EN ISO 12944-5_1998_inloc DIN 55928-5

July 1998

D EUTSCHE NORM

Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems (ISO 12944-5 : 1998) English version of DIN EN ISO 12944-5

ICS 87.020; 91.080.10

{ EN ISO 12944-5 Supersedes DIN 55928-5, May 1991 edition.

Descriptors: Paint coatings, corrosion protection, structural steelwork. Beschichtungsstoffe – Korrosionsschutz von Stahlbauten durch Beschichtungssysteme – Teil 5: Beschichtungssysteme (ISO 12944-5 : 1998)

European Standard EN ISO 12944-5 : 1998 has the status of a DIN Standard.

National foreword This standard has been published in accordance with a decision taken by CEN/TC 139 to adopt, without alteration, International Standard ISO 12944-5 as a European Standard. The responsible German body involved in its preparation was the Normenausschuß Anstrichstoffe und ähnliche Beschichtungsstoffe (Paints and Varnishes Standards Committee), Technical Committee Korrosionsschutz von Stahlbauten. The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as follows: ISO Standard DIN Standard ISO 2808 ISO 3549 ISO 4628-1 ISO 4628-2 ISO 4628-3 ISO 4628-4 ISO 4628-5 ISO 4628-6 ISO 8503-2 ISO 12944-1 ISO 12944-2 ISO 12944-4 ISO 12944-6

DIN ISO 2808 *) DIN ISO 3549 *) DIN ISO 4628-1 *) DIN ISO 4628-2 *) DIN ISO 4628-3 *) DIN ISO 4628-4 DIN ISO 4628-5 DIN ISO 4628-6 *) DIN EN ISO 8503-2 DIN EN ISO 12944-1 DIN EN ISO 12944-2 DIN EN ISO 12944-4 DIN EN ISO 12944-6

*) At present at the stage of draft.

Continued overleaf. EN comprises 29 pages.

© No part of this standard may be reproduced without the prior permission of Ref. DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).

No. DIN EN ISO 12944-5 : 1998-07 English price group 13

Sales No. 1113 12.98

Page 2 DIN EN ISO 12944-5 : 1998-07 Amendments DIN 55928-5, May 1991 edition, has been superseded by the specifications of EN ISO 12944-5, which is identical to ISO 12944-5. Previous edition DIN 55928: 1956-11, 1959-06x; DIN 55928-5: 1980-03, 1991-05.

National Annex NA Standards referred to (and not included in Normative references and Annex ZA) DIN EN ISO 8503-2

DIN EN ISO 12944-1 DIN EN ISO 12944-2 DIN EN ISO 12944-4 DIN EN ISO 12944-6

Surface roughness characteristics of blast-cleaned steel substrates – Method for the grading of surface profile of abrasive blast-cleaned substrates using a comparator (ISO 8503-2 : 1988) Corrosion protection of steel structures by protective paint systems – Part 1: General introduction (ISO 12944-1 : 1998) Corrosion protection of steel structures by protective paint systems – Part 2: Classification of environments (ISO 12944-2 : 1998) Corrosion protection of steel structures by protective paint systems – Part 4: Types of surface and surface preparation (ISO 12944-4 : 1998) Corrosion protection of steel structures by protective paint systems – Part 6: Laboratory performance test methods (ISO 12944-6 : 1998)

EN ISO 12944-5 May 1998

ICS 87.020; 91.080.10 Descriptors: Paint coatings, corrosion protection, structural steelwork.

English version Paints and varnishes

Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems (ISO 12944-5 : 1998) Peintures et vernis – Anticorrosion des structures en acier par systèmes de peinture – Partie 5: Systèmes de peinture (ISO 12944-5 : 1998)

Beschichtungsstoffe – Korrosionsschutz von Stahlbauten durch Beschichtungssysteme – Teil 5: Beschichtungssysteme (ISO 12944-5 : 1998)

This European Standard was approved by CEN on 1997-11-13. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels

© 1998. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.

Ref. No. EN ISO 12944-5 : 1998 E

Page 2 EN ISO 12944-5 : 1998

Foreword International Standard ISO 12944-5 : 1998 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 5: Protective paint systems, which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization, has been adopted by Technical Committee CEN/TC 139 ‘Paints and varnishes’, the Secretariat of which is held by DIN, as a European Standard. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by November 1998 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

Endorsement notice The text of the International Standard ISO 12944-5 : 1998 was approved by CEN as a European Standard without any modification. NOTE: Normative references to international publications are listed in Annex ZA (normative).

4 4 5 7 9

13 25 28

Page 3 EN ISO 12944-5 : 1998

Page 4 EN ISO 12944-5 : 1998

Page 5 EN ISO 12944-5 : 1998

Page 6 EN ISO 12944-5 : 1998

Page 7 EN ISO 12944-5 : 1998

Page 8 EN ISO 12944-5 : 1998

Page 9 EN ISO 12944-5 : 1998

Page 10 EN ISO 12944-5 : 1998

Page 11 EN ISO 12944-5 : 1998

Page 12 EN ISO 12944-5 : 1998

Page 13 EN ISO 12944-5 : 1998

Page 14 EN ISO 12944-5 : 1998

Page 15 EN ISO 12944-5 : 1998

Page 16 EN ISO 12944-5 : 1998

Page 17 EN ISO 12944-5 : 1998

Page 18 EN ISO 12944-5 : 1998

Page 19 EN ISO 12944-5 : 1998

Page 20 EN ISO 12944-5 : 1998

Page 21 EN ISO 12944-5 : 1998

Page 22 EN ISO 12944-5 : 1998

Page 23 EN ISO 12944-5 : 1998

Page 24 EN ISO 12944-5 : 1998

Page 25 EN ISO 12944-5 : 1998

Page 26 EN ISO 12944-5 : 1998

Page 27 EN ISO 12944-5 : 1998

Page 28 EN ISO 12944-5 : 1998

Page 29 EN ISO 12944-5 : 1998