2/4/2017
Creating a New Project Petrel 2010 Petrel Manual Material de Estudo
Comunidade Acadêmica
Perguntas e Respostas
Login
Buscar arquivos, pessoas, cursos…
Cadastro
Creating a New Project Petrel 2010 Ebah - Rede Acadêm…
Enviado por: Jotavio Gomes | 1 comentários Arquivado no curso de Engenharia Geofísica na UnB
Seguir
+1
+ 9.291 Download
Tweet
Curtir
2 Curtir
Compartilhar 109 mil pessoas curtiram isso.
(Parte 1 de 2) Knowledge Worth Sharing Petrel TIPS&TRICKS from SCM 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] Petrel is a mark of Schlumberger © 2011 SCM E&P Solutions, Inc. Creating a New Petrel Project When a user starts a new project (i.e. a brand new project, not a project copied from another person), there are a few tasks that must be performed before any data loading begins. Sometimes (depending on the company), data is pre‐ loaded from a database, but often the project is "blank" and the user must begin from a new Petrel project. When this
DESCRIÇÃO
Petrel Manual
TAGS Petrel seismic interpretation
happens, the following items may be needed: ESTATÍSTICAS
Becoming familiar with Petrel files Getting a Petrel license Petrel Main Window
3610 visitas 14 downloads 1 comentários
Create a new project ARQUIVOS SEMELHANTES
Project Settings
Manual MS Project Manual basico sobre o project
System Settings Other Settings Petrel Files
Apostila Project 2007 project 2007
Petrel projects always have at least one .pet file and one .ptd folder to define and contain the files for the project. The .pet file (a file with a suffix of .pet) controls the project and contains information which allows Petrel to find the needed
apostila ms project 2007
data in the .ptd folder. The .pet file and the .ptd folder must have the exact same name to the left of the period. The .ptd
apostila ms project
folder contains hundreds or thousands of files with meaningless (except to Petrel) names. Always choose the .pet file when accessing a project. A second file type is .bak. This is a backup of the .pet file created by Petrel. Petrel normally creates this file when you save your project. If the project is corrupted (for whatever reason), delete the .pet file and rename the .bak file to .pet and hopefully you won't have lost too much data and time. A good habit to have is to save your entire Petrel project to a different name periodically (every day, week, etc. ‐ your choice) so that if the project is
Apostila Ms Project 2007 Apostila Ms Project 2007
completely corrupted, you have a backup. The final Petrel file type is .lock. This file is created when someone has a Petrel project open. Its existence doesn't allow anyone else to access the Petrel project. Two users of the same Petrel project will almost guarantee that the project is corrupted.
Apostila 02 project 2007 MS Project 2007
Ms project Manual para iniciantes em Ms Project
Guia Microsoft Project Guia do Microsoft Project
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
1/10
2/4/2017
Creating a New Project Petrel 2010 Petrel Manual
Apostila MS Project 2010 Material de apoio do curso do MS Project 2010. Bem didático e de fácil compreensão.
Project 2007 Programa de Projetos e Planejamento.
Project 2007 Petrel is a mark of Schlumberger
Material bom para quem deseja dominar o Offce Project
4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc.
LIVROS RELACIONADOS
The following picture shows two Petrel projects:
Manual de Filosofia Política
A‐GF‐Input Data_DPM3 and H‐GF‐Completed Model
O Manual de Filosofia Política para os cursos de Teoria do Estado e Ciência Política, Filosofia...
The project A‐GF‐Input Data_DPM3 is open because a .lock file exists.
Eduardo Sabbag Manual de Direito Tributário
Petrel License
Manual de Direito Tributário se destina aos operadores do Direito em geral, com ênfase...
Every user accessing Petrel must have a license for the program. A license may contain access to all or only parts of Petrel. When Petrel starts, the following window appears with the following main parts:
Upstream Inglês Instrumental Petróleo e Gás
1. The License Package name 2. The number of available licenses 3. The number of total licenses for this package 4.
UPSTREAM: Inglês instrumental ? Petróleo e gás é uma obra dedicada ao ensino de Inglês...
The package options
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. To access a Petrel license, choose a license package that has the options needed. Also make sure a license is available for that package. If none are available, see if another license package has the needed options. Highlight the package name and click OK. For example, if you are going to do Seismic Interpretation, make sure the license includes that option. Most companies have fewer licenses for Seismic Interpretation than general licenses. If you aren’t going to do Seismic Interpretation, choose another license so one of your colleagues can interpret seismic. Petrel Main Window The Petrel window starts off with no project loaded. Different parts of the window perform different tasks. The main parts are:
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
2/10
2/4/2017
Creating a New Project Petrel 2010 Petrel Manual
1. Title Bar 2. Menu Bar 3. Tool Bar 4. Function Bar 5. Petrel Explorer (both Upper and Lower) 6. Status Bar 7. Object Information Area 8. Visualization/Graphics Windows
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. 1. The Title Bar contains: a. The Petrel version b. The active Petrel project c. The active process d. The active graphics window 2. The Menu Bar contains pull down menus: e. File ‐ file manipulation; opening, closing, etc. f. Edit ‐ file editing g. View ‐ what can be seen in the Petrel window h. Insert ‐ creation of new folders and objects i. Project ‐ settings related to the Petrel project and simulators j. Tools ‐ starting simulators and general Petrel tools k. Window ‐ creation and manipulation of graphic windows l. Help ‐ Help for the Petrel application 3. The Tool Bar contains icons for: m. File manipulation n. Graphic options 4. The Function Bar contains icons for: o. The active process (sometimes more than one column of icons is needed because there are so many) p. The active graphics window
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
3/10
2/4/2017
Creating a New Project Petrel 2010 Petrel Manual
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. 5. The Petrel Explorer is broken up into two parts: q. The Upper Petrel Explorer ‐ contains the Input, Models, Results and Completions tabs r. The Lower Petrel Explorer ‐ contains the Processes, Cases, Workflows and Windows tabs 6. Status Bar ‐ Whenever a process takes much time, information about completion status is put here 7. Object Information ‐ Contains information about an object picked with the cursor in the graphics area
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. 8. Visualization/Graphics Area ‐ Contains all picture windows and report windows Create a New Project Creating a new project may be different depending on the company and environment. Some companies have a system where data is automatically extracted from a database and loaded into Petrel. Others have a system where the project environment is setup and the data is provided by OpenSpirit. In other cases, the user must start the project himself or herself. When Petrel begins, no project is loaded; everything is "blank". The figure below illustrates a new, blank Petrel project. Other methods for getting a new, blank project when Petrel is already running are: Go to the Tool bar at the top‐left of Petrel and click on the New Project icon (or CTRL‐N)
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
4/10
2/4/2017
Creating a New Project Petrel 2010 Petrel Manual
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. Go to the Menu bar at the top‐left of Petrel and click on File > New Project. If the current Petrel project has been modified, Petrel asks whether or not to Save the current project before opening the blank one. Click Yes to save the project and open a new blank one, No to disregard any changes since the last save and open a new blank one or Cancel to remain in the current project. Project Settings The first menu the user should open is from the Menu bar at the top of Petrel: Project > Project Settings. The Settings dialog appears:
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. Info tab Under the Info tab, general project information may be entered. Coordinates and Units tab Under the Coordinates and units tab, much required project information is entered. Click on the Coordinates... button to choose a Coordinate Reference System (CRS). The CRS may be null if no reference is desired. Prior to Petrel 2010, a CRS wasn't used at all. The CRS selection window appears (left): Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. At first (if no previous CRS has been chosen), the map at the top is blank and no CRS (at the bottom) is highlighted. When a CRS is chosen, the name of the CRS is highlighted and the area it covers is located on the map (right): When you click OK, the name is placed in the previously empty box to the right of the Coordinates... button on the Settings menu.
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
5/10
2/4/2017
Creating a New Project Petrel 2010 Petrel Manual
1. Next, check to see that units are correct. Go to the Coordinates and Units tab
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. 2. The options under Unit system: are Metric ‐ (X,Y,Z) are all in meters Field ‐ (X,Y,Z) are all in feet Field‐UTM ‐ (X,Y) are in meters and (Z) is in feet 3. To customize the units, check the box in front of Customize. This allows you to change the units of various items. 4. Choosing to change the Area unit: yields a variety of different units. 5. The Volume unit: has a number of different units to choose from: Misc settings 1 tab 6. Next, change to the Misc settings 1 tab 7. The most important variable to set here is the Auto‐ save every: switch.
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. If it is not checked, Petrel will not ask you if you want to save the project. If it is checked, Petrel will ask you (in this case every 15 minutes) if you want to save the project. If you click No, no Save will be performed. If you click Yes, an Incremental Save (only those items changed since the last Save) will be performed. Remember, that if Petrel crashes, all work done since the last Save will be lost. Many people like to use this function as it has saved them from losing data while others don't like to use this function as it can be very annoying. It is up to you. If you do choose to Auto‐save, we recommend that you DO NOT use Silent auto‐ save. This doesn't ask you if you want to Save, it just Saves. This can save errors you don't want to save or tests you are trying. You can over‐write good data with bad data using Silent auto‐save.
Petrel is a mark of Schlumberger
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
6/10
2/4/2017
Creating a New Project Petrel 2010 Petrel Manual
4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. Misc settings 2 tab 8. Click on the Misc settings 2 tab Normally, nothing is set here at the start of a project. This tab does contain the Global surface filter information. In other Petrel windows, if you click to use a filter, this window will pop up and you can enter the closed line file to use in filtering. Sometimes, this window pops up on another tab. You need to know to come to this Misc settings 2 tab to set the filter. Clicking on the OK or Apply button will save all the settings to the interactive Petrel project. You must Save your project to save it to disk. Save the Project as To save the project the first time (or to save a copy with a different name), from the Menu Bar at the top of Petrel, use the File > Save project as option: 9. Navigate to the correct folder 10. Type in a name for the project 1. Click Save
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. A new project folder (the name followed by .ptd) and a new driver file (the name followed by .pet) will appear in the folder. System Settings The next menu the user should open is also from the Menu bar at the top of Petrel: Tools > System Settings. In this menu, you can set how you want Petrel to look for the project. The Settings dialog appears:
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
7/10
2/4/2017
Creating a New Project Petrel 2010 Petrel Manual
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. Effects tab This is the main tab to change information. The Toolbars style: options are: a. Images only ‐ The icons have only pictures and no text b. Images and shortcuts ‐ The icons have pictures and many also have the keyboard shortcut to perform the same function. c. Images and verbose text ‐ The icons have pictures and the "tooltips" used to identify the icon. Many users use the first option (Images only) and second option (Images and shortcuts). Very few, if any, use the third option (Images and verbose test) as this makes the icons very large and not many can be seen on the screen at one time. On function bars with few icons, this is not a big problem. For some processes, the function bars contain over 30 icons. This third option can now be a big problem. Other useful options are: d. Disable spin animation e. Rename node directly (mouse) Disable spin animation turns off the ability to "spin continuously" an image in a 3D window. For many new users, it is often a problem to stop the spin when it is not wanted so they use this option. More experienced users get used to stopping the spin and often don't use this option. Rename node directly (mouse) allows a user to use a "slow double‐ click" to change a name in the Petrel Explorer similar to Windows Explorer. If this option is not checked, the only places to change an object's name are 1) in the Info tab of that object's Settings dialog and 2) using the F2 key (similar to Windows Explorer).
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. Clicking OK or Apply sets the parameters. Other Settings A few other settings are also useful to the Petrel user. They are: 1. Make icons larger or smaller 2. Draw Style If you are having difficulty seeing the icons in Petrel, you can make them larger: 1. Make icons larger or smaller a. Right‐click on an open space in the blue area near the Menu and Tool bars b. Choose Customize.
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
8/10
2/4/2017
Creating a New Project Petrel 2010 Petrel Manual
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. c. The icons on the Menu, Tool and Function bars are small d. Click the box in front of Large Icons on Toolbars e. The icons are now much larger. Un‐check the box to return to the smaller icons When projects are very large and a lot is displayed in a 3D window, sometimes moving the graphics can be cumbersome and the movement isn’t smooth anymore. When this happens, try selecting move low res from the Draw Style menu to get to lower resolution: 2. Draw Style a. Right‐click on an open space in the Petrel Graphics area
Petrel is a mark of Schlumberger 4801 Woodway Drive, Suite 150W • Houston, TX 77056 • w.scminc.com •
[email protected] © 2011 SCM E&P Solutions, Inc. (Parte 1 de 2) 1
2
próxima »
1 Comentários
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
9/10
2/4/2017
Creating a New Project Petrel 2010 Petrel Manual
1 comentário
Classificar por Mais antigos
Adicionar um comentário...
Azer Veliyev · 12 ok Curtir · Responder · 9 de janeiro de 2015 10:00 Facebook Comments Plugin
Pesquisar…
Sobre o Ebah:
Cursos:
O que é o Ebah?
Agrárias
O Ebah é uma rede social dedicada exclusivamente ao
Ajudenos a melhorar
Artes
campo acadêmico e tem como principal objetivo o
Imprensa
Biológicas
compartilhamento de informação e materiais entre alunos
Direitos Autorais
Engenharias
e professores.
Termos e Privacidade
Exatas
Saiba mais »
Trabalhe no Ebah
Humanas e Sociais
http://www.ebah.com.br/content/ABAAAgcAEAA/creatinganewprojectpetrel2010
Fique ligado:
Alguns direitos reservados. © 20062013
10/10
