CTU202 ACTE - Ch 02b - BJ CT Tools Catalog

BJ Coiled Tubing Tools Catalog

 January 10, 2002 Orders may be placed through: Coiled Tubing Tool Production BJ Services 6620 – 36 Street S.E. Calgary, Alberta, Canada T2C 2G4 FAX: (403) 215-1361 Telephone: (403) 531-6750 Contact Name: John Ferguson, P.Eng. Email address: [email protected]

To ensure you have the latest version of this manual, compare the date on this page with the date on the on-line version of this manual. The on-line manual is located in Lotus NOTES on your nearest Lotus NOTES server under the TIE folder. The database title is: Coiled Tubing Documents. Alternatively, contact Coiled Tubing Tool Production.

This publication is the property of BJ Services and may not be reproduced or translated, without the prior written consent from the BJ Services, Technical Publication Department, Calgary, Alberta, Canada. F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. January 10, 2002 BJ Coiled Tubing Tools Catalog

Table of Contents (See Price List Table of Contents Also) MATERIAL ................................................................................................................................................................ 3 THREADS ................................................................................................................................................................... 3 STANDARD TOOLS.................................................................................................................................................. 5 Surface Tubing Connector ................................................................................................................................... 7 Downhole Filter Sub ............................................................................................................................................ 9 Surface Filter Screen.......................................................................................................................................... 11 Tubing Grapple Connector ................................................................................................................................ 13 BDK Dimpleon Connector ................................................................................................................................. 15 Tubing Roll-on Connector.................................................................................................................................. 19 Sequence Valve................................................................................................................................................... 23 Double Dart Check Valve .................................................................................................................................. 25 BDK Double Dart Check Valve.......................................................................................................................... 27 Double Flapper Check Valve ............................................................................................................................. 29 Double Flapper Check Valve with BDK Cartridge............................................................................................ 31 Vortex Nozzle ..................................................................................................................................................... 33 Cleanout Nozzle ................................................................................................................................................. 35 Bakke Release Tool & Fishing Spear................................................................................................................. 37 Kick-off Tool....................................................................................................................................................... 39 Centralizer.......................................................................................................................................................... 41 Dual Circulation Sub ......................................................................................................................................... 43 Straight Bar........................................................................................................................................................ 45 Rod Clamp.......................................................................................................................................................... 47 Snake Grapple Connector .................................................................................................................................. 49 Crossover Sub .................................................................................................................................................... 51 Precision Displacement Dart ............................................................................................................................. 53 Shearable Center Displacement Plug ................................................................................................................ 57 Plug Catcher Sub ............................................................................................................................................... 59 SPECIALIZED TOOLS........................................................................................................................................... 61 Roto-Jet .............................................................................................................................................................. 63 Roto-Jet - Options .............................................................................................................................................. 65 Tornado .............................................................................................................................................................. 67 Downhole Phase Separator................................................................................................................................ 69 Well-Vac............................................................................................................................................................. 71 Concentric Tubing Surface Connector............................................................................................................... 73 Lateral Entry Guidance System.......................................................................................................................... 75 Straddle Packer .................................................................................................................................................. 77 Universal Connect / Disconnect (UCD)............................................................................................................. 79 Bakke Motor-head .............................................................................................................................................. 81 Parabow ............................................................................................................................................................. 83 WIRELINE TOOLS ................................................................................................................................................. 85 Stiff Wireline Connector..................................................................................................................................... 87 Snap Latch.......................................................................................................................................................... 89 Tension Release Tool ......................................................................................................................................... 91 Bakke Flow Release Cable Head ....................................................................................................................... 93 Contact Sub ........................................................................................................................................................ 95 BJ Wireline Pressure Bulkhead.......................................................................................................................... 97 Bakke Wireline Pressure Bulkhead .................................................................................................................... 99 F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 1

DRILLING TOOLS................................................................................................................................................ 101 Bottom Hole Assembly ..................................................................................................................................... 103 Boss Anchor ..................................................................................................................................................... 105 Steering Tool .................................................................................................................................................... 107 Orientation Tool............................................................................................................................................... 109 Downhole Pressure/Temperature Memory Unit .............................................................................................. 111 WELL CONSTRUCTION EQUIPMENT............................................................................................................ 113 Side Entry Sub .................................................................................................................................................. 115 INDEX...................................................................................................................................................................... 119

(See Price List Index also)

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page ii January 10, 2002 BJ Coiled Tubing Tools Catalog

Material All tools in this catalog are rated for H2S service and are compatible with BJ Services acid inhibitors unless otherwise noted.

Threads The standard threads used on tool joints are listed below. These threads have been selected because they are easily cut in most areas of the world and do not require a large make-up torque associated with tapered v-form threads. Other threads can be special ordered.

Tool O.D. (inch)

Thread

0.75" 1 1.25 1.5 1.687 1.75 1.75 (optional) 7/8" I.D. 2 2.125 2.375 2.875 3.125

5/8" UNF 0.75" x 16 UNF 1" x 12 UNF 1.125" x 10SA 1.125" x 10SA 1.125" x 10SA 1.375 x 10SA 1.563 x 8SA 1.70" x 10SA 2.08" x 10 SA 2.125" x 8 SA 2.50" x 5 Acme

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 3

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 4 December 17 2001 BJ Coiled Tubing Tools Catalog

Standard Tools

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 5

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 6 December 17 2001 BJ Coiled Tubing Tools Catalog

Surface Tubing Connector The Surface Tubing Connector provides a reliable connection between the coiled tubing and surface equipment inside the reel. It creates a joint which is stronger than the coiled tubing itself. The Surface Tubing Connector comes with a 2” Fig. 1502 WECO union connection. It is not recommended that this be used as a general purpose connector to coiled tubing.

Tubing O.D

O.D.

I.D.

Length SAP No. JDE No.

1-1/4" 4.125" 1.030" 6.77" 11233 1-1/2" 4.00" 1.28" 7.280" 11234 1 3/4" 4.00" 1.53" 7.280" 23477 2" 9802 Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 7

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 8 December 17 2001 BJ Coiled Tubing Tools Catalog

Downhole Filter Sub The Downhole Filter Sub is attached above various downhole tools such as the Roto-Jet and Vortex Nozzle tools to prevent clogging and wear on the tool. The standard Downhole Filter Sub is a wire wound filter. For the Roto-Jet tool, a magnetic trap is also required to collect particles that could plug or damage the magnets in the speed governor. The gap size on these filters is 0.010”. Other filter subs are available upon request.

Type

Working Tensile Micron SAP O.D. Length Pressure Rating Rating No.

Standard 1-3/4" 28.6" 5,000 psi Magnetic 1-3/4" 28.5" 5,000 psi Standard 2-1/8" 36.2" 5,000 psi Magnetic - Short 2-1/8" 24.22" 5,000 psi Magnetic - Long 2-1/8" 36.2" 5,000 psi Magnetic 2-7/8" 28.9" 5,000 psi Replacement Screen 1-3/4" Replacement Screen 2-1/8" Replacement Screen 2-1/8" Replacement Screen 2-7/8" Source: BJ Services - Tool Production

25,000 lb 25,000 lb 20,000 lb 20,000 lb 20,000 lb 60,000 lb

254u 254u 254u 254u 254u 254u

JDE No.

22035 850935 22113 22037 76994 22523 22525 22387 12783 12900 12905 22277

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 9

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 10 December 17 2001 BJ Coiled Tubing Tools Catalog

Surface Filter Screen The Surface Filter Screen is a wire wound design which mounts in a specially designed WECO 1502 crossover and slides into a standard joint of treating iron. The filter connects to the Inline Surface Filter Plug which is inserted into the Surface Treating iron. The surface filter must have a smaller wire gap than the downhole filter to minimize the risk of plugging the downhole filter. The filter is provided but not the filter housing.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 11

Description

Gap Micron SAP Size O.D. Length Rating No.

.007" Jetting .028" General .028" Short General .110" Cement Standard Filter Plug for 2" iron Small Filter Plug for 1-3/4" iron Source: BJ Services - Tool Production

1.687" 60"

177 u

1.687" 86"

635 u

1.687" 40"

635 u

1.687" 86"

2500 u

JDE No.

11105 11106 73011 25049 11107 12890 12840

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 12 December 17 2001 BJ Coiled Tubing Tools Catalog

Tubing Grapple Connector The Tubing Grapple Connector connects bottom hole assemblies to the coiled tubing with a superior gripping action. The design has been proven in heavy-duty applications such as drilling, milling and fishing. The Tubing Grapple Connector has been optimised for torque and tensile loads. Set screws are not used to carry the torsional loads in this design. The principle of the connector is that the grapple has fine thread profile on the inside diameter which is forced into the tubing wall by a larger pitch thread on the outside diameter. The Tubing Grapple Connector provides a high tensile and torsional strength connection onto the tubing. In order to attach the grapple to the tubing there is a specific procedure to ensure that good, consistent performance is achieved. Grapples must be checked to ensure that the internal thread profile and slot edges are sharp, sometimes referred to as "wickers", prior to fitting.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 13

Tubing Size 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-3/4" 1-3/4" 1-3/4" 2" 2" 2" 2-3/8" 2-3/8" 2-3/8" 2-7/8" 2-7/8"

Part Connector Slip Connector Connector Slip Service Kit Connector Slip Service Kit Connector Connector Slip Connector Slip Connector Connector Slip

I.D.

O.D. Length

Thread

Max. Working Pressure

1.0"

2-1/8" 14.75"

1.70-10SA

5,000 psi

1.0"

2-3/8" 14.75"

1.70-10SA 1.825-8SA

5,000 psi

1.13"

2 5/8" 14.75"

2 1/8"-8SA

5,000 psi

1.13"

3-1/8" 17.25"

2.50-5 Acme 5,000 psi 2.65-8SA

1.5"

3 3/8" 17.25"

2.65-8SA

1.125" 3-3/8" 17.25" 2.5" 3-3/4" 17.25"

2-7/8" Source: BJ Services - Tool Production

5,000 psi

2.50-5 Acme 5,000 psi 2.65-8SA 5,000 psi 2.5-5A

SAP No.

JDE No.

9457 9454 9463 601169 9460 23211 22501 76523 22495 23533 76524 9473 9475 9467 9450 9441 9449 9482 9479 9523

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 14 December 17 2001 BJ Coiled Tubing Tools Catalog

BDK Dimpleon Connector The BDK Dimple Connector offers a fast, efficient and safe means of connecting the coiled tubing connector to the tubing. The BDK Hydraulic Yoke and Jig are essential tools for making up the BDK Dimple Connectors. The Hydraulic Yoke can be operated via a hydraulic hand pump or control panel. The Jig is designed to suit all wall thicknesses of that particular tubing size. Once the connection has been made it has the same tensile and torque capability as the tubing. This third-party tool is: • Best in class • Bulk purchased for lowest cost • Delivered immediately from Tool Production inventory • Entered into the quality control system upon entry into Tool Production inventory.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 15

Description

SAP No. JDE No.

1-1/4" Dimpleon Connector 0.095"W x 1.5"OD

27197

1-1/4" Dimpleon Connector 0.102"W x 1.5"OD

23385

1-1/4" Dimpleon Connector 0.109"W x 1.5"OD

23421

1-1/4" Dimpleon Connector 0.118"W x 1.5"OD

23387

1-1/4" Dimpleon Connector 0.125"W x 1.5"OD 1-1/4" Dimpleon Connector 0.145"W x 1.7"OD 1-1/2" Dimpleon Connector 0.095"W x 1.5"OD 1-1/2" Dimpleon Connector 0.102"W x 1.5"OD 1-1/2" Dimpleon Connector 0.109"W x 1.5"OD 1-1/2" Dimpleon Connector 0.109"W x 1.5"OD 1-1/2" Dimpleon Connector 0.118"W x 1.5"OD 1-1/2" Dimpleon Connector 0.125"W x 1.5"OD 1-1/2" Dimpleon Connector 0.125"W x 1.75" OD 1-1/2" Dimpleon Connector 0.125"W x 1.5"OD 1-1/2" Dimpleon Connector 0.125"W x 1.5"OD 1-1/2" Dimpleon Connector 0.134"W x 1.5"OD 1-1/2" Dimpleon Connector 0.145"W x 1.5"OD 1-1/2" Dimpleon Connector 0.156"W x 1.5"OD 1-1/2" Dimpleon Connector 0.175"W x 1.5"OD 1-3/4" Dimpleon Connector 0.190"W x 1.125"OD 1-3/4" Dimpleon Connector 0.109"W x 1.75"OD 1-3/4" Dimpleon Connector 0.118"W x 1.75"OD 1-3/4" Dimpleon Connector 0.125"W x 1.75"OD 1-3/4" Dimpleon Connector 0.134"W x 1.75"OD 1-3/4" Dimpleon Connector 0.125"W x 2.125"OD 1-3/4" Dimpleon Connector 0.134"W x 2.125"OD 1-3/4" Dimpleon Connector 0.156"W x 1.75"OD 2" Dimpleon Connector 0.134"W x 2.125"OD 2" Dimpleon Connector 0.156"W x 2.125"OD 2" Dimpleon Connector 0.203"W x 1-1/4" CS Hydril 2-7/8" Dimpleon Connector 0.190"W x 2.875"OD x 2.5-5 2-7/8" Dimpleon Connector 0.190"W x 2.875"OD x 2.658"SA 2-7/8" Dimpleon Connector 0.203"W x 2.875"OD 2-7/8" Dimpleon Connector 0.203"W x 2.875"OD 1-1/2" Dimpleon Reelable Connector 0.125"W - 0.109"W 1-1/2" Dimpleon Reelable Connector 0.125"W - 0.125"W 1-1/2" Dimpleon Reelable Connector 0.125"W - 0.134"W 1-1/2" Dimpleon Reelable Connector 0.109"W - 0.109"W 1 3/4" Dimpleon Reelable Connector 0.134"W - 0.134"W 2" Dimpleon Reelable Connector 0.134"W - 0.134"W 2" Dimpleon Reelable Connector 0.203"W - 0.203"W 1-1/4" Dimpleon Jig Bushing

23423 9543 28655 28657 23197 23905 28825 22763 22761 22767 22765 23459 25091 28663 25021 9531 27217 23737 23795 28675 23793 600355 23461 9636 23215 23749 9571 22975 23541 23055 22773 22769 22771 25357 28647 28523 28651 22781

854761

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 16 December 17 2001 BJ Coiled Tubing Tools Catalog

Description 1-1/2" Dimpleon Jig Bushing 1-3/4" Dimpleon Jig Bushing 2" Dimpleon Jig Bushing 2-7/8" Dimpleon Jig Bushing 1-1/4" - 2-3/8" Hydraulic Dimpleon Yoke 2-7/8" - 3-1/2" Hydraulic Dimpleon Yoke Hydraulic Hand Pump Thread Chaser 1.70"-10SA Box/Pin Thread Chaser 1-1/8"-10SA Box/Pin 1-1/4" Reamer Cutter 0.095"W 1-1/4" Reamer Cutter 0.102"W 1-1/4" Reamer Cutter 0.109"W 1-1/4" Reamer Cutter 0.118"W 1-1/4" Reamer Cutter 0.125"W 1-1/4" Reamer Cutter 0.134"W 1-1/2" Reamer Cutter 0.095"W 1-1/2" Reamer Cutter 0.102"W 1-1/2" Reamer Cutter 0.109"W 1-1/2" Reamer Cutter 0.125"W 1-1/2" Reamer Cutter 0.118"W 1-1/2" Reamer Cutter 0.134"W 1-1/2" Reamer Cutter 0.145"W 1-1/2" Reamer Cutter 0.156"W 1-1/2" Reamer Cutter 0.175"W 1-3/4" Reamer Cutter 0.109"W 1-3/4" Reamer Cutter 0.118"W 1-3/4" Reamer Cutter 0.125"W 1 3/4" Reamer Cutter 0.134"W 1-3/4" Reamer Cutter 0.156"W 1-3/4" Reamer Cutter 0.190"W 2" Reamer Cutter 0.156"W 2" Reamer Cutter 0.203"W 2-7/8" Reamer Cutter 0.190W 2-7/8" Reamer Cutter 0.203W 2-7/8" Reamer Cutter 0.203W - Rough 2-7/8" Reamer Cutter 0.203W - Stepped 1-1/4" Bevel Deburr Cutter 1-1/2" - 2-3/8" Bevel Deburr Cutter 2-7/8" - 3-1/2" Bevel Deburr Cutter 1-1/2" Internal Reamer Tubing Bushing 1-3/4" Internal Reamer Tubing Bushing 2" Internal Reamer Tubing Bushing 2-7/8" Internal Reamer Tubing Bushing 1-1/4" Internal Combination Reamer System

SAP No. JDE No. 23163 22783 23213 23239 23161 23237 23443 23791 22785 27215 23425 23203 23427 23205 23869 28659 28661 22779 22777 28827 22775 26405 28665 25019 27219 23739 23797 28649 23463 9532 23225 23751 22973 23057 23061 23059 23465 23159 23063 23469 23471 23223 23235 23467

854332 854757

854333 854334 853162 853163

854335

854758

854336 854337 854759

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 17

Description 1-1/2" - 2-3/8" Internal Combination Reamer System 2-7/8" - 3-1/2" Internal Combination Reamer System Source: BJ Services - Tool Production

SAP No. JDE No. 23157 23233

854760

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 18 December 17 2001 BJ Coiled Tubing Tools Catalog

Tubing Roll-on Connector Roll-on connectors attach tools to the bottom of the coiled tubing string. It is important to use the correct roll-on fitting for the wall thickness and size of tubing. The appropriate roller wheel must be used to apply the roll-on fitting.

(a)

The two styles of roll-on fitting are: (a) with a roll-on connection on one end and a thread connection on the other end. (b) with a roll-on connection on both ends (used to spool the tubing onto the reel in an emergency) Pressure rated the same as the rating of the coiled tubing. Tensile and torque rating is 80% of the coiled tubing. Tubing circularizers are available. Picture (a) Specify the tubing size, wall thickness and thread requirements for the one end.

(b) Picture (b)

Description

SAP No.

JDE No.

3/4" x 0.080" Wall x 5/8" UNF 1" x 0.087" Wall x 1"-12UNF 1" x 0.095" Wall x 1-1/8"-10SA 1" x 0.095" Wall x 1"-12UNF 1-1/4" x 0.087" Wall x 1"-12UNF 1-1/4" x 0.095" Wall x 1"-12UNF 1-1/4" x 0.102" Wall x 1"-12UNF 1-1/4" x 0.109" Wall x 1"-12UNF 1-1/4" x 0.116" Wall x 1"-12UNF 1-1/4" x 0.125" Wall x 1"-12UNF 1-1/4" x 0.134" Wall x 1"-12UNF 1-1/4" x 0.087" Wall x 1-1/8"-10SA 1-1/4" x 0.095" Wall x 1-1/8"-10SA 1-1/4" x 0.102" Wall x 1-1/8"-10SA 1-1/4" x 0.109" Wall x 1-1/8"-10SA 1-1/4" x 0.116" Wall x 1-1/8"-10SA 1-1/4" x 0.125" Wall x 1-1/8"-10SA 1-1/4" x 0.134" Wall x 1-1/8"-10SA 1-1/2" x 0.095" Wall x 1-1/8"-10SA

25067 23867 23613 23723 9744 23545 9745 9753 25011 23873 23871 9703 9720 9747 9704 25073 25071 23925 9701

852152

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 19

Description

SAP No.

1-1/2" x 0.102" Wall x 1-1/8"-10SA 1-1/2" x 0.109" Wall x 1-1/8"-10SA 1-1/2" x 0.116" Wall x 1-1/8"-10SA 1-1/2" x 0.125" Wall x 1-1/8"-10SA 1-1/2" x 0.134" Wall x 1-1/8"-10SA 1-1/2" x 0.145" Wall x 1-1/8"-10SA 1-1/2" x 0.156" Wall x 1-1/8"-10SA 1-1/2" x 0.175" Wall x 1-1/8"-10SA 1-3/4" x 0.095" Wall x 1-1/8"-10SA 1-3/4" x 0.102" Wall x 1-1/8"-10SA 1-3/4" x 0.109" Wall x 1-1/8"-10SA 1-3/4" x 0.118" Wall x 1-1/8"-10SA 1-3/4" x 0.125" Wall x 1-1/8"-10SA 1-3/4" x 0.134" Wall x 1-1/8"-10SA 1-3/4" x 0.156" Wall x 1-1/8"-10SA 2" x 0.109" Wall x 1.70"-10SA 2" x 0.125" Wall x 1.70"-10SA 2" x 0.134" Wall x 1.70"-10SA 2" x 0.156" Wall x 1.70"-10SA 2" x 0.175" Wall x 1.70"-10SA 2" x 0.190" Wall x 1.70"-10SA

12946 9702 12125 9729 12126 23229 23227 12943 TBA TBA 23149 23435 23127 23525 23523 12940 TBA 9754 9740 9741 12879

2-3/8" x 0.109" Wall x 2.08"-10SA

TBA

2-3/8" x 0.134" Wall x 2.08"-10SA

9715

2-3/8" x 0.156" Wall x 2.08"-10SA

9716

2-3/8" x 0.175" Wall x 2.08"-10SA

TBA

2-3/8" x 0.190" Wall x 2.08"-10SA

9721

2-7/8" x 0.134" Wall x 2-1/8"-8SA

TBA

JDE No. 854022

851114

853151

Tubing Roll-on to Roll-on Connector Description

SAP No.

1" x 0.087" Wall x 0.087" Wall 1" x 0.087" Wall x 0.095" Wall 1" x 0.095" Wall x 0.095" Wall 1-1/4" x 0.087" Wall x 0.087" Wall 1-1/4" x 0.087" Wall x 0.109" Wall 1-1/4" x 0.095" Wall x 0.095" Wall 1-1/4" x 0.102" Wall x 0.102" Wall 1-1/4" x 0.109" Wall x 0.109" Wall 1-1/2" x 0.102" Wall x 0.102" Wall 1-1/2" x 0.087" Wall x 0.087" Wall 1-1/2" x 0.095" Wall x 0.095" Wall

28531 28527 28529 9725 9726 9724 28525 9727 28735 27179 25217

JDE No.

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 20 December 17 2001 BJ Coiled Tubing Tools Catalog

Description

SAP No.

1-1/2" x 0.095" Wall x 0.109" Wall 1-1/2" x 0.102" Wall x 0.102" Wall 1-1/2" x 0.116" Wall x 0.116" Wall 1-1/2" x 0.125" Wall x 0.125" Wall 1-1/2" x 0.134" Wall x 0.134" Wall 1-1/2" x 0.145" Wall x 0.145" Wall 1-1/2" x 0.156" Wall x 0.156" Wall 1-3/4" x 0.109" Wall x 0.109" Wall 1-3/4" x 0.116" Wall x 0.116" Wall 1-3/4" x 0.125" Wall x 0.125" Wall 1-3/4" x 0.134" Wall x 0.134" Wall 1-3/4" x 0.145" Wall x 0.145" Wall 1-3/4" x 0.156" Wall x 0.156" Wall 1-3/4" x 0.175" Wall x 0.175" Wall 1-3/4" x 0.190" Wall x 0.190" Wall 1-3/4" x 0.204" Wall x 0.204" Wall 2" x 0.125" Wall x 0.156" Wall 2" x 2" x 0.156 Wall x 0.156 Wall 2-3/8" x 0.175" Wall x 0.190" Wall

9743 28735 28797 28799 28801 28803 28805 25077 28807 28809 28811 28813 28815 28817 28819 28821 23787 9712 25225

JDE No.

85115

Tubing Roll-on Connector Crimp Wheel Description

SAP No.

3/4" Roll-on Pipe Cutter Crimp Wheel

25081

1" - 2" Crimp Wheel

9735

1" - 2" Backup Crimp Wheel

9734

1" - 2" Cutting Tool

22653

2-3/8" - 3" Crimp Wheel

9713

2-3/8" - 3" Backup Crimp Wheel

9714

JDE No. 71846

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 21

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 22 December 17 2001 BJ Coiled Tubing Tools Catalog

Sequence Valve Sequence valves are often used in cementing and acid spotting operations. A sequence valve is designed to hold a positive pressure inside the coiled tubing and toolstring. The purpose is to allow control and placement of fluids in the well by preventing free fall of the fluids out of the tubing in a well with a low bottom hole pressure which may lead to collapse of the coiled tubing. Free fall of the fluids is likely when the well pressure is below that of hydrostatic column of the fluids that will be pumped into the CT string. Alternatively the valve may be used to allow positive pressure to be applied inside the coiled tubing whilst running in hole in a high pressure well that might impose a collapse load on the coiled tubing. The positive pressure differential is achieved by the valve system acting against a spring. In the Hydrostatic Sequence Valve the spring is coiled steel. In the Nitrogen Charged Sequence Valve the spring is a pre-charged nitrogen chamber. These sequence valves contain stored compressive energy and must therefore be handled with great care by fully trained personnel only. 2-3/8" Hydrostatic Sequence Valve The Hydrostatic Sequence Valve acts as a pressure controlled check-valve and backpressure valve. It provides surface control of fluid injected into the well. The valve is designed to handle both clean and abrasive fluids such as cement. Two Hydrostatic Sequence Valves can be stacked for a higher overall pressure rating. There is no need to run a Double Flapper Check Valve in a string which contains the Hydrostatic Sequence Valve. 2" N2 Sequence Valve The nitrogen chamber spring does not contain a compensating piston, as exists in the Hydrostatic Sequence Valve, therefore, the pre-charge pressure provides an absolute spring pressure. A correction factor must be applied to compensate for the rise in pressure of the nitrogen chamber gas resulting from rising temperature as the tool is run in the hole. The precharge setting is the valve opening pressure. For example, if the N2 chamber pressure is 2,000 psi, then 2,000 is the opening pressure. The nitrogen charged sequence valve has a higher differential operating pressure rating than the Hydrostatic Sequence Valve. Any release or ball operated tool should be run above the sequence valve. The sequence valve should not be confused with the Sequencing Valve (available from other suppliers) as their function and purpose is entirely different.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 23

Description 1-11/16" Abrasive Tool

Back Pressure Setting Range 0 - 2,300 psi

Working Pressure 5,000 psi

Tensile SAP Rating Length No. 16,000 lb

56.75"

1-11/16" Redress Kit 2" N2 - Abrasive Tool

0 - 6,000 psi

6,000 psi

20,000 lb

34.0"

22071 25223

0 - 2,300 psi

5,000 psi

20,000 lb

34.64"

2-1/8" Redress Kit 2-3/8" - Abrasive Tool

9114 9117

2" Redress Kit 2-1/8" Abrasive Tool

JDE No.

9393 25221

500 - 3,000 psi 5,000 psi

17,000 lb

34.64"

9001

2-3/8" Redress Kit

23539

1-11/16" SQV Assembly Tool Kit (for 5 redresses) 2" N2 SQV Assembly Tool Kit

9115 25299

2-3/8" SQV Assembly Tool Kit

9024

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 24 December 17 2001 BJ Coiled Tubing Tools Catalog

Double Dart Check Valve A Double Dart Check Valve is used on Coiled Tubing tool strings which are required to have a slick, slim O.D. These types of strings are usually used for simple clean-out operations. The O.D. is limited to the size of the coiled tubing being used. The tool consists of two darts in tandem which allow flow from the coiled tubing to the annulus but are pushed back onto their seats should there be any back flow. This prevents the well from producing up the coiled tubing if there is a break in the coiled tubing at surface. Activation balls cannot be pumped beyond the darts. The Double Dart Check Valve is available in the following diameters.

Description

O.D.

Length

Thread

SAP No. JDE No.

3/4" Assembly

3/4"

?

5/8" UNF

TBA

1" Assembly

1"

?

3/4-16UNF

TBA

1-1/4" Assembly

1-1/4"

7.5"

1"-12UNF

23721

854076

1-1/4" Redress Kit

1-1/4"

23921

854071

1-1/2" Assembly

1-1/2"

22711

852157

1-1/2" Redress Kit

1-1/2"

25025

25025

1-11/16" Assembly

1-11/16"

23673

852738

14" 14"

1-1/8"-10SA 1-1/8"-10SA

1-11/16" Redress Kit 1-11/16" 2" Assembly

2"

2" Redress Kit

2"

25025 1-56 – 8SA

28743 28745

Double Dart Check Valve No-Go Bodies O.D.

No-Go Size

SAP No. JDE No.

1-1/4" 1-1/2" 11117 1-1/4" 1-3/4" 25031 1-1/2" 1-3/4" 22565 1-11/16" 2" 23433 Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 25

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 26 December 17 2001 BJ Coiled Tubing Tools Catalog

BDK Double Dart Check Valve The BDK Double Dart Check Valve is available in the following diameters. The valve offers a safety system that ensures against reverse flow within the coiled tubing. PEEK darts and spring returns on the darts are available options.

Description

O.D.

Length Thread

1-1/4" 10.5" Assembly 1-1/4" Aluminum Redress Kit 1-1/4" Peek Redress Kit 1-1/2" 12.6" Assembly 1-1/2" Aluminum Redress Kit 1-1/2" Peek Redress Kit 1-11/16" 15" Assembly 1-11/16" Redress Kit Source: BJ Services - Tool Production

1"-12UNF

1-1/8"-10SA

1-1/8"-10SA

SAP No.

JDE No.

23383 23745 23747 22759 23663 23365 TBA TBA

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 27

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 28 December 17 2001 BJ Coiled Tubing Tools Catalog

Double Flapper Check Valve The Double Flapper Check Valve (DFCV) is run on virtually all non-stiffwireline coiled tubing operations. The Flappers prevent back flow from the well into the coiled tubing. This is required as CT is used in live well operations and if there is a failure in the tubing at surface, the well is prevented from flowing out through the CT by the closure of the check valves. Two flappers are used to ensure a double barrier. Flappers are held in the closed position by a light duty coil spring on the hinge so that the valve closes even at low pressure/flow differentials. The flappers are designed to allow the passage of balls to activate tools lower in the toolstring. The DFCV is normally placed immediately below the coiled tubing connector. Each flapper is part of a cartridge assembly and two cartridges are installed into the body of the tool. The BJS DFCV features a bleed-off port below the flappers so that any trapped pressures below the flapper can be released prior to removal of the tools. Another design feature is the retaining nut which holds the cartridges in place if the tool joint is backed off prior while there is still pressure below the cartridge. Prior to running in hole with the CT the DFCV must be pressure tested at both high and low pressure. Each flapper should be tested independently. The 1-11/16" and 1-3/4" will be available with O-ring style seat as soon as testing is complete.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 29

O.D.

I.D.

Length

Thread

Working Pressure

Tensile Rating

SAP No.

JDE No.

Tool

1-11/16" 0.625"

11.125"

1 1/8"-10SA 5,000 psi

25,000 lb

27451

Tool

1-3/4"

0.625"

11.125"

1 1/8"-10SA 5,000 psi

25,000 lb

11423 852229

Tool

2-1/8"

1.0"

12.0"

1.70"-10SA 5,000 psi

50,000 lb

9330

Tool

3-1/8"

1.062"

16"

2.5"-5 Acme 5,000 psi

130,000 lb 22079

71981

Redress 1-11/16"

28533

Redress 1-3/4"

22103

73545

Redress 2-1/8" to 4-3/4" Source: BJ Services - Tool Production

22685

71982

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 30 December 17 2001 BJ Coiled Tubing Tools Catalog

Double Flapper Check Valve with BDK Cartridge The Double Flapper Check Valve with BDK Cartridge is used on a tool string as a safety precaution to prevent fluid flow up the tubing. This can be a critical component in a live well where an open end at surface would allow the well to flow uncontrolled. N.B. Specifying this tool with a BDK cartridge will approximately double the cost. This third-party tool is: • Best in class • Bulk purchased for lowest cost • Delivered immediately from Tool Production inventory • Entered into the quality control system upon entry into Tool Production inventory.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 31

Description 1-3/4"

O.D.

0.688" 0.920"

Working Tensile Pressure Ratings

1 1/8"-10SA 5,000 psi 1.70"-10SA 5,000 psi 1.70"-10SA

3-1/8" 1.13"

23053

50,000 lb

23051 TBA

2 1/8"-8SA 14.7"

0.920" 4-3/4"

JDE No.

23819 1.125"

3-1/8" Redress

25,000 lb

SAP No. 600447

2-7/8"

2-7/8" Redress 3-1/8"

Thread 1 1/8"-10SA

2-1/8" 0.920" 12.25"

2-1/8" Redress 2-7/8"

Length

1-3/4" 0.625" 11.125"

1-3/4" Redress 2-1/8"

I.D.

28697

2.5"-5 Acme 5,000 psi 2.5"-5SA

17-1/2"

130,000 lb 23049 28697

5,000 psi

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 32 December 17 2001 BJ Coiled Tubing Tools Catalog

Vortex Nozzle The Vortex Nozzle uses four tangentially offset nozzles and optionally, a downward jet to produce a high powered vortex of fluid for the removal of muds, gels, waxes, asphaltenes, light scales and filtercake. Jet velocities often exceed 140 m/sec (460 ft/sec). Vortex rotational speeds at 8,000 rpm or more serve to entrain debris adding abrasion to the mechanism of cleaning. An alternative for harder scales is the Roto-Jet on page 63.

O.D.

Insert Type

Thread

Working Pressure

SAP No. JDE No.

1-3/8"

45°

1"-12UNF

TBA

10436

1-3/8"

90°

1"-12UNF

TBA

10435

1-11/16" 45° A

1 1/8"-10SA

5,000 psi

23415

1-11/16" 45° B

1 1/8"-10SA

5,000 psi

23417

1-11/16" 45° C

1 1/8"-10SA

5,000 psi

10494

76892

1-11/16" 90° A

1 1/8"-10SA

5,000 psi

10496

854027

1-11/16" 90° B

1 1/8"-10SA

5,000 psi

23695

1-11/16" 90° C

1 1/8"-10SA

5,000 psi

23697

2-1/8"

45° A

1.70"-10SA

5,000 psi

10498

854026

2-1/8"

45° B

1.70"-10SA

5,000 psi

22755

76517

2-1/8"

45° C

1.70"-10SA

5,000 psi

22757

76893

2-1/8"

90° A

1.70"-10SA

5,000 psi

10499

854028

2-1/8"

90° B

1.70"-10SA

5,000 psi

23703

2-1/8"

90° C

1.70"-10SA

5,000 psi

23705

2-7/8"

45° A

1.70"-10SA

5,000 psi

23709

2-7/8"

45° B

1.70"-10SA

5,000 psi

23711

2-7/8"

45° C

1.70"-10SA

5,000 psi

23713

2-7/8"

90° A

1.70"-10SA

5,000 psi

23715

2-7/8"

90° B

1.70"-10SA

5,000 psi

23717

2-7/8"

90° C

1.70"-10SA

5,000 psi

23719

854025

Cone Assembly

Vortex Nozzle Mule Shoe Assembly

O.D.

Type

Thread

Working Pressure SAP No. JDE No.

1-11/16" 45° A

1 1/8"-10SA

5,000 psi

10495

1-11/16" 45° B

1 1/8"-10SA

5,000 psi

23691

1-11/16" 45° C

1 1/8"-10SA

5,000 psi

23693

1-11/16" 90° A

1 1/8"-10SA

5,000 psi

10497

Muleshoe Assembly

853165

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 33

1-11/16" 90° B

1 1/8"-10SA

5,000 psi

23699

1-11/16" 90° C

1 1/8"-10SA

5,000 psi

23701

2-1/8"

90° A

1.70"-10SA

5,000 psi

10500

2-1/8"

90° B

1.70"-10SA

5,000 psi

22319

2-1/8"

90° C

1.70"-10SA

5,000 psi

23707

853331

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 34 December 17 2001 BJ Coiled Tubing Tools Catalog

Cleanout Nozzle A variety of nozzles are used to cleanout fill from vertical and horizontal wells. The fill may include produced sand or drilling solids. A variety of fluids will be used with the appropriate nozzles depending on particle size, density, well deviation profile, completion geometry, reservoir pressure and temperature. Fluids through the nozzles will include gelled water, nitrified water, stable foam, or water/gel/nitrogen slugs.

90o nozzle recommended for cementing.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 35

Description

O.D.

Straight Jet Nozzle 1"

Threads 3/4"-16 UNF

1-1/4"

1"-12 UNF

1-1/2"

1.125"-10SA

1-11/16" 1.125"-10SA

Jet Down Nozzle

2"

1.125"-10SA

2-1/8"

1.70"-10SA

2-7/8"

2.125"-8SA

3/4"

5/8"- 18UNF

1"

3/4"-16 UNF

1-1/4"

1"-12 UNF

1-1/2"

1.125"-10SA

1-11/16" 1.125"-10SA

Jet Up Nozzle

2"

1.125"-10SA

2"

1.568SA

2"

1.125"-10SA

2-1/2"

1-1/8"-10SA

2-7/8"

2.125"-8SA

1-1/4"

1"-12 UNF

1-1/2"

1.125"-10SA

1-11/16" 1.125"-10SA

Tangential Nozzle (Cementing)

2"

1.125"-10SA

2-1/8"

1.70"-10SA

2-7/8"

2.125"-8SA

1-1/4"

1"-12 UNF

1-1/2"

1.125"-10SA

1-11/16" 1.125"-10SA

Blank Nozzle

2"

1.125"-10SA

2-1/8"

1.70"-10SA

2-1/2"'

1-1/8"-10SA

2-7/8"

2.125"-8SA

1"

3/4"-16 UNF

1-1/4"

1"-12 UNF

1-1/2"

1.125"-10SA

1-11/16" 1.125"-10SA 2"

1.56 – 8SA

2"

1.125"-10SA

2-1/8"

1.70"-10SA

2-7/8"

2.125"-8SA

3-1/8"

2.5"-5A

SAP No. JDE No. 28623 10970 22703 10978 TBA 10984 TBA 25069 28625 10971 22701 22809 22805 28749 10986 22803 TBA 10972 22705 10980 10982 10988 TBA 10973 22707 22811 22807 10990 22801 TBA 28621 23685 23911 23909 28747 28741 10997 TBA 28753

854079 852153

854424

851287 852154 854425 854426 854427

851288 852155 854428 854429 854430

852156

854431

854432

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 36 December 17 2001 BJ Coiled Tubing Tools Catalog

Bakke Release Tool & Fishing Spear The Bakke Release Tool is a heavy duty ball operated tool designed to withstand torque and load applications such as drilling. Large bores help to minimize pressure drops. To release, a ball is pumped down the coiled tubing from surface. Once caught in the ball seat, the pressure required to release depends on the number of shear pins installed in the Bakke Tool (typically 1000 psi per shear pin). Ball sizes are ½”, ¾” and 1” respectively for those listed below. These tools are supplied nitrited for increased durability when ordered through Tool Production. Tensile and compressive loads are transmitted by the dogs, not the shear pins. There should always be a Bakke Fishing Spear available when the Release Tool is run. The Fishing Spear is not illustrated. This third-party tool is: • Best in class • Bulk purchased for lowest cost • Delivered immediately from Tool Production inventory • Entered into the quality control system upon entry into Tool Production inventory.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 37

Size

Description

I.D.

I.D. Ball

1-11/16" Tool 1-3/4" Tool 7/16" 1/2" 1-3/4" Redress Kit 1-3/4" Spear Redress Kit 1-3/4" Fishing Spear 2-1/8" Tool 11/16" 3/4" 2-1/8" Spear Redress Kit 2-1/8" Redress Kit 2-1/8" Fishing Spear 2-7/8" Tool 15/16" 1" 2-7/8" Redress Kit 2-7/8" Fishing Spear 3-1/8" Tool 15/16" 1" 3-1/8" Redress Kit 3-1/8" Fishing Spear Source: BJ Services - Tool Production

Working Tensile Pressure Ratings Length SAP No. JDE No. (psi) (lbs) 13-1/8"

15.28"

5,000

5,000

31,000

46,000

21"

5,000

91,000

21.1"

5,000

130,000

27395 12894 12897 600449 22787 12895 600479 22743 23217 23781 23815 23799 12896 22815 23071

73544 75578 73546 71983 71984

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 38 December 17 2001 BJ Coiled Tubing Tools Catalog

Kick-off Tool The Kick-off Tool is used where there is a possibility of hanging up on gas lift mandrels or other obstructions. When an obstruction is encountered, the Kick Off Tool rotates while compressing and then slides off the obstacle. After a deflection, the tool resets to its original running position and length.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 39

Size

Desc.

1-11/16"

Tool

1-11/16"

Redress Kit

1-3/4"

Tool

1-3/4"

Redress Kit

2-1/8" (53 mm)

Tool

2-1/8"

Redress Kit

3-1/8" (79.4 mm) Tool 3-1/8"

Length Threads Open

Length Working Tensile Closed Pressure Ratings

1 1/8"-10SA

44.6"

39.2"

5,000 psi

30,000 lb

1 1/8"-10SA

45.58"

39.10"

5,000 psi

30,000 lb

1.70"-10SA

69.59"

57.7"

5,000 psi

45,000 lb

2.5"-5 Acme

60.285"

48.785"

5,000 psi

77,000 lb

Redress Kit

SAP No.

JDE No.

23599 22745 25137 76518 22745 10718 76530 12762 12762 10702 23069

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 40 December 17 2001 BJ Coiled Tubing Tools Catalog

Centralizer Centralizers ensure centralization of coiled tubing tools within a casing. There are two models: (a) Sleeve, pictured at top (also known as non-rotating), pictured at top; and (b) Standard Fluted.

O.D.

Type

1-3/4", 2-1/8", 3-1/8", or as required

Sleeve

1-3/4", 2-1/8", 3-1/8", or as required

Standard Fluted

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 41

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 42 December 17 2001 BJ Coiled Tubing Tools Catalog

Dual Circulation Sub The Dual Circulation Sub is used to divert flow out to the wellbore above the tool string. Flow is diverted in one of two ways. (a) Flow may be diverted by pumping a ball down the coil. When the ball is caught in the Dual Circulation Sub, flow is blocked and rerouted directly to the wellbore, after shearing pins and moving the piston downward. (b) Flow may be diverted by increasing pressure in the string until a burst disk is ruptured allowing some of the flow out to the wellbore above the tool string. A variety of burst disks are available for a variety of triggering pressure differentials. Burst Discs are stocked in 3,000 psi, 3,500 psi, 4,000 psi and 5,000 psi ratings. Burst discs need to be ordered separately as the tool only comes supplied with a blank disc. Note: Burst disks are not approved for use in H2S wells. An exception is the 5,800 psi burst disk in the Lateral Entry Guidance System, described elsewhere in this catalog.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 43

Description O.D. Tool Redress Tool Redress Tool Redress Tool Redress Tool Redress

Ball Minimum Working Tensile SAP Size Length I.D. Pressure Ratings No.

1-11/16" 3/8"

7.73"

0.345"

5,000 psi

25,000 lb

1-3/4"

3/8"

7.73"

0.345"

5,000 psi

25,000 lb

2-1/8"

5/8"

7.73"

0.500"

5,000 psi

60,000 lb

2-7/8"

7/8"

11.0"

0.812"

7,000 psi

91,000 lb

3-1/8"

TBA

7.73"

Description

TBA

27431 27445 23035 23513 23475

JDE No.

76527 854822 76528

23515 23771 27443 TBA TBA

SAP No. JDE No.

Blank Burst Disk

22693

854826

3,000 psi Burst Disk

22691

76529

3,500 psi Burst Disk

23499

854823

4,000 psi Burst Disk

23115

854824

5,000 psi Burst Disk

22689

854825

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 44 December 17 2001 BJ Coiled Tubing Tools Catalog

Straight Bar Standard Straight Bar The purpose of a Straight Bar is to provide some centralization of downhole tools because coiled tubing retains some residual curvature even after being straightened by the injector chains. By giving the coiled tubing a straight section, the Straight Bar, at the bottom of the coiled tubing or bottom hole assembly, it is often easier to get past potential obstructions such as liner laps or gaslift mandrels. The outside diameter of the bar should be the same as the coiled tubing tool string that is being used. Different threads are available upon request. The straight bar is attached below the Check Valve and the Coiled Tubing End Connector. One or two meter long sections of straight bar are often all that is required to move past an obstruction. For an alternative, see the 'Kick Off Tool'. The shearable Straight Bar is designed to be cut by standard Coiled Tubing BOPs. They may be special ordered from Tool Production.

O.D.

Length

SAP No.

JDE No. 851290

1-1/4"

36"

9874

1-1/2"

36"

9875

1-1/2"

48"

9876

1-3/4"

36"

9863

1-3/4"

48"

2"

36"

854023

22751 854024 9873

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 45

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 46 December 17 2001 BJ Coiled Tubing Tools Catalog

Rod Clamp The Rod Clamp is used as a temporary non-damaging clamp while handling the tubing. It can be used in the injector while connecting the bottom hole assembly.

Side view of hinge plates

The holding force of a single clamp depends upon many factors. In general, it is not safe to assume more than 2,500 lb. holding force per clamp. A side-view and top-view of the Rod Clamp is depicted here.

Pipe O.D. 1-1/2"

Clamp O.D. 5.00"

SAP No. JDE No. 22681

852740

1-3/4" 5.30" 11161 2" 5.41" 11162 2-3/8" 5.79" 11163 2-7/8" 6.20" 11165 3-1/8" 9549 3-1/2" 6.69" 11164 Source: BJ Services - Tool Production

852739

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 47

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 48 December 17 2001 BJ Coiled Tubing Tools Catalog

Snake Grapple Connector The Snake Grapple Connector is used to stab coiled tubing into the injector head and stuffing box. It is placed on the end of the coiled tubing, shown as the upper-most sleeve in the picture. After the tool is positioned inside the coiled tubing, a portion of the tool housing is rotated to drive a wedge against a set of wickers which grip the internal surface of the coiled tubing. The tool contains a socket for a wire rope ferrule. A minimum of ½” cable is recommended. The wire cable extends from the hole in the bottom of the tool through the injector to a winch. The winch pulls the tubing into and through the injector. After the coiled tubing is successfully stabbed, then the Snake Grapple Connector is removed. A shackle-end version is available for out-of-alignment pulls.

O.D. SAP No. JDE No. 1-1/4" 1-1/2" 1-3/4" 2" 2-3/8" 2-7/8"

22683 22613 11166 9789 9894 10969

22683

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 49

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 50 December 17 2001 BJ Coiled Tubing Tools Catalog

Crossover Sub Crossover subs enable you to make connections between two incompatible threaded components. We select crossover subs from our stock or you can design them using our crossover program located in Lotus NOTES, Coiled Tubing Discussion database. If you require additional support, contact Engineering Support at (403) 531-6750.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 51

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 52 December 17 2001 BJ Coiled Tubing Tools Catalog

Precision Displacement Dart Precision Displacement Darts can be pumped ahead and behind a fluid, including slurries, to prevent contamination of the fluid with the other fluids being pumped. The darts contain a rupture disc that is triggered to burst at a predetermined pressure after the dart reaches a landing point in the bottom hole assembly. Once the disc ruptures a bore of 12 or 16 mm is exposed to allow passage of activation balls, if required. The use of these darts gives a surface pressure indication of when the fluid has been displaced to the end of the coiled tubing. This prevents such things as cement slurries from being over-displaced and, therefore, becoming contaminated during placement. The Precision Displacement Dart material is based on a nickel foil welded between stainless steel flanges and with a nose and body encapsulated in polyurethane. They are shaped to provide a seal with the tubing. The 12mm standard version cement dart has a heavy nose which encourages the dart to keep headdown in wider bore launch systems. A 1.25" nose is available upon special request. Standard 12mm bore darts fit 098 & 109WT tubing. Use the 13mm cementing dart on 156WT and give a bore through which a 1/2" ball can pass when required. The tail shape centers one dart behind another and enables a ball to be directed into and through the hole as it is swept along, even in horizontal sections. Specify a 120C, 140C or 160C temperature rating. For more information, see www.benoil.com.

Max Ball Size (in) CT Size (in) 1.00 1.25 1.50 1.75 2.00 2.375 2.875 3.50 4.50

7/16

Std 12 na 1240 1250 1260 1270 1280 1290 1300 1310

7/16

12 na 1241 1251 1261

1/2

9/16

Bore (mm) 13 16 12315 na 12415 1242 12515 1252 12615 1262 1272

11/16

20 na na 1253 1263 1273 1283

7/8

1

24 na na na 1264 1274 1284 1294 1304

27 Na na na na 1275 1285 1295 1305 1315

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 53

1.25 CTU, 098-125 WT; 12mm bore, metal OD 22mm, OD 28mm, 120C Color Pressure Code Part No. 1000psi yellow TBA 2000 orange TBA 2700 salmon TBA 3000 red TBA 4000 blue TBA 5000 black TBA 6000 brown TBA 1.50 CTU, 098-109 WT; 12mm bore, metal OD 22mm, OD 35 mm, 120C Color Pressure Code Part No. 1000psi yellow TBA 2000 orange TBA 2700 salmon TBA 3000 red TBA 4000 blue TBA 5000 black TBA 6000 brown TBA 1.50 CTU, 109-156 WT; 12mm bore, metal OD 22mm, OD 32.5 mm, 120C Color Pressure Code Part No. 1000psi yellow TBA 2000 orange TBA 2700 salmon TBA 3000 red TBA 4000 blue TBA 5000 black TBA 6000 brown TBA 1.75 CTU, 109-156 WT; 12mm bore, metal OD 22mm, OD 39 mm, 120C Color Pressure Code Part No. 1000psi yellow TBA 2000 orange TBA 2700 salmon TBA 3000 red TBA 4000 blue TBA 5000 black TBA 6000 brown TBA

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 54 December 17 2001 BJ Coiled Tubing Tools Catalog

2.00 CTU, 109-156 WT; 12mm bore, metal OD 22mm, OD 45.5 mm, 120C Color Pressure Code Part No. 1000psi Yellow TBA 2000 Orange TBA 2700 Salmon TBA 3000 Red TBA 4000 Blue TBA 5000 Black TBA 6000 Brown TBA 1.25 CTU, 087-098 WT; 16mm bore, with cone tail, OD 28 mm, 120C Color Pressure Code Part No. 1000*psi Yellow TBA 2000* Orange TBA 2500 Salmon TBA 3500 Red TBA 4300 Lt. blue TBA 6500* Black TBA 1.25 CTU, - WT; 16mm bore, with cone tail, OD - mm, 120C Color Pressure Code Part No. 1000*psi Yellow TBA 2000* Orange TBA 2500 Salmon TBA 3500 Red TBA 4300 Lt. blue TBA 6500* Black TBA 1.50 CTU, 087-109 WT; 16mm bore, with cone tail, OD 34 mm, 120C Color Pressure Code Part No. 1000*psi Yellow TBA 2000* Orange TBA 2500 Salmon TBA 3500 Red TBA 4300 Lt. blue TBA 6500* Black TBA 1.50 CTU, 125-156 WT; 16mm bore, with cone tail, OD 32 mm, 120C. * = subject to confirmation. Color Pressure Code Part No. 1000*psi Yellow TBA 2000* Orange TBA 2500 Salmon TBA 3500 Red TBA 4300 Lt. blue TBA 6500* black TBA

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 55

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 56 December 17 2001 BJ Coiled Tubing Tools Catalog

Shearable Center Displacement Plug The plug is held with a crosswire, whose thickness is given in the list and which shears at the given pressure. Pigs are designed to nest into each other so that a 2500psi pig can follow a 1750psi pig and they will shear in known succession. These pigs usually need a catcher for the plug. These have only been made in the wire sizes indicated and for the coil tubing sizes indicated. The list could be extended, but some preliminary work with thicker wires suggests that it may be difficult to obtain consistent results. For more information, see www.benoil.com. 1.25" CT For use in 098-125WT tubing 72thou wire 2500psi orange 64thou wire 1750psi blue

TBA TBA

1.50” CT For use in 098-125WT tubing 72thou wire 2500psi black 64thou wire 1750psi white

TBA TBA

For 156WT tubing, use the following. They use a reduced diameter centre to avoid sticking. 72thou wire 2500psi yellow TBA 64thou wire 1750psi green TBA 1.75" CT For use in 098-156WT tubing 72thou wire 2500psi orange 64thou wire 1750psi blue

TBA TBA

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 57

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 58 December 17 2001 BJ Coiled Tubing Tools Catalog

Plug Catcher Sub The Plug Catcher is run below the tubing end connector. The plug catcher stops as many as three shearable portions of the plugs but allows a ball to pass around the assembly to operate a release tool fitted with a small ball catcher.

O.D.

Length

Maximum Ball Size

1-3/4"

8.0"

3/8"

SAP No. JDE No. 9156

76519

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 59

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 60 December 17 2001 BJ Coiled Tubing Tools Catalog

Specialized Tools

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 61

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 62 December 17 2001 BJ Coiled Tubing Tools Catalog

Roto-Jet The Roto-Jet is designed to clean deposits from vertical and horizontal wellbores. Deposits may range in hardness from mineral scales through to gels and particulates. Controlled-rotation, high-velocity and high hydrodynamic liquid jets have proven to be more effective at cleaning scale encrusted tubing in a single pass than conventional static jetting nozzles. Controlled rotation is a key factor in reducing the dispersion of the jet and inducing cyclic stress in the scale which leads to efficient removal. The basic tool is the 1-3/4” size. Conversion kits allow for 2-1/8” or 2-7/8” configurations and are available upon request. The 2-1/8” tool differs from the 1-3/4” tool only in the strength of the housings, i.e., a larger diameter. Flow handling capacity is the same. The 2-7/8” tool permits jetting in larger completions where flow rates in excess of 1-1/2 barrels per minute are required to circulate debris from the well. Flow rates up to 3-1/2 barrels per minute are possible with the standard 2-7/8” tool. For higher flow rates contact Tool Production for a special bypass sub.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 63

O.D.

Desc.

1-3/4" Tool

Length 87.5" (2222.50mm)

Working Press. 5,000 psi

Tensile Tensile Max. Pull @ Pull @ 0 50000 Operating SAP JDE Temp. No. No. psi psi 20,000 lbs

0 lbs

o

400 F o (200 C)

1-3/4" Redress Kit

22107 23105 73545

1-3/4" Nozzles S90A..S90E S45A..S45E

1-3/4" Roto-Jet Kit* 2-1/8" Tool

22109 73543 88.6" (2250.44mm)

5,000 psi

25,000 psi

0 lbs

o

400 F o (200 C)

2-1/8" Redress Kit

22535 23103

2-1/8" Nozzles R90A..R90E R45A..R45E

2-1/8" Roto-Jet Kit* 2-7/8" Tool

22533 106" (2692.40mm)

5,000 psi

2-7/8" Redress Kit

20,000 lbs

10,000 lbs

o

400 F o (200 C)

22217 23107

2-7/8" Nozzles R901..R903(A-C) R45A..R45C

2-7/8" Roto-Jet Kit*

22379

Roto-Jet 9674 Tachometer * contains a Roto-Jet Tool complete with downhole filter, surface filter, nozzles, hand tools, spare bearing housings, extra moles and redress parts for 5 complete redresses. Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 64 December 17 2001 BJ Coiled Tubing Tools Catalog

Roto-Jet - Options Oversize Moles: Listed below are the SAP part numbers for: 2-1/8” O.D. Shroud for 1-3/4” RJT R90-2 Mole Sub-Assembly. 2-7/8” O.D. Shroud for 1-3/4” RJT R90-2 Mole Sub-Assembly. 3-3/8” O.D. Shroud for 1-3/4” RJT R90-2 Mole Sub-Assembly. 3-3/8” O.D. Shroud for 2-1/8” RJT R90-2 Mole Sub-Assembly. Also available: Low Flow Roto-jet Conversion Kits for 1-3/4 Roto-Jet Carbide Nozzles Roto-Jet Dump Subs Call for details.

Description

SAP No. JDE No.

Bullnose 45 deg. – 1-3/4" RJT* Bullnose 45 deg. – 2-1/8" RJT Bullnose 45 deg. – 2-7/8" RJT OS** Mole Kit 1-3/4" To 2-1/8" OS Mole Kit 1-3/4" To 2-7/8"

23527 23573 23679 28611 22995

OS Mole Kit 1-3/4" To 3-3/8" OS Mole Kit 2-1/8" To 3-3/8" OS Mole Kit 2-1/8" R45 Bulnose 1-3/4" OS Mole Kit 2.52" OD R45 Bullnose 1-3/4" OS Mole Kit 2.52" OD R90 Bullnose 1-3/4" 2" S45M 1-3/4" RJT Shroud Centralizer 2-1/2" S45M 1-3/4" RJT Shroud Centralizer 2-1/4" S45M 1-3/4" RJT Shroud Centralizer *RJT = Roto-Jet Tool **OS = Oversize

22993 22991 28785 28787 600427 28771 28773 28755

Bullnose 45o

Source: BJ Services - Tool Production

Oversize Mole F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 65

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 66 December 17 2001 BJ Coiled Tubing Tools Catalog

Tornado

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 67

O.D. 1-3/4"

Description

Length

Tool

SAP No. JDE No. US$ TBA

TBA

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 68 December 17 2001 BJ Coiled Tubing Tools Catalog

Downhole Phase Separator The Downhole Phase Separator is a tool for dividing gaseous and liquid phases in a jetting or milling tool string downhole. As the co-mingled fluid passes through the inner geometry of the tool liquid and gas phases are separated. Gas exits the tool string above the jetting tool or motor, while the liquid continues down the tool string to provide maximum hydraulic power. The Downhole Phase Separator has no moving parts. V.1 is for light duty. V.2 is for acid service. V.3 is for general service.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 69

1 3/4" & 2 1/8" Tool Total Maximum Combined Flow Rate (at BHP & T) Min Total Combined Flow Rate (at BHP & T) Minimum Gas Fraction (at BHP & T) Maximum Gas Fraction (at BHP & T) Max gas carry-over Maximum Differential pressure Maximum Pressure Drop across Tool

O.D.

Description

Length

Differential Pressure

1-3/4" Tool V1 35" 5000 psi 1-3/4" Redress Kit V1 1-3/4" Tool V2 35" 5000 psi 1-3/4" Redress Kit V2 1-3/4" Tool V3 2-1/8" Tool V2 35" 5000 psi 2-1/8" Tool V3 2-7/8" Tool V2 60" 5,000 psi 2-7/8" Tool V3 60" 5,000 psi Source: BJ Services - Tool Production

4 bpm 0.5 bpm 5% 85% 2% 5,000 psi 100 psi

Tensile Ratings 25,000 lb 25,000 lb

40,000 lb 50,000 lb 50,000 lb

2 7/8" Tool 7 bpm 0.5 bpm 5% 80% 2% 5,000 psi 150 psi

SAP No. JDE No. 23295 23453 25045 28789 TBA 23961 TBA 25315 28619

71607 76525

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 70 December 17 2001 BJ Coiled Tubing Tools Catalog

Well-Vac The Well-Vac has two important and very different purposes: • Sand-Vac Mode for debris clean-out; and • Well-Vac Mode for producing wellbore fluids In Sand-Vac mode, the tool cleans vertical and horizontal wellbores of sand and loose debris by fluidizing and entraining the material in the return flow of a concentric coiled tubing (CCT) string. The Well-Vac has been carefully designed to prevent cave-in or damage to the hole and filter-cake. Power fluid is pumped down the internal string and returned up the annulus between two coiled tubing strings. The Well-Vac creates a venturi effect at the face of the tool as the fluid passes through a specially designed jet pump and from the internal string to the annulus. Tangential jets on the Well-Vac (2-1/2") swirl debris into forward and backward moving slurries. The forward moving slurry maximizes travel speed and minimizes the duration of the cleanout operation. The backward slurry is pulled into suction ports and sent through the annulus between strings, and out of the well. The Well-Vac (3-3/4") has an external fluted sleeve that is shear pinned to the interior body. When zinc alloy pins are sheared by over-pull or acidizing the BHA becomes a flush profile & will be released. The 2-1/2" Well-Vac is equipped with shear rings at the upper end of the tool. Aluminium rings are used for releasing the tool from inner and outer strings upon an overpull or acidizing. Brass rings are used in acid work to prevent accidental tool release. The 2-1/2" Well-Vac can also be equipped with a Downhole Pressure/Temperature Memory Unit in the forward nozzle to record BHP and BHT, and another Downhole Pressure/Temperature Memory Unit to record diffuser pressure. This option requires additional components and increases the overall length of the tool by approximately 20 inches. The Well-Vac (3-3/4") runs on 1-1/4", 2-3/8" CCT. The Well-Vac (2-1/2") runs on 1", 2" CCT or 1-1/4", 2-3/8" CCT. A complete system analysis is required before ordering this tool. Contact Tool Production for assistance.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 71

O.D.

Description

Differential SAP Length Pressure No.

2-1/2" Tool 93.2" 2-1/2" Hand Tool Kit 2-1/2" Redress Kit 3-3/4" Tool 44.58" 5,000 psi 3-3/4" BullNose SubAssy 3-3/4" Hand Tool Kit 3-3/4" Redress Kit 3-3/4" O-Ring Redress Kit 3-3/4" Recirculating Kit Source: BJ Services - Tool Production

JDE No.

9653

22623 22351 75553 22647 22649 25305 22955

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 72 December 17 2001 BJ Coiled Tubing Tools Catalog

Concentric Tubing Surface Connector The Concentric Tubing Surface Connector splits the inner coiled tubing flow from the outer coiled tubing flow. The connector is fastened to the hub of the concentric coiled tubing spool. Depending on the application, fluids may be pumped via the Concentric Tubing Surface Connector into the inner coiled tubing with returns coming back through the annulus between the two coiled tubing strings or visa versa. It is used with the Well-Vac tool.

* not included Outer C.T. 1-1/2" 2" 2-3/8" Source:

Inner C.T.

Length Width

SAP No.

JDE No.

¾" 9553 1" 19.5" 12.3" 600351 1 1/4" 19.5" 12.3" 9687 BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 73

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 74 December 17 2001 BJ Coiled Tubing Tools Catalog

Lateral Entry Guidance System The Lateral Entry Guidance System (L.E.G.S.) provides a fast and easy method to enter and stimulate all branches in a multiple-completion well. The L.E.G.S. tool locates and steers coiled tubing into any branch of a multiple completion well using a special methodology which circumvents any need for an electrical control or steering system. All branches or sidetracks can be serviced in a single operation without returning to the surface between runs. The Well-Vac can be used with the L.E.G.S. tool.

Description

Length SAP O.D. with filter No.

LEGS Tool 2-1/8' 16.5 ft Complete LEGS Kit 2-1/8' 16.5 ft Spare Machine Parts Kit Spool Valve Piston Kit Wands, 6" to 36" Kit O-Ring Teflon Backup Kit Slyd Rings, Spiroloks & Msc. Kit Hand Tools Kit Incolloy Upgrades Source: BJ Services - Tool Production

JDE No.

27199 27479 27469 27471 27439 27465 27467 27477 9528

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 75

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 76 December 17 2001 BJ Coiled Tubing Tools Catalog

Straddle Packer The Straddle Packer contains two inflatable packers spaced as required to cover the treatment interval. The inflation sequence is initiated simply by increasing the pump rate to a pre-set value, which closes a latch valve, filling the elements. Deflation is accomplished by a simple pulling action to open the latch valve, allowing the element to deflate. The tool is then ready to be moved to the next treatment interval. The Sequence Valve in the tool string stops U-tubing effects of fluids during placement. Circulation is maintained while running in the hole or pulling out of the hole with continuous communication between the top and bottom of the tool string to prevent swabbing while moving the tool. The following specifications incorporate a significant safety factor: • • • • •

Packer elements are rated for 20 inflations in 7” casing. The elements are rated to 280o F (137o C). Minimum allowable retrieval diameter after inflations is 3.25”. Maximum differential squeeze pressure in 7” casing (liner) is 2,000 psi. Maximum flow (squeeze) rate is 2.5 bpm. Maximum set-down weight = 10,000 lbf.

O.D.

Description

SAP No. JDE No.

3-1/8"

Tool 23615 Packer Element 10506 Source: BJ Services - Tool Production 3.0"

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 77

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 78 December 17 2001 BJ Coiled Tubing Tools Catalog

Universal Connect / Disconnect (UCD) Top Sub The Universal Connect / Disconnect (UCD) is a quick connector for joining strings without rotation. Threading is not involved in the connection so that tension, compression and torque loads can be transmitted. The UCD provides a hands-free, remote deployment capability, which is especially crucial when used in live well operations. It is used during vertical deepenings, frac jobs and perforating gun deployment. The two methods of pressuring up the UCD are: a) by using a modified BOP stack and additional isolation barriers in the stack. b) by a hand pump connected to a port on the UCD. The hand pump may only be used when remote operation is not required. The connection process is (1) pressure up the UCD, (2) stab the two halves of the UCD together (torque keys self-align), and (3) release pressure, to lock the UCD halves together. The disconnect process is (1) pressure up the UCD, (2) withdraw the two halves of the UCD, and then (3) release pressure. Two additional configurations of the UCD are: a) conversion to a BOSS (Ball Operated Shear Sub) tool providing an emergency release for a BHA that may become stuck in the hole. Pumping a 7/8" diameter ball from surface shears a pin in the UCD to effect an emergency release. b) for use with BJ's wet connectors to provide a reliable electrical connection, a flow path for fluids, and a strong mechanical connection.

O.D. 3 3/8"

Description

Length

SAP No. JDE No.

22.5"

Tool 12145 Source: BJ Services - Tool Production

Bottom Sub

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 79

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 80 December 17 2001 BJ Coiled Tubing Tools Catalog

Bakke Motor-head The Bakke Oil Tools Moto-head assembly contains dual flapper valves, a hydraulic disconnect and a dual circulating sub. The flapper cartridges have been tested by Bakke to 10,000 psi at 400 deg. F. The heavy duty hydraulic disconnect provides heavy-duty rotation lock to withstand vibration and high torque for long milling operations. Bending of this tool will not affect the shear pin value as is the case with a collet type tool. The large bore minimizes pressure drop.

O.D.

Description

SAP No. JDE No.

4-3/4" Bakke Motorhead 9639 Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 81

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 82 December 17 2001 BJ Coiled Tubing Tools Catalog

Parabow The Parabow is run on coiled tubing to the point in the well where a cement plug is to be situated. After the tool is in position a ball is sent downhole to activate a piston, shut-off circulation, and extrude the inner portion of the tool beneath the tool housing. The inner portion then expands creating a seat for a cement plug.

O.D. Desc. Length SAP No. JDE No. 2-1/8"

49.68" Tool 65505-1 Refill 65462 Source: BJ Services - Tomball, Texas, USA

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 83

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 84 December 17 2001 BJ Coiled Tubing Tools Catalog

Wireline Tools

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 85

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 86 December 17 2001 BJ Coiled Tubing Tools Catalog

Stiff Wireline Connector Function Summary: • mechanical connection from the coiled tubing connector to the wireline (logging) tools. • Electrical connection through an electrical pressure bulkhead. • Flow bypass for circulating well. • Back pressure valve. Circulation is often required during coiled tubing logging or perforating operations so the Stiff Wireline Connector features circulation ports and a back-pressure valve. The back-pressure valve is spring loaded and adjustable from 500 to 2,200 psi. This valve allows a positive internal pressure to be held in the coiled tubing and also acts as a back-pressure valve to maintain well control should there be a loss of pipe integrity at surface. The tool includes an anchor sub which secures the logging cable and an electrical pressure bulkhead sub where the logging cable is attached to conventional electric line pin connections. Uphole thread: 1-1/8” – 10SA Downhole thread: 1-3/16” – 12 UN left hand thread. A Tension Release Tool is usually connected below the Stiff Wireline Connector to provide an emergency release mechanism (see page 91).

O.D.

Description

Tensile Rating

20,000 lb Single Conductor 20,000 lb Four Conductor Redress Kit Hand Tools & Test Sub(s) Hand Tools Kit Source: BJ Services - Tool Production

1-11/16" 1-11/16" 1-11/16" 1-11/16"

Working SAP Pressure No. 5,000 psi 5,000 psi

JDE No.

9423 9424 22593 9428 28517

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 87

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 88 December 17 2001 BJ Coiled Tubing Tools Catalog

Snap Latch The Snap Latch tool enables fast rig-up of long logging tools to a wireline string. The Snap Latch does not require rotation of an entire tool string because there is no threaded connection. Wireline (logging) tools connected beneath the Snap Latch can be rotated at will. The tools can be disconnected only by rotating a collet retainer four turns and then pulling up. The Snap Latch provides a quick mechanical and electrical connection between two parts of a tool string. The Snap Latch can be especially useful when tool strings must be deployed a section at a time because of length restrictions imposed by the lubricator. A Tension Release Tool, described on the next page, is usually run with a Snap Latch for emergency release. For an alternative to the Snap Latch see the Universal Connect / Disconnect (UCD) on page 79.

O.D.

Tensile Description Length Ratings

1-11/16" Banana Plug 1-11/16" Pin Connector 1-11/16" Redress Kit Hand Tools Kit

Differential Working SAP Pressure No.

10.70"

16,000 lbs

5,000 psi

10.70"

16,000 lbs

5,000 psi

JDE No.

9133 76520 9134 23735 76521 28515

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 89

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 90 December 17 2001 BJ Coiled Tubing Tools Catalog

Tension Release Tool The Tension Release Tool is usually placed below the Stiff Wireline Connector and above the logging or perforating string. An electrical connection runs through the Tension Release tool. An anti-rotation lug in the Tension Release Tool prevents rotation of the two halves' of the tool to prevents breakage of the electrical connection. A 5,000 lb over-pull triggers a release. If the logging or perforating tool string becomes trapped in the well, the coiled tubing can be retrieved by pulling on the Tension Release Tool to trigger release. A collet within the Tension Release Tool moves against a stack of disc springs until release is achieved. If the Tension Release Tool is disconnected, a 3/4" External Fishneck is left behind in the hole. The tool can be re-latched later with a fishing string. The Tension Release Tool is designed to absorb the shock from perforating operations and can be used in highly deviated wells. A proper job design takes into account both the tool string weight and frictional drag so that the 5,000 lbf. release load is not inadvertently reached. Uphole thread: Downhole thread: Fishneck size:

1-3/16” – 12 UN left hand thread; 1-3/16” – 12 UN right hand thread. 0.75” O.D.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 91

O.D. 1-11/16" 1-11/16"

Description Tool

Length 15.82"

Tensile Pull Working SAP Tensile to Ratings Release Pressure No. 15,000 lb

Redress Kit Hand Tools Kit* * includes Test Sub(s) Source: BJ Services - Tool Production 1-11/16"

5,000 lb

5,000 psi

JDE No.

9498 28521 28519

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 92 December 17 2001 BJ Coiled Tubing Tools Catalog

Bakke Flow Release Cable Head The Bakke Flow Release Cable Head is used on CT e-line operations and is designed for heavier duty than the Stiff Wireline Connector and TRT. The tool provides the following functions; a) Cable Anchor b) Electrical Bulkhead c) Fluid flow and back pressure check valves d) Two Step toolstring release e) Load is carried by heavy duty segments The toolstring is released by pumping at a predetermined rate through the check valves and exhaust orifice to generate a pressure inside the tool which forces a piston against a spring. Once the piston has moved fully the segments are released and the tensile load is allowed to come onto the shear pins. Final release is achieved by shearing the pins by either pulling on the tool or continuing to increase the pump rate.

O.D.

Length

Tensile Ratings

Working Pressure

1-3/4" TBA TBA TBA 2" TBA 53,000 7500 2-1/2" TBA 77,000 7500 3-1/8" TBA TBA TBA Source: BJ Services - Tool Production

SAP No. TBA TBA TBA TBA

JDE No. TBA TBA TBA TBA

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 93

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 94 December 17 2001 BJ Coiled Tubing Tools Catalog

Contact Sub Contact Subs are part of the Stiff Wireline Connector. Specify your thread requirements when ordering. The contact subs are shown in the same order as they are listed in the chart below. Specify your thread requirements when ordering. A 1-11/16 shearable straight bar is available upon request.

Description

O.D.

Tensile Ratings

Teardrop, spring pin 1-7/16" 20,000 lb Swivel, spring pin 1-11/16" 20,000 lb Swivel, banana plug 1-11/16" 20,000 lb Teardrop, banana plug 1-7/16" 20,000 lb Contact Sub, banana plug 1-7/16" 20,000 lb Type 'S'Contact Sub, 1-11/16" 20,000 lb banana plug Source: BJ Services - Tool Production

SAP No.

JDE No.

9048 9049 9050 9051 9052 9054

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 95

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 96 December 17 2001 BJ Coiled Tubing Tools Catalog

BJ Wireline Pressure Bulkhead The BJ Wireline Pressure Bulkhead uses Kemlon Connectors and a 2” Fig. 1502 WECO hammer union to allow electrical wireline to be passed into a pressurized coiled tubing reel. The signal is passed from the pressure bulkhead through an electrical quick connect to a signal collector at the center of the reel. As many as eight wires can be connected and anchored within the sub. In this way, connection can be made from downhole and run to the Slip Ring or Collector. This Bulkhead is suitable for applications up to 10,000 psi.

* Not Included

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 97

O.D. 3-3/4" 3-3/4"

Description Tool

Length SAP No. JDE No. 17-3/4"

Redress Kit Slip Ring Assembly Source: BJ Services - Tool Production 3-3/4"

9699

74014

23919 22021

74015

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 98 December 17 2001 BJ Coiled Tubing Tools Catalog

Bakke Wireline Pressure Bulkhead The Bakke Wireline Pressure Bulkhead is used inside the Stiff Wireline Reel to anchor the e-line cable, typically either a 7/16" or 3/8" Hepta Cable. The bulkhead allows the cable to exit the reel and prevent fluids from leaking. The differential pressure rating of this model is 5,000 psi. The bulkhead attaches to the CT via a Fig. 1502 Weco Hammer Union. Features: • Easy to install • No Kemlon pins (simplicity and economical) • Final electrical connections are not in a wetted area • When used with a Trollex Collector this system is Zone II rated • When used with an alternative collector it is considered as "Rig Safe" This third-party tool is: • Best in class • Bulk purchased for lowest cost • Delivered immediately from Tool Production inventory • Entered into the quality control system upon entry into Tool Production inventory.

Description

SAP No. JDE No.

Tool 27379 Trollex Collector TBA Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 99

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 100 December 17 2001 BJ Coiled Tubing Tools Catalog

Drilling Tools

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 101

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 102 December 17 2001 BJ Coiled Tubing Tools Catalog

Bottom Hole Assembly The Drilling Using Coiled Tubing (DUCT) Bottom Hole Assembly (BHA) is comprised of the following in descending order: • • • • • • • •

BOSS Anchor Tool 3-3/8” UCD Tool Steering Tool 3-3/8” UCD Tool Orientation Tool (c/w Popper Check Valve sub. Drilling Motor Bent Sub Drilling Bit

BOSS Anchor Tool

Tubing Grapple

UCD Bottom Sub

UCD Bottom Sub

UCD Top Sub

Steering Tool

Orientation Tool

Positive Displacement Motor *

UCD Top Sub

Poppet Check Valve Sub

Bent Housing * Bit *

* indicates components which are not supplied.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 103

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 104 December 17 2001 BJ Coiled Tubing Tools Catalog

Boss Anchor The Boss Anchor V3 is a flow through cable anchor to be used at the top of the tool string, designed to withstand both torque and axial loads. It incorporates a Double Flapper Check Valve in the flow passage, as well as a ball catcher for the release mechanism. The cable anchor is a sealed unit down the center of the tool with the flow passage around the inner annulus of the tool assembly. Anchor of the cable is such that it is allowed to "tear away" when the B.O.S.S. is activated.

O.D.

Description

Length SAP No. JDE No.

3 1/8"

32.0" Boss Anchor V3 23503 Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 105

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 106 December 17 2001 BJ Coiled Tubing Tools Catalog

Steering Tool The Steering Tool is part of the coiled tubing directional drilling bottom hole assembly. It contains: • an accelerometer triad, tool face angle and inclination. • a magnetometer triad to give real-time azimuth and inclination. • a gamma tool for measuring the natural gamma radiation of the formations. • temperature sensors • shock sensors • BHA tubing pressure and annulus pressure

O.D. 3-1/8"

Description Steering Tool

Length with UCD Top Sub 345.8"

SAP No. JDE No. 12289

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 107

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 108 December 17 2001 BJ Coiled Tubing Tools Catalog

Orientation Tool The Orientation Tool is part of the coiled tubing directional drilling bottom hole assembly. The function of the tool is to change the bottom hole assembly Tool Face angle while drilling. Orienting can be achieved without interrupting the drilling process. The Orientation Tool is an electric over hydraulic system. It is operated at surface with the aid of a computer controlled power supply. The Orientation Tool also houses a circulating valve. The circulating valve is a hydraulic device which, when closed, directs all circulating fluids to the drill motor. When the valve is open the circulating fluids are directed to the annulus allowing for more efficient hole cleaning using a patented process.

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 109

O.D. 3-3/8"

Description Orientation Tool

Length with UCD Bottom Torque Output Sub 160.0"

1500 ft-lb

Thread 2 3/8" API REG.

SAP No.

JDE No.

22105

Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 110 December 17 2001 BJ Coiled Tubing Tools Catalog

Downhole Pressure/Temperature Memory Unit This robust Downhole Pressure/Temperature Memory Unit operates in environments up to 70 MPa in pressure and 150oC in temperature, under high gravitational loading. The unit has a memory capacity for 500,000 samples and comes with software to setup and program the tool. Sampling rates are from 1 second to several hours. The small, long-life lithium battery provides many hours of tool operation. The estimated battery life is calculated by the software. Battery life is dependant upon downhole temperature, sampling rate and battery manufacture. At an extreme, battery life can be more than 100 hours while sampling once per second and at extreme operating conditions such as 150oC downhole temperature. Tools which can incorporate use of this tool include: the Roto-Jet, Well-Vac, Lateral Entry Guidance System and in BJ horizontal drilling strings. An 'Acquisition' software page provides the basic commands for programming and downloading data from the unit. Under the 'Processing' tab you will find the commands for manipulating data files. 'Reporting' presents commands for producing reports and graphs. A 'Utilities' tab provides options for real-time sampling of data from the unit at surface and downloading of the binary memory image for later analysis. The following tools can accommodate the unit with a corresponding letter (see Tool column).

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 111

For Roto-Jet (1-3/4") Lateral Entry Guidance Lateral Entry Guidance System Roto-Jet (2-7/8") Drilling Roto-Jet (3-1/8")

Housing O.D. 1-3/4"

Housing Length

Thread

18.2"

1-1/8-10S.A.

`

#

2-1/8"

14.5"

1.7-10S.A.

`

#

2-1/8" 2-7/8"

23.5"

1.7-10S.A

`

`

15.5"

2-1/8-8S.A.

`

#

TBA

3-1/8" 3-1/8"

15.5"

2-1/8-8S.A.

`

#

TBA

2.5-5A.

`

`

TBA

Wellbore Tool SAP JDE Pressure Pressure No. No. TBA TBA TBA

26" Source: BJ Services - Tool Production

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 112 December 17 2001 BJ Coiled Tubing Tools Catalog

Well Construction Equipment

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 113

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 114 December 17 2001 BJ Coiled Tubing Tools Catalog

Side Entry Sub The Side Entry Sub anchors a parasite injection string onto casing. The casing string is landed and cemented into place. Gas can then be injected into the returning mud column to facilitate further underbalanced drilling of the next hole section. An aluminum pump-out plug seals the port during run-in and cementing. When drilling resumes the port is opened by pressuring up the parasite string to pump-out the plug. If necessary, acidizing the shear pin will ensure removal of the plug, and opening of the port. The coil tubing / Side Entry Sub connection can be pressure tested prior to running in the hole. Due to the need to match the casing grade, this item is special order only.

O.D. Length 7.969"

40"

9.500"

40"

Thread

5 1/2" API 8 Round Long Casing 7" API 8 Round Long Casing 11.294" 40" 8 5/8" API 8 Round Long Casing 12.283" 40" 9 5/8" IPSCO-QB2 5 TPI Source: BJ Services - Tool Production

SAP No. JDE No. 9356 9357 9358 9359

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 115

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 116 December 17 2001 BJ Coiled Tubing Tools Catalog

User Comments Manual Name: Document Date: Are there sections of this manual you especially like? Are there topics that you think need more explanation or graphical representation?

Please identify any errors and their location in the manual.

What parts of the manual do you use most? What additional material would you like added to future a version of this manual?

Other comments? If you would like to receive an update: Your name: Your address: Please rate this manual:

Excellent

Acceptable

Poor

Did not use

BJ Services Coiled Tubing Research, Development & Engineering Technical Publications 6620 – 36 St. S.E. Calgary, Alberta, Canada. T2C 2G4 Fax (403) 531-6751

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 117

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 118 December 17 2001 BJ Coiled Tubing Tools Catalog

Index A Anchor – Boss ............................................... 105

Contact Sub......................................................95 Crossover Sub..................................................51

B back-pressure valve ........................................ 23 Bakke Flow Release Cable Head.................... 93 Bakke Moto-head ............................................ 81 Bakke Release Tool & Fishing Spear.............. 37 Bakke Wireline Pressure Bulkhead ................. 99 Bar - Straight ................................................... 45 BDK Dimpleon Connector ............................... 15 BDK Double Dart Check Valve........................ 27 BJ Wireline Pressure Bulkhead....................... 97 Boss Anchor .................................................. 105 Bulkhead – Bakke Wireline Pressure .............. 99 Bulkhead - BJ Wireline Pressure..................... 97

D Dart – Precision Displacement.........................53 deposits removal ..............................................63 Disconnect (UCD) ...........................................79 Displacement Dart............................................53 Double Dart Check Valve.................................25 Double Dart Check Valve - BDK ......................27 Double Flapper Check Valve ...........................29 Double Flapper Check Valve - .........................31 Double Flapper Check Valve with BDK Cartridge ......................................................................31 Downhole Filter Sub...........................................9 Downhole Phase Separator .............................69 Downhole Sensing Tool .................................111 Dual Circulation Sub ........................................43

C calcium carbonates.......................................... 63 Catcher Sub - Plugs ........................................ 59 Cementing Dart ............................................... 53 Centralizer ....................................................... 41 Check Valve .................................................... 29 Check Valve - BDK Double Dart ..................... 27 Check Valve - Double Flapper - with BDK Cartridge ...................................................... 31 Check Valve Double Dart ................................ 25 check-valve...................................................... 23 Circulation Sub - Dual...................................... 43 Clamp - Rod type............................................. 47 Clean out – Well-Vac....................................... 71 Cleaning Wellbore – Vortex Nozzle................ 33 cleaning wellbore............................................. 63 Clean-out - Tornado ........................................ 67 Cleanout Nozzle .............................................. 35 Comments form ............................................. 117 Concentric Tubing Surface Connector ............ 73 Connect (UCD) ............................................... 79 Connector - BDK Dimpleon ............................. 15 Connector - Concentric Tubing Surface .......... 73 Connector - Stiff Wireline........................... 87, 95 Connector - Surface Tubing .............................. 7 Connector - Tubing Grapple............................ 13 Connector - Tubing Roll-on ............................. 19

E Entry Sub........................................................115 F Filter Screen .....................................................11 Filter Sub - Downhole.........................................9 Flapper Check Valve........................................29 Flow Release Cable Head - Bakke ..................93 G gas lift mandrels - avoidance ...........................39 Grapple Connector...........................................13 Grapple Connector - Snake .............................49 H hanging up - avoidance....................................39 J Jet - Roto..........................................................63 Jet – Roto - Options .........................................65 K Kick-off Tool .....................................................39 L Latch - Snap .....................................................89 M mandrels - avoidance.......................................39 Moto-head - Bakke...........................................81

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 119

N Nozzle - Cleanout ............................................ 35 Nozzle - Vortex ................................................ 33 O Orientation Tool ............................................. 109 P Packer-Straddle............................................... 77 Parabow .......................................................... 83 Phase Separator - Downhole .......................... 69 Plug Catcher Sub ............................................ 59 Position - Kick-off Tool..................................... 39 Precision Displacement Dart ........................... 53 Pressure Bulkhead - BJ Wireline..................... 97 Pressure Bulkhead – Wireline - Bakke............ 99 Pressure controlled check-valve ..................... 23 R Release Cable Head – Bakke Flow................. 93 Release Tool ................................................... 91 Release Tool - Bakke. & Fishing Spear .......... 37 Release Tool - Tension Release ..................... 91 Release Tool & Fishing Spear......................... 37 removing deposits ........................................... 63 Reposition - Kick-off Tool ................................ 39 Rod Clamp....................................................... 47 Roll-on Connector............................................ 19 Roto-Jet ........................................................... 63 Roto-Jet - Options ........................................... 65 S Sand – Well-Vac.............................................. 71 Screen - Surface Filter..................................... 11 Separator - Downhole Phase Separation........ 69 Sequence Valve .............................................. 23 Side Entry Sub............................................... 115 Snake Grapple Connector ............................... 49

Snap Latch .......................................................89 Standard Threads ..............................................3 Steering Tool ..................................................107 Stiff Wireline Connector .............................87, 95 Straddle Packer................................................77 Straight Bar ......................................................45 Surface Connector - Concentric Tubing...........73 Surface Filter Screen .......................................11 Surface Tubing Connector .................................7 T Tension Release Tool ......................................91 Threads - Standard ............................................3 Tornado ............................................................67 Tubing Connector - Surface ...............................7 Tubing Grapple Connector...............................13 Tubing Roll-on Connector ................................19 Tubing Surface Connector ...............................73 U UCD - Universal Connect / Disconnect............79 Universal Connect / Disconnect (UCD)............79 User Comments .............................................117 V Vacuum Well – Well-Vac..................................71 Valve ................................................................29 Valve - BDK Double Dart Check Valve ............27 Valve - Double Dart Check Valve.....................25 Valve - Double Flapper Check - with BDK Cartridge.......................................................31 Valve - Sequence.............................................23 Vortex Nozzle ...................................................33 W Wellbore Cleaning – Vortex Nozzle .................33 Well-Vac ...........................................................71 Wireline Connector.....................................87, 95

F.O.B. BJ Services Tool Production, (see back of title page for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. Page 120 December 17 2001 BJ Coiled Tubing Tools Catalog

F.O.B. BJ Services Tool Production, (see page 2 for contact information) The latest version of this catalog is always available in Lotus NOTES under TIE \ Coiled Tubing Documents database. BJ Coiled Tubing Tools Catalog January 10, 2002 Page 121