EN 10305-1.pdf
Short Description
Download EN 10305-1.pdf...
Description
February 2003
D EUTSCHE NORM
Steel tubes for precision applications – Technical delivery conditions
{
Part 1: Seamless cold drawn tubes English version of DIN EN 10305-1
EN 10305-1
ICS 77.140.75 Präzisionsstahlrohre – Technische Lieferbedingungen – Teil 1: Nahtlose kaltgezogene Rohre
Supersedes DIN 2391-1 and DIN 2391-2, September 1994 editions.
European Standard EN 10305-1 : 2002 has the status of a DIN Standard. A comma is used as the decimal marker.
National foreword This standard has been prepared by ECISS/TC 29. The responsible German body involved in the preparation of this standard was the Normenausschuss Eisen und Stahl (Steel and Iron Standards Committee), Technical Committee Präzisionsstahlrohre. DIN V 17006-100 is the standard corresponding to CEN Technical Report CR 10260 referred to in clause 2 of the EN. Amendments DIN 2391-1 and DIN 2391-2, September 1994 editions, have been superseded by the specifications of EN 10305-1. Previous editions DIN 2385: 1993-12; DIN 2385-1: 1940-6, 1943-12, 1957-07; DIN 2391: 1932-04; DIN 2391-1: 1940-06, 1957-11, 1965-11, 1981-07, 1994-09; DIN 2391-2: 1940-06, 1957-11, 1967-07, 1981-07, 1994-09.
National Annex NA Standard referred to (and not included in Normative references and Bibliography) DIN V 17006-100
Designation systems for steel – Additional symbols for steel names
Continued overleaf. EN comprises 26 pages.
© No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen).
Ref. No. DIN EN 10305-1 : 2003-02 English price group 13
Sales No. 1113 04.03
EN 10305-1 November 2002 --`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
ICS 77.140.75
English version
Steel tubes for precision applications – Technical delivery conditions Part 1: Seamless cold drawn tubes Tubes de précision en acier – Conditions techniques de livraison – Partie 1: Tubes sans soudure étirés à froid
Präzisionsstahlrohre – Technische Lieferbedingungen – Teil 1: Nahtlose kaltgezogene Rohre
This European Standard was approved by CEN on 2002-10-02. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Management Centre: rue de Stassart 36, B-1050 Brussels
© 2002. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.
Ref. No. EN 10305-1 : 2002 E
Page 2 EN 10305-1 : 2002
3 4 4 5 5 5 5 5 6 6 6 7 7 --`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
7 7 8 8 8 9 10 11 16 16 16 17 18 18 18 18 18 19 19 19 20 20 20
Page 3 EN 10305-1 : 2002
20 20 20 21 25 26
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 4 EN 10305-1 : 2002
Page 5 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 6 EN 10305-1 : 2002
Page 7 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 8 EN 10305-1 : 2002
Page 9 EN 10305-1 : 2002
Page 10 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 11 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 12 EN 10305-1 : 2002
Page 13 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 14 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 15 EN 10305-1 : 2002
Page 16 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 17 EN 10305-1 : 2002 --`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 18 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 19 EN 10305-1 : 2002
Page 20 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 21 EN 10305-1 : 2002
Page 22 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 23 EN 10305-1 : 2002
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 24 EN 10305-1 : 2002
Page 25 EN 10305-1 : 2002 --`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---
Page 26 EN 10305-1 : 2002
View more...
Comments
