Fortacero Catalogo 2018

June 8, 2019 | Author: francisco | Category: Notation, Length, Units Of Measurement, Nature
Share Embed Donate


Short Description

fortacero...

Description

En  dedicamos nuestro mayor esfuerzo en ser la mejor opción para nuestros clientes en cuanto a existencia y variedad de productos, pretendiendo siempre cumplir con sus requerimientos. Contamos con instalaciones i nstalaciones en Monterrey, Mon terrey, Ciu Ciuda dadd de México, GuadalaGu adala jara, Tijuana, Mexicali, Hermosillo, Saltillo, S altillo, Laguna, San Luis Potosí, Potos í, León, Querétaro, Puebla y Veracruz entre las cuales mantenemos permanentemente más de 180,000 toneladas en inventario. En este folleto presentamos los más de 1,000 diferentes productos (entre tipos y diversas medidas) que manejamos en stock y de los cuales hemos demostrado mantener constanteme constantemente nte en existencia al menos un 98% de ellos.

PlacaTemper PlacadeHoja Lámina YPlaca Antiderrapante/ Galvanizada Canales / IPS Vigas IPR/ Vigas W Ángulos Soleras Redondos/ Cuadrados Rejilla Electroforjada / Polin PTR HSS Tubería Infraestructura / Ubicaciones Servicios

02 04 05-06 07 08 09-11 12 13 14 15 16-17 18 19 20 21

ÍNDICE

02

Capacidad: 3/4" de espesor 8' (100" max.) de ancho  40 Tons. peso de rollo Cedencia: hasta 100,000 psi en 1" hasta 120,000 psi en 1/2"

Placa Temper(VENTAJAS) Elimina el efecto memoria (springback) generado por esfuerzos residuales. Corte a largo especial. Espesor real cercano al nominal, no pague más kilos por la misma pieza. Cumple con tolerancias m s cerradas en planeza (1/2 ASTM), espesor, descuadre y longitud. Mejora la procesabilidad de la placa en cortes con pantógrafo, laser o plasma. Mejora el acabado superficial del material.

03

PLACA TEMPER  Placa superior en planeza

Placa libre de memoria

Características de Producto Terminado Planeza: 50% de la Norma ASTM A6 y A568 Corte a Longitud: 48" a 600" Precision de: Corte +/-1/8". Descuadre: 1/8"

PLACA TEMPER 

04

Solicite otras dimensiones y grados

PLACA DE HOJA  ESPESOR Pulgada

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/2 4 4 1/2 5 5 1/2 6

0.187 0.250 0.312 0.375 0.437 0.500 0.562 0.625 0.750 0.875 1 1.125 1.250 1.375 1.500 1.625 1.750 2 2.250 2.500 2.750 3 3.500 4 4.500 5 5.500 6

 A-36, A-283°C, A-285°C, A-285°C, A-516°70,  A-572°50, A-709°50, A-572°65, SAE 1045

PESO mm.

4.8 6.3 7.9 9.5 11.1 12.7 14.3 15.9 19.0 22.2 25.4 28.6 31.7 34.9 38.1 41.3 44.4 50.8 57.1 63.5 69.8 76.2 88.9 101.6 114.3 127.0 139.7 152.4

PESOS POR PLACA EN KILOS

Kg/m2   Kg/pie2 3’ X 6’ 3’ X 8’ 3’ X 10’ 4’ X 8’ 4’ X 10’ 5’ X 10’ 5’ X 20’ 6’ X 20’ 6’ X 40’ 8’ X 20’ 8’ X 40’ 10’ X 40’

MM.

37.78 50.38 62.97 75.56 88.05 100.75 113.24 125.94 151.12 176.31 201.50 226.69 251.88 277.06 302.25 327.44 352.62 403.00 453.38 503.75 554.12 604.50 705.25 806.00 906.75 1,007.50 1,108.25 1,209.20

4 5 6 7 8 9 11 12 14 16 19 21 23 26 28 30 33 37 42 47 51 56 66 75 84 94 103 112

--------------211 253 --337 -----------------------------------

*84 *112 *140 *168 --*225 --281 337 --449 --562 --674 ----899 ---------------------

105 140 176 211 *246 281 *316 351 421 *491 562 632 702 --842 --983 1,123 1,264 1,404 --1,685 -------------

*112 *150 *187 *225 --*300 --374 449 --599 --749 --899 ----1,198 ---------------------

140 176 351 421 187 234 468 562 234 293 585 702 281 351 702 842 ------- *983 374 468 936 1,123 ------- 1,264 468 585 1,170 1,404 562 702 1,404 1,685 ------- 1,966 749 936 1,872 2,246 ------- 2,527 936 1,170 2,340 2,808 --------1,123 1,404 2,808 3,370 ----------- 1,872 --- 3,931 1,498 --- 3,744 4,493 1,685 ----- 5,054 1,872 ----- 5,616 --------2,246 ----- 6,739 ----- 6,552 7,935 ----- 7,448 9,069 ------------------------------- 13,478

------1,685 --2,246 --2,808 3,370 --4,493 --5,616 -------------------------------

562 749 936 1,123 --1,498 --1,872 2,246 2,621 2,995 3,370 3,744 4,118 4,493 4,867 5,242 5,990 6,739 7,488 8,237 8,986 10,483 11,981 13,478 14,976 16,474 ---

1,123 ----2246 --2,995 --3,744 4,493 --5,990 6,739 7,488 --8,986 ----11,981 ---------------------

-------

2,808

---

3,744

---

4,680 5,616

* Estos materiales se cotizan sobre pedido

PLACA VARIOS x VARIOS • • • •

3/16 - 6” Placa con dimensiones no standard. Sin certificado. Garantizamos que dobla a 90 o

---

7,488

PLACA 

-----------------------------------

05

LÁMINA CALIENTE DECAPADA Y SIN DECAPAR  ESPESOR

KG/HOJA 

PESO

CALIBRE Pulgada mm. 7 8 9 10 11 12 13 14 16 18

0.180 0.165 0.150 0.135 0.120 0.105 0.090 0.075 0.060 0.048

3’ X 8’ 3’ X 10’ 4’ X 8’

4.572 81 101 4.191 74 93 3.810 67 84 3.429 61 76 3.048 54 67 2.667 47 59 2.286 40 51 1.905 34 42 1.524 ------- ------1.219 ------- -------

108 99 90 81* 72* 63* 54 45* 36 29

* También se manejan en grado A1011 CS

4’ X 10’ 5’ X 10’ 5’ X 20’ 135 124 112 101* 90* 79* 67 56* 45 36

------155 ------126 112 98 ------70 -------------

------309 ------253 225 197 ------140 -------------

Kg/m2 36.27 33.25 30.23 27.20 24.18 21.16 18.14 15.11 12.09 9.67

Contamos con servicio de corte a largo especial

PLACA DE ROLLO ESPESOR Pulgada 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

0.187 0.250 0.312 0.375 0.437 0.500 0.562 0.625 0.750

PESOS POR PLACA EN KILOS mm. 3’ X 8’ 3’ X 10’ 4’ X 8’

4’ X 10’ 5’ X 10’ 5’ X 20’ 6’ X 20’ 8’ X 20’

Kg/m2

4.8 84 105 112 112 140 150 6.3 7.9 140 176 187 9.5 168 211 225 11.1 ------- ------- ------12.7 225 281 300 14.3 ------- ------- ------15.9 281 351 374 19.0 337 421 449

140 187 234 281 ------374 ------468 562

37.78 50.38 62.97 75.56 88.05 100.75 113.24 125.94 151.12

Manejamos también anchos irregulares de 38¨a 98¨ con mayor descuento ¡ Pregunta a tu ejecutivo !

176 234 293 351 ------468 ------585 702

351 468 585 702 ------936 ------1,170 1,404

421 562 702 842 982 1,123 1,262 1,404 1,685

562 749 935 1,123 ------1,498 ------1,872 2,246

LÁMINA 

    A     C     A     L     P     /     A     N     I     M      Á     L

06

LAMINA Y PLACA DE GRADO

 A-285ºC, A-516º70, A-572º50, A-572º65 Y SAE 1045 ESPESOR

KG/M

KG/HOJA 

 

PESO

CALIBRE Pulgada 14 12 10 3/16 1/4 5/16 3/8 1/2 5/8 3/4

mm.

3’

4’

5’

0.075 1.905 13.82 ------- ------0.105 2.667 ------- 25.80 ------0.135 3.429 ------- 33.17 ------0.187 4.750 ------- 45.94 57.43 0.250 6.350 ------- 61.42 76.77 0.312 7.925 ------- 76.65 95.81 0.375 9.525 ------- 92.13 115.16 0.500 12.700 ------- 122.83 153.54 0.625 15.875 ------- ------- 191.93 0.750 19.050 ------- ------- 230.31

6’

8’

------------------68.91 92.13 114.97 138.19 184.25 230.31 276.38

4’ X 20’ 5’ X 20’ 6’ X 20’ 8’ X 20’ Kg/m2

------- ------- ------- ------- ------- 15.11 ------157 ------- ------- ------- 21.16 ------202 ------- ------- ------- 27.20 350 ------280 420 ------- 37.68 468 122.83 374 562 749 50.38 584 153.30 467 701 935 62.87 184.25 562 842 1,123 75.56 702 245.67 749 936 1,123 1,498 100.75 307.09 ------- 1,170 1,404 1,872 125.94 368.50 ------- 1,404 1,685 2,246 151.13

Contamos con servicio de corte a largo especial

LÁMINA EN FRÍO ESPESOR

KG/HOJA 

PESO

CALIBRE 11 12 14 16 18 20 22 24 26

Pulgada.

mm.

3’ X 8’

3’ X 10’

4’ X 8’

0.120 0.105 0.075 0.060 0.048 0.036 0.030 0.024 0.019

3.048 2.667 1.905 1.524 1.219 0.914 0.762 0.610 0.493

34 27 22 16 13 11 9

42 34 27 20 17 13 11

72 63 45 36 29 22 18 14 -

4’ X 10’ 90 79 56 45 36 27 22 18 -

Kg/m2 24.18 21.16 15.11 12.09 9.67 7.25 6.05 4.84 3.57

LÁMINA 

07

Contamos con servicio de corte a largo especial

LÁMINA ANTIDERRAPANTE ESPESOR

KG/HOJA 

PESO

CALIBRE 14 12 1/8 3/16 1/4 3/8

Pulgada

mm.

3’ X 10’

0.075 0.105 0.125 0.188 0.250 0.375

1.905 2.667 3.175 4.775 6.350 9.525

51 71 84 118 153 -------

4’ X 10’ MM. 68 95 112 158 204 297

5’ X 10’

5’ X 20’

Kg/m2

------------139 197 255 -------

------------279 395 510 -------

18.31 25.63 30.02 42.47 54.92 79.82

GALVANIZADA LISA  CALIBRE 14 16 18 20 22 24 26

ESPESOR

KG/M LINEAL

PESO/HOJA (KG)

mm.

Pulgada

3’

4’

3’ x 8’

3’ x 10’

4’ x 8’

4’ x 10’

1.935 1.557 1.252 0.950 0.798 0.569 0.493

0.0762 0.0613 0.0493 0.0374 0.0314 0.0224 0.0194

13.87 11.15 8.97 6.80 5.70 4.06 3.52

18.50 14.87 11.96 9.06 7.60 5.42 4.69

34 27 22 17 14 10 9

42 34 27 21 17 12 11

45 36 29 22 19 13 11

56 45 36 28 23 17 14

Se manejan en grado G-60.

LOSACERO25/Sección 4 CALIBRE 22

ESPESOR mm.

Pulgada

PESO kg / m2

0.759

0.0299

8.33

Manejamos en 6 y 12 metros de largo, solamente en paquetes de 1 tonelada.

LÁMINA 

    A     C     A     L     P     /     A     N     I     M      Á     L

08

CANALES PERFIL

ESPESOR DEL ALMA 

PESO

PULGADA 

MM.

KG/M

3

76.2

4

101.6

5 6

127.0 152.4

7 8

177.8 203.2

10

254.0

12

304.8

15

381.0

  5.20   6.10   6.70   8.04   9.97 12.20 15.63 19.35 14.60 17.11 20.46 27.90 22.76 29.76 37.20 44.64 30.80 37.20 44.64 50.40 59.53 74.50

LBS/FT PULGADA  3.50 4.10 4.50 5.40 6.70 8.20 10.50 13.00 9.80 11.50 13.75 18.75 15.30 20.00 25.00 30.00 20.70 25.00 30.00 33.90 40.00 50.00

1.372 1.410 1.584 1.584 1.750 1.920 2.034 2.157 2.090 2.260 2.343 2.527 2.600 2.739 2.886 3.033 2.942 3.047 3.170 3.400 3.520 3.716

MM.   PULGADA  MM. PULGADA  35 36 40 40 44 48 51 55 53 57 59 64 65 69 73 76 74 77 80 86 89 94

0.273 0.273 0.296 0.296 0.320 0.343 0.343 0.343 0.366 0.390 0.390 0.390 0.436 0.436 0.436 0.436 0.501 0.501 0.501 0.650 0.650 0.650

6.9 6.9 7.5 7.5 8.1 8.7 8.7 8.7 9.3 9.9 9.9 9.9 11.1 11.1 11.1 11.1 12.7 12.7 12.7 16.5 16.5 16.5

0.132 0.170 0.125 0.184 0.190 0.200 0.314 0.437 0.210 0.220 0.303 0.487 0.240 0.379 0.526 0.673 0.282 0.387 0.510 0.400 0.520 0.716

MM. 3.4 4.3 3.2 4.7 4.8 5.1 8.0 11.1 5.3 5.6 7.7 12.4 6.1 9.6 13.4 17.1 7.2 9.8 13.0 10.2 13.2 18.2

En largos de 6.10 mts en acero A-36 y 12.20 mts en acero A-572°50.

 VIGA IPS PERALTE

ESPESOR DEL ALMA 

PESO

PULGADA 

MM.

KG/M

LB/FT

PULGADA 

  MM.

PULGADA 

MM.

3 4 5 6 8

76.2 101.6 127.0 152.4 203.2

8.48 11.46 14.88 18.60 27.38

5.7 7.7 10.0 12.5 18.4

2.33 2.66 3.00 3.33 4.00

59 68 76 85 102

0.17 0.19 0.21 0.23 0.27

4 5 5 6 7

En largos de 6.10 y 12.20 mts. en acero A-36.

 VIGAS IPS

09

 VIGAS IPR / VIGA W DIMENSIONES

PESO

Este producto cumple con los siguientes grados de acero A36 / A572°50 / A 992 ESPESOR DEL ALMA 

PERALTE

Pulgada

mm

Kg/m

Lb/ft Pulgada mm. Pulgada mm. Pulgada mm. Pulgada mm.

4” x 4” 5” x 5”

101.6 x 101.6 127.0 x 127.0

6” x 4”

152.4 x 101.6

6” x 6”

152.4 x 152.4

8” x 4”

203.2 x 101.6

8” x 5 1/4”

203.2 x 133.3

8” x 6 1/2”

203.2 x 165.1

8” x 8”

203.2 x 203.2

10” x 4”

254.0 x 101.6

10” x 5 3/4”

254.0 x 146.0

10” x 8”

254.0 x 203.2

10” x 10”

254.0 x 254.0

12” x 4”

304.8 x 101.6

12” x 6 1/2”

304.8 x 165.1

12” x 8”

304.8 x 203.2

12” x 10”

304.8 x 254.0

19.3 23.8 28.3 12.7 13.4 17.9 23.8 22.3 29.8 37.2 14.9 19.3 22.3 26.8 31.3 35.7 41.7 46.1 52.1 59.5 71.4 86.0 99.0 17.9 22.3 25.3 28.3 32.7 38.7 44.6 49.1 58.0 67.0 72.9 80.4 89.4 101.2 114.6 131.1 149.0 167.0 20.8 23.8 28.3 32.7 38.7 44.6 52.1 59.5 67.0 74.4 78.9 86.3

13 16 19 8.5 9 12 16 15 20 25 10 13 15 18 21 24 28 31 35 40 48 58 67 12 15 17 19 22 26 30 33 39 45 49 54 60 68 77 88 100 112 14 16 19 22 26 30 35 40 45 50 53 58

4.16 5.01 5.15 5.83 5.90 6.03 6.28 5.99 6.20 6.38 7.89 7.99 8.11 8.14 8.28 7.93 8.06 8.00 8.12 8.25 8.50 8.74 9.02 9.87 9.99 10.11 10.24 10.17 10.33 10.47 9.73 9.92 10.10 9.98 10.09 10.22 10.40 10.60 10.84 11.10 11.38 11.91 11.99 12.16 12.31 12.22 12.34 12.50 11.94 12.06 12.19 12.06 12.19

106 127 131 148 150 153 160 152 157 162 200 203 206 207 210 201 205 203 206 210 216 222 229 251 254 257 260 258 262 266 247 252 257 253 256 260 264 269 275 282 289 303 305 309 313 310 313 317 303 306 310 306 310

4.06 5.00 5.03 3.94 3.94 4.00 4.03 5.99 6.02 6.08 3.94 4.00 4.02 5.25 5.27 6.50 6.54 8.00 8.02 8.07 8.11 8.23 8.27 3.96 4.00 4.01 4.02 5.75 5.77 5.81 7.96 7.99 8.02 10.00 10.03 10.08 10.13 10.19 10.26 10.35 10.43 3.97 3.99 4.01 4.03 6.49 6.52 6.56 8.01 8.05 8.08 10.00 10.01

103 127 128 100 100 102 102 152 153 154 100 102 102 133 134 165 166 203 204 205 206 209 210 101 102 102 102 146 147 148 202 203 204 254 255 256 257 259 261 263 265 101 101 102 102 165 166 167 203 204 205 254 254

0.35 0.36 0.43 0.19 0.22 0.28 0.41 0.26 0.37 0.46 0.21 0.26 0.32 0.33 0.40 0.40 0.47 0.44 0.50 0.56 0.69 0.81 0.93 0.21 0.27 0.33 0.40 0.36 0.44 0.51 0.44 0.53 0.62 0.56 0.62 0.68 0.77 0.87 0.99 1.12 1.25 0.23 0.27 0.35 0.43 0.38 0.44 0.52 0.52 0.58 0.64 0.58 0.64

8.9 9.1 10.9 4.8 5.6 7.1 10.4 6.6 9.4 11.7 5.3 6.6 8.1 8.4 10.2 10.2 11.9 11.2 12.7 14.2 17.4 20.6 23.7 5.3 6.9 8.4 10.2 9.1 11.2 13.0 11.2 13.5 15.7 14.2 15.7 17.3 19.6 22.1 25.1 28.4 31.8 5.8 6.9 8.9 10.9 9.7 11.2 13.2 13.2 14.7 16.3 14.7 16.3

0.28 0.24 0.27 0.17 0.17 0.23 0.26 0.23 0.26 0.32 0.17 0.23 0.25 0.23 0.25 0.25 0.29 0.29 0.31 0.36 0.40 0.51 0.57 0.19 0.23 0.24 0.25 0.24 0.26 0.30 0.29 0.32 0.35 0.34 0.37 0.42 0.47 0.53 0.61 0.68 0.76 0.20 0.22 0.24 0.26 0.23 0.26 0.30 0.30 0.34 0.37 0.35 0.36

7.1 6.1 6.9 4.3 4.3 5.8 6.6 5.8 6.6 8.1 4.3 5.8 6.3 5.8 6.3 6.3 7.4 7.4 7.9 9.1 10.2 13.0 14.5 4.8 5.8 6.1 6.3 6.1 6.6 7.6 7.4 8.1 8.9 8.6 9.4 10.7 11.9 13.5 15.4 17.3 19.2 5.1 5.6 6.1 6.6 5.8 6.6 7.6 7.6 8.6 9.4 8.9 9.1

 VIGAS IPR 

    /     S     S     E     L    A     G     A     I     N     V     A     C

10

 VIGAS IPR / VIGA W DIMENSIONES Pulgada

mm

Kg/m

12” x 12”

304.8 x 304.8

14” x 5”

355.6 x 127.0

14” x 6 3/4 ”

355.6 x 171.4

14” x 8”

355.6 x 203.2

96.7 107.1 117.6 129.6 142.9 157.9 178.6 202.4 226.2 253.0 32.7 38.7 44.6 50.6 56.5 64.0 71.4 78.9

14” x 10”

355.6 x 254.0

14” x 14 1/2”

355.6 x 368.3

14” x 16”

355.6 x 406.4

16” x 5 1/2 ”

406.4 x 139.7

16” x 7”

406.4 x 177.8

16” x 10 1/4”

406.4 x 260.3

18” x 6”

457.2 x 152.4

18” x 7 1/2 ”

457.2 x 190.5

18” x 11”

457.2 x 279.4

90.8 101.2 110.1 122.0 133.9 147.3 162.2 178.6 196.4 215.8 236.6 261.9 287.2 314.0 346.7 382.4 421.1 462.8 38.7 46.1 53.6 59.5 67.0 74.4 84.8 99.7 114.6 132.6 149.0 52.1 59.5 68.4 74.4 81.8 89.3 96.7 105.6 113.1 128.0 144.3 157.7 177.1

ESPESOR DEL ALMA 

PERALTE

PESO

Lb/ft Pulgada mm. Pulgada mm. Pulgada mm. Pulgada mm. 65 72 79 87 96 106 120 136 152 170 22 26 30 34 38 43 48 53 61 68 74 82 90 99 109 120 132 145 159 176 193 211 233 257 283 311 26 31 36 40 45 50 57 67 77 89 100 35 40 46 50 55 60 65 71 76 86 97 106 119

12.12 12.25 12.38 12.53 12.71 12.89 13.12 13.41 13.71 14.03 13.74 13.91 13.84 13.98 14.10 13.66 13.79 13.92 13.89 14.04 14.17 14.31 14.02 14.16 14.32 14.48 14.66 14.78 14.98 15.22 15.48 15.72 16.04 16.38 16.74 17.12 15.69 15.88 15.86 16.01 16.13 16.26 16.43 16.33 16.52 16.75 16.97 17.70 17.90 18.06 17.99 18.11 18.24 18.35 18.47 18.21 18.39 18.59 18.73 18.97

308 311 314 318 323 327 333 341 348 356 349 353 352 355 358 347 350 354 353 357 360 363 356 360 364 368 372 375 380 387 393 399 407 416 425 434 399 403 403 407 410 413 417 415 420 425 431

12.00 12.04 12.08 12.13 12.16 12.22 12.32 12.40 12.48 12.57 5.00 5.03 6.73 6.75 6.77 8.00 8.03 8.06

450 455 459 457 460 463 466 469 463 467 472 476 482

6.00 6.02 6.06 7.50 7.53 7.56 7.59 7.64 11.04 11.09 11.15 11.20 11.27

10.00 10.04 10.07 10.13 14.52 14.57 14.61 14.67 14.73 15.50 15.57 15.65 15.71 15.80 15.89 15.99 16.11 16.23 5.50 5.53 6.99 7.00 7.04 7.07 7.12 10.24 10.30 10.37 10.43

305 306 307 308 309 310 313 315 317 319 127 128 171 171 172 203 204 205 254 255 256 257 369 370 371 373 374 394 395 398 399 401 404 406 409 412 140 140 178 178 179 180 181 260 262 263 265 152 153 154 190 191 192 193 194 280 282 283 284 286

0.61 0.67 0.74 0.81 0.90 0.99 1.10 1.25 1.40 1.56 0.34 0.42 0.39 0.46 0.52 0.53 0.60 0.66 0.65 0.72 0.79 0.86 0.71 0.78 0.86 0.94 1.03 1.09 1.19 1.31 1.44 1.56 1.72 1.89 2.07 2.26 0.35 0.44 0.43 0.51 0.57 0.63 0.72 0.67 0.76 0.88 0.99 0.43 0.53 0.61 0.57 0.63 0.70 0.75 0.81 0.68 0.77 0.87 0.94 1.06

15.5 17.0 18.8 20.6 22.9 25.1 28.1 31.8 35.6 39.6 8.6 10.7 9.9 11.7 13.2 13.5 15.2 16.8 16.5 18.3 20.1 21.8 18.0 19.8 21.8 23.9 26.2 27.7 30.2 33.3 36.6 39.6 43.7 48.0 52.6 57.4 8.9 11.2 10.9 13.0 14.5 16.0 18.3 17.0 19.3 22.2 25.0 10.9 13.5 15.5 14.5 16.0 17.8 19.0 20.6 17.3 19.6 22.1 23.9 26.9

0.39 0.43 0.47 0.52 0.55 0.61 0.71 0.79 0.87 0.96 0.23 0.26 0.27 0.29 0.31 0.31 0.34 0.37 0.38 0.42 0.45 0.51 0.44 0.49 0.53 0.59 0.65 0.68 0.75 0.83 0.89 0.98 1.07 1.17 1.29 1.41 0.25 0.28 0.30 0.31 0.35 0.38 0.43 0.40 0.46 0.53 0.59 0.30 0.32 0.36 0.36 0.39 0.42 0.45 0.50 0.43 0.48 0.54 0.59 0.66

9.9 10.9 11.9 13.1 14.0 15.5 18.0 20.1 22.1 24.4 5.8 6.6 6.9 7.4 7.9 7.9 8.6 9.4 9.7 10.7 11.4 13.0 11.2 12.4 13.5 15.0 16.5 17.3 19.0 21.1 22.6 24.9 27.2 29.7 32.8 35.8 6.3 7.1 7.6 7.9 8.9 9.7 10.9 10.2 11.7 13.3 14.9 7.6 8.1 9.1 9.1 9.9 10.7 11.4 12.7 10.9 12.2 13.7 15.0 16.8

 VIGAS IPR 

11

Este producto cumple con los siguientes grados de acero A36 / A572-50 / A 992 DIMENSIONES Pulgada

mm

18” x 11”

457.2 x 279.4

21” x 6 1/2”

533.4 x 165.1

21” x 8 1/4”

533.4 x 209.5

21” x 12 1/4”

533.4 x 311.1

24” x 7”

609.6 x 177.8

24” x 9”

609.6 x 228.6

24” x 12 3/4”

609.6 x 323.8

27” x 10”

685.8 x 254.0

27” x 14”

685.8 x 355.6

30” x 10 1/2”

762.0 x 266.7

30” x 15”

762.0 x 381.0

33” x 11 1/2”

838.2 x 292.1

36” x 12”

914.4 x 304.8

36” x 16 1/2” 40” x 12”

914.4 x 419.1 1016 x 304.8

PERALTE

PESO

 

ESPESOR DEL ALMA 

    Pulgada mm.   Pulgada mm. Pulgada mm. Kg/m   Lb/ft Pulgada mm.

193.5 212.8 235.1 65.5 74.4 84.8 71.5 92.3 101.2 108.7 123.5 138.4

130 143 158 44 50 57 48 62 68 73 83 93

19.25 19.49 19.72 20.66 20.83 21.06 20.63 20.99 21.13 21.24 21.43 21.62

489 495 501 525 529 534 524 533 537 539 544 549

11.16 11.22 11.30 6.50 6.53 6.56 8.15 8.24 8.27 8.30 8.36 8.42

284 285 287 165 166 166 207 209 210 211 212 214

1.20 1.32 1.44 0.45 0.54 0.65 0.43 0.62 0.69 0.74 0.84 0.93

30.5 33.5 36.6 11.4 13.7 16.5 10.9 15.7 17.5 18.8 21.3 23.6

0.67 0.73 0.81 0.35 0.38 0.41 0.35 0.40 0.43 0.46 0.52 0.58

17.0 18.5 20.6 8.9 9.7 10.4 9.0 10.2 10.9 11.6 13.2 14.7

150.3 165.2 181.5 196.7 218.7 81.8 92.3 101.2 113.1 125.0 139.9 153.3 154.8 174.1 194.9 217.3 241.0 261.9 285.0 306.0 125.0 139.9 151.8 169.6 192.0 217.3 239.6 133.9 147.3 160.7 172.6 184.7 196.4 220.2 257.5 284.2 314.0 175.6 193.4 209.8 226.2 200.9 223.2 238.1 253.3 312.5

101 111 122 132 147 55 62 68 76 84 94 103 104 117 131 146 162 176 192 207 84 94 102 114 129 146 161 90 99 108 116 124 132 148 173 191 211 118 130 141 152 135 150 160 170 210

21.36 21.51 21.68 21.83 22.06 23.57 23.74 23.73 23.92 24.10 24.31 24.53 24.06 24.26 24.48 24.74 25.00 25.24 25.47 25.70 26.71 26.92 27.09 27.29 27.63 27.38 27.59 29.53 29.65 29.83 30.01 30.17 30.31 30.67 30.43 30.66 30.94 32.86 33.09 33.30 33.49 35.55 35.85 36.01 36.17 36.69

543 546 551 554 560 599 603 603 608 612 617 623 611 616 622 628 635 641 647 653 678 684 688 693 702 695 701 750 753 758 762 766 769 779 773 779 786 835 840 846 850 903 911 915 918 932

12.29 12.34 12.39 12.44 12.51 7.01 7.04 8.97 8.99 9.02 9.07 9.00 12.75 12.80 12.86 12.90 12.95 12.89 12.95 13.00 9.96 9.99 10.02 10.07 10.01 13.97 14.02 10.40 10.45 10.48 10.50 10.52 10.54 10.48 15.00 15.04 15.12 11.48 11.51 11.54 11.56 11.95 11.98 12.00 12.03 12.18

312 313 315 316 318 178 179 228 228 229 230 229 324 325 327 328 328 327 329 330 253 254 255 256 254 355 356 264 265 266 267 267 267 266 381 382 384 292 292 293 293 304 304 305 306 309

0.80 0.88 0.96 1.04 1.15 0.51 0.59 0.59 0.68 0.77 0.88 0.98 0.75 0.85 0.96 1.09 1.22 1.34 1.46 1.57 0.64 0.75 0.83 0.93 1.10 0.98 1.08 0.61 0.67 0.76 0.85 0.93 1.00 1.18 1.07 1.19 1.31 0.74 0.86 0.96 1.05 0.79 0.94 1.02 1.10 1.36

20.3 22.4 24.4 26.3 29.2 13.0 15.0 15.0 17.3 19.6 22.4 24.9 19.0 21.6 24.4 27.7 31.0 34.0 37.1 39.9 16.3 19.0 21.1 23.6 27.9 24.9 27.4 15.5 17.0 19.3 21.6 23.6 25.4 30.0 27.1 30.1 33.4 18.8 21.8 24.4 26.7 20.1 23.9 25.9 27.9 34.5

0.50 0.55 0.60 0.65 0.72 0.40 0.43 0.42 0.44 0.47 0.52 0.55 0.50 0.55 0.61 0.65 0.70 0.75 0.81 0.87 0.46 0.49 0.52 0.57 0.61 0.61 0.66 0.47 0.52 0.55 0.57 0.59 0.61 0.65 0.66 0.71 0.78 0.55 0.58 0.61 0.63 0.60 0.63 0.65 0.68 0.83

12.7 14.0 15.2 16.5 18.3 10.2 10.9 10.7 11.2 11.9 13.2 14.0 12.7 14.0 15.5 16.5 17.8 19.1 20.6 22.1 11.7 12.4 13.2 14.5 15.5 15.5 16.8 11.9 13.2 14.0 14.5 14.9 15.5 16.5 16.7 18.0 19.7 14.0 14.7 15.5 16.0 15.2 16.0 16.5 17.2 21.1

  343.8 221.7

231 149

36.50 38.20

927 970

16.46 11.81

418 300

1.26 0.83

32.0 21.1

0.76 0.63

19.3 16.0

 VIGAS IPR 

    /     R     W     P     I    S     S    A     G     A     I     G     V     I     V

12

 ÁNGULOS(LADOS IGUALES) y 6.10 mts. (20 pies) ESPESOR

ANCHO

ESPESOR ANCHO

PULGADA .109 x1 x1 1/4 x1 1/2 1/8 x 3/4 x1 x 1 1/4 x 1 1/2 x2 3/16 x 1 x 1 1/4 x 1 1/2 x 1 3/4 x2 x 2 1/2 x3 1/4 x 1 x 1 1/4 x 1 1/2 x2 x 2 1/2 x3 x4 5/16 x 3 x4 3/8 x 2 x 2 1/2 x3 x4 x5 x6 1/2 x 3 x4 x6

MM. 2.8 x 25.4 x 31.7 x 38.1 3.2 x 19.0 x 25.4 x 31.7 x 38.1 x 50.8 4.8 x 25.4 x 31.7 x 38.1 x 44.4 x 50.8 x 63.5 x 76.2 6.3 x 25.4 x 31.7 x 38.1 x 50.8 x 63.5 x 76.2 x 101.6 7.9 x 76.2 x 101.6 9.5 x 50.8 x 63.5 x 76.2 x 101.6 x 127.0 x 152.4 12.7 x 76.2 x 101.6 x 152.4

Se manejan en Acero A-36 ó A-529°50

Pregunte por nuestro inventario en grado dual.

PESO

ESPESOR

ANCHO

KG/M

PULGADA

1.05 1.33 1.61 0.88 1.19 1.50 1.83 2.46 1.73 2.20 2.68 3.15 3.63 4.57 5.52 2.22 2.86 3.48 4.75 6.10 7.29 9.82 9.08 12.20 6.99 8.78 10.71 14.58 18.30 22.17 13.99 19.05 29.16

.109 xx 1 xx 1 1/4 xx 1 1/2 1/8 xx 1 1/2 xx 1 3/4 xx 2 3/16 xx 1 3/4 xx 2 xx 2 1/2 xx 3 1/4 xx 1 3/4 xx 2 xx 2 1/2 xx 3 xx 3 1/2 xx 4 5/16 xx 3 xx 3 1/2 xx 4 xx 5 xx 6 3/8 xx 3 xx 3 1/2 xx 4 xx 5 xx 6 7/16 xx 4 xx 6 1/2 xx 3 xx 4 xx 5 xx 6 xx 8 9/16 x 8 5/8 xx 4 xx 6 xx 8 3/4 xx 6 xx 8 7/8 xx 8 1 xx 6 xx 8 1 1/8 xx 8

Solicite otras medidas

ESPESOR ANCHO

2.8     3.2     4.8       6.3           7.9       9.5         11.1   12.7       14.3 15.9     19.0   22.2 25.4   28.6

PESO

MM.

KG/M

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

1.05 1.33 1.61 1.83 2.14 2.46 3.15 3.63 4.57 5.52 4.12 4.75 6.10 7.29 8.63 9.82 9.08 10.71 12.20 15.32 18.45 10.71 12.64 14.58 18.30 22.17 16.81 25.59 13.99 19.05 24.11 29.16 39.28 44.05 23.36 36.01 48.66 42.71 57.88 66.96 55.65 75.89 84.67

25.4 31.7 38.1 38.1 44.4 50.8 44.4 50.8 63.5 76.2 44.4 50.8 63.5 76.2 88.9 101.6 76.2 88.9 101.6 127.0 152.4 76.2 88.9 101.6 127.0 152.4 101.6 152.4 76.2 101.6 127.0 152.4 203.2 203.2 101.6 152.4 203.2 152.4 203.2 203.2 152.4 203.2 203.2

Se manejan en Acero A-572°50 ó A-529°50

 ÁNGULOS(LADOS DESIGUALES) y 6.10 mts. (20 pies) ESPESOR ANCHO

ESPESOR

PULGADA 

3/16 x 3 x 2 1/4 x 3 x 2

4.8 x 6.3 x

ANCHO

PESO

  MM.

KG/M

76.2 x 50.8 76.2 x 50.8

4.57 6.10

ESPESOR  ANCHO

ESPESOR

PULGADA 

1/4 5/16 3/8 3/8 1/2

x4x3 x6x4 x4x3 x6x4 x6x4

6.3 7.9 9.5 9.5 12.7

x x x x x

 ANCHO

PESO

MM.   101.6 x 76.2 152.4 x 101.6 101.6 x 76.2 152.4 x 101.6 152.4 x 101.6

KG/M

8.63 15.33 12.65 18.30 24.11

Se manejan en Acero A-36 ó A-529°50

PERFILES COMERCIALES

SOLERAS

SOLERAS Soleras a 6.10 mts. (20 pies)

Soleras a 6.10 mts. (20 pies)

Pulgada 1/8

x 1/2* x 3/4* x 1* x 1 1/4* x 1 1/2* x 2* x 2 1/2** x 3** x 4** 3/16 x 1/2* x 3/4* x 1* x 1 1/4* x 1 1/2* x 2* x 2 1/2** x 3** x 4** x 6** x 8** 1/4 x 1* x 1 1/4 x 1 1/2 x 2* x 2 1/2 x 3 x 4 x 5 x 6 x 8 x 10 x 12 3/8 x 1 x 1 1/4 x 1 1/2 x 2 x 2 1/2 x 3 x 4 x 5 x 6 x 8 x 10 x 12

mm. 3.2 x 12.7 x 19.0 x 25.4 x 31.7 x 38.1 x 50.8 x 63.5 x 76.2 x 101.6 4.8 x 12.7 x 19.0 x 25.4 x 31.7 x 38.1 x 50.8 x 63.5 x 76.2 x 101.6 x 152.4 x 203.2 6.3 x 25.4 x 31.7 x 38.1 x 50.8 x 63.5 x 76.2 x 101.6 x 127.0 x 152.4 x 203.2 x 254.0 x 304.8 9.5 x 25.4 x 31.7 x 38.1 x 50.8 x 63.5 x 76.2 x 101.6 x 127.0 x 152.4 x 203.2 x 254.0 x 304.8

13

Kg/m 0.32 0.47 0.63 0.79 0.95 1.27 1.58 1.90 2.54 0.47 0.71 0.95 1.19 1.42 1.90 2.38 2.84 3.80 5.68 7.60 1.27 1.58 1.90 2.53 3.17 3.79 5.06 6.32 7.59 10.13 12.66 15.18 1.90 2.38 2.84 3.79 4.75 5.70 7.59 9.49 11.40 15.18 18.99 22.80

Se manejan en Acero A-36 *Soleras disponibles de Slitter y de Molino **Soleras de Slitter

Contamos con servicio de corte a medida en Sierra Cinta

Pulgada 1/2

5/8

3/4

1

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

1 1 1/2 2 2 1/2 3 4 5 6 8 10 12 3 4 5 6 8 10 12 1 1/2 2 2 1/2 3 4 5 6 8 10 12 2 3 4 6 8 10 12

mm.

Kg/m

12.7 x 25.4 x 38.1 x 50.8 x 63.5 x 76.2 x 101.6 x 127.0 x 152.4 x 203.2 x 254.0 x 304.8 15.9 x 76.2 x 101.6 x 127.0 x 152.4 x 203.2 x 254.0 x 304.8 19.0 x 38.1 x 50.8 x 63.5 x 76.2 x 101.6 x 127.0 x 152.4 x 203.2 x 254.0 x 304.8 25.4 x 50.8 x 76.2 x 101.6 x 152.4 x 203.2 x 254.0 x 304.8

2.53 3.79 5.06 6.32 7.59 10.13 12.66 15.18 20.24 25.33 30.36 9.49 12.66 15.83 18.99 25.33 31.66 37.97 5.70 7.59 9.49 11.40 15.18 18.99 22.80 30.36 37.97 45.59 10.13 15.18 20.27 30.36 40.53 50.65 60.71

Se manejan en Acero A-36

SOLERAS Soleras a 12.20 mts. (40 pies) en Acero A-529°55

Pulgada

mm.

Kg/m

5/16 x 6 x 8 x 10 3/8 x 6 x 8 x 10 x 12 1/2 x 6 x 8 x 10 x 12 5/8 x 6 x 8 x 10 x 12 3/4 x 8 x 10 x 12 1 x 8 x 10 x 12

7.9 x 152.4 x 203.2 x 254.0 9.5 x 152.4 x 203.2 x 254.0 x 304.8 12.7 x 152.4 x 203.2 x 254.0 x 304.8 15.9 x 152.4 x 203.2 x 254.0 x 304.8 19.0 x 203.2   x 254.0 x 304.8 25.4 x 203.2   x 254.0 x 304.8

9.49 12.65 15.77 11.40 15.18 18.99 22.80 15.18 20.24 25.33 30.36 18.99 25.33 31.66 37.97 30.35 37.97 45.59 40.47 50.65 60.71

*También se maneja en grado A-572°65

PERFILES COMERCIALES

    /    S     S    A     O     L    R     E     U     L     G     O     N     S     A

14

REDONDOS Y CUADRADOS Pulgada 3/8* 12 mm* 1/2* 5/8* 3/4 7/8 1 1 1/8 1 1/4 1 1/2 1 3/4 2 2 1/2

mm. 9.5 12.0 12.7 15.9 19.0 22.2 25.4 28.6 31.7 38.1 44.4 50.8 63.5

Redondos (Kg/m)

Cuadrados (Kg/m) 0.71 1.20 1.27 1.98 2.85 ----5.06 --------11.39 ----20.25 -----

0.56 -----0.99 1.55 2.24 3.04 3.98 5.03 6.21 8.95 12.18 15.91 24.85

* También se manejan retorcidos.

REDONDOBRILLANTE (semiflecha) Se manejan en acero A-36

Pulgada

mm.

Kg/m

3/16 1/4 5/16 3/8

4.8 6.3 7.9 9.53

0.14 0.25 0.39 0.56

PERFILES COMERCIALES

15

REJILLA ELECTROFORJADA  PESO

Pregunte por otras medidas en rejillas

CLARO MAXIMO CLARO MAXIMO CON CARGA HUMANA  CON EQUIPO PESADO

Pulgada

mm.

Kg/m2

m.

m.

1/8 x 1 1/8 x 1 1/4 3/16 x 1 3/16 x 1 1/4

3.2 x 25.4 3.2 x 31.7 4.8 x 25.4 4.8 x 31.7

25.50 31.16 36.83 45.17

1.29 1.63 1.50 1.70

--------0.20 0.25

Se maneja en 1 X 6 mts.

POLÍN

Los podemos fabricar a largo especial en acero comercial y en alta resistencia. Punzonamos patrón "G".

Perfil

Dimensiones

Kg/m

Largo (m)

3 Cal 16 3 Cal 14 4 Cal 16 4 Cal 14 5 Cal 14 6 Cal 14* 6 Cal 12 8 Cal 14* 8 Cal 14 8 Cal 12 8 Cal 10 10 Cal 14*** 10 Cal 14** 10 Cal 12 10 Cal 10 12 Cal 14 12 Cal 12 12 Cal 10

3” x 1 1/2” 3” x 1 1/2” 4” x 2” 4” x 2” 5” x 2” 6” x 2” 6” x 2” 8” x 2 3/4” 8” x 2 3/4” 8” x 2 3/4” 8” x 2 3/4” 10” x 2 3/4” 10” x 3 1/2” 10” x 2 3/4” 10” x 2 3/4” 12” x 3 1/2” 12” x 3 1/2” 12” x 3 1/2”

2.10 2.40 2.69 3.18 3.55 4.16 5.66 5.37 5.37 7.62 9.62 6.20 7.03 8.70 11.10 7.66 10.83 13.83

6 6 6 6 6 6 6 8 6 8 8 10 10 10 10 12 12 12

* Se maneja en acero comercial, alta resistencia y galvanizado de inventario. ** Solo se maneja en acero de alta resistencia de inventario. *** Solo se maneja en acero comercial y galvanizado de inventario.

Fabricamos polines “C” y “Z” de 6” a 12” en largos especiales.

CONSTRUCCIÓN

    /     A     N     I     L     L     L     I     O     J     E    P     R

16

PTR  DIMENSIONES EXTERIORES Pulgada mm. 19 x 19  3/4”x 3/4” 1”x 1” 25 x 25

1 1/4” x 1 1/4”

32 x 32

1 1/2” x 1 1/2”

38 x 38

2” x 1”

51 x 25

2” x 2”

51 x 51

2 1/2” x 2 1/2”

64 x 64

3” x 1 1/2”

76 x 38

3” x 2”

76 x 51

3” x 3”

76 x 76

3 1/2” x 3 1/2”

89 x 89

4” x 1 1/2” 4” x 2”

102 x 38 102 x 51

**También se manejan galvanizados.

ESPESOR Pulgada 0.048 0.048 0.060 0.075** 0.090 0.105 0.120 0.135 0.048 0.060 0.075** 0.105 0.048 0.060 0.075** 0.105 0.120 0.150 0.048 0.075 0.120 0.048 0.060 0.075** 0.105 0.120 0.135 0.150 0.180 0.250 0.075 0.105 0.120 0.135 0.180 0.250 0.048 0.075 0.075 0.120 0.135 0.180 0.250

mm. 1.2 1.2 1.5 1.9 2.3 2.7 3.0 3.4 1.2 1.5 1.9 2.7 1.2 1.5 1.9 2.7 3.0 3.8 1.2 1.9 3.0 1.2 1.5 1.9 2.7 3.0 3.4 3.8 4.6 6.3 1.9 2.7 3.0 3.4 4.6 6.3 1.2 1.9 1.9 3.0 3.4 4.6 6.3

0.075 0.120 0.150 0.180 0.250 0.120 0.150 0.180 0.250 0.075 0.075 0.120 0.150 0.180 0.250

1.9 3.0 3.8 4.6 6.3 3.0 3.8 4.6 6.3 1.9 1.9 3.0 3.8 4.6 6.3

CALIBRE DE IDENTIFICACIÓN

PESO

C18 C18 C16 C14 C13 C12 C11 C10 C18 C16 C14 C12 C18 C16 C14 C12 C11 C09 C18 C14 C11 C18 C16 C14 C12 C11 C10 C09 C07 1/4´´  C14 C12 C11 C10 C07 1/4´´  C18 C14 C14 C11 C10 C07 1/4´´ 

Kg/m 0.70 0.90 1.18 1.33 1.56 1.76 1.95 2.13 1.14 1.40 1.71 2.30 1.38 1.80 2.09 2.82 3.17 3.81 1.44 2.09 3.17 1.87 2.31 2.85 3.89 4.38 4.86 5.33 7.41 9.09 3.62 5.27 5.60 6.23 8.36 11.62 2.18 3.23 3.62 5.60 6.23 8.36 11.62

C14 C11 C09 C07 1/4´´  C11 C09 C07 1/4´´  C14 C14 C11 C09 C07 1/4´´ 

4.38 6.81 8.37 10.26 13.11 8.03 9.89 12.17 15.64 3.99 4.61 6.81 8.37 10.26 13.13

LARGOS

6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.10 6.10 6.00 6.10 6.10 6.10 6.10 6.10 6.10 6.10 6.1/12.2 6.10 6.10 6.1/12.2 6.10 6.10 6.10 6.1/12.2 6.10 6.10 6.10 6.10 6.10 6.1/12.2

¡Pregunta por los PTR  C18 rolado caliente con mayor descuento!

Los PTR con espesores iguales y menores a 0.105” se manejan en acero A-513, arriba de 0.105” se manejan en A-500°B.

Corte a medida en Sierra Cinta

PTR 

17

¡Ya ¡Ya fabricamos fabricamos Tubo Tubo yy PTR! PTR!

DIMENSIONES EXTERIORES Pulgada mm. 4” x 3” 102 x 76

4” x 4”

102 x 102

5” x 3”

127 x 76

5” x 5”

127 x 127

6” x 2”

152 x 51

6” x 4”

152 x 102

ESPESOR Pulgada

mm.

0.075 0.120 0.150 0.180 0.250 0.075 0.125 0.150 0.187 0.250 0.075 0.125 0.187 0.250 0.125 0.187 0.250 0.075 0.125 0.187 0.250

1.9 3.0 3.8 4.6 6.3 1.9 3.2 3.8 4.6 6.3 1.9 3.2 4.7 6.3 3.2 4.7 6.3 1.9 3.2 4.7 6.3

0.125 0.187 0.250

3.0 4.6 6.3

CALIBRE DE IDENTIFICACIÓN

PESO

LARGOS

C14 C11 C09 C07 1/4" C14 1/8" C09 3/16" 1/4" C14 1/8" 3/16" 1/4"

Kg/m 5.40 8.03 9.89 12.14 15.64 6.19 9.85 11.31 14.82 18.18 6.19 9.85 14.82 18.18

6 .10 6 .10 6 .10 6 .10 6 .1/12.2 6 .10 6 .1/12.2 6 .10 6 .1/12.2 6 .1/12.2 6 .10 6 .1/12.2 6 .1/12.2 6 .1/12.2

1/8" 3/16" 1/4" C14 1/8" 3/16" 1/4"

12.42 18.96 23.24 6.19 9.85 14.82 18.18

6 .1/12.2 6 .1/12.2 6 .1/12.2 6 .10 6 .1/12.2 6 .1/12.2 6 .1/12.2

1/8" 3/16" 1/4"

12.41 18.96 23.24

6 .1/12.2 6 .1/12.2 6 .1/12.2

CALIBRE DE IDENTIFICACIÓN

PESO

C20 C18 C20 C18 C20 C18 C20 C18 C20 C18 C20 C18 C20 C18

0.51 0.69 0.70 0.94 0.88 1.18 1.08 1.45 1.07 1.44 1.41 1.91 1.60 2.10

PTR VERDE GALVANIZADO DIMENSIONES EXTERIORES Pulgada mm. 3/4" x 3/4"

19 x 19

1" x 1"

25 x 25

1 1/4" x 1 1/4"

32 x 32

1 1/2" x 1 1/2"

38 x 38

2" x 1"

51 x 25

2" x 2"

51 x 51

3" x 1 1/2"

76 x 38

Los PTR con espesores iguales y menores a 0.105” se manejan en acero A-513, arriba de 0.105” se manejan en A-500°B.

ESPESOR Pulgada

mm.

0.036 0.048 0.036 0.048 0.036 0.048 0.036 0.048 0.036 0.048 0.036 0.048 0.036 0.048

0.9 1.2 0.9 1.2 0.9 1.2 0.9 1.2 0.9 1.2 0.9 1.2 0.9 1.2

LARGOS

Kg/m 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0     S     R     T     S     P     H

18

HSS

 A-500°B LIM. ELÁSTICO46,000 PSI (lb/in2)

DIMENSIONES EXTERIORES mm. Pulgada

Solicite otras medidas

ESPESOR

PESO

Pulgada

mm.

Kg/pza.

Kg/m

0.312 0.375 0.312 0.375

7.9 9.5 7.9 9.5

270 314 348 408

22.13 25.73 28.52 33.44

348 406 264 346 424 500 640

28.52 33.27

264 346 424 500 640 408 592 356 470 578 684 888 358 470 685 888

21.63 28.36 34.75 40.98 52.45 33.44 48.52

4” x 4”

102 x 102

5” x 5”

127 x 127

6” x 4”

152 x 102

0.312 0.375

7.9 9.5

6” x 6”

152 x 152

0.187 0.250 0.312 0.375 0.500

8” x 4”

203 x 102

0.187 0.250 0.312 0.375 0.500

8” x 6”

203 x 152

8” x 8”

203 x 203

10” x 6”

254 x 152

0.250 0.375 0.187 0.250 0.312 0.375 0.500 0.187 0.250 0.375 0.500

4.7 6.3 7.9 9.5 12.7 4.7 6.3 7.9 9.5 12.7 6.3 9.5 4.7 6.3 7.9 9.5 12.7 4.7 6.4 9.5 12.7

10” x 10”

254 x 254

0.187 0.250 0.312 0.375 0.500

4.7 6.3 7.9 9.5 12.7

450 592 734 870 1,134

36.88 48.52 60.16 71.31 92.96

12” x 6”

305 x 152

0.375

9.5

778

63.77

12” x 8”

305 x 203

12” x 12”

305 x 305

14” x 14”

356 x 356

0.250 0.375 0.500 0.250 0.312 0.375 0.500 0.625 0.312 0.375 0.500 0.625

6.3 9.5 12.7 6.3 7.9 9.5 12.7 15.9 7.9 9.5 12.7 15.9

592 870 1,134 716 888 1,056 1,382 1,694 1,042 1,240 1,628 1,998

48.52 71.31 92.96 58.68 72.79 86.55 113.27 138.85 85.40 101.64 133.44 163.77

16” x 16”

406 x 406

0.312 0.375 0.500 0.625

7.9 9.5 12.7 15.9

1,196 1,426 1,876 2,312

98.03 116.89 153.77 189.51

En largos de 12.20 mts.

     

21.63 28.36 34.75 40.98 52.45

29.18 38.52 47.37 56.06 72.78 29.34 38.52 56.14 72.78

HSS

19

TUBERIA REDONDA ( Cédula 30, 40 Y Estructural ) CÉDULA / ESPESOR

PESO

LARGOS

Pulgada

mm.

Pulgada

mm.

Pulgada

mm.

Cédula

Calibre

mm.

Kg/m

Metros

 3/4

19.05

1.050

26.67

0.900

22.86

30

C14

1.91

1.13

6.00

1

25.40

1.315 1.315

33.40 33.40

1.165  1.049

29.59 26.64

30 40

C14 C10

1.91 3.43

1.50 2.50

6.00 6.00

1 1/4

31.75

1.660 1.660

42.16 42.16

1.480 1.380

37.59  35.05

30 40

C13 C10

2.29 3.43

2.35 3.39

6.00  6.00

1 1/2

38.10

1.900 1.900

48.26 48.26

1.720 1.610

43.69  40.89

30 40

C13 C09

2.29 3.81

2.70 4.05

6.00  6.00

2

50.80

2.375 2.375

60.33 60.33

2.165 2.067

54.99  52.50

30 40

C12 C09

2.67 3.81

3.95 5.44

6.00  6.00

2 1/2

63.50

2.875 2.875

73.02 73.02

2.665 2.500

67.69 63.50

30 40

C12 0.187"

2.67 4.76

4.63 8.63

6.10  6.10

3

76.20

3.500 3.500

88.90 88.90

3.260 3.068

82.80 77.93

30 40

C11 C04

3.04 5.71

6.45 11.29

6.10  6.10

4

101.60

4.500 4.500

114.30 114.30

4.260 4.026

108.20  102.26

30 40

C11 C04

3.04 5.71

8.35 16.07

6.10  6.10

6

152.40

6.625 6.625 6.625

168.28 168.28 168.28

6.250  6.125 6.065

158.75 155.58  154.05

30 Estructural 40

0.187" 0.250" 0.280"

4.75 6.35 7.11

19.23 25.41 28.24

6.10 6.1/12.2  6.10

8

203.20

8.625 8.625

219.08 219.08

8.125 7.981

206.38 202.72

Estructural Estructural

0.250" 0.322"

6.35 8.18

35.57 42.55

6.1/12.2 6.1/12.2

10

254.00

10.750 10.750

273.05 273.05

10.250 10.000

260.35 254.00

Estructural Estructural

0.250" 0.365"

6.35 9.53

41.88 60.33

12.20 12.20

12

304.80

12.750 12.750

323.85 323.85

12.250 12.000

311.15 304.80

Estructural Estructural

0.250" 0.375"

6.35 9.53

49.84 73.91

12.20 12.20

14

355.60

14.000

355.60

13.250

336.50

Estructural

0.375"

9.53

81.41

12.20

16

406.00

16.000

406.40

15.000

381.00

Estructural

0.500"

12.70

123.44

12.20

Contamos con servicio de corte a medida en Sierra Cinta

20

NUESTRA INFRAESTRUCTURA                   

                                      

Para conocer nuestras direcciones consulte la contraportada de nuestro Catálogo

NUESTRAS 14 UBICACIONES

NIVELADORAS

Nivelación hasta 3/4 ” x 96” en rollos de 40 toneladas máximo.

LÁSER

El corte más preciso para cualquier tipo de �gura.

Corta hasta 3/4” de espesor en medidas de hasta 10´ X 20´

PLASMA

Corta cualquier �gura diseñada en Autocad con excelente precisión.

Corta hasta 2” de espesor en medidas de hasta 10´ X 80´

PANTOGRAFO Corta hasta 6” de espesor y en medidas de hasta 8´x 40´

CIZALLAS

Corta Tiras y Cuadros.

Corta hasta 5/8” x 20´

SLITTER

Corta cintas a partir de rollo.

Corta hasta .280” x 75” en rollos de hasta 36 toneladas

PLANTA TUBERÍA

Fabricamos Tubo y PTR desde 3/4" hasta 6" x 4" en espesores desde cal. 22 hasta 0.280".

POLINERA

Fabricamos Polín "C" y "Z" de 6" a 12" en calibre 10, 12 y 14, de hasta 14 m de largo.

SOLERADORA

Fabricación de solera hasta de 1/4" de espesor.

SIERRA CINTA

Corta materiales estructurales a largos especiales.

Corta paquetes de hasta 28” x 20”

HERMOSILLO

Carretera a Sahuaripa 356 Hermosillo, Sonora. C.P. 83299 Tel. (662) 800 8800 E-mail: [email protected]

SALTILLO

MONTERREY 

Blvd. Vito Alessio Robles 4821 Col. Asturias, Saltillo, Coah. C.P. 25107 Tel. (844) 439-2210 / 11 / 26 / 64 E-mail: [email protected]

LAGUNA

Blvd. Carlos Salinas de Gortari Km. 8.8  Apodaca, N.L. C.P. 66600 Tel. (81) 8156-5200 E-mail: [email protected]

 Valle del Guadiana 297 Parque Industrial Gómez Palacio Gómez Palacio, Dgo. C.P. 35078 Tel. (871) 750-2400 E-mail: [email protected]

MÉXICO

SANLUISPOTOSI

 Av. Ceylán 1042 Nte. Col. Industrial Vallejo Mexico, D.F., C.P. 02300 Tel. (55) 5078-1212 E-mail: [email protected]

 Av. Ampliación 310 Zona Industrial San Luis Potosi, SLP. C.P. 78395 Tel. (444) 870-0400 E-mail: [email protected]

MÉXICO2(Los Reyes )

LEÓN

Carretera México - Texcoco Km 22.5 Col. La Magdalena Atlicpac La Paz, Estado de México. CP. 56525 Tel. (55) 8851-9800 / 29 E-mail: [email protected]

GUADALAJARA

Blvd. José María Morelos 4802 Col. Industrial Julián de Obregón León, Guanajuato C.P. 37290 Tel. (477) 711-2020, 784-0639/51 E-mail: [email protected]

QUERÉTARO

Periférico Nuevo Km 4.5 Parque Industrial El Salto Delegación San José del Castillo, El Salto, Jalisco C.P. 45685 Tel. (33) 3612-0860, (33) 3612-0870 E-mail: [email protected]

Libramiento Sur-Poniente Km. 15 / 840 Col. Ejido Los Ángeles Corregidora, Qro. C.P. 76908 Tel. (442) 217-2000 E-mail: [email protected]

TIJUANA

PUEBLA

Calle de Acceso 8080, Col. El Tecolote, Tijuana, B.C., C.P. 22644 Tel. (664) 660-0100/01, E-mail: [email protected]

MEXICALI Blvd. Lázaro Cárdenas 2023 Mexicali, B.C. C.P. 21390 Tel. (686) 563-1888 E-mail: [email protected]

 Antiguo Camino a la Resurrección 10619, Local B Fracc. Industrial Resurrección, Puebla, Puebla, C.P. 72228. Tel. (222) 141-5810 E-mail: [email protected]

VERACRUZ

 Av. Las Torres 1572 Cd. Industrial Bruno Pagliai,  Veracruz, Ver. C.P. 91697 Tel. (229) 155-0100 E-mail: [email protected]

Emisión: 06/18

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF