DWI-SBI-3.4.1-EM08.doc
Short Description
Download DWI-SBI-3.4.1-EM08.doc...
Description
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 1 of 26
Revision Description: ORIGINATOR
CHECKED BY
QA REVIEW
APPROVED
D. FAHY
S. SCHUURMANS
C. Fenner
P. Lunde
Reference Level 2 Working Procedures
WP 3.5.1 WP 3.5.3
Technical Document Numbering Document Filing and Issue
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 2 of 26
TABLE OF CONTENTS 1.0 2.0 3.0
PURPOSE AND SCOPE............................................................................................................................4 FONT / LETTER TYPE.............................................................................................................................4 WEIGHTS, COLORS AND LINE STYLES............................................................................................5 3.1 DESCRIPTION........................................................................................................................................5 3.2 PLOT DRIVERS......................................................................................................................................6 4.0 LEVEL/LAYER GUIDELINES................................................................................................................7 4.1 DESCRIPTION........................................................................................................................................7 4.2 COMMON LAYERS/LEVELS................................................................................................................9 4.3 PROCESS...............................................................................................................................................10 4.3.1 PROCESS FLOW DIAGRAM.......................................................................................................10 4.3.2 PIPING AND INSTRUMENT DIAGRAM....................................................................................10 4.4 PIPING...................................................................................................................................................11 4.4.1 PLANS AND ELEVATIONS..........................................................................................................11 4.4.2 PLOT PLAN...................................................................................................................................11 4.4.3 EQUIPMENT GENERAL ARRANGEMENT...............................................................................12 4.4.4 PIPING GENERAL ARRANGEMENT.........................................................................................12 4.5 INSTRUMENT AND ELECTRICAL....................................................................................................13 4.5.1 POWER DISTRIBUTION SINGLE LINE DIAGRAM.................................................................13 4.5.2 CONTROL SYSTEM SCHEMATIC..............................................................................................13 4.5.3 LIGHTING SINGLE LINE DIAGRAM.........................................................................................13 4.5.4 HEAT TRACE SINGLE LINE DIAGRAM....................................................................................14 4.5.5 ELECTRICAL TERMINATIONS..................................................................................................14 4.5.6 TRAY ARRANGEMENT...............................................................................................................14 4.5.7 PA/GA TELECOM LAYOUT.........................................................................................................15 4.5.8 INSTRUMENT LOCATION PLAN...............................................................................................15 4.5.9 LIGHTING LOCATION PLAN.....................................................................................................16 4.5.10 FIRE AND GAS LOCATION PLAN..............................................................................................16 4.5.11 ELECTRICAL EQUIPMENT ARRANGEMENT..........................................................................17 4.5.12 HOOK UP DETAILS......................................................................................................................17 4.6 STRUCTURAL......................................................................................................................................18 4.6.1 GENERAL ARRANGEMENT.......................................................................................................18 4.6.2 DETAIL SHEET.............................................................................................................................18 4.6.3 SECTIONS AND DETAILS...........................................................................................................19 4.6.4 LOADOUT AND LIFTING............................................................................................................19 4.6.5 INSTALLATION AIDS..................................................................................................................20 4.6.6 ACCESS AND EGRESS................................................................................................................20 4.6.7 GRATING.......................................................................................................................................21 4.6.8 LADDERS AND DETAILS............................................................................................................21 4.6.9 INTERFACE...................................................................................................................................22 4.6.10 CATHODIC PROTECTION...........................................................................................................22
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 3 of 26
4.6.11 EQUIPMENT SUPPORTS.............................................................................................................23 4.6.12 PIPE, ELECTRICAL AND INSTRUMENT SUPPORTS..............................................................23 4.6.13 MAIN STEEL /FABRICATION (CONSTRUCTION)...................................................................24 4.7 MARINE................................................................................................................................................24 4.7.1 PROCESS FLOW DIAGRAM.......................................................................................................24 4.7.2 PROCESS AND INSTRUMENT DIAGRAM................................................................................25 4.7.3 PIPING SCHEMATIC....................................................................................................................25 4.8 MECHANICAL......................................................................................................................................26 4.8.1 DETAILS........................................................................................................................................26 5.0 CELL LIBRARIES...................................................................................................................................26 6.0 WBLOCK DIRECTORIES.....................................................................................................................26 7.0 SCALED DRAWINGS.............................................................................................................................26 8.0 FILE MANAGEMENT............................................................................................................................27 8.1 GENERAL..............................................................................................................................................27
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
1.0
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 4 of 26
PURPOSE AND SCOPE The purpose of this document is to Standardize CAD drawings produced utilizing Autocad and Microstation software. Autocad (.DWG) and Microstation (.DGN) are the two deliverable formats of SBM-IMODCO. Plant Design Management System (PDMS) may be used on projects, but the deliverable will be one of the fore mentioned.
2.0
FONT / LETTER TYPE The following tables shall be followed for text placement in Autocad and Microstation. The tables depict text height and fonts. Text height and width for scaled drawings will have to be adjusted to maintain the correct height when plotted. Utilizing the SBM-IMODCO Toolbar for Microstation will ensure that all text on the drawing will be the correct font, text height and width, etc. Microstation Purpose All text Headers, Views, Sections, etc.
Font
Height Width Weight
“3”- Engineering 3.0 mm 2.0 mm “3”- Engineering 4.0 mm 3.0 mm
1 2
Autocad Purpose
All text Headers, Views, Sections, etc.
Font
Romans Romans
Width Scale
Color
Height 2.0 mm 5.0 mm
0.9 mm 0.9 mm
Red Green
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
3.0
WEIGHTS, COLORS AND LINE STYLES
3.1
DESCRIPTION
ISSUE DATE:
17 July 2003
Page 5 of 26
The following tables are for reference only and define weights, colors and line styles. In addition, the tables depict the correlation between Autocad and Microstation. Weights and Colors Line Thickness
LINE THICKNESS TABLE Color (Autocad)
Weight (Microstation)
.199 .450 .375 .263 .135 .65 .135 .050
1 (Red) 2 (Yellow) 3 (Green) 4 (Cyan) 5 (Blue) 6 (Magenta) 8 (Dark Grey) 9 (Light Grey)
1 4 2 2 0 6 0 0
Purpose
LINE STYLE TABLE Autocad
Microstation
Continuous Centerline Long Dash (future, hidden
Continuous Center Dashed
0 4 3
lines) Short Dash (hidden lines) Dash-dot Matchline
Dashed2 Dashdot Phantom
2 4 6
Line Styles
3.2
PLOT DRIVERS
Only the following plot drivers shall be used for plotting drawings at SBM-IMODCO. Copy the appropriate driver to your local Autocad or Microstation driver directory. Autocad
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
W:\Autocad\Drivers\SBMI.ctb W:\Autocad\Drivers\SBMIA3.ctb Microstation W:\Microstation\Drivers\SBMI.plt
REV.
C1
ISSUE DATE:
17 July 2003
Page 6 of 26
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
4.0
LEVEL/LAYER GUIDELINES
4.1
DESCRIPTION
REV.
C1
ISSUE DATE:
17 July 2003
Page 7 of 26
It is crucial when creating drawings in Autocad or Microstation that the level guidelines be followed. The following table defines level/layer guidelines and is grouped according to discipline.
DISCIPLINE LEVEL/LAYER GUIDELINES Microstation Level 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20 20 20 20 20 26 27 28
Description Process/Piping - Primary Process/Piping - Secondary Process/Piping - Not Used Process/Piping - Not Used Process/Piping - Not Used Process/Piping - Not Used Process/Piping – Not Used Process/Piping - Access Process/Piping - HVAC Process/Piping - Equipment Electrical - General Electrical - Lighting Electrical - Tray Electrical - Not Used Electrical - Not Used Electrical - Not Used Electrical - Not Used Electrical - Not Used Electrical - Not Used Instrument - General Instrument - Capillary Instrument - Software Instrument - Sonic Instrument - Pneumatic Instrument - Hydraulic Instrument - Tray Instrument - Not Used Instrument - Not Used
Autocad Layer Pipe-P Pipe-S
Access HVAC Equipment Electrical Lighting E-Tray
Instrument Capillary Software Sonic Pneumatic Hydraulic I-Tray
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
29 Instrument - Not Used 30 Steel - Primary Steel-P 31 Steel - Secondary Steel-S 32 Steel - Tertiary Steel-T 33 Steel - Not Used 34 Steel - Not Used 35 Steel - Not Used 36 Mechanical - Primary (thick) Mech-P 37 Mechanical - Secondary (thin) Mech-S 38 Mechanical - Tertiary Mech-T 39 Mechanical - Not Used 40 Special Needs Special 41 Not Used 42 Not Used 43 Not Used 44 Common - Text, View Headings Text 45 Common - Symbols (blocks/cells) Symbols 46 Common - Dimensions Dimension 47 Common - Revisions/Clouds Revision 48 Common - Matchlines Matchlines 49 Common - Background Background * ACAD - HIDDEN Hidden * ACAD - HIDDEN2 Hidden2 * ACAD – Phantom, Existing Phantom * ACAD - Dashed Dashed * ACAD - Centerline Centerline * ACAD - Hatch Hatch * ACAD - Future Future 57 Not Used 58 Not Used 59 Border - Primary (thick) Border-Primary * Border - Secondary (thin) Border-Secondary 61 Border - Logos (SBM, Client) Border-Logos 62 Border - Text Border-Text 63 Border - Cut Line Border-Cut * Use with Autocad only, draw on same layer as subject in Microstation
Page 8 of 26
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 9 of 26
The following tables define requirements for each level/layer by drawing type. This is to ensure plotted drawing consistency and the ease of sharing objects between two drawing types. Project specific or “client” requests will be addressed on a per project basis. 4.2
COMMON LAYERS/LEVELS
Common Layers/Levels Microstation Format Level Weight Line Code Color Description 40 Special requirements 44 1 0 7 All Text 46 1 1 3 All dimensions 47 2 1 7 Revision Clouds and Triangles 48 6 6 5 Matchlines 49 0 9 Acad Miscellaneous background info 59 2 0 2 Border - Primary (thick) 61 2 0 2 Border - Logos (SBM, Client) 62 2 0 7 Border - Text 63 0 0 252 Border - Cut Line * 1 2 3 Acad hidden lines * 1 2 3 Acad hidden lines * All Blocks * 1 7 3 Centerlines * Acad hatching * 1 0 3 Border - Secondary (thin) * 0 9 Acad Phantom, Existing * 1 3 Acad Future * Denotes level to be the same as item drawn (I.e. equipment, piping, etc)
Layer Special Text Dimensions Clouds Matchline Background Border-P Border-Logos Border-Text Border-Cut Hidden Hidden2 Blocks Centerline Hatch Border-S Phantom Future
Autocad Style
Color
Continuous red Continuous red Continuous cyan Phantom2 magenta l. grey Continuous green Continuous green Continuous cyan Continuous l. grey Hidden red Hidden2 red cyan Center2 red Continuous red Continuous red Phantom l.grey Dashed red
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
4.3
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 10 of 26
PROCESS
4.3.1 PROCESS FLOW DIAGRAM
Process Flow Diagram Level 10 1 2 20 11 20 20 20 20 20
Microstation Weight Line Code 2 0 4 0 2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
Color 2 1 2 3 3 3 3 3 3 3
Format Description All Equipment Process/Piping - Primary Process/Piping - Secondary Instrument - General Electrical - General Instrument - Pneumatic Instrument - Capillary Instrument - Software Instrument - Sonic Instrument - Hydraulic
Layer Equipment Pipe-P Pipe-S Instrument Electrical Pneumatic Capillary Software Sonic Hydraulic
Autocad Style Continuous Continuous Continuous Continuous Hidden Continuous Continuous Continuous Continuous Continuous
Color green yellow green red red red red red red red
Autocad Style Continuous Continuous Continuous Continuous Hidden Continuous Continuous Continuous Continuous Continuous
Color green yellow green red red red red red red red
4.3.2 PIPING AND INSTRUMENT DIAGRAM
Process and Instrument Diagram Level 10 1 2 20 11 20 20 20 20 20
Microstation Weight Line Code 2 0 4 0 2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
Color 2 1 2 3 3 3 3 3 3 3
Format Description All Equipment Process/Piping - Primary Process/Piping - Secondary Instrument - General Electrical - General Instrument - Pneumatic Instrument - Capillary Instrument - Software Instrument - Sonic Instrument - Hydraulic
Layer Equipment Pipe-P Pipe-S Instrument Electrical Pneumatic Capillary Software Sonic Hydraulic
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
4.4
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 11 of 26
PIPING
4.4.1 PLANS AND ELEVATIONS
Plans and Elevations Level 1 2 8 10 11 20 30 31 32
Microstation Weight Line Code 4 0 2 0 1 0 2 0 1 0 1 0 1 0 1 0 1 0
Color 4 2 3 2 3 3 3 3 3
Format Description Piping - Primary Piping - Secondary All HVAC All Equipment All Electrical All Instruments Steel - Primary Steel - Secondary Steel - Tertiary
Layer Pipe-P Pipe-S HVAC EQUIPMENT Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color yellow green red green red red red red red
Layer Pipe-P Pipe-S HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color green green red yellow red red red red red
4.4.2 PLOT PLAN
Plot Plan Level 1 2 8 10 11 20 30 31 32
Microstation Weight Line Code 2 0 2 0 1 0 4 0 1 0 1 0 1 0 1 0 1 0
Color 2 2 3 4 3 3 3 3 3
Format Description Piping - Primary Piping - Secondary All HVAC All Equipment All Electrical All Instruments Steel - Primary Steel - Secondary Steel - Tertiary
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 12 of 26
4.4.3 EQUIPMENT GENERAL ARRANGEMENT
Equipment General Arrangement Level 1 2 8 10 11 20 30 31 32
Microstation Weight Line Code 2 0 2 0 1 0 4 0 1 0 1 0 1 0 1 0 1 0
Color 2 2 3 4 3 3 3 3 3
Format Description Piping - Primary Piping - Secondary All HVAC All Equipment All Electrical All Instruments Steel - Primary Steel - Secondary Steel - Tertiary
Layer Pipe-P Pipe-S HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color green green red yellow red red red red red
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color yellow green red green red red red red red
4.4.4 PIPING GENERAL ARRANGEMENT
Piping General Arrangement Level 1 2 8 10 11 20 30 31 32
4.5
Microstation Weight Line Code 4 0 2 0 1 0 2 0 1 0 1 0 1 0 1 0 1 0
Color 4 2 3 2 3 3 3 3 3
Format Description Piping - Primary Piping - Secondary All HVAC All Equipment All Electrical All Instruments Steel - Primary Steel - Secondary Steel - Tertiary
INSTRUMENT AND ELECTRICAL
4.5.1 POWER DISTRIBUTION SINGLE LINE DIAGRAM
Layer Pipe-P Pipe-S HVAC EQUIPMENT Electrical Instrument Steel-P Steel-S Steel-T
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 13 of 26
POWER SINGLE LINE DIAGRAM Level 11
Microstation Weight Line Code 1 0
Color 3
Format Description All Electrical
Layer Electrical
Autocad Style Continuous
Color red
4.5.2 CONTROL SYSTEM SCHEMATIC
Control System Schematic Level 20 11
Microstation Weight Line Code 1 0 1 0
Format Color Description 3 All Instruments 3 All Electrical
Autocad Layer INSTRUMENT Electrical
Style Continuous Continuous
Color red red
4.5.3 LIGHTING SINGLE LINE DIAGRAM
Lighting SINGLE LINE DIAGRAM Level 11
Microstation Weight Line Code 1 0
Color 3
Format Description All Electrical
Layer Electrical
Autocad Style Continuous
Color red
Autocad Style Continuous
Color red
4.5.4 HEAT TRACE SINGLE LINE DIAGRAM
Heat Trace Single Line Diagram Level 11
Microstation Weight Line Code 1 0
Color 3
Format Description All Electrical
Layer Electrical
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 14 of 26
4.5.5 ELECTRICAL TERMINATIONS
Electrical Terminations Level 11
Microstation Weight Line Code 1 0
Color 3
Format Description All Electrical
Layer Electrical
Autocad Style Continuous
Color red
4.5.6 TRAY ARRANGEMENT
Tray Arrangement Level 1 2 8 10 11 13 20 26 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 2 0 4 0 2 0 4 0 1 0 1 0 1 0
Color 1 1 3 1 2 4 2 4 3 3 3
Format Description Piping - Primary Piping - Secondary All HVAC All Equipment Electrical Electrical Tray Instruments Instrument Tray All Steel Steel - Secondary Steel - Tertiary
Layer Pipe-P Pipe-S HVAC Equipment Electrical E-Tray Instrument I-Tray Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red green yellow green yellow red red red
Autocad Style Continuous Continuous Continuous Continuous
Color red red red red
4.5.7 PA/GA TELECOM LAYOUT
PA/GA Telecom Layout Level 1 2 8 10
Microstation Weight Line Code 1 0 1 0 1 0 1 0
Color 1 1 3 1
Format Description Piping - Primary Piping - Secondary All HVAC All Equipment
Layer Pipe-P Pipe-S HVAC Equipment
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
11 20 30 31 32
DWI-SBI-3.4.1-EM08
4 2 1 1 1
0 0 0 0 0
4 2 3 3 3
REV.
C1
ISSUE DATE:
Electrical Instruments All Steel Steel - Secondary Steel - Tertiary
17 July 2003
Electrical Instrument Steel-P Steel-S Steel-T
Page 15 of 26
Continuous Continuous Continuous Continuous Continuous
yellow green red red red
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red green yellow red red red
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red yellow green red red red
4.5.8 INSTRUMENT LOCATION PLAN
Instrument Location Plan Level 1 2 8 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 2 0 4 0 1 0 1 0 1 0
Format Color Description 1 Piping - Primary 1 Piping - Secondary 3 All HVAC 1 All Equipment 2 Electrical 4 Instruments 3 All Steel 3 Steel - Secondary 3 Steel - Tertiary
Layer Pipe-P Pipe-S HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
4.5.9 LIGHTING LOCATION PLAN
Lighting Location Plan Level 1 2 8 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 4 0 2 0 1 0 1 0 1 0
Color 1 1 3 1 4 2 3 3 3
Format Description Piping - Primary Piping - Secondary All HVAC All Equipment Electrical Instruments Steel - Primary Steel - Secondary Steel - Tertiary
Layer Pipe-P Pipe-S HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 16 of 26
4.5.10FIRE AND GAS LOCATION PLAN
Fire and Gas Location Plan Level 1 2 8 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 2 0 4 0 1 0 1 0 1 0
Color 1 1 3 1 2 4 3 3 3
Format Description Piping - Primary Piping - Secondary All HVAC All Equipment Electrical Instruments Steel - Primary Steel - Secondary Steel - Tertiary
Layer Pipe-P Pipe-S HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red green yellow red red red
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red yellow green red red red
4.5.11ELECTRICAL EQUIPMENT ARRANGEMENT
Electrical Equipment Arrangement Level 1 2 8 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 4 0 2 0 1 0 1 0 1 0
4.5.12HOOK UP DETAILS
Color 1 1 3 1 4 2 3 3 3
Format Description Piping - Primary Piping - Secondary All HVAC All Equipment Electrical Instruments Steel - Primary Steel - Secondary Steel - Tertiary
Layer Pipe-P Pipe-S HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 17 of 26
Hook Up Details Level 20
4.6
Microstation Weight Line Code 1 0
Color 3
Format Description All Electrical
Layer Electrical
Autocad Style Continuous
Color red
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red red green red red
Autocad Style
Color
STRUCTURAL
4.6.1 GENERAL ARRANGEMENT
General Arrangement Level 1 9 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0 2 0 1 0 1 0
Color 3 3 3 3 3 4 2 2
Format Description All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
Layer Piping HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
4.6.2 DETAIL SHEET
Detail Sheet Level
Microstation Weight Line Code
Color
Format Description
Layer
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
1 9 10 11 20 30 31 32
DWI-SBI-3.4.1-EM08
1 1 1 1 1 2 1 1
0 0 0 0 0 0 0 0
3 3 3 3 3 4 2 2
REV.
C1
ISSUE DATE:
All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
17 July 2003
Page 18 of 26
Piping HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
red red red red red green red red
Layer Piping HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red red green red red
Layer Piping HVAC Equipment Electrical Instrument Steel-P
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red red green
4.6.3 SECTIONS AND DETAILS
Sections and Details Level 1 9 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0 2 0 1 0 1 0
Color 3 3 3 3 3 4 2 2
Format Description All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
4.6.4 LOADOUT AND LIFTING
Loadout and Lifting Level 1 9 10 11 20 30
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0 2 0
Color 3 3 3 3 3 4
Format Description All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
31 32
DWI-SBI-3.4.1-EM08
1 1
0 0
2 2
REV.
C1
ISSUE DATE:
Steel Secondary Steel Tertiary
17 July 2003
Steel-S Steel-T
Page 19 of 26
Continuous Continuous
red red
4.6.5 INSTALLATION AIDS
Installation Aids Level 1 9 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0 2 0 1 0 1 0
Color 3 3 3 3 3 4 2 2
Format Description All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
Layer Piping HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red red green red red
Layer Piping Access HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red green red red red red red red red
4.6.6 ACCESS AND EGRESS
Access and Egress Level 1 8 9 10 11 20 30 31 32
Microstation Weight Line Code 1 0 2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
Format Color Description 3 All Piping 4 Access 3 All HVAC 3 All Equipment 3 All Electrical 3 All Instruments 2 Steel Primary 2 Steel Secondary 2 Steel Tertiary
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 20 of 26
4.6.7 GRATING
Grating Level 1 9 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0 1 0 1 0 2 0
Color 3 3 3 3 3 2 2 4
Format Description All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
Layer Piping HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red red red red green
Layer Piping HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red red red red red
4.6.8 LADDERS AND DETAILS
Ladders and Details Level 1 9 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0 1 0 1 0 2 0
Color 3 3 3 3 3 2 2 4
Format Description All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
4.6.9 INTERFACE
Interface
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
Level 1 9 10 11 20 30 31 32
DWI-SBI-3.4.1-EM08
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0 1 0 1 0 2 0
Color 3 3 3 3 3 2 2 4
REV.
C1
ISSUE DATE:
Format Description All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
17 July 2003
Page 21 of 26
Layer Piping HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red red red red green
Layer Piping HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red red red red green
Layer Piping
Autocad Style Continuous
Color red
4.6.10CATHODIC PROTECTION
Cathodic Protection Level 1 9 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0 1 0 1 0 2 0
Color 3 3 3 3 3 2 2 4
Format Description All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
4.6.11EQUIPMENT SUPPORTS
Equipment Supports Level 1
Microstation Weight Line Code 1 0
Format Color Description 3 All Piping
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
9 10 11 20 30 31 32
DWI-SBI-3.4.1-EM08
1 1 1 1 1 2 1
0 0 0 0 0 0 0
3 3 3 3 2 4 2
REV.
C1
ISSUE DATE:
All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
17 July 2003
HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
Page 22 of 26
Continuous Continuous Continuous Continuous Continuous Continuous Continuous
red red red red red green red
Autocad Style Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Color red red red red red red green red
Autocad Style Continuous Continuous Continuous Continuous Continuous
Color red red red red red
4.6.12PIPE, ELECTRICAL AND INSTRUMENT SUPPORTS
Piping, Electrical and Instrument Supports Level 1 9 10 11 20 30 31 32
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0 1 0 2 0 1 0
Color 3 3 3 3 3 2 4 2
Format Description All Piping All HVAC All Equipment All Electrical All Instruments Steel Primary Steel Secondary Steel Tertiary
Layer Piping HVAC Equipment Electrical Instrument Steel-P Steel-S Steel-T
4.6.13MAIN STEEL /FABRICATION (CONSTRUCTION)
Main Steel / Fabrication (Construction) Level 1 9 10 11 20
Microstation Weight Line Code 1 0 1 0 1 0 1 0 1 0
Format Color Description 3 All Piping 3 All HVAC 3 All Equipment 3 All Electrical 3 All Instruments
Layer Piping HVAC Equipment Electrical Instrument
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
30 31 32
4.7
DWI-SBI-3.4.1-EM08
2 1 1
0 0 0
4 2 2
REV.
C1
ISSUE DATE:
Steel Primary Steel Secondary Steel Tertiary
17 July 2003
Steel-P Steel-S Steel-T
Page 23 of 26
Continuous Continuous Continuous
green red red
Autocad Style Continuous Continuous Continuous Continuous Hidden Continuous Continuous Continuous Continuous Continuous
Color green yellow green red red red red red red red
Autocad Style Continuous Continuous Continuous Continuous Hidden Continuous Continuous Continuous
Color green yellow green red red red red red
MARINE
4.7.1 PROCESS FLOW DIAGRAM
Process Flow Diagram Level 10 1 2 20 11 20 20 20 20 20
Microstation Weight Line Code 2 0 4 0 2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
Format Color Description 2 All Equipment 4 Process/Piping - Primary 2 Process/Piping - Secondary 3 Instrument - General 3 Electrical - General 3 Instrument - Pneumatic 3 Instrument - Capillary 3 Instrument - Software 3 Instrument - Sonic 3 Instrument - Hydraulic
Layer Equipment Pipe-P Pipe-S Instrument Electrical Pneumatic Capillary Software Sonic Hydraulic
4.7.2 PROCESS AND INSTRUMENT DIAGRAM
Process and Instrument Diagram Level 10 1 2 20 11 20 20 20
Microstation Weight Line Code 2 0 4 0 2 0 1 0 1 0 1 0 1 0 1 0
Format Color Description 2 All Equipment 4 Process/Piping - Primary 2 Process/Piping - Secondary 3 Instrument - General 3 Electrical - General 3 Instrument - Pneumatic 3 Instrument - Capillary 3 Instrument - Software
Layer Equipment Pipe-P Pipe-S Instrument Electrical Pneumatic Capillary Software
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
20 20
1 1
DWI-SBI-3.4.1-EM08
0 0
3 3
REV.
C1
ISSUE DATE:
Instrument - Sonic Instrument - Hydraulic
17 July 2003
Page 24 of 26
Sonic Hydraulic
Continuous Continuous
red red
Layer Pipe-P Pipe-S Equipment Electrical Instrument Pneumatic Capillary Software Sonic Hydraulic
Autocad Style Continuous Continuous Continuous Hidden Continuous Continuous Continuous Continuous Continuous Continuous
Color yellow green green red red red red red red red
Layer Mech-P Mech-S Mech-T
Autocad Style Continuous Continuous Continuous
Color yellow green red
4.7.3 PIPING SCHEMATIC
Piping Schematic Level 1 2 10 11 20 20 20 20 20 20
4.8
Microstation Weight Line Code 4 0 2 0 2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
Color 4 2 2 3 3 3 3 3 3 3
Format Description Process/Piping - Primary Process/Piping - Secondary All Equipment Electrical - General Instrument - General Instrument - Pneumatic Instrument - Capillary Instrument - Software Instrument - Sonic Instrument - Hydraulic
MECHANICAL
4.8.1 DETAILS
DETAILS Level 36 37 38
Microstation Weight Line Code 2 0 1 0 0 0
Format Color Description 2 Mechanical - Primary 3 Mechanical - Secondary 1 Mechanical - Tertiary
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
5.0
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 25 of 26
CELL LIBRARIES
To maintain consistency, all drawings originated at SBM-IMODCO shall utilize cell libraries located in the discipline specific directory (W:\Microstation\discipline\cell_libraries). These libraries will be “Read” only and any additions will have to be approved by the discipline lead. Project specific or “client” cell libraries will be located within the project directories.
6.0
WBLOCK DIRECTORIES
To maintain consistency, all drawings originated at SBM-IMODCO shall utilize the wblock directories located in the directory W:\Autocad\discipline\block_libraries. These directories will be “Read” only and any additions will have to be approved by the discipline lead. Project specific “client” blocks will be located within the project directories.
7.0
SCALED DRAWINGS
All scaled drawings are to be drawn “full size”. Text sizes should be adjusted in order to get proper text sizes when plotted. Microstation drawings may utilize the Microstation SBM Toolbar for scale adjustment.
8.0
FILE MANAGEMENT
8.1
GENERAL All CAD drawings (electronic files) are located on the “W” drive under the project number (i.e. W:\12720\ACTIVE\”File.dgn”. All preliminary design files used in the upstart of a new project shall be renamed immediately after the project drawing list (DMS List) becomes available. See Document Numbering WP3.5.1. For none-DMS drawings (Sketches) the originator should use his login initials together with a keyword describing the content of the sketch (i.e. jkk_turret.dgn) as a personal record. Avoid the use of non-descriptive titles, such as jkk_sketch01.dgn. In the course of a project, each document will have various revisions. See Document Filing and Issue WP3.5.3.
DEPARTMENTAL WORK INSTRUCTION ENGINEERING PROJECT MANAGEMENT 2D CAD STANDARDS DWI NUMBER:
DWI-SBI-3.4.1-EM08
REV.
C1
ISSUE DATE:
17 July 2003
Page 26 of 26
View more...
Comments
