GEM WS Tutorial

March 2, 2017 | Author: holaclaude | Category: N/A
Share Embed Donate


Short Description

Download GEM WS Tutorial...

Description

Gem Workstation Tutorial Manual Written By Carol Watkins Christeen Russell Illustrations & Edited By Dave Williams Published By GemWorkS Europe © 1993, GemWorkS Europe

46 Hampton Close, Herne Bay, KENT CT6 8BZ. ENGLAND Telephone: +44 (0)227 742790 Fascimile: +44 (0)227 742791 CompuServe CIS: 100136, 3365

Page 3

Copyright This manual & accompanying software is copyrighted and all rights reserved. No part of this publication may be copied, transmitted, translated or stored in a retrieval system or reproduced in any way, including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from the publishers, with the exception of material entered and executed for the reader's own use.

Warranty A limited 7 day warranty is provided which covers the physical disk and printed materials, from the date of purchase or from the date of your receipt of package. Full replacement of defective disk(s) or printed material will apply on receipt of your full details, name and address, a dated proof of purchase - such as a copy of your receipt or invoice. If replacing a defective disk, you must also send us the diskette with an explanation of the problem. If replacing printed materials, you only need to send a photocopy of the bad page (or pages) with the error clearly annotated. If the entire manual is defective, please send us your manual. All risk for loss or damage of any returned materials while in transit remains with the purchaser. Technical support for this product is available on +44 (0227) 742790 between 19.00 and 21.30 hours BST or GMT most weekday evenings. The software that accompanies this publication is supplied 'as is' without any warranty of any kind with exception to the 7 day limited warranty, either expressed or implied. Neither the producers, publishers or GemWorkS Europe nor it's employees, distributors or dealers will be liable for any financial or other loss arising directly or indirectly from the use or misuse of this product. Every care has been taken in the writing and presentation of this publication. However, no responsibility is assumed by the authors or publishers for any errors or omissions contained herein or any consequential loss suffered therefrom.

Page 4

Table Of Contents Preface WS Workstation Control Panel:-

9 WS1 WS2 Keyboard WS2 MIDI Module WS400

PART ONE:

10 11 12 13

CONTROL LOCATIONS

LCD Display Alpha Dial Voices Globals Internal Styles Programme Styles Song Patterns Chain Compose REC (Record) Play Tracks Track Tempo Full Globals Common Chords

14 14 14 14 15 15 15 15 16 16 16 16 16

Manual Controls:-

Start/Stop Fill In Sync/Continue Intro/End Pitch / Modulation Ball

16 17 17 17 17

Edit Keypad:-

Esc, Ent Master (Volume Control)

17 18

Global:-

Section Type Section Detune Section Transposer Dynamic/Norm Inv Pedals Assignment Pitch Ball Assign Change Global Name

18 19 19 19 20 20 20

Voice:-

Timbre ADSSR Modulation 21 Skew Special

21 21

Mixer Effect 1 Effect 2

21 22 22 23 23

Page 5

Status:-

Keyboard Tuning Volume Pedal Assign Common Chord (Pedal/Board) Pedal Switch Logic Restore Orig Blocks

Splits Midi Disk

24 24 24 25 25 25 26 26

Additional Features:-

Demos / Memory Puff

PART TWO:

LESSON 1

27

DISK PROCEDURES

28

Loading an .ALL file Formatting a disk Saving an .ALL file Directory function

28 29 29 30

PART THREE:

LESSON 2

COPYING AND EDITING STYLES, GLOBALS AND VOICES

31

Copying an internal style with its global to a programme style

31

Editing your copied style:Changing the Volumes of a track Selecting a different voice on a track

32 32 32

Changing effects of your copied style Transposing a track

32 32

Internal Styles only Programme Styles/Song Patterns Using Track Tempo function

33 33 33 34

Using Play Tracks function

34 34

Reprogramming tempo:-

Muting autoplay track:-

Muting a track of a Song Pattern Changing globals whilst playing a style Assigning a split and layering sounds

Editing and Programming Voices:-

36 Saving a voice file Editing a voice ADSSR Programming Modulation/Skew

Page 6

34 35 35

36 36 37 38

Saving your edits to disk as a voice file

39

Programmable Drumkit:-

40 41 41

Accessing edit functions of drumkit Editing the drumkit Saving your edits to disk Programmable Drumkit Instrument Chart PART FOUR:

43 43

LESSON 3

USING THE SEQUENCER

44

Single track recording:Overdub Recording another track Clearing a track Naming your song Playing back your song

44 45 45 45 45 46

Recording a song pattern using internal styles 46 Recording a song pattern using programme styles PART FIVE:

47

LESSON 4

WRITING A PROGRAMME STYLE

48

Copying parts from the internal styles:Copying an intro Copying a major Copying a minor Copying a seventh Copying a fill Copying an ending

48 48 48 49 49 49 50

Naming your programme style Changing the global of your new style

50 51

Copying parts of a programme style:Copying all parts Clearing a track Erasing a note

51 51 51 52

Track by track recording:-

53 53

Quantising a track Quantize section PART SIX:

54 LESSON 5

CHAIN COMPOSE

55

Writing a chain compose Jukebox

56 57

Page 7

PART SEVEN:

LESSONS 6, 7 & 8

LESSON - TRANSPOSING A SONG

58

LESSON - CHECKING THE MEMORY OF THE KEYBOARD

58

LESSON - MIDI

59

PART EIGHT: EDITOR’S NOTE

62

VOICES IN ALPHABETICAL ORDER

63

PERCUSSION INSTRUMENT LOCATION

64

VOICE EDIT WORKSHEET

65

GLOBAL EDIT WORKSHEET

66

PROGRAM STYLES EDIT WORKSHEET

67

SONG PATTERN/CHAIN COMPOSE EDIT WORKSHEET

68

Page 8

Preface This Tutorial Guide is designed to help you work through the many features available on the WS, by providing a step by step guide with working examples. It is recommended that you study the CONTROL LOCATIONS section first, then work through each lesson, practising each new technique until you are familiar with it before moving on to the next. A working “WS TUTORIAL DISK” has been included with this Tutorial Guide, together with a blank 3.5" DD disk, which you will format and then use to make a back-up copy of your “TUTORIAL DISK” and then save your working examples (files) to.

FILES ON THE TUTORIAL DISK .ALL files:-

LESSON1 LESSON2 LESSON3 LESSON4

Where you see [....] this denotes a button to be pressed. Where you see keyboard.

LCD

this is a prompt for you to look at the LCD display on the

NOTE: This WS TUTORIAL was written using GEM WS2 with V1.10 upgrade, complete with disk drive. The illustrations & Graphics used in this tutorial have been taken from the WS2/ WS400 LCD display and may appear different to those on the WS1.

Thanks! Special thanks to Carol & Christeen who burnt many a midnight oil over the word processor whilst composing this manual and also to Chris Lambert for his keen eye and proof reading talents. Dave Williams

Page 9

WS1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

MIDI Ports (In, Out & Through) Contrast (control for alphanumeric LCD Display) Optional Pedal Sockets (P1, P2 & Damper) Option Bass Pedalboard Socket Option Volume/Expression Pedal Socket Stereo Audio Input Jack Sockets (In Left & Right) Stereo Audio Output Jack Sockets (Out Left & Right) Power On/Off Switch and IEC Mains Socket Manual Controls (Start/Stop, Intro/End, Sync/Continue, Fill In) Headphone Socket Pitch & Modulation Ball Edit Section Voice Section Sequencer Section Alpha Dial Full Global, Lower & Upper Section Alphanumeric Liquid Crystal Display (LCD) - Backlit Internal & Programmable Styles, Song Pattern Section. Sequencer Controls (Internal & Programmable Styles, Song Pattern, Chain Compose, Record) Internal Loudspeakers Disk Drive

Page 10

WS2 K/Board 1 2 3 4 5 6 7 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

MIDI Sockets MIDI Through or MIDI Out Function Selector LCD Display Contrast Optional Pedal Sockets (P1, P2 & Damper) Option Bass Pedalboard Socket Option Volume/Expression Pedal Socket Stereo Audio Input Jack Sockets (In Left & Right) Stereo Audio Output Jack Sockets (Out Left & Right) Power On/Off Switch and IEC Mains Socket Internal Loudspeakers Sequencer Controls Style, Song Pattern Selection Buttons Liquid Crystal Display (LCD) - Backlit Polyphonic Section (A, B, C, D & E) Sequencer Sections Tempo Display Alpha Dial Global Section Voice Selection Buttons Edit Section Manual Controls (Start/Stop, Intro/End, Sync/Continue, Fill In) Headphone Socket Pitch & Modulation Ball Percussion Instrument Keys (5 Drumkits) Disk Drive

Page 11

WS2 Module 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MIDI Sockets (In, Out & Through) Contrast Pedal Sockets (P1, P2 & Damper) Volume Pedal Socket Headphone Socket Stereo/Mono Audio Output Sockets (Left, Right & Mono) Mains On/Off Switch IEC Mains Input Socket Tempo Display Liquid Crystal Display (LCD) - Backlit Edit Section Voice & Style/Song Pattern Selection Buttons Sequencer Controls Polyphonic Section (A, B, C, D & E) Manual Controls (Start/Stop, Intro/End, Sync/Continue, Fill In) Voice / Pattern Button (Used to switch 32 buttons between Voice/Style selection) RECord Button Alpha Dial Global Section Disk Drive

Page 12

WS400 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

IEC Mains Input Socket MIDI Sockets (In, Out & Through) MIDI Through or MIDI Our Function Selector LCD Display Contrast Optional Pedal Sockets (P1. P2 & Damper) Optional Bass Pedalboard Socket Optional Volume/Expression Peal Socket Stereo Audio Output & Input Sockets Loudspeaker Sockets Loudspeakers Sequencer Controls Style, Song Pattern Selection Buttons Liquid Crystal Display (LCD) - Backlit Polyphonic Sections (A, B, C, D & E) Sequencer Sections Tempo Display Alpha Dial Global Section Voice Section Edit Section Manual Controls (Start/Stop, Intro/End, Sync/Continue, Fill In) Headphone Socket Pitch / Modulation Ball Percussion Instrument Keys (5 Drumkits) Disk Drive Mains Power On/Off Switch

Page 13

Part One THE LCD DISPLAY (liquid crystal display) - Tells you the state of play at all times and will display information depending on the buttons pressed within control panel area. Here is an example of [Internal Style] [Bossa] Style No./Name

96Bossa DRUMS

A

Global No./Name

GLOBAL_96 A.BASS

Bossa

JAZZGTR

B

C

STRINGS FLUTE

D

E

[A],[B],[C],[D],[E] BUTTONS - Act as multi-function buttons, track names, five separate sound expanders, each with access to 128 editable voices.

? DIAL

THE ALPHA DIAL - This dial is used to control all the functions of the workstation, e.g. tempo, voices and edit changes etc.,.

VOICES - 32 voices can be immediately accessed by pressing buttons from [GRAND P] to [DRUMS]. A further 96 hidden voices can be accessed by holding down [? DIAL] in the voice section and dialling the alpha dial. GRANDP

?

GLOBAL 7 4 1 0

8 5 2

9 6 3 +

DIAL DRUMS

GLOBALS - allows you to store 128 registration settings [00] to[127] using numbered buttons [0] to [9] in the GLOBAL section. The [-Page] and [+Page] buttons are used for scrolling through the globals (note: they are also used in other sections for paging up or down). A registration setting stores voices, effects, volume levels, panning, transposition, keyboard polyphony/mono, detuning, dynamics, pedal 1-3 assignments, pitch/modulation, keyboard split points, midi data. The global numbers are sub-divided into 4 groups of 32 as follows:[00 [32 [64 [96

- 31] - 63] - 95] - 127]

are are are are

accessed accessed accessed accessed

by pressing the numerical buttons via the [Song Pattern] via the [Prog. Styles] via the [Internal Styles]

INTERNAL STYLES - There are 32 Internal Styles - known as factory presets - which Page 14

can be accessed by pressing [INT STYLES] and then pressing one of rhythm styles buttons [BOSSA] to [COUNTRY]. * Note: as you do this you will see in the LCD display that the style number/name and global number/name will change. BOSSA

PROGRAMME STYLES - There are 32 Programme Styles - which can be loaded, via the disk drive, from pre-recorded disks either written by GEM, the User Group Library or by yourself. To play a Programme Style, press [PROG STYLES] and then press one of the rhythm style buttons [BOSSA] to [COUNTRY]. * Note: as you do this you will see in the LCD display that the style number/name and global number/name will change.

BOSSA

SONG PATTERNS - There are 32 Song Patterns - which are whole songs / parts of a song, loaded via the disk drive from pre-recorded disks (as above). These can be played by pressing [SONG PATT.] or [CHAIN COMPOSE] and then pressing one of the rhythm style buttons [BOSSA] to [COUNTRY]. * Note: as you do this you will see in the LCD display that the style number/name and global number/name will change.

32

63

CHAIN COMPOSE - is a function which allows the chaining together and playback of (a) songs, or (b) parts of a song to form a complete song. There are four chains available which are selected by using one of the buttons A,B,C, or D.

32empty

GLOBAL_32

free

Chain1

Chain2

Chain3

Chain4

JukeBox

A

B

C

D

E

REC (Record) This control enables the recording of the following functions: PROG. STYLES, SONG PATT., CHAIN COMPOSE, TRACK TEMPO, COMM. INT STYLES

PROG STYLES

SONG PATT.

Page 15

CHAIN COMPOSE

REC

CHORDS.

INT STYLES

PLAY TRACKS -

PROG STYLES

SONG PATT.

CHAIN COMPOSE

This allows you to turn ON or OFF:

REC

(a)

the automatic accompaniment on tracks A,B,C,D,or E, on Internal and Prog. Styles

(b)

song tracks A,B,C,D, or E

Turning OFF a track allows you to play along if you wish. TRACK TEMPO - Turning OFF this function overrides the automatic tempo of a SONG or STYLE. The tempo of all SONGS or STYLES will now remain at this setting. Turning the ALPHA DIAL will increase/decrease the TEMPO. FULL GLOBAL By turning OFF this function, the voice on any unlit track will remain the same on all selected SONGs or STYLES. COMMON CHORDS - This function can only be used in the SONG PATT recording mode. It allows the automatic accompaniment of an INTERNAL or PROG.STYLE to be used, including INTRO, FILL, ENDING, when recording a SONG.

MANUAL CONTROLS

PLAY TRACKS

TRACK TEMPO

FULL GLOBAL

COMM. CHORDS

START STOP FILL INTRO IN END SYNC CONT. MODULATION

START/STOP

PITCH DOWN

PITCH UP

MODULATION

Pressing this button will start the drums of an INTERNAL or PROG. STYLE. Then holding down a chord in the lower octave of the keyboard, will start playing the automatic accompaniment. This button is also used to START/STOP playback & record of a SONG. FILL IN Pressing this button, whilst a STYLE is playing, will play a musical part/drum break. Page 16

It can also be pressed when playing back a SONG which has been recorded using the COMMON CHORD function. SYNC/CONTINUE By pressing this button, and then holding down a chord in the lower octave of the keyboard when playing a STYLE, the full accompaniment ie all tracks, will be activated. When selecting playback of a SONG you can pause the SONG by pressing START/ STOP button, then press SYNC/CONTINUE to continue playing from the exact point it was paused. INTRO/END Note: some PROG. STYLES do not have an INTRO/ END / FILL included in the STYLE.

This control plays an introduction and ending accompaniment to a selected STYLE. By holding down a chord in the lower octave of the keyboard, and then pressing INTRO/END, an INTRO will play. Pressing this button again while the STYLE is playing will give an ENDING. PITCH/MODULATION BALL With this control you can add GLISSATO (PITCH) and VIBRATO (MODULATION) effects to the voices on selected tracks.

EDIT KEYPAD BUTTONS - allow you to perform many editing functions. The keypad buttons you will use the most are the [ESC] and [ENT] buttons.

EDIT MASTER

GLOBAL

VOICE

MIXER

EFF 1

EFF 2

STATUS

SPLITS

MIDI

DISK

ESC

ENT

[ESC] (Escape) button Returns you to the orginial LCD display after you have made changes. [ENT] (Enter) button Saves any data or parameter changes you have made. Think of it as a “YES” button. [MASTER] - (VOLUME CONTROL) By pressing this button and following these simple directions you can adjust the overall volume of the keyboard:Page 17

NOTE: The original volume of the keyboard can be restored ie when you first purchased the keyboard, by performing the MEMORY PUFF function. See page 27 MEMORY PUFF

NOTE: when the overall VOL control is almost at maximum level, you are advised not to exceed +04dB on the LOW bass tones.

EDIT

Press

[MASTER],

Read

LCD display

The “Vol” will be flashing. The volume can be increased/decreased by dialling the Alpha Dial. You can add Bass and Treble to your volume, as follows:Press

[C] (low=bass)

Dial

ALPHA DIAL

Press

[E] (hi=treble)

Dial

ALPHA DIAL

Increase = Clockwise Decrease = Anti-Clockwise

Increase = Clockwise Decrease = Anti-Clockwise

When you are happy with the balance press [ESC], any changes made will be retained when the WS is switched off (applies to Software Version 1.10 only. This includes the WS2 upgrade).

[GLOBAL] By pressing this button you can access 7 pages, which allow you to edit the Mode, Tuning, Transposition, Dynamics, and Pedal Assignment, of any of tracks A,B,C,D,E and then store them to the corresponding GLOBAL of the Style or Pattern you are working on. To scroll forward through these pages press [+Page] in the GLOBAL section, [-Page] will scroll backwards. PAGE 1 - Section Type

NOTE: press [ENT] twice to store any changes made in pages 1 to 7

After pressing [GLOBAL] in the EDIT section the LCD will display SECTION TYPE PAGE 1/7.

GLOBAL00:section type 1/7 This section allows any of the tracks A B C D E to be edited inpage any one of four modes as follows, first by pressing (flashes) and then using poly the ALPHA poly polya track button poly poly DIAL:POLY (polyphonic) keyboard, up to 16 notes. MONO P

Several notes can be played at the same time on the

Only one note will play when you hold down a chord. This mode will Page 18

automatically cancel the release/sustain of the note just played. MONO L

Only notes to the left of a note just played, can be heard.

MONO R

Only notes to the right of a note just played, can be heard.

PAGE 2 - Section Detune

The LCD reads as above. Tracks A Bdetune C D E can be tuned by degrees of -32 to +32. GLOBAL00:section page 2/7

00degrees to a00 00 will transpose 00 +/- (plus There are 64 semitone, thus 00 the detune function and minus) ½ a semitone in 32 fine steps. PAGE 3 - Section Transposer

GLOBAL00:section 3/7 in steps The LCD reads as above. Tracks A Btransposer C D E can be individually page transposed, of one semitone, to +24. 00 from -2400 00 00 00 PAGE 4 - Dynamic norm/inverse

GLOBAL00:dynamic

norm/inverse

page 4/7

The LCD reads as above. This section controls the dynamic sensitiviy of notes played in tracks norm A B C D E:- norm norm norm norm NORM

Soft to Loud (Normal playing mode)

INVERSE Loud to Soft. The harder you play, the softer the note is heard. By using this function you could layer two or more voices and set some to normal and some to inverse. When you now play softly, you will hear one voice loudly and the other layered voice softly and visa versa when you play hard.

Page 19

Some interesting effects can be created by this method such as mixing strings and piano sounds for example.

PAGE 5 - Pedals assignment

GLOBAL00:pedals assignment 5/7 The three pedal outputs on the keyboard P1, P2, P3 (Damper), page can be assigned in a number ofoff combinations (see to any one of the tracks A Bp1,2,3 C D E, to control offchart below),off off such functions as Stop/Start, Fill, Intro/Ending etc. Use the ALPHA DIAL to select the following:OFF P1 P2 P1,2 P1,2,3

Pedals P1, P2, P3 not selected Pedal 1 is selected Pedal 2 is selected Pedals 1 and 2 are selected Pedals 1, 2, and 3 are selected

To program a pedal see STATUS section page 1/5.

PAGE 6 - Pitch ball assign

assign page The pitch GLOBAL00:track ball can be assigned toball any tracks A B C D and/or E in6/7 the following combinations offusing the ALPHA off DIAL:- off off pit+mod OFF Pitch (Glissato) and Modulation (Vibrato) are not selected. PITCH Pitch is selected MOD Modulation is selected PIT+MOD Pitch and Modulation are selected

PAGE 7 - Change Global Name

To change the name of a Global, you can use a maximum of seven characters (letters/ numbers/spaces). The letters/spaces are located below the 32 VOICE buttons, and can be written in capital letters by holding down the shift button at the same time. GLOBAL00:change global Numbers are located on the GLOBAL keypad.name To correct anypage errors 7/7

old_name = Welcome Page 20

new = ?

press the arrow button under the [STRINGS] button and to save this new name: Press [ENT] Press [ENT]

LCD reads “ARE YOU SURE? Press [ENT] or [ESC]” LCD reads the new GLOBAL name

[VOICE]

VOICE 00:

voice name =GRANDP

/ ESC

TIMBRE sound samples of the WS stored in ROM memory and only the ‘octave’TIMBRE and ‘detune’ can be modified as follows:ADDSR MOD. SKEW SPECIAL Press Dial

[A] (TIMBRE) Alpha Dial to select a timbre eg. accordion

Press Read Dial

[C] (octave) LCD Oct = 16' 8' 4' Alpha Dial to select octave

Press Read Dial

[D] (detune) LCD detune Alpha Dial -32 to +32

Press

[ESC]

Attack

Decay

Break Point 2

Amplitude

EDIT

By pressing this button and using the alpha dial you can edit the WS keyboards 128 programmable voices, shown in alphabetical order. The display shows five editing sections, TIMBRE - ADSSR - MOD. - SKEW - SPECIAL as shown below:-

ADDSR GRAPH

ADSSR (Attack - Decay - Sustain - Sustain #2 - Release) these define and Release Break of Point 1 Slopetime, and control the progression a sound over consist of various sections and ‘Break Points’ all of which are completely programmable, and can be modified using Time A B C D E and then changing the value by the normal procedure of pressing buttons

Page 21

dialling the Alpha Dial. See ADDSR graph overleaf. MOD. (Modulation, similar to Vibrato) parameter changes under this function enable you to control the modulation to each voice. SKEW this function allows more control at the beginning of a sound. Trumpet, trombone, and horn etc., can achieve a “lipping” effect with this control. SPECIAL This function allows you to activate one, two or three voices, when pressing the same key/note (dynamics), depending on how soft or hard you play,through a system of two switches, displayed as Switch Level 1 and Switch Level 2 . [MIXER] By pressing this button you can control the volumes, independently, of tracks A B C D E, from levels +06dB to -26dB. It also allows you to direct the sound to a specific channel LEFT - RIGHT - CENTRE - MUTE. EDIT Press Read Dial

[MIXER] LCD section level (dB) Page 1/2 ALPHA DIAL = increase/decrease of volume

*MIXER [+PAGE] : section level (db) page 1/2 Press Read Page 2/2 00 LCD section 00 out prog 00 00 00 Dial ALPHA DIAL = left/right/centre/mute

When the second MIXER page is selected, this will automatically show STEREO in section prog and CENTRE page or 2/2 all the *MIXER sections where: DRUMKIT has out been selected MUTE in all sections where DRUMS have been selected.

Mute

Right

Centre

Left

Right

When a section has MUTE selected, this will silence the specific section and you will only hear the sound through any selected effects such as ROTARY etc. [EFF 1]

(Effect)

This control contains 16 types of multi-effects as follows:DELAY 1

CHORUS 1

PHASER 1

Page 22

ROTARY 1

EDIT

DELAY 2 CHORUS 2 PHASER 2 ROTARY 2 PAN ECHO FLANGER 1 PHASER 3 FLA/DEL DUBBING FLANGER 2 ENSEMBLE PAN MIX

[EFF 2]EFFECT_1: (Effect)Chorus2 -Enable

page 1/2

oncontains 16 off on This control types of digital on reverb as follows:EDIT

HALL 1 HALL 2 CONCERT CHURCH

on

VOCAL LARGE ROOM STEREO 1 PLATE EARLY 1 STEREO 2 SMALL ROOM EARLY 2 STEREO 3 MED ROOM EARLY 3 STEREO 4

Selecting Effects

EFFECT_2: Hall2

To select off either effect1 or effect 2:off

-Enable on

page 2/2 on

Press Read Dial

[EFF 1] or [EFF 2] LCD = effect flashes - enable page 1/2 Alpha Dial to select one of the above

Press

[ENT] to confirm (the effect won’t be active until [ENT] is pressed)

Press Dial

A B C D or E to assign the effect Alpha Dial = On/Off

on

To modify effect press [+Page] to access page 2/2, and use the normal procedure of selecting the required parameter by pressing buttons A B C D E and change the value by dialling the ALPHA DIAL. Press [ENT] twice to store edits [STATUS]Pages 1 - 5, use [+Page] to scroll through Page 1/5 This allows you to control the keyboard tuning and total transposition, the general dynamic response and assignment of functions to pedals 1 and 2.

Page 23

EDIT

[A] [B] [C] [D]

keybd tuning = tunes the keyboard from -48 to +48

STATUS: keyboard tuning pageof1/5 keybd transp = transposes the entire keyboard, in steps semitones, from00 -06 to ktr= +06 ktn= 00

krs=fst

p1=soft p2=soft

keybd respon = keyboard/dynamic response, soft, hard or off. Pedal 1 = assignment of functions to pedal 1 (soft,global+,global-, stop/ start, fill, intro/ending, sync, punch, minor, seventh) Pedal 2 = assignment of functions to pedal 2 as above except sostenuto instead of soft.

[E]

To activate any of these parameters use the normal procedure of pressing A B C D E, and dialling the ALPHA DIAL. Page 2/5 Volume Pedal Assign, dial ALPHA DIAL to select track(s) ON/OFF

Page 3/5STATUS: section pedal assign

on

[A] [B]

on

on

page 2/5 on

on

Common Chord = controlled by pedal or keyboard page (autoplay) STATUS: com_chord (pdl-kbrd) 3/5

kboard one=on kSt=off Split Chord spl=F#3 = autoplay splitbss=on can be set between C2 - B5

[C] Bass Follow = enables fundamental bass note to be played each time a chord is played [D]

One Finger = enables chords to be played with one note

[E] Key Start = ON, touch start - autoplay starts when a key is pressed, and stops when key is released. = OFF, autoplay continues when key is released PAGE 4/5

Page 24

Pedal Switch Logic, adapts pedals 1,2,3 to Normally Open = N.O or Normally Close page 4/5 = N.C STATUS: pedal switch logic

p1=N.C.

p2=N.C.

PAGE 5/5

p3=N.C.

Restore Original Blocks - Puts back into the keyboard the original factory presets of STATUS: Restore the sections VOICES, GLOBALS,Orig.Blocks SEQUENCER, DEMOS. page 5/5

VOICE

GLOBAL

SEQ

one=on

DEMO

[SPLITS] This function allows you to divide the keyboard into as many as five seperate parts allowing one or more sounds to be layered across the keyboard, from A0 to C8. EDIT

To assign either the start or end of a split carry out the following example:-

*SPLIT

: split range

page 1/2

Press [SPLIT] = start A 0-C 8 ([A] A 0-C 8 - split A range 0-C 8 Read LCD flashes) page A 1/20-C 8 A 0-C 8 (A0 to C8 is available on all tracks A B C D E) Dial ALPHA DIAL A0 to C8 or press the appropriate note on the keyboard Press Dial

[A] to programme end of split ALPHA DIAL or press the appropriate note as above

Cross split assign on page 2 allows your sounds to merge from one split point to : off cross assignsplit point. page another *SPLIT without cutting sharplysplit at the assigned This is2/2 achieved by mixing the associated sounds by different levels around the split point.

off

off

off

off

off

[MIDI] These letters stand for the words:- Musical Instrument Digital Interface. This is a code in which electronic musical instruments, computers and other devices, with this interface, can communicate with each other. Page 25

EDIT

By pressing [MIDI], [+PAGE] and using the ALPHA DIAL, you can access up to 7 *MIDI : channel page 1/7 pages of midi information, which allow section you to selectsel. the midi channels/parameters of your choice. 1 2 3 4 5 [DISK]

NOTE:- you can only save complete files not a single style, voice, or global etc.

DISK [ DIR ]

:

select function

/ ESC

[ LOAD ] [ SAVE ] [ERASE ] [FORMAT]

Disk Drive The disks should only be inserted with Disk Access LED Eject Button the label facing upwards and the metal shutter end in Metal Shutter IMPORTANT NOTE:- Before you can save any data, you must first. have a formatted disk. To FORMAT a disk carry out the following procedure:Disk Label Write Protect Tab

?

EDIT

The WS disk drive uses standard 3.5" double-sided, double-density 1 Mb (megabyte), computer disks and enables you to load and save “files” which can be made up of styles, songs, sequences, voices, and globals. It is possible to look these files up in the directory, and also erase(delete) any unwanted files.

Press Press Read Read

[DISK] [E] (format) LCD FORMAT Insert disk and strike ENT when ready Disk formatting wait please (takes approx 2 min)

Page 26

In the main [DISK] menu you can select the functions DIR (Directory), LOAD, SAVE, ERASE, and FORMAT.

ADDITIONAL FEATURES DEMOS To access the factory preset Demonstration Songs, press [STATUS] in the Edit section, press [+PAGE] in the Global section, advance to page 5, press [E] under the word DEMO, press [ENT] twice. Now press [SONG PATT.] once, so the red light is lit, press rhythm style [BEGUINE] button and press [START]. To locate further DEMOS advance through the other rhythm buttons until tracks [A],[B],[C], or [D], are lit, which will indicate that a Song Pattern has been stored, and press [START]. Note: Press [CHAIN COMPOSE] and the demo songs will play consecutively. MEMORY PUFF A 'Memory Puff' is essentially a factory reset. This operation will completely cancel all PROG. STYLES, SONG PATTERNS, CHAIN COMPOSE, VOICE editing etc., and resets the keyboard back to its original factory settings and in so doing will erase everything currently in memory. To carry out MEMORY PUFF, press the first four voice buttons (GRANDP, PIANO, RHODX & Fm PIANO) on the top row of the voice section and the last four buttons (CHOIR, STRINGS, DIAL & DRUMS) on the bottom row of the voice section at the same time. You can in fact hold down any of the first four and last buttons to perform the above. Generally MEMORY PUFF is used as a last resort. However, NO damage will result to the WS when performing this function and thus can be perfomed as many times as you wish. Alternatively you could save your default settings to disk in an ALL file and use this as a 'template'. Instead of performing a MEMORY PUFF, you can now just load your 'template' ALL file.

Page 27

Part 2 LESSON 1 - DISK PROCEDURES In this lesson we shall:-

Load an .ALL file from your “TUTORIAL DISK” Format a blank disk, and label it “TUTORIAL BACK-UP DISK” Save to this disk a copy of the .ALL file

IMPORTANT NOTE: Ensure that your “TUTORIAL DISK” is write-protected as shown below: WRITE PROTECT TAB No Hole: No Write Protect

EDIT

Open Hole: Write Protected

LOADING AN “.ALL” FILE Insert your “TUTORIAL DISK” into the disk drive. Press LCD

[DISK] (edit section) reads = SELECT FUNCTION

Press LCD

[B] = LOAD reads = [VOICE] [GLOBAL] [SEQ] [ALL]

Press LCD

[E] = ALL reads = Load LESSON1.ALL /ESC

(Note:- if you turn the ALPHA DIAL you can read other “.ALL” files on the disk)

Press LCD

[ENT] reads =

Press

[ENT]

Load LESSON1.ALL - ARE YOU SURE?

(green light on the disk drive will remain lit until data has loaded completely.)

Press

[PROG STYLES]

Press LCD

[BOSSA] reads = 64 LESSON1 GLOBAL 64 BOSSA

You have now correctly loaded your first .ALL file. Page 28

FORMATTING A DISK Take out your “TUTORIAL DISK” from the disk drive. Press LCD

[DISK] (edit section) reads = SELECT FUNCTION

Press LCD

[E] = FORMAT reads = insert disk and strike ENT when ready.

Note:- Have a blank-disk ready labelled “TUTORIAL BACK-UP” Insert blank disk labelled “TUTORIAL BACK-UP” making sure you have moved plastic slider to close the window (as shown above) to UNPROTECT the disk. Press LCD

LCD

[ENT] reads = Formatting please wait...... Green light on disk drive remains lit until formatting has been completed, approx. one minute. reads = SELECT FUNCTION / ESC

Normally you would press [ESC] to leave this function, however we are now going to use the function SAVE. SAVING AN .ALL FILE Now we are going to save LESSON1.ALL file, which is still in the memory of the WS, to the disk labelled “TUTORIAL BACK-UP” (formatting a disk will not erase any data inside the WS). Press LCD

[C] = SAVE reads = FILE SAVE [VOICE] [GLOBAL] [SEQ] [ALL]

Press LCD

[E] = ALL (flashes) reads = SAVE NAME ??.ALL /ESC

You will now have to type in the name of the file you are saving by using the alphabet buttons (which are below the “voice” buttons [GRAND P] to [DRUMS]), and the “GLOBAL” keypad buttons to enter a number. Now type the word LESSON1 (use the backspace arrow under [STRINGS] to correct or change anything you have typed) Press LCD

[ENT] reads = ARE YOU SURE?

Press LCD

[ENT] reads = saving LESSON1.ALL wait please

Congratulations! You have now saved your first .ALL file. Page 29

DIRECTORY FUNCTION This function will display in the LCD screen a list of the names of each file you have stored (on your disk) under [VOICE] [GLOBAL] [SEQ] and [ALL]. Note: - [ALL] is a file containing all the data of VOICE, GLOBAL and SEQUENCER.

DISK [ DIR ]

:

select function

/ ESC

[ LOAD ] [ SAVE ] [ERASE ] [FORMAT]

DISK: D I R E C T O R Y [voice] [global] [ seq. ] [

/ ESC ] [ all ]

DISK: DIRECTORY [voice] [global]

/ ESC ] [ all ]

LESSON1.ALL [ seq. ] [

To check that you have successfully saved your file LESSON1.ALL to your disk. Press LCD

[DISK] reads = SELECT FUNCTION

Press LCD

[A] = DIR (directory) reads = DIRECTORY - [VOICE] [GLOBAL] [SEQ] [ALL]

Press LCD

[E] = ALL reads = Directory LESSON1.ALL

This confirms that LESSON1.ALL file has been saved. Note:- Any other files which have been saved can be read by turning the ALPHA DIAL, which are stored numerically and alphabetically. Press

[ESC] twice to return to previous display

Page 30

Part Three LESSON - COPYING AND EDITING STYLES, GLOBALS AND VOICES Load the .ALL file LESSON1.ALL from your “TUTORIAL BACK-UP” disk (if not already loaded), as shown on page 28. COPYING AN INTERNAL STYLE WITH ITS GLOBAL TO A PROG STYLE In this example you are going to copy Internal Style 97 Beguine to Prog Style 65 Beguine. Press Press Press LCD

[PROG STYLES] [BEGUINE] [REC] (lit) reads = PROG STYLES [NAME] [TEMPO] [COPY] [CLEAR] [RIFF]

Press LCD Dial

[C] = COPY reads = COPY From: —— To: 65 Empty ALPHA DIAL to select 97 Beguine

Press LCD

[ENT] reads = ARE YOU SURE? Mem = ... (available memory)

Press Press Press

[ENT] [ESC] twice [BEGUINE] Lights on tracks ABC confirm copying has taken place [START] and play a chord in the lower octave.

Press

Listening to this copied style you will hear a difference from the original Internal Style Beguine, this is because the DATA only has been copied, not the GLOBAL settings ie Voices, effects etc,. Press [INT STYLES] then press [PROG STYLES] whilst playing to compare the two styles. To copy the GLOBAL from INT STYLES BEGUINE to PROG STYLES BEGUINE:Press Press LCD Dial Press Press Press

[INT STYLES] [BEGUINE] (tracks ABC lit) [ENT] reads = STORE GLOBAL 97 BEGUINE to 97 BEGUINE ALPHA DIAL to select 65 BEGUINE [ENT] [PROG STYLES] [BEGUINE] [START] and play a chord.

The two styles will now be identical. EDITING YOUR COPIED STYLE

Page 31

In this example we will edit the volumes, voices, effects, and transposition of your copied style. CHANGING THE VOLUMES OF A TRACK Press

[PROG STYLES] [BEGUINE], press [START] and play a chord in the lower octave of the keyboard (ABC lit - this denotes autoplay on these tracks)

Press Press Dial

[MIXER] - (whilst keyboard is still playing.) [A] (flashes) ALPHA DIAL to +05

Press Dial

[D] (flashes) ALPHA DIAL to -01

Press

[ENT] twice (this edit of volumes has now been stored.)

Press

[STOP]

SELECTING A DIFFERENT VOICE ON A TRACK:Press Press Press

[E] (ACCORD -flashes) [FL.HORN] (in voice section) [C] (GUITAR -flashes)

Press and Hold down [@ DIAL/SPACE] (in voice section) and at the same time dial ALPHA DIAL to “GRANDmf” now on track[C]. Press

[ENT] twice to store these voice changes.

NOTE:- It is best to make any changes to your style whilst the keyboard is playing, as you can then hear what you are doing. CHANGING THE EFFECTS OF YOUR COPIED STYLE:Press Press LCD

[START] - hold down a chord in the lower octave [EFF1] (edit section buttons) reads = Delay 1 (flashes) -Enable

Press Dial

[C] = OFF ALPHA DIAL to ON

Press LCD Dial

[+PAGE] (Global section buttons) reads = MIX=-28 (flashes) track [A] ALPHA DIAL to -24 (increases the delay effect)

Press

[ENT] twice This edit is now stored. [EFF2] (edit section buttons)

Press

Page 32

LCD Dial

reads = Concert (flashes) - Enable ALPHA DIAL to VOCAL

Press Press Dial

[ENT] [A] = OFF ALPHA DIAL to ON

Press

[ENT] twice

The choice of effects are up to you. So have fun trying them out! TRANSPOSING A TRACK Using your copied style, you can create an interesting effect simply by transposing a track up or down a full octave (ie 12 semitones), you can do this while the keyboard is playing. Press Press LCD

[GLOBAL] (edit section button) [+PAGE] twice (Global section button) reads = SECTION TRANSPOSER page 3/7

Press Dial

[C] = 00 ALPHA DIAL to +12 (GRANDmf will be increased by one octave) [ENT] twice

Press

A completed example of all the edits in this lesson have been stored on [PROG STYLE] [MARCH] for you to listen to. REPROGRAMMING TEMPO INTERNAL STYLES ONLY Choose an Internal Style ie 96 BOSSA Press LCD Dial Press

[REC] reads Tempo = 120 ALPHA DIAL to 114 [ESC] tempo selected is now stored to this style

PROGRAMME STYLES / SONG PATTERNS Choose a Programme Style or Song Pattern. ie (68) EIGHTB Press LCD

[REC] reads = [NAME] [TEMPO] [COPY] [CLEAR] [RIFF]

Press LCD Dial Press

[B] reads Tempo = 80 ALPHA DIAL to 110 [ESC] twice tempo is now stored to this style Page 33

USING TRACK TEMPO FUNCTION Press

[TRACK TEMPO] light goes out All styles selected will now play at the same tempo as displayed.

Dial

ALPHA DIAL to increase/decrease the tempo manually

NOTE:- To restore original tempo press [TRACK TEMPO] red light on MUTING AN AUTOPLAY TRACK This example mutes the Data and Voice Choose Internal Style 96 Bossa for example:Press

[START] and play a chord in lower octave

Press

[C] = JAZZGTR (flashes)

Press LCD

[C] again reads OFF (Jazzguitar will not be heard)

Press

[C] again to restore JAZZGTR track

USING [PLAY TRACKS] FUNCTION This next example mutes the Data, but the Voice of the Jazzgtr will be heard as you play notes in the upper octaves. Choose Internal Style 96 Bossa for example:Press

[START] and play a chord in lower octave

Press and Hold down [PLAY TRACKS] and Press [C] these buttons are now unlit Jazzgtr will be heard along with Strings and Flute when you play in the upper octaves. Press and hold down [PLAY TRACKS] and Press [C] to restore the data on Track [C] red light on Press Press

[PLAY TRACKS] again, red light is now on [STOP]

MUTING A TRACK OF A SONG PATTERN In this example you will be able to turn off the melody on track [E] of SONG PATTERN 32, enabling you to play along with the song. Press [SONG PATT] Page 34

Press

[BOSSA] = Song Pattern 32 (ABCE tracks lit)

Press

[START]

Press and hold down [PLAY TRACKS] and Press [E]red light is off. You are now able to play along using the Voice of track [E]. NOTE:- Using this method you can turn off any track. The choice is yours. CHANGING GLOBALS WHILST PLAYING A STYLE This is a quick and easy way of varying the global settings of a style, so try it out and hear the difference it makes to the arrangement:Press

[INT STYLES] [BOSSA]

Press

[START] and play a chord in lower octave

Press LCD

[0] and [1] of GLOBAL section buttons reads = 96 BOSSA GLOBAL 01 LOVE (the panel settings of GLOBAL 01 will be heard instead of GLOBAL 96.)

Global 01 LOVE is a factory layered program allowing STRINGS and PIANO to be played together across the full length of the keyboard. Play the keyboard now to hear this effect. Press

[+PAGE] whilst the style is playing, to scroll through consecutive Globals, or simply enter in your favourite Global number. [-PAGE] will scroll backwards.

NOTE: If you STOP and then START the keyboard at any time during play, the style will revert back to its original global number, in this case GLOBAL 96. If you want to save another global to your style simply press [ENT] twice. HOW TO ASSIGN A SPLIT AND MAKE A LAYERED SOUND In this example we are going to use INT STYLES BOSSA and change the split of the STRINGS from the lower octave to the upper octave of the keyboard, in order to make a layered sound with the FLUTE:Press

[INT STYLES] [BOSSA]

Press LCD A0.C8

[SPLITS] (edit section buttons) reads = Split range A0.C8 G3.C8 A0.F#3 G3.C8

Page 35

[A] [B] (Drums) (Bass)

[C] [D] [E] (Jazzg) (Strings) (Flute)

Press Dial

[D] - A0 flashes ALPHA DIAL to select F3, or press F3 on keyboard

Press Dial

[D] again - F#3 flashes ALPHA DIAL to select C7, or press C7 on keyboard

Press

[ENT] twice to store this change to Global 96.

Press

[START] and play a chord in lower octave, STRINGS will not be heard. However, all notes played in the upper octaves above F3 will play a layered sound of STRINGS and FLUTE.

HOW TO EDIT AND PROGRAM VOICES First of all we shall save the VOICE data only in the keyboards memory to our “TUTORIAL BACK-UP” disk as a .VCE file. The reason for this is that we want to keep a copy of the voices before we carry out voice editing. Assuming you are working your way through this TUTORIAL GUIDE, lesson by lesson, you should have, at this point, loaded into the keyboard’s memory LESSON1. SAVING A VOICE FILE Press

[DISK]

Press

[C] = SAVE

Press LCD

[A] = VOICE (flashes) reads = Save Name ??.VCE (Type using the alphabet keys the name ORIGINAL)

Press Press

[ENT] twice [ESC]

EDITING A VOICE EDIT In this example we are going to create a different trumpet sound using the Voice data. We purposely chose a TIMBRE in which changes would dramatically show you how you can create a new voice.

VOICE 20: TIMBRE

voice name =TRUMPET ADDSR

MOD.

Page 36

SKEW

/ ESC SPECIAL

Amplitude

Attack

Decay

Break Point 1

Break Point 2

Slope

ADDSR GRAPH

Release

Time ADSSR PROGRAMMING:- (Note:- Use alpha dial to change the values) Press Dial

[VOICE] (edit section buttons) ALPHA DIAL select voice 20 TRUMPET in LCD display

Press

[B] ADSSR

Press

[A] (attack time) atk = 00 change to 27 using ALPHA DIAL

Press

[B] (Decay 1) dc1 = 09 change to 48

Press

[C] (BreakPoint 1) bp1 = -06 change to -39

Press

[D] (Decay2/Slope) dc2 = 99 change to 60

Press

[E] (BreakPoint 2) bp2 = -06 change to -48

Press

[+PAGE] to go to Page 2

Press

[A] (Release Time) rls = 15 change to 51

Press

[B] (Envelope Tracking) etk = 01 change to 01

Press

[C] (Dynamic Sensitivity) sdn = 03 change to 01

Press

[D] (Voice Level/Volume) lev = +06 change to 00

We are now going to store this voice edit:Page 37

Press LCD Dial

[ENT] reads = STORE VOICE: 20 TRUMPET TO: .........? ALPHA DIAL to 120 SPACE 1 in alphabetical order (or any voice number you wish to write over)

Press

[ENT] - voice is now stored as 120 TRUMPET

We are now going to rename this voice, as it would be impractical to have two differing TRUMPET sounds with the same name:Press Dial

[VOICE] (edit section buttons) ALPHA DIAL to 120 TRUMPET (in this example)

Press

[E] SPECIAL

Press LCD

[+PAGE] reads = change voice name old name = TRUMPET new = ? using alphabet keys TRUMTON or any name you wish to call it (Hold SHIFT for capital letters)

Type

Press

[ENT] twice

Compare the two trumpet sounds TRUMPET and TRUMTON! To hear how the other 127 TIMBRES (sampled sounds) would sound with the above ADSSR edits:Press Dial

[VOICE] ALPHA DIAL to select 120 TRUMTON

Press Dial

[A] TIMBRE ALPHA DIAL to scroll through, play and hear each TIMBRE

This is a quick way of writing a new voice. FURTHER VOICE EDITING (Modulation, Skew) In this example we shall use the new voice 120 TRUMTON:Press Dial

[VOICE] (edit section buttons) ALPHA DIAL to select 120 TRUMTON

Press

[C] (MODULATION)

Press

[A] (Delay) dly = 50 change to 127 using ALPHA DIAL [B] (Type) typ = 01

Press

Page 38

change to 04 Press

[C] (Depth] dpt = 01 change to 08

Press

[D] (Frequency) frq = 45 change to 06

Press

[ESC]

Press

[D] (SKEW)

Press

[A] (Skew On/Key On) kon = off change to ON using ALPHA DIAL

Press

[B] (Skew On/Key Off) koff = off change to ON

Press

[C] (Type) typ = 01 leave as 01

Press

[D] (Depth) dpt = +01 change to -24

Press

[E] (Time) tme = 00 change to 06

Store this voice edit to 69 SPACE2 and rename, as explained previously. SAVING YOUR EDITS TO DISK AS A .VCE FILE We shall now save these voice edits to your TUTORIAL BACK-UP disk as a .VCE file, and name it NEWONES. NOTE:- Ensure your TUTORIAL BACK-UP DISK is UNPROTECTED (ie plastic tab window closed) and inserted into your disk-drive Press LCD

[DISK] (edit section buttons) reads = SELECT FUNCTION

Press

[C] = FILE SAVE

Press LCD Type

[A] = VOICE reads = Save ORIGINL.VCE using alphabet keys NEW ONE over ORIGINAL

NOTE:- Don’t worry the ORIGINAL.VCE file will not be erased, it is just the way the WS works! Press [ENT] twice to save If you wish to Load back ORIGINL.VCE file (which has SPACE 1) the procedure is Page 39

as follows:Ensure TUTORIAL BACK-UP disk is in drive. Press

[DISK] (edit section buttons)

Press

[B] LOAD

Press Dial

[A] VOICE ALPHA DIAL to select ORIGINL.VCE

Press

[ENT] twice

The original voice data only has now loaded, and the edits you made to your programme styles, globals etc in the previous lessons have not been affected, they are still in the keyboards memory. All we did was to load a new voice file. Similarly, you can save and load globals, and sequences in the same way. PROGRAMMABLE DRUMKIT The programmable DRUMKIT is voice 127 and is not to be confused with DRUMS (WS non-programmable). Assign DRUMKIT to track [A] by holding down [@ DIAL] and dialling the ALPHA DIAL, then turn OFF tracks [B] [C] [D] [E]. These are the edits you can make to your drumkit:* COPY * FOLD * MODIFY:[A] = Assign each sound to the Left, Right or Both speakers, or Mute. [B] = Assign effects EFF1, EFF2 or both [C] = Volume level -08 to +06 dB [D] = Sampling or Pitch Frequency from 7.90Khz to 40.1Khz * SPECIAL:- In this function it is possible to program a second drum instru ment to play on the same key. The instrument you hear will depend on how hard or soft you press the key. This is called DYNAMIC SWITCH. * RESTORE:- Restores the original factory preset DRUMKIT

VOICE127 : voice name = DRUMKIT Bd Gate

Key=C 2

fld=off

Page 40

/ ESC

[MODIFY] [SPEC. ]

HOW TO ACCESS THE EDIT FUNCTIONS OF THE DRUMKIT Press Press LCD

[A] DRUMKIT flashes [VOICE] (edit section buttons) reads = VOICE 127 DRUMKIT (Bd GATE flashes)

Bd Gate

Key = C2

[A]

[B]

Fold

[C]

Modify Special [D]

[E]

Press Dial

[A] = Bd Gate (flashes) ALPHA DIAL to assign a different instrument to C2

Press Dial

[B] Keynote (flashes) ALPHA DIAL to change keynote or press any key from C2 to C7

Press

[C] (FOLD ON/OFF) adds another octave to your DRUMKIT

Press

[D] (MODIFY)

Press

[A],[B],[C], or [E] and use ALPHA DIAL to change values as shown in MODIFY above

Press

[ESC]

Press

[SPECIAL]

Press

[A] (Dynamic Switch On/Off) use ALPHA DIAL on/off

Press

[B] (Instrument Switch) use ALPHA DIAL or press a key to select a 2nd Instrument

Press

[E] to restore original DRUMKIT, then [ENT] or [ESC]

EDITING THE DRUMKIT In this example we are going to reduce the volume of the RIMSHOT, change the effect, panning and frequency, and also assign a second instrument using the SPECIAL feature, and finally copy it to C7:Ensure DRUMKIT is flashing on [A] track, and all other tracks are turned off.

Bd Gate centre

C 2 eff 2

-instrum. output prog / ESC lev=+6

Page 41

frq=10.3

VOLUME:Press

[VOICE] (edit section buttons)

Press

B2 on the keyboard = Rim Shot (flashes LCD [A])

Press

[D] MODIFY

Press

[C] (LEVEL) lev = +06 change to 00 using ALPHA DIAL

FREQUENCY:Press

[D] (FREQUENCY) frq = 8.37 change to 7.90 using ALPHA DIAL

PANNING:Press

[A] (INSTRUMENT OUTPUT)= centre (flashes) change to “right” using ALPHA DIAL

EFFECTS:Press

[B] (EFFECTS SEND) eff 2 (flashes) change to “eff1/2” using ALPHA DIAL

Press

[ESC]

SPECIAL:Press

[E] (DYNAMIC SWITCH) sw= off change to ON using ALPHA DIAL

Press

[B] (INSTRUMENT SWITCH) select CLAPS by dialling ALPHA DIAL or press B3

Press

[ESC]

We are now going to copy the Rim Shot to C7:Press

[B] (Key = B2) change to C7 by dialling ALPHA DIAL or press C7

SAVING EDITS:Press

[ENT] twice

Page 42

IMPORTANT NOTE:- SAVING YOUR EDITS TO DISK If you wish to save any edits you have made to disk as an ALL file, VOICE file etc., remember to rename the file, if you want to keep your original files. For example:- You have loaded LESSON1.ALL (an ALL file) already in the keyboard, and have made edits to the drumkit, programme styles etc., which you wish to save to disk as an .ALL file. By renaming this file LESSONX you will not lose the original LESSON1 file. See SAVING A VOICE FILE TO DISK section, page 39, to remind you how to save a file to disk, however ensure you press [ALL] instead of [VOICE]. Key

Not

No.

Key

Not

No.

Instrument

C2

36

1

Bass Drum - GATE KIT 1

Instrument

C5

72

37

Bongo 2 - High - PERC.

C#2

37

2

Snare Noise

C#5

73

38

Bongo 1 - Low

D2

38

3

SD Gate

D5

74

39

Conga 2/3 - High

D#2

39

4

SD Fusion

D#5

75

40

Conga 1 -Medium

E2

40

5

Tom Room 1 - High

E5

76

41

Conga 4 - Low

F2

41

6

Tom Room 2 - Medium

F5

77

42

Guiro

F#2

42

7

Cabasa

F#5

78

43

Quica 1 - Low

G2

43

8

Tom Room 3 - Low

G5

79

44

Timbale 1 - High

G#2

44

9

Tambourine 1 - Soft Short

G#5

80

45

Timbale 2 - Low

A2

45

10

Tom Room 4 - Big

A5

81

46

Agogo 1 - Low

A#2

46

11

Cowbell

A#5

82

47

Triangle

B2

47

12

Rimshot

B5

83

48

Whistle Loop

C3

48

13

Bass Drum - JAZZ KIT 2

C6

84

49

Vox Bass Drum - VOICE

C#3

49

14

Brush 2 / Brush 3

C#6

85

50

Shot

D3

50

15

Snare Drum Jazz 1

D6

86

51

Vox HOH

D#3

51

16

Brush 1

D#6

87

52

Vox SPOO

E3

52

17

Tom 1 - High

E6

88

53

Vox BOOM

F3

53

18

Tom 2 - Medium

F6

89

54

Vox Tom - High

F#3

54

19

Hi Hat 1 Closed

F#6

90

55

Vox Hi Hat 1

G3

55

20

Tom 3 - Low

G6

91

56

Vox Tom - Low

G#3

56

21

Hi Hat Foot

G#6

92

57

Vox Hi Hat 2

A3

57

22

Wood Block

A6

93

58

Vox Tip

A#3

58

23

Hi Hat Open

A#6

94

59

Vox Tap

B3

59

24

Claps

B6

95

60

Vox Tip Tap

C4

60

25

Bass Drum - DRUM KIT 3

C7

96

61

Vox HAA Voice - FOLDED

C#4

61

26

Ride

C#7

97

62

Tambourine 2 - Acc Long

D4

62

27

Snare Drum

D7

98

63

Brush 3

D#4

63

28

Ride Cup

D#7

99

64

Snare Drum Jazz 2

E4

64

29

Electric Tom 1

E7

100

65

Hi Hat 2 - Closed

F4

65

30

Electric Tom 2

F7

101

66

Claves

F#4

66

31

Splash

F#7

102

67

Conga 3 - Slap

G4

67

32

Electric Tom 3

G7

103

68

Quica 2 - High

G#4

68

33

Crash Cymbal 1

G#7

104

69

Agogo 2 - High

A4

69

34

Vibra Slap

A7

105

70

Metronome 1 - Freq. 1

A#4

70

35

Crash Cymbal 2

A#7

106

71

Metronome 2 - Freq. 1

B4

71

36

Bells

B7

107

72

Metronome 1 - Freq. 2

C8

108

73

Metronome 2 - Freq. 2

Default WS Drumkit 1.10

Page 43

Part Four LESSON - USING THE SEQUENCER NOTE:- Load LESSON2 from your “WORKING DISK” into the keyboard and save this lesson to your “TUTORIAL BACK-UP DISK (see DISK PROCEDURES “Loading an .ALL file” and “Saving an .ALL file). There are three ways of recording a song pattern using the sequencer as follows:1. Single Track by Track 2. Internal Styles (using automatic accompaniment) 3. Programme Styles (using automatic accompaniment) SINGLE TRACK RECORDING Song Pattern numbers and globals are 32 - 63. To record a single track:Press [SONG PATT] (lit) Press [BOSSA] (Pattern No. 32 in this example) Note:- Choose an empty pattern or one you are happy to clear Press [REC] LCD Reads = 32 EMPTY:
View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF