DIN Standard

October 6, 2017 | Author: Viiee Chauhaan | Category: N/A
Share Embed Donate


Short Description

Download DIN Standard...

Description

Manufacturing Manual Standards.(DIN SPECIFICATIONS) Sl No

Specification No

Description

1

DIN 13 & 14

CLOSE FIT - NON TIGHT CONNECTIONS.

2

DIN 13, Part 1

ISO metric screw threads : corase pitch threads in the daimeter range 1mm to 68mm : nominal sizes

3

DIN 13, Part 12

ISO metric screw threads : 1mm to 300mm daimeter corase and fine pitch threads : selected diameter and pitches

4

DIN 13, Part 13

ISO metric screw threads : selected sizes for screws, bolts and nuts from ISO 52mm diamater and limits.

5

DIN 13, Part 14

Metric ISO thread : basis of the tolerance system for screw threads 1mm dia and larger

6

DIN 13, Part 17

ISO metric screw threads : gauges for bolt and nut threads, gauge dimension and design features

7

DIN 13, Part 21

ISO metric fine threads from 1 to 24.5mm dia limits

8

DIN 13, Part 22

ISO metric fine threads from 25 to 52mm dia limits

9

DIN 13, Part 23

ISO metric fine threads from 53 to 110mm dia limits

10

DIN 13, Part 24

ISO metric fine threads from 112 to 180mm dia limits

11

DIN 13, Part 25

ISO metric fine threads from 182 to 250mm dia limits

12

DIN 13, Part 26

ISO metric fine threads from 252 to 1000mm dia limits

13

DIN 82

RANDEL

14

DIN 509

UNDERCUTS

15

DIN 934

HEXAGON NUTS. (METRIC THREAD, METRIC FINE THREAD TYPES m AND mg)

16

DIN 1479

TURNBUCKLE NUTS (MADE FROM HEXAGON BAR)

17

DIN 1688, Part 1

ROUGH CASTING OF LIGHT METAL ALLOYS; SAND MOULDINGS;GENERAL TOLERANCES,MACHINING ALLOWANCES

18

DIN 1688, Part 3

ROUGH CASTING OF LIGHT METAL ALLOYS; CAVITY DIE CASTING;GENERAL TOLERANCES,MACHINING ALLOWANCES

19

DIN 1688, Part 4

ROUGH CASTING OF LIGHT METAL ALLOYS; DIMENSIONAL TOLERANCES,DIE CASTING

20

DIN 3960

GEAR TOOTH SYSTEMS (SPECIFICATIONS FACTORS AND ERRORS RELATING TO SPUR GEARS BASIC TERMS AND DEFINITION).

21

DIN 3999

GEAR NOTATION; SYMBOLS

22

DIN 5480

INVOLUTE SPLINE JOINTS

23

DIN 6784

EDGES OF WORKPIECES

24

DIN 7150

ISO SYSTEM OF LIMITS AND FITS.

25

DIN 7168, Part 1

GENERAL TOLERANCES (Linear and Angular Dimensions)

26

DIN 7168, Part 2

GENERAL TOLERANCES (Form and position)

27

DIN 7184, Part 1

Tolerances of form and position, definitions, indications and drawings

28

DIN 29531

AEROSPACE- CASTING OF AL.AND MG ALLOYS; TECHNICAL SPECIFICATION

29

DIN 29546

AEROSPACE SHEETS, PLATES AND STRIPS MADE OF WROUGHT ALUMINIUM ALLOYS TECHNICAL SPECIFICATION.

30

DIN 29595

GERMAN STANDARD (FUSION WELDED PARTS, TECHNICAL SPECIFICATION).

31

DTD 5567A

INTERIOR AND EXTERIOR FINISHING SHEME

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF