Get 8va Edicion

Cat Ground Engaging Tools Parts Sales Kit ®

®

Cat Ground Engaging Tools Parts Sales Kit

8th Edition

CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

PECP3001-07

www.cat.com

Printed in USA

© 2005 Caterpillar

All Rights Reserved

Caterpillar. The difference counts.™

8th Edition

®

Cat Ground Engaging Tools

Ground Engaging Tools

Section No.

Wear Protection

1

Bulldozers / Compactors

2

Excavators

3

5000 Series Shovels

4

Hydraulic Hammers / Demolition Tools / Rock Drill Tools

5

Loaders / Backhoe Loaders / Integrated Toolcarriers

6

Skid Steer Loader

7

Underground Mining

8

Paving Products

9

Motor Graders

10

Rippers / Scarifiers

11

Scrapers

12

GET Service Tools

13

GET Made As Ordered Program

14

Appendix / Reference Materials

15

For updates to this book, please visit our website on Infocast: https://nacd.cat.com/infocast/frames/prodsupp/get/ 1

Introduction This Ground Engaging Tools Parts Sales Kit (GET) is designed to provide dealer salespeople (field and instore) with part numbers and product information as well as features and benefits for selected parts and service products. It is a quick reference tool which lists part numbers and applications for items that are: new, competitive and high in sales volume and sales potential. The GET PSK should not be used as a substitute for Parts Books, Numerical Parts Record, Parts Pricing Medium or any other formal reference publication. All part numbers, specifications and application data published in the GET PSK are subject to change without notice. Any information taken from this publication for use in preparing a Parts Sales Order or Price Quotation should always be verified against the Numerical Parts Record in accordance with the Management Partsgram entitled “The Numerical Parts Record.” The tab index enables users to quickly locate various sections in the GET PSK. Users are urged to use the GET PSK consistently to help ensure close familiarity with the vast amount of part numbers and product information.

Ground Engaging Tools This book supports the Caterpillar® Ground Engaging Tools for loader buckets, excavator buckets, rippers, bulldozer blades and scraper bowls on either competitive or Caterpillar machines. The function of the program is to increase customer satisfaction and GET component sales by making available a consistent, high-quality GET product line for all machines. The Ground Engaging Tools PSK should be useful in various departments, for example: • Parts and Service Salespeople can use it to determine convertibility and establish a quote. • The service/welding shop will also find many uses for this guide. • Used equipment salesperson can convert machines on the lot to Caterpillar GET, increasing their value. NOTE: For a detailed list of serial number equivalent information, see Serial Number Index, Form No. SEBF9451. This Equivalent Serial Number Guide covers Caterpillar machines from 1955.

2

Wear Protection

Wear Protection — Section Contents Page Weld-On Half-Arrow Edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Weld-On Heel Shrouds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 “White Iron” Wear Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Mechanically Attached Wear Plate System (MAWPS) . . . . . . . . . . . . . . . . . . . . .1-4 MAWPS Remove and Install Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7 Wear Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-8

1-1

Wear Protection WELD-ON HALF-ARROW EDGES / WELD-ON HEEL SHROUDS

WELD-ON HALF-ARROW EDGES Weld-on half-arrow edges protect the bucket structure by adding more wear material to the base edge, and they will fit other brand buckets. The weld-on half-arrow edges can be used to customize loader buckets. For example, they could be used as sidecutters on bucket side bars to improve penetration, or welded between bucket teeth to reduce scalloping. Before welding half-arrow sections between bucket teeth, be sure to check for tip and pin hole B clearance. This is a concern primarily when using bottom strap adapters. Options W Part No. 134-1774 134-1776 8J-8141 8J-8176 6Y-2107 109-2696 132-1013

in. 4 6 8 10 10 10 11.6

mm 101 151 203 254 254 254 295

in. 0.43 0.63 0.75 1.10 1.60 1.60 1.77

T mm 11 16 19 28 40 40 45

H in. mm 0.40 10 0.60 16 0.50 13 1.10 29 1.20 30 1.20 30 1.34 34

B in. 0.14 0.22 0.16 0.44 1.00 1.00 0.47

mm 3.5 5.5 4.0 11 25 25 12

T

H W

Overall Length feet mm 8 2438 8 2438 12 3658 12 3658 12 3658 18 5486 3.3 1000

WELD-ON HEEL SHROUDS Weld-on heel shrouds protect the lower outside corner of all types of Caterpillar and other brand buckets. Protection is given to the bottom and the side of the bucket with extra wear material concentrated in the corner where it’s needed most. Straight and curved heel shrouds are available in two different sizes to best match bucket contour and size, and abrasiveness of the application. The inside corner is relieved to eliminate interference with the bucket structure. Shrouds need not be placed tightly together. They can be spaced apart and still provide full protection due to ‘shadowing.’ Weld-on heel shrouds are especially applicable for LHEX and underground LHD buckets. For high wear applications Caterpillar’s Mechanically Attached Wear Plate System (MAWPS) should be considered due to their quick change design. However, for moderate wear applications and sites especially concerned about mechanically fastened parts these weld-on heel shrouds are an excellent option to consider. Weight lb Part No. Type (kg) 157-1019 straight 68.4 (31.0) 157-1027 curved 63.1 (28.6) 138-6529 straight 30.4 (13.8) 138-6551 curved 29.5 (13.4)

A in (mm) 9.8 (250) 9.8 (250) 6.9 (175) 6.9 (175)

B C D E F G H R in in in in in in in in (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 7.9 — 10.6 2.0 1.8 1.2 7.9 — (200) (270) (50) (45) (30) (200) 7.9 7.6 10.6 2.0 1.8 1.2 7.9 31.5 (200) (193) (270) (50) (45) (30) (200) (800) 5.9 — 8.1 1.6 1.4 1.0 5.9 — (150) (205) (40) (35) (25) (150) 5.9 5.4 8.1 1.6 1.4 1.0 5.9 23.6 (150) (136) (205) (40) (35) (25) (150) (600)

B

A

C

R

A

1-2

Wear Protection “WHITE IRON” WEAR BLOCK

“WHITE IRON” WEAR BLOCK

137-9699 4" x 8" x 1" (102 mm x 205 mm x 25 mm)

The high chrome alloy “white iron” is brazed to a mild steel backing plate which can be plug-welded with an E7018 3/32" (or similar) stick electrode to a bucket, dozer moldboard, or anywhere quick installation, low cost, abrasion protection is desired. As with any welding, traditional preheating practices apply, depending upon the location. In addition to quick installation, another advantage of the design is that the plug welds and steel base are protected from wear. This product is designed to add long wear life in highly abrasive applications. It has a hardness rating of Rc 60-65 and offers lower cost protection than “hardfacing.” In addition to its ease of application, it is environmentally neutral, unlike some other wear protection products.

Part Numbers:

137-9699

137-9698

137-9697

Sizes:

4x8x1 102 x 205 x 25

4.6 x 4.6 x .54 117 x 117 x 14

4.6 x 2 x .54 117 x 51 x 14

Weights: (lbs) (kg)

7.19 3.27

2.79 1.27

1.14 0.52

Features:

• quick installation • versatility • low cost • environmentally neutral • hardness Rc 60-65 • protected welds and steel base

Applications:

Anywhere extra protection is needed for abrasive wear. May not be suitable for higher impact job sites.

(inches) (mm)

137-9698 4.6" x 4.6" x .54" (117 mm x 117 mm x 14 mm)

137-9697 4.6" x 2" x .54" (117 mm x 51 mm x 14 mm)

1-3

Wear Protection MECHANICALLY ATTACHED WEAR PLATE SYSTEM

MECHANICALLY ATTACHED WEAR PLATE SYSTEM (MAWPS) The Mechanically Attached Wear Plate System provides a hammerless means of installation and removal. They are capable of protecting wear areas previously unprotected or protected by weld-on or bolt-on wear plates in a large variety of applications on Cat and competitive machines. The Skeletal MAWPS uses the same Series 20 base and retainer as the regular MAWPS, but has a modified skeletal plate that fits on the base. The Skeletal MAWPS wear plate is skeletal in form so it traps material in the plate and between the plates. Features and Benefits • Mechanical, “hammerless” installation. The Mechanically Attached Wear Plate System consists of a through-hardened DH-2 wear plate which slides onto a weld-on base plate and is held in place with a patented compression retainer. The Skeletal MAWPS wear plate is skeletal in form so it traps material in the plate and between the plates. With both MAWPS systems, worn wear plates can be quickly replaced using a common prybar or a MAWPS removal tool, 160-5119, without hammering or welding. This makes removal and installation quick and easy. Worn wear plates can be quickly replaced using a common prybar without hammering or welding, making removal and installation quick and easy. • Reduced downtime and maintenance. Because the wear plates can be changed quickly, usually in two minutes or less, downtime and maintenance time are reduced compared to weld-on or bolt-on wear plates. • Extended wearing. The patented compression retainer is positioned low in the base plate allowing a greater percentage of the wear plate to be worn away before replacement. Competitive wear plates house the retainer higher in the wear plate thereby reducing the amount of available wear material. The Cat wear plate’s more efficient use of total material lengthens replacement intervals and allows for less additional bucket weight for comparable protection. • Flexible application. The weld-on base plate can be welded on virtually any flat or moderately curved surface. The system is designed to take loads from any direction so the orientation of the wear plate to the direction of the load is inconsequential. The Mechanically Attached Wear Plate System can easily be used to customize a wide variety of wearing surfaces. Description Wear plates are made from Caterpillar DH-2 steel and are through hardened to obtain optimum strength and wear life. The base plate is made from slightly softer but tough weldable steel to withstand high load forces. The base plate is not subject to wear under normal conditions since it is entirely covered by the wear plate. The patented compression retainer is investment cast from spring steel material and acts as a spacer when located in the holding position. As a system, the Mechanically Attached Wear Plate System will accept loads from any direction and does not require specific orientation as with competitive wear plates. They only require approximately 2 inches (50 mm) of space from adjacent objects on one end to facilitate replacement. Application The Mechanically Attached Wear Plate System can be installed on virtually any flat surface or on moderately curved surfaces providing the radius is not extremely small. Radius capability is specified in the parts consist chart. Bucket bottoms and sides, dozer push arms, Hydraulic Excavator bucket ski runners and sides, truck body duck tails, Tiger dozer blades, crusher hoppers are all candidates for wear plate protection. Long life, ability to customize protection and ease of use promise to make this unique wear system a popular alternative to bolt-on or weld-on wear plates. The Skeletal Mechanically Attached Wear Plate System can be installed on virtually any flat or moderately curved surfaces of the truck bed. They come in two sizes, standard and heavy duty. Long life, ability to customize protection and ease of use promise to make this unique wear system a popular alternative to weld-on wear protection. 1-4

MAWPS

SKELETAL MAWPS

Wear Protection MECHANICALLY ATTACHED WEAR PLATE SYSTEM

Wear Indicator The wear plate has recessed holes (blind holes) cast into each corner to serve as a wear indicator making inspections quick and easy. When the holes become exposed in one or more corners, it is time to change the wear plate. If the wear plate is allowed to wear beyond the wear indicator, damage to base plate may occur. Parts Consist Mechanically Attached Wear Plate System Suggested Models 966, 980, 988, 345B, other similar sizes

Base Plate (thk) 138-0020 0.70 in thick (18 mm) 5.35 lb (2.43 kg)

Wear Plate (dimension) 138-0022 8.85 in x 7.87 in x 1.38 in (225 mm x 200 mm x 35 mm) 14.15 lb (6.42 kg)

Compression Retainer 138-0006

Radius Capability* 7.87 in (200 mm) minimum

Heavy Duty

same

same

same

same

30 Series

990, 992, 375, 5080, other similar sizes

138-0030 0.86 in thick (22 mm) 8.2 lb (3.72 kg)

138-0023 8.85 in x 7.87 in x 1.97 in (225 mm x 200 mm x 50 mm) 23.9 lb (10.85 kg) 138-0032 10.8 in x 7.87 in x 1.77 in (275 mm x 200 mm x 45 mm) 21.3 lb (9.67 kg)

138-0006

15.75 in (400 mm) minimum

Heavy Duty

same

same

same

same

40 Series

5110, 5130, other similar sizes

138-0040 1.14 in thick (29 mm) 10.15 lb (4.61 kg)

138-0007

31.50 in (800 mm) minimum

Heavy Duty

same

same

same

same

50 Series

994, 5230, other similar sizes

138-0050 1.14 in thick (29 mm) 13.4 lb (6.08 kg)

138-0007

47.25 in (1200 mm) minimum

Heavy Duty

same

same

same

same

Compression Retainer 138-0006

Radius Capability* 7.87 in (200 mm)

138-0006

7.87 in (200 mm)

Series 20 Series

138-0033 (10.8 in x 7.87 in x 2.36 in) 275 mm x 200 mm x 60 mm 32.6 lb (14.8 kg) 138-0042 10.8 in x 7.87 in x 2.36 in (275 mm x 200 mm x 60 mm) 29.25 lb (13.28 kg) 138-0043 10.8 in x 7.87 in x 2.95 in (275 mm x 200 mm x 75 mm) 41.2 lb (18.7 kg) 138-0052 11.81 in x 9.8 in x 2.95 in (300 mm x 250 mm x 75 mm) 55.25 lb (25.08 kg) 138-0053 11.81 in x 9.8 in x 3.93 in (300 mm x 250 mm x 100 mm) 83.15 lb (37.75 kg)

Skeletal Mechanically Attached Wear Plate System Series Standard

Heavy Duty

Suggested Models Off Highway Trucks

Off Highway Trucks

Base Plate (thk) 138-0020 0.70 in thick (18 mm) 5.35 lb (2.43 kg) 138-0020 0.70 in thick (18 mm) 5.35 lb (2.43 kg)

Wear Plate (dimension) 138-0024 8 in x 12.2 in x 1.38 in (202 mm x 310 mm x 35 mm) 12.9 lb (5.9 kg) 138-0025 8.15 in x 12.2 in x 1.77 in (207 mm x 310 mm x 45 mm) 18.3 lb (8.4 kg)

* Not recommended for convex radii smaller than those specified in this chart.

1-5

Wear Protection MECHANICALLY ATTACHED WEAR PLATE SYSTEM

Promotion Material CD Rom Training/Sales Presentation: A CD Rom titled “Caterpillar Mechanically Attached Wear Plate System” (PEXT7000) is available through literature distribution. This can be used by dealer machine and parts sales people for training or customer sales presentations. The CD Rom is interactive covering an Introduction, Features and Benefits, Size Comparison, How To Remove and Install and Questions and Answers. The CD plays for approximately 20 minutes and is complete with video, narration and virtual reality features. Remove and install instructions can be printed and used as a field reference. Demonstration Kit: A scale model demonstration kit (PEKP8025) is also available through literature distribution. The kit contains a full scale 20 series wear plate, base plate and compression retainer and is enclosed in a carrying case. The demonstration kit can be used in conjunction with the CD Rom when making customer presentations. Video: A six-minute video on Skeletal MAWPS — PEVN4817 Datasheet: MAWPS — PEHP7074 Skeletal MAWPS — PEHP9532 Warranty As with all Ground Engaging Tools from Caterpillar, the Mechanically Attached Wear Plate System components are warranted against breakage for the normal wear life of the product. Caterpillar will not provide warranty coverage under the breakage terms of the warranty statement if the wear plates are worn beyond the wear indicators on the wear plate.

Mechanically Attached Wear Plate Competitive Review Standard Size Comparison Part Cat Series 20 Competition Cat Series 30 Competition Cat Series 40 Competition Cat Series 50 Competition

Wear Material inch mm 0.55 14 0.31 8 0.70 18 0.63 16 1.10 28 0.63 16 1.70 43 1.38 35

Total Weight of Assembly lbs kg 20.5 9.32 18.2 8.27 28.5 12.95 46.9 21.32 41.2 18.70 46.9 21.32 72.2 32.80 108.6 49.36

% Wear Material of % Throw Away Total Assembly Weight Wear Plate 68% 35% 44% 50% 63% 32% 34% 47% 68% 22% 34% 47% 60% 21% 32% 31%

Heavy Duty Comparison Part Cat Series 20 Competition Cat Series 30 Competition Cat Series 40 Competition Cat Series 50 Competition

1-6

Wear Material inch mm 1.14 29 0.83 21 1.34 34 1.42 36 1.70 43 1.38 35 2.68 68 2.40 61

Total Weight of Assembly lbs kg 30.8 14.00 24.7 11.20 39.2 17.81 64.1 29.14 53.5 24.32 108.6 49.36 101.8 (6.30 145.6 66.18

% Wear Material of % Throw Away Total Assembly Weight Wear Plate 94% 20% 85% 24% 87% 18% 56% 23% 80% 14% 32% 23% 68% 10% 42% 18%

Wear Protection MECHANICALLY ATTACHED WEAR PLATE SYSTEM

Remove and Install Instructions 1) Locate wear area to be protected and clean free of dirt/paint/debris. Be sure to leave 2 inches (50 mm) minimum clearance from adjacent objects to allow for wear plate removal and installation. 2) Position the base plate in the desired location and weld the base plate in position welding at locations A & B as shown in the following illustration. Location C is used only for the 50 series base plate. Make one pass at a time in each location to avoid excess heat build-up. The base plate will require several passes at each location to ensure proper strength is achieved. Use the chart to determine fillet weld size and number of passes for each series base plate. Series Base Plate 20 Series 30 Series 40 Series 50 Series

Fillet Weld Size 0.6 in (15 mm) 0.6 in (15 mm) 0.7 in (18 mm) 0.8 in (20 mm)

3) Position the wear plate over the base plate and slide the wear plate onto the base. 4) Install one end of the compression retainer under the resting point. 5) Insert installation tool 160-5119 or a small pry bar with an 8 mm (0.31") width point between the base and wear plate and pry the compression retainer into place. After the retainer compresses and goes over center, it will pop into place and expand. 6) Remove the installation tool and check the compression retainer to assure it is in position. Removal 1) Clean the compression retainer opening in the wear plate free of packed material. A pneumatic chipper is the most effective method to clean the packed material. Not all packed material needs to be cleaned away to remove the retainer. 2) Insert the installation tool or a small pry bar in the slotted area of the compression retainer and pry up. The compression retainer will pop up out of the locking position. 3) Remove the retainer and slide the wear plate off the base plate.

NOTE: Compression retainers can be reused if they meet the following criteria: 1. 138-0006 no less than 87 mm (3.43") length. 138-0007 no less than 97 mm (3.82") length. 2. Retainer is no more than 2 mm (.080") out of flat. 3. There is no deformation of the retainer material.

1-7

Wear Protection WEAR BARS

WEAR BARS Wear bars provide additional blade protection in highly abrasive applications where short liner life has been encountered. Wear bars are designed to be welded on top of a wear surface. Wear bars come in different lengths to allow a customer to tailor the placement of the wear protection while minimizing the amount of throw-away iron. Part numbers for the various lengths are shown below: Wear bars are made from DH-2 steel alloy, through-hardened for greater wear resistance and strength. Core hardness of the bars will be between 45-52 Rc (2.7-3.0 BR). If the bars are to be flame cut, the burn zone must be preheated to 150-230°C. It is also recommended to preheat the bars to the 150-230°C temperature when welding. The bars are to be positioned so the bevel is next to the surface shown at right.

Part Number 107-3386 107-3387 107-3388 107-3389 107-3390 107-3391 6S-4738* 5G-3897* 5G-3488* 5G-4642* 5G-5764* 9R-0316* 5W-7943* 5W-7937* 6K-7099* 9R-5317* 8K-9916* 1V-3915* 5V-7415* 5V-7418*

Length in mm 96 2438 108 2743 132 3353 144 3658 156 3962 180 4572 82 2080 36 914 24 610 98.4 2500 83.7 2126 88.2 2240 36 914 24 610 110.2 2799 24 610 127 3226 105.7 2686 127 3226 114 2890

* Straight Base Edge without holes, can be used as wear bar.

1-8

in 8 8 8 8 8 8 6 6 6 7.5 7.5 6 6 6 8 8 9 9 9.6 9.6

Width mm 203 203 203 203 203 203 150 150 150 191 191 150 150 150 203 203 229 229 245 245

Thickness in mm 1 25 1 25 1 25 1 25 1 25 1 25 0.63 16 0.63 16 0.63 16 0.75 19 0.75 19 0.79 20 0.79 20 0.79 20 1 25 1 25 1 25 1 25 1 25 1 25

WELD HERE

BAR SURFACE

Wear Protection NOTES

1-9

Wear Protection NOTES

1-10

Bulldozers / Compactors

Bulldozers / Compactors — Section Contents Page Bulldozer Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-02 D11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-03 D10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-07 D9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 D8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-14 D7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-18 D6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-20 D5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23 D4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25 D3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27 End Bit Wear Material Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-28 Cutting Edge Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-29 800 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-31 Compactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35 Product Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-40 Hardware — Torque Requirements for Plow Bolts . . . . . . . . . . . . . . . . . . . . . .2-45 Bulldozer Conversion Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-46 Dimensions — Bulldozer Cutting Edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-49 Bulldozer End Bits Conversion Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-57 Dimensions — Bulldozer End Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-58 Dimensions — Bulldozer Wear Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-68

2-1

Bulldozers / Compactors BULLDOZER BLADES

Ground Engaging Tools – Bulldozer Blades Straight Blade (S) A good general purpose blade for most dozing applications. Available for most machines.

Universal Blade (U) A straight blade with large “wings” to carry large loads more efficiently over long distances. Available only for larger models.

Semi-U Blade (SU) A straight blade with small “wings” to provide better load carrying characteristics for mid-sized and large machines.

Cushion Blade (C) A relatively narrow blade, primarily for pushing scrapers.

Power Angle and Tilt Blade (P) A very versatile blade for smaller machines.

Angle Blade (A) An economical, light to medium duty blade designed for use on D8 and smaller machines where the ability to side-cast is desired.

2-2

Bulldozers / Compactors D11 CARRYDOZERS

CARRYDOZER GET Due to its shallow cutting edge angle (35° vs. 56°), the D11 CD blade has only 1.5" (38 mm) of usable wear surface compared to a standard dozer’s 2.618" (66.5 mm). Failure to change cutting edges and end bits at this lower wear limit will result in extensive damage to the cutting edge support, end bit support and excessive gusset wear.

The Reversible Cutting Edge System offers greater wear life along with a lower cost per hour than the One-way Cutting Edge System. For additional information, reference IRM GET05-09 (PELJ0520).

Reversible Cutting Edge System (Shown with ARM)

One-way Cutting Edge System

2-3

Bulldozers / Compactors D11 CARRYDOZERS

CUTTING EDGES Blade Model

Blade Ser. Number

11 Carrydozer

5JP, BHZ

Thickness inches mm

Type GD EWL ARM-EWL

1.77 2.36 2.36

45 60 60

Reversible Edge Qty. Part 5 5 5

One-way Edge Qty. Part

238-3171 238-3177 268-8751

5 5 5

229-7052 267-8654 268-8750

Qty.*

Bolts

8

Hardware Nuts Washers

5P-8361 3K-9770

4K-0684

* Quantity per edge or bit.

END BITS Blade Model

Thickness inches mm

Blade Ser. Number

Part Description

Part # (R-L)

5JP, BHZ

Penetration Standard Short End Bit EWL EWL - Short End Bit ARM-EWL ARM - Penetration

273-7223/4 273-7225/6 273-7228/9 273-7230/1 273-7232/3 273-7234/5 223-8127/8

11 Carrydozer

2.36

60

3.00

75

Qty.* 9

Bolts

Hardware Nuts

5P-8361

3K-9770

Washers 4K-0684

* Quantity per edge or bit.

SIDEBAR PROTECTOR Blade Model

Sidebar Protector

Qty.

Pin

Qty.

Retainer

Qty.

Adapter Plate

Qty.

11 Carrydozer

125-0800

2

8E-4708

4

4T-4707

4

135-9794

2

WELD-ON HALF-ARROW EDGE SEGMENT Blade Model 11 Carrydozer

2-4

Qty. 135-9793

2

Bulldozers / Compactors D11 BULLDOZERS

CUTTING EDGES Blade Model

Blade Ser. Number

11SU

4BB, 4KB, 9NH, 1AP, 4XP, 8PP

11U

4CB, 5TB, 9MH, 9ZH, 4YP, 8RP

Thickness inches mm

Type GD

1.77

45

EWL

2.36

60

EEWL

3.00

75

GD

1.77

45

2.36

60

3.00

75

OFFSET

EWL ARM-EWL

EEWL

C — Center Edge E — End Edge I — Intermediate Edge * Number of bolts and nuts required per edge. ** Also use 4K-0684 washers. EEWL is an extra thick edge for high face wear reclamation applications. # 195-5118 same as 138-6483 with one sharp edge.

Qty.

Part

Qty.*

2 2 2 2 2 2 1 2 2 2 1 1 1 1 2 2 2 1 1 1 2 2 1

9W-2426–C 9W-2425–E 9W-4495–C 9W-4494–E 135-9577–E 135-9578–C 9W-2426–C 9W-2425–E 9W-2424–I 138-6483# 138-6484 138-6485 138-6486 9W-4495–C 9W-4494–E 9W-4493–I 195-9173 195-9174 195-9175 201-1231 195-7187 135-9577 135-9578

9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

GD — General Duty

Hardware Bolts

Nuts

5P-8823

3K-9770**

5P-8823

3K-9770**

EWL — Extended Wear Life

END BITS Blade Model 11SU, 11U

Blade Ser. Number

EWL (R-L)

ARM-EWL (R-L)

GD (R-L)

OS (R-L)

Utility (R-L)

Thickness inches mm

4BB, 4KB, 8E-4545/6 195-7171/2 8E-4543/4 136-6753/4# 8E-9785/6 b 2.36 9NH, 1AP, 8PP 109-9053/4 4CB, 5TB, 9MH, 8E-9748/9 3.00 9ZH, 4YP, 8RP

EWL — Extended Wear Life GD — General Duty * Number of bolts and nuts required per end bit. ** Also use 4K-0684 washers. a Quantity per end bit. b Level cut 136-8778/9. # 195-5117/6 same as 136-6753/4 with one sharp edge.

60

Qty.* 9a

Hardware Bolts Nuts 5P-8823 3K-9770**

75

OS — Offset

DOZER HEAVY DUTY MINING GET HD Edge*

HD End Bit**

Blade Model

Blade Ser. Number

Part Number

inches

mm

Part Number

11SU

4BB, 4KB, 9NH, 1AP, 8PP 4CB, 5TB, 9MH, 9ZH, 8RP

(1) 107-3523 a

2.36

60

(1) 109-9050 c

2.36

60

11US

inches

Hardware mm

Qty.

Bolts

Nuts

107-3521/22 b 4.72

120

44

5P-8823

3K-9770

(2) 109-9047 d*** 4.72

120

45

5P-8823

3K-9770

HD — Heavy Duty * Thick one-piece edge. ** Thick flush end bit. *** Combination end edge and end bit; double thickness, 1/2 of length. a Edge bolt quantity is 28. b End bit bolt quantity is 16. c Edge bolt quantity is 21. d End bit bolt quantity is 24.

2-5

Bulldozers / Compactors D11 BULLDOZERS

WEAR PLATES Blade Model 11SU

Blade Ser. Number 4BB, 4KB, 9NH, 1AP

Location Right End Right Center Center Left Center Left End Right End Center Left End Push Plate Right End Center Left End Right End Right Center Center Left Center Left End Right End Center Left End Right End Center Left End Right End Center Left End

5-Piece Set

3-Piece Set

11US

8PP

3-Piece Set

4CB, 5TB, 4CB UP to 00787

5-Piece Set

3-Piece Set 4CB for 00788 and UP, 9MH, 9ZH 8RP

3-Piece Set 3-Piece Set

Thickness inches mm 0.63 16

Part 4T-8143 4T-8145 4T-5308 4T-8146 4T-8144 4T-8143 6Y-1100 4T-8144 4T-5308 136-3984 136-3986 139-3985 4T-7629 4T-7632 4T-5308 4T-7631 4T-7630 4T-7629 6Y-1319 4T-7630 122-2320 122-2322 122-2321 126-8341 126-8343 126-8342

0.55

14

0.63

16

0.55

14

SIDEBAR PROTECTOR Blade Model

Sidebar Protector

Qty.

Pin

Qty.

Retainer

Qty.

Adapter Plate

Qty.

D11

125-0800

2

8E-4708

4

4T-4707

4

135-9794

2

WELD-ON HALF-ARROW EDGE SEGMENT Blade Model D11

Weld-On Half-Arrow Edge Segment

Qty.

135-9793

2

RECOMMENDED WEAR BARS Blade Model

Right Wing inches mm

Wear Bars Center inches mm

11SU

20

508

20

508

175.3

4452

11US

59.5

1511

59.5

1511

134

3404

* Provides 2 wear bar coverage full width of blade.

2-6

Dimensions Left Wing inches mm

Length feet

mm

Qty.

Part No.

15 8 11

4572 2438 3353

2* 1* 4*

107-3391 107-3386 107-3388

Bulldozers / Compactors D10 BULLDOZERS

CUTTING EDGES Thickness inches mm

Blade Model

Blade Ser. Number

Type

10C 10SU

83W 79W

FD FD

1.38 1.38

35 35

GD

1.57

40

GD

1.77

45

EWL

2.00

50

EWL

2.36

60

GD

1.38

35

EWL

1.77

45

ARMEEWL

2.36

60

EEWL**

2.95

75

FD

1.38

35

GD

1.57

40

GD

1.77

45

EWL

2.00

50

EWL

2.36

60

GD

1.38

35

EWL

1.77

45

ARMEEWL

2.36

60

1RH, 7RH, 4KP, 6EP, BHJ, BHA

EEWL**

10U

80W

1SH, 7WH, 4LP, 6FP, BHF, BHP

EEWL** C — Center Edge E — End Edge FD — Finish Dozing * Per edge. ** EEWL is an extra thick edge for high face wear reclamation applications. a Uses 5P-8250 washers. b Uses 4K-0684 washers.

Qty.

Part

Qty.*

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 2 2 2 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 1 1 3 2

9J-3751–E 1U-4459–C 1U-4455–E 4T-0081–C 4T-0082–E 6Y-0016–C 6Y-0017–E 4T-0607–C 4T-0604–E 6Y-0020–C 6Y-0021–E 9W-6609–C 9W-6608–E 9W-6656–C 9W-6657–E 195-9170–E 195-9171–C 201-1230–E 8E-2085–C 8E-2086–E 135-9580–C 135-9579–E 1U-4458–C 1U-4457–E 4T-0083–C 4T-0084–E 6Y-0018–C 6Y-0019–E 4T-0609–C 4T-0608–E 6Y-0023–C 6Y-0022–E 9W-6615–C 9W-6608–E 9W-6658–C 9W-6657–E 223-8149–C 195-9170–E 201-1230–E 8E-2087–C 8E-2086–E

10 9 9 9 9 9 9 9 9 9 9 6 5 6 5 5 6 5 6 5 6 5 9 7 9 7 9 7 9 7 9 7 5 5 5 5 5 5 5 5 5

GD — General Duty

Hardware Bolts

Nuts

8J-2928 5P-8823

2J-3507 a 3K-9770 b

5P-8823

3K-9770 b

EWL — Extended Wear Life

D10 BULLDOZERS

2-7

Bulldozers / Compactors D10 BULLDOZERS

END BITS Blade ARMAbrasion/ Thickness Blade Ser. EWL EWL GD Finish Impact Utility Model Number (R-L) (R-L) (R-L) (R-L) (R-L) (R-L) inches mm 10C 83W (2) 4T-6538 10SU, 79W, 80W 8E-4545/6 8E-4543/4 8E-9785/6 2.36 60 10U 8E-9748/9 2.95 75 4KP, 6EP, 8E-4541/2 195-7173/4 8E-4199/8 7T-4689/8–HC 100-3131/2 1.75 45 1RH, 1SH, 100-3133/4 2.36 60 4LP, 6FP, 136-8755/4 2.95 75 7RH, 7WH, BHA, BHJ, BHF, BHP HC — Hot cupped design a Also use 5P-8250 washers. b Also use 4K-0684 washers. c Quantity per end bit.

Hardware Qty. Bolts Nuts 6 c 8J-2928 a 2J-3507 9 c 5P-8361 b 3K-9770 7c 7 c 5P-8823 b 3K-9770

GD — General Duty

DOZER HEAVY DUTY MINING GET HD Edge* Blade Model 10SU 10US

Blade Ser. Number

Part Number

HD End Bit**

Hardware

inches

mm

Part Number

mm

Qty.

2.36

60

107-3515/16 b 4.72

120

34

5P-8823 e 3K-9770

2.36

60

(2) 113-0338 d*** 4.72

120

33

5P-8823 e 3K-9770

1RH, 7RH, 4KP, 6EP, (1) 107-3510 a BHJ, BHA 1SH, 7WH, 4LP, 6FP, (3) 8E-2087 c00 BHF, BHP

inches

Bolts

Nuts

HD — Heavy Duty * Thick one-piece edge. ** Thick flush end bit. *** Combination end edge and end bit; double thickness, 2/3 of length. a Edge bolt quantity is 22. b End bit bolt quantity is 6 each. c Edge bolt quantity is 5 each. d End bit bolt quantity is 9 each. e Also use 4K-0684 washers.

SIDEBAR PROTECTOR Blade Model

Sidebar Protector

Qty.

Pin

Qty.

Retainer

Qty.

Adapter Plate

Qty.

D10

125-0800

2

8E-4708

4

4T-4707

4

135-9794

2

NOTE: For more information on D10 and D11 Sidebar Protector, refer to GET 99-30, PELM0918.

WELD-ON HALF-ARROW EDGE SEGMENT Blade Model

Weld-On Half-Arrow Edge Segment

Qty.

D10

135-9793

2

2-8

Bulldozers / Compactors D10 BULLDOZERS

WEAR PLATES Blade Model

Blade Ser. Number

10C 10SU

83W 79W1-536

Location

79W537-UP

5-Piece Set

1RH, 7RH, 4KP, 6EP, BHA, BHJ

5-Piece Set

Push Plate Wear Plates Push Plate Right End Right Center Center/Push Left Center Left End Right End Right Center Center Left Center Left End Right End Center Left End Push Plate All Right End Right Center Center Left Center Left End Right End Right Center Center Left Center Left End Right End Center Left End Right End Center Left End

3-Piece Set

10U

80W1-467 80W468-UP

5-Piece Set

1SH, 7WH

5-Piece Set

3-Piece Set 4LP, 6FP, BHF, BHP

Qty.

3-Piece Set

8

9

Thickness inches mm

Part 9J-4567 3G-6344 3G-6343 4T-3722 4T-3725 1U-3697 4T-3724 4T-3723 218-3922 9W-7260 9W-2409 9W-7261 218-3923 218-3922 218-3924 218-3923 9W-2409 3G-6344 4T-3726 4T-3729 1U-3697 4T-3728 4T-3727 9W-7263 9W-7262 9W-2409 9W-7264 9W-7265 9W-7263 6Y-1080 9W-7265 218-3939 218-3941 218-3940

0.79 0.47 0.63 0.63

20 12 16 16

0.55 0.63

14 16

0.55

14

0.63 0.47 0.63

16 12 16

0.55

14

RECOMMENDED WEAR BARS Blade Model

Right Wing inches mm

Dimensions Left Wing inches mm

Wear Bars Center inches mm

10N, SU

16.3

415

16.3

415

155

3932

10N, U

49.8

1264

49.8

1264

107.9

2740

Length feet

mm

Qty.

Part No.

13 8 9

3962 2438 2743

2* 1* 4*

107-3390 107-3386 107-3387

* Provides 2 wear bar coverage full width of blade.

2-9

Bulldozers / Compactors D9 BULLDOZERS

CUTTING EDGES Blade Model

Blade Ser. Number

9A

52C, 90D, 11E, 26E

9C 9R 9SU

70F, 45G 20Y 39K 21E1–831, 25E, 06A

53C, 89D, 21E832-UP 05A, 18K, 46K, 73R, 61U

18Y1-1875, 52Y, 42S

18Y1876-UP

1MH, 5BH, 1LP, 2LP, 7NH, 2ZP, 2BP, 9LH, 9RP, CLC, CLN, CLY, CMA, T9J

Type

Thickness inches mm

FD

1.12

28

EWL

1.62

41

FD

1.12

28

FD EWL FD

1.12 1.62 1.12

28 41 28

EWL

1.62

41

FD EWL FD GD EWL EWL FD

1.12 1.62 1.12 1.38 1.62 1.57 1.12

28 41 28 35 41 40 28

GD

1.38

35

GD

1.38

35

EWL

1.62

41

EWL2**

1.77

45

GD

1.38

35

EWL

1.77

45

FD

1.10

28

GD

1.38

35

EWL

1.77

45

Qty.

Part

Qty.

1 2 1 2 1 2 3 3 1 2 1 2 2 2 3 3 3 3 1 2 1 2 1 1 1 1 2 1 1 1 2 2 2 2 1 2 1 2 1 2

4T-6388–C 4T-6387–E 7J-2966–C 7J-2965–E 4T-6450–C 4T-6388–E 4T-6386 7J-2980 4T-6459–C 4T-6456–E 7J-2961–C 7J-2960–E 4T-6448 7J-2962 4T-6386 9W-4500 7J-2980 7T-4342* 4T-6386–C 4T-6385–E 9W-4500–C 9W-4502–E 6Y-0310*–C 6Y-0311*–L 6Y-0312*–R 7J-2980–C 9W-4508–E 6Y-0476*–C 6Y-0477*–L 6Y-0478*–R 7T-9782–C 7T-9779–E 9W-3928–C 9W-3930–E 6Y-5539–C 6Y-5540–E 7T-5702–C 7T-9125–E 9W-7043–C 112-2471–E

7 9 7 9 15 7 7 7 9 6 9 6 10 10 7 7 7 7 7 8 7 8 7 8 8 7 8 7 8 8 6 5 6 5 12 5 12 5 12 5

C — Center Edge E — End Edge L — Left End R — Right End FD — Finish Dozing GD — General Duty EWL — Extended Wear Life * Wider edges with offset bolt holes. Use only with 7T-4092/3 (long side) or 9W-9193/4 (short side). ** EWL2 is an extra thick edge for high face wear reclamation applications. a Uses 3K-5234 washers. b Uses 4K-0684 washers. c Uses 5P-8250 washers.

2-10

Hardware Bolts

Nuts

8J-2928

2J-3507 c

8J-2928

2J-3507 c

8J-2928

2J-3507 c

8J-2928

2J-3507 c

4J-9208 4J-9208

2J-3507 c

4J-9208 a 2J-3507 c 4J-9058 c 8J-2928 4J-9058 c 4J-9208 2J-3507 c 1J-4948 4J-9208

6V-8360 3K-9770 b 5P-8823 4J-9208

2J-3507 c

Bulldozers / Compactors D9 BULLDOZERS

CUTTING EDGES — Continued Thickness inches mm

Blade Model

Blade Ser. Number

Type

9U

55C

FD

1.12

28

EWL

1.62

41

FD

1.12

28

GD

1.38

35

EWL

1.62

41

EWL

1.57

40

FD

1.12

28

GD

1.38

35

GD

1.38

35

EWL

1.62

41

EWL

1.62

41

EWL2

1.77

45

GD

1.38

35

EWL

1.77

45

FD

1.12

28

GD

1.38

35

EWL

1.77

45

FD

1.12

28

14C, 19K, 78X

19Y1-1474, 78S

19Y1475-UP

1LH, 2ZH, 1MP, 7PH, 9MP, CMH, CMN, CMS, CMW, CMZ, T9H 9USXS

20H

Qty.

Part

Qty.

1 2 1 2 3 2 3 2 3 2 3 1 1 2 2 2 2 2 1 1 2 2 2 1 1 2 1 1 3 2 3 2 1 2 1 2 1 2 4 3 2

4T-6453–C 4T-6457–E 7J-2963–C 7J-2964–E 4T-6378–C,E 4T-6379–I 9W-6092–C,E 9W-9197–I 7J-2959–C,E 7J-2979–I 7T-4341*–C,E 7T-4336*–LI 7T-4337*–RI 4T-6381–C 4T-6382–E 7T-9126–C 9W-4503–E 6Y-0313*–C 6Y-0315*–L 6Y-0314*–R 9W-4507–C 9W-4506–E 7T-4335*–C 7T-4344*–L 7T-4343*–R 6Y-0479*–C 6Y-0481*–L 6Y-0480*–R 9W-0775–C 7T-9781–E 9W-3931–C 9W-3929–E 6Y-5538–C 6Y-5540–E 7T-5701–C 7T-9125–E 9W-7044–C 112-2471–E 4T-6378 4T-6377 4T-6379

13 6 13 6 6 4 6 4 6 4 6 4 4 9 6 9 6 9 6 6 9 6 9 6 6 9 6 6 5 5 5 5 15 5 15 5 15 5 6 4 4

C — Center Edge E — End Edge I — Intermediate RI — Right Intermediate LI — Left Intermediate R — Right End * Wider edges with offset bolt holes. Use only with 8E-4541/2 (long side) or 8E-4199/8 (short side). a Uses 3K-5234 washers. b Uses 4K-0684 washers. c Uses 5P-8250 washers.

L — Left End GD — General Duty

Hardware Bolts

Nuts

4J-9058

2J-3507 c

4J-9058 a 2J-3507 c 4J-9058 c 4J-9208 4J-9058 c 4J-9208

2J-3507 c

1J-4948

6V-8360 3K-9770 b 5P-8823 4J-9208

2J-3507 c

4J-9058

2J-3507 c

FD — Finish Dozing EWL — Extended Wear Life

2-11

Bulldozers / Compactors D9 BULLDOZERS

END BITS Blade Model 9A 9C 9R 9SU

9U

Blade Ser. Number

EWL (R-L)

52C, 90D, 11E, 26E 70F, 45G 20Y 39K 53C, 89D, 21E, 25E, 18K, 46K, 73R, 61U 18Y, 52Y, 42S

GD* Thickness inches mm

(R-L)

4J-8723/4 1.25 3G-8291/2 1.38 3G-8283/4 1.57

Utility Thickness (R-L) inches mm

Finish (R-L)

32 35 40

5J-1279/80 3G-8289/90 3G-8281/82 9W-9193/4 8E-4541/2 1U-1545/6 8E-4199/8 a 7T-4689/8 1MH, 5BH, 2BP, 2ZP, 8E-4539/40 8E-4197/6 1LP, 2LP, 7NH, 9LH, 9RP, CLC, CLN, CLY, CMA, CMN, T9J 55C, 14C, 19K, 7T-4095/4 4J-8723/4 20H, 78X, CMH 3G-8291/2 3G-8283/4 8E-4197/6 19Y, 78S 8E-4541/2 1U-1545/6 8E-4199/8 a 7T-4689/8 1LH, 2ZH, 8E-4539/40 8E-4197/6 1MP, 7PH, CMS, CMW, CMZ, 9MP, T9H

1.25 1.38 1.57 1.97 1.57 2.16 2.36 1.97

32 35 40 50 40 55 60 50

1.25 1.38 1.57 1.97 1.57 2.16 2.36 1.97

32 35 40 50 40 55 60 50

Hardware Bolts Nuts

7 d 8J-2928 c 2J-3507 7c 5d 7d 7d

(2) 4T-6389 4T-6391/2 7T-4093/2

Qty.

4J-9208 c 2J-3507 4J-9058 c 8J-2928 c 2J-3507 8J-2928 c 2J-3507

3G-7763/4 100-3131/2 100-3133/4

1.75 45 7 d 5P-8823 b 3K-9770 2.36 60

6Y-4277/8 100-3135/6 100-3137/8

1.75 45 7 d 4J-9208 c 2J-3507 2.36 60 7 d 8J-2928 c 2J-3507

3G-7763/4 100-3131/2 100-3133/4

1.75 45 7 d 5P-8823 b 3K-9770 2.36 60

6Y-4277/8 100-3135/6 100-3137/8

1.75 45 7 d 4J-9208 c 2J-3507 2.36 60

* Part numbers that begin with: 3G, 1U, 7T = Hot cupped, Abrasion. 4J, 5J, 1U, 7T = Impact. a Use only with 16" (406 mm) wide edges. b Use 4K-0684 washers. c Use 5P-8250 washers. d Quantity per end bit.

DOZER HEAVY DUTY MINING GET HD Edge Blade Model

Blade Ser. Number

Part Number

inches

9SU

2BP, 7NH, 9LH, 1MH, 1LP, 2LP, 5BH, T9J

(2) 113-0321 a (1) 113-0322 c

2.36

HD End Bit

Hardware

mm

Part Number

inches

mm

Qty.

Bolts

Nuts

60

113-0332 b-RH 113-0333 d-LH

4.72

120

36 19

4J-9208 e

2J-3507

HD — Heavy Duty a Edge bolt quantity is 5 each. b End bit bolt quantity is 7. c Edge bolt quantity is 12. d End bit bolt quantity is 7. e Also use 5P-8250 washers.

SIDEBAR PROTECTOR Blade Model

Sidebar Protector

Qty.

Pin

Qty.

Retainer

Qty.

Adapter Plate

Qty.

D9, D8

9J-9600

2

135-9350

4

8E-6359

4

152-0027

2

NOTE: For more information on D8 and D9 Sidebar Protector, refer to IRM 01-14, PELM1017.

2-12

Bulldozers / Compactors D9 BULLDOZERS

WEAR PLATES Blade Model

Serial Number

Location

9A 9R

52C, 90D, 11E, 26E 63E, 39K

9SU

53C, 89D, 21E, 25E, 06A 18K, 46K, 73R, 61U, 05A 18Y1-1875, 52Y1-1875, 425

5-Piece Set

All Push Plate

4-Piece Set

18Y1876-UP

5-Piece Set

1MH, 5BH, 7NH, 1LP, 2LP, 2ZP, CLY, CMA, T9J

5-Piece Set

3-Piece Set

9RP, CLC 9U

3-Piece Set

55C 14C, 19K, 78X 19Y1-1474, 78S1-1474

5-Piece Set

All Push Plate 19Y1475-UP

5-Piece Set

1LH, 2ZH, 7PH, 1MP, 9MP, CMS, CMZ, T9H

3-Piece Set

CMH, CMN 70F, 45G, 20YI-533, 20Y543

9C

Qty.

All Sides Center Wear Plates Push Plate Wear Plates Push Plate Right End Right Center Center/Push Left Center Left End Push Plate Push Plate Right End Right Center Center/Push Left Center Left End Right End Right Center Center Left Center Left End Right End Center Left End Push Plate Right End Center Left End Wear Plates Push Plate Wear Plates Right End Right Center Center Left Center Left End Push Plate Right End Right Center Center Left Center Left End Right End Center Left End Push Plate Push Plate Push Plate Push Plate

5 4 1 4 1 4 1

4 1

4 1 4

1

1 1 1

Part Number

Thickness inches mm

3J-3380 6J-9249 6J-9248 2J-8523 2J-8524 6J-9249 6J-9248 4T-3730 4T-3732 1U-0902 4T3733 4T3731 1U-0903 1U-0902 9W-1258 9W-1259 9W-0810 9W-1260 9W-1261 218-3885 9T-0251 7T-5803 9T-0252 218-3887 218-3885 218-3888 218-3887 7T-5803 218-3885 218-3888 218-3887 2J-8525 2J-8524 6J-9269 4T-3734 4T-3736 1U-0902 4T-3737 4T-3735 1U-0903 9W-0812 9W-0809 9W-0810 9W-0811 9W-0808 217-7155 217-7156 217-7157 7T-5803 4J3868 9J-4567 4T-9534

0.47 0.47 0.63 0.47 0.79 0.47 0.63 0.63 0.63 0.63 0.63 0.63 0.47 0.63 0.63 0.63 0.63 0.63 0.63 0.55 0.63 0.63 0.63 0.55 0.55 0.55 0.55 0.63 0.55 0.55 0.55 0.47 0.79 0.47 0.63 0.63 0.63 0.63 0.63 0.47 0.63 0.63 0.63 0.63 0.63 0.55 0.55 0.55 0.63 0.63 0.79 0.79

12 12 16 12 20 12 16 16 16 16 16 16 12 16 16 16 16 16 16 14 16 16 16 14 14 14 14 16 14 14 14 12 20 12 16 16 16 16 16 12 16 16 16 16 16 14 14 14 16 16 20 20

RECOMMENDED WEAR BARS Blade Model

Right Wing inches mm

Dimensions Left Wing inches mm

Wear Bars Center inches mm

9N, SU

13.4

340

13.4

340

139.7

3548

9N, U

45

1144

45

1144

93

2364

Length feet

mm

Qty.

Part No.

12 8 8

3658 2438 2438

2* 1* 4*

107-3389 107-3386 107-3386

* Provides 2 wear bar coverage full width of blade.

2-13

Bulldozers / Compactors D8 BULLDOZERS

CUTTING EDGES Qty.

Part

Qty.

Hardware Bolts

Nuts

4T-2943 4T-2888 9W-8657 4T-6532 6Y-6761 107-3474* 7T-4348* 4T-2994 9W-8658 107-3484* 7T-4351* 4T-2988–C 4T-2987–E 9W-8655–C** 9W-8657–E** 1U-4933–C 1U-4932–E 107-3479–C 107-3481–E 7T-4353–C* 7T-4352–E* 9W-5432 9W-9098 112-2474 135-9373 135-9628 135-9629 4T-2867 4T-3418 4Z-9058 6Y-5540 4T-2944 4T-2860

16

1J-6762

2J-3506

6

5J-2409

2J-3505

8

4J-9058

2J-3507

7 6 7 6 7 6 7 6 7 6 8 8 8 8

4J-9208

2J-3507 a

4F-4042

2J-3507 b

4F-4042

2J-3507 b

13 10 13 5 13

5J-2409 5J-2409 4J-9058

2J-3505 2J-3505 2J-3507 b

19 25

2 2 2 4 4 4 4 3 3 3 3 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 1 2 1 2 2 2

1J-6762

2J-3506

1.00

25

2

4T-2862

10

1J-6762

2J-3506

FD GD EWL EWL FD GD EWL EWL FD GD EWL EWL FD

1.00 1.38 1.57 1.57 1.00 1.38 1.57 1.77 1.00 1.38 1.77 1.57 1.12

25 35 40 40 25 35 40 45 25 35 45 40 28

5J-2409

2J-3505

10

5J-2409

2J-3505

7

4J-9058

2J-3507

2J-3507

35

GD

1.38

35

EWL

1.77

45

EWL

1.57

40

6 5 6 5 6 5 6 5 6 5 5

4J-9208

1.38

4T-6531 6Y-6764 6Y-5776* 107-3477 4T-3418 6Y-6763 6Y-5777* 107-3476 4T-2988 9W-8657 107-3479 7T-4353* 4T-3423–C 4T-3417–E 1U-4930–C 1U-4929–E 6Y-6358–C** 6Y-6359–E** 107-3482–C 107-3480–E 7T-5235–C* 7T-4346–L* 7T-4345–R*

10

GD

2 2 2 2 2 2 2 2 3 3 3 3 2 2 2 2 2 2 2 2 2 1 1

Thickness inches mm

Blade Model

Blade Ser. Number

8A

07A, 18C, 33D, 99D, 87D, 07E, 22E, 72D 28E1-11125

FD FD GD FD GD EWL

0.75 1.00 1.38 1.00 1.38 1.57

19 25 35 25 35 40

28E11126-UP, 93E, 14F, 77C

FD GD EWL

1.00 1.38 1.57

25 35 40

05Y, 41Z, 27B

FD

1.00

25

GD

1.38

35

GD

1.38

35

EWL

1.77

45

EWL

1.57

40

FD GD EWL FD GD EWL FD FD FD

1.12 1.38 1.77 1.12 1.38 1.77 1.00 1.00 1.12

28 35 45 28 35 45 25 25 28

FD FD

0.75 1.00

FD

1HH, 2XP, 9AH, 6NH, 4ZP BHR, 9ZP, DZD, D1E, D1F 8C 8R 8SU LGP

71F, 77G 43K KMB, LAA, DZC

8SU

08A, 12C, 18C, 32D,03E, 86D, 44C1-1192 44C1193-UP, 73D 78C, 29E, 94E

69E, 14J, 44K, 95S, 80V, 47K

29V, 30W 68V, 60V

04Y1-1939

Type

C — Center Edge E — End Edge L — Left End R — Right End FD — Finish Dozing GD — General Duty * EWL — wider edges with offset bolt holes. Use only with EWL end bits - 7T-4088/9 (long side) and 9W-8651/2 (short side). ** 11" (280 mm) wide edges. a Uses 3K-5234 washers. b Uses 5P-8250 washers.

2-14

EWL — Extended Wear Life

Bulldozers / Compactors D8 BULLDOZERS

CUTTING EDGES — Continued Blade Model 8SU (Cont.)

Type

04Y1940-UP

FD

1.12

28

GD

1.38

35

EWL

1.77

45

FD

1.12

28

GD

1.38

35

EWL

1.77

45

FD

1.00

25

FD

1.00

25

GD

1.38

35

EWL

1.77

45

EWL

1.57

40

FD

1.00

25

GD

1.38

35

EWL

1.77

45

EWL

1.57

40

FD

1.00

25

GD

1.38

35

EWL

1.77

45

EWL

1.57

40

FD

1.00

25

GD

1.38

35

GD

1.38

35

EWL

1.77

45

EWL

1.57

40

FD

1.12

28

GD

1.38

35

EWL

1.77

45

FD

1.12

28

GD

1.38

35

EWL

1.77

45

1KH, 2PP, 2TP, 3MP, 3WH, 1HP, 6LH, 9BH, 9PH, 2NP, 05A, 9TP, BHW, B8S, DZA 8U

Thickness inches mm

Blade Ser. Number

11C, 74D, 88D, 24E 30E, 73E, 29J

20F, 45K, 48K

30V, 65X, 69V, 34W

6Y1-1395

6Y1396-UP, 42Z, 82M

1JH, 2WP, 6AH, 9CH, 9WP, CXB, A5G, DZB

Qty.

Part

Qty.

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2 2 1 1 1 2 1 2 1 2 2 2 2 2 2 2

4T-9586–C 6Y-5540–E 9W-4396–C 9W-4398–E 9W-3925–C 9W-3927-E 4T-6381-C 6Y-5540-E 7T-9126-C 7T-9125-E 112-2472-C 112-2471-E 4T-3419 4T-2861-E 4T-6513-C 4T-6532-E 6Y-6765-C 6Y-6761-E 107-3478 107-3474 7T-4355-C* 7T-4348-E* 4T-6513-C 4T-6512-E 6Y-6765-C 6Y-6762-E 107-3478 107-3475 7T-4355-C* 7T-4354-E* 4T-2986-C 4T-2987-E 9W-8656-E 9W-8655-C 107-3473 107-3481 7T-4352-C* 7T-4349-L* 7T-4350-R* 4T-3422-C 4T-3417-E 1U-4931-C 1U-4929-E 6Y-6360-C** 6Y-6359-E** 107-3483-C 107-3480-E 7T-4347-C* 7T-4346-L* 7T-4345-R* 4T-9590-C 4T-9587-E 9W-4397-C 9W-4398-E 9W-3926-C 9W-3927-E 4T-6378-E 9W-5232-C 9W-6092-C 7T-9127-E 112-2475-C 112-2473-E

11 5 11 5 11 5 9 5 9 5 9 5 12 9 10 6 10 6 10 6 10 6 10 6 10 6 10 6 10 6 5 6 5 6 5 6 6 5 5 7 5 7 5 7 5 7 5 7 5 5 14 5 14 5 14 5 6 5 6 5 6 5

Hardware Bolts

Nuts

4J-9058

2J-3507 a

4J-9058

2J-3507 a

1J-6762

2J-3506

5J-2409

2J-3505

5J-2409

2J-3505

4J-9058

2J-3507

4J-9208 a

2J-3507

4J-9058

2J-3507

4J-9058

2J-3507 a

C — Center Edge E — End Edge L — Left End R — Right End FD — Finish Dozing GD — General Duty EWL — Extended Wear Life * EWL — wider edges with offset bolt holes. Use only with EWL end bits — 7T-4090/1 (long side) and 9W-8653/4 (short side). ** 11" (280 mm) wide edges. a Uses 5P-8250 washers.

2-15

Bulldozers / Compactors D8 BULLDOZERS

END BITS Blade Model

Blade Ser. Number

8A

07A, 18C, 33D, 72D, 87D, 99D 07E, 22E 28E1-11125, 93E, 14F, 77C

EWL (R-L)

28E11126-UP

7T-4091/0

05Y, 41Z, 27B

7T-4091/0

8C

6NH, 1HH, 8E-4537/8 2XP, 9AH, 4ZP, BHR, 9ZP, DZD 71F, 77G

8R

43K

8SU

08A, 12C, 18C, 86D, 44C, 32D, 73D, 03E 78C, 29E, 94E, 69E, 14J, 44K, 47K 29V, 30W, 68V, 7T-4088/9 60V

8U

04Y1-1939

7T-4091/0

04Y1940-UP

8E-4539/40

9PH, 3WH, 8E-4537/8 1HP, 6LH, 9BH, 2NP, 1KH, 2PP, 2TP, 3MP, 05A, 9TP, KMB, LAA, BHW, B8S, DZA 11C, 74D, 7T-4091/0 88D, 24E 30E, 73E, 20F, 45K, 48K, 29J 30V, 65X, 69V, 06Y1-1395, 34W

7T-4091/0

06Y1396-UP, 42Z, 8ZM

8E-4539/40

9CH, 1JH, 2WP, 8E-4537/8 6AH, 9WP, CXB, A5G, DZB

(R-L)

GD* Thickness inches mm

Finish (R-L)

Hardware Bolts Nuts

3J-2465/6

1.00

25

4T-6667/8

7

1J-6761

2J-3506

4J-8843/4 3G-8315/6 3G-8285/6 9J-1477/8 3G-8317/8 3G-8287/8 9W-8653/4 9J-1477/8 3G-8317/8 3G-8287/8 9W-8653/4 8E-4193/4

1.12 1.12 1.57 1.12 1.18 1.57 1.97 1.12 1.18 1.57 1.97 1.57

28 28 40 28 30 40 50 28 30 40 50 40

4T-6505/6

7

5J-2409

2J-3505

4T-6239/40

7

4J-9058 b 2J-3507

4T-8089/90

7

4J-9058 b 2J-3507

7

4F-4042 b 2J-3507

4J-8843/4 1.12 3G-8315/6 1.12 3G-8285/6 1.57

28 28 40

4T-6505/6

7

5J-2409

2J-3505

4T-6669/70 7J-2975/6 a 4T-6671/2

7

5J-2409

2J-3505

7

1J-6761

2J-3506

7

5J-2409

2J-3505

4T-6671/2

6Y-4277/8

100-3139/40 1.97 50 136-8757/6 2.36 60

1.00

25

4J-8849/50 1.12 3G-8299/3001.12 3G-8277/8 1.57 9J-1479/80 1.12 3G-8301/2 1.12 3G-8279/80 1.57 9W-8651/2 1.97 9J-1477/8 1.12 3G-8317/8 1.18 3G-8287/8 1.57 9W-8653/4 1.97 4J-8723/4 1.12 3G-8291/2 1.38 3G-8283/4 1.57 8E-4197/6 1.97 8E-4193/4 1.57

28 28 40 28 28 40 50 28 30 40 50 28 35 40 50 40

3J-2465/6

1.12

28

4T-6667/8

7

1J-6762

2J-3506

4J-8843/4 3G-8315/6 3G-8285/6 9J-1477/8 3G-8317/8 3G-8287/8 9W-8653/4 4J-8723/4 3G-8291/2 3G-8283/4 8E-4197/6 8E-4193/4

1.12 1.12 1.57 1.12 1.18 1.57 1.97 1.12 1.38 1.57 1.97 1.57

28 28 40 28 30 40 50 28 35 40 50 40

4T-6505/6

7

5J-2409

2J-3505

4T-6239/40 4T-8089/90

7

4J-9058 b 2J-3507

1.75 45 2.36 60

7

4J-9208 b 2J-3507

100-3139/40 1.97 50 136-8757/6 2.36 60

7

4J-9058 b 2J-3507

7

4J-9058 b 2J-3507

7

4J-9208 b 2J-3507

1.75 45 2.36 60

7

4J-9208 b 2J-3507

100-3139/40 1.97 50 136-8757/6 2.36 60

7

4J-9058 b 2J-3507

4T-8089/90

100-3135/6 100-3137/8 6Y-4277/8

100-3135/6 100-3137/8 6Y-4277/8

* Part numbers that begin with: 3G = Hot cupped, Abrasion. EWL — Extended Wear Life 3J, 4J, 9J = Impact. a 1.57" (40 mm) thick. b Uses 5P-8250 washers.

2-16

Utility Thickness (R-L) inches mm Qty. c

GD — General Duty c Quantity per end bit.

Bulldozers / Compactors D8 BULLDOZERS

WEAR PLATES Blade Model

Blade Ser. Number

8A

28E, 93E, 14F, 77C, 2XP, 4ZP, 054, 412, 27B, 9AH, 6NH 71F, 77G 43K 78C, 29E, 94E

8C 8R 8SU

04Y1940-UP, 74M, 402, 9TB, 26B

5-Piece Set

1KH, 2PP, 2TP, 3MP, DZA, B8S, 2NP, 9BH, 9PH, 1HP, 6LH

5-Piece Set

3-Piece Set

8U

30E, 73E, 29J 20F, 45K, 48K 30V, 65X, 69V, 34W

06Y1-1395, 42Z, 82M 06Y1396-UP

Part

Wear Plates

5

2J-8526

0.40

10

2J-9418 6J-9285 4J-4205 4J-4129 6J-9286 9J-1659 9J-6870 1U-4417 6J-9248 9T-0249 9T-0251 4T-9592 9T-0252 9T-0250 9W-2757 9W-2758 9W-2756 9W-2759 9W-2760 9W-2757 9W-1771 9W-2760 9W-2756 4J-4205 4J-4129 6J-9286 9J-1659 9J-7539 (RH) 9J-7540 (LH) 9J-6870 1U-4417 9T-0255 9T-0253 4T-9592 9T-0254 9T-0256 6Y-7245 6Y-7244 6Y-7246

0.63 0.63 0.47 0.79 0.47 0.47 0.63 0.47 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.47 0.79 0.47 0.47 0.47 0.47 0.63 0.47 0.63 0.63 0.63 0.63 0.63 0.55 0.55 0.55

16 16 12 20 12 12 16 12 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 12 20 12 12 12 12 16 12 16 16 16 16 16 14 14 14

1 4 1 4 5 1 5

4 1 4 4 1 1

Push Plate Wear Plates Right Center Right End Center/Push Left End Left Center Right End Center Left End

5-Piece Set

1JH, 6AH, 2WP, A5G, DZB, 9CH, 6AH

Qty.

Push Plates Push Plates Wear Plates Push Plate Wear Plates Wear Plates Push Plates Wear Plates Push Plate Right End Right Center Center/Push Left Center Left End Right End Right Center Center Left Center Left End Right End Center Left End Push Plate Wear Plates Push Plate Wear Plates Wear Plates

80V, 95S, 69E, 14J, 44K, 47K 29V, 30W, 68V, 60V 04Y1-1939

3-Piece Set

Thickness inches mm

Location

6

RECOMMENDED WEAR BARS Blade Model 8N, SU 8N, U

Dimensions Left Wing inches mm

Right Wing inches mm 14.1 50.4

358 1280

14.1 50.4

358 1280

Wear Bars Center inches mm

Length feet

mm

Qty.

Part No.

119.6 67.7

12 15

3658 4572

2* 2*

107-3389 107-3391

3037 1720

* Provides 2 wear bar coverage full width of blade.

DOZER HEAVY DUTY MINING GET HD Edge Blade Model

Blade Ser. Number

Part Number

inches

8L, 8U

06Y1396-UP, 42Z, 82M

(1) 113-0323 a

2.36

HD End Bit

Hardware

mm

Part Number

inches

mm

Qty.

Bolts

Nuts

60

113-0343 b*

4.72

120

32

4J-9508

2J-3507 c

HD — Heavy Duty * Combination end bit and wing edge; double thickness, 2/3 of length.

a Edge bolt quantity is 14. b End bit bolt quantity is 18.

c Also use 5P-8250 washers.

SIDEBAR PROTECTOR Blade Model

Sidebar Protector

Qty.

Pin

Qty.

Retainer

Qty.

Adapter Plate

Qty.

D9, D8

9J-9600

2

135-9350

4

8E-6359

4

152-0027

2 2-17

Bulldozers / Compactors D7 BULLDOZERS

CUTTING EDGES Blade Model

Blade Ser. Number

7A

06A, 17C5001-UP, 35D, 84D, 6E, 18E 13F, 22F, 30F, 72F, 13H 4EB, 3CC, 4ZC

7S

05A, 17C1-5000, 84C, 34D, 83D, 02E, 17E 23F, 31F, 59F, 14H

53J, 49K, 60K, 64K, S7G

6KB, 8ZB, 4XC, 8NH, J8L, CDC 7U

42G

85D, 61K, 94R

5SB, 9JB, 7AC, 8MH, JIL, CDL

7S-LGP

6JB, 3GH, 4FG, 4XH, 5GH 2RP, 8RH, 5SP, 9KP, J4L, CDN

7SU

4DB, 2FC, 2JH, 1JP, 8LH, CDT J6L, BHT

C — Center Edge E — End Edge * Edges are 11" (280 mm) wide. a Uses 5P-8248 washers. b Uses 5P-8249 washers.

2-18

Type

Thickness inches mm

Qty.

Part

Qty.

Hardware Bolts

Nuts

15

5J-4771

2J-3506

7

5J-4771 a

2J-3506

7

6F-0196 b

2J-3505

23

5J-4771

2J-3506

7 5 7 5 7 5 7 5 7 5 6

5J-4773

2J-3506

5J-4772 b

2J-3505

6F-0196 b

2J-3505

5J-4773

2J-3506

5J-4772 b

2J-3505

6F-0196 b

2J-3505

6F-0196

2J-3505

6F-0196

2J-3505

FD FD FD GD GD FD GD EWL FD GD

0.75 1.00 0.75 1.00 1.00 0.75 1.00 1.38 0.75 1.00

19 25 19 25 25 19 25 35 19 25

2 2 3 3 3 3 3 3 1 1

4T-2949 4T-2863 4T-2948 4T-2989 9W-9796* 4T-3901 7T-6589* 135-9778* 4T-2954 4T-2864

FD

0.75

19

GD

1.00

25

FD

0.75

19

GD

1.00

25

GD

1.00

25

FD GD EWL FD

0.75 1.00 1.38 0.75

19 25 35 19

GD

1.00

25

FD

0.75

19

GD

1.00

25

GD

1.00

25

FD

0.75

19

GD

1.00

25

EWL

1.38

35

FD GD EWL FD GD EWL FD

0.75 1.00 1.38 0.75 1.00 1.38 0.75

19 25 35 19 25 35 19

GD

1.00

25

EWL

1.38

35

1 2 1 2 1 2 1 2 1 2 3 3 3 1 2 1 2 1 2 1 2 1 2 2 2 2 2 2 2 3 3 3 3 3 3 1 2 1 2 1 2

4T-2946–C 4T-2945–E 4T-2990–C 4T-2991–E 4T-2921–C 4T-2922–E 4T-2993–C 4T-2992–E 9W-9794–C* 9W-9795–E* 4T-5318 7T-6678* 107-3363 4T-2955–C 4T-2952–E 4T-2890–C 4T-2985–E 4T-2917–C 4T-2916–E 4T-3421–C 4T-3420–E 9W-9793–C* 9W-9792–E* 4T-7110–C 4T-7109–E 7T-6591–C* 7T-6592–E* 135-9627–C* 135-9626–E* 4T-3901 7T-6589* 135-9778* 128-5883 135-6537* 145-7846 4T-5318–C 1U-1192–E 7T-6678–C* 7T-6936–E* 107-3363–C 107-3362–E

FD — Finish Dozing

GD — General Duty

9 5 9 5 9 5 9 5 9 5 6 4 6 4 6 4 7

6 6 6 6 6 6

Bulldozers / Compactors D7 BULLDOZERS

END BITS Blade Model 7A

7S

7U

7S-LGP 7SU

Blade Ser. Number 06A, 35D, 84D, 06E, 18E, 17C5001-UP 22F, 30F, 72F, 13F, 13H, 4EB, 3CC, 4ZC 05A, 84C, 34D, 83D, 02E, 17E, 17C1-5000 8ZB, 23F, 31F, 59F, 60K, 14H, 49K, 64K, 4XC, 53J, 6KB, 8NH, CDC, J8L, S7G 9JB, 42G, 85D, 61K, 7AC, 94R, 5SB, 8MH, J1L, CDL 9KP, 6JB, 2RP, 8RH, 5SP, CDN, J4L 2FC, 4DB, 1JP, 8LH, 2JH, BHT, J6L, CDT

GD* Thickness Finish (R-L) inches mm (R-L) 3J-2465/6 1.12 28 4T-6667/8 3G-8293/4 3G-8315/6 4J-8843/4 9W-6199/8

0.88 1.00 1.12 1.38

22 25 28 35

4T-6505/6

Utility Thickness Hardware (R-L) inches mm Qty. Bolts Nuts 3 a 1J-6761 2J-3506 4 a 5J-4771 105-0575/4 1.38 35 105-0577/6 1.75 45

4T-6671/2 3G-8293/4 3G-8315/6 4J-8843/4 9W-6199/8 3G-8293/4 3G-8315/6 9W-6199/8 4J-8843/4 9W-6199/8 9W-6199/8

0.88 1.00 1.12 1.38 0.88 1.00 1.38 1.12 1.38 1.38

22 25 28 35 22 25 35 28 35 35

7a

5J-2409

2J-3505

7a

5J-4771

2J-3506

4T-6505/6

105-0575/4 1.38 35 105-0577/6 1.75 45

7a

6F-0196

2J-3505

4T-6505/6

105-0575/4 1.38 35 105-0577/6 1.75 45

7a

6F-0196

2J-3505

* Part numbers that begin with: 3G = Hot cupped, Abrasion. 3J, 4J = Impact. a Quantity per end bit.

WEAR PLATES Blade Model 7A 7S

7SU

7U 7S-LGP

Blade Ser. Number 6A, 17C, 5001-UP, 35D, 84D, 6E, 18E, 13F, 22F, 30F, 72F, 13H, 4EB, 3CC 23F, 31F, 59F, 14H, 58J, 49K, 60K, 64K, 05A, 1701-5000, 84C, 340, 83D, 02E, 6KB, 8NH, 8ZB, 4XC 4DB, 1JP, 8L11, CDT “All” CDT

85D, 42G, 61K, 94R, 5SB, 8MH, 9JB, 7AC 6JB, 2RP, BRH, 3GH, 4XH, 5GH, 5SP, 9K9

Location

Qty.

Part

Thickness inches mm

Wear Plates

3

3J-3141

0.31

8

Wear Plates Push Plate

3

3J-3142 4J-3699

0.31 0.63

8 16

4J-3699 3J-3142 4Z-9148 4Z-9151 4Z-9150 3J-3142 4J-3699 2J-8523

0.63 0.31 0.50

16 8 12

0.31 0.63 0.50

8 16 12

Push Plate Wear Plates Right End Center Left End Wear Plates Push Plate Wear Plates

4 1 1 1 4 5

2-19

Bulldozers / Compactors D6 BULLDOZERS

CUTTING EDGES Blade Model 6A

6A Custom Wide 6P 6PXL 6P-LGP

6P-LGP Foldable 6S

Blade Ser. Number 16C5001-UP, 37D, 81D, 16E, 03F, 04F, 40H 15C5001-UP, 39D, 82D, 08E, 09E 54U, 44E, 47G, 58G, 18H 1BH1-0569, 4DH, 4LH, 3EH 1BH0570-UP 1XP, 3GP, 1ZP, 1YP 3PP, 4BP, 8TP 6HP 3WP, 3XP B6X, G6M, G6N 4MP, B6L, G6G 4TP, 4WP G6M F6W, F6Y 09A, 01C, 06C, 15C1-5000 16C1-5000 85C, 36D, 80D, 38D, 15E, 02G, 03G, 39H 95E, 17H, 46G, 55G, 63S 21H, 41H 1DH1-0599, 2HH, 3JH, 4BH

1RP, 3EP, 1DH600-UP, CLH, 3EP, BHN 6S-LGP 1AH, 2LH, 3FH, 1SP, 3HP, BHG 6SU 1CH, 2NH, 4PH 8AH, 8BH 2SP, 6GP, ECA, SGD 1TP, 3FP, 1WP, 3RP, 4AP, 8SP, BHM 6SU Custom Wide 1WP**, 9BP**

Type

Thickness inches mm

Part

Qty.

Bolts 3F-5108

4K-0367

FD

0.75

19

1 2

4T-3008–C 4T-3020–E

11 9

FD

0.62 0.75

16 19

1 2

4T-2978 4T-3030

24 12

FD

0.75

19

2

4T-3009

10

4F-7827

2J-3506

5P-8248

FD EWL FD EWL FD

0.75 1.00 0.75 1.00 0.75

19 25 19 25 19

3 3 4 4 4

4T-6262 7T-9977 4T-2952 4T-2985 4T-2952

7

5J-4773

2J-3506

5P-8248

5J-4773

2J-3506

5P-8248

EWL FD FD FD FD FD FD FD FD FD FD FD

1.00 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.62 0.75 0.62 0.75

25 19 19 19 19 19 19 19 16 19 16 19

4 4 2 2 2 2 2 2 1 1 1 1

4T-2985 109-9093 3G-4282 3G-4282 4T-2315 127-3050 3G-4282 177-4550 4T-2977 4T-3021 4T-2976 4T-3023

5 6 7 7 10 10 7 9 18 18 22 22

5J-4773 5J-4773 5J-4773 5J-4773

2J-3506 2J-3506 2J-3506 2J-3506

5P-8248 5P-8248 5P-8248 5P-8248

5J-4773 3F-5108

2J-3508 4K-0367

5P-8248

FD

0.75

19

5P-8248

19

FD

0.75

19

5J-4773

2J-3506

5P-8248

EWL

1.00

25

FD EWL

0.75 1.00

19 25

1 2 3 3

7 4 11 4 7 4 7 4 5

2J-3506

0.75

*4T-3013–C* *4T-3010–E* 4T-3011–C 4T-3010–E 4T-6659–C 4T-3010–E 7T-9976–C 7T-9978–E 4T-2952 4T-2985

4F-7827

FD

1 2 1 2 1

5J-4773

2J-3506

5P-8248

FD EWL FD EWL FD

0.75 1.00 0.75 1.00 0.75

19 25 19 25 19

5J-4773

2J-3506

5P-8248

8

5J-4773

2J-3506

5P-8248

2J-3506

5P-8248

19 25

4 7 8 8

5J-4773

0.75 1.00

4T-6659 7T-9976 9W-1878 6Y-3840 9U-8057–E 4T-6659–C 9W-1878 6Y-3840

7

FD EWL

3 3 2 2 2 1 2 2

5J-4773

2J-3506

5P-8248

FD EWL

0.75 1.00

19 25

2 2

106-0956 229-6599

9

5J-4773

2J-3506

5P-8248

C — Center Edge E — End Edge FD — Finish Dozing EWL — Extended Wear Life * Optional one-piece edge 4T-3017 can be used to replace (1) 4T-3013 and (2) 4T-3010. ** Identified by part #4Z-9230 or 143-0499 on the blade assembly plate. NOTE: Cutting edges for the SLGP blades are 8" wide. Cutting edges for all other blades are 10" wide.

2-20

Hardware Nuts Washers

Qty.

5 5

P — Variable Pitch Power Angle Tilt

Bulldozers / Compactors D6 BULLDOZERS

END BITS GD* Blade Model 6A

6A Custom Wide 6P 6PXL 6P-LGP 6P-LGP Foldable 6S

6S-LGP 6SU & Custom Wide SU

* ** # a b

Blade Ser. Number 37D, 39D, 81D, 82D, 08E, 09E, 16E, 03F, 04F, 40H, 15C5001-UP, 16C5001-UP 44E, 47G, 58G, 18H, 54U 3EH, 1BH1-569, 4DH, 4LH 1BH570-UP, 1XP, 3GP, 1ZP, 3PP, 4BP, 8TP, 1YP 6HP 3WP, 3XP B6X, G6M, G6N 4MP, 4TP, 4WP, B6L, G6G, G6M F6W, F6Y

EWL (R-L)

4J-8261/2 3G-8297/8 9W-9011/10

Thickness inches mm 0.88 22 0.88 22

0.75 0.88 1.00

19 22 25

4T-4455/4

Finish (R-L) 4T-3049/50

Utility

Qty. a 6

Hardware Bolts Nuts 3F-5108 4K-0367

4T-3041/2

6

4F-7827

4T-4435/6

6

**5J-4773**

2J-3506

9W-1875/6

6Y-4411/10

1.18

30

9W-8874/5 122-8617/18

6

**5J-4773** 2J-3506

9W-1875/6

6Y-4411/10

1.18

30

9W-8874/5 122-8617/18

6

**5J-4773** 2J-3506

4T-5407/8 4T-5407/8 4T-5407/8

140-6787/8# 0.88 140-6787/8# 0.88 140-6787/8# 0.88

22 22 22

8E-9379/78 b 8E-9379/78 b 8E-9379/78 b

4 4 4

**5J-4773** 2J-3506 **5J-4773** 2J-3506 **5J-4773** 2J-3506

0.75

19

177-4551/2

4

5J-4773** 2J-3506

9F-7073/4 3G-8321/2

0.88 0.88

22 22

4T-3051/2

3 3

3F-5108 4F-0391

4K-0367

5J-1419/20 3G-8319/20 9W-9015/14

0.88 0.88 1.00

22 22 25

4T-3045/6

6

4F-7827

2J-3506

4T-4435/6

6

**5J-4773** 2J-3506

9W-8874/5 122-8617/18

6

**5J-4773** 2J-3506

4T-4435/6

6

**5J-4773** 2J-3506

9W-8874/5 122-8617/18

6

**5J-4773** 2J-3506

8E-9379/78

4

5J-4773** 2J-3506

9W-8874/5 122-8617/18

6

5J-4773** 2J-3506

09A, 01C, 06C, 15C1-5000, 16C1-5000, 85C, 36D, 38D, 80D, 15E, 02G, 03G, 39H 95E, 46G, 55G, 17H, 21H, 63S 4BH, 1DH1-599, 2HH, 3JH, 1AH 1DH600-UP, 1RP, 3EP, CLH, BHN 1AH, 2LH, 3FH, 1SP, 3HP, BHG 8AH, 1CH, 2NH, 4PH, 8BH 2SP, 6GP, ECA, S6D 1TP, 3FP, 1WP, 3RP, 4AP, 8SP, 9BP, BHM

(R-L) 9F-7075/6 3G-8295/6

4T-4455/4 9W-1875/6

6Y-4411/10

1.18

30

4T-4455/4 9W-1875/6

6Y-4411/10

1.18

30

4T-5407/8 9W-1875/6

6Y-4411/10

1.18

30

Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 6Y = Impact. Uses 5P-8248 washers. Hot cupped end bits. Quantity per end bit. Has angled outer corners. May substitute (2) 3G-4285 with straight outer corner.

NOTE: End bits for the 6S-LGP dozer are designed to match with 8" wide cutting blades. End bits for all other dozers are matched with 10" wide edges.

2-21

Bulldozers / Compactors D6 BULLDOZERS

WEAR PLATES Blade Model 6A

6S

6S LGP 6SU

6P 6P-LGP

Blade Ser. Number 01C, 06C, 15C, 37D, 16C5001-UP, 39D, 81D, 82D, 08E, 09E, 16E, 03F, 04F, 40H 44E, 18H, 47G, 54U 3PP, 4BP, 1XP, 3GP, 8TP, 1YP, 1BH 09A, 16C1-5000, 85C, 80D, 15E, 02G, 03G, 39H 95E 1RP, 3EP 1DH, 2HH, 30H, 50H 1AH, 2LH, 3FH, 1SP, 3HP, 55H 21H 3FP, 1TP, 8SP, 4AP, 1CH, 2NH, 1WP, 3RP, 9BP 1CH, 2NH, 3TH, 4JH, 4PH 2SP, ECA, S6D, JCE, S6S

3WP, 3XP, B6X, G6N 4MP, B6L

* One plate requires modification. ♦ Fit Up — Close. ♦♦ Fit Up — OK.

2-22

Location Wear Plates

Qty. 5

Part 1J-3106

Thickness inches mm 0.38 10

Wear Plates Wear Plates

6 8

3J-3740 1J-3108

0.38 0.31

10 8

Wear Plates

5

1J-3108

0.38

10

Wear Plates Wear Plates Wear Plates Wear Plates Wear Plates Wear Plates

5 3 4 4 7 4

2J-8526* 3J-3142 2J-8526 3J-3380 1J-3108 9J-1659

0.38 0.31 0.38 0.50 0.38 0.50

10 8 10 12♦ 10 12♦♦

Wear Plates Wear Plate — Center Wear Plate — RH Wear Plate — LH Wear Plates Wear Plates

4 3 1 1 3 4

2J-8526 9J-1659 9W-2757 9W-2760 3J-3142 3J-3142

0.38 0.50 0.55 0.55 0.31 0.31

10 12 14 14 8 8

Bulldozers / Compactors D5 BULLDOZERS

CUTTING EDGES Blade Model

Blade Ser. Number

5A

91H, 96H, 42K

5S

5S Pet♦ 5S-LGP 5P

5PXL

5SU

Thickness inches mm

93H1-3846 98H, 11J, 13J 93H3847-UP 3AH, 2FH, 2TH

FD FD FD

0.62 0.75 0.75

16 19 19

FD FD

0.75 0.75

19 19

6RH 90H

FD FD

0.75 0.62

19 16

FD

0.75

19

FD

0.75

19

FD FD FD FD FD FD FD FD FD FD FD FD FD FD FD FD FD FD

0.75 0.75 0.75 0.75 0.62 0.75 0.62 0.75 0.62 0.62 0.75 0.62 0.62 0.62 0.75 0.62 0.62 0.75

19 19 19 19 16 19 16 22 16 16 22 16 16 16 19 16 16 19

92H, 97H, 10J, 12J 16K, 19R 2BH, 4FH 4AH 1ZH, 3KH 9WH, 6MH 2AH, 2MH, 7AH 4GP, 6JP 8GP HGP W5C

5PXW 5P-LGP

Type

6PH, 9XH, 8NP 2SH, 1YH 4FP, BHY 8ZP 7BH

C — Center Edge E — End Edge a Uses 5P-8248 washers. b Uses 5P-8247 washers. ♦ Petroleum field blade.

Qty.

Part

Qty.

1 2 1 2 2 1 2 2 1 2 1 2 1 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2

4T-2978 4T-3030 4T-3008–C 4T-3020–E 4T-3004 4T-3013 1U-2207 102-4580 4T-2983–C 4T-2972–E 4T-3027–C 4T-3028–E 4T-3025–C 4T-3026–E 4T-3024 3G-6062 4T-0731 1U-2211 3G-9306 3G-4282 8E-9377 4T-6659 140-0983 8E-9377 4T-6659 5Q-8193 157-7338 6Y-5842 4T-2315 4T-8940 142-4914 4T-6659 9U-8057

24 12 11 9 9 7 6 8 3 4 3 4 7 4 28 7 5 9 6 7 7 7 6 7 7 6 7 8 10 8 8 7 4

Hardware Bolts

Nuts

3F-5108

4K-0367

4F-7827 5J-4773 a

2J-3506

4F-7827 3F-5108

2J-3506 4K-0367

5J-4773 a 5J-4773 a 5J-4773 a 5J-4771 a 5J-4773 a 5J-4773 a 5J-4773 a 5J-4771 a 5J-4773 a

2J-3506 2J-3506 2J-3506 2J-3506 2J-3506 2J-3506 2J-3506 2J-3506 2J-3506

5J-4773 a 2J-3506 3F-5108 b 4K-0367 3F-5108 b 4K-0367 5J-4773 a 2J-3506 5J-4773 a 2J-3506 3F-5108 a 4K-0367 5J-4773 a 2J-3506

FD — Finish Dozing

2-23

Bulldozers / Compactors D5 BULLDOZERS

END BITS GD* Blade Model 5A

5S

5S-Pet♦ 5S-LGP 5P 5PXL 5PXW 5P-LGP 5SU * ** a b c ♦ #

Blade Ser. Number

(R-L)

Thickness inches mm

9F-7075/6 3G-8295/6

0.75 19 0.88 22

4T-3049/50 6 c

3F-5108

4K-0367

4J-8261/2 3G-8297/8 8E-9901/00 140-6787/8# 9F-7073/4 3G-8321/2

0.75 0.88 1.00 0.88 0.75 0.88

4T-3041/2

4F-7827

2J-3506

8E-9379/8** 4 c 4T-3051/2 6 c

5J-4773 a 3F-5108 b

4K-0367

4T-5407/8 4T-5407/8 4T-5407/8

140-6787/8# 140-6787/8# 140-6787/8#

0.88 22 0.88 22 0.88 22

5J-4773 a 5J-4773 a

2J-3506 2J-3506

140-6787/8# 140-6787/8#

0.88 22 0.88 22

4T-5407/8 4T-5407/8

140-6787/8# 140-6787/8#

0.88 22 0.88 22

5J-4771 a 5J-4773 a 5J-4773 a 3F-5108 b 3F-5108 b 5J-4773 a 5J-4773 a

2J-3506

4T-5407/8 4T-5407/8

8E-9379/8** 4 c 8E-9379/8** 4 c 8E-9379/8** 8E-7078/9 4 c 8E-9379/8** 4 c 8E-9379/8** 4 c 6Y-5839/40 3 c 6Y-5839/40 3 c 8E-9379/8** 4 c 8E-9379/8 4 c

EWL (R-L)

91H, 96H, 42K, 11J, 13J, 98H, 93H1-3846, 93H3847-UP, 6RH 3AH, 2FH, 2TH 90H, 92H, 97H, 10J, 12J, 16K, 19R 2BH, 4FH 4AH 1ZH, 3KH 6MH, 9WH, 8GP 6JP, 2AH, 2MH, 7AH HGP, W5C 6PH, 9XH, 8NP, 8ZP 1YH, 2SH, BHY 7BH

4T-5407/8

19 22 25 22 19 22

Finish (R-L)

Qty.

6c

Hardware Bolts

Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 9F = Impact. Has angled outer corner. May substitute (2) 3G-4285 with straight outer corner. Uses 5P-8248 washers. Uses 5P-8247 washers. Quantity per end bit. Petroleum Field blade. Hot cupped end bits.

WEAR PLATES Blade Model 5A 5S

5P

5P-LGP

2-24

Blade Ser. Number 91H, 96H, 42K 93H, 98H, 11J, 13J 90H 92H, 97H, 10J, 12J, 19R 2BH 2AH, 4GP, 6JP 9WH W5C, 4GP, HGP BHY

Location Wear Plates

Wear Plates Wear Plates

Qty. 5 6 5 6 4 5 4 3 4

Part 1J-3106 1J-3106 1J-3108 1J-3108 2J-8526 3J-3740 3J-3740 2J-8526 1J-3106

Thickness inches mm 0.38 10

Nuts

2J-3506 4K-0367 4K-0367 2J-3506 2J-3506

Bulldozers / Compactors D4 BULLDOZERS

CUTTING EDGES Blade Model

Blade Ser. Number

4A

12D, 78D, 05F1-2850 05F, 97E, 24F, 65F 10D, 79D, 06F1-11299 52E, 96E, 26F, 06F11300-UP, 95G, 33R 6AC, 2GC 04A, 40D

4S

4P-LGP

4PXL

Qty.

Part

Qty.

Hardware Bolts

Nuts

4F-3654

4K-0367

2J-3506 4K-0367

0.62

16

1

4T-2977

18

FD

0.62

16

1

4T-2979

13

FD

0.62

16

1

4T-2981

23

FD

0.62

16

1 2

4T-2974–C 4T-2973–E

5 6

FD FD GD FD

0.62 0.62 0.75 0.62

16 16 19 16

5J-4773* 4F-3654

19

02A, 25F, 67F 93C

FD FD

0.62 0.62

16 16

2TC, 3CH, 3DC 4HC 84E, 19J, 45J

FD FD EWL

FD FD FD

0.62 0.62 0.77 0.77 0.62 0.62 0.62 0.62 0.62

16 16 19 19 16 16 16 16 16

3 4 3 4 15 7 4 6 8 4 7 4 7 6 6 6

4F-3654

0.75

4T-8940 4T-2977 4T-3021 4T-2983–C 4T-2972–E 4T-3027–C 4T-3028–E 4T-2980 8A-8580–C 8A-8581–E 4T-3720 4T-8940 4T-3028 4T-3029 4T-2972 4T-2982 6Y-5841 4T-6230 3G-9306

8 18

GD

2 1 1 1 2 1 2 1 1 2 2 2 2 1 2 1 2 2 2

3F-5108 a 4K-0367 3F-5108 a 4K-0367 5J-4773* 2J-3506

FD FD FD FD FD FD FD GD

0.62 0.62 0.62 0.62 0.62 0.62 0.62 0.77

16 16 16 16 16 16 16 19

2 2 2 2 2 2 2 2

104-9634 140-2187 4T-6232 4T-8940 6Y-5842 141-2238 8E-9377 4T-6659

6 6 8 8 8 8 7 7

3F-5108 a 3F-5108 a 3F-5108 a 5J-4773* 3F-5108 a 3F-5108 a 5J-4773* 5J-4773*

FD 4P

Thickness inches mm

FD

67E, 27F, 94G

4S-LGP

Type

6CH 2YH 9ZB, 4AC, 5NH, 7EH 9SH 8LP 4GH, 9YH, 8ZH 5EC, 5RH, 7CH 6DH, 9TH, 8MP 8YP 6XH

C — Center Edge * Uses 5P-8248 washers. a Uses 5P-8247 washers.

E — End Edge

FD — Finish Dozing

EWL — Extended Wear Life

4F-3654

5J-4773* 5J-4773* 4F-3654

2J-3506 2J-3506 4K-0367

4F-3654

4K-0367 4K-0367 4K-0367 2J-3506 4K-0367 4K-0367 2J-3506 2J-3506

GD — General Duty

2-25

Bulldozers / Compactors D4 BULLDOZERS

END BITS GD* Blade Model 4A

4S, 4S-LGP

4P, 4P-LGP

4PXL

Blade Ser. Number 10D, 12D, 78D, 79D, 52E, 96E, 97E, 05F, 06F, 24F, 26F, 65F, 95G, 33R 6AC, 2GC 02A, 04A, 93C, 40D, 67E, 84E, 25F, 27F, 67F, 94G, 19J, 45J 3DC, 2TC, 4HC, 3CH 6DH,4GH, 8LP, 9YH, 8ZH, 8MP, 6CH, 4AC, 2YH, 9TH, 9SH, 8YP 9ZB, 5EC, 7CH, 5RH, 5NH 6XH

EWL (R-L)

(R-L) 5A-4565/6

Thickness inches mm

Finish (R-L)

Qty.

Hardware Bolts

22

4T-3043/4

3c

3F-5108 a

4K-0367

4T-5407/8 140-6787/8** 9F-7073/4 3G-8321/2

0.88 0.75 0.88

22 19 22

8E-9379/8 b 4T-3051/2

4c 6c

5J-4773 a 3F-5108 a

2J-3506 4K-0367

4T-5407/8 140-6787/8**

0.88 22

8E-9379/8 b

4c

5J-4773 a

2J-3506

(2) 4T-6229 3c Straight Corner or 6Y-5839/40 a Angled Corner 8E-9379/8 b 4c

3F-5108 a

4K-0367

5J-4773 a

2J-3506

5J-4773 a

2J-3506

0.62 16

4T-5407/8 140-6787/8**

0.88 22

4T-5407/8 140-6787/8**

0.88 22

8E-9379/8 b

4c

* Part numbers that begin with: 3G = Hot cupped, Abrasion. 9F, 5A = Impact. ** Hot cupped end bits. a Uses 5P-8247 washers. b Has angled outer corner. May substitute (2) 3G-4285 with straight corner. c Quantity per end bit.

WEAR PLATES Blade Model 4A

4S 4P

2-26

Nuts

0.88

Blade Ser. Number 10D, 79D, 52E, 96E, 06F, 26F, 95G, 33R 12D, 78D, 97E, 05F, 24F, 65F 02A, 25F, 67F 67E 9ZB, 4GH, 9SH, 4AC, 5NH, 7EH, 6DH, 9TH, 6YH, 8LP

Location

Qty.

Part

Wear Plates

1

3J-3115

2

3J-3116

2 1 4

3J-3114 3J-3117 3J-3116

Thickness inches mm 0.31

8

Bulldozers / Compactors D3 BULLDOZERS

CUTTING EDGES Blade Model 3S

Blade Ser. Number

Qty.

Part

Qty.

FD FD FD

0.62 0.62 0.62

16 16 16

2 2 2

4T-6230 4T-6231 4T-6230

6 7 6

FD FD FD FD

0.62 0.62 0.62 0.62

16 16 16 16

Narrow PLGP

FD

0.62

16

2 2 2 2 1 2

4T-6232 6Y-5841 141-0413 4T-6230 4T-6231 157-7338

8 6 8 6 7 7

a Use 5P-8247 washers.

FD — Finish Dozing

3P

Super SLGP

6EH, 15W, 86U 31M, 40V 8SU, 1GP, 2JP, 9RH 96X, 5WH, 8JP 8HP, 8KP 8XP 5LH

Thickness inches mm

Type

Hardware Bolts

Nuts

3F-5108

4K-0367

3F-5108

4K-0367

3F-5108 4K-0367 a 3F-5108

4K-0367

END BITS Blade Model 3P 3S, 3S-LGP 3P-LGP

Blade Ser. Number

Thickness inches mm

Finish

8HP, 8KP, 2JP, 9RH, 85U, 6EH, 96X, 1GP, 5LH 15W, 31M, 40V, 86U, 6EH 5WH, 8XP

(2) 4T-6229 b or 6Y-5839/40 a

0.62

16

Qty.

Hardware Bolt

Nut

3c

3F-5108

4K-0367

a Have angled outer corner. b Straight corner. c Quantity per end bit.

WEAR PLATES Blade Model 3P-LGP

Blade Ser. Number 85U1-8375 85U8376-UP

Location Wear Plates or or

Qty.

Part

3 1 2 5

3J-3114 3J-3117 3J-3116 1J-3108

Thickness inches mm 0.31

8

2-27

Bulldozers / Compactors END BIT WEAR MATERIAL COMPARISON

END BIT WEAR MATERIAL COMPARISON This table compares the amount of available wear material for each end bit on the D8 through D11 ‘R’ Series TTT. These figures should be viewed only as appropriate indicators of wear life, as actual end bit life will vary by job application. CUTTING EDGES Wear Material Model

Type

Part Number (R-L)

lb

kg

D11R Carrydozer Endbits

ARM – Penetration (75 mm) Penetration (60 mm) EWL (75 mm) Standard (60 mm) EWL – Short (75 mm) Short End Bit (60 mm) Offset (60 mm) EWL GD Offset – Short (60 mm) Utility (75 mm) Utility (60 mm) EWL Abrasion/Impact Utility (75 mm) Utility (60 mm) GD Utility (45 mm) EWL GD Utility (60 mm) Utility (45 mm) Finish (45 mm) Utility (50 mm) EWL GD Finish (40 mm)

223-8127/8 273-7223/4 273-7230/1 273-7225/6 273-7232/3 273-7228/9 272-7225/6 8E-4545/6 8E-4543/4 273-7228/9 8E-9748/9 8E-9785/6 8E-4541/2 7T-4688/9 136-8755/4 100-3133/4 8E-4198/9 100-3131/2 8E-4539/40 8E-4196/7 100-3137/8 100-3135/6 6Y-4277/8 100-3139/40 8E-4537/8 8E-4193/4 6Y-4277/8

176.8 139.0 83.1 73.0 14.0 13.8 164.7 147.9 120.5 103.1 81.2 68.8 121.5 99.4 91.3 76.1 75.0 58.6 72.1 55.6 47.0 35.8 25.3 27.1 26.3 21.2 25.3

80.2* 63.0 37.7 33.1 6.4 6.3 74.7 67.1 54.7 46.8 36.8 31.2 55.1 45.1 41.4 34.5 34.0 26.6 32.7 25.2 21.3 16.2 11.5 12.3 11.9 9.6 11.5

D11R SU, U Endbits

D10R SU, U Endbits

D9R SU, U Endbits

D8R A, SU, U Endbits

* Steel weight only. Does not account for increased wear life of ARM.

2-28

Bulldozers / Compactors CUTTING EDGE SUPPORTS

CUTTING EDGE SUPPORTS FOR D6R THRU D11R BULLDOZER BLADES The cutting edge support is an integral part of the blade structure to which the cutting edges and end bits are bolted. These cutting edge support plates offer the same high quality materials and dimensional precision as the factory originals. Due to the critical nature of the bolted connection between the GET and dozer blade, a genuine Cat® cutting edge support will guarantee dimensional accuracy. Since some of these parts are MAO, made as ordered, check your parts system for availability. Description These cutting edge support plates are available for factory bulldozer blades on D6R thru D11R Track Type Tractors. The cutting edge support is an integral part of the blade structure that mounts the cutting edges and end bits. See the Illustration 1 (Part Identification) on next page for details. The cutting edge support consists of one piece for Straight, Angle, and Carrydozer blades. The Universal and Semi-U blades use a three-piece cutting edge support system that consists of one support in the center along with another support for the right and left hand sides. Cutting Edge Supports table on page 2-28 shows the required cutting edge support part numbers for the corresponding D6R thru D11R bulldozer blades. Features and Benefits The cutting edge support provides a structure to which the cutting edge and end bit are bolted. Prolonged operation with loose hardware can cause the bolts to elongate the mounting holes in the support. This makes it increasingly difficult to keep hardware tight. Repeatedly burning-off hardware also weakens the support around the bolt holes. If cutting edges and end bits are not replaced soon enough, severe wear and damage can occur to the cutting edge support. If a blade is suffering from any of these problems, a genuine Cat cutting edge support will ease the pain with its guaranteed dimensional accuracy. Installation Instructions Accurate positioning and welding of a new support is critical. The dimensions for the proper angle (
) and distance (X) from the center of the bolt hole in the cutting edge bolt hole to the lower edge of the moldboard are located in Illustration 2 (Critical Dimensions) below. For end supports, distance (X) is from the center of the bolt hole in the bottom row to the lower edge of the moldboard. Failure to adhere to these dimensions could result in improper fit up as well as poor GET performance. All gussets and structural supports that were removed must be replaced. Use E7018 welding rod or an equivalent for all welding.

Illustration 1 Part Identification

Illustration 2 Critical Dimensions

2-29

Bulldozers / Compactors CUTTING EDGE SUPPORTS

CUTTING EDGE SUPPORTS Blade Model

Blade Serial Number

D11CD D11R SU

5JP, BHZ 4BB, 4KB, 9NH, 1AP, 4XP, 8PP

D11R U

4CB, 5TB, 9MH, 9ZH, 4YP, 8RP

D10R SU

1RH, 7RH, 4KP, 6EP, BHJ, BHA

D10R U

1SH, 7WH, 4LP, 6FP, BHF, BHP

D9R SU

D8R U

1MH, 5BH, 1LP, 2LP, 7NH, 2ZP, 2BP, 9LH, 9RP, CLC, CLN, CLY, CMA 1LH, 2ZH, 1MP, 7PH, 9MP, CMH, CMN, CMS, CMW, CMZ 1KH, 2PP, 2TP, 3MP, 3WH, 1HP, 6LH, 9BH, 9PH, 2NP, 05A, 9TP, BHW 1JH, 2WP, 6AH, 9CH, 9WP, CXB

D8R A D7R S D7R SU

BHR, 9ZP 6KB, 8ZB, 4XC, 8NH, J8L, CDC 4DB, 2FC, 2JH, 1JP, 8LH, CDT, J6L, BHT

D7R A D7R U

4EB, 3CC, 4ZC 5SB, 9JB, 7AC, 8MH, J1L, CDL

D7R S LGP D6R S D6R S LGP D6R SU

2RP, 8RH, 5SP, 9KP, J4L, CDN 1RP, 1DH600-UP, CLH, 3EP, BHN 1AH, 2LH, 3FH, 1SP, 3HP, BHG 1TP, 3FP, 1WP, 3RP, 4AP, 8SP, BHM

D6R SU XW

1WP*, 9BP*

D6R A D6R A XW

1XP, 3GP, 1ZP, 1YP, 3PP, 4BP, 8TP 6HP

D9R U D8R SU

CD — Carrydozer Blade A — Angle Blade S — Straight Blade LGP — Tractor with LGP undercarriage XW — Tractor with XW undercarriage * Identified by part number 4Z-9230 or 143-0499 on the blade assembly plate.

2-30

CE Support

Location

Qty.

Angle (
)

135-2107 101-9540 101-9533 8E-6346 8E-6347 8E-3581 8E-7430 8E-5080 8E-6867 8E-5590 109-6347 8E-9228 8E-9227 6I-8403 7T-5936 6I-8402 7T-7831 147-3527 6Y-5701 6I-8380 3G-5352 4T-6337 6Y-5700 1U-1440 135-6536 8E-5199 1U-1947 8E-5205 6Y-1390 8E-5205 4Z-9239 6Y-1812 4Z-9435

all outside center outside center outside center outside center outside center outside center outside center outside center all all outside center all outside center all all all outside center outside center all all

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 1 1 2 1 1 2 1 1 1 1 2 1 2 1 1 1

35° 56° 56° 56° 56° 56° 56° 56° 56° 56° 56° 56° 56° 56° 56° 56° 56° 57° 55° 56° 56° 57° 55° 55° 55° 57° 57° 55° 55° 55° 55° 55° 55°

SU — Semi-U Blade

U — Universal Blade

Distance (X) inches mm 7.76 7.95 7.95 7.99 7.99 8.27 8.27 8.27 8.27 6.57 6.57 6.57 6.57 6.57 6.57 6.57 6.57 6.50 5.79 5.79 5.79 5.47 5.79 5.79 5.83 4.33 4.33 5.20 5.20 5.20 5.20 5.20 5.20

197 202 202 203 203 210 210 210 210 167 167 167 167 167 167 167 167 165 147 147 147 139 147 147 148 110 110 132 132 132 132 132 132

Bulldozers / Compactors 800 SERIES BULLDOZERS

CUTTING EDGES Thickness inches mm

Blade Model

Blade Type

Blade Ser. Number

854 (Tiger 790)

SU, GD

3WL, 3TL*

1.77

45

U-Coal, GD

3WL, 3TL*

1.77

45

SU, EWL

3WL, 3TL*

2.36

60

U-Coal, GD

3WL, 3TL*

1.38

35

U-Coal, EWL

3WL, 3TL*

1.57

40

SU, GD

3WL, 3TL*

1.77

45

SU, EWL

3WL, 3TL*

2.36

60

U-Coal, EWL

3WL, 3TL*

1.10

28

U-Coal, EWL

3WL, 3TL*

1.38

35

SU, GD

Australian

1.77

45

SU, EWL

3WL, 3TL*

SU, EEWL

Australian

Tiger 690

844 (Tiger 590)

836H

2.36

60

U

1.00

25

SU

1.00

25

SU

1.00 1.00 1.00

25 25 25

S

1.12

28.5

2.36

60

1.57 2.36 1.00

40 60 25

1.00

25

64G

1.00

25

93G

1.00

25

97X, 90K, 2GP 89X 4JP

1.00

25

1.00 1.00 1.00

25 25 25

S 836 834H 834G, 834H

None

U 835, 834 834 834C, 834B, 824C 834, 825, 824 826, 826C, 826G, 826H 825C 825G 825H

S U

F S

27K, 36G, 96G 14B

Qty.

Part

Qty.

Bolts

Hardware Nuts

Washers

4 2 3 2 4 2 2 2 2 2 2 2 3 2 3 2 2 2 1 2 1 2 3 2 2 2 1 3 2 2 2 1 3 2 3 3 3 2 1 2 1 2 3 3 2

9W-6658** 9W-6657** 7J-2966 135-9671 8E-2087** 8E-2086** 9W-4398 7T-9126 9W-6092 9W-3927 9W-4507 7J-2959 6Y-0018 9W-6657 6Y-0023 8E-2086 6Y-5540 4T-6386 4T-6378 7T-9125 9W-6092 9W-4500 9W-3928 9W-6657 9W-3927 112-2475 7J-2980 135-9625 8E-2086 4T-2986–I 4T-3422–E 4T-3423–C 4T-3420–C 4T-8797–E 4T-2889 4T-2889 4T-3420–C 4T-8797–E 6Y-5539–C 4T-6386–E 113-0322–C 195-7272–E 7J-2960 138-0791 4T-6515#

5 5 7 8 5 5 5 9 6 5 9 6 9 5 9 5 5 7 6 5 6 7 6 5 5 6 7 6 5 5 7 6 5 6 9 9 5 6 12 7 12 7 6

5P-8823

3K-9770

4K-0684

4J-9208

2J-3507

5P-8250

5P-8823

3K-9770

4K-0684

4J-9208

2J-3507

5P-8250

5P-8823

3K-9770

4K-0684

4J-9058

2J-3507

5P-8250

5P-8823

3K-9770

4K-0684

4J-9058

2J-3507

5P-8250

5P-8823

3K-9770

4K-0684

4J-9058

2J-3507

6F-0196

2J-3505

6F-0196 6F-0196 6F-0196

2J-3505 2J-3505 2J-3505

4F-4042

2J-3507

4F-4042

2J-3507

4F-4042

2J-3507

12

5J-2409

2 2 2

4T-8797–C a 4T-8798–E b 4T-2889

6 7 9

6F-0196

1 2 2

4T-6531–C 4T-6532–E 4T-6515

10 6 12

5J-2409

2J-3505

3 4 2 1

4T-6238 4T-6532 4T-2994–E 4T-6238–C

8 6 8

4F-4042 6F-0196 4F-4042

2J-3507 2J-3505 2J-3507

6F-0196 6F-0196

C — Center Edge E — End Edge I — Intermediate Edge * Balderson serial number. ** Australian built blades use a 6V-8360 bolt. # Optional 12" (305 mm) wide one piece edge 4T-6455 is available. a 135-6723 same as 4T-8797 with 1" (25 mm) bolt holes. b 135-6724 same as 4T-8798 with 1" (25 mm) bolt holes.

2-31

Bulldozers / Compactors 800 SERIES BULLDOZERS

CUTTING EDGES — Continued Blade Model 824C, 824G, 824H 824S 816, 816F

Blade Type S

Thickness inches mm 1.00 25 1.00 25

Blade Ser. Number 35G 2HP 88H 51K

815

814, 814F

S

41S, 15Z, 3ZP 24K1-1044, 59E1-341 24K1045-UP, 59E342-UP 39S, 17Z 56D, 23K

36S, 3YP C — Center Edge * Uses 5P-8249 washer.

1.13 1.00

29 25

0.75

19

0.75

19

0.75 0.75 0.75

19 19 19

1.00

25

0.75

19

Qty. 2 2 2 2 1 2 1 2 1 2 2 2 1 2 1 2 1 2

Bolts 5J-2409 6F-0196

Hardware Nuts 2J-3505 2J-3505

4J-9058 6F-0196

2J-3507 2J-3505

Part 4T-6514 4T-3420 122-9227 4T-6448 4T-6531–C 4T-6532–E 4T-2922–C 4T-2923–E 4T-3008–C 4T-3020–E 4T-3004 4T-3012 4T-2921–C 4T-2922–E 4T-2993–C 4T-2992–E 4T-2922–C 4T-2923–E

Qty. 10 5 6 10 10 6 5 7 11 9 9 10 7 5 7 5 5 7

Washers

Finish (R-L) 135-9672/3*** 100-3131/2

Qty. 5 7

100-3133/4

7

135-9698/9

4J-9208 5P-8823

2J3057 5P-8250 3K-9770 4K-0684

8E-4541/2 135-9669/70 100-3135/36

6 7 7 5 7

4J-9058 4J-9058

2J-3507 5P-8250 2J-3507 5P-8250

8E-4199/8 100-3137/8

7 7

5P-8823 4J-9058

3K-9770 4K-0684 2J-3507 5P-8250

8E-4541/2 4T-6505/6

7 7a

5P-8823 6F-0196

3K-9770 4K-0684 2J-3505

4T-6505/6

7a

6F-0196

2J-3505

7

4F-4042

2J-3507

7a

6F-0196

2J-3505

5J-2409 3F-5108

4K-0367

4F-7827 5J-4773 6F-0196

2J-3506 2J-3505

5J-2409*

E — End Edge

END BITS Blade Model 854 (Tiger 790)

Tiger 690 844 (Tiger 590)

Type U-Coal SU, GD

Blade Ser. Number 3WL**, 3TL** 3WL**, 3TL**

SU, EWL

3WL**, 3TL**

U-Coal, GD SU, GD SU, EWL U-Coal SU, GD

3WL**, 3TL** 3WL**, 3TL** 3WL**, 3TL** 3WL**, 3TL** 3WL**, 3TL**

SU, EWL

Australian 3WL**, 3TL** Australian

836H

U, SU, S

834H

SU

834G, 834H

S U

835, 834

27K, 14B, 36G 64G, 93G, 96G

826, 826C, 826G 825G

97X, 90K, 2GP, 93G 4JP

* ** *** a b

General Duty (GD)* Thickness (R-L) inches mm 1.57 40 1.77 45 8E-4198/9 2.17 55 2.36 60 8E-4541/2 2.76 70 1.38 35 8E-4199/8 2.17 55 2.76 70 1.10 28 1.77 45 8E-4196/7 1.97 50 2.17 55 2.36 60 8E-4539/40 2.56 65 2.76 70 3G-8293/4 0.88 22 4J-8843/4 1.12 28 3G-8315/6 1.12 28 3G-8293/4 0.88 22 4J-8843/4 1.12 28 3G-8315/6 1.12 28 1.57 40 2.36 60 151-7476/7 1.77 45 138-0792/3 2.36 60 3G-8293/4 0.88 22 4J-8843/4 1.12 28 3G-8315/6 1.12 28

Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 9J = Impact. Balderson serial number. End bit and edge. Quantity per end bit. 4.72 inch (120 mm) end bit assembly available, Part Number 113-0332/33.

2-32

6Y-4277/8 113-0334/36 b 4T-6505/6

Hardware Bolts Nuts Washers 4J-9208 2J-3507 5P-8250 5P-8823 3K-9770 4K-0684

Bulldozers / Compactors 800 SERIES BULLDOZERS

END BITS Blade Model 825C 825H

General Duty (GD)* Thickness (R-L) inches mm 3G-8317/8 1.18 30 3G-8287/8 1.12 28 9J-1477/8 1.12 28 3G-8293/4 0.88 22 4J-8843/4 1.12 28 3G-8315/6 1.12 28 5J-1279/80 1.25 32 3G-8289/90 1.38 35 3G-8281/2 1.57 40 3G-8293/4 0.88 22 4J-8843/4 1.12 28 3G-8315/6 1.12 28 4T-6241/2

Blade Ser. Number 89X

Type S

824S, 824G, 824H

35G, 64G, 93G 2HP 88H

816, 814S, 814F, 816F

56D, 51K, 23K 36S, 41S, 3YP, 3ZP 39S

815S, 815F

3G-8319/20 5J-1419/20 9F-7075/6 3G-8295/6 4J-8261/2 3G-8297/8

24K1-1044 59E1-341 24K1045-UP 59E342-UP

0.88 0.88 0.75 0.88 0.75 0.88

Finish (R-L) 4T-6239/40

Qty. 7a

4T-6505/6

7a

6F-0196

2J-3505

7a

4J-9208

2J-3507

7a

6F-0196

2J-3505

7a

5J-2409

4T-3045/6

6a

5J-4773

2J-3506

4T-3049/50

6a

3F-5108

4K-0367

4T-3041/2

6a

4F-7827

2J-3506

4T-6505/6

22 22 19 22 19 22

Hardware Bolts Nuts 4F-4042 2J-3507

Washers

* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 9J = Impact. a Quantity per end bit.

DOZER HEAVY DUTY MINING GET HD Edge* Blade Model

Blade Ser. Number

824S

35G

834G, 834H U-Blade 834G, 834H S-Blade 834B U-Blade 834B S-Blade 834 Balderson U-Blade 824 Balderson U-Blade

14B 36G, 96G

Part Number

HD End Bit**

Hardware

mm

Part Number

inches

mm

Qty.

Bolts

Nuts

(2) 109-9014 a## 2.36 107-3524 c*** (3) 138-0791 2.36

60

109-9024/25 b

4.72

120

5J-2409

2J-3505

60

2.36

60

4F-4042

2J-3507

(1) 113-0322 (2) 195-7272 (2) 123-3754 123-3755/56 d (2) 109-3146 e

2.36

60

2.36

60

40

4F-4042

2J-3507

2.36

60

2.36

60

40

6F-0196

2J-3505♦

2.36

60

2.36

60

38

6F-0196

2J-3505♦

(2) 128-5695 f-C

2.36

60

138-0792 i 138-0793 i 113-0334 113-0336 124-7284/5 or 128-2870/1 b† 124-7284/5 or 128-2870/1 b# 124-7284/5 or 128-2870/1 b#

34 28 32

2.36

60

28

6F-0196

2J-3505♦

(1) 128-5696 g-R (1) 128-5697 g-L 132-1043 h-LE

2.36

60

5

6F-0196

2J-3505♦

2.36

60

20

6F-0196

2J-3505♦

132-1041 g-LC 2.36 132-4730 g-RC 132-1042 h-RE 2.36

60

5

6F-0196

2J-3505♦

60

6

6F-0196

2J-3505♦

inches

124-7284/5 or 128-2870/1 b#

HD — Heavy Duty * Thick one-piece edge. ** Thick flush end bit. *** Thick one-piece edge and includes end bits. a Edge bolt quantity is 20. b End bit bolt quantity is 14. c Edge bolt quantity is 28. d Edge bolt quantity is 26. e Edge bolt quantity is 24. f Edge bolt quantity is 14. g Edge bolt quantity is 5. h Edge bolt quantity is 6. i Edge end and end bit combined. ♦ Also use 8C-6913 washers. † Use 128-2870/1 end bits for short side. # Edges have offset bolt holes; use 124-7284/5 for long side and 128-2870/1 for short side. ## 138-8799 is 1.77 inch (45 mm) thick.

2.36

60

Edge Location — C, R, L, LE, LC, RC, RE

2-33

Bulldozers / Compactors 800 SERIES BULLDOZERS

WEAR PLATES Blade Model

Blade Ser. Number

Part

Thickness inches mm

3J-3141 151-7527

0.31 0.47

8 12

RH

151-7528

0.47

12

LH

151-7529

0.47

12

Location

Qty.

Wear Plate Center

1

835 834G, 834H U-Blade 834G, 834H U-Blade 834G, 834H U-Blade 834C 834C 826 825 824C 824C, 824G, 824H 824F 824

27K

96G 64G 97X, 90K 89X, 93G 64G 2HP, 35G 93G 88H

Wear Plate Push Plate Wear Plate

1 1 1

3J-3142 4J-5622 3J-3141

0.31 0.79 0.31

8 20 8

Push Plate Push Plate Wear Plate Wear Plate

20 20 8 12

41S, 51K

Wear Plate

4J-5622 5J-2663 3J-3141 2J-8523 6J-0164 3J-3141

0.79 0.79 0.31 0.47

816

1 1 1 4 2 1

0.31

8

SOLE PLATES Blade Model

Blade Type

854 (Tiger 790)

GD SU, EWL U, GD SU, EWL

Tiger 690 SU, EWL/GD 844 SU, GD (Tiger 590) SU/U, EWL/GD SU, EWL 834H 834G 834

U S S, U U S

834, 824 824G 824H 824

C S S S

814

S

Blade Ser. Number Australian

1.77

45

3WL, 3TL** 3WL, 3TL** Australian

1.97 1.97 2.36

50 50 60

3WL, 3TL** Australian

1.97 1.77

50 45

3WL, 3TL** Australian

1.97 2.36

50 60

14B 36G, 96G

1.77 1.77 1.77 1.00 1.00

45 45 45 25.4 25.4

64G 2HP

1.00 1.00

25.4 25.4

35G1-222 35G 223-UP 36S, 3YP 23K, 56D

1.00 1.00 0.75 0.75

25.4 25.4 19 19

* Per plate. ** Balderson serial number. *** Australian built edges use a 6V-8360 bolt.

2-34

Thickness inches mm

Qty. 4 2 4 5 4 2 3 3 2 3 3 2 2 2 2 2 2 1 2 3 3 3 3 2 2

Part 9W-6658*** 9W-6657*** 135-9668 135-9668 8E-2087*** 8E-2086*** 135-9668 9W-3928 9W-6657 135-9668 135-9625 8E-2086 185-6509 100-6356 100-6356 4T-8799 4T-6650 4T-6651 4T-6645 4T-8799 4T-8799 7T-3491 7T-3492 4T-3018 4T-3019

Qty.* Bolts 5 7 7 5 5 7 6 5 7 6 5 7 4 4 7 8 9 6 7 7 7 7 4 5

Hardware Nuts

6V-8360 6V-8360 3R-2299 3R-2299 6V-8360 6V-8360 3R-2299 6V-8360 6V-8360 3R-2299 6V-8360 6V-8360 6F-0196 1J-5607 1J-5607 6F-0196 5J-4772 5J-4772 5J-4772 5J-4772 6F-0196 5J-4773 6V-0196 6V-0196 6V-0196

3K-9770 3K-9770 3K-9770 3K-9770 3K-9770 3K-9770 3K-9770 3K-9770 3K-9770 3K-9770 3K-9770 3K-9770 2J-3505 2J-3507 2J-3507 2J-3505 2J-3505 2J-3505 2J-3505 2J-3505 2J-3505 2J-3506 2J-3505 2J-3505 2J-3505

Washers 4K-0684 4K-0684 4K-0684 4K-0684 4K-0684

5P-8249 5P-8250 5P-8250

5P-8249

6RN AXB

36H 1GN 17Z 91P BKL

824G 815F 815B 815 815G

44N1-332 44N33-UP 43E 43N 86X

Tractor Serial Number

825G

834 825B 825C

835

Machine Model

N/A N/A N/A N/A 128-8104

235-5305

N/A N/A N/A N/A N/A N/A N/A N/A 128-8120 136-6323

Wheel Part Number Soil/Rock Soil Soil/Rock Soil/Rock Soil Soil Rock Soil/Rock Soil Soil High Density Rock High Density Soil/Rock Soil Soil Rock Soil

Tip Type N/A N/A N/A N/A N/A N/A N/A N/A 8V-0921 (65) 136-7016 (65) 4V-0525 N/A N/A N/A N/A (60) 7V-9372

Tip Assembly Number

7K-2939 2V-7053 8K-9189 4V-3851 2V-7053

2V-6628

7K-2939 8K-9171 7K-2939 7K-2939 8K-9171 2V-6628 4V-0668 7K-2939 2V-6628 2V-7053

Tip Part Number

9S-1645 7K-6908 7K-6909 4K-6910 7K-6908

7K7072

9S-1645 7K-7071 9S-1645 9S-1645 7K-7071 7K-7072 7K-7072 9S-1645 7K-7072 7K-6908

Base

7K-9535

7K-9535

7K-9535 7K-9535

7K-9535

Pin

9S-1644

9S-1644

9S-1644 9S-1644

9S-1644

Spring

All compactor tip options are weld-on except as footnoted.

COMPACTOR FEET (EARTHMOVING)

5S-1522

5S-1522

5S-1522 5S-1522

5S-1522

Snap Ring Nut

Washer

(2) 8K-9163 (2) 7H-3607 (2) 5S-0581

(2) 0T-0856 (2) 6B-6682 (4) 5H-1504

(2) 0T-0856 (2) 6B-6682 (4) 5H-1504

Bolt

X X

X

X

X X

X X

Weld-on

Bulldozers / Compactors COMPACTORS

2-35

Bulldozers / Compactors COMPACTORS

CLEANER BARS (EARTHMOVING & LANDFILL) Machine Model 836 835 834 826C, 826B 826G 825B 825C 825G 824B, 824C, 824G 816B 816F 815 815B 815B 815F

Tractor Ser. Number 3RL 7F9 44N 43E 87X, 58U 7LN 43N 86X 6RN 36H, 85X, 45N 15Z 5FN 91P 17Z 17Z 1GN

Tamping Foot

Rock

Sheepsfoot

4S-7928 4S-7928

4S-7928 4S-7928

3S-3228 3S-3228 7I-3968 7I-3968

3S-3228 3S-3228** 3S-3228** 3S-3228

3S-3228 3G-8250* 3G-8250* 3S-3228

4S-7928

4S-7928 7I-3968 7I-3968

4S-7928 106-2047 141-7407 141-7407

* Replaceable Tip — use 8E-6258 Pin and 8E-6259 Retainer. ** Optional one-way cleaner bars available: front wheel — 9V-5074; rear wheel — 9V-5073.

2-36

Landfill 7I-3968

3G-8250

20 20 20 20 20 20 20 20 20 20

40 40 40 40 40 40 40 40 40 40 40 40

(4) 211-4757

(4) 204-9376

(2) 128-8109 Right Front/ Left Rear (2) 128-8110 Left Front/ Right Rear (2) 184-1105 Right Front/ Left Rear (2) 184-1106 Left Front/ Right Rear (2) 4E-3524 Right Front Left Rear (2) 4E-3523 Left Front/ Right Rear (2) 170-8632 Left Hand (2) 170-8634 Right Hand 133-5341 216-9603

20

20

20

40

(4) 194-7022

20 20 20

40 40 40

(4) 128-8107 (4) 136-0456 (4) 165-4965

Wheel Part Number

Rim Width/ (Thickness) inches mm

none none

Traction

Traction

Chopper

Chopper

Chopper

Chopper

Chopper

Chopper

Channeled Plus

Channeled Plus

Channeled Plus

Channeled Plus Channeled Plus Channeled Plus

Tip Type

none (smooth rim) none (smooth rim)

(40) 107-3487 (RH)

(10) 2V-6401 Support (10) 2V-6400 Support (20) 6Y-6766 Blade (ARM) (10) 2V-6401 Support (10) 2V-6400 Support (20) 6Y-6766 Blade (ARM) (10) 2V-6401 Support (10) 2V-6400 Support (20) 6Y-6766 Blade (ARM) (10) 2V-6401 Support (10) 2V-6400 Support (20) 6Y-6766 Blade (ARM) (10) 2V-6401 Support (10) 2V-6400 Support (20) 6Y-6766 Blade (ARM) (10) 2V-6401 Support (10) 2V-6400 Support (20) 6Y-6766 Blade (ARM) (40) 107-3488 (LH)

(20) 232-0160

(20) 232-0160

(20) 232-0160

(20) 232-0160 (20) 232-0160 (20) 232-0160

Tip Part Number

816

165-4966

165-4966

165-4966

165-4966

165-4966

193-7133

165-4966

Ext. Rim

X

X

Hard Facing

(4) 194-3406 (4) 194-3407

(4) 194-3406 (4) 194-3407

(4) 194-3406 (4) 194-3407

(4) 194-3406 (4) 194-3407 (4) 194-3406 (4) 194-3407 (4) 194-3406 (4) 194-3407 (4) 194-3406 (4) 194-3407

Wear Bars

X

X

X

For use with Cleaner Fingers

X

Axle Guard

4E-9877 4E-9877

4E-9877

4E-9877

4E-9877

4E-9877

4E-9877

4E-9877

4E-9877

4E-9877

4E-9877

4E-9877

4E-9877

4E-9877 4E-9877 4E-9877

Sidewalls (inner and outer)

Bulldozers / Compactors COMPACTORS

2-37

2-38 25 25 25 25 25 25 25 25 25

25 25 25 25 25 25

48 48 48 48 48 48 48 48 48 40 40 40 40 40 40 40 40 40 40

169-6570

203-6102

135-9890 242-1899

186-2490 Left Hand 186-2491 Right Hand 170-7672 Left Hand 170-7673 Right Hand 135-9451 170-2459

25 25

25

25

25

48

(2) 170-1582 Right Front Left Rear (2) 170-1581 Left Front Right Rear (2) 148-2984 Right Front Left Rear (2) 148-2983 Left Front Right Rear (2) 241-4884 Left Hand (2) 241-4883 Right Hand (2) 170-7660 Left Hand (2) 170-7659 Right Hand 133-5339 175-0389

25

48

(4) 191-0740

Wheel Part Number (4) 128-8113 (4) 200-3189 (4) 164-7970

Rim Width/ (Thickness) inches mm 48 25 48 25 48 25

none none

Traction

Traction

Traction

Traction

Channeled Plus Channeled Plus

Channeled Plus

Channeled Plus

none none

Traction

Traction

Traction

Traction

Chopper

Chopper

Chopper

Chopper

Channeled Plus

Tip Type Channeled Plus Channeled Plus Channeled Plus

none (smooth rim) none (smooth rim)

(44) 107-3487 (RH)

(44) 107-3488 (LH)

(44) 107-3487 (RH)

(44) 107-3488 (LH)

(24) 232-0160 (24) 232-0160

(24) 232-0160

(24) 232-0160

none (smooth rim) none (smooth rim)

(45) 107-3487 (RH)

(45) 107-3488 (LH)

(45) 107-3487 (RH)

(12) 2V-6401 Support (12) 2V-6400 Support (24) 6Y-6766 Blade (ARM) (12) 2V-6401 Support (12) 2V-6400 Support (24) 6Y-6766 Blade (ARM) (12) 2V-6401 Support (12) 2V-6400 Support (24) 6Y-6766 Blade (ARM) (12) 2V-6401 Support (12) 2V-6400 Support (24) 6Y-6766 Blade (ARM) (45) 107-3488 (LH)

(25) 232-0160

Tip Part Number (25) 232-0160 (25) 232-0160 (25) 232-0160

826

193-5773

193-5773

193-5773

193-5773

193-5773

193-5773

193-5773

193-5773

193-5773

193-5773

193-5773

193-5773

193-5773

Ext. Rim

X

X

X

Hard Facing

(5) 2Q-3636 (5) 159-8891

(5) 2Q-3636 (5) 159-8891 (5) 2Q-3636 (5) 159-8891 (5) 2Q-3636 (5) 159-8891

(5) 2Q-3636 (5) 159-8891 (5) 2Q-3636 (5) 159-8891 (5) 2Q-3636 (5) 159-8891

(5) 2Q-3636 (5) 159-8891 (5) 2Q-3636 (5) 159-8891

(5) 2Q-3636 (5) 159-8891

(5) 2Q-3636 (5) 159-8891 (5) 2Q-3636 (5) 159-8891 (5) 2Q-3636 (5) 159-8891

Wear Bars

X

For use with Cleaner Fingers

X

X

Axle Guard

4E-9882 4E-9882

4E-9882

4E-9882

4E-9882

4E-9882

4E-9882 4E-9882

4E-9882

4E-9882

4E-9882 4E-9882

4E-9882

4E-9882

4E-9882

4E-9882

4E-9882

4E-9882

4E-9882

4E-9882

4E-9882

Sidewalls (inner and outer) 4E-9882 4E-9882 4E-9882

Bulldozers / Compactors

COMPACTORS

25 25 25 25 25 25

55 55 55 55 55 55

(2) 216-1388 Right Front Left Rear (2) 216-1387 Left Front Right Rear (2) 189-1585 Right Front Left Rear (2) 189-1584 Left Front Right Rear 171-1446 171-1448

25

55

(4) 190-3731

25 25

55 55

(4) 143-5952 (4) 165-4970

Wheel Part Number

Rim Width/ (Thickness) inches mm

none none

Chopper

Chopper

Chopper

Chopper

Channeled Plus

Channeled Plus Channeled Plus

Tip Type

(14) 2V-6401 Support (14) 2V-6400 Support (28) 6Y-6766 Blade (ARM) (14) 2V-6401 Support (14) 2V-6400 Support (28) 6Y-6766 Blade (ARM) (14) 2V-6401 Support (14) 2V-6400 Support (28) 6Y-6766 Blade (ARM) (14) 2V-6401 Support (14) 2V-6400 Support (28) 6Y-6766 Blade (ARM) none (smooth rim) none (smooth rim)

(35) 232-0160

(35) 232-0160 (35) 232-0160

Tip Part Number

836

167-4009

167-4009

167-4009

167-4009

167-4009

Ext. Rim

X

Hard Facing

(7) 189-6516 (7) 189-9352 (7) 189-6516

(7) 189-6516

(7) 189-6516

(7) 188-9352 (7) 189-6516

(7) 189-6516 (7) 188-9352 (7) 189-6516 (7) 188-9352 (7) 189-6516 (7) 188-9352 (7) 189-6516

Wear Bars

For use with Cleaner Fingers

X

Axle Guard

101-4336 101-4336

101-4336

101-4336

101-4336

101-4336

101-4336

101-4336 101-4336

Sidewalls (inner and outer)

Bulldozers / Compactors COMPACTORS

2-39

Bulldozers / Compactors BULLDOZER BLADES

Caterpillar bulldozer blades are designed for tough dozing, reclamation and push-loading jobs. They are available in six configurations. (See descriptions below.) Cutting edges and end bits are designed and manufactured to

specifications that provide long wear life and the strength necessary to be compatible with the increased productivity of Caterpillar bulldozer blades.

Bulldozer Blade Types Straight (S) Blade is a good general purpose blade for most dozing applications.

Cushion (C) Blade is a relatively narrow blade designed primarily for pushing scrapers.

Universal (U) Blade is designed with large “wings” to more efficiently carry large loads over long distances. Available only for D7 and larger models.

Power Angling and Tilt (P or PAT) Blade is the most versatile blade. Available for D6 and smaller models.

Semi-U (SU) Blade is basically a straight blade with small wings to provide a blade with better load carrying characteristics. Available for D5 and larger models.

Angle (A) Blade is an economical, light to medium duty blade designed for use on D8 and smaller machines where the ability to side-cast is desired.

CUTTING EDGES Features ✔ Made from rolled DH-2 steel. ✔ Thru-hardened. ✔ Optional thicknesses. ✔ Multi-section for wide blades.

Benefits ✔ High strength to resist breaking. ✔ Maximum wear life. ✔ Permits matching edge to job. ✔ Easier handling and storage. Sections can be replaced, switched, or propellered to get maximum use.

Strength and Wear Resistance Thru-hardened DH-2 steel insures Caterpillar bulldozer edges provide the greatest possible strength and maximum wear resistance. Because of DH-2 steel, Caterpillar is able to offer a free edge for one that breaks during operation.

Multi-section Edges Caterpillar offers bulldozer edges in sections for easier handling, storage, installation, and turning. Maintenance time is reduced. And since pieces can be replaced, switched, or turned individually, users can save money by getting maximum wear life from each piece. Note: For special guidance on when or when not to recommend turning and switching, see Customer Service Tips at the end of this section.

Optional Edge Thicknesses For longer edge life in abrasive conditions and increased penetration capabilities in compacted materials, Caterpillar offers optional edge thicknesses for many dozer models. Consult part number pages of this section to determine where optional thickness edges are available.

2-40

Bulldozers / Compactors BULLDOZER END BITS

END BITS Extended Wear Life (EWL) — have a contoured design which matches the cutting edge thickness in the bolt hole area and are the thicker in the wear area which extends beyond the support. This additional wear material provides an excellent cutting-edge-to-end-bit wear ratio in abrasive conditions and provides for longer end bit life. EWL

General Duty (GD) — have a contoured design which matches the cutting edge thickness in the bolt hole area and is thicker, but not as thick as the EWL, in the wear area that extends beyond the support. They are well suited to most dozing applications (9W, 8E part numbers in GD column). It is made from thru-hardened DH-3 steel for the D7-D11 machines and thru-hardened DH-2 steel for the D3-D6 machines. General Duty

Utility — have a flat plate design for use in applications where face wear is a problem or where initial price is the main purchase criteria. Provides good corner protection in high impact, high abrasion materials. It is made from thru-hardened DH-2 rolled plate steel.

Utility End Bit

Finish Dozing (Level Cut) — match the depth of cut of the cutting edges and protect the blade corner in low impact, low abrasion materials. They are recommended for finish and semi-finish dozing. Not available for the largest dozers. It is made from thru-hardened DH-2 rolled plate steel.

Finish Dozing

2-41

Bulldozers / Compactors BULLDOZER END BITS AND EDGES

END BITS AND EDGES

Abrasion/Impact — for high-abrasion applications where both penetration and wear-resistance are needed such as dozing clay, loam, silt, sand, and gravel. Features a 16 degree angle for better penetration. It is hotcupped from DH-2 steel and thru-hardened for greater wear life (3G, 1U, 7T part numbers in GD column).

Hot cupped

— for high-impact applications where more strength is required — such as dozing blasted rock, slabs and boulders. It is reinforced in critical areas, forged from DH-2 steel and thru-hardened for greater wear life (3J, 4J, 5J, 9J, 9F, 1U, 7T part numbers in GD column). Impact Forged

Heavy Duty Mining End Bits and Edges — for high-abrasion and/or high-impact applications where penetration is not a problem. These systems will significantly extend edge and end-bit life and provide increased resistance to breakage. This is a three-piece system with a center edge 2-3/8" (60 mm) thick, and right- and left-end edge/end-bits which are 4-3/4" (120 mm) thick. The end-edge/end-bits are made from two 2-3/8" (60 mm) thick sections welded together at the end-bit position. Thicker end bits are required to match end bit to cutting-edge wear patterns. The heavy duty options are made from Caterpillar DH-2 flat-plate sections which are through-hardened for superior strength and wearlife capabilities.

2-42

Heavy Duty Mining

Bulldozers / Compactors BULLDOZERS

CUTTING EDGE HARDWARE Cat cutting edge hardware meets or exceeds requirements for SAE Grade 8 threaded fasteners. Bolt heads are dome-shaped for added strength and wear-resistance. Nuts are thru-hardened to match the strength of the bolts. See page 2-45 for hardware data and part numbers.

BULLDOZER WEAR PLATES Wear plates and push plates provide an inexpensive way to prolong bulldozer service life. Both types of plates are formed of high strength alloy steel. They are curved to fit the contour of the moldboard and are easily attached with fillet welds. Wear Plates Used to repair damage to small areas or to resurface an entire moldboard. In extremely abrasive or severe impact conditions, it may even be desirable to install wear plates on new dozers before they are put into service.

Wear Plates

Push Plates Push plates are installed on dozers used for the dual purpose of push loading scrapers and for dozing.

Push Plates

DOZER WEAR BARS Wear bars provide additional blade protection in highly abrasive applications where short moldboard life has been encountered. Dozer wear bars are designed to be welded on top of the normal blade liner. Welding on top of the blade liner eliminates the possibility of burning through the skin of the dozer blade and generating costly repairs. Placing the wear bars on top of a liner also develops a stronger blade. Dozer wear bars come in six lengths to allow a customer to tailor the placement of the wear protection while minimizing the amount of throwaway iron. Part numbers for the various lengths are shown below: Length Part Number Feet mm 107-3386 8 2438 107-3387 9 2743 107-3388 11 3353 107-3389 12 3658 107-3390 13 3962 107-3391 15 4572 Dozer wear bars are made from DH-2 steel alloy, through-hardened for greater wear resistance and strength. Core hardness of the bars will be between 45-52 Rc (2.7-3.0 BR). If the bars are to be flame cut, the burn zone must be preheated to 150-230°C. It is also recommended to preheat the bars to the 150-230°C temperature when welding on top of the liner. The bars are to be positioned so the bevel is next to the liner as shown at right.

Wear Bars

2-43

Bulldozers / Compactors BULLDOZERS

COMPACTORS (EARTHMOVING) Caterpillar offers three tip options for earth-fill compactors, each designed for effective compaction in different materials. Tamping Foot Caterpillar tamping feet are designed for use in low impact conditions. They are manufactured from DH-2 Steel and heat-treated for strength and long wear life.

Rock Tamping Foot Rock tamping feet are designed to withstand the impact encountered when compacting rocky material. They are manufactured from DH-2 Steel and heat-treated for strength and long wear life.

COMPACTORS (LANDFILL) Caterpillar offers one blade and two tip options for landfill compactors. ARM Chopper Blades Chopper blades are designed specifically for use in sanitary landfill applications. They provide good traction and aggressive chopping action in all types of trash. They are manufactured from heat-treated DH-2 Steel.

Blade Support Plate

ARM Chopper Blade

Plus Tip (Weld-on) Thick-walled DH-2 steel designed specifically for landfill applications. Offers improved compaction and traction ability compared to current chopper blades and competitive tips. They have more wear material and fewer teeth required per wheel than competitive teeth and complete wear life when the wheel assembly is rotated. Has Abrasion Resistant Material (A.R.M.) applied across the top for increased traction. 10,000 hours or 4 years of service life prorated warranty (See Warranty).

Traction Tip Designed for applications where maximum traction is required. Perform best in frozen or other difficult to penetrate applications. These tips are forged for maximum strength and Abrasion Resistant Material (A.R.M.) is applied to critical wear areas.

2-44

Bulldozers / Compactors BULLDOZERS

CUSTOMER SERVICE TIPS 1. Keep hardware tight. Loose or missing bolts increase loads and can cause hardware failure. In addition, prolonged operation with loose hardware can cause bolts to elongate mounting holes in the support. This makes it increasingly difficult to keep hardware tight. Repeated burning-off of hardware has the same effect. And burning weakens the support around bolt holes. To insure tight hardware: • After many hours in high impact conditions, bolts used on GET components could experience metal fatigue. If bolt loosening occurs after following recommended mounting procedures, bolt stretch may have occurred. Use new bolts and nuts when installing new GET components. • When installing new cutting edges, or end bits, be sure that the supporting surfaces are free of dirt, debris, paint, scale, rust or weld splatter. Mating surfaces must be clean and flat to insure maximum clamping force is obtained. • Bolt and nut threads must be clean. Do not apply lubricant of any type to GET hardware. • When installing cutting edge bolts, start at the center and work out toward the ends, or begin at one end and work to the other. Never work from both ends toward the center. • When installing end bits, start at the middle and work toward the outside edge. Finish the sequence by then tightening from the middle and working to the inside edge. • Tighten bolts to proper torque requirements. • Seat the bolt heads in the countersink with a heavy hammer, (wear safety glasses whenever striking metal objects with a hammer). • Tighten the bolts again to the proper torque requirements. Note: The torque values specified for GET plow bolts and nuts are greater than the standard specifications; however, after a short period of operation, the mating surfaces will seat more uniformly and the bolt torque will reduce to approximately standard values. 2. Avoid excessive speed. Slow, steady prying force is more desirable than high speed impact when a boulder or other tough obstacle is encountered. Speed also accelerates wear on track and imposes potentially damaging loads on dozer frames, drive train, and hydraulics. 3. When downtime and production schedules are key factors, it is usually more economical to turn or replace all edges and bits simultaneously — even though all parts are not completely worn. Downtime and labor costs involved in selectively changing, turning, or rotating dozer edges make such a procedure uneconomical, particularly for a large fleet. When downtime is not a pressing problem and labor cost is not a critical factor, it is possible to lower replacement parts costs considerably by replacing or turning individual edge sections and bits as wear limits are reached.

2-45

Bulldozers / Compactors BULLDOZER CONVERSION PROCEDURE

Outline A) B) C) D) E)

Determine cutting edge dimensions. Select cutting edges from dimensional charts. Select end bits from dimensional charts. Modify cutting edges and/or end bit support if necessary. Install System.

Cutting Edge Conversion Procedure The following procedure is designed to select and/or modify a Cat edge to match the competitive edge in dimension. This procedure assumes that the former cutting edges on the bulldozer are available for inspection and measurement.

Step 1

L A

W D

C B T TYPE 1

L

D

There are two possible suffixes to the type. They are B and E. The B stands for two extra bolt holes described in Step 2 #7 — Number of Bolt Holes. The E stands for Extended Wear Life Edge described in Section 2.3.

Step 2

A

W

Use the drawings at left to determine edge type — 1, 2, 3 or 4.

Obtain the following dimensions from the competitive edges as shown on the drawings.

C B T TYPE 2

1. Length (L) L A

W B

C

D T TYPE 3

(Edges with offset bolt holes only)

L A

W D

C B T TYPE 4

Moldboard Cutting Edge Support

X

Y FIGURE 1

FIGURE 2

2-46

2. Width (W) — Original width is best obtained from competitive literature or parts books. If that is not possible, find a new edge or one that is only half worn. Measure the width from bolt hole centers to unworn surface and double that dimension. As a last resort, measure the cutting edge support from the center ring of the bolt holes to the point where the support begins to curve. Usually this point is where the moldboard is welded to the support. See Figure 1. This is dimension “X” in Figure 1. Double it to determine the approximate maximum edge width which can be used. Some bulldozers have cutting edges that bolt directly to the moldboard as shown in Figure 2. In this case, measure from the center line of the bolt holes to the point where the moldboard begins to curve. This point is determined by laying a straight edge on the moldboard and sliding it upward until it no longer lays flat on the moldboard. This measurement is “Y” in Figure 2. Double the value of “Y” to determine the maximum width edge which can be used. CAUTION: Before modifying edges to fit a competitive bulldozer, bolt an edge of the width selected to the bulldozer to make sure that the edges will bolt up properly.

Bulldozers / Compactors BULLDOZER CONVERSION PROCEDURE

3. End Bolt Locations (B and D) — In many cases, B and D will be equal. 4. Bolt Hole Spacing (C) — Caterpillar cutting edges have 6" (152.4 mm) or 4" (101.6 mm) bolt hole spacing. If the competitive edge has different spacing, the moldboard must be drilled and plug welded to accept Cat Ground Engaging Tools. 5. Thickness (T) — Measure the competitive edge and use that thickness or refer to the chart below. The chart lists recommended cutting edge thicknesses by tractor weight, horsepower or similar size Cat model. Remember, the thinner the edge, the greater the penetration, but wear life and breakage resistance are reduced. Also, the thicker the edge, the greater the wear life and breakage resistance, but the penetration ability is reduced. THICKNESS SELECTION CHART

Weight (lbs.) 160,000-200,000 135,300-160,000 85,000-135,000 60,000-85,000 40,000-60,000 10,000-40,000

Horsepower 650-800 520-650 360-520 260-360 190-260 50-190

Similar Size Cat Model D11N D10N D9N D8N D7H D6 and smaller

Recommended Cutting Edge Thickness 1.75"-2.36" 1.37"-1.75" 1.37"-1.75" 1.0"-1.37" 0.75"-1.0" 0.62"-0.75"

6. Bolt Size Required — Sometimes it is necessary to drill supports oversize to accept Caterpillar edges. 7. Number of Bolt Holes — Count only the bolt holes on 4" (101.6 mm) or 6" (152.4 mm) spacing. Some competitive bulldozers and some edges for Cat D10 and D11 Bulldozers have extra bolt holes between the last two on the ends of the edges. As a result, the last three holes on each end are 3" (76.2 mm) apart. The dimensional tables included in this guide ignore the extra holes. Do not worry about them when measuring competitive edges. Once all pertinent dimensions are obtained, go to Step 3.

Step 3 Refer to the Bulldozer Cutting Edge Conversion Tables. Find the section of the chart which most closely matches the maximum edge width (W) needed. NOTE: Do not select a chart which exceeds the maximum edge width by more than 0.75" (19 mm). Find an edge with the same bolt hole size and spacing, and total length needed ±0.25" (7 mm). Make sure that the edge thickness is close to what is correct for the machine. If no edge can be found, go to Step 4.

Step 4 Find an edge with the same hole size and spacing, but longer length. Cut the edge to size. NOTE: It may be possible to reduce waste by making two edges to fit competitive machines from one Caterpillar edge. To determine if this can be done, add the number of bolt holes on 4" (101.6 mm) or 6" (152.4 mm) spacing from both competitive edges.

2-47

Bulldozers / Compactors BULLDOZER CONVERSION PROCEDURE

Extended Wear Life Edge Installation Edges are for D8K, early D8L*, D9H, and early D9L* Special Extended Wear Life (EWL) edges are available for conversion of competitive bulldozers which have maximum cutting edge widths of 10" (254 mm) and 13" (330 mm). These edges provide significantly greater wear life because 13" (330 mm) and 15.75" (400 mm) wide edges are used instead of 10" (254 mm) and 13" (330 mm) wide edges respectively. To install EWL edges, follow Steps 1 through 3 as shown below. EWL edges should be used with EWL end bits to obtain the greatest possible wear life from the Extended Wear Life Edge System. Remember, the special EWL edges with offset bolt holes, must be installed initially long side down. For this reason, edges with mitered ends are serviced as two separate part numbers. When cutting is necessary, it is important to cut the miter in the same pattern as on the original edge. Special EWL edges with offset bolt holes are listed with an E suffix on the Type in the dimensional tables. * 8L (04Y1-1939, 6Y1-1395); D9L (18Y1-1875, 19Y1-1474).

A B A=B

Standard Edges

A

B

≠B A≠

2-48

Extended Wear Life Edges (Different Part # for RH & LH edges)

Bulldozers / Compactors BULLDOZERS L

L A

W D

C B T

L

L A

W

A

W D

C B T

TYPE 1

B

C

TYPE 2

A

W D

D T

C B T TYPE 4

TYPE 3 (Edges with offset bolt holes only)

CUTTING EDGE DIMENSIONS in. 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 IRR

W L mm in. mm 406 167.7 4260 406 146.5 3721 406 59.8 1518 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406

53.3 53.3 48.1 48.1 48.1 48.1 43.2 43.2 41.9 41.9 40.9 40.9 40.9 40.5 40.5 40.3 40.3 40.3 40.3 40.2 40.2 39.1 39.1 39.1 35.8 35.8 35.4 34.5 34.5 33.8 33.8 33.8 33.5 33.5 33.5 33.5 32.7 32.7 30.8 30.8 29.8 29.8

1353 1353 1223 1223 1223 1223 1098 1098 1064 1064 1039 1039 1039 1029 1029 1024 1024 1023 1023 1020 1020 992 992 992 909 909 900 877 877 859 859 859 851 851 851 851 832 832 783 783 757 757

T in. 2.36 2.36 1.38

Part mm No. 60 107-3523 60 107-3510 35 7T-8989

Dim A in. mm 8.0 203 8.0 203 8.0 203

Dim B Dim C in. mm in. mm 2.0 50 IRR IRR 2.0 50 IRR IRR 2.9 73 6.0 152.4

Dim D No. of in. mm Holes 2.0 50 28 2.2 55 22 2.9 73 10

1.77 1.38 1.77 1.77 1.38 1.38 2.36 1.77 2.36 1.77 1.77 1.57 1.38 2.36 1.77 2.36 1.77 2.36 1.77 2.36 1.77 2.36 1.77 1.38 1.77 1.38 1.57 1.77 1.38 2.36 1.77 1.38 2.36 1.77 1.38 1.38 1.77 1.38 1.77 1.77 1.77 1.38

45 35 45 45 35 35 60 45 60 45 45 40 35 60 45 60 45 60 45 60 45 60 45 35 45 35 40 45 35 60 45 35 60 45 35 35 45 35 45 45 45 35

7.1 7.1 7.1 7.1 7.1 7.1 8.0 8.0 8.0 8.0 7.1 7.1 7.1 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 7.1 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0

2.6 2.6 2.8 2.8 2.8 2.8 3.6 3.6 3.0 3.0 2.5 2.5 2.5 2.3 2.3 2.0 2.0 2.1 2.1 2.0 2.0 4.5 4.5 4.5 2.9 2.9 2.7 5.0 5.0 5.4 5.4 5.4 4.7 4.7 4.8 4.7 5.0 5.0 3.7 3.7 2.9 2.9

2.6 2.6 3.3 3.3 3.3 3.3 3.6 3.6 3.0 3.0 2.5 2.5 2.5 2.3 2.3 2.3 2.3 2.1 2.1 2.2 2.2 4.5 4.5 4.5 2.9 2.9 2.7 5.5 5.5 4.4 4.4 4.4 4.7 4.7 4.8 4.7 3.7 3.7 3.1 3.1 2.9 2.9

6Y-0479 6Y-0313 6Y-0477 6Y-0478 6Y-0311 6Y-0312 9W-4495 9W-2426 6Y-0023 6Y-0018 6Y-0476 7T-4342 6Y-0310 6Y-0021 6Y-0016 6Y-0020 6Y-0017 9W-4493 9W-2424 9W-4494 9W-2425 8E-2085 9W-6656 9W-6609 9W-3928 7T-9782 7T-4341 9W-3929 7T-9781 8E-2086 9W-6657 9W-6608 8E-2087 9W-6658 4T-6593 9W-6615 9W-3930 7T-9779 6Y-0022 6Y-0019 9W-3931 9W-0775

180 180 180 180 180 180 203 203 203 203 180 180 180 203 203 203 203 203 203 203 203 203 203 203 203 203 180 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203

67 67 71 71 71 71 92 92 75 75 63 63 63 58 58 52 52 55 55 50 50 115 115 115 74 74 69 127 127 138 138 138 119 119 121 119 127 127 93 93 74 74

6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0

152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4

67 67 85 85 85 85 92 92 75 75 63 63 63 58 58 58 58 55 55 56 56 115 115 115 74 74 69 140 140 111 111 111 119 119 121 119 95 95 80 80 74 74

9 9 8 8 8 8 9 9 9 9 7 7 7 9 9 9 9 9 9 9 9 6 6 6 6 6 6 5 5 5 5 5 5 5 5 5 5 5 7 7 5 5

Bolt Dia. Edge Dozer in. mm Type Model 1.25 32 4 11SU HD 1.25 32 4 10SU HD 1.00 25 1 NO MODEL 1.00 25 1E 9U 1.00 25 1E 9U 1.00 25 2E 9SU 1.00 25 3E 9SU 1.00 25 2E 9SU 1.00 25 3E 9SU 1.25 32 1B 11SU,U 1.25 32 1B 11SU,U 1.25 32 1B 10U 1.25 32 1B 10U 1.00 25 1E 9SU 1.00 25 1E 9SU 1.00 25 1E 9SU 1.25 32 1B 10SU 1.25 32 1B 10SU 1.25 32 2B 10SU 1.25 32 2B 10SU 1.25 32 1B 11U 1.25 32 1B 11U 1.25 32 2B 11SU,U 1.25 32 2B 11SU,U 1.25 32 1 10SU 1.25 32 1 10SU 1.25 32 1 10SU 1.25 32 1 9SU 1.25 32 1 9SU 1.00 25 1E 9U 1.25 32 4 9U 1.25 32 4 9U 1.25 32 4 10SU,10U 1.25 32 4 10SU,10U 1.25 32 4 10SU,10U 1.25 32 1 10U 1.25 32 1 10U 1.25 32 1 10U 1.25 32 1 10U 1.25 32 4 9SU 1.25 32 2 9SU 1.25 32 3B 10U 1.25 32 2B 10U 1.25 32 1 9U 1.25 32 1 9U

Irregular hole spacing. Call (309) 675-6026 or (309) 675-4657 for details.

2-49

Bulldozers / Compactors BULLDOZERS L

L A

W D

C B T

L

L A

W

A

W D

C B T

TYPE 1

B

TYPE 2

C

A

W

D T TYPE 3

D

C B T TYPE 4

(Edges with offset bolt holes only)

CUTTING EDGE DIMENSIONS W in. mm 16 406 16 406 16 406 16 406 16 406 16 406 16 406 14 360 14 360 14 360 14 360 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 IRR

2-50

L in. 24.9 24.9 24.9 24.9 24.4 23.2 23.2 62.0 53.5 45.5 41.5 127.4 89.1 89.1 89.1 85.2 85.2 85.2 85.2 77.7 76.9 70.4 70.4 70.4 70.4 69.8 66.7 66.7 66.7 61.3 60.3 59.8 59.8 53.8 53.8 53.3 53.3 53.3 53.3 48.8 48.8 48.8 48.1 48.1 48.1 47.9

T

mm 633 633 633 633 620 589 589 1575 1359 1156 1054 3237 2264 2264 2264 2164 2164 2164 2164 1974 1953 1787 1787 1787 1787 1773 1694 1694 1694 1558 1532 1520 1520 1367 1367 1353 1353 1353 1353 1240 1240 1240 1223 1223 1223 1218

Part in. mm No. 1.77 45 6Y-0480 1.77 45 6Y-0481 1.38 35 6Y-0314 1.38 35 6Y-0315 1.77 45 107-8586 1.57 40 7T-4336 1.57 40 7T-4337 1.18 30 1U-1534 1.18 30 1U-1537 1.18 30 1U-1536 1.18 30 1U-1538 1.57 40 4T-0840 1.77 45 9W-7044 1.38 35 7T-5701 1.12 29 6Y-5538 2.36 60 113-0323 1.77 45 9W-3926 1.38 35 9W-4397 1.12 29 4T-9590 1.57 40 7J-2963 1.12 29 4Z-9058 2.36 60 113-0322 1.77 45 9W-7043 1.38 35 7T-5702 1.12 29 6Y-5539 2.36 60 109-3146 1.77 45 9W-3925 1.38 35 9W-4396 1.12 29 4T-9586 2.36 60 109-9014 1.57 40 6Y-5777 1.57 40 7J-2962 1.57 40 6Y-5776 1.57 40 7J-2965 1.12 29 4T-6387 1.77 45 112-2472 1.57 40 9W-4507 1.38 35 7T-9126 1.12 29 4T-6381 1.77 45 112-2474 1.38 35 9W-9098 1.12 29 9W-5432 1.57 40 9W-4508 1.38 35 9W-4502 1.12 29 4T-6385 1.38 35 9J-3751

Dim A in. mm 7.1 180 7.1 180 7.1 180 7.1 180 8.0 203 7.1 180 7.1 180 7.1 180 7.1 180 7.1 180 7.1 180 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 5.5 140 6.5 165 6.5 165 6.5 165 5.5 140 5.5 140 6.5 165 5.5 140 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165

Irregular hole spacing. Call (309) 675-6026 or (309) 675-4657 for details.

Dim B in. mm 2.0 50 2.0 50 2.0 50 2.0 50 3.9 99 2.6 66 2.6 66 4.0 102 2.8 70 1.8 45 2.8 70 3.7 95 2.6 65 2.6 65 2.6 66 3.6 92 3.6 92 3.6 92 3.6 92 2.9 73 2.4 62 2.2 56 2.2 56 2.2 56 2.2 56 1.9 49 3.3 85 3.3 85 3.3 85 3.7 93 3.2 80 2.9 74 2.9 74 2.9 74 2.9 74 2.6 67 2.6 67 2.6 67 2.6 67 3.4 87 3.4 87 3.4 87 2.8 71 2.8 71 2.8 71 3.0 76

Dim C in. mm IRR IRR IRR IRR IRR IRR IRR IRR IRR IRR 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4

Dim D No. of in. mm Holes 2.0 50 6 2.0 50 6 2.0 50 6 2.0 50 6 3.9 99 4 2.6 66 4 2.6 66 4 4.0 102 10 2.8 70 9 1.8 45 8 2.8 70 7 3.7 95 21 2.6 65 15 2.6 65 15 2.6 66 15 3.6 92 14 3.6 92 14 3.6 92 14 3.6 92 14 2.9 73 13 2.4 62 13 2.2 56 12 2.2 56 12 2.2 56 12 2.2 56 12 1.9 49 11 3.3 85 11 3.3 85 11 3.3 85 11 3.7 93 10 3.2 80 10 2.9 74 10 2.9 74 10 2.9 74 9 2.9 74 9 2.6 67 9 2.6 67 9 2.6 67 9 2.6 67 9 3.4 87 8 3.4 87 8 3.4 87 8 3.3 85 8 3.3 85 8 3.3 85 8 3.0 76 8

Bolt Dia. Edge Dozer in. mm Type Model 1.00 25 2E 9U 1.00 25 3E 9U 1.00 25 2E 9U 1.00 25 3E 9U 1.25 32 1 9U 1.00 25 2E 9U 1.00 25 3E 9U 0.75 19 1 MP 0.75 19 1 MP 0.75 19 1 MP 0.75 19 1 MP 1.00 25 1 9SU 1.00 25 1 9U 1.00 25 1 9U 1.00 25 1 9U 1.00 25 1 8U 1.00 25 1 8U 1.00 25 1 8U 1.00 25 1 8U 1.00 25 2 9U 1.00 25 1 8SU 1.00 25 1 9SU 1.00 25 1 9SU 1.00 25 1 9SU 1.00 25 1 9SU 0.875 22 1E 834S 1.00 25 1 8SU 1.00 25 1 8SU 1.00 25 1 8SU 0.875 22 1E 824S 0.875 22 1E 8SU 1.00 25 1 9SU 0.875 22 1E 8SU 1.00 25 1 9A 1.00 25 1 9A 1.00 25 1 8SU 1.00 25 1 9U 1.00 25 1 9U,8SU 1.00 25 1 9U,8SU 1.00 25 1 8A 1.00 25 1 8A 1.00 25 1 8A 1.00 25 4 9SU 1.00 25 4 9SU 1.00 25 4 9SU 1.00 25 1 10C

Bulldozers / Compactors BULLDOZERS L

L A

W D

C B T

L

L A

W

A

W D

C B T

TYPE 1

TYPE 2

B

C

A

W

D T TYPE 3

D

C B T TYPE 4

(Edges with offset bolt holes only)

CUTTING EDGE DIMENSIONS W in. mm 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 13 330 IRR

L in. 47.8 47.8 43.1 43.1 42.4 41.8 41.8 40.9 40.9 40.9 40.7 39.3 38.5 38.5 38.3 38.3 36.3 35.8 35.7 35.4 35.4 35.4 35.4 33.7 32.4 32.4 32.4 31.9 31.9 31.6 31.6 31.6 31.5 31.5 31.5 31.4 31.4 30.7 30.7 30.5 30.5 27.7 27.7 24.9 24.9 24.9

T

mm 1215 1215 1094 1094 1076 1062 1062 1039 1039 1039 1034 998 979 979 974 974 922 910 907 900 900 900 900 856 824 824 824 810 810 803 803 803 800 800 800 798 798 780 780 776 776 704 704 633 633 633

Part in. mm No. 1.57 40 7T-4351 1.12 29 4Z-8039 2.36 60 128-5695 1.57 40 7T-4347 2.36 60 123-3754 1.57 40 7J-2966 1.12 29 4T-6388 1.57 40 7J-2980 1.38 35 9W-4500 1.12 29 4T-6386 1.57 40 7T-4353 2.36 60 130-7869 2.36 60 132-1043 2.36 60 132-1042 2.36 60 123-3756 2.36 60 123-3755 1.57 40 7T-4352 1.57 40 7T-4348 1.57 40 7J-2964 1.77 45 112-2475 1.57 40 7J-2959 1.38 35 9W-6092 1.12 29 4T-6378 1.57 40 7T-5235 1.77 45 112-2473 1.38 35 7T-9127 1.12 29 9W-5232 1.57 40 7T-4345 1.57 40 7T-4346 1.77 45 112-2471 1.38 35 7T-9125 1.12 29 6Y-5540 2.36 60 113-0321 1.77 45 9W-3927 1.38 35 9W-4398 2.36 60 128-5696 2.36 60 128-5697 1.57 40 7T-4349 1.57 40 7T-4350 2.36 60 109-9095 2.36 60 109-9096 2.36 60 132-1041 2.36 60 132-4730 1.57 40 9W-4506 1.38 35 9W-4503 1.12 29 4T-6382

Dim A in. mm 5.5 140 6.5 165 5.5 140 5.5 140 5.5 140 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 5.5 140 6.5 165 6.5 165 6.5 165 5.5 140 5.5 140 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 6.5 165 6.5 165 6.5 165

Dim B Dim C in. mm in. mm 2.9 74 6.0 152.4 2.9 74 6.0 152.4 3.5 90 6.0 152.4 3.5 90 6.0 152.4 3.2 81 6.0 152.4 2.9 74 6.0 152.4 2.9 74 6.0 152.4 2.5 63 6.0 152.4 2.5 63 6.0 152.4 2.5 63 6.0 152.4 2.4 60 6.0 152.4 1.7 42 6.0 152.4 3.5 89 6.0 152.4 3.5 89 6.0 152.4 2.9 73 6.0 152.4 2.9 73 6.0 152.4 3.1 80 6.0 152.4 2.9 74 6.0 152.4 2.9 73 6.0 152.4 2.7 69 6.0 152.4 2.7 69 6.0 152.4 2.7 69 6.0 152.4 2.7 69 6.0 152.4 1.9 47 6.0 152.4 4.7 120 6.0 152.4 4.7 120 6.0 152.4 4.7 120 6.0 152.4 3.9 100 6.0 152.4 3.9 100 6.0 152.4 4.7 120 6.0 152.4 4.7 120 6.0 152.4 4.7 120 6.0 152.4 4.6 117 6.0 152.4 4.6 117 6.0 152.4 4.6 117 6.0 152.4 3.5 88 6.0 152.4 3.5 88 6.0 152.4 3.8 97 6.0 152.4 3.8 97 6.0 152.4 2.9 73 6.0 152.4 3.7 93 6.0 152.4 1.7 42 6.0 152.4 2.0 52 6.0 152.4 2.0 50 IRR IRR 2.0 50 IRR IRR 2.0 50 IRR IRR

Dim D No. of in. mm Holes 2.9 74 8 2.9 74 8 3.5 90 7 3.5 90 7 3.2 81 7 2.9 74 7 2.9 74 7 2.5 63 7 2.5 63 7 2.5 63 7 2.4 60 7 1.7 42 7 3.5 89 6 3.5 89 6 5.5 139 6 5.5 139 6 3.1 80 6 2.9 74 6 2.9 73 6 2.7 69 6 2.7 69 6 2.7 69 6 2.7 69 6 1.9 47 6 3.7 95 5 3.7 95 5 3.7 95 5 3.9 100 5 3.9 100 5 2.9 74 5 2.9 74 5 2.9 74 5 2.9 74 5 2.9 74 5 2.9 74 5 3.9 100 5 3.9 100 5 2.9 74 5 2.9 74 5 3.7 93 5 2.9 73 5 2.0 52 5 1.7 42 5 2.0 50 6 2.0 50 6 2.0 50 6

Bolt Dia. Edge Dozer in. mm Type Model 1.00 25 1E 8A 1.00 25 1 0.875 22 1E 834U 1.00 25 1E 8U 0.875 22 1E 834U 1.00 25 1 9A 1.00 25 1 9A,9C 1.00 25 1 9SU,9R 1.00 25 1 9SU 1.00 25 1 9SU,9R 1.00 25 1E 8A 0.875 22 1E 834U 0.875 22 2E 824U 0.875 22 3E 824U 0.875 22 2E 834U 0.875 22 3E 834U 1.00 25 1E 8A,8U 0.875 22 1E 8A 1.00 25 1 9U 1.00 25 1 8U 1.00 25 1 9U 1.00 25 1 8U,9U 1.00 25 1 8U,9U 1.00 25 1E 8SU 1.00 25 2 8U 1.00 25 2 8U 1.00 25 2 8U 1.00 25 2E 8SU,8U 1.00 25 3E 8SU,8U 1.00 25 2 8SU 1.00 25 2 8SU,9SU 1.00 25 2 9SU,8SU 1.00 25 2 9SU 1.00 25 2 9SU 1.00 25 2 8SU 0.875 22 3E 834U 0.875 22 2E 834U 1.00 25 2E 8U 1.00 25 3E 8U 0.875 22 1E 824S 0.875 22 1E 824S 0.875 22 1E 824U 0.875 22 1E 824U 1.00 25 2 9U 1.00 25 2 9U 1.00 25 2 9U

Irregular hole spacing. Call (309) 675-6026 or (309) 675-4657 for details.

2-51

Bulldozers / Compactors BULLDOZERS L

L A

W D

C B T

L

L A

W

A

W D

TYPE 1

C B T

B

TYPE 2

C

A

W

D T TYPE 3

D

C B T TYPE 4

(Edges with offset bolt holes only)

CUTTING EDGE DIMENSIONS W in. mm 13 330 13 330 13 330 13 330 12 305 12 305 12 305 12 305 12 305 12 305 12 305 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 11 280 10 254 10 254 10 254 10 254 10 254 10 254 10 254 IRR

2-52

L in. 23.2 23.2 23.2 23.2 138.9 87.0 77.7 59.8 52.2 37.4 35.7 60.3 59.8 59.8 53.4 47.8 44.0 43.6 43.6 43.1 43.1 41.8 41.8 41.0 40.7 38.7 36.3 36.3 35.8 35.7 35.7 35.2 35.2 33.7 32.2 31.9 30.7 29.8 22.3 119.8 109.8 99.8 91.8 91.8 80.3 69.8

T

mm 589 589 589 589 3529 2209 1974 1520 1325 951 907 1532 1520 1520 1357 1215 1117 1108 1108 1094 1094 1062 1062 1041 1034 983 923 922 910 908 908 894 894 856 817 810 779 758 567 3044 2790 2534 2332 2332 2040 1773

Part in. mm No. 1.57 40 7J-2979 1.38 35 9W-9197 1.12 29 4T-6377 1.12 29 4T-6379 1.12 29 4T-6455 1.12 29 4T-6450 1.12 29 4T-6453 1.12 29 4T-6448 1.12 29 4T-6459 1.12 29 4T-6456 1.12 29 4T-6457 1.38 35 6Y-6763 1.38 35 6Y-6765 1.38 35 6Y-6764 1.00 25 9W-9793 1.38 35 9W-8658 1.00 25 1U-1539 1.38 35 145-7846 1.00 25 135-6537 1.38 35 6Y-6360 1.00 25 7T-6589 1.00 25 9W-9794 1.00 25 9W-9796 1.00 25 1U-1535 1.38 35 9W-8657 1.00 25 7T-6591 1.38 35 9W-8655 1.38 35 6Y-6762 1.38 35 6Y-6761 1.38 35 107-3362 1.00 25 7T-6936 1.38 35 107-3363 1.00 25 7T-6678 1.38 35 6Y-6358 1.00 25 9W-9792 1.38 35 6Y-6359 1.38 35 9W-8656 1.00 25 9W-9795 1.00 25 7T-6592 0.75 19 4T-2951 1.00 25 4T-2866 1.00 25 4T-6509 1.00 25 4T-2864 0.75 19 4T-2954 1.00 25 4T-2867 1.00 25 4T-6515

Dim A in. mm 6.5 165 6.5 165 6.5 165 6.5 165 6.0 153 6.0 153 6.0 153 6.0 153 6.0 153 6.0 153 6.0 153 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.0 127 5.0 127 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.5 140 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127

Irregular hole spacing. Call (309) 675-6026 or (309) 675-4657 for details.

Dim B in. mm 2.6 66 2.6 66 2.6 66 2.6 66 3.5 88 1.5 38 2.9 73 2.9 74 2.1 53 3.7 95 2.9 73 3.1 80 2.9 74 2.9 74 2.7 69 2.9 74 4.0 102 3.8 97 3.8 97 3.5 90 3.5 90 2.9 74 2.9 74 2.5 64 2.4 60 3.2 82 3.2 81 3.1 80 2.9 74 2.6 66 2.6 66 2.6 66 2.6 66 1.9 47 4.1 104 3.9 100 3.8 96 2.9 74 2.2 55 2.9 74 3.9 100 1.9 48 1.9 49 1.9 49 4.2 106 1.9 49

Dim C in. mm 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 4.0 101.6 6.0 152.4 6.0 152.4

Dim D No. of in. mm Holes 2.6 66 4 2.6 66 4 2.6 66 4 2.6 66 4 3.5 88 23 1.5 38 15 2.9 73 13 2.9 74 10 2.1 53 9 3.7 95 6 2.9 73 6 3.1 80 10 2.9 74 10 2.9 74 10 2.7 69 9 2.9 74 8 4.0 102 7 3.8 97 7 3.8 97 7 3.5 90 7 3.5 90 7 2.9 74 7 2.9 74 7 2.5 64 7 2.4 60 7 5.5 139 6 3.2 81 6 3.1 80 6 2.9 74 6 3.1 80 6 3.1 80 6 2.6 66 6 2.6 66 6 1.7 47 6 4.1 104 5 3.9 100 5 2.9 74 5 2.9 74 5 2.2 55 4 2.9 74 20 3.9 100 18 1.9 48 17 1.9 49 23 1.9 49 23 4.2 106 13 1.9 49 12

Bolt Dia. Edge Dozer in. mm Type Model 1.00 25 2 9U 1.00 25 2 9U 1.00 25 1 9U 1.00 25 2 9U 1.00 25 1 824 1PIECE 1.00 25 1 9C 1.00 25 4 9U 1.00 25 1 9SU,824 1.00 25 1 9SU 1.00 25 1 9SU 1.00 25 1 9U 0.875 22 1 8SU 0.875 22 4 8U 0.875 22 1 8SU 0.875 22 2 7U 1.00 25 1 8A 0.625 16 1 MP 0.875 22 1 7S LGP 0.875 22 1 7S LGP 1.00 25 1 8U 0.875 22 1 7A 0.875 22 1 7S 0.75 19 1 7A 0.625 16 1 MP 1.00 25 1 8SU 0.875 22 2 7U 1.00 25 1 8U 0.875 22 1 8U 0.875 22 1 8A 0.875 22 2 7SU 0.875 22 2 7SU 0.875 22 1 7SU 0.875 22 1 7SU,7S 0.875 22 1 8SU 0.875 22 1 7U 0.875 22 2 8SU 0.875 22 2 8U 0.875 22 1 7S 0.875 22 1 7U 0.875 22 1 0.875 22 1 0.875 22 1 0.75 19 1 7S 0.75 19 1 7S 0.875 22 1 8C 0.875 22 1 835,834,826

Bulldozers / Compactors BULLDOZERS L

L A

W D

C B T

L

L A

W

A

W D

TYPE 1

C B T

B

TYPE 2

C

A

W

D T TYPE 3

D

C B T TYPE 4

(Edges with offset bolt holes only)

CUTTING EDGE DIMENSIONS W in. mm 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 10 254 IRR

L in. 63.8 63.8 61.4 61.3 60.3 60.3 59.8 59.8 59.8 59.8 59.8 59.8 55.8 55.4 55.0 54.9 54.3 53.5 53.4 53.4 53.4 51.8 51.8 51.8 48.3 48.3 47.8 47.8 47.8 47.2 45.8 43.8 43.8 43.6 43.1 43.1 43.1 43.1 42.4 41.8 41.8 41.8 41.8 41.7 40.7 40.7

T

mm 1621 1621 1561 1558 1533 1532 1520 1520 1520 1520 1519 1519 1418 1408 1398 1394 1380 1359 1357 1357 1357 1316 1316 1316 1227 1227 1215 1215 1215 1200 1164 1122 1122 1108 1095 1095 1095 1095 1076 1062 1062 1062 1062 1058 1034 1034

Part in. mm No. 1.00 25 4T-2888 0.75 19 4T-2943 0.75 19 4T-2950 1.00 25 4T-6514 1.00 25 4T-3418 1.77 45 107-3476 1.77 45 107-3477 1.77 45 107-3478 1.00 25 4T-6513 1.00 25 4T-6531 1.00 25 4T-2863 0.75 19 4T-2949 1.00 25 4T-2862 1.00 25 4T-2889 1.38 35 6Y-5380 1.00 25 6Y-5379 0.75 19 106-0956 1.00 25 4T-2890 1.00 25 4T-3421 0.75 19 4T-2917 0.75 19 4T-2955 1.00 25 4T-2860 1.00 25 4T-6651 0.75 19 4T-2944 1.00 25 6Y-3840 0.75 19 9W-1878 1.77 45 107-3484 1.00 25 4T-2994 1.00 25 4T-3419 1.00 25 4T-6238 1.00 25 4T-6650 1.00 25 4T-2990 0.75 19 4T-2946 0.75 19 128-5883 1.77 45 107-3483 1.38 35 1U-4931 0.75 35 4T-3901 1.00 25 4T-3422 1.00 25 4T-8798 1.00 25 4T-2989 1.00 25 4T-2993 0.75 19 4T-2921 0.75 19 4T-2948 1.38 35 6Y-6351 1.77 45 107-3479 1.38 35 1U-4933

Dim A in. mm 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127

Dim B in. mm 1.9 49 1.9 49 3.7 95 3.7 93 3.2 81 3.1 80 2.9 74 2.9 74 2.9 74 2.9 74 1.9 49 1.9 49 1.9 49 3.7 95 3.5 89 3.4 87 3.4 87 2.8 70 2.7 69 2.7 69 2.7 69 1.9 49 1.9 49 1.9 49 3.4 87 3.4 87 2.9 74 2.9 74 1.9 49 2.6 67 1.9 49 3.9 99 3.9 99 3.8 97 3.5 90 3.5 90 3.5 90 3.5 90 3.2 81 2.9 74 2.9 74 2.9 74 2.9 74 2.8 72 2.4 60 2.4 60

Dim C in. mm 4.0 101.6 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 4.0 101.6 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4

Dim D No. of in. mm Holes 1.9 49 16 1.9 49 16 3.7 95 10 3.7 93 10 3.2 81 10 3.1 80 10 2.9 74 10 2.9 74 10 2.9 74 10 2.9 74 10 1.9 49 15 1.9 49 15 1.9 49 14 3.7 95 9 3.5 89 9 3.4 87 9 2.9 74 9 2.8 70 9 2.7 69 9 2.7 69 9 2.7 69 9 1.9 49 13 1.9 49 9 1.9 49 13 2.9 74 8 2.9 74 8 2.9 74 8 2.9 74 8 1.9 49 12 2.6 67 8 1.9 49 8 3.9 99 7 3.9 99 7 3.8 97 7 3.5 90 7 3.5 90 7 3.5 90 7 3.5 90 7 3.2 81 7 2.9 74 7 2.9 74 7 2.9 74 7 2.9 74 7 2.8 72 7 2.4 60 7 2.4 60 7

Bolt Dia. Edge Dozer in. mm Type Model 0.75 19 1 8A 0.75 19 1 8A 0.75 19 1 824 0.875 22 1 824S,834 0.875 22 1 8R,8S 0.875 22 1 8S,8R 0.875 22 1 8S 0.875 22 4 8U 0.875 22 4 8U 0.875 22 1 8S,824,825 0.75 19 1 7A 0.75 19 1 7A 0.75 19 1 8S 0.875 22 1 824C,834 0.875 22 1 D155A 0.875 22 1 D155A 0.75 19 2 6SU 0.75 19 2 7U 0.875 22 2 7U 0.875 22 2 7U 0.75 19 4 7U 0.75 19 1 8S 0.875 22 1 834 0.75 19 1 8S 0.75 19 2 6SU 0.75 19 4 6SU 1.00 25 1 8A 1.00 25 1 8A 0.75 19 2 8U 1.00 25 1 825C 0.875 22 1 834 0.75 19 1 7S 0.75 19 1 7S 0.875 22 1 7S LGP 1.00 25 1 8U 1.00 25 1 8U 0.875 22 1 7A 1.00 25 1 8U 0.875 22 1 834U 0.75 19 1 7A 0.875 22 1 814,7R 0.875 22 1 7S 0.75 19 1 7A 0.875 22 1 1D155SU&A 1.00 25 1 8A,8S 1.00 25 1 8A

Irregular hole spacing. Call (309) 675-6026 or (309) 675-4657 for details.

2-53

Bulldozers / Compactors BULLDOZERS L

L A

W D

C B T

L

L A

W

A

W D

C B T

TYPE 1

B

TYPE 2

C

A

W

D T TYPE 3

D

C B T TYPE 4

(Edges with offset bolt holes only)

CUTTING EDGE DIMENSIONS in. 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8

W mm 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 203 203 203 203 203 203 203 203 203 203 203

IRR

2-54

L in. 40.7 40.5 38.9 38.9 36.3 36.3 36.3 36.3 36.3 35.9 35.8 35.8 35.6 35.4 35.4 35.2 35.2 35.1 33.7 33.7 33.7 32.1 32.1 31.9 31.9 31.9 31.6 31.6 30.7 30.7 29.8 29.8 27.8 27.8 22.3 110.8 101.9 100.9 95.8 93.8 93.7 93.0 92.0 91.9 91.9 89.8

mm 1034 1029 988 988 923 923 923 922 922 913 910 910 905 900 899 894 894 890 856 856 856 817 817 810 810 810 802 802 780 779 758 758 707 707 567 2815 2587 2564 2434 2382 2381 2363 2337 2335 2334 2280

T in. 1.00 0.75 1.00 0.75 1.38 1.00 1.00 1.77 1.77 0.75 1.77 1.00 1.00 1.00 1.38 1.00 0.75 0.75 1.77 1.38 1.00 1.00 0.75 1.77 1.38 1.00 1.00 0.75 1.77 1.00 1.00 0.75 1.00 0.75 0.75 0.75 0.75 0.75 0.63 0.63 0.63 0.75 0.63 0.75 0.63 0.63

mm 25 19 25 19 35 25 25 45 45 19 45 25 25 25 35 25 19 19 45 35 25 25 19 45 35 25 25 19 45 25 25 19 25 19 19 19 19 19 16 16 16 19 16 19 16 16

Part No. 4T-2988 4T-2923 4T-8797 4T-7110 1U-4932 4T-2987 4T-6512 107-3475 107-3481 1U-1192 107-3474 4T-6532 4T-2861 6Y-5359 6Y-5374 122-9227 4T-5318 109-9093 107-3482 1U-4930 4T-3423 4T-3420 4T-2916 107-3480 1U-4929 4T-3417 4T-2985 4T-2952 107-3473 4T-2986 4T-2992 4T-2922 4T-2991 4T-2945 4T-7109 4T-3024 4T-8373 4T-8374 4T-2978 4T-8077 4T-8075 4T-8375 4T-8076 4T-3017 4T-2981 4T-8070

Dim A in. mm 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102

Irregular hole spacing. Call (309) 675-6026 or (309) 675-4657 for details.

Dim B in. mm 2.4 60 2.3 58 3.4 87 3.4 87 3.2 81 3.2 81 3.2 81 3.1 80 3.1 80 2.8 71 2.9 74 2.9 74 1.8 46 2.6 65 2.5 64 2.6 66 2.6 66 2.5 64 1.9 47 1.9 47 1.9 47 4.1 104 4.1 104 3.9 100 3.9 100 3.9 100 3.8 96 3.8 96 3.8 97 3.8 96 2.9 74 2.9 74 1.9 49 1.9 49 2.2 55 1.4 36 3.0 75 5.5 139 1.9 49 4.9 124 1.9 48 4.5 115 4.0 102 4.0 101 1.9 50 2.9 73

Dim C in. mm 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4

Dim D No. of in. mm Holes 2.4 60 7 2.3 58 7 5.5 139 6 5.5 139 6 3.2 81 6 3.2 81 6 3.2 81 6 3.1 80 6 3.1 80 6 3.1 80 6 2.9 74 6 2.9 74 6 1.8 46 9 2.9 73 6 2.9 73 6 2.6 66 6 2.6 66 6 2.5 64 6 1.9 47 6 1.9 47 6 1.9 47 6 4.1 104 5 4.1 104 5 3.9 100 5 3.9 100 5 3.9 100 5 3.8 96 5 3.8 96 5 2.9 74 5 2.9 74 5 2.9 74 5 2.9 74 5 1.9 49 5 1.9 49 5 2.2 55 5 1.4 36 28 3.0 75 17 5.5 139 16 1.9 49 24 4.9 124 15 1.9 48 16 4.5 115 15 4.0 102 15 4.0 101 15 1.9 50 23 2.9 73 15

Bolt Dia. Edge Dozer in. mm Type Model 1.00 25 1 8S,8A 0.875 22 1 816,814 0.875 22 2 834U 0.875 22 2 7U 1.00 25 1 8A 1.00 25 1 8U 0.875 22 1 8U 0.875 22 1 8U 1.00 25 1 8U,8A 0.875 22 2 7SU 0.875 22 1 8A,8U 0.875 22 1 8S,8U 0.75 19 1 824 0.875 22 2 D155U 0.875 22 2 D155U 0.875 22 1 824 0.875 22 1 7SU,7S 0.75 19 1 6A WIDE 1.00 25 1 8S 1.00 25 1 8S 1.00 25 1 8S 0.875 22 1 7U 0.875 22 1 7U 1.00 25 2 8SU,8U 1.00 25 2 8SU,8U 1.00 25 2 8SU,8U 0.75 19 1 7U 0.75 19 1 7U 1.00 25 2 8U 1.00 25 2 8U 0.875 22 1 7R,7S,814 0.875 22 1 7S,814 0.75 19 1 7S 0.75 19 1 7S 0.875 22 1 7U 0.625 16 1 5S (LGP) 0.625 16 1 0.75 19 1 0.625 16 1 5A,6A 0.625 16 1 0.625 16 1 0.75 19 1 0.625 16 1 0.75 19 1 6S 0.625 16 1 4A 0.75 19 1

Bulldozers / Compactors BULLDOZERS L

L A

W D

C B T

L

L A

W

A

W D

C B T

TYPE 1

B

TYPE 2

C

A

W

D T TYPE 3

D

C B T TYPE 4

(Edges with offset bolt holes only)

CUTTING EDGE DIMENSIONS in. 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 IRR

W mm 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203

L in. 89.0 87.8 87.8 87.8 87.8 86.3 86.0 83.8 81.2 79.8 77.7 72.0 71.8 71.8 67.8 66.5 64.8 63.7 61.3 59.9 59.9 59.8 58.9 56.7 55.3 54.9 53.4 51.9 47.8 47.0 45.8 45.4 43.8 43.0 42.4 42.1 41.5 41.4 41.4 41.1 40.1 40.1 39.7 39.1 39.1 37.8

mm 2260 2231 2231 2231 2231 2191 2184 2129 2061 2028 1975 1828 1824 1824 1723 1688 1647 1619 1558 1521 1521 1520 1496 1441 1405 1395 1357 1319 1215 1195 1164 1152 1113 1093 1079 1070 1054 1052 1052 1043 1019 1019 1009 992 992 961

T in. 0.63 0.75 0.75 0.63 0.63 0.63 0.63 0.75 0.63 0.63 0.63 0.63 0.75 0.63 0.75 0.63 0.63 0.75 0.75 0.63 0.63 0.75 0.75 0.75 0.75 0.75 0.63 0.75 0.75 0.63 0.75 0.75 0.75 0.75 0.63 0.75 0.63 1.00 0.75 0.75 1.00 0.75 0.75 0.75 0.63 0.75

Part mm No. 16 4T-8081 19 4T-3014 19 4T-3023 16 4T-2975 16 4T-2976 16 4T-8080 16 4T-8074 19 5R-8053 16 4T-8079 16 4T-2979 16 4T-8073 16 4T-8068 19 4T-3021 16 4T-2977 19 9W-8335 16 4T-8084 16 4T-8083 19 4T-3011 19 4T-2315 16 4T-2980 16 4T-8072 19 4T-3009 19 4T-3012 19 4T-3004 19 5A-8644 19 1U-2211 16 8E-7245 19 102-4580 19 4T-3030 16 4T-8940 19 4T-3008 19 3G-4282 19 4T-3025 19 5Q-5438 16 100-4578 19 3Y-0035 16 8E-9377 25 7T-9976 19 4T-6659 19 3G-6062 25 7T-9977 19 4T-6262 19 4T-3013 19 4T-3029 16 4T-2982 19 1U-2207

Dim A in. mm 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102

Dim B in. mm 5.5 140 1.9 49 1.9 49 1.9 49 1.9 49 4.1 105 4.0 102 1.9 49 4.6 117 3.9 100 2.9 73 3.0 76 1.9 49 1.9 49 3.9 100 3.2 82 2.4 62 1.9 48 3.7 93 1.9 50 3.0 75 2.9 74 2.4 62 4.4 111 1.4 36 3.5 88 2.7 69 5.0 126 1.9 49 2.5 64 2.9 74 4.7 119 3.9 100 3.3 84 3.2 83 3.1 78 2.8 70 2.7 69 2.7 69 2.5 65 2.1 52 2.1 52 1.9 48 1.5 39 1.5 39 3.9 100

Dim C in. mm 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 5.3 135.0 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4

Dim D No. of in. mm Holes 5.5 140 14 1.9 49 15 1.9 49 22 1.9 49 15 1.9 49 22 4.1 105 14 4.0 102 14 1.9 49 21 4.6 117 13 3.9 100 13 2.9 73 13 3.0 76 12 1.9 49 18 1.9 49 18 3.9 100 11 3.2 82 11 2.4 62 11 1.9 48 11 3.7 93 10 1.9 50 15 3.0 75 10 2.9 74 10 2.4 62 10 4.4 111 9 1.4 36 14 3.5 88 9 2.7 69 9 5.0 126 8 1.9 49 12 2.5 64 8 2.9 74 11 4.7 119 7 3.9 100 7 2.5 64 8 3.2 83 7 3.1 78 7 2.8 70 7 2.7 69 7 2.7 69 7 2.5 65 7 2.1 52 7 2.1 52 7 1.9 48 7 1.5 39 7 1.5 39 7 3.9 100 6

Bolt Dia. Edge Dozer in. mm Type Model 0.625 16 1 0.625 16 1 5S 0.625 16 1 6S 0.625 16 1 6S 0.625 16 1 6S 0.625 16 1 0.625 16 1 0.625 16 1 5S 0.625 16 1 0.625 16 1 4A 0.625 16 1 0.625 16 1 0.625 16 1 4S,6S 0.625 16 1 4S,4A,6S 0.75 19 1 0.625 16 1 0.625 16 1 0.75 19 1 6S 0.75 19 1 5A 0.625 16 1 4S 0.625 16 1 0.75 19 1 6A 0.75 19 1 815S 0.75 19 1 815F 0.625 16 1 5S 0.75 19 1 5S 0.75 19 1 525,515 0.75 19 1 5A 0.625 16 1 5A,6A 0.75 19 1 4A,4S 0.625 16 1 5A,6A,815F 0.75 19 1 5P 0.625 16 1 5S 0.75 19 1 0.75 19 1 4A 0.75 19 1 4A 0.75 19 1 4P XL 0.75 19 1 6S 0.75 19 1 5SU 0.75 19 1 5S 0.75 19 1 6A 0.75 19 1 6A 0.75 19 1 6S 0.625 16 1 4S 0.625 16 1 4S 0.75 19 1 5A

Irregular hole spacing. Call (309) 675-6026 or (309) 675-4657 for details.

2-55

Bulldozers / Compactors BULLDOZERS L

L A

W D

C B T

A

W D

TYPE 1

L

L A

W

C B T

B

TYPE 2

C

D T

A

W D

TYPE 3

C B T TYPE 4

(Edges with offset bolt holes only)

CUTTING EDGE DIMENSIONS W in. mm 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6.5 165 6 152 IRR

2-56

L in. 36.0 35.5 34.8 33.8 33.8 33.8 33.8 32.2 31.8 31.8 26.5 26.5 25.9 25.9 24.7 24.6 23.1 21.8 15.1 15.1 51.5 49.9 48.6 47.7 41.8 39.7 38.4 35.9 34.2 55.7

T

mm 914 902 884 859 859 859 858 818 808 808 674 674 658 658 627 624 586 554 383 383 1309 1267 1236 1213 1062 1008 976 912 869 1416

Part in. mm No. 0.63 16 140-0983 0.75 19 3Y-0036 0.63 16 3G-9306 0.75 19 4T-3005 0.75 19 4T-3020 0.63 16 4T-2973 0.63 16 4T-3720 0.75 19 4T-0731 0.75 19 4T-3006 0.63 16 4T-2974 0.75 19 4T-3028 0.63 16 4T-2972 1.00 25 7T-9978 0.75 19 4T-3010 0.75 19 9U-8057 0.63 16 8A-8580 0.63 16 8A-8581 0.75 19 4T-3026 0.75 19 4T-3027 0.63 16 4T-2983 0.63 16 141-2238 0.63 16 6Y-5842 0.63 16 141-0413 0.63 16 4T-6232 0.63 16 4T-6231 0.63 16 140-2187 0.63 16 104-9634 0.63 16 6Y-5841 0.63 16 4T-6230 0.63 16 5F3102

Dim A in. mm 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 4.0 102 3.3 83 3.3 83 3.3 83 3.3 83 3.3 83 3.3 83 3.3 83 3.3 83 3.3 83 3.0 76

Irregular hole spacing. Call (309) 675-6026 or (309) 675-4657 for details.

Dim B in. mm 3.0 76 2.8 70 2.4 61 1.9 49 0.9 23 1.9 49 1.9 48 4.1 104 3.9 99 3.9 99 4.3 109 4.3 109 4.0 101 4.0 101 3.3 85 3.3 83 2.5 64 1.9 49 1.5 39 1.5 39 4.8 121 3.9 100 3.3 84 2.9 73 2.9 74 4.9 123 4.2 107 3.0 75 2.1 54 1.9 48

Dim C in. mm 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 4.0 101.6

Dim D No. of in. mm Holes 3.0 76 6 2.8 70 6 2.4 61 6 1.9 49 6 0.9 23 9 1.9 49 6 1.9 48 6 4.1 104 5 3.9 99 5 3.9 99 5 4.3 109 4 4.3 109 4 4.0 101 4 4.0 101 4 3.3 85 4 3.3 83 4 2.5 64 4 1.9 49 4 1.5 39 3 1.5 39 3 4.8 121 8 3.9 100 8 3.3 84 8 2.9 73 8 2.9 74 7 4.9 123 6 4.2 107 6 3.0 75 6 2.1 54 6 1.9 48 14

Bolt Dia. Edge Dozer in. mm Type Model 0.75 19 1 5P 0.75 19 1 0.75 19 1 5P 0.625 16 1 4A 0.625 16 1 5A,6A,815F 0.625 16 1 4A 0.75 19 1 4S 0.75 19 1 5S 0.625 16 1 4A 0.625 16 1 4A 0.625 16 1 5S,4S 0.625 16 1 5S,4S 0.75 19 1 6S 0.75 19 1 6S 0.75 19 1 5SU 0.625 16 1 4S 0.625 16 1 4S 0.625 16 1 5S 0.625 16 1 4S,5S 0.625 16 1 4S,5S 0.625 16 1 4P 0.625 16 1 5P,4P 0.625 16 1 3P 0.625 16 1 4P 0.625 16 1 3S 0.625 16 1 4P 0.625 16 1 4P 0.625 16 1 4P 0.625 16 1 3P,3A 0.625 16 1 D2

Bulldozers / Compactors BULLDOZER END BITS CONVERSION PROCEDURE

End Bits Conversion Procedure Converting competitive machines to use Cat end bits is somewhat more difficult than converting them to use cutting edges. End bit bolt hole patterns vary widely between machines and competitors. As a result, most end bit conversions involve modifying the competitive dozer end bit support. Before modifying, always check the bolt hole pattern; it might be similar to an available end bit. The charts list the end bits based on their compatibility with the various edge widths. Try to find an end bit that will bolt up with no modification. If none can be found, select any end bit from the chart. Then plug weld and drill the support to match the hole pattern in the Cat end bit. It is possible to install Cat end bits on competitive dozers by replacing the end bit supports. The end bit support is the heavy piece of steel below the moldboard to which the end bit is bolted. The competitive support must be cut out and the support welded in its place. All gussets and structural supports removed must be replaced. Use E7018 welding rod or an equivalent for all welding. Cat part numbers for end bit supports and various edge widths are shown in the following chart.

End Bit Support 9J-6977 4T-9579 3G-6415

Cutting Edge Widths

End Bits (R-L)

16" 13" 16" 13" 13" 10"

8E-4541/2, 7T-4689-8 3G-7763-4, 1U-1545-6 7T-4094-5 3G-8283-4, 3G-8291-2, 4J-8723-4 7T-4091-90 3G-8287-8, 3G-8317-8, 9J-1477-8, 4T-8089-90

2-57

Bulldozers / Compactors DIMENSIONS — BULLDOZER END BITS

Bulldozer End Bits The following illustrations show the different types of bolt hole patterns. In the following charts, the type is coded to better describe the end bit. The key to the code is in the following example:

L1 C D E F G A W1

W2

Type

L2

W1

D

E

B

W2 G

H

I L2

TYPE 2

L1 A W1

C

D

E

H

I

The illustration to be used for the bolt hole pattern.

B

W2 G

J

L2 TYPE 3

L1 A W1

C

D

E

F

G

H

I

J

B

W2 L2 TYPE 4

2-58

L

This describes the shape of the end bit. If there is no letter, the geometry is the one in the illustration. Key to letters: E = Extended Wear Life End Bit F = Finishing End Bit G = General Duty End Bit H = Hot Cupped End Bit (an old design)

L1 C

E

L stands for left side and R means right side end bit.

TYPE 1

A

2

K

W1

13.50 (343.0) 13.50 (343.0) 14.17 (360.0) 14.17 (360.0) 14.60 (371.0) 14.60 (371.0) 16.22 (412.0) 16.22 (412.0) 15.82 (402.0) 15.82 (402.0) 15.82 (402.0) 15.82 (402.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 14.65 (372.0) 14.65 (372.0) 13.78 (350.0) 13.78 (350.0) 13.46 (342.0)

Width

15.98 (406.0) 15.98 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.9 (406.0) 15.74 (400.0)

3HR

3ER

3EL

5GR

5GL

3UL

3UR

3UL

3UR

3ER

3EL

4GL

4GR

3EL

3ER

4UL

4UR

4UR

4UL

3ER

3EL

0.98 (25.0) 0.98 (25.0) 1.125 (36.5) 1.125 (36.5) 1.125 (36.5) 1.125 (36.5) 1.25 (32.0) 1.25 (32.0) 1.25 (32.0) 1.25 (32.0) 1.25 (32.0) 1.25 (32.0) 1.25 (32.0) 1.25 (32.0) 1.25 (32.0) 0.98 (25.0) 1.25 (32.0) 1.25 (32.0) 0.98 (25.0) 0.98 (25.0) 1.25 (32.0)

Bolt Type Size

2.36 (60.0) 2.36 (60.0) 3.35 (85.0) 3.35 (85.0) 2.76 (70.0) 2.76 (70.0) 2.76 (70.0) 2.76 (70.0) 1.77 (45.0) 1.77 (45.0) 2.36 (60.0) 2.36 (60.0) 2.17 (55.0) 2.17 (55.0) 2.76 (70.0) 2.76 (70.0) 2.36 (60.0) 7T-4688

7T-4095

7T-4094

8E-4199

8E-4198

100-3134

100-3133

100-3132

100-3131

8E-4543

8E-4542

8E-4544

8E-4543

8E-4546

8E-4545

8E-9786

8E-9785

8E-9749

2.76 7T-4092 (70.0) 2.76 7T-4093 (70.0) 8E-9748

Part Thick Number 2.65 (67.4) 2.65 (67.4) 2.48 (63.0) 2.48 (63.0) 2.48 (63.0) 2.48 (63.0) 2.05 (52.0) 2.05 (52.0) 2.05 (52.0) 2.05 (52.0) 2.05 (52.0) 2.05 (52.0) 3.81 (97.0) 3.81 (97.0) 3.81 (97.0) 3.81 (97.0) 2.05 (52.0) 2.05 (52.0) 2.65 (67.4) 2.65 (67.4) 2.05 (52.0)

A 3.25 (82.6) 3.25 (82.6) 4.25 (108.0) 4.25 (108.0) 4.25 (108.0) 4.25 (108.0) 4.25 (108.0) 4.25 (108.0) 4.25 (108.0) 4.25 (108.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.25 (82.6) 3.25 (82.6) 3.94 (100.0)

B 6.94 (176.3) 6.94 (176.3) 2.01 (51.0) 2.01 (51.0) 2.01 (51.0) 2.01 (51.0) 2.01 (51.0) 2.01 (51.0) 2.01 (51.0) 2.01 (51.0) 3.11 (79.0) 3.11 (79.0) 3.11 (79.0) 3.11 (79.0) 3.11 (79.0) 3.11 (79.0) 3.11 (79.0) 3.11 (79.0) 3.69 (93.8) 3.69 (93.8) 3.11 (79.0)

C 4.00 (101.6) 4.00 (101.6) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 7.09 (180.0) 7.09 (180.0) 7.08 (180.0) 7.08 (180.0) 7.08 (180.0) 7.08 (180.0) 7.09 (180.0) 7.09 (180.0) 4.00 (101.6) 4.00 (101.6) 7.08 (180.0)

D 4.00 (101.6) 4.00 (101.6) 9.29 (236.0) 9.29 (236.0) 9.29 (236.0) 9.29 (236.0) 9.29 (236.0) 9.29 (236.0) 9.29 (236.0) 9.29 (236.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 4.00 (101.6) 4.00 (101.6) 2.95 (75.0)

E

2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0)

F 2.44 (62.0) 2.44 (62.0) 2.97 (75.5) 2.97 (75.5) 2.97 (75.5) 2.97 (75.5) 2.97 (75.5) 2.97 (75.5) 2.97 (75.5) 2.97 (75.5) 2.01 (51.0) 2.01 (51.0) 2.00 (51.0) 2.00 (51.0) 2.00 (51.0) 2.00 (51.0) 2.01 (51.0) 2.01 (51.0) 2.44 (62.0) 2.44 (62.0) 2.01 (51.0)

G

BULLDOZER END BIT DIMENSIONS

3.25 (82.6) 3.25 (82.6) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 3.25 (82.6) 3.25 (82.6) 4.96 (126.0)

H 6.50 (165.1) 6.50 (165.1) 7.64 (194.0) 7.64 (194.0) 7.64 (194.0) 7.64 (194.0) 7.64 (194.0) 7.64 (194.0) 7.64 (194.0) 7.64 (194.0) 7.09 (180.0) 7.09 (180.0) 7.08 (180.0) 7.08 (180.0) 7.08 (180.0) 7.08 (180.0) 7.09 (180.0) 7.09 (180.0) 3.25 (82.6) 3.25 (82.6) 7.08 (180.0)

I 3.25 (82.5) 3.25 (82.5) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 3.25 (82.5) 3.25 (82.5) 2.95 (75.0)

J

2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0)

K 20.55 (522.0) 20.55 (522.0) 25.70 (653.0) 25.70 (653.0) 25.53 (648.5) 25.53 (648.5) 25.43 (646.0) 25.43 (646.0) 25.39 (645.0) 25.39 (645.0) 22.71 (577.0) 22.71 (577.0) 22.49 (571.5) 22.49 (571.5) 22.49 (571.5) 22.49 (571.5) 21.50 (546.0) 21.50 (546.0) 17.72 (450.0) 17.72 (450.0) 19.99 (508.0)

L1 27.64 (702.0) 27.64 (702.0) 30.31 (770.0) 30.31 (770.0) 30.31 (770.0) 30.31 (770.0) 32.32 (821.0) 32.32 (821.0) 33.84 (859.5) 33.84 (859.5) 28.42 (722.0) 28.42 (722.0) 27.04 (687.0) 27.04 (687.0) 27.04 (687.0) 27.04 (687.0) 28.70 (729.0) 28.70 (729.0) 24.80 (630.0) 24.80 (630.0) 27.20 (691.0)

L2

18.56 (471.5) 18.56 (471.5) 15.55 (395.0) 15.55 (395.0) 15.59 (396.0) 15.59 (396.0) 20.37 (517.5) 20.37 (517.5) 21.06 (535.0) 21.06 (535.0) 18.42 (468.0) 18.42 (468.0) 15.98 (406.0) 15.98 (406.0) 15.98 (406.0) 15.98 (406.0) 19.17 (487.0) 19.17 (487.0) 18.56 (471.5) 18.56 (471.5) 17.79 (452.0)

W2

Bulldozers / Compactors

DIMENSIONS — BULLDOZER END BITS

2-59

2-60

W1

13.46 (342.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.40 (315.0) 12.44 (316.0) 12.44 (316.0) 12.44 (316.0) 12.44 (316.0) 12.75 (324.0) 12.75 (324.0) 12.75 (324.0) 12.75 (324.0) 12.24 (310.9) 12.24 (310.9) 13.18 (335.0) 13.18 (335.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0)

Width

15.74 (400.0) 13.14 (334.0) 13.14 (334.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0)

3UL

3UR

3UL

3UR

3EL

3ER

3IL

3IR

3HL

3HR

3HL

3HR

3HL

3HR

3UL

3UR

3G

1F

3FL

3FR

3HL

1.25 (32.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 1.25 (32.0) 1.25 (32.0) 1.25 (32.0) 1.25 (32.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0)

Bolt Type Size 2.36 (60.0) 1.57 (40.0) 1.57 (40.0) 1.12 (28.5) 1.97 (50.0) 1.375 (35.0) 1.375 (35.0) 1.57 (40.0) 1.57 (40.0) 1.57 (40.0) 1.57 (40.0) 1.38 (35.0) 1.38 (35.0) 1.24 (31.5) 1.24 (31.5) 2.56 (65.0) 2.56 (65.0) 1.77 (45.0) 1.77 (45.0) 2.36 (60.0) 2.36 (60.0) 100-3138

100-3137

100-3136

100-3135

8E-4540

8E-4539

5J-1280

5J-1279

3G-8290

3G-8289

3G-8282

3G-8281

1U-1546

1U-1545

3G-7764

3G-7763

9W-9193

4T-6389

6Y-4278

6Y-4277

7T-4689

Part Thick Number 2.05 (52.0) 3.20 (81.4) 3.20 (81.4) 6.50 (165.0) 1.87 (47.4) 2.05 (52.0) 2.05 (52.0) 2.05 (52.0) 2.05 (52.0) 2.73 (69.5) 2.73 (69.5) 2.73 (69.5) 2.73 (69.5) 2.75 (70.1) 2.75 (70.1) 1.75 (44.4) 1.75 (44.4) 3.12 (79.4) 3.12 (79.4) 3.12 (79.4) 3.12 (79.4)

A

3.25 (82.6) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.24 (82.3) 3.24 (82.3) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6)

3.94 (100.0) 3.25 (82.6) 3.25 (82.6)

B 3.11 (79.0) 3.69 (93.8) 3.69 (93.8) 4.82 (122.5) 6.94 (176.3) 3.11 (79.0) 3.11 (79.0) 3.11 (79.0) 3.11 (79.0) 6.94 (176.5) 6.94 (176.5) 6.94 (176.5) 6.94 (176.5) 6.94 (176.3) 6.94 (176.3) 3.61 (91.8) 3.61 (91.8) 3.61 (91.8) 3.61 (91.8) 3.61 (91.8) 3.61 (91.8)

C 7.08 (180.0) 4.00 (101.6) 4.00 (101.6) 3.00 (76.2) 4.00 (101.6) 7.09 (180.0) 7.09 (180.0) 7.09 (180.0) 7.09 (180.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

D 2.95 (75.0) 4.00 (101.6) 4.00 (101.6) 3.76 (95.5) 4.00 (101.6) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

E

3.76 (95.5)

F

G

H

3.25 (82.6) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.24 (82.3) 3.24 (82.3) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6)

4.96 (126.0) 3.25 (82.6) 3.25 (82.6)

continued

2.01 (51.0) 2.44 (62.0) 2.44 (62.0) 3.00 (76.2) 2.44 (62.0) 2.01 (51.0) 2.01 (51.0) 2.01 (51.0) 2.01 (51.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.40 (60.0) 2.40 (60.0) 2.36 (60.0) 2.36 (60.0) 2.36 (60.0) 2.36 (60.0)

BULLDOZER END BIT DIMENSIONS

6.49 (165.1) 7.09 (180.0) 7.09 (180.0) 7.09 (180.0) 7.09 (180.0) 6.50 (165.2) 6.50 (165.2) 6.50 (165.2) 6.50 (165.2) 6.51 (165.6) 6.51 (165.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6)

7.08 (180.0) 3.25 (82.6) 3.25 (82.6)

I

3.25 (82.5) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.24 (82.3) 3.24 (82.3) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5)

2.95 (75.0) 3.25 (82.5) 3.25 (82.5)

J

K 19.99 (508.0) 17.51 (445.0) 17.51 (445.0) 23.17 (588.4) 21.50 (546.0) 20.94 (532.0) 20.94 (532.0) 20.47 (520.0) 20.47 (520.0) 19.99 (508.0) 19.99 (508.0) 19.99 (508.0) 19.99 (508.0) 19.38 (492.3) 19.38 (492.3) 19.13 (486.0) 19.13 (486.0) 19.09 (485.0) 19.09 (485.0) 19.09 (485.0) 19.09 (485.0)

L1 27.20 (691.0) 23.30 (592.0) 23.30 (592.0) 23.17 (588.4) 27.59 (701.0) 24.02 (610.0) 24.02 (610.0) 26.65 (677.0) 26.65 (677.0) 26.81 (681.0) 26.81 (681.0) 26.81 (681.0) 26.81 (681.0) 22.99 (584.2) 22.99 (584.2) 23.89 (607.0) 23.89 (607.0) 22.90 (581.7) 22.90 (581.7) 22.90 (581.7) 22.90 (581.7)

L2 17.79 (452.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 16.38 (416.0) 14.25 (362.0) 14.25 (362.0) 14.25 (362.0) 14.25 (362.0) 15.70 (399.0) 15.70 (399.0) 15.70 (399.0) 15.70 (399.0) 13.75 (349.5) 13.75 (349.5) 15.47 (393.0) 15.47 (393.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0)

W2

Bulldozers / Compactors DIMENSIONS — BULLDOZER END BITS

W1

12.99 (330.0) 12.99 (330.0) 12.79 (325.0) 12.79 (325.0) 12.16 (309.0) 12.16 (309.0) 12.99 (330.0) 12.99 (330.0) 12.48 (317.0) 12.48 (317.0) 12.48 (317.0) 12.48 (317.0) 12.18 (309.6) 12.18 (309.6) 12.99 (330.0) 12.99 (330.0) 11.61 (295.0) 11.61 (295.0) 11.61 (295.0) 11.61 (295.0) 10.62 (270.0)

Width

12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 12.99 (330.0) 11.00 (280.0)

3UL

3ER

3EL

3ER

3EL

2FL

2FR

3IL

3IR

3HL

3HR

3HL

3HR

3FL

3FR

3GR

3GL

3EL

3ER

3UL

3UR

0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.875 (22.0)

Bolt Type Size 1.97 (50.0) 1.97 (50.0) 2.17 (55.0) 2.17 (55.0) 1.97 (50.0) 1.97 (50.0) 1.12 (28.5) 1.12 (28.5) 1.57 (40.0) 1.57 (40.0) 1.38 (35.0) 1.38 (35.0) 1.25 (32.0) 1.25 (32.0) 1.38 (35.0) 1.38 (35.0) 2.56 (65.0) 2.56 (65.0) 2.56 (65.0) 2.56 (65.0) 1.38 (35.0) 105-0574

7T-4089

7T-4088

7T-4091

7T-4090

135-9699

135-9698

4T-8724

4T-8723

3G-8292

3G-8291

3G-8284

3G-8283

4T-6392

4T-6391

8E-4197

8E-4196

8E-4538

8E-4532

100-3140

100-3139

Part Thick Number 3.00 (76.4) 3.00 (76.4) 1.66 (42.4) 1.66 (42.4) 1.75 (44.4) 1.73 (44.0) 3.25 (82.5) 3.25 (82.5) 2.73 (69.5) 2.73 (69.5) 2.73 (69.5) 2.73 (69.5) 2.75 (70.1) 2.75 (70.1) 3.20 (81.5) 3.20 (81.5) 1.67 (42.4) 1.67 (42.4) 1.67 (42.4) 1.67 (42.4) 1.86 (47.4)

A 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.5) 3.25 (82.5) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6)

B 3.69 (93.8) 3.69 (93.8) 3.69 (93.8) 3.69 (93.8) 3.61 (91.8) 3.61 (91.8) 6.94 (176.3) 6.94 (176.3) 3.70 (94.0) 3.70 (94.0) 3.70 (94.0) 3.70 (94.0) 3.68 (93.7) 3.68 (93.7) 2.02 (51.4) 2.02 (51.4) 2.99 (76.0) 2.99 (76.0) 2.44 (62.0) 2.44 (62.0) 2.95 (75.0)

C 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.99 (127.0) 4.99 (127.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

D 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 5.99 (152.4) 5.99 (152.4) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

E

F

G

H 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.6) 3.25 (82.6) 5.99 (152.4) 5.99 (152.4) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

continued

2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.40 (60.0) 2.40 (60.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.89 (73.5) 2.89 (73.5) 2.99 (76.0) 2.99 (76.0) 2.44 (62.0) 2.44 (62.0) 2.95 (75.0)

BULLDOZER END BIT DIMENSIONS

3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 6.50 (165.2) 6.50 (165.2) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 5.99 (152.4) 5.99 (152.4) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

I

3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5)

J

K 18.18 (462.0) 18.18 (462.0) 17.95 (456.0) 17.95 (456.0) 17.55 (446.0) 17.55 (446.0) 17.40 (442.2) 17.40 (442.2) 17.36 (441.0) 17.36 (441.0) 17.36 (441.0) 17.36 (441.0) 17.25 (438.2) 17.25 (438.2) 17.18 (436.4) 17.18 (436.4) 15.71 (399.0) 15.71 (399.0) 15.16 (385.0) 15.16 (385.0) 17.01 (432.0)

L1 21.90 (556.5) 21.90 (556.5) 22.40 (569.0) 22.40 (569.0) 23.03 (585.0) 23.03 (585.0) 19.94 (506.7) 19.94 (506.7) 22.95 (583.0) 22.95 (583.0) 22.95 (583.0) 22.95 (583.0) 20.81 (528.6) 20.81 (528.6) 21.99 (558.8) 21.99 (558.8) 20.51 (521.0) 20.51 (521.0) 19.96 (507.0) 19.96 (507.0) 18.58 (472.0)

L2

12.99 (330.0) 12.99 (330.0) 14.96 (380.0) 14.96 (380.0) 16.06 (408.0) 16.06 (408.0) 12.99 (330.0) 12.99 (330.0) 14.48 (368.0) 14.48 (368.0) 14.48 (368.0) 14.48 (368.0) 13.75 (349.5) 13.75 (349.5) 12.99 (330.0) 12.99 (330.0) 15.16 (385.0) 15.16 (385.0) 15.16 (385.0) 15.16 (385.0) 11.51 (292.5)

W2

Bulldozers / Compactors

DIMENSIONS — BULLDOZER END BITS

2-61

2-62

W1

10.62 (270.0) 10.62 (270.0) 10.62 (270.0) 10.79 (274.0) 10.79 (274.0) 10.90 (277.0) 10.90 (277.0) 10.98 (279.0) 10.98 (279.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0)

Width

11.00 (280.0) 11.00 (280.0) 11.00 (280.0) 11.00 (280.0) 11.00 (280.0) 11.00 (280.0) 11.00 (280.0) 11.00 (280.0) 11.00 (280.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0)

3UR 0.875 (22.0) 3UL 0.875 (22.0) 3UR 0.875 (22.0) 3GL 0.875 (22.0) 3GR 0.875 (22.0) 3GR 0.98 (25.0) 3GL 0.98 (25.0) 3GR 0.98 (25.0) 3GL 0.98 (25.0) 3FR 0.875 (22.0) 3FL 0.875 (22.0) 3FR 0.875 (22.0) 3FL 0.875 (22.0) 3HR 0.875 (22.0) 3HL 0.875 (22.0) 3HR 0.98 (25.0) 3HL 0.98 (25.0) 3HR 0.875 (22.0) 3HL 0.875 (22.0) 3HR 0.875 (22.0) 3HL 0.875 (22.0)

Bolt Type Size 1.38 (35.0) 1.77 (45.0) 1.77 (45.0) 1.38 (35.0) 1.38 (35.0) 1.97 (50.0) 1.97 (50.0) 1.97 (50.0) 1.97 (50.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 1.57 (40.0) 1.57 (40.0) 1.57 (40.0) 1.57 (40.0) 0.875 (22.0) 0.875 (22.0) 1.18 (30.0) 1.18 (30.0) 3G-8316

3G-8315

3G-8294

3G-8293

3G-8288

3G-8287

3G-8286

3G-8285

4T-6242

4T-6241

4T-6506

4T-6505

9W-8652

9W-8651

9W-8654

9W-8653

9W-6199

9W-6198

105-0577

105-0576

105-0575

Part Thick Number 1.86 (47.4) 1.86 (47.4) 1.86 (47.4) 1.63 (41.4) 1.63 (41.4) 1.75 (44.4) 1.75 (44.4) 1.75 (44.4) 1.75 (44.4) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5)

A 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6)

B 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.44 (62.0) 2.44 (62.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0)

C 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

D 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

E

F

G

H 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

continued

2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.44 (62.0) 2.44 (62.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0)

BULLDOZER END BIT DIMENSIONS

3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

I 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

J

K 17.01 (432.0) 17.01 (432.0) 17.01 (432.0) 16.93 (430.0) 16.93 (430.0) 16.41 (417.0) 16.41 (417.0) 16.02 (407.0) 16.02 (407.0) 17.01 (432.0) 17.01 (432.0) 16.11 (409.1) 16.11 (409.1) 16.02 (407.0) 16.02 (407.0) 16.02 (407.0) 16.02 (407.0) 16.02 (407.0) 16.02 (407.0) 16.02 (407.0) 16.02 (407.0)

L1 18.58 (472.0) 18.58 (472.0) 18.58 (472.0) 23.62 (600.0) 23.62 (600.0) 21.41 (544.0) 21.41 (544.0) 20.94 (532.0) 20.94 (532.0) 18.58 (472.0) 18.58 (472.0) 16.11 (409.1) 16.11 (409.1) 20.90 (531.0) 20.90 (531.0) 20.90 (531.0) 20.90 (531.0) 20.90 (531.0) 20.90 (531.0) 20.90 (531.0) 20.90 (531.0)

L2 11.51 (292.5) 11.51 (292.5) 11.51 (292.5) 14.01 (356.0) 14.01 (356.0) 14.54 (369.5) 14.54 (369.5) 14.54 (369.5) 14.54 (369.5) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 11.53 (293.0) 11.53 (293.0) 11.53 (293.0) 11.53 (293.0) 11.53 (293.0) 11.53 (293.0) 11.53 (293.0) 11.53 (293.0)

W2

Bulldozers / Compactors DIMENSIONS — BULLDOZER END BITS

W1

10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 0.875 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0)

Width

10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0)

3FR

3HL

3HR

3HL

3HR

3HL

3HR

3IL

3IR

3IL

3IR

3FR

3FL

3FL

3FR

3FL

3FR

3FL

3FR

3HL

3HR

0.98 (25.0) 0.98 (25.0) 0.875 (22.0) 0.98 (22.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.875 (22.0) 0.875 (22.0) 0.98 (25.0) 0.98 (25.0) 0.875 (22.0) 0.875 (22.0) 0.875 (22.0) 0.875 (22.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.75 (19.0)

Bolt Type Size 1.18 (30.0) 1.18 (30.0) 0.98 (25.0) 1.75 (25.0) 0.98 (25.0) 0.98 (25.0) 1.18 (30.0) 1.18 (30.0) 1.38 (35.0) 1.38 (35.0) 1.10 (28.0) 1.10 (28.0) 1.10 (28.0) 1.10 (28.0) 1.57 (40.0) 1.57 (40.0) 1.57 (40.0) 1.57 (40.0) 1.18 (30.0) 1.18 (30.0) 0.98 (25.0) 4T-6671

3G-8302

3G-8301

3G-8280

3G-8279

3G-8278

3G-8277

4J-8854

4J-8843

9J-1478

9J-1477

8E-9545

8E-9544

4T-8090

4T-8089

4T-6240

4T-6239

4T-6504

4T-6503

3G-8318

3G-8317

Part Thick Number 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.77 (45.1) 1.77 (45.1) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5)

A 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.18 (81.0) 3.18 (81.0) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6)

B 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.93 (74.5) 2.93 (74.5) 1.45 (37.0) 1.45 (37.0) 2.94 (74.7) 2.94 (74.7) 2.94 (74.7) 2.94 (74.7) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 1.95 (49.5)

C 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 2.37 (60.3) 2.37 (60.3) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

D 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 5.31 (135.0) 5.31 (135.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

E

F

G

H 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 2.37 (60.3) 2.37 (60.3) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 4.00 (101.6)

continued

2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.95 (75.0) 2.93 (74.5) 2.93 (74.5) 1.45 (37.0) 1.45 (37.0) 2.94 (74.7) 2.94 (74.7) 2.94 (74.7) 2.94 (74.7) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 1.95 (49.5)

BULLDOZER END BIT DIMENSIONS

3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 4.12 (104.8) 4.12 (104.8) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 4.00 (101.6)

I 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 2.37 (60.3) 2.37 (60.3) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 1.99 (50.8)

J

K 16.02 (407.0) 16.02 (407.0) 16.01 (406.6) 16.01 (406.6) 15.99 (406.4) 15.99 (406.4) 15.98 (406.0) 15.98 (406.0) 15.82 (402.0) 15.82 (402.0) 15.74 (400.0) 15.74 (400.0) 15.72 (399.5) 15.72 (399.5) 15.59 (396.0) 15.59 (396.0) 15.59 (396.0) 15.59 (396.0) 15.59 (396.0) 15.59 (396.0) 15.31 (388.9)

L1 20.90 (531.0) 20.90 (531.0) 18.00 (457.2) 18.00 (457.2) 19.17 (487.1) 19.17 (487.1) 19.17 (487.0) 19.17 (487.0) 19.96 (507.0) 19.96 (507.0) 18.94 (481.1) 18.94 (481.1) 19.29 (490.0) 19.29 (490.0) 19.84 (504.0) 19.84 (504.0) 19.84 (504.0) 19.84 (504.0) 19.84 (504.0) 19.84 (504.0) 16.06 (407.9)

L2

11.53 (293.0) 11.53 (293.0) 10.00 (254.0) 10.00 (254.0) 9.99 (254.0) 9.99 (254.0) 9.99 (254.0) 9.99 (254.0) 10.00 (254.0) 10.00 (254.0) 11.55 (293.6) 11.55 (293.6) 11.63 (295.5) 11.63 (295.5) 11.41 (290.0) 11.41 (290.0) 11.41 (290.0) 11.41 (290.0) 11.41 (290.0) 11.41 (290.0) 10.00 (254.0)

W2

Bulldozers / Compactors

DIMENSIONS — BULLDOZER END BITS

2-63

2-64

W1

10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.11 (257.0) 10.11 (257.0) 9.31 (236.5) 9.31 (236.5) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 8.52 (216.5) 8.52 (216.5) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0)

Width

10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0)

3FL

3FR

3H

3H

2UR

2UL

2FL

2FR

2EL

2ER

3HL

3HR

3HL

3HR

2GR

2GL

3IL

3IR

3IL

3IR

3FL

0.75 (19.0) 0.875 (22.0) 0.875 (22.0) 0.98 (25.0) 0.98 (25.0) 0.75 (19.0) 0.75 (19.0) 0.875 (22.0) 0.875 (22.0) 0.875 (22.0) 0.875 (22.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0)

Bolt Type Size 0.98 (25.0) 1.10 (28.0) 1.10 (28.0) 1.10 (28.0) 1.10 (28.0) 1.18 (30.0) 1.18 (30.0) 1.38 (35.0) 1.38 (35.0) 2.00 (50.0) 2.00 (50.0) 1.18 (30.0) 1.18 (30.0) 0.98 (25.0) 0.98 (25.0) 1.38 (35.0) 1.38 (35.0) 1.00 (25.4) 1.00 (25.4) 0.98 (25.0) 0.98 (25.0) 4T-6668

4T-6667

3J-2466

3J-2465

122-8618

122-8617

9W-8875

9W-8874

9W-1876

9W-1875

6Y-5378

6Y-5377

6Y-5376

6Y-5375

6Y-4411

6Y-4410

9J-1480

9J-1479

4J-8850

4J-8849

4T-6672

Part Thick Number 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.30 (33.0) 1.30 (33.0) 1.55 (39.5) 1.55 (39.5) 1.55 (39.5) 1.55 (39.5) 0.98 (25.0) 0.98 (25.0) 2.46 (62.6) 2.46 (62.6) 2.46 (62.6) 2.46 (62.6) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5)

A 3.25 (82.6) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5) 2.50 (63.5) 2.50 (63.5) 3.18 (81.0) 3.18 (81.0) 3.18 (81.0) 3.18 (81.0) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6)

B 1.95 (49.5) 2.44 (62.0) 2.44 (62.0) 2.43 (61.9) 2.43 (61.9) 2.24 (57.0) 2.24 (57.0) 1.45 (37.0) 1.45 (37.0) 1.45 (37.0) 1.45 (37.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 1.94 (49.3) 1.94 (49.3) 1.95 (49.5) 1.95 (49.5)

C 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.19 (81.0) 3.19 (81.0) 2.37 (60.3) 2.37 (60.3) 2.37 (60.3) 2.37 (60.3) 3.18 (81.0) 3.18 (81.0) 3.19 (81.0) 3.19 (81.0) 3.18 (81.0) 3.18 (81.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

D 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.19 (81.0) 3.19 (81.0) 5.31 (135.0) 5.31 (135.0) 5.31 (135.0) 5.31 (135.0) 3.18 (81.0) 3.18 (81.0) 3.19 (81.0) 3.19 (81.0) 3.18 (81.0) 3.18 (81.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

E

F

G

H 4.00 (101.6) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.94 (100.0) 3.94 (100.0) 2.37 (60.3) 2.37 (60.3) 2.37 (60.3) 2.37 (60.3) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.94 (100.0) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

continued

1.95 (49.5) 2.44 (62.0) 2.44 (62.0) 2.43 (61.9) 2.43 (61.9) 2.24 (57.0) 2.24 (57.0) 1.45 (37.0) 1.45 (37.0) 1.45 (37.0) 1.45 (37.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 1.94 (49.3) 1.94 (49.3) 1.95 (49.5) 1.95 (49.5)

BULLDOZER END BIT DIMENSIONS

4.00 (101.6) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.66 (93.0) 3.66 (93.0) 4.12 (104.8) 4.12 (104.8) 4.12 (104.8) 4.12 (104.8) 3.66 (93.0) 3.66 (93.0) 3.66 (93.0) 3.66 (93.0) 3.66 (93.0) 3.66 (93.0) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

I

3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

2.37 (60.3) 2.37 (60.3) 2.37 (60.3) 2.37 (60.3)

1.99 (50.8) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

J

K 15.31 (388.9) 15.25 (387.4) 15.25 (387.4) 15.05 (382.3) 15.05 (382.3) 15.04 (382.0) 15.04 (382.0) 15.00 (381.0) 15.00 (381.0) 15.00 (381.0) 15.00 (381.0) 14.61 (371.0) 14.61 (371.0) 14.61 (371.0) 14.61 (371.0) 14.60 (371.0) 14.60 (371.0) 14.50 (368.3) 14.50 (368.3) 14.50 (368.3) 14.50 (368.3)

L1 16.06 (407.9) 18.44 (468.4) 18.44 (468.4) 18.43 (468.3) 18.43 (468.3) 20.10 (510.0) 20.10 (510.0) 19.84 (504.0) 19.84 (504.0) 19.84 (504.0) 19.84 (504.0) 18.31 (465.0) 18.31 (465.0) 18.31 (465.0) 18.31 (465.0) 18.30 (465.0) 18.30 (465.0) 17.50 (444.5) 17.50 (444.5) 16.50 (419.1) 16.50 (419.1)

L2 10.00 (254.0) 11.55 (293.6) 11.55 (293.6) 11.55 (293.6) 11.55 (293.6) 12.15 (308.5) 12.15 (308.5) 11.41 (290.0) 11.41 (290.0) 11.41 (290.0) 11.41 (290.0) 11.63 (295.5) 11.63 (295.5) 10.00 (254.0) 10.00 (254.0) 10.62 (270.0) 10.62 (270.0) 11.60 (294.6) 11.60 (294.6) 10.00 (254.0) 10.00 (254.0)

W2

Bulldozers / Compactors

DIMENSIONS — BULLDOZER END BITS

W1

10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 7.87 (200.0) 7.87 (200.0) 8.00 (203.2) 8.00 (203.5) 8.00 (203.5) 8.03 (204.0) 8.03 (204.0) 8.03 (204.0) 8.03 (204.0) 8.00 (203.5) 8.00 (203.5) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2)

Width

10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2)

3FR 0.875 (22.0) 3FL 0.875 (22.0) 3FR 0.875 (22.0) 3FL 0.875 (22.0) 1ER 0.75 (19.0) 1EL 0.75 (19.0) 1F 0.75 (19.0) 2GL 0.75 (19.0) 2GR 0.75 (19.0) 2HR 0.75 (19.0) 2HL 0.75 (19.0) 2HR 0.625 (16.0) 2HL 0.625 (16.0) 2GL 0.75 (19.0) 2GR 0.75 (19.0) 2FR 0.75 (19.0) 2FL 0.75 (19.0) 2FL 0.75 (19.0) 2FL 0.75 (19.0) 2IR 0.75 (19.0) 2IL 0.75 (19.0)

Bolt Type Size 1.57 (40.0) 1.57 (40.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.98 (25.0) 0.75 (19.0) 0.98 (25.0) 0.98 (25.0) 0.87 (22.0) 0.87 (22.0) 0.87 (22.0) 0.87 (22.0) 0.98 (25.0) 0.98 (25.0) 1.00 (25.4) 1.00 (25.4) 0.75 (19.0) 0.75 (19.0) 0.87 (22.0) 0.87 (22.0) 5J-1420

5J-1419

4T-3046

4T-3045

4T-4436

4T-4435

8E-9901

8E-9900

3G-8322

3G-8321

3G-8320

3G-8319

9W-9015

9W-9014

3G-4285

4T-5408

4T-5407

4T-6670

4T-6669

7J-2976

7J-2975

Part Thick Number 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 3.74 (95.0) 3.74 (95.0) 4.00 (101.6) 1.38 (35.0) 1.38 (35.0) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.38 (35.0) 1.38 (35.0) 1.50 (38.1) 1.50 (38.1) 1.50 (38.0) 1.50 (38.0) 1.50 (38.1) 1.50 (38.1)

A

3.87 (98.2) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5)

3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6)

B 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 3.85 (98.0) 3.85 (98.0) 3.87 (98.2) 2.24 (57.0) 2.24 (57.0) 2.25 (57.2) 2.25 (57.2) 1.94 (49.3) 1.94 (49.3) 1.93 (49.0) 1.93 (49.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.25 (57.2) 2.25 (57.2)

C 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.50 (88.9) 3.50 (88.9) 3.19 (81.0) 3.19 (81.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

D 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.50 (88.9) 3.50 (88.9) 3.19 (81.0) 3.19 (81.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

E

3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

F

G

2.24 (57.0) 2.24 (57.0) 2.25 (57.2) 2.25 (57.2) 1.94 (49.3) 1.94 (49.3) 1.93 (49.0) 1.93 (49.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.24 (57.0) 2.25 (57.2) 2.25 (57.2)

H

4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.94 (100.0) 3.94 (100.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

continued

2.44 (62.0) 2.44 (62.0) 2.44 (62.0) 2.44 (62.0)

BULLDOZER END BIT DIMENSIONS

4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.66 (93.0) 3.66 (93.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

I 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.00 (76.2)

J

K 13.39 (340.0) 13.39 (340.0) 13.38 (339.9) 13.38 (339.9) 16.93 (430.0) 16.93 (430.0) 16.73 (425.0) 14.33 (364.0) 14.33 (364.0) 13.93 (354.0) 13.93 (354.0) 13.93 (354.0) 13.93 (354.0) 13.89 (353.0) 13.89 (353.0) 13.78 (350.0) 13.78 (350.0) 13.75 (349.2) 13.75 (349.2) 13.62 (345.9) 13.62 (345.9)

L1 15.30 (388.6) 15.30 (388.6) 15.31 (388.9) 15.31 (388.9) 20.47 (520.0) 20.47 (520.0) 16.73 (425.0) 19.25 (489.0) 19.25 (489.0) 16.97 (431.0) 16.97 (431.0) 16.97 (431.0) 16.97 (431.0) 17.38 (441.5) 17.38 (441.5) 15.98 (406.0) 15.98 (406.0) 14.85 (377.2) 14.85 (377.2) 14.72 (373.9) 14.72 (373.9)

L2

10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 10.00 (254.0) 9.92 (252.0) 9.92 (252.0) 8.00 (203.2) 10.53 (267.5) 10.53 (267.5) 9.61 (244.0) 9.61 (244.0) 9.61 (244.0) 9.61 (244.0) 10.49 (266.5) 10.49 (266.5) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 9.50 (241.3) 9.50 (241.3)

W2

Bulldozers / Compactors

DIMENSIONS — BULLDOZER END BITS

2-65

2-66

W1

7.55 (192.0) 7.55 (192.0) 7.99 (203.0) 7.99 (203.0) 7.99 (203.0) 7.99 (203.0) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 7.99 (203.0) 7.99 (203.0) 7.99 (203.0) 7.99 (203.0) 7.99 (203.0) 7.99 (203.0) 8.00 (203.2)

Width

8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2)

1FR

2IL

2IR

2IL

2IR

2IL

2IR

2FL

2FR

2F

2F

2FL

2FR

2FL

2FR

2HL

2HR

2HL

2HR

2EL

2ER

0.75 (19.0) 0.75 (19.0) 0.625 (16.0) 0.625 (16.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.625 (16.0) 0.625 (16.0) 0.625 (16.0) 0.625 (16.0) 0.625 (16.0) 0.625 (16.0) 0.625 (16.0) 0.625 (16.0) 0.75 (19.0) 0.75 (19.0) 0.625 (16.0) 0.625 (16.0) 0.625 (16.0)

Bolt Type Size 1.18 (30.0) 1.18 (30.0) 0.87 (22.0) 0.87 (22.0) 0.87 (22.0) 0.87 (22.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.625 (16.0) 0.625 (16.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 4T-3043

9F-7076

9F-7075

4J-8262

4J-8261

9F-7074

9F-7073

4T-3052

4T-3051

5R-5008

5R-5007

4T-3050

4T-3049

4T-3042

4T-3041

3G-8298

3G-8297

3G-8296

3G-8295

4T-4455

4T-4454

Part Thick Number 1.30 (33.0) 1.30 (33.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.1) 1.50 (38.1) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 1.50 (38.0) 3.97 (100.8)

A 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5)

B 2.24 (57.0) 2.24 (57.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.94 (49.3) 1.94 (49.3) 1.93 (49.0) 1.93 (49.0) 1.94 (49.3) 1.94 (49.3) 1.93 (49.0) 1.93 (49.0) 1.94 (49.3) 1.94 (49.3) 1.95 (49.5)

C 3.18 (81.0) 3.18 (81.0) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 2.50 (63.5)

D 3.18 (81.0) 3.18 (81.0) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 2.50 (63.5)

E

F

G

H 3.94 (100.0) 3.94 (100.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

continued

2.24 (57.0) 2.24 (57.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.93 (49.0) 1.94 (49.3) 1.94 (49.3) 1.93 (49.0) 1.93 (49.0) 1.94 (49.3) 1.94 (49.3) 1.93 (49.0) 1.93 (49.0) 1.94 (49.3) 1.94 (49.3)

BULLDOZER END BIT DIMENSIONS

3.66 (93.0) 3.66 (93.0) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6) 4.00 (101.6)

I

J

K 13.58 (345.0) 13.58 (345.0) 13.14 (334.0) 13.14 (334.0) 13.14 (334.0) 13.14 (334.0) 13.06 (331.7) 13.06 (331.7) 13.00 (330.2) 13.00 (330.2) 12.94 (328.7) 12.94 (328.7) 12.92 (328.2) 12.92 (328.2) 12.75 (324.0) 12.75 (324.0) 12.25 (311.0) 12.25 (311.0) 12.25 (311.1) 12.25 (311.1) 10.00 (254.0)

L1 16.93 (430.0) 16.93 (430.0) 15.82 (402.0) 15.82 (402.0) 15.83 (402.0) 15.83 (402.0) 14.89 (378.2) 14.89 (378.2) 14.50 (368.2) 14.50 (368.2) 13.56 (344.4) 13.56 (344.4) 13.55 (344.2) 13.55 (344.2) 13.75 (349.3) 13.75 (349.3) 15.00 (381.0) 15.00 (381.0) 15.00 (381.0) 15.00 (381.0) 11.40 (289.5)

L2 10.63 (270.0) 10.63 (270.0) 8.70 (221.0) 8.70 (221.0) 8.70 (221.0) 8.70 (221.0) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 9.25 (235.0) 9.25 (235.0) 9.25 (235.0) 9.25 (235.0) 9.25 (235.0) 9.25 (235.0) 8.00 (203.2)

W2

Bulldozers / Compactors DIMENSIONS — BULLDOZER END BITS

W1

8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 8.03 (204.0) 8.03 (204.0) 6.50 (165.0) 6.50 (165.0) 6.50 (165.0)

Width

8.00 (203.2) 8.00 (203.2) 8.00 (203.2) 7.99 (203.0) 7.99 (203.0) 6.50 (165.0) 6.50 (165.0) 6.50 (165.0)

1FL 0.625 (16.0) 1HR 0.625 (16.0) 1HL 0.625 (16.0) 1HL 0.75 (19.0) 1HR 0.75 (19.0) 1F 0.625 (16.0) 1FL 0.625 (16.0) 1FR 0.625 (16.0)

Bolt Type Size 0.75 (19.0) 0.87 (22.0) 0.87 (22.0) 0.875 (22.0) 0.875 (22.0) 0.625 (16.0) 0.625 (16.0) 0.625 (16.0) 6Y-5839

6Y-5840

4T-6229

140-6787

140-6788

5A-4566

5A-4565

4T-3044

Part Thick Number 3.97 (100.8) 4.00 (101.6) 4.00 (101.6) 3.99 (101.5) 3.99 (101.5) 3.25 (82.5) 3.25 (82.5) 3.25 (82.5)

A

3.99 (101.5)

B 1.95 (49.5) 1.93 (49.0) 1.93 (49.0) 3.86 (98.2) 3.86 (98.2) 2.50 (63.5) 3.99 (101.5) 3.99 (101.5)

C 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 3.00 (76.2) 3.00 (76.2) 2.50 (63.5) 2.49 (63.5) 2.49 (63.5)

D

2.49 (63.5) 2.49 (63.5)

2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 3.00 (76.2) 3.00 (76.2)

E

3.00 (76.2) 3.00 (76.2)

F

G

continued

2.44 (62.0) 2.44 (62.0)

BULLDOZER END BIT DIMENSIONS H

I

J

K 10.00 (254.0) 9.05 (230.0) 9.05 (230.0) 17.32 (440.0) 17.32 (440.0) 12.99 (330.0) 12.20 (310.0) 12.20 (310.0)

L1 11.40 (289.5) 11.85 (301.0) 11.85 (301.0) 20.35 (517.0) 20.35 (517.0) 12.99 (330.0) 14.05 (357.0) 14.05 (357.0)

L2

8.00 (203.2) 8.79 (223.5) 8.79 (223.5) 9.60 (244.0) 9.60 (244.0) 6.49 (165.0) 6.49 (165.0) 6.49 (165.0)

W2

Bulldozers / Compactors

DIMENSIONS — BULLDOZER END BITS

2-67

Bulldozers / Compactors DIMENSIONS — BULLDOZER WEAR PLATES

To calculate the curvature of a dozer blade. Formula

r=

(a2 + b2) 2b

BULLDOZER WEAR PLATES Part Number 136-3986 136-3984 136-3985 122-2320 126-8341 126-8342 126-8343 122-2321 4T-5308 6Y-1100 6Y-1319 122-2322 4T-7631 4T-7632 4T-8145 4T-8146 4T-7629 4T-7630 4T-8143 4T-8144 1U-2953 1U-3697 4T-3724 4T-3725 4T-3726 4T-3727 4T-3728 4T-3729 4T-3722 4T-3723

2-68

Radius inches mm 60.08 1526.00 60.08 1526.00 60.08 1526.00 60.00 1524.00 59.53 1512.00 59.53 1512.00 59.53 1512.00 59.37 1508.00 59.38 1508.00 59.37 1508.00 59.37 1508.00 59.37 1508.00 59.37 1508.00 59.37 1508.00 59.38 1508.00 59.37 1508.00 59.37 1508.00 59.37 1508.00 59.38 1508.00 59.37 1508.00 57.80 1468.00 57.64 1464.00 57.64 1464.00 57.64 1464.00 57.64 1464.00 57.64 1464.00 57.64 1464.00 57.64 1464.00 57.64 1464.00 57.64 1464.00

Height inches mm 72.85 1850.40 59.87 1520.70 59.87 1520.70 79.09 2009.00 79.19 2011.30 79.19 2011.30 79.19 2011.30 79.10 2009.10 78.50 1994.00 78.50 1994.00 78.50 1994.00 78.39 1991.00 70.20 1783.00 70.20 1783.00 70.19 1783.00 70.20 1783.00 69.96 1777.00 69.96 1777.00 64.41 1636.00 64.41 1636.00 82.87 2105.00 75.00 1905.00 61.83 1570.50 61.83 1570.50 61.83 1570.50 61.83 1570.50 61.83 1570.50 61.83 1570.50 56.32 1430.50 56.32 1430.50

Width inches mm 177.79 4515.90 24.21 614.90 24.21 614.90 60.62 1539.80 64.67 1642.50 64.67 1642.50 127.86 3247.70 64.69 1643.20 80.70 2050.00 176.93 4494.00 134.96 3428.00 130.20 3307.00 27.28 693.00 23.21 589.50 44.05 1115.00 47.60 1209.00 63.82 1621.00 63.82 1621.00 24.33 618.00 24.33 618.00 27.95 710.00 78.74 2000.00 45.43 1154.00 45.43 1154.00 54.72 1390.00 54.72 1390.00 27.48 698.00 27.48 698.00 23.78 604.00 23.78 604.00

Thickness inches mm 0.55 14.00 0.55 14.00 0.55 14.00 0.63 16.00 0.55 14.00 0.55 14.00 0.55 14.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.50 12.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00

Bulldozers / Compactors DIMENSIONS — BULLDOZER WEAR PLATES

To calculate the curvature of a dozer blade. Formula

r=

(a2 + b2) 2b

BULLDOZER WEAR PLATES Part Number 3G-6344 3G-6343 1U-0903 132-1488 132-1486 132-1487 9W-0810 6Y-1011 6Y-1080 9W-2409 1U-0902 9W-0808 9W-0812 9W-1259 9W-1260 9W-7261 9W-7260 9W-7263 9W-7265 9W-0811 9W-7262 9W-7264 9W-0809 9W-1258 9W-1261 4T-3732 4T-3733 4T-3734 4T-3735 4T-3736

Radius inches mm 52.13 1324.00 51.97 1320.00 50.70 1288.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00 50.55 1284.00

Height inches mm 78.94 2005.00 66.14 1680.00 71.81 1824.00 74.80 1900.00 74.59 1894.60 74.59 1894.60 70.87 1800.00 68.90 1750.00 68.90 1750.00 68.90 1750.00 65.67 1668.00 59.17 1503.00 59.17 1503.00 59.17 1503.00 59.17 1503.00 59.17 1503.00 59.13 1502.00 59.13 1502.00 59.13 1502.00 59.11 1501.50 59.11 1501.50 59.11 1501.50 59.09 1501.00 54.65 1388.00 54.65 1388.00 54.09 1374.00 54.09 1374.00 54.09 1374.00 54.09 1374.00 54.09 1373.80

Width inches mm 27.95 710.00 60.00 1524.00 48.43 1230.00 110.00 2794.00 53.23 1352.10 53.27 1353.00 74.80 1900.00 155.43 3948.00 108.66 2760.00 78.74 2000.00 74.80 1900.00 53.43 1357.00 53.43 1357.00 34.63 879.50 34.63 879.50 37.03 940.60 37.03 940.60 53.27 1353.00 53.27 1353.00 8.23 209.00 14.29 362.90 14.29 362.90 10.59 269.00 19.57 497.00 19.57 497.00 34.47 875.50 34.47 875.50 43.72 1110.50 43.72 1110.50 11.32 287.60

Thickness inches mm 0.50 12.00 0.63 16.00 0.50 12.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00

2-69

Bulldozers / Compactors DIMENSIONS — BULLDOZER WEAR PLATES

To calculate the curvature of a dozer blade. Formula

r=

(a2 + b2) 2b

BULLDOZER WEAR PLATES Part Number 4T-3737 4T-3730 4T-3731 6J-9269 6J-9249 6J-9248 1U-4417 6Y-6910 4T-9592 6Y-1255 7T-5803 9T-0251 9T-0252 9T-0253 9T-0254 9T-0255 9T-0256 6Y-6911 6Y-6912 9T-0249 9T-0250 6J-0164 2J-8523 2J-8524 9J-7539 9J-7540 2J-8525 9J-1659 9W-1771 6Y-7244

2-70

Radius inches mm 50.55 1284.00 50.55 1284.00 50.55 1284.00 46.12 1171.45 46.12 1171.40 46.00 1168.40 45.67 1160.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 45.04 1144.00 39.56 1004.80 39.56 1004.80 39.31 998.47 38.62 980.90 38.62 980.90 38.56 979.42 38.56 979.40 38.43 976.00 38.43 976.00

Height inches mm 54.09 1373.80 48.98 1244.00 48.97 1244.00 62.10 1577.34 61.94 1573.30 52.25 1327.15 58.03 1474.00 59.09 1501.00 59.05 1500.00 59.06 1500.00 59.06 1500.00 53.15 1350.00 53.15 1350.00 53.15 1350.00 53.15 1350.00 53.15 1350.00 53.15 1350.00 51.38 1305.00 51.38 1305.00 46.65 1185.00 46.65 1185.00 38.00 965.20 38.00 965.20 40.00 1016.00 45.00 1143.00 45.00 1143.00 38.00 965.20 45.00 1143.00 48.70 1237.00 48.43 1230.00

Width inches mm 18.39 467.10 18.74 476.00 16.34 415.00 41.00 1041.40 32.00 812.80 60.00 1524.00 34.05 865.00 97.17 2468.00 63.00 1600.00 141.81 3602.00 66.93 1700.00 36.53 927.80 36.53 927.80 48.36 1228.40 48.36 1228.40 14.31 363.40 14.31 363.40 48.15 1223.00 48.15 1223.00 16.50 419.00 16.50 419.00 11.00 279.40 32.00 812.80 60.00 1524.00 18.60 472.40 18.60 472.40 40.00 1016.00 32.00 812.80 122.75 3118.00 66.57 1691.00

Thickness inches mm 0.63 16.00 0.63 16.00 0.63 16.00 0.50 12.00 0.50 12.00 0.63 16.00 0.50 12.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.63 16.00 0.50 12.00 0.50 12.00 0.79 20.00 0.50 12.00 0.50 12.00 0.50 12.00 0.50 12.00 0.55 14.00 0.55 14.00

Bulldozers / Compactors DIMENSIONS — BULLDOZER WEAR PLATES

To calculate the curvature of a dozer blade. Formula

r=

(a2 + b2) 2b

BULLDOZER WEAR PLATES Part Number 6Y-7245 6Y-7246 9W-2756 9W-2758 9W-2759 9W-2757 9W-2760 9J-6870 151-7528 151-7529 3J-3142 4Z-9148 4Z-9150 4Z-9151 6J-9286 6J-9419 6J-9420 4J-4205 151-7527 6J-9285 4J-3699 4J-4129 4J-5622 3J-3380 3G-7290 3G-7291 3G-7292 2J-8256 1J-6664 1J-6663

Radius inches mm 38.43 976.00 38.43 976.00 38.43 976.00 38.43 976.00 38.43 976.00 38.43 976.00 38.43 976.00 38.38 974.80 37.24 945.80 37.24 945.80 34.62 879.30 34.57 878.00 34.57 878.00 34.57 878.00 34.56 877.82 34.56 877.82 34.56 877.82 34.56 877.82 34.53 877.00 34.38 873.25 34.31 871.50 34.25 869.95 34.06 865.12 32.20 817.88 31.10 790.00 31.10 790.00 31.10 790.00 30.94 785.80 30.88 784.40 30.88 784.35

Height inches mm 44.06 1119.20 44.06 1119.00 43.31 1100.00 40.65 1032.50 40.65 1032.50 36.60 930.00 36.61 930.00 42.48 1079.00 47.71 1211.90 47.71 1211.90 42.36 1076.00 35.10 891.50 36.28 921.50 42.16 1071.00 45.18 1147.57 42.79 1086.87 42.79 1086.87 35.00 889.00 48.24 1225.40 39.50 1003.30 41.50 1054.10 36.00 914.40 47.21 1199.13 32.00 812.80 24.29 617.00 20.85 529.50 20.85 529.50 31.00 787.40 20.00 508.00 20.00 508.00

Width inches mm 51.50 1308.00 49.19 1249.50 69.65 1769.00 25.47 647.00 25.47 647.00 13.52 343.50 13.52 343.50 54.00 1371.60 44.35 1126.50 44.35 1126.50 42.36 1076.00 15.07 382.80 15.07 382.80 110.99 2818.00 31.00 787.40 17.62 447.55 17.62 447.55 30.00 762.00 112.20 2850.00 54.00 1371.60 41.50 1054.10 54.00 1371.60 68.00 1727.20 35.38 898.65 14.17 360.00 9.29 236.00 9.29 236.00 33.62 853.90 12.00 304.80 12.00 304.80

Thickness inches mm 0.55 14.00 0.55 14.00 0.55 14.00 0.55 14.00 0.55 14.00 0.55 14.00 0.55 14.00 0.63 16.00 0.50 12.00 0.50 12.00 0.31 8.00 0.47 12.00 0.47 12.00 0.47 12.00 0.50 12.00 0.47 12.00 0.47 12.00 0.50 12.00 0.50 12.00 0.63 16.00 0.63 15.88 0.79 20.00 0.79 20.00 0.50 12.00 0.39 10.00 0.39 10.00 0.39 10.00 0.40 10.00 0.39 10.00 0.39 10.00

2-71

Bulldozers / Compactors DIMENSIONS — BULLDOZER WEAR PLATES

To calculate the curvature of a dozer blade. Formula

r=

(a2 + b2) 2b

BULLDOZER WEAR PLATES Part Number 2J-9418 4J-3868 9J-4567 4T-9534 5J-5868 4Z-9156 5J-3474 3J-3740 3J-5029 3J-5030 5J-2663 4T-6339 4T-6340 1J-3108 7F-6614 3J-3141 3J-3115 3J-3116 1J-3106 1J-2537 1J-2538 3J-3114 3J-3117 5J-2285

2-72

Radius inches mm 30.63 777.88 30.50 774.70 30.47 774.00 30.47 774.00 29.75 755.65 29.65 753.00 29.62 752.30 29.62 752.30 29.31 744.47 29.31 744.47 29.25 743.00 27.36 695.00 27.36 695.00 25.94 658.80 25.00 635.00 24.78 629.50 23.69 601.80 23.69 601.80 22.94 582.60 22.69 576.33 22.69 576.33 18.69 474.70 18.69 474.70 18.00 457.00

Height inches mm 38.88 987.55 38.88 987.60 36.34 923.00 40.22 1021.50 37.88 962.15 39.37 1000.00 39.33 999.00 24.00 609.60 29.31 744.47 29.31 744.47 39.14 994.00 36.10 917.00 36.10 917.00 28.00 700.00 24.00 609.60 30.23 768.00 27.62 701.50 27.62 701.50 23.00 584.20 27.38 695.45 27.38 695.45 21.50 546.00 21.50 546.00 13.78 350.01

Width inches mm 44.00 1117.60 68.00 1727.20 74.80 1900.00 74.80 1900.00 68.00 1727.20 50.00 1270.00 45.00 1143.00 24.00 609.60 11.81 299.97 11.81 299.97 60.00 1524.00 10.82 275.00 10.82 275.00 20.00 508.00 30.50 774.70 49.60 1260.00 37.00 939.80 27.00 685.80 26.75 679.50 11.09 281.69 11.09 281.69 31.25 793.75 51.25 1301.80 51.38 1305.05

Thickness inches mm 0.63 16.00 0.79 20.00 0.79 20.00 0.78 20.00 0.75 19.05 0.40 10.00 0.40 10.00 0.40 10.00 0.31 8.00 0.31 8.00 0.79 20.00 0.39 10.00 0.39 10.00 0.40 10.00 0.38 9.62 0.31 8.00 0.31 8.00 0.31 8.00 0.40 10.00 0.31 8.00 0.31 8.00 0.31 8.00 0.31 8.00 0.75 19.05

Bulldozers / Compactors NOTES

2-73

Bulldozers / Compactors NOTES

2-74

Excavators

Excavators — Section Contents Page Current Caterpillar 300 Series Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-004 General Purpose (GP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-004 Heavy Duty (HD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-004 Heavy Duty Rock (HDR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-004 Rock (R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-005 Rock Ripping (RR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-005 Cat Ditch Cleaning (DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-005 Noncurrent Caterpillar 300 Series Buckets . . . . . . . . . . . . . . . . . . . . . . . . . .3-006 Trenching (T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-006 Excavation (X) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-006 Utility (UT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-006 Extreme Service Trenching (ET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-007 Extreme Service Excavation (EX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-007 Mass Excavation (MX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-007 Extreme Service Mass Excavation (EMX) . . . . . . . . . . . . . . . . . . . . . . . . .3-008 Mass Excavation Spade (MXS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-008 Bank Forming (BF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-008 Noncurrent Balderson Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-009 Standard Duty (SD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-009 Performance Plus (PP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-009 Bucket Linkage Identification Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-010 Bucket Linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-011 Machine/Bucket Interchangeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-013 300 Series M318 & M320 “B Linkage” Bucket Components . . . . . . . . . . . . . . . . . . .3-014 B Family Buckets for M318 & M320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-015 318 Bucket Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-015 315 Bucket Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-016 311/312 Bucket Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-018 307 Bucket Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-020 304.5 Bucket Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-021 303.5 Bucket Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-021 302.5/303.5 Bucket Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-022 301.5/301.6/301.8 Bucket Components . . . . . . . . . . . . . . . . . . . . . . . . . . .3-022 A Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-023 B Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-023 C Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-031 D Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-038 E Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-044 F Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-045

3-1

Excavators 300 Series (continued) G Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-049 G/V Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-050 H Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-050 HB Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-051 J Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-051 JB Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-053 S Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-053 S/C Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-058 TB Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-058 UB Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-060 V Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-060 VB Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-061 W Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-062 WB Family Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-062 Quick Coupler Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-063 Quick Coupler Linkages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-063 200 Series 245 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-064 235 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-067 E300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-070 231 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-071 225, 229 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-072 E240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-075 224, J450/J460 Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-076 224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-077 E200, EL200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-079 215, 219 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-081 E180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-084 205, 206, 211, 212, 213, 214 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-086 E70B, E110, E110B, E120, E120B, 311, 312 . . . . . . . . . . . . . . . . . . . . . .3-090 Tip Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-091 Bucket Tip Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-092 Tip Option Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-093 “J” Family Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-093 K Series Excavator Upgrade Base Edge Assemblies . . . . . . . . . . . . . . . . . . .3-094 K-Tips and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-095 GET Made As Ordered (MAO) Program . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-097 Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-099 Side Pinned Weld-On Two-Strap Adapters . . . . . . . . . . . . . . . . . . . . . . . .3-099 300 Series Side-Pinned Weld-On Rock Ripping Adapters . . . . . . . . . . . . .3-100 Side Pinned Weld-On Flush Mounted Adapters . . . . . . . . . . . . . . . . . . . .3-100 Side Pinned Weld-On Bottom Strap Adapters . . . . . . . . . . . . . . . . . . . . . .3-100 Side Pinned Bolt-On Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-100

3-2

Excavators Excavator Bucket Sidecutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-101 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-105 Base Cutting Edge Assemblies/Base Cutting Edges . . . . . . . . . . . . . . . . .3-105 Excavator Bucket Conversion Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . .3-106 Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-106 Excavator Bucket Conversion Options . . . . . . . . . . . . . . . . . . . . . . . . . . .3-106 How to Take Measurements for Base Edge Conversions/Replacements . .3-107 Recommended Base Edge Thickness by Excavator Weight . . . . . . . . . . . .3-107 Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-107 Base Edge Assembly Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-108 Front Shovel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-108 Backhoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-109 Rock Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-115 Mass Excavation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-116 Clamshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-117 Bucket Base Edges without Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-118 Straight Base Edges without Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-118 Base Edge Assembly Replacement Chart . . . . . . . . . . . . . . . . . . . . . . . . .3-119 Replacement Base Edge Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-119 Base Edge Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-120 Excavator Bucket Base Edge Dimensions . . . . . . . . . . . . . . . . . . . . . . . . .3-120

3-3

Excavators

Current Caterpillar 300 Series Buckets General Purpose (GP) They are designed to optimize performance in moderate-to-easy to penetrate soils that are not highly abrasive. These buckets take advantage of the easier to load soil by using a larger tip radius to get more capacity for each bucket width.

Heavy Duty (HD) These buckets are designed to work in all but the most abrasive work conditions. They are much more durable than the GP buckets. For a given width they have a smaller tip radius. This insures excellent loadability in difficult to penetrate soils. They have thicker base edges and larger GET than the GP buckets.

Heavy Duty Rock (HDR) These buckets are designed for the most severe rock conditions. They offer the same capacity, tip radius, and GET as the heavy duty buckets, but material thickness has been increased and wear plates are larger than the heavy duty buckets. These buckets use Modulok type sidebar protectors rather than sidecutters.

3-4

Excavators

Current Caterpillar 300 Series Buckets (continued) Rock (R) Balderson offers a line of rock buckets that are designed to work in the same applications as the Cat heavy duty rock buckets. These complimentary offerings will provide a broad offering of rock buckets. They will accept sidebar protectors or sidecutters.

Rock Ripping (RR) Ruggedly constructed narrow bucket for ripping where material penetration and the inability to blast is the primary problem. The aggressive lip-type ripping design uses five “sharp” teeth. The teeth are staggered with the center tooth designed to enter the ground first at a 45 degree angle. The entire force of the machine is first applied to this one tooth. The two teeth on each side of the center tooth enter the ground next with the corner teeth (which project slightly outward) entering last. These outward projecting teeth are meant to “slice” the trench, leaving a very clean cut wall and flat bottom trench. The rock ripping bucket plate thicknesses are an average of 75% greater than standard bucket plate thicknesses. This gives more wear material and rigidity.

Cat Ditch Cleaning (DC) A wide, shallow bucket designed for cleaning ditches and slope work. Also good for grading in light materials. They will not accept teeth or sidecutters.

3-5

Excavators

Noncurrent Caterpillar 300 Series Buckets Trenching (T) General purpose bucket for trenching. Bucket width, which determines the bucket capacity, is dictated by pipe diameter. Suitable for most soil conditions where moderate impact and abrasion conditions are encountered.

Excavation (X) General purpose wide bucket for excavation. The excavation bucket has a shorter tip radius than a comparable capacity trenching bucket providing increased curl force. Suitable for the same types of material as the trenching bucket.

Utility (UT) Light duty excavation, finishing, or cleanup bucket for a variety of utility applications. Larger capacity buckets for lighter density materials. Bolt holes are provided for bolt-on teeth or bolt-on cutting edge.

3-6

Excavators

Noncurrent Caterpillar 300 Series Buckets (continued) Extreme Service Trenching (ET) For tough trenching of sandstone, most limestone, etc. with decomposed or fragmented rock content. The shell, bottom wear plates, and side plates are 15% to 25% thicker. Also, most ET buckets have thicker base edges and use larger GET than the standard trenching version. ET buckets will accept an optional weld-on ripper shank pod on the back. Equipping the bucket with rippers can extend use of Cat buckets into applications previously felt to be too tough — especially where penetration is the major obstacle. Note: Rear rippers are not available on all ET model buckets.

Extreme Service Excavation (EX) Available for tough excavation of sandstone, most limestone, caliche, etc. with decomposed or fragmented rock content. The shell, bottom wear plates, and side plates are 15% to 25% thicker. Also, the base edge is thicker and uses larger GET than the standard excavation version. Note: A ripper can be installed to extend the EX into tougher applications.

Mass Excavation (MX) General purpose bucket for volume loading of packed ground, tough dry clay, etc. A mass excavation bucket is similar structurally to an excavation bucket, except it is wider and has more capacity to take advantage of the capabilities of mass excavation arrangement.

3-7

Excavators

Noncurrent Caterpillar 300 Series Buckets (continued) Extreme Service Mass Excavation (EMX) A heavy duty mass excavation bucket designed for tough excavation of sandstone, most limestone, caliche, etc. with decomposed or fragmented rock content. The shell, bottom wear plates, side plates, and base edge are thicker and use larger GET than the mass excavation bucket.

Mass Excavation Spade (MXS) Heavy duty mass excavation bucket for loading shot rock, etc. The bucket design has spade base edge with teeth for improved penetration.

Bank Forming (BF) Similar to ditch clearing buckets, but with flat floor to help in finishing jobs (highway, industrial, railway embankments). They will not accept teeth or sidecutters.

3-8

Excavators

Noncurrent Balderson Buckets Standard Duty (SD) General purpose buckets for trenching or excavating. Suitable for most soil conditions where moderate impact and abrasion conditions are encountered. They include adapters and long tips. They accept Cat sidecutters. The 300 series buckets include adjuster groups. They are straight sided with bottom wear plates.

Performance Plus (PP) They are the same as the above standard duty buckets, except they have tapered sides and bottom wear plates.

3-9

Excavators

Bucket Linkage Identification Plate

R3.6B “R” = attach stick to a

“B” indicates

Length of stick in Meters

Reach Boom

Bucket Linkage (Bucket Family)

“M” = attach stick to a

Mass Excavation Boom NOTE: ID Plate is located on the top of the stick. Length of stick is measured from the stick/bucket pivot point to the stick/boom pivot point.

Caterpillar Bucket Identification Plate* Cat

Machine Model

Group Part No.

Assembly Part No.

Width (inches)

Width (millimeters)

Weight (pounds)

Weight (kilograms)

GET size

Blank Space

Factory Identification

Number (ID)

* Plate located on top plate assembly.

Balderson Bucket Identification Plate* CATERPILLAR Balderson Inc.

G.E.T.

NO. S/N

194219 MACHINE

CAPACITY

m3

yd3

WEIGHT

kg

lb

WIDTH

mm

in

* Plate located on top plate assembly.

3-10

Excavators BUCKET LINKAGE 300 SERIES LINKAGE CHART Series

320A

B

322A

Linkage

A

A

B

B

B

C

C

S

B

325A

A

A

B

B

B

330A

B

S

C

C

C

D

D

D

D

D

E

E*

350

345B

F

F

G

G

375

H J * Serviced with “F” bucket and 8 mm spacers. Shaded areas indicate primary linkage.

Width

3-11

3-12

J225 J250 J300 J300 J250 J350 J400 J400 J460 J460 J460 J550 J550 J600 J350 J400

Bucket Family

307 311/312 315 M318 A B S C D E F G H J Q/C “T” Q/C “X”

22 32 36 36 32 40 45 45 50 50 50 60 60 70 40 45

Edge Thk (mm) 45 65 70 80 65 80 80 80 90 100 100 110 130 130 — —

306.0 407.3 463.2 448.6 407.3 445.0* 485.0** 485.0** 485.0** 586.8 586.8 635.1 585.4 674.6 — —

Pin Spread (mm) — — — — — 485* 512.0** 512.0** 512.0** — — — — — — —

MX Pin Spread (mm) 186 221 281 311 221 311 311 351 385 425 441 501 551 651 — —

Face Spread (mm) — — — — — 108-1146 117-3517 108-1147 108-1148 — — — — —

Q/C Conversion Linkage Group

Stick to Bucket Pin d

prea

Pin S

Power Link to Bucket Pin

“Verify Bucket Pin Spread for “B” Family Buckets wider than 42 inches and “C”, “S”, and “D” Family Buckets wider than 48 inches.”

45 65 70 80 65 80 80 80 80 80 80 90 100 110 — —

Pin Diameters Front Rear (Stick Pin) (Pwr Link) (mm) (mm)

* Buckets 48" and wider use MX pin spread. ** Buckets 54" and wider use MX pin spread.

Std. GET Size 14.0 16.1 20.0 21.4 16.1 21.4 21.4 23.4 25.9 29.5 30.1 33.7 37.2 41.2

Front Pin Length (in)

Face Spread

(Power Link)

107-9942 4I-6913 111-0085 111-3801 4I-6913 087-5912 7I-7074 7Y-2207 7Y-2216 7Y-9020 107-2509 107-3600 7Y-9520 7Y-9567

Linkage Group

300 SERIES EXCAVATOR - BASIC LINKAGE & GET DATA

(Stick)

106-6734 086-0523 106-6878 087-5805 086-0523 087-5805 087-5805 7Y-2357 7Y-3550 4I-4805 4I-5016 4I-6720 7Y-9945 7Y-3585

Front Pin (Stick) 106-6734 086-0523 106-6878 087-5805 086-0523 087-5805 087-5805 7Y-2357 7Y-3549 4I-4806 4I-5015 4I-6722 7Y-9946 7Y-3587

Rear Pin (Power) 102-3143 4I-6914 106-6757 7Y-2219 4I-6914 7Y-2219 7Y-3475 7Y-3475 7Y-3476 087-5960 087-5960 4I-4070 7Y-3477 7Y-3477

Adjuster Group

Excavators BUCKET LINKAGE

Excavators

Machine/Bucket Interchangeability Models listed on the same line will interchange buckets.* (Ranked by machine size) 5230 5130 5080 375 (J linkage) 375 (H linkage) 245 Mass Excavating 245D, 245B, 245 345B, 350 (G linkage) 345B, 350 (F linkage) 235 Mass Excavating 235D, 235C, 235B, 235 330B (E linkage), 330 (E linkage) 330B (D linkage), 231D, 330 (D linkage), 325 & 325B (D linkage) 330 (C linkage), 325 & 325B (C linkage) E300B, E300, MS300-8, MS280-2 325B (D linkage), 231D, 325 (D linkage), 330 & 330B (D linkage) 325B (C linkage), 330 & 325 (C linkage) 320B, E110B, E120, E120B, 311, 312, MS120-8, (A linkage - long reach, including E200 & E240) 225D, 229D 225B, 225, 229 225B Versalink, 225D Versalink, 229 Versalink, 229D Versalink 322B (S linkage), 322 (S linkage) M318, E240B, E200B, E200, MS240-8, MS230-3, MS210-8, 322 (B linkage) 320B (C linkage), 320, 325, 325B, 330 (C linkage) 320B (B linkage), M318, E240B, E200B, E200, MS240-8, MS230-3, MS210-8, 320, 322, 325 (B linkage) 215D, 219D 215, 215C, 219, 219C 215 Versalink, 215C Versalink, 215D Versalink, 219 Versalink, 219C Versalink, 219D Versalink E200B Versalink, E200 Versalink, E180 Versalink E180 224B, 224 214B, 213B M318, B linkage, E240B, E200B, E200, MS240-8, MS230-3, MS210-8 315 E140 205, 206, 211, 212, 213, 214 312B, 312, 311B, 311, E110B, E120, E120B, 311, (A linkage), MS120-8, E200 & E240 (with long reach stick) E110, MS120-2, MS090-8 307, E70B, E70 * Even though a bucket may fit different machines, there are other factors to consider before interchanging, such as machine performance differences and application differences. 3-13

Excavators 300 SERIES

M318 & M320 “B LINKAGE” BUCKET COMPONENTS Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Adapters Sidecutter — Left Right Bolts Nuts Tip Size*

117-1425 24" 610 EX 119-3958 119-3957 6I-6354/5/6

117-1427 30" 762 EX 117-4905 117-4903 6I-6354/5/6

J350

J350

111-9262 39" 990 X 107-7436 107-7435 (5) 8E-9490 096-4747 096-4748 (8) 8T-0380 (8) 7X-0851 J300

116-3459 39" 990 X 107-7436 107-7435 (5) 8E-9490 096-4747 096-4748 (8) 8T-0380 (8) 7X-0851 J300

111-9263 43" 1090 X 112-1095 114-0790 (5) 8E-9490 096-4747 096-4748 (8) 8T-0380 (8) 7X-0851 J300

116-3462 43" 1090 X 112-1095 114-0790 (5) 8E-9490 096-4747 096-4748 (8) 8T-0380 (8) 7X-0851 J300

Bucket Type: EX — Extreme Service Excavating X — Excavating * Additional tip options found in tip option chart on page 3-93.

M318 & M320 “B LINKAGE” BUCKET COMPONENTS — Continued Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Adapters Sidecutter — Left Right Bolts Nuts Tip Size*

106-7744 47" 1195 X 114-0791 111-1272 (5) 8E-9490 096-4747 096-4748 (8) 8T-0380 (8) 7X-0851 J300

106-7747 47" 1195 X 114-0791 111-1272 (5) 8E-9490 096-4747 096-4748 (8) 8T-0380 (8) 7X-0851 J300

Bucket Type: X — Excavating EX — Extreme Service Excavating * Additional tip options found in tip option chart on page 3-93.

112-1459 47" 1195 EX 114-0791 111-1272 (5) 8E-9490 096-4747 096-4748 (8) 8T-0380 (8) 7X-0851 J300

116-3482 47" 1195 EX 114-0791 111-1272 (5) 8E-9490 096-4747 096-4748 (8) 8T-0380 (8) 7X-0851 J300

116-5997 71" 1805 DC

125-4429 79" 2007 DC Tilt

5W-7955

5W-7957

DC — Ditch Cleaning

M318 & M320 “B LINKAGE” BUCKET COMPONENTS — Continued Bucket Assembly Width — inches mm Bucket Type Base Edge

125-6756 79" 2007 DC Tilt 125-6169

Bucket Type: DC — Ditch Cleaning * Additional tip options found in tip option chart on page 3-93.

3-14

116-6993 91" 2310 DC Tilt 8U-2639

Excavators 300 SERIES

“B” FAMILY BUCKETS FOR M318 & M320 Width inches

mm

Type

Bucket *Assembly*

Edge **Assembly**

Base Edge

24 24 30 30 39 39 49 49

600 600 750 750 1000 1000 1250 1250

T T T T X X X X

117-1424 106-0982 117-1426 106-0983 117-1428 106-0984 117-1430 106-4036

131-6419 131-6419 119-3951 119-3951 119-3952 119-3952 119-3953 119-3953

131-6737 131-6737 109-5026 109-5026 107-7435 107-7435 107-7437 107-7437

Adapters (3) 8E-9490 (3) 8E-9490 (4) 8E-9490 (5) 8E-9490

Bucket Type: T — Trenching X — Excavating * Bucket assembly includes the edge assembly. ** Edge assembly includes adapters welded-on cutting edge.

318 BUCKET COMPONENTS Bucket Group Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size*

239-2529 239-2534 24" 610 HD 239-2676 N/S 3 220-9094 220-9095/6 K90

188-2242 188-2243 24" 610 HD 104-2096 N/S 3 6I-6354 6I-6355/6 J350

239-2530 239-2535 30" 762 HD 239-2634 N/S 4 (2) 220-9094 220-9095/6 K90

188-2232 188-2233 30" 762 HD 104-2097 N/S 4 (2) 6I-6354 6I-6355/6 J350

239-2531 239-2536 36" 914 HD 239-2545 N/S 5 (3) 220-9094 220-9095/6 K90

Bucket Type: HD — Heavy Duty * Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

318 BUCKET COMPONENTS — Continued Bucket Group Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size*

188-2222 188-2223 36" 914 HD 127-8633 N/S 5 (3) 6I-6354 6I-6355/6 J350

239-2532 239-2537 42" 1067 HD 239-2642 N/S 5 (3) 220-9094 220-9095/6 K90

177-8329 177-8279 42" 1067 HD 137-9526 137-9727 5 (3) 6I-6354 6I-6355/6 J350

239-2533 239-2538 48" 1219 HD 239-2650 N/S 6 (4) 220-9094 220-9095/6 K90

188-2212 188-2213 48" 1219 HD 188-2217 N/S 6 (4) 6I-6354 6I-6355/6 J350

Bucket Type: HD — Heavy Duty * Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

3-15

Excavators 300 SERIES

315 BUCKET COMPONENTS Bucket Group**** Bucket Assembly* Width — inches mm Bucket Type Base Edge Assembly** Base Edge Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

106-6758 106-6759 24" 610 GP 115-2891 N/S 3 (3) 8E-9490

168-3059 177-8293 24" 610 GP 177-8300 N/S 3 (3) 8E-9490

J300

J300

239-2509 239-2519 24" 610 GP 239-2810 N/S 3 220-9084 220-9085/6 K80

177-8204 177-8205 24" 610 HDR 177-8210 N/S 3 6I-6354 6I-6355/6 J350

239-2514 239-2524 24" 610 HDR 239-2819 N/S 3 220-9094 220-9095/6 K90

177-8217 177-8218 30" 762 HDR 177-8223 N/S 4 (2) 6I-6354 6I-6355/6 J350

239-2515 239-2525 30" 762 HDR 239-2818 N/S 4 (2) 220-9094 220-9095/6 K90

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket assembly includes the edge assembly. ** Edge assembly includes adapters welded-on cutting edge. *** Additional tip options found in tip option chart on page 3-93. **** Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. N/S = Non-Serviced

315 BUCKET COMPONENTS — Continued Bucket Group**** Bucket Assembly* Width — inches mm Bucket Type Base Edge Assembly** Base Edge Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

106-6760 106-6761 30" 762 GP 115-2901 N/S 4 (4) 8E-9490

168-3060 177-8305 30" 762 GP 177-8306 N/S 4 (4) 8E-9490

J300

J300

239-2510 239-2520 30" 762 GP 239-2774 N/S 4 (2) 220-9084 220-9085/6 K80

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket assembly includes the edge assembly. ** Edge assembly includes adapters welded-on cutting edge. *** Additional tip options found in tip option chart on page 3-93. **** Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. N/S = Non-Serviced

315 BUCKET COMPONENTS — Continued Bucket Group**** Bucket Assembly* Width — inches mm Bucket Type Base Edge Assembly** Base Edge Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

106-6768 115-2758 36" 914 GP 115-2767 N/S 5 (5) 8E-9490

168-3061 177-8311 36" 914 GP 177-8312 N/S 5 (5) 8E-9490

J300

J300

239-2511 239-2521 36" 914 GP 239-2619 N/S 5 (3) 220-9084 220-9085/6 K80

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket assembly includes the edge assembly. ** Edge assembly includes adapters welded-on cutting edge. *** Additional tip options found in tip option chart on page 3-93. **** Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. N/S = Non-Serviced

3-16

177-8230 177-8231 36" 914 HDR 177-8236 N/S 5 (3) 6I-6354 6I-6355/6 J350

239-2516 239-2526 36" 914 HDR 239-2716 N/S 5 (3) 220-9094 220-9095/6 K90

Excavators 300 SERIES

315 BUCKET COMPONENTS — Continued Bucket Group**** Bucket Assembly* Width — inches mm Bucket Type Base Edge Assembly** Base Edge Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

106-6764 106-6765 42" 1067 GP 117-5377 N/S 6 (6) 8E-9490

168-3062 177-8317 42" 1067 GP 177-8318 N/S 5 (5) 8E-9490

J300

J300

239-2512 239-2522 42" 1067 GP 239-2764 N/S 5 (3) 220-9084 220-9085/6 K80

177-8182 177-8183 42" 1067 HDR 177-8197 N/S 5 (3) 6I-6354 6I-6355/6 J350

239-2517 239-2527 42" 1067 HDR 239-2792 N/S 5 (3) 220-9094 220-9095/6 K90

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket assembly includes the edge assembly. ** Edge assembly includes adapters welded-on cutting edge. *** Additional tip options found in tip option chart on page 3-93. **** Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. N/S = Non-Serviced

315 BUCKET COMPONENTS — Continued Bucket Group**** Bucket Assembly* Width — inches mm Bucket Type Base Edge Assembly** Base Edge Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

106-6766 106-6767 48" 1219 GP 117-5386 N/S 6 (6) 8E-9490

168-3063 177-8323 48" 1219 GP 177-8324 N/S 6 (6) 8E-9490

J300

J300

239-2513 239-2523 48" 1219 GP 239-2784 N/S 6 (4) 220-9084 220-9085/6 K80

177-8243 177-8244 48" 1219 HDR 177-8249 N/S 6 (4) 6I-6354 6I-6355/6 J350

239-2518 239-2528 48" 1219 HDR 239-2801 N/S 6 (4) 220-9094 220-9095/6 K90

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket assembly includes the edge assembly. ** Edge assembly includes adapters welded-on cutting edge. *** Additional tip options found in tip option chart on page 3-93. **** Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. N/S = Non-Serviced

315 BUCKET COMPONENTS — Continued Bucket Group** Bucket Assembly* Width — inches mm Bucket Type

168-5011 159-5074 60" 1524 DC

168-5012 159-5075 66" 1676 DC

Bucket Type: DC — Ditch Cleaning * Bucket assembly includes the edge assembly. ** Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets.

3-17

Excavators 300 SERIES

311/312 BUCKET COMPONENTS Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Number of Teeth Center Adapters Tip Size**

086-0419 18" 457 GP 086-0810 3 (3) 119-3253 J250

226-1316 226-1317 18" 457 GP 226-1311 226-1310 3 (3) 119-3253 J250

102-3364 086-0422 24" 610 GP 086-0811 3 (3) 119-3253 J250

193-4762 193-4763 24" 610 GP N/S N/S 3 (3) 119-3253 J250

229-7648 229-7649 24" 610 GP 229-7650 N/S 4 (4) 119-3253 J250

229-7678 229-7679 24" 610 HDR 229-7683 N/S 3 (3) 8E-9490 J300

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. ** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

311/312 BUCKET COMPONENTS — Continued Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Tip Size**

127-6156 127-6099 27" 685 GP 127-6104 127-6105 127-6120 (3) 127-6121 4 (4) 119-3253 J250

102-3365 086-0424 28" 710 GP 086-0812

193-4778 193-4779 30" 762 GP 193-4786 N/S

229-7651 229-7652 30" 762 GP 229-7653 N/S

4 (4) 119-3253 J250

4 (4) 119-3253 J250

5 (5) 119-3253 J250

229-7685 229-7686 30" 762 HDR 229-7690 N/S

4 (4) 8E-9490 J300

6I-5143 086-0418 32" 815 GP 086-0809

5 (5) 119-3253 J250

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. ** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

311/312 BUCKET COMPONENTS — Continued Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Tip Size**

127-6157 127-6100 33" 840 GP 127-6106 127-6107 127-6122 (3) 127-6123 4 (4) 119-3253 J250

6I-5144 086-0413 36" 914 GP 106-6857 085-9510

112-7064 102-8645 36" 914 GP 102-7620 102-7635

190-3324 190-3325 36" 914 GP 190-3332 N/S

229-7654 229-7655 36" 914 GP 229-7656 N/S

5 (5) 119-3253 J250

102-7636 102-7637 5 (5) 119-3253 J250

5 (5) 119-3253 J250

6 (6) 119-3253 J250

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. ** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

3-18

229-7564 229-7565 36" 914 HDR 229-7568 N/S

5 (5) 8E-9490 J300

Excavators 300 SERIES

311/312 BUCKET COMPONENTS — Continued Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Tip Size**

102-3366 086-0426 39" 990 GP 086-0813

127-6108 127-6101 39" 990 GP 127-6108 127-6109

193-4794 193-4795 42" 1067 GP N/S N/S

229-7657 229-7658 42" 1067 GP 229-7659 N/S

5 (5) 119-3253 J250

127-6124 (3) 127-6125 5 (5) 119-3253 J250

5 (5) 119-3253 J250

7 (7) 119-3253 J250

229-7577 229-7624 42" 1067 HDR 229-7628 N/S

5 (5) 8E-9490 J300

102-3367 086-0428 43" 1090 GP N/S

5 (5) 119-3253 J250

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. ** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

311/312 BUCKET COMPONENTS — Continued Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Tip Size**

127-6159 127-6102 45" 1145 GP 127-6110 127-6111

112-7065 125-0513 45" 1145 DC 7Y-6601 a

127-6126 (3) 127-6127 6 (6) 119-3253 J250

086-0429 47" 1195 GP N/S

6 (6) 119-3253 J250

193-4810 193-4811 48" 1219 GP N/S N/S

(6) 119-3253 J250

229-7660 229-7661 48" 1219 GP 229-7662 N/S

7 (7) 119-3253 J250

127-6160 127-6103 51" 1295 GP 127-6112 127-6128 (3) 127-6129 6 (6) 119-3253 J250

Bucket Type: GP — General Purpose DC — Ditch Cleaning * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. ** Additional tip options found in tip option chart on page 3-93. a Base edge only — no adapters. N/S = Non-Serviced

311/312 BUCKET COMPONENTS — Continued Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly

109-8394 9772C a 60" 1524 DC N/S

085-4783

099-7873

71" 1805 DC N/S

71" 1805 BF N/S

Bucket Type: DC — Ditch Cleaning BF — Bank Forming * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. a Balderson Part # 1-800-255-2372. N/S = Non-Serviced

3-19

Excavators 300 SERIES

307 BUCKET COMPONENTS Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Number of Teeth Center Adapters Tip Size**

111-0658 12" 305 GP 121-9162 121-9161 3 6Y-3224 J225

231-4547 225-1112 13" 330 GP 231-2988 N/S 3 (3) 6Y-3224 J225

102-3141 102-3142 16" 405 GP

102-3141 157-9351 16" 405 GP

086-2658 3 6Y-3224 J225

086-2658 3 6Y-3224 J225

177-8109 177-8110 18" 457 GP 158-3958 N/S 3 (3) 153-1552 J225

086-1500 20" 510 GP N/S 3 6Y-3224 J225

Bucket Type: GP — General Purpose * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. ** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

307 BUCKET COMPONENTS — Continued Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Number of Teeth Center Adapters Tip Size**

102-3144 102-3145 20" 510 GP

157-9352 157-9353 20" 510 GP

086-2659 3 (3) 6Y-3224 J225

086-2659 3 (3) 6Y-3224 J225

102-3146 102-3147 24" 610 GP 110-9983 110-9984 4 (4) 6Y-3224 J225

157-9354 157-9355 24" 610 GP 110-9983 110-9984 4 (4) 6Y-3224 J225

177-8111 177-8112 24" 610 GP 153-1558 153-1559 4 (4) 153-1552 J225

241-0253 241-0256 24" 610 HDR 241-0283 4 (4) 119-3253 J250

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. ** Additional tip options found in tip option chart on page 3-93.

307 BUCKET COMPONENTS — Continued Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Number of Teeth Center Adapters Tip Size** Sidecutter RH LH Bolts Nuts

102-3148 102-3149 25" 635 GP 111-0038 111-0039 4 (4) 6Y-3224 J225

157-9356 157-9357 25" 635 GP 111-0038 111-0039 4 (4) 6Y-3224 J225

086-1496

4 (4) 6Y-3224 J225

4 (4) 6Y-3224 J225

4 (4) 6Y-3224 J225

153-1646 153-1647 (6) 096-7074 (6) 8T-4131

153-1646 153-1647 (6) 096-7074 (6) 8T-4131

153-1646 153-1647 (6) 096-7074 (6) 8T-4131

153-1646 153-1647 (6) 096-7074 (6) 8T-4131

153-1646 153-1647 (6) 096-7074 (6) 8T-4131

28" 710 GP N/S

102-3150 102-3151 28" 710 GP 106-6858

Bucket Type: GP — General Purpose * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. ** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

3-20

157-9358 157-9359 28" 710 GP 106-6858

177-8113 177-8114 30" 787 GP 153-1583 N/S 5 (5) 153-1552 J225

Excavators 300 SERIES

307 BUCKET COMPONENTS — Continued Bucket Group* Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Number of Teeth Center Adapters Tip Size**

241-0252 241-0255 30" 762 HDR 241-0282 5 (5) 119-3253 J250

086-1502 33" 840 GP N/S 5 (5) 6Y-3224 J225

177-8115 177-8116 36" 914 GP 153-1585 153-1586 6 (6) 153-1552 J225

Bucket Type: HDR — Heavy Duty Rock GP — General Purpose * Bucket group part numbers are found in the Machine Price List and are used by Machine Sales to order buckets. ** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

304.5 BUCKET COMPONENTS Bucket Group Bucket Assembly Width — inches mm Bucket Type Base Edge Number of Teeth Bolt-On Unitooth Bolt Nut Sidecutter (L/R)

188-4369* 180-3623 180-3624 180-3625 180-3626 180-3622 188-4371* 180-3628 180-3629 180-3630 180-3631 180-3627 12" 16" 20" 24" 28" 305 405 510 610 710 DIG DIG DIG DIG DIG 180-3638 180-3647 180-3648 180-3649 180-3650 3 3 4 4 4 (3) 135-8203 (3) 135-8203 (4) 135-8203 (4) 135-8203 (4) 135-8203 (6) 4F-3656 (6) 4F-3656 (8) 4F-3656 (8) 4F-3656 (8) 4F-3656 (6) 4K-0367 (6) 4K-0367 (8) 4K-0367 (8) 4K-0367 (8) 4K-0367 180-3639/40 180-3639/40 180-3639/40 180-3639/40 180-3639/40

180-1355 40" 1016 DC 180-1365

Bucket Type: DIG — Digging DC — Ditch Cleaning * Includes 2 bucket mounting pins, 2 hydraulic fittings, and 4 retaining rings.

304.5 BUCKET COMPONENTS — Continued Bucket Assembly Width — inches mm Bucket Type Base Edge Bucket Type:

180-1356 51" 1295 DC 180-1366

180-1357 63" 1600 DC 180-1367

DC — Ditch Cleaning

303.5 BUCKET COMPONENTS Bucket Group Bucket Assembly Width — inches mm Bucket Type Base Edge Number of Teeth Bolt-On Unitooth Bolt Nut Sidecutter (L/R) Bucket Type:

DIG — Digging

171-2759 171-2760 12" 305 DIG 174-2141 3 (3) 135-9390 (6) 159-8839 (6) 8T-4778 174-2133/4

171-2761 171-2762 16" 405 DIG 174-2152 3 (3) 135-9390 (6) 159-8839 (6) 8T-4778 174-2133/4

171-2763 171-2764 20" 510 DIG 174-2153 4 (4) 135-9390 (8) 159-8839 (8) 8T-4778 174-2133/4

171-2767 171-2768 24" 610 DIG 174-2154 4 (4) 135-9390 (8) 159-8839 (8) 8T-4778 174-2133/4

171-2769 171-2770 26" 660 DIG 174-2155 4 (4) 135-9390 (8) 159-8839 (8) 8T-4778 174-2133/4

174-2460 40" 1016 DC 153-7879

DC — Ditch Cleaning

3-21

Excavators 300 SERIES

303.5 BUCKET COMPONENTS — Continued Bucket Assembly Width — inches mm Bucket Type Base Edge Bucket Type:

174-2461 47" 1195 DC 153-7880

174-1811 55" 1397 DC 173-9770

DC — Ditch Cleaning

302.5/303.5 BUCKET COMPONENTS Bucket Group Bucket Assembly Width — inches mm Bucket Type Base Edge Number of Teeth Bolt-On Unitooth Bolt Nut Sidecutter (L/R)

176-7283* 153-7848 179-6704* 153-7849 10" 255 DIG 153-7873 3 (3) 135-9390 (6) 159-8839 (6) 8T-4778 135-9376/7

153-7851

153-7854

190-7390

153-7857

153-7860

153-7852

153-7855

190-7392

153-7858

153-7861

12" 305 DIG 153-7874 3 (3) 135-9390 (6) 159-8839 (6) 8T-4778 135-9376/7

16" 405 DIG 153-7875 3 (3) 135-9390 (6) 159-8839 (6) 8T-4778 135-9376/7

18" 457 DIG 190-7394 3 (3) 135-9390 (6) 159-8839 (6) 8T-4778 135-9376/7

20" 510 DIG 153-7876 4 (4) 135-9390 (8) 159-8839 (8) 8T-4778 135-9376/7

24" 610 DIG 153-7877 4 (4) 135-9390 (8) 159-8839 (8) 8T-4778 135-9376/7

Bucket Type: DIG — Digging * Includes 2 bucket mounting pins, 2 hydraulic fittings, and 4 retaining rings.

302.5/303.5 BUCKET COMPONENTS — Continued Bucket Assembly Width — inches mm Bucket Type Base Edge Bucket Type:

153-7863 32" 815 DC 153-7878

153-7865 40" 1016 DC 153-7879

153-7867 47" 1195 DC 153-7880

DC — Ditch Cleaning

301.5/301.6/301.8 BUCKET COMPONENTS Bucket Group Bucket Assembly Width — inches mm Bucket Type Base Edge Number of Teeth Bolt-On Unitooth Bolt Nut Sidecutter (L/R)

(3) (3) (6) (6)

147-1014 147-1015 9" 230 DIG 147-1033 3 135-9380 138-6410* 8T-4183 8T-4244 135-9378/9

(3) (3) (6) (6)

147-1018 147-1017 12" 305 DIG 147-1034 3 135-9380 138-6410* 8T-4183 8T-4244 135-9378/9

(3) (3) (6) (6)

147-1020 147-1021 16" 405 DIG 147-1035 3 135-9380 138-6410* 8T-4183 8T-4244 135-9378/9

(3) (3) (6) (6)

190-7387 190-7388 18" 457 DIG 190-7389 3 135-9380 138-6410* 8T-4183 8T-4244 135-9378/9

(4) (4) (8) (8)

147-1023 147-1024 20" 510 DIG 147-1036 4 135-9380 138-6410* 8T-4183 8T-4244 135-9378/9

Bucket Type: DIG — Digging * Service replacement for 135-9380 factory unitooth. Use 160-0018 flat head screw.

301.5/301.6/301.8 BUCKET COMPONENTS — Continued Bucket Assembly Width — inches mm Bucket Type Base Edge Bucket Type:

3-22

DC — Ditch Cleaning

147-1029 32" 815 DC 147-1038

147-1031 40" 1016 DC 147-1039

(4) (4) (8) (8)

147-1026 147-1027 24" 610 DIG 147-1037 4 135-9380 138-6410* 8T-4183 8T-4244 135-9378/9

Excavators 300 SERIES

A FAMILY BUCKETS Bucket Group* Bucket Assembly Width — inches mm Bucket Type

7Y-6402 7Y-6660 32" 815 GP

Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped

7Y-6664 N/S

Number of Teeth Center Adapters Tip Size**

7Y-6665 7Y-6666 7Y-6667 7Y-6668 5 (5) 119-3253 J250

112-7064 32" 815 Longreach, Backhoe 102-7620

112-7064 7Y-6660 36" 914 GP

229-7564 229-7565 36" 914 GP

121-1807 45" 1145 DC

125-0513

7Y-6664 N/S

229-7568 N/S

7Y-6601 a

7Y-6601 a

45" 1145 DC – Longreach

102-7636 102-7637

(5) 119-3253 J250

5 (5) 7Y-0254 J250

5 (5) 8E-9490 J300

Bucket Type: GP — General Purpose DC — Ditch Cleaning * Bucket group includes slack adjuster group. ** Additional tip options found in tip option chart on page 3-93. a Base edge only — no adapters. N/S = Non-Serviced

B FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Front — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

100-6223 100-6224 24" 610 ET 104-2096

239-7646 250-5812 24" 610 GP 240-9602

129-5046 129-4867 24" 610 HD 104-2096 100-6480

142-2540 142-2547 24" 610 HD 104-2096

231-5175 231-5181 24" 610 HD 227-8740

162-2950 162-2948 24" 610 HDR 104-2096

(3) 100-6478 (2) 100-6479

(1) 209-5740 (5) 209-5741

127-8624 (3) 128-0700

127-8624 (3) 128-0700

(1) 231-5996 (4) 241-6317

162-2946 (3) 149-5218 (4) 149-5219

3 6I-6354 6I-6355/6 J350

3 6I-6354 6I-6355/6 J350

3 6I-6354 6I-6355/6 J350

(2) 213-4536 3 (1) 220-9084 220-9085/6 K80

Bucket Type: ET — Extreme Trenching GP — General Purpose * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

HD — Heavy Duty

N/S 3 (1) 220-9094 220-9095/6 K90

3 6I-6354 6I-6355/6 J350

HDR — Heavy Duty Rock

See sidecutter chart on page 3-66.

3-23

Excavators 300 SERIES

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

231-8783 231-8787 24" 610 HDR 227-8740 (1) 231-5996 (4) 231-8064 (3) 231-8065 N/S 3 (1) 220-9094 220-9095/6 K90

208-3594

217-9740

129-9627

25" 635 HD† 208-7528

25" 635 HDR† 208-7528

27" 685 R 188-424 a 104-2097 (2) 4I-4199

(1) 208-8771 (3) 208-8770

217-9220 (4) 217-9219 (3) 217-9742

3 6I-6354 168-1355/6 J350

Bucket Type: HDR — Heavy Duty Rock HD — Heavy Duty R — Rock * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Balderson Part # 1-800-255-2372. † Dedicated Coupler. N/S = Non-Serviced

3 6I-6354 168-1355/6 J350 ET — Extreme Trenching

100-4187 100-4188 30" 762 ET 100-5360

30" 762 GP 104-2097

(3) 100-5356 (2) 100-5357

133-2301 (3) 100-5357

3 6I-6354 6I-6355/6 J350

4 (2) 6I-6354 6I-6355/6 J350

3 6I-6354 6I-6355/6 J350

132-5059

GP — General Purpose

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Front — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

151-9856 151-9857 30" 762 GP 104-2097

239-7647 250-5813 30" 762 GP 240-9603

129-5045 129-4866 30" 762 HD 104-2097

142-2541 142-2548 30" 762 HD 104-2097

231-5176 231-5182 30" 762 HD 228-6951

134-1883 134-1893 30" 762 HDR 104-2097

133-2301 (3) 100-5357

(1) 198-8737 (5) 199-6291

127-8626 (3) 127-6942

127-8626 (3) 127-6942

(1) 231-5997 (4) 231-5956

134-1909 (3) 134-1911 (4) 134-1910

(2) 133-2300 4 (2) 6I-6354 6I-6355/6 J350

(2) 213-4536 4 (2) 220-9084 220-9085/6 K80

4 (2) 6I-6354 6I-6355/6 J350

4 (2) 6I-6354 6I-6355/6 J350

N/S 4 (2) 220-9094 220-9095/6 K90

Bucket Type: GP — General Purpose HD — Heavy Duty HDR — Heavy Duty Rock * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

See sidecutter chart on page 3-66.

3-24

4 (2) 6I-6354 6I-6355/6 J350

Excavators 300 SERIES

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Front — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

142-2542 142-2549 30" 762 HDR 104-2097

231-8784 231-8788 30" 762 HDR 228-6951

6I-5000 7Y-9128 35" 890 T 7Y-9133

100-4131 100-4132 36" 914 T 100-4139

132-5060 36" 914 GP 127-8633

151-9858 151-9859 36" 914 GP 127-8633

148-8849 (3) 134-1911

(1) 231-5997 (4) 231-8066 (3) 231-8067

7Y-9136 (2) 7Y-9132

(3) 100-4137 (2) 100-4138

133-2302 (3) 108-6951

133-2302 (3) 108-6951

5 (5) 8E-9490

5 (5) 8E-9490

J300

J300

5 (3) 6I-6354 6I-6355/6 J350

(2) 133-2300 5 (3) 6I-6354 6I-6355/6 J350

(4) 134-1910 N/S 4 (2) 220-9094 220-9095/6 K90

4 (2) 6I-6354 6I-6355/6 J350

Bucket Type: HDR — Heavy Duty Rock T — Trenching GP — General Purpose * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side Cutting Edge Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

239-7648 250-5814 36" 914 GP 240-9604

153-0323 36" 914 GP† 127-8633

(1) 199-6281 (5) 199-6292 (2) 213-4536

133-2302 (3) 108-6951 (2) 133-2300

5 (3) 220-9084 220-9085/6 K80

5 (3) 6I-6354 6I-6355/6 J350

253-8134 253-8139 36" 914 GP† 245-8862

127-8629 127-8630 36" 914 HD 127-8633

142-2543 142-2550 36" 914 HD 127-8633 N/S

231-5177 231-5183 36" 914 HD 228-6952

(1) 199-6281 (5) 199-6292

127-5088 (3) 127-2281

127-5088 (3) 127-2281

(1) 231-5998 (4) 231-5957 N/S

5 (3) 6I-6354 6I-6355/6 J350

5 (3) 6I-6354 6I-6355/6 J350

5 (3) 220-9094 220-9095/6 K90

240-3585

Bucket Type: GP — General Purpose HD — Heavy Duty * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. † Dedicated Coupler. N/S = Non-Serviced

See sidecutter chart on page 3-66.

3-25

Excavators 300 SERIES

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped

228-5832 a 228-5853 36" 914 HDP 228-6952 (1) 198-2928 (5) 198-2929

Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

N/S 5 (3) 220-9094 220-9095/6 K90

134-1884 134-1894 36" 914 HDR 127-8633

142-2544 142-2551 36" 914 HDR 127-8633 N/S

134-1913 (4) 134-1914 (3) 134-1915

148-8850 (3) 134-1915 (4) 134-1914

5 (3) 6I-6354 6I-6355/6 J350

5 (3) 6I-6354 6I-6355/6 J350

231-8785 231-8789 36" 914 HDR 228-6952 (1) 231-5998 (4) 231-8068 (3) 231-8069 N/S 5 (3) 220-9094 220-9095/6 K90

244-3883 36" 914 HDR† 228-6952

6I-5001 7Y-7895 39" 990 T 7Y-9111

231-5998 (4) 231-8068 (3) 231-8069

(2) 7Y-9108 7Y-9109 (2) 7Y-9110

5 (3) 220-9094 220-9095/6 K90

5 (5) 8E-9490 J300

Bucket Type: HDP — Heavy Duty Power HDR — Heavy Duty Rock T — Trenching * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. † Dedicated Coupler. N/S = Non-Serviced

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6I-5002 7Y-9129 39" 990 T 7Y-9111

100-4141 100-4142 42" 1067 T 100-4149

(3) 7Y-9108 (2) 7Y-9110

(3) 100-4147 (2) 100-4148

133-2303 (3) 108-6952

5 (5) 8E-9490

5 (5) 8E-9490

J300

J300

5 (3) 6I-6354 6I-6355/6 J350

Bucket Type: T — Trenching GP — General Purpose * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. † Dedicated Coupler. N/S = Non-Serviced

See sidecutter chart on page 3-66.

3-26

132-5061 42" 1067 GP 6I-5193

151-9860 151-9861 42" 1067 GP 6I-5193 133-2303 (3) 108-6952 (2) 133-2300 5 (3) 6I-6354 6I-6355/6 J350

239-7649 250-5815 42" 1067 GP 240-9605 (1) 199-6278 (5) 199-6294 (2) 213-4536 5 (3) 220-9084 220-9085/6 K80

153-0325 42" 1067 GP† 6I-5193 N/S 133-2303 (3) 108-6952 (2) 133-2300 5 (3) 6I-6354 6I-6355/6 J350

Excavators 300 SERIES

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly

123-3544 123-3210 42" 1067 HD 6I-5193

123-3544 123-3210 42" 1067 HD 137-9526

142-2545 142-2552 42" 1067 HD 137-9526

231-5178 231-5184 42" 1067 HD 228-6953

228-5833 a 228-5854 42" 1067 HDP 228-6953

Base Edge Bottom Wear Strip Front — Flat Rear — Shaped

120-7160 (3) 123-3212

127-5089 (3) 123-3212

127-5089 (3) 123-3212

(1) 231-5999 (4) 231-5958

(1) 197-2767 (5) 198-5212

Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

5 (3) 6I-6354 6I-6355/6 J350

5 (3) 6I-6354 6I-6355/6 J350

5 (3) 6I-6354 6I-6355/6 J350

N/S 5 (3) 220-9094 220-9095/6 K90

N/S 5 (3) 220-9094 220-9095/6 K90

134-1885 134-1895 42" 1067 HDR 6I-5193 137-9526

137-9527 134-1916 (4) 134-1917 (3) 134-1918 5 (3) 6I-6354 6I-6355/6 J350

Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power HDR — Heavy Duty Rock * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

142-2546 142-2553 42" 1067 HDR 137-9526 137-9527 148-8851 (3) 134-1918 (4) 134-1917 5 (3) 6I-6354 6I-6355/6 J350

231-8786 231-8790 42" 1067 HDR 228-6953

165-0958 168-2969 43" 1090 X N/S

8R-2254 43" 1090 EX 9C-8019

6I-5003 7I-0376 44" 1120 X 1R-8903

(1) 231-5999 (4) 231-8070 (3) 231-8071 N/S 5 (3) 220-9094 220-9095/6 K90

168-2982 168-2983

5 (5) 8E-9490 J300

(2) 9C-4479 (3) 9C-4480

5 (3) 6I-6354 6I-6355/6 J350

165-0959 168-3020 44" 1120 X N/S 168-3028 168-3026 168-3027

5 (5) 8E-9490

5 (5) 6I-6354

J300

J350

Bucket Type: HDR — Heavy Duty Rock X — Excavating EX — Extreme Service Excavating * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

See sidecutter chart on page 3-66.

3-27

Excavators 300 SERIES

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6I-5008 7Y-9134 44" 1120 EX 6I-5187 6I-6355/6

5I-8902 7Y-9130 47" 1195 X 4I-4014

165-0960 168-2985 48" 1219 X N/S 168-2993

(3) 4I-7185 (3) 4I-7186

(3) 4I-4012 (2) 4I-4013

168-2991 168-2992

5 (3) 6I-6354 6I-6355/6 J350

6 (6) 8E-9490

5 (5) 8E-9490

J300

J300

Bucket Type: EX — Extreme Service Excavating X — Excavating * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. † Dedicated Coupler. N/S = Non-Serviced

132-5062 48" 1219 GP 129-5714 133-2304 (3) 136-2026 6 (4) 6I-6354 6I-6355/6 J350

151-9862 151-9863 48" 1219 GP 129-5714 129-5715

153-0327 48" 1219 GP† 129-5714 129-5715

133-2304 (3) 136-2026 (2) 133-2300 6 (4) 6I-6354 6I-6355/6 J350

133-2304 (3) 136-2026 (2) 133-2300 6 (4) 6I-6354 6I-6355/6 J350

231-5179 231-5185 48" 1219 HD 225-6813

233-4899 233-4901 48" 1219 HD 225-6813

GP — General Purpose

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

239-7650 250-5816 48" 1219 GP 240-9606 (1) 199-6279 (5) 199-6295 (2) 213-4536 6 (4) 220-9084 220-9085/6 K80

129-5704 129-5706 48" 1219 HD 129-5714

148-8828 148-8831 48" 1219 HD 129-5714 129-5715

127-2287 (3) 127-2288

127-2287 (3) 127-2288

127-2287 (3) 127-2288

6 (4) 6I-6354 6I-6355/6 J350

6 (4) 6I-6354 6I-6355/6 J350

6 (4) 6I-6354 6I-6355/6 J350

Bucket Type: GP — General Purpose HD — Heavy Duty * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a HD bucket for AEM Pin Grabber. N/S = Non-Serviced

See sidecutter chart on page 3-66.

3-28

163-5473 a 163-5477 48" 1219 HD 129-5714 129-5715

(1) 231-6000 (4) 231-5959 N/S 6 (4) 220-9094 220-9095/6 K90

(1) 231-6000 (4) 231-5959 N/S 6 (4) 220-9094 220-9095/6 K90

Excavators 300 SERIES

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Front — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

253-8228

225-6814 a 225-6815 48" 1219 HDP 225-6813

48" 1219 HD† 225-6813 231-6000 (4) 231-5959 251-7114

(1) 198-8730 (5) 198-2768

6 (4) 220-9094 220-9095/6 K90

N/S 6 (4) 220-9094 220-9095/6 K90

168-3029 168-3030 48.5" 1230 X N/S 168-3047

110-2116 110-2113 49" 1245 X 7I-6695

6I-5004 7I-6692 50" 1270 X 7I-6695

168-2998 168-2999 50" 1270 X N/S 168-3007

168-3045 168-3046

(2) 102-4239 (3) 102-4240

(2) 7I-6698 (3) 7I-6697

168-3005 168-3006

5 (5) 6I-6354

6 (6) 8E-9490

6 (6) 8E-9490

6 (6) 8E-9490

J350

J300

J300

J300

187-1368 N/A 54" 1372 GP† N/A N/S****

Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power X — Excavating * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6I-5005 7I-6693 54" 1372 X 7I-6707

8R-2259 54" 1372 X 9C-7315

(2) 7I-6710 (3) 7I-6709 6 (6) 8E-9490 J300

6 (4) 9W-1304 7T-3305/6 J300

110-2117 110-2114 54" 1372 X 7I-6707

166-1285 172-3847 54" 1372 GP 129-5719 N/S

153-0329 54" 1372 GP† 129-5719 N/S

(2) 102-4243 (3) 102-4244

153-7959 (3) 153-7960 (2) 133-2300 7 (5) 6I-6354 6I-6355/6 J350

153-7959 (3) 153-7960 (2) 133-2300 7 (5) 6I-6354 6I-6355/6 J350

6 (6) 8E-9490 J300

N/A

Bucket Type: X — Excavating GP — General Purpose * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. **** Bolt-On options include a 1U-1476 Bolt-On Cutting Edge and (8) 4J-9058 Bolts and (8) 2J-3507 Nuts. † Dedicated Coupler. N/S = Non-Serviced

See sidecutter chart on page 3-66.

3-29

Excavators 300 SERIES

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters CornerAdapters (R/L) Tip Size***

239-7651 250-5817 54" 1372 GP 240-9607 (1) 204-6637 (5) 204-6638 (2) 213-4536 6 (4) 220-9084 220-9085/6 K80

129-5705 129-5707 54" 1372 HD 129-5719 N/S

148-8829 148-8832 54" 1372 HD 129-5719 N/S

163-5475 a 153-5478 54" 1372 HD 129-5719 N/S

127-2294 (3) 127-2295

127-2294 (3) 127-2295

127-2294 (3) 127-2295

7 (5) 6I-6354 6I-6355/6 J350

7 (5) 6I-6354 6I-6355/6 J350

7 (5) 6I-6354 6I-6355/6 J350

231-5180 231-5186 54" 1372 HD 235-2498 (1) 231-6001 (4) 231-5960 N/S 6 (4) 220-9094 220-9095/6 K90

233-4900 233-4902 54" 1372 HD 235-2498 (1) 231-6001 (4) 231-5960 N/S 6 (4) 220-9094 220-9095/6 K90

Bucket Type: GP — General Purpose HD — Heavy Duty * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a HD bucket for AEM Pin Grabber. N/S = Non-Serviced

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters CornerAdapters (R/L) Tip Size***

132-5063 56" 1420 DC

153-0330 56" 1420 DC

135-8636

135-8636

Bucket Type: DC — Ditch Cleaning EX — Extreme Service Excavating * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a E240B. N/S = Non-Serviced

See sidecutter chart on page 3-66.

3-30

129-1531 129-1532 60" 1524 HD 129-1539 129-1540

177-8274 177-8275 60" 1524 HD 129-1539 129-1540

9C-3325 (4) 9C-3326

127-2302 (3) 127-2303

193-4923 (3) 127-2303

7 (5) 6I-6354 6I-6355/6 J350

7 (5) 6I-6354 6I-6355/6 J350

7 (5) 6I-6354 6I-6355/6 J350

8R-6510 a 60" 1524 EX 108-3569

HD — Heavy Duty

199-4020 199-4021 60" 1524 DC N/S

Excavators 300 SERIES

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Bottom Wear Strip Front — Flat Rear — Shaped GET Bolt-On Cutting Edge Bolts Nuts

231-8742 a N/S 60" 1524 DC 227-8203 233-4237

6I-5009 7Y-9135 68" 1725 U 8R-2662***

132-5064 135-8633 68" 1725 DC 135-8637

153-0331 68" 1725 DC 135-8637

132-5064 68" 1725 DC 135-8637

127-6066 (2) 4I-7278

231-8746 a N/S 72" 1829 DC 232-2923 233-4238

BOCE (2) 217-4849 (6) 4J-9208 (6) 2J-3507

BOCE (2) 174-8029 (6) 4J-9208 (6) 2J-3507

Bucket Type: DC — Ditch Cleaning U — Utility * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bolt-On options include a 6I-6350 Bolt-On Cutting Edge and (9) 3K-9770 Nuts and (9) 6V-6535 Bolts. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

B FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Bolt-On Cutting Edge Bolts Nuts

197-6085 197-6086 74" 1880 DC 174-8026 (8) 8J-2935 (8) 2J-3505

198-1726† 197-6089 74" 1880 DC 174-8026 (8) 8J-2935 (8) 2J-3505

198-1727† 197-6090 74" 1880 DC 174-8026 (8) 8J-2935 (8) 2J-3505

Bucket Type: DC — Ditch Cleaning * B Family Buckets require “B” Family Bucket linkage. ** Bucket group includes slack adjuster group. † Dedicated Coupler.

See sidecutter chart on page 3-66.

C FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

129-9621 28" 710 R 190-725 a

120-7007 30" 762 R 190-597 a (2) 7Y-7694

3 6I-6404 6I-6405/6 J400

3 6I-6404 6I-6405/6 J400

132-5051 135-5425 30" 762 GP 105-2761 133-2243 (3) 100-4346 (2) 133-2242 3 6I-6404 6I-6405/6 J400

233-0559 233-0550 30" 762 GP 228-6951 (1) 198-8737 (5) 199-6291 (2) 220-1337 4 (2) 220-9094 220-9095/6 K90

153-0333 30" 762 GP† 105-2761 133-2243 (3) 100-4346 (2) 133-2242 3 6I-6404 6I-6405/6 J400

100-4189 100-4190 30" 762 HD 105-2761 (4) 127-5711 (2) 127-5710 3 6I-6404 6I-6405/6 J400

Bucket Type: R — Rock GP — General Purpose HD — Heavy Duty * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Balderson Part # 1-800-255-2372. † Dedicated Coupler.

See sidecutter chart on page 3-66.

3-31

Excavators 300 SERIES

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Front — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

100-4189 113-1856 30" 762 HD

142-2568 142-2575 30" 762 HD 105-2761

239-7547 239-7554 30" 762 HD 241-6725

239-7561 239-7565 30" 762 HDR 241-6725

162-3088 162-3090 30" 762 HDR 105-2761

162-3088 162-3090 30" 762 HDR 105-2761

(3) 100-4347 (2) 100-4346

127-5710 (4) 127-5711

(1) 241-6300 (4) 231-6317

(1) 241-6300 (4) 231-8066 (3) 231-8067

(4) 162-6895

(4) 162-6895

(4) 162-6894

(4) 162-6890

N/S 3 (1) 220-9104 220-9105/6 K100

(2) 150-4593 3 (1) 220-9104 220-9105/6 K100

3 6I-6404 6I-6405/6 J400

3 6I-6404 6I-6405/6 J400

3 6I-6404 6I-6405/6 J400

3 6I-6404 6I-6405/6 J400

Bucket Type: HD — Heavy Duty HDR — Heavy Duty Rock * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Intermediate Adapters Corner Adapters (R/L) Tip Size***

6I-5017 7Y-7776 33" 840 RR 4I-7288 a

5 107-3464 (2) 107-3465 (2) 107-3466 J460

6I-5018 7Y-7603 36" 914 T 6I-5280

113-5798 113-1857 36" 914 T 6I-5280

132-5052 135-5426 36" 914 GP 132-8418 6I-5280

153-0335 36" 914 GP 132-8418

233-0560 233-0551 36" 914 GP 228-6952

(3) 7Y-7608 (3) 7Y-7609

110-5921 (4) 113-7682

4 (2) 6I-6354

4 (2) 6I-6354

133-2244 (4) 113-7682 (2) 133-2242 5 (3) 6I-6354

133-2244 (4) 113-7682 (2) 133-2242 5 (3) 6I-6354

(1) 199-6281 (5) 199-6292 (2) 220-1337 5 (3) 220-9094

6I-6355/6 J350

6I-6355/6 J350

6I-6355/6 J350

6I-6355/6 J350

Bucket Type: RR — Rock Ripping T — Trenching GP — General Purpose * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Base edge assembly includes 107-3464 and (2) 107-3465. (2) 107-3466 must be ordered separately if replacing base edge assembly.

See sidecutter chart on page 3-66.

3-32

220-9095/6 K90

Excavators 300 SERIES

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Front — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

127-2274 127-2275 36" 914 HD 127-2282

142-2569 142-2576 36" 914 HD 127-5088

239-7548 239-7555 36" 914 HD 241-6726

134-1889 134-1899 36" 914 HDR 127-2282

150-4589 150-4590 36" 914 HDR 127-2282

150-4589 150-4590 36" 914 HDR 127-2282

127-5088 (4) 127-2281

127-5088 (4) 127-2281

(1) 241-6301 (4) 231-5957

134-1913 134-1914 (4) 134-1915

150-4595 (4) 134-1915

150-4595 (4) 134-1914 (4) 134-1915

4 (2) 6I-6404 6I-6405/6 J400

N/S 4 (2) 220-9104 220-9105/6 K100

(4) 134-1914 4 (2) 6I-6404 6I-6405/6 J400

4 (2) 6I-6404 6I-6405/6 J400

4 (2) 6I-6404 6I-6405/6 J400

4 (2) 6I-6404 6I-6405/6 J400

Bucket Type: HD — Heavy Duty HDR — Heavy Duty Rock * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

239-7562 239-7566 36" 914 HDR 241-6726 (1) (4) (3) (2)

241-6301 231-8068 231-8069 150-4593 4 (2) 220-9104 220-9105/6 K100

6I-5019 7Y-7698 37" 940 ET 6I-5281

6I-5011 7Y-7466 42" 1067 T 6I-5193

113-5799 113-1858 42" 1067 T 6I-5193

116-2017 116-2018 42" 1067 ET 126-3718

132-5053 135-5427 42" 1067 GP 6I-5193

128-9183 7Y-7707 (2) 7Y-7708

(3) 7Y-7538 (2) 7Y-7539

113-1860 (4) 111-6072

127-5089 (4) 123-3212

133-2245 (4) 111-6072

4 (2) 6I-6404 6I-6405/6 J400

5 (3) 6I-6354 6I-6355/6 J350

5 (3) 6I-6354 6I-6355/6 J350

5 (3) 6I-6404 6I-6405/6 J400

(2) 133-2242 5 (3) 6I-6354 6I-6355/6 J350

Bucket Type: HDR — Heavy Duty Rock ET — Extreme Service Trenching * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

T — Trenching

GP — General Purpose

See sidecutter chart on page 3-66.

3-33

Excavators 300 SERIES

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

153-0337 42" 1067 GP 6I-5193

233-0561 233-0552 42" 1067 GP 228-6953

142-2570 142-2577 42" 1067 HD 126-3718

239-7549 239-7556 42" 1067 HD 241-6727

239 7570 a 239-7574 42" 1067 HDP 241-6727

133-2245 (4) 111-6072

(1) 199-6278 (5) 199-6294

(4) 123-3212

(1) 241-6302 (4) 231-5958

(1) 198-2767 (5) 198-5212

Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

(2) 133-2242 5 (3) 6I-6354 6I-6355/6 J350

(2) 220-1337 5 (3) 220-9094 220-9095/6 K90

5 (3) 6I-6404 6I-6405/6 J400

N/S 5 (3) 220-9104 220-9105/6 K100

(2) 198-5208 5 (3) 220-9104 220-9105/6 K100

239-7563 239-7567 42" 1067 HDR 241-6727 (1) (4) (3) (2)

241-6302 231-8070 231-8071 150-4593 5 (3) 220-9104 220-9105/6 K100

Bucket Type: GP — General Purpose HD — Heavy Duty HDP — Heavy Duty Power HDR — Heavy Duty Rock * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

134-1890 134-1900 42" 1067 HDR 126-3718

150-4596 150-4597 42" 1067 HDR 126-3718

150-4596 150-4597 42" 1067 HDR 126-3718

134-1916 (4) 134-1917

150-4598 (4) 134-1917 (4) 134-1918

150-4598 (4) 134-1918

Front — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

(4) 134-1918 5 (3) 6I-6404 6I-6405/6 J400

(2) 7Y-7558 (2) 7I-3381

7I-3856 7I-3434 48" 1219 T 7I-3379

132-5054 134-5428 48" 1219 GP 129-5714

7I-3383 (2) 7I-3382

133-2246 (4) 112-9696

5 (3) 6I-6354 6I-6355/6 J350

6 (4) 6I-6354 6I-6355/6 J350

(4) 134-1917 5 (3) 6I-6404 6I-6405/6 J400

Bucket Type: HDR — Heavy Duty Rock EX — Extreme Service Excavating * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

See sidecutter chart on page 3-66.

3-34

6I-5020 7Y-7733 47" 1195 EX 109-8554

5 (3) 6I-6404 6I-6405/6 J400 T — Trenching

5 (3) 6I-6404 6I-6405/6 J400

GP — General Purpose

Excavators 300 SERIES

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

153-0339 48" 1219 GP 129-5714

233-0562 233-0553 48" 1219 GP 225-6813

127-2284 127-2285 48" 1219 HD 127-2289

142-2571 142-2578 48" 1219 HD 127-2289

239-7550 239-7557 48" 1219 HD 241-6728

239-7571 a 239-7575 48" 1219 HDP 241-6728

133-2246 (4) 112-9696

(1) 199-6279 (5) 199-6295

127-2287 (4) 127-2288

127-2287 (4) 127-2288

(1) 241-6303 (4) 231-5959

(1) 198-8730 (5) 198-2768

Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

(2) 133-2242 6 (4) 6I-6354 6I-6355/6 J350

(2) 220-1337 6 (4) 220-9094 220-9095/6 K90

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 6I-6404 6I-6405/6 J400

N/S 5 (3) 220-9104 220-9105/6 K100

(2) 198-5208 5 (3) 220-9104 220-9105/6 K100

7Y-7400

7I-3857 7I-3435 54" 1372 T

Bucket Type: GP — General Purpose HD — Heavy Duty HDP — Heavy Duty Power * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

239-7564 239-7568 48" 1219 HDR 241-6728 (1) (4) (3) (2)

241-6303 241-6309 241-6310 150-4593 5 (3) 220-9104 220-9105/6 K100

134-1891 134-1901 48" 1219 HDR 127-2289

150-4599 150-4600 48" 1219 HDR 127-2289

150-4599 150-4600 48" 1219 HDR 127-2289 127-2290

134-1929

150-4601

150-4601

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 6I-6404 6I-6405/6 J400

Bucket Type: HDR — Heavy Duty Rock X — Excavating * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

53" 1345 X

7I-3361 (2) 5I-3453 6 (4) 6I-6354 6I-6355/6 J350

6 (4) 6I-6354 6I-6355/6 J350

T — Trenching

See sidecutter chart on page 3-66.

3-35

Excavators 300 SERIES

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly

113-5244 112-9698 54" 1372 T 6I-5248

Bottom Wear Strip Front — Flat Rear — Shaped

112-9700 (3) 112-9701

Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6 (4) 6I-6354 6I-6355/6 J350

6I-5012 5I-3444 54" 1372 X

6I-5021 7Y-7861 54" 1372 EMX 6I-5201 6I-5248

(2) 5I-3452 (2) 5I-3452

128-9191 7Y-7866 (2) 7Y-7867

6 (4) 6I-6354 6I-6355/6 J350

5 (3) 6I-6404 6I-6405/6 J400

Bucket Type: T — Trenching X — Excavating EMX — Extreme Service Mass Excavation * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

132-5055 135-5429 54" 1372 GP 129-5719 6I-5248

153-0341 54" 1372 GP 129-5719

233-0563 233-0554 54" 1372 GP 235-2498

133-2248 (4) 112-9701

133-2248 (4) 112-9701

(1) 204-6637 (5) 204-6638

(2) 133-2242 7 (5) 6I-6354 6I-6355/6 J350

(2) 133-2242 7 (5) 6I-6354 6I-6355/6 J350

(2) 220-1337 6 (4) 220-9094 220-9095/6 K90

GP — General Purpose

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

127-2291 127-2292 54" 1372 HD 127-2296

142-2572 142-2579 54" 1372 HD 127-2296

127-2294 (4) 127-2295

127-2294 (4) 127-2295

6 (4) 6I-6404 6I-6405/6 J400

6 (4) 6I-6404 6I-6405/6 J400

239-7551 239-7558 54" 1372 HD 241-6729 (1) 241-6304 (4) 231-5960 N/S 6 (4) 220-9104 220-9105/6 K100

239-7572 a 239-7576 54" 1372 HDP 241-6729

6I-5014 7Y-7592 57" 1450 MX 6I-5204

(1) 199-6282 (5) 199-6293 (2) 198-5208 6 (4) 220-9104 220-9105/6 K100

(3) 7Y-7599 (2) 7Y-7600

Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power MX — Mass Excavating X — Excavating * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

See sidecutter chart on page 3-66.

3-36

6 (4) 6I-6354 6I-6355/6 J350

6I-5013 5I-3335 58" 1475 X 6I-5198

6 (4) 6I-6354 6I-6355/6 J350

Excavators 300 SERIES

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

113-5920 113-5922 59" 1500 MX 113-5930

127-2298 127-2299 60" 1524 HD 127-2304

142-2573 142-2580 60" 1524 HD 127-2304

113-5928 (3) 113-5929

127-2302 (4) 127-2303

127-2302 (4) 127-2303

7 (5) 6I-6354 6I-6355/6 J350

7 (5) 6I-6404 6I-6405/6 J400

7 (5) 6I-6404 6I-6405/6 J400

239-7552 239-7559 60" 1524 HD 241-6730 (1) 241-6305 (4) 241-6307 N/S 7 (5) 220-9104 220-9105/6 K100

127-2306 127-2307 66" 1676 HD 127-2316

142-2574 142-2581 66" 1676 HD 127-2316

127-2314

127-2314

7 (5) 6I-6404 6I-6405/6 J400

7 (5) 6I-6404 6I-6405/6 J400

Bucket Type: MX — Mass Excavating HD — Heavy Duty * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side GET Bolt-On Cutting Edge Bolts Nuts Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

239-7553 239-7560 66" 1676 HD 242-1794

132-5056 66" 1676 DC 135-3165

6I-5022 7Y-7720 68" 1725 U 8R-2662

132-5057 72" 1829 DC 135-3167 a

197-6124† 197-6125 72" 1829 DC

231-8748 N/S 72" 1829 DC 232-2923

(1) 241-6306 (4) 241-6308 N/S

194-082 b

(2) 7Y-7670 (2) 7Y-7523

194-253 b

233-4238

(2) 174-8029 (6) 4J-9208 (6) 2J-3507

BOCE (2) 174-8029 (6) 4J-9208 (6) 2J-3507

7 (5) 220-9104 220-9105/6 K100

Bucket Type: HD — Heavy Duty DC — Ditch Cleaning * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Base edge only — no adapters. b Balderson Part # 1-800-255-2372. N/S = Non-Serviced

U — Utility

C FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Bolt-On Cutting Edge Bolts Nuts

197-6126 197-6127 74" 1880 DC 174-8026 (8) 5J-2409 (8) 2J-3505

198-1729† 198-3054 74" 1880 DC 174-8026 (8) 5J-2409 (8) 2J-3505

Bucket Type: DC — Ditch Cleaning * C Family Buckets require “C” Family Bucket linkage. ** Bucket group includes slack adjuster group. † Dedicated Coupler.

See sidecutter chart on page 3-66.

3-37

Excavators 300 SERIES

D FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Intermediate Adapters Corner Adapters (R/L) Tip Size***

210-6007 26" 660 HD† 210-6117

100-4191 100-4192 30" 762 ET 105-2532

210-6125 (5) 210-6126 3 159-0464

(3) 100-4356 (2) 100-4355 3 159-0464

159-0465/6 J460

159-0465/6 J460

Bucket Type: HD — Heavy Duty ET — Extreme Service Trenching * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Balderson Part # 1-800-255-2372. † Dedicated Coupler.

129-9619

132-5043

30" 762 R 191-628 a

3 159-0464 159-0465/6 J460 R — Rock

30" 762 GP 105-2532

221-3377 198-0949 30" 762 GP 105-2532

239-7587 239-7593 30" 762 GP 241-6725

118-8713 (4) 118-8714 3 159-0464

(1) 197-8289 (5) 197-8293 3 159-0464

(1) 204-9686 (6) 223-5840 3 220-9104

159-0465/6 J460

159-0465/6 J460

220-9105/6 K100

166-7974 166-7976 30" 762 HDR 105-2532

251-6835 251-6840 30" 762 HDR 258-4571

GP — General Purpose

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

128-3141 128-2933 30" 762 HD 105-2532

142-2582 142-2590 30" 762 HD 105-2532

128-2942 (3) 128-2945

128-2942 (3) 128-2945

3 159-0464 159-0465/6 J460

3 159-0464 159-0465/6 J460

Bucket Type: HD — Heavy Duty HDR — Heavy Duty Rock * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. † Dedicated Coupler. N/S = Non-Serviced

3-38

251-6819 251-6827 30" 762 HD 258-4571 (1) 256-3026 (6) 258-6446 (1) 258-6454 3 (1) 232-0114 232-0115/6 K110

212-4744 30" 762 HD† 105-2532 128-2942 (3) 128-2945 3 159-0464 159-0465/6 J460

N/S (5) 147-6643 N/S 3 159-0464 159-0465/6 J460

(1) 256-3026 (4) 256-3041 (6) 258-8028 3 (1) 232-0114 232-0115/6 K110

Excavators 300 SERIES

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Intermediate Adapters Corner Adapters (R/L) Tip Size***

222-6789

6I-5028 7Y-9113 35" 890 RR 6I-5663 a

30" 762 HDR† 105-2532 N/S (5) 222-8851 (2) 222-8850 3 159-0464 159-0465/6 J460

142-4284 142-4289 35" 890 RR 142-4293 a

(3) 7Y-9121

(3) 132-5038

5 107-3464 (2) 107-3465 (2) 107-3466 J460

5 107-3464 (2) 107-3465 (2) 107-3466 J460

7I-4197 7I-3432 36" 914 ET 105-2533

120-7009

132-5044

36" 914 R 191477 b

36" 914 GP 105-2533

(3) 100-4364 (2) 100-4363

119-0034 (4) 119-0035

3 159-0464

3 159-0464

3 159-0464

159-0465/6 J460

159-0465/6 J460

159-0465/6 J460

Bucket Type: HDR — Heavy Duty Rock RR — Rock Ripping ET — Extreme Service Trenching R — Rock GP — General Purpose * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a The base edge assembly includes 107-3464 and (2) 107-3465. (2) 107-3466 must be ordered separately if replacing base edge assembly. b Balderson Part # 1-800-255-2372. † Dedicated Coupler.

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

221-3378 198-0951 36" 914 GP 105-2533

239-7588 239-7594 36" 914 GP 241-6726

128-3143 128-2935 36" 914 HD 105-2533

142-2583 142-2591 36" 914 HD 105-2533

(1) 175-4515 (5) 175-4518

(1) 246-2181 (6) 246-2183

128-2947 (3) 128-2949

128-2947 (3) 128-2949

3 159-0464 159-0465/6 J460

4 (2) 220-9104 220-9105/6 K100

3 159-0464 159-0465/6 J460

3 159-0464 159-0465/6 J460

251-6820 251-6828 36" 914 HD 258-4572 (1) 256-3027 (6) 258-6447 (1) 258-6455 4 (2) 232-0114 232-0115/6 K110

199-7657 a 199-7659 36" 914 HDP 199-7664 (1) 199-7668 (5) 199-7670 3 159-0464 168-1457/8 J460

Bucket Type: GP — General Purpose HD — Heavy Duty HDP — Heavy Duty Power * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers.

3-39

Excavators 300 SERIES

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

251-6845 a 251-6849 36" 914 HDP 258-4572 (1) 256-3027 (5) 256-3049

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

4 (2) 232-0114 232-0115/6 K110

160-7066 160-7067 36" 914 HDR 105-2533 (3) 160-7070 (5) 160-7069 3 159-0464 159-0465/6 J460

251-6836 251-6841 36" 914 HDR 258-4572 (1) 256-3027 (4) 256-3042 (6) 258-8029 4 (2) 232-0114 232-0115/6 K110

100-4193 100-4194 42" 1067 T 104-5747

132-5045 42" 1067 GP 104-5747

221-3379 198-0953 42" 1067 GP 128-2954

(3) 100-4283 (2) 100-4284

133-2261 (4) 117-8961

(1) 197-8291 (5) 197-8294

4 (2) 6I-6404 6I-6405/6 J400

5 (3) 6I-6404 6I-6405/6 J400

4 (2) 159-0464 159-0465/6 J460

Bucket Type: HDP — Heavy Duty Power HDR — Heavy Duty Rock T — Trenching GP — General Purpose * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers.

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

239-7589 239-7595 42" 1067 GP 241-6727

128-3144 128-2936 42" 1067 HD 128-2954

142-2584 142-2592 42" 1067 HD 128-2953

(1) 204-9687 (6) 223-5841

128-2951 (3) 128-2953

128-2951 (3) 128-2953

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

5 (3) 220-9104 220-9105/6 K100

4 (2) 159-0464 159-0465/6 J460

4 (2) 159-0464 159-0465/6 J460

Bucket Type: GP — General Purpose HD — Heavy Duty * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

251-6821 251-6829 42" 1067 HD 258-4573 (1) 256-3028 (6) 258-6448 (1) 258-6456 4 (2) 232-0114 232-0115/6 K110

134-5022 134-5025 42" 1067 HDR 128-2954

142-2585 142-2593 42" 1067 HDR 128-2954

134-1922

148-6509

4 (2) 159-0464 159-0465/6 J460

3 159-0464 159-0465/6 J460

HDR — Heavy Duty Rock

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

251-6837 251-6842 42" 1067 HDR 258-4573 (1) 256-3028 (4) 256-3043 (6) 258-8030 4 (2) 232-0114 232-0115/6 K110

203-0223 42" 1067 HDR† 128-2954 148-6509 (5) 134-1923 (2) 134-1924 4 (2) 159-0464 159-0465/6 J460

Bucket Type: HDR — Heavy Duty Rock T — Trenching * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. † Dedicated Coupler.

3-40

100-4195 100-4196 48" 1219 T 104-5748

117-9074 117-8962 48" 1219 T 104-5748

123-3545 123-3217 48" 1219 ET 123-3220 105-3569

(3) 100-4291 (2) 100-4292

117-8964 (3) 117-8965

128-2677 (3) 123-3219

133-2262 (4) 117-8965

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 159-0464 159-0465/6 J460

5 (3) 6I-6404 6I-6405/6 J400

ET — Extreme Service Trenching

GP — General Purpose

132-5046 48" 1219 GP 104-5748

Excavators 300 SERIES

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

221-3380 198-0954 48" 1219 GP 123-3220

239-7590 239-7596 48" 1219 GP 241-6728

142-2586 142-2594 48" 1219 HD 123-3220

(1) 169-2845 (5) 175-4526

(1) 205-2188 (6) 198-2768

128-2677 (3) 123-3219

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

5 (3) 159-0464 159-0465/6 J460

5 (3) 220-9104 220-9105/6 K100

5 (3) 159-0464 159-0465/6 J460

251-6822 251-6830 48" 1219 HD 258-4574 (1) 253-0982 (6) 258-6449 (1) 258-6457 5 (3) 232-0114 232-0115/6 K110

198-2739 a 198-2758 48" 1219 HDP 198-8625

251-6846 a 251-6850 48" 1219 HDP 258-4574

(1) 199-6272 (5) 199-6297

(1) 253-0982 (5) 253-0983

5 (3) 159-0464 168-1457/8 J460

5 (3) 232-0114 232-0115/6 K110

Bucket Type: GP — General Purpose HD — Heavy Duty HDP — Heavy Duty Power * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers.

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

134-5023 134-5026 48" 1219 HDR 123-3220

142-2587 142-2595 48" 1219 HDR 123-3220

134-5030 (5) 134-5031 (3) 134-5032 5 (3) 159-0464 159-0465/6 J460

148-6510 (3) 134-5032 (5) 134-5031 5 (3) 159-0464 159-0465/6 J460

251-6838 251-6843 48" 1219 HDR 258-4574 (1) 253-0982 (4) 256-3044 (6) 258-8031 5 (3) 232-0114 232-0115/6 K110

Bucket Type: HDR — Heavy Duty Rock EX — Extreme Service Excavating * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. † Dedicated Coupler.

212-4745 48" 1219 HDR† 123-3220 148-6510 (5) 134-5031 (3) 134-5032 5 (3) 159-0464 159-0465/6 J460

6I-5031 7Y-7763 51" 1295 EX 109-8560

7I-4198 7I-3431 54" 1372 T 104-5749

(3) 128-9204 (2) 7Y-7773

(3) 7I-3400 (2) 7I-3399

4 (2) 159-0464 159-0465/6 J460

5 (3) 6I-6404 6I-6405/6 J400

T — Trenching

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

198-2741 a 198-2759 54" 1372 HDP 198-8626

251-6847 a 251-6851 54" 1372 HDP 258-4575

(1) 199-6273 (5) 199-6298 5 (3) 159-0464 168-1457/8 J460

(1) 253-0812 (5) 253-0813 5 (3) 232-0114 232-0115/6 K110

117-8966 117-8967 55" 1397 EX 117-8975 117-8973 (3) 128-5353 5 (2) 159-0464 159-0465/6 J460

132-0547 198-0955 55" 1397 GP 117-8975 175-4537 (5) 175-4538 5 (3) 159-0464 159-0465/6 J400

132-5047 134-5027 55" 1397 GP 133-2321 133-2263 (4) 117-8974 5 159-0464 159-0465/6 J400

221-3381 198-0955 55" 1397 GP 117-8975 (1) 175-4537 (5) 175-4538 5 (3) 159-0464 159-0465/6 J460

Bucket Type: HDP — Heavy Duty Power EX — Extreme Service Excavating GP — General Purpose * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers.

3-41

Excavators 300 SERIES

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

239-7591 239-7597 55" 1397 GP 241-6729

142-2588 142-2596 55" 1397 HD 117-8975

218-9716 218-9717 55" 1397 HD 117-8975

(1) 205-2189 (6) 224-2134

117-8973 (5) 128-5353

(1) 117-8973 (3) 128-5323

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6 (4) 220-9104 220-9105/6 K100

5 (3) 159-0464 159-0465/6 J460

5 (3) 159-0464 159-0465/6 J460

Bucket Type: GP — General Purpose HD — Heavy Duty * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

251-6823 251-6831 55" 1397 HD 258-4575 (1) 253-0812 (6) 258-6450 (1) 258-6458 5 (3) 232-0114 232-0115/6 K110

134-5024 5I-3493 55" 1397 HDR 117-8975 134-5033 (5) 134-5034 5 (3) 159-0464 159-0465/6 J460

142-2589 142-2597 55" 1397 HDR 117-8975 148-6511 (5) 134-5034 (3) 134-5035 5 (3) 159-0464 159-0465/6 J460

HDR — Heavy Duty Rock

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

218-9718 218-9719 55" 1397 HDR 117-8975

251-6839 251-6844 55" 1397 HDR 258-4575

148-6511 (5) 134-5034 (3) 134-5035 5 (3) 159-0464 159-0465/6 J460

(1) 253-0812 (4) 256-3045 (6) 258-8032 5 (3) 232-0114 232-0115/6 K110

Bucket Type: HDR — Heavy Duty Rock X — Excavating * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. † Dedicated Coupler.

212-4746

6I-5025

55" 1397 HDR† 117-8975

56" 1420 X 117-8975

148-6511 (5) 134-5034 (2) 134-5035 5 (3) 159-0464 159-0465/6 J460

6I-5032 7Y-7786 57" 1450 EMX 109-8561

(2) 5I-3499 (2) 5I-3500

(3) 7Y-7791 (2) 7Y-7792

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 159-0464 159-0465/6 J460

EMX — Extreme Service Mass Excavation

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6I-5026 5I-3483 59" 1500 X 109-8556

6I-5027 7Y-7470 60" 1524 MX 109-8557

(2) 5I-3491 (2) 5I-3492 5 (3) 6I-6404 6I-6405/6 J400

(3) 7Y-7482 (2) 7Y-7483 6 (4) 6I-6404 6I-6405/6 J400

Bucket Type: X — Excavating MX — Mass Excavation * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

3-42

132-5048 60" 1524 GP 6I-5224 133-2264 (4) 133-8530 6 (4) 6I-6404 6I-6405/6 J400

GP — General Purpose

221-3382 198-0956 60" 1524 GP 128-5366 (1) 169-2848 (5) 169-2847 6 (4) 159-0464 159-0465/6 J460 HD — Heavy Duty

239-7592 239-7598 60" 1524 GP 241-6730 (1) 205-2190 (6) 224-2135 7 (5) 220-9104 220-9105/6 K100

128-5355 128-5358 60" 1524 HD 128-5366 128-5364 (3) 128-5365 6 (4) 159-0464 159-0465/6 J460

Excavators 300 SERIES

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

148-6484 148-6488 60" 1524 HD 128-5366

218-9722 218-9723 60" 1524 HD 128-5366

128-5364 (3) 128-5365

(1) 128-5364 (3) 128-5365

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6 (4) 159-0464 159-0465/6 J460

6 (4) 159-0464 159-0465/6 J460

251-6824 251-6832 60" 1524 HD 258-4576 (1) 256-3029 (6) 258-6451 (1) 258-6459 6 (4) 232-0144 232-0115/6 K110

210-6008 60" 1524 HD† 105-2532

198-2742 a 198-2760 60" 1524 HDP 198-8627

251-6848 a 251-6852 60" 1524 HDP 258-4576

128-2942 (3) 128-2945

(1) 199-6274 (5) 199-6299

(1) 256-3029 (5) 256-3051

6 (4) 159-0464 159-0465/6 J460

6 (4) 159-0464 168-1457/8 J460

6 (4) 232-0114 232-0115/6 K110

Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. † Dedicated Coupler.

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

128-5356 128-5371 66" 1676 HD 128-5379

148-6485 148-6489 66" 1676 HD 128-5379

218-9726 218-9727 66" 1676 HD 128-5379

128-5377 (3) 128-5378

128-5377 (3) 128-5378

(1) 128-5377 (3) 128-5378

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6 (4) 159-0464 159-0465/6 J460

6 (4) 159-0464 159-0465/6 J460

6 (4) 159-0464 159-0465/6 J460

251-6825 251-6833 66" 1676 HD 258-4577

132-5049 66" 1676 DC

(1) 256-3030 (6) 258-6452 (1) 258-6460 7 (5) 232-0114 232-0115/6 K110

6I-5033 7Y-7721 71" 1805 U 7Y-7731**** (2) 7Y-7729 (2) 7Y-7730

Bucket Type: HD — Heavy Duty DC — Ditch Cleaning U — Utility * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. **** Bolt-On options include an 8E-3562 Bolt-On Cutting Edge, (11) 3K-9770 Nuts and (11) 6V-6535 Bolts.

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

137-8674 213-8196 72" 1829 GP

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

7

J400

128-5357 128-5381 72" 1829 HD 128-5389

148-6486 148-6491 72" 1829 HD 128-5389

218-9728 218-9729 72" 1829 HD 128-5389

128-5387 (3) 128-5388

128-5387 (3) 128-5388

(1) 128-5387 (3) 128-5388

7 (5) 159-0464 159-0465/6 J460

7 (5) 159-0464 159-0465/6 J460

7 (5) 159-0464 159-0465/6 J460

Bucket Type: GP — General Purpose HD — Heavy Duty * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a Base edge only — no adapters.

251-6826 251-6834 72" 1829 HD 258-4578

132-5050 72" 1829 DC 135-3164 a

(1) 256-3031 (6) 258-6453 (1) 258-8027 7 (5) 232-0114 232-0115/6 K110

DC — Ditch Cleaning

3-43

Excavators 300 SERIES

D FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Bottom Wear Strip Front — Flat GET Bolt-On Cutting Edge Bolts Nuts

231-8750 231-8751 72" 1829 DC 232-2924

197-6144 197-6145 74" 1880 DC

234-1547 BOCE 174-8029

197-6197† 197-6141 74" 1880 DC

174-8026 (8) 8J-2935 (8) 2J-3505

174-8026 (8) 5J-2409 (8) 2J-3505

197-6195† 197-6146 84" 2135 DC

174-8027 (8) 1J-6762 (8) 2J-3506

Bucket Type: DC — Ditch Cleaning * D Family Buckets require “D” Family Bucket linkage. ** Bucket group includes slack adjuster group. † Dedicated Coupler.

E FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6I-5037 7Y-9147 59" 1500 EX 6I-5246

6I-5035 7Y-9141 63" 1600 X 6I-5240

128-9213 4I-7128 4 (2) 6I-6554 6I-6555/6 J550

124-3036 4I-4100 63" 1600 X 109-8486

128-9211 5 (3) 159-0464 159-0465/6 J460

Bucket Type: EX — Extreme Service Excavating X — Excavating * E Family Buckets require “E” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

(3) 4I-4112 (3) 4I-4113 6 (4) 159-0464 159-0465/6 J460

6I-5038 7Y-9148 64" 1625 EMX 6I-5247 (2) 4I-7136 (2) 4I-7135 4 (2) 6I-6554 6I-6555/6 J550

EMX — Extreme Service Mass Excavation

142-0885 136-6252 66" 1676 HD 137-4110 (1) 136-6294 (4) 128-5378 6 (4) 159-0464 159-0465/6 J460 HD — Heavy Duty

E FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

124-3037 7Y-9150 68" 1725 X 109-8487 (3) 101-2242 (2) 101-2243 6 (4) 159-0464 159-0465/6 J460

136-6245 136-6252 68" 1725 X 137-4110 136-6294 (4) 128-5378 6 (4) 159-0464 159-0465/6 J460

Bucket Type: X — Excavating MX — Mass Excavation * E Family Buckets require “E” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

3-44

6I-5036 7Y-9143 68" 1725 MX 6I-5241 (2) 4I-4067 (2) 4I-4068 6 (4) 159-0464 159-0465/6 J460

HD — Heavy Duty

138-8884 136-6253 72" 1829 HD 137-4111 (1) 136-6299 (4) 128-5388 7 (5) 159-0464 159-0465/6 J460

262-3813 251-6857 72" 1829 HD 244-3889 (1) 256-3031 (5) 256-3053 7 (5) 232-0114 232-0115/6 K110

262-3812 251-6856 66" 1676 HD 241-6723 (1) 256-3030 (5) 256-3052 7 (5) 232-0114 232-0115/6 K110

Excavators 300 SERIES

F FAMILY BUCKETS* Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

162-2914 148-7035 30" 762 GP 148-7038

163-6030 163-6034 30" 762 HDR N/S

(1) 150-5520 (4) 154-7210 3 159-0464 159-0465/6 J460

(1) 163-6040 (5) 147-6642 (2) 163-6042 3 159-0464 159-0465/6 J460

268-9029 268-9038 30" 762 HDR 241-6717 (1) 256-3026 (5) 256-3032 (2) 256-3041 3 (1) 232-0114 232-0115/6 K110

105-3596 105-3597 36" 914 ET 105-3611

145-8066 145-8072 36" 914 GP 137-4105

136-6240 136-6247 36" 914 HD 137-4105

(2) 105-3609 (3) 105-3610

145-8085 (4) 145-8086

136-6269 (4) 128-2949

3 6I-6554 6I-6555/6 J550

3 159-0464 159-0465/6 J460

3 159-0464 159-0465/6 J460

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock ET — Extreme Service Trenching HD — Heavy Duty * F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

F FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Intermediate Adapters Corner Adapters (R/L) Tip Size#

268-9027 268-9036 36" 914 HD 244-3895

199-7658 199-7661 36" 914 HDP 199-7665

159-0891 159-0892 36" 914 HDR 159-0897

(1) 256-3027 (5) 256-3049

(1) 199-7671 (6) 199-7672

(1) 159-0893 (5) 158-0896 (2) 159-0894 4 (2) 159-0464

4 (2) 232-0114 232-0115/6 K110

3 6I-6554 195-5095/6 J550

159-0465/6 J460

106-8854 109-1127 38" 965 RR 105-9716 a (3) 105-3610 5 107-8554 (2) 107-8555 (2) 107-8556 J550

105-3613 105-3614 42" 1067 ET 105-3622

145-8067 145-8073 42" 1067 GP 137-4106

(2) 105-3620 (3) 105-3621

145-8088 (4) 145-8089

3 6I-6554 6I-6555/6 J550

4 (2) 159-0464 159-0465/6 J460

Bucket Type: * ** *** # a

HD — Heavy Duty HDP — Heavy Duty Power HDR — Heavy Duty Rock RR — Rock Ripping ET — Extreme Service Trenching GP — General Purpose F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines. Bucket group includes slack adjuster group. Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. Additional tip options found in tip option chart on page 3-93. The Base Edge Assembly includes 107-8554 and (2) 107-8555. (2) 107-8556 must be ordered separately if replacing Base Edge Assembly.

3-45

Excavators 300 SERIES

F FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

136-6241 136-6248 42" 1067 HD 137-4106

136-6241 136-6348 42" 1067 HD 137-4106

134-5513 134-5516 42" 1067 HDR 105-3622

138-9672 138-7539 42" 1067 HDR 137-4106

105-3551 105-3552 48" 1219 T 105-3569

123-8784 123-4097 48" 1219 ET 123-4101

136-6274 (4) 128-2953

136-6274 (4) 128-2953

138-7545

(3) 105-3567 (3) 105-3568

123-4099

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

4 (2) 159-0464 159-0465/6 J460

134-5524 (6) 134-5525 (2) 134-5526 3 6I-6554 6I-6555/6 J550

4

J460

(2) 129-1538 4 (2) 159-0464 159-0465/6 J460

5 (3) 159-0464 159-0465/6 J460

4 (2) 6I-6554 6I-6555/6 J550

Bucket Type: HD — Heavy Duty HDR — Heavy Duty Rock T — Trenching ET — Extreme Service Trenching * F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93.

F FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

145-8068 145-8074 48" 1219 GP 137-4107

146-0221 146-0223 48" 1219 GP 146-0233

136-6242 136-6249 48" 1219 HD 137-4107

263-7329 251-6854 48" 1219 HD 241-6720

134-5514 134-5517 48" 1219 HDR 123-4101

145-8091 (4) 145-8092

146-0231 (4) 146-0232

136-6279 (4) 123-3219

(1) 253-0982 (5) 253-0983

134-5527 (6) 134-5528 (2) 134-5529

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

5 (3) 159-0464 159-0465/6 J460

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 159-0464 159-0465/6 J460

5 (3) 232-0114 232-0115/6 K110

4 (2) 6I-6554 6I-6555/6 J550

Bucket Type: GP — General Purpose HD — Heavy Duty HDR — Heavy Duty Rock * F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93.

3-46

138-9673 138-7540 48" 1219 HDR 137-4107 (2) (5) (2) (2)

138-7546 134-5031 134-5032 129-5713 5 (3) 159-0464 159-0465/6 J460

Excavators 300 SERIES

F FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

198-2743 198-2762 48" 1219 HDP 198-8628

268-9030 268-9039 48" 1219 HDR 241-6720

203-2602

(1) 199-6275 (6) 199-6300

(1) 253-0982 (5) 256-3036 (2) 256-3044

(1) (5) (2) (2)

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

4 (2) 6I-6554 195-5095/6 J550

5 (3) 232-0114 232-0115/6 K110

5 (3) 159-0464 159-0465/6 J460

48" 1219 HDR† 137-4107 138-7546 134-5031 134-5032 129-5713

105-3571 105-3572 54" 1372 T 105-3580

145-8069 145-8075 54" 1372 GP 137-4108

(3) 105-3578 (3) 105-3579

5 (3) 159-0464 159-0465/6 J460

136-6243 136-6250 54" 1372 HD 137-4108 136-6284 (4) 128-5353 (2) 134-5035

5 (3) 159-0464 159-0465/6 J460

(2) 129-5718 5 (3) 159-0464 159-0465/6 J460

Bucket Type: HDP — Heavy Duty Power HDR — Heavy Duty Rock T — Trenching GP — General Purpose HD — Heavy Duty * F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93. † Dedicated Coupler.

F FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

263-7330 251-6855 54" 1372 HD 241-6721

198-2744 198-2763 54" 1372 HDP 198-8629

(1) 253-0812 (5) 253-0813

(1) 199-6276 (6) 199-6301

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

5 (3) 232-0114 232-0115/6 K110

4 (2) 6I-6554 195-5095/6 J550

134-5515 134-5518 54" 1372 HDR 137-4108 138-8182 (5) 134-5034 (2) 134-5035 5 (3) 159-0464 159-0465/6 J460

122-9460 122-9461 60" 1524 T 122-9463

105-3582 105-3583 60" 1524 ET

136-6244 136-6251 60" 1524 HD 137-4109

122-8892 (3) 122-8831

123-4099

136-6289 (4) 128-5365

5 (3) 6I-6554 6I-6555/6 J550

6 (4) 159-0464 159-0465/6 J460

6 (4) 159-0464 159-0465/6 J460

Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power HDR — Heavy Duty Rock T — Trenching ET — Extreme Service Trenching * F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93.

3-47

Excavators 300 SERIES

F FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

268-9028 268-9037 60" 1524 HD 258-4574

198-2745 198-2764 60" 1524 HDP 198-8630

(1) 256-3029 (5) 256-3051

(1) 199-6277 (6) 199-6302

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

6 (4) 232-0114 232-0115/6 K110

5 (3) 6I-6554 195-5095/6 J550

163-6031 163-6035 60" 1524 HDR 137-4109 (1) (5) (2) (2)

163-6043 163-6044 163-6045 163-6046 6 (4) 159-0464 159-0465/6 J460

145-8070 145-8076 62" 1575 GP 145-8108

6I-5042 4I-4100 63" 1600 X 4I-4114

268-9026 268-9035 66" 1676 GP 241-6723

145-8099 (4) 145-8100

(3) 4I-4112 (2) 4I-4113

(1) 256-3030 (5) 258-8968

6 (4) 159-0464 159-0465/6 J460

6 (4) 159-0464 159-0465/6 J460

7 (5) 232-0114 232-0115/6 K110

Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power HDR — Heavy Duty Rock GP — General Purpose X — Excavating * F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93.

F FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

136-6245 136-6252 66" 1676 HD 137-4110

263-7331 251-6856 66" 1676 HD 241-6723

136-6294 (4) 128-5378

(1) 256-3030 (5) 256-3052

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

6 (4) 159-0464 159-0465/6 J460

7 (5) 232-0114 232-0115/6 K110

163-6032 163-6036 66" 1676 HDR 137-4110 (1) (5) (2) (2)

163-6047 163-6048 163-6049 163-6050 6 (4) 159-0464 159-0465/6 J460

6I-5043 7Y-9150 68" 1725 X 109-8487

145-8071 145-8077 68" 1725 GP 145-8109

251-6853 264-1139 72" 1829 GP 244-3889

(3) 101-2242 (2) 101-2243

145-8105 (4) 145-8106

(1) 253-4289 (5) 253-4290

6 (4) 159-0464 159-0465/6 J460

7 (5) 159-0464 159-0465/6 J460

7 (5) 232-0114 232-0115/6 K110

Bucket Type: HD — Heavy Duty HDR — Heavy Duty Rock X — Excavating GP — General Purpose * F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93.

3-48

Excavators 300 SERIES

F FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size# Bolt-On Cutting Edge Bolts Nuts

136-6246 136-6253 72" 1829 HD 137-4111

263-7332 251-6857 72" 1829 HD 244-3889

136-6299 (4) 128-5388

(1) 256-3031 (6) 256-3053

7 (5) 159-0464 159-0465/6 J460

7 (5) 232-0114 232-0115/6 K110

163-6033 163-6037 72" 1829 HDR 137-4111

197-6163 197-6164 76" 1930 DC

(1) (5) (2) (2)

163-6051 163-6052 163-6053 164-3536 7 (5) 159-0464 159-0465/6 J460 174-8028 (12) 4J-9208 (12) 2J-3507

Bucket Type: HD — Heavy Duty HDR — Heavy Duty Rock DC — Ditch Cleaning * F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets.

G FAMILY BUCKETS* Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

138-4714 138-4716 67" 1700 HD 138-4728

6I-5071 105-6215 74" 1880 VX 109-8492

6I-5050 4I-4071 75" 1905 MX

138-4726 (4) 138-4727

(2) 105-6219 (2) 105-6218

(3) 4I-4090 (3) 4I-4091

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

6 (4) 6I-6554 6I-6555/6 J550

6 (3) 105-6269 (3) 105-6270 J550

5 (3) 6I-6554 6I-6555/6 J550

6I-5050 113-2112 75" 1905 MX 109-8490

138-4687 138-4715 75" 1905 HD 138-2395

143-5412 143-5413 75" 1905 HDR 138-2395

(3) 4I-4090 (3) 4I-4091

138-2392 (4) 138-2393

5 (3) 6I-6554 6I-6555/6 J550

6 (4) 6I-6554 6I-6555/6 J550

143-5421 (5) 143-5422 (3) 143-5423 6 (4) 6I-6554 6I-6465/6 J550

Bucket Type: HD — Heavy Duty VX — V Type Excavation MX — Mass Excavation HDR — Heavy Duty Rock * G Family Buckets require “G” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93.

3-49

Excavators 300 SERIES

G/V FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

175-4504 175-4503 75" 1905 GP 180-8267

175-4508 175-4507 75" 1905 HDR 180-8267

(1) 180-8275 (6) 180-8276

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6 (4) 6I-6554 6I-6555/6 J550

(1) 180-8275 (6) 175-4561 (2) 175-4562 6 (4) 6I-6554 6I-6555/6 J550

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * G/V Family Buckets require “G/V” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

H FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Intermediate Adapters Corner Adapters (R/L) Tip Size***

100-6194 100-6195 42" 1067 ET 100-6197 (3) 105-2439 110-1572 3 6I-6604 6I-6605/6 J600

104-2111 100-8177 43" 1090 RR

(3) 145-2561 5 107-8604 (2) 107-8605 (2) 107-8606 J600

137-6257 137-6257 47" 1195 RR 142-4315 a (3) 145-2561 5 107-8604 (2) 107-8605 (2) 107-8606 J600

100-6192 100-6193 48" 1219 ET 100-6196

3 6I-6604 6I-6605/6 J600

100-5642 100-5643 54" 1372 T 107-9890 (3) 7Y-7857 (3) 7Y-7858 4 (2) 6I-6554 6I-6555/6 J550

Bucket Type: ET — Extreme Service Trenching RR — Rock Ripping T — Trenching * H Family Buckets require “H” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. a The Base Edge Assembly includes 107-8604 and (2) 107-8605. (2) 107-8606 must be ordered separately if replacing Base Edge Assembly.

H FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

104-2110 104-6835 71" 1805 X

128-6619 128-6620 78" 1980 T 108-1065

108-1035 108-1036 78" 1980 X 108-1065

128-6619 128-6620 78" 1980 X 108-1065

(3) 5I-8929 5I-8924 5 (3) 6I-6554 6I-6555/6 J550

128-6622 (3) 108-1042 6 (4) 6I-6554 6I-6555/6 J550

108-1041 (3) 108-1042 6 (4) 6I-6554 6I-6555/6 J550

108-1041 (3) 108-1042 6 (4) 6I-6554 6I-6555/6 J550

Bucket Type: X — Excavating T — Trenching * H Family Buckets require “H” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

3-50

100-5712 100-5713 60" 1524 T 100-5714 (3) 100-5717 (3) 100-5718 4 (2) 6I-6554 6I-6555/6 J550

Excavators 300 SERIES

HB FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

203-6975 203-6976 42" 1067 GP 206-9133

203-6973 203-6974 42" 1067 HDR 206-9133

206-9136 (5) 206-9140

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

3 (1) 6I-6604 159-0605/6 J600

206-9136 (4) 209-5686 (3) 209-5687 3 (1) 6I-6604 159-0605/6 J600

203-6979 203-6980 54" 1372 GP 206-9134 206-9137 (5) 206-9141 4 (2) 6I-6604 159-0605/6 J600

203-6977 203-6978 54" 1372 HDR 206-9134 206-9137 (4) 209-5679 (3) 209-5680 4 (2) 6I-6604 159-0605/6 J600

203-6983 203-6984 66" 1676 GP 206-9135 206-9138 (5) 206-9142 4 (2) 6I-6604 159-0605/6 J600

203-6981 203-6982 66" 1676 HDR 206-9135 206-9138 (4) 209-5681 (3) 209-5682 4 (2) 6I-6604 159-0605/6 J600

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * HB Family Buckets require “HB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

HB FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

203-6988 203-6989 78" 1981 GP 205-6045 206-9139 (5) 206-9143

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

5 (3) 6I-6604 159-0605/6 J600

203-6985 203-6987 78" 1981 HDR 205-6045 206-9139 (4) 207-6081 (3) 207-6088 5 (3) 6I-6604 159-0605/6 J600

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * HB Family Buckets require “HB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

J FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

100-7839 100-7840 60" 1524 T 101-9908

4 (2) 6I-6604 6I-6605/6 J600

100-7842 100-7843 66" 1676 T 101-9919

4 (2) 6I-6604 6I-6605/6 J600

Bucket Type: T — Trenching MX — Mass Excavation * J Family Buckets require “J” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

135-3706 135-3707 69" 1755 MX Reach 135-3715 135-3713 (3) 135-3714 5 (3) 113-9604 113-9605/6 J600

X — Excavating

143-9132 143-9127 69" 1755 MX Reach 135-3715 135-3713 (3) 135-3714 5 (3) 113-9604 113-9605/6 J600

104-1988 104-6840 80" 2030 X 107-9839 (3) 5I-8941 (3) 5I-8942 5 (3) 6I-6604 6I-6605 J600

104-1990 104-6845 81" 2055 VX

7I-6802 (3) 7I-6801 6 (3) 6I-8605/6 J600

VX — V Type Excavation

3-51

Excavators 300 SERIES

J FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

133-8862 133-8863 82" 2085 MX 133-8868

143-9133 143-9128 82" 2085 MX 133-8868

133-8871 (3) 133-8872 6 (4) 113-9604 113-9605/6 J600

133-8871 (3) 133-8872 6 (4) 113-9604 113-9605/6 J600

Bucket Type: MX — Mass Excavation X — Excavating * J Family Buckets require “J” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

104-1989 104-6842 87" 2210 X 107-9840 (3) 7I-0272 (3) 7I-0271 5 (3) 6I-6604 6I-6605/6 J600

133-8862 133-8863 87" 2210 X 133-8868 (3) 7I-0272 (3) 7I-0271 5 (3) 113-9604 113-9605/6 J600

104-1991 104-6847 88" 2235 VMX

143-9136 143-9131 89" 2261 VMX 126-9029

(2) 7I-6793 (2) 7I-6792 6

140-9006 (3) 140-9007 6

(3) 6I-8605/6 J600

(3) 132-4705/6 J700

VMX — V Type Mass Excavation

J FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Sidebar Protectors Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

104-1992 104-6844 94" 2388 MX

126-3606 126-3607 94" 2388 MX 119-3173

126-3615 (3) 126-3616 6 (4) 113-9604 113-9605/6 J600

126-3615 (3) 126-3616 (4) 1U-0740 7 (5) 113-9604 113-9605/6 J600

127-8956 127-0692 94" 2388 MX 119-3173 126-3615 (3) 126-3616 (4) 1U-0740 7 (5) 113-9604 113-9605/6 J600

143-9134 143-9129 94" 2388 MX 119-3173 126-3615 (4) 126-3616 (4) 1U-0740 7 (5) 113-9604 113-9605/6 J600

Bucket Type: MX — Mass Excavation * J Family Buckets require “J” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

J FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

173-6611 173-6612 94" 2388 MX 119-3173 (5) 126-3616 7 (5) 113-9604 113-9605/6 J600

Bucket Type: MX — Mass Excavation * J Family Buckets require “J” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

3-52

143-9135 143-9130 94" 2388 MX 119-3173 126-3615 (3) 126-3616 (4) 1U-0740 7 (5) 113-9604 113-9605/6 J600

173-6605 173-6606 94" 2388 MX 119-3173 (4) 126-3616 7 (5) 113-9604 113-9605/6 J600

Excavators 300 SERIES

JB FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Tip Size***

211-1492 211-1493 89" 2261 GP 228-7864

211-1488 211-1489 89" 2261 HDR 228-7864

226-6254 226-6255 89" 2261 HDR 226-2408

227-4038 227-4039 89" 2261 SR 227-4040

244-3903 244-3904 89" 2261 SR 245-3869

206-9999 207-0000 94" 2388 GP 228-7865

211-2769 (4) 211-2770 (2) 211-2771 6 (6) 222-7700 J700

211-2769 (3) 211-2770 (3) 211-2771 6 (6) 222-7700 J700

211-2769 (3) 211-2770 (3) 211-2771 5 (5) 6I-8804 J800

211-2769 (3) 211-2770 (3) 211-2771 5 (5) 6I-8804 J800

211-2769 (3) 211-2770 (3) 211-2771 5 (5) 222-7700 J800

204-9023 (4) 213-0077 (2) 204-2633 6 (6) 222-7700 J700

239-7701 239-7508 24" 610 HD 241-6724

129-9623

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * JB Family Buckets require “JB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

SR — Spade Rock

S FAMILY BUCKETS* Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

132-5065 24" 610 GP 104-2096 (3) 100-6479 3 6I-6354 6I-6355/6 J350

232-4530 232-4524 24" 610 GP 227-8740 (1) 209-5740 (5) 209-5741 (2) 220-1337 3 (1) 220-9094 220-9095/6 K90

129-5702 129-5703 24" 610 HD 104-2096

161-3331 161-3333 24" 610 HD 104-2096

127-8624 (3) 128-0700

127-8624 (3) 128-0700

3 6I-6354 6I-6355/6 J350

3 6I-6354 6I-6355/6 J350

(1) 241-6316 (4) 241-6317 N/S 3 (1) 220-9104 220-9105/6 K100

28" 710 R 190-725 a

3 6I-6404 6I-6405/6 J400

Bucket Type: GP — General Purpose HD — Heavy Duty R — Rock * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93. a Balderson Part # 1-800-255-2372. N/S = Non-Serviced

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

129-9624

132-5066

30" 762 R 190-597 a

30" 762 GP 105-2761 133-2243 (4) 100-4346

3 6I-6404 6I-6405/6 J400

3 6I-6404 6I-6405/6 J400

232-4531 232-4525 30" 762 GP 228-6951 (1) 198-8737 (5) 199-6291 (2) 220-1337 4 (2) 220-9094 220-9095/6 K90

108-5179 108-5180 30" 762 HD 105-2761

142-2554 142-2561 30" 762 HD 105-2761

127-5710 (4) 127-5711

127-5710 (4) 127-5711

3 6I-6404 6I-6405/6 J400

3 6I-6404 6I-6405/6 J400

239-7502 239-7509 30" 762 HD 241-6725 (1) 241-6300 (4) 231-5956 N/S 3 (1) 220-9104 220-9105/6 K100

Bucket Type: R — Rock GP — General Purpose HD — Heavy Duty * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93. a Balderson Part # 1-800-255-2372. N/S = Non-Serviced

3-53

Excavators 300 SERIES

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

142-2560 142-2567 30" 762 HDR 127-2289

162-3087 162-3089 30" 762 HDR 105-2761

150-4601 (4) 162-6894 (4) 162-6895 5 (3) 6I-6404 6I-6405/6 J400

3 6I-6404 6I-6405/6 J400

239-7515 239-7519 30" 762 HDR 241-6725 (1) (4) (3) (2)

241-6300 231-8066 231-8067 150-4593 3 (1) 220-9094 220-9095/6 K90

108-5183 108-5184 36" 914 T 6I-5280

132-5067 36" 914 GP 132-8418

232-4532 232-4526 36" 914 GP 228-6952

110-5921 (4) 113-7682

133-2244 (4) 113-7682

(1) 199-6281 (5) 199-6292

4 (2) 6I-6354 6I-6355/6 J350

5 (3) 6I-6354 6I-6355/6 J350

(2) 220-1337 5 (3) 220-9094 220-9095/6 K90

Bucket Type: HDR — Heavy Duty Rock T — Trenching GP — General Purpose * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93.

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

127-9445 127-9446 36" 914 HD 127-2282

142-2555 142-2562 36" 914 HD 127-2282

239-7503 239-7510 36" 914 HD 241-6726

134-1886 134-1896 36" 914 HDR 127-2282

134-1886 142-2567 36" 914 HDR 127-2282

142-2556 142-2563 36" 914 HDR 127-2282

127-5088 (4) 127-2281

127-2282 (4) 127-2281

(1) 241-6301 (4) 231-5957

134-1913 (4) 134-1914 (4) 134-1915

134-1913 (4) 134-1914 (4) 134-1915

150-4595 (4) 134-1914 (4) 134-1915

Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

4 (2) 6I-6404 6I-6405/6 J400

4 (2) 6I-6404 6I-6405/6 J400

N/S 4 (2) 220-9104 220-9105/6 K100

4 (2) 6I-6404 6I-6405/6 J400

4 (2) 6I-6404 6I-6405/6 J400

4 (2) 6I-6404 6I-6405/6 J400

Bucket Type: HD — Heavy Duty HDR — Heavy Duty Rock * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93. N/S = Non-Serviced

3-54

Excavators 300 SERIES

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

239-7516 239-7520 36" 914 HDR 241-6726 (1) (4) (3) (2)

241-6301 231-8068 231-8069 150-4593 4 (2) 220-9094 220-9095/6 K90

108-5185 108-5186 42" 1067 T 6I-5193

123-8625 123-8626 42" 1067 ET 126-3718 104-5747

132-5068

110-5922 (3) 111-6072

127-5089 123-3212

133-2245 (4) 111-6072 (4) 134-1918

5 (3) 6I-6354 6I-6355/6 J350

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 6I-6354 6I-6355/6 J350

232-4533 232-4527 42" 1067 GP 228-6953

123-8625 123-8626 42" 1067 HD 104-5747

(1) 199-6278 (5) 199-6924

113-1860 (4) 123-3212

(2) 220-1337 5 (3) 220-9094 220-9095/6 K90

5 (3) 6I-6404 6I-6405/6 J400

42" 1067 GP 6I-5193

Bucket Type: HDR — Heavy Duty Rock T — Trenching ET — Extreme Service Trenching GP — General Purpose * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93.

HD — Heavy Duty

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

123-8625 123-8626 42" 1067 HD 126-3718

142-2557 142-2564 42" 1067 HD 126-3718

239-7504 239-7511 42" 1067 HD 239-7504

127-5089 (4) 123-3212

127-5089 (4) 123-3212

(1) 241-6302 (4) 231-5958

Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 6I-6404 6I-6405/6 J400

N/S 5 (3) 220-9104 220-9105/6 K100

239-7523 a 239-7526 42" 1067 HDP 241-6727

134-1887 134-1897 42" 1067 HDR 126-3718

142-2448 142-2565 42" 1067 HDR 126-3718

(1) 198-2767 (5) 198-5212

134-1916 (4) 134-1917

150-4598 (4) 134-1917 (4) 134-1918

(2) 198-5208 5 (3) 220-9104 220-9105/6 K100

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 6I-6404 6I-6405/6 J400

Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power HDR — Heavy Duty Rock * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

3-55

Excavators 300 SERIES

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

239-7517 239-7521 42" 1067 HDR 241-6727 (1) (4) (3) (2)

241-6302 231-8070 231-8071 150-4593 5 (3) 220-9094 220-9095/6 K90

108-5187 108-5188 48" 1219 T 104-3436

132-5069 48" 1219 GP 129-5714

232-4534 232-4528 48" 1219 GP 225-6813

127-9448 127-9450 48" 1219 HD 127-2289

142-2559 142-2566 48" 1219 HD 127-2289

112-9695 (3) 112-9696

133-2246 (4) 112-9696

(1) 199-6279 (5) 199-6295

127-2287 (4) 127-2288

127-2287 (4) 127-2288

5 (3) 6I-6354 6I-6355/6 J350

6 (4) 6I-6354 6I-6355/6 J350

(2) 220-1337 6 (4) 220-9094 220-9095/6 K90

5 (3) 6I-6404 6I-6405/6 J400

5 (3) 6I-6404 6I-6405/6 J400

Bucket Type: HDR — Heavy Duty Rock T — Trenching GP — General Purpose HD — Heavy Duty * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93.

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

239-7505 239-7512 48" 1219 HD 239-7505

239-7524 a 239-7527 48" 1219 HDP 241-6728

(1) 241-6303 (4) 231-5959

(1) 198-8730 (5) 198-2768

Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

N/S 5 (3) 220-9104 220-9105/6 K100

(2) 198-5208 5 (3) 220-9104 220-9105/6 K100

134-1888 134-1898 48" 1219 HDR 127-2289

132-5070 54" 1372 GP 129-5719

232-4535 232-4529 54" 1372 GP 235-2498

127-9451 127-9452 54" 1372 HD 127-2296

134-1929 (4) 134-1930 (4) 134-1931

133-2248 (4) 112-9701

(1) 204-6637 (5) 204-6638

127-2294 (4) 127-2295

5 (3) 6I-6404 6I-6405/6 J400

7 (5) 6I-6354 6I-6355/6 J350

(2) 220-1337 6 (4) 220-9094 220-9095/6 K90

6 (4) 6I-6404 6I-6405/6 J400

Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power HDR — Heavy Duty Rock GP — General Purpose * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

3-56

Excavators 300 SERIES

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size#

153-5448 153-5451 54" 1372 HD 127-2296

239-7506 239-7513 54" 1372 HD 241-6729

127-2294 (4) 127-2295

(1) 241-6304 (4) 231-5960 N/S 6 (4) 220-9104 220-9105/6 K100

6 (4) 6I-6404 6I-6405/6 J400

239-7525 a 239-7528 54" 1372 HDP 241-6729

108-5189 108-5190 57" 1450 X 6I-5204

127-9456 127-9457 60" 1524 HD 127-2304

153-5449 153-5452 60" 1524 HD 127-2304

(1) 199-6282 (5) 199-6293 (2) 198-5208 6 (3) 220-9104 220-9105/6 K100

113-5245 (2) 113-5246

127-2302 (4) 127-2303

127-2302 (4) 127-2303

6 (4) 6I-6354 6I-6355/6 J350

7 (5) 6I-6404 6I-6405/6 J400

7 (5) 6I-6404 6I-6405/6 J400

Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power X — Excavating * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93. a Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Base Edge Assembly Base Edge Bottom Wear Strip Front — Flat Rear — Shaped Side Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size# GET Bolt-On Cutting Edge Bolts Nuts

239-7507 239-7514 60" 1524 HD 241-6730

231-8742 b N/S 60" 1524 DC

(1) 241-6305 (4) 241-6307 N/S 7 (5) 220-9104 220-9105/6 K100

132-5071

132-5072

62" 1575 DC 135-8634 a

72" 1829 DC 135-8635 a

231-8746 b N/S 72" 1829 DC

227-8203

232-2923

233-4237

233-4238

BOCE (2) 217-4849 (6) 4J-9208 (6) 2J-3507

BOCE (2) 174-8029 (6) 4J-9208 (6) 2J-3507

197-6087 197-6088 74" 1880 DC

174-8026 (8) 8J-2935 (8) 2J-3505

Bucket Type: HD — Heavy Duty DC — Ditch Cleaning * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. Parts Sales should use this part number to order buckets. # Additional tip options found in tip option chart on page 3-93. a Base edge — no adapters. b Increased pin spread for better breakout. Incompatible with most competitive pin grabber couplers. N/S = Non-Serviced

S FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly*** Width — inches mm Bucket Type Bolt-On Cutting Edge Bolts Nuts

198-1728† 197-6122 74" 1880 DC 174-8026 (8) 8J-2935 (8) 2J-3505

Bucket Type: DC — Ditch Cleaning * S Family Buckets require “S” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication. † Dedicated Coupler.

3-57

Excavators 300 SERIES

S/C FAMILY BUCKETS* Bucket Group** Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

253-8142 36" 914 HDR† 241-6726

253-8242 42" 1067 HDR† 241-6727

(1) 241-6301 (4) 231-8068 (3) 231-8069 4 (2) 220-9104 220-9105/6 K100

(1) 241-6302 (4) 231-8070 (3) 231-8071 5 (3) 220-9104 220-9105/6 K100

206-1201 60" 1524 HD† 127-2304

225-0094 66" 1676 HD† 127-2316

(1) 127-2302 (4) 127-2303

(1) 127-2314 (4) 127-2315

7 (5) 6I-6404 6I-6405/6 J400

7 (5) 6I-6404 6I-6405/6 J400

Bucket Type: HDR — Heavy Duty Rock HD — Heavy Duty * S/C Family Buckets require “S/C” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93. † Dedicated Coupler.

TB FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

257-7357 257-7412 30" 762 GP 241-6717

251-6919 251-6927 30" 762 HDR 241-6717

(1) 256-3026 (5) 258-8962 (1) 256-7955 3 (1) 232-0114 232-0115/6 K110

257-7358 257-7413 36" 914 GP 244-3895

(1) 256-3026 (5) 256-3032 (2) 256-3041 3 (1) 232-0114 232-0115/6 K110

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * TB Family Buckets require “TB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

257-7324 257-7342 36" 914 HD 244-3895

(1) 256-3027 (5) 258-8963 (1) 256-7956 4 (2) 232-0114 232-0115/6 K110

(1) 256-3027 (5) 256-3049 4 (2) 232-0114 232-0115/6 K110

251-6920 251-6928 36" 914 HDR 244-3895 (1) 256-3027 (5) 256-3033 (2) 256-3042 4 (2) 232-0114 232-0115/6 K110

257-7359 257-7414 42" 1067 GP 241-6719 (1) 256-3028 (5) 258-8964 (1) 259-2242 4 (2) 232-0114 232-0115/6 K110

HD — Heavy Duty

TB FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

257-7325 257-7343 42" 1067 HD 241-6719 (1) 256-3028 (5) 256-3050

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

4 (3) 232-0114 232-0115/6 K110

251-6921 251-6929 42" 1067 HDR 241-6719 (1) 256-3028 (5) 256-3035 (2) 256-3043 4 (2) 232-0114 232-0115/6 K110

Bucket Type: HD — Heavy Duty HDR — Heavy Duty Rock * TB Family Buckets require “TB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

3-58

257-7360 257-7415 48" 1219 GP 241-6720 (1) 253-0982 (5) 258-8965 (1) 258-8969 5 (3) 232-0114 232-0115/6 K110

GP — General Purpose

257-7326 257-7344 48" 1219 HD 241-6720

257-7420 257-7423 48" 1219 HDP 253-9075

(1) 253-0982 (5) 253-0983

(1) 253-0982 (5) 253-0983

5 (3) 232-0114 232-0115/6 K110

4 (2) 232-0130 232-0131/2 K130

HDP — Heavy Duty Power

251-6922 251-6930 48" 1219 HDR 241-6720 (1) 253-0982 (5) 256-3036 (2) 256-3044 5 (3) 232-0114 232-0115/6 K110

Excavators 300 SERIES

TB FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

257-7361 257-7416 54" 1372 GP 241-6721 (1) 253-0812 (5) 258-8966 (1) 258-8970 5 (3) 232-0114 232-0115/6 K110

257-7327 257-7345 54" 1372 HD 241-6721

257-7421 257-7424 54" 1372 HDP 253-9076

(1) 253-0812 (5) 253-0813

(1) 253-0812 (5) 253-0813

5 (3) 232-0114 232-0115/6 K110

4 (2) 232-0130 232-0131/2 K130

Bucket Type: GP — General Purpose HD — Heavy Duty * TB Family Buckets require “TB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

HDP — Heavy Duty Power

251-6923 251-6931 54" 1372 HDR 241-6721 (1) 253-0812 (5) 256-3037 (2) 256-3045 5 (3) 232-0114 232-0115/6 K110

257-7362 257-7417 60" 1524 GP 241-6722 (1) 256-3029 (5) 258-8967 (1) 258-8971 6 (4) 232-0114 232-0115/6 K110

257-7328 257-7346 60" 1524 HD 241-6722 (1) 256-3029 (5) 256-3051 6 (4) 232-0114 232-0115/6 K110

HDR — Heavy Duty Rock

TB FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

257-7422 257-7425 60" 1524 HDP 253-9077

251-6924 251-6932 60" 1524 HDR 241-6722

(1) 256-3029 (5) 256-3051

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

5 (3) 232-0130 232-0131/2 K130

(1) 256-3029 (5) 256-3038 (2) 256-3046 6 (4) 232-0114 232-0115/6 K110

Bucket Type: HDP — Heavy Duty Power HDR — Heavy Duty Rock * TB Family Buckets require “TB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

257-7363 257-7418 66" 1676 GP 241-6723 (1) 256-3030 (5) 258-8968 (1) 258-8972 7 (5) 232-0114 232-0115/6 K110 GP — General Purpose

257-7329 257-7347 66" 1676 HD 241-6723 (1) 256-3030 (5) 256-3052 7 (5) 232-0114 232-0115/6 K110

251-6925 251-6933 66" 1676 HDR 241-6723 (1) 256-3030 (5) 256-3039 (2) 256-3047 7 (5) 232-0114 232-0115/6 K110

257-7364 257-7419 72" 1829 GP 244-3889 (1) 253-4289 (5) 253-4290 (1) 256-3031 7 (5) 232-0114 232-0115/6 K110

HD — Heavy Duty

TB FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

257-7330 257-7348 72" 1829 HD 244-3889 (1) 256-3031 (5) 256-3053

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

7 (5) 232-0114 232-0115/6 K110

251-6926 251-6934 72" 1829 HDR 244-3889 (1) 256-3031 (5) 256-3040 (2) 256-3048 7 (5) 232-0114 232-0115/6 K110

Bucket Type: HD — Heavy Duty HDR — Heavy Duty Rock * TB Family Buckets require “TB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

3-59

Excavators 300 SERIES

UB FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

263-9746 263-9750 75" 1905 HD 265-3376

263-9748 263-9752 75" 1905 HDR-S 265-3400

(1) 265-3406 (5) 265-3407

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6 (4) 232-0130 232-0131/2 K130

(1) 265-3406 (5) 265-3410 (2) 265-3411 6 (6) 232-0130 K130

Bucket Type: HD — Heavy Duty HDR-S — Heavy Duty Rock – Spade * UB Family Buckets require “UB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

V FAMILY BUCKETS Bucket Group Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size*

175-4480 175-4479 36" 914 GP 175-4514

175-4482 175-4481 36" 914 HD 175-4514

175-4484 175-4483 36" 914 HDR 175-4514

175-4486 175-4485 48" 1219 GP 183-4098

175-4554 175-4553 48" 1219 HD 183-4098

175-4488 175-4487 48" 1219 HDR 183-4098

175-4515 (6) 175-4518

175-4515 (7) 175-4519

169-2845 (6) 175-4526

169-2845 (7) 169-2844

3 6I-6554 6I-6555/6 J550

3 6I-6554 6I-6555/6 J550

175-4515 (6) 175-4520 (2) 175-4521 3 6I-6554 6I-6555/6 J550

4 (2) 6I-6554 6I-6555/6 J550

4 (2) 6I-6554 6I-6555/6 J550

169-2845 (6) 175-4527 (2) 175-4528 4 (2) 6I-6554 6I-6555/6 J550

Bucket Type: GP — General Purpose HD — Heavy Duty * Additional tip options found in tip option chart on page 3-93.

HDR — Heavy Duty Rock

V FAMILY BUCKETS — Continued Bucket Group Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

175-4490 175-4489 55" 1397 GP 175-4534

175-4492 175-4491 55" 1397 HD 175-4534

175-4494 175-4493 55" 1397 HDR 175-4534

175-4556 175-4555 60" 1524 GP 183-4096

175-4496 175-4495 60" 1524 HD 183-4096

175-4498 175-4497 60" 1524 HDR 183-4096

175-4537 (6) 175-4538

175-4537 (7) 175-4539

175-4537 (6) 175-4540 (2) 175-4541

169-2848 (6) 169-2847

169-2848 (7) 175-4543

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size*

4 (2) 6I-6554 6I-6555/6 J550

4 (2) 6I-6554 6I-6555/6 J550

4 (2) 6I-6554 6I-6555/6 J550

5 (3) 6I-6554 6I-6555/6 J550

5 (3) 6I-6554 6I-6555/6 J550

169-2848 (6) 175-4544 (2) 175-4545 (2) 183-5144 5 (3) 6I-6554 6I-6555/6 J550

Bucket Type: GP — General Purpose HD — Heavy Duty * Additional tip options found in tip option chart on page 3-93.

3-60

HDR — Heavy Duty Rock

Excavators 300 SERIES

V FAMILY BUCKETS — Continued Bucket Group Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

175-4500 175-4499 66" 1676 GP 183-4097

175-4558 175-4557 66" 1676 HD 183-4097

175-4502 175-4501 66" 1676 HDR 183-4097

175-4504 175-4503 75" 1905 GP 180-8267

175-4506 175-4505 75" 1905 HD 180-8267

175-4508 175-4507 75" 1905 HDR 180-8267

165-6234 (6) 175-4547

165-6234 (7) 165-6236

180-8275 (6) 180-8276

180-8275 (7) 175-4560

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size*

5 (3) 6I-6554 6I-6555/6 J550

5 (3) 6I-6554 6I-6555/6 J550

165-6234 (6) 175-4548 (2) 175-4549 (2) 183-5145 5 (3) 6I-6554 6I-6555/6 J550

6 (4) 6I-6554 6I-6555/6 J550

6 (4) 6I-6554 6I-6555/6 J550

180-8275 (6) 175-4561 (2) 175-4562 (2) 183-5146 6 (4) 6I-6554 6I-6555/6 J550

Bucket Type: GP — General Purpose HD — Heavy Duty * Additional tip options found in tip option chart on page 3-93.

HDR — Heavy Duty Rock

VB FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

222-5252 222-5253 40" 1016 GP 223-2375

222-5250 222-5251 40" 1016 HDR 223-2375

222-5254 222-5255 48" 1219 HD 183-4098

222-5258 222-5259 60" 1524 GP 183-4096

222-5256 222-5257 60" 1524 HDR 183-4096

222-5260 222-5261 66" 1676 HD 183-4097

(1) 223-3920 (5) 227-9874 (1) 224-0002 3 (1) 6I-6554 6I-6556/5 J550

(1) 223-3920 (6) 223-3923 (3) 223-3922 3 (1) 6I-6554 6I-6556/5 J550

(1) 169-2845 (6) 169-2844 (1) 223-7816 4 (2) 6I-6554 6I-6556/5 J550

(1) 169-2848 (5) 169-2847 (1) 223-9812 5 (3) 6I-6554 6I-6556/5 J550

(1) 169-2848 (6) 175-4544 (3) 175-4545 5 (3) 6I-6554 6I-6556/5 J550

(1) 169-2848 (5) 169-2847 (1) 223-9812 5 (3) 6I-6554 6I-6556/5 J550

Bucket Type: GP — General Purpose HDR — Heavy Duty Rock * VB Family Buckets require “VB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

HD — Heavy Duty

VB FAMILY BUCKETS* — Continued Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped

222-5266 222-5267 75" 1905 GP 180-8267

222-5262 222-5263 75" 1905 HD 180-8267

222-5264 222-5265 75" 1905 HDR 180-8267

(1) 180-8275 (6) 180-8276

Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

6 (4) 6I-6554 6I-6556/5 J550

(1) 180-8275 (6) 175-4560 (1) 223-7818 6 (4) 6I-6554 6I-6556/5 J550

(1) 180-8275 (6) 175-4561 (1) 175-4562 6 (4) 6I-6554 6I-6556/5 J550

Bucket Type: GP — General Purpose HD — Heavy Duty * VB Family Buckets require “VB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

HDR — Heavy Duty Rock

3-61

Excavators 300 SERIES

W FAMILY BUCKETS Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Transverse Wear Strip Bottom Longitudinal Wear Strip Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size*

173-5724 79" 2007 Extreme Excavation 174-8631 (7) 174-8641 (2) 160-9089 4 (2) 6I-6604 6I-6605/6 J600

173-5727 79" 2007 Spade Rock 174-8636 (7) 174-8644 (2) 167-9082 4 (2) 6I-8605/6 J600

* Additional tip options found in tip option chart on page 3-93.

WB FAMILY BUCKETS* Bucket Group** Bucket Assembly Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size***

223-1933 223-1917 79" 2007 HD 174-8631

223-1937 223-1921 79" 2007 SR 230-5255

223-1928 223-1912 89" 2261 GP 174-5099

(7) 223-4144 4 (2) 6I-6604 6I-6605/6 J600

(7) 223-4148 4 (4) 6I-8604

(7) 223-4139 5 (3) 6I-6604 6I-6605/6 J600

J600

Bucket Type: HD — Heavy Duty SR — Spade Rock GP — General Purpose * WB Family Buckets require “WB” Family Bucket linkage. ** Bucket group includes slack adjuster group. *** Additional tip options found in tip option chart on page 3-93.

3-62

173-5720 89" 2261 Excavation 174-5099 (7) 174-5102 (2) 174-8638 5 (3) 6I-6604 6I-6605/6 J600

Excavators 300 SERIES

QUICK COUPLER BUCKETS Bucket Group* Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size**

127-1779 29" 735 T 108-5791

106-8899 36" 914 T 6I-5280

107-2588 42" 1067 T 6I-5193

107-7096 (3) 107-7097 3 6I-6354 6I-6355/6 J350

(3) 7Y-7609 4 (2) 6I-6354 6I-6355/6 J350

108-6227 (3) 7Y-7539 5 (3) 6I-6354 6I-6355/6 J350

Bucket Type: T — Trenching * Bucket group includes slack adjuster group. ** Additional tip options found in tip option chart on page 3-93.

QUICK COUPLER BUCKETS — Continued Bucket Group* Width — inches mm Bucket Type Base Edge Assembly Bottom Wear Strip Front — Flat Rear — Shaped Number of Teeth Center Adapters Corner Adapters (R/L) Tip Size**

106-8773 48" 1219 X 104-5748

106-4514 54" 1372 X 104-5749

(2) 100-4291 (2) 100-4292 5 (3) 6I-6404 6I-6405/6 J400

(2) 7I-3400 (2) 7I-3399 5 (3) 6I-6404 6I-6405/6 J400

108-4116 60" 1524 U 108-4127 a***

106-8767 60" 1524 X 6I-5224 (2) 7Y-7482 (2) 7Y-7483 6 (4) 6I-6404 6I-6405/6 J400

Bucket Type: X — Excavating U — Utility * Bucket group includes slack adjuster group. ** Additional tip options found in tip option chart on page 3-93. *** Bolt-On options include 107-3384 Bolt-On Cutting Edge with (9) 3K-9770 Nuts and (9) 6V-6535 Bolts. a Base edge only — no adapters.

QUICK COUPLER LINKAGES B Family B Family C Family D Family D Family S Family

Manual Hydraulic Manual Manual Hydraulic Manual

108-1146**

117-3517**

* For use with 300 “A” Series machines only. ** Can use on 300 A & B Series machines.

3-63

Excavators 245

TRENCHING/EXCAVATING/ROCK BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Corners (R/L) Center Adapters Corner Adapters (R/L) Tip Size**

8K-1556 a 3V-9729 a 4V-8999 a 36" 914 T

8K-1557 a 3V-9730 a 4V-9000 a 42" 1067 T

8R-0320 b 8R-1949 b

8R-0982 8K-4407/9

8R-0982 8K-4407/9

8K-4407/9

8R-0982 8K-4407/9

8K-4407/9

6I-6554 6I-6555/6 J550

6I-6554 6I-6555/6 J550

(2) 6I-6554 6I-6555/6 J550

6I-6554 6I-6555/6 J550

(2) 6I-6554 6I-6555/6 J550

42" 1067 T 8R-0343

8K-1558 a 3V-9106 a 4V-9001 a 48" 1219 T

8R-0769 b

5V-5075

48" 1219 X 8R-0783

51" 1295 R 5V-5081 7V-5700–R 5V-5090–L (4) 3G-9494 J550

Bucket Type: T — Trenching X — Excavating R — Rock * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-66 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-66 for use on buckets with horizontal wear strips column.

TRENCHING/EXCAVATING/ROCK BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Corners (R/L) Center Adapters Corner Adapters (R/L) Tip Size**

8K-1559 a 4V-9002 a 54" 1372 T 8R-0982 8K-4407/9 (3) 6I-6554 6I-6555/6 J550

8R-0785 b 3V-9105 a

1V8337 a 3V-9104 a 4V-9003 a 60" 1524 T

54" 1372 X 8R-0794 8K-4407/9 (3) 6I-6554 6I-6555/6 J550

8R-0982 8K-4407/9 (3) 6I-6554 6I-6555/6 J550

Bucket Type: T — Trenching X — Excavating * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-66 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-66 for use on buckets with horizontal wear strips column.

3-64

4V2933 a

8R-0963 b

4V-3370 a

67" 1700 X

68" 1725 X 8R-0981

75" 1905 X

8R-0982 8K-4407/9 (3) 6I-6554 6I-6555/6 J550

8K-4407/9 (3) 6I-6554 6I-6555/6 J550

9V-2323 8K-4407/9 (4) 6I-6554 6I-6555/6 J550

Excavators 245

TRENCHING/EXCAVATING/ROCK BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Corners (R/L) Sidebars Center Adapters Corner Adapters (R/L) Tip Size**

8V-5504 a

8R-0983 b

4E4573

4E-9635

103-8807

80" 2030 X

81" 2055 X 8R-0992

82" 2085 RE 9V-5067

85" 2160 RE

85" 2160 MX-R 103-4715

9V-2323 8K-4407/9

8K-4407/9

9V-2323

(4) 6I-6554 6I-6555/6 J550

(4) 6I-6554 6I-6555/6 J550

9V-2352/1 (6) 1U-1354

(6) 6I-5554

J350

J550

(3) 6I-8605/6 J600

Bucket Type: X — Excavating RE — Rehandling MX — Mass Excavation R — Rock * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-66 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-66 for use on buckets with horizontal wear strips column.

MASS EXCAVATION (MX) BUCKETS Standard Bucket and Bearing Assembly Bucket Type Base Edge Assembly Center Adapters Tip Size*

9V-2326 MX-GP 9V-2323 a (6) 6I-6554 J550

Bucket Type: MX — Mass Excavation * Tip options available on page 3-93. a Base edge only — no adapters.

9V-5068 MX-LM 9V-5067 (6) 1U-1354 J350

GP — General Purpose

LM — Light Material

3-65

Excavators 245

FRONT SHOVEL BUCKETS Standard Bucket and Bearing Assembly

3V-5300 3V-9624 3V-5394 3V-9283 Front Dump Bottom Dump (3) 3G-9495/6 (3) 3G-9495/6 J550 J550

Bucket Type Adapters (R/L) Tip Size**

* Consists of edge and 3 right and 3 left adapters. ** See tip options chart on page 3-93 for other tip part numbers.

SIDECUTTERS FOR TRENCHING AND EXCAVATING BUCKETS Sidecutter Type

Digging Conditions

Additional Bite Width Vertical Horizontal Wear Strips Wear Strips inch mm inch mm

Strike-Off Blade Combination Tooth

Any Average Moderate Tough

None 3 6 8

None 75 150 200

N/A N/A 1.7 2.0

R/L

Tip*/ Blade

Bolt

None (2) 8J-5188 N/A (4) 1J-5607 a None 8J-9825/6 N/A (10) 4J-9208 a 45 8J-9825/6 (2) 4T-6664 (18) 4J-9208 a 50 8J-4947/8 9W-8552 (10) 4J-9208 a

Hardware Nut

Washer

(4) 2J-3507 (10) 2J-3507 (10) 5P-8250 (18) 2J-3507 (10) 5P-8250 (18) 2J-3507 (10) 5P-8250

* Other tip options see page 3-93. a Use this plow bolt if bucket has router plate 8K-4407/9; otherwise use standard bolts (1D-4637 for Strike-Off; 8H-5772 for other sidecutter types).

SIDECUTTERS FOR “B” AND “C” LINKAGE BUCKETS Heavy Duty RH LH Bolts (8) Nuts (8) Washers (8) Blade Bolts Nuts Tip Pin Retainer Assembly

112-2487 112-2488 1D-4635 2J-3507 3K-5234

One Piece 7Y-0357 7Y-0358 (6) 1D-4635 (6) 2J-3507

Strikeoff 174-8043 174-8044 (4) 1D-4635 (4) 2J-3507

Blade 8J-9615 8J-9614 (6) 7Y-2146 (6) 2J-3507

Combination 8J-9615 8J-9614 (6) 7Y-2146 (6) 2J-3507

Tooth 8J-4951 8J-4952 (6) 7Y-2146 (6) 2J-3507

(2) 4T-2886 (8) 1J-6762 (8) 2J-3506 J350 114-0358 114-0359

SIDEBAR PROTECTORS FOR “B” AND “C” LINKAGE HD AND HDR BUCKETS* RH LH Pin Nuts

(2) (2) (8) (8)

112-2489 112-2489 112-2490 132-0999

* HD and HDR bucket sidebars can accept one or two sidebar protectors or a sidecuter in the lower position and a sidebar protector in the upper position.

3-66

Excavators 235

TRENCHING, EXCAVATING, ROCK AND EXTREME SERVICE BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Corners (R/L) Sidebars Center Adapters♦ Intermediate Adapters Corner Adapters (R/L)♦ Tip Size**

8K-3055 a 5V-0202 a 5V-2240 a 8V-6546 a 30" 762 T

9C-3743 b

9C-6266

9C-3703

9C-3755

30" 762 T 105-2532

33" 840 RR 6I-5663 c

34" 865 ET 9C-4310

34" 865 ET 9C-8653

9C-3891 8K-3093/2 159-0464 8E-2465/6 J460

8K-3056 a 3V-4836 a 5V-2273 a 8V-6550 a 36" 914 T 9C-3891 8K-3093/2

(2) 9C-3716 159-0464 159-0465/6 J460

107-3464 (2) 107-3465 (2) 107-3466 J460

(2) 9C-3716 159-0464 159-0465/6 J460

159-0464 159-0465/6 J460

(2) 159-0464 8E-2465/6 J460

Bucket Type: T — Trenching RR — Rock Ripping ET — Extreme Service Trenching * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-69 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-69 for use on buckets with horizontal wear strips column. c Consists of edge, center and intermediate adapters. Order corner adapters separately.

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

TRENCHING, EXCAVATING, ROCK AND EXTREME SERVICE BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Router Plates (R/L) Sidebars Center Adapters♦ Corner Adapters (R/L)♦ Tip Size**

8K-3057 a 5V-2271 a 8V-6540 a 6W-7599 a 42" 1067 T

9C-3866 b

4E-8444 b

9C-6268

8K-3058 a 5V-2407 a 8V-6542 a

42" 1067 T 9C-4311

42" 1067 ET

42" 1067 ET 9C-3763

48" 1219 T

9C-3891 8K-3093/2 (3) 159-0464 8E-2465/6 J460

9C-3891 8K-3093/2 (2) 9C-3716 (3) 159-0464 159-0465/6 J460

(2) 6I-5554 6I-5555/6 J550

(2) 159-0464 159-0465/6 J460

(3) 159-0464 8E-2465/6 J460

Bucket Type: T — Trenching ET — Extreme Service Trenching * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-69 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-69 for use on buckets with horizontal wear strips column.

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

3-67

Excavators 235

TRENCHING, EXCAVATING, ROCK AND EXTREME SERVICE BUCKETS — Continued Standard Bucket and Bearing Assembly

9C-3727 b

8V-6552 a

Width* — inches mm Bucket Type Base Edge Assembly

48" 1219 X 105-3569

48" 1219 R 5V-0191 c

Base Edge Corners (R/L) Sidebars Center Adapters♦ Corner Adapters (R/L)♦ Tip Size**

(2) 9C-3734 (3) 159-0464 159-0465/6 J460

1V-7012 a 5V-2272 a 8V-6548 a 54" 1372 T

5V-0187/8

9C-3891 8K-3093/2

(2) 6I-6554 1U-1555/6 J550

(4) 159-0464 8E-2465/6 J460

9C-3881 b

2V-6893 a

9U-4407 b

54" 1372 X 9C-3890 105-3580

60" 1524 T

63" 1600 X 9U-4413

9C-3955 8K-3093/2 (2) 9C-3734 (3) 159-0464 159-0465/6 J460

(4) 159-0464 8E-2465/6 J460

(3) 159-0464 159-0465/6 J460

Bucket Type: X — Excavating R — Rock T — Trenching * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-69 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-69 for use on buckets with horizontal wear strips column. c Consists of edge and center adapters. Order end adapters separately.

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

TRENCHING, EXCAVATING, ROCK AND EXTREME SERVICE BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Sidebars Center Adapters♦ Corner Adapters (R/L)♦ Tip Size**

9C-3940 a

9C-5758

66" 1676 X 9C-3954

69" 1755 LX

4V-9058 8V-6544 71" 1805 X

9C-5770

9C-3955

(2) 9C-3947 (4) 159-0464 159-0465/6 J460

(4) 159-0464 8E-2465/6 J460

9U-4417 a 71" 1805 X 9U-4423

(4) 159-0464 159-0465/6 J460

Bucket Type: X — Excavating LX — Light Excavation * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-69 for use on buckets with horizontal wear strips column.

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

3-68

Excavators 235

RIPPERS FOR EXTREME SERVICE TRENCHING BUCKETS Ripper Shank Pin Cotter Tip Options Sharp Penetration Retainer

(*) 9J-6586 2K-6413 (2) 3G-5325 9W-7309 — recommended 6Y-0309 1U-2405

* One, two or three shanks may be used. Parts shown are for each shank.

MASS EXCAVATION (ME) BUCKETS Standard Bucket and Bearing Assembly Bucket Type Base Edge Assembly Center Adapters♦ Adapters (R/L)♦ Tip Size*

6W-0800

6W-1365

6W-3661

MX-GP

MX-R 6W-1362

MX-LM 6W-3658 (6) 1U-1304

(6) 159-0464 (3) 8E-4465/6 J460

J460

Bucket Type: MX — Mass Excavation * See tip options chart on page 3-93.

GP — General Purpose

R — Rock

J300 LM — Light Material

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

FRONT SHOVEL BUCKETS Standard Bucket and Bearing Assembly Bucket Type Base Edge Assembly* Adapters (R/L)♦ Tip Size**

4V-5736

3V-1259

Front Dump Bottom Dump 4V-5751 4V-5751 (3) 8E-4465/6 (3) 8E-4465/6 J460 J460

* Consists of edge and 3 right and 3 left adapters. ** See tip options chart on page 3-93.

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

SIDECUTTERS FOR TRENCHING AND EXCAVATING BUCKETS

Sidecutter Type

Digging Conditions

Additional Bite Width Vertical Horizontal Wear Strip Wear Strips inch mm inch mm

Strike-Off Blade Combination

Light Average Moderate

None 3 6

None 75 150

None 0.75 4.0

None 20 100

174-8043/4 8J-9615/14 8J-9615/14

Tooth Heavy Duty

Tough High Wear

8 None

200 None

4.5 None

115 None

8E-1468/9 112-2487/8

R/L

Tip*/ Blade

(2) 4T-2886 9W-3452*

Hardware Bolt

Nut

(4) 1J-5607 a (6) 4F-4042 (8) 1J-6762 a (6) 4F-4042 (6) 4F-4042 a (6) 1D-4635

(4) 2J-3507 (6) 2J-3507 (8) 2J-3506 (6) 2J-3507 (6) 2J-3507 (6) 2J-3507

* For tip options available see chart on page 3-93 and use appropriate pin and retainer assembly. a Use plow bolt 1D-4709 if bucket has router plates 8K-3092/3; otherwise use standard bolts (1D-4709 for strike-off; 1D-4637 for other sidecutter types).

3-69

Excavators E300

TRENCHING AND EXCAVATING BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Sidebars Center Adapters♦ Corner Adapters (R/L)♦ Tip Size**

8R-2712 30" 762 T (2) 9C-4391 159-0464 159-0465/6 J460

104-3338 8R-2828 33" 840 ET 105-2532 159-0464 159-0465/6 J460

9C-4316

9C-4317

8R-2786

104-3340

36" 914 T 9C-4310 (2) 9C-4391 (2) 159-0464 159-0465/6 J460

42" 1067 T 9C-4311 (2) 9C-4391 (2) 159-0464 159-0465/6 J460

42" 1067 ET 9C-3763

42" 1067 ET 104-5747

(2) 159-0464 159-0465/6 J460

(3) 6I-6404 6I-6405/6 J400

Bucket Type: T — Trenching ET — Extreme Service Trenching * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers.

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

TRENCHING AND EXCAVATING BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Center Adapters Corner Adapters (R/L) Tip Size**

9C-4318

104-3342

8R-2702

104-3343

51" 51" 59" 59" 1295 1295 1500 1500 X X X X 9C-4312 6I-5225 6I-5224 (3) 159-0464♦ (2) 159-0464♦ (4) 159-0464♦ (4) 6I-6404 159-0465/6♦ 159-0465/6♦ 159-0465/6♦ 6I-6405/6 J460 J460 J460 J400

8R-2724 69" 1755 U 9C-5770 a

Bucket Type: X — Excavating U — Utility * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a Base edge only — no adapters.

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

SIDECUTTERS FOR E300 BUCKETS Sidecutter Type

Digging Additional Bite Width Conditions inch mm

R/L

Strike-Off Blade Combination

Light Average Moderate

None 0.75 4.00

None 20 100

8J-9615/4 8J-9615/4

Tooth Heavy Duty

Tough High Wear

4.50 None

115 None

8E-1468/9 112-2487/8

* See tip options chart on page 3-93.

3-70

Tip* Blade

Hardware Bolt Nut

(4) 1D-4709 (6) 1D-4637 (2) 4T-2886 (6) 1D-4637 (8) 1J-6762 (2) 9W-8452* (6) 1D-4637 (6) 1D-4635

(4) 2J-3507 (6) 2J-3507 (6) 2J-3507 (8) 2J-3506 (6) 2J-3507 (6) 2J-3507

Excavators 231

TRENCHING AND EXCAVATING BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly

7Y-7573 41" 1040 T 109-8558

Center Adapters Corner Adapters (R/L) Tip Size**

(2) 6I-6404 6I-6405/6 J400

7Y-7552 47" 1195 X 6I-5211 109-8554 (3) 6I-6404 6I-6405/6 J400

7Y-7468

8R-9476

53" 1345 X 7Y-7567

54" 1372 X 9C-2930

(3) 6I-6404 6I-6405/6 J400

(4) 6I-6354 6I-6355/6 J350

6I-5025 5I-3493 56" 1420 X 109-8555 (3) 6I-6404 6I-6405/6 J400

7Y-7469 56" 1420 X 7Y-7550 (3) 6I-6404 6I-6405/6 J400

Bucket Type: T — Trenching X — Excavating * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers.

TRENCHING AND EXCAVATING BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Center Adapters Corner Adapters (R/L) Tip Size**

5I-3483

8R-9479

117-8966

4E-6795

8R-9482

58" 1475 X 109-8556

60" 1524 X 108-3569

60" 1524 X 117-8975

64" 1625 LX 4E-6797

68" 1725 U

(3) 6I-6404 6I-6405/6 J400

(5) 6I-6354 6I-6355/6 J350

8R-2662 (3) 159-0464 159-0465/6 J460

(4) 6I-6404 6I-6405/6 J400

Bucket Type: X — Excavating LX — Light Excavation U — Utility * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers.

SIDECUTTERS FOR 231 BUCKETS Sidecutter Type

Digging Additional Bite Width Conditions inch mm

R/L

Strike-Off Blade Combination

Light Average Moderate

None 2.00 6.00

None 50 150

174-8043/4 8J-9615/4 8J-9615/4

Tooth Heavy Duty

Tough High Wear

8.00 None

200 None

8E-1468/9 112-2487/8

Tip* Blade

(2) 4T-2886 (2) 1U-3352

Hardware Bolt Nut (4) 1D-4709 (6) 1D-4709 (6) 1D-4709 (8) 1J-6762 (6) 1D-4709 (6) 1D-4635

(4) 2J-3507 (6) 2J-3507 (6) 2J-3507 (8) 2J-3506 (6) 2J-3507 (6) 2J-3507

* See tip options chart on page 3-93.

3-71

Excavators 225, 229 Buckets shown below can also be used on MS230-1, MS230-2, MS230-3, and MS240-8 machines.

TRENCHING, EXCAVATING, ROCK, CLAMSHELL BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Corners (R/L) Center Adapters Corner Adapters (R/L) Tip Size**

8K-2040 a 3V-1894 a 3V-4760 a 7V-4170 a 24" 610 T 8K-0668 8K-3050/1 3G-8354 3G-8355/6 J350

9C-2877 b 8R-6419 b 8R-6327 b 24" 610 T 104-2096

6I-63544 6I-6355/6 J350

8K-2041 a 3V-1896 a 3V-4770 a 7V-4169 a 30" 762 T 8K-0668 8K-3050/1 (2) 3G-8354 3G-8355/6 J350

9C-2888 b 8R-6420 b

105-2556 b

9C-3253 b 8R-6421 b

30" 762 T 104-2097

30" 762 ET 105-2761

32" 815 ET

(2) 6I-6354 6I-6355/6 J350

6I-640 6I-6405/6 J400

159-0464♦ 159-0465/6♦ J460

Bucket Type: T — Trenching ET — Extreme Trenching * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-74 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-74 for use on buckets with horizontal wear strips column.

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

TRENCHING, EXCAVATING, ROCK, CLAMSHELL BUCKETS — Continued Standard Bucket and Bearing Assembly

4E-8999 b

Width* — inches mm Bucket Type Base Edge Assembly Base Edge Corners (R/L) Sidebars Center Adapters Corner Adapters (R/L) Tip Size**

34" 865 ET 4E-9007

8K-2042 a 3V-4780 a 7V-4925 a 9V-4732 a 36" 914 T

9C-2659 b 8R-6422 b 8R-6330 b

8K-2043 a 3V-4790 a 7V-4927 a

9C-2866 b 8R-6331 b 8R-6423 b

5V-0225

36" 914 T 6I-5280

42" 1067 T

42" 1067 T 6I-5193

42" 1067 R

8K-0668 8K-3050/1 6I-6404 6I-6405/6 J400

(3) 3G-8354 3G-8355/6 J350

8K-0668 8K-3050/1 (2) 6I-6354 6I-6355/6 J350

(3) 3G-8354 3G-8355/6 J350

9C-3891 (2) 9C-2912 (3) 6I-6354 6I-6355/6 J350

(2) 159-0464♦ 8E-2465/6♦ J460

Bucket Type: ET — Extreme Trenching T — Trenching R — Rock * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-74 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-74 for use on buckets with horizontal wear strips column.

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

3-72

Excavators 225, 229

TRENCHING, EXCAVATING, ROCK, CLAMSHELL BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Corners (R/L) Sidebars Center Adapters Corner Adapters (R/L) Tip Size**

8K-2044 a 3V-4800 a 7V-4929 a 48" 1219 T

9C-2904 b 8R-6342 b

2V-1786 a 3V-4810 a

48" 1219 X 104-3436

54" 1372 T

5V-0166 8K-3050/1 (4) 3G-8354 3G-8355/6 J350

9C-2921 b 8R-6333 b 8R-6425 b 54" 1372 X 9C-2930 6I-5248

2V-1790 8K-3050/1 (2) 9C-2912 (4) 6I-6354 6I-6355/6 J350

(4) 3G-8354 3G-8355/6 J350

5V-0153 a 60" 1524 T 5V-0157 c

9C-3313 b 8R-6334 b 8R-6426 b 60" 1524 EX 108-3569

5V-0166 (2) 9C-2912 (4) 6I-6354 6I-6355/6 J350

(4) 3G-8354 3G-8355/6 J350

(5) 6I-6354 6I-6355/6 J350

Bucket Type: T — Trenching X — Excavating EX — Extreme Servicing Excavating * Bucket width is measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Sidecutter chart on page 3-74 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-74 for use on buckets with horizontal wear strips column. c Consists of edge and center adapters. Order end adapters separately.

TRENCHING, EXCAVATING, ROCK, CLAMSHELL BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Corners (R/L)

9C-3329

66" 1676 LX 9C-3341 a (2) 9C-3336

8R-6345 8R-2065 8R-6336 8R-6428 68" 1725 U 8R-2662**

Bucket Type: LX — Light Excavation U — Utility * Bucket width is measured across outside corners of new long tips. ** Use (5) 3G-7357 (J350) or (5) 3G-9307 (J300) bolt-on adapters and (10) 6V-8360 bolts and (10) 5P-8362 nuts or use bolt-on cutting edge (1) 6Y-5680 and (9) 6V-6535 bolts and (9) 3K-9770 nuts. a Use bolt-on edge: (1) 4T-9586 and (11) 4J-9208 bolts and (11) 2J-3507 nuts.

3-73

Excavators 225, 229

CLAMSHELL BUCKETS Assembly Group Width* — inches mm Adapters A Adapters B Tip Size**

8K-1467 24" 610 (2) 8J-7123 (3) 8J-7123 J250

8K-1468 30" 762 (3) 8J-7123 (4) 8J-7123 J250

8K-1469 36" 914 (3) 8J-7123 (4) 8J-7123 J250

8K-1470 42" 1067 (4) 8J-7123 (5) 8J-7123 J250

* Includes edge and adapters. ** See tip options chart on page 3-93 for other part numbers.

RIPPERS FOR EXTREME SERVICE TRENCHING BUCKETS Ripper Shank Pin Cotter Tip Options Sharp Penetration Pin Retainer

(*) 9J-6586 2K-6413 (2) 3B-5325 9W-7309 — recommended 6Y-0309 2W-2668 1U-2405

* One, two or three shanks may be used. Parts shown are for each shank.

SIDECUTTERS FOR TRENCHING AND EXCAVATING BUCKETS

Sidecutter Type

Digging Conditions

Additional Bite Width Vertical Horizontal Wear Strips Wear Strips inch mm inch mm

Strike-Off Blade Combination

Light Average Moderate

None 3 6

Tooth Heavy Duty

Tough High Wear

8 None

None 75 150 200 None

None 2.0 5.5 4.0 None

None 55 140 100 None

R/L

Tip or Blade*

174-8043/4 8J-9615/4 8J-9615/4 (2) 4T-2886 8J-4951/2 b (2) 1U-3352 b 112-2487/8

Hardware Bolt Nut (4) 1J-5607 a (6) 4F-4042 a (8) 1J-6762 (6) 4F-4042 a (6) 4F-4042 a (6) 1D-4635

(4) 2J-3507 (6) 2J-3507 (8) 2J-3506 (6) 2J-3507 (6) 2J-3507 (6) 2J-3507

* For tip options available see above chart and use appropriate pin and retainer assembly. a Use plow bolt 1J-5607 or 4F-4052 if bucket has router plate 8K-3050/1; otherwise use standard bolts (1D-4709 for strike-off; 1J-6762 for combination; or 1D-4637 for other side cutter types). b Use 8J-5185/6 adapters and 1U-3452 tips (or options) on Extreme Service Trenching buckets.

3-74

Excavators E240 Buckets shown below can also be used on MS230-1, MS230-2, MS230-3, and MS240-8 machines.

TRENCHING AND EXCAVATING BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly

9C-9390 100-6223 24" 610 T 104-2096

Sidebars Center Adapters Corner Adapters (R/L) Tip Size**

6I-6354 6I-6355/6 J350

9C-4333

8R-0246

31" 785 T 104-2097

32" 815 ET a

(2) 6I-6354 6I-6355/6 J350

Bucket Type: T — Trenching ET — Extreme Service Trenching * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a See Ripper components for optional rippers.

9C-3839 108-5183 36" 914 T 132-8418 6I-5280

159-0464♦ (2) 6I-6354 159-0465/6♦ 6I-6355/6 J460 J350

9C-4344 108-5185 42" 1067 T 6I-5193

9C-9663 108-5187 48" 1219 X 104-3436

(2) 9C-2912 (3) 6I-6354 6I-6355/6 J350

(2) 9C-2912 (4) 6I-6354 6I-6355/6 J350

X — Excavating

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

TRENCHING AND EXCAVATING BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Base Edge Corners (R/L) Center Adapters Corner Adapters (R/L) Tip Size**

9C-9667

108-5189

8R-6510

9C-9671

8R-6511

54" 1372 X 9C-2930 6I-5248

56" 1420 X 6I-5204

60" 1524 X 108-3569

60" 1524 EX 108-3569

66" 1676 LX

8R-2662 a (2) 9C-2912 (4) 6I-6354 6I-6355/6 J350

(4) 6I-6354 6I-6355/6 J350

(2) 105-6588 (5) 6I-6354 6I-6355/6 J350

(5) 6I-6354 6I-6355/6 J350

Bucket Type: X — Excavating EX — Extreme Service Excavating LX — Light Excavation * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a Use bolt-on edges: (1) 6Y-5680; (9) 6V-6535 bolts; and (9) 3K-9770 nuts or use (5) 3G-7357 (J350) or (5) 3G-9307 (J300) bolt-on adapters and (10) 6V-8360 bolts and (10) 5P-8362 nuts.

SIDECUTTERS FOR E240 BUCKETS Sidecutter Type

Digging Conditions

Additional Bite Width inch mm

Strike-Off Blade Combination

Any Average Moderate

None 2.0 5.5

Tooth Heavy Duty

Tough High Wear

4.0 None

None 50 140 100 None

R/L 174-8043/4 8J-9615/4 8J-9615/4 8J-4951/2 112-2487/8

Tip*/ Blade

(2) 4T-2886 (2) 1U-3352

Hardware Bolt (4) 1D-4709 (6) 1D-4637 (6) 1D-4637 (8) 1J-6762 (6) 1D-4637 (6) 1D-4635

Nut (4) 2J-3507 (6) 2J-3507 (6) 2J-3507 (8) 2J-3506 (6) 2J-3507 (6) 2J-3507

* For tip options available see chart on page 3-93 and use appropriate pin and retainer assembly.

3-75

Excavators 224, J450/J460 UPDATE

RIPPERS FOR EXTREME SERVICE TRENCHING BUCKETS Ripper Shank Pin Cotter Tip Options Sharp Penetration Retainer

(*) 9J-6586 2K-6413 (2) 3G-5325 9W-7309 — recommended 6Y-0309 1U-2405

* One, two or three shanks may be used. Parts shown are for each shank.

J450/J460 UPDATE Though similar in appearance, there is a major difference between the J450 and new J460 families. The J460 size is not an increase in width from 4.50" to 4.60". The new J460 parts provide improved retention capabilities by increasing the pin size from 19.05 mm to 23.81 mm in diameter and the adapter pin bore from 21 mm to 25 mm. The retainer also increased in size. The tips for both the J450 and J460 adapters, however, are the same. Customers and dealers should be aware that either the J450 or J460 adapters could be on 988/235 buckets and any other buckets with upsized J450/J460 adapters. Current production buckets are using J460 adapters exclusively. The attached list identifies the J450 adapter part numbers along with the J460.

Adapter Flush Mount—Center Flush Mount—Right Flush Mount—Left MODULOK System—Center MODULOK System—Corner Sidecutter—Right Sidecutter—Left Two Strap Excavators—Center Two Strap Excavators—Right Two Strap Excavators—Left Corner Guard—Corner Corner Guard—Right Corner Guard—Left Two Strap Loader—Center Two Strap Loader—Right Two Strap Loader—Left Corner Guard—Corner Corner Guard—Right Corner Guard—Right Adapter Nose Two Strap FS—Right Two Strap FS—Left Bottom Strap—Center Bottom Strap—Right Bottom Strap—Left Two Strap Excavators—Right Two Strap Excavators—Left Heavy Duty Pin Heavy Duty Retainer Assembly

3-76

J460 Number

J450 Number

8E-0464 8E-0465 8E-0466 8E-1464 8E-1465 8E-1468 8E-1469 159-0464 8E-2465 8E-2466 8E-2467 8E-2468 8E-2469 8E-3464 8E-3465 8E-3466 8E-3467 8E-3468 8E-3469 8E-4464 8E-4465 8E-4466 8E-5464 8E-5465 8E-5466 159-0465 159-0466 114-0468 107-3469

7T-8454 7T-8455 7T-8456 8J-6396 8J-6397 8J-5185 8J-5186 1U-1454 1U-1455 1U-1456 4T-8457 4T-8459 4T-8458 4T-7454 4T-7455 4T-7456 4T-7457 4T-7459 4T-9458 6Y-3454 3G-7455 3G-7456 9J-3667 9J-3665 9J-3666 9W-2455 9W-2456

Excavators 224

REPLACEMENT PARTS FOR GENERAL PURPOSE BUCKETS Bucket Width inch mm 20 24 28 32 36 40 44 48 56

510 610 710 815 914 1016 1120 1219 1420

Bucket and Bearing Assembly

5W-3469 5W-3470 5W-3471 5W-3472 5W-3474 5W-3714

Base Edge*

Qty. of Teeth

5W-7938 5W-7940 5W-7942 5W-7944 5W-7946 5W-7948 5W-7949 5W-7953

3 3 3 4 4 4 5 5 6

Corners None

* Does not include adapters — must be ordered separately.

TEETH FOR GENERAL PURPOSE BUCKETS Adapters

Tip Options*

9J-8929

Long Short Wide Penetration Penetration Long Life Sharp Corner Center Twin Heavy Duty Long Heavy Duty Long Life Heavy Duty Abrasion

Retainers 1U-3302 1U-3301 107-3300 9J-4309 125-8309

HD Pin HD Retainer Assembly

132-4766 149-5733

9W-8308 9W-8309 135-9308 9N-4302 125-8302 9N-4303

* Additional tip options found in tip option chart on page 3-93.

REPLACEMENT PARTS FOR DITCH CLEANING BUCKETS Bucket Width inch mm 79 94

2007 2388

Bucket & Bearing Assembly 5W-3706* 5W-3707*

Base Edge

Qty. of Teeth

Corners

5W-7957 5W-7959

None

None

* For use with hydraulic tilt.

3-77

Excavators 224

REPLACEMENT PARTS FOR ROCK BUCKET Bucket Width inch mm 30 34 40 44 48 52

762 865 1016 1120 1219 1320

Bucket and Bearing Assembly

Base Edge*

Qty. of Teeth

Corners

5W-3484 5W-7612

5W-7929 5W-7930

3 4 4 4 5 5

LH-5W-7921 RH-5W-7923

5W-7614 5W-7615

5W-7933 5W-7934

* Does not include adapters — must be ordered separately.

TEETH FOR ROCK BUCKETS Adapters 1U-1350

Tip Options* Long Short Wide Penetration Penetration Long Life Penetration Plus Sharp Corner Center Twin Heavy Duty Long Heavy Duty Long Life Heavy Duty Abrasion

* Additional tip options found in tip option chart on page 3-93.

3-78

Retainers 1U-3352 1U-3351 107-3350 9J-4359 119-9359 9W-2358 9W-2359 135-9357 9N-4352 135-9352 9N-4353

HD Pin HD Retainer Assembly

114-0358 114-0359

Excavators E200, EL200

TRENCHING AND EXCAVATING BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Versa-Link Attachment Base Edge Assembly Sidebars Center Adapters Corner Adapters (R/L) Tip Size**

8R-2244

8R-2250

8R-2252

8R-2255

24" 610 T

30" 762 T

36" 914 T

42" 1067 X

9C-7381 (2) 9C-4361 9W-1304 7T-3305/6 J300

9C-4307 (2) 9C-4361 (2) 9W-1304 7T-3305/6 J300

(2) 9C-4361 (3) 9W-1304 7T-3305/6 J300

(2) 9C-4474 (3) 9W-1304 7T-3305/6 J300

8R-2254 42" 1067 EX 9C-5553 9C-8019 (2) 9C-8015 (3) 6I-6354 6I-6355/6 J350

8R-2257 48" 1219 X 9C-7287 (2) 9C-4474 (4) 9W-1304 7T-3305/6 J300

Bucket Type: T — Trenching X — Excavating EX — Extreme Service Excavating * Measured across outside corners of new long tips. ** See tip option chart on page 3-93 for other tip part numbers.

TRENCHING AND EXCAVATING BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Sidebars Center Adapters Corner Adapters (R/L) Tip Size**

6I-5005 54" 1372 X 7I-6707 (2) 9C-4474 (6) 8E-9490 J300

8R-2259 54" 1372 X 9C-7315 (2) 9C-4474 (4) 9W-1304 7T-3305/6 J300

Bucket Type: X — Excavating * Measured across outside corners of new long tips. ** See tip option chart on page 3-93 for other tip part numbers.

3-79

Excavators E200, EL200

SIDECUTTERS FOR NACD, CACO, AND VERSA-LINK ATTACHMENTS Sidecutter Type

Digging Conditions

Additional Bite Width Vertical Horizontal Wear Strips Wear Strips inch mm inch mm

Strike-Off Blade Combination

Any Average Moderate

None 3 6

None 75 150

None 2 4

None 50 100

R/L 9J-1857/8 9J-1855/6 9J-1855/6

Tip*/ Blade

Hardware

4T-2963/4

Bolt

Nut

(4) 4F-7827 a (6) 4F-7827 a (6) 4F-7827 a (8) 4F-3656

(4) 2J-3506 (6) 2J-3506 (6) 2J-3506 (8) 1D-4720

* For tip options available see chart on page 3-93 and use appropriate pin and retainer assembly. a For use on Trenching (T) and Excavating (X) buckets only; use 5J-4771 bolt-on EX buckets.

CAPL, CofA, AND SCM BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Center Adapters Tip Size**

993-715 a 37" 940 T (4) 9W-1304 J300

993-722 a 42" 1067 T (5) 9W-1304 J300

993-724 a 49" 1245 X (6) 9W-1304 J300

993-726 a 53" 1345 X (6) 9W-1304 J300

Bucket Type: T — Trenching X — Excavating * Measured across outside corners of new long tips. ** See tips options chart on page 3-93 for other tip part numbers. a Use sidecutters 964748/7; (8) 993716 bolts; (8) 964881 nuts.

SPECIALTY BUCKETS Bucket Width* inch mm 32 34 45 48 75 79 81

815 865 1145 1219 1905 2007 2055

Bucket Type

Standard Bucket and Bearing Assembly

EJ 993-731 X (LR) 993-737 CS (2) 993-763 DC (LR) 993-745 a CS (2) 993-784 DC 994-275 BF 993-728 TZ 993-729

Adapters

**Tip** Long

Pin

Retainer Assembly

(2) 9W-1304 (2) 1U-3302 (4) 1U-3252 (6) 9J-4384 (6) 1U-3202 (6) 8E-6208 (6) 8E-6209 (6) 9J-4384

HD Pin

(2) 132-4766 (2) 149-5733 (4) 132-4762 (4) 149-5733

(6) 1U-3202 (6) 8E-6208 (6) 8E-6209

(2) 9W-1304 (2) 1U-3302

(2) 132-4766 (2) 149-5733

Bucket Type:

EJ — Ejector X (LR) — Excavating for 51' long reach, front only. Does not accept sidecutters. CS — Clamshell DC (LR) — Ditch cleaning for 51' long reach, front only. Does not accept sidecutters. DC — Ditch Cleaning BF — Bank Forming TZ — Trapezoid * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers. a For 51' long reach, front only. Does not accept sidecutters.

REPLACEMENT RIPPER COMPONENTS Ripper Tip Centerline Penetration Retainer

3-80

HD Retainer Assembly

Standard

Versa-Link Attachment

993746

8R-0515

6Y-0352 6Y-0359 1U-2405

6Y-0352 6Y-0359 1U-2405

Excavators 215, 219

TRENCHING, EXCAVATING AND ROCK BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Edge or Edge Assembly Corners (R/L) Sidebars Center Adapters End Adapters (R/L) Tip Size**

5V8091 a

9C-7372 b

5V8090 a

9C-7342 b

5C-5926 a

9C-7330 b

24" 610 T 5V-8047 c 6A-8765/6

24" 610 T 9C-7381

30" 762 T 5V-8046 c 6A-8765/6

30" 762 T 9C-4307

36" 914 T 5C-5716 c 6A-8765/6

36" 914 T

9W-1304 3G-6305/6 J300

(2) 9C-4361 9W-1304 7T-3305/6 J300

(2) 9W-1304 3G-6305/6 J300

(2) 9C-4361 (2) 9W-1304 7T-3305/6 J300

(3) 9W-1304 3G-6305/6 J300

(2) 9C-4361 (3) 9W-1304 7T-3305/6 J300

Bucket Type: T — Trenching * Bucket width is measured across outside corners of new long tips. ** See tooth options chart on page 3-93. a See Sidecutter chart on page 3-83 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-83 for use on buckets with horizontal wear strips column. c Edge, does not include adapters.

TRENCHING, EXCAVATING AND ROCK BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Versa-Link Attachment Edge or Edge Assembly Corners (R/L) Sidebars Center Adapters End Adapters (R/L) Tip Size**

9V-3999 a

5C-5927 a

9V-4772 a

9C-7180 b

9C-8011 b

5C-6325 a

36" 914 T

42" 1067 T

42" 1067 T

42" 1067 X 9C-7388 b

42" 1067 EX

42" 1067 R

9V-3998 c 6A-8765/6

5C-5717 c 6A-8765/6

9V-4773 c 6A-8765/6

9C-8019

8K-0668 c

(3) 9W-1304 3G-6305/6 J300

(3) 9W-1304 3G-6305/6 J300

(3) 9W-1304 3G-6305/6 J300

Bucket Type: T — Trenching X — Excavating EX — Extreme Service Excavating * Bucket width is measured across outside corners of new long tips. ** See tooth options chart on page 3-93. a See Sidecutter chart on page 3-83 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-83 for use on buckets with horizontal wear strips column. c Edge, does not include adapters.

(2) 9C-4474 (3) 9W-1304 7T-3305/6 J300

(2) 9C-8015 (3) 6I-6354 6I-6355/6 J350

(3) 3G-8354 8G-8355/6 J350

R — Rock

3-81

Excavators 215, 219

TRENCHING, EXCAVATING AND ROCK BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Edge or Edge Assembly Corners (R/L) Sidebars Center Adapters End Adapters (R/L) Tip Size**

5C-5929 a

9C-7278 b

5C-5928 a

9C-7306 b

48" 1219 T 5C-5718 c 6A-8765/6

48" 1219 X 9C-7287

54" 1372 T 5C-5719 c 6A-8765/6

54" 1372 X 9C-7315

(4) 9W-1304 3G-6305/6 J300

(2) 9C-4474 (4) 9W-1304 3G-6305/6 J300

(4) 9W-1304 3G-6305/6 J300

(2) 9C-4474 (4) 9W-1304 7T-3305/6 J300

Bucket Type: T — Trenching X — Excavating * Bucket width is measured across outside corners of new long tips. ** See tooth options chart on page 3-93. a See Sidecutter chart on page 3-83 for use on buckets with vertical wear strips column. b See Sidecutter chart on page 3-83 for use on buckets with horizontal wear strips column. c Edge, does not include adapters.

CLAMSHELL BUCKETS Bucket Width inch mm

Bucket Group

24

610

5C-3300

30

762

5C-3199

36

914

5C-3301

42

1067

5C-3302

* Does not include teeth — must be ordered separately.

3-82

Base Edge*

Qty. of Teeth

5C-0859 5C-0858 5C-3319 5C-3320

2 3 3 4 3 4 4 5

Excavators 215, 219

TOOTH OPTIONS Bucket Type Adapters Center Right End Left End Tip Options Long Short Wide Abrasion Penetration Penetration Long Life Sharp Corner Center Twin Heavy Duty Long Heavy Duty Long Life Heavy Duty Abrasion Pin Retainer Assembly Heavy Duty Pin Heavy Duty Retainer Assembly

T, X

EX, Rock

Clamshell

9W-1304 3G-6305 3G-6306

3G-8354 3G-8355 3G-8356

9J-4384*

1U-3302 1U-3301 107-3300

1U-3352 1U-3351 107-3350

1U-3202

9J-4309 125-8309

9J-4359 119-9359

9W-8308 9W-8309 135-9308 9N-4302 125-8302 9N-4303

9W-2358 9W-2359 135-9357 9N-4352 135-9352 9N-4353

132-4766 149-5733

8E-6359 114-0358 114-0359

109-9200 4T-2203 1U-3209 9W-8208 9W-8209 135-8208

8E-6208 8E-6209

Bucket Type: T — Trenching X — Excavating EX — Extreme Service Excavating * Bolt-On. Use one 4F-4042 bolt, one 8J-2928 bolt and two 8J-2933 nuts.

SIDECUTTERS FOR TRENCHING AND EXCAVATING BUCKETS Sidecutter Types Strike-Off Blade Combination

Digging Conditions Any Average Moderate

Additional Bite Width Vertical Horizontal Wear Strips Wear Strips inch mm inch mm None 3 6

None 75 150

None 2 4

None 50 100

R/L 9J-1857/8 9J-1855/6 9J-1855/6

Tip*/ Blade

4T-2963/4

Hardware Bolt (4) 4F-7827 a (6) 4F-7827 a (6) 4F-7827 a (8) 4F-3656

Nut (4) 2J-3506 (6) 2J-3506 (6) 2J-3506 (8) 1D-4720

* For tip options available see chart on page 3-93 and use appropriate pin and retainer assembly. a For use on 215 Trenching (T) and Excavating (X) buckets only; use 5J-4771 bolt-on EX buckets.

3-83

Excavators E180 Buckets shown below can also be used on MS180, MS180-3, and MS180-8 machines.

TRENCHING AND EXCAVATING BUCKETS Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Sidebars Center Adapters Corner Adapters (R/L) Tip Size**

9C-8560

109-2203

24" 610 T 9C-7381 (2) 9C-4361 9W-1304 7T-3305/6 J300

24" 610 T 104-2096 104-2103/2 6I-6354 6I-6355/6 J350

9C-4313 30" 762 T 9C-4307 (2) 9C-4361 (2) 9W-1304 7T-3305/6 J300

109-2208

9C-4314

109-2210

30" 762 T 104-2097

36" 914 T

36" 914 T 100-4139

(2) 6I-6354 6I-6355/6 J350

(2) 9C-4361 (3) 9W-1304 7T-3305/6 J300

(5) 8E-9490 J300

Bucket Type: T — Trenching * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers.

TRENCHING AND EXCAVATING BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Versa-Link Attachment Base Edge Assembly Base Edge Sidebars Center Adapters Corner Adapters (R/L) Tip Size**

9C-4315

109-2212

42" 1067 X

42" 1067 X 100-4149

9C-8019 6I-5187

9C-8638

109-2216

9C-8642

48" 1219 X

48" 1219 X

9C-7287

7I-6695

54" 1372 X 9C-7750 9C-7315 7I-6707

100-4150 (2) 9C-4474 (3) 9W-1304 7T-3305/6 J300

(5) 8E-9490 J300

Bucket Type: X — Excavating EX — Extreme Service Excavating * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers.

3-84

9C-8637 109-2214 42" 1067 EX

(2) 9C-8015 (3) 6I-6354 6I-6355/6 J350

(2) 9C-4474 (4) 9W-1304 7T-3305/6 J300

(6) 8E-9490 J300

(2) 9C-4474 (4) 9W-1304 7T-3305/6 J300

Excavators E180

TRENCHING AND EXCAVATING BUCKETS — Continued Standard Bucket and Bearing Assembly Width* — inches mm Bucket Type Base Edge Assembly Center Adapters Corner Adapters (R/L) Tip Size**

109-2218 54" 1372 X 7I-6707 (6) 8E-9490 J300

Bucket Type: X — Excavating * Measured across outside corners of new long tips. ** See tip options chart on page 3-93 for other tip part numbers.

SIDECUTTERS FOR E180 BUCKETS Sidecutter Type Strike-Off Blade Combination

Digging Conditions Any Average Moderate

Additional Bite Width inch mm None 2 4

None 50 100

R/L 9J-1857/8 9J-1855/6 9J-1855/6

Tip*/ Blade

4T-2963/4

Hardware Bolt

Nut

(4) 4F-7827a (6) 4F-7827a (6) 4F-7827a (8) 4F-3656

(4) 2J-3506 (6) 2J-3506 (6) 2J-3506 (8) 1D-4720

* For tip options available see chart on page 3-93 and use appropriate pin and retainer assembly. a For use on Trenching (T) and Excavating (X) buckets only; use 5J-4771 bolt-on EX buckets.

3-85

Excavators 205, 206, 211, 212, 213, 214

REPLACEMENT PARTS FOR GENERAL PURPOSE BUCKETS Bucket Width inch mm 20 24

510 610

28

710

32

815

36

914

40

1016

44

1120

48

1219

52 56

1321 1420

Bucket and Bearing Assembly 5W-0580 5W-0581 8U-0449 a 5W-0582 8U-0452 a 5W-0583 8U-0456 a 5W-0584 8U-0460 a 8U-0465 a 8U-0469 a 5W-0587 8U-2123 a

Base Edge*

Qty. of Teeth

Corners

5W-7935 5W-7937 5W-7938 a 5W-7939 5W-7940 a 5W-7941 5W-7942 a 5W-7943 5W-7944 a 5W-7945 5W-7946 a 5W-7947 5W-7948 a 5W-7950 5W-7949 a

3 3 3 4 4 4 4 5 5 5 5 5 5 5 5 6 6

None None None None None None None None None None None None None None None None None

5W-7952 b

* Does not include teeth. a 213B and 214B only. b Not for use with 205 and 206.

TEETH FOR GENERAL PURPOSE BUCKETS Adapters 3G-0169

9J-8929 (213B and 214B only)

3-86

Tip Options Long Short Wide Penetration Sharp Corner Center Twin Heavy Duty Long Heavy Duty Abrasion Long Short Wide Penetration Penetration Long Life Penetration Plus Sharp Corner Center Twin Heavy Duty Long Heavy Duty Long Life Heavy Duty Abrasion

1U-3252 1U-3251 208-5254 9J-4259 9W-8258 9W-8259 135-8258 9N-4252 9N-4253 1U-3302 1U-3301 107-3300 9J-4309 125-8309 183-5300 9W-8308 9W-8309 135-9308 9N-4302 125-8302 9N-4303

Retainers HD Pin HD Retainer Assembly

132-4763 149-5733

HD Pin HD Retainer Assembly

132-4766 149-5733

Excavators 205, 206, 211, 212, 213, 214

REPLACEMENT PARTS FOR 213B AND 214B ROCK BUCKETS Bucket Width inch mm 30 40

762 1016

Bucket and Bearing Assembly

Base Edge

Adapters

Corners (R/L)

8U-0474 8U-0484

8U-0955 8U-0957

(3) 1U-1350 (4) 1U-1350

5W-7923/1 5W-7923/1

TEETH FOR 213B AND 214B ROCK BUCKETS Adapters

Tip Options

1U-1350

Long Short Wide Penetration Penetration Long Life Sharp Corner Center Twin Heavy Duty Long Heavy Duty Long Life Heavy Duty Abrasion

Retainers 1U-3352 1U-3351 107-3350 9J-4359 119-9359

HD Pin HD Retainer Assembly

114-0358 114-0359

9W-2358 9W-2359 135-9357 9N-4352 135-9352 9N-4353

REPLACEMENT PARTS FOR DITCH CLEANING BUCKETS Bucket Width inch mm 60

Bucket and Bearing Assembly

1524

71

1805

79

2007

91 94

2310 2388

5W-0603* 5W-0590 5W-0604* 8U-2135** 5W-0591 5W-0605*

Base Edge*

Qty. of Teeth

Corners

5W-7954

None

None

5W-7955

None

None

5W-7956

None None None None None

None None None None None

5W-7957 8U-2639** 5W-7958

8U-2137**

* For use with hydraulic tilt. ** 213B and 214B only.

REPLACEMENT PARTS FOR DITCH GRADING BUCKETS Bucket Width inch mm 79 94

2007 2388

Base Edge*

Qty. of Teeth

Corners

5W-7956

None None

None None

* For use with hydraulic tilt.

3-87

Excavators 205, 206, 211, 212, 213, 214

REPLACEMENT PARTS FOR TRAPEZOIDAL BUCKETS Bottom Width inch mm 16

405

24

610

Blade Slope

Base Edge

Qty. of Teeth

1:1.00 1:1.25 1:1.50 1:1.00 1:1.25 1:1.50

Not serviced

2

Not serviced

2

TEETH FOR GENERAL TRAPEZOIDAL BUCKETS Adapters

Tip Options

1U-1254

Long Short Penetration Sharp Corner Center Twin

1U-3252 1U-3251 9J-4259

Retainers HD Pin HD Retainer Assembly

9W-8258 9W-8259 135-8258

REPLACEMENT PARTS FOR CLAMSHELL BUCKETS Bucket Width _ inch mm 11 15 24 28 31 31 35 39

279 381 610 710 785 785 890 990

* Available for 213 and 214 only.

3-88

Bucket Group

Qty. of Teeth

5W-0652 5W-0653 5W-0654 5W-0655 5W-0656 5W-0657 5W-0658* 5W-0659*

1 2 3 3 4 4 4 4

132-4763 149-5733

Excavators 205, 206, 211, 212, 213, 214

TEETH FOR CLAMSHELL BUCKETS Adapters Adapter Bolt Bolt Nut (2)

Tip Options 9J-4384 8T-0381 8T-0667 8T-2351

Long Short Wide Abrasion Penetration Sharp Corner Center Twin

Retainers

1U-3202

Pin Retainer Assembly

8E-6208 8E-6209

109-9200 4T-2203 1U-3209 9W-8208 9W-8209 135-8208

REPLACEMENT PARTS FOR ROCK BUCKETS Bucket Width inch mm 24 30 34 40 44

610 762 865 1016 1120

Bucket and Bearing Assembly

Base Edge*

Qty. of Teeth

Corners

5W-7924 5W-7925

3 4 4 4 5

LH-5W-7920/RH-5W-7922

5W-0579

* Does not include teeth.

TEETH FOR ROCK BUCKETS Adapters 9J-8929

Tip Options Long Short Wide Penetration Penetration Long Life Penetration Plus Sharp Corner Center Twin Heavy Duty Long Heavy Duty Long Life Heavy Duty Abrasion

1U-3302 1U-3301 107-3300 9J-4309 125-8309 183-5300

Retainers HD Pin HD Retainer Assembly

132-4766 149-5733

9W-8308 9W-8309 135-9308 9N-4302 125-8302 9N-4303

3-89

Excavators E70B, E110, E110B, E120, E120B, 311, 312

REPLACEMENT PARTS FOR GENERAL PURPOSE BUCKETS Bucket Width inch mm

Model E70B

15 3/4 19 5/8 31 1/2 33 1/2 17 3/4 17 3/4 23 5/8 27 1/2 35 1/4 39 39 3/8 39 3/8 39 3/8 42 7/8 42 7/8 42 7/8 47 1/4 47 1/4 47 1/4

E110B/E120B

400 500 800 840 450 450 600 700 895 990 1000 1000 1000 1090 1090 1090 1200 1200 1200

Bucket Assembly

Qty. of Teeth

861498 861500 861496 861502 860419 859055 860421 860423 860417 860412 854780 859058 860425 854781 859059 860427 854782 859060 860429

3 3 4 4 3 3 3 4 5 5 5 5 5 5 5 5 6 6 6

TEETH FOR GENERAL PURPOSE BUCKETS Model

Adapter

E70B

6Y-3224

E110B/120B 311/312

Sidecutters

Long Short Heavy Duty Abrasion Penetration Sharp Corner Center Twin Heavy Duty Long Long Short Heavy Duty Long Penetration Sharp Corner Center Twin Heavy Duty Abrasion

119-3253

E110/E120

Tip Options 6Y-3222 6Y-6221 6Y-6223 6Y-8229 6Y-7228 6Y-7229 135-8228 8E-4222 1U-3252 1U-3251 9N-4252 9J-4259

HD Retainer

HD Pin

149-5733

132-4762

149-5733

132-4763

9W-8258 9W-8259 135-8258 9N-4253

99-4837/8

REPLACEMENT PARTS FOR E70B TRAPEZOIDAL BUCKETS Bucket Width Model E70B

inch 69 1/4 x 11 3/4

mm

Bucket Assembly

Quantity of Teeth

1760 x 300

855268

2

TEETH FOR E70B TRAPEZOIDAL BUCKETS Model

Adapter

Tip Options

E70B

6Y-3224

Long Short Heavy Duty Abrasion Penetration Sharp Corner Center Twin

3-90

6Y-3222 6Y-6221 6Y-6223 6Y-8229 6Y-7228 6Y-7229 135-8228

HD Retainer

HD Pin

149-5733

132-4762

Excavators TIP SELECTION GUIDE Tip Features ✔ Made of thru-hardened, DH-2 or DH-3 steel. ✔ Ten tip designs to match every application. ✔ Side-pinned design.

For more penetration:

Tip Benefits ✔ Resistant to wear and breakage. ✔ Maximum productivity. ✔ Fast, easy tip changing. ✔ Excellent tip retention.

Long Tip • best choice for most jobs • good strength • good penetration • good wear material

Penetration Tip • better penetration • less wear material • self sharpening

For better penetration and better wear life: Penetration Long Life • enhanced penetration and performance • increase wear life in moderateto high-impact conditions • reduced tip related operating costs

Sharp • best penetration • least wear material • DH-3 steel for greater wear resistance

Twin Sharp • enhanced fracture capability • used in corners or when penetration is less important

For more wear life: Heavy Duty Long (HDL) Tip • more wear material • use on larger machines in general loading and excavation work • has longer wear life and greater strength than long tip

For longer wear life: Heavy Duty Abrasion (HDA) Tip • use on larger machines when working in sand, gravel and shot rock • maximum wear material • least cost per hour • less penetration

For longest wear life: Heavy Duty Long Life • abrasion resistant material (ARM) • place tip on adapter cavity down for maximum life

For more wear strength, if breakage is a problem: Short Tip • more strength • less wear material

Wide Tip • less wear material • less penetration • cleaner floor • less spillage

Heavy Duty Penetration • use where penetration and long life are desired • good combination of strength and wear life

Long Sharp • use when penetration is the primary concern • provides more wear material than standard sharp

Penetration Plus • resists blunting • use for tough trenching • more wear material

3-91

Excavators

BUCKET TIP Penetration

SELECTION GUIDE Tips Penetration: • Use in densely compacted material such as clay. • Gives maximum penetration. • Self-sharpening.

Short

Short: • Use in high-impact and pry-out work such as rock. • Extremely strong. Long Long: • Use in most general applications where breakage is not a problem. Heavy Duty Long Heavy Duty Long: • Use on larger machines in general loading and excavation work. • Has longer wear life and greater strength.

Heavy Duty Abrasion

Heavy Duty Abrasion: • Use on larger machines when working in sand, gravel and shot rock. • Maximum wear material. Heavy Duty Long Life Heavy Duty Long Life: • A.R.M. positioned to increase wear life and penetration. • Not recommended for extreme impact (increased wear life will not be experienced in extreme impact conditions). Heavy Duty Penetration Heavy Duty Penetration: • Use where penetration and long life are desired. • Good combination of strength and wear life. Sharp

Sharp: • Use when penetration is the primary concern. • Provides less wear material.

Long Sharp

Long Sharp: • Use when penetration is the primary concern. • Provides more wear material than standard sharp.

Twin Sharp Twin Sharp: • Use for enhanced fracture capability. • Less penetration than sharp tip. • More wear material than sharp tip. Penetration Long Life Penetration Long Life: • A.R.M. increases wear life in moderate- to high-impact conditions • Self-sharpening tip enhances penetration Wide Wide: • Provides clean floor. • Increases capacity with less spillage. Penetration Plus: • Resists blunting. • Use for tough trenching. • More wear material.

Penetration Plus

Wear Material

3-92

Penetration

Impact

Excavators TIP OPTION CHART Long Short Wide Penetration Penetration Long Life Penetration Plus Sharp Long Corner Center Twin Heavy Duty Long Heavy Duty Long Life Heavy Duty Abrasion Abrasion Heavy Duty Penetration Heavy Duty Pin Heavy Duty Retainer Assembly *

J200

J225

J250

J300

J350

109-9200

6Y-3222 6Y-6221 186-3010

1U-3252 1U-3251 208-5254 9J-4259

1U-3302 1U-3301 107-3300 9J-4309 125-8309 183-5300

1U-3352 1U-3351 107-3350 9J-4359 119-9359 168-1359

135-8208

6Y-7228 6Y-7229 135-8228

9W-8258 9W-8259 135-8258 9N-4252 9N-4253

168-1300 9W-8308 9W-8309 135-9308 9N-4302 125-8302 9N-4303

168-1350 9W-2358 9W-2359 135-9357 9N-4352 135-9352 9N-4353

132-4763

135-9300 132-4766

144-1358 114-0358

149-5733

149-5733

114-0359

8E-6208*

132-4762

Standard duty.

TIP OPTION CHART — Continued Long Short Wide Penetration Penetration Long Life Penetration Plus Sharp Long Corner Center Twin Heavy Duty Long Heavy Duty Long Life Heavy Duty Abrasion Abrasion Heavy Duty Penetration Heavy Duty Pin Heavy Duty Retainer Assembly a

J400

J450/J460

J550

J600

J700

J800

7T-3402 7T-3401 107-3400 6Y-7409 124-7409 168-1409

9W-8452 9W-8451 107-3450 9W-8459 116-7459 159-0459

9W-8552 9W-8551 107-3550 9W-8559 113-0559 159-0559

6I-6602 6I-6601

4T-4702

6I-8802

7I-7609 119-9609 159-0607

4T-4709

117-6809

159-0400 6Y-5408 6Y-5409 135-9408 8E-4402 116-7402 7T-3403

159-0450 6I-8458 7T-8459 138-6458 9N-4452 101-9054 9N-4453

159-0550 6I-8558 9W-6559 138-6558 9N-4552 101-9055 6Y-2553

159-0600 107-8608 107-8609 135-9608 7Y-0602 107-8602 6I-6603

135-9400 116-7408

138-6451 114-0468 a

138-6552 107-3378

135-9600 113-9608

9U-9702 107-2001 9U-9703 4T-4703 135-9700 113-4708

116-7409

107-3469 a

107-8559

113-9609

113-4709

171-1709 136-8700

117-6802 6I-8803 135-9800 134-1808 134-1809

Use 6Y-2527 Pin and 8E-6359 Retainer Assembly on J450 Adapters.

NOTE: For information on tools for pin removal, refer to NEHP6022.

“J” Family Identification How to identify tip or adapter family? Place a tape measure across the back of the tip at midpoint of the side walls. Example: 3.0" 3.5" 5.5"

(76.20 mm) (88.90 mm) (139.70 mm)

measure is J300 family measure is J350 family measure is J550 family

The majority of the time, the second to last and the third to last locations in the part number identify the “J” size. Example:

9W-8551 J550

3-93

Excavators

K Series Excavator Upgrade Base Edge Assemblies The following base edge assemblies are available to convert or upgrade excavator bucket assemblies to K Series adapters. Corner, or end, adapters are not included with these assemblies in order to accommodate variations in sidebar spacing. Refer to Special Instructions REHS2084 for welding information and additional detail.

K Series Size

Part Number

Width @ Front in (mm)

Thickness in (mm)

Adapters Attached

K Series Size

K80

232-0022 23.4 (595) 1.42 (36) 253-0132 23.4 (595) 1.42 (36) 232-0023 29.4 (746) 1.42 (36) 232-0024 35.4 (900) 1.42 (36) 232-0025 41.4 (1052) 1.42 (36) 232-0026 47.4 (1204) 1.42 (36) Adapters for corners: 220-9084(2) or 220-9085/6

1 2 2 3 3 4

K130

K90

232-0027 23.8 (606) 1.57 (40) 232-0028 29.8 (756) 1.57 (40) 232-0029 35.9 (913) 1.57 (40) 232-0030 41.9 (1064) 1.57 (40) 238-3199 47.7 (1212) 1.57 (40) 232-0031 47.7 (1212) 1.57 (40) 232-0032 53.3 (1354) 1.57 (40) Adapters for corners: 220-9094(2) or 220-9095/6

1 2 3 3 3 4 5

K100

232-0033 29.6 (753) 1.75 (45) 232-0034 36.4 (926) 1.75 (45) 232-0039 41.9 (1064) 1.75 (45) 232-0035 47.7 (1212) 1.75 (45) 232-0036 53.5 (1359) 1.75 (45) 232-0037 59.1 (1501) 1.75 (45) 232-0038 65.3 (1658) 1.75 (45) Adapters for corners: 220-9104(2) or 220-9105/6

1 2 3 3 4 5 5

253-0103 29.6 (751) 2.36 (60) 253-0104 35.6 (903) 2.36 (60) 253-0105 41.3 (1050) 2.36 (60) 253-0106 47.3 (1202) 2.36 (60) 257-1771* 47.9 (1216) 2.36 (60) 253-0108 53.3 (1355) 2.36 (60) 253-0107* 53.9 (1369) 2.36 (60) 253-0109 59.3 (1507) 2.36 (60) 253-0110* 60.1 (1527) 2.36 (60) 253-0111 62.2 (1580) 2.36 (60) 253-0112 65.3 (1659) 2.36 (60) 253-0113 65.3 (1659) 2.36 (60) 253-0114* 65.3 (1659) 2.36 (60) 253-0116* 67.0 (1701) 2.36 (60) 253-0115 67.1 (1704) 2.36 (60) 253-0117* 70.2 (1784) 2.36 (60) * denotes 75 mm deeper base edge Adapters for corners: 232-0114(2) or 232-0115/6

1 1 2 3 3 3 3 4 4 4 3 4 4 4 4 5

K110

3-94

Part Number

Width @ Front in (mm)

Thickness in (mm)

Adapters Attached

253-0126 40.0 (1015) 2.76 (70) 253-0127 47.7 (1212) 2.76 (70) 253-0128 53.4 (1356) 2.76 (70) 257-1752 60.4 (1535) 2.76 (70) 257-1753 74.6 (1895) 2.76 (70) 257-1755 77.0 (1957) 2.76 (70) Adapters for corners: 232-0130(2) or 232-0131/2

1 2 3 3 4 4

K150

264-2027 69.0 (1753) 3.15 (80) 264-2035** 80.7 (2050) 3.15 (80) 264-2031 82.2 (2087) 3.15 (80) 264-2043* 87.4 (2220) 3.15 (80) 264-2039* 88.6 (2250) 3.15 (80) 264-2033 95.0 (2413) 3.15 (80) 264-2029 95.7 (2430) 3.15 (80) 264-2037* 95.7 (2430) 3.15 (80) 264-2041* 96.5 (2450) 3.15 (80) 264-2045* 99.0 (2515) 3.15 (80) ** denotes stepped spade edge ** stepped spade accepts 988 segments Adapters for corners: 195-9154(2) or 195-9155/6

3 2 4 4 3 5 3 2 3 4

K170#

4 3 3

264-2051* 92.9 (2360) 3.67 (90) 264-2047* 96.5 (2450) 3.67 (90) 264-2049** 96.5 (2450) 3.67 (90) *# K170 edges and adapters have 35° bevel angle ** denotes stepped spade edge ** stepped spade accepts 988 segments Adapters for corners: 232-2170(2) or 232-2171/2

Excavators

K Series Tips Cat K Series excavator bucket tips use a new vertical retention system that allows quick and easy tip changes. Providing a new locking interface at every tip change to improve retention reliability. Lower profile improves penetration and wear life.

General Duty Tip • General excavation and loading in moderate impact/abrasion. • Moderate penetration. • Symmetric, top and bottom self-sharpening cavities.

Extra Duty Tip • General excavation and loading w/more wear material. • Moderate impact, moderate penetration. • Top self-sharpening cavity.

Penetration Tip • For harder-to-penetrate, moderate impact, lower abrasion. • Very good penetration. • Top rib, bottom cavity to stay sharp.

Penetration Plus Tip • High impact trenching, excavation and loading. • Good penetration, stays sharp. • Symmetric, ribbed top and bottom.

Spike Tip • For maximum penetration, especially in cohesive material. • Stays sharp for enhanced wear life. • Top and bottom rib design.

Double Spike Tip • • • •

For harder-to-penetrate, fracturable materials. Very good penetration, stays sharp. Use in corner positions with Spike Centers. Length matches spike.

Wide Tip • For easy-to-penetrate trenching applications. • Low impact. • Smooth floor trenches.

3-95

Excavators TIP OPTION CHART Penetration Plus General Duty Extra Duty Wide Penetration Spike Double Spike Retainer

K80

K90

K100

K110

K130

K150

K170

220-9083 220-9089 220-9081 222-1080 220-9082 220-9087 220-9088 220-9090

220-9093 220-9099 220-9091 222-1090 220-9092 220-9097 220-9098 220-9090

220-9103 220-9109 220-9101 223-8100 220-9102 220-9107 220-9108 220-9090

220-9113 220-9119 220-9111 223-8110 220-9112 220-9117 220-9118 220-9110

220-9133 220-9139 220-9131 223-8130 220-9132 220-9137 220-9138 220-9130

229-7153 229-7159 229-7151 195-5151 229-7152 229-7157 229-7158 233-7150

232-0173 232-0179 232-0171 223-8170 232-0172 232-0177 232-0178 232-0170

K-Tips and Adapters Edge Thickness inch mm 1.42 1.57 1.77 2.36 2.76 3.15 3.54

36 40 45 60 70 80 90

Center

Part Numbers RH

LH

Tip

Bucket Family

220-9084 220-9094 220-9104 232-0114 232-0130 195-9154 232-2170

220-9085 220-9095 220-9105 232-0115 232-0131 195-9155 232-2171

220-9086 220-9096 220-9106 232-0116 232-0132 195-9156 232-2172

K80 K90 K100 K110 K130 K150 K170

311/312, 315, A, B 315, 318, B, S, C, B S, C, D, S/C D, E, F, TB TB, UB, VB WB, HB JB

“K” Family Identification Measured Distance

To identify tip or adapter family simply measure the distance between the “ears” of the tip in millimeters and round to the nearest 5 mm. Example: 3.15" (80.0 mm) = K80 3.44" (87.4 mm) = K90 3.78" (96.1 mm) = K100

3-96

Excavators MAO PROGRAM

GET Made As Ordered (MAO) Program The GET Made As Ordered (MAO) Program provides customers with custom ground engaging tools for Caterpillar and non-Caterpillar machines. The program does provide custom base edges, base edge assemblies, cutting edges, cutting edges with ARM (Abrasion Resistant Material) patterns and tips, adapters, segments and other current cast or forged parts with custom ARM (Abrasion Resistant Material) patterns. Currently the program does not provide new castings, forgings or new section sizes for rolled steel sections. This is due to longer processing times, lead times and higher costs due to the cost of making new patterns or dies.

MAO PROGRAM PROCEDURES • Customer and dealer determine the need for custom (MAO) GET part vs. existing standard Caterpillar GET part. • If a GET (MAO) part is desired, dealer completes the GET (MAO) part request forms and forwards it (FAX) to the GET Product Center or calls the GET (MAO) Coordinator with the needed information. • Contact Information: • Mail: GET Product Center/MAO Coordinator/Caterpillar Inc./901 W. Washington St./Building CV 4145/E. Peoria, IL 61630-4145 • Fax: (309) 494-7069 • Phone: (309) 494-7041 • The GET Product Center responds with the price information ( Dealer Net and Consumer List ), availability information and minimum order quantity. • If acceptable to the dealer, the dealer advises MAO Coordinator of intent to order. • New part number is set up in the parts system with price. • MAO Coordinator provides the dealer the part number and the dealer places an emergency order on Morton (service charge does not apply to the first custom GET order). • For a new (first order) GET MAO, product parts will be direct shipped with freight prepaid for NACD dealers. For non-NACD dealers, parts will be shipped to the nearest parts depot to the dealer, for emergency forwarding to the dealer. • When three or more orders have been placed on a part number — the part number will be reviewed and in most cases, the part will be stocked and removed off MAO classification.

3-97

Excavators MAO PROGRAM

TERMS AND CONDITIONS • Ground Engaging Tool MAO orders are non-cancelable, once placed. • Ground Engaging Tool MAO parts are non-returnable. • Ground Engaging Tool MAO parts are guaranteed against defects in material and workmanship, but are not covered under the Caterpillar Ground Engaging Tool Breakage Warranty. • Orders for GET MAO products will be set for agreed upon predetermined quantities between the MAO Coordinator and the dealer. • For first time new GET MAO orders, product parts will be direct shipped when ever practical. • GET MAO Request forms are available on line at the GET MAO website (https://productsupport. cat.com/cda/layout?m=48365&x=7 ) click on MAO Request Forms. • Requests forms can be printed out, then filled out and faxed to the GET Product Center. • The following request forms are available for the following product: 1) Wheel Loaders — Flat Cutting Edge, Segments, Segment Edges, ARM Tips, Base Edge and Base Edge Assemblies — Straight and Spade 2) Excavators and Shovels — Base Edge and Base Edge Assemblies, Cutting Edges. Refer to page 3-119 “Replacement Base Edge Dimensions” 3) Scrapers — ARM Router Bits, Flat Cutting Edge 1 Row, 2 Row and 3 Rows of holes, Serrated Flat Cutting Edge 1 Row, 2 Row and 3 Rows of holes 4) Dozer and Rippers — Serrated Flat Cutting Edge, Cutting Edge with Center Holes, Sole Plates with Center Holes, Sole Plates with Offset Holes, Tips, Cutting Edge with Offset Holes, Cutting Edge — Centerline with 1 V End, Cutting Edge — Centerline with 2 V End, Cutting Edge — Offset Holes with 1 V End, Cutting Edge — Offset Holes with 2 V End, End Bit Single Row Holes, End Bit Double Row Holes, Serrated Flat Cutting Edge with 1 Vend and Serrated Flat Cutting Edge with 2 V End 5) Motorgrader — Flat Cutting Edge, Curved Cutting Edge, Serrated Curved Cutting Edge and Serrated Flat Cutting Edge 6) Paving Product — Solid Tungsten Carbide Cutting Edge For further MAO information — on past product produced — see MAO IRMs — New IRM each yearly quarter.

3-98

Excavators

Adapters The following two types of adapters are used on Cat base edges. Note that most base edges have the adapters welded in place when they are made at the factory (called edge assemblies). In many cases, the edge assembly is complete with all adapters. Where indicated, only the center adapters are welded on and the corner adapters must be ordered separately. Two-Strap Weld-On Adapters Available on all Caterpillar Hydraulic Excavators. Welded to the cutting edge on both sides for strength and impact resistance.

Bolt-On Adapters Available on Caterpillar 215 Clamshell bucket cutting edges in a two-bolt single-strap design.

SIDE PINNED WELD-ON TWO-STRAP ADAPTERS◊ Edge Thickness inch mm

Center

4.00 3.54 3.15 3.15 2.75 2.75 2.50 2.36 2.36 2.36 2.00

100 *** 90*** 80 80 70 70 64 60 60 60 50

6I-8804 222-7700 132-4704 113-9604 6I-8604 6I-6604 3G-9494

1.75 1.57 1.50 1.42 1.25 1.25 1.25 1.00 0.85 0.75

45 40 38 36 32 32 32 25 22 19

6I-6404 6I-6354 3G-8354 8E-9490

* ** *** ◊

6I-6554 159-0464

9W-1304 119-3253 119-3204 6Y-3224 119-3205

Part Numbers RH

LH

— 132-4705* 113-9605* 6I-8605* 6I-6605* 3G-9495* 105-6270* 6I-6555* 8E-4465* 8E-2465♦ 159-0465 6I-6405* 6I-6355* 3G-8355

— 132-4706* 113-9606* 6I-8606* 6I-6606* 3G-9496* 105-6269* 6I-6556* 8E-4466* 8E-2466♦ 159-0466 6I-6406* 6I-6356* 3G-8356

3G-6305 7T-3305*

3G-6306 7T-3306*

Welds under sidebar. Other end adapters fit around bucket corners (router plates). Use 6Y-3228 pin and 3G-9609 retainer. 35 mm edge bevel. See Special Instruction SEHS8811 for weld instructions.

Long Tip♦ J800 J700 4T-4702 6I-6602 6I-6602 6I-6602 9W-8552 9W-8552 9W-8552 9W-8452 9W-8452 9W-8452 7T-3402 1U-3352 1U-3352 1U-3302 1U-3302 1U-3302 1U-3252 1U-3202 6Y-3222** 1U-3202

Model or Bucket Family 385 (JB) 385 375 (J) Spade 375 (J) 375 (J) Spade 375, H/J 245FS 245, E/F/G/H Spade 245, E/F/G/H 235FS 235 235, E300, D/E/F 231D, C/D/S 225, E240, B/C/S 225 320, 315 215 215, E180, B E200, 311/312 416-436 E70, 446, 307 416-446

FS — Front Shovel

♦ Note: If spot replacing or replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer with the size of the adapters used on the bucket. See page 3-76 or IRM 91-8.

3-99

Excavators 300 SERIES SIDE-PINNED WELD-ON ROCK RIPPING ADAPTERS Edge Thickness inch mm 2.75 2.36 2.00

70 60 50

Part Numbers Intermediate

Center 107-8604 107-8554 107-3464

107-8605 107-8555 107-3465

Corner 107-8606 107-8556 107-3466

Repair Nose

Long Tip

Bucket Family

8E-4464

6I-6602 9W-8552 9W-8452

H F C/D

SIDE PINNED WELD-ON FLUSH MOUNTED ADAPTERS◊ Edge Thickness inch mm 1.25-1.75 1.00-1.50 1.25-1.50 0.75-1.25

Part Number

32-45 25-38 32-38 19-32

1U-1354 1U-1304 8J-7123* 1U-1254

Long Tip

Model

1U-3352 1U-3302 1U-3252 1U-3252

245 235 225 205-214

* Welds to bottom of clamshell buckets. ◊ See Special Instruction SEHS8811 for weld instructions.

SIDE PINNED WELD-ON BOTTOM STRAP ADAPTERS◊ Edge Thickness inch mm 1.25-1.75 1.00-1.25 1.00-1.25

32-45 25-32 25-32

Part Number

Long Tip

Model

1U-1350 9J-8929 3G-0169

1U-3352 1U-3302 1U-3252

224 224 205-214

◊ See Special Instruction SEHS8811 for weld instructions.

SIDE PINNED BOLT-ON ADAPTER Edge Thickness inch mm 1.00

3-100

25

Part Number

Long Tip

Model

9J-4384

1U-3202

215, 205-214

Excavators EXCAVATOR BUCKET SIDECUTTERS Sidecutters as attachments on excavator backhoe buckets provide flexibility to match varying soil conditions. Features

Benefits

✔ Replaceable wear surface. ✔ Sharpened sidecutters. ✔ Increase bucket width and heaped capacity.

✔ Lower bucket mainenance costs. ✔ Provide better bucket penetration. ✔ Bigger payloads.

Blade Type Two styles of Blade Type Sidecutters are effective in average digging conditions. Suitable for most soil conditions and provides a strong wear-resistant cutting edge that helps protect the bucket sides.

Combination For light to moderate digging conditions. The combination sidecutter reduces cost by allowing for replacement of the worn extension blade rather than replacing the more expensive base blade.

Tooth-Type For tough digging conditions. It consists of replaceable tips pinned to side mounted adapters. The adapter accepts all tips available for excavator buckets.

Strike-Off Protects bucket corners from wear. It affords better penetration and offers an additional cutting edge surface due to the sharp half-arrow design. The strike-off design provides protection for the sidecutter/bucket mating surface allowing a used bucket to be fitted with any of the previously discussed sidecutters.

Heavy Duty For tough digging conditions. It has more wear material and covers more of the sidebar for enhanced sidebar and bucket side protection.

Sidebar Protector For extreme digging conditions in high impact applications. Pin-on for easy replacement; reversible for longer life. Two styles available: one- & two-piece design. Dependent on bucket type.

3-101

Excavators BUCKET SIDECUTTER CHART One Piece 311/312 (127 XXXX Buckets), 314 RH LH Bolt Nut 315, B Family Bucket (GP) RH LH Bolt Nut 318, S, B, C and D Family Buckets RH LH Blade Bolt Nut

Blade

Combination

096-4748 096-4747 (8) 8T-0380 (8) 7X-0851 7Y-0357 7Y-0358

174-8043 174-8044

8J-9615 8J-9614

(6) 6I-6371

(4) 6I-6371

(6) 7Y-2146

(6) 2J-3507

(4) 2J-3507

(6) 2J-3507

(2) (6) (8) (6) (8)

Nut Washer Tip Pin Retainer Assembly

(2) 8J-5188

8J-9825 8J-9826

(4) 7Y-2146

(10) 7Y-1136

(4) 2J-3507 (4) 3K-5234

(10) 2J-3507 (10) 3K-5234

(2) 8J-5188

8J-9825 8J-9826

(4) 7Y-1136

(10) 6I-8600

(4) 2J-3507 (4) 3K-5234

(10) 2J-3507 (10) 3K-5234

(2) (10) (8) (18) (10)

8J-9825 8J-9826 4T-6664 7Y-1136 4J-9208 2J-3507 3K-5234

(2) (10) (8) (18) (10)

8J-9825 8J-9826 4T-6664 6I-8600 4J-9208 2J-3507 3K-5234

For D Family use 8E-1468/69. For D Family use (2) 9W-8452. For D Family use 114-0468 HD Pin and 107-3469 HD Retainer.

SIDECUTTERS FOR E70B, 315 GP & 307 GP RH Sidecutter LH Sidecutter Bolts Nuts

3-102

8J-9615 8J-9614 4T-2886 7Y-2146 1J-6762 2J-3507 2J-3506

8J-4951* 8J-4952* (6) 7Y-2146 (6) 2J-3507 (2) 1U-3352** 114-0358*** 114-0359***

Nut Washer Tip Pin Retainer Assembly H and J Family Buckets RH LH Blade Bolt

Models

Tooth

7Y-0204 7Y-0203 (8) 8T-4131 (8) 096-7074

Tip Pin Retainer Assembly E, F, G Family Buckets RH LH Blade Bolt

* ** ***

Strike–Off

E70B

096-7074

315 GP 096-4748 096-4747 (8) 8T-0380 (8) 7X-0851

307 GP 153-1646 153-1647 (6) 096-7074 (6) 8T-4131

8J-4947 8J-4948 (10) 7Y-1136 (10) 2J-3506 (10) 3K-5234 (2) 9W-8552 107-3378 107-8559 8J-4947 8J-9848 (10) 6I-8600 (10) 2J-3507 (10) 3K-5234 (2) 9W-8552 107-3378 107-8554

Excavators SIDECUTTERS FOR B & C SERIES BUCKETS Heavy Duty Sidecutters (RH/LH) Bolts 232-2147/8 (8) 1D-4635

256-8690/1

238-3169/70 Strike-Off Half Arrow 232-2140 (RH Lower/LH Upper) 174-8044 (RH Upper/LH Lower) 195-5133/4 (RH/LH) (2) 195-5136 (Upper)

Nuts (8) 2J-3507

Washers (8) 3K-5234

Compatibility All S buckets* All C buckets* All D buckets* B bucket groups with part numbers 142-2540 and higher 318 family buckets

(10) 1D-4637

(10) 2J-3507

(10) 3K-5234

F bucket groups and corresponding assemblies: 134-5515 and higher G bucket groups and corresponding assemblies: 138-4687 and higher V family buckets W family buckets

(12) 9X-8896

(12) 2J-3507

(12) 3K-5234

J family buckets

(6) 1D-4635

(6) 2J-3507

(6) 3K-5234

B, S, C, D power buckets

(6) 1D-4635

(6) 2J-3507

(6) 3K-5234

B, S, C, D power buckets

(6) 1D-4635

(6) 2J-3507

(6) 3K-5234

F, G, V, W, HB power buckets

* Will fit sidebars with 3-bolt hole pattern. Recommend drilling the 4th hole for best retention.

FORMER SIDEBAR PROTECTORS Model

Bucket Type

Sidebar Protector

Pin

Retainer

375

MX

1U-0740

1U-0739

8E-5559

375

HDR

112-2492

132-1008

132-0999

350

HDR

1U-0740

133-0738

107-8559

330B

HDR & R

8J-4143

9J-8441

8E-5559

325B

HDR & R

8J-4143

9J-8441

8E-5559

322B

HDR & R

8J-4143

9J-8441

8E-5559

320B

HDR & R

8J-4143

9J-8441

8E-5559

CURRENT SIDEBAR PROTECTORS Sidebar Protectors (4) 112-2489

Pin (8) 112-2490

Retainer Assembly (8) 132-0999

(2) 112-2494 (4) 166-2877 (2) 125-0800 (4) 112-2492

(4) (8) (4) (8)

(4) (8) (4) (8)

132-0998 132-0998 8E-4708 132-1008

132-0999 132-0999 4T-4707 132-0999

Compatibility All new style B, S, C and D buckets All old style S, C, D buckets and 318 family buckets All new style E, F, G and H buckets V buckets and new style E, F, G and H buckets W “Spade” buckets J buckets

3-103

Excavators HEX BUCKET REPAIR CORNERS FOR 320/330 HYDRAULIC EXCAVATOR BUCKETS B, S, C, D Linkage Buckets (and equivalent) Repair Corner (RH) Repair Corner (LH)

Part Number 193-4027 193-4028

Width in 1.18

mm 30

Sidecutter/SB Sidebar Protector Hole Pattern 4

SIDECUTTERS FOR B, S, C, D LINKAGE BUCKETS One Piece Heavy Duty Sidecutter Sidecutter RH Sidecutter 7Y-0357 232-2147 LH Sidecutter 7Y-0358 232-2148 Bolts (6) 6I-6371 (8) 1D-4635 Nuts (6) 2J-3507 (8) 2J-3507 Washers (8) 3K-5234 Blade Bolts Nuts

Strikeoff Blade Combination Tooth* Tooth** Sidecutter Sidecutter Sidecutter Sidecutter Sidecutter 232-2140 8J-9615 8J-9615 8J-4951 8E-1469 174-8044 8J-9614 8J-9614 8J-4952 8E-1468 (4) 6I-6371 (6) 7Y-2146 (6) 7Y-2146 (6) 7Y-2146 (4) 2J-3507 (6) 2J-3507 (6) 2J-3507 (6) 2J-3507 (6) 2J-3507

Half Arrow*** Strikeoff Sidecutter 232-2140 174-8044 (6) 1D-4635 (6) 2J-3507 (6) 3K-5234

(2) 4T-2886 (8) 1J-6762 (8) 2J-3506

* Only for B, S, C Buckets with (+J350 tip+pin+retainer). ** Only for D Buckets with (+J450 tip+pin+retainer). *** Heavy Duty Power Buckets use two sets of Half Arrow Strikeoff Sidecutters.

HEX BUCKET REPAIR CORNERS FOR 345/365 HYDRAULIC EXCAVATOR BUCKETS F, G, V, W Linkage Buckets (and equivalent) Repair Corner (RH) Repair Corner (LH)

Part Number 208-5320 208-5321

Width in 1.38

mm 35

Sidecutter/SB Sidebar Protector Hole Pattern 5

SIDECUTTERS FOR F, G, V, W LINKAGE BUCKETS

RH Sidecutter LH Sidecutter Bolts Nuts Washers

Heavy Duty Sidecutter 256-8690 256-8691 (6) 1D-4637 (6) 2J-3507 (10) 3K-5234

HEX BUCKET REPAIR CORNERS FOR 375 HYDRAULIC EXCAVATOR BUCKETS J Linkage Buckets (and equivalent) Repair Corner (RH) Repair Corner (LH)

Part Number 193-4031 193-4032

Width in 1.97

mm 50

SIDECUTTERS FOR J LINKAGE BUCKETS

RH Sidecutter LH Sidecutter Bolts Nuts Washers

3-104

Heavy Duty Sidecutter 238-3169 238-3170 (12) 9X-8896 (12) 2J-3507 (12) 3K-5234

Sidecutter/SB Sidebar Protector Hole Pattern 6

Excavators PRODUCT DESCRIPTION

Base Cutting Edge Assemblies/Base Cutting Edges When selecting base edges, choose the one which is best suited to match the job application. Caterpillar currently offers five basic base edge options for excavator buckets. Front Shovel Use these base edge assemblies on front shovel buckets of larger model machines. The spade design gives better penetration and more wear material up front for extended service life. trailing

leading

Backhoe These base edges are serviced as an assembly (cutting edge & adapters) for the larger model excavators and for other excavators they are serviced as a base edge with no adapters welded in place. Most of these edges are shorter at the rear of the edge than at the leading edge. When making bucket width measurements, remember to measure both the trailing edge and leading edge length. Rock Bucket These edges are serviced only as an assembly and have a shorter length at the rear of the cutting edge than at the leading edge. The major difference between rock and backhoe base edges are that the rock edges are thicker.

Mass Excavation These edges are designed similar to the backhoe and rock edges. They are the longest edge assemblies that Caterpillar offers.

Clamshell Use these edges on clamshell buckets. They come as edge assemblies (base edge and adapters) and base edges. These edges are designed as a rectangle with the trailing and leading edge being the same length. Also, some of the clamshell cutting edges have bolt holes for bolt-on adapters. These are used on smaller model machines.

3-105

Excavators

Outline A) Select Appropriate GET System. (See “Excavator Bucket Conversion Options” chart, below). B) Determine Bucket Width and Cutting Edge Thickness. (See “How to Take Measurements” and “Recommended Base Edge Thickness by Excavator Weight”). C) Select Base Edge, Attachments and installation procedures. — Front Shovel Buckets — — Backhoe Buckets — — Rock Buckets — — Mass Excavation Buckets — — Clamshell Buckets — D) Complete Ground Engaging Tools Conversion Report Form (PEEP4210).

Excavator Bucket Conversion Options Bucket Type FRONT SHOVEL

Bucket Conversion Edge Type

Component Attachment Method

Front Shovel

Weld-On

Two-Strap Adapters Tips

Backhoe BACKHOE

Bucket Components

Rock

Two-Strap Adapters Weld-On

Tips

Mass Excavation Backhoe ROCK

Rock

Two-Strap Adapters Weld-On

Tips

Mass Excavation MASS EXCAVATION

Two-Strap Adapters Mass Excavation

Weld-On Tips Two-Strap Adapters Weld-On Tips

CLAMSHELL

Clamshell Bolt-On Adapters Bolt-On Tips

3-106

Excavators

How to Take Measurements for Base Edge Conversions/Replacements

Base Edge Thickness

Width

Recommended Base Edge Thickness by Excavator Weight Excavator Weight* (Includes Bucket) lb kg 25,000-50,000 50,000-70,000 70,000-110,000 110,000-200,000

11,350-22,700 22,700-31,780 31,780-49,940 49,940-90,800

Recommended Base Edge Thickness in mm

Caterpillar Model 206-215, E110, E120, E140, E180, E200B, 320 225, E300, 219, E240B, 325, 330, 231 235**, E450 245, E650

1.00-1.25 1.25-1.88 1.88-2.25 2.25-2.50

25.40-31.75 31.75-47.75 47.75-57.15 57.15-63.50

* Refer to most recent “Machine Classification” information for further weight information. ** The 235 Front Shovel has a 2.36" (60 mm) thick cutting edge.

Selection Once you have measured the bucket width, OUTER SIDEBAR TO OUTER SIDEBAR, and determined base edge thickness, turn to the following charts. 1. Select a base edge with length closest to, but not less than, the width of the bucket. The width of the bucket must measure between the uncut length of the edge and its minimum cut length as indicated on the chart. 2. The edge selected should be similar in thickness to the edge already in the bucket. 3. Choose the adapters and tips from columns below each selected base edge. REMEMBER: Since all buckets are different, there is no “standard” way to convert buckets. Final decisions on weldments, cutting, etc...must be made by the dealer. NOTE: In many cases the minimum cut length for an edge is the same dimension as the regular length for another edge.

3-107

Excavators L1

W

L1

W

L2

A

TYPE 1

B

L2

B

A

TYPE 2

FRONT SHOVEL BASE EDGE ASSEMBLIES — inches (mm) Length 1 Length 2 Width Thickness Base Edge Assembly Base Edge Type Adapters Per Edge* Dimension “A” Dimension “B” Weld-On Two-Strap Corners Long Tip♦

74.75 (1900) 74.75 (1900) 22.4 (569) 2.36 (60) 4V-5751 4V-5749 2 4 2.95 (79.9) 13.75 (349.3) (3) 8E-4465*♦♦ (3) 8E-4466*♦♦ 3V-4926/7 9W-8452

* Identifies number of adapters actually welded to edge assembly. ♦ See tip options chart. ♦♦ Use 8E-0468 Pin and 8E-0469 Retainer with this Adapter.

3-108

72.0 (1829) 72.0 (1829) 20.5 (521) 2.36 (60) 6W-1362 6W-1363 2 6 3.1 (78.5) 13.2 (335) (3) 8E-4465*♦♦ (3) 8E-4466*♦♦ None 9W-8452

Excavators

BACKHOE BASE EDGE ASSEMBLIES — inches (mm) Length 1

76.93 (1954)

Length 2 Type Width Thickness Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A”

3 14.96 (380) 2.36 (60) 108-1065 108-1066 6I-6555/6 6I-6554 6 14.09 (358)

Dimension “B” Long Tip♦ Router Plates RH LH Length 1 Type Width Thickness Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Long Tip♦ Router Plates RH LH

9W-8552

76.00 (1932) 76.00 (1932) 3 10.50 (267) 1.25 (32) 6W-3658 6W-3646 1U-1304** 1U-1304** 6

14.45 (367) 1U-3302

100-5646 100-5649

73.6 (1870)

70.87 (1800)

70.24 (1784)

70.24 (1784)

67.91 (1725)

3 14.96 (380) 2.36 (60) 138-2395 4I-4093 6I-6555/6 6I-6554 6 13.5 (343)

1 11.81 (300) 1.25 (32)

3 15.75 (400) 1.97 (50) 137-4111 137-4104 6I-6465/6 6I-6464 7 10.91 (277)

3 12.8 (325) 1.96 (50) 128-5389 128-5390 6I-6465/6 6I-6464 7 10.91 (277)

1 11.10 (282) 1.25 (32)

9W-8552

9W-8452

9W-8452

138-4720 138-4721

136-6265 136-6268

119-0030 119-0032

7Y-7731

0

8R-2662

0

66.89 (1699) 3 12.80 (325) 1.97 (50) 109-8487 101-2240 6I-6465/6 6I-6464 6 12.76 (324) 9W-8452

66.14 (1680) 3 14.96 (380) 2.36 (60) 138-4728 138-4729 6I-6555/6 6I-6554 6 12.00 (305) 9W-8552

65.31 (1659) 3 12.80 (325) 1.96 (50) 128-5379 128-5380 6I-6465/6 6I-6464 6 12.09 (307) 9W-8452

65.31 (1659) 3 15.75 (400) 1.97 (50) 137-4110 137-4103 6I-6465/6 6I-6464 6 12.09 (307) 9W-8452

65.30 (1658) 3 12.00 (305) 1.75 (44.5) 127-2316 127-2317 6I-6405/6 6I-6404 7 10.08 (256) 7T-3402

61.18 (1554) 3 12.80 (325) 1.96 (50) 109-8486 4I-4115 6I-6465/6 6I-6464 6 11.61 (295) 9W-8452

59.45 (1510) 3 11.80 (300) 1.57 (40) 108-3569 9C-3328 6I-6355/6 6I-6354 7 9.21 (234) 1U-3352

104-6993 104-6994

138-4720 138-4721

119-0030 119-0032

136-6265 136-6268

6I-5206 6I-5207

104-6993 104-6994

105-6588 105-6588

* Indicates adapters already welded to edge assembly (Type 2). Corner adapters must be ordered separately. ** Flushmount adapter. ♦ See tip options chart. NOTE: Some base edge assemblies are not available worldwide. Check with Parts Distribution Center to determine availability.

3-109

Excavators

BACKHOE BASE EDGE ASSEMBLIES — inches (mm) continued Length 1 Type Width Thickness Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Long Tip♦ Router Plates RH LH Length 1

59.21 (1504) 3 15.75 (400) 1.97 (50) 137-4109 137-4102 6I-6465/6 6I-6464 6 10.87 (276) 9W-8452

59.21 (1504) 3 12.80 (325) 1.96 (50) 128-5366 128-5367 6I-6465/6 6I-6464 6 10.87 (276) 9W-8452

59.09 (1501) 3 12.00 (305) 1.75 (44.5) 127-2304 127-2305 6I-6405/6 6I-6404 7 9.02 (229) 7T-3402

58.43 (1484) 3 11.80 (300) 1.57 (40) 129-1539 129-1540 6I-6355/6 6I-6354 7 9.05 (230) 1U-3352

56.85 (1444) 3 11.81 (300) 1.57 (40) 6I-5198 5I-3345 6I-6355/6 6I-6354 6 10.55 (268) 1U-3352

55.27 (1404) 3 12.00 (305) 1.77 (45) 6I-5220 5I-3494 6I-6405/6 6I-6404 5 12.99 (330) 7T-3402

54.06 (1373) 3 12.00 (305) 1.75 (44.5) 127-2296 127-2297 6I-6405/6 6I-6404 6 9.84 (250) 7T-3402

136-6265 136-6268

119-0030 119-0032

6I-5206 6I-5207

104-2104 104-2106

5I-3341 5I-3337

7Y-7478 7Y-7671

6I-5206 6I-5207

53.90 (1369)

53.89 (1369)

53.31 (1354)

53.27 (1353)

53.11 (1349)

3 12.80 (325) 1.96 (50)

3 15.75 (400) 1.97 (50)

3 11.80 (300) 1.57 (40)

3 12.00 (305) 1.77 (45)

52.50 (1334) 51.88 (1318) 1 9.00 (229) 1.25 (31.8)

117-8975 123-3478 6I-6465/6 6I-6464 5 12.20 (310)

137-4108 137-4101 6I-6465/6 6I-6464 5 12.20 (310)

129-5719 129-5720 6I-6355/6 6I-6354 7 8.30 (210)

7I-3397 7I-3398 6I-6405/6 6I-6404 5 12.48 (317)

9W-8452

9W-8452

1U-3352

7T-3402

53.12 (1350) 52.50 (1332) 2 10.00 (254) 1.50 (38.1) 47.12 (1197) 2V-1788 2V-1790 3G-8355/6 3G-8354 4 11.55 (293.4) 10.00 (254) 1U-3352

134-1927 134-1926

136-6265 136-6268

133-2242 133-2242

7Y-7570 7Y-7672

8K-3051 8K-3050

Length 2 Type Width Thickness Min. Cut Length (For Conversion) Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Dimension “B” Long Tip♦ Router Plates RH LH

* Indicates adapters already welded to edge assembly (Type 2). Corner adapters must be ordered separately. ♦ See tip options chart. NOTE: Some base edge assemblies are not available worldwide. Check with Parts Distribution Center to determine availability.

3-110

3 11.81 (300) 1.57 (40)

6I-5248 5I-3446 6I-6355/6 6I-6354 6 9.80 (249)

5C-5839 5C-5719

0

1U-3352 7Y-7534 7Y-7668

6A-8765 6A-8766

Excavators

BACKHOE BASE EDGE ASSEMBLIES — inches (mm) continued Length 1 Type Width Thickness Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Long Tip♦ Router Plates RH LH Length 1

50.79 (1290) 3 7.87 (200) 1.26 (32) 127-6112 127-6113 119-3253 6 9.61 (244) 1U-3252

47.40 (1204)

Length 2 Type Width Thickness Min. Cut Length (For Conversion) Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A”

3 12.00 (305) 1.75 (44.5)

104-5748 100-4287 6I-6405/6 6I-6404 5 11.02 (280)

48.58 (1234) 0 14.96 (380) 2.36 (60) 123-4101 123-4102 6I-6555/6 6I-6554 4 14.02 (356) 9W-8552

48.26 (1226) 3 12.00 (305) 1.75 (44.5) 127-2289 127-2290 6I-6405/6 6I-6404 5 10.83 (275) 7T-3402

47.64 (1210) 3 12.80 (325) 1.96 (50) 123-3220 123-3221 6I-6465/6 6I-6464 5 10.91 (277) 9W-8452

47.64 (1210) 3 15.75 (400) 1.97 (50) 137-4107 137-4100 6I-6465/6 6I-6464 5 10.91 (277) 9W-8452

47.52 (1207) 3 11.80 (300) 1.57 (40) 129-5714 129-5715 6I-6355/6 6I-6354 6 8.70 (221) 1U-3352

47.32 (1202) 3 11.81 (300) 1.57 (40) 7I-3379 7I-3380 6I-6355/6 6I-6354 5 11.14 (283) 1U-3352

135-0714 135-0715

6I-5206 6I-5207

134-1927 134-1926

136-6265 136-6268

104-2104 104-2106

7Y-7534 7Y-7668

46.62 (1185) 46.0 (1169) 1 9.00 (229) 1.25 (31.8)

44.88 (1140)

43.70 (1110)

42.36 (1076)

1 7.87 (200) 1.26 (32)

2 8.66 (220) 0.79 (20)

41.97 (1066) 41.34 (1050) 1 9.00 (229) 1.25 (31.8)

5C-5840 5C-5718

127-6110 127-6111

7Y-6601

0

119-3253 6 8.35 (212)

42.52 (1080) 40.87 (1038) 0 11.81 (300) 1.57 (40) 41.46 (1053) 9C-8019 9C-8020 6I-6355/6 6I-6354 5 14.0 (355.6) 9.68 (246) 1U-3352

0

Dimension “B” Long Tip♦ Router Plates RH LH

7T-3402 117-8955 117-8958

1U-3252 6A-8765 6A-8766

3 12.00 (305) 1.75 (44.5)

126-3718 127-4622 6I-6405/6 6I-6404 5 9.37 (238)

9V-4774 9V-4773

0

7T-3402 134-1919 134-1925

6A-8765 6A-8766

* Indicates adapters already welded to edge assembly (Type 2). Corner adapters must be ordered separately. ♦ See tip options chart. NOTE: Some base edge assemblies are not available worldwide. Check with Parts Distribution Center to determine availability.

3-111

Excavators

BACKHOE BASE EDGE ASSEMBLIES — inches (mm) continued Length 1 Type Width Thickness Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Long Tip♦ Router Plates RH LH Length 1 Length 2 Type Width Thickness Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A”

41.81 (1062) 3 12.80 (325) 1.96 (50) 128-2954 128-2957 6I-6465/6 6I-6464 4 12.36 (314) 9W-8452

41.81 (1062) 3 15.75 (400) 1.97 (50) 137-4106 137-4099 6I-6465/6 6I-6464 4 12.36 (314) 9W-8452

41.57 (1056) 3 12.00 (305) 1.75 (45) 104-5747 100-4279 6I-6405/6 6I-6404 0 9.19 (233.5) 7T-3402

6I-6405/6 6I-6404 4 12.75 (324) 7T-3402

8E-9490 5 8.31 (211) 1U-3302

119-0030 119-0032

136-6265 136-6268

6I-5206 6I-5207

7Y-7570 7Y-7672

40.75 (1035) 40.12 (1019) 1 9.00 (229) 1.25 (31.8) 5C-5841 5C-5717

38.98 (990)

37.87 (962)

0 7.87 (200) 1.26 (32) 127-6108 127-6109

2 28.66 (728) 2.75 (70) 105-2501 a 105-2519 (2) 107-8605/6 a 107-8604 5 8.88 (225.5) 10.02 (255.5) 6I-6602

36.80 (934) 36.50 (927) 1 5.90 (150) 0.80 (20)

0

119-3253 5 9.02 (229)

Dimension “B” Long Tip♦ Router Plates RH LH

1U-3252

41.57 (1056) 3 12.00 (305) 1.77 (45) 100-4278

9R-4146

0

41.50 (1054) 2 11.41 (290) 1.42 (36) 100-4139 100-4140

41.34 (1050) 3 14.96 (380) 2.36 (60) 105-3622 105-3623 6I-6555/6 6I-6554 3 17.44 (453) 9W-8552

100-5352 100-5354

41.42 (1052) 3 11.81 (300) 1.57 (40) 6I-5193 7Y-7541 6I-6355/6 6I-6354 5 9.68 (246) 1U-3352 8K-3093/2 5I-3341 5I-3337

36.46 (926)

35.79 (909)

35.59 (904)

3 12.00 (305) 1.75 (44.5) 127-2282 127-2283 6I-6405/6 6I-6404 4 10.55 (268)

3 11.80 (300) 1.57 (40) 127-8633 127-8634 6I-6355/6 6I-6354 5 7.95 (202)

3 11.41 (290) 1.42 (36) 100-4149 100-4150

7T-3402

1U-3352

1U-3302

6I-5206 6I-5207

134-1906 134-1907

7Y-7421 7Y-7425

8E-9490 5 9.80 (249)

9R-3025/6 6A-8765 6A-8766

105-2511 105-2511

* Indicates adapters already welded to edge assembly (Type 2). Corner adapters must be ordered separately. a 2 of each for a total of 4. The edge assembly includes a 107-8604 and (2) 107-8605. (2) 107-8606 must be ordered separately. ♦ See tip options chart. NOTE: Some base edge assemblies are not available worldwide. Check with Parts Distribution Center to determine availability.

3-112

135-0714 135-0715

Excavators

BACKHOE BASE EDGE ASSEMBLIES — inches (mm) continued Length 1

35.51 (902)

35.20 (894)

35.20 (894)

3 11.8 (300) 1.57 (40)

3 15.75 (400) 1.97 (50)

3 12.80 (325) 1.96 (50)

132-8418 7Y-7611 6I-6355/6 6I-6354 5 7.87 (200)

137-4105 137-4098 6I-6465/6 6I-6464 3 15.04 (382)

105-2533 100-4362 6I-6465/6 6I-6464 3 15.06 (383)

1U-3352

9W-8452

9W-8452

3G-8355/6 3G-8354 3 9.60 (243.8) 8.00 (203.2) 1U-3352

7Y-7534 7Y-7668

136-6265 136-6268

119-0030 119-0032

8K-3051 8K-3050

6A-8765 6A-8766

6A-8765 6A-8766

31.89 (810)

30.40 (772) 30.0 (762) 1 5.90 (150) 0.63 (16)

29.76 (756)

29.65 (753)

29.29 (744)

27.60 (701)

27.17 (690)

3 11.8 (300) 1.57 (40) 104-2097 100-5361 6I-6355/6 6I-6354 4 8.50 (216) 1U-3352

3 11.8 (300) 1.57 (40) 105-2761 100-4345 6I-6405/6 6I-6404 3 12.40 (315) 7T-3402

3 12.80 (325) 1.96 (50) 105-2532 100-4354 6I-6465/6 6I-6464 3 12.13 (308) 9W-8452

2 25.20 (640) 2.36 (60) 105-9716 a 105-9717 107-8555/6 a 107-8554 3 8.94 (227) 9W-8552

3 7.87 (200) 1.26 (32) 127-6104 127-6105

118-8711 118-8709

105-9724 105-9724

Length 2 Type Width Thickness Min. Cut Length (For Conversion) Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Dimension “B” Long Tip♦ Router Plates RH LH Length 1 Length 2 Type Width Thickness Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Long Tip♦ Router Plates RH LH * ** a ♦

3 7.87 (200) 1.26 (32) 102-7620 102-7635 6Y-3254 5 6.99 (177.5) 1U-3252

5G-3691 8J-7525** 5

35.12 (892) 34.50 (876) 2 10.00 (254) 1.50 (38.1) 29.88 (759) 8K-3335

35.12 (892) 34.80 (884) 1 8.81 (224) 1.25 (31.8)

34.88 (886) 34.21 (869) 1 9.00 (229) 1.25 (31.8)

33.07 (840)

9V-3997 9V-3998 3G-6305/6 3G-6304 3

5C-5842 5C-5716 3G-6305/6 3G-6304 3

127-6106 127-6107

3 7.87 (200) 1.26 (32)

119-3253 4 10.31 (262)

1U-3252

119-3253 4 8.15 (207) 1U-3252

9R-3025/6 102-7622 102-7623

Indicates adapters already welded to edge assembly (Type 2). Corner adapters must be ordered separately. Bottom strap adapter. Bucket has 2 of each corner adapter for a total of 4. The edge assembly includes 107-8554 and (2) 107-8555. (2) 107-8556 must order separately. See tip options chart.

NOTE: Some base edge assemblies are not available worldwide. Check with Parts Distribution Center to determine availability.

3-113

Excavators

BACKHOE BASE EDGE ASSEMBLIES — inches (mm) continued Length 1 Length 2 Type Width Thickness Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Long Tip♦ Router Plates RH LH Length 1

24.80 (630) 24.48 (622) 1 5.90 (150) 0.80 (20)

24.00 (609) 23.60 (600) 1 7.90 (200) 1.00 (25)

9R-2546

9R-5317

8J-7525** 0

8J-7525** 0

9R-3025/6

9R-3025/6

Thickness Base Edge Assembly Base Edge Center Adapters Adapters Per Edge* Dimension “A” Long Tip♦ Router Plates * ** a ♦

3 11.80 (300) 1.57 (40) 104-2096 100-6481 6I-6355/6 6I-6354 3 9.80 (249) 1U-3352

23.30 (592) 23.00 (584) 1 8.90 (226) 1.25 (32) 5V8068 5V-8047 3G-6305/6 3G-6304 0

6A-8765/6

9R-3025/6

104-2104 a 104-2106 a 15.75 (400)

Length 2 Type Width

23.86 (606)

3 6.30 (160) 0.87 (22) 113-2079 86-2658 7I-2582 3 6.30 (160) 6Y-3222 9R-4194/5

12.50 (317) 12.50 (317) 1 5.90 (150) 0.80 (20) 9R-4147 8J-7525** 0

Indicates adapters already welded to edge assembly (Type 2). Corner adapters must be ordered separately. Bottom strap adapter. Use 134-1906 and 134-1912 for HDR applications (Heavy Duty Rock). See tip options chart.

NOTE: Some base edge assemblies are not available worldwide. Check with Parts Distribution Center to determine availability.

3-114

18.80 (477) 18.50 (470) 1 5.90 (150) 0.80 (20)

18.40 (468) 18.00 (458) 1 5.90 (150) 0.63 (16)

18.00 (457) 17.70 (450) 1 7.90 (200) 1.00 (25)

9R-2545

5G-3689

9R-5318

8J-7525** 0

8J-7525** 0

8J-7525** 0

9R-3025/6

Excavators

ROCK BUCKET BASE EDGE ASSEMBLIES — inches (mm) Length 1 Length 2 Type Width Thickness

50.12 (1274) 48.58 (1234) 2 18.8 (479) 2.50 (63.5)

Min. Cut Length Base Edge Assembly Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Dimension “B” Long Tip♦

5V-5081 5V-5082 3G-9495/6 (4) 3G-9494 4 2.70 (68.6) 14.90 (378.5) 9W-8552

48.12 (1222) 47.00 (1195) 2 15.0 (381) 2.25 (57.2) 40.88 (1038) 5V-0191 5V-0184 6I-6555/6 (2) 6I-6554 2 16.90 (429.3) 14.35 (364.5) 9W-8552

43.00 (1092)

3 11.81 (300) 1.57 (40)

6I-5187 6I-6355/6 6I-6354 5 10.08 (256)

1U-3352

* Indicates adapters already welded to edge assembly. Corner adapters must be ordered with Type 2 edges. ♦ See tip options chart.

3-115

Excavators

MASS EXCAVATION BASE EDGE ASSEMBLIES — inches (mm) Length 1 Length 2 Type Width Thickness Min. Cut Length (For Conversion) Base Edge Assembly* Base Edge Corner Adapters Center Adapters Adapters Per Edge* Dimension “A” Dimension “B” Long Tip♦

82.28 (2090) 82.28 (2090) 2 12.00 (305) 1.75 (45)

80.2 (2037)

67.0 (1703)

3 19.69 (500) 3.15 (80)

3 19.69 (500) 3.15 (80)

9V-5067 9V-4088 1U-1355/6 1U-1354 6 2.58 (66) 15.55 (395) 9W-8552

133-8868 133-8869 113-9605/6 113-9604 6 14.60 (370)

135-3715 135-3716 113-9605/6 113-9604 5 15.00 (380)

6I-6602

6I-6602

* Indicates adapters actually welded to assembly. Left and right corners would have to be ordered separately. (Type 2) ♦ See tip options chart.

3-116

62.00 (1575) 61.25 (1557) 2 10.00 (254) 1.50 (38.1) 52.95 (1345) 5V-0157 5V-0166 3G-8355/6 (4) 3G-8354 4 13.15 (334) 11.90 (302.3) 1U-3352

58.82 (1494)

55.47 (1409)

3 12.00 (305) 1.77 (45)

3 12.80 (325) 1.97 (50)

6I-5224 6I-6405/6 6I-6404 6 11.10 (282)

7Y-7793 7Y-7794 6I-6465/6 6I-6464 4 17.38 (441.4)

7T-3402

9W-8452

Excavators

CLAMSHELL BASE EDGE ASSEMBLIES — inches (mm) Length 1 Length 2 Type Width Thickness Number of Holes Base Edge Adapters Per Edge Dimension “A” Dimension “B” Bolt-On Bolts Nuts Long Tip**

42.12 (1070) 42.12 (1070) 1 7.80 (200) 1.00 (25.4) 8 5C-3319* 4 6.88 (174.8) 9.45 (240) 9J-4384 (4) 4F-4042 (4) 8J-2928 (8) 8J-2933 1U-3202

42.12 (1070) 42.12 (1070) 1 7.80 (200) 1.00 (25.4) 10 5C-3320* 5 2.15 (54.6) 9.45 (240) 9J-4384 (5) 4F-4042 (5) 8J-2928 (10) 8J-2933 1U-3202

36.25 (920) 36.25 (920) 1 7.80 (200) 1.00 (25.4) 8 5C-0858* 4 82.75 (69.9) 10.24 (260.1) 9J-4384 (4) 4F-4042 (4) 8J-2928 (8) 8J-2933 1U-3202

36.25 (920) 36.25 (920) 1 7.80 (200) 1.00 (25.4) 6 5C-0859* 3 7.88 (200.2) 10.24 (260.1) 9J-4384 (3) 4F-4042 (3) 8J-2928 (6) 8J-2933 1U-3202

* Cutting Edge (Order All Adapters Separately). ** See tip options chart.

3-117

Excavators

L

T W

BUCKET BASE EDGES WITHOUT HOLES (GP, ROCK, EXCAVATOR, BACKHOE LOADER) Length (L) inch mm

Width (W) inch mm

Thickness (T) inch mm

93.3 70.9 55.1 31.5 62.0 41.1 59.4 64.8 53.0 67.5

7.9 7.9 10.5 10.5 10.0 10.0 11.8 12.8 12.8 14.9

0.79 0.79 1.25 1.25 1.50 1.50 1.57 2.00 2.00 2.36

2370 1800 1400 800 1575 1045 1510 1646 1346 1714

200 200 270 270 254 254 300 325 325 380

20 20 32 32 38 38 40 50 50 60

Base Edge 5W-7958 5W-7955 5W-7952 5W-7941 5V-0166 8K-0668 9C-3328 9C-3955 9C-3891 8R-0982

STRAIGHT BASE EDGES WITHOUT HOLES (GP, ROCK, EXCAVATOR, BACKHOE LOADER) 82.0 36.5 24.5 98.4 87.4 88.2 35.4 23.6 110.2 24.0 127.0 105.7 127.0 114.0 52.5 35.1 150.0 136.0 118.0 100.4 92.4 150.0 136.0 118.0 96.0 53.5 35.8 115.5 106.0 122.8 134.3 129.4 120.7 143.5 129.5 122.0 106.8 169.8 187.0 3-118

2080 928 622 2500 2219 2240 900 600 2799 609 3226 2686 3226 2890 1335 892 3810 3455 2998 2551 2346 3810 3455 2998 2439 1360 910 2934 2690 3120 3410 3287 3067 3645 3290 3099 2714 4313 4750

6.0 6.0 6.0 7.5 7.5 6.0 10.5 10.5 8.0 7.9 9.0 9.0 9.6 9.6 9.0 8.9 10.5 10.5 10.5 10.5 10.5 11.1 11.1 11.1 11.1 11.1 11.1 11.4 11.4 11.4 12.0 12.0 12.0 13.0 13.0 13.0 13.0 17.5 21.3

150 150 150 191 191 150 270 270 203 200 229 229 245 245 229 226 267 267 267 267 267 282 282 282 282 282 282 290 290 290 305 305 305 330 330 330 330 442 541

0.63 0.63 0.63 0.75 0.75 0.79 1.25 1.25 1.00 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.57 1.57 1.57 1.77 1.77 1.77 2.00 2.00 2.00 2.00 2.25 2.50

16 16 16 19 19 20 32 32 25 25 25 25 25 25 32 32 32 32 32 32 32 32 32 32 32 32 32 40 40 40 45 45 45 51 51 51 50 57 63.5

6S-4738 5G-3897 5G-3488 5G-4642 5G-5764 9R-0316 5W-7943 5W-7937 6K-7099 9R-5317 8K-9916 1V-3915 5V-7415 5V-7418 5C-5719 9V-3998 8K-9914 8K-9913 8K-9915 9V-5328 9V-5340 7V-0779 7V-0780 7V-0781 7V-0782 9C-7316 6W-9175 9V-5283 9V-5287 8V-6275 8V-6274 2V-6118 8K-5000 9V-0232 9V-0235 9V-0237 9V-0255 9V-0009 9V-0007

Excavators BASE EDGE ASSEMBLY REPLACEMENT CHART* Base Edge Assembly 8K-4158 8K-4159 8K-4160 8K-4161 1V-8342 4V-2948 4V-3372 8V-5507 9V-2321 8K-3298 8K-3292 8K-3308 6W-7608 8K-3301 1V-7015 5V-0232 2V-6891 4V-9061 3V-4478 3V-1713 8K-3335 9V-4731 8K-3338 8K-3341

Replacement Base Edge 8R-0982 8R-0982 8R-0982 8R-0982 8R-0982 8R-0982 9V-2323 9V-2323 9V-2323 9C-3891 9C-3891 9C-3891 9C-3891 9C-3891 9C-3891 9C-3891 9C-3955 9C-3955 8K-0668 8K-0668 8K-0668 8K-0668 8K-0668 5V-0166

Machine Model 245 245 245 245 245 245 245 245 245 235 235 235 235 235 235 225 235 235 225 225 225 225 225/215 225

* Listed base edge assemblies have been replaced by a universal base edge. Adapters must be ordered along with the replacement base edge.

REPLACEMENT BASE EDGE DIMENSIONS L1 inch 98.0 93.0 78.7 46.7 76.9 55.9 50.0 44.0 70.2 64.8 53.9 65.3 48.3 58.4 47.5 62.0 41.1 53.1 41.5

L2 mm 2490 2363 1999 1185 1954 1422 1270 1118 1784 1646 1369 1658 1226 1484 1207 1575 1045 1349 1054

inch 96.3 89.5 75.0 43.0 73.2 55.9 50.0 44.0 67.7 62.3 51.4 63.5 46.5 57.2 46.3 61.3 40.4 51.5 39.9

W mm 2445 2273 1905 1091 1860 1422 1270 1118 1720 1582 1305 1614 1182 1453 1176 1557 1027 1308 1014

inch 19.7 19.7 15.0 15.0 15.0 15.0 15.0 15.0 15.8 12.8 15.8 12.0 12.0 11.8 11.8 10.0 10.0 11.4 11.4

T mm 500 500 380 380 380 380 380 380 400 325 400 305 305 300 300 254 254 290 290

inch 3.54 3.15 2.76 2.76 2.36 2.36 2.36 2.36 1.97 1.97 1.97 1.75 1.75 1.57 1.57 1.50 1.50 1.42 1.42

mm 90.0 80.0 70.0 70.0 60.0 60.0 60.0 60.0 50.0 50.0 50.0 44.5 44.5 40.0 40.0 38.0 38.0 36.0 36.0

Base Edge 211-2757 119-3174 6I-5303 100-6198 108-1066 264-2183 264-2182 264-2181 137-4104 9C-3955 137-4101 127-2317 127-2290 129-1540 129-5715 5V-0166 8K-0668 7I-6713 100-4150

Model 385 375 375 375 245/350/375 322/325/345 322/325/345 322/325/345 345 235/330/350 345 231/325/330 231/325/330 225/320/322/325 225/320/322/325 215/225 215/225 215/225/320 215/225/320

3-119

Excavators

TYPE 2

TYPE 1

EXCAVATOR BUCKET BASE EDGE DIMENSIONS* L1

L2

inch

mm

inch

mm

inch

mm

inch

mm

Edge** Assembly

92.50 92.50 84.02 83.46 82.28 79.40 76.06 74.75 74.25 72.00 70.98 70.00 66.38 62.00 59.00 59.00 53.12 53.39 52.50 52.50 50.12 48.12 47.12 47.40 47.00 46.62 42.28 42.00 41.45 41.38 41.38 41.12 40.88 40.75 35.51 35.20 35.12 35.12 34.88 34.88 29.88 29.45 29.21 23.88 23.30

2350 2350 2134 2120 2090 2016 1932 1900 1886 1829 1803 1779 1686 1575 1499 1499 1350 1356 1334 1334 1274 1222 1197 1204 1194 1185 1074 1066 1053 1051 1051 1045 1039 1035 902 895 892 892 886 886 760 748 742 608 592

92.50 92.50 84.02 83.46 82.28 78.30 76.06 74.75 73.25 72.00 70.98 69.12 65.38 61.25 58.12 57.88 52.50 52.50 51.88 51.88 48.58 47.00 46.50 46.50 45.87 46.00 41.22 41.30 40.59 40.50 40.50 40.38 39.88 40.12 34.68 35.20 34.50 34.80 33.88 34.21 29.88 28.58 28.90 23.88 23.00

2350 2350 2134 2120 2090 1989 1932 1900 1859 1829 1803 1757 1659 1557 1476 1470 1332 1334 1318 1318 1234 1195 1180 1181 1165 1169 1047 1050 1031 1029 1029 1027 1013 1019 881 894 876 884 861 869 760 726 734 608 584

27.5 27.5 28.0 15.0 12.0 15.0 10.5 22.4 15.0 20.5 12.2 12.2 15.0 10.0 12.2 15.0 10.0 12.2 15.0 9.0 18.8 15.0 10.0 12.2 15.0 9.0 15.0 9.0 12.2 12.2 12.2 10.0 15.0 9.0 12.2 10.0 10.0 8.8 15.0 9.0 10.0 12.2 8.9 10.0 8.9

697 697 712 381 305 381 267 569 381 521 310 311 381 254 381 381 254 311 381 229 479 381 254 311 381 229 381 229 311 311 311 254 381 229 311 254 254 224 381 229 254 311 226 254 226

2.50 2.50 2.50 2.25 1.75 2.25 1.25 2.36 2.25 2.36 1.88 1.88 2.25 1.50 1.88 2.24 1.50 1.88 2.24 1.25 2.50 2.25 1.50 1.88 2.25 1.25 2.25 1.25 1.88 1.88 1.88 1.50 2.25 1.25 1.88 1.50 1.50 1.25 2.25 1.25 1.50 1.88 1.77 1.50 1.77

63.5 63.5 63.5 57.2 45.0 57.2 32.0 60.0 57.2 60.0 47.5 47.5 57.2 38.1 47.5 57.2 38.1 47.5 57.2 31.8 63.5 57.2 38.1 47.5 57.2 31.8 57.2 31.8 47.5 47.5 47.5 38.1 57.2 31.8 47.5 38.1 38.1 31.8 57.2 31.8 38.1 47.5 45.0 38.1 45.0

2V-1845 2V-0553 9V-2395 9V-2321 9V-5067 8V-5507 6W-3658 4V-5751 4V-3372 6W-1362 6W-0875 4V-9061 4V-2948 5V-0157 2V-6891 1V-8342 2V-1790 1V-7015 8K-4161 5C-5719 5V-5081 5V-0191 8K-3341 8K-3301 8K-4160 5C-5718 6W-1861 9V-4773 6W-7608 8K-3308 5V-0232 8K-3338 8K-4159 5C-5717 8K-3292 9V-4731 8K-3335 9V-3998 8K-4158 5C-5716 3V-1713 8K-3298 5V-8046 3V-4478 5V-8047

Bucket Type:

W

FS — Front Shovel

T

T — Trenching

X — Excavating

R — Rock

Adapters

Bucket Type

Edge Type

FS FS MX MX MX X MX FS X MX MX X X X T T T T T T R R T T T T R T T T R T/R T T T T T T T T T T T T T

2 2 2 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

(3) 3G-9495 (3) 3G-9495 (6) 6I-6554 (6) 1U-1354 (4) 1U-1553 (6) 1U-1304 (3) 8E-4465♦ (4) 1U-1553 (3) 8E-4465♦ (6) 159-0464♦ (4) 159-0464♦ (3) 1U-1553 (4) 3G-8354 (4) 159-0464♦ (3) 159-0464♦ (4) 159-0464♦ (3) 1U-1553 (4) 3G-9494 (2) 1U-1553 (4) 3G-8354 (3) 159-0464♦ (2) 1U-1553 (2) 1U-1553 (3) 159-0464♦ (3) 159-0464♦ (2) 159-0464♦ (3) 3G-8354 (2) 1U-1553 (2) 159-0464♦ (3) 3G-8354 (3) 3G-8354 (1) 1U-1553 (2) 3G-8354 (1) 159-0464♦ (1) 3G-8354

MX — Mass Excavation

* All edges require corner adapters except where indicated. ** Part numbers which list adapters are cutting edge assemblies. When no adapter is shown, the part number indicates a bare cutting edge. a No corner adapters needed.

♦ Note: See page 3-76 for J450/J460 update.

3-120

Model 245 a 245 a 245 a 245 a 245 a 245 235 a 235 a 245 235 a 235 a 235 245 225 235 245 225 235 245 215 245 a 235 225 235 245 215 235 215 235 235 225 225/215 245 215 235 225 225 215 245 215 225 235 215 225 215

Excavators NOTES

3-121

Excavators NOTES

3-122

5000 Series Shovels

5000 Series Shovels — Section Contents Page GET Options 5230/5230B Front Shovel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-02 5230/5230B Mass Excavation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-03 5130B Front Shovel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-04 5130B Mass Excavation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-05 5130 Front Shovel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-07 5130 Mass Excavation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-09 5110B Mass Excavation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-12 5080 Front Shovel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-14 Abrasion Packages 5230 Front Shovel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-17 5230 Mass Excavation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-19 5130B Front Shovel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-20 5130B Mass Excavation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21 5130 Front Shovel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22 5130 Mass Excavation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-23 Replacement Base Edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-24 Caterpillar Bucket Offerings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-25 GET Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-27 Installation/Removal Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-36

4-1

5000 Series Shovels 5230/5230B FRONT SHOVEL

5230/5230B FRONT SHOVEL Bucket Description Bucket Arrangement Bowl & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Edge Group Base Edge Assembly Adapter* Center Corner Lug Coupler Coupler (ARM) Pin Retainer Assembly Sleeve Edge Protector Center RH LH Pin Retainer Assembly Bushing Sidebar Protector Collar Cotter Pin Pin Tips General Purpose General Purpose (ARM) Pin Retainer Assembly## Penetration# Pin Retainer Assembly Adapter Nose Plate Wear ARM

High Density 157-4000 157-4001

Rock 142-3590 142-3591

High Abrasion 142-3614 142-3613

Low Density 142-3450 142-3451

20.0 (15.5) V1000

22.0 (17.0) V1000

22.0 (17.0) V1000

26.0 (20.0) V1000

Weld-On Adapters Crested Corner Bottom-Pin Couplers Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Bottom-Pin Couplers Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Bottom-Pin Couplers Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Bottom-Pin Couplers Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Spade-Plate 5.91 (150) 130 (3310) 138 (3510) 148 (3770) 136-1105 (1) 128-6047 (3) (2) (4) (5) (5) (5) (5) (5)

109-3104 125-1100 107-3288 132-1100 109-3101 135-9315 135-9312 135-9314

(2) (2) (8) (8) (8) (2)

143-3105 143-3106 143-3108 140-6889 143-3103 125-1109 168-0887 2H-3775 195-3101

(5) (5) (5) (5) (5) (5) (5)

132-1102 109-3103 138-0100 140-6889 143-3109 138-0101 140-6889 132-1104 (18) 131-0507

Spade-Plate 5.91 (150) 157 (4000) 165 (4200) 176 (4460) (1) 125-1099

Spade-Plate 5.91 (150) 157 (4000) 165 (4200) 176 (4460) 132-1476 (1) 125-1099

(1) 125-1099

(4) (2) (5) (6) (6) (6) (6) (6)

109-3104 125-1100 107-3288 132-1100 109-3101 135-9315 135-9312 135-9314

(4) (2) (5) (6) (6) (6) (6) (6)

109-3104 125-1100 107-3288 132-1100 109-3101 135-9315 135-9312 135-9314

(4) (2) (5) (6) (6) (6) (6) (6)

109-3104 125-1100 107-3288 132-1100 109-3101 135-9315 135-9312 135-9314

(1) (2) (2) (10) (10) (10) (2)

143-3104 143-3105 143-3106 143-3108 140-6889 143-3103 125-1109 168-0887 2H-3775 195-3101

(1) (2) (2) (10) (10) (10) (2)

143-3104 143-3105 143-3106 143-3108 140-6889 143-3103 125-1109 168-0887 2H-3775 195-3101

(1) (2) (2) (10) (10) (10) (2)

143-3104 143-3105 143-3106 143-3108 140-6889 143-3103 125-1109 168-0887 2H-3775 195-3101

(6) (6) (6) (6) (6) (6) (6)

132-1102 109-3103 138-0100 140-6889 143-3109 138-0101 140-6889 132-1104

(6) (6) (6) (6) (6) (6) (6)

132-1102 109-3103 138-0100 140-6889 143-3109 138-0101 140-6889 132-1104 (16) 131-0507

(6) (6) (6) (6) (6) (6) (6)

132-1102 109-3103 138-0100 140-6889 143-3109 138-0101 140-6889 132-1104

Always use a new pin and retainer assembly when installing tips, edge protectors and sidebar protectors. Use 1U-7184 pin removal tool. * See Special Instruction REHS0059 for welding adapters. # One piece tip (no coupler required). ## Grind the tip counterbore if retainer interference occurs with the new larger retainer.

4-2

Spade-Plate 5.91 (150) 157 (4000) 165 (4200) 176 (4460)

5000 Series Shovels 5230/5230B MASS EXCAVATION

5230/5230B MASS EXCAVATION Bucket Description Bucket Arrangement Bucket & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Base Edge Assembly Adapter* Center Corner Lug Coupler Coupler (ARM) Pin Retainer Assembly Sleeve Edge Protector RH LH Pin Retainer Assembly Bushing Sidebar Protector Collar Cotter Pin Pin Tips General Purpose General Purpose (ARM) Pin Retainer Assembly## Penetration# Pin Retainer Assembly Short Pin — Heavy Duty Flex Retaining Sleeve Adapter Nose

High Density 137-4439 178-2420

Rock

Coal

157-4160 157-4161

Low Density 142-3487 142-3488

19.0 (14.5) V1000

21.0 (16.0) V1000

23.5 (18.0) V1000

36.0 (27.5) V680

Weld-On Adapters Bottom-Pin Couplers Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Bottom-Pin Couplers Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Bottom-Pin Couplers Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Top-Pin Tips

125-1998

Spade-Plate 5.91 (150) 131 (3330) 137 (3490) 148 (3770) (1) 137-4451

Spade-Plate 5.91 (150) 142 (3600) 149 (3780) 159 (4040) (1) 125-1104

Spade-Plate 5.91 (150) 142 (3600) 149 (3780) 159 (4040) (1) 125-1104

Straight-Plate 4.00 (102) 161 (4100) 168 (4260) 174 (4410) (1) 125-5698

(3) (2) (4) (5) (5) (5) (5) (5)

109-3104 109-3104 107-3288 132-1100 109-3101 135-9315 135-9312 135-9314

(3) (2) (4) (5) (5) (5) (5) (5)

109-3104 109-3104 107-3288 132-1100 109-3101 135-9315 135-9312 135-9314

(3) (2) (4) (5) (5) (5) (5) (5)

109-3104 109-3104 107-3288 132-1100 109-3101 135-9315 135-9312 135-9314

(7) 109-2684 (2) 109-2684

(2) (2) (8) (8) (8) (2)

143-3105 143-3106 143-3108 140-6889 143-3103 9U-9917 168-0887 2H-3775 188-4887

(2) (2) (8) (8) (8) (2)

143-3105 143-3106 143-3108 140-6889 143-3103 9U-9917 168-0887 2H-3775 188-4887

(2) (2) (8) (8) (8) (2)

143-3105 143-3106 143-3108 140-6889 143-3103 9U-9917 168-0887 2H-3775 188-4887

(5) (5) (5) (5) (5) (5) (5)

132-1102 109-3103 138-0100 140-6889 143-3109 138-0101 140-6889

(5) (5) (5) (5) (5) (5) (5)

132-1102 109-3103 138-0100 140-6889 143-3109 138-0101 140-6889

(5) (5) (5) (5) (5) (5) (5)

132-1102 109-3103 138-0100 140-6889 143-3109 138-0101 140-6889

132-1104

132-1104

132-1104

(9) 6I-8689

(9) 113-9689 (9) 119-9681 (9) 129-9688 (9) 129-9689 119-9680

Always use a new pin and retainer assembly when installing tips, edge protectors and sidebar protectors. Use 1U-7184 pin removal tool. * See Special Instruction REHS0597 for welding adapters. # One piece tip (no coupler required). ## Grind the tip counterbore if retainer interference occurs with the new larger retainer.

4-3

5000 Series Shovels 5130B FRONT SHOVEL

5130B FRONT SHOVEL Bucket Description Bucket Arrangement Bowl & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Edge Group Base Edge Assembly Adapter* Center Corner Lug Edge Protector Center RH LH Pin Retainer Assembly Sidebar Protector Pin Collar Cotter Pin Tips General Purpose Penetration Special Penetration Pin Retainer Assembly Plate Wear ARM

High Density 142-3550 142-3551

Rock 142-3580 142-3581

High Abrasion 142-3585 142-3586

General Purpose 142-3524 157-3988

11.7 (9.0) V810

14.3 (11.0) V810

14.3 (11.0) V810

14.3 (11.0) V810

Weld-On Adapters Crested Corner Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Top-Pin Tips

Spade-Plate 4.72 (120) 108 (2750) 115 (2910) 122 (3110) 135-9791 (1) 138-0820

(1) 138-0821

Spade-Plate 4.72 (120) 131 (3330) 137 (3490) 145 (3690) 142-3499 (1) 138-0821

(3) 188-9814 (2) 188-9810 (4) 107-3436

(4) 188-9814 (2) 188-9810 (5) 107-3436

(4) 188-9814 (2) 188-9810 (5) 107-3436

(2) (2) (8) (8) (2) (2) (2) (2)

171-1815 171-1816 136-8788 140-6889 122-2687 188-4887 168-0887 2H-3775

(5) (5) (5) (5) (5) (14)

188-9812 188-9819 188-9818 152-7818 140-6816 131-0507

Spade-Plate 4.72 (120) 131 (3330) 137 (3490) 145 (3690)

(1) (2) (2) (10) (10) (2) (2) (2) (2)

171-1817 171-1815 171-1816 136-8788 140-6889 122-2687 188-4887 168-0887 2H-3775

(1) (2) (2) (10) (10) (2) (2) (2) (2)

171-1817 171-1815 171-1816 136-8788 140-6889 122-2687 188-4887 168-0887 2H-3775

(6) (6) (6) (6) (6)

188-9812 188-9819 188-9818 152-7818 140-6816

(6) (6) (6) (6) (6) (14)

188-9812 188-9819 188-9818 152-7818 140-6816 131-0507

Always use a new pin and retainer assembly when installing tips, edge protectors and sidebar protectors. Use 1U-7184 pin removal tool. * For welding adapters use Special Instructions (SEHS9810) for V780 in lieu of 5130B instructions being published.

4-4

Spade-Plate 4.72 (120) 131 (3330) 137 (3490) 145 (3690) (1) 157-3990 (4) 188-9814 (2) 188-9810

(6) (6) (6) (6) (6)

188-9812 188-9819 188-9818 152-7818 140-6816

5000 Series Shovels 5130B MASS EXCAVATION

5130B MASS EXCAVATION Bucket Description Bucket Arrangement Bucket & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Base Edge Assembly Adapter* Center Corner Lug Edge Protector RH LH Pin Retainer Assembly Sidebar Protector Pin Collar Cotter Pin Tips General Purpose Penetration Special Penetration Sharp Pin Retainer Assembly

High Density 157-4130 157-4131

Rock

Rock

General Purpose 142-3555 157-4198

11.0 (8.6) V880

13.7 (10.5) V880

13.7 (10.5) V880

13.0 (10.0) V810

Weld-On Adapters Crested Corner Adapter Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Adapter Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Adapter Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Top-Pin Tips

157-3960 157-3961

Spade-Plate 4.72 (120) 99 (2520) 104 (2640) 113 (2880) (1) 138-0873

Spade-Plate 4.72 (120) 99 (2520) 104 (2640) 113 (2880) (1) 138-0873

Spade-Plate 4.72 (120) 118 (3000) 130 (3290) 132 (3360) (1) 138-0874

Spade-Plate 4.72 (120) 118 (3000) 123 (3120) 132 (3360) (1) 157-4205

(3) 208-8884 (2) 208-8880 (4) 138-0887

(3) 208-8884 (2) 208-8880 (4) 138-0887

(3) 208-8884 (2) 208-8880 (4) 113-9680

(5) 188-9814 (5) 188-9814

(2) (2) (8) (8) (2) (2) (2) (2)

140-6885 140-6886 136-8788 140-6889 122-2681 188-4885 168-0887 2H-3775

(2) (2) (8) (8) (2) (2) (2) (2)

140-6885 140-6886 136-8788 140-6889 122-2681 188-4885 168-0887 2H-3775

(2) (2) (8) (8) (2) (2) (2) (2)

136-8785 136-8786 136-8788 140-6889 122-2681 188-4885 168-0887 2H-3775

(5) (5) (5) (5) (5) (5)

188-4882 188-4889 188-4888 168-0883 152-7888 140-6889

(5) (5) (5) (5) (5) (5)

188-4882 188-4889 188-4888 168-0883 152-7888 140-6889

(5) (5) (5) (5) (5) (5)

168-0882 168-0889 188-4888 168-0883 152-7888 140-6889

(5) (5) (5) (5) (5) (5)

188-9812 188-9819 188-9818 168-0883 152-7818 140-6816

Always use a new pin and retainer assembly when installing tips, edge protectors and sidebar protectors. Use 1U-7184 pin removal tool. * For welding adapters use Special Instructions (SEHS9810) for V780 in lieu of 5130B instructions being published.

4-5

5000 Series Shovels 5130B MASS EXCAVATION

5130B MASS EXCAVATION — Continued Bucket Description Bucket & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Base Edge Assembly Adapter* Center Corner Tips Penetration Short Long Heavy Duty Long HD Pin HD Retainer Assembly

Coal 108-2546 214-6270

Coal 133-1557

17.8 (13.7) J550

24.0 (18.5) J550

Weld-On Adapters Flushmount Side-Pin Tips

Weld-On Adapters Flushmount Side-Pin Tips

Straight-Plate 3.00 (76) 118 (3005) 123 (3125) 139 (3529) Balderson

Straight-Plate 3.00 (76) 125 (3183) 130 (3303) 148 (3766) Balderson

(7) 3G-9494 (2) 3G-9494

(7) 3G-9494 (2) 3G-9494

(9) (9) (9) (9) (9) (9)

(9) (9) (9) (9) (9) (9)

9W-8559 9W-8551 9W-8552 9N-4552 107-3378 107-8559

9W-8559 9W-8551 9W-8552 9N-4552 107-3378 107-8559

Always use a new pin and retainer when installing tips. The HD Pin and retainer system is used on this configuration. They should not be replaced with the standard pin and retainer. * See Special Instruction SEHS9810 for welding adapters.

4-6

5000 Series Shovels 5130 FRONT SHOVEL

5130 FRONT SHOVEL Bucket Description Bowl & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Edge Group** Base Edge Assembly** Adapter* Center Corner Lug Edge Protector Center RH LH Pin Retainer Assembly Sidebar Protector Pin-Flex Tips General Purpose Penetration Short Penetration Pin - Heavy Duty Flex Retaining Sleeve GP - Taper Lock Tip GP - Taper Lock Pin Assembly Adapter Nose Plate Wear ARM

High Density 142-3551

Rock 142-3581

High Abrasion 142-3586

11.0 (8.5) V780

13.7 (10.5) V780

13.7 (10.5) V780

Weld-On Adapters Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Spade-Plate 4.72 (120) 108 (2750) 115 (2910) 122 (3110) 135-9791 (1) 138-0820

(1) 138-0821

Spade-Plate 4.72 (120) 131 (3330) 137 (3490) 145 (3690) 142-3499 (1) 138-0821

(3) 188-9814 (2) 188-9810 (4) 107-3436

(4) 188-9814 (2) 188-9810 (5) 107-3436

(4) 188-9814 (2) 188-9810 (5) 107-3436

(2) (2) (8) (8) (2) (2) (5) (5) (5) (5) (5) (5) (5)

138-0785 138-0786 138-0788 140-6889 132-4765 113-9688

136-6782 195-7278 132-4781 132-4788 132-4789 136-6782 136-6783 132-4780 (8) 135-7690

Spade-Plate 4.72 (120) 131 (3330) 137 (3490) 145 (3690)

(1) (2) (2) (10) (10) (2) (2)

138-0787 138-0785 138-0786 138-0788 140-6889 132-4765 113-9688

(1) (2) (2) (10) (10) (2) (2)

(6) (6) (6) (6) (6) (6) (6)

104-3782 124-8789 132-4781 132-4788 132-4789 136-6782 136-6783 132-4780

(6) (6) (6) (6) (6) (6) (6)

138-0787 138-0785 138-0786 138-0788 140-6889 132-4765 113-9688

104-3782 124-8789 132-4781 132-4788 132-4789 136-6782 136-6783 132-4780 (10) 135-7690

Always use a new pin and retainer assembly when installing tips, edge protectors and sidebar protectors. Use 1U-7184 pin removal tool. * See Special Instruction SEHS9810 for welding adapters. ** Note V780 front shovel base edge assemblies and groups have been cancelled and replaced by the V810 system. See page 4-24 for replacement edge groups, and GET part numbers.

4-7

5000 Series Shovels 5130 FRONT SHOVEL

5130 FRONT SHOVEL — Continued Bucket Description Bowl & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Edge Group** Base Edge Assembly** Adapter* Center Corner Lug Edge Protector Center RH LH Pin Retainer Assembly Sidebar Protector Pin — Flex Tips General Purpose Penetration Short Short Penetration Pin — Heavy Duty Flex Retaining Sleeve GP — Taper Lock Tip Taper Lock Pin Assembly Adapter Nose Plate Wear ARM

General Purpose 157-3988

High Abrasion 142-5586

13.7 (10.5) V680

14.3 (11.0) V780

Weld-On Adapters Crested Corner Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Spade-Plate 4.72 (120) 131 (3330) 137 (3490) 144 (3650) (1) 157-3990

Spade-Plate 4.72 (120) 131 (3330) 137 (3490) 145 (3690) 142-3499 (1) 138-0821

(4) 188-9814 (2) 188-9810 (5) 113-9680

(4) 188-9814 (2) 188-9810 (5) 107-3436

(1) (2) (2) (10) (10) (2) (2)

136-8684 136-8785 136-8786 136-8788 140-6889 122-2687 113-9688

(6) 6I-8689 (6) 113-9689 (6) 119-9681 (6) 129-9688 (6) 129-9689 119-9680

(1) (2) (2) (10) (10) (2) (2)

138-0787 138-0785 138-0786 138-0788 140-6889 132-4765 113-9688

(6) 136-6782 (6) 195-7278 (6) (6) (6) (6) (6)

132-4781 132-4788 132-4789 136-6782 136-6783 132-4780 (10) 135-7690

Always use a new pin and retainer assembly when installing tips, edge protectors and sidebar protectors. Use 1U-7184 pin removal tool. * See Special Instruction SEHS9810 for welding adapters. ** Note V780 front shovel base edge assemblies and groups have been cancelled and replaced by the V810 system. See page 4-24 for replacement edge groups, and GET part numbers.

4-8

5000 Series Shovels 5130 MASS EXCAVATION

5130 MASS EXCAVATION Bucket Description Bucket Arrangement Bucket & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Base Edge Assembly** Adapter* Center Corner Lug Edge Protector Center RH LH Pin Retainer Assembly Sidebar Protector Pin — Flex Tips General Purpose Penetration Short Penetration Pin — Heavy Duty Flex Retaining Sleeve GP — Taper Lock Tip Taper Lock Pin Assembly Adapter Nose

High Density Special

High Density

Rock

Rock

142-3526

142-3536

129-5073 142-3521

142-3531

10.5 (8.0) V780

10.8 (8.3) V780

13.0 (10.0) V780

13.0 (10.0) V780

Weld-On Adapters Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Spade-Plate 4.72 (120) 78 (1970) 82 (2090) 92 (2330) (1) 133-0668

Spade-Plate 4.72 (120) 99 (2520) 104 (2640) 113 (2880) (1) 138-0873

Spade-Plate 4.72 (120) 99 (2520) 104 (2640) 113 (2880) (1) 138-0873

Spade-Plate 4.72 (120) 118 (3000) 123 (3120) 132 (3360) (1) 138-0874

(2) 208-8884 (2) 208-8880 (3) 107-3436

(3) 208-8884 (2) 208-8880 (4) 253-5342

(3) 208-8884 (2) 208-8880 (4) 107-3436

(3) 208-8884 (2) 208-8880 (4) 113-9680

(1) (1) (1) (6) (6) (2) (4)

138-0787 138-0785 138-0786 138-0788 140-6889 122-2681 122-2682

(2) (2) (8) (8) (2) (2)

138-0785 138-0786 138-0788 140-6889 122-2681 122-2682

(2) (2) (8) (8) (2) (2)

138-0785 138-0786 138-0788 140-6889 122-2681 122-2682

(2) (2) (8) (8) (2) (2)

136-8785 136-8786 136-8788 140-6889 122-2681 122-2682

(4) (4) (4) (4) (4) (4) (4)

104-3782 195-7278 132-4781 132-4788 132-4789 136-6782 136-6783 132-4780

(5) (5) (5) (5) (5) (5) (5)

104-3782 195-7278 132-4781 132-4788 132-4789 136-6782 136-6783 132-4780

(5) (5) (5) (5) (5) (5) (5)

104-3782 195-7278 132-4781 132-4788 132-4789 136-6782 136-6783 132-4780

(5) (5) (5) (5) (5) (5) (5)

104-3782 195-7278 132-4781 132-4788 132-4789 136-6782 136-6783 132-4780

Always use a new pin and retainer assembly when installing tips, edge protectors and sidebar protectors. Use 1U-7184 pin removal tool. * See Special Instruction SEHS9810 for welding adapters. ** Note V780 mass excavation base edge assemblies and groups have been cancelled and replaced by the V880 system. See page 4-24 for replacement edge groups, and GET part numbers.

4-9

5000 Series Shovels 5130 MASS EXCAVATION

5130 MASS EXCAVATION — Continued Bucket Description Bucket Arrangement Bucket & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Edge Group** Base Edge Assembly** Adapter* Center Corner Lug Edge Protector RH LH Pin Retainer Assembly Sidebar Protector Pin — Flex Tips General Purpose Penetration Short Short Penetration Pin — Heavy Duty Flex Retaining Sleeve GP — Taper Lock Tip Taper Lock Pin Assembly Adapter Nose

Rock

General Purpose

142-3521

126-2674

High Abrasion 142-3500 142-3501

13.7 (10.5) V780

13.0 (10.0) V680

13.7 (10.5) V780

Weld-On Adapters Crested Corner Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Top-Pin Tips

Weld-On Adapters Crested Corner Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Spade-Plate 4.72 (120) 99 (2520) 104 (2640) 113 (2880)

Spade-Plate 4.00 (102) 118 (3000) 125 (3160) 130 (3300)

Spade-Plate 4.72 (120) 99 (2520) 104 (2640) 113 (2880)

(1) 138-0873

(1) 123-9185

(1) 138-0873

(3) 208-8884 (2) 208-8880 (4) 253-5342

(4) 109-2684 (2) 122-2680

(3) 208-8884 (2) 208-8880 (4) 253-5342

(2) (2) (8) (8) (2) (2)

138-0785 138-0786 138-0788 140-6889 122-2681 122-2682

(5) 104-3782 (5) 124-8789 (5) (5) (5) (5) (5)

132-4781 132-4788 132-4789 136-6782 136-6783 132-4780

(2) (2) (8) (8) (2) (2) (6) 6I-8689 (6) 113-9689 (6) 119-9681 (6) 129-9688 (6) 129-9689 119-9680

138-0785 138-0786 138-0788 140-6889 122-2681 122-2682

(5) 104-3782 (5) 124-8789 (5) (5) (5) (5) (5)

132-4781 132-4788 132-4789 136-6782 136-6783 132-4780

Always use a new pin and retainer assembly when installing tips, edge protectors and sidebar protectors. Use 1U-7184 pin removal tool. * See Special Instruction SEHS9810 for welding adapters. ** Note V780 mass excavation base edge assemblies and groups have been cancelled and replaced by the V880 system. See page 4-24 for replacement edge groups, and GET part numbers.

4-10

5000 Series Shovels 5130 MASS EXCAVATION

5130 MASS EXCAVATION — Continued Bucket Description Bucket & Bearing Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Coal 214-6270

Coal 133-1557

17.8 (13.7) J550

24.0 (18.5) J550

Weld-On Adapters Flushmount Side-Pin Tips

Weld-On Adapters Flushmount Side-Pin Tips

Edge Type Edge Thickness — inch (mm)

Straight-Plate 3.00 (76)

Straight-Plate 3.00 (76)

Width — inch (mm)

118 (3005) 123 (3125) 139 (3529) Balderson

125 (3183) 130 (3303) 148 (3766) Balderson

Inside Sidebar Outside Sidebar Trench Base Edge Assembly Adapter* Center Corner Tips Penetration Short Long Heavy Duty Long HD Pin HD Retainer Assembly

(7) 3G-9494 (2) 3G-9494

(7) 3G-9494 (2) 3G-9494

(9) (9) (9) (9) (9) (9)

(9) (9) (9) (9) (9) (9)

9W-8559 9W-8551 9W-8552 9N-4552 107-3378 107-8559

9W-8559 9W-8551 9W-8552 9N-4552 107-3378 107-8559

Always use a new pin and retainer system when installing tips. The HD pin and retainer system is used on this configuration. They should not be replaced with the standard pin and retainer. * See Special Instruction SEHS9810 for welding adapters.

4-11

5000 Series Shovels 5110B MASS EXCAVATION

5110B MASS EXCAVATION Bucket Description Bucket Arrangement Bucket Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Base Edge Assembly Adapter Center Corner Lug Edge Protector Center RH LH Pin Retainer Assembly Sidebar Protector Pin Retainer Assembly Tips Wide Penetration Special Penetration General Purpose Pin Retainer Assembly Bottom Wear Plate

4-12

High Density 198-4720 198-4721

Rock 198-4710 198-4711

Coal

8.1 (6.2) V810

9.9 (7.6) V810

13.6 (10.4) J550

Weld-On Adapters Crested Corner Adapters Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Crested Corner Adapters Top-Pin Tips Pin-On Edge Protectors Pin-On Sidebar Protectors

Weld-On Adapters Flushmount Side-Pin Tips

176-5720

Spade 3.9 (100) 77.3 (1964) 81.3 (2064) 88.7 (2254) (1) 179-2044

Spade 3.9 (100) 90.3 (2294) 94.3 (2394) 101.6 (2580) (1) 157-4104

Straight 3.0 (76) 114.8 (2916) 118.7 (3016) 123.1 (3128) (1) 176-7067

(2) 171-1814 (2) 171-1810 (3) 149-5820

(3) 171-1814 (2) 171-1810 (4) 149-5820

(6) 3G-4554 (2) 3G-4554

(1) (1) (1) (6) (6) (2) (2) (2)

152-7837 152-7825 152-7826 136-8788 140-6889 128-5699 128-5708 113-4709

(2) (2) (8) (8) (2) (2) (2)

152-7815 152-7816 136-8788 140-6889 128-5699 128-5708 113-4709

(4) (4) (4) (4) (4)

188-9819 188-9818 188-9812 152-7818 140-6816

(5) (5) (5) (5) (5) (9)

188-9819 188-9818 188-9812 152-7818 140-6816 157-4102

(8) 107-3550

(8) 107-3378 (8) 107-8559

5000 Series Shovels 5110B MASS EXCAVATION

5110B MASS EXCAVATION — Continued Bucket Description Bucket Assembly Capacity Cubic Yard (Cubic Meter) GET Size Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Base Edge Assembly Adapter Tips Long Heavy Duty Long Short Penetration Penetration Long Life Center Sharp Corner Sharp Twin Sharp Long Sharp Tip Pin Retainer Assembly Bottom Wear Plate

Medium Duty 200-6140

Medium Duty 200-6130

Medium Duty 198-4730

Medium Duty 200-6120

8.8 (6.8) J600 Straight 3.1 (80) 77.3 (1964) 81.3 (2064) 87.0 (2210) 200-6129 (5) 113-9604

9.6 (7.4) J600 Straight 3.1 (80) 77.3 (1964) 81.3 (2064) 87.0 (2210) 200-6129 (5) 113-9604

10.4 (8.0) J600 Straight 3.1 (80) 90.3 (2294) 94.3 (2394) 100.0 (2540) 198-4724 (6) 113-9604

11.2 (8.6) J600 Straight 3.1 (80) 90.3 (2294) 94.3 (2394) 100.0 (2540) 198-4724 (6) 113-9604

(5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5)

(5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5)

(6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (9)

(6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (9)

6I-6602 7Y-0602 6I-6601 7I-7609 119-9609 107-8609 107-8608 135-9608 159-0600 113-9608 113-9609

6I-6602 7Y-0602 6I-6601 7I-7609 119-9609 107-8609 107-8608 135-9608 159-0600 113-9608 113-9609

6I-6602 7Y-0602 6I-6601 7I-7609 119-9609 107-8609 107-8608 135-9608 159-0600 113-9608 113-9609 157-4102

6I-6602 7Y-0602 6I-6601 7I-7609 119-9609 107-8609 107-8608 135-9608 159-0600 113-9608 113-9609 157-4102

4-13

5000 Series Shovels 5080 FRONT SHOVEL

5080 FRONT SHOVEL Bucket Description Bowl & Bearing Assembly Bowl Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Base Edge Assembly Adapter Center Corner RH LH Sidebar Protector Pin Retainer Tips Penetration Short Abrasion Heavy Duty Abrasion Long Heavy Duty Long Heavy Duty Long Life Heavy Duty Pin Heavy Duty Retainer Assembly

4-14

General Purpose 4E-9671 4E-9672

General Purpose 110-4204

General Purpose 4E-9648 4E-9649

General Purpose 130-8535 130-8536

6.5 (5.0) J600

7.0 (5.3) J600

5.5 (4.2) J700

5.2 (4.0) J600

Weld-On Adapters Side-Pin Tips Pin-On Sidebar Protectors

Weld-On Adapters Side-Pin Tips

Weld-On Adapters Side-Pin Tips Pin-On Sidebar Protectors

Weld-On Adapters Side-Pin Tips Pin-On Sidebar Protectors

Spade-Plate 2.75 (70) 88 (2225) 92 (2325) 97 (2465) (1) 4E-9361

Spade-Plate 2.75 (70) 92 (2335) 97 (2455) 102 (2585) (1) 110-4188

Spade-Plate 3.00 (76.2) 88 (2225) 92 (2325) 97 (2465) (1) 101-7604

Straight-Plate 2.75 (70) 72 (1835) 77 (1955) 82 (2085) (1) 130-8537 (2) 6I-6604 (1) 6I-6606/5

(3) (3) (2) (4) (4)

6I-8605 6I-8606 1U-0740 133-0738 107-8559

(3) 6I-8605 (3) 6I-8606

(3) (3) (2) (4) (4)

4T-4705 4T-4706 1U-0740 133-0738 107-8559

(2) 125-0800 (4) 8E-4708 (4) 4T-4707

(6) 7I-7609 (6) 6I-6601

(6) 7I-7609 (6) 6I-6601

(6) 4T-4709

(4) 7I-7609 (4) 6I-6601

(6) (6) (6) (6) (6) (6)

(6) (6) (6) (6) (6) (6)

(6) (6) (6) (6) (6) (6) (6)

(4) (4) (4) (4) (4) (4)

6I-6603 6I-6602 7Y-0602 107-8602 113-9608 113-9609

6I-6603 6I-6602 7Y-0602 107-8602 113-9608 113-9609

4T-4703 9U-9703 4T-4702 9U-9702 107-2001 113-4708 113-4709

6I-6603 6I-6602 7Y-0602 107-8602 113-9608 113-9609

5000 Series Shovels 5080 FRONT SHOVEL

5080 FRONT SHOVEL — Continued Bucket Description Bowl & Bearing Assembly Bowl Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Base Edge Assembly Adapter Center RH LH Edge Protector RH LH Sidebar Protector Pin Retainer Tips Penetration Abrasion Heavy Duty Abrasion Long Heavy Duty Long Heavy Duty Long Life Heavy Duty Pin Heavy Duty Retainer Assembly

Rock 157-9925 157-9926

Rock 156-8438 156-8439

Rock 144-2728 144-2729

Rock 147-1536 147-1537

6.0 (4.6) J700

6.8 (5.2) J700

7.8 (6.0) J700

6.8 (5.2) J700

Weld-On Adapters Side-Pin Tips

Weld-On Adapters Side-Pin Tips Pin-On Sidebar Protectors

Weld-On Adapters Side-Pin Tips

Weld-On Adapters Side-Pin Tips Pin-On Sidebar Protectors Bolt-On Edge Protectors

Spade-Plate 3.15 (80) 92 (2335) 97 (2455) 104 (2630) (1) 146-5511

Spade-Plate 3.15 (80) 92 (2335) 97 (2455) 104 (2630) (1) 146-5511

Spade-Plate 3.15 (80) 92 (2335) 97 (2455) 104 (2630) (1) 146-5511

Spade-Plate 3.15 (80) 92 (2335) 97 (2455) 104 (2630) (1) 146-5509

(3) 4T-4705 (3) 4T-4706

(3) 4T-4705 (3) 4T-4706

(3) 132-4705 (3) 132-4706

(1) 4T-4704 (2) 4T-4705 (2) 4T-4706

(2) 125-0800 (4) 8E-4708 (4) 4T-4707 (6) (6) (6) (6) (6) (6) (6) (6)

4T-4709 4T-4703 9U-9703 4T-4702 9U-9702 107-2001 113-4708 113-4709

(6) (6) (6) (6) (6) (6) (6) (6)

4T-4709 4T-4703 9U-9703 4T-4702 9U-9702 107-2001 113-4708 113-4709

(6) (6) (6) (6) (6) (6) (6) (6)

4T-4709 4T-4703 9U-9703 4T-4702 9U-9702 107-2001 113-4708 113-4709

(2) (2) (2) (4) (4)

109-9081 109-9082 125-0800 8E-4708 4T-4707

(5) (5) (5) (5) (5) (5) (5) (5)

4T-4709 4T-4703 9U-9703 4T-4702 9U-9702 107-2001 113-4708 113-4709

4-15

5000 Series Shovels 5080 FRONT SHOVEL

5080 FRONT SHOVEL — Continued Bucket Description Bucket & Bearing Assembly Bowl & Bearing Assembly Bowl Assembly Capacity Cubic Yard (Cubic Meter) Type of GET

Edge Type Edge Thickness — inch (mm) Width — inch Inside Sidebar (mm) Outside Sidebar Trench Base Edge Assembly Adapter Center RH LH Edge Protector RH LH Sidebar Protector Pin Retainer Tips Penetration Abrasion Heavy Duty Abrasion Long Heavy Duty Long Heavy Duty Long Life Heavy Duty Pin Heavy Duty Retainer Assembly

4-16

Rock

Rock

Front Dump 168-3153

Rock

158-7455 158-7456

156-8438 156-8439

168-3154

158-9945 158-9947

5.5 (4.2) J700

6.8 (5.2) J700

7.8 (6.0) J700

5.5 (4.2) J700

Weld-On Adapters Side-Pin Tips Pin-On Sidebar Protectors Bolt-On Edge Protectors

Weld-On Adapters Side-Pin Tips Pin-On Sidebar Protectors

Weld-On Adapters Side-Pin Tips Pin-On Sidebar Protectors Bolt-On Edge Protectors

Weld-On Adapters Side-Pin Tips Pin-On Sidebar Protectors

Spade-Plate 3.15 (80) 72 (1835) 77 (1955) 84 (2135) (1) 156-5452

Spade-Plate 3.15 (80) 92 (2335) 97 (2455) 104 (2630) (1) 146-5511

Spade-Plate 3.15 (80) 92 (2335) 97 (2455) 104 (2630) (1) 146-5509

Spade-Plate 3.15 (80) 72 (1835) 77 (1955) 84 (2135) (1) 159-0014

(2) (2) (1) (1) (1) (2) (4) (4)

4T-4705 4T-4706 109-9080 109-9081 109-9082 125-0800 8E-4708 4T-4707

(3) 132-4705 (3) 132-4706

(1) 4T-4704 (2) 4T-4705 (2) 4T-4706

(2) 4T-4705 (2) 4T-4706

(2) 125-0800 (4) 8E-4708 (4) 4T-4707

(2) (2) (2) (4) (4)

109-9081 109-9082 125-0800 8E-4708 4T-4707

(2) 125-0800 (4) 8E-4708 (4) 4T-4707

(4) (4) (4) (4) (4) (4) (4) (4)

4T-4709 4T-4703 9U-9703 4T-4702 9U-9702 107-2001 113-4708 113-4709

(6) (6) (6) (6) (6) (6) (6) (6)

(5) (5) (5) (5) (5) (5) (5) (5)

4T-4709 4T-4703 9U-9703 4T-4702 9U-9702 107-2001 113-4708 113-4709

(4) (4) (4) (4) (4) (4) (4) (4)

4T-4709 4T-4703 9U-9703 4T-4702 9U-9702 107-2001 113-4708 113-4709

4T-4709 4T-4703 9U-9703 4T-4702 9U-9702 107-2001 113-4708 113-4709

5000 Series Shovels 5230 FRONT SHOVEL ABRASION PACKAGES

5230 FRONT SHOVEL Bucket Description Bucket Arrangement Edge Group Edge Assembly Edge Wear Group* (Plate Group Wear) Block (Ends of Base Edge) Block (Ends of Base Edge) Plate Plate Wear Plate Wear Plate Wear Plate Wear ARM Bowl Wear Group* (Plate Group Wear) Plate Wear (RH) Plate Wear (LH) Plate Plate Plate Plate Plate Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear ARM Dozer Wear Group* (Plate Group Wear) Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Plate Plate Plate Plate

High Density

(4) (4) (4) (4)

136-1105 128-6047 136-1108 132-1477 132-1478 133-0653 136-1704

(16) 129-9688 128-6039 (1) 128-6042 (1) 138-6185 (2) 110-3143 (2) 128-6040 (2) 128-6041 (1) 128-6044 (2) 135-8774 (18) 128-6043 (4) 128-6045 (2) 131-0506 (16) 131-0508 (2) 132-2858

High Density 138-5943 128-6047 138-5983 (4) 132-1477 (4) 132-1478

High Density 140-8354 138-5943 128-6047 138-5983 (4) 132-1477 (4) 132-1478

(4) 138-6004 (4) 138-6006 (8) 139-6804

(4) 138-6004 (4) 138-6006 (8) 139-6804

138-5940 (1) 128-6042 (1) 138-6185 (1) 128-6044

(1) (2) (2) (2) (2) (16) (2) (2) (2) (2) (3) (18) (16) (2)

128-6043 128-6045 139-5273 139-5274 139-5275 139-5276 139-5277 139-5278 139-5279 139-5280 139-5281 139-6802 139-6803 141-2025

(2) (12) (1) (2) (1) (2) (2) (14) (6) (2)

139-6799 112-1014 128-6061 139-5281 139-5282 139-6800 139-6801 112-1013 112-1015 112-1031 112-1044

(18) 131-0507 (2) 112-1014 (12) 128-6061

(2) (14) (6) (2) (3)

112-1013 112-1015 112-1031 112-1044 128-6062

* Groups serviced at the part number level only. Note: Refer to page 3-98 for straight base edges without holes and page 2-35 for Dozer wear bars. Refer to wear protection section for Mechanically Attached Wear Plate Options.

4-17

5000 Series Shovels 5230 FRONT SHOVEL ABRASION PACKAGES

5230 FRONT SHOVEL — Continued Bucket Description Bucket Arrangement Edge Group Edge Assembly Edge Wear Group* (Plate Group Wear) Block (Ends of Base Edge) Block (Ends of Base Edge) Plate Plate Plate Plate Wear ARM Bowl Wear Group* (Plate Group Wear) Plate Wear (RH) Plate Wear (LH) Plate Plate Plate Plate Plate Plate Plate Plate Wear Plate Wear Plate Wear Plate Wear ARM Dozer Wear Group* (Plate Group Wear) Plate Wear Plate Plate Plate Plate Plate Plate

Rock

(1) (1) (2) (10) (2) (1) (14)

132-2856 132-2855 112-1011 118-0619 119-3525 119-3527 121-9691

(2) (2) (2) (16)

140-8702 132-2858 131-0506 131-0507

(2) (12) (2) (18) (6) (2) (3)

112-1014 112-1011 112-1013 112-1015 112-1031 112-1044 118-0230

125-1099

(1) (1) (2) (1) (14) (2) (2) (4) (2)

(2) (12) (2) (18) (6) (2) (3)

132-2856 132-2855 119-3525 119-3527 121-9691 122-3789 126-4942 122-2789 126-4942

112-1014 112-1011 112-1013 112-1015 112-1031 112-1044 118-0230

* Groups serviced at the part number level only. NOTE: Refer to page 3-98 for straight base edges without holes and page 2-35 for Dozer wear bars. Refer to wear protection section for Mechanically Attached Wear Plate Options.

4-18

(4) (4) (2) (4) (4) (20)

High Abrasion 142-3614 132-1476 125-1099 132-1490 132-1477 132-1478 133-0651 133-0652 133-0653 135-7690

5000 Series Shovels 5230 MASS EXCAVATION ABRASION PACKAGES

5230 MASS EXCAVATION Bucket Description Bucket Arrangement Edge Assembly Bucket Wear Group* (Plate Group Wear) Plate Plate Plate Plate Plate

High Density 137-4439 137-4451 (4) 119-2885 (13) 119-2889 (26) 137-4467

(2) (2) (20) (10) (6)

Rock

Low Density

125-1104 117-9889 119-2884 119-2885 119-2888 119-2889 157-4159

125-1104 122-4431 119-2888 119-2889 122-4432 122-4433

(30) (15) (2) (2)

* Groups serviced at the part number level only. NOTE: Refer to page 3-98 for straight base edges without holes and page 2-35 for Dozer wear bars. Refer to wear protection section for Mechanically Attached Wear Plate Options.

4-19

5000 Series Shovels 5130B FRONT SHOVEL ABRASION PACKAGES

5130B FRONT SHOVEL Bucket Description Bucket Arrangement Edge Group Edge Assembly Edge Wear Group* (Plate Group Wear) Block Wear (Ends of Base Edge) Plate Wear Plate Wear Plate Wear Plate Wear ARM Bowl Wear Group* (Plate Group Wear) Plate Wear (RH) Plate Wear (LH) Plate Plate Plate Plate Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear ARM Dozer Wear Group* (Plate Group Wear) Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Plate Plate Plate Plate Plate Plate

High Density 142-3550 135-9791 138-0820 136-6377 (8) 131-0505 (4) 138-8625 (4) 138-8626

High Abrasion

138-0821 (8) (4) (4) (2) (10)

138-0821 131-0499 131-0505 131-0500 131-0501 131-0502 135-7690

(2) 131-0492 (10) 131-0508

(1) (1) (2) (2) (6) (1) (2) (2) (10) (2) (6) (2) (14)

140-7287 140-7287 110-3127 110-3128 110-3143 110-3146 131-0492 131-0506 131-0508 131-5633 131-5634 140-7296 131-0507

(2) (4) (3) (2) (1) (2) (15) (2) (2) (10) (2) (4) (2)

(2) (4) (3) (2) (1) (2) (15) (2) (2) (10) (2) (4) (2)

103-5601 110-3153 118-0232 142-3508 142-3509 142-3512 103-5600 103-5603 110-3120 110-3121 142-3507 142-3510 142-3511

(8) 135-7690 (1) (1) (2) (2) (1) (12) (2) (4) (10) (2)

140-7287 140-7287 110-3127 110-3128 110-3146 119-2889 131-5633 136-6342 136-6352 140-7296

(14) 131-0507 136-6358 (4) 110-3153

(11) (2) (2) (10) (3)

103-5600 103-5603 110-3120 136-6349 136-6350

* Groups serviced at the part number level only. Note: Refer to page 3-98 for straight base edges without holes and page 2-35 for Dozer wear bars. Refer to wear protection section for Mechanically Attached Wear Plate Options.

4-20

Rock

(1) (1) (2) (2) (1)

140-7287 140-7287 110-3127 110-3128 110-3146

103-5601 110-3153 118-0232 142-3508 142-3509 142-3512 103-5600 103-5603 110-3120 110-3121 142-3507 142-3510 142-3511

5000 Series Shovels 5130B MASS EXCAVATION ABRASION PACKAGES

5130B MASS EXCAVATION Bucket Description Bucket Arrangement Edge Assembly Bucket Wear Group* (Plate Group Wear) Plate Plate Plate Plate Plate Plate

High Density 138-0873 (10) (20) (4) (2) (2)

112-6916 119-1266 119-1267 120-7595 120-7596

(10) (20) (8) (4) (2) (2)

Rock 157-3960 138-0873 118-8681 112-6916 119-1266 119-1267 119-1268 119-1269 119-1270

Rock 138-0874 (2) (2) (11) (22)

112-6914 112-6915 112-6916 112-6917

* Groups serviced at the part number level only. Note: Refer to page 3-98 for straight base edges without holes and page 2-35 for Dozer wear bars. Refer to wear protection section for Mechanically Attached Wear Plate Options.

4-21

5000 Series Shovels 5130 FRONT SHOVEL ABRASION PACKAGES

5130 FRONT SHOVEL Bucket Description Bucket Arrangement Edge Group Edge Assembly Edge Wear Group* (Plate Group Wear) Block Wear (Ends of Base Edge) Plate Wear Plate Wear Plate Wear Plate Wear ARM Bowl Wear Group* (Plate Group Wear) Plate Wear (RH) Block Plate Wear (LH) Plate Plate Plate Plate Plate Plate Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear ARM Dozer Wear Group* (Plate Group Wear) Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Wear Plate Plate Plate Plate Plate Plate Plate

High Density

Rock

138-0820 138-0821 136-6377 (8) 131-0505 (4) 138-8625 (4) 138-8626

(8) (4) (4) (2) (10)

(8) 135-7690

High Abrasion 140-7283 142-3499 138-0821 131-0499 131-0505 131-0500 131-0501 131-0502 135-7690 140-7287

(8) 131-0505 (2) (2) (1) (12) (1) (2) (10) (10) (2) (4)

110-3127 110-3128 110-3146 119-2889 131-0503 131-0506 136-6352 131-0509 131-5633 136-6342

(16) 131-0507 136-6358 (2) 103-5601 (4) 110-3153

(11) (2) (10) (3)

103-5600 110-3120 136-6349 136-6350

(2) (2) (1) (2) (1)

(1) 140-7287 (2) 110-3127 (2) 110-3128 110-3143 110-3146

110-3127 110-3128 110-3146 131-0492 131-0503

(10) 131-0508 (1) 131-0509

(4) 131-0500 (4) 131-0501 (2) 131-0502

(10) 129-9668 (2) (4) (3) (2) (1) (2) (15) (2) (2) (10) (2) (4) (2)

* Groups serviced at the part number level only. Note: Refer to page 3-98 for straight base edges without holes and page 2-35 for Dozer wear bars. Refer to wear protection section for Mechanically Attached Wear Plate Options.

4-22

High Abrasion 137-0302 142-3499 138-0821 131-0499 131-0505 (8) 131-0500 (4) 131-0501 (4) 131-0502 (2) 135-7690 (10) 131-0494 (1)

103-5601 110-3153 118-0232 142-3508 142-3509 142-3512 103-5600 103-5603 110-3120 110-3121 142-3507 142-3510 142-3511

(2) (2) (6) (4) (2) (10) (14)

140-7296 131-5633 131-5634 131-0492 131-0506 131-0508 131-0507

(2) (4) (3) (2) (1) (2) (15) (2) (2) (10) (2) (4) (2)

103-5601 110-3153 118-0232 142-3508 142-3509 142-3512 103-5600 103-5603 110-3120 110-3121 142-3507 142-3510 142-3511

5000 Series Shovels 5130 MASS EXCAVATION ABRASION PACKAGES

5130 MASS EXCAVATION Bucket Description Bucket Arrangement Edge Assembly Bucket Wear Group* (Plate Group Wear) Plate Plate Plate Plate Plate Plate

(10) (4) (2) (2)

High Density Special

High Density

133-0668

138-0873

112-6916 119-1268 119-1269 119-1270

(8) (20) (4) (2) (2)

112-6916 119-1266 119-1267 120-7595 120-7596

Rock

(10) (20) (8) (4) (2) (2)

129-5073 138-0873 118-8681 112-6916 119-1266 119-1267 119-1268 119-1269 119-1270

(14) (28) (3) (4) (1) (2) (20)

Abrasion 142-3500 138-0873 142-3503 112-6916 119-1266 119-1269 119-1270 142-3504 142-3505 135-7690

5130 MASS EXCAVATION — Continued Bucket Description Bucket Arrangement Edge Assembly Edge Wear Group* (Plate Group Wear) Plate Plate Plate Plate Plate Wear Plate Wear Plate Wear ARM Bucket Wear Group* (Plate Group Wear) Plate Plate Plate Plate Plate Plate

Rock 139-1154 138-0874

(2) (2) (11) (22)

112-6914 112-6915 112-6916 112-6917

Rock 138-0873

(10) (20) (8) (4) (2) (2)

118-8681 112-6916 119-1266 119-1267 119-1268 119-1269 119-1270

* Groups serviced at the part number level only. Note: Refer to page 3-98 for straight base edges without holes and page 2-35 for Dozer wear bars. Refer to wear protection section for Mechanically Attached Wear Plate Options.

4-23

5000 Series Shovels REPLACEMENT BASE EDGES

4-24

Former Base Edge Assemblies

Replaced By

136-6346 128-1151 126-9470 126-9471

138-0820 138-0821 138-0873 138-0874

5000 Series Shovels

Caterpillar Bucket Offerings Configurations are available in both ME & FS arrangements

High Density • 1.9-2.5 t/lcm (3200-4200 lbs/lcy) • Dense shot rock, heavy ore • High impact & abrasion

Rock • 1.3-1.9 t/lcm (2200-3200 lbs/lcy) • Shot rock, ore, consolidated overburden

High Abrasion • 1.3-1.9 t/lcm (2200-3200 lbs/lcy) • Rock bucket with increased protection • Highly abrasive shot rock, ore, consolidated overburden

4-25

5000 Series Shovels

Caterpillar Bucket Offerings — Continued Low Density • 1.2-1.5 t/lcm (2000-2500 lbs/lcy) • Rock bucket configuration with increased capacity for low density material

Coal • 0.8-1.3 t/lcm (1350-2200 lbs/lcy) • Coal, light rehandling

Custom • In the event one of the available buckets does not meet material, site, or system requirements, Caterpillar can provide custom buckets. • Customizing can be done to fit volume, penetration, or wear characteristic needs.

4-26

5000 Series Shovels MINING SHOVELS

MINING SHOVELS The Caterpillar Mining Edge Guard System (MEGS) of pin-on GET is a vital link in the performance of the 5000 series mining shovels; the 5230, 5130B and the 5130. Cat MEGS pin-on GET aids penetration for high work output and fully protects the sides and edges of buckets, even between the bucket tips. MEGS independently attached pin-on components can be quickly removed or replaced in the pit within minutes. MEGS cuts maintenance downtime, saves money, and improves total machine production to help customers achieve the optimal cost per ton (CPT). MEGS comes in two configurations, front shovel (FS) and Mass Excavation (ME) and there are three main tip systems utilized depending on the size of the machine. The V1000 tip family uses both a two-piece tip system which consists of a tip and coupler and a unique one piece penetration tip system. The penetration tip is unique in this size class and provides substantial advantages over the traditional two-piece systems used on competitive machines. The new V880 and V810 families use a conventional one-piece tip and adapter system with the tip held in place by a solid pin and snap ring retainer. The older V780 and V680 tip families, which are being replaced with the V880 or V810, use the one-piece tip and adapter system with the tip held in place by a heavy-duty flex pin. MEGS uses tips from the V-family, which are top-pinned. This is due to the market preference for this style of retention on these large GET components. All MEGS tips are made from DH-3 material to resist softening in high heat applications. All other components are made from DH-2 material. Edge assemblies, adapters, tips, couplers, edge protectors, and sidebar protectors are covered against breakage throughout their useful life by the Caterpillar Ground Engaging Tool Warranty. MEGS (V1000) Family

V1000 Assembly The edge assembly consists of a base edge weld-on adapters and weld-on lugs.

One-Piece Tip The one-piece penetration tip is the recommended tip option for the V1000 family. It provides superior performance in terms of cost per hour, productivity, penetration, simplicity and ease of maintenance. With the one-piece penetration tip, the coupler is not required and it’s important the correct pin and retainer are used.

4-27

5000 Series Shovels MINING SHOVELS

Two-Piece Tip System The Coupler is the component between the adapter and tip, it can be used with multiple sets of tips. For high abrasion low impact applications, an ARM coupler is also available.

Coupler Retention has been upgraded to a new style with a bottom installed pin. This new style allows the retention to last the length of the coupler life without any maintenance in all applications. It consists of a sleeve, a new retainer and a bottom installed tapered pin. The sleeve is located in the top counterbore of the coupler to prevent the pin from loading the retainer. The retainer assembly, which sits in the bottom counterbore, is a one-way only design to permit the pin to lock in to the snap ring before it engages the sleeve. The pin is tapered and can be quickly and easily installed from the bottom and driven out from the top at replacement time. Tips in the two-piece system are top-pinned to the coupler with the pin held in place by a snap ring style retainer assembly. There are two DH-3 tips to choose from; general purpose and general purpose with ARM. Refer to the cross-reference chart in the “Tips” section for details. Edge and sidebar protectors are independently attached for quick and easy installation and removal. The edge protectors are held on by a solid pin and snap ring retainer assembly. Sidebar protectors can be rotated for extended life and are independently attached using a flex pin. MEGS One-Piece Tip System (V880 and V810 Families)

V880 Assembly The edge assembly consists of a base edge with weld-on adapters. The top-pinned tips are easy to install and remove for fast on-site replacement and the tip/adapter juncture is patented to prevent the installation of competitive tips. There are two main DH-3 tips to choose from in the V880 and V810 families; the general purpose tip and the penetration tip. A sharp tip is also available for the V880 system. Refer to the chart in the “Tips” section for details. The tips are held in place with a solid pin and snap ring retainer assembly. The snap ring retainer assembly is placed in a counterbore in the bottom of the tip. The tip is installed over the adapter and retainer, and the pin is easily installed and removed from the top. Edge protectors are independently attached for quick and easy installation and removal using a solid pin and snap ring retainer assembly. Sidebar protectors can be rotated for extended life and are independently attached using a flex pin.

4-28

5000 Series Shovels MINING SHOVELS

MEGS One-Piece Tip System (V780, V680 Families)

V780 and V680 Assembly The earlier V780 and V680 families are being replaced in most cases by either the V880 or V810 systems. Where they continue to exist, the edge assembly consists of a base edge and weld-on adapters. The top-pinned tips are easy to install and remove for fast on-site replacement and the tip/adapter juncture is patented so competitive tips cannot be installed. There are four DH-3 tips to choose from the V780 and V680 families; general purpose, penetration, short penetration, and short. Two styles of retention are available for the V780 system. The HD flex pin and sleeve system and a more robust pin assembly with a threaded head to hold the tip and assembly in place. The Taper Lock system can only be used with tips that have a larger diameter pin hole to accept the assembly. Currently only the GP is available. Edge protectors are independently attached for easy installation and removal. These are held on by a solid pin and snap ring retainer assembly. The sidebars can be rotated for extended life and are independently attached using a flex pin. Tip and Coupler Retention: Two styles of tip retention systems are used on the 5000 series shovels. The current systems use a solid pin and retainer assembly and the earlier styles use the heavy-duty flex pin. Tip Pin and Retainer Assembly for the V1000 consists of a grooved pin, snap ring retainer assembly. All tips use the same retainer; however, a longer pin is required for the penetration tip. The spring assembly, previously used to hold the system tight, is no longer required. Coupler Retention consists of the top located sleeve, bottom located one-way snap ring retainer and assembly and a bottom-installed tapered pin.

Tip Pin and Retainer Assembly for the V880 and V810 are similar to the V1000 using a grooved pin and snap ring. The retainer assembly is located in the bottom counterbore of the tip.

4-29

5000 Series Shovels MINING SHOVELS

Heavy Duty Flex-Pin is available for both the V780 and V680 families. The system consists of a flex-pin and a retaining sleeve to distribute the load over a greater area.

Taper Lock Pin for the V780 Taper Lock system. The system consists of a two-piece pin that screws together and can only be used with tips with a large diameter round pin hole. Currently only a GP tip is available.

Adapters: When possible, the corner adapter comes with a crest. The addition of the crest enables the weld to be moved out of the corner to reduce the potential for a stress riser in the corner weld. The crest also consists of two lugs on either side. These are used to engage the sidebar and eliminate the need for the bottom pin. Edge Covers & Sidebar Protectors: Shovels can be run with or without edge and sidebar protectors although it is not recommended. In light or low abrasive materials, MEGS provide the flexibility to operate the machine without installing these components. This enables the system to be customized to deliver top production at the lowest possible cost per ton. Edge and sidebar protectors are independently attached for easy installation and removal. Edge Protectors protect the base edge between the adapters from wear in moderate to high wear rate material applications and aid in penetrating densely compacted material. These are held in place by a solid grooved pin and a snap ring retainer assembly.

Sidebar Protectors protect bucket corners and sides from wear in moderate to high wear rate material applications and aid in penetrating densely compacted material. These are held in place using flex-pins. When used in conjunction with a crested corner adapter, the lugs on either side of the crest hold the bottom of the sidebar protector in place and only one pin is required in the top hole. When a crested corner is not available, both the top and bottom pins are required. Sidebar protectors are reversible to maximize the use of available wear material and minimize CPH. When replacing base edges and corner adapters, it is important that they are positioned correctly, otherwise the top pin hole will be out of alignment.

4-30

5000 Series Shovels MINING SHOVELS

TIP SELECTION GUIDE Top-pin tips are easy to install and remove for fast on-site replacement. The adapter/tip juncture is patented so competitive tips cannot be installed on these adapters. V1000 Tip Options Penetration: a self-sharpening tip for densely compacted materials. Highly recommended for most applications. A penetration tip allows this system to provide better penetration. In most instances, this will help lower cost per hour. General Purpose: recommended for abrasive conditions where penetration is not a concern. General Purpose with A.R.M.: recommended for highly abrasive conditions. A.R.M. doubles the wear life of the General Purpose tip. All tips are made from DH-3 steel for maximum wear life and resistance to softening in high-heat applications.

V880/V810 Tip Options Penetration: a self-sharpening tip for densely compacted materials. Highly recommended for most applications. A penetration tip allows this system to provide better penetration. In most instances, this will help lower cost per hour. General Purpose: recommended for abrasive conditions where penetration is not a concern. Provides more wear material than the penetration tip. Sharp: recommended for very tightly compacted materials where blasting is limited. Wear life is significantly reduced to provide the sharp profile for penetration. Only available for the V880. All tips are made from DH-3 steel for maximum wear life and resistance to softening in high-heat applications.

4-31

5000 Series Shovels MINING SHOVELS

As shown, not all tip styles are available for each model. The following cross-reference chart helps quickly identify the tip style available for each model and by machine configuration. MEGS Tips Options

*

Model Configuration

5230 FS, ME

5130B, 5130 FS

5130B, 5130 ME

5130 FS, ME

5130 FS, ME

Tip Family

V1000

V810

V880

V780

V680

Tips Short General Purpose* General Purpose (ARM)* Penetration Short Penetration Sharp

132-1102 109-3103 143-3109

171-1812

168-0882

104-3782

119-9681 6I-8689

171-1819

168-0889

124-8789 132-4781

113-9689

152-7883

Used with coupler, 132-1100, or coupler (ARM), 109-3101.

Bucket Abrasion Packages: When customers purchase 5000-Series shovels, abrasion packages can be ordered factory installed to help extend the life of the bucket in tough, abrasive conditions. Wear packages extend bucket life by maintaining its structural integrity. Properly installed “sacrificial” iron will protect the bucket sides, bottom, and cutting edge from deterioration. Wear Plates Hardened, medium carbon steel plates are the primary form of abrasion resistance on Cat 5130, 5130B and 5230 buckets. Wear plates are strategically placed in the high-wear areas to protect the bucket without adding excess weight and metal where it is not needed.

Cat Abrasion Resistant Material (ARM) Cat ARM provides a higher level of protection in very abrasive conditions. ARM is a mixture of extremely hard tungsten carbide particles and weld material that is bonded to wear plates. In high-abrasion/low- to moderate-impact applications, the addition of ARM can extend the life of the wear part by 3-5 times. Cat ARM has been researched, tested and proven to be more durable and efficient than competitive offerings. However, using ARM in high-impact applications can result in some of the ARM chipping off. In extreme high-impact conditions, ARM may not be the most cost effective option.

4-32

5000 Series Shovels MINING SHOVELS

Standard Abrasion Package The standard abrasion package is included with all Rock and High Density Buckets. Includes: 1) Wear plates on the outside of the bowl assembly. 2) Wear plates on the bottom of the bowl assembly. ARM Abrasion Package Use in high-abrasion/low- to medium-impact applications. Includes the Standard Abrasion Package (1, 2): 3) Wear ribs on the sides of the cutting edge. 4) Wear plates on inner bowl sides, floor, and top/bottom of the cutting edge. 5) Wear plates with ARM. Custom Abrasion Packages Certain areas of the bucket are subject to higher impact than others. If the application is both high-impact and abrasive, wear plates can be thickened for longer life instead of the addition of ARM. Replacement custom wear plates may be available as made as ordered (MAO) items only. Mechanically Attached Wear Plate System (MAWPS) The Mechanically Attached Wear Plate System is an alternative to traditional weld-on plates. The hammerless retention system allows for quick replacement times in the field. MAWPS can be installed on virtually any flat surface and moderately curved surfaces. They work well on bucket bottoms and sides, as well as ski runners and sides. See the new Wear Protection section on page 1-4 for more details.

4-33

5000 Series Shovels MINING SHOVELS

Bucket & GET Selection Guidelines: Once bucket size has been determined, the final step is to choose the appropriate GET and wear package. The following matrices use the characteristics of impact and wear resistance to help determine the right bucket protection and GET combination for the application.

5230 Bucket & GET Selection Guidelines High

Impact Medium

Low

Penetration Tips Standard Wear Pkg

Penetration/GP/ GP ARM Tips* ARM Wear Package

Penetration/ GP ARM Tips* ARM Wear Package

Penetration Tips Standard Wear Pkg

Penetration/GP Tips* Standard Wear Package

Penetration/GP Tips* Standard Wear Pkg

Penetration Tips Standard Wear Pkg

Penetration/GP Tips* Standard Wear Package

Penetration/GP Tips

PENETRATION

DURABILITY

Low

Wear Plate Medium

High

DURABILITY

PENETRATION *The 5230 one-piece penetration tip is recommended for all applications, as it provides the best penetration, tip life, and cost per hour. When there is a preference for a two-piece system, use the General Purpose in high impact and the GP A.R.M. in low-impact/high-abrasion applications.

5130 & 5130B Bucket & GET Selection Guidelines High

Impact Medium

Low

Low

Penetration Tips Standard Wear Pkg

Penetration Tips* ARM Wear Package

GP Tips ARM Wear Package

Penetration Tips Standard Wear Pkg

Penetration/GP Tips* Standard Wear Package

GP Tips Standard Wear Pkg

Penetration Tips Standard Wear Pkg

Penetration/GP Tips* Standard Wear Package

GP Tips

PENETRATION *Since good penetration will enhance machine performance in most applications, the penetration tip should be used initially. If penetration is not a concern, then change to the General Purpose tip with its increased wear material to lower cost per hour. FS use V810 Family. ME use V880 Family.

4-34

PENETRATION

DURABILITY

Wear Plate Medium

High

DURABILITY

5000 Series Shovels MINING SHOVELS

System Wear Ratios: Understanding how your GET wears as a system will allow you to better manage GET. The following tables for the 5230, 5130B and 5130 are system averages and can vary from site to site. Ratios are based on tip life and are valid in all applications where machine operation and maintenance are performed correctly.

4-35

5000 Series Shovels 5000 SERIES INSTALLATION PROCEDURES

Tip Installation Instructions for the V1000, V880 & V810 Pin installation is relatively easy; however, if the installer is not familiar with the correct procedure, simple errors can be made which may cause the retention to fail prematurely. 1. Ensure the retainer and pin are centered. If not centered and the pin is sitting on the side of the retainer, the retainer may be damaged when the pin is driven in. If this occurs, the retainer must be replaced. If the pin was driven in all the way, it will also need to be replaced. 2. Use a 5 lb (2.25 kg) hammer to drive the pin. Excessive force or a large hammer is unnecessary and may damage the pin or retainer. If driven in too hard, you can drive the pin through the retainer. This may produce the same damage as occurs when removing the pin, making both the pin and retainer ineffective and in need of replacement. 3. After installing the pins, always check to see if they are properly seated in the retainer assembly. To ensure proper seating of the retainer ring in the pin groove, tap the pin lightly until full resistance is encountered. Tap the pin on the top and the bottom. If the pin moves, it’s not properly seated and must be tapped in further until fully seated. Recheck for proper seating. 4. When properly installed, the top of the pin should be close to flush with the top of the tip. Please Note: PINS AND RETAINERS ARE NOT REUSABLE 5. To remove the pin either the snap ring or pin groove is sheared destroying its ability to function. Pin removal usually requires several solid hits with a 12 to 20 lb (5.5 to 9.0 kg) hammer. Always use pin removal tool 1U-7184 and the appropriate safety measures. NOTE: Use of cross spring assembly is no longer required. Use can be discontinued without affecting retention.

4-36

5000 Series Shovels 5000 SERIES INSTALLATION PROCEDURES

Installation and Removal Instructions for V1000 Bottom-Installed Coupler Pin

Pin installation is relatively simple and easy; however, it’s important to be familiar with the following procedures before installation. Failure to correctly install may result in premature failure and coupler loss. 1. Remove the protective tape from the adhesive band on the top of the sleeve. Install the sleeve in the coupler’s top counterbore from the inside. When installed correctly, the large portion of the sleeve sits in the counterbore and the thinner sleeve is located in the pin hole. Ensure the sleeve is held in place by the tape. The only purpose of the tape is to hold the sleeve in place during installation.

2. Place the “one way” retainer assembly in the bottom counterbore of the coupler. The steel washer sits in the bottom of the counterbore and the tabs face up. “This Side Up” will be displayed on the top of the tab ring.

3. Install the coupler on the adapter.

4. Install the pin in the bottom coupler pin hole with the tapered end in first. Make sure the pin is centered in the retainer assembly. Using light hammer blows with a 5 lb (2.3 kg) hammer, drive the pin up through the retainer. It may take some effort to expand the snap ring initially, however, once the retainer is on the full diameter of the pin, the pin will drive in easily. A final gentle blow will enable the snap ring to drop into the pin groove. Check to see if the snap ring is properly seated by tapping on the head of the pin. When seated, a solid ping will be heard and the joint will feel solid. 4-37

5000 Series Shovels 5000 SERIES INSTALLATION PROCEDURES

If the pin is hit with excessive force just before the snap ring is engaged in the pin groove, the retainer and pin may be damaged. This will result in a premature failure. If this occurs both the pin and retainer must be replaced. Note: The pin, retainer assembly and sleeve are not reusable.

Top installed tip pin

Bottom installed coupler pin

Coupler and Tip System

Removal 1. To remove the retention system or replace the coupler, use the 1U-7184 pin removal tool, a 12-20 lb. (5.5-9.1 Kg) hammer and remove the pin from the top.

Downward Removal of All Pins

2. Place the pin removal tool (1U-7184) on the top of the pin as shown in the illustration. It will take several hard blows with the hammer to shear the retainer and drive the pin out. Once the retainer is sheared, the pin may drive out completely. Ensure the pin will not contact anything on its way out and can be removed safely. WARNING Wear safety glasses with protective side shields. Personal injury may occur if proper safety equipment is not worn.

4-38

5000 Series Shovels 5000 SERIES INSTALLATION PROCEDURES

Edge Protector Installation Instructions for the 5230 and 5130 1. Before installing the edge protectors on the 5130, drive the pin through the lug hole to clear out any debris like paint, casting sand or fines. 2. On the 5230s it will first be necessary to insert a bushing into each lug hole. Due to tolerances, some bushings will have to be driven in while others will fall through. Those with a loose fit can be held in position. Install the bushings with the slot facing sideways as shown below.

5230 Bushing (143-3103) installed in lug

3. Place a retainer assembly over each hole in the lug. 4. Lift the protector on to the lug and slide it over the retainer assemblies. The retainers can be easily repositioned over the holes if they are moved by contact with the protector. Note: If desired, the retainer assemblies can be held in place with tape while the edge protectors are positioned.

Installation of retainers and edge protector

5. Line up the protector holes over the lug and retainer holes using a pry bar. 6. Insert the tapered end of the pin down through the top of the cover and into the retainer assembly. Drive the pin down through the retainer with light hammer blows until the snap ring engages the pin groove. When this occurs, a distinct sound is heard and a high resistance is felt with further hammering. 7. Tap the pin up from the bottom to ensure the snap ring is seated in the pin groove.

Position of the assembled retention system

4-39

5000 Series Shovels 5000 SERIES INSTALLATION PROCEDURES

Removal WARNING: Wear safety glasses with protective side shields. Personal injury may occur if proper safety equipment is not worn. 1. Use the 1U-7184 Pin Removal Tool and a 1U-7245 Dead Blow Sledge to drive out the pins as shown below.

Removing pin from retainer assembly

2. Heavy blows will be required to shear or unseat the retainer assemblies from the pin groove. 3. Do not reuse either the pins or retainer assemblies. Removal of these components eliminate their ability to function.

4-40

5000 Series Shovels 5000 SERIES INSTALLATION PROCEDURES

Assembly Procedure for Sidebar Protectors WARNING Personal injury or death can result from bucket falling. Block the bucket before changing bucket tips, edge covers or sidebar protectors.

Replace retaining pins when a sidebar protector is replaced or when pin movement is detected.

Sidebar Protector Pin

Note: The pin has a larger head on the end of the pin that must face away from the machine. There is also a “BACK” marked on the rear portion of each pin that must face the operator’s seat when the pin is installed. Sidebar Protector Pins

All sidebars used with crested corner adapters are held in place using one pin only in the top pin hole. The bottom of the sidebar locks into two lugs on the side of the adapter crest. When locked in place the pin is inserted in the top hole. The bottom sidebar protection hole is inserted to allow it to be rotated. Base edges without the crested corner adapter are pinned both at the top and bottom. Pin Removal NOTICE Do not reuse used pins. Used pins may come out during operation and cause the loss of bucket tips, edge covers or sidebar protectors. This results in damage to the bucket.

Drive out the pins with a hammer and punch in the direction the pins were installed. If the shoulders of the pin lock internally, drive on the back part of the pin until movement occurs.

Hold the sidebar protector in position. Start both pins at the same time, but from opposite sides of the sidebar. Drive on both parts of each pin until they protrude equally from either side of the sidebar protector. If a heavy resistance is felt before this occurs, drive on the back part of the pin until it begins to move again. Then continue driving on both parts. 4-41

5000 Series Shovels MINING SHOVELS

Competitive Conversions: The MEGS bucket edge assemblies and sidebars can be retrofitted on competitive FS and ME Buckets of similar sized hydraulic excavators and shovels. Measurement of the competitive bucket need to be taken from outside sidebar to outside sidebar and compared to the Cat edge assembly length. If the Cat edge assembly length is similar to the competitive bucket width, the Cat assembly can be used. If, however, the competitive bucket width is not similar to the Cat edge assembly length, a custom edge assembly can be provided. Orders will take up to 30 days to produce, plus shipping time. Information required is outside of sidebar to outside of sidebar measurement, edge thickness, number of tips, spade dimension (forward and width). Modifications may be required at the rear of the edge assembly and sidebar locations of the competitive buckets. Call 1-800-BUCKET-4-U for required information. Special Instructions: Retention • See Special Instruction SEHS9733 for tip, edge protectors, and sidebar protector pin installation/removal procedures. Use 1U-7184 pin removal tool. • See Special Instruction SEHS9927 for installing the Heavy Duty Flex-Pin. • See Special Instruction REHS0016 for installation and removal of V1000 tip and coupler heavy duty GET pins and retainers. Welding • See Special Instruction SEHS9810 for welding adapters and lugs onto base edges and welding adapter noses onto adapters. • Remember, quality welding is critical in achieving optimal life from these components. • Lug welding instructions are available as a service magazine article. Always use a new pin when installing tips, edge protectors, or sidebar protectors. Publications: The following publications relate to mining shovel GET: Built Tough for Mining Best Tools in the Trade for All Your Aggregate Adapter/Base Edge Welding Special Instructions Pin Installation/Removal Special Instructions Training Package—5130 GET—Basics & Sales Opportunities 5130 Heavy Duty Flex Pin Assembly Installation of V1000 Tip and Coupler Pins and Retainers 5130 Hydraulic Shovel/Backhoe 5130 Machine Specification 5130 Hydraulic Shovel/Backhoe Specalog 5230 Specalog 5230 Salesgram 5130/5230 Mining Shovels - Selecting the Right Bucket and GET for Your Job 5130 & 5230 Buckets and GET Design Improvements & Product Offerings V1000 GET System Options V880/V810 GET System Options GET Inspection and Maintenance Guide Procedure to Install Wear Protection on Base Edges and Adapters

4-42

PEDP0044 PEHP3079 SEHS9810 SEHS9733 PEST4175 SEHS9927 REHS0016 PEHP3079 AEHQ3875 AEHQ5043 AEHQ5044 TEKQ6151 AEKK0898 TEKQ5384 PEHP7070 PEHP7071 PEXT8033 REHS0434

5000 Series Shovels NOTES

4-43

5000 Series Shovels NOTES

4-44

Hydraulic Hammers / Demolition Tools / Rock Drill Tools

Hydraulic Hammers / Demolition Tools / Rock Drill Tools — Section Contents Page Hammers Service Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-02 Tool Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-03 Tool Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-05 Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-08 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10 Matching Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-11 Demolition Tools Scrap, Demolition and Sorting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-17 Shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-19 Pulverizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-22 Crushers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-23 Grapples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-24 Mechanical Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-28 Multi-Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-29 Recommended Parts Lists: Shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-30 Pulverizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-32 Crushers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-34 Multi-Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-35 Mechanical Scrap Shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-41 Scrap Shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-42 Sorting Grapples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-46

5-1

Hydraulic Hammers / Demolition Tools / Rock Drill Tools HYDRAULIC HAMMERS — SERVICE MANUALS The Caterpillar hammer range consists of 18 models designed for Cat and competitive machines weighing from 1.3 to 80 tons (1.2 to 73 metric tons). These hammers may be divided into two primary categories according to their size: Small Hammers (H45–H100), available in both standard and sound suppressed version(s), with a low pressure accumulator for assisting the power stroke of the piston and a high pressure accumulator for carrier hydraulic system protection. Large Hammers (H115 s–H180 s), available sound suppressed as standard, with a single accumulator for carrier hydraulic system protection. Manuals are available for each hammer. The Owners Manual (OM) is intended for customer use and is shipped with each hammer. The Service Manual, for dealer use, includes the contents of the OM plus sections on Assembly and Disassembly. All manuals (except those with SEBF prefixes) can be ordered through the Cat Literature system. Those with SEBF prefixes CAN ONLY be bought from Caterpillar Work Tools in Wamego 1-800-272-2787. Hammer Model Non-current Models B70 B90 B110 B115 B130 B140 B160 B170 B195 130 90 H140 s H160 s H195 Current Models H45/H45 s H50/H50 s H63/H63 s H70/H70 s H90C/H90C s H100/H100 s H115 s H120C s H130 s H140C s H160C s H180 s

Serial Number Prefix

Owners Manual*

Service Manual

B70 B90 B110 B115 B130 B140 B160 B170 B195 4RL 4LL 4SL 4TL 4XL

SEBF0689 SEBF0691 SEBF0693 SEBF0695 SEBF0697 SEBF0699 SEBF0701 SEBF0703 SEBF0705 SEBF0766 HENR9020 RENR4116 RENR4116 RENR4116

SEBF0688 SEBF0690 SEBF0692 SEBF0694 SEBF0696 SEBF0698 SEBF0700 SEBF0702 SEBF0704 SEBF0767 HEBU9001 RENR4406 RENR4406 RENR4406

6CZ 5MZ 4GL 4KL 6TZ 4ML 4PL 9MM 7CM BED BFB 9PM

RENR4115 RENR4115 RENR4115 RENR4115 RENR4115 RENR4115 RENR4116 RENR4116 RENR4116 RENR4426 RENR4426 RENR4116

RENR4405 RENR4405 RENR4405 RENR4405 RENR4405 RENR4405 RENR4406 RENR4406 RENR4406 RENR4422 RENR4422 RENR4406

*Owners Manual also available in other languages.

5-2

Hydraulic Hammers / Demolition Tools / Rock Drill Tools HYDRAULIC HAMMERS — SMALL HAMMER TOOL APPLICATIONS Tool Selection Symbols for tools:

Chisel C

Moil M

Blunt B

1. Roadbuilding/construction Breaking of road surface (concrete, asphalt) Asphalt cutting to shape or area Breaking uneven bedrock to lay a road Trench excavation for drainage Demolition of bridges Compacting the ground Punching of holes (for traffic signs, lamp posts) Breaking of frozen ground 2. Demolition/housing development Demolition of concrete walls, roofs, floors indoors Demolition of concrete walls, roofs, floors outdoors Demolition of light, reinforced concrete foundation (