FXEB_info_24_04_2013.pdf

Flexi Multiradio 3-Sector RF Module Triple 90W FXCB/FXDB/FXEB/FXFC • 1 RF module for 3-sector site, 18 carrier (3x6) capacity with integrated Duplex Filters • 3 x 80W at antenna connector • Available in 900, 850,1900 and 1800 Band • Active bandwidth software tunable for Full band@ 900 and 850 band and 35MHz IBW for 1800MHz and 1900 band • 3 RP3 01 OBSAI Interfaces, for System Module connectivity and RFM chaining • 3 TX/RX Antenna Interfaces, 3 RX Diversity Antenna Interfaces • 3 RX outputs for diversity sharing with co-sited BTS (Ultrasite/Flexi EDGE/BS2xx) • Support for AISG 2.0 (only for peer technology), Bias-T’s and VSWR measurement • Integrated DC line OVP, Class II rated to 5kA pulse • 48V DC input

1

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

• • • • •

~ 25 liters ~ 25 kg 3 height units Module IP65 -35 to +55 °C

Flexi 3-Sector RF Module Triple 90W BW and configurations for different Bands Frequency, BW (TX/RX)

850MHz, 25/25MHz (FXCB)

900MHz, 35/35MHz(FXDB)

1800MHz, 35/60MHz(FXEB)

1900MHz, 35/60MHz(FXFC)

GSM TRXs

6+6+6

6+6+6

6+6+6

6+6+6

WCDMA carriers

3+3+3

4+4+4

4+4+4

4+4+4

LTE bandwidth

1.4/3/5/10/20

1.4/3/5/10/15/20

1.4/3/5/10/15/20

1.4/3/5/10/15/20

Output power Antenna Port per sector

80W

80W

80W

80W

MCPA Concurrent mode(s) Max supported by HW:

- 5G+1U/1L(5MHz) - 4G+2U/1L(10MHz) -2U+1L(10MHz) -2G+1L(20MHz) -- 2G+1U+1L(10MHz) -2U+1L(10MHz) - 8G+2x2L(15MHz) MIMO with 2 MCPAs (RFMs) -- 8G+2x2L(20MHz) MIMO with 2 RFMs (without Rx cross cabling upto 60MHz)

- 5G+1U/1L(5MHz) - 4G+2U/1L(10MHz) -2U+1L(10MHz) -2G+1L(20MHz) -- 2G+1U+1L(10MHz) -2U+1L(10MHz) - 8G+2x2L(15MHz) MIMO with 2 MCPAs (RFMs) -- 8G+2x2L(20MHz) MIMO with 2 RFMs (without Rx cross cabling upto 60MHz)

- - 5G+1U/1L(5MHz) - 4G+2U/1L(10MHz) -2U+1L(10MHz) -2G+1L(20MHz) -- 2G+1U+1L(10MHz) -2U+1L(10MHz) - 8G+2x2L(15MHz) MIMO with 2 MCPAs (RFMs) -- 8G+2x2L(20MHz) MIMO with 2 RFMs (without Rx cross cabling upto 60MHz)

- 5G+1U/1L(5MHz) - 4G+2U/1L(10MHz) -2U+1L(10MHz) -2G+1L(20MHz) -- 2G+1U+1L(10MHz) -2U+1L(10MHz) - 8G+2x2L(15MHz) MIMO with 2 MCPAs (RFMs) -- 8G+2x2L(20MHz) MIMO with 2 RFMs (without Rx cross cabling upto 60MHz)

GSM/LTE, GSM/WCDMA GSM/WCDMA/LTE WCDMA/LTE

2

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

Site Bag/Contents of the Triple RF Module Existing RF Module (3x70W RFM) sales Item Following Items are Included in Site Bag • RF Module with fan assembly and without the casings • 2.0 meter long IP55 protected outdoor cable for 48 V DC • 2.0 meter long IP55 protected outdoor multimode optical system cable • Two pluggable SFP Multimode optical transceivers, one to System and other one to RF Module SFP optical transceiver

DC cable, 2m

Optical cable, 2m

New RF Module (3x90W RFM) sales item All new Flexi radio Modules (3x90W) does not have DC cable, SFPs and Optical Cables and due to new screw terminal in RFM and two connectors options in System Module and Also multiple Choice of SFPs and Optical cables. Optional Power cable, SFPs and optical cable details can be found in optional Item Sales Guide Following Items are Included in Site Bag • RF Module with fan assembly and without the casings • DC terminal seal • Cable Tie 3

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

3x90W triple RFM (FXxB) Powering Optional Power cable The DC cable is not included in the 90 W RF Module delivery. 48 VDC power can be fed from a System Module or directly from an external power source. DC cable requirements depends upon O/P power, input Voltage, and MHA/RET use.

Option 1: FPCA Dual Power Cable 2 m (6.6 ft)” 472806A” •

Check table in next slide for use of Dual power cable. With Dual power cable Max 2 RFM can be connected with System Module

Option 2: FPCC DC cable multibeam-open 2m (6.6 ft) ” 472823A” •

System Module

Check table in next slide for use of single cable. Up to 4 RFMs can be connected with System Module when single power cable is used. 3x90W RFM

To minimize potential site work, consider future expansion when selecting DC cables. Note : Check the power consumption. If power demand exceeds 30A, as may happen with low operating voltages with 3x90W RF Modules operating in full power mode, it is recommended to use bigger fuses in the DC feed lines. If you use a integrated power distribution unit (PDU), system module with 30A output capability, then it is recommended to use the dual power cable FPCA 472806A

4

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

3x90W triple RFM (FXxB) Powering Optional Power cable

FSMC/D/E 30A PDU When using ESMB/ESMC system module single power cable to be used along with FXxB RFM

5

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

Total Configured output Variant power 1800 180 W 1800 > 180 W 1800 > 180 W 1800 > 180 W

RET/MHA? Any Yes Yes No No

Minimum voltage Any < 46.5 >= 46.5 < 41.5 >= 41.5

Power Cable Single Dual Single Dual Single

Total Configured output Variant power 900 180 W 900 > 180 W 900 > 180 W 900 > 180 W 900 > 180 W

RET/MHA? Any Yes Yes Yes No No

Minimum voltage Any < 40 < 46.5 >= 46.5 < 41.5 >= 41.5

Power Cable Single Dual Single Single Single Single

Details on HW Activation Licenses • Multiradio TRX Activation License: BSC00311 – License implemented in BSC – Quantity of TRX hardware activation should be same as no of TRXs defined in BSC – Common TRX HW activation license for Flexi Compact ,Flexi Multiradio BTS and Flexi Multiradio 10 BTS

• GSM BTS Power License 20W step: Code BSC00548 – Flexi Multiradio 3 sector 90W Triple RFM, High Power RRH (2x60W) and Flexi Compact BTS are delivered with all three branches activated with

Power Sectors

20W o/p power limit License implemented in BSC Common LK for 3x90 W RF (FXCB,FXDB,FXEB,FXFC)and 60W+60W RRH (i.e.FHxB ) Default 20W power license would be available with Each Pipe Step size – incremental by 20W per step Additional Power Licenses are required in 20W incremental steps – per branch if more output power is needed

– – – – –

1 11 111

20W 0 0 0

40W 1 2 3

60W 2 4 6

Power Licenses

# of Power licenses

6

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

80W 3 6 9

RF Configurations with single RF Module with 3x90W Triple RF Module 2 way diversity, 6 antenna ports/module

TX RX main

RM MCPA RXMC

LNA

RX div

RX

1 x Pol antenna per sector

LNA

Output Power TX

2/2/2 @ 40W per TRX

RX main

5/5/5@16W per TRX

RX main

MCPA RXMC

LNA

RX div

*12 W support will come with EX4.2 MP2 RP3 7

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

LNA

RX

6/6/6 @ 11.4*W per TRX

LNA

RX div

TX

LNA

Duplexer

4/4/4 @ 20W per TRX

RXMC

RX

3/3/3 @ 26.6W per TRX

MCPA

X

Duplexer

1/1/1 @ 80W per TRX

X

Duplexer

Up to 6/6/6 with 1 Radio Module

Cross polarized antennas

X

Antenna Optimized Configuration Single band RF Configurations with 2 x 90W Triple RF Modules (one sector shown)

1 x XPol antenna per sector**

TX RP3

RX main

Output Power

RM1 MCPA RXMC

LNA LNA

RX div

Duplexer RX

Chained or unchained RMs

2/2/2 @ 80W per TRX 6/6/6 @ 26.6W per TRX

TX RP3

RX main

8/8/8* @ 20W per TRX

RX div

RM2 MCPA RXMC

LNA LNA

Antenna Optimized Configuration - The sectors are spread over 2 RMs to allow maximum availability -If one RM becomes unavailable, the total traffic gets reduced and RX Diversity would be lost - Considering 35MHz IBW

* With ESMC/FSMG/FSMF **Both the branches must be tuned to the same RF Frequency Range

8

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

Duplexer RX

4/4/4 @ 40W per TRX

X

Flexi Multradio Radio Module – FXEB,FXDB,FXCB& FXFC and FHDB and FHEB RG301565 (5W Output Power step size for Flexi Multiradio BTS) No of Carrier(s) per PA (or Branch ) No of Carrier(s) per PA (or Branch )

1 80W 75W 70W 65W 60W 55W 50W 45W 40W 35W 30W 26.6W 25W 20W 16W 15W 12W 11.4W 10W

2

3

4

5

6

40W 35W 30W 26.6W 25W 20W 16W 15W 12W 11.4W 10W

26.6W 25W 20W 16W 15W 12W 11.4W 10W

20W 16W 15W 12W 11.4W 10W

16W 15W 12W 11.4W 10W

12W 11.4W 10W

5W

5W

5W

5W

5W

5W

FHxB(2x60W RRH) 1

2

3

4

30W 25W 20W 15W 13.3W 12W 10W 8.5W 7.3W 5.1W

20W 15W 13.3W 12W 10W 8.5W 7.3W 5.1W

15W 13.3W 12W 10W 8.5W 7.3W 5.1W

5

6

60W

Output Power Options

Output Power Options

FXxB(3x90W RFM)

FXEB,FXDB,FXCB& FXFC

55W 50W 45W 40W 35W 30W 25W 20W 15W 13.3W 12W 10W 8.5W 7.3W 5.1W

12W 10W 8.5W 8.5W 7.3W 7.3W 5.1W 5.1W

FHDB and FHEB

Flexi Multiradio BTS Radio Module Output Power tolerance is +/- 0.8 dBm (Normal Condition) and +/- 1.3 dBm Extreme condition .Using Low Output Power please consider the Output Power tolerance as well Note :RG301565 support will be available in EX4.2 EP1 for 3x90W RFM and EX5.0 EP1 for 60+60W RRH1 9

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

Expansion of Existing Multiradio Site with new Radio Modules

3x90W RFM max Output Configuration Power 1/1/1 60W 2/2/2 30W 4/4/4 20W 5/5/5 15W 5/5/5 12W 6/6/6 10W

TX RP3

RX main

MCPA RXMC

RM1 LNA LNA

RX div

FXxA

X TX RP3

RX main RX div

MCPA RXMC

RM2 LNA LNA

Duplexer RX

3x70W RFM max Output Configuration Power 1/1/1 60W 2/2/2 30W 3/3/3 20W 4/4/4 15W 5/5/5 12W 6/6/6 10W

X Duplexer RX

• 3x70W RFM expansion is possible with 3x90W RFM • 2x40 W RRH expansion is possible with 2x60W RRH • IBW of Both Radio should be same for Antenna optimized configuration • Output for should be common for FXxA and FXxB Radio Module • FXxA Chaining with FXxB • Configuration Example Below

FXxB

Max Configuration 2/2/2@60W 4/4/4@30W 7/7/7@20W 9/9/9@15W 10/10/10@12W 12/12/12@10/12*W

Note : Radio Module and Remote Radio head can not be shared in one sector but RRH can be used with Triple RFM for Sector Addition *12 W support will come with EX5.0 EP1 10

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

Single RAT power Levels, GSM GSM output power per carrier Number of Output power per carriers carrier W dBm 1 80 49,0 2 40 46,0 3 26,6 44,3 4 20 43,0 5 16 42,0 6 12 40,8

11

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

Total output power W 80 80 80 80 80 72 Note! 12W+12W+12W+12W+12W+12W

TX and RX Diversity with 2 RFMs (with FXEB*) Operator Frequency Allocation spread within 75 MHz BW duplex spacing RF Branch 1

Tx1/Rx1

75 MHz FE Filter

diversity for branch 2 via branch 1 RF Branch 2 RF Branch 2

Tx2/Rx2

75 MHz of FE Filter

RDSA Kit Rx main diversity for branch 1 via branch 2

Rx main

35 MHz

Full band Rx diversity sharing using RDSA cable In the uplink, it is possible to cover 75 MHz band, including Rx diversity Two MAL List have to be defined For SFH DFCA support possible with two CA List Antenna Hopping and BB hopping will not be possible

* The same concept is applicable with 1900 band RFM (FXFC) 12

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

Tx main

35 MHz

Total 75 MHz usable for RX diversity

• • • • •

Tx main

5 MHz Gap

TX and RX Diversity with 2 RFMs (with FXEB*) Operator Frequency Allocation spread within 60 MHz BW duplex spacing

RF Branch 1

RF Branch 2 RF Branch 2

Tx1/Rx1

Tx2/Rx2

diversity for branch 2 via branch 1

diversity for branch 1 via branch 2

75 MHz FE Filter

Rx main Tx main

35 MHz

35 MHz

10 MHz usable for IDD TX diversity

In the uplink, it is possible to cover 60 MHz band, including Rx diversity In the downlink, only those frequencies which lie within the overlapping 10MHx TX can be used for IDD TX Diversity Two MAL List have to defined For SFH DFCA support possible with two CA List Antenna Hopping and BB hopping Possible

* The same concept is applicable with 1900 band RFM (FXFC) 13

Tx main

Rx main

Total 60 MHz usable for RX diversity

• • • • •

75 MHz of FE Filter

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W

Flexi Multiradio 10 BTS Power Consumption New Modules FXDB 80W 70W 60W 50W 40W 35W 30W 26.6W 25W 20W 16W 15W 12W 11.4W 10W 5W

FXEB 80W 70W 60W 50W 40W 35W 30W 26.6W 25W 20W 15W 12W 10W 5W 14

© Nokia Siemens Networks

low band RFM 2 Pipe 1 Pipe 50% RF 100% RF 50% RF 100% RF Load Load Load Load 452 671 284 392 281 370 436 626 408 582 266 349 388 537 251 328 242 306 368 492 235 289 349 460 341 445 233 282 225 271 344 436 223 266 324 412 214 256 314 391 212 245 302 368 298 361 211 241 207 235 305 361 206 234 291 346 202 223 279 326 198 219 275 315 high band RFM 1 Pipe 2 Pipe 50% RF Load 308 288 278 262 243 236 229 223 220 212 205 201 195 188

100% RF Load 411 382 354 326 300 284 272 262 243 227 227 222 211 200

50% RF Load 491 461 436 407 379 362 350 339 333 320 303 298 286 275

Flexi Multiradio BTS / Flexi RFM 90W

100% RF Load 732 671 611 553 498 466 440 419 408 379 348 337 318 290

3 Pipe 50% RF 100% RF Load Load 626 955 595 887 562 818 524 749 488 680 465 633 457 608 480 619 428 559 409 528 394 493 390 482 415 499 377 459 362 430 353 412 3 Pipe 50% RF Load 708 659 613 566 520 496 475 459 449 425 403 393 378 356

100% RF Load 1069 970 878 787 701 654 612 581 563 519 471 453 425 381

Power Consumption examples for GSM Full Power levels at 25°C. No transmission Idle Power consumption for FXxB RFM is 125W.

SW support plan for different radio variants GSM/EDGE System Module (ESMB/ESMC) EX Branch

Flexi Multiradio System Module (FSML/FSMG/FSMF) GF Branch

FXDA (900)

EX3.1, RG10

GF1.0 , RG20 EP2

FXDJ (900J)

EX3.1 MP1, RG10

GF1.0 , RG20 EP2

FXEA (1800)

EX3.1 MP1, RG10

GF1.0 , RG20 EP2

FXCA (850)

EX3.1 MP2, RG10

GF1.0 , RG20 EP2

FXFA (1900)

EX3.1 MP2, RG10

GF1.0 , RG20 EP2

FXFB (1900)

EX4.1 MP1, RG20 EP1

GF1.0 , RG20 EP2

FXDB (900)

EX4.2 EP1, RG20 EP2

GF1.0 , RG20 EP2

FXEB (1800)

EX4.2 EP1, RG20 EP2

GF1.0 , RG20 EP2

FXCB (850)

EX5.0EP1, RG30

GF2.0, RG30 EP1

FXFC (1900)

EX5.0EP2, RG30

GF2.0, RG30 EP1

Hardware variants

Flexi MR RFM 3*70W

Flexi MR RFM 3*90W

15

© Nokia Siemens Networks

Flexi Multiradio BTS / Flexi RFM 90W