Description
SLink Solutions for Site installation
FTTA: Solutions Rosenberger Site Solution provides products for complete wiring of radio base stations - from the antenna to the base station: Discrete Cabling
Copyright © Rosenberger 2014
Trunk Cabling without box
V1.1
Trunk Cabling with box
www.rosenberger.com
| 4
FTTA: Solutions Hybrid Cabling with box
Copyright © Rosenberger 2014
Hybrid Cabling without box
V1.1
FiPro – reuse of Existing feeders
www.rosenberger.com
| 5
FTTA: SLink Discrete Cabling solution Description
Single Duplex Fiber Optic connection for each RRU Direct connection between BBU and RRU
Advantages
Most common solution and used since several years in the field High crush resistance
Challenges
OEM specific connection required for each assembly Less flexible in case of technology change Higher installation cost
Copyright © Rosenberger 2014
V1.1
www.rosenberger.com
| 6
FTTA: SLink Trunking solution Description
Multi fibers in one single cable Up to 48 fibers Jumper connection to RRU
Hybrid Cabling with box
Hybrid Cabling without box
Advantages
Easy and efficient installation (hoisting integrated) Future proof installation High flexibility, individual jumpers can be connected Space saving and low wind load The best price performance ratio for length > 35m Connector fanouts packed in water- and dust-proof protection-tubes One cable for 3,6, 12, … RRU‘s Reduced installation time / cost
Copyright © Rosenberger 2014
V1.1
www.rosenberger.com
| 11
FTTA: SLink Trunking solution Challenges
Distributed antennas Limited flexibility and scalability with box less solution Easy and efficient installation Universal and future proof installation
Rosenberger provides a solution for connecting BBU and RRU with bandwidth of more than 10Gbps which is independent of the used OEM
PreCONNECT FIBER Feeder Outdor Feeders-Variants
Installation Tube Outdoor, IP67 water-proof Copyright © Rosenberger 2014
V1.1
www.rosenberger.com
| 12
FTTA - Direct Fiber Trunk System
FEATURES AND BENEFITS Single fiber trunk with 6 to 36 fibers (3 to 18 Pairs / Channels) LC Compact on bottom; RDC on top. Connections to customer specified connections Singlemode or multimode No enclosure at tower top necessary. Disadvantage and Problem Overlength of jumper cable on the mast is a problem. Extension cable is necessary. Push pull is currently not available. Copyright © Rosenberger 2013
U. Albrecht January 2014
Standard vs. Hybrid Cabling Solution Standard Solution
Hybrid Cable Solution
Antenna
Antenna
RRU
RRU
Canister
FTTA Distribution Enclosure
Fiber Jumper
Power Jumper
Hybrid cable
Fiber trunk
Power Cable
Copyright © Rosenberger 2013
U. Albrecht January 2014
FTTA: SLink Hybrid Boxless solution Description
Pre connected cable with multi fiber and power with tower distribution unit as one piece. Robust RDC interface (similar to N-connectors)
Advantages
Easy and efficient installation Reduced installation time / cost Only one cable run to the tower top Future proof installation High flexibility, individual jumpers can be connected No splice inside canister Double protection against induced currents from lightning stroke which can reduce cost for surge protection up to 50% No mast box -> no additional rental costs Slim outer diameter due to coax design of power cables Space saving and low wind load
Rosenberger No.: L98BCopyright © Rosenberger 2014
V1.1
www.rosenberger.com
| 17
FTTA: SLink Distribution Enclosure At tower top for fiber and power management with RRus. Can also be used at bottom for power and fiber distribution. Description
Available Variants with 3 to 30 LC Dup Ventilation seal Mast and wall mount fixation Operation temperature -40°C to +85°C IP 66/67
Advantages
Easy, efficient and safe installation with only 2 bands Low windload Weather proof distribution box
FTTA Hybrid Distribution enclosure
Fiber Distribution Unit Copyright © Rosenberger 2014
V1.1
www.rosenberger.com
| 22
FTTA: SLink Tower Multi-Fiber System Description
Pre connected multi fiber cable and tower distribution unit as one piece. Robust RDC interface (simlar to N-connectors) Jumper connection to RRU
Advantages
Easy and efficient installation Reduced installation time / cost Future proof installation High flexibility, individual jumpers can be connected Space saving and low wind load No mast box -> no additional rental costs RDC jumper
Challenges
Distributed antennas Limited flexibility and scalability with box less solution
Copyright © Rosenberger 2014
V1.1
Tower Multi-Fiber System
One run of fiber for 3 RRUs without enclosure
www.rosenberger.com
| 24
FTTA: SLink FiPro – Fiber and Power to the Roof Power Cable
Product-Overview
Power Cable Connections:
Power Cable Connection
Fiber-Seal protects the entry point of a fiber optic cable into the centre contact. Rosenberger No.: 1: SLFS001-C05N 2: SLFS001-C06N 3: SLFS001-C07N
1
2
RF feeder cable
Rosenberger No.: SLPCC001-C05N
Top Optical Box or Top Hybrid Box Pigtail fiber (bottom end open) Fiber Seal (feeder / fiber)
3
BTS / Node B BBU Power Supply
Fiber Cable Power Cable
Power Cable Connection
Copyright © Rosenberger 2014
V1.1
Rosenberger No.: SLPCC001-C06N
Rosenberger No.: SLPCC001-C07N www.rosenberger.com
| 27
View more...
Comments