[E-Book - Free Energy] How to Build a Radionic Device

How to build a

Radionics Device

That works by Mind Power

First layer made of copperfoil

Connectors; use two to connect to the dials, two to connect to an antenna (or witness coil), two to connect to the rubbing plate and two to connect to the headband.

second layer: mirror (try to get the best quality)

Third layer made of Orgonite

Magnets; 4 magnets with North up and 4 magnets with North down

Place a CLEAN DTcrystal on the third (orgon) layer, use tape to connect, but NEVER use glue!!

Radionic Heart

© Kees de Jonge

this is the heart of the device, see next page to find more instructions

1

© Kees de Jonge

N

4

N S

S

N

S

eight magnets connect to the copperfoil N=North S=South

S

this shape is made of copperfoil. 1st layer

N

double terminated quartz crystal

5

2

this is a mirror. 2nd layer

side view

view from above

made of orgonite 1 cm thick . 3rd layer.

3

© Kees de Jonge

to the heart

if you use 3 dials (don’t use less!!)

to witness coil or Antena

to the heart

How to connect the dials

The dials are potentiometers: 10KW, Wattage 1/2W,. Tolerance 20%, 6mm shaft.for knob, Mount in a 5/16"-diameter hole.

to witness coil or Antena

to the heart

if you use more then 3

to the heart

© Kees de Jonge

Use this shape

Witness coil

connect to headband and rubbingplate

or this one

or this one

© Kees de Jonge

( I use this triangle shape, but you can use any shape you want)

Rubbing plate

Connect to the heart

Connect to the heart Plastic layer, to be placed OVER the copperfoil

Connect to the antenna or witness coil

Copperfoil

© Kees de Jonge

Leather, or other skinfriendly material

Headband

Pyrite

use skinfriendly material like leather

Copperfoil

Make a hole, so the pyrite can be in touch with the skin of your forehead or your 3rd eye

Connect to the heart of the Device

Connect to the antenna or witness coil

© Kees de Jonge

a

b

a or use an antenna instead of the coil

b