EN 10217-1

April 2005

D EUTSCHE NORM

{

DIN EN 10217-1

Supersedes August 2002 edition.

ICS 23.040.10; 77.140.75

Welded steel tubes for pressure purposes – Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties (includes Amendment A1:2005) English version of DIN EN 10217-1:2002 + A1:2005

Geschweißte Stahlrohre für Druckbeanspruchungen – Technische Lieferbedingungen – Teil 1: Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei Raumtemperatur (enthält Änderung A1:2005)

A comma is used as the decimal marker.

National foreword

--`,,``,`-`-`,,`,,`,`,,`---

This standard has been prepared by ECISS/TC 29 ‘Steel tubes and fittings for steel tubes’ (Secretariat: Italy). The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steel and Iron Standards Committee), Technical Committee Rohre aus allgemeinen Baustählen oder Feinkornbaustählen. DIN V 17006-100 is the standard corresponding to CEN Technical Report CR 10260 referred to in clause 2 of the EN. Amendments This standard differs from the August 2002 edition in that more detailed specifications regarding inspection have been given and Annex ZA has been revised. Previous editions DIN 1626: 1952x-12, 1984-10; DIN 1626-1: 1965-01; DIN 1626-3: 1965-01; DIN 1626-4: 1965-01; DIN 1628: 1984-10; DIN EN 10217-1: 2002-08.

National Annex NA Standard referred to (and not included in Normative references and Bibliography) DIN V 17006-100

Designation systems for steel – Additional symbols for steel names

Continued overleaf. Document comprises 39 pages.

© No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, for German Standards (DIN-Normen).

Copyright Deutsches Institut Fur Normung E.V. has the exclusive right of sale Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

English price group 17 www.din.de www.beuth.de

06.05

9637698

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

EN 10217-1 May 2002 + A1 January 2005

ICS 23.040.10; 77.140.75

Supersedes EN 10217-1:2002.

English version

Welded steel tubes for pressure purposes – Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties (includes Amendment A1:2005) Tubes soudés en acier pour service sous pression – Conditions techniques de livraison – Partie 1: Tubes en acier non allié avec caractéristiques spécifiées à température ambiante (amendement A1:2005 inclus)

Geschweißte Stahlrohre für Druckbeanspruchungen – Technische Lieferbedingungen – Teil 1: Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei Raumtemperatur (enthält Änderung A1:2005)

This European Standard was approved by CEN on 2002-04-25 and Amendment A1 on 2004-12-09. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.

ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Management Centre: 36, rue de Stassart, B-1050 Brussels

© 2005. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members. --`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Ref. No. EN 10217-1:2002 + A1:2005 E

Page 2 EN 10217-1:2002 + A1:2005

Contents

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

--`,,``,`-`-`,,`,,`,`,,`---

Page

Foreword to EN 10217-1:2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Foreword to EN 10217-1:2002/A1:2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Terms and definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Classification and designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5.1 Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5.2 Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 Information to be supplied by the purchaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6.1 Mandatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6.2 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6.3 Example of an order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 Manufacturing process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7.1 Steelmaking process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7.2 Deoxidation process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7.3 Tube manufacture and delivery conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 8 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 8.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 8.2 Chemical composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 8.3 Mechanical properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 8.4 Appearance and internal soundness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 8.5 Straightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 8.6 Preparation of ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 8.7 Dimensions, masses and tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 9 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9.1 Types of inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9.2 Inspection documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9.3 Summary of inspection and testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 10 Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 10.1 Frequency of tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 10.2 Preparation of samples and test pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 11 Test methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.1 Chemical analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.2 Tensile test on base material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.3 Transverse tensile test on the weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.4 Flattening test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 11.5 Drift expanding test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 11.6 Weld bend test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 11.7 Impact test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 11.8 Leak-tightness test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 11.9 Dimensional inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 11.10 Visual examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 11.11 Non-destructive testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 11.12 Retest, sorting and reprocessing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 12 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 12.1 Marking to be applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 12.2 Additional marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 13 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Annex A (normative) Qualification of welding procedure for SAW tube production . . . . . . . . . . . . . . 30 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of 97/23/EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Page 3 EN 10217-1:2002 + A1:2005

Foreword to EN 10217-1:2002

Foreword to EN 10217-1:2002/A1:2005 This amendment to EN 10217-1:2002 has been prepared by Technical Committee ECISS/TC 29 ‘Steel tubes and fittings for steel tubes’, the Secretariat of which is held by UNI. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the relevant EU Directive. For relationship with this directive, see Annex ZA. This amendment shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by July 2005 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

--`,,``,`-`-`,,`,,`,`,,`---

This European Standard has been prepared by Technical Committee ECISS/TC 29 ‘Steel tubes and fittings for steel tubes’, the Secretariat of which is held by UNI. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the relevant EU Directive. For relationship with this directive, see Annex ZA. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by November 2002 at the latest. Other parts of EN 10217 are: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties Part 3: Alloy fine grain steel tubes Part 4: Electric welded non-alloy steel tubes with specified low temperature properties Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties Part 7: Stainless steel tubes Another European Standard series covering tubes for pressure purposes is: EN 10216 Seamless steel tubes for pressure purposes. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

Page 4 EN 10217-1:2002 + A1:2005

1

Scope

2

Normative references

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 5 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

3

Terms and definitions

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 6 EN 10217-1:2002 + A1:2005

4

Symbols

5

Classification and designation

6

Information to be supplied by the purchaser

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 7 EN 10217-1:2002 + A1:2005

7

Manufacturing process

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 8 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

--`,,``,`-`-`,,`,,`,`,,`---

Page 9 EN 10217-1:2002 + A1:2005

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

--`,,``,`-`-`,,`,,`,`,,`---

Page 10 EN 10217-1:2002 + A1:2005

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 11 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 12 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 13 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 14 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 15 EN 10217-1:2002 + A1:2005

Dimensions in mm

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 16 EN 10217-1:2002 + A1:2005 Table 5 (concluded) Dimensions in mm

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 17 EN 10217-1:2002 + A1:2005

Dimension in mm

--`,,``,`-`-`,,`,,`,`,,`---

Dimensions in mm

Dimensions in mm

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 18 EN 10217-1:2002 + A1:2005

Dimensions in mm

Dimensions in mm

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

--`,,``,`-`-`,,`,,`,`,,`---

Page 19 EN 10217-1:2002 + A1:2005

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 20 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 21 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 22 EN 10217-1:2002 + A1:2005

Sampling

--`,,``,`-`-`,,`,,`,`,,`---

10

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 23 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

--`,,``,`-`-`,,`,,`,`,,`---

Page 24 EN 10217-1:2002 + A1:2005

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 25 EN 10217-1:2002 + A1:2005

11

Test methods

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 26 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 27 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 28 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

12

Marking

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 29 EN 10217-1:2002 + A1:2005

13

Protection

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 30 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

--`,,``,`-`-`,,`,,`,`,,`---

Page 31 EN 10217-1:2002 + A1:2005

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 32 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 33 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 34 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

--`,,``,`-`-`,,`,,`,`,,`---

Page 35 EN 10217-1:2002 + A1:2005

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Page 36 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

Dimensions in mm

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale

--`,,``,`-`-`,,`,,`,`,,`---

Page 37 EN 10217-1:2002 + A1:2005

Page 38 EN 10217-1:2002 + A1:2005

--`,,``,`-`-`,,`,,`,`,,`---

Copyright Deutsches Institut Fur Normung E.V. Provided by IHS under license with DIN No reproduction or networking permitted without license from IHS

Not for Resale