilicals and Subsea Distribution Hardware.

DEP 37.80.02.32-Gen.

Seam Welded Super Duplex Tubing Manufacturing Specification for Umbilicals and Subsea Distribution Hardware.

DEP 37.80.02.33-Gen.

Zinc clad duplex tubing manufacturing specification. specification.

DEP 37.80.02.35-Gen.

Medium voltage, 6kV (Um = 7.2kV) to 30kV (Um = 36kV), power conductors for deepwater umbilicals.

DEP 37.80.02.36-Gen.

Deepwater Umbilical Manufacturing (amendments/supplements (amendments/supplements to ISO 13628-5: 2002).

DEP 37.80.02.37-Gen.

Deepwater Subsea Controls, Power, and Chemical Distribution Manufacturing Specification.

DEP 37.80.03.30-Gen.

Umbilical transportation and installation (amendments/supple (amendments/supplements ments to ISO 13628-5: 2002).

DEP 37.80.03.31-Gen.

Deepwater subsea distribution hardware installation. installation.

DEP 37.80.10.30-Gen.

Deepwater subsea completion/workover completion/workover systems (amendments/supplements (amendments/supplements to ISO 13628-7).

DEP 37.81.40.31-Gen.

Welding of deepwater pipelines, flowlines and steel catenary risers (amendments and supplements to API 1104).

DEP 37.81.40.32-Gen.

Automated ultrasonic (AUT) of girth welds for carbon steel and CRA lined pipelines, flowlines and catenaryinspection risers.

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 14

DEP 37.81.40.35-Gen.

Deepwater collet type connector systems.

DEP 37.81.40.38-Gen.

Deepwater subsea manifold system (amendments/supple (amendments/supplements ments to ISO/DIS 13628-15 2009 and  API RP 17P 2009).

DEP 37.81.41.30-Gen.

Onshore fabrication of deepwater pipelines, flowlines, risers and their appurtenances.

DEP 37.81.41.33-Gen.

Offshore construction specification specification for deepwater pipelines, flowlines and risers.

DEP 37.81.41.35-Gen.

Offshore pipeline and umbilical/cable umbilical/cable crossings.

DEP 37.81.42.30-Gen.

Unbonded flexible pipe for offshore applications (amendments/supplements (amendments/supplements to ISO 13628-2 & ISO 13628-11).

DEP 37.81.42.31-Gen.

Deepwater pipeline end terminations and midline sleds.

DEP 37.81.42.34-Gen.

ROV operations for work-class vehicles.

DEP 37.81.42.35-Gen.

Qualification of girthweld inspection with automated ultrasonic inspection (AUT) systems.

11.

PROCESS AUTOMATION, CONTROL, AND OPTIMIZATION

DEP 31.40.70.30-Gen.

Quarter-turn actuators for on/off valves.

DEP 32.00.00.12-Gen.

Fiscal and sales allocation models for upstream production systems.

DEP 32.01.20.12-Gen.

Process Control Domain – Enterprise industrial automation information technology and security.

RMP 32.01.20.50-Gen.

Process Control Domain – Enterprise industrial automation information technology and security.

DEP 32.01.23.17-Gen.

Process control domain - Security requirements for suppliers.

DEP 32.01.40.31-Gen.

Requirements for real time production operations and production critical real time data.

DEP 32.10.03.10-Gen.

Instrumentation symbols and identification on process engineering flow schemes.

DEP 32.30.20.11-Gen.

Fire, gas and smoke detection systems.

DEP 32.30.20.13-Gen.

FOUNDATION  Fieldbus - Design and configuration.

DEP 32.30.20.14-Gen.

Instrument asset management.

DEP 32.30.20.15 

Gen.

DCS basic application standards.

DEP 32.30.20.16 

Gen.

Baselayer control applications.

™

DEP 32.30.20.17-Gen.

Integration of motor controls into BPCS.

RMP 32.30.20.50-Gen.

Fire, gas and smoke detection systems.

DEP 32.31.00.32-Gen.

Instruments for measurement and control.

DEP 32.31.00.34-Gen.

Instrumentation documents and drawings.

DEP 32.31.09.31-Gen.

Instrumentation for equipment packages.

DEP 32.31.50.10-Gen.

On-line process analysers.

DEP 32.31.50.13-Gen.

Analyser housing.

DEP 32.32.00.11-Gen.

Turbine fiscal metering systems for liquid hydrocarbons.

DEP 32.32.00.12-Gen.

Fiscal flow measurement of natural gas.

DEP 32.32.00.13-Gen.

Flow rate measurement in wet gas environments by means of venturi tubes and tracer dilution technology.

DEP 32.36.01.17-Gen.

Control valves - Selection, sizing and specification specification..

DEP 32.37.10.11-Gen.

Installation of on-line instruments.

DEP 32.37.20.10-Gen.

Instrument signal lines.

DEP 32.45.10.10-Gen.

Instrumentation of depressuring systems.

RMP 32.45.10.50-Gen.

Instrumentation of depressuring systems.

DEP 32.80.10.10-Gen.

Instrumented protective functions (IPF).

DEP 32.80.10.14-Gen.

Alarm management.

RMP 32.80.10.50-Gen. DEP 62.10.08.11-Gen.

The operation, testing and maintenance of instrumented protective functions (IPF). Inspection and functional testing of instruments.

 

ECCN EAR99

12.

DEP 00.00.05.05-Gen. February 2012 Page 15

PROCESS ENGINEERING

DEP 01.00.01.30-Gen.

Definition of temperature, pressure and toxicity levels.

DEP 01.00.02.11-Gen.

Preparation of process flow schemes and process engineering flow schemes.

DEP 01.00.02.12-Gen.

Preparation of safeguarding memoranda and process safeguarding flow schemes.

DEP 10.02.51.11-Gen.

Steam injection systems for safeguarding thermal cracking units.

DEP 20.04.10.10-Gen.

Glycol-type gas dehydration systems.

DEP 30.06.10.11-Gen.

Equipment in LPG installations. installations.

DEP 30.06.10.12-Gen.

Pressurised bulk storage installations for LPG.

DEP 30.06.10.13-Gen.

LPG bulk transfer and transportation.

DEP 30.06.10.18-Gen.

Pressurised bulk storage installations for LPG – at customer premises.

DEP 30.06.10.20-Gen.

ESD systems for loading and discharging liquefied gas carriers.

RMP 30.06.10.50-Gen.

ESD systems for loading and discharging liquefied gas carriers - Operations and maintenance.

RMP 30.06.10.51-Gen.

Equipment in LPG installations- Guidelines for operation.

RMP 30.06.10.52-Gen.

Pressurised bulk storage installations for LPG.

RMP 30.06.10.53-Gen.

LPG bulk transfer and transportation.

DEP 31.06.11.11-Gen.

Loading facilities for bulk road vehicles.

RMP 31.10.11.50-Gen.

Gaseous oxygen systems - Guidelines for operation and maintenance.

DEP 31.20.20.31-Gen.

Internals for columns.

DEP 31.22.05.11-Gen. DEP 31.22.05.12-Gen.

Gas/liquid separators - Type selection and design rules. Liquid/liquid and gas/liquid/liquid separators – Type selection and design rules.

DEP 31.27.21.10-Gen.

Filters for removing particles from hydroprocesser feeds - type selection and design rules.

13.

TECHNICAL SAFETY ENGINEERING

DEP 34.17.10.35-Gen.

Siting of onshore occupied portable buildings.

DEP 34.17.10.36-Gen.

Inflatable blast resistant shelters.

DEP 37.01.10.10-Gen.

Offshore production installations basic surface process safety systems.

DEP 80.00.10.10-Gen.

Area classificati classification. on.

DEP 80.45.10.11-Gen.

Overpressure and underpressure – Prevention and protection.

DEP 80.45.10.12-Gen.

Emergency depressuring and sectionalizi sectionalizing. ng.

DEP 80.45.10.13-Gen.

Alternative pressure relief design for assessment of existing facilities.

DEP 80.47.10.12-Gen.

Water-based fire protection systems for offshore facilities.

DEP 80.47.10.30-Gen.

Assessment of the fire safety of onshore installations.

DEP 80.47.10.31-Gen.

Active fire protection systems and equipment for onshore facilities.

DEP 80.47.10.32-Gen.

Fire-fighting agents and portable/mobile fire fighting equipment for onshore applications.

DEP 80.47.10.33-Gen.

Fire-fighting vehicles and fire stations.

DEP 80.80.00.11-Gen.

Control and mitigation of fires and explosions on offshore production installations (amendments/supplements (amendments/suppl ements to ISO 13702:1999).

DEP 80.80.00.12-Gen.

Offshore production installations - Requirements and guidelines for emergency response (amendments/supplements to ISO 15544:2000). (amendments/supplements

DEP 80.80.00.13-Gen.

Offshore production installations - Guidelines on tools and techniques for identification and assessment of hazardous events (amendments/supplements to ISO 17776).

14.

PROJECT SERVICES

DEP 82.00.10.12-Gen.

Life cycle costing (endorsement of ISO 15663-1).

 

ECCN EAR99

15.

QUALITY QUAL ITY ASSURANCE ASSURA NCE

DEP 82.00.10.10-Gen.

16.

DEP 00.00.05.05-Gen. February 2012 Page 16

Project quality assurance.

ROTATING EQUIPMENT

DEP 31.25.00.10-Gen.

Hoisting facilities and weather protection for rotating equipment.

DEP 31.29.00.10-Gen.

Installation of rotating equipment (amendments/supplements (amendments/supplements to API RP 686).

DEP 31.29.00.11-Gen.

Condition monitoring of rotating equipment.

DEP 31.29.00.30-Gen.

Oil mist lubrication systems.

DEP 31.29.00.32-Gen.

Special purpose gear units for petroleum, chemical and natural gas industry services (amendments/supplements (amendments/suppl ements to API 613).

DEP 31.29.00.33-Gen.

Shaft sealing systems for centrifugal and rotary pumps (amendments/suppl (amendments/supplements ements to ISO 21049:2004).

DEP 31.29.00.36-Gen.

Flexible couplings for mechanical power transmission - special purpose applications (amendments/ supplements to ISO 10441).

DEP 31.29.00.38-Gen.

General- purpose gear units (amendments/supplements (amendments/supplements to API 677).

DEP 31.29.00.39-Gen.

Shaft Sealing Systems for Centrifugal and Rotary Pumps - selection, testing and installation.

DEP 31.29.00.41-Gen.

Gears – selection, testing and installation.

DEP 31.29.02.11-Gen.

Pumps - selection, testing and installation.

DEP 31.29.02.30-Gen.

Centrifugal pumps (amendments/supplements (amendments/supplements to ISO 13709).

DEP 31.29.02.31-Gen.

Sealless centrifugal pumps for petroleum, heavy duty chemical, and gas industry services (amendments/supplements (amendments/suppl ements to API 685).

DEP 31.29.06.30-Gen.

Centrifugal submerged motor pumps and electro submersible hydraulic turbines.

DEP 31.29.06.31-Gen.

Seawater lift pumps.

DEP 31.29.12.30-Gen.

Reciprocating positive displacement pumps and metering pumps (amendments/supplem (amendments/supplements ents to  API 674 and API 675). 675).

DEP 31.29.22.11-Gen.

Positive displacement pumps – Rotary (amendments/supple (amendments/supplements ments to API 676).

DEP 31.29.40.10-Gen.

Compressors - Selection, testing and installation.

DEP 31.29.40.30-Gen.

Axial, centrifugal and expander compressors (amendments/supplements (amendments/supplements to API Std 617).

DEP 31.29.40.31-Gen.

Reciprocating compressors (amendments/supplements (amendments/supplements to API 618).

DEP 31.29.40.32-Gen.

Rotary-type positive displacement compressors (amendments/supplements (amendments/supplements to API 619).

DEP 31.29.40.33-Gen.

Packaged, integrally geared, centrifugal plant and instrument air compressors (amendments/supplements (amendments/suppl ements to API 672).

DEP 31.29.40.34-Gen.

Packaged reciprocating gas compressors (amendments/supple (amendments/supplements ments to ISO 13631).

DEP 31.29.42.30-Gen.

Liquid ring vacuum pumps and compressors (amendments/supple (amendments/supplements ments to API STD 681).

DEP 31.29.47.30-Gen.

Centrifugal fans (amendments/suppl (amendments/supplements ements to ISO 13705, Annex E).

DEP 31.29.47.31-Gen.

Centrifugal fans for petroleum, chemical, and gas industry services (amendments/suppl (amendments/supplements ements to  API 673).

DEP 31.29.47.32-Gen.

Fans – Selection, testing and installation.

DEP 31.29.60.10-Gen.

Steam turbines - Selection, testing and installation.

DEP 31.29.60.30-Gen.

General-purpose steam turbines (amendments/supplements (amendments/supplements to API 611).

DEP 31.29.60.31-Gen.

Special-purpose steam turbines (amendments/supplements (amendments/supplements to ISO 10437).

DEP 31.29.60.32-Gen.

Lubrication, shaft-sealing and oil-control systems and auxiliaries (amendments/supplements (amendments/supplements to ISO 10438).

DEP 31.29.60.33-Gen.

Lubrication, shaft-sealing and oil-control systems – selection, testing, and installation.

DEP 31.29.70.11-Gen.

Combustion gas turbines - Selection, testing and installation.

DEP 31.29.70.31-Gen.

Gas turbines for the petroleum, chemical, and gas industry services (amendments/supplements (amendments/supplements to  API 616).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 17

DEP 31.29.70.32-Gen.

Gas turbine combustion air intake and exhaust systems.

DEP 31.29.80.30-Gen.

Diesel engines.

DEP 31.29.90.30-Gen.

Spark ignited gas fuelled engines.

DEP 31.51.10.31-Gen.

Side-entry mixers for storage tanks and vessels.

DEP 32.29.20.10-Gen.

Safeguarding and instrumented protective functions for rotating equipment.

DEP 37.29.01.10-Gen.

Firewater pumps for offshore installations.

17.

TELECOMS

DEP 32.71.00.10-Gen.

Plant telecommunication. telecommunication.

DEP 32.71.00.11-Gen.

Telecommunicati Telecommunications ons standards.

DEP 32.71.00.12-Gen.

Telecommunicat Telecommunications ions for offshore platforms.

DEP 32.71.00.13-Gen.

Drilling communications. communications.

DEP 32.71.00.14-Gen.

Telecommunicati Telecommunications ons towers and guyed masts.

DEP 32.71.00.16-Gen.

Design and installation of telephone cabling.

DEP 32.71.00.30-Gen.

Structured cabling systems for telecommunications. telecommunications.

DEP 32.71.00.31-Gen.

Microwave systems.

18.

UTILITIES & HEAT TRANSFER

DEP 20.05.50.10-Gen.

Heat transfer fluid systems.

DEP 20.05.60.10-Gen.

Fuel systems.

DEP 20.21.00.31-Gen.

Fouling margins in tubular heat exchanger design.

DEP 30.05.10.30-Gen.

Nitrogen/Oxygen supply and distribution systems.

DEP 30.75.10.10-Gen.

Steam, condensate and boiler feed water systems.

DEP 30.75.10.30-Gen.

Water-tube boilers.

DEP 30.75.10.31-Gen.

Gas turbine heat recovery steam generators.

DEP 31.10.11.31-Gen.

Gaseous oxygen systems.

DEP 31.21.01.11-Gen.

Printed circuit heat exchangers - Selection and application.

DEP 31.21.01.12-Gen.

Shell and tube heat exchangers; selection and application.

DEP 31.21.01.13-Gen.

Welded plate-bloc heat exchangers – Application, design and fabrication.

DEP 31.21.01.30-Gen.

Shell and tube heat exchangers (amendments/suppl (amendments/supplements ements to ISO 16812:2007).

DEP 31.21.01.32-Gen.

Plate and frame heat exchangers (amendments/suppl (amendments/supplements ements to ISO 15547-1:2005).

DEP 31.21.01.33-Gen.

Printed circuit heat exchangers – Design and fabrication.

DEP 31.21.01.34-Gen.

Brazed aluminium plate-fin heat exchangers (amendments/supplements (amendments/supplements to ISO 15547-2:2005).

DEP 31.21.01.36-Gen.

Heat exchangers for packaged equipment – Design and fabrication.

DEP 31.21.70.10-Gen.

Air-cooled heat exchangers; Selection and application.

DEP 31.21.70.31-Gen.

Air-cooled heat exchangers (amendments/supp (amendments/supplements lements to ISO 13706:2005).

DEP 31.24.00.30-Gen.

Fired heaters (amendments/supplements (amendments/supplements to ISO 13705).

DEP 31.27.21.30-Gen.

Dry electrostatic precipitators.

DEP 31.29.56.31-Gen.

Steam jet vacuum ejector sets.

DEP 31.37.00.11-Gen.

Instrument air supply.

DEP 32.24.20.44-Gen.

Instrumentation Control & Protection for Fired Equipment.

DEP 37.05.10.10-Gen.

Design of seawater systems for offshore and onshore.

DEP 37.05.10.11-Gen. DEP 80.45.11.12-Gen.

Diesel oil systems. Flare details (amendments/supp (amendments/supplements lements to ISO 25457).

 

ECCN EAR99

19.

DEP 00.00.05.05-Gen. February 2012 Page 18

WELLS WELL S ENGINEERING

DEP 38.80.10.30-Gen.

Drilling fluid materials - specifications specifications and tests (endorsement of ISO 13500).

DEP 38.80.10.31-Gen.

Field testing of drilling fluids - water-based fluids (endorsement of ISO 10414-1).

DEP 38.80.10.32-Gen.

Field testing of drilling fluids – Oil based fluids (amendments/supplements (amendments/supplements to ISO 10414-2).

DEP 38.80.10.33-Gen.

Measurement of viscous properties of completion fluids (endorsement of ISO 13503-1).

DEP 38.80.10.34-Gen.

Drilling fluids - Laboratory testing (endorsement of ISO 10416).

DEP 38.80.10.35-Gen.

Drilling fluid materials - Drilling fluids - Processing systems evaluation (endorsement of ISO 13501).

DEP 38.80.10.36-Gen.

Completion fluids and materials – Testing of heavy brines (endorsement of ISO 13503-3).

DEP 38.80.10.37-Gen.

Completion fluids and materials – Procedures for measuring the long-term conductivity of proppants (endorsement of ISO 13503-5).

DEP 38.80.10.38-Gen.

Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions (endorsement of ISO 13503-4).

DEP 38.80.10.39-Gen.

Completion fluids and materials – Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations (endorsement of ISO 13503-2).

DEP 38.80.20.30-Gen.

Specifications Specifications for cements and materials for well cementing (endorsement of ISO 10426-1).

DEP 38.80.20.31-Gen.

Testing of well cements (endorsement of ISO 10426-2).

DEP 38.80.20.32-Gen.

Performance testing of cementing float equipment (endorsement of ISO 10427-3).

DEP 38.80.20.33-Gen.

Bow-spring casing centralizers (endorsement of ISO 10427-1).

DEP 38.80.20.34-Gen.

Centraliser placement and stop-collar testing (endorsement of ISO 10427-2).

DEP 38.80.20.35-Gen.

Testing of deepwater well cement formulations (endorsement of ISO 10426-3).

DEP 38.80.20.36-Gen.

Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (endorsement of ISO 10426-5).

DEP 38.80.20.37-Gen.

Preparation and testing of foamed cement slurries at atmospheric pressure (endorsement of ISO 10426-4).

DEP 38.80.30.31-Gen.

Drilling and production hoisting equipment (endorsement of ISO 13535).

DEP 38.80.30.32-Gen.

Inspection, maintenance, repair and remanufacture of hoisting equipment (endorsement of ISO 13534).

DEP 38.80.30.33-Gen.

Drilling and well servicing equipment (endorsement of ISO 14693).

DEP 38.80.40.30-Gen.

Steel Drill pipe with weld-on tool joints (amendments/supplements (amendments/supplements to ISO 11961).

DEP 38.80.40.31-Gen.

Aluminium alloy drill pipe (endorsement of ISO 15546).

DEP 38.80.40.32-Gen.

Marine drilling riser couplings (endorsement of ISO 13625).

DEP 38.80.40.34-Gen.

Rotary drilling equipment – Threading and gauging of rotary shouldered thread connections (endorsement of ISO 10424-2).

DEP 38.80.50.30-Gen.

Drill-through equipment (endorsement of ISO 13533).

DEP 38.80.60.30-Gen.

Drilling of well servicing structures (endorsement of ISO 13626).

WS 39.01.20.12-Gen.

Casing and Tubing Design Manual; Volume 1 – Mandatory Requirements.

DEP 39.01.20.31-Gen.

Care and use of casing and tubing (endorsement of ISO 10405).

DEP 39.01.20.32-Gen.

Testing procedures for casing and tubing connections (endorsement of ISO 13679).

DEP 39.01.20.33-Gen.

Evaluation and testing of thread compounds for use with casing, tubing and line pipe (endorsement of ISO 13678).

DEP 39.01.20.34-Gen.

Field inspection of new casing, tubing and plain-end drill pipe (endorsement of ISO 15463).

DEP 39.01.30.30-Gen.

Wellhead and christmas tree equipment (amendments and supplements to ISO 10423).

DEP 39.01.30.31-Gen.

Downhole equipment - Sub-surface safety valves (endorsement of ISO 10432).

DEP 39.01.30.34-Gen.

Downhole Equipment - Packers and bridge plugs (endorsement of ISO 14310).

DEP 39.01.30.35-Gen.

Downhole Equipment - Lock mandrels and landing nipples (endorsement of ISO 16070).

DEP 39.01.30.36-Gen. DEP 39.01.30.38-Gen.

Downhole Equipment - Side-pocket mandrels (endorsement of ISO 17078-1). Downhole equipment Flow control devices for side-pocket mandrels (endorsement of ISO 17078- 2).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 19 ISO 17078- 2).

DEP 39.29.10.30-Gen.

Downhole equipment - Progressive cavity pumps for artificial lift (endorsement of ISO 15136-1).

DEP 39.29.10.31-Gen.

Downhole equipment – Progressive cavity pumps for artificial lift – Surface-drive systems (endorsement of ISO 15136-2).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 20

PART II NUMERICAL LISTING

Number

Date of Issue

Title

Custodian

DEP 00.00.00.30-Gen.

Feb. 2012

Procedure for global technical standards publications.

Sargent, Margaret A GSNL-PTE/DTST

DEP 00.00.05.05-Gen.

2012  Feb. 2012 

Global technical standards index.

Sargent, Margaret A GSNL-PTE/DTST

DEP 00.00.06.06-Gen.

Feb. 2012  2012 

Standard drawings index.

Sargent, Margaret A GSNL-PTE/DTST

DEP 00.00.07.07-Gen.

Withdrawn

Standard specification index.

DEP 00.00.07.10-Gen.

Sep. 2011

Design class tables.

Sargent, Margaret A GSNL-PTE/DTST

DEP 00.00.07.30-Gen.

Nov. 2006

Content and drafting of a functional specification, and a technical specification, and the classification of products, processes and services (endorsement of ISO 13879, ISO 13880 and ISO/TR 13881).

Blauvelt, Pieter N GSUSI-PTE/DTST

DEP 00.00.10.05-Gen.

Feb. 2012  2012 

Standard forms index.

Sargent, Margaret A GSNL-PTE/DTST

DEP 00.00.20.10-Gen.

Feb. 2011

The use of SI quantities and units (Endorsement of ISO/IEC 80000).

Sargent, Margaret A GSNL-PTE/DTST

DEP 00.30.10.05-Gen.

Withdrawn

Standard forms – Instrumentation binder (Standard Drawings 37.001 and 37.002).

DEP 01.00.01.30-Gen.

Feb. 2012

Definition of temperature, pressure and toxicity levels.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 01.00.02.11-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Preparation of process flow schemes and process engineering flow schemes.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 01.00.02.12-Gen.

Feb. 2011 (Feb. 2012 Circ.)  Circ.) 

Preparation of safeguarding memoranda and process safeguarding flow schemes.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 01.00.04.11-Gen.

Withdrawn

Preparation of simplified flow schemes.

DEP 01.00.09.10-Gen.

Feb. 2012

Operational tagging requirements.

Hessels, Frank J GSNL-PTE/EOEX

DEP 02.00.00.10-Gen.

Oct. 1995

Preparation and microfilming of technical drawings.

Blauvelt, Pieter N GSUSI-PTE/DTST

DEP 05.00.11.11-Gen.

Withdrawn

Time schedules and progress reporting for new construction projects.

DEP 05.00.51.84-Gen.

Withdrawn

Instrument engineering data sheet.

DEP 05.00.54.40-Gen.

Withdrawn

List of selected instrument equipment.

DEP 05.00.54.80-Gen.

Withdrawn

General purpose sheet (A4 size).

DEP 05.00.54.83-Gen.

Withdrawn

General puepose sheet (A3 size).

DEP 05.00.54.88-Gen.

Withdrawn

Summary of instrumentation documents and drawings.

DEP 05.00.54.89-Gen.

Withdrawn

Summary of instrumentation requisitions.

DEP 05.00.54.90-Gen.

Withdrawn

Summary of instrumentation cables.

DEP 05.00.55.12-Gen.

Withdrawn

Job instructions (G-5-1).

DEP 10.02.51.11-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Steam injection systems for safeguarding thermal cracking units.

DEP 20.00.10.10-Gen.

Withdrawn

Basic data and phase behaviour methods.

DEP 20.04.10.10-Gen.

Jan. 2005

Glycol-type gas dehydration systems.

Bowen, Christine GSNL-PTD/HPTS

Clouatre, Martyn A SEPCO-UAD/T/F

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 21

Number

Date of Issue

Title

Custodian

DEP 20.05.50.10-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Heat transfer fluid (HTF) systems.

Paul, Debnath GSMYPTE/PUHT

DEP 20.05.60.10-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Fuel systems.

Paul, Debnath GSMYPTE/PUHT

DEP 20.21.00.31-Gen.

Feb. 2011

Fouling margins in tubular heat exchanger design.

Stomierowski, Scott E GSUSI-PTE/AUHT

DEP 25.80.10.10-Gen.

Feb. 2012

Formation pressure prediction for development wells, appraisal wells and well entries/abandonments.

Maan, Anco C SUKEP-UIE/T/DPE

DEP 30.00.60.10-Gen.

Feb. 2011

Human factors engineering in projects.

Mcleod, Ron SI-SH

DEP 30.00.60.11-Gen.

Withdrawn

Human factors engineering - Summary of ISO standards.

DEP 30.00.60.12-Gen.

Nov. 2003

Human factors engineering - Investment  justification model. model.

DEP 30.00.60.13-Gen.

Sep. 2011

Human factors engineering – Valves.

Mcleod, Ron SI-SH

DEP 30.00.60.14-Gen.

Jan. 2005

Human factors engineering - Application during construction.

Mcleod, Ron SI-SH

DEP 30.00.60.15-Gen.

Feb. 2012

Human factors engineering - Control room design.

Mcleod, Ron SI-SH

DEP 30.00.60.16-Gen.

Aug. 2009

Human factors engineering Human/machine interface design for situation awareness.

Mcleod, Ron SI-SH

DEP 30.00.60.18-Gen.

Jan. 2010

Human factors engineering - Design and procurement of skid-packaged units.

Mcleod, Ron SI-SH

DEP 30.00.60.19-Gen.

Feb. 2011

Human factors engineering – Design for process safety critical tasks.

Mcleod, Ron SI-SH

DEP 30.00.60.20-Gen.

Sept 2011

Human factors engineering – Workspace design.

Mcleod, Ron SI-SH

DEP 30.00.60.21-Gen.

Feb. 2012

Human factors engineering – Labelling of facilities, equipment and piping.

Mcleod, Ron SI-SH

DEP 30.05.10.30-Gen.

Feb. 2012

Nitrogen/Oxygen supply and distribution systems.

Paul, Debnath GSMYPTE/PUHT

DEP 30.06.10.10-Gen.

Withdrawn

Introduction and physical properties and characteristics of LPG.

DEP 30.06.10.11-Gen.

Feb. 2011

Equipment in LPG installations.

Oldham, Steven R GSNL-PTD/THSC

DEP 30.06.10.12-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Pressurised bulk storage installations for LPG.

Oldham, Steven R GSNL-PTD/THSC

Feb. 2011

LPG bulk transfer and transportation.

Oldham, Steven R GSNL-PTD/THSC

DEP 30.06.10.13-Gen.

(Sep. 2011 Circ.)

Mcleod, Ron SI-SH

DEP 30.06.10.14-Gen.

Withdrawn

LPG – Cylinder filling and storage plants.

DEP 30.06.10.15-Gen.

Withdrawn

LPG – Cylinders and skid tanks Consumer equipment and installations installations..

DEP 30.06.10.18-Gen.

Feb. 2012

Pressurised bulk storage installations for LPG – at customer premises.

Oldham, Steven R GSNL-PTD/THSC

Feb. 2011

ESD systems for loading and discharging liquefied gas carriers.

Meiring, Wouter J GSNL-PTU/LF

DEP 30.06.10.20-Gen.

Circ.)  (Feb. 2012 Circ.)  RMP 30.06.10.50-Gen.

Sep. 2011

ESD systems for loading and discharging liquefied gas carriers – Operations and maintenance.

Meiring, Wouter J GSNL-PTU/LF

RMP 30.06.10.51-Gen.

Feb. 2011

Equipment for in LPG installations – Guidelines operation.

Oldham, Steven R GSNL-PTD/THSC

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 22

Number

Date of Issue

Title

Custodian

RMP 30.06.10.52-Gen.

Feb. 2011

Pressurised bulk storage installations for LPG.

Oldham, Steven R GSNL-PTD/THSC

RMP 30.06.10.53-Gen.

Feb. 2011

LPG bulk transfer and transportation.

Oldham, Steven R GSNL-PTD/THSC

DEP 30.06.11.11-Gen.

Withdrawn

Pressure storage facilities for LPG (30.06.10.12).

DEP 30.10.01.10-Gen.

Feb. 2012  2012 

Requisitions index.

Sargent, Margaret A GSNL-PTE/DTST

DEP 30.10.02.11-Gen.

Feb. 2012  2012 

Metallic materials - Selected standards.

Busch, Fred JM GSNL-PTE/EMMI

DEP 30.10.02.12-Gen

Withdrawn

Construction materials – Metallic materials for low temperature service.

DEP 30.10.02.13-Gen.

Feb. 2012  2012 

Non-metallic materials - Selection and application.

Busch, Fred JM GSNL-PTE/EMMI

DEP 30.10.02.14-Gen.

Feb. 2011 (Sep. 2011 Circ.) Circ.)  (Feb. 2012 Circ.) 

Carbon steel corrosion engineering manual for upstream facilities.

McFarland, Sam GSNL-PTE/EMMI

DEP 30.10.02.15-Gen.

Feb. 2012  2012 

Materials for use in H2S-containing environments in oil and gas production (amendments and supplements to ISO 15156:2009).

McFarland, Sam GSNL-PTE/EMMI

DEP 30.10.02.16-Gen.

Dec. 2009

Hydrogen induced cracking sensitivity test (amendments/supplements to NACE TM0284).

Mead, Hearl E GSUSIPTE/AMMI

DEP 30.10.02.17-Gen.

Feb. 2011

Wet H2S requirements for downstream pressure vessels and piping.

Johnson, Sean M GSUSI-PTE/AMMI

Metallic materials - Prevention of brittle fracture in new assets.

Mead, Hearl E GSUSIPTE/AMMI

Materials and fabrication requirements for 2¼Cr-1Mo, 2¼Cr-1Mo-¼V, 3Cr-1Mo & 3Cr-1Mo-¼V heavy wall pressure vessels (amendments/supplements to  API RP 934-A).

Yuen, Simon SCAIPTE/AMMI

Circ.)  (Feb. 2012 Circ.)  DEP 30.10.02.31-Gen.

Feb. 2011 (Sep. 2011 Circ.)

DEP 30.10.02.32-Gen.

Feb. 2011 (Feb. 2012 Circ.)  Circ.) 

RMP 30.10.02.50-Gen.

Feb. 2011

Metallic materials - Prevention of brittle fracture in existing assets.

Mead, Hearl E GSUSIPTE/AMMI

DEP 30.10.05.11-Gen.

Feb. 2012

Plant model construction and review.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 30.10.40.11-Gen.

Withdrawn

Jointing material.

DEP 30.10.60.10-Gen.

Withdrawn

Welding.

DEP 30.10.60.11-Gen.

Withdrawn

Standard welding terms and definitions.

DEP 30.10.60.12-Gen.

Withdrawn

Arc welding, cutting and gouging.

DEP 30.10.60.13-Gen.

Withdrawn

Gas welding, cutting and gouging.

DEP 30.10.60.18-Gen.

Feb. 2012

Welding of metals (amendments/supplements (amendments/supplem ents to  API RP 582).

DEP 30.10.60.19-Gen.

Withdrawn

Welding tubular goods, pressure vessels and storage tanks.

DEP 30.10.60.21-Gen.

Withdrawn

Testing of filler metals for welding.

DEP 30.10.60.22-Gen.

Withdrawn

Welding and inspection requirements for equipment not covered by recognized standards and/or codes.

DEP 30.10.60.30-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Welding on pressurisedents pipes (amendments/supplements (amendments/supplem to  API Standard 1104).

Yuen, Simon SCANPTE/AMMI

Guijt, Wim GSNLPTE/EPFA

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 23

Number

Date of Issue

Title

Custodian

DEP 30.10.60.31-Gen.

Dec. 1998

Oxidation of stainless steel weldments.

Yuen, Simon SCANPTE/AMMI

DEP 30.10.73.10-Gen.

Nov. 2003

Cathodic protection.

Whitworth, Jeff M SPLC-DSD/9244

DEP 30.10.73.31-Gen.

Sep. 2011

Design of cathodic protection systems for onshore buried pipelines (amendments/supplements (amendments/supplem ents to ISO 15589-1:2003).

Whitworth, Jeff M SPLC-DSD/9244

DEP 30.10.73.32-Gen.

Sep. 2011

Cathodic protection systems for Subsea pipelines and Hardware (amendments/supplements (amendments/supplem ents to  ANSI/NACE SP0607-2007/ISO SP0607-2007/ISO 15589-2).

Whitworth, Jeff M SPLC-DSD/9244

DEP 30.10.73.33-Gen.

Sep. 2011

Installation and commissioning commissioning of onshore cathodic protection systems.

Whitworth, Jeff M SPLC-DSD/9244

DEP 30.46.00.31-Gen.

Sep. 2011

Thermal insulation .

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

Circ.)  (Feb. 2012 Circ.)  DEP 30.46.00.32-Gen.

Withdrawn

Thermal insulation for cold and dualtemperature services ( Replaced by 30.46.00.31).

DEP 30.48.00.10-Gen.

Withdrawn

Painting and coating (Replaced by 30.48.00.31, 70.48.10.10).

DEP 30.48.00.31-Gen.

Jan. 2009

Protective coatings for onshore facilities.

Gomathan, Venkateswaraswamy PTIN-PTE/PMMI

DEP 30.48.00.32-Gen.

Feb. 2012

Coating of fasteners.

Kopp, Frans SIEPPTP/ADS

DEP 30.48.30.31-Gen.

Dec. 1998

Cement lining of pipes.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 30.48.40.31-Gen.

2012  Feb. 2012 

Thermal spray coatings of aluminium.

Morrison, Denby G SIEP-PTP/ADF

DEP 30.48.41.31-Gen.

Withdrawn

DEP 30.48.50.11-Gen.

Withdrawn

Requirements for PTFE lined piping (31.38.01.11).

DEP 30.48.50.12-Gen.

Withdrawn

Plastic-lined steel pipes and fittings (31.38.01.11).

DEP 30.48.50.31-Gen. DEP 30.48.50.32-Gen.

Withdrawn Withdrawn

PTFE coating of steel surfaces. Requirements for plastic-lined steel pipes and fittings (30.48.50.12).

DEP 30.48.60.10-Gen.

Aug. 2005

Rubber-lined process equipment.

Gomathan, Venkateswaraswamy PTIN-PTE/PMM

DEP 30.48.60.12-Gen.

Aug. 2000

Design and installation of chemicalresistant linings for concrete structures.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 30.48.60.13-Gen.

Apr. 2003

Design and installation of chemicalresistant brick lining for process equipment.

Wolfert, Ton GSNLPTE/EMMI

DEP 30.48.60.22-Gen.

Withdrawn

Installation of chemical-resis chemical-resistant tant linings for concrete structures (30.48.60.12).

DEP 30.48.60.23-Gen.

Withdrawn

Installation of chemical-resis chemical-resistant tant brick linings for process equipment (30.48.60.13).

DEP 30.48.60.30-Gen.

Withdrawn

Requirements for rubber linings for process equipment and piping (30.48.60.10).

Electroless nickel plating (amendments/supplements (amendments/supplem ents to  ASTM B 733).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 24

Number

Date of Issue

Title

DEP 30.48.60.33-Gen.

Withdrawn

Chemical-resistant (ceramic) lining Chemical-resistant materials (30.48.60.12).

DEP 30.48.60.34-Gen.

Withdrawn

Erosion resistant refractory linings (64.24.32.30).

DEP 30.48.70.30-Gen.

Withdrawn

Glass lined steel process equipment.

DEP 30.55.03.30-Gen

Feb. 2012

Validation of NDE for fabrication inspection.

Wang, David D GSUSI-PTE

DEP 30.75.10.10-Gen

Feb. 2012

Steam, condensate and boiler feed water systems.

Paul, Debnath GSMYPTE/PUHT

DEP 30.75.10.30-Gen.

Dec. 2008

Water-tube boilers.

Gouwerok, Leo PJ GSNL-PTE/EUHT

(Feb. 2012 Circ.)  Circ.) 

Custodian

DEP 30.75.10.31-Gen.

Feb. 2012  2012 

Gas turbine heat recovery steam generators.

Gouwerok, Leo PJ GSNL-PTE/EUHT

RMP 30.06.10.50-Gen.

Sep. 2011

ESD systems for loading and discharging liquefied gas carriers – Operations and maintenance.

Meiring, Wouter J GSNL-PTU/LF

DEP 31.01.10.10-Gen.

Feb. 2011

Chemical injection systems for upstream production facilities.

Leitko, Alan D GSUSIPTM/ASUR

Circ.)  (Feb. 2012 Circ.)  DEP 31.01.10.11-Gen

Feb. 2012

Corrosion prevention and control of water injection systems (EP).

Grimes, William D GSUSI-PTE/AMMI

DEP 31.06.11.11-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Loading facilities for bulk road vehicles.

Oldham, Steven R GSNL-PTD/THSC

DEP 31.06.11.12-Gen.

Withdrawn

Shell loading and discharging manuals – Loading facilities for bulk road vehicles – Part 2 – Design of top loading facilities (31.06.11.11).

DEP 31.06.11.13-Gen.

Withdrawn

Shell loading and discharging manuals – Loading facilities for bulk road vehicles – Part 3 – Design of bottom loading facilities (31.06.11.11).

DEP 31.06.11.14-Gen.

Withdrawn

Shell loading and discharging manuals – Loading facilities for bulk road vehicles – Part 4 – Ancillary equipment, services and site requirements (31.06.11.11).

DEP 31.06.12.11-Gen.

Withdrawn

Rail tank entu loading and discharging Part 1, Vol. 1: Selection, design and construction.

DEP 31.06.12.12-Gen.

Withdrawn

Rail tank entu loading and discharging Part 1, Vol. 2: Selection, design and construction.

DEP 31.06.12.13-Gen.

Withdrawn

Rail tank entu loading and discharging Part 2: Layouts, examples and drawings.

DEP 31.06.15.10-Gen.

Sep. 2010

Marine loading arms (amendments/ supplements to OCIMF design and construction specification for marine loading arms).

Veale, David GSNLPTE/ECSO

DEP 31.10.00.10-Gen.

Sep. 2011

Positive material identification (PMI) program.

Johnson, Sean M GSUSI-PTE/AMMI

DEP 31.10.00.31-Gen.

Feb. 2012

Noise control (amendments/supplements (amendments/supplements to ISO 15664).

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.10.03.10-Gen.

Feb. 2012

Symbols and identification system – Mechanical.

Kruijer, Alfred A GSNL-PTE/EMMI

Feb. 2011

Gaseous oxygen systems.

Hogenbirk, Ronald

DEP 31.10.11.31-Gen.

Circ.)  (Feb. 2012 Circ.) 

SEPI-PTP/BVM/P

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 25

Number

Date of Issue

Title

Custodian

RMP 31.10.11.50-Gen.

Feb. 2011

Gaseous oxygen systems – Guidelines for operation and maintenance.

Hogenbirk, Ronald SEPI-PTP/BVM/P

DEP 31.10.21.30-Gen.

Withdrawn

Bolt tensioning (70.08.10.11).

DEP 31.20.20.31-Gen.

Feb. 2012

Internals for columns.

DEP 31.21.00.19-Gen.

Withdrawn

Guide for the specification of shell-andtube heat exchangers (31.21.00.93).

DEP 31.21.01.11-Gen.

Feb. 2012

Printed circuit heat exchangers – Selection and application.

Stomierowski, Scott E GSUSI-PTE/AUHT

DEP 31.21.01.12-Gen.

Feb. 2012

Shell and tube heat exchangers; Selection and application.

Stomierowski, Scott E GSUSI-PTE/AUHT

DEP 31.21.01.13-Gen.

Feb. 2012

Welded plate-bloc heat exchangers –  Application, fabrication fabrication and design.

Stomierowski, Scott E GSUSI-PTE/AUHT

DEP 31.21.01.30-Gen.

Feb. 2011

Shell and tube heat exchangers (amendments/supplements (amendments/supplem ents to ISO 16812:2007).

Stomierowski, Scott E GSUSI-PTE/AUHT

(Feb. 2012 Circ.)  Circ.) 

Nooijen, Hans L GSNL-PTD/TDSE

DEP 31.21.01.31Gen.

Withdrawn

Selected construction materials for shelland-tube heat exchangers.

DEP 31.21.01.32-Gen.

Feb. 2012  2012 

Plate and frame heat exchangers (amendments/supplements (amendments/supplem ents to ISO 15547-1:2005).

Stomierowski, Scott E GSUSI-PTE/AUHT

DEP 31.21.01.33-Gen.

Feb. 2011

Printed circuit heat exchangers – Design and fabrication.

Stomierowski, Scott E GSUSI-PTE/AUHT

Brazed aluminium plate-fin heat exchangers (amendments/supplements (amendments/supplements to ISO 15547-2:2005).

Stomierowski, Scott E GSUSI-PTE/AUHT Stomierowski, Scott E GSUSI-PTE/AUHT

(Sep. 2011 Circ.) DEP 31.21.01.34-Gen.

Feb. 2011 (Sep. 2011 Circ.)

DEP 31.21.01.36-Gen.

Feb. 2012

Heat exchangers for packaged equipment – Design and fabrication.

DEP 31.21.20.31-Gen.

Withdrawn

Shell-and-tube heat exchangers with hotdip galvanized tubes.

DEP 31.21.70.10-Gen.

Feb. 2011

 Air-cooled heat exchangers; exchangers; Selection and application.

Stomierowski, Scott E GSUSI-PTE/AUHT

 Air-cooled heat exchangers exchangers (amendments/supplements (amendments/supplem ents to ISO 13706:2005).

Stomierowski, Scott E GSUSI-PTE/AUHT

(Sep. 2011 Circ.) DEP 31.21.70.31-Gen.

Feb. 2011 (Feb. 2012 Circ.)  Circ.) 

DEP 31.22.00.11-Gen

Withdrawn

Pressure vessels.

DEP 31.22.01.31-Gen.

Jan. 2005 (Feb. 2011 circ) (Feb. 2012 Circ.)  Circ.) 

Rotating disc contactors.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.22.05.11-Gen.

Feb. 2012

Gas/liquid separators – Type selection and design rules.

Nooijen, Hans L GSNL-PTD/TDSE

DEP 31.22.05.12-Gen.

Feb. 2012

Liquid/liquid and gas/liquid/liquid gas/liquid/liquid separators – Type selection and design rules.

Nooijen, Hans L GSNL-PTD/TDSE

DEP 31.22.10.31-Gen.

Withdrawn

Pressure vessels (amendments/supplements to BS 1515 (amendments/supplements Part 1).

DEP 31.22.10.32-Gen.

Feb. 2012

Pressure vessels (amendments/supplements (amendments/supplem ents to PD 5500).

DEP 31.22.10.33-Gen.

Withdrawn

Tolerances for pressure vessels (31.22.10.32).

DEP 31.22.10.34-Gen.

Withdrawn

Pressure vessels (amendments/supplements (amendments/supplem ents to AS 1210).

Yuen, Simon SCANPTE/AMMI

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 26

Number

Date of Issue

Title

Custodian

DEP 31.22.10.35-Gen.

Aug. 2005

Manufacturing report for pressure vessels.

Wylie, Tom P GSUSIPTE/AMMI

DEP 31.22.10.36-Gen.

Withdrawn

LPG storage vessels for aboveground storage of C3 and heavier hydrocarbons (30.06.10.12, 31.22.10.32).

DEP 31.22.11.32-Gen.

Feb. 2012

Unfired pressure vessels (amendments/supplements (amendments/supplem ents to EN 13445).

Yuen, Simon SCANPTE/AMMI

DEP 31.22.20.31-Gen.

Feb. 2012

Pressure vessels (based on  ASME section VIII). VIII).

Yuen, Simon SCANPTE/AMMI

DEP 31.22.30.14-Gen.

Aug. 2009

Glass-fibre reinforced plastic vessels.

DEP 31.22.30.24-Gen.

Withdrawn

Installation of glass-fibre reinforced epoxy vessels and equipment (31.22.30.14).

DEP 31.22.30.34-Gen.

Withdrawn

Glass-fibre reinforced epoxy and polyester vessels – manufacturing requirements (31.22.30.14).

DEP 31.22.31.31-Gen.

Feb. 2012

Pressure vessels (based on Chinese code GB 150-1998).

DEP 31.22.90.30-Gen.

Withdrawn

Seamless steel transportable gas containers (endorsement of BS 5045-1).

DEP 31.24.00.30-Gen.

Feb. 2011

Fired heaters (amendments/supplements (amendments/supplements to ISO 13705).

(Sep. 2011 Circ.) DEP 31.24.00.31-Gen.

Withdrawn

Calculation of heater-tube thickness (Endorsement of ISO 13704).

DEP 31.24.15.31-Gen.

Withdrawn

SIPM-type vertical furnaces, including waste heat boilers (31.24.00.30).

DEP 31.24.20.30-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – system for a single burner furnace (S 24.024 and S24.026).

DEP 31.24.20.33-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – System for an automatically started, gas fired, natural draught, multi burner furnace, safeguarded by pilot burners (S 24.033).

DEP 31.24.20.37-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – System for a manually started, forced draught, multi burner furnace or boiler (S 24.021).

DEP 31.24.20.38-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – System for an automatically automatically-started, -started, forced draught, multi-burner furnace or boiler (S 24.030 or S24.034).

DEP 31.24.20.40-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – system for a tangentially gas-fired CO boiler (S 24.036).

DEP 31.24.20.42-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – Systems for co-fired gas turbine waste heat recovery units.

DEP 31.24.40.12-Gen.

Nov. 2006

Fabric expansion joints (endorsement of RAL-GZ 719).

Janssen, Frans AH GSNL-PTI/GM

Yuen, Simon SCANPTE/AMMI

Gouwerok, Leo PJ GSNL-PTE/EUHT

Coit, William G GSUSI-PTE/AMMI??

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 27

Number

Date of Issue

Title

Custodian

DEP 31.24.40.31-Gen.

Feb. 2012

Materials for high-temperature conversion process furnace parts.

Johnson, Sean M GSUSI-PTE/AMMI

DEP 31.24.49.31-Gen.

Nov. 2006 (Feb. 2011 circ)

Fabrication of heater piping.

Yuen, Simon SCANPTE/AMMI

DEP 31.24.66.11-Gen.

Withdrawn

Mobile ignition unit for furnaces and

DEP 31.24.66.12-Gen.

Withdrawn

steam boilers. Mobile ignition unit for LMV line burners of sulphur recovery units.

DEP 31.25.00.10-Gen.

Nov. 2008

Hoisting facilities and weather protection for rotating equipment.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.27.00.20-Gen.

Feb. 2012

Design and supply of bulk solid bins and hoppers.

Giles, Steve P SIEPPTI/GF

DEP 31.27.00.21-Gen.

Feb. 2012

Vibrating fluid bed drier/cooler systems.

Giles, Steve P SIEPPTI/GF

DEP 31.27.00.22-Gen.

Feb. 2012

Enclosed drag conveyors.

Giles, Steve P SIEPPTI/GF

DEP 31.27.00.23-Gen.

Feb. 2012

General purpose screw conveyors.

Giles, Steve P SIEPPTI/GF

DEP 31.27.00.24-Gen.

Feb. 2012

Loss-in-weight feeders.

Giles, Steve P SIEPPTI/GF

DEP 31.27.00.25-Gen.

Feb. 2012

Pressure process filters and systems – Technology selection, design and manufacture.

Giles, Steve P SIEPPTI/GF

DEP 31.27.21.10-Gen.

Feb. 2012  2012 

Filters for removing particles from hydroprocesser feeds – Type selection and design rules.

Yang, Guoqiang SIEPPTI/GF

DEP 31.27.21.30-Gen.

Nov. 2003

Dry electrostatic precipitators.

Miller, Allen C GSUSIPTE/AUHT

DEP 31.29.00.10-Gen.

Sep. 2011

Installation of rotating equipment (amendments/supplements to (amendments/supplements  API RP 686).

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.00.11-Gen.

Dec. 2009 Circ.)  (Feb. 2012 Circ.) 

Condition monitoring of rotating equipment.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.00.30-Gen.

Jul. 2008

Oil mist lubrication systems.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.00.31-Gen.

Withdrawn

Noise limitation (31.10.00.31).

DEP 31.29.00.32-Gen.

Feb. 2012  2012 

Special purpose gear units for petroleum, chemical and gas industry services (amendments/supplements (amendments/supplem ents to API 613).

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.00.33-Gen.

Feb. 2011

Shaft sealing systems for centrifugal and rotary pumps (amendments/supplements (amendments/supplements to ISO 21049:2004).

Clarke, Jonathan F GSNL-PTE/EREQ

(Sep. 2011 Circ.) DEP 31.29.00.34-Gen.

Withdrawn

Dry gas seal systems for centrifugal compressors (31.29.40.10 and 31.29.60.32).

DEP 31.29.00.36-Gen.

Dec. 2007

Flexible couplings for mechanical power transmission – Special purpose applications (amendments/ supplements to ISO 10441).

Diehl, Robert J GSUSI-PTE/AREQ

DEP 31.29.00.38-Gen.

Sep. 2011

General purpose gear units (amendments/supplements to API 677). (amendments/supplements

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.00.39-Gen.

Feb. 2011

Shaft sealing systems for centrifugal and rotary pumps – Selection, testing and

Clarke, Jonathan F GSNL-PTE/EREQ

installation.

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 28

Number

Date of Issue

Title

Custodian

DEP 31.29.00.41-Gen.

Feb. 2012

Gears – Selection, testing and installation.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.01.10-Gen.

Withdrawn

Pumps.

DEP 31.29.02.10-Gen.

Withdrawn

Pumps – Centrifugal.

DEP 31.29.02.11-Gen.

Feb. 2011

Pumps – selection, testing and installation.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.02.30-Gen.

Feb. 2011

Centrifugal pumps (amendments/supplements (amendments/supplem ents to ISO 13709).

Clarke, Jonathan F GSNL-PTE/EREQ Clarke, Jonathan F GSNL-PTE/EREQ

(Sep. 2011 Circ.) DEP 31.29.02.31-Gen.

Dec. 2009

Sealless centrifugal pumps for petroleum, heavy duty chemical, and gas industry services (amendments/supplements (amendments/supplem ents to API 685).

DEP 31.29.05.31-Gen.

Withdrawn

Vertical in-line centrifugal pumps.

DEP 31.29.06.30-Gen.

Feb. 2011

Centrifugal submerged motor pumps and electro-submersible hydraulic turbines.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.06.31-Gen.

Feb. 2012

Seawater lift pumps.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.12.10-Gen.

Withdrawn

Pumps – Reciprocating.

DEP 31.29.12.30-Gen.

Dec. 1999

Reciprocating positive displacement pumps and metering pumps (amendments/supplements (amendments/supplem ents to API 674 and API 675).

DEP 31.29.22.10-Gen.

Withdrawn

Pumps – Rotary (Positive Displacemen Displacement). t).

DEP 31.29.22.11-Gen.

Feb. 2012

Positive displacement pumps – Rotary (amendments/supplements to API 676). (amendments/supplements

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.40.10-Gen.

Sep. 2011

Compressors – Selection, testing and installation.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.40.30-Gen.

Feb. 2011

 Axial, centrifugal centrifugal and expander compressors (amendments/supplements (amendments/supplements to API Std 617).

Clarke, Jonathan F GSNL-PTE/EREQ

Reciprocating compressors (amendments/supplements (amendments/supplem ents to API 618).

Clarke, Jonathan F GSNL-PTE/EREQ

Rotary-type positive displacement compressors (amendments/supplements (amendments/supplements to API 619).

Clarke, Jonathan F GSNL-PTE/EREQ

(Sep. 2011 Circ.) DEP 31.29.40.31-Gen.

Feb. 2011 (Sep. 2011 Circ.)

DEP 31.29.40.32-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.40.33-Gen.

Feb. 2012  2012 

Packaged, integrally geared, centrifugal plant and instrument air compressors (amendments/supplements (amendments/supplem ents to API 672).

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.40.34-Gen.

2012  Feb. 2012 

Packaged reciprocating gas compressors (amendments/supplements (amendments/supplem ents to ISO 13631).

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.42.30-Gen.

Feb. 2012  2012 

Liquid ring vacuum pumps and compressors (amendments/supplements (amendments/supplements to API STD 681).

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.47.30-Gen.

Sep. 2011

Centrifugal fans (amendments/supplements to (amendments/supplements ISO 13705, Annex E).

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.47.31-Gen.

Feb. 2012

Centrifugal fans for petroleum, chemical and gas industry services (amendments/supplements (amendments/supplem ents to API 673).

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.47.32-Gen.

Feb. 2012

Fans – Selection, testing and installation.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.56.31-Gen.

Sep. 2010

Steam jet vacuum ejector sets.

Stomierowski, Scott E GSUSI-PTE/EUHT

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 29

Number

Date of Issue

Title

Custodian

DEP 31.29.60.10-Gen.

Sep. 2011

Steam turbines – Selection, testing and installation.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.60.30-Gen.

Feb. 2011

General-purpose steam turbines (amendments/supplements to API 611). (amendments/supplements

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.60.31-Gen.

Feb. 2011

Special-purpose steam turbines

Clarke, Jonathan F

(Sep. 2011 Circ.)

(amendments/supplements (amendments/supplem ents to ISO 10437).

GSNL-PTE/EREQ

Feb. 2011

Lubrication, shaft-sealing and control oil systems and auxiliaries (amendments/supplements (amendments/supplem ents to ISO 10438).

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.60.32-Gen.

(Sep. 2011 Circ.)

DEP 31.29.60.33-Gen.

Sep. 2011

Lubrication, shaft-sealing and oil-control systems – selection, testing, and installation.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.70.11-Gen.

Sep. 2011

Combustion gas turbines – Selection, testing and installation.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.70.31-Gen.

Feb. 2011

Gas turbines for petroleum, chemical and gas industry services (amendments/supplements (amendments/supplem ents to API 616).

Clarke, Jonathan F GSNL-PTE/EREQ

(Sep. 2011 Circ.) DEP 31.29.70.32-Gen.

Feb. 2011

Gas turbine combustion air intake and exhaust systems.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.80.30-Gen.

Dec. 2000

Diesel engines.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.29.90.30-Gen.

Mar. 2001

Spark ignited gas fuelled engines.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.36.00.30-Gen.

Feb. 2012  2012 

Pipeline transportation systems – Pipeline valves (amendments/supplements (amendments/supplem ents to ISO 14313).

Guijt, Wim GSNLPTE/EPFA

DEP 31.36.10.30-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Hydraulic systems for the operation of on/off valves in protective functions.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.37.00.11-Gen.

Feb. 2012

Instrument air supply.

Paul, Debnath GSMYPTE/PUHT

DEP 31.38.01.10-Gen.

Feb. 2012

Piping classes – Basis of design.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.38.01.11-Gen.

Feb. 2012

Piping – General requirements.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.38.01.12-Gen.

Feb. 2012

Piping classes – Refining and chemicals.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.38.01.13-Gen.

Feb. 2012

Compilation of bill of material for piping isometrics.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.38.01.15-Gen.

Feb. 2012

Piping classes – Exploration and production . 

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.38.01.16-Gen.

Withdrawn

Fabrication and installation of polyethylene and polypropylene piping.

DEP 31.38.01.17-Gen.

Withdrawn

Fabrication and installation of PVC piping.

DEP 31.38.01.18-Gen.

Withdrawn

Fabrication and installation of glassreinforced epoxy piping.

Feb. 2011

Water injection in Downstream hydroprocessing units for corrosion control.

Fan, Deyuan SIEPPTI/GM

DEP 31.38.01.19-Gen.

(Feb. 2012 Circ.)  DEP 31.38.01.21-Gen.

Sep. 2011

Compilation of a specification for piping systems.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.38.01.29-Gen.

Feb. 2012

Pipe supports.

Kruijer, Alfred A

 

ECCN EAR99

Number

DEP 00.00.05.05-Gen. February 2012 Page 30

Date of Issue

Title

Custodian

GSNL-PTE/EMMI DEP 31.38.01.31-Gen.

Feb. 2012

Shop and field fabrication of piping.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.38.30.11-Gen.

Feb. 2012

Protective steam heating of piping systems (non-electrical).

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.38.60.10-Gen.

Feb. 2011 (Sep. 2011 Circ.) 

Hot-tapping on pipelines, piping and equipment.

Simons, Servie JM GSNL-PTE/EPFA

DEP 31.38.70.21-Gen.

Withdrawn

Installation of PVC piping.

DEP 31.38.70.22-Gen.

Withdrawn

Installation of PE piping.

DEP 31.38.70.23-Gen.

Withdrawn

Installation of PP piping.

DEP 31.38.70.24-Gen.

Withdrawn

Design and installation of glass-fibre reinforced epoxy and polyester piping (31.40.10.19).

DEP 31.38.70.25-Gen.

Withdrawn

Fabrication and installation of thermoplastics piping systems (31.38.01.11).

DEP 31.38.70.31-Gen.

Withdrawn

Requirements for PVC pipes and fittings.

DEP 31.38.70.32-Gen.

Withdrawn

Requirements for PE pipes and fittings.

DEP 31.38.70.33-Gen.

Withdrawn

Requirements for PP pipes and fittings.

DEP 31.38.70.34-Gen.

Withdrawn

Requirements for glass-fibre reinforced epoxy pipes and fittings (31.38.70.37).

DEP 31.38.70.35-Gen.

Withdrawn

Requirements for glass-fibre reinforced polyester pipes and fittings (31.38.70.37).

DEP 31.38.70.36-Gen.

Withdrawn

Requirements for thermoplastics pipes and fittings (31.38.01.11).

DEP 31.38.70.37-Gen.

Withdrawn

Requirements for glass-fibre reinforced epoxy and polyester pipes and fittings (31.40.10.19).

DEP 31.38.82.31-Gen.

Withdrawn

PTFE bellows.

DEP 31.38.85.93-Gen.

Withdrawn

Valves (Flanged/butt-welded).

DEP 31.38.85.94-Gen.

Withdrawn

Ball valves to API 6D.

DEP 31.38.86.93-Gen.

Withdrawn

Valve (Class 800/1500).

DEP 31.38.87.93-Gen.

Withdrawn

Bronze valves (Threading: NPT).

DEP 31.40.00.10-Gen.

Feb. 2011 (Sep. 2011 Circ.) 

Pipeline engineering ents to ISO (amendments/supplements (amendments/supplem 13623:2009).

DEP 31.40.00.11-Gen.

Withdrawn 

Pipeline integrity.

DEP 31.40.00.19-Gen.

Withdrawn

Corrosion mitigation strategy for wet sour gas carbon steel pipelines.

Yuen, Simon SCANPTE/AMMI

RMP 31.40.00.50-Gen.

Sep. 2011

Corrosion mitigation strategy for wet sour gas carbon steel pipelines.

Yuen, Simon SCAIPTE/AMMI

RMP 31.40.00.51-Gen.

Feb. 2012

Pipeline integrity.

Simons, Servie JM GSNL-PTE/EPFA   GSNL-PTE/EPFA

DEP 31.40.10.10-Gen.

Sep. 2011

Riser design.

Simons, Servie JM GSNL-PTE/EPFA

Design of multiple-pipe slug catchers.

Simons, Servie JM GSNL-PTE/EPFA

Design of pipeline pig trap systems.

Simons, Servie JM

(Feb. 2012 Circ.)  DEP 31.40.10.12-Gen.

Feb. 2011 (Feb. 2012 Circ.) 

DEP 31.40.10.13-Gen.

Feb. 2011

DEP 31.40.10.14-Gen.

(Sep. 2011 Circ.)  Withdrawn

Guijt, Wim GSNLPTE/EPFA

GSNL-PTE/EPFA Pipeline overpressure protection.

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 31

Number

Date of Issue

Title

Custodian

DEP 31.40.10.15-Gen.

Dec. 2007

Analysis of spans for submerged pipelines.

Simons, Servie JM GSNL-PTE/EPFA

DEP 31.40.10.16-Gen.

Apr. 2006

Upheaval buckling of pipelines.

Simons, Servie JM GSNL-PTE/EPFA

DEP 31.40.10.17-Gen.

Apr. 2006

Pipeline/trawlg Pipeline/trawlgear ear interaction.

Simons, Servie JM

DEP 31.40.10.18-Gen.

Feb. 2011 

Pipeline engineering – Reliability-based Reliability-based limit states methods (amendments/supplements (amendments/supplem ents to ISO 16708).

DEP 31.40.10.19-Gen.

Feb. 2011 (Feb. 2012 Circ.) 

Glass-fibre reinforced plastic pipeline and piping systems.

Janssen, Frans AH GSNL-PTI/GM

DEP 31.40.10.20-Gen.

Aug. 2005

Spoolable fibre-reinforced plastic pipes.

Janssen, Frans AH GSNL-PTI/GM

DEP 31.40.10.22-Gen.

Feb. 2012

Top tension riser tensioning systems.

Morrison, Denby G SIEP-PTP/ADF

RMP 31.40.10.50-Gen.

Sep. 2011

Glass-fibre reinforced plastic pipeline and piping systems – Maintenance and repair.

Janssen, Frans AH GSNL-PTI/GM

DEP 31.40.11.32-Gen.

Sep. 2011

Pipelay survey, positioning and as-built reportings for offshore pipelines.

Kopp, Frans SIEPPTP/ADS

DEP 31.40.10.31-Gen.

Withdrawn

Glass fibre reinforced plastic pipes and fittings (amendments/supplements to  API Spec 15HR) (31.40.10.19). (31.40.10.19).

DEP 31.40.20.30-Gen.

Withdrawn

Linepipe for use in oil and gas operations under non-sour conditions (amendments/supplements (amendments/supplem ents to  API Spec 5L) (31.40.20.35, (31.40.20.35, 31.40.20.37).

DEP 31.40.20.31-Gen.

Withdrawn

Linepipe for use in oil and gas operations under sour conditions (amendments/supplements (amendments/supplem ents to  API Spec 5L) (31.40.20.35, (31.40.20.35, 31.40.20.37).

DEP 31.40.20.32-Gen.

Sep. 2011

CRA clad or CRA-lined steel pipe (amendments/supplements to (amendments/supplements  API Spec 5LD).

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.20.33-Gen.

Feb. 2011

Linepipe induction bends (amendments/supplements (amendments/supplem ents to ISO 15590-1).

Guijt, Wim GSNLPTE/EPFA

Paterson, Steve J SUKEP-UIE/P/SDD

(Sep. 2011 Circ.) (Feb. 2012 Circ.) 

GSNL-PTE/EPFA Guijt, Wim GSNLPTE/EPFA

DEP 31.40.20.34-Gen.

Feb. 2011 (Sep. 2011 Circ.) 

Welded and seamless duplex and super duplex stainless steel line pipe (amendments/supplements (amendments/supplem ents to  API Spec 5LC).

DEP 31.40.20.35-Gen.

Withdrawn

Linepipe for non-critical service (amendments/supplements to (amendments/supplements ISO 3183-1).

DEP 31.40.20.36-Gen.

Feb. 2011

Weldable martensitic stainless steel line pipe for use in oil and gas operations (amendments/supplements (amendments/supplem ents to  API spec 5LC).

Kopp, Frans SIEPPTP/ADS

(Feb. 2012 Circ.) 

DEP 31.40.20.37-Gen.

Feb. 2011 (Sep. 2011 Circ.) 

Line pipe for critical service (amendments/supplements (amendments/supplem ents to ISO 3183:2007).

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.20.39-Gen.

Feb. 2012

High density polyethylene pipelines and piping systems for oilfield applications.

Yuen, Simon SCAIPTE/AMMI

DEP 31.40.21.30-Gen.

Jun. 2007

Pipeline fittings (amendments/supplements to (amendments/supplements ISO 15590-2).

Jarvie, Tom SIEPPTP/ADS

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 32

Number

Date of Issue

Title

Custodian

DEP 31.40.21.31-Gen.

Sep. 2011

Pipeline isolating joints (amendments/supplements to (amendments/supplements ISO 15590-2:2003).

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.21.32-Gen.

Withdrawn

Pig trap end closures (amendments/supplements to (amendments/supplements MSS SP-75) (31.40.10.13).

DEP 31.40.21.33-Gen.

Sep. 2011

Pig signalers – intrusive type.

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.21.34-Gen.

Jun. 2007

Carbon and low alloy steel pipeline flanges for use in oil and gas operations (amendments/supplements (amendments/supplem ents to ISO 15590-3).

Jarvie, Tom SIEPPTP/ADS

DEP 31.40.21.37-Gen.

Feb. 2012

Corrosion resistant alloy overlay subsea pipe and fittings excluding line pipe.

Kopp, Frans SIEPPTM/ASUR

DEP 31.40.30.30-Gen.

Feb. 2012  2012 

Concrete coating of linepipe (amendments/supplements (amendments/supplem ents to ISO 21809-5).

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.30.31-Gen.

Feb. 2011 

External polyethylene and polypropylene coating for line pipe (amendments/supplements (amendments/supplem ents to ISO/DIS 21809-1:2009).

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.30.32-Gen.

Feb. 2011 

External fusion-bonded epoxy powder

Guijt, Wim GSNL-

coating for line pipe (amendments/supplements (amendments/supplem ents to ISO 21809-2:2007).

PTE/EPFA

DEP 31.40.30.33-Gen.

Oct. 2001

Bituminous enamel coating of steel linepipe.

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.30.34-Gen.

Dec. 1999

Thermoplastic lined pipelines.

Coit, William G GSUSI-PTE/AMMI??

DEP 31.40.30.35-Gen.

Dec. 2005

Internal coating of line pipe for noncorrosive gas transmission service (amendments/supplements (amendments/supplem ents to ISO 15741).

Kopp, Frans SIEPPTM/ASUR

DEP 31.40.30.36-Gen.

Dec. 2007

Elastomer coatings and monel sheathing for offshore riser protection.

Kopp, Frans SIEPPTM/ASUR

DEP 31.40.30.37-Gen.

Jan. 2008

External field joint and rehabilitation coating systems for line pipe.

Kopp, Frans SIEPPTM/ASUR

DEP 31.40.30.38-Gen.

Withdrawn

Liquid rehabilitation coating of onshore pipelines (31.40.30.37).

DEP 31.40.30.39-Gen.

Feb. 2012

Internal fusion-bonded epoxy powdercoating for water injection line pipe.

Kopp, Frans SIEPPTM/ASUR

DEP 31.40.40.38-Gen.

Feb. 2011 (Sep. 2011 Circ.) 

Hydrostatic pressure testing of new pipelines.

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.50.30-Gen.

Sep. 2011

Precommission Precommissioning ing of pipelines.

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.60.11-Gen.

Sep. 2002

Pipeline leak detection.

Simons, Servie JM GSNL-PTE/EPFA

DEP 31.40.60.12-Gen.

Withdrawn

Pipeline repairs.

RMP 31.40.60.50-Gen.

Feb. 2011 

Pipeline repairs.

Guijt, Wim GSNLPTE/EPFA

DEP 31.40.70.30-Gen.

Feb. 2011

Quarter-turn actuators for on/off valves.

Mooi, Peter GSNLPTE/EPAC

(Sep. 2011 Circ.)  DEP 31.41.10.30-Gen.

Withdrawn

Steel pipe for use as casing or tubing for wells (amendments/supplements to ISO 11960).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 33

Number

Date of Issue

Title

Custodian

DEP 31.46.00.31-Gen.

2012  Feb. 2012 

Acoustic insulation for piping (amendments/supplements (amendments/supplem ents to ISO 15665).

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.51.10.31-Gen.

Sep. 2011

Side-entry mixers for storage tanks and vessels.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 31.76.10.10-Gen.

Jul. 1998

Heating, ventilation and air conditioning for plant buildings.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 31.76.10.11-Gen.

Apr. 2006

Installation, testing and balancing, and commissioning of HVAC systems. commissioning

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 32.00.00.10-Gen.

Withdrawn

The division of responsibilities between instrument and electrical engineering disciplines.

DEP 32.00.00.11-Gen.

Withdrawn

Human-machine interface in a control room (30.00.60.15, 32.80.10.14).

DEP 32.00.00.12-Gen.

Dec. 2008

Fiscal and sales allocation models for upstream production systems.

DEP 32.01.20.10-Gen.

Withdrawn

Data acquisition and control architecture (DACA).

DEP 32.01.20.12-Gen.

Feb. 2012

Process Control Domain – Enterprise industrial automation information technology and security.

Dehler, Glenn SCAIPTE/APAC

RMP 32.01.20.50-Gen.

Feb. 2012

Process Control Domain – Enterprise industrial automation information technology and security.

Dehler, Glenn SCAIPTE/APAC

DEP 32.01.21.10-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Roles and responsibilities.

DEP 32.01.22.10-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Procedural controls – Configuration management.

DEP 32.01.22.11-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Procedural controls – Backup and restore.

DEP 32.01.22.12-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Procedural controls – Incident management.

DEP 32.01.22.13-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Procedural controls – Disconnection procedure.

DEP 32.01.23.10-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Technical controls – Security administration.

DEP 32.01.23.11-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Technical controls – Infrastructure architecture.

DEP 32.01.23.12-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Technical controls – Remote user access.

DEP 32.01.23.13-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Technical controls – Wireless security.

DEP 32.01.23.14-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Technical controls – Minimal access.

DEP 32.01.23.15-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Technical controls –  Authentication and authorisation.

Mooi, Peter GSNLPTE/EPAC

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 34

Number

Date of Issue

Title

Custodian

DEP 32.01.23.17-Gen.

Feb. 2011 

Process control domain – Security requirements for suppliers.

Dehler, Glenn SCAIPTE/APAC

DEP 32.01.23.18-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Technical controls – PCD network drawings.

Withdrawn

DEP 32.01.23.19-Gen.

Data acquisition & control architecture (DACA) – Technical controls –  Architectural requirements requirements for applications utilizing production data.

DEP 32.01.25.10-Gen.

Withdrawn

Data acquisition and control architecture (DACA) – System security – Virus management.

DEP 32.01.25.11-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – System security – Patch management.

DEP 32.01.26.11-Gen.

Withdrawn

Data acquisition & control architecture (DACA) – Assurance – Risk assessment.

DEP 32.01.40.31-Gen.

Feb. 2012

Requirements for real-time production operations and production-critical realtime data

DEP 32.10.00.10-Gen.

Withdrawn

Instrumentation.

DEP 32.10.03.10-Gen.

Feb. 2011 

Instrument symbols and identification on process engineering flow schemes.

DEP 32.10.03.11-Gen.

Withdrawn

Symbols and identification system – Instrumentation. Part 2: -Functional logic diagrams (32.10.03.10).

DEP 32.10.03.12-Gen.

Withdrawn

Symbols and identification system – Instrumentation. Part 3: -Instrumentation loop diagrams (32.10.03.10).

DEP 32.24.20.30-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – System for a single-burner furnace (S 24.024 and S 24.026).

DEP 32.24.20.33-Gen.

Withdrawn

Control system and instrument protective functions for fired equipment System for an automatically started, gas fired, natural draught, multi-burner furnace, safeguarded by pilot burners (S 24.033).

DEP 32.24.20.37-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – System for a manually-started, forced draught, multi-burner furnace or boiler (S 24.021).

DEP 32.24.20.38-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – System for an automatically automatically-started, -started, forced draught, multi-burner furnace or boiler (S 24.030 or S 24.034).

DEP 32.24.20.40-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – System for a tangentially gas-fired CO boiler (S 24.036).

DEP 32.24.20.42-Gen.

Withdrawn

Control system and instrumented protective functions for fired equipment – Systems for Co-fired gas turbine waste heat recovery units.

DEP 32.24.20.44-Gen.

Feb. 2012 

Instrumentation control and protection for fired equipment.

Berendschot, Leo GSUSI-PTT/EPRO

Nicol, Robert M GSUK-PTE/EPAC

Gouwerok, Leo JP GSNL-PTE/EUHT

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 35

Number

Date of Issue

Title

Custodian

DEP 32.29.20.10-Gen.

Feb. 2011 (Sep. 2011 Circ.) 

Safeguarding and instrumented protective functions for rotating equipment.

Clarke, Jonathan F GSNL-PTE/EREQ

DEP 32.30.10.30-Gen.

Withdrawn

System cabinets.

DEP 32.30.20.11-Gen.

Sep. 2011

Fire, gas and smoke detection systems.

(Feb. 2012 Circ.) 

Nicol, Robert M GSUK-PTE/EPAC

DEP 32.30.20.13-Gen.

Sep. 2011

FOUNDATION™ Fieldbus – Design and configuration.

Gul, Rong P GSNLPTE/EPAC

DEP 32.30.20.14-Gen.

Feb. 2012

Instrument asset management.

Gul, Rong P GSNLPTE/EPAC

DEP 32.30.20.15-Gen.

Sep. 2011

DCS basic application standards.

Williamson, John M GSUSI-GSEL

DEP 32.30.20.16-Gen.

Sep. 2011

Baselayer control applications.

Williamson, John M GSUSI-GSEL

DEP 32.30.20.17-Gen.

Feb. 2012

Integration of motor controls into BPCS.

Whitaker, Robert D GSUSI-PTE/APAC

RMP 32.30.20.50-Gen.

Feb. 2011

Fire, gas and smoke detection systems.

Nicol, Robert M GSUK-PTE/EPAC

DEP 32.31.00.10-Gen.

Withdrawn

Instrument engineering procedures.

DEP 32.31.00.32-Gen.

Feb. 2011

Instruments for measurement and

Mooi, Peter GSNL-

(Sep. 2011 Circ.) (Feb. 2012 Circ.)  Circ.) 

control.

PTE/EPAC

DEP 32.31.00.34-Gen.

Sep. 2011

Instrumentation documents and drawings.

Nicol, Robert M GSUK-PTE/EPAC

DEP 32.31.09.31-Gen.

Sep. 2011

Instrumentation for equipment packages.

Mooi, Peter GSNLPTE/EPAC

(Feb. 2012 Circ.)  Circ.)  DEP 32.31.31.30-Gen.

Withdrawn

Signal light assemblies assemblies..

DEP 32.31.50.10-Gen.

Jan. 2010

On-line process analysers.

DEP 32.31.50.11-Gen.

Withdrawn

On-line process stream analysis – Sample conditioning (32.31.50.10).

DEP 32.31.50.12-Gen.

Withdrawn

On-line process stream analysis –  Analysers (32.31.50.10). (32.31.50.10).

DEP 32.31.50.13-Gen.

Jan. 2010

Analyser housing.

DEP 32.31.50.31-Gen.

Withdrawn

On-line process stream analysers.

DEP 32.31.56.30-Gen.

Sep. 2011

Implementation of near-infrared systems for main fuels blending.

van Duyn, Marcel O GSNL-PTD/TASE

DEP 32.32.00.11-Gen.

Sep. 2002

Turbine fiscal metering systems for liquid hydrocarbons.

Mooi, Peter GSNLPTE/EPAC

DEP 32.32.00.12-Gen.

Jun. 2007

Fiscal flow measurement of natural gas.

Mooi, Peter GSNLPTE/EPAC

DEP 32.32.00.13-Gen.

Jul. 2008

Flow rate measurement in wet gas environments by means of venturi tubes and tracer dilution technology.

Mooi, Peter GSNLPTE/EPAC

DEP 32.32.10.10-Gen.

Withdrawn

Flow instruments (32.31.00.32).

DEP 32.32.11.45-Gen.

Withdrawn

Sizing form for square edge orifices with corner tappings.

DEP 32.32.11.46-Gen.

Withdrawn

Sizing form for square edge orifices with radius tappings.

DEP 32.32.11.47-Gen.

Withdrawn

Sizing form for quarter of circle orifices with flange tappings.

Mooi, Peter GSNLPTE/EPAC

Mooi, Peter GSNLPTE/EPAC

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 36

Number

Date of Issue

Title

DEP 32.32.11.48-Gen.

Withdrawn

Sizing form for conical entrance orifices with corner tappings.

DEP 32.32.11.49-Gen.

Withdrawn

Sizing form for Venturi tubes (A, B and C).

DEP 32.32.11.50-Gen.

Withdrawn

Sizing form for rectangular Venturi tubes.

DEP 32.32.11.51-Gen.

Withdrawn

Sizing form ISA 1932 nozzles.

DEP 32.32.11.52-Gen.

Withdrawn

Sizing form for long radius nozzles.

DEP 32.32.11.53-Gen.

Withdrawn

Flow factor calculation form for square edge orifices with flange tappings.

DEP 32.32.11.60-Gen.

Withdrawn

Flow factor calculation form for square edge orifices with corner tappings.

DEP 32.32.11.61-Gen.

Withdrawn

Flow factor calculation form for square edge orifices with radius tappings.

DEP 32.32.11.62-Gen.

Withdrawn

Flow factor calculation form for quarter of a circle orifices with flange tappings.

DEP 32.32.11.63-Gen.

Withdrawn

Flow factor calculation form for conical entrance orifices with corner tappings.

DEP 32.32.11.64-Gen.

Withdrawn

Flow factor calculation form for Venturi tubes (A,B and C).

DEP 32.32.11.65-Gen.

Withdrawn

Flow factor calculation form for rectangular Venturi tubes.

DEP 32.32.11.66-Gen.

Withdrawn

Flow factor calculation form for ISA 1932 nozzles.

DEP 32.32.11.67-Gen.

Withdrawn

Flow factor calculation form for long radius nozzles.

DEP 32.32.11.81-Gen.

Withdrawn

Sizing form for square edge orifices with flange tappings.

DEP 32.35.00.10-Gen.

Withdrawn

Reference tables for thermocouples.

DEP 32.35.00.20-Gen.

Withdrawn

Reference tables for resistance thermometers.

DEP 32.36.00.31-Gen.

Withdrawn

Selection and specification of final control elements.

DEP 32.36.01.11-Gen.

Withdrawn

Sizing of control valves.

DEP 32.36.01.15-Gen.

Withdrawn

Control valve noise.

DEP 32.36.01.16-Gen. DEP 32.36.01.17-Gen.

Withdrawn Feb. 2011

Sizing of control valves (32.36.01.17). Control valves – Selection, sizing and specification.

(Sep. 2011 Circ) Circ.)  (Feb. 2012 Circ.)  DEP 32.36.01.41-Gen.

Withdrawn

Control valve calculation form: Compressible fluids.

DEP 32.36.01.42-Gen.

Withdrawn

Control valve calculation form: Incompressible fluids.

DEP 32.37.00.31-Gen.

Withdrawn

Installation of instruments.

DEP 32.37.00.33-Gen.

Withdrawn

Mounting of plant instruments (32.31.00.32).

DEP 32.37.00.80-Gen.

Withdrawn

Summary of instrument process connections.

DEP 32.37.02.80-Gen.

Withdrawn

Summary of instrument installation materials.

DEP 32.37.02.81-Gen.

Withdrawn

Instrument impulse lines “Metric version”.

Custodian

Mooi, Peter GSNLPTE/EPAC

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 37

Number

Date of Issue

Title

DEP 32.37.02.82-Gen.

Withdrawn

Instrument impulse lines “Imperial version”.

DEP 32.37.02.83-Gen.

Withdrawn

Instrument air lines.

DEP 32.37.02.84-Gen.

Withdrawn

Instrument nameplates.

DEP 32.37.10.11-Gen.

Feb. 2011

Installation of on-line instruments.

(Feb. 2012 Circ.)  Circ.) 

Custodian

Mooi, Peter GSNLPTE/EPAC

DEP 32.37.10.31-Gen.

Withdrawn

Prefabricated instrument consoles.

DEP 32.37.10.34-Gen.

Withdrawn

Instrument nameplates (32.31.00.32).

DEP 32.37.20.10-Gen.

Sep. 2011

Instrument signal lines.

DEP 32.37.20.31-Gen.

Withdrawn

System cabling (32.37.20.10).

DEP 32.37.51.11-Gen.

Withdrawn

Instrument air lines (31.37.00.11).

DEP 32.45.10.10-Gen.

Feb. 2011

Instrumentation of depressuring systems.

Jirathunyawg, Akachai PTIN-PTE/PPAC

(Sep. 2011 Circ.)

Znotins, Andy SCAIPTE/APAC

RMP 32.45.10.50-Gen.

Feb. 2011

Instrumentation of depressuring systems.

Jirathunyawg, Akachai PTIN-PTE/PPAC

DEP 32.71.00.10-Gen.

Feb. 2011

Plant telecommunication. telecommunication.

Roy, Prosad PTINPTE/PPAC

(Sep. 2011 Circ.) DEP 32.71.00.11-Gen.

May 2004

Telecommunication Telecommunication standards.

Quartel, Ronald SIEPITUI/IJ

DEP 32.71.00.12-Gen.

Apr. 1993

Telecommunica Telecommunications tions for offshore platforms.

Quartel, Ronald SIEPITUI/IJ

DEP 32.71.00.13-Gen.

O Oct. ct. 1995

Drilling communications. communications.

Quartel, Ronald SIEPITUI/IJ

DEP 32.71.00.14-Gen.

Dec. 2008

Telecommunica Telecommunications tions towers and guyed masts.

Quartel, Ronald SIEPITUI/IJ

DEP 32.71.00.16-Gen.

Dec. 1997

Design and installation of telephone cabling.

Quartel, Ronald SIEPITUI/IJ

DEP 32.71.00.30-Gen.

Dec. 1998

Structured cabling systems for telecommunications.

Quartel, Ronald SIEPITUI/IJ

DEP 32.71.00.31-Gen.

Dec. 1997

Microwave systems.

Quartel, Ronald SIEPITUI/IJ

DEP 32.80.10.10-Gen.

Feb. 2011

Instrumented protective functions (IPF).

Jirathunyawg, Akachai PTIN-PTE/PPAC

DEP 32.80.10.11-Gen.

(Sep. 2011 Circ.) Withdrawn

DEP 32.80.10.12-Gen.

Withdrawn

Management of instrumented protective functions.

DEP 32.80.10.13-Gen.

Withdrawn

High integrity pressure protecting systems (HIPPS SIL-4).

DEP 32.80.10.14-Gen.

Feb. 2011

 Alarm management.

Implementation of instrumented protective functions class X.

(Sep. 2011 Circ.) DEP 32.80.10.30-Gen.

Withdrawn

Instrumented protective systems.

RMP 32.80.10.50-Gen.

Feb. 2011

The operation, testing and maintenance of instrumented protective functions (IPF).

DEP 33.00.20.11-Gen

Withdrawn

Electrical supply systems.

DEP 33.10.03.10-Gen.

Withdrawn

Symbols and identification system –

DEP 33.10.04.11-Gen

Withdrawn

Electrical (S 64.000). Comparison of electrical codes.

Teeuw, Casper GSNLPTE/EPAC

Jirathunyawg, Akachai PTIN-PTE/PPAC

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 38

Number

Date of Issue

Title

DEP 33.10.64.11-Gen

Withdrawn

Transistor-type signal light assemblies.

DEP 33.10.64.12-Gen

Withdrawn

Electrical signaling devices.

DEP 33.10.79.11-Gen

Withdrawn

Emergency electricity supply for lighting and instrumentation.

DEP 33.64.10.10-Gen.

Feb. 2011

Electrical engineering design.

DEP 33.64.10.11-Gen.

Withdrawn

Electrical network monitoring and control system for industrial networks –  Application.

DEP 33.64.10.12-Gen.

Sep. 2011

Electrical supply and generation – Design and operation.

Donnellan, Paul J GSNL-PTE/EELE

DEP 33.64.10.17-Gen.

Sep. 2011

Application of protective functions for electrical systems.

de Wilt, Wim GSNLPTE/EELE

DEP 33.64.10.30-Gen.

Withdrawn

Electric power and lighting installations (33.64.10.10).

DEP 33.64.10.32-Gen.

Sep. 2011

Electrical network monitoring and control system for industrial networks.

Donnellan, Paul J GSNL-PTE/EELE

DEP 33.64.10.33-Gen.

Sep. 2010

Electromagnetic compatibility (EMC).

de Wilt, Wim GSNLPTE/EELE

Feb. 2011

Electrical engineering design for North

de Wilt, Wim GSNL-

Circ.)  (Feb. 2012 Circ.) 

 American application. application.

PTE/EELE

DEP 33.64.30.30-Gen.

Sep. 2011

Electrical packaged equipment requirements for North American application.

de Wilt, Wim GSNLPTE/EELE

DEP 33.65.11.31-Gen.

Feb. 2012

Synchronous AC machines (amendments/supplements (amendments/supplem ents to IEC 60034-1 and IEC 60034-14).

Donnellan, Paul J GSNL-PTE/EELE

DEP 33.65.11.32-Gen.

Apr. 2003

Packaged unit AC generator sets.

Donnellan, Paul J GSNL-PTE/EELE

DEP 33.65.11.34-Gen.

2012  Feb. 2012 

Synchronous AC machines for North  American application application (amendments/supplements (amendments/supplem ents to API 546).

de Wilt, Wim GSNLPTE/EELE

DEP 33.65.40.31-Gen.

Sep. 2011

Power transformers (amendments/supplements (amendments/supplem ents to IEC 60076-1 and IEC 60076-11).

Donnellan, Paul J GSNL-PTE/EELE

DEP 33.65.40.32-Gen.

Sep. 2011

Liquid-immerse Liquid-immersed d transformers for North

de Wilt, Wim GSNL-

 American application. application.

PTE/EELE

DEP 33.65.50.31-Gen.

Feb. 2011

Static DC uninterruptible power supply (DC UPS) units.

de Wilt, Wim GSNLPTE/EELE

DEP 33.65.50.32-Gen.

Feb. 2011

Static A.C. uninterruptible power supply unit (static A.C. UPS unit).

de Wilt, Wim GSNLPTE/EELE

DEP 33.65.50.33-Gen.

Feb. 2012

Design and fabrication of AC uninterruptible power supplies for North  American application. application.

de Wilt, Wim GSNLPTE/EELE

DEP 33.65.50.34-Gen.

Feb. 2012

Design and fabrication of DC uninterruptible power supplies for North  American application. application.

de Wilt, Wim GSNLPTE/EELE

DEP 33.65.60.30-Gen.

Feb. 2012  2012 

Solar power systems.

Donnellan, Paul J GSNL-PTE/EELE

DEP 33.66.05.10-Gen.

Withdrawn

Engineering guidelines variable speed drive systems (technique and applications).

DEP 33.66.05.31-Gen.

Feb. 2012  2012 

Electrical machines – Cage-induction types (amendments/supplements to IEC 60034-1 and IEC 60034-14).

Circ.)  (Feb. 2012 Circ.)  DEP 33.64.20.10-Gen.

Custodian

de Wilt, Wim GSNLPTE/EELE

de Wilt, Wim GSNLPTE/EELE

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 39

Number

Date of Issue

Title

Custodian

DEP 33.66.05.33-Gen.

2012  Feb. 2012 

A.C. electrical variable speed drive systems.

de Wilt, Wim GSNLPTE/EELE

DEP 33.66.05.35-Gen.

Sep. 2011

LV induction motors for North American application(Amendments/supplements to application(Amendments/supplements IEEE STD 841).

de Wilt, Wim GSNLPTE/EELE

DEP 33.66.05.36-Gen.

Feb. 2012  2012 

MV induction motors for North Americanto application (amendments/supplements  API 541).

de Wilt, Wim GSNLPTE/EELE

DEP 33.66.05.37-Gen.

Sep. 2011

General-purpose form-wound squirrel cage induction motors – 250 horsepower and larger for North American application (amendments/supplements (amendments/supplem ents to API 547).

Barrios, Louis GSUSI-PTE/AELE

DEP 33.66.05.38-Gen.

Sep. 2011

Design and fabrication of MV motor control centres for North American application (amendments to UL 347/CAS C22.2 No. 253-09).

de Wilt, Wim GSNL

DEP 33.66.05.39-Gen.

Feb. 2012

Design and fabrication of low voltage motor control centres for North American application (amendments to UL 845 / CAS C22.2 No. 254-05).

de Wilt, Wim GSNL

DEP 33.67.01.31-Gen.

Feb. 2011

Low voltage switchgear and controlgear assemblies (amendments/suppl (amendments/supplements ements to IEC 60439).

de Wilt, Wim GSNLPTE/EELE

DEP 33.67.01.32-Gen.

Sep. 2011

Design and fabrication of LV switchgear for North American applications.

de Wilt, Wim GSNL

Design and fabrication of MV switchgear for North American applications.

de Wilt, Wim GSNL

(Feb. 2012 Circ.)  Circ.)  DEP 33.67.40.30-Gen.

Sep. 2011 Circ.)  (Feb. 2012 Circ.) 

DEP 33.67.51.31-Gen.

Feb. 2012

High-voltage switchgear and controlgear assemblies for rated voltages between 1 kV and 52 kV (amendments/supplements to IEC 62271-200).

de Wilt, Wim GSNLPTE/EELE

DEP 33.68.30.31-Gen.

Oct. 2001

Electrical heating system for frost heave prevention of refrigerated hydrocarbon storage tanks.

Donnellan, Paul J GSNL-PTE/EELE

DEP 33.68.30.32-Gen.

Sep. 2010

Electrical trace heating.

de Wilt, Wim GSNLPTE/EELE

DEP 33.68.30.33-Gen.

Nov. 2006

Electrical process heaters.

Donnellan, Paul J GSNL-PTE/EELE

DEP 33.80.00.30-Gen.

Feb. 2011 Circ.)  (Feb. 2012 Circ.) 

Navigational aids for offshore structures.

de Wilt, Wim GSNLPTE/EELE

DEP 34.00.01.10-Gen.

Feb. 2011

Earthquake design for onshore facilities – Seismic hazard assessment.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

(Sep. 2011 Circ.) (Feb. 2012 Circ.)  Circ.)  DEP 34.00.01.30-Gen.

Sep. 2011

Structural design and engineering of onshore structures.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.11.00.10-Gen.

Sep. 2011

Onshore & Nearshore Site investigations investigations..

Hospers, Bareld SIEP-PTE/ECSO

DEP 34.11.00.11-Gen.

Sep. 2011

Site preparation and earthworks including tank foundations and tank farms.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.11.00.12-Gen.

Feb. 2011

Geotechnical and foundation engineering  – Onshore.

Hospers, Bareld SIEP-PTE/ECSO

Roads, paving, surfacing, cable trenches, slope protection and fencing.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

(Sep 2011 Circ.) Circ.)  (Feb. 2012 Circ.)  DEP 34.13.20.31-Gen.

Sep. 2011

A

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 40

Number

Date of Issue

Title

Custodian

DEP 34.14.20.31-Gen.

Feb. 2011 (Sep. 2011 Circ.)

Drainage systems and primary treatment facilities.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.17.00.32-Gen.

Sep. 2011

Design and engineering of buildings.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.17.10.30-Gen.

Feb. 2012

Design of blast resistant onshore

Kruijsen, Ton ATJJM

buildings, control rooms and field auxiliary rooms.

GSNL-PTE/ECSO

DEP 34.17.10.31-Gen.

Apr. 2006

Laboratories.

Keller, Ruud W GSNLPTD/TASE

DEP 34.17.10.33-Gen.

Feb. 2011

Portable blast-resistant modules.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

(Sep. 2011 Circ.) (Feb. 2012 Circ.)  Circ.)  DEP 34.17.10.34-Gen.

Jan. 2008

Mobile camps – Civil site assessments.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.17.10.35-Gen.

Feb. 2011

Siting of onshore occupied portable buildings.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 34.17.10.36-Gen.

Feb. 2012

Inflatable blast resistant shelters.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 34.18.02.31-Gen

Withdrawn

Piling.

DEP 34.18.51.10-Gen.

Withdrawn

Minimum requirements for the construction of tank foundations, and bundmaintenance walls and drainage systems for small storage installations (34.11.00.11).

DEP 34.19.19.11-Gen.

Sep. 2011

Grouting of equipment and structure bases.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.19.20.11-Gen.

Feb. 2011 (Feb. 2012 Circ.)  Circ.) 

Passive fire protection for onshore facilities.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.19.20.31-Gen.

Sep. 2011

Reinforced concrete structures.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.19.61.11-Gen

Withdrawn

Chemical-resistant Chemical-resis tant linings for concrete structures.

DEP 34.24.26.31-Gen.

Apr. 2003

Steel stacks (amendments/supplements (amendments/supplements to CICIND Model Code).

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.24.27.31-Gen.

Apr. 2006

Reinforced concrete stacks.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.28.00.31-Gen.

Sep. 2011

Onshore Steel structures.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 34.28.00.33-Gen.

Sep. 2011

Onshore ancillary steel structures.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

Circ.)  (Feb. 2012 Circ.)  DEP 34.28.90.11-Gen

Withdrawn

Fireproofing of steel structures

DEP 34.51.00.11-Gen.

Withdrawn

Standard tanks.

Feb. 2011 Circ.)  (Feb. 2012 Circ.) 

Vertical steel storage tanks - Selection design and construction (amendments/supplements (amendments/supplem ents to EN 14015).

Yuen, Simon SCAIPTE/AMMI

Feb. 2011

Full containment refrigerated LNG tanks.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

Aboveground vertical storage tanks (amendments/supplements (amendments/supplem ents to

Yuen, Simon SCANPTE/AMMI

DEP 34.51.01.31-Gen.

DEP 34.51.01.32-Gen.

(Sep. 2011 Circ.) Circ.)  (Feb. 2012 Circ.)  DEP 34.51.01.33-Gen.

2012  Feb. 2012 

DEP 34.51.01.34-Gen.

Feb. 2012

 API Standard 650). Full containment refrigerated LPG tanks.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 41

Number

Date of Issue

Title

Custodian

DEP 34.51.11.30-Gen.

Feb. 2011

Mounded horizontal cylindrical vessels for pressurised storage of LPG at ambient temperatures (amendments/supplements (amendments/supplem ents to EEMUA 190).

Yuen, Simon SCANPTE/AMMI

DEP 34.51.90.10-Gen.

Apr. 2006

Demolition of storage tanks

Yuen, Simon SCAN-

(endorsement of EEMUA 154).

PTE/AMMI

DEP 34.76.30.31-Gen.

Withdrawn

Heating and air conditioning in substations and switch houses (31.76.10.10).

DEP 35.00.00.10-Gen.

Feb. 2012

Vessel integrity, marine systems – Requirements for selection and operation of vessels (Endorsement of DNV RP-H104).

Morrison, Denby G SIEP –PTP/ADF

DEP 35.00.10.10-Gen.

Feb. 2007

Design of jetty facilities (amendments/supplements to (amendments/supplements BS 6349-1/2/4).

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 37.00.10.10-Gen.

Feb. 2011

Metocean design and operating considerations (endorsement of ISO 19901-1:2005).

Vogel, Michael J GSUSI-PTE/ACSO

DEP 37.00.10.11-Gen.

Feb. 2012

Metocean data acquisition - Definition, implementation and analysis.

Vogel, Michael J GSUSI-PTE/ACSO

DEP 37.00.10.12-Gen.

Feb. 2012

Metocean systems. data acquisition - Real time

Vogel, Michael J GSUSI-PTE/ACSO

DEP 37.01.10.10-Gen.

Feb. 2011

Offshore production installations basic surface process safety systems.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 37.01.10.11-Gen.

Feb. 2011

Design of offshore topsides facilities against fire and blast loading (amendments/supplements (amendments/supplem ents to  API RP-2FB).

Rhodes Terry C SUKEP-UIE /T/PE

(Sep. 2011 Circ.)

Design of sea water systems for offshore and onshore.

Paul, Debnath GSMYPTE/PUHT

DEP 37.05.10.11-Gen.

Feb. 2012  2012 

Diesel oil systems.

Paul, Debnath GSMYPTE/PUHT

DEP 37.05.10.12-Gen.

Aug. 2000

Design of hose bulk transfer facilities for offshore installations.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

DEP 37.11.00.30-Gen.

Feb. 2011 Circ.)  (Feb. 2012 Circ.) 

Site specific assessment of mobile offshore jack-up units.

Hospers, Bareld SIEP-PTE/ECSO

Feb. 2011

Drain systems for offshore installations.

Kruijsen, Ton ATJJM GSNL-PTE/ECSO

Circ.)  (Feb. 2012 Circ.) 

DEP 37.05.10.10-Gen.

DEP 37.14.10.10-Gen.

Feb. 2011

(Feb. 2012 Circ.)  Circ.)  DEP 37.17.10.10-Gen.

Jul. 2008

Design of offshore living quarters.

Rhodes Terry C SUKEP-UIE /T/PE

DEP 37.17.10.11-Gen.

Jan. 2011

Design of offshore temporary refuges.

Rhodes Terry C SUKEP-UIE /T/PE

(Sep. 2011 Circ.) (Feb. 2012 Circ.)  Circ.)  DEP 37.19.00.10-Gen.

Feb. 2011

Offshore structures - General requirements (endorsement of ISO 19900).

Rhodes Terry C SUKEP-UIE /T/PE

DEP 37.19.00.12-Gen.

Feb. 2012

Offshore topside structures (amendments/supplements to (amendments/supplements ISO 19901-3:2010).

Rhodes Terry C SUKEP-UIE /T/PE

DEP 37.19.00.30-Gen.

Feb. 2011

Fixed steel offshore structures (amendments/supplements (amendments/supplem ents to ISO 19902:2007).

Rhodes Terry C SUKEP-UIE /T/PE

Circ.)  (Feb. 2012 Circ.) 

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 42

Number

Date of Issue

Title

Custodian

DEP 37.19.10.30-Gen.

Sep. 2011

Weldable structural steels for fixed offshore structures (amendments/supplements (amendments/supplem ents to EN 10225 and EN 10025).

Rhodes Terry C SUKEP-UIE /T/PE

DWS 37.19.20.11-Gen.

Sep. 2011

Weight management plan for floating platforms (amendments/supplements to ISO 19901-5).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.19.30.30-Gen.

Sep. 2011

Cathodic protection systems for fixed offshore steel structures (amendments/supplements (amendments/supplem ents to NACE SP0176-2007).

Whitworth, Jeff M SPLC-DSD/9244

DEP 37.19.60.10-Gen.

Withdrawn

Structural inspection of offshore installations.

RMP 37.19.60.50-Gen.

Feb. 2011

Structural inspection of offshore installations.

Rhodes Terry C SUKEP-UIE /T/PE

Feb. 2011

Firewater pumps for offshore installations.

Clarke, Jonathan F GSNL-PTE/EREQ

HVAC for offshore installations (amendments/supplements (amendments/supplem ents to ISO 15138).

Kruijer, Alfred A GSNL-PTE/EMMI

Design and operation of subsea production systems (based on

Still, Ian RW SIEPPTP/ADS

DEP 37.29.01.10-Gen.

Circ.)  (Feb. 2012 Circ.)  DEP 37.76.10.10-Gen.

Feb. 2011 Circ.)  (Feb. 2012 Circ.) 

DEP 37.80.00.30-Gen.

Sep. 2010

ISO 13628). DEP 37.80.00.31-Gen.

Withdrawn

Design and operation of subsea production systems – General requirements and recommendations (endorsement of ISO 13628-1).

DEP 37.80.00.33-Gen.

Sep. 2010

Design and operation of subsea production control systems (amendments/supplements (amendments/supplem ents to ISO 13628-6).

Still, Ian RW SIEPPTP/ADS

DEP 37.80.00.36-Gen.

Sep. 2011

Deepwater subsea vertical tree systems (amendments/supplements to (amendments/supplements ISO 13628-4).

Still, Ian RW SIEPPTP/ADS

DEP 37.80.00.38-Gen.

Sep. 2011

Deepwater jumper design, measurement, fabrication and testing.

Still, Ian RW SIEPPTP/ADS

DEP 37.80.01.31-Gen.

Withdrawn

Design and operation of subsea production systems – Unbonded flexible pipe systems for subsea and marine applications (endorsement of ISO 13628-2).

DEP 37.80.01.32-Gen.

Withdrawn

Design and operation of subsea production systems – Through flowline (TFL) systems (endorsement of ISO 13628-3).

DEP 37.80.01.33-Gen.

Withdrawn

Design and operation of subsea production systems – Subsea umbilicals (endorsement of ISO 13628-5).

DEP 37.80.01.34-Gen.

Withdrawn

Design and operation of subsea production systems – Specification for bonded flexible pipe (endorsement of ISO 13628-10).

DEP 37.80.01.35-Gen.

Withdrawn

Design and operation of subsea production systems – Flexible pipe systems for subsea and marine applications (endorsement of ISO 13628-11).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 43

Number

Date of Issue

Title

DEP 37.80.01.36-Gen.

Withdrawn

Design and operation of subsea production systems – Dynamic production risers (endorsement of ISO 13628-12).

DEP 37.80.02.31-Gen.

Feb. 2011

Seamless Super Duplex Tubing Manufacturing Specification for Deepwater Umbilicals and Subsea Distribution Hardware.

Still, Ian RW SIEPPTP/ADS

DEP 37.80.02.32-Gen.

Sep. 2011

Seam Welded Super Duplex Tubing Manufacturing Specification for Umbilicals and Subsea Distribution Hardware.

Von Tungeln, Robert K SIEP-PTP/ADS

DEP 37.80.02.33-Gen.

Feb. 2011

Zinc clad duplex tubing manufacturing specification.

Still, Ian RW SIEPPTP/ADS

DEP 37.80.02.35-Gen.

Feb. 2011

Medium voltage, 6kV (Um = 7.2kV) to 30kV (Um = 36kV), power conductors for deepwater umbilicals.

Still, Ian RW SIEPPTP/ADS

DEP 37.80.02.36-Gen.

Sep. 2011

Deepwater Umbilical Manufacturing (amendments/supplements to (amendments/supplements ISO 13628-5: 2002).

Still, Ian RW SIEPPTP/ADS

DEP 37.80.02.37-Gen.

Feb. 2011

Deepwater Subsea Controls, Power, and Chemical Distribution Manufacturing Specification.

Still, Ian RW SIEPPTP/ADS

DEP 37.80.02.38-Gen.

Withdrawn

Umbilical topside termination and interface equipment.

DEP 37.80.03.30-Gen.

Sep. 2011

Umbilical transportation and installation (amendments/supplements (amendments/supplem ents to ISO 13628-5: 2002).

Still, Ian RW SIEPPTP/ADS

(Feb. 2012 Circ.)  Circ.) 

Custodian

DEP 37.80.03.31-Gen.

Sep. 2011

Deepwater subsea distribution hardware installation.

Still, Ian RW SIEPPTP/ADS

DEP 37.80.10.30-Gen.

Sep. 2011

Deepwater subsea completion/workover completion/workover systems (amendments/supplements to ISO 13628-7).

La Caze, David A SIEP-PTP/ADS

DEP 37.81.10.10-Gen.

Feb. 2011

Generic design and analysis for steel catenary risers and catenary umbilical systems for offshore structures.

Morrison, Denby G SIEP-PTP/ADF

Design and analysis of top tension risers for deepwater offshore floating structures (based on API RP 2RD/

Morrison, Denby G SIEP-PTP/ADF

Circ.)  (Feb. 2012 Circ.)  DWS 37.81.10.11-Gen.

Feb. 2012

DEP 37.81.10.12-Gen.

Sep. 2011

DEP 37.81.10.14-Gen.

Sep. 2011

Global design and analysis of deepwater tension leg platforms (amendments/supplements (amendments/supplem ents to  API RP-2T).

Morrison, Denby G SIEP-PTP/ADF

DWS 37.81.10.18-Gen.

Sep. 2011

Design specification specification for deepwater tension leg platform, semisubmersible semisubmersible and spar hull (based on API RP 2T and  API RP 2FPS).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.10.19-Gen.

Sep. 2011

Marine operations requirements loadout, transportation and installation deepwater structures (amendments/supplements (amendments/supplem ents to ISO 19901-6 or API RP 2MOP).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.10.20-Gen.

Sep. 2011

Design of pile foundations tension legdriven platforms (based on for  API RP 2T).

Morrison, Denby G SIEP-PTP/ADF

ISO WD 13628-12). Design of anchor piles for deepwater mooring systems (based on API RP 2SK).

Morrison, Denby G SIEP-PTP/ADF

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 44

Number

Date of Issue

Title

Custodian

DEP 37.81.10.21-Gen.

Sep. 2011

Structural design of tendon systems for deepwater offshore tension leg platforms (amendments/supplements (amendments/supplem ents to  API RP 2T).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.10.31-Gen.

Sep. 2011

Structural steel design of small deepwater offshore skids, facility packages, and subsea sleds and manifolds (based on AISC Steel Construction Manual ASD,  API RP 2A-WSD and AWS AWS D1.1).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.10.32-Gen.

Sep. 2011

Structural steel fabrication of small deepwater offshore skids, facility packages, and subsea sleds and manifolds (based on AISC Steel Construction Manual ASD,  API RP 2A-WSD and AWS AWS D1.1).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.10.33-Gen.

Sep. 2011

Structural welding and inspection of deepwater floating production systems (amendments/supplements (amendments/supplem ents to  AWS D1.1/D1.1M:2008). D1.1/D1.1M:2008).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.10.34-Gen.

Feb. 2011

Structural fabrication of deepwater floating production systems (based on  API RP 2FPS).

Morrison, Denby G SIEP-PTP/ADF

DWS 37.81.10.36-Gen.

Sep. 2011

Structural steel design of deepwater offshore topsides decks for floating systems.

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.10.37-Gen

Withdrawn

Recommended practice for SIEP-EPP Designed structural steel topsides decks for deepwater offshore floating systems (based on AISC Steel construction manualASD, API RP 2A-WSD, and  AWS D1.1).

DEP 37.81.20.31-Gen.

Sep. 2011

Galvanic anodes for marine structures and pipelines – Specification and qualification – Modifications to ISO 15589-2.

Whitworth, Jeff M SPLC-DSD/9244

DWS 37.81.20.35-Gen.

Feb. 2011

Technical specification for elastomeric flexible joints for use in deepwater offshore dynamic riser applications.

Morrison, Denby G SIEP-PTP/ADF

(Sep. 2011 Circ.) (Feb. 2012 Circ.)  Circ.)  DEP 37.81.20.36-Gen

Feb. 2012

Syntactic foam buoyancy modules for use in deepwater offshore dynamic riser r iser applications .

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.20.40-Gen.

Sep. 2011

Impressed current laboratory testing of aluminum alloy anodes (amendments/supplements (amendments/supplem ents to NACE STD TM0190-2006).

Whitworth, Jeff M SPLC-DSD/9244

DEP 37.81.21.30-Gen

Feb. 2012

Manufacturing, testing and inspection of permanent mooring system chain and accessories for floating structures (based on DNV-OS-E302).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.21.31-Gen

Feb. 2012

Permanent mooring system wire rope, sockets, pins and connectors for deepwater floating structures (based on DNV-OS-E304).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.21.35-Gen

Feb. 2012

General requirements for top tensioned riser tendon and mooring equipment for deepwater floating production systems.

Morrison, Denby G SIEP-PTP/ADF

DEP 37.81.40.30-Gen

Feb. 2012

Syntactic foam insulationfor flowlines.

Kopp, Frans SIEPPTP/ADS

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 45

Number

Date of Issue

Title

Custodian

DEP 37.81.40.31-Gen.

Feb. 2011

Welding of deepwater pipelines, flowlines and steel catenary risers (amendments and supplements to API 1104).

Kopp, Frans SIEPPTM/ASUR

Circ.)  (Feb. 2012 Circ.)  DEP 37.81.40.32-Gen.

2012  Feb. 2012 

 Automated ultrasonic inspection (AUT) (AUT) of girth welds for carbon steel and CRA lined pipelines, flowlines and catenary risers.

Kopp, Frans SIEPPTP/ADS

DEP 37.81.40.34-Gen 37.81.40.34-Gen  

Feb. 2012  2012 

Insulation for pipe-in-pipe (PIP) flowlines.

Kopp, Frans SIEPPTP/ADS

DEP 37.81.40.35-Gen.

Sep. 2011

Deepwater collet type connector systems.

Kopp, Frans SIEPPTP/ADS

DEP 37.81.40.38-Gen.

Sep. 2011

Deepwater subsea manifold system (amendments/supplements to (amendments/supplements ISO/DIS 13628-15 2009 and  API RP 17P 2009).

Still, Ian RW SIEPPTP/ADS

DEP 37.81.40.40-Gen.

Sep. 2011

External Monel clad riser pipe.

Guijt, Wim GSNLPTE/EPFA

DEP 37.81.40.41-Gen.

Feb. 2011 (Feb. 2012 Circ.)  Circ.) 

Hyperbaric welding of pipelines (amendments/supplements (amendments/supplem ents to ISO 13847).

Guijt, Wim GSNLPTE/EPFA

Sep. 2011

Onshore fabrication of deepwater

Kopp, Frans SIEP-

pipelines, flowlines, risers and their appurtenances.

PTP/ADS

DEP 37.81.41.30-Gen.

DEP 37.81.41.33-Gen.

Sep. 2011

Offshore construction specification specification for deepwater pipelines, flowlines and risers.

Kopp, Frans SIEPPTP/ADS

DEP 37.81.41.35-Gen.

Sep. 2011

Offshore pipeline and umbilical/cable umbilical/cable crossings.

Kopp, Frans SIEPPTP/ADS

DEP 37.81.41.36-Gen.

Sep. 2011

Deepwater syntactic foam insulation for subsea structures.

Kopp, Frans SIEPPTP/ADS

DEP 37.81.41.37-Gen.

Sep. 2011

Qualificatio Qualification n of insulation for deepwater applications.

Kopp, Frans SIEPPTP/ADS

DEP 37.81.42.30-Gen.

Sep. 2011

Unbonded flexible pipe for offshore applications (amendments/supplements (amendments/supplements to ISO 13628-2 & ISO 13628-11).

Kopp, Frans SIEPPTP/ADS

DEP 37.81.42.31-Gen.

Sep. 2011

Deepwater pipeline end terminations and midline sleds.

Kopp, Frans SIEPPTP/ADS

DEP 37.81.42.34-Gen.

Sep. 2011

ROV operations for work-class vehicles.

Kopp, Frans SIEPPTP/ADS

DEP 37.81.42.35-Gen.

2012  Feb. 2012 

Qualification of girthweld inspection with automated ultrasonic inspection (AUT) systems.

Kopp, Frans SIEPPTP/ADS

DEP 37.90.10.32-Gen.

Feb. 2011 (Feb. 2012 Circ.)  Circ.) 

Dynamically positioned (DP) vessels for construction, drilling/completions/well drilling/completions/well intervention activities - Selection and operation.

Morrison, Denby G SIEP-PTP/ADF

Feb. 2011

Single point mooring (SPM) systems.

Morrison, Denby G SIEP-PTP/ADF

Mobile mooring systems (based on  API RP 2SK, API RP RP 2SM and  API RP 2I).

Morrison, Denby G SIEP-PTP/ADF

Oil loading and discharge hoses for offshore mooring installations

Morrison, Denby G SIEP-PTP/ADF

DEP 37.91.10.10-Gen.

(Feb. 2012 Circ.)  Circ.)  DEP 37.91.10.11-Gen.

Feb. 2011 Circ.)  (Feb. 2012 Circ.) 

DEP 37.91.20.30-Gen.

Aug. 2005

(amendments/supplements to OCIMF (amendments/supplements Guide).

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 46

Number

Date of Issue

Title

Custodian

DEP 37.92.10.30-Gen.

Sep. 2010

Offshore pedestal-mounted cranes (amendments/supplements to (amendments/supplements  API Spec 2C).

Morrison, Denby G SIEP-PTP/ADF

DEP 37.92.10.31-Gen.

Withdrawn

Pedestal cranes (amendments/supplements to Lloyd's (amendments/supplements code and BS 2573) [37.92.10.30].

DEP 38.80.10.30-Gen.

Nov. 2006

Drilling fluid materials - Specifications and tests (Endorsement of ISO 13500).

Stevenson, Eddie SIEP-PTW/TAWT

DEP 38.80.10.31-Gen.

Sep. 2002

Field testing of drilling fluids - Water based fluids (endorsement of ISO 10414-1).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.10.32-Gen.

Apr. 2003

Field testing of drilling fluids - Oil-based fluids (amendments/supplements to ISO 10414-2).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.10.33-Gen.

Dec. 2004

Measurement of viscous properties of completion fluids (Endorsement of ISO 13503-1).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.10.34-Gen.

Dec. 2004

Drilling fluids - Laboratory testing (Endorsement of ISO 10416).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.10.35-Gen.

Nov. 2006

Drilling and fluids materials - Drilling fluids - Processing systems evaluation (Endorsement of ISO 13501).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.10.36-Gen.

Jun. 2007

Completion fluids and materials - Testing of heavy brines (endorsement of ISO 13503-3).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.10.37-Gen.

Jun. 2007

Completion fluids and materials Procedures for measuring the long-term conductivity of proppants (endorsement of ISO 13503-5).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.10.38-Gen.

Jun. 2007

Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions (endorsement of ISO 13503-4).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.10.39-Gen.

Jun. 2007

Completion fluids and materials Measurement of properties of proppants used in hydraulic fracturing and gravelpacking operations (endorsement of ISO 13503-2).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.20.30-Gen.

Nov. 2006

Specifications for cements and materials

Klever,Frans J GSNL-

for well cementing (endorsement of ISO 10426-1).

PTW/TDMT

DEP 38.80.20.31-Gen.

Nov. 2006

Testing of well cements (Endorsement of ISO 10426-2).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.20.32-Gen.

Dec. 2004

Performance testing of cementing float equipment (endorsement of ISO 10427- 3).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.20.33-Gen.

Dec. 2004

Bow-spring casing centralizers (Endorsement of ISO 10427-1).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.20.34-Gen.

Aug. 2005

Centralizer placement and stop-collar testing (Endorsement of ISO 10427-2).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.20.35-Gen.

Dec. 2004

Testing of deepwater well cement formulations (Endorsement of ISO 10426-3).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.20.36-Gen.

Nov. 2006

Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (Endorsement of ISO 10426-5).

Klever,Frans J GSNLPTW/TDMT

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 47

Number

Date of Issue

Title

Custodian

DEP 38.80.20.37-Gen.

Nov. 2006

Preparation and testing of foamed cement slurries at atmospheric pressure (Endorsement of ISO 10426-4).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.30.31-Gen.

Dec. 2004

Drilling and production hoisting equipment (Endorsement of ISO 13535).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.30.32-Gen.

Dec. 2004

Inspection, maintenance, repair and remanufacture of hoisting equipment (Endorsement of ISO 13534).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.30.33-Gen.

Dec. 2004

Drilling and well servicing equipment (Endorsement of ISO 14693).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.40.30-Gen.

Aug. 2005

Steel drill pipe with weld-on tool joints (amendments/supplements to (amendments/supplements ISO 11961).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.40.31-Gen.

Dec. 2007

Aluminium alloy drill pipe (Endorsement of ISO 15546).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.40.32-Gen.

Dec. 2004

Marine drilling riser couplings (Endorsement of ISO 13625).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.40.34-Gen.

Dec. 2007

Rotary drilling equipment - Threading and gauging of rotary shouldered thread connections (endorsement of ISO 10424-2).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.50.30-Gen.

Dec. 2004

Drill-through equipment (Endorsement of ISO 13533).

Klever,Frans J GSNLPTW/TDMT

DEP 38.80.60.30-Gen.

Dec. 2004

Drilling and well servicing structures (Endorsement of ISO 13626).

Klever,Frans J GSNLPTW/TDMT

DEP 39.01.10.11-Gen.

Feb. 2011

Selection of materials for life cycle performance (Upstream facilities) Materials selection process.

McFarland, Sam GSNL-PTE/EMMI

Circ.)  (Feb. 2012 Circ.)  DEP 39.01.10.12-Gen.

Feb. 2012

Selection of materials for life cycle performance (Upstream facilities) – Equipment.

McFarland, Sam GSNL-PTE/EMMI

DEP 39.01.10.30-Gen

Feb. 2012

Specification for nickel base alloy 625 plus (UNS N07716) and alloy 725 (UNS N07725) for oil and gas drilling and production equipment.

Paterson, Steve J SUKEP-UIE /P/SDD

Feb. 2011

Specification of nickel base alloy 718 (UNS N07718) for oil and gas drilling and production equipment (amendments/supplements (amendments/supplem ents to  API Standard 6A718).

Miglin, Bruce P SIEPPTI/GM

Withdrawn

L80 13%Cr casing and tubing (amendments/supplements to (amendments/supplements ISO/DIS 11960.2).

Yuen, Simon SCANPTE/AMMI

Feb. 2011

Casing and tubing design manual; Volume 1 - Mandatory requirements.

Taff, Cindy D SIEPPTW/D

DEP 39.01.10.32-Gen.

Circ.)  (Feb. 2012 Circ.) 

DEP 39.01.20.10-Gen.

WS 39.01.20.12-Gen.

(Feb. 2012 Circ.)  Circ.)  DEP 39.01.20.30-Gen.

Withdrawn

Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (endorsement of ISO 13680).

DEP 39.01.20.31-Gen.

Dec. 2000

Care and use of casing and tubing (endorsement of ISO 10405).

Klever, Frans J SIEPPTW/TDMT

DEP 39.01.20.32-Gen.

Dec. 2004

Testing procedures for casing and tubing connections (Endorsement of ISO 13679).

Klever, Frans J SIEPPTW/TDMT

DEP 39.01.20.33-Gen.

Dec. 2004

Evaluation and testing of thread compounds for use with casing, tubing and line pipe (Endorsement of ISO 13678).

Klever, Frans J SIEPPTW/TDMT

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 48

Number

Date of Issue

Title

Custodian

DEP 39.01.20.34-Gen.

Dec. 2004

Field inspection of new casing, tubing and plain-end drill pipe (Endorsement of ISO 15463).

Klever, Frans J SIEPPTW/TDMT

DEP 39.01.30.30-Gen.

Feb. 2012

Wellhead and christmas tree equipment (amendments and supplements to ISO 10423).

Bruce, Richard J SUKEP-UIE/T/WS

DEP 39.01.30.31-Gen.

Nov. 2006

Downhole equipment - Subsurface safety valves (endorsement of ISO 10432).

Klever, Frans J SIEPPTW/TDMT

DEP 39.01.30.34-Gen.

Aug. 2005

Downhole equipment - Packers and bridge plugs (Endorsement of ISO 14310).

Klever, Frans J SIEPPTW/TDMT

DEP 39.01.30.35-Gen.

Aug. 2005

Downhole equipment - Lock mandrels and landing nipples (Endorsement of ISO 16070).

Klever, Frans J SIEPPTW/TDMT

DEP 39.01.30.36-Gen.

Apr. 2006

Downhole equipment - Side-pocket mandrels (endorsement of ISO 17078-1).

Klever, Frans J SIEPPTW/TDMT

DEP 39.01.30.38-Gen.

Jan. 2009

Downhole equipment - Flow control devices for side-pocket mandrels (endorsement of ISO 17078-2).

Klever, Frans J SIEPPTW/TDMT

DEP 39.29.10.30-Gen.

Aug. 2005

Downhole equipment - Progressive cavity pumps for artificial lift (Endorsement of ISO 15136-1).

Klever, Frans J SIEPPTW/TDMT

DEP 39.29.10.31-Gen.

Dec. 2007

Downhole equipment - Progressing cavity pumps for artificial lift - Surfacedrive systems (endorsement of ISO 15136-2).

Klever, Frans J SIEPPTW/TDMT

DEP 39.40.20.30-Gen.

Withdrawn

High pressure metal/polymer flexible pipe for use in oil and gas operations as flowlines and risers (37.80.00.30).

DEP 39.40.20.93-Gen.

Withdrawn

Metal/polymer flexible pipe.

DEP 40.10.01.11-Gen.

Withdrawn

Capital project coding system.

DEP 40.10.10.41-Gen.

Withdrawn

List of approved suppliers of longitudinally welded stainless pipes and tubes.

DEP 40.10.21.40-Gen.

Withdrawn

List of approved suppliers of seamless aluminium brass condenser/cooler tubes.

DEP 40.10.40.40-Gen.

Withdrawn

List of approved oil-resistant CAF compound jointing.

DEP 40.10.40.41-Gen.

Withdrawn

List of approved acid-resistant CAF compound jointing.

DEP 40.10.40.42-Gen.

Withdrawn

List of approved spiral-wound gaskets.

DEP 40.10.50.41-Gen.

Withdrawn

List of approved suppliers of 1 Cr-0.25 Mo steel bolts and medium carbon steel nuts.

DEP 40.10.64.10-Gen.

Withdrawn

Welding electrodes, rods wires and fluxes.

DEP 40.48.00.30-Gen.

Withdrawn

Paints and paint materials (30.48.00.31, 70.48.10.10).

DEP 41.20.20.31-Gen.

Withdrawn

Purchasing procedure trays for columns (MA-13).

DEP 41.21.01.30-Gen.

Withdrawn

Purchasing procedure unfired shell and tube heat exchangers (MA-11).

DEP 41.21.70.31-Gen.

Withdrawn

Air cooled heat exchangers - purchasing procedure.

 

ECCN EAR99

DEP 00.00.05.05-Gen. February 2012 Page 49

Number

Date of Issue

Title

DEP 41.24.49.31-Gen.

Withdrawn

Shop fabrication of heater piping purchasing procedure.

DEP 41.38.01.31-Gen.

Withdrawn

Purchasing procedure shop fabrication of steel piping (MA-05).

DEP 42.31.31.30-Gen.

Withdrawn

Purchasing procedure signal light

DEP 43.06.41.31-Gen.

Withdrawn

assemblies. Electrical equipment for hoisting gear.

DEP 43.65.11.31-Gen.

Withdrawn

Synchronous AC generators.

DEP 43.65.40.31-Gen.

Withdrawn

Power and distribution transformers.

DEP 43.66.05.31-Gen.

Withdrawn

Electric motors, three-phase, aquirrel cage, induction type to 4,000 hp incl.

DEP 43.66.05.32-Gen.

Withdrawn

Electric motors.

DEP 43.67.01.31-Gen.

Withdrawn

AC switchboards for voltages not exceeding 1000 V.

DEP 43.67.51.31-Gen.

Withdrawn

HT switchboards.

DEP 44.24.90.31-Gen.

Feb. 2012

Refractory bricks and shapes.

Yuen, Simon SCAIPTE/AMMI

DEP 44.24.90.32-Gen.

Feb. 2012 2012  

Classification of refractory bricks and shapes.

Yuen, Simon SCAIPTE/AMMI

DEP 44.24.90.33-Gen.  44.24.90.33-Gen. 

Feb. 2012  2012 

Specification for sampling and testing of refractory bricks and shapes.

Yuen, Simon SCAIPTE/AMMI   PTE/AMMI

DEP 44.24.90.34-Gen. 44.24.90.34-Gen.  

Feb. 2012  2012 

Classification, specification specification and testing for ancillary materials for refractory brick construction.

Yuen, Simon SCAIPTE/AMMI   PTE/AMMI

DEP 44.24.90.35-Gen. 44.24.90.35-Gen.  

Feb. 2012  2012 

Specification and quality control for precast or specialty cast refractory baffle wall tile (shapes).

Yuen, Simon SCAIPTE/AMMI   PTE/AMMI

DEP 44.28.00.31-Gen.

Withdrawn

Purchasing procedures steel structures (MA-12).

DEP 44.51.01.31-Gen.

Withdrawn

Purchasing procedure standard vertical tanks (MA-07).

DEP 52.54.80.10-Gen.

Withdrawn

Guidelines for starting-up fired equipment.

DEP 60.00.10.13-Gen

Feb .2012

Mobile crane foundation assessment assessment..

Hospers, Bareld GSNL-PTE/ECSO

DEP 61.10.08.11-Gen.

Feb. 2011

Field inspection prior to commissioning commissioning of mechanical equipment.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 61.22.01.31-Gen.

Withdrawn

Rotating disc contactors - Installation, site testing and maintenance (31.22.01.31).

DEP 61.24.15.31-Gen.

Withdrawn

SIPM-type vertical furnaces and waste heat boilers - Field erection.

DEP 61.38.10.10-Gen.

Feb. 2012  2012 

Shop and field fabrication of orifice meter runs.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 61.40.20.30-Gen.

Feb. 2011

Welding of pipelines and related facilities(amendments/supplements facilities(amend ments/supplements to ISO 13847:2000).

Guijt, Wim GSNLPTE/EPFA

Circ.)  (Feb. 2012 Circ.) 

Field welding of duplex and super duplex stainless steel pipelines (amendments/supplements (amendments/supplem ents to API 1104).

Guijt, Wim GSNLPTE/EPFA

Feb. 2012

Welding of CRA-clad or CRA-lined pipe

Guijt, Wim GSNL-

(Feb. 2012 Circ.)  Circ.)  DEP 61.40.20.31-Gen.

DEP 61.40.20.36-Gen.

Feb. 2011

materials (amendments/supplements to th  API 1104:20  edition). DEP 62.10.08.11-Gen.

Feb. 2011

Inspection and functional testing of

Custodian

PTE/EPFA Mooi, Peter GSNL-

 

ECCN EAR99

Number

DEP 00.00.05.05-Gen. February 2012 Page 50

Date of Issue

Title

Custodian

Circ.)   (Feb. 2012 Circ.)

instruments.

PTE/EPAC

DEP 62.10.09.11-Gen.

Withdrawn

Factory inspection and testing of instruments and instrument systems (62.10.08.11).

DEP 62.37.10.12-Gen.

Withdrawn

Instrument installation procedures.

DEP 63.10.08.11-Gen.

Sep. 2011

Field commissioning commissioning of electrical installations and equipment.

de Wilt, Wim GSNLPTE/EELE

DEP 63.10.08.14-Gen.

Feb. 2012

Field commissio commissioning ning and testing of electrical installations and equipment for North American application.

de Wilt, Wim GSNLPTE/EELE

RMP 63.10.08.50-Gen.

Sep. 2011

Maintenance of electrical installations and equipment.

de Wilt, Wim GSNLPTE/EELE

DEP 63.20.08.10-Gen.

Sep. 2011

Electrical installation for North American application.

Barrios, Louis A GSUSI-PTE/AELE

DEP 64.11.10.31-Gen.

Withdrawn

Site preparation (34.11.00.11).

DEP 64.24.32.11-Gen.

Feb. 2011

Refractory linings for sulphur recovery units (Claus and SCOT).

Yuen, Simon SCAIPTE/AMMI

(Sep. 2011 Circ.) DEP 64.24.32.12-Gen.

Feb. 2012

Refractory lining for fluidized catalytic cracking unit (FCCU).

Wolfert, Ton GSNLPTE/EMMI

DEP 64.24.32.30-Gen.

Dec. 1997

Insulating and dense refractory concrete

Yuen, Simon SCAI-

linings.

PTE/AMMI

DEP 64.24.32.31-Gen.

Feb. 2012 2012  

Construction details for refractory brick and shape construction.

Yuen, Simon SCAIPTE/AMMI

DEP 64.51.01.31-Gen.

Withdrawn

Vertical tanks - Erection and testing (based on EN 14015).

DEP 70.00.00.10-Gen.

Withdrawn

Collection and exchange of reliability and maintenance data for equipment (endorsement of ISO 14224).

DEP 70.07.20.30-Gen.

Withdrawn

Magnetic particle inspection of the threaded parts of steel drill stem.

DEP 70.08.10.10-Gen.

Withdrawn

Equipment and tools for maintenance and inspection. Part 1: - Inspection Tools and NDT instruments.

DEP 70.08.10.11-Gen.

Sep. 2011

Mechanical maintenance equipment and tools .

DEP 70.08.10.12-Gen.

Withdrawn

Equipment and tools for maintenance and inspection. Part 3: - Mechanical maintenance - Tools (70.08.10.11).

DEP 70.08.10.13-Gen.

Aug. 2005

Electrical workshop - Test equipment and tools.

DEP 70.08.10.14-Gen.

Withdrawn

Equipment and tools for maintenance and inspection. Part 5: - Instrument technical centre and workshop Equipment and tools.

DEP 70.10.01.10-Gen.

Withdrawn

Equipment record cards.

DEP 70.10.01.30-Gen.

Withdrawn

Equipment record cards.

DEP 70.10.70.11-Gen.

Feb. 2011

Preservation of new and old equipment standing idle.

Johnson, Sean M GSUSI-PTE/AMMI

RMP 70.10.70.50-Gen.

Feb. 2011

Preservation of new and old equipment standing idle.

Johnson, Sean M GSUSI-PTE/AMMI

DEP 70.10.80.11-Gen.

Jan. 1998

Cleaning of equipment.

Den Boestert, Jan

Bitter, Peter GSNLPTE/EOEX

Donnellan, Paul J GSNL-PTE/EELE

LWC GSNLPTD/TDSE DEP 70.10.90.11-Gen.

Feb 2012

Spare parts.

Roberts,Jason M

 

ECCN EAR99

Number

DEP 00.00.05.05-Gen. February 2012 Page 51

Date of Issue

Title

Custodian

GSUK-PTE/EOEX DEP 70.48.10.10-Gen.

Withdrawn

Maintenance painting (30.48.00.31).

DEP 70.48.11.30-Gen.

Dec. 2007

Protective coatings for offshore facilities.

DEP 70.51.10.11-Gen.

Withdrawn

Field inspection, maintenance and repair of vertical steel storage tanks.

RMP 70.51.10.50-Gen.

Sep. 2011

Field inspection, maintenance and repair of vertical steel storage tanks (amendments/supplements (amendments/supplem ents to API 653 and EEMUA159).

Yuen, Simon SCAIPTE/AMMI

DEP 74.00.10.10-Gen.

Feb. 2012

Shop and field pressure testing of piping systems.

Kruijer, Alfred A GSNL-PTE/EMMI

DEP 74.04.12.15-Gen.

Withdrawn

Testing methods for stored cat. cracker refractories.

DEP 74.36.10.31-Gen.

Withdrawn

Testing of soft seat ball valves designed in accordance with BS 5351.

DEP 74.36.10.32-Gen.

Withdrawn

Design and evaluation of rubber lined butterfly valves for fire protection service.

DEP 80.00.10.10-Gen.

Feb. 2011

 Area classification classification .

Salter, Natalie Y GSNL-PTD/HPTS

(Feb. 2012 Circ.)  Circ.) 

Van Bokhorst, Jan R GSNL-PTE/EMMI

DEP 80.00.10.11-Gen.

Feb. 2011 (Sep. 2011 Circ.) Circ.)  (Feb. 2012 Circ.) 

Layout of onshore facilities.

Kruijsen, Ton ATJJM GSNL –PTE/ECSO

DEP 80.00.10.12-Gen.

Feb. 2011

Layout of offshore facilities.

Rhodes, Terry C SUKEP-UIE/T/PE

 Area classification classification and electrical electrical equipment spacing for North American application.

de Wilt, Wim GSNLPTE/EELE

(Feb. 2012 Circ.)  Circ.)  DEP 80.00.10.13-Gen.

Feb. 2011 (Sep. 2011 Circ.) Circ.)  (Feb. 2012 Circ.) 

DEP 80.36.00.30-Gen.

Feb. 2012

Relief devices - Selection, sizing and specification.

Kruijer, Alfred GSNLPTE/EMMI

DEP 80.45.10.10-Gen.

2012  Feb. 2012 

Design of pressure relief, flare and vent systems.

Kruijer, Alfred GSNLPTE/EMMI

DEP 80.45.10.11-Gen.

Feb. 2012  2012 

Overpressure and underpressure Prevention and protection.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 80.45.10.12-Gen.

Feb. 2011

Emergency depressuring and

Salter, Natalie Y

(Sep. 2011 Circ.) (Feb. 2012 Circ.)  Circ.) 

sectionalizing.

GSNL-PTD/HPTS

DEP 80.45.10.13-Gen.

Feb. 2012

Alternative pressure relief design for assessment of existing facilities.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 80.45.11.12-Gen.

Feb. 2011

Flare details (amendments/supplements (amendments/supplements to ISO 25457).

Gouwerok, Leo PJ GSNL-PTE/EUHT

Interlocking systems for pressure relief valves.

Kruijer, Alfred GSNLPTE/EMMI

Circ.)  (Feb. 2012 Circ.)  DEP 80.46.30.11-Gen.

Feb. 2011 (Sep. 2011 Circ.) (Feb. 2012 Circ.)  Circ.) 

DEP 80.47.10.10-Gen.

Withdrawn

Fire-fighting agents (80.47.10.32).

DEP 80.47.10.11-Gen.

Withdrawn

Fire-fighting systems (80.47.10.30).

Feb. 2011 Circ.)  (Feb. 2012 Circ.) 

Water-based fire protection systems for offshore facilities.

Salter, Natalie Y GSNL-PTD/HPTS

Feb. 2011

 Assessment of the the fire safety of onshore onshore

Salter, Natalie Y

(Sep. 2011 Circ.)

installations.

GSNL-PTD/HPTS

Feb. 2011

Active fire protection systems and

Salter, Natalie Y

DEP 80.47.10.12-Gen.

DEP 80.47.10.30-Gen.

DEP 80.47.10.31-Gen.

 

ECCN EAR99

Number

DEP 00.00.05.05-Gen. February 2012 Page 52

Date of Issue

Title

Custodian

(Sep. 2011 Circ.) Circ.)   (Feb. 2012 Circ.)

equipment for onshore facilities.

GSNL-PTD/HPTS

DEP 80.47.10.32-Gen.

Sep. 2011

Fire-fighting agents and portable/mobile fire fighting equipment for onshore applications.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 80.47.10.33-Gen.

Feb. 2012

Fire-fighting vehicles and fire stations.

Salter, Natalie Y GSNL-PTD/HPTS

DEP 80.47.20.30-Gen.

Withdrawn

Trucks and trailers for fire-fighting (80.47.10.33).

DEP 80.64.10.10-Gen.

Feb. 2011

Electrical safety rules.

de Wilt, Wim GSNLPTE/EELE

DEP 80.80.00.10-Gen.

Feb. 2011

Offshore facilities life-saving appliance requirements (amendments/supplements (amendments/supplements to SOLAS and associated LSA).

Rhodes, Terry C SUKEP-UIE/T/PE

Circ.)  (Feb. 2012 Circ.)  DEP 80.80.00.11-Gen.

Feb. 2011

Control and mitigation of fires and explosions on offshore production installations (amendments/supplements (amendments/supplements to ISO 13702:1999).

Salter, Natalie Y GSNL-PTD/HPTS

DEP 80.80.00.12-Gen.

Feb. 2011

Offshore production installations Requirements and guidelines for emergency response (amendments/supplements (amendments/supplem ents to

Salter, Natalie Y GSNL-PTD/HPTS

DEP 80.80.00.13-Gen.

Sep. 2002

DEP 82.00.10.10-Gen.

2012  Feb. 2012 

Project quality assurance.

DEP 82.00.10.11-Gen.

Withdrawn

Cost Control Of Capital Investment Projects (Project Guide No. 6, OG.03.307.48).

DEP 82.00.10.12-Gen.

Feb. 2011

Life cycle costing (endorsement of ISO 15663-1).

Brown, Dave A SIEPPTE/SCDM

DEP 82.00.10.30-Gen.

Feb. 2012

Engineering information specification specification (EIS).

Festen, Maarten M GSNL-PTE/EOEX

DEP 91.00.00.10-Gen.

Withdrawn

Sector-specific quality management systems - Requirements for product and service supply organizations (Endorsement of ISO/TS 29001).

ISO 15544:2000). Offshore production installations Guidelines on tools and techniques for identification and assessment of hazardous events (amendments/supplements (amendments/supplem ents to ISO 17776).

Salter, Natalie Y GSNL-PTD/HPTS

Arnold, Gregory C GSUSI-PTE/AQIP