EX3600-6

EX3600-6 SPECIFICATIONS

B A C K H O E B U C K E T C A PA C I T Y: ( S A E H E A P E D ) : 2 8 . 8 Y D 3 ( 2 2 . 0 M 3)

S H O V E L B U C K E T C A PA C I T Y ( H E A P E D ) : S A E ( 2 : 1 ) : 2 7 . 5 – 3 0 . 0 Y D 3 ( 2 1 . 0 – 2 3 . 0 M 3)

O P E R A T I N G W E I G H T:

B ackhoe 7 9 5 , 9 0 0 lb . ( 3 6 1 0 0 0 K G ) loading shovel 7 9 1 , 5 0 0 L B . ( 3 5 9 0 0 0 kg )

RATED POWER:

1,944 HP (1 450 KW)

EX3600-6 DIMENSIONS ªgª ªªMM ªgª ªªMM

ªgª ªªMM

ªgª ªªMM

ª ªMM  ªªMM

STA NDA RD EQUIPMENT Engine 140 A alternator Heavy-duty type air cleaner with dust ejector Cartridge-type engine oil filter Cartridge-type engine oil bypass filter Cartridge-type fuel filter Fan guard Isolation-mounted engine Auto-idle engine Emergency engine stop system Hydraulic drive cooling-fan system Hydraulic System E-P control system OHS (Optimum Hydraulic System) FPS (Fuel-saving Pump System) Hydraulic drive cooling-fan system Forced-lubrication and forced cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer Cab Sturdy cab with top guard conforming to ISO (OPG Level II) Fluid-filled elastic mounts Laminated glass windshield Reinforced/tinted (bronze color) side and rear windows Parallel-link-type intermittent windshield wiper Front windshield washer Adjustable reclining seat with air suspension Footrest Air horn with electric compressor Auto-tuning AM-FM radio with digital clock

ªgª ªªMM

ªgª ªªMM

ªgª ªªMM gª ªªMM

Seat belt Storage spaces Floor mat Auto air conditioner with defroster Rearview mirror Evacuation hammer Emergency escape device Trainer's seat Pilot control shut-off lever Monitor Systems Meters Hour-meter Fuel gauge Hydraulic oil temperature gauge Engine coolant temperature gauge Tachometer Engine oil pressure gauge Engine oil temperature gauge Battery voltage gauge Ambient temperature Warning Indicators Alternator Engine stop Coolant overheat Hydraulic oil level Auto lubrication Fast-filling Tension Electric lever Emergency engine stop Top valve Engine over run Coolant level Engine oil pressure Pump transmission oil level indicator Exhaust temperature Fuel temperature Engine warning

ªgª ªªMM ªgª ªªMM

Hydraulic oil overheat Stairway position Electrical equipment box Pump contamination Air cleaner restriction Satellite data transmitting system Data Logging System DLU (Data-logging unit) continuously records performance of the engine and the hydraulic system. The record can be downloaded by PC and PDA. Lights 9 working lights, 2 entrance lights, 7 maintenance lights, 2 cab lights Upperstructure Lockable machine covers 88,630 lb. (40 200 kg) counterweight Hydraulic drive grease gun with hose reel Retractable ladder with spring type balancer Swing parking brake Undercarriage Travel parking brake Travel motion alarm device Hydraulic track adjuster with N2 gas accumulator and relief valve 50 in. (1 270 mm) triple grouser shoes Miscellaneous Standard tool kit ISO conforming stairs and handrails Recirculation air filter for air conditioner Ventilation air filter for air conditioner 12 V power terminal board Stop valve for transport and reassembly Auto-lubrication system (Lincoln) for frontattachment pins, swing bearing, and center joint. Fast-filling drop down panel with Wiggins coupler for fuel, engine oil, engine coolant, grease, pump transmission oil, and swing device oil.

O P T I O NA L E Q U I P M E N T High brightness working lights Back and right side cameras with color monitor Travel motor guard Travel device guard Electric oil pump to draw hydraulic oil from suction and return pipe lines

EX3600-6 SPECIFICATIONS ENGINE Make Model Type Aspiration Net Power @ 1800 rpm (DIN 6271) Net Power @ 1800 rpm (SAE J1349) Gross Power @ 1800 rpm (SAE J1995) Maximum Torque @ 1500 rpm Bore & Stroke Displacement Batteries Starting Cold Starting

Cummins QSK60-C 4 cycle Turbocharged and after cooled, direct injection chamber-type diesel engine 1,968 ps (1 450 kW) 1,944 hp (1 450 kW) 1,944 hp (1,450 kW) 6,156 lbf-ft (8 346 N-m) 6.3 in. x 7.5 in. (159 x 190 mm) 3,741 cu. in. (60.4 liters) 4 x 12 V, 4 x 220 AH 24-volt electric Ether aided

HYDR AULIC SYSTEM Hitachi’s Electronic Total Control System (ETS) achieves maximum efficiency, productivity, and operator comfort through reduced fuel consumption, lower noise levels, optimized engine-pump functions, and excellent controllability. Engine-Pump Control (E-P) Main pumps are regulated by electronic engine-speed sensing control system. Optimum Hydraulic System Four tandem-axial piston pump groups (eight pumps in total), supply a four-valve hydraulic system enabling both independent and combined operations of all functions. Additional Features Fuel-Saving Pump (FPS) system Auto-idling system Hydraulic-drive cooling-fan system for oil cooler Forced-lubrication and forced-cooling pump drive system Main Pumps Eight variable-displacement, piston pumps in four tandem-axial pump groups for front attachment, travel, and swing functions. Pressure setting 4,270 psi (300 kgf/cm²) (29.4 MPa) Max. oil flow 8 x 132.1 gal/min (8 x 500 L/min) Pilot Pump Gear pump Pressure setting Maximum oil flow

640 psi (4.4 MPa) (45 kgf/cm²) 29.0 gal/min (110 L/min)

Relief Valve Settings Implement circuit Swing circuit Travel circuit Pilot circuit

4,270 psi (300 kgf/cm2) (29.4 MPa) 4,270 psi (300 kgf/cm2) (29.4 MPa) 4,270 psi (300 kgf/cm2) (29.4 MPa) 640 psi (450 kgf/cm2) (4.4 MPa)

Hydraulic Cylinders High-strength piston rods and tubes. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Bucket cylinder of loading shovel is provided with protector.

Boom Arm Bucket

Cylinder Dimensions (Backhoe) Quantity Bore 2 14.2 in. (360 mm) 2 11.8 in. (300 mm) 2

9.8 in. (250 mm)

Rod Diameter 10.2 in. (260 mm) 8.7 in. (220 mm) 7.1 in. (180 mm)

Boom Arm Level Bucket Dump

Cylinder Dimensions (Loading Shovel) Quantity Bore 2 14.2 in. (360 mm) 1 11.8 in. (300 mm) 1 14.2 in. (360 mm) 2 11.0 in. (280 mm) 2 8.9 in. (225 mm)

Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Filters are centralized for convenient maintenance. Quantity Full flow filter 5 10 µm High pressure strainer (In main & swing pump delivery line) 8 80 meshes Drain filter (For all plunger type pumps & motors) 1 10 µm Pilot filter 1 10 µm By-pass filter (In oil cooler by-pass line) 1 5 µm

Rod Diameter 10.2 in. (260 mm) 8.7 in. (220 mm) 10.2 in. (260 mm) 7.9 in. (200 mm) 5.1 in. (130 mm)

EX3600-6 SPECIFICATIONS CONTROL S Two Implement Levers Wrist control type electric lever. Right lever is for boom and bucket control, left lever for swing and arm control. For loading shovel, two pedals provided for opening/closing the bottom dump bucket. Two Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. UPPERSTRUCTURE Revolving Frame Deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Deck machinery is positioned for maximum maintenance accessibility. Sidewalks provide easy access to engines, hydraulic and electrical components. ISO-compliant stairs and handrails. Sidewalks and stairs are provided with skid-resistant plates. SWING MECHANISM Four high-torque, axial-piston motors with two-stage planetary reduction gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Swing parking brake is spring-set, hydraulic released disc type. This parking brake is manually releasable. Swing Speed 3.2 min-1 (rpm) O perator ’ s C a b The sturdy cab, with the top guard conforming to OPG Level II (ISO), protects the operator from falling objects. Independent, pressurized, 1 800 mm wide, 2 150 mm high, roomy 7.5m³ cab with tinted-glass windows features all-round visibility. Spring-suspension type, fully adjustable reclining seat with arm rests; movable with or without front & swing control levers by slide. Instrument and control panel are built in cab wall in easy range of the operator. Three air conditioner system. Noise level 76 dB (A) in the cab at maximum engine speed under no-load condition. Eye level height 22 ft. 2 in. (6 760 mm) U N DE R C A R R I A G E Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster provided with N2 gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-Type Undercarriage Triple grouser track shoes of induction-hardened cast steel Shoe Width 50 in. (1 270 mm) Number of Rollers and Shoes (each side) Upper Rollers Lower Rollers Track Shoes

3 8 38

Traction Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. two-stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/hydraulic-released disc type. This parking brake is manually releasable. Travel Speeds Low: 1.5 mph (2.2 km/h) High: 1.0 mph (1.7 km/h) Max. Traction Force 395,700 lbf (179 500 kgf) Gradability 30° (60%) continuous WEIGHTS AND GROUND PRESSURE Loading Shovel: Equipped with 27.5 yd³ (21.0 m³) (SAE heaped) bottom dump bucket. Shoe Type Triple Grousers

Shoe Width 50 in. (1 270 mm)

Operating Weight 795,900 lb. (361 000 kg)

Ground Pressure 27.4 psi (189 kPa) (1.93 kgf/cm³)

Backhoe: Equipped with 31 ft. 6 in. (9.6 m) BE-boom, 14 ft. 9 in. (4.5 m) BE-arm, and 29.0 yd³ (22.0 m³) (SAE heaped) bucket Shoe Type Triple Grousers

Shoe Width 50 in. (1 270 mm)

Operating Weight 791,500 lb. (359 000 kg)

Ground Pressure 27.3 psi (188 kPa) (1.92 kgf/cm²)

B A C K H O E C O N T R O L L AY O U T

4

1. Left Console 2. Left Control Lever/Horn Switch 3. Left Travel Pedal 4. Left Travel Lever 5. Right Travel Lever 6. Right Travel Pedal 7. Right Control Lever/Horn Switch 8. Right Console 9. Operator's Seat 10. Bucket Close Pedal (For Loading Shovel) 11. Bucket Open Pedal (For Loading Shovel) 12. Pilot Control Shut-Off Lever 13. Rear Console 14. Emergency Engine Stop Switch 15. Engine Speed Control Dial 16. Key Switch 17. Monitor Display

5







  3



6

2

7

1

8 

9 

S E R V I C E R E F I L L C A PA C I T I E S US Gallons 1,968 162 69 75 14 4 x 20 2 x 58 1,057 502

Fuel Tank Engine Coolant Engine Oil (Engine Oil Pan) Engine Oil (Reserve Tank) Pump Drive Swing Device (each side) Travel Final Device (each side) Hydraulic Tank Hydraulic System

Liters 7 450 614 261 284 52 4 x 75 2 x 220 4 000 1 900

Imperial Gallons 1,639 135 57 62 11.4 4 x 16.5 2 x 48.4 880 418

DE C K M A C H I N E R Y L AY O U T 



  

8 6



7



9 5







 1

 

4



2



3 



1. Engine 2. Engine Radiator 3. LTA Radiator 4. Fan Motor x 4 5. Air Filter x 4 6. Hydraulic Pump x 8 7. High-Pressure Strainer x 8 8. Battery Unit 9. Engine-Pump Bulkhead 10. Muffler 11. Swing Device x 4 12. Control Valve x 4 13. Center Joint 14. Hydraulic Oil Tank 15. Fuel Tank 16. Hydraulic Oil Cooler x 4 17. Hydraulic Oil Cooling Fan Motor x 2 18. Lubricator 19. Cab 20. Folding Stairs 21. Ladder 22. Reserve Tank (Engine Oil) 23. Pump Mission Oil Cooler 24. Fuel Cooler 25. Reserve Tank (Coolant) 26. Engine-Radiator Bulkhead

EX3600-6 SPECIFICATIONS L OA DING SHOV EL AT TACHMENT Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. Efficient, automatic level crowing achieved by one-lever control because parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism). Boom and arm are all-welded, low-stress, high-tensile strength steel full-box section design. Efficient, automatic level crowding achieved by one-lever control because parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism). Dual-support-type boom/arm/bucket pin linkage Pin seals (in all portions) plus O-ring at arm top All cylinders are provided with a cylinder cushion mechanism Bucket cylinders with loading shovel are provided with an internal cylinder rod protector

&EET -ETERS      

 

  

 

  

    

 

  



 

 



 

 



 

 









 

 -ETERS  &EET

Working R anges—Bucket capacity: 27.5 yd³ (21.0 m³) A. Min. digging distance B. Min. level crowding distance C. Level crowding distance D. Max. digging reach E. Max. cutting height E1. Max. dumping height F. Max. digging depth G. Working radius at max. dumping height H. Max. bucket opening width Arm crowding force Breakout force

19 ft. 2 in. (5 850 mm) 29 ft. 1 in. (8 870 mm) 16 ft. 7 in. (5 050 mm) 49 ft. 11 in. (15 220 mm) 53 ft. 6 in. (16 300 mm) 36 ft. 1 in. (10 990 mm) 12 ft. 0 in. (3 910 mm) 28 ft. 5 in. (8 650 mm) 6 ft. 5 in. (1 950 mm) 269,800 lb. (122 000 kgf) (1 200 kN) 254,000 lb. (115 000 kgf) (1 130 kN)

Bucket (S A E H eaped 2: 1) Capacity 27.5 yd³ (21.0 m³) 30.0 yd³ (23.0 m³)

Width 13 ft. 8 in. (4 160 mm) 13 ft. 8 in. (4 160 mm)

Number of Teeth 6 6

Weight 59,300 lb. (26 900 kg) 60,190 lb. (27 300 kg)

Type Bottom dump type, general purpose Bottom dump type, general purpose

Materials Density 3,033 lb./yd³ (1 800 kg/m³) 2,700 lb./yd³ (1 600 kg/m³)

Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear protection system for your application. Please do not use the buckets without proper wear protection for your application.

BACKHOE ATTACHMENT Boom and arm are all-welded, low stress, full-box section design. Bucket of all-welded high-strength steel structure. Bucket/arm joint pins are floating type. Replaceable thrust plates are provided with bucket/arm point part. Auto-lubrication system for all pins is standard.

&EET -ETERS   

&EET -ETERS   

  

 











 

 









   

 

 

 



 

 



  

 

 

 



 

 

 







 

 



 

 



 



 

 

 -ETERS  &EET

 



 

 



 







 



 

 -ETERS  &EET

Working R anges Boom Length Arm Length

31 ft. 6 in. (9.6 m) 14 ft. 9 in. (4.5 m) 59 ft. 8 in. (18 190 mm) 57 ft. 9 in. (17 600 mm) 28 ft. 2 in. (8 580 mm) 27 ft. 10 in. (8 490 mm) 58 ft. 1 in. (17 690 mm) 38 ft. 0 in. (11 590 mm) 13 ft. 4 in. (4 060 mm) 209,500 lb. (932 kN) 236,000 lb. (1 050 kN) 207,300 lb. (922 kN) 213,800 lb. (952 kN)

A. Max. digging reach A1. Max. digging reach (on ground) B. Max. digging depth B1. Max. digging depth (8 ft. level) C. Max. cutting height D. Max. dumping height E. Max. vertical wall depth SAE ISO SAE ISO

Bucket Digging Force Arm Crowd Force

Bucket Capacity SAE Heaped (1:1) 29.0 yd.³ (22.0 m³)

Width Without Side Cutters 12 ft. 5 in. (3 790 mm)

Number of Teeth 6

Weight

Type

Materials Density

40,570 lb. (18 400 kg)

General purpose bucket

3,033 lb./yd³ (1 800 kg/m³)

Note: These buckets do not include any type of wear protection for sides, bottom, and inside the bucket. Please consult your local Hitachi dealer for a proper wear protection system for your application. Please do not use the buckets without proper wear protection for your application.

EX3600-6 SHIPPING INF ORM ATION EX3600-6 components are designed for ease of transportation and on-site assembly. Components can be assembled without welding.

UPPERSTRUCTURE

¬FT¬¬IN ¬¬MM ¬

3IDEWALK 7EIGHT¬¬LB¬¬KG

3IDEWALK 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

3IDEWALK 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

3IDEWALK 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

#AB¬¬!SSEMBLY 7EIGHT¬ ¬LB¬¬¬KG

¬FT¬¬IN ¬¬MM ¬

(ANDRAIL 7EIGHT¬¬LB¬¬KG

7IDTH¬¬FT¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

7IDTH¬¬FT¬¬IN¬¬MM

7IDTH¬¬FT¬¬IN¬¬MM

"ED¬!SSEMBLY¬,EFT 7EIGHT¬ ¬LB¬¬¬KG

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬MM ¬

¬FT¬¬IN ¬¬MM ¬

3IDEWALK 7EIGHT¬¬LB¬¬KG

7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬

7IDTH¬¬FT¬¬IN¬¬¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬¬MM ¬ ¬FT¬¬IN ¬¬MM ¬ 7IDTH¬¬FT¬¬IN¬¬MM

3TEP 7EIGHT¬¬LB¬¬KG

7IDTH¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

7IDTH¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

7IDTH¬¬FT¬¬IN¬¬¬MM

3IDEWALK 7EIGHT¬¬LB¬¬KG

3IDEWALK 7EIGHT¬¬LB¬¬KG

7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬ 7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬MM ¬

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬MM ¬

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬ 7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬ 7IDTH¬¬FT¬¬IN¬¬MM

7IDTH¬¬FT¬¬IN¬¬MM

3WITCHBOX 7EIGHT¬¬LB¬¬KG

3IDEWALK 7EIGHT¬¬LB¬¬KG

-AIN¬&RAME¬!SSEMBLY 7EIGHT¬ ¬LB¬¬¬KG

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬MM ¬

¬FT¬¬IN ¬¬MM ¬ 7IDTH¬¬IN¬¬MM

7IDTH¬¬FT¬¬IN¬¬MM

&OLDING¬3TAIRS 7EIGHT¬ ¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

7IDTH¬¬FT¬¬IN¬¬¬MM

"OX 7EIGHT¬ ¬LB¬¬KG

"ED¬!SSEMBLY¬2IGHT 7EIGHT¬ ¬LB¬¬¬KG

¬FT¬¬IN ¬¬MM ¬ 7IDTH¬¬FT¬¬IN¬¬¬KG

3IDEWALK¬ 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬ 7IDTH¬¬FT¬¬IN¬¬¬MM

3IDEWALK¬ 7EIGHT¬¬LB¬¬KG

3IDEWALK¬ 7EIGHT¬¬LB¬¬KG

3IDEWALK¬ 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

(OSE¬2EEL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬MM ¬ ¬FT¬¬IN ¬MM

7IDTH¬¬FT¬¬IN¬¬¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

7IDTH¬¬FT¬¬IN¬¬MM 7IDTH¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

7IDTH¬¬FT¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

7IDTH¬¬IN¬¬MM

7IDTH¬¬IN¬¬MM

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬ 7IDTH¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬MM ¬

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬MM

3TEP 7EIGHT¬¬LB¬¬KG

7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬

7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬

3UCTION¬-ANIFOLD 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM ¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬MM 7IDTH¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬MM 7IDTH¬¬IN¬¬MM

3IDEWALK 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬MM

7IDTH¬¬FT¬¬IN¬¬MM

7IDTH¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

7IDTH¬¬FT¬¬IN¬¬MM

$OOR 7EIGHT¬¬LB¬¬KG ¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM ¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

7IDTH¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

3IDEWALK 7EIGHT¬¬LB¬¬KG

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬MM

7IDTH¬¬FT¬¬IN¬¬MM

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM

7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬MM ¬

7IDTH¬¬FT¬¬IN¬¬¬MM

3IDEWALK 7EIGHT¬¬LB¬¬KG

"RACKET 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬MM ¬

7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬MM

7IDTH¬¬FT¬¬IN¬¬¬MM

"RACKET 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬MM

7IDTH¬¬FT¬¬IN¬¬¬MM

2ESERVE¬4ANK¬#OOLANT 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬¬MM ¬

!IR¬#LEANER¬AND¬-UFFLER 7EIGHT¬ ¬LB¬¬¬KG

#OVER 7EIGHT¬¬LB¬¬KG

7IDTH¬¬IN¬¬MM

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬MM

7IDTH¬¬FT¬¬IN¬¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM ¬

¬FT¬¬IN ¬MM ¬

¬FT¬¬IN ¬MM ¬

7IDTH¬¬FT¬¬IN¬¬MM

%NGINE¬5NIT 7EIGHT¬ ¬LB¬¬¬KG

¬FT¬¬IN ¬MM ¬

¬FT¬¬IN ¬MM ¬ ¬FT¬¬IN ¬¬MM ¬

¬FT¬¬IN ¬MM ¬

3UCTION¬0IPE 7EIGHT¬¬LB¬¬KG

3UCTION¬0IPE 7EIGHT¬¬LB¬¬KG

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM

3TEP 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬MM ¬

3TEP 7EIGHT¬¬LB¬¬KG

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

7IDTH¬¬IN¬¬MM

7IDTH¬¬FT¬¬IN¬¬MM

#OUNTERWEIGHT 7EIGHT¬ ¬LB¬¬¬KG

2ESERVE¬4ANK¬%NGINE¬/IL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

7IDTH¬¬FT¬¬IN¬¬¬MM

7IDTH¬¬FT¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM ¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

7IDTH¬¬IN¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM ¬FT¬¬IN ¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬MM

7IDTH¬¬FT¬¬IN¬¬MM

3IDEWALK 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

(ANDRAIL 7EIGHT¬¬LB¬¬KG

7IDTH¬¬FT¬¬IN¬¬MM

U ndercarriage

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

3TEP 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬MM

-OTOR¬#OVER¬3TAY 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬MM

7IDTH¬¬IN¬¬MM

7IDTH¬¬IN¬¬MM

¬FT¬¬IN ¬¬MM

4RACK¬3IDE¬&RAME¬!SSEMBLY 7EIGHT¬ ¬LB¬¬¬KG ¬™¬

¬FT¬¬IN ¬¬MM 7IDTH¬¬FT¬¬IN¬¬¬MM

3TOPPER 7EIGHT¬¬LB¬¬KG

¬¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

4RACK¬#ENTER¬&RAME¬!SSEMBLY 7EIGHT¬ ¬LB¬¬¬KG

¬FT¬¬IN ¬¬MM 7IDTH¬¬IN¬¬MM

7IDTH¬¬FT¬¬IN¬¬¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

,ADDER 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM ¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

#OVER 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

#OVER 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

#OVER 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬¬MM

#OVER 7EIGHT¬¬LB¬¬KG

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

L oading S hovel A ttachments (ANDRAILS 7EIGHT¬¬LB¬¬KG ¬™¬

,ADDER 7EIGHT¬¬LB¬¬KG

,ADDER 7EIGHT¬¬LB¬¬KG

"OOM¬!SSEMBLY 7EIGHT¬ ¬LB¬¬¬KG

¬FT¬¬IN ¬MM ¬

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬¬MM

!RM¬#YLINDER 7EIGHT¬ ¬LB¬¬¬KG ¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

7IDTH¬¬FT¬¬IN¬¬¬MM

!RM¬!SSEMBLY 7EIGHT¬ ¬LB¬¬¬KG

"UCKET¬#YLINDERS 7EIGHT¬ ¬LB¬¬¬KG ¬™¬ ¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

7IDTH¬¬FT¬¬IN¬¬¬MM

"UCKET¬!SSEMBLY¬WITH¬"UCKET¬0OINTS

Bucket Capacity 27.5 yd³ (21.0 m³) 30.0 yd³ (23.0 m³)

A ft. in. (mm) 12 ft. 9 in. (3 890 mm) 13 ft. 9 in. (4 190 mm)

B ft. in. (mm) 11 ft. 9 in. (3 570 mm) 11 ft. 10 in. (3 600 mm)

Max. Width ft. in. (mm) 13 ft. 8 in. (4 160 mm) 13 ft. 8 in. (4 160 mm)

Weight lb. (kg) 59,300 lb. (26 900 mm) 60,190 lb. (27 300 mm)

Backhoe A ttachments (ANDRAILS 7EIGHT¬¬LB¬¬KG ¬™¬

¬FT¬¬IN ¬MM

¬FT¬¬IN ¬¬MM

"OOM¬!SSEMBLY 7EIGHT¬ ¬LB¬¬¬KG

¬FT¬¬IN ¬¬MM ¬FT¬¬IN ¬¬MM 7IDTH¬¬IN¬¬MM

!RM¬!SSEMBLY 7EIGHT¬ ¬LB¬¬¬KG

"UCKET¬!SSEMBLY 7EIGHT¬ ¬LB¬¬¬KG #APACITY¬¬YD¨¬¬M¨ ¬3!%¬(EAPED

¬FT¬¬IN ¬¬MM

¬FT¬¬IN ¬¬MM

7IDTH¬¬FT¬¬IN¬¬¬MM

¬FT¬¬IN ¬¬MM 7IDTH¬¬FT¬¬IN¬¬¬MM

¬FT¬¬IN ¬¬MM 7IDTH¬¬FT¬¬IN¬¬¬MM

,OAD¬ 2ADIUS

L I F T I N G C A PA C I T I E S R ating over side or 3 6 0 - degrees

,OAD¬0OINT¬(EIGHT

R ating over front

U nit 1 , 0 0 0 l b . ( 1 0 0 0 K G )

,IFTING¬#APACITY

L oad R adius Conditions

Load Point Height

26 ft. 3 in. (8 m)

32 ft. 10 in. (10 m)

42 ft. 8 in. (13 m) 39 ft. 4 in. (12 m) 32 ft. 10 in. (10 m)

BE-boom: 31 ft. 6 in. (9.6 m) BE-arm: 14 ft. 9 in. (4.5 m) Bucket SAE: 28.5 yd³ (22.0 m³)

26 ft. 3 in. (8 m) 19 ft. 8 in. (6 m) 13 ft. 1 in. (4 m) 6 ft. 7 in. (2 m) 0 (Ground) -6 ft. 7 in. (-2 m) -13 ft. 1 in. (-4 m) -16 ft. 5 in. (-5 m)

*138.5 (*62.8) *128.1 (*58.1) *99.4 (*45.1)

*138.5 (*62.8) *128.1 (*58.1) *99.4 (*45.1)

*97.9 (*44.4) *175.5 (*79.6) 168.9 (76.6) 162.9 (73.9) *147.5 (*66.9) *113.5 (*51.5) *90.4 (*41.0)

*97.9 (*44.4) *175.5 (*79.6) 178.1 (80.8) 168.7 (76.5) *147.5 (*66.9) *113.5 (*51.5) *90.4 (*41.0)

39 ft. 4 in. (12 m)

*65.0 (*29.5) *68.3 (*31.0) *65.7 (*29.8) *69.2 (*31.4) *87.1 (*39.5) *130.1 (*59.0) 122.6 (55.6) 117.7 (53.4) 115.7 (52.5) *88.2 (*40.0) *66.8 (*30.3)

*65.0 (*29.5) *68.3 (*31.0) *65.7 (*29.8) *69.2 (*31.4) *87.1 (*39.5) *130.1 (*59.0) *136.9 (*62.1) *131.2 (*59.5) *116.0 (*52.6) *88.2 (*40.0) *66.8 (*30.3)

At Maximum Reach 45 ft. 11 in. (14 m)

*61.7 (*28.0) *70.3 (*31.9) *80.5 (*36.5) *96.3 (*43.7) 91.7 (41.6) 88.4 (40.1) *86.0 (*39.0) *52.5 (*23.8)

*61.7 (*28.0) *70.3 (*31.9) *80.5 (*36.5) *97.7 (*44.3) *107.8 (*48.9) *105.8 (*46.0) *86.0 (*39.0) *52.5 (*23.8)

49 ft. 3 in. (15 m)

*60.0 (*27.2) *72.3 (*32.8) 83.1 (37.7) 79.6 (36.1) 77.4 (35.1) *67.9 (*30.8)

Notes: 1. Ratings are based on SAE J1097. 2. Lifting capacity of the EX Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is a hook (not standard equipment) loaded on the back of the bucket. 4. *Indicates load limited by hydraulic capacity.

*60.0 (*27.2) *72.3 (*32.8) *84.0 (*38.1) *95.5 (*43.3) *87.3 (*39.6) *67.9 (*30.8)

52 ft. 6 in. (16 m)

*58.4 (*26.5) *60.9 (*27.6)

*58.4 (*26.5) *60.9 (*27.6)

*44.0 (*15.4) *32.9 (*14.9) *31.8 (*14.4) *32.0 (*14.5) *33.1 (*15.0) *35.5 (*16.1) *39.2 (*17.8) *40.8 (*18.5)

*44.0 (*15.4) *32.9 (*14.9) *31.8 (*14.4) *32.0 (*14.5) *33.1 (*15.0) *35.5 (*16.1) *39.2 (*17.8) *40.8 (*18.5)

ft. in. (meter) 34 ft. 10 in. (15.8 m) 35 ft. 11 in. (16.3 m) 37 ft. 8 in. (17.1 m) 38 ft. 10 in. (17.6 m) 39 ft. 0 in. (17.7 m) 38 ft. 7 in. (17.5 m) 37 ft. 8 in. (17.1 m) 35 ft. 11 in. (16.3 m)

O U R NA M E L O O K S G O O D O N O R A N G E .

It’s our color. It’s our brand. New product-support initiatives and our strengthened dealer network is more proof that we are as passionate as ever about this industry. We are dedicated to building the best equipment in the world and keeping it painted Hitachi Orange.

www.hitachimining.com

DKAEX3600HT Litho in U.S.A. (08-04)

Specifications and design subject to change without notice.