EN 10283

December 1998

D EUTSCHE NORM

Corrosion-resistant steel castings

{

English version of DIN EN 10283

EN 10283

ICS 77.140.20; 77.140.80 Descriptors: Steel, castings, testing. Korrosionsbeständiger Stahlguß

This standard, together with DIN EN 10213-1 and DIN EN 10213-4, January 1996 editions, supersedes DIN 17445, November 1984 edition.

European Standard EN 10283 : 1998 has the status of a DIN Standard. A comma is used as the decimal marker.

National foreword This standard has been prepared by ECISS/TC 31. The responsible German body involved in its preparation was the Normenausschuß Eisen und Stahl (Steel and Iron Standards Committee), Technical Committee Stahlguß. DIN V 17006-100 is the standard corresponding to the document CR 10260 referred to in clause 2 of the EN. Amendments DIN 17445, November 1984 edition, has been superseded by the specifications of EN 10283. Previous editions DIN 17445: 1969-02, 1984-11.

National Annex NA Standard referred to (and not included in Normative references) DIN V 17006-100 Designation systems for steel – Additional symbols for steel names

EN comprises 14 pages.

© No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).

Ref. No. DIN EN 10283 : 1998-12 English price group 08

Sales No. 1108 06.99

EN 10283 September 1998

ICS 77.140.20; 77.140.80 Descriptors: Steel, castings, testing.

English version

Corrosion-resistant steel castings Aciers moulés résistant à la corrosion

Korrosionsbeständiger Stahlguß

This European Standard was approved by CEN on 1998-09-04. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels

© 1998. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.

Ref. No. EN 10283 : 1998 E

Page 2 EN 10283 : 1998

2 3 3 3 4 4 4 4 4 9 9 9 9 9 10 10 11 11 11 11 11 11 12 12 12 12 12 12 12 13 14

Foreword This European Standard has been prepared by the Technical Committee ECISS/TC 31 “Steel castings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 1999, and conflicting national standards shall be withdrawn at the latest by March 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

Page 3 EN 10283 : 1998

Page 4 EN 10283 : 1998

Page 5 EN 10283 : 1998

Page 6 EN 10283 : 1998

Page 7 EN 10283 : 1998

Page 8 EN 10283 : 1998

Page 9 EN 10283 : 1998

Page 10 EN 10283 : 1998

Page 11 EN 10283 : 1998

Page 12 EN 10283 : 1998

Page 13 EN 10283 : 1998

Page 14 EN 10283 : 1998