eetop.cn_RHEL 6°²×°Cadence ic616ºÍMMSIM13

6 RHEL Cadence installed IC 616 and MMSIM 13

20140817

First, preparation ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃ ### ### install the appropriate software support packages, these libraries are installed cadence environment configuration. (Root User) yum install ksh - Y yum install libXext. So6-y yum install libXtst. So6-y yum install libXt. So6-y yum install libGLU. So1- setopt = protected the multilib=false yum install libelf.so.1-y yum install libXrender. So1-y yum install libXp. So6-y yum install libXrandr. So2-y yum install xorg * * -y yum install libXp - Y yum install libXext. So6-y yum install LD-Linux.so.2-y yum install openmotif - Y yum install libstdc++ .so5-y 1 to establish link (This Document #: starts with the command for the root user of the command, $: starts with the command as an ordinary user, the command) #: ln -s /usr/bin/awk/bin/awk #: ln -s /usr/lib/libstdc++ - 3-libc 6.2 - 2 - 2.10 0.So /usr/lib/libstdc++ -libc 6.1-1. So 2 #: ln -s /usr/bin/Firefox /usr/bin/Netscape RHEL 6 does not uncompress command and compress command (whereis uncompress) by the following methods to establish a, enable root user, use gunzip: #: ln -s /bin/gunzip/bin/uncompress 4, a tmp folder (the root user) : mkdir /usr/tmp #: chown tqb/usr/tmp (chown: Modify the file and folder of the user with the means to establish the /usr/tmp file is changed to host computer tqb. tqb is my the host name of the computer, and each computer may be different from their own, into its own host name. Note IC 616 does not support the

default host name localhost and needs to be changed. Change the host name modify the /etc/sysconfig/network and specify the host name HOSTNAME = tqb, then execute the command hostname tqb) #: chmod 755 /usr/tmp (chmod settings/usr/tmp properties, this line means to set up /usr/tmp as owner of the file can be tqb can read and write to the same user group permissions to read the other user privileges to read) 6 back to also address, to make their host do cadence server. In the /etc/hosts file for the add line: 127.00.1host name such as 127.00.1tqb (uname -a View the host name) 7, restart sessions system => Shutdown => Restart or terminal, enter reboot ####### ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ 2, 616 IC installation #＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃ ### ### ### ### ### begin the installation Cadence here Cadence installed to /home/tqb/cadence, followed as an example (tqb is my host name of the computer, each computer may be different, to be replaced by its own host name, and the same, and no longer description) 1, Install Directory (To Install 616 IC for example) in the Terminal, in turn, execute the following command mkdir /home/tqb/cadence mkdir /home/tqb/cadence/IC 616 mkdir /home/tqb/cadence/installscape mkdir /home/tqb/cadence/mmsim 13 # the above line means to establish cadence installation path, and in the bottom, set up a folder IC 616, installscape mmsim , 13 to install the appropriate file to use chmod - R 777 /home/tqb/cadence #this line means to the cadence and all of its sub-file permissions set to highest privilege, are readable and writable executable 2, the IC 616, first install Hotfix, Base) Access to IC 616 Installation Source Path ( /home/tqb/software/cadence 616/IC 616, full), find the IC .,501 06.14 - 614 The lnx 86. Hotfix, enter CDROM 1, then go to to find the SETUP . SH, double-click to open, select Run on a terminal (or enter CDROM 1, enter $./SETUP .

SH) then: 1) ...

. Cadence Design Systems, Inc . 555 River Oaks Parkway San Jose, 95,134 California USA - More press ENTER, the prompt: 2) : Located CDROM at /media/software/cadence/IC 616/IC .,501 06.14 - 614 the lnx 86. Hotfix/CDROM Specify 1 path of install directory (OR type (RETURN' to exit: - Enter IC 616 installation path: /home/tqb/cadence/IC 616 3): The next check your installed InstallScape, answer n Next, we asked whether you install InstallScape, answer y then enter InstallScape Installation Path: /home/ tqb/cadence/installscape (IC .,501 06.14 - 614 The lnx 86. Hotfix/CDROM 1 of the iscape version IScape 04.11 - S 004 lnx 86. t. Z) 1: pop-up installation interface, installscape version 4.1.

2: interface, select Local Directory/Media Install select the installation file path cadence/IC 616/IC .,501 06.14 - 614 The lnx 86. Hotfix/CDROM 1 according to their respective conditions. Note that the last is the CDROM 1.

3: Choose the right path, click Continue, and select All, click Next, and then select all the you want to install the package, select the location to the front of the new cadence/IC 616 folder. /home/tqb/cadence/IC 616. And

4: Click Start start the installation. Install a stop, and jumped out of the interface, because the installation needs to be IC610 The lnx 86. Base's support.

Select the IC610 The lnx 86. Base, points of entry CDROM 1, that path is behind .... /IC610 The lnx 86. Base/CDROM 1, click OK to complete the installation.

6: IC 616 patches (in the installation package and patch skf for a 64-bit dedicated, open a terminal and enter the su and password, as follows, to enter root mode. tqb @tqb: ~$ Su Password: root@tqb tqb ]# to enter IC 616 - Patch folder. The cadence and patc.sh and sfk, cadence, Pat copied to /home/tqb/cadence/IC 616 installation directory. You can manually copy, or you can use the following command CP cadence and Patch/home/tqb/cadence/IC 616 CP sfk/home/tqb/cadence/IC 616 And then the cadence/IC 616 installation path CD /home/tqb/cadence/IC 616 Enter the command: ls to see if there are already cadence and patch.sh The sfk root (if the tqb permissions the next run will be the 3 errors) to continue to enter the command

#: . /cadence and Patch/home/tqb/cadence/IC 616

Wait for the patches from the terminal, enter exit to exit root mode If you encounter. eerror: failed to Read + Write: /home/tqb/cadence/IC 616/sfk - skipping do not have to bother about, this is just reports that it is unable to write your own 7: cdsinit modify your copy 616 IC/Tools/dfII/samples/local /home/tqb/cadence//IC 616/Tools/dfII/samples folder to 616 IC/Tools/dfII/directory and modify the file name cdsinit .cdsinit command (also available graphics interface, please note for your own path: CP -r /home/tqb/cadence/IC 616/Tools/dfII/samples/local/home/tqb/cadence/IC 616/Tools/dfII/ mV/home/tqb/cadence/IC 616/Tools/dfII/local/cdsinit /home/tqb/cadence/IC 616/Tools/dfII/local/ .cdsinit 8: Install License The licence folder under the license.dat file to copy/share/license/folder, and modify license.dat file hostname to tqb (see hostname command hostname) Modified in the previous two Acts: SERVER tqb ANY 5280 DAEMON cdslmd $CDS _ ROOT/Tools/bin/cdslmd Note: localhost is your machine name, and if you are unsure what you can in the terminal enter uname -a $: uname -a

You can see: localhost. dominate the localhost as the host name. However, IC 616 does not support the default host name localhost, you need to make changes, the changes in the document. ####### ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃ 3, install mmsim 13 ####### ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃ 13 mmsim installation with IC 616 many similarities. Install mmsim 13 before installing the following libraries, the root user yum install -y GCC gcc-C++ ksh csh libXp * xorg - X 11 - fonts * compat-libstdc++ -33. I 686 yum install -y alliance - alliance libs glibc - 2.12 - 1.107.EL 6. I686 glibc-devel.I686 glibc yum install -y compat-readline 5 - 5.2 - 17.1.EL 6. I 686 yum install -y xterm - 253 - 1 (Hint: No xterm package - 253 - 1 available. Ignore the prompt) Establish a library link Created linked libraries (only with Linux 64-bit) su CD /lib64 ln -s libreadline.so.6 libreadline.so.5 CD /usr/lib64 ln -s libhistory.so.6libhistory.so.5 To enter 13 mmsim installation source for the following path /home/tqb/software/MMSIM 13.1/MMSIM .,066 13.10 The lnx 86. Base/CDROM 1, find the SETUP SH . To change properties for the program, and then double-click to open, select Run on a terminal (or . /SETUP . SH) in sequence: 1) : ... Cadence Design Systems, Inc . 555 River Oaks Parkway San Jose, 95,134 California USA - More Press Enter to: 2) : Located CDROM at /media/software/Cadence/mmsim 13/MMSIM .,133 07.20 the lnx 86. Hotfix/CDROM Specify 1 path of install directory (OR type 'RETURN' to exit: - Enter 13 mmsim Installation Path: /home/tqb/cadence/mmsim 13

3): The next checks have you installed InstallScape, answer y (because the IC 616 has been installed) Let's enter InstallScape has installed the Path: /home/tqb/cadence/installscape asked the Do you want to update InstallScape in /home/tqb/cadence/installscape (Y/N? " option n Ask "Do you want to use InstallScape in /home/tqb/cadence/installscape (Y/N? Option Y then enter InstallScape installed path: /home/tqb/cadence/installscape 1: pop-up installation interface, installscape version 4.1. 2: interface, select Local Directory/Media Install select the installation file path /home/tqb/software/MMSIM 13.1/MMSIM .,066 13.10 The lnx 86. Base/CDROM 1 according to their respective conditions.

3: Choose the right path, click Continue, and select All, click Next, and then select all the you want to install the package, select the location to the front of the new cadence/mmsim13 folder. My path to /home/tqb/cadence/mmsim 13.

4: Click OK to complete the installation.

4): 13 mmsim patching Enter mmsim - Patch folder under Patch folder 1. this Copy patch (sfk) to 13 MMSIM installation folder under /home/tqb/cadence/mmsim 13 2. The mmsim - Patch folder under the flexm copied to /home/tqb/cadence/IC under 616 3. The root, run the command chmod +x sfk ./sfk REP - Yes - Pat - bin/5589 557565381 E ECD B 00,000,008 5508 /31 C 0 C 357565381 ECD B 00,000,008 5508 / -bin/5589 557565381 E ECD 8 million E 8 billion B 81 C 3/33 C 0 C ECD 357565381 8 million E 8 billion B C 81 3/- bin/41574989 FF 415641554154554889 CD C 534,489 3/33 C 0 389 C FF 415641554154554889 CD C 534,489 3/- DIR/ 5) create 13 mmsim link ln -s /home/tqb/cadence/mmsim 13/tools.lnx 86 /home/tqb/cadence/mmsim 13/tools can also enter mmsim directory right-link. #### ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃ 4, Cadence configuration #### ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃ Modify the Environment Variable /home/tqb/ .bashrc. tqb @tqb: ~$ VI /home/tqb/ .bashrc added to the end as follows: #The following path must be and your own computer. alias

lmli=

'

/home/tqb/cadence/IC

616/Tools/bin/lmgrd

-c

/home/tqb/cadence/IC

616/share/license/license.dat ' export OA _ HOME = /home/tqb/cadence/IC 616/OA, v 22.43 .,019/ export CDS = /home/tqb/cadence/IC 616 export MMSIM _ ROOT = /home/tqb/cadence/mmsim 13 export the CDS LIC _ FILE = 5280 @ tqb export LM LICENSE _ _ FILE = $CDS/share/license/license.dat export CDS Netlisting _ _ Mode = Analog export PATH = $MMSIM _ ROOT/Tools/Bin: $MMSIM _ ROOT/Tools/spectre/bin: $CDS/Tools/bin: $CDS/Tools/dfII/bin: $PATH export the MOZILLA HOME = /usr/bin/Netscape Environment Variable Explanation: 1) alias lmli ... : That means the lmli later replaced a long string of the command, and then restart the license on time as long as you enter lmli, and this approach can avoid IC 616 startup programs of the lmgrd mmsim the Start lmgrd conflict.

2) ... .5,280 @tqb , tqb for computer host name 3) the PATH variables, $MMSIM _ ROOT/Tools/bin This value must not be less. Otherwise you cannot run spectre. 4) export the MOZILLA HOME = /usr/bin/Netscape coupled with the fact that this sentence can be used since cadence with the help documents #### ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃ 5, start Cadence #### ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃＃ ＃＃＃＃＃＃＃＃ $: lmli startup license file (lilm) is to be reported that the LD-LSB.so.3 error, this is because LDLSB.so.3 library is not installed.

Solution #yum install redhat-LSB.x86_64 # ln -s /lib/LD-Linux.so.2 /lib/LD-LSB.so. .3 % for LD-LSB link Enter lmli command to turn on license, license start as follows

Open a command terminal and enter the command opens the main interface $: virtuoso You may be prompted libGLU missing. So1Library, install as follows #yum install libGLU. So1- setopt = protected the multilib=false Open Cadence Interface as follows

(Note: IC 616 the entire Platform renamed Virtuoso, not just like before, just Layout/Schematic Editor called Virtuoso. This is simply in order to strengthen its brand concept, so much so that the command icfb is directly converted to virtuoso. )