Notes: 1. When using the Precision Resistance Bridge: a. Make sure you’re measuring resistance not something else b. There is a button just under the two metal jaws. That button will open the metal jaws. Use it. Pre-Lab: Section A
LABORATORY EXPT – CIRCUIT CONSTRUCTION Things to know:
Soldering
(Appendix 8)
Things to bring:
Your entire Lab kit (PCB, Resistors, LED’s, etc.)
Notes: 1. You can build and test your LED circuit on your breadboard instead of soldering it all together 2. Make sure your LED’s are the correct way around Pre-Lab: Assemble the amplifier and tape down the components so they don’t fall out during transport. You can solder at home if you have a soldering iron.
S1 - 2012
ELEC1111
LABORATORY EXPT – VOLTAGE SOURCES AND NODE EQUATIONS Things to know:
V=IR Kirchhoff’s Laws Node voltage equations
Things to bring:
Prototyping board 9V Battery
Notes: 1. Your battery will drop in voltage as it is used Pre-Lab: Section A
- i) Load current:
Power dissipated: Power delivered: Power delivered equals power dissipated? Yes - ii) Terminal Voltage: 8.3 A Current flowing:
Breadboard LED set Something that can count seconds
Notes: 1. The capacitor won’t be destroyed if it’s non-polarized. 2. You don’t have to do Part C if you don’t want to. However you can get bonus Lab marks which may help cover marks you lost in other labs Pre-Lab: None
S1 - 2012
ELEC1111
LABORATORY EXPT – RADIO CONTROLLED CAR Things to know:
AM, FM, PWM and PPM signals
Things to bring:
Yourself and the Lab book
Notes: 1. The radio uses PPM except the oscilloscope will show them as voltage drops Pre-Lab:
You may want to exaggerate the amount of amplitude and frequency modulation. PWM
PPM
S1 - 2012
ELEC1111
LABORATORY EXPT – POWER AND ENERGY Things to know:
P=IV
Things to bring:
3 different colored pens
Notes: N/A Pre-Lab: Result h) Type
Power
Light Output
Incandescent Compact Florescent Compact Florescent Quartz halogen LED
LABORATORY EXPT – FEEDBACK CONTROL Things to know:
Read the information given
Things to bring:
Your best reaction skills and maybe something that you can use to count seconds
Notes: 1. You can hit pause to draw the graph 2. If you hit pause more than once in the application you may need to click run more than once Pre-Lab: None
S1 - 2012
ELEC1111
LABORATORY EXPT – AM RADIO RECIEVER, CRYSTAL SET Things to know:
How a radio works
Things to bring:
Headphones or the provided headphone in your lab kit
Notes: 1. For the last question asking how many stations you can get you can just write 0 Pre-Lab:
AM – Amplitude modulation alters and encodes the signal in the varying amplitude of a frequency-constant wave FM – Frequency modulation alters and encodes the signal in the varying frequency of a amplitude-constant wave
LABORATORY EXPT – A/D & D/A CONVERSION Things to know:
What sampling is w.r.t. A/D and D/A conversions
Things to bring:
Headphones or the provided headphone in your lab kit
Notes: 1. Do the Prelim reading before the lab, there’s a lot to read 2. Make sure the equipment is wired properly and the wires are as short as possible. Long wires will cause problems. Pre-Lab: None
S1 - 2012
ELEC1111
LABORATORY EXPT – INTRODUCTION TO DIGITAL LOGIC Things to know:
Logic Gates NOT, AND, OR, NAND, NOR, XOR Truth tables
Thank you for interesting in our services. We are a non-profit group that run this website to share documents. We need your help to maintenance this website.