Fujitsu Semiconductor Europe Factsheet MB86R11 & MB86R12 ‘Emerald’ SoC Family System Solutions for Next...
Fujitsu Semiconductor Europe Factsheet MB86R11 & MB86R12 ‘Emerald’ SoC Family
6x UART 2x SPI
System Solutions for Next Generation Automotive Systems
Gen. Purpose Bus 16/32-bit
5x I2C
32ch DMA
DDR2/3-800 x32,1GB
ARM® NeonTM SIMD
PWR Mgmt Watchdog
ARM® CortexTM-A9
Timer
4x I2S 12x PWM
8x ext. IRQ
6x UART 2x SPI
1x IDE66
5x I2C
3x SD/MMC
4x I2S
2x USB
12x PWM
IrDA
2x ADC
Gen. Purpose Bus 16/32-bit
PWR Mgmt Watchdog
ARM® CortexTM-A9
Timer
533MHz
2x ADC TS I/F
L2 Cache 128k
Internal 64k SRAM
TCON
Ruby Core
Video Capture
3D Engine
122x GPIO
TS I/F
IrDA L1 ICache 32k
L2 Cache 128k
L1 DCache 32k
Image Processor
Dithering Gamma
Video Capture Display Ctrl RGB
Image Processor
OpenGL® ES 2.0
Display Ctrl RGB/RSDS APIX2®
Dithering Gamma
Display Ctrl RGB APIX2®
Video Capture IRIS Core
IRIS Core
2D Engine
Video Capture
SIG Unit
MediaLB® 25/50
Ethernet
Main processor ■ ARM Cortex A9 ■ 2.5 DMIPS/MHz ■ R11: 400MHz (automotive) ■ R12: 533MHz (automotive) ■ 32kB D-/I-cache ■ 128kB L2-cache
2D Engine
Video Capture
2 x CAN
LIN
Block diagram MB86R11 ’Emerald-L’
An ‘Emerald’ device is a System-on-Chip (SoC) that combines the latest ARM® CortexTM A9 CPU core with four video inputs, up to three parallel display outputs and various standard and automotive-specific peripheral interfaces for a wide range of applications. Rendering performance using their independent 2D and 3D graphics engines, positions the ‘Emerald’ devices as industry leaders in graphics controller chips for automotive applications.
Display Ctrl RGB
SIG Unit
MediaLB® 25/50
Ethernet
122x GPIO
TCON
3D Engine 266MHz
OpenGL® ES 2.0
Video Capture
2 x CAN
Internal 64k SRAM
Ruby Core
APIX2®
200MHz
Video Capture
1x IDE66
Timer
Video Capture
Display Ctrl RGB/RSDS
8x ext. IRQ
3x SD/MMC
Timer L1 DCache 32k
DDR2-800/3-1066 x32,1GB
ARM® NeonTM SIMD
400MHz
L1 ICache 32k
32ch DMA
Display Ctrl RGB APIX2® LIN
Block diagram MB86R12 ’Emerald-P’ ■ ■
Rotate, blend, scaling and copy Extra 300 MPix/s for 2D
■ ■ ■
3D Graphics processor ■ Unified shader 3D engine ■ OpenGL ES 2.0 ■ OpenVG support
■ ■ ■ ■ ■
High memory bandwidth ■ DDR2/3-800 (400MHz) (R11+ R12) ■ DDR3-1066 (533MHz) (R12) ■ Bus width x 16/ x 32, 1GB ■ NAND, mNAND, NOR Image processor Hue, colour, brightness, contrast enhancement
■
Multiple video capturing 4x Video Inputs ■ ITU601/656, RGB666/RGB888 ■ 1x APIX 2.0 Rx (R12) ■ 360° wraparound view support
SIMD engine ■ ARM NEON ■ General-purpose SIMD engine ■ Accelerates multimedia and signal processing algorithms
■
2D Graphics processor ■ Independent 2D graphics engine
■
Multiple display output 3 independent channels ■ Flexible resolution up to 1600 x 1200
■
Refresh rates up to 100Hz RGB/ITU RSDS/TTL 3 x APIX 2.0 Tx (R12) 8-fold layer per controller DualView display support Integrated TCON Signature unit (checksum) Dithering, gamma correction
Standard peripherals 5 x I2C ■ 4 x I2S (2 channels/port) ■ 2 x SPI, 1 x Quad-SPI ■ 6 x USART/UART ■ 3 x SDIO/MMC ■ 1 x USB (Host / Func) (R11) ■ 1 x USB Host (R11) ■ General purpose bus (32/16-bit) ■ 122 x GPI/O ■ 12 x PWM ■ 2 x 12-bit-ADC ■ 1x IrDA ■ 1x TS interface ■ 1x IDE66 (ATA/ATAPI-5) ■ Ethernet (10/100/1000) ■
Page 1 of 2
Factsheet Fujitsu MB86R11 & MB86R12 ‘Emerald’ SoC Family
Automotive I/F ■ 2 x CAN ■ 1 x MediaLB 25/50 ■ APIX 2.0 (R12) Package ■ BGA544, TEGBA544 (R12) ■ 1.0 ball pitch ■ Ta: -40 to +85°C (R12: higher with limitations) ■ AEC Q100 Samples ■ MB86R11: Available ■ MB86R12: Available Evaluation board ■ Modular Starter kit ■ CPU Board with the SoC ■ Base-board providing the connectors and interfaces BSP Software
CGI Studio scene composer
Operating system support ■ Linux (including fast boot mechanism) ■ QNX (tbd), Integrity (tbd)
CGI Software
Candera 3D engine Full support of OpenGL 2.0 ES feature set ■ 3D Animation framework ■ OS & application independent ■ Hardware independent ■
CGI Studio ‘Scene Composer’ Modern 2D/3D HMI scene editing for automotive applications
■
Companion Solutions Automotive system FCR4 Family ■ ARM Cortex R4 series ■ 2D graphics engine ■ Embedded VRAM ■ Safety and security features ■ 6 stepper motor control ■ Standard and automotive I/F (CAN, Ethernet) Automotive Pixel Link (APIX) ‘Indigo’ family MB88F33x ■ Host I/F via SPI or APIX sideband link ■ Sprite based graphic display controller with APIX Rx I/F ■ Embedded TCON ■ Embedded flash and SRAM ■ Multiple stepper motor controllers ■ ADC, PWM, I2C, GPI/O, UART
All company and product trade marks and registered trade marks used throughout this literature are acknowledged as the property of their respective owners.
Page 2 of 2
CGI Studio ‘Player’ Application development & verification ■ Widget design & verification ■
Evaluation board
Candera 2D engine Customisable effects on scene graph nodes like shadows and transparency ■ 2D animation effects (scale, rotate and translate) ■ 2D scene composition support ■ Supports interaction with Candera 3D engine ■
Modular starter kit MB86R11 Emerald-L Starterkit (SK-86R11-01)
[email protected] http://emea.fujitsu.com/semiconductor FSEU-G09-05SEP2011
