Electrical System

May 17, 2018 | Author: Mauricio Garcia | Category: Battery (Electricity), Vehicle Technology, Manufactured Goods, Components, Vehicles
Share Embed Donate


Short Description

Download Electrical System...

Description

Electrical System

Стр. 1 из 3

Electr ical System (018-021)

Specifications Marine Applications Starting Motor Circuit: Maximum resistance: 12-VDC.................... 0.00075 ohm 24-VDC.................... 0.002 ohm Starting Motor Circuit: Maximu m Volt age Drop: 12-VDC.................... 1.95-VDC 24-VDC.................... 1.7-VDC Marine Applic ations Unaided Cold Start: Maximum Ambient Temperature.................... -7°C [19°F] Minimum Cranking Speed Required.................... 120 rpm Industria l Applications Starting Motor Circuit: Maximum resistance: 12-VDC....................0.00075 ohm 24-VDC....................0.002 ohm Starting Motor Circuit: Maximu m Volt age Drop: 12-VDC....................1.95-VDC 24-VDC....................1.7-VDC Industria l Applications Unaided Cold Start: Maximum Ambient Temperature....................-12°C [10°F] Minimum Cranking Speed Required....................120 rpm Generator Drive Applic ations Minimum Ambient Temperature for Cold Start With Coolant Heated to Rated Speed....................-14°C [7°F] Minimum Ambient Temperature for Unaided Cold Start to Low Idle Speed....................-4°C [25°F] Minimum Ambient Temperature for NFPA 110 Cold Start (90°F minimum coolant temperature)....................0°C [32°F] Minimum recommended battery capacity:

17:35:01

06.05.2009

Electrical System

Стр. 2 из 3

Ambi ent Temperatur e System Voltage

-18°C [0°F]

Cold Cold Cranking ReserveCapacity 1Minutes Cranking ReserveCapacity 1Minutes Am peres Am peres

12-VDC 1800 24VDC2

0°C [32°F]

640

900

1280 320

480

640

240

The number of plates within a given battery size determines reserve capacity. Reserve capacity determines the length of time that sustained cranking can occur.Cold Cranking Amperes rating are based on two 12-VDC batteries in series. For automotive applications a minimum of 9-VDC at the power connector is required to power up to the ECM. For Industrial, Power Generation, and Marine Applications a minimum of 6.5-VDC at the power connector is required to power up the ECM.

Batteries (Specific Gravity)

Specific Gravity at 27°C [81°F]

State of Charge

1.260 to 1.280

100%

1.230 to 1.250

75%

1.200 to 1.220

50%

1.170 to 1.190 1.110 to 1.130

25% Discharged

Maximum Resistance of Starting Motor Circuit 12-VDC Starting Motor (Ohm) 0.00001 24-VDC Starting Motor (Ohm) 0.00020 Cable resistances can be obtained in the accompanying Battery Cable Resistance Chart. If the frame is in ground circit the frame length must be considered cable of the same size as that

17:35:01

06.05.2009

Electrical System

Стр. 3 из 3

used in the balance of the system.

Item

Resistance Ohms

Connection

0.00001

Additional Contacter (SeriesParellel Switch, Relays, etd.)

0.00020

Last Modifi ed: 06-Feb-2009 Feedback / Help Copyright © 2000-2009 Cummins Inc. All rights reserved.

17:35:01

06.05.2009

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF