Gaussian / Rayleigh Default Value - Dependent on the Noise Model Selected.
Eb/No F.E.R Mapping
Eb/No Speed and Delta
Default Value
4.8
db
Eb/No Speed and Dependency
Power control Head room and Average Power Rise.
Speed Relation
db
Mobile TX Power Gain
Soft \ Softer HO - Speed and Delta Eb/No
db
Average Power Rise Gain
Soft \ Softer HO - Speed and Delta Eb/No
db
Power Control Head Room Gain
Soft \ Softer HO - Speed and Delta Eb/No
DL Bearer Settings Bearer
Same as UL bearer for CS service
Eb/No Speed and Delta
Eb/No
db
6.2
Eb/No Speed and Dependency
db
Max TX Power
Max Allowed Channel power for that service Bearer.
35.10
dbm
Services General Traffic Characteristic
CS Activity Factor %
Voice (Circuit Switched)
Y
Real Time Data ( Circuit Switched)
Not Supported Bearer
Non Real time Data ( Packet Switched) Amount of service activity depending on the service given to a terminal.
Not Supported Bearer UL %
50
DL %
50
Carriers/ Cell Layers
Avaliable / Supported
UMTS UL Bearer
Avaliable UL Bearers
Carrier 1
Supported UL Bearers
UMTS DL Bearer
Pow Activity
%
Res Activity
%
Avaliable DL Bearers AMR 12.2
Supported DL Bearers
Res Activity
Input Value at CS Activity Factor % Tab = 50 Input Value at CS Activity Factor % Tab = 100
1: Precedence Class
2- Standard
2: Traffic Class
Interactive Data
Pow Activity
Packet Switched
AMR Input Value at CS Activity Factor % Tab = 50 Input Value at CS Activity Factor % Tab = 100
ARQ Reliability 1: Max # re-transmission
No.
3
2: re-transmission timeout
Sec
0.1
Bearer Activities Values to be selected from WWW Model Acivity Calculated from WWW Model Downlink Uplink
Recalculate from Packet Mode Override Packet Mode WWW Model Mean packet size
bytes
480
Mean # packet calls / session
calls
5
480 5
Reading time between calls
seconds
12
12
Mean # packets in a call
packets
25
25
Inter-packet arrival time
seconds
0.1
0.1
BLER working point
%
25
25
Terminals General
Name Technology
UMTS
Traffic Association Scale Traffic
Clutter
Feature Name
Master %
0 Depends on the Map Clutter Directory.
Select Weights This is for Vendor Acceptance Only:
Clutter Class
% In-Building
Airport Commercial/Industrial Forested/Dense vegetation Grass/Agriculture High Density Urban/ Building Marsh/Wetland Open Residential with Few Trees Residential with trees Transportation Water This is for Internal Acceptance Only:
Clutter Class
2
100
30
100
5
100
5
100
5
100
1
100
6
100
20
100
20
100
6
0
0
% In-Building
Weights
Airport Commercial/Industrial Forested/Dense vegetation Grass/Agriculture High Density Urban/ Building Marsh/Wetland Open Residential with Few Trees Residential with trees Transportation Water
Vectors
Weights
100
100
2
60
30
100
5
100
5
60
5
100
1
100
6
60
20
60
20
100
6
0
0
Depends on the Map Vector Directory
Feature Name
Weights Polygons
Depends on the Map Vector Directory Traffic to be distributed inside a Polygon.
Feature Name Traffic
Mobile Speed Services
Tab has all the services defined in the Service settings Service assigned to the terminal.
Avaliable Allocated
Vendor Acceptance WCDMA Parameters
Max Mobile Power
dbm
21
TX Dynamic Range
db
Required RSCP
dbm
70
Required Ec/Io
db
-14
Required Pilot SIR
db
-12
Power Step Size
db
0.5
Antenna Gain
db
0
Body Loss
dbi
2
Noise Figure
db
7
-105
Service Type Vendor
Comments
Ericsson Comments
AMR AMR AMR
Vendor Dependent Value
AMR
TU3 value ok. TU50 needed (6.0dB)
AMR Vendor Equipment Specific Configuration.
Embeded Sheet " Parameter Values"
TU3 value=7.2. TU50 needed (7.7dB)
AMR Embeded Sheet " Parameter Values"
AMR
Voice Bearer Activity Voice Bearer Activity
should be completed for all services and at TU50
Shows All the Bearers Made Avaliable for UMTS Service.
Not a PS Service Not a PS Service
Power Activity Factor Resource Activity Factor Shows All the Bearers Made Avaliable for UMTS Service.
Not a PS Service Not a PS Service
Should be Conversational N/A for Voice N/A for Voice N/A for Voice N/A for Voice
Y
N/A for Voice N/A for Voice N/A for Voice N/A for Voice N/A for Voice N/A for Voice N/A for Voice N/A for Voice
GSM / UMTS
Master / Slave
Name for the Terminal Service Drop down for GSM / UMTS Copy of Master Terminal - Used for Scalling Traffic Feature.
Percantage of Traffic to be inside the building on the Specific Clutter. Importance of traffic distribution on that clutter.
Importance of traffic distribution on a particular Vector.
Internal Acceptance 21
Max TX Power of a Mobile
70
Max Allowed power reduction from the Max Mobile Power
-105 -14 -12
To review. Recommend -15
0.5 0 2 7
To be reviewed should be 9dB
3G Clutter Parameters Vendor Acceptance This is for Vendor Acceptance Only:
Clutter
Fading Indoor STDEV (dB)
Water Transportation Residential with trees Residential with Few Trees Open Marsh/Wetland High Density Urban/ Building Grass/Agriculture Forested/Dense vegetation Commercial/Industrial Airport
0 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2
Clutter
Fading Indoor STDEV (dB)
Water Transportation Residential with trees Residential with Few Trees Open Marsh/Wetland High Density Urban/ Building Grass/Agriculture Forested/Dense vegetation Commercial/Industrial Airport
0 8.2 10.3 10.3 8.2 8.2 11.4 8.2 8.2 10.6 10.6
Internal Acceptance This is for Internal Acceptance Only:
Fading Outdoor STDEV (dB)
Indoor Loss (dB)
0 0 0 0 0 0 0 0 0 0 0
0 6 6 6 6 6 6 6 6 6 6
Fading Outdoor STDEV (dB)
Indoor Loss (dB)
8 8 8 8 8 8 9 8 8 8 8
0 6 11 11 6 6 16 6 6 16 11
Tab Name Cell Params
Control Functions
Units
Vendor Acceptance
Carrier Assigned Carrier
Carrier 1
UMTS Parameters Noise Rise Limit
db
6
Orthogonality Factor
0.5
Pilot Power
dbm
Max TX Power
dbm
35.1 46
CCCH Powers relative to Pilot
No
P-CCPCH
dbm
33.1
S-CCPCH
dbm
35.1
P-SCH
dbm
32.1
S-SCH
dbm
32.1
AICH
dbm
29.1
PICH
dbm
29.1
HSDPA Link Power
dbm
37.7
Soft Handover Window
db
3
Noise Figure
db
3
Active Set Size
3 Value is determined after Scambling Code
Scrambling Code
planning is completed. Value is determined after Scambling Code
Scrambling Code Group
planning is completed. Value is determined after Scambling Code
Scrambling Code ID
planning is completed. True / False
Fixed Max TX Power Fixed UMTS Channel Power DL Splitter Loss Scrambling Code Planning Parameters
db
True / False Vendor Equipment Information
Value is determined after Scambling Code Number of codes in NBR cells
planning is completed. Value is determined after Scambling Code
Number of codes Groups in NBR Cells Static Analysis and Cell Loading
planning is completed.
Parameters Uplink Noise Rise
db
Down Link Traffic Power
dbm
Not to be used in the design Process
AMR 12.2
PS 64
CS Bearers (kbps) 12.2 CS user per cell 20 PS Capture Data (Mbytes/hour) Not Applicable Activity factor 60.0% Average rate (kbps) 7.3 Eb/No 2 Eb/No ratio 1.58 Relative Ratio 1 Equivalent data rate (voice) 146.4 Factor for i Reference Pole Capacity (kbps) Loading of Cell UL Noise Rise (Loading)
Thank you for interesting in our services. We are a non-profit group that run this website to share documents. We need your help to maintenance this website.