eQ PRIME Air Handling Unit The right choice
PRIME
PRIME
What benefits does eQ PRIME give you? eQ PRIME is a simple solution
Capital cost savings!
Energy cost savings!
➜ Save costs by value engineering
➜ Save energy by efficient design
➜ Reduce plantroom size/steelworks
➜ Highest energy recovery devices
➜ Reduce cooling loads (Chillers)
➜ Removed or reduced cooling machines
to many of your engineering problems Cost effective Energy saving Simple installation
➜ Reduce heating loads (Boilers)
Quick delivery
➜ Reduce airflow and AHU cost
Packaged controls
➜ Reduce ducting size and cost
Space saving
➜ Many more possible savings to suit your projects
Integrates with the BMS
➜ Reduced or removed boilers ➜ Energy monitoring controls ➜ Reduced airflow ➜ New lowest energy fan (Centriflow plus with PM-motor)
Start-up by Fläkt Woods
➦➦➦➦ NEEDS
SELECTION
DELIVERY
START-UP
OPERATION
eQ PRIME – The right choice! 1) Choose the optimal size according to air volume. eQ PRIME 0,36
3,6
7,2
10,8
14,4
18
21,6
25,2
28,8
3 3 /h/h 32,4 x1000 x 1000mm
050 041 032 023 018 011
Max flow SFPv ≤ 2 kW, m3/s Max flow, m3/s
008 005 0
2
1
2
3
4
5
6
7
8
Flow
9 m3/s
Size 005 – 018, with control unit on the roof
Duct connection
2) Dimensions, weight
and connection dimensions are
Height
shown in the table below.
h
dth
Wi
Size 023 – 050, with integrated controller in the rotor
Lengt
Duct connection
2) Dimensions, weight Height
dimensions are
and connection shown in the table below.
Length
th
Wid
Unit size
Nominal airflow m3/s
Fan
Length, mm
Width, mm
Height, mm
Longest block length, mm
Duct connection, mm
Approx. Weight, kg
5
0.40
Small
1800
800
952
700
500 x 300
310
0.65
Small
1800
0.80
Large
1800
800 x 400
420
1.1
Small
1900
1.3
Large
2000
800 x 400
530
1.8
Small
2100
2.0
Large
2200
1100 x 500
660
2.9
Small
2800
3.3
Large
2900
1400 x 600
1100
3.6
Small
3000
4.2
Large
3100
1400 x 800
1250
4.6
Small
3150
5.3
Large
3250
1700 x 800
1500
Small
3550
Large
3650
2000 x 800
1800
8 11 18
23 32 41 50
5.9
1100
1152
1200
1352
1400
1552
1700
1852
1800
2052
2000
2152
2300
2452
700 700 700 750 750 800 950 1000 1000 1050 1050 1100 1250 1300
Unit length is a guide based on standard filter. ACON selection program gives exact data. Subject to alteration.
3
New!
Control and adjust
The Semco Rotary energy recovery device
Intelligent control system building management s performance and energ
The Semco Rotary device is a market leader and will provide considerable cooling and heating reductions.
New! PM Motor Fan set The New permanent magnet motors provide the highest energy efficient savings, helping to lower SFPv!
Connection Rectangular duct connections are available for quick duct fitting
Base frame Designed to simplify installation and reduce on-site costs. The unit is delivered ready-mounted on a single baseframe, with the option of separating the unit if necessary.
4
tment system
PRIME
m which interfaces with the systems a providing optium gy monitoring for the AHU.
Display IP65 The Hand held controller is designed to be simple to use and its magnetic backing allows you to easily attach and remove the controller.
Filter Class F7 supply/extract air filter for a clean indoor environment and protection of unit interior. Glass fiber extra low pressure drop.
The eQ Prime control and adjustment system has the following standard functions
• Energy saving summer night cooling function • Fan flow control (CAV) • Temperature regulation control • Control of accessories, heating/cooling coils etc. • Cooling recovery • Filter monitoring • BMS (controls) interface options • Free and comprehensive web server schematic • Input: extended or forced operation via external switches
• Input: external fire alarm • Alarms functions See list of accessories on page 6 for more functions.
Subject to alteration.
5
PRIME
eQ PRIME offers full flexibility eQ PRIME offers full flexibilty when it comes to heating and cooling coils. Coils for duct mounting are available for selection in Acon (web selection program) in a wide range of sizes and configurations. Cased coils offer the advantage that you can be sure that specified performance is delivered and avoids a lot of the installation work involved in supporting, connecting and insulating duct coils. In addition, you can choose to have an inspection section with the coils. Coils placed after the fan section are put under positive pressure helping to remove condence.
Duct components and accessories Optional Accessories The following accessories can be delivered with the unit: Adjustable feet for base frame Fan pressure control (VAV) Heating coil Damper
Façade and room sensors for night cooling or night heating functions Timer for extended or forced operation
For your convenience, the unit can be delivered with the following duct components: Parts for ducts Dampers with actuator, two positions with spring. Heating coil with frost protector, valve and actuator.
Frost protector for heating coil (NB: Frost protector included if unit is delivered with heating coils) CO2-sensor PIR Movement detector including room lighting control function Zone control Control of extract air fan
Cooling coil with valve and actuator.
Smoke detector and fire damper with accompanying control unit
6
The eQ PRIME unit The unit can be transported to the plantroom either complete or in blocks where access is limited. The blocks are easy to assemble.
Subject to alteration.
7
We help you get started!
Unit commissioned by:
Please contact your local Fläkt Woods service department
Fast, Easy and Safe > Fläkt Woods takes care of
the commissioning and initial startup of your units.
> Your design to site performance.
This is a valuable service for our customers since we customise the unit’s control system settings, thus ensuring energy-efficient operation and maximising the units’ life. The operative words are Fast, Easy and Safe, so you can confidently allow Fläkt Woods to take care of everything from the order through to delivery and startup.
For safe, Optimal operation, We help you to: > Set operating periods and setpoints in the control unit
> Check that installation has been performed correctly
> Adjust the controllers to ensure even, economical control
> Set alarm parameters to customer requirements
8
Commissioning of eQ PRIME – How it works
Simple ordering using the Acon product selection program or via your local sales office Prior to commissioning, the installation completion checklist should be sent to Fläkt Woods A preliminary appointment is made with your nearest local commissioning team Request placed with Fläkt Woods Technical Sales Support (TSS) Control Systems (CS) We contact you to make a definite appointment Commissioning carried out. Setpoints and operating periods are set according to your requirements You receive a report after the commissioning is completed
Acon powerful and easy product selection Acon is our tool for the selection and planning of air handling units. This is a web-based program that is updated regularly without the user having to download and install updates. Acon gives you all this information and support required for good planning.
Product dimensions
Noise data
Efficiency LCC
Delivery time
Dxf and Dwg files can be exported to CAD software Support is available for Autodesk´s i-drop Documentation always up to date
Subject to alteration.
9
Control equipment Simplicity
Quick installation
The eQ PRIME has been developed to be easy to design,
The eQ PRIME is self-contained and requires no major on-
install and use. The integrated control equipment is
site electrical installation. The control equipment is ready
supplied programmed, configured and tested, together
to go as soon as the unit is installed. A true Plug and Play
with all the necessary field components. The control
Air handling unit.
system conforms to EU directives (MD, EMC and LVD) and is CE marked. The eQ PRIME is the perfect solution for both small installations with straightforward control functions, and also for large installations with data communication requirements.
High quality The production of the eQ PRIME is characterized by a rigorous quality assurance system to ensure an approved and electrically safe product. Naturally the standardized design is also a guarantee of cost effectiveness, reliability and high quality.
eQ Smart web The eQ Smart web constantly monitors the health, readiness and performance of the eQ by staying in control of the unit 24/7, 365 days a year!
> Project unique flow chart with real time values. > Adjust set points, scheduler, exception calendar etc convenient from remote.
> Trend log for follow up and optimization. > E-mail client for alarms. > Reducing emergency visits. > Minimizing downtime. > Easy installation.
10
Fläkt Woods a provider for all your needs Fläkt Woods is a provider of many products and systems for a wide range of specialized market sectors. Please see a few of these products below. Solutions for all your air climate and air movement needs Fläkt Woods is a global leader in air management. We specialise in the design and manufacture of a wide range of air climate and air movement solutions our collective experience is unrivalled. Our constant aim is to provide systems that precisely deliver required function and performance, as well as maximise energy efficiency.
Air Terminal Devices and Ducts Controls and drives
Air Handling Units (AHUs)
Chilled Beams
Chillers Fans
Acoustical Products
Residential ventilation Energy recovery
Save energy, your economy and the environment with Fläkt Woods Energy optimisation is an important aspect of ventilation where Fläkt Woods has widely recognised expertise. We use highly rational e3 products and solutions, which serve the dual purpose of saving both the environment and your long-term economy.
ENERGY EXPERTISE ENVIRONMENT
Fläkt Woods has the capability to combine energy efficient (e3) products into fully integrated (i3) systems.
www.flaktwoods.com Subject to alteration.
11
We Bring Air to Life Fläkt Woods is a global leader in air management. We specialize in the design and manufacture of a wide range of air climate and air movement solutions.
FWG-eQ PRIME
GB 2012. 09-9034
© Copyright 2012 Fläkt Woods Group
Condesign Infocom AB +46 36 291 42 10
Our collective experience is unrivalled. We are constantly aiming to provide systems that precisely deliver required function and performance as well as maximum energy efficiency.
Fläkt Woods Group SA 18, avenue Louis Casaï, CH-1209 Geneva, Switzerland Tel. +41 22 309 3800 email
[email protected] www.flaktwoods.com See global website for international sales offices www.flaktwoods.com
