Ericsson WinFIOL OSS Commands

Oss commands 1.

To see the TG of particular cellrxtcp:moty=rxotg,cell=(cell name);

2. To see the cf with faults rxmfp:mo=rxocf-(tgno.);

3. To see the tgrxcdp:mo=rxotg-(tgno.);

4. To see the all tru status rxmfp:mo=rxotrx-(tgno.)-(trutei);

5. To see the cf rxmsp:mo=rxocf-(tgno);

6. To see all the devices rxapp:mo=rxotg-(tgno);

7. To see alarm rxasp:mo=rxocf-(tgno.);

8. To see all cf of BSC rlcrp:cell=all;

9. To see all data of Cell rlcrp:cell=(cellname);

10. To see the the software version and cabinet type,BTS-tie value rxmop:mo=rxocf-(tgno);

11. To see external alarm for level 1 allip:acl=a1;

for level 2 allip:acl=a2;

12. to BLOCK the CF rxbli:mo=rxocf-(tgno),subord,force;

the trx rxbli:mo=rxotrx-(tgno)-(trutei),subord, force;

the tx rxbli:mo=rxotx-(tgno)-truei),force;

the tf rxbli:mo=rxotf-(tgno),force; 13. To Deblock the CF rxble:mo=rxocf-(tgno),subord;

the trx rxble:mo=rxotrx-(tgno)-(trutei)subord;

the tx rxble:mo=rxotx-(tgno)-(trutei);

the tf rxble:mo=rxotf-(tgno); 14. To get the Dip name rxapp:mo=rxotg-(tgno); radep:dev=(device of cf); ntcop:snt=(etmno);

15. To see the Dip dtstp:dip=(dipname);

16. To see quality of dip dtqup:dip=(dipname);

17. To reset the dip dtqsr:dip=(dipname),sf,degr,unacc;

18. To see all halted cell in bsc rlcrp:cell=all,state=halt;

19. To out of service cf rxese:mo=rxocf-(tgno),subord; trx rxese:mo=rxotrx-(tgno)-(trutei),subord; tx rxese:mo=rxotx-(tgno)-(trutei); tf rxese:mo=rxotf-(tgno); 20. To in service cf rxesi:mo=rxocf-(tgno),subord; trx rxesi:mo=rxotrx-(tgno)-(trutei),subord; tx rxesi:mo=rxotx-(tgno)-(trutei); tf rxesi:mo=rxotf-(tgno); 21. Some Tip

1. Firstly block the______ 2. Then out of service the___________ 3 Then in service the____________ 4. And then de block the___________ 22. To check the channel rxbdp:cell=(cellname); rxbdc:cell=(cellnm),