DIN EN 10250-2

December 1999

D EUTSCHE NORM

Open die steel forgings for general engineering purposes

{

Part 2: Non-alloy quality and special steels English version of DIN EN 10250-2

EN 10250-2

ICS 77.140.45; 77.140.85 Freiformschmiedestücke aus Stahl für allgemeine Verwendung – Teil 2: Unlegierte Qualitäts- und Edelstähle

This standard, together with DIN EN 10250-1, December 1999 edition, supersedes DIN 17100, January 1980 edition (withdrawn in January 1991).

European Standard EN 10250-2 : 1999 has the status of a DIN Standard. A comma is used as the decimal marker.

National foreword This standard has been prepared by ECISS/TC 28. The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steel and Iron Standards Committee), Technical Committee Schmiedestücke. Amendments DIN 17100, January 1980 edition, has been superseded by the specifications of DIN EN 10250-2.

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

Previous editions DIN 17100: 1957-10, 1966-09, 1980-01.

EN comprises 8 pages.

© No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen).

Ref. No. DIN EN 10250-2 : 1999-12 English price group 08

Sales No. 1108 06.00

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

EN 10250-2 October 1999

ICS 77.140.45; 77.140.85

English version

Open die steel forgings for general engineering purposes Part 2: Non-alloy quality and special steels

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

Pièces forgées en acier pour usage général – Partie 2: Aciers de qualité non alliés et aciers spéciaux

Freiformschmiedestücke aus Stahl für allgemeine Verwendung – Teil 2: Unlegierte Qualitäts- und Edelstähle

This European Standard was approved by CEN on 1999-09-09. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels

© 1999. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.

Ref. No. EN 10250-2 : 1999 E

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

Page 2 EN 10250-2 : 1999

2

3

3

3

4

5

8

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

Page 3 EN 10250-2 : 1999

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

Page 4 EN 10250-2 : 1999

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

Page 5 EN 10250-2 : 1999

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

Page 6 EN 10250-2 : 1999

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

Page 7 EN 10250-2 : 1999

Normen-Download-Beuth-Germanischer Lloyd AG-KdNr.32431-LfNr.3415649001-2006-11-20 15:33

Page 8 EN 10250-2 : 1999