Designing a Commercial Kitchen

Designing a commercial kitchen

Designing a commercial kitchen T he he

three prime considerations that dictate kitchen design are: ² Servic Servicee require requiremen ment: t: Consi Consider der the serv service ice the the kitchen kitchen has to provide provide - for instanc instance, e, the numbers numbers being served, is it an la carte menu, plated service, self-service, cafeteria-style, etc? ² Space available: available: Is the the space space allocated allocated sufficient sufficient to fit in the equipment required? ² Budget Budget:: Always Always have have an an accurat accuratee idea idea of spend spend available.

Good 1. 2. 3. 4. 5. 6. 7. 8.

Design Workflow

Delivery Storage Food preparation Cooking Holding Food service area Wash-up Waste disposal

Risk

assessment

 Always carry out a risk assessment of any design to identify any shortfalls ²  for instance, the need to keep the food preparation area separate from the rest of the kitchen to negate the risk of cross-contamination.

Delivery  Ensure goods vehicles have adequate access to the premises, providing direct deliveries to the catering area.  Provide adequate space to allow a goods check-in area before entering the kitchen.

Storage  Where possible, bulk storage should be close to the goods-in area so there's no need for delivery personnel to enter the kitchen and food preparation area.  Never underestimate the need to allow adequate space for dry, chilled and frozen goods. Many suppliers have minimum drop requirements.

Preparation  Position main preparation between bulk storage and the cooking process, to ensure the correct flow pattern.  Different processes should be segregated ² i.e. raw meat and fish separate from prepared foods. If necessary, consider chilled preparation areas for high-risk food environments.

Preparation  In smaller establishments where segregation is not possible, stringent regimes must be employed to ensure segregation of processes, so that utensils and tables are suitably sanitised between processes.  In addition, consider adequate refrigerated storage for prepared food.  Provide adequate prep sinks, separate pot-wash sinks and hand-wash facilities.

Cooking  When selecting cooking equipment, consider the requirements of the menu and the ability of the staff using the equipment.  Although state-of-the-art equipment such as programmable combi-ovens, pressure bratt pans and computerised deep-fat fryers may be nice to have, they may not always be appropriate for the style and content of some menus.

Cooking  Ensure the flow of the cooking suite suits the style of service, with fast-cook equipment such as fryers, salamanders and griddles nearest to the point of service and bulk cooking kit such as bratt pans, convection ovens and boiling pans further away.  Conversely, never underestimate the benefits that hitech equipment can provide, in terms of cost control, and energy and labour savings.  Workflows and safety should be the prime drivers in the layout of a professional kitchen.

Cooking  Simple things include ensuring there's a set-down space next to deep-fat fryers, never sitting a fryer at the end of a run, and always allowing a minimum of 900mm corridor to the front of any cooking equipment, although 1,200mm is ideal.  Consideration should also be given to the mechanical and electrical services available. Sometimes it's not possible to get gas into a building, or you may be restricted by the size of the incoming electrical supply.

Holding  Some food production systems require extensive food holding systems 

T he

holding area is usually near to the food service area

 Food must be kept at the correct temperature

Food 

Service Area

T he

space requirement for service is often underestimated, particularly by architects. Whether the operation is waited service or trayline style, you can minimise queuing by the provision of multi pick-up and service points. Consider adequate space for hot and cold holding of prepared food ready for service.

 If it's a large site, counters may need to be replenished several times during a service period. In an la carte restaurant, allow sufficient space for plating up and hot pass. Where possible, locate the service point close to the final cooking process to avoid double handling.

Wash-up  Nearly always undersized by space planners, the dishwashing operation is key to the success of any catering establishment. If it fails through inefficient planning, the restaurant cannot function. 

T o

determine the space required, the capacity of dishwasher and the amount of ancillary sorting space, calculate the number of crockery, cutlery and hollowware items (don't forget trays) to be used during a service period.

Wash-up  All reputable dishwasher manufacturers can help  you with this calculation and provide you with the correct size system and machine. 

Remember

to allow sufficient space for the storage of clean items and the disposal of rubbish, ensuring the two are segregated to avoid cross-contamination.

Wash-up  Location is paramount to the efficient management of the space. Ideally it should be close to both the restaurant and service area to avoid double handling. 

T he

amount of steam and moist air produced is often underestimated. If possible, consult a ventilation engineer.

Refuse  Always allow for a clearly defined route for dirty dishes that won't conflict with preparation and service areas. Consider the location of an outside refuse bay, well away from the kitchen entrance.  Staff facilities  Ensure that appropriately located and sized facilities for staff changing and locker areas and staff toilets are available near the kitchen.

Environmental  Consider energy efficiency of all equipment, as fuel costs are now higher than ever. Also, consider volumes of water used and research your product; many major manufacturers use energy efficiency as their USPs.  Consider any "green" policies, allow for recycling of bottles, aluminium, plastic and paper. If possible, have a recycling area.

Environmental  Ensure correct ventilation and air replacement are available in all areas. Consult an engineer to ensure you comply with the minimum requirements of the local authority's clean air policy.  Ensure lighting provides at least the minimum requirement of 500 lux at worktop height.  Invite your local EHO to view your plans and pass comment. It's always best to get them on your side at the outset.

Building fabric  Ensure floors (non-slip), walls and ceilings can be cleaned and maintained easily.  And remember, almost all designs are a compromise. A good design is one that best suits the constraint of space and budget without detrimental effect on service.