EnglTutorialMagnetShroom (1).pdf

Magnet-shroom Plants vs Zombies collection

Crochet pattern by Aradiya

1

Instruments and materials

1.25 mm hook Red, gray, purple, milk and light brown yarn Sewing needle Stuffing material A piece of wire A piece of black felt

Image 1

Magnet Shroom - character of the popular game "Plants vs Zombies", that was developed and released by PopCap Games.

To create a toy with a height of 10 cm you must crochet with single yarn using a 1.25 mm hook. The stuffing material used in this toy is polyester wadding. The piece of felt must be 1.5 mm thick.

This pattern is for personal use only. Sharing information from this pattern is prohibited.

2

Abbreviations Ch - chain Sl - slip stitch Sc - single crochet Dc - double crochet Tr - treble crochet HDc - half double crochet INC - increase INVDEC - invisible decrease Tr INVDEC - treble invisible decrease BLO - back loops only FLO - front loops only

All amigurumi toys are crocheted with tight stitches. Avoid small holes when stretching crochet fabric, if there are some tiny holes, use a smaller size hook. To avoid seams, all details are crocheted in a spiral without slip stitch and lifting loops. There is a chance that you will lose the beginning of the row; to avoid this, use a marker. It can be a colored pin or thread of contrasting color.

Tip 1 The toy must be crocheted with tight stitches, to be sure that there won't be any holes through which stuffing material can be seen.

Tip 2 To keep track of the beginning of the row, use a marker. Pin marker to the last loop of the row. Every new row must be finished with a loop at the marker.

3

Magnet With red yarn

Ch 11 1r. in second stitch Sc, 8Sc, ЗSc in next stitch (crochet round) 8Sc, 2Sc in next stitch that already has the very first single crochet. (22) Crochet in spiral  2r. INC, 8Sc, 3INC, 8Sc, 2INC (28)  3r. INC, 10Sc, 4INC, 10Sc, 3INC (36)                                                    Image 2  4r. Sc in each Sc around (36)  5r. 14Sc, 4INC, 14Sc, 4INC (44) 6r. Sc in each Sc around (44) 7r. 16Sc, 4INC, 18Sc, 4INC, 2Sc (52) 8r. Sc in each Sc around (52) 9r. 18Sc, 4INC, 22Sc, 4INC, 4Sc (60) 10r. Sc in each Sc around (60) 11r. 21Sc, 4INC, 26Sc, 4INC, 5Sc (68) 12-14r. Sc in each Sc around (68) 15r. 13Sc turn 16r. 7Sc turn 17r. 7Sc turn 18r. 7Sc turn 19r. 7Sc turn 20r. 7Sc turn Image 3 21r. 7Sc turn 22r. 7Sc turn   Rows 1 to 15 make the base. Rows 16 to 22 make the bend. Count 27Sc from both sides of the bend. There should be 7Sc left between them.

Image 4

4

Magnet

Now you must connect these 7Sc (situated on the base) to the 7Sc on the bend: crochet 7Sc, taking loops on the base and the bend of the magnet.

Image 5

Crochet 27Sc in the round on the right side of the base, and 7Sc into the transverse loops on the matching side of the bend.

Image 6

This is how you'll get the first circular row of the top right part of the magnet.

Image 7

5

Magnet

2-8r. Sc in each Sc around (34) Cut the yarn.

Image 8

Now, to start making the top left part of the magnet, you must connect red yarn to the back side of the magnet. Crochet 7Sc into the transverse loops on the bend, and 27Sc on the base of the magnet. The first row is ready.

Image 9

2-8r. Sc in each Sc around (34) Cut the yarn.

Image 10

6

Magnet

Connect gray yarn to the top right part of the magnet. 9-12r. Sc in each Sc around (34) 13r. 32Sc Stuff detail with stuffing material. 14r. BLO(Tr INVDEC, 6Sc, Tr INVDEC, 5Sc, Tr INVDEC, 6Sc, Tr INVDEC, 4Sc) 15r. Tr INVDEC, 4Sc, Tr INVDEC, 3Sc, Tr INVDEC, 4Sc, Tr INVDEC, 2Sc 16r. Tr INVDEC, 2Sc, Tr INVDEC, 1Sc, Tr INVDEC, 2Sc, Tr INVDEC 17r. 5 INVDEC, Sl

Image 11

Cut the yarn.

Connect gray yarn to the top left part of the magnet. 9-12r. Sc in each Sc around (34) 13r. 32Sc Stuff detail with stuffing material. 14r. BLO(Tr INVDEC, 5Sc, Tr INVDEC, 6Sc, Tr INVDEC, 5Sc, Tr INVDEC, 5Sc) 15r. Tr INVDEC, 3Sc, Tr INVDEC, 4Sc, Tr INVDEC, 3Sc, Tr INVDEC, 3Sc 16r. Tr INVDEC, 1Sc, Tr INVDEC, 2Sc, Tr INVDEC, 1Sc, Tr INVDEC 17r. 5 INVDEC, Sl

Image 12

Image 13

Cut the yarn.

Tighten the loops. Cut the yarn, hiding the end inside the body.

Image 14

7

Shroom

With purple yarn 1r. 6 Sc in magic circle (6)  2r. 6 INC (12)  3r. (1Sc, INC) repeat 6 times (18)                                                     4r. (2Sc, INC) repeat 6 times (24) 5r. (3Sc, INC) repeat 6 times (30) 6r. (4Sc, INC) repeat 6 times (36) 7r. (5Sc, INC) repeat 6 times (42) 8r. (6Sc, INC) repeat 6 times (48) Image 15 9r. (7Sc, INC) repeat 6 times (54)  10-12r. Sc in each Sc around (54) 13r. INVDEC repeat 27 times (27) 14r. (2Sc, INVDEC) repeat 6 times, 3Sc  (21) 15r. (1Sc, INVDEC) repeat 7 times  (14)  

Stuff detail with stuffing material, continue crocheting.

Image 16

Image 18

Image 17

8

Shroom

Connect milk yarn and cut purple one.

Image 19

15r. FLO Sc in each Sc around (14) 16-22r. Sc in each Sc around (14)

Image 20

Connect light brown yarn and cut milk one. 23r. FLO(3INC, Sc, 3INC, Sc, 3INC, Sc, INC, Sc) (24) 24r. Sc in each Sc around (24) 25r. (3Sc, INC) repeat 6 times (30) 26r. (4Sc, INC) repeat 6 times (36) 27r. (5Sc, INC) repeat 6 times (42) 28r. (6Sc, INC) repeat 6 times (48) 29r. (7Sc, INC) repeat 6 times (54), Sl Image 21

Fasten and cut the yarn.

Image 22

9

Stand

With light brown yarn

1r. 6 Sc in magic circle (6)  2r. 6 INC (12)  3r. (1Sc, INC) repeat 6 times  4r. (2Sc, INC) repeat 6 times 5r. (3Sc, INC) repeat 6 times 6r. (4Sc, INC) repeat 6 times 7r. (5Sc, INC) repeat 6 times 8r. (6Sc, INC) repeat 6 times 9r. (7Sc, INC) repeat 6 times   Do not cut the yarn.

(18)                                                    (24) (30) (36) (42) (48) (54), Sl Image23

All details are ready, and we are ready to assemble!

Assembly Sew the magnet onto the top of the shroom, thrusting the needle back and forth through the shroom, so as to tighten the shape of the shroom. Fix and cut the yarn. Hide its end inside detail. Stuff the stem of the shroom with stuffing material.

Image 24

Image 26

Image 25

10

Assembly

Take some soft wire, fold it a few times and curl it up to make it more rigid. Make a ring stand, cut excess wire. Image 27

With the end of yarn that we left before on the light brown stand, start crocheting a row of slip stitches, in order to connect the stand to the base of the shroom. Capture back loops only on the light brown stand and front loops only on the base of the shroom.

Image 28

When you have crocheted a few slip stitches, insert the ring stand. Continue connecting.

Image 29

Hide the end of yarn inside detail.

Image 30

11

Assembly

Magnet-shroom is almost done. The last things are the eyes and eyebrows.

Image 31

Image 32

Cut two similar eyes out of black felt. Put them symmetrically, a bit lower than the bend of the magnet, and sew them with white thread, making a few stitches to embroider the pupils. Image 33

Image 34

Image 35

12

Assembly

We're done with eyes. Proceed to eyebrows.

Image 36

Eyebrows must be sewn with gray yarn, using a needle to make back stitches.

Image 37

If the toy is meant to be a souvenir, you can cut the yarn in the middle of each stitch. This will make the eyebrows look fluffy. But be careful, they can be easily removed if you pull them.

Image 38

13

Assembly

Congratulations, your Magnet-shroom is ready!

Image 40

Image 41

Image 39

Image 42

If you enjoyed this pattern, subscribe for more!

@aradiya_

|

/AradiyaToys /AradiyaToys @AradiyaToys

#AradiyaToys