DPF General Spec

Share Embed Donate


Short Description

LGE Digital Photo Frame spec...

Description

Product Specification Product Name F1020N-PNB

Regulatory Name F1020N

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

REVISION LIST Revision

Date

Cause

Revised by

Rev. 0.0 Rev. 0.1 Rev. 0.2 Rev. 0.3

09/02/16 09/02/27 09/04/18 09/09/02

Release preliminary spec Correction by Qisda. And updated some item. Some item is updated that is compared with ring design. Remote controller spec and codec list is updated. Stand life time spec and motion sensor spec is added.

S.I. HAN S.I. HAN S.I. HAN S.I. HAN

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

TABLE OF CONTENTS 1. Introduction 1.1 Product Description 1.2 Product summary 1.3 Product suffix information 2. Touch keys, LG Logo LED and Others 2.1 Touch keys 2.2 LG Logo LED 2.3 Remote controller 2.4 Instant On/Off 2.5 DC Power On/Off 3. OSD Function 3.1 OSD Configuration 3.2 OSD Factory out Condition 3.3 SVC OSD Configurations 4. Electrical 4.1 Main controller, Touch control IC and memory information 4.2 User interface and codec list 4.3 PCB 4.4 Gold Capacitor 4.5 Mini-monitor 4.6 Audio out 4.7 Motion sensor (N/A) 5. Power Characteristics 5.1 Power requirement 5.2 Type name 5.3 Power Consumption 5.4 Power Efficiency 6. LCD Panel Characteristics 6.1 Optical Specification 6.2 Dot defects & visual defects 6.3 Image sticking 7. Reliability & Environmental Requirement. 7.1 Accumulated MTBF Requirement 7.2 Components De-rating Requirement 7.3 Reliability test 7.4 Environmental Requirement 7.5 Stand life time Requirement 8. Quality Management System 9. Agency / Regulatory Requirement 9.1 Regulatory Requirement 9.2 Safety check LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

9.3 EMC Requirement 10. Mechanical 10.1 Feature & Material 10.2 Dimensions and weight 10.3 General Technical data 10.4 Screen Alignment Quality Requirement 10.5 Packaging 11. Compatibility / Usability/Optical characteristic 11.1. Compatibility Test 11.2 Usability 11.3. Optical characteristic 12. Cosmetic 12.1 Identification label (Detail contents refer to ID label drawing) 12.2 Barcode label : Gift Box/Box 12.3 User Manual 12.4 CD-ROM

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

1. Introduction 1.1 Product Description Model Name, F1020N is LGE’s new Digital Photo Frame developed by vender will meet the product specification and Performance described herein. With 10.4” of 4:3 LCD this Digital Photo Frame resolution is 800*600 and other specifications are F1020N has USB A, mini B type, 5 in 1(SD/MMC/xD/MS/MS-pro) slot, Audio out(H/P)-Stereo, internal memory (2GB),  1GB memory should be tested by Qisda internal side. new function (Mini-Monitor), new GUI, new design with front filter and W/W Regulatory, Safety and Class-B EMC is required including energy saving. 1.2 Product Summary: Viewable image size Brightness, Typical

10.4” 300 cd/m^2

Contrast Ratio, Typical

500 : 1

Response Time, Typical

30 ms

Display Resolution

800x600

Display color

16.7M

Digital Controls with

15 Languages OSD (English French Spanish Dutch Italian German Swedish Greek Polish Portuguese Romanian Russian Greek Korean Japanese Chinese)

1.3 Product Suffix information Suffix description here below is just reference so Accessory Table has in detail product configuration at each suffix. Suffix : 6-digit Description 1 Product Description A : Set / C : CKD / S : SKD 2,3 Sales Region Refer to Appendix-A 4 Display Source 5 Regulatory 6 Scaler Appendix-A 

Suffix부여기준(LC D변경 내용 적용)_090622.ppt

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

2. Touch keys, LG Logo LED and Others 2.1. Touch keys Touch key is 8 keys with LED as like the below and located in right side of bezel at the front view. F1020N is configured as MENU, UP (▲), DOWN (▼), LEFT, RIGHT, OK, SELECT, RETURN - LED color is Red. -

- I-con : Same with OSD and Romote controller.

-

Menu:

, UP:

-

Right:

, OK:

, Down:

, SELECT:

, Left:

,

, RETURN:

2.1.1 LED Operation 1. If user approach any keys when LED is off, all LED should be on. 2. If user pushes any keys, touch key should be operated by UI. 3. After detaching a finger, touched LED is off and on. - Interval (Off time) : < 1sec 4. If user doesn’t push any keys, LED will be off automatically after 10seconds.

- DC Power On : Push DC power button or Adapter plug in. - DC Power Off : Push DC power button.

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

- Instant On : Speed depends on the instant on time.

2.2. LG Logo LED - LED color is white. - Operation : LED is on when orientation is landscape automatically. If user selects logo off, LED should be off. LED is off when orientation is portrait automatically although user selects logo on. Instant Off mode  LG logo is always On. - Lightness : Current = 27.7 mA

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

2.3. Remote Controller - Distance : Max. 2.5m - Code : NEC Protocal - Force : 150g - Design : Refer to the below (World wide)

CUSTOM Code : 0x827D

- Japan (Black)

- Japan (White)

- Color spec : Refer to the below.

Remote_controller _artwork_090803

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

2.4. Intstant On/Off (under 1 sec) - LED Backlight Off - Must keep last status before pushing the instant key (On  Off) - Background is black. - Instant off mode  LG logo is On though logo light of setup is off.

2.5. DC Power On/Off 2.5.1 Power On Time (under 2 sec) - Off mode status : IR is ready for remote controller and DC power button should be operated. - Splash Image : ( It should be shown just from turning ON DPF to system ready for playing.)

booting_image.pn g

1. Power on (really power supply to DPF) 2. Load code from NAND and OS init -> 720ms 3. Wait for Power key event if necessary 4. Load logo file and show it -> 1s~2s. According to logo picture size. - Interval : From pushing DC power button to displaying the image. Or, from inserting DC plug-in to displaying the image. (Last memory-Power on or off)

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

3. OSD Function F1020N has new UI and GUI. . Functional explanation and detail UI operation refer to attached. 3.1 OSD Configurations

DPF_UI_v1 .9_090427_Eng.pdf

Key Definition_V1.2

Language_Table_ V1.8_090819

3.2 OSD Factory Out Condition The below OSD setting should be checked before shipping out as well as F/W version. On operating time, it should be kept within 2 Hours during producing. If it exceeds 2 hours, operators should reset the operating time using the SVC key . -

Power switch : OFF

-

Power saving : OFF

-

Starting mode : Last mode

-

Orientation : Auto

-

Photo Aspect ratio : Original

-

Video Aspect ratio : Original

-

Language : English (Setup when power is on)

-

Date and Time : 1/1/2009 12:00 AM

-

Brightness : Level 5

-

Logo Light : On

-

Motion Sensor : Off (N/A)

-

Volume : 50

3.3 SVC OSD Configurations SVC OSD is only for service engineer. SVC OSD should be included with the below item. # Entering method : In Product information menu => Input key: Select, Right, Select, Left, Left, Select, Menu - Screen saver : On/Off - Operating time for checking the life time of panel - Panel maker : AUO (N/A) - F/W version : Same with product information (N/A) - Reset (N/A)  Model Option : N/A  Default value : Screen saver – On Operating time – 0 hr

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

4. Electrical 4.1 Main controller, Touch control IC and Memory Information. Vender should provide main controller and flash memory information such as specification, maker name and production history. Main controller Name: S5L2010D Maker: Samsung Touch control IC Name : CG7153AM Maker : Cypress NAND Flash Memory Name : K9GAG08U0M-PCB0 / MT29F16G08CBABAWCES Maker : SAMSUNG/Micron Size : 1G/2G Bytes SDRAM Memory Name : HY57V281620FTP-6 TSOP , EM639165TS-6G Maker : HYNIX, EtronTech Size : 16M Bytes 4.2. User Interface and Codec List 4.2.1 Card Reader Card Type MS (Memory Stick)

Capacity 128 MB

Remark Standard ver1.4

MS-Pro (Memory Stick Pro)

32 GB

Pro ver1.0

SD (Secure Digital)

2 GB

SD ver2.0

SDHC (Secure Digital High Capacity)

32 GB

SD ver2.0

MMC (Multi Media Card)

2 GB

MMC ver 4.1

xD (xD-Picture)

2 GB

xD ver1.2

USB storage

8 TB

FAT32 limitation Not support external HDD

4.2.2. USB Cable

- Type : Straight (Mini B+A) - Maker : XINYA, Honglin - Length : 900 mm - EMI Core : Radial size 10 mm

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

4.2.3 Codec List Category

Codec

Support

Remark

Photo

JPEG

Max: 65535*65535

Up to main controller spec.

BMP GIF PNG JPEG Progressive Video

MPEG1 MPEG4(ASP)

Music

Max: 960x608 Max: 10 Mbps

PCM, ADPCM,Alaw PCM,Mu-law PCM

PCM16bit/8bit MS-ADPCM 4bit DVI-ADPCM 4bit A-law,Mu-law PCM Channel:dual/mono FS:32/44.1/48KHz 24/22.05/16/12/11.025/8KHz Bitrate: 8-320kbps

MP3(Including ID3-Tag)/MPEG Audio

FS:32/44.1/48KHz 24/22.05/16/12/11.025/8KHz Bitrate: 8Kbps ~ 320Kbps, VBR/CBR ID3-tag: Alphabet/number/symbol Code page(ASCII etc.) Channel:dual/mono

4.3 PCB 4.3.1 Main PCB Material(Layer) : Epoxy(4layer) Size : 104.5 x 94.6 mm Thickness: 1.2 mm 4.3.2 Daughter PCB Material (Layer) : Epoxy(2 layer) Size : 93.27x 74.4 mm Thickness : 1 mm 4.3.3 LED PCB Material (Layer) : Epoxy(2 layer) Size : 10.4x 41.5 mm Thickness : 1 mm 4.3.4 Keypad PCB Material (Layer) : Epoxy(2 layer) Size : 16.47x 12.5 mm Thickness : 1 mm 4.3.5 IR PCB Material (Layer) : Epoxy(2 layer) Size : 82.5x 9.19 mm LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

Thickness : 1 mm 4.4 Gold Capacitor Qisda apply a gold capacitor for RTC. LGE spec : RTC operates over 24 hours by gold capacitor after unplugging the adapter. It means the saved time data should be keeping continuously. - The capacity of gold capacitor : 0.22F 4.5 Mini-monitor 4.5.1 Resolution - landscape mode : 800x600 - Portrait mode :

600x800

4.5.2 Frame rate : 15~20 Frame/s 4.5.3 Orientation of screen . Auto : Following feedback from DPF pivot sensor. . Manual 4.5.4 RGB to YcbCr conversion & Driver, Transmitting interface.

Command Set.zip

4.5.5 PC Requirement

USB_mini_monitor _PC_SW_requirements(090629).xls

4.6 Audio out 4.6.1 Speaker (Mono) - Output:0.5W - Size: 14x20x4 - Maker: Power sound 4.6.2 Head phone (Stereo) - Output : >300mVrms ( 0dBFS, 1KHz, 32 ohm) 4.7 Motion sensor (N/A) 4.6.1 Distance : Min. 2m (Daylight) 4.6.2 Angle : ±15°(Landscape and portrait mode)

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

5. Power Characteristics F1020N will use adapter. The Primary rectifier CE capacitor voltage specification will be more than 450V and Fuse should be selected by the maximum inrush current no less than (I^2T) *0.1 All adapter components reability test should be conducted under maximum loaded condition confirmed by LGE. 5.1 Power requirement 5.1.1 Input Voltage / Frequency Range : 90 ~ 264 Vac / 47 ~ 63 Hz 5.1.2 Input Current : ≤0.6 at 100 Vac , ≤0.3 at 240Vac 5.1.2. Output Voltage : 9V ( ± 5% ), 2A 5.2 Type Name EU/Chile USA/Japan England China Korea South Africa Argentina Brazil Israel India Australia

ADS-18C-12N 09018GPG ADS-18C-12N 09018GPCU ADS-18C-12N 09018GPB ADS-18C-12 09018GPCN-B ADS-18C-12N 09018GPK-B ADS-18C-12N 09018GPI ADS-18C-12N 09018GPA ADS-18C-12N 09018GPBR ADS-18C-12N 09018GPx ADS-18C-12N 09018GPI-B ADS-18C-12N 09018GPSA

5.3 Power Consumption 5.3.1 Measurement Pattern : Maximum load condition. Min. -

OFF Mode (DC Power Off) STANDBY Mode (Instant Off) ON Mode

Typ.

Max. 1W

3W 8W

 Need to meet LGE QA spec of power consumption at the off-mode : under 0.8 W. 5.3.2 Energy Saving : Refer to regulation sheet. Follow the sales region(Adapter) : USA – Energy Star V2.0, Korea Energy saving, China Energy saving (Grade-1), Australia- MEPS (Level 5) 5.4 Power Efficiency Adapter power factor should be more than 80% to meet Level-5 of w/w requirement. Power consumption at No-load is less than 0.3W and efficiency an On-mode be over than 0.0626ln(Pno)+0.622 For all 0, 25, 50, 75, 100% load condition and both 115Vac and 230Vac.

6. LCD Panel Characteristic LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

6.1 Optical Specification Test conditions are after 30minutes operation with panel nature resolution and Brightness set to 100%. 6.1.1 General Scope Para meter Maker Type Active Display Area Pixel Pitch [mm] Electrical Interface Color Depth Size [mm] Surface Treatment Operating Mode Back light Unit R/T ( ms ) Typical Max.

Specification AUO TFT Color LCD Module 10.4 inches diagonal 0.264(H)×0.264(V) TTL 16.7 M 228.4(H)×175.4(V)×6.2(T) mm Anti-Glare Normally White ( TN ) LED Rise Time: 12 Fall Time: Rise Time 20 Fall Time

18 30

6.1.2 Optical Characteristic No

2

3 4

Item 1 Viewing Angle

Criteria Horizontal(Right/Left) : +75º/-75º (Typ.)



Vertical(Top/Bottom) : +50º/-60º (Typ.)

Luminance

Average Luminance (cd/m2)

Contrast Ratio CIE Color Coordinates

Wx Wy

300(Typ.) (Full white pattern) 75% (min.)

Luminance Uniformity 500(Typ.) White

Remark

Min. 0.260 0.280

Typ. 0.310 0.330

Max. 0.360 0.380

Remark 1 6500K

Remark 1 : 9 points, Lmin / Lmax

6.2 Dot Defect & visual defects World Wide ( TBD ) Module Source LG Electronics Inc. Business Solutions Company, MNT Division

AUO LGE Confidential

Visual Defects (See Notes) Scratch, Dark/White Spot, Dent Fiber, Lint, Foreign material,

Follow the IIS spec.

Polarizer Bubble, total defects Electrical Defects (See Notes) Bright Dot (Electrical) Dark Dot (Electrical) Total number of defective dots Minimum Distance Between Electrical Defects Two adjacent Bright Dots Two adjacent Dark Dots Distance between defect Bright Dots Distance between defect dork Dots Three or More Adjacent dot Line defect(V-Line/H-line/ Cross line)

N≤2 N≤5 N≤5 N≤1 N≤2 S≥15 mm S≥15 mm

N> allowed number N> allowed number N> allowed number N> allowed number S< allowed distance S< allowed distance S< allowed distance Not allowed Not Allowed

China ( TBD ) Electrical Defects (See Notes) Bright Dot (Electrical) Dark Dot (Electrical) Total number of defective dots Minimum Distance Between Electrical Defects Two adjacent Bright Dots Two adjacent Dark Dots Distance between defect Bright Dots Distance between defect dork Dots Three or More Adjacent dot Line defect(V-Line/H-line/ Cross line)

Count N≤0 N≤3 N≤3 N=0 N≤1 Not allowed S≥10 mm

Reject N> allowed number N> allowed number Reject N> allowed number S< allowed distance S less than 85℃ 3216 type R,C cannot be mounted upper side of PCB. Note-2 Permissiable Ripple Spec = I ripple spec x Ff x Ft Note-3 CE Capacitor Life time

Lr : Capacitor Life Spec. T ㅇ: Capacitor Temp Spec. Tx : Capacitor case Temp. ΔT : Capacitor Self Heat ΔTo: Self Heat Coefficient (85℃ =10, 105℃ = 5) Ia : Measured Ripple Current Is : Ripple Current spec. Ff : Frequency Factor Note-4 Abnormal Voltage Derating. * Abnormal Condition < 90% * FET with Avalanche Diode 1. Vds ≤ 100% @ Abnormal Vds ≤ 95% @ normal 2. If Vds is more than 95%, Component maker's Guarantee letter is required about reliability and Diode built-in. Note-5 Fuse Temperature Derating Fuse Derating considering Temperature factter >= Irms / (0.75 * Tdf) Note-6 If semiconductor component body temperature is over than 100℃, junction temperature margin re-calculation can be acceoted with thermal resistance and it should be less than 80%. Note-7 Panel Front Temperature at 25(room temperature) Test point is 30mm apart from bezel-end and any-point. 7.3 Reliability test On the basis of LGE reliability test standard, LGE will do during development period. Supplier provides test samples both PV and PQ. Alos, Supplier’s Reliability Test Report should be submitted prior than Phase Ext. Detail LGE Reliability Test Standard Ver7.5 is attached as Appendix-B. Appendix-B 

Appendix- B LGE Test STD Ver 7.5 Monitor.ppt

7.4 Environmental Requirement Temperature: Operating 0 to 40 °C LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

Storage -20 to 60 °C Humidity : Operating 10~80 % Storage

0~ 90 %

Operational Altitude 0 – 5,000m (0 – 16,400 Ft) 7.5 Stand life time requirement

- Left/Right : Min. 750 times

8. Quality Management System The attached document is LGE Outsourcing QMS standard. Supploier should follow this process from development and EOL.

LGE OS QMS_20090415

9. Agency / Regulatory Requirement 9.1 Regulatory Requirement LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

W/W regulatory names are below and regulatory requirement is Appendix-C Appendix-c 

LGE_Regulations_ 25th May 2009_LGE.xls

9.2 Safety check 9.2.1 Electric Strength Test : 1) Test Voltage Basic insulation (L + N - Ground) : 1500V AC or 2121V DC Reinforced insulation (L + N - SELV) : 3000V AC or 4242V DC 9.2.2 Leakage Current: 3.5mA Max 1) Test condition: No signal (Self Raster), Power Switch off 2) Bri. / Con. : Max 9.2.3 Hi – pot test and ground continuous test: 100% test in line 1) According to IEC60950, the adapter used by us is class II. The class II product does not connect to earth. So, it can not test Earth continuity. 2) All units will be 100% Hi-Pot tested by our vender before deliver to Qisda. 3) Hi-Pot test condition by our vender as below: Test Voltage: AC3750V Frequency: 50Hz Test time: 3 seconds. 9.2.4 Check Safety components: applied safety regulation (Nemko/ cUL/ TUV-GS etc) 9.3 EMC Requirement 9.3.1 EMI ( radiated / conducted ): Development : more than 5 d B margin, Tested units : 3 sets Each stage, report LGE the tested data and changed points. 1st MP

: more than 3 d B margin, Tested units : 3 sets

From 2nd MP : more than 3 d B margin, Tested units : 1 set /monthly

10. Mechanical 10.1 Feature & Material LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

No

Description

Material

Color

Remark Injection

1

Front cover

BF0670F (PMMA+ABS)

Black color (half-transparency)

2

Middle Line

HF-380-92751 (ABS)

Hongsi-red

3

Back Cover

HF-380-92751 (ABS)

Black

Injection

4

Instant Button

HF-380-92751 (ABS)

Black

Injection

5

Stand

HF-380-92751 (ABS)

Black

Injection+Printing

6

Power button

HF-380-92751 (ABS)

Black

Injection

7

Decoration cab

L-1250Y (PC)

Red/Black

Injection+Painting

Injection+ Vacuum evaporation+UV coating+painting

D:\Proe_dat\ LE104F00\Document\Artwork\six_view Model (1).pdf 10.2 Dimensions and weight Item

Dimension (Unit : mm)

Set Width (W) Depth (D)

213.7 271.9

Height (H)

75

Net weight (Kg)

6.84

Gross weight(Kg)

8.04

10.3General Technical data 10.3.1 Cosmetic Limit No

Contents

Maximum Allowable Limit

LG Electronics Inc. Business Solutions Company, MNT Division

Remark LGE Confidential

1

Color

2

Sink mark, Flow mark,

delta E≤ 2.0 max delta E ≤ 1.0 max Not allowed.

Weld mark

Based on standard specimen Compare with front and rear cover Evaluation Condition -.luminace:350+/-50lx. -.Time:5sec./surface -.View Angle:90 degree -.Distance:700mm from Monitor

3

Others (scratches,burns

Max. Allowable defects (Q’ty and size) Per Surface

blush,surface-

Front, top :Size ≤0.11~0.3mm , Q’ty≤ 3 EA

contamination,

Side(R/L) :Size≤ 0.31~0.7mm, Q’ty≤ 4 EA

silver-streaks etc.)

Others : Size ≤0.51~1.0mm, Q’ty≤ 4 EA The distance between two defects may not be less than 100mm.

4

5 6

Flash

Front, Top≤0.15mm, Side(R/L) ≤0.2mm Others≤0.3mm No dirt or damage MT-11020, MT-11015, MT-11010, High Glossy

Box Texture

This standard applies to all molded parts and surface finishes unless otherwise specified on the part drawing. 10.3.2 Alignment Limit No Contents 1 LCD/Bezel gap

2 3

Maximum Allowable Limit ≤1.0 mm

F/Cover & B/Cover gap Mismatch

Remark Total gap Bezel lines must keep parallel to Panel With cosmetic gap

≤1.0 mm Bucket to Bezel Gap≤+ 0 /- 0.5mm Bucket to Bezel Deflection ≤+/- 1.0mm

With cosmetic step (Back cover cannot be bigger than front cover)

10.3.3 Cosmetic Template The attached Cosmetic Template is used for judgement.

LGEcosmetic_te mplate(REV.00).pdf

10.4 Screen Alignment Quality Requirement 10.4.1 Centering U

Active area(LCD) H : | L−R | ≤ 1.0 mm Bezel

L

R

V : | U−D | ≤ 1.0 mm

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

D 10.4.2 Tilt A E

B

Active area(LCD) | A−B | ≤ 1.0 mm | C−D | ≤ 1.0 mm

G Bezel

F

H C

| E−F | ≤ 1.0 mm | G−H | ≤ 1.0 mm

D

10.5 Packaging 10.5.1 Packaging method and description for unit set

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

Supplier should submit packaging specification

10.5.2 Container Packing Quantity Container Size Stuffing Q’ty (Palletizing) 20 feet 1200 40 feet 2480

Individual N/A N/A

10.5.3 Package Dimensions and weight Item Box Outer size of Box Width 360 ( Unit : mm ) Depth 329 Height 124 Gross weight (Kg) 8.04

11. Compatibility / Usability/Optical characteristic 10.1. Compatibility Test Supplier should provide the memory card list to be tested and LGE will do at PV and PQ qualification period. All problems found by LGE will be closed in time. 11.2 Usability a. Measurement and check in product specification all items. All system bug or wrong opration are not allowed. 11.3. Optical characteristic a. Dark Room b. Measurement Items - Gray scale/Luminance /Contrast ratio/Viewing angle/Cross talk - Response time/flicker/chromatic (white, green, red, blue)

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

12. Cosmetic 12.1 Identification label (Detail contents refer to ID label drawing) Product Name : F1020N-PNB Product Code : F1020N-PNB.AxxVNB MODEL NO.(Regulatory name) : F1020N POWER

: DC 9V, 2.0A

SERIAL NO. : YMMRRCCSSSSS (Must printed in ID label directly)  see note-1 Material : PET 50g Text Color : PANTONE Cool Gray 4, Background  Black, Overprinting color  Black Note-1. Serial number configuration YMMRRCCSSSSS 1 2 3

4

5

1) Y : YEAR(Last digit of Year 2005->5, 2006->6 ,… 2) MM : MONTH(01 ~12) 3) RR: SITE CODE FOR EACH PRODUCTION FACTORY Manufacturing Plant Site Code LGE Gumi Plant KG QISDA QC 4)CC : CODE is self-produced by coding program 5)SSSSS : SERIAL NO. 34 Sequential Count(2digits) + Decimals(3digit) SS : 34 Sequential Count -

Use 0 ~9, A ~Z / Not use alphabet I, O

SSS : Decimals (Assign 001 ~999) The serial number should be applied sequentially regardless of the model, suffix and product(Monitor & LCD TV etc.) If the manufactured month is changed it should be restarted from 00001 to ZZ999. NOTE) Serial NO. Assign Method Per each month, restart 00001~09999, 0a000~0A999, 0B000~0B999 ~~~~0Z999, 10000~19999, 1A000~1A999,1B000~1B999~~~~~1Z999, 20000~29999, 2A000~9Z999, A0000~A9999, AA000~AA999, AB000~AZ999, B0000~~~~ZZ999.

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

ID LABEL _BLACK(090612)- 1

12.2 Barcode label : Gift Box/Box [JAN Code] Production Model :F1020N-PNB GSCP Model : F1020N-PN JAN : 49-89027-001015 [EAN Code] Production Model :F1020N-PNB GSCP Model : F1020N-PN EAN : 8808992664079 [UPC Code] Production Model :F1020N-PNB GSCP Model : F1020N-PN UPC : 719192185883

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

12.3 User Manual 12.3.1 Contents

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

Contents User’s Guide



Important Precautions • Composition product



Installation connection of product

DPF Manager

Description • On safety / On Installation / On Cleaning / On repackaging / On Disposal of • Accessories • Name of parts • Remote control button names and functions • Remote controller sensor • Replacing the remote control battery and • Installing type • Connecting power cord • Connecting USB / Connecting Memory card



Before beginning

• • •

Home menu Slide show Music



Video



File management



Setup

• •

Troubleshooting Specifications

• •

Service Information DPF Manager

install & User’s Guide

• • • • • • • • • • • •

Setting Key-help Screen Composition and buttons Playing Photo and Slide show menu Playing Music Playing screen composition and buttons Playing Music Playing screen composition and buttons Screen composition and buttons File management menu File copy/delete Selecting all files/Unselecting all files - Slide show/Select all/Unselect all/Copy /Delete/Rotate/Sort by/Device selection • Brightness / Orientation / Photo Aspect Ratio / Video Aspect Ratio / Alarm / Music Auto Play / Power saving / Starting mode / Language / Date and time / Motion sensor / Power on message / Internal Format / Reset / Product information • Motion sensor function • Power on message function

• • • • • • • • • • •

Size Dimension Weight. Resolution Power input Power consumption USB Internal memory Supported file format Supported Memory Cards AC-DC Adapter

• • •

How to install DPF Manager Connecting to PC DPF Manager function and setup

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

12.4 CD-ROM CD face size : 117mm A knockout fig is required between 32mm and 35mm diameter. This area is not printable Printing Colors - Background color : Black - Text color : Silver (Natural Color) Printing Method : Off-set LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

CD

CD-ROM Contents - User’s Guide - DPF Manager - Reference Language : 19 Languages ; Dutch English French German Greek Indonesian Italian Japanese Korean Polish Portuguese Romanian Russian Spanish Swedish Turkish Simplified Chinese Hebrew Arabic

LG Electronics Inc. Business Solutions Company, MNT Division

LGE Confidential

View more...

Comments

Copyright ©2017 KUPDF Inc.