Fire Detector Devices.pdf

FIRE

FIRE

Smoke & Fire Detectors Sounders & Strobes Fire Alarm Control Panels Emergency Warning Systems Analog Fire Systems Wireless Fire Alarm Systems Fire Accessories

45

FIRE DETECTION DEVICES

Conventional Smoke & Fire Detectors ADEMCO LOW PROFILE PLUG IN SMOKE DETECTORS • • • • • • • •

Models Available: Part Number 1600 2600 2151AUS

Low profile design Same design for both photo & ion versions Uses universal B401 base Magnetic test feature Blinking LED 1151EIS MOD400R port B401R Field cleanable, easily removable cover & screen B401 12/24VDC operation

ADEMCO PLUG-IN THERMAL DETECTORS • Provides rate of rise & fixed point operation • Available in types A, B, C & D • Uses universal B401 plug in base • Dual LED’s for 360 visibility • Interchangeable with 600 series smokes • 12/24VDC operation

Models Available: Part Number 5151A 5151B 5151C 5151D B401R B401

SYSTEM SENSOR I3 SERIES PHOTO SMOKE DETECTORS • • • • • •

Low profile plug in design Normally open contacts Dual LED alarm & service indicators Thermal option Drift compensation Remote maintenance signal

SYSTEM SENSOR LOW PROFILE SMOKE DETECTORS WITH SOUNDER

FIRE

• Plug in design • On board sounder with temporal pattern tone • Aux relay with C/O contacts • “Smartcheck” diagnostics • Thermal detection • 12/24VDC operation

SECURITY PHOTO – OPTICAL SMOKE DETECTOR • Photo optical detector • Unique chamber design controls the build up of dust • Low profile, plug in design • Laser test feature • 12/24DC operation • Suits four wire relay base

46

SALES

1300 368 755

Description Low profile ion detector Low profile photo electronic detector System Sensor photo electronic detector Intrinsically safe ion detector Universal mounting base 2 wire with resistor Universal mounting base 2 wire

Description Type A thermal detector Type B thermal detector Type C thermal detector Type D thermal detector Universal mounting base 2 wire with resistor Universal mounting base 2 wire

Models Available: Part Number Description 2WB 2 wire photo electronic smoke 2WTB 2 wire photo electronic smoke with thermal 4WB 4 wire photo electronic smoke, N/O contacts 4WTB 4 wire photo electronic smoke with thermal

Models Available: Part Number Description 4WTARB Photo electronic with thermal, 4 wire, aux relay with C/O contacts & on board sounder 4WITARB As above with non latching smoke & isolated thermal

Models Available: Part Number Description 2151 Low profile photo detector

TECH SUPPORT

1800 220 345

FIRE DETECTION DEVICES

Conventional Smoke & Fire Detectors 4 WIRE PLUG-IN RELAY BASES

Models Available: Part Number B412NL B412RL B424L

• • • •

Suits 2 & 4 wire systems 12VDC & 24VDC models Accepts photo, ion & heat detectors Non latching or latching versions with change over contacts • Interchangeable with 600 Series smokes • Tamper resistant base

SYSTEM SENSOR PHOTO ELECTRONIC SMOKE ALARM

Models Available: Part Number Description 2012H Photo electronic smoke alarm 4 wire REG202012 12/24 VDC Regulator 1 amp

• Compact attractive design • Photo electronic chamber provides exceptional stability • 85dB on board horn • Aux relay • Interconnectable up to 12 units • 8 Second AVF on relay outputs • Tamper resistant base • Approved to AS3786

CHEMETRONICS RATE OF RISE HEAT DETECTOR • • • • • • •

Models Available: Part Number Description 601 Rate of rise & 57°C fixed element, 1 set of N/O contacts 602 Rate of rise & 94°C fixed element, 1 set of N/O contacts 622 Rate of rise & 57°C fixed element, 2 sets of N/O contacts 603 57°C fixed temp operation, 1 set of N/O contacts 5809 Wireless version of 601

Low profile design N/O contacts Rate of rise and fixed temp operation Low profile mounting Resettable on rate of rise Wireless version available Dual contact version available

2WMOD – I3 SERIES LOOP ADAPTER MODULE

SYSTEM SENSOR I3 SERIES SENSITIVITY READER

Converts any security panel to a commercial fire panel. • Converts 2 wire to 4 wire • Suits all security panels • Supports all Ademco detectors • Remote maintenance signal when used with i3 detectors • EZ walk test

• • • •

For new i3 series detectors Infra red reader No voltmeter required Outputs % per foot & text message • Hand held or connect to pole

Models Available: Part Number Description SDC Power supply module with 12V 1.2 AH battery SSL Listed

• Can be used on systems which require compliance with council regulations and BCA requirements • Approved to AS3786 for use with 2012H smoke alarms • Includes a dedicated standby battery • Integrates with all security control panels

REMOTE INDICATORS • • • • • •

1300 368 755

FIRE

Model Number: SENS-RDR

ADEMCO SMOKE DETECTOR COMPLIANCE MODULE

SALES

Description Non latching 12VDC 2 or 4 wire circuit Latching 12VDC 2 or 4 wire circuit Latching 24VDC 2 or 4 wire circuit

Circular design Fits standard conduit box Full range available Fitted with terminal block for easy termination Contrasting engraving ensures high visibility Can be used with 2012 smoke alarm

Models Available: Part Number RIFA RIIR RICS RIDS RILS

Description Fire alarm Fire detector in room Fire detector in concealed space Fire detector in duct Fire detector in lift shaft

TECH SUPPORT

1800 220 345

47

SMOKE & FIRE DETECTORS

Conventional Fire Detection Devices SYSTEM SENSOR PHOTO ELECTRIC DUCT PROBES • Streamlined design with clear cover over detection chamber • Telescopic sampling tube • Easy to install, mounting template supplied • Low air flow design • Field cleanable • Available in 2 wire 12/24VDC version or 4 wire version

SYSTEM SENSOR REFLECTOR TYPE PROJECTED BEAM SMOKE DETECTORS • • • • • • •

10m - 100m range 4 Wire 12/24VDC operation Ceiling or wall mount In-built alignment tool Automatic gain control Remote test station available Low current operation

Models Available: Part Number: Description DH100LP 2 wire 12/24VDC detector and probe DH100ACDCP 4 wire, multi voltage photo detector and probe DH200LP Analog detector and probe ST3 1m sampling tube RTS451 Remote test station

Models Available: Part Number: Description BEAM1224 Full beam kit including brackets and test equipment RTS451 Remote test station A77 EOL Module (optional)

ECO1003 SYSTEM SENSOR PHOTOOPTICAL SMOKE DETECTOR

ECORTU LASER TEST UNIT • Compact, battery operated • Tests ECO detectors remotely • Compatible with all ECO units • Low cost

• Photo optical detector • Unique chamber design controls the build up of dust • Low profile, plug in design • Laser test feature • 12/24VDC operation

ECO 4 WIRE RELAY BASES • • • • •

12VDC operation Compatible with all ECO detectors Compatible with all security panels Latching and non latching models One set of clean C/O contracts provided

FIRE

KAC MANUAL CALL POINTS • • • • •

Frangible glass element Micro switch operation ensures reliability Insert key for easy testing Wide variety of models and accessories Wireless version available

DETECTOR CLEANING TOOLS Mod 400R allows you to gain intelligent information from conventional systems. • Compatible with all System Sensor smoke detectors • Tests sensitivity of detectors • Reduces maintenance costs • Can be connected to any standard DC multimeter • Great diagnostic tool

48

SALES

1300 368 755

Models Available: Part Number: Description ECO12NL 12V Non latching relay base ECO12RL 12V Latching relay base

Models Available: Part Number: MCPR MCPWE MCPW MCPG MCPWDP MCPFLAP MCPWP MCPREXP MCPK MCPGR 5817/MCPR Models Available: Part Number MOD400R SMOKE EAD1200 EAD400D XR2 XR5 XP4

Description Red FIRE ALARM breakglass White EMERGENCY alarm breakglass White DOOR RELEASE breakglass Green DOOR RELEASE breakglass MCPW fitted with double pole switch Clear flap for all MCP Weatherproof FIRE ALARM breakglass Explosion proof MCPR Breakglass keyholder 5 pack replacement glass Wireless FIRE ALARM breakglass SSL Listed Description Field sensitivity module Test smoke150g can Invertible airduster 200ml Airduster 400ml Removal tool for low profile 100 series Removal tool for thermal 400 series 4m extension poles for XR tools

TECH SUPPORT

1800 220 345

SMOKE & FIRE DETECTORS

Conventional Smoke & Fire Detectors SHARP EYE SENSOR FLAME DETECTOR • UV/IR sensors detect broad range of hydrocarbon and non-hydrocarbon fires • Responds to fire events in milliseconds • Microprocessor-based for greater reliability • Immune to nuisance alarms caused by sunlight, welding, engine exhaust • Interfaces with standard alarm panels • Electromagnetic interference hardening, guards against environmental RFI • Built in test systems (BITS) capability for fault and alarm testing from remote site • Fast, easy installation using standard hardware • FM-approved, built to MIL STD, complies with NFPA 72 Models available: Part Number: 20/20 R 20/20 U 20/20 UB 20/20 L

Description Single IR Detector UV Detector c/w manual test UV Detector c/w built in test UV Detector c/w manual test

20/20 LB 20/20 I

UV detector c/w built in test Triple IR detector c/w manual test

20/20-03

Swivel Mounts

VESDA ASPIRATING SMOKE DETECTION

FIRE

VESDA draws air through a pipe network using a highly efficient aspirator. A sample of this air is filtered and then passes through the calibrated chamber of the laser detector where it is exposed to a stable calibrated light source. When smoke is present, light is scattered within the detection chamber and is instantly recognised by the highly sensitive receiver system.

Models available: Part Number: VESDA LP

VESDA SC

SALES

Description Laser Plus is designed for larger systems up to 2000 square metres and provides four outlet pipes from a common manifold. Laser Scanner offers the ability to identify, which of the four outlets is carrying smoke. Each inlet can be set for individual alarm levels providing maximum flexibility.

1300 368 755

VESDA LC

Laser Compact is a single zone unit for smaller applications and offers a cost effective solution while still offering all the standard features of the Laser Plus and Scanner.

TECH SUPPORT

1800 220 345

49

SOUNDERS & STROBES

Sounders & Strobes SYSTEM SENSOR SPECTRALERT HORNS AND STROBES • • • • • • • • • •

Models Available: Part Number: H1224W H1224R P2415W P2415R

Modern compact design Red & white colour options Horns - 12 or 24VDC operation Strobes - 12 & 24VDC operation Very low current consumption Two volume levels - field selectable Two horn tones - field selectable Supplied with universal mounting plate New T3 temporal evacuation tone 3 year warranty , UL and FM approved

Part Number: P1215R BBSR BBSW

Description White horn 12/24VDC, 101dBA Red horn 12/24 VDC, 101dBA White horn/strobe combination unit 24VDC,101dBA Red horn/strobe combination unit 24VDC, 101dBA

Description Red horn/strobe combination 12VDC, 101dBA Red surface backbox for Spectralert series White surface backbox for Spectralert series.

SYSTEM SENSOR MULTI ALERT HORN AND STROBES • • • • • • • • • •

Neat compact design Acoustically efficient design produces 105dBA @ 1m Horn 12 or 24VDC operation Low current 21mA Adjustable volume control Multi tone via dip switch selection Tone can be selected at fire panel Available in red or white ABS Conduit or cable entry bases available New T3 temporal evacuation tone

All EMA Devices require an ELP or ES Base Models Available: Part Number: EMA1224FR EMA1224FW EMA12FSSR EM24FRSSR

Description Full feature horn. Red, 12/24VDC Full feature horn. White. Requires Base Full feature horn/strobe - 12VDC Full feature horn/strobe - 24VDC

Part Number: ELPBR ELPBW ESBRS

Description Low profile cable base. Red Low profile cable. White Conduit surface base. Red

FIRE

SYSTEM SENSOR MULTI ALERT SOUNDER BASE • Neat compact low profile design • 12 or 24VDC operation • Suitable for direct mounting under detector or as a wall mounted unit • Suits detectors with 60mm mounting centres • 93 dBA @1m • Multi tone via dip switch selection • New T3 temporal evacuation tone • Tone can be selected at fire panel • Low current 21mA • Adjustable volume control Models Available: Part Number: Description DBS1224FL Full feature 12/24VDC sounder base in white LBLFB Fire label

50

SALES

1300 368 755

TECH SUPPORT

1800 220 345

SOUNDERS & STROBES

Sounders & Strobes SYSTEM SENSOR SOUNDER BASES • Low profile excellent appearance • Recessed and surface mounted models • Unit is capable of individual operation via detector base or group activation from an alarm panel • Compatible with full detector range • 83 dBA horn • Low current 15mA operation • 24VDC operation • New T3 temporal evacuation tone

Models Available: Part Number: B401BH SMB600

Description Dual function recessed/surface mount sounder includes detector base Surface mount conduit base to suit B401BH

AVAC 120 LIFE SAFETY VOICE ALARM SYSTEM AVAC 120 is a dual 60 watt amplifier warning system and is suitable for small to medium applications. The system provides Alert and Evac tones with selectable prerecorded voice messages,a unique Test mode, Fireman’s emergency PA, Public address and Background music inputs. The system may incorporate either a single AVAC 120 or a network consisting of up to 10 units can be installed for larger applications. The AVAC 120 is compatible with most analog or conventional Fire Systems allowing simple integration and control.

SYSTEM SENSOR MULTI ALERT SOUNDERS

Models Available: Part Number:

• • • • • •

PA400R PA400W

Red mini alert sounders 12/24VDC 90dBA White mini alert sounder 12/24VDC 90dBA

FIRE

Sounders 12V to 24V operation Low current operation Field selectable tones Red or white colour options New T3 temporal evacuation tone. 90 dBA sound level

Description

SYSTEM SENSOR FIRE BELLS • Underdome high decibel design • Low current motor driven operation • Polarised connection for fully supervised connection • 150mm and 200mm models • Suitable for outdoor/indoor applications

SALES

1300 368 755

Models available: Part Number:

Description

KMS8 KMS6 KMS12 WBB LBLFB

200mm 24VDC fire bell 150mm 24VDC fire bell 150mm 12VDC fire bell Weatherproof backbox Fire label

TECH SUPPORT

1800 220 345

51

FIRE ALARM

CONTROL

PANELS

Conventional Fire Alarm Control Panels LST 3000 CONVENTIONAL FIRE ALARM PANEL The 3000 series is a state of the art microprocessor based panel offering advanced programmable features. The display incorporates a full LCD alphanumeric display which provides total system information in an easy to read format, optional LED indicators are available. The 3000 is supplied in a parchment white finish to emphasise it’s modern features. • The 3000 is expandable in groups of 8 from 8AZF to 64AZF capacity • Real time date and clock • 10 fully programmable zone types, each with 7 output configurations • Optional AS1668 controls available • Serial 4 wire mimic feature • Up to 64 relay output zones can be added • Standard walk test facility • Full monitored bell and ACF outputs • Laptop programmable • Auto testing with watchdog technology to monitor system performance • Optional gas releasing modules available Models Available: Part Number LST303208 LST303216 LST303224

SYSTEM OPTIONS

GAS RELEASE MODULES

Part Number 3000DHTX 3000SW

Part Number 3000GRI 3000GRZ

Description Door holder power supply 3 amp upgrade DOS based programming software and cable for date and time panels only

FIRE

Part Number 3000BB 3024FS

Description First dual risk gas module Additional dual risk gas release module

EVACUATION MODULES

METAL WORK Description Battery box Flush surround for 24 zone panels

Part Number 20WEVAC 50WEVAC EVACPA

Description 20 watt EVAC system on plate, PA optional 50 watt EVAC system in kit form PA option for EVAC

AS1668 CONTROL

EXPANSION BOARDS

Part Number 1668A 1668B

Part Number 3000UG 3000803 3000813

Description AS1668 fan control first unit AS1668 fan control additional to AS1668A

3000MIMIC

52

Description 32 zone capacity 8 zones fitted 32 zone capacity 16 zones fitted 32 zone capacity 24 zones fitted

SALES

1300 368 755

Description 8 zone upgrade kit 8 way relay exp. board c/e cables & screws 8 way open collector o/p board c/w cables & screws LCD mimic panel

TECH SUPPORT

1800 220 345

FIRE ALARM

CONTROL

PANELS

Conventional Fire Alarm Control Panels LST 700 SERIES 2, 4 & 8 ZONE CONVENTIONAL FIRE PANELS Fully approved to AS7240 parts 2 & 4 the Series 700 offers an array of user and installer friendly features. Supplied in an attractive surface/flush mount enclosure each version provides simple user control via a standard 003 key switch. Each version supports up to 60 System Sensor Evacuation sounders. Suitable for Brigade monitoring or local systems

• • • • • •

SSL listed 1.5 amp PSU One man walk test Two wire mimic panels Suitable for Brigade monitoring 72 hr standby on standard batteries • Programmable time delays

Models Available: Part Number Description LST 702 LST 704 LST 708 LST 762 LST 760

2 zone panel with keyswitch control 4 zone panel with keyswitch control 8 zone panel with keyswitch control 4 way relay board Full feature Mimic Panel

Ewis EMERGENCY WARNING AND INTERCOMMUNICATION SYSTEM

Models available: Part Number: QE90 50WEVAC AVAC120 SP5W SP5WSM HORN10W TK86R TK86A MTS10WC

SALES

1300 368 755

FIRE

We offer a full range of EWIS incorporating MECP, Warden intercommunication points, and break glass alarms visual alarms. Our complete range offers systems which are fully approved to AS2220, as well as smaller systems, which provides AS2220 tones for AS1670.1 systems. 3 year warranty, SSL Listed. Description EWIS systems fully approved to AS2220 50 watt EVAC System Alert, Action, PA in battery box Dual Output with dedicated power supply 100mm ceiling speaker 5 watt 100mm surface mount speaker 5 watt 10 watt horn speaker Red strobe 24VDC Amber strobe 24VDC Multitone horn 12/24VDC

TECH SUPPORT

1800 220 345

53

ANALOG

FIRE SYSTEMS Analog Fire Systems BC 216 – ANALOG FIRE PANEL. The BC 216 is an analog system designed to provide the best solution for small, medium and large installations. Each panel supports one to four loops which can be divided into 144 zones. Systems can be networked up to incorporate a maximum of 127 panels with a total of 254 loops. Each analog loop will support a total of 198 devices, 99 sensors and 99 modules. The 32 bit processor provides the highest efficiency, speed and performance and allows a large number of advanced features to be incorporated. An example is detector trending which allows the system to predict into the future when detectors will require maintenance. The system also allows individual detector selection of the led blink function with an override feature on walk test selection. The BC216 incorporates a full LCD alphanumeric display with optional zone LEDS. Each panel in a custom GSSnetwork can be programmed to provide total system information and control or as a sub panel providing local control. All panels are connected via a high speed redundant network which also incorporates fail safe operation if the network fails. Models available: Part Number: BC 216-1 BC 216-2 BC 216CE LIF64-1 LG-3

FIRE 54

SALES

Description One to four loop analog FIP One to 254 loop analog networkable FIP 19inch Rack mounted FIP Single loop expansion card Dual loop expansion card

ABF216 – REMOTE DISPLAY PANEL

1700 – ANALOG IONISATION SMOKE DETECTOR

Compact display unit provides full control and display from a BC216 fire panel. May be installed on the GSSnet and programmed to provide complete network information and control or any other combination required. The unit provides a 4 line 20 character backlit display. Connection to the network is fully redundant and the standard wiring distance is 1200 metres.

A low profile design using a unipolar dual chamber system consisting of a sensing and a reference chamber. The BC216 incorporates intelligent algorithms to compensate for contamination of the chamber.

2700 – ANALOG PHOTO OPTICAL SMOKE DETECTOR

6500 – ANALOG HEAT DETECTOR

A low profile design using a photo optical chamber to sense the presence of visible smoke. The BC216 incorporates intelligent algorithms to control the influence of dirt and to predict the date when a detector will require cleaning.

A low profile heat detector for use in areas where smoke detectors are unsuitable. Unique algorithms allow the use of a single model for multiple sensitivities. These intelligent algorithms enable the BC216 to determine fixed temperature or rate of rise operation and to provide the correct level of detection.

2700TEM – ANALOG MULTISENSOR DETECTOR

7251 – OPTICAL LASER SMOKE DETECTOR

One detector incorporating both photo optical and heat detection elements which uses custom algorithms to evaluate the development of a true fire. These intelligent algorithms compensate for the influence of dirt which further reduces the potential for false alarms.

A low profile high sensitivity optical detector using a custom chamber using the latest laser technology. The detector is compatible with the full range of analog devices and can provide high sensitivity protection at a much lower cost than air sampling systems. The laser is ideal for areas such as electronic equipment rooms and clean rooms to provide the earliest possible detection

1300 368 755

TECH SUPPORT

1800 220 345

ANALOG

FIRE SYSTEMS Analog Fire Systems B501 – DETECTOR BASE

FTX FILTREX ANALOG OPTICAL SMOKE DETECTOR

Analog base for use with the above analog detectors. SEMS terminations with coloured markings for easy connection.

The optical detector for heavily contaminated areas is equipped with two 32 micron filters which prevent the entry of dust and water particles. The filters allow smoke to enter the detection chamber whilst preventing the ingress of dust or water particles or insects. A ventilation fan is provided to ensure the correct circulation of air through the detection chamber.

M500KAC – MANUAL CALL POINT

DH200LP – DUCT PROBE A compact analog duct probe using photo optical principles to sense the presence of visible smoke within air conditioning ducts. The unit is fully sealed to allow it’s use in very low air flow applications and is extremely simple to install. A variety of sample tubes are available to suit any situation.

An addressable manual callpoint for use on an analog loop. Each unit is addressed as a loop module by the BC216. May be surface mounted or flush mounted using an adaptor kit.

M503ME – MICRO MONITOR MODULE

An addressable loop module to allow the connection of conventional detectors and intrinsically safe detectors to the analog loop. For surface mounting a SMB500 mounting box is required.

A compact micro module to allow the connection of hard contact devices such as pressure switches or water flow switches to the analog loop.

MONITOR MODULES

IM-10 – MONITOR MULTIMODULE

Addressable input modules to allow the connection of either one or two supervised hard contact input zones to the addressable loop. Each module incorporates a short circuit isolator to provide additional loop protection. One module also incorporates an output relay in addition to the input facility. For mounting, modules require either a surface box or a din rail Part Number: Description M210E Single Hard contact supervised input module M220E Dual hard contact supervised input module M221E Dual hard contact supervised input module with one clean contact Output relay

SALES

1300 368 755

FIRE

M512ME – CONVENTIONAL ZONE MODULE

An addressable input module providing ten supervised hard contact inputs to the analog loop. Surface mounting requires the use of a multimodule enclosure.

TECH SUPPORT

1800 220 345

55

ANALOG

FIRE SYSTEMS Analog Fire Systems M201-E-240 – CONTROL MODULE Addressable modules to provide 240V clean contact switching from the addressable loop. This model provides clean contacts which are suitable for low voltage switching. The unit incorporates a short circuit isolator to provide additional loop protection. Part Number: Description M201E-240 Single 240V AC clean contact with surface mount box M201E-240-DIN Single 240V AC clean contact Din rail mount

6 WAY CONTROL MULTIMODULES Addressable output modules providing six discreet outputs in either a supervised or clean contact relay format, dependant on the module selected. Surface mounting requires the use of a multimodule enclosure. Part Number: Description SC-6 6 way supervised Control output module CR-6 6 way clean contact Relay output module

MODULE MOUNTING & ENCLOSURES

FIRE

Surface mounting enclosures to facilitate the mounting of loop modules in the field. Part Number: Description M200E-DIN Base for rail carrier -single M200E-PMB Base for mounting plate-single M200SMB Surface mounting box-single SMB500 Surface box for M500 series M200-SMB-MMSurface mounting box for multimodules

M201E – CONTROL MODULES Addressable modules to provide either supervised or clean contact relay outputs from the analog loop. The selection of output type is via an onboard dip switch. This module incorporates a short circuit isolator to provide additional loop protection.

DBS LOOP SOUNDER White plastic multitone sounder designed to mount under a detector, accommodates the B501 analog base. Can be powered from the analog loop and individually controlled by the BC216. Part Number: Description DBS24ALW Loop activated and powered sounder DBS24AEW Loop activated, externally powered sounder

EMA LOOP HORN Compact electronic multitone sounder designed to be powered from the analog loop.105db output to meet BCA requirements. Individually controlled by the BC216. Requires mounting base. Part Number: Description EMA24ALW White loop activated and powered horn EMA24AEW White loop activated, externally powered horn ELPBW White low profile mounting base

M200XE – ISOLATOR MODULE Isolator module to disconnect the affected area of a loop when a short circuit occurs. These should be installed to at least meet the minimum requirements of AS1670.1

56

SALES

1300 368 755

TECH SUPPORT

1800 220 345

WIRELESS FIRE ALARM SYSTEMS

Vista Addressable Fire Systems The Vista fire system is suitable for both commercial and residential applications. The system provides the choice of either 250 wireless zones via a 5881EH receiver or 250 addressable wired zones via the standard V-Plex loop or any combination of these technologies.

VISTA FIP – LOCAL

VISTA FIP – MONITORED

Suitable for commercial and residential applications which do not require connection to the fire monitoring network. Control is via a single 003 keyswitch to provide secure yet simple operation. System incorporates a 1000 real time event log.

Used where the system requires fire monitoring in accordance with B.C.A. Provides all the features of the Vista 250FBL. 1000 Event Log

SSL Listed

Models Available: Part Number: Description Vista 2128FB 128 Zone addressable control - Fire monitored applications Vista 2250FB 250 Zone addressable control - Fire monitored applications

FSA LED ANNUNCIATOR • • • • •

6160CR – ALPHA ANNUNCIATOR

8 + 24 Zone models Silence and reset control Key switch input Fully supervised Connection via a 4 wire data bus.

• Large 32 character alpha display • Illuminated controls • Complete system information and control • Connection via a 4 wire data bus • Fully supervised

Models Available: Part Number: Description FSA8 8 Zone Annunciator FSA24 24 Zone Annunciator

5808 – WIRELESS SMOKE DETECTOR WIRELESS SMOKE ALARM

5809 – WIRELESS THERMAL DETECTOR • Reliable electro mechanical operation • Available in both rate of rise fixed temp and fixed temp models • Onboard test switch • Fully supervised

• Dual approval to AS1603.2 and AS3786 • Photo optical smoke detector • Std “B” type thermal element • Onboard sounder • “Smart” chamber supervision • Fully supervised

Models Available: Part Number: Description 5809 A Type thermal 5809B B Type thermal 5809C C Type thermal

SALES

1300 368 755

TECH SUPPORT

1800 220 345

57

FIRE

Models Available: Part Number: Description Vista 128FBL 128 Zone addressable control - Local applications Vista 250FBL 250 Zone addressable control - Local applications

SSL Listed

WIRELESS FIRE ALARM SYSTEMS

Vista Addressable Fire Systems 5817CB – WIRELESS HARD CONTACT TRANSMITTER

5817/MCPR – WIRELESS CALL POINT

The 5817 is a compact transmitter which can be connected to virtually any device which provides contact closure. This includes, detectors, manual call points, flow switches, and pressure switches.

• Available in Red - “Fire” or white “Emergency” enclosures • Frangible element • Key operated test switch • Fully supervised wireless operation.

5880RPF – WIRELESS FIRE REPEATER

5881 EH – WIRELESS FIRE RECEIVER

• Installs remotely from fire panel • Boosts weak signals from detectors and transmitters • Fully supervised by fire panel • Can be remotely powered

• 250 Zone receiver • Supports all 5800 series wireless fire devices • Listed for commercial fire installations when used with the Vista-250FB and Vista-128FB controls

4209U – VPLEX ADDRESSABLE ZONE MODULE

4101SN – VPLEX ADDRESSABLE RELAY MODULE

• 4 conventional two wire zones • Up to 25 detectors on each zone • Fully supervised operation.

Compact VPlex input/output module which is ideal for flow switch/solenoid valve combinations • One supervised zone input • One set of 2 amp change over contacts.

5192SD – VPLEX ADDRESSABLE SMOKE

4297 – VPLEX ADDRESSABLE LOOP ISOLATION/BOOSTER MODULE

FIRE

• Photo electronic smoke detector • Low profile design • V-Plex addressable loop device • Automatic maintenance reporting • Simple 2 wire installation • DIP switch or serial number programmable.

4193SNF – SINGLE ZONE INPUT MODULE • One zone with EOL supervision • Small & Compact • Enables any open contact device to be interfaced with an addressable loop

58

SALES

1300 368 755

• Protects the Vplex loop against short circuit conditions • Boosts power to the loop on long runs

4204 – VPLEX OUTPUT MODULES • Provides 4 relays with c/o contacts or 2 supervised bell relay outputs • Fully programmable and supervised Models Available: Part Number: Description 4204F 4 relay outputs c/o contacts 4204CF 2 bell outputs supervised

TECH SUPPORT

1800 220 345

FIRE ACCESSORIES Magnetic Door Holders ELECTRO MAGNETIC DOOR HOLDERS Electro magnetic door holders which are robust, reliable and price competitive. The range includes both floor/ceiling and wall models and all are very efficient with low current consumption Models available: Part Number: 1350 ESDR150S ESDR300S ESDRW ESDRF ESDRW12 ESDRF12 ANVIL DHPS DHPS4 DHPSX

Description Surface mounted dual tappings 25/50kg Door holder with adjustable bracket 150mm Door holder with adjustable bracket 300mm 24V magnetic wall mount with release switch 24V magnetic floor mounted with release switch 12V magnetic wall mount with release switch 12V magnetic floor mounted with release switch Replacement anvil for door holders 1.5amp D/H power supply 4 amp D/H power supply Larger sizes available on request

Batteries & Cable BATTERIES Models Available: Part Number: PS1212 PS1265 PS0610 PS1217 PS1226

Description 12V 1.2 AH Battery 12V 7 AH Battery 6V 10 AH Battery 12V 17 AH Battery 12V 2.6 AH Battery

Other sizes on application

FIRE CABLE Models Available: Part Number: FC75 FC14020 FC150

Description .75mm two core RED sheathed per 100m 14/020 four core RED Sheathed per 100m 1.5 mm two core RED Sheathed per 100m

FIRE

Other sizes available on request

Sprinkler Systems SYSTEM SENSOR WATERFLOW SWITCH • • • • •

Computer designed paddles Durable metal enclosure Visual indication Sealed retard chamber Durable twin synchronised switches • Tamper resistant.

SALES

1300 368 755

Models available: Part Number: Description WFD20E 50mm Vane type waterflow switch, adjustable time delay WFD25E 65mm Vane type waterflow switch, adjustable time delay WFD30E 80mm Vane type waterflow switch, adjustable time delay WFD40E 100mm Vane type waterflow switch, adjustable time delay WFD60E 150mm Vane type waterflow switch, adjustable time delay WFD80E 200mm Vane type waterflow switch, adjustable time delay WFDT Tee Tap waterflow, adjustable time delay WFDTNR Tee Tap waterflow - non retard type

TECH SUPPORT

1800 220 345

59

FIRE ACCESSORIES Sprinkler Systems SYSTEM SENSOR OSY2 TAMPER SWITCHES • Fit outside screw and yoke gate valves • Easy installation using assembled bolts and open ended bottom bracket • Three position switch gives vandal and valve closed signals • Operating shaft is adjustable - no cutting required • Robust metal construction with weather seal on cover • Optional alarm switch protects cover from removal. UL & FM Approved, 3 Year Warranty

SYSTEM SENSOR PRESSURE SWITCHES • • • • • •

Alarm and supervisory models Sensitivity adjustment wheel Bellows actuated Tamper Resistant 10-200PSI operation 250 PSI Max pressure.

Models Available: Part Number: EPS101 EDP102 EPS1201 EPS1202

Description Alarm pressure switch single pole Alarm pressure switch double pole Supervisory low pressure Supervisory high/low

FIRE

BURKERT L282 SOLENOID TEST VALVE • Pilot valve design allows testing of water flow without power being available • Solid brass construction • Replaceable solenoid assembly • Easy to install • Manual override facility is standard • 24VDC operation.

60

SALES

1300 368 755

TECH SUPPORT

1800 220 345