Garment specification sheet

Garment Specification Sheet Garment : Sleeveless Jacket

Submitted by:-

Ashish Kumar Annepu (05) Debajtoti Bhattacharya (06) B.F.Tech (Apparel Production) 2007 – 2011

National Institute of Fashion Technology Hyderabad

STYLE DESCRIPTION Brand :- KUOTONS

Style number :- JacSty112

Merchandise group:- Men’s Sleeve less Jacket

Selling period:- Spring summer 2010

Body type:- Teen and Adult men’s

Size range:- M,L,XL

Date approved :- 8/1/2010

Approved by:- Albie Flintoff (Technical designer)

Date modified:- 19/2/2010

Approved by:- Albie Flintoff (Technical designer)

Sample size- M(100cms)

Verbal description:- The jacket is a straight sleeveless jacket with a lining attached within. Two patch pockets (3-D) on L & R front with single lip and mini patch pockets (3-D) on them. Additional patch pocket on left front with a single lip opening. A single lip pocket and a patch pocket (2-D) on lining in inner side of left front. Fabrics:- Shell fabric- blended polyester fabric , Lining fabric:- Quilted nylon fabric , nylon pocket fabric Trims:- zippers ,Velcro. hanger loop , Special instructions :-

PRODUCT OVERVIEW FRONT

BACK

Product id:- A098887

Product name:- Men’s sleeve less jacket

Season :- Spring summer 2010

Brand:- Kuotons

Designer :- Sarah Rudolf

Buyer:- Kuotons retail

MEAUREMENT DETAILS OF THE SIZE SET S.NO

PARAMETER

DIMENSION (INCHES)

1

Full-Length

25”

2

Shoulder length

17 ½ “

3

Across chest 1” below armhole

21 5/8”

4

Armhole round

24 ¾”

5

Across hem

40.5”

6.

Neck round

19 ½ “

7

Side seam

15 ¼”

FRONT

MEAUREMENT DETAILS OF THE SIZE SET S.NO

PARAMETER

DIMENSION (INCHES)

1

Centre Back Length

30”

2

Yoke length

16 ¼ “

3

Yoke width at armhole

3 ½”

4

Yoke width from neck level(centre back)

7”

BACK

MEAUREMENT DETAILS OF THE SIZE SET S.NO

PARAMETER

DIMENSION (INCHES)

SHOULDER PIECE(FRONT TO BACK)

1

2

Length along armhole

Length along neckline

6 7/8”

2¾“

MATERIALS SELECTION AND SPECIFICATIONS NUMBER OF MATERIALS :- 6

STYLE NUMBER:- JacSty112 LIST OF MATERIALS :- Blended polyester fabric, Quilted nylon lining fabric ,zippers, Velcro, hanger loop and thread

MATERIAL NAME :- Quilted BlendedNylon polyester lining fabric fabric VENDOR :- Not yet specified MATERIAL DESCRIPTION :- Pre-quilted Piece dyedfabric fabric COLOR[S]:- Pantone #214a68 #4f4d52 FIBER CONTENT:- Nylon Polyester andand foam blends for quilt YARN TYPE/SIZE:FABRICATION:COUNT/GAUGE: epiepippippiWEIGHT/SIZE:STRUCTURAL/APPLIED DESIGN:DESIGN:-Plain Plain FINISHES:CARE INSTRUCTION:- Dry clean only

FABRIC SWATCH

FABRIC SWATCH

MATERIALS SELECTION AND SPECIFICATIONS NUMBER OF MATERIALS :- 6

STYLE NUMBER:- JacSty112 LIST OF MATERIALS :- Blended polyester fabric, Quilted nylon lining fabric ,zippers, Velcro, hanger loop and thread

MATERIAL NAME :- Nylon pocket fabric VENDOR :- Not yet specified MATERIAL DESCRIPTION :- Piece dyed fabric COLOR[S]:- Pantone # 2d4341 FIBER CONTENT:- Polyester and blends YARN TYPE/SIZE:FABRICATION:- Nonwoven COUNT/GAUGE: epippi WEIGHT/SIZE:STRUCTURAL/APPLIED DESIGN:-nil FINISHES:CARE INSTRUCTION:- Dry clean only

MATERIALS SELECTION AND SPECIFICATIONS NUMBER OF MATERIALS :- 6

STYLE NUMBER:- JacSty112 LIST OF MATERIALS :- Blended polyester fabric, Quilted nylon lining fabric ,zippers, Velcro, hanger loop and thread

MATERIAL NAME :- Front closing zipper

VENDOR :- YKK India MATERIAL DESCRIPTION :- A plastic slider with a heavy woven fabric loop on slider head COLOR[S]:- Pantone # 666189 SIZE:- zipper size:-5N STRUCTURAL/APPLIED DESIGN:- “KUOTONS” rubber printed on the fabric loop attached to slider MATERIAL NAME :- single lip pocket zippers

VENDOR :- YKK India MATERIAL DESCRIPTION :- A plastic slider with heavy a woven fabric loop COLOR[S]:- Pantone # 666189 SIZE:- 5N

CONSTRUCTIONAL DETAIL SHEET

Lining

The lining fabric is a readily available quilted fabric. The lining patterns do not consist of the shoulder pieces present in the front and back panels of the shell fabric.

Facing Inside the fronts there is a facing of body fabric attached in front inside which has dimension as follow:

s.no

Parameters

1

Dimension 20 ½”

Length along C.F 2

2” Width at hem

3

1” Width at shoulder

Yoke on back Lining A yoke in shape of a patch is present along the neckline attached to the back body lining fabric on which the size/company label is stitched. The dimensions of the yoke are as follows:-

POCKETS

s.no

Parameters

Dimension

1

Length along neckline

10.5

2

Length at bottom

5 ¾”

3

Width along centre back

6”

4

Width at shoulders

1”

CHEST POCKET There is a single lip opening patch pocket on the left front at the chest level. The pocket is located at 3 inches down along the zipper and 2 inches across on the left front panel. The zip sliders have woven fabric loopers attached

Sno

Parameter

Dimension

1

Length

6”

2

Width

5”

3

Single lip opening

5”

4

Lip distance from pocket edge parallel to C.F

1”

5

Lip distance from pocket edge parallel to hem ½”

Lower patch pocket

The lower patch pocket is present on both the garments unlike the chest pocket being only present at the left . the pocket has a flap opening ,a single lip pocket and a mini patch pocket also constructed. Its location is 11 ¼ “ down along the zipper from neckline and 2” across into the front body . The main dimensions are as follows:

S.no

Parameter

Dimension

1

Length

8 ½”

2

Width

7 5/8”

3

Flap width

2 ¾”

4

Opening edge length

5 ½”

Single lip pocket The single lip is constructed within the lower patch pocket facing towards side seams with a black no pilling pocket bag fabric the following dimensions:

S.no

Parameter

dimension

1

Length

7 ½”

2

Width

7 3/8 “

3

Single lip opening

5 7/8”

5

Lip distance from pocket edge 1” parallel to C.F

5

Lip distance from pocket edge ¾” parallel to hem

Mini patch pocket The Mini patch pocket is constructed on the lower Patch pocket in form of a square shape with dimensions 3 ¼ “X 3 ¼ “. It is located at 2” from the opening edge of the single lip pockets constructed towards the centre front. A black no pilling pocket bag fabric

INSIDE UTILITY POCKET: There shall be one set-in pocket on the left inside lining. This shall be a welt pocket.The functional pocket opening shall be a minimum of 4 7/8” and the pocket depth shall be a

minimum o 8” measured from the top to the bottom of the pocket bag. The pocket bag shall be made of a good commercial non-pilling pocketing fabric of black color. It should be 5 ¼ down along the zipper front and 2 inches inside on the the lining.

INSIDE PATCH POCKET There is a normal 2-D patch pocket with a Velcro opening. The dimensions of the pocket are length-5 ½” and width – 3 3/8”. The location of the pocket is at 11 ¼” down along the zipper front from neckline and across 2 ¼ “ into the linning body.

TRIMS DETAILS

ZIPPERS Front closure zipper:- There shall be a nylon, non-reflective non-freeze 1-way zipper from the bottom of the jacket to the top edge of the collar.

Pocket zippers – Pocket zippers are to be of nylon, non reflective short closed end zippers as per pocket lip sizes required.

HANGER LOOP A hanger loop is to be attached at the centre front between the collar and the back lining . The material to be used for the the loop can be of the fabric used in the outer fabric.

VELCRO Three Velcros , two in front lower pockets and 1 in the inner patch pocket with waist band in back side with loop. Velcro dimensions are as follows:

Sno

Parameter

Dimension

1

Length

1 ½”

2

Width

1”

Garment Label Information

Style Number:- JacSty112 Label /Ticket information

Brand Label Type :- Embossed on rubber/Rexene yoke(lining)

Size – 2 3/8” X 3 3/8”

Location:- on back patch

Wording:- “ The debut of a new prestigious collection of outer wear by KUOTONS”

Size Label Type :- Embossed on rubber/Rexene

Size – 1 X 1 ¼”

Location:- on back patch yoke(lining)

Wording:- “KUOTONS M/100CMS

Fiber content label Type :-

Size –

Location:-

Wording:-

Country of origin label Type :-

Size –

Location:-

Wording:-

Care instruction label Type :- Nylon nonwoven Wording:- “Dry clean only “

Size –

1X ¼ “

Location:- Side seam on linning(left)

OPERATION BREAKDOWN

OPERATION

SSPI

Stitch Type

Machine used

Seam type

Shell fabric assembly Preparation of Single lip + zipper attachment (chest pocket)

9

301

SNLS

SSs,SSc

Chest pocket attachment to left front panel

9

301

SNLS

Lsd

9

301

SNLS

Cover + lower pocket attachment to front (left and right)

9

301

SNLS

LSd

Attachment of design panel on right front

9

301

SNLS

LSs

Yoke attachment to lower back panel

9

301

SNLS

LSe

Shoulder piece attachment to front and back

9

301

SNLS

LSa

Preparation of lower pocket (cover + single lip + mini patch pocket)

LSd

Inner lining assembly Preparation of inner lining(single lip pocket stitch)

9

301

SNLS

SSc

Patch pocket attachment to lining

9

301

SNLS

LSd

Single lip pocket in lining

9

301

SNLS

SSc

Facing + back patch & label attachment to lining

8

301

SNLS

LSa

9,9

301,301(DN)

SNLS+DNLS

Attaching zipper along with facing on fronts

9

301

SNLS

Ssj

Collar preparation

9

301

SNLS

SSe

Collar attachment

9

301

SNLS

Finishing armhole

Quality checkpoint for Final Finished Garment Matching fabric design:Colour shading:- DTM (Dyed to Match) trims and fabrics Consistency of stitches and seams : - Uniform stitches and no seam pucker on top stitches,collar,cuff,pockets,9-10 stitches per inch Compatibility of materials :- No shrinkage in any component used ( preferable) Overall appearance:- Appealing and salable to young and teenage men