Fiber Optics

This specification covers fibers generally used in the cable supplied/distributed by NEXTERA Optical Performance - Single mode Fibers Fiber Size

9/125 um

Operational Wavelength

1,310 nm

Attenuation dB/Km

< 0.35

Bandwidth Mhz x km

–

Optical Performance - Multi mode Fibers Fiber Size

50/125um 62.5/125 um 50/125um 62.5/125 um 62.5/125 um

Operational Wavelength

Attenuation dB/Km

Bandwidth Mhz x km

850 nm

< 2.7

> 500

1,300 nm

< 0.8

> 800

850 nm

< 3.2

> 200

1,300 nm

< 1.0

> 600

850 nm

< 2.7

> 500

1,300 nm

< 0.8

> 500

850 nm

< 3.2

> 160

1,300 nm

< 1.0

> 500

850 nm

< 3.2

> 200

Optical Performance Hi-Band Fibers Fiber Size

50/125 um 62.5/125 um

Operational Wavelength

Attenuation dB/Km

Bandwidth Mhz x km

850 nm

< 2.7

> 400

1,300 nm

< 0.8

> 800

850 nm

< 3.2

> 200

Optical Performance Max-Band Fibers Fiber Size

50/125 um

Operational Wavelength

Attenuation dB/Km

Bandwidth Mhz x km

850 nm

< 3.0

> 1,500

1,300 nm

< 1.0

> 500

OPTICAL FIBER

CABLES

NETWORK

S E RV I C E S

Choosing NEXTERA as your cable supplier simply puts you one step ahead....

10 1 0 1 0 11 1 0 1 10 1 0 1 0 11 1 0 0 1 0 10 1 0 1 1 10 1 0 1 0 0 1 1 1 0 1 0 1 0 11 1 0 01 10 1 0 10 1 0 1 1 0 1 1 1 0 1 0 1 0 0 0 1 1 101 1010 10 1 0 1 0 01 0 10 1 0 1 1 1 1 0 1 10 1 0 1 0 0 1 1 1 0 0 1 0 1 10 1 0 1 0 1 1 1 0 1 1 0 1 0 10 10101 11 0 0 1 0 11 10 10 1 01 10 1 0 1 0 1 1 1 0 1 0 0 1 0 1 1 11 1 0 10 1 1 0 0 1 0 1 0 1110 10 1 01 1 1 1 1 0 1 0 1 0 1 1 10 1 0 1 0 0 0 1 1 1 0 1 0 1 0 1 1 0 1 0 11 10 10 1 0 0 1 0 111 10 1 0 1 1 1 1 0 1 1 01 1 1 1 111 1 0101 1 0 1 10 1 0 1 0 0 1 1 1 0 1 0 1 0 0 0 11 10 10 1 01 1 1 1 0 1 0 1 0 1 0 1 0 1 01 11 1 0 01 010 111 1 0 1 0 1 0 1 0 1 0 11 10 10 1 10 1 0 0 1 01 1 0 1 1 1 1 11 0 1 0 1 0 0 1 0 1 0 0 1 0 11 10 10 1 01 1 1 1 01 1 0 1 0 1 0 1 0 1 1 1 101 1 0 1 0 0 11 1 0 1 0 1110 10 1 11 01 1 1 0 1 1 1 0 0 1 0 11 0 1 0 1 0 1 1 0 1 0 111 0 11 10 10 1 111 01 1 1 1 0 0 1 0 1 0 1 0 11 0 10 10 1 01 1 1 1 01 1 0 1 0 1 0 1 101 1 0 11 1010 0 1 0 11 10 10 1 10 1010 01 1 1 1 0 1 1 0 1 0 1 0 111 1 1 1 0 1 0 0 1 0 11 10 10 1 01 1 1 1 0 101 1 1 0 1 0 1110 10 1 11 11 01 1 1 1 0 0 1 0 1 0 1 0 11 0 1 0 1 0 1 1 0 1 0 1 111 0 11 10 10 1 01 1 1 1 0 0 1 0 1 0 1 0 11 11 0 1 1 0 101 10 10 1 101 0 1 0 11 10 10 1 01 01 1 1 1 0 1 0 1 0 0 1 0 1 1 1 1 1 1 0 1 0 1 0 1 1 0 111 0 11 1

NEXTERA is the largest stockist/distributor of all types of optical fiber cables in Pakistan and dedicated to supply and market a broad range of indoor/outdoor fiber optic cables to meet any of your application for voice, video and data transmission. Such applications include transmission of light signals for Telecom Backbones, Access Networks/MANs, LAN, and point to point links in cities, buildings, factories, campuses and FTTH, FTTD. Our wide variety of optical fiber cables offer the flexibility, direct connectability and design versatility necessary to satisfy the diverse requirement existing in high performance fiber optic application up to light distances. 0 01 01 01 10 10 111 010 10 0 010 11 10 1 01 101 110 10 0 01 010 0101 1010 101 0 1 11 0 1 1 11 110 101 101 101 10 11 110 010 011 010 10 10 11 101 0101 0111 1010 010 0 1 1 1 11 101 010 1011 1101 010 0 1 1 1 11 1101 1010 1010 1101 010 0 11 110 10 101 101 01 1 1 1 0 11 10 10 0 0 1 0 11 101 0101 11101 101 1010 1 0 0 11 101 010 111 010 01 1 0 1 1 1 11 1010 0101 1011 010 1010 0 1 1 0 11 11 110 101 101 101 11 1110 1010 1011 0 010 1 11 11 1101 11

> Leading supplier of fibre optic cables > Combined qualities/know-how from datacom/telecom markets > Customized solutions

> Long-term field experience and technical competence in fibre optics > Flexible and reliable service

110 010 110 0 01 10 1 01 1010 0101 10 1 1 0 0 01 0101 0110 1 01 010 10110 10 01 010 0101 110 01 101 010 10 1 1 0 0 01 0101 0110 1 01 10 10 1 0 01 1010 0110 0 0 1 1 01 010 0101 0 1 01 011 01 101 0110 0 1 01 010 01

> Wide product program

> Stock availability of key products > Competitive pricing

Simplex and Duplex Zipcord Cable

Optical Fiber 250um Acrylate Fiber Coating 900um Diameter Tight-Buffer Aramid Strength Member Simplex

Outer Jacket

Duplex Zipcord

Simplex and Duplex Cables are best suitable for indoor use, such as routing connections in patching systems. Available in one and two fiber designs, these cables are optimized for ease of connectorization and use as patchcords and pigtails. Un-cabled fiber, coated only with a thermoplastic buffer, is also available for pigtail application inside equipment.

PART #

DESCRIPTION

MANUFACTURER/SUPPLIER

NC-TBSM02-D OC-TBSM02-D NC-TBMM02-D50 OC-TBMM02-D50

9/125 Duplex (Singlemode) Zipcord 9/125 Duplex (Singlemode) Zipcord 50/125 Duplex (Multimode) Zipcord 50/125 Duplex (Multimode) Zipcord

NEXTERA Optical Cable Corp., USA NEXTERA Optical Cable Corp., USA

For 62.5um fiber and Simplex style cables requirement, please contact our customer service department.

F AX : (051) 2855227

W EB :

WWW . NEXTERA . COM . PK

E MAIL :

INFO @ NEXTERA . COM . PK

101

OPTICAL FIBER NETWORK

CABLES

S E RV I C E S

Distribution Cables

Aramid Strength Member Optical Fiber Acrylate Fiber Coating Central Filler

A – Overall Cable Diameter B – Outside Diameter of Jacketed Inner Cable

A B

Color-Coded 900um Diameter Tight Buffer Steel Tape Armor, 6 mil Corrugated Copolymer Coated Polythylene Outer Jacket

Distribution Cables are multi fiber cables utilizing 900 um tight-buffered fibers surrounded by aramid yarn strength members and a flame-retardant outer jacket. The connectors may be installed directly on the 900um buffered fiber at the Optical Fiber Distribution and termination points. The distribution style cables are suitable for both indoor and outdoor use and can be used in trunking, LAN and distribution applications where small size, lightweight, and versatile installation capability are required. Armored distribution cables are also available for additional protection in direct burial and aerial installations. NEXTERA will connetorize directly onto 900um fiber, if required.

PART #

DESCRIPTION

APPLICATION

MANUFACTURER/SUPPLIER

NC-50MM06-DS 6 Fiber, Distribution, MM 50/125, Indoor/Outdoor(Duct) NEXTERA OC-50MM06-DS 6 Fiber, Distribution, MM 50/125, Indoor/Outdoor(Duct) Optical Cable Corp., USA NC-50MM12-DS 12 Fiber, Distribution, MM 50/125, Indoor/Outdoor(Duct) NEXTERA OC-50MM12-DS 12 Fiber, Distribution, MM 50/125, Indoor/Outdoor(Duct) Optical Cable Corp., USA OC-50MM06-DSA 6 Fiber, Distribution, MM 50/125, Armored Outdoor (Direct burial/aerial) Optical Cable Corp., USA OC-50MM12-DSA 12 Fiber, Distribution, MM 50/125, Armored Outdoor (Direct burial/aerial) Optical Cable Corp., USA Note: 9/125SM, 50/125MM, hybrid cables and higher fiber counts cable are available upon request. Please contact for further details.

Figure-8 Messenger Cable

Messenger Strength Member

Aramid Strength Member Strength Member/Fiber Optical Fiber Acrylate Fiber Coating Polylefin Outer Jacket

Color-Coded 900um Diameter Hard Elastometric Tight-Buffer

Ripcord

Figure-eight Messenger cables are best suitable for new installations. The figure-eight messenger cable reduces installation time and cost by approximately 50% compared to separate installation of a messenger wire and the lashing of the cable to the messenger. Wide operating temperature range of -55°C to +85° C.

PART #

DESCRIPTION

APPLICATION

MANUFACTURER/SUPPLIER

OC- 9SM06-F8M OC-50MM06-F8M

6 Fiber, Figure Eight, SM 9/125, 6 Fiber, Figure Eight, MM 50/125,

Outdoor(Aerial) Outdoor(Aerial)

Optical Cable Corp., USA Optical Cable Corp., USA

Note: 9/125SM, 50/125MM, hybrid cables and higher fiber counts cable are available upon request. Please contact for further details.

Tactical Cables Optical Fiber Acrylate Fiber Coating Color-Coded 900um Diameter Hard Elastomeric Tight-Buffer Aramid Strength Member Core-LockedTM Polyurethane Jacket Flame retardant available Tactical cables are extremely strong, lightweight, rugged and survivable. These tight-buffer cables designed for tactical field use and in natural disastrous situations (flood and earthquakes etc) to establish new communication links or emergency restorations. Suitable for an outdoor applications, tactical cables can be deployed on the ground in all terrain, including severe environments. These cables can also be used in deployment/retrieval applications such as video coverage of news events or oil exploration.

PART #

DESCRIPTION

APPLICATION

MANUFACTURER/SUPPLIER

NC-09SM04-TC NC-50MM04-TC

4 Fiber, Tactical Cable, SM 9/125 4 Fiber, Tactical Cable, SM 50/125

(Outdoor/Field Use) (Outdoor/Field Use)

NEXTERA NEXTERA

101

FOR

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

PHONE: (051) 2855224-5

OPTICAL FIBER

CABLES

NETWORK

S E RV I C E S

Unitube Cable Corrugated steel tape Tube filling compound UNI Loose tube

Steel wire Water-blocking material Fiber PE sheath

Unitube cables are, compact, lightweight, small in diameter and installation friendly, while offering the crush resistance and tensile strength similar to traditional loose tube cables. In unitube cable, the fibers, are positioned in a central loose tube, filled with water-resistant filling compound. This tube is covered by water-blocking material with a layer of strength members to provide the cable with the required tensile strength. The cable sheath is made by polyethylene (PE). These cables are best suitable to establish LAN backbones, CATV Networks or to be laid in tunnels or in duct applications. Armored unitube cables are also available for direct burial applications.

PART #

DESCRIPTION

APPLICATION

MANUFACTURER/SUPPLIER

DD-9SM06-UNI NC-9SM06-UNI DD-9SM12-UNI NC-9SM12-UNI DD-50MM06-UNI NC-50MM06-UNI DD-50MM12-UNI NC-50MM12-UNI DD-9SM06-UNIA NC-9SM06-UNIA DD-9SM12-UNIA NC-9SM12-UNIA DD-50MM06-UNIA NC-50MM06-UNIA DD-50MM12-UNIA NC-50MM12-UNIA

6 Fiber, Unitube, SM 9/125, 6 Fiber, Unitube, SM 9/125, 12 Fiber, Unitube, SM 9/125, 12 Fiber, Unitube, SM 9/125, 6 Fiber, Unitube, MM 50/125, 6 Fiber, Unitube, MM 50/125, 12 Fiber, Unitube, MM 50/125, 12 Fiber, Unitube, MM 50/125, 6 Fiber, Unitube, SM 9/125, Armored 6 Fiber, Unitube, SM 9/125, Armored 12 Fiber, Unitube, SM 9/125, Armored 12 Fiber, Unitube, SM 9/125, Armored 6 Fiber, Unitube, MM 50/125, Armored 6 Fiber, Unitube, MM 50/125, Armored 12 Fiber, Unitube, MM 50/125, Armored 12 Fiber, Unitube, MM 50/125, Armored

Indoor/Outdoor(Duct) Indoor/Outdoor(Duct) Indoor/Outdoor(Duct) Indoor/Outdoor(Duct) Indoor/Outdoor(Duct) Indoor/Outdoor(Duct) Indoor/Outdoor(Duct) Indoor/Outdoor(Duct) Indoor/Outdoor(Direct Burial) Indoor/Outdoor(Direct Burial) Indoor/Outdoor(Direct Burial) Indoor/Outdoor(Direct Burial) Indoor/Outdoor(Direct Burial) Indoor/Outdoor(Direct Burial) Indoor/Outdoor(Direct Burial) Indoor/Outdoor(Direct Burial)

Draka, Denmark NEXTERA Draka, Denmark NEXTERA Draka, Denmark NEXTERA Draka, Denmark NEXTERA Draka, Denmark NEXTERA Draka, Denmark NEXTERA Draka, Denmark NEXTERA Draka, Denmark NEXTERA

Note: Please contact, for higher fiber and hybrid optical fiber cabe requirements.

Loose Tube Cable Aramid Yarns

FRP or Steel wire central strength member Filler

Cable Filling Corrugated Steel Tape

Optical Fiber

Inner Sheath

Jelly Filling

Outer Sheath

Loose Tube

Loose tube cable is designed to endure outside temperatures, high moisture conditions. The fibers are loosely packaged in gel filled buffer tubes to repel side elements. The main application for these cables are for direct burial under difficult laying conditions. The single or double layer of steel tape armoring provides protection against rodents and other elements, while directly buried in ground. These cables are best suitable for outdoor applications to establish Telecom and CATV Trunk in direct burial applications. Please contact for additional fiber counts.

PART #

DESCRIPTION

APPLICATION

MANUFACTURER/SUPPLIER

NC-9SM06-LTA NC-9SM12-LTA NC-9SM24-LTA NC-50MM06-LTA NC-50MM12-LTA

6 Fiber, Loose Tube, SM 9/125, Armored 12 Fiber, Loose Tube, SM 9/125, Armored 24 Fiber, Loose Tube, SM 9/125, Armored 6 Fiber, Loose Tube, MM 50125, Armored 12 Fiber, Loose Tube, MM 50125, Armored

Outdoor(Direct Burial) Outdoor(Direct Burial) Outdoor(Direct Burial) Outdoor(Direct Burial) Outdoor(Direct Burial)

NEXTERA NEXTERA NEXTERA NEXTERA NEXTERA

Note: Please contact, for other manufacturers cables, higher fiber counts and duct type loose tube cables,

F AX : (051) 2855227

W EB :

WWW . NEXTERA . COM . PK

E MAIL :

INFO @ NEXTERA . COM . PK

101

OPTICAL FIBER NETWORK

PATCHCORDS ---- MULTIMODE

S E RV I C E S

Interconnect your Optical Network with the highest quality Optical Fiber cable assemblies from NEXTERA NEXTERA offers a wide varity of singlemode and multimode optical fiber cable assemblies in a wide variety of configurations including patchcords, pigtails and in simplex and duplex styles, in several standard lengths, and special lengths to order. State of the art equipment and increased productivity allows NEXTERA to continue offering the best value in the industry! All NEXTERA patchcords are tested utilizing the industry's latest equipment and offer superior quality at low prices on all styles of patchcords. 100% Guaranteed! Patchcords are available with SC, MT-RJ, LC, ST, FC, DIN and E2000 or combinations of connectors. For Pigtail requirement please contact NEXTERA. Multimode Patchcords Part #

MT-RJ to ST Duplex

MT-RJ to SC Duplex

MT-RJ to MT-RJ

ST to ST Simplex

101

FOR

SC to SC Duplex NC-SCPCM-D1 NC-SCPCM-D3 NC-SCPCM-D5 NC-SCPCM-D10 MT-RJ to MT-RJ Duplex NC-MTRJ-D1 NC-MTRJ-D3 NC-MTRJ-D5 NC-MTRJ-D10 LC to LC Duplex NC-LCM-D1 NC-LCM-D3 NC-LCM-D5 NC-LCM-D10 E-2000 to E-2000 Duplex DS-E2000M-D1 DS-E2000M-D3 DS-E2000M-D5 DS-E2000M-D10 SC to MTRJ Duplex NC-SCMT-D1 NC-SCMT-D3 NC-SCMT-D5 NC-SCMT-D10 SC to ST Duplex NC-SCST-D1 NC-SCST-D3 NC-SCST-D5 NC-SCST-D10 MT-RJ to ST Duplex NC-MTST-D1 NC-MTST-D3 NC-MTST-D5 NC-MTST-D10

Description SC-SC Multimode duplex 1m SC-SC Multimode duplex 3m SC-SC Multimode duplex 5m SC-SC Multimode duplex 10m MTRJ-MTRJ Multimode 1m MTRJ-MTRJ Multimode 3m MTRJ-MTRJ Multimode 5m MTRJ-MTRJ Multimode 10m LC-LC Multimode Duplex 1m LC-LC Multimode Duplex 3m LC-LC Multimode Duplex 5m LC-LC Multiemode Duplex 10m E2000-E-2000 Multimode Duplex 1m E2000-E2000 Multimode Duplex 3m E2000-E2000 Multimode Duplex 5m E2000-E2000 Mulitmode Duplex 10m SC-MTRJ Multimode 1m SC-MTRJ Multimode 3m SC-MTRJ Multimode 5m SC-MTRJ Multimode 10m SC-ST Multimode duplex 1m SC-ST Multimode duplex 3m SC-ST Multimode duplex 5m SC-ST Multimode duplex 10m MTRJ-ST Multimode 1m MTRJ-ST Multimode 3m MTRJ-ST Multimode 5m MTRJ-ST Multimode 10m

SC to E2000 Duplex

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

SC to ST Duplex

PHONE: (051) 2855224-5

OPTICAL FIBER

PATCHCORDS ---- SINGLEMODE

NETWORK

S E RV I C E S

Singlemode Patchcords Part #

Description

SC to SC Duplex NC-SCPCS-D1 NC-SCPCS-D3 NC-SCPCS-D5 NC-SCPCS-D10 LC to LC Duplex NC-LCS-D1 LC-LC NC-LCS-D3 LC-LC NC-LCS-D5 LC-LC NC-LCS-D10 LC-LC E-2000 to E-2000 Simplex DS-E2000S-S1 DS-E2000S-S3 DS-E2000S-S5 DS-E2000S-S10 FC to FC Simplex NC-FCFC-S1 NC-FCFC-S3 NC-FCFC-S5 NC-FCFC-S10 FC/PC to DIN Simplex DS-FCDIN-S1 DS-FCDIN-S3 DS-FCDIN-S5 DS-FCDIN-S10 DIN to DIN Simplex DS-DIN-S1 DS-DIN-S3 DS-DIN-S5 DS-DIN-S10

SC-SC Singlemode duplex 1m SC-SC Singlemode duplex 3m SC-SC Singlemode duplex 5m SC-SC Singlemode duplex 10m Singlemode Duplex 1m Singlemode Duplex 3m Singlemode Duplex 5m Singlemode Duplex 10m

SC to LC Duplex

E2000-E2000 Singlemode Simplex 1m E2000-E2000 Singlemode Simplex 3m E2000-E2000 Singlemode Simplex 5m E2000-E2000 Singlemode Simplex 10m FC/PC-FC/PC Singlemode Simplex 1m FC/PC-FC/PC Singlemode Simplex 3m FC/PC-FC/PC Singlemode Simplex 5m FC/PC-FC/PC Singlemode Simplex 10m FC to FC Simplex

FC/PC-DIN Singlemode Simplex 1m FC/PC-DIN Singlemode Simplex 3m FC/PC-DIN Singlemode Simplex 5m FC/PC-DIN Singlemode Simplex 10m DIN-DIN Singlemode Simplex 1m DIN-DIN Singlemode Simplex 3m DIN-DIN Singlemode Simplex 5m DIN-DIN Singlemode Simplex 10m

E2000 to E2000 Simplex

For other connector styles, APC Finish and pigtails Please contact! DIN to FC Simplex

SC to LC Duplex

F AX : (051) 2855227

E2000 to E2000 Duplex

W EB :

WWW . NEXTERA . COM . PK

E MAIL :

DIN to DIN Simplex

INFO @ NEXTERA . COM . PK

101

Successful Connections only Fiber optics is a precise science, a technology that demands the most from each individual component. Since the birth of fiber optics, DIAMOND has been an important contributor of innovative ideas and solutions that have extended the bounds of this exciting field. F-3000™

F-2000™

E-2000-PS™

FC

DIN

F-3000™

F-2000™

F-2000-PS™

SC

FC

DIN

Fiber optic connectors of the SFF (Small Form Factor! family, complying with IEC61 754-20 and TlA/EIA 604-10, LC ILucent) compatible with integrated security and handling characteristics. For singlemode and multimode applications, PC and APC polished.

Fiber optic connectors complying with CECC 86275, integrated high security and handling characteristics. For singlemode and multimode applications APC and PC polished.

Fiber optic connector complying with CECC 8627 5 with integrated expanded beam technology, allowing high power light transmission up to 2W. A section of graded index fiber is introduced as a collimating lens, which enlarges the beam diameter and reduces power density at the connector interface.

Fiber optic connectors complying with the NTT-SC Standard and CECC 86265 for singlemode and multimode applications, APC and PC polished

Fiber optic connectors complying with the NTT-FC Standard. CECC 86115 and IEC 874-7 for singlemode and multimode applications, PC and APC polished.

Fiber optic connectors complying with CECC 86135, CECC 861 SO, IEC 874-6 and CECC 78005 for singlemode and muhimode applications, PC and APC polished-

Available as: ®Connector (simplex) ®Standard and JDS version.

Available as: ®Connector ISA (simplex) ®Integrated electrical/ optical backplane connector (LSD) ®Connector (LSG) (Push-Pull) ®AVIO/AVIM (Avionics/Military)

Available as: ® Connector (simplex) ® Duplex ® Backplane Applications: CATV LAN, Telecommunications, Test and Measurement, Sensors, Industria

Available as: ®Connector (simplex) K Duplex Compact ®Duplex 1/2" ®Low Profile ^ Backplane ®Fusion ®Crimp & Cleave for HCS fibers Applications: Telecommunications, CATV, LAN MAN, WAN, Test and Measurement, Medical, Sensors, Industrial.

Available as: ®APC (4°) ®Connector (simplex) ®Duplex Compact ® Backplane Applications: Telecommunications Networks, high bit rates and long transmission distances. DWDM Systems, Amplifier technology

Available as: ®Connector (simplex) ®Duplex ®Duplex by FCS Applications: Telecommunications, CATV, LAN, MAN, WAN, Test and Measurement, Medical, Sensors, industrial

Applications: Telecommunications CATV, LAN, MAN, WAN, Test and Measurement, Medical, Sensors, Industrial

Applications: Telecommunications, CATV, LAN, MAN, WAN, Test and Measurement, Medical, Sensors, Industrial

with DIAMOND SA In public and private telecommunications networks alike, DIAMOND connectors have proven them selves with years of reliable service. This is because rigorous quality controls have always formed the basis of our manufacturing process. But DIAMOND is more than just a connector manufacturer. We unterstand that excellent products must be backed by commensurate support. Our specialists are there to help with expert advice, training, installation assistance and termination services. ST™

FSMA

MT-PJ

PM

MFS

St™

FSMA

PM

DHI

MT-PJ

MFS

ST-compatible fiber optic connectors (BFOC/2,5) complying with CECC 86120 and IEC-874-10 for single-mode and multimode applications, PC polished.

Fiber optic connectors complying with CECC 86104 and MIL-C83522Type9Q5tor multimode applications, flat polished.

PM (polarization maintaining) fiber optic connectors. For usage with PM fiber (Panda, Bow-tie). APC and PC polished. Actively or passively aligned.

Diamond Micro Interface is a setup of two 2,5 mm ferrules mated with the help of a special clip, aiming to maintain the smallest possible dimension. For singlemode and multimode applications APC and PC polished.

Fiber optic connectors with mini MT-terrules, Complying with ANSI/TIA/EIA-604-12 ANSI/TIA/EIA-568-B.3. Plug and Pull Design with well known RJ-style latch. For singlemode and multimode applications, PC polished

Multi fiber connector system for SM and MM ribbon fiber, complies with pr EN 185310. APC and PC polished

Available as: Ferrules (simplex)

Available as: Connector (duplex)

Applications: Industrial, Test and Measurement

Applications: LAN (FTT-XI, 10-100Mb Ethernet up to Gigabit solutions

Applications: Telecommunications CATV, LAN, MAN. WAN. Test and Measurement, Medical, Sensors. Industrial

Available as: ®Connector (simplex) Applications: Telecommunications CATV LAN, MAN, WAN, Test and Measurement, Medical, Sensors, Industrial ST is a registred trademark of AT&T

Available as: Connector (simplex with 03.175 mm ferrulel Also available as: Connector (with 02.5 mmferrulel, for singlemode and multimode applications, PC flat polished Applications: Telecommunications, LAN, Medical, Sensors, Industrial

Available as: ®Connector E-2000 (simplex) ®Connector DIN (simplex) ®Connector FC/PC (simplex) ®Connector SC (simplex) Applications: Test and Measurement, Medical, Sensors, Industria

Available as: Connector Backplane

OPTICAL FIBER NETWORK

CONNECTORS

S E RV I C E S

SC CONNECTORS FEATURES . Compliance with Telcordia. ANSI. IEC. TIA/EIA. NTT and JIS specifications . Low insertion loss & back reflection . One-piece construction & pullproof design . Free-floating ceramic ferrule . Precision anti-rotation key and corrosion resistant body . UL-rated plastic housing and boots in a variety of colors . Telcordia style boots . Mount style Adapters with plastic housing

APPLICATIONS . . . . . . . . . .

CATV Metro Active device termination Test equipment Telecommunication networks Local Area Networks (LANs) Data processing networks Structured Cabling Wide Area Networks (WANs) Industrial, medical & military

NEXTERA provides a variety of Subscription Channel (SC) connectors and adapters. The SC is known for its locking mechanism that gives an audible click when pushed into the adapter. Available in simplex and duplex styles, SC connector features a push-pull design for quick patching of cables into rack or wall mounts and prevents rotational misalignment. The SC connector family includes the Physical Contact (PC) pre-dome polished ferrule end face that reduces back reflection over a ferrule with a flat end face. To further reduce the unwanted back reflection NEXTERA offers the Angled Physical Contact (APC) version that has a ferrule end face with an 8° angle. The NEXTERA SC connectors are available in both singlemode and multimode versions with zirconia ceramic ferrules, and is fully compatible with NTT-SC hardware. The precision molded body and boot are made from UL-rated material. NEXTERA also offers an epoxy-free SC connector for quick field termination.

Part #

Description

Style

Typical Loss

Manufacturer/Supplier

NC-SCPC-SM/S NC-SCPC-MM/S NC-SCAPC-SM/S NC-SCAPC-MM/S

SC/PC, Singlemode SC/PC, Multimode SC/APC, Singlemode SC/APC, Multimode

Simplex Simplex Simplex Simplex

0.10dB 0.20dB 0.10dB 0.20dB

NEXTERA NEXTERA NEXTERA NEXTERA

Note: NEXTERA offers SC connector in once piece construction style with 3mm cable standard boot. Please contact us for other specifications requirement.

ST CONNECTORS FEATURES . Bayonet style housing for easy termination . Epoxy and epoxy-less versions . High precision alignment . Low insertion and return loss and back reflection

APPLICATIONS . . . .

Local Area Networks (LANs) Data Processing Networks Premise Installations Instrumentation

The NEXTERA ST style connector has a bayonet-style housing and a long spring-loaded ferrule hold the fiber. Available in singlemode and multimode, the ST style connector features reliable and durable field installation. The design of the NEXTERA ST connector enables installers to crimp the back of the body directly onto the cable jacket and Kevlar®. This eliminates cable pull away, ensuring a strong termination. The ST is one of the older generations of connector, but is still widely used for multimode networks, including LANs for buildings and campuses.

Part #

Description

Style

Typical Loss

Manufacturer/Supplier

NC-STPC-MM ST/PC, Multimode Simplex 0.15dB NEXTERA NC-STPC-SM ST/PC, Singlemode Simplex 0.20dB NEXTERA Note: NEXTERA offers ST connectors in once piece construction style with 3mm cable standard boot. Please contact us for other specifications requirement.

A next generation media converter with enhanced features NXF-742 10/100Base-TX to 100Base-FX Media Converter

101

FOR

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

See Page # 111 PHONE: (051) 2855224-5

OPTICAL FIBER

CONNECTORS

NETWORK

S E RV I C E S

FC CONNECTORS FEATURES . Compliance with Telcordia, ANSI, IEC,TIA/EIA, NTT and JIS specifications* . Low insertion loss & back reflection . One-piece construction . ceramic ferrule . Precision anti-rotation key . Telcordia style boots . Corrosion resistant body (Nickel Plated Brass)

APPLICATIONS . . . . . . . .

CATV Metro Applications Active device termination Test equipment Wide Area Networks (WANs) Telecommunication networks Data processing networks Industrial and Military

The FC/PC connector incorporates a Physical Contact (PC) pre-domed fiber end face that reduces back reflection over a flat end face ferrule. To further reduce unwanted back reflection NEXTERA offers the FC/APC connectors and adapters. The NEXTERA FC connector is available in both singlemode and multimode versions, and is fully inter-mateable with NTT-FC products. Both versions have zirconia ceramic ferrules with pre-radiused PC profile and convex spherical end, or the 8° angle in a step or conical end face for the APC version. All NEXTERA FC connectors can achieve low optical loss and back reflection while ensuring maximum repeatability.

Part #

Description

Style

Typical Loss

Manufacturer/Supplier

NC-FCPC-SM NC-FCAPC-SM SI-FCPC-SM SI-FCAPC-SM

SC/PC, Singlemode SC/APC, Singlemode SC/PC, Singlemode SC/APC, Singlemode

Simplex Simplex Simplex Simplex

0.20dB 0.20dB 0.25dB 0.25dB

NEXTERA NEXTERA Seiko, Japan Seiko, Japan

Note: NEXTERA offers FC connectors in once piece construction style with 3mm cable standard boot. Please contact us for other specifications requitement.

DIN CONNECTORS FEATURES . CATV & multimedia . Metro applications, premise installations . Active device termination . Test equipment . Telecommunication networks . Local & Wide Area Networks (LANs. WANs) . Data processing networks . Industrial, medical & military

APPLICATIONS . Compatible with DIN 47256 . Spring- loaded free floating ferrule piece construction . Free-floating ceramic ferrule design . Corrosion resistant body . Compact design . Low insertion loss & back reflection

DIAMOND SA, pre-assembled DIN 47256 (LSA) connectors feature a single unit body with spring-loaded free floating zirconia ferrule. This unique connector offers superior performance in a compact, DIN 47256 compatible design suitable for a variety of applications. The DIN connectors are manufactured of precision screw machined brass for consistent performance and durability. Field Terminations are not recommended, Diamond SA will provide pre-terminated pigtails and patchcords.

Part #

Description

Style

Typical Loss

Manufacturer/Supplier

NC-DINPC-SM DINPC, Singlemode Simplex 0.20dB NEXTERA NC-DINAPC-SM DIN/APC, Singlemode Simplex 0.20dB NEXTERA Note: For high performance results, Diamond SA does not recommend field terminations and will provide factory assembled pigtails and patchcords.

Maximise your Gigabit Ethernet LAN by going full-duplex with fiber! NXF-724 See Page # 111

1000Base-T to 1000Base-SX/LX Converter F AX : (051) 2855227

W EB :

WWW . NEXTERA . COM . PK

E MAIL :

INFO @ NEXTERA . COM . PK

101

OPTICAL FIBER NETWORK

CONNECTORS

S E RV I C E S

LC Connector FEATURES . Compact, pull-proof design . RJ-45 style interface . Low insertion loss and low back reflection* . Polarized and color coded (TIA 568-A&IS011801) . UL-Rated plastic housing and boot . Behind the Wall (BTW) style short connector & boot . High precision alignment

APPLICATIONS . . . . . . . .

Gigabit Ethernet Video Active Device Termination Premise Installations Telecommunication Networks Multimedia Industrial Military

The LC is a small form factor (SFF) connector and is ideal for high density applications, available in simplex or duplex versions. The LC connector has a zirconia ceramic ferrule measuring 1.25mm O.D. with either a PC or APC endface, and provides optimum insertion and return loss. The LC connector is used on small diameter mini-cordage (1.6mm/2.0mm) as well as 3.0mm cable. LC Connectors are available in pre-assembled or kit (unassembled) formats. The NEXTERA LC Adapters are available in simplex and duplex configurations and fit the standard RJ-45 panel cutout. They feature self-adjusting panel latches and a choice of mounting orientations with labeled polarity. A choice of zirconia ceramic or phosphor bronze split sleeve is available. The LC connector family is Telcordia, ANSI/EIA/TIA and IEC compliant.

Part #

Description

Style

Typical Loss

Manufacturer/Supplier

NC-LCS-SM NC-LCS-MM NC-LCD-SM NC-LCD-MM

Singlemode with 3MM Cable Boots Multimode with 3MM Cable Boots Singlemode with 3MM Cable Boots Multimode with 3MM Cable Boots

Simplex, Simplex, Duplex Duplex

0.10dB 0.20dB 0.10dB 0.20dB

NEXTERA NEXTERA NEXTERA NEXTERA

MT-RJ CONNECTOR SERIES APPLICATIONS

FEATURES . Precision molded MT ferrule . High precision guide pins for exact alignment . Duplex ferrule . Plug-jack (RJ-45) design . TIA/EIA 568-A compliant* . Polishing does not require diamond film

. Asynchronous Transmission Mode (ATM) . Gigabit Ethernet . CATV. Video and Multimedia . Active Device/Transceiver Interface . Premise Installations . Telecommunication Networks . Industrial . Military . Parallel optical interconnect between PC Cards and patch panels . Interconnection for 0/E modules . Optical Switch interframe connections

The singlemode or multimode MT-RJ products available from NEXTERA are well suited for high density applications. The MTRJ connector provides increased port density two times that of a duplex SC. The single plastic ferrule houses two fibers utilizing a user-friendly RJ-45 connection system. The same size as a simplex SC connector, the MTRJ is designed for backbone and horizontal cabling systems, local area networks and telecommunication systems, as it is reliable and simple to terminate. The MT-RJ Adapter comes standard in black, with additional colors available upon request. An optional MT-RJ Adapter with SC style housing is also available for applications where SC footprint is required.

Part #

Description

NC-MTRJF-MM NC-MTRJF-SM NC-MTRJM-MM NC-MTRJM-SM

Female, Multimode Female, Singlemode Male, Multimode Male, Singlemode

Style

Typical Loss

Manufacturer/Supplier

0.20dB 0.20dB 0.20dB 0.20dB

NEXTERA NEXTERA NEXTERA NEXTERA

Highly reliable 19" rack-mount 12 port card Basis media converters chassis for backbone and mission critical applications NXF-719 19" Rack-mounted 12-port Card-based Media Converter Chassis

101

FOR

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

See Page # 111

PHONE: (051) 2855224-5

Experience the Power of

E-2000 Connector System!

Safety Shutter

0.1dB Random

Color Coding

AMP NETCONNECT LightCrimp Plus Connectors

• Easiest and quickest fiber termination available • Terminations take under a minute • Limited training required • No polishing needed:simply strip the cable,cleave and crimp • Factory-polished to a consistent, high-quality end finish —eliminates return loss concerns • No epoxy,curing ovens,or ultraviolet; no power needed • SC-and ST-Style connectors • No set-up required,ideal for low fiber count cables -no workstation required • Lowest applied labor costs • Exceeds connector performance requirements of TIA/EIA-568-B • Tool kit upgrades available

Fiber optic connections in less than a minute With the AMP NETCONNECT LightCrimp Plus connectors, you can make fiber optic connections for premises cabling fiber-to-the-desk applications in less than a minute. LightCrimp Plus connectors use patented AMP splice and crimp technology to make fiber optic termination a quick, clean and simple mechanical process. Limited training is required, combined with a reduced number of tools and no consumables. With LightCrimp Plus you can terminate fibers without the “epoxies,” ovens or ultraviolet curing processes used in conventional terminations. Rely on AMP to provide you the highest-quality fiber connections, no matter what your preference or requirement – be it quick-cure adhesive style; no-epoxy polish (LightCrimp); or no-epoxy, no-polish (LightCrimp Plus).

LightCrimp Plus ST-Style and SC/MT-RJ Jack Termination Kit 1278118-1

OPTICAL FIBER

EPOXYLESS CONNECTORS

NETWORK

S E RV I C E S

Since AMP NETCONNECT LightCrimp Plus connectors are factory polished, all you have to do is strip the cable, cleave the fiber and crimp the connector. As well as saving time per connector, there is no set-up time required – and you get a more consistent, high-quality end finish.

Pre-polished connectors

LightCrimp Plus connectors are rugged LightCrimp Plus connectors offer consistent crimp quality and long term high performance

on a par with that of standard epoxy style connectors, regardless of temperature variations. LightCrimp Plus meets the relevant TIA/EIA, IEC, CECC and EN optical and mechanical specifications and operates in temperatures ranging from -10°C to +60°C.

Tool kit upgrades

The crimp tooling for LightCrimp Plus can also be used to crimp LightCrimp connectors. For existing users of LightCrimp or pre-polished connectors, AMP offers tool kit upgrades to make the transition to LightCrimp Plus terminations easier and more cost-effective.

Performance characteristics

The LightCrimp Plus has been tested per industry FOTPs and exceeds all the requirements in the draft Connector Performance Specification Annex for the next release of TIA/EIA-568-B. Ferrule Type Ceramic

Insertion Loss - typical (dB) 0.3

Temperature Range -10°C to +60°C

LightCrimp Plus Connectors Description

Part Number

ST-Style multimode connector - ceramic ferrule suitable for 62.5/125µm fibe ST-Style multimode connector - ceramic ferrule suitable for 50/125µm fiber SC Simplex multimode connector - ceramic ferrule suitable for 62.5/125µm fiber SC Simplex multimode connector - ceramic ferrule suitable for 50/125µm fiber SC Duplex multimode connector - ceramic ferrule suitable for 62.5/125µm fiber SC Duplex multimode connector - ceramic ferrule suitable for 50/125µm fiber

492642-1r 1278082-1 492643-1 1278079-1 1278009-1 1278080-1

LightCrimp Plus Termination Kits Description ST-Style connector termination kit includes crimp tool, ST-Style die set, all-in-one stripper tool, Kevlar shears, cable holder and cleave tool. SC connector termination kit includes crimp tool, SC die set, all-in-one stripper tool, Kevlar shears, cable holder and cleave tool. LightCrimp Plus ST-Style and SC/MT-RJ jack termination kit includes premium carrying case, crimp tool, ST-Style and SC die sets, all-in-one stripper tool, Kevlar shears, ST-Style and SC cable holder and cleave tool. Deluxe premise termination kit, MT-RJ Jack/LightCrimp Plus/LightCrimp includes premium carrying case, crimp tool, ST-Style and SC die sets, all-in-one stripper tool, Micro-stripper, Kevlar shears, ST-Style and SC cable holders, polishing plates/pads/pucks/films, strip templates, and actuator key.

Part Number 492697-1 1278022-1 1278118-1

1278949-1

LightCrimp Plus Upgrade and Replacement Tools Description

Part Number 1278540-1 492623-1 492782-1 492622-1 492783-1 492674-1 492703-1

Premium softcase Crimper w/die-set, ST-Style Crimper w/die-set, SC-Style Die-set only, ST-Style Die-set only, SC-Style Cleaver, ST-& SC-Style Cable holder/template, ST-Style

F AX : (051) 2855227

W EB :

Description Cable holder/template, SC-Style Jacket/buffer/coating stripper Micro-stripper Kevlar shears Pocket microscope Cleave tool replacement blade

WWW . NEXTERA . COM . PK

E MAIL :

Part Number 1278023-1 1278947-1 492109-2 1278637-1 1278132-1 1278219

INFO @ NEXTERA . COM . PK

101

NETWORK

OPTICAL FIBER ADAPTERS

S E RV I C E S

Part #

Type

Style

Housing

Sleeve

Manufacturer/Supplier

MATING ADAPTERS SC Connectors NC-SC-MM NC-SC-SM NC-SCD-MM NC-SCD-SM NC-SC-APC ST Connectors NC-ST-MM NC-ST-SM NC-ST-MM NC-STD-SM NC-SCD-MM NC-SCD-SM FC Connectors NC-FC4-MM NC-FC4-SM NC-FC2-MM NC-FC2-SM DIN Connectors NC-DIN-SM E2000 Adapters NC-FC4-MMPC-15 NC-FC2-SMPC-15 NC-FC2-SMPC-10 NC-FC2-SMAPC-10 MT-RJ Adapters NC-MTRJ-MM NC-MTRJ/SC-MM LC Adapters NC-LCD-MM NC-LCD-SM

SC

ST

FC

Simplex MM Simplex SM/MM Duplex MM Duplex SM/MM Simplex SM

3 3 3 3

Plastic Plastic Plastic Plastic 3 Plastic

Phos. Bronze Zirconia Phos. Bronze Zirconia Zirconia

NEXTERA NEXTERA NEXTERA NEXTERA NEXTERA

Simplex MM Simplex SM/MM Simplex MM Simplex SM/MM Duplex MM Duplex SM

2 2 3 3 3 3

Metal Metal Plastic Plastic Plastic Plastic

Phos. Bronze Zirconia Phos. Bronze Zirconia Phos. Bronze Zirconia

NEXTERA NEXTERA NEXTERA NEXTERA NEXTERA NEXTERA

Simplex MM Simplex SM/MM Simplex MM Simplex SM/MM

4 4 2 2

Metal Metal Metal Metal

Phos. Bronze Zirconia Phos. Bronze Zirconia

NEXTERA NEXTERA NEXTERA NEXTERA

Simplex Singlmode

2

Metal

Zirconia

NEXTERA

Simplex MM Simplex SM Simplex SM with 0.1dB Loss Simplex SM with 0.1dB Loss

3 3 3 3

Plastic Plastic Plastic Plastic

Zirconia Zirconia Zirconia Zirconia

Diamond SA Diamond SA Diamond SA Diamond SA

Multimode Multimode w/SC footprint

3 3

Plastic Plastic

Polymer Polymer

NEXTERA NEXTERA

Duplex MM

3

Plastic 3 Plastic

Phos. Bronze Zirconia

NEXTERA NEXTERA

Style 1 - Floating

Duplex SM

Style 2 - Threaded

Style 3 - Flanged

Style 4 - Square Flanged

HYBRID ADAPTERS FC/PC to SC Female Adapter NC-FC/SC-FEMM FC to SC (Simplex) MM NC-FC/SC-FESM FC to SC (Simplex) SM SC to ST Female Adapter NC-SC/ST-FEMM SC to ST (Simplex) MM NC-SC/ST-FESM SC to ST (Simplex) SM NC-SC/ST-DFEMM SC to ST (Duplex) MM NC-SC/ST-DFESM SC to ST (Duplex) SM FC to ST Female Adapter NC-FC/ST-FEMM FC to ST (Simplex) MM NC-FC/ST-FESM FC to ST (Simplex) SM FC/PC to DIN DS-FC/DIN-FESM FC to DIN (Simplex) SM

DIN

E-2000 ST to FC

ST to SC

ST to SC Duplex

FC/PC TO SC

3 3

Plastic Plastic

Phos. Bronze Zirconia

NEXTERA NEXTERA

3 3 3 3

Plastic Plastic Plastic Plastic

Phos. Bronze Zirconia Phos. Bronze Zirconia

NEXTERA NEXTERA NEXTERA NEXTERA

3 3

Plastic Plastic

Phos. Bronze Zirconia

NEXTERA NEXTERA

1/2

Metal

Zirconia

Diamond SA

For other adapter type/style requirement please contact ! Hybrid

101

FOR

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

PHONE: (051) 2855224-5

OPTICAL FIBER

ATTENUATORS

NETWORK

S E RV I C E S

Reduce the strength of high power optical signal with our attenuators When fiber devices are very close to each other, the signal is extremely strong and doesn't have time to attenuate or lose strength as it travels through fiber. This is called receive saturation. The fiber signal's energy level exceeds the operating range of the receiving equipment. So when the light reaches the other end, it reflects back along the cable. This distorts the signals and disrupts data. you can solve this problem with our wide range of wavelength independent attenuator, suitable for 1310 and 1550 nm. These attenuator are available in FC/PC, DIN, SC , ST LC and E2000 connector styles and in both bulkhead and in-line type. Plug-in type attenuator can be used in most applications as there small size makes them ideal for in-line use. While at the same time, their low return losses, make them ideal for both system and lab use. Bulkhead type attenuator are designed for patch panels, test equipment and lab use. In which they can be used to balance line power or to prevent detector over driving.

FC/PC Bulkhead

Bulkhead Attenuators Part #

Description

FC/PC Bulkhead Attenuators NC-FC13A-5 NC-FC13A-10 NC-FC13A-15 NC-FC13A-20 NC-FC15A-5 NC-FC15A-10 NC-FC15A-15 NC-FC15A-20 SC/PC Bulkhead Attenuators NC-SC13A-5 NC-SC13A-10 NC-SC13A-15 NC-SC13A-20 NC-SC15A-5 NC-SC15A-10 NC-SC15A-15 NC-SC15A-20

5dB FC Attenuator for 1310nm 10dB FC Attenuator for 1310nm 15dB FC Attenuator for 1310nm 20dB FC Attenuator for 1310nm 5dB FC Attenuator for 1550nm 10dB FC Attenuator for 1550nm 15dB FC Attenuator for 1550nm 20dB FC Attenuator for 1550nm

SC Bulkhead

5dB FC Attenuator for 1310nm 10dB FC Attenuator for 1310nm 15dB FC Attenuator for 1310nm 20dB FC Attenuator for 1310nm 5dB FC Attenuator for 1550nm 10dB FC Attenuator for 1550nm 15dB FC Attenuator for 1550nm 20dB FC Attenuator for 1550nm

ST Bulkhead

Plug-In Attenuators Part #

Description

FC/PC Plug-In Attenuators NC-FC1315A-5 NC-FC1315A-10 NC-FC1315A-15 NC-FC1315A-20 DIN Plug-In Attenuators NC-DIN1315A-5 NC-DIN1315A-10 NC-DIN1315A-15 NC-DIN1315A-20 LC Plug-In Attenuators NC-LC1315A-5 NC-LC1315A-10 NC-LC1315A-15 NC-LC1315A-20 SC Plug-In Attenuators NC-SC1315A-5 NC-SC1315A-10 NC-SC1315A-15 NC-SC1315A-20

5dB FC Attenuator for 1310/1550nm 10dB FC Attenuator for 1310/1550nm 15dB FC Attenuator for 1310/1550nm 20dB FC Attenuator for 1310/1550nm

FC/PC Plug-In

5dB DIN Attenuator for 1310/1550nm 10dB DIN Attenuator for 1310/1550nm 15dB DIN Attenuator for 1310/1550nm 20dB DIN Attenuator for 1310/1550nm 5dB LC Attenuator for 1310/1550nm 10dB LC Attenuator for 1310/1550nm 15dB LC Attenuator for 1310/1550nm 20dB LC Attenuator for 1310/1550nm

SC Plug-In

5dB SC Attenuator for 1310/1550nm 10dB SC Attenuator for 1310/1550nm 15dB SC Attenuator for 1310/1550nm 20dB SC Attenuator for 1310/1550nm

For other types of attenuators and attenuation values Please contact NEXTERA

F AX : (051) 2855227

W EB :

WWW . NEXTERA . COM . PK

LC Plug-In

E MAIL :

INFO @ NEXTERA . COM . PK

101

NETWORK

OPTICAL FIBER TOOLS KITS

S E RV I C E S

Innovative and easy optical fiber tool kits for every application

NEXTERA introduces a new line of fiber optic tool kits from Fiber Instruments Sales, USA. FIS has been the leader in the fiber optic industry for offering the best value on tool kits. Technicians will appreciate FIS Basic Tool Kit such as the fiber optic disposal unit, safety glasses, labeler and round cable cutter just to name a few. The Universal Epoxy Termination Tool Kit provides a technician materials to prep and connectorize standard fiber optic connectors such as ST, SC and FC. The Small Form Factor (SFF) Tool Kit allows termination of both LC and MU style connectors. Quick restoration requires mechanical splice kits and FIS offers kits specific to installing Fibrlok, Ultrasplice and Camsplice mechanical splices. For technicians searching for the ultimate tool kit, review our new Universal Multimode Test Set Kit and Contractors Kit including FIS test equipment for network performance testing.

Part #

Description

NC-0053 NC-0053-FI NC-0053-US NC-0053HM NC-0053LM NC-0053U NC-0053UNC NC-0053UO NC-0053UNT

Basic Tool Kit FIBRLOK Splice Restoration Kit UltraSplice Restoration Kit Hot Melt Tool Kit w/6 Port Oven SFF Universal Epoxy Tool Kit (LC, MU) Universal Epoxy Tool Kit (ST, SC, FC) UNICAM Installation Kit (ST, FC, SC, LC, MTRJ) Universal Epoxy Tool Kit(ST,SC, FC) w/ 24 Port Heat Oven UNICAM Installation Kit w/CTS

101

NC-0053 Basic Tool Kit

NC-0053-FI

NC-0053UNC

NC-0053U

FIBRLOK Splice Restoration Kit

UNICAM Installation Kit (ST, FC, SC, LC, MTRJ)

Universal Epoxy Tool Kit (ST, SC, FC)

FOR

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

PHONE: (051) 2855224-5

OPTICAL FIBER TOOLS

NETWORK

S E RV I C E S

Heavy Duty Cable Sheath Cutter NEXTERA offers world most excellent heavy duty cable sheath cutter for the optical fiber cable installers. HDCSC-1 removes not only cable outer jackets with precision and ease of use, but also cuts single/double steel tape armoring of any type. HDCSC cuts both way (longitudinally and around the cable). Blade height and direction is adjustable. Tool comes with one spare blade as standard.

Part # NC-HCSC-1 NC-HCSC-1

Description Heavy Duty Cable Sheath Cutter Advanced Highly precise Heavy Duty Cable Sheath Cutter

Armored Cable Slitter Tool slits outer Polyethylene jacket and armor in one operation, Performs longitudinal slitting and circumferential (ringing) for end stripping. Blade Rotates 90¼ by activating blade lever, allowing easy midspan preparation (ringing & splitting) Replacement Blades Available.

Part #

Description

NC-CSA NC-RP5-CSA

Armored cable slitter adjustable from 8-286mm cable O.D. Replacement Blade (package of 5)

Utility Cable Cutter Utility cable cutter for up to 70mm cable. This Manual tool is great for standard power, coaxial, and non armored cables. Ratcheting Cutter Great for aluminum armor, not intended for ACSR.

Part #

Description

NC-UCC-PK1

Miller Cable Slitter The Miller cable slitters are manually operated cutting devices designed for fast, safe and precise jacket removal of PE, PVC and rubber jacket. The F1-114 is designed to strip cables from 4.5mm to 29mm Dia. The F1-158 is designed to strip cables from 19mm to 40mm Dia.

Part #

Description

NC-CS114 NC-CS158 NC-RB-CS

Cable Slitter (4.5mm to 29mm diameter) Cable Slitter (19mm to 40mm diameter) (not pictured) 1 Replacement Blade

Round Cable Slitter NEXTERA Fiber optic multifiber cable requires a precision tool that is capable of cutting into the protective outer jacket. The Round Cable Slitter is capable of handling cable diameters up to 1.5 inches. An adjustable blade cuts jacket thickness up to .187 inches.

Part #

Description

NC-FIRCS NC-FIRB

Round Cable Slitter Replacement Blade

F AX : (051) 2855227

W EB :

WWW . NEXTERA . COM . PK

E MAIL :

INFO @ NEXTERA . COM . PK

101

NETWORK

OPTICAL FIBER TOOLS

S E RV I C E S

Kevlar Cutters NEXTERA offers variety of reliable Kevlar cutters. The non-slip serrated Kevlar(r) Cutter provides high leverage, quick action spring carbon steel shear cuts with ease. The Miller Kevlar Cutter with durable serrated cutting shears and cushion handles is also available. The Ceramic Kevlar Cutter easily trims tough Kevlar in fiber optic cables with a fast, clean cut and lasts up to 50 times longer than stainless blades.

Part #

Description

NC-FOKC-CS NC-FOKC-SB NC-FOKC-CB

Economy Kevlar Cutters (Carbon steel blade) Miller Kevlar Cutters (Steel Blade) Ceramic Kevlar Cutters (Ceramic Blade)

Fiber Scribe This new generation of Fiber Scribe from NEXTERA is made of carbide and designed for scratching and scribing optical fibers.

Part #

Description

NC-FS-C01

Jacket Stripper Cut and strip jackets from simplex fiber cable with this precision jacket stripper. The dual "V" notch blade allows the quick removal of jacket to Kevlar(r) strength member. Plier nose, along with cushion grips and spring release are additional features making this stripper comparable to the Ideal T-Type(r) Stripper.

Part #

Description

NC-JS01

Jacket Stripper

Buffer Tube Strippers Buffer Tube Strippers with adjustable blades can be set for any depth to help assure nick-free jacket entry from simplex fiber to specifications on a variety of fiber optic cable up to 1/8 inch diameter. Loose tube fiber demands a precision tool capable of cutting different buffer tube diameters without nicking the enclosed fiber. Available is the blue buffer tube stripper for coaxial cable from 1/8 inch to 7/32 inch.

Part #

Description

NC-BTS-G

Grey Buffer Tube Stripper (For Fiber Applications)

Utility Knife This Utility knife features carbon 0.5mm thick steel blades and compact plastic housing. and best suitable for fiber industry job.

Part #

Description

NC-UK5MM

101

FOR

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

PHONE: (051) 2855224-5

OPTICAL FIBER

FIBER STRIPPERS & CLEAVERS

NETWORK

S E RV I C E S

Cleavers Rugged and Reliable, The Fitel S310 and S315 Single Fiber Field Cleavers are designed for cleaving singlemode and multimode fiber to desired lengths. The ceramic blade performs 6000 plus cleaves, performing 90% of cleaves within less than 1O. Suitable for mechanical splicing with 99% cleaves within less than 2O. The S310 and S315 Field Cleavers can accommodate 0.25mm and 0.9mm coating diameters and their small lightweight size makes them the perfect addition to any field splicing system. The S310 is specifically designed to cleave fiber in the field accurately to a 16mm length. The S315 has a graduated scale, which allows for cleave lengths of 5 to 20mm. Easy to use and preferred by many installers. Shipped in a protective carrying case

Part #

Description

NC-CL-310 NC-CL-315

For cleaving to 16mm length For cleaving 5 to 20mm length adjusting with scale

Sumitomo Stripper The JR-22 easily strips coating from 250um and 900um buffered fiber. The design concept and feel of precision has made it the favorite of any fiber optic tehncician. Easy to replacable blades are als available.

Part #

Description

NC-JR22

250um and 900um fiber stripper

No-Nik Stripper In a single short stroke, the red handle removes 900µm buffer tube and the 250µm or 500µm fiber coating on tight buffer cable. The blue handle removes 250µm coating from loose tube.

Part #

Description

NC-NNS-25 NC-NNS-2590

250um No-Nik Fiber Stripper (Blue) 250 or 500 or 900um No-Nik Fiber Stripper (Red)

Miller Stripper The Miller Stripper is an exceptional tool recommended for stripping 250µm coated loose tube fiber and 900µm buffer tube. The Miller Stripper has a .0055Ó (0.14mm) laser drilled hole, soft plastic-cushioned handle grip, and super accurate hardened stripping jaws, insuring smooth clean stripping action.

Part #

Description

NC-MS-1224

250um and 900um Miller Fiber Stripper

Fitel Fiber Stripper The Fitel S210 Fiber stripper is a stripping tools for single fibter of 250um and 900um coating diameters. It provides easy, fast and low cost stripping for preparing single fiber fusion splice.

Part #

Description

NC-FS-S210

F AX : (051) 2855227

W EB :

WWW . NEXTERA . COM . PK

E MAIL :

INFO @ NEXTERA . COM . PK

101

OPTICAL FIBER NETWORK

POLISHING ITEMS

S E RV I C E S

Polishing Discs Hand polishing fiber optic connectors require a precision tool, capable of preparing thousands of connectors. . All NEXTERA polish discs have grooved faces adding efficiency and ease to the polishing process. These NEXTERA polishing discs are made of stainless steel and contain an internal sleeve to guide and secure the ferrule during polishing. Polish Disc are available in FC, ST, SC, MT-RJ and LC connectors styles.

Part #

Description

NC-STPD-01 NC-STPD-04 NC-FCPD-01 NC-SCPD-01 NC-MTRJPD-01 NC-LCPD-01

ST Polish Disc 4 Position ST Polishing Disc FC/PC Polish Disc SC Polish Disc MT-RJ Polish Disc LC Polish Disc

NEXTERA Polishing Kit Now available from NEXTERA is a handy polishing kit. Included in a compact rugged case are all the tools needed to complete your hand polishing requirements. This kit offers excellent value since the cost of the kit is much less than if all components were purchased separately. Contents: (1) ST Polish Disc. (1) SC Polish Disc, (1) FC Polish Disc, (1) SMA Polish Disc, (6) Optic Preps, (1) Soft Polish Pad, (6) Sheets 1um Polish Films 5" x 5", (6) Sheets 5um Polish Film 5"x5", (6) Sheets of .3um Polish Film 5"x5".

Part #

Description

NC-FPK-1S

Polishing Kit

Polishing Films For and optimum connector polish, NEXTERA recommends a three stage polish ultizing 5um, 1um, and .3um lapping film. A choice of either 9"x6.5" or 9"x13" size may be used in polishing process. During the three step process the 5um and 1um. 9"x13" Sheet will typically yield up to 20 connectors with the .3um typically yielding 10 connectors.

Part #

Description

Large Sheet Polishing Film NC-LSPF-913-03 0.3um, Alum. Oxide, 9" x 13" (Pack of 25) NC-LSPF-913-10 1um, Alum. Oxide, 9" x 13" (Pack of 25) NC-LSPF-913-50 5um, Silicon Carbide, 9" x 13"(Pack of 25) Standard Sheet Polishing Film NC-SSPF-913-03 0.3um, Alum. Oxide, 9" x 6.5" (Pack of 25) NC-SSPF-913-10 1um, Alum. Oxide, 9" x 6.5" (Pack of 25) NC-SSPF-913-50 5um, Silicon Carbide, 9" x 6.5" (Pack of 25)

Polishing Plates, Pads and Mats The polishing of fiber optic connectors calls for both a hard flat surface and a cushioned pad. The 9"x13" or 6"x9" polish plate is available in Safety Glass and mounted on four rubber feet or supports. When polishing PC Style pre-radius connector use the soft polish pad on the glass plate. Placing the lapping film over the pad assures the removal of epoxy and proper of fiber without destroying the pre-radius ferrule.

101

FOR

Part #

Description

NC-PP-913 NC-PP-69 NC-PPM-55 NC-PPM-2214

Polish Glass Plate (9”x13") Polish Glass Plate (6"x9") Soft Polish Pad (5"x5") Large Black Work mat (22"14")

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

PHONE: (051) 2855224-5

OPTICAL FIBER

CONSUMABLES

NETWORK

S E RV I C E S

Connector Cleaner Choose from different hand held connector cleaners as an alternative to alcohol or solvent and wipes. All cartridges offer dry woven cloth which effectively remove dirt, dust, oil, grease, and debris from connector end faces. NEXTERA CLETOP-S series provides top qulity performance by easily and quickly cleans ferrule end-faces, the most important component in maintaining the quality of fiber-otpic connections. It's an alcholol-free dry cloth solution

Part #

Description

NC-CCC-1411A NC-CCC-1411B NC-CCC-1411A NC-CCC-1411B

CLETOP Type-A Automatic Connector Cleaner (for dust contamination) CLETOP Type-B Automatic Connector Cleaner (for oil contamination) Replacment Cartridge for CLETOP-S Type-A Replacment Cartridge for CLETOP-S Type-B

FIS Connector Cleaner While FIS Connector Cleaner is an affordable and essential tool in your otpical fiber kit. It's an alcholol-free dry cloth solution. Replacement reels available for all units

Part #

Description

NC-FIS-7111 NC-FIS-7112

FIS Connector Cleaner (25 ft.) Woven Film Replacement Reel (25 ft.)

CLETOP Precision Fiber Optic Swabs Compact, lightweight, disposable and safe to use, These CLETOP precision wrapped foam swabs provide outstanding particle entrapment in removal of tough contaminants. Both 2.5mm and 1.25mm swabs are best suitable for cleaning adapters, polish plates, and connector end faces.

Part #

Description

NC-CPS-250 NC-CPS-125

2.5mm CLETOP Precision Fiber Optic Swabs (50 Sticks per pack) 1.25mm CLETOP Precision Fiber Optic Swabs (50 Sticks per pack)

KIM Wipes Contains in a single box of KIM wipes are 280 tissues. The fiber optic industry demands a lint free product when used with alcohol for cleaning fiber and connector end faces.

Part #

Description

NC-KW-280T

Kim Wipes - 1 box

Automatic Alcohol Dispensing Bottle Convenient access to fluid protects product purity. Just press down and alcohol pumps up. Valve seals contents in bottle, and fluid remains contamination free. This 8 oz. opaque plastic dispenser has a wide bottom for added stability and features a locking pump mechanism.

Part #

Description

NC-ADB-8E NC-ADB-8L

Automatic Alcohol Dispensing Plastic Bottle (Empty) Automatic Alcohol Dispensing Plastic Bottle (Filled)

F AX : (051) 2855227

W EB :

WWW . NEXTERA . COM . PK

E MAIL :

INFO @ NEXTERA . COM . PK

101

OPTICAL FIBER NETWORK

CONSUMABLES AND MARKINGS

S E RV I C E S

Isopropyl Alcohol Used in cleaning fiber or connector end faces for better transmission performance (4 oz. container bottled with 99% isopropyl alcohol). The plastic gallon container may be used to refill the NEXTERA automatic dispensing bottle. Please note, all alcohol orders must be shipped by ground only and in regulated quantities.

Part #

Description

NC-IA-01

1 Liter Isopropyl Bottled Alchoho

Optical Couplant Optical couplant provides and effective way of reducing Fresnel reflections, and decreasing power loss in connectors and mechanical splices. Easy applied onto connector end faces and inside mechanical splices.

Part #

Description

NC-OC-0001

Matching Gel (.4 oz.)

Piano Wire A smart way to save a connector when a fiber breaks inside a ferrule during connectorization. Also an excellent tool to remove broken fiber from bare fiber adapters. The 0.004" (125um) diameter wiere is also used in connectorization process to apply epoxy to protruding fiber at ferrule. Sticky colored tabs provided to hold wire.

Part #

Description

NC-PW-8265

Flexible Piano Wire (8 pieces @3")

Wire Markers Number and Letters Brady's number and letter wire marker cards are available in a variety of materials and styles. These durable markers will stand up to harsh environments and ensure long-term wire identification.

Part # NC-12001

Description Wire Markers (numbers 1 to 33)

Optical Fiber Warning Tape Protect and locate buried optical fiber cable by placing buried warning tape above cable. A 10cm wide continuous strip labeled "Caution, Fiber Optic cable Buried Below". A very minimal cost provides added protection against possible fiber breakage. Available in standard yellow color. Other sizes available on request

101

FOR

Part #

Description

NC-OFWT-Y10

10cm wide, Yellow, Optical Fiber Warning Tape

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

PHONE: (051) 2855224-5

OPTICAL FIBER

MISCELLANEOUS

NETWORK

S E RV I C E S

Fiberscopes This low cost, high quality optical fiberscope is available with both 200X and 400X magnifications. It utilizes a white light LED for coaxial illumination to provide excellent detail of scratches and contamination. The fiberscope is powered by three AAA batteries which run at least 40 hours before replacement. The microscope is provided with a universal adapter for 2.5mm connectors including ST, FC, and SC. Adapters for other common connectors are also available.

Part #

Description

NC-M200 NC-M400 NC-MFAPC NC-MLC NC-MMTRJ NC-MSAPC

200X Optical Microscope with Coaxial Illumination 400X Optical Microscope with Coaxial Illumination FC/APC Adapter for Microscope LC Adapter for Microscope MTRJ for Microscope SC/APC Adapter for Microscope

Connector Heat Oven NEXTERA Connector Heat Oven includes 24 position holding block to cure a variety of connectors including FC, ST, SC, D4, LC and SMA. The front panel features temperature control and new power "on" light indicator, allowing the proper cure of several types of epoxy. The block design provides even heat distribution, minimizing connector heat loss. A thermometer is included with every oven. A curing stand is sold separately to provide easy placement of optical cords during curing.

Part #

Description

NC-CHO-220

24 Port Connector Heat Oven (220 V) with FC/ST/D4/SMA/SC connector block and Thermometer LC/MU Holding Block Curing Stand

NC-CHO-HBLC NC-CHO-CS

Dead Zone Eliminator Designed to aid in the testing of fiber optic cable when using an OTDR. The DZE is used with Optical Time Domain Reflectometers (OTDR's) to help minimize the effects of the OTDR's launch pulse on measurement uncertainty. Available in different fiber lengths.

Part #

Description

NC-DZE-S100 NC-DZE-S200 NC-DZE-S500 NC-DZE-S1000 NC-DZE-S1100

100 Meter Singlemode 200 Meter Singlemode 500 Meter Singlemode 1000 Meter Singlemode 1100 Meter Singlemode

Epoxy For Connectorization Each pre-measured two part packet contains the proper ratio for connectorization. Every packet includes specific directions for use with fiber optic connectors. One 2 gram package will prepare 25-35 connectors. One 4 gram package will prepare 50-70 connectors.

Part #

Description

NC-H15-080-R2 NC-T60-065-B2

Epoxy For Conectorization, 2gm, 15 Min Heat cure, 4 Hrs pot life, Quick Cure style Epoxy For Conectorization, 2gm, 1 Hr Heat cure, 2 Hrs pot life, Blue Dye style

Epoxy Application Syringe Individually packaged syringes are complete with syringe body and dispenser (needle), for injecting epoxy into the connector. A larger diameter applicator needle.

Part #

Description

NC-EAS-01

Empty Syringe w/needle

F AX : (051) 2855227

W EB :

WWW . NEXTERA . COM . PK

E MAIL :

INFO @ NEXTERA . COM . PK

101

OPTICAL FIBER NETWORK

S E RV I C E S

SPLICES ---- MECHANICAL/FUSION

3M Fibrlok Mechanical Splice

The Fibrlok has an insertion loss 7.75 lbs. Known for low reflection characteristics of -35dB. Using V groove technology, it requires no epoxy. Uses Fibrlok assembly tool 2501. Splice completed in 30 seconds after preparing fiber ends. Thermal stability of -400C to 800C. Now one part # fits 250-900µm buffer sizes.

Part #

Description

NC-UFS-3M2590 NC-UFS-3MFAT

Universal Fibrlok Splice for 250um-900um buffer sizes Fibrlok Assembly Tool

AMP Corelink Mechanical Splice The Corelink provides an average splice loss of .15dB on 125um fiber with an average installation time of 30 seconds. One splice style accepts 250um to 900um coating. Two assembly splice keys are provided with set of 12 splices.

Part # 503901-1

Description AMP Corelink Mechanical Splice

Fusion Splice Protection Sleeves NEXTERA Fusion Splice Heat Shrink Sleeves enable installers to protect and support fiber optic fusion points. A red colored splice sleeve wil allow you to identify resplice locations or help identify the individuals who actually performed splice. Splice sleeves shrink to a size that allows for use in most splice trays. The inner tube is made of a material which will completely melt around the fiber to provide a moisture resistant barrier.

Part #

Description

NC-FSHSS-60C NC-FSHSS-60R NC-FSHSS-40C

Fusion Sleeves (Clear) 60mm Fusion Sleeves (red) 60mm Fusion Sleeves 40mm

Elastomeric Lab Splice NEXTERA Elastomeric Lab Splice is ideal for making temporary fiber connections, since it can be disassembled and reused hundreds of times. To install splice for instrument testing, simply insert on a cleaved pigtail from OTDR or power meter to the cleaved unconnectorized fiber. Excellent for both multimode and single mode fiber, the housing receives 125um - 140um cladding diameters.

101

FOR

Part #

Description

NC-ELS-125140

Lab Splice

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

PHONE: (051) 2855224-5

Excellent Wireless LAN Networks

Broadband ON AIR Extension of Office Networking Backbone

Extension of Broadband Access

Hot-Spot & Outdoor Applications

Fusion Splicing in the Palm of Your Hand!

More Compact than ever!

High-end performance with super low cost!

S121A FTTH Splicer

FURUKAWA ELECTRIC

OPTICAL FIBER

FUSION SPLICERS

FURUKAWA ELECTRIC

NETWORK

Battery or AC/DC Power Options

A Clear View of the Splice

Compact, Lightweight Body

The S121A comes standard with a 2.5inch color LCD monitor, which displays a magnified image of the fibers as viewed by the CCD camera. This allows for simple and accurate confirmation of the splice quality. Both fibers are automatically inspected before the splice. Compared to FITEL' s S199, the S121A is 1/3 the size and weighs only 980g/2.21bs without the battery (battery weight is 170g/6 oz.). These compact dimensions allow you to splice in almost any location.

Handheld Splicing Very often in FTT(x) splicing, setting the splicer on a flat surface simply isn't possible. That is why the S121A is designed to be a handheld unit.

Superb Portability With the standard soft carrying case and strap, the S121A is just as portable as a camera. You can attach the carrying case to your belt for hands-free portability. (Also available is a hard carrying case, which holds necessary tools and accessories.)

S E RV I C E S

For cordless usage, the S121A comes with a rechargeable Lithium ion battery and recharge. The recharger can accommodate up to 2 batteries at a time. Remaining charge is displayed on the screen for easy monitoring. AC power is also available with the optional accessory(S959).

Heat Shrink Capability Again, similar to standard fusion splicers, the S121A offers an optional heat shrink oven for applying protection sleeves to the splice. An optional tool for applying non-shrink ULTRA sleeves also available.

Short Fiber Lengths

13 seconds and Fully Automatic

Thanks to the Tshape of the S121A, you can actually set the splicer inside the closure and splice with very short fiber lengths.

Operating the S121A is simple. Just set the fibers in place and press a button! The whole process, from fiber feed to tension test, is fully automatic.

ORDERING INFOR MATION

NAME

DESCRIPTION

8121A Standard Package Splicer Body Battery Soft Carrying Case Strap 250um Fiber Holders AC Adapter Battery Recharger Extra Electrodes Manual Electrode Cleaning Disk

S121-X-A-0001 S943 S121-X-A-0002 S121-X-A-0008 S709S-250 S957 S958 S963 S121-X-A-0006

S121A Optional Accessories Heat Shrink Oven Tool for ULTRAsleeve" Hard Carrying Case DC Adapter 900/im Fiber Holders Extra Battery Extra Electrodes

Types of Fiber Cladding Diameter Coating Diameter Average Loss Splice Time Heat Shrink Time Splicing Programs Tension Test Cleave Length Applicable Sleeve Lengths Dimensions Weight AC Input DC Input Battery Capacity

S121-X-A-0003 S121-X-A-0004 S121-X-A-0005 S959 S709S-900 S943 S963

F AX : (051) 2855227

SPECIFICATIONS

Operating Temp.

W EB :

WWW . NEXTERA . COM . PK

SM, MM; single fiber 125pm 250/900um*2 SM:0.10dB, MM: O.OSdB 13s(in room temperature) 120s 3(SM, MM, other) 1.96N(@200g) 10mm 40mm 140WX205DX95H(mm) [5.5'WX8"DX3.7'H] 980g/2.2lbs.(body), 170g/6 oz. (battery) 100—240V DC12~17V(Li-ion battery) 50 splices(splice only; does not include heat shrink) -10 to 50°C (without excessive humidity)

E MAIL :

INFO @ NEXTERA . COM . PK

101

The World's Fastest Core-Aligning Fusion Splicer

Average Splice Loss: SM (0.02dB )

OPTICAL FIBER

FUSION SPLICERS

FURUKAWA ELECTRIC

NETWORK

S E RV I C E S

S P E C I F I C AT I O N S Splicing Method: Fiber Types: Applicable Fibers: Typical Average Splice Loss:

Core Alignment (Profile Alignment System) Single Fiber SM , MM , PS, NZ-DS, EDF, TrueWaveRS® , LEAF® SM (0.02dB), MM (0.01 dB), PS (0.04dB) , TrueWaveRS® (O.OSdB), LEAF® ( 0.03dB)

(with identical fibers)

Splice Time: Heating Time: Coating Diameter/ Clad Diameter: Splice Programs: Splice Tension Test: Recom m ended Cleave Length: Protection Sleeve Programs: Monitor: Splice M em ory: V-groove Lighting: Temperature: Other Features:

11 seconds in high speed mode; 1 3 seconds in normal mode 85 seconds for 60mm sleeves; 40 secondsfor20mm sleeves 100 -1000um / 80-150|j.m 35 p re-installed, 29 user programmable 200g (0.4lbs) 5-1 6 mm / 250 um , 10 or 16 mm / 900 um and 400 um coating 7 pre-installed,1 user program m able 5" Color, 264x magnification 2000 Splices White LED -10° to +50°C (14° to 122°F) Short cut key, Auto start mode, Auto sleep mode, Remote control from PC, Attenuation Splicing : 0 to 10 dB by 0.1dB, Environmental sensor at the splice point, Fiber dimension measurement function

ORDERING INFOR MATION

NAME

DESCRIPTION

Typical Package for S176 CF & CR: S176CF(R) E-1110 S176-F(R)-A-0001-A S176CF(CR) Main body S176-X-S-0007-A S176 User's Manual (English) S176-X-A-0011-A Protection Sleeve Heater S176-X-A-0010-A S176CF/CR Carry ing Case S940 Battery Pack S176-X-A-0016-A 16mm Rber Holders S950 AC/ DC Converter S176-X-A-0017-A Recharging Cable S176-X-S-0002-A AC Power Cord S1 76-X-S-0003-A AC PI ug Adapter S176-X-S-0004-A Electrode Sharpener Spare Electrodes S1 76-X-S-0005-A Wedge-Shaped Base Optional Parts for S176CF & CROptional Parts for S176LP S176-X-A-0012-A Cool ing Tray S176-X-A-0013-A 10mm Rber Holders S176-X-A-0015-A RS232C Cord S176-X-A-0017-A Recharging Cable S176-X-S-0018-A Rexible Lamp S176-X-A-0019-A Foot Sw itch S176-X-A-0020-A Work Table S1 76-X-A-0023-A S176RCPCD S954A Battery Recharger / Discharger S532A Extra Sleeve Heater S955 DC Adapter S942 High Capacity Battery S176-X-A-0024-A Heater Cover S1 76-X-A-0025-A Fiber Holder Mount S176-X-A-0026-A Crimping Tool Mount S707-250 Fiber Holders S707-400 Fiber Holders S707-900 Fiber Holders

F AX : (051) 2855227

W EB :

NAME

DESCRIPTION

Typical Package for S176LP: S176LPE-1102 S176-L-A-0001-A S176-X-S-0007-A S176-X-A-0011-A S176-X-A-0021-A S176-X-A-0025-A S176-X-S-0002-A S176-X-S-0003-A S176-X-S-0004-A Beet rode Sharpener

S176LPMain Body S176 User's Manual Protection Sleeve Heater S176LP Carrying Case Rber Holder Mount AC Power Cord AC Plug Adapter Spare Electrodes

Optional Parts for S176LP S176-X-A-0013-A S176-X-A-0015-A S176-X-A-0016-A S176-X-S-0018-A S176-X-A-0019-A S176-X-A-0020-A S176-X-A-0023-A S176-X-A-0024-A S532A S942 S176-X-A-0026-A S707-250 S707-400 S707-900

WWW . NEXTERA . COM . PK

E MAIL :

10mm Rber Holders RS232C Cord 16mm Rber Holders Rexible Lamp Foot Switch Work Table S176RCPCD Heater Cover Extra Sleeve Heater High Capacity Battery Crimping Tool Mount Fiber Holders Fiber Holders Fiber Holders

INFO @ NEXTERA . COM . PK

101

NETWORK

OPTICAL FIBER CLEAVERS

S E RV I C E S

Ahcieve high quality cleaves with S323/S324 Fiber Cleavers

S322 S324 KEY FEATUR ES For 323 and 324: . Cutting blade locks in place after

scoring, preventing double scoring of fiber and also ensuring quality cleaving angles. . Automatic cleave function provides

constant cleaving pressure and improves cleave quality.

Introducing Furukawa Electric’s line of high precision three and four step cleavers. The S324 cleaver is an ergonomic, easy to use three step cleaver that replaces Fitel’s well known S321 cleaver. The S324 is a smaller," no frills" cleaver that produces consistent, high quality cleaves efficiently and quickly. Based on the S324 design, the S323 High Precision Cleaver incorporates a unique automatic waste fiber disposal system. This unique waste fiber collection system eliminates potentially hazardous waste fiber from the splice area and produces consistent high quality splicing. 1 Close lid

For 323 only: . Waste fiber deposits automatically

into a collection chamber,increasing cleaving efficiency by eliminating manual disposal and also eliminating hazardous waste fiber in the work area environment.

3 Close pinch roller

. Easily removable collection

chamber allows for safe and secure waste fiber disposal.

SPECIFICATIONS

4 Press to open lid

Applicable Optical Fiber Number of fibers: single fiber to 12-fiber ribbons (appropriate fiber holder is required for ribbons) Clad diameter: 0.125mm Coating diameter: 0.25mm and 0.9mm for single fiber; 0.3mm to 0.4mm thickness for ribbons

2 Slide blade Note: For S324 omit step 3.

ORDERING INFOR MATION Cleave length Type A:

Type B:

101

FOR

fixed length of 16mm or adjustable to 3–20mm with scale for single fiber; 10mm for ribbons fixed length of 10mm or adjustable to 3–20mm with scale for single fiber; 10mm for ribbons

PART NO.

WASTE FIBER COLLECTION

CLEAVE LENGTH

S323A S323B S324A S324B

Available Available Not Available Not Available

(Refer to the Cleave Length) Type A Type B Type A Type B

FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US:

PHONE: (051) 2855224-5

For detailed info and specs see page 00 to11

CLEAVER

MAX

Automatic cleaving (one action) Low cleaving angle: