Force Ware

August 17, 2018 | Author: guliver | Category: N/A
Share Embed Donate


Short Description

Download Force Ware...

Description

MAC MAC MAC MAC MAC

COM COM COM COM COM

voip_9989 voip_9910 voip_9979 voip_9990 voip_9993

10 MEGA 10 MEGA 12 MEGA 20 MEGA 100 MEGA

Para identificar a velocidade do MAC, se o script gerar por exemplo: XXbd43eaXX voip_9989_1pc 3 days, 15:09:08.00 Thomson CableHome PacketCable Gatew ay E-MTA HW_REV: 2.1; VENDOR: Thomson; BOOTR: 2.1.7i; SW_REV: ST9C.05.08; MODEL: DWG850-4 Nesse exemplo o MAC é de 10MB, pq o nome da confg. é voip_9989_1pc. Quero saber como ficou para as novas velocidades de 30MB, 60MB e 120MB. v1.2 by mforce Note; The Attached release is not a full flash image, it is meant to be flashed on UBFI1 or UBFI2 Modem Support: SB6120, SBV6220, ZOOM5431, DPC3000, U10C035, TM702G, TM802G, SMCD 3GN, SB6121, CMD31T + MORE PUMA5 Modems Not CURRENTLY Supported: Any with the MXL261 Chipset Options; - Forcing configs - BPI Disable/Bypass - Web interface firmware upgrading - Certificate upload via WEB Interface - Support WinSCP and SSH connections. - SNMP request logging and reply spoofing - Custom written LED Control daemon - Docsis filters disable - Support for multiple modems - Usage Graphs - "Serial" Logs viewable on the web interface. - Added programs for command line interface. - Configuration - Refer to tutorial section for setup Info you will need; - SSH : Login: root Password: sbhacker [Use the "passwd" cmd to change the passw ord] - WWW : http://192.168.100.1 - WWW : Login: sbhacker Password: sbh [Use Web Interface to change the password] - Tuner Info SMCD3GN - TUNER: MT2170 PGA : MT1570 SB6121 - TUNER: MT2170 PGA : MT1570 DPC3000 - TUNER: MT2170 PGA : ANAD_ARA2017 SB6120 - TUNER: MT2170 PGA : ANAD_ARA2017 SBV6220 - TUNER: MT2170 PGA : ANAD_ARA2017

ZOOM5341 - TUNER: MT2170 PGA : ANAD_ARA2017 TM802G - TUNER: MT2170 PGA : MT1570 [Plus 4x MXL242 to make up a total of 8 DS c hannels -- Currently unsupported!] CMD31T - TUNER: MT2170 PGA : ANAD_ARA2017 -

Upgrade via WEBIF Info Set Auto-Start to 0 Reboot Upload new image to modem via WEBIF Wait for it to finish flashing (Could take a min or two) Set Auto-Start to 1 Reboot

- Memory reducing steps - Set "Freq. Display" Option to Disable - Set "US/DS Channels" to what you are actually capable of bonding. ex DS=4 US=1

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF