Mettler Toledo Me204 User Manual

Mã số/Code:

USER MANUAL LABOR PROTECTION EQUIPMENT ANALYSIS WEIGHT

Lần ban hành Version Ngày Date issue Số trang Page:

QLVN-HDSD-FEED-03

1 01/03/2021 1/2

METTLER TOLEDO ME204 DESCRIBE Model: ME204. Production company: Mettler Toledo – China. Maximum weighing capacity: 220g. Readability: 0,1mg. Time to reach stability: 2s. PURPOSE Weighing raw materials, finished bran, ... with extremely small error and accuracy to 0.1mg. IMPLEMENTATION STEPS Step 1: Plug in the power to start the scale. After the display shows 00000 can start weighing. If the display shows a different number, we proceed to clean the scale again, then press 0/T to return the weight to 0. Step 2: Weigh the sample cup, wait for the weight to stabilize, then press 0/T to return the weight to 0. Step 3: Put the sample into the cup gently, do not drop the sample out to affect the weighing result. Step 4: Check the correct weight to be weighed (may be 0.09g error). Remove the cup containing the sample. Step 5: Read the results and record them. Do the same from step 2 to step 5 for the next samples. Note: In the process of using the scale, do not turn on the fan, to avoid drafts on the scale, causing errors in the weighing process. Before weighing, it is necessary to calibrate the drop of water to the correct center position, to avoid the difference between the weighing angles. Clean the scale and surrounding area before and after each use. Editor

Ms. NGUYỄN THỊ NGỌC

Checked

Approve

Ms. PHẠM THỊ KIM CHI

Mr. SHARIFFIN ALFORD

Mã số/Code:

USER MANUAL LABOR PROTECTION EQUIPMENT ANALYSIS WEIGHT

CẨM

Lần ban hành Version Ngày Date issue Số trang Page:

QLVN-HDSD-FEED-03

1 01/03/2021 2/2