CT00-000.814.36.01.02.pdf
Short Description
Download CT00-000.814.36.01.02.pdf...
Description
lz a W s n m ie S
SOMATOM Definition AS CT
Installation and Startup Hardcopy Cameras Hardcopy Camera Information with SOMARIS/7 VA27
© Siemens, 2010
10430603 07740769
© Siemens, 2010 All documents may only be used for rendering services on Siemens Healthcare Products. Any document in electronic form may be printed once. Copy and distribution of electronic documents and hardcopies is prohibited. Offenders will be liable for damages. All other rights are reserved.
Print No.: Replaces:
CT00-000.814.36.01.02 n.a.
English Doc. Gen. Date: 03.10 H WS CS SD SP/CV n.a.
2010
2
Copyright / Version / Disclaimer
1Copyright / Version / Disclaimer
Copyright “© Siemens, 2010“ refers to the copyright of a Siemens entity such as Siemens Aktiengesellschaft - Germany, Siemens Shenzhen Magnetic Resonance Ltd. - China, Siemens Shanghai Medical Equipment Ltd. - China, Siemens Medical Solutions USA Inc. - USA and/or Siemens Healthcare Diagnostics Inc. - USA. Document Version Siemens reserves the right to change its products and services at any time. In addition, manuals are subject to change without notice. The hardcopy documents correspond to the version at the time of system delivery and/or printout. Versions to hardcopy documentation are not automatically distributed. Please contact your local Siemens office to order current version or refer to our website http://www.healthcare.siemens.com. Disclaimer Siemens provides this documentation “as is“ without the assumption of any liability under any theory of law. The installation and service of equipment described herein requires superior understanding of our equipment and may only be performed by qualified personnel who are specially trained for such installation and/or service.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 2 of 246 H WS CS SD SP/CV
© Siemens, 2010
Table of Contents
3
0Table of Contents
1 _______ General Hardcopy Camera Information ______________________________ 7 HCC Information for SOMATOM Definition AS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Scope of applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Modality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Image quality and optical density check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General image quality information (LUT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Density verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference films . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Description of Correction LUT Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Additional and unnecessary LUT files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17 17 17 19 20 21
2 _______ Specific Camera Information - Agfa ________________________________ 23 Agfa Drystar AXYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / modality software configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / hardcopy camera configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23 23 24 26 29
Agfa Drystar 5503. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31 31 32 34 37
Agfa Drystar 5500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39 39 40 42 45
Agfa Drystar 5302. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47 47 48 50 53
Agfa Drystar 5300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
54 54 55 56 59
Agfa Drystar 3000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61 61 62 63 65
Agfa LR5200 / LR DICOM Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . .
66 66 67 69
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 3 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
4
Table of Contents Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
3 _______ Specific Camera Information - Codonics____________________________ 74 Codonics Horizon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
74 74 75 77 79
4 _______ Specific Camera Information - Fuji_________________________________ 81 Fuji Drypix 7000 / 5000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
81 81 82 84 87
Fuji Drypix 4000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
88 88 89 91 95
Fuji Drypix 3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . 98 Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Fuji Drypix 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
102 102 103 105 109
Fuji FM DPL/FN-PS551 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111 111 112 114 118
5 _______ Specific Camera Information - CARESTREAM ______________________ 120 CARESTREAM DryView 5850 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / modality software configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image quality and optical density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120 120 121 123 126
Kodak DryView 6800. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / modality software configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / hardcopy camera configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
128 128 129 131 134
Kodak DryView 5800. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 4 of 246 H WS CS SD SP/CV
© Siemens, 2010
Table of Contents
5
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / modality software configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / hardcopy camera configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
136 137 139 143
Kodak DryView 8900 (small border). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
145 145 146 148 150
Kodak DryView 8700-Plus / PACS Link MIM 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
151 151 152 153 157
Kodak DryView 8200 / PACS Link MIM 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
158 158 159 160 164
Kodak DryView 8100 / PACS Link MIM 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
165 165 166 167 171
Kodak DryView 8150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
173 173 174 175 178
6 _______ Specific Camera Information - Konica Minolta ______________________ 180 KONICA MINOLTA DryPro 873 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / modality software configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image quality and optical density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
180 180 181 183 188
Konica Minolta DryPro 832. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / modality software configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / hardcopy camera configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
190 190 191 193 198
Konica Minolta DryPro 793. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
200 200 201 203 206
Konica Minolta DryPro 771. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 5 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
6
Table of Contents SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . 210 Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 Konica DryPro 751/752 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
216 216 217 218 221
7 _______ Specific Camera Information Sony________________________________ 223 SONY UP-DF 750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / modality software configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image quality and optical density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
223 223 224 226 230
Sony UP-DF 550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / Modality Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / Hardcopy Camera Configuration (provided by OEM) . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
232 232 233 235 238
Sony UP-DF 500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCU / modality software configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCP / hardcopy camera configuration (provided by OEM) . . . . . . . . . . . . . . . . . . . Image Quality and Optical Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
240 240 241 242 244
8 _______ Changes to Previous Version ____________________________________ 245
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 6 of 246 H WS CS SD SP/CV
© Siemens, 2010
General Hardcopy Camera Information
7
1-
HCC Information for SOMATOM Definition AS
0
General information
0
1General Hardcopy Camera Information
Acronyms and abbreviations AE Title
Application entity title
BU
Business Unit (Modality)
DCS
DICOM Conformance Statement
DICOM
Digital Imaging and Communication in Medicine
HW/SW
Hardware/Software
HCC
Hardcopy Camera
LAN
Local Area Network
LUT
Lookup Table
OEM
Original Equipment Manufacturer
SCP
Service Class Provider
SCU
Service Class User
TCP/IP
Transfer Control Protocol/Internet Protocol
Block Diagram SOMATOM Definition
Fig. 1:
System references
• Refer to Siemens Medical Solutions Intranet, UPTIME Services
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 7 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
8
General Hardcopy Camera Information • Product-specific technical documentation Hardware components
• Ethernet switch ATI-FS708 (part no.: 30 79 332) • Cable, straight-through, S/UTP RJ45 (5m.; part no.: 30 74 515) • Cable, straight-through, S/UTP RJ45 (30 m.; part no.: 30 74 523) or
• Refer to Siemens Medical Solutions Intranet, UPTIME Services • Product-specific technical documentation Restrictions and known effects NOTE
Sending film sizes that are not available at the customer site may cause problems at the camera site. For this reason, it is recommended that you delete these film sizes for portrait and landscape formats.
NOTE
The Grayscale Standard Display Function (GSDF) is implemented for printing and imaging. No Presentation LUTs are available. For this reason, the DICOM Presentation LUT is not released.
NOTE
The use of the presentation LUT has to be disabled by local service for configuring LUT files.
NOTE
The density values for the image quality were measured with a calibrated densitometer X-Rite 301. The result of the measurement from other densitometers used may differ from the absolute density values as described in the tables.
NOTE
Print the 17 graystep test image to check the modality and camera adjustment according to the description. Verify the results using the reference values for max. density 2.80 listed in the table. This is also part of the acceptance test.
Errors and warning messages Only certain errors and warnings have been tested for each hardcopy camera. These errors and warnings are described in the corresponding camera information. .
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 8 of 246 H WS CS SD SP/CV
© Siemens, 2010
General Hardcopy Camera Information
9
Scope of applicability
0
Modality/system Device type
Modality (SCU) Product name SOMATOM Definition
Modality host name/console CT host name ICS (syngo Acquisition Workplace) IES (syngo CT Workplace; optional) IRS (Image Reconstruction System) Manufacturer Siemens Med CT SW revision Somaris 7 VA27 (syngo-based VE32E) Hardcopy Cameras This table includes all hardcopy cameras using DICOM basic print.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 9 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
10
General Hardcopy Camera Information Software validity Manufacturer
HCC name VA27
AGFA
Drystar AXYS
X
AGFA
Drystar 5503
X
AGFA
Drystar 5500
X
AGFA
Drystar 5302
X
AGFA
Drystar 5300
X
AGFA
Drystar 3000
X
AGFA
LR5200 / LR DICOM Controller
X
CODONICS
Horizon
X
FUJI
Drypix 7000/5000
X
FUJI
Drypix 4000
X
FUJI
Drypix 3000
X
FUJI
Drypix 2000
X
FUJI
FM DPL / FN-PS 551
X
CARESTREAM
DryView 5850
X
CARESTREAM [1]
DryView 6800
X
CARESTREAM [1]
DryView 5800
X
CARESTREAM [1]
DryView 8900 (small border)
X
CARESTREAM [1]
DryView 8700-Plus / PACS Link MIM 200
CARESTREAM [1]
DryView 8200 / PACS Link MIM 200
CARESTREAM [1]
DryView 8150
CARESTREAM [1]
DryView 8100 /
V....
X
X
X
KONICA MINOLTA
DryPro 873
X
KONICA MINOLTA
DryPro 832
X
KONICA MINOLTA
DryPro 793
X
KONICA MINOLTA
DryPro 771
X
KONICA
DryPro 751/752
X
SONY
UP-DF750
X
CT00-000.814.36.01.02 03.10
V....
X
PACS Link MIM 200
SOMATOM Definition AS
V...
Page 10 of 246 H WS CS SD SP/CV
© Siemens, 2010
General Hardcopy Camera Information
11 Software validity
Manufacturer
HCC name VA27
SONY
UP-DF550
X
SONY
UP-DF500
X
V...
V....
V....
[1] = formerly Kodak X = hardcopy camera is released N/A = hardcopy camera is not released
NOTE
The use of non-released hardcopy cameras in conjunction with BU products is prohibited and does not meet the requirements specified.
DICOM associations A DICOM association is a network connection between 2 DICOM applications. The association is established and released by the SCU and may be aborted by the SCU or SCP. The maximum number of associations for each HCC device is defined in the DCS. The maximum number of associations depends on the configuration and may be extended by increasing the number of gateways connected to the printer device. In a DICOM network environment, there are two ways to connect a modality (SCU) to an HCC device (SCP). Case 1: The association will always be opened. Assuming that this behavior applies to all modalities (connected to the same HCC device), the number of modalities has to be equal to or less than the maximum number of supported associations. Case 2: The association will be opened (and closed) on demand. Assuming that this behavior applies to all modalities (connected to the same HCC device), the number of modalities may be greater than the maximum number of supported associations. This number will be shared by the modalities. The association open-close behavior is unknown to other non-SIEMENS modalities. Under optimum circumstances, the number of modalities is equal to or less than the maximum number of supported associations. The association is always opened by the SCU (case 1) If the associations are always opened by the SCU for each configured HCC device, the association is reserved for this SCU only. If the maximum number of associations = 1, and another modality never releases the association, this HCC device is always reserved for this modality.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 11 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
12
General Hardcopy Camera Information The association is opened and closed on demand (case 2) The associations will be opened (and closed) on demand by the SCU for each configured HCC device via the product name. Special cases (compare also to case 1): If the number of modalities configured in the HCC device is greater than the maximum number of supported associations, some modalities will not be able to print. The printing function depends on the access time and release mechanism of each connected modality (e.g., the maximum number of supported associations = 1, the number of modalities = 2. During access by the first modality, access by the second modality is denied and connectivity fails, and vice versa). If other modalities do not release the associations, the shareable number of associations decreases.
Modality
0
Hardware and software prerequisites All hardware and software prerequisites are included in the product delivery volume. Parameters For software configuration, HCC data/parameters and possibly additional film matrix properties (syngo: filming properties) are required for software configuration. Modality data and configuration parameters Properties
Example
Supplier
Port number
104
Default entry
AE title
PR_”Hostname”
Default entry
TCP/IP address
xxx.x.x.xxx
Network administrator
HCC Data and Configuration Parameters1 1 The values for these parameters are part of the specific HCC information
Example: Kodak DryView 8300 Application Entity Properties AE Title Port number
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Display
Supplier
K8300
Network administrator or HCC service
5040
HCC Service
Page 12 of 246 H WS CS SD SP/CV
© Siemens, 2010
General Hardcopy Camera Information HC Device /
13
Display
General settings Type
Supplier
DICOM printer
Default entry
kodak8300
Default entry
DICOM Node
dv8300
Default entry
Filming properties
Display
Class (printer spec file name)
Supplier
Hold printed Film Jobs
10
Default entry
Min. density
20
Default entry
85.0 x 85.0
Default entry
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
8" x 10"
Portrait
[columns x rows]
2256 x 2676
Film Sheet Formats,
Number of Pixels
8" x 10"
Landscape
[columns x rows]
2736 x 2136
Medium type Film destination Color appearance Background Transformation
Default entry
Default entry
Blue film
Default entry
Processor
Default entry
Grayscale 8 bit
Default entry
Black
Default entry
No magnification
Default entry
Film matrix properties The settings for filming properties depend on the class selected (DICOM camera). A pull-down menu is provided for DICOM-class cameras. Select your DICOM camera type. A specific file for this type is loaded and the "filming properties" are shown. Changing the "filming properties" will affect the camera site and may not meet the requirements. Do not make any changes, unless otherwise instructed.
NOTE
Filming properties are "pixel size" and "media sheet size"; this information is required for image scaling and cannot be changed.
Software configuration
• The following information is required: - Host Name
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 13 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
14
General Hardcopy Camera Information - TCP/IP address - Application entity title - Port number of the DICOM remote host (DICOM laser camera) The AE title, port number and camera type have to be provided by the local camera service. syngo software configuration and laser camera 1. Select options in the menu line 2. Navigate to local service ¹ The Siemens Service Software Authentication platform is displayed 3. Enter the password and click ”OK” ¹ The Home Menu Platform of the syngo Service Software is displayed 4. Click ”Configuration” ¹ The Local Service Configuration List of system options is displayed 5. Click DICOM ”General” 6. Click ”>” ¹ The local Application Entity Title platform is displayed 7. Provide the Local Camera Service with the information in the field ”Print (SCU) AE Title PR_”Hostname” 8. Click ”Save”; ”>”; ”Finish” ¹ The Configuration Setup platform is displayed 9. Click Local Host ”TCP/IP LAN” ¹ The local Service Configuration TCP/IP LAN platform is displayed 10. Provide the Local Camera Service with the information in the ”IP address” field (scroll down menu for IP address but do not select it) 11. Click ”Finish” ¹ The Configuration Setup platform is displayed 12. Select DICOM Print Devices ¹ The Local Service Hardcopy Device platform is displayed 13. Enter the host name and TCP/IP address of the laser camera (provided by the camera manufacturer) 14. Click ”Test” to test IP communication (ping) 15. Click ”Save” ¹ Host properties successfully saved 16. Click ”OK” 17. Click ”>” ¹ The General Note Properties Dialog platform is displayed 18. Under logical name: Enter the logical name of the laser camera
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 14 of 246 H WS CS SD SP/CV
© Siemens, 2010
General Hardcopy Camera Information
15
19. Select the host and choose the previously defined host name in the hardcopy device platform 20. Under application entity properties: Enter the AE title in the edit AE title field (provided by the camera manufacturer) 21. Enter the Port Number (provided by the camera manufacturer) 22. Click ”Add” 23. Click ”Save” ¹ DICOM node properties successfully saved 24. Click ”OK” 25. Select the logical name again and click ”Verification” to test the DICOM communication (mc3echo) 26. Click ">" ¹ The camera-specific parameter platform is displayed. 27. HC device: Enter the camera name 28. General settings: /type: DICOM printer 29. /class: e.g., agfadrystar3000, or refer to specific HCC information 30. Filming properties: -
Hold printed film job, 10 = default; (max. = 10) (films can be printed again) Min. density 20 = default; (can be changed in increments of 1) Pixel size (changes not allowed) Film Sheet Formats Portrait (do not modify and/or add film sizes, select and delete film sizes that are not available at the customer site) Medium type, blue film = default; clear film; paper Film destination, processor = default; magazine Color appearance, monochrome = default; (select color for printers that support and use color media only, e.g., Drystar2000; Codonics) Background, black =default; white Transformation no magnification = default; do not change this value; except for Kodak DV8900; replicate; (do not change any other values under filming properties)
31. Click "Save" ¹ Caution: Please wait for the message "device properties successfully saved" 32. Click ”OK” 33. Click ”Finish” ¹ The Configuration Setup platform is displayed 34. Click ”>” to proceed and select the next marked DICOM ”HC Overview” 35. Click ”Finish” ¹ The Configuration Setup platform is displayed 36. Click LUT files ¹ The LUT platform is displayed.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 15 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
16
General Hardcopy Camera Information NOTE
If new LUT files for one or more modalities are available on a removable medium, e.g., floppy or CD, these files can be selected on the source drive and copied to the dependent LUT directories on the local host. Unnecessary LUT files can be removed from the LUT directories on the local host.
37. Click ">" ¹ Usage of Presentation LUT platform is displayed 38. Select disable 39. Modifications are necessary for additional image impressions only. NOTE
Only the topic CT image and SC image are relevant. Depending on the camera, specific entries have to be made. If nothing else is mentioned, set the CT image and SC image to "CTLUT" and "2.80" for maximum density. The entries for BU image and SC image have to be identical.
40. Overall maximum density: - 3.00 = default (depends on the max. possible value of the max. density of all image types) 41. Interpolation for printing: - Bilinear mode = default; #Smoothing Type - Replicate #Smoothing Type - Cubic 0, 2, 3, 4 = concerns cubic mode only 42. When changes are made, click "Save" 43. Click "Finish" 44. Click "Home"; the system automatically restarts the application NOTE
SOMATOM Definition AS
This may take some time. Confirm warnings with "OK."
CT00-000.814.36.01.02 03.10
Page 16 of 246 H WS CS SD SP/CV
© Siemens, 2010
General Hardcopy Camera Information
17
Image quality and optical density check
1.1
General image quality information (LUT)
0
Only standard LUT files are loaded. For importing/removing additional/unnecessary LUT files (see section ”Additional/unnecessary LUT files”) (LINK). The image data from the modality to the HCC is transformed/corrected by the LUTs, once in the modality and once in the HCC. As as result, the LUT has to be set on both sides:
• Refer to the Siemens Medical Solutions Intranet, UPTIME Services • Product-Specific Technical Documentation Correction LUT is selected Modality
HCC
Image Type
Correction LUT
Max. density
CT Image
CT LUT
2.80
SC Image
CT LUT
2.80
Refer to the specific Camera Information "DICOM printer settings". The HCC Service performs the setting "LINEAR LUT"
Density verification
0
There are two ways to check the LUT via the film density: The modality is configured to a specific correction LUT and the HCC is configured to linear curves. As an alternative, the modality is configured to a linear LUT and the HCC is configured to linear curves.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 17 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
18
General Hardcopy Camera Information Density verification for CT Verification for Check no.
CT Application
Modality adjustment Image Type
Correction LUT
Max.
Reference value
Density
Desired density CT Image
CT LUT
2.80
Refer to the table for CTLUT
HCC linearity
Linear
2.80
Refer to the table for linear LUT
1 CT Image
2
Since these two checks are equivalent; it is sufficient to check the “specified density”. Checking the “HCC linearity” may be necessary if the desired density verification (1) shows deviations and the HCC setting needs to be changed.
NOTE
Even if the HCC service does not require a test image of the modality for the HCC setting, it is easier to check this setting - and possibly further HCC corrections - with the HCC linearity verification (2) than with the desired density verification (1). Only the HCC linearity LUT is effective. A graphical display would now show the current HCC behavior only. This could be helpful for HCC Service.
Density values for CT
• Measure the density values in 17 gray levels in the IEC test image (Fig. 2 / p. 18) (for each film size). W:256; C:0;
Fig. 2:
SOMATOM Definition AS
Test image
CT00-000.814.36.01.02 03.10
Page 18 of 246 H WS CS SD SP/CV
© Siemens, 2010
General Hardcopy Camera Information CT LUT Step
19 Linear LUT
Ref. LUT
Maximum Density
Minimum Density
Ref. LUT
Maximum density
Minimum density
1
0.20
0.23
0.17
0.20
0.23
0.17
2
0.23
0.26
0.20
0.36
0.40
0.33
3
0.28
0.32
0.24
0.53
0.56
0.49
4
0.35
0.39
0.31
0.69
0.73
0.64
5
0.43
0.48
0.38
0.85
0.90
0.80
6
0.52
0.57
0.47
1.01
1.06
0.96
7
0.63
0.69
0.57
1.18
1.23
1.12
8
0.75
0.81
0.69
1.34
1.40
1.28
9
0.88
0.95
0.82
1.50
1.57
1.44
10
1.04
1.11
0.97
1.66
1.73
1.59
11
1.21
1.28
1.14
1.83
1.90
1.75
12
1.41
1.49
1.33
1.90
2.07
1.91
13
1.64
1.72
1.56
2.15
2.23
2.07
14
1.88
1.97
1.79
2.31
2.40
2.23
15
2.13
2.22
2.04
2.48
2.57
2.38
16
2.44
2.54
2.34
2.64
2.73
2.54
17
2.80
2.90
2.70
2.80
2.90
2.70
The density difference of the BU LUT (Ref. LUT) between steps 1, 2, and 3 has to be a minimum density value of 0.02. Test image 3 (SMPTE image) can be used for visual verification (the 95% gray square has to be visible).
Reference films
0
Reference film To create a reference film with the desired LUT adjustment, proceed as follows: 1. The layout is configurable under Option/Configuration/Filming layout 2. Use format 3.2; default center/width, for the film sheet
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 19 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
20
General Hardcopy Camera Information 3. Select the "Viewing" tab, select Patient Browser, navigate to the folder "CT Reference Images" and view the test images: Use test images (technical images) without text and the three CT Medical Ref images (cerebrum, pancreas, (LWS) lumbar spine) with text and print the film sheet. (the DICOM command to the printer is always "magnification none") 4. Measure IEC test image 1 (Fig. 2 / p. 18) and verify the CTLUT using the table "Density values for modality CT” Segment layout: 1
2
3
4
5
6
Segment
Image
Window
Center
1
IEC test image 1 (17 gray levels)
256
0
2
IEC test image 2 (50% gray field)
256
0
3
Test image 3 (SMPTE test pattern)
100
0
4
Pancreas (Abdomen)
520
104
5
Cerebrum (Head)
80
53
6
LWS (Spine)
440
56
5. Repeat this procedure with the linear LUT adjustment 6. If the reference images are not available, please load the reference images from H:\SITE_DATA\Reference-images\* in the storage device (import from offline)
Description of Correction LUT Files
0
Description of Correction LUT Files for CT Correction LUT
LUT files with Dmin. 0.2 and Dmax. 2.80
Linear
Linear LUT
CT LUT
Standard LUT; default for all cameras; adapts Dmin. of 0.2
CT02 vs. CT LUT
Dark area = less contrast; darker; softer; white area = more contrast
CT03 vs. CT02
Dark area = less contrast; darker; softer; white area = more contrast
CT04 vs. CT LUT
Dark area = more contrast; darker; sharper; white area: no changes
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 20 of 246 H WS CS SD SP/CV
© Siemens, 2010
General Hardcopy Camera Information Correction LUT
21
LUT files with Dmin. 0.2 and Dmax. 2.80
CT05 vs. CT LUT
Brighter; no changes in contrast for large window width; more contrast for head images (small window width)
CT06 vs. CT LUT
Brighter than CT5; white area = less contrast
cthead1
LUT for head images, images smoother
cthead2 vs. cthead1
Images smoother
CT015
Adapts Dmin of 0.15 (for cameras which are not supported Dmin. command)
CT017
Adapts Dmin. of 0.17 (for cameras which are not supported Dmin. command)
CT LUTdry
LUT for dry cameras; adapts Dmin. of 0.22 (5% visible in SMPTE test pattern)
CT Lung
LUT for lung images
Additional and unnecessary LUT files
0
If new, released LUT files are available on a removable medium (e.g., floppy or CD). These files may be selected on the source drive and copied to the dependent LUT directories on the local system. Unnecessary LUT files may be removed from LUT directories on the local system. Importing LUT files 1. In Local Service Configuration platform, select LUT files 2. Select the (source) drive and the path where the appropriate LUT files are located 3. Select the destination LUT directory (correction LUT directory) which depends on the image type (CTImage). 4. By pushing the copy button, the selected LUT file will be transferred to CTImage type. 5. Repeat this procedure using the appropriate LUT files for SC Images. 6. Select the destination LUT directory (correction LUT directory) which depends on the image type (SCImage). 7. Pushing the copy button transfers the selected LUT file to SCImage type. 8. Confirm the message "Files successfully copied" by clicking "OK" Removing LUT files Unnecessary LUT files can be removed from LUT directories on the local host by selecting the appropriate LUT file and clicking the "Remove" button.
• Click ">"
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 21 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
22
General Hardcopy Camera Information Real Size Scaling This procedure should be performed after system installation and when the Hardcopy Camera is ready to print. The real size behavior has to be performed with each connected Hardcopy Camera. Real size scaling verification 1. Load the test image (water image phantom) into the viewer (e.g. 20 cm water phantom, generated with the constancy procedure by CT). 2. Insert Crosshair (Viewing Card: Tools) and copy the image to the film sheet (“copy image to film sheet” button). 3. Select film sheet format 1 X 1. 4. Select "Original Image" in the filming card and print the image. 5. Use a calibrated ruler to measure the crosshairs of the printed image. ¹ The results should correspond to the printed value underneath the scale with a tolerance of ±1% in both directions. Refer to the specific camera information.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 22 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
23
2-
Agfa Drystar AXYS
0
General Information
0
2Specific Camera Information - Agfa
Block Diagram
Fig. 3:
Available Film Sizes Format
Release status
Film type
Medium type
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10” x 12”
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 10
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 23 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
24
Specific Camera Information - Agfa Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, 4x5 format, Copies=1, default center/width, magnification type none. The optimum connection (point to point) was used. Time
74 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
Slight inhomogeneity visible in gray field
NOTE
Typical slight line structure of the thermo head is visible in technical image.
NOTE
Two edges of the diagnostic area are cut (approx 1 mm) for 8x10, 10x12, 11x14,14x17.
NOTE
The background command does not work properly. The background is always white.
Known effects NOTE
European EMC Classification is Class A.
NOTE
The built in densitometer has to be set to X-Rite 301x to achieve the required image quality.
SCU / modality software configuration Application Entity Properties AE Title Port number
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
AXYS
Yes
104
No
Page 24 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa HC Device /
25
Display
Changes allowed
Type
DICOMprinter
No
Class
agfadrystar5503_AX YS
No
DICOM Node
DSAXYS
Yes
Filming properties
Display
Changes allowed
Hold printed film jobs
10
Yes
Min. density
20
Yes
50.0 x 50.0
No
General settings
(Printer spec file name)
Pixel Size [1/1000 mm] Film sheet formats,
Number of pixels
14" x 17"
Portrait
[columns x rows]
6922 x 8368 14" x 14" 6882 x 6882 11" x 14" 5376 x 6922 10" x 12" 4880 x 5860 8" x 10" 3852 x 4880
In “define new” Do not modify/add
Film sheet formats,
Number of pixels
14" x 17"
Select only
Landscape
[columns x rows]
8368 x 6922
Delete only
14" x 14" 6882 x 6882 11" x 14" 6922 x 5376 10" x 12" 5860 x 4880 8" x 10" 4880 x 3852 Medium type Film destination Color appearance
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Blue film
Yes
Processor
No
Gray scale 8 bit
No
Page 25 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
26
Specific Camera Information - Agfa Filming properties
Display
Changes allowed
Black
Yes
No magnification
No
Background Transformation NOTE
Do not modify or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / hardcopy camera configuration (provided by OEM)
0
Identification Device type:
DICOM printer
Device name:
DRYSTAR AXYS
Manufacturer:
AGFA
SW Revision:
R 1.60C1
Physical interface:
Ethernet 10/100 Base-Tx
Network protocol:
TCP/IP DICOM
DICOM conformance statement:
Document No.: 001150 Revision 1.0
Image memory:
65 GByte
Hard disk:
70 GByte
Printer Settings Selected
Variable name
Setting
n.a.
Nickname
n.a.
Use this profile only for incoming call- PR_hostname ing AE Title
n.a.
Use this profile only for local SCP server
DEFAULT_SCP
n.a.
Host profile type
GENERIC-GENERIC (customized)
No
Number of Copies
1
No
Print priority
Low
No
Polarity
Normal
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
CT hostname
Page 26 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa Selected
27
Variable name
Setting
No
Film orientation
Portrait
No
Trim
No
No
Film Size ID
(empty)
No
Medium type
(empty)
n.a.
Print even if Film Size ID / Medium Type is not supported
No
n.a.
Print even if Application Type is not supported
No
No
Initial memory size allocated per print 100 job (Mbytes):
No
Kernel
Site, Edit Custom: Interpolation type; Cubic high res. -smoothing factor -0.7
No
Magnification
Magn. none
No
Decimate/Crop behavior:
Disabled
No
Pixel Size ratio
1.0 / 1.0
No
Perception LUT
Linear
n.a.
Kanamori-like value
0
n.a.
Custom Value
empty
No
Illumination (cd/m)
2000
No
Reflected ambient light (cd/m2)
10
No
Border density (OD x 100)
Black
No
Empty image density (OD x 100)
Black
No
Minimum density
empty
No
Maximum density
Site 320
n.a.
Header annotation
Contents: Edit custom: None Courier 12
n.a.
Footer annotation
Contents: Edit custom: None Courier 12
n.a.
Window (%)
Empty
n.a.
Level (%)
Empty
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 27 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
28
Specific Camera Information - Agfa Selected
Variable name
Setting
n.a.
Image orientation
r0
n.a.
Conformance level
1
n.a.
N-event enabled
Off
n.a.
Mammo modality site
No
n.a.
Association time-out(s)
0
n.a.
Image time-out(s)
0
n.a.
ALLOW IMPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT BIG ENDIAN
Selected
n.a.
Resolution
508
n.a.
Supported SOP classes
Presentation LUT SOP class Print job SOP class Printer SOP class Basic annotation box SOP class Verification service class Basic film box SOP class Basic film session SOP class Basic color PM Meta SOP class Print Queue Management SOP INSTANCE Basic Grey Image Box SOP Class Basic color image box SOP class Basic gray PM Meta SOP class Print queue management SOP class
n.a.
LR like
off
Error / warning messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Top cover open
COVER OPEN
Tray open or front door open
BAD SUPPLY MGZ BADSUPPLY MGZ
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
COVER OPEN
Page 28 of 246 H WS CS SD SP/CV
Message displayed on SCU (*2) Camera cover, drawer or door open Problem with supply magazine
© Siemens, 2010
Specific Camera Information - Agfa Camera warning or error messages
29
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Send print job to PRINTER OFFLINE PRINTER OFFLINE Camera offline camera if the camera is in service mode Sent print job to cam- SUPPLY EMPTY era with empty input tray
SUPPLY EMPTY
Camera out of film
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
390.0
391.0
0.26
14" x 17"
X
410.0
411.0
0.24
Landscape
Y
320.0
320.0
0.00
14" x 14"
X
330.0
331.0
0.30
Portrait
Y
320.0
320.0
0.00
14" x 14"
X
330.0
330.0
0.00
Landscape
Y
330.0
331.0
0.30
11" x 14"
X
260.0
261.0
0.38
Portrait
Y
330.0
330.5
0.15
11" x 14"
X
330.0
330.0
0.00
Landscape
Y
250.0
251.0
0.40
10” x 12”
X
230.0
230.0
0.00
Portrait
Y
270.0
271.0
0.37
CT00-000.814.36.01.02 03.10
Page 29 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
30
Specific Camera Information - Agfa
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
280.0
280.5
0.18
Landscape
Y
220.0
220.0
0.00
8" x 10"
X
180.0
180.0
0.00
Portrait
Y
220.0
220.0
0.00
8" x 10"
X
230.0
230.0
0.00
Landscape
Y
170.0
170.0
0.00
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 30 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
31
Agfa Drystar 5503
2.1
General information
0
Block diagram
Fig. 4:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10” x 12”
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 10
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 31 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
32
Specific Camera Information - Agfa Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
70 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The background command does not work properly. The background is always white.
NOTE
All four edges of the diagnostic area are cut (approx 1 mm) for 8x10, 10x12, 11x14,14x17.
NOTE
Typical line structure of the thermo head is visible.
Known effects NOTE
European EMC Classification is Class A.
NOTE
The built in densitometer has to be set to X-Rite 301x to achieve the required image quality.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
DRY5503
Yes
104
No
Page 32 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa HC Device /
33
Display
Changes allowed
Type
DICOMprinter
No
Class
agfadrystar5503_AX YS
No
DRY5503
Yes
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
50.0 x 50.0
No
General settings
(Printer spec file name) DICOM Node
Filming properties
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
6922 x 8368 14" x 14" 6882 x 6882 11" x 14" 5376 x 6922 10" x 12" 4880 x 5860 8" x 10" 3852 x 4880
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
8368 x 6922
Delete only
14" x 14" 6882 x 6882 11" x 14" 6922 x 5376 10" x 12" 5860 x 4880 8" x 10" 4880 x 3852 Medium type Film destination Color appearance
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Blue film
Yes
Processor
No
Grayscale 8 bit
No
Page 33 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
34
Specific Camera Information - Agfa Filming properties
Display
Changes allowed
Black
Yes
No magnification
No
Background Transformation NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM printer
Device name:
DRYSTAR 5503
Manufacturer:
AGFA
SW Revision:
R 5.0.0 B2
Physical Interface:
Ethernet 10/100 Base-Tx
Network protocol:
TCP/IP DICOM
DICOM Conformance Statement:
AGFA Medical Imaging DICOM Conformance Statement, DrayStar 5503, SW version 5.0
Image memory:
2 * 256 Mbyte (RAM memory)
Hard disk:
min. 18 Gbyte
Printer settings Selected
Variable name
Setting
n.a.
Nickname
n.a.
Use this profile only for incoming call- PR_hostname ing AE Title
n.a.
Use this profile only for local SCP server
DEFAULT_SCP
n.a.
Host profile type
GENERIC-GENERIC (customized)
No
Number of Copies
1
No
Print priority
Low
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
CT hostname
Page 34 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa Selected
35
Variable name
Setting
No
Polarity
Normal
No
Film destination output tray
n.a.
n.a.
Tray 1
Selected
n.a.
Tray 2
Deselected
n.a.
Tray 3
Deselected
n.a.
Tray 4
Deselected
No
Film orientation
Portrait
No
Trim
No
No
Film Size ID
(empty)
No
Medium type
“empty”
n.a.
Print even if Film Size ID / Medium Type is not supported
No
n.a.
Print even if Application Type is not supported
No
No
Initially allocated memory size per print job (Mbytes):
100
No
Kernel
Site, Edit Custom: Interpolation type; Cubic high res. -smoothing factor -0.7
No
Magnification
Magn. none
No
Pixel Size ratio
1.0 / 1.0
No
Perception LUT
Linear
n.a.
Kanamori-like value
0
n.a.
Custom Value
“empty”
No
Illumination (cd/m)
2000
No
Reflected ambient light (cd/m2)
10
No
Border density (OD x 100)
Black
No
Empty image density (OD x 100)
Black
No
Minimum density
“empty”
No
Maximum density
Site 320
n.a.
Header annotation
Contents: Edit custom: None Courier 12
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 35 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
36
Specific Camera Information - Agfa Selected n.a.
Variable name
Setting
Footer annotation
Contents: Edit custom: None Courier 12
n.a.
Window (%)
“empty”
n.a.
Level (%)
“empty”
n.a.
Image orientation
r0
n.a.
Conformance level
1
n.a.
N-event enabled
Off
n.a.
Mammo
modality site, No
n.a.
Association time-out(s)
0
n.a.
Image time-out(s)
0
n.a.
ALLOW IMPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT BIG ENDIAN
Selected
n.a.
Resolution
508
n.a.
Supported abstract syntax
Presentation LUT SOP class Print job SOP class Printer SOP class Basic annotation box SOP class Verification service class Basic film box SOP class Basic film session SOP class Basic color PM Meta SOP class Print Queue Management SOP INSTANCE Basic Grey Image Box SOP Class Basic Color Image Box SOP Class Basic gray PM Meta SOP class Print queue management SOP class
n.a.
Early processing allowed
Yes
n.a.
LR like
off
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 36 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
37
Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Open front door
COVER OPEN
COVER OPEN
Tray open or front door open
BAD SUPPLY MGZ BADSUPPLY MGZ
Message displayed on SCU (*2) Camera cover, drawer or door open Problem with supply magazine
Sent print job to cam- SUPPLY EMPTY era with empty input tray
SUPPLY EMPTY
Camera out of film
Camera is warming up
PRINTER INIT
Camera initializing
PRINTER INIT
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
390.0
389.5
0.13
14" x 17"
X
410.0
409.5
0.12
Landscape
Y
330.0
330.0
0.00
14" x 14"
X
330.0
330.0
0.00
Portrait
Y
320.0
319.5
0.16
14" x 14"
X
330.0
329.5
0.15
Landscape
Y
330.0
330.0
0.00
11" x 14"
X
250.0
250.0
0.00
Portrait
Y
320.0
320.0
0.00
11" x 14"
X
330.0
330.0
0.00
Landscape
Y
250.0
250.0
0.00
CT00-000.814.36.01.02 03.10
Page 37 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
38
Specific Camera Information - Agfa
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
230.0
230.0
0.00
Portrait
Y
270.0
270.0
0.00
10” x 12”
X
280.0
280.0
0.00
Landscape
Y
230.0
230.0
0.00
8" x 10"
X
180.0
180.0
0.00
Portrait
Y
230.0
230.0
0.00
8" x 10"
X
230.0
230.0
0.00
Landscape
Y
170.0
170.0
0.00
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 38 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
39
Agfa Drystar 5500
2.2
General Information
0
Block Diagram
Fig. 5:
Available Film Sizes Format
Release status
Film type
Medium type
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10” x 12”
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 10
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 39 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
40
Specific Camera Information - Agfa Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, 4x5 format, Copies=1, default center/width, magnification type none. The optimum connection (point to point) was used. Time
69 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The background command does not work properly. The background is always white.
NOTE
All four edges of the diagnostic area are cut (approx 1 mm) for 8x10, 10x12, 11x14,14x17.
NOTE
Typical line structure of the thermo head is visible.
Known effects NOTE
The built in densitometer has to be set to X-Rite 301x to achieve the required image quality.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
HC Device / General settings Type
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
DRY5500
Yes
104
No
Display
Changes allowed
DICOM printer
No
Page 40 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa HC Device /
41 Display
Changes allowed
agfadrystar5500
No
DRY5500
Yes
Display
Changes allowed
Hold printed film jobs
10
Yes
Min. density
20
Yes
50.0 x 50.0
No
General settings Class (Printer spec file name) DICOM Node
Filming properties
Pixel Size [1/1000 mm] Film sheet formats,
Number of pixels
14" x 17"
Portrait
[columns x rows]
6922 x 8368 14" x 14" 6882 x 6882 11" x 14" 5376 x 6922 10" x 12" 4880 x 5860 8" x 10" 3852 x 4880
In “define new” Do not modify/add
Film sheet formats,
Number of pixels
14" x 17"
Select only
Landscape
[columns x rows]
8368 x 6922
Delete only
14" x 14" 6882 x 6882 11" x 14" 6922 x 5376 10" x 12" 5860 x 4880s 8" x 10" 4880 x 3852 Medium type Film destination Color appearance Background Transformation
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Blue film
Yes
Processor
No
Gray scale 8 bit
No
Black
Yes
No magnification
No
Page 41 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
42
Specific Camera Information - Agfa NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM printer
Device name:
DRYSTAR 5500
Manufacturer:
AGFA
SW Revision:
V3.0.0 C1
Physical interface:
Ethernet (RJ45)
Network protocol:
TCP/IP
DICOM conformance statement:
AGFA Medical Imaging DICOM Conformance Statement, DrayStar 5500, Document No.: 737
Image memory:
2 * 256 Mbyte
Hard disk:
18 GByte
Printer Settings Selected
Variable name
Setting
n.a.
Nickname
n.a.
Use this profile only for incoming call- PR_hostname ing AE Title
n.a.
Use this profile only for local SCP server
DEFAULT_SCP
n.a.
Host profile type
GENERIC-GENERIC (customized)
No
Number of Copies
1
No
Print priority
Low
No
Polarity
Normal
No
Film destination output tray
n.a.
n.a.
Tray 1
Selected
n.a.
Tray 2
Deselected
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
CT hostname
Page 42 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa Selected
43
Variable name
Setting
n.a.
Tray 3
Deselected
n.a.
Tray 4
Deselected
No
Film orientation
Portrait
No
Trim
No
No
Film Size ID
(empty)
No
Medium type
(empty)
n.a.
Print even if Film Size ID / Medium Type is not supported
No
n.a.
Print even if Application Type is not supported
No
No
Initial memory size allocated per print 100 job (Mbytes):
No
Kernel
Site, Edit Custom: Interpolation type; Cubic high res. -smoothing factor -0.7
No
Magnification
Magn. none
No
Pixel Size ratio
1.0 / 1.0
No
Perception LUT
Linear
n.a.
Kanamori-like value
0
n.a.
Custom Value
“empty”
No
Illumination (cd/m)
2000
No
Reflected ambient light (cd/m2)
10
No
Border density (OD x 100)
Black
No
Empty image density (OD x 100)
Black
No
Minimum density
“empty”
No
Maximum density
Site 320
n.a.
Header annotation
Contents: Edit custom: None Courier 12
n.a.
Footer annotation
Contents: Edit custom: None Courier 12
n.a.
© Siemens, 2010
Window (%)
CT00-000.814.36.01.02 03.10
Empty
Page 43 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
44
Specific Camera Information - Agfa Selected
Variable name
Setting
n.a.
Level (%)
Empty
n.a.
Image orientation
r0
n.a.
Conformance level
1
n.a.
N-event enabled
Off
n.a.
Mammo
modality site, No
n.a.
Association time-out(s)
0
n.a.
Image time-out(s)
0
n.a.
ALLOW IMPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT BIG ENDIAN
Selected
n.a.
Resolution
508
n.a.
Supported abstract syntax
Presentation LUT SOP class Print job SOP class Printer SOP class Basic annotation box SOP class Verification service class Basic film box SOP class Basic film session SOP class Basic color PM Meta SOP class Print Queue Management SOP INSTANCE Basic Grey Image Box SOP Class Basic Color Image Box SOP Class Basic gray PM Meta SOP class Print queue management SOP class
n.a.
Early processing allowed
Yes
n.a.
LR like
off
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 44 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
45
Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent print job to cam- COVER OPEN era with front door open Tray open or front door open
Sent by SCP COVER OPEN
BAD SUPPLY MGZ BADSUPPLY MGZ
Message displayed on SCU (*2) Camera cover, drawer or door open Problem with supply magazine
Sent print job to cam- SUPPLY EMPTY era with empty input tray
SUPPLY EMPTY
Camera out of film
Printer warming up
PRINTER INIT
Camera initializing
PRINTER INIT
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
400.0
399.0
0.25
14" x 17"
X
410.0
409.0
0.24
Landscape
Y
330.0
330.0
0.00
14" x 14"
X
330.0
329.5
0.15
Portrait
Y
330.0
330.0
0.00
14" x 14"
X
330.0
330.0
0.00
Landscape
Y
330.0
329.5
0.15
11" x 14"
X
250.0
249.5
0.20
Portrait
Y
330.0
330.0
0.00
11" x 14"
X
330.0
330.0
0.00
Landscape
Y
250.0
249.5
0.00
CT00-000.814.36.01.02 03.10
Page 45 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
46
Specific Camera Information - Agfa
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
230.0
230.0
0.00
Portrait
Y
270.0
269.5
0.19
10” x 12”
X
280.0
279.5
0.18
Landscape
Y
230.0
230.0
0.00
8" x 10"
X
180.0
179.5
0.28
Portrait
Y
230.0
230.0
0.00
8" x 10"
X
230.0
230.0
0.00
Landscape
Y
170.0
169.5
0.29
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 46 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
47
Agfa Drystar 5302
2.3
General information
0
Block diagram
Fig. 6:
Available film sizes Format
Release status
Film type
Medium type
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10” x 12”
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 11
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 47 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
48
Specific Camera Information - Agfa Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
67 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The background command does not work properly. The background is always white.
NOTE
If the film size was not included in the configuration of the camera, the connection to the camera is not available.
Known effects NOTE
The built in densitometer has to be set to X-Rite 301x to achieve the required image quality.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
HC Device / General settings Type Class (Printer spec. file name) DICOM Node
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
DRY5302
Yes
104
No
Display
Changes allowed
DICOMprinter
No
agfadrystar5302
No
Agfa5302
Yes
Page 48 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
49
Filming properties
Display
Changes allowed
Hold printed film jobs
10
Yes
Min. density
20
Yes
79.375 x 79.375
No
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4358 x 5232 14" x 14" 4358 x 4303 11" x 14" 3348 x 4358 10” x 12” 3070 x 3653 8" x 10" 2376 x 3070
In “Define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5232 x 4358
Delete only
14" x 14" 4303 x 4358 11" x 14" 4358 x 3348 10” x 12” 3653 x 3070 8" x 10" 3070 x 2376 Medium type Film destination Color appearance
Blue film
Yes
Processor
No
Gray scale 8 bit
No
Black
Yes
No magnification
No
Background Transformation
NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes that are not available at the customer site.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 49 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
50
Specific Camera Information - Agfa
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM printer
Device name:
DRYSTAR 5302
Manufacturer:
AGFA
SW Revision:
V1.80 c1
Physical Interface:
Ethernet (RJ45)
Network protocol:
TCP/IP
DICOM Conformance Statement:
Revision 1.1, June 2005
Image memory:
512 Mbyte (internal memory)
Hard disk:
35 GB
Printer settings Selected
Variable name
Setting
n.a.
Nickname
n.a.
Use this profile only for incoming "Calling AE PR_hostname Title":
n.a.
Use this profile only for local SCP server
DEFAULT_SCP
n.a.
Host Profile Type
GENERIC-GENERIC (customized)
No
Number of Copies
1
No
Print priority
Low
No
Polarity
Normal
No
Film orientation
Portrait
No
Trim
No
No
Film Size ID
Deselected
No
Medium type
Deselected
n.a.
Print even if Film Size ID / Medium Type is not supported
No
n.a.
Print even if Application Type is not supported:
No
No
Initial allocated memory size per print job (Mbytes):
100
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
CT hostname
Page 50 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa Selected No
51
Variable name
Setting
Kernel
SITE (*) Edit Custom: Interpolation type: Cubic high res. -smoothing factor -0.7
No
Magnification
Magn: Max. - custom scale factor 1.0
No
Pixel Size
Ratio: 1.0 / 1.0
No
Perception LUT
Linear
n.a.
Kanamori-like value
0
n.a.
Custom Value
Deselected
No
Illumination (cd/m2)
2000
No
Reflected ambient light (cd/m2)
10
No
Border density (OD x 100)
Black
No
Empty image density (OD x 100)
Black
No
Minimum density
Empty
No
Maximum density
Site 300
n.a.
Header annotation
Contents: Edit custom: None Courier 12
n.a.
Footer annotation
Contents: Edit custom: None Courier 12
n.a.
Window (%)
Empty
n.a.
Level (%)
Empty
n.a.
Image orientation
R0
n.a.
Conformance level
1
n.a.
N-event enabled
Off
n.a.
Mammo modality
Site, No.
n.a.
Association time-out(s)
0
n.a.
Image time-out(s)
0
n.a.
ALLOW IMPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT BIG ENDIAN
Selected
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 51 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
52
Specific Camera Information - Agfa Selected
Variable name
Setting
n.a.
Resolution
320
n.a.
Supported SOP classes:
Edit
n.a.
Supported abstract syntax
Presentation LUT SOP class Print job SOP class Printer SOP class Basic annotation box SOP class Verification service class Basic film box SOP class Basic film session SOP class Basic color PM Meta SOP class Print Queue Management SOP INSTANCE Basic Grey Image Box SOP Class Basic Color Image Box SOP Class Basic gray PM Meta SOP class Print queue management SOP class
n.a.
LR-like
Off
Error / Warning Messages (examples) Action that results in Printer messages camera error mesDefined DCS Sent by SCP (*2) sages (*1)
Message displayed on SCU
Top cover open
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
Open film supply tray
BAD SUPPLY MGZ
BAD SUPPLY MGZ
Problem with supply magazine
Empty input tray
SUPPLY EMPTY SUPPLY EMPTY
Camera out of film
Sent wrong film size
n.a.
Status -> aborted
n.a.
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 52 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa NOTE
53
If film size is not inserted in configuration of camera, connection to camera is not available.
Image Quality and Optical Density
0
No specific parameter available. Real size scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
390.0
391.0
0.26
14" x 17"
X
410.0
411.0
0.24
Landscape
Y
330.0
330.0
0.00
14" x 14"
X
330.0
331.0
0.30
Portrait
Y
330.0
330.0
0.00
14" x 14"
X
330.0
330.0
0.00
Landscape
Y
330.0
331.0
0.30
11" x 14"
X
250.0
250.5
0.20
Portrait
Y
330.0
330.0
0.00
11" x 14"
X
330.0
330.0
0.00
Landscape
Y
250.0
251.0
0.40
10” x 12”
X
230.0
230.0
0.00
Portrait
Y
270.0
271.0
0.37
10” x 12”
X
280.0
281.0
0.36
Landscape
Y
230.0
230.0
0.00
8" x 10"
X
170.0
170.5
0.29
Portrait
Y
230.0
230.0
0.00
8" x 10"
X
230.0
230.0
0.00
Landscape
Y
170.0
170.0
0.00
CT00-000.814.36.01.02 03.10
Page 53 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
54
Specific Camera Information - Agfa
Agfa Drystar 5300
2.4
General information
0
Block diagram
Fig. 7:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
n.a.
N/A
n.a.
Landscape
n.a.
N/A
n.a.
Portrait
Yes
DT2B
Blue-based
Landscape
Yes
DT2B
Blue-based
Portrait
n.a.
N/A
n.a.
Landscape
n.a.
N/A
n.a.
Portrait
n.a.
N/A
n.a.
Landscape
n.a.
N/A
n.a.
n.a.
N/A
n.a.
14" x 17"
14" x 14"
11" x 14"
10” x 12”
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 11
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 54 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
55
Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
67 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The background command does not work properly. The background is always white.
Known effects NOTE
The built in densitometer has to be set to X-Rite 301x to achieve the required image quality.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
HC Device /
0
Display
Changes allowed
DRY5300
Yes
104
No
Display
Changes allowed
DICOMprinter
No
agfadrystar5300
No
DICOM Node
DS5300
Yes
Filming properties
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
24
Yes
General settings Type Class (Printer spec file name)
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 55 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
56
Specific Camera Information - Agfa Filming properties Pixel Size [1/1000 mm]
Display
Changes allowed
79.375 x 79.375
No
Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4256 x 5174 11" x 14" 3300 x 4256
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5174 x 4256
Delete only
11" x 14" 4256 x 3300 Medium type
Blue film
Yes
Processor
No
Grayscale 8 bit
No
Black
Yes
No magnification
No
Film destination Color appearance Background Transformation NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM print server/printer
Device name:
DRYSTAR 5300
Manufacturer:
AGFA
SW Revision:
1.82 C1
Physical Interface:
10/100 Base - T
Network protocol:
TCP/IP
DICOM Conformance Statement:
Rev.1.2, October 24, 2005
Image memory:
512 Mbyte
Hard disk:
None
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 56 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
57
Printer settings Selected
Variable name
Setting
n.a.
Nickname
CT hostname
n.a.
Use this profile only for incoming “Calling AE title”
PR_hostname
n.a.
Use this profile only for local SCP server
All
n.a.
Host Profile Type
GENERIC-GENERIC (customized)
No
Number of Copies
1
No
Print priority
Low
No
Polarity
Normal
No
Film orientation
Portrait
No
Trim
No
No
Film Size ID
Deselected
No
Medium type
Deselected
n.a.
Print even if Film Size ID / Medium Type is not supported
No
No
Kernel
SITE Interpolation type: Cubic High Res Smooth Factor -2.5
No
Magnification
Magn: Max. - custom scale factor 1.0
No
Pixel Size
Ratio: 1.0 / 1.0
No
Perception LUT
Linear
No
Kanamori-like value
0
No
Custom Value
Deselected
No
Illumination (cd/m)
2000
No
Reflected ambient light (cd/m2)
10
No
Border density (OD x 100)
Black
No
Empty image density (OD x 100)
Black
No
Minimum density
Empty
No
Maximum density
Site 300
No.
Annotation 1
None
No
Annotation 2
None
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 57 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
58
Specific Camera Information - Agfa Selected
Variable name
Setting
n.a.
Window (%)
Empty
n.a.
Level (%)
Empty
n.a.
Image orientation
R0
n.a.
Conformance level
1
n.a.
N-event enabled
Off
n.a.
Mammo
Modality site: No.
n.a.
Association time-out(s)
0
n.a.
Image time-out(s)
0
n.a.
ALLOW IMPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT VR LITTLE ENDIAN
Selected
n.a.
ALLOW EXPLICIT BIG ENDIAN
Selected
n.a.
Resolution
320
n.a.
Supported SOP Classes
Presentation LUT SOP class Print job SOP class Printer SOP class Basic annotation box SOP class Verification service class Basic film box SOP class Basic film session SOP class Basic Color PM Meta SOP Class Print Queue Management SOP INSTANCE Basic Grey Image Box SOP Class Basic Color Image Box SOP Class Basic gray PM Meta SOP class Print queue management SOP class
n.a.
SOMATOM Definition AS
Initial allocated memory size per print 23 job (MBytes)
CT00-000.814.36.01.02 03.10
Page 58 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
59
Error / Warning Messages (examples) Action that results in camera error messages
Printer messages
Message displayed on SCU (*2)
Defined DCS (*1)
Sent by SCP
Open input tray
BAD SUPPLY MGZ
WARNING\BAD SUPPLY MGZ
Top cover open
COVER OPEN WARNING\COVER OPEN Camera info.: WARNING
Empty input tray
SUPPLY EMPTY
WARNING\SUPPLY EMPTY
Camera info.: WARNING
Camera info.: WARNING
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
400.0
401.0
0.25
14" x 17"
X
400.0
401.5
0.37
Landscape
Y
320.0
320.0
0.00
14" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
14" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
11" x 14"
X
250.0
250.5
0.20
Portrait
Y
320.0
320.0
0.00
11" x 14"
X
330.0
330.0
0.00
Landscape
Y
250.0
250.5
0.20
CT00-000.814.36.01.02 03.10
Page 59 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
60
Specific Camera Information - Agfa
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 60 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
61
Agfa Drystar 3000
2.5
General information
0
Block diagram
Fig. 8:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DT1B
Blue-based
Landscape
Yes
DT1B
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
No
No
No
Landscape
No
No
No
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10” x 12”
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 4
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 61 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
62
Specific Camera Information - Agfa Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
160 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The background command does not work properly. The background is always white.
Known effects NOTE
Changing the film size requires manual modifications at the camera site.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
HC Device /
0
Display
Changes allowed
DRY3000
Yes
104
No
Display
Changes allowed
DICOMprinter
No
agfadrystar3000
No
DRY3000
Yes
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
No
General settings Type Class (Printer spec file name) DICOM Node
Filming properties
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 62 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
63
Filming properties Pixel Size [1/1000 mm]
Display
Changes allowed
79.4 x 79.4
No
Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4224 x 4839 11" x 14" 3268 x 3924
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5142 x 3924
Delete only
11" x 14" 4224 x 2962 Medium type
Blue film
Yes
Processor
Yes
Grayscale 8 bit
No
Black
Yes
No magnification
No
Film destination Color appearance Background Transformation NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM printer
Device name:
DRYSTAR 3000
Manufacturer:
AGFA
SW Revision:
MeGa 3.32, cad 32948, ecu 32950, DI301p95, R1.95, aos 32947, dcm 32957, mps 32941, OEM 49535
Physical Interface:
10 base - TP Ethernet
Network protocol:
TCP/IP
DICOM Conformance Statement:
Rev.2.3, July 31, 2003
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 63 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
64
Specific Camera Information - Agfa Image memory:
32 Mbyte
Hard disk:
1.2 Gbyte
Printer settings File Name
Content
pms.ini
Remarks
PR_hostname
No .idf file defined
IDF=
PMS.IDF is the default
CFG=D:\MEDCOM2.PMS PMS.IDF
default STANDARD\1,1
Agfa layout ID: 14x17P ID1411 14x17L ID1511 14x14P ID1611 11x14P ID1211 11x14L ID1311 8x10P ID1011 8x10L ID1111
Medcom2.pms
00
is used (DCS), no *.idf file defined
pms_virgin_cfg 0
AGFA confirm Level is 0 (warnings)
n-event_enabled 0
Disable N-events messages
trim_flag 0
Disable trim around images
utl_id 1
LINEAR LUT
Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Switch camera from online to offline
PRINTER OFFLINE Association rejected
Connection to camera is not available
Open cover (lower)
SUPPLY EMPTY
SUPPLY EMPTY
Camera out of film
Top cover open
n.a.
CHECK PRINTER
Check camera
Supply magazine empty
SUPPLY EMPTY
SUPPLY EMPTY
Camera out of film
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 64 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
65
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
380.0
377.5
0.66
14" x 17"
X
400.0
397.0
0.75
Landscape
Y
300.0
300.0
0.00
14" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
14" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
11" x 14"
X
No
No
No
Portrait
Y
No
No
No
11" x 14"
X
No
No
No
Landscape
Y
No
No
No
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
CT00-000.814.36.01.02 03.10
Page 65 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
66
Specific Camera Information - Agfa
Agfa LR5200 / LR DICOM Controller
2.6
General information
0
Block diagram
Fig. 9:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
Scopix LT2B DLA1
Blue-based
Landscape
Yes
Scopix LT2B DLA1
Blue-based
Portrait
Yes
Scopix LT2B DLA1
Blue-based
Landscape
No
No
No
Portrait
Yes
Scopix LT2B DLA1
Blue-based
Landscape
Yes
Scopix LT2B DLA1
Blue-based
Portrait
n.a.
N/A
n.a.
Landscape
n.a.
N/A
n.a.
Portrait
Yes
Scopix LT2B DLA1
Blue-based
Landscape
Yes
Scopix LT2B DLA1
Blue-based
n.a.
N/A
n.a.
14" x 17"
14" x 14"
11" x 14"
10” x 12”
8" x 10"
Other
Released: Yes
SOMATOM Definition AS
- Film size is available and released
CT00-000.814.36.01.02 03.10
Page 66 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
67
Performance and Connections Associations Maximum number of associations supported: 15 Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
197 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
Known effects NOTE
For page mode magnification, set type "NONE" and activate the mark.
NOTE
The camera does support format 14”X14” landscape.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
LRDICOM
Yes
104
No
Page 67 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
68
Specific Camera Information - Agfa HC Device /
Display
Changes allowed
DICOMprinter
No
agfalr5200
No
DICOM Node
LR5200
Yes
Filming properties
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
80.0 x 80.0
No
General settings Type Class (Printer spec file name)
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4224 x 4839 14" x 14" 4224 x 3897 11" x 14" 3268 x 3924 8" x 10"
In “define new” Do not modify/add
2344 x 2647
Select only Delete only
Film Sheet Formats,
Number of Pixels
14" x 17"
Landscape
[columns x rows]
5140 x 3924 11" x 14" 4224 x 2962 8" x 10" 2948 x 2046
Medium type Film destination Color appearance Background Transformation
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Blue film
Yes
Processor
Yes
Grayscale 8 bit
No
Black
Yes
No magnification
No
Page 68 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa NOTE
69
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM print server/printer
Device name:
Agfa LR DICOM Controller
Manufacturer:
AGFA
SW Revision:
FLC1.01.14
Physical Interface:
Gateway
Network protocol:
TCP/IP
DICOM Conformance Statement:
Rev. 1.2, July 31, 2003
Image memory:
128 MB RAM
Hard disk:
20 Gbyte
Device type:
DICOM camera
Device name:
LR 5200
Manufacturer:
AGFA
SW Revision:
LTP 01806.240698
Physical Interface:
FOI optic
Network protocol:
None
DICOM Conformance Statement:
None
Image memory:
n.a.
Hard disk:
None
Printer settings Selected
Variable name
Setting
n.a.
Calling AE title
PR_Hostname
n.a.
Nickname
CT hostname
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 69 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
70
Specific Camera Information - Agfa Selected
Variable name
Setting
n.a.
Host profile type
GENERIC-GENERIC (customized)
No
Number of Copies
1
No
Print priority
Low
No
Polarity
Normal
No
Film orientation
Portrait
No
Trim
No
No
Film Size ID
Deselected
No
Medium type
Deselected
n.a.
Print even if Film Size ID / No Medium Type is not supported
No
Kernel
Site Magnification type: cubicHighRes Smooth Factor: - 0.7
Yes
Magnification
Type: None Max Custom scale factor: 1.0
No
Pixel Size
Ratio: 1.0 / 1.0
No
Perception LUT
Linear
No
Kanamori-like value
0
No
Custom Value
Deselected
No
Illumination (cd/m)
2000
No
Reflected ambient light (cd/m2)
10
No
Border density (OD x 100)
Black
No
Empty image density (OD x 100)
Black
No
Minimum density
Empty
No
Maximum density
Site 320
n.a.
Header annotation
No
Content:
Edit custom: none Courier 12
n.a.
Footer annotation
No
Content:
Edit custom: none Courier 12
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 70 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa Selected
Variable name
71 Setting
n.a.
Window (%)
Empty
n.a.
Level (%)
Empty
n.a.
Image orientation
r0
n.a.
Conformance level
1
n.a.
N-event enabled
Off
n.a.
Mammo
Site no.
n.a.
Association time-out(s)
0
n.a.
Image time-out(s)
0
n.a.
ALLOW IMPLICIT VR LITTLE Yes ENDIAN
n.a.
ALLOW EXPLICIT VR LITTLE ENDIAN
Yes
n.a.
ALLOW EXPLICIT BIG ENDIAN
Yes
n.a.
Resolution
315
n.a.
Supported abstract syntax
Basic Film Box_SOP_Class Basic gray PM Meta_SOP_Class Print Queue Management_SOP_INSTANCE Printer_SOP_Class Basic Color Image Box_SOP_CLass Basic Grey Image_Box_SOP_Class Basic Film Session_SOP_Class Print Job_SOP_Class Presentation LUT_SOP_Class Basic Annotation Bo_ SOP_Class Verification service class Print Queue Management_SOP_Class
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 71 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
72
Specific Camera Information - Agfa Error / Warning Messages (examples) Action that results in Printer messages camera error mesDefined DCS (*1) Sent by SCP sages Camera switched off or PRINTER OFFLINE Camera switched to
Message displayed on SCU (*2)
PRINTER OFFLINE
Camera offline
offline Camera start-up
PRINTER INIT
PRINTER INIT
Camera initializing
Manual input of film in developer
CHECK PRINTER
CHECK PRINTER
Check camera
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
331.5
0.45
Portrait
Y
370.0
373.0
0.81
14" x 17"
X
400.0
403.0
0.75
Landscape
Y
300.0
301.5
0.50
14" x 14"
X
330.0
331.0
0.30
Portrait
Y
330.0
332.5
0.76
14" x 14"
X
No
No
No
Landscape
Y
No
No
No
11" x 14"
X
250.0
252.0
0.80
Portrait
Y
300.0
301.0
0.33
11" x 14"
X
330.0
331.0
0.30
Landscape
Y
220.0
221.5
0.68
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 72 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Agfa
Film size / Direction
© Siemens, 2010
73
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
170.0
170.0
0.00
Portrait
Y
200.0
201.5
0.75
8" x 10"
X
230.0
231.5
0.65
Landscape
Y
160.0
160.5
0.31
CT00-000.814.36.01.02 03.10
Page 73 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
74
Specific Camera Information - Codonics 3-
Codonics Horizon
0
General information
0
3Specific Camera Information - Codonics
Block diagram
Fig. 10:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DirectVista
Landscape
Yes
DirectVista
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
No
No
No
Landscape
No
No
No
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
Yes
DirectVista
Landscape
Yes
DirectVista
n.a.
n.a.
Grayscale Blue-based
14" x 17" Grayscale Blue-based
14" x 14"
11" x 14"
10" x 12" Grayscale Blue-based
8" x 10"
Other
Released: Yes
SOMATOM Definition AS
Grayscale Blue-based n.a.
- Film size is available and released
CT00-000.814.36.01.02 03.10
Page 74 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Codonics Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
75
Performance and Connections Associations Maximum number of associations supported: More than 30 Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
95 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The background command does not work properly. The background is always white.
NOTE
Film size 8” x 10” is not released for subdivision 1x1 with linear LUT. Film size 8” x 10” is not released also for subdivisions smaller than 6 on 1 (4 on 1; 2 on 1; etc) with CT LUT.
NOTE
Print-outs on paper are not released.
Known Effects /a
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
HORIZON
Yes
104
No
Page 75 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
76
Specific Camera Information - Codonics HC Device /
Display
Changes allowed
DICOM printer
No
codonicshorizon
No
DICOM Node
Horizon
Yes
Filming properties
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
79.4 x 79.4
No
General settings Type Class (Printer spec file name)
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4322 x 5025 11" x 14" 3382 x 4022 8" x 10" 2406 x 2790
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5025 x 4322
Delete only
11" x 14" 4022 x 3382 8" x 10" 2790 x 2406 Medium type Film destination Color appearance
Blue film
Yes
Processor
Yes
Grayscale 8 bit
No
Black
No
No magnification
No
Background Transformation
NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 76 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Codonics
77
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Manufacturer / device type:
DICOM Printer (SCP) Device name: Horizon
Manufacturer: Codonics SW Revision: V 1.9.0 Physical type: Ethernet 10/100 base T/Tx Network protocol: TCP/IP DICOM Conformance Statement: D.C.S., V1.9.0 Image memory: 256 MB RAM, 6 GB-HD Hard disk: 10 GB Printer settings Content: DV FILM BLUE
© Siemens, 2010
Gamma:
1.0
Contrast:
0
Dmax:
300
Dmin:
0
Film View:
Front
Illumination:
2000
Reflected Light:
10
LUT:
linear
Polarity:
Positive
Background:
Black
Scaling:
Bilinear
Rotate:
Auto
Image Warnings:
On
Captions:
Off
Border Fill:
On
Crop Anchor:
Center
Scale Factor:
0.0
Coverage:
Standard
CT00-000.814.36.01.02 03.10
Page 77 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
78
Specific Camera Information - Codonics Content: Step in Service Mode (with " SHARP -> Edge Detection
1:On
Adjustment Parameter -> SHARP -> Detection level
600
Adjustment Parameter -> SHARP -> Sharpness
130
Adjustment Parameter -> SHARP -> Character Color
0:White
Adjustment Parameter -> MEDIUM -> Edge Detection
1:On
Adjustment Parameter -> MEDIUM -> Detection level
600
Adjustment Parameter -> MEDIUM -> Sharpness
80
Adjustment Parameter -> MEDIUM -> Character Color
0:White
Adjustment Parameter -> SMOOTH -> Edge Detection
1:On
Adjustment Parameter -> SMOOTH -> Detection level
800
Adjustment Parameter -> SMOOTH -> Sharpness
30
Adjustment Parameter -> SMOOTH -> Character Color
0:White
Default Requested Decimate / Crop Behavior
1:DECIMATE
Magnification Type
2:modality
Requested Image Size (0=None)
0
Requested Image Size (0=None) ' Default Requested 1:modality Image Size
LUT:
SOMATOM Definition AS
Procedure
0:SAR
Default LUT
1
Default LUT -> Configuration Information (Default LUT#)
0:printer
Adjustment Parameter -> LUT1 -> r table number
17
Adjustment Parameter -> LUT1 -> Max. Density
300
Adjustment Parameter -> LUT1 -> Min. Density
20
Adjustment Parameter -> LUT1 ->
100
CT00-000.814.36.01.02 03.10
Page 92 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
93
File Name Content / Remarks
Output format:
© Siemens, 2010
Fuji printer
PR_hostname
Adjustment Parameter -> LUT1 -> Number of tuning points
0
Dmax 3.6
0:Standard
Illumination
2000
Illumination -> Default Illumination
1:modality
Reflective Ambient Light
10
Reflective Ambient Light -> Default Ambient Light
1:modality
Border density
280
Border density -> Default border density
1:modality
Polarity (Pos./Neg.)
1:normal (Pos.)
Trim density
0
Trim
0:Off
Trim Width
1
Number of Copies
1
Number of Copies -> Default Number of Copies
1:modality
Margin between images
20
Image layout
0:Concentration
Default film size
1:modality
Default Film Size -> Film Size
4: 14 IN X 17 IN
Default Medium Type
0:printer
Default Medium Type -> Medium Type (base color)
1: blue
Film orientation
3:modality
Mirror
0:OFF (Normal)
Processing Type
0:Standard
Print priority
1:HIGH
Resolution
0:Standard
Default film destination
0:printer
Processsor
1: use
CT00-000.814.36.01.02 03.10
Page 93 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
94
Specific Camera Information - Fuji File Name Content / Remarks
Annotation
Fuji printer
PR_hostname
Bin No 1
0: not use
Bin No 2
0: not use
Bin No 3
0: not used
Bin No 4
0: not used
Annotation Height
5:modality
Annotation Font
System:System
Annotation Size
14:14
Upper Left
(empty)
Upper Center
(empty)
Upper Right
(empty)
Lower Left
(empty)
Lower Center
(empty)
Lower Right
(empty)
Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP (*2)
Message displayed on SCU
Camera in utility mode
PRINTER OFFLINE PRINTER OFFLINE Camera offline
Camera in service mode (M-utility mode)
TCP/IP INIT ERROR
TCP/IP INIT ERROR
Connection to camera is not available
Front door open
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
Supply magazine empty
SUPPLY EMPTY
SUPPLY EMPTY
Camera out of film
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 94 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
95
Image Quality and Optical Density
0
No specific parameter available. Real size scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
332.0
0.61
Portrait
Y
400.0
402.5
0.63
14" x 17"
X
410.0
413.0
0.73
Landscape
Y
330.0
332.5
0.61
14" x 14"
X
330.0
332.5
0.76
Portrait
Y
330.0
332.5
0.76
14" x 14"
X
330.0
332.0
0.61
Landscape
Y
330.0
332.5
0.76
11" x 14"
X
230.0
232.0
0.87
Portrait
Y
340.0
342.0
0.59
11" x 14"
X
350.0
351.5
0.43
Landscape
Y
230.0
232.0
0.87
10” x 12”
X
230.0
232.0
0.87
Portrait
Y
280.0
281.5
0.54
10” x 12”
X
290.0
291.5
0.52
Landscape
Y
230.0
232.0
0.87
8" x 10"
X
190.0
191.0
0.53
Portrait
Y
230.0
232.0
0.87
8" x 10"
X
230.0
232.0
0.87
Landscape
Y
170.0
171.0
0.59
CT00-000.814.36.01.02 03.10
Page 95 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
96
Specific Camera Information - Fuji
Fuji Drypix 3000
4.2
General information
0
Block diagram
Fig. 13:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DI-AT
Blue-based
Landscape
Yes
DI-AT
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 6
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 96 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
97
Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
150 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
Additional annotation and trim have been switched off.
NOTE
The background command does not work properly. The background is always white.
Known Effects NOTE
The DI-AT film type requires a specific densitometer characteristic. Density measurements using the X-Rite 301 densitometer are only possible if the FUJI/X-Rite color compensating filter kit CM500 is installed on the X-Rite 301 and calibrated as described in the X-Rite letter.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
HC Device / General settings Type Class (Printer spec file name) DICOM Node
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
DRYPIX3000
Yes
104
No
Display
Changes allowed
DICOMprinter
No
fujidrypix3000
No
drypix3000
Yes
Page 97 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
98
Specific Camera Information - Fuji Filming properties
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
84.7 x 84.7
No
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4072 x 4891
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
4972 x 3993
Delete only
Medium type Film destination Color appearance
NOTE
Do not modify/add
Blue film
Yes
Processor
No
Grayscale 8 bit
No
Black
Yes
No magnification
No
Background Transformation
In “define new”
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type: DICOM Printer (SCP) Device name: Drypix 3000 Manufacturer: FUJI SW Revision: A03 Main Unit / A04 LAN Board Physical type: 100Base-Tx /10 Base T Network protocol: TCP/IP DICOM Conformance Statement: 1st Edition March 31, 2001. Image memory: Approx. 56 MB Hard disk: None
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 98 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
99
Printer settings File Name None
Content FUJI PRINTER
Remarks Provided by FUJI
Function Properties Protocol information Protocol = DICOM Normal AE title = DRYPIX 3000 Role = SCP Port no. = 104 Data transfer time-out = 300 Annotation Annotation size = 1:half Association count 6 Logging DICOM 0 : None Log Auto Save 0 : No Default client 0 : No Printer Model = DRYPIX Manufacturer = FUJI PHOTO FILM CO, LTD CT hostname
None
Protocol: Attribute list error (0107H warning) = indicate Attribute value out of range (0116H warning) = indicate Image size larger than image box (B604H warning) = 1: Indicate N-Event-Report-RQ = 0 disable Change film size = 0: 0116H ()W Use system time-out = 1: Yes Use extension format Use default annotation = 1: No Magnify: Procedure = 1:SSM Default smoothing type = 1:SHARP LUT: Procedure = 0: SAR Default LUT = 1 r table no. = 17 Max. density = 300 Min. density = 0
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 99 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
100
Specific Camera Information - Fuji File Name None
Content FUJI PRINTER
Remarks Provided by FUJI
Output format: Border density = 300 Polarity (Pos/Neg) = 1 : normal(Pos.) Trim density = 0 Trim = 0: Off Trim with = 1 Number of copies = 1 Margin between images = 20 Image layout = 0: Concentration Film size = 1: 35x43 (14 in. x17 in.) Medium type (base color) = 1 blue Film orientation = 1: PORTRAIT Mirror = 0: OFF(Normal) Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Message displayed on SCU (*2)
Sent by SCP
Top cover open
n/a
UNKNOWN
Unspecified problem with camera.
Remove tray
n/a
UNKNOWN
Unspecified problem with camera.
Supply magazine empty
n.a.
SUPPLY EMPTY
Camera out of film
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 100 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
101
Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
400.0
398.0
0.50
14" x 17"
X
410.0
408.5
0.37
Landscape
Y
320.0
320.0
0.00
14" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
14" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
11" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
11" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
CT00-000.814.36.01.02 03.10
Page 101 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
102
Specific Camera Information - Fuji
Fuji Drypix 2000
4.3
General Information
0
Block Diagram
Fig. 14:
Available Film Sizes Format
Release status
Film type
Medium type
Portrait
Yes
DI-HT
Blue-based
Landscape
Yes
DI-HT
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
Yes
DI-HT
Blue-based
Landscape
Yes
DI-HT
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
Yes
DI-HT
Blue-based
Landscape
Yes
DI-HT
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 11
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 102 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
103
Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, 4x5 format, Copies=1, default center/width, magnification type none. The optimum connection (point to point) was used. Time
118 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
Test of line structure and artifacts not passed. Small horizontal and vertical line structure visible in technical images and for all film sizes.
Known Effects NOTE
Electro Magnetic Compatibility(EN55011, CISPR 11) classification is not available. An installation is suggested only for Industrial Areas (Hospital).
NOTE
The measured values of the X-Rite 301 Densitometer must be translated via the Fuji Conversion Table (Operating Manual).
NOTE
Sporadic transportation problems with film size 8x10 and 11x14. Install magazine at the top side to prevent this problem.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
DP2000
Yes
104
No
Page 103 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
104
Specific Camera Information - Fuji HC Device /
Display
Changes allowed
DICOMprinter
No
fujidrypix2000
No
DRY2000
Yes
Display
Changes allowed
Hold printed film jobs
10
Yes
Min. density
20
Yes
84.7 x 84.7
No
General settings Type Class (Printer spec. file name) DICOM Node
Filming properties
Pixel Size [1/1000 mm] Film sheet formats,
Number of pixels
14" x 17"
Portrait
[columns x rows]
4107 x 4858 11" x 14" 2938 x 4094 8" x 10" 2280 x 2812
In “Define new” Do not modify/add
Film sheet formats,
Number of pixels
14" x 17"
Select only
Landscape
[columns x rows]
4932 x 4016
Delete only
11" x 14" 4188 x 2872 8" x 10" 2876 x 2215 Medium type Film destination Color appearance
Blue film
Yes
Processor
No
Gray scale 8 bit
No
Black
Yes
No magnification
No
Background Transformation
NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes that are not available at the customer site.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 104 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
105
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type: DICOM Printer (SCP) Device name: Drypix 2000 Manufacturer: FUJI SW Revision: V2.0 Physical type: Ethernet 10/100 Base T/Tx Network protocol: TCP/IP DICOM conformance statement: 1st Edition, June 2006 Image memory: 256 MB RAM Hard disk: None Printer Settings Fuji printer Protocol:
Content
Attribute List Error (0107H warning)
Indicate
N-event report RQ
Disabled
Attribute Value Out of Range (0116H warning)
Indicate
Image size is larger than image box (B604H warning)
Indicate
Change film size
272:0110H[F]
Use System Timeout
Yes
Presentation LUT
No
Precede picking up
No
Use max/min density
Modality
Use extension format --> ID
SM
Use extension format--> Use Default Annotation
No
Change base color (disable:110H[F])
Enable
Define Film Size of 11" x 14''
25.7 x 36.4 cm
AE Title
PR_hostname
Default Smoothing Type
sharp
Default requested decimate / crop behavior
decimate
Magnify:
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 105 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
106
Specific Camera Information - Fuji Fuji printer
Content
Magnification Type
cubic
Requested image size (0=None)
0
Default Magnification Type
Modality
Default Smoothing Type
Modality
Default Requested Image Size (0=None)
Modality
Default requested decimate / crop behavior
Modality
AE Title
PR_hostname
Procedure
AV-R
SHARP -> Edge Detection
On
SHARP -> Detection level
600
SHARP -> Sharpness
130
SHARP -> Character Color
White
SMOOTH -> Edge Detection
On
SMOOTH -> Detection level
800
SMOOTH -> Sharpness
30
SMOOTH -> Character Color
White
MEDIUM -> Edge Detection
On
MEDIUM -> Detection level
600
MEDIUM -> Sharpness
80
MEDIUM -> Character Color
White
Default LUT
1
Illumination
2000
Ambient light
10
LUT Common:
Default LUT -> Configuration Information (Default LUT#) printer
SOMATOM Definition AS
Default Illumination
Modality
Default Ambient Light
Modality
AE Title
PR_hostname
Procedure
SAR
LUT1 -> Max. Density
280
CT00-000.814.36.01.02 03.10
Page 106 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji Fuji printer
107 Content
LUT1 -> Min. Density
18
AE Title
PR_hostname
LUT1 -> r table number
17
LUT1 -> Contrast
100
Number of tuning points
0
P1_Density
120
P2_Density
120
P3_Density
120
P4_Density
120
P5_Density
120
P1_Shift
0
P2_Shift
0
P3_Shift
0
P4_Shift
0
P5_Shift
0
P1_Contrast
100
P2_Contrast
100
P3_Contrast
100
P4_Contrast
100
P5_Contrast
100
AE Title
PR_hostname
Film Size
14INx17IN
Medium type
blue
Film orientation
portrait
Border density
280
Polarity (Pos./Neg.)
normal(Pos.)
Trim
Off
Trim Width
1
Trim density
0
Output format:
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 107 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
108
Specific Camera Information - Fuji Fuji printer
Content
Number of Copies
1
Print priority
high
Default Number of Copies
Modality
Default Print Priority
Printer
Default Medium Type
Printer
Default Film Orientation
Modality
Default Film Size
Modality
Default Border Density
Printer
Default Trim
printer
Default Polarity
Modality
AE Title
PR_hostname
Mirror
OFF(Normal)
Margin between images
20
Image layout
Concentration
Processing Type
2
Image Crop UPDWN Area (8x10) for CR Image
both
Image Crop Side Area (8x10) for CR Image
both
Image Crop UPDWN Area (10x14) for CR Image
both
Image Crop Side Area (10x14) for CR Image
both
Image Crop UPDWN Area (14x17) for CR Image
both
Image Crop UPDWN Area (10x12) for CR Image
both
Image Crop Side Area (10x12) for CR Image
both
Annotation
SOMATOM Definition AS
Upper left
empty
Upper center
empty
Upper right
empty
Lower left
empty
Lower center
empty
Lower right
empty
CT00-000.814.36.01.02 03.10
Page 108 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
109
Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP (*2)
Message displayed on SCU
Top cover open
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
Remove Tray
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
Supply empty
SUPPLY EMPTY
SUPPLY EMPTY
Camera out of film
Film jam
FILM JAM
FILM JAM
Film jam
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available. Real size scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
400.0
398.0
0.50
14" x 17"
X
410.0
407.5
0.61
Landscape
Y
330.0
330.0
0.00
14" x 14"
X
n/a
n/a
n/a
Portrait
Y
n/a
n/a
n/a
14" x 14"
X
n/a
n/a
n/a
Landscape
Y
n/a
n/a
n/a
11" x 14"
X
230.0
229.5
0.22
Portrait
Y
340.0
340.0
0.00
11" x 14"
X
350.0
350.0
0.00
Landscape
Y
230.0
229.5
0.22
CT00-000.814.36.01.02 03.10
Page 109 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
110
Specific Camera Information - Fuji
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
n/a
n/a
n/a
Portrait
Y
n/a
n/a
n/a
10” x 12”
X
n/a
n/a
n/a
Landscape
Y
n/a
n/a
n/a
8" x 10"
X
190.0
189.5
0.26
Portrait
Y
230.0
230.0
0.00
8" x 10"
X
230.0
230.0
0.00
Landscape
Y
170.0
170.0
0.00
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 110 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
111
Fuji FM DPL/FN-PS551
4.4
General information
0
Block diagram
Fig. 15:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DI-AL
Blue-based
Landscape
Yes
DI-AL
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
Yes
DI-AL
Blue-based
Landscape
Yes
DI-AL
Blue-based
Portrait
Yes
DI-AL
Blue-based
Landscape
Yes
DI-AL
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 6
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 111 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
112
Specific Camera Information - Fuji Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
158 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
2 cameras (each with a separate channel) can be connected to PS551. Only one camera connection to FN-PS551 was used for the qualification.
Known Effects NOTE
The European Standard EN55011 is supported only with Class A (Hospital use).
NOTE
In a multi-modality environment one additional hardware channel must be installed at FM-DPL and a second print server PS551 has to be connected for Mammography Modalities.
NOTE
When the Laser Imager connected to the print server is in the offline status being disabled to receive image data, FAILURE will be returned.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
FMDPL
Yes
104
No
Page 112 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
113
HC Device /
Display
Changes allowed
DICOMprinter
No
fujifmdpl
No
DICOM Node
FMDPL
Yes
Filming properties
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
100 x 100
No
General settings Type Class (Printer spec file name)
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
3500 x 4170 11" x 14" 2538 x 3522 8" x 10" 1952 x 2410
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
4240 x 3442
Delete only
11" x 14" 3600 x 2460 8" x 10" 2464 x 1898 Medium type Film destination Color appearance
Blue film
Yes
Processor
No
Grayscale 8 bit
No
Black
Yes
No magnification
No
Background Transformation
NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 113 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
114
Specific Camera Information - Fuji
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM print server/printer
Device name:
FN-PS551
Manufacturer:
FUJI Photo Film
SW Revision:
A 07
Physical Interface:
100/10 base T Ethernet, UTP/STP
Network protocol:
TCP/IP
DICOM Conformance Statement:
FN-PS551 May 2001, 4th edition
Image memory:
261.56 MB
Hard disk:
3 Gbyte
Device type:
DICOM camera
Device name:
FM - DPL
Manufacturer:
FUJI Photo Film
SW Revision:
W01-02 (Main Unit) Panel: Unit W00-00
Physical Interface:
SCSI Interface
Network protocol:
None
DICOM Conformance Statement:
None
Image memory:
96 MB
Hard disk:
None
Printer settings Film size
14 IN X 17 IN
Image type:
Select: Standard scan
Gradation type:
Select: 3.0
File Name None
Content
Remarks
FUJI service utility setting
Provided by FUJI
Function Properties
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 114 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji File Name None
115
Content
Remarks
FUJI service utility setting
Provided by FUJI
Protocols: DICOM Properties Network port no. = 104 Data transfer time-out = 600 sec. Number of associations = 6 Association establishment restriction by the memory = enable Print server application entity = one to each printer Data receive if the printer is offline = enable Printer FMDPL Properties Name: AE title of DICOM = FMDPL Fine-printing = off Interface: Interface = E-i/f Pixel clock = 1.0 microsec/pixel Version = type 1 Film size = 14 x 17 (dimmed) Film medium = blue (dimmed) Model: Model = FN-PS551 Manufacturer = FUJI PHOTO FILM CO, LTD Clients: DICOM: CT hostname Properties Name: Hostname = CT hostname IP address = (from system administrator)
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 115 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
116
Specific Camera Information - Fuji File Name None
Content
Remarks
FUJI service utility setting
Provided by FUJI
Protocol: Protocol = DICOM Application Entity Title = PR_hostname Attribute list error (0107H warning) = indicate Attribute value out of range (0116H warning) = indicate Image size larger than image box (B604H warning) = indicate N-event report RQ = disabled Use presentation LUT = No Data transfer time-out = enabled Use extension format = No Magnify: Procedure = SSM Default smoothing type = SHARP LUT: Procedure = SAR Default LUT = 1 (linear) Adj. parameter LUT = 1 r table no. = 17 Max. density = 300 Min. density = 0 Number of tuning points = 0 Printer: fixed, FMDPL
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 116 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji File Name None
117
Content
Remarks
FUJI service utility setting
Provided by FUJI
Output format 1: Border density = 300 Polarity = normal(Pos.) Trim density = 0 Trim = Off Trim width = 1 pixel Number of copies = 1 Film size = 14x17 Medium type = blue Film orientation = portrait Mirror = OFF(normal) Overlay threshold density = 120 Output format 2: Margin between images = 20 pixel Image layout = concentration Annotation: Print server Upper left = (nothing selected) Upper center = (nothing selected) Upper right = (nothing selected) Upper left = (nothing selected) Lower center = (nothing selected) Lower right = (nothing selected) Logging: Network = (Not selected) Printer = (Not selected) DICOM = normal Output image to file = off Precedence = Input Sorting: Sorting conditions = (nothing selected) 2 cameras (each with a separate channel) can be connected to PS551. Only one printer connection is used for the test.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 117 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
118
Specific Camera Information - Fuji Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Camera in utility mode
PRINTER OFFLINE PRINTER OFFLINE Camera offline
Supply magazine empty
SUPPLY EMPTY
SUPPLY EMPTY
Camera out of film
Camera is switched off
n.a.
UNKNOWN
Unspecified problem with camera
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
340.0
339.0
0.29
Portrait
Y
400.0
400.5
0.12
14" x 17"
X
410.0
410.5
0.12
Landscape
Y
330.0
329.0
0.30
14" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
14" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
11" x 14"
X
240.0
240.5
0.21
Portrait
Y
340.0
338.5
0.44
11" x 14"
X
350.0
348.5
0.43
Landscape
Y
230.0
230.2
0.09
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 118 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Fuji
Film size / Direction
© Siemens, 2010
119
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
190.0
189.0
0.53
Portrait
Y
230.0
230.0
0.00
8" x 10"
X
230.0
230.5
0.22
Landscape
Y
180.0
179.0
0.56
CT00-000.814.36.01.02 03.10
Page 119 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
120
Specific Camera Information - CARESTREAM 5-
CARESTREAM DryView 5850
0
General information
0
5Specific Camera Information - CARESTREAM
Block Diagram
Fig. 16:
Available Film Sizes Application
Released
Film type
Medium type
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Others Performance and Connections Associations Maximum number of associations supported: 12 Performance Use medical image 4 of the "Reference Images" patient, maximum film size, positive image, 4x5 format, Copies=1, default center/width, magnification type none. The optimum connection (point-to-point) was used.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 120 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Time
121
90 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
Min. density command is ignored; the min. density is always the fog of the film.
NOTE
No error message is sent for a print job of a film size that is not inserted in the camera.
Known effects
NOTE
Use of the device in a hospital (industrial) area only because of EN55011, Class A.
SCU / modality software configuration Application entity Properties AE title Port number
0
Display
Changes allowed
DV58501
Yes
5040
No
1. Do not use an AE title such as “NER_...”
HC device/ General settings Type Class (printer-spec. file name) DICOM node
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Display
Changes allowed
DICOM printer
No
kodak5850
No
DV5850
Yes
Page 121 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
122
Specific Camera Information - CARESTREAM Filming properties
Display
Changes allowed
Hold printed film jobs
10
Yes
Min. density
20
Yes
100.0 x 100.0
No
Pixel size [1/1000 mm] Film sheet formats:
Number of pixels
14" x 17"
Portrait
[columns x rows]
3448 x 4210 14" x 14" 3448 x 3448 11" x 14" 2686 x 3448 10" x 12" 2432 x 2940 08" x 10" 1924 x 2432
In “Define new” Do not modify/add
Film sheet formats:
Number of pixels
14" x 17”
Select only
Landscape
[columns x rows]
4210 x 3448
Delete only
14" x 14" 3448 x 3448 11" x 14" 3448 x 2686 10" x 12" 2940 x 2432 08" x 10" 2432 x 1924 Medium type Film destination Color appearance
Blue film
Yes
Processor
No
Grayscale, 8-bit
No
Black
Yes
Replicate
No
Background Transformation
NOTE
Do not modify or add film sizes. Do not modify pixel sizes. Delete film sizes that are not available at the customer site.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 122 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
123
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Manufacturer / device type:
DICOM printer (SCP) (internal print server)
Device name: Carestream DryView 5850 Manufacturer: CARESTREAM Health SW revision: V2.0.b3 (MIM Core V3.0.b15) Physical interface: Ethernet 10/100 base T/Tx, Network protocol: TCP/IP DICOM conformance statement: Rev. 1.0, December 10, 2008 Image memory: 1 GB RAM Hard disk: 80 GB Printer Settings The following table describes the level (L = level) in the KODAK configuration tool “KODAK Weblink”.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 123 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
124
Specific Camera Information - CARESTREAM Name (on configuration)
Setting
System, network Host name
DV5800DRE
IP address
Accordingly
Subnet mask
Accordingly
Gateway address
Accordingly
DICOM SCP, communications Port number
5040
Association limit
12
DICOM SCR, destination Identification AE title
DV5850
Name
DV5850
Manufacturer
Carestream Health
Model
DV5850
Media
(parameter identical for all types) Blue; clear; mammo blue
Media type
PageExtent(x,y),Img.Extent(x,y),Img.Origin(x,y) Type=8 x 10, 4064 x 5088, 3848 x 4864, 116, 108 Type=10 x 12, 5088 x 6096, 4864 x 5880, 108, 100 Type=11 x 14, 5588 x 7136, 5372 x 6896, 116, 108 Type=14 x 14, 7136 x 7112, 6896 x 6896, 108, 100 Type=14 x 17, 7136 x 8636, 6896 x 8420, 108, 100
Page image options: Min Vert Sep=2, Min Horiz Sep=2 Max Band Page=10, Max Img Band=10 Pixel pitch=20, border Dmax=4.15 Image Dmin=0.00, Image Dmax=4.15 Lines Image Annot=1, Lines Page Annot=2 Image Annot Height=52, Page Annot Height=52
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 124 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Name (on configuration)
125
Setting Max Magnif. Factor=20, Max Minif. Factor=0.1 Trim Width=2, Accept Annotations=Yes Accept Color Image=Yes, Accept BW Image=Yes Mix Aspect Ratio Page=Y, Mix Aspect Ratio Row=Y Mix Image Size Std Fmt=Y, Mix Image Size Row=Y Mix Req.Size Page=Y, Minify Image To Fit=Y Scale Image To Fit=Y, Crop Image To Fit=Y Req.Size OK=Y, Configuration Notes=empty Configuration Notes = empty
DICOM SCP, SCP services, select the specific modality, modify: Negotiate presentation PLUT
No
Negotiate color
No
Smoothing type
5 (No)
Interpolation
Replicate (No)
TFT/ULUT
Wrkstn2a.W87 (always)
Perception LUT contrast
2 (always)
Image Dmax
3.10 (No)
Polarity
Normal (No)
Image Dmin.
0.20 (No)
Illumination
2000 (No)
Reflected ambient light
10 (No)
Film size
14IN x 17IN(No)
Film base
Blue film (No)
Film orientation
Portrait (No)
Border density
3.1 (No)
Trim
No (No)
Method
Minify/scale (No)
Warnings
Yes (always)
N-events
No (always)
Capture date
No (always)
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 125 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
126
Specific Camera Information - CARESTREAM Name (on configuration)
Setting
Capture time
No (always)
Hosp.name
No (always)
Study page No.
No (always)
Modality ID
No (always)
Film session label override
No (always)
Print priority
Normal (No)
Error / warning messages Camera warning or error messages Open top of camera
Printer message Defined DCS (*1) COVER OPEN
Sent by SCP
Message displayed on SCU (*2)
COVER OPEN
Camera cover, drawer or door open
Camera is switching on PROC INIT
PROC INIT
Processor initializing
Insert film server
CHECK PRINTER
CHECK PRINTER Check camera
Push unlock button for one of the magazines
PRINTER OFFLINE
PRINTER OFFLINE
Camera offline
Film 14x17 supply empty
EMPTY 14x17 BLUE
EMPTY 14x17 BLUE
Camera info: EMPTY 14x17 BLUE
Magazine is removed
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
Send job for a film size that is not inserted
n/a
n/a
Camera is ready
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
NOTE
No error message is sent if the film size of the job to be printed is not inserted in the camera.
Image quality and optical density
0
No specific parameter available.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 126 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
127
Real size scaling
Film size/orientation
© Siemens, 2010
Desired (mm)
Measured (mm)
Difference obtained from desired value in %
14" x 17"
X
300.0
300.0
0.00
Portrait
Y
400.0
401.0
0.25
14" x 17"
X
400.0
401.0
0.25
Landscape
Y
300.0
300.0
0.00
14" x 14"
X
300.0
300.0
0.00
Portrait
Y
300.0
300.0
0.00
14" x 14"
X
300.0
300.0
0.00
Landscape
Y
300.0
300.0
0.00
11" x 14"
X
240.0
241.0
0.42
Portrait
Y
300.0
300.0
0.00
11" x 14"
X
300.0
299.5
0.17
Landscape
Y
240.0
241.0
0.42
10" x 12"
X
220.0
220.0
0.00
Portrait
Y
280.0
280.0
0.00
10" x 12"
X
280.0
280.5
0.18
Landscape
Y
240.0
240.0
0.00
8" x 10"
X
180.0
180.0
0.00
Portrait
Y
240.0
240.0
0.00
8" x 10"
X
220.0
220.0
0.00
Landscape
Y
180.0
180.0
0.00
CT00-000.814.36.01.02 03.10
Page 127 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
128
Specific Camera Information - CARESTREAM
Kodak DryView 6800
5.1
General Information
0
Block Diagram
Fig. 17:
Available Film Sizes Application
Status
Film type
Medium type
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Others Performance and Connections Associations Maximum number of associations supported: 12 Performance Use medical image 4 of the "Reference Images" patient, maximum film size, positive image, 4x5 format, Copies=1, default center/width, magnification type none. The optimum connection (point-to-point) was used.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 128 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Time
129
65 sec
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
No error message is sent if film size of job to be printed is not inserted in camera.
NOTE
Min. Density is always fog on film.
NOTE
A Film Jam error will not be sent to modality as specified.
NOTE
The serrated border line and some pixels of the diagnostic area are cut because of rounded corners.
Known effects NOTE
The standard EN55011 (EMC) is supported with Class A (Hospital use) only.
SCU / modality software configuration Application Entity Properties AE Title Port number
0
Display
Changes allowed
DV68001
Yes
5040
No
1. Do not use an AE title such as “NER_...”
HC Device / General settings Type
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Display
Changes allowed
DICOM printer
No
Page 129 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
130
Specific Camera Information - CARESTREAM HC Device /
Display
Changes allowed
kodak6800_smallB
No
DICOM node
DV6800
Yes
Filming properties
Display
Changes allowed
Hold Printed Film Jobs
10
Yes
Min. density
20
Yes
78.154 x 78.154
No
General settings Class (Printer spec file name)
Pixel Size [1/1000 mm] Film sheet formats,
Number of pixels
14" x 17"
Portrait
[columns x rows]
4488 x 5464 14" x 14" 4448 x 4448 11" x 14" 3514 x 4488 10" x 12" 3184 x 3828 08" x 10" 2528 x 3184
In “Define new” Do not modify/add
Film sheet formats,
Number of pixels
14" x 17”
Select only
Landscape
[columns x rows]
5464 x 4488
Delete only
14" x 14" 4488 x 4488 11" x 14" 4488 x 3514 10" x 12" 3828 x 3184 08" x 10" 3184 x 2528 Medium type Film destination Color appearance Background Transformation
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Blue film
Yes
Processor
No
Grayscale, 8-bit
No
Black
Yes
Replicate
No
Page 130 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM NOTE
131
Do not modify or add film sizes. Do not modify pixel sizes. Delete film sizes that are not available at the customer site.
SCP / hardcopy camera configuration (provided by OEM)
0
Identification Manufacturer / device type:
DICOM Printer (SCP) (internal print server)
Device name: DryView 6800 Manufacturer: Kodak SW Revision: V 2.00 (internal built-in MIM core SW v2.1.b14) Physical interface: Ethernet 10/100/1000 base T/Tx, Network protocol: TCP/IP DICOM conformance statement: Rev. 5.0, September 26, 2007 Image memory: 786 MB RAM Hard disk: 40 GB Printer Settings The following table describes the level (L = level) in the Kodak configuration tool “Kodak Weblink”.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 131 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
132
Specific Camera Information - CARESTREAM L1
L2
L3
L4
Sub-Level of L4
Configuration DICOM SCP SCP Configuration Image Optimization Services Provided to SCU - Negotiate PLUT / NO - Negotiate Grayscale Print / YES - Negotiate Color Print / NO
Image quality - Tonescaling Method / Perception LUT - NO - TFT Set Name / wrkstn2a.w87 - Always Apply - Polarity / NORMAL - NO - Interpolation / REPLICATE - NO - Density Min / 0.20 - NO - Density Max / 2.80 - NO - Smoothing / 0 - NO - Perception LUT Contrast / 3 - Always Apply - Curve Shape Contrast / 0 - NO - Curve Shape Value / 429 - NO - Wet Pivot Density / 1.2 - NO - Illumination / 2000 - NO - Reflected Ambient Light / 10 - NO
Film and Image Options Film and Page Options - Film Size / 14”x17” – NO - Film Base / BLUE FILM – NO - Border Density / 3.10 – NO - Sorter Bin / BIN 1 – NO - Film Orientation / PORTRAIT – NO
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 132 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM L1
L2
L3
L4
133
Sub-Level of L4 - Trim / NO – NO
Image Resizing - Method / MINIFY-Scale – NO - Text Box Location / NONE – Always Apply
Other Options Status Reporting - Send Warnings / YES - Always Apply - Send N-Events to SCU / NO - Always Apply
Annotation Elements - Print Date / NO - Always Apply - Print Hospital Name / NO - Always Apply - Print Modality ID / NO - Always Apply - Print Time / NO - Always Apply - Print Page Number / NO - Always Apply - Common Text Override / NO - Always Apply - Film Session Label / “empty” /NO
Printer and Other Parameters - Printer Priority / NORMAL - NO - Body Part / DEFAULT - NO
SCP Config AutoSetup Modality Identification - Source ID / 3.2 - Modality ID / xxxxxxx6800xxxxxx - Modality Type / Other - NO
Modality Defaults
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 133 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
134
Specific Camera Information - CARESTREAM L1
L2
L3
L4
Sub-Level of L4 - Manufacturer / "empty" - Type / "empty" - Model / "empty"
Error and warning messages Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Camera cover, drawer or door open
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
Unlock magazine
PRINTER OFFLINE
PRINTER OFFLINE
Camera offline
Send film to empty 14x17 supply magazine
EMPTY 14X17 BLUE
EMPTY 14X17 BLUE
Camera info: EMPTY 14X17 BLUE
Camera is warming up
PROC INIT
PROC INIT
Processor initializing
Camera in "power save" or "sleep mode"
PRINTER OFFLINE
PRINTER OFFLINE
Camera offline
Send job for a film size not inserted in camera
n.a.
n.a.
“nothing”
PRINTER OFFLINE
Camera offline
Camera is in calibra- PRINTER tion OFFLINE
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 134 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
135
Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Difference obtained from desired value in %
14" x 17"
X
340.0
338.5
0.44
Portrait
Y
400.0
400.0
0.00
14" x 17"
X
400.0
400.2
0.05
Landscape
Y
340.0
338.5
0.44
14" x 14"
X
300.0
298.5
0.50
Portrait
Y
300.0
300.0
0.00
14" x 14"
X
300.0
300.0
0.00
Landscape
Y
300.0
298.5
0.50
11" x 14"
X
260.0
260.5
0.19
Portrait
Y
340.0
338.5
0.44
11" x 14"
X
340.0
338.5
0.44
Landscape
Y
260.0
260.5
0.19
10" x 12"
X
240.0
238.5
0.62
Portrait
Y
280.0
280.2
0.07
10" x 12"
X
280.0
280.2
0.07
Landscape
Y
240.0
238.5
0.62
8" x 10"
X
160.0
160.0
0.00
Portrait
Y
240.0
238.5
0.62
8" x 10"
X
240.0
238.5
0.62
Landscape
Y
160.0
160.0
0.00
CT00-000.814.36.01.02 03.10
Page 135 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
136
Specific Camera Information - CARESTREAM
Kodak DryView 5800
5.2
General information
0
Block Diagram
Fig. 18:
Available Film Sizes Application
Status
Film type
Medium type
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Others Performance and Connections Associations Maximum number of associations supported: 12 Performance Use medical image 4 of the "Reference Images" patient, maximum film size, positive image, 4x5 format, Copies=1, default center/width, magnification type none. The optimum connection (point to point) was used.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 136 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Time
137
92 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
Min. Density is always fog on film.
NOTE
Some dust artifacts (less then five) visible on film.
NOTE
No error message is sent if film size of job to be printed is not inserted in camera.
NOTE
If the film supply is empty, no messages are displayed in “Film Task Status”
Known effects NOTE
The EN55011 standard is class A (Hospital use) only.
SCU / modality software configuration Application Entity Properties AE Title Port number
0
Display
Changes allowed
DV58001
Yes
5040
No
1. Do not use an AE title such as “NER_...”
HC Device / General settings Type Class (Printer spec file name) DICOM node
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Display
Changes allowed
DICOM printer
No
kodak5800
No
DV5800
Yes
Page 137 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
138
Specific Camera Information - CARESTREAM Filming properties
Display
Changes allowed
Hold Printed Film Jobs
10
Yes
Min. density
20
Yes
78.154 x 78.154
No
Pixel Size [1/1000 mm] Film sheet formats,
Number of pixels
14" x 17"
Portrait
[columns x rows]
4412 x 5384 14" x 14" 4412 x 4412 11" x 14" 3436 x 4412 10" x 12" 3104 x 3752 8" x 10" 2452 x 3104
In “Define new” Do not modify/add
Film sheet formats,
Number of pixels
14" x 17”
Select only
Landscape
[columns x rows]
5384 x 4412
Delete only
14" x 14" 4412 x 4412 11" x 14" 4412 x 3436 10" x 12" 3752 x 3104 8" x 10" 3104 x 2452 Medium type Film destination Color appearance
Blue film
Yes
Processor
No
Grayscale, 8-bit
No
Black
Yes
No magnification
No
Background Transformation
NOTE
Do not modify or add film sizes. Do not modify pixel sizes. Delete film sizes that are not available at the customer site.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 138 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
139
SCP / hardcopy camera configuration (provided by OEM)
0
Identification Manufacturer / device type:
DICOM Printer (SCP) (internal print server)
Device name: DryView 5800 Manufacturer: Carestream (Kodak) SW Revision: V1.01.b01 (internal built-in MIM Core SW V3.0.b11) Physical interface: Ethernet 10/100 base T/Tx, RJ45 connector Network protocol: TCP/IP DICOM conformance statement: Rev. 2.0, December 12, 2007 Image memory: 512 MB RAM Hard disk: 80 GB Printer Settings The following table describes the Kodak configuration tool “Kodak Weblink”.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 139 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
140
Specific Camera Information - CARESTREAM Name (on Configuration)
Setting
System, Network Host Name
DV5800DRE
IPAddr
accordingly
Subnet Mask
accordingly
Default Gateway
accordingly
Connection Name
LAN
DICOM SCP, Communications Dicom Source Communications Port
5040
Association Limit
12
DICOM SCP, Destination Identification
AETiltle=DV5800
Media: Media Type avail./PageExtent(x,y)/ImageExtent(x,y)/ImageOrigin(x,y) 8x10, blue&clear selected 2590x3264, 2452x3107, 74, 69 10x12, blue&clear selected 3264x3890, 3107x3752, 69, 64 11x14, blue&clear selected 3575x4576, 3437x4412, 74, 69 14x14, blue&clear selected 4576x4550, 4412x4412, 69, 64 14x17, blue&clear selected 4576x5525, 4412x5387, 69, 64 Page Image Options: Min Vert Sep=2, Min Horiz Sep=2 Max Band Page=10, Max Img Band=10 Pixel Pitch=12.795, Border DMax=3.10 Image Dmin=0.00, Image DMax=3.10 Lines Image Annot=1, Lines Page Annot=2 Image Annot Height=52, Page Annot Height=52 Max Magnif.Factor=20, Max Minif.Factor=0.1 Trim Width=2, Accept Annotations=Yes
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 140 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Name (on Configuration)
141
Setting Accept Color Image=Yes, Accept BW Image=Yes Mix Aspect Ratio Page=Y, Mix Aspect Ratio Row=Y Mix Image Size Std Fmt=Y, Mix Image Size Row=Y Mix Req.Size Page=Y, Minify Image To Fit=Y Scale Image To Fit=Y, Crop Image To Fit=Y Req.Size OK=Y, Configuration Notes=empty
DICOM SCP, select specific modality, Modify: SCP Configuration, Image Optimization
Services Provided to SCU Negotiate Presentation LUT
No
Negotiate Color Print
No
Image quality Smoothing Type
0 - Always Apply
Interpolation
NONE - No
TFT SeT
Wrkstn2a.W87 -Always Apply
Perception LUT Contrast
1 - Always Apply
Image Polarity
Normal - No
Image DMin
0.00 - No
Image DMax
3.10 - No
Illumination
2000 - No
Reflected Ambient Light 10 - No
SCP Configuration, Film and Image Options Film and Page Options Film size
14IN x 17IN - No
Film Base
Blue Film - No
Film orientation
Portrait - No)
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 141 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
142
Specific Camera Information - CARESTREAM Name (on Configuration)
Setting
Border density
3.10 - No
Trim
No - No
Image Resizing Method
Minify/Scale - No
SCP Configuration, Other Options Status Reporting Report Warnings
YES - Always Apply
Send N-Events to SCU
No Always Apply
Film Session Elements Capture Date
No
Capture Time
No
Hosp.Name
No
Study Page Number
No
Modality ID
No
Film Session Label Override
No
Printer and Other Parameters Printer Priority
Normal - No
SCP Configuration, Modality Preferences Modality Identification Modality ID
PR_ Hostname
Modality Type
Other - No
Modality Defaults Manufacturer
“empty”
Type
“empty”
Model
“empty”
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 142 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
143
Error and warning messages Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Camera is warming up
PROC INIT
PROC INIT
Processor initializing
Film 14x17 supply empty
EMPTY 14x17 BLUE
NORMAL
Camera is ready
Cover or door of camera COVER OPEN open
COVER OPEN
Camera cover, drawer or door open
Send job for a film size not inserted in camera
n/a
Camera is ready
n/a
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available. Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Difference obtained from desired value in %
14" x 17"
X
320.0
320.0
0.00
Portrait
Y
410.0
410.0
0.00
14" x 17"
X
410.0
410.0
0.00
Landscape
Y
330.0
329.5
0.15
14" x 14"
X
330.0
330.0
0.00
Portrait
Y
330.0
330.5
0.15
14" x 14"
X
330.0
330.5
0.15
Landscape
Y
330.0
329.5
0.15
11" x 14"
X
260.0
260.0
0.00
Portrait
Y
330.0
330.0
0.00
11" x 14"
X
320.0
320.0
0.00
Landscape
Y
260.0
260.5
0.19
CT00-000.814.36.01.02 03.10
Page 143 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
144
Specific Camera Information - CARESTREAM
Film size / Direction
Desired (mm)
Measured (mm)
Difference obtained from desired value in %
10" x 12"
X
230.0
230.0
0.00
Portrait
Y
280.0
280.5
0.18
10" x 12"
X
280.0
280.0
0.00
Landscape
Y
230.0
230.0
0.00
8" x 10"
X
180.0
180.0
0.00
Portrait
Y
230.0
230.0
0.00
8" x 10"
X
230.0
229.5
0.22
Landscape
Y
170.0
170.0
0.00
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 144 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
145
Kodak DryView 8900 (small border)
5.3
General information
0
Block diagram
Fig. 19:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
N/A
N/A
N/A
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 12
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 145 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
146
Specific Camera Information - CARESTREAM Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
71 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The minimum density command is not supported. The minimum density value is the value of the fog on the film.
NOTE
The round edge of the film sheet cuts the diagnostic area.
Known Effects n.a.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
0
Display
Changes allowed
DV89001
Yes
5040
No
1. Please do not use an AE Title such as “NER_...”
HC Device / General settings Type Class (Printer spec file name) DICOM Node
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Display
Changes allowed
DICOM printer
No
kodak8900_smallB
No
DV8900
Yes
Page 146 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Filming properties
147
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
78.154 x 78.154
No
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4488 x 5464 14" x 14" 4488 x 4488 11" x 14" 3514 x 4488 10" x 12" 3184 x 3828 8" x 10" 2528 x 3184
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5464 x 4488
Delete only
14" x 14" 4488 x 4488 11" x 14" 4488 x 3514 10" x 12" 3828 x 3184 8" x 10" 3184 x 2528 Medium type Film destination Color appearance
Blue film
Yes
Processor
No
Grayscale 8 bit
No
Black
Yes
Replicate
No
Background Transformation
NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 147 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
148
Specific Camera Information - CARESTREAM
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Manufacturer / device type:
DICOM Print Server (SCP)
Device name: DryView 8900 Manufacturer: Kodak SW Revision: V 3.17, MIM 5.6.b14 with WIN 2000 Physical type: Ethernet 10/100 /1000 base T/Tx, RJ45 Network protocol: TCP/IP DICOM Conformance Statement: Rev. C, January 28, 2004. Image memory: 786 MB RAM Hard disk: 40 GB Printer settings Content 8900 setup: (Provided by Kodak) ¹ under Configuration, System, Network: Host Name=DV8900, IPAddr=accordingly Subnet Mask=accordingly, Gateway Addr=accordingly under Configuration, DICOM SCP, Communications: Port=5040, Association Limit=12, Source Name=DICOM under Configuration, Destination:
General Remarks: Log. Name=8900 Media types: Media=35x43cm, 9100x11037, 10781, any Media types: Media=35x35 cm, 9100x9087, 8831, Any Media types: Media=11"x14", 7137x9100, 8844, Any Media types: Media=10"x12", 6490x7767, 7511, Any Media types: Media=8"x10", 5167x6490, 6234, Any Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On Formatting: DICOM Annotation Box=On, Req. Image Size=On Formatting: Req. Size Scale=On, Req. Size Mix Page=On Formatting: Req. Size Mix Row=On, Trim=On, Formatting: True Landscape=On, Rotation=On Formatting: Minify/Crop=On, Tone Scaling on Image Basis=On Formatting: Max Img Band=20, Max Band Page=20, Max Img Cols=0 Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 Formatting: Min Vert Sep=4, Trim Width Enabled=4 Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 148 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
149
Content 8900 setup: (Provided by Kodak) ¹ under Configuration, DICOM SCP, SCP Services, Negotiate Presentation LUT=NO, TFT/ULUT= Wrkstn2a.w87 (Always=Y) Contrast= 3 (Always=Y), Smoothing type=0 (Always=Y), Polarity= Normal, (Always=N) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=No (Always=Y), Warnings=Yes Print Priority=Normal (Always=N), Border=3.99 (Always=N) 2mmBorder=yes Film Clip Border = No Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) Sorter Bin=Bin1 (Always=N), Include print date in annotation=No Include print time in annotation=No Include page number in annotation=No Include hospital name in annotation=No Include modality ID in annotation=No Modality ID=PR_ xxx.xxx.xxx Annotation Override=No, Density Patch = No Image Resizing=Minify/Scale (Always=N), Text Box Location=None, Source ID=DI016 Error / Warning Messages (examples) Action that results Printer messages in camera error Defined DCS (*1) Sent by SCP messages Cover or door of camera open
COVER OPEN
Camera cover, drawer or door open
Camera is warming PROC INIT up
PROC INIT
Processor initializing
Supply magazine empty
EMPTY 14X17 BLUE
EMPTY 14X17 BLUE
Camera info: EMPTY 14X17 BLUE
Magazine with damaged chip inserted
BAD SUPPLY MGZ BAD SUPPLY MGZ Problem with supply magazine
© Siemens, 2010
COVER OPEN
Messages displayed on SCU (*2)
CT00-000.814.36.01.02 03.10
Page 149 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
150
Specific Camera Information - CARESTREAM Action that results Printer messages in camera error Defined DCS (*1) Sent by SCP messages
Messages displayed on SCU (*2)
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
340.0
340.0
0.00
Portrait
Y
410.0
411.0
0.24
14" x 17"
X
400.0
401.0
0.25
Landscape
Y
330.0
330.0
0.00
14" x 14"
X
340.0
339.5
0.15
Portrait
Y
330.0
330.0
0.00
14" x 14"
X
340.0
340.0
0.00
Landscape
Y
330.0
330.0
0.00
11" x 14"
X
270.0
270.0
0.00
Portrait
Y
330.0
330.0
0.00
11" x 14"
X
340.0
340.0
0.00
Landscape
Y
250.0
250.0
0.00
10” x 12”
X
240.0
240.0
0.00
Portrait
Y
280.0
280.0
0.00
10” x 12”
X
290.0
290.0
0.00
Landscape
Y
230.0
230.0
0.00
8" x 10"
X
190.0
190.0
0.00
Portrait
Y
230.0
230.0
0.00
8" x 10"
X
240.0
240.0
0.00
Landscape
Y
180.0
180.0
0.00
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 150 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
151
Kodak DryView 8700-Plus / PACS Link MIM 200
5.4
General information
0
Block diagram
Fig. 20:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 13
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 151 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
152
Specific Camera Information - CARESTREAM Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
120 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
Camera does not support minimum density command.
NOTE
The background command does not work properly. Camera doesn't support background white.
Known Effects n.a.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
0
Display
Changes allowed
DV87001
Yes
5040
No
1. Please do not use an AE title such as “NER_...”
HC Device / General settings Type Class (Printer spec file name) DICOM Node
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Display
Changes allowed
DICOM printer
No
imation8700
No
DV8700
Yes
Page 152 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Filming properties
153
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
78.0 x 78.0
No
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4096 x 5220
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5220 x 4096
Delete only
Medium type
Yes
Processor
No
Grayscale 8 bit
No
Black
Yes
No magnification
No
Background Transformation
NOTE
Do not modify/add
Blue film
Film destination Color appearance
In “define new”
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM Print Server (SCP) Device name: PACS Link MIM 200 Manufacturer: Kodak SW Revision: V 6.1.1 Physical Interface: Ethernet (RJ45) Network protocol: TCP/IP
DICOM Conformance Statement: Rev. J., June 20, 2005 Image memory: 256 MB Hard disk: 4 GB
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 153 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
154
Specific Camera Information - CARESTREAM Device type:
Printer Device name: DryView 8700 Manufacturer: Kodak SW Revision: 1.34 Physical Interface: Fiber optic Network protocol: None
DICOM Conformance Statement: None Image memory: 32 MB Hard disk: n.a. Printer settings Content:
Configuration MIM 200 setup Under Configure, Network:
Node Name=MIM, IPAddr=accordingly Subnet Mask=accordingly, Gateway Addr=accordingly under Configure, Input, Network, Add:
Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 under Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 154 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Content:
155
Configuration ¹ General: Log.Name=8700 General: Database Name=8700, Model=8700, Memory=32 Media info.: Media=35x43cm, 4096x5223, 5133, blue Output parameters.: Cmd=SuperSet, Baud=19200, Data=8,Stop=1, Parity=None Output parameters.: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 Supported item: Collation=On, Text=On, Tone Scaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format types: Custom=On, Slide=On, Row Symmetric=On Format types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image processing: Gray scale=On, Minimize=On, Max Image Dmax=3.1 M952 usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 Under Configure, SCP Services, select the specific modality, modify:
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 155 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
156
Specific Camera Information - CARESTREAM Content:
Configuration ¹ Image resizing Resizing =Minify/Scale, Always Apply=N Relocate Text Box, Location = none N-EVENT Reporting, Reporting=N, Always Apply=Y Warning Status=Y PLUT=N Tone Scaling=PL (PerceptionLUT), Always Apply=Y Curve Shape/TFT, TFT/ULUT= Wrkstn2a.w87, Always Apply=Y Contrast (dry)=01, Always Apply=Y Interp. /Smoothing, Smoothing Type=0, Always Apply=N Image Dmin=0.00, Always Apply=N, Image Dmax=3.00, Always Apply=N Polarity=Normal, Always Apply=N Border=3.99, Always Apply=N Size=14"x17", Always Apply=N Base=Blue Film, Always Apply=N Priority=Normal, Always Apply=N Page Annotation, Annotation Setup, Always Apply=N, Modality ID=Off, Hospital Name=Off, Print Date=Off, Print Time=Off, Page Number=Off Basic Color=N 8700 Plus setup
under COMM Menu: 969 default under IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 under EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60 Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Magazine empty
SUPPLY EMPTY
SUPPLY EMPTY
Camera out of film
Open Top Cover
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
Camera switched off
PRINTER DOWN
PRINTER DOWN
Camera down
No supply magazine inserted
NO SUPPLY MGZ
NO SUPPLY MGZ
Film supply not available
Camera is warming up
PRINTER BUSY
PRINTER BUSY
Camera initializing
Film jam in camera
FILM JAM
FILM JAM
Film jam
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 156 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
157 Message displayed on SCU (*2)
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
310.0
310.5
0.16
Portrait
Y
390.0
390.0
0.00
14" x 17"
X
390.0
390.5
0.13
Landscape
Y
310.0
310.5
0.16
14" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
14" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
11" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
11" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
CT00-000.814.36.01.02 03.10
Page 157 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
158
Specific Camera Information - CARESTREAM
Kodak DryView 8200 / PACS Link MIM 200
5.5
General information
0
Block diagram
Fig. 21:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 12
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 158 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
159
Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
228 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The minimum density command is not supported.
NOTE
The background command does not work properly. The border is always black.
Known Effects n.a.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
0
Display
Changes allowed
DV82001
Yes
5040
No
1. Please do not use an AE title such as “NER_...”
HC Device /
Display
Changes allowed
DICOM printer
No
Class (printer spec file name)
kodak8200
No
DICOM Node
Kodak8200
Yes
General settings Type
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 159 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
160
Specific Camera Information - CARESTREAM Filming properties
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
78.0 x 78.0
No
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4360 x 5220 14" x 14" 4360 x 4244 11" x 14" 3272 x 4360
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5220 x 4360
Delete only
14" x 14" 4244 x 4360 11" x 14" 4360 x 3272 Medium type
Blue film
Yes
Processor
No
Grayscale 8 bit
No
Black
Yes
No magnification
No
Film destination Color appearance Background Transformation
NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM Print Server (SCP) Device name: PACS Link MIM 200 Manufacturer: Kodak SW Revision: V 6.1.1
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 160 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Device type:
161
DICOM Print Server (SCP) Physical Interface: Ethernet 10/100 base T/Tx Network protocol: TCP/IP
DICOM Conformance Statement: DCM, Rev. J, June 20, 2005 Image memory: 256 MB RAM Hard disk: 4 GB
Device type:
Printer Device name: DryView 8200 Manufacturer: Kodak SW Revision: 3.5 Physical Interface: 100/10 base T Ethernet Network protocol: TCP/IP
DICOM Conformance Statement: n.a. Image memory: 50 MB Hard disk: n.a. Printer settings Content:
Configuration MIM 200 setup Under Configure, Network:
Node Name=MIM, IPAddr=accordingly Subnet Mask=accordingly, Gateway Addr=accordingly under Configure, Input, Network, Add:
Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 under Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 161 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
162
Specific Camera Information - CARESTREAM Content:
Configuration ¹ General Remarks: Log.Name=8200, IPAddr=100.100.100.40 General Remarks: Database Name=8200, Model=8200, Memory 32 Media info.: Media=35x43cm, 4361x5223, 5133, Any (Blue, Clear) Media=35x35cm, 4361x4247, 4157, any (blue, clear) Media=11inx14in, 3272x4361, 4271, any (blue, clear) Supported item: Collation=On, Text=On, Tone Scaling=On, Supported item: Remote Image Deletion=On, Rotation=On Interpolation: No Magnification=On, Bilin=On, Repl=On, Interpolation: CubicSpline=On, Cubic Convolution 2=On Format types: Custom=On, Slide=On, Row Symmetric=On Format types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image processing: Gray scale=On, Minimize=On, Max Image Dmax=3.1 SCU: Density Space=On, Variable Border=On, PLUT Service=On SCU: Curve Shape Tone Scaling=On, Perception LUT Tone Scaling=On M952 usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 162 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Content:
163
Configuration Under Configure, SCP Services, select the specific modality, modify:
¹ Image Resizing, Resizing =Minify/Scale, Always Apply=N Relocate Text Box, Location = none N-EVENT Reporting, Reporting=N, Always Apply=Y Warning Status=Y PLUT=N Tone Scaling=PL (PerceptionLUT), Always Apply=Y Curve Shape/TFT, TFT/ULUT=Wrkstn2a.w87, Always Apply=Y Contrast (dry)=01, Always Apply=N Interp. /Smoothing, Smoothing Type=0, Always Apply=N Image Dmin=0.00, Always Apply=N, Image Dmax=3.00, Always Apply=N Polarity=Normal, Always Apply=N Border=3.99, Always Apply=N Size=14"x17", Always Apply=N Base=Blue Film, Always Apply=N Priority=Normal, Always Apply=N Page Annotation, Annotation Setup, Always Apply=N, Modality ID=Off, Hospital Name=Off, Print Date=Off, Print Time=Off, Page Number=Off Basic Color=N 8200 setup under the CONFIGURATION menu:
On IMAGE QUALITY-> TFT FILES menu: TFT=Ver693c0.w87 under the LOCAL PANEL Menu: Contrast=6, Density=3.00 under the DICOM Menu: SCU config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 DICOM config.: AE=ANY_ANY, Port=1025 Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Supply magazine not NO SUPPLY MGZ inserted
NO SUPPLY MGZ
Film supply not available
Less than 5 films in supply magazine
SUPPLY LOW
SUPPLY LOW
Film supply low
Supply magazine empty
SUPPLY EMPTY
SUPPLY EMPTY
Camera out of film
Camera is warming up
PRINTER INIT
PRINTER INIT
Camera initializing
PROC INIT
PROC INIT
Processor initializing
Camera switched off
PRINTER DOWN
PRINTER DOWN
Camera down
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 163 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
164
Specific Camera Information - CARESTREAM Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
400.0
398.5
0.38
14" x 17"
X
390.0
389.5
0.13
Landscape
Y
330.0
330.0
0.00
14" x 14"
X
330.0
330.0
0.00
Portrait
Y
320.0
319.5
0.16
14" x 14"
X
320.0
319.5
0.16
Landscape
Y
330.0
330.0
0.00
11" x 14"
X
250.0
249.5
0.20
Portrait
Y
330.0
330.5
0.15
11" x 14"
X
330.0
330.0
0.00
Landscape
Y
240.0
240.0
0.00
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 164 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
165
Kodak DryView 8100 / PACS Link MIM 200
5.6
General information
0
Block diagram
Fig. 22:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 12
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 165 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
166
Specific Camera Information - CARESTREAM Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
234 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The minimum density command is not supported.
NOTE
The background command does not work properly. The Border Density is always black.
Known Effects n.a.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
0
Display
Changes allowed
DV81001
Yes
5040
No
1. Please do not use an AE title such as “NER_...”
HC Device / General settings Type Class (Printer spec file name) DICOM Node
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Display
Changes allowed
DICOM printer
No
kodak8100
No
Kodak8100
Yes
Page 166 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Filming properties
167
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
78.0 x 78.0
No
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4096 x 5216
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5216 x 4096
Delete only
Medium type
Yes
Processor
No
Grayscale 8 bit
No
Black
Yes
No magnification
No
Background Transformation
NOTE
Do not modify/add
Blue film
Film destination Color appearance
In “define new”
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type:
DICOM Print Server (SCP) Device name: PACS Link MIM 200 Manufacturer: Kodak SW Revision: V 6.1.1 Physical Interface: Ethernet 10/100base T/Tx Network protocol: TCP/IP
DICOM Conformance Statement: Rev. J, June 20, 2005 Image memory: 256 MB RAM Hard disk: 4 GB
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 167 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
168
Specific Camera Information - CARESTREAM Device type:
Printer Device name: DryView 8100 Manufacturer: Kodak SW Revision: 2.7 Physical Interface: n.a. Network protocol: n.a.
DICOM Conformance Statement: n.a. Image memory: 32 MB Hard disk: None Printer settings Content:
Configuration MIM 200 setup Under Configure, Network:
Node Name=MIM, IPAddr=accordingly Subnet Mask=accordingly, Gateway Addr=accordingly under Configure, Input, Network, Add:
Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 under Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 168 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Content:
169
Configuration ¹ General Remarks: Log.Name=8100, General Remarks: Database Name=8100, Model=8100, Memory 32 Media info.: Media=35x43cm, 4096x5223, 5133, blue Output parameters.: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Output parameters.: Pixel=12, Header/Line, Transfer=1000 KHz, Acq=60 Supported item: Collation=On, Text=On, Tone Scaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On, CubicSpline=On Format types: Custom=On, Slide=On, Row Symmetric=On Format types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image processing: Gray scale=On, Minimize=On, Max Image Dmax=3.1 M952 usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 Under Configure, SCP Services, select the specific modality, modify:
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 169 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
170
Specific Camera Information - CARESTREAM Content:
Configuration ¹ Image resizing Resizing =Minify/Scale, Always Apply=N Relocate Text Box, Location = none N-EVENT Reporting, Reporting=N, Always Apply=Y Warning Status=Y PLUT=N Tone Scaling=PL (PerceptionLUT), Always Apply=Y Curve Shape/TFT, TFT/ULUT=Wrkstn2a.w87, Always Apply=Y Contrast (dry)=01, Always Apply=Y Interp. /Smoothing, Smoothing Type=0, Always Apply=N Image Dmin=0.00, Always Apply=N, Image Dmax=3.00, Always Apply=N Polarity=Normal, Always Apply=N Border=3.99, Always Apply=N Size=14"x17", Always Apply=N Base=Blue Film, Always Apply=N Priority=Normal, Always Apply=N Page Annotation, Annotation Setup, Always Apply=N, Modality ID=Off, Hospital Name=Off, Print Date=Off, Print Time=Off, Page Number=Off Basic color=N 8100 setup under the CONFIGURATION menu: On SIB board (i.e. external switch below control plugs):
SW1=Down Under the COMMUNICATIONS Menu:
Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,... P6=0 On IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off On IMAGE QUALITY-> TFT FILES menu: TFT=Ver693c0.w87 under the LOCAL PANEL Menu: Contrast=6, Density=3.00 Under the SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 Under the DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Top cover or door open
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
Supply magazine empty
SUPPLY EMPTY
SUPPLY EMPTY
Camera out of film
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 170 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Camera warning or error messages
Printer message Defined DCS (*1)
Supply magazine not NO SUPPLY MGZ inserted
Sent by SCP NO SUPPLY MGZ
171 Message displayed on SCU (*2) Film supply not available
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
310.0
310.0
0.00
Portrait
Y
400.0
401.5
0.37
14" x 17"
X
390.0
391.5
0.38
Landscape
Y
310.0
310.5
0.16
14" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
14" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
11" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
11" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
CT00-000.814.36.01.02 03.10
Page 171 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
172
Specific Camera Information - CARESTREAM
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 172 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
173
Kodak DryView 8150
5.7
General information
0
Block diagram
Fig. 23:
Available film sizes Format
Release status
Film type
Medium type
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
Yes
DVB
Blue-based
Landscape
Yes
DVB
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 12
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 173 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
174
Specific Camera Information - CARESTREAM Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
146 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The minimum density command is not supported. The minimum density value is the value of the fog on the film.
Known Effects NOTE
The European Standard EN55011 is supported only with Class A (hospital use).
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
0
Display
Changes allowed
DV81501
Yes
5040
No
1. Please do not use an AE Title such as “NER_...”
HC Device / General settings Type Class (Printer spec file name) DICOM node
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Display
Changes allowed
DICOM Printer
No
kodak8150
No
DV8150
Yes
Page 174 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM Filming properties
175
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
78.12 x 78.12
No
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4438x5390 14" x 14" 4438x4414 11" x 14" 3440x4438
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5390x4438
Delete only
14" x 14" 4414x4438 11" x 14" 4438x3440 Medium type
Blue film
Yes
Processor
No
Gray scale 8 bit
No
Black
Yes
No magnification
No
Film destination Color appearance Background Transformation
NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Manufacturer / device type:
DICOM Printer (SCP)
Device name: DryView 8150 Manufacturer: Kodak SW Revision: V1.1.b04 / MIM_V5.7.b12
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 175 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
176
Specific Camera Information - CARESTREAM Manufacturer / device type:
DICOM Printer (SCP)
Physical type: Ethernet 10/100 base T/Tx Network protocol: TCP/IP DICOM Conformance Statement: Rev. 1.0, July 27, 2004 Image memory: 786 MB RAM Hard disk: 40 GB Printer settings DICOM SCP / Communications Port number
5040
Association Limit
12
Source Name
DICOM
DICOM SCP / Cropping No settings available
DICOM SCP / SCP Services / Image Optimization Negotiate Presentation LUT
No
Negotiate Color Print
No
TFT Set Name
LINODS.w87
Always Apply TFT Set
Yes
Contrast
4
Always Apply Contrast
Yes
Smoothing Type
0
Always Apply Smoothing Type
No
Image DMin
0.00
Always Apply Image DMin
No
Image DMax
3.00
Always Apply Image DMax
No
Image Polarity
Normal
Always Apply Image Polarity
No
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 176 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
177
DICOM SCP / SCP Services / Other Options Send N-Event Reports
No
Always Apply Send N-Event Reports
Yes
Send Warnings
Yes
Print priority
Normal
Always Apply Print Priority
No
Border Type
3.99
Always Apply Border Type
No
2mm Border
No
Film Clip Border
No
Film Base
Blue Film
Always Apply Film Base
No
Film Size
14 IN X 17 IN
Always Apply Film Size
No
Include Print date in Annotation
No
Include Print time in Annotation
No
Include Page Number in Annotation
No
Include Hospital Name in Annotation
No
Include modality ID in Annotation
No
Modality ID
PR_hostname
Annotation Override
No
Density Patch
No
Image Resizing
Minify/Scale
Always Apply Image Resizing
No
Text Box Location
None
Source ID
DI000
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 177 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
178
Specific Camera Information - CARESTREAM Error / Warning Messages (examples) Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Supply magazine empty
EMPTY 14X17 BLUE
EMPTY 14X17 BLUE
Camera info:
Cover or door of camera open
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
Magazine with damaged chip inserted
BAD SUPPLY MGZ BAD SUPPLY MGZ Problem with supply magazine
Camera in calibration PRINTER DOWN
PRINTER DOWN
EMPTY 14X17 BLUE
Camera offline
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
328.5
0.45
Portrait
Y
410.0
409.5
0.12
14" x 17"
X
410.0
410.0
0.00
Landscape
Y
330.0
328.5
0.45
14" x 14"
X
330.0
327.5
0.76
Portrait
Y
330.0
330.0
0.00
14" x 14"
X
330.0
330.0
0.00
Landscape
Y
330.0
327.5
0.76
11" x 14"
X
250.0
250.0
0.00
Portrait
Y
330.0
327.5
0.76
11" x 14"
X
330.0
327.5
0.76
Landscape
Y
250.0
250.0
0.00
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 178 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - CARESTREAM
Film size / Direction
© Siemens, 2010
179
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
CT00-000.814.36.01.02 03.10
Page 179 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
180
Specific Camera Information - Konica Minolta 6-
KONICA MINOLTA DryPro 873
0
General information
0
6Specific Camera Information - Konica Minolta
Block Diagram
Fig. 24:
Available Film Sizes Format
Released
Film type
Medium type
Portrait
Yes
SD-Q
Blue-based
Landscape
Yes
SD-Q
Blue-based
Portrait
Yes
SD-Q
Blue-based
Landscape
Yes
SD-Q
Blue-based
Portrait
Yes
SD-Q
Blue-based
Landscape
Yes
SD-Q
Blue-based
Portrait
Yes
SD-Q
Blue-based
Landscape
Yes
SD-Q
Blue-based
Portrait
Yes
SD-Q
Blue-based
Landscape
Yes
SD-Q
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 8
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 180 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
181
Performance Use medical image 4 of the "Reference Images" patient, maximum film size, positive image, 4x5 format, Copies=1, default center/width, magnification type none. The optimum connection (point to point) was used. Time
60 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The DICOM server of the camera has to be configured with magnification type “Cubic7”. (magnification type "NONE" is not supported by the camera
Known effects NOTE
The EMC classification is not declared in CE 93/42/EEC. Therefore, this device can be installed only in hospital areas.
SCU / modality software configuration Application entity Properties AE title Port number
HC device/ General settings Type Class (Printer-spec. file name) DICOM Node
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
DPRO873
Yes
104
No
Display
Changes allowed
DICOM printer
No
konicaDryPro873_LB
No
DPRO873
Yes
Page 181 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
182
Specific Camera Information - Konica Minolta Filming properties
Display
Changes allowed
Hold printed film jobs
10
Yes
Min. density
20
Yes
78.6 x 78.6
No
Pixel size [1/1000 mm] Film sheet formats:
Number of pixels
14" x 17"
Portrait
[columns x rows]
4310 x 5160 14" x 14" 4310 x 4200 11” x 14” 3340 x 4180 10” x 12” 3000 x 3530 8" x 10" 2350 x 2880
In “Define new” Do not modify/add
Film sheet formats:
Number of pixels
14" x 17"
Select only
Landscape
[columns x rows]
5260 x 4268
Delete only
14” x 14” 4294 x 4268 11" x 14" 4306 x 3327 10” x 12” 3644 x 2970 8" x 10" 2996 x 2322 Medium type Film destination Color appearance
Blue film
No
Processor
Yes
Gray scale, 8-bit
No
Black
No
No magnification
No
Background Transformation
NOTE
Do not modify or add film sizes. Do not modify pixel sizes. Delete film sizes that are not available at the customer site.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 182 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
183
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type: DICOM printer (SCP) Device name: KONICA MINOLTA Drypro 873 Manufacturer: KONICA MINOLTA SW revision: V2.00R01 Physical type: Ethernet 10/100/1000 Base T/Tx Network protocol: TCP/IP DICOM conformance statement: D.C.S.: Print link 5-IN, code No.: 1116, Ver.1.22 , dated 12/05/2008 Image memory: 256 MB RAM Hard disk: 75 GB Printer Settings Web service tool for Printlink 5 Configuration parameter: Select input channel in "Input Parameter Setup Screen" window:
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 183 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
184
Specific Camera Information - Konica Minolta Content
Printer setting
Value
Input channel
2: XXXXX
Number of copies
1
Print priority
HIGH
Film destination
BIN_1
Film orientation
PORTRAIT
Magnification type
CUBIC (checkbox selected)
Smooth type
7 (checkbox selected)
Border density
BLACK
Min. Dens.
0.20
Max. Dens.:
3.00
Trim:
NO
Config. information
KC_LUT=1 (checkbox selected)
Density
0
Contrast
0
Flip
NORMAL
Polarity
NORMAL
Medium type
BLUE FILM
Film size ID
14" x 17"
Configuration LUT: select input channel in "LUT Setup Screen" window:
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 184 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta Content
185
Printer setting
Value
Input channel:
2: XXXXX
LUT No.
1 (KC_LUT=1)
Display mode
16-step density
Drag mode
One
Illumination
2000
Refl. ambient
10
Basic pattern
(linear LUT):
Previous setting
1=20 / 2=39 / 3=57 / 4=76 / 5=95 / 6=113 / 7=132 / 8=151 / 9=169 / 10=188 / 11=207 / 12=225 / 13=244 / 14=263 / 15=281 / 16=300)
Test image convert
P-value convert
Polarity
NORMAL
Printlink 5 maintenance Host name
LENOVO-82B23A46
IP address
xxx.xxx.xxx.xxx
SCP AE title
DPRO873
SCU AE title
KC_PLNK5_SCU
Port No.
104, 6000, 5200
Select input channel in the "Printlink 5 maintenance" window: “Input Parameter Setup Screen” window appears Channel
2:XXXX
Channel name
XXXX
Protocol name
DICOM PRINT IN
Default format
1x1
IP Addr./H. Name
xxx.xxx.xxx.xxx
Maker
-
Model
-
AET-SCU
PR_hostname
Common input ... ("Not relevant for printing") DRYPRO 873 output setup:
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 185 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
186
Specific Camera Information - Konica Minolta Content
Printer setting
Value
Luminance conversion
ON
Border size
CT/MRI
Format type
EVEN
Pat. name stamp type
OFF
Pixel size chg method
78.6 u
Size type check
(checkbox selected)
DICOM PRINT IN N-event port no.
0
Empty notice LV
Failure
Error level
M/M error receive (dimmed)
Max PDU
64
Upper stamp use
OFF
Printlink 5 maintenance IMAGER: Double-click on Imager Ch1
DPRO873
Imager output channel setup screen Channel name
DPRO873
Protocol name
DICOM PRINT OUT
IP addr./host name:
Local host
DRYPRO832 IP addr.
xxx.xxx.xxx.xxx
SCP AET
KC_DPRO7_P001
Port No.
65101
Common output
SOMATOM Definition AS
Connect imager
DRYPRO873
Output pixels
12-bit
Convert LUT
ON
Stretch base
No stretch
Stretch mode
Bilinear
Warning out
ON
Layout
DcmPrtLayOut873.ini
CT00-000.814.36.01.02 03.10
Page 186 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta Content
Printer setting
Value
Output name
ASCII + KANJI + KANA
Error code ignorance
(empty)
Output image color
Gray scale
Study output order
Normal
Annotation box
Not sent
187
Calculate sampling pitch (checkbox enabled)
Imager default setting: Default film size 1
14x17
Def. media type 1
BLUE FILM
Def. film type 2
10 x 12
Def. media type 2
BLUE FILM
Default film size 3
8 x 10
Def. media type 3
BLUE FILM
Error/warning messages (examples) Action that results in Printer messages camera error mesDefined DCS (*1) Sent by SCP (*2) sages Shutter is inserted in supply magazine, camera is switched on.
PRINTER DOWN
PRINTER DOWN
Message displayed on SCU Camera down
Camera is switched CHECK PRINTER CHECK PRINTER Check camera into service mode directly on the camera Switch camera off/on and open cover of camera.
COVER OPEN
COVER OPEN
Camera cover or door open
Supply magazine for EMPTY 11x14 11"x14" contains only BLUE 18 films. A job with 18 films is sent.
EMPTY 11x14 BLUE
11x14 blue film supply empty
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 187 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
188
Specific Camera Information - Konica Minolta Action that results in Printer messages camera error mesDefined DCS (*1) Sent by SCP (*2) sages
Message displayed on SCU
The value of the film FILM TRANSP counter is higher than ERR the number of films that are really in the supply magazine.
FILM TRANSP ERR
Film transport problem.
Film for size 14x17 is sent but three magazines with other film sizes are inserted.
nothing (see note below)
Job aborts and must be deleted.
n/a
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality NOTE
If a job is sent with a film size that is not inserted in the camera, the job aborts (response of film box reports status 262) and must be deleted so that it is possible to continue with filming.
Image quality and optical density
0
No specific parameter available. Real size scaling
Film size/orientation
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
300.0
301.5
0.50
Portrait
Y
400.0
400.0
0.00
14" x 17"
X
400.0
400.0
0.00
Landscape
Y
300.0
301.0
0.33
14" x 14"
X
300.0
301.0
0.33
Portrait
Y
300.0
300.5
0.17
14" x 14"
X
300.0
300.5
0.17
Landscape
Y
300.0
301.0
0.33
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 188 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
Film size/orientation
© Siemens, 2010
189
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
11" x 14"
X
240.0
240.0
0.00
Portrait
Y
300.0
301.0
0.33
11" x 14"
X
300.0
301.0
0.33
Landscape
Y
240.0
240.0
0.00
10” x 12”
X
200.0
200.5
0.25
Portrait
Y
280.0
280.0
0.00
10” x 12”
X
240.0
240.0
0.00
Landscape
Y
200.0
200.5
0.25
8" x 10"
X
160.0
160.5
0.31
Portrait
Y
200.0
200.0
0.00
8" x 10"
X
200.0
200.0
0.00
Landscape
Y
160.0
160.0
0.00
CT00-000.814.36.01.02 03.10
Page 189 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
190
Specific Camera Information - Konica Minolta
Konica Minolta DryPro 832
6.1
General Information
0
Block Diagram
Fig. 25:
Available Film Sizes Format
Release status
Film type
Medium type
Portrait
Yes
DRYPRO SD-Q
Blue-based
Landscape
Yes
DRYPRO SD-Q
Blue-based
Portrait
Yes
DRYPRO SD-Q
Blue-based
Landscape
Yes
DRYPRO SD-Q
Blue-based
Portrait
Yes
DRYPRO SD-Q
Blue-based
Landscape
Yes
DRYPRO SD-Q
Blue-based
Portrait
Yes
DRYPRO SD-Q
Blue-based
Landscape
Yes
DRYPRO SD-Q
Blue-based
Portrait
Yes
DRYPRO SD-Q
Blue-based
Landscape
Yes
DRYPRO SD-Q
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 9
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 190 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
191
Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, 4x5 format, Copies=1, default center/width, magnification type none. The optimum connection (point to point) was used. Time
62 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
Magnification "NONE" not supported therefore Konica Server needs a fixed setting: Magnification "CUBIC" with smoothing type 7.
NOTE
If “Camera cover open”, no message is displayed. If the camera is ready, jobs will be queued but not printed.
NOTE
If a film is not inserted, but configured in camera server, the queue is stopped with a camera software problem. This job must be deleted from the camera queue.
Known effects NOTE
The DICOM Print Server PRINTLINK 5 is not 510k registered.
NOTE
Two film sizes can be installed at Drypro 832. To install other film sizes the Konica-Minolta Service Technician is needed.
SCU / modality software configuration Application Entity Properties AE Title Port number
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
DPRO832
Yes
104
No
Page 191 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
192
Specific Camera Information - Konica Minolta HC Device /
Display
Changes allowed
DICOM printer
No
konicaDryPro832_largeB
No
Konica832
Yes
General settings Type Class (Printer spec. file name) DICOM Node
Filming properties
Display
Changes allowed
Hold printed film jobs
10
Yes
Min. density
20
Yes
78.6 x 78.6
No
Pixel Size [1/1000 mm] Film sheet formats,
Number of pixels
14" x 17"
Portrait
[columns x rows]
4344 x 5196 14” x 14” 4344 x 4230 11" x 14" 3390 x 4230 10” x 12” 3046 x 3580 8" x 10" 2398 x 2932
In “Define new” Do not modify/add
Film sheet formats,
Number of pixels
14" x 17"
Select only
Landscape
[columns x rows]
5260 x 4268
Delete only
14” x 14” 4294 x 4268 11" x 14" 4306 x 3327 10” x 12” 3644 x 2970 8" x 10" 2996 x 2322 Medium type Film destination Color appearance
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Blue film
No
Processor
Yes
Gray scale 8 bit
No
Page 192 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta Filming properties
Display
Changes allowed
Black
No
No magnification
No
Background Transformation NOTE
193
Do not modify or add film sizes. Do not modify pixel sizes. Delete film sizes that are not available at the customer site.
SCP / hardcopy camera configuration (provided by OEM)
0
Identification Device type: DICOM Printer (SCP) Device name: DRYPRO 832 Manufacturer: Konica Minolta SW Revision: V1.02R00 (for Printer & DICOM Server) Physical type: Ethernet Card 100 / 1000 Network protocol: TCP/IP DICOM conformance statement: Konica-Minolta, Printlink5-IN, Ver. 1.0 2006.10 Image memory: Printer: 64 MB; DS: 1 GB-RAM Hard disk: Printer: None; DS: 80 GB Printer Settings Web-Servicetool for Printlink 5 Configuration Parameter: select input channel in "Input Parameter Setup Screen" window:
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 193 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
194
Specific Camera Information - Konica Minolta Content
Printer Setting
Value
Input Channel
CT_hostname
Number of Copies
1
Print priority
LOW
Film destination
BIN_1
Film orientation
PORTRAIT
Magnification Type
CUBIC (checkbox selected)
Smooth Type
7 (checkbox selected)
Border density
BLACK
Min. Dens.
0.20
Max. Dens.:
3.00
Trim:
NO
Config. Information
KC_LUT=1 (checkbox selected)
Density
0
Contrast
0
Flip
NORMAL
Polarity
NORMAL
Medium type
BLUE FILM
Film Size ID
14" X 17"
Configuration LUT: select input channel in "LUT Setup Screen" window:
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 194 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta Content
195
Printer Setting
Value
Input Channel
CT_hostname
LUT No
1
Display Mode
16Step - Density
Drag Mode
One
Illumination
2000
Refl. Ambient
10
Basic Pattern
(linear LUT):
Previous Setting
1=20 / 2=39 / 3=57 / 4=76 / 5=95 / 6=113 / 7=132 / 8=151 / 9=169 / 10=188 / 11=207 / 12=225 / 13=244 / 14=263 / 15=281 / 16=300)
Test Image Convert
P-Value Convert
Polarity
NORMAL
Configuration Maintenance Host name
LENOVO-0B9651EF
IP address
xxx.xxx.xxx.xx
AE Title SCP
PLNK5
AE Title SCU
PLNK5
Port No.
104, 6000, 5200
select input channel in "Printlink 5 Maintenance" window: Input Channel
4
Input Name
CT_hostname
SCU IP-Adr.
xxx.xxx.xxx.xx
SCU AET title
PR_hostname
Protocol Name
DICOM PRINT IN
Maker
KonicaMinolta (1.03)
Model
RS
"double-click" Ch4, SOM64B Channel Name
CT_hostname
Default Channel (checkbox deselected)
© Siemens, 2010
Protocol Name
DICOM PRINT IN
Default Format
1x1
CT00-000.814.36.01.02 03.10
Page 195 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
196
Specific Camera Information - Konica Minolta Content
Printer Setting
Value
IP Adr./H. Name
xxx.xxx.xxx.xx
AE Title SCU
PR_hostname
Common Input ... ("not relevant for printing") DRYPRO 832 Output Setup: Luminance Conversion
ON
Border Size
CT/MRI
Format Type
EVEN
Pat.Name Stamp Type
OFF
DICOM PRINT IN N-Event Port No.
0
Empty Notice LV
Standard (checkbox selected)
Error Level
M/M Abort
Max PDU
64
Upper Stamp Use
OFF
Printlink 5 Maintenance IMAGER: "double click" Imager Ch1
DPRO832
Imager Output channel setup screen Channel Name
DPRO832
Protocol Name
DICOM PRINT OUT
IP-Adr./Hostname:
Localhost
DRYPRO832 IP-Adr.
xxx.xxx.xxx.xx
AET-SCP
KC_DRO4_P001
Port No
63101
Common Output
SOMATOM Definition AS
Connect Imager
DRYPRO832
Output Pixels
12bit
Convert LUT
ON
Stretch Base
No Stretch
Stretch Mode
BiLinear
CT00-000.814.36.01.02 03.10
Page 196 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta Content
Printer Setting
Value
Warning Out
ON
Layout
DcmPrtLayOut832.ini
Output Name
ASCII + KANJI + KANA
Output Image Color
Grayscale
Study Output Order
Normal
Annotation Box
Not send
197
Calculate Sampling Pitch (checkbox deselected)
Imager Default Setting: Default Film Size 1
14x17
Def. Media Type 1
BLUE FILM
Def. Film Type 2
11x14
Def. Media Type 2
BLUE FILM
Error / warning messages (examples) Action that Printer messages results in camSent by SCP (*2) era error mes- Defined DCS (*1) sages Film Jam
FILM JAM
Open cover and COVER OPEN no film is printing
Message displayed on SCU
FILM JAM
Film jam
Normal
* "nothing is displayed, no film is printed, all films are stored in the camera. After closing the cover all stored films were printed out.
10"x12" film Sup- EMPTY 10x12 BLUE EMPTY 10x12 BLUE 10x12 blue film supply ply empty empty Switch off cam- PRINTER DOWN era but Konica DICOM Server is running
© Siemens, 2010
CT00-000.814.36.01.02 03.10
PRINTER DOWN
Page 197 of 246 H WS CS SD SP/CV
Camera down
SOMATOM Definition AS
198
Specific Camera Information - Konica Minolta Action that Printer messages results in camSent by SCP (*2) era error mes- Defined DCS (*1) sages Send a film with not defined a size which is not inserted in camera (14"x17", 8"x10" inserted, 10"x12" is sent)
ELEC SWERROR
Message displayed on SCU ** Camera software problem - Queue stopped.
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality * In case of "Camera cover open", no message is displayed. If the camera is ready, jobs are queued only and not printed. ** If a film is not inserted and configured in the camera server, the queue is stopped with a camera software problem. This job must be deleted in the camera queue.
Image Quality and Optical Density
0
No specific parameter available. Real size scaling
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
390.0
391.5
0.38
14" x 17"
X
410.0
412.0
0.49
Landscape
Y
320.0
320.5
0.16
14" x 14"
X
300.0
301.0
0.33
Portrait
Y
300.0
301.0
0.33
14" x 14"
X
300.0
301.0
0.33
Landscape
Y
300.0
301.0
0.33
11" x 14"
X
250.0
250.0
0.00
Portrait
Y
320.0
321.0
0.31
11" x 14"
X
330.0
331.0
0.30
Landscape
Y
250.0
250.5
0.20
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 198 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
Film size / Direction
© Siemens, 2010
199
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
230.0
230.0
0.00
Portrait
Y
270.0
271.0
0.37
10” x 12”
X
270.0
271.0
0.37
Landscape
Y
220.0
220.5
0.23
8" x 10"
X
170.0
170.0
0.00
Portrait
Y
220.0
221.0
0.45
8" x 10"
X
230.0
231.0
0.43
Landscape
Y
170.0
170.0
0.00
CT00-000.814.36.01.02 03.10
Page 199 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
200
Specific Camera Information - Konica Minolta
Konica Minolta DryPro 793
6.2
General information
0
Block diagram
Fig. 26:
Available film sizes Format
Release status
Film type
Medium type
Portrait
Yes
DRYPRO SD-P
Blue-based
Landscape
Yes
DRYPRO SD-P
Blue-based
Portrait
Yes
DRYPRO SD-P
Blue-based
Landscape
Yes
DRYPRO SD-P
Blue-based
Portrait
Yes
DRYPRO SD-P New
Blue-based
Landscape
Yes
DRYPRO SD-P New
Blue-based
Portrait
Yes
DRYPRO SD-P
Blue-based
Landscape
Yes
DRYPRO SD-P
Blue-based
Portrait
Yes
DRYPRO SD-P
Blue-based
Landscape
Yes
DRYPRO SD-P
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 200 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
201
Performance and Connections Associations Maximum number of associations supported: 32 Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
105 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
The minimum density command is not supported. The minimum density value is the value of the fog on the film.
Known Effects n.a.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
HC Device / General settings Type Class (Printer spec. file name) DICOM Node
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
DPRO793
Yes
104
No
Display
Changes allowed
DICOM printer
No
konicaDryPro793_largeB
No
Konica793
Yes
Page 201 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
202
Specific Camera Information - Konica Minolta Filming properties
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
87.5 x 87.5
No
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
3902 x 4668 14" x 14" 3902 x 3799 11" x 14" 3044 x 3799 10” x 12” 2745 x 3219 8" x 10" 2160 x 2643
In “Define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
4725 x 3834
Delete only
14" x 14" 3856 x 3834 11" x 14" 3868 x 2988 10” x 12” 3275 x 2677 8" x 10" 2699 x 2092 Medium type Film destination Color appearance
Blue film
No
Processor
Yes
Gray scale 8 bit
No
Black
No
No magnification
No
Background Transformation
NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes that are not available at the customer site.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 202 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
203
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type: DICOM Printer (SCP) Device name: DRYPRO 793 Manufacturer: Konica Minolta Medical & Graphics, Inc. SW Revision: V1.00R05 Physical type: Ethernet 10 base-T / 100 base-TX / 1000 base-T Network protocol: TCP/IP DICOM Conformance Statement: Ver.1.02, 2005.02 Image memory: 512 MB Hard disk: 80 GB Printer settings The configuration has to be performed via the printer keypad. Konica Service has to install the modality name so that the printer settings can be assigned to this name. Switch to Service mode Select "Print" Mode Setting: Print Setting for CT modality
Value
LUT NO
LUT1: LINEAR
DENSITY
0
CONTRAST
0
SMOOTHING
7
MAX DENSITY
300
MIN DENSITY
20
LUMINOUS INTENSITY
2000
AMBIENT LIGHT
10
ROTATION
OFF
SORTER
1
ORIENTATION
PORTRAIT
IMAGE POLARITY
POSITIVE
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 203 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
204
Specific Camera Information - Konica Minolta Value
BORDER
BLACK
TRIM ON/OFF
OFF
STAMP
Setting: Print Setting for CT modality
TIME/DATE
(Not selected)
COPY NO.
(Not selected)
SCU ID/PAGE NO.
(Not selected)
STAMP MESSAGE
(Not selected)
PATIENT ID / NAME
(Not selected)
PATIENT DATA ASCII
(Not selected)
STAMP CONTENT
(EMPTY)
Setting: Print Setting for CT modality
Value
STAMP POSITION
EDGE ENHANCE
OFF
BORDER SIZE
CT/MRI
EXPANSION CHARACTER
OFF
MANAGE INFO. PRINT
ON
REQ.IMAGESIZE
EFFECTIVE
REQ:BEHAVIOR
DECIMATE
INTEGRAL MULTIPLE RATIO
2
P VALUE RECEPTION
OFF
FORMAT
EVEN
STANDARD DMIN/DMAX
DICOM
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 204 of 246 H WS CS SD SP/CV
© Siemens, 2010
DICOM Priority
Specific Camera Information - Konica Minolta DEFAULT LUT
(Not selected)
SMOOTH
(Not selected)
DENSITY MAX
(Not selected)
DENSITY MIN
(Not selected)
POLARITY
(Not selected)
ORIENTATION
(Not selected)
TRIM
(Not selected)
BORDER
(Not selected)
SORTER
(Not selected)
205
Select “Service 1” Mode Setting: SCU SETUP for CT modality
Value
CHANNEL USE
ON
SCU NAME
CT-hostname
IP ADDRESS
xxx.xxx.xxx.xxx
HOST NAME
CT-hostname
PORT NUMBER
104
AE TITLE
PR_hostname
ERROR LEVEL
STANDARD
SIZE TYPE CHECK
ON
ENFORCE SPECIFIC FILM
OFF
STANDARD MAGAZINE
14x17B
EMPTY NOTICE SIZE TYPE 14x17B
ON
SIZE TYPE 8x10B
ON
SIZE TYPE 10x12B
ON
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 205 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
206
Specific Camera Information - Konica Minolta Error / Warning Messages (examples) Action that Printer messages results in camSent by SCP (*2) era error mes- Defined DCS (*1) sages Switch to service CHECK PRINTER mode
CHECK PRINTER
Message displayed on SCU Check camera
14x17 Magazine EMPTY 14x17 BLUE EMPTY 14x17 BLUE 14x17 blue film supply empty empty Front door open
CHECK PRINTER
CHECK PRINTER
Check camera
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available. Real size scaling
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.5
0.15
Portrait
Y
390.0
390.0
0.00
14" x 17"
X
400.0
400.0
0.00
Landscape
Y
320.0
321.0
0.31
14" x 14"
X
330.0
330.5
0.15
Portrait
Y
320.0
320.0
0.00
14" x 14"
X
330.0
330.0
0.00
Landscape
Y
320.0
320.5
0.16
11" x 14"
X
250.0
250.0
0.00
Portrait
Y
320.0
320.5
0.16
11" x 14"
X
330.0
330.5
0.15
Landscape
Y
250.0
250.0
0.00
10” x 12”
X
230.0
230.0
0.00
Portrait
Y
270.0
270.5
0.19
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 206 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
Film size / Direction
© Siemens, 2010
207
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
270.0
270.5
0.19
Landscape
Y
220.0
220.0
0.00
8" x 10"
X
170.0
170.0
0.00
Portrait
Y
220.0
220.5
0.23
8" x 10"
X
230.0
230.0
0.00
Landscape
Y
180.0
180.0
0.00
CT00-000.814.36.01.02 03.10
Page 207 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
208
Specific Camera Information - Konica Minolta
Konica Minolta DryPro 771
6.3
General information
0
Block diagram
Fig. 27:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DRYPRO SD-P
Blue-based
Landscape
Yes
DRYPRO SD-P
Blue-based
Portrait
Yes
DRYPRO SD-P
Blue-based
Landscape
No
No
No
Portrait
Yes
DRYPRO SD-P New
Blue-based
Landscape
Yes
DRYPRO SD-P New
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 208 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
209
Performance and Connections Associations Maximum number of associations supported: 16 Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
112 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
14INX14IN landscape not supported by camera.
Known Effects n.a.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
HC Device / General settings Type Class (Printer spec file name) DICOM Node
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
DP771
Yes
104
No
Display
Changes allowed
DICOM printer
No
konicaDyPro771_largeB
No
KonicaDP771
Yes
Page 209 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
210
Specific Camera Information - Konica Minolta Filming properties
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
78.6 x 78.6
No
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4350 x 5202 14" x 14" 4350 x 4236 11" x 14"
In “define new” Do not modify/add
3384 x 4236
Select only Delete only
Film Sheet Formats,
Number of Pixels
14" x 17"
Landscape
[columns x rows]
5318 x 4236 11" x 14" 4310 x 3282
Medium type
Blue film
No
Processor
Yes
Grayscale 8 bit
No
Black
No
No magnification
No
Film destination Color appearance Background Transformation
NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type: DICOM Printer (SCP) Device name: DRYPRO MODEL 771 Manufacturer: KonicaMinolta SW Revision: V1.00R03 Physical type: RJ45
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 210 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
211
Device type: DICOM Printer (SCP) Network protocol: DICOM, TCP/IP DICOM Conformance Statement: Vers. 1.00, Sep.01. 2003 Image memory: 128 MB / Standard Hard disk: 80 GB / Standard Printer settings The configuration has to be performed via the printer keypad. Konica service has to install the modality name and assign it to a channel number. For this camera validation, the modality name "specific Modality name" is installed and assigned to channel: "CH3". Use Maintenance Mode to view/modify Print Server Configuration. Select U30 Print Cond. Select CH3 "specific modality name" Enter
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 211 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
212
Specific Camera Information - Konica Minolta Variable name
Content
LUT NO
1 LINEAR
DENSITY
0
CONTRAST
0
SMOOTHING
2
MAX DENSITY
300
MIN DENSITY
20
ORIENTATION
PORTRAIT
IMAGE POLARITY
POSI
TRIM ON/OFF
Off
BORDER
Black
ILLUMINATION
2000
AMBIENT LIGHT
10
Exit Select U90 - Password Enter INPUT PASSWORD Enter Select U80 Service Mode S00 DICOM SCU displayed Select CH3 "specific modality name" Enter
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 212 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta Variable name
Content
CHANNEL USE
ON
SCU NAME
CT-hostname
N-EVENT PORT NO
BORD=0
IP ADDRESS
xxx.xxx.xxx.xxx
AE TITLE
PR_hostname
HOST NAME
CT-hostname
BORDER SIZE
REGIUS
FILM SIZE TYPE
NO CHECK
EMPTY NOTICE
ON
DICOM ERROR LEVEL
STANDARD
FRAME LAYOUT
EVEN
Dmax/Dmin
DICOM
P-VALUE RCV
OFF
213
Exit Select S30 DICOM PRIORITY Select CH3 "specific modality name" Enter Variable name
Content
DEFAULT LUT
DICOM
SMOOTH
DICOM
DMAX
DICOM
DMIN
DICOM
POLARITY
DICOM
ORIENTATION
DICOM
TRIM
DICOM
BORDER
DICOM
Exit Select S20 Print Cond. Select CH3 "specific modality name" Enter S21 STAMP SELECT
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 213 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
214
Specific Camera Information - Konica Minolta Variable name
Content
TIME/DATE
OFF
Copy no.
OFF
Patient ID
OFF
SCU ID / Page
OFF
STAMP MESSAGE
OFF
STAMP MESSAGE STAMP DIRECTION
LOWER
YEAR/FORMAT
YY
MONTH/FORMAT
TEXT
DATE/FORMAT
TIME+DATE
REQ.IMAGESIZE
EFFECTIVE
EXPANSION CHAR
OFF
EDGE ENHANCE
OFF
REQ:BEHAVIOR
DECIMATE
FLIP ON/OFF
OFF
Exit Data was changed Save the data? Yes Enter Exit Error / Warning Messages (examples) Action that results in Printer messages camera error mesDefined DCS (*1) Sent by SCP sages
Message displayed on SCU (*2)
14x17 Magazine empty EMPTY 14x17 BLUE
EMPTY 14x17 BLUE
14x17 blue film supply empty
Front door open
CHECK PRINTER
Check camera
CHECK PRINTER
Check camera
COVER OPEN
Switch to service mode n.a.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 214 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta Action that results in Printer messages camera error mesDefined DCS (*1) Sent by SCP sages
215
Message displayed on SCU (*2)
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.5
0.15
Portrait
Y
400.0
401.0
0.25
14" x 17"
X
410.0
411.0
0.24
Landscape
Y
320.0
320.5
0.16
14" x 14"
X
330.0
330.0
0.00
Portrait
Y
320.0
321.0
0.31
14" x 14"
X
No
No
No
Landscape
Y
No
No
No
11" x 14"
X
250.0
250.0
0.00
Portrait
Y
320.0
320.5
0.16
11" x 14"
X
330.0
330.5
0.15
Landscape
Y
250.0
250.5
0.20
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
CT00-000.814.36.01.02 03.10
Page 215 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
216
Specific Camera Information - Konica Minolta
Konica DryPro 751/752
6.4
General information
0
Block diagram
Fig. 28:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
DRYPRO SD-P New
Blue-based
Landscape
Yes
DRYPRO SD-P New
Blue-based
Portrait
Yes
DRYPRO SD-P
Blue-based
Landscape
Yes
DRYPRO SD-P
Blue-based
Portrait
Yes
DRYPRO SD-P New
Blue-based
Landscape
Yes
DRYPRO SD-P New
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 216 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
217
Performance and Connections Associations Maximum number of associations supported: 16 Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
98 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
Known Effects n.a.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
HC Device /
0
Display
Changes allowed
DPRO752
Yes
104
No
Display
Changes allowed
DICOM printer
No
konicaDryPro752
No
DPRO752
Yes
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
No
General settings Type Class (Printer spec file name) DICOM Node
Filming properties
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 217 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
218
Specific Camera Information - Konica Minolta Filming properties Pixel Size [1/1000 mm]
Display
Changes allowed
80.0 x 80.0
No
Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4272 x 5112 14" x 14" 4272 x 4162 11" x 14" 3336 x 4162
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5224 x 4162
Delete only
14" x 14" 4272 x 4162 11" x 14" 4274 x 3224 Medium type
Blue film
No
Processor
Yes
Grayscale 8 bit
No
Black
No
No magnification
No
Film destination Color appearance Background Transformation NOTE
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Device type: DICOM Printer (SCP) Device name: DRYPRO 752 Manufacturer: Konica SW Revision: V1.00R7 Physical type: Ethernet RJ45 10/100 Base TX Network protocol: TCP/IP
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 218 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
219
Device type: DICOM Printer (SCP) DICOM Conformance Statement: V 1.03, Jun.18.2003 Image memory: 256 MB RAM Hard disk: 20 GB Printer settings File Name
STAMP SELECT
© Siemens, 2010
Parameters
Content
Maintenance
1/3
Print Condition
CT host name
LUT
LINEAR
DENSITY
0
CONTRAST
0
SMOOTH TYPE
7
MAX DENSITY
300
MIN DENSITY
020
L0
0
La
0
SORTER BIN
01
ORIENTATION
Portrait
POLARITY
Posi
TRIM
Off
BORDER
Black
FLIP
Off
DATE TIME
No
Copy no.
No
Patient ID
No
SCU ID/page no.
No
CT00-000.814.36.01.02 03.10
Page 219 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
220
Specific Camera Information - Konica Minolta File Name
SOMATOM Definition AS
Parameters
Content
STAMP MESSAGE
No
STAMP DIRECTION
Stamp position in graphic: top
Maintenance
2/3
SERVICE
n.a.
DICOM SCU
CT hostname
SCU SETUP
n.a.
SCU CH USE
ON
SCU NAME
CT hostname
N-EVENT PORT NO
0
IP ADDRESS
xxx.xxx.xxx.xxx
AE TITLE
PR_hostname
HOST NAME
CT hostname
SIZE TYPE CHECK
ON
BORDER SIZE
REGIUS
EMPTY NOTICE
n.a.
14x17 B
ON
14x14 B
ON
EDGE ENHANCE
ON
FRAME LAYOUT
CENTER
DICOM ERROR LEVEL
STANDARD
DEFAULT Dmax/Dmin
DICOM
Magnification
02
CT00-000.814.36.01.02 03.10
Page 220 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information - Konica Minolta
221
Error / Warning Messages (examples) Action that results in Printer messages camera error mesDefined DCS (*1) Sent by SCP sages Camera switched off
n/a
Message displayed on SCU (*2)
TCP init error, tim- Connection to camera eout is not available
14x17 Magazine empty EMPTY 14x17 BLUE
EMPTY 14x17 BLUE
14x17 blue film supply empty
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
© Siemens, 2010
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
331.0
0.30
Portrait
Y
380.0
381.0
0.26
14" x 17"
X
400.0
401.0
0.25
Landscape
Y
320.0
321.0
0.31
14" x 14"
X
330.0
331.0
0.30
Portrait
Y
320.0
321.0
0.31
14" x 14"
X
330.0
331.0
0.30
Landscape
Y
320.0
321.0
0.31
11" x 14"
X
250.0
251.0
0.40
Portrait
Y
320.0
321.0
0.31
11" x 14"
X
330.0
331.0
0.30
Landscape
Y
240.0
241.0
0.42
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
CT00-000.814.36.01.02 03.10
Page 221 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
222
Specific Camera Information - Konica Minolta
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 222 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony
223
7-
SONY UP-DF 750
0
General information
0
7Specific Camera Information Sony
Block Diagram
Fig. 29:
Available Film Sizes Format
Released
Film type
Medium type
Portrait
Yes
UPT-517BL
Blue-based
Landscape
Yes
UPT-517BL
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
Yes
UPT-514BL
Blue-based
Landscape
Yes
UPT-514BL
Blue-based
Portrait
Yes
UPT-512BL
Blue-based
Landscape
Yes
UPT-512BL
Blue-based
Portrait
Yes
UPT-510BL
Blue-based
Landscape
Yes
UPT-510BL
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 8
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 223 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
224
Specific Camera Information Sony Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimum connection (point to point) was used. Time
100 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
No error message is sent if film size of job to be printed is not inserted in camera.
NOTE
Horizontal lines visible in the grey field image are due to the MTF pattern, with horizontal black and white lines.
Known effects NOTE
For accurate measurement of UPT-51xBL (x=0, 2, 4, 7) films, an X-Rite 301X densitometer with 301-34-SO special conversion optics has to be used.
SCU / modality software configuration Application entity Properties AE title Port number
HC device/ General settings Type Class (printer-spec. file name) DICOM Node
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
UPDF750
Yes
104
No
Display
Changes allowed
DICOM printer
No
SonyUPDF750
No
SONY 750
Yes
Page 224 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony
225
Filming properties
Display
Changes allowed
Hold printed film jobs
10
Yes
Min. density
20
Yes
84.1 x 84.1
No
Pixel size [1/1000 mm] Film sheet formats:
Number of pixels
14" x 17"
Portrait
[columns x rows]
4128 x 4944 11” x 14” 3232 x 4048 10” x 12” 2928 x 3432 8” x 10” 2320 x 2840
In “Define new” Do not modify/add
Film sheet formats:
Number of pixels
14" x 17"
Select only
Landscape
[columns x rows]
4944 x 4128
Delete only
11” x 14” 4048 x 3232 10” x 12” 3432 x 2928 8” x 10” 2840 x 2320 Medium type Film destination Color appearance
Blue film
No
Processor
No
Gray scale, 8-bit
No
Black
Yes
Replicate
No
Background Transformation
NOTE
Do not modify or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 225 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
226
Specific Camera Information Sony
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Manufacturer / device type:
DICOM printer (SCP)
Device name: UP-DF750 Manufacturer: SONY SW revision: MA App: V1.01, MA LD: V1.02, MA BO: V0.19, CT: V1.00, ICTAG: V1.00 / DICOM V4.04-R21 Physical interface: Ethernet 10/100 Base T/Tx Network protocol: TCP/IP DICOM conformance statement: SONY UP-DF750, Rev. 1.2, Feb. 05, 2009 Image memory: 3.5 GB Hard disk: None Released printer settings Keypad settings: Press
• INFORMATION> - IP ADDRESS XXXX Network address - TOTAL PRINTS ***
• PRINT QUALITY> - Standard film Gamma - 1-5: SONY xx - 6: LIN280 > - 7: LIN300 > - 8: LIN_300 > Gamma_table 8: Linear LUT up to 3.0 - 9: AX300 > - 10: FLC300 > - 11-20: SONY xx > - Mammo film > Gamma >
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 226 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony -
227
1-15: SONY xx > 16: LIN_350 > 17: LIN1 > 18:LIN2 > Gamma table 18: Linear LUT for 3.5 19, 20: SONY xx >
• SHARPNESS OFF • PATTERN PRINT - 1: 14x17 [EXEC] - 2: 11x14 [EXEC]
• POINT 95% 25
• POINT 5% 75 Save Gamma> Save? [EXEC]
• Calibration> - Full range calibration 1: 14x17 [EXEC] 2: 11x14 [EXEC] - Auto calibration [On/Off] - Calibration reset
• Default Gamma> - 14x17 Lin. LUT up to 3.0 8: LIN_300 - 11x14 Lin. LUT up to 3.0 8: LIN_300 - 10x12 Lin. LUT up to 3.0 8: LIN_300 - 8x10 Lin. LUT up to 3.0 8: LIN_300 - 10x12M Lin. LUT up to 3.5 18: LIN2 - 8x10M Lin. LUT up to 3.5 18: LIN2 SYSTEM SETTINGS>
• NETWORK SETTINGS> • Preset 1
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 227 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
228
Specific Camera Information Sony • Access of DICOM Configuration Tool via Web Tool for standard and high resolution: http://xxx.xxx.xxx.xxx/PrinterSetup/PrinterSetup.exe/ConnectivityCustomizing
• LOAD DELETE AE Title UPDF750 SAVE AE Title UPDF750 Call type: Called (selected), Calling (deselected) Partial matching (deselected) Always use Mammo Media (deselected) Replace CUBIC with (deselected) CUBIC_SH Parameter 0 -100 (5) CUBIC_VR Parameter 0 -100 (70)
• Basic Film Session SOP Class N-CREATE/N-SET Default Medium type: BLUE FILM Number of copies: 1
• Basic Film Box SOP Class N-CREATE/N-SET Default Film orientation PORTRAIT Film size ID 14INX17IN Magnification type NONE Border Density BLACK, WHITE, or 20 - 380 Empty Image Density 20 - 380 Trim NO Configuration Information 8 .............A, N, W, and 1 - 36 (1) Illumination 1 - 4000 (2000) Reflected Ambient Light 1 - 100 (10) Max Density 20 -380 (320) Override (deselected) Min Density 20 -380 (20) Override (deselected)
• Warning 0116H Warning Film Size ID (selected) Medium Type (selected) Number of Copies (selected) Image Display Format (selected) Annotation Display Format ID (selected) Configuration Information (selected) Image Position (selected) Bits Allocated (selected) Bits Stored (selected)
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 228 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony
229
• B605H Warning Max Density (selected) Min Density (selected)
• B604H/B609H Warning B604H Warning (selected) B609H Warning (selected)
• Print behavior for unsupported/unavailable film size ID/Medium Type Supported Film Size ID/Medium Type 8x10 NORMAL (selected) 8x10 MAMMO (deselected) 10x12 NORMAL (selected) 10x12 MAMMO (deselected) 11x14 NORMAL (selected) 14x17 NORMAL (selected)
• Accept unsupported/unavailable Accept unsupported Film Size ID/Medium Type (deselected) Accept unavailable Film Size ID/Medium Type (selected)
• Process: QUEUE Priorities: Film Size ID or Medium Type: FILM SIZE ID Film Size ID: BIGGER
Error / warning messages Camera warning or error messages
Printer message Defined DCS (*1)
Sent by SCP
Message displayed on SCU (*2)
Open the cover on top of the camera
COVER OPEN
COVER OPEN
Camera cover, drawer or door open
One supply magazine is pulled out
NO SUPPLY MGZ
NO SUPPLY MGZ
Film supply not available
14”x17” magazine contains only 1 film, two jobs of film size 14”x17” are sent.
EMPTY 14x17 BLUE
EMPTY 14x17 BLUE
14" x 17" blue film supply empty
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 229 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
230
Specific Camera Information Sony Camera warning or error messages
Printer message Defined DCS (*1)
Camera has magaNORMAL zines with 8"x10" and 14"x17" film sizes inserted; one job for 11"x14" film size is sent.
Sent by SCP NORMAL
Message displayed on SCU (*2) Camera is ready
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality NOTE
No error message is sent if film size of job to be printed is not inserted in camera.
Image quality and optical density
0
No specific parameters available Real size scaling
Film size/orientation
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
300.0
299.5
0.17
Portrait
Y
400.0
398.0
0.50
14" x 17"
X
400.0
398.0
0.50
Landscape
Y
300.0
299.5
0.17
14" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
14" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
11" x 14"
X
240.0
239.5
0.21
Portrait
Y
300.0
298.5
0.50
11" x 14"
X
300.0
298.5
0.50
Landscape
Y
240.0
239.5
0.21
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 230 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony
Film size/orientation
© Siemens, 2010
231
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
10” x 12”
X
200.0
199.5
0.25
Portrait
Y
260.0
259.0
0.38
10” x 12”
X
260.0
259.0
0.38
Landscape
Y
200.0
199.5
0.25
8" x 10"
X
160.0
160.0
0.00
Portrait
Y
220.0
219.5
0.23
8" x 10"
X
220.0
219.5
0.23
Landscape
Y
160.0
160.0
0.00
CT00-000.814.36.01.02 03.10
Page 231 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
232
Specific Camera Information Sony
Sony UP-DF 550
7.1
General information
0
Block diagram
Fig. 30:
Available film sizes Format
Release status
Film Type
Medium type
Portrait
Yes
UPT-517BL
Blue-based
Landscape
Yes
UPT-517BL
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
Yes
UPT-514BL
Blue-based
Landscape
Yes
UPT-514BL
Blue-based
Portrait
Yes
UPT-512BL
Blue-based
Landscape
Yes
UPT-512BL
Blue-based
Portrait
Yes
UPT-510BL
Blue-based
Landscape
Yes
UPT-510BL
Blue-based
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 8
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 232 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony
233
Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, format 4x5, Copies=1, default center/width, magnification type none. The optimal connection (point to point) was used. Time
112 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
Horizontal line structure visible with all film sizes.
NOTE
Background of film is always white.
Known Effects NOTE
The UPT-517BL film type requires a specific densitometer characteristic. Density measurements using the X-Rite 301 densitometer are only possible if special optics 301-34SO are installed on the X-Rite 301 and calibrated as described in the X-Rite letter.
NOTE
If a film size is sent to the camera and the required film size is not inserted in the camera, then nothing is displayed, neither in Somaris nor on the camera display. Jobs stay in the queue until the required magazine is inserted. If an attempt is made to switch off the camera before all jobs are printed, the unprinted jobs are displayed - and the camera is not switched off.
SCU / Modality Software Configuration Application Entity Properties AE Title Port number
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
UPDF550
Yes
104
No
Page 233 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
234
Specific Camera Information Sony HC Device /
Display
Changes allowed
DICOM printer
No
SonyUPDF550
No
DICOM Node
Sony550
Yes
Filming properties
Display
Changes allowed
Hold printed Film Jobs
10
Yes
Min. density
20
Yes
79.4 x 79.4
No
General settings Type Class (Printer spec file name)
Pixel Size [1/1000 mm] Film Sheet Formats,
Number of Pixels
14" x 17"
Portrait
[columns x rows]
4360 x 5232 11” x 14” 3426 x 4286 10” x 12” 3100 x 3630 8” x 10” 2452 x 3004
In “define new” Do not modify/add
Film Sheet Formats,
Number of Pixels
14" x 17"
Select only
Landscape
[columns x rows]
5232 x 4360
Delete only
11” x 14” 4286 x 3426 10” x 12” 3630 x 3100 8” x 10” 3004 x 2452 Medium type Film destination Color appearance Background Transformation
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Blue film
No
Processor
No
Grayscale 8 bit
No
Black
Yes
No magnification
No
Page 234 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony NOTE
235
Do not modify and/or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / Hardcopy Camera Configuration (provided by OEM)
0
Identification Manufacturer / device type:
DICOM Printer (SCP)
Device name: Film Station UP-DF 550 Manufacturer: SONY SW Revision: MA-FW: 1.07 TST1; DICOM: V3.21; DR-FW: V1.01; CT-FW: V1.00, ICTAC: V1.00; IDMAC: V25.0 Physical Interface: Ethernet 10/100 base T/Tx Network protocol: TCP/IP DICOM Conformance Statement: Sony UP-DF550, Rev. 1.1, Feb.19, 2007 Image memory: 3.5 GB Hard disk: No
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 235 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
236
Specific Camera Information Sony Printer settings File Name
Content
No file;
Information>
Keypad settings, press "Menu”
IP ADDRESS xxx.xxx.xxx.xxx
No file;
PRINT Quality>
Keypad settings, press "Menu"
SELECT GAMMA
Remarks
Network address
TOTAL PRINTS
/SL32_14C/ [EXEC] SHARPNESS
Gamma table 8 (Linear LUT)
OFF
PATTERN PRINT 1: 14x17 [EXEC] SELECT POINT 95%.....[25%] SELECT POINT 5%.....[75%] SAVE GAMMA [EXEC] No file;
CALIBRATION>
Keypad settings, press "Menu"
FULL RANGE CAL 1: 14x17 [EXEC] AUTO CALIBRATION [On/Off] CAL RESET 14x17 [EXEC]
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 236 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony File Name
237
Content
No file;
GAMMA SEL>
Keypad settings, press "Menu"
DEFAULT14x17
Remarks
Linear LUT
/SL32_14C/ DEFAULT11x14
Linear LUT
/SL32_14C/´ DEFAULT10x12
Linear LUT
/SL32_14C/ DEFAULT 8x10 /SL32_14C/
Linear LUT
No file;
SYSTEM SETTINGS>
Keypad settings, press "Menu"
NETWORK SETTINGS> Network address
IP ADDRESS xxx.xxx.xxx.xxx
Subnet mask
SUBNETMASK xxx.xxx.xxx.xxx
Default Gateway
DEFAULT Gateway xxx.xxx.xxx.xxx STRICT SIZE .. ON SAVE SETTINGS >EXEC
ON = job stored if film size is not available
Error / Warning Messages (examples) Camera warning or error messages Cover or door of camera open
Printer message Defined DCS (*1)
COVER OPEN
Camera cover, drawer or door open
Supply magazine not NO SUPPLY MGZ inserted
NO SUPPLY MGZ
Film supply not available
Supply magazine empty
EMPTY 14X17 BLUE
EMPTY 14X17 BLUE
14x17 blue film supply empty
Film jam
FILM JAM
FILM JAM
Film jam
© Siemens, 2010
COVER OPEN
Sent by SCP
Message displayed on SCU (*2)
CT00-000.814.36.01.02 03.10
Page 237 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
238
Specific Camera Information Sony Camera warning or error messages
Printer message Defined DCS (*1)
Magazines with Nothing 14x17 and 8x10 films inserted, a job with film size 11x14 is sent
Sent by SCP NORMAL
Message displayed on SCU (*2) Nothing is displayed, neither in Somaris nor on the camera display. Jobs stay in queue until the 11x14 magazine is inserted. If an attempt is made to switch off the camera before all jobs are printed, the unprinted jobs are displayed and the camera is not switched off.
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
320.0
320.0
0.00
Portrait
Y
400.0
399.5
0.12
14" x 17"
X
400.0
399.5
0.12
Landscape
Y
320.0
320.0
0.00
14" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
14" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
11" x 14"
X
260.0
260.0
0.00
Portrait
Y
320.0
319.2
0.25
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 238 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony
Film size / Direction
© Siemens, 2010
239
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
11" x 14"
X
320
319.0
0.31
Landscape
Y
260.0
260.0
0.00
10” x 12”
X
240.0
239.8
0.08
Portrait
Y
260.0
259.5
0.19
10” x 12”
X
280.0
279.5
0.18
Landscape
Y
220.0
220.0
0.00
8" x 10"
X
180.0
180.0
0.00
Portrait
Y
220.0
218.8
0.55
8" x 10"
X
220.0
218.8
0.55
Landscape
Y
180.0
180.0
0.00
CT00-000.814.36.01.02 03.10
Page 239 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
240
Specific Camera Information Sony
Sony UP-DF 500
7.2
General Information
0
Block Diagram
Fig. 31:
Available Film Sizes Format
Release status
Film type
Medium type
Portrait
Yes
UPT-517BL
Blue-based
Landscape
Yes
UPT-517BL
Blue-based
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
Portrait
n.a.
n.a.
n.a.
Landscape
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
14" x 17"
14" x 14"
11" x 14"
10" x 12"
8" x 10" Other
Released: Yes
- Film size is available and released
Released: No
- Film size is available but not released
Released: n.a.
- Film size is not available
Performance and Connections Associations Maximum number of associations supported: 8
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 240 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony
241
Performance Use medical image 4 of patient "Reference Images", maximum film size, positive image, 4x5 format, Copies=1, default center/width, magnification type none. The optimum connection (point to point) was used. Time
133 sec.
Restrictions NOTE
For HCC-independent restrictions, refer to (Restrictions and known effects / p. 8).
NOTE
Line structure is visible. 3% modulation is visible with a lense only.
Known effects NOTE
The UPT-517BL film type requires a specific densitometer characteristic. Density measurements using the X-Rite 301 densitometer are only possible if special optics 301-34SO are installed on the X-Rite 301 and calibrated as described in the X-Rite letter.
SCU / modality software configuration Application Entity Properties AE Title Port number
HC Device / General settings Type Class (Printer spec file name) DICOM Node
© Siemens, 2010
CT00-000.814.36.01.02 03.10
0
Display
Changes allowed
UPDF500
Yes
104
No
Display
Changes allowed
DICOM printer
No
SonyUPDF500
No
Sony UP_DF500
Yes
Page 241 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
242
Specific Camera Information Sony Filming properties
Display
Changes allowed
Hold printed film jobs
10
Yes
Min. density
20
Yes
79.4 x 79.4
No
Pixel Size [1/1000 mm] Film sheet formats,
Number of pixels
14" x 17"
Portrait
[columns x rows]
4224 x 5060
Film sheet formats,
Number of pixels
14" x 17"
Select only
Landscape
[columns x rows]
5060 x 4224
Delete only
Medium type
No
Processor
No
Gray scale 8 bit
No
Black
Yes
No magnification
No
Background Transformation
NOTE
Do not modify/add
Blue film
Film destination Color appearance
In “define new”
Do not modify or add film sizes. Do not modify pixel sizes. Delete film sizes not available at the customer site.
SCP / hardcopy camera configuration (provided by OEM)
0
Identification Manufacturer / device type:
DICOM Printer (SCP)
Device name: Film Station UP-DF 500 Manufacturer: SONY SW Revision: MA: 4.00 DR: 4.02 CT: 2.00 IDMAC: 25.0 ICTAG: 1.00 DICOM: 3.21 Physical interface: Ethernet (RJ45) Network protocol: TCP/IP
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 242 of 246 H WS CS SD SP/CV
© Siemens, 2010
Specific Camera Information Sony Manufacturer / device type:
243
DICOM Printer (SCP)
DICOM conformance statement: Rev. 2.0, May 21, 2003. Image memory: 12 GB Hard disk: 20 GB Printer Setting File Name
Content
Remarks
No file;
Information>
Keypad settings, press "Menu"
IP ADDRESS xxx.xxx.xxx.xxx
No file;
PRINT Quality>
Keypad settings, press "Menu"
SHARPNESS
OFF
Network address
Interpolation
GAMMA SEL Default GAMMA SL32_14C
Linear LUT
No file;
Density ADJ>
Keypad settings, press "Menu"
SELECT POINT 95% ...[25]
(for MA3.04)
95%...[9]
(for MA4.00)
5 % ...[75] Error / warning messages (examples) Camera warning or error messages Cover or door of camera open
Printer message Defined DCS (*1) COVER OPEN
Sent by SCP
Message displayed on SCU (*2)
COVER OPEN
Camera cover, drawer or door open
Supply magazine not NO SUPPLY MGZ inserted
NO SUPPLY MGZ
Film supply not available
Supply magazine empty
EMPTY 14X17 BLUE
EMPTY 14X17 BLUE
14x17 blue film supply empty
Film jam
FILM JAM
FILM JAM
Film jam
(*1) refer to all messages in the DCS of the hardcopy camera (*2) refer to all messages in the DCS of the modality
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 243 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
244
Specific Camera Information Sony
Image Quality and Optical Density
0
No specific parameter available Real Size Scaling
Film size / Direction
Desired (mm)
Measured (mm)
Deviation obtained from desired value in %
14" x 17"
X
330.0
330.0
0.00
Portrait
Y
380.0
378.5
0.39
14" x 17"
X
390.0
388.5
0.38
Landscape
Y
320.0
320.0
0.00
14" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
14" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
11" x 14"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
11" x 14"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
10” x 12”
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Portrait
Y
n.a.
n.a.
n.a.
8" x 10"
X
n.a.
n.a.
n.a.
Landscape
Y
n.a.
n.a.
n.a.
SOMATOM Definition AS
CT00-000.814.36.01.02 03.10
Page 244 of 246 H WS CS SD SP/CV
© Siemens, 2010
Changes to Previous Version 8Changes to Previous Version
245
8-
Initial Version
© Siemens, 2010
CT00-000.814.36.01.02 03.10
Page 245 of 246 H WS CS SD SP/CV
SOMATOM Definition AS
246
SOMATOM Definition AS
Changes to Previous Version
CT00-000.814.36.01.02 03.10
Page 246 of 246 H WS CS SD SP/CV
© Siemens, 2010
View more...
Comments
