CV FOR STATIC EQUIPMENT DESIGN ENGINEER

Selvan.C.J, Contact No: +965-69954267 E-mail: [email protected]

CURRICULUM VITAE Personal Details NAME

Selvan. C.J

Gender

Male

Material Status

Married

Date of Birth

10/06/1983

Passport No.

G2395633

Nationality

Indian

Languages

Tamil, English

Current Monthly Salary: 6000 USD Formal Education (2001.2005) Bachelors of Engineering in Mechanical in Government Institute of Technology, Anna University, Chennai, India. (1998.2000) Government of Higher Secondary School, Tamil Nadu, India. (1989-1998)

Government of High School, Tamil Nadu, India.

Professional Review: 

Around 11 Years of Experience in Conceptual Studies, Basic Engineering, Front End Engineering Design (FEED), Design & Detailed Engineering of Static Equipments for Oil & Gas (Offshore & Onshore), LNG Import Facilities, Petro chemical, Refineries.



Design & Detailed Engineering, Greenfield as well as Brownfield Experience



Specialization in Thermal and mechanical design of heat exchangers like Shell & tube (API 660), Breech lock exchanger, Air cooled exchangers (API 661), Plate frame exchangers(API 662), Hairpin type exchangers(API 663) & Fired Heater (API 560) by using HTRI/HTFS.



Performing Strength calculations & Analysis for High pressure vessels, Columns, Reactor, 32 phase separator, Reforms(pressure retaining parts), Flare stacks, Shell & tube exchangers, Air coolers(Pressure retaining parts), Multitube exchangers, Double pipe exchangers, Breech lock exchanger, Hot oil furnace, catalyst reformers, Fired heaters, InDirect bath heaters, Heater Treater, De-Salter, Cone roof tank, dome roof tank, Double deck floating roof tank, double wall tank & filters by manual calculation and by using PVElite, Compress, E-Tank & Staad Pro.



Specialization in selection of heat exchangers for offshore and onshore oil&gas application. Preparation of Tube sheet layout and baffle cut diagram in process data sheet.



Thermal rating & mechanical design of all types e.g. Fixed tubesheet (AEM, BEM, NEN, AEL), Breech-lock exchanger, Floating Head type (AES, BES, AET, BET), U tube type (AEU, BEU), exchangers with longitudinal baffle (AFT-two pass shell), BHU (double split flow), BGU (split flow), Kettle type (AKU, BKU) shell & tube exchangers using HTRI exchanger Suite



Thermal rating and mechanical design of double pipe & multitube exchangers using Xjpe & Xhpe modules in HTRI



Preparing tube layouts & baffle sketches, Vibration analysis using TEMA Standards & Tubesheet thickness calculation (for fixed tube sheet & U-tube type exchanger)



Preparation of Mechanical design data sheet for Pressure vessels, Heat exchangers, And Storage tanks.



Preparation of Technical Specifications, MR, PR and TBE/TBA for Pressure Vessels, Heat exchangers & Storage tanks.



Feed, EPC, Design & detailed engineering of pressure vessel, heat exchangers, storage tanks for oil&gas(offshore, onshore) & refineries.



Material Selection low Temperature, cryogenic and elevated temperature service.



Design and detailed engineering of Horizontal double wall underground and above ground storage tank by UL-58 and UL-142



Design & Detailed Engineering of Pressure vessel with “U” Stamp Requirement



Design calculation and detailing of pressure vessel, heat exchangers & storage tanks by ASME, EN-133445, PD-5500, WRC-107/297, PED, Shell DEP, TEMA, API650, API 660, API 12K,API 620, NACE-MR0175(ISO 15156), UL-58 & UL-142



Performing Thermal Design Calculation By Using HTRI, HTFS & B-JAC for heat exchangers and API-2000 for tank emergency venting



Piping stress Analysis by using CAESAR-II



Structural design calculation by using STAAD PRO



Reviewing vendor’s Drawing/Documents and preparing Technical Queries



Preparation of piping stress and support calculation for skid piping and structural calculation for skid



Reviewing and Approval of Internals(Coalescer, demister, schoepentoeter, Tray,etc.,) Pressure vessel, column, Reactor & Tank Internals



Co-ordinate with Process/Project System/Civil/Instrumentation/Electrical in Finalizing



Conceptual Studies of ASME, API, TEMA, BS 5500, PED, EN13445, AD-Merkblatter, WRC 107,297 & client reference standard

to fulfill Client & code requirements (U, S-Stamp)

Field of Experience: Mechanical Design & Detailing of Pressure Vessel (ASME SEC VIII Div1,2),Tanks(API 650,620), Heat Exchanger thermal design (TEMA, ASME,API 660), with Software like PV-Elite, Compress, Tank 3.3, HTRI, Codecalc, CAESAR-II, . EXPERIENCE DETAILS: Current Company: Kuwait National Petroleum Company, Kuwait(KNPC) Project: Refinery plant engineering at Mina Al-Ahmadi Position: Mechanical Design Engineer - Static Equipments 4 May 2015 - Till Date

Preparing FEED documents, Site survey & feasibility study report for static equipments for refinery modernization project and future up-gradation project, Preparation of mechanical data sheet, specification & technical tender documents for static equipments, Which includes,

 Failure analysis of a wide range of static equipment, resolution of repetitive or chronic reliability problems  Failure analysis heat exchanger due to deposition and inadequacy of wash water for refinery and LNG Import facilities  Design & detailing of cryogenic vessels & tanks.  Prepare design basis for static equipment for new expansion project  Implementation of project requirement from operation and maintenance department.  Analyzing all critical equipment for frequent failures and recommending corrective measures

 Up gradation of exchanger metallurgy based on RCA recommendation  Thermal rating of heat exchangers in HTRI.  Preparing purchase specification & technical tender specifications for static equipments

 Technical Bid Evaluation of vendor offer, review and approval of vendor documents/ drawings

 Participates in HAZOP, Tier 2 Risk Assessment Studies  Participates in capital budget proposals related to the Engineering Development Section, including budgetary quotations, approvals and endorsements.

 Up gradation of equipment materials for bad actors, especially for heat exchangers  Resolving site related problem with process, operation & maintenance team  Review of vendor document/drawing for flare stack, fired heaters, shell & tube exchangers, Breech lock exchangers, Air-Cooled exchangers, pressure vessel, columns, reactors, floating roof tank & dome roof tank.

 Utilization of MAXIMO System  Review and approval on contract trend request and deviation request for major projects

 Piping stress analysis by using CAESAR-II  Structural calculation by manual as well as by using STAAD Pro

Company: CB&I India Pvt. Ltd., India Project: EPC-Dong Energy Crude stabilization (Denmark), Yanbu petrochemical (Ehtylene oxide & ethylene glycol plant) KSA, FEED-Port Bonython(Australia),EPC of KNPC CFP 2020(MAB1,Kuwait) & Detailed Engineering-KEMYA (KSA) Position: Sr. Mechanical Engineer - Static Equipment 10 June 2013 - Till Date 

Thermal rating of heat exchangers in HTRI. Condensers, Two phase exchangers, Kettle Reboilers from licensor’s process datasheets. Prepared thermal datasheets for yanbu ethylene glycol. Preparing tube layouts & baffle sketches in thermal data sheet. Thermal & mechanical design of reformers & hot oil furnace (API 560 Heater).



Review of vendor calculation & drawings for pressure vessel(Microprotol calculation), heat exchangers, filter separator & columns for Dong Energy



Thermal design of heat exchangers Shell & tube(AES,BES,AEL,BEM,AEU,BEU) (API 660), Air cooled exchangers (API 661), Plate frame exchangers(API 662), Hairpin type exchangers(Double pipe & multi tube)(API 663), by using HTRI for KNPC and Dong Energy



Preparation of mechanical data sheets for pressure vessel, columns, reactor and heat exchangers for crude stabilization unit, MAB1 Refinery & Kemya refinery.



Detailed Engineering pressure vessel & heat exchanger for Dong, KNPC & KEMYA Refineries



Design & detailing of LNG Storage tanks.



Preparation of RFQ, TBA/TBE of pressure vessel, columns, reactors, Air coolers & heat exchangers for MAA/MAB Unit for KNPC Proposal



Technical interaction with vendor, other disciplines and lead office



Leading the team of mechanical for project/proposal/feed engineering



Mechanical Design & Analysis of Pressure vessel, Heat Exchanger by respective software tool Compress, PV-Elite and by respective code ASME, EN-13445 & TEMA & Shell DEP.

Company: BS&B Technologies Ltd., India Project: Oil & Gas EPC Projects for CPPE, Athabasca oil sand Corporation, Gas Plant-BP Alaska, oil&gas processing unit for Polaris Engineering, Excelsior and Equinox Engineering (USA & Canada) for OFFSHORE and Onshore projects Position: SR. Design Engineer- Static Equipment 14 Nov 2011 – 7 June 2013 

Design & Detailed Engineering of Skid mounted equipment like, Heater Treater, 3 Phase Separator, 2 phase Separator, Indirect bath heater, FWKO, Glycol de hydration unit, Amine package for Oil & Gas Projects with “U” Stamp Requirement for Pressure vessel & heat exchangers



Thermal design of heat exchangers like Shell & tube (AES,BES,AEL,BEM,AEU,BEU) (API 660), Air cooled exchangers (API 661), Plate frame exchangers(API 662), Hairpin type exchangers(Double pipe & multi tube) (API 663), by using HTRI for BP Alaska Gas processing unit in USA.



Piping stress calculation, Pipe support calculation for skid piping



Structural Strength calculation for skid beams in Staad Pro



Preparation of Technical Offer, Mechanical Data Sheet for pressure vessel & Heat exchangers for proposal Engineering



Design and detailed engineering of Pig Launcher/Receiver and test separator for OFFSHORE Platforms



Piping calculation as per ASME 31.3 & Piping material selection based on service & as per piping class



Preparation of valve list, line list for skid piping.



Review of ISO Drawings and Review of 3D Model in Cadworx



Technical clarification with client & vendors & participating weekly project meeting



Design & Detailed Engineering of Pressure vessel, Piping, Skid & Heat Exchanger, As per ASME&API Standards with “U” Stamp for Pressure vessel



Preparation & Review of Design calculation, GA Drawing & Fabrication drawing for static equipment



Thermal & Mechanical Design of Heat Exchanger by HTRI ,Compress, TEMA & ASME UHX,



Preparing Thermal design calculation & mechanical strength calculation for heat exchangers

Company: Nauvata Engineering Pvt. Ltd., India Project: Hengam (IOOC)-Iran, Cluster-7, 16(India) & B-193(India) OFFSHORE Oil & Gas Projects Position: Sr. Design Engineer- Static Equipment 11 May 2011 – 04 Nov 2011 

Thermal design of heat exchangers like Shell & tube (AES,BES,AEL,BEM,AEU,BEU) (API 660), Air cooled exchangers (API 661), Plate frame exchangers(API 662), Hairpin type exchangers(Double pipe & multi tube) (API 663)



Conceptual study of bid documents & preparation for list of equipment’s.



Review of vendor calculation and drawings for Pig Launcher/receiver, test separator packages, well fluid coolers, 1st stage and 2nd stage separators and Glycol Dehydration unit for OFFSHORE process Platform



Thermal design of heat exchangers like Shell & tube (API 660), Air cooled exchangers (API 661), Plate frame exchangers (API 662), Hairpin type exchangers(API 663), by using HTRI for B-193 process platform Unit.



Preparation of RFQ & Mechanical Data Sheet for static equipment



Technical clarification with client & vendors & participating weekly project meeting



Design & Detailed Engineering of Pressure vessel, Heat Exchanger, Storage Tank As per ASME&API Standards with “U” Stamp for Pressure vessel Preparation & Review of Design calculation, GA Drawing & Fabrication drawing for static equipment



Design of Pressure Vessel by PV-ELITE2011, Storage Tanks by TANK 3.3,



Design & Analysis of Heat Exchanger by HTRI ,PV-ELITE,TEMA & ASME UHX,



Preparing Thermal design calculation & mechanical strength calculation for heat exchangers

Company : Doha Petroleum (DOPET, Qatar) Project: EPC projects with Qatar petroleum (NDIA, PS-4,Hulul) OXY, ORYX-GTL(LPG Hydro generator) & TOTAL (Offshore & onshore)Oil & Gas processing facilities. Position: Sr. Design Engineer- Static Equipment 09 April 2010- 06 May 2011 

Design and detailed engineering of Pressure vessel, Heat Exchanger, Storage Tank As per ASME,TEMA&API Standards with “U” Stamp for Pressure vessel & “S” Stamp for Boilers



Design and detailed engineering of wax storage tank, sulfur storage tanks, LPG Hydro generation package, cooling water tank, strainers, Flare KO Drum at onshore and Pig Launchers/Receiver, test separator packages, closed drain system for OFFSHORE Platforms



Thermal design of heat exchangers like Shell & tube (AES,BES,AEL,BEM,AEU,BEU) (API 660), Air cooled exchangers (API 661), Plate frame exchangers(API 662), Hairpin type exchangers(Double pipe & multi tube) (API 663), by using HTRI for ORYX GTL Hydro generation package



Design of Pressure Vessel and heat exchangers by compress, Storage Tanks by TANK 3.2,



Design & detailing of liquid nitrogen storage tank



Design & Analysis of Heat Exchanger by HTRI ,PV-ELITE,TEMA & ASME UHX,



Preparing Thermal design calculation by using HTRI



Preparing Data sheet, specifications ,TBE & communication with client



Review & approve Vendor Documents & technical queries

 Company

:

Stress analysis as per ASME code calc 2010. Procyon System Private Ltd , India

Project: Saudi kayan petrochemical complex @ saudi, Repsol gas processing facilities @ canada, Crude processing facilities for Excelsior engineering Projects @ canada Job Position: Design Engineer-Static Equipment 10 April 2009— 05 April 2010 

Thermal design of heat exchangers like Shell & tube (AES,BES,AEL,BEM,AEU,BEU) (API 660) for repsol gas processing plant



Design & Detailed Engineering of pressure vessel, Heat exchanger’s and Storage Tanks, column & Reactor As per ASME, TEMA, API 660 & API 650 codes for Saudi kayan petrochemical complex



Design & detailed Engineering of stripper column, HTF Expansion vessel, Underground diesel storage tank



Design& Detailing of Heat Exchanger for rich glycol exchangers, Glycol Re-boiler, Product cooler & stripper cooler for repsol gas processing



2-Phase, 3- Phase Separators, NAPTHA storage tank, raw water, De-Mineralized, fire water storage tank by API 650 for crude processing facilities.

Company: HYUNDAI ENGINEERING & CONSTRUCTION (HDEC) Project: SAUDI ARAMCO Oil&Gas Processing Plant, Saudi Arabia. Job Position: Tank Design Engineer 22 SEP 2007—25 MAR 2009 

Design & detailing of Crude Oil Storage Tanks (92m Dia, Double Deck Floating Roof),NGL (sphere) Storage Tanks.



Design & detailing of Pressure vessels, Storage Tanks & Heat Exchangers by ASME SEC VIII DIV-1,API-650 & PV-Elite, HTRI



Design & detailing of double deck floating roof, cone roof tank, dome roof tank & Sphere tank



Design of Heat Exchanger for Glycol Dehydration Unit, Gas sweetening unit.



Review vendor document & technical queries for columns, storage tanks & heat exchangers



Design & detailing of liquid nitrogen storage tanks



Liaison with project management & with Client.



Review vendor documents for storage tanks, columns & heat exchangers



Preparation of mechanical Data Sheet for storage tanks, columns & heat exchangers, Specification for columns & storage tanks as per code & Saudi Aramco Standard.

Company: A1 Engineers & Designers Project: Crude stabilization for PDO refinery through CC Energy Development, Yunnan Crude preheat and vacuum residue trains @ china Job Position: Mechanical Design Engineer 10 May 2005—22 Sep 2007 

Design & Detailed Engineering of Storage Tanks, Heat Exchangers & Pressure vessel by API, ASME & TEMA Codes & Standards.



Preparation of strength calculation as per ASME, API Standards.



Design and detailed engineering of HP, LP Separator for crude stabilization unit



Design and detailing of shell & tube heat exchangers as per ASME, TEMA Standard



Preparing Mechanical Strength calculation for Pressure vessel, Heat exchanger & Storage Tanks by PV-Elite & Tank Software



Column & Reactor design with Internals like trays, catalysts bed & Mist eliminator



Preparation of Mechanical data sheet & specification as Per ASME, TEMA, API & client Standards.

Software Skill: 

Basic Computer Knowledge(MS Office),



AutoCAD ,PDMS,PV-Elite, Compress, Tank, HTRI & Aspen one

AREAS OF INTEREST:    Extra Curricular Activities:

Design of Oil & Gas, Power Plant & Petrochemical Design of Nuclear Power Plant & components Research & Development of New energy Paper presentation 

Hydrogen as a IC engine fuel presented for National Seminar held at Arulmigu Kalasalingam College of Engineering, Krishnankoil.



Recent trends in Machine Design held at Thanthai Periyar Govt. Institute of Technology, Vellore.

Strengths: 

Excellent interpersonal and team skills.



Well organized and proficient with detail.



Excellent trouble shooting and analytical skill.



Analyzing any concept of new idea.



Excellent Team Leader.. - Excellent references are available upon request.

Declaration: 

I hereby declare that all statements made in this application are true, complete and correct to the best of my knowledge and belief.



I have read the provisions in the rules and notice of the organizations carefully and I hereby undertake to abide by them.

I further declare that I fulfill all the

conditions of eligibility regarding are limits, educational qualifications etc. Date : Place: Chennai

Signature of the candidate