D--internet-myiemorgmy-iemms-assets-doc-alldoc-document-10805_MS-SIRIM-190716.pdf
Short Description
Download D--internet-myiemorgmy-iemms-assets-doc-alldoc-document-10805_MS-SIRIM-190716.pdf...
Description
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS/MS IEC/ MS ISO
MS No
Year
MS
15779
2015
MS
2586
2015
MS
2586
2015
MS
2592
2015
MS 2592: 2015
Bead wire - specification
MS
2602
2015
MS 2602 : 2015
Compressed air work in tunnelling - code of practice
MS
1242
2014
MS 1242 : 2014
Assessment of in-situ compressive strength in structures and precast concrete components - complimentary guidance to that given in MS EN 13791 (First revision)
Malaysian Standard
MS
141
2014
MS 141: 2014
Ballasts for tubular fluorescent lamps - Performance (watt loss) requirements (Second revision)
MS
144
2014
MS 144:2014
Steel wire for reinforcement of concrete products - specification (Fourth revision)
MS
145
2014
MS 145:2014
Steel fabric for the reinforcement of concrete - specification (Fourth revision)
MS
146
2014
MS 146:2014
Steel for the reinforcement of concrete - weldable reinforcing steel - bar, coil and decoiled product - specification (Fourth revision)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1489
2014
MS 1489-1 : 2014
Fire extinguishing installations and equipment - Part 1: Hose reels and foam inlets (First revision)
Malaysian Standard
RACK 1
MS
1489
2014
MS 1489-2 : 2014
Fire extinguishing installations and equipment - Part 2: Wet and dry firefighting mains
Malaysian Standard
RACK 1
MS
1495
2014
MS 1495 : 2014
Blooms/billets for hot rolled non-alloyed structural steel sections - Specification (First revision)
Malaysian Standard
RACK 1
MS
1525
2014
MS 1525 : 2014
Energy efficiency and use of renewable energy for non-residential buildings - Code of practice (Second revision)
MS
1539
2014
MS 1539-5 : 2014
Portable fire extinguishers - Part 5: Fire extinguisher for use on class F fires
MS
2095
2014
MS 2095 : 2014
Radiant barrier and reflective insulation building materials - Specification (First revision)
MS
2247
2015
MS 2247: 2015
MS
2282
2014
MS 2282-2 :
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian
Accession No
MS 15779 : 2015 MS 2586-10 : 2015 MS 2586-7 : 2015
Title Condensed aerosol fire extinguishing systems - Requirements and test methods for components and system design, installation and maintenance - General requirements (ISO 15779:2011,MOD) Smoke and heat control systems - Part 10: Power supplies Smoke and heat control systems - Part 7: Smoke duct sections
Carbon steels for machine structural use - specification Masonry units - Specification - Part 2: Calcium silicate masonry units
Type
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
Location
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 1 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
2014 MS 2441-2 : 2014 MS 2526-10: 2014 MS 2526-11: 2014 MS 2526-12: 2014 MS 2526-4: 2014 MS 2526-5: 2014 MS 2526-6: 2014 MS 2526-7: 2014
Standard On site sewage treatment units - Part 2: Packaged prefabricated small sewage treatment system specifications
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
2441
2014
MS
2526
2014
MS
2526
2014
MS
2526
2014
MS
2526
2014
MS
2526
2014
MS
2526
2014
MS
2526
2014
MS
2548
2014
MS 2548-1: 2014
Plastic piping system for non pressure underground drainage and sewerage - Structured wall piping systems of unplasticised poly (vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Dimensions
Malaysian Standard
RACK 1
MS
2548
2014
MS 2548-2: 2014
Plastic piping system for non pressure underground drainage and sewerage - Structured wall piping systems of unplasticised poly (vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Technical delivery specifications
Malaysian Standard
RACK 1
MS
2558
2014
MS 2558: 2014
Safety and health signage used in the workplace - Specification (First revision)
MS
2562
2014
MS 2562: 2014
Moulded expended perlite block and pipe thermal insulation - specification
MS
2577
2014
MS 2577 : 2014
Architecture and asset management of masjid - code of practice
MS
2578
2014
MS 2578-1 : 2014
Code of practice on energy efficiency and conservation for industrial electrical equipment - Part 1: Fans
MS
2578
2014
MS 2578-3 : 2014
Code of practice on energy efficiency and conservation for industrial electrical equipment - Part 3: Motors
MS
2581
2014
MS 2581 : 2014
Production of biogas - code of practice
MS
2596
2014
MS 2596-1: 2014
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 1: Specification (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard
MS
2596
2014
MS 2596-2: 2014
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 2: Test methods (First revision)
Malaysian Standard
Urban stormwater management - Part 10: Gross pollutant traps Urban stormwater management - Part 11: Water quality ponds and wetlands Urban stormwater management - Part 12: Erosion and sediment control Urban stormwater management - Part 4: Roof and property drainage Urban stormwater management - Part 5: On site detention Urban stormwater management - Part 6: Rainwater harvesting Urban stormwater management - Part 7: Detention ponds
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 2 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
2596
2014
MS 2596-3: 2014
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 3: Installation for roof covering (First revision)
Malaysian Standard
RACK 1
MS
1034
2013
MS 1034 : 2013
Unplasticised polyvinyl chloride (PVC-U) conduit for underground telecommunication cables - specification (First revision)
Malaysian Standard
RACK 1
MS
1462
2013
MS 1462-4-1: 2013
Metal scaffolding Part 4: Temporary works equipement - Section 1: Scaffolds performance requirements and general design
Malaysian Standard
RACK 1
MS
1462
2013
MS 1462-4-2: 2013
Metal scaffolding Part 4: Temporary works equipment - Section 2: Information on materials
MS
1748
2013
MS 1748: 2013
Offshore pipeline systems (First revision)
MS
1017
2012
MS 1017 : 2012
Aluminium framed sliding glass doors - specification (First revision)
MS
1462
2012
MS 1462-1: 2012
Metal scaffolding Part 1: Prefabricated scaffolds - Specification for steel frame scaffolding (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1462
2012
MS 1462-3-2: 2012
Metal scaffolding Part 3: Prefabricated scaffoldings - Section 2: Particular methods of structural design for steel and aluminium modular system scaffoldings
Malaysian Standard
RACK 1
MS
1489
2012
MS 1489-1 : 2012
Fire extinguishing installations and equipment - Part 1: Hose reels and foam inlets (First revision)
Malaysian Standard
RACK 1
MS
2286
2012
MS 2286-2: 2012
Plastics piping systems for hot and cold water installations - polypropylene (PP) - Part 2: Pipes (ISO 15874-1: 2003, AMD. 1: 2007, MOD)
Malaysian Standard
RACK 1
MS
2286
2012
MS 2286-3: 2012
Plastics piping systems for hot and cold water installations - polypropylene (PP) - Part 3: Fittings (ISO 15874-3: 2003, MOD)
Malaysian Standard
RACK 1
MS
2286
2012
MS 2286-7: 2012
Plastics piping systems for hot and cold water installations - polypropylene (PP) - Part 7: Guidance for the assessment of conformity
MS
2318
2012
MS 2318:2012
Demolition of buildings - code of practice (First revision)
MS
2439
2012
MS 2439: 2012
Dynamic weather resistance of roof -Test method
MS
2440
2012
MS 2440: 2012
Design, installation, maintenance and inspection of PV mounting system - code of practice
MS
2449
2012
MS 2449: 2012
Performance rating of water-chilling packages using vapor compression cycle
MS
2476
2012
MS 2476: 2012
Guidelines for disposal of laboratory chemical wastes (LCW)
MS
2478
2012
MS 2478: 2012
Traffic control equipment - performance of signal heads
MS
2479
2012
MS
2479
2012
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS 2479-1: 2012 MS 2479-2: 2012
Oil tempered wire - Part 1: Mechanical springs Oil tempered wire - Part 1: Valve springs
RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 3 of 73
March 14, 2017 MS 2480-1: 2012 MS 2480-2: 2012
[MALAYSIAN STANDARD – IEM LIBRARY]
2480
2012
MS
2480
2012
MS
2508
2012
MS 2508-1: 2012
Plastic piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009, MOD)
Malaysian Standard
RACK 1
MS
2508
2012
MS 2508-2: 2012
Plastic piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: Pipes (ISO 22391-2:2009, MOD)
Malaysian Standard
RACK 1
MS
2508
2012
MS 2508-3: 2012
Plastic piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: Fittings (ISO 22391-3:2009, MOD)
Malaysian Standard
RACK 1
MS
2508
2012
MS 2508-7: 2012
Plastic piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assesment of conformity (ISO/TS 22391-7:2011, MOD)
Malaysian Standard
RACK 1
MS
2526
2012
MS
2526
2012
MS
2526
2012
MS
1214
2011
MS
1462
2011
MS 1462-2-3: 2011
Metal scaffolding Part 2: Tubular (Tube and Coupler) scaffolds - Section 2: Specification for aluminium tubes
Malaysian Standard
MS
1462
2011
MS 1462-3-1: 2011
Metal scaffolding Part 3: Prefabricated scaffolds - Section 1: Specification for steel and aluminium modular system scaffolding
MS
1522
2011
MS 1522 : 2011
Vitreous China Water Closet Pans - Specification (Third revision)
MS
1722
2011
MS 1722 : 2011
Occupational safety and health (OSH) management systems - Requirements (First revision)
MS
2382
2011
MS 2382: 2011
Factory made wrought butt welding fittings
MS
2394
2011
MS 2394-1: 2011
Building and civil engineering - Vocabulary Part 1: General terms
MS
2412
2011
MS 2412: 2011
Vinyl (PVC) Coated steel wire and welded wire fabric for reinforcement - specification
MS
2414
2011
MS 2414: 2011
Steel wire and wire products for fences - steel wire chain link fencing
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS 2526-1: 2012 MS 2526-2: 2012 MS 2526-3: 2012 MS 1214-7: 2011
Hard drawn steel wires - Part 1: Principally for static load
Malaysian Standard Malaysian Standard
MS
Hard drawn steel wires - Part 2: Principally for dynamic load
Urban stormwater management - Part 1: Design acceptance criteria Urban stormwater management - Part 2: Quantity design fundamentals Urban stormwater management - Part 3: Quantity design fundamentals Precast concrete piles - Part 7: Installation of precast concrete piles - requirements
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 4 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY] Malaysian Standard Malaysian Standard
MS
2426
2011
MS 2426: 2011
Planning and designing for basement parking - code of practice
RACK 1
MS
2427
2011
MS 2427: 2011
Welding - Guidelines for a metallic materials grouping system
MS
2428
2011
MS 2428: 2011
Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables (First revision) (ISO 15610:2003,MOD)
Malaysian Standard
RACK 1
MS
2429
2011
MS 2429: 2011
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure (First revision) (ISO 15612:2004,MOD)
Malaysian Standard
RACK 1
MS
1067
2010
MS 1067 : 2010
Plastics containers for pharmaceutical use - other than parenteral and ophthalmic preparations - specification (First revision)
Malaysian Standard
RACK 1
MS
1462
2010
MS 1462-2-1: 2010
Metal scaffolding Part 2: Tubular (tube and coupler) scaffolds Section 1: Specification for steel tubes
Malaysian Standard
RACK 1
MS
1462
2010
MS 1462-2-2: 2010
Metal scaffolding Part 2: Tubular (Tube and Coupler) scaffolds - Section 2: Specification for aluminium tubes
Malaysian Standard
RACK 1
MS
1501
2010
MS 1501: 2010
Plastics - injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (First revision) (ISO 294-4: 2001, COR. 1:2007, MOD)
Malaysian Standard
RACK 1
MS
1539
2010
MS 1539-6: 2010
Specification For Portable Fire Extinguishers - Part 6: Specification For Small Disposable Fire Extinguishers Of Aerosol Type
Malaysian Standard
RACK 1
MS
1539
2010
MS 1539-8: 2010
Specification For Portable Fire Extinguishers - Part 8: Chemical Powders (First Revision)
MS
1837
2010
MS 1837: 2010
Installation of grid-connected photovoltaic (PV) system (First revision)
MS
2279
2010
MS 2279: 2010
Performance standards in building - definition and calculation of area and space indicators (ISO 9836: 1992, MOD)
MS
2280
2010
MS 2280: 2010
Aggregates for mortar: specification
MS
2286
2010
MS 2286-1: 2010
Plastics piping systems for hot and cold water installations - polypropylene (PP) - Part 1: General (ISO 15874-1: 2003, AMD. 1: 2007, MOD)
MS
2289
2010
MS 2289: 2010
Aluminium an aluminium allay - extruded shapes
MS
2298
2010
MS 2298: 2010
Rolles carbon steel for cold - finished steel bars
MS
2318
2010
MS 2318: 2010 (P)
Demolition of buildings - code of practice (First revision)
MS
2319
2010
MS 2319: 2010
Wire rods for core wire of covered electrode
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 5 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
2322
2010
MS 2322: 2010
Fluids for electrotechnical applications - unused mineral insulating oils for transformers and switchgear
Malaysian Standard
RACK 1
MS
2324
2010
MS 2324-1: 2010
Method of specifying thermoplastics injection mouldings - Part 1: General requirements
Malaysian Standard
RACK 1
MS
2324
2010
MS 2324-2: 2010
Method of specifying thermoplastics injection mouldings - Part 2: Additional requirements for polycarbonate, polymide and polyethlene mouldings
Malaysian Standard
RACK 1
MS
2326
2010
MS 2326: 2010
Ergonomics of the thermal environment - methods for the assesesment of human responses to contract with surfaces at moderate temperature
Malaysian Standard
RACK 1
MS
2327
2010
MS 2327: 2010
Ergonomics of the thermal environment - application of Malaysian Standards to people with special requirements
Malaysian Standard
RACK 1
MS
2328
2010
MS 2328-1: 2010
Ergonomics of the thermal environment - evaluation of thermal environments in vehicled - Part 1: Principles and methods for asessesment of thermal stress
Malaysian Standard
RACK 1
MS
2329
2010
MS 2329: 2010
Ease of operation of everyday products - walk up and use products - test method
Malaysian Standard
RACK 1
MS
2330
2010
MS 2330: 2010
Plastics film and sheeting - determination of average thickness of a sample and average thickness and yield of a roll, by gravimetric techniques (Gravimetric thickness) (ISO 4591: 1992, MOD)
Malaysian Standard
RACK 1
MS
2331
2010
MS 2331: 2010
Plastics - thermosetting moulding materials - determination of shrinkage (ISO 2577: 2007, MOD)
MS
2338
2010
MS 2338: 2010
Steel fibres for concrete - definitions, specification and conformity
MS
2361
2010
MS 2361: 2010
Recovered waste oil - specification
MS
2363
2010
MS 2363: 2010
Work in tunnelling - code of practice
MS
1137
2009
MS 1137 : 2009
Low carbon steel wires - specification (First revision)
MS
1601
2009
MS 1601-1: 2009
Specification for fire resistant doorsets Part 1: Design requirements and variation from the tested specimen
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1601
2009
MS 1601-3: 2009
Specification for fire resistant doorsets Part 3: Code of practice for installation of fire resistant doorsets
Malaysian Standard
RACK 1
MS
1601
2009
MS 1601-4: 2009
Specification for fire resistant doorsets Part 4: Requirements and method of determining the performance of mortice locksets
Malaysian Standard
RACK 1
MS
2230
2009
MS 2230: 2009
Electromagnetic compatibility - Environment - Overvoltages on public eletricity distribution networks
Malaysian Standard
RACK 1
MS
2232
2009
MS 2232-1: 2009
Guidelines for limiting exposure to time-varyinng electric, magnetic and electromagnetic fields - Part 1: For frequency up to 3kHz
MS
2236
2009
MS 2236: 2009
Speed hump - specification for materials, design and installation
Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1
Page 6 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY] Malaysian Standard Malaysian Standard
MS
2246
2009
MS 2246: 2009
Specification for deformed and plain carbon-steel bars for concrete reinforcement
MS
2277
2009
MS 2277-1: 2009
Welding and allied processes - vocabulary- Part 1: Metal welding processes (ISO 8571: 1998, MOD)
MS
26
2009
MS 26-1-2:2009
Testing of concrete - Part 1: Fresh concrete - Section 2: Slump test (Second revision)
Malaysian Standard
RACK 1
MS
26
2009
MS 26-1-3:2009
Testing of concrete - Part 1: Fresh concrete - Section 3: Vebe test (Second revision)
Malaysian Standard
RACK 1
MS
26
2009
MS 26-1-5:2009
Testing of concrete - Part 1: Fresh concrete - Section 5: Flow table test (Second revision)
Malaysian Standard
RACK 1
MS
26
2009
MS 26-1-6:2009
Testing of concrete - Part 1: Fresh concrete - Section 6: Density (Second revision)
Malaysian Standard
RACK 1
MS
26
2009
MS 26-1-7:2009
Testing of concrete - Part 1: Fresh concrete - Section 7: Air content - Pressure methods (Second revision)
Malaysian Standard
RACK 1
MS
26
2009
MS 26-1-8:2009
Testing of concrete - Part 1: Fresh concrete - Section 8: Compacting factor test (second revision)
Malaysian Standard
RACK 1
MS
1757
2008
MS 1757-1: 2008
Chlorinated poly(vinyl chloride) PVC-C Plastic piping system - Part 1: Specification for schedules 40 and 80 pipes
Malaysian Standard
RACK 1
MS
1757
2008
MS 1757-2: 2008
Chlorinated poly(vinyl chloride) PVC-C Plastic piping system - Part 2: Specification for schedules 40 socket - type pipe fittings
Malaysian Standard
RACK 1
MS
1757
2008
MS 1757-3: 2008
Chlorinated poly(vinyl chloride) PVC-C Plastic piping system - Part 3: Specification for schedules 80 pipe fittings
MS
1790
2008
MS 1790: 2008
Plastics petri dishes for single use - specification
MS
2070
2008
MS 2070-2: 2008
Scheduled waste - sampling technical guide - Part 2: Description of media and device selection guide
MS
2072
2008
MS 2072: 2008
Guidelines for developing and implementing early action for site remediation
MS
1138
2007
MS
1138
2007
MS
1138
2007
MS
1138
2007
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1419
2007
MS 1138-1 : 2007 MS 1138-2 : 2007 MS 1138-3 : 2007 MS 1138-4 : 2007 MS 1419-2-6: 2007
Prestressing steel - Part 1: General requirements Prestressing steel - Part 2: Cold-drawn wire Prestressing steel - Part 3: Steel bars (Quenched and tempered) Prestressing steel - Part 4: Strand (First revision) Acrylonitrile Butadiene Styrene (ABS) piping systems for pressure applications - Part 2: Methods of test- Section 6: Method of determining the suitability of connection threads of BSP form
Malaysian Standard
RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 7 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
1419
2007
MS 1419-2-7: 2007
Acrylonitrile Butadiene Styrene (ABS) piping systems for pressure applications - Part 2: Methods of test- Section 7: Method for hydrostatic pressure testing of fittings
Malaysian Standard
RACK 1
MS
1419
2007
MS 1419-2-8: 2007
Acrylonitrile Butadiene Styrene (ABS) piping systems for pressure applications - Part 2: Methods of test- Section 8: Method for high temperature stress-relief testing of fittings
Malaysian Standard
RACK 1
MS
1936
2007
MS 1936 : 2007
Electrical installations of building - Guide to MS IEC 60364
MS
1963
2007
MS 1963: 2007
Air quality - determination of odour concentration by dynamic olfactometry
MS
1979
2007
MS 1979: 2007
Electrical installations of building - code of practice
MS
1402
2006
MS
1402
2006
MS
1402
2006
MS
1402
2006
MS
1447
2006
MS
1447
2006
MS
1447
MS
MS 1402-1: 2006 MS 1402-2: 2006
Code of practice for sanitary system in buildings - Part 1: Design (First revision) Code of practice for sanitary system in buildings - Part 2: Installation (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
MS 1402-3: 2006
Code of practice for sanitary system in buildings - Part 3: Testing and commissioning (First revision)
Malaysian Standard
MS 1402-4: 2006 MS 1447-1: 2006 MS 1447-2: 2006
Code of practice for sanitary system in buildings - Part 4: Operation and maintenance (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard
2006
MS 1447-3: 2006
Fixed firefighting systems - Hose systems Part 3: Maintenance of hose reels with semirigid hose and hose systems with lay-flat hose (First revision)
Malaysian Standard
RACK 1
145
2006
MS 145:2006
Welded steel fabric for the reinforcement of concrete - specification (Third revision)
Malaysian Standard
RACK 1
MS
146
2006
MS 146.2006
Hot rolled steel bars for the reinforcement of concrete - specification (Third revision)
Malaysian Standard
RACK 1
MS
1745
2006
MS 1745-13: 2006
Fire detection and fire alarm systems - Part 13: compactibility assessement of systems components (ISO 7240-13: 2005, IDT)
Malaysian Standard
RACK 1
MS
1910
2006
MS 1910 : 2006
Fixed Firefighting Systems – Automatic Sprinkler Systems – Design, Installation And Maintenance
MS
2015
2006
MS
2015
2006
MS
2015
2006
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS 2015-1 : 2006 MS 2015-3: 2006 MS 2015-4: 2006
Fixed firefighting systems - Hose systems Part 1: Hose reels with semi-rigid hose Fixed firefighting systems - Hose systems Part 2: Hose systems with lay-flat hose
Public toilets - Part 1: Minimum design criteria Public toilets - Part 3: Rating criteria Public toilets - Part 4: Code of practice for maintenance
RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 2 RACK 1 RACK 1
Page 8 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY] Malaysian Standard Malaysian Standard
MS
2021
2006
MS 2021: 2006
Safety rules for the construction and installation of electric lifts
MS
1056
2005
MS 1056-6 : 2005
Soils for civil engineering purposes - test method - Part 6: Consolidation and permeability tests in hydraulic cells and with pore pressure measurement
MS
1056
2005
Soils for civil engineering purposes - test method - Part 8: Shear strength tests (effective stress)
MS
1745
2005
MS 1056-8 : 2005 MS 1745-5: 2005
MS
1780
2005
MS 1780: 2005
Smoke control system using natural (displacement) or powered (extraction) ventilation
MS
1745
2004
MS
1745
2004
MS
1745
2004
MS
1760
2004
MS 1760: 2004
Guide on voltage dips and short interruptions on public electric power supply systems
MS
1227
2003
MS 1227 : 2003
Specification for portland pulverised fuel ash cement (First revision)
MS
1539
2003
MS 1539-3: 2003
Specification For Portable Fire Extinguishers – Part 3 : Selection And Installation – Code Of Practice (First Revision)
MS
1590
2003
MS 1590: 2003
Carbon dioxide extinguishing systems - design and installation
MS
1591
2003
MS 1591: 2003
Electrical apparatus for explose gas atmospheres - Part 16: Artificial ventilation for the protection of analyser(s) houses
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1592
2003
MS 1592: 2003
Electrical apparatus for explose gas atmospheres - Part 20: Data for flammable gases and vapours relating to the use of electrical apparatus
Malaysian Standard
RACK 1
MS
1712
2003
MS 1712: 2003
Electrical apparatus for explosive gas atmospheres - classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents (IEC/TR 60079-12: 1978, IDT)
Malaysian Standard
RACK 1
MS
1712
2003
MS 1713: 2003
Electrical apparatus for explosive gas atmospheres - construction and use of rooms or buildings protected by pressurisation (IEC/TR 60079-12: 1978, IDT)
Malaysian Standard
RACK 1
MS
1058
2002
MS 1058-1 : 2002
Specification for polyethylene (PE) piping systems for water supply: Part 1: General (Third revision)
Malaysian Standard
RACK 1
MS
1058
2002
MS 1058-2 : 2002
Specification for polyethylene (PE) piping systems for water supply: Part 2: Pipes (Third revision)
Malaysian Standard
RACK 1
MS
1219
2002
MS 1219-2: 2002
Safety of household and similar electrical appliances: Part 2: Particular requirements for fans (First revision)
Malaysian Standard
RACK 1
MS 1745-11: 2004 MS 1745-3: 2004 MS 1745-4: 2004
Fire detection and fire alarm systems - Part 5: Heat detector - point detectors
Fire detection and fire alarm systems - Part 11: Manual call points Fire detection and fire alarm systems - Part 3: Audible fire alarm devices Fire detection and fire alarm systems - Part 4: Power supply equipment
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 9 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
1513
2002
MS 1513-2-2: 2002
Packaging - transport of dangerous goods : Part 2: Classifications: Sub Part 2: Class 1 Explosives
Malaysian Standard
RACK 1
MS
1513
2002
MS 1513-2-8: 2002
Packaging - transport of dangerous goods : Part 2: Classifications: Sub Part 8: Class 8 Corrosive substances and Class 9 - Miscellaneous dangerous substances and articles
Malaysian Standard
RACK 1
MS
1513
2002
MS 1513-4-2: 2002
Packaging - transport of dangerous goods : Part 4: Packing and tank Provisions: Sub Part 2: Use of portable tanks and multiple-element gas containers (MEGCs)
Malaysian Standard
RACK 1
MS
1513
2002
MS 1513-5-4: 2001
Packaging - transport of dangerous goods : Part 5: Consigment procedures : Sub-Part 4: Special provisions
Malaysian Standard
RACK 1
Packaging - transport of dangerous goods : Part 6: Requirements for the construction and testing of packagings, intermediate bulk container (IBCs), large packings and portable tanks: Sub-Part 4: Requirements for the design, construction, inspection and testing of portable tanks and multiple-element gas containers (MEGCs)
Malaysian Standard
RACK 1
MS
1513
2002
MS 1513-6-4: 2002
MS
1513
2002
MS 1513-7: 2002
Packaging - transport of dangerous goods : Part 7: Provisions concerning transport operations
Malaysian Standard
RACK 1
MS
1532
2002
MS 1532: 2002
Thermal insulation - determination of steady state thermal transmission properties calibrated and grounded hot box (ISO 8990: 1994, MOD)
Malaysian Standard
RACK 1
MS
1534
2002
MS 1534-1: 2002
Specification for conduit systems for electrical installations: Part 1: General requirements
Malaysian Standard
RACK 1
MS
1534
2002
MS 1534-2: 2002
Specification for conduit systems for electrical installations: Part 2: Rigid conduit systems
Malaysian Standard
RACK 1
MS
1536
2002
MS 1536-1: 2002
Information Technology - guidelines for the management of IT Security : Part 1: Concepts and models for IT Security
Malaysian Standard
RACK 1
MS
1536
2002
MS 1536-2: 2002
Information technology - guidelines for the management of IT Security : Part 2: Managing and planning IT Security
Malaysian Standard
RACK 1
MS
1536
2002
MS 1536-3: 2002
Information technology - guidelines for the management of IT Security : Part 3: Techniques for the management of IT Security
Malaysian Standard
RACK 1
MS
1536
2002
MS 1536-4: 2002
Information technology - guidelines for the management of IT Security : Part 4: Selection of safeguards
Malaysian Standard
RACK 1
MS
1537
2002
MS 1537: 2002
Information Security Management: Specification for information security management systems
MS
1538
2002
MS 1538: 2002
Specification for speed monitoring device for road vehicles
MS
1539
2002
Specification For Portable Fire Extinguishers: Part 1: Construction And Testing Methodology
MS
1552
2002
MS 1539-1: 2002 MS 1552-1: 2002
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
Specification for raised access floor system: Part 1: General requirements
RACK 1 RACK 1 RACK 1 RACK 1
Page 10 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY] Malaysian Standard Malaysian Standard Malaysian Standard
MS
1553
2002
MS 1553: 2002
Code of practice on wind loading for building structure
MS
221
2002
MS 221:2002
Specification for ISO metric screw threads (First revision)
MS
1064
2001
MS 1064-1 : 2001
Guide to modular coordination in buildings: Part 1: General principles (First revision)
MS
1064
2001
MS 1064-10 : 2001
Guide to modular coordination in buildings: Part 10: Coordinating sizes and preferred sizes for reinforced concrete components
Malaysian Standard
RACK 1
MS
1064
2001
MS 1064-2 : 2001
Guide to modular coordination in buildings: Part 2: Storey heights and room heights (First revision)
Malaysian Standard
RACK 1
MS
1064
2001
MS 1064-4 : 2001
Guide to modular coordination in buildings: Part 4: Coordinating sizes and preferred sized for doorsets (First revision)
Malaysian Standard
RACK 1
MS
1064
2001
MS 1064-5 : 2001
Guide to modular coordination in buildings: Part 5: Coordinating sizes and preferred sizes for windowsets
Malaysian Standard
RACK 1
MS
1064
2001
MS 1064-6 : 2001
Guide to modular coordination in buildings: Part 6: Coordinating sizes and preferred sizes for rigid flat sheets (First revision)
Malaysian Standard
RACK 1
MS
1064
2001
MS 1064-7 : 2001
Guide to modular coordination in buildings: Part 7: Coordinating sizes and preferred sizes for tiles
Malaysian Standard
RACK 1
MS
1064
2001
MS 1064-8 : 2001
Guide to modular coordination in buildings: Part 8: Coordinating sizes and preferred sizes for masonry bricks and blocks
Malaysian Standard
RACK 1
MS
1064
2001
MS 1064-9 : 2001
Guide to modular coordination in buildings: Part 9: Coordinating sizes and preferred sizes for cabinets
Malaysian Standard
RACK 1
MS
1220
2001
MS 1220 : 2001
Performance and construction of electric circulating fans and regulators (First revision) (IEC 60879: 1986, MOD)
MS
147
2001
MS 147:2001
Specification for quality of vitreous China sanitary appliances (First revision)
MS
1490
2001
MS 1490 : 2001
Specification for hot rolled non-alloy structural steel sections and H-Piles (First Revision)
Malaysian Standard Malaysian Standard Malaysian Standard
MS
1513
2001
MS 1513-5-1: 2001
Packaging - transport of dangerous goods : Part 5: Consigment procedures : Sub-Part 1: General provisions
Malaysian Standard
RACK 1
MS
1513
2001
MS 1513-5-2: 2001
Packaging - transport of dangerous goods : Part 5: Consigment procedures : Sub-Part 2: Marking, labelling and placarding
Malaysian Standard
RACK 1
2001
MS 1513-6-2: 2001
Packaging - transport of dangerous goods : Part 6: Requirements for the construction and testing of packagings, intermediate bulk container (IBCs), large packings and portable tanks: Sub-Part 2: Requirements for the construction and testing of intermediate bulk containers
Malaysian Standard
RACK 1
MS
1513
RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1
Page 11 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY] Packaging - transport of dangerous goods : Part 6: Requirements for the construction and testing of packagings, intermediate bulk container (IBCs), large packings and portable tanks: Sub-Part 3: Requirements for the construction and testing of large packings
MS
1513
2001
MS 1513-6-3: 2001
Malaysian Standard
MS
1520
2001
MS 1520: 2001
Specification for pozzolanic pulverised fuel ash cement
MS
1522
2001
MS 1522 : 2001
Specification for vitrerous China Water Closet pans (First revision)
MS
1525
2001
MS 1525: 2001
Code of practice on energy efficiency and use of renewable energy for non residential buildings
MS
183
2001
MS 183:2001
Specification for industrial safety helmet (First revision)
MS
1061
1999
MS 1061-1 : 1999
Vitrified clay pipes and fittings and pipe joints for drains and sewers : Part 1: Requirements (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1061
1999
MS 1061-2 : 1999
Vitrified clay pipes and fittings and pipe joints for drains and sewers : Part 2: Quality control and sampling
Malaysian Standard
MS
1061
1999
MS 1061-3 : 1999
Vitrified clay pipes and fittings and pipe joints for drains and sewers : Part 3: Test methods
MS
1447
1999
MS 1447 : 1999
Specification for fixed firefighting systems - Hose reels with semi-rigid hose
MS
1460
1999
MS 1460 : 1999
Code of practice on resistibility of telecommunication equipment to overvoltages and overcurrents
MS
1461
1999
MS 1461: 1999
Specification for draw off taps with metal bodies for water services
MS
1475
1999
MS 1475: 1999
Cylinder for liquefied gases (exclusing acetylene and LPG) - Inspection at time of filling (ISO 11113: 1995, IDT)
MS
1487
1999
MS 1487 : 1999
Electrotechnical Vocabulary : Chapter 121: Electromagnetism
MS
1144
1998
MS 1144 : 1998
General requirements for electrical accessories (First revision)
MS
1419
1998
MS 1419-4: 1998
Specification for Acrtlonitrile Butadiene Styrene (ABS) pipes and fittings for pressure applications Part 4: Guides for installation of ABS pipe systems
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1096
1997
MS 1096 : 1997
Code of practice for the use of CNG fuel in internal combustion engines (First revision)
Malaysian Standard
RACK 1
MS
1419
1997
MS 1419-3: 1997
Specification for Acrtlonitrile Butadiene Styrene (ABS) pipes and fittings for pressure applications Part 3: Solvent cement and priming (cleaning) fluids for use with ABS pipes and fittings
Malaysian Standard
RACK 1
MS
1
1996
MS 1:1996
Specification for protective helmets for vehicle users (second revision)
MS
1396
1996
MS 1396: 1996
Specification for rerrulers
Malaysian Standard Malaysian
RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1
Page 12 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY] Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1402
1996
MS 1402 : 1996
Code of practice for sanitary system in buildings
MS
277
1996
MS 277:1996
Specification for motorcycle batteries (Second revision)
MS
1057
1995
MS 1057 : 1995
Specification for adjustable louvre windows (First revision)
MS
136
1995
MS 136:1995
Specification for PVC-insulted cables (non-armoured) for electrical power and lighting (second revision)
MS
138
1995
MS 138:1995
Specification for PVC insulation and sheath of electric cables (second revision)
MS
1380
1995
MS 1380: 1995
Specification for precast concrete paving blocks
MS
1387
1995
MS 1387: 1995
Specification for ground granulated blastfurnace slag for use with portland cement
MS
1389
1995
MS 1389: 1995
Specification for portland blastfurnace cement
MS
1390
1995
MS 1390: 1995
Specification for glass reinforced polyester panels & panel water tanks
MS
274
1995
MS 274:1995
Specification for PVC-insulted cables for electricity supply
MS
30
1995
MS 30-1:1995
Methods of testing aggregates Part 1: General requirements for apparatus and calibration in coarse aggregate
MS
30
1995
MS 30-11:1995
Methods of testing aggregates Part 11: Methods of the determination of resistance to degradation of coarse aggregate by abrasion and impact in the los angeles machine (First revision)
Malaysian Standard
RACK 1
MS
30
1995
MS 30-12:1995
Methods of testing aggregates Part 12: Methods for the determination of the polishedstoned value (First revision)
Malaysian Standard
RACK 1
MS
30
1995
MS 30-13:1995
Methods of testing aggregates Part 13: Methods for determination of water-soluble chloride salts
Malaysian Standard
RACK 1
MS
30
1995
MS 30-14:1995
Methods of testing aggregates Part 14: Methods for determination of sulphate content
Malaysian Standard
RACK 1
MS
1347
1994
MS 1347-1: 1994
Code of practice for cathodic protection Part 1: Code of practice for land and marine applications
MS
1350
1994
MS 1350: 1994
Specification for natural mineral water
MS
1368
1994
MS 1368: 1994
Information processing - Jawi character set for information interchange
MS
1268
1993
MS 1268-1: 1993
Method of test for flexible cellular materials - combustibility requirements: Part 1: methods of test for the ignitability by smokers' materials of upholstered composites for seating
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1
Page 13 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
1294
1993
MS 1294-2: 1993
Wall and floor tiling Part 2: Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience slabs
Malaysian Standard
RACK 1
MS
1294
1993
MS 1294-3: 1993
Wall and floor tiling Part 3: Code of practice for the design and installation of ceramic floor and mosaics
Malaysian Standard
RACK 1
MS
1294
1993
MS 1294-4: 1993
Wall and floor tiling Part 4: Code of practice for tiling and mosaics in specific conditions
MS
1313
1993
MS 1313: 1993
Code of practice on large prefabricated panels
MS
1317
1993
MS 1317-1: 1993
Recommended practice for radiographic examination of fusion welded joints Part 1: Fusion welded butt joints in steel plates up to and including 50 mm thick
Malaysian Standard Malaysian Standard Malaysian Standard
MS
1317
1993
MS 1317-2: 1993
Recommended practice for radiographic examination of fusion welded joints Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
Malaysian Standard
RACK 1
MS
141
1993
MS 141-1:1993
Specification for ballasts for tubular fluorescent lamps: Part 1: General and safety requirements (First revision)
Malaysian Standard
RACK 1
MS
141
1993
MS 141-2:1993
Specification for ballasts for tubular fluorescent lamps: Part 2: Performance requirements
MS
1042
1992
MS 1042-4 : 1992
Code of practice for safety in laboratories Part 4: Ionizing radiations
MS
1074
1992
MS 1074 : 1992
Code of practice for the exchange of digital feature coded mapping data
MS
1265
1992
MS
1265
1992
Guidelines for irradiation of foods Part 2: Irradiation of bulb and tuber crops to inhibit sprouting
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1265
1992
MS 1265-3: 1992
Guidelines for irradiation of foods Part 1: Irradiation of fresh fruits for insect disinfestation (as a quarantine treatment)
Malaysian Standard
RACK 1
MS
1265
1992
MS 1265-4: 1992
Guidelines for irradiation of foods Part 4: Irradiation of cereal grans for insect disinfestation
Malaysian Standard
RACK 1
MS
1265
1992
MS 1265-5: 1992
Guidelines for irradiation of foods Part 5: Irradiation of dried fish and dried salted fish for insect disinfectation
Malaysian Standard
RACK 1
MS
1265
1992
MS 1265-6: 1992
Guidelines for irradiation of foods Part 6: Irradiation of bananas, mangoes and papayas for shelf life extension (by delay of ripening)
Malaysian Standard
RACK 1
MS
1265
1992
MS 1265-7: 1992
Guidelines for irradiation of foods Part 7: Irradiation of fresh fish and shrimps stored under refrigeration and for frozen frog legs and shrimps (to control microflora)
Malaysian Standard
RACK 1
MS
1265
1992
MS 1265-8: 1992
Guidelines for irradiation of foods Part 8: Irradiation of fresh and frozen red meats and poultry (to control pathogens)
Malaysian Standard
RACK 1
MS 1265-1: 1992 MS 1265-2: 1992
Guidelines for irradiation of foods Part 1: General
RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 14 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
1277
1992
MS 1277 : 1992
Information processing - guidelines for the documentation of computers based application systems
Malaysian Standard
RACK 1
MS
1278
1992
MS 1278 : 1992
Information processing systems user documentation and cover information for consumer software packages
Malaysian Standard
RACK 1
MS
1292
1992
MS 1292 : 1992
Specification for rubber seals - water stops for sealing joints in concrete - specification of materials
Malaysian Standard
RACK 1
MS
1293
1992
MS 1293-1: 1992
Specification for precast reinforced concrete box culverts Part 1: Small culverts (not exceeding 1800 mm width and 1800 mm depth with a maximum backfill depth of 2 m inclusive pavement, if any)
Malaysian Standard
RACK 1
MS
1294
1992
MS 1294-1: 1992
Wall and floor tiling Part 1: Code of practice for the design and installation of internal ceramic wall tiling and mosaics in normal conditions
MS
1296
1992
MS 1296 : 1992
Specification for fibre cement flat sheets
MS
1297
1992
MS 1297 : 1992
Specification for fire and burglary resistant office safes
MS
1042
1991
MS
1193
1991
MS
1193
1991
MS
1195
1991
MS
1195
1991
MS
1195
1991
MS
1201
MS
MS 1042-6 : 1991 MS 1193-1 : 1991
Code of practice for safety in laboratories Part 6: Mechanical aspects Specification for devices without moving parts for the prevention of contamination of water by backflow Part 1: Specification for type A air gaps
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS 1193-2 : 1991 MS 1195-1 : 1991 MS 1195-2 : 1991 MS 1195-3 : 1991
Specification for devices without moving parts for the prevention of contamination of water by backflow Part 2: Specification for type B air gaps
1991
MS 1201 : 1991
Specification for information processing - Programming languages - Minimal basic
1202
1991
MS 1202 : 1991
Specification for current transformers
MS
1203
1991
MS 1203 : 1991
Specification for brushcutters - Safety requirements
MS
1206
1991
MS 1206-1 : 1991
Specification for qualification for welders - fusion welding Part 1: Steels
MS
1207
1991
MS 1207 : 1991
Methods for test for the determination of exhaust carbon monoxide at idle speed for motor vehicles
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1211
1991
MS 1211 : 1991
Method of test for the determination of the burning behaviour of interior materials of motor vehicles
Malaysian Standard
Code of practice for structural use of concrete Part 1: Design and construction Code of practice for structural use of concrete Part 2: Special circumstances Code of practice for structural use of concrete Part 3: Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 15 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
1213
1991
MS 1213 : 1991
Method of test for the measurement of noise emitted by accelerating motor vehicles engineering method
MS
1214
1991
MS 1214 : 1991
Method for test for the measurement of noise emitted by stationary motor vehicles
MS
1216
1991
MS 1216 : 1991
Specification for retroflective sign face materials
MS
1224
1991
MS 1224 : 1991
Specification for fibre cement symmetrically corrugated sheet and fittings
MS
1225
1991
MS 1225 : 1991
Specification for cold water storage and feed and expansion cisterns (polyolefin or olefin copolymer) and cistern lids
MS
1226
1991
MS 1226-1 : 1991
Pulverized-fuel ash Part 1. Specification for pulverized-fuel ash for use as a cementitious component in structural concrete
MS
1237
1991
MS 1237 : 1991
Specification for general purpose galvanized steel wire strand
MS
1238
1991
MS 1238 : 1991
Specification for galvanized steel wire for aluminium conductors, steel-reinforced
MS
1239
1991
MS 1239 : 1991
Specification for galvanized low carbon steel wire for armouring cables
MS
1240
1991
MS 1240 : 1991
Specification for galvanized steel wire for armouring submarine cables
MS
1241
1991
MS 1241 : 1991
Specification for fibreglass water tanks effective capacity of less than 2000 litres
MS
1242
1991
MS 1242 : 1991
Malaysian Standard guide to assessment of concrete strength in existing structures
MS
1243
1991
MS 1243 : 1991
Technical specifications for carbon monoxide analyser equipment for motor vehicles
MS
26
1991
MS 26: Part 3: 1991
Methods of testing concrete Part 2 : Methods of testing hardened concrete (First revision)
MS
1177
1990
MS 1177 : 1990
Guide to the determination and use of quality related costs
MS
1178
1990
MS 1178 : 1990
Drafting specification based on limiting the number of defectives permitted in small samples
MS
1180
1990
MS
1181
1990
MS
1182
1990
MS 1182 : 1990
Classification of fires
MS
1183
1990
MS 1183-5 : 1990
Code of practice for fire precautions in the design and construction of buildings Part 5: Firefighting stairways and lifts
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1188
1990
MS 1188 : 1990
Specification for correction fluid, white opaque and thinner
Malaysian
MS 1180-3 : 1990 MS 1181-1 : 1990
Fire extinguishing media Part 3: Specification for powder Recharging fire extinguishers Part 1: Specification for procedure and materials
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 16 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
1190
1990
MS 1190 : 1990
Specification for carbonless paper or no carbon required (NCR) paper
MS
1134
1989
MS 1134 : 1989
Method for representing SI and other units in information processing systems with limited character sets
MS
1136
1989
MS 1136 : 1989
Method of test for backsiphonage in water using appliance
MS
1140
1989
MS 1140 : 1989
Specification for information processing, flowchart symbols, rules and conventions
MS
1141
1989
MS 1141 : 1989
Specification for portable cable reels for household and similar purposes
MS
1142
1989
MS 1142 : 1989
Specification for hard-drawn copper and copper cadmium conductors for overhead power transmission purposes
MS
1143
1989
MS 1143 : 1989
Specification for aluminium alloy stranded conductor for overhead power transmission
MS
1159
1989
MS 1159 : 1989
Specification for pencils
MS
1160
1989
MS 1160 : 1989
Specification for school chalks
MS
1163
1989
MS 1163 : 1989
Specification for rubber erasers
MS
1165
1989
MS 1165 : 1989
Specification for pressure regulators and automatic changeover devices for liquefied petroleum gases
MS
1103
1988
MS 1103 : 1988
Methods for determination of water using Karl Fischer Reagent
MS
1108
1988
MS 1108 : 1988
Specification for suspension coil springs for automotive use
MS
229
1988
MS 229:1988
Nomenclature and uses of commercial timbers of Malaysia (First revision)
MS
1085
1987
MS 1085 : 1987
Code of practice for the installation of buried unplasticised PVC pipework for gravity sewers
MS
1087
1987
MS 1087 : 1987
Code of practice for laying and field pressure testing of asbestos cement pipelines
MS
1089
1987
MS 1089 : 1987
Specification for extruded ceramic floor tiles
MS
1091
1987
MS
1091
1987
MS
1091
1987
MS 1091-3 : 1987 MS 1091-4 : 1987 MS 1091-8 : 1987
Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
Methods of test for ceramic tiles Part 4: Determination of scratch hardness of surface according to mohs
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
Methods of test for ceramic tiles Part 8: Determination of chemical resistance of unglazed tiles
Malaysian Standard
Methods of test for ceramic tiles Part 3: Determination of modulus of rupture
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 17 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
1092
1987
MS 1092 : 1987
Specification for low carbon steel wire rods
MS
1093
1987
MS 1093 : 1987
Specification for high carbon steel wire rods
MS
1094
1987
MS 1094 : 1987
Specification for cast iron fittings for asbestos cement pressure pipe
MS
1095
1987
MS 1095 : 1987
Methods of test for insulation and sheaths of electrical cables
MS
1098
1987
MS 1098 : 1987
Safe storage and handling information cards for dangerous goods
MS
140
1987
MS 140:1987
Specification for insulted flexible cords and cables (First revision)
MS
276
1987
MS 276:1987
Specification for rubber insulation and sheath of electric cables (First revision)
MS
278
1987
MS 278:1987
Specification for rubber insulated cables for electric power and lighting (first revision)
MS
1010
1986
MS 1010 : 1986
Specification for rigid poly (vinyl chloride) and related plastic pipe and fitting compounds
MS
1017
1986
MS 1017-1 : 1986
Specification for aluminium framed sliding glass doors Part 1: Single glazed doors
MS
1020
1986
MS 1020 : 1986
Specification for mineral fibre thermal insulation material
MS
1021
1986
MS 1021 : 1986
Guide for construction of electrical equipment for protection against electrical shock
MS
1022
1986
MS 1022 : 1986
Specification for stopvalves for water services (Screwdown pattern)
MS
1023
1986
MS 1023 : 1986
Specification for identification of the contents of industrial gas containers
MS
1035
1986
MS 1035 : 1986
Code of practice for unplasticized PVC pipework for the conveyance of liquid under pressure
MS
1037
1986
MS 1037 : 1986
Specification for sulphate-resisting Portland cement
MS
1039
1986
MS 1039 : 1986
Specification for alternating current switches of rated voltage above one kilovolt
MS
1042
1986
MS
1042
1986
MS
1042
1986
MS
1045
1986
MS 1042-1 : 1986 MS 1042-2 : 1986 MS 1042-3 : 1986 MS 1045 : 1986
Code of practice for safety in laboratories Part 1: General Code of practice for safety in laboratories Part 2: Chemical Code of practice for safety in laboratories Part 3: Microbiology Methods of measuring drying shrinkage of mortar containing hydraulic cement
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 18 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
1046
1986
MS 1046 : 1986
Glossary of welding terms, including terms for brazing, soldering, thermal spraying and thermal cutting
Malaysian Standard
MS
1049
1986
MS 1049 : 1986
Specification for double flanged cast iron wedge gate (sluice) valves for waterworks purposes
MS
1059
1986
MS 1059 : 1986
Specification for asbestos - cement sewer pipes, joints and fittings
MS
1060
1986
MS 1060 : 1986
Specification for mortice locks for use in buildings
MS
1062
1986
MS 1062 : 1986
Specification for bored locks and latches for building
MS
28
1985
MS 28:1985
Methods of test for water for making concrete (First revision)
MS
213
1984
MS 213-2:1984
Data on shielding from ionizing radiation Part 2: Shielding from X-radiation
MS
279
1983
MS 279:1983
Specification for capacitors for use in tubular fluorescent, high-pressure mercury and low-pressure sodium vapour discharge lamp circuits (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
275
1975
MS 275-1:1975
Specification for steel conduits & fittings with metric threads of ISO form for electrical installations Part 1: Steel conduits, bends & couplers (internationally acceptable sizes)
Malaysian Standard
RACK 1
MS
275
1975
MS 275-2:1975
Specification for steel conduits & fittings with metric threads of ISO form for electrical installations Part 2: Fittings and components (non-internationally acceptable sizes)
Malaysian Standard
RACK 1
MS
280
1975
MS 280:1975
Specification for copper for electrical purposes, wire for general electrical purposes for insulated cables and flexible cords
MS
212
1974
MS 212: 1974
Specification for symbol for ionizing radiation
MS
217
1974
MS 217: 1974
Method for the hydrostatic stretch testing of liquefiable and other compressed gas cylinders
MS
137
1973
MS 137:1973
Specification for PVC-insulted cables for switchgear and control gear wiring
MS
142
1973
MS 142:1973
Specification for precautions with respect to possible hazards when dealing with electronic equipment and equipment employing similar techniques
MS
1405
2008
MS 1405: 2008
Coding systems for plastics products (First revision)
MS
1477
2008
MS 1477: 2008
Plastics - Polyethylene film and sheeting - Specification (First Revision)
MS
1478
2008
MS 1478: 2008
Plastics - Low density polyethylene films for general use and packaging applications Specification (First revision)
MS
2076
2008
MS 2076: 2008
Practice for sampling with a scoop
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 19 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
1419
2007
MS 1419-2-5: 2007
Acrylonitrile Butadiene Styrene (ABS) piping systems for pressure applications - Part 2: Methods of test - Section 5: Method for high temperature testing of pipe
Malaysian Standard
RACK 1
MS
1513
2003
MS 1513-2-4: 2003
Packaging - transport of dangerous goods : Part 2: Classifications: Sub Part 4: Class 3Flammable liquids
Malaysian Standard
RACK 1
MS
1513
2003
MS 1513-2-6: 2003
Packaging - transport of dangerous goods : Part 2: Classifications: Sub Part 6: Class 5Oxising substances and organic peroxides
Malaysian Standard
RACK 1
MS
1513
2002
MS 1513-2-1: 2002
Packaging - transport of dangerous goods : Part 2: Classifications: Sub Part 1: Introduction
Malaysian Standard
RACK 1
MS
1540
2002
MS 1540: 2002
Specification for the material, marking and dimensions of crimp type cable lugs for use with copper conductors in low voltage applications
Malaysian Standard
RACK 1
MS
1481
2001
MS 1481: 2001
Multiple payment order message (paymul) for the payment of customs duty (First revision)
Malaysian Standard
RACK 1
MS
1482
2001
MS 1482: 2001
Banking status message (BANSTA) for the payment of customs duty (First revision)
Malaysian Standard
RACK 1
MS
1483
2001
MS 1483: 2001
Multiple credit advice message (cremul) for the payment of customs duty (First revision)
Malaysian Standard
RACK 1
MS
1484
2001
MS 1484: 2001
Multiple debit advice message (debmul) for the payment of customs duty (First revision)
Malaysian Standard
RACK 1
MS
1485
2001
MS 1485: 2001
International Movement of Goods Governmental Regulatory (SANCRT) by the Customs (First Revision)
MS
1486
2001
MS 1486 : 2001
Vocabulary on United Nations Standards Message (UNSM) (First Revision)
MS
1491
2001
MS 1491 : 2001
Dimensions, mass and tolerances of hot rolled non-alloy structural steel sections and HPiles (First Revision)
Malaysian Standard Malaysian Standard Malaysian Standard
MS
1513
2001
MS 1513-1-2: 2001
Packaging - transport of dangerous goods : Part 1: General provisions, definitions and training: Sub Part 2: Definitions and units of mearsurement
Malaysian Standard
RACK 1
MS
1513
2001
MS 1513-1-3: 2001
Packaging - transport of dangerous goods : Part 1: General provisions, definitions and training: Sub Part 3: Training
Malaysian Standard
RACK 1
MS
1513
2001
MS 1513-2-3: 2001
Packaging - transport of dangerous goods : Part 2: Classifications: Sub Part 3: Class 2 Gases
Malaysian Standard
RACK 1
MS
1513
2001
MS 1513-6-1: 2001
Packaging - transport of dangerous goods : Part 6: Sub-Part 1: Requirements for the construction and testing of packing for dangerous goods
MS
1506
2000
MS 1506 : 2000
Specification for wooden door
MS
1508
2000
MS 1508 : 2000
Specification for wooden door frame
MS
1464
1999
MS 1464: 1999
Vocabulary on Gas Cylinder
MS
1471
1999
MS 1471-1:
Vocabulary on Fire Protection Part 1: General terms and phenomena of fire
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian
RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 20 of 73
March 14, 2017 1999 MS 1471-2: 1999 MS 1471-4: 1999 MS 1471-5: 1999 MS 1471-6: 1999 MS 1471-7: 1999 MS 1471-8: 1999
[MALAYSIAN STANDARD – IEM LIBRARY]
Vocabulary on Fire Protection Part 2: Structural fire protection
Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
1471
1999
MS
1471
1999
MS
1471
1999
MS
1471
1999
MS
1471
1999
MS
1471
1999
MS
1474
1999
MS 1474: 1999
Cylinder for permanent gases - Inspection at time of filling (ISO 10463: 1993, IDT)
Malaysian Standard
RACK 1
MS
1445
1998
MS 1445-1: 1998
Low voltage switchgear and controlgear assemblies : Part 1: Type-tested and partially type-tested assemblies
Malaysian Standard
RACK 1
MS
1445
1998
MS 1445-3: 1998
Low voltage switchgear and controlgear assemblies : Part 1: Particular requirements for low voltage switchgear and controlgear assemblies intended to be installaed in places where unskilled persons have access for their use - distribution boards
Malaysian Standard
RACK 1
MS
1417
1997
MS 1417: 1997
Measurement of water flow in closed conduits - meters for cold portable water Part 1: Specification
Malaysian Standard
RACK 1
MS
1419
1997
MS 1419-1: 1997
Specification for acrylonitrile butadiene styrene (ABS) pipes and fittings for presure applications Part 1: Pipes
Malaysian Standard
RACK 1
MS
1419
1997
MS 1419-2: 1997
Specification for acrylonitrile butadiene styrene (ABS) pipes and fittings for presure applications Part 2: Solvent cement fittings
Malaysian Standard
RACK 1
MS
1426
1997
MS 1426: 1997
Residual current operated circuit - breakers without integral overcurrent protection for household and similar uses (RCCB's) Part 1: General rules
Malaysian Standard
RACK 1
MS
1426
1997
MS 1426-2-1: 1997
Residual current operated circuit - breakers without integral overcurrent protection for household and similar uses (RCCB's) Part 2-1: Applicability of the general rules to RCCB's functionally dependent of line voltage
Malaysian Standard
RACK 1
MS
1426
1997
MS 1426-2-2: 1997
Residual current operated circuit - breakers without integral overcurrent protection for household and similar uses (RCCB's) Part 2-2: Applicability of the general rules to RCCB's functionally dependent on line voltage
Malaysian Standard
RACK 1
MS
1428
1997
MS 1428: 1997
Specification for general purpose fude links for domestic and similar purposes (primarily for use in plugs)
MS
1403
1996
MS 1403: 1996
Electricity generating sets portable (up to 5kW)
Vocabulary on Fire Protection Part 4: Fire extinction equipment Vocabulary on Fire Protection Part 5: Smoke control Vocabulary on Fire Protection Part 6: Evacuation and means of escape Vocabulary on Fire Protection Part 7: Explosion detection and surpression means Vocabulary on Fire Protection Part 8: Terms specific to fire fighing rescue services and handling hazardous materials
Malaysian Standard Malaysian Standard
RACK 1 Rack 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1
Page 21 of 73
March 14, 2017 MS 1404-4: 1996 MS 1471-3: 1999
[MALAYSIAN STANDARD – IEM LIBRARY] Fire detection and alarm system for building Part 4: Specification for control and indicationf equipment
Malaysian Standard Malaysian Standard
MS
1404
1996
MS
1471
1999
MS
30
1995
MS 30-15:1995
Methods of testing aggregates Part 15: Methods for determination of acid-soluble material in fine aggregates
Malaysian Standard
MS
30
1995
MS 30-16:1995
Methods of testing aggregates Part 16: Methods for testing and classifying drying shrinkage of aggregates in concrete
MS
30
1995
MS 30-17:1995
Methods of testing aggregates Part 17: Methods for determination of soundness
MS
30
1995
MS 30-3:1995
Methods of testing aggregates Part 3: Methods for sampling (First revision)
MS
30
1995
MS 30-4:1995
Methods of testing aggregates Part 4: Methods for determination of particle size distribution (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
30
1995
MS 30-5:1995
Methods of testing aggregates Part 5: Methods for determination of particle shape (First revision)
Malaysian Standard
RACK 1
MS
30
1995
MS 30-6:1995
Methods of testing aggregates Part 6: Method for determination of shell content in coarse aggregate (First revision)
Malaysian Standard
RACK 1
MS
30
1995
MS 30-7:1995
Methods of testing aggregates Part 7: Methods for determination of moisture content (First revision)
Malaysian Standard
RACK 1
MS
30
1995
MS 30-8:1995
Methods of testing aggregates Part 8: Methods for determination of aggregate crushing value (ACV) (First revision)
Malaysian Standard
RACK 1
MS
30
1995
MS 30-9:1995
Methods of testing aggregates Part 9: Methods for determination of ten per cent fines value (TFV) (First revision)
Malaysian Standard
RACK 1
MS
399
1976
MS 399:1976
Specification for radio interference limits for the electrical ignition systems of internal combustion engines
Malaysian Standard
RACK 1
MS
406
1996
MS 406:1996
Specification for voltages and frequency for alternating current transmission and distribution systems (Second revision)
MS
407
1991
MS 407:1991
Specification for zinc coatings on steel wire (First revision)
MS
408
1976
MS 408:1976
Code of practice for laying of resilient title and sheet flooring
MS
415
1976
MS 415-1:1976
Code of practice for composite construction in structural steel and concrete Part 1: Simply supported beams in building
MS
416
1976
MS 416:1976
Code of practice for the use of structural steel in building
MS
426
1994
MS 426:1994
Code of practice for safety and health at work (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
Vocabulary on Fire Protection Part 3: Fire detection and alarm
RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 22 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
433
1976
MS 433:1976
Specification for separators for lead-acid batteries
MS
434
1976
MS 434:1976
Specification for wrought aluminium for electrical purposes solid conductors for insulated cables
MS
435
1976
MS 435:1976
Specification for wrought aluminium for electrical purposes wire
MS
45
1991
MS 45:1991
Specification for batteries for automobiles (First revision)
MS
45
2009
MS 45:2009
Lead-acid starter batteries for automobiles - specification (Second revision)
MS
472
1976
MS 472-22.1:1976
Specification for testing and approval of household and similar electrical appliances. Particular requirements for ranges
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
472
1987
MS 472-22.10:1987
Specification for testing and approval of household and similar electrical appliances Part 2: Particular requirements Section 2.10: Room air conditioners
Malaysian Standard
RACK 1
MS
472
1987
MS 472-22.11:1987
Specification for testing and approval of household and similar electrical appliances Part 2: Particular requirements Section 2.11: Floor treatment and wet scrubbing machines for household and similar purposes
Malaysian Standard
RACK 1
MS
472
1981
MS 472-22.4:1981
Specification for testing and approval of household and similar electrical appliances: Part 2: Particular requirements for liquid heating appliances
Malaysian Standard
RACK 1
MS
472
1983
MS 472-22.9:1983
Specification for testing and approval of household and similar electrical appliances: Part 2: Section 2.9: Particular requirements for rice cooker
Malaysian Standard
RACK 1
MS
472
1986
MS 472-33.1:1986
Specification for safety of household and similar electrical appliances Part 3: Complete particular specifications Section 3.1: Stationary instantaneous water heaters
Malaysian Standard
RACK 1
MS
477
1977
MS 477:1977
Code of practice for protection of electrical power equipment against climatic conditions
MS
488
1976
MS 488:1976
Specification for edison screw lampholders
MS
490
1977
MS 490:1977
Code of practice for guarding and safe use of metal working power presses
MS
491
1977
MS 491:1977
Code of practice for guarding and safe use of woodworking machinery
MS
510
1977
MS 510:1977
Specification for water for laboratory use
MS
518
1989
MS 518:1989
Specification for covered carbon steel arc welding electrodes (First revision)
MS
520
1989
MS 520:1989
Specification for carbon steel electrodes and roads for use with gas shielded arc welding (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
521
1986
MS 521:1986
Specification for general purpose transmission precision roller chains and chainwheels (First revision)
Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 23 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
522
1989
MS 522-1:1989
Specification for portland cement (ordinary and rapid-hardening) Part 1: standard specification (First revision)
Malaysian Standard
RACK 1
MS
522
1989
MS 522-2:1989
Specification for portland cement (ordinary and rapid-hardening) Part 2: physical tests (First revision)
Malaysian Standard
RACK 1
MS
522
1989
MS 522-3:1989
Specification for portland cement (ordinary and rapid-hardening) Part 3: Chemical analysis (First revision)
Malaysian Standard
RACK 1
MS
523
2005
MS 523-1:2005
Concrete - Part 1: Specification, performance, production and conformity (Second revision)
Malaysian Standard
RACK 1
MS
523
2011
MS 523-2:2011
Concrete - Part 2: Method of specifying and guidance for the specifier (Second revision)
Malaysian Standard
RACK 1
MS
523
2010
MS 523-3:2010
Concrete - Part 3: Specification for constituent materials and concrete (Second revision)
Malaysian Standard
RACK 1
MS
524
1984
MS 524:1984
Specification for asbestos cement symmetrically corrugated sheets (First revision)
MS
525
1986
MS 525:1986
Specification for concrete porous pipes for under drainage (First revision)
MS
544
2001
MS 544-111:2001
Code of practice for structural use of timber: Part 11: Recommended span tables and their calculations: Section 1: Domestic floor joists
Malaysian Standard Malaysian Standard Malaysian Standard
MS
544
2001
MS 544-112:2001
Code of practice for structural use of timber: Part 11: Recommended span tables and their calculations: Section 2: Ceiling joists
Malaysian Standard
RACK 1
MS
544
2001
MS 544-113:2001
Code of practice for structural use of timber: Part 11: Recommended span tables and their calculations: Section 3: Ceiling binders
Malaysian Standard
RACK 1
MS
544
2015
MS 544-11-4: 2015
Malaysian Standard
RACK 1
MS
544
2001
MS 544-2:2001
Code of practice for structural use of timber - Part 11: Recommedations for the calculation basis for span tables - Section 4: Domestic rafters Code of practice for structural use of timber :Part 2: Permissible stress design of solid timber (First revision)
Malaysian Standard
RACK 1
MS
544
2001
MS 544-3:2001
Code of practice for structural use of timber :Part 3: Permissible stress design of glued laminated timber (First revision)
Malaysian Standard
RACK 1
MS
544
2001
MS 544-41:2001
Code of practice for structural use of timber: Part 4: Timber panel products: Section 1: Structural plywood
Malaysian Standard
RACK 1
MS
544
2001
MS 544-42:2001
Code of practice for structural use of timber: Part 4: Timber panel products: Section 2: Marine plywood
Malaysian Standard
RACK 1
MS
544
2001
MS 544-43:2001
Code of practice for structural use of timber: Part 4: Timber panel products: Section 3: Cement bonded particleboard (CBP)
Malaysian Standard
RACK 1
MS
544
2001
MS 544-44:2001
Code of practice for structural use of timber: Part 4: Timber panel products: Section 1: Oriented strand board (OSB)
MS
544
2001
MS 544-5:2001
Code of practice for structural use of timber: Part 5: Timber joints
Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1
RACK 1 RACK 1
Page 24 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
544
2001
MS 544-7:2001
Code of practice for structural use of timber: Part 7: Testing (First revision)
MS
544
2001
MS 544-91:2001
Code of practice for structural use of timber: Part 9: Fire resistance of timber structures: Section 1: Method of calculating fire resistance of timber members
MS
550
1978
MS 550:1978
Round steel wire for ropes
MS
551
1978
MS 551:1978
Specification for wire ropes for cranes, excavators and general engineering purposes
MS
555
1985
MS 555: 1985
Specification for fire dampers (First revision)
MS
555
2003
MS 555-1: 2003
Fire dampers: Part 1: Specification (Second revision)
MS
555
2003
MS 555-2: 2003
Fire dampers: Part 2: Installation (Second revision)
MS
556
1978
MS 556: 1978
Electrical safety code on private electric generating plant
MS
566
2003
MS 566-3: 2003
Specification for portable fire extinguishers - Part 3: Selection and installation - Code of practice (First revision)
MS
588
1979
MS 588: 1979
Specification for radio interference suppression on marine installations
MS
589
1997
MS 589-1: 1997
Specification for 13A plugs, socket-outlets, adaptors and connection units Part 1: Specification for rewirable and non-rewirable 13A fused plugs (First revision)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
589
1997
MS 589-2: 1997
Specification for 13A plugs, socket-outlets, adaptors and connection units Part 2: Specification for 13A switched and unswitched socket - outlet (First revision)
Malaysian Standard
RACK 1
MS
589
1998
MS 589-3: 1998
Specification for 13A plugs, socket-outlets, adaptors and connection units Part 1: Specification for adaptors (First revision)
Malaysian Standard
RACK 1
MS
590
1979
MS 590: 1979
Specification for low voltage air break switches, air break disconnectors, air break switch disconnectors and fuse combination units
MS
591
1979
MS 591: 1979
Nomenclature for pistons for internal combustion engines
MS
593
1979
MS 593: 1979
Specification for performance requirements of hot-forged rivets
MS
60044
2010
MS 60044-1: 2010
Instrument transformers - Part 1: Current transformers (First revision) (IEC 60044-1: 2003, MOD)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
60051
2008
MS 60051-1: 2008
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts (First revision) (IEC 60051-1: 1997, MOD)
Malaysian Standard
RACK 1
MS
60071
2012
MS 60071-4: 2012
Insulation co-ordination - Part 4: Computational guide to insulation co-ordinational and modelling of electrical networks
Malaysian Standard
RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1
Page 25 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS 60071-5: 2012 MS 60076-1: 2015 MS 60076-11: 2012
Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations (IEC/TS 60071-5: 2002, MOD)
2012
MS 60076-7: 2012
Power transformers - Part 7: Loading guide for oil -immersed power transformers (First revision) (IEC 60076-7: 2005, MOD)
603
1979
MS 603: 1979
Code of practice for interior lighting
MS
60567
2013
MS 60567: 2013
Oil-filled electrical equipment - sampling of gases and oil for analysis of free and dissolved gases - Guidance (IEC 60567:2005, MOD)
Malaysian Standard Malaysian Standard Malaysian Standard
MS
60599
2013
MS 60599: 2013
Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599: 2007, MOD)
Malaysian Standard
RACK 1
MS
60725
2011
MS 60725: 2011
Consideration of reference impedances and public supply network impedance for use in determining disturbance characteristics of electrical equipment having a rated current ≤ 75 A per phase
Malaysian Standard
RACK 1
MS
60904
2013
MS 60904-3: 2013
Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data (IEC 60904-3: 2008, MOD)
Malaysian Standard
RACK 1
MS
61000
2010
MS 61000-2-8: 2010
Electromagnetic compactibility (EMC) - Part 2-8: Enviroment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results (First revision)
Malaysian Standard
RACK 1
MS
61000
2011
MS 61000-3-13: 2011
Electromagnetic compactibility (EMC) - Part 3-13: Limits - asessement of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems
Malaysian Standard
RACK 1
MS
61000
2011
MS 61000-3-5: 2011
Electromagnetic compactibility (EMC) - Part 3-5: Limits - limitation of voltage fluctuations and flicker in low
Malaysian Standard
RACK 1
MS
61000
2010
MS 61000-3-6: 2010
Electromagnetic compactibility (EMC) - Part 3-6: Limits - asessement of emission limits for the connection of distorting installations to MV, HV and EHV power systems ( First revision)
Malaysian Standard
RACK 1
MS
61000
2010
MS 61000-3-7: 2010
Electromagnetic compactibility (EMC) - Part 3-7: Limits - asessement of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems ( First revision)
Malaysian Standard
RACK 1
2014
MS 61000-4-34: 2014
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (First revision) (IEC 61000-4-34: 2009,MOD)
Malaysian Standard
RACK 1
MS
60071
2012
MS
60076
2015
MS
60076
2012
MS
60076
MS
MS
61000
Power transformers - Part 1: General (First revision) (IEC 600076-1: 2011, MOD) Power transformers - Part 11: Dry- type transformers (IEC 60076-11: 2004, MOD)
Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 26 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY] Malaysian Standard
RACK 1
MS 61000-6-5: 2010
Electromagnetic compactibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (Second Revision) (IEC 61000-4-11: 2004, MOD) Electromagnetic compactibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments
Malaysian Standard
RACK 1
2010
MS 61508-1: 2010
Functional safety of electical/electronic/Programmable electronic safety - related systems Part 1: General requirements (IEC 61508-1: 1998,MOD)
Malaysian Standard
RACK 1
61508
2010
MS 61508-2: 2010
Functional safety of electical/electronic/Programmable electronic safety - related systems Part 1: General requirements (IEC 61508-1: 1998,MOD)
Malaysian Standard
RACK 1
MS
61508
2010
MS 61508-3: 2010
Functional safety of electical/electronic/Programmable electronic safety - related systems Part 3: Software requirements (IEC 61508-3: 1998,MOD)
Malaysian Standard
RACK 1
MS
61508
2010
MS 61508-4: 2010
Functional safety of electical/electronic/Programmable electronic safety - related systems Part 4: Definitions and abbreviations (IEC 61508-4: 1998,MOD)
Malaysian Standard
RACK 1
MS
61508
2010
MS 61508-5: 2010
Functional safety of electical/electronic/Programmable electronic safety - related systems Part 5: Examples of methods for the determination of safety integrity levels (IEC 61508-5: 1998,MOD)
Malaysian Standard
RACK 1
MS
61508
2010
MS 61508-6: 2010
Functional safety of electical/electronic/Programmable electronic safety - related systems Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (IEC 61508-6: 2000,MOD)
Malaysian Standard
RACK 1
MS
61508
2010
MS 61508-7: 2010
Functional safety of electical/electronic/Programmable electronic safety - related systems Part 7: Overview of techniques and measures (IEC 61508-7: 2000,MOD)
Malaysian Standard
RACK 1
MS
61508
2012
MS 61508-7-1: 2012
Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models (IEC 61850-7-1: 2011, MOD)
Malaysian Standard
RACK 1
MS
61511
2011
MS 61511-1: 2011
Functional safety - safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements (IEC 61511-1: 2003,MOD)
Malaysian Standard
RACK 1
MS
61511
2011
MS 61511-2: 2011
Functional safety - safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 (IEC 61511-2: 2003,MOD)
Malaysian Standard
RACK 1
MS
61511
2011
MS 61511-3: 2011
Functional safety - safety instrumented systems for the process industry sector - Part 2: Guidance for the determination of the required safety integrity levels (IEC 61511-3: 2003,MOD)
Malaysian Standard
RACK 1
MS
616
1998
MS 616-1: 1998
Switches for household and similar fixed electrical installations: Part 1: General requirements (First revision)
Malaysian Standard
RACK 1
MS
61000
2015
MS 61000-4-11: 2015
MS
61000
2010
MS
61508
MS
Page 27 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
616
2000
MS 616-2-1: 2000
Switches for household and similar fixed electrical installations: Part 2: Particular requirements Section 1: Electronic switches (IEC 60669-2-1: 1996 and its amendment 1: 1997 and proposed amendment 2: 1999 (CDV), MOD)
Malaysian Standard
RACK 1
MS
616
2000
MS 616-2-2: 2000
Switches for household and similar fixed electrical installations: Part 2: Particular requirements Section 2: Remote control swithes (RCS) (IEC 60669-2-2: 1996 and its amendment 1: 1997)
Malaysian Standard
RACK 1
MS
616
2000
MS 616-2-3: 2000
Switches for household and similar fixed electrical installations: Part 2: Particular requirements Section 3: Time delay switches (TDS) (IEC 60669-2-3: 1997, MOD)
Malaysian Standard
RACK 1
MS
619
1985
MS 619-102102.22: 1985
Specification for luminaries for emergency lighting
Malaysian Standard
RACK 1
MS
619
2005
MS 619-2-22: 2005
Malaysian Standard
RACK 1
MS
619
1983
MS 619-2-2.6: 1983
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting (First revision) (IEC 60598-2-22: 1997 and AMD.1: 2002,MOD) Specification for electric luminaries (lighting fittings) Part 2: Detail requirements Section 2.6: Electrical supply track systems for luminaires
Malaysian Standard
RACK 1
MS
62052
2009
MS 62052-11: 2009
Electricity metering equipment (a.c.) - General requirements, tests and test conditions Part 11: Metering equipment ( Second revision) (IEC 62052-11: 2003, MOD)
Malaysian Standard
RACK 1
MS
62052
2009
MS 62052-21: 2009
Electricity metering equipment (a.c.) - General requirements, tests and test conditions Part 21: Tariff and load control equipment ( Second revision) (IEC 62052-21: 2004, MOD)
Malaysian Standard
RACK 1
MS
62053
2009
MS 62053-11: 2009
Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (Classes 0,5,1 and 2)( Second revision) (IEC 62053-11: 2003, MOD)
Malaysian Standard
RACK 1
MS
62053
2009
MS 62053-21: 2009
Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (Classes 1 and 2) ( Second revision) (IEC 62053-21: 2003, MOD)
Malaysian Standard
RACK 1
MS
62053
2009
MS 62053-22: 2009
Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (Classes 0, 2 S and 0,5 S) ( Second revision) (IEC 62053-22: 2003, MOD)
Malaysian Standard
RACK 1
MS
62053
2009
MS 62053-23: 2009
Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for active energy (Classes 2 and 3) ( Second revision) (IEC 62053-23: 2003, MOD)
Malaysian Standard
RACK 1
MS
62053
2009
MS 62053-31: 2009
Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (Two Wires Only) (Second revision) (IEC 62053-31: 1998, MOD)
Malaysian Standard
RACK 1
Page 28 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS 62053-61: 2009
Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements (Second revision) (IEC 62053-61: 1998, MOD)
Malaysian Standard
MS 62054-21: 2009 MS 62055-21: 2011 MS 62059-11: 2009 MS 62257-1: 2009
Electricity metering equipment (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches (Second revision) (IEC 62054-21: 2004, MOD)
Recommendation for small renewable energy and hybrid systems for rural electrification - Part 1: General introduction to rural electrification
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
2009
MS 62257-2: 2009
Recommendation for small renewable energy and hybrid systems for rural electrification - Part 2: From requirements to a range of electrification systems
Malaysian Standard
RACK 1
62257
2009
MS 62257-3: 2009
Recommendation for small renewable energy and hybrid systems for rural electrification - Part 3: Project development and management
Malaysian Standard
RACK 1
MS
62257
2009
MS 62257-4: 2009
Recommendation for small renewable energy and hybrid systems for rural electrification - Part 4: System selection and design
MS
623
1981
MS 623: 1981
Specification for semi-compressed asbestos cement flat sheets
Malaysian Standard Malaysian Standard
MS
62351
2012
MS 62351-3: 2012
Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security Profiles including TCP/IP (IEC 62351-3: 2007, MOD)
Malaysian Standard
RACK 1
MS
62351
2015
MS 62351-4: 2015
Power systems management and associated information exchange - Data and communications security - Part 4: Profiles including MMS
Malaysian Standard
RACK 1
MS
62351
2015
MS 62351-6: 2015
Power systems management and associated information exchange - Data and communications security - Part 6: Security for IEC 61850
Malaysian Standard
RACK 1
MS
62471
2014
MS 62471-2: 2014
Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non laser optical radiation safety
MS
62504
2012
MS 62504: 2012
General lighting - LEDs and LED modules - Terms and definitions
MS
62722
2012
MS
62722
2012
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
628
1999
MS 628-1: 1999
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 1: Pipes (First revision)
Malaysian Standard
RACK 1
MS
628
1999
MS 628-2-2.1: 1999
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 2: Joints and fittings for use with unplasticised PVC pipes: Section 2.1: uPVC joints and fittings
Malaysian Standard
RACK 1
MS
62053
2009
MS
62054
2009
MS
62055
2011
MS
62059
2009
MS
62257
2009
MS
62257
MS
MS 62722-1: 2012 MS 62722-2-1: 2012
Electricity metering - payment systems - Part 21: Framework for standardisation Electricity metering equipment - Dependability - Part 11: General concepts
Luminaire performance - Part 1: General requirements Luminaire performance - Part 2-1: Particular requirements for LED luminaires
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1
Page 29 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
628
1999
MS 628-2-2.2: 1999
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 2: Joints and fittings for use with unplasticised PVC pipes: Section 2.2: Solvent cement
Malaysian Standard
MS
628
1999
MS 628-3: 1999
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 3: Guide for installation
MS
66
1999
MS 66-1:1999
Specification for primary cells and batteries: Part 1: General (Second revision)
MS
66
1999
MS 66-2:1999
Specification for primary cells and batteries: Part 2: Specification sheets
MS
68
1991
MS 68:1991
Specification for containers for lead-acid batteries (First revision)
MS
69
1995
MS 69:1995
Specification for conductors in insulated cables and cords (Second revision)
MS
7
1971
MS 7:1971
Specification for tungsten filament electric lamp for general service
MS
704
1981
MS 704 : 1981
Specification for hacksaw blades
MS
704
2005
MS 704 : 2005
Hacksaw blades - specification (First revision)
MS
705
1981
MS 705 : 1981
Specification for hand hammers
MS
706
1981
MS 706 : 1981
Specification for cold chisels
MS
708
1981
MS 708 : 1981
Specification for grey iron pipes and fittings
MS
709
1981
MS 709 : 1981
Specification for cast iron non-pressure pipes and fittings
MS
71
1972
MS 71:1972
Specification for radio interference limits for electrical appliances
MS
712
1981
MS 712 : 1981
Specification for asbestos cement pressure pipes
MS
73
1972
MS 73:1972
Specification for radio interference measuring set for the frequency range 0.015 MHz to 1000 MHz
MS
735
2010
MS 735 : 2010
Plastics feeding bottles : specification (Second revision)
MS
738
1981
MS 738 : 1981
Specification for terrazzo floor tiles
MS
754
1981
MS 754 : 1981
Specification for stranded wire ropes - technical delivery requirements
MS
762
1982
MS 762 : 1982
Specification for unplasticised PVC pipe for industrial use
MS
763
1982
MS 763 : 1982
Specification for preferred number series for resistance and capacitors
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 30 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
764
2003
MS 764-1: 2003
Specification for fixed resistors Part 1: Terms and methods of test
MS
764
1982
MS 764-3-1: 1982
Standard for fixed resistors Part 3: Wirewound resistors Type 1: Selection of methods of test and general requirements
Malaysian Standard Malaysian Standard
MS
765
1982
MS 765 : 1982
Recommendation for characteristic impedances and dimensions of radio-frequency coaxial cable
Malaysian Standard
MS
766
1982
MS 766-1: 1982
Low-frequency communication cables and wires with PVC insulation and PVC sheath : Part 1: General tests and measuring methods
MS
767
1982
MS 767 : 1982
Standard for marking codes for resistors and capacitors
MS
768
1982
MS 768 : 1982
General rules for power transformers (not exceeding 1KVA rating) for electronic equipment
Malaysian Standard Malaysian Standard Malaysian Standard
MS
769
1982
MS 769 : 1982
Specification for bayonet lamp-caps lampholders and B.C. adaptors (lampholder plugs)
MS
770
1982
MS 770 : 1982
Specification for ceiling roses
MS
774
1982
MS 774 : 1982
Industrial V-belts
MS
792
1982
MS 792 : 1982
Specification for typewriter ribbon, nylon
MS
793
1982
MS 793 : 1982
Specification for typewriter ribbon, cotton
MS
794
1982
MS 794 : 1982
Specification for masonry cement
MS
794
2010
MS 794 : 2010
Masonry cement - specification (First revision)
MS
795
2002
MS 795 : 2002
Specification for WC flushing cisterns and flush pipes (First revision)
MS
795
2011
MS 795-1: 2011
WC Flushing cisterns - Part 1: Specification (Second revision)
MS
795
2011
MS 795-2: 2011
WC Flushing cisterns - Part 2: Inlet Valves (Second revision)
MS
795
2011
MS 795-3: 2011
WC Flushing cisterns - Part 3: Flushing device (Second revision)
MS
796
1982
MS 796 : 1982
Specification for small wire ropes
MS
797
1982
MS 797-1&2 : 1982
Part 1: Specification for concrete interlocking roofing tiles Part 2: Code of recommended practice for the installation of concrete interlocking roofing tiles
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
798
1982
MS 798 : 1982
Guide to the calculation of resistance of plain and tinned copper conductors of low frequency cables and wires
Malaysian Standard
RACK 1
MS
823
1983
MS 823 : 1983
Specification for bull dog grips
Malaysian
RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 31 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
824
1983
MS 824 : 1983
Specification for thimbles for wire ropes
MS
825
2007
MS 825-1 : 2007
Code of practice for the design of road lighting Part 1: Lighting of roads and public amenity areas (First revision)
MS
825
2012
MS 825-4 : 2012
Code of practice for the design of road lighting Part 4: Performance requirements
MS
825
2012
MS 825-5 : 2012
Code of practice for the design of road lighting Part 5: Calculation of performance
MS
825
2012
MS 825-6 : 2012
Code of practice for the design of road lighting Part 6: Methods of measuring lighting performance
MS
826
1983
MS 826-1 : 1983
Glossary of terms used in data processing Part 1: Fundamentals terms
MS
826
1986
MS 826-12 : 1986
Glossary of terms used in data processing Part 12: Data media, storage and related equipment
MS
826
1986
Glossary of terms used in data processing Part 14: Reliability, maintenance and availability
MS
826
1987
MS
826
1987
MS 826-14 : 1986 MS 826-16 : 1987 MS 826-19 : 1987
MS
826
1983
MS 826-2 : 1983
Glossary of terms used in data processing Part 2: Arithmetic and logic operations
MS
826
1983
MS 826-3 : 1983
Glossary of terms used in data processing Part 3: Equipment technology (selected terms)
MS
826
1983
MS 826-4 : 1983
Glossary of terms used in data processing Part 4: Organization of data
MS
826
1983
MS 826-5 : 1983
Glossary of terms used in data processing Part 5: Representation of data
MS
826
1983
MS 826-6 : 1983
Glossary of terms used in data processing Part 6: Preparation and handling of data
MS
826
1983
MS 826-7 : 1983
Glossary of terms used in data processing Part 7: Digital computer programming
MS
830
2003
MS 830 : 2003
Code of practice for the storage, handling and transportation of liquefied petroleum gases (Second revision)
MS
831
1986
MS 831 : 1986
Specification for valves for use with domestic liquefied petroleum gas (LPG) cylinders
MS
832
1984
MS 832 : 1984
Specification for aluminium alloy windows
MS
832
2011
MS 832 : 2011
Aluminium alloy windows - specification (First revision)
Glossary of terms used in data processing Part 16: Information theory Glossary of terms used in data processing Part 19: Analog computing
Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 32 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
838
1983
MS 838 : 1983
Code of practice for radiation protection (medical x-ray diagnosis)
MS
839
1983
MS 839 : 1983
Code of practice for the reception of sound and television broadcasting
MS
840
1983
MS 840 : 1983
Recommended methods for soil physical analysis
MS
847
1983
MS 847 : 1983
Specification for silica sand for the manufacture of sodium silicate
MS
854
1983
MS 854 : 1983
Specification for ball-point pens and refills
MS
855
1983
MS 855 : 1983
Specification for newsprint
MS
856
1983
MS 856 : 1983
Specification for envelopes for storage of processed x-ray films
MS
857
1983
MS 857 : 1983
Specification for bordeaux connections
MS
858
1983
MS 858 : 1983
Specification for glazed ceramic tiles for internal walls
MS
860
1983
MS 860-1 : 1983
Specification for power supply units for extra low voltage output Part 1: Units for indoor use
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
861
1983
MS 861-1 : 1983
Specification for radio frequency communication cables Part 1: General requirements and measuring methods
Malaysian Standard
RACK 1
MS
862
1983
MS 862 : 1983
Specification for welded and seamless carbon steel pipes for general pressure purposes
Malaysian Standard
RACK 1
MS
863
1983
MS 863 : 1983
Specification for welded and seamless carbon steel pipes (6 mm to 150 mm) screwed type
MS
866
1983
MS 866 : 1983
Code of practice for methods of defining, recording and assessing work injuries
MS
870
1984
MS 870 : 1984
Specification for soft solder
MS
873
1984
MS 873 : 1984
Specification for powdered activated carbon
MS
881
1991
MS 881-1 : 1991
Specification for precast concrete pipes and fittings for drainage and sewerage Part 1: Specification for pipes and fittings with flexible joints and manholes
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS
881
1991
MS 881-2 : 1991
Specification for precast concrete pipes and fittings for drainage and sewerage Part 2: Specification for inspection chambers and street gullies
Malaysian Standard
MS
881
1991
MS 881-3 : 1991
Specification for precast concrete pipes and fittings for drainage and sewerage Part 3: Specification for pipes and fittings with ogee joints
MS
887
1984
MS 887 : 1984
Specification for spike-proof combat boots
MS
888
1991
MS 888 : 1991
Specification for white Portland cement (First revision)
Malaysian Standard Malaysian Standard Malaysian
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 33 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY] Standard
MS
922
1984
MS 922-1 : 1984
Specification for concrete admixtures Part 1: Accelerating admixtures, retarding admixtures and water-reducing admixtures
Malaysian Standard
RACK 1
MS
925
1984
MS 925 : 1984
Specification for direct acting indication electrical measuring instruments and their accessories
Malaysian Standard
RACK 1
MS
930
2010
MS 930 : 2010
Code of practice for the installation of fuel gas piping systems and appliances (First revision)
MS
935
1984
MS 935 : 1984
Code of practice for loading guide for oil-immersed transformers
MS
938
1984
MS 938 : 1984
Specification for classification of materials for the insulation of electrical machinery and apparatus in relation to their thermal stability in service
MS
940
1984
MS 940 : 1984
Specification for classification of degrees of protection provided by enclosures
MS
941
1984
MS 941 : 1984
Specification for degrees of protection of enclosures for low-voltage switchgear and controlgear
MS
942
1984
MS 942 : 1984
Specification for lighting sets for decorative purposes for indoor use
MS
943
1984
MS 943 : 1984
Specification for electrical safety requirements for room aerials
MS
944
1984
MS 944 : 1984
Specification for maximum demand indicators class 1.0
MS
945
1984
MS 945 : 1984
Specification for earth and bonding clamps
MS
946
1984
MS 946 : 1984
Specification for residual current operated protective device
MS
947
1984
MS 947 : 1984
Specification for photoelectric control units for road lighting
MS
948
1984
MS 948 : 1984
Specification for factory-built assemblies of switchgear and controlgear
MS
949
1984
MS 949 : 1984
Code of practice for safety in welding and cutting
MS
964
1985
MS 964 : 1985
Specification for resin flux cored solder
MS
972
1998
MS 972 : 1998
Specification for solid rubber flooring (First revision)
MS
977
1986
MS 977-1 : 1986
Code of practice for subsurface investigation, Part 1: For design and construction of foundations of buildings
MS
977
1985
MS 977-2 : 1985
Code of practice for subsurface investigation, Part 2: Roads
MS
978
1985
MS 978 : 1985
Specification for plastics waste pipe and fittings
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Page 34 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS
980
1985
MS 980 : 1985
Specification for safety signs and colours: colorimetric and photometric properties of materials
MS
981
1985
MS 981 : 1985
Specification for safety signs and colours: colour and design
MS
983
2000
MS 983 : 2000
Specification for KELUAR signs (Internally illuminated) (Second revision)
MS
994
1990
MS 994 : 1990
Specification for water for lead acid batteries
MS
1766
2004
Installation of diaphragm gas meters - Specification
MS
1064
2009
MS I766: 2004 MS 1064-10: 2001 (Confirmed 2009)
MS EN
1008
2010
MS EN 1008: 2010
MS EN
12390
2012
MS EN
12390
MS EN
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 1 RACK 1 RACK 1 RACK 1 RACK 1
Guide to modular coordination in buildings: Part 10: Coordinating sizes and preferred sizes for reinforced concrete components Mixing water for concrete - specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete (Second revision)
Malaysian Standard Malaysian Standard
RACK 1
MS EN 12390-1: 2012
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds (Second revision)
Malaysian Standard
RACK 1
2012
MS EN 12390-2: 2012
Testing hardened concrete - Part 2: Making and curing specimens for strength tests (Second revision)
Malaysian Standard
RACK 1
12390
2012
MS EN 12390-3: 2012
Testing hardened concrete - Part 3: Compressive strength of test specimens (Second revision)
Malaysian Standard
RACK 1
MS EN
12390
2012
MS EN 12390-4: 2012
Testing hardened concrete - Part 4: Compressive strength of testing specimens (Second revision)
Malaysian Standard
RACK 1
MS EN
12390
2012
MS EN 12390-5: 2012
Testing hardened concrete - Part 5: Flexural strength of test specimens (Second revision)
Malaysian Standard
RACK 1
MS EN
12390
2012
MS EN 12390-6: 2012
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens (Second revision)
Malaysian Standard
RACK 1
MS EN
12390
2012
MS EN 12390-7: 2012
Testing hardened concrete - Part 7: Density of hardened concrete (Second revision)
Malaysian Standard
RACK 1
MS EN
12390
2012
MS EN 12390-8: 2012
Testing hardened concrete - Part 8: Depth of penetration of water under pressure (Second revision)
Malaysian Standard
RACK 1
MS EN
12504
2013
MS EN 12504-1: 2013
Testing concrete in structures - Part 1: Cored specimens - taking, examining and testing in compression (Second revision)
Malaysian Standard
RACK 1
MS EN
12504
2013
MS EN 12504-2: 2013
Testing concrete in structures - Part 2: Non destructive testing - Determination of rebound number (Second revision)
Malaysian Standard
RACK 1
MS EN
12504
2013
MS EN 12504-3: 2013
Testing concrete in structures - Part 3: Determination of pull out force (Second revision)
Malaysian Standard
RACK 1
RACK 1
Page 35 of 73
March 14, 2017 MS EN
12504
2013
MS EN
12620
2010
MS EN
1990
2010
MS EN
1990
2010
MS EN
1991
2010
MS EN
1991
2010
MS EN
1992
2010
MS EN
1992
2010
MS EN
1993
2010
MS EN
1993
2010
MS EN
1997
2012
MS EN
1997
2012
MS EN
934
MS EN
MS EN 12504-4: 2013 MS EN 12620: 2010 MS EN 1990: 2010 MS EN 1990: 2010 MS EN 1991-11: 2010 MS EN 1991-11: 2010 (National Annex) MS EN 1992-11: 2010 MS EN 1992-11: 2010 (National Annex) MS EN 1993-11: 2010 MS EN 1993-11: 2010 (National Annex) MS EN 1997-1: 2012
[MALAYSIAN STANDARD – IEM LIBRARY] Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity (Second revision)
Malaysian Standard
RACK 1
Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self weight, imposed loads for buildings
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
Malaysia National Annex to Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self weight, imposed loads for buildings
Malaysian Standard
RACK 1
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
Malaysian Standard
RACK 1
Malaysia National Annex to Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
Malaysian Standard
RACK 1
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
Malaysian Standard
RACK 1
Malaysia National Annex to Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
Malaysian Standard
RACK 1
Eurocode 7: Geotechnical design - Part 1: General rules
Malaysian Standard
RACK 1
MS EN 1997-1: 2012
Malaysia National Annex to Eurocode 7: Geotechnical design - Part 1: General rules
Malaysian Standard
RACK 1
2011
MS EN 932-3: 2011
Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description
Malaysian Standard
RACK 1
934
2012
MS EN 934-1: 2012
Admixtures for concrete, mortar and grout - Part 1: Common requirements (First revision)
Malaysian Standard
RACK 1
MS EN
934
2012
MS EN 934-2: 2012
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling (First revision)
Malaysian Standard
RACK 1
MS EN
934
2012
MS EN 934-3: 2012
Admixtures for concrete, mortar and grout - Part 3: Admixtures for monsonry mortar Definitions, requirements, conformity, marking and labelling (First revision)
Malaysian Standard
RACK 1
Aggregates for concrete (Second revision) Eurocode - Basis of structural design Malaysia National Annex to Eurocode - Basis of structural design
RACK 1 RACK 1 RACK 1 RACK 1
Page 36 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS EN
934
2012
MS EN 934-4: 2012
Admixtures for concrete, mortar and grout - Part 4: Admixtures for prestressing tendons - Definitions, requirements, conformity, marking and labelling (First revision)
Malaysian Standard
RACK 1
MS EN
934
2012
MS EN 934-5: 2012
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete Definitions, requirements, conformity, marking and labelling (First revision)
Malaysian Standard
RACK 1
MS EN
934
2012
MS EN 934-6: 2012
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity (First revision)
Malaysian Standard
RACK 1
MS ISO
1210
1995
MS ISO 1210: 1995
Plastics - Determination of the burning behaviour of horizontal and vertical specimens in contact with a small flame ignition source
Malaysian Standard
RACK 2
MS ISO
13849
2008
MS ISO 13849-1 : 2008
Safety of machinery - safety related parts of control systems - Part 1: General principles for design (First revision) (ISO 13849-1: 2006,IDT)
Malaysian Standard
RACK 2
MS ISO
13849
2008
MS ISO 13849-1 : 2008
Safety of machinery - safety related parts of control systems - Part 1: General principles for design (First revision) (ISO 13849-1: 2006,IDT)
Malaysian Standard
RACK 2
MS ISO
13856
2003
MS ISO 13856-1 : 2003
Safety of machinery - pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1: 2001,IDT)
Malaysian Standard
RACK 2
MS ISO
13856
2003
MS ISO 13856-1 : 2003
Safety of machinery - pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1: 2001,IDT)
Malaysian Standard
RACK 2
MS ISO
13856
2006
MS ISO 13856-2 : 2006
Safety of machinery - pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2: 2005,IDT)
Malaysian Standard
RACK 2
MS ISO
13856
2006
MS ISO 13856-2 : 2006
Safety of machinery - pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2: 2005,IDT)
Malaysian Standard
RACK 2
MS ISO
13856
2008
MS ISO 13856-3 : 2008
Safety of machinery - pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3: 2006,IDT)
Malaysian Standard
RACK 2
MS ISO
13856
2008
MS ISO 13856-3 : 2008
Safety of machinery - pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3: 2006,IDT)
Malaysian Standard
RACK 2
MS ISO
14121
2004
MS ISO 14121 : 2004
Safety of machinery - principles of risk assessment (ISO 14121: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
14121
2004
MS ISO 14121 : 2004
Safety of machinery - principles of risk assessment (ISO 14121: 1999, IDT)
Malaysian Standard
RACK 2
Page 37 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
14122
2003
MS ISO 141222: 2003
Safety of machinery - permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2: 2001, IDT)
Malaysian Standard
RACK 2
MS ISO
14122
2003
MS ISO 141222: 2003
Safety of machinery - permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2: 2001, IDT)
Malaysian Standard
RACK 2
MS ISO
2854
1994
MS ISO 2854: 1994
Statistical intrepretation of data - Techniques of estimation and tests relating to means and variances
Malaysian Standard
RACK 2
MS ISO
2859
2000
MS ISO 2859-0: 2000
Sampling procedures for inspection by attributes - Part 0: Introduction to the ISO 2859 attribute sampling system (ISO 2859-0: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
2859
2000
MS ISO 2859/2: 2000
Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859/2: 1985, IDT)
Malaysian Standard
RACK 2
MS ISO
2859
2002
Sampling procedures for inspection by attributes - Part 4: Procedures for assesment of stated quality levels (ISO 2859-4: 1999, IDT)
MS ISO
3207
1994
MS ISO
3301
1994
MS ISO
3494
1994
MS ISO
3534
1999
MS ISO 2859-4: 2002 MS ISO 3207: 1994 MS ISO 3301: 1994 MS ISO 3494: 1994 MS ISO 3534-2: 1999
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS ISO
3534
2001
Statistics - Vocabulary and symbols - Part 3: Design of experiments (ISO 3534-3: 1999, IDT)
MS ISO
3611
2001
MS ISO
3807
1998
MS ISO
1001
1994
MS ISO
2532
2001
MS ISO
4306
2001
MS ISO
4909
1994
MS ISO
5138
1993
MS ISO
5218
1993
MS ISO 3534-3: 2001 MS ISO 3611: 1997 MS ISO 3807: 1998 MS ISO 1001: 1994 MS ISO 2532: 2001 MS ISO 4306-3: 2001 MS ISO 4909: 1994 MS ISO 5138-1: 1993 MS ISO 5218: 1993
Statistical intrepretation of data - Determination of a statistical tolerance interval Statistical intrepretation of data - Comparison of two means in the case of paired observations Statistical intrepretation of data - Power of tests relating to means and variances Statistics - Vocabulary and symbols - Part 2: Statistical quality control (ISO 3534-2: 1993, IDT)
Micrometer callipers for external measurement Dissolved acetylene cylinders - Basic requirements Information processing - File structure and labelling of magnetic tapes for information interchange Steel wire ropes - vocabulary (ISO 2532: 1974, IDT) Cranes - vocabulary Part 3: Tower cranes (ISO 4306-3: 1991, IDT) Bank cards - magnetic stripe data content for track 3 Office machines - vocabulary - section 1: Dictation equipment Information interchange - representation of human sexes
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 2 RACK 2 RACK 2 RACK 2 RACK 2 RACK 2 RACK 2 RACK 2 RACK 2 RACK 2 RACK 2 RACK 2 RACK 2 RACK 2
Page 38 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
6098
1994
MS ISO 6098: 1994
Information processing - self- loading cartridges for 12,7 mm (0.5 in) wide magnetic tape
Malaysian Standard
RACK 2
MS ISO
6182
2000
MS ISO 6182-1: 2000
Fire protection - automatic sprinkler systems - Part 1: Requirements and test methods for sprinklers (ISO 6182-1: 1993, IDT)
Malaysian Standard
RACK 2
MS ISO
6182
2000
MS ISO 6182-2: 2000
Fire protection - automatic sprinkler systems - Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms (ISO 6182-2: 1993, IDT)
Malaysian Standard
RACK 2
MS ISO
6182
2000
MS ISO 6182-3: 2000
Fire protection - automatic sprinkler systems - Part 3: Requirements and test methods for dry pipe valves (ISO 6182-3: 1993, IDT)
Malaysian Standard
RACK 2
MS ISO
6182
2000
MS ISO 6182-4: 2000
Fire protection - automatic sprinkler systems - Part 4: Requirements and test methods for quick opening devices (ISO 6182-4: 1993, IDT)
Malaysian Standard
RACK 2
MS ISO
6182
2000
MS ISO 6182-5: 2000
Fire protection - automatic sprinkler systems - Part 5: Requirements and test methods for deluge valves (ISO 6182-5: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
6936
1993
MS ISO 6936: 1993
Information processing - conversion between the two coded characters sets of ISO 646 and ISO 6937-2 and the CCITT International Telegraph Alphabet No.2 (ITA 2)
Malaysian Standard
RACK 2
MS ISO
7064
1994
MS ISO
5479
2001
MS ISO
5725
2002
MS ISO
5725
2002
MS ISO
7870
2000
MS ISO
7901
MS ISO
MS ISO 7064: 1994 MS ISO 5479: 2001
Statistical interpretation of data - tests for departure from the normal distribution (ISO 5479: 1997, IDT)
Malaysian Standard Malaysian Standard
MS ISO 5725-6: 2002
Accuracy (Trueness and Precision) of measurement methods and results - Part 6: Use in practice of accuracy values (ISO 5725-6: 1994, IDT)
Malaysian Standard
MS ISO 5725-3: 2002 MS ISO 7870: 2000
Accuracy (Trueness and Precision) of measurement methods and results - Part 3: Use in practice of accuracy values (ISO 5725-3: 1994, IDT)
Malaysian Standard Malaysian Standard
1994
MS ISO 7901: 1994
Information processing - unrecorded, hard sectored, 130 mm (5.25 in) flexible disk cartridges, one or two sided use - dimensional, physical and magnetic characteristics
Malaysian Standard
RACK 2
7942
1992
MS ISO 7942: 1992
Information processing systems - Computer graphics - Graphical Kernel System (GKS) functional description
Malaysian Standard
RACK 2
MS ISO
8064
1994
MS ISO 8064: 1994
Information processing - reels for 12,7 mm (0.5 in) wide magnetic tapes - sizes 16, 18 and 22
Malaysian Standard
RACK 2
MS ISO
8208
1993
Information technology - Data communications - X.25 packet layer protocol for data terminal equipment
MS ISO
8258
1994
MS ISO
8422
1994
MS ISO 8208: 1993 MS ISO 8258: 1994 MS ISO 8422: 1994
Malaysian Standard Malaysian Standard Malaysian Standard
Data processing - check character systems
Control charts - General guide and introduction ( ISO 7870: 1993, IDT)
Shewhart control charts Sequential sampling plans for inspection at attributes
RACK 2 RACK 2 RACK 2 RACK 2 RACK 2
RACK 2 RACK 2 RACK 2
Page 39 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
8471
1993
MS ISO 8471: 1993
Information processing systems - Data communication - high level data link control balanced classes of procedures - Data link layer address resolution/negotiation in switched environments
Malaysian Standard
RACK 2
MS ISO
8651
1992
MS ISO 8651-1: 1992
Information processing systems - Computer graphics - Graphical Kernel System (GKS) Language Bindings Part 1: Fortran
Malaysian Standard
RACK 2
MS ISO
8651
1992
MS ISO 8651-2: 1992
Information processing systems - Computer graphics - Graphical Kernel System (GKS) Language Bindings Part 2: Pascal
Malaysian Standard
RACK 2
MS ISO
8651
1992
MS ISO 8651-3: 1992
Information processing systems - Computer graphics - Graphical Kernel System (GKS) Language Bindings Part 3: ADA
Malaysian Standard
RACK 2
MS ISO
8805
1992
MS ISO 8805: 1992
Information processing systems - Computer graphics - Graphical Kernel System for three dimensions (GKS-3D) functional description
Malaysian Standard
RACK 2
MS ISO
8860
1994
MS ISO 8860-1: 1994
Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, on 80 tracks on each side - Part 1: Dimensional, physical and magnetic characteristics
Malaysian Standard
RACK 2
MS ISO
8860
1994
MS ISO 8860-2: 1994
Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, on 80 tracks on each side - Part 2: Track format
Malaysian Standard
RACK 2
MS ISO
8907
1993
MS ISO
9000
2000
MS ISO
9000
2015
MS ISO
9004
2000
MS ISO
9592
1992
MS ISO
9592
MS ISO
MS ISO 8907: 1993 MS ISO 9000: 2000 MS ISO 9000: 2015 MS ISO 9004: 2000
Quality management systems - Guidelines for performance improvements (ISO 9004: 2000, IDT)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS ISO 9592-1: 1992
Information processing systems - Computer graphic - programmer's hierarchical interactive graphics system (PHIGS) - Part 1: Functional description
Malaysian Standard
RACK 2
1992
MS ISO 9592-2: 1992
Information processing systems - Computer graphic - programmer's hierarchical interactive graphics system (PHIGS) - Part 2: Archive file format
Malaysian Standard
RACK 2
9592
1992
MS ISO 9592-3: 1992
Information processing systems - Computer graphic - programmer's hierarchical interactive graphics system (PHIGS) - Part 3: Clear text encoding of archive file
Malaysian Standard
RACK 2
MS ISO
9926
2001
MS ISO 9926-1: 2001
Cranes - Training of operators - General (ISO 9926-1: 1990, IDT)
Malaysian Standard
RACK 2
MS ISO
10006
1998
MS ISO 10006: 1998
Quality management - Guidelines to quality in project management
Malaysian Standard
RACK 2
MS ISO
10011
1994
MS ISO 100112: 1994
Guidelines for auditing qualilty systems Part 2: Qualification criteria for quality systems auditors
Malaysian Standard
RACK 2
Information processing systems - Database language NDL Quality management systems - Fundamentals and vocabulary (ISO 9000: 2000, IDT) Quality management systems - Fundamentals and vocabulary (Second revision)
RACK 2 RACK 2 RACK 2 RACK 2
Page 40 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
10011
1994
MS ISO 100113: 1995
Guidelines for auditing qualilty systems Part 3: Management of audit programmes
Malaysian Standard
RACK 2
MS ISO
10012
1994
MS ISO 100121: 1994
Quality assurance requirements for measuring equipment : Part 1: Metrological confirmation system for maesuring equipment
Malaysian Standard
RACK 2
MS ISO
10012
1994
MS ISO 100122: 1998
Quality assurance requirements for measuring equipment : Part 2: Guidelines for control of measurement processes
Malaysian Standard
RACK 2
MS ISO
10006
2005
MS ISO 10006: 2005
Quality management systems - Guidelines for quality management in projects (First revision) (ISO 10006: 2003, IDT)
Malaysian Standard
RACK 2
MS ISO
10015
2002
MS ISO 10015: 2002
Quality management - Guidelines for training (ISO 10015: 199, IDT)
Malaysian Standard
RACK 2
MS ISO
10202
1996
MS ISO 102026: 1996
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards Part 6: Cardholder verification
Malaysian Standard
RACK 2
MS ISO
10545
2002
MS ISO 105451: 2002
Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2002
MS ISO 105452: 2003
Ceramic tiles - Part 1: Determination of dimensions and surface quality (ISO 10545-2: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2001
MS ISO 105453: 2001
Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2002
MS ISO 105455: 2002
Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution (ISO 10545-5: 1996, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2001
MS ISO 105456: 2001
Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2001
MS ISO 105457: 2001
Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles (ISO 10545-7: 1996, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2001
MS ISO 105458: 2001
Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8: 1994, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2001
MS ISO 105459: 2001
Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9: 1994, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2002
MS ISO 1054510: 2002
Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2001
MS ISO 1054511: 2001
Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-11: 1994, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2001
MS ISO 1054512: 2001
Ceramic tiles - Part 12: Determination of frost resistance (ISO 10545-12: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2001
MS ISO 1054513: 2002
Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2001
MS ISO 1054514: 2001
Ceramic tiles - Part 14: Determination of resistance to strains (ISO 10545-14: 1995, IDT)
Malaysian Standard
RACK 2
Page 41 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
10545
2002
MS ISO 1054515: 2002
Ceramic tiles - Part 15: Determination of lead and cadmium given off glazed tiles (ISO 10545-15: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
10545
2002
MS ISO 1054516: 2002
Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
11095
2001
MS ISO
11834
2001
MS ISO
11834
2002
MS ISO
14001
1995
MS ISO 14001: 1995 (P)
Environmental management systems - specification with guidanace for use
Malaysian Standard
RACK 2
MS ISO
14001
1997
MS ISO 14001: 1997
Environmental management systems - specification with guidanace for use
Malaysian Standard
RACK 2
MS ISO
14001
2004
MS ISO 14001: 2004
Environmental management systems - specification with guidanace for use (First revision) (ISO 14001: 2004, IDT)
Malaysian Standard
RACK 2
MS ISO
14004
1995
MS ISO/DIS 14004: 1995 (P)
Environmental management systems - General guidelines principles, systems and supporting techniques
Malaysian Standard
RACK 2
MS ISO
14004
1997
MS ISO 14004: 1997
General guidelines in principles, systems and supporting techniques
Malaysian Standard
RACK 2
MS ISO
14004
2004
MS ISO 14004: 2004
Environmental management systems - General guidelines on principles, systems and support techniques (First revision) (ISO 14004: 2004, IDT)
Malaysian Standard
RACK 2
MS ISO
14010
1995
MS ISO/DIS 14010: 1995
Guidelines for environmental auditing - General principles
Malaysian Standard
RACK 2
MS ISO
14010
1997
MS ISO 14010: 1997
Guidelines for environmental auditing - General principles
Malaysian Standard
RACK 2
MS ISO
14011
1995
MS ISO/DIS 14011: 1995 (P)
Guidelines for environmental auditing - Audit procedures - Auditing of environmental management systems
Malaysian Standard
RACK 2
MS ISO
14011
1997
MS ISO 14011: 1997
Guidelines for environmental auditing - Audit procedures - Auditing of environmental management systems
Malaysian Standard
RACK 2
MS ISO
14012
1995
MS ISO/DIS 14012: 1995 (P)
Guidelines for environmental auditing - Qualification criteria for environmental auditors
Malaysian Standard
RACK 2
MS ISO
14012
1997
MS ISO 14012: 1997
Guidelines for environmental auditing - Qualification criteria for environmental auditors
Malaysian Standard
RACK 2
MS ISO
14015
2003
MS ISO 14015: 2003
Environmental management - environmental assessment of sites and organizations (EASO) (ISO 14015: 2001, IDT)
Malaysian Standard
RACK 2
MS ISO
14020
1999
MS ISO 14020: 1999
Environmental labels and declarations - General principles (ISO 14020: 1998 [E], IDT)
Malaysian Standard
RACK 2
MS ISO 11095: 2001 MS ISO 114831: 2001 MS ISO 114832: 2002
Linear calibration using reference materials (ISO 11095: 1996, IDT) Capability of detection - Part 1: Terms and definitions (ISO 11843-1: 1997, IDT) Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2: 2000, IDT)
Malaysian Standard Malaysian Standard Malaysian Standard
RACK 2 RACK 2 RACK 2
Page 42 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
14021
2000
MS ISO 14021: 2000
Environmental labels and declarations - Self declared environmental claims (Type II enviromental labelling ) (ISO 14021: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
I4024
2000
MS ISO 14024: 2000
Environmental labels and declarations - Self declared environmental claims (Type I enviromental labelling - Principles and procedures) (ISO 14024: 1999 [E], IDT)
Malaysian Standard
RACK 2
MS ISO
14040
1998
MS ISO 14040: 1998
Environmental management - Life cycle assessment - Principles and framework
Malaysian Standard
RACK 2
MS ISO
14041
2000
MS ISO 14041: 2000
Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis (ISO 14041: 1998, IDT)
Malaysian Standard
RACK 2
MS ISO
14121
2004
MS ISO 14121: 2004
Safety of machinery - priciples of risk assesment (ISO 14121: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
14122
2003
MS ISO 141222: 2003
Safety of machinery - Permanent means of access to machinery - Part 2: Working plantforms and walkways (ISO 14122-2: 2001, IDT)
Malaysian Standard
RACK 2
MS ISO
13849
2008
MS ISO 138491: 2008
Safety of machinery - Safety - Related parts of control systems - Part 1: General principles for design (First revision) (ISO 13849-1: 2006, IDT)
Malaysian Standard
RACK 2
MS ISO
13856
2003
MS ISO 138561: 2003
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for design and testing of pressure sensitive mats and pressure sensitive floors (ISO 13856-1: 2001, IDT)
Malaysian Standard
RACK 2
MS ISO
13856
2006
MS ISO 138562: 2006
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for design and testing of pressure sensitive edges and pressure sensitive bars (ISO 13856-2: 2005, IDT)
Malaysian Standard
RACK 2
MS ISO
13856
2008
MS ISO 138563: 2008
Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for design and testing of pressure sensitive bumpers,plates, wires and similar devices and pressure sensitive bars (ISO 13856-3: 2005, IDT)
Malaysian Standard
RACK 2
MS ISO
15630
2012
MS ISO 156301: 2012
Steel for the reinforcement and presstessing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1: 2010, IDT)
Malaysian Standard
RACK 2
MS ISO
15630
2012
MS ISO 156302: 2012
Steel for the reinforcement and presstessing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2: 2010, IDT)
Malaysian Standard
RACK 2
MS ISO
15630
2012
MS ISO 156303: 2009
Steel for the reinforcement and presstessing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3: 2002, IDT)
Malaysian Standard
RACK 2
MS ISO
19011
2003
MS ISO 19011: 2003
Guidelines for quality and/or environmental management systems auditing (ISO 190111: 2002,IDT)
Malaysian Standard
RACK 2
MS ISO
19113
2003
MS ISO 19113: 2003
Geographic information - quality principles (ISO 19113: 2002, IDT)
Malaysian Standard
RACK 2
MS ISO
50001
2011
MS ISO 50001: 2011
Energy management systems - requirements with guidance for use (ISO 50001: 2011, IDT)
Malaysian Standard
RACK 2
MS ISO
2859
2001
MS ISO 2859-1: 2001
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot by lot inspection (ISO 2859-1: 1999, IDT)
Malaysian Standard
RACK 2
Page 43 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
2859
2000
MS ISO 2859-3: 2000
Sampling procedures for inspection by attributes - Part 3: Skip lot sampling procedures (ISO 2859-3: 1991, IDT)
Malaysian Standard
RACK 2
MS ISO
3534
1999
MS ISO 3534-1: 1999
Statistics - Vocabulary and symbols - Part 1: Probability and general statistical terms (ISO 3534-1: 1993, IDT)
Malaysian Standard
RACK 2
MS ISO
1745
1992
MS ISO 1745: 1992
Information processing - Basic mode control procedures for data communication systems
Malaysian Standard
RACK 2
MS ISO
1073
1993
MS ISO 1073-2: 1993
Alphanumeric character sets for optical recognition - Part 2: Character set OCR B shapes and dimensions of the printed image
Malaysian Standard
RACK 2
MS ISO
965
2002
MS ISO 965-1: 2002
ISO general purpose metric screw threads - tolerances - Part 1: Principles and basic data (ISO 965-1: 1998, IDT)
Malaysian Standard
RACK 2
MS ISO
727
1997
MS ISO 727: 1997
Fittings of Unplasticized Polyvinyl Chloride (PVC-U) , Chlorinated Polyvinyl Chloride (PVC-C) or Acrtlonitrile Butadiene Styrene (ABS) with plain sockets for pipes under pressure - dimensions of sockets - metric series
Malaysian Standard
RACK 2
MS ISO
740
1981
MS ISO
1831
1993
MS ISO
1860
1994
MS ISO
2375
1993
MS ISO
2382
1993
MS ISO
2398
2002
MS ISO 2398: 2002
Rubber hose, textile reinforced for compressed air - Specification (ISO 2398: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
2602
1994
MS ISO 2602: 1994
Statistical interpretation of test results - estimation of the mean - confidence interval
Malaysian Standard
RACK 2
MS ISO
3951
1994
MS ISO 3951: 1994
Sampling procedures and charts for inspection by variables for percent nonconforming
Malaysian Standard
RACK 2
MS ISO
4057
1994
MS ISO 4057: 1994
Information processing - Dara interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase encoded
Malaysian Standard
RACK 2
MS ISO
4341
1994
MS ISO 4341: 1994
Information processing - magnetic tape cassette and cartridge labelling and file structure for information interchange
Malaysian Standard
RACK 2
MS ISO
4902
1992
MS ISO 4902: 1992
Information technology - Data communication - 37 pole DTE/DCE interface connector and contact number assignments
Malaysian Standard
RACK 2
MS ISO
4903
1992
MS ISO 4903: 1992
Information technology - Data communication - 15 pole DTE/DCE interface connector and contact number assignments
Malaysian Standard
RACK 2
MS ISO
5138
1993
MS ISO 5138-2: 1993
Office machines - vocabulary - section 2: Duplicators
Malaysian Standard
RACK 2
MS ISO 740: 1981 MS ISO 1831: 1993 MS ISO 1860: 1994 MS ISO 2375: 1993 MS ISO 238225: 1993
Specification for hot dip galvanized coatings on iron and steeel articles Printing specification for optical characteristic recognition Information processing - precision reels for magnetic tape used in interchage instrumentation applications Data processing - procedures for registration of escape sequences Information technology - vocabulary Part 25: Local Area Networks
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 2 RACK 2 RACK 2 RACK 2 RACK 2
Page 44 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
5138
1993
MS ISO 5138-3: 1993
Office machines - vocabulary - section 3: Addressing machines
Malaysian Standard
RACK 2
MS ISO
5138
1993
MS ISO 5138-4: 1993
Office machines - vocabulary - section 4: Letter opening machines
Malaysian Standard
RACK 2
MS ISO
5138
1993
MS ISO 5138-5: 1993
Office machines - vocabulary - section 5: Letter folder machines
Malaysian Standard
RACK 2
MS ISO
5138
1993
MS ISO 5138-7: 1993
Office machines - vocabulary - section 7: Postal franking machines
Malaysian Standard
RACK 2
MS ISO
5138
1993
MS ISO 5137-9: 1993
Office machines - vocabulary - section 9: Typewriters
Malaysian Standard
RACK 2
MS ISO
6596
1994
MS ISO 6596-2: 1994
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridge using two- frequency recording at 7 958 ftprad, 1,9 tp, (48 tpi) on one side - Part 2: track format
Malaysian Standard
RACK 2
MS ISO
6385
2005
MS ISO
6350
2002
MS ISO
6596
1994
MS ISO 6596-2: 1994
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridge using two- frequency recording at 7 958 ftprad, 1,9 tp, (48 tpi) on one side - Part 2: Dimensional, physical and magnetic characteristics
Malaysian Standard
RACK 2
MS ISO
6630
1993
MS ISO 6630: 1993
Documentation - bibliographic control characters
Malaysian Standard
RACK 2
MS ISO
5652
1994
MS ISO 5652: 1994
Information processing - 9 track, 12,7 mm (0.5 in) wide magnetic tape for information interchange - format and recording, using group coding at 246 cpmm (6 250 cpi)
Malaysian Standard
RACK 2
MS ISO
5725
2002
MS ISO 5725-1: 2002
Accuracy (Trueness and Precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-7: 1994, IDT)
Malaysian Standard
RACK 2
MS ISO
5725
2002
MS ISO 5725-2: 2002
Accuracy (Trueness and Precision) of measurement methods and results - Part 2: Basic method for the determination of repeatabilty and reproducibility of a standard measurement method (ISO 5725-2: 1994, IDT)
Malaysian Standard
RACK 2
MS ISO
5725
2002
MS ISO 5725-4: 2002
Accuracy (Trueness and Precision) of measurement methods and results - Part 4: Basic method for the determination of the trueness of a standard measurement method (ISO 5725-4: 1994, IDT)
Malaysian Standard
RACK 2
MS ISO
5725
2002
MS ISO 5725-5: 2002
Accuracy (Trueness and Precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5: 1998, IDT)
Malaysian Standard
RACK 2
MS ISO
6093
1993
MS ISO 6093: 1993
Information processing - representation of numerical values in characters strings for information interchange
Malaysian Standard
RACK 2
MS ISO 6385: 2005 MS ISO 6350: 2002
Ergonomic principles in the design of work systems (ISO 6385: 2004, IDT) Protective clothing - Protection against liquid chemicals - determination of resistance of materials to penetration by liquids (ISO 6530: 1990, IDT)
Malaysian Standard Malaysian Standard
RACK 2 RACK 2
Page 45 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
7480
1992
MS ISO 7480: 1992
Information technology - telecommunications and information exchange between systems - start stop transmission signal quality at DTE/DCE interfaces
Malaysian Standard
RACK 2
MS ISO
7487
1994
MS ISO 7487-2: 1994
Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ft[rad, 1,9 tp, (48 tpi), on both sides - ISO type 202 - Part 2: Track format A
Malaysian Standard
RACK 2
MS ISO
7487
1994
MS ISO 7487-3: 1994
Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ft[rad, 1,9 tp, (48 tpi), on both sides - ISO type 202 - Part 3: Track format B
Malaysian Standard
RACK 2
MS ISO
7665
1994
MS ISO 7665: 1994
Information processing -file structure and labelling of flexible disk cartridges for information interchange
Malaysian Standard
RACK 2
MS ISO
7776
1993
MS ISO 7776: 1993
Information processing systems - Data communication - high level data link control procedures - description of the X.25 Lapb - Compactible DTE data link procedures
Malaysian Standard
RACK 2
MS ISO
7929
1994
MS ISO 7929: 1994
Information processing - magnetic disk for data storage devices 83 000 flux transitions per track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner diameter
Malaysian Standard
RACK 2
MS ISO
8063
1994
MS ISO 8063-2: 1994
Information processing - Data interchange pm 6,30 mm (0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi) - Part 2: Track format and method of recording for data interchange in start/stop mode
Malaysian Standard
RACK 2
MS ISO
7966
2000
MS ISO
8330
2002
MS ISO
8378
1994
MS ISO 8378-2: 1994
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958ftprad, 3,8 tpmm (96 tpi) on both sides - Part 2: Track format A
Malaysian Standard
RACK 2
MS ISO
8378
1994
MS ISO 8378-3: 1994
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958ftprad, 3,8 tpmm (96 tpi) on both sides - Part 3: Track format B
Malaysian Standard
RACK 2
MS ISO
8423
1994
MS ISO 8423: 1994
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
Malaysian Standard
RACK 2
MS ISO
8462
1994
MS ISO 8462-1: 1994
Information processing - Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftp MM (10 000 ftpi), 39 cpmm (1 000 cpi) - Part 1: Mechanical, physical and magnetic properties
Malaysian Standard
RACK 2
MS ISO
8462
1994
MS ISO 8462-2: 1994
Information processing - Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftp MM (10 000 ftpi), 39 cpmm (1 000 cpi) - Part 2: Streaming mode
Malaysian Standard
RACK 2
MS ISO 7966: 2000 MS ISO 8330: 2002
Acceptance control charts (ISO 7966: 1993, IDT) Rubber and plastic hoses and hose assemblies - vocabulary (ISO 8330: 1998, IDT)
Malaysian Standard Malaysian Standard
RACK 2 RACK 2
Page 46 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
8630
1994
MS ISO 8630-1: 1994
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Part 1: Dimensional, physical and magnetic characteristics
Malaysian Standard
RACK 2
MS ISO
8630
1994
MS ISO 8630-2: 1994
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Part 2: Track format A for 77 tracks
Malaysian Standard
RACK 2
MS ISO
8630
1994
MS ISO 8630-3: 1994
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Part 3: Track format B for 80 tracks
Malaysian Standard
RACK 2
MS ISO
8631
1992
MS ISO 8631: 1992
Information processing - program constructs and conventions for their representation
Malaysian Standard
RACK 2
MS ISO
8632
1992
MS ISO 8632-1: 1992
Information technology - Computer graphics - metalfile for the storage and transfer of picture description information Part 1: Functional specification
Malaysian Standard
RACK 2
MS ISO
8632
1992
Information technology - Computer graphics - metalfile for the storage and transfer of picture description information Part 2: Character encoding
MS ISO
9001
2000
MS ISO
9001
2015
MS ISO 8632-2: 1992 MS ISO 9001: 2000 MS ISO 9001: 2015
Malaysian Standard Malaysian Standard Malaysian Standard
MS ISO
9543
1992
MS ISO 9543: 1992
Information processing systems - information exchange between systems synchocnous transmission signal quality at DTE/DCE interfaces
Malaysian Standard
RACK 2
MS ISO
9660
1994
MS ISO 9660: 1994
Information processing - Volume and file structure of CD-ROM for information interchange
Malaysian Standard
RACK 2
Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 1: Syntax rules common to all parts, together with syntax service directories for each of the parts (ISO 9735-2: 1998, IDT)
Malaysian Standard
RACK 2
Quality management systems - Requirements (ISO 9000: 2000, IDT) Quality management systems - Requirements (Second revision) (ISO 9001: 2015, IDT)
RACK 2 RACK 2 RACK 2
MS ISO
9735
2000
MS ISO 9735-1: 2000
MS ISO
9735
2000
MS ISO 9735-2: 2001
Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 2: Syntax rules specific to batch EDI (ISO 9735-2: 1998, IDT)
Malaysian Standard
RACK 2
MS ISO
9735
2000
MS ISO 9735-3: 2002
Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 3: Syntax rules specific to interactive EDI (ISO 9735-3: 1998, IDT)
Malaysian Standard
RACK 2
MS ISO
9735
2000
MS ISO 9735-4: 2003
Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 4: Syntax and service report message for batch EDI (message type-control) (ISO 9735-4: 1998, IDT)
Malaysian Standard
RACK 2
Page 47 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY] Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 5: Security rules for batch EDI (Authenticity, integrity and non repudiation of origin) (ISO 9735-5: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
9735
2000
MS ISO 9735-5: 2004
MS ISO
9735
2000
MS ISO 9735-6: 2005
Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 6: Secure authentication and acknowlegment message (message type-autack) (ISO 9735-6: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
9735
2000
MS ISO 9735-7: 2006
Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 7: Security rules for batch EDI (Confidentiality )(ISO 9735-7: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
9735
2000
MS ISO 9735-8: 2007
Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 8: Associated data in EDI (ISO 9735-8: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
9735
2000
MS ISO 9735-9: 2008
Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 9: Security key and certificate management message (Message type - keyman) (ISO 9735-8: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
9735
2000
MS ISO 9735-9: 2009
Electronic data interchange for administration, commerce and transport (EDIFACT) application level syntax rules (syntax version number : 4) - Part 9: Security key and certificate management message (Message type - keyman) (ISO 9735-8: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
73
2010
MS ISO GUIDE 73: 2010
Risk management - Vocabulary (ISO GUIDE 73: 2009, IDT)
Malaysian Standard
RACK 2
MS ISO
66
2000
MS ISO/IEC GUIDE 66: 2000
General requirements for bodies operating assessment and certification / registration of environmental management systems (EMS) (ISO/IEC GUIDE 66: 1999 (E), IDT)
Malaysian Standard
RACK 2
MS ISO
65
2000
MS ISO/IEC GUIDE 65: 2000
General requirements for bodies operating product certification systems (ISO/IEC GUIDE 65: 1999(E), IDT)
Malaysian Standard
RACK 2
MS ISO
62
1999
MS ISO/IEC GUIDE 62: 1996
General requirements for bodies operating assessment and certification / registration of quality systems (ISO/IEC GUIDE 62: 1996 (E), IDT)
Malaysian Standard
RACK 2
MS ISO
61
1999
MS ISO/IEC GUIDE 61: 1999
General requirements for assessement and accreditation of certification / registration bodies (ISO/IEC GUIDE 61: 1996 (E), IDT)
Malaysian Standard
RACK 2
MS ISO
58
1999
MS ISO/IEC GUIDE 58: 1999
Calibration and testing laboratory accreditation systems - general requirements for operation and recognition (ISO/IEC GUIDE 58: 1993 (E), IDT)
Malaysian Standard
RACK 2
Page 48 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
43
2000
MS ISO/IEC GUIDE 43-2: 2000
Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC GUIDE 43-2: 1997 (E), IDT)
Malaysian Standard
RACK 2
MS ISO
43
2000
MS ISO/IEC GUIDE 43-1: 2000
Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC GUIDE 43-2: 1997 (E), IDT)
Malaysian Standard
RACK 2
MS ISO
22
2000
MS ISO/IEC GUIDE 22: 2000
General criteria for suppliers's declarations of conformity (ISO/IEC GUIDE 22: 1996 (E), IDT)
Malaysian Standard
RACK 2
MS ISO
1539
1993
MS ISO/IEC 1539: 1993
Information technology - programming languages - Fortran
Malaysian Standard
RACK 2
MS ISO
1863
1994
MS ISO/IEC 1863: 1994
Information processing - 9 track, 12,7 mm (0.5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi) - 32 cpmm (800 cpi)
Malaysian Standard
RACK 2
MS ISO
1864
1994
MS ISO/IEC 1864: 1994
Information processing - unrecorded 12,7 mm (0.5 in) wide magnetic tape for information interchange - 32 ftpmm (800 ftpi) NRZ1 126 ftpmm (3 20c ftpi) phase encoded and 356 ftpmm (9 042 ftpi) NRZ1
Malaysian Standard
RACK 2
MS ISO
2022
1993
MS ISO/IEC 2022: 1993
Information processing - ISO 7 bit and 8 bit coded character sets - code extension techniques
Malaysian Standard
RACK 2
MS ISO
2593
1995
MS ISO/IEC 2593: 1995
Information technology - telecommunications and information exchange between systems - 34 pole DTE/DCE interface connector mateability dimensions and contact number assignments
Malaysian Standard
RACK 2
MS ISO
3788
1994
MS ISO/IEC 3788: 1994
Information technology - 9 track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3 200 ftpi) - 63 cpmm (1 600 cpi)
Malaysian Standard
RACK 2
MS ISO
4873
1993
MS ISO/IEC 4873: 1993
Information technology - ISO 8 bit code for information interchange - structure and rules for immplementation
Malaysian Standard
RACK 2
MS ISO
6429
1999
MS ISO/IEC 6429: 1999
Information technology - control functions for coded character sets (First revision)
Malaysian Standard
RACK 2
MS ISO
6937
2003
MS ISO/IEC 6937: 2003
Information technology - coded graphic character set for text communication - Latin alphabet (First revision (ISO/IEC 6937: 2001, IDT)
Malaysian Standard
RACK 2
MS ISO
7185
1993
MS ISO/IEC 7185: 1993
Information technology - programming languages - Pascal
Malaysian Standard
RACK 2
MS ISO
7487
1994
MS ISO/IEC 7487-1: 1994
Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi) on both sides - ISO type 202 - Part 1: Dimensional, physical and magnetic characteristics
Malaysian Standard
RACK 2
MS ISO
7498
1995
MS ISO/IEC 7487-2: 1995
Information technology - Open systems interconnection - Basic reference model - Part 2: Security architecture
Malaysian Standard
RACK 2
Page 49 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
7498
1995
MS ISO/IEC 7498-3: 1995
Information technology - Open systems interconnection - Basic reference model - Part 3: Naming and addressing
Malaysian Standard
RACK 2
MS ISO
7810
1999
MS ISO/IEC 7810: 1999
Identification cards - physical charateristics (First revision)
Malaysian Standard
RACK 2
MS ISO
7811
1998
MS ISO/IEC 7811-2: 1998
Identification cards - recording technique - Part 2: Magnetic stripe (First revision)
Malaysian Standard
RACK 2
MS ISO
7811
1998
MS ISO/IEC 7811-4: 1998
Identification cards - recording technique - Part 4: Location of read-only magnetic tracks - Track 1 and 2 (First revision)
Malaysian Standard
RACK 2
MS ISO
7811
1998
MS ISO/IEC 7811-5: 1998
Identification cards - recording technique - Part 5: Location of read write magnetic track - Track 3
Malaysian Standard
RACK 2
MS ISO
7811
1998
MS ISO/IEC 7811-6: 1998
Identification cards - recording technique - Part 6: Magnetic stripe - High coercivity
Malaysian Standard
RACK 2
MS ISO
7812
1998
MS ISO/IEC 7812-1: 1998
Identification cards - Identification of issues - Part 1: Numbering system (First revision)
Malaysian Standard
RACK 2
MS ISO
7812
1998
MS ISO/IEC 7812-2: 1998
Identification cards - Identification of issues - Part 2: Application and registration procedures
Malaysian Standard
RACK 2
MS ISO
7813
1998
MS ISO/IEC 7813: 1998
Identification cards - financial transaction cards
Malaysian Standard
RACK 2
MS ISO
7816
2003
MS ISO/IEC 7816-3: 2003
Information technology - Identification cards - Integrated circuit (s) cards with contacts - Part 3: Electronic signals and transmission protocols (First revision) (ISO/IEC 78163: 1997, IDT)
Malaysian Standard
RACK 2
MS ISO
7816
2003
MS ISO/IEC 7816-4: 2003
Information technology - Identification cards - Integrated circuit (s) cards with contacts - Part 4: Interindustry commands for interchange (ISO/IEC 7816-4: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
7816
2003
MS ISO/IEC 7816-5: 2003
Information technology - Identification cards - Integrated circuit (s) cards with contacts - Part 5: Numbering system and registration procedure for application identifiers ( First revision) (ISO/IEC 7816-5: 1994, IDT)
Malaysian Standard
RACK 2
MS ISO
7816
2003
MS ISO/IEC 7816-6: 2003
Information technology - Identification cards - Integrated circuit (s) cards with contacts - Part 6: Interindustry data elements (ISO/IEC 7816-6: 1996, IDT)
Malaysian Standard
RACK 2
MS ISO
7816
2003
MS ISO/IEC 7816-7: 2003
Information technology - Identification cards - Integrated circuit (s) cards with contacts - Part 6: Interindustry data elements (ISO/IEC 7816-6: 1996, IDT)
Malaysian Standard
RACK 2
MS ISO
7816
2003
MS ISO/IEC 7816-8: 2003
Information technology - Identification cards - Integrated circuit (s) cards with contacts - Part 6: Security related interindustry commands (ISO/IEC 7816-8: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
7816
2003
MS ISO/IEC 7816-9: 2003
Information technology - Identification cards - Integrated circuit (s) cards with contacts - Part 9: Additional interidustry commands and security attributes (ISO/IEC 7816-9: 2000, IDT)
Malaysian Standard
RACK 2
Page 50 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
7816
2003
MS ISO/IEC 7816-10: 2003
Information technology - Identification cards - Integrated circuit (s) cards with contacts - Part 10: Electronic signals and answer to reset for synchronous cards (ISO/IEC 781610: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
7826
1995
MS ISO/IEC 7826-1: 1995
Information technology - General structure for the interchange of code values - Part 1: Identification of coding schemes
Malaysian Standard
RACK 2
MS ISO
7826
1995
MS ISO/IEC 7826-2: 1995
Information technology - General structure for the interchange of code values - Part 2: Registration of coding schemes
Malaysian Standard
RACK 2
MS ISO
8481
1998
MS ISO/IEC 8481: 1998
Information technology - Telecommunications and information exchange between systems -DTE to DTE Direct connections
Malaysian Standard
RACK 2
MS ISO
8482
1995
MS ISO/IEC 8482: 1995
Information technology - Telecommunications and information exchange between systems - Twisted pair multipoint interconnections
Malaysian Standard
RACK 2
MS ISO
8651
1993
MS ISO/IEC 8651-4: 1993
Information technology - Computer graphics - Graphical Kernel System (GKS) language bindings - Part 4: C
Malaysian Standard
RACK 2
MS ISO
8802
1996
MS ISO/IEC 8802-2: 1996
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Part 2: Logical link control
Malaysian Standard
RACK 2
MS ISO
8802
1996
MS ISO/IEC 8802-3: 1996
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
Malaysian Standard
RACK 2
MS ISO
8802
1996
MS ISO/IEC 8802-4: 1996
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Part 3: Token passing bus access method and physical layer specifications
Malaysian Standard
RACK 2
MS ISO
9126
1993
MS ISO/IEC 9126: 1993
Information technology - Software product evaluation - Quality characteristics and guidelines for their use
Malaysian Standard
RACK 2
MS ISO
9171
1994
MS ISO/IEC 9171: 1994
Information technology - 130 mm optical disk cartridge, write once, for information interchange - Part 1: Unrecorded optical disk cartridge
Malaysian Standard
RACK 2
MS ISO
9281
1993
MS ISO/IEC 9281-1: 1993
Information technology - Picture coding methods - Part 1: Identification
Malaysian Standard
RACK 2
MS ISO
9293
1994
MS ISO/IEC 9293: 1994
Information technology - Volume and file structure of disk cartridges for information interchange
Malaysian Standard
RACK 2
MS ISO
9171
1994
MS ISO/IEC 9171-2: 1994
Information technology - 130 mm optical disk cartridge, write once, for information interchange - Part 2: Recording format
Malaysian Standard
RACK 2
MS ISO
8802
1996
MS ISO/IEC 8802-7: 1996
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Part 7:Slotted ring access method and physical layer specifications
Malaysian Standard
RACK 2
MS ISO
8806
1993
MS ISO/IEC 8806-4: 1993
Information technology - Computer graphics - Graphical Kernel System for three dimensions (GKS-3D) language bindings - Part 4: C
Malaysian Standard
RACK 2
Page 51 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
8880
1995
MS ISO/IEC 8880-1: 1995
Information technology - Telecommunications and information exchange between systems - Protocol combinations to provide and support the OSI Network Service - Part 1: General principles
Malaysian Standard
RACK 2
MS ISO
8880
1995
MS ISO/IEC 8880-3: 1995
Information technology - Telecommunications and information exchange between systems - Protocol combinations to provide and support the OSI Network Service - Part 2: Provision and support of the connection mode network service
Malaysian Standard
RACK 2
MS ISO
8885
1995
MS ISO/IEC 8885: 1995
Information technology - Telecommunications and information exchange between systems - High level data link control (HDLC) procedures -General purpose XID frame information field content and format
Malaysian Standard
RACK 2
MS ISO
8802
1996
MS ISO/IEC 8802-6: 1996
Information technology - Telecommunications and information exchange between systems local and metropolitan area networks - Part 6: Distributed Queue Dual Bus (DQDB) access method and physical layer specifications
Malaysian Standard
RACK 2
MS ISO
9075
1996
MS ISO/IEC 9075: 1993
Infromation technology - database languages - SQL
Malaysian Standard
RACK 2
MS ISO
9529
1994
MS ISO/IEC 9529-1: 1994
Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on earch side : Part 1: Dimensional, physical and magnetic characteristics
Malaysian Standard
RACK 2
MS ISO
9529
1994
MS ISO/IEC 9529-2: 1994
Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on earch side : Part 1: Track format
Malaysian Standard
RACK 2
MS ISO
9545
1995
MS ISO/IEC 9545: 1995
Infromation tecnology - Open systems interconnection - application layer structure
Malaysian Standard
RACK 2
MS ISO
9579
1995
MS ISO/IEC 9579-1: 1995
Information technology - Open systems interconnection - remote database access - Part 1: Generic model, service and protocol
Malaysian Standard
RACK 2
MS ISO
9529
1996
MS ISO/IEC 9592-4: 1996
Information technology - Compuer graphics - programmers hierarchical interactive graphics systems (PHIGS) : Part 4: PHIGS plus and TC1: 94
Malaysian Standard
RACK 2
MS ISO
9593
1993
MS ISO/IEC 9593-1: 1993
Information technology - Compuer graphics - programmers hierarchical interactive graphics systems (PHIGS) : Part 1: Fortran
Malaysian Standard
RACK 2
MS ISO
9593
1993
MS ISO/IEC 9593-4: 1993
Information technology - Compuer graphics - programmers hierarchical interactive graphics systems (PHIGS) language bindings : Part 4: C
Malaysian Standard
RACK 2
MS ISO
9594
1995
MS ISO/IEC 9594-1: 1995
Information technology - Open systems interconnection - The directory - Part 1: Overview of concepts, models and services
Malaysian Standard
RACK 2
MS ISO
9594
1995
MS ISO/IEC 9594-2: 1995
Information technology - Open systems interconnection - The directory - Part 2: Models
Malaysian Standard
RACK 2
Page 52 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
9594
1995
MS ISO/IEC 9594-3: 1995
Information technology - Open systems interconnection - The directory - Part 3: Abstract service definition
Malaysian Standard
RACK 2
MS ISO
9594
1995
MS ISO/IEC 9594-5: 1995
Information technology - Open systems interconnection - The directory - Part 5: Protocol specification
Malaysian Standard
RACK 2
MS ISO
9594
1995
MS ISO/IEC 9594-6: 1995
Information technology - Open systems interconnection - The directory - Part 6: Selected attribute types
Malaysian Standard
RACK 2
MS ISO
9594
1995
MS ISO/IEC 9594-7: 1995
Information technology - Open systems interconnection - The directory - Part 7: Selected object classes
Malaysian Standard
RACK 2
MS ISO
9596
1995
MS ISO/IEC 9596-1: 1995
Information technology - Open systems interconnection - Common management information protocol - Part 1: Specification
Malaysian Standard
RACK 2
MS ISO
9636
1993
MS ISO/IEC 9636-1: 1993
Information technology - Computer graphics - intercfacing techniques for dialogues with graphical devices (CGI) - Functional specification - Part 1: Overview, profiles and conformance
Malaysian Standard
RACK 2
MS ISO
9636
1993
MS ISO/IEC 9636-2: 1993
Information technology - Computer graphics - intercfacing techniques for dialogues with graphical devices (CGI) - Functional specification - Part 2: Control
Malaysian Standard
RACK 2
MS ISO
9636
1993
MS ISO/IEC 9636-3: 1993
Information technology - Computer graphics - intercfacing techniques for dialogues with graphical devices (CGI) - Functional specification - Part 3: Output
Malaysian Standard
RACK 2
MS ISO
9636
1993
MS ISO/IEC 9636-4: 1993
Information technology - Computer graphics - intercfacing techniques for dialogues with graphical devices (CGI) - Functional specification - Part 4: Segments
Malaysian Standard
RACK 2
MS ISO
9636
1993
MS ISO/IEC 9636-5: 1993
Information technology - Computer graphics - intercfacing techniques for dialogues with graphical devices (CGI) - Functional specification - Part 5: Input and echoing
Malaysian Standard
RACK 2
MS ISO
9636
1993
MS ISO/IEC 9636-6: 1993
Information technology - Computer graphics - intercfacing techniques for dialogues with graphical devices (CGI) - Functional specification - Part 6: Raster
Malaysian Standard
RACK 2
MS ISO
9637
1996
MS ISO/IEC 9636-7-1: 1994
Information technology - Computer graphics - intercfacing techniques for dialogues with graphical devices (CGI) - Data stream binding - Part 1: Character encoding
Malaysian Standard
RACK 2
MS ISO
9637
1996
MS ISO/IEC 9636-7-2: 1996
Information technology - Computer graphics - intercfacing techniques for dialogues with graphical devices (CGI) - Data stream binding - Part 2: Binary encoding
Malaysian Standard
RACK 2
MS ISO
9646
1996
MS ISO/IEC 9646-1: 1996
Information technology - OSI - Conformance testing methodology and framework Part 1: General concepts
Malaysian Standard
RACK 2
MS ISO
9646
1996
MS ISO/IEC 9646-2: 1996
Information technology - OSI - Conformance testing methodology and framework Part 2: Abstract test suite specification
Malaysian Standard
RACK 2
MS ISO
9646
1996
MS ISO/IEC 9646-4: 1996
Information technology - OSI - Conformance testing methodology and framework Part 4: The three and combined notation (TTCN)
Malaysian Standard
RACK 2
Page 53 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
9646
1996
MS ISO/IEC 9646-5: 1996
Information technology - OSI - Conformance testing methodology and framework Part 5: Requirements on test laboratories and clients for the conformance assessement process
Malaysian Standard
RACK 2
MS ISO
9661
1994
MS ISO/IEC 9661: 1994
Information processing systems - Data interchange on 12,7 mm wide magnetic tape cartridges - 18 tracks, 1491 data bytes per millimetre
Malaysian Standard
RACK 2
MS ISO
9834
1996
MS ISO/IEC 9834-1: 1996
Information technology - OSI - Procedures for the operation od OSI registration authorities Part 1: General procedures
Malaysian Standard
RACK 2
MS ISO
9834
1996
MS ISO/IEC 9834-2: 1996
Information technology - OSI - Procedures for the operation od OSI registration authorities Part 2: Registration procedures for OSI document types
Malaysian Standard
RACK 2
MS ISO
9834
1996
MS ISO/IEC 9834-4: 1996
Information technology - OSI - Procedures for the operation od OSI registration authorities Part 4: Register of VTE profiles
Malaysian Standard
RACK 2
MS ISO
9834
1996
MS ISO/IEC 9834-5: 1996
Information technology - OSI - Procedures for the operation od OSI registration authorities Part 4: Register of VTE control objects definitions
Malaysian Standard
RACK 2
MS ISO
9834
1996
MS ISO/IEC 9834-6: 1996
Information technology - OSI - Procedures for the operation od OSI registration authorities Part 4: Application processes and application entities
Malaysian Standard
RACK 2
MS ISO
9899
2003
MS ISO/IEC 9899: 2003
Programming language - C (ISO/IEC 9899: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
9983
1994
MS ISO/IEC 9983: 1994
Information processing systems - designation of unrecorded flexible disk cartridge
Malaysian Standard
RACK 2
MS ISO
9995
2001
MS ISO/IEC 9995-1: 2001
Information technology - Keyboard layouts for text and office systems - Part 1: General principles governing keyboard layouts (ISO/IEC 9995-1: 1994, IDT)
Malaysian Standard
RACK 2
MS ISO
9945
1995
MS ISO/IEC 9945-1: 1995
Information technology - portable operating system interface (POSIX) - Part 1: system application program interface (API) [C Language]
Malaysian Standard
RACK 2
Information technology - Telecommunications and information exchange between systems - Transport comformance testing for connection mode transport protocol operationg over connection - mode network service - Part 3: Transport test management protocol specification
Malaysian Standard
RACK 2
MS ISO
10025
1995
MS ISO/IEC 10025-3: 1995
MS ISO
10034
1994
MS ISO/IEC 10034: 1994
Guidelines for the preparation of conformity clauses in programming language standards
Malaysian Standard
RACK 2
MS ISO
10149
1994
MS ISO/IEC 10149: 1994
Information technology - Data intechange on read only 120 mm optical data disks (CDROM)
Malaysian Standard
RACK 2
MS ISO
10160
1996
MS ISO/IEC 10160: 1996
Information and documentation - OSI - Interlibrary loan application service definition
Malaysian Standard
RACK 2
MS ISO
10164
1995
MS ISO/IEC 10164-1: 1995
Information and documentation - Open systems interconnection - Systems management : Object management function
Malaysian Standard
RACK 2
MS ISO
10164
1995
MS ISO/IEC 10164-2: 1996
Information and documentation - Open systems interconnection - Systems management : State management function
Malaysian Standard
RACK 2
Page 54 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
10164
1995
MS ISO/IEC 10164-3: 1995
Information and documentation - Open systems interconnection - Systems management : Attributes for representing relationships
Malaysian Standard
RACK 2
MS ISO
10164
1995
MS ISO/IEC 10164-4: 1995
Information and documentation - Open systems interconnection - Systems management : Alarm reporting function
Malaysian Standard
RACK 2
MS ISO
10164
1995
MS ISO/IEC 10164-5: 1995
Information and documentation - Open systems interconnection - Systems management : Event report management function
Malaysian Standard
RACK 2
MS ISO
10164
1995
MS ISO/IEC 10164-6: 1995
Information and documentation - Open systems interconnection - Systems management : Log control function
Malaysian Standard
RACK 2
MS ISO
10164
1995
MS ISO/IEC 10164-7: 1995
Information and documentation - Open systems interconnection - Systems management : Security alarm reporting function
Malaysian Standard
RACK 2
MS ISO
10164
1995
MS ISO/IEC 10164-8: 1995
Information and documentation - Open systems interconnection - Systems management : Security audit trail function
Malaysian Standard
RACK 2
MS ISO
10164
1998
MS ISO/IEC 10164-10: 1998
Information and documentation - Open systems interconnection - Systems management : Usage metering function for accounting purposes
Malaysian Standard
RACK 2
MS ISO
10164
1998
MS ISO/IEC 10164-13: 1998
Information and documentation - Open systems interconnection - Systems management : Summarization function
Malaysian Standard
RACK 2
MS ISO
10164
1998
MS ISO/IEC 10164-17: 1998
Information and documentation - Open systems interconnection - Systems management : change over function
Malaysian Standard
RACK 2
MS ISO
10165
1995
MS ISO/IEC 10165-1: 1995
Information technology - Open systems interconnection - structure of management information : Management information model
Malaysian Standard
RACK 2
MS ISO
10165
1995
MS ISO/IEC 10165-4: 1996
Information technology - OSI - Management information services - structure of information management Part 4: Guidelines for the definition of managed objects
Malaysian Standard
RACK 2
MS ISO
10165
1995
MS ISO/IEC 10165-5: 1996
Information technology - OSI - Management information services - structure of information management Part 5: Generic management information
Malaysian Standard
RACK 2
MS ISO
10165
1995
MS ISO/IEC 10165-6: 1996
Information technology - OSI - Management information services - structure of information management Part 5: Requirements and guidelines for implementation conformance statement proforma associated with OSI management
Malaysian Standard
RACK 2
Information technology - Telecommunications and information exchange between systems - List of standard data link layer protocols that utilize high level data link control (HDLC) claseses of proceduress and list of standardized XID format identifiers and private parameter set identification values
Malaysian Standard
RACK 2
MS ISO
10171
1995
MS ISO/IEC 10171: 1995
MS ISO
10177
1996
MS ISO/IEC 10177: 1996
Information technology - Telecommunications and information exchange between systems - Provision of the connection - mode network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet layer protocol
Malaysian Standard
RACK 2
MS ISO
10183
1996
MS ISO/IEC 10183-1: 1996
Information technology - text and office systems - office document architecture (ODA) and interchange format - technical report on ISO 8613 implementation testing - PART 1: Testing methodology
Malaysian Standard
RACK 2
Page 55 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
10183
1996
MS ISO/IEC 10183-2: 1996
Information technology - text and office systems - office document architecture (ODA) and interchange format - technical report on ISO 8613 implementation testing - PART 1: Framework for abstract test cases
Malaysian Standard
RACK 2
MS ISO
10206
1993
MS ISO/IEC 10206: 1993
Information technology - programming languages - extended pascal
Malaysian Standard
RACK 2
MS ISO
10279
1996
MS ISO/IEC 10279: 1993
Information technology - programming languages - Full basic
Malaysian Standard
RACK 2
MS ISO
10588
1995
MS ISO/IEC 10588: 1995
Information technology - Use of X.25 packet layer protocol in conjunction with X.21/X.21 BIS to provide the OSI connection mode network service
Malaysian Standard
RACK 2
MS ISO
10641
1996
MS ISO/IEC 10641: 1996
Information technology - computer graphic and image processing - procedures for registration of graphical items
Malaysian Standard
RACK 2
MS ISO
10728
1995
MS ISO/IEC 10728: 1995
Information technology - information resource dictionary system (IRDS) services interface
Malaysian Standard
RACK 2
MS ISO
10729
1995
MS ISO/IEC 10729-1: 1995
Information technology - Open systems interconnection - conformance test suite for the presentation layer - Part 1: Test suite structure and test purposes for the presentation protocol
Malaysian Standard
RACK 2
MS ISO
10730
1995
MS ISO/IEC 10730: 1995
Information technology - Open systems interconnection - Tutorial on naming and addressing
Malaysian Standard
RACK 2
MS ISO
10731
1995
MS ISO/IEC 10731: 1995
Information technology - Open systems interconnection - Basic reference model conventions for the definition of OSI services
Malaysian Standard
RACK 2
MS ISO
10732
1995
MS ISO/IEC 10732: 1995
Information technology - Use of X.25 packet layer protocol to provide the OSI connection mode network service over the telephone network
Malaysian Standard
RACK 2
MS ISO
10733
1995
MS ISO/IEC 10733: 1995
Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI network layer standards
Malaysian Standard
RACK 2
MS ISO
10735
1995
MS ISO/IEC 10735: 1995
Information technology - Telecommunications and information exchange between systems - Standard group MAC addresses
Malaysian Standard
RACK 2
MS ISO
10737
1995
MS ISO/IEC 10737: 1995
Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI transport layer standards
Malaysian Standard
RACK 2
MS ISO
10739
1996
MS ISO/IEC 10739-1: 1996
Information technology - OSI - Conformance test suite for ISO 9041-1, virtual terminal basic class protocol - Part 1: Test suite structure and test purposes
Malaysian Standard
RACK 2
MS ISO
10740
1996
MS ISO/IEC 10740-1: 1996
Information technology - Text and office systems - referenced data transfer Part 1: Abstract service definition
Malaysian Standard
RACK 2
MS ISO
10740
1996
MS ISO/IEC 10740-2: 1996
Information technology - Text and office systems - referenced data transfer Part 2: Protocol specifications
Malaysian Standard
RACK 2
Page 56 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
10742
1996
MS ISO/IEC 10742: 1996
Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI Data link layer standards
Malaysian Standard
RACK 2
MS ISO
10747
1995
MS ISO/IEC 10747: 1995
Information technology - Telecommunications and information exchange between systems - Protocol for exchange of inter domain routing information among intermediate systems to support forwarding of ISO 8473 PDUs
Malaysian Standard
RACK 2
MS ISO
10918
1995
MS ISO/IEC 10918-1: 1995
Information technology - Digital compession and coding of continuous tone still images : Requirements and guidelines
Malaysian Standard
RACK 2
MS ISO
11172
2003
MS ISO/IEC 11172-1: 2003
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 1: Systems (ISO/IEC 11172-1: 1993, IDT)
Malaysian Standard
RACK 2
MS ISO
11172
2003
MS ISO/IEC 11172-2: 2003
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 2: Video (ISO/IEC 11172-2: 1993, IDT)
Malaysian Standard
RACK 2
MS ISO
11172
2003
MS ISO/IEC 11172-3: 2003
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 3: Audio (ISO/IEC 11172-3: 1993, IDT)
Malaysian Standard
RACK 2
MS ISO
11172
2003
MS ISO/IEC 11172-2: 2003
Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 4: Compliance testing (ISO/IEC 11172-4: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
11179
1995
MS ISO/IEC 11179-3: 1995
Information technology - Specification and standardization of data elements - Part 3: Basic attributes of data elements
Malaysian Standard
RACK 2
MS ISO
11571
1996
MS ISO/IEC 11571: 1996
Information technology - Telecommunications and information exchange between systems - Numbering and sub addressing in private integrated services networks
Malaysian Standard
RACK 2
MS ISO
11572
1996
MS ISO/IEC 11752: 1996
Information technology - Telecommunications and information exchange between systems - Private integrated services network - Circuit mode bearer services interexchange signalling procedures and protocol
Malaysian Standard
RACK 2
MS ISO
11574
1996
MS ISO/IEC 11571: 1996
Information technology - Telecommunications and information exchange between systems - Private integrated services network - Circuit mode 64 Kbit/s bearer services service description, functional capabilities and information flows
Malaysian Standard
RACK 2
MS ISO
13818
2003
MS ISO/IEC 13818-2: 2003
Information technology - Generic coding of moving pictures and associated audio information : Video - Part 2: Amendment 1: Content description data (ISO/IEC 138182: 2000/Amd 1: 2001, IDT)
Malaysian Standard
RACK 2
MS ISO
183886
2003
MS ISO/IEC 13886: 2003
Information technology - language - Independent procedure calling (LIPC) (ISO/IEC 13886: 1996, IDT)
Malaysian Standard
RACK 2
MS ISO
14478
2003
MS ISO/IEC 14478-1: 2003
Information technology - Computer graphic and image processing - Presentation environment for multimedia objects (PREMO) - Part 1: Fundamentals of PREMO (ISO/IEC 14478-1: 1998, IDT)
Malaysian Standard
RACK 2
Page 57 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
14478
2003
MS ISO/IEC 14478-2: 2003
Information technology - Computer graphic and image processing - Presentation environment for multimedia objects (PREMO) - Part 2: Foundation component (ISO/IEC 14478-2: 1998, IDT)
Malaysian Standard
RACK 2
MS ISO
14478
2003
MS ISO/IEC 14478-3: 2003
Information technology - Computer graphic and image processing - Presentation environment for multimedia objects (PREMO) - Part 3: Multimedia systems services (ISO/IEC 14478-3: 1998, IDT)
Malaysian Standard
RACK 2
MS ISO
14496
2003
MS ISO/IEC 14496-2: 2003
Information technology - Coding of audio - Audio visual objects - Part 2: Visual (ISO/IEC 14496-2: 2001, IDT)
Malaysian Standard
RACK 2
MS ISO
14598
2003
MS ISO/IEC 14598-1: 2003
Information technology - Software product evaluation - Part 1: General overview (ISO/IEC 14598-1: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
14598
2003
MS ISO/IEC 14598-2: 2003
Software engineering - product evaluation - Part 2: Planning and management (ISO/IEC 14598-2: 2000, IDT)
Malaysian Standard
RACK 2
MS ISO
14598
2003
MS ISO/IEC 14598-3: 2003
Software engineering - product evaluation - Part 3: Process for acquirers (ISO/IEC 14598-3: 2000, IDT)
Malaysian Standard
RACK 2
MS ISO
14598
2003
MS ISO/IEC 14598-4: 2003
Software engineering - product evaluation - Part 4: Process for acquirers (ISO/IEC 14598-4: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
14598
2003
MS ISO/IEC 14598-5: 2003
Software engineering - product evaluation - Part 5: Process for evaluators (ISO/IEC 14598-5: 1998, IDT)
Malaysian Standard
RACK 2
MS ISO
14764
2003
MS ISO/IEC 14764: 2003
Information technology - software maintenance (ISO/IEC 14764: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
15408
2003
MS ISO/IEC 15408-1: 2003
Information technology - Security techniques - evaluation criteria for IT security: Part 1: Introduction and general model (ISO/IEC 15408-1: 1999, IDT)
Malaysian Standard
RACK 2
MS ISO
17025
2001
MS ISO/IEC 17025: 2001
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025: 1999, IDT)
Malaysian Standard
RACK 2
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks technical report and guidelines : Part 4: Token ring access method and physical layer specifications - fibre optic station attachment
Malaysian Standard
RACK 2
MS ISO
11802
1996
MS ISO/IEC TR 11802-4: 1996
MS ISO
11693
1996
MS ISO/IEC 11693: 1996
Identification cards - optical memory cards - general characteristics
Malaysian Standard
RACK 2
MS ISO
11694
1996
MS ISO/IEC 11694: 1996
Identification cards - optical memory cards - linear recording method : Part 1: Physical characteristics
Malaysian Standard
RACK 2
MS ISO
11770
2003
MS ISO/IEC 11770-1: 2003
Key management - Part 1: Framework (ISO/IEC 11770-1: 1996, IDT)
Malaysian Standard
RACK 2
MS ISO
12075
1996
MS ISO/IEC 12075: 1996
Information technology - customer premises cabling - planning and installation guide to support ISO/IEC 8802-5 token ring stations
Malaysian Standard
RACK 2
MS ISO
12083
1996
MS ISO/IEC 12083: 1996
Information and documentation - electronic manuscript preparation and markup
Malaysian Standard
RACK 2
Page 58 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
12087
1996
MS ISO/IEC 12087-2: 1996
Information technology - computer graphic and image processing - conformance testing of implementation of graphics standards (RA)
Malaysian Standard
RACK 2
MS ISO
12207
2003
MS ISO/IEC 12207: 2003
Information technology - software life cycle processes (ISO/IEC 12207: 1995, IDT)
Malaysian Standard
RACK 2
MS ISO
13213
1996
MS ISO/IEC 13213: 1996
Information technology - Microprocessor systems - control and status register (CSR) architecture for microcomputer buses
Malaysian Standard
RACK 2
MS ISO
13239
2003
MS ISO/IEC 13239: 2003
Information technology - Telecommunications and information exchange between systems - High level data link control (HDLC) procedures - procedures (ISO/IEC 13239: 2000, IDT)
Malaysian Standard
RACK 2
MS ISO
13250
2003
MS ISO/IEC 13250: 2003
Information technology - SGML applications - topic maps (ISO/IEC 13250: 2000, IDT)
Malaysian Standard
RACK 2
MS ISO
13673
2003
MS ISO/IEC 13673: 2003
Information technology - Document processing and related communication conformance testing for standard generalised markup language (SGML) systems (ISO/IEC 13673: 2000, IDT)
Malaysian Standard
RACK 2
MS ISO
10607
1998
MS ISO/IEC ISP 10607-1: 1998
Information technology - International standardized profiles AFTnn - File transfer, access and management - Part 1: Specification of ACSE, presentation and session protocols for the use by FTAM (First revision)
Malaysian Standard
RACK 2
MS ISO
10607
1998
MS ISO/IEC ISP 10607-2: 1998
Information technology - International standardized profiles AFTnn - File transfer, access and management - Part 1: Specification of ACSE, presentation and session protocols for the use by FTAM (First revision)
Malaysian Standard
RACK 2
MS ISO
10607
1998
MS ISO/IEC ISP 10607-4: 1998
Information technology - International standardized profiles AFTnn - File transfer, access and management - Part 4: AFT 12 - Positional file transfer (First revision)
Malaysian Standard
RACK 2
MS ISO
10607
1998
MS ISO/IEC ISP 10607-5: 1998
Information technology - International standardized profiles AFTnn - File transfer, access and management - Part 5: AFT 22 - Positional file access (First revision)
Malaysian Standard
RACK 2
MS ISO
10607
1998
MS ISO/IEC ISP 10607-6: 1999
Information technology - International standardized profiles AFTnn - File transfer, access and management - Part 6: AFT 3 - File management service (First revision)
Malaysian Standard
RACK 2
MS ISO
10608
1995
MS ISO/IEC ISP 10608-1: 1995
Information technology - International standardized profiles TA nnnn - Connection mode transport service over connectionless mode netwwork service - Part 1: General overview and subnetwork - independent requirements
Malaysian Standard
RACK 2
1995
MS ISO/IEC ISP 10608-5: 1995
Information technology - International standardized profiles TA nnnn - Connection mode transport service over connectionless mode netwwork service - Part 5: TA1111/TA1121 profiles including subnetwork dependent requirements for X.25 packet switched data networks using virtual calls
Malaysian Standard
RACK 2
MS ISO
10608
Page 59 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
10608
1995
MS ISO/IEC ISP 10608-13: 1995
Information technology - International standardized profiles TA nnnn - Connection mode transport service over connectionless mode netwwork service - Part 13: MAC sublayer and physical layer dependent requirements for a token ring LAN subnetwork
Malaysian Standard
RACK 2
MS ISO
10609
1995
MS ISO/IEC ISP 10609-5: 1995
Information technology - International standardized profiles TB, TC, TD and TE Connection mode transport service over connection - mode network services - Part 5: Definition of profiles TB1111/TB1121
Malaysian Standard
RACK 2
MS ISO
10609
1995
MS ISO/IEC ISP 10609-6: 1995
Information technology - International standardized profiles TB, TC, TD and TE Connection mode transport service over connection - mode network services - Part 6: Definition of profiles TC1111/TC1121
Malaysian Standard
RACK 2
MS ISO
10609
1995
MS ISO/IEC ISP 10609-7: 1995
Information technology - International standardized profiles TB, TC, TD and TE Connection mode transport service over connection - mode network services - Part 7: Definition of profiles TD1111/TD1121
Malaysian Standard
RACK 2
MS ISO
10609
1995
MS ISO/IEC ISP 10609-8: 1995
Information technology - International standardized profiles TB, TC, TD and TE Connection mode transport service over connection - mode network services - Part 8: Definition of profiles TE1111/TE1121
Malaysian Standard
RACK 2
MS ISO
10609
1995
MS ISO/IEC ISP 10609-11: 1995
Information technology - International standardized profiles TB, TC, TD and TE Connection mode transport service over connection - mode network services - Part 11: CSMA/CD subnetwork - dependent, media dependent requirements
Malaysian Standard
RACK 2
MS ISO/IEC ISP 10609-12: 1995
Information technology - International standardized profiles TB, TC, TD and TE Connection mode transport service over connection - mode network services - Part 12: Definition of profile TC51, provision of the OSI connection mode tranport service using the OSI connection mode network service in and end system attached toa CSMA/CD LAN
Malaysian Standard
RACK 2
Malaysian Standard
RACK 2
MS ISO
10609
1995
MS ISO
10609
1995
MS ISO/IEC ISP 10609-14: 1995
Information technology - International standardized profiles TB, TC, TD and TE Connection mode transport service over connection - mode network services - Part 14: Definition of profile TC53, provision of the OSI connection mode tranport service using the OSI connection mode network service in and end system attached to a Token Ring LAN
MS ISO
10611
1995
MS ISO/IEC ISP 10611-1: 1995
Information technology - International standardized profiles AMH1N - Message handling systems - common messaging - Part 1: MHS service support
Malaysian Standard
RACK 2
MS ISO
10611
1995
MS ISO/IEC ISP 10611-2: 1995
Information technology - International standardized profiles AMH1N- Message handling systems - common messaging - Part 2: Specification of ROSE, RTSE, ACSE, Presentation and session protocols for use by MHS
Malaysian Standard
RACK 2
MS ISO
10611
1995
MS ISO/IEC ISP 10611-3: 1995
Information technology - International standardized profiles AMH1N - Message handling systems - common messaging - Part 3: AMH11 - Message transfer (P1)
Malaysian Standard
RACK 2
Page 60 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
10613
1995
MS ISO/IEC ISP 10613-3: 1995
Information technology - International standardized profiles RA - Relaying the connectionless - mode network service - Part 3: CSMA/CD LAN subnetwork dependent, media dependent requirements
Malaysian Standard
RACK 2
MS ISO
10613
1995
MS ISO/IEC ISP 10613-5: 1995
Information technology - International standardized profiles RA - Relaying the connectionless - mode network service - Part 5: Definition of profile RA 51.51, relaying the connectioless mode network service between CSMA/CD LAN subnetworks
Malaysian Standard
RACK 2
MS ISO
10613
1995
MS ISO/IEC ISP 10613-7: 1995
Information technology - International standardized profiles RA - Relaying the connectionless - mode network service - Part 7: PSDN subnetwork dependent media dependent requirements for virtual calls over a permanent access
Malaysian Standard
RACK 2
1995
MS ISO/IEC ISP 10613-8: 1995
Information technology - International standardized profiles RA - Relaying the connectionless - mode network service - Part 8: Definition of profile RA51.1111, relaying the connectionless mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access
Malaysian Standard
RACK 2
Malaysian Standard
RACK 2
MS ISO
10613
MS ISO
10613
1995
MS ISO/IEC ISP 10613-9: 1995
Information technology - International standardized profiles RA - Relaying the connectionless - mode network service - Part 9: Definition of profile RA51.1121, relaying the connectionless mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access
MS ISO
11183
1995
MS ISO/IEC ISP 11183-1: 1995
Information technology - International standardized profiles AOM1n OSI management - management communications - Part 1: Specification of ACSE, Presentation and session protocols for use by ROSE and CMISE
Malaysian Standard
RACK 2
MS ISO
11183
1995
MS ISO/IEC ISP 11183-2: 1995
Information technology - International standardized profiles AOM1n OSI management - management communications - Part 2: CMISE/ROSE for AOM12 - Enhanced management communications
Malaysian Standard
RACK 2
MS ISO
11183
1995
MS ISO/IEC ISP 11183-3: 1995
Information technology - International standardized profiles AOM1n OSI management - management communications - Part 2: CMISE/ROSE for AOM12 - Basic management communications
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-1: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 1: FVT211, FVT212 Sequenced and unsequenced application control objects
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-3: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 3: FVT215, FVT216 Application RIO record loading control object, terminal RIO record notification control object
Malaysian Standard
RACK 2
Page 61 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
11185
1995
MS ISO/IEC ISP 11185-4: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 4: FVT217 - Horizontal tabulation control object
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-5: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 5: FVT218 - Logical image control object
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-6: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 6: FVT219 - Status message control object
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-7: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 7: FVT2110 - Entry control control object
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-8: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 8: FVT221 - Forms FEICO (Field Entry Instruction Control Object) No.1
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-9: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 9: FVT222 - Pages FEICO (Field Entry Instruction Control Object) No.1
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-10: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 10: FVT231 - Forms FEPCO (Field Entry Pilot Control Object) No.1
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-11: 1995
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 11: FVT232 - Paged FEPCO (Field Entry Pilot Control Object) No.1
Malaysian Standard
RACK 2
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 12: FVT2116 Generalized TELNET synch control object; FVT2117 - Generalized TELNET signal control object ; FVT2118 - Generalized TELNET; negotiation control object; FVT2119 - Generalized TELNET subnegotiation control object
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-12: 1998
MS ISO
11185
1995
MS ISO/IEC ISP 11185-13: 1998
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of conrol object type definitions - Part 13: FVT2111 - Waiting time control object
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-14: 1998
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of conrol object type definitions - Part 14: FVT2112 - Printer control object
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-15: 1998
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of conrol object type definitions - Part 15: FVT2113 - Field definition management conrol object
Malaysian Standard
RACK 2
Page 62 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS ISO
11185
1995
MS ISO/IEC ISP 11185-16: 1998
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of conrol object type definitions - Part 16: FVT2114 - Terminal signal titles control object
Malaysian Standard
RACK 2
MS ISO
11185
1995
MS ISO/IEC ISP 11185-17: 1998
Information technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of conrol object type definitions - Part 17: FVT2115 - Help text control object
Malaysian Standard
RACK 2
MS IEC
31010
2011
MS IEC
81
1997
MS IEC
155
1996
MS IEC
320
1996
MS IEC
320
1996
MS IEC
335
MS IEC
MS IEC/ISO 31010: 2011 MS IEC 81: 1997 MS IEC 155: 1996 MS IEC 320-1: 1996
Appliance couplers for household and similar general purposes - Part 1: General requirements
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
MS IEC 320-22: 1996
Appliance couplers for household and similar general purposes - Part 2: Interconnection couplers for household and similar equipment
Malaysian Standard
RACK 2
1996
MS IEC 320-226: 1996
Safety of household and similar electrical appliances Part 2: Particular requirements for clocks
Malaysian Standard
RACK 2
364
1996
MS IEC 364-1: 1996
Electrical installations of buildings Part 1: Scope,object and fundamental principles
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-221: 1996
Electrical installations of buildings Part 2: Definitions - Chapter 21: Guide to general terms
Malaysian Standard
RACK 2
MS IEC
335
1996
MS IEC 335-229: 1996
Safety of household and similar electrical appliances Part 2: Particular requirements for battery charges
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-3: 1996
Electrical installations of buildings Part 3: Assessment of general characteristics
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-441: 1996
Electrical installations of buildings Part 4: Protection for safety Chapter 41: Ptotection against electrical shock
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-442: 1996
Electrical installations of buildings Part 4: Protection for safety Chapter 42: Ptotection against thermal effects
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-445: 1996
Electrical installations of buildings Part 4: Protection for safety Chapter 45: Ptotection against undervoltage
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-446: 1996
Electrical installations of buildings Part 4: Protection for safety Chapter 46: Isolation and switching
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-447: 1996
Electrical installations of buildings Part 4: Protection for safety Chapter 47: Application of protective measures for safety Section 470: General Section 471: Measures of protection against eletric shock
Malaysian Standard
RACK 2
Risk management - Risk assessment techniques (IEC/ISO 31010: 2009,IDT) Tubular fluorescent lamps for general lighting service Glow starters for fluorescent lamps
RACK 2 RACK 2 RACK 2 RACK 2
Page 63 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
364
1996
MS IEC 364-4442: 1996
Electrical installations of buildings Part 4: Protection for safety Chapter 44: Protection against overvoltages - Section 442: Protection of low-voltage installations against faults between high voltage systems and earth
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-4473: 1996
Electrical installations of buildings Part 4: Protection for safety Chapter 47: Application of protective measures for safety - Section 473: Measures of protection against overcurrent
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-4481: 1996
Electrical installations of buildings Part 4: Protection for safety Chapter 48: Choice of protective measures as a function of external influences - Section 481: Selection of measures for protection against electric shock in relation to external influences
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-4482: 1996
Electrical installations of buildings Part 4: Protection for safety Chapter 48: Choice of protective measures as a function of external influences - Section 482: Protection against fire
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-551: 1996
Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 51: Common rules
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-552: 1996
Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 52: Wiring systems
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-5551: 1996
Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 55: Other equipment - Section 551: Low voltage generating sets
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-556: 1996
Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 56: Safety services
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-553: 1996
Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 53: Switchgear and controlgear
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-661: 1996
Electrical installations of buildings Part 6: Verification Chapter 61: Initial verification
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-7709: 1996
Electrical installations of buildings Part 7: Requirements for special installations or locations Section 709: Marinas and pleasure craft
Malaysian Standard
RACK 2
MS IEC
364
1996
MS IEC 364-7704: 1996
Electrical installations of buildings Part 7: Requirements for special installations or locations Section 704: Construction and demoliton site installations
Malaysian Standard
RACK 2
MS IEC
432
1996
MS IEC 432-1: 1996
Safety specifications for incandescent lamps: Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
Malaysian Standard
RACK 2
MS IEC
432
1996
MS IEC 432-2: 1996
Safety specifications for incandescent lamps: Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
Malaysian Standard
RACK 2
MS IEC
478
1996
MS IEC 478-2: 1996
Stabilized power supplies, d.c. output Part 2: Rating and performance
Malaysian Standard
RACK 2
MS IEC
598
1997
MS IEC 598-1: 1994
Luminaires - Part 1: General requirements and tests
Malaysian Standard
RACK 2
Page 64 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
598
1997
MS IEC 598-21: 1997
Luminaires - Part 2: Particular requirements Section 1: Fixed general purpose luminaires
Malaysian Standard
RACK 2
MS IEC
598
1997
MS IEC 598-24: 1997
Luminaires - Part 2: Particular requirements Section 4: Portable general purpose luminaires
Malaysian Standard
RACK 2
MS IEC
811
1997
MS IEC 811-11: 1997
Common test methods for insulating and sheating materials of electric cables Part 1: Methods for general application Section 1: Measurement of thickness and overall dimensions - tests for determining the mechanical properties
Malaysian Standard
RACK 2
MS IEC
811
1997
MS IEC 811-12: 1997
Common test methods for insulating and sheating materials of electric cables Part 1: Methods for general application Section 2: Thermal ageing methods
Malaysian Standard
RACK 2
MS IEC
811
1997
MS IEC 811-13: 1997
Common test methods for insulating and sheating materials of electric cables Part 1: Methods for general application Section 3: Methods for determining the density - water absorption tests - shrinkage test
Malaysian Standard
RACK 2
MS IEC
811
1997
MS IEC 811-14: 1997
Common test methods for insulating and sheating materials of electric cables Part 1: Methods for general application Section 4: Tests at low temperature
Malaysian Standard
RACK 2
MS IEC
811
1997
MS IEC 811-21: 1997
Common test methods for insulating and sheating materials of electric cables Part 2: Methods specific to elastomeric compaunds Section 1: Ozone resistance test - hot set test - mineral oil immersion test
Malaysian Standard
RACK 2
MS IEC
811
1997
MS IEC 811-31: 1997
Common test methods for insulating and sheating materials of electric cables Part 3: Methods specific to PVC compaunds Section 1: Pressure for resistance to cracking
Malaysian Standard
RACK 2
MS IEC
811
1997
MS IEC 811-32: 1997
Common test methods for insulating and sheating materials of electric cables Part 3: Methods specific to PVC compaunds Section 2: Loss of mass test - thermal stability test
Malaysian Standard
RACK 2
1997
MS IEC 811-41: 1997
Common test methods for insulating and sheating materials of electric cables Part 4: Methods specific to polyethylene and polypropylene compaunds Section 1: Resistance to environmental stress cracking - wrapping test after thermal ageing in air measurement of the melt flow index - carbon black and/or mineral content measurement in PE
Malaysian Standard
RACK 2
Common test methods for insulating and sheating materials of electric cables Part 5: Methods specific to filling compaunds Section 1: Drop point - separation of oil - lower temparature brittleness - total acid number - absence of corrosive components permittivity at 23⁰c - D.C Resistivity at 23⁰c and 100⁰c
Malaysian Standard
RACK 2
MS IEC
811
MS IEC
811
1997
MS IEC 811-51: 1997
MS IEC
922
1995
MS IEC 922: 1995
Ballasts for discharge lamps (excluding tubular fluorescent lamps) general and safety requirements
Malaysian Standard
RACK 2
MS IEC
923
1995
MS IEC 923: 1995
Auxiliaries for lamps - ballasts for discharge lamps (excluding tubular fluorescent lamps) - performance requirements
Malaysian Standard
RACK 2
MS IEC
928
1995
MS IEC 928: 1995
A.C supplied electronic ballasts for tubular fluorescent lamps general and safety requirements
Malaysian Standard
RACK 2
Page 65 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
929
1995
MS IEC 929: 1995
A.C supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
Malaysian Standard
RACK 2
MS IEC
947
1996
MS IEC 947-1: 1996
Low voltage switchgear and controlgear Part 1: General rules
Malaysian Standard
RACK 2
MS IEC
947
1996
MS IEC 947-41: 1996
Low voltage switchgear and controlgear Part 4: Contractors and motor- starters Section 1: Electromechanical contractors and motor starters
Malaysian Standard
RACK 2
MS IEC
1204
1996
MS IEC 1204: 1996
Low voltage power supply devices, d.c. output - performance characteristics and safety requirements
Malaysian Standard
RACK 2
MS IEC
60188
1999
MS IEC 60188: 1999
High - pressure mercury vapour lamps (IEC 60188: 1974, IDT)
Malaysian Standard
RACK 2
MS IEC
60228
2001
MS IEC 60228: 2001
Conductors of insulated cables (IEC 60228: 1978, First Supplement 228A: 1982 and Amendment 1: 1993, IDT)
Malaysian Standard
RACK 2
MS IEC
60238
1999
MS IEC 60238: 1999
Edison screw lamholders (IEC 60238: 1998, IDT)
Malaysian Standard
RACK 2
MS IEC
60229
2001
MS IEC 60229: 2001
Tests on cable oversheaths which have a special protective function and are applied by extrusion (IEC 60229: 1982, IDT)
Malaysian Standard
RACK 2
MS IEC
60331
2001
MS IEC 6033111: 2001
Tests for electric cables under fire conditions - circuit integrity - Part 11: Apparatus fire alone at a flame temparature of a least 750⁰c (IEC 60331-11: 1999,IDT)
Malaysian Standard
RACK 2
MS IEC
60331
2001
MS IEC 6033121: 2001
Tests for electric cables under fire conditions - circuit integrity - Part 21: Procedures and requirements - cables of rated voltage up to and including 0.6/1.0 kV (IEC 6033121: 1999,IDT)
Malaysian Standard
RACK 2
MS IEC
60331
2001
MS IEC 6033121: 2001
Tests for electric cables under fire conditions - circuit integrity - Part 23: Procedures and requirements - Electric data cables (IEC 60331-23: 1999,IDT)
Malaysian Standard
RACK 2
MS IEC
60331
2001
MS IEC 6033125: 2001
Tests for electric cables under fire conditions - circuit integrity - Part 25: Procedures and requirements - Optical fibre cables (IEC 60331-25: 1999,IDT)
Malaysian Standard
RACK 2
MS IEC
60332
2001
MS IEC 603321: 2001
Tests on electric cables under fire conditions Part 1: Test on a single vertical insulated wire or cable (IEC 60332-1: 1993,IDT)
Malaysian Standard
RACK 2
MS IEC
60335
1999
MS IEC 603352-65: 1999
Safety of household and similar electrical appliances - Part 2: Particular requirements for air cleaning appliances (First revision)
Malaysian Standard
RACK 2
MS IEC
60335
1999
MS IEC 603352-88: 2002
Safety of household and similar electrical appliances - Part 2: Particular requirements for humidifiers intended for use with heating, ventilation or air conditioning systems (IEC 60335-2-88: 1997, IDT)
Malaysian Standard
RACK 2
MS IEC
60335
1999
MS IEC 603352-40: 1999
Safety of household and similar electrical appliances - Part 2: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers
Malaysian Standard
RACK 2
MS IEC
60335
2002
MS IEC 603352-45: 2002
Safety of household and similar electrical appliances - Part 2: Particular requirements for portable heating tools and similar appliances (IEC 60335-2-45: 1996,IDT)
Malaysian Standard
RACK 2
Page 66 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
60360
1999
MS IEC 60360: 1999
Standard method of measurement of lamp cap temperature rise (IEC 60360: 1998, IDT)
Malaysian Standard
RACK 2
MS IEC
60598
2001
MS IEC 605982-9: 2001
Luminares Part 2: Particular requirements Section 9: Photo and film luminaires (Non professional) (IEC 60598-2-9: 1987 and its amendment 1: 1993, IDT)
Malaysian Standard
RACK 2
MS IEC
60400
1999
MS IEC 60400: 1999
Lampholders for tubular fluorescent lamps and starterholders (IEC 60400: 1996, IDT)
Malaysian Standard
RACK 2
MS IEC
60502
1998
MS IEC 605021: 1998
Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um = 1.2 kV) up to 30 Kv (Um = 36 kV) - Part 1: cables for rated voltages of 1 kV (Um = 1.2 Kv) and kV (Um = 3.6 Kv)
Malaysian Standard
RACK 2
MS IEC
60502
1998
MS IEC 605022: 1998
Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um = 1.2 kV) up to 30 Kv (Um = 36 kV) - Part 2: Cables for rated voltages from 6 Kv (Um = 7.2 kV) up to 30 Kv (Um = 36 kV)
Malaysian Standard
RACK 2
Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um = 1.2 kV) up to 30 Kv (Um = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 Kv (Um = 7.2 kV) up to 30 Kv (Um = 36 kV)
Malaysian Standard
RACK 2
MS IEC
60502
1998
MS IEC 605024: 1998
MS IEC
60529
2002
MS IEC 60529: 2002
Degree of protection provided by enclosures (IP Code) (IEC 60529: 1999 and its amendment 1: 1999, IDT)
Malaysian Standard
RACK 2
MS IEC
60598
1998
MS IEC 605982-2: 1998
Luminares Part 2: Particular requirements Section 2: Recessed luminaires
Malaysian Standard
RACK 2
MS IEC
60598
1997
MS IEC 605982-3: 1997
Luminares Part 2: Particular requirements Section 3: Luminaires for road and street lighting
Malaysian Standard
RACK 2
MS IEC
60598
1998
MS IEC 605982-5: 1999
Luminares Part 2: Particular requirements Section 5: Floodlights
Malaysian Standard
RACK 2
MS IEC
60598
1998
MS IEC 605982-8: 1998
Luminares Part 2: Particular requirements Section 8: Handlamps
Malaysian Standard
RACK 2
MS IEC
60598
1998
MS IEC 605982-18: 1998
Luminares Part 2: Particular requirements Section 18: Luminaires for swimming pools and similar applications
Malaysian Standard
RACK 2
MS IEC
60598
1998
MS IEC 605982-20: 1998
Luminares Part 2: Particular requirements Section 20: Lightning chains
Malaysian Standard
RACK 2
MS IEC
60598
1998
MS IEC 605982-25: 2001
Luminares Part 2: Particular requirements Section 25: Luminaires for use on clinical areas of hospitals and health care buildings (IEC 60598-2-25: 1994 and its corrigendum: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
60064
1999
MS IEC 60064: 1999
Tungsten filament lamps for domestic and similar general lighting purposes performance requirements (IEC 60064: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
60065
2003
MS IEC 60065: 2003
Audio, video and similar electronic apparatus - safety requirements (First revision) (IEC 60065: 2001, IDT)
Malaysian Standard
RACK 2
Page 67 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
60947
2000
MS IEC 609473: 2000
Low voltage switchgear and controlgear - Part 3: Switches, disconnectors, switchdisconnectors and fuse combination units (IEC 60947-3: 1999, IDT)
Malaysian Standard
RACK 2
MS IEC
60287
2001
MS IEC 602872-1: 2001
Electric cables - calculation of the current rating - Part 2: Thermal resistance - Section 1: Calculations of thermal resistance (IEC 60287-2-1: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
60287
2001
MS IEC 602872-2: 2001
Electric cables - calculation of the current rating - Part 2: Thermal resistance - Section 1: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation (IEC 60287-2-2: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
60287
2001
MS IEC 602871-2: 2001
Electric cables - calculation of the current rating - Part 2: Current rating equations (100% load factor) and calculations of losses - Section 2: Sheath eddy current loss factors for two circuits in flat formation (IEC 60287-1-2: 1993, IDT)
Malaysian Standard
RACK 2
MS IEC
60947
2000
MS IEC 609472: 2000
Low voltage switchgear and controlgear - Part 2: Circuit breakers (IEC 60947-2: 1998, IDT)
Malaysian Standard
RACK 2
MS IEC
60364
1996
MS IEC 603645-537: 1996
Electrical installations of buildings Part 5: Selection and eraction of electrical equipment - Chapter 53: Switchgear and controlgear - Section 537: Devices for isolation and switching
Malaysian Standard
RACK 2
MS IEC
60364
1996
MS IEC 603645-54: 1996
Electrical installations of buildings Part 5: Selection and eraction of electrical equipment - Chapter 54: Earthing arrangements and protection conductors
Malaysian Standard
RACK 2
MS IEC
60364
1996
MS IEC 603644-443: 1996
Electrical installations of buildings Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 443: Protection against overvoltages of atmospheric origin or due to switching
Malaysian Standard
RACK 2
MS IEC
60364
1996
MS IEC 603647-707: 1996
Electrical installations of buildings Part 7: Requirements for special installations or locations Section 707: Earthing requirements for the installation of data processing equipment
Malaysian Standard
RACK 2
MS IEC
60364
1996
MS IEC 603645-523: 1996
Electrical installations of buildings Part 5: Selection and erection of electrical equipment - Chapter 52: Wiring systems - Section 523: Current carrying capacities
Malaysian Standard
RACK 2
MS IEC
60838
1999
MS IEC 608382-1: 1999
Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 (IEC 60838-2-1: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
60926
2001
MS IEC 60926: 2001
Auxiliaries for lamps - starting devices (other than glow starters) general and safety requirements (IEC 60926: 1995, and its amendment 1: 1999, IDT)
Malaysian Standard
RACK 2
MS IEC
60898
1998
MS IEC 60898: 1998
Electrical accessories - circuit breakers for overcurrent protection for household and similar installations (MCB's)
Malaysian Standard
RACK 2
MS IEC
60983
2002
MS IEC 60983: 2002
Miniature lamps (IEC 60983: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2002
MS IEC 610002-2: 2002
Electromagnetic compatibility (EMC) Part 2: Environment Section 2: Compactability levels for low-frequency conducted disturbance and signalling in public low voltage power supply systems (IEC 61000-2-2: 1990,IDT)
Malaysian Standard
RACK 2
Page 68 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
61000
2002
MS IEC 610002-4: 2002
Electromagnetic compatibility (EMC) Part 2: Environment Section 2: Compactability levels for low-frequency conducted disturbances (IEC 61000-2-4: 1994,IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2002
MS IEC 610002-9: 2002
Electromagnetic compatibility (EMC) Part 2: Environment Section 9: Description of hemp environment - radiation disturbance - basic EMC publication (IEC 61000-2-9: 1996, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2002
MS IEC 610002-10: 2002
Electromagnetic compatibility (EMC) Part 2: Environment Section 10 Description of hemp environment -conducted disturbance (IEC 61000-2-10: 1998, IDT)
Malaysian Standard
RACK 2
MS IEC
60670
2002
MS IEC 60670: 2002
General requirements for enclosures for accessories for household and similar fixed electrical installations (IEC 60670: 1989 and its amendment 1: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
60662
2002
MS IEC 60662: 2002
High - pressure sodium vapour lamps (IEC 60662: 1980, IDT)
Malaysian Standard
RACK 2
MS IEC
60634
1999
MS IEC 60634: 1999
Heat test source (H.T.S) lamps for carrying out heating tests on luminaires (IEC 60634: 1993, IDT)
Malaysian Standard
RACK 2
MS IEC
60809
2001
MS IEC 60809: 2001
Filament lamps for road vehicles - dimensional, electrical and luminpus requirements (IEC 60809: 1995 and its amendment 1: 1996, IDT)
Malaysian Standard
RACK 2
MS IEC
60838
1999
MS IEC 608381: 1999
Miscellaneous lampholders - Part 1: General requirements and tests (IEC 60838-1: 1997, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610003-2: 2000
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 2: Limits for harmonic current emissions (equipment input current ≤ 16A per phase) (IEC 61000-3-2: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2003
MS IEC 610003-2: 2003
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 2: Limits for harmonic current emissions (equipment input current ≤ 16A per phase) (IEC 61000-3-2: 2001, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610003-3: 2000
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 3: Limitation of voltage fluctuations and flicker in low voltage supply systems for equipment with rated current ≤ 16A (IEC 61000-3-3: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610003-5: 2000
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 5: Limitation of voltage fluctuations and flicker in low voltage power supply systems for equipment with rated current greater than16A (IEC 61000-3-5: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610003-5: 2001
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 5: Limitation of voltage fluctuations and flicker in low voltage power supply systems for equipment with rated current greater than16A (IEC 61000-3-5: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2001
MS IEC 610003-6: 2001
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 6: Assessement of emission limits for distoring loads in MV and HV power systems - basic EMC publication (IEC 61000-3-6: 1996, IDT)
Malaysian Standard
RACK 2
Page 69 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
61000
2001
MS IEC 610003-7: 2001
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 7: Assessement of emission limits for fluctuating loads in MV and HV power systems - Basic EMC publication (IEC 61000-3-7: 1996, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2001
MS IEC 610003-8: 2001
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 8: Signalling on low voltage electrical installations - emission levels, frequency bands and electromagnetic disturbance levels (IEC 61000-3-8: 1997, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2002
MS IEC 610004-1: 2002
Electromagnetic compactibility (EMC) - Part 4: Testing and measurement techniques Section 1: Overview of immunity tests basic EMC publication (IEC 61000-4-1: 1992, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610004-2: 2000
Electromagnetic compactibility (EMC) - Part 4: Testing and measurement techniques Section 2: Electrostatic discharge immunity test - Basic EMC Publication (IEC 610004-2: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2001
MS IEC 610004-3: 2001
Electromagnetic compactibility (EMC) - Part 4: Testing and measurement techniques Section 3: Radiated, radio frequency, electromagnetic field immunity test (IEC 610004-3: 1995, and its amendment 1: 1998,IDT) (First revision)
Malaysian Standard
RACK 2
MS IEC
60601
2002
MS IEC 606011-2: 2002
Medical electrical equipment - Part 1: General requirements for safety - Section 2: Collateral standard: Electromagnetic compactibility - Requirements and tests (IEC 60601-1-2: 1993, IDT)
Malaysian Standard
RACK 2
MS IEC
62305
2007
MS IEC 623051: 2007
Protection against lightning - Part 1: General principles (First revision) (IEC 62305-1: 2006, IDT)
Malaysian Standard
RACK 2
MS IEC
62305
2007
MS IEC 623052: 2007
Protection against lightning - Part 2: Risk management (First revision) (IEC 62305-2: 2006, IDT)
Malaysian Standard
RACK 2
MS IEC
62305
2007
MS IEC 623053: 2007
Protection against lightning - Part 3: Physical damage to structure and life hazard (First revision) (IEC 62305-3: 2006, IDT)
Malaysian Standard
RACK 2
MS IEC
62305
2007
MS IEC 623054: 2007
Protection against lightning - Part 4: Electrical and electronic systems within structures (First revision) (IEC 62305-4: 2006, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610006-3: 2000
Electromagnetic compactability (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light - industrial environments (IEC 1000-6-3: 1996, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610006-4: 2000
Electromagnetic compactability (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments (IEC 1000-6-4: 1997, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2002
MS IEC 610004-24: 2002
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques Section 24: Test methods for protective devices for hemp conducted disturbance basic EMC publication (IEC 61000-4-24: 1997, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2002
MS IEC 610005-5: 2002
Electromagnetic compactability (EMC) - Part 5: Installation and mitigation guidelines Section 5: Specification of protective devices for HEMP conducted distrubance - basic EMC publication (IEC 61000-5-5: 1996, IDT)
Malaysian Standard
RACK 2
Page 70 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
61000
2000
MS IEC 610006-1: 2000
Electromagnetic compactability (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light industrial environments (IEC 61000-61: 1997, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2001
MS IEC 610006-2: 2001
Electromagnetic compactability (EMC) - Part 6: Generic standards - Section 2: Immunity for industrial environments (IEC 61000-6-2: 1999, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610006-3: 2000
Electromagnetic compactability (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light - industrial environments (IEC 61000-6-3: 1996, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610006-4: 2000
Electromagnetic compactability (EMC) - Part 6: Generic standards - Section 4: Emission standard for residential, commercial and light - industrial environments (IEC 61000-6-4: 1997, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610004-4: 2000
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/burst immunity test basic EMC publication (IEC 61000-4-4: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610004-5: 2001
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test (IEC 61000-4-5: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610004-6: 2000
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio frequency fields (IEC 61000-4-6: 1996, IDT)
Malaysian Standard
RACK 2
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 7: General guide on harmonics and interharmonics measurements and instrumentation for power supply systems and equipments connected thereto (IEC 61000-4-7: 1991, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610004-7: 2000
MS IEC
61000
2000
MS IEC 610004-8: 2000
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 8: Power frequency magnetic field immunity test basic EMC publication (IEC 61000-4-8: 1993, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2002
MS IEC 610004-9: 2002
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 9: Pulse magnetic filed immunity test basic EMC publication (IEC 61000-4-9: 1993, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610004-10: 2000
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 10: Damped oscillatory magnetic field immunity test basic EMC publication (IEC 61000-4-10: 1993, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610004-11: 2000
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 11: Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610004-12: 2000
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 12: Oscillatory waves immunity test - basic EMC publication (IEC 61000-412: 1995, IDT)
Malaysian Standard
RACK 2
Page 71 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
61000
2000
MS IEC 610004-16: 2000
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 16: Test for immunity to conducted, common mode distrurbances in the frequency range 0 Hz TO 150 kHz (IEC 61000-4-16: 1998, IDT)
Malaysian Standard
RACK 2
MS IEC
61000
2000
MS IEC 610004-16: 2001
Electromagnetic compactability (EMC) - Part 4: Testing and measurement techniques - Section 16: Test for immunity to conducted, common mode distrurbances in the frequency range 0 Hz TO 150 kHz (IEC 61000-4-16: 1998, IDT)
Malaysian Standard
RACK 2
MS IEC
61024
2001
MS IEC 610241: 2001
Protection of structures against lightning Part 1: General principles (IEC 61024-1: 1990, IDT)
Malaysian Standard
RACK 2
MS IEC
61024
2001
MS IEC 610241-1: 2001
Protection of structures against lightning Part 1: General principles - Section 1: Guide A - selection of protection levels for lightning protection systems (IEC 61024-1-1: 1993, IDT)
Malaysian Standard
RACK 2
MS IEC
61024
2001
MS IEC 610241-2: 2001
Protection of structures against lightning Part 1: General principles - Section 2: Guide B - Design, installation, maintenance and inspection of lightning protection systems (IEC 61024-1-2: 1998, IDT)
Malaysian Standard
RACK 2
MS IEC
61032
2002
MS IEC 61032: 2002
Protective of persons and equipment by enclosures - probes for verification (IEC 61032: 1997, IDT)
Malaysian Standard
RACK 2
MS IEC
61046
2001
MS IEC 61046: 2001
D.C or A.C. supplied electronic step down convertors for filament lamps - General and safety requirements (IEC 61046: 1993 and its amendment 1: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
61048
1999
MS IEC 61048: 1999
Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements (IEC 61048: 1991, IDT)
Malaysian Standard
RACK 2
MS IEC
61049
1999
MS IEC 61049: 1999
Capacitors for use in tubular fluorescent and other discharge lamp circuits Performance requirements (IEC 61049: 1991, IDT)
Malaysian Standard
RACK 2
MS IEC
61050
2001
MS IEC 61050: 2001
Transformers for tubular discharge lamps having a no load output voltage exceeding 1000 V (Generally called neon transformers) - General and safety requirements (IEC 61050: 1991 and its amendment 1: 1994, IDT)
Malaysian Standard
RACK 2
MS IEC
61167
1999
MS IEC 61167: 1999
Metal halide lamps (IEC 1167: 1992, IDT)
Malaysian Standard
RACK 2
MS IEC
61195
2001
MS IEC 61195: 2001
Double capped fluorescent lamps - safety specifications (IEC 61195: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
61199
2001
MS IEC 61199: 2001
Single capped fluorescent lamps - Safety specifications (IEC 61199: 1999, IDT)
Malaysian Standard
RACK 2
MS IEC
61662
2001
MS IEC 61662: 2001
Assessement of the risk of damage due to lightning (IEC 61662: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
61800
2002
MS IEC 618003: 2002
Adjustable speed eletrical power drive system - Part 3: EMC product standard including specific test methods (IEC 61800-3: 1996, IDT)
Malaysian Standard
RACK 2
Page 72 of 73
March 14, 2017
[MALAYSIAN STANDARD – IEM LIBRARY]
MS IEC
62040
2002
MS IEC 620402: 2002
Uninterruptible power system (UPS) Part 2: Electromagnetic compactability (EMC) requirements (IEC 62040-2: 1999, IDT)
Malaysian Standard
RACK 2
MS IEC
61126
2001
MS IEC 61126: 2001
Procedure for use in the preparation of maximum lamp outlines (IEC 61126: 1992 and its amendment 1: 1996, IDT)
Malaysian Standard
RACK 2
MS IEC
61547
2002
MS IEC 61547: 2002
Equipment for general lighting purposes - EMC immunity requirement (IEC 61547: 1995, IDT)
Malaysian Standard
RACK 2
MS IEC
61326
2002
MS IEC 613261: 2002
Electrical equipment for measurement, control and laboratory use - EMC requirement Part 1: General requirements (IEC 61326-1: 1997, its amendment 1: 1998 and amendment 2: 2000, IDT)
Malaysian Standard
RACK 2
MS IEC
62305
2007
MS IEC
62305
2007
MS IEC
62305
2007
MS IEC
62305
2007
MS ISO
14001
2015
MS IEC 62305-1: 2007 MS IEC 62305-2: 2007 MS IEC 62305-3: 2007 MS IEC 62305-4: 2007 MS ISO 14001: 2015
Protection against lighting - Part 1: General principles (First revision) (IEC 62305-1: 2006, IDT) Protection against lighting - Part 2: Risk management (First revision) (IEC 62305-2: 2006, IDT) Protection against lighting - Part 3: Physical damage to structures and life hazard (First revision) (IEC 62305-3: 2006, IDT) Protection against lighting - Part 4: Electrical and electronic systems within structures (First revision) (IEC 62305-4: 2006, IDT) Emvironmental management systems - Requirements with guidance for use (Second revision) (ISO 14001: 2015, IDT)
Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard Malaysian Standard
RACK 2 RACK 2 RACK 2 RACK 2 RACK 2
Page 73 of 73
View more...
Comments
