S O L A R T E C H N I K
o t g n T u r ni u n t h e s
Energy of the future
Table of Content
S O L A R T E C H N I K
Our corporate philosophy....................................................................................
3
Directions/Map...............................................................................................................
4
........................................................................................................ GEO-TEC in Spittal ........................................................................................................
5
High-Grade Steel Frame Collectors ............................................................
6-14
Aluminium Frame Collectors .............................................................................
15-22
Wood Frame Collectors ...........................................................................................
23-25
Solar Stations ..................................................................................................................
26-29
Accessories .........................................................................................................................
30-35
Solar Control Modules .............................................................................................
36-39
Storage Units, Buffers & Accessories ......................................................
40-50
Storage Units and Heat Exchangers .........................................................
51-52
Plate-type Heat Exchangers ..............................................................................
53
Tubing & Insulating Systems ..........................................................................
54-56
Stoves .......................................................................................................................................
58-61
Trade Fair and Promotional Items...............................................................
62
Solar Set ................................................................................................................................
63
General Terms and Conditions of Business ........................................
64-66
Solar Collector Systems .........................................................................................
67
Trade Fair IHS 2007 ...................................................................................................
68-69
Tinox Absorbers .............................................................................................................
70-71
S O L A R T E C H N I K
2
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Our corporate philosophy
S O L A R T E C H N I K
GEO-TEC Solartechnik GmbH is a producer of highquality solar collectors. Our endeavour is to create a basis of trust with our customers and to assist in solving their problems. This is guaranteed by great development competence, creativity and flexibility f lexibility..
Our goal is total customer satisfaction. Customer orders are treated treated with the utmost utmost care. We strive for for long term partnerships by providing the highest quality products and services.
Strict target specifications are applied to improve the quality of our products and services such that positive changes can be continuousl continuouslyy compared and measured. As a result, continuous quality improvements improvements and outstanding competitiveness competitiveness are achieved. All All suggestions and recommendations are taken very seriously and checked for their feasibility before implementation.
Due to the nature of our products, the issue of sustainability is always present. We are very conscious of our ecological responsibility to our following generations. In all of our business segments we make a big effort to protect our resources and environment.
Subject to setting and printing errors.
3
Directions/Map
S O L A R T E C H N I K
Directions to GEO-TEC : GEO-TEC Solartechnik GmbH Villacher Straße 95 A-9800 Spittal an der Drau By car:
Autobahn A 10 (Tauern autobahn) - exit Spittal EAST (OST) Take the first exit on the right onto the B B100 ("Drautal-Bundesstrasse"). Continue straight at the two roundabouts (the 2nd exit). on Villacher Strasse, you will find us past the 1st traffic light to your right.
München
Salzburg
S O L A R T E C H N I K
Spittal/ Drau
Villach
4
S O L A R T E C H N I K
S O L A R T E C H N I K
High-rise rack warehouse
Storage space 5
High-Grade Steel Frame Collectors
S O L A R T E C H N I K
GSE 2000/TIN H/TIN Q N
N N
A collector without covering frame for in-roof, (only GSE 2000/ TIN H) on-roof-mounted, and flat-roof installation. Customised concatenation is possible (in parallel and in series) Connections: 3/4" screwed connection with high-temperature seal, flat-sealing
GSE2000/TIN H N N
GEO-TEC high-performance collector, high-grade steel, „vertical“ Up to ten collectors can be combined as a collector field.
GSE2000/TIN Q N N
GEO-TEC high-performance collector, high-grade steel, „horizontal“ Up to five collectors can be combined as a collector field.
Frame
Glass Back panel Absorber
Insulation Connections Assembly
Dimensions
Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification
6
Roll-formed high-grade steel profile Edge guard around the perimeter Ventilation through specially designed riveting nuts ESG solar glass Glued frameless Aluminium, 0.6 mm Tinox, ultrasonic sealed Manifold, 22 mm Harp-shaped absorber pipes, 12/25 Stk. @ Ø 6 mm Back panel: 40 mm rock wool Sides: 10 mm rock wool 3/4" outside thread, 3/4" coupling ring •In-roof design •Roof-mounted, parallel to roof (hanger bolts and/or roof bracket, fold clamp) •Roof-mounted, raised •Flat roof, standing Length: 1985 mm Width: 985 mm Height: 77 mm 1,985 x 0,985 = 1,96 m2 1,955 x 0,955 = 1,87 m2 1 litre 96 % 81 % 36 kg Rapperswil C572 Solar Keymark
Article number
Article ID
PU
500100 500101
GSE2000/TIN H vert rtiical-format collector GSE2000/TIN Q horizonta tall-format collector
1 pallet 12 pcs 1 pallet 12 pcs
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
High-Grade Steel Frame Collectors
S O L A R T E C H N I K
GSE 2.0/TIN H N N N
A collector without covering frame for on-roof-mounted, and flat-roof installation. Customised concatenation is possible (in parallel and in series) Connections: 3/4" screwed connection with high-temperature seal, flat-sealing
GSE2.0/TIN H N N
GEO-TEC high-performance collector, high-grade steel, „vertical“ Up to ten collectors can be combined as a collector field.
Frame
Glass Back panel Absorber
Insulation Connections Assembly
Dimensions
Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification
Roll-formed high-grade steel profile Edge guard around the perimeter Ventilation through specially designed riveting nuts ESG solar glass Glued without frame Aluminium, 0.6 mm Tinox, ultrasonic sealed Manifold, 22 mm Harp-shaped absorber pipes, 13 Stk. @ Ø 6 mm Back panel: 40 mm rock wool Sides: 10 mm rock wool 3/4" outside thread, 3/4" coupling ring •Roof-mounted, parallel to roof (hanger bolts and/or roof bracket, fold clamp) or roof brackets, fold clamp) •Roof-mounted, raised •Flat roof, Standing Length: 2030 mm Width: Wid th: 10 1030 30 mm Heig He ight ht:: 77 mm 2,1 m2 2,00 m2 1 litre 96 % 81 % 37 kg Rapperswil C572 Solar Keymark
Article number
Article ID
PU
500110
GSE2.0 TIN/H ver tical-format collector
1 pallet 12 pcs
Subject to setting and printing errors.
7
High-Grade Steel Frame Collectors
S O L A R T E C H N I K
GSE 2400/TIN H/TIN Q N
N N
A collector without covering frame for in-roof, (only GSE 2400/ TIN H) on-roof-mounted, and flat-roof installation. Customised concatenation is possible (in parallel and in series) Connections: 3/4" screwed connection with high-temperature seal, flat-sealing
GSE2400/TIN H N N
GEO-TEC high-performance collector, high-grade steel, vertical Up to ten collectors can be combined as a collector field.
GSE2400/TIN Q N N
GEO-TEC high-performance collector, high-grade steel, horizontal Up to four collectors can be combined as a collector field.
Frame
Glass Back panel Absorber
Insulation Connections Assembly
Dimensions
Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification
8
Roll-formed high-grade steel profile Edge guard around the perimeter Ventilation through specially designed riveting nuts ESG solar glass Glued without frame Aluminium, 0.6 mm Tinox, ultrasonic sealed Manifold, 22 mm Harp-shaped absorber pipes, 12/31 Stk. @ Ø 6 mm Back panel: 40 mm rock wool Sides: 10 mm rock wool 3/4" outside thread, 3/4" coupling ring •In-roof design •Roof-mounted, parallel to roof (hanger bolts and/or roof bracket, fold clamp) or roof brackets, fold clamp) •Roof-mounted, raised •Flat roof, Standing Leng Le ngth th:: 24110 mm 24 Width: 985 mm Height: 77 mm 2.410 x 0.985 = 2.38 m 2 2.380 x 0.955 = 2.273 m2 1.2 litre 96 % 81 % 44 kg Rapperswil C572 Solar Keymark
Article number
Article ID
PU
500400 500600
GSE2400/TIN Hvert rtiical-format collector GSE2400/TIN Q horizonta tall-format collector
1 pallet 12 pcs 1 pallet 12 pcs
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
High-Grade Steel Frame Collectors
S O L A R T E C H N I K
GSE 2000/TIN SLIM N N
A collector without covering frame for roof-mounted and flat-roof installation Connections: 3/4" screwed connection with high-temperature seal, flat-sealing
GSE 2000/TIN SLIM N N
GEO-TEC high-performance collector, high-grade steel, horizontal Up to five collectors can be combined as a collector field.
Frame
Glass Back panel Absorber
Insulation Connections Assembly
Dimensions
Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification
Roll-formed high-grade steel profile Edge guard around the perimeter Ventilation through specially designed riveting nuts ESG solar glass Glued without frame Aluminium, 0.6 mm Tinox, ultrasonic sealed Manifold, 22 mm Harp-shaped absorber pipe, 6 mm Back panel: 40 mm rock wool Sides: 10 mm rock wool 3/4" outside thread, 3/4" coupling ring •Roof-mounted and parallel to roof (with hanger bolts or roof brackets, fold clamp) •Roof-mounted, raised Length 1985 mm Width: 385 mm Height: 77 mm 0.764 m2 0.691 m2 0.4 litre 96 % 75 % 16 kg Rapperswil C645
Article number
Article ID
PU
500200
GSE2000/TIN SLIM vert rtiical-format collector
1 pallet 24 pcs
Subject to setting and printing errors.
9
High-Grade Steel Frame Collector
S O L A R T E C H N I K
Connecting Materials Connection Set, left/right All parts made of brass, sensor immersion sleeve soldered in, incl. high-temperature seals, design for left or right solar forward flow. All sealing points are flat-sealing. 3/4" connections Consists of: N Corner sleeve (3/4" coupling ring/ 3/4" outside thread, flat-sealing) N Sensor right-angle connection (3/4" coupling ring/ 3/4" outside thread, N Sensor immersion sleeve Ø 6.2 mm) N Plug (3/4" outside thread, flat-sealing) N End cap (3/4" internal thread , flat-sealing ) Art rtiicle number Sets:
Description
11000100 1100 0002 0200 00
Connection set fo forr solar forw rwaard fl floow, left Conn Co nnec ecttio ionn se sett fo forr sol olar ar fo forw rwar ardd fl flow ow,, rig ight ht
Individual parts:
11000001 1100 0000 0006 06 1100 0000 0021 21 1100 0000 0022 22 11000003 11000004 11000005 510305
Right-angle conne neccto torr, universal Righ Ri ghtt-an angl glee co conn nnec ecto torr, un univ iver ersa sal, l, wi with th co coup upli ling ng nu nutt Righ Ri ghtt-an angl glee co conn nnec ecto torr, ri righ ght, t, wi with th se sens nsor or im imme mers rsio ionn sl slee eeve ve Righ Ri ghtt-an angl glee co conn nnec ecto torr, le left, ft, wi with th se sens nsor or im imme mers rsio ionn sl slee eeve ve End cap End plug High-tem empperature seal 3/4", 24 x 17 x 1.5 mm Sealing plates
Connection Hose Set Consists of: N High-grade steel corrugated tube DN 16, 1000 mm, 2x 3/4" Natural rubber insulation 13 mm N High-grade steel corrugated tube DN 16, 1000 mm, 2x 3/4" Rubber insulation 13, with sensor cable drawn in, PT1000 (silicon) 1500 mm N 1 double nipple 3/4" flat-sealing N 4 high-temperature solar seals Transition to high-grade steel corrugated tube or copper tube by means of Easy-Drill screwed connection (see delivery programme, tube and insulating systems). Plastic-wrapped as set, suitable for indoors and outdoors Article number
Article ID
11001000
Connection Hose Set
10
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
High-Grade Steel Frame Collectors
S O L A R T E C H N I K
Installation Materials HANGER BOLT System N N
N N N N
High-grade steel Completely pre-assembled pre-assembled for installains tallation of the aluminium T-profile with or without connecting profile Length : 350 mm, Ø 12 mm Aluminium clamp EPDM tile sealing rubber Stainless steel nuts and shims
CONNECTING RAIL VL H N N N N N
Aluminium connecting rail for stabilising T-profiles 2163 mm for GSE 2000 H and GSE 2.0, 2588 mm for GSE 2400 H For fast mounting of flat collectors vertical For roof bracket installation One connecting rail is required per collector
ROOF BRACKET System N
N
N
Aluminium base, 180 mm, 50/40/10 mm perforated Aluminium bracket for mounting the aluminium T-profile with connecting profile Complete with stainless steel connecting bolts and aluminium clamp-type holder
T-profile for mounting highgrade steel frame collectors with vertical or horizontal format N N N N
Bare aluminium , in fixed lengths Slotted , 50 mm Corrugated gripping side 50 x 50 x 5 mm
VLQ N
N N N N
Aluminium connecting rail for stabilising T-profiles 1163 mm for GSE 2000Q and GSE 2400 Q For fast mounting of flat collectors, horizontal For roof bracket installation Two connecting rails are required per collector.
Article number
Description
Dimensions
770002 7700 0201 01 7700 77 0000101 77082301 770 7082 8230 3022 77082305 520702 520703 520710 520701 520730 520740 520731 520732
Roof br Roof brac acke kett co comp mple lete te,, pr prea eass ssem embl bled ed Hang Ha nger er bo bolt lt,, co comp mple lete te,, pr pree-as asse semb mble ledd Connecting ra raiil, vert rtiical Conn Co nnec ecttin ingg ra rail il,, ho hori rizo zont ntal al Connecting ra raiil for GSE 2400 H T-PROFILE for 2 ver tical T-PROFILE for 3 ver tical T-PROFILE for 6 ver tical T-prof ile for 1, horizontal T-prof ile for 2, horizontal T-prof ile for 3, horizontal T-prof ile for 1 horizontal GSE 2400 T-prof ile for 2 horizontal GSE 2400
2034 mm 3051 mm 6102 mm 2018 mm 4036 mm 6054 mm 2442 mm 4884 mm
Subject to setting and printing errors.
-
11
High-Grade Steel Frame Collectors
S O L A R T E C H N I K
Installation Materials KV 2 Clamp Connector Set Clamp Connector Set for connecting aluminium T-profiles and FDRA 70 mm wide 2 drilled holes 12.5 mm With stainless steel bolts, nuts and shims
N N N N
Fold clamp Bare aluminium 125 mm
N N
Hanger bolt / flange plate High-grade steel Completely preassembled with flange and seal Length : 350 mm, Ø 12 mm
N N N
Article number
Description
77000302 77099503 77000200
Clamp Connector Set (2 units) Fold clamp Hanger bolt/flange plate
METAL CLADDING SET (basic set & extended set) for vertical-format collectors GSE 2000H and GSE 2400H Aluminium, "prefa brown" Packed in cardboard box with installation instructions Suitable for roofs with an incline of at least 30° Only for GSE 2000H and GSE 2400H Basic set for two collectors each Extension set for every additional collector
N N N N N N
Article number
Description
Dimensions
Weight
520500 520510
Basic set GSE 2000H Extension set GSE 2000H
200/350/2030 200/350/2030
9 kg 3 kg
520520 520530
Basic set GSE 2400H Extension set GSE 2400H
200/350/2500 200/350/2500
10 kg 4 kg
12
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
High-Grade Steel Frame Collectors
S O L A R T E C H N I K
Installation Materials Flat-roof open-frame set-up N N N
N N N N N N N
For flat roofs, industrial buildings, etc. For mounting on concrete base or I-beams The substructure, fastening and bracing have to be provided by the customer. Statics-tested support structure Consists of aluminium angle profiles, 40/40/4mm, bare T-profiles are already included With stainless steel bolts and assembly instructions Partially pre-assem pre-assembled bled Plastic-packed and labelled Sets for multiple collectors
Sets for various support structure variations: N N N N N
2, 3 or 6 GSE 2000H 45° 2, 3 or 6 GSE 2000H 60° 2, 3 or 6 GSE 2400H 45° 2, 3 or 6 GSE 2400H 60° 1, 2 or 3 GSE 2000Q 45° Article number
Description
Dimensions
Weight
520410 520420 520432
FDFR A for 2 GSE 2000H 45° FDFR A for 3 GSE 2000H 45° FDFR A for 6 GSE 2000H 45°
2200/100/150 mm 3200/200/150 mm 6200/200/150 mm
15 kg 20 kg 40 kg
520460 520480 520470
FDFR A for 2 GSE 2000H 60° FDFR A for 3 GSE 2000H 60° FDFR A for 6 GSE 2000H 60°
2200/200/150 mm 3200/200/150 mm 6200/200/150 mm
15 kg 20 kg 40 kg
520440 520450 520900
FDFR A for 2 GSE 2400H 45° FDFR A for 3 GSE 2400H 45° FDFR A for 6 GSE 2400H 45°
2500/100/150 mm 3200/200/150 mm 6200/200/150 mm
17 kg 22 kg 44 kg
520200 520201 520210
FDFR A for 2 GSE 2400H 60° FDFR A for 3 GSE 2400H 60° FDFR A for 6 GSE 2400H 60°
2500/200/150 mm 3200/200/150 mm 6200/200/150 mm
17 kg 22 kg 44 kg
520430 520411 520400
FDFR A for 1 GSE 2000Q 45° FDFR A for 2 GSE 2000Q 45° FDFR A for 3 GSE 2000Q 45°
2200/200/150 mm 4400/200/150 mm 6200/200/150 mm
12 kg 24 kg 36 kg
520490 520495 520496
FDFR A for 1 GSE „SLIM“ 45° FDFR A for 1 GSE 2400Q 45° FDFR A for 2 GSE 2400Q 45°
450/200/150 mm 2450/200/150 mm 4900/200/150 mm
9 kg 24 kg 48 kg
Note: For four collectors, be sure to use two double-unit sets + one KV 2 connection set . For five collectors, use one double-unit set and one triple-unit set + one KV 2 connection set. Subject to setting and printing errors.
13
High-Grade Steel Frame Collectors
S O L A R T E C H N I K
Installation Materials 20° Inclination Can be used for each collector for hanger bolt and roof bracket Bare aluminium, including high-grade steel bolts and brackets
N
N
Note:
In the 20° INCLINATION no T-profile, no connecting rail, no roof bracket and no hanger bolt are included!
Article number
Description
PU
77000401 520302 77000404
20° Inclination for GSE 2000H 20° Inclination for GSE 2400H 20° Inclination for GSE 2000Q and GSE 2400Q
per collector per collector per collector
Concrete ballast Concrete block for stabilisation of the substructure for collectors (free-standing rooftop frame installation) Weight per concrete base: 180 kg or 120 kg
N
N
Article number
Description
Type
77035500 7703 77 0355 55001
Concrete ballast 180x26x16 per 0,18 tons Conc Co ncrret etee ba ball llas astt 110x 0x226x 6x116 per 0, 0,112 to tons ns
vert rtiical horriz ho izon onta tal l
14
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Aluminium Frame Collectors
S O L A R T E C H N I K
ALU 2000 H/Q/US N
N N
A collector suitable for in-roof), modular collector field, on-roof-mounted and flat-roof installation. Concatenation can be done serially or in parallel fashion. Connections: 3/4" screwed connection with high-temperature seal, flat-sealing
ALU 2000 H/US N N
GEO-TEC high-performance collector vertical Up to 10 collectors can be connected in parallel fashion.
ALU 2000 Q/US N N
GEO-TEC high-performance collector collector,, horizontal format Up to 5 collectors can be connected in parallel fashion.
Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification
Aluminium extruded profile, only one connection on the underside, complete frame bare made of one bent piece of frame profile with vents, high-temperature-resistant junction seal ESG solar glass with high-temperatureresistant seal pressed with aluminium profile Aluminium/stucco Tinox, ultrasonic welded Manifold, 22 mm Harp-shaped absorber pipe, 10/20 pcs @ Ø 8 mm Back panel: 40 mm rock wool 3/4" outside thread, 3/4" coupling ring •In-roof design •Roof-mounted, parallel to roof (hanger bolts or roof brackets, fold clamp) •Roof-mounted, raised •Flat roof, Standing Length: 2045 mm Width: 1045 mm Height: 76 mm 2.045 m x 1.045 m = 2.144 m 2 2.000 m x 1.000 m = 2.00 m2 1 litre 93.75 % 80% 37 kg Arsenal Research; No. 2.04.00201. 2.04.00201.1.0 1.0 Solar Keymark (on order!)
Article number
Article ID
PU
77002002 77003002
ALU 2000 H/US Vert rtiical-Format Collector ALU 2000 Q/US Horizonta tall-Fo Form rmaat Collector
1 pallet 12 pcs 1 pallet 12 pcs
Frame
Glass Back panel Absorber
Insulation Connections Assembly
Dimensions
Subject to setting and printing errors.
15
Aluminium Frame Collectors
S O L A R T E C H N I K
ALU 2000 H/Q A collector suitable for in-roof, modular collector field, roof-mounted and flat-roof installation. Concatenation can be done serially or in parallel fashion. Connections: 3/4" screwed connection with high-temperature seal, flat-sealing
N
N N
ALU 2000 H
GEO-TEC high-performance collector collector,, vertical Up to 10 collectors can be connected in parallel fashion.
N N
ALU 2000 Q
GEO-TEC high-performance collector collector,, horizontal format Up to 5 collectors can be connected in parallel fashion.
N N
Gross surface area Absorber area Collector volume Surface area utilised Collector efficiency Weight Verification Verification
Extruded aluminium profiles Only one connection on the lower side Complete frame bent from piece anodised Frame profile with vents, high-temperatureresistant junction seal ESG solar glass with high-temperature-resistant seal pressed with aluminium profile Aluminium/stucco Tinox, soldered Manifold, 22 mm Harp-shaped absorber pipe, 10/20 pcs @ Ø 8 mm Back panel: 40 mm rock wool 3/4" outside thread, 3/4" coupling ring •In-roof design •Roof-mounted, parallel to roof (hanger bolts and/or roof bracket, fold clamp) •Roof-mounted, raised •Flat roof, Standing Length: 2045 mm Width: 1045 mm Height: 76 mm 2.045 m x 1.045 m = 2.144 m 2 2.003 m x 1.000 m = 2.00 m2 1 litre 93.75 % 80% 37 kg Arsenal Research; No. 2.04.00201 2.04.00201.1.0 .1.0 Solar Keymark (on order!)
Article number
Article ID
PU
77002000 77003000
ALU 2000 Ver tical-Format Collector ALU 2000 Horizontal-Format Collector
1 pallet 12 pcs 1 pallet 12 pcs
Frame
Glass Back panel Absorber
Insulation Connections Assembly
Dimensions
16
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Aluminium Frame Collectors
S O L A R T E C H N I K
ALU 450 Q N N N
A collector suitable for installation both roof-mounted and parallel to roof. Concatenation can be done serially or in parallel fashion. Connections: 3/4" screwed connection with high-temperature seal, flat-sealing
ALU 450 Q N N
GEO-TEC high-performance collector, horizontal format Up to 5 collectors can be connected in parallel fashion.
Grosss su Gros surfac rfacee ar area ea Abssorber area Ab Collector volume Surfac Su rfacee ar area ea ut util ilis ised ed Coll Co llec ecto torr ef effi fici cien enccy Weight Verifi ficcation
Extruded aluminium profiles Only one connection on the lower side Complete frame bent from piece anodised Frame profile with vents High-temperature-resistant junction seals ESG solar glass with high-temperature-resistant seal pressed with aluminium profile Aluminium/stucco Tinox, soldered Harp-shaped absorber pipe, 20 pcs @ Ø 8 mm Back panel: 40 mm rock wool 3/4" outside thread, 3/4" coupling ring •Installed in roof-mounted fashion or parallel to roof (hanger-bolt and roof-bracket installation) •Roof-mounted, raised •Flat roof, standing Length: 2045 mm Width: 450 mm Height: 76 mm 2.04 2. 0455 m x 0. 0.45 4500 m = 0. 0.92 9211 m2 2.000 m x 0.405 m = 0.810 m2 0.6 li littre 93.7 93 .755 % 80% 80 % 17 kg Solar Keymark (on order!)
Article number
Article ID
PU
77000450
horizontal-format collector
1 pallet 24 pcs
Frame
Glass Back panel Absorber Insulation Connections Assembly
Dimensions
Subject to setting and printing errors.
17
Aluminium Frame Collectors
S O L A R T E C H N I K
Connecting materials Connection Set, left/right All parts made of brass, sensor immersion sleeve soldered in, incl. high-temperature seals, design for left or right solar forward flow. All sealing points are flat-sealing. 3/4" connections Consists of: N Right-angle connector (3/4" coupling ring / 3/4" outside thread, flat-sealing) N Sensor right-angle connection (3/4" coupling ring/ 3/4" outside thread, N Sensor immersion sleeve (6.2 mm) N Plug (3/4" outside thread, flat-sealing) N End cap (3/4" internal thread, flat-sealing) Art rtiicle number Sets:
Description
11000100 1100 0002 0200 00
Connection set fo forr solar forw rwaard fl floow, left Conn Co nnec ecttio ionn se sett fo forr sol olar ar fo forw rwar ardd fl flow ow,, rig ight ht
Individual parts:
11000001 1100 0000 0006 06 1100 0000 0021 21 1100 0000 0022 22 11000003 11000004 1100 0000 0005 05 510305
Right-angle conne neccto torr, universal Righ Ri ghtt-an angl glee co conn nnec ecto torr, un univ iver ersa sal, l, wi with th co coup upli ling ng nu nutt Righ Ri ghtt-an angl glee co conn nnec ecto torr, ri righ ght, t, wi with th se sens nsor or im imme mers rsio ionn sl slee eeve ve Righ Ri ghtt-an angl glee co conn nnec ecto torr, le left, ft, wi with th se sens nsor or im imme mers rsio ionn sl slee eeve ve End cap End plug High Hi gh-t -tem empe pera ratu turre se seal al 3/ 3/4” 4”,, 24 x 17 x 1,5 mm Sealing plates
Connection Hose Set Consists of: N High-grade steel corrugated tube DN16, 1000 mm, 2x 3/4" coupling ring, Rubber insulation 13 mm N High-grade steel corrugated tube DN16, 1000 mm, 2x 3/4" coupling ring, Rubber insulation 13, with sensor cable drawn in, PT1000 (silicon) 1500 mm N 1 double nipple 3/4" flat-sealing N 4 high-temperature solar seals Transition to high-grade steel corrugated tube or copper tube by means of Easy-Drill screwed connection (see delivery programme, tube and insulating systems). Plastic-packed as set, suitable for indoors and outdoors Art rtiicle number
Description
11001000
Connection Hose Set
18
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Aluminium Frame Collectors
S O L A R T E C H N I K
Installation materials HANGER BOLT System N N
N N N N
High-grade steel Completely pre-assembled pre-assembled for in stallation of the aluminium T-profile with or without connecting profile Length : 350 mm, Ø 12 mm Aluminium clamp EPDM tile sealing rubber Stainless steel nuts and shims
CONNECTING RAIL VL H N N N N N
Aluminium connecting rail for stabilising T-profiles Length 2163 mm for ALU 2000H and ALU 2000H/US For fast mounting of flat collectors vertical For roof bracket installation One connecting rail is required per collector
ROOF BRACKET System N
N
N
Aluminium base, 180 mm, 50/40/10 mm perforated Aluminium bracket for mounting the aluminium T-profile with connecting profile Complete with stainless steel connecting bolts and aluminium clamp-type holder
T-PROFILES FOR MOUNTING aluminium frame collectors with vertical or horizontal format N N N N
Bare aluminium , in fixed lengths Slotted, 50 mm Corrugated gripping side 50 x 50 x 5 mm
VL Q N
N N N N
Aluminium connecting rail as per drawing, bare Length : 1163 mm for ALU 2000H and ALU 2000H/US For fast mounting of flat collectors, horizontal For roof bracket installation Two connecting rails are required per collector.
Article number
Description De
Dimensions
770002 7700 02001 7700 77 0000101 77082301 77082302 77099407 77099405 77099403 77099406 77099420 77099421
Roo ooff bra rack cket et co com mpl plet ete, e, prea eass ssem embble ledd Hang Ha nger er bo bolt lt,, co comp mple lete te,, pr pree-as asse semb mble ledd Connecting rail, vert rtiical Connecting ra raiil, horizonta tal l T-PROFILE for 2, ver tical T-PROFILE for 3, ver tical T-PROFILE for 6, ver tical T-PROFILE for 1, horizontal T-PROFILE for 2, horizontal T-PROFILE for 3, horizontal
2162 mm 3243 mm 6486 mm 2081 mm 4162 mm 6243 mm
Subject to setting and printing errors.
19
Aluminium Frame Collectors
S O L A R T E C H N I K
Installation materials KV 2 Clamp Connector Set Clamp Connector Set for connecting aluminium T-profiles 70 mm wide 2 drilled holes 12.5 mm With stainless steel bolts, nuts and shims
N N N N
Fold clamp Bare aluminium 125 mm
N N
Hanger bolt / flange plate High-grade steel Completely preassembled with Length: 350 mm, Ø 12 mm
N N N
Arti Ar ticl clee num umbe berr
Desc De scri ript ptio ion n
77000302 77099503 77000200
Clamp Co Cla Connnecto torr Set (2 uni nitts) Fold clamp Hanger bolt/fl flaange plate
METAL CLADDING SET (basic set & extended set) for vertical-format collector ALU 2000H Aluminium, "prefa brown" Packed in cardboard box with installation instructions Suitable for roofs with an incline of at least 30° Basic set for two collectors each Extension set for every additional collector Metal cladding for horizontal-format collector available "Charcoal" metal cladding available on request
N N N N N N N
Article number
Description
Dimensions
Weight
12801911 12801901 12801916 12801917 12800000 12800002
Basic Set ALU 2000H Extended set ALU 2000H Basic Set ALU 2000H übereinander Extended set ALU 2000H übereinander Cosmetic cover strip ALU 2000H Cosmetic cover strip ALU 2000Q
200/350/2030 200/350/2030 200/350/2030 200/350/2030
12,50 kg 6,50 kg 12,50 kg 6,50 kg 2 kg 1,20 kg
20
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Aluminium Frame Collectors
S O L A R T E C H N I K
Installation materials Flat-roof open-frame set-up N N N
N N N N N N N
For flat roofs, industrial buildings, etc. For mounting on concrete base or I-beams The substructure, fastening and bracing have to be provided by the customer. Statics-tested support structure Consists of aluminium angle profiles, 40/40/4, bare T-profiles are already included With stainless steel bolts and assembly instructions Partially pre-assem pre-assembled bled Plastic-packed and labelled Sets for multiple collectors
Sets for various support structure variations: N N N
2, 3 or 6 ALU 2000H 45° 2, 3 or 6 ALU 2000H 60° 1, 2 or 3 ALU 2000Q 45°
Article number
Description
Dimensions
Weight
77024501 77034501 77064501
FDFR A for 2 ALU 2000H 45° FDFR A for 3 ALU 2000H 45° FDFR A for 6 ALU 2000H 45°
2200/100/150 mm 3200/200/150 mm 6200/200/150 mm
15 kg 20 kg 40 kg
77026001 77036001 77066001
FDFR A for 2 ALU 2000H 60° FDFR A for 3 ALU 2000H 60° FDFR A for 6 ALU 2000H 60°
2200/200/150 mm 3200/200/150 mm 6200/200/150 mm
15 kg 20 kg 40 kg
77014501 77000304 77001000
FDFR A for 1 ALU 2000Q 45° FDFR A for 2 ALU 2000Q 45° FDFR A for 3 ALU 2000Q 45°
2200/200/150 mm 4400/200/150 mm 6200/200/150 mm
12 kg 24 kg 36 kg
77045001
FDFR A for 1 ALU 450Q 45°
450/200/150 mm
9 kg
Note: For four collectors, be sure to use two double-unit sets + one KV 2 connection set. For five collectors, use one double-unit set and one triple-unit set + one KV 2 connection set.
Subject to setting and printing errors.
21
Aluminium Frame Collectors
S O L A R T E C H N I K
Installation materials 20° Inclination Can be used for each collector for hanger bolt and roof bracket Bare aluminium, including high-grade steel bolts and brackets
N
N
Note:
In the 20° inclination no T-profile, no connecting rail, no roof bracket and no hanger bolt are included!
Article number
Description
PU
77000401 77000404
Inclination 20° for ALU 2000H Inclination 20° for ALU 2000Q
1 Set/collector 1 Set/collector
Concrete block N
N
Concrete ballast to stabilise the substructure for collectors (freestanding rooftop frame installation) Weight per concrete base: 180 kg or 120 kg
Article number
Description
Type
77035500 7703 77 0355 55001
Concrete ballast 180x26x16 per 0.18 to tonns Conc Co ncrret etee ba ball llas astt 110x 0x226x 6x116 per 0. 0.112 to tons ns
vert rtiical horriz ho izon onta tal l
22
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Wood Frame Collectors
S O L A R T E C H N I K
IK 2000 / TIN H IK 2000 / TIN H
The GEO-TEC high-performance collector with wood frame and a collector area of 2.0 m ², was designed for in-roof installation and can be easily integrated into the room on the roof battens, without a crane for the installation. A maximum of six modules in a row can be concatenated in serial order.
Frame Glass Back panel Absorber
Insulation Connections Sealing Dimensions
Gross surface area Absorber area Collector efficiency Collector volume Weight Verification
Wood ESG solar glass , textured Wood Tinox, soldered Manifold, 22 mm Harp-shaped absorber pipes 10 pcs. @ Ø 8 mm 50 mm rock wool 3/4" outside thread, flat-sealing EPDM rubber profile, UV-resistant Length: 2010 mm Width: 1000 mm Height: 113 mm 2.01 m2 1.79 m2 76 % 1.4 litre 43 kg Arsenal Research; No. 2.04.00110.1.0-1(2)
Article number
Article ID
PU
77030001
IK 2000 / TIN H wood frame collector
1 pallet 12 pcs
Subject to setting and printing errors.
23
Wood Frame Collectors
S O L A R T E C H N I K
Installation materials Covering Frame A covering frame for tile or Eternit roofing, made of powder-coated sheet metal; colour: charcoal; from roof inclinations of 30°. The covering frames include the items required to install roof covering. The Basic Set includes: N N N N N
1 unit of sheet metal cladding for two collectors 2 side closing profiles 1 cover strip 1 sensor tube extension Installation Instructions
The Extension Set includes: N
The Basic Set on top of one another includes: N
N N N
1 sheet metal cladding for 2 collectors one above the other 2 side closing profiles 1 cover strip Installation Instructions
N
1 sheet metal cladding for one collector 1 cover strip
The Extension Set on top of one another includes: N
N
1 of sheet metal cladding for one collector, on top of one another 1 cover strip
Art rtiicle number
Des esccription
77030511 77030521
Covering Frame Basic Set, 4 m², tile Covering Fra ram me Extended Set, 2 m², tile
77030516 77030526
Covering Frame Basic Set, 4 m², Eternit Covering Fra ram me Extended Set, 2 m², Eternit
770308 7703 08441 7703 77 0308 0846 46
Coveri Cove ring ng Fr Fram amee Ba Basi sicc Se Set, t, on to topp of on onee an anot othe herr, 4 m² Cove Co veri ring ng Fr Fram amee Ex Exte tend nded ed Se Set, t, ne next xt to to/o /onn to topp of on onee an anot othe herr, 2 m²
Collector connectors Corrugated-tube collector connectors:
Flat-sealing screwed connection, incl. insulation, for connecting collectors
Collector Terminal Connector For connecting the forward and return flow for a collector field Corrugated tube connection set:
flat-sealing, 3/4" connection, for connection in the attic space
Art rtiicle number
Description
770320 7703 20001 7703 77 0320 2002 02
Corruuga Corr gate tedd tu tubbe co coll llec ecto torr co conn nnec ecto torr fo forr IK2 K200 0000 A co corr rrug ugat ated ed tub ubee co conn nnec ecti tion on set fo forr IK IK20 20000
24
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Wood Frame Collectors
S O L A R T E C H N I K
Installation materials Planning Chart for Covering Frame Sets (roof inclination from 30°) 1x2
1x3
1x4
1x5
1x6
2x2
2x3
2x4
2x5
2x6
IK2000 G 4 Z IK2000 E 2 Z IK2000 GÜ 4 IK2000 EÜ 2
1
1 1
1 2
1 3
1 4
1
1 1 1 1
1 2 1 2
1 3 1 3
1 4 1 4
IK2000 G 4 E IK2000 E 2 E IK2000 GÜ 4 IK2000 EÜ 2
1
1 1 1 1
1 2 1 2
1 3 1 3
1 4 1 4
Collectors per row Article Arti cle num number ber
Descri Des cripti ption on
TILE
77030511 77030521 77030841 77030846
1
ETERNIT
77030516 77030526 77030841 77030846
1 1
1 2
1 3
1 4
1 1
Planning Chart, Accessories (not included in price) Select the suitable collector connectors and connection sets on the previous page.
Collectors per row
1x2
1x3
1x4
1x5
1x6
2x2
2x3
2x4
2x5
2x6
1 2
2 2
3 2
4 2
5 2
2 4
4 4
6 4
8 4
10 4
Designation
Collector connectors Connection set
Subject to setting and printing errors.
25
Solar Stations
S O L A R T E C H N I K
Solar Pump Stations without Control Systems SINGLE-LINE/DOUBLE-LINE PUMPING UNIT Product description The GEO-TEC Single-Line DN 25 Solar Station is a single-line solar pumping pumping unit with all the equipment necessary necessary for operation. It installs in the return flow and is equipped with a Wilo ST 25/6 pump. The pump can be shut off by means of a ball valve and a flowmeter that can be completely shut off, making it possible to replace the pump with little effort.
Fittings
Safety device
Pump Rated size Connections Gravity brake
Flow meter
Fittings Seals Insulation Max. pressure Max. temperature Single-line
Double-line
Double-line Special features
The GEO-TEC Double-Line DN 25 solar station is a double-line solar pump station for forward and return flow. All the fittings necessary neces sary for opera operation tion are integ integrated. rated. The forwar forward-flow d-flow line and the pump in the return-flow line can be completely shut off. The unit is completely pre-assembled and inspected for leakage.
2 gravity brakes Flow meter Rinsing Rinsi ng and filling system Safety device Wall bracket Complete insulation Safety valve, 6 bar Pressure gauge 10 bar Connection for expansion tank to 60 litres WILO ST 25/6 (6 m delivery head ) 130 mm installation length DN 25 1" euro-cone for compression fitting Brass Cracking pressure: 20 mbar With FlowUno in the forward flow, customers must be very sure to install SKB! Measuring range from 2-15 litres Suspended solid particles, serves as fast-acting power brake for precise regulation of solar collector systems Brass EPDM/Teflon EPP = 0.041 W/(m*K) 10 bar 120°, for a brief period 160°C Centre-to-centre distance: 100 mm Width of insulation: 180 mm Height of insulation: 375 mm Centre-to-centre distance: 100 mm Width of insulation: 250 mm Height of insulation: 375 mm Built-in AIR-STOP to degas the heat-transfer medium Forward flow and return with ball valves
Art rtiicle number
Description
143 4300100 0022 143 4300100 0011
Solarr pu Sola pump mpin ingg un unit it,, si sing ngle le-l -lin inee DN 25 wi with thou outt co cont ntrrol sy syst stem em Sola So larr pu pump mpin ingg un unit it,, do doub uble le-l -lin inee DN 25 wi with thou outt co cont ntrrol sy syst stem em
26
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Solar Stations
S O L A R T E C H N I K
Compact Solar Pump Stations with Control System COMPACT WITH CONTROL SYSTEM Product description The GEO-TEC Compact Double-Line solar station includes a double-line solar pumping unit and the GEO-TEC controllers SR1, SR2 or SR3, as desired. This station is a double-line solar pumping unit for forward and return flow. All the fittings necessary for operation are inte-
Fittings
Safety device
Pump Rated size Connections Gravity brake
Flow meter
Fittings Seals Insulation Max. pressure Max. temperature Dimensions
Special features
grated. The forward-flow line and the pump in the return-flow line can be completely shut off. Due to the pr pre-a e-asse ssembl mbled ed con contr trol ol syst system, em, ins install talling ing the station does not involve much, because parts are already pre-wired.
2 gravity brakes Flow meter Rinsing and filling system Safety device Wall bracket Complete insulation Safety valve, 6 bar Pressure gauge 10 bar Connection for expansion tank to 60 litres WILO ST 25/6 (6 m delivery head ) 130 mm installation length DN 25 1" euro-cone for compression fitting Brass Integrated in thermal valves Cracking pressure: 200 mm water column Measuring range from 2-15 litres Suspended solid particles, serves as fast-acting power brake for precise regulation of solar collector systems Brass EPDM/Teflon EPP = 0 041 W/(m*K) 10 bar 120°, for a brief period 160°C Centre-to-centre distance: 100 mm Width of insulation: 250 mm Height of insulation: 375 mm Automatic air bleeder permanently built in Forward flow and return with ball valves Incl. compression fitting for 22 diameter
Arti Ar ticl clee nu numb mber er
Desc De scri ript ptio ion n
143 4301 0100 0000 142 4205 0500 0011 142 4206 0600 0011
Compac Comp actt so sola larr pu pump mpin ingg un unit it wi with th SR SR11 si sing ngle le-c -cir ircu cuit it co cont ntro roll mo modu dule le Comp Co mpac actt so sola larr pu pump mpin ingg un unit it wi with th SR SR22 do doub uble le-c -cir ircu cuit it co cont ntro roll mo modu dule le Comp Co mpac actt so sola larr pu pump mpin ingg un unit it wi with th SR SR33 mu mult ltii-ci circ rcui uitt co cont ntro roll mo modu dule le
Subject to setting and printing errors.
27
Solar Stations
S O L A R T E C H N I K
Freshwater Freshwat er Unit GEO-TEC Regumag X-30 Freshwater Unit Product description The GEO-TEC Freshwater Unit is an inline heater with high capacity and very convenient to operate for detached and semi-detached homes. The GEO-TEC Fresh Water Unit reaches the standard capacity for a housing unit already with primary forward flow temperature of just 60° C. The GEO-TEC Freshwater Unit is especially well-suited for solar collector systems.
Fittings Rated size Connections Insulation Tube connections Calcification
Pressure stage Max. temperature CW static pressure Weight Connections Dimensions with cladding Safety valve
High-grade steel plate heat exchanger PTC controller DN 25 1" outside thread, flat-sealing 1" euro-cone for compression fitting Insulation made of EPP Colour: charcoal High-grade steel, compact and space-saving design Calcification-proof to 35° C, 100° C buffer temperature and 50° C hot water tap temperature PN 10 120° C 2.0 bar 30 kg 1" outside thread, flat-sealing Height: 860 mm Width: 500 mm Depth: 260 mm Drinking water circuit at 10 bar
Controller Controller
r e g n a h c x e t a e H
Model: Regumaq X
Article number
Description
140 4002 0270 7055 14000025
Fres eshw hwat ater er un unit it wi with thoout cir ircu cula lattio ionn pu pum mp X-3 -300 Freshwa watter unit with circulation pump XZ-30
28
t i n u e g a r o t S
t i n u e g a r o t S
r e g n a h c x e t a e H
Mod odeel: Regumaq XZ
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Solar Stations
S O L A R T E C H N I K
Solar Stratified Storage Unit GEO-TEC Solar Stratified Storage Unit Regusol X-DUO 15/25 Product description The GEO-TEC Solar Stratified Storage Unit is for loading a buffer storage unit in optimum fashion in two levels. This compact and entirely preassembled system is completely insulated, has a generously dimensioned plate-type heat exchanger, is prewired with a preset controller, enabling simple and fast installation and reliable initial start-up. The GEO-TEC Solar Stratified Storage Unit is equipped with a flowmeter as standard. The control system is incorporated in the insulation invisually appealing. The entire station has a very sturdy design. Turbulent flow-through of the plate-type heat exchanger provides for a good self-cleaning effect.
Fittings
Safety device Pump Connections Insulation Max. pressure Max. temperature
Dimensions SSLE 30
SSLE 50
2 gravity brakes Electronic three-way valve Rinsing and filling system Safety device Wall bracket Complete insulation Safety valve, 6 bar, primary / 3 bar secondary Pressure gauge UPS 15-60/130 (primary) UPS 15-60/130 (secondary) Primary: 1" euro-cone for compression fitting Secondary: 1" flat-sealing, outside thread EPP = 0.041 W/(m*K) Primary: to PN 6 Secondary: to PN 10 Primary: continuous operation 120° Secondary: continuous operation 110° Start-up temperatures to 160°C Total width: 560 mm Total height: 860 mm To a max. of 30 m² of collector area Flow rate, primary: 6 l/min Flow rate, secondary: 5.4 l/min To a max. of 50 m² of collector area Flow rate, primary: 10 l/min Flow rate, secondary: 9 l/min
s s o l e r u s s e r P
VFS: Flow rate und temperature sensor K1: Collector field P1: Connection of pump to solar circuit P2: Connection of pump to load circuit SP1: Storage tank T1: Collector temperature T2: Heat exchanger inlet from collector
Article number
Description
150 500000 00001 150 500000 0002 02 150 500000 0009 09 150 50000120
Str trat atif ifie iedd Sto tora ragge Uni nitt DUO 15 wi with th co cont ntrrol sy syst stem em Str trat atif ifie iedd Sto tora ragge Uni nitt DUO 25 wi with th co cont ntrrol sy syst stem em Str trat atif ifie iedd Sto tora ragge Uni nitt DUO 15 wi with thou outt co cont ntrrol sy syst stem em Str trat atif ifie iedd Sto tora ragge Uni nitt DUO 25 wi with thoout co cont ntrrol sys yste tem m
Subject to setting and printing errors.
w o l f e r u s s e r P
t i u c r i c t i y u r c a r i d c n y o r c a e m i , s rp q a , q m a u g m e u g R e R
T3: Heat exchanger inlet to the storage unit T4: Lower storage unit temperature T5: Middle storage unit temperature T6: Top storage unit temperature V1: Changeover valve for stratified loading HX: Heat exchanger
.
29
Accessories
S O L A R T E C H N I K
Accessories Quick air-bleeder for solar systems R3/8" 10 bar 160°C With ball shut-off valve
N N N N
High-Performance Air-Bleeder for solar systems R 1/2" 10 bar 180°C This automatic Quick Air-Bleeder is especially designed for operation at high temperatures and glycol liquid in solar collector systems.
N N N N
Three-way valve, motor-contr motor-controlled olled This is for changing over with storage unit loading (bottom/top, buffer/boiler) Connection: 3 x 1" outside thread Supply: 230V/50 Hz
N
N N
Utility Water Mixer For optimum premixing of the utility water temperature Protects against scalding by controlled maximum temperatures Connections: 1" outside thread Setting range: 30° C - 70° C
N N N N
Article number
Description
15000004 15000014 15000005 15001000 14100018 14100022
Quick air bleeder for solar sys ysttems R 3/8" R ½" High-performance Air-Bleeder for solar systems Three-way va vallve, motor-controlled Utility Water Mixer Compression clamp 18 mm (1 set = 4 pcs) Compression clamp 22 mm (1 set = 4 pcs)
30
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Accessories
S O L A R T E C H N I K
Flushing and Filling Station Filling and Flushing Station for solar collector systems N N
N N N N N N
N
A compact flushing and filling station A powerful centrifugal pump provides for rapid and clean filling of collector systems Built-in fine filter with sight glass Temperature-resistant hose to 60° C Handy hose rack Shut-off valve on canister drain Mounted on a sturdy, lightweight portable dolly A small particle filter before the pump makes it not only possible to filter solder and selding residue out of the collector system, but also to detect air bubbles in the line early . The canister is easy to remove for cleaning and has a large-size, lockable filling opening. On-site mixing in a clean container is possible when there is no ready-made medium available.
TECHNICAL SPECS ON PUMP: TECHNICAL Self-priming centrifugal pump Pump
Pump shaft Casing Max. delivery rate Max. pressure Motor RPM Temperature Special features
Max. dry running: 1 min. Incl. hoses for suction, pressure and flushing Incl. screwed connections Stainless steel Grey cast iron 24.2 l/min 5.9 bar 230 V, 1.7-m cable with plug 2850 min/-1 max. 60°C sustained loading Built-in fine filter with sight glass Drains on the delivery side
TECHNICAL SPECS ON DOLLY: Material Welded, sturdy, shaped frame Dimensions Without hoses: 102x46x55 cm Canister volume 30 litre Canister UV-stable PE canister
Wide opening for filling with screw cap Shut-off valve on drain
Art rtiicle number
Description
14000010
Flushing and fi fillling station
Subject to setting and printing errors.
31
Accessories
S O L A R T E C H N I K
Service Case for Fitters A PVC case with all the parts necessary to service collector systems Content:
Handheld refractometer Digital multimeter Pressure gauge Screwdriver with voltage detector pH-value checker Compass Inspection stickers and note stickers (12 of each)
N N N N N N N
Description: The handheld refractometer determines the frost-resistance of water/propylene-glycol, water/ethylene-glycol mixtures and the density of water battery acid mixtures. The measuring range is 0°-50°C for glycols. The digital multimeter can be used to measure: direct current, alternating current, direct voltage, alternating voltage, resistance, temperature, positive diode voltage drop and hFE parameters for transistors and continuity. A pressure gauge is for determining the inlet pressure on the expansion tank. The measuring range is between 0-6 bar. The phase tester can be used to quickly check whether there is pertinent voltage contacting the control system or its relevant components. The pH-value test strips allow simple determining the pH-value of the solar liquid. The compass can be used to check the exact alignment.
The inspection stickers and note stickers remind the customer of when the next servicing of its collector system is due. Only regularly serviced collector systems can function in an optimum and satisfactory fashion for years. Warranty claims require that the collector system have been serviced.
Anti-freeze Protection Analysis Instrument in PVC Case With one or two drops of test liquid, the handheld refractometer determines the frost resistance of water/propylene-glycol, water/ethylene glycol mixtures and the density of water battery acid mixtures. Range of use for measurements of:
Propylene glycol (solar, heating & cooling systems) 0° - 50° C Ethylene glycol (solar, heating & cooling systems) 0° - 50° C Battery acid (car battery) 1.15-1.30 g/chmA Windscreen water 0 to -40°C
N N N N
Complete set consists of:
1 handheld refractometer, 1 screwdriver for adjusting the 0-line 1 pipette for sampling heat transfer medium, 1 cleaning cloth, 1 PVC box, foam-lined
N N
Article number
Description
11000800 1100 0004 0400 00
Test-kit case for collector sys ysttems Hand Ha ndhe held ld Re Refr frac acto tome mete ter/ r/An Anti ti-f -fre reez ezee Pr Prot otec ecti tion on An Anal alys ysis is In Inst stru rume ment nt
32
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Accessories
S O L A R T E C H N I K
Expansion Tanks Expansion tanks for solar collector systems N N
In accordance with DIN 4757 Inlet pressure 2.5 bar
18-40 litres N N N
Suspended Galvanised steel flange Fixed nitrile membranes Article number
Litres
Design
max. bar
Dimension
Connection
15000018 15000025 15000040
18 l 25 l 40 l
Suspended Suspended Suspended
6 bar 6 bar 6 bar
290 290 320
3/4” 3/4” 3/4”
400 500 560
GEO-TEC Connection Set Optional for GEO-TEC FlowDuo and FlowUno solar pump stations, for expansion tank on solar stations 3/4", for connection to the Safety Set, armoured safety house 500 mm, wall bracket 210 mm x 250, rapid-action coupling and installation materials. Arti Ar ticl clee nu numb mber er
Desc De scri ript ptio ion n
140 4000 0000 0044
Conn Co nnec ecti tion on se sett fo forr ex expa pans nsio ionn ta tank nk,, 18 18-4 -400 li litr tres es
60-80 litres N N N
Standing High-grade steel Replaceable nitrile membranes Article number
Litres
Design
max. bar
Dimension
Connection
15000060 15000080
60 l 80 l
Standing Standing
6 bar 6 bar
380 450
3/4” 3/4”
77330 7 35 73
Service Coupler N N
Service coupler especially for solar expansion tanks 3/4" for 60- and 80-litre expansion tanks Arti Ar ticl clee nu numb mber er
Desc De scri ript ptio ion n
150 5005 0530 3022
Serv Se rvic icee co coup uple lerr fo forr 60 li litr tree ex expa pans nsio ionn ta tank nk
Subject to setting and printing errors.
33
Accessories
S O L A R T E C H N I K
Expansion Tanks 100-300 litres
Standing High-grade steel Replaceable nitrile membranes
N N N
Article number
Litres
PROCEDURE
max. bar
Dimension
Connection
15000100 15000200 15000300
100 l 200 l 300 l
Standing Standing Standing
6 bar 6 bar 6 bar
450 550 630
1” 1½” 1½”
790 1080 1177
Expansion Tanks for Heating Systems With standing design High-grade steel
N N
N N
Replaceable nitrile membranes Inlet pressure 1.5 bar
Article number
Litres
PROCEDURE
max. bar
Dimension
Connection
15200060 15200080 15200100 15200150 15200200 15200250 15200300 15200400 15200500
60 l 80 l 100 l 150 l 200 l 250 l 300 l 400 l 500 l
Standing Standing Standing Standing Standing Standing Standing Standing Standing
6 bar 6 bar 6 bar 6 bar 6 bar 6 bar 6 bar 6 bar 6 bar
380 450 450 550 550 630 630 630 780
1” 1” 1” 1½” 1½” 1½” 1½” 1½” 1½”
34
55550 7 35 73 790 800 1080 984 1177 1540 1540
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Accessories
S O L A R T E C H N I K
Heat Transfer Medium Propylene glycol Specifications: N N N N
Colour: colourless Vapour pressure at 20° C: 23 mbar Density (20° C) 104 - 106 g/cm3 No irritant effect
Characteristics: N N N N N N N N
An odourless, hygroscopic liquid Based on 1.2-pro 1.2-propylene pylene glycol Food-safe Protects through special inhibitors against corrosion, aging and encrustation Completely mixable with water No nitrite, phosphate or amine Mixes with all common commercially available antifreeze agents based on 1.2-propylene glycol Biologically degradable
Application: N N
No sustained temperatures over 170 C as this would result in aging of the antifreeze medium. Do not use with heat exchangers galvanised on the primary side.
Storage: N N
Only store in the original container. Three-year shelf life
Disposal: N
In accordance with ÖNORM S 2100
Waste key number: N
55370
Article number
Description
Container
15100030
Heat transfer concentrate of propylene glycol
10 kg
15100040 15100050
Heat transfer mixture of propylene glycol Heat transfer mixture of propylene glycol
10 kg 25 kg
Subject to setting and printing errors.
35
Solar Control Modules
S O L A R T E C H N I K
System Control Modules Pico System Controller A simple controller, the Pico impresses people with simple adjustment. With the Pico, you're guaranteed an easy overview of temperature readings and the system's operating modes. This control module has a small LCD display via which you set the maximum temperature and temperature difference. Two trimmers for adjusting maximum temperature and temperature difference (PICO Standard). With the design with an LED and LCD, the exact adjustment can be made from the outside with one button.
N
N
N
N
N
Design
PICO Standard
PICO Info
PICO Comfort
Solar scheme (1 collector, 1 storage unit) Dif ference controller scheme (reloading function) Return flow temperature booster scheme Heating DIP switch scheme Cooling DIP switch scheme Frost protection function can be connected Speed control can be connected System safeguard Circulation monitoring system, dT-criterion Sensor monitoring, interruption/shor t circuit Quantity of outputs 230 Volts Quantity of sensor inputs LED display (red-green) LCD display 11 Parameter setting Dimensions Weight Protective system Circuitr y output
X x X X X Jumper X X X 1 2 2
X x X X X Jumper X X X 1 2 2
X X DIP switch
Temperature inputs Temperature for use Article number
Description
17000010 17000008 17000009
GEO-TEC Pico Standard GEO-TEC Pico Info GEO-TEC Pico Comfor t
36
DIP switch DIP switch X X X 1 2 2
Two trimmers Button + display Button + display W = 75 mm, H = 93 mm, T = D0 mm approx 150 g IP41 1 x 230V/AC - 1A 1 x 230V/AC – 1A Speed-controlled 2 x for PT1000 0°C to –50°C
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Solar Control Modules
S O L A R T E C H N I K
Single/Double-Circuit Control Modules Temperature Difference Controller SR I/ SR II This generation of controllers is designed to optimise the output of thermal collector systems. The model SR I controlls collector systems with a maximum of one collector field and one storage unit. Model SR II can control one collector field with one storage unit, one collector field with two storage units or two collector fields with one storage unit. Functions N N
N
Monitoring of the sensors and circulation The outlet for the pump (speed-controlled, of course) can be set manually for installation or service work. Implemented safety functions: system safeguard, Collector safeguard, Recooling
Large LCD display Pictograms Items included Control system Operating instructions Instructions for getting started Fuse NO sensors or cables! Flips open and locks in position Casing The top piece is removable. Cables Plug-in flat-cable connections Installation By brackets Operation By four-button panel Standard functions of the SR 1 System safeguarding function Collector safeguarding function Manual Operation Recooling function Speed control Standard functions of the SR 2 System safeguarding function Collector safeguarding function Manual Operation Recooling function Speed control Metering of energy produced Antifreeze function Pipe-collector function 2 temperature difference controllers Reheating / thermostat function Display
Article number
Description
17000001 17000002
GEO-TEC Single-Circuit Control Module GEO-TEC Double-Circuit Control Module
Subject to setting and printing errors.
37
Solar Control Modules
S O L A R T E C H N I K
System Control Modules System Controller SR III The SR III system controller impresses people with simple operation in spite of varied control possibilities. Schemes can be selected and additional multifunction controllers freely assigned. With the SR III, up to three energy output terminals and two energy generators (collector fields) can be controlled in optimum fashion. This control system also has a data interface via which a data stick can be used to install various special purpose programmes on the controller. The controller has ten inputs for PT PT1000, three of which are optional for digital input or radiation sensors, six 230V/ AC outputs, all with RPM control. Display Items included
Casing Cables Installation Operation Standard functions
Heating circuit function
Large LCD display Selectable language Control system Operating instructions Instructions for getting started Fuse NO sensors or cables! Flips open and locks in position The top piece is removable Plug-in flat-cable connections By brackets By four-button panel Manual operation Pipe-collector function Collector safeguarding function Recooling function System safeguarding function Antifreeze function Circulation Alarm Timer Thermostat function Threshold switch Return flow temperature booster Wood-powered boiler function Temperature difference controller Radiation sensor function Pump safeguarding function Data logging Multifunction controller Metering of energy produced Anti-legionella function Triggering of mixer & pump Adjustment to forward flow temperature or room temperature Triggering of hot water supply
Art rtiikelnummer
Beschreibung
17000003
GEO-TEC Mehrkreisregelung
38
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Solar Control Modules
S O L A R T E C H N I K
Accessories Temperature Tem perature sensor Storage unit sensor: PVC 6x25 mm or 8x25 mm with 2,5 m PVC-coated cable
Can be used up to +105° C, taking the installation instructions into account. Collector sensor: PT PT1000 6x25 mm or 8x25 mm with 2.5 m silicon cable and teflonised strands
Can be used up to +250° C, taking the installation instructions into account. IMMERSION SLEEVE made of brass
112 mm long, R ½", temperature range -40° C to +200° C 112 Length immersion sleeve: 94 mm; diameter: 6 mm; material: CuZn39Pb3. Sensor connection socket
Sensor connection socket with built-in voltage surge protection Filters out a certain part of atmospheric excess voltage. The collector sensor can be extended simply and safely. Includes brackets for simple wall mounting Casing: Plastic, grey, protective system IP 65 Measurements: 80 mm x 80 mm x 50 mm Temperature Tem perature range: -25°C to t o +70°C Article number
Description
17000200 17000400 17000100 17000600 17000300 17000005
Storage unit sensor 6 mm Storage unit sensor 8 mm Collector sensor 6 mm Radiation sensor Brass immersion sleeve: 112 mm Sensor connection socket
Output Metering Module Can only be used in combination with an SR II/SR III!! N Horizontal or vertical installation N Operating pressure: to 16 bar as per DIN 2401; hot water to 90° C N Up to a Qn of 1.5 m3/h N Contact loading: 24V (without dropping resistor) N The contact maker is equipped with a 100 Ω 1/4 W protective resistor for volumetric flowmeters, 0.2 A (protective low voltage) N State-of-the-art single-jet rotary vane meter with fully dry running meter and magnetic coupling N To rule out interference by impure water, only the impeller wheel operates in the wet area. N The counter turns for easy reading. N A shielding cap that can be sealed with lead protects against magnetic influences Article number
Description
17000500 17000006 17000007
Output metering module to 1.5 m3 /h DATA STICK for SR III PC-USB inter face
Subject to setting and printing errors.
39
Storagee Uni Storag Units, ts, Buffers Buf fers & Acce Accessori ssories es
S O L A R T E C H N I K
Solar Storage Unit SSH-PU Product description: A standing storage unit made of S235JRG steel with two large-surface bare-tube heat exchangers Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated 1 1/4" protective magnesium anode to complete the cathodic corrosion protection as per Part 6 of DIN 4753 Sensor tube included Comes with thermometer (separate package) A 1 1/2" sleeve is provided as standard for retrofitting an electric heating system. Inspection opening 180 x 110 x hole diam. 150 All outside thread, flat-sealing CFC-free 50-mm PU rigid-foam insulation with casing made of lined, coloured plastic in accordance with Part 8 of DIN 4753, RAL colour silver 9006 Pressure resistance 10 bar
N N N
N N N N N N
N
Storage unit model
Volume Diameter without insulation Diameter with insulation Insulation [mm] Height with insulation Tilting height Heating surf rfaace, top/bottom Water volume, HX, top/bottom Volume flow, HX, top/bottom Water volume, HX, top/bottom
SSH-PU 200
SSH-PU 300
SSH-PU 400
SSH-PU 500
[litres] [mm] [mm] 50* [mm] [mm] [m2] [litres] [m³ /h] [mbar]
200 500* 600 50* 1232 1370 0,6 / 0,8 3,8 / 5,0 0,7 /1,2 30 / 70 1,23 / 3,6
300 500* 600 50* 1697 1800 0,8 / 1,2 5,0 / 7,5 1,0 / 1,6 35 / 90 1,8 / 8
400 600* 700 50* 1660 1800 1,0 / 1,5 6,3 / 9,4 1,2 / 2,0 45 / 120 2,1 / 11
500 650* 750 50* 1783 1970 1,2 / 1,8 7,5 / 11,3 1,4 / 2,4 55 / 250 2,5 / 14
[l/h] [°C / bar]
410 / 710 605 / 970 720 / 1180 95 / 10 95 / 10 95 / 10 160 / 25 160 / 25 160 / 25 G1 G1 G1 G¾ G¾ G¾ G¾ G¾ G¾ G 1½ G 1½ G 1½ DN 110 DN 110 DN 110 Sens Se nsoor sle leev eve, e, in inte tern rnal al di diam amet eter er 9 mm M8 Thermometer option
Rated output figure ** top/bottom as per DIN 4708
Continuous operation, top/bottom As per DIN 4708 (10/80/45) °C max. T/max. PTW max. T/max. P Heating*** [°C / bar] Cold/hot water, outside thread, (CW/HW) Cirrcu Ci cula lattio ion, n, ou outs tsid idee th thrrea eadd (c (cir irc. c.)) Heat exchangers, all outside thread (FF/RF) Electric heating, inside thread (E-heatin (E-heating) g) Nominal diameter of inspection flange (RFL)
[inches] [inc [i nche hess] [inches] [inches]
Sensoor/ Sens r/ccon ontr trooll ller er co conn nnec ecttio ions ns (F (F11, F2 F2)) Thermometer connection Dimensions
CW RF1 FF1 RF2 Z FF2 HW El. heating Weight
40
[ mm ] [ mm ] [ mm] [ mm ] [ mm ] [ mm] [ m m] [ m m] [kg]
830 / 1400 95 / 10 160 / 25 G1 G¾ G¾ G 1½ DN 110
SSH-PU SSH -PU 200 SSH SSH-PU -PU 300 SSH SSH-PU -PU 400 SSH SSH-PU -PU 500
Arti Ar ticl clee nu numb mber er
Desc De scri ript ptio ionn
110 180 630 780 880 990
110 180 580 945 1045 1215
1310020 1310 02000 1310 13 10030 03000 1310 13 10040 04000 1310 13 10050 05000
Solar St Solar Storag oragee Uni Unitt 200 l with PU ins insul. ul. Solar Sol ar St Storag oragee Uni Unitt 300 l with PU ins insul. ul. Solar Sol ar St Storag oragee Uni Unitt 400 l with PU ins insul. ul. Solar Sol ar St Storag oragee Uni Unitt 500 l with PU ins insul. ul.
705 85
770 114
127 205 635 965 1065 1261 top 770 166
128 205 685 1020 1125 1325 920 215
* Insulation not removable! ** To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. *** Only with water in the liquid state as the operating medium for the heat exchangers
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Storagee Uni Storag Units, ts, Buffers Buf fers & Acce Accessori ssories es
S O L A R T E C H N I K
Solar Storage Unit SSH-WS Product description: N N N N N N N N N N
N
A standing storage unit made of S235JRG steel with two large-surface bare-tube heat exchangers Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated 114" protective magnesium anode to complete the cathodic corrosion protection Optional with external current anode in accordance with Part 6 of DIN 4753 Temperature sensor, variably positionable by means of sensor terminal strip Comes with thermometer (separate package) A 1 1/2" sleeve is provided as standard for retrofitting an electric heating system. Inspection opening All outside thread, flat-sealing CFC-free 80-mm PU flexible foam insulation with PVC top coat, incl. floor insulation (100 mm thick) in accordance with Part 8 of DIN 4753, RAL colour silver 9006 Pressure resistance 10 bar Storage unit model
SSH-WS 750
Table of Contents Diameter without insulation Diameter with insulation Insulation Height with insulation Tilting height Heating sur face, top/bottom Water volume, HX, top/bottom Volume flow, HX, top/bottom Pressure loss, HX, top/bottom Rated output figure** top/bottom as per DIN 4708 Continuous operation, top/bottom as per DIN 4708 (10/80/45) °C max. T/max. P TW max. T/max. P heating*** Cold/hot water, outside thread, (CW/HW) Circulation, outside thread (circ.) Heat exchangers, all outside thread (FF/RF) Electric heating, inside thread (el. heating) Nominal diameter of inspection flange (RFL) Sensor/controller connections Thermometer connection
Dimensions
CW RF1 FF1 RF2 Z FF2 HW El. heating Weight
[ mm ] [ mm] [ mm ] [ mm] [ m m] [ mm ] [ mm] [ mm ] [kg]
Subject to setting and printing errors.
[litres] [mm] [mm] [mm] [mm] [mm] [m2] [litres] [m³ /h] [mbar] [l/h] [°C/bar] [°C/bar] [inches] [inches] [inches] [inches]
SSH-WS 1000
750 1000 750 900 950 1100 100 100 2082 2010 2050 2020 1,9 / 2,7 1,9 / 2,9 16,0 / 22,8 16,0 / 24,5 2,1 / 4,2 2,1 / 4,6 40 / 180 40 / 200 13 / 35 13 / 41 1220 / 2470 1220 / 2690 95 / 10 95 /10 160 / 25 160 / 25 G 1½ G 1½ G¾ G¾ G 1¼ G 1¼ G 1½ G 1½ DN 200 DN 200 Sensor terminal strip M8 Thermometer option
SSH-WS 750
SSH-WS 1000
Article number Description
157 280 967 1127 1227 1567 1855 1032 344*
180 320 947 1097 1197 1482 1760 1012 400*
13100750 Solar Storage Unit 750 l with flexible foam insul. 13101000 Solar Storage Unit 1000 l with flexible foam insul.
* Weight without insulation ** To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. *** Only with water in the liquid state as the operating medium for the heat exchangers
41
Storagee Uni Storag Units, ts, Buffers Buf fers & Acce Accessori ssories es
S O L A R T E C H N I K
High-grade Steel Storage Unit – Solar HSS Product description: For use for district heating, solar boilers, heating boilers and condensing appliance technology; with internally positioned bare-tube heat exchanger Corrosion-resistant in use with drinking water With sensor terminal strip for all common sensors Made in accordance with DIN 4753; flexible foam insulation 100 mm RAL 9006 Operating pressures allowed: drinking water = 10 bar/heating water = 25 bar; Permissible operating temperature: drinking water = 95° C/heating water = 110°C Made of 1.4571 high-grade steel
N
N
N N
N
Storage unit model
Volume Diameter without insulation Diameter with insulation Insulation Height with insulation Tilting height Heating surf rfaace, top/bottom Wat ater er vo volu lume me,, HX, to topp/b /boott ttom om Volume flow, HX, top/bottom Pressure loss, HX, top/bottom
HSS 200
HSS 300
HSS 400
HSS 500
HSS 750
[litres] [mm] [mm] [mm] [mm] [mm] [m2] [lit [l itrres es]] [m³ /h] /h] [mbar]
200 500 700 100 1410 1380 0,9/0,9 3,0/ 3, 0/3, 3,00 0,8/ 0, 8/11,6 ,655 160/580 2/ 4
300 500 700 100 1660 1625 0,9/1,4 4,77/7 4, /7,3 ,3 1,3/ 3/2, 2,58 58 40/190 3/12
400 600 800 100 1690 1670 0,9/1,8 6,2 ,2/1 /12, 2,55 1,4 ,4/2 /2,9 ,955 15/90 3/20
500 600 800 100 1960 1920 0,9/1,8 6,2/ 6, 2/112,5 1,6 ,6//3, 3,226 15/105 4/23
750 1000 750 850 950 1050 100 100 2040 2120 2015 2070 1,4/2,4 1,6/2,8 9,77/1 9, /16, 6,66 11,1/1 /199,5 2,006/ 2, 6/4, 4,001 2, 2,3/ 3/4, 4,88 35/200 50/320 10/35 14/46
[l/h]] [l/h [°C/bar] [°C/bar] [inches] [inches] [inches]
476/97 476/ 9788 95/10 95 110/25 Rp 1 Rp ¾ G1
784/1152 784/ 5222 82 820/ 0/11743 94 943/ 3/1192 9244 95/10 95/10 95/10 110/25 110/25 110/25 Rp 1 Rp 1 Rp 1 Rp ¾ Rp ¾ Rp ¾ G 1¼ G 1½ G 1½ Possible via inspection flange DN 110 Sensor terminal strip Rp ½
Rated output figure* top/bottom as per DIN 4708
Continuous operation, top/bottom As pe perr DI DIN N 47 4708 08 (1 (10/ 0/80 80/4 /45) 5) °C max. T/max. P TW max. T/max. P heating Cold/hot water, (CW/WW) Circulation (circ.) Heat exchangers, outside thread (FF/RF) Electric heating Nominal diameter of inspection flange (RFL)
Sensor/controller connections Thermometer connection
Dimensions
CW RF1 FF1 RF2 Z FF2 HW Weight
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]
[inches]
121 215/ 5/24 2413 13 95/10 110/25 Rp 1½ Rp ¾ G 1½
HSS 1000
1348/2 1348 /284 8466 95/10 110/25 Rp 1½ Rp ¾ G 1½
HSSS 200 HS HS HSSS 300 HSS 400 HSS 500 HS HSSS 750 HS HSSS 10 1000 00
Article Arti cle num number ber
Descri Des cripti ption on
65 305 605 685 765 1065 10 1145 11 75
13200200 13200300 13200400 13200500 13200750 13201000
High-grade Steel Storage Unit 200 l, 50 mm, PU insul. High-grade Steel Storage Unit 300 l, 50 mm, PU insul. High-grade Steel Storage Unit 400 l, 50 mm, PU insul. High-grade Steel Storage Unit 500 l, 50 mm, PU insul. High-grade Steel Storage Unit 750 l, 100 mm, PU insul. High-grade Steel Storage Unit 1000 l, 100 mm, PU insul.
65 305 795 870 945 1260 1375 100
70 330 890 975 1055 1325 1420 115
70 330 890 975 1110 11 1380 1670 120
80 380 940 1025 1115 11 1430 1720 185
80 395 995 1185 11 1090 10 1585 1710 210
* Um die angegebene NL–Zahl zu erreichen muss die Kesselleistung größer sein als die angegebene Dauerleistung.
42
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Storagee Uni Storag Units, ts, Buffers Buf fers & Acce Accessori ssories es
S O L A R T E C H N I K
Utility Water Storage Unit BWS Product description: N
N N
N N N
N N N
N
Standard storage unit made of S235JR steel with a large-surface bare-tube heat exchanger Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated Protective magnesium anode 1 ¼" to complete the cathodic corrosion protection in accordance with Part 6 of DIN 4753 Sensor tube included Comes with thermometer (separate package) NEW: A 1 ½" sleeve is provided as standard for retrofitting an electric heating system for all sizes Inspection opening 180 x 110 x hole diam. 150 All outside thread, flat-sealing CFC-free 50-mm PU rigid-foam insulation with casing made of lined, coloured plastic in accordance with Part 8 of DIN 4753, RAL colour silver 9006 Pressure resistance 10 bar Storage unit model
Volume Diameter without insulation Diameter with insulation Insulation [mm] Height with insulation Tilting height Heating sur face, top/bottom Water volume, HX, top/bottom Volume flow, HX, top/bottom Pressure loss, HX, top/bottom Rated output figure** top/bottom as per DIN 4708 Continuous operation, top/bottom As per DIN 4708 (10/80/45) °C max. T/max. PTW max. T/max. P Heating*** [°C / bar] Cold/hot water, outside thread, (CW/HW) Circulation, outside thread (circ.) Heat exchangers, all outside th thrread (F (FFF/RF) Electric heating, inside th thrread (E (E--heating) Nominal diameter of inspection flange (RFL) Sensor/controller connections (F1, F2) Thermometer connection
BWS 200
BWS 300
BWS 400
BWS 500
[litres] [mm] [mm] [mm] [mm] [mm] [m2] [Liter] [m³ /h] [mbar]
200 500* 600 50* 1232 1370 0,9 5,7 1,2 70 3,6
33000 500* 600 50* 1697 1800 1,2 7,5 1,6 60 8
400 600* 700 50* 1660 1750 1,5 9,4 2,0 120 11
500 650* 750 50* 1783 1970 1,8 11,3 2,4 250 14
[l/h] [°C / bar] [°C / bar] [inches] [inches] [inche hess] [inche hess]
710 970 1180 1400 95 / 10 95 / 10 95 / 10 95 / 10 160 / 25 160 / 25 160 / 25 160 / 25 G1 G1 G1 G1 G¾ G¾ G¾ G¾ G¾ G¾ G¾ G¾ G 1½ G 1½ G 1½ G 1½ DN 110 DN 110 DN 110 DN 110 Sensor sleeve, internal diameter 9 mm M8 Thermometer option
Dimensions
BWS 20 2000
BWS 300
BWS 400
BWS 500
Article Arti cle no.
Descrip Des cription tion
CW RF FF Z HW
11110 180 18 630 63 780 oben 800 73
110 180 580 1045 oben 770 94
127 205 635 1065 oben 770 151
128 205 685 1125 oben 920 195
13210200 13210200 13210300 1321 0300 13210400 1321 0400 13210500 1321 0500
Utility Water Storage Unit Unit 200 l with PU insulation Utility Water Storage Unit Unit 300 l with PU insulation Utility Water Storage Unit Unit 400 l with PU insulation Utility Water Storage Unit Unit 500 l with PU insulation
[ m m] [ m m] [ mm ] [ m m] [ mm ] El. heating [mm] Weight [kg]
* Insulation not removable! ** To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. *** Only with water in the liquid state as the operating medium for the heat exchangers
Subject to setting and printing errors.
43
Storage Tanks, Buffers and Accessories
S O L A R T E C H N I K
High-performance Storage Unit HLS Product description: A standing storage unit made of S235JR steel with a large-surface bare-tube heat exchanger Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated 1 ¼" protective magnesium anode to complete the cathodic corrosion protection Temperature sensor, variably positionable by means of sensor terminal strip Inspection opening 180 x 110 x hole diam. 150 All outside thread, flat-sealing CFC-free, 80-mm PU flexible-foam insulation with PVC top coat incl. floor insulation in accordance with Part 8 of DIN 4753, RAL colour silver 9006 Pressure resistance 10 bar
N
N
N
N N N N
N
Speicher Typ
HLS 300
Volume Diameter without insulation Diameter with insulation Insulation Height with insulation Tilting height Heating sur face, top/bottom Water volume, HX, top/bottom Volume flow, HX, top/bottom Pressure loss, HX, top/bottom Rated output figure* top/bottom as per DIN 4708 As per DIN 4708 (10/80/45) °C max. T/max. P TW max. T / max. P HZG** max. T/max. P heating Circulation (Z) Heat exchangers (FF/RF) Electric heating Nominal diameter of inspection flange (RFL) Sensor/controller connections Thermometer connection Dimensions
CW RF FF Z HW Weight
[mm] [mm] [mm] [mm] [mm] [kg]
HLS 400
[litres] 300 400 [mm] 550 600 [mm] 710 760 [mm] 80 80 [mm] 1560 1790 [mm] 1550 1780 2 [m ] 3,2 4,2 [Liter] 20,1 26,4 [m³ /h] 3,6 3,8 [mbar] 410 590 19 27 [l/h] 2100 2250 [°C / bar] 95 / 10 95 / 10 [°C / bar] 160 / 25 160 / 25 [inches] G1 G1 [inches] G ¾ IG G ¾ IG [inches] Rp 1 IG Rp 1 IG Possible via inspection flange DN 110 Sensor terminal strip M8 Thermometer option
HLS 500
500 650 810 80 1756 1760 4,6 28,9 4,0 720 35 2400 95 / 10 160 / 25 G1 G ¾ IG Rp 1 IG
HLS 300
HLS 400
HLS 500
Artikel Arti kelnr nr..
Beschr Bes chreib eibun ungg
115 210 1270 12 1000 1393 13 170
129 210 1530 906 1611 208
130 225 1470 1200 1571 235
13510200 13510200 13510300 135 10300 13510400 135 10400 13510500 135 10500
High-performance Storage Unit 200 l, 50 mm High-performance Storage Unit 300 l, 50 mm High-performance Storage Unit 400 l, 50 mm High-performance Storage Unit 500 l, 50 mm
* To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. ** Only with water in the liquid state as the operating medium for the heat exchangers
44
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Storagee Uni Storag Units, ts, Buffers Buf fers & Acce Accessori ssories es
S O L A R T E C H N I K
Buffer Storage Unit without PSD set of tubing Product description: N N N
N
N
N
Standing storage unit made of S235JR steel Inside untreated, outside with primer coat Temperature sensor, variably positionable by means of sensor terminal strip Optional flange 280 x 200 x hole diameter 245 for inspection or upgrading With finned pipe heat exchanger (PSX-F) - for extra charge, see accessories CFC-free, 80-mm PU flexible-foam insulation with PVC top coat incl. floor insulation in accordance with Part 8 of DIN 4753, from 800 litres with 100-mm thickness, RAL colour silver 800 Pressure resistance 3 bar
Storage Unit Model PSX / PSX-F
500
800
1000
Volume [litres] Diameter without insulation [mm] Diameter with insulation [mm] Insulation [mm] Height with insulation [mm] Tilting height [mm] max. T / max. P heating [°C / bar] Loading/unloading connections (A1-A4) [inches] Electric heating: only PSX-F Nominal diameter of inspection flange (RFL): only PSX-F Sensor/controller connections Thermometer connection Air bleed [inches]
500 650 810 81 50 1700 17 1710
800 790 990 100 1802 1780
110000 790 990 100 2202 2180
Dimensions
500
800
1000
1500
2000
3000
245 350 645 1045 1405 95
246 351 646 1046 1446 143*
246 351 786 1326 1866 150*
320 425 786 1253 1720 211*
365 470 905 1445 1985 270*
375 480 1475 2265 3055 348*
A1 RFL A2 A3 A4 Weight
[mm] [mm] [mm] [mm] [mm] [kg]
Article number
Description
13400500 13400800 13401000 13401500 13402000 13403000
Buff ffeer Sto tora ragge Unit, 500 l with insulation Buff ffeer Sto tora ragge Unit, 800 l with insulation Buff ffeer Sto tora ragge Unit, 1000 l wit ithh insulat atiion Buff ffeer Sto tora ragge Unit, 1500 l with insulation Buff ffeer Sto tora ragge Unit, 2000 l with insulation Buff ffeer Sto tora ragge Unit, 3000 l with insulation
1500
2000
3000
1500 2000 1000 1100 1200 1300 100 10 100 10 2130 2410 2150 2450 95 / 3 Rp 1½ Sensor terminal strip DN 200 Sensor terminal strip M8 Thermometer option Rp 1¼
3000 1150 1350 100 3160 3170
* Weight without insulation
Subject to setting and printing errors.
45
Storage Tanks, Buffers and Accessories
S O L A R T E C H N I K
Combination/Buffer Storage Unit KSW-D Product description: The Combination/Buffer Storage Unit is equipped with an integrated high-grade steel tube heat exchanger without circulation**** It is used chiefly in solar collector systems and heating systems. A buffer storage unit made of high-quality steel S235JR; inside: untreated; outside: primer-coated Pressure resistance of buffer storage unit: 3 bar Two large-surface bare-tube heat exchangers CFC-free flexible foam insulation with PVC top coat, RAL colour silver 9006 Temperature sensor, variably positionable by means of sensor terminal strip From 800 l, 1 ½" sleeve shifted by 30° for optional el. heating (RCN 65 - 4 kW ) at height of connection piece A5 All outside thread, flat-sealing
N
N N N N N N N N
Combination/Buffer Storage Unit KSW
Volume of Buf fer Storage Unit Diameter without insulation Diameter with insulation Insulation [mm] Height Tilting height Heating surf rfaace, HX corr rruugated tube KSW Water volume, HX corrugated tube KSW Rated output figure* as per DIN 4708 KSW 10-min. peak tapping quantity KSW With temperature of standby volume temp.** 52° C 10-min. peak tapping quantity KSW With temperature of standby volume temp.** 65° C 10-min. peak tapping quantity KSW With storage unit temp.*** 65° C max. T / max. P HW heating max. T / max. P Buf fer Storage Unit max. ∆ p storage unit/hot water corrugated tube Cold/hot water, outside thread Heat exchanger (FF/RF) all outside thread Loading/unloading connections (A2-A5) outside thread Loading/unloading connections (A1+A6) outside thread Electric heating (E-HTG) inside thread Sensor/controller connection
450
650
800
900
1050
1300
[litres] [ mm ] [ mm ]
450 600 800
650 700 900
800 790 990
1050 900 1100
1300 900 1100
[ m m] [ mm ] [m2] [litres]
1960 2000 20
1970 2005
2020 2060
2000 2050
2430 2470 24
1,7
2,2
2,5
900 790 990 100 2190 2230 5 27 2,9
3,4
3,6
[litres]
105
125
154
160
175
200
[litres]
145
170
210
230
270
340
[litres] [°C / bar] [°C / bar] [bar] [inches] [inches] [inches] [inc [i nche hes] s] [inches]
182
250
324
G¾ G1 G1 G 1¼ –
G¾ G1 G1 G 1¼ –
364 390 110 / 16 95 / 3 6 G¾ G¾ G¾ G1 G1 G1 G1 G1 G1 G 1¼ G 1¼ G 1¼ Rp 1½ Rp 1 ½ Rp 1 ½ Sensor terminal strip
420
G¾ G1 G1 G 1¼ Rp 1 ½
* To achieve the rated output figure cited, the boiler output has to ** Standby volume between connections A5 und A6; continuous operation operation ***Standby volume between connections A1 und A6; continuous operation **** With KSW circulation is possible via T-piece in the CW inlet.
46
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Storagee Uni Storag Units, ts, Buffers Buf fers & Acce Accessori ssories es
S O L A R T E C H N I K
Combination/Buffer Storage Unit KSW-D
Combination/Buffer Storage Unit KSW Dimensions
A1 RL1 (only Models 1 & 2) A2 VL1 (only Models 1 & 2) RL2 (only Model 2) A3 A4 VL2 (only Model 2) A5 ELECTRIC HEATING A6 Weight, KSW
[ m m] [ m m] [ m m] [ mm ] [ m m] [ m m] [ m m] [ mm ] [ m m] [ m m] [ m m] [kg]
450
650
800
900
1050
1300
105 195 495 595 695 795 995 1095 1195 – 1715 193 19
110 200 500 600 700 800 1000 1100 1200 – 1720 218
125 225 540 645 745 850 1060 1165 1265 12 1265 1745 17 268
125 225 570 685 785 900 1130 11 1245 1 360 13 1360 1930 283
110 210 525 630 730 835 1045 1150 1250 1250 1730 316
110 210 600 730 830 960 1220 1350 1470 1470 2150 348
Article number
Description
135 351104 0450 50 135 351106 0650 50 135 351108 0800 00 135 351109 0900 00 135 3511105 0500 135 351113 1300 00
Combin Comb inat atio ionn Sto tora rage ge Un Unit it,, 45 4500 l wi with th ut util ilit ityy wa wate terr he heat at ex exch chan ange gerr Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 65 6500 l wi with th ut util ilit ityy wa wate terr he heat at ex exch chan ange gerr Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 80 8000 l wi with th ut util ilit ityy wa wate terr he heat at ex exch chan ange gerr Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 90 9000 l wi with th ut util ilit ityy wa wate terr he heat at ex exch chan ange gerr Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 105 0500 l wi with th ut util ilit ityy wa wate terr he heat at ex exch chan ange gerr Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 13 1300 00 l wi with th ut util ilit ityy wa wate terr he heat at ex exch chan ange gerr
Subject to setting and printing errors.
47
Storage Tanks, Buffers and Accessories
S O L A R T E C H N I K
Combination/Buffer Storage Unit KSE-D Product description: This storage unit with an integrated utility water storage unit can be used as a combination storage unit. An integrated utility water storage unit 200 litres in volume is with enamelling in accordance with Part 3 of DIN 4753, with Mg protective anode. It is used predominantly in solar collector systems and heating systems. A buffer storage unit made of high-quality steel S235JR; inside: untreated; outside: primer-coated Pressure resistance of buffer storage unit of 3 bar/utility water storage unit 10 bar Two large-surface bare-tube heat exchangers CFC-free flexible foam insulation with PVC top coat, RAL colour silver 9006 Temperature sensor, variably positionable by means of sensor terminal strip The utility water storage unit is equipped with a circulation connection and a cleaning flange as standard. From 800 l, 1 ½" sleeve shifted by 30° for optional el. heating (RCN 65 - 4 kW )at height of connection piece A5 All outside thread, flat-sealing
N N
N N N N N N N N N
The KSE Combination Storage Unit [lit itrres es]] Volume of Combination Storage Unit (HTG/HW) [l
Diameter without insulation Diameter with insulation Insulation Height Tilting height Heating sur face, top/bottom Water volume, HX, top/bottom Rated output figure* as per DIN 4708, KSE max. T/max. PTW (KSE) max. T / max. P HW heating max. T / max. P Buf fer Storage Unit Cold/hot water, outside thread Circulation (Circ.) outside th thrread Heat exchanger (FF/RF) all outside thread Loading/unloading connections (A2-A5) outside thread Loading/unloading connections (A1+A6) outside thread Electric heating (el. heating) inside thread Sensor/controller connections
[ mm ] [ m m] [ mm ] [ m m] [ mm ] [m2] [Liter] [°C / bar] [°C / bar] [°C / bar] [inches] [innches] [i [inches] [inches] [inc [i nche hes] s] [inches] [in
250/200 450/200 600 600/200
250/20 250/ 2000 600 800
450/2 450 /200 00 700 900
1960 2000 1,6 9,6 1,3
119970 2005 2 12 1,8
G¾ G¾ G1 G1 G 1¼ –
G¾ G¾ G1 G1 G 1¼ –
700/200 850/200 1100/200
600/20 600/ 2000 70 700/ 0/20 2000 790 790 990 990 100 2020 2190 21 2060 2230 2,4 2,6 14,5 15,7 2,1 2,5 95 / 10 110 / 16 95 / 3 G¾ G¾ G¾ G¾ G1 G1 G1 G1 G 1¼ G 1¼ Rp 1½ Rp 1½ Sensor terminal strip
850 50/2 /200 00 1100 00//20 2000 900 900 1100 1100 220000 2050 2,9 17,5 3
2430 2470 3,3 20 3,2
G¾ G¾ G1 G1 G 1¼ Rp 1½
G¾ G¾ G1 G1 G 1¼ Rp 1 ½
* To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified. ** Standby volume between connections A5 und A6; continuous operation [l/h] = 10 min. peak tapping quantity x 6 at boiler output > continuous operation *** Standby volume between connections A1 und A6; continuous operation [l/h] = 10 min. peak tapping quantity x 6 at boiler output > continuous operation
48
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Storage Tanks, Buffers and Accessories
S O L A R T E C H N I K
Combination/Buffer Storage Unit KSE-D
The KSE Comb mbiinati tioon Storag agee Unit Dimensions
A1 RL1 (only Models 1 & 2) A2 VL1 (only Models 1 & 2) RL2 (only Model 2) A3 A4 VL2 (only Model 2) A5 ELECTRIC HEATING A6 Weight of KSE
250/200
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]
105 195 495 595 695 795 995 1095 1195 – 1715 244
450/200
110 200 500 600 700 800 1000 1100 1200 – 1720 269
600/200
125 225 540 645 745 850 1060 10 1165 1265 12 1265 1745 17 319
700/200
125 225 570 685 785 900 1130 11 1245 1360 13 1360 1930 334
Article number
Article number
135 3500 0045 4500 135 3500 0065 6500 135 3500 0080 8000 135 3500 0090 9000 135 3500105 0500 135 350013 1300 00
Combin Comb inat atio ionn Sto tora rage ge Un Unit it,, 45 4500 l wi with th 20 2000-ll ut util ilit ityy wa wate terr st stor orag agee un unit it Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 65 6500 l wi with th 20 2000-ll ut util ilit ityy wa wate terr st stor orag agee un unit it Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 80 8000 l wi with th 20 2000-ll ut util ilit ityy wa wate terr st stor orag agee un unit it Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 90 9000 l wi with th 20 2000-ll ut util ilit ityy wa wate terr st stor orag agee un unit it Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 105 0500 l wi with th 20 2000-ll ut util ilit ityy wa wate terr st stor orag agee un unit it Comb Co mbin inat atio ionn Sto tora rage ge Un Unit it,, 13 1300 00 l wi with th 20 2000-ll ut util ilit ityy wa wate terr st stor orag agee un unit it
Subject to setting and printing errors.
850/200
110 210 525 630 730 835 1045 10 1150 1250 12 1250 1730 17 367
1100/200
110 210 600 730 830 960 1220 1350 1470 14 1470 2150 21 399
49
Storagee Uni Storag Units, ts, Buffers Buf fers & Acce Accessori ssories es
S O L A R T E C H N I K
Buffer Storage Unit with set of tubing PSD-R Product description: A standing storage unit made of S235JR steel with a large-surface bare-tube heat exchanger Inside untreated, outside with primer coat Temperature sensor, variably positionable by means of sensor terminal strip CFC-free, 80-mm PU flexible-foam insulation with PVC top coat incl. floor insulation in accordance with Part 8 of DIN 4753, RAL colour silver 800 thickness, RAL colour silver 9006 Pressure resistance 3 bar
N
N N
N
N
Storage unit model
Table of Contents Diameter without insulation Diameter with insulation Insulation Height with insulation Tilting height Heating sur face Water volume, HX max. T / max. P storage unit max. T / max. P GWT Heat exchanger outside thread (FF/RF) Load Lo adin ing/ g/un unlo load adin ingg co conn nnec ecti tion onss (A (A11-A4 A4)) Electric heating Inspection flange (RFL) Sensor/controller connections Thermometer connection Air bleed Dimensions
A1, RF A2 FF A3 A4 Weight (without insulation)
[mm] [mm] [mm] [mm] [mm] [kg]
PSD-R PS D-R 50 500 0
PSD-R PSD -R 80 800 0
[litres] [ m m] [ mm ] [ mm] [ mm ] [ m m] [m2] [Liter] [°C / bar] [°C / bar] [inches] [inc [i nche hes] s]
500 650 810 80 1700 1710 2,5 15,7 95 / 3 110 / 16 G1 Rp 1½
[inches]
Rp 1¼
800 1000 1500 790 790 1000 990 990 1200 100 100 10 100 1802 2202 2130 1780 2180 2150 2,5 3,2 4,25 15,7 20,1 26,7 95 / 3 95 / 3 95 / 3 110 / 16 110 / 16 110 / 16 G1 G1 G1 Rp 1 ½ Rp 1½ Rp 1 ½ This is not possible. – Sensor terminal strip – Rp 1 ¼ Rp 1¼ Rp 1 ¼
2000 1100 1300 100 2410 2450 4,25 26,7 95 / 3 110 / 16 G1 Rp 1 ½
Rp 1 ¼
PSDPS D-R R 500
PSDPS D-R R 80 800 0
PSDPS D-R R 100 000 0
PSDPS D-R R 150 500 0
PSDPS D-R R 200 000 0
245 645 870 1045 10 1405 14 120
246 646 816 1046 1446 183
246 786 946 1326 1866 202
320 786 1020 1253 1720 281
365 905 1065 1445 1985 350
Arti Ar ticl clee nu numb mber er
Arti Ar ticcle nu numb mber er De Desc scri ript ptio ion n
137 370005 0500 00 137 370008 0800 00 137 3700100 0000 137 3700150 5000 137 370020 2000 00
Buffer Buff er Sto tora ragge Uni nitt, 50 5000 l wi with th in insu sula lattio ionn & se sett of tub ubin ingg Buff Bu ffer er Sto tora ragge Uni nitt, 80 8000 l wi with th in insu sula lattio ionn & se sett of tub ubin ingg Buff Bu ffer er Sto tora ragge Uni nitt, 100 0000 l wi with th in inssul ulat atio ionn & se sett of tub ubin ingg Buff Bu ffer er Sto tora ragge Uni nitt, 150 5000 l wi with th in insu sula lati tion on & set of tu tubi bing ng Buff Bu ffer er Sto tora ragge Uni nitt, 20 2000 00 l wi with th in insu sula lattio ionn & se sett of tub ubin ingg
50
PSD-R PS D-R 100 000 0 PS PSD-R D-R 150 500 0 PSD PSD-R -R 20 2000 00
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Storage Units and Heat Exchangers
S O L A R T E C H N I K
Accessories List for Storage Units Built-in electric heating systems for vitreous enamelled storage units N
N N N N N N
Built-in electric heating systems designed with insulation especially for use in vitreously enamelled solar and utility-water storage units as supplementary or emergency heating, for horizontal installation. Simple installation provided by 1½" threaded head with outside thread. Temperature is preselected by a thermostat with a setting range of 30°-75° C. Temperature-limiting safety switch 95° C Comes with operating instructions and circuit diagram. For installation in a blind flange, be sure to also order a blind flange with sleeve in sizes that fit. Casing: plastic
Note: The electric connection may only be made by authorised and qualified personnel in accordance
with VDE regulations and ordinances by the PUCs (public utility companies). This must also be complied with in cases of malfunctions and repairs. Combinations with CrNi boilers are not advisable. Output [kW]
Voltage [V]
Depth [mm]
3,0
230/400
(390)375
Article number
Description
13000504
Electric Heating Element EHP30 3000W/230V/375 mm
Output [kW]
Voltage [V]
Depth [mm]
3,0 3,75 4,5 6,0
400 400 400 400
390 550 500 550
Article number
Description
13000502 13000510 13000503 13000501
Electric Heating Element EHP30 3000 W / 400 V / 390 mm Electric Heating Element EHP37 3750 W / 400 V / 320 mm Electric Heating Element EHP45 4500 W / 400 V / 500 mm Electric Heating Element EHP60 6000 W / 400 V / 550 mm
Built-in electric heating systems for combination storage units (From volume of 800 l in total volume) N
1½“ outside thread, controller 30°-80° C, STP fixed 110° C Outp Ou tput ut [k [kW] W]
Vol olta tage ge [V [V]]
Inst In stal alla lati tion on de dept pth h [m [mm] m]
4,0 4,0
400 230
275 275
Arti Ar ticl clee nu numb mber er
Desc De scri ript ptio ion n
130005 1300 0508 08 1300 13 0005 0509 09
Electr Elec tric ic He Heat atin ingg Sys Syste tem m fo forr Co Comb mbin inat atio ionn St Stor orag agee Un Unit it 40 4000 00 W/ W/40 4000 V/ V/27 2755 mm Elec El ectr tric ic He Heat atin ingg Sys Syste tem m fo forr Co Comb mbin inat atio ionn St Stor orag agee Un Unit it 40 4000 00 W/ W/23 2300 V/ V/27 2755 mm
Subject to setting and printing errors.
51
S O L A R T E C H N I K
Gelötete Soldered
Plate-type Heat Exchangers Plattenwärmetauscher
52
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Plate-type Heat Exchangers
N N N N N N N N
S O L A R T E C H N I K
Maintenance-free A pressure- and temperature-resistant, lightweight heat exchanger Short response times for temperature changes (on account of small volumes) Minimum soiling factor due to optimised embossed pattern for the plate Self-cleaning Optimised design for every application Low space requirement/kW-out requirement/kW-output put 100% exploitation of materials
Model
Output [kW]
Collector area m2
Pressure loss kPa
B25T*10 B25T*20 B25T*30 B25T*40
– 7,2 – 7,8 – 19,8 – 20,4 – 34,2 – 34,8 – 49,2
bis 12 13 – 33 34 – 57 58 – 82
5/5 10/8 13/10 15/12
Article number
Description
190 9000 000012 190 9000 000013 190 9000 000014 190 9000 000015 190 9000 000016
PlatePlat e-ty type pe He Heat at Ex Exch chan angger B25 25** 10 wi with th in inssul ulat atio ionn Plat Pl atee-ty type pe He Heat at Ex Exch chan angger B25 25** 20 wi with th in insu sula lattio ionn Plat Pl atee-ty type pe He Heat at Ex Exch chan angger B25 25** 30 wi with th in insu sula lattio ionn Plat Pl atee-ty type pe He Heat at Ex Exch chan angger B25 25** 40 wi with th in insu sula lattio ionn Plat Pl atee-ty type pe He Heat at Ex Exch chan angger B25 25** 50 wi with th in insu sula lattio ionn
Note: You get the best efficiency through our customised design (calculation) of the heat exchanger FREE OF CHARGE. CHARGE .
Subject to setting and printing errors.
53
Tubing and insulating systems
S O L A R T E C H N I K
Flexible Solar Tubing Systems Product description: GEO-TEC Thermoflex Solar Tubing Systems consist of two
tubes glued to one another, and insulated high-grade steel corrugated tubes. The insulation and sheathing are high-temperatureresistant and available in customised lengths. Simple separation of the twin tubes without damaging the protective foil or the insulation enable problem-free tubing of the solar collector system. The Easy Drill Screw-Connection Kit allows very simple screwed connections of the high-grade steel corrugated tube to the lines and fittings. The GEO-TEC Thermoflex tubing systems are provided with a black, tear-resistant outer sheathing. Available in lengths of: 10 m, 15 m, 20 m or 25 m. Customised lengths are possible up to 100 m, and will be supplied on request.
Thermoflex EWK double Highly flexible high-grade steel corrugated tube With integrated sensor cable With high-temperature India rubber to +150° C, and for Bending radii: DN 16 and DN 20 = 0.15 m, DN 25 = Insulation thickness: 13 mm Available on request: Insulation thickness: 19 mm
N N N N N N
The tubes are rolled in bundles, EWK to DN 20 in 800 x 800 cardboard box, EWK DN 25 shrink-wrapped on pallets. Comes with: As standard, four Screw Connection Kits with outside thread and one oval clamp fastening set comes packed with each EWK bundle.
Table with dimensions: DN
L x B cm
DN 16 DN 20 DN 25
122 x 60 134 x 66 148 x 73
Arti Ar ticl clee nu numb mber er
Desc De scri ript ptio ion n
DN16: 12001 12 00100 0011 12001 12 001002 002 12001 12 001003 003
High-grade High-g rade ste steel el corr corruga ugated ted tub tube/r e/rubb ubber er-in -insul sulate ated, d, 2xD 2xDN1 N166-13 13 mm, by the met metre re High-g Hig h-grade rade stee steell corr corruga ugated ted tub tube/r e/rubb ubber er-in -insul sulate ated, d, 2xD 2xDN1 N166-13 13 mm, 10 10-m -m bun bundle dle High-g Hig h-grade rade stee steell corr corruga ugated ted tub tube/r e/rubb ubber er-in -insul sulate ated, d, 2xD 2xDN1 N166-13 13 mm, 2525-m m bun bundle dle
DN20: 12002 12 002000 000 12002 12 002002 002 12002 12 002003 003
High-grade High-g rade stee steell corr corruga ugated ted tub tube/r e/rubb ubber er-in -insul sulate ated, d, 2xD 2xDN20 N20--13 mm, by the met metre re High-g Hig h-grade rade stee steell corr corruga ugated ted tub tube/r e/rubb ubber er-in -insul sulate ated, d, 2xD 2xDN20 N20--13 mm, 10 10-m -m bun bundle dle High-g Hig h-grade rade stee steell corr corruga ugated ted tub tube/r e/rubb ubber er-in -insul sulate ated, d, 2xD 2xDN20 N20--13 mm, 2525-m m bun bundle dle
DN25: 12002 12 00200 0011 12002 12 002004 004 12002 12 002005 005
High-grade High-g rade stee steell corr corruga ugated ted tub tube/r e/rubb ubber er-in -insul sulate ated, d, 2xD 2xDN25 N25--13 mm, by the met metre re High-g Hig h-grade rade stee steell cor corrug rugate atedd tub tube/r e/rubb ubber er-in -insul sulate ated, d, 2xD 2xDN25 N25--13 mm, 10 10-m -m bun bundle dle High-g Hig h-grade rade stee steell cor corrug rugate atedd tub tube/r e/rubb ubber er-in -insul sulate ated, d, 2xD 2xDN25 N25--13 mm, 2525-m m bun bundle dle
54
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Tubing and insulating systems
S O L A R T E C H N I K
Flexible Solar Tubing Systems Thermoflex EW N N N N N N
High-grade steel corrugated tube with low corrugation height Resistant to rust, acid, heat and vibration Very good flexibility and compression strength Simple design with detachable screwed connections Available in bundles up to 100 m Short lengths are promptly available from warehouse. Article nu.
Description
Dimension (inches)
Lengths
12000002 12000003 12000004 12000005
High-grade steel corrugated tube, DN 16 by the metre High-grade steel corrugated tube, DN 16 25 m, bundle High-grade steel corrugated tube, DN 16 50 m, bundle High-grade steel corrugated tube, DN 16 100 m, bundle
1/2 1/2 1/2 1/2
By the metre 25 50 100
12200001 122000011 122000012 122000013
High-grade steel corrugated tube, DN 20 by the metre High-grade steel corrugated tube, DN 20 25 m, bundle High-grade steel corrugated tube, DN 20 50 m, bundle High-grade steel corrugated tube, DN 20 100 m, bundle
3/4 1/2 1/2 1/2
Meterware 25 50 100
12200002 122000014 122000015 122000016
High-grade steel corrugated tube, DN 25 by the metre High-grade steel corrugated tube, DN 25 25 m, bundle High-grade steel corrugated tube, DN 25 50 m, bundle High-grade steel corrugated tube, DN 25 100 m, bundle
1 1/2 1/2 1/2
Meterware 25 50 100
Easy Drill Screw-Connection Kit
Available as Screw-Connection Kit with outside thread, with solder end or as a coupling set Consists of: N 1 coupling nut N 1 spacer ring N 1 Easy Drill washer N 1 special-purpose seal N 1 screw-in part with broad sealing surface Article number
Description
Coupling nut (inches)
11000116 11000120 11000013
Screw-Connection Kit with outer thread DN 16 Screw-Connection Kit with outer thread DN 20 Screw-Connection Kit with outer thread DN 25
3/4 1 1 1/4
1/2 Zoll 3/4 Zoll 1 Z ol l
11000024 11000025 11000026
Screw-Connection Kit with solder-end DN 16 Screw-Connection Kit with solder-end DN 20 Screw-Connection Kit with solder-end DN 25
3/4 1 1 1/4
18 mm 22 mm 28 mm
11016012 11020034 11000030
Screw-Connection Kit, Coupling Set DN 16 Screw-Connection Kit, Coupling Set DN 20 Screw-Connection Kit, Coupling Set DN 25
3/4 1 1 1/4
3/4 Zoll 1 Zoll 1 1/4 Zoll
Subject to setting and printing errors.
Outer thread red.
55
Tubing and insulating systems
S O L A R T E C H N I K
Flexible Solar Tubing Systems Protective hose for outdoor areas UV-resistant, weather- and raptor-pro r aptor-proof of Thickness: 1.5 mm Black Form of delivery: rolled in 10-m bundles Slit on one side for easy installation Maximum service temperature 135° C Elongation at tear 400 - 600%
N N N N N N N
Article number
Description
133 33000121
Prot otec ecttiv ivee ho hose se fo forr ou outd tdooor ar area eas, s, un univ iver erssal ally ly sp spli litt
Thermoflex EW for Underground Installation Two highly flexible high-grade steel corrugated tubes For house connections, distribution lines & connecting lines Insulation: rock wool , 0.037 W/mK, temperature-resistant to 250°C Sheathing tube: flexible corrugated PE-HD sheathing tube Integrated sensor cable, 4 x 0.5 mm ² Fixed lengths according to reques
N N N N N N
Article number
Description
1100 0002 02116 1100 0002 0220 20 1100 001122 2255
High-g High -gra rade de st stee eell co corr rrug ugat ated ed tu tube be fo forr un unde derg rgro roun undd in insta stall llat atio ion, n, DN 16 High Hi gh-g -gra rade de st stee eell co corr rrug ugat ated ed tu tube be fo forr un unde derg rgro roun undd in insta stall llat atio ion, n, DN 20 High Hi gh-g -gra rade de st stee eell co corr rrug ugat ated ed tu tube be fo forr un unde derg rgro roun undd in insta stall llat atio ion, n, DN 25
Plastic Cap for Thermoflex EW Sturdy plastic cap for a twin tubes with a hole lead-through for the sensor cable drawn in. Colour: white For both indoor and outdoor use.
N
N N
Article number
Description
11000234 11000233 11000231
End Cap AUST STRROFL FLEX EX EW SOLA LARR A 160 DN 2x16 End Cap AUSTROFLEX EW SOLA LARR A 160 DN 2x20 End Cap AUSTROFLEX EW SOLA LARR A 160 DN 2x25
56
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
S O L A R T E C H N I K
Subject to setting and printing errors.
57
Stoves
S O L A R T E C H N I K
Chopped Wood Stoves The GEO-TEC B 16-11 Stove is used in detached houses, properties of a similar size and as a single housing-unit stove. It impresses people with its timeless design and is also an eye-catcher. The visible flames it provides for in a sitting room convey a special room atmosphere. The GEO-TEC B 16-11 16-11 Stove has total output of 16kW, which is distributed to 11 kW in the water-bearing components and 5 kW on the air side.
Solar collectors
Solare Solar heating Heizungsuntersupport stützung Hot water RoomRaumheizung heating system
Kaltwasser Cold water
Bio 16-11
Stove door Combustion chamber Casing Ash container Fire box Fuel Total rated output Heating water output Air space output Exhaust gas temperature at rated output Water volume of the heat exchanger Max. operating pressure Fuel consumption at rated output Minimum chimney draught Minimum chimney size Weight Height/Width/Depth
With movable panel that prevents smoke from escaping while wood is being added. Lined all around with special, chemically bonded fireclay bricks Solid, welded boilerplate Thickness: 3-5 mm Volume: 13.5 litres Volume: 80 litres Wood to 20% moisture or wood briquettes 16 kW 11 kW 5 kW Approx 250° C 7.5 litres 3 bar 4.9 kg/h 15 Pa. 250 cm 220 kg 1030/570/510 mm
Article number
Description
700100 700101
Woodburning Stove B 16/11 Regumat RTA
58
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Stoves
S O L A R T E C H N I K
Pellet Stove Saturn S7 The Saturn S7 impresses people with its optimum combination of a pellet boiler and a pellet stove. High-quality materials and very modern technology guarantee high performance and lasting reliability. Professional commissioning must be carried out to use the stove in optimum fashion. Only a valid commissioning certificate guarantees warranty claims. Total heat output, max. Total heat output, min. Output at max. Output at min. Flue gas outlet temperature temperature at max. Flue gas outlet temperature temperature at min. CO 13% O2 at min. and at max. CO2 at min. and at max. Exhaust gas mass at min. and at max. Minimum exhaust at max. output Minimum exhaust at min. output Capacity of the pellet container Pellet type Pellet consumption consumption per hour Autonomy Autono my of operation Room heating capacity m3 Admission of combustion air Flue gas outlet Maximum current consumpt consumption ion Mains voltage and frequency Net weight Gross weight
7.5 kW / 6450 kcal/h 2.1 kW / 1806 kcal/h 84.2% (>80%) 82.7% (>80%) 170° C 120° C 0.056 - 0.026 % 3.7 % - 5,6 % 4.2 - 9.5 g/sec 0.12 mbar – 12 Pa 0.10 mbar – 10 Pa 52 l Pellets with 6-8 mm Ø, pellet size 5/30 mm Min. -0.6 kg/h* max.- kg/h* -1.7 kg/h* At min. - 28 h* at max. 10 h* 160/40 – 185/25 – 215/30** Outer diameter 50 mm Outer diameter 80 mm 270 watt 220 volts/50 Hz 112 kg 122 kg
Black
* These values may fluctuate depending on type and size of the pellets used. ** Room heating capacity depending on requirement Kal/m 3
Silver
Article number
Description
700300 700301 700302
Pellet Stove SATURN, Black Pellet Stove SATURN, Bordeaux red Pellet Stove SATURN, Silver
Subject to setting and printing errors.
Bordeauxred
59
Stoves
S O L A R T E C H N I K
Pellet Stoves, Hydro N21-18 The GEO-TEC N 21-18 impresses people with its optimum combination of a pellet boiler and a pellet stove. High-quality materials and very modern technology guarantee high performance and lasting reliability. An integrated water jacket makes it possible to also operate a heating system with the N 21-18. The heating output can be regulated from 5.4 to 21.5 kW, with efficiency of over 90%. 21.5 kW (18.490 kcal) / 16.2 kW (13.932 kcal)*** 6.2 kW (5.332 kcal) / 3.7 kW (3.182 kcal/h)*** 92 % (> 90%)
Total heat output, max. Total heat output, min. Output: at max.
Admission of combustion air
93 % (> 90%) 250° C 100° C 0.055 - 0.018% 5.5% - 11.9% 7.3 - 13 g/sec 0.12 mbar - 12 Pa 0.10 mbar - 10 Pa 52 l Pellets with 6 mm Ø pellet size 5/30 mm Min.-1 kg/h* max.-4 kg/h* At min.-33 h* at max. 9 h* 185/40 - 215/35 - 250/30** Ø 50 mm
Flue gas outlet
Ø 80 mm
Maximum current consumption
270 watt 220 volts / 50 Hz 125 kg 135 kg
Output: at min. Flue gas outlet temperature at max. Flue gas outlet temperature at min. CO 13% O2 at min. and at max. CO2 at min. and at max. Exhaust gas mass at min. and at max. Minimum exhaust at max. output Minimum exhaust at min. output Capacity of the pellet container Pellet type Pellet consumption per hour Autonomy of operation Room heating capacity m3
Mains voltage and frequency Net weight Gross weight
Bordeauxred
* These values may fluctuate depending on type and size of the pellets used. ** In Italy only pellets with a diameter of 6 mm may be used. *** Calorific values of 5180 Kcal/kg
Deser t
Article number
Description
700200 700201 700202 700203
Pellet Stove HYDRO, Bordeaux red Pellet Stove HYDRO, Black Pellet Stove HYDRO, Desert Pellet Stove HYDRO, Salt & Pepper
60
Black
Salt & Pepper
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Stoves
S O L A R T E C H N I K
Solar Active GEA Pellet Stoves The Pellet Stove SOLAR ACTIVE is the optimum modern-age stove with ACTIVE system for automatic air adjustment system, depending on the pellet type. Key data: Weight: 120 kg, fire tube connection: diameter 80 mm
Silver Total heat output, max. Total heat output, min. Output at max. Output at min. Flue gas outlet temperature at max. Flue gas outlet temperature at min. CO 13% O2 at min. and at max. CO2 at min. and at max. Exhaust gas mass at min. and at max. Minimum exhaust at max. output Minimum exhaust at min. output Capacity of the pellet container Pellet type Pellet consumption per hour Autonomy of operation Room heating capacity m3 Admission of combustion air Flue gas outlet Maximum current consumption Mains voltage and frequency Net weight Gross weight
8,7 kw / 7482 kcal/h 2,6 kw / 21,50 kcal/h 87,9 % (> 85%) 90,7 % (> 85%) 92°C 168°C 0.042 – 0.017 % 4,5 % – 8 % 4 – 7,7 g/sec 0,12 mbar – 12 Pa 0,10 mbar – 10 Pa 28 litres Pellets with 6 mm ø pellet size 5/30 mm Min. - 0,6 kg/h* kg/h* max. - 2 kg/h* kg/h* At min.-28h h* At max. 9 h* 187/40 – 214/35 – 250/30** Outer diameter 50 mm Outer diameter 80 mm 270 watt 220 volts/50 Hz 120 kg 140 kg
Article number
Description
700500 700501 700502
Pellet Stove Solar ACTIVE GEA Black Pellet Stove Solar ACTIVE GEA Bordeaux red Pellet Stove Solar ACTIVE GEA Silver
Subject to setting and printing errors.
Bordeauxred
Black
Remote control with integrated thermostat
* These values may fluctuate depending on type and size of the ** Room heating capacity depending on requirement Kal/m 3
61
Trade Fair and Promotional Items
S O L A R T E C H N I K
Aluminium and High-grade Steel Collectors PVC Kit with mini-collector/fastening materials PVC kit with: N 1 Mini-collector 210 x 31 3100 mm N High-grade steel or aluminium model or N Installation materials
Article number
Description
11000500 11000600 11000700
Mini-collector, aluminium Mini-collector high-grade steel Installation materials
Collector Cross-Section Model for Trade Fairs The internal workings of the collector are visible in part. This collector is only a display piece and thus not operational.
Titanium absorbers
Article number
Description
77002003 500900
Cross-section model, aluminium Cross-section model, high-grade steel
62
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Solar Set
S O L A R T E C H N I K
We will put your Solar Set together for utility water heating support and/or heating support, doing so according to your particular requests.
Subject to setting and printing errors.
63
General Terms of Business
S O L A R T E C H N I K
of GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau
Our Terms and Conditions of Business below apply to all price quotes, contracts, deliveries and other performance. Any conditions by a Client differing from these, also including mere additional conditions, which we have not expressly approved in writing, shall be excluded, even if we have not expressly opposed such in the individual case.
1. Price quotes and acceptance of orders Our price quotations are subject to confirmation. Orders as well as any changes to orders placed with us shall be binding for the Buyer in all cases,, irrespective cases irrespective of wheth whether er they are direct or via our sales representatives in the field. Orders and changes placed with us shall only become binding on our written confirmation of the order.
2. Prices All prices are ex works and, unless something else is agreed, are in without turnover tax (VAT), which shall be charged at the respective valid rate. All prices are current prices. For orders without an express price agreement, the prices for the day of delivery shall apply. We are entitled to make appropriate price increases if, after quoting a price, changes occur in the prices of raw materials or supplies, wages, salaries, freight or other public charges. Cash discounts, discounts and time allowed for payment shall require special agreement.
3. Delivery, passing of risk, shipping & packaging Deliveries are carried out ex our warehouse. Unless otherwise agreed in writing, shipping is carried out chargeable to and at the risk of the ordering party. Our deliveries shall be considered as carried out upon transfer to the Buyer, the haulage company or haulage contractor, or when notification is made of readiness for dispatch. Our deliveries are subject to correct deliveries on schedule by our front-end suppliers. Freight Frei ght costs as well as the costs of any insura insurance nce for shipping that might be requested by the Buyer shall be chargeable to the Buyer. The execution of any special loading or shipping rules set by Buyers shall be carried out at the Buyer’s risk and expense. We shall be entitled to carry out partial performance to a reasonable extent. If in our opinion packaging is required, it shall be carried out in the manner usual in the trade always at the Buyer’s expense.
4. Time periods for and dates of delivery 1. Delivery dates specified should only be considered as approximate. Any agreement of fixed deadlines shall require our express confirmation to be effective. When a fixed deadline had been agreed, then the time period for delivery shall begin with the date of acceptance of the order, but not before complete clarification of all the details for its execution. If the Buyer is obliged to obtain any documents, specifications, permits or clearances, or to furnish a down payment, then the time period for delivery shall not begin until such obligations have been met. 2. If we are not able to deliver within the contractually agreed period of time, then, having set a grace period for us in writing of at least 14 days that threa threatens tens refusal, refusal, the Buyer may withdraw from the
64
contract subject to the provision provision in Para. 3. The Client shall shall only be entitled to claims for compensation in cases of damages due to delay or non-performance if the delivery has been delayed due to gross fault on the part of the contractor, a properly constituted agent or one of our managing salaried employees. 3. Any unforeseen circumstances, for which we are not responsible, such as force majeure, war, uprisings, lock-ins or lock-outs, strikes and lock-outs, difficulties procuring materials, operational interruptions, energy shortages, lack of means of transport and similar circumstances (also if such occur at front-end suppliers’) shall extend the delivery period commensurately, this being by at least the duration of the hindrance if such hinders us from meeting our commitments mitme nts on time. If it is fores foreseeabl eeablee that a delay in delivery will last longer than two months, then both parties shall be entitled to withdraw. Buyers may not derive any claims for damages from an extension of the time period for delivery, even in cases of withdrawal. We shall also not be responsible for the aforementioned circumstances if they develop during a delay already existing. In important cases, we will notify ordering parties as soon as possible about the start and end of such hindrances.
5. Payment 1. Unless otherwise agreed, our invoices are due and payable strictly net within 14 days as of the invoice date without any deductions. Before old invoices already due and payable from earlier deliveries are paid, no deductions will be granted on new invoices. 2. Bills of exchange will only be accepted with a relevant agreement and even then (as also with cheques) only on account of performance. Discount charges and other costs shall be borne by the drawee and must be immediately reimbursed. We shall not be liable for timely su submi bmissi ssion on,, pr prote otests sts,, etc etc.. Wh What at is mor more, e, ac accep ceptin tingg a bil billl of ex excha chang ngee shall not extend the term of payment of the purchase price. 3. From the time when due and payable on, 1% in interest after due date will be charged per month begun. If this clause should be ineffective, interest after due date is agreed in the amount of 10 % p.A. 4. In case of default on payment, we charge banking debit interest unless the Client proves that our damages are lower than this flat rate. At least the agreed interest after due date, however, shall be owed also after the default occurs. The assertion of claims for damages caused by default that are actually higher shall not be ruled out. 5. If the Client goes into default on payment or acceptance, all outstanding invoices shall immediately immediately become due and payable. In case of non-compliance with payment obligations within the scope of the business relations or in case of a proven deterioration in the Client’s financial position, we shall be entitled to make any further work on the order as well as its delivery dependent on reasonable security or cash in advance. If our products have already been delivered, then we may demand immediate payment of the entire amount remaining regardless of the terms of payment agreed. This shall also apply if it should later emerge that the financial position had been substantially worse when the contract was concluded than we had assumed. If the security or advance payment are not provided within a reasonable time limit to be set by us, we shall be entitled to withdraw.
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
General Terms of Business
S O L A R T E C H N I K
of GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau
6. The assertion of rights of lien or retention and set-offs against counterclaims shall be inadmissible unless the counterclaims have been legally established or accepted by us. 7. Payments shall always be credited to the oldest outstanding invoice or account receivable. The Buyer will be charged with any expenses arising in connection with bank transfers or based on documentary collection and documentary credit for our deliveries in the Buyer’s country or the country of destination.
terioration of assets is applied for or proceedings for such are instituted, we may furthermore demand that the Client: notify us both of the receivables assigned and of their debtor; provide all the information required to collect the receivables; hand over the pertinent documents and inform the debtors about the assignment. The Client furthermore authorises us already now for such a case as this to inform the buyers about the assignment of future claim. 6. We shall be under obligation to release our choice of the items of security given to us on demand by the Buyer if their value exceeds the receivables still existing vis-à-vis the Client by more than 20%.
6. Reservation of title 1. All merchandise and products we deliver are delivered only under reservation of title and extended reservation of title. The merchandise shall remain our property until full payment is made (in cases of payment by cheques and/or bills of exchange, until they are cashed) for all debts arising from the business relations, including accessory claims and claims for damages. This shall also apply if all or individual claims of ours are included in a current account, and the balance has been drawn and accepted. If a payment is made by a cheque/bill-of-exchange transaction (acceptor’s bill), the property shall not be transferred until the bill has been cashed without reservation. 2. The Client may neither pledge nor assign by way of security reserved merchandise (i.e. also merchandise that is still in our co-ownership after being connected, mixed or processed according to the following conditions). 3. If important contractual contractual obligations obligations are violate violated, d, in particular in case of default of payment, then, after a dunning procedure, we shall be entitled to take back the merchandise, the Buyer being under obligation to surrender such. Unless the Statute Covering Instalment Sales is applied, our taking back or seizing merchandise shall only imply withdrawal from the contrac contractt if we expre expressly ssly declare this in writing. If, in case of default of payment, we exercise our right to take back merchandise and take back merchandise delivered under reservation of title, a credit for this shall only be made in the amount of 50% of the purchase price set off. The difference shall be for covering our expenses, such as freight costs, new marketing costs, packaging costs, etc. The Client shall retain the right to furnish proof of less damage. 4. The Client must immediately inform us about seizures or any other impending adverse effect on our rights by third parties, stating the details of the circumstances that enable intervention. 5. The Buyer shall be entitled to process or resell the reserved merchandise in the course of orderly business. The Client’s receivables arising from reselling the reserved merchandise are already now assigned to us as security for all of our claims arising from the business ne ss rel relati ation. on. We acc accept ept thi thiss ass assign ignme ment. nt. If the re reser serve vedd merchandise is sold with third-party merchandise either in a processed or unprocessed condition, the receivables shall only be considered as assigned in the amount of the invoice value of the reserved merchandise delivered by us. The Client shall be authorised to collect the receivables assigned, doing so for us in a fiduciary capacity. This authorisation to collect may be revoked if the Buyer does not properly fulfil its payment obligations arising from the contract on which they are based. If: payment is suspended; bankruptcy, composition proceedings in or out of court or any other de-
Subject to setting and printing errors.
7. Taking back merchandise In case merchandise is taken back that is subject to special agreements, no claim shall exist to the purchase price being paid back, but rather only to the delivery of replacement merchandise.
8. Make-and-hold orders Unless otherwise agreed for make-and-hold order, the merchandise must be completely called one year at the latest after being ordered. When one year is up we shall be entitled to charge for the merchandise, demanding its immediate payment. We shall furthermore be entitled to charge for the storage costs according to the rates in the haulage industry. The current price valid applicable on the date of delivery shall apply for make-and-hold orders.
9. Notices of defects, warranty & liability 1. The merchandise we deliver must be inspected on arrival without delay for proper quality, quality, specific performance and comple completeness teness.. Complaints must be made in writing. In cases of discernable defects, we must receive objections immediately after receipt of the merchandise. Defects which cannot be established with a proper commercial inspection must be asserted in writing within a time limit of three months after the ordering party receives the merchandise, with the right of recourse for defects being lost. We shall not take responsibility either for material defects caused by unsuited or improper storage, transport or manipulation, uses, incorrect installation or commissioning by the customer or third parties, tie s, usu usual al we wear ar,, fau faulty lty or ne negli gligen gentt ha handl ndling ing or for an anyy consequences of improper alterations or repair work carried out by the customer or third parties without our consent. The same shall apply to defects that reduce the value or suitability of the merchandise only to an insignificant degree. We must in any event be given opportunity to ascertain defects given notification of. Merchandise objected to must be sent back to us immediately on request. Claims arising from defects shall be lost if t he customer does not fulfil these obligations or, without our approval, carries out alterations to merchandise already objected to. 2. In case of material defects, only reworking or replacements may be demanded. If reworking and/or replacement should fail, t he Client shall be entitled to demand a lowering of the purchase price (reduction) or cancellation of the purchase contract (nullification of the sale).
65
General Terms of Business
S O L A R T E C H N I K
of GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau
3. Regardless of for what reason, we shall only be liable for grossly culpable behaviour by the Contractor itself, our executive bodies or our management employees. Any liability for slight negligence and all fault of vicarious agents shall be excluded. If there is some liability under our conditions, the t he compensation for damages may not exceed the loss incurred and the profit not realised, which the party having violated the contract, allowing for circumstances that it knew about or should have known about when the contract was concluded. 4. In cases of functional defects on collectors, for five years as of the issue date of the invoice from GEO-TEC we offer (free of charge ex works) replacement for materials which demonstrably have not met one of the requirements of the standard EN 12975. A function guarantee shall only be granted on collectors if all the main components of the collecto collectorr system (fastenin (fasteningg materials, pumping unit, frost protection, expansion tank, storage unit, control system and metal cladding) are from GEO - TEC and verification is furnished both of installation in technically correct fashion (in accordance with the state of the art) and regular maintenanc maintenancee by qualified personnel personnel (maintenance contract with a specialised company licensed to do so). A ten-year guarantee shall be granted for systems in Austria if all the main components of the collector system (fastening materials, pumping unit, frost protection, expansion tank, stor age unit, control system and metal cladding) are from GEO - TEC and verification is furnished both of installation in technically correct fashion (in acc accord ordan ance ce wit withh the state of the art) an andd reg regula ularr maintenance by qualified personnel (maintenance contract with a specialised company licensed to do so). Any liability shall, however, be ruled out for damage due to mechanical strain or changes resulting from influences caused by weather. Slight colour deviations or spoiling of the surface which have no influence on the collector’s functioning shall also be excluded from the warranty. What is more, no guarantee shall be assumed for glass breakage. Liability shall be excluded for damage due to force majeure and malfunctions attributable to improper assembly or installation of our products. No liability shall be assumed for any consequential damage due to defects.
5. If, after unsuccessful subsequent performance, the customer wants to withdraw from the contract due to a defect of title or material defect, it shall not be entitled to any claims for damages besides this due to the defect. If, after unsuccessful subsequent performance, the customer wants compensation for damages, the merchandise shall remain with the customer if this can be reasonably expected of it. The compensation for damages shall be limited to the difference between the purchase price and the value of the defective thing. This shall not apply if we have fraudulently caused the breach of contract. For individuals in business, the warranty is one year as of delivery of the merchandise. This shall not apply if the customer does not notify us about the defect in good time. Only the manufacturer’s product description is agreed as always defining the qualities of the merchandise. No public statements, recommendations or advertising by the manufacturer (for the product and/or individual components components of it) shall constitute any additional contractual specifications of the qualities of the merchandise. merchandise. If a customer is given defective installation instructions, we shall only be under obligation to deliver defect-free installation instructions, but only if the defect in the installation instructions stands in the way of proper installation. If a delivery of products made by us cannot be made by the date agreed due to reasons for which we are not responsible, then parts already manufactured shall, at the Buyer’s expense and risk, be set aside in storage space that is roofed over and guarded. In such case, the warranty shall begin when the merchandise is put into storage. As payment for this storage of manufactured merchandise, we charge 1% of the total order amount for each month of storage begun. These storage costs shall b e due and payable at the end of each month of storage. stor age. In cases of simple and slight negligence, damage claims against us shall be limited to the value of the contract. The guarantees we make only apply vis-à-vis individuals in business. In case of any transferral of the guarantee there might be, a consumer should be expressly informed about this.
10. Partial inoperativeness
The preconditions for liability by GEO-TEC Solartechnik GmbH are that:
In any individual clauses of these conditions should be or become inoperative, the remaining agreements shall nonetheless remain operative.
• The installation was carried out according to the installation instructions in the respective valid version using the pertinent installation materials from the GEO-TEC organisation.
11. Place of fulfilment and legal venue
• The assembly was carried out by an authorised specialised company (heating engineer or fitter). • GEO-TEC and/or its representatives have been provided the opportunity to inspect complaints on site immediately after any such defects arise. • There is certif ication of proper commissioning commissioning (properly filled-in acceptance certificate). • An annual examination and maintenance has been carried out by a specialised company licensed to do so. The warranties set up by GEO-TEC shall only apply vis-à-vis contracted companies, and respective parties to a contract shall be under obligation both to inform end users of this fact and, on request, to confirm such in writing.
66
Only the court for A-9800 Spittal/Drau Spitt al/Drau shall be competent competent for all present and future claims arising from the business relations with merchants who has been entered as a merchant in the commercial register, including claims based on bills of exchange and cheques. It is understood that Austrian law shall apply. The same legal venue shall apply if: the Client does not have a general legal venue domestically; it moves its residence or habitual residence abroad after concluding the contract; or its residence or habitual residence abroad is not known at the time an action is filed.
Status date: 1 January 2007
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Solar Collector Systems
S O L A R T E C H N I K
ALU 450 Q, Audi Plant 2005
Subject to setting and printing errors.
67
Trade Fair ISH 2007
68
S O L A R T E C H N I K
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Trade Fair ISH 2007
Subject to setting and printing errors.
S O L A R T E C H N I K
69
Absorber
S O L A R T E C H N I K
Titanium absorbers
Your partner for highly selective coatings In 1995 TiNOX GmbH was the first company to introduce to the market the newly developed, highly selective absorber coating for solar thermal collectors. This patented "blue" coating based on titanium and quartz set new performance standards and also provided an initial environmentally friendly alternative to the black chrome and black nickel coatings primarily in use back then. The TiNOX® titanium absorber coating is vaporised onto metal tape in a physical vacuum depositing (PVD) method, which it developed itself. Using an electron beam, titanium and quartz are vaporised in a vacuum chamber, which then react with nitrogen and oxygen to form TiNOX (titanium nitride oxide) and precipitate on the metal tape. The TiNOX® titanium absorber layer is abrasion-proof and can be processed into full-surface absorber panels and fins using all common joining methods (laser welding, plasma welding, ultrasound welding, soft soldering and reshaping). Its unique coat structure makes TiNOX® a highly selective absorber that has the following properties: N A high degree of absorption (low reflection) within the visible light range 95% absorption N
A low degree of emission (high reflection) within the thermal radiation range 5 % emission
Maximum efficiency for solar thermal collectors 70
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Absorber
S O L A R T E C H N I K
Coating structure The base material used is a metal substrate with good reflection and thermal conduction. A thin titanium carbide compound is used as an adhesion layer and diffusion barrier. The absorber coating consists of a titanium compound with oxygen and nitrogen. This patented titanium oxynitride compound gave TiNOX its name. There is also an additional anti-reflex coating and protective coating made of quartz glass on the absorber layer. This minimisation of the surface reflection further optimises the absorption of solar radiation.
Nature and the Environment The components of the TiNOX coating are entirely safe for the human organism and the environment. TiNOX absorber coating is 100% recyclable. The metal in the absorber is entirely reusable.
Certified Performance and Long-term Stability The outstanding properties of TiNOX are confirmed by test certificates from independent testing institutes, which applies to the optical parameters of the absorption coefficient α and emission coefficient ε as well as the temperatureresistance and climate stability. Guarantee of the performance stability of TiNOX absorbers:
To test the performance stability of selective absorber coatings, a testing method was developed in co-operation with various renowned research institutes. The so-called "Task X" Test (ISO draft proposal CD 12 952.2) simulates the influences of temperature and the environment which affect the selective coatings over many years of operation for the collector. The Task X Test guarantees at least 95% of the efficiency factor in new condition after a simulated period of use of 25 years.
The Original Blue is made of Titanium. Subject to setting and printing errors.
71
Notes
72
S O L A R T E C H N I K
Geo-Tec Solartechnik GmbH • Villacherstraß Villacherstraßee 95 • 9800 Spittal/Drau • Phone : +43 (0) 4762/61 399-0 • Fax: ext. 90 90 • E-Mail: office@geo
[email protected] tec.at • www.geotec.at
Let’s use the sun…
for th the e
…
future of our
children!
S O L A R T E C H N I K
VILLACHERSTRASSE 95
•
A - 9 8 0 0 S P I T T A L / D RA RA U
Phone : +43 (0) 4762/61 4762/61 399-0 • Fax: ext. 90 • E-Mail:
[email protected] [email protected] • www.geotec.at
