Wash unit, clean all weld joints, and visually inspect for cracking or damage. Indicate the location of any cracks on the appropriate drawing views by marking the approximate location and length of crack. For reference purposes, draw an arrow to the crack location, number the arrow, and indicate whether inside or outside, top or bottom view, as appropriate. Describe each crack on page 4. Komatsu Serial Number
CEHQ003201
Customer Name
830E FRAME INSPECTION REPORT
Location
Page 1
CEHQ003201
830E FRAME INSPECTION REPORT
Page 2
CEHQ003201
830E FRAME INSPECTION REPORT
Page 3
KOMATSU 830E DUMP TRUCK - FRAME INSPECTION REPORT
Describe all frame cracks or related damage. Reference Number
Describe Position Of Crack Or Damage
Crack Length
Parent Metal
Weld Metal
Previous Repair
SKETCH
CEHQ003201
830E FRAME INSPECTION REPORT
Page 4
KOMATSU 830E DUMP TRUCK - FRAME INSPECTION REPORT
With the truck unloaded and parked on level ground, inspect the Hydrair suspensions and record these dimensions: PISTON EXTENSION
DIRT RING HEIGHT
LEFT FRONT RIGHT FRONT LEFT REAR RIGHT REAR Check and record the dump body lateral guide clearances: LEFT CLEARANCE RIGHT CLEARANCE Check and record body pad condition and adjustment: REAR PAD
REAR CENTER PAD
FRONT CENTER PAD
FRONT PAD
LEFT RIGHT Check and record dump body pivot bushing condition. OK WORN
Thank you for interesting in our services. We are a non-profit group that run this website to share documents. We need your help to maintenance this website.