cpwd-dar-2012-in-ms-excel.xls

February 22, 2018 | Author: Muhammad Junaid | Category: Lime (Material), Mortar (Masonry), Cement, Building Engineering, Manmade Materials
Share Embed Donate


Short Description

CPWD drawings...

Description

Notes :

CPWD DELHI ANALYSIS OF RATES -2012 (WITH FORMULAS) 01. This entire work is done by me alone and every item is compared with DSR-2012 and DAR-2012 02. At the end of each item the DSR-2012 rate is shown, so that it is easy to compare both the rates. 03. DSR rate in 'Green' means it is tallied with Analysed rate. 04. DSR rate in 'Red' means it is not tallied with Analysed rate but the analysed rate is tallied with that of DAR-2012. 05. Where sub analysis is involved the analysed rate will not tally exactly to that of DAR-2012 because, in DAR every rate is rounded-off. But in this analysis, I have not rounded-off to nearest 5 np. But both the rates are very close. 06. Where ever there is an error in DAR (only a few items this time) it is mentioned in the item it self. 07. Please let me know, if I am violating any copy right, so that I can delete the post from internet. If any one want to share some thing about this analysis with me, they are welcome! Please do mail me on [email protected]. Even a small comment will boost my enthusiasm to work more…. Sincerely yours Rambabu Jalli, SDE(Civil), BSNL, Hyderabad.

DSR-12

Page 1 of 2298

ANALYSIS OF RATES BASED ON DAR-2012 Sub-Data Analysis - without water charges and without CP & OH Item Code : 16.052.X Code

0773 1980 0982 2208 2262 2203

0114 0101 9999 9999

Description

Details of Cost for : 1.00 Cum Unit Quantity

Sub Analysis - X Details of cost for 1 cum of lime Flyash mortar 1:2:3 (lime:2 flyash:3 coarse sand). MATERIALS: Unslaked lime quint Flyash cum Coarse sand cum Carriage of Unslaked lime cum Carriage of Flyash cum Carriage of Coarse sand cum Labour for slaking the lime making, lime putty, grinding, measuring, carrying, depositing and mixing. Beldar Day Bhishti Day Running and upkeep of mortar mile L.S. Sundries L.S.

Rate per One Cum :

1.52 0.48 0.72 0.24 0.48 0.72

Beldar Bhisti Cost of running and upkeeping of mortar mill Sundries

Day Day L.S. L.S.

Rate per One Cum :

300.00 7.75 1120.00 87.60 87.60 87.60

0.90 247.00 0.45 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 1791.80

Item Code : 3.19 Mortar in lime , surkhi ( 50% red and 50% light yellow) and marble dust 1:1.5:0.5 Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIAL: (0.475 cum of lime putty = 3.01 q of unslaked lime) 1182 Surkhi Cum 0.7125 0773 Unslaked lime quint 3.01 0784 Marble dust/ powder cum 0.24 LABOUR : For slaking lime, making lime putty, grinding and carrying 0114 0101 9999 9999

Rate

Rate

700.00 300.00 1000.00

0.90 247.00 0.45 260.00 10.35 1.49 5.20 1.49 Cost for 1.00 Cum Rs 2004.22

Item Code : 3.10 Cement mortar 1:5 (1 cement : 5 coarse sand) Code

0367 2209 0982 2203

DSR-12

Description MATERIALS (0.214cum. of cement = 0.31 tonne) Cement Carriage of Cement Coarse sand Carriage of Coarse sand LABOUR

Details of Cost for : 1.00 Cum Unit Quantity

tonne tonne cum cum

0.31 0.31 1.07 1.07

Rate

5000.00 77.87 1120.00 87.60

Page 2 of 2298

0114 0101 9999 9999

For measuring, carrying, depositing and mixingBeldar Bhisti Hire and running charges of mechanical mixer Sundries

Day Day L.S. L.S.

Rate per One Cum :

0.75 247.00 0.07 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 3129.96

Item Code : 3.7 Cement mortar 1:2 (1 cement : 2 coarse) Code

0367 2209 0982 2203

0114 0101 9999 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS (0.476 cum. of cement = 0.68 tonne) Cement Carriage of Cement Coarse sand Carriage of Coarse sand LABOUR For measuring, carrying, depositing and mixingBeldar Bhisti Hire and running charges of mechanical mixer Sundries

tonne tonne cum cum

Day Day L.S. L.S.

Rate per One Cum :

0.68 0.68 0.95 0.95

Rate

5000.00 77.87 1120.00 87.60

0.75 247.00 0.07 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 4863.86

Item Code : 18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item no.18.41.1 Code 6501 2335 0114 0115

Description MATERIALS: Fine sand Carriage of fine sand LABOUR: Beldar Coolie

Details of Cost for : 1.00 Cum Unit Quantity

Rate

cum cum

1.00 1.00

Day Day

0.09 247.00 0.11 247.00 Cost for 1.00 Cum

Rate per One Cum :

500.00 87.60

Rs 637.00

Item Code : 1681-PY Plants and Labour required for sub anlaysis 16.81Y for item 16.81 Code 1215 0102 0103 0100 0114 9999 0116 0103

DSR-12

Description Welding by electric plant Cutting, assembling and erection charges Blacksmith 1st class Blacksmith 2nd class Bandhani Beldar Sundries Labour for riveting / bolting / cutting etc. Fitter (grade 1) Blacksmith 2nd class

Details of Cost for : 1.00 job Unit Quantity cm 165.00

Rate 1.50

Day Day Day Day L.S.

0.115 0.115 0.11 0.83 12.10

301.00 273.00 260.00 247.00 1.49

Day Day

0.41 0.54

301.00 273.00

Page 3 of 2298

0100 0114 0139 9999

Bandhani Beldar Skilled Beldar Sundries

Day Day Day L.S.

Rate per One Job :

0.70 260.00 0.54 247.00 0.81 260.00 12.10 1.49 Cost for 1.00 job Rs 1380.00

Item Code : 1681-P Cost materials in sub-analysis of 16.81X for item 16.81 Code

Details of Cost for : 1.00 No. Unit Quantity

Description

Rate

MATERIALS: M.S. Sheet 1.63mm thick = 1x2.50x2.00 = 5.00 sqm @ 12.80 kg/sqm = 64.00 kg wastage @ 5%= 3.20 kg Total = 67.20 kg 1013

1007

Mild steel sheets for tanks MS Angle - 40 x 40 x 6 mm Out frame=2x(2.50+2.00)=9.00 m Vertical extra = 2x0.300 = 0.60 m Horizontal = 1x2.50 =2.50 m Bracing = 1x3.20 = 3.20 m Bracing at bottom = 2x0.50 = 1.00 m Total = 16.30 m @ 3.50 kg/m = 57.05 kg + wastage @ 5% = 2.85 kg Total = 59.90 kg Structural steel such as tees, angles channels and R.S. joists

quint

0.672

4600.00

quint

0.599

4250.00

quint

0.0599

4250.00

quint tonne

0.1449 4200.00 0.148 77.87 Cost for 1.00 No.

M.S. Channel = 2x0.50 =1.00 m @ 5.70 kg/m = 5.70 kg+ wastage @ 5% = 0.29 kg Total = 5.99 kg 1007

Structural steel such as tees, angles channels and R.S. joists M.S. Flat 30x5 mm Horizontal = 3x2.50 = 7.50 m Vertical = 2x2.00 = 4.00 m Total = 11.50 m @1.20 kg/m = 13.80 kg + wastage @ 5% = 0.69 kg Total = 14.49 kg

1008 2205

Flats up to 10 mm in thickness Carraige of Steel

Rate per Each :

Rs 6511.63

Item Code : 16.052.Y Code

16.052.X

DSR-12

Description Sub Analysis - Y Details of cost for 1 cum. of cement concrete MATERIALS: Lime Flyash mortar Sub-Analysis - X For item 16.52

Details of Cost for : 1.00 Cum Unit Quantity

Cum

0.40

Rate

1791.80

Page 4 of 2298

0295 0297 2202 0114 0115 0101 0123 0124 0128 9999 9999 9999

Stone aggregate 20mm nominal size Stone aggregate 10mm nominal size Carriage of stone aggregate Labour: Beldar Coolie Bhishti Mason 1st class Mason 2nd class Mate Hire and running charges of mixer Sundries Hire charges of steel moulds, table vibrators, rammers, bolts, nuts and washers etc.

cum cum cum

0.64 0.21 0.85

1050.00 1050.00 87.60

Day Day Day Day Day Day L.S. L.S. L.S.

0.65 0.60 0.27 0.05 0.05 0.04 26.91 13.52 53.82

247.00 247.00 260.00 301.00 273.00 260.00 1.49 1.49 1.49

Cost for 1.00 Cum Rate per One Cum :

Rs 2242.16

Item Code : 1643-B ANNEXURE-B for item No. 16.43_x000D_ Code

Details of Cost for : 8.50 Cum Unit Quantity

Description

Rate

Part-1 Cost of materials : Assuming that pavement 30m long 22.5m wide and 0.30m deep having panel size 6.15x4.6lx0.30m or 8.50cum laid in a day of 8 hrs. Hence form work to be provided for 2 days. Material for 61.5m long 46.10m wide pavement 22x30.75 = 676.50 2x46.10 = 92.20 Total = 768.70m. 768.70 @ 83.10 kg/ m = 25.44 M.T. Assuming that channel will become unserviceable after use for 5000 slab (100 times) and salvage value of steel shall fetch

1007 2205

0103 0114 0114

20% of its basic cost. Steel 254.44 qx4/5x 1/5000 = 0.0407104 q Carriage of steel 25.44x4/5x1/5000= 0.00407104 tonne Part-II Labour for assembling, errection, dismetelling and cleaning the shuttering. Assuming that 255 labour for steel shuttering shall be required as compared to timber shuttering. Contact area of 50 slabs of steel shuttering. Long channel = 11x20x0.30 = 66.00 = 2x45.10x0.30 = 27.06 Total= 93.06 Blacksmith 2nd class Beldar = Carriage of steel for extra lead of runway Beldar =

quint tonne

0.0407 0.00407

4250.00 77.87

Day Day

2.86 2.86

273.00 247.00

Day

5.73 247.00 Cost for 8.50 Cum

Rate per One Cum :

Rs 361.86

Item Code : 14.072Y Cost of materials for scaffolding in item no. 14.72X for main item 14.72 Details of Cost for : 1.00 No.

DSR-12

Page 5 of 2298

Code 7397

Description Base Jack (7x2 = 14 Nos) 40mm dia MS tube : Vertical standards 2.5m length =7x2x9x2.5 =315m Bracing ledger 1.50m length = 7x2x9x2.5= 513m (?) Side support 6m length =3x2x6 =36m Horizontal support 3.00m length =18x3x3.00m = 162m Total = 1026m @ 3.67 kg/m =3765.42kg

4009 7387

Mild steel tubes hot finished welded type kilog Spigot for standard jointing Kg 7x2x9 =126 Nos 126 Nos x 0.40m length =50.4 m @ 2.46kg/m =123.98 kg Bolts and nuts up to 300 mm in length quint 2x7x2x9 = 252 Nos @ 0.15 kg/each =37.80 kg or Say 0.378 qtl Clamps / Couplers for clamps for fixing M.S tube with scaffolding = (2x3x2 +2x18x3) = 120 Nos

1034

Unit Nos

Quantity 14.00

Rate 180.00

3765.42 123.98

48.00 45.00

0.378

5400.00

7346

Double coupler Challies 3 Nos x 18 line = 54 Nos Two level plate challies =2x18 line =36 nos =90 Nos

each

120.00

55.00

7398

Challies Cup Locks for : Vertical Standards - 5x7x2x9 = 630 Nos 2x18x19 = 694 Nos Total = 1314 Nos

Nos

90.00

800.00

7399

Cup locks

Nos

Rate per Each :

1314.00 75.00 Cost for 1.00 No. Rs 368030.46

Item Code : 3.6 Cement mortar 1:6 (1 cement : 6 fine sand) Code

0367 2209 0983 2261

0114 0101 9999 9999

Description MATERIALS (0.178 cum. of cement = 0.25 tonne) Cement Carriage of Cement Fine sand Carriage of fine sand LABOUR For measuring, carrying, depositing and mixingBeldar Bhisti Hire and running charges of mechanical mixer Sundries

Details of Cost for : 1.00 Cum Unit Quantity

tonne tonne cum cum

Day Day L.S. L.S.

Rate per One Cum :

DSR-12

0.25 0.25 1.07 1.07

Rate

5000.00 77.87 640.00 87.60

0.75 247.00 0.07 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 2311.69

Page 6 of 2298

Item Code : 3.3 Cement mortar 1:3 (1 cement : 3 fine sand) Code

0367 2209 0983 2261

0114 0101 9999 9999

Description MATERIALS (0.375 cum. of cement = 0.51 tonne) Cement Carriage of Cement Fine sand Carriage of fine sand LABOUR For measuring, carrying, depositing and mixingBeldar Bhisti Hire and running charges of mechanical mixer Sundries

Details of Cost for : 1.00 Cum Unit Quantity

tonne tonne cum cum

Day Day L.S. L.S.

Rate per One Cum :

0.51 0.51 1.07 1.07

Rate

5000.00 77.87 640.00 87.60

0.75 247.00 0.07 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 3631.93

Item Code : 3.4 Cement mortar 1:4 (1 cement : 4 fine sand) Code

0367 2209 0983 2261

0114 0101 9999 9999

Description MATERIALS (0.268 cum. of cement = 0.38 tonne) Cement Carriage of Cement Fine sand Carriage of fine sand LABOUR For measuring, carrying, depositing and mixingBeldar Bhisti Hire and running charges of mechanical mixer Sundries

Details of Cost for : 1.00 Cum Unit Quantity

tonne tonne cum cum

Day Day L.S. L.S.

Rate per One Cum :

0.38 0.38 1.07 1.07

Rate

5000.00 77.87 640.00 87.60

0.75 247.00 0.07 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 2971.81

Item Code : 3.2 Cement mortar 1:2 (1Cement : 2 fine sand) Code 0367 2209 0983 2261 0114 0101 9999 9999

Description (0.475 cum. of cement = 0.68 tonne) Cement Carriage of cement Fine sand Carriage of fine sand (For measuring, carrying, depositing and mixing) Beldar Bhisthi Hire and running charges of mechanical mixer Sundries

Details of Cost for : 1.00 Cum Unit Quantity tonne tonne cum cum Day Day L.S. L.S.

Rate per One Cum :

DSR-12

0.68 0.68 0.95 0.95

Rate 5000.00 77.87 640.00 87.60

0.75 247.00 0.07 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 4407.86

Page 7 of 2298

Item Code : 3.16 White Cement Mortar 1:3 (1 white cement : 3 marble dust) Code

Description

Details of Cost for : 1.00 Cum Unit Quantity

Rate

MATERIALS : (0.357 cum. of white cement = 0.51 tonne) 0368 2209 0114 0784 0101 2268 9999

White cement Carriage of cement Beldar Marble dust Bhisthi Carriage of Marble dust Hire and running charges of mechanical mixer For measuring, carrying, depositing and mixing LABOUR :

tonne tonne Day cum Day cum L.S.

0.51 0.51 0.75 1.07 0.07 1.07 40.43

12000.00 77.87 247.00 1000.00 260.00 87.60 1.49

Cost for 1.00 Cum Rate per One Cum :

Rs 7587.13

Item Code : 3.12 Cement Mortar 1:2 (1 cement : 2 stone dust) Code 0367 2209 0101 1159 9999 2267 9999 0114

Description MATERIALS : Cement (0.475 cum. of cement = 0.68 tonne) Carriage of cement Bhisthi Stone dust Hire and running charges of mechanical mixer Carraige of Stone dust Sundries For measuring, carrying, depositing and mixing Beldar LABOUR :

Details of Cost for : 1.00 Cum Unit Quantity

Rate

tonne

0.68

5000.00

tonne Day cum

0.68 0.07 0.95

77.87 260.00 925.00

L.S. cum L.S.

26.91 0.95 13.52

1.49 87.60 1.49

Day

0.75

247.00

Cost for 1.00 Cum Rate per One Cum :

Rs 4678.61

Item Code : 3.11 Cement mortar 1:6 (1 cement : 6 coarse sand). Code

0367 2209 0982 2203

0114 0101 9999 9999

DSR-12

Description MATERIALS (0.178 cum. of cement = 0.25 tonne) Cement Carriage of Cement Coarse sand Carriage of Coarse sand LABOUR For measuring, carrying, depositing and mixingBeldar Bhisti Hire and running charges of mechanical mixer Sundries

Details of Cost for : 1.00 Cum Unit Quantity

tonne tonne cum cum

Day Day L.S. L.S.

Rate

0.25 0.25 1.07 1.07

5000.00 77.87 1120.00 87.60

0.75 0.07 26.91 13.52

247.00 260.00 1.49 1.49

Page 8 of 2298

Cost for 1.00 Cum Rate per One Cum :

Rs 2825.29

Item Code : 05.009.12-A Cost of centring and shuttering materials for using once in item 5.9.12 - well steining Details of Cost for : 1.00 times Code Description Unit Quantity Rate Surface area Outside area =22/7x4.40x1.00 - 13.82sqm. = 26.39 sqm. Assuming that the timber will become unserviceable after being used 8 times Planks 38 mm (Seconti class kail wood) 26.39x0.038= 1.00cum. Wastage 20% = 0.20cum. = 1.20cum. or 1200 cudm. 1198 Second class kail wood in planks cum 0.15 25000.00 2nd class kail wood battens Inside = 2x25x0.50x0.075x0.038 = 0.0712cum. Outside = 2x28x0.50x0.075x0.038 = 0.0798cum. = 0.1510cum. Wastage 5% = 0.0076 cum. = 0.1586cum. or 158.60 cudm 1197 Second class kail wood in scantling cum 0.00002 25000.00 Safeda bailies 125mm dia. Inside: 25x1.00 = 25.00m Outside: 28x1.00 = 28.00m = 53.00m 0302 Safeda ballies 125 mm diameter metre 6.625 37.00 Cost for 1.00 times Rate per One Time :

Rs 3995.63

Item Code : 3.9 Cement mortar 1:4 (1 cement : 4 coarse sand). Code

0367 2209 0982 2203

0114 0101 9999 9999

Description MATERIALS (0.214 cum. of cement = 0.31 tonne) Cement Carriage of Cement Coarse sand Carriage of Coarse sand LABOUR For measuring, carrying, depositing and mixingBeldar Bhisti Hire and running charges of mechanical mixer Sundries

Details of Cost for : 1.00 Cum Unit Quantity

tonne tonne cum cum

Day Day L.S. L.S.

Rate per One Cum :

0.38 0.38 1.07 1.07

Rate

5000.00 77.87 1120.00 87.60

0.75 247.00 0.07 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 3485.41

Item Code : 3.8 Cement mortar 1:3 (1 cement : 3 coarse sand) Details of Cost for : 1.00 Cum

DSR-12

Page 9 of 2298

Code

0367 2209 0982 2203

0114 0101 9999 9999

Description MATERIALS (0.357 cum. of cement = 0.51 tonne) Cement Carriage of Cement Coarse sand Carriage of Coarse sand LABOUR For measuring, carrying, depositing and mixingBeldar Bhisti Hire and running charges of mechanical mixer Sundries

Unit

tonne tonne cum cum

Day Day L.S. L.S.

Rate per One Cum :

Quantity

Rate

0.51 0.51 1.07 1.07

5000.00 77.87 1120.00 87.60

0.75 247.00 0.07 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 4145.53

Item Code : 3.18 Code

0811 0114 0101 9999

Description Detail of cost for one cum MATERIALS Mud (dry) LABOUR Beldar Bhisti Sundries

Details of Cost for : 1.00 Cum Unit Quantity

cum Day Day L.S.

Rate per One Cum :

1.08

Rate

50.00

0.63 247.00 0.315 260.00 6.45 1.49 Cost for 1.00 Cum Rs 301.12

Item Code : 3.15 White cement mortar 1:2 (1 white cement : 2 marble Code

0368 2209 0784 2268

0114 0101 9999 9999

Description MATERIALS (0.475 cum. of white cement = 0.68 tonne) White Cement Carriage of White Cement Marble dust Carriage of Marble dust LABOUR For measuring, carrying, depositing and mixingBeldar Bhisti Hire and running charges of mechanical mixer Sundries

Details of Cost for : 1.00 Cum Unit Quantity

tonne tonne cum cum

Day Day L.S. L.S.

Rate per One Cum :

0.68 0.68 0.95 0.95

Rate

12000.00 77.87 1000.00 87.60

0.75 247.00 0.07 260.00 26.91 1.49 13.52 1.49 Cost for 1.00 Cum Rs 9509.86

Item Code : 1681-Y Sub-analysis item for fabication charges in item no. 16.81 Code 1681-PY

DSR-12

Details of Cost for : 2.50 m Description Unit Quantity Plants and Labour required for sub anlaysis 16.81Y for item job 1.00 16.81

Rate 1380.00

Page 10 of 2298

1681-PY

Plants and Labour required for sub anlaysis 16.81Y for item job 16.81

0.10

1380.00

Cost for 2.50 m Rate per One Metre :

Rs 607.20

Item Code : 1681-S Cost of material for using once in item code 1681-X (sub analysis for 16.81) Code 1681-P 1681-P 1681-P

Description Cost materials in sub-analysis of 16.81X for item 16.81 Cost materials in sub-analysis of 16.81X for item 16.81 Cost materials in sub-analysis of 16.81X for item 16.81

Details of Cost for : 40.00 times Unit Quantity Rate m 1.00 6511.63 m 0.10 6511.63 m -0.50 6511.63 Cost for 40.00 times

Rate per One Time :

Rs 97.67

Item Code : 14.72X Cost of scaffolding materials for using once in the item code 14.72 Code 14.072Y 14.072Y 14.072Y

Details of Cost for : 40.00 Nos Description Unit Quantity Rate Cost of materials for scaffolding in item no. 14.72X for main Nos 1.00 368030.46 item 14.72 Cost of materials for scaffolding in item no. 14.72X for main Nos 0.10 368030.46 item 14.72 Cost of materials for scaffolding in item no. 14.72X for main Nos -0.25 368030.46 item 14.72 Cost for 40.00 Nos Rate per Each :

Rs 7820.65

Item Code : 1681-X Sub analysis item for material component of Item No. 16.81 Code 1681-S

Description

Details of Cost for : 2.50 m Unit Quantity

MATERIALS: Cost of material for using once in item code 1681-X (sub times analysis for 16.81)

1.00

Rate 97.67

Cost for 2.50 m Rate per One Metre :

DSR-12

Rs 39.07

Page 11 of 2298

Analysis for SCHEDULE MAIN ITEMS : With water charges (1%) and with CP & OH (15%) Item Code: 2.1.1 E/W in surface excavation .. All kinds of soil Code 0114 0115

Description LABOUR: Beldar Coolie

Details of Cost for : 100.00 Sqm Unit Quantity Day Day

7.20 6.00

Add water charges @ 1% on

Rate 247.00 247.00 Total: 3260.40

Add C.P & OH @15% on 3293.00 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 3786.95 Rs 3786.95

Item Code: 2.2.1 E/W in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, .. .., lead upto 50 m and lift upto 1.5 m : All kinds of soil Details of Cost for : 10.00 Cum Code Description Unit Quantity Rate LABOUR : Roller charges (one roller does 1850 sqm. of consolidation per day) 0114 Beldar Day 5.90 247.00 0115 Coolie Day 3.60 247.00 0101 Bhisthi Day 0.40 260.00 0113 Chowkidar Day 0.008 247.00 0003 Hire charges of road roller Day 0.008 1500.00 1235 Diesel litre 0.144 41.29 2342 Carriage of diesel quint 0.0014 8.76 9999 Sundries L.S. 2.73 1.49 Total: Add water charges @ 1% on 2474.51 Add C.P & OH @15% on 2499.26 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 287.42 Rs 287.40

Item Code: 2.3.1 Banking excavated earth …. All kinds of soils Code 0114 0115 0101

0003 0113 1235 2342 9999

DSR-12

Description LABOUR : Beldar Coolie Bhisthi Roller Charges : (one roller does 1850 sqm of consolidation per day ) Hire charges of road roller Chowkidar Diesel Carriage of diesel Sundries

Details of Cost for : 10 cum Unit Quantity Day Day Day

Day Day litre quint L.S.

Rate

2.20 3.60 0.40

247.00 247.00 260.00

0.008 0.008 0.144 0.0014 2.73

1500.00 247.00 41.29 8.76 1.49

Page 12 of 2298

Add water charges @ 1% on

Total: 1560.61

Add C.P & OH @15% on 1576.22 Cost for 10cum Rate per One Cum : Rate as per DSR-12:

Rs 181.27 Rs 181.25

Item Code: 2.4 Deduct for not rolling with power roller. Code 0113 0003 1235 2342 9999

Description LABOURChokidar Roller charges & Hire Charges Diesel Carriage of diesel Sundries

Details of Cost for : -10.00 Cum Unit Quantity Day Day litre quint L.S.

0.008 0.008 0.144 0.0014 1.82

Add water charges @ 1% on

Rate 247.00 1500.00 41.29 8.76 1.49 Total: 22.65

Add C.P & OH @15% on 22.88 Cost for -10.00 Cum Rate per One Cum: Rate as per DSR-12:

-Rs 2.63 -Rs 2.65

Item Code: 2.5 Deduct for not watering the excavated earth for banking. Code 0101

Description LABOURBhishti

Details of Cost for : -10.00 Cum Unit Quantity Day

0.40

Add water charges @ 1% on

Rate 260.00 Total: 104.00

Add C.P & OH @15% on 105.04 Cost for -10.00 Cum Rate per One Cum: Rate as per DSR-12:

-Rs 12.08 -Rs 12.10

Item Code: 2.6.1 E/W in excavation over areas (exceeding 30cm in depth. 1.5m in width 10sqm on plan) - All kinds of soil Details of Cost for : 10.00 Nos Code Description Unit Quantity Average output of Hydraulic Excavator per hour = 30cum.

0020 0018 0128 0115

MACHINERY : Hydraulic Excavator (3D) with driver and fuel Hire and running charges of loader. Mate Coolie (beldar / coolie)

Day Day Day Day

0.04125 0.04125 0.40 2.00

Rate

7500.00 5000.00 260.00 247.00 Total:

DSR-12

Page 13 of 2298

Add water charges @ 1% on

1113.63

Add C.P & OH @15% on 1124.77 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 129.35 Rs 129.35

Item Code: 2.7.1 E/W in excavation over areas (exceeding 30cm in depth. 1.5m in width 10sqm on plan) - Ordinary rock Details of Cost for : 10.00 Cum Code Description Unit Quantity MACHINERY 0020 Hydraulic Excavator (3D) with driver and fuel. Day 0.0625 0017 Hire and running charges of tipper Day 0.0625 0132 Excavators Day 0.705 0133 Breakers Day 1.59 0134 Hole driller Day 0.355 0114 Beldar Day 0.50 0115 Coolie Day 1.35 9999 Sundries L.S. 10.79 Add water charges @ 1% on

Rate 7500.00 1700.00 247.00 247.00 247.00 247.00 247.00 1.49 Total: 1702.59

Add C.P & OH @15% on 1719.62 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 197.76 Rs 197.75

Item Code: 2.7.2 E/W in over areas (exceeding 30 cm in depth, 1.5m in width , 10sqm on plan) - Hard rock (requiring blasting)

Code 0020 0017 0132 0133 0134 0114 0115 0325 0326 9999

Description MACHINERY Hydraulic Excavator (3D) with driver and fuel. Hire and running charges of tipper Rock Excavator Rock Breaker Rock Hole Driller Beldar Coolie Blasting powder Blasting fuse (fuse wire) Sundries

Details of Cost for : 10.00 Cum Unit Quantity Day Day Day Day Day Day Day kilog each L.S.

0.125 0.125 1.06 2.825 0.885 0.45 1.35 3.93 4.00 16.12

Add water charges @ 1% on

Rate 7500.00 1700.00 247.00 247.00 247.00 247.00 247.00 35.00 15.00 1.49 Total: 2994.37

Add C.P & OH @15% on 3024.31 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 347.80 Rs 345.20

Item Code: 2.7.3 E/W in over areas (exceeding 30cm depth, 1.5m in width , 10sqm on plan) - Hard rock (blasting prohibited)

DSR-12

Page 14 of 2298

Code 0020 0017 0132 0133 0135 0103 0114 0115 9999

Description MACHINERY: Hydraulic Excavator (3D) with driver and fuel Hire and running charges of tipper Excavators Breakers Stone Chisellers Black smith 2nd class Beldar Coolie Sundries

Details of Cost for : 10.00 Cum Unit Quantity Day Day Day Day Day Day Day Day L.S.

0.125 0.125 2.47 6.00 1.06 0.175 0.75 1.80 16.12

Add water charges @ 1% on

Rate 7500.00 1700.00 247.00 247.00 260.00 273.00 247.00 247.00 1.49 Total: 4219.34

Add C.P & OH @15% on 4261.53 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 490.08 Rs 490.10

Item Code: 2.8.1 E/W excavation in foundation trenches .. .. All kinds of soil. Code 0020 0018 0128 0115

Description MACHINERY: Hydraulic Excavator (3D) with driver and fuel Hire and running charges of loader. Mate Coolie

Details of Cost for : 10.00 Cum Unit Quantity Day Day Day Day

0.04125 0.04125 0.40 2.05

Add water charges @ 1% on

Rate 7500.00 5000.00 260.00 247.00 Total: 1125.98

Add C.P & OH @15% on 1137.24 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 130.78 Rs 130.80

Item Code: 2.9.1 E/W excavation in foundation trenches .. .. Ordinary rok Code 0020 0017 0132 0134 0134 0114 0115 9999

Description MACHINERY: Hydraulic Excavator (3D) with driver and fuel Hire and running charges of tipper LABOUR: Excavators Hole drillers Hole drillers Beldar Coolie Sundries

Details of Cost for : 10.00 Cum Unit Quantity

Rate

Day Day

0.0625 0.0625

7500.00 1700.00

Day Day Day Day Day L.S.

0.885 1.765 0.53 0.50 1.30 13.52

247.00 247.00 247.00 247.00 247.00 1.49 Total: 1825.21

Add water charges @ 1% on

Add C.P & OH @15% on 1843.46 Cost for 10.00 Cum

DSR-12

Page 15 of 2298

Rate per One Cum: Rate as per DSR-12:

Rs 212.00 Rs 212.00

Item Code: 2.9.2 E/W excavation in foundation trenches .. .. Hard rock (requiring blasting) Code 0020 0017 0132 0133 0134 0114 0115 0325 0326 9999

Details of Cost for : 10.00 Cum Unit Quantity

Description MACHINERY : Hydraulic Excavator (3D) with driver and fuel Hire and running charges of tipper LABOUR: Excavators Breakers Hole drillers Beldar Coolie Blasting powder Blasting fuse Sundries

Rate

Day Day

0.125 0.125

7500.00 1700.00

Day Day Day Day Day kilog each L.S.

1.24 3.00 1.06 0.50 1.30 6.42 7.00 18.85

247.00 247.00 247.00 247.00 247.00 35.00 15.00 1.49 Total: 3261.49

Add water charges @ 1% on

Add C.P & OH @15% on 3294.10 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 378.82 Rs 378.80

Item Code: 2.9.3 E/W excavation in foundation trenches .. .. Hard rock (blasting prohibited) Code 0020 0017 0132 0133 0135 0103 0114 0115 9999

Description MACHINERY Hydraulic Excavator (3D) with driver and fuel. Hire and running charges of tipper LABOURExcavators Breakers Chisellers Black smith II class Beldar Coolie Sundries

Details of Cost for : 10.00 Cum Unit Quantity

Rate

Day Day

0.125 0.125

7500.00 1700.00

Day Day Day Day Day Day L.S.

2.65 6.175 1.06 0.175 0.75 1.50 17.94

247.00 247.00 260.00 273.00 247.00 247.00 1.49 Total: 4235.64

Add water charges @ 1% on

Add C.P & OH @15% on 4278.00 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 491.97 Rs 491.95

Item Code: 2.10.1.1 Excavating trenches for pipes, cables, etc - All kinds of soil - Pipes, cables etc, not exceeding 80 mm dia. Details of Cost for : 180.00 m

DSR-12

Page 16 of 2298

Code

Description Slope assumed 1 in 200. Earth work and fillingMinimum depth of trench 60cm. Average depth = (0.6+1.50)/2 = 1.05 Width for this depth 0.45 cm 180x0.45xl.05 = 85.05 cum

Unit

Quantity

Rate

02.008.01

E/W excavation in foundation trenches .. .. All kinds of soil.

Cum

85.05

130.78

02.025

Filling available excavated earth (excluding rock) .. ..

Cum

85.05

83.80 Total: 0.00

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 180.00 m Rate per One Metre: Rate as per DSR-12:

Rs 101.39 Rs 101.40

Item Code: Excavating trenches for pipes, cables, etc - All kinds of soil - Pipes, cables etc, exceeding 80 mm dia upto 300mm

Code

Details of Cost for : 110.00 m Unit Quantity

Description

Rate

Slope assumed 1 in 200. Earth work and fillingMinimum depth of trench = 0.75+0.20 = 0.95m Average depth = (1.50+0.95)/2 = 1.225M Width = 0.40 + 0.20 = 0.60 m 110x0.60x1.225 = 80.85 cum 5% for collars = 4.04 cum Total = 84.89 cum 02.008.01

E/W excavation in foundation trenches .. .. All kinds of soil.

Cum

84.89

130.78

02.025

Filling available excavated earth (excluding rock) .. ..

Cum

84.89

83.80 Total: 0.00

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 110.00 m Rate per One Metre: Rate as per DSR-12:

Rs 165.60 Rs 165.60

Item Code: 2.10.1.3 Excavating trenches All kinds of soil Pipes 300 to 600 mm. Code

DSR-12

Details of Cost for : 60.00 m Description Unit Quantity Details of cost for 60m length of a pipe of an average dia. say 450mm. Slope assumed 1 in 200. Earth work and fillingMinimum depth of trench 0.75+0.45= 1.20m Average depth = (1.50+1.20)/2 =1.35 Width = 0.40 + 0.45 = 0.85 m 60x0.85xl.35 = 68.85 cum

Rate

Page 17 of 2298

02.008.01

5% for collars = 3.44 cum Total = 72.29 cum E/W excavation in foundation trenches .. .. All kinds of soil.

72.29

130.78

02.025

Filling available excavated earth (excluding rock) .. ..

72.29

83.80 Total: 0.00

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 60.00 m Rate per One Metre: Rate as per DSR-12:

Rs 258.53 Rs 258.55

Item Code: 2.13.1.1 Excavating trenches for pipes, cables, etc - Ordinary rock - Pipes, cables etc, not exceeding 80 mm dia. Details of Cost for : 180.00 m Code Description Unit Quantity Slope assumed 1 in 200 ExcavationQuantity same as in item No.2.10.1.1 02.009.01 E/W excavation in foundation trenches .. .. Ordinary rok 85.05 Refilling, ramming and watering 02.025 Filling available excavated earth (excluding rock) .. .. 85.05 Extra labour for ramming of rock 0114 Beldar (A) Day 2.00 Add water charges @ 1% except on [A]+[B] i.e on

Rate

212.00 83.80 247.00 Total: 494.00

Add C.P & OH @15% except on [A]+[B] i.e on 498.94 Cost for 180.00 m Rate per One Metre: Rate as per DSR-12:

Rs 142.95 Rs 142.95

Item Code: 2.13.1.2 Excavating trenches for pipes, cables, etc - Ordinary rock - Pipes, cables etc, exceeding 80mm dia not exceeding 300mm

Code

02.009.01 02.025 0114

Details of Cost for : 80.00 m Description Unit Quantity Details of cost for 80 m length of pipe of an average dia. Say 200mm. Slope assumed 1 in 200 ExcavationMinimum depth of trench. 0.75+0.15+0.20 = 1.10m Average depth = ( 1.10 + 1.50)/2 = 1.30m Minimum width of trench = 0.90m 80x0.90x1.30 = 93.60 cum.

E/W excavation in foundation trenches .. .. Ordinary rok Refilling, ramming and watering Filling available excavated earth (excluding rock) .. .. Extra labour for ramming of rock Beldar

Cum

93.60

212.00

Cum

93.60

83.80

Day

2.20

247.00 Total: 543.40

Add water charges @ 1% except on [A]+[B] i.e on

DSR-12

Rate

Page 18 of 2298

Add C.P & OH @15% except on [A]+[B] i.e on 548.83 Cost for 80.00 m Rate per One Metre: Rate as per DSR-12:

Rs 353.98 Rs 353.95

Item Code: 2.13.1.3 Excavating trenches Ordinary rocks : Pipes 300 to 600 mm. Code

02.009.01 02.025 0114

Details of Cost for : 30.00 m Description Unit Quantity Details of cost for 30 m. length of a pipe of an average dia. say 450mm. Slope assumed 1 in 200. ExcavationMinimum depth of trench 0.75+0.15+0.15= 1.35m. Average depth = (1.35+ 1.50)/2 = 1.425 m. Width of trench = 0.90 m. 30x0.90x1.425 =30.475 cum. 5% for collors = 1.924 cum 40.399 cum E/W excavation in foundation trenches .. .. Ordinary rok 40.399 Refilling, ramming and watering Filling available excavated earth (excluding rock) .. .. 40.399 Beldar Day 0.94 Add water charges @ 1% except on [A]+[B] i.e on

Rate

212.00 83.80 247.00 Total: 232.18

Add C.P & OH @15% except on [A]+[B] i.e on 234.50 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 407.32 Rs 407.30

Item Code: 2.13.2.1 Excavating trenches Hard rock (requi blasting) : Pipes, upto 80 mm dia. Code

02.009.02

02.025 0114

Details of Cost for : 180.00 m Description Unit Quantity Details of cost for 180 m length of a pipe of a average dia. say 40mm. Slope assumed 1 in 200 ExcavationQuantity same as in item No.2.10.1.1 E/W excavation in foundation trenches .. .. Hard rock 85.05 (requiring blasting) Refilling, ramming and watering Filling available excavated earth (excluding rock) .. .. 85.05 Extra labour for ramming of rock Beldar Day 2.50 Add water charges @ 1% except on [A]+[B] i.e on

Rate

378.82

83.80 247.00 Total: 617.50

Add C.P & OH @15% except on [A]+[B] i.e on 623.68 Cost for 180.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 222.57 Rs 222.55

Page 19 of 2298

Item Code: 2.13.2.2 Excavating trenches Hard rock (requi blasting) : Pipes 80 mm to 300 mm dia. Details of Cost for : 80.00 m Code Description Unit Quantity Details of cost for 80 m length of a pipe of an average dia. say 200mm. Slope assumed 1 in 200 ExcavationQuantity same as in item No.2.13.1.2 02.009.02 E/W excavation in foundation trenches .. .. Hard rock 93.60 (requiring blasting) Refilling, ramming and watering 02.025 Filling available excavated earth (excluding rock) .. .. 93.60 Extra labour for ramming of rock 0114 Beldar Day 2.75 Add water charges @ 1% except on [A]+[B] i.e on

Rate

378.82

83.80 247.00 Total: 679.25

Add C.P & OH @15% except on [A]+[B] i.e on 686.04 Cost for 80.00 m Rate per One Metre: Rate as per DSR-12:

Rs 551.13 Rs 549.80

Item Code: 2.13.2.3 Excavating trenches Hard rock (requi blasting) : Pipes 300 to 600 mm. Code

02.009.02

02.025 0114

Details of Cost for : 30.00 m Description Unit Quantity Details of cost for 30 m length of a pipe of an average dia. Say 450mm. Slope assumed 1 in 200 ExcavationQuantity same as in item No.2.13.1.3 E/W excavation in foundation trenches .. .. Hard rock 40.399 (requiring blasting) Refilling, ramming and watering Filling available excavated earth (excluding rock) .. .. 40.399 Extra labour for ramming of rock Beldar Day 1.17 Add water charges @ 1% except on [A]+[B] i.e on

Rate

378.82

83.80 247.00 Total: 288.99

Add C.P & OH @15% except on [A]+[B] i.e on 291.88 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 634.17 Rs 634.15

Item Code: 2.13.3.1 Excavating trenches Hard rock (blasting prohi) : Pipes upto 80 mm dia. Code

DSR-12

Details of Cost for : 180.00 m Description Unit Quantity Details of cost for 180 m length of a pipe of a average dia. say 40mm. Slope assumed 1 in 200 ExcavationQuantity same as in item No.2.10.1.1

Rate

Page 20 of 2298

02.009.03

02.025 0114

E/W excavation in foundation trenches .. .. Hard rock (blasting prohibited) Refilling, ramming and watering Filling available excavated earth (excluding rock) .. .. Extra labour for ramming of rock Beldar Day

85.05

491.97

85.05

83.80

2.50

247.00 Total: 617.50

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 623.68 Cost for 180.00 m Rate per One Metre: Rate as per DSR-12:

Rs 276.04 Rs 276.05

Item Code: 2.13.3.2 Excavating trenches Hard rock (blasting prohi) : Pipes 80 mm to 300 mm dia. Details of Cost for : 80.00 m Code Description Unit Quantity Details of cost for 80 m length of a pipe of an average dia. say 200mm. Slope assumed 1 in 200 ExcavationQuantity same as in item No.2.13.1.2 02.009.03 E/W excavation in foundation trenches .. .. Hard rock (blasting 93.60 prohibited) Refilling, ramming and watering 02.025 Filling available excavated earth (excluding rock) .. .. 93.60 Extra labour for ramming of rock 0114 Beldar Day 2.75 Add water charges @ 1% except on [A]+[B] i.e on

Rate

491.97

83.80 247.00 Total: 679.25

Add C.P & OH @15% except on [A]+[B] i.e on 686.04 Cost for 80.00 m Rate per One Metre: Rate as per DSR-12:

Rs 683.51 Rs 683.50

Item Code: 2.13.3.3 Excavating trenches Hard rock (blasting prohi) : Pipes 300 to 600 mm. Code

02.009.03

02.025 0114

DSR-12

Details of Cost for : 30.00 m Description Unit Quantity Details of cost for 30 m length of a pipe of an average dia. say 450mm. Slope assumed 1 in 200 ExcavationQuantity same as in item No. 2.13.1.3 E/W excavation in foundation trenches .. .. Hard rock (blasting 40.399 prohibited) Refilling, ramming and watering Filling available excavated earth (excluding rock) .. .. 40.399 Extra labour for ramming of rock Beldar Day 1.17

Rate

491.97

83.80

Add water charges @ 1% except on [A]+[B] i.e on

247.00 Total: 288.99

Add C.P & OH @15% except on [A]+[B] i.e on

291.88

Page 21 of 2298

Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 786.54 Rs 786.50

Item Code: 2.16.1 Close timbering in trenches :- Depth not exceeding 1.5 mtr. Code

1198

1197

0302

2204 0112 0114 9999

Description Details of cost for a trench 30m long and 1.5m deep area 2x30x1.5=90 sqmMATER1ALS The Material can be used four times on the same work and after use of material credit is given @ 75% of cost Poling boards of 2nd class Kail wood planks: 90x0.038 = 3.42 cum = 3420 dm³ Qty taken for cost of using once after deducting for credit = 3420x¼x¼ = 213.75 dm³ Wallings l00mmx 100mm of 2nd class kail wood in scantling: 4x30x0.10x0.10 = 1.20cum = 1200 dm Qty taken for cost of using once after deducting for credit = 1200x¼x¼ = 75 dm³ Safeda Balli struts (12.5mm dia and 1.5m long): 2x17x1.50 = 51m Qty taken for cost of using once after deducting for credit = 51 x¼x¼ = 3.1875 m CARRIAGE Poling boards = 3.42 cum Walling =1.20 cum. Balli struts: 3.14/4x(0.125)² x51 = 0.63 cum Total of carriage = 5.25x¼ = 1.3125 cum. Carpenter llnd class Beldar Sundries

Details of Cost for : 90.00 Sqm Unit Quantity

Rate

cum

0.21375

25000.00

cum

0.075

25000.00

metre

3.1875

37.00

cum Day Day L.S.

1.3125 0.50 1.00 26.91

100.11 273.00 247.00 1.49 Total: 7891.68

Add water charges @ 1% on

Add C.P & OH @15% on 7970.60 Cost for 90.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 101.85 Rs 101.85

Item Code: 2.16.2 Close timbering in trenches :- Depth from 1.5 to 3 mtr. Code

1198

1197

DSR-12

Details of Cost for : 90.00 Sqm Description Unit Quantity Rate Details of cost for a trench 30m long and 1.5m deep area 2x30x 1.50=90.00 sqmMATERIALS The Material can be used four times on the same work and after use of material credit is given @ 75% of cost Poling boards of 2nd class Kail wood planks: cum 0.21375 25000.00 90x0.038 = 3.42 cum = 3420 dm³ Qty taken for cost of using once after deducting for credit = 3420x¼x¼ = 213.75 cudm Walings 100 mmx 100mm of 2nd class kail cum 0.075 25000.00

Page 22 of 2298

0302

2204 0112 0114 9999

wood in scantling: 4x30x0.10x0.10 = 1.20cum = 1200 cudm Qty taken for cost of using once after deducting for credit = 1200x¼x¼ = 75 dm Safeda Balli struts (12.5mm dia and 1.50m metre long): 2x17x1.50 = 51m Qty taken for cost of using once after deducting for credit = 51 ¼ ¼ CARRIAGE Poling boards = 3.42 cum Walling =1.20 cum. Balli struts: 3.14/4x(0.125)^3 x51 =0.63 cum Total of carriage = 5.25x/4 = 1.3125 cum. cum Carpenter Ilnd class Day Beldar Day Sundries L.S.

3.1875

37.00

1.3125 0.75 2.00 40.43

100.11 273.00 247.00 1.49 Total: 8227.07

Add water charges @ 1% on

Add C.P & OH @15% on 8309.34 Cost for 90.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 106.17 Rs 106.20

Item Code: 2.16.3 Close timbering in trenches :- Depth from 3 to 4.5 mtr. Code

1198

1197

0302

2204 0112 0114 9999

Description Details of cost for a trench 30m long and 1.50m deep area 2x30x 1.5=90 sqmMATERIALS The Material can be used four times on the same work and after use of material credit is given @ 75% of cost Poling boards of 2nd class Kail wood planks : 90x0.038 = 3.42 cum = 340 cudm Qty taken for cost of using once after deducting for credit = 3420x¼x¼ = 213.75 cudm Wallings 100mmx 100mm of 2nd class kail wood in scantling: 4x30x0.10x0.10 = I.20cum = 1200 cudm Qty taken for cost of using once after deducting for credit = 1200x¼x¼ = 75 cudm Safeda Balli struts (12.5mm dia and 1.5m long): 2x17x1.5 = 51m Qty taken for cost of using once after deducting for credit = 51x¼x¼ = 3.1875 m CARRIAGE Poling boards = 3.42 cum Walling - = 1.20 cum. Balli struts: 3.14/4x(0.125)^3 x51 =0.63 cum Total of carriage = 5.25x¼ = 1.3125 cum. LABOUR CarpenferTmd class Beldar Sundries

Details of Cost for : 90.00 Sqm Unit Quantity

cum

0.21375

25000.00

cum

0.075

25000.00

metre

3.1875

37.00

cum

1.3125

100.11

Day Day L.S.

1.50 4.00 80.73

273.00 247.00 1.49 Total: 8985.87

Add water charges @ 1% on

DSR-12

Rate

Page 23 of 2298

Add C.P & OH @15% on 9075.73 Cost for 90.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 115.97 Rs 115.95

Item Code: 2.17.1 Close timbering in case of shafts,wells,cesspits,manholes Depth not exceeding 1.5 mtr. Details of Cost for : 6.60 Sqm Code Description Unit Quantity Details of cost for a manhole 1.2m x 1.0m x1.5m- Surface area: 2x(1.2+1.0)x1.5 = 6.6sqm MATERIALS The Material can be used four times on the same work and after use of material credit is given @ 75% of cost 1198 Poling boards of 2nd class Kail wood planks: cum 0.01568 6.60x0.038 = 0.251 cum = 251 cudm Qty taken for cost of using once after deducting for credit = 251 x ¼ x ¼ = 15.6875 cudm 1197 Walling of 2nd class kail wood scantling cum 0.00512 2x2x1.124x0.10x0.10 =0.045 cum 2x2x0.924x0.10x0.10 = 0.037 cum. Total Kail wood = 0.082 cum. = 82dm Qty taken for cost of using once after deducting for credit = 82x¼x¼ = 5.125 cudm 0302 Safeda Balli struts (125mm dia and 1.50m long) metre 0.4118 2x2x0.924 = 3.696 2x2x0.724 = 2.896 Total of balli = 6.592m Qty taken for cost of using once after deducting for credit = 6.592x¼x¼ = 0.1035 m 2204 CARRIAGE cum 0.1035 Poling boards = 0.251 cum Walling =0.082 cum. Balli struts 3.14/4x(0.125)^2 x6.59 = 0.081 cum. Total of carriage = 0.414 cum ¼ = 0.1035 cum. LABOUR: 0112 Carpenter Ilnd class Day 0.06 0114 Beldar Day 0.12 9999 Sundries L.S. 2.73 Add water charges @ 1% on

Rate

25000.00

25000.00

37.00

100.11

273.00 247.00 1.49 Total: 595.69

Add C.P & OH @15% on 601.65 Cost for 6.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 104.83 Rs 104.90

Item Code: 2.17.2 Close timbering in case of shafts,wells,cesspits,manholes Depth exceeding 1.5 m to 3 m. Details of Cost for : 6.60 Sqm Code Description Unit Quantity Details of cost for a manhole 1.2m x 1.0m x1.5m- Surface area: 2x(1.20+1.0)x1.50 = 6.6 sqm MATERIALS The Material can be used four times on the same work and after use of material credit is given @ 75% of cost

DSR-12

Rate

Page 24 of 2298

1198

1197

0302

2204

0112 0114 9999

Poling boards of 2nd class Kail wood planks: 6.6x0.038 = 0.251 cum = 251 cudm Qty taken for cost of using once after deducting for credit = 251 x ¼ x ¼ = 15.6875 cudm Walling of 2nd class kail wood scantling 2x2x1.124x0.10x0.10 = 0.045 cum 2x2x0.924x0.10x0.10 = 0.037 cum. Total Kail wood = 0.082 cum. = 82 cudm Qty taken for cost of using once after deducting for credit = 82x¼x¼ = 5.125 cudm Safeda Balli struts (125mm dia and 1.5m long) 2x2x0.924 = 3.696 2x2x0.724 = 2.896 Total of balli = 6.592m Qty taken for cost of using once after -deducting for credit = 6.592x¼x¼ = 0.1035 m CARRIAGE Poling boards = 0.251 cum Walling = 0.082 cum. Balli struts 3.14/4x(0.125)^2 x6.59 = 0.081 cum. Total of carriage = 0.414 cum x¼ = 0.1035 cum LABOUR: Carpenter Ilnd class Beldar Sundries

cum

0.01569

25000.00

cum

0.00513

25000.00

metre

0.4118

37.00

cum

0.1035

100.11

Day Day L.S.

0.12 0.25 5.46

273.00 247.00 1.49 Total: 648.75

Add water charges @ 1% on

Add C.P & OH @15% on 655.24 Cost for 6.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 114.17 Rs 114.15

Item Code: 2.17.3 Close timbering in case of shafts,wells,cesspits,manholes Depth exceeding 3 m to 4.5 m. Details of Cost for : 6.60 Sqm Code Description Unit Quantity Details of cost for a manhole 1.2m x 1.0m x 1.5m- Surface area: 2x( 1.2+1.0)x 1.5 = 6.6sqm MATERIALS The Material can be used four times on the same work and after use of material credit is given @ 75% of cost 1198 Poling boards of 2nd class Kail wood planks: cum 0.01569 6.6x0.038 = 0.251 cum = 251 cudm Qty taken for cost of using once after deducting for credit = 251x¼x¼ = 15.6875 cudm 1197 Walling of 2nd class kail wood scantling cum 0.00512 2x2x1.124x0.10x0.10 = 0.045 cum 2x2x0.924x0.10x0.10 = 0.037 cum. Total Kail wood = 0.082 cum. = 82 cudm Qty taken for cost of using once after deducting for credit = 82x¼x¼ = 5.125 cudm 0302 Safeda Balli struts (12.5mm dia and 1.50m long) metre 0.4118 2x2x0.924 = 3.696 2x2x0.724 = 2.896 Total of balli = 6.592m Qty taken for cost of using once after -deducting for credit = 6.592x¼x¼ = 0.1035 m

DSR-12

Rate

25000.00

25000.00

37.00

Page 25 of 2298

2204

0112 0114 9999

CARRIAGE Poling boards = 0.251 cum Walling = 0.082 cum. Balli struts 3.14/4x(0.125)^2 x6.59 = 0.081 cum. Total of carriage = 0.414 cum x¼ = 0.1035 cum LABOUR: Carpenter Ilnd class Beldar Sundries

cum

0.1035

100.11

Day Day L.S.

0.19 0.38 8.06

273.00 247.00 1.49 Total: 703.59

Add water charges @ 1% on

Add C.P & OH @15% on 710.63 Cost for 6.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 123.82 Rs 123.85

Item Code: 2.18.1 Close timbering over areas :- Depth not exceeding 1.5 mtr. Code

1198

1197

0302

2204

0112 0114 9999

Description Details of cost for an area 30m long and 1.50m deep-Area 30x1.50m = 45 sqm. MATERIALS The Material can be used four times on the same work and after use of material credit is given @ 75% of cost Poling boards of 2nd class Kail wood planks 250x38mm : 45x0.038 = 1.71 cum = 1.710 cudm Qty taken for cost of using once after deducting for credit = 1710x¼x¼ = 106.875 cudm Walling of Ilnd class kail wood in scantling 100x100mm : 30x0.10x0.10 = 0.30cum = 300 cudm Qty taken for cost of using once after deducting for credit = 300x¼x¼ = 18.75 cudm Raking struts Safeda balleis 12mm dia : 17 x 1.50 =25.5m Qty taken for cost of using once after deducting for credit = 25.5x¼x¼ = 1.59 m CARRIAGE Poling boards = 1.71 cum Walling “ = 0.30cum: Rakingstruts3.14/4x(0.125)2 = 0.313cum Total of carriage = 2.323 cum x¼ = 0.581 cum LABOUR: Carpenter Ilnd class Beldar Sundries

Details of Cost for : 45.00 Sqm Unit Quantity

Rate

cum

0.10688

25000.00

cum

0.01875

25000.00

1.59

37.00

cum

0.581

100.11

Day Day L.S.

0.25 0.50 31.46

273.00 247.00 1.49 Total: 3496.37

metre

Add water charges @ 1% on

Add C.P & OH @15% on 3531.33 Cost for 45.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 90.25 Rs 90.25

Item Code: 2.18.2

DSR-12

Page 26 of 2298

Close timbering over areas :- Depth from 1.5 to 3 mtr. Code

1198

1197

0302

2204

0112 0114 9999

Description Details of cost for an area 30m long and 1.5m deep-Area -30x 1,5m = 45 sqm. MATERIALS The Material can be used four times on the same work and after use of material credit is given @ 75% of cost Poling boards of 2nd class Kail wood planks 250x38mm : 45x0.038 = 1.71 cum =1710 cudm Qty taken for cost of using once after deducting for credit = 1710x¼x¼ = 106.875 cudm Walling of Ilnd class kail wood in scantling 100x100mm : 30x0.10x0.10 = 0.30cum = 300 cudm Qty taken for cost of using once after deducting for credit = 300x¼x¼ = 18.75 cudm Raking struts Safeda balleis 12mm dia : 17 x 1.5 = 25.5m Qty taken for cost of using once after deducting for credit = 25.5x¼x¼ = 1.59 m CARRIAGE Poling boards = 1.71 cum Walling = 0.30 cum Raking struts 3.14/4x(0.125)^2 = 0.313 cum Total of carriage = 2.323 cum x¼ = 0.581 cum LABOUR: Carpenter Ilnd class Beldar Sundries

Details of Cost for : 45.00 Sqm Unit Quantity

Rate

cum

0.10688

25000.00

cum

0.01875

25000.00

1.59

37.00

cum

0.581

100.11

Day Day L.S.

0.50 1.00 34.06

273.00 247.00 1.49 Total: 3691.99

metre

Add water charges @ 1% on

Add C.P & OH @15% on 3728.91 Cost for 45.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 95.29 Rs 95.30

Item Code: 2.18.3 Close timbering over areas :- Depth from 3 to 4.5 mtr. Code

1198

1197

0302

2204

DSR-12

Description Details of cost for an area 30m long and 1.5m deep-Area -30x 1.5m = 45 sqm. MATERIALS The Material can be used four times on the same work and after use of material credit is given @ 75% of cost Poling boards of 2nd class Kail wood planks 250x38mm : 45x0.038 = 1.71 cum = 1710 cudm Qty taken for cost of using once after deducting for credit = 1710x¼x¼ = 106.875 cudm Walling of Ilnd class kail wood in scantling 100x100mm : 30x0.10x0.10 = 0.30cum =300 cudm Qty taken for cost of using once after deducting for credit = 300x¼x¼ = 18.75 cudm Raking struts Safeda balleis 12mm dia : 17 x 1.50 = 25.5m Qty taken for cost of using once after deducting for credit = 25.5x¼x¼ = 1.59 m CARRIAGE Poling boards = 1.71 cum

Details of Cost for : 45.00 Sqm Unit Quantity

Rate

cum

0.10688

25000.00

cum

0.01875

25000.00

1.59

37.00

0.581

100.11

metre

cum

Page 27 of 2298

0112 0114 9999

Walling =0.30 cum. Raking struts 3.14/4x(0.125)^2 = 0.313 cum Total of carriage = 2.323 cum x¼ = 0.581 cum LABOUR: Carpenter Ilnd class Beldar Sundries

Day Day L.S.

0.75 1.50 47.58

Add water charges @ 1% on

273.00 247.00 1.49 Total: 3903.88

Add C.P & OH @15% on 3942.92 Cost for 45.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 100.76 Rs 100.75

Item Code: 2.19 Extra for planking, strutting and packing materials for cavities (in close timbering): Details of Cost for : 90.00 Sqm Code Description Unit Quantity Rate 1198 Polling Boards of Second class kail wood in planks 90x0.038 = 3.42cum Less @ 1/8 of qty cum 2.9925 25000.00 1197 Walling 100mmx100mm : 4x30m x0.1mx 0.1m = 1.20 cum Less @ 1/8 of Qty as timber is suppose cum 1.05 25000.00 0302 Safeda ballies 125 mm diameter and 1.5m long) : 2x17x1.5=51m Less @ 1/8 of Qty as tim metre 44.63 37.00 2204 CARRIAGE Polling boards = 3.42cum Waling = 1.20 cum Balli struts 3.14x4x(0 cum 2.675 100.11 Total: Add water charges @ 1% on 102981.60 Add C.P & OH @15% on 104011.42 Cost for 90.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1329.03 Rs 1329.05

Item Code: 2.20.1 Open timbering in trenches including strutting and shoring complete. - Depth not exceeding 1.5 m Details of Cost for : 90.00 Sqm Code Description Unit Quantity MATERIALS: The material can be used for four times on the same work and after use of material credit is given @ 75% of cost

1198

1197

DSR-12

Poling board of Second class kail wood in planks 1.50mx0.25mx0.038m 2x40x1.5x0.25x0.038 = 1.14cum = 1140 cudm Qty taken for cost of using once after deducting credit 1140x0.25x0.25=71.25 cudm or 0.07125 cum Second class kail wood in scantling

Rate

cum

0.07125

25000.00

cum

0.075

25000.00

Page 28 of 2298

Walling 100mmx100m : 4x30mx0.10mx0.10m =1.20cum or 1200 cudm Qty taken for cost of using once after deducting credit =1200 x 0.25 x 0.25 = 75 cudm or 0.075 cum

0302

2204 0112 0114 9999

Struts of Safeda ballies 125 mm diameter 2x17x1.50m=51m Qty taken for cost of using once after deducting credit 51x0.25x0.25 = 3.18m CARRIAGE : Poling board : 1.14 cum Walling : 1.20 cum Ballies struts - 3.14/4x(0.125)^2 : 0.63 cum Total of carriage = 2.97 x 1 / 4 = 0.74 cum Carraige of Timber LABOUR: Carpenter 2nd class Beldar Sundries

metre

3.18

37.00

cum

0.74

100.11

Day Day L.S.

0.25 0.50 19.76

273.00 247.00 1.49 Total: 4069.18

Add water charges @ 1% on

Add C.P & OH @15% on 4109.87 Cost for 90.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 52.52 Rs 52.50

Item Code: 2.20.2 Open timbering in trenches including strutting and shoring complete. - Depth exceeding 1.5 m but not exceeding 3 m

Code

Description

Details of Cost for : 90.00 Sqm Unit Quantity

Rate

MATERIALS: The material can be used for four times on the same work and after use of material credit is given @ 75% of cost

1198

1197

0302

DSR-12

Poling board of Second class kail wood in planks cum 1.50mx0.25mx0.038m 2x40x1.5x0.25x0.038 = 1.14cum = 1140 cudm Qty taken for cost of using once after deducting credit 1140x0.25x0.25=71.25 cudm or 0.07125 cum Second class kail wood in scantling cum Walling 100mmx100m : 4x30mx0.10mx0.10m =1.20cum or 1200 cudm Qty taken for cost of using once after deducting credit =1200 x 0.25 x 0.25 = 75 cudm or 0.075 cum

Struts of Safeda ballies 125 mm diameter 2x17x1.50m=51m Qty taken for cost of using once after deducting credit 51x0.25x0.25 = 3.18m CARRIAGE :

metre

0.07125

25000.00

0.075

25000.00

3.18

37.00

Page 29 of 2298

2204 0112 0114 9999

Poling board : 1.14 cum Walling : 1.20 cum Ballies struts - 3.14/4x(0.125)^2 : 0.63 cum Total of carriage = 2.97 x 1 / 4 = 0.74 cum Carraige of Timber LABOUR: Carpenter 2nd class Beldar Sundries

cum

0.74

100.11

Day Day L.S.

0.50 1.00 33.15

273.00 247.00 1.49 Total: 4280.88

Add water charges @ 1% on

Add C.P & OH @15% on 4323.69 Cost for 90.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 55.25 Rs 55.25

Item Code: 2.20.3 Open timbering in trenches including strutting and shoring complete. - Depth exceeding 3 m but not exceeding 4.5 m

Code

Details of Cost for : 90.00 Sqm Unit Quantity

Description

Rate

MATERIALS: The material can be used for four times on the same work and after use of material credit is given @ 75% of cost

1198

1197

0302

2204 0112 0114 9999

Poling board of Second class kail wood in planks cum 1.50mx0.25mx0.038m 2x40x1.5x0.25x0.038 = 1.14cum = 1140 cudm Qty taken for cost of using once after deducting credit 1140x0.25x0.25=71.25 cudm or 0.07125 cum Second class kail wood in scantling cum Walling 100mmx100m : 4x30mx0.10mx0.10m =1.20cum or 1200 cudm Qty taken for cost of using once after deducting credit =1200 x 0.25 x 0.25 = 75 cudm or 0.075 cum

Struts of Safeda ballies 125 mm diameter 2x17x1.50m=51m Qty taken for cost of using once after deducting credit 51x0.25x0.25 = 3.18m CARRIAGE : Poling board : 1.14 cum Walling : 1.20 cum Ballies struts - 3.14/4x(0.125)^2 : 0.63 cum Total of carriage = 2.97 x 1 / 4 = 0.74 cum Carraige of Timber LABOUR: Carpenter 2nd class Beldar Sundries

0.07125

25000.00

0.075

25000.00

metre

3.18

37.00

cum

0.74

100.11

Day Day L.S.

1.00 1.75 46.67

273.00 247.00 1.49 Total: 4622.78

Add water charges @ 1% on

DSR-12

Page 30 of 2298

Add C.P & OH @15% on 4669.01 Cost for 90.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 59.66 Rs 59.65

Item Code: 2.21.1 Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete. - Depth not exceeding 1.5 m Details of Cost for : 6.60 Sqm Code Description Unit Quantity Rate MATERIALS: The material can be used for four times on the same work and after use of material credit is given @ 75% of cost

1198

Poling board of Second class kail wood in planks 250mm wide and 38mm thick 6x0.25x1.50mx0.038m = 0.086 cum or 86 cudm Qty taken for cost of using once after deducting credit 86x0.25x0.25=5.3755 cudm or 0.0053755 cum

cum

0.00538

25000.00

0.003

25000.00

0.40

37.00

cum

0.053

100.11

Day Day L.S.

0.03 0.06 1.82

273.00 247.00 1.49 Total: 255.33

1197

Second class kail wood in scantling Walling 100mmx100m : 4x1.20mx0.10mx0.10m = 0.048cum or 48 cudm Qty taken for cost of using once after deducting credit =48 x 0.25 x 0.25 = 3 cudm or 0.003 cum

cum

0302

Safeda ballies 125 mm diameter (4x1.0=4.0m) +(2x1.2=2.4) = 6.4m Qty taken for cost of using once after deducting credit 6.4x0.25x0.25 = 0.40m CARRIAGE :

metre

2204 0112 0114 9999

Poling board : 0.086 cum Walling : 0.048 cum Ballies struts - 3.14/4x(0.125)^2x6.4=0.079 cum Total of carriage = 0.213 x 1 / 4 = 0.053 cum Carraige of Timber LABOUR: Carpenter 2nd class Beldar Sundries

Add water charges @ 1% on

Add C.P & OH @15% on 257.88 Cost for 6.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 44.93 Rs 44.90

Item Code: 2.21.2 Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete. - Depth exceeding 1.5 m but not exceeding 3 m Details of Cost for : 6.60 Sqm

DSR-12

Page 31 of 2298

Code

1198

Description Unit MATERIALS: The material can be used for four times on the same work and after use of material credit is given @ 75% of cost

Poling board of Second class kail wood in planks 250mm wide and 38mm thick 6x0.25x1.50mx0.038m = 0.086 cum or 86 cudm Qty taken for cost of using once after deducting credit 86x0.25x0.25=5.3755 cudm or 0.0053755 cum

Quantity

Rate

cum

0.00538

25000.00

0.003

25000.00

0.40

37.00

cum

0.053

100.11

Day Day L.S.

0.06 0.12 2.73

273.00 247.00 1.49 Total: 279.70

1197

Second class kail wood in scantling Walling 100mmx100m : 4x1.20mx0.10mx0.10m = 0.048cum or 48 cudm Qty taken for cost of using once after deducting credit =48 x 0.25 x 0.25 = 3 cudm or 0.003 cum

cum

0302

Safeda ballies 125 mm diameter (4x1.0=4.0m) +(2x1.2=2.4) = 6.4m Qty taken for cost of using once after deducting credit 6.4x0.25x0.25 = 0.40m CARRIAGE :

metre

2204 0112 0114 9999

Poling board : 0.086 cum Walling : 0.048 cum Ballies struts - 3.14/4x(0.125)^2x6.4=0.079 cum Total of carriage = 0.213 x 1 / 4 = 0.053 cum Carraige of Timber LABOUR: Carpenter 2nd class Beldar Sundries

Add water charges @ 1% on

Add C.P & OH @15% on 282.50 Cost for 6.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 49.22 Rs 49.20

Item Code: 2.21.3 Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete. - Depth exceeding 3 m but not exceeding 4.5 m Details of Cost for : 6.60 Sqm Code Description Unit Quantity Rate MATERIALS: The material can be used for four times on the same work and after use of material credit is given @ 75% of cost

1198

DSR-12

Poling board of Second class kail wood in planks 250mm wide and 38mm thick 6x0.25x1.50mx0.038m = 0.086 cum or 86 cudm Qty taken for cost of using once after deducting credit

cum

0.00538

25000.00

Page 32 of 2298

86x0.25x0.25=5.3755 cudm or 0.0053755 cum 1197

Second class kail wood in scantling Walling 100mmx100m : 4x1.20mx0.10mx0.10m = 0.048cum or 48 cudm Qty taken for cost of using once after deducting credit =48 x 0.25 x 0.25 = 3 cudm or 0.003 cum

cum

0302

Safeda ballies 125 mm diameter (4x1.0=4.0m) +(2x1.2=2.4) = 6.4m Qty taken for cost of using once after deducting credit 6.4x0.25x0.25 = 0.40m CARRIAGE :

metre

2204 0112 0114 9999

Poling board : 0.086 cum Walling : 0.048 cum Ballies struts - 3.14/4x(0.125)^2x6.4=0.079 cum Total of carriage = 0.213 x 1 / 4 = 0.053 cum Carraige of Timber LABOUR: Carpenter 2nd class Beldar Sundries

0.003

25000.00

0.40

37.00

cum

0.053

100.11

Day Day L.S.

0.10 0.20 3.64

273.00 247.00 1.49 Total: 311.73

Add water charges @ 1% on

Add C.P & OH @15% on 314.85 Cost for 6.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 54.86 Rs 54.85

Item Code: 2.22.1 Open timbering over areas including strutting, shoring etc. complete.. - Depth not exceeding 1.5 m Details of Cost for : 45.00 Sqm Code Description Unit Quantity MATERIALS: The material can be used for four times on the same work and after use of material credit is given @ 75% of cost

1198

0302

2204

DSR-12

Poling board of Second class kail wood in planks 250mm wide and 38mm thick 40x1.50x0.25xx0.038 = 0.57 cum or 570 cudm Qty taken for cost of using once after deducting credit 570x0.25x0.25=35.625 cudm or 0.035265 cum Safeda ballies 125 mm diameter 40x1.50 = 60m Qty taken for cost of using once after deducting credit 60x0.25x0.25 = 3.75m CARRIAGE : Poling board : 0.57 cum Ballies struts - 40x 3.14/4x(0.125)^2=0.40 cum Total of carriage = 1.31 x 1 / 4 = 0.3275 cum Carraige of Timber

cum

metre

cum

Rate

0.03563

25000.00

3.75

37.00

0.3275

100.11

Page 33 of 2298

0112 0114 9999

LABOUR: Carpenter 2nd class Beldar Sundries

Day Day L.S.

0.12 0.25 19.76

Add water charges @ 1% on

273.00 247.00 1.49 Total: 1186.24

Add C.P & OH @15% on 1198.10 Cost for 45.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 30.62 Rs 30.60

Item Code: 2.22.2 Open timbering over areas including strutting, shoring etc. complete.. - Depth exceeding 1.5 m but not exceeding 3 m

Code

Details of Cost for : 45.00 Sqm Unit Quantity

Description

Rate

MATERIALS: The material can be used for four times on the same work and after use of material credit is given @ 75% of cost

1198

0302

2204 0112 0114 9999

Poling board of Second class kail wood in planks 250mm wide and 38mm thick 40x1.50x0.25xx0.038 = 0.57 cum or 570 cudm Qty taken for cost of using once after deducting credit 570x0.25x0.25=35.625 cudm or 0.035265 cum Safeda ballies 125 mm diameter 40x1.50 = 60m Qty taken for cost of using once after deducting credit 60x0.25x0.25 = 3.75m CARRIAGE : Poling board : 0.57 cum Ballies struts - 40x 3.14/4x(0.125)^2=0.40 cum Total of carriage = 1.31 x 1 / 4 = 0.3275 cum Carraige of Timber LABOUR: Carpenter 2nd class Beldar Sundries

cum

0.03563

25000.00

3.75

37.00

cum

0.3275

100.11

Day Day L.S.

0.25 0.50 33.15

273.00 247.00 1.49 Total: 1303.43

metre

Add water charges @ 1% on

Add C.P & OH @15% on 1316.46 Cost for 45.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 33.64 Rs 33.65

Item Code: 2.22.3 Open timbering over areas including strutting, shoring etc. complete.. -Depth exceeding 3 m but not exceeding 4.5 m

Code

DSR-12

Description

Details of Cost for : 45.00 Sqm Unit Quantity

Rate

Page 34 of 2298

MATERIALS: The material can be used for four times on the same work and after use of material credit is given @ 75% of cost

1198

0302

2204 0112 0114 9999

Poling board of Second class kail wood in planks 250mm wide and 38mm thick 40x1.50x0.25xx0.038 = 0.57 cum or 570 cudm Qty taken for cost of using once after deducting credit 570x0.25x0.25=35.625 cudm or 0.035265 cum Safeda ballies 125 mm diameter 40x1.50 = 60m Qty taken for cost of using once after deducting credit 60x0.25x0.25 = 3.75m CARRIAGE : Poling board : 0.57 cum Ballies struts - 40x 3.14/4x(0.125)^2=0.40 cum Total of carriage = 1.31 x 1 / 4 = 0.3275 cum Carraige of Timber LABOUR: Carpenter 2nd class Beldar Sundries

cum

0.03563

25000.00

3.75

37.00

cum

0.3275

100.11

Day Day L.S.

0.50 0.88 47.58

273.00 247.00 1.49 Total: 1487.04

metre

Add water charges @ 1% on

Add C.P & OH @15% on 1501.91 Cost for 45.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 38.38 Rs 38.40

Item Code: 2.23 Extra for planking and strutting in open timbering if required to be left permanently in position. Details of Cost for : 90.00 Sqm Code Description Unit Quantity Rate MATERIALS: Poling board of 1198 Second class kail wood in planks cum 0.9975 25000.00 1.50mx0.25mx0.038m 2x40x1.5x0.25x0.038 = 1.14cum = 1140 cudm Less @ 1/8 of Qty as timber is supposed to be used once before 1140 - 142.50 = 997.50 cudm or 0.9975 cum

1197

0302

DSR-12

Walling 100mmx100mm : Second class kail wood in scantling cum 4x30mx0.10mx0.10m =1.20cum or 1200 cudm Less @ 1/8 of Qty as timber is supposed to be used once before =1200 - 150 = 1050 cudm or 1.05 cum

Struts of Safeda ballies 125 mm diameter 2x17x1.50m=51m

metre

1.05

25000.00

44.63

37.00

Page 35 of 2298

Less @ 1/8 of Qty as timber is supposed to be used once before =51 - 6.37 = 44.63m CARRIAGE :

2204

Poling board : 1.14 cum Walling : 1.20 cum Ballies struts - 3.14/4x(0.125)^2 : 0.63 cum Total of carriage = 2.97 Taking half = 2.97 / 2 = 1.485 cum Carraige of Timber LABOUR:

cum

1.485

100.11

Add water charges @ 1% on

Total: 52987.47

Add C.P & OH @15% on 53517.34 Cost for 90.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 683.83 Rs 683.85

Item Code: 2.25 Filling available excavated earth (excluding rock) .. .. Code 0128 0115 0101

Details of Cost for : 10.00 Cum Unit Quantity

Description LABOUR: Mate Coolie Bhisthi

Day Day Day

0.20 2.50 0.20

Add water charges @ 1% on

Rate 260.00 247.00 260.00 Total: 721.50

Add C.P & OH @15% on 728.72 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 83.80 Rs 83.80

Item Code: 2.26.1 Extra for every additional lift of 1.5 m or part thereof in: All kinds of soil. Code 0128 0114

Description LABOUR: Mate Beldar

Details of Cost for : 10.00 Cum Unit Quantity Day Day

0.10 1.10

Add water charges @ 1% on

Rate 260.00 247.00 Total: 297.70

Add C.P & OH @15% on 300.68 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 34.58 Rs 34.60

Item Code: 2.26.2 Extra for every additional lift of 1.5 m or part thereof in: Ordinary / hard rock Details of Cost for : 10.00 Cum

DSR-12

Page 36 of 2298

Code 0128 0114

Description LABOUR: Mate Beldar

Unit

Quantity

Rate

Day Day

0.20 1.95

260.00 247.00 Total: 533.65

Add water charges @ 1% on

Add C.P & OH @15% on 538.99 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 61.98 Rs 62.00

Item Code: 2.27 S/F in plinth with river sand under floors .. .. Code 6501 2335 0114 0115 0101

Description MATERIALS: Jamuna sand Carriage of Jamuna sand LABOUR: Beldar Coolie Bhishti

Details of Cost for : 10.00 Cum Unit Quantity

Rate

cum cum

10.00 10.00

500.00 87.60

Day Day Day

0.89 1.07 0.35

247.00 247.00 260.00 Total: 6451.12

Add water charges @ 1% on

Add C.P & OH @15% on 6515.63 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 749.30 Rs 749.30

Item Code: 2.28.1 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50m and lift upto 1.5m All kinds of soil.

Code 0114 0115

Description LABOUR: Beldar Coolie

Details of Cost for : 100.00 Sqm Unit Quantity Day Day

1.97 1.29

Add water charges @ 1% on

Rate 247.00 247.00 Total: 805.22

Add C.P & OH @15% on 813.27 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 935.26 Rs 935.25

Item Code: 2.29.1 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. - All kinds of soil Details of Cost for : 100.00 Sqm Code Description Unit Quantity LABOUR: 0114 Beldar Day 2.75

DSR-12

Rate 247.00

Page 37 of 2298

0101

Bhisti

Day

0.50

Add water charges @ 1% on

260.00 Total: 809.25

Add C.P & OH @15% on 817.34 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 939.94 Rs 939.95

Item Code: 2.30.1 Excavating holes more than 0.10 cum & upto 0.5 cum then returning the soil as required in layers -All kinds of soil.

Code

02.008.01

Description Details of cost for 10 holes Earth work 10 x 0.30 (Avge) = 3.00cum Rate as per Item 2.8.1 E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Extra labour for ramming

Details of Cost for : 10.00 Nos Unit Quantity

Rate

Cum

3.00

130.78

L.S.

13.52

1.49 Total: 20.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 20.34 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 41.57 Rs 41.60

Item Code: 2.30.2 Excavating holes more than 0.10 cum & upto 0.5 cum then returning the soil as required in layers Ordinary Rock

Code

02.009.01 9999

Description Details of cost for 10 holes Earth work 10 x 0.30 (Avge) = 3.00cum Rate as per Item 2.8.1 E/W excavation in foundation trenches .. .. Ordinary rok Extra labour for ramming

Details of Cost for : 10.00 Nos Unit Quantity

Cum L.S.

3.00 13.52

Add water charges @ 1% except on [A] i.e on

Rate

212.00 1.49 Total: 20.14

Add C.P & OH @15% except on [A] i.e on 20.34 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 65.94 Rs 65.85

Item Code: 2.30.3 Excavating holes more than 0.10 cum & upto 0.5 cum then returning the soil as required in layers - Hard rock (Requiring blasting)

Code

DSR-12

Description Details of cost for 10 holes Earth work 10 x 0.30 (Avge) = 3.00cum Rate as per Item 2.8.1

Details of Cost for : 10.00 Nos Unit Quantity

Rate

Page 38 of 2298

02.009.02 9999

E/W excavation in foundation trenches .. .. Hard rock Cum (requiring blasting) Extra labour for ramming L.S.

3.00

378.82

13.52

1.49 Total: 20.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 20.34 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 115.99 Rs 116.00

Item Code: 2.30.4 Excavating holes more than 0.10 cum & upto 0.5 cum then returning the soil as required in layers - Hard rock blasting prohibited

Code

02.009.03 9999

Details of Cost for : 10.00 Nos Description Unit Quantity Details of cost for 10 holes Earth work 10 x 0.30 (Avge) = 3.00cum Rate as per Item 2.8.1 E/W excavation in foundation trenches .. .. Hard rock (blasting Cum 3.00 prohibited) Extra labour for ramming L.S. 13.52 Add water charges @ 1% except on [A] i.e on

Rate

491.97 1.49 Total: 20.14

Add C.P & OH @15% except on [A] i.e on 20.34 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 149.93 Rs 149.90

Item Code: 2.31 Clearing jungle including uprooting of rank vegetation...girth upto 30cm measured ..removal of rubbish.. Details of Cost for : 100.00 Sqm Code Description Unit Quantity 0114 Beldar Day 1.08 0115 Coolie Day 0.60 Add water charges @ 1% on

Rate 247.00 247.00 Total: 414.96

Add C.P & OH @15% on 419.11 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 481.98 Rs 482.00

Item Code: 2.32 Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Code 0114 0115 9999

DSR-12

Description LABOUR: Beldar Coolie Sundries

Details of Cost for : 100.00 Sqm Unit Quantity Day Day L.S.

0.60 0.25 1.82

Rate 247.00 247.00 1.49 Total:

Page 39 of 2298

Add water charges @ 1% on

212.66

Add C.P & OH @15% on 214.79 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 247.01 Rs 247.00

Item Code: 2.33.1 Felling of trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 30 cm girth up to and including .

Code

0114 0115 9999

Details of Cost for : 1.00 No. Unit Quantity

Description Details of cost of tree of 15cm. in. dia. Ht. = av. 3m quantity of wood3.14/4x0.15x0.15x3 = 0.053 cum. Add 20% for branches = 0.011 cum. Total = 0.064 cum. Labour for cutting in trees removing the roots from the soil and then filling in Pit and depresions. Beldar Coolie Sundries

Day Day L.S.

0.33 0.17 2.73

Add water charges @ 1% on

Rate

247.00 247.00 1.49 Total: 127.57

Add C.P & OH @15% on 128.85 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 148.18 Rs 148.20

Item Code: 2.33.2 Felling of trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 60 cm girth upto and including ..

Code

0114 0115 9999

Description Details of cost of a tree- of av. girth = 90cm of av. dia. = 0.3m and length = 5m (22x0.3x0.3x5)/7x4 = 0.35 cum 20% branches = 0.07 cum Total = 0.42 cum Labour for cutting the trees and removing in roots from the soil filling in pit and the depresions Beldar Coolie Sundries

Details of Cost for : 1.00 No. Unit Quantity

Day Day L.S.

1.50 0.75 5.46

Add water charges @ 1% on

Rate

247.00 247.00 1.49 Total: 563.89

Add C.P & OH @15% on 569.53 Cost for 1.00 No.

DSR-12

Page 40 of 2298

Rate per Each: Rate as per DSR-12:

Rs 654.96 Rs 654.95

Item Code: 2.33.3 Felling of trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 120 cm girth upto and including 2

Code

0114 0115 9999

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for a tree- avg. girth = 180cm and avg. length = 7m (22x0.6x0.6x7)/7x4 = 1.98 cum.+ 20% branches = 0.40 cum. Total = 2.38 cum. Labour for cutting the trees and removing in roots from the soil filling in pit and the depresions Beldar Day Coolie Day Sundries L.S.

7.00 3.50 8.06

Add water charges @ 1% on

Rate

247.00 247.00 1.49 Total: 2605.51

Add C.P & OH @15% on 2631.57 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3026.31 Rs 3026.30

Item Code: 2.33.4 Felling trees of the girth - Above 240 cm girth Code

0114 0115 9999

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for a tree of average girth 300cm, average dia 1.00m and length 10m LABOUR : Quantity of wood (22 x 1 x 1 x 10)/7 x 4 = 7.86 cum 20% branches = 1.57 cum Total = 9.43 cum Labour for cutting for cutting the tree and removing in roots from the soil filling in pit and the depressions Beldar Coolie Sundries

Day Day L.S.

14.00 7.00 26.91

Add water charges @ 1% on

Rate

247.00 247.00 1.49 Total: 5227.10

Add C.P & OH @15% on 5279.37 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6071.28 Rs 6071.30

Item Code: 2.34.1

DSR-12

Page 41 of 2298

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Details of Cost for : 100.00 Ltr Code Description Unit Quantity Rate 7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. litre 100.00 160.00 2342 Carraige of Solvent (Chlorpyriphos) quint 1.00 8.76 Total: Add water charges @ 1% on 16008.76 Add C.P & OH @15% on 16168.85 Cost for 100.00 Ltr Rate per One Litre: Rate as per DSR-12:

Rs 185.94 Rs 185.95

Item Code: 2.35.1.1 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Along external wall - With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Details of Cost for : 10.00 m Code Description Unit Quantity Rate Chlorpyriphos 1% EC =10.0x0.30x7.5 =22.50 litres Chlorpyriphos 20% EC required = 22.50 / 20 = 1.125 ltres (To be supplied at free of cost) 0114 Beldar Day 0.33 247.00 (For excavating channel ) rodding in chemical spraying the emulsion and refilling the same 9999 Sundries and rent for sprayer etc., L.S. 13.52 1.49 Total: Add water charges @ 1% on 101.65 Add C.P & OH @15% on 102.67 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 11.81 Rs 11.80

Item Code: 2.35.2.1 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Along the external wall below concrete or masonry - With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Code

0114 9999

Description

Details of Cost for : 10.00 m Unit Quantity

Chlorpyriphos 1% EC =10.0x2.25 =22.50 litres Chlorpyriphos 20% EC required = 22.50 / 20 = 1.125 ltres (To be supplied at free of cost) Beldar Day (for drilling holes and injecting chemical) Sundries and rent for sprayer, cost of mortart and making L.S. good the holes etc.,

Rate

0.40

247.00

35.88

1.49

Add water charges @ 1% on

Total: 152.26

Add C.P & OH @15% on 153.78 Cost for 10.00 m Rate per One Metre:

DSR-12

Rs 17.69

Page 42 of 2298

Rate as per DSR-12:

Rs 17.70

Item Code: 2.35.3.1 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Treatment of soil under existing floors - With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Code

0114 0124 9999

Details of Cost for : 9.00 Sqm Description Unit Quantity Details of cost for 9sqm (3.00m x 3.00 m) , No. of holes - 100 nos.

Chlorpyriphos 1% EC =100x1 =100 litres Chlorpyriphos 20% EC required = 100 / 20 = 5 ltres (To be supplied at free of cost) LABOUR: Beldar Day (For MAKING HOLES and spraying) Mason (brick layer) 2nd class Day Sundries and rent for sprayer and cost of mortar etc., L.S.

Rate

2.00

247.00

0.50 35.88

273.00 1.49 Total: 683.96

Add water charges @ 1% on

Add C.P & OH @15% on 690.80 Cost for 9.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 88.27 Rs 88.25

Item Code: 2.35.4.1 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Treatment of existing masonry - With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Code

0114

0124 9999

Details of Cost for : 10.00 m Description Unit Quantity No. of holes 10/0.3 +1 = 34.33 say 34 holes Chlorpyriphos 1% EC =34x1 = 34 litres Chlorpyriphos 20% EC required = 34 / 20 = 1.70 ltres (To be supplied at free of cost) LABOUR: Beldar Day 0.30 (For MAKING HOLES at 45 degrees and spraying the emulsion) Mason (brick layer) 2nd class Sundries and rent of pump etc.,

Day L.S.

0.05 17.94

Add water charges @ 1% on

Rate

247.00

273.00 1.49 Total: 114.48

Add C.P & OH @15% on 115.62 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 13.30 Rs 13.30

Item Code: 2.35.5

DSR-12

Page 43 of 2298

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Treatment at points of contact of wood work by chemical_x000D_ emulsion Chlorpyriphos/ Lindane (in oil or kerosene based_x000D_ Details of Cost for : 10.00 m Code Description Unit Quantity Rate No. of holes 10/0.15 +1 = 67.67 say 68 holes Chlordane 1% EC required =68x0.5 = 34 litres Chlorpyriphos 20% EC required = 34 / 20 = 1.70 ltres (To be supplied at free of cost) KEROSENE OIL REQUIRED = 34 - 1.7 = 32.30 LITRES 0771 Kerosene oil litre 32.30 30.00 0112 Carpenter 2nd class Day 0.20 273.00 (For making holes and plugging the same) 0114 Beldar Day 0.20 247.00 (For injecting the chemical) 9999 Sundries and rent of pump etc., L.S. 17.94 1.49 Total: Add water charges @ 1% on 1099.73 Add C.P & OH @15% on 1110.73 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 127.73 Rs 127.75

Item Code: 2.36 Deduct not levelled and nealty dressed. Code 0128 0115

Details of Cost for : 10.00 Cum Unit Quantity

Description LABOURMate Beldar/Coolie

Day Day

-0.08 -0.80

Add water charges @ 1% on

Rate 260.00 247.00 Total: -218.40

Add C.P & OH @15% on -220.58 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

-Rs 25.37 -Rs 25.35

Item Code: 2.37 Supply and stacking of Fly ash conforming to IRC- 58 at site, including carriage, loading , unloading & stacking up to any lead

Code

Description Ref : Based on DAR item No. : 1.1.1 A ii) Labour and carriage

1980 2262

Fly ash Carraige of Fly ash

Details of Cost for : 1.00 Cum Unit Quantity

cum cum

1.00 1.00

Add water charges @ 1% on

Rate

7.75 87.60 Total: 95.35

Add C.P & OH @15% on 96.30 Cost for 1.00 Cum Rate per One Cum:

DSR-12

Rs 110.75

Page 44 of 2298

Rate as per DSR-12:

Rs 110.75

Item Code: 2.38 Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm),

Code

0128 0115 0101

Description Ref : Based on DAR Item No. 2.25 LABOUR : Mate Coolie Bhisti

Details of Cost for : 10.00 Cum Unit Quantity

Day Day Day

0.20 2.50 0.20

Add water charges @ 1% on

Rate

260.00 247.00 260.00 Total: 721.50

Add C.P & OH @15% on 728.72 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 83.80 Rs 83.80

Item Code: 4.1.1 P/L CC excluding centering - All work up to plinth level: _x000D_ Code 0295 0297 2202 0982 2203 0367 2209 0155 0114 0101 0002 0012 9999

Description MATERIALS: Stone aggregate 20mm Stone aggregate 10mm Carriage of 20mm aggregate Coarse sand Carriage of coarse sand Cement (Qty of cement : 0.425 cum) Carriage of cement LABOUR: Mason (avge) Beldar Bhisthi Hire running charges of concrete mixer Vibrator (Hire charges) Sundries

Details of Cost for : 1.00 Cum Unit Quantity

Rate

cum cum cum cum cum tonne

0.64 0.21 0.85 0.425 0.425 0.61

1050.00 1050.00 87.60 1120.00 87.60 5000.00

tonne

0.61

77.87

0.10 1.63 0.70 0.07 0.07 14.30

287.00 247.00 260.00 800.00 300.00 1.49 Total: 5289.31

Day Day Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 5342.20 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6143.53 Rs 6143.55

Item Code: 4.1.2 P/L CC excluding centering - All work up to plinth level: 1:1½:3 - Coarse sand, 20mmstone aggregate.. .. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 0295 Stone aggregate 20mm cum 0.57 0297 Stone aggregate 10mm cum 0.28

DSR-12

Rate 1050.00 1050.00

Page 45 of 2298

2202 0982 2203 0367 2209 0155 0114 0101 0002 0012 9999

Carriage of aggregate Coarse sand Carriage of coarse sand Cement (0.2833 cum) Carriage of cement LABOUR: Mason Beldar Bhishti Mixer Vibrator Sundries

cum cum cum tonne tonne

0.85 0.425 0.425 0.40 0.40

87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day L.S.

0.10 1.63 0.70 0.07 0.07 14.30

287.00 247.00 260.00 800.00 300.00 1.49 Total: 4222.96

Add water charges @ 1% on

Add C.P & OH @15% on 4265.19 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4904.97 Rs 4904.95

Item Code: 4.1.3 P/L CC excluding centering - All work up to plinth level: 1:2:4 - Coarse sand, 20mmstone aggregate.. .. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS: 0295 Stone aggregate 20mm cum 0.67 0297 Stone aggregate 10 mm cum 0.22 2202 Carriage of aggregate cum 0.89 0982 Coarse sand cum 0.445 2203 Carriage of coarse sand cum 0.445 0367 Cement (0.2833 cum) tonne 0.32 2209 Carriage of cement tonne 0.32 LABOUR: 0155 Mason Day 0.10 0114 Beldar Day 1.63 0101 Bhishti Day 0.70 0002 Mixer Day 0.07 0012 Vibrator Day 0.07 9999 Sundries L.S. 14.30 Add water charges @ 1% on

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49 Total: 3886.38

Add C.P & OH @15% on 3925.24 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4514.03 Rs 4514.05

Item Code: 4.1.4 P/L CC excluding centering - All work up to plinth level: 1:2:4 - Coarse sand, 40mmstone aggregate.. .. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 0293 Stone aggregate 40mm (one size) (0.56-7.5% for voids) i.e. cum 0.52 0.04 = 0.52 cum) 0295 Stone aggregate 20mm (one size) cum 0.22 0297 Stone aggregate 10mm (one size) cum 0.11

DSR-12

Rate 950.00 1050.00 1050.00

Page 46 of 2298

2206 2202 0982 2203 0367 2209 0155 0114 0101 0002 0012 9999

Carriage of aggregate 40mm Carriage of aggregate below 40mm size cum Coarse sand Carriage of coarse sand Cement (0.2225 cum) Carriage of cement LABOUR: Mason Beldar Bhishti Mixer Vibrator Sundries

cum cum cum cum tonne tonne

0.52 0.33 0.445 0.445 0.32 0.32

95.22 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day L.S.

0.10 1.63 0.70 0.07 0.07 13.52

287.00 247.00 260.00 800.00 300.00 1.49 Total: 3791.67

Add water charges @ 1% on

Add C.P & OH @15% on 3829.59 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4404.03 Rs 4404.05

Item Code: 4.1.5 P/L CC excluding centering - All work up to plinth level: 1:3:6 - Coarse sand, 20mmstone aggregate.. .. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 0295 Stone aggregate 20mm cum 0.70 0297 Stone aggregate 10 mm cum 0.24 2202 Carriage of aggregate cum 0.94 0982 Coarse sand cum 0.47 2203 Carriage of coarse sand cum 0.47 0367 Cement (0.15674 cum) tonne 0.22 2209 Carriage of cement tonne 0.22 LABOUR: 0155 Mason Day 0.10 0114 Beldar Day 1.63 0101 Bhishti Day 0.70 0002 Mixer Day 0.07 0012 Vibrator Day 0.07 9999 Sundries L.S. 13.52 Add water charges @ 1% on

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49 Total: 3464.49

Add C.P & OH @15% on 3499.13 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4024.00 Rs 4024.00

Item Code: 4.1.6 P/L CC excluding centering - All work up to plinth level: 1:3:6 - Coarse sand, 40mmstone aggregate.. .. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 0293 Stone aggregate 40mm (one size) (0.70 cum 0.65 cum-7.5% for voids i.e. 0.05 = 0.65 cum 0295 Stone aggregate 20mm cum 0.24

DSR-12

Rate 950.00 1050.00

Page 47 of 2298

2206 2202 0982 2203 0367 2209 0155 0114 0101 0002 0012 9999

Carriage of aggregate 40mm Carriage of aggregate 20mm Coarse sand Carriage of coarse sand Cement (0.15674 cum) Carriage of cement LABOUR: Mason Beldar Bhishti Mixer Vibrator Sundries

cum cum cum cum tonne tonne Day Day Day Day Day L.S.

0.65 0.24 0.47 0.47 0.22 0.22

95.22 87.60 1120.00 87.60 5000.00 77.87

0.10 1.63 0.70 0.07 0.07 13.52

287.00 247.00 260.00 800.00 300.00 1.49 Total: 3347.56

Add water charges @ 1% on

Add C.P & OH @15% on 3381.04 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3888.20 Rs 3888.20

Item Code: 4.1.7 P/L CC excluding centering - All work up to plinth level: 1:3:6 - Fine sand, 40mmstone aggregate.. .. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 0293 Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum 0.65 i.e. 0.05 = 0.65 cum 0295 Stone aggregate 20 mm (one size) cum 0.24 2206 Carriage of aggregate 40mm cum 0.65 2202 Carriage of aggregate 20mm cum 0.24 0983 Fine sand cum 0.47 2261 Carriage of fine sand cum 0.47 0367 Cement (0.15674 cum) tonne 0.22 2209 Carriage of cement tonne 0.22 LABOUR: 0155 Mason Day 0.10 0114 Beldar Day 1.63 0101 Bhishti Day 0.70 0002 Mixer Day 0.07 0012 Vibrator Day 0.07 9999 Sundries L.S. 13.52 Add water charges @ 1% on

Rate 950.00 1050.00 95.22 87.60 640.00 87.60 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49 Total: 3121.96

Add C.P & OH @15% on 3153.18 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3626.16 Rs 3626.15

Item Code: 4.1.8 P/L CC excluding centering - All work up to plinth level: 1:4:8 - Coarse sand, 40mmstone aggregate.. .. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS :

DSR-12

Rate

Page 48 of 2298

0293 0295 2206 2202 0982 2261 0367 2209 0155 0114 0101 0002 0012 9999

Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum i.e. 0.05 = 0.65 cum Stone aggregate 20 mm cum Carriage of aggregate 40mm cum Carriage of aggregate 20mm cum Corase sand cum Carriage of coarse sand cum Cement (0.1175 cum) tonne Carriage of cement tonne LABOUR: Mason Day Beldar Day Bhishti Day Mixer Day Vibrator Day Sundries L.S.

0.65

950.00

0.24 0.65 0.24 0.47 0.47 0.17 0.17

1050.00 95.22 87.60 1120.00 87.60 5000.00 77.87

0.10 1.63 0.70 0.07 0.07 13.52

287.00 247.00 260.00 800.00 300.00 1.49 Total: 3093.67

Add water charges @ 1% on

Add C.P & OH @15% on 3124.61 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3593.30 Rs 3593.30

Item Code: 4.1.9 P/L in position CC all work upto plinth 1:4:8, 40 mm stone agg with fine sand Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 0293 Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum 0.65 i.e. 0.05 = 0.65 cum 0295 Stone aggregate 20 mm (One size) cum 0.24 2206 Carriage of aggregate 40mm cum 0.65 2202 Carriage of aggregate 20mm cum 0.24 0983 Fine sand cum 0.47 2261 Carriage of fine sand cum 0.47 0367 Cement (0.1175 cum) tonne 0.17 2209 Carriage of cement tonne 0.17 LABOUR: 0155 Mason Day 0.10 0114 Beldar Day 1.63 0101 Bhishti Day 0.70 0002 Mixer Day 0.07 0012 Vibrator Day 0.07 9999 Sundries L.S. 13.52 Add water charges @ 1% on

Rate 950.00 1050.00 95.22 87.60 640.00 87.60 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49 Total: 2868.07

Add C.P & OH @15% on 2896.75 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3331.26 Rs 3331.25

Item Code: 4.1.10 P/L CC excluding centering - All work up to plinth level: 1:5:10 - Coarse sand, 40mmstone aggregate.. .. Details of Cost for : 1.00 Cum

DSR-12

Page 49 of 2298

Code 0293 0295 2206 2202 0982 2203 0367 2209 0155 0114 0101 0002 0012 9999

Description Unit MATERIALS : Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum i.e. 0.05 = 0.65 cum Stone aggregate 20 mm (One size) cum Carriage of aggregate 40mm cum Carriage of aggregate 20mm cum Coarse sand cum Carraige of Coarse sand cum Cement (0.2225 cum) tonne Carriage of cement tonne LABOUR: Mason Day Beldar Day Bhishti Day Mixer Day Vibrator Day Sundries L.S.

Quantity

Rate

0.65

950.00

0.24 0.65 0.24 0.47 0.47 0.13 0.13

1050.00 95.22 87.60 1120.00 87.60 5000.00 77.87

0.10 1.63 0.70 0.07 0.07 13.52

287.00 247.00 260.00 800.00 300.00 1.49 Total: 2890.55

Add water charges @ 1% on

Add C.P & OH @15% on 2919.46 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3357.38 Rs 3357.40

Item Code: 4.1.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 - Fine sand, 40mmstone aggregate.. .. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 0293 Stone aggregate 40mm (one size) (0.70 cum 0.65 cum-7.5% for voids i.e. 0.05 = 0.65 cum 0295 Stone aggregate 20 mm (One size) cum 0.24 2206 Carriage of aggregate 40mm cum 0.65 2202 Carriage of aggregate 20mm cum 0.24 0983 Fine sand cum 0.47 2261 Carriage of fine sand cum 0.47 0367 Cement (0.2225 cum) tonne 0.13 2209 Carriage of cement tonne 0.13 LABOUR: 0155 Mason Day 0.10 0114 Beldar Day 1.63 0101 Bhishti Day 0.70 0002 Mixer Day 0.07 0012 Vibrator Day 0.07 9999 Sundries L.S. 8.97 Add water charges @ 1% on

Rate 950.00 1050.00 95.22 87.60 640.00 87.60 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49 Total: 2658.18

Add C.P & OH @15% on 2684.76 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3087.47 Rs 3087.45

Item Code: 4.1.12

DSR-12

Page 50 of 2298

P/L in position CC all work upto plinth 1:2:3.5:9, fly ash, cs, 40 mm stone aggregate Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS: 0293 Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum 0.65 i.e. 0.05-0.65 cum) 0295 Stone aggregate 20 mm (one size) cum 0.24 2206 Carriage of aggregate 40 mm cum 0.65 2202 Carriage of agregate 20 mm cum 0.24 0982 Coarse sand cum 0.37 2203 Carriage of coarse sand cum 0.37 1980 Fly ash cum 0.21 2262 Carriage of fly ash cum 0.21 0367 Cement tonne 0.17 2209 Carriage of cement tonne 0.17 LABOUR: 0155 Mason Day 0.10 0114 Beldar Day 1.63 0101 Bhishti Day 0.70 0002 Mixer Day 0.07 0012 Vibrator Day 0.07 9999 Sundries L.S. 14.30 Add water charges @ 1% on

Rate 950.00 1050.00 95.22 87.60 1120.00 87.60 7.75 87.60 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49 Total: 2994.11

Add C.P & OH @15% on 3024.05 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3477.66 Rs 3477.65

Item Code: 4.1.13 P/L in position CC all work upto plinth 1:2.5:4:11, fly ash, cs, 40 mm stone aggregate Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 0293 Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum 0.65 i.e. 0.05 - 0.65 cum) 0295 Stone aggregate 20 mm (one size) cum 0.24 2206 Carriage of aggregate 40mm cum 0.65 2202 Carriage of aggregate 20mm cum 0.24 0982 Coarse sand cum 0.34 2203 Carriage of coarse sand cum 0.34 1980 Fly ash cum 0.21 2262 Carriage of fly ash cum 0.21 0367 Cement tonne 0.13 2209 Carriage of cement tonne 0.13 LABOUR: 0155 Mason Day 0.10 0114 Beldar Day 1.63 0101 Bhishti Day 0.70 0002 Mixer Day 0.07 0012 Vibrator Day 0.07 9999 Sundries L.S. 14.30 Add water charges @ 1% on

Rate 950.00 1050.00 95.22 87.60 1120.00 87.60 7.75 87.60 5000.00 77.87 287.00 247.00 260.00 800.00 300.00 1.49 Total: 2754.76

Add C.P & OH @15% on 2782.31 Cost for 1.00 Cum

DSR-12

Page 51 of 2298

Rate per One Cum: Rate as per DSR-12:

Rs 3199.66 Rs 3199.65

Item Code: 4.2.1 P/L CC walls, columns, string courses, coping, bed blocks, window sills etc. up to floor five level excluding centering, shuttering finishing : 1:1:2 (Coarse sand - stone aggregate 20mm)

Code 0295 0297 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0002 0012 9999 9999 0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone aggregate 20mm Stone aggregate 10 mm Carriage of aggregate 20mm and 10 mm Coarse sand Carriage of coarse sand Cement (0.425 cum) Carriage of cement Labour: Beldar Coolie Bhishti Mason 1st class Mason Ilnd class Mixer Vibrator Scaffolding Sundries (Extra labour for lifting of materials up to floor five level)

cum cum cum cum cum tonne tonne

Rate

0.64 0.21 0.85 0.425 0.425 0.61 0.61

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

0.90 0.78 0.70 0.06 0.06 0.07 0.07 114.40 14.30 1.88

247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49 247.00

Add water charges @ 1% on

Total: 5942.22

Day Day Day Day Day Day Day L.S. L.S. Day

Add C.P & OH @15% on 6001.64 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6901.89 Rs 6901.90

Item Code: 4.2.2 P/L CC walls, coping, bed blocks, window sills etc. up to floor five level excluding centering, shuttering finishing : 1:1½:3 (Coarse sand - stone aggregate 20mm) Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS: 0295 20mm stone aggregate cum 0.57 1050.00 0297 Stone aggregate 10mm cum 0.28 1050.00 2202 Carriage of aggregate cum 0.85 87.60 0982 Coarse sand cum 0.425 1120.00 2203 Carriage of coarse sand cum 0.425 87.60 0367 Cement (0.2833 cum) tonne 0.40 5000.00 2209 Carriage of cement tonne 0.40 77.87 LABOUR: 0114 Beldar Day 0.90 247.00 0115 Coolie Day 0.78 247.00 0101 Bhishti Day 0.70 260.00 0123 Mason 1st class Day 0.06 301.00 0124 Mason Ilnd class Day 0.06 273.00

DSR-12

Page 52 of 2298

0002 0012 9999 9999 0115

Mixer Vibrator Scaffolding Sundries (Extra labour for lifting.material upto floor

Day Day L.S. L.S. Day

0.07 0.07 114.40 14.30 1.88

Add water charges @ 1% on

800.00 300.00 1.49 1.49 247.00 Total: 4875.87

Add C.P & OH @15% on 4924.63 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5663.32 Rs 5663.30

Item Code: 4.2.3 P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level : 1:2:4 (Coarse sand - stone aggregate 20mm)

Code 0295 0297 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0002 0012 9999 9999 0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone aggregate 20 mm Stone aggregate 10 mm Carriage of aggregate Coarse sand Carriage of coarse sand Cement (0.2833 cum) Carriage of cement LABOUR: Beldar Coolie Bhishti Mason 1st class Mason Ilnd class Mixer Vibrator Scaffolding Sundries Coolie Extra labour for lifting material upto floor V level = 0.75 x 2.50 = 1.88

cum cum cum cum cum tonne tonne

Rate

0.67 0.22 0.89 0.445 0.445 0.32 0.32

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day Day Day L.S. L.S.

0.90 0.78 0.70 0.06 0.06 0.07 0.07 114.40 14.30

247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49

Day

1.88

247.00

Add water charges @ 1% on

Total: 4539.29

Add C.P & OH @15% on 4584.68 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5272.38 Rs 5272.40

Item Code: 4.2.4 P/L CC walls, columns, string courses, coping, bed blocks, window sills etc. up to floor five level excluding centering, shuttering finishing : 1:2:4 (Coarse sand - stone aggregate 40mm)

Code 0293

DSR-12

Description

Details of Cost for : 1.00 Cum Unit Quantity

MATERIALS: Stone aggregate 40 mm (one size) (0.56-7.5% for voids i.e. cum 0.04 = 0.52 cum)

0.52

Rate 950.00

Page 53 of 2298

0295 0297 2206 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0002 0012 9999 9999 0115

Stone aggregate 20 mm (one zize) Stone aggregate 10 mm (one size) Carriage of aggregate 40 mm Carriage of aggregate 20 mm and 10 mm Coarse sand Carriage of coarse sand Cement (0.2225 cum) Carriage of cement LABOUR: Beldar Coolie Bhishti Mason 1st class Mason Ilnd class Mixer Vibrator Scaffolding Sundries Coolie (Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

cum cum cum cum cum cum tonne tonne

0.22 0.11 0.52 0.33 0.445 0.445 0.32 0.32

1050.00 1050.00 95.22 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day Day Day L.S. L.S.

0.90 0.78 0.70 0.06 0.06 0.07 0.07 114.40 13.52

247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49

Day

1.88

247.00

Add water charges @ 1% on

Total: 4444.58

Add C.P & OH @15% on 4489.03 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5162.38 Rs 5162.40

Item Code: 4.2.5 P/L CC walls, columns, string courses, coping, bed blocks, window sills etc. up to floor five level excluding centering, shuttering finishing : 1:3:6 (Coarse sand - stone aggregate 20mm)

Code 0295 0297 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0002 0012 9999 9999 0115

DSR-12

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone aggregate 20 mm Stone aggregate Carriage of aggregate Coarse sand Carrage of Coarse sand Cement Carriage of cement LABOUR: Beldar Coolie Bhishti Mason 1st class Mason Ilnd class Mixer Vibrator Scaffolding Sundries Coolie (Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

cum cum cum cum cum tonne tonne

Rate

0.70 0.24 0.94 0.47 0.47 0.22 0.22

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day Day Day L.S. L.S.

0.90 0.78 0.70 0.06 0.06 0.07 0.07 114.40 13.52

247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49

Day

1.88

247.00

Add water charges @ 1% on

Total: 4117.40

Page 54 of 2298

Add C.P & OH @15% on 4158.57 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4782.36 Rs 4782.35

Item Code: 4.2.6 P/L CC in retaining walls, columns, string, bad, coping upto floor 5 level 1 : 3 : 6 - 40 mm stone agg. with coarse sand.

Code 0293 0295 2206 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0002 0012 9999 9999 0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone aggregate 40 mm (one size) (0.70 cum 7.5% for voids i.e. 0.05 = 0.65 cum) Stone aggregate 20 mm (One size) Carriage of aggregate 40 mm Carriage of aggregate 20 mm Coarse sand Carriage of coarse sand Cement (0.15674 cum) Carriage of cement LABOUR: Beldar Coolie Bhishti Mason 1st class Mason Ilnd class Mixer Vibrator Scaffolding Sundries Coolie (Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

Rate

cum

0.65

950.00

cum cum cum cum cum tonne tonne

0.24 0.65 0.24 0.47 0.47 0.22 0.22

1050.00 95.22 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day Day Day L.S. L.S.

0.90 0.78 0.70 0.06 0.06 0.07 0.07 114.40 13.52

247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49

Day

1.88

247.00

Add water charges @ 1% on

Total: 4000.47

Add C.P & OH @15% on 4040.47 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4646.54 Rs 4646.55

Item Code: 4.2.7 P/L CC in retaining walls, columns, string, bad, coping upto floor 5 level 1 : 3 : 6 - 40 mm stone agg. with fine sand.

Code 0293 0295 2206 2202 0983 2261 0367

DSR-12

Description MATERIALS: Stone aggregate 40 mm(one size) (0.70 cum 7.5% for voids i.e. 0.05 = 0.65 cum) Stone aggregate 20 mm Carriage of aggregate 40 mm Carriage of aggregate 20 mm Fine sand Carriage of fine sand Cement (0.15674 cum)

Details of Cost for : 1.00 Cum Unit Quantity

Rate

cum

0.65

950.00

cum cum cum cum cum tonne

0.24 0.65 0.24 0.47 0.47 0.22

1050.00 95.22 87.60 640.00 87.60 5000.00

Page 55 of 2298

2209 0114 0115 0101 0123 0124 0002 0012 9999 9999 0115

Carriage of cement LABOUR: Beldar Coolie Bhishti Mason 1st class Mason Ilnd class Mixer Vibrator Scaffolding Sundries Coolie (Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

tonne

0.22

77.87

Day Day Day Day Day Day Day L.S. L.S.

0.90 0.78 0.70 0.06 0.06 0.07 0.07 114.40 13.52

247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49

Day

1.88

247.00

Add water charges @ 1% on

Total: 3774.87

Add C.P & OH @15% on 3812.62 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4384.51 Rs 4384.50

Item Code: 4.2.8 P/L CC in retaining walls, columns, string, bad, coping upto floor 5 level 1 : 5 : 10 - 40 mm stone agg. with fine sand.

Code 0293 0295 2206 2202 0982 2261 0367 2209 0114 0115 0101 0123 0002 0012 9999 9999 0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone aggregate 40 mm(one size) (0.70 cum 7.5% for voids i.e. 0.05 = 0.65 cum) Stone aggregate 20 mm Carriage of aggregate 40 mm Carriage of aggregate 20 mm Coarse sand (zone III) Carriage of fine sand Cement (0.15674 cum) Carriage of cement LABOUR: Beldar Coolie Bhishti Mason 1st class Hire charges of Concrete Mixer 0.14 cubic metre Vibrator (Needle type 40mm) Scaffolding Sundries Coolie (Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

Rate

cum

0.65

950.00

cum cum cum cum cum tonne tonne

0.24 0.65 0.24 0.47 0.47 0.13 0.13

1050.00 95.22 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day Day L.S. L.S.

0.90 0.78 0.70 0.10 0.07 0.07 114.40 14.30

247.00 247.00 260.00 301.00 800.00 300.00 1.49 1.49

Day

1.88

247.00

Add water charges @ 1% on

Total: 3540.29

Add C.P & OH @15% on 3575.69 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 4112.04 Rs 4112.05

Page 56 of 2298

Item Code: 4.3.1 C/S i/c strutting for Foundation, footing etc Code

7319 7326 7327 7328 7329 7330 9999 9999 0116 0114 9999 9999

Details of Cost for : 10.80 Sqm Description Unit Quantity Details of cost for footing size 2.7mx2.7mxl.00m Contact area = 10.8 sqm. MATERIAL: Assuming shuttering material will become unserviceable after use of 40 times Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost Wall form panel 1250x500mm Qty taken for cost of using once = 16x0.85/40 = 0.34 Corner angle (1.5m long) Qty taken for cost of using once = 4x0.85/40 = 0.085 100mm channel shoulders 2.5m long Qty taken for cost of using once = 8x0.85/40= 0.17 Double clip (bridge clip) Qty taken for cost of using once = 16x0.85/40 = 0.34 Single clip Qty taken for cost of using once = 8x0.85/40 = 0.17 MS tube 40mm - 4x2.7m = 10.8m Qty taken “for cost of using once = 10.8x0.85/40 = 0.2295 Assembly nuts & bolts Carriage LABOUR: Fitter Grade-I Beldar Shuttering oil Sundries

Rate

each

0.34

1050.00

each

0.085

300.00

each

0.17

1160.00

each

0.34

97.00

each

0.17

77.00

0.2295

280.00

L.S. L.S.

22.10 78.00

1.49 1.49

Day Day L.S. L.S.

0.75 1.50 52.00 26.00

301.00 247.00 1.49 1.49 Total: 1551.65

metre

Add water charges @ 1% on

Add C.P & OH @15% on 1567.17 Cost for 10.80 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 166.88 Rs 166.90

Item Code: 4.3.2 Code

7319 7327 7328

DSR-12

Details of Cost for : 15.80 Sqm Description Unit Quantity Details for 7.9m long and 1.00m high wall Area of contact 2x7.9x1.0 = 15.8 sqm. Materials: Assuming shuttering material will be unsevicea- ble after use of times Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost Wall form Panel (1.25x0.5) 2x3x2x2 = 24 Nos Qty taken for cost of using once = 24x0.85/40 =0.51 100mm channel shoulder 2.5m long, 4x2 = 8 Qty taken for cost of using once = 8x0.85/40 = 0.17 Bridge clip 2x6x2 = 24 Qty taken for cost of using once = 24x0.85/40 =0.51

Rate

each

0.51

1050.00

each

0.17

1160.00

each

0.51

97.00

Page 57 of 2298

7329 7330 9999 9999 0116 0114 9999 9999

Single clip 2x3x2 = 12 Qty taken for cost of using once = 12x0.85/40 =0.255 M.S. Tube 40mm 2x2x8m = 32m Qty taken for cost of using once = 32x0.85/40=0.68 Nut & Bolts Carriage LABOUR: Fitter Grade-I Beldar Shuttering oil Sundries

each

0.255

77.00

metre

0.68

280.00

L.S. L.S.

27.62 78.00

1.49 1.49

Day Day L.S. L.S.

3.50 6.00 78.00 52.00

301.00 247.00 1.49 1.49 Total: 3878.78

Add water charges @ 1% on

Add C.P & OH @15% on 3917.57 Cost for 15.80 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 285.14 Rs 285.15

Item Code: 4.3.3 Code

7331 7332 7333 7334 9999 9999 0116 0114 9999 9999

Details of Cost for : 4.50 Sqm Unit Quantity

Description Detail of cost for Size of column 450x450mm and 2.5m high Area of contact = 4x0.45x2.5 = 4.5 sqm. Assuming shuttering will become unserviceable after use of 40 times Add maintenance charges @ 10% of cost of Material Less salvage value of material after full use @ 25% of cost of material Wall form panel (1250x450) Qty taken for cost of using once = 8x0.85/40 = 0.17 Corner angle 2.5m long Qty taken for cost of using once = 4x0.85/40 = 0.085 Column clamp (450-1070mm) Qty taken for cost of using once = 5x0.85/40 = 0.1063 Prop. 2m (2.0-3.5m) Qty taken for cost of using once = 4x0.85/40 = 0.085 Assembly nut & bolt Carriage LABOUR Fitter Grade-I Beldar Shuttering oil Carriage

Rate

each

0.17

1040.00

each

0.085

340.00

each

0.1063

1220.00

each

0.085

830.00

L.S. L.S.

27.62 52.00

1.49 1.49

Day Day L.S. L.S.

1.00 2.00 39.00 26.00

301.00 247.00 1.49 1.49 Total: 1416.42

Add water charges @ 1% on

Add C.P & OH @15% on 1430.58 Cost for 4.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 365.59 Rs 365.60

Item Code: 4.4.1 P/L C.C. in kerb at near ground level: 1 :2 :4 coarse sand, 20 mm stone agg. Details of Cost for : 6.00 Cum

DSR-12

Page 58 of 2298

Code

04.001.03

Description Unit Details of cost for kerb : Type the text here! 100m x 30m x 0.20m = 6.00 cum. P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a (Rate as per item no 4.1.3)

Quantity

Rate

6.00

4514.03

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 6.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4514.03 Rs 4514.05

Item Code: 4.4.2 P/L C.C. in kerb at near ground level: 1 :3 :6 coarse sand, 20 mm sote agg. Code

04.001.05

Details of Cost for : 6.00 Cum Unit Quantity

Description Details of cost for kerb : 100m long 20cm deep and 30cm wide 100m x 30m x 0.20m = 6.00 cum. P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 20mmstone a (Rate as per item no 4.1.5)

Rate

6.00

4024.00

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 6.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4024.00 Rs 4024.00

Item Code: 4.5.1 P/F upto floor five level pre- cast C.C. string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves,louvers, steps, stair cases, etc. :- 1 : 1.5 : 3 - 20 mm stone agg. with coarse sand.

Code

04.001.02

0115

DSR-12

Details of Cost for : 0.45 Cum Description Unit Quantity Details of cost for Plain window sill 15 nos. 15x1m x 0.20m x 0.15m = 0.45cum. MATERIALS : Cement concrete 1:1.5:3 P/L CC excluding centering - All work up to plinth level: 1:1½:3 0.45 - Coarse sand, 20mmstone Extra labour for lifting 0.45x0.45x2.5 = 0.51

Coolie Centering and shuttering (1) Mould (i) Plate 3mm thick(2x1xO.15)+(2xO.15xO.2O) = 0.36 sqm. @ 23.55kg/m2 = 8.48 kg. (ii) Flat 10x5mm

Day

0.51

Rate

4904.97

247.00

Page 59 of 2298

10.001

11.001.02

11.007 9999

4x1.0 = 4.0m 8x0.2 = 1.6m 4x0.15 = 0.60m Handle 2x0.25 = 0.5m =6.70 m @ 0.4kg/m = 2.68 kg. Total = 11.16kg. or 0.112 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = Structural steel work in single section fixed with or without connecting plate including a (Rate as per item no.10.1 S.H. steel work) 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times, (i) Brick on edge flooring cement mortar 1-:6 1x2.0x2.0m = 4 sqm. Qty taken for cost of using once = 4/40 = 0.1 sqm Brick on edge flooring with 75 class designation bricks in cement mortar : 1:6- coarse san (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00x2.00x0.025 = 0.10cum Qty taken for cost of using once = 0.100/40 = 0.0025 cum CC pavement with 1:2:4 with 20mm nominal size stone Cum aggregate .... (G) Mortar and labour for hoisting and finishing L.S.

0.21

59.90

0.10

455.91

0.0025

4725.94

36.30

1.49 Total: 180.06

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 181.86 Cost for 0.45 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5525.24 Rs 5528.25

Item Code: 4.5.2 P/F upto floor five level pre- cast C.C. string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves,louvers, steps, stair cases, etc. :- 1 : 2 : 4 - 20 mm stone agg. with coarse sand.

Code

04.001.03

DSR-12

Details of Cost for : 0.45 Cum Description Unit Quantity Details of cost for Plain window sill 15 nos. 15x1m x 0.20m x 0.15m = 0.45cum. MATERIALS : Cement concrete 1:2:4 P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum 0.45 Coarse sand, 20mmstone a Centering and shuttering (1) Mould (i) Plate 3mm thick (2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @ 23.55kg/m2 = 8.48 kg. (ii) Flat 10x5mm 4x1.0 = 4.0m 8x0.2 = 1.6m 4x0.15 = 0.60m Handle 2x0.25 = 0.5m =6.70m@ 0.4kg/m = 2.68 kg.

Rate

4514.03

Page 60 of 2298

Total = 11.16kg. or 0.112 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = 0.112x0.75/40 = 0.0021 qtl 10.001

Structural steel work in single section fixed with or without connecting plate including a Extra labour for lifting of material 0.45x0.45x2.50=0.51

0.21

59.90

0115

Coolie Day 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times, (i) Brick on edge flooring cement mortar1:6 1x2.0x2.0m = 4 sqm Qty taken for cost of using once = 4/40 =0.1 sqm Brick on edge flooring with 75 class designation bricks in cement mortar : 1:6- coarse san (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00 x2.00x0.025 = 0.1 Qty taken for cost of using once = 0.100/40 = 0.0025 cum CC pavement with 1:2:4 with 20mm nominal size stone Cum aggregate .... (G) Mortar and labour for hoisting and finishing L.S.

0.51

247.00

0.10

455.91

0.0025

4725.94

36.30

1.49 Total: 180.06

11.001.02

11.007 9999

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 181.86 Cost for 0.45 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5134.29 Rs 5137.35

Item Code: 4.5.3 P/F upto floor five level pre- cast C.C. string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves,louvers, steps, stair cases, etc. :- 1 : 3 : 6 - 20 mm stone agg. with coarse sand.

Code

04.001.05

DSR-12

Details of Cost for : 0.45 Cum Description Unit Quantity Details of cost for Plain window sill 15 nos. 15x1m x 0.20m x 0.15m = 0.45cum. MATERIALS : Cement concrete 1:3:6 P/L CC excluding centering - All work up to plinth level: 1:3:6 - Cum 0.45 Coarse sand, 20mmstone a Centering and shuttering (1) Mould (i) Plate 3mm thick (2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @ 23.55kg/m2 = 8.48 kg. (ii) Flat 10x5mm 4x1.0 = 4.0m 8x0.2 = 1.6m 4x0.15 = 0.60m Handle 2x0.25 = 0.5m =6.70m@ 0.4kg/m = 2.68 kg. Total = 11.16kg. or 0.112 qtl.

Rate

4024.00

Page 61 of 2298

Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = 0.112x0.75/40 = 0.0021 qtl 10.001

Structural steel work in single section fixed with or without connecting plate including a Extra labour for lifting of material 0.45x0.45x2.50=0.51

0.21

59.90

0115

Coolie Day 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times, (i) Brick on edge flooring cement mortar1:6 1x2.0x2.0m = 4 sqm Qty taken for cost of using once = 4/40 =0.1 sqm Brick on edge flooring with 75 class designation bricks in cement mortar : 1:6- coarse san (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00 x2.00x0.025 = 0.1 Qty taken for cost of using once = 0.100/40 = 0.0025 cum CC pavement with 1:2:4 with 20mm nominal size stone Cum aggregate .... (G) Mortar and labour for hoisting and finishing L.S.

0.51

247.00

0.10

455.91

0.0025

4725.94

36.30

1.49 Total: 180.06

11.001.02

11.007 9999

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 181.86 Cost for 0.45 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4644.27 Rs 4323.50

Item Code: 4.6.1 P/L C.C. 1 :2 :4 in kerb at ground level . Code

Description

Details of Cost for : 0.60 Cum Unit Quantity

Rate

Finishing 0.4(0.3+0.2+0.20)=0.28x25 = 7.0sqm.

DSR-12

13.016.01 04.001.03

6 mm CP of mix : 1:3 (1 cement: 3 fine sand) Sqm P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum Coarse sand, 20mmstone a Centering and shuttering (1) Mould (i) Plate 3mm thick 0.28 sqm. @ 23.55kg/m2 = 6.59 kg. (ii) Flat 10x5mm Handle 2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg. = 6.79kg. or 0.068 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = 0.068x0.75/40 = 0.001275 qtl

10.001

Structural steel work in single section fixed with or without Kg connecting plate including a

0.00 0.60

101.02 4514.03

0.1275

59.90

Page 62 of 2298

2. Moulding Platform Assuming platform will become unserviceable after use of 40 times. (i) Brick on edge flooring cement mortar 1:6 1x2.0x2.0m = 4 sqm. Qty taken for cost of using once = 4/40 = 0.1 sqm 11.001.02

Brick on edge flooring with 75 class designation bricks in Sqm cement mortar : 1:6- coarse san (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00x2.00x0.025 = 0.10 Qty taken for cost of using once = 0.100/40 = 0.0025 cum

0.10

455.91

11.007

CC pavement with 1:2:4 with 20mm nominal size stone Cum aggregate .... (G) Mortar and labour for finishing L.S.

0.0025

4725.94

30.54

1.49 Total: 45.50

9999

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E] i.e on 45.96 Cost for 0.60 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4710.52 Rs 4712.80

Item Code: 4.7.1 P/F upto floor five level pre- cast C.C. solid block i/c hoisting and setting with C.M. 1 : 3 : 1 : 2 : 4 - 20 mm stone agg. with coarse sand. Details of Cost for : 0.60 Cum Code Description Unit Quantity Rate Details of cost for 25 no blocks, 40x20x30cm =25 no x 0.40m x 0.30m x 0.20m = 0.60 cum MATERIALS: Cement concrete 1:2:4 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.60 4514.03 Coarse sand, 20mmstone a Centering and shuttering (1) Mould (i) Plate 3mm thick 0.28 sqm. @ 23.55kg/m2 = 6.59 kg. (ii) Flat 10x5mm Handle 2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg. = 6.79kg. or 0.068 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = 0.068x0.75/40 = 0.001275 qtl 10.001 Structural steel work in single section fixed with or without 0.1275 59.90 connecting plate including a 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times, (i) Brick on edge flooring cement mortar 1:6

DSR-12

Page 63 of 2298

11.001.02

11.007

03.008

0115 0123 0114

1x2.0x2.0m = 4 sqm. Qty taken for cost of using once = 4/40 = 0.1 sqm Rate as per item no. 11.1.2 S.H.: Flooring Brick on edge flooring with 75 class designation bricks in cement mortar : 1:6- coarse san (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00x2.00x0.025 = 0.10 Qty taken for cost of using once = 0.100/40 = 0.0025 cum CC pavement with 1:2:4 with 20mm nominal size stone aggregate .... Mortar 1:3 for Fixing (D) 0.202/100x25=0.051 Cement mortar 1:3 (1 cement : 3 coarse sand) Extra for Labour for fixing (27/100x25=0.675 or 0.68) (D) Coolie Day Labour for hoisting and setting in position (D) Mason 1st class Day (D) Beldar Day

0.10

455.91

0.0025

4725.94

0.051

4145.53

0.68

247.00

0.60 3.60

301.00 247.00 Total: 1449.18

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 1463.67 Cost for 0.60 Cum Rate per One Cum: Rate as per DSR-12:

Rs 7427.80 Rs 7758.85

Item Code: 4.7.2 P/F upto floor five level pre- cast C.C. solid block i/c hoisting and setting with C.M. 1 : 3 : 1 : 3 : 6 - 20 mm stone agg. with coarse sand. Details of Cost for : 0.60 Cum Code Description Unit Quantity Rate Details of cost for 25 no blocks, 40x20x30cm =25 no x 0.40m x 0.30m x 0.20m = 0.6 cum MATERIALS: (A) Cement concrete 1:3:6 04.001.05 P/L CC excluding centering - All work up to plinth level: 1:3:6 0.60 4024.00 Coarse sand, 20mmstone a 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.051 4145.53 (Rate as per item no. 3.8) Centering and shuttering (1) Mould (i) Plate 3mm thick. 0.28 sqm. @ 23.55kg/m2 = 6.59 kg. (ii) Flat 10x5mm Handle 2x0.25 xO.4 = @ 0.4kg/m = 0.20 kg. = 6.79kg. or 0.068 qtl. Assuming shuttering will become unserviceable after use of 40 times and taking 75% credit. Qty taken for cost of using once = 0.068x0.75/40 = 0.001275 qtl 10.001 Structural steel work in single section fixed with or without 0.1275 59.90 connecting plate including a 2. Moulding Platform Assuming platform will become unserviceable after use of 40 times,

DSR-12

Page 64 of 2298

11.001.02

11.007

0115 0123 0114

(i) Brick on edge flooring cement mortar 1:6 1x2.0x2.0m = 4 sqm. Qty taken for cost of using once = 4/40 = 0.1 sqm Rate as per item no. 11.1.2 S.H.: Flooring Brick on edge flooring with 75 class designation bricks in cement mortar : 1:6- coarse san (ii) 25mm thick cement concrete 1:2:4 in pavement 2.00x2.00x0.025 = 0.100 Qty taken for cost of using once = 0.100/40 = 0.0025 cum CC pavement with 1:2:4 with 20mm nominal size stone aggregate .... Extra Labour for lifting material upto floor V level (C) Labour Coolie Day (C) Labour for hoisting and setting in position Mason 1st class Day Beldar Day

0.10

455.91

0.0025

4725.94

0.68

247.00

0.60 3.60

301.00 247.00 Total: 1449.18

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 1463.67 Cost for 0.60 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6937.77 Rs 6940.05

Item Code: 4.8.1 P/F upto floor five level pre- cast C.C. hollow block i/c hoisting and setting with C.M. 1 : 3. 1 : 2 : 4 - 20 mm stone agg. with coarse sand. Details of Cost for : 0.05 Cum Code Description Unit Quantity Rate Details of cost for one block of overall size 1m x 0.50m and 0.10m thick having 6 vertical hollows, 40x20x30cm finished contents = 1mx0.5mx0.1m = 0.05cum MATERIALS: Cement concrete 1:2:4 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.023 4514.03 Coarse sand, 20mmstone a = 0.023cum (Rate as per Item no. 4.1.3) 9999 (B) Centering and shuttering including T&P charges, hire L.S. 26.91 1.49 charges of steel mould, table vib (C) Extra Labour for lifting material upto floor V level 0115 Coolie Day 0.056 247.00 (C) Labour for hoisting and setting in position 0123 Mason 1st class Day 0.05 301.00 0114 Beldar Day 0.30 247.00 03.007 Cement mortar 1:2 (1 cement : 2 coarse) 0.002 4863.86 (Rate as per item No. 3.7) Total: Add water charges @ 1% except on [A] i.e on 152.81 Add C.P & OH @15% except on [A] i.e on 154.34 Cost for 0.05 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5626.20 Rs 5626.20

Item Code: 4.8.2

DSR-12

Page 65 of 2298

P/F upto floor five level pre- cast C.C. hollow block i/c hoisting and setting with C.M. 1 : 3. 1 : 2 : 4 - 20 mm stone agg. with coarse sand. Details of Cost for : 0.05 Cum Code Description Unit Quantity Rate Details of cost for one block of overall size 1m x 0.50m and 0.10m thick having 6 vertical hollows, 40x20x30cm finished contents = lmx0.5mx0.lm = 0.05cum MATERIALS : Cement concrete 1:3:6 04.001.05 P/L CC excluding centering - All work up to plinth level: 1:3:6 0.023 4024.00 Coarse sand, 20mmstone a = 0.023cum (Rate as per Item no. 4.1.5 ) 9999 (B) Centering and shuttering including T&P charges, hire L.S. 26.91 1.49 charges of steel mould, table vib (D) Extra Labour for lifting material upto floor V level 0115 Coolie Day 0.056 247.00 (D) Labour for hoisting and setting in position 0123 Mason 1 st class Day 0.05 301.00 0114 Beldar Day 0.30 247.00 03.007 Cement mortar 1:2 (1 cement : 2 coarse) 0.002 4863.86 (Rate as per item No. 3.7) Total: Add water charges @ 1% except on [A] i.e on 152.81 Add C.P & OH @15% except on [A] i.e on 154.34 Cost for 0.05 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5400.80 Rs 5400.80

Item Code: 4.9 Precasting and Placing 125 mm dia. Bollards 600 mm high i/c providing MS Pipe Sleeve 50 mm ,300mm long in the Bollard and MS pipe 40 mm, 450mm long with 150x150 x 6 mm MS plate welded at bottom.

Code

05.001.03

05.009.01

10.001

02.008.01

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one bollard MATERIALS : Cement concrete 1:2:4 P/L specified grade of RCC excluding centering, shuttering, 0.007 finishing and reinforcement Rate as per Item no. 5.1.3 SH : RCC ) Centering and shuttering Centering & shuttering including strutting, propping etc. 0.24 Foundations, footings, bases o (Rate as per Item no. 5.9.1 SH : RCC) M.S. pipes (medium class) 50 mm dia sleeve =1x0.30x5.10=1.53 kg 40 mm dia pipe =1x0.45x3.61 =1.62 kg M.S. plate 3mm thick =(0.15x0.15)x23.55 =0.53 kg Structural steel work in single section fixed with or without 3.68 connecting plate including a (Rate as per Item no. 10.1 SH : Steel work) Excavation E/W excavation in foundation trenches .. .. All kinds of soil. 0.03

Rate

4703.91

166.88

59.90

130.78

(Rate as per Item no. 2.8.1 SH : Earth work)

DSR-12

Page 66 of 2298

04.001.05

05.023

9999

P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 20mmstone a (Rate as per Item no. 4.1.5 SH : Cement concrete) Smooth finishing of exposed surface in RCC work with 6 mm CM 1:3. (Rate as per Item no. 5.23) Carriage and fixing charges L.S.

0.03

4024.00

0.25

101.02

13.00

1.49 Total: 19.37

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 19.56 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 465.80 Rs 465.80

Item Code: 4.10 P/L damp-proof course 40mm thick with CC 1:2:4 - Coarse sand - stone aggregate 12.5mm size. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Qty of CC 1:2:4 : 10.00 x 0.04 = 0.40 cum 04.001.03

P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum Coarse sand, 20mmstone a Add Dedut for diffence of cost between 20mm size and 12.5mm size

0295 0296 0123 0124 9999

Stone aggregate 20mm Stone aggregate 12.5mm (one size) Mason I class Mason II class Sundries - Form work etc.,

Rate

0.40

4514.03

cum cum Day Day

0.27 -0.27 0.40 0.40

1050.00 1050.00 301.00 273.00

L.S.

1.95

1.49 Total: 232.51

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 234.84 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 207.57 Rs 207.55

Item Code: 4.11 P/L damp-proof course 40mm thick with CC 1:2:4 - Coarse sand - stone aggregate 20mm size. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Qty of Cement concrete 1:2:4 = 10x0.05 = 0.50 cum 04.001.03

P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum Coarse sand, 20mmstone a Add for delay :

0123 0124 9999

Mason I class Mason II class Sundries (Form work etc.)

Day Day L.S.

0.50

4514.03

0.40 0.40 13.52

301.00 273.00 1.49 Total: 249.74

Add water charges @ 1% except on [A] i.e on

DSR-12

Rate

Page 67 of 2298

Add C.P & OH @15% except on [A] i.e on 252.24 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 254.71 Rs 254.70

Item Code: 4.12 Extra for mixing water proofing material in CC work @ 1 kg per 50kg of cement. Details of Cost for : 1.00 units Code Description Unit Quantity 1213 Water proofing material kilog 1.00 (Approved water proofing’materials according to the recommended proportions) 9999 Carriage of water proofing material and labour for mixing etc. L.S. 3.64

Add water charges @ 1% on

Rate 25.00

1.49 Total: 30.42

Add C.P & OH @15% on 30.72 Cost for 1.00 units Rate per Units: Rate as per DSR-12:

Rs 35.33 Rs 35.35

Item Code: 4.13 Applying a coat of residual petroleum bitumen of penetration 80/100 on damp proof course .. .. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 0309 Paving bitumen S-90 of approved quality tonne 0.017 37000.00 0771 Kerosene oil litre 1.23 30.00 0370 Fuel (steam coal) quint 0.035 400.00 2211 Carraige of Tar bitumen tonne 0.017 87.60 Cleaning surface and applying kerosene oil 0114 0115

0131 9999

Beldar Coolie LABOUR: (For heating the material) Painter (For Spreading hot tar over damp proof course) Sundries (Carriage of kerosene, steam coal, brushes, T&P etc.)

Day Day

0.12 0.07

247.00 247.00

Day

0.20

273.00

L.S.

33.15

1.49

Add water charges @ 1% on

Total: 832.31

Add C.P & OH @15% on 840.63 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 96.67 Rs 96.65

Item Code: 4.14 Extra for concrete work in SS above floor V Code

DSR-12

Description

Details of Cost for : 1.00 Cum Unit Quantity

Rate

Page 68 of 2298

0115

Extra labour element required for lifting of materials (0.75x2.00 = 1.50) Coolie Day

1.50

Add water charges @ 1% on

247.00 Total: 370.50

Add C.P & OH @15% on 374.21 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 430.34 Rs 539.35

Item Code: 4.15 Extra for laying concrete in or under water and/or liquid mud Code

0011 0114

Details of Cost for : 4.20 unit Description Unit Quantity Details of cost for depth of water 0.30 m. Quantity of concrete = 14 cum. pumping hours = 3 hrs. or 0.75 day. Cost of pumping water with 3636.8 litres per hour capacity Day 0.375 pump Beldar for cleaning slush Day 4.00 Add water charges @ 1% on

Rate

500.00 247.00 Total: 1175.50

Add C.P & OH @15% on 1187.26 Cost for 4.20 unit Rate per Units: Rate as per DSR-12:

Rs 325.08 Rs 325.10

Item Code: 4.16 Extra for CC in or under foul position Code 0123 0124 0114 0115

Description Extra labour due to slow progressMason 1st class Mason 2nd class Beldar Coolie

Details of Cost for : 1.00 Cum Unit Quantity Day Day Day Day

0.02 0.02 0.25 0.15

Add water charges @ 1% on

Rate 301.00 273.00 247.00 247.00 Total: 110.28

Add C.P & OH @15% on 111.38 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 128.09 Rs 128.10

Item Code: 4.17 Making plinth protection 50mm thick of CC 1:3:6 - Coarse sand - stone aggregate 20mm -over 75mm bed by dry brick ballast 40mm.

Code 0287 2260

DSR-12

Description MATERIALS Brick aggregate 40 mm size Carriage of brick aggregate

Details of Cost for : 10.00 Sqm Unit Quantity cum cum

0.75 0.75

Rate 500.00 95.22

Page 69 of 2298

0983 2261

Fine sand 60 cu.dm. per 10 sqm Carriage of fine sand Dressing the gound including cutting and filling upto 15cm

0114 0115

Beldar Day Coolie Day Cement concrete 1:3:6 Qty. of cement concrete 1:3:6 on 10 sqm. area = 0.5cum. Materials (for C.C 1:3:6) Stone aggregate 20 mm nominal size cum Stone aggregate 10 mm nominal size cum Carriage of stone aggregate cum Coarse sand cum Carriage of coarse sand cum Cement tonne Carriage of cement tonne Labour (for C.C 1:3:6) Beldar Day Mason 1st class Day Bhisti Day Hire and runing charges of mechanical mixer L.S. Sundries L.S. LABOUR Mason Day Beldar Day Coolie Day

0295 0297 2202 0982 2203 0367 2209 0114 0123 0101 9999 9999 0155 0114 0115

cum cum

0.06 0.06

640.00 87.60

0.16 0.11

247.00 247.00

0.35 0.12 0.47 0.23 0.23 0.11 0.11

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

1.00 0.05 0.33 13.39 6.76

247.00 301.00 260.00 1.49 1.49

0.27 1.08 1.08

287.00 247.00 247.00 Total: 2916.64

Add water charges @ 1% on

Add C.P & OH @15% on 2945.81 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 338.77 Rs 338.75

Item Code: 4.18 Extra for addition of synthetic polyester triangular fibre in cement concrete/ RCC/ Flooring /water retaining structures etc.,

Code 8732

Description

Details of Cost for : 1.00 units Unit Quantity

MATERIALS: Synthetic Polyester triangular fibre of length 12 mm, i/c kg labour for mixing.

Rate

0.125

365.00

Add water charges @ 1% on

Total: 45.63

Add C.P & OH @15% on 46.09 Cost for 1.00 units Rate per Units: Rate as per DSR-12:

Rs 53.00 Rs 53.00

Item Code: 4.19.1.1 Providing and laying in position RMC using flyash and cement manufactured in automated plant including pumping of RMC and admixtures - All work upto plinth level - M15 Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS:

DSR-12

Page 70 of 2298

0293 0295 2206 2202 0982 2203 1980 2262 0367 2209 7318

0004 0029 0009

0155 0114 0101 0012 9999

Stone Aggregate (Single size) : 40 mm nominal size (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) Stone Aggregate (Single size) : 20 mm nominal size Carraige of Stone aggregate 40 mm nominal size and above

cum

0.65

950.00

cum cum

0.24 0.65

1050.00 95.22

Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Fly ash Carraige of Fly ash Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries

cum cum cum cum cum tonne tonne kilog

0.24 0.37 0.37 0.21 0.21 0.24 0.24 1.20

87.60 1120.00 87.60 7.75 87.60 5000.00 77.87 36.50

cum km/ c cum

1.00 10.00 1.00

350.00 30.00 130.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49 Total: 4278.90

Add water charges @ 1% on

Add C.P & OH @15% on 4321.69 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4969.94 Rs 4969.95

Item Code: 4.19.1.2 Providing and laying in position RMC using flyash and cement manufactured in automated plant including pumping of RMC and admixtures - All work upto plinth level - M10 grade Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS: 0293 Stone Aggregate (Single size) : 40 mm nominal size cum 0.65 950.00 (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.24 1050.00 2206 Carraige of Stone aggregate 40 mm nominal size and above cum 0.65 95.22 2202 0982 2203 1980 2262 0367 2209 7318

0004 0029

DSR-12

Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Fly ash Carraige of Fly ash Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer.

cum cum cum cum cum tonne tonne kilog

0.24 0.37 0.37 0.21 0.21 0.22 0.22 1.10

87.60 1120.00 87.60 7.75 87.60 5000.00 77.87 36.50

cum km/ c

1.00 10.00

350.00 30.00

Page 71 of 2298

0009

0155 0114 0101 0012 9999

Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries

cum

1.00

130.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49 Total: 4173.69

Add water charges @ 1% on

Add C.P & OH @15% on 4215.43 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4847.74 Rs 4847.75

Item Code: 4.19.2.1 Providing and laying in position RMC using flyash and cement manufactured in automated plant including pumping of RMC and admixtures - All work above plinth level to floor V level- M15

Code 0293 0295 2206 2202 0982 2203 1980 2262 0367 2209 7318

0004 0029

0155 0114 0101 0012 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone Aggregate (Single size) : 40 mm nominal size (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) Stone Aggregate (Single size) : 20 mm nominal size Carraige of Stone aggregate 40 mm nominal size and above Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Fly ash Carraige of Fly ash Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries Extra labour for lifting of material upto floor five level = 0.75 x 2.5 = 1.88 Coolie

Rate

cum

0.65

950.00

cum cum

0.24 0.65

1050.00 95.22

cum cum cum cum cum tonne tonne kilog

0.24 0.37 0.37 0.21 0.21 0.24 0.24 1.20

87.60 1120.00 87.60 7.75 87.60 5000.00 77.87 36.50

cum km/ c

1.00 10.00

350.00 30.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49

Day

1.88

247.00 Total: 4613.26

Add water charges @ 1% on

Add C.P & OH @15% on 4659.39 Cost for 1.00 Cum Rate per One Cum:

DSR-12

Rs 5358.30

Page 72 of 2298

Rate as per DSR-12:

Rs 5358.30

Item Code: 4.19.2.2 Providing and laying in position RMC using flyash and cement manufactured in automated plant including pumping of RMC and admixtures - All work above plinth level to floor V level- M10

Code 0293 0295 2206 2202 0982 2203 1980 2262 0367 2209 7318

0004 0029

0155 0114 0101 0012 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone Aggregate (Single size) : 40 mm nominal size (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) Stone Aggregate (Single size) : 20 mm nominal size Carraige of Stone aggregate 40 mm nominal size and above Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Fly ash Carraige of Fly ash Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries Extra labour for lifting of material upto floor five level = 0.75 x 2.5 = 1.88 Coolie

Rate

cum

0.65

950.00

cum cum

0.24 0.65

1050.00 95.22

cum cum cum cum cum tonne tonne kilog

0.24 0.37 0.37 0.21 0.21 0.22 0.22 1.10

87.60 1120.00 87.60 7.75 87.60 5000.00 77.87 36.50

cum km/ c

1.00 10.00

350.00 30.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49

Day

1.88

247.00 Total: 4508.05

Add water charges @ 1% on

Add C.P & OH @15% on 4553.13 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5236.10 Rs 5236.10

Item Code: 4.20.1.1 Providing and laying in position RMC manufactured in automated plant including pumping of RMC and admixtures - All work upto plinth level - M15 Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS: 0293 Stone Aggregate (Single size) : 40 mm nominal size cum 0.65 950.00 (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.24 1050.00 2206 Carraige of Stone aggregate 40 mm nominal size and above cum 0.65 95.22 2202 0982

DSR-12

Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III)

cum cum

0.24 0.47

87.60 1120.00

Page 73 of 2298

2203 0367 2209 7318

0004 0029 0009

0155 0114 0101 0012 9999

Carraige of Coarse sand Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries

cum tonne tonne kilog

0.47 0.24 0.24 1.20

87.60 5000.00 77.87 36.50

cum km/ c cum

1.00 10.00 1.00

350.00 30.00 130.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49 Total: 4379.63

Add water charges @ 1% on

Add C.P & OH @15% on 4423.43 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5086.94 Rs 5086.95

Item Code: 4.20.1.2 Providing and laying in position RMC manufactured in automated plant including pumping of RMC and admixtures - All work upto plinth level - M10 PCC Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS: 0293 Stone Aggregate (Single size) : 40 mm nominal size cum 0.65 950.00 (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.24 1050.00 2206 Carraige of Stone aggregate 40 mm nominal size and above cum 0.65 95.22 2202 0982 2203 0367 2209 7318

0004 0029 0009

0155 0114 0101 0012 9999

Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries

cum cum cum tonne tonne kilog

0.24 0.47 0.47 0.22 0.22 1.10

87.60 1120.00 87.60 5000.00 77.87 36.50

cum km/ c cum

1.00 10.00 1.00

350.00 30.00 130.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49 Total: 4274.42

Add water charges @ 1% on

DSR-12

Page 74 of 2298

Add C.P & OH @15% on 4317.16 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4964.73 Rs 4964.75

Item Code: 4.20.2.1 Providing and laying in position RMC manufactured in automated plant including pumping of RMC and admixtures - All work above plinth level to floor V level- M15 PCC Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS: 0293 Stone Aggregate (Single size) : 40 mm nominal size cum 0.65 950.00 (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.24 1050.00 2206 Carraige of Stone aggregate 40 mm nominal size and above cum 0.65 95.22 2202 0982 2203 0367 2209 7318

0004 0029

0155 0114 0101 0012 9999

0115

Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries Extra labour for lifting of material upto floor five level = 0.75 x 2.5 = 1.88 Coolie

cum cum cum tonne tonne kilog

0.24 0.47 0.47 0.24 0.24 1.20

87.60 1120.00 87.60 5000.00 77.87 36.50

cum km/ c

1.00 10.00

350.00 30.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49

Day

1.88

247.00 Total: 4713.99

Add water charges @ 1% on

Add C.P & OH @15% on 4761.13 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5475.30 Rs 5475.30

Item Code: 4.20.2.2 Providing and laying in position RMC manufactured in automated plant including pumping of RMC and admixtures - All work above plinth level to floor V level- M10 PCC Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS: 0293 Stone Aggregate (Single size) : 40 mm nominal size cum 0.65 950.00 (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.24 1050.00 2206 Carraige of Stone aggregate 40 mm nominal size and above cum 0.65 95.22 2202

DSR-12

Carraige of Stone aggregate below 40 mm nominal size

cum

0.24

87.60

Page 75 of 2298

0982 2203 0367 2209 7318

0004 0029

0155 0114 0101 0012 9999

0115

Coarse sand (zone III) Carraige of Coarse sand Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries Extra labour for lifting of material upto floor five level = 0.75 x 2.5 = 1.88 Coolie

cum cum tonne tonne kilog

0.47 0.47 0.22 0.22 1.10

1120.00 87.60 5000.00 77.87 36.50

cum km/ c

1.00 10.00

350.00 30.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49

Day

1.88

247.00 Total: 4608.78

Add water charges @ 1% on

Add C.P & OH @15% on 4654.87 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5353.10 Rs 5353.10

Item Code: 5.1.1 P/L specified grade of RCC excluding centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1:2 -coarse sand - 20 mm stone aggregate) Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS: 0295 Stone aggregate 20mm cum 0.64 1050.00 0297 Stone aggregate 10mm cum 0.21 1050.00 2202 Carriage of aggregate 20mm and 10mm cum 0.85 87.60 0982 Coarse sand cum 0.425 1120.00 2203 Carriage of coarse sand cum 0.425 87.60 0367 Cement (0.425 cum) tonne 0.61 5000.00 2209 Carriage of cement tonne 0.61 77.87 LABOUR: 0155 Mason Day 0.17 287.00 0114 Beldar Day 2.00 247.00 0101 Bhishti Day 0.90 260.00 0002 Mixer Day 0.07 800.00 0012 Vibrator Day 0.07 300.00 9999 Sundries L.S. 14.30 1.49 Total: Add water charges @ 1% on 5452.79 Add C.P & OH @15% on 5507.32 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6333.42 Rs 6333.40

Item Code: 5.1.2

DSR-12

Page 76 of 2298

P/L specified grade of RCC excluding centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 -coarse sand - 20 mm stone aggregate) Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS : 0295 20mm stone aggregate cum 0.57 1050.00 0297 10mm stone aggregate cum 0.28 1050.00 2202 Carriage of aggregate cum 0.85 87.60 0982 Coarse sand cum 0.425 1120.00 2203 Carriage of coarse sand cum 0.425 87.60 0367 Cement (0.2833 cum) tonne 0.40 5000.00 2209 Carriage of cement tonne 0.40 77.87 LABOUR: 0155 Mason Day 0.17 287.00 0114 Beldar Day 2.00 247.00 0101 Bhishti Day 0.90 260.00 0002 Mixer Day 0.07 800.00 0012 Vibrator Day 0.07 300.00 9999 Sundries L.S. 14.30 1.49 Total: Add water charges @ 1% on 4386.44 Add C.P & OH @15% on 4430.30 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5094.85 Rs 5094.85

Item Code: 5.1.3 P/L specified grade of RCC excluding centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 -coarse sand - 20 mm stone aggregate) Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS: 0295 Stone aggregate 20mm cum 0.67 1050.00 0297 Stone aggregate 10mm cum 0.22 1050.00 2202 Carriage of aggregate cum 0.89 87.60 0982 Coarse sand cum 0.445 1120.00 2203 Carriage of coarse sand cum 0.445 87.60 0367 Cement (0.2225 cum) tonne 0.32 5000.00 2209 Carriage of cement tonne 0.32 77.87 LABOUR: 0155 Mason Day 0.17 287.00 0114 Beldar Day 2.00 247.00 0101 Bhishti Day 0.90 260.00 0002 Mixer Day 0.07 800.00 0012 Vibrator Day 0.07 300.00 9999 Sundries L.S. 14.30 1.49 Total: Add water charges @ 1% on 4049.86 Add C.P & OH @15% on 4090.36 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4703.91 Rs 4703.90

Item Code: 5.2.1

DSR-12

Page 77 of 2298

RCC work in walls, columns, pillars, piers, etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : - 1:1:2 -coarse sand - stone aggregate 20 mm)

Code 0295 0297 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0002 0012 9999 9999 0115

Details of Cost for : 9.18 Cum Unit Quantity

Description MATERIALS: Stone aggregate 20mm Stone aggregate 10mm Carraige of Stone aggregate below 40 mm nominal size Coarse sand Carraige of Coarse sand Cement Carraige of Cement LABOUR: Beldar Coolie Bhisthi Mason I class Mason II class Hire running charges of concrete mixer Vibrator (Hire charges) Sundries Scaffolding Extra labour for lifting of material upto floor five Coolie

Rate

cum cum cum cum cum tonne tonne

5.8752 1.9278 7.803 3.9015 3.9015 5.5998 5.5998

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day Day Day L.S. L.S.

11.29 7.53 8.26 0.92 0.92 0.64 0.64 131.82 420.03

247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49

Day

17.20

247.00 Total: 55122.07

Add water charges @ 1% on

Add C.P & OH @15% on 55673.29 Cost for 9.18 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6974.32 Rs 6974.30

Item Code: 5.2.2 RCC work in walls, columns, pillars, piers, etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : - 1:15:3 -coarse sand - stone aggregate 20 mm)

Code 0295 0297 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0002 0012 9999 9999

DSR-12

Description MATERIALS: Stone aggregate 20mm Stone aggregate 10mm Carraige of Stone aggregate below 40 mm nominal size Coarse sand Carraige of Coarse sand Cement Carraige of Cement LABOUR: Beldar Coolie Bhisthi Mason I class Mason II class Hire running charges of concrete mixer Vibrator (Hire charges) Sundries Scaffolding Extra labour for lifting of material upto floor five

Details of Cost for : 9.18 Cum Unit Quantity

Rate

cum cum cum cum cum tonne tonne

5.2326 2.5704 7.803 3.9015 3.9015 3.672 3.672

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day Day Day L.S. L.S.

11.29 7.53 8.26 0.92 0.92 0.64 0.64 131.82 420.03

247.00 247.00 260.00 301.00 273.00 800.00 300.00 1.49 1.49

Page 78 of 2298

0115

Coolie

Day

17.20

Add water charges @ 1% on

247.00 Total: 45332.95

Add C.P & OH @15% on 45786.28 Cost for 9.18 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5735.75 Rs 5735.75

Item Code: 5.2.3 RCC work in walls, columns, pillars, piers, etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : - 1:2:4 -coarse sand - stone aggregate 20 mm)

Code 0295 0297 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 9999 9999 0002 0012 0115

Details of Cost for : 9.18 Cum Unit Quantity

Description MATERIALS: Stone aggregate 20mm Stone aggregate 10mm Carraige of Stone aggregate below 40 mm nominal size Coarse sand Carraige of Coarse sand Cement Carraige of Cement LABOUR: Beldar Coolie Bhisthi Mason I class Mason II class Sundries Scaffolding Hire running charges of concrete mixer Vibrator (Hire charges) Extra labour for lifting of material upto floor five Coolie

Rate

cum cum cum cum cum tonne tonne

6.1506 2.0196 8.1702 4.0851 4.0851 2.9376 2.9376

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day L.S. L.S. Day Day

11.29 7.53 8.26 0.92 0.92 131.82 420.03 0.64 0.64

247.00 247.00 260.00 301.00 273.00 1.49 1.49 800.00 300.00

Day

17.20

247.00 Total: 42243.20

Add water charges @ 1% on

Add C.P & OH @15% on 42665.63 Cost for 9.18 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5344.82 Rs 5344.80

Item Code: 5.3 RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shuttering, finishing, C'sand-4 20mm metal Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS: 0295 Stone aggregate 20mm cum 0.67 0297 Stone aggregate 10mm cum 0.22 2202 Carriage of aggregate cum 0.89 0982 Coarse sand cum 0.445 2203 Carriage of coarse sand cum 0.445 0367 Cement (0.02225/ cum) tonne 0.32 2209 Carriage of cement tonne 0.32

DSR-12

reinforcement -1:2:4 -2

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

Page 79 of 2298

0155 0114 0101 0002 0012 9999 0115

LABOUR: Mason Beldar Bhishti Mixer Vibrator Sundries Extra labour for lifting material upto floor V level: Coolie (2.5x0.75)

Day Day Day Day Day L.S.

0.24 2.75 0.90 0.08 0.08 14.30

287.00 247.00 260.00 800.00 300.00 1.49

Day

1.88

247.00 Total: 4730.56

Add water charges @ 1% on

Add C.P & OH @15% on 4777.87 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5494.55 Rs 5495.55

Item Code: 5.4 P/L up to floor five level RCC in kerbs, steps etc excluding centering, shuttering, finishing, reinforcement with 1:2:4 - coarse sand -20 mm stone aggrgt) Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate 04.004.01 P/L C.C. in kerb at near ground level: 1 :2 :4 coarse sand, 20 1.00 4514.03 mm stone agg. LABOUR: Extra labour for laying CC in RCC work : 0114 (B) Beldar Day 0.10 247.00 0101 (B) Bhishti Day 0.20 260.00 0123 (B) Mason 1st class Day 0.04 301.00 0124 (B) Mason 2nd class Day 0.04 273.00 0128 (B) Mate Day 0.04 260.00 0115 (B) Extra labour for lifting material upto floor V level Coolie 2.5 x 0.75 = 1.88 Day 1.88 247.00 Total: Add water charges @ 1% except on [A] i.e on 574.42 Add C.P & OH @15% except on [A] i.e on 580.16 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5181.21 Rs 5181.25

Item Code: 5.5 RCC work in arches, archribs, domes, etc upto floor 5 level with 1 : 2 : 4 Code 0295 0297 2202 0982 2203 0367 2209 0155 0114

DSR-12

Description MATERIAL Stone aggregate 20mm Stone aggregate 10mm Carriage of aggregate Coarse sand Carriage of coarse sand Cement (0.02225/ cum) Carriage of cement LABOUR: Mason Beldar

Details of Cost for : 26.73 Cum Unit Quantity cum cum cum cum cum tonne tonne Day Day

Rate

17.9091 5.8806 23.7897 11.8948 11.8948 8.5536 8.5536

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

6.42 73.51

287.00 247.00

Page 80 of 2298

0101 0002 0012 9999 0123 0124 0101 0115 0115

Bhishti Mixer Vibrator Sundries Extra for laying CC over curved surfaces Mason 1st class Mason 2nd class Bhishti Coolie Extra labour for lifting material upto floor V level Coolie (1.50x0.75x26.73)

Day Day Day L.S.

24.06 2.14 2.14 401.89

260.00 800.00 300.00 1.49

Day Day Day Day

5.00 5.00 1.50 4.50

301.00 273.00 260.00 247.00

Day

50.12

247.00 Total: 130820.47

Add water charges @ 1% on

Add C.P & OH @15% on 132128.67 Cost for 26.73 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5684.55 Rs 5684.55

Item Code: 5.6 RCC work in chimneys, shafts, upto floor five level with 1: 2: 4. Code

05.002.03

0115

Description

Details of Cost for : 1.00 Cum Unit Quantity

MATERIALS : R.C.C. 1:2:4 in.chimneys & shafts RCC work in walls, columns, pillars, piers, etc. up to floor five level excluding cost of Extra labour involved for lifting materials : (B) Coolie Day

Rate

1.00

5344.82

0.26

247.00 Total: 64.22

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 64.86 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5419.41 Rs 5419.40

Item Code: 5.7 RCC work in well-steining with 1 : 2 : 4 Code

04.001.03

0115

Description

Details of Cost for : 1.00 Cum Unit Quantity

MATERIALS: R.C.C. 1:2:4 in well steining P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a LABOUR. Extra labour involved : (B) Coolie Day

Rate

1.00

4514.03

0.08

247.00 Total: 19.76

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 19.96 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 4536.98 Rs 4537.00

Page 81 of 2298

Item Code: 5.8 RCC work in vertical and horizontal fins up to floor five level excluding centering, shuttering, finishing and reinforcement with 1:1½:3 - coarse sand - stone aggregate 20mm Details of Cost for : 0.66 Cum Code Description Unit Quantity Rate MATERIALS: 0295 Stone aggregate 20mm cum 0.3762 1050.00 0297 Stone aggregate 10mm cum 0.1848 1050.00 2202 Carraige of Stone aggregate below 40 mm nominal size cum 0.561 87.60 0982 Coarse sand cum 0.2805 1120.00 2203 Carraige of Coarse sand cum 0.2805 87.60 0367 Cement tonne 0.264 5000.00 2209 Carraige of Cement tonne 0.264 77.87 LABOUR: 0114 Beldar Day 0.79 247.00 0115 Coolie Day 0.56 247.00 0101 Bhisthi Day 0.60 260.00 0123 Mason I class Day 0.06 301.00 0124 Mason II class Day 0.06 273.00 9999 Scaffoldings L.S. 30.16 1.49 9999 Sundries L.S. 9.49 1.49 0002 Hire running charges of concrete mixer Day 0.05 800.00 0012 Vibrator (Hire charges) Day 0.05 300.00 Extra for lifting materials upto floor five level 0115 Coolie Day 0.18 247.00 Extra for restricted working in fins 0123 0124 0114 0101

Mason I class Mason II class Beldar Bhisthi

Day Day Day Day

0.05 0.05 0.10 0.15

Add water charges @ 1% on

301.00 273.00 247.00 260.00 Total: 3092.31

Add C.P & OH @15% on 3123.23 Cost for 0.66 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5441.98 Rs 5442.00

Item Code: 5.9.1 Centering & shuttering including strutting, propping etc. - Foundations, footings, bases of columns, etc. for mass concrete.

Code

DSR-12

Details of Cost for : 10.80 Sqm Description Unit Quantity Assuming shuttering material will become unserviceable after use of 40 times Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost

Rate

7319

Wall form panel [Qty = 16 x (1+10%-25%) / 40 = 0.34]

each

0.34

1050.00

7326

Corner angle (1.5m long) [Qty = 4 x (100+10-25)% / 40 = 0.085]

each

0.085

300.00

Page 82 of 2298

7327

100mm channel shoulder 2.5m long [Qty = 8 x (100+10-25)% / 40 = 0.17

each

0.17

1160.00

7328

Bridge clip [Qty = 16 x (100+10-25)% / 40 =0.34

each

0.34

97.00

7329

Single clip [Qty = 8 x (100+10-25)% / 40 = 0.17

each

0.17

77.00

7330

MS tube 40mm 4x2.7m = 10.8m [Qty = 10.8 x (100+10-25)% / 40 = 0.2295

metre

0.2295

280.00

9999

Assembly nuts & bolts 1040x0.85/40 = 22.10 L.S.

22.10

1.49

9999

Carriage L.S.

78.00

1.49

0116 0114 9999

LABOUR: Fitter grade-I Beldar Shuttering oil

Day Day

0.75 1.50

301.00 247.00

9999

Sundries

L.S. L.S.

52.00 26.00

1.49 1.49 Total: 1551.65

Add water charges @ 1% on

Add C.P & OH @15% on 1567.17 Cost for 10.80 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 166.88 Rs 166.90

Item Code: 5.9.2 Centering & shuttering including strutting, propping etc. - Walls including attached pilasters, butteresses, plinth and string courses etc. Details of Cost for : 15.80 Sqm Code Description Unit Quantity Rate Assuming shuttering material will become unserviceable after use of 40 times Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost 7319

Wall form panel : 1250x500mm Qty = 24x0.85/40 = 0.51 100mm channel shoulder 2.5m long [Qty : 8x0.85/40 = 0.17] Bridge clip [Qty : 24x0.85/40 = 0.51] Single clip [ 2x3x2= 12 nos Qty : 12x0.85/40 = 0.255]

each

0.51

1050.00

each

0.17

1160.00

each

0.51

97.00

each

0.255

77.00

7330

MS tube 40mm [2x2x8m = 32m - Qty : 32x0.85/40 = 0.68]

metre

0.68

280.00

9999

Nut & Bolts Qty : 1300x0.85/40 = 27.62

9999

Carriage

27.62 78.00

1.49 1.49

7327 7328 7329

DSR-12

L.S. L.S.

Page 83 of 2298

0116 0114 9999

LABOUR: Fitter grade-I Beldar Shuttering oil

9999

Sundries

Day Day

3.50 6.00

301.00 247.00

L.S. L.S.

78.00 52.00

1.49 1.49 Total: 3878.78

Add water charges @ 1% on

Add C.P & OH @15% on 3917.57 Cost for 15.80 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 285.14 Rs 285.15

Item Code: 5.9.3 Centering & shuttering including strutting, propping etc. - Suspended floors, roofs, landings, balconies and access platform

Code

Details of Cost for : 13.50 Sqm Unit Quantity

Description

Rate

MATERIALS : Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost 1. Plates (size 0.75x0.60) Angle 40x40x5mm 2x0.75= 1.50 m 2x0.60= 1.20 m = 2.70 m @ 3.00 kg/m = 8.10 kg sheet 1.6 mm thick 0.75x0.60 = 0.45 sqm 0.45 sqm @ 12.55kg/sqm = 5.65kg Weight of one plate = 13.75kg Add for wastage @ 5% = 0.69 kg Total = 14.44kg Total weight of all plates = 5x6x14.44 = 433.20 kg. Qty taken for cost using once = 433.2x0.85/40 = 9.2055 kg. 10.001 7342 7343 9999 9999 0116 0114 9999 9999

Structural steel work in single section fixed with or without connecting plate including a 2. Adjustable span- ESOSI (2.35-3.40m) each Qty taken for cost using once = 5x0.85/40 = 0.1063 3. Adjustable telescopi prop 3m(2.02-3.75m) each Qty taken for cost using once = 6x0.85/40 = 0.1275 4. Assembly nut & bolts etc. L.S. Qty taken for cost using once = 1040x0.85/40 = 22.1 Carriage L.S. LABOUR: Fitter grade-I Day Beldar Day Shuttering oil L.S. Sundries, paper tape etc L.S.

9.2055

59.90

0.1063

1825.00

0.1275

1150.00

22.10

1.49

130.00

1.49

3.00 6.00 78.00 49.70

301.00 247.00 1.49 1.49 Total: 3142.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 3173.96 Cost for 13.50 Sqm Rate per One Sqm:

DSR-12

Rs 311.22

Page 84 of 2298

Rate as per DSR-12:

Rs 311.20

Item Code: 5.9.4 Centering & shuttering including strutting, propping etc. - Shelves (Cast in situ) Details of Cost for : 13.50 Sqm Code Description Unit Quantity MATERIALS: Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost 1. Plates (size 0.75 x 0.60) Angle 40x40x5mm 2x0.75= 1.50 m 2x0.60 = 1.20 m = 2.70 m @ 3.00 kg/m = 8.1 kg sheet 1.6 mm thick 0.75x0.60 = 0.45 sqm 0.45 sqm @ 12.55kg/sqm = 5.65kg Weight of one plate = 13.75kg Add for wastage @ 5% = 0.69 kg Total = 14.44kg Total weight of all plates = 5x6x14.44 = 433.20 kg. Qty taken for cost using once = 433.2x0.85/40 = 9.2055 kg. 10.001 Structural steel work in single section fixed with or without 9.2055 connecting plate including a 7342 2. Adjustable span- ESOSI (2.35-3.40m) each 0.1063 Qty taken for cost using once = 5x0.85/40 = 0.1063 “ 7343 3. Adjustable telescopi prop 3m(2.02-3.75m) each 0.1275 Qty taken for cost using once = 6x0.85/40 = 0.1275 9999 4. Assembly nut & bolts etc. L.S. 22.10 Qty taken for cost using once = 1040x0.85/40 = 22.1 9999 Carriage L.S. 130.00 LABOUR: 0116 Fitter grade-I Day 3.00 0114 Beldar Day 6.00 9999 Shuttering oil L.S. 78.00 9999 Sundries,paper tape etc L.S. 49.70 Add water charges @ 1% except on [A] i.e on

Rate

59.90 1825.00 1150.00 1.49 1.49 301.00 247.00 1.49 1.49 Total: 3142.53

Add C.P & OH @15% except on [A] i.e on 3173.96 Cost for 13.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 311.22 Rs 311.20

Item Code: 5.9.5 Centering & shuttering including strutting, propping etc. - Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Code

Description

Details of Cost for : 7.80 Sqm Unit Quantity

Rate

MATERIALS : Assuming shuttering will become unserviceable after use of 40 times Add maintenance charges @ 10% of cost of material Less salvage value of material after full use @ 25% of cost of material

DSR-12

Page 85 of 2298

1. Steel plates for side and bottom (plate size 1.20 x 0.50m) Angle 40x40x5mm 2x1.20 = 2.40 m ^ 3x0.50= 1.50 m Total 3.90 m @ 3.00 kg/m = 11.70 kg sheet 1.6 mm thick 1.20m x 0.50 m= 0.60 sqm. 0.60 sqm @ 12.55 kg/sqm. = 7.53 kg.”” Weight of one plate = 19.23 kg. -”” Add for wasdge 5% 0.96 kg. Total =20.19 Kg. Total weight of all plates 3x5x20.19 = 302.85 kg or 3.03 q’ Qty taken for cost of using once = 302.85 x 85/40 = 6.4356 kg. 10.001 7343 7344 9999 9999 0116 0114 9999 9999

Structural steel work in single section fixed with or without connecting plate including a (ii) Props 3m (adjustable telescopic 2.02 - 3.75m) Qty taken for cost of using once = 6x0.85/40 = 0.1275 m (iii) Beam clamp 300-380 mm(450-1070mm) Qty taken for cost of using once = 5/0.85/40 = 0.1063 m (iv) Assembly nut & bolts etc. Qty taken for cost of using once = 1040x0.85/40 = 22.10 Carriage LABOUR: Fitter Grade-I Beldar Shuttering oil Sundries, paper tape etc.

6.4356

59.90

each

0.1275

1150.00

each

0.1063

422.00

L.S.

22.10

1.49

L.S.

78.00

1.49

Day Day L.S. L.S.

1.25 2.50 39.00 24.39

301.00 247.00 1.49 1.49 Total: 1428.84

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1443.13 Cost for 7.80 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 262.19 Rs 262.25

Item Code: 5.9.6 Centering & shuttering including strutting, propping etc. - Columns, Pillars, Piers, Abutments, Posts and Struts.

Code

Description

Details of Cost for : 4.50 Sqm Unit Quantity

Rate

MATERIALS: Assuming shuttering will become unserviceable after use of 40 times Add maintenance charges @ 10% of cost of material Less salvage value of material after full use @ 25% of cost of material 7331 7332

7333

DSR-12

Wall form panel (Qty : for using once = 8x0.85/40 = 0.17) Corner angle 2.5m long (Qty : 4x0.85/40 = 0.085)

each

0.17

1040.00

each

0.085

340.00

Column clamp (450-1070 mm) (Qty : 5x0.85/40 = 0.1063)

each

0.1063

1220.00

Page 86 of 2298

7334

Prop 2m (2.0 - 3.50 m) (Qty : 4x0.85/40 = 0.085)

9999

Assembly nut & bolt Qty taken for cost of using once = 1300x0.85/40 = 27.62

9999

Carriage

0116 0114 9999

Fitter grade-I LABOUR: Beldar Shuttering oil

9999

Sundries

each

0.085

830.00

L.S.

27.62

1.49

L.S. Day

52.00 1.00

1.49 301.00

Day

2.00

247.00

L.S. L.S.

39.00 26.00

1.49 1.49 Total: 1416.42

Add water charges @ 1% on

Add C.P & OH @15% on 1430.58 Cost for 4.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 365.59 Rs 365.60

Item Code: 5.9.7 Centering & shuttering including strutting, propping etc. - Stairs, (excluding landings) except spiral-staircases.

Code

1198

1197

0302

2204

DSR-12

Description MATERIAL: (i) Cost of plank 38mm (2nd class kail wood) Waist 2.69x1.30 = 3.50sqm. Side shuttering of steps and side of waist-Steps = 8x1.30x1.15= 1.56 sqm. Face of landing 1x1.30x0.15 = 0.20 sqm. Side of waist 2.69x0.13 =0.35 sqm. Side of steps- 8x0.50x0.30x0.15 = 0.18sqm. Total = 5.79 sqm. Wastage 5% = 0.29sqm. Total = 6.08 sq. Cubical content6.08x0.038 = 0.231 cum = 231 dm3 Qty taken for cost using once = 231/8= 28.875 (ii) Batten 100mm x 75mm (2nd class kail wood in scantling) 4x1.30x0.100x0.075=0.039 cum = 39 dm3 Qty taken for cost using once = 39/8 = 4.875 (iii) Safeda Bailies 125mm dia. 2x4x0.80 = 6.40m Qty taken for cost using once = 6.4/8 = 0.8 m Carriage of timberPlanks = 0.231 cum. Battens = 0.039 cum. Bailies 6.4x3.142/4x(0.125) = 0.079cum. Total =0.349 cum. Qty taken for cost using once = 0.349/8 = 0.04363 cum

Details of Cost for : 5.79 Sqm Unit Quantity

Rate

cum

0.02888

25000.00

cum

0.00487

25000.00

0.80

37.00

0.04363

100.11

metre

cum

Page 87 of 2298

0112 0114 9999

LABOUR: For assembling, erection, dismantling and cleaning Carpenter 2nd class Beldar Sundries

Day Day L.S.

1.75 1.00 16.12

Add water charges @ 1% on

273.00 247.00 1.49 Total: 1626.49

Add C.P & OH @15% on 1642.75 Cost for 5.79 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 326.28 Rs 326.30

Item Code: 5.9.8 C/S i/c strutting, propping etc at all level Spiral staircases Code

05.009.05

05.009.02

05.009.07

Details of Cost for : 6.28 Sqm Description Unit Quantity Detail of cost for 6.28 sqm (For 10 steps) Treads Centering & shuttering including strutting, propping etc. 1.40 Lintels, beams, plinth beams, (Rate as per item no 5.9.5) Riser Centering & shuttering including strutting, propping etc. 3.22 Walls including attached pilas (Rate as per item no 5.9.2) Newal Post (Column) 10x3.14x0.232 = 1.66 sqm Centering & shuttering including strutting, propping etc. 1.66 Stairs, (excluding landings) e Add water charges @ 1% except on [A]+[B]+[C] i.e on

Rate

262.19

285.14

326.28 Total: 0.00

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 0.00 Cost for 6.28 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 290.90 Rs 290.90

Item Code: 5.9.9 C/S i/c strutting, propping etc at all level Arches, domes etc Code

DSR-12

Details of Cost for : 20.37 Sqm Description Unit Quantity Details of cost for a semicircular arch 3.6m clear span and 3.6m long. Area of centering = 22x1.8x3.6=20.37sqm. MATERIAL: Frame work in 2nd class kail wood Tie-1x3.6x0.15x0.20 = 0.108cum. Struts-3xl.8x0.10x0.10 =0.054cum Struts-2x2.55x0.10x0.10=0.051 cum. Ribs-4xl.38x.075x0.075=0.031cum. Total = 0.244 cum. Quantity for 7 such frames 7x0.244 =1.708cum. Strips 5cmx2.5cm = 7.5cm center to center 5.66/0.075x0.05x0.025x3.6 = 0.342cum.

Rate

Page 88 of 2298

1197

0302 0992

2204 2302 0112 0114 9999

Total = 2.050 cum = 2050 cudm Qty taken for cost using once = 2050/8 = 256.25 cudm Safeda Balli supports 12.5cm dia 7x4x3.6= 100.8m Qty taken for cost using once = 100.8/8 = 12.6 in G.I. Plain sheet 20.37 sqm = 116kg. Or 1.16 quintal Qty taken for cost using once =1.16/8 = 0.145 qtl CarriageKail wood = 2.05cum. Bailies- 100.8x(. 125) /4x3.142 = 1.24cum. Total = 3.29 cum.Qty taken for cost using once = 3.29/8 = 0.4112 cum G.I. Sheet = 0.116 t Qty taken for cost using once = 0.116/8 = 0.0145 t LABOUR: Carpenter Ilnd class Beldar Sundries

cum

0.25625

25000.00

metre

12.60

37.00

quint

0.145

4750.00

cum

0.4112

100.11

tonne

0.0145

77.87

16.00 13.00 11.70

273.00 247.00 1.49 Total: 15199.93

Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 15351.93 Cost for 20.37 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 866.70 Rs 866.70

Item Code: 5.9.10 C/S i/c strutting, propping etc at all level Extra for arches, domes etc exceeding 6 metre span Details of Cost for : 33.31 Sqm Code Description Unit Quantity Rate Details of cost per 33.31 sqm. Centering and shuttering for arches and carved surface exceeding 6m in span (an average of 8m) Radius R = 5m 2R-2=4+4 Arctan ( 4/3 ) = 53.28° 2x53.2° = 106° Surface area =2x22/7x5x3.6x106/360=33.3lsqm. Arc=9.25m MATERIAL: Tie-2x8xO. 18x0.05 =0.144cum Struts-2x2.5x0.1x0.1 =0.050cum. Struts-2xl .77x0.1 xO. 1 =0.035cum. Ribs-6x 1.54x0.23x0.1 =0.213cum. Struts-2x 1.72x0.1 xO. 1 =0.034cum. Total=0.476cum. For four such frames =0.476x4= 1.904 cum. laggings-75x3.6x0.125x0.075=2.531cum. Tie-2x3.6xO.225xO.O38=O.O62cum. Brace-3x2x2.14x0.225x0.038=0.110cum Brace-3x4x3.8x0.225x0.038=0.390 cum Sleepers-4x3.6x0.20x0.15=0.432 cum Sleepers-2x4x3.6xO. 175x0.075=0.378 Vertical post-4x4x-3.6x0.15x0.15=1.296 “ Total =7.103cum. or 7103 cudm 1197 Qty taken l/8th of qty for cost using once = cum 0.8879 25000.00 7.103/8 = cum = 887.9 Cudm

DSR-12

Page 89 of 2298

2204

1225

1034

2302

0112 0114 9999

05.009.09

Carriage of wood Fittings: 3 way straps 50mmxl 0mm = 32 Nos. 32 no. @0.50cm each = 16m Straps-50mmxl0mm = 8 Nos. @0.25cm each = 2m = 18m 18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q Qty taken l/8th of qty for cost using once = 0.702/8 = 0.08775 Bolts 160 Nos. 254 mm long 16mm dia.160x.254x 1.58=64.21 kg=0.64q. s Qty taken l/8th of qty for cost using once = 0.64/8 = 0.08 Carriage of steel = 0.1342t Qty taken l/8th of qty for cost using once = 0.1342/8 = 0.01677 cum LABOUR: Carpenter 2nd class Beldar Sundries Less Cost of shuttering etc. for an arch exceeding 6 m span i.e. for an average of 8 m span C/S i/c strutting, propping etc at all level Arches, domes etc

cum

0.8879

100.11

quint

0.0878

3950.00

quint

0.08

5400.00

tonne

0.0168

77.87

Day Day L.S.

28.00 24.00 134.55

273.00 247.00 1.49

-33.31

866.70

Add water charges @ 1% except on [A] i.e on

Total: 36838.99

Add C.P & OH @15% except on [A] i.e on 37207.38 Cost for 33.31 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 417.85 Rs 417.85

Item Code: 5.9.11 C/S i/c strutting, propping etc at all level Chimneys and shafts. Code

7319 7327 7328 7329 7330 9999

9999 0116 0114

DSR-12

Details of Cost for : 15.80 Sqm Description Unit Quantity Details for 7.9m long and 1.00m high wall Area of contact 2x7.9x1.0 = 15.8 sqm. MATERIALS : Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost Wall form Panel (1.25x0.5) 2x3x2x2 = 24 Nos. Qty taken for cost of using once = 24x0.85/40 = 0.51 100 mm channel shoulder 2.5m long, 4x2 = 8 Qty taken for cost of using once = 8x0.85/40= Bridge clip 2x6x2 = 24 Qty taken for cost of using once = 24x0.85/40 = 0.51 Single clip 2x3x2 = 12 Qty taken for cost of using once = 12x0.85/40 = 0.255 M.S. Tube 40mm 2x2x8m = 32m Qty taken for cost of using once = 32x0.85/40 = 0.68 Nut & Bolts Qty taken for cost of using once = 1300x0.85/40= 27.63 Carriage LABOUR: Fitter Grade-I Beldar

Rate

each

0.51

1050.00

each

0.17

1160.00

each

0.51

97.00

each

0.255

77.00

metre

0.68

280.00

L.S.

27.63

1.49

L.S.

78.00

1.49

Day Day

3.50 6.00

301.00 247.00

Page 90 of 2298

9999 9999

Shuttering oil Sundries

L.S. L.S.

78.00 52.00

Add water charges @ 1% on

1.49 1.49 Total: 3878.80

Add C.P & OH @15% on 3917.59 Cost for 15.80 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 285.14 Rs 285.15

Item Code: 5.9.12 C/S i/c strutting, propping etc at all level Well steining. Details of Cost for : 26.39 Sqm Code Description Unit Quantity 05.009.12-A Cost of centring and shuttering materials for using once in times 1.00 item 5.9.12 - well steining 05.009.12-A Cost of centring and shuttering materials for using once in times 0.16667 item 5.9.12 - well steining Add water charges @ 1% on

Rate 3995.63 3995.63 Total: 4661.58

Add C.P & OH @15% on 4708.20 Cost for 26.39 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 205.17 Rs 205.15

Item Code: 5.9.13 Centering & shuttering including strutting, propping etc. - Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. Details of Cost for : 23.90 Sqm (In DAR wrongly taken as 25.1) Code Description Unit Quantity Rate Details of cost for fins 4 vertical fins 4 metre high and at 1 metre centres, with two horizontal fins all projecting 60cm from face of wall and 5 cm thicki.e.4x4x1.215+2x3x0.65=23.90 sqm Materials : (i) Planks 2nd class kail wood 38mm thick4x4x1.25=20.00 23x0.65 =3.90 = 23.90 Wastage @ 5% = 1.20 = 25.10sqm. 25.10x0.038=.954 cum or 954 cudm 1198 Qty for cost using once = 954/8 = 119.25 cudm cum 0.11925 25000.00 (ii) Battens (2nd class kail wood)4x2x5x0.60x0.075x0.050=0.090 3x2x5x1.00x0.075x0.050=0.112 2x6x0.60x0.075x0.100=0.054 = 0.256 Cum. Wastage® 5% =0.013 cum = 0.269 cum= 269 cudm 1197 Qty for cost using once = 269/8 = 33.625 cudm cum 0.03363 25000.00 (iii) Safeda Bailies 125mm dia-

DSR-12

Page 91 of 2298

0302

2204

0112 0114 9999

2x2x6x4.00 =96m Wastage @5% = 4.8m = 100.8 m Qty for cost using once = 100.8/8 = 12.6 m (iv) Carriage timberPlanks = 0.954 Battens = 0.269 Bailies 100.8x(.125)^2 /4x3.142=1.238cum. = 2.461 cum Qty for cost using once = 2.461/8 = 0.3076 cum Labour: For assembling, erection, dismantling and cleaning Carpenter 2nd class Beldar Sundries

metre

12.60

37.00

cum

0.3076

100.11

Day Day L.S.

11.00 11.00 80.73

273.00 247.00 1.49 Total: 10159.28

Add water charges @ 1% on

Add C.P & OH @15% on 10260.87 Cost for 23.90 Sqm (In DAR2012 rongly taken as 25.1) Rate per One Sqm: Rs 493.72 Rate as per DSR-12: Rs 470.10

Item Code: 5.9.15 Centering and shuttering .. .. : Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks etc Details of Cost for : 10.80 Sqm Code Description Unit Quantity Rate Details of cost for footing size 2.7mx2.7mxl.00m Contact area = 10.8 sqm. Assuming shuttering material will become unserviceable after use of 40 times Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost 7319

7326 7327 7328 7329 7330

9999

9999 0116 0114

DSR-12

Wall form panel 1250x500 mm Qty taken for cost of using once = 16x0.85/40 = 0.34 Corner angle 45x45x5 mm 1.50 m long Qty taken for cost of using once = 4x0.85/40 = 0.085 100 mm channel shoulder 2.5 m long Qty taken for cost of using once = 8x0.85/40 = 0.17 Double clip ( bridge clip) Qty taken for cost of using once = 16x0.85/40 = 0.34 Single clip Qty taken for cost of using once = 8x0.85/40 = 0.17 M.S. tube 40 mm dia Qty taken for cost of using once = 10.8x0.85/40 =0.2295 Assembly nuts & bolts Qty taken for cost of using once = 1040x0.85/40 = 22.10 Carriage LABOUR: Fitter (grade 1) Beldar

each

0.34

1050.00

each

0.085

300.00

each

0.17

1160.00

each

0.34

97.00

each

0.17

77.00

0.2295

280.00

L.S.

22.10

1.49

L.S.

78.00

1.49

Day Day

0.75 1.50

301.00 247.00

metre

Page 92 of 2298

9999 9999

Shuttering oil Sundries

L.S. L.S.

52.00 26.00

Add water charges @ 1% on

1.49 1.49 Total: 1551.65

Add C.P & OH @15% on 1567.17 Cost for 10.80 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 166.88 Rs 166.90

Item Code: 5.9.16.1 Centering & shuttering including strutting, propping etc. - Edges of slabs - under 20cm wide Details of Cost for : 12.00 m Code Description Unit Quantity Assuming that the timber will become unserviceable after being used 8 times. (i) Planks 30mm thick (2nd class Kail wood or equivalent local soft wood) 4x3x0.15x0.030=0.054cum 1198 Wastage @5% = 0.003 cum. cum 0.00712 Total = 0.057 cum 57 cudm Qty taken for cost of using once = 57/8 = 7.125 cudm (ii) Battens 75mmxl00mm (2nd class Kail wood) Horizontal 2x4x0.075x0.1x0.5=0.030 Horizontal 2x4x0.075x0.1 x 1.5=0.090 (iii) Vertical battens 16x0.15x0.075x0.030M=O.0054 (iv) Struts 16x0.25x0.075x0.075=0.0225 Total = 0.1479\"’ Wastage @5% =0.0074 Total = 0.1553 cum’= 155 cudm 1197 Qty taken for cost ef using once = 155/8 = cum 0.01938 19.375 cudm Carriage of timber Planks = 0.057 cum. Battens = 0.155 cum. Total = 0.212 cum. 2204 Qty taken for cost of using once = 0.212/8 = 0.0265 cum cum 0.0265 LABOUR: For assembling erection dismantling & cleaning. 0112 Carpenter Ilnd class Day 0.81 0114 Mazdoor (Male) Day 0.54 9999 Sundries L.S. 5.20 Add water charges @ 1% on

Rate

25000.00

25000.00

100.11

273.00 247.00 1.49 Total: 1027.41

Add C.P & OH @15% on 1037.68 Cost for 12.00 m Rate per One Metre: Rate as per DSR-12:

Rs 99.44 Rs 99.45

Item Code: 5.9.16.2 C/S i/c strutting, propping etc at all level Edges of slabs and breaks in floors and walls Above 20 cm wide Details of Cost for : 4.00 Sqm

DSR-12

Page 93 of 2298

Code

1198

1197

2204

0112 0114 9999

Description Consider a 4mx4xslab 25cms thick 16 metre edge length MATERIALS : (i) Planks 38mm thick 4x4x0.25x0.038 = 0.152 Wastage @ 5% = 0.008 Total = 0.160 cum. = 160 cudm Qty taken for cost of using once = 160/8 = 20 cudm (ii) Battens 6x2x0.6 x0.075x0.100=0.054 5x2x1.5x0.075x0.100=0.113 Total =0.167 Wastage @ 5% = 0.008 Total =0.175 cum. = 175 cudm Qty taken for cost of using once = 175/8 = 21.88 cudm Carriage of timber Planks = 0.16 cum. Battens = 0.175 cum. Total = 0.335 cum. Qty taken for cost of using once = 0.335/8 = 0.0419 cum LABOURFor assembling erection dismantling & cleaning. Carpenter Ilnd class Mazdoor (Male) Sundries

Unit

Quantity

Rate

cum

0.02

25000.00

cum

0.02188

25000.00

cum

0.0419

100.11

Day Day L.S.

1.00 0.75 6.50

273.00 247.00 1.49 Total: 1519.13

Add water charges @ 1% on

Add C.P & OH @15% on 1534.32 Cost for 4.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 441.12 Rs 441.10

Item Code: 5.9.17 C/S i/c strutting, propping etc at all level Cornices and mouldings Code

1198

1197

DSR-12

Details of Cost for : 4.00 Sqm Description Unit Quantity Details of cost for 10m long moulding 10cm projection, 20cm depth and 40cm girth Area in contact 10x0.40 = 4.00 sqm. Assuming that the timber will become unserviceable after being used 8 times. (I) Planking 30mm thick = 4sqm. Extra & Wastage 20% = 0.8 sqm. Total = 4.8 sqm. 4.8x0.038 = 0.182 cum = 182 cudm’ Qty taken for cost using once = 182/8 = 22.75 cum (ii) Battens-Joining to Planking 1x10x0.1x0.075 = 0.075 cum. From bottom shuttering 10xl.5x0.lx0.075 = 0.113 cum. Wales 10x0.4mx0.1x0.075 = 0.030 cum. Total = 0.218 cum = 218 cudm Qty taken for cost using once = 218/8 = 27.25 cum cudm

Rate

0.02275

25000.00

0.02725

25000.00

Page 94 of 2298

2447

2204 0112 0114 9999

(iii) Bailies 125 mm dia. Slant 10x0.3 =3.00 m ver. 6x3.5 = 21.00m Total = 24.00 m Wastage @ 5% = 1.20 m Total = 25.20 m Qty taken for cost using once = 25.2/8 = 3.15M Carriage: Planking = 0.188 cum. Battens & Wales = 0.218 cum. Bailies 25.2x22/7x(0.125)² /4 = 0.310 cum. Total = 0.710 cum. Qty taken for cost using once = 0.71/8= 0.0888 cum Labour for assembling, erection, dismantling & cleaning Carpenter Ilnd class Mazdoor (Male) Sundries

metre

3.15

35.00

cum

0.0888

100.11

Day Day L.S.

0.63 0.63 6.50

273.00 247.00 1.49 Total: 1706.43

Add water charges @ 1% on

Add C.P & OH @15% on 1723.49 Cost for 4.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 495.50 Rs 495.50

Item Code: 5.9.18 C/S i/c strutting, propping etc at all level Small surfaces such as canti- lever ends, brackets etc Details of Cost for : 2.525 Sqm Code Description Unit Quantity Rate Details of cost for a bracket 1.20m projected Front area 0.50x0.60m End area 0.50x0.75m Area in contact with concrete 2x,(0.60+0.75)²/2x1.2-= 1.62 Sqm Front 0.5x0.6 = 0.30 sqm. Bottom 0.5x1.21 = 0.605 sqm. Total = 2.525 sqm. MATERIALS: Assuming that the timber will become unserviceable after being used 8 times. Timber Ilnd class kail wood or equivalent local soft wood (I) Plank 30mm thick. Sides 2{(0.60\"0.75)/2xl.238} = 1.6713 sqm Battens 0.576x1.21 =0.697 Front 0.5x0.638 =0.319 Total = 2.687 sqm. Cubical contents 2.687x0.038 =0.102 cum. Wastage @ 5% = 0.005 cum. Total =0.107 cum. 1198 Qty taken for cost using once = 107/8 = cum 0.01338 25000.00 (ii) Battens-0.05x0.05 2x1.238 = 2.476m 2x1.21 = 2.42m 2x0.688 = 1.376m

DSR-12

Page 95 of 2298

1197

2447

2204 0112 0114 9999

2x0.838 = 1.676m 3x0.5 = 1.50m Total = 9.448m Cubical contents 9.448x0.05x0.05 = 0.024 cum Wastage 5% = 0.0012 cum. Total = 0.0252 cum = 25.2 cudm Qty taken for cost using once = 25.2/8 = 3.15 cudm (iii) Bailies 125mm dia. 1x2.5 = 2.50m 1x2.65 = 2.65m Total = 5.15 m Wastage 5% = 0.26m Total =5.41 m Qty taken for cost using once = 5.41/8= 0.6763 m Carriage: Planks =0.107 cum. Battens = 0.0252 cum Bailies 5.41x22/7x(0.125) /4 = 0.066 cum Total = 0.198 cum Qty taken for cost using once = 0.198/8 Labour for assembling, erection, dismantling & cleaning Carpenter Ilnd class Mazdoor (Male) Sundries

cum

0.00315

25000.00

metre

0.6763

35.00

cum

0.0248

100.11

Day Day L.S.

0.80 0.80 7.15

273.00 247.00 1.49 Total: 866.05

Add water charges @ 1% on

Add C.P & OH @15% on 874.71 Cost for 2.525 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 398.38 Rs 398.35

Item Code: 5.9.19 Centering & shuttering including strutting, propping etc. - Weather shade, Chajjas, corbels etc., including edges.

Code

1198

DSR-12

Description

Details of Cost for : 0.954 Sqm Unit Quantity

MATERIALS : Assuming that the timber will become unserviceable after being used 8 times. Ilnd class kail wood (i) Planking 38mm thick. Bottom 1x1.876x0.488 = 0.915 sqm. 1x1.876x0.05 =0.94 sqm. 2x0.45x0.06 = 0.027 sqm. Total =1.036 sqm. Add 5% wastage = 0.052 sqm. Total = 1.088 sqm. Cubic contains 1.088x0.038 =0.041 cum = 41 cudm Qty taken for cost using once = 41/8 = 5.125 cum (ii) Battens2x0.60x0.075x0.10 = 0.009 Ends with bearing center 1x0.45x0.075x0.10 = 0.003 Total = 0.012 cum = 12 cudm

0.005125

Rate

25000.00

Page 96 of 2298

1197

2447

2204 0112 0114 9999

Qty taken for cost using once =12/8=1.50 (iii) Bailies 125mm dia. 2x2.1 =4.2m Wastage 5% = 0.21m Total = 4.41 m Qty taken for cost using once = 4.41/8 = 0.5513 m Carriage: Plank = 0.041 cum. Battens = 0.012 cum. Bailies 4.41x22/7x(0.125)² /4 = 0.054 cum. Total = 0.107 cum Qty taken for cost using once = 0.107/8 = 0.01338 cum Labour for assembling, erection, dismantling & cleaning Carpenter II class Mazdoor (Male) Sundries

cum

0.0015

25000.00

metre

0.5513

35.00

cum

0.01338

100.11

Day Day L.S.

0.30 0.25 5.20

273.00 247.00 1.49 Total: 337.67

Add water charges @ 1% on

Add C.P & OH @15% on 341.05 Cost for 0.954 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 411.12 Rs 411.10

Item Code: 5.9.20 C/S i/c strutting, propping etc at all level suspended floors etc with 12 mm water proof ply Details of Cost for : 13.50 Sqm Code Description Unit Quantity MATERIALS: Adding for maintenance @ 10% of cost Taking salvage value after full use of material @ 25% of cost

10.001 8659

7342 7343 9999 9999 0116

DSR-12

1. Plates (size 0.75x0.60) Angle 40x40x5mm 2x0.75= 1.50 m 2x0.60= 1.20 m = [email protected]/m = 8.I kg Weight of one plate =8.1 Okg Add for wastage @ 5% = 0.41 kg Total = 8.51kg Total weight of all plates = 5x6x8.51 = 255.30 kg Qty taken for cost using once.= 255.30x0.85/8 = 27.13kg Structural steel work in single section fixed with or without connecting plate including a Water proof ply 12mm thick. sqm 1x4.50x3.00=13.50sqm Add wastage 5% =0.68sqm Total 14.18sqm Qty taken for cost using once 14.18/8 = 1.77sqm 2. Adjustable span- ESOSI (2.35-3.40m) each Qty taken for cost using once = 5x0.85/40 = 0.531 3. Adjustable telescope prop 3m(2.02-3.75m) each Qty taken for cost using once = 6xO.85/40 0.6375 4. Assembly nut & bolts etc. L.S. Carriage L.S. LABOUR: Fitter grade-I Day

Rate

27.13

59.90

1.77

645.00

0.1063

1825.00

0.1275

1150.00

12.63 130.00

1.49 1.49

3.00

301.00

Page 97 of 2298

0114 9999 9999

Beldar Shuttering oil Sundries

Day L.S. L.S.

6.00 78.00 52.00

Add water charges @ 1% except on [A] i.e on

247.00 1.49 1.49 Total: 4273.50

Add C.P & OH @15% except on [A] i.e on 4316.24 Cost for 13.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 488.06 Rs 488.05

Item Code: 5.9.21 C/S i/c strutting, propping etc at all level lintel, beams etc with 12 mm water proof ply Details of Cost for : 7.80 Sqm Code Description Unit Quantity MATERIALS: Assuming shuttering will become unserviceable after use of 8 times Add maintenance charges @ 10% of cost of material Less salvage value of material after full use @ 25% of cost of material 1. Steel plates for side and bottom (plate size 1.20 x 0.50m) Angle 40x40x5mm 2x1.20 = 2.40 m 3x0.50= 1.50 m 3.90 m @ 3.00 kg/m = 11.70 kg Weight of one plate = 11.70 kg. Add for wastage = 0.585kg. Total =12.285 kg. Total weight of all plates 3x5x12.285 = 184.275 kg Qty taken for cost of using once = 184.275*x0.85/8 =19.58 kg 10.001 8659

7343 7344

9999 9999 0116 0114 9999 9999

Structural steel work in single section fixed with or without Kg connecting plate including a Water proof ply 12mm thick, 1x1.30x6.00 = 7.80 sqm Add 5% wastage 0.39 sqm Total 8.19 sq sqm (ii) Adjustable telescopic prop 3 m (2.02-3.75 m) Qty taken for cost of using once =6x0 each (iii) Beam clamp 300-380 mm(450-1070mm) Qty taken for cost of using once = 5x0.85/40 = each (iv) Assembly nut & bolts etc. L.S. Carriage L.S. LABOUR : Fitter (grade 1) Day Beldar Day Shuttering oil L.S. Sundries, paper tape etc. L.S.

19.58

59.90

1.02

645.00

0.1275

1150.00

0.1063

422.00

11.05 78.00

1.49 1.49

1.25 2.50

301.00 247.00

39.00

1.49

26.00

1.49 Total: 2072.67

Add water charges @ 1% except on [A] i.e on

DSR-12

Rate

Page 98 of 2298

Add C.P & OH @15% except on [A] i.e on 2093.40 Cost for 7.80 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 459.01 Rs 459.00

Item Code: 5.10.1 P/F tie bolt, spring, plastic cone in wall shuttering. 12 mm dia & 100 mm length. Details of Cost for : 24.00 sets Code Description Unit Quantity Details of cost for wall length 7.90mxlm (24 set) MATERIAL: 7320 Tie bolt 12mm dia & 100 mm length each 24.00 7324 Spring Coil 12mm dia. each 48.00 7325 Plastic cone 12mm dia. each 48.00 9999 Carriage: L.S. 13.00 LABOUR : 9999 Sundries L.S. 26.00 Add water charges @ 1% on

Rate

38.00 16.00 18.00 1.49 1.49 Total: 2602.11

Add C.P & OH @15% on 2628.13 Cost for 24.00 sets Rate per Each Set: Rate as per DSR-12:

Rs 125.93 Rs 125.95

Item Code: 5.10.2 P/F tie bolt, spring, plastic cone in wall shuttering. 12 mm dia & 150 mm length Details of Cost for : 24.00 sets Code Description Unit Quantity Details of cost for wall length 7.90mxlm (24 set) Material: 7321 Tie bolt 12 mm dia 150 mm length each 24.00 7324 spring coil 12 mm dia each 48.00 7325 Plastic cone 12mm dia. each 48.00 9999 Carriage: L.S. 13.00 Labour: 9999 Sundries L.S. 26.00 Add water charges @ 1% on

Rate

50.00 16.00 18.00 1.49 1.49 Total: 2890.11

Add C.P & OH @15% on 2919.01 Cost for 24.00 sets Rate per Each Set: Rate as per DSR-12:

Rs 139.87 Rs 139.85

Item Code: 5.10.3 P/F tie bolt, spring, plastic cone in wall shuttering. 20 mm dia & 150 mm length. Details of Cost for : 24.00 sets Code Description Unit Quantity Details of cost for wall length 7.90mxlm (24 set) MATERIAL: 7322 Tie bolt 20mm ida & 150mm length each 24.00

DSR-12

Rate

62.00

Page 99 of 2298

7324 7325 9999 9999

Spring coil 12 mm dia Plastic cone 12 mm dia Carriage: LABOUR: Sundries

each each L.S.

48.00 48.00 13.00

16.00 18.00 1.49

L.S.

26.00

1.49 Total: 3178.11

Add water charges @ 1% on

Add C.P & OH @15% on 3209.89 Cost for 24.00 sets Rate per Each Set: Rate as per DSR-12:

Rs 153.81 Rs 153.80

Item Code: 5.10.4 P/F tie bolt, spring, plastic cone in wall shuttering. 20 mm dia & 225 mm length. Details of Cost for : 24.00 sets Code Description Unit Quantity Details of cost for wall length 7.90mxlm (24 set) MATERIAL: 7323 Tie bott.20mm dia & 225mm length each 24.00 7324 Spring coil 12 mm dia each 48.00 7325 Plastic cone 12mm dia. each 48.00 9999 Carriage: L.S. 13.00 9999 Sundries L.S. 26.00 Add water charges @ 1% on

Rate

80.00 16.00 18.00 1.49 1.49 Total: 3610.11

Add C.P & OH @15% on 3646.21 Cost for 24.00 sets Rate per Each Set: Rate as per DSR-12:

Rs 174.71 Rs 174.70

Item Code: 5.11.1 Extra for additional height in centering, shuttering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof - Suspended floors, roofs, landing, beams ..

Code

7345 7343

Details of Cost for : 28.80 Sqm Description Unit Quantity Assuming that shuttering material will become unserviceable after use 40 times Less salvage value of material after full use @ 25% of cost material Add 10% of cost of material for maintenance 1. Prop 4m Prop 4m each 0.4463 Qty taken for cost using once = 21 x0.85/40 =0.4463 Adjustable telescopic prop 3m (2.02 - 3.75m) each -0.4463 Qty taken for cost using once = 21x0.85/40 =0.4463 (Difference of rate between 4m prop and 3m)

Rate

1170.00 1150.00

Bracing MS tube 40mm 7x4.8m = 33.60m 3x6.0m= 18.00m Total = 51.60m

DSR-12

Page 100 of 2298

7330

MS tube 40mm (Qty taken for cost using once = 51.6x0.85/40=1.0965)

metre

1.0965

280.00

7346

Double coupler Qty taken for cost using once = 21 x0.85/40 =0.4463 Carriage LABOUR: Fitter grade-I Beldar Sundries

each

0.4463

55.00

L.S.

65.00

1.49

Day Day L.S.

3.00 6.00 130.00

301.00 247.00 1.49 Total: 3016.04

9999 0116 0114 9999

Add water charges @ 1% on

Add C.P & OH @15% on 3046.20 Cost for 28.80 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 121.64 Rs 121.65

Item Code: 5.12 Providing, hoisting and fixing upto floor 5 level precast RCC work in string courses, bands etc with 1:2:4 Details of Cost for : 1.00 Cum Code Description Unit Quantity 04.005.02 P/F upto floor five level pre- cast C.C. string or lacing courses, 1.00 copings, bed plates, an (A) (Rate as per item no 4.5.2) (NB : Rate has been taken including cost of fixing in CM 1:2 as precast members are to be fixed in CM 1:2)(1 cement: 2 coarse sand) as per CPWD specifications LABOUR: Extra labour for laying CC in RCC work 0114 Beldar Day 0.10 0101 Bhishti Day 0.20 0123 Mason 1st class Day 0.04 0124 Mason 2nd class Day 0.04 0128 Mate Day 0.04 Add water charges @ 1% except on [A] i.e on

Rate 5134.29

247.00 260.00 301.00 273.00 260.00 Total: 110.06

Add C.P & OH @15% except on [A] i.e on 111.16 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5262.12 Rs 5265.20

Item Code: 5.13 P/H/F up to floor 5 level precast RCC in small lintels including centering, shuttering, finishing excluding reinforcement with 1:2:4 coarse sand - stone aggregate 20mm. Details of Cost for : 0.54 Cum Code Description Unit Quantity Rate 04.002.03 P/L CC walls string courses, coping, bed blocks, window sills Cum 0.54 5272.38 ,etc. up to floor five level 04.003.01 C/S i/c strutting for Foundation, footing etc Sqm 6.00 166.88 LABOUR : 0114 Beldar Day 0.05 247.00 0101 Bhisthi Day 0.10 260.00 0123 Mason I class Day 0.02 301.00 0124 Mason II class Day 0.02 273.00

DSR-12

Page 101 of 2298

0128

Mate

Day

0.02

Add water charges @ 1% except on [A]+[B] i.e on

260.00 Total: 55.03

Add C.P & OH @15% except on [A]+[B] i.e on 55.58 Cost for 0.54 Cum Rate per One Cum: Rate as per DSR-12:

Rs 7244.98 Rs 8720.30

Item Code: 5.14 Providing, hoisting and fixing upto floor 5 level precast RCC in mouldings with 1:2:4. Details of Cost for : 0.03 Cum Code Description Unit Quantity Cement concrete 1:2:4 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum 0.03 Coarse sand, 20mmstone a Extra labour for lifing 0.45x0.03x2.5 = 0.034 0115 Coolie Day 0.034 9999 Mortar and labour for hoisting and for fixing L.S. 2.73 04.003.01 C/S i/c strutting for Foundation, footing etc 0.36 9999 Add for extra labour for hoisting (53.82x0.03) L.S. 1.61 LABOUR : Add Extra labour for moulding : 0123 Mason (brick layer) 1st class Day 0.0174 0124 Mason 2nd class (0.58x0.03) Day 0.0174 0115 Coolie 1.5x0.03 Day 0.045 0101 Bhishti 0.06x0.03 Day 0.0018 Extra labour for laying CC in RCC 0114 Beldar 0.1x0.03 Day 0.003 0101 Bhishti 0.2x0.03 Day 0.006 0123 Mason 1st class 0.04x0.03 Day 0.0012 0124 Mason 2nd class 0.04x0.03 Day 0.0012 0128 Mate 0.04x0.03 Day 0.0012 Add water charges @ 1% except on [A]+[B] i.e on

Rate 4514.03

247.00 1.49 166.88 1.49

301.00 273.00 247.00 260.00 247.00 260.00 301.00 273.00 260.00 Total: 39.75

Add C.P & OH @15% except on [A]+[B] i.e on 40.15 Cost for 0.03 Cum Rate per One Cum: Rate as per DSR-12:

Rs 8055.67 Rs 8089.00

Item Code: 5.15 Providing, hoisting and fixing upto floor 5 level precast RCC in lintels etc with 1:2:4 Details of Cost for : 0.99 Cum Code Description Unit Quantity Details of cost for beam 6.60m long 0.50m deep and 0.30m wide = 6.60x0.50x0.30 = 0.99 cum. MATERIALS: 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum 0.99 Coarse sand, 20mmstone a 04.003.01 C/S i/c strutting for Foundation, footing etc 6.90 Extra labour for lifting material upto floor V level 0115 Coolie Day 1.11 LABOUR Extra labour for layin cement concrete in RCC work

DSR-12

Rate

4514.03 166.88 247.00

Page 102 of 2298

0114 0101 0123 0124 0128 9999 9999

Beldar Bhishti 0.20x0.99 Mason 1st class 0.04x0.99 Mason 2nd class 0.04x0.99 Mate 0.04x0.99 Cement mortar 1:3 for fixing Labour for hoisting, Transporting and setting in position

Day Day Day Day Day L.S. L.S.

0.099 0.198 0.0396 0.0396 0.0396 89.70 269.10

Add water charges @ 1% except on [A]+[B] i.e on

247.00 260.00 301.00 273.00 260.00 1.49 1.49 Total: 917.74

Add C.P & OH @15% except on [A]+[B] i.e on 926.92 Cost for 0.99 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6753.86 Rs 6754.00

Item Code: 5.16 P/H/F up to floor 5 level precast RCC in SHELVES including centering, shuttering, finishing excluding reinforcement with 1:2:4 coarse sand - stone aggregate 12.5mm. Qtys multiplied by 100 for better accuracy Details of Cost for : 1.62 Cum Code Description Unit Quantity Rate 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum 1.62 4514.03 Coarse sand, 20mmstone a Finishing : 13.018

Neat cement punning (A) Centring and shuttering:100x 2x(0.90+0.45)x0.04 = 10.8sqm

Sqm

85.00

31.12

04.003.01

C/S i/c strutting for Foundation, footing etc Extra labour for lifting material upto floor V level

Sqm

10.80

166.88

0115

Coolie Day Extra labour for laying cement concrete in RCC work due to delay etc.

1.80

247.00

0114 0101 0123 0124 0128 9999

Beldar Bhisthi Mason I class Mason II class Mate Cement mortar 1:3 for fixing

Day Day Day Day Day

1.60 0.32 0.06 0.06 0.06

247.00 260.00 301.00 273.00 260.00

9999

Labour for hoisting, Transporting and setting

L.S. L.S.

442.00 1352.00

1.49 1.49 Total: 3646.10

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 3682.56 Cost for 1.62 Cum Rate per One Cum: Rate as per DSR-12:

Rs 9873.56 Rs 9872.85

Item Code: 5.17 Providing, hoisting and fixing upto floor 5 level precast RCC in vertical and horizontal fins with 1:2:4 Details of Cost for : 0.66 Cum Code Description Unit Quantity

DSR-12

Rate

Page 103 of 2298

Details of cost for 4 RCC vertical fins 4m high at lm centre to centre with two horizontal fins, all projecting 60cm from face of wall and 5cm thick cubical contents = 0.66 cum.

0114 0101 0123 0124 0128 9999 9999

MATERIAL: P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a C/S i/c strutting for Foundation, footing etc (Rate same as per item no. 4.3.1) Extra labour for lifting material upto floor V level (B) Coolie LABOUR Extra labour for laying cement concrete in RCC work due to delay etc. (B) Beldar (B) Bhishti (B) Mason 1st class (B) Mason 2nd class (B) Mate (B) Cement mortar 1:2 for fixing (B) Labour for hoisting, Transporting and setting in position

9999

(B) Sundries

04.001.03 04.003.01

0115

0.66

4514.03

2.56

166.88

Day

0.75

247.00

Day Day Day Day Day L.S. L.S.

0.066 0.132 0.0264 0.0264 0.0264 17.94 71.76

247.00 260.00 301.00 273.00 260.00 1.49 1.49

L.S.

17.94

1.49 Total: 418.27

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 422.45 Cost for 0.66 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5897.41 Rs 5897.50

Item Code: 5.18.1 Providing precast CC jali 1:2:4 50 mm thick. Code

0768 9999 9999 0123 0124 0114

Description Details of cost for jali 2.00mx0.75m = 1.50 sqm. of jali Cost of jali Mortar for fixing Carriage and sundries Labour (for fixing): Mason 1st class Mason 2nd class Beldar

Details of Cost for : 1.50 Sqm Unit Quantity

Rate

sqm L.S. L.S.

1.50 6.24 6.20

210.00 1.49 1.49

Day Day Day

0.30 0.30 1.08

301.00 273.00 247.00 Total: 772.50

Add water charges @ 1% on

Add C.P & OH @15% on 780.23 Cost for 1.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 598.17 Rs 598.15

Item Code: 5.18.2 Providing precast CC jali 1:2:4 40 mm thick. Code

DSR-12

Description

Details of Cost for : 0.75 Sqm Unit Quantity

Rate

Page 104 of 2298

0769 9999 9999 0123 0124 0114

Details of cost for 1.2mx0.60m = 0.75 sqm. of jali. Cost of jali Mortar for fixing Carriage and sundries Labour (for fixing): Mason 1st class Mason 2nd class Beldar

sqm L.S. L.S.

0.75 3.64 3.64

180.00 1.49 1.49

Day Day Day

0.12 0.12 0.50

301.00 273.00 247.00 Total: 338.22

Add water charges @ 1% on

Add C.P & OH @15% on 341.60 Cost for 0.75 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 523.79 Rs 523.80

Item Code: 5.18.3 Providing precast CC jali 1:2:4 25 mm thick. Code 0770 9999 9999 0123 0124 0114

Details of Cost for : 0.375 Sqm Unit Quantity

Description Details of cost for jali 0.75mx0.5m = 0.375 sqm Cost of jali Mortar for fixing Carriage and sundries Labour (for fixing): Mason lstclass Mason 2nd class Beldar

Rate

sqm L.S. L.S.

0.375 1.82 1.82

145.00 1.49 1.49

Day Day Day

0.06 0.06 0.25

301.00 273.00 247.00 Total: 155.99

Add water charges @ 1% on

Add C.P & OH @15% on 157.55 Cost for 0.375 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 483.15 Rs 483.15

Item Code: 5.19 Encasing rolled steel sections in beams and columns, with CC 1:2:4 Code

04.001.03

0114 0101 0123 0124

DSR-12

Description Details of cost for 0.424 cum. Consider 2 R.S. Joist (150mmx80mm) 4.88m long placed 30cm apart centre to centre Overall dimensions of the beam 43cmx20cmMATERIAL: Concrete work4.93x0.43x0.20 = 0.424 cum For 1:2:4 Cement Concrete (1 cement: 2 coarse sand : 4 stone aggregate 20mm NS) P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Extra labour for laying C.C. in RCC work (A) Beldar (A) Bhishti (A) Mason 1st class (A) Mason 2nd class

Details of Cost for : 0.424 Cum Unit Quantity

Day Day Day Day

Rate

0.424

4514.03

0.042 0.085 0.017 0.017

247.00 260.00 301.00 273.00

Page 105 of 2298

0128 05.009.05

9999

(A) Mate Day Form workCentering & shuttering including strutting, propping etc. Lintels, beams, plinth beams, (Rate as per item N . 5.9.5 (B) Sundries and for lifting materials L.S.

0.017

260.00

4.09

262.19

21.58

1.49 Total: 78.80

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 79.59 Cost for 0.424 Cum Rate per One Cum: Rate as per DSR-12:

Rs 7259.06 Rs 7259.65

Item Code: 5.20 Encasing rolled steel section in grillages with CC 1:2:4 Code

04.001.03

0114 0101 0123 0124 0128 05.009.05

Description Details of cost for the grillage 3.50mx3.50mxl.00m Cement concrete 1:2:4 3.50mx3.50xl.00=12.25cumCement concrete 1:2:4 P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Extra labour for laying C.C. in RCC work (Rate as (B) in item 5.12) Beldar Bhishti Mason 1st class Mason 2nd class Mate Shuttering : Centering & shuttering including strutting, propping etc. Lintels, beams, plinth beams,

Details of Cost for : 12.25 Cum Unit Quantity

Rate

12.25

4514.03

1.225 2.45 0.49 0.49 0.49

247.00 260.00 301.00 273.00 260.00

14.00

262.19

Add water charges @ 1% except on [A]+[B] i.e on

Total: 1348.24

Day Day Day Day Day

Add C.P & OH @15% except on [A]+[B] i.e on 1361.72 Cost for 12.25 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4941.51 Rs 4941.60

Item Code: 5.21 Extra for P/F expanded metal mesh for encasing of rolled steel sections in beams, columns etc Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS: Expended metal 20 mm x 60 mm and 1.6 mm thick = 10 sqm

1015 9999 9999 0102 0114

DSR-12

wastage 5 % = 0.50 sqm Total =10.50 sqm Carriage of expended metal Wire for tieing Cost of bending and placing in position Blacksmith 1st class Beldar

Rate

sqm L.S. L.S.

10.50 13.52 13.52

270.00 1.49 1.49

Day Day

0.25 0.25

301.00 247.00

Page 106 of 2298

Add water charges @ 1% on

Total: 3012.28

Add C.P & OH @15% on 3042.40 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 349.88 Rs 349.90

Item Code: 5.22.1 Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensile steel bars. Details of Cost for : 100.00 Kg Code Description Unit Quantity MATERIALS: Mild steel bars = 1.00 q Add 5% wastage = 0.05 1004

Total = 1.05 q

2205 9999

Carraige of Steel Cover block

Rate

quint tonne

1.05 0.105

4050.00 77.87

L.S.

26.00

1.49

Day Day

1.00 1.00

301.00 247.00

L.S.

26.91

1.49 Total: 4887.52

LABOUR: For straightening, cutting, bending, binding and placing in position0102 0114 9999

Blaks smith I Class Beldar Sundries and binding wire L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 4936.40 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 56.77 Rs 56.75

Item Code: 5.22.2 Reinforcement for RCC work :- Upto plinth level - Hard drawn steel wire. Code

1224 2205

0102 0114 9999

Description MATERIALS: Hard drawn steel wire = 1.00 q wastage 5%=0.05q Total = 1.05 q Carriage 1.05q = 0.105 tonne LABOUR: For cutting and laying in position etcBlacksmith 1st class Beldar Sundries

Details of Cost for : 100.00 Kg Unit Quantity

Rate

quint tonne

1.05 0.105

4200.00 77.87

Day Day L.S.

1.00 1.00 26.91

301.00 247.00 1.49 Total: 5006.28

Add water charges @ 1% on

Add C.P & OH @15% on 5056.34 Cost for 100.00 Kg

DSR-12

Page 107 of 2298

Rate per One Kg: Rate as per DSR-12:

Rs 58.15 Rs 58.15

Item Code: 5.22.3 Reinforcement for RCC work : Upto plinth level - Cold twisted bars. Code

Details of Cost for : 100.00 Kg Unit Quantity

Description

Rate

MATERIALS: Deformed twisted steel bars = 1.00 q wastage 5% = 0.05q 1005 2205

Twisted steel / deformed bars Carriage of steel 1.05/10 = 0.105t

9999

Cover Block

quint

1.05

4500.00

tonne

0.105

77.87

L.S.

26.00

1.49

Day Day

1.00 1.00

301.00 247.00

L.S.

26.91

1.49 Total: 5360.02

LABOUR : For straightening, cutting, bending, binding and placing in position0102 0114 9999

Blacksmith 1st class Beldar Sundries and binding wire

Add water charges @ 1% on

Add C.P & OH @15% on 5413.62 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 62.26 Rs 62.25

Item Code: 5.22.4 Reinforcement for RCC work :- Upto plinth level - Hot rolled deformed bars. Code

1005 2205 9999

0102 0114 9999

Description

Details of Cost for : 100.00 Kg Unit Quantity

MATERIALS: Deformed twisted steel bars = 1.00 q wastage 5 % =0.05q Total = 1.05q quint Carriage of steel 1.05/10 = 0.105t tonne Cover block L.S. LABOUR: For straightening, cutting, bending, binding and placing in positionBlacksmith 1st class Day Beldar Day Sundries and binding wire L.S.

Rate

1.05 0.105 26.00

4500.00 77.87 1.49

1.00 1.00 26.91

301.00 247.00 1.49 Total: 5360.02

Add water charges @ 1% on

Add C.P & OH @15% on 5413.62 Cost for 100.00 Kg Rate per One Kg:

DSR-12

Rs 62.26

Page 108 of 2298

Rate as per DSR-12:

Rs 62.25

Item Code: 5.22.5 Reinforcement for RCC work :- Upto plinth level - Hard drawn steel wire fabric. Details of Cost for : 100.00 Kg Code Description Unit Quantity MATERIALS: Hard drawn steel wire fabric 100kg/7.75kg = 12.903 sqm., wastage 5 % = 0.64 sqm 1021 Total =13.548 sqm. sqm 13.548 2205 Carriage 1.05q = 0.105 tonne tonne 0.105 9999 Cover block L.S. 26.00 LABOUR: For cutting and laying in position. 0103 Blacksmith 2nd class Day 0.20 0114 Beldar Day 1.50 9999 Sundries and binding wire L.S. 13.52 Add water charges @ 1% on

Rate

430.00 77.87 1.49

273.00 247.00 1.49 Total: 6317.80

Add C.P & OH @15% on 6380.98 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 73.38 Rs 73.40

Item Code: 5.22.6 Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Upto plinth level ThermoMechanically Treated bars. Details of Cost for : 100.00 Kg Code Description Unit Quantity Rate Qty of TMT bars : 1.00 q add 5% wastage : 0.05q Total : 1.05q 1005-A

Thermo mechanically treated steel bars (for reinforcement)

9999

Cover blocks

Qtl

1.05

4500.00

L.S.

26.00

1.49

Day Day L.S.

1.00 1.00 26.91

301.00 247.00 1.49 Total: 5351.84

For straightening, cutting, bending, binding and placing in position0102 0114 9999

Blaks smith I Class Beldar Sundries

Add water charges @ 1% on

Add C.P & OH @15% on 5405.36 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 62.16 Rs 62.25

Item Code: 5.23 Smooth finishing of exposed surface in RCC work with 6 mm CM 1:3. Details of Cost for : 10.00 Sqm

DSR-12

Page 109 of 2298

Code 03.003 0155 0115 0101 9999 9999

Description Unit MATERIALS: Cement mortar 1:3 (1 cement : 3 fine sand) (Rate as per items No. 3.3) Mason Day Coolie Day Bhisti Day Extra for removing burrs, cleaning with wire brushes pock L.S. marking with pointed tool etc. c Scaffolding and Sundries L.S.

Quantity

Rate

0.072

3631.93

0.51 0.75 0.92 13.39

287.00 247.00 260.00 1.49

11.70

1.49 Total: 869.70

Add water charges @ 1% on

Add C.P & OH @15% on 878.40 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 101.02 Rs 101.00

Item Code: 5.24 Extra for rendring smooth on top of suspended floors with CM 1 : 2 Code 03.007 0367 2209 0123 0124 0114 9999 0983 2261 9999 9999

Description MATERIALS: Cement mortar 1:2 (1 cement : 2 coarse) (Rate as per item No. 3.2 finishing (Floating coat) cement Carriage of cement Labour: Mason I class Mason II class Beldar Spreading earth on floor (7.5mm thick) Spreading sand 15mm thick on floor Fine sand Carriage of sand Labour: Disposal of earth spread over floor protectiron Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Cum

Rate

0.03

4863.86

0.0213 0.0213

5000.00 77.87

Day Day Day L.S.

0.20 0.20 0.25 35.49

301.00 273.00 247.00 1.49

cum cum

0.15 0.15

640.00 87.60

L.S. L.S.

5.33 6.24

1.49 1.49 Total: 609.89

tonne tonne

Add water charges @ 1% on

Add C.P & OH @15% on 615.99 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 70.84 Rs 70.85

Item Code: 5.25 P/F in position copper plate for expansion joints . Code

0967 0103 9999

DSR-12

Details of Cost for : 10.56 Kg Description Unit Quantity Details of cost for 3.0 m lenght, width 250mm and 1.6 mm thick = 0.750 sqm Weight of copper plate @ 14.08 kg/m² 10.56kg kilog 10.56 LABOUR Blacksmith 2nd class Day 0.25 Sundries L.S. 6.24

Rate

270.00 273.00 1.49

Page 110 of 2298

Add water charges @ 1% on

Total: 2928.75

Add C.P & OH @15% on 2958.04 Cost for 10.56 Kg Rate per One Kg: Rate as per DSR-12:

Rs 322.14 Rs 322.15

Item Code: 5.26 Providing and filling in position, blown bitumen in expansion joints. Code 0313

2211 0370

2200 0123 0124 0114 9999

Details of Cost for : 11250.00 units Unit Quantity Rate

Description MATERIAL :Bitumen 85/25 @ 1050kg per cum. 1.25x1050kg = 1181.25kg Add wastage @ 5% = 59.06 kg. = 1240.31 kg = 1.2401 Carriage of bitumen Steam coal for heating of bitumen @ 2.0 quintal per tonne of bitumen. 1.240x2.0=2.48q=0.248t Carriage of steam coal Labour for heating, mixing and fillingMason 1 st class Mason 2nd class Beldar Sundries

tonne

1.24

37000.00

tonne quint

1.24 2.48

87.60 400.00

tonne

0.248

100.11

2.52 2.52 8.06 121.16

301.00 273.00 247.00 1.49 Total: 50623.28

Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 51129.51 Cost for 11250.00 units Rate per /cm/cm/100: Rate as per DSR-12:

Rs 522.66 Rs 522.65

Item Code: 5.27 P/F in position bitumen mix filler for expansion joints. Code

0309 2211 0370 2200 0367 2209 0982 2203

DSR-12

Description MATERIALS Bitumen S-90 = 256.30 kg per cum. 256.30xl.125 = 288.34 kg. — Add for wastage @ 5% = 14.42 kg. = 302.76 kg. or = 0.303 tonne. Bitumen Carriage of bitumen Stem coal for heating of bitumen @ 2.0 quintal per tonne of bitumen, i.e. 0.303x2.0=0.606q Carriage of steam coal Cement: 1/80x228.34=3.6 kg = 0.0036 Tonne Carriage of cement Coarse sand l/4th of the quantity of cement in kg = 3.6/4 = 0.90 cum. Carriage of coarse sand Labour for heating and filling :

Details of Cost for : 11250.00 units Unit Quantity Rate

tonne tonne quint

0.303 0.303 0.606

37000.00 87.60 400.00

tonne

0.061

100.11

tonne tonne cum

0.0036 0.0036 0.90

5000.00 77.87 1120.00

0.90

87.60

cum

Page 111 of 2298

0123 0124 0114 9999

Mason 1 st class Mason 2nd class Beldar Sundries

Day Day Day L.S.

2.52 2.52 8.06 121.16

Add water charges @ 1% on

301.00 273.00 247.00 1.49 Total: 16209.00

Add C.P & OH @15% on 16371.09 Cost for 11250.00 units Rate per /cm/cm/100: Rate as per DSR-12:

Rs 167.35 Rs 167.35

Item Code: 5.28 P/F in position 12 mm thick bitumen fibre board in expansion joints. Code

0339 0316

0314 9999 0123 0124 0114 9999

Details of Cost for : 1000.00 units Description Unit Quantity Details of cost for joint 100m long 10cm deep and 12mm thick MATERIAL: (i) Impregnated fibre board lxl00x0.075=7.5sqm. (ii) Primere 80m/litter 100m=100/80 x1=1.25 lit (iii) Sealing compound @ 3m per litrer for 100m = 100/3x1 =33.3 litres+Wastage @ 5% = 1.67 = 35.00 litre (1 litre = 0.9 Kg) = 35.00x0.9 = 31.5 Kg. Carriage LABOUR: Mason 1 st class Mason 2nd class Beldar Sundries

Rate

sqm

7.50

350.00

litre

1.25

40.00

kilog

31.50

26.00

L.S.

26.91

1.49

Day Day Day L.S.

0.12 0.12 0.25 26.91

301.00 273.00 247.00 1.49 Total: 3704.83

Add water charges @ 1% on

Add C.P & OH @15% on 3741.88 Cost for 1000.00 units Rate per /cm/cm/100: Rate as per DSR-12:

Rs 430.32 Rs 430.30

Item Code: 5.29.1.1 P/F sheet covering over expansion joints. Non-asbestos fibre board 6 mm thick 150 mm wide. Details of Cost for : 3.00 m Code Description Unit Quantity MATERIALS: 0236 Non - Asbestos multi purpose fibre cement sqm 0.47 board 6mm thick. 2273 Carriage of sheets- 0.45sqm = 0.0049 tonne tonne 0.0049 9999 50mm iron screws with washer and rawl plugs L.S. 40.30 LABOUR: 0112 Carpenter 2nd class Day 0.20 0114 Beldar Day 0.20

DSR-12

Rate 182.00 77.87 1.49

Add water charges @ 1% on

273.00 247.00 Total: 249.97

Add C.P & OH @15% on

252.47

Page 112 of 2298

Cost for 3.00 m Rate per One Metre: Rate as per DSR-12:

Rs 96.78 Rs 96.80

Item Code: 5.29.1.2 P/F sheet covering over expansion joints. Non-asbestos fibre board 6 mm thick 200 mm wide. Details of Cost for : 3.00 m Code Description Unit Quantity MATERIALS: 0236 Non - Asbestos multi purpose fibre cement board 6mm thick. sqm 0.63 2273 9999 0112 0114

Carriage of sheet 0.60sqm. = 0.0065 tonne 50mm iron screws with washer and rawl plugs LABOUR: Carpenter 2nd class Beldar

tonne L.S. Day Day

Rate 182.00

0.0065 53.82

77.87 1.49

0.27 0.27

273.00 247.00 Total: 335.76

Add water charges @ 1% on

Add C.P & OH @15% on 339.12 Cost for 3.00 m Rate per One Metre: Rate as per DSR-12:

Rs 130.00 Rs 130.00

Item Code: 5.29.2.1 P/F sheet covering over expansion joints. Aluminium fluted strips 3.15 mm thick : 150 mm wide. Details of Cost for : 1.00 m Code Description Unit Quantity MATERIALS: 2391 3.15mm thick aluminium fluted metre 1.00 strips-1 m x 15cm wide 0639 Iron screws 25mm 100 N 6.00 9999 Carriage of materials L.S. 1.04 LABOUR: 0112 Carpenter 2nd class Day 0.067 0114 Beldar Day 0.067 9999 Sundries L.S. 1.82 Add water charges @ 1% on

Rate 228.00 30.00 1.49 273.00 247.00 1.49 Total: 268.90

Add C.P & OH @15% on 271.59 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 312.33 Rs 312.35

Item Code: 5.29.2.2 P/F sheet covering over expansion joints. Aluminium fluted strips 3.15 mm thick : 200 mm wide. Details of Cost for : 1.00 m Code Description Unit Quantity MATERIALS: 2392 Strips Aluminium fluted 3.15mm thick and Metre 1.00 200mm wide metre 0639 Iron serews 25mm 100 N 6.00 9999 Carriage of materials L.S. 1.30

DSR-12

Rate 323.00 30.00 1.49

Page 113 of 2298

0112 0114 9999

LABOUR: Carpenter 2nd class Beldar Sundries

Day Day L.S.

0.089 0.089 2.34

Add water charges @ 1% on

273.00 247.00 1.49 Total: 376.51

Add C.P & OH @15% on 380.28 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 437.32 Rs 437.30

Item Code: 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Details of Cost for : 30.00 m Code Description Unit Quantity LABOUR: 0123 Mason I class Day 0.50 0124 Mason II class Day 0.50 0115 Coolie Day 1.00 9999 Add for materials (cement mortar etc.) L.S. 26.91 Add water charges @ 1% on

Rate 301.00 273.00 247.00 1.49 Total: 574.10

Add C.P & OH @15% on 579.84 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 22.23 Rs 22.25

Item Code: 5.31 Extra for laying RCC in or under water and/or liquid mud Code

0011 0114

Description Analysis Same As As Per Item No 4.15 Details of cost for depth of water 0.30m. Quantity of concrete = 14 cum. pumping hours = 3 hrs. or 0.375 day. Cost of pumping water with 3636.7 litres per hour capacity pump Beldar for cleaning slush

Details of Cost for : 4.20 Cum Unit Quantity

Rate

Day

0.375

500.00

Day

4.00

247.00 Total: 1175.50

Add water charges @ 1% on

Add C.P & OH @15% on 1187.26 Cost for 4.20 Cum Rate per One Cum: Rate as per DSR-12:

Rs 325.08 Rs 325.10

Item Code: 5.32 Extra for laying RCC in or foul position Code

DSR-12

Description Analysis Same As Item No 4.16 Extra labour due to slow progress-

Details of Cost for : 1.00 Cum Unit Quantity

Rate

Page 114 of 2298

0123 0124 0114 0115

Mason 1 st class Mason 2nd class Beldar Coolie

Day Day Day Day

0.02 0.02 0.25 0.15

Add water charges @ 1% on

301.00 273.00 247.00 247.00 Total: 110.28

Add C.P & OH @15% on 111.38 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 128.09 Rs 128.10

Item Code: 5.33.1 P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping of concrete to site, including admixtures .. Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIAL: 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.57 1050.00 0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.28 1050.00 2202 Carraige of Stone aggregate below 40 mm nominal size cum 0.85 87.60 0982 Coarse sand (zone III) cum 0.425 1120.00 2203 Carraige of Coarse sand cum 0.425 87.60 0367 Portland Cement tonne 0.33 5000.00 2209 Carraige of Cement tonne 0.33 77.87 7318 Plasticizer / super plasticizer 0.50% OF cement kilog 1.65 36.50 Production cost, pumping to respective floors and laying in position 0004 Production cost of concrete by batch mix plant. cum 1.00 350.00 0009 Pumping charges of concrete including Hire charges of pump, cum 1.00 130.00 piping work & accessories etc. Labour for pouring, consolidating & curing 0155 Mason (average) Day 0.17 287.00 LABOUR: 0114 Beldar Day 2.00 247.00 0101 Bhisti Day 0.90 260.00 0012 Vibrator (Needle type 40mm) Day 0.07 300.00 9999 Sundries L.S. 13.00 1.49 Total: Add water charges @ 1% on 4513.28 Add C.P & OH @15% on 4558.41 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5242.17 Rs 5242.15

Item Code: 5.33.2 P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping of concrete to site, including admixtures .. All work above pilnth Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIAL: 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.57 1050.00 0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.28 1050.00 2202 Carraige of Stone aggregate below 40 mm nominal size cum 0.85 87.60

DSR-12

Page 115 of 2298

0982 2203 0367 2209 7318

0004 0009

0155 0114 0101 0012 9999

0115

Coarse sand (zone III) Carraige of Coarse sand Portland Cement Carraige of Cement Plasticizer / super plasticizer 0.50% OF cement Production cost, pumping to respective floors and laying in position Production cost of concrete by batch mix plant. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. LABOUR: Labour for pouring, consolidating & curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries Extra labour for lifting upto floor five level 0.75 x 2.50 = 1.88 Coolie

cum cum tonne tonne

0.425 0.425 0.33 0.33

1120.00 87.60 5000.00 77.87

kilog

1.65

36.50

cum cum

1.00 1.00

350.00 130.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49

Day

1.88

247.00 Total: 4977.64

Add water charges @ 1% on

Add C.P & OH @15% on 5027.42 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5781.53 Rs 5781.50

Item Code: 5.34.1 Add or deduct for richer or leaner mix M-30 instead of M-25. Code

0367 2209

7318

Description Cement for M-30 mix = 0.400 t Cement for M-25 mix = 0.380 t Difference 0.020t Carriage of Cement Plasticizer for M-30 mix = 2.10 Kg Plasticizer for M-25 mix = 2.05 Kg Diffevence =0.05 kg. Plasticizer / super plasticizer

Details of Cost for : 1.00 Cum Unit Quantity

Rate

tonne tonne

0.01 0.01

5000.00 77.87

kilog

0.10

36.50 Total: 54.43

Add water charges @ 1% on

Add C.P & OH @15% on 54.97 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 63.22 Rs 63.20

Item Code: 5.34.2 Add or deduct for richer or leaner mix M-35 instead of M-25. Code

0367

DSR-12

Description Cement for M-35 mix = 0.350 t Cement for M-25 mix = 0.330 t Difference 0.02 t

Details of Cost for : 1.00 Cum Unit Quantity

tonne

0.02

Rate

5000.00

Page 116 of 2298

2209

7318

Carraige of Cement Plasticizer for M-35 mix = 2.100 Kg Plasticizer for M-25mix = 1.90 Kg Diffevence =0.20 kg. Plasticizer / super plasticizer

tonne

0.02

77.87

kilog

0.20

36.50 Total: 108.86

Add water charges @ 1% on

Add C.P & OH @15% on 109.95 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 126.44 Rs 126.45

Item Code: 5.34.3 Add or deduct for richer or leaner mix M-40 instead of M-25. Code

0367 2209

7318

Details of Cost for : 1.00 Cum Unit Quantity

Description Cement for M-40 mix = 0.360 t Cement for M-25 mix = 0.330 t Difference = 0.03 t Carriage of cement Plasticizer for M-40 mix = 2.175 Kg Plasticizer for M-25 mix = 0.125 Kg Difference =0.125kg. Plasticizer / super plasticizer

Rate

tonne tonne

0.030 0.030

5000.00 77.87

kilog

0.235

36.50 Total: 160.92

Add water charges @ 1% on

Add C.P & OH @15% on 162.53 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 186.91 Rs 186.90

Item Code: 5.35 Code 0367 2209

Details of Cost for : 1.00 Qtl Unit Quantity tonne 0.10 tonne 0.10

Description Cement Carriage of cement

Add water charges @ 1% on

Rate 5000.00 77.87 Total: 507.79

Add C.P & OH @15% on 512.87 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 589.80 Rs 589.80

Item Code: 5.36 P/P in position precast RCC waffle units for floors and roofs in 1:1.5:3 Code

DSR-12

Details of Cost for : 1.38 Cum Description Unit Quantity Details for wafle 09. x 0.9 x 0.3m Total area covered 4.548 x 3.636 = 16.54 sqm. Cement concrete in 1unit Top 0.8 x 0.8 x 0.035 = 0.0224

Rate

Page 117 of 2298

05.002.02

05.009.15

10.002

9999 9999

0126 0114

13.035.01

sides 2(0.8 x 0.265 x 0.0325) = 0.0138 2(0.735 x 0.265 x 0.0325) = 0.0127 Total = 0.0489 Flange 4 x 0.85 x 0.05 x 0.035 = 0.0060 Total = 0.0549 Add for Fillets 25% = 0.0137 Total = 0.069 cum. Quantity for 20 such units = 1.38 cum RCC work in walls, columns, pillars, piers, etc. up to floor five level excluding cost of (i) Shuttering and centring Face in contact 4 x 0.8 x 0.265 = 0.848 Inner 4 x 0.735 x 0.265 = 0.779 Top (inside) 1 x 0.735 x 0.735 = 0.540 Flange 4 x 0.9 x 0.035 = 0.126 Total = 2.293 sqm. Quantity 20 such units 45.86 sqm. Centering and shuttering .. .. : Small lintels not exceeding 1.5m clear span, moulding as Hooks for lifting 2 x 1.5 = 3.0 m 4 x 0.01 = 0.04 m = 3.04 m @ 3 kg per m 9.12 kg or 0.009 t Structural steel work riveted, bolted or welded in builtup sections, trusses etc ..and app (ii) 10 mm dia. Bolts 60 mm long with nuts and washers 2 x 2 = 4Nos. including carriage of bolts Sundries etc. (IV) Transportation and erection labour for 20 units Mason (for ornamental stone work) 1st class Beldar (V) Cost of pointing flush or deep ruled in cement mortar 1:2 (1 Cement : 2 fine sand) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine sand): Flush/ Rule

1.38

5735.75

45.86

166.88

9.00

66.52

L.S. L.S.

13.00 79.95

1.49 1.49

Day Day

1.00 6.00

301.00 247.00

16.54

63.75

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 1921.50

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 1940.72 Cost for 1.38 Cum Rate per One Cum: Rate as per DSR-12:

Rs 14096.67 Rs 14097.20

Item Code: 5.37.1 P/L RM M-25 grade concrete for RCC work (using cement @ 330 kg/cum) - All work upto plinth level Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS: 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.57 0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.28 2202 Carraige of Stone aggregate below 40 mm nominal size cum 0.85 0982 Coarse sand (zone III) cum 0.425 2203 Carraige of Coarse sand cum 0.425 0367 Portland Cement tonne 0.33 2209 Carraige of Cement tonne 0.33

DSR-12

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

Page 118 of 2298

7318

0004 0029 0009

0155 0114 0101 0012 9999

Plasticizer / super plasticizer (0.5% of cement ) Production Cost, carraige to site, pumping to respective floors and laying in position Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. Labour for pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries

kilog

1.65

36.50

cum km/ c cum

1.00 10.00 1.00

350.00 30.00 130.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49 Total: 4813.28

Add water charges @ 1% on

Add C.P & OH @15% on 4861.41 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5590.62 Rs 5590.60

Item Code: 5.37.2 P/L RM M-25 grade concrete for RCC work (using cement @ 330 kg/cum) - All work upto above plinth level upto floor five level

Code 0295 0297 2202 0982 2203 0367 2209 7318

0004 0029 0009

0155 0114 0101 0012 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Portland Cement Carraige of Cement Plasticizer / super plasticizer (0.5% of cement ) Production Cost, carraige to site, pumping to respective floors and laying in position Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. Labour for pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries Extra labour for lifting upto floor five level 0.75 x 2.5 = 1.88 Coolie

Rate

cum cum cum cum cum tonne tonne kilog

0.57 0.28 0.85 0.425 0.425 0.33 0.33 1.65

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87 36.50

cum km/ c cum

1.00 10.00 1.00

350.00 30.00 130.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49

Day

1.88

247.00 Total: 5277.64

Add water charges @ 1% on

Add C.P & OH @15% on 5330.42 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 6129.98 Rs 6130.00

Page 119 of 2298

Item Code: 5.38 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. _x000D_ Details of Cost for : 1.00 Cum Code Description Unit Quantity 0009 Pumping charges of concrete including Hire charges of cum 1.00 pump,piping work & accessories etc Add water charges @ 1% on

Rate 130.00 Total: 130.00

Add C.P & OH @15% on 131.30 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 151.00 Rs 151.00

Item Code: 5.40.1 P/L in position RMC M-25 grade for reinforced cement concrete work, using fly ash and cement manufactured in fully automatic batching plant including pumping of R.M.C. - All works up to Plinth level.

Code 0293 0295 2206 2202 0982 2203 1980 2262 0367 2209 7318

0004 0029 0009

0155 0114 0101 0012 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone Aggregate (Single size) : 40 mm nominal size (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) Stone Aggregate (Single size) : 20 mm nominal size Carraige of Stone aggregate 40 mm nominal size and above Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Fly ash Carraige of Fly ash Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries

Rate

cum

0.65

950.00

cum cum

0.24 0.65

1050.00 95.22

cum cum cum cum cum tonne tonne kilog

0.24 0.37 0.37 0.21 0.21 0.33 0.33 1.65

87.60 1120.00 87.60 7.75 87.60 5000.00 77.87 36.50

cum km/ c cum

1.00 10.00 1.00

350.00 30.00 130.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49 Total: 4752.34

Add water charges @ 1% on

Add C.P & OH @15% on 4799.86 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 5519.84 Rs 5519.40

Page 120 of 2298

Item Code: 5.40.2 P/L in position RMC M-25 grade for reinforced cement concrete work, using fly ash and cement manufactured in fully automatic batching plant including pumping of R.M.C. - All works above plinth and upto floor five level

Code 0293 0295 2206 2202 0982 2203 1980 2262 0367 2209 7318

0004 0029 0009

0155 0114 0101 0012 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Stone Aggregate (Single size) : 40 mm nominal size (0.70% - 7.5% for voids i.e 0.05 = 0.65 cum) Stone Aggregate (Single size) : 20 mm nominal size Carraige of Stone aggregate 40 mm nominal size and above Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Fly ash Carraige of Fly ash Portland Cement Carraige of Cement Plasticizer / super plasticizer Production cost, Carriage to site, pumping to respective floors and laying in position. Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. LABOUR : For pouring, consolidating and curing Mason (average) Beldar Bhisti Vibrator (Needle type 40mm) Sundries Extra labour for lifting of material upto floor five level = 0.75 x 2.5 = 1.88 Coolie

Rate

cum

0.65

950.00

cum cum

0.24 0.65

1050.00 95.22

cum cum cum cum cum tonne tonne kilog

0.24 0.37 0.37 0.21 0.21 0.33 0.33 1.65

87.60 1120.00 87.60 7.75 87.60 5000.00 77.87 36.50

cum km/ c cum

1.00 10.00 1.00

350.00 30.00 130.00

Day Day Day Day L.S.

0.17 2.00 0.90 0.07 13.00

287.00 247.00 260.00 300.00 1.49

Day

1.88

247.00 Total: 5216.70

Add water charges @ 1% on

Add C.P & OH @15% on 5268.87 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6059.20 Rs 6059.20

Item Code: 5.41.1 Supplying and applying water based concrete curing compound to concrete/ masonry surface. - Non pigmented wet curing compound Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 7178 Chemical ASTMC-type I Kg 2.00 100.00 Coverage of chemical @ 5 sqm per kg Chemical required = 10 / 2 = 5 kg 0124 Mason (brick layer) 2nd class Day 0.46 273.00 0115 Coolie Day 0.23 247.00 0101 Bhisti Day 0.10 260.00 9999 Scaffolding and sundries L.S. 8.06 1.49

DSR-12

Page 121 of 2298

0114 9999

Extra labour for cleanup process Beldar Extra machinery, hand pump, compressor etc.,

Day L.S.

0.75 80.00

Add water charges @ 1% on

247.00 1.49 Total: 724.85

Add C.P & OH @15% on 732.10 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 84.19 Rs 83.50

Item Code: 5.41.2 Supplying and applying water based concrete curing compound to concrete/ masonry surface. - Pigmented wet curing compound

Code

7281

0124 0115 0101 9999 0114 9999

Description Based on DAR item 13.44.1 MATERIALS: Chemical ASTMC-type II Coverage of chemical @ 5 sqm per kg Chemical required = 10 / 2 = 5 kg Mason (brick layer) 2nd class Coolie Bhisti Scaffolding and sundries Extra labour for cleanup process Beldar Extra machinery, hand pump, compressor etc.,

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Kg

2.00

160.00

Day Day Day L.S.

0.46 0.23 0.10 8.06

273.00 247.00 260.00 1.49

Day L.S.

0.75 80.00

247.00 1.49 Total: 844.85

Add water charges @ 1% on

Add C.P & OH @15% on 853.30 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 98.13 Rs 97.00

Item Code: 5.42.1 P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 16 mm diameter reinforcement bar Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 2394 Coupler 16 mm dia Nos 1.00 67.50 LABOUR: 9999 For placing in position and fixing L.S. 3.77 1.49 9999 Tapered / Parallel threading charges L.S. 17.77 1.49 Total: Add water charges @ 1% on 99.60 Add C.P & OH @15% on 100.60 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 115.69 Rs 115.65

Page 122 of 2298

Item Code: 5.42.2 P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 20 mm diameter reinforcement bar Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 2395 Coupler 20 mm dia Nos 1.00 87.75 LABOUR: 9999 For placing in position and fixing L.S. 5.90 1.49 9999 Tapered / Parallel threading charges L.S. 25.17 1.49 Total: Add water charges @ 1% on 134.04 Add C.P & OH @15% on 135.38 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 155.69 Rs 155.70

Item Code: 5.42.3 P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 25 mm diameter reinforcement bar Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 2396 Coupler 25 mm dia Nos 1.00 129.50 LABOUR: 9999 For placing in position and fixing L.S. 8.69 1.49 9999 Tapered / Parallel threading charges L.S. 29.61 1.49 Total: Add water charges @ 1% on 186.57 Add C.P & OH @15% on 188.44 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 216.71 Rs 216.70

Item Code: 5.42.4 P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 28mm diameter reinforcement bar Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 2397 Coupler 28 mm dia Nos 1.00 191.25 LABOUR: 9999 For placing in position and fixing L.S. 12.84 1.49 9999 Tapered / Parallel threading charges L.S. 32.57 1.49 Total: Add water charges @ 1% on 258.91 Add C.P & OH @15% on 261.50 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 300.73 Rs 300.75

Page 123 of 2298

Item Code: 5.42.5 P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 32 mm diameter reinforcement bar Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 2398 Coupler 32 mm dia Nos 1.00 230.50 LABOUR: 9999 For placing in position and fixing L.S. 15.48 1.49 9999 Tapered / Parallel threading charges L.S. 32.57 1.49 Total: Add water charges @ 1% on 302.10 Add C.P & OH @15% on 305.12 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 350.89 Rs 350.90

Item Code: 5.43.1 P/F Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. -200 mm wide. Details of Cost for : 1.00 m Code Description Unit Quantity MATERIALS: 2393 1 mm thick Stainless Steel Cover plate grade 304 Kg 1.60 8647 Stainless steal screws 30mm x4mm. cent 0.06 9999 Carriage of material L.S. 1.30 LABOUR: 0103 Blacksmith 2nd class Day 0.067 0114 Beldar Day 0.067 9999 Sundries L.S. 2.34 Add water charges @ 1% on

Rate 275.00 29.00 1.49 273.00 247.00 1.49 Total: 482.01

Add C.P & OH @15% on 486.83 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 559.85 Rs 559.85

Item Code: 5.43.2 P/F Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. -300 mm wide. Details of Cost for : 1.00 m Code Description Unit Quantity MATERIALS: 2393 1 mm thick Stainless Steel Cover plate grade 304 Kg 2.40 8647 Stainless steal screws 30mm x4mm. cent 0.06 9999 Carriage of material L.S. 1.30 LABOUR: 0103 Blacksmith 2nd class Day 0.067 0114 Beldar Day 0.067 9999 Sundries L.S. 2.34 Add water charges @ 1% on

Rate 275.00 29.00 1.49 273.00 247.00 1.49 Total: 702.01

Add C.P & OH @15% on 709.03 Cost for 1.00 m

DSR-12

Page 124 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 815.38 Rs 815.40

Item Code: 6.1.1 Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cement : 4 coarse sand)

Code 2602 03.009 2201 9999 0123 0124 0115 0101

Description

Details of Cost for : 1.00 Cum Unit Quantity

MATERIALS : Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Cement mortar 1:4 (1 cement : 4 coarse sand). Carriage of bricks 1000 Sundries L.S. LABOUR: Mason 1st Class Day Mason Ilnd Class Day Coolie Day Bhishti Day

Rate

494.00

2900.00

0.25 494.00 2.73

3485.41 233.60 1.49

0.36 0.36 1.37 0.20

301.00 273.00 247.00 260.00 Total: 3020.45

Add water charges @ 1% on

Add C.P & OH @15% on 3050.65 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3508.25 Rs 3508.25

Item Code: 6.1.2 B/W with bricks of class 75 in found & plinth in in CM 1:6 Code 2602 03.011 2201 9999 0123 0124 0115 0101

Description

Details of Cost for : 1.00 Cum Unit Quantity

MATERIALS : Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Cement mortar 1:6 (1 cement : 6 coarse sand). Carriage of bricks 1000 Sundries L.S. LABOUR: Mason 1st Class Day Mason Ilnd Class Day Coolie Day Bhishti Day

Rate

494.00

2900.00

0.25 494.00 2.73

2825.29 233.60 1.49

0.36 0.36 1.37 0.20

301.00 273.00 247.00 260.00 Total: 2855.42

Add water charges @ 1% on

Add C.P & OH @15% on 2883.97 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3316.57 Rs 3316.55

Item Code: 6.2.1 B/W with modular bricks in found & plinth in CM 1:4 Code

Description

Details of Cost for : 1.00 Cum Unit Quantity

Rate

MATERIALS:

DSR-12

Page 125 of 2298

7900

Modular common burnt clay bricks of class designation 7.5

1000

487.00

3150.00

2201 03.009 9999

Carraige of Bricks Cement mortar 1:4 (1 cement : 4 coarse sand). Sundries LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti

1000 Cum L.S.

487.00 0.22 2.73

233.60 3485.41 1.49

0.33 0.33 1.00 0.18

301.00 273.00 247.00 260.00 Total: 2901.89

0123 0124 0115 0101

Day Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 2930.91 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3370.55 Rs 3370.55

Item Code: 6.2.2 B/W with modular bricks in found & plinth in CM 1:6 Code 7900 2201 03.011 9999 0123 0124 0115 0101

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS : Modular common burnt clay bricks of class designation 7.5 Carriage of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). (Rates as per item no. 3.11) Sundries LABOUR: Mason 1st Class Mason Ilnd Class Coolie Bhishti

Rate

1000

487.00

3150.00

1000

487.00 0.22

233.60 2825.29

L.S.

2.73

1.49

Day Day Day Day

0.33 0.33 1.00 0.18

301.00 273.00 247.00 260.00 Total: 2756.66

Add water charges @ 1% on

Add C.P & OH @15% on 2784.23 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3201.86 Rs 3201.90

Item Code: 6.3.1 Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 in superstructure above plinth level up to floor five level in CM 1:6 (1 cement : 6 coarse sand) -With FPS bricks

Code 7901 2201 03.011 9999 0123

DSR-12

Description

Details of Cost for : 1.00 Cum Unit Quantity

MATERIALS: Machine moulded perforated FPS bricks of class designation 1000 12.5 Carraige of Bricks 1000 Cement mortar 1:6 (1 cement : 6 coarse sand). Cum Sundries L.S. LABOUR: Mason (brick layer) 1st class Day

Rate

494.00

4150.00

494.00 0.25 2.73

233.60 2825.29 1.49

0.47

301.00

Page 126 of 2298

0124 0115 0101 9999

0115

Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Scaffolding L.S. Extra labour element required for lifting of materials (above floor two level upto floor five level) Coolie Day

0.47 1.80 0.20 22.36

273.00 247.00 260.00 1.49

1.13

247.00 Total: 3954.70

Add water charges @ 1% on

Add C.P & OH @15% on 3994.25 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4593.39 Rs 4593.40

Item Code: 6.3.2 Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 in superstructure above plinth level up to floor five level in CM 1:6 (1 cement : 6 coarse sand) -With Modular bricks

Code 7902 2201 03.011 9999 0123 0124 0115 0101 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Machine moulded modular perforated bricks of class designation 12.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti Scaffolding Extra labour element required for lifting of materials (above floor two level upto floor five level) Coolie

Rate

1000

487.00

3800.00

1000 Cum L.S.

487.00 0.22 2.73

233.60 2825.29 1.49

Day Day Day Day L.S.

0.44 0.44 1.43 0.18 16.38

301.00 273.00 247.00 260.00 1.49

Day

1.13

247.00 Total: 3546.08

Add water charges @ 1% on

Add C.P & OH @15% on 3581.54 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4118.77 Rs 4118.80

Item Code: 6.4.1 Brick work with FPS bricks of class designation 75 in super structure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Code 2602 03.009 2201 9999

DSR-12

Description

Details of Cost for : 1.00 Cum Unit Quantity

MATERIALS : Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Cement mortar 1:4 (1 cement : 4 coarse sand). Carriage of bricks 1000 Sundries L.S.

Rate

494.00

2900.00

0.25 494.00 2.73

3485.41 233.60 1.49

Page 127 of 2298

0123 0124 0115 0101 9999

0115

LABOUR: Mason 1 st Class Day Mason Ilnd Class Day Coolie Day Bhishti Day Scaffolding L.S. Extra labour element required for lifting of materials (above floor two level upto floor five level) Coolie Day

0.47 0.47 1.80 0.20 22.36

301.00 273.00 247.00 260.00 1.49

1.13

247.00 Total: 3502.23

Add water charges @ 1% on

Add C.P & OH @15% on 3537.25 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4067.84 Rs 4067.85

Item Code: 6.4.2 Brick work with FPS bricks of class designation 75 in super structure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Code 2602 03.011 2201 9999 0123 0124 0115 0101 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Common burnt clay F.P.S (non modular) Bricks of class designation 7.5 Cement mortar 1:6 (1 cement : 6 coarse sand). Carraige of Bricks Sundries LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti Scaffolding Extra labour element required for lifting of material ( Above floor II level to Floor V level) Coolie

Rate

1000

494.00

2900.00

Cum 1000 L.S.

0.25 494.00 2.73

2825.29 233.60 1.49

Day Day Day Day L.S.

0.47 0.47 1.80 0.20 22.36

301.00 273.00 247.00 260.00 1.49

Day

1.13

247.00 Total: 3337.20

Add water charges @ 1% on

Add C.P & OH @15% on 3370.57 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3876.16 Rs 3876.15

Item Code: 6.5 Extra for BW in SS above floor 5 level Code 0037 1235

Description Details of cost for 5.3 cum per four floors . Mobile crane. Fuel consumption per hour = 8 litre. Diesel oil

Details of Cost for : 5.30 Cum Unit Quantity per d

0.125

6500.00

litre

8.00

41.29 Total: 1142.82

Add water charges @ 1% on

DSR-12

Rate

Page 128 of 2298

Add C.P & OH @15% on 1154.25 Cost for 5.30 Cum Rate per One Cum: Rate as per DSR-12:

Rs 250.45 Rs 250.45

Item Code: 6.6 Extra for forming cavity 5 cm to 7.5 cm wide in cavity walls Code 1008 9999 2205

0123 0124 0114 9999

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS : Mild steel 25mmx3mm section 30cm long 30 quint No. = 9 metres @ 0.6kg/m = 5.40 kg. Painting the steel Bitumen L.S. Carriage of mild steel tonne Extra labour for keeping cavity clear and fixing wall ties and delay caused: Mason 1st class Day Mason 2nd Class Day Beldar Day Add for use of Core L.S.

Rate

0.054

4200.00

13.52 0.005

1.49 77.87

0.37 0.37 0.92 4.55

301.00 273.00 247.00 1.49 Total: 693.73

Add water charges @ 1% on

Add C.P & OH @15% on 700.67 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 80.58 Rs 80.60

Item Code: 6.7 Providing half brick masonry with bricks of class 75 in CM 1:3 in s/s for closing cavity Details of Cost for : 10.00 m Code Description Unit Quantity Details of cost for 10m length MATERIALS : Half brick masonry 1:3 (Average) 1x10x0.27 = 2.7 06.012.01 Half brick masonry with bricks of class 75 in found & plinth in 2.70 CM 1:3 Bitumen felt type- 3 grade 1 lxl0mx11.4m =1.14 sqm. Add for wastage and overlapping @ 5% = 0.06 sqm. 0322 Total sqm 1.20 LABOUR: 0123 Mason 1st class Day 0.12 0124 Mason 2nd class Day 0.12 0114 Beldar Day 0.06 Add water charges @ 1% except on [A] i.e on

Rate

438.41

50.00 301.00 273.00 247.00 Total: 143.70

Add C.P & OH @15% except on [A] i.e on 145.14 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 135.06 Rs 135.05

Page 129 of 2298

Item Code: 6.8 Code 2602 03.008 2201 0123 0124 0115 0101 9999

0115

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS: Common burnt clay F.P.S (non modular) Bricks of class designation 7.5 Cement mortar 1:3 (1 cement : 3 coarse sand) Carriage of bricks LABOUR: Mason 1st class Mason 2nd class Coolie Bhishti Sundries and scaffolding Extra labour for lifting of material (Above floor two level upto floor five level) Coolie

Rate

1000

377.00

2900.00

1000

0.181 377.00

4145.53 233.60

Day Day Day Day L.S.

0.72 0.72 1.76 0.36 7.15

301.00 273.00 247.00 260.00 1.49

Day

1.29

247.00 Total: 3202.59

Add water charges @ 1% on

Add C.P & OH @15% on 3234.62 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 371.98 Rs 372.00

Item Code: 6.9 B/W in plain arches in s/s for span upto 6 m with bricks in CM 1:3 Code 2602 03.008 2201 9999

05.009.09

9999 0123 0124 0115 0101

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description

MATERIALS : Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Cement mortar 1:3 (1 cement : 3 coarse sand) Carriage of bricks 1000 Sundries L.S. Centering and Shuttering: Taking a semi circular arch 3.6m span, 3.6m long and 0.40m thick Area of centering = 3.142 x 1.8 x 3.6 = 20.37 sqm. Brick work in Arch. 3.142x2.00x0.4x3.6 = 9.05cum. Area per cum. C/S i/c strutting, propping etc at all level Arches, domes etc (Rate same as in item 5.9.9 Scaffolding LABOUR: Mason 1st class Mason 2nd class Coolie Bhishti Extra labour for lifting of material (above floor two level upto floor five level) Coolie

494.00

2900.00

0.25 494.00 2.73

4145.53 233.60 1.49

2.25

866.70

L.S.

18.85

1.49

Day Day Day Day

0.53 0.53 2.29 0.20

301.00 273.00 247.00 260.00

Day

1.13

247.00 Total: 3817.50

Add water charges @ 1% except on [A] i.e on

DSR-12

Rate

Page 130 of 2298

Add C.P & OH @15% except on [A] i.e on 3855.68 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6384.11 Rs 6384.10

Item Code: 6.11 Extra for additional cost of centring for arches exceeding 6 m Code

1197 2204

1225

1034

2302 0112 0114 9999

DSR-12

Description Centering and shuttering for arches and carved surface exceeding 6m in span (an average of 8m) Radius R = 5m 2R-2=4+4 ArcTan (4/3)=53.28° 2x53.28°=106° Surface area =2x22/7x5x3.6x106/360=33.3 sqm. Arc=9.25m MATERIAL: Tie-2x8x0.18x0.05 =0.144cum Struts-2x2.5x0.1x0.1 =0.050cum. Struts-2x1.77x0.1x0.1 =0.035cum. Ribs-6x1.54x0.23x0.1 =0.213cum. Struts-2x1.72x0.1x0.1 =0.034cum. Total=0.476cum. For four such frames =0.476x4= 1.904 cum. laggings-75x3.6x0.125x0.075=2.531 cum. Tie-2x3.6x0.225x0.038=0.062cum. Brace-3x2x2.14x0.225x0.038=0.110 Brace-3x4x3.8x0.225x0.038=0.390 Sleepers-4x3.6x0.20x0.15=0.432 Sleepers-2x4x3.6x0.175x0.075=0.378 Vertical post-4x4x3.6x0.15x0.15=1.296 Total =7.103cum. Qty taken l/8th of qty for cost using once = 7.103/8 = 0.8885 cum (887.90 cudm) Carriage of wood Fittings: 3 way straps 50mmxl0mm = 32 Nos. 32 no. @0.50cm each = 16m Straps-50mmx 10mm = 8 Nos. @0.25cm each = 2m Total = 18m 18m @ 3.9kg/m = 70.2 kg. = 0.702qtl. Qty taken l/8th of qty for cost using once = 0.702/8 = 0.0878 qtl. Bolts 160 Nos. 254 mm long 16mm dia.160x 0.254x 1.58=64.21 kg=0.64qtl. Qty taken 1/8th of qty for cost using once = 0.64/8 = 0.08 qtl. Carriage of steel = 0.1342 t Qty taken 1/8th of qty for cost using once = 0.1342/8 = 0.0168 tonne LABOUR: Carpenter 2nd class Beldar Sundries Less Cost of shuttering etc. for an arch exceeding 6 m span i.e. for an average of 8 m span

Details of Cost for : 33.31 Sqm Unit Quantity

Rate

cum

0.8879

25000.00

cum

0.8879

100.11

quint

0.0878

3950.00

quint

0.08

5400.00

tonne

0.0168

77.87

Day Day L.S.

28.00 24.00 134.55

273.00 247.00 1.49

Page 131 of 2298

05.009.09

C/S i/c strutting, propping etc at all level Arches, domes etc

-33.31

866.70

Add water charges @ 1% except on [A] i.e on

Total: 36838.99

Add C.P & OH @15% except on [A] i.e on 37207.38 Cost for 33.31 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 417.85 Rs 417.85

Item Code: 6.12.1 Half brick masonry with bricks of class 75 in found & plinth in CM 1:3 Code 2602 03.008 2201 9999 0123 0124 0115 0101

Details of Cost for : 10.00 Sqm Unit Quantity

Description

MATERIALS : Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Cement mortar 1:3 (1 cement : 3 coarse sand) Carriage of bricks 1000 Sundries & Scaffolding L.S. LABOUR: Mason 1 st class Day Mason 2nd class Day Coolie Day Bhishti Day

Rate

565.00

2900.00

0.28 565.00 13.52

4145.53 233.60 1.49

0.45 0.45 1.55 0.70

301.00 273.00 247.00 260.00 Total: 3774.52

Add water charges @ 1% on

Add C.P & OH @15% on 3812.27 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 438.41 Rs 438.40

Item Code: 6.12.2 Half brick masonry with bricks of class 75 in found & plinth in CM 1:4 Code 2602 03.009 2201 9999 0123 0124 0115 0101

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS : Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Cement mortar 1:4 (1 cement : 4 coarse sand). Carriage of bricks 1000 Sundries & Scaffolding L.S. LABOUR: Mason 1 st class Day Mason 2nd class Day Coolie Day Bhishti Day

Rate

565.00

2900.00

0.28 565.00 13.52

3485.41 233.60 1.49

0.45 0.45 1.55 0.70

301.00 273.00 247.00 260.00 Total: 3589.68

Add water charges @ 1% on

Add C.P & OH @15% on 3625.58 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 416.94 Rs 416.95

Page 132 of 2298

Item Code: 6.13.1 H/B masonry in S/S upto floor 5 level CM 1:3 Code 2602 03.008 2201 9999 0123 0124 0115 0101 0115

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS : Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Cement mortar 1:3 (1 cement : 3 coarse sand) Carriage of bricks 1000 Sundries & Scaffolding L.S. LABOUR: Mason 1st class Day Mason 2nd class Day Coolie Day Bhishti Day Extra labour for lifting materials: Coolie Day

Rate

565.00

2900.00

0.28 565.00 13.52

4145.53 233.60 1.49

0.60 0.60 2.00 0.70

301.00 273.00 247.00 260.00

1.29

247.00 Total: 4290.40

Add water charges @ 1% on

Add C.P & OH @15% on 4333.30 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 498.33 Rs 498.35

Item Code: 6.13.2 H/B masonry in S/S upto floor 5 level CM 1:4 Code 2602 03.009 2201 9999 0123 0124 0115 0101 0115

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS : Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Cement mortar 1:4 (1 cement : 4 coarse sand). Carriage of bricks 1000 Sundries & Scaffolding L.S. LABOUR: Mason 1st class Day Mason 2nd class Day Coolie Day Bhishti Day Extra labour for lifting materials: Coolie Day

Rate

565.00

2900.00

0.28 565.00 13.52

3485.41 233.60 1.49

0.60 0.60 2.00 0.70

301.00 273.00 247.00 260.00

1.29

247.00 Total: 4105.56

Add water charges @ 1% on

Add C.P & OH @15% on 4146.62 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 476.86 Rs 476.85

Item Code: 6.14 Extra for H/B work in SS above floor 5 level Code

DSR-12

Description

Details of Cost for : 59.83 Sqm Unit Quantity

Rate

Page 133 of 2298

0037 1235

Details of cost for 59.83 sqm per four floors Mobile crane. Fuel consumption per hour = 8 litre. Diesel oil

per d

0.125

6500.00

litre

8.00

41.29 Total: 1142.82

Add water charges @ 1% on

Add C.P & OH @15% on 1154.25 Cost for 59.83 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 22.19 Rs 22.20

Item Code: 6.15 Extra for provdng -placing 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry .... Details of Cost for : 10.00 Sqm Code Description Unit Quantity (a) 6mm dia. M.S. bars (round) 2 Nos. @ 30 meter/10sqm. = 60 metre @ 0.22kg/m =13.2kg 1002 2205 9999

MS round bars 12mm dia and below Carraige of Steel Sundries

quint tonne L.S.

0.132 0.0132 1.82

Add water charges @ 1% on

Rate

4100.00 77.87 1.49 Total: 544.94

Add C.P & OH @15% on 550.39 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 63.30 Rs 63.30

Item Code: 6.16.1 Tile brick masonry with tile bricks of class 100 in found & plinth CM 1:4 Code 1984 03.009 2207 9999 0123 0124 0115 0101

Description MATERIALS : Common burnt clay FPS brick tile class 10 Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item no. 3.9) Carriage or brick tiles Sundries LABOUR: Mason 1st class Mason 2nd class Coolie Bhishti

Details of Cost for : 1.00 Cum Unit Quantity

Rate

1000

777.00 0.40

3100.00 3485.41

1000 L.S.

777.00 4.55

140.16 1.49

0.70 0.70 1.54 0.20

301.00 273.00 247.00 260.00 Total: 4752.72

Day Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 4800.25 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5520.29 Rs 5520.30

Item Code: 6.16.2

DSR-12

Page 134 of 2298

Tile brick masonry with tile bricks of class 100 in found & plinth CM 1:6 Code 1984 03.011 2207 9999 0123 0124 0115 0101

Description MATERIALS : Common burnt clay FPS brick tile class 10 Cement mortar 1:6 (1 cement : 6 coarse sand). Carriage or brick tiles Sundries LABOUR: Mason 1st class Mason 2nd class Coolie Bhishti

Details of Cost for : 1.00 Cum Unit Quantity 1000 1000 L.S. Day Day Day Day

Rate

777.00 0.40 777.00 4.55

3100.00 2825.29 140.16 1.49

0.70 0.70 1.54 0.20

301.00 273.00 247.00 260.00 Total: 4488.68

Add water charges @ 1% on

Add C.P & OH @15% on 4533.57 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5213.61 Rs 5213.60

Item Code: 6.17 Tile brick masonry with machine moulded tile bricks designation 125 in found & plinth in CM 1:6 Details of Cost for : 1.00 Cum Code Description Unit Quantity Details of cost for 1 cum. MATERIALS 7904 Machine moulded common burnt clay tile bricks of class 1000 777.00 designation 12.5 designation 125 2207 Carriage of Brick tiles 1000 777.00 03.011 Cement mortar 1:6 (1 cement : 6 coarse sand). 0.40 (Rates as per item no. 3.11) 9999 Sundries L.S. 4.55 LABOUR: 0123 Mason 1st Class Day 0.70 0124 Mason Ilnd Class Day 0.70 0115 Coolie Day 1.54 0101 Bhishti Day 0.20 Add water charges @ 1% on

Rate

3700.00

140.16 2825.29 1.49 301.00 273.00 247.00 260.00 Total: 4954.88

Add C.P & OH @15% on 5004.43 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5755.09 Rs 5755.10

Item Code: 6.18 Tile brick masonry with machine moulded tile bricks designation 125 in S/S upto floor 5 level in CM 1:6 Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 1984 Common burnt clay FPS brick tile class 10 1000 777.00 2207 Carriage of Brick tiles 1000 777.00 03.011 Cement mortar 1:6 (1 cement : 6 coarse sand). 0.40 sand).(Rate as item no. 3.11)

DSR-12

Rate 3100.00 140.16 2825.29

Page 135 of 2298

9999 0123 0124 0115 0101 0115 9999

Sundries LABOUR: Mason 1st Class Mason Ilnd Class Coolie Bhishti Extra labour for lifting of materials Coolie Cost of scaffolding

L.S.

4.55

1.49

Day Day Day Day

0.90 0.90 1.80 0.20

301.00 273.00 247.00 260.00

Day L.S.

1.13 33.80

247.00 1.49 Total: 4997.17

Add water charges @ 1% on

Add C.P & OH @15% on 5047.14 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5804.21 Rs 5804.20

Item Code: 6.20 Tile brick masonry with tile bricks of class 100 in plain arch work in SS in CM 1:4 Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS 1984 Common burnt clay FPS brick tile class 10 1000 777.00 2207 Carriage of Brick tiles 1000 777.00 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.35 9999 Sundries L.S. 5.46 Centering and shuttering 05.009.09 C/S i/c strutting, propping etc at all level Arches, domes etc 2.25

9999 0123 0124 0115 0101

0115

Rate as per item no. 5.9.9 Scaffolding LABOUR: Mason 1st Class Mason Ilnd Class Coolie Bhishti Extra labour for lifting material (Above floor two level and upto floor five level) Coolie

Rate 3100.00 140.16 3485.41 1.49 866.70

L.S.

18.85

1.49

Day Day Day Day

0.79 0.79 3.21 0.20

301.00 273.00 247.00 260.00

Day

1.13

247.00 Total: 5351.16

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 5404.67 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 8165.45 Rs 8165.45

Item Code: 6.21 Tile brick masonry with tile bricks of class 100 in gauged arch work in SS CM 1:4 Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS 1984 Common burnt clay FPS brick tile class 10 1000 791.00 2207 Carriage of tiles Brick 1000 791.00 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.35

DSR-12

Rate 3100.00 140.16 3485.41

Page 136 of 2298

9999

Sundries and shuttering Centering and shuttering Area same as in item no 6.9 C/S i/c strutting, propping etc at all level Arches, domes etc

L.S.

0123 0124 0115 0101

Scaffolding LABOUR: Mason 1st Class Mason Ilnd Class Coolie Bhishti Extra labour for lifting material (Above floor two level and upto floor five level)

0115

Coolie

05.009.09 9999

5.46

1.49

2.25

866.70

L.S.

18.85

1.49

Day Day Day Day

1.50 1.50 5.33 0.20

301.00 273.00 247.00 260.00

Day

1.13

247.00 Total: 6327.71

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 6390.99 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 9299.72 Rs 9299.70

Item Code: 6.22 Tile brick masonry work 5 cm thick with tile brick of class 100 in CM 1:3 in SS Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS: 1984 Common burnt clay FPS brick tile class 10 1000 377.00 2207 Carriage of tile bricks 1000 377.00 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.15 9999 Sundries and scaffolding L.S. 8.06 LABOUR: 0123 Mason 1st class Day 0.94 0124 Mason 2nd class Day 0.94 0115 Coolie Day 1.88 0101 Bhishti Day 0.33 Extra labour for lifting material (Above floor two level and upto floor five level) 0115

Coolie

Day

1.29

Add water charges @ 1% on

Rate 3100.00 140.16 4145.53 1.49 301.00 273.00 247.00 260.00

247.00 Total: 3263.73

Add C.P & OH @15% on 3296.37 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 379.08 Rs 379.10

Item Code: 6.23 Honey-comb B/W 10/11.2 cm with in CM 1:4 Code

DSR-12

Description Details of cost for 1sqm. of Honey comb brick worksMATERIALS:

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

Page 137 of 2298

(1) Brick work, with bricks of class designation 75, in cement mortar 1:4 (1 Cement: 4 Coarse sand) in superstructure 06.004.01

9999

Brick work with FPS bricks of class designation 75 in super structure above plinth level u Rate as per item no 6.4.1 (A) (2) Extra for delay due to fine work L.S.

0.069

4067.84

20.67

1.49 Total: 30.80

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 31.11 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 316.46 Rs 316.45

Item Code: 6.24 Extra for laying BW in or under water and/or liquid mud i/c cost of pumping Code

0011 0114

Description Details of cost for depth of water 0.30m. Quantity of concrete = 14 cum. Pumping hours = 3 hrs. or 0.375 days. Hire charge of pump set of capacity 4000 ltr/hr. Beldar for cleaning slush

Details of Cost for : 4.20 Cum Unit Quantity

Day Day

0.375 4.00

Add water charges @ 1% on

Rate

500.00 247.00 Total: 1175.50

Add C.P & OH @15% on 1187.26 Cost for 4.20 Cum Rate per One Cum: Rate as per DSR-12:

Rs 325.08 Rs 325.10

Item Code: 6.25 Extra for BW in or under foul position. Code 0123 0124 0114 0115

Description Extra labour due to slow progressMason 1st class Mason 2nd class Beldar Coolie

Details of Cost for : 1.00 Cum Unit Quantity Day Day Day Day

0.02 0.02 0.25 0.15

Add water charges @ 1% on

Rate 301.00 273.00 247.00 247.00 Total: 110.28

Add C.P & OH @15% on 111.38 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 128.09 Rs 128.10

Item Code: 6.26.1 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - From ground level upto plinth level Details of Cost for : 1.00 Cum

DSR-12

Page 138 of 2298

Code

2201 03.011 9999

Description MATERIALS: Common burnt clay F.P.S. (non modular) bricks class designation7.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

0114 0123 0124 0115 0101

LABOUR: Beldar (For selection of bricks) Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti

2602

Unit

Quantity

Rate

1000

494.00

2900.00

1000 Cum L.S.

494.00 0.25 16.38

233.60 2825.29 1.49

0.50 0.35 0.35 1.07 0.20

247.00 301.00 273.00 247.00 260.00 Total: 2919.42

Day Day Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 2948.61 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3390.90 Rs 3390.90

Item Code: 6.26.2 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level

Code 2602 2201 03.011 9999

0114 0123 0124 0115 0101

0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Common burnt clay F.P.S. (non modular) bricks class designation7.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

Rate

1000

494.00

2900.00

1000 Cum L.S.

494.00 0.25 16.38

233.60 2825.29 1.49

0.50 0.46 0.46 1.60 0.20

247.00 301.00 273.00 247.00 260.00

1.13 22.36

247.00 1.49 Total: 3425.90

LABOUR: Beldar (For selection of bricks) Day Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (avove floor two level and upto floor five level) Coolie Day Sundries L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 3460.16 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3979.18 Rs 3979.20

Item Code: 6.27.1

DSR-12

Page 139 of 2298

Brick work with common burnt clay selected modular bricks of class designation 7.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - From ground level upto plinth level

Code

Details of Cost for : 1.00 Cum Unit Quantity

Description

7900 2201 03.011 9999

MATERIALS: Common burnt Modular bricks of class designation 7.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

1000 1000 Cum L.S.

0123 0124 0115 0101

LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti

Day Day Day Day

Rate

487.00 487.00 0.22 16.38

3150.00 233.60 2825.29 1.49

0.33 0.33 1.00 0.18

301.00 273.00 247.00 260.00 Total: 2777.00

Add water charges @ 1% on

Add C.P & OH @15% on 2804.77 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3225.49 Rs 3225.50

Item Code: 6.27.2 Brick work with common burnt clay selected Modular bricks of class designation 7.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level

Code

Details of Cost for : 1.00 Cum Unit Quantity

Description

Rate

7900

MATERIALS: Common burnt clay Modular bricks of class designation 7.5

1000

487.00

3150.00

2201 03.011 9999

Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

1000 Cum L.S.

487.00 0.22 16.38

233.60 2825.29 1.49

0.44 0.44 1.43 0.18

301.00 273.00 247.00 260.00

1.13 22.36

247.00 1.49 Total: 3258.78

0123 0124 0115 0101

0115 9999

LABOUR: Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (avove floor two level and upto floor five level) Coolie Day Sundries L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 3291.37 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3785.08 Rs 3785.10

Item Code: 6.28.1

DSR-12

Page 140 of 2298

Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - From ground level upto plinth level

Code

Details of Cost for : 1.00 Cum Unit Quantity

Description

Rate

1986

MATERIALS: Common burnt clay modular bricks class designation 12.5

1000

487.00

3600.00

2201 03.011 9999

Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

1000 Cum L.S.

487.00 0.22 16.38

233.60 2825.29 1.49

0123 0124 0115 0101

LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti

Day Day Day Day

0.33 0.33 1.00 0.18

301.00 273.00 247.00 260.00 Total: 2996.15

Add water charges @ 1% on

Add C.P & OH @15% on 3026.11 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3480.03 Rs 3480.05

Item Code: 6.28.2 Brick work with common burnt clay machine moulded Modular bricks of class designation 12.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level.

Code

Details of Cost for : 1.00 Cum Unit Quantity

Description

Rate

1986

MATERIALS: Common burnt clay modular bricks class designation 12.5

1000

487.00

3600.00

2201 03.011 9999

Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

1000 Cum L.S.

487.00 0.22 16.38

233.60 2825.29 1.49

0.44 0.44 1.43 0.18

301.00 273.00 247.00 260.00

1.13 22.36

247.00 1.49 Total: 3477.93

0123 0124 0115 0101

0115 9999

LABOUR: Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (avove floor two level and upto floor five level) Coolie Day Sundries L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 3512.71 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4039.62 Rs 4039.60

Item Code: 6.29.1

DSR-12

Page 141 of 2298

Brick work with common burnt clay machine moulded F.P.S non-modular bricks of class designation 12.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - From G.L upto plinth level

Code

Details of Cost for : 1.00 Cum Unit Quantity

Description

2201 03.011 9999

MATERIALS: Machine moulded common burnt clay F.P.S. (non modular) bricks of class designation 12.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

0123 0124 0115 0101

LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti

7903

Rate

1000

494.00

3550.00

1000 Cum L.S.

494.00 0.25 16.38

233.60 2825.29 1.49

0.36 0.36 1.37 0.20

301.00 273.00 247.00 260.00 Total: 3196.86

Day Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 3228.83 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3713.15 Rs 3713.15

Item Code: 6.29.2 Brick work with common burnt clay machine moulded FPS Non-Modular bricks of class designation 12.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level.

Code 7903 2201 03.011 9999

0123 0124 0115 0101

0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Machine moulded common burnt clay F.P.S. (non modular) bricks of class designation 12.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

Rate

1000

494.00

3550.00

1000 Cum L.S.

494.00 0.25 16.38

233.60 2825.29 1.49

0.44 0.44 1.80 0.20

301.00 273.00 247.00 260.00

1.13 22.36

247.00 1.49 Total: 3661.42

LABOUR: Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (avove floor two level and upto floor five level) Coolie Day Sundries L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 3698.03 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4252.73 Rs 4252.75

Item Code: 6.30.1

DSR-12

Page 142 of 2298

Brick work with common burnt clay machine moulded perforated F.P.S non-modular bricks of class designation 12.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - From G.L upto plinth level

Code

Details of Cost for : 1.00 Cum Unit Quantity

Description

2201 03.011 9999

MATERIALS: Machine moulded perforated FPS (non modular) bricks of class designation 12.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

0123 0124 0115 0101

LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti

7901

Rate

1000

494.00

4150.00

1000 Cum L.S.

494.00 0.25 16.38

233.60 2825.29 1.49

0.36 0.36 1.37 0.20

301.00 273.00 247.00 260.00 Total: 3493.26

Day Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 3528.19 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4057.42 Rs 4057.40

Item Code: 6.30.2 Brick work with common burnt clay machine moulded perforated FPS Non-Modular bricks of class 12.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level.

Code 7901 2201 03.011 9999

0123 0124 0115 0101

0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Machine moulded perforated FPS (non modular) bricks of class designation 12.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

Rate

1000

494.00

4150.00

1000 Cum L.S.

494.00 0.25 16.38

233.60 2825.29 1.49

0.47 0.47 1.80 0.20

301.00 273.00 247.00 260.00

1.13 22.36

247.00 1.49 Total: 3975.04

LABOUR: Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (avove floor two level and upto floor five level) Coolie Day Sundries L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 4014.79 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4617.01 Rs 4617.00

Item Code: 6.31.1

DSR-12

Page 143 of 2298

Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - From G.L upto plinth level

Code

Details of Cost for : 1.00 Cum Unit Quantity

Description

2201 03.011 9999

MATERIALS: Machine moulded modular perforated bricks of class designation 12.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

0123 0124 0115 0101

LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti

7902

Rate

1000

487.00

3800.00

1000 Cum L.S.

487.00 0.22 16.38

233.60 2825.29 1.49

0.33 0.33 1.00 0.18

301.00 273.00 247.00 260.00 Total: 3093.55

Day Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 3124.49 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3593.16 Rs 3593.15

Item Code: 6.31.2 Brick work with common burnt clay machine moulded perforated Modular bricks of class 12.5 in exposed brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level.

Code 7902 2201 03.011 9999

0123 0124 0115 0101

0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Machine moulded modular perforated bricks of class designation 12.5 Carraige of Bricks Cement mortar 1:6 (1 cement : 6 coarse sand). Sundries including steel / wooden strips for making grooves

Rate

1000

487.00

3800.00

1000 Cum L.S.

487.00 0.22 16.38

233.60 2825.29 1.49

0.44 0.44 1.43 0.18

301.00 273.00 247.00 260.00

1.13 22.36

247.00 1.49 Total: 3575.33

LABOUR: Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (avove floor two level and upto floor five level) Coolie Day Sundries L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 3611.08 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4152.74 Rs 4152.75

Item Code: 6.32.1

DSR-12

Page 144 of 2298

B/W with clay flyash with bricks in S/S above PL upto floor 5 level in CM 1:4 Code 7008 03.009 2201 9999 0123 0124 0115 0101 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description

MATERIALS : F.P.S (non modular) Clay flyash bricks of class designation 7.5 1000

Rate

494.00

3000.00

Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item no 3.11) Carriage of bricks ‘ Sundries LABOUR: Mason 1st class Mason 2nd class Coolie Bhishti Scaffolding Extra labour element required for lifting of materials above floor two level upto floor V level (0.75 x 1.5 = 1.13)

Cum

0.25

3485.41

1000 L.S.

494.00 2.75

233.60 1.49

Day Day Day Day L.S.

0.47 0.47 1.80 0.20 8.97

301.00 273.00 247.00 260.00 1.49

Coolie

Day

1.13

247.00 Total: 3531.71

Add water charges @ 1% on

Add C.P & OH @15% on 3567.03 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4102.08 Rs 4102.05

Item Code: 6.32.2 Brick work with clay flyash F.P.S. bricks - cls design. 75 in superstructure above plinth level up to floor 5 level in : CM 1:6 (1 cement : 6 coarse sand) Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate MATERIALS : 7008 F.P.S (non modular) Clay flyash bricks of class designation 7.5 1000 494.00 3000.00 03.011 2201 9999 0123 0124 0115 0101 9999

0115

Cement mortar 1:6 (1 cement : 6 coarse sand). (Rate as per item no 3.11) Carriage of bricks 1000 Sundries L.S. LABOUR: Mason 1st class Day Mason 2nd class Day Coolie Day Bhishti Day Scaffolding L.S. Extra labour element required for lifting of materials above floor two level upto floor V level (0.75x1.5= 1.13) Coolie Day

0.25

2825.29

494.00 2.73

233.60 1.49

0.47 0.47 1.80 0.20 8.97

301.00 273.00 247.00 260.00 1.49

1.13

247.00 Total: 3366.65

Add water charges @ 1% on

Add C.P & OH @15% on 3400.32 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 3910.37 Rs 3910.35

Page 145 of 2298

Item Code: 6.34.1 B/W with fly ash lime bricks of class 100 in in SS above PL to floor 5 level in CM 1:4 Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS: 7737 Fly ash lime bricks (FALG bricks) conforming to IS 12894 1000 487.00 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.22 (Rate as per Item No. 3.9) 2201 Carriage of bricks’ 1000 487.00 9999 Sundries L.S. 2.73 LABOUR: 0123 Mason 1st class Day 0.47 0124 Mason 2nd class Day 0.47 0115 Coolie Day 1.80 0101 Bhishti Day 0.20 9999 Scaffolding L.S. 22.36 Extra labour element required for lifting of materials above floor two level upto floor V level (0.75x1.5 =1.13) 0115 Coolie Day 1.13 Add water charges @ 1% on

Rate 3300.00 3485.41 233.60 1.49 301.00 273.00 247.00 260.00 1.49

247.00 Total: 3570.53

Add C.P & OH @15% on 3606.24 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4147.18 Rs 4147.20

Item Code: 6.34.2 B.W with modular fly ash lime bricks CLS desg 100 in super structure above plinth up to floor V level in : CM 1:6 -Coarse sand

Code 7737 03.011 2201 9999 0123 0124 0115 0101 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS : Fly ash lime bricks (FALG bricks) conforming to IS 12894 Cement mortar 1:6 (1 cement : 6 coarse sand). Rate as per Item No. 3.11 Carriage of brick’s Sundries LABOUR: Mason 1st class Mason 2nd class Coolie Bhishti Scaffolding Extra labour element required for lifting of materials above floor two level upto floor V level Coolie (0.75x1.5= 1.13)

Rate

1000

487.00 0.22

3300.00 2825.29

1000 L.S.

487.00 2.73

233.60 1.49

Day Day Day Day L.S.

0.47 0.47 1.80 0.20 22.36

301.00 273.00 247.00 260.00 1.49

Day

1.13

247.00 Total: 3425.30

Add water charges @ 1% on

Add C.P & OH @15% on 3459.55 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 3978.48 Rs 3978.50

Page 146 of 2298

Item Code: 6.35.1 B/W with calcium silicate bricks machine moulded of class designation 100 in in SS above PL to floor 5 level in CM 1:4

Code 7738 03.009 2201 9999 0123 0124 0115 0101 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS : Calcium silicate bricks machine moulded conforming to I.S 4139 Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item No 3.9) Carriage of bricks Sundries LABOUR: Mason 1st class Mason 2nd class Coolie Bhishti Scaffolding Extra labour element required for lifting of materials above floor two level upto floor V level Coolie (0.7 x 1.5 = 1.13)

1000

Rate

487.00

3600.00

0.22

3485.41

1000 L.S.

487.00 2.73

233.60 1.49

Day Day Day Day L.S.

0.47 0.47 1.80 0.20 22.36

301.00 273.00 247.00 260.00 1.49

Day

1.13

247.00 Total: 3716.63

Add water charges @ 1% on

Add C.P & OH @15% on 3753.80 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4316.87 Rs 4316.85

Item Code: 6.35.2 B/W with calcium silicate bricks machine moulded of class designation 100 in in SS above PL to floor 5 level in CM 1:6

Code 7738 03.011 2201 9999 0123 0124 0115 0101 9999

0115

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Calcium Silicate Bricks machine moulded confirming to I.S. 4139 Cement mortar 1:6 (1 cement : 6 coarse sand). Carraige of Bricks Sundries LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Coolie Bhisti Scaffolding Extra labour element required for lifting of materials above floor two level and up to floor V level Coolie (0.75x1.5=1.13)

Rate

1000

487.00

3600.00

Cum 1000 L.S.

0.22 487.00 2.73

2825.29 233.60 1.49

Day Day Day Day L.S.

0.47 0.47 1.80 0.20 22.36

301.00 273.00 247.00 260.00 1.49

Day

1.13

247.00 Total: 3571.40

Add water charges @ 1% on

Add C.P & OH @15% on 3607.11 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 4148.18 Rs 4148.20

Page 147 of 2298

Item Code: 6.36.1 B/W extruded burnt flyash clay sewer bricks in found and plinth CM 1:4 Code 7736 03.009 2201 9999 0123 0124 0115 0101

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS : Extruded burnt flyash clay sewer bricks Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item No. 3.9) Carriage of bricks Sundries LABOUR: Mason 1st class Mason 2nd class Coolie Bhishti

Rate

1000

487.00 0.22

3900.00 3485.41

1000 L.S.

487.00 2.73

233.60 1.49

0.33 0.33 1.00 0.18

301.00 273.00 247.00 260.00 Total: 3267.14

Day Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 3299.81 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3794.78 Rs 3794.80

Item Code: 6.37 B/W with modular extruded burnt fly ash clay sewer in arches in found and plinth in CM 1:3 Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 7736 Extruded burnt flyash clay sewer bricks 1000 487.00 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) 0.25 (Rate as per item No. 3.3) 2201 Carriage of bricks 1000 487.00 9999 Sundries L.S. 2.73 Centering and shuttering 05.009.09 C/S i/c strutting, propping etc at all level Arches, domes etc 2.25

0123 0124 0115 0101

LABOUR: Mason 1st class Mason 2nd class Coolie Bhishti

Day Day Day Day

0.42 0.42 1.86 0.20

Add water charges @ 1% except on [A] i.e on

Rate 3900.00 3631.93 233.60 1.49 866.70

301.00 273.00 247.00 260.00 Total: 3677.61

Add C.P & OH @15% except on [A] i.e on 3714.39 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6221.63 Rs 6221.65

Item Code: 6.38 P/L AAC blocks masonry with 100 mm AAC blocks in S/S above PL upto floor 5 level in CM 1:4 Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 8655 Autoclaved aerated cement (AAC) blocks. cum 1.00

DSR-12

Rate 2025.00

Page 148 of 2298

03.009 2208 9999 0123 0124 0115 0101 05.022.01

Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per Item No. 3.9) Carriage of AAC blocks Sundries LABOUR: Mason 1st Class Mason Ilnd Class Coolie Bhishti Reinforcement bars Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi

0.15

3485.41

cum L.S.

1.00 2.73

87.60 1.49

Day Day Day Day

0.36 0.36 1.37 0.20

301.00 273.00 247.00 260.00

13.20

56.77

Add water charges @ 1% except on [A] i.e on

Total: 3236.51

Add C.P & OH @15% except on [A] i.e on 3268.88 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4508.57 Rs 4508.30

Item Code: 6.40 P/L Gypsum panel partitions 100 mm thick with water proof in SS above PL upto floor 5 level Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIAL 8656 Gypsum panel 666 X 500 X 100 mm size. sqm 10.00 8657 Bonding plaster for Gypsum panel. kg 25.00 9999 Sundries & scaffolding L.S. 13.52 LABOUR 0123 Mason (brick layer) 1st class Day 0.50 0114 Beldar Day 1.00 Add water charges @ 1% on

Rate 455.00 53.00 1.49 301.00 247.00 Total: 6292.64

Add C.P & OH @15% on 6355.57 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 730.89 Rs 730.90

Item Code: 6.41 Extra for Gypsum panel partitions in SS above floor 5 level Code

0115

Details of Cost for : 10.00 Sqm Description Unit Quantity Details of cost for 10 sqm. per four floor Extra labour element for lifting of materials above floor V level. Coolie Day 1.73 Add water charges @ 1% on

Rate

247.00 Total: 427.31

Add C.P & OH @15% on 431.58 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 49.63 Rs 49.65

Page 149 of 2298

Item Code: 6.42.1 B/W with mechanized autoclave flyash lime bricks class designation 100 in SS above PL level upto floor 5 level in CM 1:4

Code 8658 03.009 2201 9999 0123 0124 0115 0101

0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS Mechanised Autoclaved flyash lime bricks. Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item no 3.9) Carriage of Bricks Sundries LABOUR: Mason 1st class Mason 2nd class Coolie Bhisti Extra labour for lifting material (Above floor two level and upto floor five level) Coolie Sundries

Rate

1000

494.00 0.25

4300.00 3485.41

1000 L.S.

494.00 2.73

233.60 1.49

Day Day Day Day

0.47 0.47 1.80 0.20

301.00 273.00 247.00 260.00

Day L.S.

1.13 22.36

247.00 1.49 Total: 4193.83

Add water charges @ 1% on

Add C.P & OH @15% on 4235.77 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4871.14 Rs 4871.10

Item Code: 6.42.2 B/W with mechanized autoclave flyash lime bricks class designation 100 in SS above PL level upto floor 5 level in CM 1:6

Code 8658 03.011 2201 9999 0123 0124 0115 0101

0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS Mechanised Autoclaved flyash lime bricks. Cement mortar 1:6 (1 cement : 6 coarse sand). (Rate as per item no 3.11) Carriage of Bricks Sundries LABOUR: Mason 1st class Mason 2nd class Coolie Bhisti Extra labour for lifting material (Above floor two level and upto floor five level) Coolie Sundries

Rate

1000

494.00 0.25

4300.00 2825.29

1000 L.S.

494.00 2.73

233.60 1.49

Day Day Day Day

0.47 0.47 1.80 0.20

301.00 273.00 247.00 260.00

Day L.S.

1.13 22.36

247.00 1.49 Total: 4028.80

Add water charges @ 1% on

Add C.P & OH @15% on 4069.09 Cost for 1.00 Cum Rate per One Cum:

DSR-12

Rs 4679.45

Page 150 of 2298

Rate as per DSR-12:

Rs 4679.45

Item Code: 6.44 Brick edging 7cm wide 11.4cm deep to plinth protection Code 9999

2602 2201 03.004 0155 0114 0101 9999

Description Details of cost for 10m length Excavation and disposal of surplus earth 2nd class bricks = 42 nos. + Add wastage @ 10% = 4.2 nos. = 46.2 nos. Say 46.00 nos. Common burnt clay F.P.S (non modular) Bricks of class designation 7.5 Carriage of bricks Cement mortar 1:4 (1 cement : 4 fine sand) LABOUR Mason Beldar Bhisti Sundries

Details of Cost for : 10.00 m Unit Quantity

Rate

L.S.

2.73

1.49

1000

46.00

2900.00

1000

46.00 0.0036

233.60 2971.81

0.10 0.10 0.03 2.73

287.00 247.00 260.00 1.49 Total: 224.19

Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 226.43 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 26.04 Rs 26.05

Item Code: 6.45.1 Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level. - CM 1 : 3 (1 cement : 3 coarse sand)

Code 7737 2201 03.008 9999 0123 0124 0115 0101

0115

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894- 1000 1989 Carraige of Bricks 1000 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum Sundries & Scaffolding L.S. LABOUR: Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (above floor two level upto floor five level) Coolie Day

Rate

565.00

3300.00

565.00 0.28 13.52

233.60 4145.53 1.49

0.60 0.60 2.00 0.70

301.00 273.00 247.00 260.00

1.29

247.00 Total: 4516.40

Add water charges @ 1% on

Add C.P & OH @15% on 4561.56 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 524.58 Rs 524.60

Page 151 of 2298

Item Code: 6.45.2 Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level. - CM 1 : 4 (1 cement : 4 coarse sand)

Code 7737 2201 03.009 9999 0123 0124 0115 0101

0115

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894- 1000 1989 Carraige of Bricks 1000 Cement mortar 1:4 (1 cement : 4 coarse sand). Cum Sundries & Scaffolding L.S. LABOUR: Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (above floor two level upto floor five level) Coolie Day

Rate

565.00

3300.00

565.00 0.28 13.52

233.60 3485.41 1.49

0.60 0.60 2.00 0.70

301.00 273.00 247.00 260.00

1.29

247.00 Total: 4331.56

Add water charges @ 1% on

Add C.P & OH @15% on 4374.88 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 503.11 Rs 503.10

Item Code: 6.46.1 Half brick masonry with non modular mechanised auto claved fly ash sand lime bricks class designation 10, in SS above plinth and upt floor V level.. - CM 1 : 3 (1 cement : 3 coarse sand)

Code 8658 2201 03.008 9999 0123 0124 0115 0101

0115

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Mechanised Autoclaved fly ash sand lime non modular bricks. 1000 Carraige of Bricks 1000 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum Sundries & Scaffolding L.S. LABOUR: Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (above floor two level upto floor five level) Coolie Day

Rate

565.00

4300.00

565.00 0.28 13.52

233.60 4145.53 1.49

0.60 0.60 2.00 0.70

301.00 273.00 247.00 260.00

1.29

247.00 Total: 5081.40

Add water charges @ 1% on

Add C.P & OH @15% on 5132.21 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 590.20 Rs 590.20

Page 152 of 2298

Item Code: 6.46.2 Half brick masonry with non modular mechanised auto claved fly ash sand lime bricks class designation 10, , in SS above plinth and upt floor V level. - CM 1 : 4 (1 cement : 4 coarse sand)

Code 8658 2201 03.009 9999 0123 0124 0115 0101

0115

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Mechanised Autoclaved fly ash sand lime non modular bricks. 1000 Carraige of Bricks 1000 Cement mortar 1:4 (1 cement : 4 coarse sand). Cum Sundries & Scaffolding L.S. LABOUR: Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Coolie Day Bhisti Day Extra labour element required for lifting of material (above floor two level upto floor five level) Coolie Day

Rate

565.00

4300.00

565.00 0.28 13.52

233.60 3485.41 1.49

0.60 0.60 2.00 0.70

301.00 273.00 247.00 260.00

1.29

247.00 Total: 4896.56

Add water charges @ 1% on

Add C.P & OH @15% on 4945.53 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 568.74 Rs 568.75

Item Code: 7.1.1 RR masonry in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 1157 Stone at quarry cum 1.00 1154 Through and bond stones 7 nos. 100 N 7.00 Carriage of stone7.00x24cmx24cmx39cm = 0.16 cum. 2215 1 .OOcum. + 0.16 cum. = 1.16 cum. cum 1.16 03.011 Cement mortar 1:6 (1 cement : 6 coarse sand). 0.33 LABOUR Rate as per item no. 3.11 0125 Mason 2nd class Day 1.07 0114 Beldar Day 1.07 0115 Coolie Day 0.71 0101 Bhishti Day 0.09 9999 Cement concrete 1:6:12 L.S. 45.76 9999 Sundries L.S. 4.42 Add water charges @ 1% on

Rate 675.00 1100.00

103.06 2825.29

273.00 247.00 247.00 260.00 1.49 1.49 Total: 2633.84

Add C.P & OH @15% on 2660.18 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 3059.21 Rs 3059.20

Page 153 of 2298

Item Code: 7.2.1 RR masonry in superstructure above plinth level and upto floor five level, including leveling up with CC 1:6:12 at window sills, ceiling level and the like - Cement mortar 1:6 (1 cement : 6 coarse sand).

Code 1157 1154 2215

03.011 0125 0114 0115 0101 9999

0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description

MATERIALS: Stone for masonry work cum Through and bond stone 100 N Carraige of Soling stone & masonry stone cum Bond stone Qty : 7.00 x 24 cm x 24cm x 39 cm = 0.16 cum Total : 1.00 cum + 0.16 cum = 1.16 cum Cement mortar 1:6 (1 cement : 6 coarse sand). Cum LABOUR: Mason (for plain stone work) 2nd class) Day Beldar Day Coolie Day Bhisti Day Cement concrete 1:6:12 L.S. Extra labour required for lifting of material upto floor five level Coolie Day Sundries L.S.

Rate

1.00 7.00 1.16

675.00 1100.00 103.06

0.33

2825.29

1.34 1.45 0.71 0.09 56.55

273.00 247.00 247.00 260.00 1.49

1.13 15.21

247.00 1.49 Total: 3112.67

Add water charges @ 1% on

Add C.P & OH @15% on 3143.80 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3615.37 Rs 3615.35

Item Code: 7.4.1 Extra for RR masonry with hard stone in : Square or rectangular pillars. Code 0125 0115

Details of Cost for : 1.00 Cum Unit Quantity

Description LABOUR: Mason (2nd class) Coolie

Day Day

0.58 0.27

Add water charges @ 1% on

Rate 273.00 247.00 Total: 225.03

Add C.P & OH @15% on 227.28 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 261.37 Rs 261.35

Item Code: 7.4.2 Extra for RR masonry with hard stone in : Square or Circular pillars. Code 1157 2215

DSR-12

Description Extra stone Carriage. LABOUR: Labour for cutting and dressing stones-

Details of Cost for : 1.00 Cum Unit Quantity cum 0.29 cum 0.29

Rate 675.00 103.06

Page 154 of 2298

0125 0115

Mason (2nd class) Coolie

Day Day

1.42 0.35

Add water charges @ 1% on

273.00 247.00 Total: 699.75

Add C.P & OH @15% on 706.75 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 812.76 Rs 812.75

Item Code: 7.5 Extra for RR masonry in curved on plan for a mean radius not exceeding 6m. Details of Cost for : 1.00 Cum Code Description Unit Quantity 1157 Extra stone cum 0.10 2215 Carriage of stone cum 0.10 Labour for cutting and dressing stones0125 Mason (2nd class) Day 0.27 0115 Coolie Day 0.53 Add water charges @ 1% on

Rate 675.00 103.06 273.00 247.00 Total: 282.43

Add C.P & OH @15% on 285.25 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 328.04 Rs 328.05

Item Code: 7.6.1 CRS masonry (first sort) in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS03.011 Cement mortar 1:6 (1 cement : 6 coarse sand). 0.30 1157 Stone at quarry cum 1.21 1154 Through and bond stone 7 nos. 100 N 7.00 Carriage of stone 7.00x24cmx24cmx39cm = 0.16 cum. 2215 1.21+0.16=1.37 cum. cum 1.37 LABOUR: 0125 Mason (2nd class) Day 2.12 0114 Beldar Day 1.24 0115 Coolie Day 0.71 0101 Bhisti Day 0.09 9999 Sundries L.S. 13.52 Add water charges @ 1% on

Rate 2825.29 675.00 1100.00

103.06 273.00 247.00 247.00 260.00 1.49 Total: 2986.48

Add C.P & OH @15% on 3016.34 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3468.79 Rs 3468.80

Item Code: 7.7.1 CRS masonry (II sort) in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR-12

Page 155 of 2298

Code 03.011 1157 1154

2215 0125 0114 0115 0101 9999

Description MATERIALSCement mortar 1:6 (1 cement : 6 coarse sand). Stone at quarry Through and bond stones 7 nos. Carriage of stone 7.00x24cmx24cmx39cm = 0.16 cum. 1.10+0.16 cum = 1.26 cum. LABOUR: Mason (2nd class) Beldar Coolie Bhisti Sundries

Details of Cost for : 1.00 Cum Unit Quantity

Rate

cum 100 N

0.30 1.10 7.00

2825.29 675.00 1100.00

cum

1.26

103.06

Day Day Day Day L.S.

1.76 1.24 0.71 0.09 13.52

273.00 247.00 247.00 260.00 1.49 Total: 2802.62

Add water charges @ 1% on

Add C.P & OH @15% on 2830.65 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3255.25 Rs 3255.25

Item Code: 7.8.1 Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (first sort) , in cement mortar 1:6 (1 cement : 6 coarse sand)

Code 03.011 1157 1154 2215

0125 0114 0115 0101

0115 9999

Description

Details of Cost for : 1.00 Cum Unit Quantity

MATERIALS: Cement mortar 1:6 (1 cement : 6 coarse sand). Cum Stone for masonry work cum Through and bond stone 100 N Carraige of masonry stone cum Bodn stone Qty : 7 x 0.24 x 0.24 x 0.39 m = 0.16 cum Total Qty = 1.21 + 0.16 = 1.37 cum Mason (for plain stone work) 2nd class) Day Beldar Day Coolie Day Bhisti Day Extra labour required for lifting of material upto floor five level Coolie Day Scaffoldings, Sundries etc., L.S.

Rate

0.30 1.21 7.00 1.37

2825.29 675.00 1100.00 103.06

2.38 1.59 0.71 0.09

273.00 247.00 247.00 260.00

1.13 37.70

247.00 1.49 Total: 3459.05

Add water charges @ 1% on

Add C.P & OH @15% on 3493.64 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4017.69 Rs 4017.70

Item Code: 7.8.2

DSR-12

Page 156 of 2298

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 coarse sand)

Code 03.011 1157 1154 2215

0125 0114 0115 0101

0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description

MATERIALS: Cement mortar 1:6 (1 cement : 6 coarse sand). Cum Stone for masonry work cum Through and bond stone 100 N Carraige of masonry stone cum Bodn stone Qty : 7 x 0.24 x 0.24 x 0.39 m = 0.16 cum Total Qty = 1.1+ 0.16 = 1.26 cum Mason (for plain stone work) 2nd class) Day Beldar Day Coolie Day Bhisti Day Extra labour required for lifting of material upto floor five level Coolie Day Scaffoldings, Sundries etc., L.S.

Rate

0.30 1.10 7.00 1.26

2825.29 675.00 1100.00 103.06

2.02 1.59 0.71 0.09

273.00 247.00 247.00 260.00

1.13 37.70

247.00 1.49 Total: 3275.19

Add water charges @ 1% on

Add C.P & OH @15% on 3307.94 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 3804.13 Rs 3804.10

Item Code: 7.10.1 Extra for CR masonry with hard stone (first/second sort) in Square or rectangular pillars Details of Cost for : 1.00 Cum Code Description Unit Quantity LABOUR: 0125 Mason (2nd class) Day 0.67 0115 Coolie Day 0.27 Add water charges @ 1% on

Rate 273.00 247.00 Total: 249.60

Add C.P & OH @15% on 252.10 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 289.92 Rs 289.90

Item Code: 7.10.2 Extra for CR masonry with hard stone (first/second sort) in Circular pillars Code 1157 2215

0125 0115

DSR-12

Description MATERIALS: Extra stones. Carriage of stone LABOUR: Labour for cutting and dressing : Mason (2nd class) Coolie

Details of Cost for : 1.00 Cum Unit Quantity

Rate

cum cum

0.32 0.32

675.00 103.06

Day Day

1.67 0.35

273.00 247.00 Total:

Page 157 of 2298

Add water charges @ 1% on

791.34

Add C.P & OH @15% on 799.25 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 919.14 Rs 919.15

Item Code: 7.11 Extra for CR masonry with hard stone curved on plan for mean radius not exceeding 6 m Details of Cost for : 1.00 Cum Code Description Unit Quantity 1157 Extra stones cum 0.11 2215 Carriage of stone cum 0.11 Labour for cutting and dressing: 0125 Mason (2nd class) Day 0.33 0115 Coolie Day 0.53 Add water charges @ 1% on

Rate 675.00 103.06 273.00 247.00 Total: 306.59

Add C.P & OH @15% on 309.66 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 356.11 Rs 356.10

Item Code: 7.12.1.1 Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 One face dressed Red sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity MATERIALSRed sand stone Finished work = 10 cudm.+ Add wastage @ 33.3% = 3.33 cudm. 1160 Total = 13.33 cudm. 10 cu 13.33 Cost of stone 2216 Carriage of stone @ 2.30kg/cudm = tonne 0.031 13.33x2.30 = 30.659 kg = tonne 0.031 t. Extra labour for lifting of materials upto floor V level 0.01x1.50 = 0.015 0115 Coolie Day 0.015 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 0.088 0102 Black smith 1 st class Day 0.006 0114 Beldar Day 0.044 0115 Coolie Day 0.022 0100 Bandhani Day 0.044 Fixing charges LABOUR: 0125 Stone mason (plan work) 2nd class Day 0.044 0102 Blacksmith 1st class Day 0.006 0114 Beldar Day 0.022 0115 Coolie Day 0.022 0100 Bandhani Day 0.022 0101 Bhishti Day 0.022 9999 Scafolding L.S. 2.73 9999 Mortar for laying and pointing L.S. 8.06

DSR-12

Rate

60.00 77.87

247.00

273.00 301.00 247.00 247.00 260.00

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49

Page 158 of 2298

Add water charges @ 1% on

Total: 191.87

Add C.P & OH @15% on 193.79 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 22286.00 Rs 22285.00

Item Code: 7.12.1.2 Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 One face dressed White sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity MATERIALSWhite sand stone Finished work = 10 cudm.+ Add wastage @ 33.3% = 3.33 cudm. Total = 13.33 cudm. 1161 Cost of stone 10 cu 13.33 2216 Carriage of stone @ 2.30kg/cudm = tonne 0.031 13.33x2.30 = 30.659 kg = tonne 0.031 t. Extra labour for lifting of materials upto floor V level. 0.01x1.50=0.015 0115 Coolie Day 0.015 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 0.088 0102 Blacksmith 1st class Day 0.006 0114 Beldar Day 0.044 0115 Coolie Day 0.022 0100 Bandhani Day 0.044 Fixing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 0.044 0102 Blacksmith 1st class Day 0.006 0114 Beldar Day 0.022 0115 Coolie Day 0.022 0100 Bandhani Day 0.022 0101 Bhishti Day 0.022 9999 Scaffolding L.S. 2.73 9999 Mortar for laying and pointing L.S. 8.06 Add water charges @ 1% on

Rate

65.00 77.87

247.00

273.00 301.00 247.00 247.00 260.00

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49 Total: 198.54

Add C.P & OH @15% on 200.53 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 23061.00 Rs 23060.00

Item Code: 7.12.2.1 Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 Both face dressed Red sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity MATERIALSRed sand stone Finished work = 10 cudm.+

DSR-12

Rate

Page 159 of 2298

1160 2216

0115

0125 0102 0114 0115 0100

0125 0102 0114 0115 0100 0101 9999 9999

Add wastage @ 33.3% = 3.33 cudm. Total = 13.33 cudm. Cost of stone Carriage of stone @ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = tonne say 0.031 t. Extra labour for lifting of materials upto floor V level 0.01x1.50 = 0.015 Coolie Dressing charges LABOUR: Stone mason (plane work) 2nd class Blacksmith 1st class Beldar Coolie Bandhani Fixing charges LABOUR: Stone mason (plan work) 2nd class Blacksmith 1st class Beldar Coolie Bandhani Bhishti Scafolding Mortar for laying and pointing

10 cu

13.33

60.00

tonne

0.031

77.87

Day

0.015

247.00

Day Day Day Day Day

0.176 0.012 0.088 0.044 0.088

273.00 301.00 247.00 247.00 260.00

Day Day Day Day Day Day L.S. L.S.

0.044 0.006 0.022 0.022 0.022 0.022 2.73 8.06

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49 Total: 245.45

Add water charges @ 1% on

Add C.P & OH @15% on 247.90 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 28509.00 Rs 28507.00

Item Code: 7.12.2.2 Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 Both face dressed White sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity MATERIALSWhite sand stone Finished work = 10 cudm.+ Add wastage @ 33.3% = 3'.33 cudm. Total = 13.33 cudm. 1161 Cost of stone 10 cu 13.33 2216 Carriage of stone @ 2.30kg/cudm = tonne 0.031 13.33x2.30 = 30.659 kg = tonne say 0.031 t. Extra labour for lifting of material upto floor V level. 0.01x1.50 = 0.015 0115 Coolie Day 0.015 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 0.176 0102 Blacksmith 1st class Day 0.012 0114 Beldar Day 0.088 0115 Coolie Day 0.044 0100 Bandhani Day 0.088 Fixing charges

DSR-12

Rate

65.00 77.87

247.00

273.00 301.00 247.00 247.00 260.00

Page 160 of 2298

0125 0102 0114 0115 0100 0101 9999 9999

LABOUR: Stone mason (plane work) 2nd class Blacksmith 1st class Beldar Coolie Bandhani Bhishti Scaffolding Mortar for laying and pointing

Day Day Day Day Day Day L.S. L.S.

0.044 0.006 0.022 0.022 0.022 0.022 2.73 8.06

Add water charges @ 1% on

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49 Total: 252.12

Add C.P & OH @15% on 254.64 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 29284.00 Rs 29282.00

Item Code: 7.13.1.1 Stone work in plain ashlar in SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - One face dressed. - Red sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity Rate MATERIALS: 1160 Red sand stone block 10 cu 13.33 60.00 Finished work = 10 cudm + Add wastage @ 33.3% = 3.33 cudm Total = 13.33 cum 2216 Carraige of Stone blocks white & red sand stone & kota stone tonne 0.031 77.87 slab Qty : @ 2.30 kg/cudm = 13.33 x 2.20 = 30.659 kg or 0.031 t Dressing charges : LABOUR: 0125 Mason (for plain stone work) 2nd class) Day 0.088 273.00 0102 Blacksmith 1st class Day 0.006 301.00 0114 Beldar Day 0.044 247.00 0115 Coolie Day 0.022 247.00 0100 Bandhani Day 0.044 260.00 Fixing charges : 0125 Mason (for plain stone work) 2nd class) Day 0.044 273.00 0102 Blacksmith 1st class Day 0.006 301.00 0114 Beldar Day 0.022 247.00 0115 Coolie Day 0.022 247.00 0100 Bandhani Day 0.022 260.00 0101 Bhisti Day 0.022 260.00 9999 Scaffolding L.S. 2.73 1.49 9999 Mortar for laying and pointing L.S. 8.06 1.49 9999 Centring and shuttering L.S. 13.52 1.49 9999 Extra for using white cement L.S. 8.06 1.49 Extra labour for lifting of material upto floor five level (0.01 x 1.5 = 0.015) 0115 Coolie Day 0.015 247.00 Total: Add water charges @ 1% on 224.02 Add C.P & OH @15% on 226.26 Cost for 0.01 Cum

DSR-12

Page 161 of 2298

Rate per One Cum: Rate as per DSR-12:

Rs 26020.00 Rs 26021.00

Item Code: 7.13.1.2 Stone work in plain ashlar in SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - One face dressed. - White sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity Rate MATERIALS: 1161 White sand stone block 10 cu 13.33 65.00 Finished work = 10 cudm + Add wastage @ 33.3% = 3.33 cudm Total = 13.33 cum 2216 Carraige of Stone blocks white & red sand stone & kota stone tonne 0.031 77.87 slab Qty : @ 2.30 kg/cudm = 13.33 x 2.20 = 30.659 kg or 0.031 t Dressing charges : LABOUR: 0125 Mason (for plain stone work) 2nd class) Day 0.088 273.00 0102 Blacksmith 1st class Day 0.006 301.00 0114 Beldar Day 0.044 247.00 0115 Coolie Day 0.022 247.00 0100 Bandhani Day 0.044 260.00 Fixing charges : 0125 Mason (for plain stone work) 2nd class) Day 0.044 273.00 0102 Blacksmith 1st class Day 0.006 301.00 0114 Beldar Day 0.022 247.00 0115 Coolie Day 0.022 247.00 0100 Bandhani Day 0.022 260.00 0101 Bhisti Day 0.022 260.00 9999 Scaffolding L.S. 2.73 1.49 9999 Mortar for laying and pointing L.S. 8.06 1.49 9999 Centring and shuttering L.S. 13.52 1.49 9999 Extra for using white cement L.S. 8.06 1.49 Extra labour for lifting of material upto floor five level (0.01 x 1.5 = 0.015) 0115 Coolie Day 0.015 247.00 Total: Add water charges @ 1% on 230.69 Add C.P & OH @15% on 233.00 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 26795.00 Rs 26795.00

Item Code: 7.13.2.1 Stone work in plain ashlar in ARCHES SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - One face dressed. - Red sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity Rate MATERIALS: 1160 Red sand stone block 10 cu 13.33 60.00 Finished work = 10 cudm + Add wastage @ 33.3% = 3.33 cudm Total = 13.33 cum

DSR-12

Page 162 of 2298

2216

0125 0102 0114 0115 0100 0125 0102 0114 0115 0100 0101 9999 9999 9999 9999

0115

Carraige of Stone blocks white & red sand stone & kota stone slab Qty : @ 2.30 kg/cudm = 13.33 x 2.20 = 30.659 kg or 0.031 t Dressing charges : LABOUR: Mason (for plain stone work) 2nd class) Blacksmith 1st class Beldar Coolie Bandhani Fixing charges : Mason (for plain stone work) 2nd class) Blacksmith 1st class Beldar Coolie Bandhani Bhisti Scaffolding Mortar for laying and pointing Centring and shuttering Extra for using white cement Extra labour for lifting of material upto floor five level (0.01 x 1.5 = 0.015) Coolie

tonne

0.031

77.87

Day Day Day Day Day

0.176 0.012 0.088 0.044 0.088

273.00 301.00 247.00 247.00 260.00

Day Day Day Day Day Day L.S. L.S. L.S. L.S.

0.044 0.006 0.022 0.022 0.022 0.022 2.73 8.06 13.52 8.06

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49 1.49 1.49

Day

0.015

247.00 Total: 277.60

Add water charges @ 1% on

Add C.P & OH @15% on 280.38 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 32244.00 Rs 32244.00

Item Code: 7.13.2.2 Stone work in plain ashlar in ARCHES SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - One face dressed. - White sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity Rate MATERIALS: 1161 White sand stone block 10 cu 13.33 65.00 Finished work = 10 cudm + Add wastage @ 33.3% = 3.33 cudm Total = 13.33 cum 2216 Carraige of Stone blocks white & red sand stone & kota stone tonne 0.031 77.87 slab Qty : @ 2.30 kg/cudm = 13.33 x 2.20 = 30.659 kg or 0.031 t Dressing charges : LABOUR: 0125 Mason (for plain stone work) 2nd class) Day 0.176 273.00 0102 Blacksmith 1st class Day 0.012 301.00 0114 Beldar Day 0.088 247.00 0115 Coolie Day 0.044 247.00 0100 Bandhani Day 0.088 260.00 Fixing charges : 0125 Mason (for plain stone work) 2nd class) Day 0.044 273.00 0102 Blacksmith 1st class Day 0.006 301.00 0114 Beldar Day 0.022 247.00

DSR-12

Page 163 of 2298

0115 0100 0101 9999 9999 9999 9999

0115

Coolie Bandhani Bhisti Scaffolding Mortar for laying and pointing Centring and shuttering Extra for using white cement Extra labour for lifting of material upto floor five level (0.01 x 1.5 = 0.015) Coolie

Day Day Day L.S. L.S. L.S. L.S.

0.022 0.022 0.022 2.73 8.06 13.52 8.06

247.00 260.00 260.00 1.49 1.49 1.49 1.49

Day

0.015

247.00 Total: 284.27

Add water charges @ 1% on

Add C.P & OH @15% on 287.11 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 33018.00 Rs 33017.00

Item Code: 7.14.1.1 Stone work in plain ashlar in Domes in SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - One face dressed. - Red sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity Rate MATERIALS: 1160 Red sand stone block 10 cu 13.33 60.00 Finished work = 10 cudm + Add wastage @ 33.3% = 3.33 cudm Total = 13.33 cum 2216 Carraige of Stone blocks white & red sand stone & kota stone tonne 0.031 77.87 slab Qty : @ 2.30 kg/cudm = 13.33 x 2.20 = 30.659 kg or 0.031 t Dressing charges : LABOUR: 0125 Mason (for plain stone work) 2nd class) Day 0.176 273.00 0102 Blacksmith 1st class Day 0.006 301.00 0126 Mason (for ornamental stone work) 1st class Day 0.176 301.00 0114 Beldar Day 0.044 247.00 0115 Coolie Day 0.022 247.00 0100 Bandhani Day 0.044 260.00 Fixing charges : 0125 Mason (for plain stone work) 2nd class) Day 0.044 273.00 0102 Blacksmith 1st class Day 0.006 301.00 0114 Beldar Day 0.022 247.00 0115 Coolie Day 0.022 247.00 0100 Bandhani Day 0.022 260.00 0101 Bhisti Day 0.022 260.00 9999 Scaffolding L.S. 2.73 1.49 9999 Mortar for laying and pointing L.S. 8.06 1.49 9999 Centring and shuttering L.S. 33.15 1.49 9999 Extra for using white cement L.S. 8.06 1.49 Extra labour for lifting of material upto floor five level (0.01 x 1.5 = 0.015) 0115 Coolie Day 0.015 247.00 Total: Add water charges @ 1% on 330.28 Add C.P & OH @15% on

DSR-12

333.58

Page 164 of 2298

Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 38362.00 Rs 38362.00

Item Code: 7.14.1.2 Stone work in plain ashlar in Domes in SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - One face dressed. - White sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity Rate MATERIALS: 1161 White sand stone block 10 cu 13.33 65.00 Finished work = 10 cudm + Add wastage @ 33.3% = 3.33 cudm Total = 13.33 cum 2216 Carraige of Stone blocks white & red sand stone & kota stone tonne 0.031 77.87 slab Qty : @ 2.30 kg/cudm = 13.33 x 2.20 = 30.659 kg or 0.031 t Dressing charges : LABOUR: 0125 Mason (for plain stone work) 2nd class) Day 0.176 273.00 0102 Blacksmith 1st class Day 0.006 301.00 0126 Mason (for ornamental stone work) 1st class Day 0.176 301.00 0114 Beldar Day 0.044 247.00 0115 Coolie Day 0.022 247.00 0100 Bandhani Day 0.044 260.00 Fixing charges : 0125 Mason (for plain stone work) 2nd class) Day 0.044 273.00 0102 Blacksmith 1st class Day 0.006 301.00 0114 Beldar Day 0.022 247.00 0115 Coolie Day 0.022 247.00 0100 Bandhani Day 0.022 260.00 0101 Bhisti Day 0.022 260.00 9999 Scaffolding L.S. 2.73 1.49 9999 Mortar for laying and pointing L.S. 8.06 1.49 9999 Centring and shuttering L.S. 33.15 1.49 9999 Extra for using white cement L.S. 8.06 1.49 Extra labour for lifting of material upto floor five level (0.01 x 1.5 = 0.015) 0115 Coolie Day 0.015 247.00 Total: Add water charges @ 1% on 336.95 Add C.P & OH @15% on 340.32 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 39137.00 Rs 39136.00

Item Code: 7.14.2.1 Stone work in plain ashlar in DOMES SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - One face dressed. - Red sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity Rate MATERIALS: 1160 Red sand stone block 10 cu 13.33 60.00

DSR-12

Page 165 of 2298

2216

0125 0102 0126 0114 0115 0100 0125 0102 0114 0115 0100 0101 9999 9999 9999 9999

0115

Finished work = 10 cudm + Add wastage @ 33.3% = 3.33 cudm Total = 13.33 cum Carraige of Stone blocks white & red sand stone & kota stone slab Qty : @ 2.30 kg/cudm = 13.33 x 2.20 = 30.659 kg or 0.031 t Dressing charges : LABOUR: Mason (for plain stone work) 2nd class) Blacksmith 1st class Mason (for ornamental stone work) 1st class Beldar Coolie Bandhani Fixing charges : Mason (for plain stone work) 2nd class) Blacksmith 1st class Beldar Coolie Bandhani Bhisti Scaffolding Mortar for laying and pointing Centring and shuttering Extra for using white cement Extra labour for lifting of material upto floor five level (0.01 x 1.5 = 0.015) Coolie

tonne

0.031

77.87

Day Day Day Day Day Day

0.352 0.012 0.352 0.088 0.044 0.088

273.00 301.00 301.00 247.00 247.00 260.00

Day Day Day Day Day Day L.S. L.S. L.S. L.S.

0.044 0.006 0.022 0.022 0.022 0.022 2.73 8.06 33.15 8.06

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49 1.49 1.49

Day

0.015

247.00 Total: 460.85

Add water charges @ 1% on

Add C.P & OH @15% on 465.46 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 53528.00 Rs 53528.00

Item Code: 7.14.2.2 Stone work in plain ashlar in DOMES SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - Both face dressed. - White sand stone Details of Cost for : 0.01 Cum Code Description Unit Quantity Rate MATERIALS: 1161 White sand stone block 10 cu 13.33 65.00 Finished work = 10 cudm + Add wastage @ 33.3% = 3.33 cudm Total = 13.33 cum 2216 Carraige of Stone blocks white & red sand stone & kota stone tonne 0.031 77.87 slab Qty : @ 2.30 kg/cudm = 13.33 x 2.20 = 30.659 kg or 0.031 t Dressing charges : LABOUR: 0125 Mason (for plain stone work) 2nd class) Day 0.352 273.00 0102 Blacksmith 1st class Day 0.012 301.00 0126 Mason (for ornamental stone work) 1st class Day 0.352 301.00 0114 Beldar Day 0.088 247.00 0115 Coolie Day 0.044 247.00

DSR-12

Page 166 of 2298

0100 0125 0102 0114 0115 0100 0101 9999 9999 9999 9999

0115

Bandhani Fixing charges : Mason (for plain stone work) 2nd class) Blacksmith 1st class Beldar Coolie Bandhani Bhisti Scaffolding Mortar for laying and pointing Centring and shuttering Extra for using white cement Extra labour for lifting of material upto floor five level (0.01 x 1.5 = 0.015) Coolie

Day

0.088

260.00

Day Day Day Day Day Day L.S. L.S. L.S. L.S.

0.044 0.006 0.022 0.022 0.022 0.022 2.73 8.06 33.15 8.06

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49 1.49 1.49

Day

0.015

247.00 Total: 467.52

Add water charges @ 1% on

Add C.P & OH @15% on 472.20 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 54303.00 Rs 54302.00

Item Code: 7.15.1.1 Stone work ashlar punched (ordinary) in SS upto floor 5 level in CM 1:6 Red sand stone: Single faced punched.

Code

1160 2216

0125 0102 0114 0115 0100

0125 0102 0114 0115 0100 0101 9999 9999

0115

Description

Details of Cost for : 0.01 Cum Unit Quantity

MATERIALSRed sand stone Finished work = 10 cudm. Add wastage @ 33.3% = 3.33 cudm. Total = 13.33 cudm. Cost of stone 10 cu Carriage of stone @ 2.30kg/cudm = tonne 13.33x2.30=30.659 kg= tonne say 0.031 t Dressing charges LABOUR: Stone mason (plane work) 2nd class Day Blacksmith 1st class Day Beldar Day Coolie Day Bandhani Day Fixing charges LABOUR: Mason (for plain stone work) 2nd class) Day Blacksmith 1st class Day Beldar Day Coolie Day Bandhani Day Bhishti Day Scaffolding L.S. Mortar for laying and pointing L.S. Extra labour for lifting of materials upto floor V level= 0.01x1.50 = 0.015 Coolie Day

13.33 0.031

60.00 77.87

0.059 0.006 0.044 0.022 0.044

273.00 301.00 247.00 247.00 260.00

0.044 0.006 0.022 0.022 0.022 0.022 2.73 8.06

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49

0.015

247.00 Total: 183.96

Add water charges @ 1% on

DSR-12

Rate

Page 167 of 2298

Add C.P & OH @15% on 185.80 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 21367.00 Rs 21366.00

Item Code: 7.15.1.2 Stone work ashlar punched (ordinary) in SS upto floor 5 level in CM 1:6 - White sand stone: One Face punched

Code 1161

2216

0125 0102 0114 0115 0100

0125 0102 0114 0115 0100 0101 9999 9999

0115

Description MATERIALSWhite sand stone block Finished work = 10 cudm. Add wastage @ 33.3% = 3.33 cudm. Total = 13.33 cudm Carriage of stone @ 2.30kg/cudm 13.33x2.30 = 30.659 kg say 0.031 t Dressing charges LABOUR: Stone mason (plane work) 2nd class Black smith 1st class Beldar Coolie Bandhani Fixing charges LABOUR: Stone mason (plan work) 2nd class Blacksmith 1st class Beldar Coolie Bandhani Bhishti Scafolding Mortar for laying and pointing Extra labour for lfting of material upto floor five level (0.01x1.5=0.015) Coolie

Details of Cost for : 0.01 Cum Unit Quantity

Rate

10 cu

13.33

65.00

tonne

0.031

77.87

Day Day Day Day Day

0.059 0.006 0.044 0.022 0.044

273.00 301.00 247.00 247.00 260.00

Day Day Day Day Day Day L.S. L.S.

0.044 0.006 0.022 0.022 0.022 0.022 2.73 8.06

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49

Day

0.015

247.00 Total: 190.63

Add water charges @ 1% on

Add C.P & OH @15% on 192.54 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 22142.00 Rs 22141.00

Item Code: 7.15.2.1 Stone work ashlar punched (ordinary) in SS upto floor 5 level in CM 1:6 Both faced punched. - Red sand stone

Code

1160

DSR-12

Description Details of cost for 10 cudm. MATERIALSRed sand stone block Finished work = 10 cudm.+ Add wastage @ 33.3% = 3.33 cudm.

Details of Cost for : 0.01 Cum Unit Quantity

10 cu

13.33

Rate

60.00

Page 168 of 2298

2216

0115

0125 0102 0114 0115 0100

0125 0102 0114 0115 0100 0101 9999 9999

Total = 13.33 cudm. Carriage of stone @ 2.30kg/cudm = 13.33x2.30=30.659 kg= tonne say 0.031 t Extra labour for lifting of material upto floor five level 0.01 x 1.50=0.015 Coolie Dressing charges LABOUR: Stone mason (plane work) 2nd class Blacksmith 1st class Beldar Coolie Bandhani Fixing charges LABOUR: Stone mason (plane work) 2nd class Blacksmith 1st class Beldar Coolie Bandhani Bhishti Scaffolding Mortar for laying and pointing

tonne

0.031

77.87

Day

0.015

247.00

Day Day Day Day Day

0.118 0.012 0.088 0.044 0.088

273.00 301.00 247.00 247.00 260.00

Day Day Day Day Day Day L.S. L.S.

0.044 0.006 0.022 0.022 0.022 0.022 2.73 8.06

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49 Total: 229.61

Add water charges @ 1% on

Add C.P & OH @15% on 231.91 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 26670.00 Rs 26668.00

Item Code: 7.15.2.2 Stone work ashlar punched (ordinary) in SS upto floor 5 level in CM 1:6 White sand stone. Double faced punched.

Code

1161 2216

0115

0125 0102 0114 0115 0100

DSR-12

Description Details of cost for 10 cudm. MATERIALSWhite sand stone Finished work = 10 cudm. Add wastage @ 33.3% = 3.33 cudm. Total = 13.33 cudm. Cost of stone Carriage of stone @ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = tonne kg say 0.031 t. Extra labour for lifting of material upto floor V level. 0.01 x 1.50 = 0.015 Coolie Dressing charges LABOUR: Stone mason (plane work) 2nd class Blacksmith 1st class Beldar Coolie Bandhani

Details of Cost for : 0.01 Cum Unit Quantity

Rate

10 cu tonne

13.33 0.031

65.00 77.87

Day

0.015

247.00

Day Day Day Day Day

0.118 0.012 0.088 0.044 0.088

273.00 301.00 247.00 247.00 260.00

Page 169 of 2298

0125 0102 0114 0115 0100 0101 9999 9999

Fixing charges LABOUR: Stone mason (plane work) 2nd class Blacksmith 1st class Beldar Coolie Bandhani Bhishti Scaffolding Mortar for laying and pointing

Day Day Day Day Day Day L.S. L.S.

0.044 0.006 0.022 0.022 0.022 0.022 2.73 8.06

Add water charges @ 1% on

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49 Total: 236.28

Add C.P & OH @15% on 238.64 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 27444.00 Rs 27442.00

Item Code: 7.16 Extra for stone work, plain ashlar or ashlar punched above floor V level for every four floors or part thereof.

Code

0114

Details of Cost for : 0.01 Cum Description Unit Quantity Details of cost for 10 cudm above floor V level Labour required for lifting of material (above floor five level for each additional four floors) or part thereof. Extra labour for lifting of materials above floor V level (0.01 x 2.00 = 0.020) Beldar Day 0.02 Add water charges @ 1% on

Rate

247.00 Total: 4.94

Add C.P & OH @15% on 4.99 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 574.00 Rs 574.00

Item Code: 7.17.1 Extra for plain ashlar or ashlar punched in :- Square or rectangular pillars. Code 9999

Description Details of cost for 10 cudm. Labour and materials

Details of Cost for : 0.01 Cum Unit Quantity L.S.

8.97

Add water charges @ 1% on

Rate 1.49 Total: 13.37

Add C.P & OH @15% on 13.50 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1553.00 Rs 1552.00

Item Code: 7.18 Extra for stone work; plain ashlar/ashlar punched curved on plan with a mean radius not exceeding 6 metre. Details of Cost for : 0.01 Cum

DSR-12

Page 170 of 2298

Code 9999

Description Details of cost for 10 cudm. Labour and materials

Unit L.S.

Quantity

Rate

6.24

1.49 Total: 9.30

Add water charges @ 1% on

Add C.P & OH @15% on 9.39 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1080.00 Rs 1080.00

Item Code: 7.19 Extra for additional cost of centring for arches exceeding 6 m span. Code

1197 2204

1225

1034

2302

DSR-12

Details of Cost for : 33.31 Sqm Description Unit Quantity Rate Centering and shuttering for arches and carved surface exceeding 6m in span (an average of 8m) Radius R = 5m 2R-2=4+4 tan-’(4/3)=53.28° 2x53.28°=106° Surface area =2x22/7x5x3.6x106/360=33.3lsqm. Arc=9.25m MATERIAL: Tie-2x8x0. 18x0.05 =0.144cum Struts-2x2.5x0.1x0.1 =0.050cum. Struts-2x 1.77x0.1x0. l=0.035cum. Ribs-6x 1.54x0.23x0.1 =0.213cum. Struts-2xl .72x0.1x0.1 =0.034cum. Total=0.476cum. For four such frames =0.476x4= 1.904 cum. Iaggings-75x3.6x0.125x0.075=2.531 cum. Tie-2x3.6x0.225x0.038=0.062cum. Brace-3x2x2.14x0.225x0.038=0.110 Brace-3x4x3.8x0.225x0.038=0.390 Sleepers-4x3.6x0.20x0.15=0.432 Sleepers-2x4x3.6xO. 175x0.075=0.378 Vertical post-4x4x3.6x0.15x0.15=1.296 Total =7.103cum. Qty taken l/8th of qty for cost using once = cum 0.8879 25000.00 7.103/8 = 0.8879 cum Carriage of wood cum 0.8879 100.11 Fittings: 3 way straps 50mmxl0mm = 32 Nos. 32 no. @0.50cm each = 16m Straps-50mmxl0mm = 8 Nos. @0.25cm each = 2m Total = 18m 18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q quint 0.0878 3950.00 Qty taken l/8th of qty for cost using once = 0.702/8 = 0.08775 Qtl. Bolts 160 Nos. 254 mm long 16mm dia.quint 0.08 5400.00 160x.254xl .58=64.21 kg=0.64q. Qty taken l/8th of qty for cost using once = 0.64/8 = 0.08 Qtl. Carriage of steel = 0.1342t tonne 0.0168 77.87 Qty taken l/8th of qty for cost using once =

Page 171 of 2298

0112 0114 9999

05.009.09

0.1342/8 = 0.01677 t Labour: Carpenter 2nd class Beldar Sundries Less Cost of shuttering etc. for an arch exceeding 6 m span i.e. for an average of 8 m span C/S i/c strutting, propping etc at all level Arches, domes etc

Day Day L.S.

28.00 24.00 134.55

273.00 247.00 1.49

-33.31

866.70

Add water charges @ 1% except on [A] i.e on

Total: 36838.99

Add C.P & OH @15% except on [A] i.e on 37207.38 Cost for 33.31 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 417.85 Rs 417.85

Item Code: 7.20.1 Stone work sunk or moulded or sunk and moulded upto floor V level in CM 1 : 6 CS :- Red sand stone. Details of Cost for : 0.01 Cum Code Description Unit Quantity Details of cost for 10 cudm. MATERIALSRed sand stone Finished work = 10 cudm. Add wastage @ 33.3% = 3.33 cudm. Total = 13.33 cudm. 1160 Cost of red sand stone 10 cu 13.33 2216 Cement mortar : Carriage of stone @ tonne 0.031 2.30kg/cudm= 13.33x2.30 = 30.659 kg = 0.031 t. 9999 Extra for using white cement L.S. 8.06 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 0.291 0102 Blacksmith 1 st class Day 0.006 0114 Beldar Day 0.044 0115 Coolie Day 0.022 0100 Bandhani Day 0.044 Fixing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 0.044 0102 Blacksmith 1st class Day 0.006 0114 Beldar Day 0.022 0115 Coolie Day 0.022 0100 Bandhani Day 0.022 0101 Bhishti Day 0.022 9999 Scaffolding L.S. 2.73 9999 Mortar for laying and pointing L.S. 8.06 Extra labour for lifting of materials upto floor V level 0.01x1.50=0.015 0115 Coolie Day 0.015 Add water charges @ 1% on

Rate

60.00 77.87

1.49

273.00 301.00 247.00 247.00 260.00

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49

247.00 Total: 259.30

Add C.P & OH @15% on 261.89 Cost for 0.01 Cum

DSR-12

Page 172 of 2298

Rate per One Cum: Rate as per DSR-12:

Rs 30117.00 Rs 30116.00

Item Code: 7.20.2 Stone work sunk or moulded or sunk and moulded upto floor V level in CM 1 : 6 CS :- White sand stone. Details of Cost for : 0.01 Cum Code Description Unit Quantity Details of cost for 10 cudm. MATERIALSRed sand stone Finished work = 10 cudm.+ Add wastage @ 33.3% = 3.33 cudm. Total = 13.33 cudm. 1161 Cost of stone 10 cu 13.33 2216 Carriage of stone @ 2.30kg/cudm = tonne 0.031 13.33x2.30=30.659kg=0.031t. 9999 Extra for using white cement L.S. 8.06 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 0.291 0102 Blacksmith 1 st class Day 0.006 0114 Beldar Day 0.044 0115 Coolie Day 0.022 0100 Bandhani Day 0.044 Fixing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 0.044 0102 Blacksmith 1 st class Day 0.006 0114 Beldar Day 0.022 0115 Coolie Day 0.022 0100 Bandhani Day 0.022 0101 Bhishti Day 0.022 9999 Scaffolding L.S. 2.73 9999 Mortar for laying and pointing L.S. 8.06 Extra labour for lifting of materials upto floor V level 0.01x1.50=0.015 0115 Coolie Day 0.015 Add water charges @ 1% on

Rate

65.00 77.87 1.49

273.00 301.00 247.00 247.00 260.00

273.00 301.00 247.00 247.00 260.00 260.00 1.49 1.49

247.00 Total: 265.97

Add C.P & OH @15% on 268.63 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 30892.00 Rs 30891.00

Item Code: 7.21.1 Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars.

Code 9999

DSR-12

Description Details of cost for 10 cudm. Labour

Details of Cost for : 0.01 Cum Unit Quantity L.S.

11.70

Rate

Add water charges @ 1% on

1.49 Total: 17.43

Add C.P & OH @15% on

17.60

Page 173 of 2298

Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 2024.00 Rs 2024.00

Item Code: 7.21.2 Extra for stone work sunk or moulded or sunk and moulded or carved in : Circular or polygonal pillars. Details of Cost for : 0.01 Cum Code Description Unit Quantity Details of cost for 10 cudm. 9999 Labour L.S. 33.15 Add water charges @ 1% on

Rate 1.49 Total: 49.39

Add C.P & OH @15% on 49.88 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5736.00 Rs 5736.00

Item Code: 7.22 Extra for stone work sunk or moulded in cornices. Code

0125 0114

Details of Cost for : 22.50 units Description Unit Quantity Details of cost for a cornice 30cm long 60cm deep and 15cm projection Extra labour: Stone mason (2nd class) Day 0.50 Beldar Day 0.75 Add water charges @ 1% on

Rate

273.00 247.00 Total: 321.75

Add C.P & OH @15% on 324.97 Cost for 22.50 units Rate per Units: Rate as per DSR-12:

Rs 16.61 Rs 16.60

Item Code: 7.23.1.1 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed with rough backing: 70 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 70 cudm. + Add wastage @ 33.3% = 23.33 cudm. Total = 93.33 cudm. 1160 Red sand stone block 10 cu 93.33 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.215 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0100 Bandhani Day 0.224 260.00

DSR-12

Page 174 of 2298

0125 0100 0114 0115 0101 1237 9999 03.008

Fixing charges LABOUR: Stone mason (for plain work) 2nd class Bandhani Beldar Coolie Bhisti Cutting sand stone slab by mechanical device Scaffolding Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item No 3.8 of S.H. mortar)

Day Day Day Day Day metre L.S.

0.448 0.336 0.336 0.336 0.336 4.00 19.76 0.018

273.00 260.00 247.00 247.00 260.00 8.00 1.49 4145.53

Add water charges @ 1% on

Total: 1735.29

Add C.P & OH @15% on 1752.64 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2015.54 Rs 2015.55

Item Code: 7.23.1.2 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed with rough backing: 60 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 60 cudm. Add wastage @ 33.3% = 20 cudm. Total = 80 cudm. 1160 Cost of stone 10 cu 80.00 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.184 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0101 Bandhani Day 0.224 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 Total: Add water charges @ 1% on 1652.90 Add C.P & OH @15% on 1669.43 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 1919.84 Rs 1919.85

Page 175 of 2298

Item Code: 7.23.1.3 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed with rough backing: 50 mm thick . Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 50 cudm. Add wastage @ 33.3% = 16.7 cudm. Total = 66.7 cudm. 1160 Cost of stone 10 cu 66.70 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.153 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0101 Bandhani Day 0.224 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0101 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No 3.8 fo SH- mortar) Total: Add water charges @ 1% on 1570.68 Add C.P & OH @15% on 1586.39 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1824.35 Rs 1824.35

Item Code: 7.23.1.4 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed with rough backing: 40 mm thick . Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 40 cudm. Add wastage @ 33.3% = 13.33 cudm. Total = 53.33 cudm. 1160 Cost of stone 10 cu 53.33 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.123 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0100 Bandhani Day 0.224 260.00 Fixing charges

DSR-12

Page 176 of 2298

0125 0100 0114 0115 0101 1237 9999 03.008

LABOUR: Stone mason (for plain work) 2nd class Bandhani Beldar Coolie Bhisti Cutting sand stone slab by mechanical device Scaffolding Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item No 3.8 of SH - mortar)

Day Day Day Day Day metre L.S.

0.448 0.336 0.336 0.336 0.336 4.00 19.76 0.018

273.00 260.00 247.00 247.00 260.00 8.00 1.49 4145.53

Add water charges @ 1% on

Total: 1488.13

Add C.P & OH @15% on 1503.01 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1728.46 Rs 1728.45

Item Code: 7.23.1.5 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed with rough backing: 30 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 30 cudm. Add wastage @ 33.3% = 9.99cudm. Total = 39.99 cudm. 1160 Cost of stone 10 cu 39.99 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.092 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1 st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0101 Bandhani Day 0.224 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No 3.8 of SH. mortar) Total: Add water charges @ 1% on 1405.67 Add C.P & OH @15% on 1419.73 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 1632.69 Rs 1632.70

Page 177 of 2298

Item Code: 7.23.2.1 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut with rough backg: 70 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 70 cudm. + Add wastage @ 33.3% = 23.33 cudm. Total = 93.33 cudm. 1160 Cost of stone 10 cu 93.33 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.215 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00 0100 Bandhani Day 0.448 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0101 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No. 3.8 of SH- mrtar) Total: Add water charges @ 1% on 2254.71 Add C.P & OH @15% on 2277.26 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2618.85 Rs 2618.85

Item Code: 7.23.2.2 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut with rough backg: 60 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 60 cudm. Add wastage @ 33.3% = 20 cudm. Total = 80 cudm. 1160 Cost of stone 10 cu 80.00 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.184 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00 0100 Bandhani Day 0.448 260.00 Fixing charges

DSR-12

Page 178 of 2298

0125 0100 0114 0115 0101 1237 9999 03.008

LABOUR: Stone mason (for plain work) 2nd class Bandhani Beldar Coolie Bhisti Cutting sand stone slab by mechanical device Scaffolding Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item No. 3.8 of SH- mortar)

Day Day Day Day Day metre L.S.

0.448 0.336 0.336 0.336 0.336 4.00 19.76 0.018

273.00 260.00 247.00 247.00 260.00 8.00 1.49 4145.53

Add water charges @ 1% on

Total: 2172.32

Add C.P & OH @15% on 2194.04 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2523.15 Rs 2523.15

Item Code: 7.23.2.3 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut with rough backg: 50 mm thick . Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 50 cudm. + Add wastage @ 33.3% = 16.7 cudm. Total = 66.7 cudm. 1160 Cost of stone 10 cu 66.70 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.153 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00 0101 Bandhani Day 0.448 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No. 3.8 of SH- mortar) Total: Add water charges @ 1% on 2090.10 Add C.P & OH @15% on 2111.00 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 2427.65 Rs 2427.65

Page 179 of 2298

Item Code: 7.23.2.4 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut with rough backg: 40 mm thick . Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 40 cudm. + Add wastage @ 33.3% = 13.33 cudm. Total = 53.33 cudm. 1160 Cost of stone 10 cu 53.33 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.123 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00 0100 Bandhani Day 0.448 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No. 3.8 of SH- mortar) Total: Add water charges @ 1% on 2007.55 Add C.P & OH @15% on 2027.63 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2331.77 Rs 2331.75

Item Code: 7.23.2.5 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut with rough backg: 30 mm thick Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 30 cudm. + Add wastage @ 33.3% - 9.99cudm. Total - 39.99 cudm. 1160 Cost of stone 10 cu 39.99 60.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.092 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00 0101 Bandhani Day 0.448 260.00 Fixing charges

DSR-12

Page 180 of 2298

0125 0101 0114 0115 0101 1237 9999 03.008

LABOUR: Stone mason (for plain work) 2nd class Bandhani Beldar Coolie Bhisti Cutting sand stone slab by mechanical device Scaffolding Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item No. 3.8 of SH- mortar)

Day Day Day Day Day metre L.S.

0.448 0.336 0.336 0.336 0.336 4.00 19.76 0.018

273.00 260.00 247.00 247.00 260.00 8.00 1.49 4145.53

Add water charges @ 1% on

Total: 1925.09

Add C.P & OH @15% on 1944.34 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2235.99 Rs 2236.00

Item Code: 7.23.3.1 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed with rough backing: 70 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 70 cudm. + Add wastage @ 33.3% = 23.33 cudm. Total = 93.33 cudm. 1161 Cost of stone 10 cu 93.33 65.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.215 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0100 Bandhani Day 0.224 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab thick by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No. 3.8 of SH- mortar) Total: Add water charges @ 1% on 1781.96 Add C.P & OH @15% on 1799.78 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 2069.75 Rs 2069.75

Page 181 of 2298

Item Code: 7.23.3.2 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed with rough backing: 60 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 60 cudm. Add wastage @ 33.3% = 20 cudm. Total = 80 cudm. 1161 Cost of stone 10 cu 80.00 65.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.184 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0100 Bandhani Day 0.224 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab thick by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No. 3.8 of SH- mortar) Total: Add water charges @ 1% on 1692.90 Add C.P & OH @15% on 1709.83 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1966.30 Rs 1966.30

Item Code: 7.23.3.3 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed with rough backing: 50 mm thick . Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 50 cudm. Add wastage @ 33.3% = 1,6.7 cudm. Total = 66.7 cudm. 1161 Cost of stone 10 cu 66.70 65.00 2216 Carriage of stone @ 2.30 kg/cudm. tonne 0.153 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0100 Bandhani Day 0.224 260.00 Fixing charges

DSR-12

Page 182 of 2298

0125 0100 0114 0115 0101 1237 9999 03.008

LABOUR: Stone mason (for plain work) 2nd class Bandhani Beldar Coolie Bhisti Cutting sand stone slab thick by mechanical device Scaffolding Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item No. 3.8 of SH- mortar)

Day Day Day Day Day metre L.S.

0.448 0.336 0.336 0.336 0.336 4.00 19.76 0.018

273.00 260.00 247.00 247.00 260.00 8.00 1.49 4145.53

Add water charges @ 1% on

Total: 1604.03

Add C.P & OH @15% on 1620.07 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1863.08 Rs 1863.10

Item Code: 7.23.3.4 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed with rough backing: 40 mm thick . Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 40 cudm. Add wastage @ 33.3% = 13.3 cudm. Total = 53.3 cudm. 1161 Cost of stone 10 cu 53.30 65.00 2216 Carriage of stone @ 2.30 kg/cudm. tonne 0.123 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0100 Bandhani Day 0.224 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0101 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab thick by mechanical metre 4.00 8.00 device 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No. 3.8 of SH- mortar) Total: Add water charges @ 1% on 1514.60 Add C.P & OH @15% on 1529.75 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 1759.21 Rs 1759.20

Page 183 of 2298

Item Code: 7.23.3.5 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed with rough backing: 30 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 30 cudm. + Add wastage @ 33.3% = 9.99 cudm. Total = 39.99 cudm. 1161 Cost of stone 10 cu 39.99 65.00 2216 Carriage of stone @ 2.30 kg/cudm. tonne 0.092 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 1.35 273.00 0102 Blacksmith 1st class Day 0.032 301.00 0114 Beldar Day 0.224 247.00 0115 Coolie Day 0.112 247.00 0100 Bandhani Day 0.224 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab thick by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No. 3.8 of SH.Mortar) Total: Add water charges @ 1% on 1425.67 Add C.P & OH @15% on 1439.93 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1655.92 Rs 1655.90

Item Code: 7.23.4.1 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut with rough backg: 70 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 70 cudm. Add wastage @ 33.3% = 23,.33 cudm. Total = 93.33 cudm. 1161 Cost of stone 10 cu 93.33 65.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.215 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00 0100 Bandhani Day 0.448 260.00

DSR-12

Page 184 of 2298

0125 0100 0114 0115 0101 1237 9999 03.008

Fixing charges LABOUR: Stone mason (for plain work) 2nd class Bandhani Beldar Coolie Bhisti Cutting sand stone slab thick by mechanical device Scaffolding Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item No. 3.8 of SH.Mortar)

Day Day Day Day Day metre L.S.

0.448 0.336 0.336 0.336 0.336 4.00 19.76 0.018

273.00 260.00 247.00 247.00 260.00 8.00 1.49 4145.53

Add water charges @ 1% on

Total: 2301.38

Add C.P & OH @15% on 2324.39 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2673.05 Rs 2673.05

Item Code: 7.23.4.2 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut with rough backg: 60 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 60 cudm. Add wastage @ 33.3% = 20 cudm. Total = 80 cudm. 1161 Cost of stone 10 cu 80.00 65.00 2216 Carriage of stone @ 2.30kg/cudm tonne 0.184 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00 0100 Bandhani Day 0.448 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab thick by mechanical device metre 4.00 8.00 9999 Scaffolding L.S. 19.76 1.49 (Rate as per item No. 3.8 of SH.Mortar) 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 Total: Add water charges @ 1% on 2212.32 Add C.P & OH @15% on 2234.44 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 2569.61 Rs 2569.60

Page 185 of 2298

Item Code: 7.23.4.3 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut with rough backg: 50 mm thick . Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 50 cudm. Add wastage @ 33.3% = 16.7 cudm. Total = 66.7 cudm. 1161 Cost of stone 10 cu 66.70 65.00 2216 Carriage of stone @ 2.30 kg/cudm. tonne 0.153 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00 0100 Bandhani Day 0.448 260.00 Fixing charges LABOUR: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab thick by mechanical metre 4.00 8.00 device 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No. 3.8 of SH.Mortar) Total: Add water charges @ 1% on 2123.45 Add C.P & OH @15% on 2144.68 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2466.38 Rs 2466.40

Item Code: 7.23.4.4 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut with rough backg: 40 mm thick . Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSFinished work = 40 cudm. Add wastage @ 33.3% = 1,3.3 cudm. Total = 53.3 cudm. 1161 Cost of stone 10 cu 53.30 65.00 2216 Carriage of stone @ 2.30 kg/cudm. tonne 0.123 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges LABOUR: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00

DSR-12

Page 186 of 2298

0100

0125 0100 0114 0115 0101 1237 9999 03.008

Bandhani Fixing charges LABOUR: Stone mason (for plain work) 2nd class Bandhani Beldar Coolie Bhisti Cutting sand stone slab thick by mechanical device Scaffolding Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item No. 3.8 of SH.Mortar)

Day

0.448

260.00

Day Day Day Day Day metre

0.448 0.336 0.336 0.336 0.336 4.00

273.00 260.00 247.00 247.00 260.00 8.00

L.S.

19.76 0.018

1.49 4145.53

Add water charges @ 1% on

Total: 2034.02

Add C.P & OH @15% on 2054.36 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2362.51 Rs 2362.50

Item Code: 7.23.4.5 Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut with rough backg: 30 mm thick Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate Details of cost for 1 sqm. MaterialsFinished work = 30 cudm. Add wastage @ 33.3% = 9.99 cudm. Total = 39.99 cudm. 1161 Cost of stone 10 cu 39.99 65.00 2216 Carriage of stone @ 2.30 kg/cudm. tonne 0.092 77.87 9999 Extra for using white cement L.S. 26.91 1.49 Dressing charges Labour: 0125 Stone mason (plane work) 2nd class Day 2.70 273.00 0102 Blacksmith 1st class Day 0.064 301.00 0114 Beldar Day 0.448 247.00 0115 Coolie Day 0.224 247.00 0100 Bandhani Day 0.448 260.00 Fixing charges Labour: 0125 Stone mason (for plain work) 2nd class Day 0.448 273.00 0100 Bandhani Day 0.336 260.00 0114 Beldar Day 0.336 247.00 0115 Coolie Day 0.336 247.00 0101 Bhisti Day 0.336 260.00 1237 Cutting sand stone slab thick by mechanical metre 4.00 8.00 device 9999 Scaffolding L.S. 19.76 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.018 4145.53 (Rate as per item No. 3.8 of SH.Mortar) Total: Add water charges @ 1% on 1945.09 Add C.P & OH @15% on 1964.54 Cost for 1.00 Sqm

DSR-12

Page 187 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 2259.22 Rs 2259.20

Item Code: 7.24 Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Details of Cost for : 0.01 Cum Code Description Unit Quantity Details of cost for 10 cudm. 9999 Labour and materials L.S. 8.97 Add water charges @ 1% on

Rate 1.49 Total: 13.37

Add C.P & OH @15% on 13.50 Cost for 0.01 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1553.00 Rs 1552.00

Item Code: 7.25 P/F stainless steel cramps in wall lining with CM 1:2 Code

Description Details of cost for one cramp MATERIALS: Stainless steel cramp 10x0.064x0.025x0.006= 9.60x10^-5 10x0.025x0.025x0.006= 3.70x10^-5 =13.3 x 10^-5 Less hole 10x0.024x0.010x0.006= 1.40x10^-5 11.9x10^-5x7850=0.934kg Add wastage @ 5% =0.047 kg Total = 0.981kg

7339 9999 03.007

Stainless steel cramp Carriage Cement mortar 1:2 (1 cement : 2 coarse) (Rate as per this No. 3.7) Labour for fixing m position

9999

Details of Cost for : 0.934 Kg Unit Quantity

Rate

kilog L.S.

0.981 3.90 0.001

320.00 1.49 4863.86

L.S.

65.00

1.49 Total: 421.44

Add water charges @ 1% on

Add C.P & OH @15% on 425.65 Cost for 0.934 Kg Rate per One Kg: Rate as per DSR-12:

Rs 524.09 Rs 524.10

Item Code: 7.26 P/F stone dowels 10 x 5 x 2.50 Cm cut to double wedge shape as per design. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one dowel 9999 Cost of stone including carriage L.S. 9.10 Labour for dressing dowel cutting chase and fixing etc. 9999 Labour for dressing dowel cutting chase and fixing etc. L.S. 5.33

DSR-12

Rate 1.49 1.49

Page 188 of 2298

03.007

Cement mortar 1:2 (1 cement : 2 coarse) ( Rate as per items No. 3.7)

0.001

4863.86

Add water charges @ 1% on

Total: 26.36

Add C.P & OH @15% on 26.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 30.61 Rs 30.60

Item Code: 7.27 P/F copper pins 7.5cm long 6mm dia in wall lining in CM 1:2 Code

0873 9999 03.007 9999

Description Details of cost for one copper pinMATERIALSCopper pins 6 mm dia 7.5 cm long Labour for making pin in to required shape and size, cutting chases in stone and fixing in Cement mortar 1:2 (1 cement : 2 coarse) Sundries including hire charges of hand cut machine etc.

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 3.90

10.00 1.49

L.S.

0.001 1.95

4863.86 1.49

Add water charges @ 1% on

Total: 23.58

Add C.P & OH @15% on 23.82 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 27.39 Rs 27.40

Item Code: 7.28.1.1 P/F sloping chajja of stone 40mm thick & upto 80cm wide beyond the wall as measured along the slope in CM 1:4 Red sand stone: With F.P.S. Bricks. Details of Cost for : 2.00 Sqm Code Description Unit Quantity Rate Details of cost for a chajja 2.00 sqm. (finished work) MATERIALSRed sand stone slab 40mm (average thickness)-Chisel dressed 80cm sloping length plus 20cm bearing Area = 2.5xl.00=2.50sqm. 1164 Cost of stone sqm 2.75 155.00 2216 Carriage @ 2.3kg/cudm. tonne 0.253 77.87 Labour for dressing: 0125 Mason (2nd class) Day 0.50 273.00 1002 Anchoring steel bars 12mm dia. 45cm long 5 nos. @ 0.80kg/m quint 0.02 4100.00 = 0.02q 9999 Cutting threads and cost of nuts, washers, etc. L.S. 67.34 1.49 03.012 Cement Mortar 1:2 (1 cement : 2 stone dust) 0.009 4678.61 9999 Pigment L.S. 6.24 1.49 9999 Extra cost of white cement L.S. 26.91 1.49 LABOUR: 0125 Stone mason (Plain) 2nd class Day 1.00 273.00 0114 Beldar Day 1.50 247.00 9999 Scaffolding and sundries etc. L.S. 16.12 1.49 Brick cover support 4 courses with bricks of class designation 75

DSR-12

Page 189 of 2298

9999

06.004.01

4x7+5+5=38cm girth 2.5m length =38cmx2.5m=95cm Cost of Brick cover support. L.S. Brick work in triangular gap above cover with bricks of class designation 7.5 in cement mortar 1:4-1/2x2.5x0.2x0.07=0.018cum. Brick work with FPS bricks of class designation 75 in super Cum structure above plinth level u

104.00

1.49

0.018

4067.84

Add water charges @ 1% except on [A] i.e on

Total: 1678.78

Add C.P & OH @15% except on [A] i.e on 1695.57 Cost for 2.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1011.57 Rs 1011.55

Item Code: 7.28.2.1 P/F sloping chajja of stone 40mm thick & upto 80cm wide beyond the wall as measured along the slope in CM 1:4 White sand stone : With F.P.S. bricks. Details of Cost for : 2.00 Sqm Code Description Unit Quantity Rate Details of cost for a chajja 2.00 sqm. (finished work) MATERIALSWhite sand stone slab 40mm (average thickness)-Chisel dressed 80cm sloping length plus 20cm bearing Area = 2.5x1.00=2.50sqm. 1165 Cost of stone sqm 2.75 170.00 2216 Carriage @ 2.3kg/cudm. tonne 0.253 77.87 Labour for dressing: 0125 Mason (2nd class) Day 0.50 273.00 1002 Anchoring steel bars 12mm dia. 45cm long 5 nos. @ 0.80kg/m quint 0.02 4100.00 = 0.02q 9999 Cutting threads and cost of nuts, washers, etc. L.S. 67.34 1.49 03.012 Cement Mortar 1:2 (1 cement : 2 stone dust) 0.009 4678.61 9999 Pigment L.S. 6.24 1.49 9999 Extra cost of white cement L.S. 26.91 1.49 LABOUR: 0125 Stone mason (Plain) 2nd class Day 1.00 273.00 0114 Beldar Day 1.50 247.00 9999 Scaffolding and sundries etc. L.S. 16.12 1.49 Brick cover support 4 courses with bricks of class designation 75 4x7+5+5=38cm girth 2.5m length =38cmx2.5m=95cm 9999 Cost for Brick cover support . L.S. 104.00 1.49 Brick work in triangular gap above cover with bricks of class designation 5 in cement mortar 1:4-1 /2x2.5x0.2x0.07=0.018cum. 06.004.01 Brick work with FPS bricks of class designation 75 in super Cum 0.018 4067.84 structure above plinth level u Total: Add water charges @ 1% except on [A] i.e on 1720.03 Add C.P & OH @15% except on [A] i.e on 1737.23 Cost for 2.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 1035.52 Rs 1035.50

Page 190 of 2298

Item Code: 7.29.1 P/F horizontal chajja of stone 40 mm thick and upto 80 cm in C.M. 1 :4 CS :- Red sand stone. Details of Cost for : 1.875 Sqm Code Description Unit Quantity Details of cost for (2.5xO.75m) 1.875 sqm. MATERIALSTaking 2.5mx75cm projection + 15cm bearing = 2.5x0.9 = 2.25 sqm. 1164 Cost of stone sqm 2.25 2216 Carriage @ 2.3kg/cudm. tonne 0.227 Labour for dressing: 0125 Mason (2nd class) for stone work Day 0.45 9999 Mortar for pointing 1:2 L.S. 53.82 9999 Pigment L.S. 6.24 9999 Extra cost of white cement L.S. 26.91 Labour: 0125 Mason (2nd class) Day 0.60 0114 Beldar Day 0.80 9999 Scaffolding and sundries etc. L.S. 13.52 Add water charges @ 1% on

Rate

155.00 77.87 273.00 1.49 1.49 1.49 273.00 247.00 1.49 Total: 1000.41

Add C.P & OH @15% on 1010.41 Cost for 1.875 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 619.72 Rs 619.70

Item Code: 7.29.2 P/F horizontal chajja of stone 40 mm thick and upto 80 cm in C.M. 1 :4 CS :- White sand stone. Details of Cost for : 1.875 Sqm Code Description Unit Quantity Details of cost for (2.5xO.75m) 1.875 sqm. MATERIALSTaking 2.5mx75cm projection + 15cm bearing = 2.5x0.9 = 2.25 sqm. 1165 White sand stone slab 40 mm thick (un-dressed) sqm 2.25 2216 Carriage @ 2.3kg/cudm. tonne 0.227 Labour for dressing: 0125 Mason (2nd class) for stone work Day 0.45 9999 Mortar for pointing 1:2 L.S. 53.82 9999 Pigment L.S. 6.24 9999 Extra cost of white cement L.S. 26.91 Labour: 0125 Mason (2nd class) Day 0.60 0114 Beldar Day 0.80 9999 Scaffolding and sundries etc. L.S. 13.52 Add water charges @ 1% on

Rate

170.00 77.87 273.00 1.49 1.49 1.49 273.00 247.00 1.49 Total: 1034.16

Add C.P & OH @15% on 1044.50 Cost for 1.875 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 640.63 Rs 640.60

Page 191 of 2298

Item Code: 7.30 30 mm red sand stone sun-shade (chisel-dressed) supported on stone brackets, fixed in walls with CM 1 : 4 CS.

Code

1166 2216 9999 0125 0114

Description Detail of cost for window 1.6m length and 0.70m width = 1.12 sqm. MATERIALS: Red stone slab (chisel dressed) 30mm average thickness overall width 0.70+0.15=0.85 metres Total area = 1.6x0.85=1.36sqm. Red stone brackets (chisel dressed) 30mm average thickness over all width of brackets 0.53+0.23=0.76m 2x0.3x0.76=0.46 Total 1.36+0.46 =1.82sqm. Add wastage @10% = 0.18sqm. Total = 2.00 sqm. carriage Cement mortar 1 :4 Labour for dressing and fixing Stone mason (plainy2nd class Beldar

Details of Cost for : 1.12 Sqm Unit Quantity

sqm tonne L.S. Day Day

Rate

2.00 0.14 13.52

120.00 77.87 1.49

0.86 0.50

273.00 247.00 Total: 629.32

Add water charges @ 1% on

Add C.P & OH @15% on 635.61 Cost for 1.12 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 652.63 Rs 652.65

Item Code: 7.31 P/F red sand stone brackets 55x22.5x45 cm sunk & moulded i/c P/F with 4 No. gun metal cramps 25 x 6 mm, 30 cm long.

Code

1160 2216

0125 0102 0114 0115 0100 0373

0125 0102 0114 0115

DSR-12

Description Details of cost for 1 bracket Quantity of stone for 1 bracket 1 x 55 x 22.5 x 45cm = 0.056cum or 56 cudm. Red sand stone = 56 cudm. Add wastage 10% = 5.6 cudm. Total =61.6 cudm. Cost of stone Carriage @ 2.3kg/ cudm. Dressing charges LABOUR Stone mason (plain work) 2nd class Blacksmith 1st class Beldar Coolie Bandhani Cost of Gun metal cramps 25x6mm x30 cm long Fixing charges LABOUR stone mason (plain work) 2nd class Blacksmith 1st class Beldar Coolie

Details of Cost for : 1.00 No. Unit Quantity

Rate

10 cu tonne

61.60 0.14

60.00 77.87

Day Day Day Day Day each

1.7926 0.037 0.271 0.1355 0.271 4.00

273.00 301.00 247.00 247.00 260.00 70.00

Day Day Day Day

0.2464 0.0336 0.1232 0.1232

273.00 301.00 247.00 247.00

Page 192 of 2298

0101 0101 9999 9999 0126

Bandhani Bhisti Scaffolding Mortar for laying and pointing Extra labour for ornamental finish : Stone mason (ornamental)

Day Day L.S. L.S.

0.1232 0.1232 15.29 45.14

260.00 260.00 1.49 1.49

Day

0.95

301.00 Total: 1910.18

Add water charges @ 1% on

Add C.P & OH @15% on 1929.28 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2218.67 Rs 2218.65

Item Code: 7.32.1 Stone work, plain in copings, cornices, string courses and plinth courses, in CM 1:6 CS: Red sand stone. Details of Cost for : 0.0675 Cum Code Description Unit Quantity Rate Details of cost for 10 cornices (30cm long 30cm deep and 7.5cm project-iron) = 67.5cudm. or 0.0675cum (For better accuracy) MATERIALS: Stone work plain ashlar cyclopean 3x3x0.75 - 6.75 cudm 07.012.01.1 Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 0.0675 22286.00 One face dressed Red sand st 9999 (A) Extra for using white cement L.S. 53.30 1.49 Extra labour for making the cornices 0125 (A) Stone mason (2nd class) Day 0.70 273.00 0114 (A) Beldar Day 0.70 247.00 Total: Add water charges @ 1% except on [A] i.e on 443.42 Add C.P & OH @15% except on [A] i.e on 447.85 Cost for 0.0675 Cum Rate per One Cum: Rate as per DSR-12:

Rs 29916.15 Rs 29914.00

Item Code: 7.32.2 Stone work, plain in copings, cornices, string courses and plinth courses, in CM 1:6 CS: White sand stone. Details of Cost for : 0.0675 Cum Code Description Unit Quantity Details of cost for 10 cornices (30cm long 30cm deep and 7.5cm project-iron) = 67.5cudm. (10 cornices taken for more ccuaracy) MATERIALS: Stone work plain ashlar cyclopean 10x3x3x0.75 = 67.5 cudm or 0.0675cum 07.012.01.2 Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 One face dressed White sand 9999 (A) Extra for using white cement L.S. Extra labour for making the cornices 0125 (A) Stone mason (2nd class) Day 0114 (A) Beldar Day

DSR-12

Rate

0.0675

23061.00

53.30

1.49

0.70 0.70

273.00 247.00 Total:

Page 193 of 2298

Add water charges @ 1% except on [A] i.e on

443.42

Add C.P & OH @15% except on [A] i.e on 447.85 Cost for 0.0675 Cum Rate per One Cum: Rate as per DSR-12:

Rs 30691.11 Rs 30690.00

Item Code: 7.33.1 P/F stone jali 40 mm thick throughout in CM 1:3 Red sand stone. Code

1164 2216

0125 0114 9999

Details of Cost for : 1.00 Sqm Unit Quantity

Description Details of cost for lsqmMATERIALS: Red sand stone slab 40mm=1.00 sqm Add 10% wastage Total =0.10/1.10 Red sand stone slab 40mm Carriage of stone slab LABOUR: For making, dressing and fixing Mason (plain) 2nd class Beldar Mortar and Sundries

Rate

sqm tonne

1.10 0.101

155.00 77.87

Day Day L.S.

12.70 8.45 80.73

273.00 247.00 1.49 Total: 5852.90

Add water charges @ 1% on

Add C.P & OH @15% on 5911.43 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 6798.14 Rs 6798.15

Item Code: 7.33.2 P/F stone jali 40 mm thick throughout in CM 1:3 White sand stone. Code

1165 2216

0125 0114 9999

Description Details of cost for lsqmMATERIALS: White sandstone slaJx40mm = 1.00 sqm Add 10% wastage Total =0.10/1.10 sqm White sand stone slab 40mm Carriage of stone slab LABOUR: For making, dressing and fixing Mason (plain) 2nd class Beldar Mortar and Sundries

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

sqm tonne

1.10 0.101

170.00 77.87

Day Day L.S.

12.70 8.45 80.73

273.00 247.00 1.49 Total: 5869.40

Add water charges @ 1% on

Add C.P & OH @15% on 5928.09 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 6817.30 Rs 6817.30

Item Code: 7.34

DSR-12

Page 194 of 2298

Extra for laying stone work in or under water and/or liquid mud i/c pumping/bailing out water and removing slush.

Code

0011 0114

Description Details of cost for depth of water 0.30m. Quantity of concrete = 14 cum. pumping hours = 3 hrs. on 0.375day. Beldar for cleaning slush

Details of Cost for : 4.20 units Unit Quantity

Day Day

0.375 4.00

Add water charges @ 1% on

Rate

500.00 247.00 Total: 1175.50

Add C.P & OH @15% on 1187.26 Cost for 4.20 units Rate per Units: Rate as per DSR-12:

Rs 325.08 Rs 325.10

Item Code: 7.35 Extra for stone work in or uder foul position . Code 0123 0124 0114 0115

Description Extra labour due to slow progressMason 1st class Mason 2nd class Beldar Coolie

Details of Cost for : 1.00 Cum Unit Quantity Day Day Day Day

0.02 0.02 0.25 0.15

Add water charges @ 1% on

Rate 301.00 273.00 247.00 247.00 Total: 110.28

Add C.P & OH @15% on 111.38 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 128.09 Rs 128.10

Item Code: 7.36 Wall lining butch work with Dholpur stone 40mm thick rough facing on the exposed surface with stone strips Details of Cost for : 1.00 Sqm Code Description Unit Quantity Dholpur stone 40mm thick Wall face = l.OOsqm. Deduct for embed within 3x0.04x0.10=0.12 sqm = 0.88sqm.

1165

1163

2216 1237

DSR-12

Add wastage 5% = 0.04sqm. Total = 0.92 sqm. Cost of stone 75mm thick 3x0.04x1.0 = 0.12 sqm. Add wastage 5% = 0.01 sqm. Total =0.13 sqm. Cost of stone Carriage of stone 0.92x0.04 =0.0368 cum. 0.13x0.075 =0.0100 cum. = 0.0468 cum. or 468 cudm. 468 cudm @ 2.3 kg/cudm = 108 kg = 0.108 tonne Carriage of stone Cutting stips of stone and giving rough finish assuming 50mm thick strips 20x1.0 = 20 metre

Rate

sqm

0.92

170.00

sqm

0.13

280.00

0.108 20.00

77.87 8.00

tonne metre

Page 195 of 2298

03.008

18.078 9999 0126 0125 0114 0101 9999

Mortar with coarse sand 1:3 for (a) stone backing 12mm thick = 0.0144 cum. (b) for fixing of stone = 0.40/25 - 0.0160 cum. Total = 0.0304 cum. Cement mortar 1:3 (1 cement : 3 coarse sand) Cutting chases and making good with mortar after insurting stone etc. Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. pipe etc. White cement and pigment for pointing LABOUR: Mason 1 st class Mason 2nd class Beldar Bhisti Sundries and scaffolding brushes etc.

0.0304

4145.53

3.00

64.49

L.S.

40.43

1.49

Day Day Day Day L.S.

0.25 0.25 0.50 0.03 26.91

301.00 273.00 247.00 260.00 1.49 Total: 862.37

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 870.99 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1195.11 Rs 1192.45

Item Code: 7.37.1.1 Stone work for wall lining (Veneer work) over 12 mm thick bed of C.M. 1 : 3 CS & jointed with CM 1:2 SD. Kota stone slabs exposed fsce dressed and rubbed: 25 mm thick. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate Materials : 25mm thids. kota stoneslabs = 10 sqm. Add 15% wistage = 1.50 sqm Total 11.50 sqm 1169 Kotastone slab 25mm thick. Sqm 11.50 175.00 2216 Carriage tonne 0.67 77.87 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.144 4145.53 (Rate as per item 3.8 of S.H. mortar) 9999 Cement mortar for pointing. L.S. 40.43 1.49 Labour: 0125 Mason 2nd class Day 6.50 273.00 0114 Beldar Day 6.50 247.00 0115 Coolie Day 4.30 247.00 0139 Beldar for rubbing and polishing (special rate) Day 10.80 260.00 9999 Sundries L.S. 111.54 1.49 Total: Add water charges @ 1% on 10138.16 Add C.P & OH @15% on 10239.54 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1177.55 Rs 1177.50

Item Code: 7.38.1.1 Stone tile work for wall lining:- 8 mm thick :- Granite stone of any colours. Code

DSR-12

Description

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Page 196 of 2298

2750 9999 03.008 0367 9999 0123 0114 9999 9999

MATERIALS : ton thickgranite stone tile = 10.OOsqm.+Add 2.5% westage = 0.25 sqm Ttofal =210 sqm Carriage of granite tiles L.S. Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item 3.8 of S.H. mortar) Cement slurry @ 3.3 kg/sqm. tonne Mortar for pointing in white cement L.S. Labour for placing and fixing : Mason 1st class Day Beldar Day Granular sand particles mixed with araldite to be pasted on L.S. each side to form interlocking Sundries L.S.

10.25 40.04 0.14

675.00 1.49 4145.53

0.033 25.74

5000.00 1.49

7.70 7.70 260.00

301.00 247.00 1.49

171.60

1.49 Total: 12624.81

Add water charges @ 1% on

Add C.P & OH @15% on 12751.06 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1466.37 Rs 1466.35

Item Code: 7.38.1.2 Stone tile work for wall lining:- 8 mm thick :- Raj Nagar/ Udaipur/ Zebra stone. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS : 8mm thick Raj Nagar white stone tile = 10.00sqm.+Add 2.5% westage = 0.25 sqm 7439 Total = 10.25sqm. sqm 10.25 9999 Carriage of Raj Nagar white stone tiles L.S. 40.04 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.14 (Rate as per item 3.8 of S.H. mortar) 0367 Cement slurry @ 3.3 kg/sqm. tonne 0.033 9999 Mortar for pointing in white cement L.S. 25.74 Labour for placing and fixing : 0123 Mason 1st class Day 7.70 0114 Beldar Day 7.70 9999 Granular sand particles mixed with araldite to be pasted on L.S. 260.00 each side to form interlocking 9999 Sundries L.S. 171.60 Add water charges @ 1% on

Rate

480.00 1.49 4145.53 5000.00 1.49 301.00 247.00 1.49 1.49 Total: 10626.06

Add C.P & OH @15% on 10732.32 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1234.22 Rs 1234.20

Item Code: 7.39 Extra for wall lining above 10 m hieght and 3 m or part. Code 9999

DSR-12

Description MATERIALS Scaffolding

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

L.S.

1.49

215.28

Page 197 of 2298

0123 0114 0101 9999

Mason 1st class Belder Bhisti Sundries

Day Day Day L.S.

0.30 0.30 0.15 28.60

Add water charges @ 1% on

301.00 247.00 260.00 1.49 Total: 566.78

Add C.P & OH @15% on 572.45 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 65.83 Rs 65.85

Item Code: 7.40.1 P/F dry cladding upto 10 m ht. with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size 1m x 1m, fixed to strutural steel frame work: Red sand stone.

Code

Details of Cost for : 3.00 Sqm Unit Quantity

Description

Rate

MATERIALSRed sand stoge = 3 X1.00 sqm = 3.00 sqm Add wastage 25% = 0.75 sqm total=3.75 Add 20% wastage infixing due to broken edge = 0.60 sqm

8683 1237 2216 9999 9999 9999 0126 0114 0114 9999 0116 0114 9999 9999

Total = 4.35 sqm Red sand stone gang saw cut 30mm thick. sqm Cutting marble or sand stone slab upto 50 mm thick by metre mechanical device Carriage of stone @ 2.30kg/cudm tonne backing rod L.S. Fixing including weather sealant and removing L.S. Double scafolding L.S. Mason (for ornamental stone work) 1 st class Day Beldar Day Labour for lifting stone Beldar Day Silicon gun/ pump etc. L.S. Labour for sealing Fitter (grade 1) Day Beldar Day Sundries L.S. Rubing and polishing vertical surface of stone L.S.

4.35 10.00

400.00 8.00

0.215 30.68 153.40 204.75 2.00 4.00

77.87 1.49 1.49 1.49 301.00 247.00

1.00 204.75

247.00 1.49

0.25 0.50 204.75 51.22

301.00 247.00 1.49 1.49 Total: 5138.33

Add water charges @ 1% on

Add C.P & OH @15% on 5189.71 Cost for 3.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1989.39 Rs 1989.40

Item Code: 7.40.2 P/F dry cladding upto 10 m ht. with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size 1m x 1m, fixed to strutural steel frame work: White sand stone.

Code

Description

Details of Cost for : 3.00 Sqm Unit Quantity

Rate

MATERIALS-

DSR-12

Page 198 of 2298

White sand stone = 3.00sqm Add wastage 25% = 0.75 sqm =3.75 sqm. Add 20% wastage infixing due to broken edge = 0.60 sqm

8684 1237 2216 9999 9999 9999 0126 0114 0114 9999 0116 0114 9999 9999

Total = 4.35 sqm White sand stone gang saw cut 30mm thick. sqm Cutting marble or sand stone slab upto 50 mm thick by metre mechanical device Carriage of stone @ 2.30kg/cudm tonne backing rod L.S. Fixing including weather sealant and removing L.S. Double scafolding L.S. Mason (for ornamental stone work) 1st class Day Beldar Day Labour for lifting stone Beldar Day Silicon gun/ pump etc. L.S. Labour for sealing Fitter (grade 1) Day Beldar Day Sundries L.S. Rubing and polishing vertical surface of stone cladding L.S.

4.35 10.00

435.00 8.00

0.215 30.68 153.40 204.75 2.00 4.00

77.87 1.49 1.49 1.49 301.00 247.00

1.00 204.75

247.00 1.49

0.25 0.50 204.75 51.22

301.00 247.00 1.49 1.49 Total: 5290.58

Add water charges @ 1% on

Add C.P & OH @15% on 5343.49 Cost for 3.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2048.34 Rs 2048.35

Item Code: 7.41 P/F structural steel frame (for dry cladding with 30 mm thick gang saw with machine cut eges sand stone)on walls at all heights using M.S. square/ retangular tube. Details of Cost for : 100.78 Kg Code Description Unit Quantity Rate Details of cost for 9 sqm or 110.78 kg. M.S. tube 50x25x18mm vertical=4x3.0=12.00m. Vertical=3x4x0.93=11.16m Total= 23.16m. Add 10% wastage = 2.32 Total 25.48 [email protected] kg/m=51.47 kg 4009 Mild steel tubes kilog 51.47 48.00 Angle iron 50x50x6mm 16x0.60=9.60 16x0.15=2.40 Total= 12.00 Add 10% wastage = 1.20m Total= 13.20m @4.50kg/m=59.40kg or 0.594 q 1007 Cost of angle iron quint 0.594 4250.00 Cement concrete 1:2:4 = 16x0.15x0.15x0.15=0.054 cum 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.331 4514.03 Coarse sand, 20mmstone a Making holes in brick work=16nos. LABOUR 0123 Mason 1st class Day 0.26 301.00

DSR-12

Page 199 of 2298

0124 0114

1215 0102 0100 0114 9999

13.052.01 9999

Mason 2nd class Beldar Welding for frame welding 16x(2.5+5+2.5+5) = 240 cm For hold fast 16x20cm = 320cm Total =560cm Welding by electric plant LABOUR Blacksmith 1 st class Bandhani Beldar Sundries Painting with epoxy paint over and including priming coat area 22.80x0.15 = 3.42 12x0.2=2.40 Total = 5.82sqm Finishing with Epoxy paint (two or more coats) appropriate priming coat, On steel work For labour scaffocaling etc

Day Day

0.26 2.00

273.00 247.00

cm

560.00

1.50

Day Day Day L.S.

1.34 0.67 4.92 80.73

301.00 260.00 247.00 1.49

5.82

105.51

80.73

1.49 Total: 8511.66

L.S.

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 8596.78 Cost for 100.78 Kg Rate per One Kg: Rate as per DSR-12:

Rs 119.02 Rs 119.00

Item Code: 7.42 P/F adjustable stainless steel cramps with stainless steel nuts and bolts etc. Code 8698

0103 0124 0114 9999 9999

Description Stainless steel cramps with nuts, bolts and washer for dry stone cladding . LABOUR for making holes, recesses etc. and fixing of stainless stul cramps Blacksmith 2nd class Mason 2nd class Beldar Scaffolding, hire charges of drill machine etc. Sundries

Details of Cost for : 10.00 Nos Unit Quantity each 10.00

Day Day Day L.S. L.S.

0.10 1.00 1.10 20.80 20.80

Add water charges @ 1% on

Rate 84.00

273.00 273.00 247.00 1.49 1.49 Total: 1473.98

Add C.P & OH @15% on 1488.72 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 171.20 Rs 171.20

Item Code: 8.1.1.1 Marble work for wall lining (veneer work) in CM 1:3 Raj Nagar marble upto 0.50 Sqm Details of Cost for : 0.50 Sqm Code Description Unit Quantity Finished work = 0.50sqm.+ Add for wastage @ 20% = 0.10 sqm. Total = 0.60 sqm.

DSR-12

Rate

Page 200 of 2298

7452 2216 03.008 03.015

0126 0100 0114 0115 0101 0128 0102 9999

Raj Nagar plain white marble (polished and machine cut) 18 sqm mm thick upto 0.50sqm Carriage of marble tonne Cement mortar 1:3 (1 cement : 3 coarse sand) Rate as per item No. 3.8 White cement mortar 1:2 (1 white cement : 2 marble LABOUR: For fixing Stone Mason (ornamental) Day Bandhani Day Beldar Day Coolie Day Bhishti Day Mate Day Blacksmith 1st class Day Scaffolding L.S.

0.60

610.00

0.03 0.008

77.87 4145.53

0.0012

9509.86

0.335 0.335 0.335 0.335 0.335 0.165 0.135 13.39

301.00 260.00 247.00 247.00 260.00 260.00 301.00 1.49 Total: 956.94

Add water charges @ 1% on

Add C.P & OH @15% on 966.51 Cost for 0.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2222.98 Rs 2222.90

Item Code: 8.1.1.2 Marble work for wall lining (veneer work) in CM 1:3 Raj Nagar marble upto 0.50 Sqm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Finished work = 1.00sqm.+ Add for wastage @ 20% = 0.20 sqm. Total = 1.20sqm. 7453 Raj Nagar plain white marble (Polished and machine cut) 18 sqm 1.20 mm thick above 0.50 sqm 2216 Carriage of marble tonne 0.06 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum 0.0144 (Rate as per item No. 3.8) 03.015 White cement mortar 1:2 (1 white cement : 2 marble Cum 0.0025 LABOUR: For fixing 0126 Stone Mason (ornamental) Day 0.67 0100 Bandhani Day 0.67 0114 Beldar Day 0.67 0115 Coolie Day 0.67 0101 Bhishti Day 0.67 0128 Mate Day 0.33 0102 Blacksmith 1st class Day 0.27 9999 Scaffolding L.S. 26.91 Add water charges @ 1% on

Rate

680.00 77.87 4145.53 9509.86

301.00 260.00 247.00 247.00 260.00 260.00 301.00 1.49 Total: 1992.36

Add C.P & OH @15% on 2012.28 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2314.12 Rs 2314.10

Item Code: 8.2.1.1

DSR-12

Page 201 of 2298

P/F 18mm thick for kitchen platforms etc over 20mm CM 1:4 Raj Nagar marble upto 0.50 Sqm Details of Cost for : 0.50 Sqm Code Description Unit Quantity Mirror polished Abu plain white = 0.50 sqm.+Wastage 5% 0.025 sqm. = 0.525 sqm 7452 Raj nagar plain white marble (polished and machine cut) 18 sqm 0.525 rnm. thick upto 0.50 sqm 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.012 LABOUR: 0123 Mason (brick layer) 1st class Day 0.70 0114 Beldar Day 0.325 0115 Coolie Day 0.325 9999 Moulding and edge polishing L.S. 39.00 9999 Sundries apoxy resin & cutting machine etc. L.S. 16.25 Add water charges @ 1% on

Rate

610.00 3485.41 301.00 247.00 247.00 1.49 1.49 Total: 815.65

Add C.P & OH @15% on 823.81 Cost for 0.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1894.76 Rs 1894.75

Item Code: 8.2.1.2 P/F 18mm thick for kitchen platforms etc over 20mm CM 1:4 Raj Nagar marble over 0.50 Sqm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Mirror polished Abu plain white = 1.00 sqm.+Wastage 5% 0.10 sqm.=1.05 sqm 7453 Raj nagar plain white marble (polished machine cut )18 mm sqm 1.05 thick above 0.50 sqm 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.024 LABOUR: 0123 Mason (brick layer) 1 class Day 1.40 0114 Beldar Day 0.65 0115 Coolie Day 0.65 9999 Moulding and edge polishing L.S. 78.00 9999 Sundries apoxy resin & cutting machine etc. L.S. 32.50 Add water charges @ 1% on

Rate

680.00 3485.41 301.00 247.00 247.00 1.49 1.49 Total: 1704.80

Add C.P & OH @15% on 1721.85 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1980.13 Rs 1980.80

Item Code: 8.2.2.1 P/F 18mm thick for kitchen platforms etc over 20mm CM 1:4 Granite Code

Description

Details of Cost for : 0.50 Sqm Unit Quantity

Rate

MATERIALS : Mirror polished granite= 0.50 sqm.+Wastage 5% 0.025 sqm.= 0.525 sqm 7295

DSR-12

Granite Black marble, 18 mm thick slab, above 0.2 sqm up to sqm 0.5 sqm (area wise)

0.525

1550.00

Page 202 of 2298

03.009 0123 0114 0115 9999

Cement mortar 1:4 (1 cement : 4 coarse sand). LABOUR : Mason (brick layer) 1st class Beldar Coolie Moulding and edge polishing

9999

Sundries apoxy resin & cutting machine etc.

Cum

0.012

3485.41

Day Day Day

0.70 0.325 0.325

301.00 247.00 247.00

L.S.

39.00

1.49

L.S.

16.25

1.49 Total: 1309.15

Add water charges @ 1% on

Add C.P & OH @15% on 1322.24 Cost for 0.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3041.16 Rs 3041.15

Item Code: 8.2.2.2 P/F 18mm thick for kitchen platforms etc over 20mm CM 1:4 Granite Code

Description

Details of Cost for : 2.00 Sqm Unit Quantity

Rate

MATERIALS: Mirror polished granite= 2.00 sqm.+Wastage 5%0.10sqm.= 2.10sqm 7297

Granite 18 mm thick slab, above 0.50 sqm

03.009 0123 0114 0115 9999

Cement mortar 1:4 (1 cement : 4 coarse sand). LABOUR: Mason (brick layer) 1st class Beldar Coolie Moulding and edge polishing

9999

Sundries apoxy resin & cutting machine etc.

sqm Cum

2.10 0.048

1640.00 3485.41

Day Day Day

2.80 1.30 1.30

301.00 247.00 247.00

L.S.

78.00

1.49

L.S.

65.00

1.49 Total: 5309.37

Add water charges @ 1% on

Add C.P & OH @15% on 5362.46 Cost for 2.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3083.42 Rs 3083.40

Item Code: 8.3.1 Extra for providing edge moulding to 18mm thick marble stone counters, vanities etc Marble work Details of Cost for : 10.00 m Code Description Unit Quantity LABOUR: 0019 Hand Grinder for-mirror-polish Day 1.50 0114 Beldar Day 2.00 9999 Sundries Blades & Polished etc. L.S. 78.00

DSR-12

Rate

Add water charges @ 1% on

200.00 247.00 1.49 Total: 910.22

Add C.P & OH @15% on

919.32

Page 203 of 2298

Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 105.72 Rs 105.70

Item Code: 8.3.2 Extra for providing edge moulding to 18mm thick _x000D_ Code 0019 0114 9999

Description Hand Grinder For mirror polish Beldar Sundries BLADES & Polish etc.,

Details of Cost for : 10.00 m Unit Quantity Day 2.50 Day 3.50 L.S.

117.00

Add water charges @ 1% on

Rate 200.00 247.00 1.49 Total: 1538.83

Add C.P & OH @15% on 1554.22 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 178.74 Rs 178.75

Item Code: 8.4 Extra for fixing marble/ granite stone in facia and drops of width upto 150mm with expoxy resin based Details of Cost for : 1.50 m Code Description Unit Quantity Details of cost for facia 1.5m long and 0.15m wide

0123 0115 9999 03.009

LABOUR: Mason 1st class Beldar Scaffolding, expoxy etc. Cement mortar 1:4 (1 cement : 4 coarse sand).

Day Day L.S. Cum

0.30 0.30 39.00 0.005

Add water charges @ 1% on

Rate

301.00 247.00 1.49 3485.41 Total: 239.94

Add C.P & OH @15% on 242.34 Cost for 1.50 m Rate per One Metre: Rate as per DSR-12:

Rs 185.79 Rs 185.80

Item Code: 8.5 Extra for providing opening of required size and shape for wash basins/kitchen sink Details of Cost for : 1.00 No. Code Description Unit Quantity 0126 Mason (for ornamental stone work) 1st class Day 0.40 0114 Beldar Day 0.40 9999 Sundries L.S. 15.30 Add water charges @ 1% on

Rate 301.00 247.00 1.49 Total: 242.00

Add C.P & OH @15% on 244.42 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 281.08 Rs 281.10

Page 204 of 2298

Item Code: 8.6 Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Details of cost for 10 sqm. LABOUR: 0013 Floor grinder machine (Granite) Day 1.00 0114 Beldar Day 2.50 0101 Bhishti Day 1.50 9999 Sundries grease, mop grinding stones etc. L.S. 65.00 Add water charges @ 1% on

Rate

300.00 247.00 260.00 1.49 Total: 1404.35

Add C.P & OH @15% on 1418.39 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 163.12 Rs 163.10

Item Code: 8.7.1 P/F cramps of required size and shape in RCC/CC backing with CM 1 : 2 CS i/c drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately) :- Gunmetal cramps.

Code

7338 9999 03.007 9999

Description Details of cost for one cramp MATERIALS: Gun Metal cramp 10x0.064x0.025x0.006 = 9.6x10^-5 10x0.025x0.025x0.006= 3.7x10^-5 =13.3x10^-5 Less Hole 10x0.024x0.010x0.006 = 1.4x10^-5 =11.90x10^-5 11.9x10^-5x8640 = 1.03 kg Add wastage @ 5% =0.051 kg =1.08 kg Gun metal cramp Carriage Cement mortar 1:2 (1 cement : 2 coarse) (Rate as per item No. 3.7) Labour for fixing in position

Details of Cost for : 1.03 Kg Unit Quantity

Rate

kilog L.S.

1.08 3.90 0.001

305.00 1.49 4863.86

L.S.

65.00

1.49 Total: 436.92

Add water charges @ 1% on

Add C.P & OH @15% on 441.29 Cost for 1.03 Kg Rate per One Kg: Rate as per DSR-12:

Rs 492.70 Rs 492.70

Item Code: 8.7.2 P/F cramps of required size and shape in RCC/CC backing with CM 1 : 2 CS i/c drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately) :- Stainless steel cramps. Details of Cost for : 0.934 Kg

DSR-12

Page 205 of 2298

Code

7339 9999 03.007 9999

Description Details of cost for one cramp MATERIALS: Stainless steel cramp 10x0.064x0.025x0.006 = 9.6x10^-5 10x0.025x0.025x0.006= 3.7x10^-5 =13.3x10^-5 Less Hole 10x0.024x0.010x0.006 = 1.4x10^-5 =11.90x10^-5 11.9x10^-5x7850 = 0.934 kg Add wastage @ 5% =0.047 kg =0.981 kg Stainless steel cramp Carriage Cement mortar 1:2 (1 cement : 2 coarse) (Rate as per item No. 3.7) Labour for fixing in position

Unit

Quantity

Rate

kilog L.S.

0.981 3.90 0.001

320.00 1.49 4863.86

L.S.

65.00

1.49 Total: 421.44

Add water charges @ 1% on

Add C.P & OH @15% on 425.65 Cost for 0.934 Kg Rate per One Kg: Rate as per DSR-12:

Rs 524.09 Rs 524.10

Item Code: 8.8.1.1 P/F expansion hold fasteners on CC/R.C.C. surface backing i/c drilling necessary holes and the cost of bolt etc. complete :- Wedge expansion type : Fastner with threaded dia. 6 mm.

Code

7430 1034 0116 0114 9999

Description Details of cost for 30nos. W.E.H. fastener Materials: Wedge expansion hold fastener size 6mm, 36.5mm length Bolt 6mm dia. Length (36.5+10mm) Labour: Fitter Grade-I Beldar Hire and running charges for hand drill

Details of Cost for : 30.00 Nos Unit Quantity

Rate

each

30.00

12.00

quint

0.0045

5400.00

Day Day L.S.

0.25 0.25 32.50

301.00 247.00 1.49 Total: 569.73

Add water charges @ 1% on

Add C.P & OH @15% on 575.43 Cost for 30.00 Nos Rate per Each: Rate as per DSR-12:

Rs 22.06 Rs 22.05

Item Code: 8.8.1.2 P/F expansion hold fasteners on CC/R.C.C. surface backing i/c drilling necessary holes and the cost of bolt etc. complete :- Wedge expansion type : Fastner with threaded dia. 10 mm.

Code

DSR-12

Description Details of cost for 30nos. W.E.H. fastener

Details of Cost for : 30.00 Nos Unit Quantity

Rate

Page 206 of 2298

7431 1034 0116 0114 9999

MATERIALS: Wedge expansion hold fastener size 10mm, 44.5mm length Bolt 10mm dia. Length (44.5+10mm) LABOUR: Fitter Grade-I Beldar Hire and running charges for hand drill

each

30.00

14.00

quint

0.006

5400.00

Day Day L.S.

0.25 0.25 32.50

301.00 247.00 1.49 Total: 637.83

Add water charges @ 1% on

Add C.P & OH @15% on 644.21 Cost for 30.00 Nos Rate per Each: Rate as per DSR-12:

Rs 24.69 Rs 24.70

Item Code: 8.8.1.3 P/F expansion hold fasteners on CC/R.C.C. surface backing i/c drilling necessary holes and the cost of bolt etc. complete :- Wedge expansion type : Fastner with threaded dia. 12 mm.

Code

7432 1034 0116 0114 9999

Description Details of cost for 30nos. W.E.H. fastener MATERIALS: Wedge expansion hold fastener size 12mm, 58.7mm length Bolt 12mm dia. Length (58.7+10mm) @ 0.05 kg./each LABOUR: Fitter Grade-I Beldar Hire and running charges for hand drill

Details of Cost for : 30.00 Nos Unit Quantity

Rate

each

30.00

26.00

quint

0.0075

5400.00

Day Day L.S.

0.25 0.25 32.50

301.00 247.00 1.49 Total: 1005.93

Add water charges @ 1% on

Add C.P & OH @15% on 1015.99 Cost for 30.00 Nos Rate per Each: Rate as per DSR-12:

Rs 38.95 Rs 38.95

Item Code: 8.9.1.1 Stone tile (polished) work for wall lining over 12 mm thick bed of CM 1: 3 CS :- 8 mm thick: Raj Nagar plain/ Udaipur green marble/ Zebra black marble. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate Details of cost for 1 sqm. 8mm thick marble tiles. Qty. = 1.00 sqm. + Add wastage @2.5% = 0.025 sqm Total = 1.025 sqm. 2751 8 mm thick marble tiles (polished) sqm 1.025 340.00 9999 Carriage of tiles L.S. 3.95 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.014 4145.53 (Rate as per item no. 3.8) 9999 Mortar for pointing L.S. 25.38 1.49 0367 Cement for slurry tonne 0.0033 5000.00 0123 Mason 1 st class Day 1.00 301.00 0114 Beldar Day 1.00 247.00

DSR-12

Page 207 of 2298

9999

Sundries etc.

L.S.

16.90

Add water charges @ 1% on

1.49 Total: 1039.93

Add C.P & OH @15% on 1050.33 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1207.88 Rs 1207.90

Item Code: 8.9.1.2 Stone tile (polished) work for wall lining over 12 mm thick bed of CM 1: 3 CS :- 8 mm thick: Granite of any colour and shade.

Code

2750 9999 03.008 9999 0367 0123 0114 9999

Description

Details of Cost for : 1.00 Sqm Unit Quantity

Details of cost for 1 sqm. 8mm thick Granite tiles. Qty. = 1.00 sqm. + Add wastage [email protected]% = 0.025sqm Total = 1.025 sqm. 8 mm thick granite stone tiles (mirror polished and of all sqm shades) Carriage of tiles L.S. Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item No. 3.8) Mortarr for pointing L.S. Cement for slurry tonne Mason 1st class Day Beldar Day Sundries etc. L.S.

Rate

1.025

675.00

3.95 0.014

1.49 4145.53

25.38 0.0033 1.00 1.00 16.90

1.49 5000.00 301.00 247.00 1.49 Total: 1383.31

Add water charges @ 1% on

Add C.P & OH @15% on 1397.14 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1606.71 Rs 1606.70

Item Code: 8.10.1 P/F stone slab table rubbed, edges rounded and polishe 75 x 50cm and 1.8cm thick in urinal partitions: White Agaria Marble stone.

Code

Description

Details of Cost for : 0.375 Sqm Unit Quantity

Rate

MATERIALS: Agaria Marble Stone 1 x 0.75 x0.50 = 0.375 + Add wastage @ 20% = 0.075 sqm. Total = 0.45sqm. 7244

9999

Table rubbed polished stone 18 mm thick (75x50cm) Agaria sqm Marble stone - 18 mm thick Cement concrete 1:2:4 for filling L.S. Labour for fixing, edge rounding and final POLISHING

9999

Sundries

9999

L.S. L.S.

0.45

1630.00

21.58

1.49

43.16 21.58

1.49 1.49 Total: 862.11

Add water charges @ 1% on

DSR-12

Page 208 of 2298

Add C.P & OH @15% on 870.73 Cost for 0.375 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2670.24 Rs 2670.75

Item Code: 8.10.2 P/F stone slab table rubbed, edges rounded and polishe 75 x 50cm and 1.8cm thick in urinal partitions: Granite Stone of approved shade. Details of Cost for : 0.375 Sqm Code Description Unit Quantity Rate Details of cost for one No or 0.375 sqm. MATERIALS :Granite Stone 1x0.75x0.50 = 0.375sqm.+ Add wastage @ 20% = 0.075 sqm Total = 0.45 sqm. 7245 Granite Stone sqm 0.45 1825.00 9999 Cement concrete 1:2:4 for fixing L.S. 21.58 1.49 9999 Labour for fixing, edge rounding and final polishing. L.S. 43.16 1.49 9999 Sundries L.S. 21.58 1.49 Total: Add water charges @ 1% on 949.86 Add C.P & OH @15% on 959.36 Cost for 0.375 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2942.03 Rs 2942.05

Item Code: 9.1.1 Providing wood work in frames of doors, windows, etc fixed in position : Second class teak wood Details of Cost for : 0.036 Cum Code Description Unit Quantity Rate MATERIALS: 1189 Second class teak wood (Scantling) cum 0.038 64000.00 Qty including 5% wasatage 2204 Carraige of Timber cum 0.038 100.11 LABOUR: 0156 Carpenter (average) Day 0.72 287.00 0114 Beldar Day 0.07 247.00 Total: Add water charges @ 1% on 2659.73 Add C.P & OH @15% on 2686.33 Cost for 0.036 Cum Rate per One Cum: Rate as per DSR-12:

Rs 85813.33 Rs 85813.30

Item Code: 9.1.2 Providing wood work in frames of doors, windows, etc fixed in position : Sal wood Details of Cost for : 0.036 Cum Code Description Unit Quantity Rate MATERIALS: 1199 Sal wood cum 0.038 50000.00 2204 Carraige of Timber cum 0.038 100.11

DSR-12

Page 209 of 2298

0156 0114

LABOUR: Carpenter (average) Beldar

Day Day

0.72 0.07

Add water charges @ 1% on

287.00 247.00 Total: 2127.73

Add C.P & OH @15% on 2149.01 Cost for 0.036 Cum Rate per One Cum: Rate as per DSR-12:

Rs 68648.89 Rs 68648.90

Item Code: 9.1.3 W/W in frames of doors, windows and other frames Kiln seasoned and chemically treated hollock wood. Details of Cost for : 0.036 Cum Code Description Unit Quantity Rate Details of cost for Chowkhat of a door 206.75x117.5cm MATERIALS Hollock wood 2x206.75x9.5x7.0cm =0.028cum+ 1x117.50x9.5x7.0cm = 0.008cum. = 0.036cum.+ Add for wastage @ 5% = 0.002cum. Grand Total = 0.038cum. 2466 Hollock wood cum 0.038 31000.00 2204 Carriage of timber cum 0.038 100.11 2504 Kiln seasoning of timber cum 0.038 680.00 9999 Chemical treatment L.S. 8.97 1.49 LABOUR: 0156 Carpenter (average) Day 0.72 287.00 0114 Beldar Day 0.07 247.00 Total: Add water charges @ 1% on 1444.94 Add C.P & OH @15% on 1459.39 Cost for 0.036 Cum Rate per One Cum: Rate as per DSR-12:

Rs 46619.44 Rs 46619.45

Item Code: 9.2 Providing laminated veneer lumber factory made doors, windows frames etc Details of Cost for : 0.036 Cum Code Description Unit Quantity Rate Details of cost for Chowkhat of a door 206.75x117.5cm MATERIALS: Hollock wood 2x206.75x9.5x7.0cm =0.028cum+ 1x117.50x9.5x7.0cm = 0.008cum. = 0.036cum.+ Add for wastage @ 5% = 0.002cum. Grand Total = 0.038cum. 7157 Laminated veneer lumber cum 0.038 66500.00 2204 Carraige of Timber cum 0.038 100.11 LABOUR 0111 Carpenter 1st class Day 0.20 301.00 0112 Carpenter 2nd class Day 0.20 273.00

DSR-12

Page 210 of 2298

0114

Beldar

Day

0.20

Add water charges @ 1% on

247.00 Total: 2695.00

Add C.P & OH @15% on 2721.95 Cost for 0.036 Cum Rate per One Cum: Rate as per DSR-12:

Rs 86951.11 Rs 86951.10

Item Code: 9.3.1 W/W in frames of false ceiling, partitions etc Sal wood . Code

1199 2204 0112 0114 9999

Description Details of cost for ceiling for a room 3x3m MATERIALS: Salwood = 6x3.30x(50/1000)x(125/1000)= 0.1238 cum. + Cross battens 60mm centre to center 38x50mm. 6x3x(38/1000)x(50/1000)=0.0342cum. = 0.1580 cum.+ Add for wastage @ 5% = 0.0079 cum. = 0.1659 cum. say 166 cudm. Salwood Carriage of timber LABOUR: Carpenter Ilnd Class Beldar Sundries screws etc.

Details of Cost for : 0.158 Cum Unit Quantity

Rate

cum cum

0.166 0.166

50000.00 100.11

Day Day L.S.

1.00 1.00 53.82

273.00 247.00 1.49 Total: 8916.81

Add water charges @ 1% on

Add C.P & OH @15% on 9005.98 Cost for 0.158 Cum Rate per One Cum: Rate as per DSR-12:

Rs 65549.87 Rs 65549.90

Item Code: 9.3.2 W/W in frames of false ceiling, partitions etc Kiln seasoned and chemically treated hollock wood. Details of Cost for : 0.158 Cum Code Description Unit Quantity Rate Details of cost for ceiling for a room 3x3m MATERIALS: Hollock wood = 6x3.30x(50/1000)x(125/1000)= 0.1238 cum. + Cross battens 60mm centre to center 38x50mm. 6x3x(38/1000)x(50/1000)=0.0342cum. = 0.1580 cum.+ Add for wastage @ 5% = 0.0079 cum. = 0.1659 cum. say 166 cudm. 2466 Hollock wood cum 0.166 31000.00 2204 Carriage of timber cum 0.166 100.11 2504 Kiln seasoning of timber cum 0.166 680.00 9999 Chemical treatment L.S. 18.20 1.49 LABOUR: 0112 Carpenter Ilnd Class Day 1.00 273.00 0114 Beldar Day 1.00 247.00

DSR-12

Page 211 of 2298

9999

Sundries screws etc.

L.S.

53.82

Add water charges @ 1% on

1.49 Total: 5902.81

Add C.P & OH @15% on 5961.84 Cost for 0.158 Cum Rate per One Cum: Rate as per DSR-12:

Rs 43393.16 Rs 43393.20

Item Code: 9.4.1 Extra for additional labour for circular works 2nd class teak wood Code

1189 2204 0156 0114

Description Details of cost for Chowkhat of a door 206.75x117.5cm Extra Materials and labour for wastage @ 10% on quantity of item no 9.1.1 MATERIALS : Second class teakwood Carriage of material (timber) LABOUR: Carpenter (avg.) Beldar

Details of Cost for : 0.036 Cum Unit Quantity

Rate

cum cum

0.0038 0.0038

64000.00 100.11

Day Day

0.072 0.007

287.00 247.00 Total: 265.97

Add water charges @ 1% on

Add C.P & OH @15% on 268.63 Cost for 0.036 Cum Rate per One Cum: Rate as per DSR-12:

Rs 8581.11 Rs 8581.10

Item Code: 9.4.2 Extra for additional labour for circular works Sal wood. Code

1199 2204 0156 0114

Description Details of cost for Chowkhat of a door 206.75x117.5cm Extra Materials and labour for wastage @ 10% on quantity of item no 9.1.2 MATERIALS : Sal wood in scantling Carriage of material (timber) LABOUR: Carpenter (avg.) Beldar

Details of Cost for : 0.036 Cum Unit Quantity

Rate

cum cum

0.0038 0.0038

50000.00 100.11

Day Day

0.072 0.007

287.00 247.00 Total: 212.77

Add water charges @ 1% on

Add C.P & OH @15% on 214.90 Cost for 0.036 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6865.00 Rs 6865.00

Item Code: 9.4.3

DSR-12

Page 212 of 2298

Extra for additional labour for circular works Kiln seasoned and chemically treated hollock wood. Details of Cost for : 0.036 Cum Code Description Unit Quantity Rate Details of cost for Chowkhat of a door 206.75x117.5cm Extra Materials and labour for wastage @ 10% on quantity of item no 9.1.3 MATERIALS : 2466 Hollock wood cum 0.0038 31000.00 2204 Carriage of timber cum 0.0038 100.11 2504 Kiln seasoning of timber cum 0.0038 680.00 9999 Chemical treatment L.S. 0.90 1.49 LABOUR: 0156 Carpentr I class Day 0.072 287.00 0114 Beldar Day 0.007 247.00 Total: Add water charges @ 1% on 144.49 Add C.P & OH @15% on 145.93 Cost for 0.036 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4661.67 Rs 4661.45

Item Code: 9.5.1.1 P/F panelled / panelled and glazed shutters for doors, windows etc excluding, panelling .. ..Second class teak wood ....35 mm thick shutters _x000D_ Details of Cost for : 2.16 Sqm Code Description Unit Quantity Rate Details of cost for shutters of a Door (l/3rd glazed and 2/3rd panelled) 200xl08cm = 2.16sqm) MATERIALS: Teak wood Styles 4x200x10.0x3.5cm = 0.028cum+ Rails Top rails1x110.5x3.5cm = 0.004cum.+ Bottom rails 1x110.5x20x3.5cm = 0.008cum+ Lock rails 1x110.5x15x3.5cm = 0.006cum+ Beading 2x186. 1x1. 9x1.2cm = 0.001cum. Total = 0.047 cum+ Add for wastage @ 10% = 0.005cum Grand Total = 0.051 cum. 1190 Teak wood cum 0.051 72000.00 2204 Carriage of timber cum 0.051 100.11 0595 Black enemelled M.S. Butt 10 No 6.00 80.00 hinges-100x5 8x1.9mm 0597 Black enemelled M.S. Butt 10 No 2.00 45.00 hinges-50x37xl.5mm 0637 M.S. Screws 40mm 100 N 48.00 50.00 0640 M.S. Screws 20mm 100 N 8.00 25.00 LABOUR: 0156 Carpenter (average) Day 1.83 287.00 0114 Beldar Day 0.76 247.00 9999 Sundries L.S. 35.88 1.49 Total: Add water charges @ 1% on 4526.50 Add C.P & OH @15% on

DSR-12

4571.77

Page 213 of 2298

Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2434.05 Rs 2434.05

Item Code: 9.5.1.2 P/F panelled / panelled and glazed shutters for doors, windows etc excluding, panelling .. ..Second class teak wood ....30 mm thick shutters Details of Cost for : 2.16 Sqm Code Description Unit Quantity Rate Details of cost for shutters of a Door (l/3rd glazed and 2/3rd panelled) 200x108cm = 2.16 sqm MATERIALS: Teak wood Styles : 4x200x10.0x3.0cm = 0.024 cum+ Top rails :1x110.5x9.5x3.0cm = 0.003cum+ Bottom rails: 1x110.5x19.7x3.0cm = 0.007cum+ Lockrails: 1x110.5xl5.0x3.0cm = 0.005cum+ Beading : 2x186.lxl.9x1.2cm = 0.001 cum. Total = 0.040 cum. + Add for wastage @ 10% = 0.004 cum. Grand Total = 0.044 cum. 1190 Teak wood cum 0.044 72000.00 2204 Carriage of timber cum 0.044 100.11 0595 Bright finished or black enamelled mild steel butt hinges 10 No 6.00 80.00 100x58x1.90 mm 0597 Bright finished or black enamelled mild steel 10 No 2.00 45.00 butthinges5Ox37x1.50 mm 0637 M.S. Screws 40mm 100 N 48.00 50.00 0640 M.S. Screws 20mm 100 N 8.00 25.00 LABOUR: 0156 Carpenter (avg) Day 1.83 287.00 0114 Beldar Day 0.76 247.00 9999 Sundries L.S. 35.88 1.49 Total: Add water charges @ 1% on 4021.79 Add C.P & OH @15% on 4062.01 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2162.64 Rs 2162.65

Item Code: 9.5.2.1 P/F Panelled or/and glazed shutters for doors etc Kiln seasoned and chemically treated hollock wood 35 mm thick

Code

DSR-12

Details of Cost for : 2.16 Sqm Description Unit Quantity Details of cost for shutters of a Door (l/3rd glazed and 2/3rd panelled) 200x108cm = 2.16 sqm MATERIALS: Hollock wood Styles 4x200x10.0x3.5cm = 0.028cum+ Rails Top rails 1x110.5x10.0x3.5cm = 0.004cum.+ Bottom rails 1x110.5x20.0x3.5cm = 0.008cum+

Rate

Page 214 of 2298

2505 2204 2504 9999 0595 0597 0637 0640 0156 0114 9999

Lock rails 1x110.5x15.00x3.5cm = 0.006cum+ Beading2xl86.1xl.9xl.2cm = 0.001cum. Total = 0.047 cum+ Add for wastage @ 10% = 0.005cum Grand Total = 0.051 cum. Hollock wood Carriage of timber Kiln seasoning Chemical treatment Black enamelled M.S. Butt hinges-100x58xl.9mm Black enamelled M.S. Butt hinges-50x37xl .5mm M.S. Screws 40mm M.S. Screws 20mm LABOUR: Carpenter (Avg.) Beldar Sundries

cum cum cum L.S. 10 No 10 No 100 N 100 N

0.051 0.051 0.051 9.10 6.00 2.00 48.00 8.00

35000.00 100.11 680.00 1.49 80.00 45.00 50.00 25.00

Day Day L.S.

1.83 0.76 35.88

287.00 247.00 1.49 Total: 2687.74

Add water charges @ 1% on

Add C.P & OH @15% on 2714.62 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1445.28 Rs 1445.30

Item Code: 9.5.2.2 P/F Panelled or/and glazed shutters for doors etc Kiln seasoned and chemically treated hollock wood 30 mm thick

Code

2505 2204 2504 9999 0595 0597 0637 0640 0156 0114 9999

Details of Cost for : 2.16 Sqm Description Unit Quantity Details of cost for shutters of a door (l/3rd glazed and 2/3rd panelled) 200xl08cm = 2.16sqm. MATERIALS: Hollock wood Styles 4x200xl0.0x3.0cm = 0.024cum+ Rails Top rails 1x110.5x9.50x3.0cm = 0.003cum.+ Lock rails 1x110.5x15.0x3.0cm = 0.005cum+ Bottom rails 1x110.5xl9.7x3.0cm = 0.007cum+ Beading2xl86.1xl.9xl.2cm = 0.001cum Total = 0.040 cum.+ Add for wastage @ 10% = 0.004cum Grand Total = 0.044 cum or = 44 cudm Hollock wood cum 0.044 Carriage of timber cum 0.044 Kiln seasoning cum 0.044 Chemical treatment L.S. 9.10 Black enemelled M.S. Butt hinges-100x58xl.9mm 10 No 6.00 Black enemelled M.S. Butt hinges-50x37xl .5mm 10 No 2.00 M.S. Screws 40mm 100 N 48.00 M.S. Screws 20mm 100 N 8.00 LABOUR: Carpenter (Avg.) Day 1.83 Beldar Day 0.76 Sundries L.S. 35.88 Add water charges @ 1% on

DSR-12

Rate

35000.00 100.11 680.00 1.49 80.00 45.00 50.00 25.00 287.00 247.00 1.49 Total: 2437.27

Page 215 of 2298

Add C.P & OH @15% on 2461.64 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1310.60 Rs 1310.60

Item Code: 9.5.3.1 P/F panelled or panelled and glazed shutters for doors, windows etc ISI marked M.S. pressed butt hinges excluding, panelling - Kiln seasoned selected planks of sheesham wood - 35mm thick

Code

Details of Cost for : 2.16 Sqm Unit Quantity

Description

Rate

0637

Sheesham wood: Styles 4x2.00x0.10x0.035 m = 0.028 cum + Rails Top rails: 1 x 1.105 x 0.10x0.035 m = 0.004 cum + Lock rails: 1 x 1.105 x 0.15x0.035 m = 0.006 cum + Bottom rail = 1x1.105x0.20x0.035m= 0.008 cum+ Beading 2x0.861x0.019x0.012 m = 0.001 cum Total = 0.047 cum Add wastage @ 10% = 0.005 cum Grand Total = 0.051 cum or 51 cudm Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0156 0114

Carpenter (average) Beldar LABOUR: Carriage

Day Day

1.83 0.76

287.00 247.00

L.S.

35.88

1.49 Total: 4204.18

1200 2204 2504 0595 0597

9999

Cum cum cum 10 No

0.051 0.051 0.051 6.00

65000.00 100.11 680.00 80.00

10 No

2.00

45.00

100 N

48.00

50.00

Add water charges @ 1% on

Add C.P & OH @15% on 4246.22 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2260.72 Rs 2260.70

Item Code: 9.5.3.2 P/F panelled or panelled and glazed shutters for doors, windows etc ISI marked M.S. pressed butt hinges excluding, panelling - Kiln seasoned selected planks of sheesham wood - 30mm thick

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

Sheesham wood: Styles 4x2.00x0.10x0.030 m = 0.024 cum + Rails Top rails: 1 x 1.105 x 0.095x0.030 m = 0.003 cum + Lock rails: 1 x 1.105 x 0.15x0.030 m = 0.005 cum +

DSR-12

Page 216 of 2298

0637

Bottom rail : 1 x 1.105 x 0.197x0.030 m = 0.006 cum Beading 2x0.861x0.019x0.012 m = 0.001 cum Total = 0.04 cum Add for wastage @ 10% = 0.004 cum Grand Total : 0.044 cum or 44 cudm Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Bright finished or black enameled mild steel butt hinges75x47x1.70 mm Bright finished or black enameled mild steel screws 40 mm

0156 0114 9999

LABOUR: Carpenter (average) Beldar Carriage

1200 2204 2504 0596

Cum cum cum 10 No

0.044 0.044 0.044 6.00

65000.00 100.11 680.00 60.00

100 N

48.00

50.00

Day Day L.S.

1.83 0.76 35.88

287.00 247.00 1.49 Total: 3720.71

Add water charges @ 1% on

Add C.P & OH @15% on 3757.92 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2000.75 Rs 2000.75

Item Code: 9.6.1 P/F 35mm thick factory made laminated veneer lumber door shutter 12mm thick plain Grade-1, medium density flat pressed 3 layer or graded particle board (FPT-1) Details of Cost for : 2.38 Sqm Code Description Unit Quantity Rate Details of cost of one shutter 220xl08cm = 2.38sqm. MATERIALS: Factory made shutters LVL syles, rails and panels 7137 Plain particle board sqm 2.38 1780.00 9999 Carriage of shutters L.S. 29.64 1.49 Fittings: 0595 Black enamelled M.S. Butt hinges-100x58x 1.9mm 10 No 6.00 80.00 0597 Black enamelled M.S. Butt hinges-50x37xl.5 10 No 2.00 45.00 0637 M.S. Screws 40mm 100 N 48.00 50.00 0640 M.S. Screws 20mm 100 N 8.00 25.00 LABOUR: 0156 Carpenter Average Day 0.52 287.00 0114 Beldar Day 0.60 247.00 9999 Sundries L.S. 35.88 1.49 Total: Add water charges @ 1% on 4714.46 Add C.P & OH @15% on 4761.60 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2300.77 Rs 2300.75

Item Code: 9.6.2 P/F 35mm thick factory made laminated veneer lumber door shutter 12mm thick pre-laminated decorative lamination on both sides) particle board Grade-1 medium density flat pressed, 3 layer and graded (FPT-1)

DSR-12

Page 217 of 2298

Code

7139 9999 0595 0597 0637 0640 0156 0114 9999

Details of Cost for : 2.38 Sqm Description Unit Quantity Details of cost of one shutter 220xl08cm = 2.38sqm. Materials: Factory made shutters LVL styles, rails and panels Factory made 35 mm thick shutters with laminated veneer sqm 2.38 lumber styles rails as per TADS IS Carriage of shutters L.S. 29.64 Fittings: Black enamelled M.S. Butt 10 No 6.00 hinges-100x58x 1.9mm Black enamelled M.S. Butt hinges-50x37xl.5 10 No 2.00 M.S. Screws 40mm 100 N 48.00 M.S. Screws 20mm 100 N 8.00 Labour: Carpenter Average Day 0.52 Beldar Day 0.60 Sundries L.S. 35.88 Add water charges @ 1% on

Rate

1930.00 1.49 80.00 45.00 50.00 25.00 287.00 247.00 1.49 Total: 5071.46

Add C.P & OH @15% on 5122.17 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2475.00 Rs 2475.00

Item Code: 9.6.3 P/F 35mm thick factory made laminated veneer lumber door shutter 12mm thick pre-laminated (decorative lamination on one side & other side balancing) Grade-1, medium density flat pressed, 3 layer & graded (FPT-1)

Code

7143 9999 0595 0597 0637 0640 0156 0114 9999

Details of Cost for : 2.38 Sqm Description Unit Quantity Details of cost of one shutter 220xl08cm = 2.38sqm. MATERIALS: Factory made shutters LVL syles, rails and panels Factory made 35 mm thick shutters with laminated veneer sqm 2.38 lumber styles rails as per TADS IS Carriage of shutters L.S. 29.64 FITTINGS: Black enamelled M.S. Butt hinges-100x58x 1.9mm 10 No 6.00 Black enamelled M.S. Butt hinges-50x37xl.5 10 No 2.00 M.S. Screws 40mm 100 N 48.00 M.S. Screws 20mm 100 N 8.00 LABOUR: Carpenter Average Day 0.52 Beldar Day 0.60 Sundries L.S. 35.88 Add water charges @ 1% on

Rate

1850.00 1.49 80.00 45.00 50.00 25.00 287.00 247.00 1.49 Total: 4881.06

Add C.P & OH @15% on 4929.87 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 2382.08 Rs 2382.10

Page 218 of 2298

Item Code: 9.7.1 P/F panelling or panelling and glazing for panelled shutters for doors, windows etc - Second class teak wood.

Code

1190 2204 0111 9999

Details of Cost for : 0.66 Sqm Description Unit Quantity Details of cost for shutters of a door with 2/3rd panelling...200x 108cm = 2.16sqm. Panel area = 4x45.1x36.55cm = 0.66sqm MATERIALS: Panels 4x47.2x38.65xl.6cm = 0.0117cum+ Add for wastage @ 10% = 0.0012cum. = 0.0129 cum. Second class teak wood cum 0.0129 Carriage of timber cum 0.0129 LABOUR: Carpenter 1st class Day 0.57 Sundries L.S. 4.42 Add water charges @ 1% on

Rate

72000.00 100.11 301.00 1.49 Total: 1108.25

Add C.P & OH @15% on 1119.33 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1950.35 Rs 1950.35

Item Code: 9.7.2 P/F panelling or panelling and glazing for panelled shutters for doors, windows etc - Kiln seasoned and chemically treated Hollock wood . Details of Cost for : 0.66 Sqm Code Description Unit Quantity Rate MATERIALS: Hollock wood panels 4x45.1x36.55cm = 0.0117 cum+ Add for wastage @ 10% = 0.0012cum. = 0.0129 cum. 2505 Hollock wood cum 0.0129 35000.00 2204 Carriage of timber cum 0.0129 100.11 2504 Kiln seasoning cum 0.0129 680.00 9999 Chemical treatment L.S. 8.97 1.49 Labour & sundries 0111 Carpenter 1 st class Day 0.57 301.00 9999 Sundries L.S. 4.42 1.49 Total: Add water charges @ 1% on 653.09 Add C.P & OH @15% on 659.62 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1149.33 Rs 1149.35

Item Code: 9.7.3.1 P/F panelling or panelling and glazing for panelled door shutters etc - 9mm ply - Decorative veneer on both sides. Details of Cost for : 0.66 Sqm

DSR-12

Page 219 of 2298

Code

Description Plywood (9mm thick) 4x47.2x38.65cm = 0.73sqm Add wastage @ 10% = 0.07 -------------= 0.80sqm

Unit

Quantity

Rate

2480 9999 0111 9999

Ply wood 5 ply with teak ply on both faces 9 mm thick Carriage of ply wood Carpenter I class Sundries

sqm L.S. Day L.S.

0.80 1.82 0.57 4.42

960.00 1.49 301.00 1.49 Total: 948.87

Add water charges @ 1% on

Add C.P & OH @15% on 958.36 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1669.86 Rs 1669.85

Item Code: 9.7.3.2 P/F panelling or panelling and glazing for panelled door shutters etc - 9mm ply - decorative veneer on one side and commr veneer on other side. Details of Cost for : 0.66 Sqm Code Description Unit Quantity Rate Plywood (9mm thick) 4x47.2x38.65cm = 0.73sqm Add wastage @ 10% = 0.07 -------------= 0.80sqm 2481 9999 0111 9999

Ply wood 5 ply with teak ply on one face and commercial ply on another face 9 mm thick Carriage of ply wood Carpenter I class Sundries

sqm

0.80

775.00

L.S. Day L.S.

1.82 0.57 4.42

1.49 301.00 1.49 Total: 800.87

Add water charges @ 1% on

Add C.P & OH @15% on 808.88 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1409.41 Rs 1409.40

Item Code: 9.7.4.1 P/F panelling or panelling and glazing for panelled door shutters etc - 9mm 7ply - One side decorative veneering.

Code

Description

Details of Cost for : 0.66 Sqm Unit Quantity

Rate

MATERIALS: Plywood (9mm thick) 4x47.2x38.65cm = 0.73sqm Add wastage @ 10% = 0.07 sqm Total = 0.80sqm 2483 9999 0111

DSR-12

Ply wood 7 ply with teak ply on one face and commercial ply sqm on another face 9 mm thick Carriage of ply wood L.S. Carpenter I class Day

0.80

845.00

1.82 0.57

1.49 301.00

Page 220 of 2298

9999

Sundries

L.S.

4.42

Add water charges @ 1% on

1.49 Total: 856.87

Add C.P & OH @15% on 865.44 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1507.97 Rs 1507.95

Item Code: 9.7.5.1 P/F panelling or panelling and glazing for panelled door shutters etc - 12mm MDF particle board. Details of Cost for : 0.66 Sqm Code Description Unit Quantity Plywood (9mm thick) 4x47.2x38.65cm = 0.73sqm Add wastage @ 10% = 0.07 -------------= 0.80sqm 0341 9999 0111 9999

Flat pressed 3layer particle board : 12 mm thick Carriage of ply wood Carpenter I class Sundries

sqm L.S. Day L.S.

0.80 1.82 0.57 4.42

Add water charges @ 1% on

Rate

325.00 1.49 301.00 1.49 Total: 440.87

Add C.P & OH @15% on 445.28 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 775.86 Rs 775.85

Item Code: 9.7.5.2 P/F Panelling or panelling and glazing in shutters (25 mm to 40 mm thick) Particle board 12mm thick veneered particle board with commercial veneering on both face Details of Cost for : 0.66 Sqm Code Description Unit Quantity Rate Details of cost for shutters of a door with 2/3rd panelling.. .200x108cm = 2.16sqm. Panel area = 4x45.1x36.55cm = 0.66sqm. MATERIALS: Particle board 4x47.2x38.65cm = 0.73sqm+ Add for wastage @ 10% = 0.07sqm. 7468 Total = 0.80 sqm. sqm 0.80 480.00 9999 Carriage of Plywood L.S. 1.82 1.49 LABOUR: 0111 Carpenter 1st class Day 0.57 301.00 9999 Sundries L.S. 4.42 1.49 Total: Add water charges @ 1% on 564.87 Add C.P & OH @15% on 570.52 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 994.09 Rs 994.10

Page 221 of 2298

Item Code: 9.7.5 .3 P/F panelling or panelling and glazing for panelled door shutters etc - 12mm prelaminated particle board - one side laminated. Details of Cost for : 0.66 Sqm Unit Quantity

Code

Description Plywood (9mm thick) 4x47.2x38.65cm = 0.73sqm Add wastage @ 10% = 0.07 -------------= 0.80sqm

7477

12mm thick - Prelaminated particle board with one side sqm decorative and other side balancing Carriage of ply wood L.S. Carpenter I class Day Sundries L.S.

9999 0111 9999

Rate

0.80

690.00

1.82 0.57 4.42

1.49 301.00 1.49 Total: 732.87

Add water charges @ 1% on

Add C.P & OH @15% on 740.20 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1289.74 Rs 1289.75

Item Code: 9.7.5.4 P/F panelling or panelling and glazing for panelled door shutters etc - 12mm prelaminated particle board - both sides laminated.

Code

7480 9999 0111 9999

Description 12mm prelaminated board both 4x47.2x38.65cm = 0.73sqm Add wastage @ 10% = 0.07 -------------= 0.80sqm

Details of Cost for : 0.66 Sqm Unit Quantity side

Rate

laminated

12mm thick prelaminated particle board - Grade-I - Both side laminated Carriage of particle board Carpenter I class Sundries

sqm

0.80

720.00

L.S. Day L.S.

1.82 0.57 4.42

1.49 301.00 1.49 Total: 756.87

Add water charges @ 1% on

Add C.P & OH @15% on 764.44 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1331.98 Rs 1332.00

Item Code: 9.7.6.1 P/F panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows etc - for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Coir Veneer Board - 12mm thick

Code

Description

Details of Cost for : 0.66 Sqm Unit Quantity

Rate

MATERIALS: Coir Veneer Board 12mm thick 4x47.2x38.65 cm =0.73 sqm

DSR-12

Page 222 of 2298

Add wastage @ 10% =0.07 sqm Total = 0.80sqm 7555 9999 0111 9999

Coir veneered board 12mm thick Carriage Carpenter 1st class Sundries

sqm L.S. Day L.S.

0.80 1.82 0.57 4.42

Add water charges @ 1% on

622.00 1.49 301.00 1.49 Total: 678.47

Add C.P & OH @15% on 685.25 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1194.00 Rs 1194.00

Item Code: 9.7.7.1 P/F panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows etc - for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Float glass panes - 4mm thick

Code

Details of Cost for : 0.66 Sqm Unit Quantity

Description

Rate

MATERIALS: Qty of glass panes 4x47.2x38.65 cm =0.73 sqm Add wastage @ 10% =0.07 sqm Total = 0.80sqm 2406 9999 0156 0119 0114 9999

Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Carriage Carpenter (average) Glazier Beldar Sundries

sqm

0.80

310.00

L.S. Day Day Day L.S.

1.82 0.57 0.15 0.15 25.47

1.49 287.00 273.00 247.00 1.49 Total: 530.25

Add water charges @ 1% on

Add C.P & OH @15% on 535.55 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 933.15 Rs 919.25

Item Code: 9.7.7.2 P/F panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows etc - for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Float glass panes - 5.5mm thick

Code

Description

Details of Cost for : 0.66 Sqm Unit Quantity

Rate

MATERIALS: Qty of glass panes 4x47.2x38.65 cm =0.73 sqm Add wastage @ 10% =0.07 sqm Total = 0.80sqm 2407

DSR-12

Float glass sheet of nominal thickness 5.5 mm.(weight not less sqm than 13.50 kg/sqm).

0.80

450.00

Page 223 of 2298

9999 0156 0119 0114 9999

Carriage Carpenter (average) Glazier Beldar Sundries

L.S. Day Day Day L.S.

1.82 0.57 0.15 0.15 25.47

Add water charges @ 1% on

1.49 287.00 273.00 247.00 1.49 Total: 642.25

Add C.P & OH @15% on 648.67 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1130.26 Rs 1113.40

Item Code: 9.7.8 P/F panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows etc - for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 m

Code

Description

Details of Cost for : 0.66 Sqm Unit Quantity

Rate

MATERIALS: Qty of wire guage 4x47.2x38.65 cm =0.73 sqm Add wastage @ 10% =0.07 sqm Total = 0.80sqm 8737 9999 0112 9999

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Carriage L.S. Carpenter 2nd class Day Sundries L.S.

0.80

760.00

1.82 0.57 4.42

1.49 273.00 1.49 Total: 772.91

Add water charges @ 1% on

Add C.P & OH @15% on 780.64 Cost for 0.66 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1360.21 Rs 1339.90

Item Code: 9.9.1.1 P/F glazed shutters for doors, windows etc using 4mm float glass panes, black enamelled M.S butt hinges, screws etc - Second class teak wood - 35 mm thick Details of Cost for : 2.16 Sqm Code Description Unit Quantity Rate Details of cost for shutter of a door (glazed) 200xl08cm = 2.16 sqm. MATERIALS : (i) Teak wood (2nd class) Styles : 4x200x9.5x3.5cm = 0.027cum Rails Top & intermediate rails 2x110.5x9.5x3.5cm = 0.008cum Lock and bottom rails 2x110.5xl9.7x3.5cm = 0.015cum Beadings2x186.1x1.9x1.2cm = 0.001cum

DSR-12

Page 224 of 2298

1190 2406 0595 0597 0637 0640 2204 0156 0119 0114 9999

4x 171.70x 1.9x 1.2cm = 0.002cum. Total = 0.053 cum. Add for wastage @ 10% = 0.005cum. Grand Total = 0.058 cum. Teak wood (2nd Class) (ii) Float glasses 4.0mm thick (iii) Black enamelled M.S. butt hinges-100x58x1.90mm Black enamelled M.S. butt hinges-50x37xl .50mm M.S. Screws 40mm M.S. Screws 20mm Carriage of Timber LABOUR: Carpenter (Avg.) Glazier Beldar Sundries

cum sqm 10 No 10 No 100 N 100 N cum

0.058 1.27 6.00 2.00 48.00 8.00 0.058

72000.00 310.00 80.00 45.00 50.00 25.00 100.11

Day Day Day L.S.

1.83 0.23 0.77 40.43

287.00 273.00 247.00 1.49 Total: 5496.94

Add water charges @ 1% on

Add C.P & OH @15% on 5551.91 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2955.88 Rs 2955.90

Item Code: 9.9.1.2 P/F Glazed shutters using (4mm thick) glass panes 2nd class teak wood 30 mm thick Details of Cost for : 2.16 Sqm Code Description Unit Quantity Details of cost for shutter of a door (glazed) 200x108cm = 2.16 sqm. MATERIALS : (i) Teak wood Styles : 4x200x9.5x3.0cm = 0.023cum+ Rails Top & intermediate rails 2x110.5x9.5x3.0cm = 0.006cum+ Lock and bottom rails 2x110.5x19.7x3.0cm = 0.013cum+ Beadings2x186.1xl.9xl.2cm = 0.001cum+ 4x 171.70x 1.9x 1.2cm = 0.002cum. Total = 0.045 cum.+ Add for wastage @ 10% = 0.005cum. Grand Total = 0.050 cum. 1190 Teak wood cum 0.05 2406 (ii) Float glasses 4.0mm thick sqm 1.27 0595 (iii) Black enamelled M.S. butt 10 No 6.00 hinges-100x58x1.90mm 0597 Black enamelled M.S. butt 10 No 2.00 hinges-50x3 7x 1.50mm 0637 M.S. Screws 40mm 100 N 48.00 0640 M.S. Screws 20mm 100 N 8.00 2204 (iv) Carriage of timber cum 0.05 LABOUR: 0156 Carpenter (Avg.) Day 1.83 0119 Glazier Day 0.23 0114 Beldar Day 0.77 9999 Sundries L.S. 40.43

DSR-12

Rate

72000.00 310.00 80.00 45.00 50.00 25.00 100.11 287.00 273.00 247.00 1.49

Page 225 of 2298

Add water charges @ 1% on

Total: 4920.14

Add C.P & OH @15% on 4969.34 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2645.71 Rs 2645.70

Item Code: 9.9.2.1 P/F Glazed shutters using (4mm thick) glass panes Kiln seasoned and chemically treated hollock wood : 35 mm thick.

Code

Description Details of cost for shutter of a door (glazed) 200x108cm = 2.16 sqm. MATERIALS : (i) Hollock wood Styles : 4x200x9.5x3.5cm = 0.027 cum+ Rails Top & intermediate rails 2x110.5x9.5x3.50cm = 0.008cum+ Lock and bottom rails 2x110.5x19.7x3.50cm = 0.015cum+ Beadings2xl86.1x1.9x1.2cm = 0.001cum+ 4x 171.70x 1.9x 1.2cm = 0.002cum. Total = 0.053 cum.+ Add for wastage @ 10% = 0.005cum. Grand Total = 0.058 cum or = 58 cudm

2505 2504 9999 2406 0595

Hollock wood (ii) Kiln seasoning (iii) Chemical treatment (iv) Float glassess 4.0 mm thick (v) Black enamelled M.S. Butt Black enamelled M.S. butt hinges 50x37x 1.50mm M.S. Screws 40mm M.S. Screws 20mm (iv) Carriage of timber LABOUR: Carpenter (Avg.) Glazier Beldar Sundries

0597 0637 0640 2204 0156 0119 0114 9999

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

cum cum L.S. sqm 10 No

0.058 0.058 9.10 1.27 6.00

35000.00 680.00 1.49 310.00 80.00

10 No 100 N 100 N cum

2.00 48.00 8.00 0.058

45.00 50.00 25.00 100.11

Day Day Day L.S.

1.83 0.23 0.77 40.43

287.00 273.00 247.00 1.49 Total: 3403.94

Add water charges @ 1% on

Add C.P & OH @15% on 3437.98 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1830.41 Rs 1830.40

Item Code: 9.9.2.2 P/F Glazed shutters using (4mm thick) glass panes Kiln seasoned and chemically treated hollock wood : 30 mm thick.

DSR-12

Page 226 of 2298

Code

2505 2504 9999 2406 0595 0597 0637 0640 2204 0156 0119 0114 9999

Description Details of cost for shutter of a door (glazed) 200x108cm = 2.16 sqm. MATERIALS : (i) Hollock wood Styles : 4x200x9.50x3.0cm = 0.023cum+ Rails Top & intermediate rails 2x110.5x9.50x3.0cm = 0.006cum+ Lock and bottom rails 2x110.5x19.70x3.0cm = 0.013cum+ Beadings2x186.1x1.9x1.2cm = 0.001cum+ 4x 171.70x 1.9x 1.2cm = 0.002cum. Total = 0.045 cum.+ Add for wastage @ 10% = 0.005cum. Grand Total = 0.050 Hollock wood (ii) Kiln seasoning (iii) Chemical treatment (iv) Float glassess 4.0 mm thick (v) Black enamelled M.S. Butt hinges 100x58x1.90mm Black enamelled M.S. butt hinges 50x37x 1.50mm M.S. Screws 40mm M.S. Screws 20mm (iv) Carriage of timber LABOUR: Carpenter (Avg.) Glazier Beldar Sundries

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

cum cum L.S. sqm 10 No 10 No 100 N 100 N cum

0.05 0.05 9.10 1.27 6.00 2.00 48.00 8.00 0.05

35000.00 680.00 1.49 310.00 80.00 45.00 50.00 25.00 100.11

Day Day Day L.S.

1.83 0.23 0.77 40.43

287.00 273.00 247.00 1.49 Total: 3117.70

Add water charges @ 1% on

Add C.P & OH @15% on 3148.88 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1676.49 Rs 1676.50

Item Code: 9.9.3.1 P/F glazed shutters for doors, windows etc., using 4 mm thick float glass panes , M.S. pressed butt hinges - Kiln seasoned selected planks of sheesham wood - 35mm thick Details of Cost for : 2.16 Sqm Code Description Unit Quantity Rate MATERIALS: (i) Hollock Wood Styles : 4 x200 x 9.53 x 3.5 cm = 0.27 cum + Rails : Top & Intermediate rails : 2 x 110.5 x 10 x 3.5 cm = 0.008 cum + Lock and Bottom rails 2 x 110.5 x 19.7 x 3.5 cm = 0.015 cum + Beadings 2x186.1x1.9x1.2cm = 0.002 cum Total = 0.053 cum Add wastage @ 10% = 0.005 cum Grand Total = 0.058 cum or 58 cudm

DSR-12

Page 227 of 2298

1200 2504 2204 2406

Cum cum cum sqm

0.058 0.058 0.058 1.27

65000.00 680.00 100.11 310.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Kiln seasoned selected sheesum wood planks Kiln seasoning of timber Carraige of Timber Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0156 0119 0114 9999

LABOUR: Carpenter (average) Glazier Beldar Sundries

Day Day Day L.S.

1.83 0.23 0.77 40.43

287.00 273.00 247.00 1.49 Total: 5130.38

0595 0597

Add water charges @ 1% on

Add C.P & OH @15% on 5181.68 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2758.76 Rs 2758.75

Item Code: 9.9.3.2 P/F glazed shutters for doors, windows etc using 4mm glass panes M.S. pressed butt hinges - Kiln seasoned selected planks of sheesham wood - 30mm thick Details of Cost for : 2.16 Sqm Code Description Unit Quantity Rate Sheesham wood: Styles 4x200x9.5x3 cm = 0.023 cum + Rails Top & intermediate rails 2 x 110.5 x 9.5x3 cm = 0.006 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3 cm = 0.013 cum +

0637

Beading 2x.186.1x1.9x1.2 cm = 0.002 cum Total = 0.045 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.05 cum or 50 cudm Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0156

LABOUR: Carpenter (average)

Day

1.83

287.00

1200 2204 2504 2406 0595 0597

DSR-12

Cum cum cum sqm

0.05 0.05 0.05 1.27

65000.00 100.11 680.00 310.00

10 No

6.00

80.00

10 No

2.00

45.00

100 N

48.00

50.00

Page 228 of 2298

0119 0114 9999

Glazier Beldar Sundries

Day Day L.S.

0.23 0.77 40.43

Add water charges @ 1% on

273.00 247.00 1.49 Total: 4604.14

Add C.P & OH @15% on 4650.18 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2475.79 Rs 2475.80

Item Code: 9.10.1 P/F factory made laminated veneer lumber glazed shutter conforming IS: 14616 to TADS 15:2001,using 4mm thick float glass panes for doors,windows i/c black enamelled M.S. butt hinges with necessary screws: 30 mm thick shutters.

Code

7151 9999 0595 0597 0637 0640 0156 0114 9999

Description Details of cost of one shutter 220x108cm = 2.38sqm. MATERIALS: Factory, made shutters glazed laminated veneer lumber door shutter Carriage of shutters Fittings: Black enamelled M.S. butt hinges 100x58x1.90mm Black enamelled M.S. butt hinges 50x37x 1.50mm M.S. Screws-40mm M.S. Screws-20mm LABOUR: Carpenter (Avg.) Beldar Sundries

Details of Cost for : 2.38 Sqm Unit Quantity

Rate

sqm

2.38

1580.00

L.S.

29.64

1.49

10 No 10 No 100 N 100 N

6.00 2.00 48.00 8.00

80.00 45.00 50.00 25.00

Day Day L.S.

0.52 0.60 35.88

287.00 247.00 1.49 Total: 4238.46

Add water charges @ 1% on

Add C.P & OH @15% on 4280.84 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2068.47 Rs 2068.45

Item Code: 9.11.1 Extra for providing heavy sheet glass panes instead of ordinary glass panes in glazed shutters 5.5mm instead of 4mm

Code

2407 2406

Description Details of cost for one sqm. MATERIALS: Glasse Panes of 13.75 kg per sqm. Deduct panels of 10 kg per sqm.

Details of Cost for : 1.00 Sqm Unit Quantity

sqm sqm

1.00 -1.00

Add water charges @ 1% on

Rate

450.00 310.00 Total: 140.00

Add C.P & OH @15% on 141.40 Cost for 1.00 Sqm Rate per One Sqm:

DSR-12

Rs 162.61

Page 229 of 2298

Rate as per DSR-12:

Rs 162.60

Item Code: 9.12 Extra for using frosted glass panes 4mm instead of 4mm ordinary glass panes Details of Cost for : 1.00 Sqm Code Description Unit Quantity Materials: 7032 Froasted glass panes (4.0mm) sqm 1.00 2406 Deduct cost of ordinary glass panes (4.0mm sqm -1.00 Add water charges @ 1% on

Rate 315.00 310.00 Total: 5.00

Add C.P & OH @15% on 5.05 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 5.81 Rs 5.80

Item Code: 9.13 Deduct for using pin headed glass panes instead of ordinary glass panes 4 mm thick Details of Cost for : 1.00 Sqm Code Description Unit Quantity Cost for 1 sqm. MATERIALS: 7451 Pin headed glass panes (4.0mm) sqm 1.00 2406 Deduct cost of ordinary glass panes (4.0mm sqm -1.00 thick) Add water charges @ 1% on

Rate

255.00 310.00 Total: -55.00

Add C.P & OH @15% on -55.55 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

-Rs 63.88 -Rs 63.90

Item Code: 9.14 Extra for providing stainless steel butt hinges instead of MS butt hinges with screws Details of Cost for : 2.16 Sqm Code Description Unit Quantity Details of cost for one door shutter of a door 200xl08cm = 2.16 sqm. stainless steel butt hinges8220 100x60x2.5 mm 10 No 6.00 8218 50x37x1.5 mm 10 No 2.00 8211 Stainless steel screws 40 mm 100 N 48.00 8214 Stainless steel screws 20 mm 100 N 8.00 Deduct Black enameled butt hinges 0595 100x58x1.90mm 10 No -6.00 0597 50x37x1.5mm 10 No -2.00 Black enameled Iron 0637 Screws-40mm 100 N -48.00 0640 Screws-20mm 100 N -8.00 Add water charges @ 1% on

DSR-12

Rate

230.00 125.00 195.00 95.00

80.00 45.00 50.00 25.00 Total: 181.20

Page 230 of 2298

Add C.P & OH @15% on 183.01 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 97.44 Rs 97.45

Item Code: 9.15.1.1 Deduct if fixed shutters without hinges Stainless steel butt hinges For 2nd class teak wood and other inferior class of wood shutters

Code

8218

Description Details of cost of fittings for shutter of size 200x108cm = 2.16 sqm. MATERIALS: Anodised aluminum butt hinges Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked

8211 8214

Stainless steel screws 40 mm Stainless steel screws 20 mm

8220

Details of Cost for : -2.16 Sqm Unit Quantity

Rate

10 No

6.00

230.00

10 No

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00 Total: 264.20

Add water charges @ 1% on

Add C.P & OH @15% on 266.84 Cost for -2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

-Rs 142.07 -Rs 142.05

Item Code: 9.15.2.1 Deduct if fixed shutters without hinges Black MS butt hinges For 2nd class teak wood and other inferior class of wood shutters

Code

0595 0597 0637 0640

Description Details of cost of hinges with screws for shutters of size 200x108cm = 2.16 sqm. MATERIALS: Iron butt hinges 100x58x1.90 mm (medium) Iron butt hinges 50x37x1.50 mm (medium) Iron screws 40 mm Iron screws 20 mm

Details of Cost for : -2.16 Sqm Unit Quantity

10 No 10 No 100 N 100 N

6.00 2.00 48.00 8.00

Add water charges @ 1% on

Rate

80.00 45.00 50.00 25.00 Total: 83.00

Add C.P & OH @15% on 83.83 Cost for -2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

-Rs 44.63 -Rs 44.65

Item Code: 9.16.1.1 P/F 25mm thick shutters for cup board etc Panelled or panelled & glazed shutters 2nd class teak wood i/c anodised aluminium hinges Details of Cost for : 2.16 Sqm Code Description Unit Quantity Rate

DSR-12

Page 231 of 2298

1190 2204 2406 0694 0586 0111 0119 0114 9999

Details of cost for shutters of a cup-board (half glazed and half panelled) 200x108cm = 2.16 sqm. MATERIALS: Styles-4x200x8.0x2.5cm = 0.016 cum+ Rails-Top rail-1x1 10.5x8.0x2.5cm = 0.0022cum+ Lock and bottom rail-2x110.5x8.0x2.5cm = 0.0044 cum.+ Panels-2x48x41 x 1.6cm = 0.006cum+ Sash bars-2x114x3.8x2.5cm = 0.003cum+ 6x48x3.8x2.5cm = 0.003 cum+ Beading-16x92x 1.4x 1.2cm = 0.002cum Total = 0.0366 Add for wastage @ 10% = 0.0037 cum. Grand Total = 0.0403 cum or 40 cudm Second class teak wood . cum Carriage of timber cum Float glasses 4.0mm thick sqm FittingsAnodised aluminium butt hinges-75x45x3.2 mm 10 No C.P. brass screws 40mm 100 N LABOURCarpenter 1st class Day Glazier Day Beldar Day Sundries L.S.

0.04 0.04 0.99

72000.00 100.11 310.00

6.00 48.00

390.00 190.00

2.40 0.18 0.77 40.43

301.00 273.00 247.00 1.49 Total: 4538.07

Add water charges @ 1% on

Add C.P & OH @15% on 4583.45 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2440.26 Rs 2440.25

Item Code: 9.16.1.2 Providing and fixing 25 mm thick shutters for cup board etc. - Panelled or panelled & glazed shutters - Second class teak wood with nickel plated bright finished M.S. piano hinges.

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Styles 4x200x8.00x2.5 cm = 0.016 cum + Rails Top rail 1 x 110.5 x 8.0x2.5 cm = 0.0022 cum + Lock and bottom rails: 2 x 110.5 x 10.5x2.5 cm = 0.044 cum +

1190

DSR-12

Panels: 2x.48x41x1.6 cm = 0.006 cum + Sash bars : 2x114x3.8x2.5 cm = 0.003 cum + 6x48x3.8x2.5 = 0.003 cum + Beading : 16x92x1.4x1.2cm = 0.002 cum Total = 0.036 cum Add for wastage @ 10% = 0.0037 cum Grand Total : 0.0403 cum or 40 cudm Second class teak wood in planks

cum

0.04

72000.00

Page 232 of 2298

2204 2406

0608 0586 0111 0119 0114 9999

Carraige of Timber cum Float glass sheet of nominal thickness 4 mm (weight not less sqm than 10kg/sqm). Fittings : Nickel plated mild steel piano hinges 1 mm thick 35 mm wide metre Chromium plated Brass screws 40 mm LABOUR: Carpenter 1st class Glazier Beldar Sundries

100 N Day Day Day L.S.

0.04 0.99

100.11 310.00

4.00

35.00

114.00

190.00

2.40 0.18 0.77 40.43

301.00 273.00 247.00 1.49 Total: 4569.47

Add water charges @ 1% on

Add C.P & OH @15% on 4615.16 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2457.14 Rs 2457.15

Item Code: 9.16.2.1 P/F 25mm thick shutters for cup board etc Glazed shutters 2nd class teak wood i/c anodised aluminium hinges Details of Cost for : 2.16 Sqm Code Description Unit Quantity Rate Details of cost for shutter of cup-board 200xl08cm = 2.16 sqm. MATERIALS : (i) Teak wood second class Styles : 4x200x9.5x2.5 cm = 0.019 cum Rails Top & intermediate rails 2x110.5x9.5x2.5 cm = 0.006 cum Lock and bottom rails 2x110.5x19.7x2.5 cm = 0.011 cum Beadings2x186.1x1.9xl.2cm = 0.001cum+ 4x171.70x1.9x1.2cm = 0.002cum. Total = 0.039 cum. Add for wastage @ 10% = 0.004 cum. Grand Total = 0.043 cum. 43 cudm 1190 Teak wood second class cum 0.043 72000.00 2406 (ii) Glasses (10kg/sqm) 4.0mm thick sqm 1.27 310.00 0694 Anodised Aluminium butt hinges 75x45x3.2 mm 10 No 6.00 390.00 0639 (iv)M.S. screws 25 mm 100 N 48.00 30.00 2204 (v) Carriage of timber cum 0.043 100.11 LABOUR: 0156 Carpenter (Avg.) Day 1.83 287.00 0119 Glazier Day 0.23 273.00 0114 Beldar Day 0.77 247.00 9999 Sundries L.S. 40.43 1.49 Total: Add water charges @ 1% on 4580.83 Add C.P & OH @15% on 4626.64 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 2463.26 Rs 2463.25

Page 233 of 2298

Item Code: 9.16.2.2 Providing and fixing 25 mm thick shutters for cup board etc. - Glazed shutters - Second class teak wood - nickel plated bright finished M.S. piano hinges Details of Cost for : 2.16 Sqm Code Description Unit Quantity Rate MATERIALS: Styles 4x200x9.5x2.5 cm = 0.019 cum + Rails Top & intermediate rails 2 x 110.5 x 9.5x2.5 cm = 0.006 cum + Lock and bottom rails: 2 x 110.5 x 19.7x2.5 cm = 0.011 cum +

0608

Total = 0.039 cum Add for wastage @ 10% = 0.004 cum Grand Total : 0.0403 cum or 43cudm (?) Second class teak wood in planks Carraige of Timber Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Nickel plated mild steel piano hinges 1 mm thick 35 mm wide

0639

Bright finished or black enameled mild steel screws 25 mm

100 N

0156 0119 0114 9999

LABOUR: Carpenter (average) Glazier Beldar Sundries

Day Day Day L.S.

1190 2204 2406

cum cum sqm

0.043 0.04 1.27

72000.00 100.11 310.00

metre

4.00

35.00

114.00

30.00

1.83 0.23 0.77 40.43

287.00 273.00 247.00 1.49 Total: 4506.33

Add water charges @ 1% on

Add C.P & OH @15% on 4551.39 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2423.19 (Error in DAR Calculations) Rs 2423.35

Item Code: 9.17.1 P/F flat pressed 3layer particle board(medium density) exterior grade (Grade I) 12 mm thick Details of Cost for : 7.00 Sqm Code Description Unit Quantity Details of cost for 350x200cm = 7sqm. MATERIALS12mm thick particle board = 7.00sqm.+ Add wastage @ 5% = 0.35 sqm. 0341 Total = 7.35 sqm. sqm 7.35 9999 Carriage of particle board L.S. 13.52 9999 Sundries and screws L.S. 26.91 LABOUR0112 Carpenter 2nd class Day 0.90 0114 Beldar Day 1.00 Add water charges @ 1% on

Rate

325.00 1.49 1.49 273.00 247.00 Total: 2941.69

Add C.P & OH @15% on 2971.11 Cost for 7.00 Sqm

DSR-12

Page 234 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 488.11 Rs 488.10

Item Code: 9.17.2 P/F flat pressed 3layer particle board(medium density) exterior grade (Grade I) 18 mm thick Details of Cost for : 7.00 Sqm Code Description Unit Quantity Details of cost for 350x200cm = 7sqm. MATERIALS12mm thick particle board = 7.00sqm.+ Add wastage @ 5% = 0.35 sqm. 7055 Total = 7.35 sqm. sqm 7.35 9999 Carriage of particle board L.S. 19.76 9999 Sundries and screws L.S. 26.91 LABOUR0112 Carpenter 2nd class Day 0.90 0114 Beldar Day 1.00 Add water charges @ 1% on

Rate

390.00 1.49 1.49 273.00 247.00 Total: 3428.74

Add C.P & OH @15% on 3463.03 Cost for 7.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 568.93 Rs 568.95

Item Code: 9.18.1 P/F prelaminated flat pressed 3 layer (medium density) particle board with one side decorative and other side balancing lamination Grade I Type II exterior grade 18 mm thick Details of Cost for : 0.60 Sqm Code Description Unit Quantity Rate Details of cost for 4 nos. 75x20cm shelves = 0.60 sqm. MATERIALS18mm thick particle board = 4x75x20cm = 0.60sqm.+ Wastage @ 5% = 0.03sqm: 7478 Total = 0.63 sqm. sqm 0.63 810.00 9999 Carriage of board L.S. 0.91 1.49 LABOUR0112 Carpenter 2nd class Day 0.11 273.00 0114 Beldar Day 0.06 247.00 9999 Sundries, Painting edges & Screws L.S. 7.80 1.49 Total: Add water charges @ 1% on 568.13 Add C.P & OH @15% on 573.81 Cost for 0.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1099.80 Rs 1099.80

Item Code: 9.18.2 P/F prelaminated flat pressed 3 layer (medium density) particle board with one side decorative and other side balancing lamination Grade I Type II exterior grade 25 mm thick Details of Cost for : 0.60 Sqm

DSR-12

Page 235 of 2298

Code

7479 9999 0112 0114 9999

Description Details of cost for 4 nos. 75x20cm shelves = 0.60 sqm. MATERIALS25mm thick particle board = 4x75x20cm = 0.60sqm.+ Wastage @ 5% = 0.03sqm: Total = 0.63 sqm. Carriage of board LABOURCarpenter 2nd class Beldar Sundries, Painting edges & Screws

Unit

Quantity

Rate

sqm L.S.

0.63 1.82

880.00 1.49

Day Day L.S.

0.11 0.06 7.80

273.00 247.00 1.49 Total: 613.58

Add water charges @ 1% on

Add C.P & OH @15% on 619.72 Cost for 0.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1187.80 Rs 1187.80

Item Code: 9.20.1 P/F flush shutters decorative type, core of block board with teak 3mm ply veneering on both faces 35mm butt hinges Details of Cost for : 2.20 Sqm Code Description Unit Quantity Details of cost for 2.20 sqm. MATERIALS0713 35mm thick door shutters sqm 2.20 9999 Carriage of door L.S. 29.64 8220 Stainless steel butt hinges (heavy weight) 10 No 6.00 100x60x2.5 mm IS : 12817 marked 8211 Stainless steel screws 40 mm 100 N 48.00 LABOURFor fixing shutter and fittings 0156 Carpenter (Average) Day 0.55 0114 Beldar Day 0.55 Add water charges @ 1% on

thick i/c stainless steel

Rate

1600.00 1.49 230.00 195.00

287.00 247.00 Total: 4089.46

Add C.P & OH @15% on 4130.35 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2159.05 Rs 2159.05

Item Code: 9.20.2 P/F flush shutters decorative type, core of block board with teak 3mm ply veneering on both faces 30mm thick i/c stainless steel butt hinges Details of Cost for : 2.20 Sqm Code Description Unit Quantity Rate Details of cost for 2.2 sqm. MATERIALS0714 30mm thick door shutters sqm 2.20 1450.00 9999 Carriage of door L.S. 29.64 1.49 8220 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 6.00 230.00 12817 marked

DSR-12

Page 236 of 2298

8211

0156 0114

Stainless steel screws 40 mm LABOURFor fixing shutter and fittings. Carpenter (Average) Beldar

100 N

Day Day

48.00

195.00

0.55 0.55

287.00 247.00 Total: 3759.46

Add water charges @ 1% on

Add C.P & OH @15% on 3797.05 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1984.82 Rs 1984.80

Item Code: 9.20.3 P/F flush shutters decorative type, core of block board with teak 3mm ply veneering on both faces 25mm thick i/c nickel plated MS Piano hinges Details of Cost for : 2.20 Sqm Code Description Unit Quantity Rate Details of cost for 2.2 sqm. MATERIALS0715 25mm thick door shutters sqm 2.20 1300.00 9999 Carriage of door L.S. 29.64 1.49 Fittings-For a door 2.2x1.00m = 2.20 sqm. 0608 Nickel plated bright finished M.S. Piano hinges metre 4.40 35.00 0639 Screws 25mm 100 N 125.00 30.00 LABOURFor fixing shutter and fittings. 0156 Carpenter (Average) Day 0.55 287.00 0114 Beldar Day 0.55 247.00 Total: Add water charges @ 1% on 3389.36 Add C.P & OH @15% on 3423.25 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1789.43 Rs 1789.45

Item Code: 9.21.1 P/F Flush shutters non-decorative type, core of block_x000D_ board with commercial 3 ply veneering on both faces_x000D_ Code 0717

Description 35mm thick door shutters

9999

Carriage of door

Details of Cost for : 2.20 Sqm Unit Quantity sqm

8220 8211

L.S. Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel screws 40 mm 100 N Labour :

Rate

2.20

1100.00

29.64 6.00

1.49 230.00

48.00

195.00

0.55 0.55

287.00 247.00 Total:

For fixing shutter and fittings. 0156 0114

DSR-12

Carpenter (average) Beldar

Day Day

Page 237 of 2298

Add water charges @ 1% on

2989.46

Add C.P & OH @15% on 3019.35 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1578.30 Rs 1578.30

Item Code: 9.21.2 P/F ISI marked flush door shutter - non-decorative 30mm thick i/c stainless steel butt hinges: Details of Cost for : 2.20 Sqm Code Description Unit Quantity MATERIALS: 0718 Block board construction flush sqm 2.20 9999 Carriage of door L.S. 29.64 8220 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 6.00 12817 marked 8211 40mm Stainless Steel Screws 100 N 48.00 LabourFor fixing shutter and fittings. 0156 0114

Carpenter (average) Beldar

Day Day

0.55 0.55

Add water charges @ 1% on

Rate 950.00 1.49 230.00 195.00

287.00 247.00 Total: 2659.46

Add C.P & OH @15% on 2686.05 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1404.07 Rs 1404.05

Item Code: 9.21.3 P/F ISI marked flush door shutters non-decorative type, 3 ply veneering : 25mm thick including ISI marked nickel plated bright finished M.S. piano hinges. Details of Cost for : 2.20 Sqm Code Description Unit Quantity Rate 0719 25mm thick door shutters sqm 2.20 850.00 9999 Carriage of door L.S. 29.64 1.49 Fittings-For a door 2.2x1.0m = 2.20 sqm. 0608 0639

Piano hinges - Nickel plated 35mm wide - 1mm thick. Screws - 25mm For fixing shutter and fittings.

metre 100 N

0156 0114

Carpenter (average) Beldar

Day Day

4.40 125.00

35.00 30.00

0.55 0.55

287.00 247.00 Total: 2399.36

Add water charges @ 1% on

Add C.P & OH @15% on 2423.35 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 1266.75 Rs 1266.75

Page 238 of 2298

Item Code: 9.22.1 Extra for P/F flush doors with decorative veneering On one side in item 9.25 Code 7307

Details of Cost for : 1.00 Sqm Unit Quantity

Description Details of cost for 1 sqm. Extra for providing teak veneering on one side

sqm

1.00

Add water charges @ 1% on

Rate 320.00 Total: 320.00

Add C.P & OH @15% on 323.20 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 371.68 Rs 371.70

Item Code: 9.23 Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters Over item 9.24 and 9.25 Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate Details of cost for 1 sqm. of door area 0752 Door area sqm o 1.00 280.00 Total: Add water charges @ 1% on 280.00 Add C.P & OH @15% on 282.80 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 325.22 Rs 325.20

Item Code: 9.24.1 Extra for P/F vision panel in flush door shutters Rectangular or square Code 0753

Description Details of cost for 1 sqm. of door area Rectangular or square per panel door area

Details of Cost for : 1.00 Sqm Unit Quantity sqm o

1.00

Add water charges @ 1% on

Rate 110.00 Total: 110.00

Add C.P & OH @15% on 111.10 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 127.77 Rs 127.75

Item Code: 9.24.2 Extra for P/F vision panel in flush door shutters Circular Code 0754

DSR-12

Description Details of cost for 1 sqm. of door area Circular panel door area

Details of Cost for : 1.00 Sqm Unit Quantity Sqm o

1.00

Rate

Add water charges @ 1% on

170.00 Total: 170.00

Add C.P & OH @15% on

171.70

Page 239 of 2298

Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 197.46 Rs 197.45

Item Code: 9.25.1 Extra if louvers (upto 0.2sqm) are provided in flush door shutters Decorative type door Details of Cost for : 1.00 Sqm Code Description Unit Quantity Details of cost for 1 sqm. of door area 0755 Decorative type door sqm o 1.00 Add water charges @ 1% on

Rate 290.00 Total: 290.00

Add C.P & OH @15% on 292.90 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 336.84 Rs 336.85

Item Code: 9.26 Extra for cutting rebate in flush door shutters Code 0757

Description Details of cost for 1 sqm. of door area Door area

Details of Cost for : 1.00 Sqm Unit Quantity sqm o

1.00

Add water charges @ 1% on

Rate 80.00 Total: 80.00

Add C.P & OH @15% on 80.80 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 92.92 Rs 92.90

Item Code: 9.27.1.1.1 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - M.S. pressed butt hinges - Second class teak wood

Code

1190

DSR-12

Description MATERIALS: TEAK WOOD (2ND CLASS) Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Second class teak wood in planks Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Details of Cost for : 2.16 Sqm Unit Quantity

cum

0.0514

Rate

72000.00

Page 240 of 2298

7029

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

2204

Carraige of Timber LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

cum

0.0514

100.11

Day Day Day Day L.S.

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 5091.57

0595 0597

0111 0112 0114 0130 9999

Add water charges @ 1% on

Add C.P & OH @15% on 5142.49 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2737.90 Rs 2737.90

Item Code: 9.27.1.1.2 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - M.S. pressed butt hinges - Kiln seasoned chemically treated hollock wood.

Code

2505 2204 2504 9999

7029 0595 0597 0637

DSR-12

Description MATERIALS: Hollock wood : Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Hollock wood in planks Carraige of Timber Kiln seasoning of timber Chemical treatment Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

cum cum cum L.S.

0.0514 0.0514 0.0514 8.97

35000.00 100.11 680.00 1.49

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

100 N

48.00

50.00

Page 241 of 2298

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0111 0112 0114 0130 9999

LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Day Day Day Day L.S.

8.00

25.00

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 3238.09

Add water charges @ 1% on

Add C.P & OH @15% on 3270.47 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1741.22 Rs 1741.20

Item Code: 9.27.1.1.3 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - M.S. pressed butt hinges - Kiln seasoned selected class sesham wood.

Code

1200 2204 2504

Details of Cost for : 2.16 Sqm Unit Quantity

Description MATERIALS: Sesham wood : Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Cum cum cum

0.0514 0.0514 0.0514

65000.00 100.11 680.00

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111 0112 0114 0130 9999

LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Day Day Day Day L.S.

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 4766.72

7029 0595 0597

Add water charges @ 1% on

DSR-12

Rate

Page 242 of 2298

Add C.P & OH @15% on 4814.39 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2563.22 Rs 2563.20

Item Code: 9.27.1.2.1 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - Stainless steel butt hinges - Second class teak wood

Code

1190 2204

7029 8220 8218 8211 8214 0111 0112 0114 0130 9999

Description MATERIALS: TEAK WOOD (2ND CLASS) Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Second class teak wood in planks Carraige of Timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Details of Cost for : 2.16 Sqm Unit Quantity

cum cum

0.0514 0.0514

72000.00 100.11

1.41

230.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 5272.77

Galvanised wire mesh of average width of aperture 1.4 mm sqm and nominal dia. of wire 0.63 mm Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Rate

Add water charges @ 1% on

Add C.P & OH @15% on 5325.50 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2835.34 Rs 2835.35

Item Code: 9.27.1.2.2 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - Stainles steel butt hinges - Kiln seasoned chemically treated hollock wood. Details of Cost for : 2.16 Sqm

DSR-12

Page 243 of 2298

Code

2505 2204 2504 9999

7029 8220 8218 8211 8214 0111 0112 0114 0130 9999

Description MATERIALS: Hollock wood : Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Hollock wood in planks Carraige of Timber Kiln seasoning of timber Chemical treatment Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Unit

Quantity

Rate

cum cum cum L.S.

0.0514 0.0514 0.0514 8.97

35000.00 100.11 680.00 1.49

1.41

230.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 3419.29

Galvanised wire mesh of average width of aperture 1.4 mm sqm and nominal dia. of wire 0.63 mm Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Add water charges @ 1% on

Add C.P & OH @15% on 3453.48 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1838.66 Rs 1838.65

Item Code: 9.27.1.2.3 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - Stainles steel butt hinges - Kiln seasoned selected class sesham wood.

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Sesham wood : Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum

DSR-12

Page 244 of 2298

1200 2204 2504

7029 8220 8218 8211 8214 0111 0112 0114 0130 9999

Grand Total : 0.0514 cum or 51.4 cudm Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Cum cum cum

0.0514 0.0514 0.0514

65000.00 100.11 680.00

1.41

230.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 4947.92

Galvanised wire mesh of average width of aperture 1.4 mm sqm and nominal dia. of wire 0.63 mm Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Add water charges @ 1% on

Add C.P & OH @15% on 4997.40 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2660.65 Rs 2660.65

Item Code: 9.27.2.1.1 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - M.S. pressed butt hinges - Second class teak wood

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Teak wood (2nd class) Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 1190 2204

Second class teak wood in planks Carraige of Timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

7029

Galvanised wire mesh of average width of aperture 1.4 mm sqm and nominal dia. of wire 0.63 mm Bright finished or black enameled mild steel butt hinges 10 No 100x58x1.90 mm

0595

DSR-12

cum cum

0.044 0.044

72000.00 100.11

1.41

230.00

6.00

80.00

Page 245 of 2298

0597 0637

Bright finished or black enameled mild steel butt hinges 10 No 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm 100 N

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0111 0112 0114 0130 9999

LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Day Day Day Day L.S.

2.00

45.00

48.00

50.00

8.00

25.00

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 4486.76

Add water charges @ 1% on

Add C.P & OH @15% on 4531.63 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2412.67 Rs 2412.70

Item Code: 9.27.2.1.2 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - M.S. pressed butt hinges - Kiln seasoned Chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Hollock wood : Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 2505 2204 2504 9999

Hollock wood in planks Carraige of Timber Kiln seasoning of timber Chemical treatment Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

cum cum cum L.S.

0.044 0.044 0.044 9.10

35000.00 100.11 680.00 1.49

7029

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111 0112

LABOUR: Carpenter 1st class Carpenter 2nd class

Day Day

1.20 0.80

301.00 273.00

0595 0597

DSR-12

Page 246 of 2298

0114 0130 9999

Beldar Mistry Sundries

Day Day L.S.

1.00 0.10 33.80

Add water charges @ 1% on

247.00 301.00 1.49 Total: 2902.24

Add C.P & OH @15% on 2931.26 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1560.63 Rs 1560.65

Item Code: 9.27.2.1.3 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - M.S. pressed butt hinges - Kiln seasoned selected class of sesham wood.

Code

Details of Cost for : 2.16 Sqm Unit Quantity

Description

Rate

MATERIALS: Kiln seasoned selected class of sesham wood. Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 1200 2204 2504

Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Cum cum cum

0.044 0.044 0.044

65000.00 100.11 680.00

7029

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111 0112 0114 0130 9999

LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Day Day Day Day L.S.

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 4208.68

0595 0597

Add water charges @ 1% on

Add C.P & OH @15% on 4250.77 Cost for 2.16 Sqm Rate per One Sqm:

DSR-12

Rs 2263.14

Page 247 of 2298

Rate as per DSR-12:

Rs 2263.15

Item Code: 9.27.2.2.1 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - Stainles steel hinges - Second class teak wood

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Teak wood (2nd class) Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 1190 2204

Second class teak wood in planks Carraige of Timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

7029

Galvanised wire mesh of average width of aperture 1.4 mm sqm and nominal dia. of wire 0.63 mm Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220 8218 8211 8214 0111 0112 0114 0130 9999

Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

cum cum

0.044 0.044

72000.00 100.11

1.41

230.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 4667.96

Add water charges @ 1% on

Add C.P & OH @15% on 4714.64 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2510.11 Rs 2510.10

Item Code: 9.27.2.2.2 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - Stainles steel hinges - Kiln seasoned Chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Hollock wood : Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+

DSR-12

Page 248 of 2298

Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 2505 2204 2504 9999

Hollock wood in planks Carraige of Timber Kiln seasoning of timber Chemical treatment Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

7029

Galvanised wire mesh of average width of aperture 1.4 mm sqm and nominal dia. of wire 0.63 mm Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220 8218 8211 8214 0111 0112 0114 0130 9999

Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

cum cum cum L.S.

0.044 0.044 0.044 8.97

35000.00 100.11 680.00 1.49

1.41

230.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 3083.25

Add water charges @ 1% on

Add C.P & OH @15% on 3114.08 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1657.96 Rs 1657.95

Item Code: 9.27.2.2.3 P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - Stainles steel - Kiln seasoned selected class of sesham wood.

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Kiln seasoned selected class of sesham wood. Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 1200 2204 2504

DSR-12

Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Wire guage - 2x160x40 cm = 1.28 sqm

Cum cum cum

0.044 0.044 0.044

65000.00 100.11 680.00

Page 249 of 2298

Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm 7029 8220 8218 8211 8214 0111 0112 0114 0130 9999

Galvanised wire mesh of average width of aperture 1.4 mm sqm and nominal dia. of wire 0.63 mm Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

1.41

230.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 4389.88

Add water charges @ 1% on

Add C.P & OH @15% on 4433.78 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2360.58 Rs 2360.60

Item Code: 9.31.1 P/F wire gauze laminated veneer lumber shutters using galvanised wire gauze for doors, windows 35 mm thick Details of Cost for : 2.38 Sqm Code Description Unit Quantity Rate Details of cost of one shutter 220xl08cm = 2.38sqm. MATERIALS: 7154 Factory made shutters LVL syles, rails and panels of sqm 2.38 1630.00 galvanised wire gauge 9999 Carriage of shutters L.S. 29.64 1.49 Fittings : 0595 Black enamelled M.S. Butt hinges-100x58x1.9mm 10 No 6.00 80.00 0597 Black enamelled M.S. Butt hinges-50x37x 1.5 10 No 2.00 45.00 0637 M.S. Screws 40mm 100 N 48.00 50.00 0640 M.S. Screws 20mm 100 N 8.00 25.00 LABOUR: 0156 Carpenter Average Day 0.52 287.00 0114 Beldar Day 0.60 247.00 9999 Sundries L.S. 35.88 1.49 Total: Add water charges @ 1% on 4357.46 Add C.P & OH @15% on 4401.03 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2126.55 Rs 2126.55

Item Code: 9.31.2 P/F wire gauze laminated veneer lumber shutters using galvanised wire gauze for doors, windows 30 mm thick Details of Cost for : 2.38 Sqm Code Description Unit Quantity Rate

DSR-12

Page 250 of 2298

7155 9999 0595 0597 0637 0640 0156 0114 9999

Details of cost of one shutter 220xl08cm = 2.38sqm. MATERIALS: Factory made shutters LVL syles, rails and panels of sqm galvanised wire gauge Carriage of shutters L.S. Fittings: Black enamelled M.S. Butt hinges-100x5 8x1.9mm 10 No Black enamelled M.S. Butt hinges-50x37xl.5 10 No M.S. Screws 40mm 100 N M.S. Screws 20mm 100 N LABOUR: Carpenter Average Day Beldar Day Sundries L.S.

2.38

1385.00

29.64

1.49

6.00 2.00 48.00 8.00

80.00 45.00 50.00 25.00

0.52 0.60 35.88

287.00 247.00 1.49 Total: 3774.36

Add water charges @ 1% on

Add C.P & OH @15% on 3812.10 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1841.98 Rs 1842.00

Item Code: 9.32 Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3 Code

Details of Cost for : 100.00 Nos Unit Quantity

Description

Rate

MATERIALS: Teak wood (2nd class) 100x(50x50x50)mm = 0.0125cum Add wastage @ 10% = 0.0013 cum. Total =0.0138 cum. Say 14 cudm. 1189 2204 03.003

Second class teak wood in scantling Carraige of Timber Cement mortar 1:3 (1 cement : 3 fine sand) Labour :

cum cum Cum

0.014 0.014 0.002

64000.00 100.11 3631.93

0112 0124 0114

Carpenter II class Mason II class Beldar

Day Day Day

0.75 0.75 0.75

273.00 273.00 247.00 Total: 1499.41

Add water charges @ 1% on

Add C.P & OH @15% on 1514.40 Cost for 100.00 Nos Rate per Each: Rate as per DSR-12:

Rs 17.42 Rs 17.40

Item Code: 9.33.1 P/F expandable fastners of specified size with plastic sleeves 25 mm long Code

Description

Details of Cost for : 10.00 Nos Unit Quantity

Rate

Details of cost of 10 nos. MATERIALS:

DSR-12

Page 251 of 2298

7312 9999

Expandable fastner 25 mm long with plastic sleeve and M.S. each screws Labour for drilling holes and making good etc. and sundries L.S.

10.00

8.00

20.80

1.49

Add water charges @ 1% on

Total: 110.99

Add C.P & OH @15% on 112.10 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 12.89 Rs 12.90

Item Code: 9.33.2 P/F expandable fastners of specified size with plastic sleeves 32 mm long Code

7313 9999

Details of Cost for : 10.00 Nos Unit Quantity

Description

Details of cost of 10 nos. MATERIALS: Expandable fastner 32 mm long with plastic sleeve and M.S. each screws Labour for drilling holes and making good etc. and sundries L.S.

Rate

10.00

9.00

26.00

1.49

Add water charges @ 1% on

Total: 128.74

Add C.P & OH @15% on 130.03 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 14.95 Rs 14.95

Item Code: 9.33.3 P/F expandable fastners of specified size with plastic sleeves 40 mm long Code

7314 9999

Details of Cost for : 10.00 Nos Unit Quantity

Description

Details of cost of 10 nos. MATERIALS: Expandable fastner 40 mm long with plastic sleeve and M.S. each screws Labour for drilling holes and making good etc. L.S.

Rate

10.00

12.00

26.00

1.49 Total: 158.74

Add water charges @ 1% on

Add C.P & OH @15% on 160.33 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 18.44 Rs 18.45

Item Code: 9.33.4 P/F expandable fastners of specified size with plastic sleeves 50 mm long Code

Description

Details of Cost for : 10.00 Nos Unit Quantity

Rate

Details of cost of 10 nos. MATERIALS:

DSR-12

Page 252 of 2298

7315 9999

Expandable fastner 50 mm long with plastic sleeve and M.S. each screws Labour for drilling holes and making good etc. and sundries L.S.

10.00

14.00

26.00

1.49

Add water charges @ 1% on

Total: 178.74

Add C.P & OH @15% on 180.53 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 20.76 Rs 20.75

Item Code: 9.34.1 P/F 2nd class teak wood plain lining tongued and grooved on and including wooden plugs 40 mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: Teak wood (2nd class) 10x0.04m = 0.40cum+ Add wastage @ 10% = 0.04 cum. = 0.44 cum. Say 440 cudm. 1190 Teak wood (2nd class) cum 0.44 72000.00 1231 Extra for selected planks cum 0.44 11500.00 Second class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) 09.032 Providing 50x50x50mm 2nd class teak wood plugs fixing in 55.00 17.42 CM 1:3 13.050.01 Applying priming coat : With ready mixed pink or Grey primer 10.00 25.83 (hard and soft wood) 2204 Carriage of timber cum 0.44 100.11 LABOUR: For planning and fixing 0111 Carpenter 1st class Day 2.15 301.00 0114 Beldar Day 1.62 247.00 9999 Sundries & screws etc. L.S. 53.82 1.49 Total: Add water charges @ 1% except on [A]+[B] i.e on 37911.53 Add C.P & OH @15% except on [A]+[B] i.e on 38290.65 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 4525.07 Rs 4525.00

Item Code: 9.34.2 P/F 2nd class teak wood plain lining tongued and grooved on and including wooden plugs 25 mm thick. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate Details of cost for 10 sqm. MATERIALS: Teak wood 2nd class 10x0.025 = 0.25cum+ Add wastage @ 10% = 0.025 cum. = 0.275 cum. Say 275 cudm. 1190 Teak wood (2nd class) cum 0.275 72000.00 1231 Extra for selected planks of second class teakwood cum 0.275 11500.00 2204 Carriage of timber cum 0.275 100.11

DSR-12

Page 253 of 2298

Second class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) 09.032 13.050.01

0111 0114 9999

Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3 Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) LABOUR: Carpenter 1 st class Day Beldar Day Sundries & screws etc. L.S.

55.00

17.42

10.00

25.83

2.15 1.62 53.82

301.00 247.00 1.49 Total: 24117.51

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 24358.69 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2922.89 Rs 2922.80

Item Code: 9.34.3 P/F 2nd class teak wood plain lining tongued and grooved on and including wooden plugs 20 mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: Teak wood (2nd class) 10x0.02m = 0.20cum.+ Add wastage @ 10% = 0.02 cum. = 0.22 cum. Say 220 cudm. 1190 Teak wood (2nd class) cum 0.22 72000.00 1231 Extra for selected planks cum 0.22 11500.00 2204 Carriage of timber cum 0.22 100.11 Second class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) 09.032 Providing 50x50x50mm 2nd class teak wood plugs fixing in 55.00 17.42 CM 1:3 13.050.01 Applying priming coat : With ready mixed pink or Grey primer 10.00 25.83 (hard and soft wood) LABOUR: 0111 Carpenter 1 st class Day 1.08 301.00 0112 Carpenter 2nd class Day 0.80 273.00 0114 Beldar Day 1.08 247.00 9999 Sundries & screws etc. L.S. 53.82 1.49 Total: Add water charges @ 1% except on [A]+[B] i.e on 19282.45 Add C.P & OH @15% except on [A]+[B] i.e on 19475.27 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2361.30 Rs 2361.20

Item Code: 9.34.4 P/F 2nd class teak wood plain lining tongued and grooved on and including wooden plugs 12 mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity Details of cost for 10 sqm. Wood-Second class teak wood 10x0.012 = 0.12

DSR-12

Rate

Page 254 of 2298

1190 1231 2204

09.032

0111 0112 0114 13.050.01 9999

cum+ Add wastage @ 10% = 0.012 cum. = 0.132 cum. Say 132 cudm. Second class teak wood cum Extra for selected planks cum Carriage of timber cum Second class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3 LABOUR: Carpenter 1 st class Carpenter 2nd class Beldar Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) Sundries & screws etc.

0.132 0.132 0.132

72000.00 11500.00 100.11

55.00

17.42

Day Day Day

1.08 0.80 1.08 10.00

301.00 273.00 247.00 25.83

L.S.

53.82

1.49 Total: 11925.64

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 12044.90 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1506.80 Rs 1506.70

Item Code: 9.35.1 P/F wall lining flat pressed 3 layer and graded (medium density) particle board prelaminated one side decorative lamination on other side balancing lamination grade I, T-II 12 mm thick

Code

7477 9999 9999 13.050.01

0112 0114 7048

Description Details of cost for 10 sqm. MATERIALSParticle board (three layer medium density) 12mm thick = 10 sqm.+ Add wastage @ 10% = 1 sqm. = 11 sqm. Particle board (three layer medium density) Carriage of particle board Sundries and screws Priming coat Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) LABOUR: Carpenter 2nd class Beldar Rawl plug 50 mm (designation 10 no)

Details of Cost for : 10.00 Sqm Unit Quantity

sqm L.S. L.S.

Day Day each

Rate

11.00 13.52 26.91

690.00 1.49 1.49

10.00

25.83

1.28 1.43 55.00

273.00 247.00 10.00 Total: 8902.89

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 8991.92 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 1059.90 Rs 1059.90

Page 255 of 2298

Item Code: 9.35.2 P/F wall lining flat pressed 3 layer and graded (medium density) particle board prelaminated one side decorative lamination on other side balancing lamination grade I, T-II 18 mm thick

Code

7478 9999 9999 13.050.01

0112 0114 7048

Description Details of cost for 10 sqm. MATERIALSParticle board (three layer medium density) 18 mm thick = 10 sqm.+ Add wastage @ 10% = 1 sqm. = 11 sqm. Particle board (three layer medium density) Carriage of particle board Sundries and screws Priming coat Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) LABOUR: Carpenter 2nd class Beldar Rawl plug 50 mm (designation 10 no)

Details of Cost for : 10.00 Sqm Unit Quantity

sqm L.S. L.S.

Day Day each

Rate

11.00 13.52 26.91

810.00 1.49 1.49

10.00

25.83

1.28 1.43 55.00

273.00 247.00 10.00 Total: 10222.89

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 10325.12 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1213.22 Rs 1213.25

Item Code: 9.35.3 P/F wall lining flat pressed 3 layer and graded (medium density) particle board prelaminated one side decorative lamination on other side balancing lamination grade I, T-II 25 mm thick

Code

7479 9999 9999 13.050.01

0112 0114 7048

DSR-12

Description Details of cost for 10 sqm. MATERIALSParticle board (three layer medium density) 25 mm thick = 10 sqm.+ Add wastage @ 10% = 1 sqm. = 11 sqm. Prelaminated particle board with one side decorative and other side balancing lamination, Carriage of particle board Sundries and screws Priming coat Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) LABOUR: Carpenter 2nd class Beldar Rawl plug 50 mm (designation 10 no)

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

sqm

11.00

880.00

L.S. L.S.

13.52 26.91

1.49 1.49

10.00

25.83

1.28 1.43 55.00

Add water charges @ 1% except on [A] i.e on

273.00 247.00 10.00 Total: 10992.89

Add C.P & OH @15% except on [A] i.e on

11102.82

Day Day each

Page 256 of 2298

Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1302.65 Rs 1302.65

Item Code: 9.36.1 P/F specified wood frame work consisting of battens 50x25mm fixed with rawlplug & drilling Hollock wood. Details of Cost for : 0.03125 Cum Code Description Unit Quantity Rate Details of cost for 5 no. battens of size 500cmx50mmx25mm (31.25 cudm) MATERIALSHollock wood- 5x5.00x0.50x0.025 = 0.03125 cum+ Add wastage @ 5% = 0.00156 cum. = 0.03281 cum. Say 33 cudm. 2505 Hollock wood cum 0.033 35000.00 2204 Carriage of timber cum 0.033 100.11 LABOUR: 0111 Carpenter 1 st class Day 1.00 301.00 0114 Beldar Day 0.25 247.00 9999 Sundries L.S. 6.76 1.49 Painting with ready mixed priming coat on ground 5x500x15 cm =3.75 sqm 13.050.01 Applying priming coat : With ready mixed pink or Grey primer 3.75 25.83 (hard and soft wood) 7048 Rawl plug 50 mm (designation 10 no) each 55.00 10.00 9999 Labour for drilling holes steel tape sundries L.S. 71.50 1.49 Total: Add water charges @ 1% except on [A] i.e on 2187.66 Add C.P & OH @15% except on [A] i.e on 2209.54 Cost for 0.03125 Cum Rate per One Cum: Rs 84410.56 Rate as per DSR-12: Rs 84413.10 (Diff due to rounding off in sub-item rate) Item Code: 9.37.1 P/F 4 mm thick plywood plain lining with necessary screws:- Decorative veneer facings of approved manufacture.

Code

0759 9999

09.032

0111 0114 0130 9999

DSR-12

Details of Cost for : 10.00 Sqm Description Unit Quantity Details of cost for 10 sqm. MATERIALSTeak ply wood = 10sqm.+ Add for wastage @ 20% = 2 sqm. = 12 sqm. teak ply wood sqm 12.00 Carriage of ply wood L.S. 5.46 Wooden plugs including cutting brick work and fixing in cement mortar Providing 50x50x50mm 2nd class teak wood plugs fixing in 55.00 CM 1:3 LABOURCarpenter 1st class Day 3.80 Beldar Day 4.60 Mistry Day 0.60 20mm nails without head for fixing ply L.S. 53.82

Rate

400.00 1.49

17.42

301.00 247.00 301.00 1.49

Page 257 of 2298

13.050.01

Painting with ready mixed priming coat Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood)

10.00

25.83

Add water charges @ 1% except on [A]+[B] i.e on

Total: 7348.93

Add C.P & OH @15% except on [A]+[B] i.e on 7422.42 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 975.22 Rs 975.15

Item Code: 9.38 P/F 4 mm thick coir veneer board, ISI marked IS:14842 -2000, plain lining. Code

7552 9999

09.032

0111 0114 0130 9999 13.050.01

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALSCoir veneered board 4mm thick = 10sqm.+ Add for wastage @ 20% = 2 sqm. = 12 sqm. Coir veneered board 4mm thick Carriage of Coir veneered board Wooden plugs including cutting brick work and fixing in cement mortar Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3 LABOURCarpenter 1st class Beldar Mistry 20mm nails without head for fixing ply Painting with ready mixed priming coat Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood)

sqm L.S.

Rate

12.00 5.46

272.00 1.49

55.00

17.42

3.80 4.60 0.60 53.82

301.00 247.00 301.00 1.49

10.00

25.83

Add water charges @ 1% except on [A]+[B] i.e on

Total: 5812.93

Day Day Day L.S.

Add C.P & OH @15% except on [A]+[B] i.e on 5871.06 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 796.81 Rs 796.70

Item Code: 9.39.1 P/F skirting of prelaminated with (one side decorative and other wide balancing laminat- ion) flat pressed,3 layer and graded particle board (medium density) Grade I, Type II conforming to IS: 12823 :- 18 mm thick.

Code

7478 9999

DSR-12

Description Details of cost for skirting 200mm wide and 30m long Area = 0.2x30= 6 sqm. Area = 0.2x30= 6 sqm. MATERIALSTeak shade prelaminated Particle board (three layer medium density) = 6.0 sqm.+ Add wastage @ 10% = 0.6sqm. = 6.6 sqm. Particle board 18 mm thick Carriage of particle board

Details of Cost for : 6.00 Sqm Unit Quantity

sqm L.S.

6.60 8.11

Rate

810.00 1.49

Page 258 of 2298

7048 9999

0112 0114 9999 13.050.01

Rawl plug 50 mm (designation 10 no) Labour for drilling holes LABOUR:For dressing and fixing particle board to skirting Carpenter 2nd class Beldar Sundries (Screws, sand paper) Painting with ready mixed priming coat at back Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood)

each L.S.

102.00 130.00

10.00 1.49

Day Day L.S.

0.77 0.86 53.82

273.00 247.00 1.49

6.00

25.83

Add water charges @ 1% except on [A] i.e on

Total: 7074.60

Add C.P & OH @15% except on [A] i.e on 7145.35 Cost for 6.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1395.36 Rs 1395.40

Item Code: 9.39.2 P/F skirting of prelaminated with (one side decorative and other wide balancing laminat- ion) flat pressed,3 layer and graded particle board (medium density) Grade I, Type II conforming to IS: 12823 :- 25 mm thick.

Code

7479 9999 7048 9999

0112 0114 9999 13.050.01

Description Details of cost for skirting 200mm wide and 30m long Area = 0.2x30= 6 sqm. Area = 0.2x30= 6 sqm. MATERIALSTeak shade prelaminated Particle board (three layer medium density) = 6.0 sqm.+ Add wastage @ 10% = 0.6sqm. = 6.6 sqm. Particle board 25 mm thick Carriage of particle board Rawl plug 50 mm (designation 10 no) Labour for drilling holes LABOUR:For dressing and fixing particle board to skirting Carpenter 2nd class Beldar Sundries (Screws, sand paper) Painting with ready mixed priming coat at back Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood)

Details of Cost for : 6.00 Sqm Unit Quantity

Rate

sqm L.S. each L.S.

6.60 8.11 102.00 130.00

880.00 1.49 10.00 1.49

Day Day L.S.

0.77 0.86 53.82

273.00 247.00 1.49

6.00

25.83

Add water charges @ 1% except on [A] i.e on

Total: 7536.60

Add C.P & OH @15% except on [A] i.e on 7611.97 Cost for 6.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1484.79 Rs 1484.80

Item Code: 9.40.1.1 P/F wooden moulded beading to door and window frames with iron screws, plugs :- 2nd class teak wood : 50 x 12 mm. Details of Cost for : 5.00 m

DSR-12

Page 259 of 2298

Code

1190 2204 0637

13.050.01

0111

Description Details of cost for beading for a window of size 140x110cm i.e. 500cm long (5 metre) MATERIALSTeak wood Ilnd class in planks 500x5x1.2cm = 0.003 cum+ Add for wastage @ 10% = 0.0003 cum. = 0.0033 cum. Say 3.3 cudm. Second class teak wood Carriage of timber Iron screws 40 mm Painting with priming coat Area = 500(5+1.2+1.2) = 0.37 sqm Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) LABOURFor plaining, fixing and making design Carpenter 1st class

Unit

cum cum 100 N

Day

Quantity

Rate

0.0033 0.0033 36.00

72000.00 100.11 50.00

0.37

25.83

0.53

301.00 Total: 415.46

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 419.61 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 98.42 Rs 98.40

Item Code: 9.40.1.2 P/F wooden moulded beading to door and window frames with iron screws, plugs :- 2nd class teak wood : 50 x 20 mm.

Code

1190 2204 0637

13.050.01

0111

Description Details of cost for beading of a window of size 140x110cm i.e. 500cm. long (5metre) MaterialsTeak wood Ilnd class in planks 500x5x2.0cm = 0.005cum+ Add for wastage @ 10% = 0.0005 cum. = 0.0055 cum. Say 5.5 cudm. Second class teak wood Carriage of timber Iron screws 40 mm Painting with priming coat Area = 500(5+2+2) = 0.45 sqm Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) LabourFor plaining, fixing and making design Carpenter 1 st class

Details of Cost for : 5.00 m Unit Quantity

cum cum 100 N

Day

Rate

0.0055 0.0055 36.00

72000.00 100.11 50.00

0.45

25.83

0.53

301.00 Total: 574.08

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 579.82 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 135.68 Rs 135.70

Page 260 of 2298

Item Code: 9.40.2.1 P/F wooden moulded beading to door and window frames with iron screws, plugs :- Hollock wood : 50 x 12 mm. Details of Cost for : 5.00 m Code Description Unit Quantity Rate Details of cost for beading for a window of size 140x110cm i.e. 500cm long (5 metre) MATERIALSHollock wood 500x5x1.2cm = 0.003 cum+ Add for wastage @ 10% = 0.0003 cum. = 0.0033 cum. Say 3.3 cudm. 2505 Hollock wood cum 0.0033 35000.00 2204 Carriage of timber cum 0.0033 100.11 0637 Iron screws 40 mm 100 N 36.00 50.00 Painting with priming coat Area = 500(5+1.2+1.2) = 0.37 sqm 13.050.01 Applying priming coat : With ready mixed pink or Grey primer 0.37 25.83 (hard and soft wood) LABOURFor plaining, fixing and making design 0111 Carpenter 1 st class Day 0.53 301.00 Total: Add water charges @ 1% except on [A] i.e on 293.36 Add C.P & OH @15% except on [A] i.e on 296.29 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 70.06 Rs 70.05

Item Code: 9.40.2.2 P/F wooden moulded beading to door and window frames with iron screws, plugs :- Hollock wood : 50 x 20 mm. Details of Cost for : 5.00 m Code Description Unit Quantity Rate Details of cost for beading for a window of size 140x110cm i.e. 500cm long (5 metre) MATERIALSHollock wood 500x5x200cm = 0.005 cum+ Add for wastage @ 10% = 0.0005 cum. = 0.0055 cum. Say 5.5 cudm. 2505 Hollock wood cum 0.0055 35000.00 2204 Carriage of timber cum 0.0055 100.11 0637 Iron screws 40 mm 100 N 36.00 50.00 Painting with priming coat Area = 500(5+2+2) = 0.45 sqm 13.050.01 Applying priming coat : With ready mixed pink or Grey primer 0.45 25.83 (hard and soft wood) LABOURFor plaining, fixing and making design 0111 Carpenter 1 st class Day 0.53 301.00 Total: Add water charges @ 1% except on [A] i.e on 370.58 Add C.P & OH @15% except on [A] i.e on 374.29 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 88.41 Rs 88.40

Page 261 of 2298

Item Code: 9.41.1 P/F plain jaffri of 35 x 10 mm laths placed 35mm apart(frames to be paid separately) i/c fixing 50 x 12mm beading :- Second class teak wood._x000D_ Details of Cost for : 2.20 Sqm Code Description Unit Quantity Rate Details of cost of a jaffri 200x110cm =2.2sqm MATERIALSTeakwood Ilnd class Jaffri 210x120x1.0cm = 0.025cum.+ Beading 660x5x1.2cm = 0.004cum. = 0.029 cum.+ Add wastage @ 10% = 0.003 cum. = 0.032 cum. Say 32 cudm. 1190 Second class teak wood in planks cum 0.032 72000.00 2204 Carriage of timber cum 0.032 100.11 LABOUR0111 Carpenter 1 st class Day 0.75 301.00 0112 Carpenter 2nd class Day 1.00 273.00 0114 Beldar Day 0.50 247.00 0130 Mistry Day 0.10 301.00 9999 Sundries L.S. 33.80 1.49 Total: Add water charges @ 1% on 3009.91 Add C.P & OH @15% on 3040.01 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1589.10 Rs 1589.10

Item Code: 9.42 P/F 18mm thick 150mm wide pelmet of flat pressed 3 layer top cover with 6mm commercial plywood, MS nickel pipe 20mm dia

7055

Details of Cost for : 2.00 m Description Unit Quantity Details of cost for a pelmet 2m long MATERIALS(i) 18mm thick particle board (medium density exterior grade) sqm 0.32

390.00

2412

Front-1x1.7x0.15=0.255sqm.+ Sides-2xO. 15x0.15= 0.045sqm. = 0.300sqm.+ Add wastage @5% = 0.015sqm. = 0.315sqm. Say 0.32 sqm. 6mm thick commercial ply wood Top-lxl.7x0.15= 0.255sqm.+ Add wastage @ 5% = 0.013 sqm. = 0.268 sqm. Say 0.27 sqm. Ply wood 5 ply with commercial ply on both faces 6 mm thick sqm

0.27

340.00

1.65 2.00 0.52 8.06 0.00032 2.00

67.00 6.00 1.49 1.49 35000.00 10.00

Code

7034 7035 9999 9999 2505 7048

DSR-12

Nickle plated M.S. pipe 20 mm dia. Nickle plated M.S. Brackets for curtain rod 20 each mm Carriage of material M.S. flat 25x3mm and 10cm long over brackets Hollock wood in planks Rawl plug 50 mm (designation 10 no) LABOUR-

metre each L.S. L.S. cum each

Rate

Page 262 of 2298

0112 0114 0130 9999

Carpenter 2nd class Beldar Mistry Sundries

Day Day Day L.S.

0.18 0.18 0.11 2.73

Add water charges @ 1% on

273.00 247.00 301.00 1.49 Total: 513.91

Add C.P & OH @15% on 519.05 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 298.46 Rs 298.45

Item Code: 9.43 P/F 18mm thick, 150mm wide pelmet of Coir veneer board i/c top cover of 6mm coir veneer board, nickle plated MS pipe 20 mm dia curtain rod, nickel plated brackets Details of Cost for : 2.00 m Code Description Unit Quantity Rate Details of cost for a pelmet 2m long MATERIALS(i) 18mm thick Coir veneered board Front-1 x 1.7x0.15= 0.255sqm.+ Sides-2xO. 15x0.15= 0.045sqm. = 0.300sqm.+ Add wastage @5% = 0.015sqm. = 0.315sqm. Say 0.32 sqm. 7556 Coir veneered board 18mm thick sqm 0.32 950.00 6mm thick commercial ply wood Top-1 x 1.7x0.15= 0.255sqm.+ Add wastage @ 5% = 0.013 sqm. = 0.268 sqm. Say 0.27 sqm. 7553 Coir veneered board 6mm thick sqm 0.27 367.00 7034 Nickle plated M.S. pipe 20 mm dia. metre 1.65 67.00 7035 Nickle plated M.S. Brackets for curtain rod 20 mm each 2.00 6.00 9999 Carriage of material L.S. 0.52 1.49 9999 M.S. flat 25x3mm and 10cm long over brackets L.S. 8.06 1.49 2505 Hollock wood in planks cum 0.00032 35000.00 7048 Rawl plug 50 mm (designation 10 no) each 2.00 10.00 LABOUR0112 Carpenter 2nd class Day 0.18 273.00 0114 Beldar Day 0.18 247.00 0130 Mistry Day 0.11 301.00 9999 Sundries L.S. 2.73 1.49 Total: Add water charges @ 1% on 700.40 Add C.P & OH @15% on 707.40 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 406.76 Rs 406.75

Item Code: 9.44.1 Extra for using veneered particle board Non-Decorative veneer both face Code

DSR-12

Description Details of cost for a pelmet 2m long MATERIALS-

Details of Cost for : 2.00 m Unit Quantity

Rate

Page 263 of 2298

0347

(i) 18mm thick particle board (medium density exterior grade) Front-lxl.7x0.15= 0.255sqm.+ Sides-2xO. 15x0.15= 0.045sqm. = 0.300sqm.+ Add wastage @5% = 0.015sqm. = 0.315sqm. Say 0.32 sqm. Extra cost for commercial veneering both

sqm

0.32

Add water charges @ 1% on

155.00 Total: 49.60

Add C.P & OH @15% on 50.10 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 28.81 Rs 28.80

Item Code: 9.44.2 Extra for using veneered particle board particle board, decorative veneering on both face Details of Cost for : 2.00 m Code Description Unit Quantity Details of cost for a pelmet 2m long MATERIALS(i) 18mm thick particle board (medium density exterior grade) Front-lxl.7x0.15= 0.255sqm.+ Sides-2xO. 15x0.15= 0.045sqm. = 0.300sqm.+ Add wastage @5% = 0.015sqm. = 0.315sqm. Say 0.32 sqm. 0348 Extra cost for prelaminated particle board with sqm 0.32 teak finish both sides Add water charges @ 1% on

Rate

455.00 Total: 145.60

Add C.P & OH @15% on 147.06 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 84.56 Rs 84.55

Item Code: 9.45 P/F teak wood lipping of size 25 x 3 mm in pelmet Code

7049 0112 0114

Description Details of cost for 10 metre MATERIALSLipping with teak wood 25x3 mm LABOURCarpenter 2nd class Beldar

Details of Cost for : 10.00 m Unit Quantity

metre Day Day

Rate

10.00

20.00

0.25 0.25

273.00 247.00 Total: 330.00

Add water charges @ 1% on

Add C.P & OH @15% on 333.30 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 38.33 Rs 38.35

Page 264 of 2298

Item Code: 9.46.1 P/F CP brass curtain rods 1.25mm thick, wooden plugs 12 mm diametre Code

0590 7023 9999 9999

09.032 9999 9999

Details of Cost for : 2.00 m Description Unit Quantity Details of cost for 2m long MATERIALSC.P. brass curtain rod 12 mm dia metre 2.00 C.P. brass brackets each 2.00 C.P. brass screws L.S. 4.03 Carriage L.S. 1.56 Wooden plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) Providing 50x50x50mm 2nd class teak wood plugs fixing in 2.00 CM 1:3 Labour L.S. 2.73 Sundries L.S. 1.56 Add water charges @ 1% except on [A] i.e on

Rate

180.00 7.00 1.49 1.49

17.42 1.49 1.49 Total: 388.71

Add C.P & OH @15% except on [A] i.e on 392.60 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 243.17 Rs 243.15

Item Code: 9.46.2 P/F CP brass curtain rods 1.25mm thick, wooden plugs 20 mm diametre Code

0591 7023 9999 9999

09.032 9999 9999

Details of Cost for : 2.00 m Description Unit Quantity Details of cost for 2m long MATERIALSC.P. brass curtain rod 20 mm dia metre 2.00 C.P. brass brackets each 2.00 C.P. brass screws L.S. 4.03 Carriage L.S. 1.56 Wooden plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) Providing 50x50x50mm 2nd class teak wood plugs fixing in 2.00 CM 1:3 Labour L.S. 2.73 Sundries L.S. 1.56 Add water charges @ 1% except on [A] i.e on

Rate

250.00 7.00 1.49 1.49

17.42 1.49 1.49 Total: 528.71

Add C.P & OH @15% except on [A] i.e on 534.00 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 324.47 Rs 324.45

Item Code: 9.46.3 P/F CP brass curtain rods 1.25mm thick, wooden plugs 25 mm diametre Code

DSR-12

Description Details of cost for 2m long MATERIALS-

Details of Cost for : 2.00 m Unit Quantity

Rate

Page 265 of 2298

0592 7023 9999 9999

09.032 9999 9999

C.P. brass curtain rod 25 mm dia metre C.P. brass brackets each C.P. brass screws L.S. Carriage L.S. Wooden plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3 Labour L.S. Sundries L.S.

2.00 2.00 4.03 1.56

330.00 7.00 1.49 1.49

2.00

17.42

2.73 1.56

1.49 1.49 Total: 688.71

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 695.60 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 417.39 Rs 417.35

Item Code: 9.47.1 P/F nickel plated MS pipe curtain rods 20 mm dia (heavy type) Code

7034 7035 9999 9999 7048 9999 9999

Description Details of cost for 2m long. MATERIALS : Nickel plated M.S. pipe 20 mm dia. (ii) Nickel plated M.S. bracket (iii) Screws (iv) Carriage (v) Rawl plug 50 mm (designation 10 no) (vi) Labour including fixing rawl plug (vii) Sundries

Details of Cost for : 2.00 m Unit Quantity

metre each L.S. L.S. each L.S. L.S.

2.00 2.00 4.03 1.56 2.00 5.20 1.56

Add water charges @ 1% on

Rate

67.00 6.00 1.49 1.49 10.00 1.49 1.49 Total: 184.39

Add C.P & OH @15% on 186.23 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 107.08 Rs 107.10

Item Code: 9.47.2 P/F nickel plated MS pipe curtain rods 25 mm dia (heavy type) Code

7033 7036 9999 9999 7048 9999 9999

DSR-12

Description Details of cost for 2m long. MATERIALS: Nickel plated M.S. pipe 25 mm dia. (ii) Nickel plated M.S. bracket (iv) Screws (iv) Carriage (v) Rawl plug 50 mm (designation 10 no) (vi) Labour including fixing rawl plug (vii) Sundries

Details of Cost for : 2.00 m Unit Quantity

metre each L.S. L.S. each L.S. L.S.

2.00 2.00 4.03 1.56 2.00 5.20 1.56

Rate

Add water charges @ 1% on

75.00 7.00 1.49 1.49 10.00 1.49 1.49 Total: 202.39

Add C.P & OH @15% on

204.41

Page 266 of 2298

Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 117.54 Rs 117.55

Item Code: 9.48.1 P/F MS grills of required pattern in frames of windows fixed by welding Code

1003

1008 2205 9999 9999

13.050.03

0102 0114

Description Details of cost for a grill 90x120cm = 1.08sqm. MaterialM.S. bar 16mm diameter- 11x86cm = 9.46m. @ 1.58kg/m= 14.95kg+ Add wastage @ 10% = 1.50kg. = 16.45kg. Say 0.165 quintal M.S.bar M.S. flat 25x3.15mm 2xl20cm = 2.40m+ 2x90cm= 1.80m+ lxl20cm= 1.20m+ 2x15cm = M.S. flat Carraige of Steel 0.165 + 0.04 = 0.205 q = Sundries Welding charges Priming coat : Area = 1x0.91x1.20x1=1.08sqm

Details of Cost for : 18.54 Kg Unit Quantity

quint quint tonne L.S. L.S.

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise LABOUR: Blacksmith 1st class Day Beldar Day

Rate

0.165 0.04 0.02 26.91 19.76

4000.00 4200.00 77.87 1.49 1.49

1.08

20.72

0.86 1.10

301.00 247.00 Total: 1429.66

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1443.96 Cost for 18.54 Kg Rate per One Kg: Rate as per DSR-12:

Rs 90.77 Rs 90.75

Item Code: 9.48.2 P/F MS grills of required pattern in frames of windows Fixed to openings/wooden frames with rawl plugs screws etc

Code

Description

Details of Cost for : 18.54 Kg Unit Quantity

Rate

MATERIALS: M.S. bar 16mm dia. 11x86cm = 9.46m. @ 1.58kg/m= 14.95kg+ Add wastage @ 10% = 1.50kg. = 16.45kg. Say 0.165quintal 1003

M.S. bar quint

0.165

4000.00

M.S. flat 25x3.15mm

DSR-12

Page 267 of 2298

2xl20cm = 2.40m+ 2x90cm= 1.80m+ lxl20cm= 1.20m+ 2xl5cm = 0.30m =5.70m 5.70m @ 0.63kg/m = 3.59kg+ Add wastage @ 10% = 0.36kg. = 3.95kg. Say 4 kg. or 0.04 quintal 1008

M.S. flat

2205

Carriage of steel 0.165 + 0.04 = 0.205 q = 0.0205 tonne. Say 0.02 tonne

9999 9999

Sundries Welding charges

quint

0.04

4200.00

tonne L.S.

0.02 26.91

77.87 1.49

L.S.

19.76

1.49

Priming coat : Area = 1x0.90x1.20x1 = 1.08sqm 13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise LABOUR :

1.08

20.72

0102 0114 7048 9999

Blacksmith 1st class Beldar Rawl plug 50 mm (designation 10 no.) Fixing of rawl plugs

Day Day each

0.86 1.10 8.00

301.00 247.00 10.00

L.S.

26.00

1.49 Total: 1548.40

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1563.88 Cost for 18.54 Kg Rate per One Kg: Rate as per DSR-12:

Rs 98.21 Rs 98.20

Item Code: 9.49 P/F expanded metal 20x60mm strands 3.2mm wide & 1.6mm thick for windows etc i/c 62x19mm beading of 2nd class teak wood

Code

1015 9999

13.050.03

DSR-12

Description Details of cost for a window of size 140x110cm =1.54sqm. MATERIALSExpended metal -20x60mm mesh 3.2mm wide = 1.4x1.1m = 1.54sqm.+ Add wastage @ 10% = 0.15sqm. = 1.69 sqm. Expended metal -. Carriage Priming Coat : Area = 1.40x1.10x1.00 =1.54sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Second class teak wood beading 5mx62mmx19mm = 0.0059cum.+

Details of Cost for : 1.54 Sqm Unit Quantity

Rate

sqm L.S.

1.69 1.82

270.00 1.49

Sqm

1.54

20.72

Page 268 of 2298

1190 2204 0112 0114 9999

Add wastage @ 10% = 0.00059cum. = 0.00649cum. Say 6 cudm. Second class teak wood Carriage of timber LABOURCarpenter 2nd class Beldar Sundries

cum cum

0.006 0.006

72000.00 100.11

Day Day L.S.

0.33 0.25 26.91

273.00 247.00 1.49 Total: 1083.55

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1094.39 Cost for 1.54 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 837.96 Rs 837.95

Item Code: 9.50 P/F hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 kg per sqm to window frames etc. i/c 62 x 19mm beading of IInd class teak wood. Details of Cost for : 1.54 Sqm Code Description Unit Quantity Rate Details of cost for a window of size 140x110cm =1.54sqm. MATERIALSHard drawn steel wire fabric -20x60mm mesh 3.2mm wide = 1.4x1.1m= 1.54sqm.+ Add wastage @ 10% = 0.15sqm. = 1.69 sqm. 1021 Hard drawn steel wire fabric sqm 1.69 430.00 9999 Carriage of wire fabric L.S. 1.82 1.49 Priming Coat : Area = 1.40x1.10x1.00 =1.54sqm 13.050.03 Applying priming coat : With ready mixed red oxide zinc Sqm 1.54 20.72 chromate primer on steel galvanise Second class teak wood beading 5mx62mmx19mm = 0.00059cum.+ Add wastage @ 10% = 0.00059cum. = 0.000649cum. Say 6 cudm. 1190 Second class teak wood cum 0.006 72000.00 2204 Carriage of timber cum 0.006 100.11 LABOUR0112 Carpenter 2nd class Day 0.33 273.00 0114 Beldar Day 0.25 247.00 9999 Sundries L.S. 19.76 1.49 Total: Add water charges @ 1% except on [A] i.e on 1343.29 Add C.P & OH @15% except on [A] i.e on 1356.72 Cost for 1.54 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1033.86 Rs 1033.85

Item Code: 9.51.1 P/F fly proof galvanised M.S. wire gauze to windows using galvanised M.S wire gauze with average width of aperture 1.4 mm of dia. 0.63 mm :- With 2nd class teak wood beading 62x19 mm.

DSR-12

Page 269 of 2298

Code

7029 9999

1190 2204 0112 0114 9999

Description Details of cost for a window of size 140x110cm =1.54sqm. MATERIALSWire gauge -20x60mm mesh 3.2mm wide = 1.4x1.1 m = 1.54sqm.+ Add wastage @ 10% = 0.15sqm. = 1.69 sqm. Wire gauge Carriage of wire fabric Second class teak wood beading 5mx62mmx19mm = 0.0059cum.+ Add wastage @ 10% = 0.00059cum. = 0.00649cum. Say 6 cudm. Second class teak wood Carriage of timber LABOURCarpenter 2nd class Beldar Sundries

Details of Cost for : 1.54 Sqm Unit Quantity

Rate

sqm L.S.

1.69 1.82

230.00 1.49

cum cum

0.006 0.006

72000.00 100.11

Day Day L.S.

0.33 0.25 19.76

273.00 247.00 1.49 Total: 1005.29

Add water charges @ 1% on

Add C.P & OH @15% on 1015.34 Cost for 1.54 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 758.21 Rs 758.20

Item Code: 9.51.2 P/F fly proof galvanised M.S. wire gauze to windows using galvanised M.S wire gauze with average width of aperture 1.4 mm of dia. 0.63 mm :- With 12 mm mild steel U beading. Details of Cost for : 1.54 Sqm Code Description Unit Quantity Rate Details of cost for a window of size 140x110cm =1.54sqm. MATERIALSWire gauge -20x60mm mesh 3.2mm wide = 1.4x1.1m = 1.54sqm.+ Add wastage @ 10% = 0.15sqm. = 1.69 sqm. 7029 Wire gauge sqm 1.69 230.00 9999 Carriage of wire fabric L.S. 1.82 1.49 7349 12 mm mild steel U beading metre 5.00 14.00 LABOUR0112 Carpenter 2nd class Day 0.33 273.00 0114 Beldar Day 0.25 247.00 9999 Sundries L.S. 19.76 1.49 Total: Add water charges @ 1% on 642.69 Add C.P & OH @15% on 649.12 Cost for 1.54 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 484.73 Rs 484.75

Page 270 of 2298

Item Code: 9.52 Deduct for fixing 75 x 25 mm hard drawn steel wire fabric of weight 7.75 Kg per sqm in panelled and glazed door and window shutter instead of glass sheet 10 Kg/sqm (4 mm thick). Details of Cost for : -1.00 Sqm Code Description Unit Quantity Rate Details of cost for 1 sqm. MATERIALS1021 Hard drawn steel wire fabric sqm 1.00 430.00 2406 Glass 10 kg/sqm (4 mm) sqm -1.00 310.00 Total: Add water charges @ 1% on 120.00 Add C.P & OH @15% on 121.20 Cost for -1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

-Rs 139.38 -Rs 139.40

Item Code: 9.53 P/F Flat iron hold fast i/c embedding in CC blocks Code

1008 9999

04.002.05 9999 0103 0123 0114

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for 1 hold fast MATERIALSM.S.flat 40x5mm 40cm long @ 1.68 kg/m = quint 0.0067 0.672 kg = 0.0067 qunital Carriage of steel L.S. 1.82 Cement concrete 1:3:6 30xl0xl5cm= 0.0045cum.+ Add wastage @ 10% = 0.00045cum. = 0.00495cum. Say 0.005cum. P/L CC walls, columns, string courses, coping, bed blocks, 0.005 window sills etc. up to floor f Bolts and nuts L.S. 5.46 LABOURBlacksmith 2nd class Day 0.03 Mason 1st class Day 0.03 Beldar Day 0.03 Add water charges @ 1% except on [A] i.e on

Rate

4200.00 1.49

4782.36 1.49 273.00 301.00 247.00 Total: 63.62

Add C.P & OH @15% except on [A] i.e on 64.26 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 97.81 Rs 96.75

Item Code: 9.54.1 Providing beams i/c hoisting, fixing in position & applying wood preservating for the unexposed surfaces, etc. complete with :- Sal wood. Details of Cost for : 0.203 Cum Code Description Unit Quantity Rate Details of cost for a beam 450x30x15cm = 0.203cum. or203cudm. MATERIALSSal wood = 203 cudm.+ Add wastage @ 2% = 4.06cudm. = 207.06cudm. Say 207.1 cudm.

DSR-12

Page 271 of 2298

1199 2204 13.057.01

0112 0114 0100 9999

Sal wood cum Carriage of timber cum Priming coat (wood preservative) Painting with oil type wood preservative : New work (two or more coats). LABOURCarpenter 2nd class Day Beldar Day Bandhani Day Sundries L.S.

0.2071 0.207

50000.00 100.11

0.54

18.68

0.70 1.45 0.70 26.91

273.00 247.00 260.00 1.49 Total: 11147.07

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 11258.54 Cost for 0.203 Cum Rate per One Cum: Rate as per DSR-12:

Rs 63829.61 Rs 63829.70

Item Code: 9.54.2 Providing beams i/c hoisting, fixing in position & applying wood preservating for the unexposed surfaces, etc. complete with :Hollock wood. Details of Cost for : 0.203 Cum Code Description Unit Quantity Rate Details of cost for a beam 450x30x15cm = 0.203cum. or203cudm. MATERIALSHollock wood = 203 cudm.+ Add wastage @ 2% = 4.06cudm. = 207.06cudm. Say 207.1 cudm. 2466 Hollock wood cum 0.2071 31000.00 2204 Carriage of timber cum 0.207 100.11 Priming coat (wood preservative) 13.057.01 Painting with oil type wood preservative : New work (two or 0.54 18.68 more coats). LABOUR0112 Carpenter 2nd class Day 0.70 273.00 0114 Beldar Day 1.45 247.00 0100 Bandhani Day 0.70 260.00 9999 Sundries L.S. 26.91 1.49 Total: Add water charges @ 1% except on [A] i.e on 7212.17 Add C.P & OH @15% except on [A] i.e on 7284.29 Cost for 0.203 Cum Rate per One Cum: Rate as per DSR-12:

Rs 41315.37 Rs 41315.00

Item Code: 9.55.1 P/F M.S. pressed butt hinges bright finished with necessary screws etc. complete :- 125 x 65 x 2.12 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for ten MATERIALS0594 Butt hinges 125x65x2.12 mm 10 No 10.00 0635 Iron screws 50 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73

DSR-12

Rate

130.00 60.00 1.49

Page 272 of 2298

0112 0114

LABOURCarpenter 2nd class Beldar

Day Day

0.14 0.09

Add water charges @ 1% on

273.00 247.00 Total: 242.52

Add C.P & OH @15% on 244.95 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 28.17 Rs 28.15

Item Code: 9.55.2 P/F M.S. pressed butt hinges bright finished with necessary screws etc. complete :- 100 x 58 x 1.90 mm._x000D_

0637

Details of Cost for : 10.00 Nos Description Unit Quantity Bright finished or black enameled mild steel butt hinges 10 No 10.00 100x58x1.90 mm Bright finished or black enameled mild steel screws 40 mm 100 N 80.00

9999

Carriage of materials

Code 0595

Rate 80.00 50.00

Labour : 0112 0114

Carpenter 2nd class Beldar

L.S. Day Day

2.73 0.14 0.09

Add water charges @ 1% on

1.49 273.00 247.00 Total: 184.52

Add C.P & OH @15% on 186.37 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 21.43 Rs 21.45

Item Code: 9.55.3 P/F M.S. pressed butt hinges bright finished with necessary screws etc. complete :- 75 x 47 x 1.70 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for ten MATERIALS0596 Butt hinges 175x47x1.7 mm 10 No 10.00 0638 Iron screws 30 mm 100 N 60.00 9999 Carriage of materials L.S. 1.82 LABOUR0112 Carpenter 2nd class Day 0.14 0114 Beldar Day 0.09 Add water charges @ 1% on

Rate

60.00 40.00 1.49 273.00 247.00 Total: 147.16

Add C.P & OH @15% on 148.63 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 17.09 Rs 17.10

Page 273 of 2298

Item Code: 9.55.4 P/F M.S. pressed butt hinges bright finished with necessary screws etc. complete :- 50 X 37 X 1.50 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for ten MATERIALS0597 Butt hinges 50x37x1.5 mm 10 No 10.00 0640 Iron screws 20 mm 100 N 40.00 9999 Carriage of materials L.S. 0.91 LABOUR0112 Carpenter 2nd class Day 0.08 Add water charges @ 1% on

Rate

45.00 25.00 1.49 273.00 Total: 78.20

Add C.P & OH @15% on 78.98 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 9.08 Rs 9.10

Item Code: 9.56.1 P/F M.S. pressed parliamentary hinges bright finished with n/a screws etc. complete :- 125 x 90 x 4.00 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for ten MATERIALS8222 M.S. heavy weight but hinges 125x90x4.0mm 10 No 10.00 IS: 1341 marked. 0635 Iron screws 50 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter 2nd class Day 0.14 0114 Beldar Day 0.09 Add water charges @ 1% on

Rate

320.00 60.00 1.49 273.00 247.00 Total: 432.52

Add C.P & OH @15% on 436.85 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 50.24 Rs 50.25

Item Code: 9.56.2 P/F M.S. pressed parliamentary hinges bright finished with n/a screws etc. complete :- 100 x 75 x 3.50 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for ten MATERIALS8223 M.S. heavy weight butt hinges 100x75x3.5 10 No 10.00 mm IS: 1341 marked 0637 Iron screws 40 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter 2nd class Day 0.14 0114 Beldar Day 0.09 Add water charges @ 1% on

DSR-12

Rate

160.00 50.00 1.49 273.00 247.00 Total: 264.52

Page 274 of 2298

Add C.P & OH @15% on 267.17 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 30.73 Rs 30.70

Item Code: 9.56.3 P/F M.S. pressed parliamentary hinges bright finished with n/a screws etc. complete :- 75 x 60 x 3.10 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for ten MATERIALS8224 M.S. heavy weight butt hinges 75x60x3.1 mm 10 No 10.00 IS: 1341 marked 0638 Iron screws 30 mm 100 N 60.00 9999 Carriage of materials L.S. 1.82 LABOUR0112 Carpenter 2nd class Day 0.14 0114 Beldar Day 0.09 Add water charges @ 1% on

Rate

83.00 40.00 1.49 273.00 247.00 Total: 170.16

Add C.P & OH @15% on 171.86 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 19.76 Rs 19.75

Item Code: 9.56.4 P/F M.S. pressed parliamentary hinges bright finished with n/a screws etc. complete :- 50 x 40 x 2.50 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for ten MATERIALS8225 M.S. heavy weight butt hinges 50x40x2.5 mm IS: 1341 marked 10 No 10.00

70.00

0640 9999

40.00 0.91

25.00 1.49

0.08

273.00 Total: 103.20

0112

Iron screws 20 mm Carriage of materials LABOURCarpenter 2nd class

100 N L.S. Day

Add water charges @ 1% on

Rate

Add C.P & OH @15% on 104.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 11.99 Rs 12.00

Item Code: 9.57.1 P/F oxidised M.S. pressed butt hinges with necessary screws etc. complete :- 125 x 65 x 2.12 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0642 M.S. butt hinges (oxidised) 125x65x2.12 mm 10 No 10.00 0682 Iron screws (oxidised) 50 mm 100 N 80.00

DSR-12

Rate

130.00 70.00

Page 275 of 2298

9999 0112 0114

Carriage of materials LABOURCarpenter II class Beldar

L.S.

3.64

1.49

Day Day

0.14 0.09

273.00 247.00 Total: 251.87

Add water charges @ 1% on

Add C.P & OH @15% on 254.39 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 29.26 Rs 29.25

Item Code: 9.57.2 P/F oxidised M.S. pressed butt hinges with necessary screws etc. complete :- 100 x 58 1.90 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0643 M.S. butt hinges (oxidised) 100x58x1.9 mm 10 No 10.00 0683 Iron screws (oxidised) 40 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter II class Day 0.14 0114 Beldar Day 0.09 Add water charges @ 1% on

Rate

80.00 50.00 1.49 273.00 247.00 Total: 184.52

Add C.P & OH @15% on 186.37 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 21.43 Rs 21.45

Item Code: 9.57.3 P/F oxidised M.S. pressed butt hinges with necessary screws etc. complete :- 75 x 47 x 1.70 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0644 M.S. butt hinges (oxidised) 75x47x1.7 mm 10 No 10.00 0684 Iron screws (oxidised) 30 mm 100 N 60.00 9999 Carriage of materials L.S. 1.82 LABOUR0112 Carpenter II class Day 0.14 0114 Beldar Day 0.09 Add water charges @ 1% on

Rate

55.00 45.00 1.49 273.00 247.00 Total: 145.16

Add C.P & OH @15% on 146.61 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 16.86 Rs 16.85

Item Code: 9.57.4 P/F oxidised M.S. pressed butt hinges with necessary screws etc. complete :- 50 x 37 x 1.50 mm.

DSR-12

Page 276 of 2298

Code

0645 0686 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. butt hinges (oxidised) 50x37x1.5 mm Iron screws (oxidised) 20 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day

Rate

10.00 40.00 0.91

45.00 30.00 1.49

0.08

273.00 Total: 80.20

Add water charges @ 1% on

Add C.P & OH @15% on 81.00 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 9.32 Rs 9.30

Item Code: 9.58.1 P/F oxidised MS pressed parli- amentary hinges with necessary screws etc. complete :- 150x125x27x2.80 mm Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate Details of cost for 10 nos. MATERIALS0646 M.S. parliamentary hinges (oxidised) 10 No 10.00 320.00 150x125x27x2.8 mm 0683 Iron screws (oxidised) 40 mm 100 N 80.00 50.00 9999 Carriage of materials L.S. 2.73 1.49 LABOUR0112 Carpenter II class Day 0.14 273.00 0114 Beldar Day 0.14 247.00 Total: Add water charges @ 1% on 436.87 Add C.P & OH @15% on 441.24 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 50.74 Rs 50.75

Item Code: 9.58.2 P/F oxidised MS pressed parli- amentary hinges with necessary screws etc. complete :- 125x125x27x2.80 mm Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate Details of cost for 10 nos. MATERIALS0647 M.S. parliamentary hinges (oxidised) 10 No 10.00 300.00 125x125x27x2.8 mm 0683 Iron screws (oxidised) 40 mm 100 N 80.00 50.00 9999 Carriage of materials L.S. 2.73 1.49 LABOUR0112 Carpenter II class Day 0.14 273.00 0114 Beldar Day 0.14 247.00 Total: Add water charges @ 1% on 416.87 Add C.P & OH @15% on 421.04 Cost for 10.00 Nos

DSR-12

Page 277 of 2298

Rate per Each: Rate as per DSR-12:

Rs 48.42 Rs 48.40

Item Code: 9.58.3 P/F oxidised MS pressed parli- amentary hinges with necessary screws etc. complete :- 100x125x27x2.80 mm Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate Details of cost for 10 nos. MATERIALS0648 M.S. parliamentary hinges (oxidised) 10 No 10.00 225.00 100x125x27x2.8 mm 0683 Iron screws (oxidised) 40 mm 100 N 80.00 50.00 9999 Carriage of materials L.S. 2.73 1.49 LABOUR0112 Carpenter II class Day 0.14 273.00 0114 Beldar Day 0.14 247.00 Total: Add water charges @ 1% on 341.87 Add C.P & OH @15% on 345.29 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 39.71 Rs 39.70

Item Code: 9.58.4 P/F oxidised MS pressed parli- amentary hinges with necessary screws etc. complete :- 75 x 100 x 20 x 2.24 mm.

Code

0649 0684 9999 0112 0114

Description Details of cost for 10 nos. MATERIALSM.S. parliamentary hinges (oxidised) 75x100x20x2.24 mm Iron screws (oxidised) 30 mm Carriage of materials LABOURCarpenter 2nd class Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

10 No

10.00

190.00

100 N L.S.

60.00 2.73

45.00 1.49

0.14 0.14

273.00 247.00 Total: 293.87

Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 296.81 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 34.13 Rs 34.15

Item Code: 9.59.1 P/F oxidised M.S single acting spring hinges with necessary screws etc. complete :- 150 mm._x000D_ Details of Cost for : 10.00 Nos Code Description Unit Quantity 0650 Oxidised mild steel single acting spring hinges 150 mm each 10.00 0682 Oxidised mild steel screws 50 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73

DSR-12

Rate 105.00 70.00 1.49

Page 278 of 2298

LABOUR : 0112 0114

Carpenter 2nd class Beldar

Day Day

0.40 0.20

Add water charges @ 1% on

273.00 247.00 Total: 1268.67

Add C.P & OH @15% on 1281.36 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 147.36 Rs 147.35

Item Code: 9.59.2 P/F oxidised M.S single acting spring hinges with necessary screws etc. complete :- 125 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0651 M.S. single acting spring hinges (oxidised) each 10.00 125 mm 0682 Iron screws (oxidised) 50 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter II class Day 0.40 0114 Beldar Day 0.20 Add water charges @ 1% on

Rate

100.00 70.00 1.49 273.00 247.00 Total: 1218.67

Add C.P & OH @15% on 1230.86 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 141.55 Rs 141.55

Item Code: 9.59.3 P/F oxidised M.S single acting spring hinges with necessary screws etc. complete :- 100 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0652 M.S. single acting spring hinges (oxidised) each 10.00 100 mm 0683 Iron screws (oxidised) 40 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter II class Day 0.40 0114 Beldar Day 0.20 Add water charges @ 1% on

Rate

80.00 50.00 1.49 273.00 247.00 Total: 1002.67

Add C.P & OH @15% on 1012.70 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 116.46 Rs 116.45

Page 279 of 2298

Item Code: 9.60.1 P/F oxidised M.S double acting spring hinges with necessary screws etc. complete :- 150 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0653 M.S. double acting spring hinges (oxidised) each 10.00 150 mm 0682 Iron screws (oxidised) 50 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter II class Day 0.40 0114 Beldar Day 0.20 Add water charges @ 1% on

Rate

110.00 70.00 1.49 273.00 247.00 Total: 1318.67

Add C.P & OH @15% on 1331.86 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 153.16 Rs 153.15

Item Code: 9.60.2 P/F oxidised M.S double acting spring hinges with necessary screws etc. complete :- 125 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0654 M.S. double acting spring hinges (oxidised) each 10.00 125 mm 0682 Iron screws (oxidised) 50 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter II class Day 0.40 0114 Beldar Day 0.20 Add water charges @ 1% on

Rate

105.00 70.00 1.49 273.00 247.00 Total: 1268.67

Add C.P & OH @15% on 1281.36 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 147.36 Rs 147.35

Item Code: 9.60.3 P/F oxidised M.S double acting spring hinges with necessary screws etc. complete :- 100 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0655 M.S. double acting spring hinges (oxidised) each 10.00 100 mm 0683 Iron screws (oxidised) 40 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter II class Day 0.40 0114 Beldar Day 0.20

DSR-12

Rate

85.00 50.00 1.49 273.00 247.00 Total:

Page 280 of 2298

Add water charges @ 1% on

1052.67

Add C.P & OH @15% on 1063.20 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 122.27 Rs 122.25

Item Code: 9.61.1 P/F M.S paino hinges . Overall width 35 mm. Code

0656 0686 9999 0112 0114

Description Details of cost for 1 meter MATERIALSM.S. piano hinges (oxidised) 35 mm wide Iron screws (oxidised) 20 mm Carriage of materials LABOURCarpenter II class Beldar

Details of Cost for : 1.00 m Unit Quantity

metre 100 N L.S. Day Day

Rate

1.00 30.00 1.82

40.00 30.00 1.49

0.14 0.09

273.00 247.00 Total: 112.16

Add water charges @ 1% on

Add C.P & OH @15% on 113.28 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 130.27 Rs 130.25

Item Code: 9.61.2 P/F M.S paino hinges . Overall width 50 mm. Code

7485 0686 9999 0112 0114

Description Details of cost for 1 meter MATERIALSM.S. piano hinges (oxidised) 50 mm wide Iron screws (oxidised) 20 mm Carriage of materials LABOURCarpenter II class Beldar

Details of Cost for : 1.00 m Unit Quantity

metre 100 N L.S. Day Day

Rate

1.00 30.00 1.82

39.00 30.00 1.49

0.14 0.09

273.00 247.00 Total: 111.16

Add water charges @ 1% on

Add C.P & OH @15% on 112.27 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 129.11 Rs 129.10

Item Code: 9.61.3 P/F M.S paino hinges . Overall width 65 mm. Code

7486

DSR-12

Description Details of cost for 1 meter MATERIALSM.S. piano hinges (oxidised) 65 mm wide

Details of Cost for : 1.00 m Unit Quantity

metre

1.00

Rate

49.00

Page 281 of 2298

0686 9999 0112 0114

Iron screws (oxidised) 20 mm Carriage of materials LABOURCarpenter II class Beldar

100 N L.S. Day Day

30.00 1.82

30.00 1.49

0.14 0.09

273.00 247.00 Total: 121.16

Add water charges @ 1% on

Add C.P & OH @15% on 122.37 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 140.73 Rs 140.75

Item Code: 9.62.1 P/F oxidised M.S sliding door bolts :- 300 x 16 mm . Code

0660 7040 0641 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. ‘sliding door bolts (oxidised) 300x16 mm Iron screws (oxidised) 35 mm Bolts and nuts 50x6 mm Carriage of materials & sundries LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N each L.S. Day

Rate

10.00 120.00 40.00 6.37

90.00 40.00 5.00 1.49

0.25

273.00 Total: 1225.74

Add water charges @ 1% on

Add C.P & OH @15% on 1238.00 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 142.37 Rs 142.35

Item Code: 9.62.2 P/F oxidised M.S sliding door bolts :- 250 x 16 mm . Code

0661 7040 0641 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. ‘sliding door bolts (oxidised) 250x16 mm Iron screws (oxidised) 35 mm Bolts and nuts 50x6 mm Carriage of materials & sundries LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N each L.S. Day

Rate

10.00 100.00 40.00 6.37

80.00 40.00 5.00 1.49

0.25

273.00 Total: 1117.74

Add water charges @ 1% on

Add C.P & OH @15% on 1128.92 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 129.83 Rs 129.85

Item Code: 9.63.1

DSR-12

Page 282 of 2298

P/F oxidised M.S tower bolt :- 250 x 10 mm . Code

0664 0684 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. tower bolts (oxidised) 250x10 mm Iron screws (oxidised) 30 mm Carriage of material LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 100.00 3.64

40.00 45.00 1.49

0.10

273.00 Total: 477.72

Add water charges @ 1% on

Add C.P & OH @15% on 482.50 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 55.49 Rs 55.50

Item Code: 9.63.2 P/F oxidised M.S tower bolt :- 200 x 10 mm . Code

0665 0684 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. tower bolts (oxidised) 200x10 mm Iron screws (oxidised) 30 mm Carriage of material LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 80.00 2.73

35.00 45.00 1.49

0.10

273.00 Total: 417.37

Add water charges @ 1% on

Add C.P & OH @15% on 421.54 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 48.48 Rs 48.50

Item Code: 9.63.3 P/F oxidised M.S tower bolt :- 150 x 10 mm . Code

0666 0684 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. tower bolts (oxidised) 150x10 mm Iron screws (oxidised) 30 mm Carriage of material LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 60.00 2.73

25.00 45.00 1.49

0.10

273.00 Total: 308.37

Add water charges @ 1% on

Add C.P & OH @15% on 311.45 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 35.82 Rs 35.80

Page 283 of 2298

Item Code: 9.63.4 P/F oxidised M.S tower bolt :- 100 x 10 mm . Code

0667 0684 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. tower bolts (oxidised) 100 x 10 mm Iron screws (oxidised) 30 mm Carriage of material LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 60.00 2.73

20.00 45.00 1.49

0.08

273.00 Total: 252.91

Add water charges @ 1% on

Add C.P & OH @15% on 255.44 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 29.38 Rs 29.40

Item Code: 9.64 P / F ISI marked 85x 42 mm oxidised M.S. pull bolt lock Code

2449 9999 0112

Details of Cost for : 10.00 Nos Description Unit Quantity Details of cost for 10 nos. MATERIALSM.S. pull bolts (oxidised) of size 85x42 mm with bolts and each 10.00 nuts complete Carriage of materials & sundries L.S. 6.37 LABOURCarpenter II class Day 0.25 Add water charges @ 1% on

Rate

44.00 1.49 273.00 Total: 517.74

Add C.P & OH @15% on 522.92 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 60.14 Rs 60.15

Item Code: 9.65.1 P/F oxidised M.S door latches conforming to IS : 5930 with screws etc. complete :- 300 x 20 x 6 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0662 M.S. door latches (oxidised) 300x20x6 mm each 10.00 0685 Iron screws (oxidised) 25 mm 100 N 90.00 9999 Carriage of materials L.S. 3.64 LABOUR0112 Carpenter II class Day 0.12 Add water charges @ 1% on

Rate

45.00 35.00 1.49 273.00 Total: 519.68

Add C.P & OH @15% on 524.88 Cost for 10.00 Nos

DSR-12

Page 284 of 2298

Rate per Each: Rate as per DSR-12:

Rs 60.36 Rs 60.35

Item Code: 9.65.2 P/F oxidised M.S door latches conforming to IS : 5930 with screws etc. complete :- 250 x 20 x 6 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0663 M.S. door latches (oxidised) 250x20x6 mm each 10.00 0685 Iron screws (oxidised) 25 mm 100 N 90.00 9999 Carriage of materials L.S. 3.64 LABOUR0112 Carpenter II class Day 0.12 Add water charges @ 1% on

Rate

40.00 35.00 1.49 273.00 Total: 469.68

Add C.P & OH @15% on 474.38 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 54.55 Rs 54.55

Item Code: 9.66.1 P/F oxidised M.S handles :- 125 mm . Code

0668 0685 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. handle (oxidised) 125 mm Iron screws (oxidised) 25 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 40.00 2.73

17.00 35.00 1.49

0.06

273.00 Total: 204.45

Add water charges @ 1% on

Add C.P & OH @15% on 206.49 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 23.75 Rs 23.75

Item Code: 9.66.2 P/F oxidised M.S handles :- 100 mm . Code

0669 0685 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. handle (oxidised) 100 mm Iron screws (oxidised) 25 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

10.00 40.00 1.82

15.00 35.00 1.49

0.06

273.00 Total: 183.09

Add water charges @ 1% on

DSR-12

Rate

Page 285 of 2298

Add C.P & OH @15% on 184.92 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 21.27 Rs 21.25

Item Code: 9.66.3 Code

0670 0685 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. handle (oxidised) 75 mm Iron screws (oxidised) 25 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 40.00 1.82

14.00 35.00 1.49

0.06

273.00 Total: 173.09

Add water charges @ 1% on

Add C.P & OH @15% on 174.82 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 20.10 Rs 20.10

Item Code: 9.67.1 P/F oxidised M.S. hasp and staple :- 150 mm . Code

0679 0685 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. hasp and staple (safety type) (oxidised) 150 mm Iron screws (oxidised) 25 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day

Rate

10.00 80.00 1.82

120.00 35.00 1.49

0.08

273.00 Total: 172.55

Add water charges @ 1% on

Add C.P & OH @15% on 174.28 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 20.04 Rs 20.05

Item Code: 9.67.2 P/F oxidised M.S. hasp and staple :- 115 mm . Code

0680 0685 9999 0112

DSR-12

Description Details of cost for 10 nos. MATERIALSM.S. hasp and staple (safety type) (oxidised) 115 mm Iron screws (oxidised) 25 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day

Rate

10.00 70.00 1.82

100.00 35.00 1.49

0.08

273.00

Page 286 of 2298

Add water charges @ 1% on

Total: 149.05

Add C.P & OH @15% on 150.54 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 17.31 Rs 17.30

Item Code: 9.67.3 P/F oxidised M.S. hasp and staple :- 90 mm. Code

0681 0685 9999 0112

Description Details of cost for 10 nos. MATERIALSM.S. hasp and staple (safety type) (oxidised) 90 mm Iron screws (oxidised) 25 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day

Rate

10.00 70.00 1.82

75.00 35.00 1.49

0.08

273.00 Total: 124.05

Add water charges @ 1% on

Add C.P & OH @15% on 125.29 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 14.41 Rs 14.40

Item Code: 9.68.1 P/F oxidised MS casement stays (straight peg type) with n/a screws etc. complete :- 300 mm weighing not less than 200 gms.

Code 7063 0684 9999 0112

Description MATERIALSOxidised M.S. casement stay 300 mm Screws 30 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S. Day

Rate

10.00 40.00 0.91

21.00 45.00 1.49

0.10

273.00 Total: 256.66

Add water charges @ 1% on

Add C.P & OH @15% on 259.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 29.81 Rs 29.80

Item Code: 9.68.2 P/F oxidised MS casement stays (straight peg type) with n/a screws etc. complete :- 250 mm weighing not less than 150 gms.

Code

7064

DSR-12

Description Details of cost for 10 nos. MATERIALSOxidised M.S. casement stay 250 mm

Details of Cost for : 10.00 Nos Unit Quantity

each

10.00

Rate

18.00

Page 287 of 2298

0685 9999 0112

Screws 25 mm Carriage of materials LABOURCarpenter II class

100 N L.S. Day

40.00 0.91

35.00 1.49

0.10

273.00 Total: 222.66

Add water charges @ 1% on

Add C.P & OH @15% on 224.89 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 25.86 Rs 25.85

Item Code: 9.68.3 P/F oxidised MS casement stays (straight peg type) with n/a screws etc. complete :- 200 mm weighing not less than 120 gms.

Code

7065 0685 9999 0112

Description Details of cost for 10 nos. MATERIALSOxidised M.S. casement stay 200 mm Screws 25 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 40.00 0.91

17.00 35.00 1.49

0.10

273.00 Total: 212.66

Add water charges @ 1% on

Add C.P & OH @15% on 214.79 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 24.70 Rs 24.70

Item Code: 9.69 Code

7184 0685 9999 0112

Description Details of cost for 10 nos. MATERIALSOxidised M.S. safety chain Iron screws 25 mm Carriage of materials LABOURCarpenter II class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 60.00 0.91

60.00 35.00 1.49

0.10

273.00 Total: 649.66

Add water charges @ 1% on

Add C.P & OH @15% on 656.16 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 75.46 Rs 75.45

Item Code: 9.70.1 P/F Stainless steel butt hinges with stainless steel screws etc. complete : 125 x 64 x 1.90 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity

DSR-12

Rate

Page 288 of 2298

8215 8210 9999 0112 0114

Details of cost for 10 Nos MATERIALSS.S. butt hinges 125x64x 1.9 mm Stainless steel screws 50 mm Carriage of materials LABOURCarpenter 2nd class Beldar

10 No 100 N L.S. Day Day

10.00 80.00 2.73

240.00 240.00 1.49

0.14 0.09

273.00 247.00 Total: 496.52

Add water charges @ 1% on

Add C.P & OH @15% on 501.49 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 57.67 Rs 57.65

Item Code: 9.70.2 P/F Stainless steel butt hinges with stainless steel screws etc. complete : 100 x 58 x 1.90 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 Nos MATERIALS8216 S.S. butt hinges 100x58x1.9 mm 10 No 10.00 8211 Stainless steel screws 40 mm 100 N 80.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter 2nd class Day 0.14 0114 Beldar Day 0.09 Add water charges @ 1% on

Rate

215.00 195.00 1.49 273.00 247.00 Total: 435.52

Add C.P & OH @15% on 439.88 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 50.59 Rs 50.60

Item Code: 9.70.3 P/F Stainless steel butt hinges with stainless steel screws etc. complete : 75 x 47 x 1.80 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 Nos MATERIALS8217 S.S. butt hinges 75x47x1.8 mm 10 No 10.00 8212 Stainless steel screws 30 mm 100 N 60.00 9999 Carriage of materials L.S. 1.82 LABOUR0112 Carpenter 2nd class Day 0.14 0114 Beldar Day 0.09 Add water charges @ 1% on

Rate

145.00 145.00 1.49 273.00 247.00 Total: 295.16

Add C.P & OH @15% on 298.11 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 34.28 Rs 34.30

Page 289 of 2298

Item Code: 9.70.4 P/F Stainless steel butt hinges with stainless steel screws etc. complete : 50 x 37 x 1.50 mm. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 Nos MATERIALS8218 S.S. butt hinges 50x37x1.5 mm 10 No 10.00 8214 Stainless steel screws 20 mm 100 N 40.00 9999 Carriage of materials L.S. 0.91 LABOUR0112 Carpenter 2nd class Day 0.08 Add water charges @ 1% on

Rate

125.00 95.00 1.49 273.00 Total: 186.20

Add C.P & OH @15% on 188.06 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 21.63 Rs 21.65

Item Code: 9.71.1 P/F Stainless steel butt hinges (Heavy weight) with stainless steel screws etc. complete : 125 x 64 x 2.50 mm.

Code

8219 8210 9999 0112 0114

Description Details of cost for 10 Nos MATERIALSS.S. butt hinges 125x64x2.5 mm Stainless steel screws 50 mm Carriage of materials LABOURCarpenter 2nd class Beldar

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day Day

Rate

10.00 80.00 2.73

320.00 240.00 1.49

0.14 0.09

273.00 247.00 Total: 576.52

Add water charges @ 1% on

Add C.P & OH @15% on 582.29 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 66.96 Rs 66.95

Item Code: 9.71.2 P/F Stainless steel butt hinges (Heavy weight) with stainless steel screws etc. complete : 100 x 60 x 2.50 mm.

Code

8220 8211 9999 0112 0114

DSR-12

Description Details of cost for 10 Nos MATERIAL S.S. butt hinges 100x60x2.5 mm Stainless steel screws 40 mm Carriage of materials LABOURCarpenter 2nd class Beldar

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day Day

Rate

10.00 80.00 2.73

230.00 195.00 1.49

0.14 0.09

273.00 247.00 Total:

Page 290 of 2298

Add water charges @ 1% on

450.52

Add C.P & OH @15% on 455.03 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 52.33 Rs 52.35

Item Code: 9.71.3 P/F Stainless steel butt hinges (Heavy weight) with stainless steel screws etc. complete : 75 x 50 x 2.50 mm.

Code

8221 8212 9999 0112 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 Nos MATERIALSS.S. butt hinges 75x50x2.5 mm Stainless steel screws 30 mm Carriage of materials LABOURCarpenter 2nd class Beldar

10 No 100 N L.S. Day Day

Rate

10.00 60.00 1.82

195.00 145.00 1.49

0.14 0.09

273.00 247.00 Total: 345.16

Add water charges @ 1% on

Add C.P & OH @15% on 348.61 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 40.09 Rs 40.10

Item Code: 9.72.1 P/F bright finished brass butt hinges :- 125 x 85 x 5.5 mm (heavy type). Code

0382 0449 9999 0111 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSBrass butt hinges 125x85x5.5 mm Brass screws 50 mm Carriage of material LABOURCarpenter 1 st class Beldar

10 No 100 N L.S. Day Day

Rate

10.00 100.00 3.64

2900.00 200.00 1.49

0.14 0.10

301.00 247.00 Total: 3172.26

Add water charges @ 1% on

Add C.P & OH @15% on 3203.98 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 368.46 Rs 368.45

Item Code: 9.72.2 P/F bright finished brass butt hinges :- 125 x 70 x 4 mm (ordinary type). Code

DSR-12

Description Details of cost for 10 nos. MATERIALS-

Details of Cost for : 10.00 Nos Unit Quantity

Rate

Page 291 of 2298

0378 0449 9999 0111 0114

Brass butt hinges 125x70x4 mm Brass screws 50 mm Carriage of material LABOURCarpenter 1 st class Beldar

10 No 100 N L.S. Day Day

10.00 100.00 3.64

800.00 200.00 1.49

0.14 0.10

301.00 247.00 Total: 1072.26

Add water charges @ 1% on

Add C.P & OH @15% on 1082.98 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 124.54 Rs 124.55

Item Code: 9.72.3 P/F bright finished brass butt hinges :- 100 x 85 x 5.5 mm (heavy type). Code

0383 0450 9999 0111 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MaterialsBrass butt hinges 100x85x5.5 mm Brass screws 40 mm Carriage of material LABOURCarpenter 1 st class Beldar

10 No 100 N L.S. Day Day

Rate

10.00 80.00 2.73

2600.00 160.00 1.49

0.14 0.10

301.00 247.00 Total: 2798.91

Add water charges @ 1% on

Add C.P & OH @15% on 2826.90 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 325.09 Rs 325.10

Item Code: 9.72.4 P/F bright finished brass butt hinges :- 100 x 70 x 4 mm (ordinary type). Code

0379 0450 9999 0111 0114

Description Details of cost for 10 nos. MATERIALSBrass butt hinges 100x70x4 mm Brass screws 40 mm Carriage of material LABOURCarpenter 1 st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day Day

Rate

10.00 80.00 2.73

650.00 160.00 1.49

0.14 0.10

301.00 247.00 Total: 848.91

Add water charges @ 1% on

Add C.P & OH @15% on 857.40 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 98.60 Rs 98.60

Page 292 of 2298

Item Code: 9.72.5 P/F bright finished brass butt hinges :- 75 x 65 x 4 mm (heavy type). Code

0384 0451 9999 0111 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSBrass butt hinges 75x65x4 mm Brass screws 30 mm Carriage of material LABOURCarpenter 1st class Beldar

10 No 100 N L.S. Day Day

Rate

10.00 60.00 2.73

900.00 130.00 1.49

0.14 0.10

301.00 247.00 Total: 1048.91

Add water charges @ 1% on

Add C.P & OH @15% on 1059.40 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 121.83 Rs 121.85

Item Code: 9.72.6 P/F bright finished brass butt hinges :- 75 x 40 x 2.5 mm (ordinary type). Code

0380 0451 9999 0111 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSBrass butt hinges 75x40x2.5 mm Brass screws 30 mm Carriage of material LABOURCarpenter 1st class Beldar

10 No 100 N L.S. Day Day

Rate

10.00 60.00 2.73

400.00 130.00 1.49

0.14 0.10

301.00 247.00 Total: 548.91

Add water charges @ 1% on

Add C.P & OH @15% on 554.40 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 63.76 Rs 63.75

Item Code: 9.72.7 P/F bright finished brass butt hinges :- 50 x 40 x 2.5 mm (ordinary type). Code

0381 0453 9999 0111

Description Details of cost for 10 nos. MATERIALSBrass butt hinges 50x40x2.5 mm Brass screws 20 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day

Rate

10.00 40.00 1.82

175.00 80.00 1.49

0.08

301.00 Total: 233.79

Add water charges @ 1% on

Add C.P & OH @15% on 236.13 Cost for 10.00 Nos

DSR-12

Page 293 of 2298

Rate per Each: Rate as per DSR-12:

Rs 27.16 Rs 27.15

Item Code: 9.73.1 P/F bright finished brass parliamentary hinges :- 150 x 125 x 27 x 5 mm. Code

0385 0450 9999 0111 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSParliamentary hinges l50xl25x27x5 mm Brass screws 40 mm Carriage of materials LABOURCarpenter 1 st class Beldar

10 No 100 N L.S. Day Day

Rate

10.00 80.00 2.73

2600.00 160.00 1.49

0.14 0.14

301.00 247.00 Total: 2808.79

Add water charges @ 1% on

Add C.P & OH @15% on 2836.88 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 326.24 Rs 326.25

Item Code: 9.73.2 P/F bright finished brass parliamentary hinges :- 125 x 125 x 27 x 5 mm. Code

0386 0450 9999 0111 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSParliamentary hinges 125x125x27x5 mm Brass screws 40 mm Carriage of materials LABOURCarpenter 1 st class Beldar

10 No 100 N L.S. Day Day

Rate

10.00 80.00 2.73

2300.00 160.00 1.49

0.14 0.14

301.00 247.00 Total: 2508.79

Add water charges @ 1% on

Add C.P & OH @15% on 2533.88 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 291.40 Rs 291.40

Item Code: 9.73.3 P/F bright finished brass parliamentary hinges :- 100 x 125 x 27 x 5 mm. Code 0387 0450 9999 0111 0114

DSR-12

Description MATERIALSParliamentary hinges 100x125x27x5 mm Brass screws 40 mm Carriage of materials LABOURCarpenter 1 st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day Day

Rate

10.00 80.00 2.73

2000.00 160.00 1.49

0.14 0.14

301.00 247.00

Page 294 of 2298

Add water charges @ 1% on

Total: 2208.79

Add C.P & OH @15% on 2230.88 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 256.55 Rs 256.55

Item Code: 9.73.4 P/F bright finished brass parliamentary hinges :- 75 x 100 x 20 x 3.2 mm. Code

0388 0451 9999 0111 0114

Description Details of cost for 10 nos. MATERIALSParliamentary hinges 75x100x20x3.2 mm Brass screws 30 mm Carriage of materials LABOURCarpenter 1 st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day Day

Rate

10.00 60.00 2.73

1600.00 130.00 1.49

0.14 0.14

301.00 247.00 Total: 1758.79

Add water charges @ 1% on

Add C.P & OH @15% on 1776.38 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 204.28 Rs 204.30

Item Code: 9.74.1 P/F bright finished brass tower bolts :- 250 x 10 mm. Code 0400 0451 9999 0111

Description MATERIALSBrass barrel bolts 250x 10 mm Brass screws 30 mm Carriage of materials LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S. Day

Rate

10.00 100.00 4.55

225.00 130.00 1.49

0.10

301.00 Total: 2416.88

Add water charges @ 1% on

Add C.P & OH @15% on 2441.05 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 280.72 Rs 280.70

Item Code: 9.74.2 P/F bright finished brass tower bolts :- 200 x 10 mm. Code 0401 0451 9999

DSR-12

Description MATERIALSBrass barrel bolts 200x10 mm Brass screws 30 mm Carriage of materials

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S.

10.00 80.00 2.73

Rate 175.00 130.00 1.49

Page 295 of 2298

0111

LABOURCarpenter 1 st class

Day

0.10

Add water charges @ 1% on

301.00 Total: 1888.17

Add C.P & OH @15% on 1907.05 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 219.31 Rs 219.30

Item Code: 9.74.3 P/F bright finished brass tower bolts :- 150 x 10 mm. Code 0402 0451 9999 0111

Description MATERIALSBrass barrel bolts 150x10 mm Brass screws 30 mm Carriage of materials LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S. Day

Rate

10.00 80.00 2.73

140.00 130.00 1.49

0.10

301.00 Total: 1538.17

Add water charges @ 1% on

Add C.P & OH @15% on 1553.55 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 178.66 Rs 178.65

Item Code: 9.74.4 P/F bright finished brass tower bolts :- 100 x 10 mm. Code

0403 0451 9999 0111

Description Details of cost for 10 nos. MATERIALSBrass barrel bolts 100x10 mm Brass screws 30 mm Carriage of materials LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 60.00 2.73

90.00 130.00 1.49

0.10

301.00 Total: 1012.17

Add water charges @ 1% on

Add C.P & OH @15% on 1022.29 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 117.56 Rs 117.55

Item Code: 9.75.1 P/F bright finished brass door latch :- 300 x 16 x 5 mm. Code

0411

DSR-12

Description Details of cost for 10 nos. MATERIALSBrass door latch 300x16x5 mm

Details of Cost for : 10.00 Nos Unit Quantity

each

10.00

Rate

160.00

Page 296 of 2298

0452 9999 0111

Brass screws 25 mm Carriage of materials LABOURCarpenter 1 st class

100 N L.S. Day

90.00 3.64

95.00 1.49

0.12

301.00 Total: 1727.04

Add water charges @ 1% on

Add C.P & OH @15% on 1744.31 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 200.60 Rs 200.60

Item Code: 9.75.2 P/F bright finished brass door latch :- 250 x 16 x 5 mm. Code 0412 0452 9999 0111

Description MATERIALSBrass door latch 250x16x5 mm Brass screws 25 mm Carriage of materials LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S. Day

Rate

10.00 90.00 3.64

150.00 95.00 1.49

0.12

301.00 Total: 1627.04

Add water charges @ 1% on

Add C.P & OH @15% on 1643.31 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 188.98 Rs 189.00

Item Code: 9.76 P/F bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles._x000D_ Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 0413 100 mm mortice latch & lock with 6 levers each 1.00 350.00 LABOUR : 0111 9999

Carpenter 1st class Sundries (screws, carriage etc.)

Day

0.17

301.00

L.S.

3.64

1.49 Total: 406.59

Add water charges @ 1% on

Add C.P & OH @15% on 410.66 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 472.26 Rs 472.25

Item Code: 9.77 P/F bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles. Details of Cost for : 1.00 No. Code Description Unit Quantity

DSR-12

Rate

Page 297 of 2298

0414 0111 9999

MATERIALS100 mm mortice latch LABOURCarpenter 1st class Sundries (screws, carriage etc.)

each

1.00

300.00

Day L.S.

0.17 3.64

301.00 1.49 Total: 356.59

Add water charges @ 1% on

Add C.P & OH @15% on 360.16 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 414.18 Rs 414.20

Item Code: 9.78 P/F bright finished brass night latch. Code 0438 0111 9999

Description MATERIALSBrass night latch LABOURCarpenter 1st class Sundries (screws, carriage etc.)

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

450.00

Day L.S.

0.17 3.64

301.00 1.49 Total: 506.59

Add water charges @ 1% on

Add C.P & OH @15% on 511.66 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 588.41 Rs 588.40

Item Code: 9.79.1 P/F special quality bright finished brass cupboard or ward robe locks with four levers :- 40 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS2451 40 mm lock each 1.00 LABOUR0111 Carpenter 1 st class Day 0.17 9999 Sundries & screws L.S. 3.64 Add water charges @ 1% on

Rate 65.00 301.00 1.49 Total: 121.59

Add C.P & OH @15% on 122.81 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 141.23 Rs 141.25

Item Code: 9.79.2 P/F special quality bright finished brass cupboard or ward robe locks with four levers :- 50 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for 1 No. MATERIALS2452 50 mm lock each 1.00

DSR-12

Rate

70.00

Page 298 of 2298

0111 9999

LABOURCarpenter 1st class Sundries & screws

Day L.S.

0.17 3.64

Add water charges @ 1% on

301.00 1.49 Total: 126.59

Add C.P & OH @15% on 127.86 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 147.04 Rs 147.05

Item Code: 9.79.3 P/F special quality bright finished brass cupboard or ward robe locks with four levers :- 65 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS2453 Brass cupboard lock 6 levers (best make of approved quality) each 1.00 65 mm size LABOUR0111 Carpenter 1st class Day 0.17 9999 Sundries & screws L.S. 3.64 Add water charges @ 1% on

Rate 75.00

301.00 1.49 Total: 131.59

Add C.P & OH @15% on 132.91 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 152.85 Rs 152.85

Item Code: 9.79.4 P/F special quality bright finished brass cupboard or ward robe locks with four levers :- 75 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS2454 75 mm lock each 1.00 LABOUR0111 Carpenter 1st class Day 0.17 9999 Sundries & screws L.S. 3.64 Add water charges @ 1% on

Rate 95.00 301.00 1.49 Total: 151.59

Add C.P & OH @15% on 153.11 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 176.08 Rs 176.10

Item Code: 9.80 P/F 50 mm bright finished brass cup board or wardrobe knob. Code 0447 9999

DSR-12

Description MATERIALSCupboard knob Carriage of material LABOUR-

Details of Cost for : 10.00 Nos Unit Quantity each L.S.

10.00 2.73

Rate 30.00 1.49

Page 299 of 2298

0111

Carpenter 1 st class

Day

0.14

Add water charges @ 1% on

301.00 Total: 346.21

Add C.P & OH @15% on 349.67 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 40.21 Rs 40.20

Item Code: 9.81.1 P/F bright finished brass handles :- 125 mm. Code 0408 0452 9999 0111

Description MATERIALSBright finished brass handles 125 mm Brass screws 25 mm Carriage of material LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S. Day

Rate

10.00 40.00 2.73

140.00 95.00 1.49

0.06

301.00 Total: 1460.13

Add water charges @ 1% on

Add C.P & OH @15% on 1474.73 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 169.59 Rs 169.60

Item Code: 9.81.2 P/F bright finished brass handles :- 100 mm. Code 0409 0452 9999 0111

Description MATERIALSBright finished brass handles 100 mm Brass screws 25 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S. Day

Rate

10.00 40.00 0.91

125.00 95.00 1.49

0.06

301.00 Total: 1307.42

Add water charges @ 1% on

Add C.P & OH @15% on 1320.49 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 151.86 Rs 151.85

Item Code: 9.81.3 P/F bright finished brass handles :- 75 mm.

DSR-12

Code

Description

0410 0452 9999

MATERIALSBright finished brass handles 75 mm Brass screws 25 mm Carriage of material LABOUR-

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S.

10.00 40.00 0.91

Rate 95.00 95.00 1.49

Page 300 of 2298

0111

Carpenter 1 st class

Day

0.06

Add water charges @ 1% on

301.00 Total: 1007.42

Add C.P & OH @15% on 1017.49 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 117.01 Rs 117.00

Item Code: 9.82 P/F bright finished brass hanging type floor door stopper. Code

2455 0452 9999 0111

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 hanging floor door stopper MATERIALSBright finished brass floor door stopper Brass screws 25 mm Carriage of material LABOURCarpenter 1st class

each 100 N L.S. Day

Rate

10.00 20.00 2.73

60.00 95.00 1.49

0.03

301.00 Total: 632.10

Add water charges @ 1% on

Add C.P & OH @15% on 638.42 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 73.42 Rs 73.40

Item Code: 9.83 P/F IS : 3564 marked Aluminium die cast tubular type universal hydraulic door closer complete. _x000D_ Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate MATERIALS: 2456 Hydraulic door closer - Aluminium die cast body - Universal each 10.00 535.00 type 0451 Brass screws 30mm 100 N 60.00 130.00 9999 Carriage of materials L.S. 3.64 1.49 LABOUR : 0112 Carpenter II class Day 1.00 273.00 Total: Add water charges @ 1% on 5706.42 Add C.P & OH @15% on 5763.48 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 662.80 Rs 662.80

Item Code: 9.84 P/F IS : 3564 Aluminium extruded hydraulic door closer double speed. Code 7060 0451

DSR-12

Description MATERIALSHydraulic door closer Brass screws 30 mm

Details of Cost for : 10.00 Nos Unit Quantity each 100 N

10.00 60.00

Rate 810.00 130.00

Page 301 of 2298

9999 0112

Carriage of material LABOURCarpenter 2nd class

L.S.

1.00

1.49

Day

1.00

273.00 Total: 8452.49

Add water charges @ 1% on

Add C.P & OH @15% on 8537.01 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 981.76 Rs 981.75

Item Code: 9.85 P/F bright finished brass casement window fastener. Code 0423 0452 9999 0111

Description MATERIALSBrass casement window fastner Brass screws 25 mm Carriage of material LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity Each 100 N L.S. Day

Rate

10.00 40.00 0.91

45.00 95.00 1.49

0.10

301.00 Total: 519.46

Add water charges @ 1% on

Add C.P & OH @15% on 524.65 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 60.34 Rs 60.35

Item Code: 9.86.1 P/F bright finished brass casement stays :- 300 mm weighing not less than 330 gms. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS0424 Brass casement stayes 300 mm each 10.00 0451 Brass screws 30 mm 100 N 40.00 9999 Carriage of material L.S. 0.91 LABOUR0111 Carpenter 1 st class Day 0.10 Add water charges @ 1% on

Rate 120.00 130.00 1.49 301.00 Total: 1283.46

Add C.P & OH @15% on 1296.29 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 149.07 Rs 149.05

Item Code: 9.86.2 P/F bright finished brass casement stays :- 250 mm weighing not less than 280 gms. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. Materials0425 Brass casement stayes 250 mm each 10.00

DSR-12

Rate

100.00

Page 302 of 2298

0452 9999 0111

Brass screws 25 mm Carriage of material LabourCarpenter 1 st class

100 N L.S. Day

40.00 0.91

95.00 1.49

0.10

301.00 Total: 1069.46

Add water charges @ 1% on

Add C.P & OH @15% on 1080.15 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 124.22 Rs 124.20

Item Code: 9.86.3 P/F bright finished brass casement stays :- 200 mm weighing not less than 240 gms. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS0426 Brass casement stayes 200 mm each 10.00 0452 Brass screws 25 mm 100 N 40.00 9999 Carriage of material L.S. 0.91 LABOUR0111 Carpenter 1 st class Day 0.10 Add water charges @ 1% on

Rate 90.00 95.00 1.49 301.00 Total: 969.46

Add C.P & OH @15% on 979.15 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 112.60 Rs 112.60

Item Code: 9.87.1 P/F bright finished brass hasp and staple :- 150 mm. Code 0431 0452 9999 0111

Description MATERIALSBrass Safety hasps & staples 150 mm Brass screws 25 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day

Rate

10.00 80.00 1.82

700.00 95.00 1.49

0.08

301.00 Total: 802.79

Add water charges @ 1% on

Add C.P & OH @15% on 810.82 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 93.24 Rs 93.25

Item Code: 9.87.2 P/F bright finished brass hasp and staple :- 115 mm.

DSR-12

Code

Description

0432

MATERIALSBrass Safety hasps & staples 115 mm

Details of Cost for : 10.00 Nos Unit Quantity 10 No

10.00

Rate 600.00

Page 303 of 2298

0453 9999 0111

Brass screws 20 mm Carriage of material LABOURCarpenter 1st class

100 N L.S. Day

70.00 1.82

80.00 1.49

0.08

301.00 Total: 682.79

Add water charges @ 1% on

Add C.P & OH @15% on 689.62 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 79.31 Rs 79.30

Item Code: 9.87.3 P/F bright finished brass hasp and staple :- 90 mm. Code 0433 0453 9999 0111

Description MATERIALSBrass Safety hasps & staples 90 mm Brass screws 20 mm Carriage of material LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day

Rate

10.00 70.00 1.82

500.00 80.00 1.49

0.08

301.00 Total: 582.79

Add water charges @ 1% on

Add C.P & OH @15% on 588.62 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 67.69 Rs 67.70

Item Code: 9.88 P/F chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of handles with n/ascrews. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS0558 100 mm mortice latch & lock with 6 levers each 1.00 500.00 LABOUR0111 Carpenter 1 st class Day 0.17 301.00 9999 Sundries (screws, carriage etc.) L.S. 3.64 1.49 Total: Add water charges @ 1% on 556.59 Add C.P & OH @15% on 562.16 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 646.48 Rs 646.50

Item Code: 9.89 P/F chromium plated brass night latch. Code 0583

DSR-12

Description MATERIALSBrass night latch LABOUR-

Details of Cost for : 1.00 No. Unit Quantity each

1.00

Rate 500.00

Page 304 of 2298

0111 9999

Carpenter 1st class Sundries (screws, carriage etc.)

Day L.S.

0.17 3.64

Add water charges @ 1% on

301.00 1.49 Total: 556.59

Add C.P & OH @15% on 562.16 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 646.48 Rs 646.50

Item Code: 9.90.1 P/F special quality chromium plated brass cupboard locks with six levers :- Size 40 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS2468 40 mm lock each 1.00 LABOUR0111 Carpenter 1st class Day 0.17 9999 Sundries & screws L.S. 3.64 Add water charges @ 1% on

Rate 62.00 301.00 1.49 Total: 118.59

Add C.P & OH @15% on 119.78 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 137.75 Rs 137.75

Item Code: 9.90.2 P/F special quality chromium plated brass cupboard locks with six levers :- Size 50 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS2469 50 mm lock each 1.00 LABOUR0111 Carpenter 1st class Day 0.17 9999 Sundries & screws L.S. 3.64 Add water charges @ 1% on

Rate 70.00 301.00 1.49 Total: 126.59

Add C.P & OH @15% on 127.86 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 147.04 Rs 147.05

Item Code: 9.90.3 P/F special quality chromium plated brass cupboard locks with six levers :- Size 65 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS2470 65 mm lock each 1.00 LABOUR0111 Carpenter 1 st class Day 0.17 9999 Sundries & screws L.S. 3.64

DSR-12

Rate 82.00 301.00 1.49 Total:

Page 305 of 2298

Add water charges @ 1% on

138.59

Add C.P & OH @15% on 139.98 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 160.98 Rs 161.00

Item Code: 9.90.4 P/F special quality chromium plated brass cupboard locks with six levers :- Size 75 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one Materials2471 75 mm lock each 1.00 Labour0111 Carpenter 1st class Day 0.17 9999 Sundries & screws L.S. 3.64 Add water charges @ 1% on

Rate

103.00 301.00 1.49 Total: 159.59

Add C.P & OH @15% on 161.19 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 185.37 Rs 185.35

Item Code: 9.91 P/F chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete :Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS0584 Cupboard knob each 10.00 9999 Carriage of material L.S. 2.73 LABOUR0111 Carpenter 1 st class Day 0.14 Add water charges @ 1% on

Rate 45.00 1.49 301.00 Total: 496.21

Add C.P & OH @15% on 501.17 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 57.64 Rs 57.65

Item Code: 9.92.1 P/F chromium plated brass handles :- 125 mm. Code 0555 0452 9999 0111

Description MATERIALSChromium plated brass handles 125 mm Brass screws 25 mm Carriage of material LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity Each 100 N L.S. Day

10.00 40.00 2.73

160.00 95.00 1.49

0.06

301.00 Total: 1660.13

Add water charges @ 1% on

DSR-12

Rate

Page 306 of 2298

Add C.P & OH @15% on 1676.73 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 192.82 Rs 192.80

Item Code: 9.92.2 P/F chromium plated brass handles :- 100 mm. Code

0556 0452 9999 0111

Description Details of cost for 10 nos. MaterialsChromium plated brass handles 100 mm Brass screws 25 mm Carriage of material LabourCarpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity

Each 100 N L.S. Day

Rate

10.00 40.00 0.91

140.00 95.00 1.49

0.06

301.00 Total: 1457.42

Add water charges @ 1% on

Add C.P & OH @15% on 1471.99 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 169.28 Rs 169.30

Item Code: 9.92.3 P/F chromium plated brass handles :- 75 mm. Code 0557 0452 9999 0111

Description MATERIALSChromium plated brass handles 75 mm Brass screws 25 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity Each 100 N L.S. Day

Rate

10.00 40.00 0.91

120.00 95.00 1.49

0.06

301.00 Total: 1257.42

Add water charges @ 1% on

Add C.P & OH @15% on 1269.99 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 146.05 Rs 146.05

Item Code: 9.93 P/F chromium plated brass casement window fastener. Code 0568 0588 9999 0111

DSR-12

Description MATERIALSC.P. brass window fastner C.P. brass screws 25 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S. Day

Rate

10.00 40.00 0.91

90.00 115.00 1.49

0.10

301.00 Total:

Page 307 of 2298

Add water charges @ 1% on

977.46

Add C.P & OH @15% on 987.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 113.53 Rs 113.55

Item Code: 9.94.1 P/F chromium plated brass casement stays :- 300 mm weighing not less than 330 gms. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIAL S0569 C.P. brass casement stays 300 mm each 10.00 0588 C.P. brass screws 25 mm 100 N 40.00 9999 Carriage of material L.S. 0.91 LABOUR0111 Carpenter 1 st class Day 0.10 Add water charges @ 1% on

Rate 140.00 115.00 1.49 301.00 Total: 1477.46

Add C.P & OH @15% on 1492.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 171.61 Rs 171.60

Item Code: 9.94.2 P/F chromium plated brass casement stays :- 250 mm weighing not less than 280 gms. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS0570 C.P. brass casement stays 250 mm each 10.00 0588 C.P. brass screws 25 mm 100 N 40.00 9999 Carriage of material L.S. 0.91 LABOUR0111 Carpenter 1st class Day 0.10 Add water charges @ 1% on

Rate 120.00 115.00 1.49 301.00 Total: 1277.46

Add C.P & OH @15% on 1290.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 148.38 Rs 148.40

Item Code: 9.94.3 P/F chromium plated brass casement stays :- 200 mm weighing not less than 240 gms. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. Materials0571 C.P. brass casement stays 200 mm each 10.00 0588 C.P. brass screws 25 mm 100 N 40.00 9999 Carriage of material L.S. 0.91 Labour0111 Carpenter 1st class Day 0.10

DSR-12

Rate

100.00 115.00 1.49 301.00

Page 308 of 2298

Add water charges @ 1% on

Total: 1077.46

Add C.P & OH @15% on 1088.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 125.15 Rs 125.15

Item Code: 9.95.1 P/F aluminium butt hinges :- 125 x 75 x 4 mm. Code 0687 0585 9999 0111 0114

Description MATERIALSAluminium butt hinges 125x75x4.00 mm C.P.brass screws 50 mm Carriage of materials LABOURCarpenter 1st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day Day

Rate

10.00 100.00 3.64

550.00 230.00 1.49

0.14 0.09

301.00 247.00 Total: 849.79

Add water charges @ 1% on

Add C.P & OH @15% on 858.29 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 98.70 Rs 98.70

Item Code: 9.95.2 P/F aluminium butt hinges :- 125 x 63 x 4 mm. Code 0688 0585 9999 0111 0114

Description MATERIALSAluminium butt hinges 125x63x4.00 mm C.P.brass screws 50 mm Carriage of materials LABOURCarpenter 1 st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day Day

Rate

10.00 100.00 3.64

510.00 230.00 1.49

0.14 0.09

301.00 247.00 Total: 809.79

Add water charges @ 1% on

Add C.P & OH @15% on 817.89 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 94.06 Rs 94.05

Item Code: 9.95.3 P/F aluminium butt hinges :- 100 x 75 x 4 mm. Code 0689 0586 9999

DSR-12

Description MATERIALSAluminium butt hinges 100x75x4.00 mm C.P.brass screws 40 mm Carriage of materials

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S.

10.00 80.00 2.73

Rate 500.00 190.00 1.49

Page 309 of 2298

0111 0114

LABOURCarpenter 1 st class Beldar

Day Day

0.14 0.09

Add water charges @ 1% on

301.00 247.00 Total: 720.44

Add C.P & OH @15% on 727.64 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 83.68 Rs 83.70

Item Code: 9.95.4 P/F aluminium butt hinges :- 100 x 63 x 4 mm. Code 0691 0586 9999 0111 0114

Description MATERIALSAluminium butt hinges 100x63x4.00 mm C.P.brass screws 40 mm Carriage of materials LABOURCarpenter 1st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day Day

Rate

10.00 80.00 2.73

490.00 190.00 1.49

0.14 0.09

301.00 247.00 Total: 710.44

Add water charges @ 1% on

Add C.P & OH @15% on 717.54 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 82.52 Rs 82.50

Item Code: 9.95.5 P/F aluminium butt hinges :- 100 x 63 x 3.2 mm. Code 0690 0586 9999 0111 0114

Description MATERIALSAluminium butt hingesl00x63x3.20 mm C.P.brass screws 40 mm Carriage of materials LABOURCarpenter 1 st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day Day

Rate

10.00 80.00 2.73

480.00 190.00 1.49

0.14 0.09

301.00 247.00 Total: 700.44

Add water charges @ 1% on

Add C.P & OH @15% on 707.44 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 81.36 Rs 81.35

Item Code: 9.95.6 P/F aluminium butt hinges :- 75 x 63 x 4 mm. Code

Description

Details of Cost for : 10.00 Nos Unit Quantity

Rate

MATERIALS-

DSR-12

Page 310 of 2298

0692 0587 9999 0111 0114

Aluminium butt hinges 75x63x4.00 mm C.P.brass screws 30 mm Carriage of materials LABOURCarpenter 1st class Beldar

10 No 100 N L.S. Day Day

10.00 60.00 1.82

475.00 150.00 1.49

0.14 0.09

301.00 247.00 Total: 632.08

Add water charges @ 1% on

Add C.P & OH @15% on 638.40 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 73.42 Rs 73.40

Item Code: 9.95.7 P/F aluminium butt hinges :- 75 x 63 x 3.2 mm. Code 0693 0587 9999 0111 0114

Description MATERIALSAluminium butt hinges 75x63x3.20 mm C.P.brass screws 30 mm Carriage of materials LABOURCarpenter 1st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day Day

Rate

10.00 60.00 1.82

450.00 150.00 1.49

0.14 0.09

301.00 247.00 Total: 607.08

Add water charges @ 1% on

Add C.P & OH @15% on 613.15 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 70.51 Rs 70.50

Item Code: 9.95.8 P/F aluminium butt hinges :- 75 x 45 x 3.2 mm. Code 0694 0587 9999 0111 0114

Description MATERIALSAluminium butt hinges 75x45x3.20 mm C.P.brass screws 30 mm Carriage of materials LABOURCarpenter 1 st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day Day

Rate

10.00 60.00 1.82

390.00 150.00 1.49

0.14 0.09

301.00 247.00 Total: 547.08

Add water charges @ 1% on

Add C.P & OH @15% on 552.55 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 63.54 Rs 63.55

Item Code: 9.96.1 P/F anodised aluminium sliding door bolts :_x000D_

DSR-12

Page 311 of 2298

Code

Description

0696 0588 9999

MATERIALS: Anodised Aluminium sliding door bolt 300x16 mm Chromium plated Brass screws 25 mm Carriage of materials

0111

LABOUR : Carpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity each 100 N

Rate

10.00 40.00

155.00 115.00

L.S.

5.46

1.49

Day

0.50

301.00 Total: 1754.64

Add water charges @ 1% on

Add C.P & OH @15% on 1772.19 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 203.80 Rs 203.80

Item Code: 9.96.2 P/F aluminium sliding door bolts with nuts and screws etc. complete : 250x16 mm Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS0697 Aluminium sliding bolt 250x16 mm each 10.00 0588 C.P. brass screws 25 mm 100 N 40.00 9999 Carriage of materials L.S. 5.46 LABOUR0111 Carpenter 1st class Day 0.50 Add water charges @ 1% on

Rate 125.00 115.00 1.49 301.00 Total: 1454.64

Add C.P & OH @15% on 1469.19 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 168.96 Rs 168.95

Item Code: 9.97.1 P/F aluminium tower bolt anodised - 300x10mm_x000D_ Code 0698 0587 9999 0111

Description MATERIALSAluminium tower bolt (barrel type)300x10 mm C.P. brass screws 30 mm Carriage of materials LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

Rate

10 No

10.00

700.00

100 N L.S.

80.00 4.42

150.00 1.49

Day

0.125

301.00 Total: 864.22

Add water charges @ 1% on

Add C.P & OH @15% on 872.86 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 100.38 Rs 100.40

Page 312 of 2298

Item Code: 9.97.2 P/F anodised aluminium tower bolts : 250 x 10 mm . Code 0699 0587 9999 0111

Details of Cost for : 10.00 Nos Unit Quantity

Description MATERIALSAluminium tower bolt (barrel type) 250x10 mm C.P. brass screws 30 mm Carriage of materials LABOURCarpenter 1st class

Rate

10 No

10.00

580.00

100 N L.S.

80.00 4.42

150.00 1.49

Day

0.125

301.00 Total: 744.22

Add water charges @ 1% on

Add C.P & OH @15% on 751.66 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 86.44 Rs 86.45

Item Code: 9.97.3 P/F anodised aluminium tower bolts : 200 x 10 mm ._x000D_ Code

Details of Cost for : 10.00 Nos Unit Quantity

Description

0700

MATERIALS: Anodised Aluminium tower bolt (barrel type)200x10 mm

0587 9999

Chromium plated Brass screws 30 mm Carriage of materials

Rate

10 No

10.00

450.00

100 N

80.00

150.00

L.S.

2.73

1.49

Day

0.125

301.00 Total: 611.70

LABOUR : 0111

Carpenter 1st class

Add water charges @ 1% on

Add C.P & OH @15% on 617.82 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 71.05 Rs 71.05

Item Code: 9.97.4 P/F anodised aluminium tower bolts : 150 x 10 mm . Code 0701 0587 9999 0111

Description MATERIALSAluminium tower bolt barrel type) 150x10 mm C.P. brass screws 30 mm Carriage of materials LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

Rate

10 No

10.00

360.00

100 N L.S.

80.00 2.73

150.00 1.49

0.08

301.00 Total: 508.15

Day

Add water charges @ 1% on

Add C.P & OH @15% on 513.23 Cost for 10.00 Nos

DSR-12

Page 313 of 2298

Rate per Each: Rate as per DSR-12:

Rs 59.02 Rs 59.00

Item Code: 9.97.5 P/F anodised aluminium tower bolts : 100 x 10 mm ._x000D_ Code

Details of Cost for : 10.00 Nos Unit Quantity

Description

0702

MATERIALS: Anodised Aluminium tower bolt (barrel type)100x10 mm

0587 9999

Chromium plated Brass screws 30 mm Carriage of materials

Rate

10 No

10.00

280.00

100 N

60.00

150.00

L.S.

2.73

1.49

Day

0.08

301.00 Total: 398.15

LABOUR : 0111

Carpenter 1st class

Add water charges @ 1% on

Add C.P & OH @15% on 402.13 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 46.25 Rs 46.25

Item Code: 9.98 Code 2464 9999 0112

Description

Details of Cost for : 10.00 Nos Unit Quantity

MATERIALSaluminum Pull bolt lock with necessary screws, bolts, each eachnuts and washers complete Carriage of materials L.S. LABOURCarpenter 2nd class Day

Rate

10.00

46.00

6.37

1.49

0.25

273.00 Total: 537.74

Add water charges @ 1% on

Add C.P & OH @15% on 543.12 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 62.46 Rs 62.45

Item Code: 9.99 P/F 50 cm long aluminium kicking plate 100 x 3.15 mm . Code 0706 0588 9999 0111 0114

Description MATERIALS Kicking plate 50 cm long - 100x3.15 mm C.P. brass screws 25 mm Carriage of materials LABOURCarpenter 1 st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity each 100 N L.S. Day Day

10.00 40.00 5.46

125.00 115.00 1.49

0.07 0.05

301.00 247.00 Total: 1337.56

Add water charges @ 1% on

DSR-12

Rate

Page 314 of 2298

Add C.P & OH @15% on 1350.94 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 155.36 Rs 155.35

Item Code: 9.100.1 P/F anosied aluminium handles: 125 mm . Code 0703

Details of Cost for : 10.00 Nos Description Unit Quantity Anodised Aluminium handles 125 mm with plate 175 x 32 mm 10 No 10.00

0588 9999

Chromium plated Brass screws 25 mm Carriage of materials

100 N

Rate 470.00

40.00

115.00

L.S.

2.73

1.49

Day

0.06

301.00 Total: 538.13

LABOUR : 0111

Carpenter 1st class

Add water charges @ 1% on

Add C.P & OH @15% on 543.51 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 62.50 Rs 62.50

Item Code: 9.100.2 P/F anosied aluminium handles: 100 mm . Code 0704 0588 9999 0111

Description MATERIALSAluminium handles 100 mm C.P. brass screws 25 mm Carriage of materials LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day

Rate

10.00 40.00 1.82

360.00 115.00 1.49

0.06

301.00 Total: 426.77

Add water charges @ 1% on

Add C.P & OH @15% on 431.04 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 49.57 Rs 49.55

Item Code: 9.100.3 P/F anosied aluminium handles: 75 mm . Code 0705 0589 9999 0111

DSR-12

Description MATERIALSAluminium handles 75 mm C.P. brass screws 25 mm Carriage of materials LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity 10 No 100 N L.S. Day

Rate

10.00 40.00 1.82

300.00 100.00 1.49

0.06

301.00

Page 315 of 2298

Add water charges @ 1% on

Total: 360.77

Add C.P & OH @15% on 364.38 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 41.90 Rs 41.90

Item Code: 9.101.1 P/F aluminium hanging floor door stopper :- Single rubber stopper ._x000D_ Details of Cost for : 10.00 Nos Code Description Unit Quantity 2459 Anodised Aluminium hanging type door stopper each 10.00 0588 Chromium plated Brass screws 25 mm 100 N 20.00 9999 Carriage of materials L.S. 2.73 0111 Carpenter 1st class Day 0.03 Add water charges @ 1% on

Rate 21.00 115.00 1.49 301.00 Total: 246.10

Add C.P & OH @15% on 248.56 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 28.58 Rs 28.60

Item Code: 9.101.2 P/F aluminium hanging floor door stopper - Twin rubber stopper Code 7059 0588 9999 0111

Description MATERIALSAluminium hanging floor door stopper with twin rubber stopper C.P. brass screws 25 mm Carriage of materials LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

Rate

each

10.00

58.00

100 N L.S.

20.00 2.73

115.00 1.49

0.03

301.00 Total: 616.10

Day

Add water charges @ 1% on

Add C.P & OH @15% on 622.26 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 71.56 Rs 71.55

Item Code: 9.102 P/F aluminium casement stays anodised (anodic coating not less than grade AC 10 as per IS : 1868). Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS2465 Aluminium casement stays each 10.00 0588 C.P. brass screws 25 mm 100 N 40.00 9999 Carriage of materials L.S. 0.91 LABOUR0111 Carpenter 1 st class Day 0.10

DSR-12

Rate

46.00 115.00 1.49 301.00

Page 316 of 2298

Add water charges @ 1% on

Total: 537.46

Add C.P & OH @15% on 542.83 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 62.43 Rs 62.40

Item Code: 9.103 P/F bright finished brass 100mm mortice latch and lock with six levers (Best make of approved quality). Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for 1 lock MATERIALS7001 100 mm mortice latch and lock (without handles) each 1.00 7003 Pair of aluminium handles each 1.00 LABOUR0111 Carpenter 1 st class Day 0.17 9999 Sundries including carriage of materials L.S. 4.55 Add water charges @ 1% on

Rate

250.00 300.00 301.00 1.49 Total: 607.95

Add C.P & OH @15% on 614.03 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 706.13 Rs 706.15

Item Code: 9.104 P/F aluminium tee chanals (heavy duty) with rollers, stop end in pelmets as curtain rod. Details of Cost for : 2.00 m Code Description Unit Quantity MATERIALS7056 Aluminium channel (heavy duty) with and stop end as curtain metre 2.00 rod 9999 Labour L.S. 2.73 9999 Sundries L.S. 1.43 Add water charges @ 1% on

Rate 45.00 1.49 1.49 Total: 96.20

Add C.P & OH @15% on 97.16 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 55.87 Rs 55.85

Item Code: 9.105.1 P/F partition upto ceiling height consisting of G.I. frame and required board: 67 mm overall thickness partition with 8.5 mm thick glass reinforced Gypsum(GRG) board. Details of Cost for : 21.90 Sqm Code Description Unit Quantity Rate Materials for 6.00x3.65 = 21.9 sqm. (Partition Panel) 7366 (i)Glass reinforced Gyp sum ( GRG) board 8.5 mm thick sqm 43.80 230.00 7367 (ii) 50mm floor and ceiling channel 2x6.00 =12m m 12.00 60.00 7369 (iii) 48mm stud-72x34x36x0.5mm metre 40.15 72.00 (6.00/0.61)+1 = 11x3.65 = 40.15m

DSR-12

Page 317 of 2298

7020

7388

7048 0869 0763 7018 7021 1022 1211 9999 9999 0111 0112 0131 0114

(iv) Screw 20mm long (drive all scews) 100 N [(3.65/0.30)+1]x11x2 = 308 [(6.00/0.30)+1]x2x2=84 = 392 Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt [(6.00/0.61)+1]x2=22 each (vi) Rawl plug [(3.65/0.45)+1]x2= 18 each (vii) Plaster of paris, (88/100)x21.9 = 19.27 kilog (viii) Glue (22/100)x21.90=4.82 kilog (ix) Paper tape (120m roll) roll (300/100)x21.90/120 = 0.584 Nos. (x) Primer (36/100)21.90 = 7.88 litre litre (xi) Galvanised steel bolts & nuts 6mm dia. 10 No 25mm Long 11x2x2=44 (xii) G.I. Plain washer for seam bolts 100 N Sundries carriage L.S. Sundries scaffolding L.S. Labour for 21.90 sqm. Carpernter 1st class 0.3x21.90 Day Carpenter 2nd class 0.13x21.90 Day Painter 0.05x21.90 Day Beldar 0.35x21.90 Day

392.00

56.00

22.00 18.00 19.27 4.82 0.584

48.00 10.00 4.00 65.00 140.00

7.88 44.00

85.00 20.00

44.00 52.00 130.00

32.00 1.49 1.49

6.57 2.847 1.095 7.665

301.00 273.00 273.00 247.00 Total: 21602.52

Add water charges @ 1% on

Add C.P & OH @15% on 21818.55 Cost for 21.90 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1145.72 Rs 1145.70

Item Code: 9.105.2 P/F partition upto ceiling height consisting of G.I. frame and required board: 75 mm overall thickness partition with 12.5 mm plain Gypsum board. Details of Cost for : 21.90 Sqm Code Description Unit Quantity Rate Materials for 6.00x3.65 = 21.9 sqm. (Partition Panel) 8717 (i) 12.5mm thick Plain sqm 43.80 160.00 Gypsum board -2x6.00x3.65=43.80sqm. 7367 (ii) 50mm floor and ceiling channel 2x6.00 = 12m m 12.00 60.00 7369 (iii) 48mm stud-72x34x36x0.5mm metre 40.15 72.00 (6.00/0.61)+1 = 11x3.65 = 40.15m 7020 (iv) Screw 20mm long (drive all scews) 100 N 392.00 56.00 [(3.65/0.30)+1]x11x2 = 308 [(6.00/0.30)+1]x2x2=84 = 392 7388 Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt [(6.00/0.61)+1]x2=22 each 22.00 48.00 7048 (vi) Rawl plug [(3.65/0.45)+ 1]x2= 18 each 18.00 10.00 0869 (vii) Plaster of paris, (88/100)x21.9 = 19.27 kilog 19.27 4.00 0763 (viii) Glue (22/100)x21.90=4.82 kilog 4.82 65.00 7018 (ix) Paper tape (120m roll) roll 0.584 140.00 (300/100)x21.90/120 = 0.584 Nos. 7021 (x) Primer (36/100)21.90 = 7.88 litre litre 7.88 85.00 1022 (xi) Galvanised steel bolts & nuts 6mm dia. 10 No 44.00 20.00 25mm Long 11x2x2=44 1211 (xii) G.I. Plain washer for seam bolts 100 N 44.00 32.00 9999 Sundries carriage L.S. 52.00 1.49 9999 Sundries scaffolding L.S. 130.00 1.49

DSR-12

Page 318 of 2298

0111 0112 0131 0114

Labour for 21.90 sqm. Carpernter 1st class 0.3x21.90 Carpenter Ilnd class 0.13x21.90 Painter 0.05x21.90 Beldar 0.35x21.90

Day Day Day Day

6.57 2.847 1.095 7.665

Add water charges @ 1% on

301.00 273.00 273.00 247.00 Total: 18536.52

Add C.P & OH @15% on 18721.89 Cost for 21.90 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 983.11 Rs 983.10

Item Code: 9.105.3 P/F partition upto ceiling height consisting of G.I. frame and required board: 66 mm overall thickness partition with 8 mm thick double skin Calcium Sili- cate board. Details of Cost for : 21.90 Sqm Code Description Unit Quantity Rate Materials for 6.00x3.65 = 21.9 sqm. (Partition Panel) 8699 (i) 8 mm thick tapered edge calcium silicate sqm 43.80 223.00 board . 7367 (ii) 50mm floor and ceiling channel 2x6.00 m 12.00 60.00 = 12m 7369 (iii) 48mm stud-72x34x36x0.5mm metre 40.15 72.00 (6.00/0.61)+1 = 11x3.65= 40.15m 7020 (iv) Screw 20mm long (drive all scews) 100 N 392.00 56.00 [(3.65/0.30)+1]x11x2 = 308 [(6.00/0.30)+1]x2x2=84 = 392 7388 Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt [(6.00/0.61)+1]x2=22 each 22.00 48.00 7048 (vi) Rawl plug [(3.65/0.45)+1]x2= 18 each 18.00 10.00 0869 (vii) Plaster of paris, (88/100)x21.9 = 19.27 kilog 19.27 4.00 0763 (viii) Glue (22/100)x21.90=4.82 kilog 4.82 65.00 7018 (ix) Paper tape (120m roll) roll 0.584 140.00 (300/100)x21.90/120 = 0.584 Nos 7021 (x) Primer (36/100)21.90 = 7.88 litre litre 7.88 85.00 1022 (xi) Galvanised steel bolts & nuts 6mm dia. 10 No 44.00 20.00 25mm Long 11x2x2=44 1211 (xii) G.I. Plain washer for seam bolts 100 N 44.00 32.00 9999 Sundries carriage L.S. 52.00 1.49 9999 Sundries scaffolding L.S. 130.00 1.49 Labour for 21.90 sqm. 0111 Carpernter 1st class 0.3x21.90 Day 6.57 301.00 0112 Carpenter Ilnd class 0.13x21.90 Day 2.847 273.00 0131 Painter 0.05x21.90 Day 1.095 273.00 0114 Beldar 0.35x21.90 Day 7.665 247.00 Total: Add water charges @ 1% on 21295.92 Add C.P & OH @15% on 21508.88 Cost for 21.90 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1129.46 Rs 1129.45

Item Code: 9.105.4

DSR-12

Page 319 of 2298

P/F partition upto ceiling height consisting of G.I. frame and required board: 66 mm overall thickness partition using 8 mm thick double skin cement board as per IS:14862 with suita- ble fibre cement screws.

Code 0237 7367 7369 7020

7388

7048 0869 0763 7018 7021 1022 1211 9999 9999 0111 0112 0131 0114

Details of Cost for : 21.90 Sqm Description Unit Quantity Materials for 6.00x3.65 =21.9 sqm. (Partition Panel) (i) 8 mm thick multipurpose non asbestos fibre sqm 43.80 cement board. Materials for 6.00x3.65 =21.9 sqm. (Partition Panel) m 12.00 (iii) 48mm stud-72x34x36x0.5mm metre 40.15 (6.00/0.61)+1 = 11x3.65 = 40.15m (iv) Screw 20mm long (drive all scews) 100 N 392.00 [(3.65/0.30)+1]x11x2 = 308 [(6.00/0.30)+1]x2x2=84 = 392 Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt [(6.00/0.61)+1]x2=22 each 22.00 (vi) Rawl plug [(3.65/0.45)+1]x2= 18 each 18.00 (vii) Plaster of paris, (88/100)x21.9 = 19.27 kilog 19.27 (viii) Glue (22/100)x21.90=4.82 kilog 4.82 (ix) Paper tape (120m roll) roll 0.584 (300/100)x21.90/120 = 0.584 No. (x) Primer (36/100)21.90 = 7.88 litre litre 7.88 (xi) Galvanised steel bolts & nuts 6mm dia. 10 No 44.00 25mm Long 11x2x2=44 (xii) G.I. Plain washer for seam bolts 100 N 44.90 Sundries carriage L.S. 52.00 Sundries scaffolding L.S. 130.00 Labour for 21.90 sqm. Carpernter 1st class 0.3x21.90 Day 6.57 Carpenter Ilnd class 0.13x21.90 Day 2.847 Painter 0.05x21.90 Day 1.095 Beldar 0.35x21.90 Day 7.665 Add water charges @ 1% on

Rate 206.00 60.00 72.00 56.00

48.00 10.00 4.00 65.00 140.00 85.00 20.00 32.00 1.49 1.49 301.00 273.00 273.00 247.00 Total: 20551.61

Add C.P & OH @15% on 20757.13 Cost for 21.90 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1089.99 Rs 1089.95

Item Code: 9.106.1 P/F PTMT handle with necessary screws complete: 125 x 34 x 24 mm weighing not less than 24 grams. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS7512 PTMT handle 125x34x24mm Each 10.00 0639 Mild steel screws 25 mm 100 N 40.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter 2nd class Day 0.06 Add water charges @ 1% on

Rate 30.00 30.00 1.49 273.00 Total: 332.45

Add C.P & OH @15% on 335.77 Cost for 10.00 Nos Rate per Each:

DSR-12

Rs 38.61

Page 320 of 2298

Rate as per DSR-12:

Rs 38.60

Item Code: 9.106.2 P/F PTMT handle with necessary screws complete: 125 x 34 x 24 mm weighing not less than 24 grams. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS7513 PTMT handle 150x34x24mm Each 10.00 0639 Mild steel screws 25 mm 100 N 40.00 9999 Carriage of materials L.S. 2.73 LABOUR0112 Carpenter 2nd class Day 0.06 Add water charges @ 1% on

Rate 34.00 30.00 1.49 273.00 Total: 372.45

Add C.P & OH @15% on 376.17 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 43.26 Rs 43.25

Item Code: 9.107.1 P/F PTMT butt hinges with necessary screws complete: 75 x 60 x 10 mm fitted with 5.5 mm dia. M.S bright bar.

Code 7514 0638 9999 0112 0114

Description MATERIALSPTMT butt hinges 75x60x10mm Iron screws 30 mm Carriage of materials LABOURCarpenter 2nd class Beldar

Details of Cost for : 10.00 Nos Unit Quantity Each 100 N L.S. Day Day

Rate

10.00 60.00 1.82

42.00 40.00 1.49

0.14 0.09

273.00 247.00 Total: 507.16

Add water charges @ 1% on

Add C.P & OH @15% on 512.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 58.91 Rs 58.90

Item Code: 9.107.2 P/F PTMT butt hinges with necessary screws complete: 100 x 75 x 10 mm fitted with 5.5 mm dia. M.S bright bar.

Code 7515 0637 9999 0112 0114

Description MATERIALSPTMT butt hinges 100x75x 10mm Iron screws 40 mm Carriage of materials LABOURCarpenter 2nd class Beldar

Details of Cost for : 10.00 Nos Unit Quantity Each 100 N L.S. Day Day

10.00 80.00 2.73

56.00 50.00 1.49

0.14 0.09

273.00 247.00 Total: 664.52

Add water charges @ 1% on

DSR-12

Rate

Page 321 of 2298

Add C.P & OH @15% on 671.17 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 77.19 Rs 77.20

Item Code: 9.108.1 P/F PTMT tower bolts one piece 12mm rod with necessary screws complete: 152 x 42 x 18 mm weighing not less than 60 grams.

Code 7516 0638 9999 0112

Description MATERIALSPTMT Tower bolt 152x42x18mm Mild steel screws 30 mm Carriage of materials LABOURCarpenter 2nd class

Details of Cost for : 10.00 Nos Unit Quantity Each 100 N L.S. Day

Rate

10.00 60.00 2.73

65.00 40.00 1.49

0.08

273.00 Total: 699.91

Add water charges @ 1% on

Add C.P & OH @15% on 706.91 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 81.30 Rs 81.30

Item Code: 9.108.2 P/F PTMT tower bolts one piece 12mm rod with necessary screws complete: 202 x 42 x 18 mm weighing not less than 78 grams.

Code 7517 0638 9999 0112

Description MaterialsPTMT Tower bolt 202x42x 18mm Mild steel screws 30 mm Carriage of materials LABOURCarpenter 2nd class

Details of Cost for : 10.00 Nos Unit Quantity Each 100 N L.S. Day

Rate

10.00 80.00 2.73

80.00 40.00 1.49

0.10

273.00 Total: 863.37

Add water charges @ 1% on

Add C.P & OH @15% on 872.00 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 100.28 Rs 100.30

Item Code: 9.109 P/F PTMT door clacher of length 72 mm and dia. of 42 mm with suitable washers weighing 33 grams. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS7518 PTMT door catcher 72x42mm Each 10.00 0639 Mild steel screws 25 mm 100 N 20.00 9999 Carriage of materials L.S. 2.73 LABOUR0111 Carpenter 1st class Day 0.03

DSR-12

Rate 27.00 30.00 1.49 301.00 Total:

Page 322 of 2298

Add water charges @ 1% on

289.10

Add C.P & OH @15% on 291.99 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 33.58 Rs 33.60

Item Code: 9.110 P/F Bamboo jaffery/ fencing consisting of superior quality 25 mm dia. half cut bamboo. Details of Cost for : 2.10 Sqm Code Description Unit Quantity Details of cost for a bamboo jaffery of size 1.00m x 2.10m = 2.10 sqm MATERIALS (I) Bamboo 25mm of 100/ 2.50 = 40 nos Half cut off = 40/2 .=20 nos. x 2.10 = 42.00m Add wastage @ 15% = 6.30 m Total = 48.30m 0305 Bamboo 25 mm dia 2.5 metre long score 48.30 9999 Carriage of Bamboo L.S. 4.83 Hollock wood scantling 3 nos. (1.00 x 0.05 x 0.025) = 0.00375 cum Add wastage @ 5% = 0.00019 cum Total = 0.00394 cum or 3.94 cudm 2466 Hollock wood in scantling cum 0.00394 2204 Carraige of Timber cum 0.0039 9999 Nails and wire L.S. 20.25 LABOUR 0112 Carpenter 2nd class Day 0.25 0114 Beldar Day 0.25 9999 Sundries L.S. 10.05 Add water charges @ 1% on

Rate

300.00 1.49

31000.00 100.11 1.49 273.00 247.00 1.49 Total: 594.67

Add C.P & OH @15% on 600.62 Cost for 2.10 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 328.91 Rs 328.90

Item Code: 9.111.1 P/F wooden moulded corner beading of triangular shape: 50x50 mm (base and height). Details of Cost for : 5.00 m Code Description Unit Quantity MATERIALS Teak wood 2nd class in plan ks 5.00x.05x.05/2 = 0.00625 cum

1190 2204 0637

13.050.01

DSR-12

Add wastage @10% = 0.00063 total = 0.00688 cum say 6.88 cudm Second class teak wood in planks cum Carriage of Timber cum Iron screws 100 N Priming coat Area 5.0 x (.05 +.05) = 0.50 sqm Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) LABOUR:-

Rate

0.00688 0.0069 6.00

72000.00 100.11 50.00

0.50

25.83

Page 323 of 2298

0111

For plaining, fixing & making design Carpenter 1st class

Day

0.75

Add water charges @ 1% except on [A] i.e on

301.00 Total: 724.80

Add C.P & OH @15% except on [A] i.e on 732.05 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 170.96 Rs 170.95

Item Code: 9.112 P/F second class teak wood lipping/moulded beading or taj beading of size 18x5mm. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS 8719 2nd class teak wood lipping/ moulded beadibg or Taj beading metre 10.00 of size 18X5mm LABOUR 0112 Carpenter 2nd class Day 0.25 0114 Beldar Day 0.25 Add water charges @ 1% on

Rate 25.00

273.00 247.00 Total: 380.00

Add C.P & OH @15% on 383.80 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 44.14 Rs 44.15

Item Code: 9.113 P/F 100mm CP brass mortice lock 6 levers without handles.. .. Code 8716 0111 9999

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS: 100 mm mostice lock with 6 levers for aluminium door. LABOUR Carpenter 1st class Sundries(screws, carriage etc)

Rate

each

1.00

310.00

Day L.S.

0.13 2.60

301.00 1.49 Total: 353.00

Add water charges @ 1% on

Add C.P & OH @15% on 356.53 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 410.01 Rs 410.00

Item Code: 9.114.1 P/F magnetic catcher in cup- board/ward robe shutters: Triple strip vertical type. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 8714 Magenatic catcher triple strip verticle type. each 1.00 9999 Sundries including screws and fixing charges. L.S. 2.60 Add water charges @ 1% on

DSR-12

Rate 15.00 1.49 Total: 18.87

Page 324 of 2298

Add C.P & OH @15% on 19.06 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 21.92 Rs 21.90

Item Code: 9.114.2 P/F magnetic catcher in cup- board/ward robe shutters: Doublee strip horizontal type. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 8715 Magenatic catcher double strip horizontal type. each 1.00 9999 Sundries including screws and fixing charges. L.S. 2.60 Add water charges @ 1% on

Rate 12.00 1.49 Total: 15.87

Add C.P & OH @15% on 16.03 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 18.43 Rs 18.45

Item Code: 9.115 P/F powder coated telescopic drawer channels 300 mm long. Code 8703 9999 9999

Description MATERIALS Telescopic drawer channels 300mm long. Carriage Sundries including screws and fixing charges.

Details of Cost for : 10.00 sets Unit Quantity set L.S. L.S.

10.00 19.50 100.10

Add water charges @ 1% on

Rate 135.00 1.49 1.49 Total: 1528.21

Add C.P & OH @15% on 1543.49 Cost for 10.00 sets Rate per Each Set: Rate as per DSR-12:

Rs 177.50 Rs 177.50

Item Code: 9.116 P/F sliding arrangement in racks/ cupboards/ cabinate shutter. Code

Description

Details of Cost for : 1.00 No. Unit Quantity

Rate

MATERIALS 8704 9999

Labour for fixing

each L.S.

1.00 1.04

Add water charges @ 1% on

8.00 1.49 Total: 9.55

Add C.P & OH @15% on 9.65 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 11.10 Rs 11.10

Page 325 of 2298

Item Code: 9.117.1 P/F factory made UPVC door frame made of UPVC extruded section: Extruded section profile size 48 x 40 mm. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS 8010 48mmX40mmX2mm thick Factory made door frame of PVC Metre 5.00 142.00 extruded sections in white, grey or woo LABOUR 0156 Carpenter (average) Day 0.15 287.00 0114 Beldar Day 0.15 247.00 9999 Sundries L.S. 4.68 1.49 Total: Add water charges @ 1% on 797.07 Add C.P & OH @15% on 805.04 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 185.16 Rs 185.15

Item Code: 9.117.2 P/F UPVC door frame - Extruded section profile size 42 x 50 mm._x000D_ Details of Cost for : 5.00 m Unit Quantity

Code

Description

8705

MATERIALS: 50mm x 42mm x 2mm thick Factory made door frame of PVC extruded sections in white,

0156 0114 9999

LABOUR : Carpenter (average) Beldar Sundries :

Rate

metre

5.00

135.00

Day Day L.S.

0.15 0.15 4.68

287.00 247.00 1.49 Total: 762.07

Add water charges @ 1% on

Add C.P & OH @15% on 769.69 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 177.03 Rs 177.05

Item Code: 9.118.1 P/F to existing door frames: 24 mm thick factory made PVC door shutter. Code

8001

0156 0114 9999

DSR-12

Details of Cost for : 2.38 Sqm Description Unit Quantity Detail of cost for 2.38 sqm one door shutter 2.20x1.08m = 2.38 sqm MATERIALS 24 mm thick Factory made shutters with frame, rails and sqm 2.38 panels of PVC extruded sections i LABOUR Carpenter (average) Day 0.40 Beldar Day 0.40 Sundries L.S. 20.36

Rate

2025.00

Add water charges @ 1% on

287.00 247.00 1.49 Total: 5063.44

Add C.P & OH @15% on

5114.07

Page 326 of 2298

Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2471.08 Rs 2471.10

Item Code: 9.118.2 P/F to existing door frames: 30 mm thick factory made PVC door shutter with decorative moulding edging. Details of Cost for : 2.38 Sqm Code Description Unit Quantity Detail of cost for 2.38 sqm. one door shutter 2.20x1.08m = 2.38 sqm MATERIALS 8002 30 mm thick Factory made shutters with frame, rails and sqm 2.38 panels of PVC extruded sections i LABOUR 0156 Carpenter (average) Day 0.40 0114 Beldar Day 0.40 9999 Sundries L.S. 20.36 Add water charges @ 1% on

Rate

2125.00

287.00 247.00 1.49 Total: 5301.44

Add C.P & OH @15% on 5354.45 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2587.24 Rs 2587.25

Item Code: 9.118.3 P/F to existing door frames: 25 mm thick (PVC) flush door shutter made out of a one piece Multi chamber extruded PVC section of the size of 762 mm x 25 mm or less. Details of Cost for : 2.38 Sqm Code Description Unit Quantity Rate Details of Cost one door shutter 2.20x1.08m = 2.38 sqm MATERIALS 8706 25mm thick factory made PVC flash foor shutter. sqm 2.38 2050.00 LABOUR 0156 Carpenter (average) Day 0.40 287.00 0114 Beldar Day 0.40 247.00 9999 Sundries L.S. 20.36 1.49 Total: Add water charges @ 1% on 5122.94 Add C.P & OH @15% on 5174.17 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2500.13 Rs 2500.15

Item Code: 9.119 P/F factory made PVC door frame of size 50x 47 mm with a wall thickness of 5 mm. Details of Cost for : 5.00 m Code Description Unit Quantity Details of cost for one door frame of 5 metre MATERIALS8011 Factory made door frame PVC extruded sheet i/c carriage metre 5.00

Rate

330.00

LABOUR-

DSR-12

Page 327 of 2298

0156 0114 9999

Carpenter (average) Beldar Sundries

Day Day L.S.

0.15 0.15 7.80

Add water charges @ 1% on

287.00 247.00 1.49 Total: 1741.72

Add C.P & OH @15% on 1759.14 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 404.60 Rs 404.60

Item Code: 9.120.1 P/F UPVC door shutter - 30mm thick factory made_x000D_ panel PVC door shutters (for W.C. and bathroom_x000D_ Code

8003 8100 0637 0640 0156 0114 9999

Details of Cost for : 2.38 Sqm Description Unit Quantity DETAILS OF COST OF ONE SHUTTER 2.20X1.08M = 2.38 SQM MATERIALSFactory made shutter i/c carriage sqm 2.38 Powder coated M.S. Butt Hinges 10 No 4.00 MS Screws 40mm 100 N 48.00 MS screws 20mm 100 N 8.00 LABOUR : Carpenter (average) Day 0.40 Beldar Day 0.40 Sundries L.S. 20.36 Add water charges @ 1% on

Rate

2025.00 79.00 50.00 25.00 287.00 247.00 1.49 Total: 5121.04

Add C.P & OH @15% on 5172.25 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2499.20 Rs 2499.20

Item Code: 9.120.2 P/F to existing door frames: 30 mm thick factory made solid both side pre-laminated panel P.V.C. door shutter.

Code

8004 8100 0637 0640 0156 0114 9999

Description Details of cost of one shutter 2.20x1.08m = 2.38 sqm MATERIALSFactory made PVC shutter i/c carriage Powder coated M.S. butt hinges 100mm X58mmX1.9mm M.S. screws 40mm M.S. screws 20mm LABOURCarpenter (average) Beldar Sundries

Details of Cost for : 2.38 Sqm Unit Quantity

Rate

sqm 10 No 100 N 100 N

2.38 4.00 48.00 8.00

2420.00 79.00 50.00 25.00

Day Day L.S.

0.40 0.40 20.36

287.00 247.00 1.49 Total: 6061.14

Add water charges @ 1% on

Add C.P & OH @15% on 6121.75 Cost for 2.38 Sqm

DSR-12

Page 328 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 2957.99 Rs 2958.00

Item Code: 9.121 P/F of Fiber Reinforced plstic (FRP) Door frames of of size 90 mm x 45 mm._x000D_ Details of Cost for : 5.00 m Code Description Unit Quantity 8707 Factory made glass reinforced plastic door frame 90x45 mm metre 5.00 i/c carriage LABOUR : 0156 0114 9999

Carpenter (average) Beldar Sundries

Day Day L.S.

0.15 0.15 7.80

Add water charges @ 1% on

Rate 365.00

287.00 247.00 1.49 Total: 1916.72

Add C.P & OH @15% on 1935.89 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 445.25 Rs 445.25

Item Code: 9.122.1 P/F to existing door frames: 30 mm thick Glass fiber Reinforced plastic (FRP) panelled door shutter. Details of Cost for : 2.38 Sqm Code Description Unit Quantity MATERIALS8708 30 mm thick factory made glass fiber reinforced plastic panel sqm 2.38 door shutter i/c carriag 8100 Powder coated M.S. butt hinges 100mm X58mmX1.9mm 10 No 4.00 0637 M.S. screws 40mm 100 N 48.00 0640 M.S. screws 20mm 100 N 8.00 LABOUR0156 Carpenter (average) Day 0.40 0114 Beldar Day 0.40 9999 Sundries L.S. 20.36 Add water charges @ 1% on

Rate 1715.00 79.00 50.00 25.00 287.00 247.00 1.49 Total: 4383.24

Add C.P & OH @15% on 4427.07 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2139.13 Rs 2139.15

Item Code: 9.122.2 P/F to existing door frames: 30 mm thick Glass fiber Reinforced plastic (FRP) flush door shutter. Details of Cost for : 2.38 Sqm Code Description Unit Quantity Details of cost of one shutter 2.20x1.08m = 2.38 sqm MATERIALS8730 30 mm thick factory made glass fiber reinforced plastic flush sqm 2.38 door shutter i/c carriage 8100 Powder coated M.S. butt hinges 100mm X58mmX 1.9mm 10 No 4.00 0637

DSR-12

M.S. screws 40mm

100 N

48.00

Rate

1975.00 79.00 50.00

Page 329 of 2298

0640 0156 0114 9999

M.S. screws 20mm LABOURCarpenter (average) Beldar Sundries

100 N Day Day L.S.

8.00

25.00

0.40 0.40 20.36

287.00 247.00 1.49 Total: 5002.04

Add water charges @ 1% on

Add C.P & OH @15% on 5052.06 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2441.12 Rs 2441.10

Item Code: 9.123 P/F factory made door frame (Single rebate) made of solid P.V.C. foam profile of size 60 mm width and 30 mm thick.

Code

8710

Description Details of cost for one door frame of 5 metre MATERIALSFactory made solid PVC door frame 60 x30mm i/c carriage.

0156 0114 9999

LABOURCarpenter (average) Beldar Sundries

Details of Cost for : 5.00 m Unit Quantity

Rate

metre

5.00

270.00

Day Day L.S.

0.15 0.15 7.80

287.00 247.00 1.49 Total: 1441.72

Add water charges @ 1% on

Add C.P & OH @15% on 1456.14 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 334.91 Rs 334.90

Item Code: 9.124.1 P/F factory made 30mm solid PVC foam PVC door shutter .. Non decorative finish. Details of Cost for : 2.38 Sqm Code Description Unit Quantity MATERIALS: 8712 30 mm thick factory made solid PVC profile panelled door Sqm 2.38 single piece extruded profile non 8100 Powder coated M.S. butt hinges 100mm X58mmX1.9mm 10 No 4.00 0637 Bright finished or black enameled mild steel screws 40 mm 100 N 48.00 0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0156 0114 9999

LABOUR: Carpenter (average) Beldar Sundries

Day Day L.S.

Rate 2120.00 79.00 50.00

8.00

25.00

0.40 0.40 20.36

287.00 247.00 1.49 Total: 5347.14

Add water charges @ 1% on

Add C.P & OH @15% on 5400.61 Cost for 2.38 Sqm

DSR-12

Page 330 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 2609.54 Rs 2609.55

Item Code: 9.124.2 P/F factory made 30mm solid PVC foam PVC door shutter .. Decorative finish (both sides wood grains) Details of Cost for : 2.38 Sqm Code Description Unit Quantity MATERIALS: 8709 30mm thick factory made solid PVC profile panelled doort Sqm 2.38 single piece extruded profile dec 8100 Powder coated M.S. butt hinges 100mm X58mmX1.9mm 10 No 4.00 0637 Bright finished or black enameled mild steel screws 40 mm 100 N 48.00 0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0156 0114 9999

LABOUR: Carpenter (average) Beldar Sundries

Day Day L.S.

Rate 2500.00 79.00 50.00

8.00

25.00

0.40 0.40 20.36

287.00 247.00 1.49 Total: 6251.54

Add water charges @ 1% on

Add C.P & OH @15% on 6314.06 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3050.91 Rs 3050.90

Item Code: 9.125 P/F PVC rigid foam sheet 1 mm thick on bath, WC existing door shutters. Code

8006

9999 0111 0114 0130

Description Details of cost for 1.0x0.3m = 0.3 sqm MATERIALSPVC rigid foam sheet1mm thick = 0.30 sqm Add wastage @ 10% = 0.03 sqm Total = 0.33 sqm Rubber adhesive LABOURCarpenter 1 st class Beldar Mistry

Details of Cost for : 0.30 Sqm Unit Quantity

Rate

sqm

0.33

173.00

L.S.

21.84

1.49

Day Day Day

0.11 0.14 0.02

301.00 247.00 301.00 Total: 163.34

Add water charges @ 1% on

Add C.P & OH @15% on 164.97 Cost for 0.30 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 632.40 Rs 632.40

Item Code: 9.126.1 P/F 12 mm thick panelling or penelling and glazed in penelled/ penelled & glazed shutters for doors, windows: Marine plywood of lamination/ painting as per IS: 710. Details of Cost for : 0.67 Sqm Code Description Unit Quantity Rate

DSR-12

Page 331 of 2298

8724 9999 0111 9999

Details of cost for shutters of a door with 2/3rd panelling...200x 108cm = 2.16sqm. Panel area = 4x45.1x36.55cm = 0.67sqm. MATERIALS: Plywood 4x47.2x38.65cm = 0.73sqm+ Add for wastage @ 10% = 0.07sqm. Total = 0.80 sqm. 12mm thick marine plywood conforming to IS:710 sqm Carriage of Plywood L.S. LABOUR: Carpenter 1 st class Day Sundries L.S.

0.80 1.82

825.00 1.49

0.57 4.42

301.00 1.49 Total: 840.87

Add water charges @ 1% on

Add C.P & OH @15% on 849.28 Cost for 0.67 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1457.72 Rs 1457.70

Item Code: 9.126.2 P/F 12 mm thick panelling or penelling and glazed in penelled/ penelled & glazed shutters for doors, windows: Fire retardant ply wood of laminationas as per IS: 710. Details of Cost for : 0.67 Sqm Code Description Unit Quantity Rate Details of cost for shutters of a door with 2/3rd panelling.. .200x 108cm = 2.16sqm. Panel area = 4x45.1x36.55cm = 0.67sqm. MATERIALS: Plywood 4x47.2x38.65cm = 0.73sqm+ Add for wastage @ 10% = 0.07sqm. Total = 0.80 sqm. 8725 12mm thick fire retardant plywood conforming to IS: 5509. sqm 0.80 860.00 9999 0111 9999

Carriage of Plywood LABOUR: Carpenter 1 st class Sundries

L.S.

1.82

1.49

Day L.S.

0.57 4.42

301.00 1.49 Total: 868.87

Add water charges @ 1% on

Add C.P & OH @15% on 877.56 Cost for 0.67 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1506.25 Rs 1506.25

Item Code: 9.127.1 P/F decorative high pressure laminated sheet of plain/wood grain in gloss/ matt/ suede finish with high density: 1.50 mm thick.

Code

8726

DSR-12

Description MATERIALS Decorative laminate = 5.00 sqm Add wastage @ 10% = 0.50 sqm Total = 5.50 sqm 1.5mm thick decorative laminated sheet

Details of Cost for : 5.00 Sqm Unit Quantity

sqm

5.50

Rate

475.00

Page 332 of 2298

9999 0111 0114 9999

Adhesive LABOUR:Carpenter 1 st class Beldar Sundries i/c nails etc.

L.S.

195.00

1.49

Day Day L.S.

0.50 0.50 52.00

301.00 247.00 1.49 Total: 3254.53

Add water charges @ 1% on

Add C.P & OH @15% on 3287.08 Cost for 5.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 756.03 Rs 756.05

Item Code: 9.127.2 P/F decorative high pressure laminated sheet of plain/wood grain in gloss/ matt/ suede finish with high density: 1.00 mm thick.

Code

8727 9999 0111 0114 9999

Details of Cost for : 5.00 Sqm Unit Quantity

Description MATERIALS Decorative laminate = 5.00 sqm Add wastage @ 10% = 0.50 sqm Total = 5.50 sqm 1.0mm thick decorative laminated sheet Adhesive LABOUR:Carpenter 1st class Beldar Sundries i/c nails etc.

Rate

sqm L.S.

5.50 195.00

350.00 1.49

Day Day L.S.

0.50 0.50 52.00

301.00 247.00 1.49 Total: 2567.03

Add water charges @ 1% on

Add C.P & OH @15% on 2592.70 Cost for 5.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 596.32 Rs 596.30

Item Code: 9.128 P/F factory made fiber glass reinfoced plastices (FRP) chajjas 4 mm thick. Code

8713

Description Detail of cost for a chajja 0.90 x 0.60 = 0.54 sqm MATERIALS Fiber glass reinforced plastic chajja including accessories.

9999 9999

Carriage fixing charges including sundries.

Details of Cost for : 0.54 Sqm Unit Quantity

sqm L.S. L.S.

Rate

0.54

3460.00

26.00 143.00

1.49 1.49 Total: 2120.21

Add water charges @ 1% on

Add C.P & OH @15% on 2141.41 Cost for 0.54 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 4560.41 Rs 4560.40

Page 333 of 2298

Item Code: 9.129 P/F cupboard shutter 25 mm thick, with pre-laminated flat pressed three layer particle one side decorative lamination i/c IInd Class wood lipping of 25 x 12 mm. Details of Cost for : 2.20 Sqm Code Description Unit Quantity Rate Details of cost for one shutter 2.20x1.00m = 2.20sqm. MATERIALS 7272 25 mm thick cup board shutter (prelaminated) sqm 2.20 870.00 9999 Carriage L.S. 29.64 1.49 8678 lmm thick 35mm wide bright finished stainless steel piano metre 4.40 37.00 hinges . 0685 Screws 25 mm long 100 N 125.00 35.00 LABOUR 0111 Carpenter 1 st class Day 0.50 301.00 0114 Beldar Day 0.50 247.00 0130 Mistry Day 0.07 301.00 7271 Add for wooden lipping 25 mm wide x 12 mm metre 7.00 39.00 Total: Add water charges @ 1% on 2732.78 Add C.P & OH @15% on 2760.11 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1442.79 Rs 1442.80

Item Code: 9.130.1 P/F cup board shutters with 25mm thick veneering particle board IS:3087 marked exterior grade-I of approved make: with decorative veneering on one side and commercial other side. Details of Cost for : 2.20 Sqm Code Description Unit Quantity Rate Details of cost for one shutter 2.20x1.00m = 2.20sqm. MATERIALS 7269 25 mm thick cup board shutter sqm 2.20 460.00 0346 Extra for teak veneering on one side and commercial sqm 2.20 235.00 veneereing on other side 9999 Carriage L.S. 29.64 1.49 8678 lmm thick 35mm wide bright finished stainless steel piano metre 4.40 37.00 hinges. 0685 Screws 25 mm long 100 N 125.00 35.00 LABOUR 0111 Carpenter 1st class Day 0.50 301.00 0114 Beldar Day 0.50 247.00 0130 Mistry Day 0.07 301.00 7271 Add for wooden lipping 25 mm wide x 12 mm thick metre 7.00 39.00 Total: Add water charges @ 1% on 2347.78 Add C.P & OH @15% on 2371.26 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1239.52 Rs 1239.50

Item Code: 9.130.2 P/F cup board shutters with 25mm thick veneering particle board IS:3087 marked exterior grade-I of approved make: With nondecorative veneering on both sides. Details of Cost for : 2.20 Sqm

DSR-12

Page 334 of 2298

Code

7269 0347 9999 8678 0685 0111 0114 0130 7271

Description Unit Details of cost for one shutter 2.20x1.00m = 2.20sqm. MATERIALS 25 mm thick particle board sqm Extra for commercial veneering on both sides sqm Carriage L.S. 1mm thick 35mm wide bright finished stainless steel piano metre hinges. Screws 25 mm long 100 N LABOUR Carpenter 1 st class Day Beldar Day Mistry Day Add for wooden lipping 25 mm wide x 12 mm metre

Quantity

Rate

2.20 2.20 29.64 4.40

460.00 155.00 1.49 37.00

125.00

35.00

0.50 0.50 0.07 7.00

301.00 247.00 301.00 39.00 Total: 2171.78

Add water charges @ 1% on

Add C.P & OH @15% on 2193.50 Cost for 2.20 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1146.60 Rs 1146.60

Item Code: 9.131.1 P/F factory made pre-laminated particle board flat pressed three layer particle board one side decorative finish: 25 mm thick.

Code

7445 7443 7444 0834 9999 9999 0112 0114

Description Details of cost for 2.10 sqm. (Door size 2.1x1.00 = 2.10 sqm.) MATERIALS Prelaminated particle board = 2.10sqm. + Add for wastage @ 5% = 0.11 sqm. = 2.21sqm. Prelaminated particle board Aluminium single cleat of size 30x32x3 Aluminium grip strip of size 50x12x2 Edge sealing water resistant paint Carriage of materials including loading and unloading Sundries and screws etc. LABOUR Carpenter 2nd class Beldar

Details of Cost for : 2.10 Sqm Unit Quantity

Rate

sqm each each litre L.S. L.S.

2.21 4.00 8.00 0.15 19.50 39.00

790.00 13.00 10.00 135.00 1.49 1.49

Day Day

0.27 0.30

273.00 247.00 Total: 2133.13

Add water charges @ 1% on

Add C.P & OH @15% on 2154.46 Cost for 2.10 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1179.82 Rs 1179.80

Item Code: 9.132 P/F aluminium U beading of required size to pre-laminated / flush door shutter. Details of Cost for : 1.00 Kg Code Description Unit Quantity MATERIAL Aluminum U beading = 1.00kg +

DSR-12

Rate

Page 335 of 2298

7449 9999 9999

Add 10% wastage = 0.10 = 1.10kg. Aluminium ‘U’ Beading Anodized 15 micron Sundries including screws, fixing, carriage etc.

kilog L.S. L.S.

1.10 65.00 13.00

Add water charges @ 1% on

208.00 1.49 1.49 Total: 345.02

Add C.P & OH @15% on 348.47 Cost for 1.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 400.74 Rs 400.75

Item Code: 9.133.1.1 P/F in position concealed G.I section for wall panelling using board: Tapered edge calcium silicate board made with calcareous and siliceous materials: 10 mm thick. Details of Cost for : 11.16 Sqm Code Description Unit Quantity Rate Details of cost for 3.66 mx 3.05 m =11.16 sqm. MATERIALS Calcium silicate board 10mm thick.= 11.16 sqm Add wastage @ 10% = 1.12 sqm. Total = 12.28 sqm 8700 10 mm thick calcium silicate board. sqm 12.28 370.00 8720 Ceiling sections. metre 19.66 39.00 8721 Perimeter channel metre 9.60 25.00 8722 Nylon sleeves & wooden screws (40mm) each 42.00 1.90 8723 Counter sunk ribbed head screw 25mm. cent 1.76 72.00 9999 Jointing compound L.S. 20.80 1.49 7018 Joint tape roll roll 0.19 140.00 9999 Sundries i/c rawl plug, scaffolding etc. L.S. 52.00 1.49 9999 Carriage of materials L.S. 26.00 1.49 LABOUR:0111 Carpenter 1st class Day 3.80 301.00 0114 Beldar Day 4.60 247.00 Total: Add water charges @ 1% on 8210.67 Add C.P & OH @15% on 8292.78 Cost for 11.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 854.54 Rs 854.55

Item Code: 9.133.2.1 P/F in position concealed G.I section for wall panelling using board: Non asbestos multipurpose cement board reinfoced with cellulose fiber: 8 mm thick. Details of Cost for : 11.16 Sqm Code Description Unit Quantity Rate Details of cost for 3.66 m x 3.05 m =11.16 sqm. MATERIALS Multipurpose non asbestos fibre cement board 8mm thick.= 11.16 sqm Add wastage @ 10% =1.12 sqm. Total = 12.28 sqm 0237 8 mm thick multipurpose non asbestos fibre cement board. sqm 12.28 206.00

DSR-12

Page 336 of 2298

8720 8721 8722 8723 9999 7018 9999 9999 0111 0114

Ceiling sections. Perimeter channel Nylon sleeves & wooden screws (40mm) Counter sunk ribbed head screw 25mm. Jointing compound Joint tape roll Sundries i/c rawl plug, scaffolfing etc. Carriage of materials LABOUR:Carpenter 1st class Beldar

metre metre each cent L.S. roll L.S. L.S. Day Day

19.66 9.60 42.00 1.76 20.80 0.19 52.00 26.00

39.00 25.00 1.90 72.00 1.49 140.00 1.49 1.49

3.80 4.60

301.00 247.00 Total: 6196.75

Add water charges @ 1% on

Add C.P & OH @15% on 6258.72 Cost for 11.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 644.94 Rs 644.95

Item Code: 9.133.3.1 P/F in position concealed G.I section for wall panelling using board: Gypsum board conforming to IS: 2095-1996 Part-I: 12.5 mm thick. Details of Cost for : 11.16 Sqm Code Description Unit Quantity Rate Details of cost for 3.66 m x 3.66 m - 11.16 sqm. MATERIALS Glass fibre reinforced gypsum board 12.5 mm thick.= 11.16 sqm Add wastage @ 10% = 1.12 sqm. Total = 12.28 sqm 8717 12.5 mm thick Glass fibre reinforced Gypsum board. sqm 12.28 160.00 8720 Ceiling sections. metre 19.66 39.00 8721 Perimeter channel metre 9.60 25.00 8722 Nylon sleeves & wooden screws (40mm) each 42.00 1.90 8723 Counter sunk ribbed head screw 25mm. cent 1.76 72.00 9999 Jointing compound L.S. 20.80 1.49 7018 Joint tape roll roll 0.19 140.00 9999 Sundries i/c rawl plug, scaffolfing etc. L.S. 52.00 1.49 9999 Carriage of materials L.S. 26.00 1.49 LABOUR:0111 Carpenter 1st class Day 3.80 301.00 0114 Beldar Day 4.60 247.00 Total: Add water charges @ 1% on 5631.87 Add C.P & OH @15% on 5688.19 Cost for 11.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 586.15 Rs 586.15

Item Code: 9.134.1.1.1 P/F wire gauge shutters using stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - M.S. pressed butt hinges - Second class teak wood

Code

DSR-12

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

Page 337 of 2298

1190

MATERIALS: TEAK WOOD (2ND CLASS) Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Second class teak wood in planks Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

cum

0.0514

72000.00

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50 mm dia wire Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

2204

Carraige of Timber LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

cum

0.0514

100.11

Day Day Day Day L.S.

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 5838.87

8737 0595 0597

0111 0112 0114 0130 9999

Add water charges @ 1% on

Add C.P & OH @15% on 5897.26 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3139.75 Rs 3139.75

Item Code: 9.134.1.1.2 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - M.S. pressed butt hinges - Kiln seasoned chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Hollock wood : Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm

DSR-12

Page 338 of 2298

2505 2204 2504 9999

Hollock wood in planks Carraige of Timber Kiln seasoning of timber Chemical treatment Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

cum cum cum L.S.

0.0514 0.0514 0.0514 8.97

35000.00 100.11 680.00 1.49

8737

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50 mm dia wire Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111 0112 0114 0130 9999

LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Day Day Day Day L.S.

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 3985.39

0595 0597

Add water charges @ 1% on

Add C.P & OH @15% on 4025.24 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2143.07 Rs 2143.05

Item Code: 9.134.1.1.3 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - M.S. pressed butt hinges - Kiln seasoned selected class sesham wood.

Code

1200 2204 2504

8737

DSR-12

Description MATERIALS: Sesham wood : Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

Cum cum cum

0.0514 0.0514 0.0514

65000.00 100.11 680.00

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire

1.41

760.00

Page 339 of 2298

0595

0637

Bright finished or black enameled mild steel butt hinges 10 No 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 10 No 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm 100 N

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0111 0112 0114 0130 9999

LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Day Day Day Day L.S.

0597

6.00

80.00

2.00

45.00

48.00

50.00

8.00

25.00

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 5514.02

Add water charges @ 1% on

Add C.P & OH @15% on 5569.16 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2965.06 Rs 2965.05

Item Code: 9.134.1.2.1 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - Stainless steel butt hinges - Second class teak wood

Code

1190 2204

8737 8220 8218 8211 8214 0111 0112 0114 0130

DSR-12

Description MATERIALS: TEAK WOOD (2ND CLASS) Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Second class teak wood in planks Carraige of Timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Details of Cost for : 2.16 Sqm Unit Quantity

cum cum

0.0514 0.0514

72000.00 100.11

1.41

760.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day

1.30 0.90 1.05 0.105

301.00 273.00 247.00 301.00

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry

Rate

Page 340 of 2298

9999

Sundries

L.S.

33.80

Add water charges @ 1% on

1.49 Total: 6020.07

Add C.P & OH @15% on 6080.27 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3237.18 Rs 3237.20

Item Code: 9.134.1.2.2 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - Stainles steel butt hinges - Kiln seasoned chemically treated hollock wood.

Code

2505 2204 2504 9999

8737 8220 8218 8211 8214 0111 0112 0114 0130 9999

Description MATERIALS: Hollock wood : Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Hollock wood in planks Carraige of Timber Kiln seasoning of timber Chemical treatment Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Details of Cost for : 2.16 Sqm Unit Quantity

cum cum cum L.S.

0.0514 0.0514 0.0514 8.97

35000.00 100.11 680.00 1.49

1.41

760.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 4166.59

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Rate

Add water charges @ 1% on

Add C.P & OH @15% on 4208.26 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 2240.51 Rs 2240.50

Page 341 of 2298

Item Code: 9.134.1.2.3 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - Stainles steel butt hinges - Kiln seasoned selected class sesham wood.

Code

1200 2204 2504

8737 8220 8218 8211 8214 0111 0112 0114 0130 9999

Description MATERIALS: Sesham wood : Styles 4x200x9.5x3.5 cm = 0.026 cum + Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum + Lock and bottom rails: 2 x 110.5 x 19.7x3.5 cm = 0.0152 cum + Beading (2x.312+2X150)x1.2x1.2 cm = 0.001 cum Total = 0.0464 cum Add for wastage @ 10% = 0.005 cum Grand Total : 0.0514 cum or 51.4 cudm Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Details of Cost for : 2.16 Sqm Unit Quantity

Cum cum cum

0.0514 0.0514 0.0514

65000.00 100.11 680.00

1.41

760.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.30 0.90 1.05 0.105 33.80

301.00 273.00 247.00 301.00 1.49 Total: 5695.22

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Rate

Add water charges @ 1% on

Add C.P & OH @15% on 5752.17 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3062.50 Rs 3062.50

Item Code: 9.134.2.1.1 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - M.S. pressed butt hinges - Second class teak wood

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Teak wood (2nd class) Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings -

DSR-12

Page 342 of 2298

(2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 1190 2204

Second class teak wood in planks Carraige of Timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

cum cum

0.044 0.044

72000.00 100.11

8737

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50 mm dia wire Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111 0112 0114 0130 9999

LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Day Day Day Day L.S.

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 5234.06

0595 0597

Add water charges @ 1% on

Add C.P & OH @15% on 5286.40 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2814.52 Rs 2814.50

Item Code: 9.134.2.1.2 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - M.S. pressed butt hinges - Kiln seasoned Chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Hollock wood : Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 2505 2204 2504 9999

DSR-12

Hollock wood in planks Carraige of Timber Kiln seasoning of timber Chemical treatment Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm

cum cum cum L.S.

0.044 0.044 0.044 8.97

35000.00 100.11 680.00 1.49

Page 343 of 2298

Total = 1.41 sqm 8737

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50 mm dia wire Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111 0112 0114 0130 9999

LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Day Day Day Day L.S.

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 3649.35

0595 0597

Add water charges @ 1% on

Add C.P & OH @15% on 3685.84 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1962.37 Rs 1962.35

Item Code: 9.134.2.1.3 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - M.S. pressed butt hinges - Kiln seasoned selected class of sesham wood.

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Kiln seasoned selected class of sesham wood. Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 1200 2204 2504

Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

Cum cum cum

0.044 0.044 0.044

65000.00 100.11 680.00

8737

Stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50 mm dia wire Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

100 N

48.00

50.00

0595 0597 0637

DSR-12

Page 344 of 2298

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0111 0112 0114 0130 9999

LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Day Day Day Day L.S.

8.00

25.00

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 4955.98

Add water charges @ 1% on

Add C.P & OH @15% on 5005.54 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2664.99 Rs 2665.00

Item Code: 9.134.2.2.1 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - Stainles steel hinges - Second class teak wood

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Teak wood (2nd class) Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 1190 2204

Second class teak wood in planks Carraige of Timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

8737

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220 8218 8211 8214 0111 0112 0114 0130 9999

Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

cum cum

0.044 0.044

72000.00 100.11

1.41

760.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 5415.26

Add water charges @ 1% on

Add C.P & OH @15% on 5469.41 Cost for 2.16 Sqm

DSR-12

Page 345 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 2911.95 Rs 2911.95

Item Code: 9.134.1.2.2 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - Stainles steel hinges - Kiln seasoned Chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

MATERIALS: Hollock wood : Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 2505 2204 2504 9999

Hollock wood in planks Carraige of Timber Kiln seasoning of timber Chemical treatment Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

8737

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220 8218 8211 8214 0111 0112 0114 0130 9999

Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

cum cum cum L.S.

0.044 0.044 0.044 8.97

35000.00 100.11 680.00 1.49

1.41

760.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 3830.55

Add water charges @ 1% on

Add C.P & OH @15% on 3868.86 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2059.81 Rs 2059.80

Item Code: 9.134.2.2.3 P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 30 mm thick - Stainles steel - Kiln seasoned selected class of sesham wood.

Code

DSR-12

Description

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

Page 346 of 2298

MATERIALS: Kiln seasoned selected class of sesham wood. Styles 4x209x9.5x3cm = 0.023 cum+ Top Rail - 1x110.5x9.5x3cm = 0.003cum+ Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum. Total = 0.040 cum+ Add for wastage @ 10% = 0.004 cum. Total = 0.44 cum. Say 44 cudm 1200 2204 2504

Kiln seasoned selected sheesum wood planks Carraige of Timber Kiln seasoning of timber Wire guage - 2x160x40 cm = 1.28 sqm Add wastage @ 10% = 0.13 sqm Total = 1.41 sqm

8737

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220 8218 8211 8214 0111 0112 0114 0130 9999

Stainless steel screws 40 mm Stainless steel screws 20 mm LABOUR: Carpenter 1st class Carpenter 2nd class Beldar Mistry Sundries

Cum cum cum

0.044 0.044 0.044

65000.00 100.11 680.00

1.41

760.00

6.00

230.00

2.00

125.00

100 N 100 N

48.00 8.00

195.00 95.00

Day Day Day Day L.S.

1.20 0.80 1.00 0.10 33.80

301.00 273.00 247.00 301.00 1.49 Total: 5137.18

Add water charges @ 1% on

Add C.P & OH @15% on 5188.55 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2762.42 Rs 2762.45

Item Code: 9.135.1 P/F fly proof stainless steel grade 304 wire gauge to windows etc using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm - With 2nd class teak wood beading 62X19 mm.

Code

Description

Details of Cost for : 1.54 Sqm Unit Quantity

Rate

MATERIALS: Wire guage - 20x60mm mesh 3.2mm with 1.40 x 1.1 m = 1.54 sqm Add wastage @ 10% = 0.15 sqm Total = 1.69 sqm

8737 9999

DSR-12

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Carriage of wire guage L.S. Second class teak wood beading 5mx62mmx19mm = 0.0059 cum

1.69

760.00

1.82

1.49

Page 347 of 2298

1190 2204 0112 0114 9999

Add wastage @ 10% = 0.00059 cum Total = 0.00649 cum Say 6 cudm Second class teak wood in planks Carraige of Timber LABOUR: Carpenter 2nd class Beldar Sundries

cum cum

0.006 0.006

72000.00 100.11

Day Day L.S.

0.33 0.25 19.76

273.00 247.00 1.49 Total: 1900.99

Add water charges @ 1% on

Add C.P & OH @15% on 1920.00 Cost for 1.54 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1433.77 Rs 1433.75

Item Code: 9.135.2 P/F fly proof stainless steel grade 304 wire gauge to windows etc using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm - With 12 mm mild steel U beading.

Code

Description

Details of Cost for : 1.54 Sqm Unit Quantity

Rate

MATERIALS: Wire guage - 20x60mm mesh 3.2mm with 1.40 x 1.1 m = 1.54 sqm Add wastage @ 10% = 0.15 sqm Total = 1.69 sqm

8737 9999 7349 0112 0114 9999

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Carriage of wire guage L.S. 12 mm M.S. ‘U’ beading metre LABOUR: Carpenter 2nd class Day Beldar Day Sundries L.S.

1.69

760.00

1.82 5.00

1.49 14.00

0.33 0.25 19.76

273.00 247.00 1.49 Total: 1538.39

Add water charges @ 1% on

Add C.P & OH @15% on 1553.77 Cost for 1.54 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1160.29 Rs 1160.30

Item Code: 9.136 P/F fire resistant door frame of section 143 x 57 mm Code 8738 9999 9999

Description

Details of Cost for : 9.10 m Unit Quantity

MATERIALS: Factory made door frame fire rated ( 60 minutes) made with 16 SWG G.I. Sheet of section 14 Labour L.S. Sundries and carriage L.S.

9.10

0.00

130.00 4.23

1.49 1.49 Total: 200.00

Add water charges @ 1% on

DSR-12

Rate

Page 348 of 2298

Add C.P & OH @15% on 202.00 Cost for 9.10 m Rate per One Metre: Rate as per DSR-12:

Rs 25.53 Rs 1161.45

Item Code: 9.137 P/F 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet

Code 8739 9999 9999

Details of Cost for : 3.50 Sqm Unit Quantity

Description

MATERIALS: Fire rated door shuttere made with 16 SWG G.I. sheet( 60 Sqm minutes) without panel Labour L.S. Sundries and carriage L.S.

Rate

3.50

4850.00

180.00 10.00

1.49 1.49 Total: 17258.10

Add water charges @ 1% on

Add C.P & OH @15% on 17430.68 Cost for 3.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 5727.22 Rs 5727.20

Item Code: 9.138.1 P/F glazing in fire resistant door shuttersetc., with G.I. beading, fire resistant sealant -With clear fire resistant glass panes 6mm thick having minimum 60 minutes fire resistance.

Code

Details of Cost for : 6.36 Sqm Unit Quantity

Description

Rate

MATERIALS: Glazing area-2x0.70x2.05=2.87 m2 1x1.70x0.60=1.02 sqm 2x0.69x1.79=2.47 sqm Total =6.36 sqm 8741

8742 8740 8743 9999 9999

DSR-12

Clear fire resistant glass panes 6mm thick (60 minutes) G.1. 'U' beading 2x2x0.70=2.80 m 2x2x2.05=8.20 m 2x1x1.70=3.40 m 2x1x0.60=1.20 m 2x2x0.69 =2.76 m 2x2x1.79=7.16 m Total=25.52 m G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/sqm) with ceramic tape of suitabl Fire seal putty Matrix Mineral Board Labour Sundries and carriage

Sqm

6.36

19800.00

m

25.52

247.00

Kg m L.S. L.S.

3.00 76.56 180.00 10.00

Add water charges @ 1% on

675.00 61.85 1.49 1.49 Total: 139274.78

Add C.P & OH @15% on

140667.53

Page 349 of 2298

Cost for 6.36 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 25435.17 Rs 25435.15

Item Code: 9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch

Code 8744 0111 9999

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS: Panic Bar / latch (Double point) Labour for fixing Carpenter 1st class Sundries (screws and carriage)

Rate

Nos

1.00

5000.00

Day L.S.

0.17 3.64

301.00 1.49 Total: 5056.59

Add water charges @ 1% on

Add C.P & OH @15% on 5107.16 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 5873.23 Rs 5873.25

Item Code: 9.140.1 P/F plain lining with necessary screws/nuts & bolts/nails including a coat of primer on one face and fixed on wooden /steel frame work - 12mm thick commercial ply conforming to IS : 1328 BWR type

Code 2413 13.050.01 9999 0156 0114 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS: 12 mm commercial ply Priming coat: Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) Sundries and screws etc., LABOUR: Carpenter (average) Beldar Sundries and carriage

Rate

Sqm

11.00

580.00

Sqm

10.00

25.83

L.S.

40.10

1.49

Day Day L.S.

1.28 1.43 33.56

287.00 247.00 1.49 Total: 7210.32

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 7282.42 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 863.31 Rs 861.05

Item Code: 9.141 P/F PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (± 0.2 mm) made out of single piece extruded PVC profile including providing EPDM rubber gasket etc Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS: 8014 Factory made door frame of size 50x47mm with wall m 5.00 450.00 thickness 5 mm made of single piecs extr

DSR-12

Page 350 of 2298

0156 0115 9999

Carpenter (average) Coolie Sundries

Day Day L.S.

0.15 0.15 11.65

Add water charges @ 1% on

287.00 247.00 1.49 Total: 2347.46

Add C.P & OH @15% on 2370.93 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 545.31 Rs 544.50

Item Code: 9.142.1 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles - Non decorative finish (matt finish). Details of Cost for : 2.38 Sqm Code Description Unit Quantity Rate MATERIALS: 8735 35 mm thick factory made solid panel PVC door shutter of Sqm 2.38 2088.00 single piece extruded profile non 8100 Powder coated M.S. butt hinges 100mm X58mmX1.9mm 10 No 4.00 79.00 0637 Bright finished or black enameled mild steel screws 40 mm 100 N 48.00 50.00 0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0156 0114 9999

Carpenter (average) Beldar Sundries

Day Day L.S.

8.00

25.00

0.40 0.40 30.35

287.00 247.00 1.49 Total: 5285.86

Add water charges @ 1% on

Add C.P & OH @15% on 5338.72 Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2579.63 Rs 2579.65

Item Code: 9.142.2 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles - decorative finish (wood grained finish). Details of Cost for : 2.38 Sqm Code Description Unit Quantity Rate MATERIALS: 8736 35 mm thick factory made solid panel PVC door shutter of Sqm 2.38 2536.00 single piece extruded profile dec 8100 Powder coated M.S. butt hinges 100mm X58mmX1.9mm 10 No 4.00 79.00 0637 Bright finished or black enameled mild steel screws 40 mm 100 N 48.00 50.00 0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0156 0114 9999

Carpenter (average) Beldar Sundries

Day Day L.S.

8.00

25.00

0.40 0.40 30.35

287.00 247.00 1.49 Total: 6352.10

Add water charges @ 1% on

Add C.P & OH @15% on 6415.62 Cost for 2.38 Sqm

DSR-12

Page 351 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 3099.98 Rs 3100.00

Item Code: 9.143 Providing and Fixing factory made uPVC door frame made of uPVC exturded sections , of size 65 mm x 55 mm .. ..

Code 8745

0156 0114 9999

Details of Cost for : 5.00 m Unit Quantity

Description MATERIALS: 65mm x 55mm x 2mm thick Factory made door frame of PVC extruded section in white,grey or w LABOUR: Carpenter (average) Beldar Sundries

Rate

m

5.00

318.00

Day Day L.S.

0.15 0.15 4.68

287.00 247.00 1.49 Total: 1677.07

Add water charges @ 1% on

Add C.P & OH @15% on 1693.84 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 389.58 Rs 389.60

Item Code: 9.144 Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mm x 37mm with wall thickness 2 mm ( ± 0.2mm) .. Details of Cost for : 2.38 Sqm Code Description Unit Quantity Rate MATERIALS: 8746 37 mm thick Factory made shutter with style,rails and panels Sqm 2.38 #REF! of PVC extruded section in wh LABOUR: 0156 Carpenter (average) Day 0.40 287.00 0114 Beldar Day 0.40 247.00 9999 Sundries L.S. 20.36 1.49 Total: Add water charges @ 1% on #REF! Add C.P & OH @15% on #REF! Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

#REF! Rs 2703.40

Item Code: 9.145 Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mm x 53 mm, having wall thickness 2.0mm (± 0.2mm) .. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS: 8747 75mm x 53mm x 2.0mm thick Factory made door frame of m 5.00 #REF! PVC extruded section in white,grey or LABOUR: 0156 Carpenter (average) Day 0.15 287.00 0114 Beldar Day 0.15 247.00

DSR-12

Page 352 of 2298

9999

Sundries

L.S.

4.68

Add water charges @ 1% on

1.49 Total: #REF!

Add C.P & OH @15% on #REF! Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

#REF! Rs 400.05

Item Code: 9.146 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness 2 mm (± 0.2mm) ..

Code 8748

0156 0115 9999

Description

Details of Cost for : 2.38 Sqm Unit Quantity

MATERIALS: 37 mm thick Factory made fusion welded shutter with Sqm style,rails and panels of PVC extruded LABOUR: Carpenter (average) Day Coolie Day Sundries L.S.

Rate

2.38

#REF!

0.40 0.40 20.36

287.00 247.00 1.49 Total: #REF!

Add water charges @ 1% on

Add C.P & OH @15% on #REF! Cost for 2.38 Sqm Rate per One Sqm: Rate as per DSR-12:

#REF! Rs 2790.50

Item Code: 9.147.1.1 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement Window with hinge System - Sash (62 mm x 34 mm) Details of Cost for : 1.00 m Code Description Unit Quantity Rate MATERIALS: 8760 uPVC extruded profile casement window Frame (50 mm x 50 m 1.05 #REF! mm) Qty = 1.00 + wastage @ 5% = 1.05 m 8775 Steel Galvanised tubular reinforcement for uPVC door/ m 1.05 50.00 window Qty = 1.00 + Wastage @ 5% = 1.05 m 7390 Neoprene/EPDM rubber gasket metre 1.05 25.00 Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication 0111 Carpenter 1st class Day 0.10 301.00 0114 Beldar Day 0.10 247.00 9999 Sundries and carriage of material L.S. 5.00 1.49 9999 Labour for installation, drilling holes, hire charges drill, L.S. 10.00 1.49 electricity charges, cost of Total: Add water charges @ 1% on #REF! Add C.P & OH @15% on #REF! Cost for 1.00 m

DSR-12

Page 353 of 2298

Rate per One Metre: Rate as per DSR-12:

#REF! Rs 373.75

Item Code: 9.147.1.2 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement Window with hinge System - Frame (50 mm x 50mm) Details of Cost for : 1.00 m Code Description Unit Quantity Rate MATERIALS: 8761 uPVC extruded profile casement window sash (Style and Rail) m 1.05 #REF! (62 mm x 34 mm) Qty = 1.00 + wastage @ 5% = 1.05 m 8775 Steel Galvanised tubular reinforcement for uPVC door/ m 1.05 50.00 window Qty = 1.00 + Wastage @ 5% = 1.05 m 7390 Neoprene/EPDM rubber gasket metre 1.05 25.00 Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication 0111 Carpenter 1st class Day 0.10 301.00 0114 Beldar Day 0.10 247.00 9999 Sundries and carriage of material L.S. 5.00 1.49 9999 Labour for installation, drilling holes, hire charges drill, L.S. 10.00 1.49 electricity charges, cost of Total: Add water charges @ 1% on #REF! Add C.P & OH @15% on #REF! Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

#REF! Rs 357.90

Item Code: 9.147.1.3 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement Window with hinge System - Mullion (66mm x 50 mm) Details of Cost for : 1.00 m Code Description Unit Quantity Rate MATERIALS: 8762 uPVC extruded profile casement window mullion m 1.05 #REF! (intermediate section) (66mm x 50 mm) Qty = 1.00 + wastage @ 5% = 1.05 m 8775 Steel Galvanised tubular reinforcement for uPVC door/ m 1.05 50.00 window Qty = 1.00 + Wastage @ 5% = 1.05 m 7390 Neoprene/EPDM rubber gasket metre 1.05 25.00 Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication 0111 Carpenter 1st class Day 0.10 301.00 0114 Beldar Day 0.10 247.00 9999 Sundries and carriage of material L.S. 5.00 1.49 9999 Labour for installation, drilling holes, hire charges drill, L.S. 10.00 1.49 electricity charges, cost of Total: Add water charges @ 1% on #REF!

DSR-12

Page 354 of 2298

Add C.P & OH @15% on #REF! Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

#REF! Rs 394.50

Item Code: 9.147.1.4 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement Window with hinge System -T' Profile (one vertical length in between two shutters) (24mm x 34.5mm)

Code 8763

0111 0114 9999 9999

Description

Details of Cost for : 1.00 m Unit Quantity

MATERIALS: uPVC extruded profile casement window 'T' profile (one m vertical length in between two shut Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication Carpenter 1st class Day Beldar Day Sundries and carriage of material L.S. Labour for installation, drilling holes, hire charges drill, L.S. electricity charges, cost of

Rate

1.05

#REF!

0.02 0.02 3.00 5.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: #REF!

Add C.P & OH @15% on #REF! Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

#REF! Rs 82.70

Item Code: 9.147.1.5 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement Window with hinge System - Glazing bead (12mm x 18mm) Details of Cost for : 1.00 m Code Description Unit Quantity Rate MATERIALS: 8764 uPVC extruded profile casement window glazing bead (12 mm m 1.05 #REF! x 18 mm) Qty = 1.00 + wastage @ 5% = 1.05 m 7390 Neoprene/EPDM rubber gasket metre 1.05 25.00 Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication 0111 Carpenter 1st class Day 0.02 301.00 0114 Beldar Day 0.02 247.00 9999 Sundries and carriage of material L.S. 3.00 1.49 9999 Labour for installation, drilling holes, hire charges drill, L.S. 5.00 1.49 electricity charges, cost of Total: Add water charges @ 1% on #REF! Add C.P & OH @15% on #REF! Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

#REF! Rs 113.15

Page 355 of 2298

Item Code: 9.147.2.1 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement Window (With friction hinge & outward opening) - Casement Frame (67mm x 62mm)

Code 8765

8775

0111 0114 9999 9999

Details of Cost for : 1.00 m Unit Quantity

Description MATERIALS: uPVC extruded profile casement window Frame ( 67 mm x 62 mm) Qty = 1.00 + wastage @ 5% = 1.05 m Steel Galvanised tubular reinforcement for uPVC door/ window Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication Carpenter 1st class Beldar Sundries and carriage of material Labour for installation, drilling holes, hire charges drill, electricity charges, cost of

Rate

m

1.05

#REF!

m

1.05

50.00

0.10 0.10 5.00 10.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: #REF!

Day Day L.S. L.S.

Add C.P & OH @15% on #REF! Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

#REF! Rs 425.00

Item Code: 9.147.2.2 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement Window (With friction hinge & outward opening) - Casement Window Sash/Mullion (67mm x 75mm ) (style, rail and intermediate section

Code 8766

8775

0111 0114 9999 9999

Details of Cost for : 1.00 m Unit Quantity

Description MATERIALS: uPVC extruded profile casement Window Sash/Mullion ( 67 mm x 75 mm)(Style,rail and interme Qty = 1.00 + wastage @ 5% = 1.05 m Steel Galvanised tubular reinforcement for uPVC door/ window Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication Carpenter 1st class Beldar Sundries and carriage of material Labour for installation, drilling holes, hire charges drill, electricity charges, cost of

Rate

m

1.05

250.00

m

1.05

50.00

0.10 0.10 5.00 10.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: 392.15

Day Day L.S. L.S.

Add C.P & OH @15% on 396.07 Cost for 1.00 m Rate per One Metre:

DSR-12

Rs 455.48

Page 356 of 2298

Rate as per DSR-12:

Rs 455.50

Item Code: 9.147.2.3 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement Glazing bead (35mm x 18 mm) Details of Cost for : 1.00 m Code Description Unit Quantity Rate MATERIALS: 8767 uPVC extruded profile casement window glazing bead (35 mm m 1.05 78.00 x 18 mm) Qty = 1.00 + wastage @ 5% = 1.05 m 7390 Neoprene/EPDM rubber gasket metre 1.05 25.00 Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication 0111 Carpenter 1st class Day 0.02 301.00 0114 Beldar Day 0.02 247.00 9999 Sundries and carriage of material L.S. 3.00 1.49 9999 Labour for installation, drilling holes, hire charges drill, L.S. 5.00 1.49 electricity charges, cost of Total: Add water charges @ 1% on 131.03 Add C.P & OH @15% on 132.34 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 152.19 Rs 152.20

Item Code: 9.147.3.1 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Window (Two Track, 2/4 Shutters) - Two Track Sliding Frame (67mm x 52mm)

Code 8768

8775

8772

0111 0114 9999 9999

Details of Cost for : 1.00 m Unit Quantity

Description MATERIALS: uPVC extruded profile Two Track Sliding frame (67 mm x 52 mm) Qty = 1.00 + wastage @ 5% = 1.05 m Steel Galvanised tubular reinforcement for uPVC door/ window Qty = 1.00 + Wastage @ 5% = 1.05 m Aluminium Track on bottom rail for uPVC window Qty = 2.00 + wastage @ 5% = 2.10 m LABOUR: For fabrication Carpenter 1st class Beldar Sundries and carriage of material Labour for installation, drilling holes, hire charges drill, electricity charges, cost of

Rate

m

1.05

235.00

m

1.05

50.00

m

2.10

20.00

0.10 0.10 5.00 15.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: 425.85

Day Day L.S. L.S.

Add C.P & OH @15% on 430.11 Cost for 1.00 m Rate per One Metre:

DSR-12

Rs 494.63

Page 357 of 2298

Rate as per DSR-12:

Rs 494.60

Item Code: 9.147.3.2 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Window (Two Track, 2/4 Shutters) - Sliding window Sash (60mm x 44mm)

Code 8769

8775

8773

0111 0114 9999 9999

Details of Cost for : 1.00 m Unit Quantity

Description

MATERIALS: uPVC extruded profile Sliding window Sash (60 mm x 44 mm) m

Rate

1.05

212.00

m

1.05

50.00

m

2.10

15.00

0.10 0.10 5.00 15.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: 391.20

Qty = 1.00 + wastage @ 5% = 1.05 m Steel Galvanised tubular reinforcement for uPVC door/ window Qty = 1.00 + Wastage @ 5% = 1.05 m Wool Pine for uPVC window Qty = 2.00 + wastage @ 5% = 2.10 m LABOUR: For fabrication Carpenter 1st class Beldar Sundries and carriage of material Labour for installation, drilling holes, hire charges drill, electricity charges, cost of

Day Day L.S. L.S.

Add C.P & OH @15% on 395.11 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 454.38 Rs 454.40

Item Code: 9.147.3.3 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Window (Two Track, 2/4 Shutters) - Sliding Interlock for Window (one vertical length in each shutter)( 45.5 mm x 28 mm)

Code 8770

8773

0111 0114 9999 9999

Description

Details of Cost for : 1.00 m Unit Quantity

MATERIALS: uPVC extruded profile Sliding Interlock for Window (one m vertical length in each shutter) ( Qty = 1.00 + wastage @ 5% = 1.05 m Wool Pine for uPVC window m Qty = 1.00 + Wastage @ 5% = 1.05 m LABOUR: For fabrication Carpenter 1st class Day Beldar Day Sundries and carriage of material L.S. Labour for installation, drilling holes, hire charges drill, L.S. electricity charges, cost of

Rate

1.05

45.00

1.05

15.00

0.05 0.05 3.00 5.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: 102.32

Add C.P & OH @15% on 103.34 Cost for 1.00 m

DSR-12

Page 358 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 118.84 Rs 118.85

Item Code: 9.147.3.4 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Window (Two Track, 2/4 Shutters) - Sliding Glazing bead (35 mm x 18 mm)

Code 8767

7390

0111 0114 9999 9999

Details of Cost for : 1.00 m Unit Quantity

Description MATERIALS: uPVC extruded profile casement window glazing bead (35 mm x 18 mm) Qty = 1.00 + wastage @ 5% = 1.05 m Neoprene/EPDM rubber gasket Qty = 1.00 + Wastage @ 5% = 1.05 m LABOUR: For fabrication Carpenter 1st class Beldar Sundries and carriage of material Labour for installation, drilling holes, hire charges drill, electricity charges, cost of

Rate

m

1.05

78.00

metre

1.05

25.00

Day Day L.S. L.S.

0.02 0.02 3.00 5.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: 131.03

Add C.P & OH @15% on 132.34 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 152.19 Rs 152.20

Item Code: 9.147.4.1 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Door (Two Track, 2/4 Shutters) - Two Track Sliding Frame (67mm x 52mm)

Code 8768

8775

8772

0111 0114 9999 9999

Details of Cost for : 1.00 m Unit Quantity

Description MATERIALS: uPVC extruded profile Two Track Sliding frame (67 mm x 52 mm) Qty = 1.00 + wastage @ 5% = 1.05 m Steel Galvanised tubular reinforcement for uPVC door/ window Qty = 1.00 + Wastage @ 5% = 1.05 m Aluminium Track on bottom rail for uPVC window Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication Carpenter 1st class Beldar Sundries and carriage of material Labour for installation, drilling holes, hire charges drill, electricity charges, cost of

Rate

m

1.05

235.00

m

1.05

50.00

m

1.05

20.00

0.10 0.10 10.00 15.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: 412.30

Day Day L.S. L.S.

Add C.P & OH @15% on 416.42 Cost for 1.00 m

DSR-12

Page 359 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 478.88 Rs 478.90

Item Code: 9.147.4.2 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Door (Two Track, 2/4 Shutters) - Sliding Door Sash (80mm x 44mm)

Code 8771

8775

8773 7390

0111 0114 9999 9999

Details of Cost for : 1.00 m Unit Quantity

Description MATERIALS: uPVC extruded profile Sliding Door Sash (80 mm x 44 mm)

Rate

m

1.05

275.00

m

1.05

50.00

m

2.10

15.00

metre

1.05

25.00

0.14 0.14 5.00 15.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: 505.52

Qty = 1.00 + wastage @ 5% = 1.05 m Steel Galvanised tubular reinforcement for uPVC door/ window Qty = 1.00 + Wastage @ 5% = 1.05 m Wool Pine for uPVC window Qty = 2.00 + Wastage @ 5% = 2.10 m Neoprene/EPDM rubber gasket Qty = 1.00 + wastage @ 5% = 1.05 m LABOUR: For fabrication Carpenter 1st class Beldar Sundries and carriage of material Labour for installation, drilling holes, hire charges drill, electricity charges, cost of

Day Day L.S. L.S.

Add C.P & OH @15% on 510.58 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 587.17 Rs 587.15

Item Code: 9.147.4.3 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Door (Two Track, 2/4 Shutters) -Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm)

Code 8770

8773

0111 0114 9999 9999

DSR-12

Description

Details of Cost for : 1.00 m Unit Quantity

MATERIALS: uPVC extruded profile Sliding Interlock for Window (one m vertical length in each shutter) ( Qty = 1.00 + wastage @ 5% = 1.05 m Wool Pine for uPVC window m Qty = 1.00 + Wastage @ 5% = 1.05 m LABOUR: For fabrication Carpenter 1st class Day Beldar Day Sundries and carriage of material L.S. Labour for installation, drilling holes, hire charges drill, L.S. electricity charges, cost of

Rate

1.05

45.00

1.05

15.00

0.05 0.05 3.00 5.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: 102.32

Page 360 of 2298

Add C.P & OH @15% on 103.34 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 118.84 Rs 118.85

Item Code: 9.147.4.4 Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Door (Two Track, 2/4 Shutters) -Sliding Glazing bead (35 mm x 18 mm)

Code 8767

7390

0111 0114 9999 9999

Details of Cost for : 1.00 m Unit Quantity

Description MATERIALS: uPVC extruded profile casement window glazing bead (35 mm x 18 mm) Qty = 1.00 + wastage @ 5% = 1.05 m Neoprene/EPDM rubber gasket Qty = 1.00 + Wastage @ 5% = 1.05 m LABOUR: For fabrication Carpenter 1st class Beldar Sundries and carriage of material Labour for installation, drilling holes, hire charges drill, electricity charges, cost of

Rate

m

1.05

78.00

metre

1.05

25.00

Day Day L.S. L.S.

0.02 0.02 3.00 5.00

301.00 247.00 1.49 1.49

Add water charges @ 1% on

Total: 131.03

Add C.P & OH @15% on 132.34 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 152.19 Rs 152.20

Item Code: 9.148.1 P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc. 200X19X1.9MM Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate MATERIALS: 8755 Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for Nos 10.00 225.00 uPVC windows 8647 Stainless steal screws 30mm x4mm. cent 0.40 29.00 9999 Carriage L.S. 2.73 1.49 0112 Carpenter 2nd class Day 0.14 273.00 0114 Beldar Day 0.14 247.00 Total: Add water charges @ 1% on 2338.47 Add C.P & OH @15% on 2361.85 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 271.61 Rs 271.60

Item Code: 9.148.2

DSR-12

Page 361 of 2298

P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc. 250X19X1.9mm Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate MATERIALS: 8756 Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for Nos 10.00 275.00 uPVC windows 8647 Stainless steal screws 30mm x4mm. cent 0.40 29.00 9999 Carriage L.S. 2.73 1.49 0112 Carpenter 2nd class Day 0.14 273.00 0114 Beldar Day 0.14 247.00 Total: Add water charges @ 1% on 2838.47 Add C.P & OH @15% on 2866.85 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 329.69 Rs 329.70

Item Code: 9.148.3 P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc. 300X19X1.9mm Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate MATERIALS: 8757 Stainless steel friction hinge of size 300 mm x 19 x 1.9 mm for Nos 10.00 350.00 uPVC windows 8647 Stainless steal screws 30mm x4mm. cent 0.40 29.00 9999 Carriage L.S. 2.73 1.49 0112 Carpenter 2nd class Day 0.14 273.00 0114 Beldar Day 0.14 247.00 Total: Add water charges @ 1% on 3588.47 Add C.P & OH @15% on 3624.35 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 416.80 Rs 416.80

Item Code: 9.148.4 P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc. -350 mm x 19 x 1.9 mm Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate MATERIALS: 8758 Stainless steel friction hinge of size 350 mm x 19 x 1.9 mm for Nos 10.00 400.00 uPVC windows 8647 Stainless steal screws 30mm x4mm. cent 0.40 29.00 9999 Carriage L.S. 2.73 1.49 0112 Carpenter 2nd class Day 0.14 273.00 0114 Beldar Day 0.14 247.00 Total: Add water charges @ 1% on 4088.47 Add C.P & OH @15% on 4129.35 Cost for 10.00 Nos

DSR-12

Page 362 of 2298

Rate per Each: Rate as per DSR-12:

Rs 474.88 Rs 474.90

Item Code: 9.148.5 P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc. -400 mm x 19 x 1.9mm Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate MATERIALS: 8759 Stainless steel friction hinge of size 400 mm x 19 x 1.9 mm for Nos 10.00 500.00 uPVC windows 8647 Stainless steal screws 30mm x4mm. cent 0.40 29.00 9999 Carriage L.S. 2.73 1.49 0112 Carpenter 2nd class Day 0.14 273.00 0114 Beldar Day 0.14 247.00 Total: Add water charges @ 1% on 5088.47 Add C.P & OH @15% on 5139.35 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 591.03 Rs 591.05

Item Code: 9.149 Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate MATERIALS: 8750 Zinc alloy (white powder coated) casement handle for uPVC Nos 10.00 150.00 windows 9999 Carriage L.S. 4.42 1.49 9999 Sundries (screws) L.S. 3.00 1.49 LABOUR: 0156 Carpenter (average) Day 0.125 287.00 Total: Add water charges @ 1% on 1546.94 Add C.P & OH @15% on 1562.41 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 179.68 Rs 179.70

Item Code: 9.150 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc.

Code 8751 9999 9999

DSR-12

Description

Details of Cost for : 10.00 Nos Unit Quantity

MATERIALS: Zinc alloy (white powder coated) Touch Lock for uPVC Nos windows Carriage L.S. Sundries (Screws) L.S. LABOUR:

Rate

10.00

100.00

4.42 3.00

1.49 1.49

Page 363 of 2298

0156

Carpenter (average)

Day

0.125

Add water charges @ 1% on

287.00 Total: 1046.94

Add C.P & OH @15% on 1057.41 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 121.60 Rs 121.60

Item Code: 9.151 Providing and fixing steel roller for uPVC sliding window with necessary screws etc Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS: 8752 Zinc alloy rollers for uPVC windows Nos 10.00 9999 Carriage L.S. 4.42 9999 Sundries (screws) L.S. 3.00 LABOUR: 0156 Carpenter (average) Day 0.125 Add water charges @ 1% on

Rate 50.00 1.49 1.49 287.00 Total: 546.94

Add C.P & OH @15% on 552.41 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 63.53 Rs 63.55

Item Code: 9.152 Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS: 8753 Zinc alloy rollers for uPVC door Nos 10.00 9999 Carriage L.S. 4.42 9999 Sundries (screws) L.S. 3.00 LABOUR: 0156 Carpenter (average) Day 0.125 Add water charges @ 1% on

Rate 80.00 1.49 1.49 287.00 Total: 846.94

Add C.P & OH @15% on 855.41 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 98.37 Rs 98.35

Item Code: 9.153 Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete.

Code 8754 9999

DSR-12

Description

Details of Cost for : 10.00 Nos Unit Quantity

MATERIALS: Zinc alloy (white powder coated) casement lock for uPVC Nos windows Carriage L.S.

Rate

10.00

100.00

4.42

1.49

Page 364 of 2298

9999 0156

Sundries (screws) LABOUR: Carpenter (average)

L.S.

3.00

1.49

Day

0.125

287.00 Total: 1046.94

Add water charges @ 1% on

Add C.P & OH @15% on 1057.41 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 121.60 Rs 121.60

Item Code: 9.154 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling in grid pattern .. Details of Cost for : 58.35 Kg Code Description Unit Quantity Rate Details of Cost for 2.4x2.4m panel = 5.76 sqm or 58.35 kg MATERIALS: M.S Pipe section @ 10.13 kg/sqm = 58.35 kg + Wastage @ 5% = 2.92 kg Total = 61.27 kg 4009 Mild steel tubes hot finished welded type kilog 61.27 48.00 8776 Stainless steel dash fastener of 8 mm dia and 75 mm long bolt Nos 20.00 20.00

13.050.03

0116 0103 0114 0100 9999

Steel Primer 5x2x2.40x0.05x4 =4.80 sqm Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise LABOUR: Fitter (grade 1) Day Blacksmith 2nd class Day Beldar Day Bandhani Day Sundries L.S.

4.80

20.72

0.40 0.53 1.23 0.06 33.56

301.00 273.00 247.00 260.00 1.49 Total: 3975.46

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 4015.21 Cost for 58.35 Kg Rate per One Kg: Rate as per DSR-12:

Rs 80.84 Rs 80.85

Item Code: 10.1 Structural steel work in single section fixed with or without connecting plate including applying a priming primer. ... Details of Cost for : 100.00 Kg Code Description Unit Quantity MATERIALS Steel = 1.00q Add wastage @ 5% = 0.05q = 1.05q 1007 Steel quint 1.05 2205 Carriage tonne 0.105 LABOUR: 0116 Fitter (Grade I) Day 0.50 0103 Blacksmith 2nd class Day 0.75 0114 Beldar Day 1.00

DSR-12

coat of approved steel

Rate

4250.00 77.87 301.00 273.00 247.00

Page 365 of 2298

13.050.03 9999

Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Sundries L.S.

3.00

20.72

20.67

1.49 Total: 5103.73

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 5154.77 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 59.90 Rs 59.90

Item Code: 10.2 Structural steel work riveted, bolted or welded in builtup sections, trusses etc ..and applying a priming coat steel primer ..

Code

1007

1009

1010

DSR-12

Description MATERIALS(i) Principal rafter (T-iron) 100x 100x 10mm @ 15kg/m = 142.50Kg+ Struts (angles)40x40x6mm 2xl.35=2.70m @ 3.5kg/m = 9.45kg = 15l.95kg+ Add wastage @ 5% = 7.60kg = 159.55kg. = 1.60q Principal rafter (T-iron) (ii) Ties (flats) 50x12mm 2x2.7 = 5.4m @4.7kg/m = 25.38kg+ Ties central (flats) 50x10mm 1x2.80 = 2.8m @3.90kg/m = 10.92kg.+ Braces (flats)40x 10mm 2x1.84 = 3.68m @3.9kg/m = 14.35kg. = 50.65kg+ Add wastage @ 5% = 2.53kg. = 53.18kg. =0.53q Ties (flats) 50x12mm (iii) Gusset plates 10mm thick 1x0.74x0.35m = 0.259sqm.+ shoe 4x0.46x0.46 = 0.845sqm. = 1.104 sqm. 1.104sqm.@ 78.4kg/m = 86.55kg. 12mm plates at the point of principal rafter and strut2x0.3x0.2 = 0.12sqm.+ Tie beam, brace and strut2x0.5x0.3 = 0.30sqm.+ Sole plates2x0.46x0.46 = 0.42sqm.+ Anchor plate2x0.46x0.1 =0.09sqm. = 0.93 sqm. Say 1.00 sqm. 1.00 sqm. @ 94.4kg/m = 94.40kg. = 180.95kg. Add wastage @ 5% = 9.05kg. = 190.00kg or 1.90q Gusset plates 10mm thick (iv) 16mm dia. 50mm long rivets = 56 nos.+ Add wastage @ 5 % = 2.8 nos.

Details of Cost for : 395.00 Kg Unit Quantity

Rate

quint

1.60

4250.00

quint

0.53

4150.00

quint

1.90

4500.00

Page 366 of 2298

1020

1221 2205

0116 0103 0139 0114 0100

13.050.03 9999

= 58.8 nos. 16mm dia. 50mm long rivets quint (v) 20mm dia. holding down bolts 4 Nos.x460mm = 1840mm + Add wastage @ 5% = 92mm = 1932 mm 20mm dia. Holding down bolts quint Carriage of tonne steel-(0.160+0.053+0.091 +0.099+0.007+0.005) =0.415 tonne LABOURFitter (Grade I) Day Blacksmith 2nd class Day Beldar (Special) Day Beldar Day Bandhani Day Applying priming coatT.Iron 9.5x0.4 = 3.80sqm.+ Struts 2.70x0.16 = 0.43sqm.+ Ties 5.4x0.124 = 0.67sqm.+ Braces 2x 1.84x0.12 = 0.44 sqm.+ Ties 2.8x0.12 = 0.34 sqm. = 5.68 sqm. Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Sundries L.S.

0.0684

4800.00

0.0529 0.415

5400.00 77.87

2.70 3.60 5.40 3.60 0.44

301.00 273.00 260.00 247.00 260.00

5.68

20.72

80.73

1.49 Total: 22519.19

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 22744.38 Cost for 395.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 66.52 Rs 66.50

Item Code: 10.3 P/F in position collapsible steel shutters - vertical channels 20x10x2mm -braced with flat iron diagonals 20x5mm - etc

Code

1007

1007

DSR-12

Description Details of cost for a gate 2.4mxl.5m = 3.6sqm. MATERIALSM.S. channels 18 Nos. on both sides 20xl0x2mm @ 0.56kg/m 2x18x2.4 = 86.40m+ Add wastage @ 10% = 8.64m = 95.04m [email protected]/m =53.22kg=0.53q M.S. Tee-40x40x6mm for bottom-1.5 70m+ for top = 1.725m =3.295m Say 3.3m 3.3m @ 3.5kg/m = 11.55kg+ Add wastage @ 10% = 1.155 Kg. = 12.705Kg. SayO.I3q M.S. Tee 20mmx5mm flat iron diagonals 4 Nos. 4x32x0.5334 = 68.275m

Details of Cost for : 3.60 Sqm Unit Quantity

Rate

quint

0.53

4250.00

quint

0.13

4250.00

Page 367 of 2298

1008 2205 9999 9999 4013

13.050.03

0116 0102 0103 0123 0124 0114 9999

68.275m @ 0.8kg/m = 54.62kg+ Add wastage @ 10% = 5.46kg = 60.08kg = 0.60q Flat iron diagonals quint Carriage-(0.053+0.013+0.060=0.126 tonne) tonne Cost of rivets fixing hooks and washers L.S. Cost of locking arrangements and handles L.S. Pulleys 40mm dia. each Priming coatChannel - 36x0.076x2.4 = 6.57sqm.+ Tee-0.16x3.3=0.53sqm.+ Flats-0.05x68 = 3.40sqm. = 10.50sqm. Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise LABOURFitter (Grade I) Day Blacksmith 1st class Day Blacksmith 2nd class Day Mason 1st class Day Mason 2nd class Day Beldar Day Sundries L.S.

0.60 0.126 269.10 67.34 10.00

4200.00 77.87 1.49 1.49 25.00

10.50

20.72

3.00 6.00 6.00 0.50 0.50 8.00 161.46

301.00 301.00 273.00 301.00 273.00 247.00 1.49 Total: 12936.69

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 13066.06 Cost for 3.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 4234.31 Rs 4234.25

Item Code: 10.4 P/F 1mm thick MS sheet sliding-shutters -frame and diagonal braces of 40x40x6mm angle iron, 3mm MS gusset plates, 25mm dia pulley, .. .. Details of Cost for : 5.76 Sqm Code Description Unit Quantity Rate MATERIALS(i) M.S. sheet lmm thick 5.76sqm. @ 7.85kg/sqm. = 45.2I6kg.+ Add wastage @ 10% = 4.522kg. = 49.738kg = 0.497 q 1013 M.S. Sheet 2x5.76= 11.52+ quint 0.497 4600.00 (ii) Gusset plates 3.00mm thick Area of one gusset plates 0.3x0.04 = 0.0120+ 1/2x0.26(0.04+0.3) = 0.0442 = 0.0562sqm.+ 8x0.0562 = 0.4496sqm.+ 2x22/7x1/4x0.3x0.3=0.1414sqm. = 0.5910sqm. [email protected]/sqm.= 13.92kg.+ Add wastage @ 10% = 1.39kg - 15.31kg. or 0.153q 1010 Gusset plates quint 0.153 4500.00 (iii) Angle iron 40x40x6mm @ 3.5kg/m Sides-4x2.4=9.6m+ Bottom & top 4xi.2 = 4.8m+ Diagonals-2x2.5=5.0m+

DSR-12

Page 368 of 2298

1007

1007 2205 9999 0969 9999 9999 9999

13.050.03

0116 0102 0103 0114 0123 0124 9999

2x2.45 = 4.9m+ Top and bottom guides 2x4.8 = 9.6m Top guide supports 7x0.8 = 2.1m = 36.0m 36m @3.5kg. per m. = 126kg.+ Add wastage® 10%= 12.6kg. = 138.6kg. or 1.39q Angle iron quint (iv)Channel 25x25x6mm @ 3.05kg/m Bottom-2.4m : 2.4x3.05 Channel 40x40x6mm @ 5.56kg/m 0.5x5.56 = 2.78kg. = 10.1kg.+ Add wastage @ 10% = 1.101 kg. = 11.11kg. or 0.11q Channel quint Carriage-(0.0497+0.015+0.139+0.11 =0.2157 tonne) tonne (v) Pully guide blocks including drilling holes L.S. (vi) 25mm dia. Pully each (vii) Handles and locking arrangements L.S. (viii) Bolts and rivets L.S. (ix)Cement concrete L.S. Priming coatM.S. Sheet 2x5.76 = 11.52+ Angle iron 0.16x36 = 5.76+ Channel-0.15x2.4=0.36+ 0.24x0.5=0.12 = 17.76 Say 18.0sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise LABOURFitter (Grade 1) Day Blacksmith 1st class Day Blacksmith 2nd class Day Beldar Day Mason 1st class Day Mason 2nd class Day Sundries L.S.

1.39

4250.00

0.11 0.216 269.10 8.00 167.75 269.10 13.52

4250.00 77.87 1.49 30.00 1.49 1.49 1.49

18.00

20.72

2.00 3.00 4.00 4.00 0.06 0.06 161.46

301.00 301.00 273.00 247.00 301.00 273.00 1.49 Total: 14538.55

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 14683.94 Cost for 5.76 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2996.44 Rs 2996.40

Item Code: 10.5.1 P/F 1mm thick MS sheet door with frame of 40x40x6mm angle iron and 3mm MS gusset plates .. ..Using MS angels 40x40x6mm for diagonal braces. Details of Cost for : 5.76 Sqm Code Description Unit Quantity Rate MATERIALS(i) M.S. sheet lmm thick 5.76sqm. @ 7.85kg/sqm. = 45.216kg.+ Add wastage @ 10% = 4.522kg. = 49.738kg = 0.497 q

DSR-12

Page 369 of 2298

1013

1013

1007 2205 1036 1222 1019 9999 9999

13.050.03

0116 0102 0103 0123 0124 0114 9999

M.S. Sheet 2x5.76= 11.52+ quint (ii) Gusset plates 3.00mm thick Area of one gusset plates 0.3x0.04 = 0.0120+ 1/2x0.26(0.04+0.3) = 0.0442 = 0.0562sqm.+ 8x0.0562 = 0.4496sqm.+ 2x22/7xl/4x0.3x0.3=0.1414sqm. = 0.5910sqm. [email protected]/sqm.= l3.92kg.+ Add wastage @ 10% = 1.39kg = 15.31kg. or 0.153q Gusset plates quint (iii) Angle iron:40x40x6mm @3.5kg/m Sides-4x2.40 = 9.6m+ Top & bottom-4xl.20=4.8m+ Diagonals-2x2.5=5.0m+ 2x2.45 = 4.9m+ = 24.30m+ Add wastage @ 10% = 2.43m =26.73m 26.73m @ 3.5kg. per m. = 93.56kg=0.936q Angle iron quint Carriage-(0.0497+0.0153+0.0936 tonne) = tonne 0.1586 t (iv) Pintles including welded pin each M.S. cleats with bolts an nuts to rest on pintles each Hooks each Locking arrangements and handles L.S. Rivets L.S. Priming coatM.S. sheet = 11.52 Angle iron-0.16x24.3 = 3.89 Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise LABOURFitter (Grade I) Day Blacksmith 1st class Day Blacksmith 2nd class Day Mason 1st Class Day Mason 2nd class Day Beldar Day Sundries L.S.

0.497

4600.00

0.153

4600.00

0.936 0.1586

4250.00 77.87

4.00 4.00 2.00 167.70 269.10

35.00 110.00 30.00 1.49 1.49

15.41

20.72

2.00 3.00 4.00 0.06 0.06 5.00 161.46

301.00 301.00 273.00 301.00 273.00 247.00 1.49 Total: 12378.20

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 12501.98 Cost for 5.76 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2551.49 Rs 2551.45

Item Code: 10.5.2 P/F 1mm thick MS sheet door - 40x40x6mm angle frame - Using flats 30x6mm for diagonal braces and central cross piece

Code

Description

Details of Cost for : 5.76 Sqm Unit Quantity

Rate

MATERIALS(i) M.S. sheet lmm thick 5.76sqm. @ 7.85kg/sqm. = 45.216kg.

DSR-12

Page 370 of 2298

1013

1010

1007

1008 2205 1036 1222 1019 9999 9999

13.050.03

0116 0102 0103 0123 0124 0114 9999

Add wastage @ 10% = 4.522kg. = 49.738kg = 0.497 q M.S. Sheet quint (ii) Gussets plates-3.00mm thick vide (ii) in item 10.4 = 0.5910sqm. at mid height = 4x0.0528 = 0.2112sqm. = 0.8022sqm. Add wastage @ 10% = 0.0802sqm. =0.8824sqm. @ 23.55 kg/sqm =20.78 kg = 0.2078 qtl Gussets plates-3.00mm thick quint (iii) Angle iron:40x40x6mm @3.5kg/m Sides-4x2.40 = 9.6m Top & bottom-4xl.20=4.8m = 14.40m Add wastage @ 10% = 1.44m = 15.84m 15.84m @ 3.5kg. per m..= 55.44kg =0.554qtl Angle iron quint (iv) Flats 30x6mm @1.4kg/m 4x2.45=9.80m+ 2xl.20=2.40m = 12.20m+ Add wastage @ 10% = 1.22m = 13.42m 13.42m @ 1.4kg. per m. = 18.788kg. = 0.188q Flats quint Carriage of (i) (ii) and tonne (iv)-0.0497+0.0208+0.0554+0.0188=0.1447 tonne Pintles including welded pin each M.S. Cleats with bolts and nuts to rest on pintles each Hooks each Locking arrangements and handles L.S. Rivets L.S. Applying priming coatM.S. sheet = 11.52 Angle iron-0.16x24.3 = 3.89 0.16x14.40 = 2.30+ Flats 0.072x12.2 = 0.88 = 14.70sqm. Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise LABOURFitter (Grade I) Day Blacksmith 1st class Day Blacksmith 2nd class Day Mason 1st Class Day Mason 2nd class Day Beldar Day Sundries L.S.

0.497

4600.00

0.2078

4500.00

0.554

4250.00

0.188 0.1447

4200.00 77.87

4.00 4.00 2.00 167.70 269.10

35.00 110.00 30.00 1.49 1.49

14.70

20.72

2.00 3.00 4.00 0.06 0.06 5.00 161.46

301.00 301.00 273.00 301.00 273.00 247.00 1.49 Total: 11774.52

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 11892.27 Cost for 5.76 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2427.20 Rs 2427.15

Item Code: 10.6.1

DSR-12

Page 371 of 2298

S/F rolling shutters required size M.S. laths including p/f 27.5cm long wire springs M.S. top cover -80x1.25mm M.S. laths with 1.25 mm thick top cover. Details of Cost for : 7.50 Sqm Code Description Unit Quantity Rate MATERIALS: 0973 Rolling shutter - 80 x 1.25mm laths (machined rolled) sqm 7.50 1150.00 0974 Top cover for rolling shutters - 1.25mm thick metre 2.50 550.00 0975 Coiled type spring each 1.00 250.00 9999 Carriage L.S. 53.82 1.49 LABOUR: 0116 Fitter grade-I Day 2.55 301.00 0114 Beldar Day 2.55 247.00 0123 Mason I class Day 0.12 301.00 0124 Mason II class Day 0.12 273.00 9999 Sundries L.S. 60.58 1.49 Total: Add water charges @ 1% on 11886.73 Add C.P & OH @15% on 12005.60 Cost for 7.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1840.86 Rs 1840.85

Item Code: 10.6.2 S/F rolling shutters required size M.S. laths including p/f 27.5cm long wire springs M.S. top cover -80x1.20mm M.S. laths with 1.20 mm thick top cover. Details of Cost for : 7.50 Sqm Code Description Unit Quantity Rate MATERIALS: 7045 Rolling shutters of 80x1.00mm laths sqm 7.50 1010.00 7047 Top cover for rolling shutter 1.00mm thick metre 2.50 305.00 0975 Coiled type spring each 1.00 250.00 9999 Carriage L.S. 53.82 1.49 LABOUR: 0116 Fitter grade-I Day 2.55 301.00 0114 Beldar Day 2.55 247.00 0123 Mason I class Day 0.12 301.00 0124 Mason II class Day 0.12 273.00 9999 Sundries L.S. 60.58 1.49 Total: Add water charges @ 1% on 10224.23 Add C.P & OH @15% on 10326.47 Cost for 7.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1583.39 Rs 1583.40

Item Code: 10.6.3 S/F rolling shutters required size M.S. laths including p/f 27.5cm long wire springs M.S. top cover -80x0.90mm M.S. laths with 0.90mm thick top cover. Details of Cost for : 7.50 Sqm Code Description Unit Quantity Rate MATERIALS: 7044 Rolling shutter - 80x0.90 mm M.S. laths sqm 7.50 930.00 7046 Top cover for rolling shutters - 0.90mm thick metre 2.50 270.00 0975 Coiled type spring each 1.00 250.00

DSR-12

Page 372 of 2298

9999 0116 0114 0123 0124 9999

Carriage LABOUR: Fitter grade-I Beldar Mason I class Mason II class Sundries

L.S.

53.82

1.49

Day Day Day Day L.S.

2.55 2.55 0.12 0.12 60.58

301.00 247.00 301.00 273.00 1.49 Total: 9536.73

Add water charges @ 1% on

Add C.P & OH @15% on 9632.10 Cost for 7.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1476.92 Rs 1476.90

Item Code: 10.7 Providing and fixing ball bearing for rolling _x000D_ Code 0976 9999

Description Ball bearing (for rolling shutter) Sundries

Details of Cost for : 1.00 No. Unit Quantity each 1.00 L.S. 26.91 Add water charges @ 1% on

Rate 330.00 1.49 Total: 370.10

Add C.P & OH @15% on 373.80 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 429.87 Rs 429.85

Item Code: 10.8.1 Extra for providing mechanical device operation for rolling shutters : Exceeding 10.00 sqm upto 16.80sqm in the area. _x000D_ _x000D_ Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate 0977 Extra for mechanical devices for operatingrolling shutters : sqm o 1.00 520.00 exceeding 10.00 sq.m - upto 1 9999 Sundries L.S. 13.52 1.49 Total: Add water charges @ 1% on 540.14 Add C.P & OH @15% on 545.54 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 627.37 Rs 627.35

Item Code: 10.8.2 Extra for providing mechanical device operation for rolling shutters : Exceeding 16.80sqm in area. Details of Cost for : 1.00 Sqm Code Description Unit Quantity 0978 Extra for mechanical devices for operating rolling shutter - sqm o 1.00 exceeding 16.8sqmin area 9999 Sundries L.S. 13.52 Add water charges @ 1% on

DSR-12

Rate 550.00 1.49 Total: 570.14

Page 373 of 2298

Add C.P & OH @15% on 575.84 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 662.22 Rs 662.20

Item Code: 10.10.1 Fixing standard steel glazed doors, windows and ventilators in walls including fixing float glass panes with glazing clips (Only concrete and labour for fixing) - Fixing with 15x3 mm lugs 10 cm long embedded in CC block

Code

04.002.05

0102 0123 0124 0114 9999

Description

Details of Cost for : 15.00 Kg Unit Quantity

MATERIALS: Cement Concrete Blocks 15x10x10cm=0.009 cum P/L CC walls, columns, string courses, coping, bed blocks, Cum window sills etc. up to floor f LABOUR: Blacksmith 1st class Day Mason (brick layer) 1st class Day Mason (brick layer) 2nd class Day Beldar Day Sundries and carriage of materials L.S.

Rate

0.009

4782.36

0.17 0.08 0.08 0.50 67.28

301.00 301.00 273.00 247.00 1.49 Total: 320.84

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 324.05 Cost for 15.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 27.71 Rs 27.55

Item Code: 10.10.2 Fixing standard steel glazed doors, windows and ventilators in walls including fixing float glass panes with glazing clips (Only labour for fixing) - Fixing with carbon steel galvanised dash fastener of required dia and size

Code 0102 0114 9999

Description LABOUR: Blacksmith 1st class Beldar Sundries and carriage of materials

Details of Cost for : 15.00 Kg Unit Quantity Day Day L.S.

0.17 0.17 67.28

Add water charges @ 1% on

Rate 301.00 247.00 1.49 Total: 193.41

Add C.P & OH @15% on 195.34 Cost for 15.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 14.98 Rs 15.00

Item Code: 10.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, etc., - Fixing with 15x3 mm lugs 10 cm long embedded in CC block 15x10x10 cm of C.C. 1:3:6

Code

DSR-12

Description

Details of Cost for : 30.00 Kg Unit Quantity

Rate

Page 374 of 2298

1011 9999 0103 0116 0114 9999 10.010.01

13.050.03

MATERIALS: Steel glazed door,window/ ventilator, all members viz. F7D, F4B, K11 and K12B etc. Carriage of steel door LABOUR: Blacksmith 2nd class Fitter (grade 1) Beldar Sundries Fixing standard steel glazed doors, windows and ventilators in walls including fixing floa Applying steel primer (2.44 x1.00 for both sides = 2.44sqm)

Kg

30.00

48.00

L.S.

40.37

1.49

Day Day Day L.S. Kg

0.17 0.26 0.34 15.37 30.00

273.00 301.00 247.00 1.49 27.71

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise

2.44

20.72

Add water charges @ 1% except on [A]+[B] i.e on

Total: 1731.70

Add C.P & OH @15% except on [A]+[B] i.e on 1749.02 Cost for 30.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 96.44 Rs 96.30

Item Code: 10.11.2 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, etc., - Fixing with carbon steel galvanised dash fastener of required dia and size.

Code 1011 9999 0103 0116 0114 9999

13.050.03

Details of Cost for : 30.00 Kg Unit Quantity

Description MATERIALS: Steel glazed door,window/ ventilator, all members viz. F7D, F4B, K11 and K12B etc. Carriage of steel door LABOUR: Blacksmith 2nd class Fitter (grade 1) Beldar Sundries Applying steel primer (2.44 x1.00 for both sides = 2.44sqm)

Rate

Kg

30.00

48.00

L.S.

40.37

1.49

Day Day Day L.S.

0.17 0.26 0.34 15.37

273.00 301.00 247.00 1.49

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise

2.44

20.72

Add water charges @ 1% except on [A] i.e on

Total: 1731.70

Add C.P & OH @15% except on [A] i.e on 1749.02 Cost for 30.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 68.73 Rs 68.75

Item Code: 10.12 Extra P/F steel beading in steel windows Code

DSR-12

Details of Cost for : 1.00 m Description Unit Quantity Beading for doors, windows, Ventilators and composite units

Rate

Page 375 of 2298

1143 9999 9999

Cost of 1 metre beading Applying priming coat Fixing charges

metre L.S. L.S.

1.00 0.46 3.01

Add water charges @ 1% on

20.00 1.49 1.49 Total: 25.17

Add C.P & OH @15% on 25.42 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 29.23 Rs 29.25

Item Code: 10.13.1 P/F T-iron frames for doors, windows etc., including fixing butt hinges and screws and applying a priming coat of approved steel primer. - Fixing with 15x3 mm lugs 10 cm long embedded in CC block 15x10x10 cm of C.C. 1:3:6

Code

Details of Cost for : 17.50 Kg Unit Quantity

Description

Rate

MATERIALS: Tee iron 40x40x6mm = 2 + 2 + 1 = 5m 5 metres @3.5kg/m = 17.5kg.+ Add wastage @ 5% = 0.87kg. Total = 18.37 kg. Say 0.18 quintal 1007

Structural steel such as tees, angles channels and R.S. joists

quint

0.18

4250.00

M.S, bars 10mm = Ixlm = 1 metre 1 metre @ 0.60kg/m = 0.60kg.+ Add wastage @ 5% = 0.03kg. Total = 0.63 kg. Say = 0.006 quintal 1002

Mild steel round bar 12 mm dia and below M.S.flat 15x3mm = 6x10cm = 0.60 metre 0.6 metre @ 0.35kg/m = 0.21 kg+ Add wastage @ 5% = 0.01 kg. Total = 0.22 kg

quint

0.006

4100.00

1008

Flats up to 10 mm in thickness Cement concrete block 1:3:6- 6x15x10x10cm=0.009 cum

quint

0.002

4200.00

04.002.05

P/L CC walls, columns, string courses, coping, bed blocks, Cum window sills etc. up to floor f Bright finished or black enameled mild steel butt hinges 10 No 100x58x1.90 mm for screws and nuts and bolts L.S. for applying steel primer L.S. Carriage of material L.S. LABOUR: Blacksmith 2nd class Day Fitter (grade 1) Day Beldar Day Sundries L.S.

0.009

4782.36

6.00

80.00

35.88 17.94 5.33

1.49 1.49 1.49

0.10 0.15 0.20 8.97

273.00 301.00 247.00 1.49 Total: 1069.35

0595 9999 9999 9999 0103 0116 0114 9999

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1080.04 Cost for 17.50 Kg

DSR-12

Page 376 of 2298

Rate per One Kg: Rate as per DSR-12:

Rs 73.43 Rs 73.30

Item Code: 10.13.2 P/F T-iron frames for doors, windows etc., including fixing butt hinges and screws and applying a priming coat of approved steel primer. - Fixing with carbon steel galvanised dash fastener of required dia and size

Code

Details of Cost for : 17.50 Kg Unit Quantity

Description

Rate

MATERIALS: Tee iron 40x40x6mm = 2 + 2 + 1 = 5m 5 metres @3.5kg/m = 17.5kg.+ Add wastage @ 5% = 0.87kg. Total = 18.37 kg. Say 0.18 quintal 1007

Structural steel such as tees, angles channels and R.S. joists

quint

0.18

4250.00

Mild steel round bar 12 mm dia and below quint Bright finished or black enameled mild steel butt hinges 10 No 100x58x1.90 mm for screws and nuts and bolts L.S. for applying steel primer L.S. Carriage of material L.S. LABOUR: Blacksmith 2nd class Day Fitter (grade 1) Day Beldar Day Sundries L.S.

0.006 6.00

4100.00 80.00

35.88 17.94 5.33

1.49 1.49 1.49

0.10 0.15 0.20 8.97

273.00 301.00 247.00 1.49 Total: 1060.95

M.S, bars 10mm = Ixlm = 1 metre 1 metre @ 0.60kg/m = 0.60kg.+ Add wastage @ 5% = 0.03kg. Total = 0.63 kg. Say = 0.006 quintal 1002 0595 9999 9999 9999 0103 0116 0114 9999

Add water charges @ 1% on

Add C.P & OH @15% on 1071.56 Cost for 17.50 Kg Rate per One Kg: Rate as per DSR-12:

Rs 70.42 Rs 70.40

Item Code: 10.14.1.1 Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile B - Fixing with adjustable lugs with split end tail to each jamb Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS: 4006 Pressed steel door frames (mild steel sheet 1.25mm) Profile metre 5.00 220.00 “B” (Qty : 2+2+1=5m) 0595 Bright finished or black enameled mild steel butt hinges 10 No 6.00 80.00 100x58x1.90 mm 9999 Screws, nuts, bolts L.S. 35.88 1.49 50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or Say 0.03 qtl

DSR-12

Page 377 of 2298

1007

Structural steel such as tees, angles channels and R.S. joists

quint

0.03

4250.00

9999

Carriage of material LABOUR: Fitter (grade 1) Beldar Sundries Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise

L.S.

5.33

1.49

Day Day L.S.

0.15 0.20 8.97

301.00 247.00 1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total: 1444.82

0116 0114 9999

13.050.03

Add C.P & OH @15% except on [A] i.e on 1459.27 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 346.78 Rs 346.75

Item Code: 10.14.1.2 Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile B - Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Code 4006

9999 0595 9999

1007 9999 0116 0114 9999

13.050.03

Details of Cost for : 5.00 m Unit Quantity

Description MATERIALS: Pressed steel door frames (mild steel sheet 1.25mm) Profile “B” (Qty : 2+2+1=5m) Deduct for not providing adjustable lugs Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Screws, nuts, bolts 50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or Say 0.03 qtl Structural steel such as tees, angles channels and R.S. joists

Rate

metre

5.00

220.00

L.S. 10 No

-20.00 6.00

1.49 80.00

35.88

1.49

quint

0.03

4250.00

L.S.

5.33

1.49

Day Day L.S.

0.15 0.20 8.97

301.00 247.00 1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total: 1415.02

Carriage of material LABOUR: Fitter (grade 1) Beldar Sundries Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise

L.S.

Add C.P & OH @15% except on [A] i.e on 1429.17 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 339.86 Rs 339.85

Item Code: 10.14.2.1

DSR-12

Page 378 of 2298

Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile C - Fixing with adjustable lugs with split end tail to each jamb Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS: 4007 Pressed steel door frames (mild steel sheet 1.25mm) Profile metre 5.00 240.00 “C” (Qty : 2+2+1=5m) 0595 Bright finished or black enameled mild steel butt hinges 10 No 6.00 80.00 100x58x1.90 mm 9999 Screws, nuts, bolts L.S. 35.88 1.49 50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or Say 0.03 qtl 1007 Structural steel such as tees, angles channels and R.S. joists quint 0.03 4250.00 9999 0116 0114 9999

13.050.03

Carriage of material LABOUR: Fitter (grade 1) Beldar Sundries Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise

L.S.

5.33

1.49

Day Day L.S.

0.15 0.20 8.97

301.00 247.00 1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total: 1544.82

Add C.P & OH @15% except on [A] i.e on 1560.27 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 370.01 Rs 370.00

Item Code: 10.14.2.2 Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile C - Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Code 4007

9999 0595 9999

1007 9999 0116 0114 9999

DSR-12

Description MATERIALS: Pressed steel door frames (mild steel sheet 1.25mm) Profile “C” (Qty : 2+2+1=5m) Deduct for not providing adjustable lugs Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Screws, nuts, bolts 50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or Say 0.03 qtl Structural steel such as tees, angles channels and R.S. joists Carriage of material LABOUR: Fitter (grade 1) Beldar Sundries Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm

Details of Cost for : 5.00 m Unit Quantity

Rate

metre

5.00

240.00

L.S. 10 No

-20.00 6.00

1.49 80.00

35.88

1.49

quint

0.03

4250.00

L.S.

5.33

1.49

Day Day L.S.

0.15 0.20 8.97

301.00 247.00 1.49

L.S.

Page 379 of 2298

13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total: 1515.02

Add C.P & OH @15% except on [A] i.e on 1530.17 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 363.09 Rs 363.10

Item Code: 10.14.3.1 Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile E - Fixing with adjustable lugs with split end tail to each jamb Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS: 4008 Pressed steel door frames (mild steel sheet 1.25mm) Profile metre 5.00 270.00 “E” (Qty : 2+2+1=5m) 0595 Bright finished or black enameled mild steel butt hinges 10 No 6.00 80.00 100x58x1.90 mm 9999 Screws, nuts, bolts L.S. 35.88 1.49 50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or Say 0.03 qtl 1007 Structural steel such as tees, angles channels and R.S. joists quint 0.03 4250.00 9999 0116 0114 9999

13.050.03

Carriage of material LABOUR: Fitter (grade 1) Beldar Sundries Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise

L.S.

5.33

1.49

Day Day L.S.

0.15 0.20 8.97

301.00 247.00 1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total: 1694.82

Add C.P & OH @15% except on [A] i.e on 1711.77 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 404.86 Rs 404.85

Item Code: 10.14.3.2 Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile E - Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Code 4008

9999 0595

DSR-12

Description

Details of Cost for : 5.00 m Unit Quantity

MATERIALS: Pressed steel door frames (mild steel sheet 1.25mm) Profile metre “E” (Qty : 2+2+1=5m) Deduct for not providing adjustable lugs L.S. Bright finished or black enameled mild steel butt hinges 10 No 100x58x1.90 mm

Rate

5.00

270.00

-20.00 6.00

1.49 80.00

Page 380 of 2298

9999

1007 9999 0116 0114 9999

13.050.03

Screws, nuts, bolts L.S. 50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or Say 0.03 qtl Structural steel such as tees, angles channels and R.S. joists quint

35.88

1.49

0.03

4250.00

L.S.

5.33

1.49

Day Day L.S.

0.15 0.20 8.97

301.00 247.00 1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total: 1665.02

Carriage of material LABOUR: Fitter (grade 1) Beldar Sundries Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise

Add C.P & OH @15% except on [A] i.e on 1681.67 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 397.93 Rs 397.90

Item Code: 10.15.1 P/F M.S. Tubular frames for doors, windows etc., .. Fixing with 15x3 mm lugs 10 cm long embedded in cement_x000D_ concrete block 15x10x10 cm of C.C. 1:3:6 Details of Cost for : 7.13 Kg Code Description Unit Quantity Rate MATERIALS: L- section - 32x22x28mm 1.60mm thick 2.00+2.00+1.00 = 5.00 m Width of MS sheet = 32+24.80+22+24.80+10mm = 113.60mm = 0.1 136m Area of MS sheet = 0.1136x5.00x0.0016 = 0.0009088 sqm Weight of Sheet = 0.0009088x7850 = 7.134 kg Add wastage @ 5% = 0.357kg. Total = 7.491 kg Say 7.49 kg 4011

Mild steel tubes electric resistant or induction butt welded

kilog

7.49

65.00

M.S, bars 10mm = Ixlm = 1 metre 1 metre @ 0.60kg/m = 0.60kg.+ Add wastage @ 5% = 0.03kg. Total = 0.63 kg. Say = 0.006 quintal

DSR-12

1002

Mild steel round bar 12 mm dia and below M.S.flat 15x3mm = 6x10cm = 0.60 metre 0.6 metre @ 0.35kg/m = 0.21 kg+ Add wastage @ 5% = 0.01 kg. Total = 0.22 kg

quint

0.006

4100.00

1008

Flats up to 10 mm in thickness Cement concrete block 1:3:6- 6x15x10x10cm= 0.009 cum

quint

0.002

4200.00

04.002.05

P/L CC walls, columns, string courses, coping, bed blocks, Cum window sills etc. up to floor f

0.009

4782.36

Page 381 of 2298

0595 9999 9999 9999 0103 0116 0114 9999

Bright finished or black enameled mild steel butt hinges 10 No 100x58x1.90 mm for screws and nuts and bolts L.S. for applying steel primer L.S. Carriage of material L.S. LABOUR: Blacksmith 2nd class Day Fitter (grade 1) Day Beldar Day Sundries L.S.

6.00

80.00

35.88 17.94 5.33

1.49 1.49 1.49

0.04 0.06 0.08 3.64

273.00 301.00 247.00 1.49 Total: 710.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 717.24 Cost for 7.13 Kg Rate per One Kg: Rate as per DSR-12:

Rs 121.72 Rs 121.45

Item Code: 10.15.2 P/F M.S. Tubular frames for doors, windows etc., .. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) Details of Cost for : 7.13 Kg Code Description Unit Quantity Rate MATERIALS: L- section - 32x22x28mm 1.60mm thick 2.00+2.00+1.00 = 5.00 m Width of MS sheet = 32+24.80+22+24.80+10mm = 113.60mm = 0.1 136m Area of MS sheet = 0.1136x5.00x0.0016 = 0.0009088 sqm Weight of Sheet = 0.0009088x7850 = 7.134 kg Add wastage @ 5% = 0.357kg. Total = 7.491 kg Say 7.49 kg 4011

Mild steel tubes electric resistant or induction butt welded

kilog

7.49

65.00

0.006 6.00

4100.00 80.00

35.88 17.94 5.33

1.49 1.49 1.49

0.04 0.06 0.08 3.64

273.00 301.00 247.00 1.49 Total: 701.74

M.S, bars 10mm = Ixlm = 1 metre 1 metre @ 0.60kg/m = 0.60kg.+ Add wastage @ 5% = 0.03kg. Total = 0.63 kg. Say = 0.006 quintal 1002 0595 9999 9999 9999 0103 0116 0114 9999

Mild steel round bar 12 mm dia and below quint Bright finished or black enameled mild steel butt hinges 10 No 100x58x1.90 mm for screws and nuts and bolts L.S. for applying steel primer L.S. Carriage of material L.S. LABOUR: Blacksmith 2nd class Day Fitter (grade 1) Day Beldar Day Sundries L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 708.76 Cost for 7.13 Kg

DSR-12

Page 382 of 2298

Rate per One Kg: Rate as per DSR-12:

Rs 114.32 Rs 114.30

Item Code: 10.16.1 Steel work in built up tubular trusses .. ..including applying a priming coat of approved steel primer, - Hot finished welded type tubes. Details of Cost for : 119.00 Kg Code Description Unit Quantity Rate MATERIALS: 50mm dia. tube Tie beam-lx8.0m = 8.00m+ Principal rafter 2x4.30m = 8.60m =16.60m 16.60m @ 5.10kg./m = 84.66kg. 40mm dia. tube Members = 2(0.45+1.25+0.90+2.15) = 2x4.75=9.50m 9.50m @ 3.61kg/m = 34.60Kg. Total = 118.96kg. Add wastage @ 5% = 5.94Kg. = 124.90Kg. say 125 kg 4009 2205

MS tube (hot finished welded type) Carriage of steel Priming coat 50mm dia. tube 16.60x0.157m = 1.61 sqm. 40mm dia. tube 9.50x0.125m = 1.91 sqm. =2.80sqm

13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise Welding charges:Rafter:- 4x22/7x6.03 = 75.80cm.+ Ties:- 2x22/7x6.03=37.90cm.+ Members:-2x4x2x22/7x4.83=242.87cm = 356.57cm say 357cm

1215

Welding charges (electric) For cutting, assembling & erection LABOUR: Blaks smith I Class Bandhani Beldar Sundries

0102 0100 0114 9999

kilog tonne

125.00 0.125

48.00 77.87

2.80

20.72

cm

357.00

1.50

Day Day Day L.S.

1.50 0.75 5.50 80.73

301.00 260.00 247.00 1.49 Total: 8670.52

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 8757.23 Cost for 119.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 85.12 Rs 85.10

Item Code: 10.16.2 Steel work in built up section in tubular trusses : Hot finished seamless type tubes. Details of Cost for : 119.00 Kg Code Description Unit Quantity

DSR-12

Rate

Page 383 of 2298

Details of cost for a truss of span 8 metre weight = 119 kg.

4010 2205

13.050.03

1215 0102 0100 0114 9999

MATERIALS 50mm dia. tube Tie beam- I x 8.0m = 8.00m + Principal rafter 2x4.30m = 8.60m = 16.60m 16.60m @ 5.10kg./ m = 84.66 kg. 40mm dia. tube Members = 2(0.45+1.25+0.90+2.15) = 2x4.75 = 9.50m 9.50m @ 3.61kg/m = 34.60kg. Total = 118.96kg. Add wastage @ 5% = 5.94kg. = 124.90kg. say 125 Kg. Mild steel tubes hot finished seamless type kilog Carriage of tubes tonne Priming coat 50mm dia. tube 16.60x0.157 m = 1.61 sqm. 40mm dia. tube 9.50x 10125m = 1.91 sqm. =2.80 sqm. Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Welding charges:Rafter:- 4x22/7x6.03 = 75.80cm.+ Ties :- 2x22/7x6.03=37.90cm.+ Members :- 2x4x2x22/7x4.83 = 242.87cm = 356.57 cm say 357 cm Welding cm LABOUR Blacksmith 1st class Day Bandhani Day Beldar Day Sundries L.S.

125.00 0.125

58.00 77.87

2.80

20.72

357.00

1.50

1.50 0.75 5.50 80.73

301.00 260.00 247.00 1.49 Total: 9920.52

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 10019.73 Cost for 119.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 97.32 Rs 97.30

Item Code: 10.16.3 Steel work in built up section in tubular trusses : Electric resistance or induc- tion butt welded tubes. Details of Cost for : 119.00 Kg Code Description Unit Quantity Details of cost for a truss of span 8 metre weight = 119 kg.

Rate

MATERIALS50mm dia. tube Tie beam-1x8.0m = 8.00m+ Principal rafter 2x4.30m = 8.60m = 16.60m 16.60m @ 5.10kg./m = 84.66kg. 40mm dia. tube Members = 2(0.45+1.25+0.90+2.15) = 2x4.75=9.50m 9.50m @ 3.61kg/m = 34.60Kg. Total = 118.96kg.

DSR-12

Page 384 of 2298

4011 2205

13.050.03

1215 0102 0100 0114 9999

Add wastage @ 5% = 5.94Kg. = 124.90Kg. say 125 kg. Electric resistance or Induction on butt welded tubes kilog Carriage of tubes tonne Priming coat 50mm dia. tube 16.60x0.157 m = 1.61 sqm. 40mm dia. tube 9.50x 10125m = 1.91 sqm. =2.80 sqm. Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Welding charges:Rafter:- 4x22/7x6.03 = 75.80cm.+ Ties :- 2x22/7x6.03=37.90cm.+ Members :- 2x4x2x22/7x4.83 = 242.87cm = 356.57 cm say 357 cm Welding cm LABOUR Blacksmith 1st class Day Bandhani Day Beldar Day Sundries L.S.

125.00 0.125

65.00 77.87

2.80

20.72

357.00

1.50

1.50 0.75 5.50 80.73

301.00 260.00 247.00 1.49 Total: 10795.52

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 10903.48 Cost for 119.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 105.86 Rs 105.85

Item Code: 10.17 P/F MS fan clamp type I/II of 16mm dia MS bar Code

1003 0103 0114 9999

Description Details of cost for 1 clamp MATERIATS16mm dia. M.S. bar 1m @ 1.58 kg/m 1x1.58 = 1.58Kg+ Add wastage @ 5% = 0.08 Kg. = 1.66 Kg. Say 1.70kg. or 0.017q M.S. bar LABOURBlacksmith 2nd class Beldar Sundries (Carriage, fixing and painting etc.)

Details of Cost for : 1.00 No. Unit Quantity

Rate

quint

0.017

4000.00

Day Day L.S.

0.04 0.04 1.82

273.00 247.00 1.49 Total: 91.51

Add water charges @ 1% on

Add C.P & OH @15% on 92.43 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 106.29 Rs 106.30

Item Code: 10.18 P/F circular/Hexagonal CI/ MS sheet box for ceiling fan clamp & top lids, clamps 12mm dia MS bar Details of Cost for : 1.00 No.

DSR-12

Page 385 of 2298

Code

4012

1002 0103 0114 9999

Description Details of cost of one box clamp MATERIALSCircular C.I. Box including bottom and top lids 12mm dia. M.S. bar 80cm @ 0.9kg/m 0.72kg+ Add wastage @ 5% - 0.036 0.756 kg. Say 0.008 q LABOURBlacksmith 2nd class Beldar Sundries (Carriage, fixing and painting etc.)

Unit

Quantity

Rate

each

1.00

50.00

quint

0.008

4100.00

Day Day L.S.

0.03 0.03 1.82

273.00 247.00 1.49 Total: 101.11

Add water charges @ 1% on

Add C.P & OH @15% on 102.12 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 117.44 Rs 117.45

Item Code: 10.19 Code

1035 1010 0103 9999

Description Details of cost for one bolt 16mm dia. and 1200mm long. MATERIALSl .2m @ 1.58kg/m = 1.895 kg = 0.019q Plate-100xl00x6mm @ 47kg/sqm. Wt. = 0.47kg. = 0.005q LABOURBlacksmith 2nd class Carriage and labour for fixing

Details of Cost for : 2.40 Kg Unit Quantity

Rate

quint

0.019

5400.00

quint

0.005

4500.00

Day L.S.

0.03 4.55

273.00 1.49 Total: 140.07

Add water charges @ 1% on

Add C.P & OH @15% on 141.47 Cost for 2.40 Kg Rate per One Kg: Rate as per DSR-12:

Rs 67.79 Rs 67.80

Item Code: 10.20 P/F bolts i/c nuts, washers complete Code

1034 2205 0103 0114 9999

DSR-12

Description Details of cost for 0.10q of nuts and washers MATERIALSBolts, nuts and washers Carriage LABOURBlacksmith 2nd class Beldar Sundries

Details of Cost for : 10.00 Kg Unit Quantity

Rate

quint tonne

0.10 0.01

5400.00 77.87

Day Day L.S.

0.38 0.38 4.55

Add water charges @ 1% on

273.00 247.00 1.49 Total: 745.16

Add C.P & OH @15% on

752.61

Page 386 of 2298

Cost for 10.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 86.55 Rs 86.55

Item Code: 10.21 Code

1020 2205 0116 0139 9999

Description Details of cost for 0.10q of rivets MATERIALSRivets Carriage LABOURFitter (Grade I) Beldar special Sundries

Details of Cost for : 10.00 Kg Unit Quantity

quint tonne Day Day L.S.

Rate

0.10 0.01

4800.00 77.87

0.83 0.83 10.79

301.00 260.00 1.49 Total: 962.49

Add water charges @ 1% on

Add C.P & OH @15% on 972.11 Cost for 10.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 111.79 Rs 111.80

Item Code: 10.22 Welding by gas or electric plant i/c transportation of plant Code 1214 9999

Details of Cost for : 1.00 cm Description Unit Quantity Welding by gas electric plant including transportation of cm 1.00 welding plant at site etc. compl Sundries L.S. 0.26 Add water charges @ 1% on

Rate 1.50 1.49 Total: 1.89

Add C.P & OH @15% on 1.91 Cost for 1.00 cm Rate per One Cm: Rate as per DSR-12:

Rs 2.20 Rs 2.20

Item Code: 10.25.1 Steel work welded in built up sections etc as required in stringers, treads etc of staircase Details of Cost for : 533.10 Kg Code Description Unit Quantity Consider a flight of staircase of 2.8m height with tread and riser of 200mm & 0.60m wide. MATERIALS(i) Unequal angles as stringers-75x50x6mm 4x12.69x5.6 = 284.25 Kg. Add wastage @ 5% =14.21 Kg. = 298.46kg. Say 2.985q (ii) unequal angles at sides 50x30x5mm 2xl4x0.2x3.00=I6.8kg. Add wastage @ 5% = 0.84kg. = 17.64 kg. Say 0.176q = 3.161q 1007 Unequal angles quint 3.161

DSR-12

Rate

4250.00

Page 387 of 2298

1010

1549

1003 2205 2271 1215 0102 0114 0100

13.050.03 9999

(iii) plate for tread 8mm thick 14x7.5= 105.00kg+ Add wastage @ 5% = 5.25kg. = 110.25kg. Say 1.103q Plate for tread quint (iv) G. pipe for railing 40mm 2xl2.69m = 25.38m+ Add wastage @ 5% = 1.27m = 26.65m G.I. Pipe for railing metre (v) M.S. round bars 16mm dia. 15x0.75x2xl.58 = 35.55kg.+ Add wastage @ 5% = 1.78kg. = 37.33 Kg. Say O.373q M.S. round bars quint Carriage of steel (3.I61 + 1.103+0.373)=4.637q = 0.4637 tonne tonne Carriage of g.I. Pipe approx. wt. tonne 3.72x26.65=99.14kg. Welding charge (electric) 23.20m cm LABOUR: Blacksmith 1st class Day Beldar Day Bandhani Day Applying priming coat (i) steps 2.4x 14 = 33.60sqm.+ (ii) angles 4x 12.69x0.25 = 12.69sqm.+ (iii) Bars and other components = 2.00 sqm. Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Sundries L.S.

1.103

4500.00

26.65

202.00

0.373

4000.00

0.4637 0.0991

77.87 77.87

2320.00

1.50

1.85 1.25 0.60

301.00 247.00 260.00

48.29

20.72

110.89

1.49 Total: 29983.71

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 30283.55 Cost for 533.10 Kg Rate per One Kg: Rate as per DSR-12:

Rs 67.20 Rs 67.20

Item Code: 10.25.2 Steel work welded in built up sections/ framed work including priming coat - In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Details of Cost for : 21.80 Kg Code Description Unit Quantity Rate MATERIALS: Details of Imxlm framed guard bar grating. (i) M.S. flat 50x6 mm 2.4kg/per metre 5.75x2.40 = 13.8kg. + Add wastage@ 5% = 0.69kg., Total = 14.49kg. say 14.5 kg. 1008

1002 2205 1215 0102 0114

DSR-12

M.S. Flat (ii) 12mm dia. Bars @ 0.89 kg/m 9x1 = 9 metre @ 0.89kg/m = 8.01 kg+Add wastag MS round bars 12mm dia and below Carriage of steel Welding charges (electric) LABOUR : Blaks smith I Class Beldar

quint quint tonne cm Day Day

0.145 0.084 0.0229 60.00

4200.00 4100.00 77.87 1.50

0.70 0.50

301.00 247.00

Page 388 of 2298

Applying priming coat 0.65 sqm 0100 13.050.03 9999

Bandhani Day Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise Sundries L.S.

0.25 0.65

260.00 20.72

4.55

1.49 Total: 1451.16

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1465.67 Cost for 21.80 Kg Rate per One Kg: Rate as per DSR-12:

Rs 77.94 Rs 77.90

Item Code: 10.26.1 P/F hand rail by welding to steel ladder railing MS tube Code

4009

2205 13.050.03 1215

0102 0114 0100 9999

Description Details of cost for hand rail of railing of two flights of staircase, length of hand rail = 5.40m MATERIALSM.S. tube 40mm nominal bore (medium) = 5.40m @ 3.6lkg/m= 19.49kg Add wastage @ 5% =0.097 Total = 20.46 kg. Carriage of tube Priming coat 40mm dia.Tube-5.4x22/7x0.0483= 0.82 sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Welding charges (joints of hand rail and ballustards) 18x4x1.00 = 72cm Labour for cutting assembling & erection Blacksmith 1st class Beldar Bandhani Sundries

Details of Cost for : 19.49 Kg Unit Quantity

Rate

kilog

20.46

48.00

tonne

0.0205

77.87

0.82

20.72

cm

72.00

1.50

Day Day Day L.S.

0.24 0.90 0.12 12.48

301.00 247.00 260.00 1.49 Total: 1436.02

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1450.38 Cost for 19.49 Kg Rate per One Kg: Rate as per DSR-12:

Rs 86.45 Rs 86.45

Item Code: 10.26.2 P/F hand rail by welding to steel ladder railing ERW tubes Code

4011

2205

DSR-12

Details of Cost for : 17.71 Kg Description Unit Quantity Details of cost for hand rail of railing of two flights of staircase, length of hand rail = 5.40m MATERIALSE.R.W. tube 40mm nominal bore = 5.40m @ kilog 18.59 3.28kg/m= 17.31kg Add wastage @ 5% = 0.88 kg Total = 18.59 kg Carriage of tube tonne 0.0186

Rate

65.00

77.87

Page 389 of 2298

Priming coat 40mm dia.Tube-5.4x22/7x0.0483 = 0.82 sqm 13.050.03 1215

0102 0114 0100 9999

Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Welding charges (joints of hand rail and ballustards) 18x4x1.00 = 72cm Labour for cutting assembling & erection Blacksmith 1st class Beldar Bandhani Sundries

0.82

20.72

cm

72.00

1.50

Day Day Day L.S.

0.24 0.90 0.12 12.48

301.00 247.00 260.00 1.49 Total: 1662.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1678.76 Cost for 17.71 Kg Rate per One Kg: Rate as per DSR-12:

Rs 109.97 Rs 109.95

Item Code: 10.26.3 P/F hand rail by welding to steel ladder railing GI pipes Code

1549

2271

13.050.03 1215

0102 0114 0100 9999

Details of Cost for : 20.09 Kg Description Unit Quantity Details of cost for hand rail of railing of two flights of staircase, length of hand rail =5.40m MATERIALSG.I. pipe 40mm nominal bore = 5.40m metre 5.67 Add wastage @ 5% = 0.27m Total = 5.67m Carriage of pipe (5.67m @ 3.72 kg/m = 21.09kg) tonne 0.0211 Priming coat 40mm dia.Tube-5.4x22/7x0.0483 = 0.82 sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Welding charges (joints of hand rail and ballustards) 18x4x1.00 = 72cm Labour for cutting assembling & erection Blacksmith 1st class Beldar Bandhani Sundries

Rate

202.00

77.87

0.82

20.72

cm

72.00

1.50

Day Day Day L.S.

0.24 0.90 0.12 12.48

301.00 247.00 260.00 1.49 Total: 1599.32

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1615.31 Cost for 20.09 Kg Rate per One Kg: Rate as per DSR-12:

Rs 93.31 Rs 93.30

Item Code: 10.27.1 P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 60 mm

Code

Description

Details of Cost for : 10.00 Nos Unit Quantity

Rate

MATERIALS:

DSR-12

Page 390 of 2298

2506 0124 0114 9999

Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No mmdia double threaded 6.8 grade Mason (brick layer) 2nd class Day Beldar Day Sundries Carriage of material L.S.

10.00

250.00

0.40 0.40 10.00

273.00 247.00 1.49 Total: 472.90

Add water charges @ 1% on

Add C.P & OH @15% on 477.63 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 54.93 Rs 54.95

Item Code: 10.27.2 P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 80 mm

Code 2507 0124 0114 9999

Description

Details of Cost for : 10.00 Nos Unit Quantity

MATERIALS: Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No mmdia double threaded 6.8 grade Mason (brick layer) 2nd class Day Beldar Day Sundries Carriage of material L.S.

Rate

10.00

293.00

0.40 0.40 10.00

273.00 247.00 1.49 Total: 515.90

Add water charges @ 1% on

Add C.P & OH @15% on 521.06 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 59.92 Rs 59.90

Item Code: 10.27.3 P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 120mm

Code 2508 0124 0114 9999

Description

Details of Cost for : 10.00 Nos Unit Quantity

MATERIALS: Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No mmdia double threaded 6.8 grade Mason (brick layer) 2nd class Day Beldar Day Sundries Carriage of material L.S.

Rate

10.00

364.00

0.50 0.50 10.00

273.00 247.00 1.49 Total: 638.90

Add water charges @ 1% on

Add C.P & OH @15% on 645.29 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 74.21 Rs 74.20

Item Code: 10.27.4 P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 140 mm

DSR-12

Page 391 of 2298

Code 2509 0124 0114 9999

Description

Details of Cost for : 10.00 Nos Unit Quantity

MATERIALS: Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No mmdia double threaded 6.8 grade Mason (brick layer) 2nd class Day Beldar Day Sundries Carriage of material L.S.

Rate

10.00

425.00

0.50 0.50 10.00

273.00 247.00 1.49 Total: 699.90

Add water charges @ 1% on

Add C.P & OH @15% on 706.90 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 81.29 Rs 81.30

Item Code: 10.27.5 P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 160 mm

Code 2510 0124 0114 9999

Description

Details of Cost for : 10.00 Nos Unit Quantity

MATERIALS: Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No mmdia double threaded 6.8 grade Mason (brick layer) 2nd class Day Beldar Day Sundries Carriage of material L.S.

Rate

10.00

560.00

0.60 0.60 10.00

273.00 247.00 1.49 Total: 886.90

Add water charges @ 1% on

Add C.P & OH @15% on 895.77 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 103.01 Rs 103.00

Item Code: 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., Details of Cost for : 2.00 Kg Code Description Unit Quantity MATERIALS: Qty of stainless steel : 2 .00 + wastage @ 5% =0.10 = 2.10 kg 4001 Stainless steel (Grade-304)hollow section round/square tubes Kg 2.10

325.00

4002

1.00

120.00

0.06 0.20 0.02 30.00 20.00 7.50

301.00 247.00 260.00 1.49 1.49 1.49 Total: 960.84

0102 0114 0100 9999 9999 9999

Stainless steel bolts/square bar and plates Kg For fabrication, assembling, erection, welding, curvaturing, grinding, buffing etc., LABOUR: Blacksmith 1st class Day Beldar Day Bandhani Day Welding of stainless steel section L.S. Curvaturing, grinding, buffing etc., L.S. Sundries for making good the walls and floors L.S.

Add water charges @ 1% on

DSR-12

Rate

Page 392 of 2298

Add C.P & OH @15% on 970.45 Cost for 2.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 558.01 Rs 558.00

Item Code: 10.29.1 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Code

Description

Details of Cost for : 1.54 Sqm Unit Quantity

Rate

MATERIALS: Wire gauze 1.40x1.10=1.54 sqm Add wastage @ 10%=0.15 sqm Total =1.69 sqm. 7029 9999

1008 9999 0103 0112 0114 9999

Galvanised wire mesh of average width of aperture 1.4 mm sqm and nominal dia. of wire 0.63 mm Carriage L.S. M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre Add wastage @ 5%=0.25 m Total=5.25 m [email protected]/m=1.84 kg Flats up to 10 mm in thickness Carriage LABOUR: Blacksmith 2nd class Carpenter 2nd class Beldar Sundries

1.69

230.00

1.82

1.49

quint L.S.

0.0184 1.82

4200.00 1.49

Day Day Day L.S.

0.17 0.17 0.06 19.76

273.00 273.00 247.00 1.49 Total: 608.48

Add water charges @ 1% on

Add C.P & OH @15% on 614.56 Cost for 1.54 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 458.92 Rs 458.95

Item Code: 10.29.2 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Code

Description

Details of Cost for : 1.54 Sqm Unit Quantity

Rate

MATERIALS: Wire gauze 1.40x1.10=1.54 sqm Add wastage @ 10%=0.15 sqm Total =1.69 sqm. 8737 9999

DSR-12

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm 0.50 mm dia wire Carriage L.S. M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre Add wastage @ 5%=0.25 m

1.69

760.00

1.82

1.49

Page 393 of 2298

Total=5.25 m [email protected]/m=1.84 kg 1008 9999 0103 0112 0114 9999

Flats up to 10 mm in thickness Carriage LABOUR: Blacksmith 2nd class Carpenter 2nd class Beldar Sundries

quint L.S.

0.0184 1.82

4200.00 1.49

Day Day Day L.S.

0.17 0.17 0.06 19.76

273.00 273.00 247.00 1.49 Total: 1504.18

Add water charges @ 1% on

Add C.P & OH @15% on 1519.22 Cost for 1.54 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1134.48 Rs 1134.50

Item Code: 10.30.1 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with - 4.0 mm thick glass panes Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate Details of cost for 10 glass panes (area of each pane = 0.10 sqm) MATERIALS: Area of glass panes =1.00 sqm + Add wastage @ 10% = 0.10 Total =1.10 sqm 2406 9999 0119 9999

Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Carriage LABOUR: Glazier Sundries, putty, glazing clips, scaffoldings etc.,

sqm

1.10

310.00

L.S.

1.82

1.49

Day L.S.

0.13 125.58

273.00 1.49 Total: 566.31

Add water charges @ 1% on

Add C.P & OH @15% on 571.97 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 657.77 Rs 657.75

Item Code: 10.30.2 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with - 5.5 mm thick glass panes Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate Details of cost for 10 glass panes (area of each pane = 0.10 sqm) MATERIALS: Area of glass panes =1.00 sqm + Add wastage @ 10% = 0.10 Total =1.10 sqm

DSR-12

Page 394 of 2298

2407 9999 0119 9999

Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 kg/sqm). Carriage LABOUR: Glazier Sundries, putty, glazing clips, scaffoldings etc.,

sqm

1.10

450.00

L.S.

1.82

1.49

Day L.S.

0.13 125.58

273.00 1.49 Total: 720.31

Add water charges @ 1% on

Add C.P & OH @15% on 727.51 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 836.64 Rs 836.65

Item Code: 11.1.1 Brick on edge flooring with 75 class designation bricks in cement mortar : 1:4- coarse sand Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS: 2602 Common burnt clay F.P.S (non modular) Bricks of class 1000 565.00 designation 7.5 2201 Carriage of bricks 1000 565.00 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). Cum 0.434 0367 Cement tonne 0.02 (For slurry) 2209 Carriage of cement tonne 0.02 LABOUR: 0124 Mason II class Day 1.08 0114 Beldar Day 0.25 0115 Coolie Day 1.62 0101 Bhisthi Day 0.27 Add water charges @ 1% on

Rate 2900.00 233.60 3485.41 5000.00 77.87 273.00 247.00 247.00 260.00 Total: 4211.64

Add C.P & OH @15% on 4253.76 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 489.18 Rs 489.20

Item Code: 11.1.2 Brick on edge flooring with 75 class designation bricks in cement mortar : 1:6- coarse sand Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS: 2602 Common burnt clay F.P.S (non modular) Bricks of class 1000 565.00 designation 7.5 2201 Carriage of bricks 1000 565.00 03.011 Cement mortar 1:6 (1 cement : 6 coarse sand). Cum 0.434 0367 Cement tonne 0.02 (For slurry) 2209 Carriage of cement tonne 0.02 LABOUR: 0124 Mason II class Day 1.08 0114 Beldar Day 0.25 0115 Coolie Day 1.62 0101 Bhisthi Day 0.27

DSR-12

Rate 2900.00 233.60 2825.29 5000.00 77.87 273.00 247.00 247.00 260.00

Page 395 of 2298

Add water charges @ 1% on

Total: 3925.15

Add C.P & OH @15% on 3964.40 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 455.91 Rs 455.90

Item Code: 11.2 Dry brick on edge floor with bricks of class 75 filling joints with local fine sand Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS:2602 Common burnt clay F.P.S (non modular) Bricks of class 1000 645.00 designation 7.5 2201 Carriage of bricks 1000 645.00 0983 Fine sand cum 0.15 2203 Carriage of fine sand cum 0.15 03.018 Mud mortar 0.15 (Rate as per item No. 3.18) LABOUR:0124 Mason 2nd class Day 0.90 0115 Coolie Day 1.98 0101 Bhisti Day 0.05 Add water charges @ 1% on

Rate 2900.00 233.60 640.00 87.60 301.12

273.00 247.00 260.00 Total: 2923.24

Add C.P & OH @15% on 2952.47 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 339.53 Rs 339.55

Item Code: 11.3.1 Cement concrete flooring 1:2:4 ...40mm thick with 20mm nominal size stone aggregate. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS:0295 20mm nominal size stone ballast cum 0.267 0297 10mm nominal size stone ballast cum 0.089 2202 Carriage of stone ballast cum 0.356 0982 Coarse sand cum 0.178 2203 Carriage of sand cum 0.178 0367 Cement for slurry tonne 0.17 2209 Carriage of cement tonne 0.17 LABOUN0124 Mason 2nd class Day 0.80 0114 Beldar Day 1.40 0101 Bhisti Day 1.04 0127 Mixer operator Day 0.03 0002 Mixer Day 0.03 9999 Sundries L.S. 40.43 Add water charges @ 1% on

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87 273.00 247.00 260.00 301.00 800.00 1.49 Total: 2411.05

Add C.P & OH @15% on 2435.16 Cost for 10.00 Sqm

DSR-12

Page 396 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 280.04 Rs 280.05

Item Code: 11.4 52 mm thick CC flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 and top layer 12 mm thick cement hardener consisting of mix 1:2 by volume .... Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS:0295 20mm ballast cum 0.267 1050.00 0297 10mm ballast cum 0.089 1050.00 2202 Carriage of stone ballast cum 0.356 87.60 0982 Coarse sand cum 0.178 1120.00 2203 Carriage of coarse sand cum 0.178 87.60 0298 Stone aggregate 6mm cum 0.115 1100.00 2202 Carriage of stone ballast aggregate 6mm cum 0.115 87.60 0367 Cement tonne 0.211 5000.00 0367 Cement for slurry tonne 0.02 5000.00 2209 Carriage of cement tonne 0.231 77.87 7254 Hardening compound litre 2.44 37.00 9999 Carriage of hard crete L.S. 2.73 1.49 Labour 0124 Mason 2nd class Day 2.15 273.00 0114 Beldar Day 1.60 247.00 0115 Coolie Day 1.88 247.00 0101 Bhisti Day 0.27 260.00 9999 Sundries L.S. 53.82 1.49 Total: Add water charges @ 1% on 3620.75 Add C.P & OH @15% on 3656.96 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 420.55 Rs 420.50

Item Code: 11.5 62mm thick CC with concrete hardener topping_x000D_under layer 50mm thick CC 1:2:4 and top layer 12_x000D_mm thick cement hardener of mix 1:2_x000D_ Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.334 1050.00 0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.111 1050.00 2202 Carraige of Stone aggregate below 40 mm nominal size cum 0.445 87.60 0982 Coarse sand (zone III) cum 0.222 1120.00 2203 Carraige of Coarse sand cum 0.222 87.60 0298 Stone Aggregate (Single size) : 06 mm nominal size cum 0.115 1100.00 2202 Carraige of Stone aggregate below 40 mm nominal size cum 0.115 87.60 0367 Portland Cement tonne 0.243 5000.00 0367 Portland Cement tonne 0.02 5000.00 2209 Carraige of Cement tonne 0.263 77.87 7254 Hard crete litre 2.44 37.00 9999 Sundries L.S. 2.73 1.49 Labour 0124 Mason (brick layer) 2nd class Day 2.15 273.00 0114 Beldar Day 1.86 247.00

DSR-12

Page 397 of 2298

0115 0101 9999

Coolie Bhisti Sundries

Day Day L.S.

1.88 0.27 53.82

Add water charges @ 1% on

247.00 260.00 1.49 Total: 4001.84

Add C.P & OH @15% on 4041.86 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 464.81 Rs 464.80

Item Code: 11.6.1 Cement plaster skirting (up to 30 cm height) with CM 1:3 finished with a floating coat of neat cement. 18 mm thick.

Code

Details of Cost for : 10.00 Sqm Unit Quantity

Description

Rate

MATERIALS: Cement mortar 1:3 = 0.205 cum + Add for rounding corners = 0.03cum = 0.235cum 03.008 0367 2209 0124 0115 0101 9999

Cement mortar 1:3 (1 cement : 3 coarse sand) Cement (For floating coat) Carriage of cement LABOUR: Mason II class Coolie Bhisthi Sundries

Cum tonne

0.235 0.02

4145.53 5000.00

tonne

0.02

77.87

1.88 1.88 0.54 19.76

273.00 247.00 260.00 1.49 Total: 2223.20

Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 2245.43 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 258.22 Rs 258.20

Item Code: 11.7 CC pavement with 1:2:4 with 20mm nominal size stone aggregate .... Code 04.001.03

0124 0114 0101 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS:P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Extra labour for laying in floors etc. Mason 2nd class Beldar Bhisti Sundries

Rate

Cum

1.00

4514.03

Day Day Day L.S.

0.35 0.18 0.05 19.76

273.00 247.00 260.00 1.49 Total: 182.45

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 184.27 Cost for 1.00 Cum Rate per One Cum:

DSR-12

Rs 4725.94

Page 398 of 2298

Rate as per DSR-12:

Rs 5269.10

Item Code: 11.8 Extra for making chequers on cement concrete floors etc Code 0124 0114 9999

Description LABOUR:Mason 2nd class Beldar Chequered plate etc.

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

0.36 0.36 13.52

Add water charges @ 1% on

Rate 273.00 247.00 1.49 Total: 207.34

Add C.P & OH @15% on 209.41 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 24.08 Rs 24.10

Item Code: 11.9.1 40 mm thick marble chips flooring under layer 34 mm thick cc 1:2:4 and top layer 6mm thick etc. complete : Dark shade pigment with ordinary cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS For under layer of 34mm thick 0296 Stone Aggregate (Single size): 12.5 mm nominal size cum 0.227 1050.00 0297 Stone Aggregate (Single size): 10 mm nominal size cum 0.076 1050.00 2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.303 87.60 0982 Coarse sand (zone III) cum 0.151 1120.00 2203 Carriage of Coarse sand cum 0.151 87.60 0367 Cement tonne 0.109 5000.00 0367 Cement for slurry tonne 0.02 5000.00 2209 Carriage of Cement tonne 0.129 77.87 For top layer 6mm thick 0785 Marble chips quint 0.872 180.00 2268 Carriage of Marble chips cum 0.051 87.60 0367 Portland Cement tonne 0.0405 5000.00 2209 Carriage of white Cement tonne 0.0405 77.87 0784 Marble powder cum 0.007 1000.00 0874 Dark shade pigmeny/3.5kg/ 50kg of cement kilog 2.84 55.00 = 40.5x3.5/50=2.84kg. 9999 Carriage of pigment & marble powder etc. L.S. 3.64 1.49 LABOUR:0124 Mason 2nd class Day 1.79 273.00 0114 Beldar Day 1.99 247.00 0101 Bhisti Day 1.04 260.00 0139 Skilled Beldar (for floor rubbing etc.) Day 1.00 260.00 0127 Mixer operator Day 0.03 301.00 0002 Mixer Day 0.03 800.00 0013 Machine for rubbing of floors Day 1.60 300.00 9999 Sundries L.S. 161.46 1.49 Total: Add water charges @ 1% on 3982.00 Add C.P & OH @15% on 4021.82 Cost for 10.00 Sqm

DSR-12

Page 399 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 462.51 Rs 462.50

Item Code: 11.9.2 40 mm thick marble chips flooring under layer 34 mm thick cc 1:2:4 and top layer 6mm thick etc. complete : Light shade pigment with white cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate 11.009.01 40 mm thick marble chips flooring under layer 34 mm thick cc 10.00 462.51 1:2:4 and top layer 6mm thick Add difference of cost due to using light shade pigment instead of dark shade pigment 0875 Add for light shade pigment kilog 2.84 70.00 0874 Deduct for dark shade pigment kilog -2.8484 55.00 Addd difference of cost due to using white cement instead of grey cement 0368 Add for White Cement tonne 0.0405 12000.00 0367 Deduct for grey cement tonne -0.0405 5000.00 Total: Add water charges @ 1% except on [A] i.e on 325.64 Add C.P & OH @15% except on [A] i.e on 328.90 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 500.33 Rs 500.40

Item Code: 11.9.3 40 mm thick marble chips flooring under layer 34 mm thick cc 1:2:4 and top layer 6mm thick etc. complete : Medium shade pigment with white cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate Details of cost for 10 sqm 11.009.01 40 mm thick marble chips flooring under layer 34 mm thick cc 10.00 462.51 1:2:4 and top layer 6mm thick Add difference of cost due to using light shade pigment instead of dark shade pigment 0876 Green or blue medium shade pigment kilog 2.84 60.00 0874 Deduct for dark shade pigment kilog -2.84 55.00 Add difference of cost due to using white Cement instead of grey cement 0368 Add for White Cement tonne 0.0203 12000.00 0367 Deduct for grey cement tonne -0.0203 5000.00 Total: Add water charges @ 1% except on [A] i.e on 156.30 Add C.P & OH @15% except on [A] i.e on 157.86 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 480.66 Rs 480.65

Item Code: 11.9.4 40 mm thick marble chips flooring under layer 34 mm thick cc 1:2:4 and top layer 6mm thick etc. complete : White cement without any pigment. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate

DSR-12

Page 400 of 2298

0296 0297 2202 0982 2203 0367 0367 2209 0785 2268 0368 2209 0784 0124 0114 0101 0139 0127 0002 0013 9999

MATERIALS For under layer of 34mm thick Stone Aggregate (Single size): 12.5 mm nominal size Stone Aggregate (Single size): 10 mm nominal size Carriage of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carriage of Coarse sand Cement Cement for slurry Carriage of Cement For top layer 6mm thick Marble chips Carriage of Marble chips White Cement Carriage of white Cement Marble powder LABOUR:Mason 2nd class Beldar Bhisti Skilled Beldar (for floor rubbing etc.) Mixer operator Mixer Machine for rubbing of floors Sundries

cum cum cum cum cum tonne tonne tonne

0.227 0.076 0.303 0.151 0.151 0.109 0.02 0.129

1050.00 1050.00 87.60 1120.00 87.60 5000.00 5000.00 77.87

quint cum tonne tonne cum

0.958 0.056 0.0405 0.0405 0.007

180.00 87.60 12000.00 77.87 1000.00

Day Day Day Day Day Day Day L.S.

1.79 1.99 1.04 1.00 0.03 0.03 1.60 161.46

273.00 247.00 260.00 260.00 301.00 800.00 300.00 1.49 Total: 4119.80

Add water charges @ 1% on

Add C.P & OH @15% on 4161.00 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 478.52 Rs 478.50

Item Code: 11.9.5 40mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34mm thick CC 1:2:4 and top layer 6mm thick with marble chips Light shade pigment with ordinary cement

Code 11.009.01

0875 0874

Details of Cost for : 10.00 Sqm Description Unit Quantity 40 mm thick marble chips flooring under layer 34 mm thick cc 10.00 1:2:4 and top layer 6mm thick Add difference of cost due to using light shade pigment instead of dark shade pigment Add for light shade pigment kilog 2.84 Deduct for dark shade pigment kilog -2.84 Add water charges @ 1% except on [A] i.e on

Rate 462.51

70.00 55.00 Total: 42.60

Add C.P & OH @15% except on [A] i.e on 43.03 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 467.46 Rs 467.45

Item Code: 11.9.6

DSR-12

Page 401 of 2298

40mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34mm thick CC 1:2:4 and top layer 6mm thick with marble chips Ordinary cement without any pigment

Code 11.009.01 0874 9999

Details of Cost for : 10.00 Sqm Description Unit Quantity 40 mm thick marble chips flooring under layer 34 mm thick cc 10.00 1:2:4 and top layer 6mm thick Deduct for dark shade pigment kilog -2.84 Deduct for carriage of pigment L.S. -7.38 Add water charges @ 1% except on [A] i.e on

Rate 462.51 55.00 1.49 Total: -167.20

Add C.P & OH @15% except on [A] i.e on -168.87 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 443.09 Rs 443.10

Item Code: 11.10.1 40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm thick with marble chips Dark shade pigment with ordinary cement

Code

0296 0297 2202 0982 2203 0367 0367 2209 0788 2268 0367 2209 0784 0874 9999 0124 0114 0101 0139 0127 0002 0013 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIAL For under layer of 31mm thick Stone Aggregate (Single size): 12.5 mm nominal size Stone Aggregate (Single size): 10 mm nominal size Carriage of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carriage of Coarse sand Cement Cement for slurry Carriage of Cement For top layer 9mm thick Marble chips large size above 4 mm White & black Carriage of Marble chips Portland Cement Carriage of white Cement Marble powder Dark shade pigment 3.5kg/ 50kg of cement = 57.80x3.5/50=4.05kg. Carriage of pigment & marble powder etc. LABOURMason 2nd class Beldar Bhisti Skilled Beldar (for floor rubbing etc.) Mixer operator Mixer Machine for rubbing of floors Sundries

Rate

cum cum cum cum cum tonne tonne tonne

0.21 0.07 0.28 0.14 0.14 0.1005 0.02 0.1205

1050.00 1050.00 87.60 1120.00 87.60 5000.00 5000.00 77.87

quint cum tonne tonne cum kilog

1.40 0.082 0.0578 0.0578 0.012 4.05

180.00 87.60 5000.00 77.87 1000.00 55.00

L.S.

5.46

1.49

Day Day Day Day Day Day Day L.S.

1.79 1.99 1.04 1.00 0.03 0.03 1.60 134.55

273.00 247.00 260.00 260.00 301.00 800.00 300.00 1.49 Total: 4119.15

Add water charges @ 1% on

Add C.P & OH @15% on 4160.34 Cost for 10.00 Sqm Rate per One Sqm:

DSR-12

Rs 478.44

Page 402 of 2298

Rate as per DSR-12:

Rs 478.45

Item Code: 11.10.2 40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm thick with marble chips Light shade pigment with white cement.

Code 11.010.01

0875 0874

0368 0367

Description 40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 Add difference of cost due to using light shade pigment instead of dark shade pigment Add for light shade pigment Deduct for dark shade pigment Add difference of cost due to using white cement instead of grey cement Add for White Cement Deduct for grey cement

Details of Cost for : 10.00 Sqm Unit Quantity 10.00

kilog kilog

tonne tonne

Rate 478.44

4.05 -4.05

70.00 55.00

0.0578 -0.0578

12000.00 5000.00 Total: 465.35

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 470.00 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 532.49 Rs 532.50

Item Code: 11.10.3 40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm thick with marble chips Medium shade pigment with 50 % white cement and 50 % ordinary cement.

Code 11.010.01

0876 0874

0368 0367

Description 40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 Add difference of cost due to using light shade pigment instead of dark shade pigment Green or blue medium shade pigment Deduct for dark shade pigment Add difference of cost due to using white cement instead of grey cement Add for White Cement Deduct for grey cement

Details of Cost for : 10.00 Sqm Unit Quantity 10.00

kilog kilog

tonne tonne

Rate 478.44

4.05 -4.05

60.00 55.00

0.0289 -0.0289

12000.00 5000.00 Total: 222.55

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 224.78 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 504.29 Rs 504.30

Item Code: 11.10.4 40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm thick with marble chips White cement without any pigment. Details of Cost for : 10.00 Sqm

DSR-12

Page 403 of 2298

Code

0296 0297 2202 0982 2203 0367 0367 2209 0788 2268 0368 2209 0784 0124 0114 0101 0139 0127 0002 0013 9999

Description MATERIALS FOR UNDER LAYER OF 31MM THICK Stone Aggregate (Single size): 12.5 mm nominal size Stone Aggregate (Single size): 10 mm nominal size Carriage of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carriage of Coarse sand Cement Cement for slurry Carriage of Cement FOR TOP LAYER 9MM THICK Marble chips large size above 4 mm White & black Carriage of Marble chips White Cement Carriage of white Cement Marble powder LABOUR:Mason 2nd class Beldar Bhisti Skilled Beldar (for floor rubbing etc.) Mixer operator Mixer Machine for rubbing of floors Sundries

Unit

Quantity

Rate

cum cum cum cum cum tonne tonne tonne

0.21 0.07 0.28 0.14 0.14 0.1005 0.02 0.1205

1050.00 1050.00 87.60 1120.00 87.60 5000.00 5000.00 77.87

quint cum tonne tonne cum

1.40 0.082 0.0578 0.0578 0.012

180.00 87.60 12000.00 77.87 1000.00

Day Day Day Day Day Day Day L.S.

1.79 1.99 1.04 1.00 0.03 0.03 1.60 161.46

273.00 247.00 260.00 260.00 301.00 800.00 300.00 1.49 Total: 4332.96

Add water charges @ 1% on

Add C.P & OH @15% on 4376.29 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 503.27 Rs 503.25

Item Code: 11.10.5 40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm thick with marble chips Light shade pigment with ordinary cement.

Code 11.010.01

0875 0874

Details of Cost for : 10.00 Sqm Description Unit Quantity Details of cost for 10 sqm 40mm thick marble chips flooring, rubbed and polished to 10.00 granolithic finish, under layer 3 Add difference of cost due to using light shade pigment instead of dark shade pigment Add for light shade pigment kilog 4.05 Black colour dark shade pigment kilog -4.05 Add water charges @ 1% except on [A] i.e on

Rate 478.44

70.00 55.00 Total: 60.75

Add C.P & OH @15% except on [A] i.e on 61.36 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 485.50 Rs 485.50

Item Code: 11.10.6

DSR-12

Page 404 of 2298

40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm thick with marble chips Ordinary cement without any pigment.

Code

0296 0297 2202 0982 2203 0367 0367 2209 0788 2268 0367 2209 0784 0124 0114 0101 0139 0127 0002 0013 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS For under layer 31mm thick Stone Aggregate (Single size): 12.5 mm nominal size Stone Aggregate (Single size): 10 mm nominal size Carriage of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carriage of Coarse sand Cement Cement for slurry Carriage of Cement For top layer 9mm thick Marble chips large size above 4 mm White & black Carriage of Marble chips Cement Carriage of White Cement Marble powder LABOUR:Mason 2nd class Beldar Bhisti Skilled Beldar (for floor rubbing etc.) Mixer operator Mixer Machine for rubbing of floors Sundries

Rate

cum cum cum cum cum tonne tonne tonne

0.21 0.07 0.28 0.14 0.14 0.1005 0.02 0.1205

1050.00 1050.00 87.60 1120.00 87.60 5000.00 5000.00 77.87

quint cum tonne tonne cum

1.40 0.082 0.0578 0.0578 0.012

180.00 87.60 5000.00 77.87 1000.00

Day Day Day Day Day Day Day L.S.

1.79 1.99 1.04 1.00 0.03 0.03 1.60 134.55

273.00 247.00 260.00 260.00 301.00 800.00 300.00 1.49 Total: 3888.26

Add water charges @ 1% on

Add C.P & OH @15% on 3927.14 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 451.62 Rs 451.60

Item Code: 11.11.1 40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Dark shade with ordinary cement . Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALSFor under layer 0128mm thick 0296 12.5mm stone aggregate cum 0.19 1050.00 0297 10mm stone aggregate cum 0.06 1050.00 2202 Carriage of stone aggregate cum 0.25 87.60 0982 Coarse sand cum 0.125 1120.00 2203 Carriage of coarse sand cum 0.125 87.60 0367 Portland Cement tonne 0.0897 5000.00 0367 Cement for slurry tonne 0.02 5000.00 2209 Carriage of cement tonne 0.1097 77.87 For top layer 12mm thick 0788 Marble chips 7mm to 10mm size quint 1.734 180.00 2268 Carriage of marble chips cum 0.102 87.60 0367 Cement tonne 0.081 5000.00 2209 Carriage of cement tonne 0.081 77.87

DSR-12

Page 405 of 2298

0784 0874 9999 0124 0114 0101 0139 0127 0002 0013 9999

Marble powder Dark shade pigment @ 3.5kg/50kg of cement = 81x3.5/50=5.67kg Carriage of pigment and marble powder etc. LABOUR:Mason 2nd class Beldar Bhisti Beldar for rubbing and polishing (Special Rate) Mixer operator Mixer Machine Sundries

cum kilog

0.017 5.67

1000.00 55.00

L.S.

6.24

1.49

Day Day Day Day Day Day Day L.S.

1.79 1.99 1.04 1.00 0.03 0.03 1.60 156.13

273.00 247.00 260.00 260.00 301.00 800.00 300.00 1.49 Total: 4319.17

Add water charges @ 1% on

Add C.P & OH @15% on 4362.36 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 501.67 Rs 501.65

Item Code: 11.11.2 40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Light shade with white cement Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate 11.011.01 40mm marble chips flooring under layer 28mm CC 1:2:4 top 10.00 501.67 layer 12mm with chips laid in cem (A) Add difference of cost due to using light shade pigment instead of dark shade pigment 0875 Add for Light shade pigment kilog 5.67 70.00 0874 Deduct for Dark shade pigment kilog -5.67 55.00 Add Difference of cost due to using white cement instead of grey cement 0368 Add for White cement tonne 0.081 12000.00 0367 Deduct for Grey cement tonne -0.081 5000.00 Total: Add water charges @ 1% except on [A] i.e on 652.05 Add C.P & OH @15% except on [A] i.e on 658.57 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 577.41 Rs 577.40

Item Code: 11.11.3 40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Medium shade (Appox) 50 % White 50 % ordinary cement . Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate 11.011.01 40mm marble chips flooring under layer 28mm CC 1:2:4 top 10.00 501.67 layer 12mm with chips laid in cem Add difference of cost due to using Medium shade pigment instead of dark shade pigment 0876 Add for Medium shade pigment kilog 5.67 60.00 0874 Deduct for Dark shade pigment kilog -5.67 55.00

DSR-12

Page 406 of 2298

0368 0367

Add Difference of cost due to using white cement instead of grey cement Add for White cement tonne Deduct for Grey cement tonne

0.0405 -0.0405

Add water charges @ 1% except on [A] i.e on

12000.00 5000.00 Total: 311.85

Add C.P & OH @15% except on [A] i.e on 314.97 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 537.89 Rs 537.85

Item Code: 11.11.4 40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 White cement without any pigment . Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALSFor under layer of 128mm thick 0296 12.5mm stone aggregate cum 0.19 1050.00 0297 10mm stone aggregate cum 0.06 1050.00 2202 Carriage of stone aggregate cum 0.25 87.60 0982 Coarse sand cum 0.125 1120.00 2203 Carriage of coarse sand cum 0.125 87.60 0367 Cement tonne 0.0897 5000.00 0367 Cement for slurry tonne 0.02 5000.00 2209 Carriage of cement tonne 0.1097 77.87 For top layer 12mm thick 0788 Marble chips 7mm to 10mm size quint 1.916 180.00 2268 Carriage of marble chips cum 0.1128 87.60 0368 Cement tonne 0.081 12000.00 2209 Carriage of cement tonne 0.081 77.87 0784 Marble powder cum 0.017 1000.00 LABOUR:0124 Mason 2nd class Day 1.79 273.00 0114 Beldar Day 1.99 247.00 0101 Bhisti Day 1.04 260.00 0139 Beldar for rubbing and polishing (Special Rate) Day 1.00 260.00 0127 Mixer operator Day 0.03 301.00 0002 Mixer Day 0.03 800.00 0013 Machine Day 1.60 300.00 9999 Sundries L.S. 134.55 1.49 Total: Add water charges @ 1% on 4566.57 Add C.P & OH @15% on 4612.24 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 530.41 Rs 530.40

Item Code: 11.11.5 40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Light shade pigment with Ordinary cement . Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate

DSR-12

Page 407 of 2298

11.011.01

0875 0874

40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cem Add difference of cost due to using Light shade pigment instead of dark shade Pigment kilog Add for Light shade pigment kilog

10.00

501.67

5.67 -5.67

70.00 55.00 Total: 85.05

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 85.90 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 511.55 Rs 511.55

Item Code: 11.11.6 40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Ordinary cement without any pigment . Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALSFor under layer 28mm thick 0296 12.5mm stone aggregate cum 0.19 1050.00 0297 10mm stone aggregate cum 0.06 1050.00 2202 Carriage of stone aggregate cum 0.25 87.60 0982 Coarse sand cum 0.125 1120.00 2203 Carriage of coarse sand cum 0.125 87.60 0367 Cement tonne 0.0897 5000.00 0367 Cement for slurry tonne 0.02 5000.00 2209 Carriage of cement tonne 0.1097 77.87 For top layer 12mm thick 0788 Marble chips 7mm to 10mm size quint 1.916 180.00 2268 Carriage of marble chips cum 0.1128 87.60 0367 Cement tonne 0.081 5000.00 2209 Carriage of cement tonne 0.081 77.87 0784 Marble powder cum 0.017 1000.00 LABOUR:0124 Mason 2nd class Day 1.79 273.00 0114 Beldar Day 1.99 247.00 0101 Bhisti Day 1.04 260.00 0139 Beldar for rubbing and polishing (Special Rate) Day 1.00 260.00 0127 Mixer operator Day 0.03 301.00 0002 Mixer Day 0.03 800.00 0013 Machine Day 1.60 300.00 9999 Sundries L.S. 134.55 1.49 Total: Add water charges @ 1% on 3999.57 Add C.P & OH @15% on 4039.57 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 464.55 Rs 464.55

Item Code: 11.12.1.1 Marble chips skirting (up to 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : Dark shade pigment with ordinary cement. Details of Cost for : 10.00 Sqm

DSR-12

Page 408 of 2298

Code

03.008

0785 2268 0367 2209 0784 0874 9999 0124 0114 0101 0139 9999

Description MATERIALSFor under layer of 12mm thick Cement mortar 1:3 (1 cement : 3 coarse sand) rounding = 0.03 =0.174 cum (Rate as per item No.3.8) Top layer 6mm thick Marble chips Carriage of marble chips Cement Carriage of cement Marble powder Dark shade pigment @ 3.5kg/50kg of cement =40.5x3.5/50=2.84kg. Carriage of pigment & marble powder etc. LABOUR:Mason 2nd class Beldar Bhisti Beldar for rubbing and polishing (Special Rate) Sundries

Unit

Quantity

Rate

0.174

4145.53

0.872 0.051 0.0405 0.0405 0.007 2.84

180.00 87.60 5000.00 77.87 1000.00 55.00

L.S.

3.64

1.49

Day Day Day Day L.S.

3.00 3.00 1.00 7.00 201.89

273.00 247.00 260.00 260.00 1.49 Total: 5197.84

quint cum tonne tonne cum kilog

Add water charges @ 1% on

Add C.P & OH @15% on 5249.82 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 603.73 Rs 603.75

Item Code: 11.12.1.2 Marble chips skirting (up to 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : Light shade pigment with white cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate (A) Details of cost for 10 sqm. 11.012.01.1 Marble chips skirting (up to 30 cm height) 18 mm thick with 10.00 603.73 under layer 12 mm thick in cem Add difference of cost due to using light shade pigment instead of dark shade pigment 0875 Add for Light shade pigment kilog 2.84 70.00 0874 Deduct for Dark shade pigment kilog -2.84 55.00 Add Difference of cost due to using white cement instead of grey cement 0368 Add for White cement tonne 0.0405 12000.00 0367 Deduct for Grey cement tonne -0.0405 5000.00 Total: Add water charges @ 1% except on [A] i.e on 326.10 Add C.P & OH @15% except on [A] i.e on 329.36 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 641.61 Rs 641.65

Item Code: 11.12.1.3 Marble chips skirting (up to 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : Medium shade pigment with white cement. Details of Cost for : 10.00 Sqm

DSR-12

Page 409 of 2298

Code Description 11.012.01.1 Marble chips skirting (up to 30 cm height) 18 mm thick with under layer 12 mm thick in cem Add difference of cost due to using medium shade pigment instead of dark shade pigment 0876 Green or blue medium shade pigment 0874 Deduct for Dark shade pigment Add Difference of cost due to using white cement instead of grey cement 0368 Add for White cement 0367 Deduct for Grey cement

Unit

Quantity 10.00

Rate 603.73

kilog kilog

2.84 -2.84

60.00 55.00

0.0203 -0.0203

12000.00 5000.00 Total: 156.30

tonne tonne

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 157.86 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 621.88 Rs 621.90

Item Code: 11.12.1.4 Marble chips skirting .. 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : White cement without any pigment. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALSFor under layer of 12mm thick 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.174 4145.53 Top layer 6mm thick 0785 Marble chips quint 0.958 180.00 2268 Carriage of marble chips cum 0.056 87.60 0368 White cement tonne 0.0405 12000.00 2209 Carriage of white cement tonne 0.0405 77.87 0784 Marble powder cum 0.007 1000.00 LABOUR:0124 Mason 2nd class Day 3.00 273.00 0114 Beldar Day 3.00 247.00 0101 Bhisti Day 1.00 260.00 0139 Beldar for rubbing and polishing (Special Rate) Day 7.00 260.00 9999 Sundries L.S. 201.89 1.49 Total: Add water charges @ 1% on 5335.64 Add C.P & OH @15% on 5389.00 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 619.74 Rs 619.75

Item Code: 11.12.1.5 Marble chips skirting .. 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : Light shade pigment with Orinary cement . Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate 11.012.01.1 Marble chips skirting (up to 30 cm height) 18 mm thick with 10.00 603.73 under layer 12 mm thick in cem Add difference of cost due to using Light shade pigment instead of dark shade pigment

DSR-12

Page 410 of 2298

0875 0874

Add for Light shade pigment Deduct for Dark shade pigment

kilog kilog

2.84 -2.84

Add water charges @ 1% except on [A] i.e on

70.00 55.00 Total: 42.60

Add C.P & OH @15% except on [A] i.e on 43.03 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 608.68 Rs 608.70

Item Code: 11.12.1.6 Marble chips skirting (up to 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 Ordinary cement without any pigment. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate Details of cost for 10 sqm. 11.012.01.1 Marble chips skirting (up to 30 cm height) 18 mm thick with 10.00 603.73 under layer 12 mm thick in cem Less cost of dark shade pigment 0874 Deduct for dark shade pigment kilog -2.84 55.00 9999 Deduct for Carriage of pigment L.S. -7.38 1.49 Total: Add water charges @ 1% except on [A] i.e on -167.20 Add C.P & OH @15% except on [A] i.e on -168.87 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 584.31 Rs 584.35

Item Code: 11.13.1 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: Glass strip=10m Add 10% for wastage=1m Total=11m 1149 40x4 mm Glass Strips metre 11.00 9999 Sundries L.S. 2.73 LABOUR: 0124 Mason II class Day 0.25 0114 Beldar Day 0.25 9999 Sundries L.S. 13.52 Add water charges @ 1% on

Rate

9.00 1.49 273.00 247.00 1.49 Total: 253.21

Add C.P & OH @15% on 255.74 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 29.41 Rs 29.40

Item Code: 11.14 Extra laying terrazo flooring on staircase treads Details of Cost for : 10.00 Sqm

DSR-12

Page 411 of 2298

Code 0124 0114 0115

Description LABOURMason 2nd class Beldar Coolie

Unit

Quantity

Rate

Day Day Day

0.30 0.30 0.30

273.00 247.00 247.00 Total: 230.10

Add water charges @ 1% on

Add C.P & OH @15% on 232.40 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 26.73 Rs 26.75

Item Code: 11.15.1 Crazy marble stone flooring i/c filling the gaps with light shade pigment withwhite cement marble powder mixture, and under layer 25 mm thick CC 1 : 2 : 4 :- 18mm thick crazy marble stone white, black or as specified.

Code 11.007

0367 2209 0114

2710 0368 0784 0875 0785 2268 2209 9999 2216 0123 0114 0115 0139 9999 0101 0013

Description Under layer 25mm thick of cement CC pavement with 1:2:4 with 20mm nominal size stone aggregate .... (Rate same as in item no. 11.7) Cement slurry for subgrade and under large cement Carriage of cement Labour for applying cement slurry Beldar Top layer with marble pieces and gap filling with marble powder mixture Marble pieces for crazy flooring (Assume 70% of marble stone are and 30% of joint filer/mixture) 7.00sqmx0.02m = 0.14 cum 0.872x0.14/0.051 = 2.40q White cement Marble powder Light shade pigment @ 3.5kg/50kg of cement = 40.5x3.5/50=2.84kg Marble chips Carriage of marble chips Carriage of cement Carriage of pigment & marble powder Carriage of marble stone pieces Labour for finishing, polishing and fixingMason 1st class Beldar Coolie Beldar for rubbing and polishing (Special Rate) Sundries including carborandum etc. Bhisti Machine

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

0.25

4725.94

tonne tonne

0.04 0.04

5000.00 77.87

Day

0.50

247.00

quint tonne cum kilog

2.40 0.0405 0.007 2.84

130.00 12000.00 1000.00 70.00

quint cum tonne L.S. tonne

0.872 0.051 0.0405 3.64 0.24

180.00 87.60 77.87 1.49 77.87

Day Day Day Day L.S. Day Day

1.20 1.00 1.00 5.00 134.55 0.54 4.00

301.00 247.00 247.00 260.00 1.49 260.00 300.00 Total: 5215.18

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 5267.33 Cost for 10.00 Sqm Rate per One Sqm:

DSR-12

Rs 723.89

Page 412 of 2298

Rate as per DSR-12:

Rs 773.45

Item Code: 11.16.1 Precast terrazo tiles 22mm in floors on 20mm thick cement mortar 1:4 Light shades using white cement . Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS: 1201 Terrazo tiles including 10% wastage sqm 11.00 9999 Carriage of tiles L.S. 40.43 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). Cum 0.224 (Rate as per item No. 3.9) 0367

Grey cement for slurry @ 4.4Kg/sqm.

0368

White cement for grouting

2209 0875

Carraige of Cement Light shade pigment

0124 0115 0139 0101 0013 9999

LABOUR : Mason (brick layer) 2nd class Coolie Skilled Beldar (for floor rubbing etc.) Bhisti Machine for rubbing of floors Sundries including carborandum stone etc.

Rate

240.00 1.49 3485.41

tonne

0.044

5000.00

tonne tonne

0.044 0.088

12000.00 77.87

kilog

3.08

70.00

Day Day Day Day Day

1.60 2.00 1.00 1.00 1.60

273.00 247.00 260.00 260.00 300.00

L.S.

161.98

1.49 Total: 6623.57

Add water charges @ 1% on

Add C.P & OH @15% on 6689.81 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 769.33 Rs 769.35

Item Code: 11.16.2 Precast terrazo tiles 22mm thick laid in floors, and landings, on 20mm thick bed of cement mortar 1:4 Medium shade using 50%white cement and 50% ordinary cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS1202 Terrazo tiles including 10% wastage sqm 11.00 220.00 9999 Carriage of tiles L.S. 40.43 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.224 3485.41 (Rate as per item No. 3.9) Grey cement (i) for slurry @ 4.4Kg/sqm =44kg + (ii) 50% for grouting = 22kg. Total =66kg or 0.066 tonne 0367 Grey cement tonne 0.066 5000.00 0368 50% white cement for grouting tonne 0.022 12000.00 2209 Carriage of cement tonne 0.088 77.87 0876 Medium shade pigment kilog 3.08 60.00 LABOUR 0124 Mason 2nd class Day 1.60 273.00 0115 Coolie Day 2.00 247.00 0139 Beldar for rubbing and polishing (Special Rate) Day 1.00 260.00

DSR-12

Page 413 of 2298

0101 0013 9999

Bhisti Machine Sundries including carborandum stone etc.

Day Day L.S.

1.00 1.60 161.98

Add water charges @ 1% on

260.00 300.00 1.49 Total: 6218.77

Add C.P & OH @15% on 6280.96 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 722.31 Rs 722.30

Item Code: 11.16.3 Precast terrazo tiles 22mm thick in floors, and landings,on 20mm thick bed of cement mortar 1:4 Dark shade using ordinary cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS1203 Terrazo tiles including 10% wastage sqm 11.00 200.00 9999 Carriage of tiles L.S. 40.43 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.224 3485.41 Rate as per item No. 3.9 Ordinary cement for(i) Cement slurry @ 4.4kg/sqm = 44kg+ (ii) Grouting = 44 kg. Total - 88kg or 0.088 tonne 0367 Ordinary cement tonne 0.088 5000.00 2209 Carriage of cement tonne 0.088 77.87 0874 Dark shade pigment kilog 3.08 55.00 LABOUR 0124 Mason 2nd class Day 1.60 273.00 0115 Coolie Day 2.00 247.00 0139 Beldar for rubbing and polishing (Special Rate) Day 1.00 260.00 0101 Bhisti Day 1.00 260.00 0013 Machine Day 1.60 300.00 9999 Sundries including carborandum stone etc. L.S. 161.98 1.49 Total: Add water charges @ 1% on 5829.37 Add C.P & OH @15% on 5887.66 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 677.08 Rs 677.10

Item Code: 11.16.4 Precast terrazo tiles 22mm thick laid in floors, and landings, on 20mm thick bed of cement mortar 1:4 Ordinary cement without any pigment. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS1203 Terrazo tiles including 10% wastage sqm 11.00 200.00 9999 Carriage of tiles L.S. 40.43 1.49 Cement mortar 1:4(1Cement: 4 Coarse sand) 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.224 3485.41 Ordinary cement for (i) Cement slurry @ 4.4kg/sqm = 44kg+ (ii) Grouting = 44 kg.Total = 88kg or 0.088 tonne 0367 Ordinary cement tonne 0.088 5000.00 2209 Carriage of cement tonne 0.088 77.87

DSR-12

Page 414 of 2298

0874 0124 0115 0139 0101 0013 9999 0874

Dark shade pigment LABOUR Mason 2nd class Coolie Beldar for rubbing and polishing (Special Rate) Bhisti Machine Sundries including carborandum stone etc. Less for dark shade pigment [3.08+2.84(for

kilog

3.08

55.00

Day Day Day Day Day L.S. kilog

1.60 2.00 1.00 1.00 1.60 161.98 -5.92

273.00 247.00 260.00 260.00 300.00 1.49 55.00 Total: 5503.77

Add water charges @ 1% on

Add C.P & OH @15% on 5558.81 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 639.26 Rs 639.25

Item Code: 11.17 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Code 0124 0115 0139

Description LABOUR: Mason II class Coolie Skilled Beldar

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day

0.22 0.22 0.65

Add water charges @ 1% on

Rate 273.00 247.00 260.00 Total: 283.40

Add C.P & OH @15% on 286.23 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 32.92 Rs 32.90

Item Code: 11.18.1 Precast terrazo tiles 22 mm thick in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 Light shade using white cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 1201 Terrazo tiles light shade using white cement 20mm thic sqm 11.00 240.00 9999 Sundries L.S. 40.43 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum 0.144 4145.53 0368 White cement tonne 0.066 12000.00 2209 Carriage of cement tonne 0.066 77.87 0875 Light shade pigment kilog 4.62 70.00 LABOUR: 0124 Mason II class Day 3.25 273.00 0115 Coolie Day 3.25 247.00 0139 Skilled Beldar Day 7.60 260.00 9999 Sundries L.S. 161.46 1.49 Total: Add water charges @ 1% on 8324.32 Add C.P & OH @15% on 8407.56 Cost for 10.00 Sqm

DSR-12

Page 415 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 966.87 Rs 966.85

Item Code: 11.18.2 Precast terrazo tiles 22 mm thick in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 Medium shades using 50% white cement and 50% ordinary cement.

Code 1202 9999 03.008 0368 0367 2209 0876 0124 0115 0139 9999

Description

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

MATERIALS: Precast Terrazo tiles 22mm thick (medium shade) Sundries Cement mortar 1:3 (1 cement : 3 coarse sand) White cement Cement Carriage of cement Medium shade pigment LABOUR: Mason II class Coolie Skilled Beldar

sqm L.S. Cum tonne tonne tonne kilog

11.00 40.43 0.144 0.033 0.033 0.066 4.62

220.00 1.49 4145.53 12000.00 5000.00 77.87 60.00

Day Day Day

3.25 3.25 7.60

273.00 247.00 260.00

L.S.

161.46

1.49 Total: 7827.12

Add water charges @ 1% on

Add C.P & OH @15% on 7905.39 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 909.12 Rs 909.10

Item Code: 11.18.3 Precast terrazo tiles 22 mm thick in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 Dark shade using ordinary cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS1203 Precast terrazzo tiles 22 mm thick (dark shade) sqm 11.00 200.00 including wastage & breakage 9999 Carriage of tiles L.S. 40.43 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.144 4145.53 Rate as per item No. 3.8 0367 Grey cement for slurry tonne 0.066 5000.00 2209 Carriage of cement tonne 0.066 77.87 0874 Dark shade pigment kilog 4.62 55.00 Labour0124 Mason 2nd class Day 3.25 273.00 0115 Coolie Day 3.25 247.00 0139 Beldar for rubbing and polishing (Special Day 7.60 260.00 Rate) 9999 Sundries including carborandum stone and L.S. 161.46 1.49 Total: Add water charges @ 1% on 7353.02

DSR-12

Page 416 of 2298

Add C.P & OH @15% on 7426.55 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 854.05 Rs 854.05

Item Code: 11.18.4 Precast terrazo tiles 22 mm thick in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 Ordinary cement without any pigment. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 1203 Terrazo tiles 22m thick sqm 11.00 200.00 9999 Sundries L.S. 40.43 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum 0.144 4145.53 0367 Cement tonne 0.066 5000.00 0874 Dark Shade Pigment kilog 4.62 55.00 2209 Carraige of Cement tonne 0.066 77.87 LABOUR: 0124 Mason II class Day 3.25 273.00 0115 Coolie Day 3.25 247.00 0139 Skilled Beldar Day 7.60 260.00 9999 Sundries L.S. 161.46 1.49 0874 Less Dark Shade Pigment [4.62+2.84] for tiles kilog -7.46 55.00 Total: Add water charges @ 1% on 6942.72 Add C.P & OH @15% on 7012.15 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 806.40 Rs 806.40

Item Code: 11.19.1 Chquered precast terrazo tiles 22mm in floors on 20mm thick CM 1:4 Light shade using white cement . Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS1227 Terrazo tiles including 10% wastage sqm 11.00 300.00 9999 Carriage of tiles L.S. 40.43 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). Cum 0.224 3485.41 0367 Grey cement for slurry @ 4.4kg/sqm. tonne 0.044 5000.00 0368 White cement for grouting tonne 0.044 12000.00 2209 Carriage of cement tonne 0.088 77.87 0875 Light shade pigment kilog 3.08 70.00 LABOUR0124 Mason 2nd class Day 1.60 273.00 0115 Coolie Day 2.00 247.00 0139 Beldar for rubbing and polishing (Special Rate) Day 1.00 260.00 0101 Bhisti Day 1.00 260.00 0013 Machine Day 1.60 300.00 9999 Sundries including carborandum stone etc. L.S. 161.98 1.49 Total: Add water charges @ 1% on 7283.57 Add C.P & OH @15% on 7356.41 Cost for 10.00 Sqm

DSR-12

Page 417 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 845.99 Rs 846.00

Item Code: 11.19.2 Chquered precast terrazo tiles 22mm in floors on 20mm thick CM 1:4 Medium shade using 50% white and 50 % ordinary cement .

Code 1228 9999 03.009

0367 0368 2209 0876 0124 0115 0139 0101 0013 9999

Description MATERIALSTerrazo tiles including 10% wastage Carriage of tiles Rate as per item No. 3.9 Cement mortar 1:4 (1 cement : 4 coarse sand). Grey cement (i) for slurry @ 4.4kg/sqm =44 kg.+ (ii) 50% for grouting = 22kg. Total =66kg or 0.066 tonne Grey cement 50% white cement for grouting Carriage of cement Medium shade pigment Labour and sundries Mason 2nd class Coolie Beldar for rubbing and polishing (Special Rate) Bhisti Machine Sundries including carborandum stone etc.

Details of Cost for : 10.00 Sqm Unit Quantity sqm L.S.

tonne tonne tonne kilog Day Day Day Day Day L.S.

Rate

11.00 40.43

260.00 1.49

0.224

3485.41

0.066 0.022 0.088 3.08

5000.00 12000.00 77.87 60.00

1.60 2.00 1.00 1.00 1.60 161.98

273.00 247.00 260.00 260.00 300.00 1.49 Total: 6658.77

Add water charges @ 1% on

Add C.P & OH @15% on 6725.36 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 773.42 Rs 773.40

Item Code: 11.19.3 Chquered precast terrazo tiles 22mm in floors on 20mm thick CM 1:4 Dark shade using ordinary cement . Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS1229 Terrazo tiles including 10% wastage sqm 11.00 9999 Carriage of tiles L.S. 40.43 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.224 Rate as per item No. 3.9 Ordinary cement for (i) Cement slurry @ 4.4kg/sqm = 44kg+

0367 2209 0874 0124 0115 0139 0101 0013 9999

DSR-12

(ii) Grouting = 44 kg.Total = 88kg or 0.088 tonne Ordinary cement Carriage of cement Dark shade pigment Labour & sundries Mason 2nd class Coolie Beldar for rubbing and polishing (Special Rate) Bhisti Machine Sundries including carborandum stone etc.

tonne tonne kilog Day Day Day Day Day L.S.

Rate 225.00 1.49 3485.41

0.088 0.088 3.08

5000.00 77.87 55.00

1.60 2.00 1.00 1.00 1.60 161.98

273.00 247.00 260.00 260.00 300.00 1.49

Page 418 of 2298

Add water charges @ 1% on

Total: 6104.37

Add C.P & OH @15% on 6165.41 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 709.02 Rs 709.00

Item Code: 11.19.4 Chquered precast terrazo tiles 22mm in floors on 20mm thick CM 1:4 Ordinary cement without shade Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS1229 Terrazo tiles including 10% wastage sqm 11.00 9999 Carriage of tiles L.S. 40.43 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.224 Rate as per item No. 3.9 Ordinary cement for (i) Cement slurry @ 4.4kg/sqm = 44kg+ (ii) Grouting = 44 kg.Total = 88kg or 0.088 tonne 0367 Ordinary cement tonne 0.088 2209 Carriage of cement tonne 0.088 0874 Dark shade pigment kilog 3.08 LABOUR & SUNDRIES 0124 Mason 2nd class Day 1.60 0115 Coolie Day 2.00 0139 Beldar for rubbing and polishing (Special Rate) Day 1.00 0101 Bhisti Day 1.00 0013 Machine Day 1.60 9999 Sundries including carborandum stone etc. L.S. 162.59 0874 Black colour dark shade pigment kilog -5.92 Add water charges @ 1% on

Rate 225.00 1.49 3485.41

5000.00 77.87 55.00 273.00 247.00 260.00 260.00 300.00 1.49 55.00 Total: 5779.68

Add C.P & OH @15% on 5837.48 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 671.31 Rs 671.30

Item Code: 11.20.1 Chequerred precast CC tiles 22mm thick in footpath and courtyard on 20mm thick bed of CM 1:4 Light shade using white cement.

Code 7070 9999 03.009 0367 0368 2209 0875 0124 0115 0101

DSR-12

Description MATERIALSChequerred C.C. tiles including 10% wastage Carriage of tiles Cement mortar 1:4 (1 cement : 4 coarse sand). Rate as per item no. 3.9 Grey cement slury @ 4.4kg @sqm, White cement for grouting Carriage of cement Light shade pigment LABOURMason 2nd class Coolie Bhisti

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

sqm L.S.

11.00 40.43 0.22

470.00 1.49 3485.41

tonne tonne tonne kilog

0.044 0.048 0.092 3.08

5000.00 12000.00 77.87 70.00

1.60 2.00 1.00

273.00 247.00 260.00

Day Day Day

Page 419 of 2298

Add water charges @ 1% on

Total: 8206.59

Add C.P & OH @15% on 8288.66 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 953.20 Rs 953.20

Item Code: 11.20.2 Chequerred precast CC tiles 22mm thick in footpath and courtyard on 20mm thick bed of CM 1:4 Medium shade using 50 % white cement 50 % grey cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS7237 Chequered cement concrete tiles i/c10% wastage sqm Sqm 11.00 360.00 9999 Carriage of tiles L.S. 40.43 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.22 3485.41 Rate as per item no. 3.9 Grey cement for slurry @ 4.4Kg/sqm. = 44 kg. 0367 + grey cement for grouting 2.4kg/sqm. = 24 kg. tonne 0.068 5000.00 Total = 68 kg. 0368 White cement for grouting @ 2.4kg/sqm. = 24 tonne tonne 0.024 12000.00 2209 Carriage of cement tonne 0.092 77.87 0876 Medium shade pigment kilog 3.08 60.00 LABOUR0124 Mason 2nd class Day 1.60 273.00 0115 Coolie Day 2.00 247.00 0101 Bhisti Day 1.00 260.00 Total: Add water charges @ 1% on 6797.79 Add C.P & OH @15% on 6865.77 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 789.56 Rs 789.55

Item Code: 11.20.3 Chequerred precast CC tiles 22mm thick in footpath and courtyard on 20mm thick bed of CM 1:4 Dark shade using ordinary cement. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS7236 Chequered cement concrete tiles 10% wastage sqm 11.00 230.00 9999 Carriage of tiles L.S. 40.43 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.22 3485.41 Rate as per item no. 3.9 Grey cement for slurry @ 4.4Kg/sqm. = 44 kg. 0367 + For grouting = 48 kg. Total=92 kg. say 0.092 tonne tonne 0.092 5000.00 2209 Carriage of cement tonne 0.092 77.87 0874 Dark shade pigment kilog 3.08 55.00 LABOUR0124 Mason 2nd class Day 1.60 273.00 0115 Coolie Day 2.00 247.00 0101 Bhisti Day 1.00 260.00 Total: Add water charges @ 1% on 5184.39

DSR-12

Page 420 of 2298

Add C.P & OH @15% on 5236.23 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 602.17 Rs 602.15

Item Code: 11.20.4 Chequerred precast CC tiles 22mm thick in footpath and courtyard on 20mm thick bed of CM 1:4 Ordinary cement without any pigment. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS7236 Chequerred C.C. tiles including 10% wastage sqm 11.00 230.00 9999 Carriage of tiles L.S. 40.43 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.22 3485.41 (Rate as per item No.3.9) Grey cement for slurry @ 4.4kg/sqm. = 44 kg 0367 For grouting = 48 kg. Total = 92 Kg. Say 0.092 tonne tonne 0.092 5000.00 2209 Carriage of cement tonne 0.092 77.87 0874 Dark shade pigment kilog 3.08 55.00 LABOUR0124 Mason 2nd class Day 1.60 273.00 0115 Coolie Day 2.00 247.00 0101 Bhisti Day 1.00 260.00 0874 Less for dark shade pigment [3.08+2.84(for tiles)] kilog -5.92 55.00 Total: Add water charges @ 1% on 4858.79 Add C.P & OH @15% on 4907.38 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 564.35 Rs 564.35

Item Code: 11.21.1.1 P/L 10mm thick acid or alkali resistant tiles in flooring bed of 10mm thick CM 1:4 Acid and alkali resistant tiles

Code

7077 9999 03.009 9999 0367

7024 0367 0123 0115 9999

DSR-12

Description

Details of Cost for : 1.00 Sqm Unit Quantity

MATERIALSAcid proof tiles of size 300x300mm, 10mm thick =11.11 nos+ Add wastage and breakage @ 2.5% = 0.28 nos. = 11.39 nos. Say 12 nos. Acid proof tiles 10 No Carriage L.S. Cement mortar 1:4 (1 cement : 4 coarse sand). Mortar for pointing in acid/alkali resistant cement L.S. Cement for slurry over bed @ 3.3kg per sqm. tonne Difference of cost for using acid proof cement instead of ordinary cement Acid proof cement tonne Less Ordinary Cement tonne LABOURMason 1 st class Day Coolie Day Sundries including carriage of cement etc. L.S.

Rate

12.00 6.24 0.012 40.43 0.0033

520.00 1.49 3485.41 1.49 5000.00

0.0079 -0.0079

8100.00 5000.00

0.20 0.20 26.91

301.00 247.00 1.49

Page 421 of 2298

Add water charges @ 1% on

Total: 926.05

Add C.P & OH @15% on 935.31 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1075.61 Rs 1075.60

Item Code: 11.21.2.1 P/L 10mm thick acid or alkali resistant tiles in dado/skirting 12mm thick CM 1:4 Acid and alkali resistant tiles

Code

Details of Cost for : 1.00 Sqm Unit Quantity

Description

Rate

MATERIALSAcid proof tiles of size 300x300mm, 10mm thick = 11.11nos.+

7077 9999 03.009

7024 0367 9999 7024 0123 0115 9999

Add wastage and breakage @ 2.5% = 0.28 nos. = 11.39 nos. Say 12 nos. Acid proof tiles size 300x300mm, 10mm thick 10 Nos 10 No Carriage of tiles L.S. Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item No 3.9) Difference of cost for using^acid proof cement instead of ordinary cement Acid proof cement tonne Less Ordinary Cement tonne Mortar for pointing in acid proof cement L.S. Acid proof cemen for slurry over plaster 3.3kg/sqm. tonne LABOURMason 1 class Day Coolie Day Sundries including carriage of cement etc. L.S.

12.00 6.24 0.014

520.00 1.49 3485.41

0.0086 -0.0086 40.43 0.0033

8100.00 5000.00 1.49 8100.00

0.25 0.25 26.91

301.00 247.00 1.49 Total: 972.83

Add water charges @ 1% on

Add C.P & OH @15% on 982.56 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1129.94 Rs 1129.95

Item Code: 11.22.1.1 Tile work in skirting risers and dado over 12mm thick cement mortar 1:3 jointed cement slurry Marble tiles (polished) Rajnagar : 8 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 2751 8 mm thick marble tiles (polished) Raj Nagar including sqm 1.061 340.00 wastage 9999 Carriage of tiles L.S. 3.90 1.49 12mm thick cement mortar 1:3(1 cement : 3 Coarse sand) 03.008 9999 0367 9999

DSR-12

Cement mortar 1:3 (1 cement : 3 coarse sand) Mortar for pointing in white cement Cement for slurry @3.3 kg/sqm Pigment LABOUR:

Cum L.S. tonne L.S.

0.014 25.35 0.0033 2.08

4145.53 1.49 5000.00 1.49

Page 422 of 2298

0123 0115 9999

Mason 1st class Coolie Sundries including carriage of cement etc.,

Day Day L.S.

0.25 0.25 16.90

Add water charges @ 1% on

301.00 247.00 1.49 Total: 644.14

Add C.P & OH @15% on 650.58 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 748.17 Rs 748.15

Item Code: 11.23.1 Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Makrana White Second quality.

Code

6001 03.009 0367

9999

0123 0114 0115 0139 0013 9999

Description MATERIALS18mm thick marble slab = 10.00sqm.+ Add for wastage 15% = 1.50sqm. Total = 11.50sqm. Makrana white 2nd quality 18 mm thick marble slab Cement mortar 1:4 (1 cement : 4 coarse sand). ( Rate as per item No. 3.9) Cement for slurry @4.4kg/sqm. (i) for bedding = 44 kg+ (ii) for jointing = 6 Kg. Total = 50 Kg. Carriage of marble slab LABOUR( for finishing, polishing and fixing) Mason 1st class Beldar Coolie Beldar for rubbing and polishing (Special Rate) Machine Sundries and carriage of cement etc.

Details of Cost for : 10.00 Sqm Unit Quantity

sqm

Rate

11.50 0.224

1850.00 3485.41

0.05

5000.00

L.S.

26.91

1.49

Day Day Day Day Day L.S.

1.20 1.00 1.00 5.00 4.00 134.55

301.00 247.00 247.00 260.00 300.00 1.49 Total: 25901.51

tonne

Add water charges @ 1% on

Add C.P & OH @15% on 26160.53 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3008.46 Rs 3008.45

Item Code: 11.23.2 Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Raj Nagar Plain. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS: 18mm thick marble slab = 10.00sqm.+ Add for wastage 15%= 1.50sqm. Total = 11.50sqm. 7071 03.009 0367

DSR-12

White marble Raj Nagar plain 20 mm thick (slab area 0.10 sqm sqm to 0.20 sqm) Cement mortar 1:4 (1 cement : 4 coarse sand). Cum Cement for slurry

Rate

11.50

545.00

0.224

3485.41

Page 423 of 2298

bedding = 44 kg+ (ii) for jointing = 6 Kg. Total = 50 Kg. tonne 9999

0.05

5000.00

L.S.

26.91

1.49

Day Day Day Day Day

1.20 1.00 1.00 5.00 4.00

301.00 247.00 247.00 260.00 300.00

L.S.

134.55

1.49 Total: 10894.01

Carriage of marble slab LABOUR : (for finishing, polishing and fixing)

0123 0114 0115 0139 0013 9999

Mason (brick layer) 1st class Beldar Coolie Skilled Beldar (for floor rubbing etc.) Machine for rubbing of floors Sundries and carriage of cement etc.

Add water charges @ 1% on

Add C.P & OH @15% on 11002.95 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1265.34 Rs 1265.35

Item Code: 11.23.3 Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Agaria white. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS18mm thick marble slab = 10.00sqm.+ Add for wastage 15% = 1.50sqm. Total = 11.50sqm. 7850 Marble Stone Slab 18mm thick ( Agaria White Spot less) sqm 11.50 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.224 (Rate as per item No. 3.9) 0367 Cement for slurry @4.4 kg/sqm. (i) for bedding = 44 kg+ (ii) for jointing = 6 Kg. tonne 0.05 Total = 50 Kg. 9999 Carriage of marble slab L.S. 26.91 LABOUR(for finishing, polishing and fixing) 0123 Mason 1 st class Day 1.20 0114 Beldar Day 1.00 0115 Coolie Day 1.00 0139 Beldar for rubbing and polishing (Special Rate) Day 5.00 0013 Machine Day 4.00 9999 Sundries and carriage of cement etc. L.S. 134.55 Add water charges @ 1% on

Rate

1090.00 3485.41

5000.00 1.49

301.00 247.00 247.00 260.00 300.00 1.49 Total: 17161.51

Add C.P & OH @15% on 17333.13 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1993.31 Rs 1993.30

Item Code: 11.23.4 Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Black Zebra.

DSR-12

Page 424 of 2298

Code

6019 03.009 0367

9999

0123 0114 0115 0139 0013 9999

Description MATERIALS18mm thick marble slab = 10.00sqm.+ Add for wastage 15% = 1.50sqm. Total = 11.50sqm. Makrana Dhobi Doongri 18mm thick marble slab Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item No. 3.9) Cement for slurry @ 4.4kg/sqm. (l) for bedding = 44 kg+ (ii) for jointing = 6 Kg. Total = 50 Kg. Carriage of marble slab LABOUR( for finishing, polishing and fixing) Mason 1 class Beldar Coolie Beldar for rubbing and polishing (Special Rate) Machine Sundries and carriage of cement etc.

Details of Cost for : 10.00 Sqm Unit Quantity

sqm

Rate

11.50 0.224

470.00 3485.41

0.05

5000.00

L.S.

26.91

1.49

Day Day Day Day Day L.S.

1.20 1.00 1.00 5.00 4.00 134.55

301.00 247.00 247.00 260.00 300.00 1.49 Total: 10031.51

tonne

Add water charges @ 1% on

Add C.P & OH @15% on 10131.83 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1165.16 Rs 1165.15

Item Code: 11.23.5 Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Udaipur green marble. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS18mm thick marble slab = 10.00sqm.+ Add for wastage 15% = 1.50sqm. Total = 11.50sqm. 6010 Udaipur green marble 18 mm thick marble slab sqm 11.50 660.00 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.224 3485.41 (Rate as per item No. 3.9) 0367 Cement for slurry @ 4.4kg/sqm . (i ) for bedding = 44 kg+ (ii) for jointing = 6 Kg. tonne 0.05 5000.00 Total = 50 Kg. 9999 Carriage of marble slab L.S. 26.91 1.49 LABOUR(for finishing, polishing and fixing) 0123 Mason 1st class Day 1.20 301.00 0114 Beldar Day 1.00 247.00 0115 Coolie Day 1.00 247.00 0139 Beldar for rubbing and polishing (Special Rate) Day 5.00 260.00 0013 Machine Day 4.00 300.00 9999 Sundries and carriage of cement etc. L.S. 134.55 1.49 Total: Add water charges @ 1% on 12216.51 Add C.P & OH @15% on 12338.68 Cost for 10.00 Sqm

DSR-12

Page 425 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 1418.95 Rs 1418.95

Item Code: 11.23.6 Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Pink Plain Marble. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS18mm thick marble slab = 10.00sqm.+ Add for wastage 15% = 1.50sqm. Total = 11.50sqm. 6007 Pink plain marble 18mm thick marble slab sqm 11.50 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.224 (Rate as per item No. 3.9) 0367 Cemen for slurry @4.4Kg/sqm (i)for bedding = 44 kg+ (ii) for jointing = 6 Kg. tonne 0.05 Total = 50 Kg. 9999 Carriage of marble slab L.S. 26.91 LABOUR(for finishing, polishing and fixing) 0123 Mason 1st class Day 1.20 0114 Beldar Day 1.00 0115 Coolie Day 1.00 0139 Beldar for rubbing and polishing (Special Rate) Day 5.00 0013 Machine Day 4.00 9999 Sundries and carriage of cement etc. L.S. 134.55 Add water charges @ 1% on

Rate

610.00 3485.41

5000.00 1.49

301.00 247.00 247.00 260.00 300.00 1.49 Total: 11641.51

Add C.P & OH @15% on 11757.93 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1352.16 Rs 1352.15

Item Code: 11.24 Extra for pre finished nosing to treads of steps of marble stone. Code 0126 0114 0139 9999

Description LABOURMason (Ornamental) marble stone Beldar Beldar for rubbing and polishing (Special Rate) Sundries

Details of Cost for : 10.00 m Unit Quantity Day Day Day L.S.

2.00 1.50 2.50 53.82

Add water charges @ 1% on

Rate 301.00 247.00 260.00 1.49 Total: 1702.69

Add C.P & OH @15% on 1719.72 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 197.77 Rs 197.75

Item Code: 11.25 Extra for marble stone floor in treads of steps and risers using single length upto 2 m. Details of Cost for : 10.00 Sqm Code Description Unit Quantity

DSR-12

Rate

Page 426 of 2298

0123 0114 0115 0139 9999

LABOURMason 1st class Beldar Coolie Beldar for rubbing and polishing (Special Rate) Sundries

Day Day Day Day L.S.

1.95 1.40 0.75 3.18 26.91

Add water charges @ 1% on

301.00 247.00 247.00 260.00 1.49 Total: 1984.90

Add C.P & OH @15% on 2004.75 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 230.55 Rs 230.55

Item Code: 11.26.1 Kota stone slab flooring over 20 mm (average) thick with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. Details of Cost for : 10.00 Sqm Unit Quantity

Code

Description

1168

MATERIALS: 25mm thick Kota stone slabs polished including 15% wastage

2216

Carriage of slabs

03.009 0367

Cement mortar 1:4 (1 cement : 4 coarse sand). Cement for slurry-(i) for bedding = 44kg+ (ii) for joints = 20 kg. Total = 64 kg. or 0.06 Carriage of cement Dark Shade Pigment LABOUR : Hire charges of machine for rubbing Mason II class Beldar Coolie Skilled Beldar (for floor rubbing etc.) Sundries

2209 0874 0013 0124 0114 0115 0139 9999

Rate

sqm

11.50

270.00

tonne Cum

0.67 0.224

77.87 3485.41

tonne tonne kilog

0.064 0.064 4.50

5000.00 77.87 55.00

4.00 1.20 1.00 1.00 5.00 208.13

300.00 273.00 247.00 247.00 260.00 1.49 Total: 8142.09

Day Day Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 8223.51 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 945.70 Rs 945.70

Item Code: 11.27 Kotah stone slab 25mm thick in risers steps skirting in CM 1 : 3 Code

Description

1168

MATERIALS: 25mm thick Kota stone slabs polished including 15% wastage

2216 03.008

DSR-12

Details of Cost for : 10.00 Sqm Unit Quantity

sqm Carraige of Stone blocks white & red sand stone & kota stone tonne slab Cement mortar 1:3 (1 cement : 3 coarse sand) Cum

Rate

11.50 0.67

270.00 77.87

0.144

4145.53

Page 427 of 2298

(Rate as per item No. 3.8) 0367

Cement for slurry

2209 0874

Carraige of Cement Pigment dark shade

0124 0114 0115 0139 9999

LABOURMason (brick layer) 2nd class Beldar Coolie Skilled Beldar (for floor rubbing etc.) Sundries

tonne tonne

0.064 0.064

5000.00 77.87

kilog

4.50

55.00

3.00 3.00 1.00 7.00 174.98

273.00 247.00 247.00 260.00 1.49 Total: 8214.33

Day Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 8296.47 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 954.09 Rs 954.10

Item Code: 11.28.1 40mm thick fine dressed stone flooring over 20mm thick base with CM 1:5 Red sand stone. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS Finished work = 10sqm Add wastage 10% =1.00sqm Total = 11.00 sqm 1164 Red sand stone slab 40 mmthick (un-dressed) sqm 11.00 9999 Carriage L.S. 34.06 03.010 Cement mortar 1:5 (1 cement : 5 coarse sand) 0.25 (Rate as per item No. 3.10) (i) for bedding = 0224 cum (ii) for joining = 0.026 cum. Total=0.250cum. LABOUR0123 Mason 1 st class Day 3.10 0100 Bandhani Day 1.10 0115 Coolie Day 0.55 0101 Bhisti Day 0.27 9999 Sundries L.S. 10.79 Add water charges @ 1% on

Rate

155.00 1.49 3129.96

301.00 260.00 247.00 260.00 1.49 Total: 3979.47

Add C.P & OH @15% on 4019.26 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 462.22 Rs 462.20

Item Code: 11.28.2 40mm thick fine dressed stone flooring over 20mm thick base with CM 1:5 White sand stone. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS White sand stone Finished work =10 sqm

DSR-12

Rate

Page 428 of 2298

1165 9999 03.010

0123 0100 0115 0101 9999

Add wastage 10% =1.00sqm Total = 11.00 sqm White sand stone slab 40 mm thick (un-dressed) Carriage Cement mortar 1:5 (1 cement : 5 coarse sand) (Rate as per item No. 3.10) (i) for bedding ).224cum+ (ii) for joining = 0.026 cum. Total=0.250cum. LABOURMason 1st class Bandhani Coolie Bhisti Sundries

sqm L.S.

11.00 34.06 0.25

170.00 1.49 3129.96

Day Day Day Day L.S.

3.10 1.10 0.55 0.27 10.79

301.00 260.00 247.00 260.00 1.49 Total: 4144.47

Add water charges @ 1% on

Add C.P & OH @15% on 4185.91 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 481.38 Rs 481.40

Item Code: 11.29.1 40mm thick fine dressed stone flooring over 20mm thick base of cement mortar 1:5 i/c pointing with CM 1:2 Red sand stone.

Code

1164 9999 03.010

03.012

0123 0100 0115 0101 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS Finished work 10 sqm Add wastage 10% =1.00sqm Total = 11.00 sqm Red sand stone slab 40 mm thick (un-dressed) Carriage Cement mortar 1:5 (1 cement : 5 coarse sand) Rate as per item No.3.10 (i) for bedding = 0.224 cum+(ii) for joining = 0.026 cum. Total=0.250cum. Cement Mortar 1:2 (1 cement : 2 stone dust) for pointing Rate as per item No.3.12 LABOURMason 1st class Bandhani Coolie Bhisti Sundries

sqm L.S.

Day Day Day Day L.S.

Rate

11.00 34.06 0.25

155.00 1.49 3129.96

0.023

4678.61

3.90 1.10 1.40 0.55 26.91

301.00 260.00 247.00 260.00 1.49 Total: 4634.65

Add water charges @ 1% on

Add C.P & OH @15% on 4681.00 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 538.32 Rs 538.30

Item Code: 11.29.2 40mm thick fine dressed stone flooring over 20mm thick base of cement mortar 1:5 i/c pointing with CM 1:2 White sand stone.

DSR-12

Page 429 of 2298

Code

1165 9999 03.010

03.012 0123 0100 0115 0101 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS Finished work = 10sqm Add wastage 10% =1.00sqm Total = 11.00 sqm White sand stone slab 40 mm thick (un-dressed) Carriage Cement mortar 1:5 (1 cement : 5 coarse sand) Rate as per item No.3.10 (i) for bedding = 0.224 cum+ (ii) for joining = 0.026 cum. Total=0.250cum. Cement Mortar 1:2 (1 cement : 2 stone dust) LABOURMason 1st class Bandhani Coolie Bhisti Sundries

sqm L.S.

Day Day Day Day L.S.

Rate

11.00 34.06 0.25

170.00 1.49 3129.96

0.023

4678.61

3.90 1.10 1.40 0.55 26.91

301.00 260.00 247.00 260.00 1.49 Total: 4799.65

Add water charges @ 1% on

Add C.P & OH @15% on 4847.65 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 557.48 Rs 557.50

Item Code: 11.30.1 40mm thick fine dressed and rubbed stone flooring over 20 mm thick base of CM 1:5 with joints 3mm thick, side buttered with CM 1:2 Red sand stone. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS Finished work 10 sqm Add wastage 10% = 1.00 sqm Total = 11.00 sqm 1164 Red sand stone slab 40 mmthick (un-dressed) sqm 11.00 155.00 9999 Carriage L.S. 34.06 1.49 03.010 Cement mortar 1:5 (1 cement : 5 coarse sand) 0.25 3129.96 Rate as per item No.3.10 (i) for bedding = 0.224 cum+ (ii) for joining = 0.026 cum. Total=0.250cum. 03.012 Cement Mortar 1:2 (1 cement : 2 stone dust) 0.023 4678.61 for pointing Rate as per item No.3.12 LABOUR0123 Mason 1st class Day 3.90 301.00 0100 Bandhani Day 1.10 260.00 0115 Coolie Day 1.40 247.00 0101 Bhisti Day 0.55 260.00 9999 Sundries L.S. 26.91 1.49 Labour for rubbing of stone 0139 Beldar for rubbing (special rate) Day 0.618 260.00 0013 Machine Day 0.988 300.00 Total: Add water charges @ 1% on 5091.73 Add C.P & OH @15% on 5142.65 Cost for 10.00 Sqm

DSR-12

Page 430 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 591.41 Rs 591.40

Item Code: 11.30.2 40mm thick fine dressed and rubbed stone flooring over 20 mm thick base of CM 1:5 with joints 3mm thick, side buttered with CM 1:2 White sand stone. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS Finished work 10 sqm Add wastage 10%= 1.00 sqm Total = 11.00 sqm 1165 White sand stone slab 40 mm thick (un-dressed) sqm 11.00 170.00 9999 Carriage L.S. 34.06 1.49 03.010 Cement mortar 1:5 (1 cement : 5 coarse sand) 0.25 3129.96 Rate as per item No. 3.10 (i) for bedding = 0.224 cum+ (ii) for joining = 0.026 cum. Total=0.250cum. 03.012 Cement Mortar 1:2 (1 cement : 2 stone dust) 0.023 4678.61 for pointing Rate as per item No. 3.12 LABOUR0123 Mason 1 st class Day 3.90 301.00 0100 Bandhani Day 1.10 260.00 0115 Coolie Day 1.40 247.00 0101 Bhisti Day 0.55 260.00 9999 Sundries L.S. 26.91 1.49 Labour for rubbing of stone 0139 Beldar for rubbing (special rate) Day 0.618 260.00 0013 Machine Day 0.988 300.00 Total: Add water charges @ 1% on 5256.73 Add C.P & OH @15% on 5309.30 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 610.57 Rs 610.55

Item Code: 11.31 Extra for pre finished nosing in treads of steps of kota stone/ sand stone slab. Details of Cost for : 10.00 Sqm Code Description Unit Quantity LABOUR0126 Stone mason (ornamental) Day 1.50 Add water charges @ 1% on

Rate 301.00 Total: 451.50

Add C.P & OH @15% on 456.02 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 52.44 Rs 52.45

Item Code: 11.32 Extra for kota/sand stone flooring in treads of steps using single length upto 1.05m Details of Cost for : 10.00 Sqm

DSR-12

Page 431 of 2298

Code 0124 0114

Description LABOURMason 2nd class Beldar

Unit

Quantity

Rate

Day Day

0.20 0.20

273.00 247.00 Total: 104.00

Add water charges @ 1% on

Add C.P & OH @15% on 105.04 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 12.08 Rs 12.10

Item Code: 11.33.1 25mm wooden planking, tongued and grooved in flooring Second class teak wood. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate Details of cost for 2.5x4=10 sqm. Materials-Second class indian teak wood No of joints = 4000/138 = 28.97 = (29-l) = 28nos Qty of wood required 2.5(4+0.336)x0.025 = 0.271 cum Add wastage @ 10 % = 0.027 cum = 0.2981 cum = 298.1 cudm 1190 Second class indian teak wood cum 0.2981 72000.00 1231 Extra for selected planks cum 0.2981 11500.00 2204 Carriage of timber cum 0.2981 100.11 0682 Iron screws 50 mm (slotted counters sunk head type) 100 N 200.00 70.00 LABOUR0111 Carpenter 1st class Day 2.68 301.00 0114 Beldar Day 1.35 247.00 9999 Sundries for glue etc. L.S. 33.28 1.49 Total: Add water charges @ 1% on 26250.91 Add C.P & OH @15% on 26513.42 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3049.04 Rs 3049.05

Item Code: 11.33.2 25mm wooden planking, tongued and grooved in flooring Second class deodar wood. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate Details of cost for 2.5x4=10 sqm. MATERIALSFirst class deodar wood planks No of joints = 4000/138 = 28.97 = (29-l) = 28nos Qty of wood required 2.5(4+0.336)x0.025 = 0.271 cum Add wastage @ 10 % = 0.027 cum = 0.2981 cum = 298.10 cudm 1194 First class deodar wood planks cum 0.2981 48000.00 2500 Extra for selected planks cum 0.2981 7300.00 2204 Carriage of timber cum 0.2981 100.11 0682 Iron screws 50 mm (slotted counters sunk head type) 100 N 200.00 70.00

DSR-12

Page 432 of 2298

0111 0114 9999

LABOURCarpenter 1 st class Beldar Sundries for glue etc.

Day Day L.S.

2.16 1.08 26.91

Add water charges @ 1% on

301.00 247.00 1.49 Total: 17611.79

Add C.P & OH @15% on 17787.91 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2045.61 Rs 2045.60

Item Code: 11.34 38mm wood block flooring of Ist teakwood Code

0313 2211

1187 2204 0111 0114 0115 0130 9999

Description Bitumen blown type i) For bed layer @ 2.45kg/sqm. = 2.45kg+ ii) For dipping blocks L.S. = 2.00Kg. = 4.45kg. Bitumen blown type Carriage of bitumen 1st class teak wood in scantling for wooden blocks 1 sqm x 0.038 m = 0.038 cum Add 10 % wastage = 0.0038 cum Total = 0.0418 cum or 41.80 cudm 1st class teak wood in scanting for wooden blocks Carriage of timber LABOURCarpenter 1st class Beldar Coolie Mistry Sundries such as fuel, kerosene oil, sand paper

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

tonne tonne

0.0044 0.0044

37000.00 87.60

cum

0.0418

70000.00

cum

0.0418

100.11

Day Day Day Day L.S.

1.75 2.25 1.50 0.10 80.73

301.00 247.00 247.00 301.00 1.49 Total: 4696.76

Add water charges @ 1% on

Add C.P & OH @15% on 4743.73 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 5455.29 Rs 5455.30

Item Code: 11.35 P/F MS 40x40x5mm as nosing in steps of s/c Code

1007

DSR-12

Description Details of cost for 3m (11.40+0.24kg= 11.64kg) Materialsangle iron 50x50x5 mm +3m Add wastage @ 5% +0.15m Total = 3.15m @ 3.80kg per m = 11.97 kg Say 0.120 qutl Angle iron Lugs 10x5 mm flat [email protected] kg per m = 0.24 kg

Details of Cost for : 11.64 Kg Unit Quantity

quint

0.12

Rate

4250.00

Page 433 of 2298

1008 2205 1215 9999 0103 0123 0114 13.050.03

Add wastage @ 5% = 0.012 kg M.S. flats (Total 0.252 kg or 0.0025 qtl) Carriage of steel Welding charges 6cm (lugs) by electrical plant Sundries LabourBlacksmith 2nd class Mason 1st class Beldar (A) Priming coat 1x3x0.2=0.60 sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise

quint tonne cm

0.0025 0.0122 6.00

4200.00 77.87 1.50

L.S.

9.10

1.49

Day Day Day

0.09 0.45 0.25

273.00 301.00 247.00

0.60

20.72

Add water charges @ 1% except on [A] i.e on

Total: 765.78

Add C.P & OH @15% except on [A] i.e on 773.44 Cost for 11.64 Kg Rate per One Kg: Rate as per DSR-12:

Rs 77.48 Rs 77.50

Item Code: 11.36 P/F Ist quality ceramic glazed wall tiles in all colours, shades except burgundy, bottle green, black in skirting, risers of steps and dado ... Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSCeramic Glazed tiles = 1.00 sqm Add for wastage & breakage @ 2.5 % = 0.025 sqm = 1.025 sqm 7800 Tiles sqm 1.025 295.00 9999 Carriage of tiles L.S. 6.24 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.014 4145.53 9999 Mortar for pointing in white cement L.S. 40.43 1.49 0367 Cement for slurry over bed @ 3.3 kg per sqm tonne 0.0033 5000.00 LABOUR: 0123 Mason 1 st class Day 0.25 301.00 0115 Coolie Day 0.25 247.00 9999 Sundries including carriage of cement etc L.S. 26.91 1.49 Total: Add water charges @ 1% on 623.56 Add C.P & OH @15% on 629.80 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 724.27 Rs 724.25

Item Code: 11.37 P/LCeramic glazed floor tiles 300x300 mm of 1st quality in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick C M 1:4 etc., complete. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSGlazed Ceramic floor tiles 300x300 mm size = 1.00 sqm Add for wastage & breakage @ 2.5 % = 0.025sqm = Total 1.025 sqm

DSR-12

Page 434 of 2298

7801 9999 03.009 9999 0367 0123 0115 9999

Tiles Carriage of tiles Cement mortar 1:4 (1 cement : 4 coarse sand). Mortar for pointing in white cement Cement for slurry over bed @ 3.3 kg per sqm LABOUR: Mason 1st class Coolie Sundries including carriage of cement etc

sqm L.S. L.S. tonne Day Day L.S.

1.025 6.24 0.024 20.20 0.0033

360.00 1.49 3485.41 1.49 5000.00

0.20 0.20 26.91

301.00 247.00 1.49 Total: 658.25

Add water charges @ 1% on

Add C.P & OH @15% on 664.83 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 764.55 Rs 764.55

Item Code: 11.38 P/L ceramic glazed floor tiles 300x300mm of Ist quality in all colours, except white, Ivory, Grey, Fume Red brown laid on 20 mm thick CM 1:4 Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSGlazed Ceramic floor tiles 300x300 mm size = 1.00 sqm Add for wastage & breakage @ 2.5 % = 0.025 sqm = Total 1.025 sqm 7802 Tiles sqm 1.025 367.00 9999 Carriage of tiles L.S. 6.24 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.024 3485.41 9999 Mortar for pointing in white cement L.S. 20.20 1.49 0367 Cement for slurry over bed @ 3.3 kg per sqm tonne 0.0033 5000.00 LABOUR: 0123 Mason 1 st class Day 0.20 301.00 0115 Coolie Day 0.20 247.00 9999 Sundries including carriage of cement etc L.S. 26.91 1.49 Total: Add water charges @ 1% on 665.43 Add C.P & OH @15% on 672.08 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 772.89 Rs 772.90

Item Code: 11.39 P/Lrectified Glazed Ceramic floor tiles 300x300 mm or more of 1st quality in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick CM 1:4 etc., complete. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSRectified glazed Ceramic floor tiles 300x300mm or more = 1.000 sqm Add for wastage & breakage @ 2.5 % = 0.025 sqm 7803 Total = 1.025 sqm sqm 1.025 510.00 9999 Carriage of tiles L.S. 6.24 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.024 3485.41 9999 Mortar for pointing in white cement L.S. 13.47 1.49

DSR-12

Page 435 of 2298

0367 0123 0115 9999

Cement for slurry over bed @ 3.3 kg per sqm LABOUR: Mason 1st class Coolie Sundries including carriage of cement etc

tonne Day Day L.S.

0.0033

5000.00

0.20 0.20 26.91

301.00 247.00 1.49 Total: 801.97

Add water charges @ 1% on

Add C.P & OH @15% on 809.99 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 931.49 Rs 931.50

Item Code: 11.40 P/L rectified Glazed Ceramic floor tiles 300x300 mm or more of 1st quality in colours except White, Ivory, Grey, Fume Red Brown, laid on 20mm thick CM 1:4 etc., complete. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate LABOUR: 7804 Rectified Ceramic Glazed Tiles Ist quality 300 x 300mm or more =1.000 sqm add wastage & sqm 1.025 535.00 9999 Carriage of tiles L.S. 6.24 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). Cum 0.024 3485.41 9999 Mortar for pointing in white cement L.S. 13.47 1.49 0367 Cement for slurry over bed @ 3.3 kg per sqm tonne 0.0033 5000.00 LABOUR: 0123 Mason (brick layer) 1st class Day 0.20 301.00 0115 Coolie Day 0.20 247.00 9999 Sundries including carriage of cement etc., L.S. 26.91 1.49 Total: Add water charges @ 1% on 827.60 Add C.P & OH @15% on 835.88 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 961.26 Rs 961.25

Item Code: 11.41.1 P/L vitrified floor tiles of in all colours and shades, laid on 20mm thick CM 1:4 - grouting the joints with white cement - Size of Tile 50x50 cm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSPorcelain floor tiles 50x50 cm size = 1.000 sqm Add for wastage & breakage @ 2.5 % = 0.025 sqm 8620 Total = 1.025 sqm sqm 1.025 735.00 9999 Carriage of tiles L.S. 6.24 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.024 3485.41 9999 Mortar for pointing in white cement L.S. 3.64 1.49 0367 Cement for slurry over bed @ 3.3 kg per sqm tonne 0.0033 5000.00 LABOUR: 0123 Mason 1st class Day 0.20 301.00 0115 Coolie Day 0.20 247.00 9999 Sundries including carriage of cement etc L.S. 26.91 1.49 Total:

DSR-12

Page 436 of 2298

Add water charges @ 1% on

1017.95

Add C.P & OH @15% on 1028.13 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1182.35 Rs 1182.35

Item Code: 11.41.2 P/L vitrified floor tiles laid on 20mm thick CM 1:4 including grouting the joints with white cement complete. Size of Tile 60x60 cm

Code

8621 9999 03.009 9999 0367 0123 0115 9999

Description MATERIALSPorcelain floor tiles 60x60 cm size = 1.000 sqm Add for wastage & breakage @ 2.5 % = 0.025 sqm Total = 1.025 sqm Carriage of tiles Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item no. 3.90) Mortar for pointing in white cement Cement for slurry over bed @ 3.3 kg per sqm LABOUR: Mason I class Coolie Sundries including carriage of cement etc

Details of Cost for : 1.00 Sqm Unit Quantity

sqm L.S.

L.S. tonne Day Day L.S.

Rate

1.025 6.24 0.024

865.00 1.49 3485.41

3.64 0.0033

1.49 5000.00

0.20 0.20 26.91

301.00 247.00 1.49 Total: 1151.20

Add water charges @ 1% on

Add C.P & OH @15% on 1162.71 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1337.12 Rs 1337.10

Item Code: 11.41.3 P/L vitrified floor tiles approved make in all colours and shades, laid on 20mm thick CM 1:4 etc., complete. Size of Tile 80x80 cm

Code

8622 9999 03.009 9999 0367 0123 0115 9999

Description MATERIALSPorcelain floor tiles 80x80 cm size = 1.000 sqm Add for wastage & breakage @ 2.5 % = 0.025 sqm Total = 1.025 sqm Carriage of tiles Cement mortar 1:4 (1 cement : 4 coarse sand). Mortar for pointing in white cement Cement for slurry over bed @ 3.3 kg per sqm LABOUR: Mason 1st class Coolie Sundries including carriage of cement etc

Details of Cost for : 1.00 Sqm Unit Quantity

sqm L.S. L.S. tonne Day Day L.S.

Rate

1.025 6.24 0.024 2.60 0.0033

1070.00 1.49 3485.41 1.49 5000.00

0.20 0.20 26.91

301.00 247.00 1.49 Total: 1359.77

Add water charges @ 1% on

Add C.P & OH @15% on 1373.37 Cost for 1.00 Sqm

DSR-12

Page 437 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 1579.38 Rs 1579.40

Item Code: 11.41.4 P/L vitrified floor tiles in different sizes of approved make in all colours and shades, laid on 20mm thick CM 1:4 etc., complete. Size of Tile 100x100 cm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALSVitrified floor tiles 100x100 cm size = 1.000 sqm Add for wastage & breakage @ 2.5 % = 0.025 sqm 8623 Total = 1.025 sqm sqm 1.025 1630.00 9999 Carriage of tiles L.S. 6.24 1.49 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.024 3485.41 9999 Mortar for pointing in white cement L.S. 2.60 1.49 0367 Cement for slurry over bed @ 3.3 kg per sqm tonne 0.0033 5000.00 LABOUR: 0123 Mason 1st class Day 0.20 301.00 0115 Coolie Day 0.20 247.00 9999 Sundries including carriage of cement etc L.S. 26.91 1.49 Total: Add water charges @ 1% on 1933.77 Add C.P & OH @15% on 1953.11 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2246.08 Rs 2246.10

Item Code: 11.42 Deduct for not using 20mm thick cment mortar 1:4(1cement : 4 coarse sand )bedding in laying of floor tiles. Details of Cost for : -1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). Cum 0.024 3485.41 9999 Mortar for pointing in white cement L.S. 40.43 1.49 0367 Cement tonne 0.0033 5000.00 LABOUR: 0123 Mason I class Day 0.20 301.00 0115 Coolie Day 0.20 247.00 9999 Sundries L.S. 26.91 1.49 Total: Add water charges @ 1% on 310.09 Add C.P & OH @15% on 313.19 Cost for -1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

-Rs 360.17 -Rs 360.15

Item Code: 11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) . ... ..

Code 8731

DSR-12

Description MATERIALS: High polymer modified quickset tile adhesive.

Details of Cost for : 1.00 Sqm Unit Quantity per k

5.00

Rate 16.00

Page 438 of 2298

9999

Mortar for pointing in white cement

0123 0115 9999

LABOUR: Mason I class Coolie Sundries

L.S.

40.43

1.49

Day Day L.S.

0.20 0.20 26.91

301.00 247.00 1.49 Total: 289.94

Add water charges @ 1% on

Add C.P & OH @15% on 292.84 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 336.77 Rs 336.75

Item Code: 11.44 Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre..

Code

03.009 0124 0114 0101 9999 0367 2209 0114

2709 9999

03.009 04.018 04.012

0123 0114 0115 0101 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS: Under layer 12mm thick Cement mortar 1:4 Cement mortar 1:4 (1 cement : 4 coarse sand). Mason (brick layer) 2nd class Beldar Bhisti Scaffolding Cement slurry for sub-grade Portland Cement Carraige of Cement Labour for applying cement slurry Beldar Top layer with tile piece and gap filling with cement mortar: Ceramic tile piece for crazy flooring assuming 70% tile area and 30% of joint filler /mixture 7 x 0.01 = 0.07 0.872 x 0.07 / 0.051=1.20 Qtl Ceremic Tiles Pieces for Crazy Flooring Carriage of materials Cement mortar 1:4 for filling of crazy tile: (300 x 0.01=0.03) Cement mortar 1:4 (1 cement : 4 coarse sand). Extra for addition of synthetic polyester triangular fibre in cement concrete/ RCC/ Floori Extra for mixing water proofing material in CC work @ 1 kg per 50kg of cement. LABOUR: Mason (brick layer) 1st class Beldar Coolie Bhisti Sundries

Rate

Cum Day Day Day L.S.

0.14 0.67 0.75 0.92 8.97

3485.41 273.00 247.00 260.00 1.49

tonne tonne

0.04 0.04

5000.00 77.87

Day

0.50

247.00

Qtl L.S.

1.20 62.40

130.00 1.49

Cum units

0.03 1.38

3485.41 53.00

units

1.38

35.33

Day Day Day Day L.S.

1.20 1.00 1.00 0.54 67.25

301.00 247.00 247.00 260.00 1.49 Total: 2884.64

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 2913.49 Cost for 10.00 Sqm

DSR-12

Page 439 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 347.24 Rs 347.25

Item Code: 11.45 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) Code 0295

0114 0115 0101 02.027 2708 0123 0114 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS: Stone Aggregate (Single size) : 20 mm nominal size LABOUR: For spreading ramming and consolidation of sub-grade Beldar Coolie Bhisti Providing and filling Jamuna / Sand for filling S/F in plinth with river sand under floors .. .. Truf Paver (500 x 500 x 40 mm) Labour for turf pave Mason (brick layer) 1st class Beldar Sundries

Rate

cum

1.50

1050.00

Day Day Day

0.70 0.52 0.36

247.00 247.00 260.00

Cum Sqm

1.50 10.00

749.30 1080.65

Day Day L.S.

0.50 1.00 50.00

301.00 247.00 1.49 Total: 13248.44

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 13380.92 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1651.20 Rs 1651.20

Item Code: 11.46.1 P/L Vitrified tiles in different sizes in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 - Size of Tile 500x500 mm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 8620 Vitrified floor tiles 50x50 cm Sqm 1.025 735.00 (Qty including 2.5% for wastage and breakage) 9999 Carriage L.S. 6.24 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum 0.014 4145.53 9999 Mortart for pointing in white cement L.S. 3.64 1.49 Cement slurry over bed @ 3.3 kg/ sqm 0367 Portland Cement tonne 0.0033 5000.00 LABOUR: 0123 Mason (brick layer) 1st class Day 0.25 301.00 0115 Coolie Day 0.25 247.00 9999 Sundries including carriage of quick set polymer etc., L.S. 26.91 1.49 Total: Add water charges @ 1% on 1019.74 Add C.P & OH @15% on 1029.94 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 1184.43 Rs 1184.40

Page 440 of 2298

Item Code: 11.46.2 P/L Vitrified tiles in different sizes in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 - Size of Tile 600x600 mm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 8621 Vitrified floor tile 60x60 cm sqm 1.025 865.00 (Qty including 2.5% for wastage and breakage) 9999 Carriage L.S. 6.24 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum 0.014 4145.53 9999 Mortart for pointing in white cement L.S. 3.64 1.49 Cement slurry over bed @ 3.3 kg/ sqm 0367 Portland Cement tonne 0.0033 5000.00 LABOUR: 0123 Mason (brick layer) 1st class Day 0.25 301.00 0115 Coolie Day 0.25 247.00 9999 Sundries including carriage of quick set polymer etc., L.S. 26.91 1.49 Total: Add water charges @ 1% on 1152.99 Add C.P & OH @15% on 1164.52 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1339.20 Rs 1339.20

Item Code: 11.46.3 P/L Vitrified tiles in different sizes in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 - Size of Tile 800x800 mm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 8622 Vitrified floor tile 80x80 cm sqm 1.025 1070.00 (Qty including 2.5% for wastage and breakage) 9999 Carriage L.S. 6.24 1.49 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum 0.014 4145.53 9999 Mortart for pointing in white cement L.S. 3.64 1.49 Cement slurry over bed @ 3.3 kg/ sqm 0367 Portland Cement tonne 0.0033 5000.00 LABOUR: 0123 Mason (brick layer) 1st class Day 0.25 301.00 0115 Coolie Day 0.25 247.00 9999 Sundries including carriage of quick set polymer etc., L.S. 26.91 1.49 Total: Add water charges @ 1% on 1363.11 Add C.P & OH @15% on 1376.74 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1583.25 Rs 1583.25

Item Code: 11.46.4 P/L Vitrified tiles in different sizes in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 - Size of Tile 1000x1000 mm

DSR-12

Page 441 of 2298

Code 8623 9999 03.008 9999

0367 0123 0115 9999

Description MATERIALS: Vitrified floor tile 100x100 cm (Qty including 2.5% for wastage and breakage) Carriage Cement mortar 1:3 (1 cement : 3 coarse sand) Mortart for pointing in white cement Cement slurry over bed @ 3.3 kg/ sqm Portland Cement LABOUR: Mason (brick layer) 1st class Coolie Sundries including carriage of quick set polymer etc.,

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

sqm

1.025

1630.00

L.S. Cum

6.24 0.014

1.49 4145.53

L.S.

3.64

1.49

0.0033

5000.00

0.25 0.25 26.91

301.00 247.00 1.49 Total: 1937.11

tonne Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 1956.48 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2249.95 Rs 2249.95

Item Code: 11.47.1 Providing and laying Vitrified tiles in different sizes in all_x000D_ colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based)..Size of Tile 500x500 mm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 8620 Vitrified floor tile 50x50 cm sqm 1.025 735.00 (Qty including 2.5% for wastage and breakage) 9999 Carriage of tiles L.S. 6.24 1.49 8731 High polymer modified quickset tile adhesive per k 10.00 16.00 LABOUR: 0123 Mason (brick layer) 1st class Day 0.25 301.00 0115 Coolie Day 0.50 247.00 9999 Sundries including carriage of quickset polymer etc., L.S. 26.91 1.49 Total: Add water charges @ 1% on 1161.53 Add C.P & OH @15% on 1173.15 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1349.12 Rs 1349.10

Item Code: 11.47.2 Providing and laying Vitrified tiles in different sizes in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based)..Size of Tile 600x600 mm

Code 8621 9999

DSR-12

Description MATERIALS: Vitrified floor tile 60x60 cm (Qty including 2.5% for wastage and breakage) Carriage of tiles

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

sqm

1.025

865.00

L.S.

6.24

1.49

Page 442 of 2298

8731 0123 0115 9999

High polymer modified quickset tile adhesive LABOUR: Mason (brick layer) 1st class Coolie Sundries including carriage of quickset polymer etc.,

per k

10.00

16.00

Day Day L.S.

0.25 0.50 26.91

301.00 247.00 1.49 Total: 1294.78

Add water charges @ 1% on

Add C.P & OH @15% on 1307.73 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1503.89 Rs 1503.85

Item Code: 11.47.3 Providing and laying Vitrified tiles in different sizes in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based)..Size of Tile 800x800 mm

Code 8622 9999 8731 0123 0115 9999

Description MATERIALS: Vitrified floor tile 80x80 cm (Qty including 2.5% for wastage and breakage) Carriage of tiles High polymer modified quickset tile adhesive LABOUR: Mason (brick layer) 1st class Coolie Sundries including carriage of quickset polymer etc.,

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

sqm

1.025

1070.00

L.S. per k

6.24 10.00

1.49 16.00

Day Day L.S.

0.25 0.50 26.91

301.00 247.00 1.49 Total: 1504.90

Add water charges @ 1% on

Add C.P & OH @15% on 1519.95 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1747.94 Rs 1747.95

Item Code: 11.47.4 Providing and laying Vitrified tiles in different sizes in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based)..Size of Tile 1000x1000 mm

Code 8623 9999 8731 0123 0115 9999

Description MATERIALS: Vitrified floor tile 100x100 cm (Qty including 2.5% for wastage and breakage) Carriage of tiles High polymer modified quickset tile adhesive LABOUR: Mason (brick layer) 1st class Coolie Sundries including carriage of quickset polymer etc.,

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

sqm

1.025

1630.00

L.S. per k

6.24 10.00

1.49 16.00

Day Day L.S.

0.25 0.50 26.91

301.00 247.00 1.49 Total: 2078.90

Add water charges @ 1% on

Add C.P & OH @15% on 2099.69 Cost for 1.00 Sqm

DSR-12

Page 443 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 2414.64 Rs 2414.65

Item Code: 11.48.1 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade .. Size of Tile 500x500 mm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 8682 Epoxy Grout Kg 0.21 500.00 LABOUR: 0123 Mason (brick layer) 1st class Day 0.10 301.00 0115 Coolie Day 0.10 247.00 9999 Sundries including carriage L.S. 5.00 1.49 Total: Add water charges @ 1% on 167.25 Add C.P & OH @15% on 168.92 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 194.26 Rs 194.25

Item Code: 11.48.2 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade .. Size of Tile 600x600 mm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 8682 Epoxy Grout Kg 0.18 500.00 LABOUR: 0123 Mason (brick layer) 1st class Day 0.08 301.00 0115 Coolie Day 0.08 247.00 9999 Sundries including carriage L.S. 5.00 1.49 Total: Add water charges @ 1% on 141.29 Add C.P & OH @15% on 142.70 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 164.11 Rs 164.10

Item Code: 11.48.3 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade .. Size of Tile 800x800 mm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 8682 Epoxy Grout Kg 0.15 500.00 LABOUR: 0123 Mason (brick layer) 1st class Day 0.06 301.00 0115 Coolie Day 0.06 247.00 9999 Sundries including carriage L.S. 5.00 1.49 Total: Add water charges @ 1% on 115.33

DSR-12

Page 444 of 2298

Add C.P & OH @15% on 116.48 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 133.95 Rs 133.95

Item Code: 11.48.4 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade .. Size of Tile 1000x1000 mm Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 8682 Epoxy Grout Kg 0.11 500.00 LABOUR: 0123 Mason (brick layer) 1st class Day 0.04 301.00 0115 Coolie Day 0.04 247.00 9999 Sundries including carriage L.S. 5.00 1.49 Total: Add water charges @ 1% on 84.37 Add C.P & OH @15% on 85.21 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 97.99 Rs 98.00

Item Code: 11.49.1 Providing and laying Vitrified tiles in floor with different sizes laid with cement based high polymer modified_x000D_ quick set tile adhesive (water based) - 6 mm thickness - Size of Tile 500x500 mm

Code 8620 9999 8731 0123 0115 9999

Description MATERIALS: Vitrified floor tile 50x50 cm (Qty including 2.5% for wastage and breakage) Carriage of tiles High polymer modified quickset tile adhesive LABOUR: Mason (brick layer) 1st class Coolie Sundries including carriage of quick set polymer etc.,

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

sqm

1.025

735.00

L.S. per k

6.24 10.00

1.49 16.00

Day Day L.S.

0.20 0.40 26.91

301.00 247.00 1.49 Total: 1121.78

Add water charges @ 1% on

Add C.P & OH @15% on 1133.00 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1302.95 Rs 1302.95

Item Code: 11.49.2 Providing and laying Vitrified tiles in floor with different sizes laid with cement based high polymer modified quick set tile adhesive (water based) - 6 mm thickness - Size of Tile 600x600 mm

Code

DSR-12

Description

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

Page 445 of 2298

8621 9999 8731 0123 0115 9999

MATERIALS: Vitrified floor tile 60x60 cm (Qty including 2.5% for wastage and breakage) Carriage of tiles High polymer modified quickset tile adhesive LABOUR: Mason (brick layer) 1st class Coolie Sundries including carriage of quick set polymer etc.,

sqm

1.025

865.00

L.S. per k

6.24 10.00

1.49 16.00

Day Day L.S.

0.20 0.40 26.91

301.00 247.00 1.49 Total: 1255.03

Add water charges @ 1% on

Add C.P & OH @15% on 1267.58 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1457.72 Rs 1447.70

Item Code: 11.49.3 Providing and laying Vitrified tiles in floor with different sizes laid with cement based high polymer modified quick set tile adhesive (water based) - 6 mm thickness - Size of Tile 800x800 mm

Code 8622 9999 8731 0123 0115 9999

Description MATERIALS: Vitrified floor tile 80x80 cm (Qty including 2.5% for wastage and breakage) Carriage of tiles High polymer modified quickset tile adhesive LABOUR: Mason (brick layer) 1st class Coolie Sundries including carriage of quick set polymer etc.,

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

sqm

1.025

1070.00

L.S. per k

6.24 10.00

1.49 16.00

Day Day L.S.

0.20 0.40 26.91

301.00 247.00 1.49 Total: 1465.15

Add water charges @ 1% on

Add C.P & OH @15% on 1479.80 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1701.77 Rs 1701.75

Item Code: 11.49.4 Providing and laying Vitrified tiles in floor with different sizes laid with cement based high polymer modified quick set tile adhesive (water based) - 6 mm thickness - Size of Tile 1000x1000 mm

Code 8623 9999 8731 0123 0115 9999

DSR-12

Description MATERIALS: Vitrified floor tile 100x100 cm (Qty including 2.5% for wastage and breakage) Carriage of tiles High polymer modified quickset tile adhesive LABOUR: Mason (brick layer) 1st class Coolie Sundries including carriage of quick set polymer etc.,

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

sqm

1.025

1630.00

L.S. per k

6.24 10.00

1.49 16.00

Day Day L.S.

0.20 0.40 26.91

301.00 247.00 1.49 Total:

Page 446 of 2298

Add water charges @ 1% on

2039.15

Add C.P & OH @15% on 2059.54 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2368.47 Rs 2468.45

Item Code: 11.50 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.

Code 9999

Description Mortar for pointing in white cement with matching pigment

Details of Cost for : -1.00 Sqm Unit Quantity L.S. 3.12

9999

Labour

L.S.

1.00

Add water charges @ 1% on

Rate 1.49 1.49 Total: 6.14

Add C.P & OH @15% on 6.20 Cost for -1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

-Rs 7.13 -Rs 7.15

Item Code: 12.1.1 Prdg corrugated G.S. sheet roofing excluding the cost of purlins, rafters and trusses - 1.00mm thick with zinc coating not less than 275gm/sqm Details of Cost for : 184.52 Sqm Code Description Unit Quantity Rate MATERIALS: C.G.S. sheets 2x27 =54 nos. of size 2.5x0.9 metre @19.35 Kg each =1044.90Kg. 2x27=54 nos. of size [email protected]. each = 1170.18Kg. Total = 2215.08Kg.+ Add 5% Wastage = 110.75Kg. = 2325.83 Kg. 23.26 quintals 3050 C.G.I sheets - 0.63mm thick quint 23.26 5075.00 2302 Carriage of C.G.I sheets tonne 2.326 77.87 (c) G.I.Seam bolts and nuts 60cm centre to centre zig-zag i.e. 30cm centre to centre straight Breadth is 5.1 metre No. of bolts in one lap 5.1/0.3 =17 nos. 2x26(laps)x17 nos. = 884 nos. 1022 G.I seam bolts and nuts 10 No 884.00 20.00 (d) G.I..J or L hooks 8mm dia. (No. of purlins to be used 5 on either side)2x5x27 (No. of sheets)x23 nos. of bolts in each sheet = 810 nos. 1023 G.I J or L hooks 8mm dia with nuts and bolts 10 No 810.00 90.00 1207 Limpet washers 100 N 1694.00 35.00 1208 GI washers 100 N 1694.00 25.00 9999 Carriage of bolts and washers L.S. 26.91 1.49 9999 Sundries L.S. 53.82 1.49

DSR-12

Page 447 of 2298

0130 0112 0114 4202 9999 0131 0115 9999 0845 9999 0131 0115 9999 9999

LABOUR: Mistry Carpenter II class Beldar Zinc chromate - Red Oxide - primer Carriage of materials Painter Coolie Brushes, sand papers i/c sundries Ready mixed paint Carriage of paint Painter Coolie Brushes, sand papers Sundries

Day Day Day litre L.S. Day Day L.S. litre L.S. Day Day L.S. L.S.

1.30 15.50 15.50 2.53 0.52 1.13 1.13 50.57 3.75 6.76 2.53 2.53 31.98 38.09

Add water charges @ 1% on

301.00 273.00 247.00 68.00 1.49 273.00 247.00 1.49 110.00 1.49 273.00 247.00 1.49 1.49 Total: 139549.95

Add C.P & OH @15% on 140945.45 Cost for 184.52 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 878.43 Rs 878.45

Item Code: 12.1.2 Prdg corrugated G.S. sheet roofing excluding purlins, rafters etc.,.. - 0.80mm thick with zinc coating not less than 275gm/m²

Code

3050 2302

DSR-12

Details of Cost for : 184.52 Sqm Description Unit Quantity Rate Details of length and breadth. Length 26(laps)xO.135(each lap)=3.51 Width of Corrugated sheet with 10 corrugation measured end to end = 0.8 metres 27 (nos. of sheets)x0.80 (width of sheet) = 21.60 length Less laps = 3.51 Length = 18.09 Breadth on one sideC.G.S. Sheet 1 No. of = 2.5 metres length+ C.G.S. Sheet 1 No. of = 2.8 metres length = 5.3 metres Deduct end lap of 20cm (-)0.2 metres breadth = 5.1 m MATERIALS: C.G.I.Sheets 0.8mm thick 2x27=54nos. @15.82Kg.each = 854.38Kg(X) 2.5mx0.9m is the size of plain G.I.sheet which on being corrugated will become 2.5mx0.8m (The size of plain sheet is taken because the weight is available only of plain sheets) (Refer l.S. Code 277-1962) 2x27=54nos. of size. 2.8x0.9 @17.72Kg each’ = 956.8Kg (Y) Total of (X)+(Y) = 1811.16Kg. Add wastage @5% = 90.56Kg. = 1901.72Kg (a) Sheets quint 19.02 5075.00 (b) Carriage of sheet tonne 1.902 77.87

Page 448 of 2298

1022

1023 1207 1208 9999 9999 0130 0112 0114 4202 9999 0131 0115 9999 0845 9999 0131 0115 9999 9999

(c) G.I. seam bolts and nuts 60cm centre to centre zig zag i.e. 30cm. centre to centre straight Breadth is 5.1 metre No. of bolts in one lap 5.1/0.3 =17 nos. 2x26(laps)xl7 nos. = 884 nos. Bolts and nuts (d) G.I., j or L hooks 8mm dia. (No. of purlins to be used 5 on either side)2x5x27 (No. of sheets)x23 nos. of bolts in each sheet = 810 nos. G.I. J or L hooks (e) Limpet washers (total of seam and J bolts) 884+810=1694 (f) Bitumen washers (g) Carriage of bolts and washers Sundries LABOUR: Mistry Carpenter 2nd class Beldar Zink chromate yellow primer Carriage of material Painter Coolie Brushes, sand papers i/c sundries Ready mixed paint on new work Carriage of paint Painter Coolie Brushes and Sandpapers Sundries

10 No

884.00

20.00

10 No 100 N

810.00 1694.00

90.00 35.00

100 N L.S. L.S.

1694.00 26.91 53.82

25.00 1.49 1.49

1.30 15.50 15.50 2.53 0.52 1.13 1.13 50.57 3.75 6.76 2.53 2.53 31.98 38.09

301.00 273.00 247.00 68.00 1.49 273.00 247.00 1.49 110.00 1.49 273.00 247.00 1.49 1.49 Total: 117998.93

Day Day Day litre L.S. Day Day L.S. litre L.S. Day Day L.S. L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 119178.92 Cost for 184.52 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 742.77 Rs 742.80

Item Code: 12.1.3 Prdg corrugated G.S. sheet roofing excluding purlins etc - 0.63 mm thick with zinc coating not less than 275gm/ m²

Code

DSR-12

Description Considering a roof with each sloping side 18.09x5.10m and the slope being flatter than 1 vertical to 2.5 horizontal Details of cost for area of roof. 2x18.09x5.1 = 184.518 sqm. Details of length and breadth. Length 26(laps)xO.135(each lap)=3.51 Width of Corrugated sheet with 10 corrugation measured end to end = 0.8 metres 27 (nos. of sheets)x0.80 (width of sheet = 21.60 length Less laps = 3.51 Length = 18.09 Breadth on one sideC.G.S. Sheet 1 No. of = 2.5 metres length+

Details of Cost for : 184.52 Sqm Unit Quantity

Rate

Page 449 of 2298

3050 2302

1022

1023 1207 1208 9999 9999 0130 0112 0114 4202 9999 0131 0115 9999 0845 9999 0131 0115 9999 9999

C.G.S. Sheet 1 No. of = 2.8 metres length = 5.3 metres Deduct end lap of 20cm (-)0.2 metres breadth = 5.1m Materials: C.G.I.Sheets 0.8mm thick 2x27=54nos. @12.82Kg.each = 692.28 Kg(X) 2.5mxO.9m is the size of plain G.I.sheet which on being corrugated will become 2.5mxO.8m (The size of plain sheet is taken because the weight is available only of plain sheets) (Refer I.S. Code 277-1962) 2x27=54nos. of size-2.8x0.9 @13.38Kg each’ = 775.44Kg (Y) Total of (X)+(Y) = 1467.72Kg. Add wastage @5% = 73.39Kg. = 1541.11HKg (a) Sheets (b) Carriage of sheet (c) G.I. seam bolts and nuts 60cm centre to centre zig zag i.e. 30cm. centre to centre straight Breadth is 5.1 metre No. of bolts in one lap 5.1/0.3 =17 nos. 2x26(laps)xl7 nos. = 884 nos. Bolts and nuts (d) G.I., J or L hooks 8mm dia. (No. of purlins to be used 5 on either side)2x5x27 (No. of sheets)x23 nos. of bolts in each sheet = 810 nos. G.I. J or L hooks (e) Limpet washers (total of seam and J bolts) 884+810= 1694 (f) Bitumen washers (g) Carriage of bolts and washers Sundries Labour: Mistry Carpenter 2nd class Beldar Zink chromate yellow primer Carriage of material Painter Coolie Brushes, sand papers i/c sundries Ready mixed paint on new work Carriage of paint Painter Coolie Brushes and Sandpapers Sundries

quint tonne

15.41 1.54

5075.00 77.87

10 No

884.00

20.00

10 No 100 N

810.00 1694.00

90.00 35.00

100 N L.S. L.S.

1694.00 26.91 53.82

25.00 1.49 1.49

1.30 15.50 15.50 2.53 0.52 1.13 1.13 50.57 3.75 6.76 2.53 2.53 31.98 38.09

301.00 273.00 247.00 68.00 1.49 273.00 247.00 1.49 110.00 1.49 273.00 247.00 1.49 1.49 Total: 99649.99

Day Day Day litre L.S. Day Day L.S. litre L.S. Day Day L.S. L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 100646.49 Cost for 184.52 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 627.27 Rs 627.25

Page 450 of 2298

Item Code: 12.2.1 Extra for straight cutting in CGS sheet roofing exceeding 40 Sqm for chimney, sky light etc 1.00 mm thick. Details of Cost for : 3.00 m Code Description Unit Quantity Details of cost for 3 metres periphery Assuming a hole of 10dmx5dm area of the hole 50 sqdm and the perimeter of the hole 3 metre LABOUR: 0102 Blacksmith first class Day 0.15 0114 Beldar Day 0.15 Add water charges @ 1% on

Rate

301.00 247.00 Total: 82.20

Add C.P & OH @15% on 83.02 Cost for 3.00 m Rate per One Metre: Rate as per DSR-12:

Rs 31.82 Rs 31.80

Item Code: 12.2.2 Extra for straight cutting in CGS sheet roofing exceeding 40 Sqm for chimney, sky light etc 0.80 mm thick. Details of Cost for : 3.00 m Code Description Unit Quantity Details of cost for 3 metres periphery Assuming a hole of 10dmx5dm area of the hole 50 sqdm and the perimeter of the hole 3 metre LABOUR: 0102 Blacksmith first class Day 0.12 0114 Beldar Day 0.12 Add water charges @ 1% on

Rate

301.00 247.00 Total: 65.76

Add C.P & OH @15% on 66.42 Cost for 3.00 m Rate per One Metre: Rate as per DSR-12:

Rs 25.46 Rs 25.45

Item Code: 12.2.3 Extra for straight cutting in CGS sheet roofing exceeding 40 Sqm for chimney, sky light etc 0.63 mm thick. Details of Cost for : 3.00 m Code Description Unit Quantity Details of cost for 3 metres periphery Assuming a hole of 10dmx5dm area of the hole 50sqdm and the perimeter of the hole 3 metre LABOUR: 0102 Blacksmith first class Day 0.12 0114 Beldar Day 0.12 Add water charges @ 1% on

Rate

301.00 247.00 Total: 65.76

Add C.P & OH @15% on 66.42 Cost for 3.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 25.46 Rs 25.45

Page 451 of 2298

Item Code: 12.3.1 Extra for circular cutting in CGS sheet roofing exceeding 40 Sqm 1.00 mm thick. Details of Cost for : 15.71 m Code Description Unit Quantity Details of cost for 10 holes of 0.5 metre dia-metre Perimetre of 10 nos 10x22/7x0.5 = 15.71 metre LABOUR: 0102 Blacksmith first class Day 3.13 0114 Beldar Day 6.26 Add water charges @ 1% on

Rate

301.00 247.00 Total: 2488.35

Add C.P & OH @15% on 2513.23 Cost for 15.71 m Rate per One Metre: Rate as per DSR-12:

Rs 183.97 Rs 183.95

Item Code: 12.3.2 Extra for circular cutting in CGS sheet roofing exceeding 40 Sqm 0.80 mm thick. Details of Cost for : 15.71 m Code Description Unit Quantity Details of cost for 10 holes of 0.5 metre dia-metre Perimetre of 10 nos 10x22/7x0.5 =15.71 metre LABOUR: 0102 Blacksmith first class Day 2.50 0114 Beldar Day 5.00 Add water charges @ 1% on

Rate

301.00 247.00 Total: 1987.50

Add C.P & OH @15% on 2007.38 Cost for 15.71 m Rate per One Metre: Rate as per DSR-12:

Rs 146.94 Rs 146.95

Item Code: 12.3.3 Extra for circular cutting in CGS sheet roofing exceeding 40 Sqm 0.63 mm thick Details of Cost for : 15.71 m Code Description Unit Quantity Details of cost for 10 holes of 0.5 metre dia-metre Perimetre of 10 nos 10x22/7x0.5 = 15.71 metre LABOUR: 0102 Blacksmith first class Day 2.50 0114 Beldar Day 5.00 Add water charges @ 1% on

Rate

301.00 247.00 Total: 1987.50

Add C.P & OH @15% on 2007.38 Cost for 15.71 m Rate per One Metre: Rate as per DSR-12:

Rs 146.94 Rs 146.95

Item Code: 12.4.1

DSR-12

Page 452 of 2298

Providing ridges or hips of plain GS sheet fixed with GI J or L hooks 0.80 mm thick Details of Cost for : 10.35 m Code Description Unit Quantity 0.80mm thick with zinc coating not less than 275gm/sqm

Rate

Consider the length of the ridge 10.35 metres. The ridge will be made out of plain G.I. Sheets 0.9mx1.8m

0992 2302

0222 1211 1208 9999 9999 0130 0102 0103 0114

Three pieces will be 0.9m long and 0.60m wide overlapping 22.5cm. MATERIALS G.I. plain sheets 0.80 thick 1.80x0.90msize5nos. @ 11.39Kg. sheet = 56.95Kg + Add 2% wastage = 1.14 Kg. = 58.09 Kg. or 0.58 qunital G.I. plain sheets Carriage of sheets G.I. seam bolts and nuts25mmx6mm (There are 14 joints) G.I. seam bolts and nuts G.I. plain washers Bitumen washers Carriage of seam bolts and washers Sundries LABOUR: Mistry Blacksmith first class Blacksmith 2nd class Beldar

quint tonne

0.58 0.058

4750.00 77.87

10 No 100 N 100 N L.S. L.S.

28.00 28.00 28.00 1.82 13.52

35.00 32.00 25.00 1.49 1.49

0.40 1.20 0.80 2.40

301.00 301.00 273.00 247.00 Total: 4189.13

Day Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 4231.02 Cost for 10.35 m Rate per One Metre: Rate as per DSR-12:

Rs 470.11 Rs 470.10

Item Code: 12.4.2 Providing ridges or hips of plain GS sheet fixed with GI J or L hooks 0.63 mm thick . Details of Cost for : 10.35 m Code Description Unit Quantity Details of cost for 10.35 metre long ridge. G.I.plain sheets 0.63mm thick 1.8xO.9m size 5 nos. @9.23 Kg. per sheet = 46.15 Kg.+ Add 2% wastage = 0.91 Kg. = 47.07 Kg. Say 47 Kg. 0992 G.I. plain sheets quint 0.47 2302 Carriage of sheets tonne 0.047 G.I. seam bolts and nuts25mmx6mm (There are 14 joints) 0222 G.I. seam bolts and nuts 10 No 28.00 1211 G.I. plain washers 100 N 28.00 1208 Bitumen washers 100 N 28.00 9999 Carriage of seam bolts and washers L.S. 1.82 9999 Sundries L.S. 13.52 LABOUR: 0130 Mistry Day 0.40 0102 Blacksmith first class Day 1.20

DSR-12

Rate

4750.00 77.87

35.00 32.00 25.00 1.49 1.49 301.00 301.00

Page 453 of 2298

0103 0114

Blacksmith 2nd class Beldar

Day Day

0.80 2.40

Add water charges @ 1% on

273.00 247.00 Total: 3665.77

Add C.P & OH @15% on 3702.43 Cost for 10.35 m Rate per One Metre: Rate as per DSR-12:

Rs 411.38 Rs 411.40

Item Code: 12.5.1 Providing valleys of 90cm wide overall in plain GS sheet 1.60 mm thick Code

0992 2302

0222 1211 1208 9999 9999 0130 0102 0103 0114

Details of Cost for : 9.325 m Unit Quantity

Description

MATERIALS: G.I. plain sheets 2.5x0.9m 4 nos. @ 29.95Kg/sheet =119.80Kg.+ Add 2% wastage = 2.40Kg. = 122.20 kg. or 1.222quintal G.I. plain sheets quint Carriage of sheets tonne G.I. seam bolts and nuts25mmx6mm (There are 14 joints) G.I. seam bolts and nuts 10 No G.I. plain washers 100 N Bitumen washers 100 N Carriage of bolts, nuts and washers L.S. Sundries L.S. LABOUR: Mistry Day Blacksmith first class Day Blacksmith 2nd class Day Beldar Day

Rate

1.222 0.12

4750.00 77.87

12.00 12.00 12.00 0.91 13.52

35.00 32.00 25.00 1.49 1.49

0.40 1.20 0.80 2.40

301.00 301.00 273.00 247.00 Total: 7176.98

Add water charges @ 1% on

Add C.P & OH @15% on 7248.75 Cost for 9.325 m Rate per One Metre: Rate as per DSR-12:

Rs 893.95 Rs 893.95

Item Code: 12.6.1 Providing flashing of 40cm over all width in plain, GS sheet 1.00 mm thick Code

0992 2302

0222

DSR-12

Details of Cost for : 12.125 m Description Unit Quantity Consider a length of flashing 12.125 metres. MATERIALS: G.I. plain sheet 1.25mm thick 3.2xO.75m 2 nos. @ 20.64 Kg. =41.28 Kg.+ Add 2% wastage = 0.83 Kg = 42.11 Kg. or 0.4211 quintal G.I. plain sheets quint 0.4211 Carriage of sheets tonne 0.041 G.I. seam bolts and nuts-25mmx6mm (taking 2 bolts per joints) G.I. seam bolts and nuts 10 No 6.00

Rate

4750.00 77.87

35.00

Page 454 of 2298

1207 1208 9999 9999 0130 0102 0103 0114

Limpet washers Bitumen washers Carriage of G.I. seam bolts and washers sundries LABOUR: Mistry Blacksmith first class Blacksmith 2nd class Beldar

100 N 100 N L.S. L.S. Day Day Day Day

6.00 6.00 0.39 10.79

35.00 25.00 1.49 1.49

0.50 1.48 1.00 3.00

301.00 301.00 273.00 247.00 Total: 3654.66

Add water charges @ 1% on

Add C.P & OH @15% on 3691.21 Cost for 12.125 m Rate per One Metre: Rate as per DSR-12:

Rs 350.09 Rs 350.10

Item Code: 12.7.1 P/F 15cm wide 45cm over all semi-circular plain GS sheet gutter 0.80 mm thick . Details of Cost for : 9.04 m Code Description Unit Quantity 0.80mm thick with zinc coating not less than 275gm/sqm

0992 2302 1008 1022 1024 1210 1208 9999 9999 0102 0114 9999 0130 0102 0112 0114

Consider a length of 9.04m Sheet used = 2.5x0.90m = 2 nos. Wt. = 2x15.82=31.64 Kg. = 0.3164quintal G.I. plain sheets Carriage of sheets Flats upto 10 mm in thickness Galvanised steel bolts and nuts 6 mm dia and 25 mm long round head with slot Galvanised steel bolts and nuts 10 mm dia and 125 mm long G.I. plain washers thin Bitumen washers Carriage of G.I. seam bolts and washers Sundries LABOUR: Blacksmith first class Beldar Sundries Mistry Blacksmith first class Carpenter 2nd class Beldar

Rate

quint tonne quint 10 No

0.3164 0.0316 0.0749 20.00

4750.00 77.87 4200.00 20.00

each

30.00

10.00

100 N 100 N L.S. L.S.

70.00 40.00 2.73 5.33

30.00 25.00 1.49 1.49

Day Day L.S. Day Day Day Day

0.50 0.50 12.61 0.28 0.84 0.62 1.68

301.00 247.00 1.49 301.00 301.00 273.00 247.00 Total: 3417.08

Add water charges @ 1% on

Add C.P & OH @15% on 3451.25 Cost for 9.04 m Rate per One Metre: Rate as per DSR-12:

Rs 439.04 Rs 439.05

Item Code: 12.7.2

DSR-12

Page 455 of 2298

P/F 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter - 0.63 mm thick . Details of Cost for : 9.04 m Code Description Unit Quantity 0.63mm thick with zinc coating not less than 275gm/sqm

0992 2302 1008 1022 1024 1210 1208 9999 9999 0102 0114 9999 0130 0102 0112 0114

Consider a length of 9.04m Sheet used = 2.5x0.90m = 2 nos. Wt. = 2x11.82=23.64 Kg. = 0.2364quintal G.I. plain sheets Carriage of sheets Flats upto 10 mm in thickness Galvanised steel bolts and nuts 6 mm dia and 25 mm long round head with slot Galvanised steel bolts and nuts 10 mm dia and 125 mm long G.I. plain washers thin Bitumen washers Carriage of G.I. seam bolts and washers Sundries L.S. LABOUR: Blacksmith first class Beldar Sundries Mistry Blacksmith first class Carpenter 2nd class Beldar

Rate

quint tonne quint 10 No

0.2364 0.0236 0.0749 20.00

4750.00 77.87 4200.00 20.00

each

30.00

10.00

100 N 100 N L.S. L.S.

70.00 40.00 2.73 5.33

30.00 25.00 1.49 1.49

Day Day L.S. Day Day Day Day

0.50 0.50 12.61 0.28 0.84 0.62 1.68

301.00 247.00 1.49 301.00 301.00 273.00 247.00 Total: 3036.46

Add water charges @ 1% on

Add C.P & OH @15% on 3066.82 Cost for 9.04 m Rate per One Metre: Rate as per DSR-12:

Rs 390.14 Rs 390.15

Item Code: 12.8 Providing Non-asbestos high impact Polypropylne RC 6mm thick corrugated sheet Details of Cost for : 216.14 Sqm Code Description Unit Quantity Upto 60 degree pitch Consider a shed of 20x10 metres. (External dimensions of plinth). Area of roof20.2x10.70m = 216.14 sqm. MATERIALS: Sheets used = 2x20 nos. x3.00 mx 1.05m= 126.00sqm+ 2x20nos.x2.50mx1.05m=105.00sqm. = 231.00sqm. + Add 3% wastage = 6.93 = 237.93sqm. 0223 Non - Asbestos fibre cement corrugated sheet 6mm thick. sqm 237.93

Rate

250.00

2x20x0.42147= 1.68588 + 2x20x0.35123= 1.4049 = 3.0908+ Add 3 % wastage = 0.092 = 3.1835 Say 3.184 t

DSR-12

Page 456 of 2298

2273 1023 1208 1209 9999 9999 0130 0112 0114

Carriage of sheets G.I. J or L hooks with nuts and bolts 8 mm dia Bitumen washers Bitumen washers thick Carriage of bolts and nuts, washers etc. Sundries LABOUR: Mistry Carpenter 2nd class Beldar

tonne 10 No 100 N 100 N L.S. L.S. Day Day Day

3.184 476.00 476.00 476.00 8.06 39.52

77.87 90.00 25.00 32.00 1.49 1.49

2.34 9.34 9.34

301.00 273.00 247.00 Total: 69917.79

Add water charges @ 1% on

Add C.P & OH @15% on 70616.97 Cost for 216.14 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 375.73 Rs 375.75

Item Code: 12.9 Extra for straight cutting in non-asbestos high impact polypropylene RC corrugated, semi- corrugated 6mm thick sheet for chimney, skylight etc Details of Cost for : 3.00 m Code Description Unit Quantity Rate Details of cost for 3 metres of periphery Area of cutting 0.9mx0.6m=0.54sqm. Perimeter = 3 metres LABOUR: 0111 Carpenter 1st class Day 0.12 301.00 0114 Beldar Day 0.12 247.00 Total: Add water charges @ 1% on 65.76 Add C.P & OH @15% on 66.42 Cost for 3.00 m Rate per One Metre: Rate as per DSR-12:

Rs 25.46 Rs 25.45

Item Code: 12.10 Extra for circular cutting in non-asbestos high impact polyropylene RC corrugated /semi-corrugated 6mm thick sheet

Code

0111 0114

Details of Cost for : 9.05 m Description Unit Quantity Details of cost for 4 holes of 0.72 metre diameter i.e. 9.05 metre periphery LABOUR: Carpenter 1 st class Day 1.00 Beldar Day 1.00 Add water charges @ 1% on

Rate

301.00 247.00 Total: 548.00

Add C.P & OH @15% on 553.48 Cost for 9.05 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 70.33 Rs 70.35

Page 457 of 2298

Item Code: 12.11 Extra for P/F wind ties 40x6 mm flat Code

1008 2205 9999 0102 0114

Details of Cost for : 30.00 m Description Unit Quantity Extra for providing and fixing wind ties of 40x6mm flat iron section. M.S. flat 40x6mm = 30 metres+ wastage @ 5% = 1.5 metres = 31.50 metres @ 1.9 Kg per metre = 59.85 Kg. = 0.5985 quintal Flats upto 10 mm in thickness quint 0.5985 Carriage of sheet tonne 0.06 Sundries L.S. 20.67 Blacksmith first class Day 0.50 Beldar Day 0.50 Add water charges @ 1% on

Rate

4200.00 77.87 1.49 301.00 247.00 Total: 2823.17

Add C.P & OH @15% on 2851.40 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 109.30 Rs 109.30

Item Code: 12.12.1 P/F ridges and hips in non-asbestos fiber cement high impact polypropylene reinforced roofing accessories Corrugated serrated adjustable ridges. Details of Cost for : 20.20 m Code Description Unit Quantity Rate One piece corrugated serrated adjustable ridges Consider a shed of 20x10m (external dimensions at plinth).

0225 9999 9999 0130 0112 0114

Length of ridges 20.2 metre MATERIALS: Ridge piece required each of 1.22mm length = 19nos. + Add 5% wastage = 0.95 No. 19.95 Nos x 1.22 = 24.339 metre Non - Asbestos fibre cement corrugate serrated adjustable ridge. Carriage (The ridge is to be fixed with the same hooks as the Sheets) Sundries LABOUR: Mistry Carpenter 2nd class Beldar

metre

24.339

200.00

L.S.

13.52

1.49

L.S.

6.76

1.49

Day Day Day

0.14 0.55 1.64

301.00 273.00 247.00 Total: 5495.38

Add water charges @ 1% on

Add C.P & OH @15% on 5550.33 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

Rs 315.98 Rs 316.00

Item Code: 12.12.2

DSR-12

Page 458 of 2298

P/F ridges and hips in non-asbestos fiber cement high impact polypropylene reinforced roofing accessories Plain wing adjustable ridges. Details of Cost for : 20.20 m Code Description Unit Quantity Rate Plain wing adjustable ridges Consider a shed of 20x10m (external dimensions at plinth).

0226 9999 9999 0130 0112 0114

Length of ridges 20.2 metre MATERIALS: Ridge piece required each of 1.22m length = 19 nos. + Add 5% wastage = 0.95 No. 19.95 nos x 1.22 = 24.339 metre Non - Asbestos fibre cement plain wing adjustable ridge.

metre

Carriage (The ridge is to be fixed with the same hooks as the L.S. Sheets) Sundries L.S. LABOUR: Mistry Day Carpenter 2nd class Day Beldar Day

24.339

200.00

13.52

1.49

6.76

1.49

0.14 0.55 1.64

301.00 273.00 247.00 Total: 5495.38

Add water charges @ 1% on

Add C.P & OH @15% on 5550.33 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

Rs 315.98 Rs 316.00

Item Code: 12.12.3 P/F ridges and hips in non-asbestos fiber cement high impact polypropylene reinforced roofing accessories Close fitting adjustable ridges. Details of Cost for : 20.20 m Code Description Unit Quantity Rate Close fitting adjustable ridges Consider a shed of 20x10m (external dimensions at plinth).

0224 9999 9999 0130 0112 0114

Length of ridges 20.2 metre No. of ridge pairs required, of length 1.22m each = 22.00 nos. + Add 5% wastage =1.10 Nos. = 23.10 nos.x 1.22= 28.182 metre Non - Asbestos fibre cement close fitting adjustable ridge. Carriage Sundries LABOUR: Mistry Carpenter 2nd class Beldar

metre

28.182

200.00

L.S. L.S.

16.12 7.15

1.49 1.49

Day Day Day

0.14 0.55 1.64

301.00 273.00 247.00 Total: 6268.44

Add water charges @ 1% on

Add C.P & OH @15% on 6331.12 Cost for 20.20 m Rate per One Metre:

DSR-12

Rs 360.44

Page 459 of 2298

Rate as per DSR-12:

Rs 360.45

Item Code: 12.12.4 P/F ridges and hips in non-asbestos fiber cement high impact polypropylene reinforced roofing accessories hips. Details of Cost for : 20.20 m Code Description Unit Quantity Unserrated adjustable hips Consider a shed with hip as 20.2 metres No. of hi pieces required = 19 pairs Length of each pair 1.22 metres Add 5 % wastage = 0.95 pairs = 19.95 pairs x 1.22 = 24.339 metre 0227 Non - Asbestos fibre cement unserrated adjustable ridge for metre 24.339 hips. 9999 Carriage L.S. 6.76 9999 Sundries L.S. 6.63 LABOUR: 0130 Mistry Day 0.14 0112 Carpenter 2nd class Day 0.55 0114 Beldar Day 1.64 Add water charges @ 1% on

Unserrated adjustable

Rate

280.00 1.49 1.49 301.00 273.00 247.00 Total: 7432.24

Add C.P & OH @15% on 7506.56 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

Rs 427.35 Rs 427.35

Item Code: 12.13.1 P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Corrugated Apron pieces.

Code

0228 9999 9999 0130 0112 0114

Description Details for shed of 20.2 metres completed length MATERIALS: Corrugated appron pieces of 1.12 metre length = 20 nos.+ Add 5% wastage = 1.0 No. = 21 nos.x 1.12=23.52 metre Non - Asbestos fibre cement corrugated appron piece. Carriage of appron pieces. (The appron pieces are to be fixed with the same hooks as the s Sundries LABOUR: Mistry Carpenter 2nd class Beldar

Details of Cost for : 20.20 m Unit Quantity

metre L.S.

Rate

23.52 3.25

200.00 1.49

L.S.

3.25

1.49

Day Day Day

0.07 0.28 0.82

301.00 273.00 247.00 Total: 5013.73

Add water charges @ 1% on

Add C.P & OH @15% on 5063.87 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 288.29 Rs 288.30

Page 460 of 2298

Item Code: 12.13.2 P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Eave's filler pieces.

Code

0229 9999 9999 0130 0112 0114

Details of Cost for : 20.20 m Description Unit Quantity Details of eaves filler for a shed of 20.2 metres complete length MATERIALS: Eaves filler pieces of 1.016 metres length = 20 nos.+ Add 5% wastage = 1.0 No. = 21 nos. Non - Asbestos fibre cement eaves filler piece. each 21.00 (The eaves filler pieces are to be fixed with the same hooks as L.S. 3.25 the sheets) Sundries L.S. 3.25 LABOUR: Mistry Day 0.07 Carpenter 2nd class Day 0.28 Beldar Day 0.82 Add water charges @ 1% on

Rate

150.00 1.49 1.49 301.00 273.00 247.00 Total: 3459.73

Add C.P & OH @15% on 3494.33 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

Rs 198.93 Rs 198.95

Item Code: 12.13.3 P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories North light curves. Details of Cost for : 20.20 m Code Description Unit Quantity Details of North light curve 20.2 metres long complete length

0230 1023 1209 1208 9999 9999 0130 0112 0114

MATERIALS: North light curves of 1.016 metres nominal length = 20 nos. + Add 5% wastage = 1.0 No. = 21 nos.x 1.016 = 21.336 metre Non - Asbestos fibre cement north light curves. G.I. J or L hooks with nuts and bolts 8 mm dia Bitumen washers Bitumen washers thick Carriage of hooks, nuts, washers and curves Sundries LABOUR: Mistry Carpenter 2nd class Beldar

metre 10 No 100 N 100 N L.S. L.S. Day Day Day

Rate

21.336 40.00 40.00 40.00 9.88 6.24

310.00 90.00 32.00 25.00 1.49 1.49

0.10 0.30 1.00

301.00 273.00 247.00 Total: 7379.98

Add water charges @ 1% on

Add C.P & OH @15% on 7453.78 Cost for 20.20 m Rate per One Metre:

DSR-12

Rs 424.35

Page 461 of 2298

Rate as per DSR-12:

Rs 424.35

Item Code: 12.13.4 P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Ventilator curves. Details of Cost for : 20.20 m Code Description Unit Quantity Details of ventilator curve 20.2 metres long complete length

Rate

MATERIALS: North light curves of 1.016 metres nominal length = 20 nos. +

0231 1023 1209 1208 9999 9999 0130 0112 0114

Add 5% wastage = 1.0 No. = 21 nos.x 1.016 = 21.336 metre Non - Asbestos fibre cement ventilator curves. G.I. J or L hooks with nuts and bolts 8 mm dia Bitumen washers Bitumen washers thick Carriage of hooks, nuts, washers and curves Sundries LABOUR: Mistry Carpenter 2nd class Beldar

each 10 No 100 N 100 N L.S. L.S. Day Day Day

21.336 40.00 40.00 40.00 9.88 6.24

390.00 90.00 32.00 25.00 1.49 1.49

0.10 0.30 1.00

301.00 273.00 247.00 Total: 9086.86

Add water charges @ 1% on

Add C.P & OH @15% on 9177.73 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

Rs 522.49 Rs 522.50

Item Code: 12.13.5 P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Barge boards. Details of Cost for : 9.70 m Code Description Unit Quantity Completed length of barge boards MATERIALS: Barge boards 2.50metres = 4 nos. x 2.50 = 10.00 metre Add 5% wastage = 0.50 metre. = 10.50 metre. 0232 Non - Asbestos fibre cement barge boards 6 mm thick. metre 10.50 0222 Seam bolts and nuts 6 mm dia and 25 mm long 10 No 5.00 1211 G.I. plain washers 100 N 10.00 1208 Bitumen washers 100 N 5.00 9999 Carriage of barge boards, bolts, nuts and washers L.S. 9.36 9999 Sundries L.S. 6.76 LABOUR: 0130 Mistry Day 0.04 0112 Carpenter 2nd class Day 0.06 0114 Beldar Day 0.40 Add water charges @ 1% on

Rate

395.00 35.00 32.00 25.00 1.49 1.49 301.00 273.00 247.00 Total: 4320.69

Add C.P & OH @15% on 4363.90 Cost for 9.70 m Rate per One Metre:

DSR-12

Rs 517.37

Page 462 of 2298

Rate as per DSR-12:

Rs 517.35

Item Code: 12.13.6 P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Ridge finials. Details of Cost for : 1.00 pairs Code Description Unit Quantity Details of a pair of ridge finials MATERIALS: Ridge finials = 1pair Add 5% wastage = 0.05pair. = 1.05 pair 0233 Non - Asbestos fibre cement ridge finial. pair 1.05 9999 Carriage, sundries, fixing charges including L.S. 10.79 Add water charges @ 1% on

Rate

140.00 1.49 Total: 163.08

Add C.P & OH @15% on 164.71 Cost for 1.00 pairs Rate per Each Pair: Rate as per DSR-12:

Rs 189.42 Rs 189.40

Item Code: 12.13.7 P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Special North light curves.

Code

0234 1023 1209 1208 9999 9999 0130 0112 0114

Description Details of special north light ventilator curve 20.2 metres long complete length MATERIALS: Special north light curves of 1.016 metres nominal length = 20 nos. + Add 5% wastage = 1.0 No. = 21 nos. Non - Asbestos fibre cement special north light curves. G.I. J or L hooks with nuts and bolts 8 mm dia Bitumen washers Bitumen washers thick Carriage of hooks, nuts, washers and curves Sundries LABOUR: Mistry Carpenter 2nd class Beldar

Details of Cost for : 20.00 Nos Unit Quantity

each 10 No 100 N 100 N L.S. L.S. Day Day Day

Rate

21.00 40.00 40.00 40.00 9.88 6.24

514.00 90.00 32.00 25.00 1.49 1.49

0.10 0.30 1.00

301.00 273.00 247.00 Total: 11559.82

Add water charges @ 1% on

Add C.P & OH @15% on 11675.42 Cost for 20.00 Nos Rate per Each: Rate as per DSR-12:

Rs 671.34 Rs 671.35

Item Code: 12.13.8 P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories S type louvers. Details of Cost for : 8.74 m Code Description Unit Quantity

DSR-12

Rate

Page 463 of 2298

0235 9999 1031 1032 1208 1210 9999 9999 0111 0114 0102

MATERIALS: S type louvers = 5 nos.+ Add 5% wastage = 0.25 nos. = 5.25 nos. Non - Asbestos fibre cement S type louvers. Carriage Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanis Galvanised steel bolts 10 mm dia and 7 cm long with nuts Bitumen washers G.I. plain washers thin Carriage of bolts and nuts and washers Sundries LABOUR: Carpenter 1st class Beldar Blacksmith 1st class

each L.S. each

5.25 10.79 6.00

250.00 1.49 20.00

each

6.00

15.00

100 N 100 N L.S. L.S.

18.00 36.00 2.73 13.39

25.00 30.00 1.49 1.49

1.00 1.00 0.12

301.00 247.00 301.00 Total: 2162.02

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 2183.64 Cost for 8.74 m Rate per One Metre: Rate as per DSR-12:

Rs 287.32 Rs 287.30

Item Code: 12.14 Providing flat iron brackets 50x3mm size for fixing non- asbestos cement/ GS sheets gutters with purlins Details of Cost for : 20.00 m Code Description Unit Quantity MATERIAL: Flat 5 0x3 mm size 1008 Flats up to 10 mm in thickness quint 0.1163 1025 M.S. bolts 6 mm dia and 25 mm long with 10 No 38.00 1210 G.I. plain washers thin 100 N 19.00 9999 Sundries L.S. 1.04 0102 Blacksmith 1 class Day 0.38 0114 Beldar Day 0.38 Add water charges @ 1% on

Rate

4200.00 25.00 30.00 1.49 301.00 247.00 Total: 798.95

Add C.P & OH @15% on 806.94 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 46.40 Rs 46.40

Item Code: 12.15.1 Painting top of roofs with bitumen @ 17 kg/ 10 sqm ...With residual type petroleum bitumen of grade VG - 10 Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 0309 Cost of Bitumen 80/100 tonne 0.017 37000.00 0771 Cost of kerosene oil litre 1.22 30.00 0370 Cost of fuel for heating (steam coal) quint 0.035 400.00 2211 Carriage of bitumen 80/100 tonne 0.017 87.60 0982 Coarse sand cum 0.06 1120.00

DSR-12

Page 464 of 2298

2203 0114 0131 9999

Carriage of coarse sand LABOUR: Beldar (for cleaning the surface, applying kerosene oil, heating materials and carrying t Painter Sundries (Brushes and T and P)

cum

0.06

87.60

Day

0.38

247.00

Day L.S.

0.15 13.52

273.00 1.49 Total: 908.50

Add water charges @ 1% on

Add C.P & OH @15% on 917.59 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 105.52 Rs 105.50

Item Code: 12.16.1 10cm thick mud phaska of damped brick earth on roofs laid to slope and covered with tile bricks of class 10 with CM 1:3 NonModular brick tiles Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: Mud Phuska = 1.048 cum. + Wastage 20% = 0.209 = 1.257 cum. 0811 Mud (dry) cum 1.257 50.00 03.018 Mud mortar Cum 0.263 301.12 Bhusa 0.263x35 = 9.20 + 5% wastage = 0.46 = 9.66 Kg. 0308 Bhusa quint 0.10 375.00 9999 Cowdung L.S. 5.33 1.49 9999 Mud mortar for gobri leaping L.S. 8.06 1.49 9999 Carriage of bhusa and cowdung L.S. 2.73 1.49 1984 Common burnt clay FPS brick tile class 10 1000 380.00 3100.00 2207 Carriage of tiles 1000 380.00 140.16 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) 0.061 3631.93 Rate as for item No. 3.3 1213 Integral water proofing compound 2% by weight of cement kilog 0.006 25.00 9999 0124 0114 0101

Sundries LABOUR: Mason 2nd class Beldar Bhisti

L.S.

6.76

1.49

Day Day Day

1.30 3.75 1.10

273.00 247.00 260.00 Total: 3233.74

Add water charges @ 1% on

Add C.P & OH @15% on 3266.08 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 375.60 Rs 375.60

Item Code: 12.17.1 10cm thick mud phaska of damped brick earth on roofs laid to slope and covered with machine moulded tile bricks of class 12.5 with CM 1:3 With machine moulded Non-Modular brick tiles. Details of Cost for : 10.00 Sqm

DSR-12

Page 465 of 2298

Code

0811 03.018

0308 9999 9999 9999 7904 2207 03.003 1213 9999 0124 0114 0101

Description Unit MATERIALS: Mud Phuska = 1.048 cum. Wastage 20% = 0.209 = 1.257 cum. Mud (dry) cum Mud mortar Cum Bhusa 0.263x35 = 9.20 5% wastage = 0.46 = 9.66 Kg. Say= 0.10 quintal. Bhusa quint Cowdung L.S. Mud mortar for gobri leaping L.S. Carriage of bhusa and cowdung L.S. Machine moulded common burnt clay tile bricks of class 1000 designation 12.5 Carriage of tiles 1000 Cement mortar 1:3 (1 cement : 3 fine sand) Cum Integral water proofing compound 2% by kilog weight of cement Sundries L.S. Labour: Mason 2nd class Day Beldar Day Bhisti Day

Quantity

Rate

1.257 0.263

50.00 301.12

0.10 5.33 8.06 2.73 380.00

375.00 1.49 1.49 1.49 3700.00

380.00 0.061 0.006

140.16 3631.93 25.00

6.76

1.49

1.30 3.75 1.10

273.00 247.00 260.00 Total: 3461.74

Add water charges @ 1% on

Add C.P & OH @15% on 3496.36 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 402.08 Rs 402.10

Item Code: 12.18 Extra for every addi 1cm thickness of mud phaska Code

0811 0114 0101 9999

Description MATERIALS:for 10 cm thickness. Mud Phuska = 1.048 cum. + Wastage 20% = 0.209 = 1.257 Quantity for ICM thickness 1.257/10=0.1257 Say 0.13 cum Mud Beldar Bhisti Labour for leaping and carring to roof

Details of Cost for : 10.00 Sqm Unit Quantity

cum Day Day L.S.

0.13 0.07 0.04 26.91

Add water charges @ 1% on

Rate

50.00 247.00 260.00 1.49 Total: 74.29

Add C.P & OH @15% on 75.03 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 8.63 Rs 8.65

Page 466 of 2298

Item Code: 12.19.1 P/L brick tiles of class 100 over mumty roofs grouted with CM 1:3 12mm layer of CM 1:3 FPS brick tiles Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 1984 Common burnt clay FPS brick tile class 10 1000 380.00 2207 Carriage of tiles 1000 380.00 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) 0.179 1213 Integral water proofing compound 2% by weight of cement kilog 0.005

0124 0115 0101 9999

LABOUR: Mason 2nd class Coolie Bhisti Sundries

Day Day Day L.S.

0.81 1.08 0.27 1.82

Add water charges @ 1% on

Rate 3100.00 140.16 3631.93 25.00

273.00 247.00 260.00 1.49 Total: 2442.31

Add C.P & OH @15% on 2466.73 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 283.67 Rs 283.65

Item Code: 12.20 P/L pressed clay brick tiles on roof laid over 20mm CM 1:4 Code 7266 2207 03.009 1213

03.009 0123 0114 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS: Pressed clay tiles Carraige of Brick tiles Cement mortar 1:4 (1 cement : 4 coarse sand). Integral water proofing compound 2% by weight of cement

Cement mortar 1:4 (1 cement : 4 coarse sand). LABOUR : Mason I class Beldar Sundries

Rate

units 1000 Cum

160.00 160.00 0.037

12150.00 140.16 3485.41

kilog Cum

0.01 0.224

25.00 3485.41

Day Day L.S.

0.60 2.60 13.00

301.00 247.00 1.49 Total: 3718.54

Add water charges @ 1% on

Add C.P & OH @15% on 3755.73 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 431.91 Rs 431.90

Item Code: 12.21.1 Providing gola 75x75mm in CC 1:2:4 in 75 x 75 chase Code

0297 2202 0982

DSR-12

Description Details of cost for 10 metres cement concrete MATERIALS: Stone Aggregate (Single size): 10 mm nominal size Carriage of Stone Aggregate below 40 mm Coarse sand

Details of Cost for : 10.00 m Unit Quantity

cum cum cum

0.0836 0.0836 0.0418

Rate

1050.00 87.60 1120.00

Page 467 of 2298

2203 0367 2209 0114 0115 0101 0123 0124 0128 9999 9999 0123 0124 9999 0123 0124 0114 9999 03.003 0155 0115 0101 9999 9999

Carriage of coarse sand Portland cement Carriage of cement Beldar LABOUR: Coolie Bhisti Mason 1 st class Mason 2nd class Mate Hire and running charge of mechanical mixer Sundries Mason 1 st class Mason 2nd class Sundries Mason 1st class Mason 2nd class Beldar Carriage Cement mortar 1:3 (1 cement : 3 fine sand) Mason Coolie Bhisti Hire and running charges of mechanical mixer Sundries

cum tonne tonne Day

0.0418 0.03 0.03 0.085

87.60 5000.00 77.87 247.00

Day Day Day Day Day L.S. L.S. Day Day L.S. Day Day Day L.S.

0.056 0.025 0.005 0.005 0.0037 2.47 1.30 0.15 0.15 5.07 0.25 0.25 1.00 8.06 0.009 0.081 0.101 0.033 1.69 1.43

247.00 260.00 301.00 273.00 260.00 1.49 1.49 301.00 273.00 1.49 301.00 273.00 247.00 1.49 3631.93 287.00 247.00 260.00 1.49 1.49 Total: 938.99

Day Day Day L.S. L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 948.38 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 109.06 Rs 109.05

Item Code: 12.22 Making khurras 45x45cm with min thickness 5cm CC 1:2:4 Code 0295 0297 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0128 9999 9999 3002 03.008 0155 0115 0101

DSR-12

Description Stone Aggregate (Single size): 20 mm nominal size Stone Aggregate (Single size): 10 mm nominal size Carriage of Stone Aggregate below 40 mm nominal size Coarse sand Carriage of coarse sand Portland cement Carriage of cement Beldar Coolie Bhisti Mason 1 st class Mason 2nd class Mate Hire and running charge of mechanical mixer Sundries PVC sheet 400 micron thick Cement mortar 1:3 (1 cement : 3 coarse sand) (Rate as per item No. 3.8) Mason Coolie Bhisti

Details of Cost for : 1.00 No. Unit Quantity cum 0.0067 cum 0.0022 cum 0.0089 cum 0.0044 cum 0.0044 tonne 0.0032 tonne 0.0032 Day 0.009 Day 0.006 Day 0.0027 Day 0.0005 Day 0.0005 Day 0.0004 L.S. 0.26 L.S. 0.13 sqm 1.00 0.0041 Day Day Day

0.0235 0.0235 0.0078

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87 247.00 247.00 260.00 301.00 273.00 260.00 1.49 1.49 31.00 4145.53 287.00 247.00 260.00

Page 468 of 2298

9999 0367 2209 0155 0115 9999 9999

Sundries Portland cement Carriage of cement Mason Coolie Rounding of edges and making outlet Sundries

L.S. tonne tonne Day Day L.S. L.S.

0.39 0.0006 0.0006 0.008 0.008 0.26 13.52

Add water charges @ 1% on

1.49 5000.00 77.87 287.00 247.00 1.49 1.49 Total: 128.08

Add C.P & OH @15% on 129.36 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 148.76 Rs 148.75

Item Code: 12.23.1.1 Providing sand stone slab for roofing and laying them in CM 1 : 4 over wooden karries or R.C.C. battens : Red sand stone slab : 40 to 50 mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS : 1174 Stone slab including wastage @ 10% = 11 sqm sqm 11.00 165.00 2216 Carriage of slab tonne 1.27 77.87 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.0095 3485.41 (Rate as per item No. 3.9) 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) 0.0075 3631.93 Rate as per item No. 3.3 LABOUR: 0155 Mason Day 1.52 287.00 0100 Bandhani Day 1.82 260.00 0115 Coolie Day 1.52 247.00 0101 Bhisti Day 0.30 260.00 9999 Sundries L.S. 16.12 1.49 Total: Add water charges @ 1% on 3361.14 Add C.P & OH @15% on 3394.75 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 390.40 Rs 390.40

Item Code: 12.23.2.1 Providing sand stone slab for roofing and laying them in CM 1 : 4 over wooden karries or R.C.C. battens : White sand stone slab : 40 to 50 mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS : 1175 Stone Slab including wastage @ 10% = 11sqm sqm 11.00 185.00 2216 Carriage of slab tonne 1.27 77.87 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.0095 3485.41 (Rate as per item No. 3.9) 0155 Mason Day 1.52 287.00 0100 Bandhani Day 1.82 260.00 0115 Coolie Day 1.52 247.00 0101 Bhisti Day 0.30 260.00 9999 Sundries L.S. 16.12 1.49

DSR-12

Page 469 of 2298

03.003

Cement mortar 1:3 (1 cement : 3 fine sand) Rate as per item No. 3.3

0.0075

3631.93

Add water charges @ 1% on

Total: 3581.14

Add C.P & OH @15% on 3616.95 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 415.95 Rs 415.95

Item Code: 12.24.1.1 P/F insulating board ceiling with n/a nails etc complete Natural colour insulating board 12 mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIAL :0332 Insulating board including 10% wastage = sqm 11.00 11.00Sqm. 9999 Carriage of material L.S. 17.55 9999 Nails L.S. 26.91 LABOUR: 0111 Carpenter 1st class Day 2.50 0114 Beldar Day 2.00 9999 Scaffolding L.S. 31.07 9999 Sundries L.S. 31.07 Add water charges @ 1% on

Rate 270.00 1.49 1.49 301.00 247.00 1.49 1.49 Total: 4375.33

Add C.P & OH @15% on 4419.08 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 508.19 Rs 508.20

Item Code: 12.24.2.1 P/F insulating board ceiling with n/a nails etc complete White face insulating board 12 mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIAL :0328 White face insulating board 12 mm thick i/c sqm 11.00 10% wastage 11 Sqm. 9999 Carriage of material L.S. 17.55 9999 Nails L.S. 26.91 LABOUR: 0111 Carpenter 1st class Day 2.50 0114 Beldar Day 2.00 9999 Scaffolding L.S. 31.07 9999 Sundries L.S. 31.07 Add water charges @ 1% on

Rate 360.00 1.49 1.49 301.00 247.00 1.49 1.49 Total: 5365.33

Add C.P & OH @15% on 5418.98 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 623.18 Rs 623.20

Page 470 of 2298

Item Code: 12.24.3.1 P/F insulating board ceiling with n/a nails etc complete Flame retardent face insulating board 12mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIAL :0336 Flame retardent face insulating board 12 mm thick including sqm 11.00 10% wastage 11.00 Sqm. 9999 Carriage of material L.S. 17.55 9999 Nails L.S. 26.91 LABOUR: 0111 Carpenter 1 st class Day 2.50 0114 Beldar Day 2.00 9999 Scaffolding L.S. 31.07 9999 Sundries L.S. 31.07 Add water charges @ 1% on

Rate 315.00 1.49 1.49 301.00 247.00 1.49 1.49 Total: 4870.33

Add C.P & OH @15% on 4919.03 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 565.69 Rs 565.70

Item Code: 12.25.1 P/F flat pressed 3 layer particle board (Grade I) in ceiling 12 mm thick Code 0341 9999 9999 0111 0114 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS :Standard quality board 12mm thick including 10% wastage = 11. Sqm. Carriage Nails LABOUR: Carpenter 1 st class Beldar Scaffolding Sundries

Rate

sqm

11.00

325.00

L.S. L.S.

14.95 26.91

1.49 1.49

Day Day L.S. L.S.

2.50 2.00 31.07 31.07

301.00 247.00 1.49 1.49 Total: 4976.46

Add water charges @ 1% on

Add C.P & OH @15% on 5026.22 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 578.02 Rs 578.00

Item Code: 12.26.1 P/F plain multipurpose cement board in ceiling 6 mm thick cement board Code 0236 9999 9999 0111 0114

DSR-12

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS :Non - Asbestos multi purpose fibre cement board 6mm thick. sqm Carriage Nails LABOUR: Carpenter 1st class Beldar

Rate

11.00

182.00

L.S. L.S.

14.95 26.91

1.49 1.49

Day Day

2.50 2.00

301.00 247.00

Page 471 of 2298

9999 9999

Scaffolding Sundries

L.S. L.S.

31.07 31.07

Add water charges @ 1% on

1.49 1.49 Total: 3403.46

Add C.P & OH @15% on 3437.49 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 395.31 Rs 395.30

Item Code: 12.27.1 Extra for Circular cutting and waste in ceiling with 2nd class teak wood planks 20 mm thick Details of Cost for : 15.71 m Code Description Unit Quantity MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. + Wastage @ 10% = 0.19 sqm. = 2.15 sqm. 1190 Teak wood 2nd class cum 0.043 2204 Carriage cum 0.043 0637 M.S. screws 40 mm long 100 N 31.00 LABOUR: 0111 Carpenter 1 st class Day 2.65 0112 Carpenter 2nd class Day 0.145 0114 Beldar Day 2.79 9999 Scaffolding L.S. 7.80 9999 Sundries L.S. 14.69 Add water charges @ 1% on

Rate

72000.00 100.11 50.00 301.00 273.00 247.00 1.49 1.49 Total: 4675.68

Add C.P & OH @15% on 4722.44 Cost for 15.71 m Rate per One Metre: Rate as per DSR-12:

Rs 345.69 Rs 345.65

Item Code: 12.27.2.1 Extra for Circular cutting and waste in ceiling with Natural colour insulating board 12 mm thick Details of Cost for : 15.71 m Code Description Unit Quantity MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. + Wastage @ 10% = 0.19 sqm. = 2.15 sqm. 0332 Insulating board sqm 2.15 9999 Carriage L.S. 3.38 9999 NailsL.S. 5.33 LABOUR: 0111 Carpenter 1st class Day 0.49 0114 Beldar Day 0.39 9999 Scaffolding L.S. 6.11 9999 Sundries L.S. 6.11 0111 Carpenter 1 st class Day 2.50 0114 Beldar Day 2.50 9999 Scaffolding L.S. 10.79

DSR-12

Rate

270.00 1.49 1.49 301.00 247.00 1.49 1.49 301.00 247.00 1.49

Page 472 of 2298

Add water charges @ 1% on

Total: 2241.58

Add C.P & OH @15% on 2264.00 Cost for 15.71 m Rate per One Metre: Rate as per DSR-12:

Rs 165.73 Rs 165.75

Item Code: 12.27.3.1 Extra for Circular cutting and waste in ceiling with White face insulating board 12 mm thick Details of Cost for : 15.71 m Code Description Unit Quantity MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. + Wastage @ 10% = 0.19 sqm. = 2.15 sqm. 0328 Insulating board sqm 2.15 9999 Carriage L.S. 3.38 9999 NailsL.S. 5.33 LABOUR: 0111 Carpenter 1st class Day 0.49 0114 Beldar Day 0.39 9999 Scaffolding L.S. 6.11 9999 Sundries L.S. 6.11 0111 Carpenter 1st class Day 2.50 0114 Beldar Day 2.50 9999 Scaffolding L.S. 10.79 Add water charges @ 1% on

Rate

360.00 1.49 1.49 301.00 247.00 1.49 1.49 301.00 247.00 1.49 Total: 2435.08

Add C.P & OH @15% on 2459.43 Cost for 15.71 m Rate per One Metre: Rate as per DSR-12:

Rs 180.03 Rs 180.05

Item Code: 12.27.4.1 Extra for Circular cutting and waste in ceiling with Flame retardent face insulating board 12 mm thick Details of Cost for : 15.71 m Code Description Unit Quantity MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. + Wastage @ 10% = 0.19 sqm. = 2.15 sqm. 0336 Insulating board sqm 2.15 9999 Carriage L.S. 3.38 9999 NailsL.S. 5.33 LABOUR: 0111 Carpenter 1st class Day 0.49 0114 Beldar Day 0.39 9999 Scaffolding L.S. 6.11 9999 Sundries L.S. 6.11 0111 Carpenter 1 st class Day 2.50 0114 Beldar Day 2.50 9999 Scaffolding L.S. 10.79

DSR-12

Rate

315.00 1.49 1.49 301.00 247.00 1.49 1.49 301.00 247.00 1.49

Page 473 of 2298

Add water charges @ 1% on

Total: 2338.33

Add C.P & OH @15% on 2361.71 Cost for 15.71 m Rate per One Metre: Rate as per DSR-12:

Rs 172.88 Rs 172.90

Item Code: 12.27.5.1 Extra for Circular cutting and waste in ceiling with Standard quality hard board sheet 3 mm thick Details of Cost for : 15.71 m Code Description Unit Quantity MATERIALS :0.5 metre dia. each = 10x22/7x0.5= 15.71m Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. + Wastage @ 10% = 0.19 sqm. = 2.15 sqm. 0994 Insulating board sqm 2.15 9999 Carriage L.S. 2.73 9999 NailsL.S. 5.33 LABOUR: 0111 Carpenter 1 st class Day 0.49 0114 Beldar Day 0.39 9999 Scaffolding L.S. 6.11 9999 Sundries L.S. 6.11 0111 Carpenter 1st class Day 2.50 0114 Beldar Day 2.50 9999 Scaffolding L.S. 10.79 Add water charges @ 1% on

Rate

110.00 1.49 1.49 301.00 247.00 1.49 1.49 301.00 247.00 1.49 Total: 1896.61

Add C.P & OH @15% on 1915.58 Cost for 15.71 m Rate per One Metre: Rate as per DSR-12:

Rs 140.22 Rs 140.20

Item Code: 12.27.5.2 Extra for Circular cutting and waste in ceiling with Standard quality hard board sheet 4.5 mm thick Details of Cost for : 15.71 m Code Description Unit Quantity MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. + Wastage @ 10% = 0.19 sqm. = 2.15 sqm. 0996 Insulating board sqm 2.15 9999 Carriage L.S. 2.86 9999 NailsL.S. 5.33 LABOUR: 0111 Carpenter 1 st class Day 0.49 0114 Beldar Day 0.39 9999 Scaffolding L.S. 6.11 9999 Sundries L.S. 6.11 0111 Carpenter 1 st class Day 2.50 0114 Beldar Day 2.50 9999 Scaffolding L.S. 10.79

DSR-12

Rate

130.00 1.49 1.49 301.00 247.00 1.49 1.49 301.00 247.00 1.49

Page 474 of 2298

Add water charges @ 1% on

Total: 1939.80

Add C.P & OH @15% on 1959.20 Cost for 15.71 m Rate per One Metre: Rate as per DSR-12:

Rs 143.42 Rs 143.40

Item Code: 12.28 Extra for P/F ceiling to curved surfaces in narrow widths Code 0111 0112 0114

Description LABOUR: Carpenter 1 st class Carpenter 2nd class Beldar

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day

1.00 1.00 2.00

Add water charges @ 1% on

Rate 301.00 273.00 247.00 Total: 1068.00

Add C.P & OH @15% on 1078.68 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 124.05 Rs 124.05

Item Code: 12.31.1 Providing 10 mm thick POP (gypsum anhydrous) ceiling - height of 5m above floor level - excluding frame work : Flat surfaces

Code

1196 2204 1219

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Wooden strips of 1 st class kail wood 72x40x0.25x0.06 = 43.20 cudm. + Add 10% wastage = 4.32 cudm. = 47.52 cudm or 0.0475cum First class kail wood in planks cum Carraige of Timber cum Wire nails kilog (Required for fixing the laths to frame) work including breakage and wastage of nails Rabbit wire mesh required for reinforcement =2.5x4 = 10.00sqm.+ 2% wastage =10.20sqm

1220

Wire mesh( rabbit) Plaster of paris - required : 2.5x4.0x10x1121/1000= 112.10 kg Add for plaster of paris joining into the side of laths 2.5x4.0x4.0032x1121 = 44.87 kg. = 156.97+ 40% wastage = 219.76 kg

sqm

0869 2308 9999

Plaster of paris Carraige of Plaster of paris Carriage of wiremesh and nails etc., LABOUR: Carpenter I class

kilog tonne L.S.

0111

DSR-12

Description

Day

Rate

0.04752 0.0475 0.75

30000.00 100.11 52.00

10.20

45.00

219.76 0.22 2.73

4.00 77.67 1.49

1.60

301.00

Page 475 of 2298

0114

Beldar For doing plaster of paris over wooden strips

Day

1.60

247.00

0122 0114 0101 9999

Mason (Special) Beldar Bhisthi Scaffolding

Day Day Day

3.23 3.23 0.54

301.00 247.00 260.00

9999

Sundries

L.S. L.S.

83.98 53.82

1.49 1.49 Total: 5821.12

Add water charges @ 1% on

Add C.P & OH @15% on 5879.33 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 676.12 Rs 676.15

Item Code: 12.31.2 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling :- Curved surfaces. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate Details of cost for 4.00x2.5=10sqm. MATERIALS :Wooden strips of 1st class kail wood 72x40x0.25x0.06 = 43.20 cudm. + Add 10% wastage = 4.32 cudm. = 47.52 1196 Kail wood cum 0.04752 30000.00 2204 Carriage of timber cum 0.0475 100.11 1219 Nail required for fixing the laths to frame work including kilog 0.75 52.00 breakage and wastage of nails Rabbit wire mesh required for reinforcement =2.5x4 = 10.00sqm.+ Add 2% wastage = 0.20 Sqm. = 10.2 sqm. 1220 Rabbit wire mesh sqm 10.20 45.00 Plaster of paris 2.5x4.0x10x1121/1000= 112.10 kg. Add for plaster of paris joining into the side of the laths2.5x4.0x4.0032x1121 = 44.87 kg. = 156.97+ Add 40% wastage = 62.79 = 219.76 0869 Plaster of Paris kilog 219.76 4.00 2308 Carriage of Plaster of Paris tonne 0.22 77.67 9999 Carriage of wiremesh and nails etc. L.S. 2.73 1.49 LABOUR: 0111 Carpenter Ist class Day 1.60 301.00 0114 Beldar Day 1.60 247.00 0122 Mason Day 3.23 301.00 0114 Beldar Day 3.23 247.00 0101 Bhisti Day 0.54 260.00 9999 Scaffolding L.S. 83.98 1.49 9999 Sundries L.S. 53.82 1.49 0111 Carpenter Ist class Day 0.50 301.00 0122 Mason Day 1.00 301.00 0114 Beldar Day 1.50 247.00 Total:

DSR-12

Page 476 of 2298

Add water charges @ 1% on

6643.12

Add C.P & OH @15% on 6709.55 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 771.60 Rs 771.60

Item Code: 12.32 Extra for any sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling. Details of Cost for : 10.00 Sqm Code Description Unit Quantity 0869 Plaster of Paris kilog 109.88 2308 Carriage of Plaster of Paris tonne 0.11 LABOUR: 0122 Mason Day 2.00 0114 Beldar Day 2.00 0101 Bhisti Day 0.25 9999 Scaffolding and Sundries L.S. 13.52 Add water charges @ 1% on

Rate 4.00 77.67 301.00 247.00 260.00 1.49 Total: 1629.20

Add C.P & OH @15% on 1645.49 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 189.23 Rs 189.25

Item Code: 12.33 Extra for providing plaster of Paris (Gypsum anhydrous) ceil- ing above 5 m height from floor level Details of Cost for : 10.00 units Code Description Unit Quantity Details of cost for l0sqm/metre height 9999 Scaffolding L.S. 13.52 LABOUR: 0122 Mason Day 1.00 0114 Beldar Day 1.00 0101 Bhisti Day 0.25 Add water charges @ 1% on

Rate 1.49 301.00 247.00 260.00 Total: 633.14

Add C.P & OH @15% on 639.47 Cost for 10.00 units Rate per Units: Rate as per DSR-12:

Rs 73.54 Rs 73.55

Item Code: 12.34 P/F thermal insulation ceiling with resin bonded fiber glass wool density 24 Kg/m3, 50 mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity Area for 10.00sqm. (Finished surface) = 10.00sqm.+ Add 10% for overlappings & wastage = 1.00sqm. = 11.00sqm. 7232 Resin Bonded Glass wool 24 kg/cum 50 mm thick sqm 11.00

DSR-12

Rate

204.00

Page 477 of 2298

9999 9999 0111 0114

Sundries including GI wire 20 SWG and Virgin polythene bags 200 gram GI chiken mesh 12.5mm x 24 SWG LABOUR: Carpenter 1st class Beldar

L.S.

104.00

1.49

L.S.

351.00

1.49

Day Day

1.00 2.00

301.00 247.00 Total: 3716.95

Add water charges @ 1% on

Add C.P & OH @15% on 3754.12 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 431.72 Rs 431.70

Item Code: 12.35 P/F thermal insulation with resin bonded fiber glass wool Density 16Kg/m3 50mm thick Details of Cost for : 10.00 Sqm Code Description Unit Quantity Area for 10.00sqm. (Finished surface) = 10.00sqm.+ Add 10% for overlappings & wastage = 1.00sqm. = 11.00sqm. 7231 Resin Bonded Glass wool 16 kg/cum 50 mm thick sqm 11.00 9999 Sundries including GI wire 20 SWG and Virgin polythene bags L.S. 52.00 200 gram LABOUR: 0111 Carpenter 1st class Day 0.50 0114 Beldar Day 0.50 Add water charges @ 1% on

Rate

145.00 1.49

301.00 247.00 Total: 1946.48

Add C.P & OH @15% on 1965.94 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 226.08 Rs 226.10

Item Code: 12.36.1 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive: With Type N-Normal 50 mm thick.

Code

7090 0314 9999 0111 0114

Description Cost of materials : Expanded Polystyrens lx10=10.00sqm. + Add wastage 10%= 1.00sqm. = 11.00sqm. Expanded polystyrene type N- Normal Adhesive Bitumen hot sealing compound : grade A Sundries LABOUR: Carpenter 1st class Beldar

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

sqm kilog L.S.

11.00 0.25 13.00

130.00 26.00 1.49

Day Day

0.50 0.50

301.00 247.00 Total: 1729.87

Add water charges @ 1% on

Add C.P & OH @15% on 1747.17 Cost for 10.00 Sqm

DSR-12

Page 478 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 200.93 Rs 200.90

Item Code: 12.36.2 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive: With type SE- self Extinguishing type 50 mm thick. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate Cost of materials : Expanded Polystyrens lx10=10.00sqm. + Add wastage 10% = 1.00sqm. = 11.00sqm. 7091 Expanded polystyrene type - SE sqm 11.00 155.00 0314 Adhesive bitumen grade ‘A’ kilog 0.25 26.00 9999 Sundries L.S. 13.00 1.49 LABOUR: 0111 Carpenter 1 st class Day 0.50 301.00 0114 Beldar Day 0.50 247.00 Total: Add water charges @ 1% on 2004.87 Add C.P & OH @15% on 2024.92 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 232.87 Rs 232.85

Item Code: 12.37.1 P?F 100mm dia rain water spout SW spout Code

3004 9999 9999 0124 0114 9999

Description Details of cost for 10 stone ware spout of 60cm long MATERIALS :Stone ware spouts 100 mm dia 60 cm long Carriage Mortar Labour for fixing and placing in position Mason 2nd class Beldar Sundries

Details of Cost for : 10.00 Nos Unit Quantity

Rate

each L.S. L.S.

10.00 13.52 13.52

33.00 1.49 1.49

Day Day L.S.

0.40 0.40 5.33

273.00 247.00 1.49 Total: 586.22

Add water charges @ 1% on

Add C.P & OH @15% on 592.08 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 68.09 Rs 68.10

Item Code: 12.38.1 P/FM.S. holder bat clamps...: 100 mm diameter Code 1331 9999

DSR-12

Description MATERIALS: MS holder bat clamps - For 100mm pipe Sundries

Details of Cost for : 5.00 Nos Unit Quantity each L.S.

5.00 7.15

Rate 17.00 1.49

Page 479 of 2298

9999 0116 0124 0114 0295 0297 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0128 9999 9999

C.C. block 5x0.1x0.1x0.1 = 0.005 cum Carriage of bat clamps Fitter grade-I Mason II class Beldar Stone aggregate 20mm Stone aggregate 10mm Carriage of 20mm aggregate Coarse sand Carriage of coarse sand Cement Carriage of cement LABOUR: Beldar Coolie Bhisthi Mason I class Mason II class Mate Hire charges of machine etc. Sundries

L.S. Day Day Day cum cum cum cum cum tonne tonne

2.47 0.125 0.75 0.50 0.0033 0.0011 0.0044 0.0022 0.0022 0.0016 0.0016

1.49 301.00 273.00 247.00 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day Day L.S. L.S.

0.0045 0.0032 0.0014 0.0003 0.0003 0.0002 0.26 0.13

247.00 247.00 260.00 301.00 273.00 260.00 1.49 1.49 Total: 484.06

Add water charges @ 1% on

Add C.P & OH @15% on 488.90 Cost for 5.00 Nos Rate per Each: Rate as per DSR-12:

Rs 112.45 Rs 112.50

Item Code: 12.38.2 P/FM.S. holder bat clamps...: 150 mm diameter Code 0886 9999 9999 0116 0124 0114 0295 0297 2202 0982 2203 0367 2209 0114 0115 0101 0123 0124 0128

DSR-12

Description MATERIALS: MS holdar bat clamps for sand cast iron or cast iron pipes 150 mm dia C.C. block 5x0.1x0.1x0.1 = 0.005 cum Sundries Carriage of bat clamps LABOUR: Fitter grade-I Mason II class Beldar MATERIALS: Stone aggregate 20mm Stone aggregate 10mm Carriage of 20mm aggregate Coarse sand Carriage of coarse sand Cement Carriage of cement LABOUR: Beldar Coolie Bhisthi Mason I class Mason II class Mate

Details of Cost for : 5.00 Nos Unit Quantity

Rate

each

5.00

25.00

L.S.

7.15

1.49

L.S.

2.47

1.49

Day Day Day

0.125 0.75 0.50

301.00 273.00 247.00

cum cum cum cum cum tonne tonne

0.0033 0.0011 0.0044 0.0022 0.0022 0.0016 0.0016

1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day Day

0.0045 0.0032 0.0014 0.0003 0.0003 0.0002

247.00 247.00 260.00 301.00 273.00 260.00

Page 480 of 2298

9999 9999

Hire charges of machine etc. Sundries

L.S. L.S.

0.26 0.13

Add water charges @ 1% on

1.49 1.49 Total: 524.06

Add C.P & OH @15% on 529.30 Cost for 5.00 Nos Rate per Each: Rate as per DSR-12:

Rs 121.74 Rs 121.80

Item Code: 12.39.1 Providing lead caulked joints to SCI RWP and fittings: 100 mm dia. pipe. Code 0865 1001 9999 9999 0116 0117 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS: Pig lead Spunyarn Kerosene oil fuel and sundries Carriage of materials LABOUR: Fitter Assistant fitter Beldar

Rate

kilog kilog L.S. L.S.

0.98 0.11 13.52 1.43

90.00 40.00 1.49 1.49

Day Day Day

0.06 0.06 0.12

301.00 273.00 247.00 Total: 178.95

Add water charges @ 1% on

Add C.P & OH @15% on 180.74 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 207.85 Rs 207.85

Item Code: 12.39.2 Providing lead caulked joints to SCI RWP and fittings: 150 dia. pipe. Code 0865 1001 9999 9999 0116 0117 0114

Description MATERIALS: Pig lead Spun yarn Kerosene oil fuel and sundries Carriage of materials LABOUR: Fitter Assistasnt fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

kilog kilog L.S. L.S.

1.48 0.17 13.52 2.73

90.00 40.00 1.49 1.49

Day Day Day

0.08 0.08 0.15

301.00 273.00 247.00 Total: 247.18

Add water charges @ 1% on

Add C.P & OH @15% on 249.65 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 287.10 Rs 287.10

Item Code: 12.40.1.1 P/F/E SCI accessories for RWP Sand cast iron plain shoes : 150 mm diameter

DSR-12

Page 481 of 2298

Code 0966 9999

Details of Cost for : 1.00 No. Unit Quantity

Description Details of cost for one shoe 150 mm sand cast iron plain shoe Carriage, fixing and mortar

each L.S.

1.00 17.55

Add water charges @ 1% on

Rate 325.00 1.49 Total: 351.15

Add C.P & OH @15% on 354.66 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 407.86 Rs 407.85

Item Code: 12.41.1 P/F UVC Rigid PVC rain water pipes - Single socket pipes 75 mm diametre. Code 7188 7190 9999 9999 0116 0114 0100 9999

Details of Cost for : 6.00 m Unit Quantity

Description MATERIALS: Cost of 6.00 metres pipe Seal rings Carriage of materials Adhesive, and sundries etc. LABOURFitter Beldar Bandhani Scaffolding etc.

Rate

metre nos L.S. L.S.

6.00 1.00 13.52 6.76

67.00 16.00 1.49 1.49

Day Day Day L.S.

0.19 0.37 0.08 18.59

301.00 247.00 260.00 1.49 Total: 645.29

Add water charges @ 1% on

Add C.P & OH @15% on 651.74 Cost for 6.00 m Rate per One Metre: Rate as per DSR-12:

Rs 124.92 Rs 124.90

Item Code: 12.41.2 P/F UPVC rain water pipes : Single socketed pipes. 110 mm diameter Code 7189 7191 9999 9999

0116 0114 0100 9999

Description

Details of Cost for : 6.00 m Unit Quantity

MATERIALS: UP_Rigid PVC pipe - (w.p. 4 kgf/sqcm) - 110mm dia single metre socket Seal ring for 110mm dia pipe nos Carriage of materials L.S. Adhesive, and sundries etc. L.S. LABOUR: Fitter grade-I Day Beldar Day Bandhani Day Scaffolding etc. L.S.

6.00

129.00

1.00

20.00

17.55

1.49

8.06

1.49

0.23 0.45 0.11

301.00 247.00 260.00

18.59

1.49 Total: 1068.84

Add water charges @ 1% on

DSR-12

Rate

Page 482 of 2298

Add C.P & OH @15% on 1079.53 Cost for 6.00 m Rate per One Metre: Rate as per DSR-12:

Rs 206.91 Rs 206.90

Item Code: 12.42.1.1 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Coupler : 75 mm.

Code 7192 7190 9999 9999

Description MATERIALS: Cost of coupler Seal rings Adhesive, and sundries etc. LABOURCarriage and fixing charges

Details of Cost for : 1.00 No. Unit Quantity

Rate

each nos L.S.

1.00 2.00 2.73

34.00 16.00 1.49

L.S.

9.36

1.49 Total: 84.02

Add water charges @ 1% on

Add C.P & OH @15% on 84.86 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 97.59 Rs 97.60

Item Code: 12.42.1.2 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Coupler : 110 mm.

Code 7193 7191 9999 9999

Description Details of cost for 1 coupler Cost of coupler Seal rings Adhesive, and sundries etc. Carriage and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each nos L.S. L.S.

1.00 2.00 2.73 10.79

Add water charges @ 1% on

Rate 52.00 20.00 1.49 1.49 Total: 112.15

Add C.P & OH @15% on 113.27 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 130.26 Rs 130.25

Item Code: 12.42.2.1 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single pushfit coupler : 75 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 coupler 7194 Cost of coupler each 1.00 50.00 7190 Seal rings nos 2.00 16.00 9999 Adhesive, and sundries etc. L.S. 2.73 1.49 9999 Carriage and fixing charges L.S. 9.36 1.49 Total: Add water charges @ 1% on 100.02

DSR-12

Page 483 of 2298

Add C.P & OH @15% on 101.02 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 116.17 Rs 116.15

Item Code: 12.42.2.2 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single pushfit coupler : 110 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 coupler 7195 Cost of coupler each 1.00 81.00 7191 Seal rings nos 2.00 20.00 9999 Adhesive, and sundries etc. L.S. 2.73 1.49 9999 Carriage and fixing charges L.S. 10.79 1.49 Total: Add water charges @ 1% on 141.15 Add C.P & OH @15% on 142.56 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 163.94 Rs 163.95

Item Code: 12.42.3.1 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single tee with door: 75 x 75 x 75 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 7198 75x75x75 mm single equal tee (with door) including cost of each 1.00 115.00 bolts and nuts 7190 Seal rings nos 3.00 16.00 9999 Adhesive, Carriage of material rubber washer etc. including L.S. 10.76 1.49 fixing charges Total: Add water charges @ 1% on 179.03 Add C.P & OH @15% on 180.82 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 207.94 Rs 207.95

Item Code: 12.42.3.2 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single tee with door: 110 x 110 x 110 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 7199 110x110x110 mm single equal tee (with door) including cost each 1.00 180.00 of bolts and nuts 7191 Seal rings nos 3.00 20.00 9999 Adhesive, Carriage of material rubber washer etc. including L.S. 13.47 1.49 fixing charges

DSR-12

Page 484 of 2298

Add water charges @ 1% on

Total: 260.07

Add C.P & OH @15% on 262.67 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 302.07 Rs 302.05

Item Code: 12.42.4.1 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single tee without door : 75 x 75 x 75 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 7196 75x75x75 mm single equal tee (without door) including cost each 1.00 95.00 of bolts and nuts 7190 Seal rings nos 3.00 16.00 9999 Adhesive, Carriage of material rubber washer etc. including L.S. 10.76 1.49 fixing charges Total: Add water charges @ 1% on 159.03 Add C.P & OH @15% on 160.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 184.71 Rs 184.70

Item Code: 12.42.4.2 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single tee without door : 110 x 110 x 110 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 7197 110x110x110 mm single equal tee (without door) including each 1.00 128.00 cost of bolts and nuts 7191 Seal rings nos 3.00 20.00 9999 Adhesive, Carriage of material rubber washer etc. including L.S. 13.47 1.49 fixing charges Total: Add water charges @ 1% on 208.07 Add C.P & OH @15% on 210.15 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 241.67 Rs 241.65

Item Code: 12.42.5.1 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Bend 87.5 degree: 75 mm bend. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate 7208 Cost of bend each 1.00 56.00 7190 Seal rings nos 1.00 16.00 9999 Adhesive, and sundries etc. L.S. 2.73 1.49

DSR-12

Page 485 of 2298

9999

Carriage and fixing charges

L.S.

9.36

Add water charges @ 1% on

1.49 Total: 90.02

Add C.P & OH @15% on 90.92 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 104.56 Rs 104.55

Item Code: 12.42.5.2 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Bend 87.5 degree: 110 mm bend. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate 7209 Cost of bend each 1.00 95.00 7191 Seal rings nos 1.00 20.00 9999 Adhesive, and sundries etc. L.S. 2.73 1.49 9999 Carriage and fixing charges L.S. 10.79 1.49 Total: Add water charges @ 1% on 135.15 Add C.P & OH @15% on 136.50 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 156.98 Rs 156.95

Item Code: 12.42.6.1 P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Shoe plain : 75 mm dia.

Code 7212 7190 9999 9999

Description Details of cost for 1 shoe Cost of shoe Seal rings Adhesive, and sundries etc. Carriage and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each nos L.S. L.S.

1.00 1.00 2.73 9.36

Add water charges @ 1% on

Rate 107.00 16.00 1.49 1.49 Total: 141.02

Add C.P & OH @15% on 142.43 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 163.79 Rs 163.80

Item Code: 12.42.6.2 P/F UPVC moulded fittings/ accessories for UPVC rain water pipes- Shoe (Plain) 110 mm Details of Cost for : 1.00 No. Code Description Unit Quantity 7213 UPVC - Plain Shoe - 110mm each 1.00 7191 Seal ring for 110mm dia pipe nos 1.00 9999 Adhesive, and sundries etc. L.S. 2.73 9999 Carriage and fixing charges L.S. 10.79

DSR-12

Rate 207.00 20.00 1.49 1.49

Page 486 of 2298

Add water charges @ 1% on

Total: 247.15

Add C.P & OH @15% on 249.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 287.06 Rs 287.05

Item Code: 12.43.1 P/F unplasticised P.V.C pipes clips design to unplasticised P.V.C rain water pipes and fixing in C.M 1 : 4 coarse sand : For 75 mm dia. pipes . Details of Cost for : 5.00 Nos Code Description Unit Quantity Rate MATERIALS 7214 U-PVC pipe clips each 5.00 16.00 9999 Carriage of U-PVC pipe clips L.S. 2.47 1.49 0870 Hardwood plug 50x50x50 each 10.00 8.00 LABOUR :0116 Fitter Day 0.125 301.00 0124 Mason 2nd class Day 0.75 273.00 0114 Beldar Day 0.50 247.00 9999 Sundries L.S. 7.15 1.49 9999 Sundries L.S. 0.91 1.49 9999 Sundries cement mortar 1:4(1 Cement: 4 L.S. 3.90 1.49 Coarse sand) Total: Add water charges @ 1% on 547.38 Add C.P & OH @15% on 552.85 Cost for 5.00 Nos Rate per Each: Rate as per DSR-12:

Rs 127.16 Rs 127.15

Item Code: 12.43.2 P/F UPVC pipe clips to UPVC rain water pipes : 110 mm Code 7215 9999 0870 0116 0124 0114 9999 9999 9999

Details of Cost for : 5.00 Nos Unit Quantity

Description MATERIALS UPVC pipe clip 110 mm bend Carriage of U-PVC pipe clips Hardwood plug 50x50x50 LABOUR :Fitter Mason 2nd class Beldar Sundries Sundries Sundries cement mortar 1:4(1 Cement: 4 Coarse sand)

Rate

each L.S. each

5.00 2.47 10.00

31.00 1.49 8.00

Day Day Day L.S. L.S. L.S.

0.125 0.75 0.50 7.15 0.91 3.90

301.00 273.00 247.00 1.49 1.49 1.49 Total: 622.38

Add water charges @ 1% on

Add C.P & OH @15% on 628.60 Cost for 5.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 144.58 Rs 144.60

Page 487 of 2298

Item Code: 12.44 P/F to the inlet mouth of rain water pipe cast iron grating 15 cm diametre. Code

7187 9999

Description Details of cost for 1 grating MATERIALS 150 mm cast iron grating for rain water pipe Carriage of material and fixing charges

Details of Cost for : 1.00 No. Unit Quantity

each L.S.

1.00 4.16

Add water charges @ 1% on

Rate

22.00 1.49 Total: 28.20

Add C.P & OH @15% on 28.48 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 32.75 Rs 32.75

Item Code: 12.45.1 P/F at all height false ceil- ing of i/c P/F of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating 600 asper IS:277: 12.5 mm thick tapered edge gypsum board conforming to IS: 2095, Part-I.

Code

7009 7010 7011 7012 7013 7014 1022 7015 7020 7016 7017 7018 7021 7388 9999 9999 0112 0114 0131

Details of Cost for : 103.68 Sqm Description Unit Quantity Details of cost for 10.8x9.6m = 103.68sqm. MATERIALS Gypsum board 12.5mm thick = 103.68 sqm.+ Add wastage @ 5% = 5.18sqm. = 108.86 sqm. Gypsum board sqm 108.86 Ceiling sections metre 238.14 Perimetre channel metre 41.84 Intermediate channel metre 90.72 Strap hanger (Ceiling angle) metre 10.80 Connecting clips each 189.00 Nuts and bolts 6 mm dia (25mm) 10 No 216.00 Soffit cleat each 72.00 Drive all screws 25 mm long 100 N 1000.00 Joint filler kilog 22.81 Joint finisher kilog 34.21 Joint tape roll 1.27 Primer for two coats litre 18.66 Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each 72.00 bolt Sundries like rawl plug scaffolding etc L.S. 807.30 Carriage of material etc. L.S. 447.20 LABOUR :Carpenter 2nd class Day 31.104 Beldar Day 31.104 Painter Day 10.368 Add water charges @ 1% on

Rate

160.00 39.00 27.00 42.00 19.00 6.20 20.00 4.00 56.00 22.00 24.00 140.00 85.00 48.00 1.49 1.49 273.00 247.00 273.00 Total: 61718.49

Add C.P & OH @15% on 62335.67 Cost for 103.68 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 691.42 Rs 691.40

Page 488 of 2298

Item Code: 12.45.2 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets - 12.5 mm thick tapered edge gypsum plain board

Code

7030 7010 7011 7012 7013 7014 1022 7015 7020 7016 7017 7018 7021 7388 9999 9999 0112 0114 0131

Details of Cost for : 103.68 Sqm Unit Quantity

Description

MATERIALS: Gypsum board 12.5 mm thick = 103.68 sqm + Wastage @ 5% = 5.18 sqm Total = 108.86 sqm 12.5 mm thick tapered edge gypsum fire resistant board Sqm Galvanised Steel celling section (size 80x26x0.50 mm) metre Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) metre Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm) Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm) Galvanised Steel connecting clips (2.64 mm dia and 230 mm long GI wire Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm) All drive screws ( for gypsum board) Joint filler Joint finisher Joint tape roll Primer ( for gypsum board) Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt Sundries like rawl plug, scaffolding etc Carriage of material LABOUR: Carpenter 2nd class Beldar Painter

Rate

108.86 238.14 41.84

237.00 39.00 27.00

metre

90.72

42.00

metre

10.80

19.00

each

189.00

6.20

10 No

216.00

20.00

each 100 N kilog kilog roll litre each

72.00 1000.00 22.81 34.21 1.27 18.66 72.00

4.00 56.00 22.00 24.00 140.00 85.00 48.00

L.S. L.S.

807.30 447.20

1.49 1.49

Day Day Day

31.104 31.104 10.37

273.00 247.00 273.00 Total: 70101.26

Add water charges @ 1% on

Add C.P & OH @15% on 70802.27 Cost for 103.68 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 785.33 Rs 785.30

Item Code: 12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets - 12.5 mm thick tapered edge gypsum moisture resistant board

Code

7031

DSR-12

Description

Details of Cost for : 103.68 Sqm Unit Quantity

MATERIALS: Gypsum board 12.5 mm thick = 103.68 sqm + Wastage @ 5% = 5.18 sqm Total = 108.86 sqm 12.5 mm thick tapered edge gypsum moisture resistant board Sqm

108.86

Rate

271.00

Page 489 of 2298

7010 7011

Galvanised Steel celling section (size 80x26x0.50 mm) metre Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) metre

7012

Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm) Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm) Galvanised Steel connecting clips (2.64 mm dia and 230 mm long GI wire Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm) All drive screws ( for gypsum board) Joint filler Joint finisher Joint tape roll Primer ( for gypsum board) Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt Sundries like rawl plug, scaffolding etc Carriage of material LABOUR: Carpenter 2nd class Beldar Painter

7013 7014 1022 7015 7020 7016 7017 7018 7021 7388 9999 9999 0112 0114 0131

238.14 41.84

39.00 27.00

metre

90.72

42.00

metre

10.80

19.00

each

189.00

6.20

10 No

216.00

20.00

each 100 N kilog kilog roll litre each

72.00 1000.00 22.81 34.21 1.27 18.66 72.00

4.00 56.00 22.00 24.00 140.00 85.00 48.00

L.S. L.S.

807.30 447.20

1.49 1.49

Day Day Day

31.104 31.104 10.368

273.00 247.00 273.00 Total: 73801.95

Add water charges @ 1% on

Add C.P & OH @15% on 74539.97 Cost for 103.68 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 826.78 Rs 826.80

Item Code: 12.45.4 P/F false ceiling including p/f of frame work made of special sections, power pressed from M.S. sheets - Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area

Code

7028 7010 7011 7012 7013 7014 1022 7015 7020 7016

DSR-12

Description

Details of Cost for : 103.68 Sqm Unit Quantity

MATERIALS: Gypsum board 12.5 mm thick = 103.68 sqm + Wastage @ 5% = 5.18 sqm Total = 108.86 sqm 12.5 mm thick Fully Perforated gypsum board Sqm Galvanised Steel celling section (size 80x26x0.50 mm) metre Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) metre Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm) Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm) Galvanised Steel connecting clips (2.64 mm dia and 230 mm long GI wire Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm) All drive screws ( for gypsum board) Joint filler

Rate

108.86 238.14 41.84

927.00 39.00 27.00

metre

90.72

42.00

metre

10.80

19.00

each

189.00

6.20

10 No

216.00

20.00

each 100 N kilog

72.00 1000.00 22.81

4.00 56.00 22.00

Page 490 of 2298

7017 7018 7021 7388 9999 9999 0112 0114 0131

Joint finisher kilog Joint tape roll roll Primer ( for gypsum board) litre Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each bolt Sundries like rawl plug, scaffolding etc L.S. Carriage of material L.S. LABOUR: Carpenter 2nd class Day Beldar Day Painter Day

34.21 1.27 18.66 72.00

24.00 140.00 85.00 48.00

807.30 447.20

1.49 1.49

31.104 31.104 10.368

273.00 247.00 273.00 Total: 145214.11

Add water charges @ 1% on

Add C.P & OH @15% on 146666.25 Cost for 103.68 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1626.80 Rs 1626.80

Item Code: 12.46 P/F to inlet mout of rain water pipe PTMT grating square (Silt) 150 mm Sqm with a height of 8 mm and weighing not less than 100 Grams(Prayagorequivalent). Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 grating MATERIALS 7857 P.T.M.T. Grating square slit 150mm each 1.00 77.00 9999 Carriage of material and fixing charges L.S. 4.16 1.49 Total: Add water charges @ 1% on 83.20 Add C.P & OH @15% on 84.03 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 96.63 Rs 96.65

Item Code: 12.47.1 P/F UV stabilised fiber glass reinforced plastic sheet roofing upto any pitch i/c fixing J or L hooks, bolts & nuts 8 mm dia.: 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2"or3"or 6") as specified.

Code

8668 9999

1022

DSR-12

Details of Cost for : 184.518 Sqm Description Unit Quantity Rate Details of cost for area of roof. 2x18.09x5.1 = 184.518 sqm. MATERIALS: UV stabilised 2 mm thick corrugated FRP sheet. sqm 240.408 538.00 Carriage of sheet L.S. 104.00 1.49 G.I.Seam bolts and nuts 60cm centre to centre zig-zag i.e. 30cm centre to centre straight Breadth is 5.1 metre No. of bolts in one lap 5.1/0.3 =17 nos. 2x26(laps)xl7 nos. = 884 nos. Bolts and nuts 10 No 884.00 20.00 G.I.,J or L hooks 8mm dia. (No. of purlins to be used 5 on either side)2x5x27 (No. of sheets)x23 nos. of bolts

Page 491 of 2298

1023 1207 1208 9999 9999 0130 0112 0114

in each sheet = 810 nos. G.I., J or L hooks Limpet washers (total of seam and J bolts) 884+810= 1694 Bitumen washers Carriage of bolts and washers Sundries LABOUR: Mistry Carpenter 2nd class Beldar

10 No 100 N

810.00 1694.00

90.00 35.00

100 N L.S. L.S.

1694.00 26.91 53.82

25.00 1.49 1.49

1.30 15.50 15.50

301.00 273.00 247.00 Total: 148140.45

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 149621.85 Cost for 184.518 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 932.51 Rs 932.50

Item Code: 12.47.2 P/F UV stabilised fiber glass reinforced plastic sheet roofing upto any pitch i/c fixing J or L hooks, bolts & nuts 8 mm dia.: 2 mm thick flat. Details of Cost for : 184.518 Sqm Code Description Unit Quantity Rate Details of cost for area of roof. 2x18.09x5.1 = 184.518 sqm.

8667 9999

1022

1023 1207 1208 9999 9999 0130 0112 0114

MATERIALS: UV stabilised 2 mm thick plain FRP sheet sqm Carriage of sheet L.S. G.I.Seam bolts and nuts 60cm centre to centre zig-zag i.e. 30cm centre to centre straight Breadth is 5.1 metre No. of bolts in one lap 5.1/0.3 =17 nos. 2x26(laps)xl7 nos. = 884 nos. Bolts and nuts 10 No G.I.,J or L hooks 8mm dia. (No. of purlins to be used 5 on either side)2x5x27 (No. of sheets)x23 nos. of bolts in each sheet = 810 nos. G.I., J or L hooks 10 No Limpet washers (total of seam and J bolts) 100 N 884+810= 1694 Bitumen washers 100 N Carriage of bolts and washers L.S. Sundries L.S. LABOUR: Mistry Day Carpenter 2nd class Day Beldar Day

240.408 104.00

465.00 1.49

884.00

20.00

810.00 1694.00

90.00 35.00

1694.00 26.91 53.82

25.00 1.49 1.49

1.30 15.50 15.50

301.00 273.00 247.00 Total: 130590.67

Add water charges @ 1% on

Add C.P & OH @15% on 131896.58 Cost for 184.518 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 822.04 Rs 822.05

Page 492 of 2298

Item Code: 12.48 P/F pressed clay tile (Mangalore tile) 20 mm thick, approved pattern ceiling on steel frame. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 8670 Manglore tiles 20 mm thick. each 160.00 2207 Carriage of tiles 1000 160.00 LABOUR 0123 Mason 1st class Day 0.30 0114 Beldar Day 1.56 9999 Sundries L.S. 13.00 Add water charges @ 1% on

Rate 10.20 140.16 301.00 247.00 1.49 Total: 2149.42

Add C.P & OH @15% on 2170.91 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 249.66 Rs 249.65

Item Code: 12.49 P/L pressed clay tile ridge (Mangalore tile) 20mm thick of approved pattern ceiling over steel frame. Details of Cost for : 3.60 m Code Description Unit Quantity MATERIALS: 8669 Mangalore ridge tiles 20mm thick. each 12.00 2207 Carraige of tiles 1000 12.00 LABOUR : 0123 Mason (brick layer) 1st class Day 0.01 0114 Beldar Day 0.15 9999 Sundries L.S. 2.60 Add water charges @ 1% on

Rate 29.00 140.16 301.00 247.00 1.49 Total: 393.61

Add C.P & OH @15% on 397.55 Cost for 3.60 m Rate per One Metre: Rate as per DSR-12:

Rs 126.99 Rs 127.00

Item Code: 12.50 P/F precoated GI profile sheets 0.50 mm total coated thickness (TCT), in roofing .. Details of Cost for : 216.14 Sqm Code Description Unit Quantity MATERIALS: Sheets used =20nos 20xl0.70mxl.06m=226.84sqm Add 3% wastage = 6.81 = 233.65sqm.

DSR-12

8671 9999 1023 1208 1209 9999

Precoated galvanised iron prifile sheet 0.50 mm TCT Carriage of sheets G.I J or L hooks 8mm dia with nuts and bolts GI washers Bitumen washers Carriage of bolts and nuts, washers etc.

9999

Sundries

sqm L.S. 10 No 100 N 100 N L.S. L.S.

Rate

233.65 104.00 476.00 476.00 476.00

435.00 1.49 90.00 25.00 32.00

8.06 39.52

1.49 1.49

Page 493 of 2298

0130 0112 0114

Mistry LABOUR: Carpenter II class Beldar

Day

2.34

301.00

Day Day

9.34 9.34

273.00 247.00 Total: 111980.06

Add water charges @ 1% on

Add C.P & OH @15% on 113099.86 Cost for 216.14 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 601.76 Rs 601.75

Item Code: 12.51.1 P/F precoated galvanised steel sheet roofing acce- ssories: Ridges plain (500-600 mm). Details of Cost for : 20.20 m Code Description Unit Quantity MATERIAL:One piece plain ridges Consider a shed of 20x10m (external dimensions at plinth).

8672 9999 9999 0130 0112 0114

Length of ridges 20.2 metre + 5% wastage = 23.11 metre. MATERIALS: Precoated galvanised steel plain ridges. metre Carriage (The ridge is to be fixed with the same hooks as the L.S. Sheets) Sundries L.S. LABOUR: Mistry Day Carpenter 2nd class Day Beldar Day

Rate

23.11 13.52

440.00 1.49

6.76

1.49

0.14 0.55 1.64

301.00 273.00 247.00 Total: 10795.98

Add water charges @ 1% on

Add C.P & OH @15% on 10903.94 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

Rs 620.77 Rs 620.75

Item Code: 12.51.2 P/F precoated galvanised steel sheet roofing acce- ssories: Flashing/Aprons (upto600mm). Details of Cost for : 20.20 m Code Description Unit Quantity Details for shed of 20.2 metres completed length MATERIALS: 8673 Precoated galvanised steel flashings/aprons. = 20.20 + 5% metre 23.11 wastage = 23.11 metre 9999 Carriage of appron pieces. (The appron pieces are to be fixed L.S. 3.25 with the same hooks as the s 9999 Sundries L.S. 3.25 LABOUR: 0130 Mistry Day 0.07 0112 Carpenter 2nd class Day 0.28 0114 Beldar Day 0.82 Add water charges @ 1% on

DSR-12

Rate

440.00 1.49 1.49 301.00 273.00 247.00 Total: 10478.13

Page 494 of 2298

Add C.P & OH @15% on 10582.91 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

Rs 602.49 Rs 602.50

Item Code: 12.51.3 P/F precoated GS sheet roofing accessories 0.50 mm total coated thickness (TCT)... ..complete : North light curves.

Code 8675 1023 1209 1208 9999 9999 0130 0112 0114

Description MATERIALS: Precoated galvanised steel north light curves (Qty : 20.20 + 5% wastage = 23.11 mtr) G.I J or L hooks 8mm dia with nuts and bolts Bitumen washers GI washers Carriage of hooks, nuts, washers and curves Sundries Mistry LABOUR: Carpenter II class Beldar

Details of Cost for : 20.20 m Unit Quantity

Rate

metre

23.11

455.00

10 No 100 N 100 N L.S. L.S. Day

40.00 40.00 40.00 9.88 6.24 0.10

90.00 32.00 25.00 1.49 1.49 301.00

0.30 1.00

273.00 247.00 Total: 11280.87

Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 11393.68 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

Rs 648.65 Rs 648.65

Item Code: 12.51.4 P/F precoated galvanised steel sheet roofing acce- ssories: Barge board (upto 300 mm). Details of Cost for : 8.23 m Code Description Unit Quantity Completed length of barge boards = 8.23 + 5% wastage = 8.64 metre MATERIALS: 8676 Precoated galvanised steel barge board. metre 8.64 0222 Seam bolts and nuts 6 mm dia and 25 mm long 10 No 5.00 1211 G.I. plain washers for seam bolts. 100 N 10.00 1208 Bitumen washers 100 N 5.00 9999 Carriage of barge boards, bolts, nuts and washers L.S. 9.36 9999 Sundries L.S. 6.76 LABOUR: 0130 Mistry Day 0.04 0112 Carpenter 2nd class Day 0.06 0114 Beldar Day 0.40 Add water charges @ 1% on

Rate

445.00 35.00 32.00 25.00 1.49 1.49 301.00 273.00 247.00 Total: 4017.99

Add C.P & OH @15% on 4058.17 Cost for 8.23 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 567.06 Rs 567.05

Page 495 of 2298

Item Code: 12.51.5 P/F precoated galvanised steel sheet roofing acce- ssories: Crimp curve. Code

8677 1023 1209 1208 9999 9999 0130 0112 0114

Details of Cost for : 21.412 Sqm Unit Quantity

Description Details of crimp curve 20.2 metres long Area 20.20 x 1.06 =21.412 sqm MATERIALS: Precoated galvanised steel crimp curve G.I. J or L hooks with nuts and bolts 8 mm dia G.I plain washer thick Bitumen washers Carriage of hooks, nuts, washers and curves Sundries LABOUR: Mistry Carpenter 2nd class Beldar

sqm 10 No 100 N 100 N L.S. L.S. Day Day Day

Rate

22.483 40.00 40.00 40.00 9.88 6.24

475.00 90.00 32.00 25.00 1.49 1.49

0.10 0.30 1.00

301.00 273.00 247.00 Total: 11445.25

Add water charges @ 1% on

Add C.P & OH @15% on 11559.70 Cost for 21.412 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 620.85 Rs 620.85

Item Code: 12.51.6 P/F precoated galvanised steel sheet roofing acce- ssories: Gutter (600mm overall grith). Details of Cost for : 10.00 m Code Description Unit Quantity MATRIAL 0.63mm thick with zinc coating not less than 275gm/sqm

8674 9999 1008 1022 1024 1210 1208 9999 9999 0102 0114 9999 0130 0102 0112 0114

DSR-12

Consider a length of 10.00m Sheet used = 10x1.06m x 0.60 = 6.36 sqm. = 6.36 metre Precoated galvanised steel gutter Carriage of gutter Flats upto 10 mm in thickness Galvanised steel bolts and nuts 6 mm dia and 25 mm long round head with slot Galvanised steel bolts and nuts 10 mm dia and 125 mm long G.I. plain washers thin Bitumen washers Carriage of G.I. seam bolts and Sundries LABOUR: Blacksmith 1st class Beldar Sundries Mistry Blacksmith first class Carpenter 2nd class Beldar

Rate

metre L.S. quint 10 No

10.00 1.04 0.0749 20.00

455.00 1.49 4200.00 20.00

each

30.00

10.00

100 N 100 N L.S. L.S.

70.00 40.00 2.73 5.33

30.00 25.00 1.49 1.49

Day Day L.S. Day Day Day Day

0.50 0.50 12.61 0.28 0.84 0.62 1.68

Add water charges @ 1% on

301.00 247.00 1.49 301.00 301.00 273.00 247.00 Total: 6463.27

Add C.P & OH @15% on

6527.90

Page 496 of 2298

Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 750.71 Rs 750.70

Item Code: 12.52.1 P/L tiled false ceiling of size 595x595 mm metal grid of hot dipped galvanized steel sections.. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm,

Code

Details of Cost for : 100.00 Sqm Unit Quantity

Description

Rate

MATERIALS: Ceiling Area =100 Sqm Add wastage @ 5% =0.05 Sqm Total 100.05 Sqm 8599

Sqm

100.05

809.00

8611 8612 8613

G.I Metal Tile Lay-in plain Tegular edge global white color tiles of size 595x595mm and 0. Main T ceiling sections 24x38x0.3 mm (3 metre long) Perimeter wall angle 21x21x0.3 mm (3 metre long) Intermediate cross T-Section 24x25x0.30mm (1.2 mtrs long)

each each each

29.50 13.50 147.00

187.00 118.00 72.00

8614

Intermediate cross T-Section 24x25x0.30mm (0.6 mtrs long)

each

147.00

34.00

8615 8616 8617 7388

Hanger rod 4 mm thick each Adjustment clip each Soffit cleat each Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each bolt Sundries i.e scaffolding etc., L.S. Carriage of materials L.S. LABOUR: Carpenter 1st class Day Beldar Day

72.00 72.00 72.00 72.00

7.00 6.00 3.00 48.00

187.95 89.28

1.49 1.49

28.00 23.00

301.00 247.00 Total: 122762.03

9999 9999 0111 0114

Add water charges @ 1% on

Add C.P & OH @15% on 123989.65 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1425.88 Rs 1425.90

Item Code: 12.52.2 P/L tiled false ceiling of size 595x595 mm metal grid of hot dipped galvanized steel sections.. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm with 20% area perforations

Code

Description

Details of Cost for : 100.00 Sqm Unit Quantity

Rate

MATERIALS: Ceiling Area =100 Sqm Add wastage @ 5% =0.05 Sqm Total 100.05 Sqm 8600 8611 8612

DSR-12

GI Metal Tile Lay-in Perforated Tegular edge global white Sqm color tiles of Size 595x595 mm a Main T ceiling sections 24x38x0.3 mm (3 metre long) each Perimeter wall angle 21x21x0.3 mm (3 metre long) each

100.05

906.00

29.50 13.50

187.00 118.00

Page 497 of 2298

8613

Intermediate cross T-Section 24x25x0.30mm (1.2 mtrs long)

each

147.00

72.00

8614

Intermediate cross T-Section 24x25x0.30mm (0.6 mtrs long)

each

147.00

34.00

8615 8616 8617 7388

Hanger rod 4 mm thick each Adjustment clip each Soffit cleat each Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each bolt Sundries i.e scaffolding etc., L.S. Carriage of materials L.S. LABOUR: Carpenter 1st class Day Beldar Day

72.00 72.00 72.00 72.00

7.00 6.00 3.00 48.00

187.95 89.28

1.49 1.49

28.00 23.00

301.00 247.00 Total: 132466.88

9999 9999 0111 0114

Add water charges @ 1% on

Add C.P & OH @15% on 133791.55 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1538.60 Rs 1538.60

Item Code: 12.52.3 P/F tiled false ceiling of size 595x595 mm metal grid of hot dipped galvanized steel sections.. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard..

Code

Details of Cost for : 100.00 Sqm Unit Quantity

Description

Rate

MATERIALS: Ceiling Area = 100 sqm Add wastage @ 5% = 5 sqm Total = 105.00 Sqm 8601

Sqm

105.00

468.00

each

29.50

187.00

8613

PVC Laminated Gypsum Tiles (Square edge) of Size 595x595 mm and 12.5 mm thick Main T ceiling sections 24x38x0.3 mm (3 metre long) (including 10% wastage) Perimeter wall angle 21x21 mm (3 metre long) (including 10% wastage) Intermediate cross T-Section 24x25x0.3 mm (1.2 mtr long)

each each

13.50 147.00

118.00 72.00

8614

Intermediate cross T-Section 24x25x0.3 mm (0.6 mtr. long)

each

147.00

34.00

8615 8616 8617 7388

Hanger rod 4 mm thick each Adjustment clip 85x30x0.8 mm each Soffit cleat (Size 27x37x25x1.60 mm) each Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each bolt Sundries i.e scaffoldings etc., L.S. Carriage of material L.S. LABOUR: Carpenter 1st class Day Beldar Day

72.00 72.00 72.00 72.00

7.00 6.00 3.00 48.00

187.95 89.28

1.49 1.49

28.00 23.00

301.00 247.00 Total: 90961.58

8611 8612

9999 9999 0111 0114

Add water charges @ 1% on

Add C.P & OH @15% on 91871.20 Cost for 100.00 Sqm

DSR-12

Page 498 of 2298

Rate per One Sqm: Rate as per DSR-12: In DAR qty of 8601 wrongly taken as 100.05 instead of 105

Rs 1056.52 Rs 1029.60

Item Code: 12.52.4 P/F tiled false ceiling of size 595x595 mm metal grid of hot dipped galvanized steel sections.. 12.5 mm Gypsum Board tile Details of Cost for : 100.00 Sqm Code Description Unit Quantity MATERIALS: Ceiling Area = 100 sqm Add wastage @ 5% = 5 sqm Total = 105.00 Sqm (In DAR wrongly taken as 100.05) 8602 Gypsum Tiles Fully Perforated Square edge of Size 595x595 Sqm 105.00 mm and 12.5mm thick 8611 Main T ceiling sections 24x38x0.3 mm (3 metre long) (including 10% wastage) each 29.50 8612 Perimeter wall angle 21x21 mm (3 metre long) (including 10% wastage) each 13.50 8613 Intermediate cross T-Section 24x25x0.3 mm (1.2 mtr long) each 147.00

thick fully Perforated

Rate

484.00

187.00 118.00 72.00

8614

Intermediate cross T-Section 24x25x0.3 mm (0.6 mtr. long)

each

147.00

34.00

8615 8616 8617 7388

Hanger rod 4 mm thick each Adjustment clip 85x30x0.8 mm each Soffit cleat (Size 27x37x25x1.60 mm) each Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each bolt Sundries i.e scaffoldings etc., L.S. Carriage of material L.S. LABOUR: Carpenter 1st class Day Beldar Day

72.00 72.00 72.00 72.00

7.00 6.00 3.00 48.00

187.95 89.28

1.49 1.49

28.00 23.00

301.00 247.00 Total: 92641.58

9999 9999 0111 0114

Add water charges @ 1% on

Add C.P & OH @15% on 93568.00 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1076.03 Rs 1048.20

Item Code: 12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles ..

Code

Description

Details of Cost for : 100.00 Sqm Unit Quantity

Rate

MATERIALS: Ceiling Area = 100 sqm Add wastage @ 5% = 5 sqm Total = 105.00 Sqm 8589 8590

DSR-12

Calcium Silicate tegular edged celling tiles 595x595 mm and Sqm 15 mm thick Galvanised Steel main Tee ceiling section Size 24 x 38 x 0.33 Nos mm (3 metre long)

105.00

858.00

29.50

192.00

Page 499 of 2298

8591 8592 8593 8615 8616 7388 8617 8595 9999 9999 9999 0111 0114

Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 metre long) Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33 mm (1.2 metre long) Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33 mm ( 0.6 metre long) Hanger rod 4 mm thick Adjustment clip 85x30x0.8 mm Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt Soffit cleat (Size 27x37x25x1.60 mm) Wooden screws with plastic rawl plugs 35x8 mm Sundries i.e scaffoldings etc., Carriage of material Sundries LABOUR: Carpenter 1st class Beldar

Nos

13.50

125.00

Nos

147.00

77.00

Nos

147.00

39.00

each each each

72.00 72.00 72.00

7.00 6.00 48.00

each Nos L.S. L.S. L.S.

72.00 100.00 498.65 237.48 310.70

3.00 0.55 1.49 1.49 1.49

Day Day

28.00 23.00

301.00 247.00 Total: 134825.28

Add water charges @ 1% on

Add C.P & OH @15% on 136173.53 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1566.00 Rs 1566.00

Item Code: 12.54.1 P/FGI Clip in Metal Ceiling System of 600x600mm module - including 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel ..GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600mm..

Code

Description

Details of Cost for : 100.00 Sqm Unit Quantity

Rate

MATERIALS: Ceiling Area = 100 sqm Add wastage @ 5% = 5 sqm Total = 105.00 Sqm 8597 8604 8605 8606 8607 8608 8609 8610 8615 8616 8617 7388 9999 9999 0111 0114

DSR-12

GI Metal Tile Clip in Plain Beveled edge global white colour Sqm tiles of size 600x600 mm and Spring T-section 24x34x0.45 mm (3.00 meter long) m C Wall angle section 20x30x20x0.50 mm (3.00 meter long) m

105.00

894.00

60.00 27.70

180.00 155.00

Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long) m Spring T-connector Nos. C Carrier Connector Nos. C Suspension Clip Nos. Wire Coupling Clip Nos. Hanger rod 4 mm thick each Adjustment clip 85x30x0.8 mm each Soffit cleat (Size 27x37x25x1.60 mm) each Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each bolt Sundries i.e scaffoldings etc., L.S. Carriage of material L.S. LABOUR: Carpenter 1st class Day Beldar Day

33.00 44.00 44.00 88.00 333.00 80.00 80.00 80.00 80.00

164.00 5.00 11.00 11.00 9.00 7.00 6.00 3.00 48.00

188.00 90.00

1.49 1.49

28.00 23.00

301.00 247.00 Total:

Page 500 of 2298

Add water charges @ 1% on

138687.72

Add C.P & OH @15% on 140074.60 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1610.86 Rs 1559.45

Item Code: 12.54.2 P/FGI Clip in Metal Ceiling System of 600x600mm module - including 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel ..GI Metal Ceiling Clip in plain Beveled edge global white color tiles 600x600 - 0.5 mm thick with 25 mm height..

Code

Description

Details of Cost for : 100.00 Sqm Unit Quantity

Rate

MATERIALS: Ceiling Area = 100 sqm Add wastage @ 5% = 5 sqm Total = 105.00 Sqm 8598 8604 8605 8606 8607 8608 8609 8610 8615 8616 8617 7388 9999 9999 0111 0114

GI Metal Tile Clip in Perforated Beveled edge global white Sqm colour tiles of size 600x600 mm Spring T-section 24x34x0.45 mm (3.00 meter long) m C Wall angle section 20x30x20x0.50 mm (3.00 meter long) m

105.00

998.00

60.00 27.70

180.00 155.00

Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long) m Spring T-connector Nos. C Carrier Connector Nos. C Suspension Clip Nos. Wire Coupling Clip Nos. Hanger rod 4 mm thick each Adjustment clip 85x30x0.8 mm each Soffit cleat (Size 27x37x25x1.60 mm) each Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each bolt Sundries i.e scaffoldings etc., L.S. Carriage of material L.S. LABOUR: Carpenter 1st class Day Beldar Day

33.00 44.00 44.00 88.00 333.00 80.00 80.00 80.00 80.00

164.00 5.00 11.00 11.00 9.00 7.00 6.00 3.00 48.00

188.00 90.00

1.49 1.49

28.00 23.00

301.00 247.00 Total: 149607.72

Add water charges @ 1% on

Add C.P & OH @15% on 151103.80 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1737.69 Rs 1680.30

Item Code: 12.55 P/F Heat Resistant Terrace Tiles (300 mm x 300mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: Qty of tiles = 10.00 sqm Add 3% for wastage = 0.3 sqm Total = 10.30 sqm

DSR-12

Page 501 of 2298

1204 03.009 0367 0368 2209 0875

0124 0115 0139 0101 0013 9999

Precast heat resistant terrace tiles (size 300x300 mm) and 20 mm thick Cement mortar 1:4 (1 cement : 4 coarse sand). Portland Cement White Cement Carraige of Cement Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment LABOUR: Mason (brick layer) 2nd class Coolie Skilled Beldar (for floor rubbing etc.) Bhisti Machine for rubbing of floors Sundries including carborandom stone etc.,

Sqm

10.30

482.00

Cum tonne tonne tonne kilog

0.224 0.044 0.044 0.088 3.08

3485.41 5000.00 12000.00 77.87 70.00

1.60 2.00 1.00 1.00 1.60 169.98

273.00 247.00 260.00 260.00 300.00 1.49 Total: 8899.85

Day Day Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 8988.85 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1033.72 Rs 1033.70

Item Code: 12.56 P/L roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III ,.. Details of Cost for : 1.00 Sqm Code Description Unit Quantity Rate MATERIALS: 7050 PU Primer Sqm 1.00 40.75 Area of PU spray = 1.00 sqm+ Wastage @ 10% = 0.10 sqm Toatl = 10.10 sqm

7051 7052 9999 9999 7053 9999 9999 9999 9999 9999 9999

40 mm (average) PU spray having 40-45 kg/cum density GI wire netting 3/4" x 24 G Sundries Polymerized mastic for all joints 400 G polythene sheet Wearing Course i.e 40mm Cement concrete Cement Graded stone Sand Carriage of material LABOUR: For PU spray For cement screed with Polythene sheet

Sqm Sqm L.S. L.S. Sqm

1.10 1.00 6.71 20.13 1.00

419.40 26.25 1.49 1.49 15.00

L.S. L.S. L.S. L.S.

44.67 13.75 21.48 16.78

1.49 1.49 1.49 1.49

L.S. L.S.

80.54 53.69

1.49 1.49 Total: 927.39

Add water charges @ 1% on

Add C.P & OH @15% on 936.66 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 1077.16 Rs 1077.15

Page 502 of 2298

Item Code: 12.57 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 .. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS: Qty for resin bonded glass wool : For 10.00sqm finished surface = 10.00 Add 10% wastage = 1.00 Total = 11.00sqm 7232 9999

0111 0114 9999

Resin Bonded Glass wool 24 kg/m³ 50 mm thick Sundries including GL wire 20 SWG and Virgin polythene bags 200 gm LABOUR: Carpenter 1st class Beldar Sundries (screws and washers)

Rate

sqm L.S.

11.00 52.00

204.00 1.49

Day Day L.S.

0.50 0.50 20.00

301.00 247.00 1.49 Total: 2625.28

Add water charges @ 1% on

Add C.P & OH @15% on 2651.53 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 304.93 Rs 304.95

Item Code: 13.1.1 12 mm cement plaster of mix in CM1:4 (1 cement: 4 fine sand) Code 03.004 0155 0115 0101 9999

Description MATERIALS : Cement mortar 1:4 (1 cement : 4 fine sand) LABOUR : Mason (average) Coolie Bhisthi Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.144

2971.81

Day Day Day L.S.

0.67 0.75 0.92 12.61

287.00 247.00 260.00 1.49 Total: 1063.47

Add water charges @ 1% on

Add C.P & OH @15% on 1074.10 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 123.52 Rs 123.50

Item Code: 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) Code 03.006 0155 0115 0101 9999

DSR-12

Description MATERIALS : Cement mortar 1:6 (1 cement : 6 fine sand) (Rate as per item no. 3.6) Mason (avge) Coolie Bhisthi Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.144

2311.69

Day Day Day L.S.

0.67 0.75 0.92 12.61

287.00 247.00 260.00 1.49 Total:

Page 503 of 2298

Add water charges @ 1% on

968.41

Add C.P & OH @15% on 978.09 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 112.48 Rs 112.50

Item Code: 13.2.1 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS : 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.172 (Rate as per item no. 3.4) LABOUR : 0155 Mason (avge) Day 0.80 0115 Coolie Day 0.88 0101 Bhisthi Day 0.99 9999 Scaffolding and sundries L.S. 12.61 Add water charges @ 1% on

Rate 2971.81

287.00 247.00 260.00 1.49 Total: 1234.30

Add C.P & OH @15% on 1246.64 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 143.36 Rs 143.35

Item Code: 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS : 03.006 Cement mortar 1:6 (1 cement : 6 fine sand) Cum 0.172 (Rate as per item no. 3.4) LABOUR : 0155 Mason (avge) Day 0.80 0115 Coolie Day 0.88 0101 Bhisthi Day 0.99 9999 Scaffolding and sundries L.S. 12.61 Add water charges @ 1% on

Rate 2311.69

287.00 247.00 260.00 1.49 Total: 1120.76

Add C.P & OH @15% on 1131.97 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 130.18 Rs 130.20

Item Code: 13.3.1 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) Code 03.004

DSR-12

Description MATERIALS : Cement mortar 1:4 (1 cement : 4 fine sand) (Rate as per item no. 3.4)

Details of Cost for : 10.00 Sqm Unit Quantity Cum

0.224

Rate 2971.81

Page 504 of 2298

0155 0115 0101 9999

LABOUR : Mason (avge) Coolie Bhisthi Scaffolding and sundries

Day Day Day L.S.

0.94 1.02 1.10 12.61

Add water charges @ 1% on

287.00 247.00 260.00 1.49 Total: 1492.20

Add C.P & OH @15% on 1507.12 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 173.32 Rs 173.30

Item Code: 13.3.2 20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) Code 03.006

0155 0115 0101 9999

Description MATERIALS : Cement mortar 1:6 (1 cement : 6 fine sand) (Rate as per item no. 3.4) LABOUR: Mason (avge) Coolie Bhisthi Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.224

2311.69

Day Day Day L.S.

0.94 1.02 1.10 12.61

287.00 247.00 260.00 1.49 Total: 1344.33

Add water charges @ 1% on

Add C.P & OH @15% on 1357.77 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 156.14 Rs 156.15

Item Code: 13.4.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) Code 03.009 0155 0115 0101 9999

Description MATERIALS : Cement mortar 1:4 (1 cement : 4 coarse sand). LABOUR : Mason (average) Coolie Bhisthi Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.144

3485.41

Day Day Day L.S.

0.67 0.75 0.92 12.61

287.00 247.00 260.00 1.49 Total: 1137.43

Add water charges @ 1% on

Add C.P & OH @15% on 1148.80 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 132.11 Rs 132.10

Item Code: 13.4.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

DSR-12

Page 505 of 2298

Code 03.011

0155 0115 0101 9999

Description MATERIALS : Cement mortar 1:6 (1 cement : 6 coarse sand). (Rate as per item no. 3.6) LABOUR : Mason (avge) Coolie Bhisthi Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.144

2825.29

Day Day Day L.S.

0.67 0.75 0.92 12.61

287.00 247.00 260.00 1.49 Total: 1042.37

Add water charges @ 1% on

Add C.P & OH @15% on 1052.79 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 121.07 Rs 121.05

Item Code: 13.5.1 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS : 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). Cum 0.172 (Rate as per item no. 3.9) LABOUR: 0155 Mason (avge) Day 0.80 0115 Coolie Day 0.88 0101 Bhisthi Day 0.99 9999 Scaffolding and sundries L.S. 12.61 Add water charges @ 1% on

Rate 3485.41

287.00 247.00 260.00 1.49 Total: 1322.64

Add C.P & OH @15% on 1335.87 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 153.63 Rs 153.60

Item Code: 13.5.2 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 03.011 Cement mortar 1:6 (1 cement : 6 coarse sand). 0.172 (Rate as per item no. 3.11) LABOUR 0155 Mason Day 0.80 0115 Coolie Day 0.88 0101 Bhisti Day 0.99 9999 Scaffolding and sundries L.S. 12.61 Add water charges @ 1% on

Rate 2825.29

287.00 247.00 260.00 1.49 Total: 1209.10

Add C.P & OH @15% on 1221.19 Cost for 10.00 Sqm

DSR-12

Page 506 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 140.44 Rs 140.45

Item Code: 13.6.1 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) Code 03.009

0155 0115 0101 9999

Description MATERIALS Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item no. 3.9) LABOUR Mason Coolie Bhisti Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.224

3485.41

Day Day Day L.S.

0.94 1.02 1.10 12.61

287.00 247.00 260.00 1.49 Total: 1607.24

Add water charges @ 1% on

Add C.P & OH @15% on 1623.31 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 186.68 Rs 186.70

Item Code: 13.6.2 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) Code 03.011

0155 0115 0101 9999

Description MATERIALS Cement mortar 1:6 (1 cement : 6 coarse sand). (Rate as per item no. 3.11) LABOUR Mason Coolie Bhisti Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.224

2825.29

Day Day Day L.S.

0.94 1.02 1.10 12.61

287.00 247.00 260.00 1.49 Total: 1459.37

Add water charges @ 1% on

Add C.P & OH @15% on 1473.96 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 169.51 Rs 169.50

Item Code: 13.7.1 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) Cum 0.144 (Rate as per item no. 3.3) LABOUR 0155 Mason Day 0.67 0115 Coolie Day 0.75 0101 Bhisti Day 0.92 9999 Scaffolding and sundries L.S. 12.61

DSR-12

Rate 3631.93

287.00 247.00 260.00 1.49

Page 507 of 2298

0367 2209 0155 0115 9999

Cement Carriage of Cement Mason Coolie Scaffolding and sundries

tonne tonne Day Day L.S.

0.02 0.02 0.27 0.27 8.06

Add water charges @ 1% on

5000.00 77.87 287.00 247.00 1.49 Total: 1416.28

Add C.P & OH @15% on 1430.44 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 164.50 Rs 164.50

Item Code: 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.144 (Rate as per item No. 3.4) LABOUR 0155 Mason Day 0.67 0115 Coolie Day 0.75 0101 Bhisti Day 0.92 9999 Scaffolding and sundries L.S. 12.61 0367 Cement tonne 0.02 2209 Carriage of Cement tonne 0.02 0155 Mason Day 0.27 0115 Coolie Day 0.27 9999 Scaffolding and sundries L.S. 8.06 Add water charges @ 1% on

Rate 2971.81

287.00 247.00 260.00 1.49 5000.00 77.87 287.00 247.00 1.49 Total: 1321.22

Add C.P & OH @15% on 1334.43 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 153.46 Rs 153.45

Item Code: 13.8.1 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) Cum 0.172 3631.93 (Rate as item no. 3.3) LABOUR 0155 Mason Day 0.80 287.00 0115 Coolie Day 0.88 247.00 0101 Bhisti Day 0.99 260.00 9999 Scaffolding and sundries L.S. 12.61 1.49 0367 Cement tonne 0.02 5000.00 2209 Carriage of Cement tonne 0.02 77.87 0155 Mason Day 0.27 287.00 0115 Coolie Day 0.27 247.00 9999 Scaffolding and sundries L.S. 8.06 1.49

DSR-12

Page 508 of 2298

Add water charges @ 1% on

Total: 1605.59

Add C.P & OH @15% on 1621.65 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 186.49 Rs 186.50

Item Code: 13.8.2 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.172 2971.81 (Rate as item no. 3.4) LABOUR 0155 Mason Day 0.80 287.00 0115 Coolie Day 0.88 247.00 0101 Bhisti Day 0.99 260.00 9999 Scaffolding and sundries L.S. 12.61 1.49 0367 Cement tonne 0.02 5000.00 2209 Carriage of Cement tonne 0.02 77.87 0155 Mason Day 0.27 287.00 0115 Coolie Day 0.27 247.00 9999 Scaffolding and sundries L.S. 8.06 1.49 Total: Add water charges @ 1% on 1492.05 Add C.P & OH @15% on 1506.97 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 173.30 Rs 173.30

Item Code: 13.9.1 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Code 03.008 0155 0115 0101 9999 0367 2209 0155 0115 9999

Description MATERIALS Cement mortar 1:3 (1 cement : 3 coarse sand) LABOUR Mason Coolie Bhisti Scaffolding and sundries Cement Carriage of Cement Mason Coolie Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.144

4145.53

Day Day Day L.S. tonne tonne Day Day L.S.

0.67 0.75 0.92 12.61 0.02 0.02 0.27 0.27 8.06

287.00 247.00 260.00 1.49 5000.00 77.87 287.00 247.00 1.49 Total: 1490.24

Add water charges @ 1% on

Add C.P & OH @15% on 1505.14 Cost for 10.00 Sqm

DSR-12

Page 509 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 173.09 Rs 173.10

Item Code: 13.9.2 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Code 03.008 0155 0115 0101 9999 0367 2209 0155 0115 9999

Description MATERIALS Cement mortar 1:3 (1 cement : 3 coarse sand) LABOUR Mason Coolie (as per cs1) Bhisti Scaffolding and sundries Cement Carriage of Cement Mason Coolie Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.224

4145.53

Day Day Day L.S. tonne tonne Day Day L.S.

0.94 1.02 1.10 12.61 0.02 0.02 0.27 0.27 8.06

287.00 247.00 260.00 1.49 5000.00 77.87 287.00 247.00 1.49 Total: 2012.86

Add water charges @ 1% on

Add C.P & OH @15% on 2032.99 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 233.79 Rs 233.80

Item Code: 13.10 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum 0.172 4145.53 (Rate as per item no. 3.8) LABOUR 0155 Mason Day 0.80 287.00 0115 Coolie Day 0.88 247.00 0101 Bhisti Day 0.99 260.00 9999 Scaffolding and sundries L.S. 12.61 1.49 0367 Cement tonne 0.02 5000.00 2209 Carriage of Cement tonne 0.02 77.87 0155 Mason Day 0.27 287.00 0115 Coolie Day 0.27 247.00 9999 Scaffolding and sundries L.S. 8.06 1.49 Total: Add water charges @ 1% on 1693.93 Add C.P & OH @15% on 1710.87 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 196.75 Rs 196.75

Page 510 of 2298

Item Code: 13.11 18 mm CP in two coats under layer 12 mm thick CP 1:5 (1 cement: 5 coarse sand) top layer 6mm thick CP 1:6 (1 cement: 6 fine sand). Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 03.010 Cement mortar 1:5 (1 cement : 5 coarse sand) Cum 0.144 3129.96 coarse sand) (Rate as per item no. 3.10) 03.006 Cement mortar 1:6 (1 cement : 6 fine sand) Cum 0.072 2311.69 sand). (Rate as per item 3.6) LABOUR 0155 Mason Day 1.21 287.00 0115 Coolie Day 1.29 247.00 0101 Bhisti Day 1.05 260.00 9999 Scaffolding and sundries L.S. 12.61 1.49 Total: Add water charges @ 1% on 1574.84 Add C.P & OH @15% on 1590.59 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 182.92 Rs 182.90

Item Code: 13.12 18 mm CPin two coats under layer 12 mm thick CP 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick CP 1:3 (1 cement: 3 coarse sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 03.010 Cement mortar 1:5 (1 cement : 5 coarse sand) Cum 0.144 3129.96 coarse sand) (Rate as per item no. 3.10) 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum 0.072 4145.53 coarse sand). (Rate as per item no. 3.8) LABOUR 0155 Mason Day 1.21 287.00 0115 Coolie Day 1.29 247.00 0101 Bhisti Day 1.05 260.00 9999 Scaffolding and sundries L.S. 12.61 1.49 Total: Add water charges @ 1% on 1706.88 Add C.P & OH @15% on 1723.95 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 198.25 Rs 198.25

Item Code: 13.13 12 mm cement plaster of mix in CM1:4 (1 cement: 4 fine sand) Code 03.012

0155

DSR-12

Description MATERIALS Cement Mortar 1:2 (1 cement : 2 stone dust) (Rate as per item no. 3.12) LABOUR Mason

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.144

4678.61

Day

0.67

287.00

Page 511 of 2298

0115 0101 9999

Coolie Bhisti Scaffolding and sundries

Day Day L.S.

0.75 0.92 12.61

Add water charges @ 1% on

247.00 260.00 1.49 Total: 1309.25

Add C.P & OH @15% on 1322.34 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 152.07 Rs 152.05

Item Code: 13.14 15mm CP 1:2 (1 cement : 2 stone dust) on the rough _x000D_ Code 03.012

0155 0115 0101 9999

Description MATERIALS Cement Mortar 1:2 (1 cement : 2 stone dust) (Rate as per item no. 3.12) LABOUR Mason Coolie Bhisti Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.172

4678.61

Day Day Day L.S.

0.80 0.88 0.99 12.61

287.00 247.00 260.00 1.49 Total: 1527.87

Add water charges @ 1% on

Add C.P & OH @15% on 1543.15 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 177.46 Rs 177.45

Item Code: 13.15 20 mm CP 1:2 (1 cement : 2 stone dust) Code 03.012

0155 0115 0101 9999

Description MATERIALS Cement Mortar 1:2 (1 cement : 2 stone dust) (Rate as per item no. 3.12) LABOUR Mason Coolie Bhisti Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.224

4678.61

Day Day Day L.S.

0.94 1.02 1.10 12.61

287.00 247.00 260.00 1.49 Total: 1874.52

Add water charges @ 1% on

Add C.P & OH @15% on 1893.27 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 217.73 Rs 217.75

Item Code: 13.16.1 6 mm CP of mix : 1:3 (1 cement: 3 fine sand) Details of Cost for : 10.00 Sqm

DSR-12

Page 512 of 2298

Code 03.003 0155 0115 0101 9999 9999

Description Unit MATERIALS : Cement mortar 1:3 (1 cement : 3 fine sand) Cum Mason (avge) Day LABOUR : Coolie Day Bhisthi Day Extra for removing burrs, cleaning with wirebrushes, pock L.S. making with pointed tool etc. Scaffolding and sundries L.S.

Quantity

Rate

0.072 0.51

3631.93 287.00

0.75 0.92 13.39

247.00 260.00 1.49

11.70

1.49 Total: 869.70

Add water charges @ 1% on

Add C.P & OH @15% on 878.40 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 101.02 Rs 101.00

Item Code: 13.17 6 mm CP 1:3 (1 cement: 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) Cum 0.072 3631.93 LABOUR 0155 Mason Day 0.51 287.00 0115 Coolie Day 0.75 247.00 0101 Bhisti Day 0.92 260.00 9999 Extra for removing burrs, cleaning with wire L.S. 13.39 1.49 brushes, pock making with pointed tool etc. complete. 9999 Scaffolding and sundries L.S. 11.70 1.49 0367 Cement tonne 0.02 5000.00 2209 Carriage of Cement tonne 0.02 77.87 0155 Mason Day 0.27 287.00 0115 Coolie Day 0.27 247.00 9999 Scaffolding and sundries L.S. 8.06 1.49 0776 Satna lime quint 0.01 230.00 9999 Indigo gum etc L.S. 2.08 1.49 9999 Sundries ladder etc. L.S. 0.52 1.49 0141 White Washer Day 0.07 260.00 0115 Coolie Day 0.07 247.00 9999 Sundries L.S. 2.73 1.49 Total: Add water charges @ 1% on 1173.18 Add C.P & OH @15% on 1184.91 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 136.27 Rs 136.25

Item Code: 13.18 Code 0367

DSR-12

Description LABOUR Cement

Details of Cost for : 10.00 Sqm Unit Quantity tonne

0.022

Rate 5000.00

Page 513 of 2298

2209 0155 0115 9999

Carriage of Cement Mason Coolie Scaffolding and sundries

tonne Day Day L.S.

0.022 0.27 0.27 8.06

Add water charges @ 1% on

77.87 287.00 247.00 1.49 Total: 267.90

Add C.P & OH @15% on 270.58 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 31.12 Rs 31.10

Item Code: 13.19.1 Rough cast plaster upto 10m height above GL with a mixture of sand and gravel or crushed stone in two layers, 2mm CP 1:4 10mm CP 1:3 - Ordinary cement Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). Cum 0.144 3485.41 Cement mortar 1:4(1 cement: 4 coarse sand). (Rate as per item no. 3.9) 0155 Mason Day 0.67 287.00 0115 Beldar Day 0.75 247.00 0101 Bhisti Day 0.92 260.00 9999 Scaffolding and sundries L.S. 9.88 1.49 Top layer 10 mm thick cement plaster 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) Cum 0.12 3631.93 0155 Mason Day 0.61 287.00 0114 Beldar Day 0.69 247.00 0101 Bhisti Day 0.85 260.00 9999 Scaffolding and sundries L.S. 9.88 1.49 1179 Crushed stone 2.36 mm to 12.5 mm size cum 0.10 915.00 0101 Bhisti Day 0.01 260.00 0777 Grounded hydrated lime (factory made) quint 0.09 220.00 9999 Carriage of lime L.S. 3.64 1.49 0155 Mason Day 0.50 287.00 0114 Beldar Day 0.50 247.00 0101 Bhisti Day 0.10 260.00 9999 Scaffolding and sundries L.S. 9.88 1.49 Labour for scooping 0123 Mason 1st class Day 0.25 301.00 0114 Beldar Day 0.25 247.00 Total: Add water charges @ 1% on 2714.45 Add C.P & OH @15% on 2741.59 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 315.28 Rs 315.30

Item Code: 13.20 Pebble dash plaster upto 10m height above GL with a mixture of washed pebble or crushed stone 6mm to 12.5mm size in two layers - 12mm CP 1:4 - 10mm CP 1:3 Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS:

DSR-12

Page 514 of 2298

03.009 0155 0114 0101 9999 03.003 0155 0114 0101 9999 1179 0101 0777 9999 0155 0114 0101 9999 9999

Cement mortar 1:4 (1 cement : 4 coarse sand). LABOUR : Mason (average) Beldar Bhisti Scaffolding and sundries Cement mortar 1:3 (1 cement : 3 fine sand) Mason (average) Beldar Bhisti Scaffolding and sundries Sand and gravel or crushed stone 2.36 mm to 12.5 mm size Bhisti Grounded hydrated lime (factory made) Carriage of lime Mason (average) Beldar Bhisti Scaffolding and sundries Scaffolding and sundries

Cum

0.144

3485.41

Day Day Day L.S. Cum Day Day Day L.S.

0.67 0.75 0.92 9.88 0.12 0.61 0.69 0.85 9.88

287.00 247.00 260.00 1.49 3631.93 287.00 247.00 260.00 1.49

cum Day quint L.S. Day Day Day L.S. L.S.

0.10 0.01 0.09 3.64 0.50 0.50 0.10 9.88 4.42

915.00 260.00 220.00 1.49 287.00 247.00 260.00 1.49 1.49 Total: 2584.04

Add water charges @ 1% on

Add C.P & OH @15% on 2609.88 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 300.14 Rs 300.15

Item Code: 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Code

1213 9999

Details of Cost for : 1.48 units Description Unit Quantity Detail of cost for 12 mm cement plaster 1:3 (1 Cement: 3 sand) = 10 sqm. or 1.48 bags of cement used in the mix Cement required for 10 sqm = 73.89 kg. Water proofing material required @ 1 kg per 50 kg of cement = 1.48 kg. Water proofing materials kilog 1.48 Sundries L.S. 7.15 Add water charges @ 1% on

Rate

25.00 1.49 Total: 47.65

Add C.P & OH @15% on 48.13 Cost for 1.48 units Rate per Units: Rate as per DSR-12:

Rs 37.40 Rs 37.40

Item Code: 13.22 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Code 9999

DSR-12

Description Scaffolding and sundries

Details of Cost for : 10.00 Sqm Unit Quantity L.S. 53.82

Rate 1.49

Page 515 of 2298

0155 0115 0101 9999

LABOUR Mason Coolie Bhisti Sundries

Day Day Day L.S.

0.20 0.30 0.10 7.15

Add water charges @ 1% on

287.00 247.00 260.00 1.49 Total: 248.34

Add C.P & OH @15% on 250.82 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 28.84 Rs 28.85

Item Code: 13.23.1 Extra for plastering on circular work not exceeding 6 m in radius: In one coat Details of Cost for : 10.00 Sqm Code Description Unit Quantity LABOUR 0155 Mason Day 0.20 0114 Beldar Day 0.20 9999 Sundries L.S. 7.15 Add water charges @ 1% on

Rate 287.00 247.00 1.49 Total: 117.45

Add C.P & OH @15% on 118.62 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 13.64 Rs 13.65

Item Code: 13.23.2 Extra for plastering on circular work not exceeding 6 m in radius: In two coats Details of Cost for : 10.00 Sqm Code Description Unit Quantity LABOUR 0155 Mason Day 0.30 0114 Beldar Day 0.30 9999 Sundries L.S. 13.39 Add water charges @ 1% on

Rate 287.00 247.00 1.49 Total: 180.15

Add C.P & OH @15% on 181.95 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 20.92 Rs 20.90

Item Code: 13.24.1 Extra for plastering done on moulding cornices or_x000D_ architraves including neat finish to line and level: _x000D_ Code 0155 0114 0115

DSR-12

Description LABOUR Mason Beldar Coolie

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day

3.00 2.00 1.00

Rate 287.00 247.00 247.00

Page 516 of 2298

0101 9999

Bhisti Sundries

Day L.S.

0.25 13.39

Add water charges @ 1% on

260.00 1.49 Total: 1686.95

Add C.P & OH @15% on 1703.82 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 195.94 Rs 195.95

Item Code: 13.24.2 Extra for plastering done on moulding cornices or_x000D_ architraves including neat finish to line and level: _x000D_ Code 0155 0114 0115 0101 9999

Description LABOUR Mason Beldar Coolie Bhisti Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day Day L.S.

5.00 3.00 2.00 0.33 13.39

Add water charges @ 1% on

Rate 287.00 247.00 247.00 260.00 1.49 Total: 2775.75

Add C.P & OH @15% on 2803.51 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 322.40 Rs 322.40

Item Code: 13.25.1 Extra for plastering : Spherical ceiling Code 0155 0114 9999

Description LABOUR Mason Beldar Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

0.75 0.74 26.91

Add water charges @ 1% on

Rate 287.00 247.00 1.49 Total: 438.13

Add C.P & OH @15% on 442.51 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 50.89 Rs 50.90

Item Code: 13.25.2 Extra for plastering : Groined ceiling Code 0155 0114 9999

DSR-12

Description LABOUR Mason Beldar Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

0.80 0.80 34.06

Rate 287.00 247.00 1.49 Total:

Page 517 of 2298

Add water charges @ 1% on

477.95

Add C.P & OH @15% on 482.73 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 55.51 Rs 55.50

Item Code: 13.25.3 Extra for plastering : Flewing soffits Code 0155 0114 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description LABOUR Mason Beldar Sundries

Day Day L.S.

0.50 0.50 13.39

Add water charges @ 1% on

Rate 287.00 247.00 1.49 Total: 286.95

Add C.P & OH @15% on 289.82 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 33.33 Rs 33.35

Item Code: 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface .. .. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS Plaster of paris 10x0.002x1121 = 22.42kg Add 2% wastage= 0.45kg Total = 22.45kg Say23kg 0869 Plaster of Paris kilog 23.00 9999 Carriage of plaster of paris L.S. 3.90 LABOUR 0122 Mason special Day 0.91 0114 Beldar Day 0.91 9999 Scaffolding and sundries L.S. 83.98 Add water charges @ 1% on

Rate

4.00 1.49 301.00 247.00 1.49 Total: 721.62

Add C.P & OH @15% on 728.84 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 83.82 Rs 83.80

Item Code: 13.27 Extra for lining out plaster to imitate stone or concrete blocks walling Code 0155 0114 9999

DSR-12

Description LABOUR Mason Beldar Solution of lime putty

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

0.50 0.50 1.82

Rate 287.00 247.00 1.49

Page 518 of 2298

Add water charges @ 1% on

Total: 269.71

Add C.P & OH @15% on 272.41 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 31.33 Rs 31.35

Item Code: 13.28.1 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Flush Band Details of Cost for : 100.00 units Code Description Unit Quantity MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.014 (Rate as per item no. 3.4) LABOUR 0155 Mason Day 0.27 0115 Coolie Day 0.27 0101 Bhisti Day 0.05 9999 Sundries L.S. 1.43 Add water charges @ 1% on

Rate 2971.81

287.00 247.00 260.00 1.49 Total: 200.92

Add C.P & OH @15% on 202.93 Cost for 100.00 units Rate per Cm/mtr: Rate as per DSR-12:

Rs 2.33 Rs 2.35

Item Code: 13.28.2 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Sunk Band Details of Cost for : 100.00 units Code Description Unit Quantity MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.014 (Rate as per item no. 3.4) LABOUR 0155 Mason Day 0.30 0115 Coolie Day 0.30 0101 Bhisti Day 0.05 9999 Sundries L.S. 2.08 Add water charges @ 1% on

Rate 2971.81

287.00 247.00 260.00 1.49 Total: 217.91

Add C.P & OH @15% on 220.09 Cost for 100.00 units Rate per Cm/mtr: Rate as per DSR-12:

Rs 2.53 Rs 2.55

Item Code: 13.28.3 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Raised Band Details of Cost for : 100.00 units Code Description Unit Quantity Rate MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.014 2971.81

DSR-12

Page 519 of 2298

0155 0115 0101 9999

(Rate as per item no. 3.4) LABOUR Mason Coolie Bhisti Sundries

Day Day Day L.S.

0.35 0.35 0.05 2.73

Add water charges @ 1% on

287.00 247.00 260.00 1.49 Total: 245.58

Add C.P & OH @15% on 248.04 Cost for 100.00 units Rate per Cm/mtr: Rate as per DSR-12:

Rs 2.85 Rs 2.85

Item Code: 13.28.4 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Moulded Band Details of Cost for : 100.00 units Code Description Unit Quantity MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.014 (Rate as per item No 3.4) LABOUR 0155 Mason Day 0.65 0115 Coolie Day 0.65 0101 Bhisti Day 0.05 9999 Sundries L.S. 1.56 Add water charges @ 1% on

Rate 2971.81

287.00 247.00 260.00 1.49 Total: 404.03

Add C.P & OH @15% on 408.07 Cost for 100.00 units Rate per Cm/mtr: Rate as per DSR-12:

Rs 4.69 Rs 4.70

Item Code: 13.29.1 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand): Flush Band Details of Cost for : 100.00 units Code Description Unit Quantity MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.02 (Rate as per item no. 3.4) LABOUR 0155 Mason Day 0.32 0115 Coolie Day 0.32 0101 Bhisti Day 0.06 9999 Sundries L.S. 2.08 Add water charges @ 1% on

Rate 2971.81

287.00 247.00 260.00 1.49 Total: 249.02

Add C.P & OH @15% on 251.51 Cost for 100.00 units Rate per Cm/mtr: Rate as per DSR-12:

DSR-12

Rs 2.89 Rs 2.90

Page 520 of 2298

Item Code: 13.29.2 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand): Sunk Band Details of Cost for : 100.00 units Code Description Unit Quantity MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.02 (rate as per item no. 3.4) LABOUR 0155 Mason Day 0.36 0115 Coolie Day 0.36 0101 Bhisti Day 0.06 9999 Sundries L.S. 2.73 Add water charges @ 1% on

Rate 2971.81

287.00 247.00 260.00 1.49 Total: 271.35

Add C.P & OH @15% on 274.06 Cost for 100.00 units Rate per Cm/mtr: Rate as per DSR-12:

Rs 3.15 Rs 3.15

Item Code: 13.29.3 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand): Raised Band Details of Cost for : 100.00 units Code Description Unit Quantity MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.02 (rate as per item no. 3.4) LABOUR 0155 Mason Day 0.42 0115 Coolie Day 0.42 0101 Bhisti Day 0.06 9999 Sundries L.S. 4.42 Add water charges @ 1% on

Rate 2971.81

287.00 247.00 260.00 1.49 Total: 305.91

Add C.P & OH @15% on 308.97 Cost for 100.00 units Rate per Cm/mtr: Rate as per DSR-12:

Rs 3.55 Rs 3.55

Item Code: 13.29.4 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand): Moulded Band Details of Cost for : 100.00 units Code Description Unit Quantity MATERIALS 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.024 (rate as per item no. 3.4) LABOUR 0155 Mason Day 0.86 0115 Coolie Day 0.86 0101 Bhisti Day 0.05 9999 Sundries L.S. 2.73

DSR-12

Rate 2971.81

Add water charges @ 1% on

287.00 247.00 260.00 1.49 Total: 547.63

Add C.P & OH @15% on

553.11

Page 521 of 2298

Cost for 100.00 units Rate per Cm/mtr: Rate as per DSR-12:

Rs 6.36 Rs 6.35

Item Code: 13.30 18 mm thick moulded CM band in two coats - 12mm 1:5 and 6mm 1:4 Code

03.010 03.004

0155 0115 0101 9999

Description Detail of cost for 10 metre long and 10 cm wide band MATERIALS Cement mortar 1:5 (1 cement : 5 coarse sand) (rate as per item no. 3.10) Cement mortar 1:4 (1 cement : 4 fine sand) (rate as per item no. 3.4) LABOUR Mason Coolie Bhisti Sundries

Details of Cost for : 100.00 units Unit Quantity

Rate

Cum

0.014

3129.96

Cum

0.01

2971.81

Day Day Day L.S.

0.86 0.86 0.05 2.73

287.00 247.00 260.00 1.49 Total: 549.85

Add water charges @ 1% on

Add C.P & OH @15% on 555.35 Cost for 100.00 units Rate per Cm/mtr: Rate as per DSR-12:

Rs 6.39 Rs 6.40

Item Code: 13.31.1 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : Flush / Ruled/ Struck or weathered pointing. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) Cum 0.03 3631.93 (rate as per item no. 3.3) LABOUR 0155 Mason Day 0.50 287.00 0115 Coolie Day 0.60 247.00 0101 Bhisti Day 0.93 260.00 9999 Sundries L.S. 7.15 1.49 9999 Scaffolding and racking out joints including sundries L.S. 14.30 1.49 Total: Add water charges @ 1% on 674.42 Add C.P & OH @15% on 681.16 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 78.33 Rs 78.35

Item Code: 13.31.2 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : Raised and cut pointing

Code

DSR-12

Description

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Page 522 of 2298

03.003

0155 0115 0101 9999 9999

MATERIALS Cement mortar 1:3 (1 cement : 3 fine sand) (rate as per item no. 3.3) LABOUR Mason Coolie Bhisti Sundries Scaffolding and racking out joints including sundries

Cum

0.046

3631.93

Day Day Day L.S. L.S.

1.07 1.31 1.00 7.15 16.12

287.00 247.00 260.00 1.49 1.49 Total: 1092.40

Add water charges @ 1% on

Add C.P & OH @15% on 1103.32 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 126.88 Rs 126.90

Item Code: 13.32.1 Pointing on tile brick work with cement mortar 1:3 (1 cement:3 fine sand) : Flush/ Ruled/ Struck or weathered pointing

Code 03.003 9999 0155 0115 0101 9999

Description MATERIALS Cement mortar 1:3 (1 cement : 3 fine sand) (rate as per item no. 3.3) Sundries LABOUR Mason Coolie Bhisti Scaffolding and racking out joints including sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.046

3631.93

L.S.

7.15

1.49

Day Day Day L.S.

0.67 0.80 1.28 16.12

287.00 247.00 260.00 1.49 Total: 924.43

Add water charges @ 1% on

Add C.P & OH @15% on 933.67 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 107.37 Rs 107.35

Item Code: 13.33.1 Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : Flush/ Ruled pointing Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) Cum 0.023 (rate as per item no. 3.3) 9999 Sundries L.S. 7.15 LABOUR 0155 Mason Day 0.92 0115 Coolie Day 1.37 0101 Bhisti Day 0.93 9999 Scaffolding and racking out joints including sundries L.S. 16.12

DSR-12

Rate 3631.93 1.49

Add water charges @ 1% on

287.00 247.00 260.00 1.49 Total: 962.43

Add C.P & OH @15% on

972.05

Page 523 of 2298

Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 111.79 Rs 111.80

Item Code: 13.33.2 Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : Raised and cut pointing Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 03.003 Cement mortar 1:3 (1 cement : 3 fine sand) Cum 0.038 (rate as per item no. 3.3) 9999 Sundries L.S. 7.15 LABOUR 0155 Mason Day 2.00 0115 Coolie Day 2.96 0101 Bhisti Day 1.00 9999 Scaffolding and racking out joints including sundries L.S. 16.12 Add water charges @ 1% on

Rate 3631.93 1.49 287.00 247.00 260.00 1.49 Total: 1737.80

Add C.P & OH @15% on 1755.18 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 201.85 Rs 201.85

Item Code: 13.34 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement: 3 marble dust) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 03.016 White Cement Mortar 1:3 (1 white cement : 3 marble dust) Cum 0.038

9999 0155 0115 0101 9999

marble dust. (rate as per item no. 3.16) Sundries LABOUR Mason Coolie Bhisti Scaffolding and racking out joints including sundries

Rate 7587.13

L.S.

7.15

1.49

Day Day Day L.S.

2.00 2.96 1.00 16.12

287.00 247.00 260.00 1.49 Total: 1888.10

Add water charges @ 1% on

Add C.P & OH @15% on 1906.98 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 219.30 Rs 219.30

Item Code: 13.35.1 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine sand): Flush/ Ruled pointing Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 03.002 Cement mortar 1:2 (1Cement : 2 fine sand) Cum 0.015 (rate as per item no. 3.2)

DSR-12

Rate 4407.86

Page 524 of 2298

0155 0115 0101 9999

LABOUR Mason Coolie Bhisti Scaffolding and racking out joints including sundries

Day Day Day L.S.

0.47 0.69 0.59 16.12

Add water charges @ 1% on

287.00 247.00 260.00 1.49 Total: 548.86

Add C.P & OH @15% on 554.35 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 63.75 Rs 63.75

Item Code: 13.36 Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate LABOUR 9999 Scaffolding L.S. 13.39 1.49 9999 sundries L.S. 13.39 1.49 Total: Add water charges @ 1% on 39.90 Add C.P & OH @15% on 40.30 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 4.64 Rs 4.65

Item Code: 13.37.1 White washing with lime to give an even shade: Code 0775 9999 0141 0115 9999 9999

Description MATERIALS : White lime Carriage of lime LABOUR : White washer Coolie Indigo gum etc Sundries ladders etc

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

quint L.S.

0.03 0.91

410.00 1.49

Day Day L.S.

0.20 0.10 4.42

260.00 247.00 1.49

L.S.

2.73

1.49 Total: 101.02

Add water charges @ 1% on

Add C.P & OH @15% on 102.03 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 11.73 Rs 11.75

Item Code: 13.38 Code

Description

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

MATERIALS :

DSR-12

Page 525 of 2298

0776 9999

Satna lime Carriage of lime

9999

Indigo gum etc LABOUR White washer Coolie Sundries ladders etc

0141 0115 9999

quint

0.01

230.00

L.S. L.S.

2.08 0.52

1.49 1.49

Day Day L.S.

0.08 0.04 2.73

260.00 247.00 1.49 Total: 40.92

Add water charges @ 1% on

Add C.P & OH @15% on 41.33 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 4.75 Rs 4.75

Item Code: 13.39.1 Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 0775 Dehradun white lime quint 0.03 410.00 9999 Carriage of lime L.S. 8.06 1.49 9999 Add for colouring stuff L.S. 0.91 1.49 LABOUR 0141 White Washer Day 0.30 260.00 0115 Coolie Day 0.10 247.00 9999 Indigo gum etc L.S. 4.42 1.49 9999 Sundries ladders etc L.S. 2.73 1.49 Total: Add water charges @ 1% on 139.03 Add C.P & OH @15% on 140.42 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 16.15 Rs 16.15

Item Code: 13.39.2 Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 0775 Dehradun white lime quint 0.03 410.00 9999 Carriage of lime L.S. 8.06 1.49 9999 Add for colouring stuff L.S. 0.91 1.49 LABOUR 0141 White Washer Day 0.30 260.00 0115 Coolie Day 0.10 247.00 9999 Indigo gum etc L.S. 2.73 1.49 9999 Sundries ladders etc L.S. 2.73 1.49 Total: Add water charges @ 1% on 136.51 Add C.P & OH @15% on

DSR-12

137.88

Page 526 of 2298

Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 15.86 Rs 15.85

Item Code: 13.40 Distempering with dry distemper (two or more coats) on new work, over and including priming coat of whiting to give an even shade. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 1216 Whiting quint 0.01 400.00 9999 Putty, glue etc L.S. 2.73 1.49 0815 Dry distemper kilog 1.50 35.00 9999 Carriage of material L.S. 1.56 1.49 9999 Brushes, sand paper etc L.S. 7.15 1.49 LABOUR: 0131 Painter Day 0.80 273.00 0115 Coolie Day 0.40 247.00 9999 Sundries L.S. 5.38 1.49 Total: Add water charges @ 1% on 398.76 Add C.P & OH @15% on 402.75 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 46.32 Rs 46.30

Item Code: 13.41.1 Distempering with OBD New work (two or more coats) over and including priming coat with cement primer. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 0820 Cement primer litre 0.70 9999 Brushes, putty etc L.S. 7.15 9999 Sundries including Carriage L.S. 8.06 0816 Dry distemper kilog 1.50 9999 Carriage of material L.S. 4.42 9999 Brushes, sand paper and putty for filling holes L.S. 11.70 LABOUR 0131 Painter Day 1.00 0115 Coolie Day 0.50 9999 Sundries L.S. 8.06 Add water charges @ 1% on

Rate 80.00 1.49 1.49 42.00 1.49 1.49 273.00 247.00 1.49 Total: 574.19

Add C.P & OH @15% on 579.93 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 66.69 Rs 66.70

Item Code: 13.42.1 Distempering with 1st quality acrylic washable distemper Two or more coats on new work.

DSR-12

Page 527 of 2298

Code 0816 9999 9999 0131 0114 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS Oil bound washable distemper/ Acrylic distemper Carriage of material Brushes, sand paper and putty for filling holes LABOUR Painter Beldar Sundries

Rate

kilog L.S. L.S.

1.50 4.42 11.57

42.00 1.49 1.49

Day Day L.S.

0.40 0.46 8.06

273.00 247.00 1.49 Total: 321.66

Add water charges @ 1% on

Add C.P & OH @15% on 324.88 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 37.36 Rs 37.35

Item Code: 13.43.1 Applying one coat of cement primer on wall surface : - Cement primer. Code 0820 9999 0131 0115 9999

Description MATERIALS: Cement primer Brushes, putty etc LABOUR: Painter Coolie Sundries including carriage

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S.

0.70 7.15

80.00 1.49

Day Day

0.40 0.20

273.00 247.00

L.S.

8.06

1.49 Total: 237.26

Add water charges @ 1% on

Add C.P & OH @15% on 239.63 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 27.56 Rs 27.55

Item Code: 13.44.1 Finishing walls with water proofing cement paint : New work (Two or more coats ) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 0851 Water proofing cement paint kilog 3.84 9999 Carriage of material L.S. 1.56 LABOUR 0131 Painter Day 0.46 0115 Coolie Day 0.23 0101 Bhisti Day 0.10 9999 Brushes, sand paper etc L.S. 7.15 9999 Sundries L.S. 8.06 Add water charges @ 1% on

Rate 40.00 1.49 273.00 247.00 260.00 1.49 1.49 Total: 386.97

Add C.P & OH @15% on 390.84 Cost for 10.00 Sqm

DSR-12

Page 528 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 44.95 Rs 44.95

Item Code: 13.45.1 Finishing walls with textured exterior paint : New work (Two or more coats ) over a base coat of WP cement paint applied @ 2.20kg/10 sqm. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 8507 Textured exterior paint litre 3.28 198.00 0851 Water proofing cement paint kilog 2.20 40.00 9999 Carriage of material L.S. 1.56 1.49 LABOUR 0131 Painter Day 0.60 273.00 0115 Coolie Day 0.30 247.00 0101 Bhisti Day 0.05 260.00 9999 Brushes, sand paper etc L.S. 7.02 1.49 9999 Sundries L.S. 8.06 1.49 Total: Add water charges @ 1% on 1013.13 Add C.P & OH @15% on 1023.26 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 117.68 Rs 117.70

Item Code: 13.46.1 Finishing walls with Acrylic Smooth exterior paint : New work (Two or more coat ). Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 8505 Acrylic exterior paint litre 1.67 0851 Water proofing cement paint kilog 2.20 9999 Carriage of material L.S. 1.56 LABOUR 0131 Painter Day 0.60 0115 Coolie Day 0.30 0101 Bhisti Day 0.05 9999 Brushes, sand paper etc L.S. 7.15 9999 Sundries L.S. 8.06 Add water charges @ 1% on

Rate 130.00 40.00 1.49 273.00 247.00 260.00 1.49 1.49 Total: 580.98

Add C.P & OH @15% on 586.79 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 67.48 Rs 67.50

Item Code: 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats ). Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS

DSR-12

Page 529 of 2298

8506 0851 9999 0131 0115 0101 9999 9999

Premium Acrylic exterior paint Water proofing cement paint Carriage of material LABOUR Painter Coolie Bhisti Brushes, sand paper etc Sundries

litre kilog L.S.

1.43 2.20 1.56

230.00 40.00 1.49

Day Day Day L.S. L.S.

0.60 0.30 0.05 7.15 8.06

273.00 247.00 260.00 1.49 1.49 Total: 692.78

Add water charges @ 1% on

Add C.P & OH @15% on 699.71 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 80.47 Rs 80.45

Item Code: 13.48.1 Finishing walls with Deluxe Multi surface paint : Two or more coats Code 8504 8509 9999

0131 0115 0101 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS: Multi surface paint Special primer Carriage of materials

Rate

litre litre

1.25 0.75

272.00 83.00

L.S.

1.25

1.49

LABOUR: Painter Coolie Bhisthi

Day Day Day

0.60 0.30 0.05

273.00 247.00 260.00

Sundries

L.S. L.S.

7.02 8.06

1.49 1.49 Total: 677.48

Add water charges @ 1% on

Add C.P & OH @15% on 684.25 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 78.69 Rs 78.75

Item Code: 13.48.2 Painting wood work with Deluxe Multi surface paint Two or more coats Code 8504 8509 9999 0131 0115 0101 9999 9999

DSR-12

Description MATERIALS : Multi surface paint Special primer Carriage of material LABOUR: Painter Coolie Bhisthi Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre litre L.S.

0.90 0.75 1.56

272.00 83.00 1.49

Day Day Day L.S. L.S.

0.60 0.30 0.05 7.02 8.06

273.00 247.00 260.00 1.49 1.49 Total:

Page 530 of 2298

Add water charges @ 1% on

582.74

Add C.P & OH @15% on 588.57 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 67.69 Rs 67.70

Item Code: 13.48.3 Painting Steel work with Deluxe Multi surface paint Two or more coats Code 8504 8510 9999 0131 0115 0101 9999 9999

Description MATERIALS : Multi surface paint Metal Primer (U.G.) Carriage of material LABOUR: Painter Coolie Bhisthi Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre litre L.S.

0.90 0.80 1.56

272.00 107.00 1.49

Day Day Day L.S. L.S.

0.60 0.30 0.05 7.02 8.06

273.00 247.00 260.00 1.49 1.49 Total: 606.09

Add water charges @ 1% on

Add C.P & OH @15% on 612.15 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 70.40 Rs 70.40

Item Code: 13.50.1 Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 0823 Primer litre 0.75 9999 Putty L.S. 2.73 9999 Carriage L.S. 0.39 LABOUR 0131 Painter Day 0.25 0115 Coolie Day 0.25 9999 Brushes, sand paper etc L.S. 5.33 9999 Sundries L.S. 10.79 Add water charges @ 1% on

Rate 85.00 1.49 1.49 273.00 247.00 1.49 1.49 Total: 222.42

Add C.P & OH @15% on 224.64 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 25.83 Rs 25.85

Item Code: 13.50.2 Applying priming coat : With ready mixed aluminium primer on resinous wood and plywood Details of Cost for : 10.00 Sqm Code Description Unit Quantity

DSR-12

Rate

Page 531 of 2298

4201 9999

MATERIALS: Aluminium primer Putty

9999

Carriage

0131 0115 9999

LABOUR: Painter Coolie Brushes, sand paper etc

9999

Sundries

litre

0.75

72.00

L.S.

2.73

1.49

L.S.

0.39

1.49

Day Day

0.25 0.25

273.00 247.00

L.S. L.S.

5.33 10.79

1.49 1.49 Total: 212.67

Add water charges @ 1% on

Add C.P & OH @15% on 214.80 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 24.70 Rs 24.70

Item Code: 13.50.3 Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanised iron/steel works

Code 4202 9999 0131 0115 9999

Description MATERIALS Red oxide Zinc chromate yellow primer Carriage LABOUR Painter Coolie Brushes,sand paper including sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S.

0.54 0.52

68.00 1.49

Day Day L.S.

0.24 0.24 10.79

273.00 247.00 1.49 Total: 178.37

Add water charges @ 1% on

Add C.P & OH @15% on 180.15 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 20.72 Rs 20.70

Item Code: 13.50.4 Applying priming coat : With ready mixed red oxide zinc chromate primer on steel work (second coat) Details of Cost for : 10.00 Sqm Code Description Unit Quantity 4202 Zinc chromate - Red Oxide - primer litre 0.36 9999 Carriage L.S. 0.39 0131 Painter Day 0.12 0115 Coolie Day 0.12 9999 Brushes,sand paper including sundries L.S. 7.15 Add water charges @ 1% except on [A] i.e on

Rate 68.00 1.49 273.00 247.00 1.49 Total: 98.11

Add C.P & OH @15% except on [A] i.e on 99.09 Cost for 10.00 Sqm

DSR-12

Page 532 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 11.40 Rs 11.40

Item Code: 13.51.1 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : One coat Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 0801 Silicon and acrylic emulsion Ltr 1.80 140.00 9999 Carriage of material L.S. 0.52 1.49 9999 Putty etc., L.S. 2.73 1.49 LABOUR: 0131 Painter Day 0.27 273.00 0115 Coolie Day 0.27 247.00 9999 Brushes, sand paper etc., L.S. 5.33 1.49 9999 Sundries L.S. 10.79 1.49 Total: Add water charges @ 1% on 421.26 Add C.P & OH @15% on 425.47 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 48.93 Rs 48.95

Item Code: 13.51.2 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 0801 Silicon and acrylic emulsion Ltr 2.88 140.00 9999 Carriage of material L.S. 0.52 1.49 9999 Putty etc., L.S. 2.73 1.49 LABOUR: 0131 Painter Day 0.43 273.00 0115 Coolie Day 0.43 247.00 9999 Brushes, sand paper etc., L.S. 8.53 1.49 9999 Sundries L.S. 17.26 1.49 Total: Add water charges @ 1% on 670.07 Add C.P & OH @15% on 676.77 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 77.83 Rs 77.85

Item Code: 13.52.1 Finishing with Epoxy paint (two or more coats) appropriate priming coat, On steel work Details of Cost for : 10.00 Sqm Code Description Unit Quantity PRIMING COAT MATERIALS 4202 Primer litre 0.75 9999 Putty L.S. 2.73

DSR-12

Rate

68.00 1.49

Page 533 of 2298

9999 0131 0115 9999 9999

7239 9999 0131 0115 9999 9999

Carriage LABOUR Painter Coolie Brushes, sand paper etc Sundries EPOXY PAINTING MATERIALS Epoxy paint Carriage of material LABOUR Painter Coolie Putty, brushes, sand paper etc Sundries

L.S.

0.39

1.49

Day Day L.S. L.S.

0.25 0.25 5.46 10.66

273.00 247.00 1.49 1.49

litre L.S.

1.25 1.43

315.00 1.49

Day Day L.S. L.S.

0.54 0.54 6.76 8.06

273.00 247.00 1.49 1.49 Total: 908.43

Add water charges @ 1% on

Add C.P & OH @15% on 917.51 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 105.51 Rs 105.50

Item Code: 13.52.2 Finishing with Epoxy paint (two or more coats) appropriate priming coat, . On concrete work Details of Cost for : 10.00 Sqm Code Description Unit Quantity PRIMING COAT MATERIALS 0821 Primer litre 0.84 9999 Putty L.S. 13.52 9999 Carriage L.S. 0.52 LABOUR 0131 Painter Day 0.25 0115 Coolie Day 0.25 9999 Brushes, sand paper etc L.S. 2.73 9999 Sundries L.S. 8.06 EPOXY PAINTING MATERIALS 7239 Epoxy paint litre 1.21 9999 Materials for filling in holes and cracks (putty etc) L.S. 6.76 9999 Carriage of material L.S. 1.43 LABOUR 0131 Painter Day 0.54 0115 Coolie Day 0.54 9999 Putty, brushes, sand paper etc L.S. 10.79 9999 Sundries L.S. 6.76 Add water charges @ 1% on

Rate

80.00 1.49 1.49 273.00 247.00 1.49 1.49

315.00 1.49 1.49 273.00 247.00 1.49 1.49 Total: 934.49

Add C.P & OH @15% on 943.83 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 108.54 Rs 108.55

Item Code: 13.53.1

DSR-12

Page 534 of 2298

Painting on G.S. sheet with synthetic enamel paint : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate PRIMING COAT MATERIALS 4202 Steel primer litre 0.36 68.00 9999 Carriage L.S. 0.39 1.49 LABOUR 0131 Painter Day 0.12 273.00 0114 Beldar Day 0.12 247.00 9999 Brushes, sand paper etc L.S. 7.15 1.49 EPOXY PAINTING MATERIALS 0834 Synthetic enamel paint litre 0.80 135.00 9999 Carriage L.S. 1.43 1.49 LABOUR 0131 Painter Day 0.54 273.00 0115 Coolie Day 0.54 247.00 9999 Putty, brushes, sand paper etc L.S. 6.76 1.49 9999 Sundries L.S. 8.06 1.49 Total: Add water charges @ 1% on 511.12 Add C.P & OH @15% on 516.23 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 59.37 Rs 59.35

Item Code: 13.54.1 Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water

Code 4203 9999 9999 0131 0115 9999 9999

Description MATERIALS: Copper acetate Soft water Carriage LABOUR: Painter Coolie Brushes, sand paper etc. Sundries

Details of Cost for : 25.00 Sqm Unit Quantity

Rate

kilog L.S. L.S.

0.038 1.82 0.91

270.00 1.49 1.49

Day Day L.S. L.S.

0.60 0.60 35.88 35.88

273.00 247.00 1.49 1.49 Total: 433.25

Add water charges @ 1% on

Add C.P & OH @15% on 437.58 Cost for 25.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 20.13 Rs 20.15

Item Code: 13.54.2 Applying a coat of mordant solution on G.S. sheet : With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water Details of Cost for : 25.00 Sqm

DSR-12

Page 535 of 2298

Code 4204 4205 4206 9999 9999 4207 0131 0115 9999 9999

Description MATERIALS: Hydrochloric acid Copper chloride Copper nitrate Soft water Carriage Ammonium chloride LABOUR: Painter Coolie Brushes, sand paper etc. Sundries

Unit

Quantity

Rate

kilog kilog kilog L.S. L.S. kilog

0.013 0.013 0.013 1.82 0.91 0.013

32.00 272.00 200.00 1.49 1.49 15.00

Day Day L.S. L.S.

0.60 0.60 35.88 35.88

273.00 247.00 1.49 1.49 Total: 429.75

Add water charges @ 1% on

Add C.P & OH @15% on 434.05 Cost for 25.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 19.97 Rs 19.95

Item Code: 13.55.1 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint on new work : 100 mm diameter pipes Details of Cost for : 30.00 m Code Description Unit Quantity Rate 4202 Zinc chromate - Red Oxide - primer litre 0.54 68.00 9999 Carriage L.S. 0.52 1.49 0131 Painter Day 0.24 273.00 0115 Coolie Day 0.24 247.00 9999 Brushes, sand paper etc L.S. 10.79 1.49 0828 Anti-corrosive bitumastic paint litre 0.95 85.00 9999 Carriage L.S. 1.43 1.49 0131 Painter Day 0.54 273.00 0115 Coolie Day 0.54 247.00 9999 Putty, sand paper etc L.S. 5.33 1.49 9999 Sundries L.S. 8.06 1.49 9999 Wire brushes for cleaning L.S. 5.33 1.49 9999 Extra for delays L.S. 61.10 1.49 Total: Add water charges @ 1% on 660.98 Add C.P & OH @15% on 667.59 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 25.59 Rs 25.60

Item Code: 13.55.2 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint on new work : 150 mm diameter pipes

DSR-12

Page 536 of 2298

Code 4202 0131 0115 9999

Description Zinc chromate - Red Oxide - primer Painter Coolie Brushes, sand paper etc

9999 0828 9999

Anti-corrosive bitumastic paint Carriage

0131 0115 9999

Painter Coolie Putty, sand paper etc

9999 9999

Sundries Wire brushes for cleaning

9999

Extra for delays

Details of Cost for : 30.00 m Unit Quantity litre 0.80 Day 0.36 Day 0.36

Rate 68.00 273.00 247.00

L.S. L.S. litre

15.99 0.91 1.41

1.49 1.49 85.00

L.S. Day Day

2.08 0.80 0.80

1.49 273.00 247.00

L.S. L.S.

8.06 11.06

1.49 1.49

L.S.

7.15

1.49

L.S.

94.12

1.49 Total: 985.12

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 994.97 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 38.14 Rs 38.20

Item Code: 13.56.1 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint new work. 100 mm diameter pipes Details of Cost for : 30.00 m Code Description Unit Quantity Rate Area=22/7 x 106.40/1000 x 30 m = 10.032 MATERIALS 4202 Red oxide Zinc chromate primer litre 0.54 68.00 9999 Carriage L.S. 0.52 1.49 LABOUR 0131 Painter Day 0.24 273.00 0115 Coolie Day 0.24 247.00 9999 Sundries L.S. 10.79 1.49 MATERIALS 0833 Synthetic enamel paint in black or chocolate shade litre 1.16 130.00 9999 Carriage L.S. 1.43 1.49 9999 Putty, sand paper etc. L.S. 5.33 1.49 LABOUR 0131 Painter Day 0.54 273.00 0115 Coolie Day 0.54 247.00 9999 Sundries L.S. 6.76 1.49 9999 Wire brushes for cleaning L.S. 11.96 1.49 9999 Extra for delays L.S. 66.43 1.49 Total: Add water charges @ 1% on 746.91 Add C.P & OH @15% on 754.38 Cost for 30.00 m Rate per One Metre:

DSR-12

Rs 28.92

Page 537 of 2298

Rate as per DSR-12:

Rs 28.90

Item Code: 13.56.2 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint new work. 150 mm diameter pipes Details of Cost for : 30.00 m Code Description Unit Quantity Rate Area=22/7 xl57.2mm x30m =14.82sqm MATERIALS 4202 Red oxide Zinc chromate primer litre 0.80 68.00 9999 Carriage L.S. 0.65 1.49 LABOUR 0131 Painter Day 0.36 273.00 0115 Coolie Day 0.36 247.00 9999 Sundries L.S. 15.99 1.49 MATERIALS 0833 Synthetic enamel paint in black or chocolate shade litre 1.72 130.00 9999 Carriage L.S. 2.08 1.49 9999 Putty, sand paper etc L.S. 7.93 1.49 LABOUR 0131 Painter Day 0.80 273.00 0115 Coolie Day 0.80 247.00 9999 Sundries L.S. 10.01 1.49 9999 Wire brushes for cleaning L.S. 17.81 1.49 9999 Extra for delays L.S. 101.40 1.49 Total: Add water charges @ 1% on 1113.46 Add C.P & OH @15% on 1124.59 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 43.11 Rs 43.10

Item Code: 13.57.1 Painting with oil type wood preservative : New work (two or more coats). Code

0859 9999 0131 0115 9999 9999

Description Detail of cost for 10 sqm MATERIALS Oil type wood preservative Carriage of material LABOUR Painter Coolie Brushes etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S.

1.00 0.52

70.00 1.49

Day Day L.S. L.S.

0.15 0.15 4.16 3.90

273.00 247.00 1.49 1.49 Total: 160.78

Add water charges @ 1% on

Add C.P & OH @15% on 162.39 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 18.68 Rs 18.70

Item Code: 13.58

DSR-12

Page 538 of 2298

P/A two coats of fire retardent paint Code 7240 9999 0131 0114 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS Fire retardant paint Carriage of material LABOUR Painter Beldar Putty, brushes, sand paper etc Sundries

Rate

litre L.S.

5.70 1.43

350.00 1.49

Day Day L.S. L.S.

0.54 0.54 6.76 8.06

273.00 247.00 1.49 1.49 Total: 2300.01

Add water charges @ 1% on

Add C.P & OH @15% on 2323.01 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 267.15 Rs 267.15

Item Code: 13.59 Code 9999 0324 9999 0771 0114 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS Lime Coal Tar Carriage of material Kerosene oil LABOUR Beldar Brushes etc Sundries

Rate

L.S. litre L.S. litre

1.43 2.80 1.43 0.50

1.49 25.00 1.49 30.00

Day L.S. L.S.

0.43 5.33 5.33

247.00 1.49 1.49 Total: 211.35

Add water charges @ 1% on

Add C.P & OH @15% on 213.46 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 24.55 Rs 24.55

Item Code: 13.60.1 Wall painting with plastic emulsion paint - Two or more coats on new work Code 0835 9999 9999 0131 0115 9999 9999

DSR-12

Description MATERIALS Plastic emulsion paint Materials for filling in holes and cracks (putty etc) Carriage of material LABOUR Painter Coolie Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S. L.S.

1.21 6.76 1.43

165.00 1.49 1.49

Day Day L.S. L.S.

0.54 0.54 10.79 6.76

Add water charges @ 1% on

273.00 247.00 1.49 1.49 Total: 518.80

Add C.P & OH @15% on

523.99

Page 539 of 2298

Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 60.26 Rs 60.25

Item Code: 13.61.1 Painting with synthetic enamel paint : Two or more coats on new work Code 0833 9999 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity litre 1.16 L.S. 5.33 L.S. 1.43 Day 0.54 Day 0.54 L.S. 6.76 L.S. 8.06

Description Synthetic enamel paint - black / chocolate color. Materials for filling in holes and cracks (putty etc) Carriage of material Painter Coolie Brushes, sand paper etc Sundries

Add water charges @ 1% on

Rate 130.00 1.49 1.49 273.00 247.00 1.49 1.49 Total: 463.75

Add C.P & OH @15% on 468.39 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 53.87 Rs 53.85

Item Code: 13.62.1 Painting with synthetic enamel paint Two or more coats on new work Code 0823 9999 9999 0131 0115 9999 9999 0833 9999 0131 0115 9999 9999

Description MATERIALS Primer Putty Carriage LABOUR Painter Coolie Brushes, sand paper etc Sundries MATERIALS Enamel paint Carriage of paint and material LABOUR Painter Coolie Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S. L.S.

0.75 2.73 0.39

85.00 1.49 1.49

Day Day L.S. L.S.

0.25 0.25 5.33 10.79

273.00 247.00 1.49 1.49

litre L.S.

1.16 1.43

130.00 1.49

Day Day L.S. L.S.

0.54 0.54 6.76 8.06

273.00 247.00 1.49 1.49 Total: 678.23

Add water charges @ 1% on

Add C.P & OH @15% on 685.01 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 78.78 Rs 78.80

Item Code: 13.63.1 Painting with aluminium paint: On new work .

DSR-12

Page 540 of 2298

Code 0826 9999 9999 0131 0115 9999 9999

Description MATERIALS Aluminium paint Carriage of paint and material Putty etc LABOUR Painter Coolie Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S. L.S.

0.80 1.43 5.33

115.00 1.49 1.49

Day Day L.S. L.S.

0.54 0.54 6.76 11.96

273.00 247.00 1.49 1.49 Total: 410.76

Add water charges @ 1% on

Add C.P & OH @15% on 414.87 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 47.71 Rs 47.70

Item Code: 13.64.1 Painting with acid proof paint of approved brand : On new work . Code 0827 9999 9999 0131 0115 9999 9999

Description MATERIALS Acid proof paint Carriage of paint Putty etc LABOUR Painter Coolie Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S. L.S.

1.16 1.43 5.33

105.00 1.49 1.49

Day Day L.S. L.S.

0.54 0.54 6.76 8.06

273.00 247.00 1.49 1.49 Total: 434.75

Add water charges @ 1% on

Add C.P & OH @15% on 439.10 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 50.50 Rs 50.50

Item Code: 13.65.1 Painting with black anti-corrosive bitumastic paint : Two or more coats on new work. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 0828 Black anticorrosive bitumastic paint litre 0.95 9999 Carriage L.S. 1.43 LABOUR 0131 Painter Day 0.54 0115 Coolie Day 0.54 9999 Putty, brushes, sand paper etc L.S. 5.33 9999 Sundries L.S. 8.06

DSR-12

Rate 85.00 1.49

Add water charges @ 1% on

273.00 247.00 1.49 1.49 Total: 383.63

Add C.P & OH @15% on

387.47

Page 541 of 2298

Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 44.56 Rs 44.55

Item Code: 13.66.1 Floor painting with floor enamel paint : Two or more coats on new work. Code 0831 9999 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS Floor enamel paint in all shades Carriage Putty etc LABOUR Painter Coolie Brushes, sand paper etc Sundries

Rate

litre L.S. L.S.

1.48 1.43 5.33

120.00 1.49 1.49

Day Day L.S. L.S.

0.54 0.54 6.76 8.06

273.00 247.00 1.49 1.49 Total: 490.55

Add water charges @ 1% on

Add C.P & OH @15% on 495.46 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 56.98 Rs 57.00

Item Code: 13.67.1 Varnishing with varnish Two or more coats of glue sizing with copal varnish Code 0856 0763 0857 9999 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS Undercoat flatting varnish Glue for sizing Copal varnish Carriage Putty for repair to holes etc LABOUR Painter (0.36+0.54=0.90) Coolie (0.36+0.54=0.90) Brushes, sand paper etc Sundries

Rate

litre kilog litre L.S. L.S.

0.70 0.07 1.16 1.43 5.33

65.00 65.00 125.00 1.49 1.49

Day Day L.S. L.S.

0.90 0.90 6.76 7.15

273.00 247.00 1.49 1.49 Total: 693.84

Add water charges @ 1% on

Add C.P & OH @15% on 700.78 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 80.59 Rs 80.60

Item Code: 13.67.2 Varnishing with varnish Two or more coats glue sizing with spar varnish Code 0856

DSR-12

Description MATERIALS Ordinary varnish

Details of Cost for : 10.00 Sqm Unit Quantity litre

0.70

Rate 65.00

Page 542 of 2298

0763 0858 9999 9999 0131 0115 9999 9999

Glue Superior spar varnish Carriage Repair etc LABOUR Painter (0.36+0.54=0.90) Coolie (0.36+0.54=0.90) Brushes, sand paper etc Sundries

kilog litre L.S. L.S.

0.07 1.26 1.43 2.73

65.00 125.00 1.49 1.49

Day Day L.S. L.S.

0.90 0.90 6.76 7.15

273.00 247.00 1.49 1.49 Total: 702.47

Add water charges @ 1% on

Add C.P & OH @15% on 709.49 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 81.59 Rs 81.60

Item Code: 13.68.1 French spirit polishing : Two or more coats on new works including a coat of wood filler. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 1000 Spirit litre 1.63 9999 Pigment L.S. 7.15 0999 Shellac kilog 0.24 9999 Carriage of material L.S. 2.73 9999 White woolen cloth, putty L.S. 16.12 9999 Sand paper cotton etc L.S. 13.39 9999 Lineseed oil L.S. 1.43 LABOUR 0131 Painter Day 3.50 9999 Sundries L.S. 8.06 Add water charges @ 1% on

Rate 65.00 1.49 205.00 1.49 1.49 1.49 1.49 273.00 1.49 Total: 1183.48

Add C.P & OH @15% on 1195.31 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 137.46 Rs 137.45

Item Code: 13.69.1 Polishing on wood work with ready made wax polish : New work. Code 0855 9999 0131 0115 9999 9999

DSR-12

Description MATERIALS: Wax polish (ready made) Carriage LABOUR: Painter Coolie Soap, brushes, cloth etc., Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

kilog L.S.

0.50 0.39

175.00 1.49

Day Day L.S. L.S.

0.80 0.80 4.16 7.15

Add water charges @ 1% on

273.00 247.00 1.49 1.49 Total: 520.93

Add C.P & OH @15% on

526.14

Page 543 of 2298

Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 60.51 Rs 60.50

Item Code: 13.70 Code 0855 0131 0115 9999 9999

Description MATERIALS Wax polish LABOUR Painter Coolie Acetic acid soap, cloth etc Sundries including Carriage

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

kilog

0.10

175.00

Day Day L.S. L.S.

0.40 0.40 5.33 8.06

273.00 247.00 1.49 1.49 Total: 245.45

Add water charges @ 1% on

Add C.P & OH @15% on 247.90 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 28.51 Rs 28.50

Item Code: 13.71 Code

0829 9999 0131 0115 9999 9999

Description Detail of cost for 100 letters of 15 cm height MATERIALS Paint Carriage LABOUR Painter Coolie Painting brushes, turpentine, stencil etc Sundries

Details of Cost for : 1500.00 units Unit Quantity

Rate

litre L.S.

0.56 0.91

90.00 1.49

Day Day L.S. L.S.

6.00 2.00 13.39 8.06

273.00 247.00 1.49 1.49 Total: 2215.72

Add water charges @ 1% on

Add C.P & OH @15% on 2237.88 Cost for 1500.00 units Rate per Units: Rate as per DSR-12:

Rs 1.72 Rs 1.70

Item Code: 13.72 Washed stone grit plaster on exterior walls of height upto 10 M. above level in two layers, under layer 12mm CP 1:4

Code 03.009

0155 0114 0101

DSR-12

Description MATERIALS Cement mortar 1:4 (1 cement : 4 coarse sand). Cement mortar 1:4(1 cement: 4 coarse sand). LABOUR Mason Beldar Bhisti

Details of Cost for : 10.00 Sqm Unit Quantity

Day Day Day

Rate

0.144

3485.41

0.67 0.75 0.92

287.00 247.00 260.00

Page 544 of 2298

9999 0367 2209 0114

2911 2202 0982 2203 0367 2209 0114 0101 9999 9999 0123 0114 0101 9999 0123 0115 9999

Scaffolding L.S. Applying cement slurry Cement tonne Carriage tonne Beldar Day Top layer 15 mm thick stone chipping plaster Quantity required = 0.172 cum including wastage Preparation of cement concrete mix 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size) Stone chippings 10 mm nominal size cum Carriage of Stone chipping 10 mm nominal size cum Coarse sand cum Carriage of Coarse sand cum Cement tonne Carriage of Cement tonne Beldar Day Bhisti Day Hire and running charges of mechanical mixer L.S. Sundries L.S. LABOUR Mason 1 st class Day Beldar Day Bhisti Day Scaffolding L.S. Labour for washing Mason 1st class Day Coolie Day Sundries soft brushes etc L.S.

8.97

1.49

0.02 0.02 0.25

5000.00 77.87 247.00

0.14 0.14 0.04 0.04 0.10 0.10 0.10 0.05 4.29 2.08

1050.00 87.60 1120.00 87.60 5000.00 77.87 247.00 260.00 1.49 1.49

1.75 1.75 0.30 24.44

301.00 247.00 260.00 1.49

1.00 0.50 25.22

301.00 247.00 1.49 Total: 3593.36

Add water charges @ 1% on

Add C.P & OH @15% on 3629.29 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 417.37 Rs 417.35

Item Code: 13.73.1 Forming groove on top layer of washed stone grit plaster 15 x 15 mm groove. Details of Cost for : 30.00 m Code Description Unit Quantity Second class kail wood in plank 30 x0.015 x0.015m=6.75cudmvWastage@ 10%= 0.68 Total = 7.43 cudm Assuming that the battens shall become unserviceable after using 5 times Cost for using once MATERIALS 1198 Second class kail wood in planks cum 0.00148 9999 Carriage of wood L.S. 0.39 Labour for making battens 0112 Carpenter 2nd class Day 0.15 0114 Beldar Day 0.15 9999 Sundries L.S. 2.86 Labour for nailing the battens to under layer and finishing and repairing grooves 0123 Mason 1 st class Day 0.70 0114 Beldar Day 0.70

DSR-12

Rate

25000.00 1.49 273.00 247.00 1.49

301.00 247.00

Page 545 of 2298

9999

Nails and cement mortar

L.S.

71.76

Add water charges @ 1% on

1.49 Total: 610.36

Add C.P & OH @15% on 616.46 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 23.63 Rs 23.65

Item Code: 13.73.2 Forming groove on top layer of washed stone grit plaster 20 x 15 mm groove. Details of Cost for : 30.00 m Code Description Unit Quantity Second class kail wood in plank 30 x0.02 x0.015m =9.00 cudm Wastage® 10%= 0.90 Total = 9.90 cudm Assuming that the battens shall become unserviceable after using 5 times Cost for using once MATERIALS 1198 Second class kail wood in planks cum 0.00198 9999 Carriage of wood L.S. 0.52 Labour for making battens 0112 Carpenter 2nd class Day 0.15 0114 Beldar Day 0.15 9999 Sundries L.S. 2.86 Labour for nailing the battens to under layer and finishing and repairing grooves 0123 Mason 1st class Day 0.70 0114 Beldar Day 0.70 9999 Nails and cement mortar L.S. 71.76 Add water charges @ 1% on

Rate

25000.00 1.49 273.00 247.00 1.49

301.00 247.00 1.49 Total: 623.05

Add C.P & OH @15% on 629.28 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 24.12 Rs 24.10

Item Code: 13.74 Extra for washed grit plaster above 10m for 3 m or part thereof Code 9999 0123 0114 0101 9999

Description MATERIALS Scaffolding Mason 1st class Beldar Bhisti Sundries

Details of Cost for : 10.00 Sqm Unit Quantity L.S. Day Day Day L.S.

215.28 0.30 0.30 0.15 28.60

Add water charges @ 1% on

Rate 1.49 301.00 247.00 260.00 1.49 Total: 566.78

Add C.P & OH @15% on 572.45 Cost for 10.00 Sqm

DSR-12

Page 546 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 65.83 Rs 65.85

Item Code: 13.75 Extra for washed grit plaster on circular work Code 0123 0114 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description LABOUR Mason 1st class Beldar Sundries

Day Day L.S.

0.50 0.50 53.82

Add water charges @ 1% on

Rate 301.00 247.00 1.49 Total: 354.19

Add C.P & OH @15% on 357.73 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 41.14 Rs 41.15

Item Code: 13.76 Forming groove on surface of plaster of uniform size 12x12 mm to 25x15 mm size including providing aluminium channels

Code

Details of Cost for : 30.00 m Unit Quantity

Description

Rate

MATERIALS: Aluminium channel section 15x15x2 mm weight 0.221kg/m

7306 9999 0117 0114 9999 9999

Qty = 30 + 5% wastage =31.50m @ 0.221 kg/m =6.96 kg Aluminium T or L sections Carriage of material LABOUR: FOR FIXING Assistant Fitter or 2nd class Fitter Beldar Sundries Nails and cement mortar

kilog L.S.

6.96 38.98

220.00 1.49

Day Day L.S. L.S.

0.46 0.15 2.86 71.76

273.00 247.00 1.49 1.49 Total: 1863.09

Add water charges @ 1% on

Add C.P & OH @15% on 1881.72 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 72.13 Rs 72.15

Item Code: 13.77 Extra for using white cement in top layers of washed stone grit plaster Code 0368 0367

DSR-12

Description MATERIALS (A) Add for White Cement (B) Duduct for Ordinary Cement

Details of Cost for : 10.00 Sqm Unit Quantity tonne tonne

0.10 -0.10

Rate

Add water charges @ 1% on

12000.00 5000.00 Total: 700.00

Add C.P & OH @15% on

707.00

Page 547 of 2298

Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 81.31 Rs 81.30

Item Code: 13.78 P/F applying 12 mm thick (ave) premixed formulated one coat gypsum light weight plaster. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 0868 Premixed super white gypsum plaster @ 16.14kg /sqm = kg 169.47 161.40 + 5% wastage = 161.40+8.07= 169.47 kg. LABOUR 0155 Mason Day 1.20 0115 Coolie Day 1.20 9999 Scaffolding and sundries L.S. 12.61 Add water charges @ 1% on

Rate 7.00

287.00 247.00 1.49 Total: 1845.88

Add C.P & OH @15% on 1864.34 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 214.40 Rs 214.40

Item Code: 13.79 Extra for addition of synthetic polyester triangular fibre in cement plaster/mortar.. Details of Cost for : 1.00 units Code Description Unit Quantity MATERIALS: 8733 Synthetic Polyester triangular fibre of length 6 mm, effective kg 0.125 diameter 10-40 microns an Add water charges @ 1% on

Rate 365.00 Total: 45.63

Add C.P & OH @15% on 46.09 Cost for 1.00 units Rate per Units: Rate as per DSR-12:

Rs 53.00 Rs 53.00

Item Code: 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Code 0824

9999 0122 0114

DSR-12

Description MATERIALS: Cement base wall care putty Qty : 10x0.001x1429 = 14.29 kg Add wastage 2% = 0.29 kg Total = 14.58 kg Carriage of putty LABOUR: Mason (for plaster of paris work) 1st class Beldar

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Kg

14.58

23.50

L.S.

3.90

1.49

Day Day

0.45 0.45

301.00 247.00

Page 548 of 2298

9999

Scaffoldings and Sundries

L.S.

40.00

Add water charges @ 1% on

1.49 Total: 654.64

Add C.P & OH @15% on 661.19 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 76.04 Rs 76.05

Item Code: 13.81.1 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, including applying additional coats wherever required, to achieve even shade and colour. - One coat

Code 0802 9999 9999 0131 0115 9999

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Acrylic distemper 1st quality , having VOC content less than Kg 50 gm/litre Brushes, putty etc. L.S. Sundries including carriage L.S. LABOUR: Painter Day Coolie Day Sundries L.S.

Rate

0.62

38.00

0.52 10.79

1.49 1.49

0.33 0.17 7.15

273.00 247.00 1.49 Total: 183.14

Add water charges @ 1% on

Add C.P & OH @15% on 184.97 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 21.27 Rs 21.25

Item Code: 13.81.2 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, including applying additional coats wherever required, to achieve even shade and colour. - Two coats

Code 0802 9999 9999 0131 0115 9999

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Acrylic distemper 1st quality , having VOC content less than Kg 50 gm/litre Brushes, putty etc. L.S. Sundries including carriage L.S. LABOUR: Painter Day Coolie Day Sundries L.S.

Rate

0.99

38.00

11.57 4.42

1.49 1.49

0.40 0.46 8.06

273.00 247.00 1.49 Total: 296.28

Add water charges @ 1% on

Add C.P & OH @15% on 299.24 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 34.41 Rs 34.40

Page 549 of 2298

Item Code: 13.82.1 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre -One coat

Code 0803 9999 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS: Acrylic emulsion , having VOC content less than 50 gm/litre Material for filling holes, cracks (putty) etc Carriage of material LABOUR: Painter Coolie Brushes, sand paper etc., Sundries

Rate

Ltr

0.53

200.00

L.S. L.S.

0.52 5.33

1.49 1.49

Day Day L.S. L.S.

0.36 0.36 8.06 6.76

273.00 247.00 1.49 1.49 Total: 323.99

Add water charges @ 1% on

Add C.P & OH @15% on 327.23 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 37.63 Rs 37.65

Item Code: 13.82.2 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre -Two coats

Code 0803 9999 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS: Acrylic emulsion , having VOC content less than 50 gm/litre Carriage of material Brushes, putty etc., LABOUR: Painter Coolie Brushes, sand paper etc., Sundries

Rate

Ltr

0.84

200.00

L.S. L.S.

6.76 1.43

1.49 1.49

Day Day L.S. L.S.

0.54 0.54 10.79 6.76

273.00 247.00 1.49 1.49 Total: 487.15

Add water charges @ 1% on

Add C.P & OH @15% on 492.02 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 56.58 Rs 56.60

Item Code: 13.83.1 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. - One coat Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 0804 Premium acrylic emulsion of interior grade, having VOC Ltr 0.38 350.00 content less than 50 gm/ltr. 9999 Material for filling holes, cracks (putty) etc., L.S. 0.52 1.49

DSR-12

Page 550 of 2298

9999 0131 0115 9999 9999

Carriage of material LABOUR: Painter Coolie Brushes, sand paper etc., Sundries

L.S.

5.33

1.49

Day Day L.S. L.S.

0.36 0.36 8.06 6.76

273.00 247.00 1.49 1.49 Total: 350.99

Add water charges @ 1% on

Add C.P & OH @15% on 354.50 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 40.77 Rs 40.75

Item Code: 13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. - Two coats Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 0804 Premium acrylic emulsion of interior grade, having VOC Ltr 0.60 350.00 content less than 50 gm/ltr. 9999 Material for filling holes, cracks (putty) etc., L.S. 6.76 1.49 9999 Carriage of material L.S. 1.43 1.49 LABOUR: 0131 Painter Day 0.54 273.00 0115 Coolie Day 0.54 247.00 9999 Brushes, sand paper etc., L.S. 10.79 1.49 9999 Sundries L.S. 6.76 1.49 Total: Add water charges @ 1% on 529.15 Add C.P & OH @15% on 534.44 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 61.46 Rs 61.45

Item Code: 13.84.1 Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre - One coat

Code 0805 9999 0131 0115 9999 9999 9999

DSR-12

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Synthetic enamel paint , having VOC (Volatile Organic Ltr Compound) content less than 150 gm/l Material for filling holes, cracks (putty) etc., L.S. LABOUR: Painter Day Coolie Day Putty L.S. Brushes, sand paper etc., L.S. Sundries L.S.

Rate

0.53

180.00

0.52

1.49

0.36 0.36 2.73 5.33 8.06

Add water charges @ 1% on

273.00 247.00 1.49 1.49 1.49 Total: 307.39

Add C.P & OH @15% on

310.46

Page 551 of 2298

Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 35.70 Rs 35.70

Item Code: 13.84.2 Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre - Two coats

Code 0805 9999 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description

MATERIALS: Synthetic enamel paint , having VOC (Volatile Organic Ltr Compound) content less than 150 gm/l Carriage of material L.S. Material for filling holes, cracks (putty) etc., L.S. LABOUR: Painter Day Coolie Day Brushes, sand paper etc., L.S. Sundries L.S.

Rate

0.84

180.00

1.43 5.33

1.49 1.49

0.54 0.54 6.76 8.06

273.00 247.00 1.49 1.49 Total: 464.15

Add water charges @ 1% on

Add C.P & OH @15% on 468.79 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 53.91 Rs 53.90

Item Code: 13.85.1 Applying priming coats with primer having low VOC (Volatile Organic Compound ) content. - With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Code 0806 9999 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS: Ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less Putty Carriage of material LABOUR: Painter Coolie Brushes, sand paper etc., Sundries

Rate

Ltr

0.75

103.00

L.S. L.S.

2.73 0.39

1.49 1.49

Day Day L.S. L.S.

0.25 0.25 5.33 10.79

273.00 247.00 1.49 1.49 Total: 235.92

Add water charges @ 1% on

Add C.P & OH @15% on 238.28 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 27.40 Rs 27.40

Item Code: 13.85.2

DSR-12

Page 552 of 2298

Applying priming coats with primer having low VOC (Volatile Organic Compound ) content. -With ready mixed red oxide zinc chromatic on steel /iron works having VOC content less than 250 grams/litre.

Code 0807 9999 0131 0115 9999

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Ready mixed red oxide zinc chromatic on steel/ iron work, Ltr having VOC content less than 250 Carriage of material L.S. LABOUR: Painter Day Coolie Day Brushes, sand paper etc., L.S.

Rate

0.54

125.00

0.52

1.49

0.24 0.24 10.79

273.00 247.00 1.49 Total: 209.15

Add water charges @ 1% on

Add C.P & OH @15% on 211.24 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 24.29 Rs 24.30

Item Code: 13.85.3 Applying priming coats with primer having low VOC (Volatile Organic Compound ) content. -With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Code 0808A 9999 0131 0115 9999

Description

Details of Cost for : 10.00 Sqm Unit Quantity

MATERIALS: Water thinnable cement primer for interior wall surface, Ltr having VOC content less than 50 g Carriage of material L.S. LABOUR: Painter Day Coolie Day Brushes, sand paper etc., L.S.

Rate

0.70

55.00

8.06

1.49

0.40 0.20 7.15

273.00 247.00 1.49 Total: 219.76

Add water charges @ 1% on

Add C.P & OH @15% on 221.96 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 25.53 Rs 25.55

Item Code: 14.1.1 Repairs to plaster of thickness 12mm to 20mm : With cement mortar 1:4 (1 cement : 4 fine sand) Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS: 03.004 Cement mortar 1:4 (1 cement : 4 fine sand) Cum 0.183 LABOUR : 0155 Mason (avge) Day 1.21 0115 Coolie Day 1.29 0114 Beldar Day 0.54 0101 Bhisthi Day 0.92 9999 Scaffolding and sundries L.S. 15.21

DSR-12

Rate 2971.81 287.00 247.00 247.00 260.00 1.49 Total:

Page 553 of 2298

Add water charges @ 1% on

1604.98

Add C.P & OH @15% on 1621.03 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 186.42 Rs 186.40

Item Code: 14.1.2 Repairs to plaster of 12 mm to 20 mm in patches of areas 2.50 Sqm and under : With cement mortar 1 : 4 (1 cement : 4 coarse sand). Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 03.009 Cement mortar 1:4 (1 cement : 4 coarse sand). 0.183 3485.41 (Rate as per item No 3.9) LABOUR 0155 Mason Day 1.21 287.00 0115 Coolie Day 1.29 247.00 0114 Beldar Day 0.54 247.00 0101 Bhisti Day 0.92 260.00 9999 Scaffolding and sundries L.S. 15.21 1.49 Total: Add water charges @ 1% on 1698.97 Add C.P & OH @15% on 1715.96 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 197.34 Rs 197.35

Item Code: 14.2.1 Fixing chowkhats in existing opening : Door chowkhat. Code 0295 0297 2202 0982 2203 0367 2209 0114 0115 0130 0123 0124 0128 9999 9999 9999 03.006 9999 9999 9999 0155 0114

DSR-12

Description 20 mm nominal size stone Aggregate 10 mm nominal size stone Aggregate Carriage of Stone aggregate Coarse sand Carriage of Coarse sand Cement Carriage of Cement Beldar Coolie Mistry Mason (brick layer) 1 st class Mason 2nd class Mate Scaffolding Hire and running charges of mechanical mixer Sundries Cement mortar 1:6 (1 cement : 6 fine sand) (Rate as per item no. 3.6) Cement concrete 1:2:4 filled in chase cut Painting two coats of coaltar Disposal of mulba Mason (average) Beldar

Details of Cost for : 1.00 No. Unit Quantity cum 0.021 cum 0.0072 cum 0.0282 cum 0.0141 cum 0.0141 tonne 0.0066 tonne 0.0066 Day 0.027 Day 0.0195 Day 0.0084 Day 0.0018 Day 0.0018 Day 0.0012 L.S. 1.43 L.S. 0.78 L.S. 0.39 0.01 L.S. L.S. L.S. Day Day

24.18 13.52 1.82 0.50 0.75

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87 247.00 247.00 301.00 301.00 273.00 260.00 1.49 1.49 1.49 2311.69 1.49 1.49 1.49 287.00 247.00

Page 554 of 2298

9999

Sundries

L.S.

2.73

Add water charges @ 1% on

1.49 Total: 516.67

Add C.P & OH @15% on 521.84 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 600.12 Rs 600.10

Item Code: 14.2.2 Fixing chowkhats in existing opening : Windows chowkhat. Code 0295 0297 2202 0982 2203 0367 2209 0114 0115 0130 0123 0124 0128 9999 9999 9999 03.006 9999 9999 0155 0114

Details of Cost for : 1.00 No. Unit Quantity cum 0.014 cum 0.0048 cum 0.0188 cum 0.0094 cum 0.0094 tonne 0.0044 tonne 0.0044 Day 0.018 Day 0.013 Day 0.0056 Day 0.0012 Day 0.0012 Day 0.0008 L.S. 0.91 L.S. 0.52 L.S. 0.26 0.006

Description 20 mm nominal size stone Aggregate 10 mm nominal size stone Aggregate Carriage of Stone aggregate Coarse sand Carriage of Coarse sand Cement Carriage of Cement Beldar Coolie Mistry Mason 1 st class Mason 2nd class Mate Scaffolding and sundries Hire and running charges of mechanical mixer Sundries Cement mortar 1:6 (1 cement : 6 fine sand) Rate as per item No. 3.6 Cement concrete 1:2:4 Painting two coats of coaltar Mason Beldar

L.S. L.S. Day Day

9.88 0.91 0.33 0.50

Add water charges @ 1% on

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87 247.00 247.00 301.00 301.00 273.00 260.00 1.49 1.49 1.49 2311.69 1.49 1.49 287.00 247.00 Total: 316.01

Add C.P & OH @15% on 319.17 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 367.05 Rs 367.05

Item Code: 14.2.3 Fixing chowkhats in existing opening : Clerestory windows chowkhat. Code 0295 0297 2202 0982 2203 0367 2209 0114

DSR-12

Description MATERIALS: Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Coarse sand (zone III) Carraige of Coarse sand Portland Cement Carraige of Cement Beldar

Details of Cost for : 1.00 No. Unit Quantity cum cum cum cum cum tonne tonne Day

0.007 0.0024 0.0094 0.0047 0.0047 0.0022 0.0022 0.009

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87 247.00

Page 555 of 2298

0115 0130 0123 0124 0128 9999 9999 9999 03.006 9999 9999 0155 0114 9999

Coolie Mistry Mason (brick layer) 1st class Mason (brick layer) 2nd class Mate Scaffolding and sundries Hire and running charges of mechanical mixer Sundries Cement mortar 1:6 (1 cement : 6 fine sand) (Rate as per item No. 3.6) Cement concrete 1:2:4 filled in chase cut Painting two coats of coaltar Mason (average) Beldar Sundries

Day Day Day Day Day L.S. L.S. L.S. Cum L.S. L.S. Day Day L.S.

0.0065 0.0028 0.0006 0.0006 0.0004 0.52 0.26 0.13 0.003

247.00 301.00 301.00 273.00 260.00 1.49 1.49 1.49 2311.69

8.06 0.91 0.17 0.50 2.73

1.49 1.49 287.00 247.00 1.49 Total: 230.66

Add water charges @ 1% on

Add C.P & OH @15% on 232.97 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 267.92 Rs 267.90

Item Code: 14.3 Fixing chowkhat in existing opening in brick/RCC wall with desh fasteners. Code 0114 0115 0130 0128 9999 7019 9999

Details of Cost for : 1.00 No. Unit Quantity

Description Beldar Coolie Mistry Mate Disposal of mulba Dash fastener Dash fastener / Chemical fastner

Day Day Day Day L.S. each L.S.

0.027 0.0195 0.0084 0.0012 1.82 6.00 12.22

Add water charges @ 1% on

Rate 247.00 247.00 301.00 260.00 1.49 13.00 1.49 Total: 113.25

Add C.P & OH @15% on 114.38 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 131.54 Rs 131.55

Item Code: 14.4.1 Making the opening in brick masonry including dismantling, floor, walls: For door/ window/ clerestory window.

Code

Description

Details of Cost for : 1.89 Sqm Unit Quantity

Rate

LABOUR: Details of cost for 1 opening of size 0.90 X 2.10=1.89 sqm. 03.006 9999 0124

DSR-12

Cement mortar 1:6 (1 cement : 6 fine sand) Rate as per item no. 3.6 Cement concrete 1:2:4 filled in chase cut LABOUR: Mason 2nd class

0.01

2311.69

L.S.

24.57

1.49

Day

0.50

273.00

Page 556 of 2298

0114 0115 9999

Beldar Coolie Scaffolding and Sundries

Day Day L.S.

1.20 0.40 3.50

Add water charges @ 1% on

247.00 247.00 1.49 Total: 596.65

Add C.P & OH @15% on 602.62 Cost for 1.89 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 366.67 Rs 366.65

Item Code: 14.5.1 Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm Details of Cost for : 1.00 Sqm Code Description Unit Quantity MATERIALS: 2406 Glass panes - 1.00 sqm + 10% wastate= 1.10 Sqm sqm 1.10 9999 Carriage including sundries L.S. 1.82 0863 Putty for wood work kilog 0.68 9999 Painting or varnishing or beewaxing L.S. 5.33 9999 Sundries Nails etc. L.S. 6.76 LABOUR : 0119 Glazier Day 0.23 0114 Beldar Day 0.23 9999 Sundries such as Rag, cotton etc L.S. 1.43 Add water charges @ 1% on

Rate

310.00 1.49 30.00 1.49 1.49 273.00 247.00 1.49 Total: 503.85

Add C.P & OH @15% on 508.89 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 585.22 Rs 585.20

Item Code: 14.5.2 Renewing glass panes with putty, nails : Float Glass 5.5mm thick. Code 2407 9999 0863 9999 9999 0119 0114 9999

Details of Cost for : 1.00 Sqm Unit Quantity

Description MATERIALS: Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 kg/sqm). Carriage including sundries Putty for wood work Painting or varnishing or beewaxing Sundries Nails etc. Glazier Beldar Sundries such as Rag, cotton etc

Rate

sqm

1.10

450.00

L.S. kilog L.S. L.S. Day Day L.S.

1.82 0.68 5.33 6.76 0.23 0.23 1.43

1.49 30.00 1.49 1.49 273.00 247.00 1.49 Total: 657.85

Add water charges @ 1% on

Add C.P & OH @15% on 664.43 Cost for 1.00 Sqm

DSR-12

Page 557 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 764.09 Rs 764.10

Item Code: 14.6.1 Renewing glass panes with wooden fillets :_x000D__x000D_Float Glass panes 4 mm thick._x000D_ Details of Cost for : 1.00 Sqm Code Description Unit Quantity MATERIALS 2406 Glass panes =1 sqm + 0.1 sqm (wastage @ sqm 1.10 10%)=1.10 sqm. Wooden fillets 1189 Second class teak wood in scantling cum 0.00025 1194 Second class deodar wood in planks cum 0.00025 1196 First class kail wood in planks cum 0.00025 9999 Painting or varnishing or beewaxing L.S. 4.42 9999 Sundries Nails etc. L.S. 2.73 0112 Carpenter 2nd class Day 0.20 0119 Glazier Day 0.25 0114 Beldar Day 0.45 9999 Sundries such as Rag, cotton etc L.S. 1.82 Add water charges @ 1% on

Rate 310.00

64000.00 48000.00 30000.00 1.49 1.49 273.00 273.00 247.00 1.49 Total: 623.87

Add C.P & OH @15% on 630.11 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 724.63 Rs 724.65

Item Code: 14.6.2 Renewing glass panes with wooden fillets :_x000D_ Code 2407

1189 1194 1196 9999 9999 0112 0119 0114 9999

Details of Cost for : 1.00 Sqm Unit Quantity

Description MATERIALS Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 kg/sqm). 10%)=1.10 sqm. Wooden fillets Second class teak wood in scantling Second class deodar wood in planks First class kail wood in planks Painting or varnishing or beewaxing Sundries Nails etc. Carpenter 2nd class Glazier Beldar Sundries such as Rag, cotton etc

Rate

sqm

1.10

450.00

cum cum cum L.S. L.S. Day Day Day L.S.

0.00025 0.00025 0.00025 4.42 2.73 0.20 0.25 0.45 1.82

64000.00 48000.00 30000.00 1.49 1.49 273.00 273.00 247.00 1.49 Total: 777.87

Add water charges @ 1% on

Add C.P & OH @15% on 785.65 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 903.50 Rs 903.50

Item Code: 14.7.1

DSR-12

Page 558 of 2298

Renewing glass panes with existing wooden _x000D_ Code

2406 9999 9999 9999 0119 0114 9999

Description Details of cost for 10 glasses area each 0.10 sqm. MATERIALS Glass panes = 1.00 sqm Add Wastage @ 10% = 0.l0sqm Total = 1.10 sqm Carriage of glasspanes and other materials Sundries Nails etc. Methylated spirit Glazier Beldar Sundries

Details of Cost for : 1.00 Sqm Unit Quantity

sqm L.S. L.S. L.S. Day Day L.S.

1.10 2.73 9.88 5.33 0.30 0.30 1.43

Add water charges @ 1% on

Rate

310.00 1.49 1.49 1.49 273.00 247.00 1.49 Total: 525.86

Add C.P & OH @15% on 531.12 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 610.79 Rs 610.80

Item Code: 14.7.2 Renewing glass panes with existing wooden _x000D_ Code

2407 9999 9999 9999 0119 0114 9999

Description Details of cost for 10 glasses area each 0.10 sqm. MATERIALS Glass panes = 1.00 sqm Add Wastage @ 10% = 0.1 sqm Total = 1.10 sqm Carriage of glasspanes and other materials Sundries Nails etc. Methylated spirit Glazier Beldar Sundries

Details of Cost for : 1.00 Sqm Unit Quantity

sqm L.S. L.S. L.S. Day Day L.S.

1.10 2.73 9.88 5.33 0.30 0.30 1.43

Add water charges @ 1% on

Rate

450.00 1.49 1.49 1.49 273.00 247.00 1.49 Total: 679.86

Add C.P & OH @15% on 686.66 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 789.66 Rs 789.65

Item Code: 14.8.1 S/F new wooden fillets :Ist class teak wood._x000D_ Code

1190 9999

DSR-12

Description Details of cost for 10.00 metres length MATERIALS 2nd class teak wood in planks 10.00x0.01x0.01 = 1.00 cudm Add 15% wastage = 0.15 cudm Second class teak wood in planks Nails

Details of Cost for : 10.00 m Unit Quantity

cum L.S.

0.00115 26.91

Rate

72000.00 1.49

Page 559 of 2298

0112 0114 9999

LABOUR Carpenter 2nd class Beldar Sundries

Day Day L.S.

0.25 0.25 2.73

Add water charges @ 1% on

273.00 247.00 1.49 Total: 256.97

Add C.P & OH @15% on 259.54 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 29.85 Rs 29.85

Item Code: 14.8.2 S/F new wooden fillets :Hollock wood fillets._x000D_ Code

2466 9999 0112 0114 9999

Description Details of cost for 10 metres length MATERIALS Hollock wood in scantling 10.00x0.01x0.01 = 1.00 cudm Add 15% wastage =0.15 cudm Hollock wood in scantling Nails LABOUR Carpenter 2nd class Beldar Sundries

Details of Cost for : 10.00 m Unit Quantity

Rate

cum L.S.

0.00115 26.91

31000.00 1.49

Day Day L.S.

0.25 0.25 2.73

273.00 247.00 1.49 Total: 209.82

Add water charges @ 1% on

Add C.P & OH @15% on 211.92 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 24.37 Rs 24.35

Item Code: 14.9 Renewal of old putty of glass panes._x000D_ Code

0863 9999 9999 0112 0114 9999

Description Details of cost for 13.00 metres length MATERIALS Cost of putty Nails Spirit LABOUR Carpenter 2nd class Beldar Sundries L.S.

Details of Cost for : 13.00 m Unit Quantity

Rate

kilog L.S. L.S.

0.68 7.15 2.73

30.00 1.49 1.49

Day Day L.S.

0.30 0.30 1.43

273.00 247.00 1.49 Total: 193.25

Add water charges @ 1% on

Add C.P & OH @15% on 195.18 Cost for 13.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 17.27 Rs 17.25

Page 560 of 2298

Item Code: 14.10 Refixing old glass panes with putty and nails Code 0863 9999 9999 0119 0114 9999

Description MATERIALS: Putty for wood work Spirit Nails LABOUR: Glazier Beldar Sundries

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

kilog L.S. L.S.

0.68 2.73 7.15

30.00 1.49 1.49

Day Day L.S.

0.30 0.30 1.43

273.00 247.00 1.49 Total: 193.25

Add water charges @ 1% on

Add C.P & OH @15% on 195.18 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 224.46 Rs 224.45

Item Code: 14.11 Fixing old glass with wooden fillets._x000D_ Code

0119 0114 9999 9999

Description Details of cost for 1.00 sqm LABOUR Glazier Beldar Sundries Nails

Details of Cost for : 1.00 Sqm Unit Quantity

Day Day L.S. L.S.

0.30 0.30 1.43 3.90

Add water charges @ 1% on

Rate

273.00 247.00 1.49 1.49 Total: 163.94

Add C.P & OH @15% on 165.58 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 190.42 Rs 190.40

Item Code: 14.12 P/f 16 mm M.S. Fan clamps of standard shape and_x000D_size in existing R.C.C. slab._x000D_ Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for each fan clamp. MATERIALS 1003 M.S.bar 16mm dia = 40cm (including qtl quint 0.0063 wastage) @ 1.58 Kg/m = 0.632 Kg 9999 Cement concrete 1:2:4 (1 Cement: 2 Coarse L.S. 13.52 sand : 4 graded stone aggregate 20mm nominal size) mortar for rendering or plastering 9999 Painting two or more coats to exposed portion L.S. 7.15 of the clamp including priming coat Labour for fixing 0102 Blacksmith 1st class Day 0.03

DSR-12

Rate

4000.00 1.49

1.49

301.00

Page 561 of 2298

0124 0114 9999

Mason 2nd class Beldar Sundries

Day Day L.S.

0.12 0.25 2.73

Add water charges @ 1% on

273.00 247.00 1.49 Total: 163.60

Add C.P & OH @15% on 165.24 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 190.03 Rs 190.10

Item Code: 14.13 Regrading terracing of mud phaska covered with tiles or bricks Code

0155 0114

0155

03.018 0308 03.018 0114

03.003

0155 0114 0101 9999 9999

Description Details of cost for 10.00 sqm (i) Dismantling tiles/bricks in cement mortar including removing mud plaster and cleaning the tiles/bricks LABOUR Mason (average)) Beldar (ii) Preparing the surface, for mud phuska to proper slope, relaying mud plaster gobri leeping. Mason (average)) 25mm thick mud plaster including gobri leaping MATERIALS Mud mortar Bhusa Mud mortar LABOUR Beldar Relaying of tiles / bricks including Cement Mortar 1:3 (1 cement : 3 fine sand) for grouting Cement mortar 1:3 (1 cement : 3 fine sand) (Rate as per item code 3.3) LABOUR Mason (average) Beldar Bhisti Disposal of mulba (i) Dismantling tiles/bricks in cement mortar including removing mud plaster and cleanin

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Day Day

0.54 0.54

287.00 247.00

Day

0.27

287.00

Cum quint Cum

0.24 0.084 0.12

301.12 375.00 301.12

Day

0.25

247.00

Cum

0.061

3631.93

Day Day Day L.S. L.S.

1.20 1.50 1.00 5.33 2.73

287.00 247.00 260.00 1.49 1.49

Add water charges @ 1% on

Total: 1775.96

Add C.P & OH @15% on 1793.72 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 206.28 Rs 206.30

Item Code: 14.14.1 Replacing sand stone slabs in roofing laid in CM 1: 4 CS : Red/ White sand stone slabs 30 to 50 mm thick. Details of Cost for : 10.00 Sqm

DSR-12

Page 562 of 2298

Code

0114 0115 9999 9999 1174 2216 03.009

03.003 0155 0100 0115 0101 9999 2264

Description Unit Dismantling existing stone, slabs roofing 1x10.00 sqmx0.05m = 0.50 cum. Beldar Day Coolie Day Sundries L.S. L.S. sqm Carriage of Stone slabs tonne Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate as per item No. 3.9 of SH - Mortar) Cement mortar 1:3 (1 cement :3 fine sand). Cement mortar 1:3 (1 cement : 3 fine sand) Mason Day Bandhani Day Coolie Day Bhisti Day Sundries L.S. Carriage of Rubbish cum

Quantity

Rate

0.885 0.375 4.03 40.43 11.00 1.41 0.0105

247.00 247.00 1.49 1.49 165.00 77.87 3485.41

0.0075 1.69 2.03 1.69 0.34 16.12 0.50

3631.93 287.00 260.00 247.00 260.00 1.49 87.60 Total: 3952.59

Add water charges @ 1% on

Add C.P & OH @15% on 3992.12 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 459.09 Rs 459.10

Item Code: 14.15.1 Renewing wooden battens in roofs, i/c making good the holes in wall and painting with oil type wood preserva- tive : Sal wood battens. Details of Cost for : 0.30 Cum Code Description Unit Quantity Rate Details of cost for 10 battens i.e. 300 cudm 3 metres long of 100x100mm 10x3x0.1x0.1 = 0.3cum =300cudm Add wastage @ 2%= 6 cudm, Total = 306.00 cudm MATERIALS 1199 Sal wood battens cum 0.306 50000.00 2204 Carriage of battens cum 0.306 100.11 LABOUR Taking out the existing battens and refixing new one including supporting the roof 0112 Carpenter 2nd class Day 0.50 273.00 0114 Beldar Day 2.00 247.00 9999 Disposal of mulba L.S. 5.33 1.49 9999 Making good the holes including sundries L.S. 80.73 1.49 0859 Oil type wood preservative litre 1.22 70.00 0131 Painter Day 0.183 273.00 0115 Coolie Day 0.183 247.00 9999 Carriage L.S. 0.78 1.49 9999 Brushes L.S. 5.07 1.49 9999 Sundries L.S. 4.81 1.49 Total: Add water charges @ 1% on 16285.80 Add C.P & OH @15% on 16448.66 Cost for 0.30 Cum

DSR-12

Page 563 of 2298

Rate per One Cum: Rate as per DSR-12:

Rs 63053.20 Rs 63053.20

Item Code: 14.16.1.1 Renewing wooden beams in roofs i/c making good the holes in walls & painting with oil type wood preservative : Not exceeding 4.00 metres in length : Sal wood beams. Details of Cost for : 0.30 Cum Code Description Unit Quantity Rate Details of cost for one beam i.e. 300 cudm. 0.25 x 0.30m x 4.0m (long) = 0.30 cum Add wastage @ 2% (0.006 cum) = 0.306 cum = 306 cudm Propping the roof MATERIALS 100mm diameter ballies 4m long 10 nos. 100x100mm salwood battens 1.0 metre long 5 nos.x 1.0x0.1 xO. 1 =0.05cum = 50 cudm. These materials can be used for 16 times Hence qty for one operation 1/16 = 3.125 cudm 1199 Sal wood beams cum 0.003125 50000.00 2204 Carriage of Timber cum 0.0228 100.11 LABOUR 0112 Carpenter 2nd class Day 0.25 273.00 0114 Beldar Day 0.25 247.00 (ii) Taking out the existing beams etc. LABOUR 0155 Mason (Avarage) Day 0.13 287.00 0100 Bandhani Day 0.50 260.00 0114 Beldar Day 0.33 247.00 (iii) Renewal (a) Materials and Labour 1199 Sal wood beam wrought cum 0.306 50000.00 2204 Carriage of beams cum 0.306 100.11 0112 Carpenter 2nd class Day 1.00 273.00 0100 Bandhani Day 0.50 260.00 0114 Beldar Day 1.00 247.00 Painting with oil preservative (4x1.1) +(2.0x0.25x0.30) =4.4 + 0.15 = 4.55- sqm 0859 Paint litre 0.455 70.00 0131 Painter Day 0.07 273.00 0115 Coolie Day 0.07 247.00 9999 Sundries L.S. 0.13 1.49 9999 Carriage L.S. 1.82 1.49 9999 Brushes L.S. 1.82 1.49 9999 Making good the holes L.S. 20.67 1.49 9999 Sundries L.S. 26.91 1.49 0302 SafedaBalli 125mmdia metre 2.50 37.00 Total: Add water charges @ 1% on 16755.24 Add C.P & OH @15% on 16922.79 Cost for 0.30 Cum Rate per One Cum: Rate as per DSR-12:

Rs 64870.70 Rs 64870.70

Item Code: 14.16.1.2

DSR-12

Page 564 of 2298

Renewing wooden beams in roofs i/c making good the holes in walls & painting with oil type wood preservative : Not exceeding 4.00 metres in length : Hollock wood beams. Details of Cost for : 0.30 Cum Code Description Unit Quantity Rate Details of cost for one beam i.e. 300 cudm. 0.25 x 0.30m x 4.0m (long) = 0.30 cum Add wastage @ 2% (0.006 cum) = 0.306 cum =306cudm (I) Propping the roof MATERIALS 100mm diameter bailies 4m long 10 nos. 100x100mm Hallock wood Ballens 1.0 metre long 5 nos.x 1.0x0.1x0.1 =0.05cum = 50 cudm. These materials can be used for 16 times hence qty for one operation 1/16 = 3.125 cudm 2466 Hollock wood beams cum 0.003125 31000.00 2204 Carriage of Timber cum 0.0228 100.11 LABOUR 0112 Carpenter 2nd class Day 0.25 273.00 0114 Beldar Day 0.25 247.00 (ii) Taking out the existing beams etc. (A) LABOUR 0155 Mason Day 0.13 287.00 0100 Bandhani Day 0.50 260.00 0114 Beldar Day 0.33 247.00 (iii) Renewal (a) Materials and Labour 2466 Hollock wood in scantling cum 0.306 31000.00 2204 Carriage of Timber cum 0.306 100.11 0112 Carpenter 2nd class Day 1.00 273.00 0100 Bandhani Day 0.50 260.00 0114 Beldar Day 1.00 247.00 Painting with oil preservative (4x1.1)+ (2.0x0.25x0.30) =4.4+ 0.15 =4.55 sqm 0859 Oil type wood preservative litre 0.455 70.00 0131 Painter Day 0.07 273.00 0115 Coolie Day 0.07 247.00 9999 Sundries L.S. 0.13 1.49 9999 Carriage L.S. 1.82 1.49 9999 Brushes L.S. 1.82 1.49 9999 Making good the holes L.S. 20.67 1.49 9999 Sundries L.S. 26.91 1.49 0302 Safeda Balli 125 mm dia metre 2.50 37.00 Total: Add water charges @ 1% on 10881.87 Add C.P & OH @15% on 10990.69 Cost for 0.30 Cum Rate per One Cum: Rate as per DSR-12:

Rs 42130.97 Rs 42131.00

Item Code: 14.16.2.1 Renewing wooden beams in roofs i/c making good the holes in walls & painting with oil type wood preservative : Above 4.00 m and upto 5.00 m length. Sal wood beams. Details of Cost for : 0.375 Cum Code Description Unit Quantity Rate Details of cost for one beam i.e. 375 cudm. 0.25 x 0.30m x 5.0m (long) = 0.375 cum

DSR-12

Page 565 of 2298

1199 2204 0112 0114

0155 0100 0114

1199 2204 0112 0100 0114

0859 0131 0115 9999 9999 9999 9999 9999 0302

Add wastage @ 2% (0.008 cum) = 0.383 cum =383 cudm (I) Propping the roof MATERIALS 125mm diameter ballies 5m long 12 nos 100x100mm salwood battens 1.0 metre long 6 nos. x 1.0x0.1 xO. 1 =60 cudm. These materials can be used for 16 times hence qty for one operation 1/16 = 3.75 cudm Sal wood beams Carriage of Timber LABOUR Carpenter 2nd class Beldar (ii) Taking out the existing beams etc. LABOUR Mason Bandhani Beldar (iii) Renewal Materials and Labour Sal wood in scantling Carriage of Timber Carpenter 2nd class Bandhani Beldar Painting with oil preservative (2x5x0.25)+3.0 + 2.0x0.25x0.30 = 5.5 + 0.15 = 5.65 sqm Oil type wood preservative Painter Coolie Sundries Carriage Brushes Making good the holes Sundries Safeda balli 125 mm dia

cum cum

0.00375 0.0498

50000.00 100.11

Day Day

0.25 0.25

273.00 247.00

Day Day Day

0.25 0.63 0.50

287.00 260.00 247.00

cum cum Day Day Day

0.383 0.383 1.00 1.00 2.00

50000.00 100.11 273.00 260.00 247.00

litre Day Day L.S. L.S. L.S. L.S. L.S. metre

0.565 0.08 0.08 0.26 2.34 2.21 20.67 33.15 3.75

70.00 273.00 247.00 1.49 1.49 1.49 1.49 1.49 37.00 Total: 21204.14

Add water charges @ 1% on

Add C.P & OH @15% on 21416.18 Cost for 0.375 Cum Rate per One Cum: Rate as per DSR-12:

Rs 65676.29 Rs 65676.30

Item Code: 14.16.2.2 Renewing wooden beams in roofs i/c making good the holes in walls & painting with oil type wood preservative : Above 4.00 m and upto 5.00 m length. Hollock wood beams. Details of Cost for : 0.375 Cum Code Description Unit Quantity Rate Details of cost for one beam i.e. 375 cudm. 0.25 x 0.30m x 5.0m (long) = 0.375 cum Add wastage @ 2% (0.008 cum) = 0.383 cum = 3 83 cudm (I) Propping the roof MATERIALS 125mm diameter bailies 5m long 12 nos

DSR-12

Page 566 of 2298

2466 2204 0112 0114

0155 0100 0114

2466 2204 0112 0100 0114

0859 0131 0115 9999 9999 9999 9999 9999 0302

100x100mm salwood battens 1.0 metre long 6 nos. x 1.0x0.1x0.1 = 60 cudm. These materials can be used for 16 times hence qty for one operation 1/16 = 3.75 cudm Hollock wood in scantling cum Carriage of Timber cum LABOUR Carpenter 2nd class Day Beldar Day (ii) Taking out the existing beams etc. LABOUR Mason Day Bandhani Day Beldar Day (iii) Renewal Materials and Labour Hollock wood in scantling cum Carriage of Timber cum Carpenter 2nd class Day Bandhani Day Beldar Day Painting with oil preservative (2x5xO.25)+3.O + 2.0x0.25x0.30 = 5.5 + 0.15 = 5.65 sqm Oil type wood preservative litre Painter Day Coolie Day Sundries L.S. Carriage L.S. Brushes L.S. Making good the holes L.S. Sundries L.S. Safedaballi 125 mm dia metre

0.00375 0.0375

31000.00 100.11

0.25 0.25

273.00 247.00

0.25 0.63 0.50

287.00 260.00 247.00

0.383 0.383 1.00 1.00 2.00

31000.00 100.11 273.00 260.00 247.00

0.565 0.08 0.08 0.26 2.34 2.21 20.67 33.15 3.75

70.00 273.00 247.00 1.49 1.49 1.49 1.49 1.49 37.00 Total: 13854.65

Add water charges @ 1% on

Add C.P & OH @15% on 13993.20 Cost for 0.375 Cum Rate per One Cum: Rate as per DSR-12:

Rs 42912.48 Rs 42912.50

Item Code: 14.17 Raking out joints in lime or cement mortar and_x000D_preparing the surface ._x000D_ Details of Cost for : 10.00 Sqm Code Description Unit Quantity Details of cost for 10 sqm LABOUR 0114 Beldar Day 0.53 0115 Coolie Day 0.08 0101 Bhisti Day 0.07 9999 Sundries L.S. 1.43 Add water charges @ 1% on

Rate

247.00 247.00 260.00 1.49 Total: 171.00

Add C.P & OH @15% on 172.71 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 19.86 Rs 19.85

Page 567 of 2298

Item Code: 14.18.1 Pointing with cement mortar 1 : 3 fine sand for flat tile brick on top of tile roof : Flush pointing on tile work._x000D_

Code

03.003 1213 0115 0124 0101 9999

Description Details of cost for 10.00 sqm MATERIALS Cement mortar 1:3 (1 cement : 3 fine sand) (Rate as per item No. 3.3) 2% of wt. of cement Water proofing materials LABOUR Coolie Mason 2nd class Bhisti Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.015

3631.93

kilog

0.153

25.00

Day Day Day L.S.

0.36 0.36 0.36 18.85

247.00 273.00 260.00 1.49 Total: 367.20

Add water charges @ 1% on

Add C.P & OH @15% on 370.87 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 42.65 Rs 42.65

Item Code: 14.18.2 Pointing with cement mortar 1 : 3 fine sand for flat tile brick on top of tile roof : With modular brick tiles._x000D_

Code

03.003 1213 0115 0124 0101 9999

Description Details of cost for 10.00 sqm MATERIALS Cement mortar 1:3 (1 cement : 3 fine sand) (Rate as per item No. 3.3) Water proofing material 2% of wt. of cement LABOUR Coolie Mason 2nd class Bhisti Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Cum

0.017

3631.93

kilog

0.173

25.00

Day Day Day L.S.

0.36 0.36 0.36 18.85

247.00 273.00 260.00 1.49 Total: 374.96

Add water charges @ 1% on

Add C.P & OH @15% on 378.71 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 43.55 Rs 43.55

Item Code: 14.19 Taking out wind ties from roof including cutting out rusted bolts, nuts etc._x000D_ Details of Cost for : 63.00 Kg Code Description Unit Quantity Detail of cost for 30 mtrs M.S. Flats 40x6mm @ 1.9kg./m = 30x1.9 = 57 kg.(A) J’ hook bolts @ 30cm centre to centre

DSR-12

Rate

Page 568 of 2298

0103 0100 0114

= 101 Nos. x 0.15 m = 15.15 m @ 0.40kg./m = 6.06kg Total (A+B) = 63.06 kg Say 63.00 kgs LABOUR Blacksmith 2nd class Bandhani Beldar

Day Day Day

0.09 0.06 0.16

Add water charges @ 1% on

273.00 260.00 247.00 Total: 79.69

Add C.P & OH @15% on 80.49 Cost for 63.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 1.47 Rs 1.45

Item Code: 14.20 Fixing of old wind tie with new fittings._x000D_ Code

1023 1208 1209 9999 0102 0114 9999

13.050.03

13.065.01

Description Detail of cost for 20.2 m wind tie MATERIALS G.I. - J or L hooks with nuts and bolts 8 mm dia @ 30 cm center to center = 68 nos Bitumen washer G.I. Washer (thick) Carriage of bolts, nuts and washers etc. LABOUR Blacksmith 1st class Beldar Sundries Applying priming coat with ready mixed zink chromate yellow primer 20.2x2x(0.04+0.006) = 1.86 sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Painting with ready mixed black anti corrosive bitumastic paint Painting with black anti-corrosive bitumastic paint : Two or more coats on new work.

Details of Cost for : 20.20 m Unit Quantity

Rate

10 No

68.00

90.00

100 N 100 N L.S.

68.00 68.00 1.17

25.00 32.00 1.49

Day Day L.S.

0.34 0.34 13.91

301.00 247.00 1.49

Sqm

1.86

20.72

Sqm

1.86

44.56

Add water charges @ 1% except on [A]+[B] i.e on

Total: 859.55

Add C.P & OH @15% except on [A]+[B] i.e on 868.15 Cost for 20.20 m Rate per One Metre: Rate as per DSR-12:

Rs 55.44 Rs 55.45

Item Code: 14.21 Renewing bottom rail and/or top runner of collapsible gate i/c making good all damages. Details of Cost for : 11.55 Kg Code Description Unit Quantity Detail of cost for gate of size 1.52x2.4 m (weight 11.55 kg) MATERIALS M.S. Tee 40x40x6 mm Top rail = 1.725 m–

DSR-12

Rate

Page 569 of 2298

1007 2205 15.012.02

04.002.05 03.006 9999 9999 13.050.03

0155 0114 9999

Bottom rail = 1.570 m Total = 3.295 m say 3.30 m @ 3.5 kg/m =11.55kg 11.55 kg Add 10% wastage = 1.155 kg Total = 12.705 kg = 0.1270 q say 0.13 q Carriage of Tee 12.70 kg = 0.13 q Taking out collapsible gate including frame Dismantling doors, windows & C.S. windows shutter : Of area beyond 3 sqm. Dismantling and Demolishing) Refixing of collapsible gate including mending good the demaged floor, wall etc.frame P/L CC walls, columns, string courses, coping, bed blocks, window sills etc. up to floor f Cement mortar 1:6 (1 cement : 6 fine sand) (Rate as per item No. 3.6 of SH- mater) Cement concrete 1:2:4 filled in chase cut Disposal of mulba Priming coat on Tees 0.16x3.3 = 0.53 sqm Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanise Labour for fixing the gate Mason Beldar Sundries

quint tonne

0.13 0.013

4250.00 77.87

Nos

1.00

139.86

Cum

0.03

4782.36

Cum

0.01

2311.69

L.S. L.S.

24.18 1.82

1.49 1.49

Sqm

0.53

20.72

Day Day L.S.

0.50 0.75 2.60

287.00 247.00 1.49 Total: 947.99

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 957.47 Cost for 11.55 Kg Rate per One Kg: Rate as per DSR-12:

Rs 120.81 Rs 120.25

Item Code: 14.22.1 Renewing W.I. or M.S. Wheel or roller of steel door/gate : Wheel 50 mm dia. and below._x000D_ Details of Cost for : 10.00 wheel Code Description Unit Quantity Rate Detail of cost for 10 wheels of 40 mm dia. Materials to be dismentled Weight of 10 wheels 10x[3.14x{(4/2)x(4/2)}x4]x7.850/1000 =3.94 kg Weight of 10 nos clamps 6 mm thick =10xlength of clamp =10x0.17m @ 1.90kg/m = 3.23kg Weight of 10 nos 10 mm dia. Bolts, 10 cm long 10x0.10m = lm @ 0.60 kg/m = 0.60 kg Total = 7.70 kg say 8 kg Labour for dismantling: 0103 Blacksmith 2nd class Day 0.01 273.00 0100 Bandhani Day 0.01 260.00 0114 Beldar Day 0.02 247.00 9999 Sundries L.S. 0.39 1.49 Renewing the wheels with clamps :MATERIALS 7442 10 nos wheels 40 mm dia. 40 mm wide each 10.00 60.00 10 nos clamps out of M.S. flat 40x6 mm, 170mm long = 10x0.17m = 1.70m @ 1.9 kg/m =3.23kg Add 5% wastage = 0.16 kg 1008 Total = 3.39 kg say 3.50 kg quint 0.035 4200.00

DSR-12

Page 570 of 2298

1034 1215

0102 0100 0114

13.050.03 9999

M.S. bolt/pin 10 mm dia 10 cm long 10 nos quint 10x0.06 = 0.6 kg = 0.006 q Welding charges (electrical) length = cm 10x(2x4) = 80cm Labour for cutting, assembling and errection charges; Blacksmith 1st class Day Bandhani Day Beldar Day Priming coat: = 10x2(0.06+0.008)x0.25m = 0.34 sqm Tees 0.16x3.3 = 0.53 sqm Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise Sundries L.S.

0.006

5400.00

80.00

1.50

0.03 0.02 0.11

301.00 260.00 247.00

0.165

20.72

1.69

1.49 Total: 954.17

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 963.71 Cost for 10.00 wheel Rate per Per Wheel: Rate as per DSR-12:

Rs 111.17 Rs 111.15

Item Code: 14.22.2 Renewing W.I. or M.S. Wheel or roller of steel door/gate : Wheel above 50 mm dia._x000D_ Details of Cost for : 10.00 wheel Code Description Unit Quantity Rate Detail of cost for 10 wheels Considering average wheel dia =75 mm Width of wheel =40 mm M.S. flat for clamp = 60x8 mm Bolt size 16 mm dia. Lenth of one clamp : 2x(0.04+0.0375+0.02)+0.05 =0.195+0.05=0.245m say 0.25m Materials to be dismentled Weight of 10 nos wheels 10x[3.14x{(7.5/2)x(7.5/2)}x4]x7.850/1000 = 13.87 kg Weight of 10 nos clamps 8 mm thick = 10x0.25 m @ 3.8kg/m = 9.50 kg Weight of 10 nos 16 mm dia. Bolts, 10 cm long 10x0.10 m @ 1.60 kg/m = 1.60 kg Total = 24.97 kg say 25 kg Labour for dismantling: 0103 Blacksmith 2nd class Day 0.04 273.00 0100 Bandhani Day 0.03 260.00 0114 Beldar Day 0.06 247.00 9999 Sundries L.S. 1.04 1.49 Renewing the wheels with clamps :MATERIALS 7442 10 nos wheels 75 mm dia. 40 mm wide each 10.00 60.00 10 nos clamps out of M.S. flat 60x8 mm = 10x0.25 m @ 3.8 kg/m = 9.5 kg Add 5% wastage = 0.48 kg 1008 Total = 9.48 kg say 10 kg quint 0.10 4200.00 1034 M.S. bolt/pin 16 mm dia 10 cm long 10 nos quint 0.016 5400.00 10x0.16= 1.6 kg = 0.016 q 1215 Welding charges (electrical) lenth = 10x(2x6) cm 120.00 1.50

DSR-12

Page 571 of 2298

0102 0100 0114

13.050.03 9999

Labour for cutting, assembling and errection charges; Blacksmith 1st class Day Bandhani Day Beldar Day Priming coat: = 10x2(0.06+0.008)x0.25m = 0.34 sqm Tees 0.16x3.3 = 0.53 sqm Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise Sundries L.S.

0.10 0.05 0.36

301.00 260.00 247.00

0.34

20.72

5.33

1.49 Total: 1461.45

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1476.06 Cost for 10.00 wheel Rate per Per Wheel: Rate as per DSR-12:

Rs 170.45 Rs 170.45

Item Code: 14.23 Pumping out watger caused by springs, tidal/river seepage, broken water mains or drains and the like.

Code

0011 0114

Description Details for 10.91 Kiloletre Pumping hours 3 hrs. or 0.375 days Cost of pumping water with 4000 Iitres per hour capacity pump Beldar for clearing slush

Details of Cost for : 10.91 kLtr Unit Quantity

Rate

Day

0.375

500.00

Day

2.00

247.00 Total: 681.50

Add water charges @ 1% on

Add C.P & OH @15% on 688.32 Cost for 10.91 kLtr Rate per One K-litr: Rate as per DSR-12:

Rs 72.55 Rs 72.55

Item Code: 14.24 Mud mortar made with local clay and good earth Code

0811 0114 0101 9999

Description Detail of cost for one cum MATERIALS Mud (dry) LABOUR Beldar Bhisti Sundries

Details of Cost for : 1.00 Cum Unit Quantity

Rate

cum

1.08

50.00

Day Day L.S.

0.63 0.315 6.45

247.00 260.00 1.49 Total: 301.12

Add water charges @ 1% on

Add C.P & OH @15% on 304.13 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 349.75 (including CP &OH) Rs 301.10

Page 572 of 2298

Item Code: 14.25 Brick work with bricks of class designation 7.5 in mud mortar. Code 2602 03.018 2201 9999 0123 0124 0115 0101

Details of Cost for : 1.00 Cum Unit Quantity

Description

MATERIALS : Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Mud mortar Cum Carriage of bricks 1000 Sundries L.S. LABOUR: Mason 1st Class Day Mason Ilnd Class Day Coolie Day Bhishti Day

Rate

494.00

2900.00

0.25 494.00 2.73

301.12 233.60 1.49

0.36 0.36 1.37 0.20

301.00 273.00 247.00 260.00 Total: 2224.38

Add water charges @ 1% on

Add C.P & OH @15% on 2246.62 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 2583.61 Rs 2583.60

Item Code: 14.26.1.1 P/F 25 mm thick shutters for cup board etc. : Panelled or panelled and glazed shutters : Superior class teak wood

Code

1186 2204 2406 0608 0639

DSR-12

Description Details of cost for shutter of cup-board 200xl08cm = 2.16 sqm. MATERIALS: Styles4x200x8.0x2.5cm = 0.016 cum+ RailsTop rail1x110.5x8.0x2.5cm = 0.0022 cum+ Lock and bottom rails 2x110.5x8.0x2.5 cm = 0.0044 Panels 2x48x41x1.6cm = 0.006 cum+ Sash bars2x114x3.8x2.5cm = 0.003cum+ 6x48x3.8x2.5cm = 0.003 cum+ Beading16x92x1.4x1.2cm = 0.002cum Total = 0.0366 Add for wastage @ 10% = 0.0037 cum. Grand Total = 0.0403 cum. Superior class teak wood such as Dandeli, Balarshah or Malabar in planks Carriage of timber Glasses 10kg/sqm 4mm thick FittingsNickel plated mild steel piano hinges 1 mm thick 35 mm wide Screws 25 mm LABOUR-

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

cum

0.04

105000.00

cum sqm

0.04 0.99

100.11 310.00

metre

4.00

35.00

100 N

120.00

30.00

Page 573 of 2298

0111 0119 0114 9999

Carpenter I class Glazier Beldar Sundries

Day Day Day L.S.

2.40 0.18 0.77 40.43

Add water charges @ 1% on

301.00 273.00 247.00 1.49 Total: 5708.87

Add C.P & OH @15% on 5765.96 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3069.84 Rs 3069.85

Item Code: 14.26.1.2 P/F 25 mm thick shutters for cup board etc. : Panelled or panelled and glazed shutters : Ist class teak wood_x000D_

Code

1188 2204 2406 0608 0639 0111 0119 0114 9999

Description Details of cost for shutters of a cup-board (half glazed and half panelled) 200xl08cm = 2.16 sqm. Materials: Styles4x200x8.0x2.5cm = 0.016 cum+ RailsTop rail1x110.5x8.0x2.5cm = 0.0022cum+ Lock and bottom rail2x110.5x8.0x2.5cm = 0.0044 cum. Panels2x48x41xl.6cm = 0.006cum+ Sash bars2x114x3.8x2.5cm = 0.003cum+ 6x48x3.8x2.5cm = 0.003 cum+ Beading16x92x 1.4x 1.2cm = 0.002cum Total = 0.0366 Add for wastage @ 10% = 0.0037 cum. Grand Total = 0.0403 cum. First class teak wood in planks Carriage of timber Glasses lOkg/sqm 4mm thick FittingsNickle plated bright finished M.S. Piano hinges Screws 25mm LabourCarpenter I class Glazier Beldar Sundries

Details of Cost for : 2.16 Sqm Unit Quantity

Rate

cum cum sqm

0.04 0.04 0.99

80000.00 100.11 310.00

metre

4.00

35.00

100 N

120.00

30.00

2.40 0.18 0.77 40.43

301.00 273.00 247.00 1.49 Total: 4708.87

Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 4755.96 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 2532.11 Rs 2532.10

Page 574 of 2298

Item Code: 14.26.2.1 P/F 25 mm thick shutters for cup board etc. : Glazed shutters : Superior class teak wood_x000D_ Details of Cost for : 2.16 Sqm Code Description Unit Quantity Rate Details of cost for shutter of cup-board 200x108cm = 2.16 sqm. MATERIALS : (i) Teak wood first class Styles : 4x200x9.5x2.5 cm = 0.019 cum Rails Top & intermediate rails 2x110.5x9.5x2.5 cm = 0.006 cum Lock and bottom rails 2x110.5x19.7x2.5 cm = 0.011 cum Beadings2x186.lxl.9xl.2cm = 0.001cum+ 4x 171.70x 1.9x 1.2cm = 0.002cum. Total = 0.039 cum. Add for wastage @ 10% = 0.004 cum. Grand Total = 0.043 cum. 1186 Superior class teak wood such as Dandeli, cum 0.043 105000.00 Balarshah or Malabar in planks 2406 (ii) Glasses (lOkg/sqm) 4.0mm thick sqm 1.27 310.00 0608 (iii) Piano hinges-75x45x3.2 mm metre 4.00 35.00 0639 (iv)M.S. screws 25 mm 100 N 120.00 30.00 0597 M.S. butt hinges50x37x 1.50 mm 10 No 2.00 45.00 0640 M.S. screws 20 mm 100 N 8.00 25.00 2204 (v) Carriage of timber cum 0.043 100.11 LABOUR: 0156 Carpenter (Avg.) Day 1.83 287.00 0119 Glazier Day 0.23 273.00 0114 Beldar Day 0.77 247.00 9999 Sundries L.S. 40.43 1.49 Total: Add water charges @ 1% on 5938.43 Add C.P & OH @15% on 5997.81 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3193.28 Rs 3193.30

Item Code: 14.26.2.2 P/F 25 mm thick shutters for cup board etc. :Glazed shutters : Ist class teak wood_x000D_ Details of Cost for : 2.16 Sqm Code Description Unit Quantity Details of cost for shutter of cup-board 200x108cm = 2.16 sqm. MATERIALS : (i) Teak wood first class Styles : 4x200x9.5x2.5 cm = 0.019 cum Rails Top & intermediate rails 2x110.5x9.5x2.5 cm = 0.006 cum Lock and bottom rails 2x110.5x19.7x2.5 cm = 0.011 cum Beadings-

DSR-12

Rate

Page 575 of 2298

1188 2406 0608 0639 0597 0640 2204 0156 0119 0114 9999

2x186. lxl.9x1.2cm = 0.001cum+ 4xl71.70xl.9xl.2cm = 0.002cum. Total = 0.039 cum. Add for wastage @ 10% = 0.004 cum. Grand Total = 0.043 cum. First class teak wood in planks (ii) Glasses (lOkg/sqm) 4.0mm thick (iii) Piano hinges-75x45x3.2 mm (iv)M.S. screws 25 mm M.S. butt hinges50x37xl .50 mm M.S. screws 20 mm (v) Carriage of timber LABOUR: Carpenter (Avg.) Glazier Beldar Sundries

cum sqm metre 100 N 10 No 100 N cum Day Day Day L.S.

0.043 1.27 4.00 120.00 2.00 8.00 0.043

80000.00 310.00 35.00 30.00 45.00 25.00 100.11

1.83 0.23 0.77 40.43

287.00 273.00 247.00 1.49 Total: 4863.43

Add water charges @ 1% on

Add C.P & OH @15% on 4912.06 Cost for 2.16 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2615.22 Rs 2615.20

Item Code: 14.27.1 P/F plain jaffri door & window shutters i/c bright or/& black enamelled M.S. butt hinges : Second class teak wood.

Code

1190 2204 09.041.01 0595 0597 0637 0640

0112

Description Details of cost of a jaffri shutter 176x86 cm = 1.51sqm MATERIALS Teak wood 2nd class Styles 2x176x7.5x3.5 cm = 0.0092 cum Rails 3x86x7.5x3.5 = 0.0068 cum Total 0.0160 cum Add wastage @ 10 % =0.0016 cum Total = 0.0176 cum Say 18 cudm Second class teak wood in planks Carriage of timber Plain Jaffri work P/F plain jaffri of 35 x 10 mm laths placed 35mm apart(frames to be paid separately) Iron hinges 100x58x 1.9 mm Iron hinges 50x37x1.5 mm Screws 40 mm Screws 20 mm LABOUR (For making frame and fixing fitting) Carpenter 2nd class

Details of Cost for : 1.51 Sqm Unit Quantity

Rate

cum cum

0.018 0.018

72000.00 100.11

Sqm

1.51

1589.10

6.00 2.00 48.00 8.00

80.00 45.00 50.00 25.00

0.30

273.00 Total: 1462.70

10 No 10 No 100 N 100 N

Day

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1477.33 Cost for 1.51 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 2714.22 Rs 2714.20

Page 576 of 2298

Item Code: 14.28.1 P/F curtain rods of 1.25 mm thick brass plates_x000D_ Code

0444 0446 9999 9999

09.032 9999 9999

Details of Cost for : 2.00 m Description Unit Quantity Detail of cost for 2 m long MATERIALS Brass curtain rod 20 mm dia metre 2.00 Brass bracket each 2.00 Screws L.S. 2.73 Carriage L.S. 1.56 Wooden plugs including cutting brick work and fixing in cement mortar Providing 50x50x50mm 2nd class teak wood plugs fixing in Nos 2.00 CM 1:3 Labour L.S. 2.73 Sundries L.S. 1.56 Add water charges @ 1% except on [A] i.e on

Rate

100.00 40.00 1.49 1.49

17.42 1.49 1.49 Total: 292.78

Add C.P & OH @15% except on [A] i.e on 295.71 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 187.46 Rs 187.45

Item Code: 14.28.2 P/F curtain rods of 1.25 mm thick brass plates with two brass brackets : 25 mm diametre._x000D_ Details of Cost for : 2.00 m Code Description Unit Quantity Detail of cost for 2 m long MATERIALS 0445 Brass curtain rod 25 mm dia metre 2.00 0446 Brass bracket each 2.00 9999 Screws L.S. 2.73 9999 Carriage L.S. 1.56 Wooden plugs including cutting brick work and fixing in cement mortar 09.032 Providing 50x50x50mm 2nd class teak wood plugs fixing in Nos 2.00 CM 1:3 9999 Labour L.S. 2.73 9999 Sundries L.S. 1.56 Add water charges @ 1% except on [A] i.e on

Rate

120.00 40.00 1.49 1.49

17.42 1.49 1.49 Total: 332.78

Add C.P & OH @15% except on [A] i.e on 336.11 Cost for 2.00 m Rate per One Metre: Rate as per DSR-12:

Rs 210.69 Rs 210.65

Item Code: 14.29 P/F M.S. round or square bars with M.S. flats at_x000D_required spacings in wooden frames of windows &_x000D_clerestory windows._x000D_ Details of Cost for : 33.67 Kg Code Description Unit Quantity Rate Details of cost for window -140x110cm

DSR-12

Page 577 of 2298

1003

1008 2205 9999 0103 0112 0114

MATERIALS: M.S. bar 16 mm dia 13x136 cm = 17.68 m @ 1.57 kg/m = 27.93 kg Add for wastage @ 10% =2.79 kg Total = 30.72 kg or 0.307 q M.S. bar M.S. flat 40x6mm 2x96cm = 192cm+ 1x110cm = 110cm = 302cm+ Add wastage @ 10% = 30cm Total = 332cm.@ 1.90 kg/m = 6.31 kg Say 0.063 quintal M.S. flat Carriage of steel (0.307+0.063 = 0.37 q = 0.037t Sundries LABOURBlacksmith 2nd class Carpenter 2nd class Beldar

quint

0.307

4000.00

quint tonne L.S.

0.063 0.037 26.91

4200.00 77.87 1.49

0.35 0.20 0.45

273.00 273.00 247.00 Total: 1796.88

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 1814.85 Cost for 33.67 Kg Rate per One Kg: Rate as per DSR-12:

Rs 61.99 Rs 62.00

Item Code: 14.30.1 Providing joists (karries) including hoisting fixing in position : Sal wood. Code

1199 2204 0112 0114 0100 13.057.01 9999

Details of Cost for : 0.30 Cum Description Unit Quantity Details of cost for 300cudm. or 0.30cum MATERIALSSal wood 10x30xl0x30cm = 0.30 cum. or = 300 cudm.+ Add wastage @ 2% = 6.00 cudm. Total = 306 cudm. Sal wood cum 0.306 Carriage of timber cum 0.306 LABOURCarpenter 2nd class Day 0.70 Beldar Day 1.45 Bandhani Day 0.70 Priming coat (Wood preservative) Painting with oil type wood preservative : New work (two or Sqm 0.80 more coats). Sundries L.S. 26.91 Add water charges @ 1% except on [A] i.e on

Rate

50000.00 100.11 273.00 247.00 260.00 18.68 1.49 Total: 16101.98

Add C.P & OH @15% except on [A] i.e on 16263.00 Cost for 0.30 Cum Rate per One Cum: Rate as per DSR-12:

Rs 62391.30 Rs 62391.40

Item Code: 14.30.2

DSR-12

Page 578 of 2298

Providing joists (karries) including hoisting fixing in position : Hollock wood._x000D_ Details of Cost for : 0.30 Cum Code Description Unit Quantity Details of cost for 300cudm. or 0.30 cum MATERIALSHollock wood in scantling 10x30xl0x30cm = 0.30 cum. or = 300 cudm.+ Add wastage @ 2% = 6.00 cudm. Total = 306 cudm. 2466 Hollock wood in scantling cum 0.306 2204 Carriage of timber cum 0.306 LABOUR0112 Carpenter 2nd class Day 0.70 0114 Beldar Day 1.45 0100 Bandhani Day 0.70 Priming coat (Wood preservative) 13.057.01 Painting with oil type wood preservative : New work (two or Sqm 0.80 more coats). 9999 Sundries L.S. 26.91 Add water charges @ 1% except on [A] i.e on

Rate

31000.00 100.11 273.00 247.00 260.00 18.68 1.49 Total: 10287.98

Add C.P & OH @15% except on [A] i.e on 10390.86 Cost for 0.30 Cum Rate per One Cum: Rate as per DSR-12:

Rs 39881.43 Rs 39881.50

Item Code: 14.31.1 P/F bright finished brass single acting spring hinges: 150 mm._x000D_ Code

0389 0449 9999 0111 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSBrass spring hinges 150 mm Brass screws 50 mm Carriage of materials LABOURCarpenter 1st class Beldar

each 100 N L.S. Day Day

Rate

10.00 80.00 3.64

300.00 200.00 1.49

0.40 0.20

301.00 247.00 Total: 3335.22

Add water charges @ 1% on

Add C.P & OH @15% on 3368.57 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 387.39 Rs 387.40

Item Code: 14.31.2 P/F bright finished brass single acting spring hinges: 125 mm._x000D_ Code

0390 0449 9999

DSR-12

Description Details of cost for 10 nos. MATERIALSBrass spring hinges 125 mm Brass screws 50mm Carriage of materials

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S.

10.00 80.00 3.64

Rate

250.00 200.00 1.49

Page 579 of 2298

0111 0114

LABOURCarpenter 1st class Beldar

Day Day

0.40 0.20

Add water charges @ 1% on

301.00 247.00 Total: 2835.22

Add C.P & OH @15% on 2863.57 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 329.31 Rs 329.30

Item Code: 14.31.3 P/F bright finished brass single acting spring hinges: 100 mm. Code

0391 0450 9999 0111 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSBrass spring hinges 100 mm Brass screws 40 mm Carriage of materials LABOURCarpenter 1st class Beldar

each 100 N L.S. Day Day

Rate

10.00 80.00 3.64

150.00 160.00 1.49

0.40 0.20

301.00 247.00 Total: 1803.22

Add water charges @ 1% on

Add C.P & OH @15% on 1821.25 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 209.44 Rs 209.45

Item Code: 14.32.1 P/F bright finished brass double acting spring hinges: 150 mm._x000D_ Code

0392 0449 9999 0111 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSBrass double acting spring hinges 150 mm Brass screws 50 mm Carriage of materials LABOURCarpenter 1st class Beldar

each 100 N L.S. Day Day

Rate

10.00 80.00 3.64

500.00 200.00 1.49

0.40 0.20

301.00 247.00 Total: 5335.22

Add water charges @ 1% on

Add C.P & OH @15% on 5388.57 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 619.69 Rs 619.70

Item Code: 14.32.2 P/F bright finished brass double acting spring hinges: 125 mm._x000D_ Details of Cost for : 10.00 Nos

DSR-12

Page 580 of 2298

Code

0393 0449 9999 0111 0114

Description Details of cost for 10 nos. MATERIALSBrass double acting spring hinges 125 mm Brass screws 50 mm Carriage of materials LABOURCarpenter 1st class Beldar

Unit

each 100 N L.S. Day Day

Quantity

Rate

10.00 80.00 3.64

350.00 200.00 1.49

0.40 0.20

301.00 247.00 Total: 3835.22

Add water charges @ 1% on

Add C.P & OH @15% on 3873.57 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 445.46 Rs 445.45

Item Code: 14.32.3 P/F bright finished brass double acting spring hinges: 100 mm._x000D_ Code

0394 0450 9999 0111 0114

Description Details of cost for 10 nos. MATERIALSBrass double acting spring hinges 100 mm Brass screws 40 mm Carriage of materials L.S. LABOURCarpenter 1st class Beldar

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day Day

Rate

10.00 80.00 3.64

300.00 160.00 1.49

0.40 0.20

301.00 247.00 Total: 3303.22

Add water charges @ 1% on

Add C.P & OH @15% on 3336.25 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 383.67 Rs 383.65

Item Code: 14.33.1 P/F bright finished brass bolts : 250 mm._x000D_ Code

0404 0452 9999 0111

Description Details of cost for 10 nos. MATERIALSBrass flush bolt 250 mm Brass screws 25 mm Carriage of materials LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 60.00 3.64

140.00 95.00 1.49

0.20

301.00 Total: 1522.62

Add water charges @ 1% on

Add C.P & OH @15% on 1537.85 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 176.85 Rs 176.85

Page 581 of 2298

Item Code: 14.33.2 P/F bright finished brass bolts : 150 mm._x000D_ Code

0405 0452 9999 0111

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSBrass flush bolt 150 mm Brass screws 25 mm Carriage of materials LABOURCarpenter 1st class

each 100 N L.S. Day

Rate

10.00 60.00 2.73

120.00 95.00 1.49

0.17

301.00 Total: 1312.24

Add water charges @ 1% on

Add C.P & OH @15% on 1325.36 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 152.42 Rs 152.40

Item Code: 14.33.3 P/F bright finished brass bolts : 100 mm. Code

0406 0452 9999 0111

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSBrass flush bolt 100 mm Brass screws 25 mm Carriage of materials LABOURCarpenter 1st class

each 100 N L.S. Day

Rate

10.00 60.00 2.73

85.00 95.00 1.49

0.17

301.00 Total: 962.24

Add water charges @ 1% on

Add C.P & OH @15% on 971.86 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 111.76 Rs 111.75

Item Code: 14.34 P/F 150 mm bright finished floor brass door stopper with rubber cushion. Code

0417 0450 9999 0111 9999

DSR-12

Description Details of cost for 10 nos. MATERIALSBrass door stopper 150 mm Brass screws 40 mm Carriage of material LABOURCarpenter 1st class Sundries (wooden plugs including fixing in the floor)

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S.

Rate

10.00 40.00 2.73

160.00 160.00 1.49

0.07 6.37

Add water charges @ 1% on

301.00 1.49 Total: 1698.63

Add C.P & OH @15% on

1715.62

Day L.S.

Page 582 of 2298

Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 197.30 Rs 197.30

Item Code: 14.35.1 P/F bright finished brass hard drawn hooks and eyes : 300 mm. Code

0418 9999 0111

Description Details of cost for 10 nos. MATERIALSBright finished brass hooks & eyes 300 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

10 No L.S. Day

Rate

10.00 0.91

700.00 1.49

0.06

301.00 Total: 719.42

Add water charges @ 1% on

Add C.P & OH @15% on 726.61 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 83.56 Rs 83.55

Item Code: 14.35.2 P/F bright finished brass hard drawn hooks and eyes : 250 mm. Code

0419 9999 0111

Description Details of cost for 10 nos. MATERIALSBright finished brass hooks & eyes 250 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

10 No L.S. Day

Rate

10.00 0.91

675.00 1.49

0.06

301.00 Total: 694.42

Add water charges @ 1% on

Add C.P & OH @15% on 701.36 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 80.66 Rs 80.65

Item Code: 14.35.3 P/F bright finished brass hard drawn hooks and eyes : 200 mm. Code

0420 9999 0111

DSR-12

Description Details of cost for 10 nos. MATERIALSBright finished brass hooks & eyes 200 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

10 No L.S.

Rate

10.00 0.91

625.00 1.49

0.06

Add water charges @ 1% on

301.00 Total: 644.42

Add C.P & OH @15% on

650.86

Day

Page 583 of 2298

Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 74.85 Rs 74.85

Item Code: 14.35.4 P/F bright finished brass hard drawn hooks and eyes : 150 mm. Code

0421 9999 0111

Description Details of cost for 10 nos. MATERIALSBright finished brass hooks & eyes 150 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

10 No L.S. Day

Rate

10.00 0.91

600.00 1.49

0.06

301.00 Total: 619.42

Add water charges @ 1% on

Add C.P & OH @15% on 625.61 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 71.95 Rs 71.95

Item Code: 14.35.5 P/F bright finished brass hard drawn hooks and eyes : 100 mm. Code

0422 9999 0111

Description Details of cost for 10 nos. MATERIALSBright finished brass hooks & eyes 100 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

10 No L.S. Day

Rate

10.00 0.91

500.00 1.49

0.06

301.00 Total: 519.42

Add water charges @ 1% on

Add C.P & OH @15% on 524.61 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 60.33 Rs 60.35

Item Code: 14.36 P/F bright finished brass fan light pivot. Code

0429 0450 9999 0111

Description Details of cost for 10 nos. MATERIALSBrass fan light pivot Brass screws 40 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

10 No 100 N L.S. Day

10.00 40.00 0.91

190.00 160.00 1.49

0.08

301.00 Total: 279.44

Add water charges @ 1% on

DSR-12

Rate

Page 584 of 2298

Add C.P & OH @15% on 282.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 32.46 Rs 32.45

Item Code: 14.37 P/F 300 mm long bright fini- shed brass chain with hook for fan light. Code

0430 0452 9999 0111

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 nos. MATERIALSBrass chain with hook 300 mm long Brass screws 25 mm Carriage of material LABOURCarpenter 1st class

each 100 N L.S. Day

Rate

10.00 40.00 0.91

30.00 95.00 1.49

0.10

301.00 Total: 369.46

Add water charges @ 1% on

Add C.P & OH @15% on 373.15 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 42.91 Rs 42.90

Item Code: 14.38 P/F bright finished brass quadrant stay 300 mm long with necessary screws. Code

0427 0452 9999 0111

Description Details of cost for 10 nos. MATERIALSBrass quadrant stay 300 mm long Brass screws 25 mm Carriage of material LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N L.S. Day

Rate

10.00 40.00 0.91

120.00 95.00 1.49

0.10

301.00 Total: 1269.46

Add water charges @ 1% on

Add C.P & OH @15% on 1282.15 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 147.45 Rs 147.45

Item Code: 14.39 P/F bright finished brass helical door spring (superior quality). Code

0442 0449 0452 0111

DSR-12

Description Details of cost for 10 nos. MATERIALSHelical door spring (superior quality) 150 mm Brass screws 50 mm Brass screws 25 mm LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos Unit Quantity

each 100 N 100 N Day

Rate

10.00 40.00 20.00

300.00 200.00 95.00

0.40

301.00

Page 585 of 2298

0114

Beldar

Day

0.20

Add water charges @ 1% on

247.00 Total: 3268.80

Add C.P & OH @15% on 3301.49 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 379.67 Rs 379.65

Item Code: 14.40.1 P/F chromium plated brass butt hinges with necessary screws: 125 x 70 x 4 mm (Ordinary type). Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0525 Brass butt hinges (chromium plated) 10 No 10.00 125x70x4 mm (ordinary type) 0585 Brass screws 50 mm 100 N 100.00 9999 Carriage of material L.S. 3.64 LABOUR0111 Carpenter 1 st class Day 0.14 0114 Beldar Day 0.10 Add water charges @ 1% on

Rate

810.00 230.00 1.49 301.00 247.00 Total: 1112.26

Add C.P & OH @15% on 1123.38 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 129.19 Rs 129.20

Item Code: 14.40.2 P/F chromium plated brass butt hinges with necessary screws: 100 x 70 x 4 mm (ordinary type). Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0526 Brass butt hinges (chromium plated) 10 No 10.00 100x70x4 mm (ordinary type) 0586 Brass screws 40 mm 100 N 80.00 9999 Carriage of material L.S. 3.64 LABOUR0111 Carpenter 1st class Day 0.14 0114 Beldar Day 0.10 Add water charges @ 1% on

Rate

675.00 190.00 1.49 301.00 247.00 Total: 899.26

Add C.P & OH @15% on 908.25 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 104.45 Rs 104.45

Item Code: 14.40.3 P/F chromium plated brass butt hinges with necessary screws: 75 x 65 x 4 mm (heavy type). Details of Cost for : 10.00 Nos

DSR-12

Page 586 of 2298

Code

0524 0587 9999 0111 0114

Description Details of cost for 10 nos. MATERIALSBrass butt hinges (chromium plated) 75x65x4 mm (heavy type) Brass screws 30 mm Carriage of material L.S. LABOURCarpenter 1st class Beldar

Unit

Quantity

Rate

10 No

10.00

950.00

100 N L.S.

60.00 1.82

150.00 1.49

0.14 0.10

301.00 247.00 Total: 1109.55

Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 1120.65 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 128.88 Rs 128.90

Item Code: 14.40.4 P/F chromium plated brass butt hinges with necessary screws: 75 x 40 x 2.5 mm (ordinary type). Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0527 Brass butt hinges (chromium plated) 10 No 10.00 75x40x2.5 mm (ordinary type) 0587 Brass screws 30 mm 100 N 60.00 9999 Carriage of material L.S. 1.82 LABOUR0111 Carpenter 1st class Day 0.14 0114 Beldar Day 0.10 Add water charges @ 1% on

Rate

425.00 150.00 1.49 301.00 247.00 Total: 584.55

Add C.P & OH @15% on 590.40 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 67.90 Rs 67.90

Item Code: 14.40.5 P/F chromium plated brass butt hinges with necessary screws: 50 x 40 x 2.5 mm (ordinary type). Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 nos. MATERIALS0528 Brass butt hinges (chromium plated) 10 No 10.00 50x40x2.5 mm (ordinary type) 0589 Brass screws 20 mm 100 N 40.00 9999 Carriage of material L.S. 0.91 LABOUR0111 Carpenter 1st class Day 0.08 Add water charges @ 1% on

Rate

185.00 100.00 1.49 301.00 Total: 250.44

Add C.P & OH @15% on 252.94 Cost for 10.00 Nos

DSR-12

Page 587 of 2298

Rate per Each: Rate as per DSR-12:

Rs 29.09 Rs 29.10

Item Code: 14.41 P/F 85 x 42 mm chromium plated brass pull bolt lock. Code

2467 9999 0112

Description Details of cost for 10 nos MATERIALSChromium plated brass pull bolt lock including bolts, nuts & washers Carriage of materials & sundries LABOURCarpenter 2nd class

Details of Cost for : 10.00 Nos Unit Quantity

Rate

each

10.00

145.00

L.S.

6.37

1.49

Day

0.25

273.00 Total: 1527.74

Add water charges @ 1% on

Add C.P & OH @15% on 1543.02 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 177.45 Rs 177.45

Item Code: 14.42.1 Code

0775 9999 0141 0115 9999 9999

Description Detail of cost for 10 sqm MATERIALSDehradun white lime Carriage of lime LABOURWhite Washer Coolie Indigo gum etc Sundries ladders etc

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

quint L.S.

0.02 0.52

410.00 1.49

Day Day L.S. L.S.

0.11 0.06 2.73 2.73

260.00 247.00 1.49 1.49 Total: 60.53

Add water charges @ 1% on

Add C.P & OH @15% on 61.14 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 7.03 Rs 7.05

Item Code: 14.42.2 Code

0775 9999 0141 0115 9999 9999

DSR-12

Description Detail of cost for 10 sqm MATERIALSDehradun white lime Carriage of lime LABOURWhite Washer Coolie Indigo gum etc Sundries ladders etc

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

quint L.S.

0.01 0.52

410.00 1.49

Day Day L.S. L.S.

0.07 0.03 2.08 2.73

260.00 247.00 1.49 1.49

Page 588 of 2298

Add water charges @ 1% on

Total: 37.65

Add C.P & OH @15% on 38.03 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 4.37 Rs 4.35

Item Code: 14.43 Code 0114 0115 0101 9999 9999

Description LABOUR : Beldar Coolie Bhisthi Sundries such as sand paper and scraper Repairs to scratches

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day L.S. L.S.

0.09 0.04 0.04 2.73 1.82

Add water charges @ 1% on

Rate 247.00 247.00 260.00 1.49 1.49 Total: 49.29

Add C.P & OH @15% on 49.78 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 5.73 Rs 5.70

Item Code: 14.44 Code

0815 9999 9999 0131 0115 9999

Description Details of cost for 10 sqm. MATERIALSDry distemper Carriage of distemper Brushes, sand-paper etc. LABOURPainter Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

kilog L.S. L.S.

1.00 0.91 5.33

35.00 1.49 1.49

Day Day L.S.

0.33 0.17 4.42

273.00 247.00 1.49 Total: 182.97

Add water charges @ 1% on

Add C.P & OH @15% on 184.80 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 21.25 Rs 21.25

Item Code: 14.45.1 Oil bound distemper : On old work ( one or more coats ). Code 0816 9999 9999

DSR-12

Description MATERIALS : Oil bound washable distemper/ Acrylic distemper Brushes, putty etc., Sundries including carriage LABOUR:

Details of Cost for : 10.00 Sqm Unit Quantity kilog L.S. L.S.

1.00 0.52 10.79

Rate 42.00 1.49 1.49

Page 589 of 2298

0131 0115 9999

Painter Coolie Sundries

Day Day L.S.

0.33 0.17 7.15

Add water charges @ 1% on

273.00 247.00 1.49 Total: 201.58

Add C.P & OH @15% on 203.60 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 23.41 Rs 23.40

Item Code: 14.46 Removing dry or oil bound distemper. Code

Description

0114 0115 0101 9999

LABOUR : Beldar Coolie Bhisthi Scrapper, sand paper etc.

9999

Sundries including mortar to repair the surface

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

Day Day Day

0.11 0.05 0.05

247.00 247.00 260.00

L.S.

6.24

1.49

L.S.

1.82

1.49 Total: 64.53

Add water charges @ 1% on

Add C.P & OH @15% on 65.18 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 7.50 Rs 7.50

Item Code: 14.47.1 Painting on G.S. sheet with synthetic enamel paint : Old work (one or more coats). Details of Cost for : 10.00 Sqm Code Description Unit Quantity Details of cost for 10 sqm. MATERIALS0845 Roofing paint litre 0.46 9999 Carriage L.S. 0.52 LABOUR0131 Painter Day 0.36 0115 Coolie Day 0.36 9999 Putty, brushes sand paper etc. L.S. 6.67 9999 Sundries L.S. 8.06 Add water charges @ 1% on

Rate

110.00 1.49 273.00 247.00 1.49 1.49 Total: 260.52

Add C.P & OH @15% on 263.13 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 30.26 Rs 30.30

Item Code: 14.48.1

DSR-12

Page 590 of 2298

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint : 75 mm diameter pipes. Details of Cost for : 30.00 m Code Description Unit Quantity Rate Detail of cost for 30 mtrs Area=22/7 x0.0814 x30m =7.67sqm MATERIALS 4202 Zinc chromate red oxide primer litre 0.41 68.00 9999 Carriage L.S. 0.39 1.49 LABOUR 0131 Painter Day 0.18 273.00 0115 Coolie Day 0.18 247.00 9999 Brushes, sand paper etc L.S. 8.19 1.49 MATERIALS 0828 Anticorrosive bituminous paint (black) litre 0.73 85.00 9999 Carriage L.S. 1.04 1.49 LABOUR 0131 Painter Day 0.41 273.00 0115 Coolie Day 0.41 247.00 9999 Putty, sand paper etc L.S. 4.16 1.49 9999 Sundries L.S. 6.24 1.49 9999 Wire brushes for cleaning L.S. 4.42 1.49 9999 Extra for delays L.S. 40.30 1.49 Total: Add water charges @ 1% on 493.20 Add C.P & OH @15% on 498.13 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 19.10 Rs 19.10

Item Code: 14.49.1 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint : 75 mm diameter pipes. Details of Cost for : 30.00 m Code Description Unit Quantity Rate Detail of cost for 30 mtrs Area=22/7 x0.0814x30m =7.67sqm MATERIALS 0828 Anticorrosive bituminous paint (black) litre 0.43 85.00 9999 Carriage L.S. 0.39 1.49 LABOUR 0131 Painter Day 0.27 273.00 0115 Coolie Day 0.27 247.00 9999 Putty, sand paper etc L.S. 4.16 1.49 9999 Sundries L.S. 6.24 1.49 9999 Wire brushes for cleaning L.S. 4.42 1.49 9999 Extra for delays L.S. 26.91 1.49 Total: Add water charges @ 1% on 239.72 Add C.P & OH @15% on 242.12 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 9.28 Rs 9.30

Page 591 of 2298

Item Code: 14.49.2 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint - 100 mm diameter pipes Details of Cost for : 30.00 m Code Description Unit Quantity Rate Area = 22/7 x 106.4 mm x 30m = 10.032 sqm MATERIALS: 0828 Anticorrosive bituminous paint (black) litre 0.57 85.00 9999 Carriage L.S. 0.52 1.49 LABOUR: 0131 Painter Day 0.36 273.00 0115 Coolie Day 0.36 247.00 9999 Putty , sand paper etc., L.S. 5.33 1.49 9999 Sundries L.S. 8.06 1.49 9999 Wire brushes for cleaning L.S. 5.33 1.49 9999 Extra for delay L.S. 34.06 1.49 Total: Add water charges @ 1% on 315.06 Add C.P & OH @15% on 318.21 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 12.20 Rs 12.20

Item Code: 14.49.3 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint - 150 mm diameter pipes Details of Cost for : 30.00 m Code Description Unit Quantity Rate Area = 22/7 x 157.2 mm x 30m = 14.82 sqm MATERIALS: 0828 Anticorrosive bituminous paint (black) litre 0.85 85.00 9999 Carriage L.S. 0.65 1.49 LABOUR: 0131 Painter Day 0.53 273.00 0115 Coolie Day 0.53 247.00 9999 Putty , sand paper etc., L.S. 8.06 1.49 9999 Sundries L.S. 11.96 1.49 9999 Wire brushes for cleaning L.S. 7.14 1.49 9999 Extra for delay L.S. 40.30 1.49 Total: Add water charges @ 1% on 449.34 Add C.P & OH @15% on 453.83 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 17.40 Rs 17.40

Item Code: 14.50.1 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with, aluminium paint : - 75mm dia pipes

Code

Description

Details of Cost for : 30.00 m Unit Quantity

Rate

Detail of cost for 30 mtrs Area =22/7x0.0814x30=7.67sqm MATERIALS

DSR-12

Page 592 of 2298

4202 9999 0131 0115 9999 0826 9999 9999 0131 0115 9999 9999 9999

Red oxide Zinc chromate primer Carriage LABOUR Painter Coolie Sundries MATERIALS Aluminium paint Carriage Putty, sand paper etc LABOUR Painter Coolie Sundries Wire brushes for cleaning Extra for delays

litre L.S.

0.41 0.39

68.00 1.49

Day Day L.S.

0.18 0.18 8.19

273.00 247.00 1.49

litre L.S. L.S.

0.61 1.04 4.16

115.00 1.49 1.49

Day Day L.S. L.S. L.S.

0.41 0.41 5.20 9.10 44.85

273.00 247.00 1.49 1.49 1.49 Total: 513.50

Add water charges @ 1% on

Add C.P & OH @15% on 518.64 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 19.88 Rs 19.90

Item Code: 14.50.2 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with, aluminium paint : - 100mm dia pipes

Code

4202 9999 0131 0115 9999 0826 9999 9999

0131 0115 9999 9999 9999

Description Detail of cost for 30 mtrs Area =22/7x106.4mm x30= 10.032sqm MATERIALS Red oxide Zinc chromate primer Carriage LABOUR Painter 0.18 x 10.032 / 7.67 Coolie Sundries MATERIALS Aluminium paint 0.61 x 10.032 / 7.67 Carriage Putty, sand paper etc LABOUR LABOUR: Painter Coolie 0.41 x 10.032 / 7.67 = 0.54 Sundries Wire brushes for cleaning Extra for delays

Details of Cost for : 30.00 m Unit Quantity

Rate

litre L.S.

0.54 0.52

68.00 1.49

Day

0.24

273.00

Day L.S.

0.24 10.79

247.00 1.49

litre

1.16

115.00

L.S. L.S.

1.43 5.33

1.49 1.49

Day Day

0.54 0.54

273.00 247.00

L.S. L.S. L.S.

6.76 11.96 66.43

1.49 1.49 1.49 Total: 729.51

Add water charges @ 1% on

Add C.P & OH @15% on 736.81 Cost for 30.00 m

DSR-12

Page 593 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 28.24 Rs 28.25

Item Code: 14.50.3 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with, aluminium paint : - 150mm dia pipes

Code

4202 9999 0131 0115 9999 0826 9999 9999 0131 0115 9999 9999 9999

Description Detail of cost for 30 mtrs Area =22/7x0.0814x30=7.67sqm MATERIALS Red oxide Zinc chromate primer Carriage LABOUR Painter Coolie Sundries MATERIALS Aluminium paint Carriage Putty, sand paper etc LABOUR Painter Coolie Sundries Wire brushes for cleaning Extra for delays

Details of Cost for : 30.00 m Unit Quantity

Rate

litre L.S.

0.80 0.65

68.00 1.49

Day Day L.S.

0.36 0.36 15.99

273.00 247.00 1.49

litre L.S. L.S.

1.72 2.08 7.93

115.00 1.49 1.49

Day Day L.S. L.S. L.S.

0.80 0.80 10.01 17.81 101.40

273.00 247.00 1.49 1.49 1.49 Total: 1087.66

Add water charges @ 1% on

Add C.P & OH @15% on 1098.54 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 42.11 Rs 42.10

Item Code: 14.51.1 Painting on rain water, soil, waste and vent pipes and fittings with synthetic paint on old work : 75 mm dia. pipe .

Code

0826 9999 9999 0131 0115 9999 9999 9999 9999

DSR-12

Description Details of cost for 30 metres Area = 22/7x81.4 mmx30 m = 7.67 sqm MATERIALSAluminium paint Putty, sand paper etc. Carriage LABOUR Painter Coolie Putty, sand paper brushes etc. Sundries Wire brushes for cleaning Extra for delay

Details of Cost for : 30.00 Nos Unit Quantity

Rate

litre L.S. L.S.

0.35 0.39 2.08

115.00 1.49 1.49

Day Day L.S. L.S. L.S. L.S.

0.28 0.28 4.16 6.24 4.42 26.91

Add water charges @ 1% on

273.00 247.00 1.49 1.49 1.49 1.49 Total: 251.72

Add C.P & OH @15% on

254.24

Page 594 of 2298

Cost for 30.00 Nos Rate per Each: Rate as per DSR-12:

Rs 9.75 Rs 9.75

Item Code: 14.51.2 Painting on rain water, soil, waste and vent pipes and fittings with synthetic paint on old work : 100 mm dia. pipe.

Code

0826 9999 9999 0131 0115 9999 9999 9999 9999

Description Details of cost for 30 metres Area = 22/7x106.4 mmx30 m = 10.032 sqm MATERIALSAluminium paint Putty, sand paper etc. Carriage LABOUR Painter Coolie Putty, sand paper brushes etc. Sundries Wire brushes for cleaning Extra for delay

Details of Cost for : 30.00 m Unit Quantity

Rate

litre L.S. L.S.

0.46 0.52 2.73

115.00 1.49 1.49

Day Day L.S. L.S. L.S. L.S.

0.36 0.36 5.33 8.06 5.33 34.06

273.00 247.00 1.49 1.49 1.49 1.49 Total: 323.58

Add water charges @ 1% on

Add C.P & OH @15% on 326.82 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 12.53 Rs 12.55

Item Code: 14.51.3 Painting on rain water, soil, waste and vent pipes and fittings with synthetic paint on old work : 150 mm dia. pipe.

Code

0826 9999 9999 0131 0115 9999 9999 9999 9999

Description Details of cost for 30 metres Area = 22/7x157.2 mmx30 m = 14.82 sqm MATERIALSAluminium paint Putty, sand paper etc. Carriage LABOUR Painter Coolie Putty, sand paper brushes etc. Sundries Wire brushes for cleaning Extra for delay

Details of Cost for : 30.00 m Unit Quantity

Rate

litre L.S. L.S.

0.68 0.65 3.90

115.00 1.49 1.49

Day Day L.S. L.S. L.S. L.S.

0.53 0.53 7.93 11.96 7.15 40.30

273.00 247.00 1.49 1.49 1.49 1.49 Total: 460.92

Add water charges @ 1% on

Add C.P & OH @15% on 465.53 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 17.85 Rs 17.85

Page 595 of 2298

Item Code: 14.52.1 Painting with oil type wood preservative : Old work (one or more coats). Code

0859 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description Details of cost for 10 sqm MATERIALS Oil type wood preservative Carriage of material LABOUR Painter Coolie Brushes etc Sundries

Rate

litre L.S.

0.81 0.52

70.00 1.49

Day Day L.S. L.S.

0.11 0.11 2.73 2.73

273.00 247.00 1.49 1.49 Total: 122.81

Add water charges @ 1% on

Add C.P & OH @15% on 124.04 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 14.27 Rs 14.25

Item Code: 14.53.1 Wall painting with plastic emulsion pait : On old work . Code

0835 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description Details of cost for 10’sqm MATERIALS Plastic emulsion paint Materials for filling in holes and cracks (putty etc) Carriage of material L.S. LABOUR Painter Coolie Brushes, sand paper etc L.S. Sundries

litre

Rate

L.S.

0.73 0.00 5.33

165.00 0.00 1.49

Day Day L.S. L.S.

0.36 0.36 8.06 6.76

273.00 247.00 1.49 1.49 Total: 337.67

Add water charges @ 1% on

Add C.P & OH @15% on 341.05 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 39.22 Rs 39.30

Item Code: 14.54.1 Painting with synthetic enamel paint - : One or more coats on old work. Code

DSR-12

Description

0833 9999

MATERIALS: Synthetic enamel paint - black / chocolate color. Carraige of paint and materials

0131 0115

LABOUR: Painter Coolie

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre

0.70

130.00

L.S.

0.52

1.49

Day Day

0.36 0.36

273.00 247.00

Page 596 of 2298

9999 9999

Putty Brushes and sand paper

9999

Sundries

L.S.

2.73

1.49

L.S. L.S.

5.33 8.06

1.49 1.49 Total: 302.99

Add water charges @ 1% on

Add C.P & OH @15% on 306.02 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 35.19 Rs 35.20

Item Code: 14.55.1 Painting with aluminium : On old work . Code 0826 9999 9999 0131 0115 9999 9999

Description MATERIALS Aluminium paint Carriage of paint and material Putty etc LABOUR Painter Coolie Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S. L.S.

0.46 0.52 2.73

115.00 1.49 1.49

Day Day L.S. L.S.

0.36 0.36 5.33 8.06

273.00 247.00 1.49 1.49 Total: 264.89

Add water charges @ 1% on

Add C.P & OH @15% on 267.54 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 30.77 Rs 30.75

Item Code: 14.56.1 Painting acid proof paint : On old work . Code 0827 9999 9999 0131 0115 9999 9999

Description MATERIALS Acid proof paint Carriage of paint Putty etc LABOUR Painter Coolie Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S. L.S.

0.70 0.52 2.73

105.00 1.49 1.49

Day Day L.S. L.S.

0.36 0.36 5.33 8.06

273.00 247.00 1.49 1.49 Total: 285.49

Add water charges @ 1% on

Add C.P & OH @15% on 288.34 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 33.16 Rs 33.15

Page 597 of 2298

Item Code: 14.57.1 Painting with black anti- corrosive bitumastic paint : One or more coats on old work. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 0828 Black anticorrosive bitumastic paint litre 0.57 9999 Carriage L.S. 0.52 LABOUR 0131 Painter Day 0.36 0115 Coolie Day 0.36 9999 Putty, brushes, sand paper etc L.S. 5.33 9999 Sundries L.S. 8.06 Add water charges @ 1% on

Rate 85.00 1.49 273.00 247.00 1.49 1.49 Total: 256.37

Add C.P & OH @15% on 258.93 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 29.78 Rs 29.80

Item Code: 14.58.1 French spirit Polishing : On old work. Code 1000 0999 9999 9999 9999 0131 9999

Description MATERIALSSpirit Shellac Carriage of materials Turpentine oil sand paper cotton/woolen cloth putty etc. Linseed oil LABOUR Painter Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre kilog L.S. L.S.

0.98 0.13 0.91 10.79

65.00 205.00 1.49 1.49

L.S.

0.52

1.49

Day L.S.

1.76 8.06

273.00 1.49 Total: 601.05

Add water charges @ 1% on

Add C.P & OH @15% on 607.06 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 69.81 Rs 69.80

Item Code: 14.59.1 Polishing on wood work with ready made wax polish : Old work. Code 0855 9999 0131 0115 9999 9999

Description MATERIALS Ready made Wax polish Carriage L.S. LABOUR Painter Coolie Soap, brushes, cloth etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity kilog L.S.

0.25 0.39

175.00 1.49

Day Day L.S. L.S.

0.40 0.40 4.16 4.42

273.00 247.00 1.49 1.49 Total: 265.12

Add water charges @ 1% on

DSR-12

Rate

Page 598 of 2298

Add C.P & OH @15% on 267.77 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 30.79 Rs 30.80

Item Code: 14.60 Re-lettering with black Japan paint. Code

0829

0131 0115 9999 9999

Description Detail of cost for 100 letters of 15 cm height MATERIALS Paint (Black Japan) Carriage LABOUR Painter Coolie Painting brushes, turpentine, stencil etc Sundires

Details of Cost for : 1500.00 units Unit Quantity

Rate

litre

0.37 0.52

90.00 0.00

Day Day L.S. L.S.

4.00 1.00 7.15 8.06

273.00 247.00 1.49 1.49 Total: 1394.96

Add water charges @ 1% on

Add C.P & OH @15% on 1408.91 Cost for 1500.00 units Rate per Units: Rate as per DSR-12:

Rs 1.08 Rs 1.10

Item Code: 14.61 Painting (one or more coats) with black Japan paint. Code 0829 9999 9999 0131 0115 9999 9999

Description MATERIALSBlack Japan Paint Carriage Putty etc. LABOUR Painter Coolie Brushes, sand paper etc. Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S. L.S.

0.70 0.52 2.73

90.00 1.49 1.49

Day Day L.S. L.S.

0.36 0.36 5.33 8.06

273.00 247.00 1.49 1.49 Total: 274.99

Add water charges @ 1% on

Add C.P & OH @15% on 277.74 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 31.94 Rs 31.95

Item Code: 14.62.1 P/F CP brass chain and rubber plug complete for sink or wash basin : 32 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity Detail of cost for one no. MATERIALS-

DSR-12

Rate

Page 599 of 2298

1314 9999

C.P. brass chain with 32 mm dia rubber plug Carriage of materials and fixing charges

each L.S.

1.00 8.06

Add water charges @ 1% on

26.00 1.49 Total: 38.01

Add C.P & OH @15% on 38.39 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 44.15 Rs 44.15

Item Code: 14.62.2 P/F CP brass chain and rubber plug complete for sink or wash basin : 40 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS1315 C.P. brass chain with 40 mm dia rubber plug each 1.00 9999 Carriage of materials and fixing charges L.S. 8.06 Add water charges @ 1% on

Rate 27.00 1.49 Total: 39.01

Add C.P & OH @15% on 39.40 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 45.31 Rs 45.30

Item Code: 14.63.1 Distempering with Ist quality acrylic distemper (ready made) of approved manufacturer: One or more coats on old work.

Code 0816 9999 9999 0131 0114 9999

Description MATERIALS Oil bound washable distemper/ Acrylic distemper Brushes, putty etc Sundries including carriage of material LABOUR Painter Beldar Sundires

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

kilog L.S. L.S.

1.00 0.52 10.76

42.00 1.49 1.49

Day Day L.S.

0.22 0.22 7.15

273.00 247.00 1.49 Total: 183.85

Add water charges @ 1% on

Add C.P & OH @15% on 185.69 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 21.35 Rs 21.35

Item Code: 14.64.1 Finishing walls with water proofing cement paint : Old work (one or more coats applied @ 2.20Kg/10Sqm) over & i/c primer @ 0.8l/10 Sqm. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 0851 Water proofing cement paint kilog 2.20 40.00 8508 Primer for cement paint litre 0.80 63.00

DSR-12

Page 600 of 2298

9999 0131 0115 0101 9999 9999

Carriage of material LABOUR Painter Coolie Bhisti Brushes, sand paper etc Sundries

L.S.

1.56

1.49

Day Day Day L.S. L.S.

0.46 0.23 0.05 7.15 8.06

273.00 247.00 260.00 1.49 1.49 Total: 358.77

Add water charges @ 1% on

Add C.P & OH @15% on 362.36 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 41.67 Rs 41.65

Item Code: 14.64.2 Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete

Code 0851 9999 0131 0115 0101 9999 9999

Description MATERIALS: Water proofing cement paint Carriage LABOUR: Painter Coolie Bhisti Brushes, Sand paper etc., Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

kilog L.S.

2.20 1.10

40.00 1.49

Day Day Day L.S. L.S.

0.35 0.12 0.05 3.15 8.06

273.00 247.00 260.00 1.49 1.49 Total: 244.53

Add water charges @ 1% on

Add C.P & OH @15% on 246.98 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 28.40 Rs 28.40

Item Code: 14.65.1 Finishing walls with exterior paint: Old work (two or more coats on existing cement paint surface applied @ 3.28 Kg/10 Sqm).

Code 8507 9999 0131 0115 9999 9999

Description MATERIALS Textured exterior paint Carriage of material LABOUR Painter Coolie Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S.

3.28 1.56

198.00 1.49

Day Day L.S. L.S.

0.46 0.23 7.15 8.06

273.00 247.00 1.49 1.49 Total: 856.81

Add water charges @ 1% on

Add C.P & OH @15% on 865.38 Cost for 10.00 Sqm

DSR-12

Page 601 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 99.52 Rs 99.50

Item Code: 14.65.2 Finishing walls with exterior paint: Old work (one or more coats) applied @ 1.82 Ltr./10 Sqm). Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIALS 8507 Textured exterior paint litre 1.82 9999 Carriage of material L.S. 0.52 LABOUR 0131 Painter Day 0.33 0115 Coolie Day 0.17 9999 Brushes, sand paper etc L.S. 7.15 9999 Sundries L.S. 8.06 Add water charges @ 1% on

Rate 198.00 1.49 273.00 247.00 1.49 1.49 Total: 515.87

Add C.P & OH @15% on 521.03 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 59.92 Rs 59.90

Item Code: 14.66.1 Finishing walls with Acrylic smooth exterior paint : old work (Two or more coats applied @ 1.67 Ltr/10Sqm) on existing cement paint surface. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 8505 Acrylic exterior paint litre 1.67 130.00 9999 Carriage of material L.S. 0.91 1.49 LABOUR 0131 Painter Day 0.46 273.00 0115 Coolie Day 0.23 247.00 9999 Brushes, sand paper etc L.S. 4.81 1.49 9999 Sundries L.S. 5.33 1.49 Total: Add water charges @ 1% on 415.96 Add C.P & OH @15% on 420.12 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 48.31 Rs 48.30

Item Code: 14.66.2 Finishing walls with Acrylic smooth exterior paint : Old work (one or more coats) applied @ 0.90 Ltr./10 Sqm).

Code 8505 9999 0131 0115

DSR-12

Description MATERIALS Acrylic exterior paint Carriage of material LABOUR Painter Coolie

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S.

0.90 0.52

130.00 1.49

Day Day

0.33 0.17

273.00 247.00

Page 602 of 2298

9999 9999

Brushes, sand paper etc Sundries

L.S. L.S.

7.15 8.06

Add water charges @ 1% on

1.49 1.49 Total: 272.51

Add C.P & OH @15% on 275.24 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 31.65 Rs 31.65

Item Code: 14.67.1 Finishing walls with Premium Acrylic Smooth Silicone additives: old work (one or more coats applied @ 1.43 Ltr/10Sqm) on existing cement paint surface. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 8506 Premium Acrylic exterior paint litre 1.43 230.00 9999 Carriage of material L.S. 1.04 1.49 LABOUR 0131 Painter Day 0.46 273.00 0115 Coolie Day 0.23 247.00 9999 Brushes, sand paper etc L.S. 7.15 1.49 9999 Sundries L.S. 8.06 1.49 Total: Add water charges @ 1% on 535.50 Add C.P & OH @15% on 540.86 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 62.20 Rs 62.20

Item Code: 14.67.2 Finishing walls with Premium Acrylic Smooth Silicone additives: Old work (one or more coats) applied @ 0.83 Ltr./10 Sqm).

Code 8506 9999 0131 0115 9999 9999

Description MATERIALS Premium Acrylic exterior paint Carriage of material LABOUR Painter Coolie Brushes, sand paper etc Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S.

0.83 0.91

230.00 1.49

Day Day L.S. L.S.

0.33 0.17 7.15 8.06

273.00 247.00 1.49 1.49 Total: 347.00

Add water charges @ 1% on

Add C.P & OH @15% on 350.47 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 40.30 Rs 40.30

Item Code: 14.69.1 Varnishing with varnish: One or more coats with copal varnish.

DSR-12

Page 603 of 2298

Code 0857 9999 9999 0131 0115 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS Superior copal varnish Carriage Repair to the surface LABOUR Painter Coolie Brushes, sand Sundries

Rate

litre L.S. L.S.

0.70 0.52 2.73

125.00 1.49 1.49

Day Day L.S. L.S.

0.36 0.36 5.33 2.73

273.00 247.00 1.49 1.49 Total: 291.55

Add water charges @ 1% on

Add C.P & OH @15% on 294.47 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 33.86 Rs 33.85

Item Code: 14.69.2 Varnishing with varnish: One or more coats with spar varnish. Code 0858 9999 9999 0131 0114 9999 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIALS Superior spar varnish Carriage Repair etc LABOUR Painter Coolie Brushes, sand paper etc Sundries

Rate

litre L.S. L.S.

0.75 0.52 2.73

125.00 1.49 1.49

Day Day L.S. L.S.

0.36 0.36 2.73 4.16

273.00 247.00 1.49 1.49 Total: 296.06

Add water charges @ 1% on

Add C.P & OH @15% on 299.02 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 34.39 Rs 34.40

Item Code: 14.70 Melamine polishing on wood work (one or more coats). Code

7241 0006 9999 0131 0115 9999

Description Details of cost for 10sqm MATERIALS Melamine polish Hire charges of Spraying machine including electric charges Carriage charge of Machine & Marerial LABOUR Painter Beldar Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

litre Day

0.65 0.78

250.00 250.00

L.S.

4.42

1.49

Day Day L.S.

0.35 0.35 4.42

273.00 247.00 1.49 Total: 552.68

Add water charges @ 1% on

DSR-12

Rate

Page 604 of 2298

Add C.P & OH @15% on 558.21 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 64.19 Rs 64.20

Item Code: 14.71 Varnishing with flatting varnish one or more coats on old work. Code 0856 9999 9999 9999 0131 0115

Description MATERIALS Flatting varnish Glue, putty etc Carriage Painting brushes, turpentine, stencil etc LABOUR Painter Coolie

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S. L.S. L.S.

0.70 2.73 1.82 24.18

65.00 1.49 1.49 1.49

Day Day

0.36 0.36

273.00 247.00 Total: 275.51

Add water charges @ 1% on

Add C.P & OH @15% on 278.27 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 32.00 Rs 32.00

Item Code: 14.72 P/F double sacffolding system (cuplock type)on the exterior side, upto seven story height made with 40 mm dia. MS tube 1.50 m c/c horizontal and vertical tubes joining with cup and lock system.

Code 14.72X

2205 0116 0114 9999

Details of Cost for : 202.50 Sqm Description Unit Quantity Rate Details of Cost for Area : 22.5m x 9.0m = 202.50 Sqm Cost of scaffolding materials for using once in the item code Nos 1.00 7820.65 14.72 40mm dia MS pipe = 3765.42 kg 25mm box spigot = 123.98 kg Nuts and bolts = 37.80 kg Clamps 120Nos @ 1 kg/each =120kg Challies 90 Nos @ 15 kg/ each =1350 kg cuplocks 1314 Nos @ 0.5 kg/each = 657 kg Total = 6054.20 kg Say 6.054 MT

Carraige of Steel Fitter (grade 1) Beldar Sundries

tonne Day Day L.S.

6.054 15.50 31.00 1035.00

Add water charges @ 1% on

77.87 301.00 247.00 1.49 Total: 22156.72

Add C.P & OH @15% on 22378.29 Cost for 202.50 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 127.09 Rs 127.10

Page 605 of 2298

Item Code: 14.73 Providing and fixing bright finished brass casement window fasteners or peg stays to windows/ ventilators with necessary welding and machine screws etc. complete. Details of Cost for : 2.00 Kg Code Description Unit Quantity Rate Details of Cost for te (10 x 0.20 = 2.00 kg) 0423 Brass casement window fastener Each 10.00 45.00 9999 Fixing charges including welding and materials etc., L.S. 125.58 1.49 9999 Carriage of materials L.S. 3.64 1.49 Total: Add water charges @ 1% on 642.53 Add C.P & OH @15% on 648.96 Cost for 2.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 373.15 Rs 373.15

Item Code: 14.74 Providing and fixing 14 mm bright finished brass spring catch to steel centre hung ventilators with necessary welding and machine screws etc Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate MATERIALS: 0428 Brass fanlight catch 10 No 10.00 170.00 9999 Fixing charge including welding and materials etc., L.S. 125.58 1.49 9999 Carriage of material L.S. 3.64 1.49 Total: Add water charges @ 1% on 362.53 Add C.P & OH @15% on 366.16 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 42.11 Rs 42.10

Item Code: 15.1 Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

0.44 0.37 1.04

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 201.62

Add C.P & OH @15% on 203.64 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 234.19 Rs 234.20

Item Code: 15.2.1 Demolishing cement concrete: 1 : 3 : 6 or richer. Details of Cost for : 1.00 Cum

DSR-12

Page 606 of 2298

Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Unit

Quantity

Rate

Day Day L.S.

1.59 0.72 4.81

247.00 247.00 1.49 Total: 577.74

Add water charges @ 1% on

Add C.P & OH @15% on 583.52 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 671.05 Rs 671.05

Item Code: 15.2.2 Demolishing cement concrete: 1 : 4 : 8 or leaner. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

0.88 0.55 1.95

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 356.12

Add C.P & OH @15% on 359.68 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 413.63 Rs 413.65

Item Code: 15.3 Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

2.65 0.72 7.02

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 842.85

Add C.P & OH @15% on 851.28 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 978.97 Rs 978.95

Item Code: 15.4 Demolishing R.B. work i/c stacking of steel bars. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

2.12 0.90 4.68

Add water charges @ 1% on

DSR-12

Rate 247.00 247.00 1.49 Total: 752.91

Page 607 of 2298

Add C.P & OH @15% on 760.44 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 874.51 Rs 874.50

Item Code: 15.5 Extra for cutting reinforce- ment bars in RCC or R.B work. Code

0103 0114 9999

Description R.C.C. or R.B. workReinforced area considering 1% reinforcement = 0.01 sqm LABOUR For cutting 0.01 sqm reinforcement Blacksmith 2nd class Beldar Sundries

Details of Cost for : 1.00 Sqm Unit Quantity

Day Day L.S.

0.50 0.50 13.39

Add water charges @ 1% on

Rate

273.00 247.00 1.49 Total: 279.95

Add C.P & OH @15% on 282.75 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 325.16 Rs 325.15

Item Code: 15.6 Extra for screpping reinfor- cement. Code

0103 0114 9999

Description Detail of cost for 10 Nos 6 metres long 16 mm dia bars @ 1.58 kg/metre Total weight = 94.80 kg = 0.948 quintal LABOUR Blacksmith 2nd class Beldar Sundries

Details of Cost for : 94.80 Kg Unit Quantity

Day Day L.S.

0.25 0.50 13.39

Add water charges @ 1% on

Rate

273.00 247.00 1.49 Total: 211.70

Add C.P & OH @15% on 213.82 Cost for 94.80 Kg Rate per One Kg: Rate as per DSR-12:

Rs 2.59 Rs 2.60

Item Code: 15.7.1 Demolishing brick work : In mud mortar. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

0.30 0.37 1.04

Add water charges @ 1% on

DSR-12

Rate 247.00 247.00 1.49 Total: 167.04

Page 608 of 2298

Add C.P & OH @15% on 168.71 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 194.02 Rs 194.00

Item Code: 15.7.2 Demolishing brick work : In lime mortar with old mughal bricks. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

1.24 0.46 1.04

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 421.45

Add C.P & OH @15% on 425.66 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 489.51 Rs 489.50

Item Code: 15.7.3 Demolishing brick work : In lime mortar. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

0.44 0.37 1.04

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 201.62

Add C.P & OH @15% on 203.64 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 234.19 Rs 234.20

Item Code: 15.7.4 Demolishing brick work : In cement mortar. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

1.06 0.90 2.47

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 487.80

Add C.P & OH @15% on 492.68 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 566.58 Rs 566.60

Page 609 of 2298

Item Code: 15.8.1 Removing mortar from bricks : From brick work in mud mortar. Code 0114 0115 0124 9999

Description LABOUR Beldar Coolie Mason 2nd class Sundries

Details of Cost for : 1000.00 Units Unit Quantity Day Day Day L.S.

2.40 1.60 0.40 1.82

Add water charges @ 1% on

Rate

247.00 247.00 273.00 1.49 Total: 1099.91

Add C.P & OH @15% on 1110.91 Cost for 1000.00 Units Rate per 1000 Nos: Rate as per DSR-12:

Rs 1277.55 Rs 1277.55

Item Code: 15.8.2 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m - From brick work in lime mortar

Code 0114 0115 0124 9999

Description LABOUR: Beldar Coolie Mason (brick layer) 2nd class Sundries

Details of Cost for : 1000.00 Units Unit Quantity Day Day Day L.S.

2.80 1.40 0.80 8.97

Add water charges @ 1% on

Rate

247.00 247.00 273.00 1.49 Total: 1269.17

Add C.P & OH @15% on 1281.86 Cost for 1000.00 Units Rate per 1000 Nos: Rate as per DSR-12:

Rs 1474.14 Rs 1474.15

Item Code: 15.8.3 Removing mortar from bricks : From brick work in cement mortar Code 0114 0115 0124 9999

Description LABOUR Beldar Coolie Mason 2nd class Sundries

Details of Cost for : 1000.00 Units Unit Quantity Day Day Day L.S.

3.50 1.50 1.24 8.06

Add water charges @ 1% on

Rate

247.00 247.00 273.00 1.49 Total: 1585.53

Add C.P & OH @15% on 1601.39 Cost for 1000.00 Units Rate per 1000 Nos: Rate as per DSR-12:

DSR-12

Rs 1841.60 Rs 1841.60

Page 610 of 2298

Item Code: 15.9.1 Demolishing stone rubble masonry : In lime mortar. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

0.61 0.49 1.95

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 274.61

Add C.P & OH @15% on 277.36 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 318.96 Rs 318.95

Item Code: 15.9.2 Demolishing stone rubble masonry : In cement mortar. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

1.30 1.04 2.73

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 582.05

Add C.P & OH @15% on 587.87 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 676.05 Rs 676.05

Item Code: 15.10.1 Dismantling dressed stone work ashlar face stone, marble work or precast concrete work : In lime mortar. Details of Cost for : 1.00 Cum Code Description Unit Quantity LABOUR 0114 Beldar Day 0.78 0115 Coolie Day 0.61 9999 Sundries L.S. 2.73 Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 347.40

Add C.P & OH @15% on 350.87 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 403.50 Rs 403.50

Item Code: 15.10.2 Dismantling dressed stone work ashlar face stone, marble work or precast concrete work : In cement mortar. Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate LABOUR 0114 Beldar Day 1.55 247.00

DSR-12

Page 611 of 2298

0115 9999

Coolie Sundries

Day L.S.

1.19 2.73

Add water charges @ 1% on

247.00 1.49 Total: 680.85

Add C.P & OH @15% on 687.66 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 790.81 Rs 790.80

Item Code: 15.11.1 Removing mortar from stones and cleaning stones : In lime mortar. Code 0124 0114 0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description LABOUR Mason 2nd class Beldar Coolie Sundries

Day Day Day L.S.

0.05 0.20 0.20 0.52

Add water charges @ 1% on

Rate 273.00 247.00 247.00 1.49 Total: 113.22

Add C.P & OH @15% on 114.35 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 131.50 Rs 131.50

Item Code: 15.11.2 Removing mortar from stones and cleaning stones : In cement mortar. Code 0124 0114 0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description LABOUR Mason (brick layer) 2nd class Beldar Coolie Sundries

Day Day Day L.S.

0.05 0.40 0.20 0.91

Add water charges @ 1% on

Rate 273.00 247.00 247.00 1.49 Total: 163.21

Add C.P & OH @15% on 164.84 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 189.57 Rs 189.55

Item Code: 15.12.1 Dismantling doors, windows & C.S. windows shutter : Of area 3 sqm. Code 0124 0114 0103 9999

DSR-12

Description LABOUR Mason 2nd class Beldar Blacksmith 2nd class Sundries

Details of Cost for : 1.00 No. Unit Quantity Day Day Day L.S.

0.10 0.18 0.05 1.43

Rate 273.00 247.00 273.00 1.49 Total:

Page 612 of 2298

Add water charges @ 1% on

87.54

Add C.P & OH @15% on 88.42 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 101.68 Rs 101.70

Item Code: 15.12.2 Dismantling doors, windows & C.S. windows shutter : Of area beyond 3 sqm. Details of Cost for : 1.00 No. Code Description Unit Quantity Detail of cost for each 0124 Mason (brick layer) 2nd class Day 0.13 0114 Beldar Day 0.25 0103 Blacksmith 2nd class Day 0.07 9999 Sundries L.S. 2.73 Refixing of collapsible gate including mending good the demaged floor, wall Add water charges @ 1% on

Rate 273.00 247.00 273.00 1.49

Total: 120.42

Add C.P & OH @15% on 121.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 139.86 Rs 139.85

Item Code: 15.13.1 Taking out door, windows : Of area 3 sqm. Code

0112 0114 9999

Description Detail of cost for each LABOUR Carpenter 2nd class Beldar Sundries

Details of Cost for : 1.00 No. Unit Quantity

Day Day L.S.

0.05 0.08 0.52

Add water charges @ 1% on

Rate

273.00 247.00 1.49 Total: 34.18

Add C.P & OH @15% on 34.52 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 39.70 Rs 39.70

Item Code: 15.13.2 Taking out door, windows : Of area byond 3 sqm. Code 0112 0114 9999

Description LABOUR Carpenter 2nd class Beldar Sundries

Details of Cost for : 1.00 No. Unit Quantity Day Day L.S.

0.07 0.10 0.91

Add water charges @ 1% on

DSR-12

Rate 273.00 247.00 1.49 Total: 45.17

Page 613 of 2298

Add C.P & OH @15% on 45.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 52.46 Rs 52.45

Item Code: 15.14.1 Dismantling wood work in frames : Of sectinal area 40 Sqcm and above. Code 0112 0114 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description LABOUR Carpenter 2nd class Beldar Sundries

Day Day L.S.

2.00 2.00 13.39

Add water charges @ 1% on

Rate 273.00 247.00 1.49 Total: 1059.95

Add C.P & OH @15% on 1070.55 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1231.13 Rs 1231.15

Item Code: 15.14.2 Dismantling wood work in frames : Of sectional area below 40 sqcm. Code

0112 0114 9999

Description Detail of cost for 10.00 m. LABOUR Carpenter 2nd class Beldar Sundries

Details of Cost for : 10.00 m Unit Quantity

Day Day L.S.

0.08 0.08 0.52

Add water charges @ 1% on

Rate

273.00 247.00 1.49 Total: 42.37

Add C.P & OH @15% on 42.79 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4.92 Rs 4.90

Item Code: 15.15.1 Extra for dismantling trusses rafters in span : Of sectional area 40 sqcm and above. Details of Cost for : 1.00 units Code Description Unit Quantity Detail of cost for 1 cum for every additional span of 1 metre

0103 0114 9999

LABOUR Blacksmith 2nd class Beldar Sundries

Day Day L.S.

0.20 0.30 13.39

Add water charges @ 1% on

Rate

273.00 247.00 1.49 Total: 148.65

Add C.P & OH @15% on 150.14 Cost for 1.00 units

DSR-12

Page 614 of 2298

Rate per Cum/mtr: Rate as per DSR-12:

Rs 172.66 Rs 172.65

Item Code: 15.15.2 Extra for dismantling trusses rafters in span : Of sectional area below 40 sqcm. Details of Cost for : 10.00 unit Code Description Unit Quantity Detail of cost for 10.00 metre for every additional span of 1 metre LABOUR 0103 Blacksmith 2nd class Day 0.006 0114 Beldar Day 0.008 9999 Sundries L.S. 0.39 Add water charges @ 1% on

Rate

273.00 247.00 1.49 Total: 4.20

Add C.P & OH @15% on 4.24 Cost for 10.00 unit Rate per Units: Rate as per DSR-12:

Rs 0.49 Rs 0.50

Item Code: 15.16.1 Extra for dismantling reusses rafters in height : Of sectional area 40 sqcm and above. Details of Cost for : 1.00 unit Code Description Unit Quantity Detail of cost for 1 cum for every additional height of 1 metre

0103 0114 9999

LABOUR Blacksmith 2nd class Beldar Sundries

Day Day L.S.

0.25 0.50 13.39

Add water charges @ 1% on

Rate

273.00 247.00 1.49 Total: 211.70

Add C.P & OH @15% on 213.82 Cost for 1.00 unit Rate per Units: Rate as per DSR-12:

Rs 245.89 Rs 245.90

Item Code: 15.16.2 Extra for dismantling reusses rafters in height : Of sectional area blow 40 sqcm. Details of Cost for : 10.00 unit Code Description Unit Quantity Detail of cost for 10.00 metre for every additional height of 1 metre LABOUR: 0103 Blacksmith 2nd class Day 0.01 0114 Beldar Day 0.02 9999 Sundries L.S. 0.39 Add water charges @ 1% on

Rate

273.00 247.00 1.49 Total: 8.25

Add C.P & OH @15% on 8.33 Cost for 10.00 unit

DSR-12

Page 615 of 2298

Rate per Units: Rate as per DSR-12:

Rs 0.96 Rs 0.95

Item Code: 15.17.1 Dismantling steel work in single sections : R.S. joists. Code

0103 0100 0114 9999

Details of Cost for : 100.00 Kg Unit Quantity

Description Detail of cost for 1 quintal LABOUR Blacksmith 2nd class Bandhani Beldar Sundries

Day Day Day L.S.

0.05 0.10 0.15 2.73

Add water charges @ 1% on

Rate

273.00 260.00 247.00 1.49 Total: 80.77

Add C.P & OH @15% on 81.58 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 0.94 Rs 0.95

Item Code: 15.17.2 Dismantling steel work in single sections : Channels, Angles, flats. Code 0103 0100 0114 9999

Details of Cost for : 100.00 Kg Unit Quantity

Description LABOUR: Blacksmith 2nd class Bandhani Beldar Sundries

Day Day Day L.S.

0.05 0.05 0.10 2.73

Add water charges @ 1% on

Rate 273.00 260.00 247.00 1.49 Total: 55.42

Add C.P & OH @15% on 55.97 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 0.64 Rs 0.65

Item Code: 15.18 Dismantling steel work in built up sections i/c disme- mbering and stacking. Code

0103 0100 0114 9999

Description Detail of cost for 1 quintal LABOUR Blacksmith 2nd class Bandhani Beldar Sundries

Details of Cost for : 100.00 Kg Unit Quantity

Day Day Day L.S.

0.15 0.10 0.25 4.16

Add water charges @ 1% on

Rate

273.00 260.00 247.00 1.49 Total: 134.90

Add C.P & OH @15% on 136.25 Cost for 100.00 Kg Rate per One Kg:

DSR-12

Rs 1.57

Page 616 of 2298

Rate as per DSR-12:

Rs 1.55

Item Code: 15.19 Dismantling steel work in built up sections without dismembering. Code

0100 0114 9999

Description Detail of cost for 1 quintal LABOUR Bandhani Beldar Sundries

Details of Cost for : 100.00 Kg Unit Quantity

Day Day L.S.

0.10 0.25 2.73

Add water charges @ 1% on

Rate

260.00 247.00 1.49 Total: 91.82

Add C.P & OH @15% on 92.74 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 1.07 Rs 1.05

Item Code: 15.20 Extra for dismantling trusses rafter in addi. span. Code

0100 0114 9999

Description Detail of cost for 1 quintal for every additional span of 1 metre beyond 10 metre LABOUR Bandhani Beldar Sundries

Details of Cost for : 100.00 unit Unit Quantity

Day Day L.S.

0.02 0.06 0.39

Add water charges @ 1% on

Rate

260.00 247.00 1.49 Total: 20.60

Add C.P & OH @15% on 20.81 Cost for 100.00 unit Rate per Units: Rate as per DSR-12:

Rs 0.24 Rs 0.25

Item Code: 15.21 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Details of Cost for : 100.00 units Code Description Unit Quantity Rate Detail of cost for 1 quintal for every additional height of 1 metre beyond 5 metre LABOUR 0100 Bandhani Day 0.02 260.00 0114 Beldar Day 0.06 247.00 9999 Sundries L.S. 0.39 1.49 Total: Add water charges @ 1% on 20.60 Add C.P & OH @15% on 20.81 Cost for 100.00 units Rate per Units:

DSR-12

Rs 0.24

Page 617 of 2298

Rate as per DSR-12:

Rs 0.25

Item Code: 15.22 Extra for making of structural steel work required to be reerected. Code

0130 0114

Description Detail of cost for 1 quintal LABOUR Mistry Beldar

Details of Cost for : 100.00 Kg Unit Quantity

Day Day

0.20 0.20

Add water charges @ 1% on

Rate

301.00 247.00 Total: 109.60

Add C.P & OH @15% on 110.70 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 1.27 Rs 1.25

Item Code: 15.23.1 Dismantling tile work in floor roofs laid in cement mortar : For 10 to 25 mm tiles. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Detail of cost for 10 sqm LABOUR 0124 Mason 2nd class Day 0.30 0114 Beldar Day 0.12 0115 Coolie Day 0.24 9999 Sundries L.S. 2.73 Add water charges @ 1% on

Rate

273.00 247.00 247.00 1.49 Total: 174.89

Add C.P & OH @15% on 176.64 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 20.31 Rs 20.30

Item Code: 15.23.2 Dismantling tile work in floor roofs laid in cement mortar : For 25 to 40 mm thick. Details of Cost for : 10.00 Sqm Code Description Unit Quantity LABOUR 0124 Mason (brick layer) 2nd class Day 0.59 0114 Beldar Day 0.18 0115 Coolie Day 0.24 9999 Sundries L.S. 2.73 Add water charges @ 1% on

Rate 273.00 247.00 247.00 1.49 Total: 268.88

Add C.P & OH @15% on 271.57 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 31.23 Rs 31.25

Page 618 of 2298

Item Code: 15.24 Demolishing dry brick pitching in floors, drains etc. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity Day Day L.S.

0.25 1.00 2.73

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 312.82

Add C.P & OH @15% on 315.95 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 363.34 Rs 363.35

Item Code: 15.25 Dismantling stone slab floo- ring laid in cement mortar. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

1.77 0.75 8.06

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 634.45

Add C.P & OH @15% on 640.79 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 73.69 Rs 73.70

Item Code: 15.26 Demolishing brick tile in terracing. Code 0124 0114 0115 9999

Description LABOUR Mason 2nd class Beldar Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day L.S.

0.54 0.16 0.24 2.47

Add water charges @ 1% on

Rate 273.00 247.00 247.00 1.49 Total: 249.90

Add C.P & OH @15% on 252.40 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 29.03 Rs 29.05

Item Code: 15.27 Code 0114

DSR-12

Description LABOUR Beldar

Details of Cost for : 1.00 Cum Unit Quantity Day

0.25

Rate 247.00

Page 619 of 2298

0115 9999

Coolie Sundries

Day L.S.

0.62 1.04

Add water charges @ 1% on

247.00 1.49 Total: 216.44

Add C.P & OH @15% on 218.60 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 251.39 Rs 251.40

Item Code: 15.28.1 Dismantling roofing inluding ridges, hips : G.S sheet. Code 0112 0114 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description LABOUR Carpenter 2nd class Beldar Sundries

Day Day L.S.

0.50 1.00 6.76

Add water charges @ 1% on

Rate 273.00 247.00 1.49 Total: 393.57

Add C.P & OH @15% on 397.51 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 45.71 Rs 45.70

Item Code: 15.28.2 Dismantling roofing inluding ridges, hips : Asbestos sheet. Code 0112 0114 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description LABOUR Carpenter 2nd class Beldar Sundries

Day Day L.S.

0.20 0.50 5.33

Add water charges @ 1% on

Rate 273.00 247.00 1.49 Total: 186.04

Add C.P & OH @15% on 187.90 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 21.61 Rs 21.60

Item Code: 15.29 Dismantling stone slab roofing over wooden karries or R.C.C. battens. Code 0114 0115 9999

DSR-12

Description LABOUR Beldar coolie Sundries

Details of Cost for : 1.00 Sqm Unit Quantity Day Day L.S.

1.77 0.75 8.06

Rate

Add water charges @ 1% on

247.00 247.00 1.49 Total: 634.45

Add C.P & OH @15% on

640.79

Page 620 of 2298

Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 736.91 Rs 736.90

Item Code: 15.30 Dismantling jack arch roofing and floors. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

1.19 1.21 8.06

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 604.81

Add C.P & OH @15% on 610.86 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 70.25 Rs 70.25

Item Code: 15.31 Dismantling tiled roofing with battens boarding etc. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

1.73 0.25 8.06

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 501.07

Add C.P & OH @15% on 506.08 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 58.20 Rs 58.20

Item Code: 15.32 Demolishing thatch roofing i/c mats, bamboo, jaffari etc. Code 0114 9999

Description LABOUR Beldar Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day L.S.

0.54 3.64

Add water charges @ 1% on

Rate 247.00 1.49 Total: 138.80

Add C.P & OH @15% on 140.19 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 16.12 Rs 16.10

Item Code: 15.33

DSR-12

Page 621 of 2298

Dismantling wooden ballies in posts and struts. Code 0114 0115 9999

Details of Cost for : 50.00 m Unit Quantity

Description LABOUR Beldar Coolie Sundries

Day Day L.S.

0.50 0.50 0.52

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 247.77

Add C.P & OH @15% on 250.25 Cost for 50.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5.76 Rs 5.75

Item Code: 15.34.1 Dismentling and stacking fencing posts : `T' or `L' iron or pipe. Code

0114 0115 9999

9999 9999

Details of Cost for : 1.00 No. Unit Quantity

Description Detail of cost for each LABOUR Beldar Coolie Excavation, transporting and stacking the posts to the required place within 50 metre lead, refilling the pit and dressing the same Extra for lifting of R.C.C. posts being heavier than L iron and cleaning the posts of stacking concrete Sundries

Rate

Day Day L.S.

0.107 0.067 0.26

247.00 247.00 1.49

L.S.

13.39

1.49

L.S.

1.43

1.49 Total: 65.45

Add water charges @ 1% on

Add C.P & OH @15% on 66.10 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 76.02 Rs 76.00

Item Code: 15.34.2 Dismentling and stacking fencing posts : R.C.C.. Code

0114 0115 9999 9999 9999 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

Detail of cost for each LABOUR Beldar Day Coolie Day Sundries L.S. Excavation, transporting and stacking the posts to the L.S. required place within 50 metre-s Extra for lifting of R.C.C. posts being heavier than L iron and L.S. cleaning the posts of stac Sundries L.S.

Rate

0.097 0.06 0.26 13.39

247.00 247.00 1.49 1.49

8.06

1.49

2.73

1.49 Total: 75.20

Add water charges @ 1% on

Add C.P & OH @15% on 75.95 Cost for 1.00 No.

DSR-12

Page 622 of 2298

Rate per Each: Rate as per DSR-12:

Rs 87.34 Rs 87.35

Item Code: 15.35 Cutting ballies or wooden posts of fencing. Code 9999 9999

Description Detail of cost for 1ballie (post) Cutting Transporting and stacking

Details of Cost for : 1.00 No. Unit Quantity L.S. L.S.

2.73 1.43

Add water charges @ 1% on

Rate 1.49 1.49 Total: 6.20

Add C.P & OH @15% on 6.26 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 7.20 Rs 7.20

Item Code: 15.36 Code

0114 9999

Description Detail of cost for 1 quintal LABOUR Beldar Sundries

Details of Cost for : 100.00 Kg Unit Quantity

Day L.S.

3.50 5.33

Add water charges @ 1% on

Rate

247.00 1.49 Total: 872.44

Add C.P & OH @15% on 881.16 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 10.13 Rs 10.15

Item Code: 15.37 Dismantling wooden trellis work excluding frames. Code 0124 0114 0115 9999

Description LABOUR Mason 2nd class Beldar Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day L.S.

0.10 0.25 0.25 2.73

Add water charges @ 1% on

Rate 273.00 247.00 247.00 1.49 Total: 154.87

Add C.P & OH @15% on 156.42 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 17.99 Rs 18.00

Item Code: 15.38 Details of Cost for : 10.00 Sqm

DSR-12

Page 623 of 2298

Code 0112 0114 0115 9999

Description LABOUR Carpenter 2nd class Beldar Coolie Sundries

Unit

Quantity

Rate

Day Day Day L.S.

0.10 0.40 0.20 4.16

273.00 247.00 247.00 1.49 Total: 181.70

Add water charges @ 1% on

Add C.P & OH @15% on 183.52 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 21.11 Rs 21.10

Item Code: 15.39.1 Dismantling wooden boarding in lining of walls : Upto 10 mm thick. Code 0112 0114 0115 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description LABOUR Carpenter 2nd class Beldar Coolie Sundries

Day Day Day L.S.

0.15 0.20 0.20 5.33

Add water charges @ 1% on

Rate 273.00 247.00 247.00 1.49 Total: 147.69

Add C.P & OH @15% on 149.17 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 17.16 Rs 17.15

Item Code: 15.39.2 Dismantling wooden boarding in lining of walls : Above 10 to 25 mm thick. Code 0112 0114 0115 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description LABOUR Carpenter 2nd class Beldar Coolie Sundries

Day Day Day L.S.

0.20 0.25 0.25 6.76

Add water charges @ 1% on

Rate 273.00 247.00 247.00 1.49 Total: 188.17

Add C.P & OH @15% on 190.05 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 21.86 Rs 21.85

Item Code: 15.39.3 Dismantling wooden boarding in lining of walls : Above 25 to 40 mm thick. Code 0112

DSR-12

Description LABOUR Carpenter 2nd class

Details of Cost for : 10.00 Sqm Unit Quantity Day

0.20

Rate 273.00

Page 624 of 2298

0114 0115 9999

Beldar Coolie Sundries

Day Day L.S.

0.30 0.30 13.39

247.00 247.00 1.49 Total: 222.75

Add water charges @ 1% on

Add C.P & OH @15% on 224.98 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 25.87 Rs 25.85

Item Code: 15.40.1 Dismantling precast concrete or stone slabs in walls, partition walls etc.: Thickness upto 40 mm. Details of Cost for : 10.00 Sqm Code Description Unit Quantity LABOUR 0124 Mason 2nd class Day 0.20 0114 Beldar Day 2.00 0115 Coolie Day 0.50 9999 Sundries L.S. 13.39

Rate 273.00 247.00 247.00 1.49 Total: 692.05

Add water charges @ 1% on

Add C.P & OH @15% on 698.97 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 80.38 Rs 80.40

Item Code: 15.40.2 Dismantling precast concrete or stone slabs in walls, partition walls etc.: Thickness above 40 mm upto 75 mm.

Code 0124 0114 0115 9999

Description LABOUR Mason 2nd class Beldar Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day L.S.

0.30 3.00 0.75 18.85

Add water charges @ 1% on

Rate 273.00 247.00 247.00 1.49 Total: 1036.24

Add C.P & OH @15% on 1046.60 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 120.36 Rs 120.35

Item Code: 15.41 Dismantling cement asbestors, ceiling or partition. Code 0112 0114 9999

DSR-12

Description LABOUR Carpenter 2nd class Beldar Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

0.20 0.30 5.33

Rate 273.00 247.00 1.49

Page 625 of 2298

Add water charges @ 1% on

Total: 136.64

Add C.P & OH @15% on 138.01 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 15.87 Rs 15.85

Item Code: 15.42.1 Dismantling C.I or asbestos rain pipe : 75 to 80 mm dia. pipe. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 10.00 m Unit Quantity Day Day L.S.

0.36 0.36 0.91

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 179.20

Add C.P & OH @15% on 180.99 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 20.81 Rs 20.80

Item Code: 15.42.2 Dismantling C.I or asbestos rain pipe : 100 mm dia. pipe. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 10.00 m Unit Quantity Day Day L.S.

0.36 0.38 1.56

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 185.10

Add C.P & OH @15% on 186.95 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 21.50 Rs 21.50

Item Code: 15.42.3 Dismantling C.I or asbestos rain pipe : 150 mm dia. pipe. Code 0114 0115 9999

Description LABOUR Beldar Coolie Sundries

Details of Cost for : 10.00 m Unit Quantity Day Day L.S.

0.36 0.40 2.08

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 190.82

Add C.P & OH @15% on 192.73 Cost for 10.00 m

DSR-12

Page 626 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 22.16 Rs 22.15

Item Code: 15.43.1 Dismantling : Water bound macadam road. Code

0114 0115 9999

Details of Cost for : 36.00 Sqm Unit Quantity

Description

Detail of cost for 36 sqm Consider a road 6 metres wide and 6 metres length wise 25 cm average depth = 9.00 cubic metre LABOUR For cutting road taking out soling and metalling including sorting and screening Beldar Day Coolie Day Labour for stacking of serviceable material L.S.

4.80 2.40 89.70

Add water charges @ 1% on

Rate

247.00 247.00 1.49 Total: 1912.05

Add C.P & OH @15% on 1931.17 Cost for 36.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 61.69 Rs 61.70

Item Code: 15.43.2 Code

0114 0115 9999

Details of Cost for : 36.00 Sqm Unit Quantity

Description

Detail of cost for 36 sqm Consider a road 6 metres wide and 6 metres length wise 30 cm average depth = 10.80 cubic metre LABOUR For cutting road taking out soling and metalling including sorting and screening Beldar Day Coolie Day Labour for stacking of serviceable material and disposal of L.S. unserviceable material within

Rate

9.60 4.80 107.64

247.00 247.00 1.49

Add water charges @ 1% on

Total: 3717.18

Add C.P & OH @15% on 3754.35 Cost for 36.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 119.93 Rs 119.95

Item Code: 15.44.1 Dismantling G.I. pipes : (external work). 15 to 40 mm nominal bore.

DSR-12

Code

Description

0114 0115 9999

LABOUR Trenching and refilling etc Beldar Coolie Dismantling G.I. pipe and stacking etc

Details of Cost for : 10.00 m Unit Quantity

Day Day L.S.

0.66 0.66 35.88

Rate

247.00 247.00 1.49 Total:

Page 627 of 2298

Add water charges @ 1% on

379.50

Add C.P & OH @15% on 383.30 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 44.08 Rs 44.10

Item Code: 15.44.2 Dismantling G.I. pipes : (external work). above 40 mm nominal bore. Code

Description

0114 0115 9999

LABOUR Trenching and refilling etc Beldar Coolie Dismantling G.I. pipe and stacking etc

Details of Cost for : 10.00 m Unit Quantity

Day Day L.S.

0.66 0.66 71.70

Add water charges @ 1% on

Rate

247.00 247.00 1.49 Total: 432.87

Add C.P & OH @15% on 437.20 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 50.28 Rs 50.30

Item Code: 15.45.1 Dismantling C.I. pipes : Upto 150 mm diameter.

02.008.01

Details of Cost for : 40.26 m Description Unit Quantity Detail of cost for 40.26 metre or 11 nos joints Earth work in excavation for dismantling pipes including refilling of excavated earth 1x40.26x0.55x0.75 m= 16.61cum Deduct for pipes of average 100 mm dia =lx40.26x(22/7)/4x(0.018)x(0.018) =0.44cum =16.17cum LABOUR E/W excavation in foundation trenches .. .. All kinds of soil. Cum 16.17

02.025 0761 0771 0117 0114 9999

Filling available excavated earth (excluding rock) .. .. Fuel wood Kerosene oil Assistant Fitter or 2nd class Fitter Beldar Carriage and sundries

Code

Cum quint litre Day Day L.S.

16.17 0.46 0.38 0.63 4.50 53.82

Add water charges @ 1% except on [A]+[B] i.e on

Rate

130.78 83.80 450.00 30.00 273.00 247.00 1.49 Total: 1582.08

Add C.P & OH @15% except on [A]+[B] i.e on 1597.90 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 131.83 Rs 155.45

Item Code: 15.45.2 Dismantling C.I. pipes : Above 150 mm dia upto 300 mm dia.

DSR-12

Page 628 of 2298

02.008.01

Details of Cost for : 40.26 m Description Unit Quantity Detail of cost for 40.26 metre or 11 nos joints Earth work in excavation for dismantling pipes including refilling of excavated earth 1x40.26x0.65x0.75 m =19.63cum Deduct for pipes of average 250 mm dia = lx40.26x(22/7)/4x(0.274)x(0.274)=2.37cum =17.26cum LABOUR E/W excavation in foundation trenches .. .. All kinds of soil. Cum 17.26

02.025 0761 0771 0117 0114 9999

Filling available excavated earth (excluding rock) .. .. Fuel wood Kerosene oil Assistant Fitter or 2nd class Fitter Beldar Carriage

Code

Cum quint litre Day Day L.S.

17.26 1.03 1.14 1.30 7.50 80.73

Add water charges @ 1% except on [A]+[B] i.e on

Rate

130.78 83.80 450.00 30.00 273.00 247.00 1.49 Total: 2825.39

Add C.P & OH @15% except on [A]+[B] i.e on 2853.64 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 173.51 Rs 198.70

Item Code: 15.45.3 Dismantling C.I. pipes : Above 300 mm diameter.

02.008.01

Details of Cost for : 40.26 m Description Unit Quantity Detail of cost for 40.26 metre or 11 nos joints Earth work in excavation for dismantling pipes including refilling of excavated earth 1x40.26x0.85x0.75 m =25.67cum Deduct for pipes of average 450 mm dia =lx40.26x(22/7)/4x(0.48)x(0.48) =7.29cum = 18.38cum LABOUR E/W excavation in foundation trenches .. .. All kinds of soil. Cum 18.38

02.025 0761 0771 0117 0114 9999

Filling available excavated earth (excluding rock) .. .. Fuel wood Kerosene oil Assistant Fitter or 2nd class Fitter Beldar Carriage & Sundries

Code

Cum quint litre Day Day L.S.

18.38 1.40 2.27 2.25 11.50 134.55

Add water charges @ 1% except on [A]+[B] i.e on

Rate

130.78 83.80 450.00 30.00 273.00 247.00 1.49 Total: 4353.33

Add C.P & OH @15% except on [A]+[B] i.e on 4396.86 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 223.56 Rs 250.40

Item Code: 15.46.1 Dismantling steel cylinder R.C pipes : Upto 600 mm diameter.

DSR-12

Page 629 of 2298

Code

0114 0115 0101 0761 0771 0117 0114 9999

Details of Cost for : 40.26 m Description Unit Quantity Detail of cost for 40.26 metre or 11 nos joints Earth work in excavation for dismantling pipes including refilling of excavated earth 1x40.26x1.30x1.65 m =86.36cum Deduct for pipes of average 450 mm dia =1x40.26x(22/7)/4x(0.48)x(0.48) =7.29 cum = 79.07 cum LABOUR Beldar Day 5.32 Coolie Day 5.46 Bhisti Day 0.31 Fuel wood quint 1.40 Kerosene oil litre 2.27 Assistant Fitter or 2nd class Fitter Day 2.25 Beldar Day 11.50 Carriage and sundries L.S. 134.55 Add water charges @ 1% on

Rate

247.00 247.00 260.00 450.00 30.00 273.00 247.00 1.49 Total: 7096.59

Add C.P & OH @15% on 7167.56 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 204.74 Rs 204.75

Item Code: 15.46.2 Dismantling steel cylinder R.C pipes : Above 600 mm diameter. Code

0114 0115 0101 0761 0771 0117 0114 9999

Details of Cost for : 40.26 m Description Unit Quantity Detail of cost for 40.26 metre or 11 nos joints Earth work in excavation for dismantling pipes including refilling of excavated earth lx40.26xl.30xl.65 m =86.36cum Deduct for pipes of average 900 mm dia = 1 x40.26x(22/7)/4x( 1.00)x( 1.00) =31.63cum =54.73 cum LABOUR Beldar Day 15.82 Coolie Day 16.25 Bhisti Day 0.93 Fuel wood quint 3.08 Kerosene oil litre 5.00 Assistant Fitter or 2nd class Fitter Day 10.00 Beldar Day 20.00 Carriage and sundries L.S. 179.40 Add water charges @ 1% on

Rate

247.00 247.00 260.00 450.00 30.00 273.00 247.00 1.49 Total: 17636.40

Add C.P & OH @15% on 17812.76 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 508.81 Rs 508.80

Item Code: 15.47.1 Dismantling asbestos cement pressure pipes : Upto 150 mm diameter.

DSR-12

Page 630 of 2298

Code

0114 0115 0101 0114 0115 9999

Details of Cost for : 10.00 m Description Unit Quantity Detail of cost for 10 metre or 11 nos joints Earth work in excavation for dismantling pipes including refilling of excavated earth 10.00x0.55x0.75 m =4.125cum Deduct for pipes of average 100 mm dia =1x10x(22/7)/4x(0.118)x(0.118) =0.109cum =4.016cum LABOUR Beldar Day 1.16 Coolie Day 1.19 Bhisti Day 0.07 Beldar Day 0.36 Coolie Day 0.38 Carriage and sundries L.S. 1.56 Add water charges @ 1% on

Rate

247.00 247.00 260.00 247.00 247.00 1.49 Total: 783.75

Add C.P & OH @15% on 791.59 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 91.03 Rs 91.05

Item Code: 15.47.2 Dismantling asbestos cement pressure pipes : Above 150 mm diameter. Code

0114 0115 0101 0114 0115 9999

Details of Cost for : 10.00 m Description Unit Quantity Detail of cost for 10 metre or 11 nos joints Earth work in excavation for dismantling pipes including refilling of excavated earth 10.00x0.65x0.75 m =4.88cum Deduct for pipes of average 250 mm dia = lxl0x(22/7)/4x(0.274)x(0.274)=0.590cum =4.29cum LABOUR Beldar Day 1.24 Coolie Day 1.28 Bhisti Day 0.07 Beldar Day 0.36 Coolie Day 0.88 Carriage and sundries L.S. 3.77 Add water charges @ 1% on

Rate

247.00 247.00 260.00 247.00 247.00 1.49 Total: 952.54

Add C.P & OH @15% on 962.07 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 110.64 Rs 110.65

Item Code: 15.48 Taking out CI cover with frame from RCC top slab of manholes of various sizes. Details of Cost for : 1.00 No. Code Description Unit Quantity Detail of cost for 1 man hole Demolition of R.C.C. slab

DSR-12

Rate

Page 631 of 2298

0114 0115 9999 9999

1.3x1.2x0.15 m=0.234cum Less cover 0.61x0.455x0.15 m =0.042cum =0.192cum LABOUR Beldar Coolie Removel of C.I. Cover with frame including stacking Sundries L.S.

Day Day L.S.

0.50 0.14 1.30

247.00 247.00 1.49

L.S.

7.15

1.49 Total: 170.67

Add water charges @ 1% on

Add C.P & OH @15% on 172.38 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 198.24 Rs 198.25

Item Code: 15.49 Taking out CI cover with frame from R.C.C. top slab of inspe- ction chambers. Details of Cost for : 1.00 No. Code Description Unit Quantity Detail of cost for 1 man hole Demolition of R.C.C. slab 1.1x0.9x0.15 m=0.148cum Less cover 0.61x0.455x0.15 m =0.042cum =0.106cumSay 0.11 cum LABOUR 0114 Beldar Day 0.29 0115 Coolie Day 0.08 9999 Removel of C.I. Cover with frame including stacking L.S. 0.65 9999 Sundries L.S. 5.33 Add water charges @ 1% on

Rate

247.00 247.00 1.49 1.49 Total: 100.30

Add C.P & OH @15% on 101.30 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 116.50 Rs 116.50

Item Code: 15.50 Dismantling of R.C.C spun vent shaft. Code

0114 0115

DSR-12

Description Detail of cost for 1 each Dismantling cement concrete (a) 1:4:8: 0.90x0.90x1.35m =1.094cum Less shaft 1/4x22/7x(0.450)x(0.450)x1.10 m =0.175cum =0.919cum Say 0.92cum Dismantling cement concrete (b)1:2:4 : 90x0.90x0.15m =0.122cum Less shaft 1/4x22/7x0.15x0.45 m =0.024cum =0.098cum Say 0. lOcum LABOUR Beldar Coolie

Details of Cost for : 1.00 No. Unit Quantity

Day Day

0.81 0.51

Rate

247.00 247.00

Page 632 of 2298

9999 0114 0115 9999 0130 0123 0124 0100 0114 9999

Sundries Beldar Coolie Sundries Mistry Mason 1 st class Mason 2nd class Bandhani Beldar Sundries for scaffolding etc

L.S. Day Day L.S. Day Day Day Day Day L.S.

1.82 0.16 0.07 0.52 0.25 0.12 0.12 1.00 1.00 53.82

Add water charges @ 1% on

1.49 247.00 247.00 1.49 301.00 301.00 273.00 260.00 247.00 1.49 Total: 1117.65

Add C.P & OH @15% on 1128.83 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1298.15 Rs 1298.15

Item Code: 15.51 Dismantling of road gully chambers of various sizes i/c CI grating with frame. Details of Cost for : 1.00 No. Code Description Unit Quantity Detail of cost for one chamber Dismantling cement concrete a) 1:5:10 : 1.05x1.00x0.15m=0.16cum Dismantling brick work in cement mortar 2.70x0.20x0.45m =0.24cum Dismantling cement concrete b) 1:2:4: 2.70x0.20x0.15m =0.08cum LABOUR 0114 Beldar Day 0.14 0115 Coolie Day 0.09 9999 Sundries L.S. 0.26 0114 Beldar Day 0.25 0115 Coolie Day 0.22 9999 Sundries L.S. 0.52 0114 Beldar Day 0.13 0115 Coolie Day 0.06 9999 Sundries for scaffolding etc L.S. 0.39 9999 Dismantling C.I. Grating L.S. 7.15 Add water charges @ 1% on

Rate

247.00 247.00 1.49 247.00 247.00 1.49 247.00 247.00 1.49 1.49 Total: 232.22

Add C.P & OH @15% on 234.54 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 269.72 Rs 269.70

Item Code: 15.52 Dismantling flushing cistern of any size. Code 0116 0114 9999

DSR-12

Description LABOUR Fitter (grade 1) Beldar Sundries

Details of Cost for : 1.00 No. Unit Quantity Day Day L.S.

0.25 0.50 17.94

Rate 301.00 247.00 1.49

Page 633 of 2298

Add water charges @ 1% on

Total: 225.48

Add C.P & OH @15% on 227.73 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 261.89 Rs 261.90

Item Code: 15.53.1 Dismantling of C.I sluice valve : upto 150 mm diameter Details of Cost for : 10.00 Nos Unit Quantity

Code

Description

0116 0117 0114 9999

LABOUR: Fitter (grade 1) Assistant Fitter or 2nd class Fitter Beldar Sundries for removing the RCC cover etc for dismantling sluice valve

Day Day Day L.S.

Rate

0.60 0.40 1.60 89.70

301.00 273.00 247.00 1.49

Add water charges @ 1% on

Total: 818.65

Add C.P & OH @15% on 826.84 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 95.09 Rs 95.10

Item Code: 15.53.2 Dismantling of C.I. sluice valve : Above 150 mm diameter. Code

0116 0117 0114 9999

Description Detail of cost of dismantling 10 sluice valves (ace.) 100mm LABOUR Fitter (grade 1) Assistant Fitter or 2nd class Fitter Beldar Sundries for removing the R.C.C. cover etc for dismantling sluice valve

Details of Cost for : 10.00 Nos Unit Quantity

Day Day Day L.S.

Rate

2.40 1.54 6.40 89.70

301.00 273.00 247.00 1.49

Add water charges @ 1% on

Total: 2857.27

Add C.P & OH @15% on 2885.84 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 331.87 Rs 331.85

Item Code: 15.54 Dismantling of spindle fire hydrant. Code 0116 0117 0114

DSR-12

Description LABOUR Fitter (grade 1) Assistant Fitter or 2nd class Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity Day Day Day

1.50 1.00 4.00

Rate 301.00 273.00 247.00

Page 634 of 2298

Add water charges @ 1% on

Total: 1712.50

Add C.P & OH @15% on 1729.63 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 198.91 Rs 198.90

Item Code: 15.55.1 Dismantling of C.C. platform along with curtain walls and base concrete etc : 120 x 120 cm (outside to outside).

Code

0114 0115 9999 0114 0115 9999 0114 0115 9999

Description Detail of cost for one platform Dismantling cement concret 1:5:10 4.00x0.35x0.12m =0.168cum 0.80x0.80x0.075m =0.048cum =0.216cum Say 0.22cum Dismantling brick work in cement mortar 4.00x0.20x0.30m =0.24cum 4.00x0.10x0.20m =0.088cum =0.328cum Say 0.33cum Dismantling 40 mm C.C. flooring 1:2:4 1.00x 1.00x0.04m =0.04cum LABOUR Beldar Coolie Sundries Beldar Coolie Sundries Beldar Coolie Sundries for scaffolding etc

Details of Cost for : 1.00 No. Unit Quantity

Day Day L.S. Day Day L.S. Day Day L.S.

0.19 0.12 0.39 0.35 0.30 0.91 0.06 0.03 0.13

Add water charges @ 1% on

Rate

247.00 247.00 1.49 247.00 247.00 1.49 247.00 247.00 1.49 Total: 261.48

Add C.P & OH @15% on 264.09 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 303.70 Rs 303.70

Item Code: 15.55.2 Dismantling of C.C. platform along with curtain walls and base concrete etc : 210 x 120 cm (outside to outside).

Code

DSR-12

Description Detail of cost for one platform Dismantling cement concrete 1:5:10 5.80x0.35x0.22m =0.243cum 0.80x1.70x0.075m =0.102cum =0.345cum Say 0.35cum Dismantling brick work in cement mortar 5.80x0.20x0.30m =0.348cum 6.20x0.10x0.20m =0.124cum =0.472cum Say 0.47cum

Details of Cost for : 1.00 No. Unit Quantity

Rate

Page 635 of 2298

0114 0115 9999 0114 0115 9999 0114 0115 9999

Dismantling 40 mm C.C. flooring 1:2:4 1.90x 1.00x0.04m =0.08cum LABOUR Beldar Coolie Sundries Beldar Coolie Sundries Beldar Coolie Sundries for scaffolding etc

Day Day L.S. Day Day L.S. Day Day L.S.

0.31 0.19 0.65 0.50 0.42 1.30 0.13 0.06 0.39

Add water charges @ 1% on

247.00 247.00 1.49 247.00 247.00 1.49 247.00 247.00 1.49 Total: 401.16

Add C.P & OH @15% on 405.17 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 465.95 Rs 465.95

Item Code: 15.55.3 Dismantling of cement concrete platform along with curtain walls and base concrete etc. - 320 x 120 cm (outside to outside)

Code

0114 0115 9999 0114 0115 9999 0114 0115 9999

Description Details of cost for one platform Details of cost for one platform Dismantling cement concrete 1:5:10 8.00x0.35x0.12m =0.336cum 2.80x0.80x0.075m =0.168cum =0.504cum Say 0.50cum Dismantling brick work in cement mortar 8.00x0.20x0.30m =0.48cum 8.40x0.10x0.20m =0.168cum =0.648cum Say 0.65cum Dismantling 40 mm C.C. flooring 1:2:4 3.00x1.00x0.04m =0.12cum LABOUR: Beldar Coolie Sundries Beldar Coolie Sundries Beldar Coolie Sundries for scaffolding etc.

Details of Cost for : 1.00 No. Unit Quantity

Day Day L.S. Day Day L.S. Day Day L.S.

0.44 0.28 0.91 0.69 0.59 1.56 0.19 0.09 0.52

Add water charges @ 1% on

Rate

247.00 247.00 1.49 247.00 247.00 1.49 247.00 247.00 1.49 Total: 567.61

Add C.P & OH @15% on 573.29 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 659.28 Rs 659.30

Page 636 of 2298

Item Code: 15.56 Dismantling old plaster or skirting raking out joints. Code 0114 0115 0101 9999

Description LABOUR Beldar Coolie Bhisti Sundries for scaffolding etc

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day L.S.

0.36 0.08 0.07 1.43

Add water charges @ 1% on

Rate 247.00 247.00 260.00 1.49 Total: 129.01

Add C.P & OH @15% on 130.30 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 14.99 Rs 15.00

Item Code: 15.57 Dismantling aluminium/Gypsum partitions etc. Code 0112 0114 9999

Description LABOUR Carpenter 2nd class Beldar Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

0.20 0.30 5.38

Add water charges @ 1% on

Rate 273.00 247.00 1.49 Total: 136.72

Add C.P & OH @15% on 138.09 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 15.88 Rs 15.90

Item Code: 15.58 Demolishing C.C/R.C.C work by mechanical means and stockpiling at designated locations. Details of Cost for : 1.00 Cum Code Description Unit Quantity LABOUR 0128 Mate Day 0.03 Labour for operating pneumatic tools 0139 Skilled Beldar Day 0.50 0114 Beldar Day 0.50 Labour for cutting reinforcement bars. 0103 Blacksmith 2nd class Day 0.50 0114 Beldar Day 0.50 MACHINERY 0040 Air compressor 250 cfm with two leads for day 0.125 preumatic cutters/ hammers. 0039 Tractor trolley . per d 0.05 0041 Joint cutting machine with 2-3 blades per d 0.125 Add water charges @ 1% on

Rate 260.00 260.00 247.00 273.00 247.00 1800.00 1350.00 900.00 Total: 926.30

Add C.P & OH @15% on 935.56 Cost for 1.00 Cum

DSR-12

Page 637 of 2298

Rate per One Cum: Rate as per DSR-12:

Rs 1075.89 Rs 1075.90

Item Code: 15.59 Dismantling of flexible pavement (Bitumenous courses) by mechanical. Code 0128 0114 0039 0038

Details of Cost for : 1.00 Cum Unit Quantity

Description LABOUR Mate Beldar MACHINERY Tractor trolley. Tractor with ripper attachment.

Day Day per d per d

Rate

0.01 0.30

260.00 247.00

0.0475 0.002

1350.00 1350.00 Total: 143.53

Add water charges @ 1% on

Add C.P & OH @15% on 144.97 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 166.72 Rs 166.70

Item Code: 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to municipal dumping ground beyond 50 m initial lead, for all leads including all lifts involved.

Code 2264

Details of Cost for : 1.00 Cum Unit Quantity cum 1.00

Description Carraige of Rubbish

Add water charges @ 1% on

Rate 87.60 Total: 87.60

Add C.P & OH @15% on 88.48 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 101.75 Rs 101.75

Item Code: 16.1 Preparation of sub grade and consolidating with road roller. Code

0128 0115 0114 0003 0113 1235 9999 9999

DSR-12

Description (A) preparation of subgrade. Earth work in excavation including dressing 100sqm.x22.5cm (average depth) = 22.5cum. LABOUR Mate Coolie Beldar Hire charges of road roller Chowkidar Diesel for road roller @ 18 litres Carriage of diesel Sundries (B) Conslidation of subgrade

Details of Cost for : 100.00 Sqm Unit Quantity

Rate

etc.

Day Day Day Day Day litre L.S. L.S.

1.80 18.00 0.27 0.054 0.054 0.972 1.43 6.76

260.00 247.00 247.00 1500.00 247.00 41.29 1.49 1.49

Page 638 of 2298

Roller charges (one roller does 1860 sqm. of conosolidation of sub - grade with road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade 0003 0113 1235 9999 9999

Hire charges of Diesel Road Roller - 8 to 10 tonne Chowkidar Diesel oil Carriage of diesel. Sundries

Day Day litre L.S. L.S.

0.054 0.054 0.972 1.43 6.76

Add water charges @ 1% on

1500.00 247.00 41.29 1.49 1.49 Total: 5274.03

Add C.P & OH @15% on 5326.77 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 61.26 Rs 61.25

Item Code: 16.2 Extra for compaction of earth work in embankment under opti- mum moisture conditions. Details of Cost for : 10.00 Cum Code Description Unit Quantity LABOUR (Extra to item No.2.3 in Earth work) 0101 Bhishti Day 0.17 Roller charges (one roller does 1860sqm. of consolidation per day of 8 hours and uses 18 litres diesel) 0003 0113 1235 9999 9999

Hire charges of road roller Chowkidar Carriage of diesel Sundries

Day Day litre L.S. L.S.

0.008 0.008 0.144 0.39 1.43

Add water charges @ 1% on

Rate

260.00

1500.00 247.00 41.29 1.49 1.49 Total: 66.84

Add C.P & OH @15% on 67.51 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 7.76 Rs 7.75

Item Code: 16.3.1 Supplying & stacking at site: 90mm to 45mm size stone aggregate. Code 2901 2902 0291 2206

Description MATERIALS: Stone Aggregate 125 mm (one size) Stone Aggregate 90 mm (one size) Stone Aggregate 63 mm (one size) Carriage

Details of Cost for : 1.00 Cum Unit Quantity cum cum cum cum

0.10 0.65 0.25 1.00

Add water charges @ 1% on

Rate 750.00 750.00 850.00 95.22 Total: 870.22

Add C.P & OH @15% on 878.92 Cost for 1.00 Cum

DSR-12

Page 639 of 2298

Rate per One Cum: Rate as per DSR-12:

Rs 1010.76 Rs 1010.75

Item Code: 16.3.2 Supplying & stacking at site: 63mm to 45mm size stone aggregate. Code 2902 0291 0292 2206

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS : Stone Aggregate 90 mm (one size). Stone Aggregate 63 mm (one size) Stone Aggregate 53 mm (one size) Carriage of aggregate

cum cum cum cum

0.10 0.65 0.25 1.00

Add water charges @ 1% on

Rate 750.00 850.00 900.00 95.22 Total: 947.72

Add C.P & OH @15% on 957.20 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1100.78 Rs 1100.80

Item Code: 16.3.3 Supplying & stacking at site: 53mm to 22.4mm size stone aggregate. Code 0291 0292 0293 2206

Description MATERIALS : Stone Aggregate 63mm (one size) Stone Aggregate 53 mm (one size) Stone Aggregate 45mm (one size) Carriage

Details of Cost for : 1.00 Cum Unit Quantity cum cum cum cum

0.05 0.30 0.65 1.00

Add water charges @ 1% on

Rate 850.00 900.00 950.00 95.22 Total: 1025.22

Add C.P & OH @15% on 1035.47 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1190.79 Rs 1190.80

Item Code: 16.3.4 Supplying & stacking at site: Over burnt (Jhama) brick agg. 120 mm to 40 mm. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 2908 Brick aggregate 120 mm to 40 mm size cum 1.00 2260 Carriage cum 1.00 Add water charges @ 1% on

Rate 330.00 95.22 Total: 425.22

Add C.P & OH @15% on 429.47 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 493.89 Rs 493.90

Item Code: 16.3.5

DSR-12

Page 640 of 2298

Supplying & stacking at site: Over burnt (Jhama) brick agg. 90 mm to 45 mm. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS : 2909 Brick aggregate 90mm to 45mm cum 1.00 2260 Carriage cum 1.00 Add water charges @ 1% on

Rate 360.00 95.22 Total: 455.22

Add C.P & OH @15% on 459.77 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 528.74 Rs 528.75

Item Code: 16.3.6 Supplying & stacking at site: Stone screening 13.2 mm nominal size (Type A). Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIAL 2910 Stone chippings 13.2mm cum 0.05 2911 Stone chippings 10mm/11.2mm cum 0.80 2903 Stone chippings 5.6mm cum 0.15 2202 Carriage cum 1.00 Add water charges @ 1% on

Rate 1050.00 1050.00 1150.00 87.60 Total: 1152.60

Add C.P & OH @15% on 1164.13 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1338.75 Rs 1338.75

Item Code: 16.3.7 Supplying & stacking at site: Stone screening 11.2 mm nominal size (Type B). Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIAL 2911 Stone chippings 11.2mm cum 0.10 2903 Stone chippings 5.6mm cum 0.75 2904 Stone screenings 180 mircorn cum 0.15 2202 Carriage of stone aggregate 11.2mm & 5.6mm cum 0.85 2267 Carriage of stone screenings 180 mircron cum 0.15 Add water charges @ 1% on

Rate 1050.00 1150.00 1150.00 87.60 87.60 Total: 1227.60

Add C.P & OH @15% on 1239.88 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1425.86 Rs 1425.85

Item Code: 16.3.8 Supplying & stacking at site: Red bajri. Code

Description

Details of Cost for : 1.00 Cum Unit Quantity

Rate

MATERIAL

DSR-12

Page 641 of 2298

0304 2311

Cost of bajri at quarry Carriage

cum cum

1.00 1.00

Add water charges @ 1% on

900.00 87.60 Total: 987.60

Add C.P & OH @15% on 997.48 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1147.10 Rs 1147.10

Item Code: 16.3.9 Code

Description

0114 0115 0979 2241

Excavation: Beldar Coolie Royalty for good earth Carriage of good earth by mechanical

Details of Cost for : 1.00 Cum Unit Quantity Day Day cum cum

0.177 0.167 1.00 1.00

Add water charges @ 1% on

Rate 247.00 247.00 30.00 109.50 Total: 224.47

Add C.P & OH @15% on 226.71 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 260.72 Rs 260.70

Item Code: 16.3.10 Supplying and stacking at site. Moorum. Code 0810 2265

Description MATERIALS: Moorum Carraige of Moorum

Details of Cost for : 1.00 Cum Unit Quantity cum cum

1.00 1.00

Add water charges @ 1% on

Rate 450.00 87.60 Total: 537.60

Add C.P & OH @15% on 542.98 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 624.43 Rs 624.45

Item Code: 16.4 Laying sprading and compacting stone aggregate of specified sizes to water bound macadam specifications i/c spreading in uniform thickness, rolling road roller 8 - 10 tonne. Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate LABOUR 0114 Beldar Day 0.26 247.00 0115 Coolie Day 0.26 247.00 0101 Bhisti Day 0.26 260.00 Roller charges (one roller does 30 cum consolidation per day of 8 hours and uses 18 litres of diesel oil). 0003 Hire charges of Road Roller Day 0.033 1500.00 0113 Chowkidar Day 0.033 247.00

DSR-12

Page 642 of 2298

1235 9999 9999

Diesel for road roller @ 18 litres 0.033x18 = 0.59 Diesel oil Carriage of diesel Sundries

litre L.S. L.S.

0.59 1.43 2.73

Add water charges @ 1% on

41.29 1.49 1.49 Total: 284.25

Add C.P & OH @15% on 287.09 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 330.15 Rs 330.15

Item Code: 16.5.1 Laying water bound macadam sub -base with brick agg. and bli- nding material : Over burnt (Jhama) brick agg. 120 mm to 40 mm.

Code 0114 0115 0101

0003 0113 1235 9999 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description LABOUR Beldar Coolie Bhishti Roller charges (one roller does 230cum. consolidation per day of 8 hours and uses 18 litres of diesel oil) Hire charges of road roller Chowkidar Diesel for road roller @ 18 litres per day 18x0.004=0.072 Carriage of diesel Sundries

Rate

Day Day Day

0.35 0.26 0.18

247.00 247.00 260.00

Day Day litre L.S. L.S.

0.004 0.004 0.072 0.39 2.73

1500.00 247.00 41.29 1.49 1.49 Total: 212.08

Add water charges @ 1% on

Add C.P & OH @15% on 214.20 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 246.33 Rs 246.35

Item Code: 16.5.2 Laying water bound macadam sub -base with brick agg. and bli- nding material : Over burnt (Jhama) brick agg. 90 mm to 45 mm.

Code 0114 0115 0101

0003 0113 1235 9999 9999

DSR-12

Details of Cost for : 1.00 Cum Unit Quantity

Description LABOUR Beldar Coolie Bhishti Roller charges (one roller does 230cum. consolidation per day of 8 hours and uses 18 litres of diesel oil) Hire charges of road roller Chowkidar Diesel for road roller @ 18 litres per day 18x0.004=0.072 Carriage of diesel Sundries

Rate

Day Day Day

0.35 0.26 0.18

247.00 247.00 260.00

Day Day litre L.S. L.S.

0.004 0.004 0.072 0.39 2.73

Add water charges @ 1% on

1500.00 247.00 41.29 1.49 1.49 Total: 212.08

Add C.P & OH @15% on

214.20

Page 643 of 2298

Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 246.33 Rs 246.35

Item Code: 16.6.1 Spreading 6 mm thick red bajri watering and rolling complete: With road roller/ hand roller. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate Details of cost for 6 mm thick and 100.00 sqm area = 0.60 cum. (A) Supplying and stacking of Red bajri at site. MATERIAL: 0304 Red Bajri cum 0.60 900.00 2311 Carriage of Red bajri cum 0.60 87.60 (B) Spreading of red bajri LABOUR 0114 Beldar Day 0.54 247.00 0101 Bhishti Day 0.54 260.00 Roller charges (one roller does 1860sqm. consolidation per day of 8 hours and uses 18 litres of diesel oil) 0003 Hire charges of road roller Day 0.054 1500.00 0113 Chowkidar Day 0.054 247.00 1235 Diesel for road roller @ 18 litres per day i.e. litre 18x0.054=0.972 litre 0.972 41.29 9999 Carriage of diesel L.S. 1.43 1.49 Total: Add water charges @ 1% on 1002.94 Add C.P & OH @15% on 1012.97 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 11.65 Rs 11.65

Item Code: 16.7.1 Brick edging in full brick width and half brick depth : With F.P.S. bricks of class designation 75. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIAL 2602 Common burnt clay F.P.S (non modular) Bricks of class 1000 160.00 designation 7.5 2201 Carriage of Bricks 1000 160.00 0123 Mason 1st class Day 0.17 0124 Mason 2nd class Day 0.17 0115 Coolie Day 0.35 9999 Removal of rubbish L.S. 17.94 9999 Sundries L.S. 8.97 Add water charges @ 1% on

Rate 2900.00 233.60 301.00 273.00 247.00 1.49 1.49 Total: 725.51

Add C.P & OH @15% on 732.77 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 84.27 Rs 84.25

Page 644 of 2298

Item Code: 16.8.1 Brick edging laid lengthwise with half brick depth : With F.P.S. bricks of class designation 75. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIAL 2602 Common burnt clay F.P.S (non modular) Bricks of class 1000 49.00 designation 7.5 2201 Carriage of Bricks 1000 49.00 Labour 0123 Mason 1st class Day 0.04 0124 Mason 2nd class Day 0.04 0115 Coolie Day 0.09 9999 Removal of rubbish L.S. 4.16 Add water charges @ 1% on

Rate 2900.00 233.60 301.00 273.00 247.00 1.49 Total: 204.94

Add C.P & OH @15% on 206.99 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 23.80 Rs 23.80

Item Code: 16.9 Scarifying metalled (water- bound) road surface. Code 0114 0115

0003 0113 1235 9999 9999

Details of Cost for : 100.00 Sqm Unit Quantity

Description LABOUR Beldar Coolie Consolidation of scarified material 100sqm.x50mm = 5cum Less 20% wastage = 1 cum. = 4 cum. Hire charges of road roller Chowkidar Diesel for road roller @ 18 litres/ day(8 hour) Carriage Sundries

Rate

Day Day

1.35 1.08

247.00 247.00

Day Day litre L.S. L.S.

0.132 0.132 2.376 1.43 5.46

1500.00 247.00 41.29 1.49 1.49 Total: 939.19

Add water charges @ 1% on

Add C.P & OH @15% on 948.58 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 10.91 Rs 10.90

Item Code: 16.10 Making bajri path including preparation of subgrade, S/L brick aggregate. Code

02.006.01

DSR-12

Details of Cost for : 100.00 Sqm Description Unit Quantity Earth work in excavation including dressing etc. 100x0.075=7.5cum. E/W in excavation over areas (exceeding 30cm in depth. 1.5m 7.50 in width 10sqm on plan) - All Collection and stacking of brick aggregate 53 mm nominal size 100x0.075 =7.50cum. Brick Aggregate

Rate

129.35

Page 645 of 2298

0286 2260

16.003.08

16.003.10

0114 0115 0101 0003 0113 1235 9999 9999 0003 0113 1235 9999

53 mm nominal size 100x0.75=7.50cum. cum Carriage cum Supply staking Red Bajri 100x0.012= 1.2 cum. Supplying & stacking at site: Red bajri. Collection and stacking of moorum at site 100x0.012= 1.20cum. Supplying and stacking at site. Moorum. Spreading and consolidation of brick aggregate and blinding material etc. Beldar Day Coolie Day Bhishti Day Hire charges of road roller Day Chowkidar Day Diesel for road roller @ 18 litres/ day(8 hour) litre Carriage of diesel L.S. Sundries L.S. Spreading of red bajri, watering and rolling Roller charges Day Chowkidar Day Diesel for road roller litre Carriage of diesel L.S.

7.50 7.50

490.00 95.22

1.20

1147.10

1.20

624.43

1.95 2.63 1.35 0.135 0.135 2.43 10.79 20.15

247.00 247.00 260.00 1500.00 247.00 41.29 1.49 1.49

0.054 0.054 0.972 0.55

1500.00 247.00 41.29 1.49 Total: 6388.98

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 6452.87 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 105.17 Rs 105.20

Item Code: 16.11 Dry stone pitching 22.5 Cm thick including supply of stones. Code

1158 2216 0123 0124 0114 0115 9999

Description MATERIAL Stone for pitching 15 cm x 22.5 crn thick Carriage 2.25x2245/1000 = 5.05 t LABOUR Mason 1 st class Mason 2nd class Beldar Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

cum tonne

2.25 5.05

420.00 77.87

Day Day Day Day L.S.

1.08 1.08 2.15 1.61 6.76

301.00 273.00 247.00 247.00 1.49 Total: 2896.95

Add water charges @ 1% on

Add C.P & OH @15% on 2925.92 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 336.48 Rs 336.50

Item Code: 16.12.1 Dry brick pitching half brick thick in drains, road path including suplly of bricks : with FPS bricks with class designation 75.

DSR-12

Page 646 of 2298

Code 2602 2201 0123 0124 0114

Details of Cost for : 10.00 Sqm Unit Quantity

Description

MATERIAL Common burnt clay F.P.S (non modular) Bricks of class 1000 designation 7.5 Carriage for bricks 1000 LABOUR Mason 1st class Day Mason 2nd class Day Beldar Day

Rate

645.00

2900.00

645.00

233.60

0.40 0.40 1.08

301.00 273.00 247.00 Total: 2517.53

Add water charges @ 1% on

Add C.P & OH @15% on 2542.71 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 292.41 Rs 292.40

Item Code: 16.13.1 Cutting road and making good the same : Bituminous portion. Code

16.003.03 16.003.08 16.003.10 2911 2202 0309 2211

0114 0115 0114 0115

0114 0115 0101

0114 0115 9999

DSR-12

Description Details of cost for 1.08cum. (road 6 metres wide, 0.6 metre length wise and 0.30m (average depth) volume =• 1.08 cum). MATERIAL Supplying and stacking stone aggregate 53mm to 24mm nominal size at site. Supplying & stacking at site: 53mm to 22.4mm size stone aggregate. Supplying & stacking at site: Red bajri. (Rate as per item No. 16.3.8) Supplying and stacking at site. Moorum. (Rate as per item No. 16.3.10) Stone chipping 11.2mm size Carriage of aggregate Paving bitumen S-90 of approved quality Carriage LABOUR For cutting road and taking out soling and metalling including sorting and screening. Beldar Coolie Relaying soling stone 3.6x0.15=0.54cum. Beldar Coolie Relaying road metal with extra quantity and consolidation to 0.10m, thickness 3.6x0.10=0.36cum. Beldar Coolie Bhishti Painting two coats, 3.6sqm. including labour for spreading grit Beldar Coolie Barrier, chowkidar, sprayman, mate, etc.

Details of Cost for : 1.08 Cum Unit Quantity

Rate

0.09

1190.79

0.023

1147.10

0.022

624.43

0.092 0.092 0.011 0.011

1050.00 87.60 37000.00 87.60

Day Day

0.96 0.48

247.00 247.00

Day Day

0.24 0.24

247.00 247.00

Day Day Day

0.71 0.48 0.10

247.00 247.00 260.00

Day Day L.S.

0.48 0.48 40.43

247.00 247.00 1.49 Total:

cum cum tonne tonne

Page 647 of 2298

Add water charges @ 1% except on [A]+[B]+[C] i.e on

1604.15

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 1620.19 Cost for 1.08 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1861.58 Rs 1861.60

Item Code: 16.13.2 Cutting road and making good the same : Water bound macadam. Code

16.003.03

16.003.08 16.003.10

0114 0115 0114 0115

0114 0115 0101 9999

Description Consider a road 6 metres wide and 0.6m. lengthwise and 0.25m cm average depth =0.90cum. MATERIAL Supplying and stacking stone aggregate 53mm to 22 mm nominal size at site. Supplying & stacking at site: 53mm to 22.4mm size stone aggregate. Supplying and stacking red bajri at site Supplying & stacking at site: Red bajri. Supplying and stacking moorum at site. Supplying and stacking at site. Moorum. LABOUR For cutting road and taking out soling and metalling including sorting and screening. Beldar Coolie For relaying soling stone 3.6x0.15=0.54cum. Beldar Coolie For relaying road metal with extra quantity and consolidation to 0.10m thickness 3.6x0.10=0.36cum. Beldar Coolie Bhishti Barrier and chowkidar etc.

Details of Cost for : 0.90 Cum Unit Quantity

Rate

0.09

1190.79

0.023

1147.10

0.022

624.43

Day Day

0.48 0.24

247.00 247.00

Day Day

0.24 0.24

247.00 247.00

Day Day Day L.S.

0.48 0.48 0.10 53.82

247.00 247.00 260.00 1.49 Total: 639.71

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 646.11 Cost for 0.90 Cum Rate per One Cum: Rate as per DSR-12:

Rs 989.24 Rs 989.25

Item Code: 16.14 Cutting bajri paths and making good the same. Code

0286 2260

DSR-12

Description

Details of Cost for : 10.00 Sqm Unit Quantity

10x0.075=0.75cum. MATERIAL Supplying and stacking 50mm brick aggregate at site(extra cum quantity) Carriage cum Supplying and stacking red bajri at site

Rate

0.19

490.00

0.19

95.22

Page 648 of 2298

16.003.08 16.003.10

0114 0115

Supplying & stacking at site: Red bajri. Supplying and stacking moorum at site Supplying and stacking at site. Moorum. LABOUR For cutting, sorting out, spreading and consolidation of aggregate Beldar Day Coolie Day

0.06

1147.10

0.06

624.43

1.60 0.80

247.00 247.00 Total: 703.99

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 711.03 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 92.40 Rs 92.40

Item Code: 16.15.1 Supplying at site : RCC Standards post/ Struts/ rails/pales of mix 1: 1.5:3 with wooden plugs or 6 mm bar nibs wherever required.

Code

04.001.02

0114 0101 0123 0124 0128

05.022.02

DSR-12

Description Details of cost for 10 posts = 0.336cum Cubical contents of one post Area bottom A1 =(15+12.5)/2 x8.75+½x3.14 x(6.25)² =120.31+61.38=181.69sqm. Area bottom A2 = (10+7.5)/2 x6.25+½x3.14 x(3.75)² sqm = 54.68+22.08 = 76.76 sqm. (A1 A2 ) = 118.10sqm A1+A2+ SQRT(A1.A2)= 0.03766 sqm Volume = (1.05)/3x0.03766 = 0.01316 cum =0.0132cum. Volume of lower and square portion (16.5x16.5x75)/100x100x100 = 0.0204cum. Total volume = 0.0132+0.0204 cum = 0.0336 cum. Qty. for 10 post = 0.0336x10 = 0.336cum. Cement concrete 1:1.5:3 (1 Cement: 1.5 Coarse sand : 3 graded stone aggregate 12.5mm nominal size) P/L CC excluding centering - All work up to plinth level: 1:1½:3 - Coarse sand, 20mmstone Extra labour for laying cement concrete in RCC work Beldar Bhishti Mason 1 st class Mason 2nd class Mate M.S. Reinforcement 6mm dia. bars 10x4xl.88m = 75.20m+ 10x9x0.50m=45.00m = 120.20m 120.2)[email protected]/m =26.44kg. Reinforcement for RCC work :- Upto plinth level - Hard drawn steel wire. Centering and shuttering

Details of Cost for : 0.336 Cum Unit Quantity

Day Day Day Day Day

Rate

0.336

4904.97

0.034 0.067 0.013 0.013 0.013

247.00 260.00 301.00 273.00 260.00

26.44

58.15

Page 649 of 2298

05.009.01

0367 2209 0983 2261 0114 0101 0155 0115 0101 9999 9999 9999 9999 9999 9999

Centering & shuttering including strutting, propping etc. Foundations, footings, bases o 6mm C.Plaster 1:2 (1 Cement: 2 fine sand) Details of cost for 9.88 sqm. (0.072)/l 0x9.88 = 0.071 Cement Carriage Fine sand Carriage Beldar Bhishti Mason Coolie Bhishti Hire and running charges of mixer Extra for removing burr, cleaning with wire brushes, pock making with pointed tool etc. co Scaffolding and sundries Carriage of RCC posts Wooden plugs or 6 mm bar nibs Sundries

6.99

166.88

tonne tonne cum cum Day Day Day Day Day L.S. L.S.

0.05 0.05 0.07 0.07 0.05 0.02 0.64 0.80 0.27 1.95 13.26

5000.00 77.87 640.00 87.60 247.00 260.00 287.00 247.00 260.00 1.49 1.49

L.S. L.S. L.S. L.S.

11.57 53.82 12.22 13.52

1.49 1.49 1.49 1.49 Total: 968.96

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 978.65 Cost for 0.336 Cum Rate per One Cum: Rate as per DSR-12:

Rs 16302.08 Rs 16302.45

Item Code: 16.15.2 Supplying at site : Welded steel wire fabrick of required width rectangular mesh. Details of Cost for : 209.25 Kg Code Description Unit Quantity Details of cost for 27 sqm. MATERIAL 1021 Steel wire fabric 0.9m wide rectangular mesh 75x25mm size sqm 27.00 weight not less than 7.75kg/s 2314 Carriage of wire tonne 0.209 7.75x27=209.25kg=0.209tonne Add water charges @ 1% on

Rate

430.00 77.67 Total: 11626.23

Add C.P & OH @15% on 11742.49 Cost for 209.25 Kg Rate per One Kg: Rate as per DSR-12:

Rs 64.53 Rs 64.55

Item Code: 16.16 S/F turn buckles and straining bolts for barbed wire fencing. Code 1030 1028 9999

DSR-12

Description MATERIAL Turn buckles Straining bolts Carriage of turn buckles and straining bolts Labour for fixing straining bolts and turn buckles

Details of Cost for : 1.00 sets Unit Quantity each each L.S.

1.00 1.00 2.73

Rate 15.00 70.00 1.49

Page 650 of 2298

0103

Blacksmith 2nd class

Day

0.10

Add water charges @ 1% on

273.00 Total: 116.37

Add C.P & OH @15% on 117.53 Cost for 1.00 sets Rate per Each Set: Rate as per DSR-12:

Rs 135.16 Rs 135.15

Item Code: 16.17.1 Fencing with RCC post placed at required distance,embedded in CC blocks, provided with horizontal lines &2 diagonals of barbed wire. With G.I. barbed wire. Details of Cost for : 333.00 m Code Description Unit Quantity Rate Details of cost for 30m MATERIAL G.I. barbed wire 30x9 = 270m+ 10x6.32 = 63m. = 333.00m. 1029 333m @9.38kg/100m =31.24kg = 0.31q quint 0.31 5175.00 2314 Carriage tonne 0.03 77.67 9999 G.I. staples or binding wire L.S. 49.40 1.49 Labour for fixing costs in line, fixing and stretching wire 0123 Mason 1st class Day 0.12 301.00 0124 Mason 2nd class Day 0.12 273.00 0114 Beldar Day 0.50 247.00 0102 Blacksmith 1st class Day 0.50 301.00 0103 Blacksmith 2nd class Day 0.50 273.00 9999 Sundries L.S. 13.52 1.49 Total: Add water charges @ 1% on 2179.71 Add C.P & OH @15% on 2201.51 Cost for 333.00 m Rate per One Metre: Rate as per DSR-12:

Rs 7.60 Rs 7.60

Item Code: 16.18.1 1.2 M high fencing with 1.8 M sal balli posts, 30 Cm girth (min) placed every 2.50 Mtr apart provided with 6 horizo- ntal lines and two diagonals of barbed wire(cost of posts, struts, earth work & concrete to be paid for separately) : With G.I. barbed wi

Code

1029 2314

DSR-12

Description Details of cost for 30m MATERIAL: G.I. barbed wire 30x9 = 270.00m 2xl0x( 12+32) 1/2 = 63.24 m. = 333.24m 333.24m @9.38kg/l00m =31.26 kg say 0.31 qtl Carriage of barbed wire supplying & Fixing. Turn buckle & staple

Details of Cost for : 333.24 m Unit Quantity

quint tonne

0.31 0.031

Rate

5175.00 77.67

Page 651 of 2298

16.016

S/F turn buckles and straining bolts for barbed wire fencing.

9999

G.I. staples Labour for fixing posts in line and fixing and stretching wire:

0123 0124 0114 0102 0103

Mason 1st class Mason 2nd class Beldar Blacksmith 1st class Blacksmith 2nd class

10.00

135.16

L.S.

49.40

1.49

Day Day Day Day Day

0.12 0.12 0.50 0.50 0.50

301.00 273.00 247.00 301.00 273.00 Total: 2159.65

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 2181.25 Cost for 333.24 m Rate per One Metre: Rate as per DSR-12:

Rs 11.58 Rs 11.60

Item Code: 16.19 Supplying at site and fixing Angle iron post for fencing work . Code

1007 2205 0103 0114 0103 0114 9999

Description MATERIAL: M.S. angle = 1.00 qtl. Add 5% wastage = 0.05 qtl. =1.05 qtl. Carriage of angle iron LABOUR Blacksmith 2nd class Beldar For spotting, bending of angle and drilling holes etc. : Blacksmith 2nd class Beldar Sundries such as drilling bit etc.

Details of Cost for : 100.00 Kg Unit Quantity

quint tonne

Rate

1.05 0.105

4250.00 77.87

Day Day

0.75 0.50

273.00 247.00

Day Day L.S.

1.00 1.00 19.76

273.00 247.00 1.49 Total: 5348.37

Add water charges @ 1% on

Add C.P & OH @15% on 5401.85 Cost for 100.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 62.12 Rs 62.10

Item Code: 16.20 Welded steel wire fabric fencing with posts of speci- fied material and of standard design.(cost of posts, welded steel wire fabric, painting, earth work in excavation and C.C. to be paid separately).

Code

0123 0124 0114 0102 0103

DSR-12

Details of Cost for : 36.00 Sqm Description Unit Quantity Details of csot for 30’metres i.e.30xl.20=36.00sqm Labour for fixing posts in line fixing and stretching - welded wire fabric : Mason 1st class Day 0.12 Mason 2nd class Day 0.12 Beldar Day 0.50 Blacksmith 1 st class Day 0.50 Blacksmith 2nd class Day 0.50

Rate

301.00 273.00 247.00 301.00 273.00

Page 652 of 2298

9999 9999

G.I. staple or binding wire Sundries

L.S. L.S.

53.82 53.82

Add water charges @ 1% on

1.49 1.49 Total: 639.76

Add C.P & OH @15% on 646.16 Cost for 36.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 20.64 Rs 20.65

Item Code: 16.21 Code

0126 9999

Description Details of cost for 6 letters 8 cm height LABOUR FOR ENGRAVING STONEMason (Ornamental work) Sundries

Details of Cost for : 48.00 units Unit Quantity

Day L.S.

0.38 6.76

Add water charges @ 1% on

Rate

301.00 1.49 Total: 124.45

Add C.P & OH @15% on 125.69 Cost for 48.00 units Rate per Units: Rate as per DSR-12:

Rs 3.01 Rs 3.00

Item Code: 16.22 P/F 15 x 15 x 90 Cm boundary stone of hard stone with top 30 Cm chisel dressed. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one stone 1151 Cost of stone 15x15x90cm with 30cm chisel dress each 1.00 LABOUR FOR FIXING 0114 Beldar Day 0.12 9999 Carriage to site L.S. 4.16 Add water charges @ 1% on

Rate 60.00 247.00 1.49 Total: 95.84

Add C.P & OH @15% on 96.80 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 111.32 Rs 111.30

Item Code: 16.23 P/F 15 cm dia at top, 20 cm at bottom and 90 cm high precast RCC 1 : 2 : 4 boundary stone. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one stone (i) Cement concrete 1.1.5:3 (l cement :1.5 course sand :3 graded stone aggregate 20mm nominal size) L/3 *A1+A2 sqrt(A1A2) = 0.825/3 x (0.09522² + 0.0752² + 0.75x0.095)x3.142 =0.0186 (A) Semi Circlel/2x4/ 3x22/7x(0.075)3=0.0010 –(B)/ 0.0196 (A+B) Say 0.02cum.

DSR-12

Rate

Page 653 of 2298

04.001.02

0114 0101 0123 0124 0128

05.022.01

05.009.01

0367 2209 0983 2261 0114 0101 9999 9999 0155 0115 0101 9999 9999 0114 9999

P/L CC excluding centering - All work up to plinth level: 1:1½:3 - Coarse sand, 20mmstone (ii) Extra for laying cement concerte in RCC work Beldar Bhishti Mason 1st class Mason 2nd class Mate (iii) M.S. reinforcement6mm dia. bar 5.99 metre =5.99x0.22 =1.32kg. Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi (iv) Centering and shuttering 1/2x3.142 (0.19+0.15)x0.825 =0.441 + 3.142/4(0.19)² =0028 1/2x4x3.142(0.075)² = 0.035 = 0.504 Say0.50sqm. Centering & shuttering including strutting, propping etc. Foundations, footings, bases o (v) 6mm cement plaster 1:3 (1 Cement :3 fine sand)1/2x3.142 (0.19+0.15)x0.825 =0.44 + 3.14/4 (0.19)² =0.028 1/2x4x3.142(0.075)² = 0.035 = 0.504 Say 0.50sqm. Cement Carriage of cement Fine sand Carriage of fine sand Labour for mortar Beldar Bhishti Hire and running charges of mixer Sundries Labour for plaster Mason Coolie Bhishti Extra for removing burr Scaffolding, sundries etc. (vi) Labour for fixing Beldar Carriage to site

0.02

4904.97

0.002 0.004 0.0008 0.0008 0.0008

247.00 260.00 301.00 273.00 260.00

1.32

56.77

0.50

166.88

tonne tonne cum cum

0.0018 0.0018 0.0385 0.0385

5000.00 77.87 640.00 87.60

Day Day L.S. L.S.

0.0027 0.0002 0.10 0.05

247.00 260.00 1.49 1.49

Day Day Day L.S. L.S.

0.026 0.038 0.046 0.68 0.60

287.00 247.00 260.00 1.49 1.49

Day L.S.

0.12 4.16

247.00 1.49 Total: 106.84

Day Day Day Day Day

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 107.91 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 380.58 Rs 380.55

Item Code: 16.24.1 P/F precast reinforced cement concrete 1 : 1.5 : 3 Km. stone as per standard design i/c. finishing smooth in 1 : 3. 35 x 111 x 25 cm size. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate

DSR-12

Page 654 of 2298

04.001.02

0114 0101 0123 0124 0128

05.022.01

05.009.01

0367 2209 0983 2261 0114 0101 9999 9999 0155 0115 0101 9999 9999 0114 9999

DSR-12

Details of cost for one stone (i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3 graded stone aggregate 20mm nominal size) in Kilometre stone 0.35x0.25x0.835m = 0.073 0.37x0.27x0.10m = 0.010 1/2x22/7x(0.175) x0.25m = 0.012 Total = 0.095cum Say 0.10 cum P/L CC excluding centering - All work up to plinth level: 1:1½:3 - Coarse sand, 20mmstone (ii) Extra for laying cement concrete in RCC work Beldar Bhishti Mason 1 st class Mason 2nd class Mate (iii) M.S. reinforcement0.10cum @48.06kg/cum. =4.806kg. Say 4.81kg. Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi (iv) Centering and shuttering(0.35+2x0.25)x0.835 = 0.710 sqm 0.35x0.25 = 0.088sqm (0.37+2x0.27)x0.10 = 0.091sqm 2x0.37x0.01 =.0.007 sqm 2x2x0.25x0.01=0.010sqm 1/2x3.142/4x(0.35)² = 0.048sqm 1/2x0.35x0.25x3.142 = 0.138sqm. = 1. 092sqm say 1.09 sqm of Centering & shuttering including strutting, propping etc. Foundations, footings, bases o (v) 6mm cement plaster 1:3 (1 Cement :3 fine sand)Qty. as per centering and shuttering = 1.092sqm 0.35x0.835 = 0.292sqm 0.37x0.10 = 0.037sqm 1/2x3.142/4x(0.35)² = 0.048sqm 2x0.37x0.01 = 0.007 sqm = 1.476 sqm Say 1.48 sqm Cement Carriage of cement Fine sand Carrige of fine sand Labour for mortar Beldar Bhishti Hire and running charges of mixer Sundries LABOUR FOR PLASTER Mason Coolie Bhishti Extra for removing burr Scaffolding, sundries etc. (VI) LABOUR FOR FIXING Beldar Carriage to site

0.10

4904.97

0.01 0.02 0.004 0.004 0.004

247.00 260.00 301.00 273.00 260.00

4.81

56.77

1.09

166.88

0.054 0.054 0.011 0.011

5000.00 77.87 640.00 87.60

Day Day L.S. L.S.

0.008 0.0007 0.03 0.13

247.00 260.00 1.49 1.49

Day Day Day L.S. L.S.

0.075 0.111 0.136 1.95 1.82

287.00 247.00 260.00 1.49 1.49

Day L.S.

0.20 13.52

247.00 1.49 Total:

Day Day Day Day Day

tonne tonne cum cum

Page 655 of 2298

Add water charges @ 1% except on [A]+[B]+[C] i.e on

455.06

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 459.61 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1474.01 Rs 1473.95

Item Code: 16.24.2 P/F precast reinforced cement concrete 1 : 1.5 : 3 Km. stone as per standard design i/c. finishing smooth in 1 : 3. 50 x 152.52 x 25 cm size. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one stone (i) Cement concrete 1:1.5:3 (1 cement: 1.5 Coarse sand :3 graded stone aggregate 20mm nominal size) 0.50x0.25x1.145m = 0.143cum. + 0.52x0.27x0.13m = 0.018cum. + l/2x22/7x(0.25)2x0.25m = 0.025cum. = 0.186 cum. Say0.19cum. 04.001.02 P/L CC excluding centering - All work up to plinth level: 1:1½:3 0.19 4904.97 - Coarse sand, 20mmstone (ii) Extra for laying cement concrete in RCC work 0114 Beldar Day 0.019 247.00 0101 Bhishti Day 0.038 260.00 0123 Mason 1st class Day 0.008 301.00 0124 Mason 2nd class Day 0.008 273.00 0128 Mate Day 0.008 260.00 (iii) M.S. reinforcement0.19cum @48.06kg/cum. =9.131kg. Say 9.13 kg. 05.022.01 Reinforcement for R.C.C. work all complete. -Upto plinth level 9.13 56.77 Mild steel and Medium Tensi (iv) Centering and shuttering(0.50+2x0.25)xl.l45 = 1.145 sqm l/2x(0.25)² x 3.142 = 0.098 3.142(0.25)x0.25=0.196 (0.52+2x0.27)x0.13 =0.138 2x0.52x0.01 =0.10 2x2x0.25x0.01 =0.010 1x0.50x0.25=0.125 = 1.722sqm. Say 1.72 sqm 05.009.01 Centering & shuttering including strutting, propping etc. 1.72 166.88 Foundations, footings, bases o (v) 6mm cement plaster 1:3 (1 Cement :3 fine sand)Qty. as per centering and shuttering = 1.722sqm. + 0.50x1.145 = 0.572 + 0.52x0.13 ,=_0.068sqm.+ l/2x(0.25)² x3.142 = 0.098 + 2x0.52x001 =0.010 = 2.470sqm Sq. 2.47 sqm. 0367 Cement tonne 0.09 5000.00 2209 Carriage of cement tonne 0.09 77.87 0983 Fine sand cum 0.20 640.00 2261 Carriage of fine sand cum 0.20 87.60 Labour for mortar 0114 Beldar Day 0.013 247.00

DSR-12

Page 656 of 2298

0101 9999 9999 0155 0115 0101 9999 9999 0114 9999

Bhishti Hire and running charges of mixer Sundries Labour for plaster Mason Coolie Bhishti Extra for removing burr Scaffolding, sundries etc. (vi) Labour for fixing Beldar Carriage to site

Day L.S. L.S.

0.001 0.52 0.26

260.00 1.49 1.49

Day Day Day L.S. L.S.

0.126 0.185 0.227 3.38 2.86

287.00 247.00 260.00 1.49 1.49

Day L.S.

0.20 13.52

247.00 1.49 Total: 848.12

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 856.60 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2722.37 Rs 2722.25

Item Code: 16.24.3 P/F precast reinforced cement concrete 1 : 1.5 : 3 Km. stone as per standard design i/c. finishing smooth in 1 : 3. 35 x 93.5 x 18 cm size. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one stone (i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3 graded stone aggregate 20mm nominal size) 0.35x0.18x0.835m = 0.0526 cum. + 0.37x0.20x0.10m = 0.0074 cum. = 0.060 cum. 04.001.02 P/L CC excluding centering - All work up to plinth level: 1:1½:3 0.06 4904.97 - Coarse sand, 20mmstone (ii) Extra for laying cement concrete in RCC work 0114 Beldar Day 0.006 247.00 0101 Bhishti Day 0.012 260.00 0123 Mason 1 st class Day 0.0024 301.00 0124 Mason 2nd class Day 0.0024 273.00 0128 Mate Day 0.0024 260.00 (iii) M.S. reinforcement0.06cum @48.06kg/cum. =2.8836 kg. Say 2.88 kg. 05.022.01 Reinforcement for R.C.C. work all complete. -Upto plinth level 2.88 56.77 Mild steel and Medium Tensi (iv) Centering and shuttering(0.35+2x0.18)x0.835 = 0.593 sqm (0.37+2x0.20)x0.10 = 0.077 sqm 2x0.35x0.18 = 0.126 sqm 2x0.37x0.01 =0.007sqm 2x2x0.18x0.01 =0.007sqm = 0.810 sqm 05.009.01 Centering & shuttering including strutting, propping etc. 0.81 166.88 Foundations, footings, bases o (v) 6mm cement plaster 1:3(1 Cement :3 fine sand)Qty. as per centering and shuttering = 0.810sqm 0.35x0.835 = 0.292sqm 0.37x0.10 =0.037sqm 2x0.37x0.01 =0.007sqm = 1.146 sqm Say 1.15sqm

DSR-12

Page 657 of 2298

0367 2209 0983 2261 0114 0101 9999 9999 0155 0115 0101 9999 9999 0114 9999

Cement Carriage of cement Fine sand Carriage of fine sand LABOUR FOR MORTAR Beldar Bhishti Hire and running charges of mixer Sundries LABOUR FOR PLASTER Mason Coolie Bhishti Extra for removing burr Scaffolding, sundries etc. (VI) LABOUR FOR FIXING Beldar Carriage to site

tonne tonne cum cum

0.042 0.042 0.009 0.009

5000.00 77.87 640.00 87.60

Day Day L.S. L.S.

0.006 0.0006 0.26 0.13

247.00 260.00 1.49 1.49

Day Day Day L.S. L.S.

0.058 0.086 0.105 1.56 1.30

287.00 247.00 260.00 1.49 1.49

Day L.S.

0.10 13.52

247.00 1.49 Total: 342.93

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 346.36 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 991.28 Rs 991.25

Item Code: 16.25 Surface dressing on new surf- ace with paving of A-90/S-90 using 2.25 Kg bitumen per Sqm with 1.65 Cum of stone chipping 13.2 mm n/s. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate Bitumen [email protected] per sqm. =225 kg = 0.225 tonne. 0309 Bitumen S-90 @ 2.25kg per sqm. =225kg. = 0.225tonne tonne 0.225 37000.00 2211 Carriage of bitumen tonne 0.225 87.60 Stone aggregate 13.2mm nominal size @1.65cum. per 100sqm. 2910 Stone chippings 13.2mm cum 1.65 1050.00 2202 Carriage of stone aggregate cum 1.65 87.60 0370 Steam coal for heating bitumen @2 qunital per tonne of quint 0.45 400.00 bitumen = 2x0.225=0.450q 2200 Carrige of steam coal tonne 0.045 100.11 Labour for cleaning the road surface, heating and spraying bitumen and aggregate (a) For cleaning: 0128 Mate Day 0.11 260.00 0114 Beldar Day 1.40 247.00 0115 Coolie Day 1.40 247.00 (b) For heating and spraying bitumen : 0130 Mistry Day 0.08 301.00 0138 Spray man Day 0.11 260.00 0114 Beldar Day 0.93 247.00 (c) For screening and spreading aggregate : 0128 Mate Day 0.11 260.00 0114 Beldar Day 0.93 247.00 0115 Coolie Day 1.55 247.00 (d) Consolidation Charges 0113 Chowkidar (at barriers for night watch and for road roller) Day 0.27 247.00

DSR-12

Page 658 of 2298

0101 0003 0001 0007 1235 9999 0364 0365 9999 9999

Bhishti Hire charges of road roller Hire charges for boiler Hire charges for tar sprayer unit Diesel for road roller @ 18 litres Carriage of diesel (e) Misc: Brushes etc. for cleaning, Wire bursh (with thick wire) Soft brush Brooms and gunny bags Sundries

Day Day Day Day litre L.S.

0.11 0.11 0.12 0.11 2.00 2.73

260.00 1500.00 800.00 300.00 41.29 1.49

each each L.S. L.S.

0.11 0.32 6.76 6.76

20.00 18.00 1.49 1.49 Total: 12554.04

Add water charges @ 1% on

Add C.P & OH @15% on 12679.58 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 145.82 Rs 145.80

Item Code: 16.26 Surface dressing on new surface in two coats with bitumen of grade A-90/S-90. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate 1.8kg/sqm.=180kg.=0.18 tonne (a) For cleaning: 2211 Carriage of bitumen tonne 0.18 87.60 (b) For heating and spraying bitumen : 2910 Stone chippings 13.2mm nominal size @1.5cum. per 100sqm. cum 1.50 1050.00

2202 0370 2200

0115

0130 0138 0114

0128 0114 0309 0115 0003 0113

DSR-12

(c) For screening and spreading aggregate : Carriage of stone aggregate cum (d) Consolidation Charges Steam coal for heating bitumen @2 qunital per tonne quint (e) Misc: Carriage of steam coal Labour for cleaning the road surface, tonne heating and spraying bitumen Second Coat sqm.= l 10kg.=0.11 tonne tonne of bitumen Labour for cleaning the road surface, heating Coolie Day and spraying bitumen and aggregate (a) For cleaning and brushing loose chips: Mistry Day (b) For heating and spraying bitumen : Sprayman Day (c) For screening and spreading aggregate : Beldar Day (d) Consolidation Charges road roller) Mate Day (e) Misc: Beldar Day thick wire) Bitumen S-90/A-90 @ tonne Coolie Day Hire charges of road roller Day Chowkidar Day

1.50

87.60

0.36

400.00

0.036

100.11

1.40

247.00

0.08

301.00

0.11

260.00

1.38

247.00

0.27

260.00

0.85

247.00

0.18 0.85 0.11 0.11

37000.00 247.00 1500.00 247.00

Page 659 of 2298

0001 0101 0007 1235 0364 0365 9999 0309 2911 2211 2202 9999 0370 9999 2200 0003 0007 1235 0001 0364 0365 0114 0128 0115 0128 0130 0138 0114 0128 0114 0115 0113 0101 9999 9999

Hire charges for boiler Bhishti Hire charges for tar sprayer unit Diesel for road roller @ 18 litres/day Brushes etc. for cleaning, Wire brush thick wire) Soft brush Details of cost for 100sqm Carriage of diesel Bitumen S-90/A-90 @ 1.10kg per Stone chippings 10mm/11.2mm Carriage of bitumen Carriage of aggregate Brooms and gunny bags Steam coal for heating bitumen @2 qunital per Sundries Carriage of steam coal Hire charges of road roller Hire charges for tar sprayer unit Diesel for road roller @ 18 litres Hire charges of boiler Brushes etc. for cleaning, Wire bursh (with Soft brushes Beldar Mate Coolie Mate Mistry Sprayman Beldar Mate Belder Coolie Chowkidar(at barrier for night watch and for Bhishti Carriage of diesel Sundries

Day Day Day litre each each

0.12 0.11 0.11 2.00 0.11 0.32

800.00 260.00 300.00 41.29 20.00 18.00

L.S. tonne cum tonne cum L.S. quint L.S. tonne Day Day litre Day each each Day Day Day Day Day Day Day Day Day Day Day Day L.S. L.S.

2.73 0.11 1.00 0.11 1.00 6.76 0.22 16.38 0.022 0.06 0.07 1.08 0.06 0.03 0.09 1.40 0.06 0.97 0.11 0.05 0.07 0.75 0.07 0.62 0.62 0.15 0.06 1.43 9.49

1.49 37000.00 1050.00 87.60 87.60 1.49 400.00 1.49 100.11 1500.00 300.00 41.29 800.00 20.00 18.00 247.00 260.00 247.00 260.00 301.00 260.00 247.00 260.00 247.00 247.00 247.00 260.00 1.49 1.49 Total: 16992.81

Add water charges @ 1% on

Add C.P & OH @15% on 17162.74 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 197.37 Rs 197.35

Item Code: 16.27 Surface dressing on old surface with hot bitumen of grade A-90/S-90. Code 0309 2911 2211 2202 0370 2200

DSR-12

Description

Details of Cost for : 100.00 Sqm Unit Quantity

MATERIAL: Bitumen 1.95kg./sqm.= 195kg. or 0.195t tonne Stone chippings 11.2mm nominal size @ cum 1.50cum. per 100 sqm. Carriage of bitumen tonne Carriage of aggregate cum Steam coal for heating bitumen @2 quintal per tonne of quint bitumen Carriage of steam coal tonne

Rate

0.195 1.50

37000.00 1050.00

0.195 1.50 0.39

87.60 87.60 400.00

0.039

100.11

Page 660 of 2298

0128 0114 0115 0130 0138 0114 0128 0114 0115 0113 0101 0003 1235 9999 0007 0001 0364 0365 9999 9999

Labour for cleaning the road surface, heating and spraying bitumen and aggregate etc. (a) For cleaning: Mate Beldar Coolie (b) For heating and spraying bitumen : Mistry Sprayman Beldar (c) For screening and spreading aggregate : Mate Beldar Coolie (d) Consolidation Charges Chowkidar Bhishti Hire charges of road roller Diesel for road roller @ 18 litres per day Carriage of diesel Hire charges for tar sprayer Hire charges of boiler (e) Misc: Brushes etc. for cleaning, Wire bursh (with thick wire) Soft brush Brooms and gunny bags Sundries

Day Day Day

0.06 0.49 0.97

260.00 247.00 247.00

Day Day Day

0.05 0.06 0.69

301.00 260.00 247.00

Day Day Day

0.66 0.51 0.51

260.00 247.00 247.00

Day Day Day litre L.S. Day Day

0.15 0.06 0.06 1.08 1.43 0.06 0.06

247.00 260.00 1500.00 41.29 1.49 300.00 800.00

each each L.S. L.S.

0.05 0.12 2.73 5.33

20.00 18.00 1.49 1.49 Total: 10369.76

Add water charges @ 1% on

Add C.P & OH @15% on 10473.46 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 120.44 Rs 120.45

Item Code: 16.28.1 Surface dressing one coat on new surface with bitumen : Using bitumen emulsion (min. 50 % bitumen content-RS grade conforming to IS :8837). Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate 0310 Bitumen emulsion tonne 0.195 28500.00 2211 Carriage of bitumen tonne 0.195 87.60 2910 Stone chippings 13.2mm @1.50 cum. per 100 sqm. = cum 1.50 1050.00 1.50cum. 2202 Carriage of stone aggregate cum 1.50 87.60 Labour for cleaning the road surface, heating and spraying bitumen and aggregate : (a) For cleaning: 0128 Mate Day 0.11 260.00 0114 Beldar Day 1.40 247.00 0115 Coolie Day 1.40 247.00 (b) For Spraying bitumen emulsion : 0130 Mistry Day 0.07 301.00 0138 Sprayman Day 0.10 260.00 0114 Beldar Day 1.00 247.00 (c) For screening and spreading aggregate : 0128 Mate Day 0.11 260.00 0114 Beldar Day 0.85 247.00

DSR-12

Page 661 of 2298

0115 0113 0101 0003 0007 1235 9999 0364 0365 9999 9999

Coolie (d) Consolidation Charges Chowkidar Bhishti Hire charges of road roller Hire charges for tar sprayer Diesel for road roller @ 18 litres per day Carriage of diesel (e) Misc: Brushes etc. for cleaning, Wire bursh (with thick wire) Soft brush Brooms and gunny bags Sundries

Day

0.85

247.00

Day Day Day Day litre L.S.

0.27 0.27 0.11 0.10 2.00 2.73

247.00 260.00 1500.00 300.00 41.29 1.49

each each L.S. L.S.

0.11 0.32 6.76 9.49

20.00 18.00 1.49 1.49 Total: 9194.46

Add water charges @ 1% on

Add C.P & OH @15% on 9286.40 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 106.79 Rs 106.80

Item Code: 16.29.1 Surface dressing one coat on old surface with bitumen : Using bitumen emulsion (min. 50 % bitumen content-RS grade conforming to IS : 8837). Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate 0310 Bitumen emulsion @1.22 kg per Sqm. =122 kg. or 0.122 tonne tonne 0.122 28500.00 2211 2911 2202

0128 0114 0115 0130 0138 0114 0128 0114 0115 0113 0101 0003 0007 1235 9999 0364 0365 9999 9999

DSR-12

Carriage of bitumen emulsion Stone chippings 11.2mm nominal size @ 1.10cum. per 100 sqm. Carriage of stone chippings Labour for cleaning the road surface, heating and spraying bitumen and aggregate : (a) For cleaning: Mate Beldar Coolie (b) For Spraying bitumen emulsion : Mistry Sprayman Beldar (c) For screening and spreading aggregate : Mate Beldar Coolie (d) Consolidation Charges Chowkidar Bhishti Hire charges of road roller Hire charges for tar sprayer Diesel for road roller @ 18 litres per day Carriage of diesel (e) Misc: Brushes etc. for cleaning, Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

tonne cum

0.122 1.10

87.60 1050.00

cum

1.10

87.60

Day Day Day

0.06 0.49 0.97

260.00 247.00 247.00

Day Day Day

0.05 0.06 0.63

301.00 260.00 247.00

Day Day Day

0.07 0.62 0.62

260.00 247.00 247.00

Day Day Day Day litre L.S.

0.15 0.15 0.06 0.06 1.08 1.43

247.00 260.00 1500.00 300.00 41.29 1.49

each each L.S. L.S.

0.11 0.32 2.73 5.33

20.00 18.00 1.49 1.49

Page 662 of 2298

Add water charges @ 1% on

Total: 5876.75

Add C.P & OH @15% on 5935.52 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 68.26 Rs 68.25

Item Code: 16.30.1 P/L applying tack coat using hot straight run bitumen of grade 80/100 : On W.B.M. @ 0.75 Kg/Sqm. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate 2916 Bitumen 80/100 tonne 0.075 37500.00 2211 Carriage of bitumen tonne 0.075 87.60 0370 Steam coal quint 0.15 400.00 2200 Carriage of steam coal tonne 0.015 100.11 Materials for cleaning the road surface : 0364 Wire brush (with thick wire) each 0.05 20.00 0365 Soft brush each 0.12 18.00 9999 Gunny bags L.S. 7.80 1.49 0007 Spray unit Day 0.03 300.00 9999 Sundries L.S. 9.10 1.49 LABOUR: (a) For cleaning: 0128 Mate Day 0.06 260.00 0114 Beldar Day 1.46 247.00 (b) For heating bitumen: 0114 Beldar Day 0.19 247.00 (c) For applying tack coat: 0114 Beldar Day 0.47 247.00 Total: Add water charges @ 1% on 3457.15 Add C.P & OH @15% on 3491.72 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 40.15 Rs 40.15

Item Code: 16.30.2 P/L applying tack coat using hot straight run bitumen of grade 80/100 : On bituminous surface @ 0.50 Kg/Sqm.

Code 2916 2211 0370 2200 0364 0365 9999 0007 9999

0128

DSR-12

Description Bitumen 80/100 Carriage of bitumen Steam coal Carriage of steam coal Materials for cleaning the road surface : Wire brush (with thick wire) Soft brush Gunny bags Spray unit Sundries LABOUR: (a) For cleaning: Mate

Details of Cost for : 100.00 Sqm Unit Quantity Rate tonne 0.05 37500.00 tonne 0.05 87.60 quint 0.10 400.00 tonne 0.01 100.11 each each L.S. Day L.S.

0.05 0.12 7.80 0.03 7.80

20.00 18.00 1.49 300.00 1.49

Day

0.06

260.00

Page 663 of 2298

0114 0114 0114

Beldar (b) For heating bitumen: Beldar (c) For applying tack coat: Beldar

Day

1.46

247.00

Day

0.19

247.00

Day

0.47

247.00 Total: 2495.02

Add water charges @ 1% on

Add C.P & OH @15% on 2519.97 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 28.98 Rs 29.00

Item Code: 16.31.1.1 P/A tack coat using bitumen emulsion , using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom - With rapid setting bitumen emulsion - On W.B.M / W.M.M. @ 0.4kg/sqm

Code 7382 2211 0075 0058 0061 0128 0114

Description

Details of Cost for : 3500.00 Sqm Unit Quantity

A) MATERIAL: Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887- tonne 1995 Carraige of Tar bitumen tonne B) MACHINERY Road sweeper (Mechamical Broom) @ 1250 sqm per hour hour Air compressor Emulsion Pressure Distributor @ 1750 sqm per hour (C) LABOUR : Mate Beldar

Rate

1.40

27700.00

1.40

87.60

2.80

360.00

hour hour

2.80 2.00

325.00 800.00

Day Day

0.08 2.00

260.00 247.00 Total: 42935.44

Add water charges @ 1% on

Add C.P & OH @15% on 43364.79 Cost for 3500.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 14.25 Rs 14.25

Item Code: 16.31.1.2 P/A tack coat using bitumen emulsion , using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom - With rapid setting bitumen emulsion - On bituminous surface @ 0.25kg/sqm

Code 7382 2211 0075 0058 0061 0128

DSR-12

Description

Details of Cost for : 3500.00 Sqm Unit Quantity

A) MATERIAL: Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887- tonne 1995 Carraige of Tar bitumen tonne B) MACHINERY Road sweeper (Mechamical Broom) @ 1250 sqm per hour hour Air compressor Emulsion Pressure Distributor @ 1750 sqm per hour (C) LABOUR : Mate

Rate

0.875

27700.00

0.875

87.60

2.80

360.00

hour hour

2.80 2.00

325.00 800.00

Day

0.08

260.00

Page 664 of 2298

0114

Beldar

Day

2.00

Add water charges @ 1% on

247.00 Total: 28346.95

Add C.P & OH @15% on 28630.42 Cost for 3500.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 9.41 Rs 9.40

Item Code: 16.31.2.1 P/A tack coat using bitumen emulsion , using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom - With medium setting bitumen emulsion - On W.B.M / W.M.M. @ 0.4kg/sqm

Code 7742 2211 0075 0058 0061 0128 0114

Description

Details of Cost for : 3500.00 Sqm Unit Quantity

A) MATERIAL: Bitumen emulsion medium setting (M.S.) confirming to IS : tonne 8887-1995 Carraige of Tar bitumen tonne B) MACHINERY Road sweeper (Mechamical Broom) @ 1250 sqm per hour hour Air compressor Emulsion Pressure Distributor @ 1750 sqm per hour (C) LABOUR : Mate Beldar

Rate

1.40

28200.00

1.40

87.60

2.80

360.00

hour hour

2.80 2.00

325.00 800.00

Day Day

0.08 2.00

260.00 247.00 Total: 43635.44

Add water charges @ 1% on

Add C.P & OH @15% on 44071.79 Cost for 3500.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 14.48 Rs 14.50

Item Code: 16.31.2.2 P/A tack coat using bitumen emulsion , using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom -With medium setting bitumen emulsion - On bituminous surface @ 0.25kg/sqm

Code 7742 2211 0075 0058 0061 0128 0114

Description

Details of Cost for : 3500.00 Sqm Unit Quantity

A) MATERIAL: Bitumen emulsion medium setting (M.S.) confirming to IS : tonne 8887-1995 Carraige of Tar bitumen tonne B) MACHINERY Road sweeper (Mechamical Broom) @ 1250 sqm per hour hour Air compressor Emulsion Pressure Distributor @ 1750 sqm per hour (C) LABOUR : Mate Beldar

0.875

28200.00

0.875

87.60

2.80

360.00

hour hour

2.80 2.00

325.00 800.00

Day Day

0.08 2.00

260.00 247.00 Total: 28784.45

Add water charges @ 1% on

DSR-12

Rate

Page 665 of 2298

Add C.P & OH @15% on 29072.29 Cost for 3500.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 9.55 Rs 9.55

Item Code: 16.32.1 2 Cm premix carpet surfacing with 1.8 Cum and 0.90 Cum of stone chippings of 13.2 mm size and 11.2 mm size and 52 kg and 56 kg of hot bitumen per Cum of stone: With paving Asphalt 80/100 @ 70 grams per kg of asphalt.

Code

2916 2211 2914 2342 2910 2911 2202 0370 2200

0128 0114 0115 0114 0130 0114 0113 0101 0003 1235 9999 0001 0023 0364 0365 9999 9999

Details of Cost for : 100.00 Sqm Unit Quantity

Description Asphalt 80/100 (i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of 13.2mm nominal size chippings. (ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum. of 11.2mm nominal size chippings. Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne. Carriage of bitumen Solvent 70gms/kg. for 0.144 t = 10.08kg. Carriage of solvent Stone chippings 13.2mm nominal size @1.80cum. per 100 sqm. Stone chippings 11.2mm nominal size @0.90cum. per 100 sqm. Carriage of aggregate Steam coal for heating bitumen @ 2 qunitals per tonne of bitumen = 2x0.144=0.288q Carriage of steam coal Labour for cleaning the road surface, heating and spraying bitumen and aggregate : (a) For cleaning: Mate Beldar Coolie (b) For heating bitumen: Beldar (c) For screening and spreading premixed aggregate : Mistry Beldar (d) Consolidation Charges Chowkidar(at barrier for night watch and for road roller) Bhishti Hire charges of road roller Diesel for road roller @ 18 litres per day Carriage of diesel Hire charges of boiler Hire charges of Bitumen Concrete Mixer (e) Misc: Brushes etc. for cleaning, Wire bursh (with thick wire) Soft brush Brooms and gunny bags Sundries

tonne tonne kilog quint cum

Rate

0.144 0.144 10.08 0.10 1.80

37500.00 87.60 23.00 8.76 1050.00

cum

0.90

1050.00

cum quint

2.70 0.288

87.60 400.00

tonne

0.0288

100.11

Day Day Day

0.08 1.40 1.40

260.00 247.00 247.00

Day

0.57

247.00

Day Day

0.19 5.00

301.00 247.00

Day Day Day litre L.S. Day Day

0.27 0.11 0.11 2.00 2.73 0.13 0.04

247.00 260.00 1500.00 41.29 1.49 800.00 4000.00

each each L.S. L.S.

0.11 0.32 6.76 9.49

20.00 18.00 1.49 1.49 Total: 11623.42

Add water charges @ 1% on

Add C.P & OH @15% on 11739.65 Cost for 100.00 Sqm

DSR-12

Page 666 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 135.01 Rs 135.00

Item Code: 16.32.2 2 Cm premix carpet surfacing with 1.8 Cum and 0.90 Cum of stone chippings of 13.2 mm size and 11.2 mm size and 52 kg and 56 kg of hot bitumen per Cum of stone: With paving Asphalt 60/70 with no solvent.

Code

7309 2211 2910 2911 2202 0370 2200

0128 0114 0115 0114 0130 0114 0113 0101 0003 1235 9999 0001 0023 0364 0365 9999 9999

Details of Cost for : 100.00 Sqm Unit Quantity

Description Asphalt 60/70 (i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of 13.2mm nominal size chippings. (ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum. of 11.2mm nominal size chippings. Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne. Carriage of bitumen Stone chippings 13.2mm nominal size @1.80cum. per 100sqm. Stone chippings 11.2mm nominal size @0.90cum. per 100sqm. Carriage of aggregate Steam coal for heating of bitumen @2 quintals per tonne of bitumen =2x0.144=0.288q Carriage of steam coal Labour for cleaning the road surface, heating and spraying bitumen and aggregate : (a) For cleaning: Mate Beldar Coolie (b) For heating bitumen: Beldar (c) For screening and spreading premixed aggregate : Mistry Beldar (d) Consolidation Charges Chowkidar(at barrier for night watch and for road roller) Bhishti Hire charges of road roller Diesel for road roller @ 18 litres per day Carriage of diesel Hire charges of boiler Hire charges of Bitumen Concrete Mixer (e) Misc: Brushes etc. for cleaning, Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

tonne tonne cum

Rate

0.144 0.144 1.80

38500.00 87.60 1050.00

cum

0.90

1050.00

cum quint

2.70 0.288

87.60 400.00

tonne

0.0288

100.11

Day Day Day

0.08 1.40 1.40

260.00 247.00 247.00

Day

0.57

247.00

Day Day

0.19 5.00

301.00 247.00

Day Day Day litre L.S. Day Day

0.27 0.11 0.11 2.00 2.73 0.13 0.04

247.00 260.00 1500.00 41.29 1.49 800.00 4000.00

each each L.S. L.S.

0.11 0.32 6.76 9.49

20.00 18.00 1.49 1.49 Total: 11534.70

Add water charges @ 1% on

Add C.P & OH @15% on 11650.05 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 133.98 Rs 134.00

Item Code: 16.32.3

DSR-12

Page 667 of 2298

2 Cm premix carpet surfacing with 1.8 Cum and 0.90 Cum of stone chippings of 13.2 mm size and 11.2 mm size and 52 kg and 56 kg of hot bitumen per Cum of stone: With Refinery Modified Bitumen CRMB 55 conforming to IRC : SP : 53-1999.

Code

7739 2211 2914 2342 2910 2911 2202 0370 2200

0128 0114 0115 0114 0130 0114 0113 0101 0003 1235 9999 0001 0023 0364 0365 9999 9999

Details of Cost for : 100.00 Sqm Unit Quantity

Description Asphalt 80/100 (i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of 13.2mm nominal size chippings. (ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum. of 11.2mm nominal size chippings. Modified Bitumen CRMB - 55 (Refinary produced) :52xl.8+56x0.9=144kg. or 0.144 tonne. Carriage of bitumen Solvent 70gms/kg. for 0.144 t = 10.08kg. Carriage of solvent Stone chippings 13.2mm nominal size @1.80cum. per 100sqm. Stone chippings 11.2mm nominal size @0.90cum. per 100sqm. Carriage of aggregate Steam coal for heating bitumen @ 2 quintals per tonne of bitumen = 2x0.144=0.288q Carriage of steam coal Labour for cleaning the road surface, heating and spraying bitumen and aggregate : (a)For cleaning: Mate Beldar Coolie (b)For heating bitumen: Beldar (c)For screening and spreading premixed aggregate : Mistry Beldar (d)Consolidation Charges Chowkidar(at barrier for night watch and for road roller) Bhishti Hire charges of road roller Diesel for road roller @ 18 litres per day Carriage of diesel Hire charges of boiler Hire charges of Bitumen Concrete Mixer (e)Misc: Brushes etc. for cleaning, Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

Rate

Tonne

0.144

38500.00

tonne kilog quint cum

0.144 10.08 0.10 1.80

87.60 23.00 8.76 1050.00

cum

0.90

1050.00

cum quint

2.70 0.288

87.60 400.00

tonne

0.0288

100.11

Day Day Day

0.08 1.40 1.40

260.00 247.00 247.00

Day

0.57

247.00

Day Day

0.19 5.00

301.00 247.00

Day Day Day litre L.S. Day Day

0.27 0.11 0.11 2.00 2.73 0.13 0.04

247.00 260.00 1500.00 41.29 1.49 800.00 4000.00

each each L.S. L.S.

0.11 0.32 6.76 9.49

20.00 18.00 1.49 1.49 Total: 11767.42

Add water charges @ 1% on

Add C.P & OH @15% on 11885.09 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 136.68 Rs 136.70

Item Code: 16.33.1

DSR-12

Page 668 of 2298

2.5 Cm premix carpet surfacing with 2.25 Cum and 1.12 Cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 Sqm and 52 Kg and 56 Kg of hot bitumen :- With paving Asphalt 80/100 @ 70 grams per kg of asphalt.

Code

2916 2914 2211 2342 2910 2911 2202 0370 2200

0128 0114 0115 0114 0130 0114 0113 0101 0003 1235 9999 0001 0023 0364 0365 9999 9999

Details of Cost for : 100.00 Sqm Unit Quantity

Description Paving Asphalt 80/100' (i) Hot bitumen @52kg.per cum. of stone chippings @2.25cum. of 13.2mm nominal size chippings. (ii) Hot bitumen @56kg. per cum. of aggregate @ 1.12cum. of 11.2mm nominal size. Bitumen :52x2.25+56x1.12= 180kg. Solvent 0.07x180=12.60kg. Carriage of bitumen Carriage of solvent Stone chippings 13.2mm nominal size @1.80cum. per 100 sqm. Stone chippings 11.2mm nominal size @0.90cum. per 100 sqm. Carriage of aggregate 2.25+1.12=3.37 cum. Steam coal for heating of bitumen @2 quintals per tonne of bitumen =2x0.18=0.36q Carriage of steam coal Labour for cleaning the road surface, heating and spraying bitumen and aggregate : (a) For cleaning: Mate Beldar Coolie (b) For heating bitumen: Beldar (c) For screening and spreading premixed aggregate : Mistry Beldar (d) Consolidation Charges Chowkidar Bhishti Hire charges of road roller Diesel for road roller @ 18 litres Carriage of diesel Hire charges of boiler Hire charges of Bitumen Concrete Mixer (e) Misc: Brushes etc. for cleaning, Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

tonne kilog tonne quint cum

Rate

0.18 12.60 0.18 0.126 2.25

37500.00 23.00 87.60 8.76 1050.00

cum

1.12

1050.00

cum quint

3.37 0.36

87.60 400.00

tonne

0.036

100.11

Day Day Day

0.08 1.40 1.40

260.00 247.00 247.00

Day

0.71

247.00

Day Day

0.19 6.25

301.00 247.00

Day Day Day litre L.S. Day Day

0.27 0.11 0.11 2.00 2.73 0.15 0.04

247.00 260.00 1500.00 41.29 1.49 800.00 4000.00

each each L.S. L.S.

0.11 0.32 6.76 9.49

20.00 18.00 1.49 1.49 Total: 14185.80

Add water charges @ 1% on

Add C.P & OH @15% on 14327.66 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 164.77 Rs 164.75

Item Code: 16.33.2 2.5 Cm premix carpet surfacing with 2.25 Cum and 1.12 Cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 Sqm and 52 Kg and 56 Kg of hot bitumen :- With paving Asphalt 60/70 with no solvent.

DSR-12

Page 669 of 2298

Code

7309 2211 2910 2911 2202 0370 2200

0128 0114 0115 0114

0130 0114 0113 0101 0003 1235 9999 0001 0023 0364 0365 9999 9999

Details of Cost for : 100.00 Sqm Unit Quantity

Description Paving Asphalt 60/70 (i) Hot bitumen @52kg.per cum. of stone chippings @2.25cum. of 13.2mm nominal size (ii) Hot bitumen @56kg. per cum. of stone aggregate @ 1.12cum. of 11.2mm nominal size Bitumen :52x2.25+50xl. 12= 180kg Carriage of bitumen Stone chippings 13.2mm nominal size @2.25cum. per 100sqm. Stone chippings 11.2mm nominal size @1.12cum. per 100sqm. Carriage of aggregate 2.25+1.12=3.37 cum. Steam coal for heating of bitumen @2 quintals per tonne of bitumen =2x0.18=0.36q Carriage of steam coal Labour for cleaning the road surface, heating and spraying bitumen and aggregate : (a) For cleaning : Mate Beldar Coolie (b) For heating bitumen: Beldar(1.05x0.18)/0.267 = 0.71 nos. (c) For cleaning, mixing and spreading pre-mix aggregate : Mistry Beldar (d) Consolidation Charges Chowkidar Bhishti Hire charges of road roller Diesel for road roller @ 18 litres per day Carriage of diesel Hire charges of boiler Hire charges of Bitumen Concrete Mixer (e) Misc: Brushes etc. for cleaning, Wire bursh (with thick wire) Soft brush Brooms and gunny bags Sundries

Rate

tonne tonne cum

0.18 0.18 2.25

38500.00 87.60 1050.00

cum

1.12

1050.00

cum quint

3.37 0.36

87.60 400.00

tonne

0.036

100.11

Day Day Day

0.08 1.40 1.40

260.00 247.00 247.00

Day

0.71

247.00

Day Day

0.19 6.25

301.00 247.00

Day Day Day litre L.S. Day Day

0.27 0.11 0.11 2.00 2.73 0.15 0.04

247.00 260.00 1500.00 41.29 1.49 800.00 4000.00

each each L.S. L.S.

0.11 0.32 6.76 9.49

20.00 18.00 1.49 1.49 Total: 14074.90

Add water charges @ 1% on

Add C.P & OH @15% on 14215.65 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 163.48 Rs 163.50

Item Code: 16.33.3 2.5 Cm premix carpet surfacing with 2.25 Cum and 1.12 Cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 Sqm and 52 Kg and 56 Kg of hot bitumen :- With Refinery Modified Bitumen CRMB 55 conforming to IRC : SP : 53-1999.

Code

Description

Details of Cost for : 100.00 Sqm Unit Quantity

Rate

Paving Asphalt 80/100

DSR-12

Page 670 of 2298

7739 2914 2211 2342 2910 2911 2202 0370 2200

0128 0114 0115 0114 0130 0114 0113 0101 0003 1235 9999 0001 0023 0364 0365 9999 9999

(i) Hot bitumen @52kg.per cum. of stone chippings @2.25cum. of 13.2mm nominal size chippings. (ii) Hot bitumen @56kg. per cum. of aggregate @1.12cum. of 11.2mm nominal size. Modified Bitumen CRMB - 55 (Refinery produced) :52x2.25+56xl.l2=180kg. Solvent 0.07x180=12.60kg. Carriage of bitumen Carriage of solvent Stone chippings 13.2mm nominal size @2.25 cum. per 100sqm. Stone chippings 11.2mm nominal size @1.12 cum. per lOOsqm. Carriage of aggregate 2.25+1.12=3.37 cum. Steam coal for heating of bitumen @2 quintals per tonne of bitumen =2x0.18=0.36q Carriage of steam coal Labour for cleaning the road surface, heating and spraying bitumen and aggregate : (a)For cleaning: Mate Beldar Coolie (b)For heating bitumen: Beldar (c)For screening and spreading premixed aggregate : Mistry Beldar (d)Consolidation Charges Chowkidar Bhishti Hire charges of road roller Diesel for road roller @ 18 litres Carriage of diesel Hire charges of boiler Hire charges of Bitumen Concrete Mixer (e) Misc: Brushes etc. for cleaning, Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

Tonne

0.18

38500.00

kilog tonne quint cum

12.60 0.18 0.126 2.25

23.00 87.60 8.76 1050.00

cum

1.12

1050.00

cum quint

3.37 0.36

87.60 400.00

tonne

0.036

100.11

Day Day Day

0.08 1.40 1.40

260.00 247.00 247.00

Day

0.71

247.00

Day Day

0.19 6.25

301.00 247.00

Day Day Day litre L.S. Day Day

0.27 0.11 0.11 2.00 2.73 0.15 0.04

247.00 260.00 1500.00 41.29 1.49 800.00 4000.00

each each L.S. L.S.

0.11 0.32 6.76 9.49

20.00 18.00 1.49 1.49 Total: 14365.80

Add water charges @ 1% on

Add C.P & OH @15% on 14509.46 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 166.86 Rs 166.85

Item Code: 16.34 2 Cm premix carpet surfacing with 2.4Cum of stonechippings 11.2 mm nominal size per 100 Sqm and bitumen emulsion (medium setting min. 65 % bitumen contents) complying with IS: 8887-1995.

Code 7742 2211

DSR-12

Description Bitumen emulsion M.S. @96kg per cum. of aggregate 96x2.4=230kg =0.230t Carriage of bitumen emulsion

Details of Cost for : 100.00 Sqm Unit Quantity tonne tonne

0.23 0.23

Rate 28200.00 87.60

Page 671 of 2298

2911 2202

0130 0114 0113 0101 0003 1235 9999 0023 9999

Stone aggregate 11.2mm nominal size @ 2.4cum. per 100 cum sqm. Carriage of stone aggregate cum LABOUR (a)For mixing and spreading premix aggregate : Mistry Day Beldar Day (b) Consolidation Charges Chowkidar Day Bhishti Day Hire charges of road roller Day Diesel for road roller @ 18 litres/day litre Carriage of diesel L.S. Hire charges of Bitumen Concrete Mixer Day Sundries L.S.

2.40

1050.00

2.40

87.60

0.19 3.54

301.00 247.00

0.27 0.11 0.11 2.00 2.73 0.04 9.49

247.00 260.00 1500.00 41.29 1.49 4000.00 1.49 Total: 10689.04

Add water charges @ 1% on

Add C.P & OH @15% on 10795.93 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 124.15 Rs 124.15

Item Code: 16.35 2.5Cm premix carpet surfacing with 3.0Cum of stonechippings 10 mm nominal size per 100 Sqm and bitumen emulsion (medium setting min. 65 % bitumen contents) complying with IS: 8887-1995.

Code 7742 2211 2911 2202

0130 0114 0113 0101 0003 1235 9999 9999

Details of Cost for : 100.00 Sqm Description Unit Quantity Rate Bitumen emulsion M.S. @96kg per cum. of aggregate 96x3 = 288 kg = 0.2881 tonne 0.288 28200.00 Carriage of bitumen emulsion tonne 0.288 87.60 Stone aggregate 10 mm nominal size @ 3.00 cum. per 100 cum 3.00 1050.00 sqm. Carriage of stone aggregate cum 3.00 87.60 LABOUR (a)For mixing and spreading premix aggregate: Mistry Day 0.19 301.00 Beldar Day 4.10 247.00 (b)Consolidation Charges Chowkidar Day 0.27 247.00 Bhishti Day 0.11 260.00 Hire charges of road roller Day 0.11 1500.00 Diesel for road roller @ 18 litres/day litre 2.00 41.29 Carriage of diesel L.S. 2.73 1.49 Sundries L.S. 9.49 1.49 Total: Add water charges @ 1% on 12990.60 Add C.P & OH @15% on 13120.51 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 150.89 Rs 150.90

Item Code: 16.36.1

DSR-12

Page 672 of 2298

P/L bitumen Penetration Maca- dam with hard stone aggregate with bitumen of suitable penetration grade : For 50 mm compacted thickness With paving asphalt 80/100 @ 50 kg/10 Sqm. Details of Cost for : 370.00 Sqm Code Description Unit Quantity Rate (A) MATERIAL: Taking 40mm = 45% 20mm = 44% 11.2mm = 8% Stone dust = 3% 0293 Stone aggregate 40mm (one size) cum 9.99 950.00 0295 Stone aggregate 20mm (one size) cum 9.77 1050.00 0297 Stone aggregate 11.2mm (one size) cum 1.78 1050.00 1159 Stone dust cum 0.60 925.00 Key aggregate 0295 Stone aggregate 20mm (one size) cum 2.33 1050.00 0296 Stone aggregate 13.2mm (one size) cum 2.66 1050.00 1159 Stone dust cum 0.56 925.00 2206 Carriage of stone aggregate 40mm cum 9.99 95.22 2202 Carriage of stone aggregate 20mm cum 12.10 87.60 2202 Carriage of stone aggregate 13.2/11.2mm cum 4.44 87.60 2267 Carriage of stone dust. cum 1.16 87.60 Bitumen 80/100 @ 50kg/10 sqm. 2916 Bitumen 80/100 grade tonne 1.85 37500.00 2211 Carriage of bitumen tonne 1.85 87.60 (B) LABOUR: 0114 Beldar for spreading stone metal Day 16.67 247.00 0114 Beldar for hand packing Day 5.33 247.00 0114 Beldar dry rolling Day 2.67 247.00 0114 Bajri spreader Day 1.33 247.00 0138 Sprayer Day 0.67 260.00 0114 Beldar for spreading key aggregate Day 1.33 247.00 0114 Beldar for spraying bitumen Day 6.67 247.00 0114 Beldar of power roller Day 0.67 247.00 0128 Mate Day 1.77 260.00 (C) MACHINERY : 0001 Bitumen boiler oil fed capacity 1500 lit with Day 0.45 800.00 spray unit 0003 Road roller (8 to 10 tonne) Day 0.61 1500.00 9999 Misc. items as spray nozzle, joint paper, coconut oil, country L.S. 351.00 1.49 soap etc. (D) FUEL: (i) Diesel for boiler @ 10 litres per hour = 40.00 lit + (ii) Diesel for road roller @ 18 litt./day = 18x0.61 = 10.98 lit. 1235 Total = 50.98 lit. litre 50.98 41.29 9999 Carriage of diesel L.S. 70.07 1.49 Total: Add water charges @ 1% on 113174.57 Add C.P & OH @15% on 114306.32 Cost for 370.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 355.28 Rs 355.30

Item Code: 16.36.2 P/L bitumen Penetration Maca- dam with hard stone aggregate with bitumen of suitable penetration grade : For 75 mm compacted thickness With paving asphalt 80/100 @ 68 kg/10 Sqm.

DSR-12

Page 673 of 2298

Code

0292 2206 0295 0297 0294 0296 0297 2916 2202 2211 0114 0114 0114 0114 0138 0114 0114 0114 0128 0001 0003 9999

1235 9999

Description

Details of Cost for : 300.00 Sqm Unit Quantity

(A)MATERIAL: Taking output as 300 sqm. for single layer. Coarse agg. = 300/10x0.90 = 27 cum. Key agg = 300/10x0.18 = 5.4 cum. Bitumen = 300/10x68 = 2.04 t. Stone aggregate 50mm (one size) cum Carraige of Stone aggregate above 40 mm cum Stone aggregate 20mm (one size) cum Stone aggregate 10mm (one size) cum Key aggregate Stone aggregate 25mm (one size) cum Stone aggregate 12.5mm (one size) cum Stone aggregate 10mm (one size) cum Bitumen 80/100 tonne Carriage of aggregate cum Carriage of bitumen tonne (B) LABOUR: Beldar for spreading stone metal Day Beldar for hand packing Day Beldar dry rolling Day Beldar/Bajri spreader Day Sprayer Day Beldar for spreading key aggregate Day Beldar for spraying bitumen Day Beldar road roller Day Mate Day (C) MACHINERY : (i) Bitumen boiler oil fed capacity 1500 lit with Day spray unit (ii) Road roller (8 to 10 tonne) Day Misc. items as spray nozzle, joint paper, coconut oil, country L.S. soap etc. (D) FUEL: (i) Diesel for boiler @ 10 litres per hour = 40.00 lit (ii) Diesel for road roller @ 18 lit./day = 18x0.75 = 13.50 lit. Total = 53.50 lit. litre Carriage of diesel L.S.

Rate

8.10 8.10 14.58 4.32

900.00 95.22 1050.00 1050.00

2.05 2.57 0.81 2.04 24.33 2.04

1000.00 1050.00 1050.00 37500.00 87.60 87.60

25.00 8.00 4.00 2.00 1.00 2.00 10.00 1.00 2.65

247.00 247.00 247.00 247.00 260.00 247.00 247.00 247.00 260.00

0.50

800.00

0.75 429.00

1500.00 1.49

53.50 73.06

41.29 1.49 Total: 130590.38

Add water charges @ 1% on

Add C.P & OH @15% on 131896.28 Cost for 300.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 505.60 Rs 505.60

Item Code: 16.37.1 P/L bitumen mastic wearing course with industrial bitumen of grade 85/25 IS:702: 25 mm thick. Details of Cost for : 17.40 Sqm Code Description Unit Quantity Details of cost for surface area of 17.40 sqm for single layer of 25 mm finished thickness. MATERIALS: Taking wearing coat as 1 tonne and density as 2.3 gm/c.c Volume of bitumen mastic =

DSR-12

Rate

Page 674 of 2298

0313 2211

0295 0296

1159

0784

0297

0313 2211 2202 2267 2208 1235 9999 0139 0130 0138 0139 0128 0016 9999

1000/2300= 0.435 cum surface area = 0.435/0.025 = 17.4 sqm. (i) Bitumen of penetration 85/25 @ 10.2% by weight of mix

tonne

0.102

37000.00

Carriage of bitumen tonne (ii) Weight of coarse aggregate @ 40% (1000 - 150) x 40/100 = 340 kg. Stone aggregate : 340/43.38x0.0283 = 0.222 cum. Stone Aggregate 20 mm. cum Stone Aggregate 12.5mm cum (iii) Weight of fine aggregate @ 15% 850x15/100 = 127.5 kg., volume of fine aggregate: 127.5/43.103x0.0283 =0.083 cum

0.102

87.60

0.02 0.202

1050.00 1050.00

Fine aggregate. (iv) Weight of lime stone dust @ 45% (850-340-127.5) = 382.50 kg., Volume of lime stone dust 382.50/2200 =0.174 cum. Lime aggregate. (v) Precoated stone chipping for surface finish: Volume of chips @ 0.005 cum/10 sqm=17.4x0.005/10 = 0.0087 cum say 0.009 cum Chips aggregate. Bitumen for precoated stone chipping @ 2% =0.009x1600x2/100= 0.288 say 0.30 kg. Bitumen 85/25 Carriage of bitumen Carriage of Stone aggregate (0.222 + 0.009) =0.231 cum. Carriage of fine aggregate. Carriage of Lime dust. Diesel for mastic cooker (Taking capacity of cooker as one tonne) Carriage of diesel LABOUR: Skilled Beldar. Mistry Sprayer Skilled Beldar for surface finish. Mate Hire/ running charges of mastic cooker sundries (Sealing of joints, placing angles, wastage materials)

cum

0.083

925.00

cum

0.174

1000.00

cum

0.009

1050.00

tonne tonne cum cum cum litre

0.0003 0.0003 0.231 0.083 0.174 100.00

37000.00 87.60 87.60 87.60 87.60 41.29

L.S.

136.50

1.49

Day Day Day Day Day Day L.S.

1.50 0.50 3.50 0.25 0.50 0.50 153.27

260.00 301.00 260.00 260.00 260.00 740.00 1.49

Add water charges @ 1% on

Total: 10906.41

Add C.P & OH @15% on 11015.47 Cost for 17.40 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 728.03 Rs 728.05

Item Code: 16.37.2 P/L bitumen mastic wearing course with industrial bitumen of grade 85/25 IS:702: 25 mm thick. Details of Cost for : 10.875 Sqm Code Description Unit Quantity Details of cost for surface area of 10.875sqm for single layer of 40 mm finished thickness. MATERIALS: Taking wearing coat as 1 tonne and density as 2.3 gm/c.c Volume of bitumen mastic =

DSR-12

Rate

Page 675 of 2298

0313 2211

0295 0296

1159

0784

0297

0313 2211 2202 2267 2208 1235 9999 0139 0130 0138 0139 0128 0016 9999

1000/2300= 0.435 cum Surface Area=0,435/0.040 = 10.875 sqm. (i) Bitumen of penetration 85/25 @ 10.2% by weight of mix

tonne

0.102

37000.00

Carriage of bitumen tonne (ii) Weight of coarse aggregate @ 40% (1000 - 150) x 40/100 = 340 kg. Stone aggregate : 340/43.38x0.0283 = 0.222 cum. Stone Aggregate 20 mm. cum Stone Aggregate 12.5mm cum (iii) Weight of fine aggregate @ 15% 850x15/100 = 127.5 kg., volume of fine aggregate: 127.5/43.103x0.0283 =0.083 cum

0.102

87.60

0.02 0.202

1050.00 1050.00

Fine aggregate. (iv) Weight of lime stone dust @ 45% (850-340-127.5) = 382.50 kg., Volume of lime stone dust 382.50/2200 =0.174 cum. Lime aggregate. (v) Precoated stone chipping for surface finish: Volume of chips @ 0.005 cum/10 sqm=17.4x0.005/10 = 0.0087 cum say 0.009 cum Chips aggregate. Bitumen for precoated stone chipping @ 2% =0.009x1600x2/100= 0.288 say 0.30 kg. Bitumen 85/25 Carriage of bitumen Carriage of Stone aggregate (0.222 + 0.009) =0.231 cum. Carriage of fine aggregate. Carriage of Lime dust. Diesel for mastic cooker (Taking capacity of cooker as one tonne) Carriage of diesel LABOUR: Skilled Beldar. Mistry Sprayer Skilled Beldar for surface finish. Mate Hire/ running charges of mastic cooker sundries (Sealing of joints, placing angles, wastage materials)

cum

0.083

925.00

cum

0.174

1000.00

cum

0.009

1050.00

tonne tonne cum cum cum

0.0003 0.0003 0.231 0.083 0.174

37000.00 87.60 87.60 87.60 87.60

litre L.S.

100.00 136.50

41.29 1.49

Day Day Day Day Day Day L.S.

1.50 0.50 3.50 0.25 0.50 0.50 153.27

260.00 301.00 260.00 260.00 260.00 740.00 1.49

Add water charges @ 1% on

Total: 10906.41

Add C.P & OH @15% on 11015.47 Cost for 10.875 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 1164.85 Rs 1164.85

Item Code: 16.38.1 2.5 Cm thick bitumastic sheet with hot bitumen : With paving Asphalt 80/100 @ 70 grams per kg of asphalt. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate 80/100 bitumen @56kg. per cum. of aggregate and 128kg. per cum. of sand: 56xl.65=92.4kg. = 0.092t + 128x1.65 = 211.2kg =0.211t 2916 = Total= 0.303t tonne 0.303 37500.00

DSR-12

Page 676 of 2298

2914 2211 2342 2910 2911 2202 0370 2200 0982 2203

0128 0114 0115 0114

0130 0114 0113 0101 0003 0001 0023 1235 9999 0364 0365 9999 9999

Solvent 0.070 kg. x 303 kg. = 21.21kg Carraige of Tar bitumen Carriage of solvent Stone chippings 13.2mm nominal size Stone chippings 11.2mm nominal size Carriage of stone chippings Coal (steam) Carraige of Steam coal Coarse sand Carraige of Coarse sand Labour for cleaning road surface, heating bitumen mixing and spreading aggregate : (a) For cleaning: Mate Beldar Coolie (b) For heating bitumen : Beldar (c) For cleaning, mixing and spreading pre-mix aggregate :

kilog tonne quint cum cum cum quint tonne cum cum

21.21 0.303 0.212 0.99 0.66 1.65 0.606 0.0606 1.65 1.65

23.00 87.60 8.76 1050.00 1050.00 87.60 400.00 100.11 1120.00 87.60

Day Day Day

0.16 1.40 1.40

260.00 247.00 247.00

Day

1.19

247.00

Mistry Beldar (d) Consolidation charges : Chowkidar (at barriers for night watch and for road roller)

Day Day

0.24 6.12

301.00 247.00

Day

0.34

247.00

Bhisti Hire charges of Diesel Road Roller - 8 to 10 tonne Hire charges of Coaltar Boiler 900 to 1400 litres Hire charges of Bitumen Concrete Mixer Diesel for road roller Carriage of diesel (e) Misc: Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

Day Day Day Day litre L.S.

0.13 0.13 0.21 0.05 2.34 5.33

260.00 1500.00 800.00 4000.00 41.29 1.49

each each L.S. L.S.

0.13 0.40 7.15 8.97

20.00 18.00 1.49 1.49 Total: 19426.95

Add water charges @ 1% on

Add C.P & OH @15% on 19621.22 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 225.64 Rs 225.65

Item Code: 16.38.2 2.5 Cm thick bitumastic sheet with hot bitumen : With paving Asphalt 60/70. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate 60/70 bitumen @56kg. per cum. of aggregate and 128kg. per cum. of sand: 56x1.65=92.4kg. = 0.092t + 128x1.65 = 211.2kg = 0.211 t 7309 Total= 0.303t tonne 0.303 38500.00 2211 Carriage of bitumen tonne 0.303 87.60 2910 Stone chippings 13.2mm nominal size cum 0.99 1050.00 2911 Stone chippings 11.2mm nominal size cum 0.66 1050.00 2202 Carriage of stone chippings cum 1.65 87.60

DSR-12

Page 677 of 2298

0370 2200 0982 2203

0128 0114 0115 0114

0130 0114 0113 0101 0003 0001 0023 1235 9999 0364 0365 9999 9999

Steam coal for heating bitumen @ 2 quintals per tonne of bitumen = 2x0.303=0.606q Carriage of steam coal Coarse sand Carriage of sand Labour for cleaning road surface, heating bitumen mixing and spreading aggregate : (a) For cleaning: Mate Beldar Coolie (b) For heating bitumen : Beldar (c) For cleaning, mixing and spreading pre-mix aggregate :

quint

0.606

400.00

tonne cum cum

0.0606 1.65 1.65

100.11 1120.00 87.60

Day Day Day

0.16 1.40 1.40

260.00 247.00 247.00

Day

1.19

247.00

Mistry Beldar (d) Consolidation charges: Chowkidar (at barriers for night watch and for road roller)

Day Day

0.24 6.12

301.00 247.00

Day

0.34

247.00

Bhishti Hire charges for road roller Hire charges for boiler Hire charges of Bitumen Concrete Mixer Diesel for road roller Carriage of diesel (e) Misc : Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

Day Day Day Day litre L.S.

0.13 0.13 0.21 0.05 2.34 5.33

260.00 1500.00 800.00 4000.00 41.29 1.49

each each L.S. L.S.

0.13 0.40 7.15 8.97

20.00 18.00 1.49 1.49 Total: 19240.26

Add water charges @ 1% on

Add C.P & OH @15% on 19432.66 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 223.48 Rs 223.50

Item Code: 16.38.3 2.5 Cm thick bitumastic sheet with hot bitumen : With Refinary Modified bitumen CRMB 55 Conforming to IRC : SP 53-1999.

Code

7739 2914 2211 2342 2910 2911 2202 0370 2200

DSR-12

Details of Cost for : 100.00 Sqm Description Unit Quantity Modified Bitumen CRMB - 55 (Refinery produced) @56kg. per cum. of aggregate and 128kg. per cum. of sand: 56xl.65=92.4kg. = 0.092t + 128x1.65 = 211.2kg = 0.211 t = 0.303 t Solvent 0.070 kg. x 303 kg. = 21.21kg. Carriage of bitumen Carriage of solvent Stone chippings 13.2mm nominal size Stone chippings 11.2mm nominal size Carriage of stone chippings Steam coal Carriage of steam coal

Tonne kilog tonne quint cum cum cum quint tonne

0.303 21.21 0.303 0.212 0.99 0.66 1.65 0.606 0.0661

Rate

38500.00 23.00 87.60 8.76 1050.00 1050.00 87.60 400.00 100.11

Page 678 of 2298

0982 2203

0128 0114 0115 0114

0130 0114 0113 0101 0003 0001 0023 1235 9999 0364 0365 9999 9999

Coarse sand Carriage of sand Labour for cleaning road surface, heating bitumen mixing and spreading aggregate : (a) For cleaning: Mate Beldar Coolie (b) For heating bitumen : Beldar (c) For cleaning, mixing and spreading pre-mix aggregate :

cum cum

1.65 1.65

1120.00 87.60

Day Day Day

0.16 1.40 1.40

260.00 247.00 247.00

Day

1.19

247.00

Mistry Beldar (d) Consolidation charges: Chowkidar (at barriers for night watch and for road roller)

Day Day

0.24 6.12

301.00 247.00

Day

0.34

247.00

Bhishti Hire charges for road roller Hire charges for boiler Hire charges of Bitumen Concrete Mixer Diesel for road roller Carriage of diesel (e) Misc : Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

Day Day Day Day litre L.S.

0.13 0.13 0.21 0.05 2.34 5.33

260.00 1500.00 800.00 4000.00 41.29 1.49

each each L.S. L.S.

0.13 0.40 7.15 8.97

20.00 18.00 1.49 1.49 Total: 19730.50

Add water charges @ 1% on

Add C.P & OH @15% on 19927.81 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 229.17 Rs 229.15

Item Code: 16.39.1 4 Cm thick bitumastic sheet with hot bitumen : With paving Asphalt 80/100 @ 70 grams/Kg of asphalt. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate Paving asphalt 80/100 @56kg. per cum. of aggregate and 128kg. per cum. of sand: 56x2.60=145.6kg. = 0.146t + 128x2.60 = 332.8kg = 0.333t 2916 = 0.479 t tonne 0.479 37500.00 2914 Solvent 0.70kg.x479=33.53kg. kilog 33.53 23.00 2342 Carriage of solvent quint 0.335 8.76 2211 Carriage of bitumen tonne 0.479 87.60 2910 Stone chippings 13.2mm nominal size cum 1.56 1050.00 2911 Stone chippings 11.2mm nominal size cum 1.04 1050.00 2202 Carriage of aggregate cum 2.60 87.60 0982 Coarse sand cum 2.60 1120.00 2203 Carriage of sand cum 2.60 87.60 0370 Steam coal for heating bitumen @ 2 qunitals per tonne of quint 0.958 400.00 bitumen = 2x0.479=0.958q 2200 Carriage of steam coal tonne 0.0958 100.11 Labour for cleaning road surface, heating bitumen mixing and spreading aggregate :

DSR-12

Page 679 of 2298

0128 0114 0115 0114

0130 0114 0113 0101 0003 1235 0001 0023 9999 0364 0365 9999 9999

(a) For cleaning: Mate Beldar Coolie (b) For heating bitumen : Beldar (c) For cleaning, mixing and spreading pre-mix aggregate : Mistry Beldar (d) Consolidation charges : Chowkidar Bhishti Hire charges for road roller Diesel for road roller @ 18 litres per day Hire charges for boiler Hire charges of Bitumen Concrete Mixer Carriage of diesel (e) Misc : Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

Day Day Day

0.16 1.40 1.40

260.00 247.00 247.00

Day

1.88

247.00

Day Day

0.31 9.46

301.00 247.00

Day Day Day litre Day Day L.S.

0.45 0.18 0.18 3.24 0.30 0.03 4.42

247.00 260.00 1500.00 41.29 800.00 4000.00 1.49

each each L.S. L.S.

0.09 0.27 5.33 16.12

20.00 18.00 1.49 1.49 Total: 29863.32

Add water charges @ 1% on

Add C.P & OH @15% on 30161.95 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 346.86 Rs 346.85

Item Code: 16.39.2 4 Cm thick bitumastic sheet with hot bitumen : With paving Asphalt 60/70 with no solvent. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate Paving asphalt 60/70 @56kg. per cum. of aggregate and 128kg. per cum. of sand: 56x2.60=145.6kg. = 0.146t + 128x2.60 = 332.8kg = 0.333t 7309 = 0.479 t tonne 0.479 38500.00 2211 Carriage of bitumen tonne 0.479 87.60 2910 Stone chippings 13.2mm nominal size cum 1.56 1050.00 2911 Stone chippings 11.2mm nominal size cum 1.04 1050.00 2202 Carriage of aggregate cum 2.60 87.60 0982 Coarse sand cum 2.60 1120.00 2203 Carriage of sand cum 2.60 87.60 0370 Steam coal for heating bitumen @ 2 qunitals per tonne of quint 0.958 400.00 bitumen =2x0.479=0.958 qtl. 2200 Carriage of steam coal tonne 0.0958 100.11 Labour for cleaning road surface, heating bitumen mixing and spreading aggregate : (a) For cleaning: 0128 Mate Day 0.16 260.00 0114 Beldar Day 1.40 247.00 0115 Coolie Day 1.40 247.00 (b) For heating bitumen : 0114 Beldar Day 1.88 247.00

DSR-12

Page 680 of 2298

(c) For cleaning, mixing and spreading pre-mix aggregate : 0130 0114 0113 0101 0003 1235 0001 0023 9999 0364 0365 9999 9999

Mistry Beldar (d) Consolidation charges : Chowkidar Bhishti Hire charges for road roller Diesel for road roller @ 18 litres per day Hire charges for boiler Hire charges of Bitumen Concrete Mixer Carriage of diesel (e) Brushes etc. for cleaning :Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

Day Day

0.31 9.46

301.00 247.00

Day Day Day litre Day Day L.S.

0.45 0.18 0.18 3.24 0.30 0.03 4.42

247.00 260.00 1500.00 41.29 800.00 4000.00 1.49

each each L.S. L.S.

0.09 0.27 5.33 16.12

20.00 18.00 1.49 1.49 Total: 29568.20

Add water charges @ 1% on

Add C.P & OH @15% on 29863.88 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 343.43 Rs 345.45

Item Code: 16.39.3 4 Cm thick bitumastic sheet with hot bitumen : With Refinary Modified bitumen CRMB 55 Conforming to IRC : SP 53-1999.

Code

7739 2914 2342 2211 2910 2911 2202 0982 2203 0370 2200

0128 0114 0115 0114

0130

DSR-12

Details of Cost for : 100.00 Sqm Description Unit Quantity Modified Bitumen CRMB - 55 (Refinary produced) @56kg. per cum. of aggregate and 128kg. per cum. of sand: 56x2.60=145.6kg. = 0.146t + 128x2.60 = 332.8kg = 0.333t = 0.479 tonne Solvent 0.70kg.x479=33.53kg. Carriage of solvent Carriage of bitumen Stone chippings 13.2mm nominal size Stone chippings 11.2mm nominal size Carriage of aggregate Coarse sand Carriage of sand Steam coal for heating bitumen @ 2 qunitals per tonne of bitumen = 2x0.479=0.95 8q Carriage of steam coal Labour for cleaning road surface, heating bitumen mixing and spreading aggregate : (a) For cleaning: Mate Beldar Coolie (b) For heating bitumen : Beldar (c) For cleaning, mixing and spreading pre-mix aggregate : Mistry

Rate

Tonne kilog quint tonne cum cum cum cum cum quint

0.479 33.53 0.335 0.479 1.56 1.04 2.60 2.60 2.60 0.958

38500.00 23.00 8.76 87.60 1050.00 1050.00 87.60 1120.00 87.60 400.00

tonne

0.0958

100.11

Day Day Day

0.16 1.40 1.40

260.00 247.00 247.00

Day

1.88

247.00

Day

0.31

301.00

Page 681 of 2298

0114 0113 0101 0003 1235 0001 0023 9999 0364 0365 9999 9999

Beldar (d) Consolidation charges : Chowkidar Bhishti Hire charges for road roller Diesel for road roller @ 18 litres per day Hire charges for boiler Hire charges of Bitumen Concrete Mixer Carriage of diesel (e) Misc: Wire brush (with thick wire) Soft brush Brooms and gunny bags Sundries

Day

9.46

247.00

Day Day Day litre Day Day L.S.

0.45 0.18 0.18 3.24 0.30 0.03 4.42

247.00 260.00 1500.00 41.29 800.00 4000.00 1.49

each each L.S. L.S.

0.09 0.27 5.33 16.12

20.00 18.00 1.49 1.49 Total: 30342.32

Add water charges @ 1% on

Add C.P & OH @15% on 30645.74 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 352.43 Rs 352.45

Item Code: 16.40 P/L seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 Kg of grade 80/100 bitumen. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate 2916 Bitumen @ 128kg/cum. of sand 128x0.60 = tonne 0.0768 37500.00 76.80kg. = 0.0768 m.t. 2211 Carriage of bitumen tonne 0.0768 87.60 0982 Fine aggregate (Coarse sand) cum 0.60 1120.00 2203 Carriage of coarse sand cum 0.60 87.60 0370 Steam coal for heating bitumen @ 2 qunitals quint 1.536 400.00 per tonne of bitumen =2x0.768=0.1.536 qtl. 2200 Carriage of steam coal Labour for cleaning road surface, tonne 0.1536 100.11 heating bitumen mixing and spread (a) For cleaning: 0128 Mate Day 0.06 260.00 0114 Beldar Day 0.49 247.00 0115 Coolie Day 0.97 247.00 (b) For heating bitumen : 0114 Beldar-0.38/96x76.8 Day 0.30 247.00 (c) For cleaning, mixing and spreading pre-mix aggregate : 0114 0130 0113 0101 0003 0001 0023 1235 9999 0364 0365

DSR-12

Beldar-11.39/0.75x0.60 Mistry-0.06/0.75x0.60 (d) Miscellaneous : Chowkidar (at barrier for night watch and for road roller)

Day Day

1.11 0.05

247.00 301.00

Day

0.15

247.00

Bhishti Hire charges for road roller Hire charges for boiler Hire charges of Bitumen Concrete Mixer Diesel for road roller Carriage of diesel (e) Misc : Wire brush (with thick wire) Soft brush

Day Day Day Day litre L.S.

0.06 0.06 0.05 0.01 1.08 0.26

260.00 1500.00 800.00 4000.00 41.29 1.49

each each

0.05 0.12

20.00 18.00

Page 682 of 2298

9999

Sundries

L.S.

18.20

Add water charges @ 1% on

1.49 Total: 5278.52

Add C.P & OH @15% on 5331.31 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 61.31 Rs 61.30

Item Code: 16.41 P/L seal coat over prepared surface of road with bitumen heated in bitumen 80/100. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate 2916 Bitumen 80/100 tonne 0.098 37500.00 2211 Carriage of bitumen tonne 0.098 87.60 0298 Stone aggregate cum 0.90 1100.00 2202 Carriage of stone aggregate cum 0.90 87.60 0370 Steam coal for heating bitumen @ 2 qunitals per tonne of quint 1.96 400.00 bitumen =2x0.0.98=1.96 qtl. 2200 Carriage of steam coal tonne 0.196 100.11 Labour for cleaning road surface, heating bitumen mixing and spreading aggregate : (a) For heating and spraying bitumen : 0130 Mistry Day 0.04 301.00 0138 Sprayman Day 0.06 260.00 0114 Beldar Day 0.69 247.00 (b) For cleaning: 0128 Mate Day 0.11 260.00 0114 Beldar Day 1.40 247.00 0115 Coolie Day 1.40 247.00 (c) For screening and spraying aggregate : 0128 Mate Day 0.05 260.00 0114 Beldar Day 0.51 247.00 (d) Misc : 0113 Chowkidar (at barrier for night watch and for road roller) Day 0.15 247.00 0101 0003 0007 1235 0001 0364 0365 9999 9999

Bhishti Hire charges for road roller Hire charges for tar sprayer unit Diesel for road roller @ 18 litres per day Hire charges of boiler (e) Misc : Wire brush (with thick wire) Soft brush Sundries Brooms and gunny bags

Day Day Day litre Day

0.06 0.06 0.06 1.08 0.06

260.00 1500.00 300.00 41.29 800.00

each each L.S. L.S.

0.05 0.12 18.20 2.73

20.00 18.00 1.49 1.49 Total: 6900.87

Add water charges @ 1% on

Add C.P & OH @15% on 6969.88 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 80.15 Rs 80.15

Item Code: 16.42 C.C 1:2:4 in pavements laid to required slop and camber in panels etc.

DSR-12

Page 683 of 2298

Code

Details of Cost for : 1.00 Cum Unit Quantity

Description

Rate

MATERIALS: Cement concrete 1:2:4 mix 0295 0293 0297 2206

Stone aggregate 20mm Stone aggregate 40mm (One size) Stone aggregate 10mm Carraige of Stone aggregate 40 mm nominal size and above

cum cum cum cum

2202 0982 2203 0367 2209

Carriage of 20mm aggregate Coarse sand Carriage of coarse sand Cement Carriage of cement LABOUR: Mason (avge) Beldar Bhisthi Hire running charges of concrete mixer Vibrator (Hire charges) Sundries Side shuttering : Taking the slab to be 15cm thick and width to be 6 metre, length of road 27 metre = 9.90/24.30

0155 0114 0101 0002 0012 9999

05.009.01 9999

0.22 0.52 0.11 0.52

1050.00 950.00 1050.00 95.22

cum cum cum tonne tonne

0.33 0.445 0.445 0.32 0.32

87.60 1120.00 87.60 5000.00 77.87

Day Day Day Day Day L.S.

0.10 1.63 0.70 0.077 0.07 26.00

287.00 247.00 260.00 800.00 300.00 1.49

Centering & shuttering including strutting, propping etc. - Sqm Foundations, footings, bases o Sundries L.S.

0.407

166.88

1.43

1.49 Total: 3818.00

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 3856.18 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4502.53 Rs 4502.55

Item Code: 16.43.1 P/L design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using coarse sand and graded stone aggregate of 40 mm nominal size - Cement concrete prepared with batch mixing machine

Code 0367 2209 0293 0295 0297 0982 2206 2202 2203

0114

DSR-12

Description MATERIALS: Portland Cement Carraige of Cement Stone Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Coarse sand (zone III) Carraige of Stone aggregate 40 mm nominal size and above Carraige of Stone aggregate below 40 mm nominal size Carraige of Coarse sand LABOUR: For mixing and laying : Beldar

Details of Cost for : 1.00 Cum Unit Quantity

Rate

tonne tonne cum cum cum cum cum

0.34 0.34 0.52 0.22 0.11 0.445 0.52

5000.00 77.87 950.00 1050.00 1050.00 1120.00 95.22

cum cum

0.33 0.445

87.60 87.60

Day

2.00

247.00

Page 684 of 2298

0101 0123 0124 0128 0155 0114 0004 0009

0021 0022 1235 1235 1235 1643-B 9999

Bhisti Mason (brick layer) 1st class Mason (brick layer) 2nd class Mate For compaction by vibrator Mason (average) Beldar MACHINERY : Production cost of concrete by batch mix plant. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. Assuming 25 cum / day Pin vibrator Surface Vibrator (with 25 cum putput per day) Fuel Charges: Diesel oil (for mixer) Diesel oil (for pin vibrator - 10 lt/day assumed) Diesel oil For surface vibrator ( 5 lit/day assumed) Add for steel form work : ANNEXURE-B for item No. 16.43 STEEL FORM WORK: Cutting and making joints

Day Day Day Day

0.27 0.05 0.05 0.04

260.00 301.00 273.00 260.00

Day Day

0.07 0.07

287.00 247.00

cum cum

1.00 1.00

350.00 130.00

Day Day

0.025 0.05

325.00 400.00

litre litre litre

1.20 0.25 0.25

41.29 41.29 41.29

Cum L.S.

1.00 50.00

361.86 1.49 Total: 4838.14

Add water charges @ 1% on

Add C.P & OH @15% on 4886.52 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5619.50 Rs 5619.50

Item Code: 16.43.2 P/L design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using coarse sand and graded stone aggregate of 40 mm nominal size - Cement concrete manufactured in automatic batching_x000D_ plant (RMC plant) i/c transportation to site in transit

Code 0367 2209 0293 0295 0297 0982 2206 2202 2203

0114 0101 0123 0124 0128 0155 0114

DSR-12

Description MATERIALS: Portland Cement Carraige of Cement Stone Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Coarse sand (zone III) Carraige of Stone aggregate 40 mm nominal size and above Carraige of Stone aggregate below 40 mm nominal size Carraige of Coarse sand LABOUR: For mixing and laying : Beldar Bhisti Mason (brick layer) 1st class Mason (brick layer) 2nd class Mate For compaction by vibrator Mason (average) Beldar

Details of Cost for : 1.00 Cum Unit Quantity

Rate

tonne tonne cum cum cum cum cum

0.34 0.34 0.52 0.22 0.11 0.445 0.52

5000.00 77.87 950.00 1050.00 1050.00 1120.00 95.22

cum cum

0.33 0.445

87.60 87.60

Day Day Day Day Day

2.00 0.27 0.05 0.05 0.04

247.00 260.00 301.00 273.00 260.00

Day Day

0.07 0.07

287.00 247.00

Page 685 of 2298

0004 0029 0009

0021 0022 1235 1235 1235 1643-B 9999

MACHINERY : Production cost of concrete by batch mix plant. Carriage of concrete by transit mixer. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. Assuming 25 cum / day Pin vibrator Surface Vibrator WITH 25 cum output per day Fuel Charges: Diesel oil (for mixer) Diesel oil (for pin vibrator - 10 lt/day assumed) Diesel oil For surface vibrator ( 5 lit/day assumed) Add for steel form work : ANNEXURE-B for item No. 16.43 STEEL FORM WORK: Cutting and making joints

cum km/ c cum

1.00 10.00 1.00

350.00 30.00 130.00

Day Day

0.025 0.05

325.00 400.00

litre litre litre

1.20 0.25 0.25

41.29 41.29 41.29

Cum L.S.

1.00 50.00

361.86 1.49 Total: 5138.14

Add water charges @ 1% on

Add C.P & OH @15% on 5189.52 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5967.95 Rs 5967.95

Item Code: 16.44 Extra for providing and mixing hard crete of approved quality Code 7254

Details of Cost for : 1.00 Ltr Unit Quantity

Description MATERIALS: Hardcrete (including cartage)

litre

Rate

1.00

37.00 Total: 37.00

Add water charges @ 1% on

Add C.P & OH @15% on 37.37 Cost for 1.00 Ltr Rate per One Litre: Rate as per DSR-12:

Rs 42.98 Rs 43.00

Item Code: 16.45 P/L pre moukded joints filler in expansion joints. Code

0317

2211 0124 0114 9999

Description Details of cost for 18mm thick 15cm deep and 300m in length = 300x0.15 = 45 sqm. 18mm thick joint filler Carriage of filler 45x0.018 =0.81 cum. Weight 256.3kg. per cum. = 256.3x0.81 = 207.6kg. = 0.21 tonne Labour for fixing etc. : Mason 2nd class Beldar Sundries

Details of Cost for : 8100.00 units Unit Quantity

sqm

tonne Day Day L.S.

45.00

350.00

0.21

87.60

1.00 3.00 26.91

273.00 247.00 1.49 Total: 16822.50

Add water charges @ 1% on

DSR-12

Rate

Page 686 of 2298

Add C.P & OH @15% on 16990.73 Cost for 8100.00 units Rate per Units: Rate as per DSR-12:

Rs 2.41 Rs 2.40

Item Code: 16.46.1 P/L in position bitumen hot sealing compound for expansion joints etc. : P/L bitumen hot sealing comp- ound in expansion joints.

Code

0314 2211 0124 0114 9999

Description Details of cost for 20mm wide 20mm deep and 300 metres in length. Sealing compound300x0.02x0.02 = 0.12cum. Weight 256.3kg. per cum. = 256.3x0.12 = 30.76 kg. Carriage of compound 30.76 = 0.3076 Say 0.03 tonne Labour for filling: Mason 2nd class Beldar Sundries

Details of Cost for : 1200.00 units Unit Quantity

Rate

kilog tonne

30.76 0.03

26.00 87.60

Day Day L.S.

1.00 2.50 20.67

273.00 247.00 1.49 Total: 1723.69

Add water charges @ 1% on

Add C.P & OH @15% on 1740.93 Cost for 1200.00 units Rate per Units: Rate as per DSR-12:

Rs 1.67 Rs 1.65

Item Code: 16.47.1 Painting runway/taxi track/ apron marking with adequate No of coats togive uniform finish paint of superior make like Goodlas Nerolac Brand 452/002: New work (Two or more coats). Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIAL: 1st Coat = 1.66 + 2nd Coat = 1.13 = 2.79 7256 Road marking paint litre 2.79 170.00 9999 Carriage of paint L.S. 5.07 1.49 LABOUR: 0131 Painter Day 0.54 273.00 0114 Beldar Day 0.54 247.00 9999 Sundries (including painting brush, wire brush, labour for L.S. 36.40 1.49 controlling traffic and other Total: Add water charges @ 1% on 816.89 Add C.P & OH @15% on 825.06 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 94.88 Rs 94.90

Item Code: 16.47.2

DSR-12

Page 687 of 2298

Painting runway/taxi track/ apron marking with adequate No of coats togive uniform finish paint of superior make like Goodlas Nerolac Brand 452/002: Old work (one or more coats). Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIAL: 7256 Road marking paint litre 1.66 170.00 9999 Carriage of paint L.S. 1.12 1.49 LABOUR: 0131 Painter Day 0.36 273.00 0114 Beldar Day 0.36 247.00 9999 Sundries (including painting brush, wire L.S. 24.44 1.49 brush, labour for controlling traffic and other T&P etc.) Total: Add water charges @ 1% on 507.49 Add C.P & OH @15% on 512.56 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 58.94 Rs 58.95

Item Code: 16.48.1 Painting road surface marking with adequate No. of coats to give uniform finish paint conforming to IS : 164,:- New work (Two or more coats). Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIAL: 7255 Road marking paint (confirming to IS 164 spirit base) litre 1.48 120.00 9999 Carriage of paint (1.48/0.80 0.08 6.9) L.S. 2.65 1.49 LABOUR: 0128 Mate/Supervisor Day 0.10 260.00 0131 Painter Day 0.54 273.00 0114 Beldar for stretching of rope & errecting of barricading Day 1.68 247.00 9999 Sundries (including painting brush, wire L.S. 36.40 1.49 brush, labour for controlling traffic and other T&P etc.) Total: Add water charges @ 1% on 824.17 Add C.P & OH @15% on 832.41 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 95.73 Rs 95.75

Item Code: 16.48.2 Painting road surface marking with adequate No. of coats to give uniform finish paint conforming to IS : 164,:- Old work (One or more coats). Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIAL: 7255 Road marking paint (confirming to IS 164 spirit base) litre 0.89 120.00 9999 Carriage of Paint L.S. 0.65 1.49 LABOUR: 0128 Mate/Supervisor Day 0.06 260.00 0131 Painter 2nd class Day 0.36 273.00 0114 Beldar (stretching of rope & errecting of barricading etc.) Day 1.12 247.00 9999

DSR-12

Sundries (including painting brush, wire

L.S.

24.44

1.49

Page 688 of 2298

brush, labour for controlling traffic and other T&P etc.) Add water charges @ 1% on

Total: 534.71

Add C.P & OH @15% on 540.06 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 62.11 Rs 62.10

Item Code: 16.49 Making bell mouth opening/ entrance of size 100x50x50 Cm for drainage pipe under foot path i/c providing CC 1:3:6 for shape of bell mouth. Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate (i) Earth work in excavation Channel:- 10x1x1.00x0.20x0.15=0.30+ Bell mouth 10x1x1.00x0.50x(0.18+0.075)/2= 0.64 02.008.01 E/W excavation in foundation trenches .. .. All kinds of soil. 0.94 130.78

04.001.08

04.001.05

05.003

05.022.01

DSR-12

(ii) Cement concrete 1:4:8 Channel :-10x1x1.00x0.20x0.075 = 0.15 cum. P/L CC excluding centering - All work up to plinth level: 1:4:8 Coarse sand, 40mmstone a (iii) Cement concrete 1:3:6 Channel 10x1x1.00x0.20x0.075 = 0.15 + Bed of bell mouth : 10x1x1.00x0.50x(0.18+0.075)/2 = 0.64 + Haunches portion 10x2x(0.35+0.075)/2x0.25x0.375 = 0.40 + Rect part :10x2x0.35x0.25x0.375 = 0.65 + Quadrant portion :10x 1 [(0.30x0.30)-3.142/4(0.30)^x0.30 =0.06+ Central middle part :10x1x0.30x0.25x0.075 = 0.05 Total = 1.95 cum. P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 20mmstone a (iv) RCC in shelves 1:2:4 10x1x1.00x0.50x0.05 =0.25cum. RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt (v) Reinforcement for RCC @100kg/cum. 0.25x100=25kg. Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi (vi) Centering and shuttering For shelves (sides) (X)10x2(1.00+0.50)x0.05= 1.50+ Front side of bell mouth : (X)10x2(0.446)x0.375 = 3.34 + Pipe portion: 10x*0.30x0.375-3.142/4(0.30)² + = 0.04 + Out side of bell mouth = 10x(1.00/ 0.50)x0.45 = 9.00+ Deduct pipe opening

0.15

3593.30

1.95

4024.00

0.25

5494.55

25.00

56.77

Page 689 of 2298

05.009.01

13.016.01

13.018 0367 2209 0983 2261 0114 0101 9999 9999 0155 0115 0101 9999 9999

=10x0.785x0.30x0.30 = (-)0.71 = 13.17 Centering & shuttering including strutting, propping etc. Foundations, footings, bases o (vii) cement plaster on RCC slab 10x1.00x0.50 = 5.00+ 10x2(1.00+0.50)x0.05 = 1.50+ = 6.50 sqm. 6 mm CP of mix : 1:3 (1 cement: 3 fine sand) (viii) Neat cement punning: Qty. same as marked (x) at (vi) above =3.34+0.04 = 3.38 sqm. Channel portion: 10x1x(0.85+0.30)/2x0.25 = 1.43 Total = 4.81 Neat cement punning Cement tonne Carriage of cement tonne Fine sand cum Carriage of fine sand cum Beldar Day Bhishti Day Hire charges of mixer L.S. Sundries L.S. LABOUR FOR PLASTER Mason Day Coolie Day Bhishti Day Extra for removing burr L.S. Scaffolding L.S.

13.17

166.88

6.50

101.02

4.81 0.024 0.024 0.05 0.05 0.035 0.003 1.27 1.27

31.12 5000.00 77.87 640.00 87.60 247.00 260.00 1.49 1.49

0.33 0.488 0.60 8.71 7.62

287.00 247.00 260.00 1.49 1.49 Total: 567.04

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on 572.71 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 1496.44 Rs 1495.55

Item Code: 16.50 P/F Glow studs of size 100 x 20mm made of heavy duty body shall be moulded ASA/HIP/ ABS having electronically welded microprismatic lens Cat's Eye in accordance with ASTM D-280. Details of Cost for : 15.00 Nos Code Description Unit Quantity Rate MATERIALS: 7426 Cats eye each 15.00 180.00 9999 Carriage of Cat's eye L.S. 2.60 1.49 LABOUR: 0124 Mason 2nd class Day 0.50 273.00 0114 Beldar Day 0.50 247.00 9999 Sundries (including material required for fixing cats eyes and L.S. 39.00 1.49 providing barricading to di Total: Add water charges @ 1% on 3021.98 Add C.P & OH @15% on 3052.20 Cost for 15.00 Nos Rate per Each:

DSR-12

Rs 234.00

Page 690 of 2298

Rate as per DSR-12:

Rs 234.00

Item Code: 16.51.1 Preparation of sub-base road pavement with commercial dry lime (slaked), fly ash : Minimum thickness 15 cm. Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate Details of cost for 6.67 sqm. or 1 cum. MATERIALS: 0777 slaked lime quint 0.41 220.00 2208 Carraige of Lime cum 0.068 87.60 1980 Flyash cum 0.277 7.75 2267 Carriage of Flyash cum 0.277 87.60 LABOUR: (i)For earth work: 0114 Beldar Day 0.116 247.00 0115 Coolie Day 0.116 247.00 0979 Royalty for good earth cum 0.655 30.00 2241 Carriage of good earth cum 0.655 109.50 (ii) For mixing: 0114 Beldar Day 0.025 247.00 0115 Coolie Day 0.025 247.00 (iii) For rolling layers : 0113 Chowkidar Day 0.0008 247.00 0003 Hire charges of roller Day 0.0008 1500.00 1235 Diesel for road roller litre 0.0144 41.29 2342 Carriage of diesel quint 0.0002 8.76 9999 Sundries L.S. 0.18 1.49 (iv) Labour for spreading and watering : 0114 Beldar Day 0.26 247.00 0115 Coolie Day 0.26 247.00 0101 Bhishti Day 0.18 260.00 Total: Add water charges @ 1% on 461.11 Add C.P & OH @15% on 465.72 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 535.58 Rs 535.60

Item Code: 16.52 P/F precast lime fly ash concrete blocks 1 : 2 : 3 : 6 i/c finishing with CM 1 : 3. Details of Cost for : 0.90 Cum Code Description Unit Quantity Details of cost for a path of area 10.00 sqm. no. of blocks required for 10.00 sqm. = 108 nos. (a) Concrete in blocks (108x0.30x0.30x0.09 = 0.875 cum.) 16.052.Y Sub-Analysis - Y for Item 16.52 0.875 (b) Labour for Surface excavation . 0114 Beldar Day 0.72 0115 Coolie Day 0.60 (c) For levelling course of fine sand 6501 Jamuna sand cum 0.10 2335 Carriage of Jamuna sand cum 0.10 Labour: 0114 Beldar Day 0.0089 0115 Coolie Day 0.0107

DSR-12

Rate

2242.16 247.00 247.00 500.00 87.60 247.00 247.00

Page 691 of 2298

0101 03.008 0155 0115 0101 9999

6501 2335 0123 0115 0101

Bhishti (d) For finishing with 10mm thick cement plaster Cement mortar 1:3 (1 cement : 3 coarse sand) Cement: 3 Coarse sand) Mason Coolie Bhishti Scaffolding and sundries (e) For laying blocks and filling joints with Jamuna sand for filling joints 5mm (av.) thick Fine sand (Jamuna) Carriage of fine sand Mason 2nd class Coolie Bhishti

Day

0.0035

260.00

Cum

0.0972

4145.53

Day Day Day L.S.

0.787 0.787 0.262 12.22

287.00 247.00 260.00 1.49

cum cum Day Day Day

0.005 0.005 0.90 1.98 0.05

500.00 87.60 301.00 247.00 260.00 Total: 4037.88

Add water charges @ 1% on

Add C.P & OH @15% on 4078.26 Cost for 0.90 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5211.11 Rs 5211.10

Item Code: 16.53 P/F concertina coil fencing with required dia. 610 mm (having 15 nos. round/ meter length) upto 3.0 m height of wall with existing angle iron 'Y' shaped with 9 horizontal R.B.T. stud tied with G.I. staples and G.I clips.

Code 8691 8692

8693 9999

0114 0102 0103

Details of Cost for : 30.00 m Unit Quantity

Description MATERIALS : Punched tape concertina coil 600 m dia. 10m openable length (Total length 90m) R.B.T. Reinforced Barbed Tape 9 rounds 9x30 = 270m Turn buckle and strengthening bolt. G.I. staples clips etc. LABOUR Labour for fixing straightening cutting of tape/ coils & wire Beldar 0.50x2 = 1.00 Nos (Taken double due to height) Blacksmith 1st class Blacksmith 2nd class

Rate

bundl

5.00

730.00

metre

270.00

8.50

each L.S.

10.00 49.40

40.00 1.49

Day Day Day

1.00 0.50 0.50

247.00 301.00 273.00 Total: 6952.61

Add water charges @ 1% on

Add C.P & OH @15% on 7022.14 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 269.18 Rs 269.20

Item Code: 16.54.1 P/L Dense Bituminous macadam on prepared surface with specified crushed stone agg. for profile corrective base/ binding course i/c loading, tansporting to site, laying with paver finisher and rolling with RR: 50/ 75 mm average compacted thickness .. Details of Cost for : 195.00 Cum

DSR-12

Page 692 of 2298

Code

7309 2211

0294 0297 0297 0298 2903 2202 0777

2208 0062 0063 0064 0069 0052 0053 0053

0055 0054

0056 0128 0114

0139

Description Details of cost for 195 CUM (or 450 tonnes) (A) MATERIALS Paving Asphalt of grade VG-30 of approved quality (percentage by weight of total mix) Carraige of Tar bitumen Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 22.50 tonnes Weight of aggregate = 450 - 22.50 = 427.50 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 427.50 / 1.5 = 285 cum Grading - II / 19mm (Nominal size) 25 - 10mm size - 30% of 285 = 85.50 cum 10 - 5mm size = 28% of 285 = 79.80 cum 5mm and below = 40% of 285 =114 cum

Unit

Stone Aggregate 25mm size (single size) Qty = 85.50 x 50 / 100 Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Qty = 79.8 x 50 /100 Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Dry hydrated lime (factory made) Lime filter @ 2% (percentage by weight of aggregate) Lime filter @ 2% (percentage by weight of aggregate) Carraige of Lime (B) MACHINERY Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% of cost of carriage to cover cost of loading and unloading ( Qty of 10% on 4500 i Smooth Wheeled Roller 8 to 10 tonne For initial break down rolling (6 x 0.65) Vibratory roller 8 to 10 tonne For intermediate rolling (6 x 0.65) Finish rolling with 6-8 tonnes smooth wheeled tandem roller (6 x 0.65) Tandem Road Roller (C) LABOUR Mate Beldar Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Skilled Beldar (for floor rubbing etc.) for checking line & level

Quantity

Rate

tonne tonne

22.50 22.50

38500.00 87.60

cum cum cum

42.75 42.75 39.90

1000.00 1050.00 1050.00

cum cum cum quint

39.90 114.00 279.30 85.50

1100.00 1150.00 87.60 220.00

6.63

87.60

hours Hours hours hours Hours tonne

3.00 3.00 6.00 6.00 6.00 4500.00

23700.00 17500.00 2700.00 900.00 800.00 3.00

tonne

450.00

3.00

Hours

3.90

460.00

Hours

3.90

1550.00

Hours

3.90

1150.00

Day Day

0.84 14.00

260.00 247.00

Day

5.00

260.00 Total: 1398751.37

cum

Add water charges @ 1% on

Add C.P & OH @15% on 1412738.88 Cost for 195.00 Cum

DSR-12

Page 693 of 2298

Rate per One Cum: Rate as per DSR-12:

Rs 8331.54 Rs 8331.55

Item Code: 16.54.2 P/L Dense Bituminous macadam, base/ binding course i/c loading, tansporting to site, laying with paver finisher and rolling with RR: 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @5% percentage by weight of total mix) and lime fill

Code

7309 2211

0294 0297 0297 0298 2903 2202 0777 2208 0076 0064 0069 0052 0053 0053

0055 0054

0056 0128 0114

DSR-12

Description (A) MATERIALS Details of cost for 195 CUM (or 450 tonnes) Paving Asphalt of grade VG-30 of approved quality (percentage by weight of total mix) Carraige of Tar bitumen Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 22.50 tonnes Weight of aggregate = 450 - 22.50 = 427.50 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 427.50 / 1.5 = 285 cum Grading - II / 19mm (Nominal size) 25 - 10mm size - 30% of 285 = 85.50 cum 10 - 5mm size = 28% of 285 = 79.80 cum 5mm and below = 40% of 285 =114 cum Stone Aggregate 25mm size (single size) Qty = 85.50 x 50 / 100 Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Qty = 79.8 x 50 /100 Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Dry hydrated lime (factory made) Lime filter @ 2% (percentage by weight of aggregate) Carraige of Lime (B) MACHINERY Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% of cost of carriage to cover cost of loading and unloading ( Qty of 10% on 4500 i Smooth Wheeled Roller 8 to 10 tonne For initial break down rolling (6 x 0.65) Vibratory roller 8 to 10 tonne For intermediate rolling (6 x 0.65) Finish rolling with 6-8 tonnes smooth wheeled tandem roller (6 x 0.65) Tandem Road Roller (C) LABOUR Mate Beldar

Details of Cost for : 195.00 Cum Unit Quantity

Rate

tonne tonne

22.50 22.50

38500.00 87.60

cum cum cum

42.75 42.75 39.90

1000.00 1050.00 1050.00

cum cum cum quint

39.90 114.00 279.30 85.50

1100.00 1150.00 87.60 220.00

cum

6.63

87.60

hour

6.00

14000.00

hours hours Hours tonne

6.00 6.00 6.00 4500.00

2700.00 900.00 800.00 3.00

tonne

450.00

3.00

Hours

3.90

460.00

Hours

3.90

1550.00

Hours

3.90

1150.00

0.84 14.00

260.00 247.00

Day Day

Page 694 of 2298

0139

Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Skilled Beldar (for floor rubbing etc.) for checking line & level Day

5.00

Add water charges @ 1% on

260.00 Total: 1359151.37

Add C.P & OH @15% on 1372742.88 Cost for 195.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 8095.66 Rs 8095.65

Item Code: 16.55.1 P/L Bituminous macadam on prepared surface with specified crushed stone agg. for profile corrective base/ binding course i/c loading, tansporting to site, laying with paver finisher and rolling with RR: 50/ 75 mm ave. compacted thickness with bitumen of

Code

7309 2211

0294 0297 0297 0298 2903 2202 0062 0063 0064 0069 0052 0053 0053

0055 0054

DSR-12

Description Details of cost for 205 cum (450 tonnes) MATERIALS: Paving Asphalt of grade VG-30 of approved quality Carraige of Tar bitumen Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 15.75 tonnes Weight of aggregate = 450 - 15.75 = 434.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 434.25 / 1.5 = 289.50 cum Grading - II / 19mm (Nominal size) 25 - 10mm size - 40% of 289.50 = 115.80 cum 10 - 5mm size = 40% of 289.50 = 115.80 cum 5mm and below = 20% of 289.50 = 57.90 cum Stone Aggregate (Single size) : 25 mm nominal size Qty = 115.80 x 50 /100 Stone Aggregate (Single size) : 10 mm nominal size Qty = 115.80 x 50 /100 Stone Aggregate (Single size) : 10 mm nominal size Qty = 115.80 x 50 /100 Stone Aggregate (Single size) : 06 mm nominal size Qty = 115.80 x 50 /100 Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size (B) MACHINERY Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carriage to cover cost of loading and unloading (Qty taken as 10% of 4 Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonnes smooth wheeled tandem roller (6 x 0.65)

Details of Cost for : 205.00 Cum Unit Quantity

Rate

tonne tonne

15.75 15.75

38500.00 87.60

cum

57.90

1000.00

cum

57.90

1050.00

cum

57.90

1050.00

cum cum cum

57.90 57.90 289.50

1100.00 1150.00 87.60

hours Hours hours hours Hours tonne

3.00 3.00 6.00 6.00 6.00 4500.00

23700.00 17500.00 2700.00 900.00 800.00 3.00

tonne Hours Hours

450.00 3.90 3.90

3.00 460.00 1550.00

Page 695 of 2298

0056 0128 0114

0139

Tandem Road Roller (C) LABOUR: Mate Beldar Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Skilled Beldar for checking line & levels

Hours

3.90

1150.00

Day Day

0.84 14.00

260.00 247.00

Day

5.00

260.00

Add water charges @ 1% on

Total: 1125030.30

Add C.P & OH @15% on 1136280.60 Cost for 205.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6374.26 Rs 6374.25

Item Code: 16.55.2 Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder .. .. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @3.50% (percentage by weight of total mix) prepared i

Code

7309 2211

0294 0297 0297 0298 2903 2202 0076 0064 0069 0052 0053 0053

DSR-12

Description Details of cost for 205 cum (450 tonnes) MATERIALS: Paving Asphalt of grade VG-30 of approved quality Carraige of Tar bitumen Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 15.75 tonnes Weight of aggregate = 450 - 15.75 = 434.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 434.25 / 1.5 = 289.50 cum Grading - II / 19mm (Nominal size) 25 - 10mm size - 40% of 289.50 = 115.80 cum 10 - 5mm size = 40% of 289.50 = 115.80 cum 5mm and below = 20% of 289.50 = 57.90 cum Stone Aggregate (Single size) : 25 mm nominal size Qty = 115.80 x 50 /100 Stone Aggregate (Single size) : 10 mm nominal size Qty = 115.80 x 50 /100 Stone Aggregate (Single size) : 10 mm nominal size Qty = 115.80 x 50 /100 Stone Aggregate (Single size) : 06 mm nominal size Qty = 115.80 x 50 /100 Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size (B) MACHINERY Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carriage to cover cost of loading and unloading (Qty taken as 10% of 4

Details of Cost for : 205.00 Cum Unit Quantity

Rate

tonne tonne

15.75 15.75

38500.00 87.60

cum

57.90

1000.00

cum

57.90

1050.00

cum

57.90

1050.00

cum cum cum

57.90 57.90 289.50

1100.00 1150.00 87.60

hour

6.00

14000.00

hours hours Hours tonne

6.00 6.00 6.00 4500.00

2700.00 900.00 800.00 3.00

tonne

450.00

3.00

Page 696 of 2298

0055 0054

0056

0128 0114 0139

Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonnes smooth wheeled tandem roller (6 x 0.65) Tandem Road Roller (C) LABOUR: Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction for checking line & levels Mate Beldar Skilled Beldar

Hours Hours

3.90 3.90

460.00 1550.00

Hours

3.90

1150.00

0.84 14.00 5.00

260.00 247.00 260.00 Total: 1085430.30

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 1096284.60 Cost for 205.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6149.89 Rs 6149.90

Item Code: 16.56.1 P/L Semi Dense Bituminous concrete : 25mm compacted thickness with bitumen grade of VG -30 @ 5% .. .. Details of Cost for : 7800.00 Sqm Code Description Unit Quantity Details of cost for 195 cum ( 450 tonnes) Area covered for 25mm thickness = 7800 sqm

7309 2211

0296 0297 2903 2202 0777 2208 0062 0063 0064 0069 0052 0053 0053 0055

DSR-12

(A) MATERIAL: Paving Asphalt of grade VG-30 of approved quality Carraige of Tar bitumen Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 22.50 tonnes Weight of aggregate = 450 - 22.50 = 427.50 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 427.50 / 1.5 = 285 cum Grading - II / 19mm (Nominal size) 9.5 - 4.75mm size - 57% of 285 = 162.45cum 4.75mm and below = 41% of 285 =116.85 cum Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Lime filter @ 2% (percentage by weight of aggregate) Dry hydrated lime (factory made) Carraige of Lime (B) MACHINERY Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carraige to cover the cost of loading and unloading (hence 10% qty of a Smooth Wheeled Roller 8 to 10 tonne

tonne tonne

Rate

22.50 22.50

38500.00 87.60

cum cum cum cum

81.225 81.225 116.85 279.30

1050.00 1050.00 1150.00 87.60

quint cum

85.50 6.63

220.00 87.60

hours Hours hours hours Hours tonne tonne

3.00 3.00 6.00 6.00 6.00 4500.00 450.00

23700.00 17500.00 2700.00 900.00 800.00 3.00 3.00

Hours

3.90

460.00

Page 697 of 2298

0054

0056 0128 0114

Vibratory roller 8 to 10 tonne Finish rolling with 8-10 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller (C) LABOUR Mate Beldar Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction

Hours

3.90

1550.00

Hours

3.90

1150.00

0.84 14.00

260.00 247.00

Add water charges @ 1% on

Total: 1397878.87

Day Day

Add C.P & OH @15% on 1411857.66 Cost for 7800.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 208.16 Rs 208.15

Item Code: 16.56.2 P/L Semi Dense Bituminous concrete : 25 mm compacted thickness with bitumen of grade VG- 30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

Code

7309 2211

0296 0297 2903 2202 0777 2208 0076 0064 0069 0052 0053 0053 0055 0054

DSR-12

Details of Cost for : 7800.00 Sqm Description Unit Quantity Details of cost for 195 cum ( 450 tonnes) Area covered for 25mm thickness = 7800 sqm (A) MATERIAL: Paving Asphalt of grade VG-30 of approved quality Carraige of Tar bitumen Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 22.50 tonnes Weight of aggregate = 450 - 22.50 = 427.50 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 427.50 / 1.5 = 285 cum Grading - II / 19mm (Nominal size) 9.5 - 4.75mm size - 57% of 285 = 162.45cum 4.75mm and below = 41% of 285 =116.85 cum Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Lime filter @ 2% (percentage by weight of aggregate) Dry hydrated lime (factory made) Carraige of Lime (B) MACHINERY Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carraige to cover the cost of loading and unloading (hence 10% qty of a Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne

tonne tonne

Rate

22.50 22.50

38500.00 87.60

cum cum cum cum

81.225 81.225 116.85 279.30

1050.00 1050.00 1150.00 87.60

quint cum

85.50 6.63

220.00 87.60

hour

6.00

14000.00

hours hours Hours tonne tonne

6.00 6.00 6.00 4500.00 450.00

2700.00 900.00 800.00 3.00 3.00

Hours Hours

3.90 3.90

460.00 1550.00

Page 698 of 2298

0056

0128 0114

Finish rolling with 8-10 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller Hours (C) LABOUR Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Mate Day Beldar Day

3.90

1150.00

0.84 14.00

260.00 247.00 Total: 1358278.87

Add water charges @ 1% on

Add C.P & OH @15% on 1371861.66 Cost for 7800.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 202.26 Rs 202.25

Item Code: 16.57.1 P/L Dense Bituminous concrete on prepared surface with specified graded stone agg. for wearing course, loading, tansporting to site, laying with paver finisher and rolling with RR: 40/50 mm compacted thickness with bitumen grade CRMB-60 @ 5.5% by weight

Code

7309 2211

0296 0297 0297 0298 2903 2202 0777 2208

0062 0063 0064 0069 0052 0053

DSR-12

Description Details of cost for 191 cum (450 tonnes) (A) MATERIAL Paving Asphalt of grade VG-30 of approved quality Carraige of Tar bitumen Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes Weight of aggregate = 450 - 24.75 = 425.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 425.25 / 1.5 = 283.50 cum Grading - II / 19mm (Nominal size) 13.2 - 10mm size - 30% of 283.5 = 85.05 cum 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of 283.50 =119.07 cum Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Lime filter @ 3% (percentage by weight of aggregate) Dry hydrated lime (factory made) Carraige of Lime (Considering density of lime as 1.29 MT / Cum Volume = 12.758 / (B) MACHINERY Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum

Details of Cost for : 191.00 Cum Unit Quantity

tonne tonne

Rate

24.75 24.75

38500.00 87.60

cum cum cum cum cum cum

42.525 42.525 35.44 35.44 119.07 275.00

1050.00 1050.00 1050.00 1100.00 1150.00 87.60

quint

127.60

220.00

9.89

87.60

3.00 3.00 6.00 6.00 6.00 4500.00

23700.00 17500.00 2700.00 900.00 800.00 3.00

cum hours Hours hours hours Hours tonne

Page 699 of 2298

0053 0055 0054

0056 0128 0114

0139

Add 10% on cost of carraige to cover the cost of loading and unloading on above item - Qty Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller (C) LABOUR Mate Beldar Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Skilled Beldar for checking line & levels

tonne

450.00

3.00

Hours Hours

3.90 3.90

460.00 1550.00

Hours

3.90

1150.00

Day Day

0.84 14.00

260.00 247.00

Day

5.00

260.00 Total: 1492650.86

Add water charges @ 1% on

Add C.P & OH @15% on 1507577.37 Cost for 191.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 9077.04 Rs 9077.05

Item Code: 16.57.2 P/L Dense Bituminous concrete :40/50 mm compacted thickness with bitumen of grade VG-30 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) and waste plastic additive @8% (percentage by weight of bitumen Details of Cost for : 191.00 Cum Code Description Unit Quantity Rate Details of cost for 191 cum (450 tonnes) (A) MATERIAL 7309 Paving Asphalt of grade VG-30 of approved quality tonne 24.75 38500.00 2211 Carraige of Tar bitumen tonne 24.75 87.60 Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes Weight of aggregate = 450 - 24.75 = 425.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 425.25 / 1.5 = 283.50 cum Grading - II / 19mm (Nominal size) 13.2 - 10mm size - 30% of 283.5 = 85.05 cum 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of 283.50 =119.07 cum Wate plastic @ 8% of the weight of bitumen i.e 24.75x8% 7280 0296 0297 0297 0298 2903 2202 0777 2208

DSR-12

Waste plastic additive Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Lime filter @ 3% (percentage by weight of aggregate) Dry hydrated lime (factory made) Carraige of Lime (Considering density of lime as 1.29 MT / Cum Volume = 12.758 / (B) MACHINERY

MT cum cum cum cum cum cum

1.98 42.525 42.525 35.44 35.44 119.07 275.00

40000.00 1050.00 1050.00 1050.00 1100.00 1150.00 87.60

quint

127.60

220.00

9.89

87.60

cum

Page 700 of 2298

0062 0063 0064 0069 0052 0053 0053 0055 0054

0056 0128 0114

0139

Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carraige to cover the cost of loading and unloading on above item - Qty Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller (C) LABOUR Mate Beldar Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Skilled Beldar for checking line & levels

hours Hours hours hours Hours tonne tonne

3.00 3.00 6.00 6.00 6.00 4500.00 450.00

23700.00 17500.00 2700.00 900.00 800.00 3.00 3.00

Hours Hours

3.90 3.90

460.00 1550.00

Hours

3.90

1150.00

Day Day

0.84 14.00

260.00 247.00

Day

5.00

260.00 Total: 1571850.86

Add water charges @ 1% on

Add C.P & OH @15% on 1587569.37 Cost for 191.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 9558.66 Rs 9558.65

Item Code: 16.57.3 P/L Dense Bituminous concrete :40/50 mm compacted thickness with bitumen of grade PMB-40 @5.5% and lime filler @ 3% prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. Details of Cost for : 191.00 Cum Code Description Unit Quantity Rate Details of cost for 191 cum (450 tonnes) (A) MATERIAL 0312 Bitumen grade PMB - 40 M.T. 24.75 41400.00 2211 Carraige of Tar bitumen tonne 24.75 87.60 Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes Weight of aggregate = 450 - 24.75 = 425.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 425.25 / 1.5 = 283.50 cum Grading - II / 19mm (Nominal size) 13.2 - 10mm size - 30% of 283.5 = 85.05 cum 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of 283.50 =119.07 cum 0296 0297 0297 0298 2903 2202 0777 2208

DSR-12

Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Lime filter @ 3% (percentage by weight of aggregate) Dry hydrated lime (factory made) Carraige of Lime (Considering density of lime as 1.29 MT / Cum

cum cum cum cum cum cum

42.525 42.525 35.44 35.44 119.07 275.00

1050.00 1050.00 1050.00 1100.00 1150.00 87.60

quint

127.60

220.00

Page 701 of 2298

0062 0063 0064 0069 0052 0053 0053 0055 0054

0056 0128 0114

0139

Volume = 12.758 / (B) MACHINERY Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carraige to cover the cost of loading and unloading on above item - Qty Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller (C) LABOUR Mate Beldar Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Skilled Beldar for checking line & levels

cum

9.89

87.60

hours Hours hours hours Hours tonne tonne

3.00 3.00 6.00 6.00 6.00 4500.00 450.00

23700.00 17500.00 2700.00 900.00 800.00 3.00 3.00

Hours Hours

3.90 3.90

460.00 1550.00

Hours

3.90

1150.00

Day Day

0.84 14.00

260.00 247.00

Day

5.00

260.00 Total: 1564425.86

Add water charges @ 1% on

Add C.P & OH @15% on 1580070.12 Cost for 191.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 9513.51 Rs 9513.50

Item Code: 16.57.4 P/L Dense Bituminous concrete :40/50 mmwith bitumen of grade CRMB-60 @5.5% and lime filler @ 3% prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. Details of Cost for : 191.00 Cum Code Description Unit Quantity Rate Details of cost for 191 cum (450 tonnes) (A) MATERIAL 7741 Modified Bitumen Refinery produced CRMB - 60 tonne 24.75 38800.00 2211 Carraige of Tar bitumen tonne 24.75 87.60 Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes Weight of aggregate = 450 - 24.75 = 425.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 425.25 / 1.5 = 283.50 cum Grading - II / 19mm (Nominal size) 13.2 - 10mm size - 30% of 283.5 = 85.05 cum 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of 283.50 =119.07 cum 0296 0297 0297 0298 2903 2202 0777

DSR-12

Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Lime filter @ 3% (percentage by weight of aggregate) Dry hydrated lime (factory made)

cum cum cum cum cum cum

42.525 42.525 35.44 35.44 119.07 275.00

1050.00 1050.00 1050.00 1100.00 1150.00 87.60

quint

127.60

220.00

Page 702 of 2298

2208

0062 0063 0064 0069 0052 0053 0053 0055 0054

0056 0128 0114

0139

Carraige of Lime (Considering density of lime as 1.29 MT / Cum Volume = 12.758 / (B) MACHINERY Hot mix Plant -120 TPH capacity Hot mix Plant 100 TPH Capacity Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carraige to cover the cost of loading and unloading on above item - Qty Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller (C) LABOUR Mate Beldar Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Skilled Beldar for checking line & levels

cum

9.89

87.60

hours Hours hours hours Hours tonne tonne

3.00 3.00 6.00 6.00 6.00 4500.00 450.00

23700.00 17500.00 2700.00 900.00 800.00 3.00 3.00

Hours Hours

3.90 3.90

460.00 1550.00

Hours

3.90

1150.00

Day Day

0.84 14.00

260.00 247.00

Day

5.00

260.00 Total: 1500075.86

Add water charges @ 1% on

Add C.P & OH @15% on 1515076.62 Cost for 191.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 9122.19 Rs 9122.20

Item Code: 16.57.5 P/L Dense Bituminous concrete :40/50 mm with bitumen of grade VG-30 @5.5% and lime filler @ 3% prepared in drum Type Hot Mix Plant of 60-90 TPH capacity Details of Cost for : 191.00 Cum Code Description Unit Quantity Rate Details of cost for 191 cum (450 tonnes) (A) MATERIAL 7309 Paving Asphalt of grade VG-30 of approved quality tonne 24.75 38500.00 2211 Carraige of Tar bitumen tonne 24.75 87.60 Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes Weight of aggregate = 450 - 24.75 = 425.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 425.25 / 1.5 = 283.50 cum Grading - II / 19mm (Nominal size) 13.2 - 10mm size - 30% of 283.5 = 85.05 cum 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of 283.50 =119.07 cum 0296 0297 0297 0298 2903 2202

DSR-12

Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size

cum cum cum cum cum cum

42.525 42.525 35.44 35.44 119.07 275.00

1050.00 1050.00 1050.00 1100.00 1150.00 87.60

Page 703 of 2298

0777 2208

0076 0064 0069 0052 0053 0053 0055 0054

0056

0128 0114 0139

Lime filter @ 3% (percentage by weight of aggregate) Dry hydrated lime (factory made) Carraige of Lime (Considering density of lime as 1.29 MT / Cum Volume = 12.758 / (B) MACHINERY Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carraige to cover the cost of loading and unloading on above item - Qty Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller (C) LABOUR Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Mate Beldar Skilled Beldar for checking line & levels

quint

127.60

220.00

cum

9.89

87.60

hour

6.00

14000.00

hours hours Hours tonne tonne

6.00 6.00 6.00 4500.00 450.00

2700.00 900.00 800.00 3.00 3.00

Hours Hours

3.90 3.90

460.00 1550.00

Hours

3.90

1150.00

0.84 14.00 5.00

260.00 247.00 260.00 Total: 1453050.86

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 1467581.37 Cost for 191.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 8836.22 Rs 8836.20

Item Code: 16.57.6 P/L Dense Bituminous concrete :40/50 mm thickness with bitumen of grade VG-30 @5.5% and lime filler @ 3% and waste plastic additive @8% prepared in drum Type Hot Mix Plant of 60-90 TPH capacity.

Code

7309 2211

Description Details of cost for 191 cum (450 tonnes) (A) MATERIAL Paving Asphalt of grade VG-30 of approved quality Carraige of Tar bitumen Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes Weight of aggregate = 450 - 24.75 = 425.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 425.25 / 1.5 = 283.50 cum Grading - II / 19mm (Nominal size) 13.2 - 10mm size - 30% of 283.5 = 85.05 cum 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of 283.50 =119.07 cum

Details of Cost for : 191.00 Cum Unit Quantity

tonne tonne

Rate

24.75 24.75

38500.00 87.60

1.98

40000.00

Wate plastic @ 8% of the weight of bitumen i.e 24.75x8% 7280

DSR-12

Waste plastic additive

MT

Page 704 of 2298

0296 0297 0297 0298 2903 2202 0777 2208

0076 0064 0069 0052 0053 0053 0055 0054

0056

0128 0114 0139

Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Lime filter @ 3% (percentage by weight of aggregate) Dry hydrated lime (factory made) Carraige of Lime (Considering density of lime as 1.29 MT / Cum Volume = 12.758 / (B) MACHINERY Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carraige to cover the cost of loading and unloading on above item - Qty Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller (C) LABOUR Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Mate Beldar Skilled Beldar for checking line & levels

cum cum cum cum cum cum

42.525 42.525 35.44 35.44 119.07 275.00

1050.00 1050.00 1050.00 1100.00 1150.00 87.60

quint

127.60

220.00

cum

9.89

87.60

hour

6.00

14000.00

hours hours Hours tonne tonne

6.00 6.00 6.00 4500.00 450.00

2700.00 900.00 800.00 3.00 3.00

Hours Hours

3.90 3.90

460.00 1550.00

Hours

3.90

1150.00

0.84 14.00 5.00

260.00 247.00 260.00 Total: 1532250.86

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 1547573.37 Cost for 191.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 9317.85 Rs 9317.85

Item Code: 16.57.7 P/L Dense Bituminous concrete :40/50 mm thickness with bitumen of grade PMB-40 @5.5% and lime filler @ 3% prepared in drum Type Hot Mix Plant of 60-90 TPH capacity. Details of Cost for : 191.00 Cum Code Description Unit Quantity Rate Details of cost for 191 cum (450 tonnes) (A) MATERIAL 0312 Bitumen grade PMB - 40 M.T. 24.75 41400.00 2211 Carraige of Tar bitumen tonne 24.75 87.60 Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes Weight of aggregate = 450 - 24.75 = 425.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 425.25 / 1.5 = 283.50 cum Grading - II / 19mm (Nominal size) 13.2 - 10mm size - 30% of 283.5 = 85.05 cum 10 - 5mm size = 25% of 283.50 = 70.88 cum

DSR-12

Page 705 of 2298

5mm and below = 42% of 283.50 =119.07 cum 0296 0297 0297 0298 2903 2202 0777 2208

0076 0064 0069 0052 0053 0053 0055 0054

0056

0128 0114 0139

Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Lime filter @ 3% (percentage by weight of aggregate) Dry hydrated lime (factory made) Carraige of Lime (Considering density of lime as 1.29 MT / Cum Volume = 12.758 / (B) MACHINERY Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carraige to cover the cost of loading and unloading on above item - Qty Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller (C) LABOUR Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Mate Beldar Skilled Beldar for checking line & levels

cum cum cum cum cum cum

42.525 42.525 35.44 35.44 119.07 275.00

1050.00 1050.00 1050.00 1100.00 1150.00 87.60

quint

127.60

220.00

cum

9.89

87.60

hour

6.00

14000.00

hours hours Hours tonne tonne

6.00 6.00 6.00 4500.00 450.00

2700.00 900.00 800.00 3.00 3.00

Hours Hours

3.90 3.90

460.00 1550.00

Hours

3.90

1150.00

0.84 14.00 5.00

260.00 247.00 260.00 Total: 1524825.86

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 1540074.12 Cost for 191.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 9272.70 Rs 9272.70

Item Code: 16.57.8 P/L Dense Bituminous concrete :40/50 mm thickness with bitumen of gradeCRMB-60 @5.5% and lime filler @ 3% prepared in drum Type Hot Mix Plant of 60-90 TPH capacity. Details of Cost for : 191.00 Cum Code Description Unit Quantity Rate Details of cost for 191 cum (450 tonnes) (A) MATERIAL 7741 Modified Bitumen Refinery produced CRMB - 60 tonne 24.75 38800.00 2211 Carraige of Tar bitumen tonne 24.75 87.60 Aggregate : Total weight of mix = 450 tonnes Weight of bitumen = 24.75 tonnes Weight of aggregate = 450 - 24.75 = 425.25 tonnes Taking density of aggregate as 1.50 tonnes/ cum Volume of aggregate = 425.25 / 1.5 = 283.50 cum Grading - II / 19mm (Nominal size)

DSR-12

Page 706 of 2298

13.2 - 10mm size - 30% of 283.5 = 85.05 cum 10 - 5mm size = 25% of 283.50 = 70.88 cum 5mm and below = 42% of 283.50 =119.07 cum 0296 0297 0297 0298 2903 2202 0777 2208

0076 0064 0069 0052 0053 0053 0055 0054

0056

0128 0114 0139

Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Carraige of Stone aggregate below 40 mm nominal size Lime filter @ 3% (percentage by weight of aggregate) Dry hydrated lime (factory made) Carraige of Lime (Considering density of lime as 1.29 MT / Cum Volume = 12.758 / (B) MACHINERY Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output Paver finisher Hydrostatic with sensor control 100 TPH Generator 250 kVA Front end loader 1 cum bucket capacity (incl POL) Tipper -5 Cum Add 10% on cost of carraige to cover the cost of loading and unloading on above item - Qty Smooth Wheeled Roller 8 to 10 tonne Vibratory roller 8 to 10 tonne Finish rolling with 6-8 tonne smooth wheeled tandem roller (6x0.65) Tandem Road Roller (C) LABOUR Working with HMP, mechanical broom, paver, roller, ashpalt cutter and assistance for setting out lines, levels and layout of construction Mate Beldar Skilled Beldar for checking line & levels

cum cum cum cum cum cum

42.525 42.525 35.44 35.44 119.07 275.00

1050.00 1050.00 1050.00 1100.00 1150.00 87.60

quint

127.60

220.00

cum

9.89

87.60

hour

6.00

14000.00

hours hours Hours tonne tonne

6.00 6.00 6.00 4500.00 450.00

2700.00 900.00 800.00 3.00 3.00

Hours Hours

3.90 3.90

460.00 1550.00

Hours

3.90

1150.00

0.84 14.00 5.00

260.00 247.00 260.00 Total: 1460475.86

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 1475080.62 Cost for 191.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 8881.38 Rs 8881.40

Item Code: 16.59.1 Manufacturing, S/F rectro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated rectro reflective sheeting: Mandatory/ Regulatory sign boards of 900 mm dia.

Code

2704

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details cost for 1 no. of 0.636 sqm MATERIALS: 3.14/4x(0.90x0.90)= 0.636 sqm Aluminium sheet 2 mm thick add 10% wastage = 0.064 i.e. 0.700sqm @ 5.60kg/sqm = 3.92kg Cost of Aluminium sheet 2mm thick. kilog 3.92 Carriage of aluminium sheet

Rate

210.00

Page 707 of 2298

2302

8690

10.002

0128 0114 9999

13.061.01 13.052.01

9999

3.92kg or 0.00392 M.T. High intensity retro reflective sheet = 0.70 sqm. High intensity sheet for lettering / sign and border etc. Taking 40% Area =0.28sqm,total = 0.70 + 0.28= 0.98 sqm High intensity retro - reflective sheet. Steel work Supporting frame 25x25x3mm for 900mm dia board:3.14D=3.1416x0.90=2.83 metre @1.10kg/m =3.11kg Angle iron 35x35x.5mm for fixing the support frame with vertical Tee-iron support post 2x0.05=0.10m @ 2.6 kg/m = 0.26kg Vertical post of M.S. tee of section ISNT 50x50x6mm = 3.75 metre @4.50kg/m= 16.88 kg Base plate to be welded at bottom end of tee (As hold fast) (100xl00x5mm)x7850/69)=0.39kg, total = 3.11 + 0.26 +16.88 + 0.39 = 20.64kg. Add wastage @ 5% = 1.03 Total = 20.64 + 1.03 = 21.67kg. Structural steel work riveted, bolted or welded in builtup sections, trusses etc ..and app LABOUR. Mate Beldar Cost of material for drilling holes, nut bolts & rivets, fabrication etc. Painting with synthetic enamel paint on steel work support frame 25x25x3mm =1x2.7x0.10=0.27 sqm Fixing angle 35x35x5mm = 2x0.50x0.14=0.014 sqm Vertical post Tee 50x50x6mm =3.65x0.20=0.730sqm Baseplate 100xl00x5mm Surface area = 100x100x5 = 0.022sqm

tonne

sqm

Day Day L.S.

4x0.10x0.005 = 0.002 total = 1.036 sqm Painting with synthetic enamel paint : Two or more coats on new work Finishing with Epoxy paint (two or more coats) appropriate priming coat, On steel work Rate as per Item no. 13.52.1 Sundries and hold fast etc. L.S.

0.00392

77.87

0.98

1525.00

21.67

66.52

0.01 0.25 65.00

260.00 247.00 1.49

1.07

53.87

0.636

105.51

78.00

1.49 Total: 2595.43

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 2621.38 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 4580.82 Rs 4580.35

Item Code: 16.59.2

DSR-12

Page 708 of 2298

Manufacturing, S/F rectro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated rectro reflective sheeting: Cautionary/ warning sign boards of equilateral triangular ..

Code

2704 2302

8690

10.002

0128 0114 9999

13.061.01

13.052.01

DSR-12

Description Details cost for 1 board of 0.35 sqm Materials Area 1/2x(0.90x0.78)= 0.35 sqm Aluminium sheet 2 mm thick add 10% wastage = 0.04 i.e. 0.39sqm @ 5.60kg/sqm = 2.18kg Cost of Aluiminium sheet 2mm thick. Carriage of sheet Carraige of Aluminium sheet High intensity retro reflective sheet = 0.39 sqm. High intensity sheet for lettering / sign/ symbol/ border etc. Taking 40% Area =0.16sqm, total = 0.39 + sqm 0.16 = 0.55 sqm High intensity retro - reflective sheet. Steel work Angle iron frame 25x25x3mm 3x0.90=2.70 metre @ 1.10kg/m =2.97kg Angle iron 35x35x0.50mm for fixing the support frame to Teeiron support post 2x0.05=0.10m @ 2.6 kg/m = 0.26kg Vertical post of M.S. tee of section ISNT 50x50x6mm = Ix3.65=3.65m @ 4.50kg/m= 16.43kg Base plate 100x100x5mm connected to bottom end of vertical tee. (0.10x0.10x0.005x7850kg =0.39kg, total = 2.97 + 0.26 + 16.43 + 0.39 = 20.05kg. Add wastage @ 5% = 1.00, total = 20.05 + 1.00 = 21.05kg Structural steel work riveted, bolted or welded in builtup sections, trusses etc ..and app LABOUR. Mate Beldar Cost of material for drilling holes, nut bolts & rivets, fabrication etc. Painting with synthetic enamel paint on Angle iron . support frame 25x25x3mm =1x2.7x0.10=0.27 sqm. Angle 35x35x5mm = 2x0.50x0.14=0.014 sqm Tee 50x50x6mm = 1x3.65x0.20 =0.73sqm Base plate to be welded at bottom end of Tee 100xl00x5mm 0.022 sqm Total = 1.036 sqm Painting with synthetic enamel paint : Two or more coats on new work Painting with epoxy paint on back side of aluminium sheet. 0.35 sqm Finishing with Epoxy paint (two or more coats) appropriate priming coat, On steel work

Details of Cost for : 1.00 No. Unit Quantity

kilog tonne

sqm

Day Day L.S.

Rate

2.18

210.00

0.00218

77.87

0.55

1525.00

21.05

66.52

0.01 0.25 65.00

260.00 247.00 1.49

1.036

53.87

0.35

105.51

Page 709 of 2298

9999

Sundries & hold fast etc.

L.S.

65.00

Add water charges @ 1% except on [A]+[B]+[C] i.e on

1.49 Total: 1554.77

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 1570.32 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3298.86 Rs 3298.40

Item Code: 16.60.1 Manufacturing, S/F rectro reflective overhead sinage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated rectro reflective sheeting conforming to type-III of ASTM-D-4956-01:

Code 2704

2302

8690

0588 9999 9999 9999 13.052.01

Description Details of cost for boards area 3.00x1.20=3.60 sqm Aluminium sheet 2mm thick =3.60 sqm@ 5.60kg/sqm = 20.16 kg Add 5% wastage = 1.01 kg= Total 20.16+1.01=21.17 kg Carnage of sheet. (b) High intensity retro reflective sheet. 3.60 sqm high itensity sheet for written matter. Taking 40% = 3.60x40% = 1.44 sqm. Total = 3.60 + 1.44 = 5.04 sqm. High intensity retro - reflective sheet. (c) C.P. Brass rivets screws etc. for peripheries = 2x(300+120)/30=28 nos. For vertical Rows = 2x (120/30-2)=4 nos. Total= 28 + 4 = 32nos. For wastage @ 5% =2 nos. Total = 32 +2 = 34 nos. Chromium plated Brass screws 25 mm Labour charges for drilling holes Hire charges of drill machine and sundries Hoisting board Labour charges for manufacturing of board including. fixing retro reflective sheet Finishing with Epoxy paint (two or more coats) appropriate priming coat, On steel work Aluminium sheet, Rate as per Item no. 13.52.1

Details of Cost for : 3.60 Sqm Unit Quantity

Rate

kilog

21.17

210.00

tonne

0.0212

77.87

5.04

1525.00

34.00

115.00

L.S. L.S.

52.00 390.00

1.49 1.49

L.S.

564.00 3.60

1.49 105.51

Add water charges @ 1% except on [A] i.e on

Total: 13671.39

sqm

100 N

Add C.P & OH @15% except on [A] i.e on 13808.10 Cost for 3.60 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 4516.43 Rs 4516.50

Item Code: 16.61 Providing rectro reflective regulatory sign board of 900mm dia. made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type rectroreflective sheeting as approved by Engineer-in- charge as per IRC; 67: 2001,

Details of Cost for : 1.00 No.

DSR-12

Page 710 of 2298

Code

2704

8690

10.002

0128 0114 9999

13.061.01 13.052.01 9999

Description Unit Details cost for one board of 0.635 sqm Aluminium sheet 2mm thick = 0.635 sqm. Add 10% wastage = 0.06 sqm, total = 0.635 + 0.06 = 0 695 sqn Say 0.70 sqm @ 5.60 kg/sqm =3.98 kg Cost of Alummiurfi sheet 2mm thick (X). High intensity retro reflective sheet = 0.70 sqm high intensity sheet for lettering/ sing and border etc. Taking 40% Area=0.28 sqm, total = 0.70 + 0.28 = 0.98 sqm. High intensity retro - reflective sheet (Y). Angle iron 40x40x4mm = 4x0.60=2.40@ 2.4kg/ mtr = 5.76 kg 50x50x5 mm = 2x4m =8m @ 3kg/ mtr =24.00 kg Total = 5.76 + 24.00 = 29.76 kg Structural steel work riveted, bolted or welded in builtup sections, trusses etc ..and app LABOUR. Mate Beldar Cost of material for drilling holes, nut bolts & rivets, facrication etc. @ 2% on (X+Y+A Painting with synthetic enamel paint 1x2.40x0.12=0.29 sqm 1x4.00x0.12=0.80 sqm, total = 0.29 + 0.80 = 1.09 sqm Painting with synthetic enamel paint : Two or more coats on new work Finishing with Epoxy paint (two or more coats) appropriate priming coat, On steel work Sundries & hole fast etc,

Quantity

Rate

kilog

3.98

210.00

sqm

0.98

1525.00

29.76

66.52

0.01 0.25 70.23

260.00 247.00 1.49

1.09

53.87

0.635

105.51

31.20

1.49 Total: 2545.78

Day Day L.S.

L.S.

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 2571.24 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 5062.29 Rs 5061.65

Item Code: 16.62 P/A 2.5 mm thick road marking strips (rectro reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermo- plastic paint applicator machine.

Code

8687

DSR-12

Description Details of cost for 100.00 sqm (Area covered on one day):-

Details of Cost for : 100.00 Sqm Unit Quantity

MATERIALS Thermoplastic paint screeded in paint form for 2.5 mm thick road making stripe including glass beads etc. as per specifications. 100sqm @ 5kg/5sqm =500kg. wastage @ 5% =25 kg Total = 525 kg Thermoplastic paint kg Glass beads (B-class) to be sprayed over the paint stripe @ 250 gms. Per sqm = 100x0.25=25 kg

525.00

Rate

63.00

Page 711 of 2298

8688 0033 0005 1241

0157 0139 9999 0114

Glass beads MACHINERY Hiring charges of paint applicator machine Hire charges of trucks for local shifting. LPG cylinder of heating (Commercial cylinder of 19.00 kg capacity) LABOUR Machine operator. Skilled labour. Labour for cleaning for road surface. Beldar for erecting barricades, traffic diversions, stretching ropes etc.

kg

25.00

62.00

per d Day kg

1.00 1.00 71.06

750.00 1600.00 51.00

Day Day L.S. Day

1.00 4.00 364.00 4.20

327.00 260.00 1.49 247.00

Add water charges @ 1% on

Total: 43545.82

Add C.P & OH @15% on 43981.28 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 505.78 Rs 505.80

Item Code: 16.63 P/L and making kerb channel 30 cm wide and 50 mm thick of CC 1:3:6 over 75 mm thick compacted bed of dry brick ballast of 40mm nominal size well rammed and consolidated and grouted with fine sand.

Code 0287 2260 6501 2335 0114 0115 0101 04.001.06

Details of Cost for : 10.00 m Unit Quantity

Description METERIALS Brick Aggregate 40 mm nominal size Carriage of Brick Aggregate Jamuna sand Carriage of Jamuna sand Labour for spreading, ramming and consolidation. Beldar Coolie Bhisti P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 40mmstone a

Rate

cum cum cum cum

1.00 1.00 0.08 0.08

500.00 95.22 500.00 87.60

Day Day Day

0.35 0.26 0.18 0.50

247.00 247.00 260.00 3888.20

Add water charges @ 1% except on [A] i.e on

Total: 839.70

Add C.P & OH @15% except on [A] i.e on 848.10 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 291.94 Rs 291.95

Item Code: 16.64 P/L 75 mm thick compacted bed of dry brick aggregate of 40mm nominal size i/c grouting with jamuna sand. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate METERIALS 0287 Brick Aggregate 40 mm nominal size cum 1.00 500.00 2260 Carriage of Brick Aggregate cum 1.00 95.22 6501 Jamuna sand cum 0.08 500.00 2335 Carriage of Jamuna sand cum 0.08 87.60 Labour for spreading, ramming and consolidation. 0114 Beldar Day 0.35 247.00

DSR-12

Page 712 of 2298

0115 0101

Coolie Bhisti

Day Day

0.26 0.18

Add water charges @ 1% on

247.00 260.00 Total: 839.70

Add C.P & OH @15% on 848.10 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 97.53 Rs 97.55

Item Code: 16.65 P/F post delineators (made of ABS body fitted with 2 Nos 100 mm dia.) reflective and reflectors are mounted on M.S pipe of 65 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS. 8685 Delinator each 1.00 310.00 9999 Fixing charges. L.S. 78.00 1.49 9999 Fixing material L.S. 39.00 1.49 Total: Add water charges @ 1% on 484.33 Add C.P & OH @15% on 489.17 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 562.55 Rs 562.55

Item Code: 16.66.1 Excavating holes upto 0.10 Cum i/c getting out the excavated soil then returing the soil as required in layer: All kind of soil.

Code

02.008.01

Description Details of cost for 30 holes Earth work 30x0.10=3.00cum Extra labour for filling and ramming E/W excavation in foundation trenches .. .. All kinds of soil.

9999

(B) Sundries

Details of Cost for : 30.00 Nos Unit Quantity

Rate

Cum

3.00

130.78

L.S.

13.52

1.49 Total: 20.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 20.34 Cost for 30.00 Nos Rate per Each: Rate as per DSR-12:

Rs 13.86 Rs 19.75

Item Code: 16.67 P/F at or near ground level factory made RCC pavement slab of M-30 grade of size 450x 450x 50 mm in footpath to the required level and line over a bed of 20mm ave CM 1: 3 C.sand. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS 8694 Precast pavement slab 450 x 450 x 50mm (M-30) each 48.00 55.00 9999 carriage of slab L.S. 52.00 1.49

DSR-12

Page 713 of 2298

03.010 0155 0100 0114 0101 9999

Cement mortar 1:5 (1 cement : 5 coarse sand) LABOUR Mason. Bandhani Beldar Bhisti Sundries

Cum

0.25

3129.96

Day Day Day Day L.S.

1.10 1.10 0.55 0.27 10.79

287.00 260.00 247.00 260.00 1.49 Total: 4323.80

Add water charges @ 1% on

Add C.P & OH @15% on 4367.04 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 502.21 Rs 502.20

Item Code: 16.68 P/F 60 mm thick factory made C.C interlocking paver Block of M-30 grade made by block making machine over and i/c 50 mm thick bed of C. sand, filling the joints. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 8689 Interlocking C.C. paver block ( 60 mm thick), M.30 sqm 10.00 325.00 Bedding Layer 50mm thick 0982 Coarse sand =10x0.050=0.50 cum cum 0.50 1120.00 2203 Carriage of coarse sand cum 0.50 87.60 0983 Fine sand cum 0.15 640.00 2261 Carraige of Fine sand. cum 0.15 87.60 Laying charges (Bassed on actual observation) 0123 0124 0114 0115

Mason I class Mason II class Beldar Coolie

Day Day Day Day

0.50 0.50 1.00 0.50

Add water charges @ 1% on

301.00 273.00 247.00 247.00 Total: 4620.44

Add C.P & OH @15% on 4666.64 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 536.66 Rs 536.65

Item Code: 16.69 P?L at or near ground level factory made kerb stone of M-25 grade cement. Code 8686

03.008 0123 0124 0114 0115

Description Precast C.C. Kerb stone M - 25 247x0.40x0.375x0.20=7.41 cum mortar 1:3 for fixing join Cement mortar 1:3 (1 cement : 3 coarse sand) Labour for fixing of Kerb stone Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar Coolie

Details of Cost for : 7.50 Cum Unit Quantity

cum Cum

7.41 0.073

4025.00 4145.53

Day Day Day Day

2.50 2.50 2.50 1.65

301.00 273.00 247.00 247.00 Total: 32587.92

Add water charges @ 1% on

DSR-12

Rate

Page 714 of 2298

Add C.P & OH @15% on 32913.80 Cost for 7.50 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5046.78 Rs 5046.80

Item Code: 16.70.1 P/F G.I. chain link fabric fencing of required width in mesh size 50x50 mm i/c stren- gthening with 2 mm dia. wire: Made of G.I. of dia. 4 mm. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIAL. G.I. chain link 50x50 mm mesh = 10.00 sqm. Wastage5% = 0.50sqm Total= 10.50 sqm 8695 Chain link fabric fancing mesh of size sqm 10.50 258.00 50x50mm made of G.I. wire of dia. 4mm. 9999 Carriage. L.S. 156.00 1.49 LABOUR 0103 Blacksmith 2nd class Day 2.14 273.00 0114 Beldar Day 1.62 247.00 9999 Sundries including G.I. wire, nuts and bolts and warshers. L.S. 174.75 1.49

Add water charges @ 1% on

Total: 4186.18

Add C.P & OH @15% on 4228.04 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 486.23 Rs 486.20

Item Code: 16.70.2 P/F G.I. chain link fabric fencing of required width in mesh size 50x50 mm i/c stren- gthening with 2 mm dia. wire: Made of GI of dia. 4 mm, PVC coated in required colour and shade.

Code

8696

9999 0103 0114 9999

Description MATERIAL. G.I. chain link 50x50 mm mesh PVC coated = 10sqm wastase@5%= 0.50 sqm Total = 10.50 sqm. Chain link fabric fancing mesh of size 50x50mm made of G.I. wire of dia. 4mm, PVC coated to outer dia. 5mm. Carriage. LABOUR Blacksmith 2nd class Beldar Sundries including G.I. wire, nuts and bolts and washers.

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

sqm

10.50

285.00

L.S.

156.00

1.49

Day Day L.S.

2.14 1.62 174.75

273.00 247.00 1.49

Add water charges @ 1% on

Total: 4469.68

Add C.P & OH @15% on 4514.38 Cost for 10.00 Sqm

DSR-12

Page 715 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 519.15 Rs 519.15

Item Code: 16.71 P/F G.I. chain link fabric fencing of required width in mesh size 25 x 25 mm made of G.I. wire of dia. 3 mm i/c strengthening with 2 mm dia. wire. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIAL. G.I. chain link 25x25 mm mesh = 10.00 sqm. wastase@5%= 0.50 sqm 8697 Cham link fabric fancing mesh of size sqm 10.50 340.00 25x25mm made of G.I. wire of dia. 3mm. 9999 Carriage. L.S. 156.00 1.49 LABOUR 0103 Blacksmith 2nd class Day 2.14 273.00 0114 Beldar Day 1.62 247.00 9999 Sundries including G.I. wire, nuts and bolts and warshers. L.S. 174.75 1.49

Add water charges @ 1% on

Total: 5047.18

Add C.P & OH @15% on 5097.65 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 586.23 Rs 586.25

Item Code: 16.72 S/S stone (for stone pitching) 22.5 cm thick at site. Code 1158 2215

Description

Details of Cost for : 2.25 Cum Unit Quantity

MATERIALS 22.5 cm thick stone (Hard) cum Carriage by mechanical transport i/c loading unloading and cum stacking

Rate

2.25 2.25

420.00 103.06

Add water charges @ 1% on

Total: 1176.89

Add C.P & OH @15% on 1188.66 Cost for 2.25 Cum Rate per One Cum: Rate as per DSR-12:

Rs 607.54 Rs 607.55

Item Code: 16.73 Dry stone pitching 22.5 cm thick laid in required profile. Code 0123 0124 0114 0115 9999

Description LABOUR Mason 1st class. Mason 2nd class. Belder Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day Day Day L.S.

1.08 1.08 2.15 1.61 6.76

Add water charges @ 1% on

DSR-12

Rate 301.00 273.00 247.00 247.00 1.49 Total: 1558.71

Page 716 of 2298

Add C.P & OH @15% on 1574.30 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 181.05 Rs 181.05

Item Code: 16.74.1 75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with : Moorum.

Code 0810 2265

0114 0101

Description

Details of Cost for : 100.00 Sqm Unit Quantity

MATERIALS Moorum. cum Carriage by mechanical transport i/c loading unloading and cum stacking LABOUR Beldar Day Bhisti Day

Rate

7.50 7.50

450.00 87.60

1.64 0.13

247.00 260.00 Total: 4470.88

Add water charges @ 1% on

Add C.P & OH @15% on 4515.59 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 51.93 Rs 51.95

Item Code: 16.74.2 75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with : Stone agg. 20 mm n size. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate MATERIALS 0295 Stone aggregate 20mm nominal size cum 7.50 1050.00 100sqm x7.50cm= 7.50 cum 2202 Carriage of stone aggregate 20mm nominal size cum 7.50 87.60 LABOUR 0114 Beldar Day 2.05 247.00 0101 Bhisti Day 0.13 260.00 Total: Add water charges @ 1% on 9072.15 Add C.P & OH @15% on 9162.87 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 105.37 Rs 105.35

Item Code: 16.74.3 75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with : Stone agg. 40 mm n size. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate MATERIALS Stone aggregate .40 mm nominal size 0293 100sqm x7.50cm= 7.50 cum cum 7.50 950.00

DSR-12

Page 717 of 2298

2206 0114 0101

Carriage of stone aggregate 40mm nominal size . LABOUR Beldar Bhisti

cum

7.50

95.22

Day Day

2.05 0.13

247.00 260.00 Total: 8379.30

Add water charges @ 1% on

Add C.P & OH @15% on 8463.09 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 97.33 Rs 97.35

Item Code: 16.75 P/L C.C pavement of mix M-25 with ready mixed concrete from batching plant. concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc complete.

Code

05.037.01 9999 9999

Description

Details of Cost for : 1.00 Cum Unit Quantity

MATERIALS Ready mix concrete M 25 = 1.00 cum. i/c placing of concrete, vibrating, leveling etc. P/L RM M-25 grade concrete for RCC work (using cement @ Cum 330 kg/cum) - All work upto plinth Operational charges for vacuum dewatering system i/c screed L.S. vibration , placing of fil T& P charges i/c consumable power charges, loading , L.S. unloading and hire charges of equipme

Rate

1.00

5590.62

57.20

1.49

41.60

1.49

Add water charges @ 1% except on [A] i.e on

Total: 147.21

Add C.P & OH @15% except on [A] i.e on 148.68 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 5761.60 Rs 6067.10

Item Code: 16.76 Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. Details of Cost for : -1.00 Cum Code Description Unit Quantity Cement for M-25 mix = 0.410 t Cement for M- 20 mix = 0.383 t 0367 Difference tonne 0.027 2209 Carriage of Cement tonne 0.027 Plasticizer for M-25 mix = 2.050kg Plasticizer for M- 20 mix= 1.915 kg 7318 Difference = 0.135 kg kilog 0.135 Add water charges @ 1% on

Rate

5000.00 77.87

36.50 Total: 142.03

Add C.P & OH @15% on 143.45 Cost for -1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

-Rs 164.97 -Rs 164.95

Page 718 of 2298

Item Code: 16.77 Scarifying the existing bituminous road surface to a depth of 50 mm. Code 0128 0114 0038 0014 0017

Details of Cost for : 100.00 Sqm Unit Quantity

Description LABOUR Mate Beldar MACHINERY Tractor with ripper attachment. Front end loader Hire and runining charges of tipper

Day Day per d Day Day

Rate

0.01 0.25

260.00 247.00

0.01 0.025 0.0288

1350.00 5000.00 1700.00 Total: 251.81

Add water charges @ 1% on

Add C.P & OH @15% on 254.33 Cost for 100.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 2.92 Rs 2.90

Item Code: 16.78.1 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC ... With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Description Details of cost for 225 cum (450 tonnes) (A) MATERIAL : Close graded granular sub-base material as per Grading-I of specifications Close graded granular sub-base material as per Grading-I of specifications 53mm to 9.5mm @ 50% = 144 cum 9.5 mm to 2.36mm @ 20% = 57 cum 2.36mm below @ 30% = 86.40 cum

0292 0297 2206

Stone Aggregate (Single size) : 50 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Carraige of Stone aggregate 40 mm nominal size and above

cum cum cum

72.00 72.00 72.00

900.00 1050.00 95.22

2202 1179 2202 2903 2904 2203

Carraige of Stone aggregate below 40 mm nominal size Crushed stone 2.36 mm to 12.5 mm size Carraige of Stone aggregate below 40 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Stone chippings/ screenings 150 micron nominal size Carraige of Coarse sand (stone chippings) (B) MACHINERY Wet Mix Plant 60 TPH Generator 100 KVA/125 KVA Water Tanker 5 to 6 KL capacity (5 km lead with one trip per hour) Front end loader 1 cum bucket capacity (incl POL) Tipper 10 tonne capacity( taking lead= 10 Km) =450x10 =4500 t.Km

cum cum cum cum cum cum

72.00 57.00 57.00 43.20 43.20 86.40

87.60 915.00 87.60 1150.00 1150.00 87.60

hour hour hour

6.00 6.00 4.50

1200.00 700.00 150.00

Hours

6.00

800.00

Tipper -5 Cum Add 10% of cost of carriage to cover loading and unloading

tonne

4500.00

3.00

(Qty taken as 10% of 4500 = 45

tonne

450.00

3.00

0059 0070 0057 0052

0053 0053

DSR-12

Details of Cost for : 225.00 Cum Unit Quantity

Code

Rate

Page 719 of 2298

0050 0054 0128 0139 0114

Motor Grader 3.35 metre blade Vibratory roller 8 to 10 tonne (C) LABOUR : Mate Skilled Beldar (for floor rubbing etc.) Beldar

tonn Hours

6.00 6.00

2450.00 1550.00

Day Day Day

0.40 2.00 8.00

260.00 260.00 247.00 Total: 375964.88

Add water charges @ 1% on

Add C.P & OH @15% on 379724.53 Cost for 225.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1940.81 Rs 1940.80

Item Code: 16.78.2 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC ... With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Description Details of cost for 225 cum (450 tonnes) (A) MATERIAL : Close graded granular sub-base material as per Grading-I of specifications Close graded granular sub-base material as per Grading-I of specifications 26.5mm to 9.5mm @ 35% = 100.80 cum 9.5 mm to 2.36mm @ 25% = 72 cum 2.36mm below @ 40% = 115.20 cum

0294 0297 2206

Stone Aggregate (Single size) : 25 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Carraige of Stone aggregate 40 mm nominal size and above

cum cum cum

50.40 50.40 50.40

1000.00 1050.00 95.22

2202 1179 2202 2903 2904 2203

Carraige of Stone aggregate below 40 mm nominal size Crushed stone 2.36 mm to 12.5 mm size Carraige of Stone aggregate below 40 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Stone chippings/ screenings 150 micron nominal size Carraige of Coarse sand (stone chippings) (B) MACHINERY Wet Mix Plant 60 TPH (75 tonne capacity) Generator 100 KVA/125 KVA Water Tanker 5 to 6 KL capacity (5 km lead with one trip per hour) Front end loader 1 cum bucket capacity (incl POL) Tipper 10 tonne capacity( taking lead= 10 Km) =450x10 =4500 t.Km

cum cum cum cum cum cum

50.40 72.00 72.00 57.60 57.60 115.20

87.60 915.00 87.60 1150.00 1150.00 87.60

hour hour hour

6.00 6.00 4.50

1200.00 700.00 150.00

Hours

6.00

800.00

Tipper -5 Cum Add 10% of cost of carriage to cover loading and unloading

tonne

4500.00

3.00

(Qty taken as 10% of 4500 = 45 Motor Grader 3.35 metre blade Vibratory roller 8 to 10 tonne (C) LABOUR : Mate Skilled Beldar (for floor rubbing etc.)

tonne tonn Hours

450.00 6.00 6.00

3.00 2450.00 1550.00

0.40 2.00

260.00 260.00

0059 0070 0057 0052

0053 0053

0050 0054 0128 0139

DSR-12

Details of Cost for : 225.00 Cum Unit Quantity

Code

Day Day

Rate

Page 720 of 2298

0114

Beldar

Day

8.00

Add water charges @ 1% on

247.00 Total: 385617.85

Add C.P & OH @15% on 389474.03 Cost for 225.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 1990.65 Rs 1990.65

Item Code: 16.78.3 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC ... With material conforming to Grade-III (size range 26.5 mm to 0.075 mm ) having CBR Value-20

Code

Details of Cost for : 225.00 Cum Unit Quantity

Description Details of cost for 225 cum (450 tonnes) (A) MATERIAL : Close graded granular sub-base material as per Grading-III of specifications

Rate

9.5 mm to 4.75mm @ 35% = 100.80 cum 4.75 to 2.36mm @ 12.5% = 36.00 cum 2.36mm and below @ 52.5% = 151.20 cum 1179 2202 1179 2202 2903 2904 2203 0059 0070 0057 0052

0053 0053

0050 0054 0128 0139 0114

Crushed stone 2.36 mm to 12.5 mm size Carraige of Stone aggregate below 40 mm nominal size Crushed stone 2.36 mm to 12.5 mm size Carraige of Stone aggregate below 40 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Stone chippings/ screenings 150 micron nominal size Carraige of Coarse sand (B) MACHINERY Wet Mix Plant 60 TPH (75 tonne capacity) Generator 100 KVA/125 KVA Water Tanker 5 to 6 KL capacity (5 km lead with one trip per hour) Front end loader 1 cum bucket capacity (incl POL) Tipper 10 tonne capacity( taking lead= 10 Km) =450x10 =4500 t.Km

cum cum cum cum cum cum cum

100.80 100.80 36.00 36.00 75.60 75.60 151.20

915.00 87.60 915.00 87.60 1150.00 1150.00 87.60

hour hour hour

6.00 6.00 4.50

1200.00 700.00 150.00

Hours

6.00

800.00

Tipper -5 Cum Add 10% of cost of carriage to cover loading and unloading

tonne

4500.00

3.00

(Qty taken as 10% of 4500 = 45 Motor Grader 3.35 metre blade Vibratory roller 8 to 10 tonne (C) LABOUR : Mate Skilled Beldar (for floor rubbing etc.) Beldar

tonne tonn Hours

450.00 6.00 6.00

3.00 2450.00 1550.00

0.40 2.00 8.00

260.00 260.00 247.00 Total: 382605.80

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 386431.86 Cost for 225.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 1975.10 Rs 1975.10

Page 721 of 2298

Item Code: 16.79 P/L spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) compacting with vibratory roller of 8 to 10 tonne capacity .. Details of Cost for : 225.00 Cum Code Description Unit Quantity Rate Details of cost for 225 cum (495 tonne) (A) MATERIAL : Conforming to table ...... 45mm to22.4mm @ 30% = 89.10 cum Qty for 0292,0293,0294,0295 codes = 89.10 /4 = 22.275 cum Qty for 2206, 2202 codes = 89.10 /2 = 44.55 cum 22.4 mm to 2.36mm @ 40% = 118.80 cum Qty for 0294,0295 codes = 118.80 /4 = 29.70 um Qty for 1179 code = 118.80 /2 = 59.40 cum 2.36 mm to 75 micron @ 30% = 89.10 cum Qty for 2903, 2904 codes = 89.10/2 = 44.55 cum 0292 Stone Aggregate (Single size) : 50 mm nominal size cum 22.275 900.00 0293 Stone Aggregate (Single size) : 40 mm nominal size cum 22.275 950.00 0294 Stone Aggregate (Single size) : 25 mm nominal size cum 22.275 1000.00 0295 Stone Aggregate (Single size) : 20 mm nominal size cum 22.275 1050.00 2206 Carraige of Stone aggregate 40 mm nominal size and above cum 44.55 95.22 2202 0294 0295 1179 2202 2903 2904 2203 0059 0070 0057 0052

0053 0053

0065 0054 0128 0139 0114

Carraige of Stone aggregate below 40 mm nominal size Stone Aggregate (Single size) : 25 mm nominal size Stone Aggregate (Single size) : 20 mm nominal size Crushed stone 2.36 mm to 12.5 mm size Carraige of Stone aggregate below 40 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Stone chippings/ screenings 150 micron nominal size Carraige of stone chippings (same as coarse sand) (B) MACHINERY : Wet Mix Plant 60 TPH @75 tonne capacity Generator 100 KVA/125 KVA Water Tanker 5 to 6 KL capacity 5 km lead with one trip per hour Front end loader 1 cum bucket capacity (incl POL) Tipper 10 tonne capacity( taking Iead= 10 Km) =495 x 10 =4950 t.km

cum cum cum cum cum cum cum cum

44.55 29.70 29.70 59.40 118.80 44.55 44.55 89.10

87.60 1000.00 1050.00 915.00 87.60 1150.00 1150.00 87.60

hour

6.60

1200.00

hour hour

6.00 3.00

700.00 150.00

Hours

6.00

800.00

Tipper -5 Cum Add 10% of cost of carriage to cover loading and unloading

tonne

4950.00

3.00

Qty = 4950 x 10 / 100 = 495 Paver finisher Mechanical 100 TPH Vibratory roller 8 to 10 tonne (C) LABOUR : Mate Skilled Beldar Beldar

tonne hour Hours

495.00 6.00 3.90

3.00 1000.00 1550.00

0.48 2.00 10.00

260.00 260.00 247.00 Total: 379794.97

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 383592.92 Cost for 225.00 Cum Rate per One Cum:

DSR-12

Rs 1960.59

Page 722 of 2298

Rate as per DSR-12:

Rs 1960.60

Item Code: 16.80 Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383 .. Details of Cost for : 450.00 Cum Code Description Unit Quantity Rate Details of cost for 450 cum (990 tonne) (A) MATERIAL : Crushed stone coarse aggregate of 25mm & 12.5 mm nominal sizes graded as per specifications @ 0.90 cum/cum of concrete conforming to specification. = 405 cum

0294 0296 0982 0367 2202 2203 2209 0052 0066 0069 0065 0054 0057 0053 0053

Coarse Sand @0.45 m3 per cum of concrete = 203 cum Cement @150 Kg. per cum of concrete = 67,50 cum Qty for 0294,0296 codes = 405 / 2 = 202.50 cum Stone Aggregate (Single size) : 25 mm nominal size Stone Aggregate (Single size) : 12.5 mm nominal size Coarse sand (zone III) Portland Cement Carraige of Stone aggregate below 40 mm nominal size Carraige of Coarse sand Carraige of Cement (B) MACHINERY : Front end loader 1 cum bucket capacity (incl POL) Batching and Mixing Plant @ 75 cum per hour Generator 250 kVA Paver finisher Mechanical 100 TPH Vibratory roller 8 to 10 tonne Water Tanker 5 to 6 KL capacity Tipper (990 tonne x 10 km) Tipper -5 Cum Add 10% of cost of carriage to cover loading and unloading

cum cum cum tonne cum cum tonne

202.50 202.50 203.00 67.50 405.00 203.00 67.50

1000.00 1050.00 1120.00 5000.00 87.60 87.60 77.87

Hours hour hours hour Hours hour

6.00 6.00 6.00 6.00 8.00 8.00

800.00 2500.00 900.00 1000.00 1550.00 150.00

tonne

9900.00

3.00

tonne

990.00

3.00

1.12 6.00 22.00

260.00 260.00 247.00 Total: 1123257.23

Qty = 9900 X * 10/100 = 990

0128 0139 0114

(C) LABOUR : Mate Skilled Beldar (for floor rubbing etc.) Beldar

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 1134489.80 Cost for 450.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 2899.25 Rs 2896.15

Item Code: 16.81 Providing and erecting 2.00 metre high temporary barricading at site as per drawing/ direction of Engineer-in-Charge

Code

Details of Cost for : 2.50 m Description Unit Quantity Details of cost for 2. 5metre (for one no. barricading board of size 2.50X 2.00 m)

Rate

(A) MATERIAL:

DSR-12

Page 723 of 2298

1681-X

Sub analysis item for material component of Item No. 16.81

m

2.50

39.07

1681-Y

Sub-analysis item for fabication charges in item no. 16.81

m

2.50

607.20

11.00

20.72

11.00

53.87

Add water charges @ 1% except on [A]+[B] i.e on

Total: 1615.68

13.050.03

13.061.01

(C) Priming coat = 2x2.50 x2.00 x 1.10 = 11.00 Sqm. Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise (D) Painting with synthetic enamel paint = 2x2.50 x2.00 x 1.10 = 11.00 sqm Painting with synthetic enamel paint : Two or more coats on Sqm new work

Add C.P & OH @15% except on [A]+[B] i.e on 1631.84 Cost for 2.50 m Rate per One Metre: Rate as per DSR-12:

Rs 1078.84 Rs 1078.65

Item Code: 16.82 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc. ..

Code 0114 0115 9999

Description LABOUR: Beldar Coolie Sundries

Details of Cost for : 100.00 m Unit Quantity Day Day L.S.

0.75 3.00 2.00

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 929.23

Add C.P & OH @15% on 938.52 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 10.79 Rs 10.80

Item Code: 16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc.,

Code 0114 0115 9999

Description LABOUR: Beldar Coolie Sundries

Details of Cost for : 10.00 Sqm Unit Quantity Day Day L.S.

0.25 1.00 2.70

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 312.77

Add C.P & OH @15% on 315.90 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 36.33 Rs 36.35

Page 724 of 2298

Item Code: 16.84 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand ..

Code

0982 2203 0983 2261 0123 0124 0114 0115

Description MATERIALS: Bedding layer 50mm thick Coarse sand (zone III) Qty = 10 x 0.05 = 0.50 cum Carraige of Coarse sand Fine sand (zone IV) Carraige of Fine sand LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar Coolie

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

cum

0.50

1120.00

cum cum cum

0.50 0.15 0.15

87.60 640.00 87.60

Day Day Day Day

0.50 0.50 1.00 0.50

301.00 273.00 247.00 247.00 Total: 1370.44

Add water charges @ 1% on

Add C.P & OH @15% on 1384.14 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 159.18 Rs 159.20

Item Code: 16.85 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIALS: Number of kerb stones = 100 /0.405 = 247 Nos. Qty. = 247 x 0.40 x 0.375 x 0.20 = 7.41cum No, of joints = 247 -1 = 246 Nos. Cement Mortar 1:3 for fixing joints = 246 x [(0.115 + 0.20)/2 x 0.375 x 0.005] = 0.073 cum 03.008 0123 0124 0114 0115

Cement mortar 1:3 (1 cement : 3 coarse sand) LABOUR: Mason (brick layer) 1st class Mason (brick layer) 2nd class Beldar Coolie

Cum

0.073

4145.53

Day Day Day Day

2.50 2.50 2.50 1.65

301.00 273.00 247.00 247.00 Total: 2762.67

Add water charges @ 1% on

Add C.P & OH @15% on 2790.30 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 32.09 Rs 32.10

Item Code: 17.1.1

DSR-12

Page 725 of 2298

P/F WC pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level flushing cistern : White Vitreous china Orissa pattern W.C. pan 580x440mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 1954 WVC Orissa pattern WC pan - 580x440mm each 1.00 750.00 7358 10 ltr low level PVC flushing cistern with accessories and flush each 1.00 640.00 pipe. 1896 100mm SCI 'P' or 'S' trap with vent horn each 1.00 308.00 9999 Cement, sand and grit etc. L.S. 26.91 1.49 9999 Carriage of materials

0116 0123 0114

LABOUR: Fitter grade-I Mason I class Beldar

L.S.

26.91

1.49

Day Day Day

1.25 0.50 1.00

301.00 301.00 247.00 Total: 2551.95

Add water charges @ 1% on

Add C.P & OH @15% on 2577.47 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2964.09 Rs 2964.10

Item Code: 17.1.2 P/F WC with PVC low level flushing cistern with all fittings SS Orissa pattern WC pan size 585 x 480 mm Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one pan MATERIALS 7805 Salem Stainless steel AISI - 304 (18/8) Orrisa each 1.00 pattern W.C. pan 724mm X 578mm 7358 10 litre low level P.V.C. flushing cistern with fitting accessories each 1.00 and flush pipe 1896 100 mm Sand C.I. ‘P’ or’S trap with vent horn each 1.00 9999 Cement, sand and grit etc. L.S. 26.91 9999 Carriage of materials L.S. 26.91 LABOUR 0116 Fitter 1st class Day 1.25 0123 Mason 1st class Day 0.50 0114 Beldar Day 1.00 Add water charges @ 1% on

Rate

3630.00 640.00 308.00 1.49 1.49 301.00 301.00 247.00 Total: 5431.95

Add C.P & OH @15% on 5486.27 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6309.21 Rs 6309.20

Item Code: 17.2.1 P/F white vitreous china pedestal type water closet- 10 litre LL white P.V.C. flushing cistern - : W.C. pan white solid plastic seat and lid Details of Cost for : 1.00 No. Code Description Unit Quantity Rate

DSR-12

Page 726 of 2298

9999

MATERIALS: White solid plastic seat and lid with CP B hinges & rubber each buffer White glazed pedastal type W.C pan each 10 ltr low level PVC flushing cistern with accessories and flush each pipe. Cement, sand and grit etc. L.S. Carriage of materials

0116 0123 0114

LABOUR: Fitter grade-I Mason I class Beldar

1875 1955 7358 9999

1.00

310.00

1.00 1.00

680.00 640.00

26.91

1.49

L.S.

26.91

1.49

Day Day Day

1.25 0.50 1.00

301.00 301.00 247.00 Total: 2483.95

Add water charges @ 1% on

Add C.P & OH @15% on 2508.79 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2885.11 Rs 2885.10

Item Code: 17.2.2 P/F white vitreous china pedestal type water closet- 10 litre LL white P.V.C. flushing cistern - : W.C. pan with ISI marked black solid plastic seat and lid Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 1876 Black solid plastic seat and lid with CP brass hinges, rubber each 1.00 293.00 buffer 1955 White glazed pedastal type W.C pan each 1.00 680.00 7358 10 ltr low level PVC flushing cistern with accessories and flush each 1.00 640.00 pipe. 9999 Cement, sand and grit etc. L.S. 26.91 1.49 9999 Carriage of materials

0116 0123 0114

LABOUR: Fitter grade-I Mason I class Beldar

L.S.

26.91

1.49

Day Day Day

1.25 0.50 1.00

301.00 301.00 247.00 Total: 2466.95

Add water charges @ 1% on

Add C.P & OH @15% on 2491.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2865.36 Rs 2865.35

Item Code: 17.3.1 P/F white vitreous china pedestal type water closet- 10 litre LL white WVC flushing cistern - : W.C. pan with ISI marked white solid plastic seat and lid Details of Cost for : 1.00 No. Code Description Unit Quantity Rate

DSR-12

Page 727 of 2298

1875 1955 7006 9999 1350 9999 9999 9999 9999 0116 0123 0114

Details of cost for one pan MATERIALS White solid plastic seat and lid with C.P. brass hinges and rubber buffers complete White glazed pedestal type W.C. pan 10 litre white glazed vitreous china low level flushing cistern with fitting and bracket a Overflow arrangement and specials for oveflow pipe Mosquito proof coupling of the approved municipal design Plugs,screws etc. Red lead, white lead and gasket Cement, sand and grit etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

each

1.00

310.00

each each

1.00 1.00

680.00 1550.00

L.S. each

62.79 1.00

1.49 27.00

L.S. L.S. L.S. L.S.

13.52 16.12 26.91 26.91

1.49 1.49 1.49 1.49

Day Day Day

1.00 1.00 1.00

301.00 301.00 247.00 Total: 3633.92

Add water charges @ 1% on

Add C.P & OH @15% on 3670.26 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 4220.80 Rs 4220.80

Item Code: 17.3.2 P/F white vitreous china pedestal type water closet- 10 litre LL white WVC flushing cistern - : W.C. pan with ISI marked black solid plastic seat and lid Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one pan MATERIALS 1876 Black solid plastic seat and lid with C.P. brass hinges and each 1.00 293.00 rubber buffers complete 1955 Vitreous china pedestal type W.C. pan each 1.00 680.00 7006 10 litre white vitreous china low level flushing cistern with each 1.00 1550.00 fitting and bracket and 40 9999 Overflow arrangement and specials for oveflow pipe L.S. 62.79 1.49 1350 Mosquito proof coupling of the approved municipal design each 1.00 27.00 9999 9999 9999 9999 0116 0123 0114

Plugs ,screws etc. Red lead, white lead and gasket Cement, sand and grit etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

L.S. L.S. L.S. L.S.

13.52 16.12 26.91 26.91

1.49 1.49 1.49 1.49

Day Day Day

1.00 1.00 1.00

301.00 301.00 247.00 Total: 3616.92

Add water charges @ 1% on

Add C.P & OH @15% on 3653.09 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 4201.05 Rs 4201.05

Page 728 of 2298

Item Code: 17.4.1 P/F WVC flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one no. MATERIALS 1913 Flat back or angular lipped front urinal basin of 430x260x350 each 1.00 460.00 mm and 340x410x265 mm sizes 7359 5 litre PVC automatic flushing cistern with fitting each 1.00 490.00 7375 Standard size G.I. Flush pipe with brass unions and clamps each 1.00 440.00 including C.P. brass spreaders 9999 Red lead, white lead and gasket L.S. 13.52 1.49 9999 Plugs ,screws etc. L.S. 13.52 1.49 9999 Cement, sand and grit etc. L.S. 13.52 1.49 9999 Painting of fittings etc. L.S. 39.00 1.49 9999 Carriage of materials L.S. 26.91 1.49 LABOUR 0116 Fitter 1st class Day 0.88 301.00 0123 Mason 1st class Day 0.88 301.00 0114 Beldar Day 1.50 247.00 Total: Add water charges @ 1% on 2448.89 Add C.P & OH @15% on 2473.38 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2844.39 Rs 2844.40

Item Code: 17.4.2 P/F WVC flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes - automatic flushing cistern - Range of two urinal basins - 5 litre white PVC tank

Code

1913 7359 7376 9999 9999 9999 9999 9999 0116 0123 0114

Description Details of cost for one no. MATERIALS Flat back or angular lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes 5 litre PVC automatic flushing cistern with fitting Standard size G.I. Flush pipe with brass unions and clamps including C.P. brass spreaders Red lead, white lead and gasket Plugs,screws etc. Cement, sand and grit etc. Painting of fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

2.00

460.00

each each

1.00 1.00

490.00 1010.00

L.S. L.S. L.S. L.S. L.S.

20.28 20.28 20.28 39.00 26.91

1.49 1.49 1.49 1.49 1.49

Day Day Day

1.50 1.50 2.00

301.00 301.00 247.00 Total: 4005.87

Add water charges @ 1% on

Add C.P & OH @15% on 4045.93 Cost for 1.00 No.

DSR-12

Page 729 of 2298

Rate per Each: Rate as per DSR-12:

Rs 4652.82 Rs 4652.80

Item Code: 17.4.3 P/F WVC flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern.

Code

1913 7361 7377 9999 9999 9999 9999 9999 0116 0123 0114

Description Details of cost for one no. MATERIALS Flat back or angular lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes 10 litre PVC automatic flushing cistern with fitting Standard size G.I. Flush pipe with brass unions and clamps including C.P. brass spreaders Red lead, white lead and gasket Plugs ,screws etc. Cement, sand and grit etc. Painting of fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

3.00

460.00

each each

1.00 1.00

530.00 1240.00

L.S. L.S. L.S. L.S. L.S.

33.67 33.67 33.67 39.00 40.30

1.49 1.49 1.49 1.49 1.49

Day Day Day

2.00 2.00 3.00

301.00 301.00 247.00 Total: 5363.67

Add water charges @ 1% on

Add C.P & OH @15% on 5417.31 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6229.91 Rs 6229.90

Item Code: 17.4.4 P/F white Vitreous china lip- ped urinal with PVC automatic flushing cistern etc Range of 4 urinal basins with 10 lt PVC cistern

Code 1913 7361 7378 9999 9999 9999 9999 9999 0116 0123 0114

DSR-12

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS Flat back or angular lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes 10 litre PVC automatic flushing cistern with fitting Standard size G.I. Flush pipe with brass unions and clamps including C.P. brass spreaders Red lead, white lead and gasket Plugs,screws etc. Cement, sand and grit etc. Painting of fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Rate

each

4.00

460.00

each each

1.00 1.00

530.00 1800.00

L.S. L.S. L.S. L.S. L.S.

53.82 53.82 53.82 39.00 53.82

1.49 1.49 1.49 1.49 1.49

Day Day Day

3.00 3.00 4.00

Add water charges @ 1% on

301.00 301.00 247.00 Total: 7342.87

Add C.P & OH @15% on

7416.30

Page 730 of 2298

Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 8528.75 Rs 8528.75

Item Code: 17.5.1 P/F white vitreous china flat back half stall urinal with white PVC automatic flushing cistern etc Single half stall with 5 lt PVC cistern

Code 7379 7359 1532 1891 9999 9999 9999 9999 0116 0123 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS Half stall urinals of white vitreous china with waste fittings 5 litre PVC automatic flushing cistern with fitting Standard size flush pipe with unions, spreaders and clamps all in C.P. brass 50 mm diameter standard urinal C.I. Trap with vent arm outlet grating other couplings in Red lead, white lead and gasket Cement, sand and grit etc. Painting of fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Rate

each

1.00

1440.00

each each

1.00 1.00

490.00 240.00

each

1.00

158.00

L.S. L.S. L.S. L.S.

17.55 26.91 26.00 40.43

1.49 1.49 1.49 1.49

Day Day Day

1.75 2.00 4.00

301.00 301.00 247.00 Total: 4609.98

Add water charges @ 1% on

Add C.P & OH @15% on 4656.08 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 5354.49 Rs 5354.50

Item Code: 17.5.2 P/F WVC flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one no. MATERIALS 7379 Two half stall urinals of white vitreous china with waste each 2.00 1440.00 fittings 7359 5 litre PVC automatic flushing cistern with fitting each 1.00 490.00 1533 Standard size flush pipe with unions, spreaders and clamps all each 1.00 380.00 in C.P. brass 1891 50 mm diameter standard urinal C.I. Trap with vent arm outlet each 1.00 158.00 grating other couplings in C 9999 Red lead, white lead and gasket L.S. 17.55 1.49 9999 Cement, sand and grit etc. L.S. 53.82 1.49 9999 Painting of fittings etc. L.S. 26.00 1.49 9999 Carriage of materials L.S. 53.82 1.49 LABOUR 0116 Fitter 1st class Day 2.50 301.00 0123 Mason 1st class Day 3.00 301.00 0114 Beldar Day 6.00 247.00 Total:

DSR-12

Page 731 of 2298

Add water charges @ 1% on

7270.77

Add C.P & OH @15% on 7343.48 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 8445.00 Rs 8445.00

Item Code: 17.5.3 P/F WVC flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern.

Code

7379 7361 1534 1893 9999 9999 9999 9999 0116 0123 0114

Description Details of cost for one no. MATERIALS Three half stall urinals of white vitreous china with waste fittings 10 litre PVC automatic flushing cistern with fitting Standard size flush pipe with unions, spreaders and clamps all in C.P. brass 80 mm diameter standard urinal C.I. Trap with vent arm outlet grating other couplings in C Red lead, white lead and gasket Cement, sand and grit etc. Painting of fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

3.00

1440.00

each each

1.00 1.00

530.00 490.00

each

1.00

200.00

L.S. L.S. L.S. L.S.

17.55 80.73 26.00 67.21

1.49 1.49 1.49 1.49

Day Day Day

3.00 3.50 7.00

301.00 301.00 247.00 Total: 9510.82

Add water charges @ 1% on

Add C.P & OH @15% on 9605.93 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 11046.82 Rs 11046.80

Item Code: 17.5.4 P/F WVC flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern.

Code

7379 7361 1535 1893 9999 9999 9999

DSR-12

Description Details of cost for one no. MATERIALS Four half stall urinals of white vitreous china with waste fittings 10 litre PVC automatic flushing cistern with fitting Standard size flush pipe with unions, spreaders and clamps all in C.P. brass 80 mm diameter standard urinal C.I. Trap with vent arm outlet grating other couplings in C Red lead, white lead and gasket Cement, sand and grit etc. Painting of fittings etc.

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

4.00

1440.00

each each

1.00 1.00

530.00 570.00

each

1.00

200.00

17.55 107.64 39.00

1.49 1.49 1.49

L.S. L.S. L.S.

Page 732 of 2298

9999 0116 0123 0114

Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

L.S.

80.73

1.49

Day Day Day

3.50 4.00 8.00

301.00 301.00 247.00 Total: 11658.43

Add water charges @ 1% on

Add C.P & OH @15% on 11775.01 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 13541.26 Rs 13541.25

Item Code: 17.6.1 P/F one piece white vitreous china squatting plate Single squatting plate with 5 lt PVC cistern Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1915 Squatting plate of white glazed vitreous china each 1.00 7359 5 litre PVC automatic flushing cistern with fitting each 1.00 1540 G.I. Flush pipe of standard size with spreaders fittings each 1.00 9999 Red lead, white lead and gasket L.S. 17.55 9999 Cement, sand and grit etc. L.S. 26.91 9999 Painting of fittings etc. L.S. 26.00 9999 Carriage of materials L.S. 26.91 LABOUR 0116 Fitter 1st class Day 1.75 0123 Mason 1st class Day 0.75 0114 Beldar Day 3.00 Add water charges @ 1% on

Rate 740.00 490.00 170.00 1.49 1.49 1.49 1.49 301.00 301.00 247.00 Total: 3038.59

Add C.P & OH @15% on 3068.98 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3529.33 Rs 3529.35

Item Code: 17.6.2 P/F one piece white vitreous china squatting plate Range of 2 squatting plates with 5 lt PVC cistern Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1915 Squatting plate of white glazed vitreous china each 2.00 7359 5 litre PVC automatic flushing cistern with fitting each 1.00 1541 G.I. Flush pipe of standard size with spreaders fittings each 1.00 9999 Red lead, white lead and gasket L.S. 17.55 9999 Cement, sand and grit etc. L.S. 53.82 9999 Painting of fittings etc. L.S. 26.00 9999 Carriage of materials L.S. 33.15 LABOUR 0116 Fitter 1st class Day 2.50 0123 Mason 1st class Day 1.00 0114 Beldar Day 4.00 Add water charges @ 1% on

DSR-12

Rate 740.00 490.00 230.00 1.49 1.49 1.49 1.49 301.00 301.00 247.00 Total: 4435.97

Page 733 of 2298

Add C.P & OH @15% on 4480.33 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 5152.38 Rs 5152.40

Item Code: 17.6.3 P/F one piece white vitreous china squatting plate Range of 3 squatting plates with 10 lt PVC cistern Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1915 Vitreous china squatting plate urinal each 3.00 7361 P.V.C. automatic flushing cistern 10 lts capacity each 1.00 1542 Flush pipe and spreaders G.I.for range of three squatting each 1.00 plates urinal 9999 Red lead, white lead and gasket L.S. 17.55 9999 Cement, sand and grit etc L.S. 80.73 9999 Painting of fittings L.S. 26.00 9999 Carriage of materilas L.S. 42.12 LABOUR: 0116 Fitter (grade 1) Day 3.00 0123 Mason (brick layer) 1st class Day 1.50 0114 Beldar Day 5.00 Add water charges @ 1% on

Rate 740.00 530.00 290.00 1.49 1.49 1.49 1.49 301.00 301.00 247.00 Total: 5877.44

Add C.P & OH @15% on 5936.21 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6826.64 Rs 6826.65

Item Code: 17.6.4 P/F one piece white vitreous china squatting plate Range of 4 squatting plate with 10 lt PVC cistern Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1915 Vitreous china squatting plate urinal each 4.00 1543 Flush pipe and spreaders G.I.for range of four squatting plates each 1.00 urinal 7361 P.V.C. automatic flushing cistern 10 lts capacity each 1.00 9999 Red lead, white lead and gasket L.S. 17.55 9999 Cement , sand and grit L.S. 107.64 9999 Painting of fittings L.S. 26.00 9999 Carriage of materials L.S. 69.03 LABOUR: 0116 Fitter (grade 1) Day 3.50 0123 Mason (brick layer) 1st class Day 1.75 0114 Beldar Day 5.50 Add water charges @ 1% on

Rate 740.00 365.00 530.00 1.49 1.49 1.49 1.49 301.00 301.00 247.00 Total: 7121.87

Add C.P & OH @15% on 7193.09 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 8272.05 Rs 8272.05

Page 734 of 2298

Item Code: 17.7.1 P/F wash basin with all fittings White vitreous china Wash basin 630x450mm with a pair of 15mm CP brass pillar taps

Code

1947 1885 1951 1309 9999 9999 9999 9999 0116 0123 0114

Description Details of cost for one no. MATERIALS 630x450 mm flat back wash basin of white vitreous china 15 mm C.P. brass piller taps 32 mm diameter C.P. brass waste of standard pattern C.I./M.S. brackets Red lead, white lead and gasket Cement, sand and grit etc. Painting of brackets, fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

675.00

each each

2.00 1.00

170.00 55.00

pair L.S. L.S. L.S. L.S.

1.00 16.12 13.39 26.91 13.52

53.00 1.49 1.49 1.49 1.49

Day Day Day

0.33 0.33 0.67

301.00 301.00 247.00 Total: 1591.36

Add water charges @ 1% on

Add C.P & OH @15% on 1607.27 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1848.36 Rs 1848.35

Item Code: 17.7.2 P/F wash basin with C.I. brackets, 15 mm C.P. brass pillar taps... White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 1947 630X450mm flat back wash basin -WVC each 1.00 675.00 1885 CP brass pillar tap - 15mm each 1.00 170.00 1951 32mm dia CP brass waste each 1.00 55.00 1309 CI brackets pair 1.00 53.00 9999 Red lead, white lead and gasket L.S. 16.12 1.49 9999 Cement, sand and grit etc. L.S. 13.39 1.49 9999 Painting of brackets, fittings etc. L.S. 26.91 1.49 9999 Carriage of materials L.S. 13.52 1.49 LABOUR: 0116 Fitter grade-I Day 0.30 301.00 0123 Mason I class Day 0.33 301.00 0114 Beldar Day 0.63 247.00 Total: Add water charges @ 1% on 1402.45 Add C.P & OH @15% on 1416.47 Cost for 1.00 No.

DSR-12

Page 735 of 2298

Rate per Each: Rate as per DSR-12:

Rs 1628.94 Rs 1628.95

Item Code: 17.7.3 P/F wash basin with C.I. brackets, 15 mm C.P. brass pillar taps... White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 3229 550x400 mm flat back wash basin of white each 1.00 530.00 vitreous china 1885 15 mm C.P. brass piller taps each 2.00 170.00 1951 32 mm diameter C.P. brass waste of standard each 1.00 55.00 pattern 1309 C.I./M.S. brackets pair 1.00 53.00 9999 Red lead, white lead and gasket L.S. 16.12 1.49 9999 Cement, sand and grit etc. L.S. 13.39 1.49 9999 Painting of brackets, fittings etc. L.S. 26.91 1.49 9999 Carriage of materials L.S. 13.52 1.49 LABOUR 0116 Fitter 1st class Day 0.33 301.00 0123 Mason 1st class Day 0.33 301.00 0114 Beldar Day 0.67 247.00 Total: Add water charges @ 1% on 1446.36 Add C.P & OH @15% on 1460.82 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1679.94 Rs 1679.95

Item Code: 17.7.4 P/F wash basin with C.I. brackets, 15 mm C.P. brass pillar taps... White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 3229 White vitreous china wash basin - Flat back - 550x400mm each 1.00 530.00 1885 1951 1309 9999

CP brass pillar tap - 15mm 32mm dia CP brass waste CI brackets Red lead, white lead and gasket

9999 9999 9999

Cement, sand and grit etc. Painting of brackets, fittings etc. Carriage of materials

0116 0123 0114

LABOUR: Fitter grade-I Mason I class Beldar

each each pair

1.00 1.00 1.00

170.00 55.00 53.00

L.S. L.S. L.S.

16.12 13.39 26.91

1.49 1.49 1.49

L.S.

13.52

1.49

Day Day Day

0.30 0.33 0.63

301.00 301.00 247.00 Total: 1257.45

Add water charges @ 1% on

Add C.P & OH @15% on 1270.02 Cost for 1.00 No.

DSR-12

Page 736 of 2298

Rate per Each: Rate as per DSR-12:

Rs 1460.52 Rs 1460.50

Item Code: 17.7.5 P/F wash basin with all fittings White vitreous china angle back 600x480mm with single 15mm CP brass pillar tap

Code 1949 1885 1951 1309 9999 9999 9999 9999 0116 0123 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS 600x480 mm angle back wash basin of white vitreous china 15 mm C.P. brass piller taps 32 mm diameter C.P. brass waste of standard pattern C.I./M.S. brackets Red lead, white lead and gasket Cement, sand and grit etc. Painting of brackets, fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Rate

each

1.00

580.00

each each pair L.S. L.S. L.S. L.S.

1.00 1.00 1.00 16.12 13.39 26.91 13.52

170.00 55.00 53.00 1.49 1.49 1.49 1.49

Day Day Day

0.30 0.33 0.63

301.00 301.00 247.00 Total: 1307.45

Add water charges @ 1% on

Add C.P & OH @15% on 1320.52 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1518.60 Rs 1518.60

Item Code: 17.7.6 P/F wash basin with all fittings White vitreous china angle back 400x400mm with single 15mm CP brass pillar tap

Code 1950 1885 1951 1309 9999 9999 9999 9999 0116 0123 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS 400x400 mm angle back wash basin of white vitreous china 15 mm C.P. brass piller taps 32 mm diameter C.P. brass waste of standard pattern C.I./M.S. brackets Red lead, white lead and gasket Cement, sand and grit etc. Painting of brackets, fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Rate

each

1.00

405.00

each each pair L.S. L.S. L.S. L.S.

1.00 1.00 1.00 16.12 13.39 26.91 13.52

170.00 55.00 53.00 1.49 1.49 1.49 1.49

Day Day Day

0.30 0.33 0.63

301.00 301.00 247.00 Total: 1132.45

Add water charges @ 1% on

Add C.P & OH @15% on 1143.77 Cost for 1.00 No. Rate per Each:

DSR-12

Rs 1315.34

Page 737 of 2298

Rate as per DSR-12:

Rs 1315.35

Item Code: 17.7.7 P/F wash basin with all fittings White vitreous china Flat back wash basin 450x300mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 7004 450x300 mm angle back wash basin of white vitreous china each 1.00

425.00

1885 1951 1309 9999 9999 9999 9999 0116 0123 0114

15 mm C.P. brass piller taps 32 mm diameter C.P. brass waste of standard pattern C.I./M.S. brackets Red lead, white lead and gasket Cement, sand and grit etc. Painting of brackets, fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Rate

each each pair L.S. L.S. L.S. L.S.

1.00 1.00 1.00 16.12 13.39 26.91 13.52

170.00 55.00 53.00 1.49 1.49 1.49 1.49

Day Day Day

0.30 0.33 0.63

301.00 301.00 247.00 Total: 1152.45

Add water charges @ 1% on

Add C.P & OH @15% on 1163.97 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1338.57 Rs 1338.55

Item Code: 17.7.8 P/F wash basin with all fittings White vitreous china Surgeon type wash basin of 660x460mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3213 660x460 mm Surgeon type wash basin of white vitreous china each 1.00

995.00

7363 1951 1309 9999 9999 9999 9999 0116 0123 0114

15 mm C.P. brass piller taps (elbow operated lever) 32 mm diameter C.P. brass waste of standard pattern C.I./M.S. brackets Red lead, white lead and gasket Cement, sand and grit etc. Painting of brackets, fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Rate

each each pair L.S. L.S. L.S. L.S.

2.00 1.00 1.00 16.12 13.39 26.91 13.52

600.00 55.00 53.00 1.49 1.49 1.49 1.49

Day Day Day

0.33 0.33 0.67

301.00 301.00 247.00 Total: 2771.36

Add water charges @ 1% on

Add C.P & OH @15% on 2799.07 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3218.93 Rs 3218.95

Item Code: 17.7.9

DSR-12

Page 738 of 2298

P/F wash basin with all fittings White vitreous china Surgeon type wash basin of 660x460mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3213 660x460 mm Surgeon type wash basin of white vitreous china each 1.00

995.00

7363 1951 1309 9999 9999 9999 9999 0116 0123 0114

15 mm C.P. brass piller taps (elbow operated lever) 32 mm diameter C.P. brass waste of standard pattern C.I./M.S. brackets Red lead, white lead and gasket Cement, sand and grit etc. Painting of brackets, fittings etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Rate

each each pair L.S. L.S. L.S. L.S.

1.00 1.00 1.00 16.12 13.39 26.91 13.52

600.00 55.00 53.00 1.49 1.49 1.49 1.49

Day Day Day

0.30 0.33 0.63

301.00 301.00 247.00 Total: 2152.45

Add water charges @ 1% on

Add C.P & OH @15% on 2173.97 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2500.07 Rs 2500.05

Item Code: 17.7.10 P/F wash basin with all fittings SS round basin 405x355mm with single 15 mm CP brass pillar tap Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 7806 Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X each 1.00 355mm 1885 15 mm C.P. brass piller taps each 1.00 1951 32 mm diameter C.P. brass waste of standard pattern each 1.00 1309 C.I./M.S. brackets pair 1.00 9999 Red lead, white lead and gasket L.S. 16.12 9999 Cement, sand and grit etc. L.S. 13.39 9999 Painting of brackets, fittings etc. L.S. 26.91 9999 Carriage of materials L.S. 13.52 LABOUR 0116 Fitter 1st class Day 0.30 0123 Mason 1st class Day 0.33 0114 Beldar Day 0.63 Add water charges @ 1% on

Rate 1690.00 170.00 55.00 53.00 1.49 1.49 1.49 1.49 301.00 301.00 247.00 Total: 2417.45

Add C.P & OH @15% on 2441.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2807.86 Rs 2807.85

Item Code: 17.7.11 P/F wash basin with all fittings SS wash basin 530x345 mm with single 15 mm CP brass pillar tap Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS

DSR-12

Rate

Page 739 of 2298

7807 1885 1951 1309 9999 9999 9999 9999 0116 0123 0114

Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X each 345mm 15 mm C.P. brass piller taps each 32 mm diameter C.P. brass waste of standard pattern each C.I./M.S. brackets pair Red lead, white lead and gasket L.S. Cement, sand and grit etc. L.S. Painting of brackets, fittings etc. L.S. Carriage of materials L.S. LABOUR Fitter 1st class Day Mason 1st class Day Beldar Day

1.00

1470.00

1.00 1.00 1.00 16.12 13.39 26.91 13.52

170.00 55.00 53.00 1.49 1.49 1.49 1.49

0.30 0.33 0.63

301.00 301.00 247.00 Total: 2197.45

Add water charges @ 1% on

Add C.P & OH @15% on 2219.42 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2552.33 Rs 2552.35

Item Code: 17.8 P/F white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Code

Description

1396 9999

MATERIALS: White vitreous china pededstal for wash basin White cement mortar

9999

Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

650.00

L.S.

40.30

1.49

L.S.

40.43

1.49 Total: 770.29

Add water charges @ 1% on

Add C.P & OH @15% on 777.99 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 894.69 Rs 894.70

Item Code: 17.9.1 P/F kitchen sink with C.I. brackets, White glazed fire clay kit.sink of size 600x450x250 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1863 White glazed fire clay kitchen sink of size each 1.00 600x450x250 mm 1309 C.I. Bracket pair 1.00 1315 C.P. brass chain with 40 mm rubber plug each 1.00 1952 40 mm C.P. brass waste each 1.00 9999 Red lead, white lead and gasket L.S. 16.12 9999 Cement, sand and grit etc. L.S. 13.39 9999 Painting brackets etc. L.S. 26.91 9999 Carriage of materials L.S. 13.52 LABOUR 0116 Fitter 1st class Day 0.22

DSR-12

Rate 1350.00 53.00 27.00 62.00 1.49 1.49 1.49 1.49 301.00

Page 740 of 2298

0123 0114

Mason 1st class Beldar

Day Day

0.33 0.56

Add water charges @ 1% on

301.00 247.00 Total: 1900.08

Add C.P & OH @15% on 1919.08 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2206.94 Rs 2206.95

Item Code: 17.10.1.1 P/F kitchen sink with C.I. brackets, Kitchen sink with drain board 510x1040 mm bowl depth 250mm. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7095 Stainles steel kitchen sink - with drain board bowl depth 250mm each 1.00 1309 CI brackets pair 2.00 9999 Cement, sand and grit etc. L.S. 27.04 9999 Painting brackets etc. L.S. 26.91 9999 Carriage of materials L.S. 13.52 LABOUR: 0116 Fitter grade-I Day 0.22 0123 Mason I class Day 0.60 0114 Beldar Day 0.82 Add water charges @ 1% on

Rate

5150.00 53.00 1.49 1.49 1.49 301.00 301.00 247.00 Total: 5805.89

Add C.P & OH @15% on 5863.95 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6743.54 Rs 6743.55

Item Code: 17.10.1.2 P/F Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets Kitchen sink with drain board 510x1040 mm bowl depth 225mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7096 Stainles steel kitchen sink - with drain board 510x1040 bowl depth 225 mm each 1.00 4900.00 1309 CI brackets pair 2.00 53.00 9999 Cement, sand and grit etc. L.S. 27.04 1.49 9999 Painting brackets L.S. 26.91 1.49 9999 Carriage of materials L.S. 13.52 1.49 LABOUR: 0116 Fitter grade-I Day 0.22 301.00 0123 Mason I class Day 0.60 301.00

DSR-12

Page 741 of 2298

0114

Beldar

Day

0.82

Add water charges @ 1% on

247.00 Total: 5555.89

Add C.P & OH @15% on 5611.45 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6453.17 Rs 6453.15

Item Code: 17.10.1.3 P/F stainless steel kitchen sink with fittings with drain board 510x1040 bowl depth 200mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 7097 Stainlees steel kitchen sink - with drain board 510 x 1040mm each 1.00 bowl depth 200 mm. 1309 C.I. Brackets pair 2.00 9999 Cement, sand and grit etc. L.S. 27.04 9999 Painting brackets L.S. 26.91 9999 Carriage of materials L.S. 13.52 LABOUR 0116 Fitter 1st class Day 0.22 0123 Mason 1st class Day 0.60 0114 Beldar Day 0.82 Add water charges @ 1% on

Rate 4200.00 53.00 1.49 1.49 1.49 301.00 301.00 247.00 Total: 4855.89

Add C.P & OH @15% on 4904.45 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 5640.12 Rs 5640.10

Item Code: 17.10.1.4 P/F stainless steel kitchen sink with fittings with drain board 400x915 bowl depth 178mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 7098 Stainless steel kitchen sink - with drain board 510xl040mm each 1.00 bowl depth 178 mm 1309 C.I. Brackets pair 2.00 9999 Cement, sand and grit etc. L.S. 27.04 9999 Painting brackets L.S. 26.91 9999 Carriage of materials L.S. 13.52 LABOUR 0116 Fitter 1st class Day 0.22 0123 Mason 1st class Day 0.60 0114 Beldar Day 0.82 Add water charges @ 1% on

Rate 2900.00 53.00 1.49 1.49 1.49 301.00 301.00 247.00 Total: 3555.89

Add C.P & OH @15% on 3591.45 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 4130.17 Rs 4130.15

Page 742 of 2298

Item Code: 17.10.2.1 P/F Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets Kitchen sink without drain board 610x510 mm bowl depth 200 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7101 Stainless steel kitchen sink-without drain board 610x510 bowl depth 200 mm each 1.00 2950.00 1309 CI brackets pair 1.00 53.00 9999 Cement, sand and grit etc. L.S. 13.52 1.49 9999 Painting brackets L.S. 26.91 1.49 9999 Carriage of materials L.S. 13.52 1.49 0116 Fitter grade-I Day 0.22 301.00 LABOUR: 0123 Mason I class Day 0.33 301.00 0114 Beldar Day 0.56 247.00 Total: Add water charges @ 1% on 3387.25 Add C.P & OH @15% on 3421.12 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3934.29 Rs 3934.30

Item Code: 17.10.2.2 P/F Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets Kitchen sink without drain board 610x460 mm bowl depth 200 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 7102 Stainless steel kitchen sink - without drain board 610x460mm each 1.00 2750.00 bowl depth 178 mm 1309 C.I. Brackets pair 1.00 53.00 9999 Cement, sand and grit etc. L.S. 13.52 1.49 9999 Painting brackets L.S. 26.91 1.49 9999 Carriage of materials L.S. 13.52 1.49 LABOUR 0116 Fitter 1st class Day 0.22 301.00 0123 Mason 1st class Day 0.33 301.00 0114 Beldar Day 0.56 247.00 Total: Add water charges @ 1% on 3187.25 Add C.P & OH @15% on 3219.12 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3701.99 Rs 3702.00

Item Code: 17.10.2.3 P/F stainless steel kitchen sink with fittings Without drain board : 470X420 BOWL DEPTH 178MM Details of Cost for : 1.00 No.

DSR-12

Page 743 of 2298

Code 7103 1309 9999 9999 9999

0116 0123 0114

Description Unit MATERIALS: Stainless steel kitchen sink - without drain board 470x420mm each bowl depth 178mm C.I. brackets pair Cement, sand and grit etc. L.S. Painting brackets L.S. Carriage of materials L.S. LABOUR : Fitter (grade 1) Day Mason (brick layer) 1st class Day Beldar Day

Quantity

Rate

1.00

2050.00

1.00

53.00

13.52

1.49

26.91

1.49

13.52

1.49

0.22 0.33 0.56

301.00 301.00 247.00 Total: 2487.25

Add water charges @ 1% on

Add C.P & OH @15% on 2512.12 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2888.94 Rs 2888.95

Item Code: 17.11.1 P/F white vitreous china laboratory sink : 450 x 300 x 150 mm. Code 1871 1309 1315 1952 1895 3617 9999 9999 9999 9999 0116 0123 0114

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS White vitreous china laboratory sink of size 450x300x150 mm each C.I. bracket for wash basin and sinks C.P. brass chain with 40 mm rubber plug C.P. brass waste 40 mm 40 mm C.P. brass trap 40 mm C.P. brass union Red lead, white lead and gaskit Cement, sand and grit etc. Sundries Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Rate

1.00

820.00

pair each each each each L.S. L.S. L.S. L.S.

1.00 1.00 1.00 1.00 1.00 16.12 13.39 26.91 13.52

53.00 27.00 62.00 125.00 175.00 1.49 1.49 1.49 1.49

Day Day Day

0.22 0.33 0.56

301.00 301.00 247.00 Total: 1670.08

Add water charges @ 1% on

Add C.P & OH @15% on 1686.78 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1939.80 Rs 1939.80

Item Code: 17.11.2 P/F WVC laboratory sink with C.I. brackets,.. Size 600x450x200mm Code

Description

Details of Cost for : 1.00 No. Unit Quantity

Rate

Details of cost for one no

DSR-12

Page 744 of 2298

1872 1309 1315 1952 1895 3617 9999 9999 9999 9999 0116 0123 0114

MATERIALS White vitreous china laboratory sink of size 600x450x200 mm each C.I. bracket for wash basin and sinks C.P. brass chain with 40 mm rubber plug C.P. brass waste 40 mm 40mm C.P. brass trap C.P. brass union, 40mm dia Red lead, white lead and gaskit Cement, sand and grit etc. Sundries Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

1.00

1525.00

pair each each each each L.S. L.S. L.S. L.S.

1.00 1.00 1.00 1.00 1.00 16.12 13.39 26.91 13.52

53.00 27.00 62.00 125.00 175.00 1.49 1.49 1.49 1.49

Day Day Day

0.22 0.33 0.56

301.00 301.00 247.00 Total: 2375.08

Add water charges @ 1% on

Add C.P & OH @15% on 2398.83 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2758.65 Rs 2758.65

Item Code: 17.12.1 P/F draining board with CI brackets White glazed fire clay drai- ning board 600x450x25mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 7364 White glazed fire clay draining board of size 600x450x25 mm each 1.00 1309 9999 9999 9999 0116 0123 0114

C.I./M.S. Brackets Cement, sand and grit etc. Painting brackets etc. Carriage of materials LABOUR Fitter 1st class Mason 1st class Beldar

Rate 525.00

pair L.S. L.S. L.S.

1.00 13.39 26.00 7.80

53.00 1.49 1.49 1.49

Day Day Day

0.06 0.17 0.22

301.00 301.00 247.00 Total: 771.88

Add water charges @ 1% on

Add C.P & OH @15% on 779.60 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 896.54 Rs 896.55

Item Code: 17.13.1 P/F WVC W.C.squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1953 WVC long pattern WC pan each 1.00 9999 Cement, sand and grit etc. L.S. 13.39 9999 Carriage of materials

DSR-12

Rate 340.00 1.49

Page 745 of 2298

0123 0114

LABOUR: Mason I class Beldar

L.S.

13.52

1.49

Day Day

0.50 0.50

301.00 247.00 Total: 654.09

Add water charges @ 1% on

Add C.P & OH @15% on 660.63 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 759.72 Rs 759.70

Item Code: 17.13.2 P/F WVC W.C.squatting pan (Indian type) Long pattern Orissa pattern W.C. pan of size 580x440 mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1954 Vitreous china orrisa type w.c. pan size 580 mm each 1.00 9999 Cement, sand and grit etc. L.S. 13.39 9999 Carriage of materials L.S. 13.52 LABOUR: 0123 Mason I class Day 0.50 0114 Beldar Day 0.50 Add water charges @ 1% on

Rate 750.00 1.49 1.49 301.00 247.00 Total: 1064.09

Add C.P & OH @15% on 1074.73 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1235.94 Rs 1235.95

Item Code: 17.14.1 Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Details of Cost for : 1.00 No. Code Description Unit Quantity 7104 Coloured Orissa pattern W.C. pan 580x440 mm each 1.00 1954 WVC Orissa pattern WC pan - 580x440mm each -1.00 Add water charges @ 1% on

Rate 1275.00 750.00 Total: 525.00

Add C.P & OH @15% on 530.25 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 609.79 Rs 609.80

Item Code: 17.15 P/F WVC W.C.pedestal type (European type/ wash down type) water closet pan. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1955 White glazed pedastal type W.C pan each 1.00

DSR-12

Rate 680.00

Page 746 of 2298

9999

Cement, sand and grit etc.

9999

Carriage of materials

0123 0114

LABOUR: Mason I class Beldar

L.S.

13.39

1.49

L.S.

13.52

1.49

Day Day

0.50 0.50

301.00 247.00 Total: 994.09

Add water charges @ 1% on

Add C.P & OH @15% on 1004.03 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1154.63 Rs 1154.65

Item Code: 17.16 Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 7105 Coloured (European type) W.C. pan each 1.00 1080.00 1955 White (European type) W.C. pan each -1.00 680.00 7106 Coloured low level cistern each 1.00 1500.00 7005 White vitreous china low level flushing cistern each -1.00 890.00 Total: Add water charges @ 1% on 1010.00 Add C.P & OH @15% on 1020.10 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1173.12 Rs 1173.10

Item Code: 17.17.1 P/F a pair of WVC foot rests of standard pattern for squatting panW.C. 250x130x30 mm Details of Cost for : 1.00 pairs Code Description Unit Quantity MATERIALS: 1363 Vitreous china foot rests 250x130x30 mm pair 1.00 9999 Cement, sand including carriage of materials L.S. 8.06 LABOUR: 0123 Mason I class Day 0.06 Add water charges @ 1% on

Rate

90.00 1.49 301.00 Total: 120.07

Add C.P & OH @15% on 121.27 Cost for 1.00 pairs Rate per Each Pair: Rate as per DSR-12:

Rs 139.46 Rs 139.45

Item Code: 17.17.2 P/F a pair of WVC foot rests of standard pattern for squatting panW.C. 250x125x25 mm

DSR-12

Page 747 of 2298

Code

Description

1970

MATERIALS: Vitreous china foot rests 250x125x30 mm

9999

Cement, sand including carriage of materials

0123

LABOUR: Mason I class

Details of Cost for : 1.00 pairs Unit Quantity

Rate

pair

1.00

100.00

L.S.

8.06

1.49

Day

0.06

301.00 Total: 130.07

Add water charges @ 1% on

Add C.P & OH @15% on 131.37 Cost for 1.00 pairs Rate per Each Pair: Rate as per DSR-12:

Rs 151.08 Rs 151.10

Item Code: 17.18.1 P/F P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7358 10 ltr low level PVC flushing cistern with accessories and flush each 1.00 640.00 pipe. 9999 Carriage of materials L.S. 5.20 1.49 LABOUR: 0116 Fitter grade-I Day 0.125 301.00 0114 Beldar Day 0.125 247.00 Total: Add water charges @ 1% on 716.26 Add C.P & OH @15% on 723.42 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 831.93 Rs 831.90

Item Code: 17.18.2 P/F P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - col Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 7123 Controlled flush cistern with accessories each 1.00 685.00 9999 Carriage of materials L.S. 7.02 1.49 LABOUR (Considering 1 fitter and 1 beldar can fix 8 cistern in one day) 0116 0114

Fitter 1 st class Beldar

Day Day

0.125 0.125

Add water charges @ 1% on

301.00 247.00 Total: 763.97

Add C.P & OH @15% on 771.61 Cost for 1.00 No.

DSR-12

Page 748 of 2298

Rate per Each: Rate as per DSR-12:

Rs 887.35 Rs 887.35

Item Code: 17.19.1 P/F controlled flush,low level cistern made of vitreous china with all fittings 10 lt (full flush) capacity - white

Code 7126 9999 0116 0114

Description MATERIALS Controlled flush cistern with accessories Carriage of materials LABOUR Fitter 1st class Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 13.52

975.00 1.49

Day Day

0.50 0.50

301.00 247.00 Total: 1269.14

Add water charges @ 1% on

Add C.P & OH @15% on 1281.83 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1474.10 Rs 1474.10

Item Code: 17.19.2 P/F controlled flush,low level cistern made of vitreous china with all fittings 10 lt (full flush) capacity - coloured

Code 7127 9999 0116 0114

Description MATERIALS Controlled flush cistern with accessories Carriage of materials LABOUR Fitter 1 st class Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 13.52

1400.00 1.49

Day Day

0.50 0.50

301.00 247.00 Total: 1694.14

Add water charges @ 1% on

Add C.P & OH @15% on 1711.08 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1967.74 Rs 1967.75

Item Code: 17.20.1 P/F solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1875 White solid plastic seat and lid with CP B hinges & rubber each 1.00 buffer 9999 Carriage of materials and fixing charges L.S. 13.39

DSR-12

Rate 310.00

Add water charges @ 1% on

1.49 Total: 329.95

Add C.P & OH @15% on

333.25

Page 749 of 2298

Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 383.24 Rs 383.25

Item Code: 17.20.2 P/F solid plastic seat with lid for pedestal type W.C. pan complete : Black solid plastic seat with lid Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1876 Black plastic seat (solid) with lid C.P.brass hinges and rubber each 1.00 buffers 9999 Carriage of materials and fixing charges L.S. 13.39 Add water charges @ 1% on

Rate 293.00

1.49 Total: 312.95

Add C.P & OH @15% on 316.08 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 363.49 Rs 363.50

Item Code: 17.20.3 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete - Coloured (other than black & white) solid plastic seat with lid Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7107 Coloured (other than black) solid P.V.C. seat in European W.C. each 1.00 475.00 pan 9999 Carriage and fixing charges L.S. 13.39 1.49 Total: Add water charges @ 1% on 494.95 Add C.P & OH @15% on 499.90 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 574.89 Rs 574.90

Item Code: 17.22 P/F GI inlet connection for flush pipe Code 1614 9999

Description MATERIALS G.I. Inlet connection Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 13.39

Add water charges @ 1% on

Rate 61.00 1.49 Total: 80.95

Add C.P & OH @15% on 81.76 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 94.02 Rs 94.00

Page 750 of 2298

Item Code: 17.23 P/F WVC flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively.

Code 1913 9999

0116 0114

Details of Cost for : 1.00 No. Unit Quantity

Description

MATERIALS: WVC urinal basin - Flat back (430x260x350mm) / Angular each (340x410x265 mm) Carriage of materials L.S. LABOUR: Fitter grade-I Day Beldar Day

Rate

1.00

460.00

9.49

1.49

0.38 0.38

301.00 247.00 Total: 682.38

Add water charges @ 1% on

Add C.P & OH @15% on 689.20 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 792.58 Rs 792.60

Item Code: 17.24 P/F white vitreous china squatting plate urinal. Code 1915 9999 9999 0116 0123 0114

Details of Cost for : 1.00 No. Unit Quantity

Description

MATERIALS Squatting plate urinal of white vitreous china with integral each longitudinal flush pipe Cement, sand and grit etc. L.S. Carriage of materials L.S. LABOUR Fitter 1st class Day Mason 1st class Day Beldar Day

Rate

1.00

740.00

10.79 13.39

1.49 1.49

0.50 0.50 1.00

301.00 301.00 247.00 Total: 1324.03

Add water charges @ 1% on

Add C.P & OH @15% on 1337.27 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1537.86 Rs 1537.85

Item Code: 17.25.1 P/F WVC wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm.

Code 1947 9999 9999

DSR-12

Description MATERIALS White vitreous china flat back wash basin 630x450 mm Fixing charges Carriage of materials

Details of Cost for : 1.00 No. Unit Quantity each L.S. L.S.

1.00 53.82 9.49

Rate

Add water charges @ 1% on

675.00 1.49 1.49 Total: 769.33

Add C.P & OH @15% on

777.02

Page 751 of 2298

Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 893.57 Rs 893.55

Item Code: 17.25.2 P/fF WVC wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400mm.

Code 3229 9999 9999

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS White vitreous china flat back wash basin 550x400 mm Fixing charges Carriage of materials

each L.S. L.S.

1.00 53.82 9.49

Add water charges @ 1% on

Rate 530.00 1.49 1.49 Total: 624.33

Add C.P & OH @15% on 630.57 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 725.16 Rs 725.15

Item Code: 17.25.3 P/F white vitreous china wash basin : Angle back wash basin 600 x 480 mm. Code

Details of Cost for : 1.00 No. Unit Quantity

Description

1949

MATERIALS White vitreous china angle flat back wash basin 600x480 mm each

9999 9999

Fixing charges Carriage of materials

L.S. L.S.

Rate

1.00

580.00

53.82 9.49

1.49 1.49 Total: 674.33

Add water charges @ 1% on

Add C.P & OH @15% on 681.07 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 783.23 Rs 783.25

Item Code: 17.25.4 P/F white vitreous china wash basin : Angle back wash basin 400 x 400 mm. Code

Description

Details of Cost for : 1.00 No. Unit Quantity

1950

MATERIALS White vitreous china angle flat back wash basin 400x400 mm each

9999 9999

Fixing charges Carriage of materials

L.S. L.S.

Rate

1.00

405.00

53.82 9.49

1.49 1.49 Total: 499.33

Add water charges @ 1% on

Add C.P & OH @15% on 504.32 Cost for 1.00 No. Rate per Each:

DSR-12

Rs 579.97

Page 752 of 2298

Rate as per DSR-12:

Rs 579.95

Item Code: 17.25.5 P/F white vitreous china wash basin : Flat back wash basin 450 x 300 mm. Code 7004 9999 9999

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS White vitreous china flat back wash basin 450x300 mm Fixing charges Carriage of materials

each L.S. L.S.

1.00 53.82 9.49

Add water charges @ 1% on

Rate 425.00 1.49 1.49 Total: 519.33

Add C.P & OH @15% on 524.52 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 603.20 Rs 603.20

Item Code: 17.25.6 P/F white vitreous china wash basin : Surgeon type wash basin 660 x 460 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one no. MATERIALS 3213 White vitreous china surgeon type back wash each 1.00 basin 660x460 mm 9999 Fixing charges L.S. 53.82 9999 Carriage of materials L.S. 9.49 Add water charges @ 1% on

Rate

995.00 1.49 1.49 Total: 1089.33

Add C.P & OH @15% on 1100.22 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1265.25 Rs 1265.25

Item Code: 17.26.1 P/fF WVC wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400mm.

Code

Description

1863 9999

MATERIALS: White glazed fire clay sink of size 600x450x250 mm Fixing charges

9999

Carriage of materials

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

1350.00

L.S. L.S.

40.43 10.79

1.49 1.49 Total: 1426.32

Add water charges @ 1% on

Add C.P & OH @15% on 1440.58 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 1656.67 Rs 1656.65

Page 753 of 2298

Item Code: 17.27.1 P/fF WVCchina laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm.

Code

Details of Cost for : 1.00 No. Unit Quantity

Description

1871

MATERIALS: White vitreous china laboratry sink: 450x300x150 mm

9999

Fixing charges

9999

Carriage of materials

Rate

each

1.00

820.00

L.S.

40.43

1.49

L.S.

10.79

1.49 Total: 896.32

Add water charges @ 1% on

Add C.P & OH @15% on 905.28 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1041.07 Rs 1041.05

Item Code: 17.27.2 P/fF WVCchina laboratory sink excluding cost of fittings: Size 600x450x200 mm. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1872 White vitreous china laboratory sink600x450x200 mm each 1.00 9999 Fixing charges L.S. 40.43 9999 Carriage of materials L.S. 10.79 Add water charges @ 1% on

Rate 1525.00 1.49 1.49 Total: 1601.32

Add C.P & OH @15% on 1617.33 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1859.93 Rs 1859.95

Item Code: 17.28.1.1 P/F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Code 7117 9999

Description MATERIALS Semi rigid P.V.C. waste pipe with waste fittings Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 20.28

Add water charges @ 1% on

Rate 21.00 1.49 Total: 51.22

Add C.P & OH @15% on 51.73 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 59.49 Rs 59.50

Page 754 of 2298

Item Code: 17.28.1.2 P/F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia

Code 7118 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS: Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia each with Carriage of materials L.S.

Rate

1.00

27.00

20.28

1.49 Total: 57.22

Add water charges @ 1% on

Add C.P & OH @15% on 57.79 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 66.46 Rs 66.45

Item Code: 17.28.2.1 P/F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Code 7119 9999

Description MATERIALS Flexible pipe (coil type) with waste fittings Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 20.28

Add water charges @ 1% on

Rate 26.00 1.49 Total: 56.22

Add C.P & OH @15% on 56.78 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 65.30 Rs 65.30

Item Code: 17.28.2.2 P/F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Code 7120 9999

Description MATERIALS Flexible pipe (coil type) with waste fittings Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 20.28

Add water charges @ 1% on

Rate 28.00 1.49 Total: 58.22

Add C.P & OH @15% on 58.80 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 67.62 Rs 67.60

Item Code: 17.29 P/F 100 mm SCI grating for gully, floor or Nahani trap Details of Cost for : 1.00 No.

DSR-12

Page 755 of 2298

Code 1369 9999

Description MATERIALS 100 mm S.C.I. Grating for gully or Nahani trap Carriage of materials and fixing charges

Unit

Quantity

Rate

each L.S.

1.00 4.16

15.00 1.49 Total: 21.20

Add water charges @ 1% on

Add C.P & OH @15% on 21.41 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 24.62 Rs 24.60

Item Code: 17.30 P/F 25 mm dia mosquito proof coupling Code

Details of Cost for : 1.00 No. Unit Quantity

Description

Rate

1350

MATERIALS Mosquito proof coupling of the approved municipal design

each

1.00

27.00

9999

Carriage of materials and fixing charges

L.S.

1.82

1.49 Total: 29.71

Add water charges @ 1% on

Add C.P & OH @15% on 30.01 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 34.51 Rs 34.50

Item Code: 17.31 P/F 600x450 mm beveled edge mirror of superior glass .. with C.P. brass screws and washers complete. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1392 Mirror of superior make glass each 1.00 7116 600x450 mm 6 mm thick hard board sqm 0.27 (A) Wooden cleats 09.032 Providing 50x50x50mm 2nd class teak wood plugs fixing in 4.00 CM 1:3 Wood work) 0588 25 mm C.P.brass screw, and washers 100 N 4.00 9999 Carriage of materials L.S. 4.16 9999 Sundries L.S. 1.43 LABOUR 0112 Carpenter II class Day 0.33 0114 Beldar Day 0.33 Add water charges @ 1% except on [A] i.e on

Rate 290.00 170.00 17.42

115.00 1.49 1.49 273.00 247.00 Total: 520.43

Add C.P & OH @15% except on [A] i.e on 525.63 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 674.15 Rs 674.05

Item Code: 17.32.1

DSR-12

Page 756 of 2298

P/F mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450mm dia.

Code 7112

7116 7048 0588 9999 9999 0112 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS Mirror 450 mm dia with plastic moulded frame Hard board 0.45x0.45 = 0.2025 sqm Add wastage @ 10% = 0.0203 sqm = 0.2228 sqm say 0.22sqm Raw plug 40 to 50 mm C.P. bras screws and washers Sundries Carriage of materials LABOUR Carpenter II class Beldar

Rate

each

1.00

390.00

sqm each 100 N L.S. L.S.

0.22 2.00 2.00 1.43 4.16

170.00 10.00 115.00 1.49 1.49

Day Day

0.33 0.33

273.00 247.00 Total: 629.63

Add water charges @ 1% on

Add C.P & OH @15% on 635.93 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 731.32 Rs 731.30

Item Code: 17.32.2 P/F mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357

Code 7113

7116 7048 0588 9999 9999 0112 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS Mirror 453x357 mm dia with plastic moulded frame Hard board 0.453x0.357 = 0.1617 sqm Add wastage @ 10% = 0.0162 sqm = 0.1779 sqm say 0.18 sqm Raw plug 40 to 50 mm C.P. bras screws 25 mm and washers Sundries Carriage of materials LABOUR Carpenter II class Beldar

Rate

each

1.00

260.00

sqm each 100 N L.S. L.S.

0.18 4.00 4.00 1.43 4.16

170.00 10.00 115.00 1.49 1.49

Day Day

0.33 0.33

273.00 247.00 Total: 515.13

Add water charges @ 1% on

Add C.P & OH @15% on 520.28 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 598.32 Rs 598.30

Item Code: 17.32.3 P/F mirror of superior glass with plastic moulded frame: Oval 450 x 350 mm Code

Description

Details of Cost for : 1.00 No. Unit Quantity

Rate

MATERIALS

DSR-12

Page 757 of 2298

7114

7116 7048 0588 9999 9999 0112 0114

Oval shape mirror 450x350 mm (outer dimensions) Hard board 0.45x0.35=0.1575 sqm Add wastage @ 10% = 0.0158 sqm = 0.1733 sqm say 0.17 sqm Raw plug 40 to 50 mm C.P. bras screws 25 mm and washers Sundries Carriage of materials LABOUR Carpenter II class Beldar

each

1.00

300.00

sqm each 100 N L.S. L.S.

0.17 4.00 4.00 1.43 4.16

170.00 10.00 115.00 1.49 1.49

Day Day

0.33 0.33

273.00 247.00 Total: 553.43

Add water charges @ 1% on

Add C.P & OH @15% on 558.96 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 642.80 Rs 642.80

Item Code: 17.32.4 P/F mirror of superior glass ..of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Code

Description

7115 7116 7048 0588 9999 9999

MATERIALS: Mirror 1500x450 mm with plastic moulded frame 600x450mm 6mm thick hard board Rawl plug 40 to 50mm 25mm CP brass screws and washers Sundries Carriage of materials

0112 0114

LABOUR: Carpenter II class Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each sqm each 100 N L.S.

1.00 0.74 6.00 6.00 1.43

670.00 170.00 10.00 115.00 1.49

L.S.

4.16

1.49

Day Day

0.33 0.33

273.00 247.00 Total: 1042.63

Add water charges @ 1% on

Add C.P & OH @15% on 1053.06 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1211.02 Rs 1211.00

Item Code: 17.33 Code 3228 7048 0586 9999 0112 0114

DSR-12

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 600x120x5 mm glass shelf with anodised aluminium angle each frame C.P. brass brackets & guard Raw plugs each 40 mm C.P. brass screws 100 N Carriage of materials L.S. LABOUR Carpenter II class Day Beldar Day

Rate

1.00

130.00

2.00 4.00 4.16

10.00 190.00 1.49

0.25 0.25

273.00 247.00 Total:

Page 758 of 2298

Add water charges @ 1% on

293.80

Add C.P & OH @15% on 296.74 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 341.25 Rs 341.25

Item Code: 17.34.1 Providing and fixing toilet paper holder : C.P. brass Code 1889 09.032 0588 9999 0112 0114

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS C.P. brass toilet holder of standard size each (A) Wooden cleats Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3 25 mm C.P.brass screw 100 N Carriage of materials L.S. LABOUR Carpenter II class Day Beldar Day

Rate

1.00

115.00

2.00

17.42

2.00 4.29

115.00 1.49

0.12 0.12

273.00 247.00 Total: 186.09

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 187.95 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 250.98 Rs 250.95

Item Code: 17.34.2 Providing and fixing toilet paper holder : Vitreous china Code 3749 09.032 0588 9999 0112 0114

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS Vitreous china toilet holder of standard size each (A) Wooden cleats Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3 25 mm C.P.brass screw 100 N Carriage of materials L.S. LABOUR Carpenter II class Day Beldar Day

Rate

1.00

118.00

2.00

17.42

6.00 4.29

115.00 1.49

0.12 0.12

273.00 247.00 Total: 193.69

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 195.63 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 259.81 Rs 259.75

Item Code: 17.35.1.1 P/F soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. Details of Cost for : 17.37 m

DSR-12

Page 759 of 2298

Code 1617

Description MATERIALS: Sand cast iron pipe - 100mm dia - Single socket (1.80m long)

9999

Scaffolding

9999

Carriage of materials

0116 0100 0114

LABOUR: Fitter grade-I Bandhani Beldar

Unit

Quantity

Rate

each

10.50

990.00

L.S.

80.73

1.49

L.S.

53.82

1.49

Day Day Day

0.42 0.21 0.83

301.00 260.00 247.00 Total: 10981.51

Add water charges @ 1% on

Add C.P & OH @15% on 11091.33 Cost for 17.37 m Rate per One Metre: Rate as per DSR-12:

Rs 734.31 Rs 734.30

Item Code: 17.35.1.2 P/F soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron socketed pipe as per IS: 3989. Details of Cost for : 16.87 m Code Description Unit Quantity MATERIALS : 3620 100mm centrifugally cast (spun) iron S&S pipes (1.75m long) each 10.50 9999

Scaffolding

9999

Carriage of materials

0116 0100 0114

LABOUR: Fitter grade-I Bandhani Beldar

Rate 1130.00

L.S.

80.73

1.49

L.S.

53.82

1.49

Day Day Day

0.42 0.21 0.83

301.00 260.00 247.00 Total: 12451.51

Add water charges @ 1% on

Add C.P & OH @15% on 12576.03 Cost for 16.87 m Rate per One Metre: Rate as per DSR-12:

Rs 857.29 Rs 857.30

Item Code: 17.35.2.1 P/F soil, waste and vent pipes : 75 mm diameter : Sand cast iron S&S pipe as per IS: 1729. Details of Cost for : 17.42 m Code Description Unit Quantity MATERIALS: 1616 Sand Cast iron S&S pipe - single socket (1.80m long) each 10.50 9999 Scaffolding L.S. 80.73 9999 Carriage of materials L.S. 40.38 LABOUR: 0116 Fitter grade-I Day 0.35 0100 Bandhani Day 0.17

DSR-12

Rate 890.00 1.49 1.49 301.00 260.00

Page 760 of 2298

0114

Beldar

Day

0.70

247.00 Total: 9847.91

Add water charges @ 1% on

Add C.P & OH @15% on 9946.39 Cost for 17.42 m Rate per One Metre: Rate as per DSR-12:

Rs 656.62 Rs 656.60

Item Code: 17.35.2.2 P/F soil, waste and vent pipes : 75 mm diameter : Centrifugally cast (spun) iron socketed pipe as per IS: 3989.

Code

Description

3621 9999

MATERIALS: 75mm Centrifugally cast (spun) iron S&S pipe Scaffolding

9999

Carriage of materials

0116 0100 0114

LABOUR: Fitter grade-I Bandhani Beldar

Details of Cost for : 16.92 m Unit Quantity

Rate

each

10.50

985.00

L.S.

80.73

1.49

L.S.

40.38

1.49

Day Day Day

0.35 0.17 0.70

301.00 260.00 247.00 Total: 10845.41

Add water charges @ 1% on

Add C.P & OH @15% on 10953.86 Cost for 16.92 m Rate per One Metre: Rate as per DSR-12:

Rs 744.50 Rs 744.50

Item Code: 17.36.1 P/filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe

Code

Description

9999

MATERIALS: Cement mortar, spun yam etc.

0116 0114

LABOUR: Fitter grade-I Beldar

Details of Cost for : 4.00 Nos Unit Quantity

Rate

L.S.

6.89

1.49

Day Day

0.28 0.28

301.00 247.00 Total: 163.71

Add water charges @ 1% on

Add C.P & OH @15% on 165.35 Cost for 4.00 Nos Rate per Each: Rate as per DSR-12:

Rs 47.54 Rs 47.55

Item Code: 17.36.2 P/filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe

DSR-12

Page 761 of 2298

Code

Description

9999

MATERIALS: Cement mortar, spun yam etc.

0116 0114

LABOUR: Fitter grade-I Beldar

Details of Cost for : 4.00 Nos Unit Quantity

Rate

L.S.

8.06

1.49

Day Day

0.33 0.33

301.00 247.00 Total: 192.85

Add water charges @ 1% on

Add C.P & OH @15% on 194.78 Cost for 4.00 Nos Rate per Each: Rate as per DSR-12:

Rs 56.00 Rs 56.00

Item Code: 17.37.1 P/F M.S. holder-bat clamps of approved design to S.C.I/C.I (spun) pipe... including cost of cutting holes and making good the walls etc. : For 100 mm dia. Pipe Details of Cost for : 5.00 Nos Code Description Unit Quantity Rate MATERIALS 1331 M.S. holder bat clamps = 5 nos. each 5.00 17.00 9999 Carriage of bat clamps L.S. 2.47 1.49 LABOUR 0116 Fitter Day 0.125 301.00 0124 Mason 2nd class Day 0.75 273.00 0114 Beldar Day 0.50 247.00 9999 Sundries L.S. 7.15 1.49 C.C. Block 5x0.10x0x0.10= 0.005 cum 0295 20 mm nominal size stone aggregate cum 0.0033 1050.00 0297 10 mm nominal size stone aggregate cum 0.0011 1050.00 2202 Carriage of stone aggregate below 40 mm cum 0.0044 87.60 nominal size 0982 Coarse sand cum 0.0022 1120.00 2203 Carriage of coarse sand cum 0.0022 87.60 0367 Cement tonne 0.0016 5000.00 2209 Carriage of cement tonne 0.0016 77.87 0114 Beldar Day 0.0045 247.00 0115 Coolie Day 0.0032 247.00 0101 Bhishti Day 0.0014 260.00 0123 Mason 1 st class Day 0.0003 301.00 0124 Mason 2nd class Day 0.0003 273.00 0128 Mate Day 0.0002 260.00 9999 Hire charges of machine etc. L.S. 0.26 1.49 9999 Sundries L.S. 0.13 1.49 9999 Sundries L.S. 0.13 1.49 Total: Add water charges @ 1% on 484.25 Add C.P & OH @15% on 489.09 Cost for 5.00 Nos Rate per Each: Rate as per DSR-12:

Rs 112.49 Rs 112.50

Item Code: 17.37.2

DSR-12

Page 762 of 2298

P/F M.S. holder-bat clamps of approved design to S.C.I/C.I (spun) pipe... including cost of cutting holes and making good the walls etc. : For 75 mm dia. Pipe Details of Cost for : 5.00 Nos Code Description Unit Quantity Rate MATERIALS 1332 M.S. holder bat clamps = 5 nos. each 5.00 15.00 9999 Carriage of bat clamps L.S. 2.47 1.49 LABOUR 0116 Fitter Day 0.125 301.00 0124 Mason 2nd class Day 0.75 273.00 0114 Beldar Day 0.50 247.00 9999 Sundries L.S. 7.15 1.49 C.C. Block 5x0.10x0.10x0.10= 0.005 cum 0295 20 mm nominal size stone aggregate cum 0.0033 1050.00 0297 10 mm nominal size stone aggregate cum 0.0011 1050.00 2202 Carriage of stone aggregate below 40 mm cum 0.0044 87.60 nominal size 0982 Coarse sand cum 0.0022 1120.00 2203 Carriage of coarse sand cum 0.0022 87.60 0367 Cement tonne 0.0016 5000.00 2209 Carriage of cement tonne 0.0016 77.87 0114 Beldar Day 0.0045 247.00 0115 Coolie Day 0.0032 247.00 0101 Bhishti Day 0.0014 260.00 0123 Mason 1 st class Day 0.0003 301.00 0124 Mason 2nd class Day 0.0003 273.00 0128 Mate Day 0.0002 260.00 9999 Hire charges of machine etc. L.S. 0.26 1.49 9999 Sundries L.S. 0.13 1.49 9999 Sundries L.S. 0.13 1.49 Total: Add water charges @ 1% on 474.25 Add C.P & OH @15% on 478.99 Cost for 5.00 Nos Rate per Each: Rate as per DSR-12:

Rs 110.17 Rs 110.15

Item Code: 17.38.1.1 P/F bend of required degree with access door...bolts and nuts complete. 100 mm Sand cast iron S&S as per IS - 1729

Code 1625 1374 9999

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS: Sand Cast Iron bend with door , cost of bolts and nuts Insertion rubber washer 3mm thick Carriage of materials and fixing charges

Rate

each each

1.00 1.00

233.00 14.00

L.S.

13.52

1.49 Total: 267.14

Add water charges @ 1% on

Add C.P & OH @15% on 269.81 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 310.28 Rs 310.30

Page 763 of 2298

Item Code: 17.38.1.2 P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm Sand cast iron S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 3624 100 mm dia sand cast iron S & S bend with access door each 1.00 270.00 including cost of bolts and nuts 1374 Insertion rubber washer 3 mm thick each 1.00 14.00 9999 Carriage of materials and fixing charges L.S. 13.52 1.49 Total: Add water charges @ 1% on 304.14 Add C.P & OH @15% on 307.18 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 353.26 Rs 353.25

Item Code: 17.38.2.1 P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75 mm dia Sand cast iron S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 1624 75 mm sand cast iron bend with access door including cost of each 1.00 187.00 bolts and nuts 1373 Insertion rubber washer 3 mm thick each 1.00 11.00 9999 Carriage of materials and fixing charges L.S. 10.79 1.49 Total: Add water charges @ 1% on 214.08 Add C.P & OH @15% on 216.22 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 248.65 Rs 248.65

Item Code: 17.38.2.2 P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75 mm dia Sand cast iron S&S as per IS- 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 3625 75 mm dia send cast iron S&S bend with access door including each 1.00 215.00 cost of bolts and nuts 1373 Insertion rubber washer 3 mm thick each 1.00 11.00 9999 Carriage of materials and fixing charges L.S. 10.79 1.49 Total: Add water charges @ 1% on 242.08 Add C.P & OH @15% on 244.50 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 281.18 Rs 281.15

Page 764 of 2298

Item Code: 17.39.1.1 P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm Sand cast iron S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 1621 100 mm sand cast iron plain bend each 1.00 210.00 9999 Carriage of materials and fixing charges L.S. 13.52 1.49 Total: Add water charges @ 1% on 230.14 Add C.P & OH @15% on 232.44 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 267.31 Rs 267.30

Item Code: 17.39.1.2 P/F plain bend of required degree. 100 mm Sand cast iron S&S as per IS : 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3628 100 mm dia sand cast iron S & S plain bend each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 235.00 1.49 Total: 255.14

Add C.P & OH @15% on 257.69 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 296.34 Rs 296.35

Item Code: 17.39.2.1 P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75 mm Sand cast iron S&S as per IS -1729 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 1620 75 mm sand cast iron plain bend each 1.00 170.00 9999 Carriage of materials and fixing charges L.S. 10.79 1.49 Total: Add water charges @ 1% on 186.08 Add C.P & OH @15% on 187.94 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 216.13 Rs 216.15

Item Code: 17.39.2.2 P/F S.C.I plain bend : 75 mm dia. : SCI S&S as per IS: 3989. Code 3629 9999

DSR-12

Description MATERIALS 75 mm dia sand cast iron S&S plain bend Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 10.79

Rate 175.00 1.49

Page 765 of 2298

Add water charges @ 1% on

Total: 191.08

Add C.P & OH @15% on 192.99 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 221.94 Rs 221.95

Item Code: 17.40.1.1 P/F S.C.I heel rest bend : 100 mm dia. : SCI S & S as per IS: 1729. Code 1667 9999

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS 100 mm sand cast iron heel rest bend Carriage of materials and fixing charges

each L.S.

1.00 13.52

Add water charges @ 1% on

Rate 239.00 1.49 Total: 259.14

Add C.P & OH @15% on 261.73 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 300.99 Rs 301.00

Item Code: 17.40.1.2 P/F S.C.I heel rest bend : 100 mm dia. : SCI S & S as per IS: 3989. Code 3634 9999

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS 100 mm dia sand cast iron S & S heel rest sanitary bend Carriage of materials and fixing charges

each L.S.

1.00 13.52

Add water charges @ 1% on

Rate 275.00 1.49 Total: 295.14

Add C.P & OH @15% on 298.09 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 342.80 Rs 342.80

Item Code: 17.40.2.1 P/F S.C.I heel rest bend : 75 mm dia. : SCI S & S as per IS: 1729. Code 1666 9999

Description MATERIALS 75 mm sand cast iron heel rest bend Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 10.79

Add water charges @ 1% on

Rate 200.00 1.49 Total: 216.08

Add C.P & OH @15% on 218.24 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 250.98 Rs 251.00

Page 766 of 2298

Item Code: 17.40.2.2 P/F S.C.I heel rest bend : 75 mm dia. : SCI S & S as per IS: 3989. Code 3635 9999

Description MATERIALS 75 mm dia send cast iron S&S heel rest sanitary bend Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 10.79

Add water charges @ 1% on

Rate 240.00 1.49 Total: 256.08

Add C.P & OH @15% on 258.64 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 297.44 Rs 297.45

Item Code: 17.41.1.1 P/F double equal junction of required degree with access door, insertion rubber washer 3 mm thick...: 100x100x100x100mm SCI S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 1637 S.C.I.bend double equal junctions 100x100x100x100 mm dia with access door each 1.00 530.00 1374 Insertion rubber washer 3mm thick each 1.00 14.00 9999 Carriage of materials and fixing charges L.S. 13.39 1.49 Total: Add water charges @ 1% on 563.95 Add C.P & OH @15% on 569.59 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 655.03 Rs 655.05

Item Code: 17.41.1.2 P/F double equal junction of required degree with access door, insertion rubber washer 3 mm thick...: 100x100x100x100mm SCI S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 3654 S.C.I. S & S double equal junction with access door 100x100x100x100 mm dia each 1.00 610.00 1374 Insertion rubber washer 3mm thick each 1.00 14.00 9999 Carriage of materials and fixing charges L.S. 13.39 1.49 Total: Add water charges @ 1% on 643.95 Add C.P & OH @15% on 650.39 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 747.95 Rs 747.95

Page 767 of 2298

Item Code: 17.41.2.1 P/F double equal junction of required degree with access door, insertion rubber washer 3 mm thick...: 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 1636 S.C.I.bend double equal junctions 75x75x75x75 mm diawith access door each 1.00 395.00 1373 Insertion rubber washer 3mm thick (for 75mm) each 1.00 11.00 9999 Carriage of materials and fixing charges L.S. 10.79 1.49 Total: Add water charges @ 1% on 422.08 Add C.P & OH @15% on 426.30 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 490.25 Rs 490.25

Item Code: 17.41.2.2 P/F double equal junction of required degree with access door, insertion rubber washer 3 mm thick...: 75x75x75x75 mm Sand cast iron S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 3655 S.C.I. S & S double equal junction with access door 75x75x75x75 mm dia each 1.00 475.00 1373 Insertion rubber washer 3mm thick (for 75mm) each 1.00 11.00 9999 Carriage of materials and fixing charges L.S. 10.79 1.49 Total: Add water charges @ 1% on 502.08 Add C.P & OH @15% on 507.10 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 583.17 Rs 583.15

Item Code: 17.42.1.1 P/F double equal plain junction of required degree. 100x100x100x100 mm SCI S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1634 S.C.I. plain bend double equal junctions : 100x100x100x100 mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52

DSR-12

Rate

490.00

Add water charges @ 1% on

1.49 Total: 510.14

Add C.P & OH @15% on

515.24

Page 768 of 2298

Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 592.53 Rs 592.55

Item Code: 17.42.1.2 P/F double equal plain junction of required degree. 100x100x100x100 mm SCI S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 3650 S.C.I. S & S plain double equal junction 100x100x100 mm dia

9999

Rate

each

1.00

565.00

L.S.

13.52

1.49 Total: 585.14

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on 590.99 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 679.64 Rs 679.65

Item Code: 17.42.2.1 P/F double equal plain junction of required degree. 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1633 S.C.I. plain bend double equal junctions : 75x75x75x75 mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 10.79 Add water charges @ 1% on

Rate

335.00 1.49 Total: 351.08

Add C.P & OH @15% on 354.59 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 407.78 Rs 407.80

Item Code: 17.42.2.2 P/F double equal plain junction of required degree. 75x75x75x75 mm SCI S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 3651 S.C.I. S & S plain double equal junction 75x75x75 mm dia

9999

DSR-12

Rate

each

1.00

450.00

L.S.

10.79

Add water charges @ 1% on

1.49 Total: 466.08

Add C.P & OH @15% on

470.74

Carriage of materials and fixing charges

Page 769 of 2298

Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 541.35 Rs 541.35

Item Code: 17.43.1.1 P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1631 S.C.I.bend single equal junctions 100x100x100 mm dia with access door each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 1374 Insertion rubber washer 3mm thick each 1.00 Add water charges @ 1% on

Rate

350.00 1.49 14.00 Total: 384.14

Add C.P & OH @15% on 387.98 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 446.18 Rs 446.20

Item Code: 17.43.1.2 P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 3644 100x100x100mm centrifugally cast (spun) iron S&S single each 1.00 equal plain junction 9999 Carriage of materials and fixing charges L.S. 13.52 1374 Insertion rubber washer 3mm thick each 1.00 Add water charges @ 1% on

Rate 465.00

1.49 14.00 Total: 499.14

Add C.P & OH @15% on 504.13 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 579.75 Rs 579.75

Item Code: 17.43.2.1 P/F single equal plain junction of required degree. 75x75x75 mm Sand cast iron S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1630 S.C.I.bend single equal junctions 75x75x75 mm dia with access door each 1.00 9999 Carriage of materials and fixing charges L.S. 10.79 1373 Insertion rubber washer 3mm thick (for 75mm) each 1.00 Add water charges @ 1% on

DSR-12

Rate

260.00 1.49 11.00 Total: 287.08

Page 770 of 2298

Add C.P & OH @15% on 289.95 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 333.44 Rs 333.45

Item Code: 17.43.2.2 P/F single equal plain junction of required degree. 75x75x75 mm Sand cast iron S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 3645 75x75x75 mm centrifugally cast (spun) S&S sigle equal each 1.00 junction with door 9999 Carriage of materials and fixing charges L.S. 10.79 1373 Insertion rubber washer 3mm thick (for 75mm) each 1.00 Add water charges @ 1% on

Rate 350.00

1.49 11.00 Total: 377.08

Add C.P & OH @15% on 380.85 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 437.98 Rs 438.00

Item Code: 17.44.1.1 P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity 1628 S.C.I. plain bend single equal junctions : 100x100x100 mm dia

9999

Rate

each

1.00

310.00

L.S.

13.52

1.49 Total: 330.14

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on 333.44 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 383.46 Rs 383.45

Item Code: 17.44.1.2 P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 3640 S.C.I. S&S single equal junctions100x100x100 mm each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 430.00 1.49 Total: 450.14

Add C.P & OH @15% on 454.64 Cost for 1.00 No.

DSR-12

Page 771 of 2298

Rate per Each: Rate as per DSR-12:

Rs 522.84 Rs 522.85

Item Code: 17.44.2.1 P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 1729 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1627 S.C.I. plain bend single equal junctions :75x75x75 mm dia

9999

Rate

each

1.00

240.00

L.S.

10.79

1.49 Total: 256.08

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on 258.64 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 297.44 Rs 297.45

Item Code: 17.44.2.2 P/F single equal plain junction of required degree. 75x75x75 mm Sand cast iron S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 3641 S.C.I. S & S plain double equal junction 75x75x75x75 mm dia

9999

Rate

each

1.00

310.00

L.S.

10.79

1.49 Total: 326.08

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on 329.34 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 378.74 Rs 378.75

Item Code: 17.45.1.1 P/F double unequal junction of required degree with access door : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 1729.

Code 1662 1374 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 100x100x75x75 mm sand cast iron branch with access door each including cost of bolts and nuts Insertion rubber washer 3 mm thick each Carriage of materials and fixing charges L.S.

Rate

1.00

550.00

1.00 13.52

14.00 1.49 Total: 584.14

Add water charges @ 1% on

Add C.P & OH @15% on 589.98 Cost for 1.00 No.

DSR-12

Page 772 of 2298

Rate per Each: Rate as per DSR-12:

Rs 678.48 Rs 678.50

Item Code: 17.45.1.2 P/F double unequal junction of required degree with access door : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 3989.

Code 3674 1374 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 100x100x75x75 mm sand cast iron S&S double unequal each junction with access door including c Insertion rubber washer 3 mm thick each Carriage of materials and fixing charges L.S.

Rate

1.00

850.00

1.00 13.52

14.00 1.49 Total: 884.14

Add water charges @ 1% on

Add C.P & OH @15% on 892.98 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1026.93 Rs 1026.95

Item Code: 17.46.1.1 P/F double unequal plain jun- ction of required degree : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 1729.

Code 1659 9999

Description MATERIALS 100X100X75X75 mm junction Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 13.52

Add water charges @ 1% on

Rate 510.00 1.49 Total: 530.14

Add C.P & OH @15% on 535.44 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 615.76 Rs 615.75

Item Code: 17.46.1.2 P/F double unequal plain jun- ction of required degree : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 1729.

Code 3670 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 100x100x75x75 mm sand cast iron S&S double unequal plain each junction Carriage of materials and fixing charges L.S.

Rate

1.00

780.00

13.52

1.49 Total: 800.14

Add water charges @ 1% on

Add C.P & OH @15% on 808.14 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 929.36 Rs 929.35

Page 773 of 2298

Item Code: 17.47.1.1 P/F SCI unequal junction with access door : 100 x 100 x 75 mm : SCI S & S as per IS: 1729. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1656 100x100x75 mm S.C.I, single unequal junction with access each 1.00 door including cost of bolts and 1374 Insertion rubber washer 3 mm thick each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 390.00 14.00 1.49 Total: 424.14

Add C.P & OH @15% on 428.38 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 492.64 Rs 492.65

Item Code: 17.47.1.2 P/F SCI unequal junction with access door : 100 x 100 x 75 mm : SCI S & S as per IS: 3989. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3664 100x100x75 mm sand cast iron S&S single unequal junction each 1.00 with access door including cost 1374 Insertion rubber washer 3 mm thick each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 630.00 14.00 1.49 Total: 664.14

Add C.P & OH @15% on 670.78 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 771.40 Rs 771.40

Item Code: 17.48.1.1 P/F single unequal plain jun- ction of required degree : 100 x 100 x 75 mm : SCI S & S as per IS: 1729. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one no. MATERIALS 1653 100X100X75 mm junction each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate

350.00 1.49 Total: 370.14

Add C.P & OH @15% on 373.84 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 429.92 Rs 429.90

Item Code: 17.48.1.2 P/F single unequal plain jun- ction of required degree : 100 x 100 x 75 mm : SCI S & S as per IS: 3989.

DSR-12

Page 774 of 2298

Code 3660 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 100x100x75 mm sand cast iron S&S single unequal plain each junction Carriage of materials and fixing charges L.S.

Rate

1.00

560.00

13.52

1.49 Total: 580.14

Add water charges @ 1% on

Add C.P & OH @15% on 585.94 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 673.83 Rs 673.85

Item Code: 17.49.1.1 P/F double equal plain invert branch of required degree : 100 x 100 x 100 x 100 mm : SCI S & S as per IS: 1729.

Code 1673 9999

Description MATERIALS 100X100X100x100 mm sand cast iron invert branch Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 13.52

Add water charges @ 1% on

Rate 510.00 1.49 Total: 530.14

Add C.P & OH @15% on 535.44 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 615.76 Rs 615.75

Item Code: 17.49.1.2 P/F double equal plain invert branch of required degree : 100 x 100 x 100 x 100 mm : SCI S & S as per IS: 3989.

Code 3685 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 100x 100x 100 x 100 mm send cast iron S&S double equal each plain invert branch Carriage of materials and fixing charges L.S.

Rate

1.00

525.00

13.52

1.49 Total: 545.14

Add water charges @ 1% on

Add C.P & OH @15% on 550.59 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 633.18 Rs 633.20

Item Code: 17.49.2.1 P/F double equal plain invert branch of required degree : 75 x 75 x 75 x 75 mm : SCI S & S as per IS: 1729. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1672 75X75X75x75 mm sand cast iron invert branch each 1.00 9999 Carriage of materials and fixing charges L.S. 10.79

DSR-12

Rate 382.00 1.49

Page 775 of 2298

Add water charges @ 1% on

Total: 398.08

Add C.P & OH @15% on 402.06 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 462.37 Rs 462.35

Item Code: 17.49.2.2 P/F double equal plain invert branch of required degree : 75 x 75 x 75 x 75 mm : SCI S & S as per IS: 3989. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3686 75x75x75x75 mm centrifugally cast(spun) iron S&S double each 1.00 equal plain invert branch 9999 Carriage of materials and fixing charges L.S. 10.79 Add water charges @ 1% on

Rate 405.00 1.49 Total: 421.08

Add C.P & OH @15% on 425.29 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 489.08 Rs 489.10

Item Code: 17.50.1.1 P/F single equal plain invert branch of required degree : 100 x 100 x 100 mm : SCI S & S as per IS: 1729. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1670 100X100X100 mm sand cast iron invert branch each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 387.00 1.49 Total: 407.14

Add C.P & OH @15% on 411.21 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 472.89 Rs 472.90

Item Code: 17.50.1.2 P/F single equal plain invert branch of required degree : 100 x 100 x 100 mm : SCI S & S as per IS: 3989. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3681 100x100x100 mm sand cast iron S&S single equal plain invert each 1.00 branch 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 395.00 1.49 Total: 415.14

Add C.P & OH @15% on 419.29 Cost for 1.00 No. Rate per Each:

DSR-12

Rs 482.18

Page 776 of 2298

Rate as per DSR-12:

Rs 482.20

Item Code: 17.50.2.1 P/F single equal plain invert branch of required degree : 75 x 75 x 75 mm : SCI S & S as per IS: 1729. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1669 75X75X75 mm sand cast-iron invert branch each 1.00 9999 Carriage of materials and fixing charges L.S. 10.79 Add water charges @ 1% on

Rate 290.00 1.49 Total: 306.08

Add C.P & OH @15% on 309.14 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 355.51 Rs 355.50

Item Code: 17.50.2.2 P/F single equal plain invert branch of required degree : 75 x 75 x 75 mm : SCI S & S as per IS: 3989. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3682 75x75x75 mm sand cast iron S & S single equal plain invert each 1.00 branch 9999 Carriage of materials and fixing charges L.S. 10.79 Add water charges @ 1% on

Rate 303.00 1.49 Total: 319.08

Add C.P & OH @15% on 322.27 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 370.61 Rs 370.60

Item Code: 17.51.1.1 P/F double unequal invert branch of required degree : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 3989. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1677 100X100X75x75 mm sand cast iron invert branch each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 545.00 1.49 Total: 565.14

Add C.P & OH @15% on 570.79 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 656.41 Rs 656.40

Item Code: 17.51.1.2 P/F double unequal invert branch of required degree : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 3989. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS

DSR-12

Rate

Page 777 of 2298

3695 9999

100x100x75x75 mm sand cast iron S&S double unequal plain each invert branch Carriage of materials and fixing charges L.S.

1.00

700.00

13.52

1.49 Total: 720.14

Add water charges @ 1% on

Add C.P & OH @15% on 727.34 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 836.44 Rs 836.45

Item Code: 17.52.1.1 P/F single unequal plain invert branch of required degree : 100 x 100 x 75 mm : SCI S & S as per IS: 1729. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1674 100X100X75 mm sand cast iron invert branch each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 466.00 1.49 Total: 486.14

Add C.P & OH @15% on 491.00 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 564.65 Rs 564.65

Item Code: 17.52.1.2 P/F single unequal plain invert branch of required degree : 100 x 100 x 75 mm : SCI S & S as per IS: 3989. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3690 100x100x75 mm sand cast iron S&S single unequal plain each 1.00 invert branch 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 505.00 1.49 Total: 525.14

Add C.P & OH @15% on 530.39 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 609.95 Rs 609.95

Item Code: 17.53.1.1 P/F sand cast iron S & S off sets as per IS: 1729: 76 mm off sets : With 75 mm dia. pipe. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3746 76 mm sand cast iron S&S offset with 75 mm dia pipe each 1.00 9999 Carriage of materials and fixing charges L.S. 10.79 Add water charges @ 1% on

Rate 215.00 1.49 Total: 231.08

Add C.P & OH @15% on 233.39 Cost for 1.00 No.

DSR-12

Page 778 of 2298

Rate per Each: Rate as per DSR-12:

Rs 268.40 Rs 268.40

Item Code: 17.53.1.2 P/F sand cast iron S & S off sets as per IS: 1729: 76 mm off sets : With 100 mm dia. pipe. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3747 76 mm sand cast iron S&S offset with 100 mm dia pipe each 1.00 9999 Carriage of materials and fixing charges L.S. 10.79 Add water charges @ 1% on

Rate 246.00 1.49 Total: 262.08

Add C.P & OH @15% on 264.70 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 304.41 Rs 304.40

Item Code: 17.53.2.1 P/F sand cast iron S & S off sets as per IS: 1729: 114 mm off sets : With 75 mm dia. pipe. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3712 114 mm sand cast iron S&S offset with 75 mm dia pipe each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 270.00 1.49 Total: 290.14

Add C.P & OH @15% on 293.04 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 337.00 Rs 337.00

Item Code: 17.53.2.2 P/F sand cast iron S & S off sets as per IS: 1729: 114 mm off sets : With 100 mm dia. pipe. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3713 114 mm sand cast iron S&S offset with 100 mm dia pipe each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 355.00 1.49 Total: 375.14

Add C.P & OH @15% on 378.89 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 435.72 Rs 435.70

Item Code: 17.53.3.1 P/F sand cast iron S & S off sets as per IS: 1729: 152 mm off sets : With 75 mm dia. pipe. Details of Cost for : 1.00 No. Code Description Unit Quantity

DSR-12

Rate

Page 779 of 2298

3716 9999

MATERIALS 152 mm sand cast iron S&S offset with 75 mm dia pipe Carriage of materials and fixing charges

each L.S.

1.00 17.94

Add water charges @ 1% on

335.00 1.49 Total: 361.73

Add C.P & OH @15% on 365.35 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 420.15 Rs 420.15

Item Code: 17.53.3.2 P/F sand cast iron S & S off sets as per IS: 1729: 152 mm off sets : With 100 mm dia. pipe. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3717 152 mm sand cast iron S&S offset with 100 mm dia pipe each 1.00 9999 Carriage of materials and fixing charges L.S. 17.94 Add water charges @ 1% on

Rate 440.00 1.49 Total: 466.73

Add C.P & OH @15% on 471.40 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 542.11 Rs 542.10

Item Code: 17.54.1.1 P/F SCI S & S off sets as per IS: 3989: 75 mm off sets : With 75 mm dia. pipe. Code 3699 9999

Description MATERIALS 75 mm sand cast iron S&S offset with 75 mm dia pipe Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 10.79

Add water charges @ 1% on

Rate 215.00 1.49 Total: 231.08

Add C.P & OH @15% on 233.39 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 268.40 Rs 268.40

Item Code: 17.54.2.1 P/F SCI S & S off sets as per IS: 3989: 150 mm off sets : With 75 mm dia. pipe. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3707 150 mm sandcast iron S&S offset with 75 mm dia pipe each 1.00 9999 Carriage of materials and fixing charges L.S. 16.12 Add water charges @ 1% on

Rate 270.00 1.49 Total: 294.02

Add C.P & OH @15% on 296.96 Cost for 1.00 No.

DSR-12

Page 780 of 2298

Rate per Each: Rate as per DSR-12:

Rs 341.50 Rs 341.50

Item Code: 17.54.2.2 P/F SCI S & S off sets as per IS: 3989: 150 mm off sets : With 100 mm dia. pipe. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3708 150 mm sand cast iron S&S offset with 100 mm dia pipe each 1.00 9999 Carriage of materials and fixing charges L.S. 16.12 Add water charges @ 1% on

Rate 370.00 1.49 Total: 394.02

Add C.P & OH @15% on 397.96 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 457.65 Rs 457.65

Item Code: 17.55.1.1 P/F door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 100 mm : SCI S & S as per IS: 1729.

Code 1683 1374 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 100 mm sand cast iron door piece including cost of bolts and each nuts Insertion rubber washer each Carriage of materials and fixing charges L.S.

Rate

1.00

350.00

1.00 13.52

14.00 1.49 Total: 384.14

Add water charges @ 1% on

Add C.P & OH @15% on 387.98 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 446.18 Rs 446.20

Item Code: 17.55.1.2 P/F door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 100 mm : SCI S & S as per IS: 3989.

Code 3728 1374 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 100 mm sand cast iron S&S door piece including cost of bolts each and nuts Insertion rubber washer each Carriage of materials and fixing charges L.S.

Rate

1.00

370.00

1.00 13.52

14.00 1.49 Total: 404.14

Add water charges @ 1% on

Add C.P & OH @15% on 408.18 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 469.41 Rs 469.40

Page 781 of 2298

Item Code: 17.55.2.1 P/F door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 75 mm : SCI S & S as per IS: 1729.

Code 1682 1373 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 75 mm sand cast iron door piece including cost of bolts and each nuts Insertion rubber washer each Carriage of materials and fixing charges L.S.

Rate

1.00

253.00

1.00 10.79

11.00 1.49 Total: 280.08

Add water charges @ 1% on

Add C.P & OH @15% on 282.88 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 325.31 Rs 325.30

Item Code: 17.55.2.2 P/F door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 75 mm : SCI S & S as per IS: 1729.

Code 3729 1373 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS 75 mm sand cast iron S&S door piece including cost of bolts each and nuts Insertion rubber washer each Carriage of materials and fixing charges L.S.

Rate

1.00

260.00

1.00 10.79

11.00 1.49 Total: 287.08

Add water charges @ 1% on

Add C.P & OH @15% on 289.95 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 333.44 Rs 333.45

Item Code: 17.56.1.1 P/Fterminal guard: 100 mm Sand cast iron S&S as per IS - 1729 Code

Description

1640

MATERIALS: Slotted cowl (terminal guard ): 100 mm dia

9999

Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

187.00

L.S.

13.52

1.49 Total: 207.14

Add water charges @ 1% on

Add C.P & OH @15% on 209.21 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 240.59 Rs 240.60

Page 782 of 2298

Item Code: 17.56.1.2 P/Fterminal guard: 100 mm Sand cast iron S&S as per IS - 3989 Details of Cost for : 1.00 No. Unit Quantity

Code

Description

3733

MATERIALS: Centrifugally cast iron(spun) slotted cowl(terminal guard) : 100 mm dia

9999

Carriage of materials and fixing charges

Rate

each

1.00

190.00

L.S.

13.52

1.49 Total: 210.14

Add water charges @ 1% on

Add C.P & OH @15% on 212.24 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 244.08 Rs 244.10

Item Code: 17.56.2.1 P/Fterminal guard: 75 mm Sand cast iron S&S as per IS - 1729 Code

Details of Cost for : 1.00 No. Unit Quantity

Description

1639

MATERIALS: Slotted cowl (terminal guard ): 75 mm dia

9999

Carriage of materials and fixing charges

Rate

each

1.00

137.00

L.S.

10.79

1.49 Total: 153.08

Add water charges @ 1% on

Add C.P & OH @15% on 154.61 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 177.80 Rs 177.80

Item Code: 17.56.2.2 P/Fterminal guard: 75 mm Sand cast iron S&S as per IS - 3989 Details of Cost for : 1.00 No. Unit Quantity

Code

Description

3734

MATERIALS: Centrifugally cast iron (spun) slotted cowl(terminal guard) : 75 mm dia

9999

Carriage of materials and fixing charges

Rate

each

1.00

175.00

L.S.

10.79

1.49 Total: 191.08

Add water charges @ 1% on

Add C.P & OH @15% on 192.99 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 221.94 Rs 221.95

Item Code: 17.57.1.1

DSR-12

Page 783 of 2298

P/F collar : 100 mm : SCI S & S as per IS: 1729. Code 1686 9999

Description MATERIALS 100 mm sand cast iron collar Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 13.52

Add water charges @ 1% on

Rate 133.00 1.49 Total: 153.14

Add C.P & OH @15% on 154.67 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 177.87 Rs 177.85

Item Code: 17.57.1.2 P/F collar : 100 mm : SCI S & S as per IS: 1729. Code 3738 9999

Description MATERIALS. 100 sand cast iron S&S collar Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 13.52

Add water charges @ 1% on

Rate 185.00 1.49 Total: 205.14

Add C.P & OH @15% on 207.19 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 238.27 Rs 238.25

Item Code: 17.57.2.1 Code 1685 9999

Description MATERIALS 75 mm sand cast iron collar Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 10.79

Add water charges @ 1% on

Rate 98.00 1.49 Total: 114.08

Add C.P & OH @15% on 115.22 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 132.50 Rs 132.50

Item Code: 17.57.2.2 P/F collar : 75 mm : SCI S & S as per IS: 1729. Code 3739 9999

DSR-12

Description MATERIALS 75 mm sand cast iron S&S collar Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 10.79

Rate

Add water charges @ 1% on

130.00 1.49 Total: 146.08

Add C.P & OH @15% on

147.54

Page 784 of 2298

Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 169.67 Rs 169.65

Item Code: 17.58.1 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 100 mm

Code

Description

1397 1881 9999

MATERIALS: Pig lead Spun yarn or plain gaskin Kerosene oil, fuel and other sundries

9999

Carriage of materials

0116 0117 0114

LABOUR: Fitter grade-I Assistant Fitter or II class Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

kilog kilog

0.98 0.11

90.00 40.00

L.S.

13.52

1.49

L.S.

1.43

1.49

Day Day Day

0.06 0.06 0.12

301.00 273.00 247.00 Total: 178.95

Add water charges @ 1% on

Add C.P & OH @15% on 180.74 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 207.85 Rs 207.85

Item Code: 17.58.2 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 75 mm

Code

1397 1881 9999 9999 0116 0117 0114

Description Details of cost for one joint MATERIALS Pig lead Spun yarn Kerosene oil, fuel and other sundries Carriage of materials LABOUR Fitter Asstt. Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

kilog kilog L.S. L.S.

0.88 0.09 10.79 1.43

90.00 40.00 1.49 1.49

Day Day Day

0.05 0.05 0.09

301.00 273.00 247.00 Total: 151.94

Add water charges @ 1% on

Add C.P & OH @15% on 153.46 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 176.48 Rs 176.50

Item Code: 17.58.3 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 50 mm

DSR-12

Page 785 of 2298

Code

1397 1881 9999 9999 0116 0117 0114

Description Details of cost for one joint MATERIALS Pig lead Spun yarn Kerosene oil, fuel and other sundries Carriage of materials LABOUR Fitter Asstt. Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

kilog kilog L.S. L.S.

0.77 0.06 6.76 1.43

90.00 40.00 1.49 1.49

Day Day Day

0.04 0.05 0.05

301.00 273.00 247.00 Total: 121.94

Add water charges @ 1% on

Add C.P & OH @15% on 123.16 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 141.63 Rs 141.65

Item Code: 17.59.1 P/F M.S. stays and clamps forSCI/centrifugally cast (spun) iron pipes of diameter : 100 mm Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one no. MATERIALS 1330 M.S. stayes & clamps including bolts and nuts for 100 mm each 1.00 pipe 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate

33.00 1.49 Total: 53.14

Add C.P & OH @15% on 53.67 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 61.72 Rs 61.70

Item Code: 17.59.2 P/F M.S. stays and clamps forSCI/centrifugally cast (spun) iron pipes of diameter : 75 mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1335 Clamps and M.S. stays including bolts and nuts for 75 mm pipe each 1.00 9999 Carriage of materials and fixing charges L.S. 10.79 Add water charges @ 1% on

Rate

29.00 1.49 Total: 45.08

Add C.P & OH @15% on 45.53 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 52.36 Rs 52.35

Page 786 of 2298

Item Code: 17.59.3 P/F M.S. stays and clamps forSCI/centrifugally cast (spun) iron pipes of diameter : 50 mm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1334 Clamps and M.S. stays including bolts and nuts for 50 mm pipe each 1.00 9999 Carriage of materials and fixing charges L.S. 9.49 Add water charges @ 1% on

Rate

25.00 1.49 Total: 39.14

Add C.P & OH @15% on 39.53 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 45.46 Rs 45.45

Item Code: 17.60.1.1 P/F SCI trap of self cleaning design 100mm inlet and 100mm outlet SCI S & S Code 7808 9999 9999 0123 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS Sand cast iron S&S 100 mm inlet and 100 mm outlet Cement, sand and grit etc. Carriage of materials LABOUR Mason 1st class Beldar

Rate

each L.S. L.S.

1.00 13.52 2.73

392.00 1.49 1.49

Day Day

0.50 0.50

301.00 247.00 Total: 690.21

Add water charges @ 1% on

Add C.P & OH @15% on 697.11 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 801.68 Rs 801.70

Item Code: 17.60.1.2 P/F SCI trap of self cleaning design 100mm inlet and 100mm outlet SCI S & S Code 1897 9999 9999 0123 0114

Description MATERIALS Sand cast iron trap with 100 mm inlet and 100 mm outlet Cement, sand and grit etc. Carriage of materials LABOUR Mason 1st class Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

263.00

L.S. L.S.

13.52 2.73

1.49 1.49

Day Day

0.50 0.50

301.00 247.00 Total: 561.21

Add water charges @ 1% on

Add C.P & OH @15% on 566.82 Cost for 1.00 No.

DSR-12

Page 787 of 2298

Rate per Each: Rate as per DSR-12:

Rs 651.84 Rs 651.85

Item Code: 17.60.2.1 P/F trap of self cleansing design with screwed down or hinged grating with or without vent arm complete... 100 mm inlet and 75 mm outlet SCI S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate 7809 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet each 1.00 424.00 9999 Cement, sand and grit etc. L.S. 13.52 1.49 9999 Carriage of materials L.S. 2.73 1.49 0123 Mason I class Day 0.50 301.00 0114 Beldar Day 0.50 247.00 Total: Add water charges @ 1% on 722.21 Add C.P & OH @15% on 729.43 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 838.84 Rs 838.85

Item Code: 17.60.2.2 P/F trap of self cleansing design with screwed down or hinged grating with or without vent arm complete... 100 mm inlet and 75 mm outlet SCI S&S as per IS - 3989 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 1898 SCI trap 100mm inlet 75mm outlet each 1.00 198.00 9999 Cement, sand and grit etc. L.S. 13.52 1.49 9999 Carriage of materials L.S. 2.73 1.49 LABOUR: 0123 Mason I class Day 0.50 301.00 0114 Beldar Day 0.50 247.00 Total: Add water charges @ 1% on 496.21 Add C.P & OH @15% on 501.17 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 576.35 Rs 576.35

Item Code: 17.61.1 Cutting chases in brick mason- ry walls for sand cast iron/ centrifugally cast (spun) iron pipes 100 mm dia.

Code

Description

Details of Cost for : 1.00 No. Unit Quantity

Rate

MATERIALS Cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate )

DSR-12

Page 788 of 2298

04.002.05 9999 9999 0123 0114

P/L CC walls, columns, string courses, coping, bed blocks, window sills etc. up to floor f Plastering in cement mortar 1:4 L.S. Carriage of materials L.S. LABOUR Mason 1st class Day Beldar Day

0.022

4782.36

10.40 4.16

1.49 1.49

0.14 0.27

301.00 247.00 Total: 130.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 131.84 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 256.83 Rs 252.10

Item Code: 17.61.2 Cutting chases in brick mason- ry walls for sand cast iron/ centrifugally cast (spun) iron pipes 75 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS Cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate ) 04.002.05 P/L CC walls, columns, string courses, coping, bed blocks, 0.015 window sills etc. up to floor f 9999 Plastering in cement mortar 1:4 L.S. 7.80 9999 Carriage of materials L.S. 3.51 LABOUR 0123 Mason 1st class Day 0.10 0114 Beldar Day 0.20 Add water charges @ 1% except on [A] i.e on

Rate

4782.36 1.49 1.49 301.00 247.00 Total: 96.35

Add C.P & OH @15% except on [A] i.e on 97.31 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 183.65 Rs 180.40

Item Code: 17.61.3 Cutting chases in brick mason- ry walls for sand cast iron/ centrifugally cast (spun) iron pipes 50 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS Cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate ) 04.002.05 P/L CC walls, columns, string courses, coping, bed blocks, 0.008 window sills etc. up to floor f 9999 Plastering in cement mortar 1:4 L.S. 5.20 9999 Carriage of materials L.S. 2.73 LABOUR 0123 Mason 1st class Day 0.07 0114 Beldar Day 0.14 Add water charges @ 1% except on [A] i.e on

Rate

4782.36 1.49 1.49 301.00 247.00 Total: 67.47

Add C.P & OH @15% except on [A] i.e on 68.14 Cost for 1.00 No.

DSR-12

Page 789 of 2298

Rate per Each: Rate as per DSR-12:

Rs 116.62 Rs 114.90

Item Code: 17.62 Painting CI cistern for with bitumastic paint new work . Code

0828 4202 0834 9999 9999 0131 0114

Details of Cost for : 1.00 No. Unit Quantity

Description Details of cost for one cistern with fittings MATERIALS Anticorrosive bitumastic paint ( of approved quality) Red oxide Zinc chromate yellow primer Synthetic enamel paint Carriage of materials Sundries (brush sand paper etc.) LABOUR Painter Beldar

Rate

litre

0.23

85.00

litre litre L.S. L.S.

0.20 0.40 1.43 6.76

68.00 135.00 1.49 1.49

Day Day

0.25 0.50

273.00 247.00 Total: 291.10

Add water charges @ 1% on

Add C.P & OH @15% on 294.01 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 338.11 Rs 338.10

Item Code: 17.63 Re-painting CI cistern with bitumastic Code

0828 0834 9999 9999 0131 0114

Description Details of cost for one cistern with fittings MATERIALS Anticorrosive bitumastic paint ( of approved quality) Synthetic enamel paint Polishing of wooden seat and cleaning of W.C. pan with acid Sundries and carriage of materials LABOUR Painter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

litre litre L.S.

0.23 0.20 20.67

85.00 135.00 1.49

L.S.

7.15

1.49

Day Day

0.20 0.25

273.00 247.00 Total: 204.35

Add water charges @ 1% on

Add C.P & OH @15% on 206.39 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 237.35 Rs 237.35

Item Code: 17.64 Repainting CI cistern with synthetic enamel paint on the outside surface of cistern Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 0834 Synthetic enamel paint litre 0.20

DSR-12

Rate 135.00

Page 790 of 2298

9999 0131 0114

Sundries and carriage of materials LABOUR Painter Beldar

L.S.

3.64

1.49

Day Day

0.09 0.12

273.00 247.00 Total: 86.63

Add water charges @ 1% on

Add C.P & OH @15% on 87.50 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 100.63 Rs 100.60

Item Code: 17.65.1 Painting SCI / centrifugally C(spun) I soil, waste vent pipes any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100mm dia Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS Perimeter = 3.14x 110 mm =345.71 Area 10x0.3457 = 3.46 sqm Priming coat 13.050.03 Applying priming coat : With ready mixed red oxide zinc 3.46 20.72 chromate primer on steel galvanise Painting two coats with paint of any colour such as chocalate, grey or buff etc. 13.061.01 Painting with synthetic enamel paint : Two or more coats on 3.46 53.87 new work 9999 Add for delay L.S. 17.16 1.49 Total: Add water charges @ 1% except on [A]+[B] i.e on 25.57 Add C.P & OH @15% except on [A]+[B] i.e on 25.83 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 28.78 Rs 28.75

Item Code: 17.65.2 Painting SCI / centrifugally C(spun) I soil, waste vent pipes - paint of any colour - . over a coat of primer for new work : 75mm dia pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Perimeter = 3.14x82 mm = 257.71 Area = 10x0.2577 = 2.577 sqm say : 2.60sqm 13.050.03 13.061.01 9999

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise Painting with synthetic enamel paint : Two or more coats on Sqm new work Add for delay L.S.

2.60

20.72

2.60

53.87

15.21

1.49 Total: 22.66

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 22.89 Cost for 10.00 m

DSR-12

Page 791 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 22.03 Rs 22.00

Item Code: 17.66.1 Repainting SCI / centrifugally CI (spun), soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc : 100 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Painting one coat with paint of any colour such as chocolate,grey or buff etc. 14.054.01 Painting with synthetic enamel paint - : One or more coats on 3.46 35.19 old work. 9999 Add for delay L.S. 12.22 1.49 Total: Add water charges @ 1% except on [A] i.e on 18.21 Add C.P & OH @15% except on [A] i.e on 18.39 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 14.29 Rs 14.30

Item Code: 17.66.2 Repainting SCI / centrifugally CI (spun), soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Painting one coat with paint of any colour such as chocolate,grey or buff etc. 14.054.01 Painting with synthetic enamel paint - : One or more coats on 2.577 35.19 old work. 9999 Add for delay L.S. 9.49 1.49 Total: Add water charges @ 1% except on [A] i.e on 14.14 Add C.P & OH @15% except on [A] i.e on 14.28 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 10.71 Rs 10.70

Item Code: 17.67 Repainting bath tub of size 1700 x 730 x 430 mm with enamel paint. Code 0830 9999 0131 0115

Description MATERIALS Paint of approved quality Sundries LABOUR Painter Coolie

Details of Cost for : 1.00 No. Unit Quantity

Rate

litre L.S.

0.90 6.76

125.00 1.49

Day Day

0.25 0.25

273.00 247.00 Total: 252.57

Add water charges @ 1% on

Add C.P & OH @15% on 255.10 Cost for 1.00 No.

DSR-12

Page 792 of 2298

Rate per Each: Rate as per DSR-12:

Rs 293.37 Rs 293.35

Item Code: 17.68.1 P/F vitreous china dual purpo- se closet suitable for use as squatting pan or European type water closet (Anglo Indian WC pan) : White vitreous china dual purpose WC pan with white solid plastic seat and lid.

Code 1875 1965 7006 9999 1350 9999 9999 9999 9999 0116 0123 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS White plastic seat and lid with C.P. brass hinges and rubber bufers etc. White vitreous china dual prupose closet (anglo India W.C. pan ) 10 litre white vitreous china low level flushing cistern with fittings and brackets and 40 20 mm G.I. over flow pipe and specials for over flow pipe Mosquito proof coupling of approved municipal design Plugs, screws etc. Red lead, white lead and gaskin etc. Cement,sand and grit Carriage of materials LABOUR Fitter Mason 1st class Beldar

Rate

each

1.00

310.00

each

1.00

1250.00

each

1.00

1550.00

L.S.

276.25

1.49

each L.S. L.S. L.S. L.S.

1.00 59.15 71.76 118.43 118.43

27.00 1.49 1.49 1.49 1.49

1.00 1.00 1.00

301.00 301.00 247.00 Total: 4945.58

Day Day Day

Add water charges @ 1% on

Add C.P & OH @15% on 4995.04 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 5744.30 Rs 5744.30

Item Code: 17.69.1 P/F P.T.M.T waste coupling for wash basin and sink : Waste coupling 31 mmof 79 mm length and 62mm breadth wei- ghing not less than 45 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS : 7491 P.T.M.T. waste coupling 31/32 mm Each 1.00 51.00 9999 Carriage of materials and fixing charges L.S. 20.28 1.49 Total: Add water charges @ 1% on 81.22 Add C.P & OH @15% on 82.03 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 94.33 Rs 94.35

Item Code: 17.69.2 P/F PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 60gms. Details of Cost for : 1.00 No.

DSR-12

Page 793 of 2298

Code 7492

Description MATERIALS: Waste coupling 38/40 mm

9999

Carriage of materials and fixing charges

Unit

Quantity

Rate

Each

1.00

64.00

L.S.

20.28

1.49 Total: 94.22

Add water charges @ 1% on

Add C.P & OH @15% on 95.16 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 109.43 Rs 109.45

Item Code: 17.70.1 P/F PTMT Waste Bottle Trap for wash basin and sink, of approved quality and colour. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7493 Bottle Trap 31/32 mm Each 1.00 317.00 9999 Carriage of materials and fixing charges L.S. 20.28 1.49 Total: Add water charges @ 1% on 347.22 Add C.P & OH @15% on 350.69 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 403.29 Rs 403.30

Item Code: 17.70.2 P/F PTMT Waste Bottle Trap for wash basin and sink, of approved quality and colour. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7494 Bottle Trap 38/40 mm Each 1.00 345.00 9999 Carriage of materials and fixing charges L.S. 20.28 1.49 Total: Add water charges @ 1% on 375.22 Add C.P & OH @15% on 378.97 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 435.82 Rs 435.30

Item Code: 17.71 P/F PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings Details of Cost for : 1.00 No.

DSR-12

Page 794 of 2298

Code 7503

Description MATERIALS: PTMT Liquid soap container of 400 ml. capacity

9999

Carriage of materials and fixing charges

Unit

Quantity

Rate

Each

1.00

145.00

L.S.

6.76

1.49 Total: 155.07

Add water charges @ 1% on

Add C.P & OH @15% on 156.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 180.11 Rs 180.10

Item Code: 17.72 P/F PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7504 PTMT Towel Ring 215 x 200 x 37 mm Each 1.00 116.00 9999 Carriage of materials and fixing charges L.S. 20.28 1.49 Total: Add water charges @ 1% on 146.22 Add C.P & OH @15% on 147.68 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 169.83 Rs 169.85

Item Code: 17.73.1 P/F PTMT towel rail complete with brackets - concealed fitting arrangement of approved quality and colour. 450MM long towel rail -

Code 7505 09.032 0588 9999 0112 0114

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS : P.T.M.T. towel rail 18\" (450mm) Each Wooden cleates Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3 25 mm CP. brass screws 100 N Carriage of materials L.S. LABOUR Carpenter 2nd class Day Beldar Day

Rate

1.00

192.00

2.00

17.42

6.00 4.16

115.00 1.49

0.17 0.17

273.00 247.00 Total: 293.50

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 296.44 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 375.75 Rs 375.70

Page 795 of 2298

Item Code: 17.73.2 P/F PTMT towel rail complete with brackets - 600mm long towel rail Code 7506 09.032 0588 9999 0112 0114

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS : P.T.M.T. towel rail 24\" (600mm) Each Wooden cleats Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3 25 mm CP. brass screws 100 N Carriage of materials L.S. LABOUR Carpenter 2nd class Day Beldar Day

Rate

1.00

226.00

2.00

17.42

6.00 4.16

115.00 1.49

0.17 0.17

273.00 247.00 Total: 327.50

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 330.78 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 415.24 Rs 415.20

Item Code: 17.74 P/F PTMT shelf 440 mm long, 124 mm width and 36mm height weighing not less than 300gm Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS : 7507 P.T.M.T. shelf Each 1.00 Wooden cleates 09.032 Providing 50x50x50mm 2nd class teak wood plugs fixing in 2.00 CM 1:3 0588 25 mm CP. brass screws 100 N 6.00 9999 Carriage of materials L.S. 4.16 LABOUR 0112 Carpenter 2nd class Day 0.17 0114 Beldar Day 0.17 Add water charges @ 1% except on [A] i.e on

Rate 258.00 17.42 115.00 1.49 273.00 247.00 Total: 359.50

Add C.P & OH @15% except on [A] i.e on 363.10 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 452.41 Rs 452.35

Item Code: 17.75 P/F PTMT 15 mm urinal spreader size 95x69x100 mm with 15 mm BSP thread & shapes weighing not less than 60 grams.

Code 7508 9999

Description MATERIALS : P.T.M.T. Urinal spreader 15 mm Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity Each L.S.

1.00 6.76

Add water charges @ 1% on

DSR-12

Rate 127.00 1.49 Total: 137.07

Page 796 of 2298

Add C.P & OH @15% on 138.44 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 159.21 Rs 159.20

Item Code: 17.76.1 P/F P.T.M.T urinal coak: 15 mm n/s 80mm long,44mm high and 30mm wide with BSP female threads weighing not less than 48 grams. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7858 P.T.M.T. Urinal cock 15mm dia each 1.00 94.00 9999 Carriage of materials and fixing charges L.S. 8.06 1.49 Total: Add water charges @ 1% on 106.01 Add C.P & OH @15% on 107.07 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 123.13 Rs 123.15

Item Code: 17.77.1 P/F M.S holder bat clamps to SCI pipe comprising of M.S. flat brackets made of 50x5 mm flat of specified shape: Total bracket length 580 mm of approved shape and design (For single 100mm dia pipe).

Code

Details of Cost for : 5.00 Nos Unit Quantity

Description

MATERIALS M.S. flats 50x5mm 50x0.58= 2.90m @ 1.97 kg/metre = 5.71 kg. M.S. flats 30x1.6mm 5x0.42 = 2.10m. 0.38kg/metre = 0.80kg. Total = 6.51kg. Add wastage 5% = 0.33kg. Total = 6.86 kg. 1007 M.S.flats 6.86kg. = 0.0686 quintal 2205 Carriage of Steel 0116 Fitter (grade 1) 0103 Blacksmith 2nd class 0114 Beldar Priming coat 5x0.58x0.11 =0.32 5x0.42x0.063 =0.13 13.050.01 Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) Rate as per item no 13.50.1 of SH : Finishing 9999 Sundries P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20 nos. 08.008.01.1 P/F expansion hold fasteners on CC/R.C.C. surface backing i/c drilling necessary holes and

quint tonne Day Day Day

Rate

0.0686 0.0069 0.033 0.049 0.065

4250.00 77.87 301.00 273.00 247.00

0.45

25.83

1.35

1.49

20.00

22.06

Add water charges @ 1% except on [A]+[B] i.e on

Total: 333.47

L.S.

Add C.P & OH @15% except on [A]+[B] i.e on 336.80 Cost for 5.00 Nos

DSR-12

Page 797 of 2298

Rate per Each: Rate as per DSR-12:

Rs 168.03 Rs 168.00

Item Code: 17.77.2 P/F M.S holder bat clamps to SCI pipe comprising of M.S. flat brackets made of 50x5 mm flat of specified shape: Total bracket length 580 mm of approved shape and design (For two 100mm dia pipe).

Code

Details of Cost for : 5.00 Nos Unit Quantity

Description

MATERIALS M.S. flats 50x5mm 50x0.81= 4.05m @ 1.97 kg/ metre = 7.98 kg. M.S. flats 30x1.6mm 5x2x0.42 = 4.20m. O.38kg/metre = 1.60kg. Total = 9.58kg. Add wastage 5% = 0.48kg. Total = 10.06 kg. 1007 M.S.flats 10.06kg. = 0.1006 quintal 2205 Carriage of Steel LABOUR:0116 Fitter (grade 1) 0103 Blacksmith 2nd class 0114 Beldar Priming coat 5x0.81x0.11 =0.45 5x2x0.42x0.063 = 0.26 0.71sqm 13.050.01 Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) 9999 Sundries P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20 nos. 08.008.01.1 P/F expansion hold fasteners on CC/R.C.C. surface backing i/c drilling necessary holes and

quint tonne

Rate

0.1006 0.0101

4250.00 77.87

0.048 0.072 0.096

301.00 273.00 247.00

0.71

25.83

1.98

1.49

20.00

22.06

Add water charges @ 1% except on [A]+[B] i.e on

Total: 489.11

Day Day Day

L.S.

Add C.P & OH @15% except on [A]+[B] i.e on 494.00 Cost for 5.00 Nos Rate per Each: Rate as per DSR-12:

Rs 205.53 Rs 205.50

Item Code: 17.77.3 P/F M.S holder bat clamps to SCI pipe comprising of M.S. flat brackets made of 50x5 mm flat of specified shape: Total bracket length 580 mm of approved shape and design (For three 100mm dia pipe).

Code

Description

Details of Cost for : 5.00 Nos Unit Quantity

Rate

MATERIALS M.S. flats 50x5mm 50x1.04= 5.20m @ 1.97 kg/ metre = 10.24 kg. M.S. flats 30x1.6mm 5x3x0.42 = 6.30m. 0.38kg/metre = 2.39kg. Total = 12.63kg. Add wastage 5% = 0.63kg. Total = 13.26 kg.

DSR-12

Page 798 of 2298

1007 2205

M.S.flats 13.26kg. = 0.1326 quintal Carriage of Steel LABOUR:0116 Fitter (grade 1) 0103 Blacksmith 2nd class 0114 Beldar PRIMING COAT 5xl.04x0.ll =0.57 5x3x0.42x0.063 = 0.40 0.97sqm 13.050.01 Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood) 9999 Sundries P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20 nos. 08.008.01.1 P/F expansion hold fasteners on CC/R.C.C. surface backing i/c drilling necessary holes and

quint tonne

0.1326 0.0133

4250.00 77.87

0.063 0.095 0.126

301.00 273.00 247.00

0.97

25.83

2.60

1.49

20.00

22.06

Add water charges @ 1% except on [A]+[B] i.e on

Total: 644.48

Day Day Day

L.S.

Add C.P & OH @15% except on [A]+[B] i.e on 650.92 Cost for 5.00 Nos Rate per Each: Rate as per DSR-12:

Rs 242.96 Rs 242.90

Item Code: 17.78 P/F white vitreous china extended wall mounting water closet of size 780x370x690 mm and white vitreous china cistern - capacity 3 litre/6 litre Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7072 Wall mounted water closet Nos 1.00 4548.00 7073 Adjustable Vetrious China Cistern with fittings Nos 1.00 2409.60 1875 White plastic seat (solid)with lid C.P.brass hinges and rubber each 1.00 310.00 buffers 9999 Carriage of materials L.S. 9.79 1.49 LABOUR: 0116 Fitter (grade 1) Day 1.00 301.00 0114 Beldar Day 1.00 247.00 0123 Mason (brick layer) 1st class Day 1.00 301.00 Total: Add water charges @ 1% on 8131.19 Add C.P & OH @15% on 8212.50 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 9444.38 Rs 9444.35

Item Code: 17.79 P/F white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal.

Code 7074

DSR-12

Description MATERIALS: White Vetrious China Waterless Urinal

Details of Cost for : 1.00 No. Unit Quantity Nos

1.00

Rate 13208.00

Page 799 of 2298

7075 9999 0116 0114

Cistern with fittings for Waterless Urinal Carriage of materials LABOUR: Fitter (grade 1) Beldar

Nos L.S.

1.00 9.79

3029.60 1.49

Day Day

0.50 0.50

301.00 247.00 Total: 16526.19

Add water charges @ 1% on

Add C.P & OH @15% on 16691.45 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 19195.17 Rs 19178.40

Item Code: 17.80 P/F white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ... Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7076 White Vetrious Urinal (battery based infrared sensor operated Nos 1.00 12592.75 - 610x390x370mm) 9999 Carriage of material L.S. 9.79 1.49 LABOUR: 0116 Fitter (grade 1) Day 0.50 301.00 0114 Beldar Day 0.50 247.00 Total: Add water charges @ 1% on 12881.34 Add C.P & OH @15% on 13010.15 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 14961.67 Rs 14961.65

Item Code: 18.1.1 P/F (PE - AL - PE) composite pressure pipes conforming to IS: 15450 U.V. stablist including all special fittings of composite material with clamps (Internal work -Exposed on walls - 1216 - 16mm OD pipes

Code 8300 8300 9999 0116 0117 0114

Description MATERIALS (A) PE-AL-PE Composit pipe 1216 (16 mm OD) pipe Add 30% for fitting and wastage etc. on (A) Cement, sand and grit LABOUR Fitter Asstt. Fitter Beldar

Details of Cost for : 10.00 m Unit Quantity Metre Metre L.S. Day Day Day

Rate

10.00 3.00 2.73

90.00 90.00 1.49

0.33 0.66 0.66

301.00 273.00 247.00 Total: 1616.60

Add water charges @ 1% on

Add C.P & OH @15% on 1632.77 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 187.77 Rs 187.75

Page 800 of 2298

Item Code: 18.1.2 P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed on wall): 1620 (20 mm O/D) pipe. Details of Cost for : 10.00 m Code Description Unit Quantity Rate Details of cost for 10 metre MATERIALS 8301 (A) PE-AL-PE Composit pipe 1620 (20 mm OD) pipe Metre 13.00 111.00 (including 30% for fitting and wastage etc. on (A)) 9999 Cement;sand and grit. L.S. 2.73 1.49 LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.82 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% on 1933.28 Add C.P & OH @15% on 1952.61 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 224.55 Rs 224.55

Item Code: 18.1.3 P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed on wall): 2025 (25 mm O/D) pipe. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8302 (A) PE-AL-PE Composit pipe 2025 (25 mm OD) Metre 13.00 143.00 Including 30% for fitting and wasteage on (A) 9999 Cement, Sand and grit L.S. 2.73 1.49 LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.98 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% on 2392.96 Add C.P & OH @15% on 2416.89 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 277.94 Rs 277.95

Item Code: 18.1.4 P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed on wall): 2532 (25 mm O/D) pipe. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8303 (A) PE-AL-PE Composit pressure pipe Metre 13.00 193.00 Including 30% for fitting and wastage on (A) 9999 Cement, sand and grit L.S. 4.16 1.49 LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.98 273.00

DSR-12

Page 801 of 2298

0114

Beldar

Day

0.98

Add water charges @ 1% on

247.00 Total: 3124.13

Add C.P & OH @15% on 3155.37 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 362.87 Rs 362.85

Item Code: 18.1.5 P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed on wall): 3240 (40 mm O/D) pipe. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8304 (A) PE-AL-PE Composit pipe 3240 (40 mm OD) Metre 13.00 310.00 Including 30% for fittings and wastage etc on (A) 9999 Cement, sand and grit L.S. 5.33 1.49 LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 1.31 273.00 0114 Beldar Day 1.31 247.00 Total: Add water charges @ 1% on 4818.47 Add C.P & OH @15% on 4866.65 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 559.67 Rs 559.65

Item Code: 18.1.6 P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed on wall): 4050 (50 mm O/D) pipe. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8305 (A) 4050mm PE-AL-PE Composit pressure pipe Metre 13.00 335.00 Including Add 30% for fittings and wastage etc on (A) 9999 Cement, sand and grit L.S. 5.33 1.49 LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 1.31 273.00 0114 Beldar Day 1.31 247.00 Total: Add water charges @ 1% on 5143.47 Add C.P & OH @15% on 5194.90 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 597.41 Rs 597.40

Item Code: 18.2.1 P/F (PE - AL - PE) composite pressure pipes all fittings with clamps (Internal work exposed on wall): (concealed work ) 1620 (20 mm O/D) pipe.

DSR-12

Page 802 of 2298

Code 8300

18.078

0116 0117 0114

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) PE-AL-PE Composit pipe 1216 (16 mm OD) Including 75% for fitting,clamps and wastage etc on (A) Making chases upto 7.5 x 7.5 cm. in walls and making good the same Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. pipe etc. LABOUR Fitter Asstt. Fitter Beldar

Metre

Day Day Day

Rate

17.50

90.00

10.00

64.49

0.33 0.66 0.66

301.00 273.00 247.00 Total: 2017.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 2037.71 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 298.83 Rs 297.95

Item Code: 18.2.2 P/F (PE - AL - PE) composite pressure pipes all fittings with clamps (Internal work exposed on wall): (concealed work ) 1620 (20 mm O/D) pipe. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8301 (A) PE-AL-PE Composit pipe 1620 (20 mm OD) Metre 17.50 111.00 Including Add 75% for fittings, claps and wastage etc on (A)

18.078

0116 0117 0114

Making chases upto 7:5 x 7.5 cm. in walls and making good the same Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. pipe etc. LABOUR Fitter Day Asstt. Fitter Day Beldar Day

10.00

64.49

0.33 0.66 0.66

301.00 273.00 247.00 Total: 2385.03

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 2408.88 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 341.51 Rs 340.60

Item Code: 18.2.3 P/F (PE - AL - PE) composite pressure pipes all fittings with clamps (Internal work exposed on wall): (concealed work ) 2025 (25 mm O/D) pipe. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8302 (A) PE-AL-PE Composit pipe 2025 (25 mm OD) Metre 17.50 143.00 Adding 75 % for fittings clamps and wastage etc on (A) Makings chases upto 7.5 x 7.5 cm. in walls and making good the same

DSR-12

Page 803 of 2298

18.078

0116 0117 0114

Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. pipe etc. LABOUR Fitter Day Asstt.Fitter Day Beldar Day

10.00

64.49

0.33 0.66 0.66

301.00 273.00 247.00 Total: 2945.03

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 2974.48 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 406.56 Rs 405.65

Item Code: 18.2.4 P/F (PE - AL - PE) composite pressure pipes all fittings with clamps (Internal work exposed on wall): (concealed work ) 2532 (32 mm O/D) pipe. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8303 (A) PE-AL-PE Composit pipe 2532 (32 mm OD) Metre 17.50 193.00 Adding 75% for fittings, clamps and wastage etc on (A) Making chases upto 7.5 x 7.5 cm. in walls and making good the same 18.078 Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. 10.00 64.49 pipe etc. LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.66 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% except on [A] i.e on 3820.03 Add C.P & OH @15% except on [A] i.e on 3858.23 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 508.19 Rs 507.30

Item Code: 18.3.1 P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 1216 (16 mm O/D) pipe.

Code 8300

0116 0114 0114 0115

DSR-12

Description MATERIALS (A) PE-AL-PE Composit pipe 1216 (16 mm OD) Including 30% for fittings and wastage etc on (A) LABOUR Fitter Beldar Trenching and refilling etc. Beldar Coolie

Details of Cost for : 10.00 m Unit Quantity Metre

Rate

13.00

90.00

Day Day

0.08 0.16

301.00 247.00

Day Day

0.66 0.66

Add water charges @ 1% on

247.00 247.00 Total: 1559.64

Add C.P & OH @15% on

1575.24

Page 804 of 2298

Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 181.15 Rs 181.15

Item Code: 18.3.2 P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 1620 (20 mm O/D) pipe.

Code 8301

0116 0114 0114 0115

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) PE-AL-PE Composit pipe 1620 (20 mm OD) Including 30% for fitting and wastage etc on (A) LABOUR: Fitter Beldar Trenching and refilling etc. Beldar Coolie

Metre

Rate

13.00

111.00

Day Day

0.08 0.16

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 1832.64

Add water charges @ 1% on

Add C.P & OH @15% on 1850.97 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 212.86 Rs 212.85

Item Code: 18.3.3 P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 2025 (25 mm O/D) pipe.

Code 8302

0116 0114 0114 0115

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) 2025mm PE-AL-PE Composit pipe 2025 (25 mm OD) Pipe Including 30% for fittings and wastage etc on (A) LABOUR Fitter Beldar Trenching and refilling etc. Beldar Coolie

Metre

Rate

13.00

143.00

Day Day

0.08 0.16

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 2248.64

Add water charges @ 1% on

Add C.P & OH @15% on 2271.13 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 261.18 Rs 261.20

Item Code: 18.3.4 P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 2532 (32 mm O/D) pipe.

Code

DSR-12

Description

Details of Cost for : 10.00 m Unit Quantity

Rate

Page 805 of 2298

8303

0116 0114 0114 0115

MATERIALS (A) 2532 mm PE-AL-PE Composit pressure pipe Including 30% for fittings and wastage etc. on (A) LABOUR Fitter Beldar Trenching and refilling etc. Beldar Coolie

Metre

13.00

193.00

Day Day

0.08 0.16

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 2898.64

Add water charges @ 1% on

Add C.P & OH @15% on 2927.63 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 336.68 Rs 336.70

Item Code: 18.3.5 P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 3240 (40 mm O/D) pipe.

Code 8304

0116 0114 0114 0115

Description MATERIALS (A) PE-AL-PE Composit pipe 3240 (40 mm OD) Pipe Including Add 30% for fittings and wastage etc on(A) LABOUR Fitter Beldar Trenching and refilling etc. Beldar Coolie

Details of Cost for : 10.00 m Unit Quantity Metre

Rate

13.00

310.00

Day Day

0.16 0.33

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 4485.71

Add water charges @ 1% on

Add C.P & OH @15% on 4530.57 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 521.02 Rs 521.00

Item Code: 18.3.6 P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 4050 (50 mm O/D) pipe.

Code 8305

0116 0114 0114 0115

Description MATERIALS (A) 4050mm PE-Al-PE Composit pressure pipe Including 30% for fittings and wastage etc on (A) LABOUR Fitter Beldar Trenching and refilling etc. Beldar Coolie

Details of Cost for : 10.00 m Unit Quantity Metre

13.00

335.00

Day Day

0.16 0.33

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 4810.71

Add water charges @ 1% on

DSR-12

Rate

Page 806 of 2298

Add C.P & OH @15% on 4858.82 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 558.76 Rs 558.75

Item Code: 18.4.1 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings, clamps (Internal work - Exposed on wall): PN - 16 Pipe, 16 mm O/D.

Code 8625 9999 0116 0117 0114

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 16mm outer dia Including 30% for fittings and wastage etc on (A) Cement, sand and grit LABOUR Fitter Asstt. Fitter Beldar

Metre

Rate

13.00

32.00

L.S.

2.73

1.49

Day Day Day

0.33 0.66 0.66

301.00 273.00 247.00 Total: 862.60

Add water charges @ 1% on

Add C.P & OH @15% on 871.23 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 100.19 Rs 100.20

Item Code: 18.4.2 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings, clamps (Internal work - Exposed on wall): PN - 16 Pipe, 20 mm O/D.

Code 8626 9999 0116 0117 0114

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 20 mm outer dia Including 30% for fittingsand wastage etc on (A) Cement, sand and grit LABOUR Fitter Asstt. Fitter Beldar

Metre

Rate

13.00

50.00

L.S.

2.73

1.49

Day Day Day

0.33 0.82 0.66

301.00 273.00 247.00 Total: 1140.28

Add water charges @ 1% on

Add C.P & OH @15% on 1151.68 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 132.44 Rs 132.45

Item Code: 18.4.3 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings, clamps (Internal work - Exposed on wall): PN - 16 Pipe, 25 mm O/D. Details of Cost for : 10.00 m

DSR-12

Page 807 of 2298

Code 8627 9999 0116 0117 0114

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 25 mm outer dia. Including 30% for fitting and wastage etc on (A) Cement, sand and grit LABOUR Fitter Asstt. Fitter Beldar

Unit

Quantity

Rate

13.00

76.00

L.S.

2.73

1.49

Day Day Day

0.33 0.98 0.66

301.00 273.00 247.00 Total: 1521.96

Metre

Add water charges @ 1% on

Add C.P & OH @15% on 1537.18 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 176.78 Rs 176.80

Item Code: 18.4.4 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings, clamps (Internal work - Exposed on wall): PN - 16 Pipe, 32 mm O/D.

Code 8628 9999 0116 0117 0114

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 32 mm outer dia. Including 30% for fitting and wastage etc on (A) Cement, sand and grit LABOUR Fitter Asstt. Fitter Beldar

Metre

Rate

13.00

124.00

L.S.

4.16

1.49

Day Day Day

0.33 0.98 0.98

301.00 273.00 247.00 Total: 2227.13

Add water charges @ 1% on

Add C.P & OH @15% on 2249.40 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 258.68 Rs 258.70

Item Code: 18.4.5 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings, clamps (Internal work - Exposed on wall): PN - 16 Pipe, 40 mm O/D.

Code 8629 9999 0116 0117 0114

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 40 mm outer dia Including 30% fittings wastage etc on (A) Cement sand and grit LABOUR Fitter Asstt. Fitter Beldar

Details of Cost for : 10.00 m Unit Quantity Metre

13.00

196.00

L.S.

5.33

1.49

Day Day Day

0.33 1.31 1.31

301.00 273.00 247.00 Total: 3336.47

Add water charges @ 1% on

DSR-12

Rate

Page 808 of 2298

Add C.P & OH @15% on 3369.83 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 387.53 Rs 387.55

Item Code: 18.4.6 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings, clamps (Internal work - Exposed on wall): PN - 16 Pipe, 50 mm O/D.

Code 8630 9999 0116 0117 0114

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 50 mm outer dia Including 30% for fittings and wastage etc on (A) Cement, sandand grit LABOUR Fitter Asstt. Fitter Beldar

Metre

Rate

13.00

286.00

L.S.

5.33

1.49

Day Day Day

0.33 1.31 1.31

301.00 273.00 247.00 Total: 4506.47

Add water charges @ 1% on

Add C.P & OH @15% on 4551.53 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 523.43 Rs 523.45

Item Code: 18.5.1 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP- R plain and brass threaded polypropylene random fittings, clamps : PN - 16 Pipe, 16 mm O/D. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8625 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 16 mm outer dia Metre 17.50 32.00 Including 75% for fitting clamps and wastage etc on (A) Making chases upto 7.5 x 7.5 cm. in walls and making good the same 18.078 Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. 10.00 64.49 pipe etc. LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.66 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% except on [A] i.e on 1002.53 Add C.P & OH @15% except on [A] i.e on 1012.56 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 180.93 Rs 180.05

Item Code: 18.5.2 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP- R plain and brass threaded polypropylene random fittings, clamps : PN - 16 Pipe, 20 mm O/D.

DSR-12

Page 809 of 2298

Code 8626

18.078

0116 0117 0114

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 20 mm outer dia Add 75% for fitting, clamps and wastage etc on (A) Making chase upto 7.5 x 7.5 cm. in walls and making good the same Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. pipe etc. LABOUR Fitter Asstt. Fitter Beldar

Metre

Day Day Day

Rate

17.50

50.00

10.00

64.49

0.33 0.66 0.66

301.00 273.00 247.00 Total: 1317.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1330.71 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 217.52 Rs 216.65

Item Code: 18.5.3 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP- R plain and brass threaded polypropylene random fittings, clamps :PN - 16 Pipe, 25 mm O/D. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8627 (A) 3 layer PP-R pipe (PN-16/SPR 7.4) 25 mm quter dia Metre 17.50 76.00 Including 75 % for fittings clamps and wastage etc on(A) Making chases upto 7.5 x 7.5 cm! in walls and making good the same 18.078 Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. 10.00 64.49 pipe etc. LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.66 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% except on [A] i.e on 1772.53 Add C.P & OH @15% except on [A] i.e on 1790.26 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 270.37 Rs 269.50

Item Code: 18.5.4 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 U.V. stablized and anti-microbial fusion welded, i/c all PP- R plain and brass threaded polypropylene random fittings, clamps at one meter spacing. i/c cutting chases and making the same.:

Code 8628

DSR-12

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 32 mm outer dia Add 75 % for fittings clamps and wastage etc on(A)

Details of Cost for : 10.00 m Unit Quantity Metre

17.50

Rate 124.00

Page 810 of 2298

18.078

0116 0117 0114

Making haseiupto 7.5 x 7.5 cm. in walls and making good the same Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. pipe etc. LABOUR Fitter Day Asstt. Fitter Day Beldar Day

10.00

64.49

0.33 0.66 0.66

301.00 273.00 247.00 Total: 2612.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 2638.66 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 367.94 Rs 367.05

Item Code: 18.6.1 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes UV stablized and anti-micro- bial fusion welded, i/c all PP-R plain and brass threaded polypropylene random fittings, including trenchin, refilling & testing (External work): PN - 16 Pipe, 15 mm O

Code 8625

0116 0114 0114 0115

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 16 mm outer dia Including 30% for fittings and wastage etc on (A) LABOUR Fitter Beldar Trenching and refilling etc. Beldar Coolie

Metre

Rate

13.00

32.00

Day Day

0.08 0.16

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 805.64

Add water charges @ 1% on

Add C.P & OH @15% on 813.70 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 93.58 Rs 93.60

Item Code: 18.6.2 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN - 16 Pipe, 20 mm OD (SDR-7.4). Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8626 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 20 mm outer dia Metre 13.00 50.00 Including 30 % for fittings and wastage etc on (A) LABOUR 0116 Fitter Day 0.08 301.00 0114 Beldar Day 0.16 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00 0115 Coolie Day 0.66 247.00 Total: Add water charges @ 1% on 1039.64

DSR-12

Page 811 of 2298

Add C.P & OH @15% on 1050.04 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 120.76 Rs 120.75

Item Code: 18.6.3 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 25 mm OD (SDR-7.4). Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8627 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 25 mm outer dia Metre 13.00 76.00 Including 30% for fitting and wastage etc on (A) LABOUR 0116 Fitter Day 0.12 301.00 0114 Beldar Day 0.25 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00 0115 Coolie Day 0.66 247.00 Total: Add water charges @ 1% on 1411.91 Add C.P & OH @15% on 1426.03 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 163.99 Rs 164.00

Item Code: 18.6.4 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN - 16 Pipe, 32 mm OD (SDR-7.4). Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8628 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 32 mm (inc 30% for Metre 13.00 124.00 fitting and wastage etc) LABOUR 0116 Fitter Day 0.12 301.00 0114 Beldar Day 0.25 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00 0115 Coolie Day 0.66 247.00 Total: Add water charges @ 1% on 2035.91 Add C.P & OH @15% on 2056.27 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 236.47 Rs 236.45

Item Code: 18.6.5 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 40 mm OD (SDR-7.4). Details of Cost for : 10.00 m

DSR-12

Page 812 of 2298

Code 8629

0116 0114 0114 0115

Description MATERIALS (A) 3 1ayer PP-R pipe(PN-16/SDR7.4) 40mm outer dia Including 30% for fitting and wastage etc on (A) LABOUR Fitter Beldar Trenching and refilling etc. Beldar Coolie

Unit

Quantity

Rate

13.00

196.00

Day Day

0.16 0.33

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 3003.71

Metre

Add water charges @ 1% on

Add C.P & OH @15% on 3033.75 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 348.88 Rs 348.90

Item Code: 18.6.6 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 50 mm OD (SDR-7.4). Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8630 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 50 mm quter dia Metre 13.00 286.00 including 30% for fitting and wastage etc on (A) LABOUR 0116 Fitter Day 0.16 301.00 0114 Beldar Day 0.33 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00 0115 Coolie Day 0.66 247.00 Total: Add water charges @ 1% on 4173.71 Add C.P & OH @15% on 4215.45 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 484.78 Rs 484.80

Item Code: 18.6.7 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 63 mm OD (SDR-7.4). Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8631 (A) 3 layer PP-R pipe (PN-16/SPR 7.4) 63 mm outer dia Metre 13.00 445.00 including 30% for fitting and wastage etc on (A) LABOUR 0116 Fitter Day 0.25 301.00 0114 Beldar Day 0.66 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00 0115 Coolie Day 0.66 247.00 Total: Add water charges @ 1% on 6349.31

DSR-12

Page 813 of 2298

Add C.P & OH @15% on 6412.80 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 737.47 Rs 737.45

Item Code: 18.6.8 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes UV stablized and anti-micro- bial fusion welded, i/c all PP-R plain and brass threaded polypropylene random fittings, including trenchin, refilling & testing (External work): PN - 16 Pipe, 75 mm O

Code 8632

0116 0114 0114 0115

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 75 mm outer dia including 30% for fitting and wastage etc on (A) LABOUR Fitter Beldar Trenching and refilling etc. Beldar Coolie

Metre

Rate

13.00

640.00

Day Day

0.25 0.66

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 8884.31

Add water charges @ 1% on

Add C.P & OH @15% on 8973.15 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1031.91 Rs 1031.90

Item Code: 18.6.9 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 90 mm OD (SDR-7.4). Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8633 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 90 mm outer dia Metre 13.00 1020.00 Including 30% for fitting and wastage etc on (A) LABOUR 0116 Fitter Day 0.37 301.00 0114 Beldar Day 0.97 247.00 Trenching and refilling etc. 0114 Beldar Day 0.80 247.00 0115 Coolie Day 0.80 247.00 Total: Add water charges @ 1% on 14006.16 Add C.P & OH @15% on 14146.22 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1626.82 Rs 1626.80

Item Code: 18.6.10

DSR-12

Page 814 of 2298

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 10 Pipe, 110 mm OD (SDR-11). Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8634 (A) 3 layer PP-R pipe (PN-16/SDR 7.4)110 mm outer dia Metre 13.00 1070.00 including 30% for fitting and wastage etc LABOUR 0116 Fitter Day 0.37 301.00 0114 Beldar Day 0.97 247.00 Trenching and refilling etc. 0114 Beldar Day 0.80 247.00 0115 Coolie Day 0.80 247.00 Total: Add water charges @ 1% on 14656.16 Add C.P & OH @15% on 14802.72 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1702.31 Rs 1702.30

Item Code: 18.6.11 P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes UV stablized and anti-micro- bial fusion welded, i/c all PP-R plain and brass threaded polypropylene random fittings, including trenchin, refilling & testing (External work): PN - 10 Pipe, 160 mm

Code 8635

0116 0114 0114 0115

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS (A) 3 layer PP-R pipe (PN-16/SDR7.4) 160 mm outer dia Including 30% for fitting and wastage etc LABOUR Fitter Beldar Trenching and refilling etc. Beldar Coolie

Metre

Rate

13.00

2255.00

Day Day

0.58 1.54

301.00 247.00

Day Day

1.20 1.20

247.00 247.00 Total: 30462.76

Add water charges @ 1% on

Add C.P & OH @15% on 30767.39 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3538.25 Rs 3538.25

Item Code: 18.7.1 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 15 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS: 8636 Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia. metre 13.00 51.00

9999

DSR-12

(Adding 30% for fittings and wastage) Cement, sand and grit etc. LABOUR:

L.S.

2.73

1.49

Page 815 of 2298

0116 0117 0114

Fitter grade-I Assistant Fitter or II class Fitter Beldar

Day Day Day

0.33 0.82 0.66

Add water charges @ 1% on

301.00 273.00 247.00 Total: 1153.28

Add C.P & OH @15% on 1164.81 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 133.95 Rs 133.95

Item Code: 18.7.2 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 20 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS: 8637 Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia. metre 13.00 63.00

9999 0116 0117 0114

(Adding 30% for fitings wastage) Cement, sand and grit etc. LABOUR: Fitter grade-I Assistant Fitter or II class Fitter Beldar

L.S.

2.73

1.49

Day Day Day

0.33 0.98 0.66

301.00 273.00 247.00 Total: 1352.96

Add water charges @ 1% on

Add C.P & OH @15% on 1366.49 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 157.15 Rs 157.15

Item Code: 18.7.3 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 25 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS: 8638 Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia. metre 13.00 90.00

9999 0116 0117 0114

(Adding 30% forfittings and wastage) Cement, sand and grit etc. LABOUR: Fitter grade-I Assistant Fitter or II class Fitter Beldar

L.S.

2.73

1.49

Day Day Day

0.33 0.98 0.66

301.00 273.00 247.00 Total: 1703.96

Add water charges @ 1% on

Add C.P & OH @15% on 1721.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 197.92 Rs 197.90

Page 816 of 2298

Item Code: 18.7.4 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 32 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8639 (A) 32mm outer dia CPVC pipe metre 13.00 120.00 Add 30% for fitting and wastage etc on (A) 9999 Cement, sanaand gritetcai L.S. 4.16 1.49 LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.98 273.00 0114 Beldar Day 0.98 247.00 Total: Add water charges @ 1% on 2175.13 Add C.P & OH @15% on 2196.88 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 252.64 Rs 252.65

Item Code: 18.7.5 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 40 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8640 (A) 40 mm outer dia CPVC Pipe metre 13.00 170.00 Add 30% for fitting and wastage etc on (A) 9999 Cement, sand & grit L.S. 5.33 1.49 LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 1.31 273.00 0114 Beldar Day 1.31 247.00 Total: Add water charges @ 1% on 2998.47 Add C.P & OH @15% on 3028.45 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 348.27 Rs 348.25

Item Code: 18.7.6 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 50 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS: 8641 Chlorinated Polyvinyl - Chloride (CPVC) pipe 50 mm outer dia. metre 9999 0116

DSR-12

(30% added for fittings and wastage etc) Cement, sand and grit etc LABOUR: Fitter grade-I

13.00

280.00

L.S.

5.33

1.49

Day

0.33

301.00

Page 817 of 2298

0117 0114

Assistant Fitter or II class Fitter Beldar

Day Day

1.31 1.31

Add water charges @ 1% on

273.00 247.00 Total: 4428.47

Add C.P & OH @15% on 4472.75 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 514.37 Rs 514.35

Item Code: 18.8.1 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 15 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8636 (A) 15 mmouter dia CPVC Pipe metre 17.50 51.00 Add 75% for fitting and wastage etc on (A) Making chases upto 7.5x7.5 cm.in walls and making good the same 18.078 Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. 10.00 64.49 pipe etc. LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.66 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% except on [A] i.e on 1335.03 Add C.P & OH @15% except on [A] i.e on 1348.38 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 219.55 Rs 218.65

Item Code: 18.8.2 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 20 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8637 (A) 20 mm outerdia CPVC pipe metre 17.50 63.00 Add 75% for fitting and wastage etc on (A) Making chases upto 7.5x7.5 cm in walls and making good the same 18.078 Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. 10.00 64.49 pipe etc. LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.66 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% except on [A] i.e on 1545.03 Add C.P & OH @15% except on [A] i.e on 1560.48 Cost for 10.00 m

DSR-12

Page 818 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 243.95 Rs 243.05

Item Code: 18.8.3 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 25 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8638 (A) 25 mm outerdia CPVC metre 17.50 90.00 Add 75% for fitting and wastage etc on (A) Making chases upto 7.5x7.5 cm in walls and making good the same 18.078 Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. 10.00 64.49 pipe etc. LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.66 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% except on [A] i.e on 2017.53 Add C.P & OH @15% except on [A] i.e on 2037.71 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 298.83 Rs 297.95

Item Code: 18.8.4 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 32 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8639 (A) 32 mm outer dia CPVC pipe metre 17.50 120.00 Add 75% for fillings clamps, wastage etc. on (A) Making chases upto 7.5 7.5 cm in walls and making good the same 18.078 Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. 10.00 64.49 pipe etc. LABOUR 0116 Fitter Day 0.33 301.00 0117 Asstt. Fitter Day 0.66 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% except on [A] i.e on 2542.53 Add C.P & OH @15% except on [A] i.e on 2567.96 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 359.81 Rs 358.90

Item Code: 18.9.1 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External work 15 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m

DSR-12

Page 819 of 2298

Code 8636

0116 0114 0114 0115

Description MATERIALS (A) 15 mm outer dia CPVC pipe Add 30% for fillings and wastage etc. on (A) LABOUR Fitter Belder Trenching and refilling etc. Beldar Coolie

Unit

Quantity

Rate

13.00

51.00

Day Day

0.08 0.16

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 1052.64

metre

Add water charges @ 1% on

Add C.P & OH @15% on 1063.17 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 122.27 Rs 122.25

Item Code: 18.9.2 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External work 20 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS: 8637 Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia.

0116

0114 0114

0115

Fitter grade-I (30% added for fittings and wastage etc.,) LABOUR: Beldar Beldar Trenching and refilling etc. Coolie

metre Day

13.00 0.08

63.00 301.00

Day Day

0.16 0.66

247.00 247.00

Day

0.66

247.00 Total: 1208.64

Add water charges @ 1% on

Add C.P & OH @15% on 1220.73 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 140.38 Rs 140.40

Item Code: 18.9.3 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External work 25 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8638 (A) 25 mm nominal outer dia CPVC pipe metre 13.00 90.00 Add 30% for fillings and wastage etc. on (A) LABOUR 0116 Fitter Day 0.12 301.00 0114 Beldar Day 0.25 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00

DSR-12

Page 820 of 2298

0115

Coolie

Day

0.66

Add water charges @ 1% on

247.00 Total: 1593.91

Add C.P & OH @15% on 1609.85 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 185.13 Rs 185.15

Item Code: 18.9.4 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External work 32 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8639 (A) 32 mm outer dia CPVC pipe metre 13.00 120.00 Add 30% for fillings and wastage etc. on (A) LABOUR 0116 Fitter Day 0.12 301.00 0114 Beldar Day 0.25 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00 0115 Coolie Day 0.66 247.00 Total: Add water charges @ 1% on 1983.91 Add C.P & OH @15% on 2003.75 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 230.43 Rs 230.45

Item Code: 18.9.5 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External work 40 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8640 (A) 40mm outer dia CPVC pipe metre 13.00 170.00 Add 30% for fillings and wastage etc. on (A) LABOUR 0116 Fitter Day 0.16 301.00 0114 Beldar Day 0.33 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00 0115 Coolie Day 0.66 247.00 Total: Add water charges @ 1% on 2665.71 Add C.P & OH @15% on 2692.37 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 309.62 Rs 309.60

Item Code: 18.9.6

DSR-12

Page 821 of 2298

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External work 50 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8641 (A) 50mm outer dia CPVC pipe metre 13.00 280.00 Add 30% for fillings and wastage etc. on (A) LABOUR 0116 Fitter Day 0.16 301.00 0114 Beldar Day 0.33 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00 0115 Coolie Day 0.66 247.00 Total: Add water charges @ 1% on 4095.71 Add C.P & OH @15% on 4136.67 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 475.72 Rs 475.70

Item Code: 18.9.7 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External work 62.50 mm nominal outer dia .Pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8642 (A) Chlorinated polyvinyl- chloride (CPVC) pipe metre 13.00 835.00 62.5 mm inner dia. Add 30% for fillings and wastage etc. on (A) LABOUR 0116 Fitter Day 0.25 301.00 0114 Beldar Day 0.66 247.00 Trenching and refilling etc. 0114 Beldar Day 0.66 247.00 0115 Coolie Day 0.66 247.00 Total: Add water charges @ 1% on 11419.31 Add C.P & OH @15% on 11533.50 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1326.35 Rs 1326.35

Item Code: 18.9.8 P/F CPVC pipes, having thermal stability for hot and cold water supply i/c CPVC plain & brass threaded fittings i/c trenching, refilling: (External wak): 75 mm nominal OD pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8643 (A) Chlorinated polyvinyl- chloride (CPVC) pipe 75 mm inner metre 13.00 1185.00 dia. (Qty Including 30% for fillings and wastage etc.) LABOUR 0116 Fitter Day 0.25 301.00 0114 Beldar Day 0.66 247.00

DSR-12

Page 822 of 2298

0114 0115

Trenching and refilling etc. Beldar Coolie

Day Day

0.66 0.66

Add water charges @ 1% on

247.00 247.00 Total: 15969.31

Add C.P & OH @15% on 16129.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1854.84 Rs 1854.85

Item Code: 18.9.9 P/F CPVC pipes, having thermal stability for hot and cold water supply i/c CPVC plain & brass threaded fittings i/c trenching, refilling: (External wak): 100 mm nominal OD pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8644 (A) Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner metre 13.00 1640.00 dia. (Qty Including 30% for fillings and wastage etc.) LABOUR 0116 Fitter Day 0.37 301.00 0114 Beldar Day 0.97 247.00 Trenching and refilling etc. 0114 Beldar Day 0.80 247.00 0115 Coolie Day 0.80 247.00 Total: Add water charges @ 1% on 22066.16 Add C.P & OH @15% on 22286.82 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2562.98 Rs 2563.00

Item Code: 18.9.10 P/F CPVC pipes, having thermal stability for hot and cold water supply i/c CPVC plain & brass threaded fittings i/c trenching, refilling: (External wak): 150 mm nominal OD pipes. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 8645 (A) Chlorinated Polyvinyl-chloride (CPVC) pipe 150 mm inner metre 13.00 2870.00 dia. (Qty Including 30% for fillings and wastage etc.) LABOUR 0116 Fitter Day 0.58 301.00 0114 Beldar Day 1.54 247.00 Trenching and refilling etc. 0114 Beldar Day 1.20 247.00 0115 Coolie Day 1.20 247.00 Total: Add water charges @ 1% on 38457.76 Add C.P & OH @15% on 38842.34 Cost for 10.00 m Rate per One Metre:

DSR-12

Rs 4466.87

Page 823 of 2298

Rate as per DSR-12:

Rs 4466.85

Item Code: 18.10.1 P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 15 mm dia. nominal bore Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS : 1545 15mm dia GI pipes (Medium) metre 11.50 2271 Carriage of pipes (G.I pipes) tonne 0.0141 (approx weight of 10m GI pipe =12.30kg Added 15% for fittings and wastage on above items) 9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116 0117 0114

LABOUR : Fitter grade-I Assistant Fitter or II class Fitter Beldar

Rate 81.00 77.87

L.S.

8.06

1.49

L.S.

2.73

1.49

Day Day Day

0.33 0.66 0.66

301.00 273.00 247.00 Total: 1391.21

Add water charges @ 1% on

Add C.P & OH @15% on 1405.12 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 161.59 Rs 161.60

Item Code: 18.10.2 P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 20 mm dia. nominal bore Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: 1546 20mm dia GI pipes metre 11.50 2271 Carriage of pipes (G.I pipes) tonne 0.0183 (approx weight of 10m GI pipe =15.90kg Added 15% for fittings and wastage on above items) 9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116 0117 0114

LABOUR: Fitter grade-I Assistant Fitter or II class Fitter Beldar

Rate 97.00 77.87

L.S.

8.06

1.49

L.S.

2.73

1.49

Day Day Day

0.33 0.82 0.66

301.00 273.00 247.00 Total: 1619.22

Add water charges @ 1% on

Add C.P & OH @15% on 1635.41 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 188.07 Rs 188.05

Item Code: 18.10.3

DSR-12

Page 824 of 2298

P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 25 mm dia. nominal bore Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS : 1547 25mm dia GI pipes metre 11.50 2271 Carriage of pipes (G.I pipes) tonne 0.0283 (approx weight of 10m GI pipe =24.60kg Added 15% for fittings and wastage on above items) 9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116 0117 0114

LABOUR: Fitter grade-I Assistant Fitter or II class Fitter Beldar

Rate 134.00 77.87

L.S.

9.49

1.49

L.S.

4.16

1.49

Day Day Day

0.33 0.98 0.66

301.00 273.00 247.00 Total: 2093.43

Add water charges @ 1% on

Add C.P & OH @15% on 2114.36 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 243.15 Rs 243.15

Item Code: 18.10.4 P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 32 mm dia. nominal bore Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: 1548 32mm dia GI pipes metre 11.50 2271 Carriage of pipes (G.I pipes) tonne 0.0365 (approx weight of 10m GI pipe =31.70kg Added 15% for fittings and wastage on above items) 9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116 0117 0114

LABOUR: Fitter grade-I Assistant Fitter or II class Fitter Beldar

Rate 167.00 77.87

L.S.

9.49

1.49

L.S.

4.16

1.49

Day Day Day

0.33 0.98 0.98

301.00 273.00 247.00 Total: 2552.61

Add water charges @ 1% on

Add C.P & OH @15% on 2578.14 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 296.49 Rs 296.50

Item Code: 18.10.5 P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 40 mm dia. nominal bore Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS :

DSR-12

Rate

Page 825 of 2298

1549 2271

40mm dia GI pipes Carriage of pipes (G.I pipes) (approx weight of 10m GI pipe =36.50kg Added 15% for fittings and wastage on above items)

9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116 0117 0114

LABOUR : Fitter grade-I Assistant Fitter or II class Fitter Beldar

metre tonne

11.50 0.042

202.00 77.87

L.S.

13.52

1.49

L.S.

5.33

1.49

Day Day Day

0.33 1.31 1.31

301.00 273.00 247.00 Total: 3134.88

Add water charges @ 1% on

Add C.P & OH @15% on 3166.23 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 364.12 Rs 364.10

Item Code: 18.10.6 P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 50 mm dia. nominal bore Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS : 1550 GI pipes- 50mm dia metre 11.50 2271 Carriage of pipes (G.I pipes) tonne 0.0595 (approx weight of 10m GI pipe =51.70kg Added 15% for fittings and wastage on above items) 9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116 0117 0114

LABOUR: Fitter grade-I Assistant Fitter or II class Fitter Beldar

Rate 254.00 77.87

L.S.

13.52

1.49

L.S.

5.33

1.49

Day Day Day

0.33 1.64 1.64

301.00 273.00 247.00 Total: 3905.84

Add water charges @ 1% on

Add C.P & OH @15% on 3944.90 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 453.66 Rs 453.65

Item Code: 18.11.1 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 1545 (A) 15 mm dia G.I. Pipe metre 11.50 81.00 2271 (B) Carriage of pipe approx weight of 10m = 12.30 kg tonne 0.0141 77.87 Added 15% for fittings and wastage inf (A & B)

DSR-12

Page 826 of 2298

9999

18.040.01

18.078

0116 0117 0114

White lead, hemp, oil etc. Painting G.I. pipe with anti-corrosive bitumastic paint two or more coats Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 15 mm diameter p Making chases upto 7.5x7.5cm in walls and making good the same Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. pipe etc. LABOUR :Fitter Asstt. fitter Beldar

L.S.

Day Day Day

8.06

1.49

10.00

4.39

10.00

64.49

0.33 0.66 0.66

301.00 273.00 247.00 Total: 1387.14

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 1401.01 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 230.00 Rs 229.10

Item Code: 18.11.2 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia nominal bore Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 1546 (A) 20 mm dia G.I. Pipe metre 11.50 97.00 2271 (B) Carriage of pipe approx weight of 10m = 12.30 kg tonne 0.0141 77.87 Added 15% for fittings and wastage inf (A & B) 9999 White lead, hemp, oil etc. L.S. 8.06 1.49 Painting G.I. pipe with anti-corrosive bitumastic paint two or more coats 18.040.02 Painting G.I. pipes with two coats of anti-corrosive bitumastic m 10.00 5.16 paint - : 20mm diameter pi Making chases upto 7.5x7.5cm in walls and making good the same 18.078 Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. 10.00 64.49 pipe etc. LABOUR :0116 Fitter Day 0.33 301.00 0117 Asstt. fitter Day 0.66 273.00 0114 Beldar Day 0.66 247.00 Total: Add water charges @ 1% except on [A]+[B] i.e on 1571.14 Add C.P & OH @15% except on [A]+[B] i.e on 1586.85 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 252.14 Rs 251.30

Item Code: 18.12.1 P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia. nominal bore

Code

DSR-12

Description

Details of Cost for : 10.00 m Unit Quantity

Rate

Page 827 of 2298

1545 2271

MATERIALS : 15mm dia GI pipes (Medium) metre Carriage of pipes (G.I pipes) tonne (approx weight of 10m pipe = 12.30 kg Added 20% for fittings and wastage on material and carriage)

10.20 0.0125

81.00 77.87

9999

White lead, hemp, oil etc. L.S.

5.33

1.49

0116 0114

LABOUR: Fitter grade-I Beldar Trenching and refilling etc.

Day Day

0.08 0.16

301.00 247.00

0114 0115

Beldar Coolie

Day Day

0.66 0.66

247.00 247.00 Total: 1224.75

Add water charges @ 1% on

Add C.P & OH @15% on 1237.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 142.26 Rs 142.25

Item Code: 18.12.2 P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia. nominal bore

Code 1546 2271

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS : 20mm dia GI pipes Carriage of pipes (G.I pipes) (approx weight of 10m pipe = 15.90 kg Added 2% for fittings and wastage on material and carriage)

metre tonne

Rate

10.20 0.0162

97.00 77.87

9999

White lead, hemp, oil etc. L.S.

5.33

1.49

0116 0114

LABOUR : Fitter grade-I Beldar Trenching and refilling etc.

Day Day

0.08 0.16

301.00 247.00

0114 0115

Beldar Coolie

Day Day

0.66 0.66

247.00 247.00 Total: 1388.24

Add water charges @ 1% on

Add C.P & OH @15% on 1402.12 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 161.24 Rs 161.25

Item Code: 18.12.3 P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia. nominal bore

DSR-12

Page 828 of 2298

Code 1547 2271

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS : 25mm dia GI pipes Carriage of pipes (G.I pipes) (approx weight of 10m pipe = 24.60 kg Added 2% for fittings and wastage on material and carriage)

metre tonne

Rate

10.20 0.0251

134.00 77.87

9999

White lead, hemp, oil etc. L.S.

6.76

1.49

0116 0114

LABOUR : Fitter grade-I Beldar Trenching and refilling etc.

Day Day

0.12 0.25

301.00 247.00

0114 0115

Beldar Coolie

Day Day

0.66 0.66

247.00 247.00 Total: 1802.73

Add water charges @ 1% on

Add C.P & OH @15% on 1820.76 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 209.39 Rs 209.40

Item Code: 18.12.4 P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 32 mm dia. nominal bore

Code 1548 2271

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS : 32mm dia GI pipes Carriage of pipes (G.I pipes) (approx weight of 10m pipe = 31.70 kg Added 2% for fittings and wastage on material and carriage)

metre tonne

Rate

10.20 0.0323

167.00 77.87

9999

White lead, hemp, oil etc. L.S.

6.76

1.49

0116 0114

LABOUR: Fitter grade-I Beldar Trenching and refilling etc.

Day Day

0.12 0.25

301.00 247.00

0114 0115

Beldar Coolie

Day Day

0.66 0.66

247.00 247.00 Total: 2139.90

Add water charges @ 1% on

Add C.P & OH @15% on 2161.30 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 248.55 Rs 248.55

Item Code: 18.12.5

DSR-12

Page 829 of 2298

P/F G.I. pipes with G.I. fittings including trenching and refilling etc. External work 40 mm dia. nominal bore

Code 1549 2271

9999

0116 0114

0114 0115

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS : 40mm dia GI pipes Carriage of pipes (G.I pipes) approx weight of 100m pipe = 365 kg (Added 2% for fittings and wastage for above items) White lead, hemp, oil etc. LABOUR : LABOUR: Fitter grade-I Beldar Trenching and refilling

metre tonne

Beldar Coolie

Rate

10.20 0.03723

202.00 77.87

L.S.

9.49

1.49

Day Day

0.16 0.33

301.00 247.00

Day Day

0.66 0.66

247.00 247.00 Total: 2533.15

Add water charges @ 1% on

Add C.P & OH @15% on 2558.48 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 294.23 Rs 294.20

Item Code: 18.12.6 P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50mm dia. nominal bore

Code 1550 2271

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS : GI pipes- 50mm dia Carriage of pipes (G.I pipes) (approx weight of 10m pipe = 51.70 kg Added 2% for fittings and wastage on material and carriage)

metre tonne

Rate

10.20 0.0527

254.00 77.87

9999

White lead, hemp, oil etc. L.S.

9.49

1.49

0116 0114

LABOUR: Fitter grade-I Beldar Trenching and refilling etc.

Day Day

0.16 0.33

301.00 247.00

0114 0115

Beldar Coolie

Day Day

0.66 0.66

247.00 247.00 Total: 3064.75

Add water charges @ 1% on

Add C.P & OH @15% on 3095.40 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 355.97 Rs 355.95

Item Code: 18.12.7

DSR-12

Page 830 of 2298

P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 65mm dia. nominal bore

Code 1551 2271

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS: G.I. pipes 65 mm dia Carriage of pipes (G.I pipes) (approx weight of 10m pipe = 66.30 kg Added 2% for fittings and wastage on material and carriage)

metre tonne

Rate

10.20 0.0676

325.00 77.87

9999

White lead, hemp, oil etc. L.S.

13.52

1.49

0116 0114

LABOUR: Fitter grade-I Beldar Trenching and refilling etc.

Day Day

0.25 0.66

301.00 247.00

0114 0115

Beldar Coolie

Day Day

0.66 0.66

247.00 247.00 Total: 3904.71

Add water charges @ 1% on

Add C.P & OH @15% on 3943.76 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 453.53 Rs 453.55

Item Code: 18.12.8 P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80mm dia. nominal bore

Code 1552 2271

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS: G.I. pipes 80mm dia Carriage of pipes (G.I pipes) (approx weight of 10m pipe = 86.40 kg Added 2% for fittings and wastage on material and carriage)

metre tonne

Rate

10.20 0.0881

426.00 77.87

9999

White lead, hemp, oil etc. L.S.

13.52

1.49

0116 0114

LABOUR: Fitter grade-I Beldar Trenching and refilling etc.

Day Day

0.25 0.66

301.00 247.00

0114 0115

Beldar Coolie

Day Day

0.66 0.66

247.00 247.00 Total: 4936.51

Add water charges @ 1% on

Add C.P & OH @15% on 4985.88 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 573.38 Rs 573.40

Page 831 of 2298

Item Code: 18.13.1 Making connection of G.I. distribution branch complete : 25 to 40 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1608 G.I. tees (equal) 25 mm each 1.00 1555 G.I. back (jam) nuts 25 mm dia each 1.00 9999 Carriage of materials and sundries L.S. 5.33 LABOUR: 0116 Fitter grade-I Day 0.33 0114 Beldar Day 0.33 Add water charges @ 1% on

Rate 42.00 8.00 1.49 301.00 247.00 Total: 238.78

Add C.P & OH @15% on 241.17 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 277.35 Rs 277.35

Item Code: 18.13.2 Making connection of G.I. distribution branch complete : 50 to 80 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1612 G.I. tees (equal) 65 mm each 1.00 1559 G.I. back (jam) nuts 65 mm dia each 1.00 9999 Carriage of materials and sundries L.S. 5.33 LABOUR : 0116 Fitter grade-I Day 0.45 0114 Beldar Day 0.45 Add water charges @ 1% on

Rate 270.00 18.00 1.49 301.00 247.00 Total: 542.54

Add C.P & OH @15% on 547.97 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 630.17 Rs 630.15

Item Code: 18.14 Fixing water meter and stop cock in G.I. pipe line......complete (cost of water meter and stop cock to be paid separately).

Code

Description

1555 9999

MATERIALS: G.I. back (jam) nuts 25 mm dia Carriage of materials and sundries

0116 0114

LABOUR: Fitter grade-I Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

8.00

L.S.

5.33

1.49

Day Day

0.33 0.33

301.00 247.00 Total: 196.78

Add water charges @ 1% on

DSR-12

Page 832 of 2298

Add C.P & OH @15% on 198.75 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 228.56 Rs 228.55

Item Code: 18.15.1 P/F bib cock of approved quality : 15 mm nominal bore Code 1339 9999

Description MATERIALS :15mm dia. brass bib cock. Carriage of materials and fixing charge

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 8.06

Add water charges @ 1% on

Rate 165.00 1.49 Total: 177.01

Add C.P & OH @15% on 178.78 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 205.60 Rs 205.60

Item Code: 18.15.2 Pr/F brass bib cock of approved quality : 20mm nominal bore Code

Description

1340

MATERIALS: 20mm dia. brass bih cock.

9999

Carriage of materials and fixing charge

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

215.00

L.S.

9.49

1.49 Total: 229.14

Add water charges @ 1% on

Add C.P & OH @15% on 231.43 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 266.14 Rs 266.15

Item Code: 18.16.1 P/F brass stop cock of approved quality : 15 mm nominal bore Code 1342 9999

Description Brass Stopcock 15mm dia Carriage of materials and fixing charge

Details of Cost for : 1.00 No. Unit Quantity each 1.00 L.S. 8.06 Add water charges @ 1% on

Rate 165.00 1.49 Total: 177.01

Add C.P & OH @15% on 178.78 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 205.60 Rs 205.60

Item Code: 18.16.2

DSR-12

Page 833 of 2298

P/F brass stop cock of approved quality : 20 mm nominal bore Code 1343 9999

Description MATERIALS: Brass stopcock 20 mm dia Carriage of materials and fixing charge

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 9.79

Add water charges @ 1% on

Rate 215.00 1.49 Total: 229.59

Add C.P & OH @15% on 231.89 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 266.67 Rs 266.65

Item Code: 18.17.1 P/F gun metal gate valve with C.I. wheel (screwed end) : 25 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity 1927 Brass gate valve with wheel - 25mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 10.79 Add water charges @ 1% on

Rate 305.00 1.49 Total: 321.08

Add C.P & OH @15% on 324.29 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 372.93 Rs 372.95

Item Code: 18.17.2 P/F gun metal gate valve with C.I. wheel (screwed end) : 32 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity 1928 Brass gate valve with wheel - 32mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 12.22 Add water charges @ 1% on

Rate 370.00 1.49 Total: 388.21

Add C.P & OH @15% on 392.09 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 450.90 Rs 450.90

Item Code: 18.17.3 P/F gun metal gate valve with C.I. wheel (screwed end) : 40 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity 1929 Brass gate valve with wheel - 40mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 450.00 1.49 Total: 470.14

Add C.P & OH @15% on 474.84 Cost for 1.00 No.

DSR-12

Page 834 of 2298

Rate per Each: Rate as per DSR-12:

Rs 546.07 Rs 546.05

Item Code: 18.17.4 P/F gun metal gate valve with C.I. wheel (screwed end) : 50 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity 1930 Brass gate valve with wheel - 50mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 14.82 Add water charges @ 1% on

Rate 650.00 1.49 Total: 672.08

Add C.P & OH @15% on 678.80 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 780.62 Rs 780.60

Item Code: 18.17.5 P/F brass gate valve : 65 mm nominal bore. Code 1931 9999

Description MATERIALS :65mm dia Gun metal gate valve with wheel Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 16.12

Add water charges @ 1% on

Rate 900.00 1.49 Total: 924.02

Add C.P & OH @15% on 933.26 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1073.25 Rs 1073.25

Item Code: 18.17.6 P/F brass gate valve : 80 mm nominal bore. Code 1932 9999

Description MATERIALS :50mm dia Gun metal gate valve with wheel Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 18.85

Add water charges @ 1% on

Rate 1550.00 1.49 Total: 1578.09

Add C.P & OH @15% on 1593.87 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1832.95 Rs 1832.95

Item Code: 18.18.1 P/F ball valve (brass) - High or low pressure, with plastic floats complete : 15 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity 1922 H.P. or L.P. ball valve with polythene floats: 15mm dia. each 1.00 9999 Carriage of materials and fixing charges L.S. 21.58

DSR-12

Rate 190.00 1.49

Page 835 of 2298

Add water charges @ 1% on

Total: 222.15

Add C.P & OH @15% on 224.37 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 258.03 Rs 258.05

Item Code: 18.18.2 P/F ball valve (brass) - High or low pressure, with plastic floats complete : 20 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity 1923 Brass ball valve - 20mm each 1.00 9999 Carriage of materials and fixing charges L.S. 26.91 Add water charges @ 1% on

Rate 270.00 1.49 Total: 310.10

Add C.P & OH @15% on 313.20 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 360.18 Rs 360.20

Item Code: 18.18.3 P/F ball valve (brass) - High or low pressure, with plastic floats complete : 25 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity 1924 Brass ball valve - 25mm each 1.00 9999 Carriage of materials and fixing charges L.S. 32.24 Add water charges @ 1% on

Rate 315.00 1.49 Total: 363.04

Add C.P & OH @15% on 366.67 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 421.67 Rs 421.65

Item Code: 18.19.1.1 P/F gun metal non- return valve of (screwed end) : 25 mmnominal bore Horizontal Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate

310.00 1.49 Total: 330.14

Add C.P & OH @15% on 333.44 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 383.46 Rs 383.45

Page 836 of 2298

Item Code: 18.19.1.2 P/F gun metal non- return valve of (screwed end) : 25 mmnominal bore Vertical Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS :3080 25mm non return valve each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate 320.00 1.49 Total: 340.14

Add C.P & OH @15% on 343.54 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 395.07 Rs 395.05

Item Code: 18.19.2.1 P/F gun metal non- return valve of (screwed end) : 32 mmnominal bore Horizontal Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1934 Gunmetal non-return valve-horizontal (screwed end) 32 mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 14.82 Add water charges @ 1% on

Rate

400.00 1.49 Total: 422.08

Add C.P & OH @15% on 426.30 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 490.25 Rs 490.25

Item Code: 18.19.2.2 P/F gun metal non- return valve of (screwed end) : 32 mmnominal bore Vertical Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 3084 Gunmetal non-return valve-vertical (screwed end) 32 mm dia

9999

Rate

each

1.00

490.00

L.S.

14.82

1.49 Total: 512.08

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on 517.20 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 594.78 Rs 594.80

Item Code: 18.19.3.1

DSR-12

Page 837 of 2298

P/F gun metal non- return valve of (screwed end) : 40 mmnominal bore Horizontal Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1935 Gunmetal non-return valve-horizontal (screwed end) 40 mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 16.12 Add water charges @ 1% on

Rate

510.00 1.49 Total: 534.02

Add C.P & OH @15% on 539.36 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 620.26 Rs 620.25

Item Code: 18.19.3.2 P/F gun metal non- return valve of (screwed end) : 40 mm nominal bore Vertical Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 3088 Gunmetal non-return valve-vertical (screwed end) 40 mm dia

9999

Rate

each

1.00

680.00

L.S.

16.12

1.49 Total: 704.02

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on 711.06 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 817.72 Rs 817.70

Item Code: 18.19.4.1 P/F gun metal non- return valve of (screwed end) : 50 mmnominal bore Horizontal Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1936 Gunmetal non-return valve-horizontal (screwed end) 50 mm dia each 1.00 9999 Carriage of materials and fixing charges L.S. 17.55 Add water charges @ 1% on

Rate

780.00 1.49 Total: 806.15

Add C.P & OH @15% on 814.21 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 936.34 Rs 936.35

Item Code: 18.19.4.2

DSR-12

Page 838 of 2298

P/F gun metal non- return valve of (screwed end) : 40 mmnominal bore Vertical Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 3092 Gunmetal non-return valve-vertical (screwed end) 50 mm dia

9999

Rate

each

1.00

930.00

L.S.

17.55

1.49 Total: 956.15

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on 965.71 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1110.57 Rs 1110.55

Item Code: 18.19.5.1 P/F gun metal non-return valve (screwed end) 65 mm nominal bore : Horizontal. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS :1937 65mm non return valve each 1.00 9999 Carriage of materials and fixing charges L.S. 18.85 Add water charges @ 1% on

Rate 1420.00 1.49 Total: 1448.09

Add C.P & OH @15% on 1462.57 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1681.96 Rs 1681.95

Item Code: 18.19.5.2 P/F gun metal non-return valve (screwed end) 65 mm nominal bore : Vertical. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS :3096 65mm non return valve each 1.00 9999 Carriage of materials and fixing charges L.S. 18.85 Add water charges @ 1% on

Rate 1650.00 1.49 Total: 1678.09

Add C.P & OH @15% on 1694.87 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1949.10 Rs 1949.10

Item Code: 18.19.6.1 P/F gun metal non-return valve (screwed end) 80 mm nominal bore : Horizontal. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS :1938 80mm non return valve each 1.00 9999 Carriage of materials and fixing charges L.S. 20.28

DSR-12

Rate 2030.00 1.49

Page 839 of 2298

Add water charges @ 1% on

Total: 2060.22

Add C.P & OH @15% on 2080.82 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2392.94 Rs 2392.95

Item Code: 18.19.6.2 P/F gun metal non-return valve (screwed end) 80 mm nominal bore : Vertical. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS :3300 80mm non return valve each 1.00 9999 Carriage of materials and fixing charges L.S. 20.28 Add water charges @ 1% on

Rate 2630.00 1.49 Total: 2660.22

Add C.P & OH @15% on 2686.82 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3089.84 Rs 3089.85

Item Code: 18.20.1 P/F brass ferrule :- 15 mm nominal bore. Code 1360 9999

Description MATERIALS :15mrn diameter brass-ferrule Carriage of material and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 40.30

Add water charges @ 1% on

Rate 115.00 1.49 Total: 175.05

Add C.P & OH @15% on 176.80 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 203.32 Rs 203.30

Item Code: 18.20.2 P/F brass ferrule :- 20 mm nominal bore. Code 1361 9999

Description MATERIALS :20mm diameter brass-ferrule, Carriage of material and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 47.19

Add water charges @ 1% on

Rate 145.00 1.49 Total: 215.31

Add C.P & OH @15% on 217.46 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 250.08 Rs 250.10

Page 840 of 2298

Item Code: 18.20.3 P/F brass ferrule :- 25 mm nominal bore. Code 1362 9999

Description MATERIALS :25mm diameter brass-ferrule, Carriage of material and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 53.82

Add water charges @ 1% on

Rate 205.00 1.49 Total: 285.19

Add C.P & OH @15% on 288.04 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 331.25 Rs 331.25

Item Code: 18.21.1.1 P/F uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1687 Unplasticised P.V.C.connection pipe with brass union 30 cm long: 15 mm bore each 1.00 9999 Carriage of materials and fixing charges L.S. 12.22 Add water charges @ 1% on

Rate

26.00 1.49 Total: 44.21

Add C.P & OH @15% on 44.65 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 51.35 Rs 51.35

Item Code: 18.21.1.2 P/F uplasticised PVC connection pipe with brass unions : 30 cm length 20 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1688 Unplasticised P.V.C.connection pipe with brass union 30 cm long: 20 mm bore each 1.00 9999 Carriage of materials and fixing charges L.S. 12.22 Add water charges @ 1% on

Rate

33.00 1.49 Total: 51.21

Add C.P & OH @15% on 51.72 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 59.48 Rs 59.50

Item Code: 18.21.2.1 P/F uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore _x000D_

DSR-12

Page 841 of 2298

Code 1689 9999

Details of Cost for : 1.00 No. Unit Quantity

Description

MATERIALS: Unplasticised P.V.C. connection pipe with brass union 45 cm each long 15 mm bore Carriage of materials and fixing charges L.S.

Rate

1.00

33.00

13.52

1.49 Total: 53.14

Add water charges @ 1% on

Add C.P & OH @15% on 53.67 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 61.72 Rs 61.70

Item Code: 18.21.2.2 P/F uplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 1690 Unplasticised P.V.C.connection pipe with brass union 45 cm long: 20 mm bore each 1.00 9999 Carriage of materials and fixing charges L.S. 13.52 Add water charges @ 1% on

Rate

43.00 1.49 Total: 63.14

Add C.P & OH @15% on 63.77 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 73.34 Rs 73.35

Item Code: 18.22.1 P/F C.P. brass shower rose with 15 or 20 mm inlet : _x000D_ Code 1878 9999

Details of Cost for : 1.00 No. Unit Quantity each 1.00

Description 100mm dia CP brass shower rose Carriage of materials and fixing charges

L.S.

6.76

Add water charges @ 1% on

Rate 40.00 1.49 Total: 50.07

Add C.P & OH @15% on 50.57 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 58.16 Rs 58.15

Item Code: 18.22.2 P/F C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter Code 1879

Description

Details of Cost for : 1.00 No. Unit Quantity

each

DSR-12

Rate

MATERIALS: Shower rose C.P.brass for 15 to 20 mm inlet:150 mm dia 1.00

55.00

Page 842 of 2298

9999

Carriage of materials and fixing charges L.S.

8.06

Add water charges @ 1% on

1.49 Total: 67.01

Add C.P & OH @15% on 67.68 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 77.83 Rs 77.85

Item Code: 18.23 Laying centrifugally cast (spun) iron S & S or flanged pipes. Code

0116 0117 0114 9999

Description 10 m of 200 mm dia C.I. pipe class ‘A’ Weight = (2x257) = 514kg = 5.14 quintal Labour for laying pipe Fitter Asstt. Fitter Beldar Sundries

Details of Cost for : 5.14 Qtl Unit Quantity

Day Day Day L.S.

0.17 0.17 1.33 16.12

Add water charges @ 1% on

Rate

301.00 273.00 247.00 1.49 Total: 450.11

Add C.P & OH @15% on 454.61 Cost for 5.14 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 101.71 Rs 101.70

Item Code: 18.24 Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc. Details of Cost for : 7.00 Qtl Code Description Unit Quantity 10 Nos. Tee 200x150mm Weight = 70x10 = 700kg. Labour for laying tee0116 Fitter Day 0.93 0117 Asst. Fitter Day 0.62 0114 Beldar Day 2.48 9999 Sundries L.S. 40.17 Add water charges @ 1% on

Rate

301.00 273.00 247.00 1.49 Total: 1121.60

Add C.P & OH @15% on 1132.82 Cost for 7.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 186.11 Rs 186.10

Item Code: 18.25.1 P/L S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) :- Upto 300 mm dia.

Code 1464

DSR-12

Description MATERIALS :Cost of specials

Details of Cost for : 1.00 Qtl Unit Quantity quint

1.00

Rate 3450.00

Page 843 of 2298

2309 18.024

Carriage of material tonne LABOUR Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.

0.10

77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total: 3457.77

Add C.P & OH @15% except on [A] i.e on 3492.35 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 4202.31 Rs 4202.35

Item Code: 18.25.2 P/L S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) :- Over 300 mm dia.

Code 1466 2309 18.024

Description

Details of Cost for : 1.00 Qtl Unit Quantity

MATERIALS :Cost of specials quint Carriage of materials tonne LABOUR Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.

Rate

1.00 0.10

3550.00 77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total: 3557.77

Add C.P & OH @15% except on [A] i.e on 3593.35 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 4318.46 Rs 4318.50

Item Code: 18.26.1 P/L flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc.: Upto 300 mm dia. Details of Cost for : 1.00 Qtl Code Description Unit Quantity MATERIALS :1468 Cost of specials quint 1.00 2309 Carriage of materials tonne 0.10 LABOUR 18.024 Laying S & S or flanged C.I. special such as tees, bends, collars, 1.00 tapers and caps etc. Add water charges @ 1% except on [A] i.e on

Rate 5300.00 77.67 186.11 Total: 5307.77

Add C.P & OH @15% except on [A] i.e on 5360.85 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 6351.09 Rs 6351.10

Item Code: 18.26.2 P/L flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc.: Over 300 mm dia. Details of Cost for : 1.00 Qtl Code Description Unit Quantity MATERIALS :-

DSR-12

Rate

Page 844 of 2298

1470 2309 18.024

Cost of specials quint Carriage of materials tonne LABOUR Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.

1.00 0.10

5600.00 77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total: 5607.77

Add C.P & OH @15% except on [A] i.e on 5663.85 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 6699.54 Rs 6699.55

Item Code: 18.27.1 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 100 mm dia. pipe. Code

7697 2319 18.023

Details of Cost for : 10.00 m Unit Quantity

Description

MATERIALS :100mm dia. spun iron pipes (in 5.5 m lengths) weightof 1m pipe = 19.820 kg Weight of 10m pipes 19.820x10= 198.20 Kg Cost of pipe Metre Carriage of pipes 100 m Labour for lay ing Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

830.00 191.48

1.98

101.71

Add water charges @ 1% except on [A] i.e on

Total: 8319.15

Add C.P & OH @15% except on [A] i.e on 8402.34 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 986.41 Rs 986.40

Item Code: 18.27.2 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 125 mm dia. pipe. Code

7698 2320 18.023

Description

Details of Cost for : 10.00 m Unit Quantity

MATERIALS :125mm dia. spun iron pipes (in 5.5 m lengths) weightof 1m pipe = 25.82 kg Weight of 10m pipes 25.820x10 = 258.20 Kg Cost of pipe metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

1040.00 256.77

2.58

101.71

Add water charges @ 1% except on [A] i.e on

Total: 10425.68

Add C.P & OH @15% except on [A] i.e on 10529.94 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 1237.18 Rs 1237.15

Page 845 of 2298

Item Code: 18.27.3 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 150 mm dia. pipe. Code

7699 2321 18.023

Details of Cost for : 10.00 m Unit Quantity

Description

MATERIALS :150mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m pipe = 32.18 kg Weight of 10m pipes 32.18x10 = 321.80 Kg Cost of pipe metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

1240.00 319.12

3.22

101.71

Add water charges @ 1% except on [A] i.e on

Total: 12431.91

Add C.P & OH @15% except on [A] i.e on 12556.23 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1476.72 Rs 1476.70

Item Code: 18.27.4 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 200 mm dia. pipe. Code

7700 2322 18.023

Details of Cost for : 10.00 m Unit Quantity

Description

MATERIALS :200mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m pipe = 47.090 kg Weight of 10m pipes 47.090x10 = 470.90 Kg Cost of pipe Metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

2120.00 519.11

4.71

101.71

Add water charges @ 1% except on [A] i.e on

Total: 21251.91

Add C.P & OH @15% except on [A] i.e on 21464.43 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2516.31 Rs 2516.30

Item Code: 18.27.5 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 250 mm dia. pipe. Code

7701 2323 18.023

DSR-12

Description

Details of Cost for : 10.00 m Unit Quantity

MATERIALS :250mm dia. spun iron pipes (in 5.5 m lengths) weightof 1m pipe = 63.450 kg Weight of 10m pipes 63.450x10 = 634.50 Kg Cost of pipe Metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

2830.00 737.68

6.35

101.71

Page 846 of 2298

Add water charges @ 1% except on [A] i.e on

Total: 28373.77

Add C.P & OH @15% except on [A] i.e on 28657.51 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3360.20 Rs 3360.20

Item Code: 18.27.6 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 300 mm dia. pipe. Code

7702 2324 18.023

Details of Cost for : 10.00 m Unit Quantity

Description

MATERIALS:300mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m pipe = 81.820 kg Weight of 10m pipes 81.820x10 = 818.20 Kg Cost of pipe Metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

3740.00 911.78

8.18

101.71

Add water charges @ 1% except on [A] i.e on

Total: 37491.18

Add C.P & OH @15% except on [A] i.e on 37866.09 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4437.80 Rs 4437.80

Item Code: 18.27.7 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 350 mm dia. pipe. Code

7703 2325 18.023

Details of Cost for : 10.00 m Unit Quantity

Description

MATERIALS :350mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m pipe = 103.10 kg Weight of 10m pipes 103.10x10 =1031.00 kg Cost of pipe metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

4500.00 1276.50

10.31

101.71

Add water charges @ 1% except on [A] i.e on

Total: 45127.65

Add C.P & OH @15% except on [A] i.e on 45578.93 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5346.44 Rs 5346.45

Item Code: 18.27.8 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 400 mm dia. pipe. Code

DSR-12

Description

Details of Cost for : 10.00 m Unit Quantity

Rate

Page 847 of 2298

7704 2326 18.023

MATERIALS :400mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m pipe = 125.40 kg Weight of 10m pipes 125.450x10 = 1254.50 Kg Cost of pipe Metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

10.00 10.00

5870.00 1740.68

12.55

101.71

Add water charges @ 1% except on [A] i.e on

Total: 58874.07

Add C.P & OH @15% except on [A] i.e on 59462.81 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 6965.87 Rs 6965.85

Item Code: 18.27.9 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 450 mm dia. pipe. Code

7705 2327 18.023

Details of Cost for : 10.00 m Unit Quantity

Description

MATERIALS :450mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m pipe = 151.27 kg Weight of 10m pipes 151.270x 10 = 1512.70 Kg Cost of pipe Metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

7100.00 2127.50

15.13

101.71

Add water charges @ 1% except on [A] i.e on

Total: 71212.75

Add C.P & OH @15% except on [A] i.e on 71924.88 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 8425.25 Rs 8425.25

Item Code: 18.27.10 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 500 mm dia. pipe. Code

7706 2328 18.023

Description

Details of Cost for : 10.00 m Unit Quantity

MATERIALS :500mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m pipe = 177.09 kg Weight of 10m pipes 177.090x10 = 1770.90 Kg Cost of pipe Metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

8250.00 2127.50

17.71

101.71

Add water charges @ 1% except on [A] i.e on

Total: 82712.75

Add C.P & OH @15% except on [A] i.e on 83539.88 Cost for 10.00 m

DSR-12

Page 848 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 9787.21 Rs 9787.20

Item Code: 18.27.11 P/L S & S centrifugally cast (spun) iron pipes (Class LA): 600 mm dia. pipe. Code

7707 2329 18.023

Description

Details of Cost for : 10.00 m Unit Quantity

MATERIALS :600mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m pipe = 236.00 kg Weight of 10m pipes 236.000x10 = 2360.00 Kg Cost of pipe Metre Carriage of pipes 100 m Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00 10.00

11450.00 3191.25

23.60

101.71

Add water charges @ 1% except on [A] i.e on

Total: 114819.13

Add C.P & OH @15% except on [A] i.e on 115967.32 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 13576.28 Rs 13576.25

Item Code: 18.28.1 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 100 mm diameter pipe.

Code

1881 0761 0771 9999 9999 0116 0117 0114

Description Details of cost for 10 joints MATERIALS :Spun yarn 0.17x 10 =1.70 kg. Fuel wood Kerosene oil Sundries Carriage of materials LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

kilog quint litre L.S. L.S.

1.70 0.28 0.38 6.76 5.33

40.00 450.00 30.00 1.49 1.49

Day Day Day

1.00 1.00 2.00

301.00 273.00 247.00 Total: 1291.41

Add water charges @ 1% on

Add C.P & OH @15% on 1304.32 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 150.00 Rs 150.00

Item Code: 18.28.2 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 125 mm diameter pipe.

Code

DSR-12

Description Details of cost for 10 joints

Details of Cost for : 10.00 Nos Unit Quantity

Rate

Page 849 of 2298

1881 0761 0771 9999 9999 0116 0117 0114

Materials :Spun yarn 0.20x10=2.00 kg. Fuel wood Kersosene oil Sundries Carriage of materials LabourFitter Asstt. Fitter Beldar

kilog quint litre L.S. L.S.

2.00 0.37 0.76 9.49 9.49

40.00 450.00 30.00 1.49 1.49

Day Day Day

1.50 1.50 3.00

301.00 273.00 247.00 Total: 1899.58

Add water charges @ 1% on

Add C.P & OH @15% on 1918.58 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 220.64 Rs 220.65

Item Code: 18.28.3 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 150 mm diameter pipe.

Code

1881 0761 0771 9999 9999 0116 0117 0114

Description Details of cost for 10 joints MATERIALS :Spun yarn 0.23x10=2.30 kg, Fuel Wood Kerosene oil Sundries Carriage of materials LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

kilog quint litre L.S. L.S.

2.30 0.42 0.76 10.79 10.79

40.00 450.00 30.00 1.49 1.49

Day Day Day

1.50 1.50 3.00

301.00 273.00 247.00 Total: 1937.96

Add water charges @ 1% on

Add C.P & OH @15% on 1957.34 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 225.09 Rs 225.10

Item Code: 18.28.4 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 joints MATERIALS :1881 Spun yarn 0.3x10=3.00 kg. kilog 3.00 0761 Fuel wood quint 0.56 0771 Kerosene oil litre 0.76 9999 Sundries L.S. 13.52 9999 Carriage of materials L.S. 13.52 LABOUR­ 0116 Fitter Day 2.00 0117 Asstt. Fitter Day 2.00

DSR-12

Rate

40.00 450.00 30.00 1.49 1.49 301.00 273.00

Page 850 of 2298

0114

Beldar

Day

4.00

Add water charges @ 1% on

247.00 Total: 2571.08

Add C.P & OH @15% on 2596.79 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 298.63 Rs 298.65

Item Code: 18.28.5 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 250 mm diameter pipe.

Code

1881 0761 0771 9999 9999 0116 0117 0114

Description Details of cost for 10 joints MATERIALS :Spun yarn 0.4x10=4 00 kg. Fuel Wood Kerosene oil Sundries Carriage of materials LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

kilog quint litre L.S. L.S.

4.00 0.65 1.14 17.55 17.55

40.00 450.00 30.00 1.49 1.49

Day Day Day

2.50 2.50 5.00

301.00 273.00 247.00 Total: 3209.00

Add water charges @ 1% on

Add C.P & OH @15% on 3241.09 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 372.73 Rs 372.70

Item Code: 18.28.6 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 300 mm diameter pipe.

Code

1881 0761 0771 9999 9999 0116 0117 0114

Description Details of cost for 10 joints MATERIALS :Spun yarn 0.54x10 =5.40 kg Fuel Wood Kerosene oil Sundries Carriage of materials LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

kilog quint litre L.S. L.S.

5.40 0.75 1.52 20.28 20.28

40.00 450.00 30.00 1.49 1.49

Day Day Day

3.00 3.00 6.00

301.00 273.00 247.00 Total: 3863.54

Add water charges @ 1% on

Add C.P & OH @15% on 3902.18 Cost for 10.00 Nos Rate per Each:

DSR-12

Rs 448.75

Page 851 of 2298

Rate as per DSR-12:

Rs 448.75

Item Code: 18.28.7 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 350 mm diameter pipe.

Code

1881 0761 0771 9999 9999 0116 0117 0114

Description Details of cost for 10 joints MATERIALS :Spun yarn 0.62x10=6.20 kg Fuel Wood Kerosene oil Sundries Carriage of materials LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

kilog quint litre L.S. L.S.

6.20 0.93 1.70 24.18 24.18

40.00 450.00 30.00 1.49 1.49

Day Day Day

3.00 3.00 6.00

301.00 273.00 247.00 Total: 3993.56

Add water charges @ 1% on

Add C.P & OH @15% on 4033.50 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 463.85 Rs 463.85

Item Code: 18.28.8 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 400 mm diameter pipe.

Code

1881 0761 0771 9999 9999 0116 0117 0114

Description Details of cost for 10 joints MATERIALS :Spun yarn 0.74x10=7.40 kg Fuel Wood Kerosene oil Sundries Carriage of materials LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

kilog quint litre L.S. L.S.

7.40 1.12 1.70 26.91 26.91

40.00 450.00 30.00 1.49 1.49

Day Day Day

4.00 4.00 8.00

301.00 273.00 247.00 Total: 5203.20

Add water charges @ 1% on

Add C.P & OH @15% on 5255.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 604.35 Rs 604.35

Item Code: 18.28.9 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 450 mm diameter pipe.

Code

DSR-12

Description

Details of Cost for : 10.00 Nos Unit Quantity

Rate

Page 852 of 2298

1881 0761 0771 9999 9999 0116 0117 0114

Details of cost for 10 joints MATERIALS :Spun yarn 0.79x10=7.90 kg. Fuel Wood Kerosene oil Sundries Carriage of materials LABOURFitter Asstt. Fitter Beldar

kilog quint litre L.S. L.S.

7.90 1.21 2.27 31.07 31.07

40.00 450.00 30.00 1.49 1.49

Day Day Day

4.50 4.50 9.00

301.00 273.00 247.00 Total: 5827.18

Add water charges @ 1% on

Add C.P & OH @15% on 5885.45 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 676.83 Rs 676.85

Item Code: 18.28.10 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 500 mm diameter pipe.

Code

1881 0761 0771 9999 9999 0116 0117 0114

Description Details of cost for 10 joints MATERIALS:Sgun yarn 0.85x10=8.50 kg. Fuel wood Kerosene oil Sundries Carriage of materials LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

kilog quint litre L.S. L.S.

8.50 1.31 2.27 33.67 33.67

40.00 450.00 30.00 1.49 1.49

Day Day Day

4.75 4.75 9.50

301.00 273.00 247.00 Total: 6170.94

Add water charges @ 1% on

Add C.P & OH @15% on 6232.65 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 716.76 Rs 716.75

Item Code: 18.28.11 Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 600 mm diameter pipe.

Code

1881 0761 0771 9999 9999

DSR-12

Description Details of cost for 10 joints MATERIALS :Spun yarn 1.02x10=10.20 kg. Fuel wood Kerosene oil Sundries Carriage of materials LABOUR-

Details of Cost for : 10.00 Nos Unit Quantity

kilog quint litre L.S. L.S.

10.20 1.68 2.84 40.30 40.30

Rate

40.00 450.00 30.00 1.49 1.49

Page 853 of 2298

0116 0117 0114

Fitter Asstt. Fitter Beldar

Day Day Day

6.50 6.50 13.00

Add water charges @ 1% on

301.00 273.00 247.00 Total: 8311.30

Add C.P & OH @15% on 8394.41 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 965.36 Rs 965.35

Item Code: 18.29 Code 1397 2341

Details of Cost for : 1.00 Qtl Unit Quantity

Description MATERIALS: Lead Carrigae

kilog tonne

100.00 0.10

Add water charges @ 1% on

Rate 90.00 77.87 Total: 9007.79

Add C.P & OH @15% on 9097.87 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 10462.55 Rs 10462.55

Item Code: 18.30.1 Providing flanged joints to double flanged CI pipes:- 80 mm diameter pipe. Code

1373 1956 9999 0116 0117 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 joints MATERIALS :Rubber insertion 3mm thick Bolts and nuts 16mm dia, 60 mmlong Carriage of matonal LABOURFitter Asstt. Fitter Beldar

Rate

each each L.S.

10.00 40.00 2.73

11.00 10.00 1.49

Day Day Day

0.15 0.15 0.80

301.00 273.00 247.00 Total: 797.77

Add water charges @ 1% on

Add C.P & OH @15% on 805.75 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 92.66 Rs 92.65

Item Code: 18.30.2 Providing flanged joints to double flanged CI pipes:- 100 mm diameter pipe. Code

1374 1956

DSR-12

Description Details of cost for 10 joints MATERIALS :Rubber insertion 3mm thick Bolts and nuts 16mm dia, 60 mm long

Details of Cost for : 10.00 Nos Unit Quantity

each each

10.00 80.00

Rate

14.00 10.00

Page 854 of 2298

9999 0116 0117 0114

Carriage of materials LABOURFitter Asstt. Fitter Beldar

L.S.

4.16

1.49

Day Day Day

0.25 0.25 1.00

301.00 273.00 247.00 Total: 1336.70

Add water charges @ 1% on

Add C.P & OH @15% on 1350.07 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 155.26 Rs 155.25

Item Code: 18.30.3 Providing flanged joints to double flanged CI pipes:- 125 mm diameter pipe. Code

1375 1957 9999 0116 0117 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 joints MATERIALS:Rubber insertion 3mrn thick Bolts and nuts 16mm dia 65mm long Carriage of materials LABOURFitter Asstt. Fitter Beldar

Rate

each each L.S.

10.00 80.00 4.16

15.00 11.00 1.49

Day Day Day

0.25 0.25 1.00

301.00 273.00 247.00 Total: 1426.70

Add water charges @ 1% on

Add C.P & OH @15% on 1440.97 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 165.71 Rs 165.70

Item Code: 18.30.4 Providing flanged joints to double flanged CI pipes:- 150 mm diameter pipe. Code

1376 1958 9999 0116 0117 0114

Description Details of cost for 10 joints MATERIALS :Rubber insertion 3mm thick Bolts and nuts 20 mm dia, 65mm long Carriage of material LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

each each L.S.

10.00 80.00 4.16

17.00 13.00 1.49

Day Day Day

0.30 0.30 1.10

301.00 273.00 247.00 Total: 1660.10

Add water charges @ 1% on

Add C.P & OH @15% on 1676.70 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 192.82 Rs 192.80

Page 855 of 2298

Item Code: 18.30.5 Providing flanged joints to double flanged CI pipes:- 200 mm diameter pipe. Code

1377 1959 9999 0116 0117 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 joints Materials :Rubber insertion 3mm thick Bolts and nuts 20mm dia 70mm long Carrage of materials LabourFitter Asstt. Fitter Beldar

Rate

each each L.S.

10.00 80.00 4.16

22.00 13.00 1.49

Day Day Day

0.30 0.30 1.10

301.00 273.00 247.00 Total: 1710.10

Add water charges @ 1% on

Add C.P & OH @15% on 1727.20 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 198.63 Rs 198.65

Item Code: 18.30.6 Providing flanged joints to double flanged CI pipes:- 250 mm diameter pipe. Code

1378 1960 9999 0116 0117 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 joints MATERIALS :Rubber insertign 3mm thick Bolts and nuts 20mm dia 75mm long LABOURCarriage of material Fitter Asstt. Fitter Beldar

each each L.S. Day Day Day

Rate

10.00 120.00

32.00 14.00

5.33 0.40 0.40 1.30

1.49 301.00 273.00 247.00 Total: 2558.64

Add water charges @ 1% on

Add C.P & OH @15% on 2584.23 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 297.19 Rs 297.20

Item Code: 18.30.7 Providing flanged joints to double flanged CI pipes:- 300 mm diameter pipe. Code

1379 1960 9999 0116 0117 0114

DSR-12

Description Details of cost for 10 joints MATERIALS :Rubber insertion 3mm thick Bolts and nuts 20mm dia 75mm long Carnage of materials LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

each each L.S. Day Day Day

Rate

10.00 120.00 5.33

40.00 14.00 1.49

0.40 0.40 1.30

301.00 273.00 247.00

Page 856 of 2298

Add water charges @ 1% on

Total: 2638.64

Add C.P & OH @15% on 2665.03 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 306.48 Rs 306.50

Item Code: 18.30.8 Providing flanged joints to double flanged CI pipes:- 350 mm diameter pipe. Code

1380 1961 9999 0116 0117 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 joints MATERIALS :Rubber insertion 3mm thick Bolts and nuts 20mm dia 80 mmlong Carriage of materials LABOURFitter Asstt. Fitter Beldar

each each L.S. Day Day Day

Rate

10.00 160.00 5.33

45.00 15.00 1.49

0.50 0.50 1.50

301.00 273.00 247.00 Total: 3515.44

Add water charges @ 1% on

Add C.P & OH @15% on 3550.59 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 408.32 Rs 408.30

Item Code: 18.30.9 Providing flanged joints to double flanged CI pipes:- 400 mm diameter pipe. Code

1381 1962 9999 0116 0117 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 joints Materials :Rubber insertion 3mm thick Bolts and nuts 24mm dia 85mm long Carriage of materials LabourFitter Asstt. Fitter Beldar

each each L.S. Day Day Day

Rate

10.00 160.00 8.06

67.00 27.00 1.49

0.50 0.50 1.50

301.00 273.00 247.00 Total: 5659.51

Add water charges @ 1% on

Add C.P & OH @15% on 5716.11 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 657.35 Rs 657.35

Item Code: 18.30.10 Providing flanged joints to double flanged CI pipes:- 450 mm diameter pipe. Code

DSR-12

Description

Details of Cost for : 10.00 Nos Unit Quantity

Rate

Page 857 of 2298

1382 1962 9999 0116 0117 0114

Details of cost for 10 joints MATERIALS :Rubber insertion 3mm thick Bolts and nuts 24mm dia 85mm long Crriage of materials LABOURFitter Asstt. Fitter Beldar

each each L.S. Day Day Day

10.00 200.00 8.06

84.00 27.00 1.49

0.60 0.60 1.70

301.00 273.00 247.00 Total: 7016.31

Add water charges @ 1% on

Add C.P & OH @15% on 7086.47 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 814.94 Rs 814.95

Item Code: 18.30.11 Providing flanged joints to double flanged CI pipes:- 500 mm diameter pipe. Code

1383 1963 9999 0116 0117 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description Details of cost for 10 joints MATERIALS :Rubber insertion 3 mm thick Bolts and nuts 24 mm dia 90 mm long Carriage of materials LABOURFitter Asstt. Fitter Beldar

each each L.S. Day Day Day

Rate

10.00 200.00 8.06

106.00 29.00 1.49

0.65 0.65 1.80

301.00 273.00 247.00 Total: 7689.71

Add water charges @ 1% on

Add C.P & OH @15% on 7766.61 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 893.16 Rs 893.15

Item Code: 18.30.12 Providing flanged joints to double flanged CI pipes:- 600 mm diameter pipe. Code

1384 1964 9999 0116 0117 0114

Description Details of cost for 10 joints MATERIALS :Rubber insertion 3mm thick Bolds and nuts 20mm dia 75mm long Carriage of materials LABOURFitter Asstt. Fitter Beldar

Details of Cost for : 10.00 Nos Unit Quantity

each each L.S. Day Day Day

Rate

10.00 200.00 9.49

118.00 35.00 1.49

0.75 0.75 2.00

301.00 273.00 247.00 Total: 9118.64

Add water charges @ 1% on

Add C.P & OH @15% on 9209.83 Cost for 10.00 Nos

DSR-12

Page 858 of 2298

Rate per Each: Rate as per DSR-12:

Rs 1059.13 Rs 1059.15

Item Code: 18.31.1.1 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 100 mm diameter : Class I. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 sluice valves MATERIALS :1940 100mm dia. sluice valves (with cap) each 10.00 Carriage pf sluice valves 2309 wt.= 44.3x10=443kg= 0.443t. say 0.44t tonne 0.44 Labour for laying sluice valve 18.024 Laying S & S or flanged C.I. special such as tees, bends, collars, 4.43 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. 18.030.02 Providing flanged joints to double flanged CI pipes:- 100 mm 20.00 diameter pipe. Add water charges @ 1% except on [A]+[B] i.e on

Rate

2300.00 77.67 186.11

155.26 Total: 23034.17

Add C.P & OH @15% except on [A]+[B] i.e on 23264.51 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 3068.39 Rs 3068.35

Item Code: 18.31.1.2 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 100 mm diameter : Class II.

Code

3311 2309 18.024

18.030.02

Details of Cost for : 10.00 Nos Description Unit Quantity Details of cost for 10 sluice valves MATERIALS :100mm dia. sluice.valves (wiith cap) each 10.00 Carriage of sluice valves wt.= 56.3x10=563kg = 0.563 t. say 0.56t tonne 0.56 Labour for laying sluice valve Laying S & S or flanged C.I. special such as tees, bends, collars, 5.63 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. Providing flanged joints to double flanged CI pipes:- 100 mm 20.00 diameter pipe. Add water charges @ 1% except on [A]+[B] i.e on

Rate

2650.00 77.67 186.11

155.26 Total: 26543.50

Add C.P & OH @15% except on [A]+[B] i.e on 26808.94 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 3498.33 Rs 3498.30

Item Code: 18.31.2.1 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 125 mm diameter : Class I.

DSR-12

Page 859 of 2298

Code

1941 2309 18.024

18.030.03

Details of Cost for : 10.00 Nos Description Unit Quantity Details of cost for 10 sluice valves MATERIALS :125mm dia. sluice valves (with cap) each 10.00 Carriage of sluice valves wt. = 56.3x10= 563kg = 0.563t.say 0.56t tonne 0.56 Labour for laying sluice valve Laying S & S or flanged C.I. special such as tees, bends, collars, 5.63 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. Providing flanged joints to double flanged CI pipes:- 125 mm 20.00 diameter pipe. Add water charges @ 1% except on [A]+[B] i.e on

Rate

2600.00 77.67 186.11

165.71 Total: 26043.50

Add C.P & OH @15% except on [A]+[B] i.e on 26303.94 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 3461.15 Rs 3461.15

Item Code: 18.31.2.2 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 125 mm diameter : Class II.

Code

3314 2309

18.024

18.030.03

Details of Cost for : 10.00 Nos Description Unit Quantity Details of cost for 10 sluice valves MATERIALS:125mm dia. sluice valves (with cap) each 10.00 Carriage of sluice valve tonne 0.68 wt.= 68.3x10 = 683 kg = 0.638 t say 0.68 tonne Labour for laying sluice valve Laying S & S or flanged C.I. special such as tees, bends, collars, 6.83 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. Providing flanged joints to double flanged CI pipes:- 125 mm 20.00 diameter pipe. Add water charges @ 1% except on [A]+[B] i.e on

Rate

3200.00 77.67

186.11

165.71 Total: 32052.82

Add C.P & OH @15% except on [A]+[B] i.e on 32373.35 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 4181.47 Rs 4181.45

Item Code: 18.31.3.1 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 150 mm diameter : Class I. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 sluice valves MATERIALS :1942 150mm dia sluice valves (with cap) each 10.00 Carriage of sluice valves 2309 wt. =72.5x10=725kg=0.725t.say 0.72t tonne 0.72

DSR-12

Rate

3410.00 77.67

Page 860 of 2298

18.024

18.030.04

Labour for laying sluice valve Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. Providing flanged joints to double flanged CI pipes:- 150 mm diameter pipe.

7.25

186.11

20.00

192.82

Add water charges @ 1% except on [A]+[B] i.e on

Total: 34155.92

Add C.P & OH @15% except on [A]+[B] i.e on 34497.48 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 4487.78 Rs 4487.75

Item Code: 18.31.3.2 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 150 mm diameter : Class II.

Code

3317 2309 18.024

18.030.04

Details of Cost for : 10.00 Nos Description Unit Quantity Details of cost for 10 sluice valves MATERIALS :150mm dia. sluice valves (with cap) each 10.00 Carriage of sluice valves wt.= 86.5x10=865kg =0.865t. say 0.865t tonne 0.865 Labour for laying sluice valve Laying S & S or flanged C.I. special such as tees, bends, collars, 8.65 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. Providing flanged joints to double flanged CI pipes:- 150 mm 20.00 diameter pipe. Add water charges @ 1% except on [A]+[B] i.e on

Rate

4000.00 77.67 186.11

192.82 Total: 40067.18

Add C.P & OH @15% except on [A]+[B] i.e on 40467.85 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 5200.43 Rs 5200.40

Item Code: 18.31.4.1 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 200 mm diameter : Class I. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 sluice valves MATERIALS :1943 200mm dia,sluice valves (with cap) each 10.00 Carriage of sluice valves 2309 wt.= 121.5x10=1215kg= 1.215t. say 1.22t tonne 1.22 Labour for laying sluice valve 18.024 Laying S & S or flanged C.I. special such as tees, bends, collars, 12.15 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. 18.030.05 Providing flanged joints to double flanged CI pipes:- 200 mm 20.00 diameter pipe.

DSR-12

Rate

6550.00 77.67 186.11

198.63

Page 861 of 2298

Add water charges @ 1% except on [A]+[B] i.e on

Total: 65594.76

Add C.P & OH @15% except on [A]+[B] i.e on 66250.71 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 8242.22 Rs 8242.25

Item Code: 18.31.4.2 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 200 mm diameter : Class II.

Code

3320 2309 18.024

18.030.05

Details of Cost for : 10.00 Nos Description Unit Quantity Details of cost for 10 sluice valves MATERIALS :200mm dia. sluice .valves (with cap) each 10.00 Carriage of sluice valves wt.= 150.5x10=1505kg=1.505t. say 1.5t tonne 1.50 Labour for laying sluice valve Laying S & S or flanged C.I. special such as tees, bends, collars, 15.05 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. Providing flanged joints to double flanged CI pipes:- 200 mm 20.00 diameter pipe. Add water charges @ 1% except on [A]+[B] i.e on

Rate

9100.00 77.67 186.11

198.63 Total: 91116.51

Add C.P & OH @15% except on [A]+[B] i.e on 92027.68 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 11260.54 Rs 11260.60

Item Code: 18.31.5.1 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 250 mm diameter : Class I. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 sluice valves MATERIALS :1944 250mm dia. sluice valves (with cap) each 10.00 Carriage of sluice valves 2309 wt.= 179.9x10=1799kg= 1.799t. say 1.80t tonne 1.80 Labour for laying sluice valve 18.024 Laying S & S or flanged C.I. special such as tees, bends, collars, 17.99 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. 18.030.06 Providing flanged joints to double flanged CI pipes:- 250 mm 20.00 diameter pipe. Add water charges @ 1% except on [A]+[B] i.e on

Rate

9550.00 77.67 186.11

297.19 Total: 95639.81

Add C.P & OH @15% except on [A]+[B] i.e on 96596.21 Cost for 10.00 Nos Rate per Each:

DSR-12

Rs 12037.76

Page 862 of 2298

Rate as per DSR-12:

Rs 12037.80

Item Code: 18.31.5.2 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 250 mm diameter : Class II.

Code

3321 2309 18.024

18.030.06

Details of Cost for : 10.00 Nos Description Unit Quantity Rate Details of cost for 10 sluice valves MATERIALS :250mm dia. sluice valves (with cap) each 10.00 13500.00 Carriage of sluice valves wt. =229.9x10=2299kg =2299t. say 2.30t tonne 2.30 77.67 Labour for laying sluice valve Laying S & S or flanged C.I. special such as tees, bends, collars, 22.99 186.11 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. Providing flanged joints to double flanged CI pipes:- 250 mm 20.00 297.19 diameter pipe. Total: Add water charges @ 1% except on [A]+[B] i.e on 135178.64 Add C.P & OH @15% except on [A]+[B] i.e on 136530.43 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 16723.25 Rs 16723.30

Item Code: 18.31.6.1 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 300 mm diameter : Class I. Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate Details of cost for 10 sluice valves MATERIALS :1945 300mm dia sluice valves (with cap) each 10.00 13500.00 Carriage of sluice valves 2309 wt.= 242.4x10=2424kg = 2.42t. say 2.42t tonne 2.42 77.67 Labour for laying sluice valve 18.024 Laying S & S or flanged C.I. special such as tees, bends, collars, 24.24 186.11 tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. 18.030.07 Providing flanged joints to double flanged CI pipes:- 300 mm 20.00 306.48 diameter pipe. Total: Add water charges @ 1% except on [A]+[B] i.e on 135187.96 Add C.P & OH @15% except on [A]+[B] i.e on 136539.84 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 16766.17 Rs 16766.25

Item Code: 18.31.6.2 P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 300 mm diameter : Class II. Details of Cost for : 10.00 Nos

DSR-12

Page 863 of 2298

Code

3326 2309 18.024

18.030.07

Description Unit Details of cost for 10 sluice valves MATERIALS :300mm dia. sluice, valves (with cap) each Carriage of sluice valves wt.= 303.4x10=3034kg=3.304t. tonne Labour for laying sluice valve Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc. Providing flanged joints to sluice valves with bolts, nuts and rubber insertion etc. Providing flanged joints to double flanged CI pipes:- 300 mm diameter pipe.

Quantity

Rate

10.00

17000.00

3.034

77.67

30.34

186.11

20.00

306.48

Add water charges @ 1% except on [A]+[B] i.e on

Total: 170235.65

Add C.P & OH @15% except on [A]+[B] i.e on 171938.01 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 20950.49 Rs 20950.60

Item Code: 18.32.1 Constructing masonry Chamber 30 x 30 x 50 cm, inside for stop cock, with C.I. surface box :- With F.P.S. bricks.

Code

02.008.01 02.025

04.001.11

06.001.01

13.009.01 1304 9999

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one chamber MATERIALS :(i) Earth work in excavation including refilling and disposal of surplus earth 0.68x0.68x0.65m=0.301cum. E/W excavation in foundation trenches .. .. All kinds of soil. 0.30 Filling available excavated earth (excluding rock) .. .. (ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size) 0.68x0.68x0.075m=0.035cum. Say 0.04 cum. P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag (iii) Second class brick work in cement mortar 1:4 (1 Cement: 4 coarse sand) in foundations and plinth 1.66mx0.115x0.50m=0.095cum. Say 0.10 cum. Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem (iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with a floating coat of neat cement. 1.20x0.50=0.60sqm. 0.30x0.30=0.09sqm. =0.69sqm. Say 0.70sqm. Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. (A) (v) C.I. surface box with hinged cover each 100x100x75mm (inside) (A) (vi) Carriage of C.I. surface box L.S. (vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4 graded stone aggregate 20mm nominal size) in slab = 0.53mx0.53mx0.075m = 0.02107cum. Less surface box 0.112x0.112x0.076

Rate

130.78

0.30

83.80

0.04

3087.47

0.10

3508.25

0.70

173.09

1.00

100.00

1.43

1.49

Page 864 of 2298

0115

=(-)0.00094 cum. = 0.0201 cum. Say 0.02cum. RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Coolie (deduct for not lifting mat. Upto floor v level) day

9999

(A) (viii) Sundries

05.003

L.S.

0.02

5494.55

-0.038

247.00

4.16

1.49 Total: 98.94

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 99.93 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 884.67 Rs 908.95

Item Code: 18.33.1 Constructing masonry Chamber 60 x 60 x 75 cm, inside for sluice valve with CI surface box :- With non modular bricks

Code

02.008.01 02.025

04.001.11

06.001.01

13.009.01 1305 9999

05.003

0115

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one chamber MATERIALS :(i) Earth work in excavation including refilling and disposal of surplus earth 1.21 x 1.21 x 1.00m= 1.464cum. E/W excavation in foundation trenches .. .. All kinds of soil. 1.46 Filling available excavated earth (excluding rock) .. .. (ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size) 1.21xl.21x0.1m=0.146cum. Say 0.15 cum. P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag (iii) Second class brick work in cement mortar 1: 4(1 Cement: 4coarse sand) in foundations and plinth 3.32mx0.23mx0.75m=0.573cum. Say 0.57 cum. Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem (iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with a floating coat of neat cement. 2.40x0.75=1.80sqm 0.60x0.60=0.36sqm. =2.16sqm. Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. (A) (v) C.I. surface box with hinged cover each 100x100x75mm (inside) (A) (vi) Carriage of C.I. surface box L.S. (vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4 graded stone aggregate 20mm nominal size) in slab = 1.06mx1.06mx0.15m = 0.1685 cum. Less surface box 3.142/4xdxd xO. 18m 0.7854x0.156mx0.156mx0.18 = (-)0.0034 cum = 0.1651 cum. Say 0.17 cum. RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Less labour for not lifting material upto floor five level Coolie Day (viii) Mild steel reinforcement for RCC work etc.

Rate

130.78

1.46

83.80

0.15

3087.47

0.57

3508.25

2.16

173.09

1.00

185.00

8.06

1.49

0.17

5494.55

-0.32

247.00

Page 865 of 2298

05.022.01

05.009.03 9999

0.165cum.x80kg/cum. = 13.2kg. Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi (ix) Form work 0.60mx0.60m=0.36sqm.+ 3.32mx0.15m=0.50sqm. = 0.86 sqm. Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi (A) (x) Sundries L.S.

13.20

56.77

0.86

311.22

8.06

1.49 Total: 129.98

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on 131.28 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 5252.03 Rs 5392.90

Item Code: 18.34.1 Constructing masonry Chamber 90 x 90 x 100 cm inside for sluice valve with CI surface box :- With common burnt non-modular bricks Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one chamber MATERIALS :(i) Earth work in excavation including refilling and disposal of surplus earth 1.51X1.51X1.25M 02.008.01 E/W excavation in foundation trenches .. .. All kinds of soil. 2.85 130.78 02.025

04.001.11

06.001.01

13.009.01 1305 9999

05.003

DSR-12

Filling available excavated earth (excluding rock) .. .. (ii) Cement concrete 1:5:10(1 Cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size) 1.51x1.51x0.lm=0.228cum. Say 0.23 cum. P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag (iii) Second class brick work in cement mortar 1:4 (1 Cement: 4coarse sand) in foundations and plinth 4.52mxO.23mx 1.00m= 1.04cum. Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem (iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with a floating coat of neat cement. 3.60mxl.00m=3.60sqm. 0.90mx0.90m=0.81sqm. =4.41 sqm. Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. (A) (v) C.I. surface box with chained lid. each (A) (vi) Carriage of C.I. surface box L.S. (vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4 graded stone aggregate 20mm nominal size) in slab = 1.36mx 1.36mx0.15m = 0.2774 cum. Less surface box 0.7854x0.156mxO. 156mx0.18m = (-)0.0034 cum. = 0.2740 cum. Say 0.27 cum. RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt

2.85

83.80

0.23

3087.47

1.04

3508.25

4.41

173.09

1.00 8.06

185.00 1.49

0.27

5494.55

Page 866 of 2298

Deduct labour for not lifting material upto floor five level 0115

05.022.01

05.009.03 9999

Coolie Day (viii) Mild steel reinforcement for RCC work etc. 0.274cum.x80kg/cum. = 21.92 kg. Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi (ix) Form work 0.90mx0.90m=0.81sqm.+ 4.52mxO.15m = 0.68 sqm. = 1.49 sqm. Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi (A) (x) Sundries L.S.

-0.51

247.00

21.92

56.77

1.49

311.22

8.06

1.49 Total: 83.05

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on 83.88 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 9021.69 Rs 9277.10

Item Code: 18.35.1 Constructing masonry Chamber 120x 120x100 cm, inside for sluice valve, with C.I. surface box :- With F.P.S. bricks.

Code

02.008.01 02.025

04.001.11

06.001.01

13.009.01 1305 9999

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one chamber MATERIALS :(i) Earth work in excavation including refilling and disposal of surplus earth 1.81X1.81X1.25M E/W excavation in foundation trenches .. .. All kinds of soil. 4.10 Filling available excavated earth (excluding rock) .. .. (ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size) 1.81xl.81x0.1m=0.328cum. Say 0.33 cum. P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag (iii) Second class brick work in cement mortar 1:4 (1 Cement: 4coarse sand) in foundations and plinth 5.72mx0.23mxl.00m=1.316cum. Say 1.32 cum. Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem (iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with a floating coat of neat cement. 4.80mxl.00m=4.80sqm. 1.20mxl.20m=1.44sqm. =6.42sqm. Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. (A) (v) C.I. surface box with chained lid. each (A) (vi) Carriage of C.I. surface box L.S. (vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4 graded stone aggregate 20mm nominal size) in slab = 1.66mx 1.66mxO. 15m = 0.4133 cum. Less surface box 0.7854x0.156mx0.156mxO. 18m = (-)0.0034 cum. = 0.4099 cum. Say 0.41 cum.

Rate

130.78

4.10

83.80

0.33

3087.47

1.32

3508.25

6.42

173.09

1.00 8.06

185.00 1.49

Page 867 of 2298

05.003

RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Deduct labour for not lifting material upto floor five level

0115

Coolie Day (viii) Mild steel reinforcement for RCC slab steel @ 80kg/cum.

05.022.01

05.009.03 9999

0.41cum.x80kg/cum. = 32.80kg. Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi (ix) Form work 1.20mxl.20m=1.44sqm.+ 5.72mx0.15m=0.86sqm. = 2.30sqm. Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi (A) (x) Sundries L.S.

0.41

5494.55

-0.77

247.00

32.80

56.77

2.30

311.22

8.06

1.49 Total: 18.83

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on 19.02 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 12493.29 Rs 12866.45

Item Code: 18.36.1 Constructing masonry Chamber 60x 60x75 cm, inside for sluice valve, with C.I. surface box :- With common burnt non-modular bricks Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one chamber MATERIALS :(i) Earth work in excavation including refilling and disposal of surplus earth 1.21X1.21X1.00M = 1.464 cum say 1.46cum 02.008.01 E/W excavation in foundation trenches .. .. All kinds of soil. 1.46 130.78 02.025

04.001.11

06.001.01

13.009.01 1305 9999

DSR-12

Filling available excavated earth (excluding rock) .. .. (ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size) 1.21xl.21x0.1m=0.146cum. Say 0.15 cum. P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag (iii) Second class brick work in cement mortar 1:4 (1 Cement: 4coarse sand) in foundations and plinth 3.32mx0.23mx0.75m=0.573cum. Say 0.57 cum. Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem (iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with a floating coat of neat cement. 2.40mx0.75m=1.80sqm. 0.90mx0.90m=0.36sqm =2.16sqm

1.46

83.80

0.15

3087.47

0.57

3508.25

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. (A) (v) C.I. surface box with chained lid. each (A) (vi) Carriage of C.I. surface box L.S.

2.16

173.09

1.00 53.82

185.00 1.49

Page 868 of 2298

05.003

0115

05.022.01

05.009.03 9999

(vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4 graded stone aggregate 20mm nominal size) in slab = 1.06mx 1.06mx0. 15m = 0.1685 cum. Less surface box 0.61x0.41x0.15m= (-)0.0375 cum =0.131 cum Say:0.13cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Deduct labour for not lifting material upto floor five level Coolie Day (viii) Mild steel reinforcement for RCC slab steel @ 80kg/cum. 0.131cum.x80kg/cum. = 10.48kg. Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi (ix) Form work 0.60mx0.60m=0.36sqm.+ 3.32mx0.15m=0.50sqm. = 0.86sqm. Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi (A) (x) Sundries L.S.

0.13

5494.55

-0.24

247.00

10.48

56.77

0.86

311.22

8.06

1.49 Total: 217.92

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on 220.10 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 4979.99 Rs 5106.65

Item Code: 18.37.1 Constructing masonry chamber 60x45x50 cm inside for water meter C.I. double flap surface box :- With common burnt nonmodular bricks Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one chamber. MATERIALS:(i) Earth work in excavation including refilling and disposal of surplus earth 1.21X1.06X0.85m = 1.09 cum 02.008.01 E/W excavation in foundation trenches .. .. All kinds of soil. 1.09 130.78 02.025

04.001.11

06.001.01

13.009.01

DSR-12

Filling available excavated earth (excluding rock) .. .. (ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size) 1.21 x 1.06x0. lm=0.128cum. Say 0.13 cum. P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Fine sand, 40mmstone ag (iii) Second class brick work in cement mortar 1:4 (1 Cement: 4 coarse sand) in foundations and plinth 3.02mx0.23mx0.50m=0.347cum. Say 0.35 cum. Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem (iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with a floating coat of neat cement. 2.10mx0.50m=l .05sqm. 0.60mx0.45m=0.27sqm. Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

1.09

83.80

0.13

3087.47

0.35

3508.25

1.32

173.09

Page 869 of 2298

1307 9999

05.003

0115

05.022.01

05.009.03 9999

(A) (v) C.I. surface box 400x200x200mm (inside) with locking each arrangement (A) (vi) Carriage of C.I. surface box L.S. (vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4 graded stone aggregate 20 mmnominal size) in slab = 1.06mx0.91mx0.25m = 0.241 cum. Less surface box 0.42x0.22mx0.2m= (-)0.018 cum = 0.223 cum. Say 0.22 cum. RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Deduct labour for not lifting material upto floor five level Coolie Day (viii) Mild steel reinforcement for RCC work steel @ 80kg/cum. 0.223 cum.x80kg/cum. = 17.84 kg. Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi (ix) Form work 0.60mx0.45m=0.27sqm.+ 3.02mx0.25m=0.76sqm. Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi (A) (x) Sundries L.S.

1.00

205.00

13.52

1.49

0.22

5494.55

-0.41

247.00

17.84

56.77

1.03

311.22

8.06

1.49 Total: 135.88

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on 137.24 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 4791.60 Rs 4925.60

Item Code: 18.38.1 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 15 mm diameter pipe.

Code

13.050.03

13.061.01 9999

Details of Cost for : 10.00 m Description Unit Quantity Perimeter = 0.0673 metre Area10x0.0673rn = 0.673sqm. Priming Coat Applying priming coat : With ready mixed red oxide zinc 0.673 chromate primer on steel galvanise Painting two coats excluding priming coat with white paint on new work. Painting with synthetic enamel paint : Two or more coats on Sqm 0.673 new work (A) Add for delay L.S. 13.52 Add water charges @ 1% except on [A]+[B] i.e on

Rate

20.72

53.87 1.49 Total: 20.14

Add C.P & OH @15% except on [A]+[B] i.e on 20.34 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 7.36 Rs 7.35

Item Code: 18.38.2

DSR-12

Page 870 of 2298

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 20 mm diameter pipe.

Code

Description Perimeter = 0.0845 metre Area10x0.0845rn = 0.845sqm.

Details of Cost for : 10.00 m Unit Quantity

Rate

Priming Coat 13.050.03 13.061.01 9999

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise Painting with synthetic enamel paint : Two or more coats on Sqm new work Add for delay L.S.

0.845

20.72

0.845

53.87

13.52

1.49 Total: 20.14

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 20.34 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 8.64 Rs 8.65

Item Code: 18.38.3 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 25 mm diameter pipe. Details of Cost for : 10.00 m Unit Quantity

Code

Description Perimeter = 0.1061 metre Area= 10x0.1061 sqm. = 1.061 sqm Priming coat

13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise Painting with synthetic enamel paint : Two or more coats on Sqm new work Add for delay L.S.

13.061.01 9999

Rate

1.061

20.72

1.061

53.87

20.28

1.49 Total: 30.22

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 30.52 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 11.42 Rs 11.40

Item Code: 18.38.4 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 32 mm diameter pipe.

Code

DSR-12

Description Perimeter = 0.1334 metre Area = 10x0.1334 sqm. = 1.334 sqm. Priming Coat

Details of Cost for : 10.00 m Unit Quantity

Rate

Page 871 of 2298

13.050.03 13.061.01 9999

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise Painting with synthetic enamel paint : Two or more coats on Sqm new work Add for delay L.S.

1.334

20.72

1.334

53.87

20.28

1.49 Total: 30.22

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 30.52 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 13.46 Rs 13.45

Item Code: 18.38.5 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 40 mm diameter pipe.

Code

13.050.03 13.061.01 9999

Details of Cost for : 10.00 m Description Unit Quantity Perimeter = 0.1520 metre Area = 10x0.1520 sqm.= 1.520 sqm. Priming Coat Applying priming coat : With ready mixed red oxide zinc Sqm 1.52 chromate primer on steel galvanise Painting with synthetic enamel paint : Two or more coats on Sqm 1.52 new work Add for delay L.S. 26.91 Add water charges @ 1% except on [A]+[B] i.e on

Rate

20.72 53.87

1.49 Total: 40.10

Add C.P & OH @15% except on [A]+[B] i.e on 40.50 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 16.00 Rs 16.00

Item Code: 18.38.6 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 50mm diameter pipe. Details of Cost for : 10.00 m Unit Quantity

Code

Description Perimeter = 0.1894 metre Area= 10x0.1894 sqm. = 1.894 sqm. Priming Coat

13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm chromate primer on steel galvanise Painting with synthetic enamel paint : Two or more coats on Sqm new work Add for delay L.S.

13.061.01 9999

Rate

1.894

20.72

1.894

53.87

26.91

1.49 Total: 40.10

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 40.50 Cost for 10.00 m

DSR-12

Page 872 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 18.79 Rs 18.80

Item Code: 18.39.1 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe.

Code 14.054.01 9999

Details of Cost for : 10.00 m Description Unit Quantity Painting with synthetic enamel paint - : One or more coats on Sqm 0.673 old work. Add for delay L.S. 8.06

Rate 35.19 1.49 Total: 12.01

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 12.13 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3.76 Rs 3.75

Item Code: 18.39.2 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 20 mm diameter pipe.

Code 14.054.01 9999

Details of Cost for : 10.00 m Description Unit Quantity Painting with synthetic enamel paint - : One or more coats on Sqm 0.845 old work. Add for delay L.S. 8.06

Rate 35.19 1.49 Total: 12.01

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 12.13 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4.37 Rs 4.35

Item Code: 18.39.3 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 25 mm diameter pipe.

Code 14.054.01 9999

Details of Cost for : 10.00 m Description Unit Quantity Painting with synthetic enamel paint - : One or more coats on Sqm 1.061 old work. Add for delay L.S. 10.79 Add water charges @ 1% except on [A] i.e on

Rate 35.19 1.49 Total: 16.08

Add C.P & OH @15% except on [A] i.e on 16.24 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5.60 Rs 5.60

Item Code: 18.39.4

DSR-12

Page 873 of 2298

Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 32 mm diameter pipe.

Code 14.054.01 9999

Details of Cost for : 10.00 m Description Unit Quantity Painting with synthetic enamel paint - : One or more coats on Sqm 1.334 old work. Add for delay L.S. 10.92

Rate 35.19 1.49 Total: 16.27

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 16.43 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 6.58 Rs 6.60

Item Code: 18.39.5 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 40 mm diameter pipe.

Code 14.054.01 9999

Details of Cost for : 10.00 m Description Unit Quantity Painting with synthetic enamel paint - : One or more coats on Sqm 1.52 old work. Add for delay L.S. 13.52

Rate 35.19 1.49 Total: 20.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 20.34 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 7.69 Rs 7.70

Item Code: 18.39.6 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 50 mm diameter pipe.

Code 14.054.01 9999

Details of Cost for : 10.00 m Description Unit Quantity Painting with synthetic enamel paint - : One or more coats on Sqm 1.894 old work. Add for delay L.S. 13.52 Add water charges @ 1% except on [A] i.e on

Rate 35.19 1.49 Total: 20.14

Add C.P & OH @15% except on [A] i.e on 20.34 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 9.00 Rs 9.00

Item Code: 18.40.1 Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 15 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity 13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm 0.673 more coats on new work. 9999 Add for delay L.S. 8.06

DSR-12

Rate 44.56 1.49

Page 874 of 2298

Add water charges @ 1% except on [A] i.e on

Total: 12.01

Add C.P & OH @15% except on [A] i.e on 12.13 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4.39 Rs 4.40

Item Code: 18.40.2 Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 20mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity 13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm 0.845 more coats on new work. 9999 Add for delay L.S. 8.06 Add water charges @ 1% except on [A] i.e on

Rate 44.56 1.49 Total: 12.01

Add C.P & OH @15% except on [A] i.e on 12.13 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5.16 Rs 5.15

Item Code: 18.40.3 Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 25 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity Painting with anti-corrosive paint two coats. 13.065.01 Painting with black anti-corrosive bitumastic paint : Two or 1.061 more coats on new work. 9999 (A) Add for delay L.S. 10.79 Add water charges @ 1% except on [A] i.e on

Rate 44.56 1.49 Total: 16.08

Add C.P & OH @15% except on [A] i.e on 16.24 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 6.60 Rs 6.60

Item Code: 18.40.4 Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 32 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: 13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm 1.334 more coats on new work. 9999 Add for delay L.S. 10.79 Add water charges @ 1% except on [A] i.e on

Rate 44.56 1.49 Total: 16.08

Add C.P & OH @15% except on [A] i.e on 16.24 Cost for 10.00 m Rate per One Metre:

DSR-12

Rs 7.81

Page 875 of 2298

Rate as per DSR-12:

Rs 7.80

Item Code: 18.40.5 Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 40 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: 13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm 1.52 more coats on new work. 9999 Add for delay L.S. 12.22 Add water charges @ 1% except on [A] i.e on

Rate 44.56 1.49 Total: 18.21

Add C.P & OH @15% except on [A] i.e on 18.39 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 8.89 Rs 8.90

Item Code: 18.40.6 Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 50 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: 13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm 1.894 more coats on new work. 9999 Add for delay L.S. 12.22 Add water charges @ 1% except on [A] i.e on

Rate 44.56 1.49 Total: 18.21

Add C.P & OH @15% except on [A] i.e on 18.39 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 10.56 Rs 10.55

Item Code: 18.40.7 Painting GI pipes with anti- corrosive bitumastic paint 65 mm dia pipe. Code 13.065.01 9999

Details of Cost for : 10.00 m Description Unit Quantity Painting with anti-corrosive paint two coats. Painting with black anti-corrosive bitumastic paint : Two or 2.387 more coats on new work. (A) Add for delay L.S. 13.52 Add water charges @ 1% except on [A] i.e on

Rate 44.56 1.49 Total: 20.14

Add C.P & OH @15% except on [A] i.e on 20.34 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 12.98 Rs 12.95

Item Code: 18.40.8 Painting GI pipes with anti- corrosive bitumastic paint 80 mm dia pipe. Details of Cost for : 10.00 m

DSR-12

Page 876 of 2298

Code 13.065.01 9999

Description Unit Painting with anti-corrosive paint two coats. Painting with black anti-corrosive bitumastic paint : Two or more coats on new work. (A) Add for delay L.S.

Quantity

Rate

2.796

44.56

14.82

1.49 Total: 22.08

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 22.30 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 15.02 Rs 15.00

Item Code: 18.41.1 P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -15 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: Width of sand filling = 300mm Depth of sand filling under the pipe=75mm+ Above the pipe = 150mm+ Max. external dia of pipe = 21.8mm = 246.8mm say 247mm Quantity of sand = 10x0.30x0.247 = 0.744' cum. Less for pipe = 3.142/4(0.0218)^2 x10 = (-)0.004 cum. = 0.74 cum. Cost of sand filling for 10 metre pipe 18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum no.18.41.1

Rate

0.74

637.00

Add water charges @ 1% on

Total: 471.38

Add C.P & OH @15% on 476.09 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 54.75 Rs 54.75

Item Code: 18.41.2 P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -20 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: Details of cost of sand filling alround 20mm dia. pipe 10 metre long. Width of sand filling = 300mm Depth of sand filling under the pipe=75mm+ Above the pipe = 150mm+ Max. external dia of pipe = 27.3mm = 252.3 Say 252mm Quantity of sand = 10x0.30x0.252 = 0.756 cum. Less for pipe =3.142/4(0.0273)^2 x10 = (-)0.006cum. = 0.750 cum

DSR-12

Rate

Page 877 of 2298

18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum no.18.41.1

0.75

637.00

Add water charges @ 1% on

Total: 477.75

Add C.P & OH @15% on 482.53 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 55.49 Rs 55.50

Item Code: 18.41.3 P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -25 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: Details of cost of sand filling alround 25mm dia. pipe 10 metre long. Width of sand filling = 300mm Depth of sand filling under the pipe=75mm Above the pipe = 150mm Max. external dia of pipe = 34.2mm = 259.2 Say 259mm Quantity of sand = 10x0.30x0.259 = 0.777 cum. Less for pipe 3.142/4 (0.0342)^2 x 10 = (-)0.009cum. = 0.768 Say 0.77 cum. 18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum no.18.41.1

Rate

0.77

637.00

Add water charges @ 1% on

Total: 490.49

Add C.P & OH @15% on 495.39 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 56.97 Rs 56.95

Item Code: 18.41.4 P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -32 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: Details of cost of sand filling alround 32mm dia. pipe 10 metre long. Width of sand filling = 300mm Depth of sand filling under the pipe=75mm+ Above the pipe = 150mm+ Max. external dia of pipe = 42.9mm = 267.9 Say 268mm Quantity of sand =0x0.30x0.268 =0.804 cum Less for pipe 3.142/4(0.0429) x 10 = (-)0.014cum. = 0.790 Say 0.79 cum.

DSR-12

Rate

Page 878 of 2298

18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum no.18.41.1

0.79

637.00

Add water charges @ 1% on

Total: 503.23

Add C.P & OH @15% on 508.26 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 58.45 Rs 58.45

Item Code: 18.41.5 P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -40 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: Details of cost of sand filling alround 40mm dia. pipe 10 metre long. Width of sand filling = 300mm Depth of sand filling under the pipe=75mm+ Above the pipe = 150mm+ Max. external dia of pipe = 48.8mm = 273.8 Say 274mm Quantity of sand = 10x0.30x0.274 = 0.82cum Less for pipe 3.142/4(0.0488) x10 (-)0.014cum. = 0.801 Say 0.80 cum.’ 18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum no.18.41.1

Rate

0.80

637.00

Add water charges @ 1% on

Total: 509.60

Add C.P & OH @15% on 514.70 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 59.19 Rs 59.20

Item Code: 18.41.6 P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -50 mm diameter pipe Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS: Details of cost of sand filling alround 50mm dia. pipe 10 metre long. Width of sand filling = 300mm Depth of sand filling under the pipe=75mm+ Above the pipe =150mm+ Max. external dia of pipe = 60.8mm = 285.8 Say 286mm Quantity of sand =10x0.30x0.286 =0.858 cum Less for pipe 3.142/4(0.0608) xl0 = (-)0.029cum. = 0.829 Say 0.83 cum. 18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum no.18.41.1

DSR-12

0.83

Rate

637.00

Page 879 of 2298

Add water charges @ 1% on

Total: 528.71

Add C.P & OH @15% on 534.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 61.41 Rs 61.40

Item Code: 18.41.7 P/F sand alround GI pipes 65 mm dia pipe. Details of Cost for : 10.00 m Description Unit Quantity Details of cost of sand filling alround 65mm dia. pipe 10 metre long. Width of sand filling = 300mm Depth of sand filling under the pipe=75mm+ Above the pipe = 150mm+ Max. external dia of pipe = 76.6mm = 301.6 Say 302mm Quantity of sand =10x0.45x0.302 =1.359cum Less for pipe 3.142/4(0.0766) x10 = (-)0.046cum. = 1.313 Say 1.31 cum. Cost of sand filling for 10 metre pipe 18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum 1.31 no.18.41.1 Code

Add water charges @ 1% on

Rate

637.00 Total: 834.47

Add C.P & OH @15% on 842.81 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 96.92 Rs 96.95

Item Code: 18.41.8 P/F sand alround GI pipes 80 mm dia pipe. Details of Cost for : 10.00 m Description Unit Quantity Details of cost of sand filling alround 80mm dia. pipe 10 metre long. Width of sand filling = 300mm Depth of sand filling under the pipe=75mm+ Above the pipe = 150mm+ Max. external dia of pipe = 89.9mm = 314.9 Say 315mm Quantity of sand = 10x0.45x0.315= 1.418 cum.+ Less for pipe 3.142/4(0.0899) x10 = (-)0.0640cum. = 1.354 Say 1.35 cum. Cost of sand filling for 10 metre pipe 18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum 1.35 no.18.41.1 Code

Add water charges @ 1% on

DSR-12

Rate

637.00 Total: 859.95

Page 880 of 2298

Add C.P & OH @15% on 868.55 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 99.88 Rs 99.90

Item Code: 18.41.9 P/F sand alround GI pipes 100 mm dia pipe. Details of Cost for : 10.00 m Description Unit Quantity Details of cost of sand filling alround 100mm dia. pipe 10 metre long. Width of sand filling = 300mm Depth of sand filling under the pipe=75mm+ Above the pipe = 150mm+ Max. external dia of pipe = 115mm = 340mm Quantity of sand = 10x0.45x0.34 = 1.53 cum.+ Less for pipe 3.142/4(0.115)2x10 = (-)0.10 cum. = 1.43 cum. Cost of sand filling for 10 metre pipe 18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum 1.43 no.18.41.1 Code

Add water charges @ 1% on

Rate

637.00 Total: 910.91

Add C.P & OH @15% on 920.02 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 105.80 Rs 105.80

Item Code: 18.41.10 P/F sand alround GI pipes 150 mm dia pipe. Details of Cost for : 10.00 m Description Unit Quantity Details of cost of sand filling alround 150mm dia. pipe 10 metre long. Width of sand filling = 300mm Depth of sand filling under the pipe 75mm+ Above the pipe = 150mm+ Max. external dia of pipe = 166.5mm = 391.50mm Say 0.392m Quantity of sand = 10x0.60x0.392 = 2.35 cum.+ Less for pipe 3.142/4(0.167) x10 = (-)0.22cum. = 2.13 cum. Cost of sand filling for 10 metre pipe 18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum 2.13 no.18.41.1 Code

Add water charges @ 1% on

Rate

637.00 Total: 1356.81

Add C.P & OH @15% on 1370.38 Cost for 10.00 m

DSR-12

Page 881 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 157.59 Rs 157.60

Item Code: 18.42.1 Boring 100 mm dia casing pipe for hand pump /tube well in all soils Upto 6 m depth. Details of Cost for : 6.00 m Code Description Unit Quantity LABOUR For boring and removing the pipe0116 Fitter Day 0.50 0114 Beldar Day 3.00 0010 Hire charges for derick monkey rope and other accessories Day 0.50

301.00 247.00 775.00

1472

0.12

335.00

13.52

1.49 Total: 1339.34

9999

Depreciation @ 2% of the cost of casing pipe 6metre @ Rs. per metre Sundries

metre L.S.

Add water charges @ 1% on

Rate

Add C.P & OH @15% on 1352.73 Cost for 6.00 m Rate per One Metre: Rate as per DSR-12:

Rs 259.27 Rs 259.25

Item Code: 18.42.2 Boring 100 mm dia casing pipe for hand pump /tube well in all soils Beyond 6 to 12 m depth. Details of Cost for : 6.00 m Code Description Unit Quantity LABOUR For boring and removing the pipe0116 Fitter Day 0.62 0114 Beldar Day 3.50 0010 Hire charges for derick monkey rope and other accessories Day 0.62

301.00 247.00 775.00

1472

0.12

335.00

13.52

1.49 Total: 1591.96

9999

Depreciation @ 2% of the cost of casing pipe 6metre @ Rs. metre per metre Sundries L.S.

Add water charges @ 1% on

Rate

Add C.P & OH @15% on 1607.88 Cost for 6.00 m Rate per One Metre: Rate as per DSR-12:

Rs 308.18 Rs 308.20

Item Code: 18.42.3 Boring 100 mm dia casing pipe for hand pump /tube well in all soils Beyond 12 to 18 m depth. Details of Cost for : 6.00 m Code Description Unit Quantity LABOUR For boring and removing the pipe0116 Fitter Day 0.75 0114 Beldar Day 4.00 0010 Hire charges for derick monkey rope and other accessories Day 0.75

DSR-12

Rate

301.00 247.00 775.00

Page 882 of 2298

1472 9999

Depreciation @ 2% of the cost of casing pipe 6metre @ Rs. metre per metre Sundries L.S.

0.12

335.00

13.52

1.49 Total: 1855.34

Add water charges @ 1% on

Add C.P & OH @15% on 1873.89 Cost for 6.00 m Rate per One Metre: Rate as per DSR-12:

Rs 359.16 Rs 359.15

Item Code: 18.43 P/P in position filter of 40 mm dia. Code

1882 9999 0116 0114 9999

Description Details of cost for one strainer 1.5 long MATERIALS Cost of strainer 40mm diameter 1.5m long Carriage to site LABOUR: Fitter Beldar Sundreis including hamp white lead etc.

Details of Cost for : 1.50 m Unit Quantity

Rate

each L.S.

1.00 13.52

495.00 1.49

Day Day L.S.

0.17 0.17 7.15

301.00 247.00 1.49 Total: 618.95

Add water charges @ 1% on

Add C.P & OH @15% on 625.14 Cost for 1.50 m Rate per One Metre: Rate as per DSR-12:

Rs 479.27 Rs 479.25

Item Code: 18.44 P/F to filter 40 mm dia GI pipe for tube well. Code

1549 2271 9999 0116 0114 9999

Description Details of cost for a depth of 10 metre MATERIALS: (A) 40mm G.I. pipe (A) carriage of 40mm pipe(36.5kg) Added 2% wastage and fitting in “A” White lead, hamp and oil etc. Fitter Beldar Sundries

Details of Cost for : 10.00 m Unit Quantity

metre tonne L.S. Day Day L.S.

Rate

10.20 0.0372

202.00 77.87

6.76 0.33 0.75 7.25

1.49 301.00 247.00 1.49 Total: 2368.75

Add water charges @ 1% on

Add C.P & OH @15% on 2392.44 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 275.13 Rs 275.15

Item Code: 18.45 P/P in position hand pump for 40 mm dia.

DSR-12

Page 883 of 2298

Code

1693 9999 0116 0114 9999

Description Details of cost for one pump MATERIALS: Cost of hand pump Carriage LABOUR: Fitter Beldar Sundries

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 13.52

550.00 1.49

Day Day L.S.

0.10 0.10 4.42

301.00 247.00 1.49 Total: 631.53

Add water charges @ 1% on

Add C.P & OH @15% on 637.85 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 733.53 Rs 733.55

Item Code: 18.46.1 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) : 15 mm nominal bore

Code 1641 9999

Description GI union - 15mm nominal bore. Carriage of materials and sundries

0116 0114

Fitter grade-I Beldar

Details of Cost for : 1.00 No. Unit Quantity each 1.00 L.S. Day Day

1.82 0.11 0.11

Add water charges @ 1% on

Rate 40.00 1.49 301.00 247.00 Total: 102.99

Add C.P & OH @15% on 104.02 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 119.62 Rs 119.60

Item Code: 18.46.2 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 20 mm nominal bore

Code 1642 9999

Description GI union - 20mm nominal bore. Carriage of materials and sundries

0116 0114

Fitter grade-I Beldar

Details of Cost for : 1.00 No. Unit Quantity each 1.00 L.S. Day Day

1.82 0.11 0.11

Add water charges @ 1% on

Rate 60.00 1.49 301.00 247.00 Total: 122.99

Add C.P & OH @15% on 124.22 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 142.85 Rs 142.85

Page 884 of 2298

Item Code: 18.46.3 P/F GI union in GI pipes :- 25 mm nominal bore. Code

Description

1643 9999

MATERIALS: G.I. Union 25 mm nominal bore Carriage of materials and sundries

0116 0114

LABOUR : Fitter grade-I Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

70.00

L.S.

1.82

1.49

Day Day

0.11 0.11

301.00 247.00 Total: 132.99

Add water charges @ 1% on

Add C.P & OH @15% on 134.32 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 154.47 Rs 154.45

Item Code: 18.46.4 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) 32 mm nominal bore

Code 1644 9999 0116 0114

Description MATERIALS: 32mm nominal bore . Carriage of materials and sundries LABOUR: Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 1.82

100.00 1.49

Day Day

0.11 0.11

301.00 247.00 Total: 162.99

Add water charges @ 1% on

Add C.P & OH @15% on 164.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 189.31 Rs 189.30

Item Code: 18.46.5 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) 40 mm nominal bore

Code 1645 9999 0116 0114

Description MATERIAL G.I. Union 40 mm nominal bore Carriage of materials and sundries LABOUR: Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 1.82

135.00 1.49

Day Day

0.11 0.11

301.00 247.00 Total: 197.99

Add water charges @ 1% on

Add C.P & OH @15% on 199.97 Cost for 1.00 No. Rate per Each:

DSR-12

Rs 229.97

Page 885 of 2298

Rate as per DSR-12:

Rs 229.95

Item Code: 18.46.6 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) 50 mm nominal bore

Code 1646 9999 0116 0114

Description MATERIALS: 50mm nominal bore. Carriage of materials and sundries LABOUR: Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 1.82

180.00 1.49

Day Day

0.15 0.15

301.00 247.00 Total: 264.91

Add water charges @ 1% on

Add C.P & OH @15% on 267.56 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 307.69 Rs 307.70

Item Code: 18.46.7 P/F GI union in GI pipes :- 65 mm nominal bore. Code

1647 9999 0116 0114

Description Details of cost for one no. MATERIALS: 65m.m nominal bore Carriage of materials and sundries LABOURS Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 1.82

390.00 1.49

Day Day

0.15 0.15

301.00 247.00 Total: 474.91

Add water charges @ 1% on

Add C.P & OH @15% on 479.66 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 551.61 Rs 551.60

Item Code: 18.46.8 P/F GI union in GI pipes :- 80 mm nominal bore. Code

1648 9999 0116 0114

DSR-12

Description Details of cost for one no. MATERIALS: 80mm nominal bore Carriage of materials and sundries LABOURS Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 1.82

480.00 1.49

Day Day

0.15 0.15

Add water charges @ 1% on

301.00 247.00 Total: 564.91

Add C.P & OH @15% on

570.56

Page 886 of 2298

Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 656.14 Rs 656.15

Item Code: 18.47.1 P/F G.I. Union in existing G.I. pipe line, cutting and threading including excavation, refilling ...complete wherever required : 15 mm nominal bore. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 1641 GI union - 15mm nominal bore. each 1.00 40.00 9999 Carriage of materials and sundries L.S. 1.82 1.49 LABOUR: 0116 Fitter grade-I Day 0.33 301.00 0114 Beldar Day 0.33 247.00 Total: Add water charges @ 1% on 223.55 Add C.P & OH @15% on 225.79 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 259.66 Rs 259.65

Item Code: 18.47.2 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 20mm nominal bore

Code

Description

1642 9999

MATERIALS: GI union - 20mm nominal bore. Carriage of materials and sundries

0116 0114

LABOUR: Fitter grade-I Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

60.00

L.S.

1.82

1.49

Day Day

0.33 0.33

301.00 247.00 Total: 243.55

Add water charges @ 1% on

Add C.P & OH @15% on 245.99 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 282.89 Rs 282.90

Item Code: 18.47.3 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 25 mm nominal bore

Code

DSR-12

Description

1643 9999

MATERIALS: GI union - 25mm nominal bore. Carriage of materials and sundries

0116

LABOUR: Fitter grade-I

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

70.00

L.S.

1.82

1.49

Day

0.33

301.00

Page 887 of 2298

0114

Beldar

Day

0.33

Add water charges @ 1% on

247.00 Total: 253.55

Add C.P & OH @15% on 256.09 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 294.50 Rs 294.50

Item Code: 18.47.4 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 32 mm nominal bore

Code 1644 9999 0116 0114

Description MATERIALS: GI union - 32mm nominal bore. Carriage of materials and sundries LABOUR: Fitter grade-I Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 1.82

100.00 1.49

Day Day

0.33 0.33

301.00 247.00 Total: 283.55

Add water charges @ 1% on

Add C.P & OH @15% on 286.39 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 329.35 Rs 329.35

Item Code: 18.47.5 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 40 mm nominal bore

Code

Description

1645 9999

MATERIALS: GI union - 40mm nominal bore. Carriage of materials and sundries

0116 0114

LABOUR: Fitter grade-I Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

135.00

L.S.

1.82

1.49

Day Day

0.33 0.33

301.00 247.00 Total: 318.55

Add water charges @ 1% on

Add C.P & OH @15% on 321.74 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 370.00 Rs 370.00

Item Code: 18.47.6 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) -50 mm nominal bore

Code

Description

Details of Cost for : 1.00 No. Unit Quantity

Rate

MATERIALS:

DSR-12

Page 888 of 2298

1646 9999

GI union - 50mm nominal bore. Carriage of materials and sundries

0116 0114

LABOUR: Fitter grade-I Beldar

each

1.00

180.00

L.S.

1.82

1.49

Day Day

0.45 0.45

301.00 247.00 Total: 429.31

Add water charges @ 1% on

Add C.P & OH @15% on 433.60 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 498.64 Rs 498.65

Item Code: 18.47.7 P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) 15 mm nominal bore

Code 1647 9999 0116 0114

Description MATERIALS: 65mm nominal bore Carriage of material and sundries LABOUR: Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 1.82

390.00 1.49

Day Day

0.45 0.45

301.00 247.00 Total: 639.31

Add water charges @ 1% on

Add C.P & OH @15% on 645.70 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 742.56 Rs 742.55

Item Code: 18.47.8 P/F GI Union in existing GI pipe line 80 mm nominal bore. Code

1648 9999 0116 0114

Description Details of cost for one no. MATERIALS: 80mm nominal bore Carriage of material and sundries LABOUR: Fitter Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 1.82

480.00 1.49

Day Day

0.45 0.45

301.00 247.00 Total: 729.31

Add water charges @ 1% on

Add C.P & OH @15% on 736.60 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 847.09 Rs 847.10

Item Code: 18.48

DSR-12

Page 889 of 2298

Prdgand placing on terrace polyethylene water storage tank ISI : 12701 ....but without fittings and the base support for tank

Code

Description

1649 9999

MATERIALS: Polyeethylene water storage tank Carriage to site

9999

Placing at terrace

Details of Cost for : 500.00 Ltr Unit Quantity

Rate

per l

500.00

4.45

L.S.

179.40

1.49

L.S.

89.70

1.49 Total: 2625.96

Add water charges @ 1% on

Add C.P & OH @15% on 2652.22 Cost for 500.00 Ltr Rate per One Litre: Rate as per DSR-12:

Rs 6.10 Rs 6.10

Item Code: 18.49.1 P/F C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7257 15mm diameter C.P. brass bib cock each 1.00 9999 Carriage of material and fixing changes L.S. 11.57 Add water charges @ 1% on

Rate 325.00 1.49 Total: 342.24

Add C.P & OH @15% on 345.66 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 397.51 Rs 397.50

Item Code: 18.50.1 P/F C.P. long brass bib cock of approved quality conforming to ISstandards and weighing not less than 810 gms -15 mm nominal bore. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7258 CP brass 15mm dia long nose bib cock each 1.00 330.00 9999 Carriage of material and fixing changes L.S. 16.25 1.49 Total: Add water charges @ 1% on 354.21 Add C.P & OH @15% on 357.75 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 411.41 Rs 411.40

Item Code: 18.51.1 P/F C.P. brass long body bib cock of approved quality conforming to ISstandards and weighing not less than 690 gms. 15 mm nominal bore. Details of Cost for : 1.00 No.

DSR-12

Page 890 of 2298

Code

7259 9999

Description Details of cost for one no. Materials: 15mm diameter C.P. brass long body bib cock Carriage of material and fixing changes

Unit

Quantity

Rate

each L.S.

1.00 13.91

350.00 1.49 Total: 370.73

Add water charges @ 1% on

Add C.P & OH @15% on 374.44 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 430.61 Rs 430.60

Item Code: 18.52.1 P/F C.P. brass stop cock of approved quality conforming to IS:8931 15 mm nominal bore. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7260 15mm dia CP brass stop cock (concealed) each 1.00 9999 Carriage of material and fixing changes L.S. 11.57 Add water charges @ 1% on

Rate 350.00 1.49 Total: 367.24

Add C.P & OH @15% on 370.91 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 426.55 Rs 426.55

Item Code: 18.53.1 P/F C.P. brass angle valve for basin mixer and geyser points- conforming to IS:8931 a) 15 mm nominal bore Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7261 CP brass angle valve each 1.00 9999 Carriage of material and fixing changes L.S. 11.31 Add water charges @ 1% on

Rate 370.00 1.49 Total: 386.85

Add C.P & OH @15% on 390.72 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 449.33 Rs 449.35

Item Code: 18.54.1 P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long. Wt. not less than 88 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7400 PTMT bib cock - 15mm dia each 1.00 100.00 9999 Carriage of material and fixing changes L.S. 8.06 1.49 Total:

DSR-12

Page 891 of 2298

Add water charges @ 1% on

112.01

Add C.P & OH @15% on 113.13 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 130.10 Rs 130.10

Item Code: 18.54.2 P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 122mm long. Wt. not less than 99 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7401 15mm dia PTMT bibcock (122mm long) each 1.00 140.00 9999 Carriage of material and fixing changes L.S. 8.06 1.49 Total: Add water charges @ 1% on 152.01 Add C.P & OH @15% on 153.53 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 176.56 Rs 176.55

Item Code: 18.54.3 P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 165 mm long. Wt. not less than 110 gms.

Code 7402 9999

Description MATERIALS: 15mm dia PTMT bibcock (180mm long) Carriage of material and fixing changes

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

160.00

L.S.

8.06

1.49 Total: 172.01

Add water charges @ 1% on

Add C.P & OH @15% on 173.73 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 199.79 Rs 199.80

Item Code: 18.54.4 P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 90mm long. Wt. not less than 93 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7859 PTMT Bib Cock with nozzle 15 mm each 1.00 133.00 9999 Carriage of material and fixing changes L.S. 8.06 1.49 Total: Add water charges @ 1% on 145.01 Add C.P & OH @15% on 146.46 Cost for 1.00 No.

DSR-12

Page 892 of 2298

Rate per Each: Rate as per DSR-12:

Rs 168.43 Rs 168.45

Item Code: 18.55.1 P/F PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Wt. not less than 88 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7403 15 mm dia PTMT stop cock (male each 1.00 100.00 9999 Carriage of material and fixing changes L.S. 8.06 1.49 Total: Add water charges @ 1% on 112.01 Add C.P & OH @15% on 113.13 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 130.10 Rs 130.10

Item Code: 18.55.2 P/F PTMT bib cock of approved quality and colour. 20mm nominal bore, 89mm long. Wt. not less than 88 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7405 20 mm dia. PTMT stop cock each 1.00 130.00 9999 Carriage of material and fixing changes L.S. 8.06 1.49 Total: Add water charges @ 1% on 142.01 Add C.P & OH @15% on 143.43 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 164.94 Rs 164.95

Item Code: 18.55.3 P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 108mm long. Wt. not less than 108 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7861 PTMT Stop Cock (concealed)15 mm each 1.00 173.00 9999 Carriage of material and fixing changes L.S. 8.06 1.49 Total: Add water charges @ 1% on 185.01 Add C.P & OH @15% on 186.86 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 214.89 Rs 214.90

Item Code: 18.56.1

DSR-12

Page 893 of 2298

P/F PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Wt. not less than 110 gms.

Code 7406 9999

Description MATERIALS: PTMT - Pillar cock - 15mm dia. Carriage of material and fixing changes

Details of Cost for : 1.00 No. Unit Quantity

Rate

each

1.00

160.00

L.S.

9.49

1.49 Total: 174.14

Add water charges @ 1% on

Add C.P & OH @15% on 175.88 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 202.26 Rs 202.25

Item Code: 18.56.2 P/F PTMT pillar cock of approved quality and colour. 15mm nominal bore, 125mm long foam flow. Wt. not less than 120 gms.

Code 7410 9999

Description MATERIALS: PTMT Pillar cock (fancy) 15mm foam flow. Carriage of material and fixing changes

Details of Cost for : 1.00 No. Unit Quantity Nos L.S.

1.00 9.49

Add water charges @ 1% on

Rate 225.00 1.49 Total: 239.14

Add C.P & OH @15% on 241.53 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 277.76 Rs 277.25

Item Code: 18.57.1 P/F PTMT push cock of approved quality and colour. 15mm nominal bore, 98mm long. Wt. not less than 75 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7407 PTMT push cock 15 mm dia. each 1.00 90.00 9999 Carriage of material and fixing changes L.S. 8.06 1.49 Total: Add water charges @ 1% on 102.01 Add C.P & OH @15% on 103.03 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 118.48 Rs 118.50

Item Code: 18.57.2 P/F PTMT push cock of approved quality and colour. 15mm nominal bore, 80mm long. Wt. not less than 46 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7408 PTMT push cock 12 mm dia. 20 mm each 1.00 80.00

DSR-12

Page 894 of 2298

9999

Carriage of material and fixing changes L.S.

8.06

Add water charges @ 1% on

1.49 Total: 92.01

Add C.P & OH @15% on 92.93 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 106.87 Rs 106.85

Item Code: 18.58.1.1 P/F PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7409 PTMT grating 100 mm dia. each 1.00 9999 Carriage of material and fixing changes L.S. 4.16 Add water charges @ 1% on

Rate 31.00 1.49 Total: 37.20

Add C.P & OH @15% on 37.57 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 43.21 Rs 43.20

Item Code: 18.58.1.2 P/F PTMT grating of approved quality and colour. Circular type. 125 mm nominal dia with 25 mm waste hole. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7411 125 mm grating with waste hole each 1.00 9999 Carriage of material and fixing changes L.S. 4.16 Add water charges @ 1% on

Rate 37.00 1.49 Total: 43.20

Add C.P & OH @15% on 43.63 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 50.17 Rs 50.15

Item Code: 18.58.2.1 P/F PTMT grating of app. quality and colour. Rect. type with openable circular lid. 150 mm size square 100 mm dia. of the inner hinged round grating. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7412 Rectangular type with openable each 1.00 101.00 9999 Carriage of material and fixing changes L.S. 4.16 1.49 Total: Add water charges @ 1% on 107.20

DSR-12

Page 895 of 2298

Add C.P & OH @15% on 108.27 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 124.51 Rs 124.50

Item Code: 18.59.1 P/F C.I. double acting air valve of approved quality : 50 mm dia. Code

7415 9999 9999

18.030.01

Description Details of cost for 10 no. double acting air valves MATERIALS: 50mm dia, double acting air valve Carriage of air valves Labour for faying double acting air valve Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. Providing flanged joints to double flanged CI pipes:- 80 mm diameter pipe.

Details of Cost for : 10.00 Nos Unit Quantity

each L.S. L.S.

Rate

10.00 26.00 39.00

3370.00 1.49 1.49

10.00

92.66

Add water charges @ 1% except on [A] i.e on

Total: 33796.85

Add C.P & OH @15% except on [A] i.e on 34134.82 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 4018.16 Rs 4018.15

Item Code: 18.59.2 P/F C.I. double acting air valve of approved quality : 80 mm dia. Code

7416 9999 9999

18.030.01

Description Details of cost for 10 no. double acting air valves MATERIALS: 80mm dia, double acting air valve Carriage of air valves Labour for faying double acting air valve Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. Providing flanged joints to double flanged CI pipes:- 80 mm diameter pipe.

Details of Cost for : 10.00 Nos Unit Quantity

each L.S. L.S.

Rate

10.00 26.00 39.00

4930.00 1.49 1.49

10.00

92.66

Add water charges @ 1% except on [A] i.e on

Total: 49396.85

Add C.P & OH @15% except on [A] i.e on 49890.82 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 5830.10 Rs 5830.10

Item Code: 18.59.3 P/F C.I. double acting air valve of approved quality : 100 mm dia. Code

7417

DSR-12

Description Details of cost for 10 no. double acting air valves MATERIALS: 100mm dia, double acting air valve

Details of Cost for : 10.00 Nos Unit Quantity

each

10.00

Rate

6400.00

Page 896 of 2298

9999 9999

18.030.02

Carriage of air valves L.S. Labour for laying double acting air valve L.S. Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. Providing flanged joints to double flanged CI pipes:- 100 mm diameter pipe.

26.00 52.00

1.49 1.49

10.00

155.26

Add water charges @ 1% except on [A] i.e on

Total: 64116.22

Add C.P & OH @15% except on [A] i.e on 64757.38 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 7602.36 Rs 7602.35

Item Code: 18.60.1 P/F enclosed type water meter (bulk type) conforming to IS: 2373 and tested by MB : 80 mm dia nominal bore. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one no. water meter MATERIALS: 7418 80mm dia. water meter each 1.00 2030.00 9999 Testing charges L.S. 130.00 1.49 9999 Carriage of water meter L.S. 26.00 1.49 9999 Labour for faying water meter L.S. 39.00 1.49 Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. 18.030.01 Providing flanged joints to double flanged CI pipes:- 80 mm 2.00 92.66 diameter pipe. Total: Add water charges @ 1% except on [A] i.e on 2320.55 Add C.P & OH @15% except on [A] i.e on 2343.76 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2880.64 Rs 2880.60

Item Code: 18.60.2 P/F enclosed type water meter (bulk type) conforming to IS: 2373 and tested by MB : 100 mm dia nominal bore.

Code

7419 9999 9999 9999

18.030.02

Description Details of cost for one no. water meter MATERIALS: 100mm dia. water meter Testing charges Carriage of water meter Labour for faying water meter Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. Providing flanged joints to double flanged CI pipes:- 100 mm diameter pipe.

Details of Cost for : 1.00 No. Unit Quantity

each L.S. L.S. L.S.

Rate

1.00 130.00 26.00 52.00

3150.00 1.49 1.49 1.49

2.00

155.26

Add water charges @ 1% except on [A] i.e on

Total: 3459.92

Add C.P & OH @15% except on [A] i.e on 3494.52 Cost for 1.00 No.

DSR-12

Page 897 of 2298

Rate per Each: Rate as per DSR-12:

Rs 4329.22 Rs 4329.20

Item Code: 18.60.3 P/F enclosed type water meter (bulk type) conforming to IS: 2373 and tested by MB : 150 mm dia nominal bore.

Code

7420 9999 9999 9999

18.030.04

Description Details of cost for one no. water meter valves MATERIALS: 80mm dia. water meter Testing charges Carriage of water meter Labour for faying water meter Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. Providing flanged joints to double flanged CI pipes:- 150 mm diameter pipe.

Details of Cost for : 1.00 No. Unit Quantity

each L.S. L.S. L.S.

Rate

1.00 156.00 39.00 65.00

4560.00 1.49 1.49 1.49

2.00

192.82

Add water charges @ 1% except on [A] i.e on

Total: 4947.40

Add C.P & OH @15% except on [A] i.e on 4996.87 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6132.04 Rs 6132.00

Item Code: 18.60.4 P/F enclosed type water meter (bulk type) conforming to IS: 2373 and tested by MB : 200 mm dia nominal bore.

Code

7421 9999 9999 9999

18.030.05

Description Details of cost for one no. water meter MATERIALS: 200mm dia. water meter Testing charges Carriage of water meter Labour for faying water meter Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. Providing flanged joints to double flanged CI pipes:- 200 mm diameter pipe.

Details of Cost for : 1.00 No. Unit Quantity

each L.S. L.S. L.S.

Rate

1.00 156.00 52.00 104.00

5100.00 1.49 1.49 1.49

2.00

198.63

Add water charges @ 1% except on [A] i.e on

Total: 5564.88

Add C.P & OH @15% except on [A] i.e on 5620.53 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6860.87 Rs 6860.90

Item Code: 18.61.1 P/F CI dirt box strainer for bulk type water conforming to IS : 2373 : 80 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one no. dirt box strainer

DSR-12

Rate

Page 898 of 2298

7422 9999 9999

18.030.01

MATERIALS: Dirt box strainer 80 mm Carriage of dirt box strainer Labour for faying dirt box strainer Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. Providing flanged joints to double flanged CI pipes:- 80 mm diameter pipe.

each L.S. L.S.

1.00 26.00 39.00

2620.00 1.49 1.49

Nos

2.00

92.66

Add water charges @ 1% except on [A] i.e on

Total: 2716.85

Add C.P & OH @15% except on [A] i.e on 2744.02 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3340.94 Rs 3340.90

Item Code: 18.61.2 P/F CI dirt box strainer for bulk type water conforming to IS : 2373 : 100 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one no. dirt box strainer MATERIALS: 7423 100mm dia. dirt box strainer each 1.00 9999 Carriage of dirt box strainer L.S. 26.00 9999 Labour for faying dirt box strainer L.S. 52.00 Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. 18.030.02 Providing flanged joints to double flanged CI pipes:- 100 mm 2.00 diameter pipe. Add water charges @ 1% except on [A] i.e on

Rate

4180.00 1.49 1.49

155.26 Total: 4296.22

Add C.P & OH @15% except on [A] i.e on 4339.18 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 5300.58 Rs 5300.55

Item Code: 18.61.3 P/F CI dirt box strainer for bulk type water conforming to IS : 2373 : 150 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one no. dirt box strainer MATERIALS: 7424 150mm dia. dirt box strainer each 1.00 9999 Carriage of dirt box strainer L.S. 39.00 9999 Labour for faying dirt box strainer L.S. 65.00 Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. 18.030.04 Providing flanged joints to double flanged CI pipes:- 150 mm 2.00 diameter pipe. Add water charges @ 1% except on [A] i.e on

Rate

5420.00 1.49 1.49

192.82 Total: 5574.96

Add C.P & OH @15% except on [A] i.e on 5630.71 Cost for 1.00 No.

DSR-12

Page 899 of 2298

Rate per Each: Rate as per DSR-12:

Rs 6860.96 Rs 6860.90

Item Code: 18.61.4 P/F CI dirt box strainer for bulk type water conforming to IS : 2373 : 200 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost for one no. dirt box strainer MATERIALS: 7425 200mm dia. dirt box strainer each 1.00 9999 Carriage of dirt box strainer L.S. 52.00 9999 Labour for faying dirt box strainer L.S. 104.00 Providing flanged joints to double acting air valves with bolts, nuts and rubber insertions etc. 18.030.05 Providing flanged joints to double flanged CI pipes:- 200 mm 2.00 diameter pipe. Add water charges @ 1% except on [A] i.e on

Rate

7550.00 1.49 1.49

198.63 Total: 7782.44

Add C.P & OH @15% except on [A] i.e on 7860.26 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 9436.56 Rs 9436.60

Item Code: 18.62.1 P/F PTMT Ball cock of -complete with Epoxy coated- with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Wt. not less than 138 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7495 Ball Cock 15 mm complete with each 1.00 134.00 9999 Carriage of material and fixing changes L.S. 21.58 1.49 Total: Add water charges @ 1% on 166.15 Add C.P & OH @15% on 167.81 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 192.98 Rs 193.00

Item Code: 18.62.2 P/F PTMT Ball cock of -complete with Epoxy coated- with L.P./ H.P.H.D. plastic ball. 20 mm nominal bore, 120 mm long. Wt. not less than 198 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7496 Ball Cock 20 mm complete with each 1.00 195.00 9999 Carriage of material and fixing changes L.S. 26.91 1.49 Total: Add water charges @ 1% on 235.10 Add C.P & OH @15% on 237.45 Cost for 1.00 No.

DSR-12

Page 900 of 2298

Rate per Each: Rate as per DSR-12:

Rs 273.07 Rs 273.05

Item Code: 18.62.3 P/F PTMT Ball cock of -complete with Epoxy coated- with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long. Wt. not less than 440 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7497 Ball Cock 25 mm complete with each 1.00 420.00 9999 Carriage of material and fixing changes L.S. 32.24 1.49 Total: Add water charges @ 1% on 468.04 Add C.P & OH @15% on 472.72 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 543.63 Rs 543.65

Item Code: 18.62.4 P/F PTMT Ball cock of -complete with Epoxy coated- with L.P./ H.P.H.D. plastic ball. 40mm nominal bore, 206mm long. Wt. not less than 690 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7498 Ball Cock 40 mm complete with E each 1.00 780.00 9999 Carriage of material and fixing changes L.S. 32.24 1.49 Total: Add water charges @ 1% on 828.04 Add C.P & OH @15% on 836.32 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 961.77 Rs 961.75

Item Code: 18.62.5 P/F P.T.M.T ball cock : 50 mm nominal bore, 242 mm long, weighing 1240 Grams. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7499 Ball Cock 50mm Complete with Epoxy each 1.00 Coated Aluminium Road & H.D. Ball 9999 Carriage of materials and fixing charges L.S. 32.24 Add water charges @ 1% on

Rate 1150.00 1.49 Total: 1198.04

Add C.P & OH @15% on 1210.02 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 1391.52 Rs 1391.50

Page 901 of 2298

Item Code: 18.63 P/F PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7500 Angle Stop cock with Flenge 15 Each 1.00 9999 Carriage of material and fixing changes L.S. 8.06 Add water charges @ 1% on

Rate 130.00 1.49 Total: 142.01

Add C.P & OH @15% on 143.43 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 164.94 Rs 164.95

Item Code: 18.64 P/F PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7501 Swiveling shower 15 mm Each 1.00 9999 Carriage of material and fixing changes L.S. 6.76 Add water charges @ 1% on

Rate 87.00 1.49 Total: 97.07

Add C.P & OH @15% on 98.04 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 112.75 Rs 112.75

Item Code: 18.65 P/F PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7509 Soap dish/holder 138 x 102 x 7 Each 1.00 120.00 9999 Carriage of material and fixing changes L.S. 6.76 1.49 Total: Add water charges @ 1% on 130.07 Add C.P & OH @15% on 131.37 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 151.08 Rs 151.10

Item Code: 18.66.1 P/L S&S C.I.standard specials such as teea, bends, collars, tapers and caps etc. suitable as per IS : 1538: Upto 300 mm diametre. Details of Cost for : 1.00 Qtl

DSR-12

Page 902 of 2298

Code 7708 2309 18.024

Description Unit MATERIALS :Cost of specials Quint Carriage of materials tonne LABOUR Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.

Quantity

Rate

1.00 0.10

5850.00 77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total: 5857.77

Add C.P & OH @15% except on [A] i.e on 5916.35 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 6989.91 Rs 6989.95

Item Code: 18.66.2 P/L S&S C.I.standard specials such as teea, bends, collars, tapers and caps etc. suitable as per IS : 1538: Above 300 mm diametre.

Code 7709 2309 18.024

Description

Details of Cost for : 1.00 Qtl Unit Quantity

MATERIALS :Cost of specials Quint Carriage of materials tonne LABOUR Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.

Rate

1.00 0.10

7500.00 77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total: 7507.77

Add C.P & OH @15% except on [A] i.e on 7582.85 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 8906.39 Rs 8906.40

Item Code: 18.67.1 P/L S&S C.I. standard specials suitable for mechanical joint- ing as per IS : 13382: Upto 300 mm diametre. Details of Cost for : 1.00 Qtl Code Description Unit Quantity MATERIALS :7710 Cost of specials Quint 1.00 2309 Carriage of materials tonne 0.10 LABOUR 18.024 Laying S & S or flanged C.I. special such as tees, bends, collars, 1.00 tapers and caps etc. Add water charges @ 1% except on [A] i.e on

Rate 8200.00 77.67 186.11 Total: 8207.77

Add C.P & OH @15% except on [A] i.e on 8289.85 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 9719.44 Rs 9719.45

Item Code: 18.67.2 P/L S&S C.I. standard specials suitable for mechanical joint- ing as per IS : 13382: Above 300 mm diametre.

DSR-12

Page 903 of 2298

Code 7711 2309 18.024

Description

Details of Cost for : 1.00 Qtl Unit Quantity

MATERIALS :Cost of specials Quint Carriage of materials tonne LABOUR Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.

Rate

1.00 0.10

8880.00 77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total: 8887.77

Add C.P & OH @15% except on [A] i.e on 8976.65 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 10509.26 Rs 10509.25

Item Code: 18.68.1 P/L S&S C.I standard specials suitable for push on jointing as per IS : 9523: Upto 600 mm diametre. Details of Cost for : 1.00 Qtl Code Description Unit Quantity MATERIALS :7682 Cost of specials Quint 1.00 2309 Carriage of materials tonne 0.10 LABOUR 18.024 Laying S & S or flanged C.I. special such as tees, bends, collars, 1.00 tapers and caps etc. Add water charges @ 1% except on [A] i.e on

Rate 11850.00 77.67 186.11 Total: 11857.77

Add C.P & OH @15% except on [A] i.e on 11976.35 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 13958.91 Rs 13958.95

Item Code: 18.68.2 P/L S&S C.I standard specials suitable for push on jointing as per IS : 9523: Above 600 mm diametre. Details of Cost for : 1.00 Qtl Code Description Unit Quantity MATERIALS :7683 Cost of specials Quint 1.00 2309 Carriage of materials tonne 0.10 LABOUR 18.024 Laying S & S or flanged C.I. special such as tees, bends, collars, 1.00 tapers and caps etc. Add water charges @ 1% except on [A] i.e on

Rate 16280.00 77.67 186.11 Total: 16287.77

Add C.P & OH @15% except on [A] i.e on 16450.65 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 19104.36 Rs 19104.40

Item Code: 18.69.1 P/L D.I. specials class K-12 suitable for jointing as per IS : 9523: Upto 600 mm diametre.

DSR-12

Page 904 of 2298

Code 7684 2309 18.024

Description

Details of Cost for : 1.00 Qtl Unit Quantity

MATERIALS :Cost of specials Quint Carriage of materials tonne LABOUR Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.

Rate

1.00 0.10

12540.00 77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total: 12547.77

Add C.P & OH @15% except on [A] i.e on 12673.25 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 14760.35 Rs 14760.35

Item Code: 18.69.2 P/L D.I. specials class K-12 suitable for jointing as per IS : 9523: Above 600 mm diametre. Details of Cost for : 1.00 Qtl Code Description Unit Quantity MATERIALS :7685 Cost of specials Quint 1.00 2309 Carriage of materials tonne 0.10 LABOUR 18.024 Laying S & S or flanged C.I. special such as tees, bends, collars, 1.00 tapers and caps etc. Add water charges @ 1% except on [A] i.e on

Rate 17580.00 77.67 186.11 Total: 17587.77

Add C.P & OH @15% except on [A] i.e on 17763.65 Cost for 1.00 Qtl Rate per One Qtl: Rate as per DSR-12:

Rs 20614.31 Rs 20614.30

Item Code: 18.70.1 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 100 mm diametre pipes. Details of Cost for : 50.00 Nos Code Description Unit Quantity Rate Details of cost for 50 Joints MATERIALS :7666 Cost of rubber gasket Each 50.00 26.00 LABOUR 0116 Fitter Day 1.00 301.00 0117 Asstt Fitter Day 1.00 273.00 0114 Beldar Day 1.00 247.00 Total: Add water charges @ 1% on 2121.00 Add C.P & OH @15% on 2142.21 Cost for 50.00 Nos Rate per Each: Rate as per DSR-12:

DSR-12

Rs 49.27 Rs 49.25

Page 905 of 2298

Item Code: 18.70.2 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 150 mm diametre pipes. Details of Cost for : 50.00 Nos Code Description Unit Quantity Rate Details of cost for 50 Joints MATERIALS :7668 Cost of rubber gasket Each 50.00 36.00 LABOUR 0116 Fitter Day 1.50 301.00 0117 Asstt. Fitter Day 1.50 273.00 0114 Beldar Day 3.00 247.00 Total: Add water charges @ 1% on 3402.00 Add C.P & OH @15% on 3436.02 Cost for 50.00 Nos Rate per Each: Rate as per DSR-12:

Rs 79.03 Rs 79.05

Item Code: 18.70.3 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 200 mm diametre pipes. Details of Cost for : 50.00 Code Description Unit Quantity Rate MATERIALS :7669 Cost of rubber gasket Each 50.00 62.00 LABOUR 0116 Fitter Day 2.00 301.00 0117 Asstt. Fitter Day 2.00 273.00 0114 Beldar Day 4.00 247.00 Total: Add water charges @ 1% on 5236.00 Add C.P & OH @15% on

Rate per [new Unit]: Rate as per DSR-12:

5288.36 Cost for 50.00

Rs 121.63 Rs 121.65

Item Code: 18.70.4 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 250 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS : 7670 Cost of rubber gasket Each 50.00 73.00 LABOUR: 0116 Fitter Day 2.50 301.00 0117 Asstt. Fitter Day 2.50 273.00 0114 Beldar Day 5.00 247.00 Total: Add water charges @ 1% on 6320.00 Add C.P & OH @15% on 6383.20 Cost for 50.00 joint

DSR-12

Page 906 of 2298

Rate per Joint: Rate as per DSR-12:

Rs 146.81 Rs 146.80

Item Code: 18.70.5 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 300 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7671 Cost of rubber gasket Each 50.00 103.00 LABOUR 0116 Fitter Day 3.00 301.00 0117 Asstt. Fitter Day 3.00 273.00 0114 Beldar Day 6.00 247.00 Total: Add water charges @ 1% on 8354.00 Add C.P & OH @15% on 8437.54 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 194.06 Rs 194.05

Item Code: 18.70.6 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 350 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7672 Cost of rubber gasket Each 50.00 127.00 LABOUR 0116 Fitter Day 3.00 301.00 0117 Asstt. Fitter Day 3.00 273.00 0114 Beldar Day 6.00 247.00 Total: Add water charges @ 1% on 9554.00 Add C.P & OH @15% on 9649.54 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 221.94 Rs 221.95

Item Code: 18.70.7 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 400 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7673 Cost of rubber gasket Each 50.00 234.00 LABOUR 0116 Fitter Day 4.00 301.00 0117 Asstt. Fitter Day 4.00 273.00 0114 Beldar Day 8.00 247.00 Total: Add water charges @ 1% on 15972.00

DSR-12

Page 907 of 2298

Add C.P & OH @15% on 16131.72 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 371.03 Rs 317.05

Item Code: 18.70.8 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 450 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7674 Cost of rubber gasket Each 50.00 260.00 LABOUR 0116 Fitter Day 4.50 301.00 0117 Asstt. Fitter Day 4.50 273.00 0114 Beldar Day 9.00 247.00 Total: Add water charges @ 1% on 17806.00 Add C.P & OH @15% on 17984.06 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 413.63 Rs 413.65

Item Code: 18.70.9 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 500 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7675 Cost of rubber gasket Each 50.00 285.00 LABOUR 0116 Fitter Day 4.75 301.00 0117 Asstt. Fitter Day 4.75 273.00 0114 Beldar Day 9.50 247.00 Total: Add water charges @ 1% on 19323.00 Add C.P & OH @15% on 19516.23 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 448.87 Rs 448.85

Item Code: 18.70.10 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 600 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7676 Cost of rubber gasket Each 50.00 352.00 LABOUR 0116 Fitter Day 6.50 301.00 0117 Asstt. Fitter Day 6.50 273.00 0114 Beldar Day 13.00 247.00

DSR-12

Page 908 of 2298

Add water charges @ 1% on

Total: 24542.00

Add C.P & OH @15% on 24787.42 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 570.11 Rs 570.10

Item Code: 18.70.11 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 650 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7677 Cost of rubber gasket Each 50.00 542.00 LABOUR 0116 Fitter Day 7.70 301.00 0117 Asstt. Fitter Day 7.70 273.00 0114 Beldar Day 15.40 247.00 Total: Add water charges @ 1% on 35323.60 Add C.P & OH @15% on 35676.84 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 820.57 Rs 820.55

Item Code: 18.70.12 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 700 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7678 Cost of rubber gasket Each 50.00 636.00 LABOUR 0116 Fitter Day 7.70 301.00 0117 Asstt. Fitter Day 7.70 273.00 0114 Beldar Day 15.40 247.00 Total: Add water charges @ 1% on 40023.60 Add C.P & OH @15% on 40423.84 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 929.75 Rs 929.75

Item Code: 18.70.13 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 800 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7679 Cost of rubber gasket Each 50.00 684.00 LABOUR

DSR-12

Page 909 of 2298

0116 0117 0114

Fitter Asstt. Fitter Beldar

Day Day Day

8.50 8.50 17.00

Add water charges @ 1% on

301.00 273.00 247.00 Total: 43278.00

Add C.P & OH @15% on 43710.78 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 1005.35 Rs 1005.35

Item Code: 18.70.14 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 900 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7680 Cost of rubber gasket Each 50.00 915.00 LABOUR 0116 Fitter Day 10.00 301.00 0117 Asstt. Fitter Day 10.00 273.00 0114 Beldar Day 20.00 247.00 Total: Add water charges @ 1% on 56430.00 Add C.P & OH @15% on 56994.30 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 1310.87 Rs 1310.85

Item Code: 18.70.15 Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 1000 mm diametre pipes. Details of Cost for : 50.00 joint Code Description Unit Quantity Rate MATERIALS :7681 Cost of rubber gasket Each 50.00 1138.00 LABOUR 0116 Fitter Day 11.00 301.00 0117 Asstt. Fitter Day 11.00 273.00 0114 Beldar Day 22.00 247.00 Total: Add water charges @ 1% on 68648.00 Add C.P & OH @15% on 69334.48 Cost for 50.00 joint Rate per Joint: Rate as per DSR-12:

Rs 1594.69 Rs 1594.70

Item Code: 18.71.1 Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 100 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate

DSR-12

Page 910 of 2298

7712 2319 18.023

MATERIALS: 100 mm dia. cast iron pipes double flanged weight of 1m pipe = 27.00 kg Weight of 5 m pipes 27.00x5 = 135.00 Kg Cost of pipe Carriage of pipes LABOUR Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

5.00 5.00

1260.00 191.48

Qtl

1.35

101.71

Add water charges @ 1% except on [A] i.e on

Total: 6309.57

Add C.P & OH @15% except on [A] i.e on 6372.67 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1493.18 Rs 1493.15

Item Code: 18.71.2 Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 150 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :150 mm dia. cast iron pipes double flanged weight of 1m pipe = 44.10 kg Weight of 5 m pipes 44.10x5 = 220.50 Kg 7713 Cost of pipe Metre 5.00 1960.00 2321 Carriage of pipes 100 m 5.00 319.12 LABOUR 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 2.21 101.71 SH : Water Supply Add water charges @ 1% except on [A] i.e on

Total: 9815.96

Add C.P & OH @15% except on [A] i.e on 9914.12 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2325.20 Rs 2325.20

Item Code: 18.71.3 Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 200 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS:200 mm dia. cast iron pipes double flanged weight of 1m pipe = 63.50 kg Weight of 5 m pipes 63.50 0x5 = 317.50 Kg 7714 Cost of pipe Metre 5.00 3170.00 2322 Carriage of pipes 100 m 5.00 519.11 LABOUR 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 3.18 101.71 SH : Water Supply Total:

DSR-12

Page 911 of 2298

Add water charges @ 1% except on [A] i.e on

15875.96

Add C.P & OH @15% except on [A] i.e on 16034.72 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3752.67 Rs 3752.65

Item Code: 18.71.4 Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 250 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :250 mm dia. cast iron pipes double flanged weight of 1m pipe= 85.30 kg Weight of 5 m pipes 85.30 x5 = 426.50 Kg 7715 Cost of pipe Metre 5.00 3730.00 2323 Carriage of pipes 100 m 5.00 737.68 LABOUR 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 4.27 101.71 SH : Water Supply Add water charges @ 1% except on [A] i.e on

Total: 18686.88

Add C.P & OH @15% except on [A] i.e on 18873.75 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4427.82 Rs 4427.80

Item Code: 18.71.5 Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 300 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :300 mm dia. cast iron pipes double flanged weight of 1m pipe= 110.00 kg Weight of 5 m pipes 110.00x5 = 550.00 Kg 7716 Cost of pipe Metre 5.00 4770.00 2324 Carriage of pipes 100 m 5.00 911.78 LABOUR 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 5.50 101.71 SH : Water Supply Add water charges @ 1% except on [A] i.e on

Total: 23895.59

Add C.P & OH @15% except on [A] i.e on 24134.55 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5662.83 Rs 5662.80

Item Code: 18.71.6

DSR-12

Page 912 of 2298

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 350 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate Details of cost for 5 metre Materials :350 mm dia. cast iron pipes double flanged weight of 1m pipe = 135.70 kg Weight of 5 m pipes 135.70x5 = 678.50 Kg 7717 Cost of pipe Metre 5.00 6080.00 2325 Carraige of Spun iron S & S pipes 350 mm dia 100 m 5.00 1276.50 Labour S&fcS 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 6.79 101.71 SH : Water Supply Add water charges @ 1% except on [A] i.e on

Total: 30463.83

Add C.P & OH @15% except on [A] i.e on 30768.47 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 7214.87 Rs 7214.85

Item Code: 18.71.7 Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 400 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :400 mm dia. cast iron pipes double flanged weight of 1m pipe = 166.80kg Weight of 5 m pipes 166.80x5 = 834.00 Kg 7718 Cost of pipe Metre 5.00 7890.00 2326 Carriage of pipes 100 m 5.00 1740.68 LABOUR 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 8.34 101.71

Add water charges @ 1% except on [A] i.e on

Total: 39537.03

Add C.P & OH @15% except on [A] i.e on 39932.40 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 9354.10 Rs 9354.10

Item Code: 18.71.8 Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 450 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :450 mm dia. cast iron pipes double flanged weight of 1m pipe= 201.600 kg Weight of 5 m pipes 201.600x5 = 1008.00 Kg 7719 Cost of pipe Metre 5.00 9940.00

DSR-12

Page 913 of 2298

2327 18.023

Carriage of pipes LABOUR Laying centrifugally cast (spun) iron S & S or flanged pipes.

100 m

5.00

2127.50

10.08

101.71

Add water charges @ 1% except on [A] i.e on

Total: 49806.38

SH : Water Supply

Add C.P & OH @15% except on [A] i.e on 50304.44 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 11775.07 Rs 11775.05

Item Code: 18.71.9 Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 500 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :500 mm dia. cast iron pipes double flanged weight of 1m pipe= 234.80 kg Weight of 5 m pipes 234.80x5 = 1174.00 Kg 7720 Cost of pipe Metre 5.00 12390.00 2328 Carriage of pipes 100 m 5.00 2127.50 LABOUR 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 11.74 101.71 SH : Water Supply Add water charges @ 1% except on [A] i.e on

Total: 62056.38

Add C.P & OH @15% except on [A] i.e on 62676.94 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 14654.51 Rs 14654.50

Item Code: 18.71.10 Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 600 mm diametre C.I. Double flanged Pipe. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :600 mm dia. cast iron pipes double flanged weight of 1m pipe= 315.30kg Weight of 5 m pipes 315.30x5 = 1576.50 Kg 7721 Cost of pipe Metre 5.00 15330.00 2329 Carriage of pipes 100 m 5.00 3191.25 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 15.77 101.71 Water Supply Add water charges @ 1% except on [A] i.e on

Total: 76809.56

Add C.P & OH @15% except on [A] i.e on 77577.66 Cost for 5.00 m

DSR-12

Page 914 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 18163.66 Rs 18163.60

Item Code: 18.72.1 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 100 mm diametre Ductile iron Class K - 7 pipes.

Code

7722 2343 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :100mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 15.39 kg Weight of 10m pipes 15.39x10= 153.90 Kg Cost of pipe Carriage of pipes Labour for laying Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

708.00 191.48

1.54

101.71

Add water charges @ 1% except on [A] i.e on

Total: 7099.15

Add C.P & OH @15% except on [A] i.e on 7170.14 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 840.23 Rs 840.25

Item Code: 18.72.2 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 150 mm diametre Ductile iron Class K - 7 pipes.

Code

7723 2344 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :150 mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 22.750kg Weight of 10m pipes 22.750x 10 = 227.50 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

1035.00 319.12

2.28

101.71

Add water charges @ 1% except on [A] i.e on

Total: 10381.91

Add C.P & OH @15% except on [A] i.e on 10485.73 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1229.05 Rs 1229.05

Item Code: 18.72.3 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 200 mm diametre Ductile iron Class K - 7 pipes.

Code

Description

Details of Cost for : 10.00 m Unit Quantity

Rate

MATERIALS :200 mm dia. cast iron pipes (in 5.5 m lengths)

DSR-12

Page 915 of 2298

7724 2345 18.023

Weight of 1m pipe= 30.090 kg Weight of 10m pipes 30.090x10 = 300.90 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

10.00 10.00

1415.00 519.11

3.01

101.71

Add water charges @ 1% except on [A] i.e on

Total: 14201.91

Add C.P & OH @15% except on [A] i.e on 14343.93 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1680.17 Rs 1680.15

Item Code: 18.72.4 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 250 mm diametre Ductile iron Class K - 7 pipes.

Code

7725 2346 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :250mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 39.310kg Weight of 10m pipes 39.310x10 = 393.10 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

1920.00 737.68

3.93

101.71

Add water charges @ 1% except on [A] i.e on

Total: 19273.77

Add C.P & OH @15% except on [A] i.e on 19466.51 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2278.62 Rs 2278.60

Item Code: 18.72.5 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 300 mm diametre Ductile iron Class K - 7 pipes.

Code

7726 2347 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :300mm dia. cast iron pfpes (in 5.5 m lengths) Weight of 1m pipe =48.400kg Weight of 10m pipes 48.400x10 = 484.00 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

2638.00 911.78

4.84

101.71

Add water charges @ 1% except on [A] i.e on

Total: 26471.18

Add C.P & OH @15% except on [A] i.e on 26735.89 Cost for 10.00 m

DSR-12

Page 916 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 3123.86 Rs 3123.85

Item Code: 18.72.6 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 350 mm diametre Ductile iron Class K - 7 pipes.

Code

7727 2348 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :350mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 66.020kg Weight of 10m pipes 66.020x10 = 660.20 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

3135.00 1276.50

6.60

101.71

Add water charges @ 1% except on [A] i.e on

Total: 31477.65

Add C.P & OH @15% except on [A] i.e on 31792.43 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3723.26 Rs 3723.25

Item Code: 18.72.7 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 400 mm diametre Ductile iron Class K - 7 pipes.

Code

7728 2349 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :400mm dia. cast iron pipes (in 5.5 m lengths) Weight of 10m pipes 78.280x10 = 782.80 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

3714.00 1740.68

7.83

101.71

Add water charges @ 1% except on [A] i.e on

Total: 37314.07

Add C.P & OH @15% except on [A] i.e on 37687.21 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4413.67 Rs 4413.65

Item Code: 18.72.8 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 450 mm diametre Ductile iron Class K - 7 pipes.

Code

Description

Details of Cost for : 10.00 m Unit Quantity

Rate

MATERIALS :450mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 91.410kg

DSR-12

Page 917 of 2298

7729 2350 18.023

Weight of 10m pipes 91.410x10 = 914.10 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

10.00 10.00

4411.00 2127.50

9.14

101.71

Add water charges @ 1% except on [A] i.e on

Total: 44322.75

Add C.P & OH @15% except on [A] i.e on 44765.98 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5241.05 Rs 5241.05

Item Code: 18.72.9 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 500 mm diametre Ductile iron Class K - 7 pipes.

Code

7730 2351 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :500mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe = 106.640 kg Weight of 10m pipes 106.640x10 = 1066.40 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

5214.00 2127.50

10.66

101.71

Add water charges @ 1% except on [A] i.e on

Total: 52352.75

Add C.P & OH @15% except on [A] i.e on 52876.28 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 6189.20 Rs 6189.20

Item Code: 18.72.10 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 600 mm diametre Ductile iron Class K - 7 pipes.

Code

7731 2352 18.023

DSR-12

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :600mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe=138.610kg Weight of 10m pipes 138.610x10= 1386.10 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

metre 100 m

Rate

10.00 10.00

6801.00 3191.25

13.86

101.71

Add water charges @ 1% except on [A] i.e on

Total: 68329.13

Add C.P & OH @15% except on [A] i.e on

69012.42

Page 918 of 2298

Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 8077.40 Rs 8077.40

Item Code: 18.72.11 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 700 mm diametre Ductile iron Class K - 7 pipes.

Code

7732 2353 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :700mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe=188.920 kg Weight of 10m pipes 188.920x 10 = 1889.20 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

8739.00 3191.25

18.89

101.71

Add water charges @ 1% except on [A] i.e on

Total: 87709.13

Add C.P & OH @15% except on [A] i.e on 88586.22 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 10379.55 Rs 10379.50

Item Code: 18.72.12 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 800 mm diametre Ductile iron Class K - 7 pipes.

Code

7733 2355 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :800mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 243.510kg Weight of 10m pipes 243.510x10 = 2435.10 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

11156.00 3191.25

24.35

101.71

Add water charges @ 1% except on [A] i.e on

Total: 111879.13

Add C.P & OH @15% except on [A] i.e on 112997.92 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 13242.43 Rs 13242.40

Item Code: 18.72.13 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 900 mm diametre Ductile iron Class K - 7 pipes.

Code

Description

Details of Cost for : 10.00 m Unit Quantity

Rate

MATERIALS:-

DSR-12

Page 919 of 2298

7734 2356 18.023

900 mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 282.74 kg Weight of 10m pipes 282.74x10 = 2827.40 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

metre 100 m

10.00 10.00

14617.00 4786.87

28.27

101.71

Add water charges @ 1% except on [A] i.e on

Total: 146648.69

Add C.P & OH @15% except on [A] i.e on 148115.18 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 17320.78 Rs 17320.75

Item Code: 18.72.14 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 100mm diametre Ductile iron Class K - 7 pipes.

Code

7735 2357 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :1000 mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 348.230kg Weight of 10m pipes 348.230x 10 = 3482.30 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

metre 100 m

Rate

10.00 10.00

15485.00 6382.50

34.82

101.71

Add water charges @ 1% except on [A] i.e on

Total: 155488.25

Add C.P & OH @15% except on [A] i.e on 157043.13 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 18414.11 Rs 18414.10

Item Code: 18.72.15 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 100 mm diametre Ductile iron Class K - 9 pipes.

Code

7651 2319 18.023

DSR-12

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :100mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 17.760Kg Weight of 10m pipes 17.760x 10=177.60 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

797.00 191.48

1.776

101.71

Add water charges @ 1% except on [A] i.e on

Total: 7989.15

Add C.P & OH @15% except on [A] i.e on

8069.04

Page 920 of 2298

Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 946.00 Rs 946.00

Item Code: 18.72.16 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 150 mm diametre Ductile iron Class K - 9 pipes.

Code

7652 2321 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :150 mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe =26.27Kg Weight of 10m pipes 26.270x10 = 262.70 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

1170.00 319.12

2.627

101.71

Add water charges @ 1% except on [A] i.e on

Total: 11731.91

Add C.P & OH @15% except on [A] i.e on 11849.23 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1389.38 Rs 1389.40

Item Code: 18.72.17 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 200 mm diametre Ductile iron Class K - 9 pipes.

Code

7653 2322 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :200 mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 36.150Kg Weight of 10m pipes 36.150x 10 = 361.50 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

1595.00 519.11

3.615

101.71

Add water charges @ 1% except on [A] i.e on

Total: 16001.91

Add C.P & OH @15% except on [A] i.e on 16161.93 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1895.39 Rs 1895.40

Item Code: 18.72.18 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 250 mm diametre Ductile iron Class K - 9 pipes.

Code

Description

Details of Cost for : 10.00 m Unit Quantity

Rate

MATERIALS :-

DSR-12

Page 921 of 2298

7654 2323 18.023

250mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe = 48.00 Kg Weight of 10m pipes 48.000x10 = 480.00 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

10.00 10.00

2105.00 737.68

4.80

101.71

Add water charges @ 1% except on [A] i.e on

Total: 21123.77

Add C.P & OH @15% except on [A] i.e on 21335.01 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2502.35 Rs 2502.35

Item Code: 18.72.19 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 300 mm diametre Ductile iron Class K - 9 pipes.

Code

7655 2324 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :300mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 60.490 Kg Weight of 10m pipes 60.490x10 = 604.90 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

2680.00 911.78

6.049

101.71

Add water charges @ 1% except on [A] i.e on

Total: 26891.18

Add C.P & OH @15% except on [A] i.e on 27160.09 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3184.93 Rs 3184.95

Item Code: 18.72.20 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 350 mm dia Ductile Iron Class K-9 pipes

Code

Details of Cost for : 10.00 m Unit Quantity

Description

Rate

MATERIALS: 350mm dia cast iron pipes (in 5.5m lengths) Weight of im pipe = 79.730 kg Weight of 10m pipes = 79.730 x 10 = 797.30 kg 7656 2325 18.023

DSR-12

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm Metre dia Carraige of Spun iron S & S pipes 350 mm dia 100 m Labour for Laying Laying centrifugally cast (spun) iron S & S or flanged pipes. Qtl

10.00

3225.00

10.00

1276.50

7.973

101.71

Add water charges @ 1% except on [A] i.e on

Total: 32377.65

Page 922 of 2298

Add C.P & OH @15% except on [A] i.e on 32701.43 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3841.76 Rs 3841.75

Item Code: 18.72.21 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 400 mm diametre Ductile iron Class K - 9 pipes.

Code

7657 2326 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :400mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe =94.800 Kg Weight of 10m pipes 94.800x10 = 948.00 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

4350.00 1740.68

9.48

101.71

Add water charges @ 1% except on [A] i.e on

Total: 43674.07

Add C.P & OH @15% except on [A] i.e on 44110.81 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5169.16 Rs 5169.15

Item Code: 18.72.22 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 450 mm diametre Ductile iron Class K - 9 pipes.

Code

7658 2327 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :450mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 110.970Kg Weight of 10m pipes 110.970x 10 = 1109.70 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

5085.00 2127.50

11.097

101.71

Add water charges @ 1% except on [A] i.e on

Total: 51062.75

Add C.P & OH @15% except on [A] i.e on 51573.38 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 6043.81 Rs 6043.80

Item Code: 18.72.23 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 500 mm diametre Ductile iron Class K - 9 pipes. Details of Cost for : 10.00 m

DSR-12

Page 923 of 2298

Code

7659 2328 18.023

Description MATERIALS :500mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe =129.480Kg Weight of 10m pipes 129.480x10= 1294.80 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Unit

Quantity

Rate

10.00 10.00

6180.00 2127.50

12.948

101.71

Add water charges @ 1% except on [A] i.e on

Total: 62012.75

Metre 100 m

Add C.P & OH @15% except on [A] i.e on 62632.88 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 7334.48 Rs 7334.45

Item Code: 18.72.24 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 600 mm diametre Ductile iron Class K - 9 pipes.

Code

7660 2329 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS:600mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 168.680 Kg Weight of 10m pipes 168.680x10= 1686.80 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

7430.00 3191.25

16.868

101.71

Add water charges @ 1% except on [A] i.e on

Total: 74619.13

Add C.P & OH @15% except on [A] i.e on 75365.32 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 8838.58 Rs 8838.45

Item Code: 18.72.25 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 700 mm diametre Ductile iron Class K - 9 pipes.

Code

7661 2330 18.023

DSR-12

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :700mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe= 217.540 Kg Weight of 10m pipes 217.540x10 = 2175.40 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

10050.00 2127.50

21.754

101.71

Add water charges @ 1% except on [A] i.e on

Total: 100712.75

Page 924 of 2298

Add C.P & OH @15% except on [A] i.e on 101719.88 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 11919.05 Rs 11919.00

Item Code: 18.72.26 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 700 mm diametre Ductile iron Class K - 9 pipes.

Code

7662 2331 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :750mm dia. cast iron pipes (in 5.5 m lengths) Wt. of 1 m pipe = 242.60 Kg. Weight of 10m pipes 242.60x10 = 2426.00 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

11350.00 4786.87

24.26

101.71

Add water charges @ 1% except on [A] i.e on

Total: 113978.69

Add C.P & OH @15% except on [A] i.e on 115118.48 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 13485.37 Rs 13485.35

Item Code: 18.72.27 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 800 mm diametre Ductile iron Class K - 9 pipes.

Code

7663 2332 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :800 mm dia. cast iron pfpes (in 5.5 m lengths) Weight of 1m pipe= 267.100 Kg Weight of 10m pipes 267.100x10 = 2671.00 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

11990.00 6382.50

26.71

101.71

Add water charges @ 1% except on [A] i.e on

Total: 120538.25

Add C.P & OH @15% except on [A] i.e on 121743.63 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 14272.18 Rs 14272.15

Item Code: 18.72.28 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 900 mm diametre Ductile iron Class K - 9 pipes. Details of Cost for : 10.00 m

DSR-12

Page 925 of 2298

Code

7664 2333 18.023

Description MATERIALS : 900 mm dia. cast iron pipes (in 5.5 m lengths) Weight of 1m pipe =321.290 Kg Weight of 10m pipes 321.290x10 = 3212.90 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Unit

Quantity

Rate

10.00 10.00

14030.00 6382.50

32.129

101.71

Add water charges @ 1% except on [A] i.e on

Total: 140938.25

Metre 100 m

Add C.P & OH @15% except on [A] i.e on 142347.63 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 16696.76 Rs 16696.70

Item Code: 18.72.29 P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 100mm diametre Ductile iron Class K - 9 pipes.

Code

7665 2334 18.023

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS :1000 mm dia. cast irori pipes (in 5.5 m lengths) Weight of 1m pipe = 380.190 kg Weight of 10m pipes 380.190x10 = 3801.90 Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre 100 m

Rate

10.00 10.00

15750.00 6382.80

38.019

101.71

Add water charges @ 1% except on [A] i.e on

Total: 158138.28

Add C.P & OH @15% except on [A] i.e on 159719.66 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 18754.45 Rs 18754.40

Item Code: 18.73.1 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 100 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :100 mm dia. ductile iron pipes double flanged Weight of 1m pipe = 21.700 kg Weight of 10m pipes 21.700x5 = 108.50 Kg 7686 Cost of pipe Metre 5.00 2025.00 2319 Carriage of pipes 100 m 5.00 191.48 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 1.09 101.71

Add water charges @ 1% except on [A] i.e on

DSR-12

Total: 10134.57

Page 926 of 2298

Add C.P & OH @15% except on [A] i.e on 10235.92 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2376.43 Rs 2376.45

Item Code: 18.73.2 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 150 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :150 mm dia. ductile iron pipes double flanged Weight of 1m pipe = 32.600 kg Weight of 5m pipes32.600x5 = 163.00Kg 7687 Cost of pipe metre 5.00 2825.00 2321 Carriage of pipes 100 m 5.00 319.12 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 1.63 101.71

Add water charges @ 1% except on [A] i.e on

Total: 14140.96

Add C.P & OH @15% except on [A] i.e on 14282.37 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3318.10 Rs 3318.10

Item Code: 18.73.3 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 200 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :200mm dia. ductile iron pipes double flanged Weight of 1m pipe = 44.200 kg Weight of 5m pipes44.200x5 =221.00Kg 7688 Cost of pipe Metre 5.00 3740.00 2322 Carriage of pipes 100 m 5.00 519.11 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 2.21 101.71

Add water charges @ 1% except on [A] i.e on

Total: 18725.96

Add C.P & OH @15% except on [A] i.e on 18913.22 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4395.00 Rs 4395.00

Item Code: 18.73.4 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 250 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m

DSR-12

Page 927 of 2298

Code

7689 2323 18.023

Description MATERIALS :250 mm dia. ductile iron pipes double flanged Weight of 1m pipe =59.400kg Weight of 5m pipes 59.400x5 = 297.00Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Unit

Quantity

Rate

5.00 5.00

4935.00 737.68

2.97

101.71

Add water charges @ 1% except on [A] i.e on

Total: 24711.88

Metre 100 m

Add C.P & OH @15% except on [A] i.e on 24959.00 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5800.99 Rs 5801.00

Item Code: 18.73.5 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 300 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :300 mm dia. ductile iron pipes double flanged Weight of 1m pipe =76.400kg Weight of 5m pipes 76.400x5 = 382.00Kg 7690 Cost of pipe metre 5.00 6330.00 2324 Carriage of pipes 100 m 5.00 911.78 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 3.82 101.71

Add water charges @ 1% except on [A] i.e on

Total: 31695.59

Add C.P & OH @15% except on [A] i.e on 32012.55 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 7440.59 Rs 7440.60

Item Code: 18.73.6 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 350 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :350 mm dia. ductile iron pipes double flanged Weight of 1m pipe =91.400kg Weight of 5m pipes 91.400x5 = 457.00Kg 7691 Cost of pipe Metre 5.00 8020.00 2325 Carriage of pipes 100 m 5.00 1276.50 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 4.57 101.71

Add water charges @ 1% except on [A] i.e on

DSR-12

Total: 40163.83

Page 928 of 2298

Add C.P & OH @15% except on [A] i.e on 40565.47 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 9423.02 Rs 9423.00

Item Code: 18.73.7 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 400 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :400 mm dia. ductile iron pipes double flanged Weight of 1m pipe =108.100kg Weight of 5m pipes 108.100x5 = 540.50Kg 7692 Cost of pipe Metre 5.00 9645.00 2326 Carriage of pipes 100 m 5.00 1740.68 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 5.40 101.71

Add water charges @ 1% except on [A] i.e on

Total: 48312.03

Add C.P & OH @15% except on [A] i.e on 48795.15 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 11332.73 Rs 11332.70

Item Code: 18.73.8 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 450 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :450 mm dia. ductile iron pipes double flanged Weight of 1m pipe =127.800kg Weight of 5m pipes 127.800x5 = 639.00Kg 7693 Cost of pipe Metre 5.00 11675.00 2327 Carriage of pipes 100 m 5.00 2127.50 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 6.39 101.71

Add water charges @ 1% except on [A] i.e on

Total: 58481.38

Add C.P & OH @15% except on [A] i.e on 59066.19 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 13715.21 Rs 13715.20

Item Code: 18.73.9 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 500 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m

DSR-12

Page 929 of 2298

Code

7694 2328 18.023

Description MATERIALS :500 mm dia. ductile iron pipes double flanged Weight of 1m pipe =147.900kg Weight of 5m pipes 147.900x5 = 739.50Kg Cost of pipe Carriage of pipes LABOUR FOR LAYING Laying centrifugally cast (spun) iron S & S or flanged pipes.

Unit

Quantity

Rate

5.00 5.00

13895.00 2127.50

7.40

101.71

Add water charges @ 1% except on [A] i.e on

Total: 69581.38

Metre 100 m

Add C.P & OH @15% except on [A] i.e on 70277.19 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 16314.28 Rs 16314.30

Item Code: 18.73.10 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 600 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :600 mm dia. ductile iron pipes double flanged Weight of 1m pipe =198.900kg Weight of 5m pipes 198.900x5 = 994.50Kg 7695 Cost of pipe Metre 5.00 18760.00 2329 Carriage of pipes 100 m 5.00 3191.25 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 9.95 101.71

Add water charges @ 1% except on [A] i.e on

Total: 93959.56

Add C.P & OH @15% except on [A] i.e on 94899.16 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 22029.21 Rs 22029.20

Item Code: 18.73.11 Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 700 mm diametre Ductile iron Double flanged. Details of Cost for : 5.00 m Code Description Unit Quantity Rate MATERIALS :700 mm dia. ductile iron pipes double flanged Weight of 1m pipe =254.90 kg Weight of 5m pipes 254.90x5 = 1274.50 Kg 7696 Cost of pipe Metre 5.00 23275.00 2330 Carriage of pipes 100 m 5.00 2127.50 LABOUR FOR LAYING 18.023 Laying centrifugally cast (spun) iron S & S or flanged pipes. 12.75 101.71

Add water charges @ 1% except on [A] i.e on

DSR-12

Total: 116481.38

Page 930 of 2298

Add C.P & OH @15% except on [A] i.e on 117646.19 Cost for 5.00 m Rate per One Metre: Rate as per DSR-12:

Rs 27317.98 Rs 27318.00

Item Code: 18.74.1 P/F unplasticised P.V.C. connection pipe- of app.quality and colour. 15 mm nominal bore with 30cm length. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7862 15 mm nominal bore and 30cm len each 1.00 9999 Carriage of material and fixing changes L.S. 12.22 Add water charges @ 1% on

Rate 33.00 1.49 Total: 51.21

Add C.P & OH @15% on 51.72 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 59.48 Rs 59.50

Item Code: 18.74.2 P/F unplasticised P.V.C. connection pipeof app. quality and colour. 15 mm nominal bore with 45 cm length Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7863 15 mm nominal bore and 45 cm length PVC connection pipe each 1.00 with P.T.M.T. Nuts 9999 Carriage of material and fixing changes L.S. 13.52 Add water charges @ 1% on

Rate 38.00

1.49 Total: 58.14

Add C.P & OH @15% on 58.72 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 67.53 Rs 67.55

Item Code: 18.75.1 P/F PTMT extn nipple for water tank pipe, fittings- 15 mm nominal bore. Weighing not less than 32 gms. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7864 PTMT extension nipple 15 mm each 1.00 9999 Carriage of material and fixing changes L.S. 3.38 Add water charges @ 1% on

Rate 32.00 1.49 Total: 37.04

Add C.P & OH @15% on 37.41 Cost for 1.00 No. Rate per Each:

DSR-12

Rs 43.02

Page 931 of 2298

Rate as per DSR-12:

Rs 43.00

Item Code: 18.75.2 P/F PTMT extn nipple for water tank pipe- 20mm nominal bore. Weighing not less than 40gms. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS: 7865 PTMT extension nipple 20 mm each 1.00 9999 Carriage of material and fixing changes L.S. 3.38 Add water charges @ 1% on

Rate 38.00 1.49 Total: 43.04

Add C.P & OH @15% on 43.47 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 49.99 Rs 50.00

Item Code: 18.75.3 P/F P.T.M.T extesion nipple for water tank pipe, fitt- ings of approved quality: 25 mm n/b weighing not less than 62 grams.

Code 7866 9999

Description MATERIALS : P.T.M.T extension nipple 25mm Carriage of materials and fixing charges

Details of Cost for : 1.00 No. Unit Quantity each L.S.

1.00 3.38

Add water charges @ 1% on

Rate 57.00 1.49 Total: 62.04

Add C.P & OH @15% on 62.66 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 72.06 Rs 72.05

Item Code: 18.76.1 Cutting holes upto 30x30cm in walls, making good the same With FPS bricks. Details of Cost for : 10.00 Nos Code Description Unit Quantity Details of cost for 10 holes Size 30x30 cm in 34 cm wall Labour for cutting holes 0123 (A) Mason 1st class Day 0.16 0124 (A) Mason 2nd class Day 0.16 0114 (A) Beldar Day 1.25 Brick work with bricks of class designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) 10x0.30x0.30x0.344m = 0.309 cum Les 33% for pipe etc. = (-) 0.102 cum = 0.207 cum Say 0.21 cum 06.004.01 Brick work with FPS bricks of class designation 75 in super 0.21 structure above plinth level u 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) 10x2x0.3x0.3m = 1.80 sqm

DSR-12

Rate

301.00 273.00 247.00

4067.84

Page 932 of 2298

13.004.01

Les 33% for pipe etc. = (-) 0.59 sqm = 1.21 sqm Say 1.20 sqm 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

9999 9999

Finishing) (B) Add for delay (B) Sundries

L.S. L.S.

1.20

132.11

16.12 8.06

1.49 1.49 Total: 436.62

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 440.99 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 151.99 Rs 152.00

Item Code: 18.77 Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc.-including finishing complete so as to make it leak proof. Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate Labour for cutting holes 0123 (A) Mason 1st class Day 0.83 301.00 0124 (A) Mason 2nd class Day 0.83 273.00 0114 (A) Beldar Day 1.67 247.00 Cement concrete 1:2:4 (1 cement: 2 coarse sand ; 4 graded stone aggregate 20 mm nominal size) 10x0.15x0.15x0.15 m = 0.033 cum Les 33% for pipe etc. = (-) 0.011 cum = 0.022 cum Say 0.0.02 cum 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.02 4514.03 Coarse sand, 20mmstone a 9999 (B) Finishing top and bottom and making the holes leak proof L.S. 121.16 1.49 9999 9999

(B) Add for delay (B) Sundries

L.S. L.S.

40.30 21.58

Add water charges @ 1% except on [A] i.e on

1.49 1.49 Total: 1161.64

Add C.P & OH @15% except on [A] i.e on 1173.26 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 143.95 Rs 143.95

Item Code: 18.78 Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. pipe etc.

DSR-12

Code

Description Labour for making chases

0123 0124 0114

Mason I class Mason II class Beldar Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.075x0.075x10 m = 0.05625 cum

Details of Cost for : 10.00 m Unit Quantity

Day Day Day

0.25 0.25 1.00

Rate

301.00 273.00 247.00

Page 933 of 2298

04.002.05

Les 33% for pipe etc. = (-) 0.01856 cum = 0.03769 cum Say 0.04 cum P/L CC walls, columns, string courses, coping, bed blocks, Cum window sills etc. up to floor f

0.04

4782.36

Add water charges @ 1% except on [A] i.e on

Total: 390.50

Add C.P & OH @15% except on [A] i.e on 394.41 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 64.49 Rs 63.60

Item Code: 18.79 Making hole upto 20x20cm, embedding pipes upto 150 mm dia in masonary Details of Cost for : 10.00 m Code Description Unit Quantity Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 04.002.05 P/L CC walls, columns, string courses, coping, bed blocks, 0.22 window sills etc. up to floor f Less for pipe Pi x(0.15)^2 /4x10m=0.177 cum = 0.223 cum Say 0.22 cum (Rate as per item no 4.2.5 SH : Concrete work) 9999 (A) Disposal of malba L.S. 13.52 Add water charges @ 1% except on [A] i.e on

Rate

4782.36

1.49 Total: 20.14

Add C.P & OH @15% except on [A] i.e on 20.34 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 107.55 Rs 102.80

Item Code: 18.80.1 Disinfecting CI water mains with wate r containing bleaching powder 80 mm diameter C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x3.1416/4x(80/10)^2 x(100x100)/1000x0.5 gms. 1301 = 754.28 gms Say 0.008 q quint 0.008 LABOUR 0116 Fitter Day 0.33 0114 Beldar Day 1.31 9999 Sundries including testing of samples L.S. 9.88 Add water charges @ 1% on

Rate

1750.00 301.00 247.00 1.49 Total: 451.62

Add C.P & OH @15% on 456.14 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 524.56 Rs 524.55

Item Code: 18.80.2 Disinfecting CI water mains with wate r containing bleaching powder 100 mm diametre C.I. pipe.

DSR-12

Page 934 of 2298

Code

1301 0116 0114 9999

Description MATERIAL Bleaching powder 3x(3.1416/4)x(100/10)^2 x(100x100)/1000x0.5 gms. = 1178.57 gms Say 0.012 q LABOUR Fitter Beldar Sundries including testing of samples

Details of Cost for : 100.00 m Unit Quantity

Rate

quint

0.012

1750.00

Day Day L.S.

0.49 1.64 13.52

301.00 247.00 1.49 Total: 593.71

Add water charges @ 1% on

Add C.P & OH @15% on 599.65 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 689.60 Rs 689.60

Item Code: 18.80.3 Disinfecting CI water mains with wate r containing bleaching powder 125 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x(3.1416/4)x(125/10)^2 x(100x100)/1000x0.5 gms. 1301 = 1841.52 gms Say 0.008 q quint 0.018 LABOUR 0116 Fitter Day 0.66 0114 Beldar Day 1.97 9999 Sundries including testing of samples L.S. 17.94 Add water charges @ 1% on

Rate

1750.00 301.00 247.00 1.49 Total: 743.48

Add C.P & OH @15% on 750.91 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 863.55 Rs 863.55

Item Code: 18.80.4 Disinfecting CI water mains with wate r containing bleaching powder 150 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x(3.1416/4)x(150/10)^2 x(100x100)/1000x0.5 gms. 1301 = 2651 gms Say 0.027 q quint 0.027 LABOUR 0116 Fitter Day 0.82 0114 Beldar Day 2.30 9999 Sundries including testing of samples L.S. 22.88 Add water charges @ 1% on

Rate

1750.00 301.00 247.00 1.49 Total: 896.26

Add C.P & OH @15% on 905.22 Cost for 100.00 m

DSR-12

Page 935 of 2298

Rate per 100 Metre: Rate as per DSR-12:

Rs 1041.00 Rs 1041.00

Item Code: 18.80.5 Disinfecting CI water mains with wate r containing bleaching powder 200 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x(3.1416/4)x(200/10)^2 x(100x100)/1000x0.5 gms. 1301 = 4712.39 gms Say 0.047 q quint 0.047 LABOUR 0116 Fitter Day 1.15 0114 Beldar Day 2.95 9999 Sundries including testing of samples L.S. 31.46 Add water charges @ 1% on

Rate

1750.00 301.00 247.00 1.49 Total: 1203.93

Add C.P & OH @15% on 1215.97 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 1398.37 Rs 1398.35

Item Code: 18.80.6 Disinfecting CI water mains with wate r containing bleaching powder 250 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x(3.1416/4)x(250/10)^2 x(100x100)/1000x0.5 gms. 1301 = 7363.10 gms Say 0.074 q quint 0.074 LABOUR 0116 Fitter Day 1.48 0114 Beldar Day 3.61 9999 Sundries including testing of samples L.S. 40.30 Add water charges @ 1% on

Rate

1750.00 301.00 247.00 1.49 Total: 1526.70

Add C.P & OH @15% on 1541.97 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 1773.27 Rs 1773.25

Item Code: 18.80.7 Disinfecting CI water mains with wate r containing bleaching powder 300 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x(3.1416/4)x(300/10)^2 x(100x100)/1000x0.5 gms. 1301 = 10602.88 gms Say 0.106 q quint 0.106 LABOUR 0116 Fitter Day 1.64 0114 Beldar Day 3.94 9999 Sundries including testing of samples L.S. 44.46

DSR-12

Rate

1750.00 301.00 247.00 1.49

Page 936 of 2298

Add water charges @ 1% on

Total: 1718.57

Add C.P & OH @15% on 1735.76 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 1996.12 Rs 1996.10

Item Code: 18.80.8 Disinfecting CI water mains with wate r containing bleaching powder 350 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x(3.1416/4)x(350/10)^2 x(100x100)/1000x0.5 gms. 1301 = 14431.70 gms Say 0.144 q quint 0.144 LABOUR 0116 Fitter Day 1.80 0114 Beldar Day 4.27 9999 Sundries including testing of samples L.S. 48.36 Add water charges @ 1% on

Rate

1750.00 301.00 247.00 1.49 Total: 1920.55

Add C.P & OH @15% on 1939.76 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 2230.72 Rs 2230.70

Item Code: 18.80.9 Disinfecting CI water mains with wate r containing bleaching powder 400 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x(3.1416/4)x(400/10)^2 x(100x100)/1000x0.5 gms. 1301 = 18849.60 gms Say 0.189 q quint 0.189 LABOUR 0116 Fitter Day 1.97 0114 Beldar Day 4.59 9999 Sundries including testing of samples L.S. 53.82 Add water charges @ 1% on

Rate

1750.00 301.00 247.00 1.49 Total: 2137.64

Add C.P & OH @15% on 2159.02 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 2482.87 Rs 2482.85

Item Code: 18.80.10 Disinfecting CI water mains with wate r containing bleaching powder 450 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder

DSR-12

Rate

Page 937 of 2298

1301 0116 0114 9999

3x(3.1416/4)x(450/10)^2 x(100x100)/1000x0.5 gms. = 23856.50 gms Say 0.239 q LABOUR Fitter Beldar Sundries including testing of samples

quint

0.239

1750.00

Day Day L.S.

2.13 4.92 58.24

301.00 247.00 1.49 Total: 2361.40

Add water charges @ 1% on

Add C.P & OH @15% on 2385.01 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 2742.76 Rs 2742.75

Item Code: 18.80.11 Disinfecting CI water mains with wate r containing bleaching powder 500 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x(3.1416/4)x(500/10)^2 x(100x100)/1000x0.5 gms. 1301 = 29452.40 gms Say 0.295 q quint 0.295 LABOUR 0116 Fitter Day 2.30 0114 Beldar Day 5.25 9999 Sundries including testing of samples L.S. 63.70 Add water charges @ 1% on

Rate

1750.00 301.00 247.00 1.49 Total: 2600.21

Add C.P & OH @15% on 2626.21 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 3020.14 Rs 3020.15

Item Code: 18.80.12 Disinfecting CI water mains with wate r containing bleaching powder 600 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity MATERIAL Bleaching powder 3x (3.1416/4)x(600/10)^2 x (100x100)/100x0.5gms 1301 = 42411.5 gms Say 0.424 q quint 0.424 LABOUR 0116 Fitter Day 2.62 0114 Beldar Day 5.91 9999 Sundries including testing of samples L.S. 71.37 Add water charges @ 1% on

Rate

1750.00 301.00 247.00 1.49 Total: 3096.73

Add C.P & OH @15% on 3127.70 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

DSR-12

Rs 3596.86 Rs 3596.85

Page 938 of 2298

Item Code: 18.81.1 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 80 mm diameter C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.003 1750.00 0116 Fitter Day 0.11 301.00 0114 Beldar Day 0.49 247.00 9999 Sundries including testing of samples L.S. 4.42 1.49 Total: Add water charges @ 1% on 165.98 Add C.P & OH @15% on 167.64 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 192.79 Rs 192.80

Item Code: 18.81.2 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 100 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.004 1750.00 0116 Fitter Day 0.16 301.00 0114 Beldar Day 0.57 247.00 9999 Sundries including testing of samples L.S. 4.42 1.49 Total: Add water charges @ 1% on 202.54 Add C.P & OH @15% on 204.57 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 235.26 Rs 235.25

Item Code: 18.81.3 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 125 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.006 1750.00 LABOUR: 0116 Fitter Day 0.22 301.00 0114 Beldar Day 0.66 247.00 9999 Sundries including testing of samples L.S. 5.46 1.49 Total: Add water charges @ 1% on 247.88 Add C.P & OH @15% on 250.36 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

DSR-12

Rs 287.91 Rs 287.90

Page 939 of 2298

Item Code: 18.81.4 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 150 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.009 1750.00 LABOUR: 0116 Fitter Day 0.27 301.00 0114 Beldar Day 0.74 247.00 9999 Sundries including testing of samples L.S. 7.15 1.49 Total: Add water charges @ 1% on 290.45 Add C.P & OH @15% on 293.35 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 337.35 Rs 337.35

Item Code: 18.81.5 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 200 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.016 1750.00 0116 Fitter Day 0.58 301.00 0114 Beldar Day 0.90 247.00 9999 Sundries including testing of samples L.S. 9.88 1.49 Total: Add water charges @ 1% on 439.60 Add C.P & OH @15% on 444.00 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 510.60 Rs 510.60

Item Code: 18.81.6 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 250 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.025 1750.00 LABOUR: 0116 Fitter Day 0.60 301.00 0114 Beldar Day 1.10 247.00 9999 Sundries including testing of samples L.S. 10.79 1.49 Total: Add water charges @ 1% on 512.13 Add C.P & OH @15% on 517.25 Cost for 100.00 m Rate per 100 Metre:

DSR-12

Rs 594.84

Page 940 of 2298

Rate as per DSR-12:

Rs 594.86

Item Code: 18.81.7 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 300 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.035 1750.00 LABOUR: 0116 Fitter Day 0.60 301.00 0114 Beldar Day 1.30 247.00 9999 Sundries including testing of samples L.S. 13.52 1.49 Total: Add water charges @ 1% on 583.09 Add C.P & OH @15% on 588.92 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 677.26 Rs 677.25

Item Code: 18.81.8 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 350 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.048 1750.00 LABOUR: 0116 Fitter Day 0.70 301.00 0114 Beldar Day 1.50 247.00 9999 Sundries including testing of samples L.S. 16.12 1.49 Total: Add water charges @ 1% on 689.22 Add C.P & OH @15% on 696.11 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 800.53 Rs 800.55

Item Code: 18.81.9 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 400 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.063 1750.00 LABOUR: 0116 Fitter Day 0.80 301.00 0114 Beldar Day 1.70 247.00 9999 Sundries including testing of samples L.S. 17.94 1.49 Total: Add water charges @ 1% on 797.68 Add C.P & OH @15% on

DSR-12

805.66

Page 941 of 2298

Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 926.51 Rs 926.50

Item Code: 18.81.10 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 450 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.08 1750.00 LABOUR: 0116 Fitter Day 0.90 301.00 0114 Beldar Day 1.90 247.00 9999 Sundries including testing of samples L.S. 20.67 1.49 Total: Add water charges @ 1% on 911.00 Add C.P & OH @15% on 920.11 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 1058.13 Rs 1058.15

Item Code: 18.81.11 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 500 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.098 1750.00 LABOUR: 0116 Fitter Day 1.00 301.00 0114 Beldar Day 2.10 247.00 9999 Sundries including testing of samples L.S. 23.27 1.49 Total: Add water charges @ 1% on 1025.87 Add C.P & OH @15% on 1036.13 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 1191.55 Rs 1191.55

Item Code: 18.81.12 Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water 600 mm diametre C.I. pipe. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 1301 Bleaching powder quint 0.141 1750.00 LABOUR: 0116 Fitter Day 1.20 301.00 0114 Beldar Day 2.50 247.00 9999 Sundries including testing of samples L.S. 26.00 1.49 Total:

DSR-12

Page 942 of 2298

Add water charges @ 1% on

1264.19

Add C.P & OH @15% on 1276.83 Cost for 100.00 m Rate per 100 Metre: Rate as per DSR-12:

Rs 1468.35 Rs 1468.35

Item Code: 18.82.1 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 80 mm diameter C.I. pipe.

Code

02.008.01 02.025

0761 0771 0117 0114 9999

Details of Cost for : 40.26 m Description Unit Quantity Details of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x55x0.75 m= 16.61 cum Deduct for pipe 1x40.26x 3.1416/4 x(0.098)^2 m = (-)0.30 cum . total=16.31cum E/W excavation in foundation trenches .. .. All kinds of soil. 16.31 Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints’ making blocks and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

Rate

130.78

16.31

83.80

quint litre

0.373 0.379

450.00 30.00

Day Day L.S.

0.50 4.00 53.82

273.00 247.00 1.49 Total: 1383.91

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 1397.75 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 126.86 Rs 150.70

Item Code: 18.82.2 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 100 mm diametre C.I. pipe.

Code

02.008.01 02.025

0761 0771

DSR-12

Details of Cost for : 40.26 m Description Unit Quantity Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x55x0.75 m=16.61 cum Deduct for pipe 1x40.26x 3.141`6/4 x(0.098)^2 m = (-)0.44 E/W excavation in foundation trenches .. .. All kinds of soil. 16.17 Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints,making blockst and stacking MATERIALS Fuel wood required Kerosene oil

Rate

130.78

Cum

16.17

83.80

quint litre

0.466 0.379

450.00 30.00

Page 943 of 2298

0117 0114 9999

LABOUR Assistant Filter Beldar Sundries and carriage

Day Day L.S.

0.63 4.50 53.82

Add water charges @ 1% except on [A]+[B] i.e on

273.00 247.00 1.49 Total: 1584.75

Add C.P & OH @15% except on [A]+[B] i.e on 1600.60 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 131.90 Rs 155.55

Item Code: 18.82.3 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 125 mm diametre C.I. pipe.

Code

02.008.01 02.025

0761 0771 0117 0114 9999

Details of Cost for : 40.26 m Description Unit Quantity Detaila of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x55x0.75 m= 16.61 cum Deduct for pipe 1x40.26x 3.1416/4 x(0.144)^2/4 =(-) 0.65cum total=15.96cum E/W excavation in foundation trenches .. .. All kinds of soil. 15.96 Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints,and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

Rate

130.78

15.96

83.80

quint litre

0.559 0.568

450.00 30.00

Day Day L.S.

0.75 5.00 53.82

273.00 247.00 1.49 Total: 1788.53

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 1806.42 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 136.66 Rs 160.00

Item Code: 18.82.4 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 150 mm diametre C.I. pipe.

02.008.01

Details of Cost for : 40.26 m Description Unit Quantity Detaila of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x55x0.75 m= 16.61 cum Deduct for pipe 1x40.26x 3.1416/4 x (0.17)^2 =(-) 0.91 cum E/W excavation in foundation trenches .. .. All kinds of soil. 15.70

02.025

Filling available excavated earth (excluding rock) .. ..

Code

DSR-12

15.70

Rate

130.78 83.80

Page 944 of 2298

0761 0771 0117 0114 9999

Breaking lead caulked joints,making blocks and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

quint litre

0.653 0.568

450.00 30.00

Day Day L.S.

0.887 5.50 67.21

273.00 247.00 1.49 Total: 2011.68

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 2031.80 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 141.72 Rs 164.60

Item Code: 18.82.5 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 200 mm diametre C.I. pipe.

Code

02.008.01 02.025

0761 0771 0117 0114 9999

Details of Cost for : 40.26 m Description Unit Quantity Detaila of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x60x0.75 m=18.12 cum = 16.56 cum Deduct for pipe 1x40.26x 3.1416/4 x (0.222)^2 (-) 1.56cum Total=16.56cum E/W excavation in foundation trenches .. .. All kinds of soil. 16.56 Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints making block and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

Rate

130.78

16.56

83.80

quint litre

0.84 0.7576

450.00 30.00

Day Day L.S.

1.10 6.50 67.21

273.00 247.00 1.49 Total: 2406.67

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 2430.74 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 157.69 Rs 181.90

Item Code: 18.82.6 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 250 mm diametre C.I. pipe.

Code

DSR-12

Details of Cost for : 40.26 m Description Unit Quantity Detaila of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x.65x0.75m= 19.63 Deduct for pipe 1x40.26x 3.1416/4 x (0.274)^2

Rate

Page 945 of 2298

02.008.01 02.025

0761 0771 0117 0114 9999

= (-) 2.37 cum = 17.26 E/W excavation in foundation trenches .. .. All kinds of soil.

17.26

130.78

17.26

83.80

quint litre

1.026 1.1365

450.00 30.00

Day Day L.S.

1.30 7.50 80.73

273.00 247.00 1.49 Total: 2823.49

Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints, making blocks and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 2851.72 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 173.45 Rs 198.65

Item Code: 18.82.7 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 300 mm diametre C.I. pipe.

Code

02.008.01 02.025

0761 0771 0117 0114 9999

Description Detaila of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x.65x0.75m= 19.63 = 21.14 cum Deduct for pipe 1x40.26x 3.1416/4 x (0.274)^2 = (-) 2.37 cum = 17.26 4 E/W excavation in foundation trenches .. .. All kinds of soil. Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints. making blocks and stacking MATERIALS Fuel wood Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

Details of Cost for : 40.26 m Unit Quantity

Rate

17.79

130.78

17.79

83.80

quint litre

1.12 1.515

450.00 30.00

Day Day L.S.

1.50 8.50 94.12

273.00 247.00 1.49 Total: 3198.69

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 3230.68 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 187.10 Rs 213.10

Item Code: 18.82.8 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 350 mm diametre C.I. pipe. Details of Cost for : 40.26 m

DSR-12

Page 946 of 2298

Code

02.008.01 02.025

0761 0771 0117 0114 9999

Description Unit Details of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x.75x0.75 m=22.65 cum Deduct for pipe 1x40.26x 3.1416 x (0378)^2/4 = (-) 4.51cum = 18.14 cum E/W excavation in foundation trenches .. .. All kinds of soil. Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints,making blocks and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

Quantity

Rate

18.14

130.78

18.14

83.80

quint litre

1.213 1.515

450.00 30.00

Day Day L.S.

1.75 9.50 107.64

273.00 247.00 1.49 Total: 3575.93

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 3611.69 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 199.85 Rs 226.35

Item Code: 18.82.9 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 400 mm diametre C.I. pipe.

Code

02.008.01 02.025

0761 0771 0117 0114 9999

Description Details of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x.80x0.75 m=24.16 cum Deduct for pipe 1x40.26x 3.1416 x (0.429)^2/4 = (-) 5.93cum = 18.23 E/W excavation in foundation trenches .. .. All kinds of soil. Filling available excavated earth (excluding rock) .. .. Breaking lead caulked jointsmaking blocks and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

Details of Cost for : 40.26 m Unit Quantity

Rate

18.23

130.78

18.23

83.80

quint litre

1.306 1.894

450.00 30.00

Day Day L.S.

2.00 10.50 121.03

273.00 247.00 1.49 Total: 3964.35

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 4003.99 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 211.53 Rs 238.15

Page 947 of 2298

Item Code: 18.82.10 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 450 mm diametre C.I. pipe.

Code

02.008.01 02.025

0761 0771 0117 0114 9999

Details of Cost for : 40.26 m Description Unit Quantity Detaila of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x.85x0.75 m=25.67 cum. Deduct for pipe 1x40.26x 3.1416 x (0.48)^2/4 = (-) 7.29cum =18.38 cum. E/W excavation in foundation trenches .. .. All kinds of soil. 18.38 Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints, blocks and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

Rate

130.78

18.38

83.80

quint litre

1.40 2.273

450.00 30.00

Day Day L.S.

2.25 11.50 134.55

273.00 247.00 1.49 Total: 4353.42

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 4396.95 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 223.56 Rs 250.40

Item Code: 18.82.11 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 500 mm diametre C.I. pipe.

Code

02.008.01 02.025

0761 0771 0117 0114 9999

Details of Cost for : 40.26 m Description Unit Quantity Detaila of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x.90x0.75m=27.18cum Deduct for pipe 1x40.26x 3.1416 x (0.532)^2/4 = (-) 8.94cum = 18.24cum E/W excavation in foundation trenches .. .. All kinds of soil. 18.24 Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints, blocks and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

Rate

130.78

18.24

83.80

quint litre

1.492 2.652

450.00 30.00

Day Day L.S.

2.50 12.50 147.94

273.00 247.00 1.49 Total: 4741.39

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 4788.80 Cost for 40.26 m

DSR-12

Page 948 of 2298

Rate per One Metre: Rate as per DSR-12:

Rs 234.01 Rs 260.65

Item Code: 18.82.12 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 600 mm diametre C.I. pipe.

Code

02.008.01 02.025

0761 0771 0117 0114 9999

Details of Cost for : 40.26 m Description Unit Quantity Detaila of cost for 40.26 m or 11 nos. joints. Earth work in excavationfor dismantling pipes including refilling of excavated earth 1x40.26x1.00x0.75 m=30.20 cum Deduct for pipe 1x40.26x 3.1416 x (0.635) = (-) 12.76cum 17.44 cum. E/W excavation in foundation trenches .. .. All kinds of soil. Cum 17.44 Filling available excavated earth (excluding rock) .. .. Breaking lead caulked joints, making blocks and stacking MATERIALS Fuel wood required Kerosene oil LABOUR Assistant Filter Beldar Sundries and carriage

quint litre Day Day L.S.

Rate

130.78

17.44

83.80

1.68 3.41

450.00 30.00

3.00 14.50 174.85

273.00 247.00 1.49 Total: 5519.33

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 5574.52 Cost for 40.26 m Rate per One Metre: Rate as per DSR-12:

Rs 252.19 Rs 277.65

Item Code: 18.83.1 Labour for cutting C.I. pipe with steel saw : 80 mm diameter C.I. pipe. Code

0116 0114 9999

Details of Cost for : 1.00 nos Unit Quantity

Description Detail of cost for one cut. LABOUR Fitter Belder Sundries

Day Day L.S.

0.06 0.06 1.82

Add water charges @ 1% on

Rate

301.00 247.00 1.49 Total: 35.59

Add C.P & OH @15% on 35.95 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 41.34 Rs 41.35

Item Code: 18.83.2 Labour for cutting C.I. pipe with steel saw : 100 mm diametre C.I. pipe. Code

DSR-12

Description

Details of Cost for : 1.00 nos Unit Quantity

Rate

Page 949 of 2298

0116 0114 9999

Detail of cost for one cut. LABOUR Fitter. Belder Sundries

Day Day L.S.

0.08 0.08 2.73

Add water charges @ 1% on

301.00 247.00 1.49 Total: 47.91

Add C.P & OH @15% on 48.39 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 55.65 Rs 55.65

Item Code: 18.83.3 Labour for cutting C.I. pipe with steel saw : 125 mm diametre C.I. pipe. Code

0116 0114 9999

Details of Cost for : 1.00 nos Unit Quantity

Description Detail of cost for one cut. LABOUR Fitter. Belder Sundries

Day Day L.S.

0.11 0.11 4.42

Add water charges @ 1% on

Rate

301.00 247.00 1.49 Total: 66.87

Add C.P & OH @15% on 67.54 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 77.67 Rs 77.65

Item Code: 18.83.4 Labour for cutting C.I. pipe with steel saw : 150 mm diametre C.I. pipe. Code

0116 0114 9999

Details of Cost for : 1.00 nos Unit Quantity

Description Detail of cost for one cut. LABOUR Fitter Belder Sundries

Day Day L.S.

0.15 0.15 5.33

Add water charges @ 1% on

Rate

301.00 247.00 1.49 Total: 90.14

Add C.P & OH @15% on 91.04 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 104.70 Rs 104.70

Item Code: 18.83.5 Labour for cutting C.I. pipe with steel saw : 200 mm diametre C.I. pipe. Code

0116

DSR-12

Description Detail of cost for one cut. LABOUR Fitter

Details of Cost for : 1.00 nos Unit Quantity

Day

0.20

Rate

301.00

Page 950 of 2298

0114 9999

Belder Sundries

Day L.S.

0.20 7.15

Add water charges @ 1% on

247.00 1.49 Total: 120.25

Add C.P & OH @15% on 121.45 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 139.67 Rs 139.65

Item Code: 18.83.6 Labour for cutting C.I. pipe with steel saw : 250 mm diametre C.I. pipe. Code

0116 0114 9999

Details of Cost for : 1.00 nos Unit Quantity

Description Detail of cost for one cut. LABOUR Fitter Belder Sundries

Day Day L.S.

0.25 0.25 8.06

Add water charges @ 1% on

Rate

301.00 247.00 1.49 Total: 149.01

Add C.P & OH @15% on 150.50 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 173.08 Rs 173.10

Item Code: 18.83.7 Labour for cutting C.I. pipe with steel saw : 300 mm diametre C.I. pipe. Code

0116 0114 9999

Details of Cost for : 1.00 nos Unit Quantity

Description Detail of cost for one cut. LABOUR Fitter Belder Sundries

Day Day L.S.

0.30 0.30 9.88

Add water charges @ 1% on

Rate

301.00 247.00 1.49 Total: 179.12

Add C.P & OH @15% on 180.91 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 208.05 Rs 208.05

Item Code: 18.83.8 Labour for cutting C.I. pipe with steel saw : 350 mm diametre C.I. pipe. Code

0116 0114 9999

DSR-12

Description Detail of cost for one cut. LABOUR Fitter Belder Sundries

Details of Cost for : 1.00 nos Unit Quantity

Day Day L.S.

0.35 0.35 10.79

Rate

301.00 247.00 1.49 Total:

Page 951 of 2298

Add water charges @ 1% on

207.88

Add C.P & OH @15% on 209.96 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 241.45 Rs 241.45

Item Code: 18.83.9 Labour for cutting C.I. pipe with steel saw : 400 mm diametre C.I. pipe. Code

0116 0114 9999

Details of Cost for : 1.00 nos Unit Quantity

Description Detail of cost for one cut. LABOUR Fitter Belder Sundries

Day Day L.S.

0.40 0.40 12.48

Add water charges @ 1% on

Rate

301.00 247.00 1.49 Total: 237.80

Add C.P & OH @15% on 240.18 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 276.21 Rs 276.20

Item Code: 18.83.10 Labour for cutting C.I. pipe with steel saw : 450 mm diametre C.I. pipe. Code

0116 0114 9999

Details of Cost for : 1.00 nos Unit Quantity

Description Detail of cost for one cut. LABOUR Fitter Belder Sundries

Day Day L.S.

0.45 0.45 13.52

Add water charges @ 1% on

Rate

301.00 247.00 1.49 Total: 266.74

Add C.P & OH @15% on 269.41 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 309.82 Rs 309.80

Item Code: 18.83.11 Labour for cutting C.I. pipe with steel saw : 500 mm diametre C.I. pipe. Code

0116 0114 9999

DSR-12

Description Detail of cost for one cut. LABOUR Fitter Belder Sundries

Details of Cost for : 1.00 nos Unit Quantity

Day Day L.S.

0.50 0.50 15.21

Rate

Add water charges @ 1% on

301.00 247.00 1.49 Total: 296.66

Add C.P & OH @15% on

299.63

Page 952 of 2298

Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 344.57 Rs 344.55

Item Code: 18.83.12 Labour for cutting C.I. pipe with steel saw : 600 mm diametre C.I. pipe. Code

0116 0114 9999

Description Detail of cost for one cut. LABOUR Fitter Belder Sundries

Details of Cost for : 1.00 nos Unit Quantity

Day Day L.S.

0.60 0.60 16.12

Add water charges @ 1% on

Rate

301.00 247.00 1.49 Total: 352.82

Add C.P & OH @15% on 356.35 Cost for 1.00 nos Rate per Each Cut: Rate as per DSR-12:

Rs 409.80 Rs 409.80

Item Code: 18.84.1 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology - 15 mm nominal bore. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 3327 15 mm Battery Based Sensor Pillar Cock Nos 1.00 5822.50 9999 Carriage of materials and fixing charges L.S. 8.06 1.49 Total: Add water charges @ 1% on 5834.51 Add C.P & OH @15% on 5892.86 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6776.79 Rs 6776.80

Item Code: 19.1.1 P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 100 mm diameter Details of Cost for : 30.00 m Code Description Unit Quantity Rate MATERIALS 1854 (i)100 mm stone ware pipes 60 cm long each 55.00 36.00 2224 (ii)Carriage of pipes 100 m 33.00 116.80 Added 10% allowance for breakage in items (I) & (II) 0367 Cement of 50 joints = 0.019 tonne tonne 0.019 5000.00 2209 Carriage of cement tonne 0.019 77.87 0983 Fine sand cum 0.01 640.00 2261 Carriage of fine sand cum 0.01 87.60 1881 Spun yarn or plain gaskin @ 0.09 kg per joint kilog 4.50 40.00 = 0.09x50 = 4.50 kg LABOUR

DSR-12

Page 953 of 2298

0123 0124 0114 0101

Mason 1st class Mason 2nd class Beldar Bhishti

Day Day Day Day

1.00 1.00 3.00 1.00

Add water charges @ 1% on

301.00 273.00 247.00 260.00 Total: 3877.30

Add C.P & OH @15% on 3916.07 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 150.12 Rs 150.10

Item Code: 19.1.2 P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 150 mm diameter Details of Cost for : 30.00 m Code Description Unit Quantity Rate MATERIALS 1855 (i) 150 mn stone.ware pipes 60 cm long each 55.00 53.00 2225 (ii) Carriage of pipes 100 m 33.00 233.60 Added 10% allowance for breakage in items (i) & (ii) 0367 Cement of 50 joints = 0.036 tonne tonne 0.036 5000.00 2209 Carriage of cement tonne 0.036 77.87 0983 Fine sand cum 0.019 640.00 2261 Carriage of fine sand cum 0.019 87.60 1881 Spun yarn or plain gaskin @ 0.18 kg per joint kilog 9.00 40.00 = 0.18x50 = 9 kg LABOUR 0123 Mason 1 st class Day 1.50 301.00 0124 Mason 2nd class Day 1.50 273.00 0114 Beldar Day 4.00 247.00 0101 Bhishti Day 1.00 260.00 Total: Add water charges @ 1% on 5657.71 Add C.P & OH @15% on 5714.29 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 219.05 Rs 219.05

Item Code: 19.1.3 P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 200 mm diameter Details of Cost for : 30.00 m Code Description Unit Quantity Rate MATERIALS 1856 (i) 200 mm stone ware pipes 60 cm long each 55.00 91.00 2226 Carraige of S.W. pipes200 mm dia 100 m 33.00 389.33 Added 10% allowance for breakage in items (i)&(ii) 0367 Cement of 50 joints = 0.053 tonne tonne 0.053 5000.00 2209 Carriage of cement tonne 0.053 77.87 0983 Fine sand cum 0.028 640.00 2261 Carriage of fine sand cum 0.028 87.60

DSR-12

Page 954 of 2298

1881

0123 0124 0114 0101

Spun yarn or plain gaskin @ 0.24 kg per joint = 0.24x50 =12.00 kg LABOUR Mason 1st class Mason (brick layer) 2nd class Beldar Bhishti

kilog

12.00

40.00

Day Day Day Day

1.75 1.75 4.50 1.25

301.00 273.00 247.00 260.00 Total: 8343.98

Add water charges @ 1% on

Add C.P & OH @15% on 8427.42 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 323.05 Rs 323.05

Item Code: 19.1.4 P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 250 mm diameter Details of Cost for : 30.00 m Code Description Unit Quantity Rate MATERIALS 1858 Stoneware pipes grade A (60 cm long) 250 mm dia each 55.00 130.00 Qty including 10% for breakage 2228 Carraige of S.W. pipes250 mm dia 100 m 33.00 667.43 0367 Cement of 50 joints = 0.094 tonne tonne 0.094 5000.00 2209 Carraige of Cement tonne 0.094 77.87 0983 Fine sand (zone IV) cum 0.05 640.00 2261 Carraige of Fine sand (1 part badarpur sand : 2 parts jamuna cum 0.05 87.60 sand) 1881 Spun yarn or plain gaskin @ 0.30 kg per joint = 0.30x50 =15.00 kilog 15.00 40.00 kg LABOUR 0123 Mason 1st class Day 2.25 301.00 0124 Mason (brick layer) 2nd class Day 2.25 273.00 0114 Beldar Day 5.50 247.00 0101 Bhishti Day 1.50 260.00 Total: Add water charges @ 1% on 11523.95 Add C.P & OH @15% on 11639.19 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 446.17 Rs 446.15

Item Code: 19.1.5 P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 250 mm diameter Details of Cost for : 30.00 m Code Description Unit Quantity Rate MATERIALS 1858 (i) 250 mm stone ware pipes 60 cm long each 55.00 130.00 2228 (ii) Carriage of pipes 100 m 33.00 667.43 Added 10% allowance for breakage in items (i) & (ii) 0367 Cement of 50 joints = 0.094 tonne tonne 0.094 5000.00 2209 Carriage of cement tonne 0.094 77.87

DSR-12

Page 955 of 2298

0983 2261 1881

0123 0124 0114 0101

Fine sand Carriage of fine sand Spun yarn or plain gaskin @ 0.30 kg per joint = 0.30x50= 15.00 kg LABOUR Mason 1st class Mason 2nd class Beldar Bhishti

cum cum kilog

0.05 0.05 15.00

640.00 87.60 40.00

Day Day Day Day

2.25 2.25 5.50 1.50

301.00 273.00 247.00 260.00 Total: 11523.95

Add water charges @ 1% on

Add C.P & OH @15% on 11639.19 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 446.17 Rs 597.85

Item Code: 19.2.1 P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 100 mm diameter S.W. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Area = W x (W/2) + 112x (3.14/4 x W.W ) (3.14/4 xd^2 ) = W x {sqr(A) + 0.5 x 3.14/4 } - (3.14/4 x d^2) Where W = D + X D = 100 + 12 + 12 = 124 mm or 12.4 cm X = 300 mm as trench depth is less than 1200 mm Area = (30.0 + 12.4) (0.5 + 3.14x1/8) - (3.14/2)R^2 = (42.4)^2 (0.5 + 3.14/8) - 3.14/4x(12.4)^2 = (1797.76) (0.89) - 0.7854x153.76 = 1600.01-120.76 = 1479.2 sq.cm. = 0.1479 sqm Say 0.148 sqm For 10 m length qty. of concrete reqd. = 1.48 cum 04.001.10 P/L CC excluding centering - All work up to plinth level: 1:5:10 1.48 3357.38 Coarse sand, 40mmstone Total: Add water charges @ 1% except on [A] i.e on 0.00 Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 496.89 Rs 496.90

Item Code: 19.2.2 P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 150 mm diameter S.W. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Area = W x (W/2) + 1/2 x (3.14/4 x W^2 ) - (3.14/4 x d^2) = W x { / + 14 x (3.14/4)} - (3.14/4 x d ) Where W = D + X D = 150+ 16+ 16= 182 mm or 18.2 cm X = 300 mm as trench depth is less than 1200 mm Area = (30.0 + 18.2)^2 (0.5 + 3.14x1/8) - 3.14x¼x(18.2)^2 = (48.2)^2 (0.5 + 3.14/8) - 3.14/4x(18.2)^2

DSR-12

Page 956 of 2298

04.001.10

= (2323.24) (0.89)-260.02 = 2067.68 -260.02 = 1807.66 sq.cm. = 0.1808 sqm Say 0.181 sqm For 10 m length qty. of concrete reqd. = 1.81 cum P/L CC excluding centering - All work up to plinth level: 1:5:10 Coarse sand, 40mmstone

1.81

3357.38

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 607.69 Rs 607.70

Item Code: 19.2.3 P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. .. 200 mm diameter S.W. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Area = W x (W/2) + 1/2 x (3.14/4 x W^2 ) - (3.14/4 xd^2 ) = W^2 x {1/2 + 1/2 x (3.14/4)} - (3.14/4 x d^2 ) Where W = D + X D = 200 + 17 + 17 = 234 mm or 23.4 cm X = 300 mm as trench depth is less than 1200 mm Area = (30.0 + 23.4)^2 (0.5 + 3.14x1/8) 3.14x 1/4x(23.4)^2 = (53.4)^2 (0.5 + 3.14/8) - 3.14/4x(23.4)^2 = (2851.56) (0.89)-429.83 = 2537.89 -429.83 =2108.06 sq.cm. = 0.2108 sqm Say 0.211 sqm For 10 m length qty. of concrete reqd. = 2.11 cum 04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Coarse sand, 40mmstone

2.11

3357.38

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 708.41 Rs 708.40

Item Code: 19.2.4 P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. .. 250 mm diameter S.W. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Area = W x (W/2) + 1/2 x (3.14/4 x W^2 ) - (3.14/4 xd^2 ) = W^2 x {1/2 + 1/2 x (3.14/4)} - (3.14/4 x d^2 ) Where W = D + X D = 250 + 20 + 20 = 290 mm or 29.0 cm X = 300 mm as trench depth is less than 1200 mm W=29 + 30 = 59cm Area = (30.0 + 29)^2 (0.5 + 3.14x1/8) 3.14x 1/4x(29)^2 = (53.4)^2 (0.5 + 3.14/8) - 3.14/4x(23.4)^2

DSR-12

Page 957 of 2298

= 2447 sq.cm. = 0.2447 sqm Say 0.244 sqm For 10 m length qty. of concrete reqd. = 2.44 cum 04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Coarse sand, 40mmstone

2.44

3357.38

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 819.20 Rs 819.20

Item Code: 19.3.1 P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)up to haunches.. including bed concrete as per standard design : 100mm diameter S.W. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Area = WxDl + 2x½xR Cot QxR[R^2 /2(3.14/2-Q)] - (3.14/2)R^2 = WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R = WDl+R^2 (CotQ-3.14 + Q) Where Sin Q = [R/(W/2)] = 2R/W W = D + X ; X = 300 mm, D = 100 + 12 + 12 = 124 mm W= 124+ 300 = 424 mm D1 = Depth = 100 + (½ x 124) = 162 mm R = 62 mm Sin Q = (2x62)/424 = 0.292 thereforeQ = 17°0' Hence Tan Q = 0.3057 Area = 424 x 162 + (62)^2 (Cot Q - 3.14 + Q) = *68688 + 3844 (1/0.3057 - 180° + 17°0')+ sqmm = *68688 + 3844 (3.27 - 163°0' x 3.14/180)+ sqmm = (68688 + 3844 x 0.43) sqmm = (68688 + 1652.92) sqmm = 70340.92 sqmm Say 70341 sqmm or 0.070341 sqm For 10 m length qty. of concrete reqd. = 0.07034x10 = 0.7034 cum 04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Coarse sand, 40mmstone

0.7034

3357.38

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 236.16 Rs 236.15

Item Code: 19.3.2 P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 150 mm diameter S.W. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Area = WxDl + 2x½xRcot Q R[R^2 /2(3.14/2-Q)] -(3.14/2)R^2

DSR-12

Page 958 of 2298

=WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R = WD1 + R^2 (Cot Q - 3.14 + Q) Where Sin Q = [R/(W/2)] = 2R/W W = D + X;X = 300mm, D= 150+ 16+ 16 = 182 mm W= 182 + 300 = 482 mm D1 = Depth = 150 + (½ x 182) = 241 mm R = 91 mm Sin Q = (2x91)/482 = 0.3776 therefore Q = 22°12' Hence Tan Q = 0.4081 Area = 482x241 +(91)^2 (Cot Q - 3.14 + Q) = *116162 + 8281 (1/0.4081-180° +22°12')+ sqmm = *116162 + 8281 (2.45-157°48’x3.14/180)+ sqmm = [116162 + 8281 x (2.45-2.75)] sqmm = [116162 + 8281 x (-0.30)] sqmm = (116162 - 2484.3) sqmm = 113677.7 sqmm Say 113677.7 sqmm or 0.1136777 sqm For 10 m length qty. of concrete reqd. = 0.1136777x10= 1.136777 cum Say 1.14 cum 04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Coarse sand, 40mmstone

1.14

3357.38

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 382.74 Rs 382.75

Item Code: 19.3.3 P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 200 mm diameter S.W. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Area = WxDl + 2x½xR Cot Q.R.[R^2 /2(3.14/2-Q)] -(3.14/2)R^2 =WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R = WD1 + R^2 (Cot Q - 3.14 + Q) Where Sin Q = [R/(W/2)] = 2R/W W = D + X ; X = 300 mm, D = 200 + 17 + 17 = 234 mm W = 234 + 300 = 534 mm D1 = Depth = 150 + (½ x 234) = 267 mm R= 117mm Sin Q = (2x117)/534 = 0.4382 thereforeQ = 26°0' Hence Tan Q = 0.4877 Area = 534 x 267 + (117)^2 (Cot Q - 3.14 + Q) = *142578 + 13689 (1/0.4877-180° + 26°0')+ sqmm = *142578 + 13689 (2.05- 54°0' x 3.14/180)+ sqmm = [142578 + 13689 x (2.05-2.69)] sqmm = [142578 + 13689 x (-0.64)] sqmm = (142578 - 8760.96) sqmm = 133817.04 sqmm Say 133817 sqmm or 0.134 sqm For 10 m length qty. of concrete reqd. = 0.134x10= 1.34 cum

DSR-12

Page 959 of 2298

04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Coarse sand, 40mmstone

1.34

3357.38

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 449.89 Rs 449.90

Item Code: 19.3.4 P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 250 mm diameter S.W. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Area = WxDl + 2x½xR Cot Q.R.[R^2 /2(3.14/2-Q)] -(3.14/2)R^2 =WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R = WD1 + R^2 (Cot Q - 3.14 + Q) Where Sin Q = [R/(W/2)] = 2R/W W = D + X ; X = 300 mm, D = 250 + 20 + 20 = 290 mm W = 290 + 300 = 590 mm D1 = Depth = 150 + (½ x 234) = 267 mm R= 117mm Sin Q = (2x145)/590 = 0.49154 thereforeQ = 29°26' Hence Tan Q = 0.5635 Area = 590 x 295 + (145)^2 (Cot Q - 3.14 + Q) = *174050 + 21025 (1/0.5635-180° + 26°26')+ sqmm = *174050 + 21025 (1.77- 150°34' x 3.14/180)+ sqmm = [174050 + 21025 x (1.77-2.63)] sqmm = [174050 + 21025 x (-0.86)] sqmm = (174050 - 18081.5) sqmm = 155968.5 sqmm Say 155968 sqmm or 0.156 sqm For 10 m length qty. of concrete reqd. = 0.156x10= 1.56 cum

04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Coarse sand, 40mmstone

1.56

3357.38

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 523.75 Rs 523.75

Item Code: 19.3.5 P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 250 mm diameter S.W. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate Area = WxDl + 2x½xR Cot Q.R.[R^2 /2(3.14/2-Q)] -(3.14/2)R^2 =WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R

DSR-12

Page 960 of 2298

= WD1 + R^2 (Cot Q - 3.14 + Q) Where Sin Q = [R/(W/2)] = 2R/W W = D + X ; X = 300 mm, D = 250 + 20 + 20 = 290 mm W = 290 + 300 = 590 mm Dl = Depth = 150 + QA x 290) = 295 mm R = 145 mm Sin Q = (2xl45)/590 = 0.49154 therefore Q = 29°26' Hence Tan Q = 0.5635 Area = 590 x 295 + (145)^2 (Cot Q - 3.14 + Q) =*174050 + 21025(1/0.5635- 180° + 29°26')+ sqmm = *174050 + 21025(1.77- 150°34’x 3.14/180)] sqmm = [ 174050 + 21025 x (1.77-2.63)] sqmm = [ 174050 + 21025 x (-0.86)] sqmm = (174050 - 18081.5) sqmm = 155968.5 sqmm Say 155968 sqmm or 0.156 sqm For 10 m length qty. of concrete reqd. = 0.156x10= 1.56 cum -” 04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Coarse sand, 40mmstone

1.56

3357.38

Add water charges @ 1% except on [A] i.e on

Total: 0.00

Add C.P & OH @15% except on [A] i.e on 0.00 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 523.75 Rs 604.35

Item Code: 19.4.1.1 P/Fsquare-mouth S.W. gully trap grade 'A'' water tight C.I. cover with frame of 300x300mm : 100x100 mm size P type With F.P.S. Bricks class designation 75 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate 1900 100x100mm P' type Gully trap each 1.00 70.00 1364 CI grating 100x100mm each 1.00 15.00 1352 CI cover with frame 300x300mm inside (4.5+2.7 kg) each 1.00 280.00 9999 Carriage of materials L.S. 4.50 1.49 Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 0.68x0.68x0.10 m = 0.046 cum Concrete around trap 0.30x0.30x0.675 m = 0.061 cum =0.107 cum Deduct: 0.345/3x[0.09+0.01+(0.09x0.01)l/2] = 0.015 cum 3.14/4x(0.124)^2 x0.47 = 0.006 cum = 0.021 cum Net quantity 0.107 cum (-) 0.021 cum = 0.086 cum say 0.09 cum

DSR-12

Page 961 of 2298

04.001.11

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Fine sand, 40mmstone ag Brick work with 75 class designation brick in cement mortar 1:4(1 cement: 4 coarse sand) 1.66x0.115x0.675 m = 0.129 cum say 0.13 cum

0.09

3087.47

06.001.01

Brick work with F.P.S. bricks of class desgn 75 in foundation Cum and plinth in: CM 1:4 (1 cem 1.66x0.115x0.04 m = 0.008 cum (Rate as per item 4.2.3 of S.H. : concrete

0.13

3508.25

04.002.03

P/L CC walls string courses, coping, bed blocks, window sills Cum ,etc. up to floor five level 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement: [l/2x0.358x(l.20+0.40)] = 0.286 sqm say 0.29 sqm

0.008

5272.38

13.009.01

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a Sqm floating coat of neat cement.

0.29

173.09

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 371.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 375.43 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1258.06 Rs 1256.35

Item Code: 19.4.1.2 P/Fsquare-mouth S.W. gully trap grade 'A'' water tight C.I. cover with frame of 300x300mm : 100x100 mm size P typeWith Sewer bricks conforming to IS : 4885 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate 1900 100x100 mm Gully trap ‘P’ type each 1.00 70.00 1364 C.I. grating .100x100 mm each 1.00 15.00 1352 C.l. cover with frame 300x300mm inside each 1.00 280.00 9999 Carriage of materials L.S. 4.50 1.49 Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 0.68x0.68x0.10 m = 0.046 cum Concrete around trap 0.30x0.30x0.675 m = 0.061 cum =0.107 cum Deduct: 0.345/3x[0.09+0.01+(0.09x0.01)l/2] = 0.015 cum 3.14/4x(0.124)^2 x0.47 = 0.006 cum = 0.021 cum Net quantity 0.107 cum (-) 0.021 cum = 0.086 cum say 0.09 cum 04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.09 3087.47 Fine sand, 40mmstone ag Brick work with sewer bricksconforming to IS:4885 in cement mortar 1:4(1 cement: 4 coarse sand) 1.66x0.115x0.675 m = 0.129 cum say 0.13 cum 06.036.01 B/W extruded burnt flyash clay sewer bricks in found and 0.13 3794.78 plinth CM 1:4 Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1.66x0.115x0.04 m = 0.008 cum

DSR-12

Page 962 of 2298

04.002.03

13.009.01

P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement: [l/2x0.358x(l.20+0.40)] = 0.286 sqm say 0.29 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

0.008

5272.38

0.29

173.09

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 371.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 375.43 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1295.31 Rs 1293.60

Item Code: 19.4.2.1 P/Fsquare-mouth S.W. gully trap grade 'A'' water tight C.I. cover with frame of 300x300mm : 150 x 100 mm size P type With F.P.S. Bricks class designation 75 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate 1902 S.W. Gully trap ‘P’ type 150x100mm each 1.00 104.00 1366 C.I. grating 150x150 mm each 1.00 25.00 1352 C.l. cover with frame 300x300mm inside each 1.00 280.00 9999 Carriage of materials L.S. 4.50 1.49 Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 0.68x0.68x0.10 m = 0.046 cum Concrete around trap 0.30x0.30x0.675 m = 0.061 cum =0.107 cum Deduct: 0.322/3x[0.09+0.023+(0.09x0.023) 1/2 ] = 0.017 cum 3.14/4x(0.124)^2 x0.485 = 0.006 cum = 0.023 cum Net quantity 0.107 cum (-) 0.023 cum 04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.08 3087.47 Fine sand, 40mmstone ag (Rate as per item 4.1.11 of S.H. : Concrete) Brick work with 75 class designation brick in cement mortar 1:4(1 cement: 4 coarse sand) 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.13 3508.25 and plinth in: CM 1:4 (1 cem Rate as per item no 6.1.1 of SH : Brick Work Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1.66x0.115x0.04 m = 0.008 cum 04.002.03 P/L CC walls string courses, coping, bed blocks, window sills 0.008 5272.38 ,etc. up to floor five level 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement: [l/2x0.337x(l.20+0.60)] = 0.303 sqm say 0.30 sqm 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 0.30 173.09 floating coat of neat cement. Total: Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on 415.71 Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 419.87 Cost for 1.00 No.

DSR-12

Page 963 of 2298

Rate per Each: Rate as per DSR-12:

Rs 1280.03 Rs 1278.30

Item Code: 19.4.2.2 P/L SW gully trap with CI grating, masonry chamber and CI cover with frame : 150 x 100 mm size P type 4885. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost of one gully trap 1902 S.W. Gully trap ‘P’ type150x100 mm each 1.00 1366 C.I. grating .150x150 mm each 1.00 1352 C.l. cover with frame 300x300mm inside each 1.00 9999 Carriage of materials L.S. 4.50 Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 0.68x0.68x0.10 m = 0.046 cum Concrete around trap 0.30x0.30x0.675 m = 0.061 cum =0.107 cum Deduct: 0.322/3x[0.09+0.023+(0.09x0.023) 1/2 ] = 0.017 cum 3.14/4x(0.124)^2 x0.485 = 0.006 cum = 0.023 cum Net quantity 0.107 cum (-) 0.023 cum 04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.08 Fine sand, 40mmstone ag (Rate as per item 4.1.11 of S.H. : Concrete) Brick work with sewer bricks conforming to IS: 4885 in cement mortar 1:4(1 cement: 4 coarse sand) 06.036.01 B/W extruded burnt flyash clay sewer bricks in found and 0.13 plinth CM 1:4 Rate as per item no 6.36.1 of SH : Brick Work Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1.66x0.115x0.04 m = 0.008 cum 04.002.03 P/L CC walls string courses, coping, bed blocks, window sills 0.008 ,etc. up to floor five level 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement: [l/2x0.337x(l.20+0.60)] = 0.303 sqm say 0.30 sqm 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 0.30 floating coat of neat cement. Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

: With Sewer bricks IS:

Rate 104.00 25.00 280.00 1.49

3087.47

3794.78

5272.38

173.09 Total: 415.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 419.87 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1317.28 Rs 1315.55

Item Code: 19.4.3.1 P/L SW gully trap with CI grating, masonry chamber and CI cover with frame : 180 x 150 mm size P type : With F.P.S. bricks.

Code

DSR-12

Description Details of cost of one gully trap

Details of Cost for : 1.00 No. Unit Quantity

Rate

Page 964 of 2298

1904 1367 1352 9999

04.001.11

06.001.01

04.002.03

13.009.01

180x150 mm Gully trap ‘P’ type each C.I. grating .180x180 mm each C.l. cover with frame 300x300mm inside each Carriage of materials L.S. Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 0.68x0.68x0.10 m = 0.046 cum Concrete around trap 0.30x0.30x0.675 m = 0.061 cum =0.107 cum Deduct: 0.55/3x[0.09+0.032+(0.09x0.032) 1/2 ] = 0.008 cum 3.14/4x(0.182) x0.70 = 0.018 cum = 0.026 cum Net quantity 0.107 cum (-) 0.026 cum = 0.081 cum say 0.08 cum P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag Brick work with 75 class designation brick in cement mortar 1:4(1 cement: 4 coarse sand) 1.66x0.115x0.675 m = 0.129 cum say 0.13 cum Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1.66x0.115x0.04 m = 0.008 cum P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement: [l/2x0.166x(l.20+0.72)] = 0.159 sqm say 0.16 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

1.00 1.00 1.00 4.50

195.00 30.00 280.00 1.49

0.08

3087.47

0.13

3508.25

0.008

5272.38

0.16

173.09

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 511.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 516.83 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1367.29 Rs 1365.55

Item Code: 19.4.3.2 P/L SW gully trap with CI grating, masonry chamber and CI cover with frame : 180 x 150 mm size P type : With Sewer bricks IS: 4885. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost of one gully trap 1904 180x150 mm Gully trap ‘P’ type each 1.00 195.00 1367 C.I. grating .180x180 mm each 1.00 30.00 1352 C.l. cover with frame 300x300mm inside each 1.00 280.00 9999 Carriage of materials L.S. 4.50 1.49 Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 0.68x0.68x0.10 m = 0.046 cum Concrete around trap 0.30x0.30x0.675 m = 0.061 cum =0.107 cum Deduct:

DSR-12

Page 965 of 2298

04.001.11

06.036.01

04.002.03

13.009.01

0.155/3x[0.09+0.032+(0.09x0.032) 1/2 ] = 0.008 cum 3.14/4x(0.182)^2 x0.70 = 0.018 cum = 0.026 cum Net quantity 0.107 cum (-) 0.026 cum = 0.081 cum say 0.08 cum P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag Brick work with sewer bricks conforming to IS: 4885. in cement mortar 1:4(1 cement: 4 coarse sand) 1.66x0.115x0.675 m = 0.129 cum say 0.13 cum B/W extruded burnt flyash clay sewer bricks in found and plinth CM 1:4 Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1.66x0.115x0.04 m = 0.008 cum P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement: [l/2x0.166x(l.20+0.072)] = 0.159 sqm say 0.16 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

0.08

3087.47

0.13

3794.78

0.008

5272.38

0.16

173.09

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 511.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 516.83 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1404.54 Rs 1402.80

Item Code: 19.5.1 Dismantling of old S.W pipes including breaking of joints and bed concrete : 100 mm diameter. Details of Cost for : 10.00 m Code Description Unit Quantity LABOUR 0114 Beldar Day 0.49 0115 coolie Day 0.36 Add water charges @ 1% on

Rate 247.00 247.00 Total: 209.95

Add C.P & OH @15% on 212.05 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 24.39 Rs 24.40

Item Code: 19.5.2 Dismantling of old S.W pipes including breaking of joints and bed concrete : 150 mm diameter. Details of Cost for : 10.00 m Code Description Unit Quantity LABOUR 0114 Beldar Day 0.49 0115 coolie Day 0.45

DSR-12

Rate

Add water charges @ 1% on

247.00 247.00 Total: 232.18

Add C.P & OH @15% on

234.50

Page 966 of 2298

Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 26.97 Rs 26.95

Item Code: 19.5.3 Dismantling of old S.W pipes including breaking of joints and bed concrete : 200 mm diameter. Details of Cost for : 10.00 m Code Description Unit Quantity LABOUR 0114 Beldar Day 0.49 0115 Coolie Day 0.51 Add water charges @ 1% on

Rate 247.00 247.00 Total: 247.00

Add C.P & OH @15% on 249.47 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 28.69 Rs 28.70

Item Code: 19.5.4 Dismantling of old S.W pipes including breaking of joints and bed concrete : 250 mm diameter. Details of Cost for : 10.00 m Code Description Unit Quantity LABOUR 0114 Beldar Day 0.49 0115 Coolie Day 0.57 Add water charges @ 1% on

Rate 247.00 247.00 Total: 261.82

Add C.P & OH @15% on 264.44 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 30.41 Rs 30.40

Item Code: 19.5.5 Dismantling of old S.W pipes including breaking of joints and bed concrete : 300 mm diameter. Details of Cost for : 10.00 m Code Description Unit Quantity LABOUR 0114 Beldar Day 0.49 0115 Coolie Day 0.63 Add water charges @ 1% on

Rate 247.00 247.00 Total: 276.64

Add C.P & OH @15% on 279.41 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 32.13 Rs 32.15

Item Code: 19.5.6 Dismantling of old S.W pipes including breaking of joints and bed concrete : 350 mm diameter. Details of Cost for : 10.00 m

DSR-12

Page 967 of 2298

Code 0114 0115

Description LABOUR Beldar Coolie

Unit

Quantity

Rate

Day Day

0.60 0.69

247.00 247.00 Total: 318.63

Add water charges @ 1% on

Add C.P & OH @15% on 321.82 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 37.01 Rs 37.00

Item Code: 19.5.7 Dismantling of old S.W pipes including breaking of joints and bed concrete : 400 mm diameter. Details of Cost for : 10.00 m Code Description Unit Quantity LABOUR 0114 Beldar Day 0.66 0115 Coolie Day 0.75 Add water charges @ 1% on

Rate 247.00 247.00 Total: 348.27

Add C.P & OH @15% on 351.75 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 40.45 Rs 40.45

Item Code: 19.5.8 Dismantling of old S.W pipes including breaking of joints and bed concrete : 450 mm diameter. Details of Cost for : 10.00 m Code Description Unit Quantity LABOUR 0114 Beldar Day 0.66 0115 Coolie Day 0.81 Add water charges @ 1% on

Rate 247.00 247.00 Total: 363.09

Add C.P & OH @15% on 366.72 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 42.17 Rs 42.15

Item Code: 19.6.1 P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 100 mm dia. R.C.C. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS: 1700 100mm dia pipe (in 2.00m length) metre 10.00 135.00 1714 RCC collars for 100mm dia pipes each 5.00 20.00 2275 Carriage of RCC pipes 100mm dia 100 m 10.00 191.48 0367 Cement tonne 0.005 5000.00 Cement of 5 joints = 5x0.00065 = 0.00325 cum = 0.0048 t say 0.005 tonne

DSR-12

Page 968 of 2298

2209 0983 2261 0123 0124 0114 0101

Carriage of cement Fine sand Carraige of Carraige of Fine sand LABOUR: Mason I class Mason II class Beldar Bhisthi

tonne cum cum Day Day Day Day

0.005 0.006 0.006

77.87 640.00 87.60

0.32 0.32 0.63 0.16

301.00 273.00 247.00 260.00 Total: 1879.80

Add water charges @ 1% on

Add C.P & OH @15% on 1898.60 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 218.34 Rs 218.35

Item Code: 19.6.2 P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 150 mm dia. R.C.C. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS: 1701 150mm dia RCC pipe NP2 class (in 2m length) metre 10.00 154.00 1715 Collars for 150mm dia NP2 class RCC pipe each 5.00 25.00 2281 Carriage of RCC pipes 150mm dia 100 m 10.00 319.12 0367 Cement tonne 0.006 5000.00 Cement of 5 joints = 5x0.00065 = 0.00325 cum = 0.0048 t say 0.005 tonne 2209 0983 2261 0123 0124 0114 0101

Carriage of cement Fine sand Carraige of Carraige of Fine sand LABOUR: Mason I class Mason II class Beldar Bhisthi

tonne cum cum Day Day Day Day

0.006 0.008 0.008

77.87 640.00 87.60

0.39 0.39 0.78 0.16

301.00 273.00 247.00 260.00 Total: 2191.32

Add water charges @ 1% on

Add C.P & OH @15% on 2213.23 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 254.52 Rs 254.50

Item Code: 19.6.3 P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 250 mm dia. R.C.C. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate 1702 R.C.C. pipes NP2 class 250 mm d metre 10.00 188.00 1716 R.C.C. collars NP2 class 250 m each 5.00 40.00 2287 Carraige of Carraige of R.C.C.pipes 250 mm dia 100 m 10.00 737.68 0367 Cement tonne 0.009 5000.00 Cement of 5 joints = 5x0.00065 = 0.00325

DSR-12

Page 969 of 2298

cum = 0.0048 t say 0.005 tonne 2209 0983 2261 0123 0124 0114 0101

Carriage of cement Fine sand Carraige of Carraige of Fine sand Mason I class Mason II class Beldar Bhisthi

tonne cum cum Day Day Day Day

0.009 0.012 0.012 0.54 0.54 1.50 0.23

Add water charges @ 1% on

77.87 640.00 87.60 301.00 273.00 247.00 260.00 Total: 2948.46

Add C.P & OH @15% on 2977.94 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 342.46 Rs 342.45

Item Code: 19.6.4 P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 300 mm dia. R.C.C. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS: 1703 RCC pipe - NP2 class - with Collar - 300mm dia metre 10.00 261.00 1717 Collars for RCC pipes - NP2 Class - 300mm dia each 4.00 49.00 2290 Carriage for RCC pipes 300mm dia 100 m 10.00 911.78 0367 Cement tonne 0.011 5000.00 Cement of 5 joints = 5x0.00065 = 0.00325 cum = 0.0048 t say 0.005 tonne 2209 0983 2261 0123 0124 0114 0101

Carriage of cement Fine sand Carraige of Carraige of Fine sand LABOUR: Mason I class Mason II class Beldar Bhisthi

tonne cum cum Day Day Day Day

0.011 0.015 0.015

77.87 640.00 87.60

0.59 0.59 1.16 0.20

301.00 273.00 247.00 260.00 Total: 3641.13

Add water charges @ 1% on

Add C.P & OH @15% on 3677.54 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 422.92 Rs 422.90

Item Code: 19.6.5 P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 450 mm dia. R.C.C. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS: 1704 450mm dia NP2 class RCC pipe (2.5m long) metre 10.00 380.00 1718 Collars for 450mm dia RCC pipe each 4.00 75.00 2299 Carriage for RCC pipes 100 m 10.00 2127.50 0367 Cement tonne 0.024 5000.00

DSR-12

Page 970 of 2298

Cement of 5 joints = 5x0.00065 = 0.00325 cum = 0.0048 t say 0.005 tonne 2209 0983 2261 0123 0124 0114 0101

Carriage of cement Fine sand Carraige of Carraige of Fine sand LABOUR: Mason I class Mason II class Beldar Bhisthi

tonne cum cum Day Day Day Day

0.024 0.033 0.033

77.87 640.00 87.60

0.75 0.75 1.50 0.33

301.00 273.00 247.00 260.00 Total: 5345.43

Add water charges @ 1% on

Add C.P & OH @15% on 5398.88 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 620.87 Rs 620.85

Item Code: 19.6.6 P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 500 mm dia. R.C.C. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 1705 500 mm dia pipe (in 2.5 m. length = 4) metre 10.00 454.00 1719 Collars 4 Nos. each 4.00 89.00 2299 carriage of pipe 100 m 10.00 2127.50 0367 Cement of 4 joints = 4x0.00185 = 0.0074 cum tonne 0.026 5000.00 = 0.011 t 2209 Carriage of cement tonne 0.026 77.87 0983 Fine sand for 4 joint = 0.0037x4 = 0.0148 cum cum 0.036 640.00 = 0.015 cum 2261 Carriage of sand cum 0.036 87.60 LABOUR 0123 Mason 1 st class Day 0.81 301.00 0124 Mason 2nd class Day 0.81 273.00 0114 Beldar Day 1.62 247.00 0101 Bhishti Day 0.33 260.00 Total: Add water charges @ 1% on 6217.84 Add C.P & OH @15% on 6280.02 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 722.20 Rs 722.20

Item Code: 19.6.7 P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 100 mm dia. R.C.C. pipe Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIALS 1706 600mm dia pipe (in 2.5 m. length = 4 nos.) metre 10.00 732.00 1720 Collars 4 Nos each 4.00 109.00 2303 carriage of pipes 100 m 10.00 3191.25

DSR-12

Page 971 of 2298

0367 2209 0983 2261 0123 0124 0114 0101

Cement of 4 joints = 4x0.0054 = 0.0216 cum = 0.032 t Carriage of cement Fine sand for 4 joint = 0.0108x4 = 0.043 cum Carriage of sand LABOUR Mason 1 st class Mason 2nd class Beldar Bhishti

tonne tonne cum cum Day Day Day Day

0.032 0.032 0.043 0.043

5000.00 77.87 640.00 87.60

0.92 0.92 1.83 0.33

301.00 273.00 247.00 260.00 Total: 9334.80

Add water charges @ 1% on

Add C.P & OH @15% on 9428.15 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1084.24 Rs 1084.25

Item Code: 19.6.8 P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 700 mm dia RCC pipe . Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS 1707 700 mm dia pipe (in 2.5 m. length = 4 nos.) metre 10.00 1721 Collars 4 Nos each 4.00 2303 carriage of pipes 100 m 10.00 0367 Cement of 4 joints = 4x0.0062 = 0.0248 cum tonne 0.037 = 0.037 t 2209 Carriage of cement tonne 0.037 0983 Fine sand for 4 joint = 0.0124x4 = 0.0496 cum cum 0.05 = 0.05 cum 2261 Carriage of sand cum 0.05 LABOUR 0123 Mason 1 st class Day 1.03 0124 Mason 2nd class Day 1.03 0114 Beldar Day 2.06 0101 Bhishti Day 0.42 Add water charges @ 1% on

Rate 995.00 121.00 3191.25 5000.00 77.87 640.00 87.60 301.00 273.00 247.00 260.00 Total: 12186.63

Add C.P & OH @15% on 12308.50 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1415.48 Rs 1415.50

Item Code: 19.6.9 P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 800 mm dia. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS 1709 800 mm dia pipe (in 2.5 m. length = 4 nos.) metre 10.00 1723 Collars 4 Nos. each 4.00 2303 carriage of pipes 100 m 10.00 0367 Cement of 4 joints = 4x0.0072 = 0.0288 cum tonne 0.042 = 0.042 t 2209 Carriage of cement tonne 0.042 0983 Fine sand for 4 joint = 0.0143x4 = 0.0572 cum cum 0.057

DSR-12

Rate 960.00 172.00 3191.25 5000.00 77.87 640.00

Page 972 of 2298

2261 0123 0124 0114 0101

= 0.057 cum Carriage of sand LABOUR Mason 1st class Mason 2nd class Beldar Bhishti

cum

0.057

87.60

Day Day Day Day

1.14 1.14 2.28 0.42

301.00 273.00 247.00 260.00 Total: 12188.59

Add water charges @ 1% on

Add C.P & OH @15% on 12310.48 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1415.71 Rs 1415.70

Item Code: 19.6.10 P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 900 mm dia. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS 1710 900 mm dia pipe (in 2.5 m. length = 4 nos.) metre 10.00 1724 Collars 4 Nos. each 4.00 2331 Carriage of pipes 100 m 10.00 0367 Cement of 4 joints = 4x0.0082 = 0.0328 cum tonne 0.049 = 0.0488 t Say 0.049 t 2209 Carriage of cement tonne 0.049 0983 Fine sand for 4 joint = 0.0164x4 = 0.066 cum cum 0.066 2261 Carriage of sand cum 0.066 LABOUR 0123 Mason 1 st class Day 1.25 0124 Mason 2nd class Day 1.25 0114 Beldar Day 3.00 0101 Bhishti Day 0.50 Add water charges @ 1% on

Rate 1125.00 210.00 4786.87 5000.00 77.87 640.00 87.60 301.00 273.00 247.00 260.00 Total: 14454.03

Add C.P & OH @15% on 14598.57 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1678.84 Rs 1678.85

Item Code: 19.6.11 P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 1000 mm dia. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS 1711 1000 mm dia pipe (in 2.5 m. length = 4 nos.) metre 10.00 1725 Collars 4 Nos. each 4.00 2332 Carriage of pipes 100 m 10.00 0367 Cement of 4 joints = 4x0.0092 = 0.0368 cum tonne 0.055 = 0.055 t 2209 Carriage of cement tonne 0.055 0983 Fine sand for 4 joint = 0.0185x4 = 0.074 cum cum 0.074 2261 Carriage of sand cum 0.074 LABOUR 0123 Mason 1 st class Day 1.36

DSR-12

Rate 1420.00 256.00 6382.50 5000.00 77.87 640.00 87.60 301.00

Page 973 of 2298

0124 0114 0101

Mason 2nd class Beldar Bhishti

Day Day Day

1.36 4.33 0.50

Add water charges @ 1% on

273.00 247.00 260.00 Total: 18175.52

Add C.P & OH @15% on 18357.28 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2111.09 Rs 2111.10

Item Code: 19.6.12 P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 1100 mm dia. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS 1712 1100 mm dia pipe (in 2.5m.length = 4 Nos.) metre 10.00 1726 Collars 4 Nos. each 4.00 2333 carnage of pipes 100 m 10.00 0367 Cement of 4 joints = 4x0.0103 =0.0412 cum tonne 0.061 = 0.061 t 2209 Carriage of cement tonne 0.061 0983 Fine sand for 4 joint = 0.0206x4 = 0.0824 cum cum 0.082 = 0.082 cum 2261 Carriage of sand cum 0.082 LABOUR 0123 Mason 1st class Day 1.47 0124 Mason 2nd class Day 1.47 0114 Beldar Day 6.30 0101 Bhishti Day 0.60 Add water charges @ 1% on

Rate 1730.00 283.00 6382.50 5000.00 77.87 640.00 87.60 301.00 273.00 247.00 260.00 Total: 21995.54

Add C.P & OH @15% on 22215.50 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2554.78 Rs 2554.80

Item Code: 19.6.13 P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 1200 mm dia. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIALS 1713 1200 mm dia pipe (in 2.5 m. length = 4 nos.) metre 10.00 1727 Collars 4 Nos each 4.00 2334 Carriage of pipes 100 m 10.00 0367 Cement of 4 joints = 4x0.0114 = 0.0456 cum tonne 0.068 = 0.068 t 2209 Carriage of cement tonne 0.068 0983 Fine sand for 4 joint = 0.0229x4 = 0.0916 cum cum 0.092 = 0.092 cum 2261 Carriage of sand cum 0.092 LABOUR 0123 Mason 1 st class Day 1.59 0124 Mason 2nd class Day 1.59 0114 Beldar Day 8.67

DSR-12

Rate 1760.00 330.00 6382.80 5000.00 77.87 640.00 87.60 301.00 273.00 247.00

Page 974 of 2298

0101

Bhishti

Day

0.67

Add water charges @ 1% on

260.00 Total: 23198.87

Add C.P & OH @15% on 23430.86 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2694.55 Rs 2694.55

Item Code: 19.7.1.1 C/o brick masonry manhole in CM1:4 Inside size 90x80cm and 45cm deep including C.I. cover and frame(38kg) : With non-modular bricks of 7.5 class desgn. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 manhole MATERIALS Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 1.51x1.41x0.20=0.426 cum Say 0.43 cun. 04.001.08 P/L CC excluding centering - All work up to plinth level: 1:4:8 0.43 3593.30 Coarse sand, 40mmstone a Brick work with bricks of class designation 75 in foundation & plinth in cement mortar 1:4 (1 cement: 4 coarse sand) 4.32x0.23x0.35 m = 0.348 cum Less for pipe 2x3.14/4x(0.15m)^2 x0.23m = (-) 0.008 cum = 0.340 cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.34 3508.25 and plinth in: CM 1:4 (1 cem Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for benching

04.001.03

13.009.01

05.003

0115

05.022.01

DSR-12

2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum Less for pipe 1x0.90x3.14/4x(0.15 m)^2 = (-) 0.02 cum = 0.16 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 3.40mx0.05m = 0.17 sqm 2x 1/2x0.80x0.10m = 0.08 sqm = 0.25 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For slab: 1.36x1.26x0.15m = 0.257 cum Less for cover 0.61x0.455x0.15m = (-) 0.042cum = 0.215 cum Say 0.22 cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Deduct labour for not lifting material upto floor five level Coolie Day Mild steel reinforcement for slab : 0.22 cum @ 48.06 kg/cum = 10.57 kg Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi

0.16

4514.03

0.25

173.09

0.22

5494.55

-0.41

247.00

10.57

56.77

Page 975 of 2298

05.009.03

0123 0124 1354 9999 9999 9999

Form work = 0.90x0.80= 0.72 sqm Less cover = 0.61x0.45m = (-) 0.278 sqm =0.42 sqm. say 0.44 sqm. Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi LABOUR Extra labour for making channel: Mason 1st class Day Mason 2nd class Day C.I. Cover with frame 455x610 mm (inside) each Carriage of C.I. cover & frame L.S. Painting of C.I. cover & frame with coal tar L.S. Sundries L.S.

0.44

311.22

0.06 0.06 1.00 6.76 6.76 13.52

301.00 273.00 1415.00 1.49 1.49 1.49 Total: 1388.45

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on 1402.33 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 7061.92 Rs 7132.00

Item Code: 19.7.1.2 Constructing brick masonry manhole in cement mortar 1:4, RCC top slab and making channel CC 1:2:4 :- inside size 90x80 cm 45 cm deep i/c CI cover with frame (LD). With Sewer bricks IS: 4885.

Code

04.001.08

06.036.01

04.001.03

13.009.01

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for 1 manhole MATERIALS Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 1.51x1.41x0.20m=0.426 cum Say 0.43 cun. P/L CC excluding centering - All work up to plinth level: 1:4:8 0.43 Coarse sand, 40mmstone a Brick work with sewer bricks conforming to IS: 4885. in foundation & plinth in cement mortar 1:4 (1 cement: 4 coarse sand) 4.32x0.23x0.35 m = 0.348 cum Less for pipe 2x3.14/4x(0.15m)^2 x0.23m = (-) 0.008 cum = 0.340 cum B/W extruded burnt flyash clay sewer bricks in found and 0.34 plinth CM 1:4 Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for benching 2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum Less for pipe 1x0.90x3.14/4x(0.15 m)^2 = (-) 0.02 cum = 0.16 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 3.40mx0.05m = 0.17 sqm 2x 1/2x0.80x0.10m = 0.08 sqm = 0.25 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

Rate

3593.30

3794.78

0.16

4514.03

0.25

173.09

Page 976 of 2298

05.003

0115

05.022.01

05.009.03

0123 0124 1354 9999 9999 9999

Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For slab: 1.36x1.26x0.15m = 0.257 cum Less for cover 0.61x0.455x0.15m = (-) 0.042 cum = 0.215 cum Say 0.22 cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Deduct labour for not lifting material upto floor five level Coolie Mild steel reinforcement for slab : 0.22 cum @ 48.06 kg/cum = 10.57 kg Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi Form work = 0.90x0.80= 0.72 sqm =0.442 sqm say 0.44 sqm Less cover = 0.61x0.455m = (-) 0.278 sqm Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class C.I. Cover with frame 455x610 mm (inside) Carriage of C.I. cover & frame Painting of C.I. cover & frame with coal tar Sundries

Day

Day Day each L.S. L.S. L.S.

0.22

5494.55

-0.41

247.00

10.57

56.77

0.44

311.22

0.06 0.06 1.00 6.76 6.76 13.52

301.00 273.00 1415.00 1.49 1.49 1.49 Total: 1388.45

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on 1402.33 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 7159.34 Rs 7229.45

Item Code: 19.7.2.1 C/o brick masonry manhole in CM1:4 Inside size 120x90cm and 90cm deep including C.I. cover and frame(58kg) : With common burnt FPS (non-modular) bricks of 7.5 class desgn Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 manhole MATERIALS Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 1.81x1.51x0.20m=0.547 cum Say 0.55 cun. 04.001.08 P/L CC excluding centering - All work up to plinth level: 1:4:8 0.55 3593.30 Coarse sand, 40mmstone a Brick work with bricks of class designation 75 in foundation & plinth in cement mortar 1:4 (1 cement: 4 coarse sand) 5.12x0.23x0.80 m = 0.942 cum Less for pipe 2x3.14/4x(0.15m)^2 x0.23m = (-) 0.008 cum = 0.934 cum say 0.93 cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.93 3508.25 and plinth in: CM 1:4 (1 cem Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for benching

DSR-12

Page 977 of 2298

04.001.03

13.009.01

05.003

0115

05.022.01

05.009.03

0123 0124 1356 9999 9999 9999

2x1.20x(0.90x10.30/2) x (0.30+0.20)/2 = 0.270 cum Less for pipe 1.20x3.14/4x(0.15 m)^2 = (-) 0.021 cum = 0.249 cum say 0.25 cum. P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 4.20mx0.50m = 2.10 sqm 2x 1/2x0.90x0.10m = 0.08 sqm Total = 2.19 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For slab: 1.66x1.36x0.15m = 0.339 cum Less for cover 0.7854x(0.50)^2 x0.15m = (-) 0.029 cum = 0.31cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Deduct labour for not lifting material upto floor five level Coolie Mild steel reinforcement for slab : 0.31 cum @ 48.06 kg/cum = 24.83 kg Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi Form work = 1.20x0.90= 1.08 sqm Less cover = 3.14/4x(0.50)^2 =(-) 0.196 sqm = 0.884 sqm Say 0.88 sqm Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class C.I. Cover with frame 500 mm (inside) Carriage of C.I. cover & frame Painting of C.I. cover & frame with coal tar Sundries

Day

Day Day each L.S. L.S. L.S.

0.25

4514.03

2.19

173.09

0.31

5494.55

-0.58

247.00

24.83

56.77

0.88

311.22

0.08 0.08 1.00 6.76 6.76 16.64

301.00 273.00 4435.00 1.49 1.49 1.49 Total: 4382.59

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on 4426.42 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 15223.73 Rs 15322.95

Item Code: 19.7.2.2 Constructing brick masonry manhole in cement mortar 1:4, RCC top slab and making channel CC 1:2:4 :- inside size 120 x 90 x 90 cm i/c CI cover with frame 500 mm dia (MD). With Sewer bricks conforming to IS : 4885.

Code

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for 1 manhole MATERIALS Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 1.81x1.51x0.20m=0.547 cum Say 0.55 cun.

Rate

Page 978 of 2298

04.001.08

06.036.01

04.001.03

13.009.01

05.003

0115

05.022.01

05.009.03

0123 0124 1356 9999 9999 9999

P/L CC excluding centering - All work up to plinth level: 1:4:8 Coarse sand, 40mmstone a Brick work with sewer bricks conforming to IS: 4885. in foundation & plinth in cement mortar 1:4 (1 cement: 4 coarse sand) 5.12x0.23x0.80 m = 0.942 cum Less for pipe 2x3.14/4x(0.15m)2 x0.23m = (-) 0.008 cum = 0.934 cum say 0.93 cum B/W extruded burnt flyash clay sewer bricks in found and plinth CM 1:4 Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for benching 2x1.20x0.90x(0.80/2) x (0.30+0.20)/2 = 0.270 cum Less for pipe 1.20x3.14/4x(0.15 m)^2 = (-) 0.021 cum = 0.249 cum say 0.25 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 4.20mx0.50m = 2.10 sqm 2x 1/2x0.90x0.10m = 0.08 sqm = 2.19 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For slab: 1.66x1.36x0.15m = 0.339 cum Less for cover 0.7854x(0.50)^2 x0.15m = (-) 0.029 cum = 0.31cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Deduct labour for not lifting material upto floor five level Coolie Mild steel reinforcement for slab : 0.31 cum @ 48.06 kg/cum = 24.83 kg Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi Form work = 1.20x0.90= 1.08 sqm Less cover = 3.14/4x(0.50)^2 =(-) 0.196 sqm = 0.884 sqm Say 0.88 sqm Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class C.I. Cover with frame 500 mm (inside) Carriage of C.I. cover & frame Painting of C.I. cover & frame with coal tar Sundries

Day

Day Day each L.S. L.S. L.S.

0.55

3593.30

0.93

3794.78

0.25

4514.03

2.19

173.09

0.31

5494.55

-0.58

247.00

24.83

56.77

0.88

311.22

0.08 0.08 1.00 6.76 6.76 16.64

301.00 273.00 4435.00 1.49 1.49 1.49 Total: 4382.59

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on 4426.42 Cost for 1.00 No. Rate per Each:

DSR-12

Rs 15490.21

Page 979 of 2298

Rate as per DSR-12:

Rs 15589.40

Item Code: 19.7.3.1 Constructing brick masonry manhole in cement mortar 1:4, RCC top slab and making channel CC 1:2:4 :- inside size 120 x 90 x 90 cm i/c CI cover with frame 560 mm dia (MD). with common burnt FPS bricks class 7.5

Code

04.001.08

06.001.01

04.001.03

13.009.01

05.003

0115

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for 1 manhole MATERIALS Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 1.81x1.51x0.20m=0.547 cum Say 0.55 cun. P/L CC excluding centering - All work up to plinth level: 1:4:8 0.55 Coarse sand, 40mmstone a Brick work with bricks of class designation 75 in foundation & plinth in cement mortar 1:4 (1 cement: 4 coarse sand) 5.12x0.23x0.65 m = 0.765 cum 1x0.56x0.23x0.15 m =0.019 cum 1x0.79x0.23x0.15 = 0.027 cum =0.811 Less for pipe 2x3.14/4x(0.15m) x0.23m = (-) 0.008 cum = 0.803 cum say 0.80 cum Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for benching 2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.270 cum Less for pipe 1.20x3.14/4x(0.15 m)^2 = (-) 0.021 cum = 0.249 cum say 0.25 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 4.20mx0.35m = 1.47 sqm 2x0.56x0.15m = 0.17 sqm 2x1/2x0.90x0.10m = 0.09 sqm For fixing cover 0.96x0.96 m =0.922 sqm 2.652 sqm Less cover 3.14/4x(0.56)^2 =(-) 0.246 sqm =2.406 sqm Say 2.41 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For slab: 1.66x1.36x0.15m = 0.339 cum Add extra concreting 1x(0.56+0.79)x0.15x0.15 m=0.03 cum =0.369 cum Less for cover 0.7854x(0.50)^2 x0.15m = (-) 0.037 cum = 0.332 cum Say 0.33 cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Deduct labour for not lifting material upto floor five level Coolie Steel reinforcement for slab @ 80.9 Kg/cum For 0.33 cum = 26.43 kg.

Day

Rate

3593.30

0.80

3508.25

0.25

4514.03

2.41

173.09

0.33

5494.55

-0.62

247.00

Page 980 of 2298

05.022.01

05.009.03

0123 0124 3860 9999 9999 9999

Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi Form work inside area of man-hole 1.20x0.90 =1.08 Less cover = 3.14/4x(0.56)^2 =(-) 0.246 sqm = 0.834 sqm Say 0.88 sqm Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class C.I. Cover with frame 560 dia Carriage of C.I. cover & frame Painting of C.I. cover & frame with coal tar Sundries

Day Day each L.S. L.S. L.S.

26.43

56.77

0.83

311.22

0.08 0.08 1.00 13.52 6.76 20.28

301.00 273.00 8460.00 1.49 1.49 1.49 Total: 8413.21

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on 8497.34 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 19672.46 Rs 19778.80

Item Code: 19.7.3.2 Constructing brick masonry manhole in cement mortar 1:4, RCC top slab and making channel CC 1:2:4 :- inside size 120 x 90 x 90 cm i/c CI cover with frame 560 mm dia (MD). With sewer bricks IS: 4885.

Code

04.001.08

06.036.01

04.001.03

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for 1 manhole MATERIALS Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 1.81x1.51x0.20m=0.547 cum Say 0.55 cun. P/L CC excluding centering - All work up to plinth level: 1:4:8 0.55 Coarse sand, 40mmstone a Sewer Brick conforming to IS: 4885. in foundation & plinth in cement mortar 1:4 (1 cement: 4 coarse sand) 5.12x0.23x0.65 m = 0.765 cum 1x0.56x0.23x0.15 m =0.019 cum 1x0.79x0.23x0.15 = 0.027 cum =0.811 Less for pipe 2x3.14/4x(0.15m) x0.23m = (-) 0.008 cum = 0.803 cum say 0.80 cum B/W extruded burnt flyash clay sewer bricks in found and 0.80 plinth CM 1:4 Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for benching 2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.270 cum Less for pipe 1.20x3.14/4x(0.15 m)^2 = (-) 0.021 cum = 0.249 cum say 0.25 P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 4.20mx0.35m = 1.47 sqm 2x0.56x0.15m = 0.17 sqm 2x1/2x0.90x0.10m = 0.09 sqm

0.25

Rate

3593.30

3794.78

4514.03

Page 981 of 2298

13.009.01

05.003

0115

05.022.01

05.009.03

0123 0124 3860 9999 9999 9999

For fixing cover 0.96x0.96 m =0.922 sqm = 2.652 sqm Less cover 3.14/4x(0.56)^2 =(-) 0.246 sqm =2.406 sqm Say 2.41 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For slab: 1.66x1.36x0.15m = 0.339 cum Add extra concreting 1x(0.56+0.79)x0.15x0.15 m=0.03 cum =0.369 cum Less for cover 0.7854x(0.50)^2 x0.15m = (-) 0.037 cum = 0.332 cum Say 0.33 cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Deduct labour for not lifting material upto floor five level Coolie Steel reinforcement for slab @ 80.9 Kg/cum For 0.33 cum = 26.43 Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi Form work inside area of man-hole 1.20x0.90 =1.08 Less cover = 3.14/4x(0.56)^2 =(-) 0.246 sqm = 0.834 sqm Say 0.88 sqm Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class C.I. Cover with frame 560 dia Carriage of C.I. cover & frame Painting of C.I. cover & frame with coal tar Sundries

Day

Day Day each L.S. L.S. L.S.

2.41

173.09

0.33

5494.55

-0.62

247.00

26.43

56.77

0.83

311.22

0.08 0.08 1.00 13.52 6.76 20.28

301.00 273.00 8460.00 1.49 1.49 1.49 Total: 8413.21

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on 8497.34 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 19901.68 Rs 20008.05

Item Code: 19.8.1.1 Extra for depth for manholes Size 90x80 cm Code

06.001.01

DSR-12

Details of Cost for : 1.00 m Description Unit Quantity Details of cost for one meter MATERIALS Brick work with bricks of class designation 75 in cement mortar 1:4(1 cement : 4 coarse sand) 4.32x0.23x1.00 = 0.994 cum Say 0.99 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.99 and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement

Rate

3508.25

Page 982 of 2298

13.009.01

3.40x1 m = 3.40 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

3.40

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4061.68 Rs 4061.70

Item Code: 19.8.1.2 Extra for depth of manholes Size 90 x 80 cm : With sewer bricks IS : 4885. Code

06.036.01

13.009.01

Details of Cost for : 1.00 m Description Unit Quantity Details of cost for one meter MATERIALS Brick work with modular extruded burnt fire clay sewer bricks in cement mortar 1:4(1 cement : 4 coarse sand) 1x4.32x0.23x1.0 = 0.994 say 0.99 cum B/W extruded burnt flyash clay sewer bricks in found and 0.99 plinth CM 1:4 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 3.40x1 m = 3.40 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 3.40 floating coat of neat cement. Add water charges @ 1% except on [A]+[B] i.e on

Rate

3794.78

173.09 Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4345.34 Rs 4345.40

Item Code: 19.8.2.1 Extra for depth of manholes Size 120 x 90 cm : with F.P.S. bricks . Code

06.001.01

13.009.01

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIALS Brick work with modular extruded burnt fire clay sewer bricks in cement mortar 1:4(1 cement : 4 coarse sand) 5.12x0.23x1.0 = 1.178 say 1.18 cum Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 4.20x1 m = 4.20 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

Rate

1.18

3508.25

4.20

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 1.00 No.

DSR-12

Page 983 of 2298

Rate per Each: Rate as per DSR-12:

Rs 4866.72 Rs 4866.75

Item Code: 19.8.2.2 Extra for depth of manholes Size 120 x 90 cm : With sewer bricks IS : 4885. Code

06.036.01

13.009.01

Details of Cost for : 1.00 m Unit Quantity

Rate

1.18

3794.78

4.20

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total: 0.00

Description MATERIALS Brick work with modular extruded burnt fire clay sewer bricks in cement mortar 1:4 (1 cement : 4 coarse sand) 5.12x0.23x1.00=1.178 say 1.18 cum B/W extruded burnt flyash clay sewer bricks in found and plinth CM 1:4 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 4.20x1 m = 4.20sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5204.82 Rs 5204.90

Item Code: 19.9.1.1 C/o brick masonry circular manhole 1.22 m dia./ 0.56m dia : 0.91 m deep with SFRC cover and frame (HD20 grade) wt not less than 182 Kg With bricks of class designation 75. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 manhole MATERIALS Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) 1.67x1.67x0.225 = 0.63cum. 04.001.06 P/L CC excluding centering - All work up to plinth level: 1:3:6 0.63 3888.20 Coarse sand, 40mmstone a Brick work with bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 coarse sand) Curved on plan 3.14x1.14x0.074x0.23=0.061 3.14x(1.14+0.79)^2 x0.711x0.23 = 0.496 = 0.557 Duduct arch ring and portion of pipe 2x x3.14x0.25mx0.230x0.10 m = 0.018 cum 2x3.14/4x(0.15)^2 x0.230 = 0.008 cum = 0.026 cum Net quantity 0.557-0.026 = 0.531 Say 0.53cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.53 3508.25 and plinth in: CM 1:4 (1 cem Brick work in foundation with 75 class designation brick in cement mortar 1:4 ( 1 cement: 4 coarse sand) 2x 1/2 x3.14x0.25 m x0.230x0.10 m = 0.018 cum Say 0.02 cum 06.009

DSR-12

B/W in plain arches in s/s for span upto 6 m with bricks in CM Cum 1:3

0.02

6384.11

Page 984 of 2298

04.001.03

04.002.03

13.009.01

0123 0124 7135 9999 9999

Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For benching: 3.14/4x(0.91+0.82)^2 x0.20 = 0.118 cum [(2x8.133)/360]x(4/3)x3.14x(0.45)^3 =0.017 cum = 0.135 cum Less pipe : 0.91x3.14/4x(0.15)^2 = (-) 0.016 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum Coarse sand, 20mmstone a Rate as per item no. 4.2.3 of SH : concrete Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For fixing cover : 3.14/4 x d^2 x thickness 0.7854x1.020x1.020x0.15 m =0.123 cum Less cover 3.14/4x(0.28)2 x 0.15 m = (-) 0.037 cum = 0.086 cum Say 0.09 cum P/L CC walls string courses, coping, bed blocks, window sills Cum ,etc. up to floor five level 12 mm cement plaster 1:3(1 cement: 3 coarse sand) finished with floating coat of neat cement 3.14x(0.80+0.56)/2x0.49 = 1.05 sqm 3.14x0.56x0.075 = 0.13 sqm ‘ Benching 3.14x(0.80)^2 /4-0.80x0.15+0.80x 1/2x3.14x0.15 = 0.57 sqm = 1.75 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class S.F.R.C cover 560 mm dia with fram (heavy duty) Carriage Sundries

Day Day each L.S. L.S.

0.12

4514.03

0.09

5272.38

1.75

173.09

0.06 0.06 1.00 6.89 16.90

301.00 273.00 1030.00 1.49 1.49 Total: 1099.89

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 1110.89 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 7033.24 Rs 7007.40

Item Code: 19.9.1.2 Constructing brick masonry circular manhole 1.22 m dia. at bottom and 0.56 m dia at top : 0.91 m deep with SFRC cover and frame (HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With sewer bricks IS: 4885.

Code

04.001.06

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for 1 manhole MATERIALS Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) 1.67x1.67x0.225 = 0.63cum. P/L CC excluding centering - All work up to plinth level: 1:3:6 0.63 Coarse sand, 40mmstone a Brick work with moduler extruded burnt fire clay sewer bricks in cement mortar 1:4(1 cement: 4 coarse sand)

Rate

3888.20

Page 985 of 2298

06.036.01

06.037

04.001.03

04.002.03

13.009.01

0123 0124 7135 9999 9999

Curved on plan 3.14x1.14x0.074x0.23 =0.061 3.14x(1.14+0.79)/2x0.711x0.23 = 0.496 = 0.557 Duduct arch ring and portion of pipe 2x x3.14x0.25mx0.230x0.10 m = 0.018 cum 2x3.14/4x(0.15) x0.230 = 0.008 cum = 0.026 cum Net quantity 0.557-0.026 = 0.531 Say 0.53 B/W extruded burnt flyash clay sewer bricks in found and plinth CM 1:4 Brick work moduler extruded burnt fire clay sewer bricks in arches brick in cement mortar 1:3 (1 cement: 3 coarse sand) 2x x3.14x0.25m x0.230x0.10 m = 0.018 cum Say 0.02 cum B/W with modular extruded burnt fly ash clay sewer in arches in found and plinth in CM 1:3 Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For benching: 3.14/4x(0.91+0.82)^2 x0.20 = 0.118 cum [(2x8.133)/360]x(4/3)x3.14x(0.45)^3 =0.017 cum = 0.135 cum Less pipe : 0.91x3.14/4x(0.15)^2 = (-) 0.016 cum = 0.119 cum Say 0.12 cum Rate as per item no. 4.1.3 of SH : concrete work P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a For fixing cover : 3.14/4 x d^2 x thickness 0.7854x1.020x1.020x0.15 m =0.123 cum Less cover 3.14/4x(0.28)^2 x 0.15 m = (-) 0.037 cum = 0.086 cum Say 0.09 cum P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level 12 mm cement plaster 1:3(1 cement: 3 coarse sand) finished with floating coat of neat cement 3.14x(0.80+0.56)/2x0.49 = 1.05 sqm 3.14x0.56x0.075 = 0.13 sqm Benching 3.14x(0.80)^2 /4-0.80x0.15+0.80x1/2x3.14x0.15 = 0.57 sqm = 1.75 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class S.F.R.C cover 560 mm dia with fram (heavy duty) Carriage Sundries

Day Day each L.S. L.S.

0.53

3794.78

0.02

6221.63

0.12

4514.03

0.09

5272.38

1.75

173.09

0.06 0.06 1.00 6.89 16.90

301.00 273.00 1030.00 1.49 1.49 Total: 1099.89

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 1110.89 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 7181.85 Rs 7162.50

Page 986 of 2298

Item Code: 19.10.1 Extra depth for circuler type manhole 0.91 m internal dia. with bricks of class designation 75. Details of Cost for : 0.76 m Code Description Unit Quantity Details of Cost for 0.76m depth. Bricks work in foundation with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation Cum 0.63 and plinth in: CM 1:4 (1 cem cement concrete 1:2:4( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.01 Coarse sand, 20mmstone a 12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with neat cement. 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 2.33 floating coat of neat cement. Add water charges @ 1% except on [A]+[B]+[C] i.e on

Rate

3508.25

4514.03

173.09 Total: 0.00

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 0.00 Cost for 0.76 m Rate per One Metre: Rate as per DSR-12:

Rs 3498.21 Rs 3498.25

Item Code: 19.10.2 Extra depth for circuler type manhole 0.91 m internal dia. With sewer brick IS : 4885. Details of Cost for : 0.76 m Code Description Unit Quantity Details of Cost for 0.76m extra depth. Brick work with modular exturded burnt fire clay bricks in cement montar 1:4 (1 cement : 4 coarse sand) 06.036.01 B/W extruded burnt flyash clay sewer bricks in found and 0.63 plinth CM 1:4 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.01 Coarse sand, 20mmstone a 12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement. 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 2.33 floating coat of neat cement. Add water charges @ 1% except on [A]+[B]+[C] i.e on

Rate

3794.78

4514.03

173.09 Total: 0.00

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 0.00 Cost for 0.76 m Rate per One Metre: Rate as per DSR-12:

Rs 3735.72 Rs 3735.75

Item Code: 19.11.1.1 Constructing brick masonry circular manhole 1.22 m dia. at bottom and 0.56 m dia at top : 1.68 m deep with SFRC cover and frame (HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With bricks of class designation 75. Details of Cost for : 1.00 No.

DSR-12

Page 987 of 2298

Code

04.001.06

06.001.01

06.009

04.001.03

04.002.03

13.009.01

0123 0124 7135 9999 9999

DSR-12

Description Unit Details of cost for 1 manhole MATERIALS Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) 1.98x1.98x0.30 = 1.178 say 1.18 cum. P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 40mmstone a Brick work with bricks of class designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) Curved on plan 3.14x1.45x0.24x0.23 = 0.251 3.14x(1.45+0.79)/2x 1.32x0.23= 1.069 = 1.320 Duduct arch ring and portion of pipe 2x x3.14x0.25mx0.230x0.10 m = 0.018 cum 2x3.14/4x(0.15)^2 x0.230 = 0.008 cum = 0.026 cum Net quantity 1.320-0.026 = 1.294 Say 1.29 cum Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem Brick work in arches with 75 class designation brick in cement mortar 1:3(1 cement: 3 coarse sand) 2x x3.14x0.25 m x0.230x0.10 m = 0.018cum Say 0.02 cum B/W in plain arches in s/s for span upto 6 m with bricks in CM 1:3 Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For benching: 3.14/4x(1.22)2x0.20 = 0.234 cum [(2x8.133)/360]x(4/3)x3.14x(0.61) =0.043 cum = 0.277 cum Less pipe : 1.22x3.14/4x(0.15) (-) = 0.0216 cum = 0.2554 cum Say 0.26 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For fixing cover : 3.14/4 x d x thickness 0.7854x1.020x1.020x0.15 m =0.123 cum Less cover 3.14/4x(0.28) x 0.15 m : (-) = 0.037 cum = 0.086 cum Say 0.09 cum P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 3.14x(1.136+0.56)/2x1.216 = 3.241 sqm 3.14x0.56x0.075 = 0.13 sqm 3.14x(1.136) /4-1.136x1/2x3.14x0.15= 1.112 sqm = 4.483 sqm Say 4.48 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class S.F.R.C manhole cover and 560 mm dia Carriage Sundries

Day Day each L.S. L.S.

Quantity

Rate

1.18

3888.20

1.29

3508.25

0.02

6384.11

0.26

4514.03

0.09

5272.38

4.48

173.09

0.10 0.10 1.00 6.89 16.90

301.00 273.00 1030.00 1.49 1.49

Page 988 of 2298

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Total: 1122.85

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 1134.08 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 12969.19 Rs 12943.40

Item Code: 19.11.1.2 Constructing brick masonry circular manhole 1.22 m dia. at bottom and 0.56 m dia at top : 1.68 m deep with SFRC cover and frame (HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With sewer bricks IS: 4885.

Code

04.001.06

06.036.01

06.037

04.001.03

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for 1 manhole MATERIALS Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) 1.98x1.98x0.30 = 1.178 say 1.18 cum. P/L CC excluding centering - All work up to plinth level: 1:3:6 1.18 Coarse sand, 40mmstone a Brick work modular exturded burnt fire ash clay in cement mortar 1:4(1 cement: 4 coarse sand) Curved on plan 3.14x1.45x0.24x0.23 = 0.251 3.14x(1.45+0.79)/2x1.32x0.23 = 1.069 = 1.320 Duduct arch ring and portion of pipe 2x x3.14x0.25mx0.230x0.10 m = 0.018 cum 2x3.14/4x(0.15)^2 x0.230 = 0.008 cum = 0.026 cum Net quantity 1.320-0.026 = 1.294 Say 1.29 cum B/W extruded burnt flyash clay sewer bricks in found and 1.29 plinth CM 1:4 Brick work with modular exturded burnt ash clay brick in arches cement mortar 1:3(1 cement: 3 coarse sand) 2x1/2x3.14x0.25 m x0.230x0.10 m = 0.018 cum Say 0.02 cum B/W with modular extruded burnt fly ash clay sewer in arches in found and plinth in CM 1:3 Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For benching: 3.14/4x(1.22)^2 x0.20 = 0.234 cum [(2x8.133)/360]x(4/3)x3.14x(0.61)^3 =0.043 cum = 0.277 cum Less pipe : 1.22x3.14/4x(0.15)^2 (-) = 0.0216 cum = 0.2554 cum Say 0.26 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For fixing cover : 3.14/4xd^2 x thickness 0.7854x1.020x1.020x0.15 m =0.123 cum Less cover 3.14/4x(0.28)^2 x 0.15 m : (-) = 0.037 cum = 0.086 cum Say 0.09 cum

Rate

3888.20

3794.78

0.02

6221.63

0.26

4514.03

Page 989 of 2298

04.002.03

13.009.01

0123 0124 7135 9999 9999

P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 3.14x(1.136+0.56)/2x1.216 = 3.241 sqm 3.14x0.56x0.075 = 0.13 sqm 3.14x(l.136)^2 /4-1.136x1/2x3.14x0.15 = 1.112 sqm = 4.483 sqm Say 4.48 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class S.F.R.C manhole cover and frame 560 mm dia Carriage Sundries

Day Day each L.S. L.S.

0.09

5272.38

4.48

173.09

0.10 0.10 1.00 6.89 16.90

301.00 273.00 1030.00 1.49 1.49 Total: 1122.85

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 1134.08 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 13335.57 Rs 13316.30

Item Code: 19.12.1 Extra depth for circuler type manhole 1.22 m internal dia. Code

06.001.01

13.009.01

Details of Cost for : 0.61 m Description Unit Quantity Details of Cost for 0.61m extra depth. Brick work with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) Brick work with F.P.S. bricks of class desgn 75 in foundation Cum 0.66 and plinth in: CM 1:4 (1 cem 12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement. Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 2.56 floating coat of neat cement. Add water charges @ 1% except on [A]+[B] i.e on

Rate

3508.25

173.09 Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 0.61 m Rate per One Metre: Rate as per DSR-12:

Rs 4522.23 Rs 4522.30

Item Code: 19.12.2 Extra depth for circuler type manhole 1.22 m internal dia. Code

06.036.01

DSR-12

Details of Cost for : 0.61 m Description Unit Quantity Details of Cost for 0.61m extra depth. Brick work with modular exturded burnt fire clay bricks in cement montar 1:4 (1 cement : 4 coarse sand) B/W extruded burnt flyash clay sewer bricks in found and 0.66 plinth CM 1:4

Rate

3794.78

Page 990 of 2298

13.009.01

12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement. Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

2.56

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 0.61 m Rate per One Metre: Rate as per DSR-12:

Rs 4832.23 Rs 4832.30

Item Code: 19.13.1.1 Constructing brick masonry circular manhole 1.52 Mtr internal dia at bottom and 0.56 m dia. at top : 2.30 m deep with SFRC Cover and fram e(HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With bricks of class designation 75.

Code

04.001.06

06.001.01

06.009

04.001.03

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for 1 manhole MATERIALS Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) 2.74x2.74x0.30=2.25cum P/L CC excluding centering - All work up to plinth level: 1:3:6 - Cum 2.25 Coarse sand, 40mmstone a Brick work with bricks of class designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) Curved on plan 3.14x1.98x0.25x0.46 = 0.716 cum 3.14x(1.98+0.905)/2x0.345xl.93 = 3.019 cum = 3.735 cum Duduct arch ring and portion of pipe 2x½x3.14x0.25mx0.46x0.10 m = 0.036 cum 2x3.14/4x(0.15)^2 x0.460 = 0.016 cum = 0.052 cum Net quantity 3.735-0.052 = 3.683 cum Say 3.68 cum Brick work with F.P.S. bricks of class desgn 75 in foundation 3.68 and plinth in: CM 1:4 (1 cem Brick work in arches with 75 class designation brick in cement mortar 1:3(1 cement: 3 fine sand) 2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036 cum Say 0.04 cum B/W in plain arches in s/s for span upto 6 m with bricks in CM 0.04 1:3 Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For benching: 3.14/4x(l.52)2x0.20 = 0.363 cum [(2x8.133)/360]x(4/3)x3.14x(0.76)^3 =0.083 cum = 0.446 cum Less pipe : 1.52x3.14/4x(0.15)^2 (-) = 0.027 cum = 0.419 cum Say 0.42 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 0.42 Coarse sand, 20mmstone a Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For fixing cover : 3.14/4 x d^2 x thickness 0.7854x1.020x1.020x0.15 m =0.123 cum

Rate

3888.20

3508.25

6384.11

4514.03

Page 991 of 2298

04.002.03

13.009.01

0123 0124 7135 9999 9999

Less cover 3.14/4x(0.28)^2 x 0.15 m : (-) = 0.037 cum = 0.086 cum Say 0.09 cum P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level 12 mm cement plaster 1:3(1 cement: 3 coarse sand) finished with floating coat of neat cement 3.14x(1.454+0.56)/2xl.799 = 5.694 sqm 3.14x0.56x0.075 = 0.13 sqm Benching 3.14x( 1.454)^2 4-1.454x0.15+1.454x1/2x3.14x 0.15 =1.786 sqm = 7.61 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. LABOUR Extra labour for making channel: Mason 1st class Mason 2nd class S.F.R.C cover 560 mm dia HD-20 Carriage Sundries

Day Day each L.S. L.S.

0.09

5272.38

7.61

173.09

0.10 0.10 1.00 6.89 16.90

301.00 273.00 1030.00 1.49 1.49 Total: 1122.85

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 1134.08 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 26905.97 Rs 26873.70

Item Code: 19.13.1.2 Constructing brick masonry circular manhole 1.52 Mtr internal dia at bottom and 0.56 m dia. at top : 2.30 m deep with SFRC Cover and fram e(HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With sewer bricks IS: 4885.

Code

04.001.06

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for 1 manhole MATERIALS Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) 2.74x2.74x0.30=2.25cum P/L CC excluding centering - All work up to plinth level: 1:3:6 - Cum 2.25 Coarse sand, 40mmstone a Brick work with modular exturded burnt fly ash clay bricks in arches in cement mortar 1:4 (1 cement: 4 coarse sand)

Rate

3888.20

Curved on plan 3.14x1.98x0.25x0.46 = 0.716 cum 3.14x(1.98+0.905)/2x0.345xl.93 = 3.019 cum = 3.735 cum Duduct arch ring and portion of pipe

06.036.01

DSR-12

2x / x3.14x0.25mx0.46x0.10 m = 0.036 cum 2x3.14/4x(0.15) x0.460 = 0.016 cum = 0.052 cum Net quantity 3.735-0.052 = 3.683 cum Say 3.68 cum B/W extruded burnt flyash clay sewer bricks in found and plinth CM 1:4

3.68

3794.78

Page 992 of 2298

06.037

04.001.03

04.002.03

13.009.01

0123 0124 7135 9999 9999

Brick work with modular exturded burnt fly ash clay bricks in arches in cement mortar 1:3 (1 cement: 3 sand) 2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036 cum Say 0.04 cum B/W with modular extruded burnt fly ash clay sewer in arches in found and plinth in CM 1:3 Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For benching: 3.14/4x(1.52) x0.20 = 0.363 cum [(2x8.133)/360]x(4/3)x3.14x(0.76) =0.083 cum = 0.446 cum Less pipe : 1.52x3.14/4x(0.15)K-) = 0.027 cum = 0.419 cum Say 0.42 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For fixing cover : 3.14/4 x d thickness 0.7854x1.020x1.020x0.15 m =0.123 cum Less cover 3.14/4x(0.28) x 0.15 m : (-) = 0.037 cum = 0.086 cum Say 0.09 cum P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 3.14x(1.454+0.56)/2xl.799 = 5.694 sqm 3.14x0.56x0.075 = 0.13 sqm Benching 3.14x(1.454)^2 4-l. 454x0.15+1.454x1/2x3.14x 0.15 =1.786 sqm = 7.61 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. LABOUR Extra labour for making channel : Mason 1st class Mason 2nd class S.F.R.C cover 560 mm dia HD-20 Carriage Sundries

Day Day each L.S. L.S.

0.04

6221.63

0.42

4514.03

0.09

5272.38

7.61

173.09

0.10 0.10 1.00 6.89 16.90

301.00 273.00 1030.00 1.49 1.49 Total: 1122.85

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 1134.08 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 27953.91 Rs 27934.70

Item Code: 19.14.1 Extra depth for circuler type manhole 1.52 M internal dia. beyond 2.30 metre: With bricks of class designation 75.

Code

DSR-12

Details of Cost for : 1.88 m Description Unit Quantity Details of cost for 1.88 m extra depth Brick work with bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 coarse sand)

Rate

Page 993 of 2298

06.001.01

13.009.01

Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

5.26

3508.25

8.99

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 1.88 m Rate per One Metre: Rate as per DSR-12:

Rs 10643.34 Rs 10643.40

Item Code: 19.14.2 Extra depth for circuler type manhole 1.52 M internal dia. beyond 2.30 metre: With sewer bricks IS: 4885. Details of Cost for : 1.88 m Code Description Unit Quantity Details of cost for 1.88 m extra depth Brick work with modular exturded burnt fly ash bricks in cement mortar 1:4 (1 cement: 4 coarse sand) 06.036.01 B/W extruded burnt flyash clay sewer bricks in found and 5.26 plinth CM 1:4 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 8.99 floating coat of neat cement. Add water charges @ 1% except on [A]+[B] i.e on

Rate

3794.78

173.09 Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 1.88 m Rate per One Metre: Rate as per DSR-12:

Rs 11445.01 Rs 11445.10

Item Code: 19.15.1 Providing MS foot rests in manholes with 20 x 20 mm square bar. Code

1006 9999 0103 0114

04.002.05

0123 0124 0114

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one M.S foot rests MATERIALS M.S. 20 mm square bar 0.75 m @ 3.137 Kg/m quint 0.024 Carriage painting and other sundries L.S. 1.82 LABOUR FOR FABRICATION Black smith (2 nd class) Day 0.10 Beldar Day 0.10 Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.20x0.20x0.10 m = 0.004 cum P/L CC walls, columns, string courses, coping, bed blocks, 0.004 window sills etc. up to floor f LABOUR FOR FIXING M.S. FOOT RESTS Mason 1st class Day 0.02 Mason 2nd class Day 0.02 Beldar Day 0.05

Rate

4250.00 1.49 273.00 247.00

4782.36

301.00 273.00 247.00 Total:

Page 994 of 2298

Add water charges @ 1% except on [A] i.e on

180.54

Add C.P & OH @15% except on [A] i.e on 182.35 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 228.83 Rs 227.95

Item Code: 19.15.2 Providing MS foot rests in manholes With 20 mm dia. round bar. Code

1003 9999 0103 0114

04.002.05

0123 0124 0114

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one M.S foot rests MATERIALS M.S. round brass20 mm dia 0.75 m @ 2.47kg quint 0.018 1 m = 0.018 Qq. Carriage L.S. 1.82 LABOUR FOR FABRICATION Black smith (2 nd class) Day 0.10 Beldar Day 0.10 Cement concrete 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.20x0.20x0.10 m = 0.004 cum P/L CC walls, columns, string courses, coping, bed blocks, 0.004 window sills etc. up to floor f LABOUR Mason 1st class Day 0.02 Mason 2nd class Day 0.02 Beldar Day 0.05 Add water charges @ 1% except on [A] i.e on

Rate

4000.00 1.49 273.00 247.00

4782.36

301.00 273.00 247.00 Total: 150.54

Add C.P & OH @15% except on [A] i.e on 152.05 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 193.99 Rs 193.15

Item Code: 19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12 mm dia steel bar conforming to IS : 1786. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 7354 Plastic encapsulated M.S. foot rest 30x20x15 each 1.00 110.00 9999 Carriage and other sundries L.S. 1.82 1.49 Cement concrete 1:3:6 (0.30x0.20x15 = 0.009 cum) 04.002.05 P/L CC walls, columns, string courses, coping, bed blocks, 0.009 4782.36 window sills etc. up to floor f LABOUR 0123 Mason 1st class Day 0.02 301.00 0124 Mason 2nd class Day 0.20 273.00 0114 Beldar Day 0.05 247.00 Total: Add water charges @ 1% except on [A] i.e on 185.68 Add C.P & OH @15% except on [A] i.e on 187.54 Cost for 1.00 No.

DSR-12

Page 995 of 2298

Rate per Each: Rate as per DSR-12:

Rs 258.71 Rs 256.75

Item Code: 19.17.1 Replacement of MS foot rests in manholes including dismantling concrete blocks: With 20 x 20 mm square bar. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one M.S foot rests MATERIALS 1006 M.S. 20 mm square bar 0.75 m @ 3.137 Kg/m quint 0.024 4250.00 =0.024 q 9999 Carriage,painting, and other sundries L.S. 1.82 1.49 Labour for fabrication 0103 Black smith (2nd class) Day 0.10 273.00 0114 Beldar Day 0.10 247.00 Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.20x0.20x0.10 m = 0.004 cum 04.002.05 P/L CC walls, columns, string courses, coping, bed blocks, 0.004 4782.36 window sills etc. up to floor f LABOUR for dismantling old fort rest cutting holes and fixing new M.S. foot rests 0123 Mason 1st class Day 0.05 301.00 0124 Blacksmith (2nd class) Day 0.05 273.00 0114 Beldar Day 0.10 247.00 Total: Add water charges @ 1% except on [A] i.e on 210.11 Add C.P & OH @15% except on [A] i.e on 212.21 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 263.17 Rs 262.30

Item Code: 19.17.2 Replacement of MS foot rests in manholes including dismantling concrete blocks: With 20 mm diameter round bar.

Code

1003 9999 0103 0114

04.002.05

0123 0124 0114

DSR-12

Description Details of cost for one MS foot rests MATERIALS M.S. roumd bars 20 mm dia 0.75 m @ 2.47 Kg/m =0.018 q Carriage,painting, and other sundries Labour for fabrication Black smith (2 nd class) Beldar Cement concrete 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.20x0.20x0.10 m = 0.004 cum P/L CC walls, columns, string courses, coping, bed blocks, window sills etc. up to floor f LABOUR for dismantling old fort rest cutting holes and fixing new M.S. foot rests Mason 1st class Blacksmith (2nd class) Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

quint L.S.

0.018 1.82

4000.00 1.49

Day Day

0.10 0.10

273.00 247.00

0.004

4782.36

0.05 0.05 0.10

301.00 273.00 247.00 Total:

Day Day Day

Page 996 of 2298

Add water charges @ 1% except on [A] i.e on

180.11

Add C.P & OH @15% except on [A] i.e on 181.91 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 228.33 Rs 227.45

Item Code: 19.18.1 S/F C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 1355 CI man-hole cover without frame - 455x610mm - wt 23 kg each 1.00 980.00 9999

Carriage of C.I. Manhole cover

0114

LABOUR : Beldar

L.S.

7.15

1.49

Day

0.12

247.00 Total: 1020.29

Add water charges @ 1% on

Add C.P & OH @15% on 1030.49 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1185.06 Rs 1185.05

Item Code: 19.18.2 S/F CI cover without frames : 500 mm dia CI cover (MD) cover not less than 58 Kg Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 1357 C.I. Man-hole cover without frame (medium duty) 500 mm each 1.00 internal diameter 9999 Carriage of C.I. cover L.S. 13.47 LABOUR 0114 Beldar Day 0.12 Add water charges @ 1% on

Rate 2210.00 1.49 247.00 Total: 2259.71

Add C.P & OH @15% on 2282.31 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2624.66 Rs 2624.65

Item Code: 19.18.3 S/F CI cover without frames : 560 mm dia CI cover (HD) cover not less than 108 Kg Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 3861 C.I. Man-hole cover without frame (heavy duty) 560 mm each 1.00 internal diameter 9999 Carriage of C. I. cover L.S. 16.12 LABOUR

DSR-12

Rate 4500.00 1.49

Page 997 of 2298

0114

Beldar

Day

0.12

Add water charges @ 1% on

247.00 Total: 4553.66

Add C.P & OH @15% on 4599.20 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 5289.08 Rs 5289.10

Item Code: 19.19.1.1 P/F in position precast RCC manhole cover and frame : L D - 2.5 : Rectangular shape 600x450 mm internal dimensions.

Code 7130

04.001.03 9999 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS Precast R.C.C manhole cover and frame 600x450 mm internal each dimensions Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) 1.00x0.85x0.15 = 0.1275 cum Less cover with frame 0.85x0.70x0.15 = (-) 0.0893 cum = 0.0382 cum Say 0.04 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Carriage of R.C.C cover with frame L.S. Sundries L.S.

Rate

1.00

690.00

0.04

4514.03

6.76 13.52

1.49 1.49 Total: 720.21

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 727.41 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1017.08 Rs 1017.10

Item Code: 19.19.1.2 P/F in position precast RCC manhole cover and frame : L D - 2.5 : Square shape 350 mm internal dimensions. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 7131 R.C.C manhole cover and frame 350 mm square each 1.00 600.00 9999 Carriage of manhole cover L.S. 6.76 1.49 Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) 0.725x0.725x0.15 = 0.0788 cum Less cover with frame 0.575x0.575x0.15 = (-) 0.0496 cum = 0.0292 cum Say 0.03 cum 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.03 4514.03 Coarse sand, 20mmstone a 9999 Sundries L.S. 13.52 1.49 Total: Add water charges @ 1% except on [A] i.e on 630.21 Add C.P & OH @15% except on [A] i.e on 636.51 Cost for 1.00 No.

DSR-12

Page 998 of 2298

Rate per Each: Rate as per DSR-12:

Rs 867.41 Rs 867.40

Item Code: 19.19.1.3 P/F in position precast RCC manhole cover and frame : L D - 2.5 : Circular shape 450 mm internal diameter. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 7132 R.C.C manhole cover and frame 450 mm dia each 1.00 9999 Carriage of manhole cover L.S. 6.76 Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) 3.14/4x(0.775) x0.15 = 0.0708 cum Less cover with frame 3.14/4x(0.625) x0.15 = (-) 0.0460 cum = 0.0248 cum Say 0.03 cum 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.03 Coarse sand, 20mmstone a 9999 Sundries L.S. 13.52 Add water charges @ 1% except on [A] i.e on

Rate 560.00 1.49

4514.03 1.49 Total: 590.21

Add C.P & OH @15% except on [A] i.e on 596.11 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 820.95 Rs 820.95

Item Code: 19.19.2.1 P/F in position precast RCC manhole cover and frame : M D - 10 : Square shape 500 mm internal dimension. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 7133 R.C.C manhole cover and frame : 450mmx450mm square each 1.00 9999

04.001.03 9999

Carriage of manhole cover L.S. Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) 0.95x0.95x0.15 =0.1354 cum Less cover with frame 0.80x0.80x0.15 = (-) 0.096 cum = 0.0394 cum Say 0.04 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Sundries L.S.

Rate 660.00

6.76

1.49

0.04

4514.03

16.64

1.49 Total: 694.86

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 701.81 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 987.64 Rs 987.65

Item Code: 19.19.2.2 P/F in position precast RCC manhole cover and frame : M D - 10 : Circular shape 500 mm internal diameter.

DSR-12

Page 999 of 2298

Code 7134 9999

04.001.03 9999

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS R.C.C manhole cover and frame 500mm dia each Carriage of manhole cover L.S. Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) 3.14/4x(0.95)^2 x0.15 = 0.1064 cum Less cover wjth frame 3.14/4x(0.8)^2 x0.15 = (-) 0.0754 cum = 0.031 cum Say 0.03 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Sundries L.S.

Rate

1.00 6.76

630.00 1.49

0.03

4514.03

16.64

1.49 Total: 664.86

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 671.51 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 907.66 Rs 907.65

Item Code: 19.19.3.1 P/F in position precast RCC manhole cover and frame : HD - 20 : Circular shape 560 mm internal diameter. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 7135 R.C.C manhole cover and frame 560 mm dia each 1.00 9999 Carriage of manhole cover L.S. 13.52 Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) 3.14/4x(1.05)^2 x0.15 = 0.1299 cum Less cover with frame 3.14/4x(0.9)^2 x0.15 = (-) 0.0955 cum = 0.0344 cum Say 0.03 cum 04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.03 Coarse sand, 20mmstone a 9999 Sundries L.S. 20.28 Add water charges @ 1% except on [A] i.e on

Rate 1030.00 1.49

4514.03 1.49 Total: 1080.36

Add C.P & OH @15% except on [A] i.e on 1091.16 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1390.25 Rs 1390.25

Item Code: 19.19.4.1 P/F in position precast RCC manhole cover and frame : EHD - 35 : Circular shape 560 mm internal dia. Details of Cost for : 1.00 No. Code Description Unit Quantity MATERIALS 7136 R.C.C manhole cover and frame 560 mm dia each 1.00 9999 Carriage of manhole cover L.S. 13.52 Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) 3.14/4x(1.05)^2 x0.15 = 0.1299 cum

DSR-12

Rate 1150.00 1.49

Page 1000 of 2298

04.001.03 9999

Less cover with frame 3.14/4x(0.9)^2 x0.15 = (-) 0.0955 cum = 0.0344 cum Say 0.03 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a Sundries L.S.

0.03

4514.03

20.28

1.49 Total: 1200.36

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1212.36 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1529.63 Rs 1529.65

Item Code: 19.20 S/F CI cover 300x300mm w/o frame for gully trap. Code 1353 9999 0114

Description MATERIALS C.I. Cover for gully trap (standard pattern ) Carriage for cover LABOUR Beldar

Details of Cost for : 1.00 No. Unit Quantity

Rate

each L.S.

1.00 2.70

200.00 1.49

Day

0.03

247.00 Total: 211.43

Add water charges @ 1% on

Add C.P & OH @15% on 213.54 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 245.57 Rs 245.55

Item Code: 19.21.1 Making connection of drain or sewer line with existing man- hole including breaking. For pipes 100 to 230 mm dia.

Code

04.001.03

13.009.01

0123

DSR-12

Description

Details of Cost for : 1.00 No. Unit Quantity

MATERIALS Cement concrete 1:2:4 mix ( 1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) = 0.30x0.30x0.23 m = 0.0207 cum Less pipe = 1/2x3.14x0.23x0.23x0.23 = 0.0096 cum = 0.0111 cum Say 0.10 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a 12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand ) finished with a floating coat of neat cement 2x0.35x0.35=0.25 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. LABOUR (For cutting holes average size 30x30 cm in 23 cm thick wall and making channel etc.) Mason 1st class Day

Rate

0.01

4514.03

0.25

173.09

0.12

301.00

Page 1001 of 2298

0124 0114 9999

Mason 2nd class Beldar Add for delay sundries etc.

Day Day L.S.

0.12 0.25 20.15

Add water charges @ 1% except on [A]+[B] i.e on

273.00 247.00 1.49 Total: 160.65

Add C.P & OH @15% except on [A]+[B] i.e on 162.26 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 275.01 Rs 275.00

Item Code: 19.21.2 Making connection of drain or sewer line with existing man- hole including breaking. For pipes 250 to 300 mm dia.

Code

04.001.03

13.009.01

0123 0124 0114 9999

Description Details of cost for one connection MATERIALS Cement concrete 1:2:4 mix ( 1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) = 0.35x0.35x0.30 m = 0.037 cum Less pipe = 1/2x3.14x0.30x0.30x0.30 = 0.021 cum = 0.016 cum Say 0.02 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a 12 mm cement plater 1:3(1 cement: 3 coarse sand ) finished with a floating coat of neat cement 2x0.40x0.40 =0.32 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. LABOUR (For cutting holes average size 30x30 cm in 23 cm thick wall and making channel etc.) Mason 1 st class Mason 2nd class Beldar Add for delay sundries etc.

Details of Cost for : 1.00 No. Unit Quantity

Day Day Day L.S.

Rate

0.02

4514.03

0.32

173.09

0.12 0.12 0.25 20.67

301.00 273.00 247.00 1.49 Total: 161.43

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 163.04 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 333.17 Rs 333.15

Item Code: 19.21.3 Making connection of drain or sewer line with existing man- hole including breaking. For pipes 350 to 450 mm dia.

Code

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one connection MATERIALS Cement concrete 1:2:4 mix ( 1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) = 0.50x0.50x0.30 m = 0.075 cum Less pipe = 1/2x3.14x0.45x0.45x0.30 = 0.048 cum

Rate

Page 1002 of 2298

04.001.03

13.009.01

0123 0124 0114 9999

= 0.027 cum Say 0.03 cum P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a 12 mm cement plater 1:3(1 cement: 3 coarse sand ) finished with a floating coat of neat cement Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Rate as per item no 13.9.1 of SH : Finishing LABOUR (For cutting holes average size 30x30 cm in 23 cm thick wall and making channel etc.) Mason 1st class Mason 2nd class Beldar Add for delay sundries etc.

Day Day Day L.S.

0.03

4514.03

0.60

173.09

0.16 0.16 0.33 26.91

301.00 273.00 247.00 1.49 Total: 213.45

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 215.58 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 487.19 Rs 487.20

Item Code: 19.22.1 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole:- 100 mm dia. sand cast iron drop connection. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one drop connection MATERIALS 1617 100 mm diameter sand cost iron pipe = each 0.55556 990.00 38+30+33 =101 cm say 1 metre =1/1.8 pipes = 0.55556nos 9999 Carriage of pipe L.S. 1.43 1.49 Cutting charges 18.083.02 Labour for cutting C.I. pipe with steel saw : 100 mm diametre 3.00 55.65 C.I. pipe. water supply 1336 Cleaning eye with chain and lid each 1.00 44.00 1621 Sand cast iron bend plain each 1.00 210.00 1628 Sand cast iron tee each 1.00 310.00 Brick work in cement mortar 1:4(1 cement: 4 coarse sand)

06.001.01

DSR-12

0.20x0.20x0.23 = 0.009 cum Less pipe 1/2x3.14x0.10x0.10x0.23 = 0.002 cum = 0.007 cum Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 0.40x0.45x1.05 m = 0.189 cum 0.40x0.25x0.40 = 0.040 cum = 0.229 cum Less pipe portion 1/2x3.14x0.10x0.10x1.50 = 0.012 cum Toothing portion 2x0.40x0.05x0.10 m = 0.004 cum = 0.016 cum

0.007

3508.25

Page 1003 of 2298

04.001.11

13.009.01

12.039.01 9999

05.009.02 9999

0123 0124 0114

Net 0.229-0.016 = 0.213 cum Say 0.21 cum P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 1x0.25x0.25 m = 0.0625-S.ay 0.06 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Providing lead caulked joints to 100 mm diameter pipe and special Providing lead caulked joints to SCI RWP and fittings: 100 mm dia. pipe. Providing joint to S.W. pipe with cement mortar 1:1(1 L.S. cement: 1 fine sand) Form work 1.30x1.05 m= 1.36 sqm Centering & shuttering including strutting, propping etc. Walls including attached pilas Sundries including carriage of bends etc. L.S. LABOUR For cutting holes 5 cm deep in alternate course of brick work benching and channel Mason 1st class Day Mason 2nd class Day Beldar Day

0.21

3087.47

0.06

173.09

4.00

207.85

26.91

1.49

1.36

285.14

26.91

1.49

0.70 0.70 2.70

301.00 273.00 247.00 Total: 2265.03

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 2287.68 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 4700.29 Rs 4700.30

Item Code: 19.22.2 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole:- 150 mm dia. sand cast iron drop connection. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS 150 mm diameter sand cost iron pipe = 1618 34.5+30+37 =101.5cm say 1.00m each 0.55556 1630.00 9999 Carriage of pipe L.S. 1.82 1.49 Cutting charges 18.083.04 Labour for cutting C.I. pipe with steel saw : 150 mm diametre 3.00 104.70 C.I. pipe. water supply 1337 Cleaning eye with chain and lid each 1.00 50.00 1622 Sand cast iron bend plain each 1.00 470.00 7087 Sand cast iron tee each 1.00 505.00 Brick work in cement mortar 1:4(1 cement: 4 coarse sand)

06.001.01

DSR-12

0.20x0.20x0.23 = 0.009 cum Less pipe 1/2x3.14x0.15x0.15x0.23 = 0.004 cum = 0.005 cum Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

0.005

3508.25

Page 1004 of 2298

04.001.11

13.009.01

12.039.02 9999

05.009.02 9999

0123 0124 0114

0.45x0.50x1.15 m = 0.259 cum 0.45x0.25x0.45 = 0.0510 cum = 0.310 cum Less pipe portion 1/4x3.14x0.15x0.15x1.50 = 0.027 cum Toothing portion 3x0.45x0.05x0.10 m = 0.004 cum = 0.031 cum Net 0.310-0.031 = 0.279 cum Say 0.28 cum P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement 1x0.25x0.25m = 0.0625 Say 0.06 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Providing lead caulked joints to 150 mm diameter pipe and special Providing lead caulked joints to SCI RWP and fittings: 150 dia. pipe. Providing joint to S.W. pipe with cement mortar 1:1 (1 L.S. cement: 1 fine sand) Form work 1.450x1.15 m= 1.67 sqm Centering & shuttering including strutting, propping etc. Walls including attached pilas Sundries including carriage of bends etc. L.S. LABOUR For cutting holes 45 holes 5 cm deep toothing in alternate course of brick work benching and making channel Mason 1st class Mason 2nd class Beldar

Day Day Day

0.28

3087.47

0.06

173.09

4.00

287.10

39.91

1.49

1.67

285.14

34.06

1.49

0.85 0.85 3.50

301.00 273.00 247.00 Total: 3395.89

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 3429.85 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6775.43 Rs 6775.45

Item Code: 19.23.1 Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection.

Code 1617 9999

DSR-12

Description

Details of Cost for : 1.00 m Unit Quantity

MATERIALS 100 mm diameter sand cost iron pipe 1 meter each Carriage of materials and fixing charges L.S. Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 0.40x0.45x1.00 mm = 0.18 cum . Less pipe portion 1/2x3.14x0.10x0.10x1.00 = 0.008 cum Toothing portion 5x0.40x0.05x0.10 m = 0.010 cum = 0.018 cum

0.55556 13.39

Rate 990.00 1.49

Page 1005 of 2298

04.001.11

05.009.02 9999

0123 0124 0114

Net 0.18-0.018 = 0.162 cum Say 0.16 cum P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag Form work 1.30x1.00 m= 1.30 sqm Centering & shuttering including strutting, propping etc. Walls including attached pilas Sundries L.S. LABOUR For cutting holes 5 cm deep in alternate course of brick work Mason lstclass Mason 2nd class Beldar

Day Day Day

0.16

3087.47

1.30

285.14

7.15

1.49

0.04 0.04 0.04

301.00 273.00 247.00 Total: 613.44

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 619.57 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1577.19 Rs 1577.20

Item Code: 19.23.2 Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 150 mm dia. sand cast iron drop connection.

Code 1618 9999

04.001.11

05.009.02 9999

0123 0124 0114

Description

Details of Cost for : 1.00 m Unit Quantity

MATERIALS 150 mm diameter sand cost iron pipe 1 meter each Carriage of materials and fixing charges L.S. Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 0.45x0.50x1.00 mm = 0.225 cum Less pipe portion 1/2x3.14x0.15x0.15x1.00 = 0.018 cum Toothing portion 5x0.45x0.05x0.10 m = 0.011 cum = 0.029 cum Net 0.225-0.029 = 0.196 cum Say 0.20 cum P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag Form work 1.45x1.00 m= 1.45 sqm Centering & shuttering including strutting, propping etc. Walls including attached pilas Sundries L.S. LABOUR For cutting 5 cm deep in alternate course of brick work Mason 1st class Day Mason 2nd class Day Beldar Day

Rate

0.55556 13.39

1630.00 1.49

0.20

3087.47

1.45

285.14

8.09

1.49

0.05 0.05 0.05

301.00 273.00 247.00 Total: 978.61

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 988.40 Cost for 1.00 m Rate per One Metre:

DSR-12

Rs 2167.60

Page 1006 of 2298

Rate as per DSR-12:

Rs 2167.60

Item Code: 19.24.1 Dismantling of manhole i/c R.C.C. top slab, C.I cover with frame. Rectangular manhole 90x80cm and 45 cm deep.

Code

15.002.02

15.007.04

15.002.01

15.003 9999

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost of a manhole 90x80 and 45 cm deep Dismantling of cement concrete 1:4:8 (1 cement: 4 coarse sand 8 : aggregate stone 40 mm nominal size) 1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum Demolishing cement concrete: 1 : 4 : 8 or leaner. 0.43 Dismantling of second class brick work in Cement mortar 1:4 (1cement : 4 coarse sand) 4.32x0.23x0.35 m =0.348 cum Less for pipe 2x3.14x(0.15m)^2 x0.23m = (-) 0.008 cum = 0.340 cum Demolishing brick work : In cement mortar. 0.34 Dismantling cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For benching 2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum Less for pipe 1x0.90x3.14/4x(0.15m) = (-) 0.02 cum = 0.16 cum Demolishing cement concrete: 1 : 3 : 6 or richer. 0.16 Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) For slab : 1.36x1.26x0.15m = 0.257 cum Less for cover 0.61x0.455x0.15m = (-) 0.042 cum = 0.215 cum Say 0.22 cum Demolishing R.C.C. work. 0.22 Removal of C.I. Cover with frame L.S. 7.15 Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Rate

413.63

566.58

671.05

978.97 1.49 Total: 10.65

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 10.76 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 705.61 Rs 705.60

Item Code: 19.24.2 Dismantling of manhole i/c R.C.C. top slab, C.I cover with frame. Rectangular manhole 120x90cm and 90 cm deep.

Code

15.002.02

15.007.04

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost of a manhole 120x90 and 90 cm deep Dismantling of cement concrete 1:4:8 (1 cement: 4 coarse sand 8 : aggregate stone 40 mm nominal size) 1.81x1.51x0 20 m = 0.547 cum Say 0.55 cum Demolishing cement concrete: 1 : 4 : 8 or leaner. 0.55 Dismantling of second class brick work in cement mortar 1 :4 (1 cement : 4 coarse sand) 5.12x0.23x0.30m = 0.942 cum Less for pipe 2x3.14x(0.15m)^2 x0.23 m = (-) 0.008 cum = 0.934 cum Say 0.93 cum Demolishing brick work : In cement mortar. 0.93 Dismantling cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Rate

413.63

566.58

Page 1007 of 2298

15.002.01

15.003 9999

2x1.20x0.90x(0.80/2) x (0.30+0.20)/2 = 2.70 cum Less for pipe 1.20x3.14/4x(0.15m)^2 = (-) 0.021 cum = 0.249 cum say 0.25 Demolishing cement concrete: 1 : 3 : 6 or richer. Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) For slab : 1.66x 1.36x0.15m = 0.339 cum Less for cover 0.7854x(0.50 (0.15m)^2 = (-) 0.029 cum = 0.31 cum Demolishing R.C.C. work. Removal of C.I. Cover with frame L.S.

0.25

671.05

0.31 7.15

978.97 1.49 Total: 10.65

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 10.76 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1238.03 Rs 1238.05

Item Code: 19.24.3 Dismantling of manhole i/c R.C.C. top slab, C.I cover with frame. Rectangular arch type man hole 140 x 90 cm and 2.45 mtr deep.

Code

15.002.02

15.007.04

15.002.01

15.003 9999 9999

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost of a manhole 140x90 and 2.45 m deep Dismantling of cement concrete 1:4:8 (1 cement: 4 coarse sand 8 : aggregate stone 40 mm nominal size) 2.16m x1.66m x 0.20m = 0.72 cum Demolishing cement concrete: 1 : 4 : 8 or leaner. 0.72 Dismantling of second class brick work in cement mortar 1:4 (1 cement: 4 coarse sand) Brick work in item 5.52mx0.23mx1.20m = 1.524 cum 3.92mx0.23mx1.15m= 1.037 cum = 2.561 cum Deduct arch ring and portion of pipe 2x 1/2 x3.14x0.25mx0.23x0.1m = 0.018 cum 2x3.14/4(0.15)^2 xO.23m = 0.008 cum = (-) 0.026 cum Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum Brick work in arch ½ x3.14x1.13x0.80x0.23m = 0.327 cum 2x ½ x3.14x0.25mx0.23x0.1m = 0.018 cum = 0.345 cum Say 0.35 cum Net = 2.54+0.35 = 2.89 cum Demolishing brick work : In cement mortar. 2.89 Dismantling cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 2x1.4x0.90/2x(0.20+0.30)/2 = 0.315 cum Less pipe 1.4x3.14/4x(0.15)^2 = (-) 0.025 cum = 0.290 cum Demolishing cement concrete: 1 : 3 : 6 or richer. 0.29 Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) 1.36mx1.06mx0.15 = 0.216 cum Less cover 3.14x(0.25)^2 x0.15 = (-) 0.029 cum = 0.187 cum Say 0.19 cum Demolishing R.C.C. work. 0.19 Removal of C.I. Cover with frame L.S. 7.15 Removal of M.S foot rest L.S. 8.06

Rate

413.63

566.58

671.05

978.97 1.49 1.49

Page 1008 of 2298

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 22.66

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 22.89 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2342.15 Rs 2342.20

Item Code: 19.24.4 Dismantling of manhole i/c R.C.C. top slab, C.I cover with frame. Circular manhole 122 cm dia. and 1.68 M deep.

Code

15.002.01

15.007.04

15.002.01 9999 9999

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost of a manhole 1.22 in internal diameter 1.68m deep Dismantling of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 aggregate stone 40 mm nominal size) 1.98mx1.98mx0.30m=1.178cum say 1.18cum Demolishing cement concrete: 1 : 3 : 6 or richer. Cum 1.18 Dismantling of second class brick work in cement mortar 1:4 (1 cement: 4 coarse sand) Curved on plan 3.14x1.45x0.24x0.23= 0.251 3.14x(1.45+0.79)/2x1.32x0.23 = 1.069 = 1.320 Deduct arch ring and portion of pipe 2x ½ x3.14x0.25mx0.23x0.10m = 0.018 cum 2x3.14/4(0.15)^2 x0.23m = 0.008 cum = 0.026 cum Net quantity 1.320 - 0.026 = 1.294 Say 1.29 cum Brick work in arches 2 x ½ x3.14x0.25mx0.230x0.10m = 0.018 cum say 0.02 cum Total = 1.294+0.02 = 1.314 cum say 1.131 cum Demolishing brick work : In cement mortar. 1.31 Dismantling cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) For benching 3.14/4x(1.22)^2 x0.20 = 0.234 cum [(2x8.133)/360]x(4/3)x3.14x(0.61)^3 = 0.043 cum = 0.277 cum Less pipe:1.22x3.14/4x(0.15)^2 (-)=0.0216cum = 0.2554 cum say 0.26 cum In cover fixing 0.7854x1.020x1.020x0.15m = 0.123 cum Less cover 3.14/4x(0.28)^2 x0.15m : (-) = 0.037 cum = 0.086 cum say 0.09 cum Total = 0.26 + 0.09 = 0.35 cum Demolishing cement concrete: 1 : 3 : 6 or richer. 0.35 Removal of S.F.R.C Cover with frame size L.S. 7.15 560 mm diameter (medium duty) Removal of M.S foot rests L.S. 8.06 Add water charges @ 1% except on [A]+[B]+[C] i.e on

Rate

671.05

566.58

671.05 1.49 1.49 Total: 22.66

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 22.89 Cost for 1.00 No.

DSR-12

Page 1009 of 2298

Rate per Each: Rate as per DSR-12:

Rs 1795.25 Rs 1795.30

Item Code: 19.25.1 Extra for depth of manholes dismantled : Rectangular manhole 90x80 cm and 45 cm deep. Details of Cost for : 1.00 m Code Description Unit Quantity Dismantling of second class brick work in cement mortar 1:5 (1 Cement: 5 fine sand) 4.32x0.23x1.0m = 0.994 cum Say 0.99 cum 15.007.04 Demolishing brick work : In cement mortar. Cum 0.99 9999 Removing of M.S. foot rests L.S. 1.82 Add water charges @ 1% except on [A] i.e on

Rate

566.58 1.49 Total: 2.71

Add C.P & OH @15% except on [A] i.e on 2.74 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 564.06 Rs 564.10

Item Code: 19.25.2 Extra for depth of manholes dismantled : Rectangular manhole 120x90 cm and 90 cm deep. Details of Cost for : 1.00 m Code Description Unit Quantity Details of cost for one metre Dismantling of second class brick work in cement mortar 1:5 (1 Cement: 5 fine sand) 5.12x0.23x1.0m = 1.178 cum Say 1.18 cum 15.007.04 Demolishing brick work : In cement mortar. 1.18 9999 Removing of M.S. foot rests L.S. 1.82 Add water charges @ 1% except on [A] i.e on

Rate

566.58 1.49 Total: 2.71

Add C.P & OH @15% except on [A] i.e on 2.74 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 671.71 Rs 671.75

Item Code: 19.25.3 Extra for depth of manholes dismantled : Rectangular arch type manhole 140 x 90 cm and 2.45 m deep (upto 4.25 m depth).

Code

DSR-12

Details of Cost for : 1.80 m Description Unit Quantity Details of cost of dismantling one manhole 4.25m deep Dismantling Ilnd class brick work in cement mortar 1:4(1 Cement: 4 Coarse sand) for 2.45 depth Qty for 2.45m depth 5.52x0.23x1.20=1.524cum 3.92mx0.23mxl.l5m= 1.037 cum Total= 2.561 cum Deduct arch ring and portion of pipe 2x 1/2 x3.14x0.25mx0.23x0.1 m = 0.018 cum 2x3.14/4(0.15) 1x0.23m = 0.008 cum Total deduction= (-) 0.026 cum Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum Qty in arch

Rate

Page 1010 of 2298

15.007.04

15.002.01

1/2 x3.14xl.l3x0.80x0.23m = 0.327 cum 2x1/2 x3.14xO.25mx0.23x0.1m = 0.018 cum Total= 0.345 cum Say 0.35 cum Total for 2.45 m depth 2.54 + 0.35 = 2.89 cum Qty for 4.25m depth 5.52mx0.23mx1.20m= 1.524 cum 3.92mx0.23mx2.95m = 2.660 cum Total= 4.184 cum Deduct arch ring and portion of pipe 2x 1/2x3.14x0.70mx0.23x0.1m = 0.051 cum 2x3.14/4x(0.60)^2 x 0.230 = 0.130 cum Total deduction= (-) 0.181 cum Net 4.184 - 0.181 = 4.003 cum Say 4.00 cum Qty in arch 1/2 x3.14xl.l3x0.80x0.23m = 0.327 cum 2x /2x3.14x0.70mx0.23x0.1m = 0.051 cum Total= 0.378 cum Say 0.38 cum Total for 4.25 m depth =4.38 cum Net difference = 4.38 - 2.89 = 1.49 cum Demolishing brick work : In cement mortar. Dismantling cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) (Qty for 4.25m depth 2x1.4x(0.90/2)x(0.65+0.75)/2 = 0.882 cum Less pipe :1.4x3.14/4x(0.60 = (-) 0.396 cum = 0.486 cum Say 0.49 cum Qty for 2.45m depth 2x1.4x(0.90/2)x(0.20+0.30)/2 = 0.315 cum Less pipe : 1.4x3.14/4x(0.15) =(-) 0.025 cum = 0.290 cum Say 0.29 cum Net difference = 0.49 - 0.29 = 0.20 cum Demolishing cement concrete: 1 : 3 : 6 or richer. Cum

1.49

566.58

0.20

671.05 Total: 0.00

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 1.80 m Rate per One Metre: Rate as per DSR-12:

Rs 543.56 Rs 543.60

Item Code: 19.25.4 Extra for depth of manholes dismantled : Circular manhole 122 cm dia and 1.68 M deep (upto 2.29 M depth). Details of Cost for : 0.61 m Code Description Unit Quantity Rate Details of cost of dismantling one manhole 2.29m deep Dismantling cement concrete 1:3:6(1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) 1.98x1.98x0.30 = 1.178 cum. Say 1.18 cum 15.002.01 Demolishing cement concrete: 1 : 3 : 6 or richer. 1.18 671.05 Dismantling IInd class brick work in cement mortar 1:4 (1 Cement: 4 Coarse sand) Curved on plan 3.14x1.45x0.85x0.23=0.891 3.14x(1.45+0.79)/2x 1.32x0.23 = 1.069 = 1.96 Duduct arch ring and portion of pipe 2x1/2x3.14x0.25mx0.230x0.10 m = 0.018 cum 2x3.14/4x(0.15)^2 x 0.230 = 0.008 cum Total deduction = 0.026 cum ,

DSR-12

Page 1011 of 2298

15.007.04

15.002.01 9999 9999 19.024.04

Net quantity 1.96-0.026 = 1.934 Say 1.93 cum Qty in arch 2x1/2x3.14x0.25 m x0.230x0.10 m = 0.018 cum Say 0.02 cum Total =1.93+ 0.02= 1.97 cum Demolishing brick work : In cement mortar. Dismantling and demolishing Dismantling cemnet concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominl size ) For benching: 3.14/4x(1.22)^2 x0.20 = 0.234 cum [(2x8.133)/360]x(4/3)x3.14x(0.61)^3 =0.043 cum = 0.277 cum Less pipe : 1.22x3.14/4x(0.15)^2 (-) = 0.0216 cum Net qty= 0.2554 cum Say 0.26 cum For fixing cover : 3.14/4 xd^2 xthickness 0.7854x1.020x1.020x0.15 m =0.123 cum Less cover 3.14/4x(0.28)^2 x 0.15 m : (-) = 0.037 cum Net qty = 0.086 cum Say 0.09 cum Total = 0.26 + 0.09 = 0.35 cum Demolishing cement concrete: 1 : 3 : 6 or richer. Removal of SFRC cover Removal of M.S. foot rests Dismantling of manhole i/c R.C.C. top slab, C.I cover with frame. Circular manhole 122 cm

Cum

1.97

566.58

L.S. L.S. Nos

0.35 7.15 8.09 -1.00

671.05 1.49 1.49 1795.25

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 22.70

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 22.93 Cost for 0.61 m Rate per One Metre: Rate as per DSR-12:

Rs 613.10 Rs 613.10

Item Code: 19.26.1 Raising manhole cover and frame slab to required level. Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5 . Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one manhole Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggegate 20mm nominal size) = 1.36x1.26x0.15=0.257cum Less cover with frame portion 0.85 x 0.70 x 0.15 = (-)0.089 cum Net Qty = 0.168 cum Say 0.17 cum 15.003 Demolishing R.C.C. work. Cum 0.17 978.97 9999 Remaval of RCC cover and frame L.S. 7.15 1.49 R.C.C work 1:2:4 (1 cement : 2 coarse sand : graded stone aggregate 20mm nominal size For raised slab - 1.36x1.26x0.15 =0.257cum Less portion cover with frame =0.85x0.70x0.15=(-)0.089cum Net Qty =0.168cum Say 0.17cum 05.003

DSR-12

RCC in beams, suspended floors, staircases, etc upto floor 5 Cum level excldg centering, shutt Form work = 0.90x0.80 = 0.72sqm

0.17

5494.55

Page 1012 of 2298

Less Cover = 0.60x0.45= (-)0.27 sqm Net Qty = 0.045sqm

05.009.03 9999

Centering & shuttering including strutting, propping etc. - Sqm Suspended floors, roofs, landi Sundries L.S.

0.45

311.22

13.52

1.49 Total: 30.79

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 31.10 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1276.30 Rs 1239.70

Item Code: 19.26.2 Raising manhole cover and frame slab to required level. Rectangular manhole 120x90cm with circular cover 500 mm dia of grade MD-10. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one manhole Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4 aggregate stone 20 mm nominal size) 1.66x1.16x0.15 =0.339

15.003 9999

05.003

05.009.03 9999

Less for RCC cover with frame 3.14/44x(0.80)2x0.15=(-)0.075 cum Net qty 0.264 cum Say 0.26 cum Demolishing R.C.C. work. Removal of R.C.C cover and frame L.S. R.C.C work 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size 1.66x1.36x0.15 = 0.339 cum Less portion cover with frame = 314/4x0.80x0.80x0.15 =(-) 0.075 cum Net qty= 0.264 cum Say 0.26 cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Form work = 1.2x0.90 = 1.08 sqm Less cover = 3.14/4x(0.50)^2 =(-) 0.196 sqm Net qty = 0.884 sqm Say 0.88 sqm Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi Sundries L.S.

0.26 7.15

978.97 1.49

0.26

5494.55

0.88

311.22

16.64

1.49 Total: 35.44

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 35.79 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1998.14 Rs 1942.20

Item Code: 19.26.3 Raising manhole cover and frame slab to required level. Rectangular manhole 120x90cm with circular cover 560 mm dia of grade HD-20. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate

DSR-12

Page 1013 of 2298

15.003 9999

05.003

05.009.03 9999

Details of cost for one manhole Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4 aggregate stone 20 mm nominal size) 1.66x1.36x0.15 = 0.339 cum Less for RCC cover with frame 3.14/4x(0.90jfcx0.15 =(-) 0.095 cum Net qty 0.244 cum Say 0.24 cum Demolishing R.C.C. work. Removal of R.C.C cover and frame L.S. R.C.C work 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1.66x1.36x0.15 = 0.339 cum Less portion cover with frame = 3.14/4x0.90x0.90x0.15 =(-) 0.095 cum Net qty = 0.244 cum Say 0.24 cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt Form work = 1.2x0.90 = 1.08 sqm Less cover = 3.14/4x(0.56)^2 =(-) 0.246 sqm’ Net qty = 0.834 sqm Say 0.83 sqm Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi Sundries L.S.

0.24 7.15

978.97 1.49

0.24

5494.55

0.83

311.22

20.28

1.49 Total: 40.87

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 41.28 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1859.42 Rs 1807.75

Item Code: 19.26.4 Raising manhole cover and frame slab to required level. Circular manhole 140cm dia with circular cover 600 mm dia of grade EHD35 Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one manhole Dismantling of C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4 aggregate stone 20 mm nominal size) =3.14/4x(0.985)^2 x 0.15 = 0.114 cum

15.003 9999

04.002.03 9999

Less for RCC cover with frame 3.14/4x(0.90)^2x0.15 =(-) 0.095 cum Net qty 0.019 cum Say 0.02 cum Demolishing R.C.C. work. Removal of R.C.C cover and frame L.S. C.C work 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) =3.14/4x(0.985)^2x0.15 = 0.114 cum Less portion cover with frame = 3.14/4x0.90x0.90x0.15 =(-) 0.095 cum Net qty = 0.019 cum Say 0.02 cum P/L CC walls string courses, coping, bed blocks, window sills Cum ,etc. up to floor five level Sundries L.S.

0.02 8.06

978.97 1.49

0.02

5272.38

20.28

1.49 Total: 42.23

Add water charges @ 1% except on [A]+[B] i.e on

DSR-12

Page 1014 of 2298

Add C.P & OH @15% except on [A]+[B] i.e on 42.65 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 174.08 Rs 169.75

Item Code: 19.27.1 Constructing brick masonry road gully chamber 50 x 45 x 60 cm with bricks of class designation 75 in C.M 1:5 : With F.P.S. bricks.

Code

04.001.11

06.001.01

13.009.01

04.002.03

05.009.02 7380 9999 9999

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one chamber MATERIALS Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 1.11x1.06x0.15=0.176 say 0.18cum P/L CC excluding centering - All work up to plinth level: 1:5:10 0.18 Fine sand, 40mmstone ag Brick work in bricks of clas designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) 2.82 m x 0.23m x0.45 m = 0.29 cum Brick work with F.P.S. bricks of class desgn 75 in foundation 0.29 and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3(1 cement: 3 coarse sand) finished with floating coat of neat cement Wall: 1.90x0.45 m = 0.855 sqm Bed : 0.45x0.50 m = 0.225 sqm Total= 1.080 sqm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 1.08 floating coat of neat cement. Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 2.82x0.23x0.15 m = 0.097 cum Say 0.10 cum P/L CC walls string courses, coping, bed blocks, window sills 0.10 ,etc. up to floor five level Form work 3.50x0.15 m = 0.525 sqm Say 0.53 sqm Centering & shuttering including strutting, propping etc. 0.53 Walls including attached pilas Precast R.C.C.gully grating with frame each 1.00 500x450 mm Carriage of R.C.C. grating L.S. 7.15 Fixing R.C.C. grating L.S. 5.33 Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E] i.e on

Rate

3087.47

3508.25

173.09

5272.38

285.14 650.00 1.49 1.49 Total: 668.59

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E] i.e on 675.28 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3215.00 Rs 3193.50

Item Code: 19.28.1 Constructing brick masonry road gully chamber 45 x 45 x 77.5 cm with bricks of class designation 75 in C.M 1 : 5: With F.P.S bricks.

Code

DSR-12

Description

Details of Cost for : 1.00 No. Unit Quantity

Rate

Page 1015 of 2298

04.001.11

06.001.01

13.009.01

04.002.03

05.003

0155 05.009.02

05.022.01

7381 9999

Details of cost for one chamber Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 1.06mxl.1.06mx0.15 m= 0.17 cum Say .17 cum P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum Fine sand, 40mmstone ag Brick work in bricks of class designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) 2.72 m x 0.23m x0.70 m = 0.438 cum Deduct opening 0.45x0.23x0.10 m = 0.01 cum Block 3x(0.075)^3 = 0.001 cum Total deduction= 0.011 cum Net qty. = 0.438 (-) 0.011 = 0.427 cum Say 0.43 cum Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement Wall: 1.80x0.70 m= 1.26 sqm Bed : 0.45x0.45 m = 0.202 sqm Top : 0.45x0.20 m = 0.09 sqm Sides: 2x0.20x0.10 m = 0.04 sqm Total= 1.592 sqm Deduct opening 0.45x0.10 m = 0.045 sqm Net qty. = 1.592 (-) 0.045 = 1.547 cum Say 1.55 cum Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Block = 3 (0.75)^3 = 0.001 cum P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level R.C.C. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). 0.91x0.91x0.075 m = 0.062 cum Say 0.06 cum RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shutt 0.45x0.45 m = 0.202 sqm 0.45x0.20 m = 0.09 sqm outside slab : 3.40x0.075 m = 0.255 sqm Total= 0.547 sqm Say 0.55 sqm Dedduct labour for not lifting material upto floor five level - day Coolie Centering & shuttering including strutting, propping etc. - Sqm Walls including attached pilas Mild steel reinforcement for R.C.C work 0.062 cum @ 80 kg/cum = 4.96 kg Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi Vertical R.C.C.grating 450x100 mm Fixing and carriage of R.C.C. grating

each L.S.

0.17

3087.47

0.43

3508.25

1.55

173.09

0.001

5272.38

0.06

5494.55

-0.113

247.00

0.55

285.14

4.96

56.77

1.00 20.67

305.00 1.49 Total: 307.89

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on 310.97 Cost for 1.00 No. Rate per Each:

DSR-12

Rs 3432.68

Page 1016 of 2298

Rate as per DSR-12:

Rs 3451.90

Item Code: 19.29.1 Constructing brick masonry road gully chamber 110 x 50 x 77.5 cm with bricks of class designation 7.5 in C.M 1 : 5: With common burnt F.P.S. bricks. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one chamber Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 1.71mx1.71mx0.15m = 0.285 cum Say 0.29 cum 04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.29 3087.47 Fine sand, 40mmstone ag Brick work in bricks of clas designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) 1.91 m x 0.23m x0.45 m = 0.199 cum 2.20mx0.23mx0.70 m = 0.354 cum Total= 0.553 cum Deduct lintel portion 2x0.23x0.20x0.20 m = (-) 0.018 cum Net qty= 0.0535 cum Say 0.54 cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.54 3508.25 and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement Wall: 1.80x0.70 m = 1.26 sqm Wall: 1.40x0.45 m = 0.63 sqm Bed: 1.10x0.50 m = 0.55 sqm Total= 2.44 sqm Deduct 2x0.20x0.20 m = (-) 0.08 sqm Net qty= 2.36 sqm 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 2.36 173.09 floating coat of neat cement. Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Block = 1.92x0.23x0.15 = 0.07 cum 04.002.03 P/L CC walls string courses, coping, bed blocks, window sills 0.07 5272.38 ,etc. up to floor five level R.C.C. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 0.88x0.96x0.075 m = 0.063 cum Say 0.06 cum 05.003 RCC in beams, suspended floors, staircases, etc upto floor 5 0.06 5494.55 level excldg centering, shutt Deduct labour for not lifting material upto floor five level 0115

05.013

05.009.02

DSR-12

Coolie Day RCC 1:2:4 in lintels 1x0.96x0.20x0.20 m = 0.04 cum P/H/F up to floor 5 level precast RCC in small lintels including Cum centering, shuttering, fi Form work Slab bottom 0.50x0.65 m = 0.325 sqm Outer periphery 3.50x0.075 m = 0.263 sqm 2.20x0.15 m = 0.330 sqm Total= 0.918 sqm Say 0.91 sqm Centering & shuttering including strutting, propping etc. - Sqm Walls including attached pilas Mild steel reinforcement for R.C.C work (0.06+0.04) = 0.10 cum @ 80 kg/cum = 8.00 kg

-0.113

247.00

0.04

7244.98

0.91

285.14

Page 1017 of 2298

05.022.01 7380 9999 7381 9999

Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi Precast R.C.C.gully grating with frame 500x450 mm Carriage of R.C.C. grating Precast R.C.C.grating 450x100 mm vertical Labour for fixing pre cast R.C.C. grating and

each L.S. each L.S.

8.00

56.77

1.00 7.15 1.00 34.06

650.00 1.49 305.00 1.49 Total: 988.49

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on 998.37 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 6048.63 Rs 6111.70

Item Code: 19.30.1.1 Constructing brick masonry chamber for under ground C.I inspection chamber :- Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With F.P.S. bricks. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one chamber Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 1.22mx1.065mx0.15m=0.195 cum Say 0.20 cum 04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.20 3087.47 Fine sand, 40mmstone ag Brick work in bricks of clas designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) 3.05 m x 0.23m x0.30 m = 0.210 cum Less pipe 2x3.14/4x(0.10)^2 x0.23 m = (-) 0.004 cum Net qty= 0.206 cum Say 0.21 cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.21 3508.25 and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement Wall: 2.13x0.30 m = 0.639 sqm Bed : 0.61x0.455 m = 0.278 sqm Total= 0.917 sqm Less pipe 2x3.14/4x(0.10)^2 = (-) 0.016 sqm Net qty = 0.901 sqm Say 0.90 sqm 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 0.90 173.09 floating coat of neat cement. Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 3.05x0.23x0.15 = 0.105 cum say 0.11 cum 04.002.03 P/L CC walls string courses, coping, bed blocks, window sills 0.11 5272.38 ,etc. up to floor five level Form work Outer periphery 3.73x0.15 m = 0.56 sqm 05.009.02 Centering & shuttering including strutting, propping etc. - Sqm 0.56 285.14 Walls including attached pilas 1354 C.I. Cover with frame 455x610 mm each 1.00 1415.00 9999 Carriage of C.I.cover and frame L.S. 7.15 1.49 9999 Painting of C.I. Cover and frame with coal tar L.S. 7.15 1.49 9999 Sundries L.S. 13.52 1.49 Total: Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E] i.e on 1456.44

DSR-12

Page 1018 of 2298

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E] i.e on 1471.00 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 3941.29 Rs 3917.65

Item Code: 19.30.2.1 Constructing brick masonry chamber for under ground C.I inspection chamber :- Inside dimensions 500x700 mm and 45 cm deep for pipe line: With F.P.S. bricks. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost of one no. Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 1.31mx1.11rnx0.15 m= 0.22 cum 04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.22 3087.47 Fine sand, 40mmstone ag Brick work in oncks of clas designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) 3.32 m x 0.23m x0.30 m = 0.229 cum Less pipe 3x3.14x(0.10)^2 x0.23 m = (-) 0.005 cum Net qty= 0.224 cum Say 0.22 cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.22 3508.25 and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement Wall: 2.40x0.30 m = 0.72 sqm Bed : 0.70x0.50 m = 0.35 sqm = 1.07 sqm Less pipe 3x3.14/4x(0.10)^2 = (-) 0.02 sqm Net qty= 1.05 sqm 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 1.05 173.09 floating coat of neat cement. R.C.C 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1.16x0.96x0.15 = 0.167 cum Deduct cover 0.61x0.45x0.15 m = (-) 0.042 cum Net qty= 0.125 cum Say 0.13 cum 05.003 RCC in beams, suspended floors, staircases, etc upto floor 5 0.13 5494.55 level excldg centering, shutt Form work Inside area of chamber : 0.70x0.50 m = 0.35 sqm Outer periphery 4.00x0.15 m = 0.60 sqm = 0.95 sqm Deduct cover : 0.61x0.455 m = (-) 0.278 sqm = 0.672 sqm Say 0.67 sqm 05.009.02 Centering & shuttering including strutting, propping etc. - Sqm 0.67 285.14 Walls including attached pilas M.S.reinforcement for slab 0.13 cum @ 48.06 kg/cum = 6.25 kg 05.022.01 Reinforcement for R.C.C. work all complete. -Upto plinth level 6.25 56.77 Mild steel and Medium Tensi 1354 C.I. Cover with frame 455x610 mm each 1.00 1415.00 9999 Carriage of C.I. Cover and frame L.S. 7.15 1.49 9999 Painting of C.I. Cover and frame with coal tar L.S. 7.15 1.49 9999 Sundries L.S. 13.52 1.49

DSR-12

Page 1019 of 2298

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Total: 1456.44

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 1471.00 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 4584.59 Rs 4556.55

Item Code: 19.30.3.1 Constructing brick masonry chamber for under ground C.I inspection chamber :- Inside dimensions 600x850 mm and 45 cm deep for pipe line: With F.P.S. bricks. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost of one chamber Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 1.46rnxl.21mx0.15 m= 0.26 cum 04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.22 3087.47 Fine sand, 40mmstone ag Brick work in oncks of clas designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) 3.82 m x 0.23m x0.30 m = 0.26 cum Less pipe 5x3.14/4x(0.10)^2 x0.23 m = (-) 0.009 cum Net qty= 0.251 cum Say 0.26 cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.22 3508.25 and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement Wall: 2.90x0.30 m = 0.87 sqm Bed : 0.85x0.60 m = 0.51 sqm = 1.38 sqm Less pipe 5x3.14/4x(0.10) = (-) 0.04 sqm Net qty = 1.34 sqm 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 1.05 173.09 floating coat of neat cement. R.C.C 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1.31x1.06x0.15 = 0.208 cum Deduct cover 0.61x0.455x0.15 m = (-) 0.042 cum Net qty= 0.166 cum Say 0.17 cum 05.003 RCC in beams, suspended floors, staircases, etc upto floor 5 0.13 5494.55 level excldg centering, shutt Deduct labour for not lifting material upto floor five level 0115

05.009.02

DSR-12

Coolie Day Form work Inside area of chamber : 0.85x0.60 m = 0.511 sqm Outer periphery 4.50x0.15 m = 0.675 sqm = Total 1.186 sqm Deduct cover : 0.61x0.455 m = (-) 0.278 sqm Net qty= 0.908 sqm Say 0.91 sqm Centering & shuttering including strutting, propping etc. - Sqm Walls including attached pilas M.S.reinforcement for slab for 0.17 cum @ 48.06 kg/cum = 48.06x0.17cum = 8.17kg

-0.24

247.00

0.67

285.14

Page 1020 of 2298

05.022.01 1354 9999 9999 9999

Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi C.I. Cover with frame 455x610 mm Carriage of C.I. Cover and frame Painting of C.I. Cover and frame with coal tar Sundries

each L.S. L.S. L.S.

6.25

56.77

1.00 7.15 7.15 13.52

1415.00 1.49 1.49 1.49 Total: 1397.16

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on 1411.13 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 4515.74 Rs 5259.10

Item Code: 19.31.1.1 Extra for depth beyond 45 cm of brick masonry chamber :- For 455 x 610 mm size : Details of Cost for : 1.00 m Code Description Unit Quantity Details of cost for one metre Brick work in bricks of clas designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) 3.05 x 0.23m x 1.00m = 0.70 cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.70 and plinth in: CM 1:4 (1 cem 12mm cement plaster1:3 (1 cement: 3 coarse sand finished with floating coat of neat cement Wall: 2.13x1.00 m = 2.13 sqm 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 2.13 floating coat of neat cement. Add water charges @ 1% except on [A]+[B] i.e on

Rate

3508.25

173.09 Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2824.46 Rs 2824.45

Item Code: 19.31.2.1 Extra for depth beyond 45 cm of brick masonry chamber :- For 500 x 700 mm size : With F.P.S. bricks. Details of Cost for : 1.00 m Code Description Unit Quantity Details of cost for one metre Brick work in bricks of clas designation 75 in cement mortar 1:4(1 cement: 4 coarse sand) 3.32 x 0.23m x 1.00m = 0.76 cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.76 and plinth in: CM 1:4 (1 cem 12mm cernem plaster1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement Wall: 2.40x1.00 m = 2.40 sqm 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 2.40 floating coat of neat cement.

DSR-12

Rate

3508.25

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00

Page 1021 of 2298

Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3081.69 Rs 3081.70

Item Code: 19.31.3.1 Extra for depth beyond 45 cm of brick masonry chamber :- For 600 x 850 mm size : With F.P.S. bricks. Details of Cost for : 1.00 m Code Description Unit Quantity Details of cost for one metre Brick work in bricks of clas designation 75 in cement mortar 1:4 ( 1 cement: 4 coarse sand) 3.82 m x 0.23m xl.00 m = 0.88 cum 06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation 0.88 and plinth in: CM 1:4 (1 cem 12 mm cement plaster 1:3(1 cement: 3 coarse sand finished with floating coat of neat cement Wall : 2.90x1.00 m = 2.90 sqm 13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a 2.90 floating coat of neat cement. Add water charges @ 1% except on [A]+[B] i.e on

Rate

3508.25

173.09 Total: 0.00

Add C.P & OH @15% except on [A]+[B] i.e on 0.00 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3589.22 Rs 3589.25

Item Code: 19.32.1 Making soakpit 2.5 m dia 3 m deep With FPS bricks Code

02.008.01

02.026.01

2602

0362 0285 0287 1854 2260

DSR-12

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one soak pit Earth work in excavation including disposal of surplus earth 3.14/4x(2.5)^2 x3m = 14.73 cum E/W excavation in foundation trenches .. .. All kinds of soil. 14.73 = 3.14/4x(2.5)^2 x 1.5 m = 7.37 cum Extra for every additional lift of 1.5 m or part thereof in: All kinds of soil. 2nd class bricks perimetre = 4x0.35 =1.40 m Area = 1.40x2.925 m = 4.1 sqm Number of brick = 4.1 x487x0.066 =131.78 Wastage 10%= 13.718 Total= 144.96 Say 145 numbers (Common burnt clay F.P.S (non modular) Bricks of class desig Brickbats = 3.14/4x(1.2)^2 x2.925m =3.33 cum Deduct = 0.45x0.45x2.925 m = 0.59 cum Net qty= 2.74 cum ‘ Brick aggregate 50 to 80 mm nominal size = 3.14x1.50x0.03x2.925 m = 4.13 cum Brick aggregate 40 mm nominal size = 3.14x2.15x0.35x2.925 m =6.91 cum 100 mm diametre S.W. pipes ( 60 cm long) Carriage of brick bats and aggregate (2.74+4.13+6.91) cum = 6.25 sqm

Rate

130.78

7.37

34.58

1000

145.00

2900.00

cum

2.74

325.00

cum

4.13

475.00

cum each

6.91 3.00

500.00 36.00

cum

13.78

95.22

Page 1022 of 2298

2201 9999

05.012

05.022.01

16.008.01

0123 0124 0114 0115

Carriage of bricks 1000 Single matting 2.5x2.5 m = 6.25 sqm L.S. Precast R.C.C.slabs 7.5 cm thick in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 0.45x0.45x0.075 m = 0.02 cum Providing, hoisting and fixing upto floor 5 level precast RCC work in string courses, band Reinforcement @ 80 kg/cum = 0.02x80 =1.6 kg Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi 2nd class brick edging laid length wise with half brick depth. 3.14x2.6 m =8.17 m Brick edging laid lengthwise with half brick depth : With F.P.S. bricks of class designati LABOUR Mason 1st class Mason 2nd class Beldar Coolie

Day Day Day Day

145.00 112.14

233.60 1.49

0.02

5262.12

1.60

56.77

8.17

23.80

0.50 0.50 3.00 3.00

301.00 273.00 247.00 247.00 Total: 10117.84

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E] i.e on 10219.02 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 14323.63 Rs 15228.15

Item Code: 19.33 Constructing soak pit 1.20x 1.20x1.20 m Code

02.008.01

0362 2260

16.008.01 1854 9999

0114 9999

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one soak pit Earth work in excavation including disposal of surplus earth 1.2x1.2x1.2m = 1.73 cum E/W excavation in foundation trenches .. .. All kinds of soil. 1.73 Brick bats 1.2x12x1.2 m = 1.73 cum Carriage of brickbats Second class brick edging laid length wise with half brick depth Brick edging laid lengthwise with half brick depth : With F.P.S. bricks of class designati S.W. pipe 100 mm diameter (60 cm long) Single matting 1.2x1.2 m= 1.44 sqm LABOUR For filling brick bats Beldar Sundries

cum cum

Rate

130.78

1.73 1.73

325.00 95.22

5.20

23.80

each

2.00

36.00

L.S.

25.84

1.49

Day L.S.

0.50 13.50

247.00 1.49 Total: 981.10

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 990.91 Cost for 1.00 No.

DSR-12

Page 1023 of 2298

Rate per Each: Rate as per DSR-12:

Rs 1489.56 Rs 1591.35

Item Code: 19.34.1 P/L S.W. intercepting trap in manholes with stiff mixture of cement mortar 1 : 1. 100 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost of one no. MATERIALS 7128 S.W intercepting trap 100 mm dia each 1.00 9999 Carriage of trap L.S. 1.04 0367 Cement for one joint tonne 0.0013 2209 Carriage of cement tonne 0.0013 0983 Fine sand cum 0.001 2261 Carriage of fine sand cum 0.001 1881 Spun yarn or plain gaskin kilog 0.09 LABOUR 0123 Mason 1st class Day 0.02 0124 Mason 2nd class Day 0.02 0114 Beldar Day 0.06 0101 Bhisti Day 0.02 Add water charges @ 1% on

Rate

170.00 1.49 5000.00 77.87 640.00 87.60 40.00 301.00 273.00 247.00 260.00 Total: 213.98

Add C.P & OH @15% on 216.12 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 248.54 Rs 248.55

Item Code: 19.34.2 P/L S.W. intercepting trap in manholes with stiff mixture of cement mortar 1 : 1. 150 mm dia. Details of Cost for : 1.00 No. Code Description Unit Quantity Details of cost of one no. MATERIALS 7129 S.W. iintercepting trap 150mmdia each 1.00 9999 Carriage of trap L.S. 2.08 0367 Cement for one joint tonne 0.0019 2209 Carriage of cement tonne 0.0019 0983 Fine sand cum 0.0014 2261 Carriage of fine sand cum 0.0014 1881 Spun yarn or plain gaskin kilog 0.18 LABOUR 0123 Mason 1st class Day 0.03 0124 Mason 2nd class Day 0.03 0114 Beldar Day 0.08 0101 Bhisti Day 0.03 Add water charges @ 1% on

Rate

225.00 1.49 5000.00 77.87 640.00 87.60 40.00 301.00 273.00 247.00 260.00 Total: 290.75

Add C.P & OH @15% on 293.66 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 337.71 Rs 337.70

Page 1024 of 2298

Item Code: 20.1.1 Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement concrete: 400 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate MATERIAL Concrete -3.14/4x0.40 x20 = 2.51 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 2.51 5242.17 grade CC for RCC including pumping o 9999 Sundries L.S. 521.08 1.49 7181 C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 M.S. clamps for shoes @ 35 kg per pile kilog 35.00 42.00 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.36 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 LABOUR 0130 Work supervisor (Mistri) Day 0.08 301.00 0114 Beldar Day 2.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 18816.49 Add C.P & OH @15% except on [A] i.e on 19004.65 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1750.66 Rs 1750.65

Item Code: 20.1.2 Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement concrete: 450 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate MATERIAL Concrete -3.14/4x0.45 x20 = 3.18 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 3.18 5242.17 grade CC for RCC including pumping o 9999 Sundries L.S. 392.70 1.49 7181 C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 M.S. clamps for shoes @ 35 kg per pile kilog 35.00 42.00 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.48 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 LABOUR 0130 Work supervisor (Mistri) Day 0.08 301.00 0114 Beldar Day 2.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 22705.20 Add C.P & OH @15% except on [A] i.e on 22932.25 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2152.11 Rs 2152.10

Item Code: 20.1.3

DSR-12

Page 1025 of 2298

Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement concrete: 500 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x0.50^2 x20 = 3.925 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 3.925 5242.17 grade CC for RCC including pumping o 9999 Sundries L.S. 530.00 1.49 7181 C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 M.S. clamps for shoes @ 35 kg per pile kilog 35.00 42.00 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.60 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 LABOUR 0130 Work supervisor (Mistri) Day 0.08 301.00 0114 Beldar Day 2.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 26989.78 Add C.P & OH @15% except on [A] i.e on 27259.68 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2596.21 Rs 2596.20

Item Code: 20.1.4 Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement concrete: 550 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x0.55^2 x20 = 4.75 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 4.75 5242.17 grade CC for RCC including pumping o 9999 Sundries L.S. 371.88 1.49 7181 C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 M.S. clamps for shoes @ 35 kg per pile kilog 35.00 42.00 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.60 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 LABOUR 0130 Work supervisor (Mistri) Day 0.08 301.00 0114 Beldar Day 2.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 26754.18 Add C.P & OH @15% except on [A] i.e on 27021.72 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2798.76 Rs 2798.75

Item Code: 20.1.5 Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement concrete: 750 mm dia. piles.

DSR-12

Page 1026 of 2298

Code

05.033.01 9999 7181 7182 0024 0025 0130 0114

Details of Cost for : 15.00 m Unit Quantity

Description MATERIAL Concrete 3.14/4x0.75^2 x20 = 6.62 cum P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping o Sundries C.I. Shoes @ 80 kg per pile M.S. clamps for shoes @ 35 kg per pile MACHINERY Hire and running charges of hydraulic piling rig with power unit etc. including complete a Hire and running charges of light crane. LABOUR Work supervisor (Mistri) Belder

Rate

Cum

6.62

5242.17

L.S. kilog kilog

573.57 80.00 35.00

1.49 46.00 42.00

per d

0.70

34000.00

per d

0.06

2200.00

Day Day

0.14 3.50

301.00 247.00 Total: 30843.26

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 31151.69 Cost for 15.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4701.84 Rs 3526.35

Item Code: 20.1.6 Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement concrete: 1000 mm dia. piles. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x1.00^2 x10 = 7.85 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 7.85 5242.17 grade CC for RCC including pumping o 9999 Sundries L.S. 897.89 1.49 7181 C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 M.S. clamps for shoes @ 35 kg per pile kilog 35.00 42.00 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.68 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 LABOUR 0130 Work supervisor (Mistri) Day 0.16 301.00 0114 Beldar Day 4.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 30776.02 Add C.P & OH @15% except on [A] i.e on 31083.78 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 7689.74 Rs 7689.70

Item Code: 20.1.7 Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement concrete: 1200 mm dia. piles. Details of Cost for : 9.00 m Code Description Unit Quantity Rate

DSR-12

Page 1027 of 2298

05.033.01 9999 7181 7182 0024 0025 0130 0114

MATERIAL Concrete 3.14/4x1.2^2 x9 =10.17cum P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping o Sundries a) C.I. Shoes @ 80 kg per pile b) M.S. clamps for shoes @ 35 kg per pile MACHINERY Hire and running charges of hydraulic piling rig with power unit etc. including complete a Hire and running charges of light crane. LABOUR Work supervisor (Mistri) Beldar

Cum

10.17

5242.17

L.S. kilog kilog

733.37 80.00 35.00

1.49 46.00 42.00

per d

0.67

34000.00

per d

0.06

2200.00

Day Day

0.18 4.50

301.00 247.00 Total: 30320.40

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 30623.60 Cost for 9.00 m Rate per One Metre: Rate as per DSR-12:

Rs 9836.67 Rs 9836.65

Item Code: 20.1.8 Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement concrete: 1200 mm dia. piles. Details of Cost for : 9.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x1.5^2 x9 =15.90 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 15.90 5242.17 grade CC for RCC including pumping o 9999 Sundries L.S. 1113.48 1.49 7181 (a) C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 (b) M.S. clamps for shoes® 35 kg per pile kilog 35.00 42.00 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.77 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.10 2200.00 LABOUR 0130 Work supervisor (Mistri) Day 0.20 301.00 0114 Beldar Day 5.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 34504.29 Add C.P & OH @15% except on [A] i.e on 34849.33 Cost for 9.00 m Rate per One Metre: Rate as per DSR-12:

Rs 13714.14 Rs 13714.35

Item Code: 20.2.1 Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement concrete: 300 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x0.30^2 x20 = 1.41 cum

DSR-12

Page 1028 of 2298

05.033.01 7183 9999 0024 0025 0026 0018 0017 0130 0114

P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping o Bentonite. Sundries MACHINERY Hire and running charges of hydraulic piling rig with power unit etc. including complete a Hire and running charges of light crane. Hire and running charges of bentonite pump. Hire and running charges of loader. Hire and running charges of tipper LABOUR Work supervisor (Mistri) Beldar

Cum

1.41

5242.17

tonne L.S.

0.16 289.85

3100.00 1.49

per d

0.36

34000.00

per d per d Day Day

0.06 0.38 0.30 0.30

2200.00 4200.00 5000.00 1700.00

Day Day

0.12 2.00

301.00 247.00 Total: 17436.00

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 17610.36 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1382.17 Rs 1382.15

Item Code: 20.2.2 Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement concrete: 400 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x0.40^2 x20 = 2.51 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 2.51 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.225 3100.00 9999 Sundries L.S. 79.06 1.49 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.36 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 0026 Hire and running charges of bentonite pump. per d 0.38 4200.00 0018 Hire and running charges of loader. Day 0.30 5000.00 0017 Hire and running charges of tipper Day 0.30 1700.00 LABOUR 0130 Work supervisor (Mistri) Day 0.12 301.00 0114 Beldar Day 2.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 17323.42 Add C.P & OH @15% except on [A] i.e on 17496.65 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1663.95 Rs 1613.95

Item Code: 20.2.3 Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement concrete: 450 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate

DSR-12

Page 1029 of 2298

05.033.01 7183 9999 0024 0025 0026 0018 0017 0130 0114

MATERIAL Concrete 3.14/4x0.45^2 x20 = 3.18 cum P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping o Bentonite Sundries MACHINERY Hire and running charges of hydraulic piling rig with power unit etc. including complete a Hire and running charges of light crane. Hire and running charges of bentonite pump. Hire and running charges of loader. Hire and running charges of tipper LABOUR Work supervisor (Mistri) Beldar

Cum

3.18

5242.17

tonne L.S.

0.25 230.69

3100.00 1.49

per d

0.47

34000.00

per d per d Day Day

0.63 0.38 0.30 0.30

2200.00 4200.00 5000.00 1700.00

Day Day

0.12 2.50

301.00 247.00 Total: 22744.35

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 22971.79 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2154.38 Rs 2154.40

Item Code: 20.2.4 Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement concrete: 500 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x0.50^2 x20= 3.925 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 3.925 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.28 3100.00 9999 Sundries L.S. 87.95 1.49 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.60 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 0026 Hire and running charges of bentonite pump. per d 0.38 4200.00 0017 Hire and running charges of tipper Day 0.30 1700.00 0018 Hire and running charges of loader. Day 0.30 5000.00 LABOUR 0130 Work supervisor (Mistri) Day 0.12 301.00 0114 Beldar Day 2.50 247.00 Total: Add water charges @ 1% except on [A] i.e on 25790.67 Add C.P & OH @15% except on [A] i.e on 26048.58 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2526.57 Rs 2526.55

Item Code: 20.2.5 Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement concrete: 600 mm dia. piles.

DSR-12

Page 1030 of 2298

Code

05.033.01 7183 9999 0024 0025 0026 0017 0018 0130 0114

Details of Cost for : 20.00 m Unit Quantity

Description MATERIAL Concrete 3.14/4x0.60^2 x20= 5.65 cum P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping o Bentonite Sundries MACHINERY Hire and running charges of hydraulic piling rig with power unit etc. including complete a Hire and running charges of light crane. Hire and running charges of bentonite pump. Hire and running charges of tipper Hire and running charges of loader. LABOUR Work supervisor (Mistri) Beldar

Cum

Rate

5.65

5242.17

tonne L.S.

0.33 317.43

3100.00 1.49

per d

0.75

34000.00

per d per d Day Day

0.06 0.38 0.30 0.30

2200.00 4200.00 1700.00 5000.00

Day Day

0.12 3.00

301.00 247.00 Total: 31511.09

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 31826.20 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3310.92 Rs 3310.90

Item Code: 20.2.6 Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement concrete: 750 mm dia. piles. Details of Cost for : 15.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x0.75^2 xl5 = 6.62 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 6.62 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.30 3100.00 9999 Sundries L.S. 131.58 1.49 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.70 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 0026 Hire and running charges of bentonite pump. per d 0.75 4200.00 0017 Hire and running charges of tipper Day 0.30 1700.00 0018 Hire and running charges of loader. Day 0.30 5000.00 LABOUR 0130 Work supervisor (Mistri) Day 0.14 301.00 0114 Beldar Day 3.50 247.00 Total: Add water charges @ 1% except on [A] i.e on 31124.69 Add C.P & OH @15% except on [A] i.e on 31435.94 Cost for 15.00 m Rate per One Metre: Rate as per DSR-12:

Rs 4723.63 Rs 4723.60

Item Code: 20.2.7

DSR-12

Page 1031 of 2298

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement concrete: 1000 mm dia. piles. Details of Cost for : 10.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x1.00^2 x10 = 7.85 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 7.85 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.35 3100.00 9999 Sundries L.S. 175.89 1.49 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.69 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 0026 Hire and running charges of bentonite pump. per d 0.75 4200.00 0017 Hire and running charges of tipper Day 0.40 1700.00 0018 Hire and running charges of loader. Day 0.40 5000.00 LABOUR 0130 Work supervisor (Mistri) Day 0.16 301.00 0114 Beldar Day 4.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 31805.24 Add C.P & OH @15% except on [A] i.e on 32123.29 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 7809.28 Rs 7809.25

Item Code: 20.2.8 Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement concrete: 1200 mm dia. piles. Details of Cost for : 9.00 m Code Description Unit Quantity Rate MATERIAL Concrete 3.14/4x1.20^2 x9 =10.17 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 10.17 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.385 3100.00 9999 Sundries L.S. 290.79 1.49 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.67 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 2200.00 0026 Hire and running charges of bentonite pump. per d 0.75 4200.00 0017 Hire and running charges of tipper Day 0.50 1700.00 0018 Hire and running charges of loader. Day 0.50 5000.00 LABOUR 0130 Work supervisor (Mistri) Day 0.18 301.00 0114 Beldar Day 4.50 247.00 Total: Add water charges @ 1% except on [A] i.e on 32204.46 Add C.P & OH @15% except on [A] i.e on 32526.50 Cost for 9.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 10079.82 Rs 10079.80

Page 1032 of 2298

Item Code: 20.2.9 Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement concrete: 1500 mm dia. piles. Details of Cost for : 9.00 m Code Description Unit Quantity Rate Details of cost for 9 m length of pile MATERIAL Concrete 3.14/4x1.50^2 x9 = 15.90 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 15.90 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.45 3100.00 9999 Sundries L.S. 593.48 1.49 MACHINERY 0024 Hire and running charges of hydraulic piling per d 0.77 34000.00 rig with power unit etc. including complete accessories and shifting at site. 0025 Hire and running charges of light crane. per d 0.10 2200.00 0026 Hire and running charges of bentonite pump. per d 0.96 4200.00 0017 Hire and running charges of tipper Day 0.75 1700.00 0018 Hire and running charges of loader. Day 0.75 5000.00 LABOUR 0130 Work supervisor (Mistri) Day 0.25 301.00 0114 Beldar Day 5.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 39046.54 Add C.P & OH @15% except on [A] i.e on 39437.01 Cost for 9.00 m Rate per One Metre: Rate as per DSR-12:

Rs 14300.34 Rs 14300.30

Item Code: 20.3.1 Boring, Providing and install- ing cast in situ single under reamed piles of specified dia. and length below concrete: 300 mm dia. piles. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIAL R.C.C Stem -3.14/4x(0.30)^2 x9.625 = 0.680 cum Bulb -3.14/4x(0.75)^2 x0.075 = 0.033 cum 2x 3.14/4x(0.525)^2 x0.150 = 0.065 cum =0.778 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 0.778 grade CC for RCC including pumping o 7183 Bentonite tonne 0.08 9999 Sundries L.S. 410.92 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.36 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.03 0026 Hire and running charges of bentonite pump. per d 0.02 LABOUR 0130 Work supervisor (Mistri) Day 0.08 0114 Beldar Day 2.00 Add water charges @ 1% except on [A] i.e on

DSR-12

pile cap M-35in cement

Rate

5242.17 3100.00 1.49 34000.00 2200.00 4200.00 301.00 247.00 Total: 13768.35

Page 1033 of 2298

Add C.P & OH @15% except on [A] i.e on 13906.03 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2007.03 Rs 2007.05

Item Code: 20.3.2 Boring, Providing and install- ing cast in situ single under reamed piles of specified dia. and length below concrete: 400 mm dia piles. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIAL R.C.C Stem -3.14/4x(0.40)^2 x9.30 = 1.169 cum Bulb -3.14/4x(1.00)^2 x0.1 = 0.079 cum 2x 3.14/4x(0.7)^2 x0.30 = 0.23 cum = 1.478 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 1.478 grade CC for RCC including pumping o 7183 Bentonite tonne 0.15 9999 Sundries L.S. 276.82 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.36 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 0026 Hire and running charges of bentonite pump. per d 0.02 LABOUR 0130 Work supervisor (Mistri) Day 0.08 0114 Beldar Day 2.00 Add water charges @ 1% except on [A] i.e on

pile cap M-35in cement

Rate

5242.17 3100.00 1.49 34000.00 2200.00 4200.00 301.00 247.00 Total: 13851.54

Add C.P & OH @15% except on [A] i.e on 13990.06 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2383.65 Rs 2383.65

Item Code: 20.3.3 Boring, Providing and install- ing cast in situ single under reamed piles of specified dia. and length below concrete: 450 mm dia piles. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIAL R.C.C Stem -3.14/4x(0.45)^2 x9.212 = 1.465 cum Bulb -3.14/4x(1.125)^2 x0.113 = 0.112 cum 2x 3.14/4x(0.788)^2 x0.337 =0.329 cum = 1.906 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 1.906 grade CC for RCC including pumping o 7183 Bentonite tonne 0.19 9999 Sundries L.S. 194.81 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.36 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 0026 Hire and running charges of bentonite pump. per d 0.02

DSR-12

pile cap M-35in cement

Rate

5242.17 3100.00 1.49 34000.00 2200.00 4200.00

Page 1034 of 2298

0130 0114

LABOUR Work supervisor (Mistri) Beldar

Day Day

0.08 2.00

Add water charges @ 1% except on [A] i.e on

301.00 247.00 Total: 13853.35

Add C.P & OH @15% except on [A] i.e on 13991.88 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2608.22 Rs 2608.20

Item Code: 20.3.4 Boring, Providing and install- ing cast in situ single under reamed piles of specified dia. and length below concrete: 550 mm dia pils. Details of Cost for : 10.00 m Code Description Unit Quantity MATERIAL R.C.C Stem -3.14/4x(0.50)^2 x9.125 = 1.792 cum Bulb -3.14/4x(1.25)^2 x0.125 = 0.153 cum 2x 3.14/4x(0.875)^2 x0.375 = 0.451 cum = 2.396 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 2.40 grade CC for RCC including pumping o 7183 Bentonite tonne 0.20 9999 Sundries L.S. 208.15 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.36 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.06 0026 Hire and running charges of bentonite pump. per d 0.02 LABOUR 0130 Work supervisor (Mistri) Day 0.08 0114 Beldar Day 2.00 Add water charges @ 1% except on [A] i.e on

pile cap M-35in cement

Rate

5242.17 3100.00 1.49 34000.00 2200.00 4200.00 301.00 247.00 Total: 13904.22

Add C.P & OH @15% except on [A] i.e on 14043.26 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2873.10 Rs 2873.00

Item Code: 20.4.1 Extra over item No. 20.3 for providing additional bulb in under reamed piles, under spe- -cified dia. (only the qnty of extra bulbs are to be paid): 300 mm dia. piles. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 bulb. Materials : Bulb - 0.033 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 0.033 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.003 3100.00 Machinery 0024 Hire and running charges of hydraulic piling per d 0.02 34000.00 rig with power unit etc. including complete

DSR-12

Page 1035 of 2298

0025 0026 0130 0114

accessories and shifting at site. Hire and running charges of light crane. Hire and running charges of bentonite pump. Labour Work supervisior (Mistry) Beldar

per d per d

0.01 0.01

2200.00 4200.00

Day Day

0.02 1.00

301.00 247.00 Total: 1006.32

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1016.38 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1341.83 Rs 1341.85

Item Code: 20.4.2 Extra over item No. 20.3 for providing additional bulb in under reamed piles, under spe- -cified dia. (only the qnty of extra bulbs are to be paid): 400 mm dia. piles. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 bulb. MATERIALS: Bulb - 0.063 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 0.063 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.006 3100.00 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.02 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.01 2200.00 0026 Hire and running charges of bentonite pump. per d 0.01 4200.00 LABOUR 0130 Work supervisior (Mistry) Day 0.02 301.00 0114 Beldar Day 1.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 1015.62 Add C.P & OH @15% except on [A] i.e on 1025.78 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1509.91 Rs 1509.90

Item Code: 20.4.3 Extra over item No. 20.3 for providing additional bulb in under reamed piles, under spe- -cified dia. (only the qnty of extra bulbs are to be paid): 450 mm dia. piles. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 bulb : Bulb-0.081 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 0.081 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.008 3100.00 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.02 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.01 2200.00 0026 Hire and running charges of bentonite pump. per d 0.01 4200.00

DSR-12

Page 1036 of 2298

0130 0114

LABOUR Work supervisior (Mistry) Beldar

Day Day

0.02 1.00

Add water charges @ 1% except on [A] i.e on

301.00 247.00 Total: 1021.82

Add C.P & OH @15% except on [A] i.e on 1032.04 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1611.47 Rs 1611.45

Item Code: 20.4.4 Extra over item No. 20.3 for providing additional bulb in under reamed piles, under spe- -cified dia. (only the qnty of extra bulbs are to be paid): 550 mm dia. piles. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for 1 bulb. MATERIALS : Bulb-0.102 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 0.102 5242.17 grade CC for RCC including pumping o 7183 Bentonite tonne 0.01 3100.00 MACHINERY 0024 Hire and running charges of hydraulic piling rig with power per d 0.02 34000.00 unit etc. including complete a 0025 Hire and running charges of light crane. per d 0.01 2200.00 0026 Hire and running charges of bentonite pump. per d 0.02 4200.00 LABOUR 0130 Work supervisior (Mistry) Day 0.02 301.00 0114 Beldar Day 1.00 247.00 Total: Add water charges @ 1% except on [A] i.e on 1070.02 Add C.P & OH @15% except on [A] i.e on 1080.72 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1777.53 Rs 1776.55

Item Code: 20.5.1 3roviding, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement concrete : 400 mm dia. Details of Cost for : 20.00 m Code Description Unit Quantity Rate MATERIAL Concrete -3.14/4x(0.40)^2 x20 = 2.51 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 2.51 5242.17 grade CC for RCC including pumping o 05.019 Encasing rolled steel sections in beams and columns, with CC 2.51 7259.06 1:2:4 05.001.03 P/L specified grade of RCC excluding centering, shuttering, -2.51 4703.91 finishing and reinforcement 03.007 Cement mortar 1:2 (1 cement : 2 coarse) 0.025 4863.86 9999 Sundries L.S. 442.00 1.49 7181 C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 M.S. shoes® 35 kg per pile kilog 35.00 42.00 MACHINERY

DSR-12

Page 1037 of 2298

0027 0028 0130 0114

Hire and running charges of vibrating pile driving hammer per d complete with power unit and acc Hire and running charges of crane 20 tonne capacity. per d LABOUR Work supervisor (Mistri) Day Beldar Day

0.38

35000.00

0.06

9250.00

0.12 3.00

301.00 247.00 Total: 20562.30

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 20767.92 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2172.72 Rs 2172.30

Item Code: 20.5.2 Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement concrete : 450 mm dia. Details of Cost for : 20.00 m Code Description Unit Quantity Rate Details of cost for 20 m length of pile MATERIAL Concrete -3.14/4x(0.45)^2 x20 = 3.18 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 3.18 5242.17 grade CC for RCC including pumping o 05.019 Encasing rolled steel sections in beams and columns, with CC 3.18 7259.06 1:2:4 05.001.03 P/L specified grade of RCC excluding centering, shuttering, -3.18 4703.91 finishing and reinforcement 03.007 Cement mortar 1:2 (1 cement : 2 coarse) 0.025 4863.86 Rate as per item no. 3.7 9999 Wooden block @ 1 block per two piles L.S. 442.00 1.49 Pile shoes 7181 C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 M.S. shoes @ 35 kg per pile kilog 35.00 42.00 MACHINERY 0027 Hire and running charges of vibrating pile driving hammer per d 0.38 35000.00 complete with power unit and acc 0028 Hire and running charges of crane 20 tonne capacity. per d 0.06 9250.00 LABOUR 0130 Work supervisor (Mistri) Day 1.08 301.00 0114 Beldar Day 10.78 247.00 Total: Add water charges @ 1% except on [A]+[B]+[C] i.e on 22772.92 Add C.P & OH @15% except on [A]+[B]+[C] i.e on 23000.65 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2562.31 Rs 2562.40

Item Code: 20.5.3 Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement concrete : 500 mm dia. Details of Cost for : 20.00 m Code Description Unit Quantity Rate Details of cost for 20 m length of pile MATERIAL

DSR-12

Page 1038 of 2298

05.033.01 05.019 05.001.03 03.007 9999 7181 7182 0027 0028 0130 0114

Concrete -3.14/4x(0.50)^2 x20 = 3.925 cum P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping o Encasing rolled steel sections in beams and columns, with CC 1:2:4 P/L specified grade of RCC excluding centering, shuttering, finishing and reinforcement Cement mortar 1:2 (1 cement : 2 coarse) (Rate as per item no. 3.7) Wooden block @ 1 block per two piles Pile shoes C.I. Shoes @ 80 kg per pile M.S. shoes @ 35 kg per pile MACHINERY Hire and running charges of vibrating pile driving hammer complete with power unit and acc Hire and running charges of crane 20 tonne capacity. LABOUR Work supervisor (Mistri) Beldar

Cum

3.925

5242.17

3.925

7259.06

-3.925

4703.91

0.025

4863.86

L.S.

442.00

1.49

kilog kilog

80.00 35.00

46.00 42.00

per d

0.38

35000.00

per d

0.06

9250.00

Day Day

0.12 3.00

301.00 247.00 Total: 20562.30

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 20767.92 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 2724.38 Rs 2724.50

Item Code: 20.5.4 Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement concrete : 550 mm dia. Details of Cost for : 20.00 m Code Description Unit Quantity Rate Details of cost for 20 m length of pile MATERIAL Concrete -3.14/4x(0.55)^2 x20 = 4.75 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 4.75 5242.17 grade CC for RCC including pumping o 05.019 Encasing rolled steel sections in beams and columns, with CC 4.75 7259.06 1:2:4 05.001.03 P/L specified grade of RCC excluding centering, shuttering, -4.75 4703.91 finishing and reinforcement 03.007 Cement mortar 1:2 (1 cement : 2 coarse) 0.025 4863.86 (Rate as per item no. 3.7) 9999 Wooden block @ 1 block per two piles L.S. 442.00 1.49 Pile shoes 7181 C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 M.S. shoes @ 35 kg per pile kilog 35.00 42.00 MACHINERY 0027 Hire and running charges of vibrating pile driving hammer per d 0.38 35000.00 complete with power unit and acc 0028 Hire and running charges of crane 20 tonne capacity. per d 0.06 9250.00 LABOUR 0130 Work supervisor (Mistri) Day 0.12 301.00 0114 Beldar Day 3.00 247.00 Total: Add water charges @ 1% except on [A]+[B]+[C] i.e on 20562.30

DSR-12

Page 1039 of 2298

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 20767.92 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 3046.02 Rs 3007.90

Item Code: 20.5.5 Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement concrete : 750 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate Details of cost for 20 m length of pile MATERIAL Concrete -3.14/4x(0.75)^2 x20 = 10.88 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 10.88 5242.17 grade CC for RCC including pumping o 05.019 Encasing rolled steel sections in beams and columns, with CC 10.88 7259.06 1:2:4 05.001.03 P/L specified grade of RCC excluding centering, shuttering, -10.88 4703.91 finishing and reinforcement 03.007 Cement mortar 1:2 (1 cement : 2 coarse) 0.025 4863.86 Rate as per item no. 3.7 9999 Wooden block @ 1 block per two piles L.S. 442.00 1.49 Pile shoes 7181 C.I. Shoes @ 80 kg per pile kilog 80.00 46.00 7182 M.S. shoes @ 35 kg per pile kilog 35.00 42.00 MACHINERY 0027 Hire and running charges of vibrating pile driving hammer per d 0.38 35000.00 complete with power unit and acc 0028 Hire and running charges of crane 20 tonne capacity. per d 0.06 9250.00 LABOUR 0130 Work supervisor (Mistri) Day 0.12 301.00 0114 Beldar Day 3.00 247.00 Total: Add water charges @ 1% except on [A]+[B]+[C] i.e on 20562.30 Add C.P & OH @15% except on [A]+[B]+[C] i.e on 20767.92 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 5435.90 Rs 5436.20

Item Code: 20.5.6 Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement concrete : 1000 mm dia. piles. Details of Cost for : 20.00 m Code Description Unit Quantity Rate Details of cost for 20 m length of pile MATERIAL Concrete -3.14/4x(1.00)2x20 =15.70 cum 05.033.01 P/L machine batched and machine mixed design mix M-25 Cum 15.70 5242.17 grade CC for RCC including pumping o 05.019 Encasing rolled steel sections in beams and columns, with CC 15.70 7259.06 1:2:4 05.001.03 P/L specified grade of RCC excluding centering, shuttering, -15.70 4703.91 finishing and reinforcement 03.007 Cement mortar 1:2 (1 cement : 2 coarse) 0.025 4863.86 Rate as per item no. 3.7

DSR-12

Page 1040 of 2298

9999 7181 7182 0027 0028 0130 0114

Wooden block @ 1 block per two piles L.S. Pile shoes C.I. Shoes @ 80 kg per pile kilog M.S. shoes @ 35 kg per pile kilog MACHINERY Hire and running charges of vibrating pile driving hammer per d complete with power unit and acc Hire and running charges of crane 20 tonne capacity. per d LABOUR Work supervisor (Mistri) Day Beldar Day

442.00

1.49

80.00 35.00

46.00 42.00

0.38

35000.00

0.06

9250.00

0.12 3.00

301.00 247.00 Total: 20562.30

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on 20767.92 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 7315.05 Rs 7315.50

Item Code: 20.6.1.1 Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Single pile rate per test for initial test: Upto 50 ton capacity pile.

Code 7246

Description Cost per test

Details of Cost for : 1.00 Nos Unit Quantity per t 1.00 Add water charges @ 1% on

Rate 33200.00 Total: 33200.00

Add C.P & OH @15% on 33532.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 38561.80 Rs 38561.80

Item Code: 20.6.1.2 Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Single pile rate per test for initial test: Above 50 and upto 100 tonne capacity pile. Details of Cost for : 1.00 Nos Code Description Unit Quantity Rate 7249 Cyclic verticle load testing of piles in accordance with IS : 2911 per t 1.00 15000.00 (Part-IV) including pr Total: Add water charges @ 1% on 15000.00 Add C.P & OH @15% on 15150.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 17422.50 Rs 17422.50

Item Code: 20.6.2.1 Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Single pile rate per test for routine test: Upto 50 tonne capacity pile. Details of Cost for : 1.00 Nos Code Description Unit Quantity Rate 7247 Cost per test per t 1.00 40300.00

DSR-12

Page 1041 of 2298

Add water charges @ 1% on

Total: 40300.00

Add C.P & OH @15% on 40703.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 46808.45 Rs 46808.45

Item Code: 20.6.2.2 Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Single pile rate per test for routine test: Above 50 and upto 100 tonne capacity pile routine test. Details of Cost for : 1.00 Nos Code Description Unit Quantity Rate Details of cost for 1 test 7250 Cyclic verticle load testing of piles in per t 1.00 23000.00 accordance with IS : 2911 (Part-IV) including prepration of pile head etc. forSingle pile above 50 tonne capacity pile and upto 100 tonne capacity pile Total: Add water charges @ 1% on 23000.00 Add C.P & OH @15% on 23230.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 26714.50 Rs 26714.50

Item Code: 20.6.3.1 Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Group of two or more piles. Upto 50 tonne capacity rate per test for initial test. Details of Cost for : 1.00 Nos Code Description Unit Quantity Rate Details of cost for 1 test 7248 Cost per test per t 1.00 48500.00 Total: Add water charges @ 1% on 48500.00 Add C.P & OH @15% on 48985.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 56332.75 Rs 56332.80

Item Code: 20.6.3.2 Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Group of two or more piles. Upto 50 tonne capacity rate for test for routine test. Details of Cost for : 1.00 Nos Code Description Unit Quantity Rate Details of cost for 1 test 7251 Cost per test per t 1.00 29500.00 Total: Add water charges @ 1% on 29500.00 Add C.P & OH @15% on 29795.00 Cost for 1.00 Nos

DSR-12

Page 1042 of 2298

Rate per Per Test: Rate as per DSR-12:

Rs 34264.25 Rs 34264.20

Item Code: 20.7.1.1 Cyclic vertical load testing of pile: Single pile. Upto 50 ton capacity pile. Code 7249

Description Details of cost for 1 test cost per test

Details of Cost for : 1.00 Nos Unit Quantity per t

1.00

Add water charges @ 1% on

Rate 15000.00 Total: 15000.00

Add C.P & OH @15% on 15150.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 17422.50 Rs 17422.50

Item Code: 20.7.1.2 Cyclic vertical load testing of pile: Single pile. Above 50 and upto 100 tonne capacity pile. Details of Cost for : 1.00 Nos Code Description Unit Quantity Details of cost for 1 test 7250 Cyclic verticle load testing of piles in per t 1.00 accordance with IS : 2911 (Part-IV) including prepration of pile head etc. forSingle pile above 50 tonne capacity pile and upto 100 tonne capacity pile Add water charges @ 1% on

Rate 23000.00

Total: 23000.00

Add C.P & OH @15% on 23230.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 26714.50 Rs 26714.50

Item Code: 20.7.2.1 Cyclic vertical load testing of pile: Group of two piles. Upto 50 tonne capacity each. Details of Cost for : 1.00 Nos Code Description Unit Quantity Details of cost for 1 test 7251 Cost per test per t 1.00 Add water charges @ 1% on

Rate 29500.00 Total: 29500.00

Add C.P & OH @15% on 29795.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 34264.25 Rs 34264.20

Item Code: 20.8.1 Lateral load testing of single pile . Upto 50 tonne capacity pile. Details of Cost for : 1.00 Nos

DSR-12

Page 1043 of 2298

Code 7252

Description Details of cost for 1 test Cost per test

Unit

Quantity

Rate

per t

1.00

15000.00 Total: 15000.00

Add water charges @ 1% on

Add C.P & OH @15% on 15150.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 17422.50 Rs 17422.50

Item Code: 20.8.2 Lateral load testing of single pile . Above 50 and upto 100 tonne capacity piles. Details of Cost for : 1.00 Nos Code Description Unit Quantity Details of cost for 1 test 7253 Cost per test per t 1.00 Add water charges @ 1% on

Rate 23500.00 Total: 23500.00

Add C.P & OH @15% on 23735.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 27295.25 Rs 27295.20

Item Code: 20.9 Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 ....

Code

0081 0160 0161 9999 9999

Description Details of cost for one pit test (Ten pits in one day) MATERIALS: Pile Integrity testing equipment LABOUR: Technician Helper (technician) Miscellaneous Reporting charges Transportation and consumables etc.,

Details of Cost for : 1.00 Nos Unit Quantity

Rate

days

0.10

3000.00

days days

0.10 0.10

700.00 300.00

100.67 33.56

1.49 1.49 Total: 600.00

L.S. L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 606.00 Cost for 1.00 Nos Rate per Per Test: Rate as per DSR-12:

Rs 696.90 Rs 696.90

Item Code: 21.1.1.1 P/F aluminium work in doors, windows, partitions etc - Fixed - Anodised aluminium work Details of Cost for : 40.02 Kg Code Description Unit Quantity Details of cost for 40.02 kg MATERIAL : Aluminium Section

DSR-12

Rate

Page 1044 of 2298

(i) External member of the frame (Jindal section no 4605) V = 2x2.40 = 4.80 m H = 2x3x0.95 = 5.70 m = 10.50 m @ 1.653 kg/m = 17.36 kg (ii) Internal member of the frame (Jindal section no 4604)

7306 0589 7389 9999

0116 0139 0114 0100 9999

V = 2x2.40 = 4.80 m H = 1x3x0.95 = 2.85 m = 7.65 m @ 1.692 kg/m = 12.94 kg (iii) Aluminium snap beading on both side (Jindal section no 4407) 2x6x2 (1.14+0.95) = 50.16 m Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg (iv) Angle cleat 38x38x4.8 mm 50 mm long 18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg Sub total =40.02 kg Add 5% wastage = 2.00 kg Total = 42.02 kg kilog (v) C.P. brass /stainless steel screws 20 mm 100 N for cleat angle 18x4 = 72 nos (vii) Anodising kilog (viii) Carriage of material L.S. LABOUR For fabrication of frame Fitter Day Beldar (Special) Day Beldar Day Bandhani Day Labour for drilling holes, hire charges of drill, L.S.

42.02 72.00

220.00 100.00

42.02 52.00

40.00 1.49

2.00 1.00 1.00 0.05 100.00

301.00 260.00 247.00 260.00 1.49 Total: 12345.68

Add water charges @ 1% on

Add C.P & OH @15% on 12469.14 Cost for 40.02 Kg Rate per One Kg: Rate as per DSR-12:

Rs 358.31 Rs 358.45

Item Code: 21.1.1.2 P/F aluminium work for doors, windows, ventilators and partitions etc as per architectural drawings and the directions of Engineerin-charge. : For fixed portion Powder coated aluminium

Code

Description

Details of Cost for : 40.02 Kg Unit Quantity

Rate

MATERIALS: Aluminium Section (i) External member of the frame (Jindal section no 4605) V= 2x2.40 = 4.80 m H = 2x3x0.95 = 5.70 m = 10.50 m @ 1.653 kg/m = 17.36 kg (ii) Internal member of the frame (Jindal 'section no 4604) V- 2x2.40 = 4.80 m H= 1x3x0.95= 2.85 m = 7.65 m @ 1.692 kg/m = 12.94 kg (iii) Aluminium snap beading on both side (Jindal section no 4407)

DSR-12

Page 1045 of 2298

2x6x2 (1.14+0.95) = 50.16 m Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg (iv) Angle cleat 38x38x4.8 mm 50 mm long 18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg Sub total =40.02 kg Add 5% wastage = 2.00 kg Total = 42.02 kg

7306 0589

Aluminium Sections for partions, door, windows CP brass / Stainless steel screws - 20mm for cleat angle 18x4 = 72 nos

kilog 100 N

42.02 72.00

220.00 100.00

7392 9999

Powder coating 50 microns on aluminium sections (viii) Carriage of material

kilog

42.02

64.00

L.S.

52.00

1.49

Day Day Day Day

2.00 1.00 1.00 0.05

301.00 260.00 247.00 260.00

L.S.

100.00

1.49 Total: 13354.16

LABOUR: For fabrication of frame 0116 0139 0114 0100 9999

Fitter grade-I Skilled Beldar Beldar Bandhani Labour for drilling holes, hire charges of drill,

Add water charges @ 1% on

Add C.P & OH @15% on 13487.70 Cost for 40.02 Kg Rate per One Kg: Rate as per DSR-12:

Rs 387.58 Rs 387.70

Item Code: 21.1.1.3 P/F aluminium work in doors, windows, partitions etc - Fixed - Anodised aluminium work : Polyester Powder coated aluminium

Code

Description

Details of Cost for : 40.02 Kg Unit Quantity

Rate

Aluminium Section (i) External member of the frame (Jindal section no 4605) V= 2x2.40 = 4.80 m H = 2x3x0.95 = 5.70 m = 10.50 m @ 1.653 kg/m = 17.36 kg (ii) Internal member of the frame (Jindal section no 4604)

7306

DSR-12

V= 2x2.40 = 4.80 m H= 1x3x0.95= 2.85 m = 7.65 m @ 1.692 kg/m = 12.94 kg (iii) Aluminium snap beading on both side (Jindal section no 4407) 2x6x2 (1.14+0.95) = 50.16 m Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg (iv) Angle cleat 38x38x4.8 mm 50 mm long 18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg Sub total =40.02 kg Add 5% wastage = 2.00 kg Total = 42.02 kg

kilog

42.02

220.00

Page 1046 of 2298

0589 7393 9999

0116 0139 0114 0100 9999

(v) C.P. brass /stainless steel screws 20 mm for cleat angle 18x4 = 72 nos Polyester powder coating 50 microns on aluminium sections

100 N

72.00

100.00

kilog

42.02

70.00

(viii) Carriage of material LABOUR For fabrication of frame Fitter Beldar (Special) Beldar Bandhani Labour for drilling holes, hire charges of drill,

L.S.

52.00

1.49

Day Day Day Day L.S.

2.00 1.00 1.00 0.05 100.00

301.00 260.00 247.00 260.00 1.49 Total: 13606.28

Add water charges @ 1% on

Add C.P & OH @15% on 13742.34 Cost for 40.02 Kg Rate per One Kg: Rate as per DSR-12:

Rs 394.89 Rs 395.00

Item Code: 21.1.2.1 P/F aluminium work for doors, windows, partitions etc - Shutters - Anodised aluminium Details of Cost for : 20.21 Kg Code Description Unit Quantity MATERIAL (i) Hanging style (Jindal section no 4524) 1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg (ii) Meeting style (Jindal section no 4526) 1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg (iii) Top & bottom rail (Jindal section no 4510) 2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg (iv) Lock rail (Jindal section no 4524) 1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg (v) Glazing plate (Jindal section no 440) on one side of lock rail

7306 0689

0589 7389 9999 7390

DSR-12

1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg (vi) Aluminium snap beading (Jindal section no 4497) on both side 2x2 (0.75+1.26) = 8.04 m 2x2 (0.75+0.81) = 6.24 m = 14.28 m @ 0.176 kg/m = 2.51 kg (vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long 3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg Sub total = 20.62 kg Add 5% wastage = 1.03 kg Total = 21.65 kg (viii) Aluminium hinges 100x75x4 mm (ix) C.P. brass /stainless steel screws 20 mm For cleat 12x4 = 48 For cleat 4x8 = 32 For glazing plate @ 15 cm centre to centre in 75 cm length 2x6 = 12 Total = 92 nos (x) Anodising AC 15 (xi) Carriage of material (xii) Neoprene/ PVC gasket in groove of meeting style LABOUR

Rate

kilog 10 No

21.65 4.00

220.00 500.00

100 N kilog L.S. metre

92.00 21.65 31.20 2.35

100.00 40.00 1.49 25.00

Page 1047 of 2298

0116 0139 0114 0100 0111 0114 9999

For fabrication Fitter Beldar (Special) Beldar Bandhani For fixing the shutter including hinges : Carpenter 1 st class Beldar Labour for making provision for fittings and

Day Day Day Day

1.00 1.00 0.50 0.40

301.00 260.00 247.00 260.00

Day Day L.S.

0.20 0.50 50.00

301.00 247.00 1.49 Total: 7072.94

Add water charges @ 1% on

Add C.P & OH @15% on 7143.67 Cost for 20.21 Kg Rate per One Kg: Rate as per DSR-12:

Rs 406.49 Rs 406.50

Item Code: 21.1.2.2 P/F aluminium work for doors, windows, ventilators and partitions as per architectural drawings - : For shutters of doors, windows & ventilators- Powder coated aluminium Details of Cost for : 20.21 Kg Code Description Unit Quantity Rate MATERIALS: (i) Hanging style (Jindal section no 4524) 1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg (ii) Meeting style (Jindal section no 4526) 1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg (iii) Top & bottom rail (Jindal section no 4510) 2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg (iv) Lock rail (Jindal section no 4524) 1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg (v) Glazing plate (Jindal section no 440) on one side of lock rail 1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg (vi) Aluminium snap beading (Jindal section no 4497) on both side 2x2 (0.75+1.26) = 8.04 m 2x2 (0.75+0.81) = 6.24 m = 14.28 m@ 0.176 kg/m = 2.51 kg (vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long 3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg Sub total = 20.62 kg Add 5% wastage = 1.03 kg Total = 21.65 kg

DSR-12

7306 0689

Aluminium Sections for partions, door, windows Aluminium hinge 100x75x4 mm (ix) C.P. brass /stainless steel screws 20 mm For cleat 12x4 = 48 For cleat 4x8 = 32 For glazing plate @ 15 cm centre to centre in 75 cm length 2x6 = 12 Total = 92 nos

kilog 10 No

21.65 4.00

220.00 500.00

0589 7392

CP brass / Stainless steel screws - 20mm Powder coating 50 microns on aluminium sections

100 N kilog

92.00 21.65

100.00 64.00

Page 1048 of 2298

9999

(xi) Carriage of material

7390

Neoprin/ EPDM rubber gasket LABOUR: For fabrication

0116 0139 0114 0100

Fitter grade-I Skilled Beldar Beldar Bandhani For fixing the shutter including hinges:

0111 0114 9999

Carpenter I class Beldar Labour for making provision for fittings and

L.S. metre

31.20 2.35

1.49 25.00

Day Day Day Day

1.00 1.00 0.50 0.40

301.00 260.00 247.00 260.00

Day Day

0.20 0.50

301.00 247.00

L.S.

50.00

1.49 Total: 7592.54

Add water charges @ 1% on

Add C.P & OH @15% on 7668.47 Cost for 20.21 Kg Rate per One Kg: Rate as per DSR-12:

Rs 436.36 Rs 436.35

Item Code: 21.1.2.3 Polyester Powder coated aluminium Polyester Powder coated aluminium Polyester Powder coated aluminium Details of Cost for : 20.21 Kg Code Description Unit Quantity MATERIAL (i) Hanging style (Jindal section no 4524) 1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg (ii) Meeting style (Jindal section no 4526) 1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg (iii) Top & bottom rail (Jindal section no 4510) 2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg (iv) Lock rail (Jindal section no 4524) 1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg (v) Glazing plate (Jindal section no 440) on one side of lock rail

7306 0689

0589

DSR-12

1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg (vi) Aluminium snap beading (Jindal section no 4497) on both side 2x2 (0.75+1.26) = 8.04 m 2x2 (0.75+0.81) = 6.24 m = 14.28 m @ 0.176 kg/m = 2.51 kg (vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long 3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg Sub total = 20.62 kg Add 5% wastage = 1.03 kg Total = 21.65 kg kilog (viii) Aluminium hinges 100x75x4 mm 10 No (ix) C.P. brass /stainless steel screws 20 mm For cleat 12x4 = 48 For cleat 4x8 = 32 For glazing plate @ 15 cm centre to centre in 75 cm length 2x6 = 12 Total = 92 nos 100 N

Rate

21.65 4.00

220.00 500.00

92.00

100.00

Page 1049 of 2298

7393 9999 7390

0116 0139 0114 0100 0111 0114 9999

(X)Polyester powder coating 50 microns on aluminium sections (xi) Carriage of material (xii) Neoprene/ PVC gasket in groove of meeting style LABOUR For fabrication Fitter Beldar (Special) Beldar Bandhani For fixing the shutter including hinges : Carpenter 1st class Beldar Labour for making provision for fittings and carriage of screws etc including sundries

kilog

21.65

70.00

L.S. metre

31.20 2.35

1.49 25.00

Day Day Day Day

1.00 1.00 0.50 0.40

301.00 260.00 247.00 260.00

Day Day L.S.

0.20 0.50 50.00

301.00 247.00 1.49

Add water charges @ 1% on

Total: 7722.44

Add C.P & OH @15% on 7799.66 Cost for 20.21 Kg Rate per One Kg: Rate as per DSR-12:

Rs 443.82 Rs 443.80

Item Code: 21.2.1 with decorative lamination one side and balancing lami- nation on other side . with decorative lamination one side and balancing lami- nation on other side . Details of Cost for : 7.00 Sqm Code Description Unit Quantity Rate Details of cost for 7 sqm MATERIAL 12 mm thick particle board = 7.00 sqm Add 5% wastage = 0.35 sqm 7477 = 7.35 sqm sqm 7.35 690.00 9999 Carriage of particle board L.S. 13.65 1.49 9999 Sundries & screws etc. L.S. 27.30 1.49 LABOUR: 0112 Carpenter 2nd class Day 0.90 273.00 0114 Beldar Day 1.00 247.00 Total: Add water charges @ 1% on 5625.22 Add C.P & OH @15% on 5681.47 Cost for 7.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 933.38 Rs 933.40

Item Code: 21.2.2 P/F 12mm thick prelaminated particle board - Grade-I- decorative lamination on both sides. Details of Cost for : 7.00 Sqm Code Description Unit Quantity MATERIAL 12 mm thick particle board = 7.00 sqm Add 5% waistage = 0.35 sqm. 7480 Total =7.35 sqm sqm 7.35 9999 Carriage of particle board L.S. 13.65 9999 Sundries & screws etc. L.S. 27.30

DSR-12

Rate

720.00 1.49 1.49

Page 1050 of 2298

0112 0114

LABOUR: Carpenter 2nd class Beldar

Day Day

0.90 1.00

Add water charges @ 1% on

273.00 247.00 Total: 5845.72

Add C.P & OH @15% on 5904.18 Cost for 7.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 969.97 Rs 969.95

Item Code: 21.3.1 P/F glazing in aluminium door, window, ventilator shutters etc. complete.: With float glass panes of 4.0mm thickness

Code

Description

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

MATERIALS: FloatGlass panes 4.00 mm thick 1.00 sqm Add for waistage and brecakage 10%-0.10 sqm. Total =1.10 sqm. sqm 2406 9999

Glass sheet 4mm thick (wt. not less than 10Kg/sqm) Carriage of glass

7390

Neoprin/ EPDM rubber gasket LABOUR : Carpenter II class Beldar Sundries and carriage of gasket

0112 0114 9999

sqm

1.10

310.00

L.S. metre

2.42 6.00

1.49 25.00

Day Day

0.23 0.23

273.00 247.00

L.S.

6.89

1.49 Total: 624.48

Add water charges @ 1% on

Add C.P & OH @15% on 630.72 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 725.33 Rs 725.35

Item Code: 21.3.2 P/F glazing in aluminium door, window, ventilator shutters etc. complete.: With float glass panes of 5.5mm thickness

Code

2407 9999 7390 0112 0114 9999

Description MATERIAL Glass panes 5.50 mm thick = 1.00 sqm Add for waistage and brcakge 10%= 0.10 sqm Total =1.00 sqm Carriage of glass Neoprene/ PVC gasket LABOUR: Glazier Beldar Sundries and carriage of gasket

Details of Cost for : 1.00 Sqm Unit Quantity

sqm L.S. metre

1.10 3.33 6.00

450.00 1.49 25.00

Day Day L.S.

0.23 0.23 6.89

273.00 247.00 1.49 Total: 779.83

Add water charges @ 1% on

DSR-12

Rate

Page 1051 of 2298

Add C.P & OH @15% on 787.63 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 905.77 Rs 905.75

Item Code: 21.3.3 P/F glazing in aluminium door, windows, partitions etc. With glass panes 8 mm thick. Details of Cost for : 1.00 Sqm Code Description Unit Quantity MATERIAL A Float Glass Pones 8.00 mm thick = 1.00 sqm Add for waistage and brcakge 10%= 0.10 sqm 2406 Total =1.10 sqm sqm 1.10 9999 Carriage of glass L.S. 3.33 7390 Neoprene/ PVC gasket metre 6.00 LABOUR: 0112 Glazier Day 0.23 0114 Beldar Day 0.23 9999 Sundries and carriage of gasket L.S. 6.89 Add water charges @ 1% on

Rate

310.00 1.49 25.00 273.00 247.00 1.49 Total: 625.83

Add C.P & OH @15% on 632.09 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 726.90 Rs 726.90

Item Code: 21.4.1 P/F double acting hydralic door floor spring With Stainless steel cover plate. Code 7394 9999 9999 04.001.03

0123 0124 0112 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIAL Double action hydraulic floor spring with sfainlessysteel cover plate Carriage Sundries and screws Cement concrete 1:2:4 P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a LABOUR: For cutting hole and making it good Mason 1st class Mason 2nd class Carpenter 2nd class for fixing Beldar

Rate

each

1.00

1525.00

L.S. L.S.

13.00 26.00

1.49 1.49

0.002

4514.03

0.08 0.08 0.01 0.17

301.00 273.00 273.00 247.00 Total: 1673.75

Day Day Day Day

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1690.49 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1953.09 Rs 1953.10

Item Code: 21.4.2

DSR-12

Page 1052 of 2298

P/F double acting hydralic door floor spring With brass cover plate. Code 7396 9999 9999 04.001.03

0123 0124 0112 0114

Details of Cost for : 1.00 No. Unit Quantity

Description MATERIAL Double action hydraulic floor spring with brass cover plate Carriage Sundries and screws Cement concrete 1:2:4 P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a LABOUR: For cutting hole and making it good Mason 1 st class Mason 2nd class Carpenter 2nd class for fixing Beldar

Rate

each

1.00

1675.00

L.S. L.S.

13.00 26.00

1.49 1.49

0.002

4514.03

0.08 0.08 0.01 0.17

301.00 273.00 273.00 247.00 Total: 1823.75

Day Day Day Day

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 1841.99 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2127.32 Rs 2127.30

Item Code: 21.5 P/F powder coated aluminium work in false ceiling with aluminium tees, angles Details of Cost for : 6.35 Kg Code Description Unit Quantity Details of cost for 6.35 kg (2.40x2.40 = 5.76 sqm) MATERIAL (i) Aluminium main runner - assuming Tee of size 35x23.5x1.5 mm @ 600 mm centre to centre 3.00x2.40m, =7.20m

7306 0589 7048

DSR-12

Extra for light fittings 2x1.20 m = 2.40 m = 9.60 m @ 0.247 kg/m = 2.370 kg Aluminium cross runner - assuming Tee of size 35x23.5x1.5 mm @ 600 mm centre to centre 3x4x0.60 m = 7.20 m (-) 2x0.30 = (-) 0.60 m =6.60 m @ 0.247 kg/m = 1.630 kg Perimeter angle aluminium - assuming size 25.4x25.4xl .63 mm @ 600 mm centre to centre 4x2.40 m = 9.60 m @ 0.213 kg/m = 2.045 kg (ii) CLEATS Aluminium angle- assuming size 25.4x25.4xl.63 mm Extra for light fittings =3x2x2 = 12.00 Corner = 4.00 For joining runners = 42.00 = 58.00x0.025 = 1.45 m@ 0.213 kg/m = 0.309 kg Sub total =6.354 kg Add 5% wastage = 0.318 kg = 6.672 kg kilog (iii) C.P. brass/ stainless steel screws 20 mm 100 N for angle cleats (iv) Rawl plug for fixing perimeter angles each

Rate

6.672 1.16

220.00 100.00

24.00

10.00

Page 1053 of 2298

7392

Epoxy powder coating 50 microns on aluminium sections,

kilog

6.67

64.00

9999 9999

(vi) Carriage of material (vii) C.P. brass screws for fixing frame with suspenders LABOUR For fabrication and erection Carpenter 1st class Beldar Scaffolding and sundries

L.S. L.S.

13.00 13.00

1.49 1.49

Day Day L.S.

0.64 0.64 13.00

301.00 247.00 1.49 Total: 2544.71

0111 0114 9999

Add water charges @ 1% on

Add C.P & OH @15% on 2570.16 Cost for 6.35 Kg Rate per One Kg: Rate as per DSR-12:

Rs 465.46 Rs 465.45

Item Code: 21.6 P/F 6 mm dia GI level adjusting hangers. Code

7395

0992 7388 9999 0111 0114

Description Details of cost for 23 nos (hangers in 2.40 mx 2.40 m = 5.76 sqm)one number MATERIAL 6 mm dia G.I. adjustable hangers including clips (upto 1.20 metre length) For light fiting 2x4=8.00 Nos For runners = 15.00 total = 23.00 Nos 6 mm dia. G.I. adjustable hangers including clips (upto 1.2 m length) Ceiling cleats G.I. flat 40X3 mm 60mm long 23x0.06= [email protected]/m= 1.31kg Add 5% wastage = 0.07 kg = 1.38 kg Dash fastner 12.5 mm dia 40 mm long with 6 mm dia bolts Carriage of materials LABOUR: Carpenter 1 st class Beldar

Details of Cost for : 23.00 Nos Unit Quantity

Rate

each

23.00

28.00

quint each

0.014 23.00

4750.00 48.00

L.S.

5.20

1.49

Day Day

0.35 0.27

301.00 247.00 Total: 1994.29

Add water charges @ 1% on

Add C.P & OH @15% on 2014.23 Cost for 23.00 Nos Rate per Each: Rate as per DSR-12:

Rs 100.71 Rs 100.70

Item Code: 21.7.1 P/F machine moulded aluminium covering over expansion joints on vertical surface/ ceiling:- Anodised aluminium sheet 2.5 mm thick. Details of Cost for : 7.00 Kg Code Description Unit Quantity Rate MATERIAL

DSR-12

Page 1054 of 2298

2704 7389 7347

Anodised aluminium sheet 2.5 mm thick, 170 mm wide 5.88m x0.17m = 1.00 sqm @ 7.00 Kg/sqm = 7.00kg Add 5% wastage = 0.035 kg Total = 7.35 kg kilog Anodising 15 microns on aluminium sections kilog Cadmium plated full threaded steel screws 30 mm x 4 mm dia 100 N

7.35 7.35 30.00

210.00 40.00 28.00

7348 8776

Aluminium washers 2 mm 15 mm dia 100 N Stainless steel dash fastener of 8 mm dia and 75 mm long bolt Nos

30.00 30.00

10.00 20.00

9999

Carriage of materials LABOUR Carpenter 2nd class Beldar Sundries including machine work

L.S.

6.50

1.49

Day Day L.S.

0.392 0.392 21.45

273.00 247.00 1.49 Total: 2694.39

0112 0114 9999

Add water charges @ 1% on

Add C.P & OH @15% on 2721.33 Cost for 7.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 447.08 Rs 447.05

Item Code: 21.7.2 P/F machine moulded aluminium covering over expansion joints on vertical surface/ ceiling:- Powder coated aluminium sheet 2.5 mm thick. Details of Cost for : 7.00 Kg Code Description Unit Quantity Rate MATERIAL Anodised aluminium sheet 2.5 mm thick, 170 mm wide 5.88 mm x0.17m =1.00 m@ 7.00kg/sqm wide Add 5% wastage = 0.35 kg 2704 Total = 7.35 kg kilog 7.35 210.00 7392 Epoxy powder coating 50 microns on aluminium sections. kilog 7.35 64.00 7347

Cadmium plated full threaded steel screws 30 mm x 4 mm dia 100 N

30.00

28.00

7348 8776

Aluminium washers 2 mm 15 mm dia 100 N Stainless steel dash fastener of 8 mm dia and 75 mm long bolt Nos

30.00 30.00

10.00 20.00

9999

Carriage of materials LABOUR Carpenter 2nd class Beldar Sundries including machine work

L.S.

6.50

1.49

Day Day L.S.

0.392 0.392 21.45

273.00 247.00 1.49 Total: 2870.79

0112 0114 9999

Add water charges @ 1% on

Add C.P & OH @15% on 2899.50 Cost for 7.00 Kg Rate per One Kg: Rate as per DSR-12:

Rs 476.35 Rs 476.35

Item Code: 21.8.1

DSR-12

Page 1055 of 2298

Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work with weather silocon sealent: Upto 5 mm depth, 5 mm width. Details of Cost for : 1.00 m Code Description Unit Quantity Rate MATERIAL 8646 Silicon sealant (i/c 5% wastage) cartr 0.087 307.00 8654 Masking tape. metre 2.00 1.55 9999 Sundries & profile L.S. 2.60 1.49 9999 Labour L.S. 20.80 1.49 Total: Add water charges @ 1% on 64.67 Add C.P & OH @15% on 65.32 Cost for 1.00 m Rate per One Metre: Rate as per DSR-12:

Rs 75.12 Rs 75.10

Item Code: 21.9.1 Extra for applying additional coating AC 25 instead of AC 15 For fixed portion. Details of Cost for : 41.09 Kg Code Description Unit Quantity 7391 Anodising 25 microns on aluminium sections kilog 41.09 7389 Anodising 15 microns on aluminium sections kilog -41.09 Add water charges @ 1% on

Rate 50.00 40.00 Total: 410.90

Add C.P & OH @15% on 415.01 Cost for 41.09 Kg Rate per One Kg: Rate as per DSR-12:

Rs 11.61 Rs 11.60

Item Code: 21.9.2 Extra for applying additional coating AC 25 instead of AC 15 For shutter of doors, windows and ventilators. Details of Cost for : 21.65 Kg Code Description Unit Quantity 7391 Anodising 25 microns on aluminium sections kilog 21.65 7389 Anodising 15 microns on aluminium sections kilog -21.65 Add water charges @ 1% on

Rate 50.00 40.00 Total: 216.50

Add C.P & OH @15% on 218.67 Cost for 21.65 Kg Rate per One Kg: Rate as per DSR-12:

Rs 11.62 Rs 11.60

Item Code: 21.10 P/F double glazed hermetically sealed glazing in aluminium windows,ventilatorsm partition etc with 6mm thick clear float glass both side having 12 mm gap, EPDM gasket, perforated aluminium spacers, desiccants, sealant etc.

Code

Description

Details of Cost for : 1.00 Sqm Unit Quantity

Rate

MATERIAL Hermetically sealled double glazed unit made with 6mm thick clear float glass both side

DSR-12

Page 1056 of 2298

8648 9999 7390 0112 0114 9999

having 12 mm air gap. = 1.00 sqm Add for wastage & breakage @ 10% = 0.10sqm Total =1.10sqm Hermetically sealled double glazed unit made with 6mm thick clear float glass both side ha Carriage of glass Neoprin/EPDM rubber gasket Glazier Beldar Sundries and carriage of gasket

sqm

1.10

2290.00

L.S. metre Day Day L.S.

6.66 6.00 0.23 0.46 6.89

1.49 25.00 273.00 247.00 1.49 Total: 2865.60

Add water charges @ 1% on

Add C.P & OH @15% on 2894.26 Cost for 1.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 3328.40 Rs 3328.40

Item Code: 21.11.1 P/F stainless steel adjustable friction windows stays 205 x 19 mm. Code 8649 8647 9999 0112 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description MATERIAL Stainless steel (SS 304 grade) adjustable friction window stay. 205 x 19mm Stainless steal screws 30mm x4mm. Carriage LABOUR: Carpenter 2nd class Beldar

Rate

each

10.00

168.00

cent L.S.

0.40 2.73

29.00 1.49

Day Day

0.14 0.14

273.00 247.00 Total: 1768.47

Add water charges @ 1% on

Add C.P & OH @15% on 1786.15 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 205.41 Rs 205.40

Item Code: 21.11.2 P/F stainless steel adjustable friction windows stays 255 x 19 mm. Code 8650 8647 9999 0112 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description MATERIAL Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19mm Stainless steal screws 30mm x4mm. Carriage LABOUR: Carpenter 2nd class Beldar

Rate

each

10.00

189.00

cent L.S.

0.40 2.73

29.00 1.49

Day Day

0.14 0.14

273.00 247.00 Total: 1978.47

Add water charges @ 1% on

Add C.P & OH @15% on 1998.25 Cost for 10.00 Nos

DSR-12

Page 1057 of 2298

Rate per Each: Rate as per DSR-12:

Rs 229.80 Rs 229.80

Item Code: 21.11.3 P/F stainless steel adjustable friction windows stays 355 x 19 mm. Code 8651 8647 9999 0112 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description MATERIAL Stainless steel (SS 304 grade) adjustable friction window stay. 355 x 19mm Stainless steal screws 30mm x4mm. Carriage LABOUR: Carpenter 2nd class Beldar

Rate

each

10.00

236.00

cent L.S.

0.40 2.73

29.00 1.49

Day Day

0.14 0.14

273.00 247.00 Total: 2448.47

Add water charges @ 1% on

Add C.P & OH @15% on 2472.95 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 284.39 Rs 284.40

Item Code: 21.11.4 P/F stainless steel adjustable friction windows stays 510 x 19 mm. Code 8652 8647 9999 0112 0114

Details of Cost for : 10.00 Nos Unit Quantity

Description MATERIAL Stainless steel (SS 304 grade) adjustable friction window stay. 510x19mm Stainless steal screws 30mm x4mm. Carriage LABOUR: Carpenter 2nd class Beldar

Rate

each

10.00

437.00

cent L.S.

0.40 2.73

29.00 1.49

Day Day

0.14 0.14

273.00 247.00 Total: 4458.47

Add water charges @ 1% on

Add C.P & OH @15% on 4503.05 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 517.85 Rs 517.85

Item Code: 21.11.5 P/F stainless steel adjustable friction windows stays 710 x 19 mm. Code 8653 8647 9999 0112 0114

DSR-12

Description MATERIAL Stainless steel (SS 304 grade) adjustable friction window stay. 710 x 19mm Stainless steel screws 30mm x4mm. Carriage LABOUR: Carpenter 2nd class Beldar

Details of Cost for : 10.00 Nos Unit Quantity

Rate

each

10.00

793.00

cent L.S.

0.40 2.73

29.00 1.49

Day Day

0.14 0.14

273.00 247.00

Page 1058 of 2298

Add water charges @ 1% on

Total: 8018.47

Add C.P & OH @15% on 8098.65 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 931.35 Rs 931.35

Item Code: 21.12.1 P/F aluminium tubular handle bar 32 mm O/D, 3.0 mm thick and 2100 mm long Anodized Aluminium tubular Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate Details of cost for 10 nos handle bar. MATERIALS 10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057 cum 0.0057 cum @ 2710 kg/ cum = 15.56kg Add 5% wastage 0.78 kg Total 16.34 kg 7306 Aluminium T or L sections kilog 16.34 220.00 7389 Anodising 15 microns on aluminium sections kilog 16.34 40.00 9999 Carriage of material L.S. 4.42 1.49 8647 Stainless steal screws 30mm x4mm. cent 0.08 29.00 LABOUR 0111 Carpenter 1st class. Day 0.125 301.00 Total: Add water charges @ 1% on 4294.94 Add C.P & OH @15% on 4337.89 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 498.86 Rs 498.85

Item Code: 21.12.2 P/F aluminium tubular handle bar 32 mm O/D, 3.0 mm thick and 2100 mm long Powder coated Aluminium tubular Details of Cost for : 10.00 Nos Code Description Unit Quantity Rate Details of cost for 10 nos handle bar. MATERIALS 10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057 cum 0.0057 cum @ 2710 kg/ cum = 15.56kg Add 5% wastage = 0.78 kg Total = 16.34 kg 7306 Aluminium T or L sections kilog 16.34 220.00 7392 Epoxy powder coating 50 micron on aluminium sections. kilog 16.34 64.00 9999 8647 0111

Carriage of material Stainless steal screws 30mm x4mm. LABOUR Carpenter 1 st class

L.S. cent

4.42 0.08

1.49 29.00

Day

0.125

301.00 Total: 4687.10

Add water charges @ 1% on

Add C.P & OH @15% on 4733.97 Cost for 10.00 Nos

DSR-12

Page 1059 of 2298

Rate per Each: Rate as per DSR-12:

Rs 544.41 Rs 544.40

Item Code: 21.12.3 P/F aluminium tubular handle bar 32 mm O/D, 3.0 mm thick and 2100 mm long Polyester Powder coated Aluminium tubular

Code

7306 7393 9999 8647 0111

Description Details of cost for 10 nos handle bar. MATERIALS 10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057 0.0057 cum @ 2710 kg/cum = 15.56kg Add 5% wastage = 0.78 kg Total =16.34 kg Aluminium T or L sections Polyester powder coating 50 microns on aluminium sections Carriage of material Stainless steal screws 30mm x4mm. LABOUR Carpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity

Rate

kilog kilog

16.34 16.34

220.00 70.00

L.S. cent

4.42 0.08

1.49 29.00

Day

0.125

301.00 Total: 4785.14

Add water charges @ 1% on

Add C.P & OH @15% on 4832.99 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 555.79 Rs 555.80

Item Code: 21.13 P/F 100 mm brass locks for aluminium doors. Code 7001

0111 9999

Details of Cost for : 1.00 No. Unit Quantity

Description

MATERIALS Brass 100 mm mortice latch and lock with 6 levers without each pair of handles LABOUR Carpenter 1 st class Day Sundries and screws L.S.

Rate

1.00

250.00

0.17 3.64

301.00 1.49 Total: 306.59

Add water charges @ 1% on

Add C.P & OH @15% on 309.66 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 356.11 Rs 356.10

Item Code: 21.14 P/F anodised aluminium sub frame work for windows and ventilators Code

Description

Details of Cost for : 4.082 Kg Unit Quantity

Rate

MATERIALS: Aluminium Section

DSR-12

Page 1060 of 2298

(i) External member of the frame (Jindal section no TU/ 3644)

7306 0589 7389 9999

0116 0139 0114 0100 9999

V = 2x2.00 = 4.00 m H = 2x1.20 = 2.40 m = 6.40 m @ 0.607 kg/m = 3.885kg Angle cleat 38x38x4.8 mm 50 mm long 4x0.05 = 0.200 m @ 0.985 kg/m = 0.197 kg sub total = 4.082kg. Add 5% wastage = 0.204kg Total = 4.276kg C.P. brass /stainless steel screws 20 mm for cleat angle. Anodising Carriage of material LABOUR For fabrication of frame Fitter Beldar (Special) Beldar Bandhani Labour for drilling holes, hire charges of drill,

kilog 100 N kilog L.S.

Day Day Day Day L.S.

4.286 8.00 4.286 5.20

220.00 100.00 40.00 1.49

0.04 0.04 0.02 0.01 5.20

301.00 260.00 247.00 260.00 1.49 Total: 1167.84

Add water charges @ 1% on

Add C.P & OH @15% on 1179.52 Cost for 4.082 Kg Rate per One Kg: Rate as per DSR-12:

Rs 332.30 Rs 332.30

Item Code: 21.15.1 P/F aluminium casement windows fasteners for aluminium windows Anodized Aluminium. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS 8660 Aluminium casement window fastner (Anodised AC 15 ) each 10.00 8666 Stainless steel screws 25mm x4mm cent 0.40 LABOUR 0111 Carpenter 1st class Day 0.06 9999 Carriage of materials L.S. 2.73 Add water charges @ 1% on

Rate 40.00 32.00 301.00 1.49 Total: 434.93

Add C.P & OH @15% on 439.28 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 50.52 Rs 50.50

Item Code: 21.15.2 P/F aluminium casement windows fasteners for aluminium windows Powder coated Aluminium. Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS 8661 Aluminium casement window fastner (powder coated). each 10.00 8666 Stainless steel screws 25mm x4mm cent 0.40 LABOUR 0111 Carpenter 1 st class Day 0.06 9999 Carriage of materials L.S. 2.73

DSR-12

Rate 41.00 32.00 301.00 1.49

Page 1061 of 2298

Add water charges @ 1% on

Total: 444.93

Add C.P & OH @15% on 449.38 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 51.68 Rs 51.70

Item Code: 21.15.3 P/F aluminium casement windows fasteners for aluminium windows Polyester Powder coated Aluminium Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS 8662 Aluminium casement window fastner (polyester powder each 10.00 coated). 8666 Stainless steel screws 25mm x4mm cent 0.40 LABOUR 0111 Carpenter 1st class Day 0.06 9999 Carriage of materials L.S. 2.73 Add water charges @ 1% on

Rate 42.00 32.00 301.00 1.49 Total: 454.93

Add C.P & OH @15% on 459.48 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 52.84 Rs 52.85

Item Code: 21.16.1 P/F aluminium round shape handle of O/D 100 mm Anodized Aluminium. Code 8663 8666 0111 9999

Description MATERIALS Aluminium round shape handle (anodised AC 15) Stainless steel screws 25mm x4mm LABOUR Carpenter 1 st class Carriage of materials

Details of Cost for : 10.00 Nos Unit Quantity

Rate

each cent

10.00 0.40

49.00 32.00

Day L.S.

0.06 2.73

301.00 1.49 Total: 524.93

Add water charges @ 1% on

Add C.P & OH @15% on 530.18 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 60.97 Rs 60.95

Item Code: 21.16.2 P/F aluminium round handles - 100mm dia - powder coated Code 8664 8666 0111

DSR-12

Description MATERIALS Aluminium round shape handle (powder coated) Stainless steel screws 25mm x4mm LABOUR Carpenter 1 st class

Details of Cost for : 10.00 Nos Unit Quantity

Rate

each cent

10.00 0.40

54.00 32.00

Day

0.06

301.00

Page 1062 of 2298

9999

Carriage of materials

L.S.

2.73

Add water charges @ 1% on

1.49 Total: 574.93

Add C.P & OH @15% on 580.68 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 66.78 Rs 66.80

Item Code: 21.16.3 P/F aluminium round shape handle of O/D 100 mm Polyester Powder coated Aluminium Details of Cost for : 10.00 Nos Code Description Unit Quantity MATERIALS 8665 Aluminium round shape handle (polyester powder coated). each 10.00

59.00

8666 0111 9999

Stainless steel screws 25mm x4mm LABOUR Carpenter 1st class Carriage of materials

Rate

cent

0.40

32.00

Day L.S.

0.06 2.73

301.00 1.49 Total: 624.93

Add water charges @ 1% on

Add C.P & OH @15% on 631.18 Cost for 10.00 Nos Rate per Each: Rate as per DSR-12:

Rs 72.59 Rs 72.60

Item Code: 21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern ...

Code

8774 9999

0116 0139 0114 0100 9999

Description MATERIALS: Aluminium grill = 10 kg Add wastage @ 20% = 2 kg Total = 12.00 kg Aluminium Grill (anodised) Carriage LABOUR: for fixing Fitter (grade 1) Skilled Beldar (for floor rubbing etc.) Beldar Bandhani Sundries

Details of Cost for : 10.00 Kg Unit Quantity

Rate

Kg L.S.

12.00 11.00

250.00 1.49

Day Day Day Day L.S.

0.50 0.25 0.25 0.05 25.00

301.00 260.00 247.00 260.00 1.49 Total: 3343.89

Add water charges @ 1% on

Add C.P & OH @15% on 3377.33 Cost for 10.00 Kg Rate per One Kg: Rate as per DSR-12:

DSR-12

Rs 388.39 Rs 388.40

Page 1063 of 2298

Item Code: 21.18 P/F 12 mm thick frameless toughened glass door shutter including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. .. Details of Cost for : 2.10 Sqm Code Description Unit Quantity Rate MATERIALS: Glass = 2.10 sqm Add wastage @ 10% = 0.21 sqm Total = 2.31 Sqm 8778 Toughened glass 12 mm thickness Sqm 2.31 1800.00 9999 Carriage of glass panes and other materials L.S. 8.19 1.49 9999 Methylated spirit L.S. 5.33 1.49 Stainless steel pivot and spring type fixing 21.004.01 P/F double acting hydralic door floor spring With Stainless Nos 2.00 1953.09 steel cover plate. LABOUR: 0119 Glazier Day 0.90 273.00 0114 Beldar Day 0.90 247.00 9999 Sundries, sush rog cotton etc., L.S. 1.13 1.49 Total: Add water charges @ 1% except on [A] i.e on 4647.82 Add C.P & OH @15% except on [A] i.e on 4694.30 Cost for 2.10 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 4430.78 Rs 4444.75

Item Code: 22.1.1 P/F integral cement based treatment for water proofing on horizontal surface at all depth below ground structures: Using rough kota stone. Details of Cost for : 10.00 Sqm Code Description Unit Quantity MATERIAL Ist layer 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.25 (Rate as per item no. 3.8) 1169 Kota stone slab = 10 sqm Sqm 11.00 Wastage @ 10% = 1sqm Total = 11 sqm 2216 Cartage 11x0.025 @2330 kg/cum = 0.64 t tonne 0.64 Cement mortar 1:3 10x0.025 = 0.25 cum Wastage @ 12% = 0.03 cum 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.28 Cement for slurry Bed 2x10.00 @ 2kg/cum = 40.00 kg Joints 4x3.7x0.02x0.037 = 0.011 cum 25x0.6x0.02x0.037 = 0.011 cum = 0.022 cum @ 1440 kg/cum =31.68 kg 0367 Total = 71.88 kg or 0. 72 t tonne 0.072 2209 Carriage of cement tonne 0.072 Water proofing material Mortar = 0.25 + 0.28 = 0.53 cum Cement in 0.53 cum @ 5.1 q/cum = 2.7 quintal Cement in slurry = 0.73 quintal = 3.43 quintal @ 1 kg for 50 kg of cement

DSR-12

level for under ground

Rate

4145.53 175.00

77.87

4145.53

5000.00 77.87

Page 1064 of 2298

1213 0296 2202 0125 0114 0115 0125 0114 0101 9999

i.e. 6.86 kg 12 mm stone grit @ 8 cudm/sqm 1x10.3x8x1/1000 = 0.08 cum Carriage Labour for base mortar & kota stone laying i/c slurry job Mason 2nd class Beldar Coolie Labour for top layer & spreading stone grit Mason 2nd class Beldar Bhisti Sundries

kilog

6.86

25.00

cum

0.08

1050.00

cum Day Day Day

0.08 1.20 1.00 1.00

87.60 273.00 247.00 247.00

Day Day Day L.S.

1.08 1.08 0.45 6.24

273.00 247.00 260.00 1.49 Total: 6309.59

Add water charges @ 1% on

Add C.P & OH @15% on 6372.69 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 732.86 Rs 732.85

Item Code: 22.2.1 P/L integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 20 to 25 mm thick with cement slurry with cement mortar 1 : 3. Using rough kota stone.

Code

1169 2216

0367 2209 13.009.02

1213

0125 0114 0115 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description MATERIAL 1st layer Kota stone slab = 10 sqm Wastage 10% = 1 sqm Total = 11 sqm Cartage 11x0.025 @ 2330 kg/cum = 0.64t Cement slurry for jointing 6x3.70 = 22.20 m 7x2.78= 19.46 m =41.66x0.025x0.012 = 0.013 cum Cement slurry for filling 20 mm gap 10x0.02 = 0.200 cum = 0.213 cum @ 1440 kg/cum = 306.70 kg or 0.307 t Carriage Cement plaster 1:3 with neat cement punning) Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. Water proofing material Cement slurry = 0.31 t = 310 kg Cement plaster 1:3 @ 13.62 q/100sqm = 136.20 kg Total = 446.20 kg @ 1 kg for 50 kg of cement i.e. 8.90 kg LABOUR Fixing of Kota stone and applying cement & applying slurry. Mason 2nd class Beldar Coolie Sundries and scaffolding

Sqm tonne

11.00 0.64

175.00 77.87

tonne tonne

0.31 0.31

5000.00 77.87

10.00

233.79

kilog

8.90

25.00

Day Day Day L.S.

3.00 3.00 1.00 18.20

273.00 247.00 247.00 1.49 Total: 5605.60

Add water charges @ 1% except on [A] i.e on

DSR-12

Rate

Page 1065 of 2298

Add C.P & OH @15% except on [A] i.e on 5661.66 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 884.88 Rs 884.90

Item Code: 22.3 P/L water proofing treatment to vertical and horizontal surfaces of depressed of W.C, kitchen ... Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIAL 0367 Cement slurry @ 4.4 kg/sqm = 44.00 kg or 0.044 t tonne 0.044 5000.00 2209 Carriage tonne 0.044 77.87 Cement plaster 1:3 (20 mm thick) MATERIALS : 03.008 Cement mortar 1:3 (1 cement : 3 coarse sand) 0.224 4145.53 LABOUR 0155 Mason Day 0.94 287.00 0115 Coolie Day 1.02 247.00 0101 Bhisti Day 1.10 260.00 9999 Scafolding and sundries L.S. 12.61 1.49 Bitumen blown or/and residual bitumen 0313 = 10x1.70= 17 kg = 0.017 t tonne 0.017 37000.00 2211 Carriage tonne 0.017 87.60 3002 PVC 400 micron thick sheet sqm 10.00 31.00 9999 Carriage L.S. 13.00 1.49 Water proofing compound @ 1 kg per 50 kg of cement used Cement slurry = 44 kg Cement plaster 1:3 10x(13.62xl00)/100= 136.2 kg 1213 Total = 180.2 kg/50 = 3.60 kg kilog 3.60 25.00 LABOUR 0131 Painter Day 0.20 273.00 0114 Beldar Day 1.33 247.00 0130 Mistry Day 0.06 301.00 9999 Sundries L.S. 7.28 1.49 Total: Add water charges @ 1% on 3440.42 Add C.P & OH @15% on 3474.82 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 399.60 Rs 399.60

Item Code: 22.4.1 P/P in position suitable PVC water stops conforming to IS: 12200 for constructions/ expansion joints: Serrated with central bulb (225 mm wide, 8-11mm thick). Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 7427 Water stop serreted with bulb metre 100.00 390.00 LABOUR 0114 Beldar Day 2.00 247.00 9999 Sundries & wire etc. L.S. 26.00 1.49 Total: Add water charges @ 1% on 39532.74

DSR-12

Page 1066 of 2298

Add C.P & OH @15% on 39928.07 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 459.17 Rs 459.15

Item Code: 22.4.2 P/P in position suitable PVC water stops conforming to IS: 12200 for constructions/ expansion joints: Dumb bell with central bulb (180 mm wide, 8 mm thick). Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 7428 Water stops Dumb bell with central bulb metre 100.00 351.00 LABOUR 0114 Beldar Day 2.00 247.00 9999 Sundries & wire etc. L.S. 26.00 1.49 Total: Add water charges @ 1% on 35632.74 Add C.P & OH @15% on 35989.07 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 413.87 Rs 413.85

Item Code: 22.4.3 P/P in position suitable PVC water stops conforming to IS: 12200 for constructions/ expansion joints: Kickers (320 mm wide, 5 mm thick). Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIAL 7429 Kickers (320 mm wide, 5 mm thick) metre 100.00 360.00 LABOUR 0114 Beldar Day 2.00 247.00 9999 Sundries & wire etc. L.S. 26.00 1.49 Total: Add water charges @ 1% on 36532.74 Add C.P & OH @15% on 36898.07 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 424.33 Rs 424.35

Item Code: 22.5 P/L water proofing treatment in sunken portion of WC's bathroom etc. by applying cement slurry mixed with water proofing cement compound Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: Cement 10x(0.488 + 0.242) = 7.30 kg Sealing fillets10 x 0.5 kg =5.00kg

DSR-12

0367

Total = 12.30 kg = 0.012 tonne

2209

Carraige of Cement Bonding material 1.6 kgx30x2 = 96 kg

tonne tonne

0.012 0.012

5000.00 77.87

Page 1067 of 2298

Bitumen (blown/residual type) 10x(0.25+0.126) = 3.79kg Sealing fillets 10x0.10 kg / sqm = 1.00 kg Wastage @ 5% on 4.79 kg = 0.24 kg 8501

Total = 5.03 kg Say 5.00 kg

0155 0114 0101 9999

LABOUR : Mason (average) Beldar Bhisti Sundries, brushes etc

kilog

5.00

127.00

Day Day Day

2.00 2.00 0.25

287.00 247.00 260.00

L.S.

15.60

1.49 Total: 1852.17

Add water charges @ 1% on

Add C.P & OH @15% on 1870.69 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 215.13 Rs 215.15

Item Code: 22.6 P/L water proofing treatment on roofs of slab by applying cement slurry mixed with water proofing cement compound Consisting of applying: Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIAL Cement 10x (1.289 + 0.488) = 17.77 kg Sealing fillets @ 10% = 1.77 kg 0367 Total = 19.54kg = 0.020 tonne tonne 0.02 5000.00 2209 Carriage of Cement tonne 0.02 77.87 Bonding material 1.6 kgx30x2 = 96 kg Bitumen (blown/residual type) 10x(0.253+0.67) = 9.23kg Wastage 5% = 0.46 kg 8501 Total = 9.69 kg kilog 9.69 127.00 Fibre Glass cloth = 10.00 sqm Wastage 10 % - 1.00 sqm 8502 Total = 11.00 sqm sqm 11.00 39.00 LABOUR 0155 Mason (average) Day 2.00 287.00 0114 Beldar Day 1.00 247.00 0101 Bhisti Day 0.25 260.00 9999 Sundries, brushes etc L.S. 23.40 1.49 Total: Add water charges @ 1% on 2682.06 Add C.P & OH @15% on 2708.88 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 311.52 Rs 311.50

Item Code: 22.7.1 P/l integral cement based water proofing treatment : With average thickness of 120mm and minimum thickness at khurra as 65 mm. Details of Cost for : 10.00 Sqm

DSR-12

Page 1068 of 2298

Code 0367 03.010

0285 2260 03.010 0114 0101 0123 0124 0128 0114 9999 0367 0114 13.006.01

1213

7233

0124 0114 9999 0124 0114 0101

Description i) Cement slurry Cement Cement mortar 1:5 (1 cement : 5 coarse sand) iii) Roof treatment with brick bats and cement mortar MATERIALS: Brick bats/ brick aggregate Carriage Cement mortar 1:5 (1 cement : 5 coarse sand) LABOUR Beldar Bhishti Mason 1 st class Mason 2nd class Mate Extra labour for ramming Beldar Sundries iv) Cement slury Cement Beldar v) 20 mm cement plaster 1:4(1 cement: 4 coarse sand) 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) vi) Water proofing compound 27.50+27.50+69.40+124.00 = 248.40 kg @ 1 kg per bag of cement Extra for making chequers for 10 sqm Fibre glass tissue reinforcement Type IIGrade I LABOUR: Mason 2nd class Beldar Chequer plate Add labour for laying 20 mm bed mortar Mason 2nd class Beldar Bhishti TOTAL

Unit

Quantity

Rate

0.0275 0.224

5000.00 3129.96

cum cum

0.94 0.94 0.50

475.00 95.22 3129.96

Day Day Day Day Day

1.75 0.28 0.05 0.05 0.04

247.00 260.00 301.00 273.00 260.00

Day L.S.

0.25 13.65

247.00 1.49

0.0275 0.20

5000.00 247.00

10.00

186.68

kilog

5.00

25.00

sqm

10.50

65.00

Day Day L.S.

0.36 0.36 13.65

273.00 247.00 1.49

Day Day Day

0.54 0.54 0.45

273.00 247.00 260.00 Total: 5165.58

tonne

tonne Day

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 5217.24 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 786.66 Rs 786.70

Item Code: 22.8.1 P/L four courses water proofing with : bitumen felt (hessian base) type 3 grade I. Details of Cost for : 30.00 Sqm Code Description Unit Quantity Rate Blown or / and residual bitumen applied hot 0313 = 2x1.45x30 = 87 kg tonne 0.087 37000.00 Hession felt type 3 Grade I (hessian base self finished bitumen felt) = 30 sqm Add for over lapping @ 10% = 3 sqm. 0322 Total = 33 Sqm. sqm 33.00 50.00 1177 Stone grit 6mm and down size or pea sized gravel. 30x6=180 cum 0.18 900.00 cudm.

DSR-12

Page 1069 of 2298

2202 2211

2200 9999

Carriage of stone grit Carriage of bitumen and felt. = 0.162t 0.087tx2.7x.001x33=0.162t Fuel (Steam coal) = 2 quintals/t of bitumen i.e. 2x0.087=0.174q Carriage of fuel Praparing roof surface, sutting groove and making good etc.

0131 0114 0130 9999

LABOUR: Painter Beldar Mistries Sundries, brushes etc.

0370

cum tonne

0.18 0.162

87.60 87.60

quint

0.174

400.00

tonne L.S.

0.0174 134.55

100.11 1.49

2.16 3.24 0.18 6.76

273.00 247.00 301.00 1.49 Total: 6786.99

Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 6854.86 Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 262.77 Rs 262.75

Item Code: 22.9 P/L Six courses water proof- ing treatment with bitumen felt ( hession base ) type 3 grade I . Details of Cost for : 30.00 Sqm Code Description Unit Quantity Rate 0313 Blown or / and residual bitumen applied hot tonne 0.123 37000.00 (1.45+1.20+1.45)x30 123 Kg. 0322 Bitumen felt type 3 grade I sqm 66.00 50.00 (hession base self finished bitumen felt) = 60 sqm.+ Add for over lapping @ 10% = 6 sqm. =66 Sqm. 2211 Carriage of bitumen and felt. =0.273t. tonne 0.273 87.60 0.123tx2.7x.001x66=0.273t 1177 Stone grit 6mm and sown size or pea sized gravel cum 0.18 900.00 30x6=180cudm. 2202 Carriage of stone grit cum 0.18 87.60 0370 Fuel (Steam coal) = 2 quintals/t of bitumen i.e. quint 0.246 400.00 2x0.123=0.246q 2200 Carriage of fuel tonne 0.0246 100.11 9999 Praparing roof surface, sutting groove and making good etc. L.S. 134.55 1.49

0131 0114 0130 9999

LABOUR: Painter Beldar Mistries Sundries, brushes etc.

Day Day Day L.S.

3.24 4.86 0.20 6.76

Add water charges @ 1% on

273.00 247.00 301.00 1.49 Total: 10509.23

Add C.P & OH @15% on 10614.32 Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 406.88 Rs 406.90

Item Code: 22.10

DSR-12

Page 1070 of 2298

P/L six courses water proofing treatment with bitumen felt (fibre base self finished bitumen felt). Details of Cost for : 30.00 Sqm Code Description Unit Quantity Rate 0313 Blown bitumen applied hot tonne 0.1305 37000.00 (1.45+1.20+1.70)x30 130.5 Kg. 0318 Bitumen felt type B grade I sqm 66.00 55.00 (fibre base self finished bitumen felt) = 60 sqm. Add for over lapping @ 10% = 6 sqm. Total =66 Sqm. 2211 Carriage of bitumen and felt. tonne 0.275 87.60 0.131 tx2.22x.001x66 = 0.248t 1177 Stone grit 6mm and sown size or pea sized ravel. cum 0.18 900.00 30x6=180cudm. 2202 Carriage of stone grit cum 0.18 87.60 0370 Fuel (Steam coal) = 2 quintals/t of bitumen i.e. quint 0.261 400.00 2x0.1305=0.261q 2200 Carriage of fuel tonne 0.0261 100.11 9999 Preparing roof surface, sutting groove and making good etc. L.S. 134.55 1.49

0131 0114 0130 9999

LABOUR: Painter Beldar Mistries Sundries, brushes etc.

Day Day Day L.S.

4.32 6.48 0.36 6.76

Add water charges @ 1% on

273.00 247.00 301.00 1.49 Total: 11866.20

Add C.P & OH @15% on 11984.86 Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 459.42 Rs 459.40

Item Code: 22.11 P/L six cours water proofing treatment with bitumen felt (glass fibre base self fini- shed bitumen felt). Details of Cost for : 30.00 Sqm Code Description Unit Quantity Rate 0313 Blown or / and residual bitumen applied hot tonne 0.1305 37000.00 (1.45+1.20+1.70)x30 =130.5 Kg. 0318 Bitumen felt type 2 grade II sqm 66.00 55.00 (fibre base self finished bitumen felt) = 60 sqm.+ Add for over lapping @ 10% = 6 sqm. =66 Sqm. 2211 Carriage of bitumen and felt. tonne 0.334 87.60 0.131tx3.08x.001x66=334kg. 1177 Stone grit 6mm and down size or pea sized ravel. cum 0.18 900.00 30x6=180cudm. 2202 Carriage of stone grit cum 0.18 87.60 0370 Fuel (Steam coal) = 2 quintals/t of bitumen i.e. quint 0.261 400.00 2x0.1305=0.261q (As per CS1) 2200 Carriage of fuel tonne 0.0261 100.11 9999 Preparing roof surface, sutting groove and making good etc. L.S. 134.55 1.49

0131 0114 0130 9999

DSR-12

LABOUR: Painter Beldar Mistries Sundries, brushes etc.

Day Day Day L.S.

4.32 6.48 0.36 6.76

273.00 247.00 301.00 1.49

Page 1071 of 2298

Add water charges @ 1% on

Total: 11871.37

Add C.P & OH @15% on 11990.08 Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 459.62 Rs 459.60

Item Code: 22.12 Supplying and applying bitum- enous solution primer on roof Code 0316 9999 0131 0114 9999

Description MATERIALS Bitumenous solution primer Carriage LABOUR: Painter Beldar Sundries brushes etc

Details of Cost for : 10.00 Sqm Unit Quantity

Rate

litre L.S.

2.40 1.43

40.00 1.49

Day Day L.S.

0.17 0.17 13.52

273.00 247.00 1.49 Total: 206.67

Add water charges @ 1% on

Add C.P & OH @15% on 208.74 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 24.01 Rs 24.00

Item Code: 22.13.1 Deduct for omitting stone grit 6 mm down size or pea sized gravel:- at 6 cubic dm per sqm. Details of Cost for : -10.00 Sqm Code Description Unit Quantity MATERIALS: 1177 Stone grit 6mm or down size 6x10 = 60 cudm. cum 0.06 2202 Carriage of stone grit cum 0.06 9999 Labour for screening and spreading grit L.S. 21.58 9999 Sundries L.S. 6.76 Add water charges @ 1% on

Rate 900.00 87.60 1.49 1.49 Total: 101.48

Add C.P & OH @15% on 102.49 Cost for -10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

-Rs 11.79 -Rs 11.80

Item Code: 22.13.2 Deduct for omitting stone grit 6 mm down size or pea sized gravel:- at 8 cubic dm per sqm. Details of Cost for : -10.00 Sqm Code Description Unit Quantity MATERIALS: 1177 Stone grit 6mm or down size 6x10 = 60 cudm. cum 0.08 2202 Carriage of stone grit cum 0.08 9999 Labour for screening and spreading grit L.S. 26.91 9999 Sundries L.S. 6.76

DSR-12

Rate 900.00 87.60 1.49 1.49 Total:

Page 1072 of 2298

Add water charges @ 1% on

129.18

Add C.P & OH @15% on 130.47 Cost for -10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

-Rs 15.00 -Rs 15.00

Item Code: 22.14.1 Grading roof for water proof- ing treatment with :- C.C 1 : 2 : 4 . Code 0295 0297 2202 0982 2203 0367 2209 0114 0101 0123 9999 0002 0012 9999

Details of Cost for : 1.00 Cum Unit Quantity cum 0.67 cum 0.22 cum 0.89 cum 0.45 cum 0.45 tonne 0.32 tonne 0.32

Description Stone aggregate 20mm nominal size Stone aggregate 10mm nominal size Carriage of stone aggregate Coarse sand Carriage of coarse sand Cement Carriage of cement LABOUR:Beldar Bhishti Mason 1st Class Sundries, brushes etc. Mixer Vibrator Sundries for laying in terrace

Day Day Day L.S. Day Day L.S.

1.63 0.70 0.10 14.30 0.07 0.07 45.76

Add water charges @ 1% on

Rate 1050.00 1050.00 87.60 1120.00 87.60 5000.00 77.87 247.00 260.00 301.00 1.49 800.00 300.00 1.49 Total: 3962.00

Add C.P & OH @15% on 4001.62 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 4601.86 Rs 4601.85

Item Code: 22.14.2 Grading roof for water proof- ing treatment with :- C.M 1 : 3 coarse sand. Code 03.008 0155 0114 0101 0115 9999

Description MATERIALS: Cement mortar 1:3 (1 cement : 3 coarse sand) LABOUR Mason Beldar Bhishti Coolie Sundries

Details of Cost for : 1.00 Cum Unit Quantity

Day Day Day Day L.S.

Rate

1.00

4145.53

1.00 2.00 0.50 5.00 11.70

287.00 247.00 260.00 247.00 1.49 Total: 6308.96

Add water charges @ 1% on

Add C.P & OH @15% on 6372.05 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 7327.86 Rs 7327.90

Page 1073 of 2298

Item Code: 22.14.3 Grading roof for water proof- ing treatment with :- C.M 1 : 4 coarse sand. Code 03.009 0155 0114 0101 0115 9999

Details of Cost for : 1.00 Cum Unit Quantity

Description MATERIALS: Cement mortar 1:4 (1 cement : 4 coarse sand). LABOUR Mason Beldar Bhishti Coolie Sundries

Day Day Day Day L.S.

Rate

1.00

3485.41

1.00 2.00 0.50 5.00 10.79

287.00 247.00 260.00 247.00 1.49 Total: 5647.49

Add water charges @ 1% on

Add C.P & OH @15% on 5703.96 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 6559.55 Rs 6559.55

Item Code: 22.15 P/L in situ seven courses water proofing treatment with APP (Atactic PolyProp- lene) modified memberane manufactured by Bengal Bitu- men, integrated Watre proo- fing Ltd. or General membe- ranes with 1.5 mm.

Code

8200 0316 0313 2211 9999 0370 2200 9999

0131 0114 0130 9999

Details of Cost for : 30.00 Sqm Unit Quantity

Description MATERIAL APP modified polymeric felt (two layers) 1.5 mm thick = 2x30 = 60 sqm Add 10% wastage = 6 sqm Total = 66 sqm Bitumen primer 0.4x30 = 12 Bitumen (Blown/ residual type) 3x36 =108 kg = 0.108 tonne Carriage of bitumen primer Carriage of polymeric felt Fuel (steam coal) Carriage of fuel Preparing roof surface, cutting grooves and making good the same LABOUR Painter Beldar Mistry Sundries, brushes etc

Rate

sqm litre tonne

66.00 12.00 0.108

59.00 40.00 37000.00

tonne L.S. quint tonne L.S.

0.12 7.80 0.174 0.0174 134.55

87.60 1.49 400.00 100.11 1.49

2.16 3.24 0.18 6.76

273.00 247.00 301.00 1.49 Total: 10118.16

Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 10219.34 Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 391.74 Rs 391.75

Item Code: 22.16

DSR-12

Page 1074 of 2298

P/L in situ five courses water proofing treatment with APP (Atactic Poly- Proplene) modified polyme- ric memberane manufactured by Bengal Bitumen, integra- ted Watre proofing Ltd. or General memberanes with 2.0 mm thick.

Code

8201 0316 0313 2211 9999 0370 2200 9999

0131 0114 0130 9999

Details of Cost for : 30.00 Sqm Unit Quantity

Description MATERIAL APP modified polymeric felt (two layers) 2.0 mm thick =30 sqm Total = 33 sqm Bitumen primer 0.4x30 = 12 Bitumen (Blown/ residual type) 1.20x30x2 =72 kg = 0.072 tonne Carriage of bitumen primer Carriage of polymeric felt Fuel (steam coal) Carriage of fuel Preparing roof surface, cutting grooves and making good the same LABOUR Painter Beldar Mistry Sundries, brushes etc

Rate

sqm litre tonne

33.00 12.00 0.072

99.00 40.00 37000.00

tonne L.S. quint tonne L.S.

0.084 7.80 0.174 0.0174 134.55

87.60 1.49 400.00 100.11 1.49

1.58 2.37 0.13 6.76

273.00 247.00 301.00 1.49 Total: 7767.73

Day Day Day L.S.

Add water charges @ 1% on

Add C.P & OH @15% on 7845.41 Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 300.74 Rs 300.75

Item Code: 22.18.1 P/L APP (Atactic PolyProplene polymer)modified prefbricated five layer 2 mm thick water proofing memberane,with glass fibre matt manufactured Bitumen Co. Ltd., Sopreme or Tamko consisting: joints strength trasverse 350/300 tear strength 60/80N. 2 mm thic

Code

8203 8206 2211 9999 1241 9999 0159 0130 0114 9999

DSR-12

Description

Details of Cost for : 30.00 Sqm Unit Quantity

MATERIALS : A.P.P. modified 2 mm thick 30 sqm Add 10% for waistage = 3 sqm Total = 33 sqm A.P.P. modified 2 mm thick membrane reinforced with glass sqm fibre matt Bitumen primer for bitumen membrane litre Carriage of Tar bitumen tonne Carriage of bitumen membrane L.S. Fuel LPG kg Preparing roof surface, cutting grooves L.S. LABOUR: Skilled torch operator for laying tack Day Mistry Day Beldar Day Sundries, brushes, bitumen torch etc L.S.

Rate

33.00

167.00

12.00 0.012 7.80 7.00 49.53

71.00 87.60 1.49 51.00 1.49

2.16 0.18 3.24 23.40

Add water charges @ 1% on

301.00 301.00 247.00 1.49 Total: 8345.96

Add C.P & OH @15% on

8429.42

Page 1075 of 2298

Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 323.13 Rs 323.15

Item Code: 22.19.1 P/L APP (Atactic PolyProplene polymer) five layer 3 mm thick water proofing memberane,with glass fibre matt manufactured Bitumen Co. Ltd., Sopreme or Tamko consisting: joints strength trasverse 350/300 tear strength 60/80N. 3 mm thick.

Code

8204 8206 2211 9999 1241 9999 0159 0130 0114 9999

Details of Cost for : 30.00 Sqm Unit Quantity

Description MATERIALS : A.P.P. modified 3mm thick =-30 sqm Add 10% for wastage 3 sqm. Total 33 sqm A.P.P. modified 3 mm thick membrance reinforced with glass fibre matt Bitumen primer for bitumen membrance Carriage of Tar bitumen Carriage of bitumen membrance Fuel LPG Preparing roof surface, cutting grooves LABOUR: Skilled torch operator for laying tack Mistry Beldar Sundries, brushes, bitumen torch etc

Rate

sqm

33.00

207.00

litre tonne L.S. kg L.S.

12.00 0.012 7.80 7.00 49.53

71.00 87.60 1.49 51.00 1.49

Day Day Day L.S.

2.16 0.18 3.24 23.40

301.00 301.00 247.00 1.49 Total: 9665.96

Add water charges @ 1% on

Add C.P & OH @15% on 9762.62 Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 374.23 Rs 374.25

Item Code: 22.20.1 P/L APP (Atactic PolyProplene polymer)modified prefbricated five layer 3 mm thick water proofing memberane,with glass fibre matt manufactured Bitumen Co. Ltd., Sopreme or Tamko consisting: 3 mm thick.

Code

8205 8206 2211 9999 1241 9999 0159 0130 0114 9999

DSR-12

Description

Details of Cost for : 30.00 Sqm Unit Quantity

MATERIALS : A.P.P. modified 3mm thick - 30 sqm Add 10% for wastage = 3 sqm. Total = 33 sqm A.P.P. modified 3 mm thick membrance reinforced with sqm polyster matt Bitumen primer for bitumen membrane litre Carriage of Tar bitumen tonne Carriage of bitumen membrane L.S. Fuel LPG kg Preparing roof surface, cutting grooves L.S. LABOUR: Skilled torch operator for laying tack Day Mistry Day Beldar Day Sundries, brushes, bitumen torch etc L.S.

Rate

33.00

245.00

12.00 0.012 7.80 7.00 49.53

71.00 87.60 1.49 51.00 1.49

2.16 0.18 3.24 23.40

301.00 301.00 247.00 1.49 Total:

Page 1076 of 2298

Add water charges @ 1% on

10919.96

Add C.P & OH @15% on 11029.16 Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 422.78 Rs 422.80

Item Code: 22.21 Extra for covering top of memberene with Geotexile, 120 grams non wovwn, 100 % polyster of thickness 1.0 to 1.25 mm by Bhutan Troch as manufactures recommented (for item No.22.18to22.20).

Code

8207 9999 0159 0130 0114 9999

Description MATERIALS : Geotextile 120 gsm membrane =30 sqm Add 5% for wastage = 1.5 sqm. Total 31.50sqm Geotextile 120 gsm membrance Carriage of Geotextile LABOUR: Skilled torch operator for laying tack Mistry 0.18-5 = 0.04 Beldar 3.24-5 = 0.65 Sundries, torch, LPG etc

Details of Cost for : 30.00 Sqm Unit Quantity

Rate

sqm L.S.

31.50 7.80

32.00 1.49

Day Day Day L.S.

0.43 0.04 0.65 46.80

301.00 301.00 247.00 1.49 Total: 1391.37

Add water charges @ 1% on

Add C.P & OH @15% on 1405.28 Cost for 30.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 53.87 Rs 53.85

Item Code: 23.1 Trenching in ordinary soil upto a depth of 60 Cm. Code 0114 9999 0115

Description LABOUR Beldar Sundries collies

Details of Cost for : 10.00 Cum Unit Quantity Day L.S. Day

0.71 2.73 0.35

Add water charges @ 1% on

Rate 247.00 1.49 247.00 Total: 265.89

Add C.P & OH @15% on 268.55 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 30.88 Rs 30.90

Item Code: 23.2 Supplying and stacks good earth at site i/c carriage. Code

0114

DSR-12

Description Details of cost for 1 cum. Excavation: Beldar

Details of Cost for : 1.00 Cum Unit Quantity

Day

0.177

Rate

247.00

Page 1077 of 2298

0115 0979 2241

Coolie Royalty for good earth Carriage of good earth by mechanical

Day cum cum

0.167 1.00 1.00

Add water charges @ 1% on

247.00 30.00 109.50 Total: 224.47

Add C.P & OH @15% on 226.71 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 260.72 Rs 260.70

Item Code: 23.3 Supplying and stacks sludge at site i/c carriage. Code 2317

Description Carriage of sludge by mechanical transport upto 1 km lead

Details of Cost for : 1.00 Cum Unit Quantity cum 1.00

0980

Royalty of sludge

cum

1.00

Add water charges @ 1% on

Rate 95.22 90.00 Total: 185.22

Add C.P & OH @15% on 187.07 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 215.13 Rs 215.15

Item Code: 23.4.1 Supplying and stacks at site dump manure i/c carriage. Screened sieve I.S. 20 mm. Details of Cost for : 1.00 Cum Code Description Unit Quantity 2242 Carriage of dump manure (by mechanical transport) cum 1.00 Labour for screening: 0114 Beldar Day 0.08 9999 Sundries L.S. 2.73 Add water charges @ 1% on

Rate 95.22 247.00 1.49 Total: 119.05

Add C.P & OH @15% on 120.24 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 138.28 Rs 138.30

Item Code: 23.4.2 Supplying and stacks at site dump manure i/c carriage. Screened sieve I.S. 16 mm. Details of Cost for : 1.00 Cum Code Description Unit Quantity 2242 Carriage of dump manure (by mechanical transport) cum 1.00 Labour for screening : 0114 Beldar Day 0.13 9999 Sundries L.S. 2.73

DSR-12

Rate 95.22

Add water charges @ 1% on

247.00 1.49 Total: 131.40

Add C.P & OH @15% on

132.71

Page 1078 of 2298

Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 152.62 Rs 152.60

Item Code: 23.4.3 Supplying and stacks at site dump manure i/c carriage. Screened sieve I.S. 4.75 mm. Details of Cost for : 1.00 Cum Code Description Unit Quantity 2242 Carriage of dump manure (by mechanical transport) cum 1.00 Labour for screening : 0114 Beldar Day 0.17 9999 Sundries L.S. 2.73 Add water charges @ 1% on

Rate 95.22 247.00 1.49 Total: 141.28

Add C.P & OH @15% on 142.69 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 164.09 Rs 164.10

Item Code: 23.5 Code 0114 9999

Description LABOUR: Beldar Sutndries

Details of Cost for : 100.00 Sqm Unit Quantity Day L.S.

0.20 1.43

Add water charges @ 1% on

Rate 247.00 1.49 Total: 51.53

Add C.P & OH @15% on 52.05 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 59.86 Rs 59.85

Item Code: 23.6 Uprooting weeds from trenched area, disposal of uprooted. Code 0114 0115 9999

Description LABOUR: Beldar Coolie Sundries

Details of Cost for : 100.00 Sqm Unit Quantity Day Day L.S.

0.33 0.33 2.73

Add water charges @ 1% on

Rate 247.00 247.00 1.49 Total: 167.09

Add C.P & OH @15% on 168.76 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 194.07 Rs 194.05

Item Code: 23.7 Details of Cost for : 100.00 Sqm

DSR-12

Page 1079 of 2298

Code 0114 9999

Description LABOUR: Beldar Sundries

Unit

Quantity

Rate

Day L.S.

0.50 1.43

247.00 1.49 Total: 125.63

Add water charges @ 1% on

Add C.P & OH @15% on 126.89 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 145.92 Rs 145.90

Item Code: 23.8 Spreading sludge, dump manure and good earth. Code

0114 9999

Description Details of cost for 100sqm. Labour: Beldar Sundries

Details of Cost for : 1.00 Cum Unit Quantity

Day L.S.

0.07 0.52

Add water charges @ 1% on

Rate

247.00 1.49 Total: 18.06

Add C.P & OH @15% on 18.24 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 20.98 Rs 21.00

Item Code: 23.9 Mixing earth and sludge or manure in proportion. Code 0114 0115

Description LABOUR: Beldar Coolie

Details of Cost for : 10.00 Cum Unit Quantity Day Day

0.25 0.25

Add water charges @ 1% on

Rate 247.00 247.00 Total: 123.50

Add C.P & OH @15% on 124.74 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 14.35 Rs 14.35

Item Code: 23.10.1 Grassing of `Doob' grass i/c watering and maintenance of lawn for 30 days or more: In rowa 15 cm apart. Details of Cost for : 100.00 Sqm Code Description Unit Quantity LABOUR: 0114 Beldar Day 0.80 0115 Coolie Day 1.60 9999 Sundries L.S. 6.76 Add water charges @ 1% on

DSR-12

Rate 247.00 247.00 1.49 Total: 602.87

Page 1080 of 2298

Add C.P & OH @15% on 608.90 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 700.24 Rs 700.25

Item Code: 23.10.2 Grassing of `Doob' grass i/c watering and maintenance of lawn for 30 days or more: In rows 7.5 cm apart. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Details of cost for 100sqm. Labour: 0114 Beldar Day 0.80 0115 Coolie Day 1.00 9999 Sundries L.S. 6.76 Add water charges @ 1% on

Rate

247.00 247.00 1.49 Total: 454.67

Add C.P & OH @15% on 459.22 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 528.10 Rs 528.10

Item Code: 23.11 Renovating lawns i/c weeding, cheeling the grass, forking the ground, top dressing with sludge or manure. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Details of cost for 100sqm. Labour: 0114 Beldar Day 2.70 0115 Coolie Day 2.00 9999 Sundries L.S. 2.73 Add water charges @ 1% on

Rate

247.00 247.00 1.49 Total: 1164.97

Add C.P & OH @15% on 1176.62 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 1353.11 Rs 1353.10

Item Code: 23.12 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking. Details of Cost for : 100.00 Sqm Code Description Unit Quantity Rate 1. Labour for trenching to a depth of 30cm0114 Beldar Day 1.50 247.00 0115 Coolie Day 0.75 247.00 2. Labour for forking to remove weeds and rank vegetation0114 0115

0114

DSR-12

Beldar Coolie 3. Labour for trenching to a further depth of 30cmBeldar

Day Day

1.00 0.50

247.00 247.00

Day

2.13

247.00

Page 1081 of 2298

0115

0114 0115 9999 0114 9999 0114 9999 9999

Coolie Day 4. Removal of weeds from the trenched area with 10 to 15 days of its flooding with water as per item No. 23.6 Beldar Day Coolie Day Sundries L.S. 5. Rough dressing as per item No. 23.5 Beldar Day Sundries L.S. 6. Fine dressing as per item No. 23.7 Beldar Day Sundries L.S. Sundries L.S.

1.06

247.00

0.33 0.33 2.73

247.00 247.00 1.49

0.20 1.43

247.00 1.49

0.50 1.43 6.76

247.00 1.49 1.49 Total: 2068.50

Add water charges @ 1% on

Add C.P & OH @15% on 2089.19 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 2402.57 Rs 2402.55

Item Code: 23.13 Preparation of beds for hedg- ing and shrubbery by excavat- ing 60 Cm deep and trenching refilling the excavated earth after breaking clods & mixing with sludge or manure in the ratio of 8 : 1.

Code 0114 0115

Details of Cost for : 10.00 Cum Unit Quantity

Description LABOUR: Beldar Coolie

Day Day

1.80 1.25

Add water charges @ 1% on

Rate 247.00 247.00 Total: 753.35

Add C.P & OH @15% on 760.88 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 87.50 Rs 87.50

Item Code: 23.14.1 Digging holes in ordinary soil and refilling the same with 2 : 1 (2 earth : 1 manure): Holes 1.2 m & 1.2 m deep.

Code

02.008.01

Description Details of cost for one holeExtra Excavation22/7x(1.2)^2 /4x1.2 = 1.36 cum. E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Refilling mixture and flooding

Details of Cost for : 1.00 No. Unit Quantity

L.S.

Rate

1.36

130.78

5.20

1.49 Total: 7.75

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 7.83 Cost for 1.00 No. Rate per Each:

DSR-12

Rs 186.86

Page 1082 of 2298

Rate as per DSR-12:

Rs 186.90

Item Code: 23.14.2 Digging holes in ordinary soil and refilling the same with 2 : 1 (2 earth : 1 manure): Holes 90 cm dia & 90 cm deep.

Code

02.008.01

Description Details of cost for one holeExtra Excavation22x(0.6)^2 /4x0.90=0.57cum E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Refilling mixture and flooding

Details of Cost for : 1.00 No. Unit Quantity

Rate

Cum

0.57

130.78

L.S.

3.25

1.49 Total: 4.84

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 4.89 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 80.16 Rs 80.20

Item Code: 23.14.3 Digging holes in ordinary soil and refilling the same with 2 : 1 (2 earth : 1 manure): Holes 60 cm dia & 60 cm deep.

Code

02.008.01

Description Details of cost for one holeExtra Excavation22x(0.6)^2 /4x0.60=0.17cum E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Refilling mixture and flooding

Details of Cost for : 1.00 No. Unit Quantity

L.S.

Rate

0.17

130.78

1.43

1.49 Total: 2.13

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 2.15 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 24.70 Rs 24.70

Item Code: 23.14.4 Digging holes in ordinary soil and refilling the same with 2 : 1 (2 earth : 1 manure): Holes 45 cm dia & 45 cm deep.

Code

DSR-12

02.008.01

Description Details of cost for one holeExtra Excavation22x(0.6)^2 /4x0.45=0.07cum E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Refilling mixture and flooding

Details of Cost for : 1.00 No. Unit Quantity

Rate

Cum

0.07

130.78

L.S.

0.88

Add water charges @ 1% except on [A] i.e on

1.49 Total: 1.31

Add C.P & OH @15% except on [A] i.e on

1.32

Page 1083 of 2298

Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 10.67 Rs 10.70

Item Code: 23.15.1 Half brick circular tree guard in 50 class designation bricks, internal dia. 1.25 m and height 1.2 m above GL. With F.P.S. bricks.

Code

2603 2201 9999 0124 0114 9999

Description Details of cost for one tree guard MATERIALS: Brick 3rd class Carriage of bricks Lime or cement mortar top 3 courses LABOUR: Mason 2nd class Beldar Sundries

Details of Cost for : 1.00 No. Unit Quantity

1000 1000 L.S. Day Day L.S.

Rate

230.00 230.00 15.86

2450.00 233.60 1.49

0.25 0.25 4.16

273.00 247.00 1.49 Total: 777.06

Add water charges @ 1% on

Add C.P & OH @15% on 784.83 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 902.55 Rs 902.55

Item Code: 23.16 P/F M.S. flat iron tree guard 60 Cm dia. and 2 Mtr height above ground level formed of M.S. flats rivetted to flat iron rings.

Code

1008 9999 9999 2205 0103 0114

DSR-12

Description Details of cost for one tree guardMATERIALS : M.S. Flats:- 25x6mm vertical 4x2.25= 9.00m 25x6mm rings 3x(22/7x0.6)+0.16 = 6.14m Total = 15.14m wt. @ 1.2kg per m = 18.17kg. 25x3.00mm verticals 8x2= 16m 16.00x0.25=0.40 sqm. wt. @24.73kg/sqm. = 9.89kg. Total M.S. Flats = 28.06kg + wastage @5% = 1.40kg Total = 29.46kg. Say 0.29 quintal Rivets 36 nos. G.I. Bolts and nuts Crriage of material LABOUR: Blacksmith 2nd class Beldar Painting4x2x0.03x2.0 = 0.496+ 8x2x0.028x2.00 = 0.896+ 2x6.14x0.031 =0.381

Details of Cost for : 1.00 No. Unit Quantity

quint L.S. L.S. tonne Day Day

Rate

0.29 40.30 8.06 0.029

4200.00 1.49 1.49 77.87

2.00 1.00

273.00 247.00

Page 1084 of 2298

13.050.04 13.061.01

Total = 1.773 Say 1.77 sqm. Applying priming coat : With ready mixed red oxide zinc chromate primer on steel work (sec Painting with synthetic enamel paint : Two or more coats on new work

1.77

11.40

1.77

53.87

Add water charges @ 1% except on [A]+[B] i.e on

Total: 2085.32

Add C.P & OH @15% except on [A]+[B] i.e on 2106.17 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2537.63 Rs 2537.60

Item Code: 23.17.1 Making tree guard 53 cm dia. and 1.3 m high as per design from empty coal tar drums supplied free by the Deptt : A coat of coal tar.

Code 9999 9999 9999 0103 0114 9999

13.059

Description Details of cost for one tree guard. Cost of 2 putties Cost of 6mm dia xl0 mm rivets 22 nos Fire wood LABOUR: Blacksmith 2nd class Beldar Sundries Coal tarring alround inside and outside 1/2 x 2 x 22/7 x 0.53 x 1.30 = 2.16. Coal tarring two coats on new work

Details of Cost for : 1.00 No. Unit Quantity

Rate

L.S. L.S. L.S.

13.39 26.91 2.73

1.49 1.49 1.49

Day Day L.S.

0.13 0.07 1.43

273.00 247.00 1.49

2.16

24.55 Total: 119.03

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 120.22 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 191.28 Rs 191.30

Item Code: 23.17.2 Making tree guard 53 cm dia. and 1.3 m high as per design from empty coal tar drums supplied free by the Deptt : Two or more coats of ready mixed paint. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one tree guard. Cost of one free guard 23.017.01 Making tree guard 53 cm dia. and 1.3 m high as per design 1.00 191.28 from empty coal tar drums suppli Priming coat 13.050.03 Applying priming coat : With ready mixed red oxide zinc 2.16 20.72 chromate primer on steel galvanise Painting with synthetic enamel paint 13.061.01 Painting with synthetic enamel paint : Two or more coats on 2.16 53.87 new work 13.059 Coal tarring two coats on new work -2.16 24.55 Total: Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on 0.00

DSR-12

Page 1085 of 2298

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 0.00 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 299.37 Rs 299.30

Item Code: 23.18.1 Making tree guard 53 Cm dia. and 2 Mtr high as per design from empty coal tar drums supplied free by the Deptt : A coat of coal tar. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one tree guard9999 Cost of two M.S. sheet rings 50x0.5mm L.S. 13.52 1.49 9999 Cost of 6mm dia. rivets 10mm long 50 Nos. L.S. 67.21 1.49 9999 Fire wood L.S. 2.73 1.49 LABOUR : 0103 Blacksmith 2nd class Day 0.19 273.00 0114 Beldar Day 0.10 247.00 9999 Sundries L.S. 1.43 1.49 4 legs of M.S. flat 30x3mm including riveting and other end sharpened for easing fixing the tree guard in the ground 4 legs 0.4 each = 1.6m. 1.6x0.032=0.501sqm. @ 24.73kg/sqm. =1.26 kg = 0.013q 1008 Cost of M.S.flat quint 0.013 4200.00 Carriage of M.S. flats (negligible) Coal tarring alround inside and outside. 1/2x2x22/7x0.53x2.0 = 3.33sqm. 13.059 Coal tarring two coats on new work 3.33 24.55 Total: Add water charges @ 1% except on [A] i.e on 257.65 Add C.P & OH @15% except on [A] i.e on 260.23 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 381.01 Rs 381.00

Item Code: 23.18.2 Making tree guard 53 Cm dia. and 2 Mtr high as per design from empty coal tar drums supplied free by the Deptt :

Code 23.018.01

13.050.03

13.061.01

13.059

Details of Cost for : 1.00 No. Description Unit Quantity Details of cost for one tree guardMaking tree guard 53 Cm dia. and 2 Mtr high as per design 1.00 from empty coal tar drums suppli Applying priming coat 1/2 x 2 x 22/7 x 0.53 x 2 = 3.33 sqm Applying priming coat : With ready mixed red oxide zinc 3.33 chromate primer on steel galvanise Painting with synthetic enamel paint Painting with synthetic enamel paint : Two or more coats on 3.33 new work Less cost of coal tarring Coal tarring two coats on new work -3.33 Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

DSR-12

Rate 381.01

20.72

53.87

24.55 Total: 0.00

Page 1086 of 2298

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 0.00 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 547.65 Rs 547.50

Item Code: 23.19.1 Edging with bricks laid dry length wise - Common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code 2602 2201 0124 0115 9999

Details of Cost for : 10.00 m Unit Quantity

Description MATERIALS: Common burnt clay F.P.S. (non modular) bricks class designation7.5 Carraige of Bricks LABOUR: Mason (brick layer) 2nd class Coolie Earth work in excavation and removal of rubbish (or spreading and dressing neatly of surpl

Rate

1000

50.00

2900.00

1000

50.00

233.60

Day Day L.S.

0.05 0.05 13.52

273.00 247.00 1.49

Add water charges @ 1% on

Total: 202.82

Add C.P & OH @15% on 204.85 Cost for 10.00 m Rate per One Metre: Rate as per DSR-12:

Rs 23.56 Rs 23.55

Item Code: 23.20 Filling mixture of earth and sludge or manure. Code 0114 0115

Description LABOUR: Beldar Coolie

Details of Cost for : 10.00 Cum Unit Quantity Day Day

0.17 0.08

Add water charges @ 1% on

Rate 247.00 247.00 Total: 61.75

Add C.P & OH @15% on 62.37 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 7.17 Rs 7.15

Item Code: 23.21 Code 0114 0115

Description LABOUR: Beldar Coolie

Details of Cost for : 1.00 Cum Unit Quantity Day Day

0.35 0.35

Add water charges @ 1% on

Rate 247.00 247.00 Total: 172.90

Add C.P & OH @15% on 174.63 Cost for 1.00 Cum

DSR-12

Page 1087 of 2298

Rate per One Cum: Rate as per DSR-12:

Rs 200.82 Rs 200.80

Item Code: 23.22 Code 0114 0115

Description LABOUR: Beldar Coolie

Details of Cost for : 1.00 Cum Unit Quantity Day Day

0.43 0.35

Add water charges @ 1% on

Rate 247.00 247.00 Total: 192.66

Add C.P & OH @15% on 194.59 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 223.78 Rs 223.80

Item Code: 23.23 Excavation in water bound macadam road. Code 0114 0115

Description LABOUR: Beldar Coolie

Details of Cost for : 1.00 Cum Unit Quantity Day Day

0.53 0.43

Add water charges @ 1% on

Rate 247.00 247.00 Total: 237.12

Add C.P & OH @15% on 239.49 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 275.41 Rs 275.40

Item Code: 23.24 Code 0114 9999

Description Beldar Sundries

Details of Cost for : 100.00 Sqm Unit Quantity Day 0.17 L.S. 35.88 Add water charges @ 1% on

Rate 247.00 1.49 Total: 95.45

Add C.P & OH @15% on 96.40 Cost for 100.00 Sqm Rate per 100 Sqm: Rate as per DSR-12:

Rs 110.86 Rs 110.85

Item Code: 23.25 Supplying and stacking of well decayed cow dung manure at site including royalty and carriage upto 1 km (Cow dung manure measured in stacks will reduced by 8% for Payment) Details of Cost for : 1.00 Cum Code Description Unit Quantity Rate 0303 Cow Dung Cum 1.00 47.00 2242 Carraige of Dump manure cum 1.00 95.22 Total:

DSR-12

Page 1088 of 2298

Add water charges @ 1% on

142.22

Add C.P & OH @15% on 143.64 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 165.19 Rs 128.95

Item Code: 23.26 Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level.. Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one tree guard (Ref. Fig. 1 of Tree Guard) (a)MS Angle iron 25x25x3 mm Verticle 4x1.60 mtrs= 6.40 mtrs 6.40 mtrs. @ 1.10 kg. / per mtr.=7.04 kg. (b)MS Flat 25x3 mm Verticle 2x4x1.20 mtrs.= 9.60 mtrs 9,60 @ 0.60kg / per mtr.=5.76 kg. (c) MS Flat 25x6 mm Horizontal 4x4x0.45 mtrs.= 7.20 mtrs 7.20 @ 1.20 kgl per mtr.=8.64 kg. (d)MS Sheet 1.00 mm thick 1x250x100 mm = 0.025 sqm. 0.025 sqm. @ 7.85 kg l per sqm.=0.20 kg Quantity (a+b+c+d) = 7.04+5.76+8.64+0.20= 21.64 kg Say 0.216 Qtl. 10.002 Structural steel work riveted, bolted or welded in builtup Kg 21.60 66.52 sections, trusses etc ..and app 2205 Carraige of Steel tonne 0.0216 77.87 2) Painting (e) M.S. Angle 25x25x3 mm Verticle 2x2(6.40x0.025) = 0.64 sqm. (f) M.S. Flat Verticle / Horizontal 2x 9.60 +7.20 x 0.025 = 0.84 sqm. (g) M. S. Sheet 1x2x0.25 x 0.10 = 0.05 sqm. Total Area for primer & painting (e+f+g) 0.64+0.84+0.05 =1.53 sqm 13.061.01

0114

Painting with synthetic enamel paint : Two or more coats on Sqm new work LABOUR: For fixing Beldar Day

1.53

53.87

0.07

247.00 Total: 18.97

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 19.16 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

DSR-12

Rs 1541.28 Rs 1540.85

Page 1089 of 2298

Item Code: 23.27 Providing and fixing M. S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below ground level... Details of Cost for : 1.00 No. Code Description Unit Quantity Rate Details of cost for one tree guard (Ref. Fig. 2 of Tree Guard) (a)MS Angle iron 25x25x5 mm Verticle 4x1.9O mtrs = 7.60 mtrs 7.60 mtrs. @ 1.80 kg. I per mtr.=13.68 Kg (b) MS Flat 25x5 mm Verticle 2x4x1.40 mtrs.= 11.20 mtrs 11.20 @ 1.00kg I per mtr.= 11.20 kg (c)MS Flat 25x6 mm Horizontal 4x4x0.50 mtrs.= 8.00 mtrs 8 mtrs. @ 1.20 kg / per mtr.= 9.60 kg (d)MS Sheet 1.00 mm thick 1x250x100 mm = 0.025 sqm. 0.025 sqm. @ 7.85 kg / per sqm.= 0.20 kg Structural steel work welded in built up section: (a+b+c+d) =13.68+11.20+9.60+0.20= 34.68 kg = 0.3468 Qtl. Say 34.68 kg 10.002

Structural steel work riveted, bolted or welded in builtup Kg sections, trusses etc ..and app (e) M. S. Angle Verticle 2x2(7.60x0.025)= 0.76 sqm. (f) M. S. flat Verticle / Horizontal 2x19.20x 0.025 = 0.96 sqm. (g) M. S. Sheet M. S. Sheet 1x2x025x 0.10 = 0.05 sqm. Total area for primer & painting = e+f+g= 1.77 sqm

13.061.01

Painting with synthetic enamel paint : Two or more coats on Sqm new work LABOUR: For fixing Beldar Day

0114

34.68

66.52

1.77

53.87

0.07

247.00 Total: 17.29

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on 17.46 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 2422.34 Rs 2401.60

Item Code: 23.28 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc..

Code 0114 0115 0101

DSR-12

Description LABOUR: Beldar Coolie Bhisti

Details of Cost for : 10.00 Cum Unit Quantity Day Day Day

2.20 3.60 0.40

Rate 247.00 247.00 260.00

Page 1090 of 2298

9999

Sundries

L.S.

1.36

Add water charges @ 1% on

1.49 Total: 1538.63

Add C.P & OH @15% on 1554.02 Cost for 10.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 178.71 Rs 178.70

Item Code: 23.29.1 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 - Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm. Details of Cost for : 1.00 No. Unit Quantity

Code

Description Details of cost for one pot MATERIAL: M.S. wire 3.5 mm dia 8 vertical wire 8 X 0.35= 2.80 mtr. 3 Horizontal wire 3 x 3.14 x 0.3 (av)= 2.83 Total = 5.63 Add wastage @ 5% = 0.28 Total = 5.91 5.91 Mtr. @ 0.08 Kg! M = 0.4728 Say 0.47 Kg

05.022.01

Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensi Reinforced cement concrete work Cement concrete 1:2:4 Area= (1/2) x[(3.14x 0.35)+ (3.14 x 0.25])x 0.35+3.14x 0.125 x 0.125 = 0.3787 say 0.379 s m. Tlhickness of Pots 2.54 cm or 0.0254 m Cubical volume 0.379 x 0.0254 = 0.0096 Say = 0.010 cum P/L specified grade of RCC excluding centering, shuttering, finishing and reinforcement Neat cement punning Centering and shuttering .. .. : Small lintels not exceeding 1.5m clear span, moulding as

05.001.03 13.018 05.009.15

Rate

Kg

0.47

56.77

Cum

0.01

4703.91

Sqm Sqm

0.379 0.38

31.12 166.88

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 0.00

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 0.00 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 148.92 Rs 148.30

Item Code: 23.29.2 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 - Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm

Code

Description

Details of Cost for : 1.00 No. Unit Quantity

Rate

MATERIALS: Details of cost for one pot

DSR-12

Page 1091 of 2298

M.S. wire 3.5 mm dia 8 vertical wire 8 X 0.30= 2.40 3Horizontal wire 3x3.14x0.25(av)= 2.36 Total = 4.76 Add wastage @ 5%= 0.24 Total = 5.00 5.00 Mtr.@ 0.08 Kg! M=0.40 Say 0.40 Kg 05.022.01

Reinforcement for R.C.C. work all complete. -Upto plinth level Kg Mild steel and Medium Tensi Reinforced cement concrete work Cement concrete 1:2:4 Area= (1!2)x((3.14x 0.30) + (3.14 x 0.2))x 0.30+3.14x 0.10 x 0.10 = 0.2669 say 0.267 sqm. Thickness of Pots 2.54 cm or 0.0254 m Cubical volume 0.267 x 0.0254 = 0.00678 Say = 0.007 cum

05.001.03

P/L specified grade of RCC excluding centering, shuttering, Cum finishing and reinforcement Neat cement punning Sqm Centering and shuttering .. .. : Small lintels not exceeding Sqm 1.5m clear span, moulding as

13.018 05.009.15

0.40

56.77

0.007

4703.91

0.267 0.27

31.12 166.88

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 0.00

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 0.00 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 109.01 Rs 109.00

Item Code: 23.30.1 Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 .. Top inner width 35 cm, outer bottom width 25 cm, total height 35 cm and wall thickness 25.4 mm.

Description Details of cost for one pot MATERIALS: M.S. wire 3.5 mm dia 8 vertical wire8 X 0.85= 2.80 3 Horizontal wire 3 x 3.14 x 0.3 (av)= 2.83 Total = 5.63 Add wastage @ 5%= 0.28 Total = 5.91 5.91 Mtr. @ 0.08 Kg! M =0.4728 Say 0.47Kg

05.022.01

Reinforcement for R.C.C. work all complete. -Upto plinth level Kg Mild steel and Medium Tensi Reinforced cement concrete work Area= (1x0.25x0.25)+4x(1/2)(O.35+0.25)x.35=0.4825 sqm. Say 0.483 sqm Thickness of Pots 2.54 cm or 0.0254 m Cubicel volume 0.483 x 0.0254 = 0.0123 cum P/L specified grade of RCC excluding centering, shuttering, Cum finishing and reinforcement -

05.001.03

DSR-12

Details of Cost for : 1.00 No. Unit Quantity

Code

Rate

0.47

56.77

0.0123

4703.91

Page 1092 of 2298

13.018 05.009.15

Neat cement punning Sqm Centering and shuttering .. .. : Small lintels not exceeding Sqm 1.5m clear span, moulding as

0.483 0.48

31.12 166.88

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total: 0.00

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on 0.00 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 179.67 Rs 179.65

Item Code: 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. All types of soil - 300 mm dia. Details of Cost for : 35.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 1.00 7500.00 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0114 Beldar Day 2.00 247.00 0113 Chowkidar Day 1.00 247.00 Total: Add water charges @ 1% on 10815.76 Add C.P & OH @15% on 10923.92 Cost for 35.00 m Rate per One Metre: Rate as per DSR-12:

Rs 358.93 Rs 358.90

Item Code: 24.1.1.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. All types of soil - 350 mm dia. Details of Cost for : 32.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 1.00 7500.00 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0114 Beldar Day 2.00 247.00 0113 Chowkidar Day 1.00 247.00 Total:

DSR-12

Page 1093 of 2298

Add water charges @ 1% on

10815.76

Add C.P & OH @15% on 10923.92 Cost for 32.00 m Rate per One Metre: Rate as per DSR-12:

Rs 392.58 Rs 392.60

Item Code: 24.1.1.3 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. All types of soil - 400 mm dia. Details of Cost for : 25.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 1.00 7500.00 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0114 Beldar Day 2.00 247.00 0113 Chowkidar Day 1.00 247.00 Total: Add water charges @ 1% on 10815.76 Add C.P & OH @15% on 10923.92 Cost for 25.00 m Rate per One Metre: Rate as per DSR-12:

Rs 502.50 Rs 502.50

Item Code: 24.1.2.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. Rocky strata including Boulders - 300 mm dia. Details of Cost for : 16.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 0.90 7500.00 Extra diesel required for boring in rocky strata 1235 Diesel oil litre 6.00 41.29 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0134 Rock Hole Driller Day 0.75 247.00 0114 Beldar Day 3.00 247.00 0103 Blacksmith 2nd class Day 0.75 273.00 0113 Chowkidar Day 1.00 247.00 Total:

DSR-12

Page 1094 of 2298

Add water charges @ 1% on

10950.50

Add C.P & OH @15% on 11060.01 Cost for 16.00 m Rate per One Metre: Rate as per DSR-12:

Rs 794.94 Rs 797.90

Item Code: 24.1.2.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. Rocky strata including Boulders - 350 mm dia. Details of Cost for : 16.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 0.90 7500.00 Extra diesel required for boring in rocky strata 1235 Diesel oil litre 8.00 41.29 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0134 Rock Hole Driller Day 1.00 247.00 0114 Beldar Day 4.00 247.00 0103 Blacksmith 2nd class Day 0.75 273.00 0113 Chowkidar Day 1.00 247.00 Total: Add water charges @ 1% on 11341.83 Add C.P & OH @15% on 11455.25 Cost for 16.00 m Rate per One Metre: Rate as per DSR-12:

Rs 823.35 Rs 827.30

Item Code: 24.1.2.3 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. Rocky strata including Boulders - 400 mm dia. Details of Cost for : 16.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 0.90 7500.00 Extra diesel required for boring in rocky strata 1235 Diesel oil litre 16.00 41.29 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0134 Rock Hole Driller Day 1.20 247.00

DSR-12

Page 1095 of 2298

0114 0103 0113

Beldar Blacksmith 2nd class Chowkidar

Day Day Day

8.00 0.75 1.00

Add water charges @ 1% on

247.00 273.00 247.00 Total: 12709.55

Add C.P & OH @15% on 12836.65 Cost for 16.00 m Rate per One Metre: Rate as per DSR-12:

Rs 922.63 Rs 927.35

Item Code: 24.2.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) ..All types of soil - 300 mm dia. Details of Cost for : 30.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 1.00 7500.00 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0114 Beldar Day 2.00 247.00 0113 Chowkidar Day 1.00 247.00 Total: Add water charges @ 1% on 10815.76 Add C.P & OH @15% on 10923.92 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 418.75 Rs 418.75

Item Code: 24.2.1.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) ..All types of soil 350 mm dia. Details of Cost for : 27.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 1.00 7500.00 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0114 Beldar Day 2.00 247.00 0113 Chowkidar Day 1.00 247.00 Total:

DSR-12

Page 1096 of 2298

Add water charges @ 1% on

10815.76

Add C.P & OH @15% on 10923.92 Cost for 27.00 m Rate per One Metre: Rate as per DSR-12:

Rs 465.28 Rs 465.30

Item Code: 24.2.1.3 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) ..All types of soil 400 mm dia. Details of Cost for : 20.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 1.00 7500.00 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0114 Beldar Day 2.00 247.00 0113 Chowkidar Day 1.00 247.00 Total: Add water charges @ 1% on 10815.76 Add C.P & OH @15% on 10923.92 Cost for 20.00 m Rate per One Metre: Rate as per DSR-12:

Rs 628.13 Rs 628.10

Item Code: 24.2.2.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), .. .. Rocky strata including Boulders - 300 mm dia. Details of Cost for : 16.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 0.90 7500.00 Extra diesel required for boring in rocky strata 1235 Diesel oil litre 10.00 41.29 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0134 Rock Hole Driller Day 1.00 247.00 0114 Beldar Day 5.00 247.00 0103 Blacksmith 2nd class Day 0.70 273.00 0113 Chowkidar Day 1.00 247.00 Total:

DSR-12

Page 1097 of 2298

Add water charges @ 1% on

11657.76

Add C.P & OH @15% on 11774.34 Cost for 16.00 m Rate per One Metre: Rate as per DSR-12:

Rs 846.28 Rs 851.20

Item Code: 24.2.2.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), .. .. Rocky strata including Boulders - 350 mm dia. Details of Cost for : 16.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 0.90 7500.00 Extra diesel required for boring in rocky strata 1235 Diesel oil litre 12.00 41.29 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0134 Rock Hole Driller Day 1.00 247.00 0114 Beldar Day 6.00 247.00 0103 Blacksmith 2nd class Day 0.75 273.00 0113 Chowkidar Day 1.00 247.00 Total: Add water charges @ 1% on 12000.99 Add C.P & OH @15% on 12121.00 Cost for 16.00 m Rate per One Metre: Rate as per DSR-12:

Rs 871.20 Rs 875.10

Item Code: 24.2.2.3 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), .. .. Rocky strata including Boulders - 400 mm dia. Details of Cost for : 14.00 m Code Description Unit Quantity Rate 0020 Hydraulic Excavator (3D) with driver and fuel. Day 0.95 7500.00 Extra diesel required for boring in rocky strata 1235 Diesel oil litre 16.00 41.29 0005 Hire charges of Diesel Truck - 9 tonne Day 0.4286 1600.00 Transportation charges for to and fro to site (assume 140m of bore for one shifting) (2 x30)/140 Loading, unloading &Errection charges of drilling Rig Machine 0114 Beldar Day 4.00 247.00 0130 Mistry Day 1.00 301.00 7763 Water supply tanker of 5000 litre capacity Nos 1.00 600.00 Extra labour to assist M/C operator & security 0134 Rock Hole Driller Day 1.20 247.00

DSR-12

Page 1098 of 2298

0114 0103 0113

Beldar Blacksmith 2nd class Chowkidar

Day Day Day

8.00 1.00 1.00

Add water charges @ 1% on

247.00 273.00 247.00 Total: 13152.80

Add C.P & OH @15% on 13284.33 Cost for 14.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1091.21 Rs 1096.60

Item Code: 24.3.1 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe .. - 100 mm nominal size dia. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIALS: 7758 uPVC blind pipe 100 mm dia as per IS: 12818 m 100.00 385.00 2321 Carraige of Spun iron S & S pipes 150 mm dia 100 m 50.00 319.12 Qty = 50 to consider 50% of carriage as per 2321 LABOUR: For lowering 0114 Beldar Day 0.50 247.00 0115 Coolie Day 0.50 247.00 Total: Add water charges @ 1% on 38906.56 Add C.P & OH @15% on 39295.63 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 451.90 Rs 452.00

Item Code: 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe .. - 150 mm nominal size dia. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIALS: 7745 PVC blind pipe 150 mm dia as per IS: 12818 m 100.00 460.00 2321 Carraige of Spun iron S & S pipes 150 mm dia 100 m 50.00 319.12 Qty = 50 to consider 50% of carriage as per 2321 LABOUR: For lowering 0114 Beldar Day 0.50 247.00 0115 Coolie Day 0.50 247.00 9999 Sundries (Adhesive etc.,) L.S. 10.07 1.49 Total: Add water charges @ 1% on 46421.56 Add C.P & OH @15% on 46885.78 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

DSR-12

Rs 539.19 Rs 539.15

Page 1099 of 2298

Item Code: 24.3.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe .. - 200 mm nominal size dia. Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIALS: 7746 PVC blind pipe 200 mm dia as per IS: 12818 m 100.00 834.75 2322 Carraige of Spun iron S & S pipes 200 mm dia 100 m 50.00 519.11 Qty = 50 to consider 50% of carriage as per 2322 LABOUR: For lowering 0114 Beldar Day 0.50 247.00 0115 Coolie Day 0.50 247.00 Total: Add water charges @ 1% on 83981.56 Add C.P & OH @15% on 84821.38 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 975.45 Rs 975.80

Item Code: 24.4.1 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes .. .. 100 mm nominal size dia Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIALS: 7759 uPVC slotted pipe 100 mm dia as per IS: 12818 m 100.00 390.00 2321 Carraige of Spun iron S & S pipes 150 mm dia 100 m 50.00 319.12 Qty = 50 to consider 50% of carriage as per 2321 LABOUR: For lowering 0114 Beldar Day 0.50 247.00 0115 Coolie Day 0.50 247.00 9999 Sundries (Adhesive etc.,) L.S. 10.07 1.49 Total: Add water charges @ 1% on 39421.56 Add C.P & OH @15% on 39815.78 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 457.88 Rs 457.80

Item Code: 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes .. .. 150 mm nominal size dia Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIALS: 7751 PVC slotted pipe 150 mm dia as per IS: 12818 m 100.00 465.15 2321 Carraige of Spun iron S & S pipes 150 mm dia 100 m 50.00 319.12 Qty = 50 to consider 50% of carriage as per

DSR-12

Page 1100 of 2298

0114 0115 9999

2321 LABOUR: For lowering Beldar Coolie Sundries (Adhesive etc.,)

Day Day L.S.

0.50 0.50 10.07

Add water charges @ 1% on

247.00 247.00 1.49 Total: 46936.56

Add C.P & OH @15% on 47405.93 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 545.17 Rs 544.15

Item Code: 24.4.3 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes .. .. 200 mm nominal size dia Details of Cost for : 100.00 m Code Description Unit Quantity Rate MATERIALS: 7752 PVC slotted pipe 200 mm dia as per IS: 12818 m 100.00 840.00 2322 Carraige of Spun iron S & S pipes 200 mm dia 100 m 50.00 519.11 Qty = 50 to consider 50% of carriage as per 2322 LABOUR: For lowering 0114 Beldar Day 0.50 247.00 0115 Coolie Day 0.50 247.00 9999 Sundries (Adhesive etc.,) L.S. 13.42 1.49 Total: Add water charges @ 1% on 84526.56 Add C.P & OH @15% on 85371.83 Cost for 100.00 m Rate per One Metre: Rate as per DSR-12:

Rs 981.78 Rs 971.70

Item Code: 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness ..

Code 7753 0114 9999

Description MATERIALS: Boulder 50 mm to 200 mm Beldar Sundries

Details of Cost for : 1.00 Cum Unit Quantity Cum Day L.S.

1.00 0.25 1.00

Add water charges @ 1% on

Rate 332.00 247.00 1.49 Total: 395.24

Add C.P & OH @15% on 399.19 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

DSR-12

Rs 459.07 Rs 459.05

Page 1101 of 2298

Item Code: 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders ..

Code 7754 0114 9999

Description MATERIALS: Gravel 5 mm to 10 mm (including carriage) Beldar Sundries

Details of Cost for : 1.00 Cum Unit Quantity Cum Day L.S.

1.00 0.25 1.00

Add water charges @ 1% on

Rate 650.00 247.00 1.49 Total: 713.24

Add C.P & OH @15% on 720.37 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 828.43 Rs 828.45

Item Code: 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit.. Details of Cost for : 1.00 Cum Code Description Unit Quantity MATERIALS: 7755 Gravel 1.5 mm to 2 mm (including carriage) Cum 1.00 0114 Beldar Day 0.25 9999 Sundries L.S. 1.00 Add water charges @ 1% on

Rate 625.00 247.00 1.49 Total: 688.24

Add C.P & OH @15% on 695.12 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 799.39 Rs 799.40

Item Code: 24.8 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse ..

Code 7772 0114 9999

Description MATERIALS: Pea Gravel (including carriage) Beldar Sundries

Details of Cost for : 1.00 Cum Unit Quantity Cum Day L.S.

1.00 0.30 1.00

Add water charges @ 1% on

Rate 650.00 247.00 1.49 Total: 725.59

Add C.P & OH @15% on 732.85 Cost for 1.00 Cum Rate per One Cum: Rate as per DSR-12:

Rs 842.78 Rs 842.80

Item Code: 24.9 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm .. Details of Cost for : 1.00 No.

DSR-12

Page 1102 of 2298

Code

7762 9999

Description Details of cost for One No. RCC drain cover MATERIALS: Precast R.C.C. perforated slab Carriage and fixing charges

Unit

Quantity

Rate

Nos L.S.

1.00 15.00

750.00 1.49 Total: 772.35

Add water charges @ 1% on

Add C.P & OH @15% on 780.07 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 897.08 Rs 897.10

Item Code: 24.10.1 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes - 100 mm nominal size dia having minimum wall thickness 5.00 mm

Code 7757 7764 2343

13.065.01

0114 0130

Details of Cost for : 30.00 m Unit Quantity

Description MATERIALS: M.S. pipe 100 mm dia casing pipe M.S. socket 100 mm dia Carraige of Ductile iron pipes (k7) 100 mm dia including loading and unloading Painting with Anticorrosive Paint 3.14 x.11 x30.00=10.36 sqm.

m m 100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm more coats on new work. LABOUR: Beldar Day Mistry Day

Rate

30.00 5.00 30.00

750.00 165.00 191.48

10.36

44.56

1.35 0.50

247.00 301.00 Total: 23866.39

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 24105.05 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 939.42 Rs 950.00

Item Code: 24.10.2 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes - 150 mm nominal size dia having minimum wall thickness 5.00 mm

Code 7743 7765 2344

13.065.01

DSR-12

Description MATERIALS: M.S. pipe 150 mm dia casing pipe M.S. socket 150 mm dia Carraige of Cast iron pipes 150 mm dia including loading and unloading Painting with Anticorrosive Paint 3.14 x0.16x30.00=15.07 sqm. Painting with black anti-corrosive bitumastic paint : Two or more coats on new work. LABOUR:

Details of Cost for : 30.00 m Unit Quantity

Rate

m Nos 100 m

30.00 5.00 30.00

1042.00 200.00 319.12

Sqm

15.07

44.56

Page 1103 of 2298

0114 0130

Beldar Mistry

Day Day

1.40 0.50

Add water charges @ 1% except on [A] i.e on

247.00 301.00 Total: 32852.04

Add C.P & OH @15% except on [A] i.e on 33180.56 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1294.31 Rs 1297.90

Item Code: 24.10.3 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes - 200 mm nominal size dia having minimum wall thickness 5.40 mm

Code 7744 7766 2345

13.065.01

0114 0130

Details of Cost for : 30.00 m Unit Quantity

Description MATERIALS: M.S. pipe 200 mm dia casing pipe M.S. socket 200 mm dia Carraige of Cast iron pipes 200 mm dia including loading and unloading Painting with Anticorrosive Paint 3.14 x 0.21 x 30.00=20.25 sqm.

m Nos 100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm more coats on new work. LABOUR: Beldar Day Mistry Day

Rate

30.00 5.00 30.00

1250.00 250.00 519.11

20.25

44.56

1.35 0.50

247.00 301.00 Total: 39389.68

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 39783.58 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1555.12 Rs 1557.65

Item Code: 24.11.1 Supplying, assembling, lowering and fixing in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted mild steel threaded and socketed / plain bevel ended pipe - 100 mm nominal size dia

Code 7757 7764 9999 2343

13.065.01

0114

DSR-12

Description MATERIALS: M.S. pipe 100 mm dia casing pipe M.S. socket 100 mm dia Extra for making slots Carraige of Ductile iron pipes (k7) 100 mm dia including loading and unloading Painting with Anticorrosive Paint 3.14 x.11 x30.00=10.36 sqm.

Details of Cost for : 30.00 m Unit Quantity m m L.S. 100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm more coats on new work. LABOUR: Beldar Day

Rate

30.00 5.00 906.04 30.00

750.00 165.00 1.49 191.48

10.36

44.56

1.35

247.00

Page 1104 of 2298

0130

Mistry

Day

0.50

Add water charges @ 1% except on [A] i.e on

301.00 Total: 25216.39

Add C.P & OH @15% except on [A] i.e on 25468.55 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 991.68 Rs 1002.30

Item Code: 24.11.2 Supplying, assembling, lowering and fixing in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted mild steel threaded and socketed / plain bevel ended pipe - 150 mm nominal size dia

Code 7743 7765 9999 2344

13.065.01

0114 0130

Description MATERIALS: M.S. pipe 150 mm dia casing pipe M.S. socket 150 mm dia Extra for making slots Carraige of Cast iron pipes 150 mm dia including loading and unloading Painting with Anticorrosive Paint 3.14 x.0.16x30.00=15.07 sqm.

Details of Cost for : 30.00 m Unit Quantity m Nos L.S. 100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm more coats on new work. LABOUR: Beldar Day Mistry Day

Rate

30.00 5.00 1208.05 30.00

1042.00 200.00 1.49 319.12

15.07

44.56

1.40 0.50

247.00 301.00 Total: 34652.03

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on 34998.55 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1364.00 Rs 1373.40

Item Code: 24.11.3 Supplying, assembling, lowering and fixing in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted mild steel threaded and socketed / plain bevel ended pipe - 200 mm nominal size dia

Code 7744 9999 7766 2345

13.065.01

0114

DSR-12

Description MATERIALS: M.S. pipe 200 mm dia casing pipe Extra for making slots M.S. socket 200 mm dia Carraige of Cast iron pipes 200 mm dia including loading and unloading Painting with Anticorrosive Paint 3.14 x 0.21 x 30.00=20.25 sqm.

Details of Cost for : 30.00 m Unit Quantity m L.S. Nos 100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm more coats on new work. LABOUR: Beldar Day

Rate

30.00 1208.05 5.00 30.00

1250.00 1.49 250.00 519.11

20.25

44.56

1.40

247.00

Page 1105 of 2298

0130

Mistry

Day

0.50

Add water charges @ 1% except on [A] i.e on

301.00 Total: 41202.02

Add C.P & OH @15% except on [A] i.e on 41614.04 Cost for 30.00 m Rate per One Metre: Rate as per DSR-12:

Rs 1625.28 Rs 1627.80

Item Code: 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor..

Code 0040 1235

Details of Cost for : 8.00 Nos Description Unit Quantity Air compressor 250 cfm with two leads for pneumatic cutters/ day 1.00 hammers Diesel oil litre 48.00 Add water charges @ 1% on

Rate 1800.00 41.29 Total: 3781.92

Add C.P & OH @15% on 3819.74 Cost for 8.00 Nos Rate per Each: Rate as per DSR-12:

Rs 549.09 Rs 549.10

Item Code: 24.13.1 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe..100 mm dia Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 100mm dia with screwed cap with locking arrangement 7760 M.S. cap 100 mm dia Nos 1.00 120.00 7760 Add 5% on above item for labour factor Nos 0.05 120.00 Total: Add water charges @ 1% on 126.00 Add C.P & OH @15% on 127.26 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 146.35 Rs 146.35

Item Code: 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe..150 mm dia Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 150mm dia with screwed cap with locking arrangement 7747 M.S. cap 150 mm dia Nos 1.00 150.00 7747 Add 5% on above item for labour factor Nos 0.05 150.00 Total: Add water charges @ 1% on 157.50

DSR-12

Page 1106 of 2298

Add C.P & OH @15% on 159.08 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 182.94 Rs 182.95

Item Code: 24.13.3 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe..200 mm dia Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 200mm dia with screwed cap with locking arrangement 7748 M.S. cap 200 mm dia Nos 1.00 180.00 7748 Add 5% on above item for labour factor Nos 0.05 180.00 Total: Add water charges @ 1% on 189.00 Add C.P & OH @15% on 190.89 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 219.52 Rs 219.50

Item Code: 24.14.1 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I) - 100 mm clamp Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: Clamps made of MS flat of size 100x10mm thick 1x2mx7.80 kg per metre = 15.60 kg 10.001 Structural steel work in single section fixed with or without Kg 15.60 59.90 connecting plate including a 9999 Sundries, nuts and bolts etc., L.S. 25.00 1.49 Total: Add water charges @ 1% except on [A] i.e on 37.25 Add C.P & OH @15% except on [A] i.e on 37.62 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 977.70 Rs 977.70

Item Code: 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I) - 150 mm clamp Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: Clamps made of MS flat of size 100x10mm thick 1x2.10mx7.80 kg per metre = 16.38 kg 10.001 Structural steel work in single section fixed with or without Kg 16.38 59.90 connecting plate including a 9999 Sundries, nuts and bolts etc., L.S. 30.00 1.49 Total:

DSR-12

Page 1107 of 2298

Add water charges @ 1% except on [A] i.e on

44.70

Add C.P & OH @15% except on [A] i.e on 45.15 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1033.08 Rs 1033.10

Item Code: 24.14.3 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I) - 200 mm clamp Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: Clamps made of MS flat of size 100x10mm thick 1x2.4mx7.80 kg per metre = 18.72 kg 10.001 Structural steel work in single section fixed with or without Kg 18.72 59.90 connecting plate including a 9999 Sundries, nuts and bolts etc., L.S. 30.00 1.49 Total: Add water charges @ 1% except on [A] i.e on 44.70 Add C.P & OH @15% except on [A] i.e on 45.15 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 1173.25 Rs 1173.25

Item Code: 24.15.1 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 100mm Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7761 M.S. bail plug 100 mm dia Nos 1.00 140.00 9999 Sundries L.S. 5.00 1.49 Total: Add water charges @ 1% on 147.45 Add C.P & OH @15% on 148.92 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 171.26 Rs 171.30

Item Code: 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 150mm Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7749 M.S bail plug 150 mm dia Nos 1.00 170.00 9999 Sundries L.S. 5.00 1.49 Total: Add water charges @ 1% on 177.45 Add C.P & OH @15% on

DSR-12

179.22

Page 1108 of 2298

Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 206.10 Rs 206.10

Item Code: 24.15.3 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 200mm Details of Cost for : 1.00 No. Code Description Unit Quantity Rate MATERIALS: 7750 M.S bail plug 200 mm dia Nos 1.00 200.00 9999 Sundries L.S. 5.00 1.49 Total: Add water charges @ 1% on 207.45 Add C.P & OH @15% on 209.52 Cost for 1.00 No. Rate per Each: Rate as per DSR-12:

Rs 240.95 Rs 240.95

Item Code: 25.1 Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means .. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate LABOUR: 0114 Beldar Day 0.53 247.00 0115 Coolie Day 0.08 247.00 0101 Bhisti Day 0.07 260.00 9999 Sundries L.S. 1.43 1.49 Total: Add water charges @ 1% on 171.00 Add C.P & OH @15% on 172.71 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 19.86 Rs 19.85

Item Code: 25.2 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level .. Details of Cost for : 202.50 Sqm Code Description Unit Quantity Rate MATERIALS: Assuming shutterlng material will become unserviceable after use of 40 times Adding for maintenance @ 10% of cost Taking slvage value after full use of material @ 25% of cost

DSR-12

7397

Base Jack Qty taken for cost of using once=14x0.85/40=0.2975

Nos

0.30

180.00

4009

Mild steel tubes hot finished welded type 40mm dia Mild steel tubes

kilog

80.02

48.00

Page 1109 of 2298

Vertical standard 2.5m |ength=7x2x9x2.5= 315.00 m Side support 6.00m length=3x2x6.00=36.00m Horizonatal support 3.00m length=18x3x3.00=162.00m TotaI=1026.00m @ 3.67 kg/m =37S5.42 kg Qty taken for cost of using once= 3765.42x0.85/40=80.02kg 7387

Spigot for standerd jointing 7x2x9=126 nos x 0.40m length =50.40m [email protected] /m=123.98kg Qty taken for cost of using once= 123.98x0.85140=2.63kg

Kg

2.63

45.00

1034

Bolts and nuts up to 300 mm in length for spigot 2x7x2x9=252 nos @ 0.15 kg each=37.80 kg =0.378q Qty taken for cost of using once= 0.378x0.85/40=0.008q

quint

0.008

5400.00

7346

Double coupler Clamp coupler for tixing MS tube with scafolding 2x3x2+2x18x3=120 nos Qty taken for cost of using once= 120x0.85/40=2.55 nos

each

2.55

55.00

7398

Challies 3 nos x 18 |ines=54 nos Two level plate challies=2x18 lines=36 nos Tota|=90 nos Qty taken for cost of using once=90x0.85!40=1.9125 nos

Nos

1.91

800.00

7399

Cup Locks For Vertical standards= (5x7x2x9=630 nos) +(2x18x19=694 nos) Tota|=1314 nos Qty taken for cost of using once= 1314x0.85/40=27.92

Nos

27.92

75.00

2205

Carraige of Steel 40mm dia MS pipe=3765.42kg 25mm spigot=123.98kg Nuts & bo|ts=37.80kg clamp=120 [email protected] each=120.00kg ChaIlies=90 nos @ 15.00kg each=1350.00kg Cup locks=1314 nos @ 0.50kg each= 657.00kg TotaI=6054.20kg=6.054 tonne

tonne

6.054

77.87

0116

Fitter (grade 1) LABOUR: Beldar

Day

15.50

301.00

Day

31.00

247.00

0114

DSR-12

Page 1110 of 2298

9999

Sundries

L.S.

1035.00

Add water charges @ 1% on

1.49 Total: 22154.83

Add C.P & OH @15% on 22376.38 Cost for 202.50 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 127.08 Rs 127.10

Item Code: 25.3 Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 7767 Stone cleaning chemical approved by ASI Ltr 0.10 164.01 1 kg teepal of 3% solution for 10 sqm area 7771

0103 0114 0128 9999

6501 0103 0114 0128

Liquid Amonia 5% LABOUR: For applying the chemical solution Blacksmith 2nd class Beldar Mate (a)Cleaning T & P & its manitinance cost (Jet Pump, electrice cable, horse pipe, waler River Sand Labour (for pressure cleaning) Blacksmith 2nd class Beldar Mate

Ltr

0.17

160.80

Day Day Day

0.20 0.20 0.10

273.00 247.00 260.00

L.S. cum

1.00 0.0283

1.49 500.00

Day Day Day

0.40 0.80 0.10

273.00 247.00 260.00 Total: 522.18

Add water charges @ 1% on

Add C.P & OH @15% on 527.40 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 60.65 Rs 62.70

Item Code: 25.4 Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer .. Details of Cost for : 10.00 Sqm Code Description Unit Quantity Rate MATERIALS: 7775 Sodium pentachlorophenate Kg 0.10 630.00 LABOUR: 0103 Blacksmith 2nd class Day 0.25 273.00 0114 Beldar Day 0.25 247.00 0128 Mate Day 0.125 260.00 Total: Add water charges @ 1% on 225.50 Add C.P & OH @15% on 227.76 Cost for 10.00 Sqm

DSR-12

Page 1111 of 2298

Rate per One Sqm: Rate as per DSR-12:

Rs 26.19 Rs 26.80

Item Code: 25.5 Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ):1/2 marble dust}

Code 03.019 0155 0115 0101 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description

MATERIALS: Mortar in lime , surkhi ( 50% red and 50% light yellow) and Cum marble dust 1:1.5:0.5 Mason (average) Day LABOUR: Coolie Day Bhisti Day Sundries L.S.

Rate

0.023

2004.22

0.92

287.00

1.37 0.93 4.03

247.00 260.00 1.49 Total: 896.33

Add water charges @ 1% on

Add C.P & OH @15% on 905.29 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 104.11 Rs 104.30

Item Code: 25.6 Ruled/ Flush pointing on White sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}

Code 03.019

0155 0115 0101 9999

Details of Cost for : 10.00 Sqm Unit Quantity

Description

MATERIALS: Mortar in lime , surkhi ( 50% red and 50% light yellow) and Cum marble dust 1:1.5:0.5 LABOUR: Mason (average) Day Coolie Day Bhisti Day Sundries L.S.

Rate

0.023

2004.22

0.92 1.37 0.93 4.03

287.00 247.00 260.00 1.49 Total: 896.33

Add water charges @ 1% on

Add C.P & OH @15% on 905.29 Cost for 10.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 104.11 Rs 104.30

Item Code: 25.7 Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-charge ..

Code 7769

DSR-12

Description MATERIALS: Stone surface strengthening chemical approved by ASI

Details of Cost for : 5.00 Sqm Unit Quantity Ltr

1.00

Rate 1017.17

Page 1112 of 2298

0131 0114 9999

LABOUR: Painter Beldar Sundries

Day Day L.S.

0.15 0.15 6.00

Add water charges @ 1% on

273.00 247.00 1.49 Total: 1104.11

Add C.P & OH @15% on 1115.15 Cost for 5.00 Sqm Rate per One Sqm: Rate as per DSR-12:

Rs 256.48 Rs 267.00

Item Code: 25.8 Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge .. Details of Cost for : 45.00 Sqm Code Description Unit Quantity Rate MATERIALS: 7768 Water repallent chemical approved by ASI Ltr 1.00 1586.25 7770 Turpentine oil Ltr 12.00 67.50 LABOUR: 0131 Painter Day 1.00 273.00 0114 Beldar Day 1.00 247.00 9999 Handling / transportation charges L.S. 6.00 1.49 Total: Add water charges @ 1% on 2925.19 Add C.P & OH @15% on 2954.44 Cost for 45.00 Sqm Rate per One Sqm: Rate as per DSR-12:

DSR-12

Rs 75.50 Rs 69.70

Page 1113 of 2298

RMULAS) SR-2012 and DAR-2012 compare both the rates.

ed rate is tallied with that of DAR-2012.

hat of DAR-2012 because, in DAR every p. But both the rates are very close.

ntioned in the item it self.

he post from internet.

are welcome! Please do mail me on y enthusiasm to work more….

DSR-12

Page 1114 of 2298

012

Amount

456.00 3.72 806.40 21.02 42.05 63.07

222.30 117.00 40.10 20.14 1791.80

Amount

498.75 903.00 240.00

222.30 117.00 15.42 7.75 2004.22

Amount

1550.00 24.14 1198.40 93.73

DSR-12

Page 1115 of 2298

185.25 18.20 40.10 20.14 3129.96

Amount

3400.00 52.95 1064.00 83.22

185.25 18.20 40.10 20.14 4863.86

Amount 500.00 87.60 22.23 27.17 637.00

Amount 247.50 34.62 31.40 28.60 205.01 18.03 123.41 147.42

DSR-12

Page 1116 of 2298

182.00 133.38 210.60 18.03 1380.00

Amount

3091.20

2545.75

254.58

608.58 11.52 6511.63

Amount

716.72

DSR-12

Page 1117 of 2298

672.00 220.50 74.46 160.55 148.20 70.20 15.05 13.65 10.40 40.10 20.14 80.19 2242.16

Amount

172.98 0.32

780.78 706.42 1415.31 3075.81

DSR-12

Page 1118 of 2298

Amount 2520.00

180740.16 5579.10

2041.20

6600.00

72000.00

98550.00 368030.46

Amount

1250.00 19.47 684.80 93.73

185.25 18.20 40.10 20.14 2311.69

DSR-12

Page 1119 of 2298

Amount

2550.00 39.71 684.80 93.73

185.25 18.20 40.10 20.14 3631.93

Amount

1900.00 29.59 684.80 93.73

185.25 18.20 40.10 20.14 2971.81

Amount 3400.00 52.95 608.00 83.22 185.25 18.20 40.10 20.14 4407.86

DSR-12

Page 1120 of 2298

Amount

6120.00 39.71 185.25 1070.00 18.20 93.73 60.24

7587.13

Amount 3400.00 52.95 18.20 878.75 40.10 83.22 20.14 185.25 4678.61

Amount

1250.00 19.47 1198.40 93.73

185.25 18.20 40.10 20.14

DSR-12

Page 1121 of 2298

2825.29

Amount

3750.00

0.50

245.13 3995.63

Amount

1900.00 29.59 1198.40 93.73

185.25 18.20 40.10 20.14 3485.41

DSR-12

Page 1122 of 2298

Amount

2550.00 39.71 1198.40 93.73

185.25 18.20 40.10 20.14 4145.53

Amount

54.00 155.61 81.90 9.61 301.12

Amount

8160.00 52.95 950.00 83.22

185.25 18.20 40.10 20.14 9509.86

Amount 1380.00

DSR-12

Page 1123 of 2298

138.00 1518.00

Amount 6511.63 651.16 -3255.82 3906.97

Amount 368030.46 36803.05 -92007.62 312825.89

Amount 97.67 97.67

DSR-12

Page 1124 of 2298

th CP & OH (15%)

Amount 1778.40 1482.00 3260.40 32.60 3293.00 493.95 3786.95

h, .. .., lead upto 50 m and lift upto 1.5 m :

Amount

1457.30 889.20 104.00 1.98 12.00 5.95 0.01 4.07 2474.51 24.75 2499.26 374.89 2874.15

Amount 543.40 889.20 104.00

12.00 1.98 5.95 0.01 4.07

DSR-12

Page 1125 of 2298

1560.61 15.61 1576.22 236.43 1812.65

Amount 1.98 12.00 5.95 0.01 2.71 22.65 0.23 22.88 3.43 26.31

Amount 104.00 104.00 1.04 105.04 15.76 120.80

All kinds of soil Amount

309.38 206.25 104.00 494.00 1113.63

DSR-12

Page 1126 of 2298

11.14 1124.77 168.72 1293.49

Ordinary rock Amount 468.75 106.25 174.14 392.73 87.69 123.50 333.45 16.08 1702.59 17.03 1719.62 257.94 1977.56

(requiring blasting)

Amount 937.50 212.50 261.82 697.78 218.60 111.15 333.45 137.55 60.00 24.02 2994.37 29.94 3024.31 453.65 3477.96

asting prohibited)

DSR-12

Page 1127 of 2298

Amount 937.50 212.50 610.09 1482.00 275.60 47.78 185.25 444.60 24.02 4219.34 42.19 4261.53 639.23 4900.76

Amount 309.38 206.25 104.00 506.35 1125.98 11.26 1137.24 170.59 1307.83

Amount 468.75 106.25 218.60 435.96 130.91 123.50 321.10 20.14 1825.21 18.25 1843.46 276.52 2119.98

DSR-12

Page 1128 of 2298

Amount 937.50 212.50 306.28 741.00 261.82 123.50 321.10 224.70 105.00 28.09 3261.49 32.61 3294.10 494.12 3788.22

Amount 937.50 212.50 654.55 1525.23 275.60 47.78 185.25 370.50 26.73 4235.64 42.36 4278.00 641.70 4919.70

ng 80 mm dia.

DSR-12

Page 1129 of 2298

Amount

11122.84 A 7127.19 B 18250.03 0.00 18250.03 0.00 18250.03

0 mm dia upto 300mm

Amount

11101.91 A 7113.78 B 18215.69 0.00 18215.69 0.00 18215.69

Amount

DSR-12

Page 1130 of 2298

9454.09 A 6057.90 B 15511.99 0.00 15511.99 0.00 15511.99

g 80 mm dia. Amount

18030.60 A 7127.19 B 494.00 25651.79 4.94 25656.73 74.84 25731.57

mm dia not exceeding 300mm

Amount

19843.20 A 7843.68 B 543.40 28230.28 5.43

DSR-12

Page 1131 of 2298

28235.71 82.32 28318.03

Amount

8564.59 A 3385.44 B 232.18 12182.21 2.32 12184.53 35.18 12219.71

Amount

32218.64 A

7127.19 B 617.50 39963.33 6.18 39969.51 93.55 40063.06

DSR-12

Page 1132 of 2298

Amount

35457.55 A

7843.68 B 679.25 43980.48 6.79 43987.27 102.91 44090.18

Amount

15303.95 A

3385.44 B 288.99 18978.38 2.89 18981.27 43.78 19025.05

Amount

DSR-12

Page 1133 of 2298

41842.05 A

7127.19 B 617.50 49586.74 6.18 49592.92 93.55 49686.47

Amount

46048.39 A

7843.68 B 679.25 54571.32 6.79 54578.11 102.91 54681.02

Amount

19875.10 A

3385.44 B 288.99 23549.53 2.89 23552.42 43.78

DSR-12

Page 1134 of 2298

23596.20

Amount

5343.75

1875.00

117.94

131.39 136.50 247.00 40.10 7891.68 78.92 7970.60 1195.59 9166.19

Amount

5343.75

1875.00

DSR-12

Page 1135 of 2298

117.94

131.39 204.75 494.00 60.24 8227.07 82.27 8309.34 1246.40 9555.74

Amount

5343.75

1875.00

117.94

131.39 409.50 988.00 120.29 8985.87 89.86 9075.73

DSR-12

Page 1136 of 2298

1361.36 10437.09

Amount

392.00

128.00

15.24

10.36

16.38 29.64 4.07 595.69 5.96 601.65 90.25 691.90

Amount

DSR-12

Page 1137 of 2298

392.25

128.25

15.24

10.36

32.76 61.75 8.14 648.75 6.49 655.24 98.29 753.53

Amount

392.25

128.00

15.24

DSR-12

Page 1138 of 2298

10.36

51.87 93.86 12.01 703.59 7.04 710.63 106.59 817.22

Amount

2672.00

468.75

58.83

58.16

68.25 123.50 46.88 3496.37 34.96 3531.33 529.70 4061.03

DSR-12

Page 1139 of 2298

Amount

2672.00

468.75

58.83

58.16

136.50 247.00 50.75 3691.99 36.92 3728.91 559.34 4288.25

Amount

2672.00

468.75

58.83

58.16

DSR-12

Page 1140 of 2298

204.75 370.50 70.89 3903.88 39.04 3942.92 591.44 4534.36

Amount

74812.50 26250.00

1651.31

267.79 102981.60 1029.82 104011.42 15601.71 119613.13

ng 1.5 m Amount

1781.25

1875.00

DSR-12

Page 1141 of 2298

117.66

74.08 68.25 123.50 29.44 4069.18 40.69 4109.87 616.48 4726.35

.5 m but not exceeding 3 m

Amount

1781.25

1875.00

117.66

DSR-12

Page 1142 of 2298

74.08 136.50 247.00 49.39 4280.88 42.81 4323.69 648.55 4972.24

m but not exceeding 4.5 m

Amount

1781.25

1875.00

117.66

74.08 273.00 432.25 69.54 4622.78 46.23 4669.01

DSR-12

Page 1143 of 2298

700.35 5369.36

utting and shoring complete. - Depth not

Amount

134.50

75.00

14.80

5.31 8.19 14.82 2.71 255.33 2.55 257.88 38.68 296.56

g and shoring complete. - Depth exceeding

DSR-12

Page 1144 of 2298

Amount

134.50

75.00

14.80

5.31 16.38 29.64 4.07 279.70 2.80 282.50 42.38 324.88

g and shoring complete. - Depth exceeding

Amount

134.50

DSR-12

Page 1145 of 2298

75.00

14.80

5.31 27.30 49.40 5.42 311.73 3.12 314.85 47.23 362.08

ing 1.5 m Amount

890.75

138.75

32.79

DSR-12

Page 1146 of 2298

32.76 61.75 29.44 1186.24 11.86 1198.10 179.72 1377.82

1.5 m but not exceeding 3 m

Amount

890.75

138.75

32.79 68.25 123.50 49.39 1303.43 13.03 1316.46 197.47 1513.93

m but not exceeding 4.5 m

Amount

DSR-12

Page 1147 of 2298

890.75

138.75

32.79 136.50 217.36 70.89 1487.04 14.87 1501.91 225.29 1727.20

sition. Amount

24937.50

26250.00

1651.31

DSR-12

Page 1148 of 2298

148.66 52987.47 529.87 53517.34 8027.60 61544.94

Amount 52.00 617.50 52.00 721.50 7.22 728.72 109.31 838.03

Amount 26.00 271.70 297.70 2.98 300.68 45.10 345.78

DSR-12

Page 1149 of 2298

Amount 52.00 481.65 533.65 5.34 538.99 80.85 619.84

Amount 5000.00 876.00 219.83 264.29 91.00 6451.12 64.51 6515.63 977.34 7492.97

eding 15 cm deep and disposal of rubbish,

Amount 486.59 318.63 805.22 8.05 813.27 121.99 935.26

inds of soil Amount 679.25

DSR-12

Page 1150 of 2298

130.00 809.25 8.09 817.34 122.60 939.94

n layers -All kinds of soil.

Amount

392.34 A 20.14 412.48 0.20 412.68 3.05 415.73

n layers Ordinary Rock

Amount

636.00 A 20.14 656.14 0.20 656.34 3.05 659.39

n layers - Hard rock (Requiring blasting)

Amount

DSR-12

Page 1151 of 2298

1136.46 A 20.14 1156.60 0.20 1156.80 3.05 1159.85

n layers - Hard rock blasting prohibited

Amount

1475.91 A 20.14 1496.05 0.20 1496.25 3.05 1499.30

val of rubbish.. Amount 266.76 148.20 414.96 4.15 419.11 62.87 481.98

of the area cleared.

Amount 148.20 61.75 2.71 212.66

DSR-12

Page 1152 of 2298

2.13 214.79 32.22 247.01

tting of trunks and branches removing the 30 cm girth up to and including .

Amount

81.51 41.99 4.07 127.57 1.28 128.85 19.33 148.18

tting of trunks and branches removing the 60 cm girth upto and including ..

Amount

370.50 185.25 8.14 563.89 5.64 569.53 85.43 654.96

DSR-12

Page 1153 of 2298

tting of trunks and branches removing the 120 cm girth upto and including 2

Amount

1729.00 864.50 12.01 2605.51 26.06 2631.57 394.74 3026.31

Amount

3458.00 1729.00 40.10 5227.10 52.27 5279.37 791.91 6071.28

DSR-12

Page 1154 of 2298

yriphos/ Lindane emulsifiable concentrate

Amount 16000.00 8.76 16008.76 160.09 16168.85 2425.33 18594.18

treatment - Along external wall - With

Amount

81.51

20.14 101.65 1.02 102.67 15.40 118.07

eatment - Along the external wall below

Amount

98.80 53.46 152.26 1.52 153.78 23.07 176.85

DSR-12

Page 1155 of 2298

tment - Treatment of soil under existing

Amount

494.00 136.50 53.46 683.96 6.84 690.80 103.62 794.42

ent - Treatment of existing masonry - With

Amount

74.10

13.65 26.73 114.48 1.14 115.62 17.34 132.96

DSR-12

Page 1156 of 2298

ment - Treatment at points of contact of

Amount

969.00 54.60 49.40 26.73 1099.73 11.00 1110.73 166.61 1277.34

Amount -20.80 -197.60 -218.40 -2.18 -220.58 -33.09 -253.67

nloading & stacking up to any lead

Amount

7.75 87.60 95.35 0.95 96.30 14.45 110.75

DSR-12

Page 1157 of 2298

rs (each layer should not exceed 15 cm),

Amount

52.00 617.50 52.00 721.50 7.22 728.72 109.31 838.03

Amount 672.00 220.50 74.46 476.00 37.23 3050.00 47.50 28.70 402.61 182.00 56.00 21.00 21.31 5289.31 52.89 5342.20 801.33 6143.53

aggregate.. .. Amount 598.50 294.00

DSR-12

Page 1158 of 2298

74.46 476.00 37.23 2000.00 31.15 28.70 402.61 182.00 56.00 21.00 21.31 4222.96 42.23 4265.19 639.78 4904.97

ggregate.. .. Amount 703.50 231.00 77.96 498.40 38.98 1600.00 24.92 28.70 402.61 182.00 56.00 21.00 21.31 3886.38 38.86 3925.24 588.79 4514.03

ggregate.. .. Amount 494.00 231.00 115.50

DSR-12

Page 1159 of 2298

49.51 28.91 498.40 38.98 1600.00 24.92 28.70 402.61 182.00 56.00 21.00 20.14 3791.67 37.92 3829.59 574.44 4404.03

ggregate.. .. Amount 735.00 252.00 82.34 526.40 41.17 1100.00 17.13 28.70 402.61 182.00 56.00 21.00 20.14 3464.49 34.64 3499.13 524.87 4024.00

ggregate.. .. Amount 617.50 252.00

DSR-12

Page 1160 of 2298

61.89 21.02 526.40 41.17 1100.00 17.13 28.70 402.61 182.00 56.00 21.00 20.14 3347.56 33.48 3381.04 507.16 3888.20

regate.. .. Amount 617.50 252.00 61.89 21.02 300.80 41.17 1100.00 17.13 28.70 402.61 182.00 56.00 21.00 20.14 3121.96 31.22 3153.18 472.98 3626.16

ggregate.. .. Amount

DSR-12

Page 1161 of 2298

617.50 252.00 61.89 21.02 526.40 41.17 850.00 13.24 28.70 402.61 182.00 56.00 21.00 20.14 3093.67 30.94 3124.61 468.69 3593.30

Amount 617.50 252.00 61.89 21.02 300.80 41.17 850.00 13.24 28.70 402.61 182.00 56.00 21.00 20.14 2868.07 28.68 2896.75 434.51 3331.26

aggregate.. ..

DSR-12

Page 1162 of 2298

Amount 617.50 252.00 61.89 21.02 526.40 41.17 650.00 10.12 28.70 402.61 182.00 56.00 21.00 20.14 2890.55 28.91 2919.46 437.92 3357.38

gregate.. .. Amount 617.50 252.00 61.89 21.02 300.80 41.17 650.00 10.12 28.70 402.61 182.00 56.00 21.00 13.37 2658.18 26.58 2684.76 402.71 3087.47

DSR-12

Page 1163 of 2298

Amount 617.50 252.00 61.89 21.02 414.40 32.41 1.63 18.40 850.00 13.24 28.70 402.61 182.00 56.00 21.00 21.31 2994.11 29.94 3024.05 453.61 3477.66

Amount 617.50 252.00 61.89 21.02 380.80 29.78 1.63 18.40 650.00 10.12 28.70 402.61 182.00 56.00 21.00 21.31 2754.76 27.55 2782.31 417.35 3199.66

DSR-12

Page 1164 of 2298

five level excluding centering, shuttering

Amount 672.00 220.50 74.46 476.00 37.23 3050.00 47.50 222.30 192.66 182.00 18.06 16.38 56.00 21.00 170.46 21.31 464.36 5942.22 59.42 6001.64 900.25 6901.89

ering, shuttering finishing : 1:1½:3 (Coarse

Amount 598.50 294.00 74.46 476.00 37.23 2000.00 31.15 222.30 192.66 182.00 18.06 16.38

DSR-12

Page 1165 of 2298

56.00 21.00 170.46 21.31 464.36 4875.87 48.76 4924.63 738.69 5663.32

2:4 (Coarse sand - stone aggregate 20mm)

Amount 703.50 231.00 77.96 498.40 38.98 1600.00 24.92 222.30 192.66 182.00 18.06 16.38 56.00 21.00 170.46 21.31 464.36 4539.29 45.39 4584.68 687.70 5272.38

five level excluding centering, shuttering

Amount 494.00

DSR-12

Page 1166 of 2298

231.00 115.50 49.51 28.91 498.40 38.98 1600.00 24.92 222.30 192.66 182.00 18.06 16.38 56.00 21.00 170.46 20.14 464.36 4444.58 44.45 4489.03 673.35 5162.38

five level excluding centering, shuttering

Amount 735.00 252.00 82.34 526.40 41.17 1100.00 17.13 222.30 192.66 182.00 18.06 16.38 56.00 21.00 170.46 20.14 464.36 4117.40 41.17

DSR-12

Page 1167 of 2298

4158.57 623.79 4782.36

tone agg. with coarse sand.

Amount 617.50 252.00 61.89 21.02 526.40 41.17 1100.00 17.13 222.30 192.66 182.00 18.06 16.38 56.00 21.00 170.46 20.14 464.36 4000.47 40.00 4040.47 606.07 4646.54

tone agg. with fine sand.

Amount 617.50 252.00 61.89 21.02 300.80 41.17 1100.00

DSR-12

Page 1168 of 2298

17.13 222.30 192.66 182.00 18.06 16.38 56.00 21.00 170.46 20.14 464.36 3774.87 37.75 3812.62 571.89 4384.51

stone agg. with fine sand.

Amount 617.50 252.00 61.89 21.02 526.40 41.17 650.00 10.12 222.30 192.66 182.00 30.10 56.00 21.00 170.46 21.31 464.36 3540.29 35.40 3575.69 536.35 4112.04

DSR-12

Page 1169 of 2298

Amount

357.00 25.50 197.20 32.98 13.09 64.26 32.93 116.22 225.75 370.50 77.48 38.74 1551.65 15.52 1567.17 235.08 1802.25

Amount

535.50 197.20 49.47

DSR-12

Page 1170 of 2298

19.64 190.40 41.15 116.22 1053.50 1482.00 116.22 77.48 3878.78 38.79 3917.57 587.64 4505.21

Amount

176.80 28.90 129.69 70.55 41.15 77.48 301.00 494.00 58.11 38.74 1416.42 14.16 1430.58 214.59 1645.17

DSR-12

Page 1171 of 2298

Amount

27084.18 A

27084.18 0.00 27084.18 0.00 27084.18

Amount

24144.00 A

24144.00 0.00 24144.00 0.00 24144.00

ates, anchor blocks, plain window sills,

Amount

2207.24 A

125.97

DSR-12

Page 1172 of 2298

12.58 B

45.59 C

11.81 D 54.09 2457.28 1.80 2459.08 27.28 2486.36

ates, anchor blocks, plain window sills,

Amount

2031.31 A

DSR-12

Page 1173 of 2298

12.58 B

125.97

45.59 C

11.81 D 54.09 2281.35 1.80 2283.15 27.28 2310.43

ates, anchor blocks, plain window sills,

Amount

1810.80 A

DSR-12

Page 1174 of 2298

12.58 B

125.97

45.59 C

11.81 D 54.09 2060.84 1.80 2062.64 27.28 2089.92

Amount

0.00 A 2708.42 B

7.64 C

DSR-12

Page 1175 of 2298

45.59 D

11.81 E

45.50 2818.96 0.46 2819.42 6.89 2826.31

: 1 : 2 : 4 - 20 mm stone agg. with coarse

Amount

2708.42 A

7.64 B

DSR-12

Page 1176 of 2298

45.59 C

11.81 D

211.42

167.96 180.60 889.20 4222.64 14.49 4237.13 219.55 4456.68

: 1 : 3 : 6 - 20 mm stone agg. with coarse

Amount

2414.40 A 211.42

7.64 B

DSR-12

Page 1177 of 2298

45.59 C

11.81 D

167.96 180.60 889.20 3928.62 14.49 3943.11 219.55 4162.66

3. 1 : 2 : 4 - 20 mm stone agg. with coarse

Amount

103.82 A

40.10

13.83 15.05 74.10 9.73 256.63 1.53 258.16 23.15 281.31

DSR-12

Page 1178 of 2298

3. 1 : 2 : 4 - 20 mm stone agg. with coarse

Amount

92.55 A

40.10

13.83 15.05 74.10 9.73 245.36 1.53 246.89 23.15 270.04

50 mm ,300mm long in the Bollard and MS

Amount

32.93 A

40.05 B

220.43 C

3.92 D

DSR-12

Page 1179 of 2298

120.72 E

25.26 F

19.37 462.68 0.19 462.87 2.93 465.80

m size. Amount

1805.61 A

283.50 -283.50 120.40 109.20 2.91 2038.12 2.33 2040.45 35.23 2075.68

size. Amount

2257.02 A

120.40 109.20 20.14 2506.76 2.50

DSR-12

Page 1180 of 2298

2509.26 37.84 2547.10

Amount 25.00

5.42 30.42 0.30 30.72 4.61 35.33

rse .. .. Amount 629.00 36.90 14.00 1.49

29.64 17.29

54.60 49.39 832.31 8.32 840.63 126.09 966.72

Amount

DSR-12

Page 1181 of 2298

370.50 370.50 3.71 374.21 56.13 430.34

Amount

187.50 988.00 1175.50 11.76 1187.26 178.09 1365.35

Amount 6.02 5.46 61.75 37.05 110.28 1.10 111.38 16.71 128.09

over 75mm bed by dry brick ballast 40mm.

Amount 375.00 71.42

DSR-12

Page 1182 of 2298

38.40 5.26

39.52 27.17

367.50 126.00 41.17 257.60 20.15 550.00 8.57 247.00 15.05 85.80 19.95 10.07 77.49 266.76 266.76 2916.64 29.17 2945.81 441.87 3387.68

g /water retaining structures etc.,

Amount 45.63 45.63 0.46 46.09 6.91 53.00

ated plant including pumping of RMC and

Amount

DSR-12

Page 1183 of 2298

617.50 252.00 61.89 21.02 414.40 32.41 1.63 18.40 1200.00 18.69 43.80

350.00 300.00 130.00

48.79 494.00 234.00 21.00 19.37 4278.90 42.79 4321.69 648.25 4969.94

ated plant including pumping of RMC and

Amount 617.50 252.00 61.89 21.02 414.40 32.41 1.63 18.40 1100.00 17.13 40.15

350.00 300.00

DSR-12

Page 1184 of 2298

130.00

48.79 494.00 234.00 21.00 19.37 4173.69 41.74 4215.43 632.31 4847.74

ated plant including pumping of RMC and

Amount 617.50 252.00 61.89 21.02 414.40 32.41 1.63 18.40 1200.00 18.69 43.80

350.00 300.00

48.79 494.00 234.00 21.00 19.37

464.36 4613.26 46.13 4659.39 698.91 5358.30

DSR-12

Page 1185 of 2298

ated plant including pumping of RMC and

Amount 617.50 252.00 61.89 21.02 414.40 32.41 1.63 18.40 1100.00 17.13 40.15

350.00 300.00

48.79 494.00 234.00 21.00 19.37

464.36 4508.05 45.08 4553.13 682.97 5236.10

ng of RMC and admixtures - All work upto

Amount 617.50 252.00 61.89 21.02 526.40

DSR-12

Page 1186 of 2298

41.17 1200.00 18.69 43.80

350.00 300.00 130.00

48.79 494.00 234.00 21.00 19.37 4379.63 43.80 4423.43 663.51 5086.94

ng of RMC and admixtures - All work upto

Amount 617.50 252.00 61.89 21.02 526.40 41.17 1100.00 17.13 40.15

350.00 300.00 130.00

48.79 494.00 234.00 21.00 19.37 4274.42 42.74 4317.16

DSR-12

Page 1187 of 2298

647.57 4964.73

g of RMC and admixtures - All work above

Amount 617.50 252.00 61.89 21.02 526.40 41.17 1200.00 18.69 43.80

350.00 300.00

48.79 494.00 234.00 21.00 19.37

464.36 4713.99 47.14 4761.13 714.17 5475.30

g of RMC and admixtures - All work above

Amount 617.50 252.00 61.89 21.02

DSR-12

Page 1188 of 2298

526.40 41.17 1100.00 17.13 40.15

350.00 300.00

48.79 494.00 234.00 21.00 19.37

464.36 4608.78 46.09 4654.87 698.23 5353.10

All work up to plinth level : 1:1:2 -coarse

Amount 672.00 220.50 74.46 476.00 37.23 3050.00 47.50 48.79 494.00 234.00 56.00 21.00 21.31 5452.79 54.53 5507.32 826.10 6333.42

DSR-12

Page 1189 of 2298

All work up to plinth level : 1:1.5:3 -coarse

Amount 598.50 294.00 74.46 476.00 37.23 2000.00 31.15 48.79 494.00 234.00 56.00 21.00 21.31 4386.44 43.86 4430.30 664.55 5094.85

All work up to plinth level : 1:2:4 -coarse

Amount 703.50 231.00 77.96 498.40 38.98 1600.00 24.92 48.79 494.00 234.00 56.00 21.00 21.31 4049.86 40.50 4090.36 613.55 4703.91

DSR-12

Page 1190 of 2298

st of centering, shuttering, finishing and

Amount 6168.96 2024.19 683.54 4369.68 341.77 27999.00 436.06 2788.63 1859.91 2147.60 276.92 251.16 512.00 192.00 196.41 625.84 4248.40 55122.07 551.22 55673.29 8350.99 64024.28

st of centering, shuttering, finishing and

Amount 5494.23 2698.92 683.54 4369.68 341.77 18360.00 285.94 2788.63 1859.91 2147.60 276.92 251.16 512.00 192.00 196.41 625.84

DSR-12

Page 1191 of 2298

4248.40 45332.95 453.33 45786.28 6867.94 52654.22

st of centering, shuttering, finishing and

Amount 6458.13 2120.58 715.71 4575.31 357.85 14688.00 228.75 2788.63 1859.91 2147.60 276.92 251.16 196.41 625.84 512.00 192.00 4248.40 42243.20 422.43 42665.63 6399.84 49065.47

uttering, finishing, reinforcement -1:2:4 -2

Amount 703.50 231.00 77.96 498.40 38.98 1600.00 24.92

DSR-12

Page 1192 of 2298

68.88 679.25 234.00 64.00 24.00 21.31 464.36 4730.56 47.31 4777.87 716.68 5494.55

reinforcement with 1:2:4 - coarse sand -20

Amount 4514.03 A

24.70 52.00 12.04 10.92 10.40 464.36 5088.45 5.74 5094.19 87.02 5181.21

Amount 18804.56 6174.63 2083.98 13322.18 1041.98 42768.00 666.07 1842.54 18156.97

DSR-12

Page 1193 of 2298

6255.60 1712.00 642.00 598.82 1505.00 1365.00 390.00 1111.50 12379.64 130820.47 1308.20 132128.67 19819.30 151947.97

Amount

5344.82 A

64.22 5409.04 0.64 5409.68 9.73 5419.41

Amount

4514.03 A

19.76 4533.79 0.20 4533.99 2.99 4536.98

DSR-12

Page 1194 of 2298

uttering, finishing and reinforcement with

Amount 395.01 194.04 49.14 314.16 24.57 1320.00 20.56 195.13 138.32 156.00 18.06 16.38 44.94 14.14 40.00 15.00 44.46

15.05 13.65 24.70 39.00 3092.31 30.92 3123.23 468.48 3591.71

columns, etc. for mass concrete.

Amount

357.00

25.50

DSR-12

Page 1195 of 2298

197.20

32.98

13.09

64.26

32.93 116.22 225.75 370.50 77.48 38.74 1551.65 15.52 1567.17 235.08 1802.25

ters, butteresses, plinth and string courses

Amount

535.50 197.20 49.47 19.64

190.40

41.15 116.22

DSR-12

Page 1196 of 2298

1053.50 1482.00 116.22 77.48 3878.78 38.79 3917.57 587.64 4505.21

gs, balconies and access platform

Amount

551.41 A 194.00 146.63 32.93 193.70 903.00 1482.00 116.22 74.05 3693.94 31.43 3725.37 476.09 4201.46

DSR-12

Page 1197 of 2298

Amount

551.41 A 194.00 146.63 32.93 193.70 903.00 1482.00 116.22 74.05 3693.94 31.43 3725.37 476.09 4201.46

rders, bressumers and cantilevers.

Amount

DSR-12

Page 1198 of 2298

385.49 A 146.63 44.86 32.93 116.22 376.25 617.50 58.11 36.34 1814.33 14.29 1828.62 216.47 2045.09

nts, Posts and Struts.

Amount

176.80 28.90

129.69

DSR-12

Page 1199 of 2298

70.55

41.15 77.48 301.00 494.00 58.11 38.74 1416.42 14.16 1430.58 214.59 1645.17

pt spiral-staircases.

Amount

722.00

121.75

29.60

4.37

DSR-12

Page 1200 of 2298

477.75 247.00 24.02 1626.49 16.26 1642.75 246.41 1889.16

Amount

367.07 A

918.15 B

541.62 C 1826.84 0.00 1826.84 0.00 1826.84

Amount

DSR-12

Page 1201 of 2298

6406.25

466.20 688.75

41.17 1.13 4368.00 3211.00 17.43 15199.93 152.00 15351.93 2302.79 17654.72

pan Amount

22197.50

DSR-12

Page 1202 of 2298

88.89

346.81

432.00

1.31

7644.00 5928.00 200.48

-28869.78 A 7969.21 368.39 8337.60 5581.11 13918.71

Amount

535.50 197.20 49.47 19.64 190.40 41.17

116.22 1053.50 1482.00

DSR-12

Page 1203 of 2298

116.22 77.48 3878.80 38.79 3917.59 587.64 4505.23

Amount 3995.63 665.95 4661.58 46.62 4708.20 706.23 5414.43

individually or forming box louvers band,

Amount

2981.25

840.75

DSR-12

Page 1204 of 2298

466.20

30.79

3003.00 2717.00 120.29 10159.28 101.59 10260.87 1539.13 11800.00

taken as 25.1)

s in cornices, window sills, string courses,

Amount

357.00

25.50 197.20 32.98 13.09 64.26

32.93

116.22 225.75 370.50

DSR-12

Page 1205 of 2298

77.48 38.74 1551.65 15.52 1567.17 235.08 1802.25

de Amount

178.00

484.50

2.65

221.13 133.38 7.75 1027.41 10.27 1037.68 155.65 1193.33

ve 20 cm wide

DSR-12

Page 1206 of 2298

Amount

500.00

547.00

4.19

273.00 185.25 9.69 1519.13 15.19 1534.32 230.15 1764.47

Amount

568.75

681.25

DSR-12

Page 1207 of 2298

110.25

8.89 171.99 155.61 9.69 1706.43 17.06 1723.49 258.52 1982.01

s etc Amount

334.50

DSR-12

Page 1208 of 2298

78.75

23.67

2.48 218.40 197.60 10.65 866.05 8.66 874.71 131.21 1005.92

s etc., including edges.

Amount

128.13

DSR-12

Page 1209 of 2298

37.50

19.30

1.34 81.90 61.75 7.75 337.67 3.38 341.05 51.16 392.21

y Amount

1625.09 A 1141.65

194.00 146.63 18.82 193.70 903.00

DSR-12

Page 1210 of 2298

1482.00 116.22 77.48 5898.59 42.74 5941.33 647.44 6588.77

Amount

1172.84 A

657.90 146.63

44.86 16.46 116.22 376.25 617.50 58.11 38.74 3245.51 20.73

DSR-12

Page 1211 of 2298

3266.24 314.01 3580.25

Amount

912.00 768.00 864.00 19.37 38.74 2602.11 26.02 2628.13 394.22 3022.35

Amount

1200.00 768.00 864.00 19.37 38.74 2890.11 28.90 2919.01 437.85 3356.86

Amount

1488.00

DSR-12

Page 1212 of 2298

768.00 864.00 19.37 38.74 3178.11 31.78 3209.89 481.48 3691.37

Amount

1920.00 768.00 864.00 19.37 38.74 3610.11 36.10 3646.21 546.93 4193.14

every additional height of 1 metre or part

Amount

522.17 -513.25

DSR-12

Page 1213 of 2298

307.02

24.55 96.85 903.00 1482.00 193.70 3016.04 30.16 3046.20 456.93 3503.13

etc with 1:2:4 Amount 5134.29 A

24.70 52.00 12.04 10.92 10.40 5244.35 1.10 5245.45 16.67 5262.12

shing excluding reinforcement with 1:2:4 -

Amount 2847.09 A 1001.28 B 12.35 26.00 6.02 5.46

DSR-12

Page 1214 of 2298

5.20 3903.40 0.55 3903.95 8.34 3912.29

Amount 135.42 A

8.40 4.07 60.08 B 2.40

5.24 4.75 11.12 0.47 0.74 1.56 0.36 0.33 0.31 235.25 0.40 235.65 6.02 241.67

Amount

4468.89 A 1151.47 B 274.17

DSR-12

Page 1215 of 2298

24.45 51.48 11.92 10.81 10.30 133.65 400.96 6538.10 9.18 6547.28 139.04 6686.32

hing excluding reinforcement with 1:2:4 -

Amount 7312.73 A

2645.20 B

1802.30 C

444.60

395.20 83.20 18.06 16.38 15.60

658.58 2014.48 15406.33 36.46 15442.79 552.38 15995.17

with 1:2:4 Amount

DSR-12

Page 1216 of 2298

2979.26 A 427.21 B

185.25

16.30 34.32 7.95 7.21 6.86 26.73 106.92 26.73 3824.74 4.18 3828.92 63.37 3892.29

Amount

315.00 9.30 9.24 90.30 81.90 266.76 772.50 7.73 780.23 117.03 897.26

Amount

DSR-12

Page 1217 of 2298

135.00 5.42 5.42 36.12 32.76 123.50 338.22 3.38 341.60 51.24 392.84

Amount 54.38 2.71 2.71 18.06 16.38 61.75 155.99 1.56 157.55 23.63 181.18

Amount

1913.95 A

10.37 22.10 5.12 4.64

DSR-12

Page 1218 of 2298

4.42 1072.36 B

32.15 3065.11 0.79 3065.90 11.94 3077.84

Amount

55296.87 A

302.58 637.00 147.49 133.77 127.40 3670.66 B 60315.77 13.48 60329.25 204.26 60533.51

s etc Amount

2835.00 20.14 20.14 75.25 61.75

DSR-12

Page 1219 of 2298

3012.28 30.12 3042.40 456.36 3498.76

nsile steel bars. Amount

4252.50 8.18 38.74

301.00 247.00 40.10 4887.52 48.88 4936.40 740.46 5676.86

Amount

4410.00 8.18

301.00 247.00 40.10 5006.28 50.06 5056.34 758.45 5814.79

DSR-12

Page 1220 of 2298

Amount

4725.00 8.18 38.74

301.00 247.00 40.10 5360.02 53.60 5413.62 812.04 6225.66

Amount

4725.00 8.18 38.74

301.00 247.00 40.10 5360.02 53.60 5413.62 812.04 6225.66

DSR-12

Page 1221 of 2298

Amount

5825.64 8.18 38.74

54.60 370.50 20.14 6317.80 63.18 6380.98 957.15 7338.13

on complete. - Upto plinth level Thermo-

Amount

4725.00

38.74

301.00 247.00 40.10 5351.84 53.52 5405.36 810.80 6216.16

DSR-12

Page 1222 of 2298

Amount 261.50 146.37 185.25 239.20 19.95 17.43 869.70 8.70 878.40 131.76 1010.16

Amount 145.92 106.50 1.66 60.20 54.60 61.75 52.88 96.00 13.14 7.94 9.30 609.89 6.10 615.99 92.40 708.39

Amount

2851.20 68.25 9.30

DSR-12

Page 1223 of 2298

2928.75 29.29 2958.04 443.71 3401.75

Amount 45880.00

108.62 992.00

24.83 758.52 687.96 1990.82 180.53 50623.28 506.23 51129.51 7669.43 58798.94

Amount

11211.00 26.54 242.40 6.11 18.00 0.28 1008.00 78.84

DSR-12

Page 1224 of 2298

758.52 687.96 1990.82 180.53 16209.00 162.09 16371.09 2455.66 18826.75

Amount

2625.00 50.00

819.00 40.10 36.12 32.76 61.75 40.10 3704.83 37.05 3741.88 561.28 4303.16

wide. Amount 85.54 0.38 60.05 54.60 49.40 249.97 2.50 252.47 37.87

DSR-12

Page 1225 of 2298

290.34

wide. Amount 114.66 0.51 80.19 73.71 66.69 335.76 3.36 339.12 50.87 389.99

m wide. Amount 228.00 1.80 1.55 18.29 16.55 2.71 268.90 2.69 271.59 40.74 312.33

m wide. Amount 323.00 1.80 1.94

DSR-12

Page 1226 of 2298

24.30 21.98 3.49 376.51 3.77 380.28 57.04 437.32

Amount 150.50 136.50 247.00 40.10 574.10 5.74 579.84 86.98 666.82

Amount

187.50 988.00 1175.50 11.76 1187.26 178.09 1365.35

Amount

DSR-12

Page 1227 of 2298

6.02 5.46 61.75 37.05 110.28 1.10 111.38 16.71 128.09

ng pumping of concrete to site, including

Amount 598.50 294.00 74.46 476.00 37.23 1650.00 25.70 60.23

350.00 130.00

48.79 494.00 234.00 21.00 19.37 4513.28 45.13 4558.41 683.76 5242.17

ng pumping of concrete to site, including

Amount 598.50 294.00 74.46

DSR-12

Page 1228 of 2298

476.00 37.23 1650.00 25.70 60.23

350.00 130.00

48.79 494.00 234.00 21.00 19.37

464.36 4977.64 49.78 5027.42 754.11 5781.53

Amount

50.00 0.78

3.65 54.43 0.54 54.97 8.25 63.22

Amount

100.00

DSR-12

Page 1229 of 2298

1.56

7.30 108.86 1.09 109.95 16.49 126.44

Amount

150.00 2.34

8.58 160.92 1.61 162.53 24.38 186.91

Amount 500.00 7.79 507.79 5.08 512.87 76.93 589.80

Amount

DSR-12

Page 1230 of 2298

7915.34 A

7653.12 B

598.68 C

19.37 119.13

301.00 1482.00

1054.43 D 19143.07 19.22 19162.29 291.11 19453.40

plinth level Amount 598.50 294.00 74.46 476.00 37.23 1650.00 25.70

DSR-12

Page 1231 of 2298

60.23

350.00 300.00 130.00

48.79 494.00 234.00 21.00 19.37 4813.28 48.13 4861.41 729.21 5590.62

above plinth level upto floor five level

Amount 598.50 294.00 74.46 476.00 37.23 1650.00 25.70 60.23

350.00 300.00 130.00

48.79 494.00 234.00 21.00 19.37

464.36 5277.64 52.78 5330.42 799.56 6129.98

DSR-12

Page 1232 of 2298

reof. _x000D_ Amount 130.00 130.00 1.30 131.30 19.70 151.00

d cement manufactured in fully automatic

Amount 617.50 252.00 61.89 21.02 414.40 32.41 1.63 18.40 1650.00 25.70 60.23

350.00 300.00 130.00

48.79 494.00 234.00 21.00 19.37 4752.34 47.52 4799.86 719.98 5519.84

DSR-12

Page 1233 of 2298

d cement manufactured in fully automatic vel

Amount 617.50 252.00 61.89 21.02 414.40 32.41 1.63 18.40 1650.00 25.70 60.23

350.00 300.00 130.00

48.79 494.00 234.00 21.00 19.37

464.36 5216.70 52.17 5268.87 790.33 6059.20

ry surface. - Non pigmented wet curing

Amount 200.00

125.58 56.81 26.00 12.01

DSR-12

Page 1234 of 2298

185.25 119.20 724.85 7.25 732.10 109.82 841.92

face. - Pigmented wet curing compound

Amount

320.00

125.58 56.81 26.00 12.01 185.25 119.20 844.85 8.45 853.30 128.00 981.30

nforcement - Coupler for 16 mm diameter

Amount 67.50 5.62 26.48 99.60 1.00 100.60 15.09 115.69

DSR-12

Page 1235 of 2298

nforcement - Coupler for 20 mm diameter

Amount 87.75 8.79 37.50 134.04 1.34 135.38 20.31 155.69

nforcement - Coupler for 25 mm diameter

Amount 129.50 12.95 44.12 186.57 1.87 188.44 28.27 216.71

nforcement - Coupler for 28mm diameter

Amount 191.25 19.13 48.53 258.91 2.59 261.50 39.23 300.73

DSR-12

Page 1236 of 2298

nforcement - Coupler for 32 mm diameter

Amount 230.50 23.07 48.53 302.10 3.02 305.12 45.77 350.89

mm wide. Amount 440.00 1.74 1.94 18.29 16.55 3.49 482.01 4.82 486.83 73.02 559.85

mm wide. Amount 660.00 1.74 1.94 18.29 16.55 3.49 702.01 7.02 709.03 106.35 815.38

DSR-12

Page 1237 of 2298

nt : 4 coarse sand)

Amount 1432.60 871.35 115.40 4.07 108.36 98.28 338.39 52.00 3020.45 30.20 3050.65 457.60 3508.25

Amount 1432.60 706.32 115.40 4.07 108.36 98.28 338.39 52.00 2855.42 28.55 2883.97 432.60 3316.57

Amount

DSR-12

Page 1238 of 2298

1534.05 113.76 766.79 4.07 99.33 90.09 247.00 46.80 2901.89 29.02 2930.91 439.64 3370.55

Amount 1534.05 113.76 621.56 4.07 99.33 90.09 247.00 46.80 2756.66 27.57 2784.23 417.63 3201.86

nation 12.5 in superstructure above plinth

Amount 2050.10 115.40 706.32 4.07 141.47

DSR-12

Page 1239 of 2298

128.31 444.60 52.00 33.32

279.11 3954.70 39.55 3994.25 599.14 4593.39

nation 12.5 in superstructure above plinth

Amount 1850.60 113.76 621.56 4.07 132.44 120.12 353.21 46.80 24.41

279.11 3546.08 35.46 3581.54 537.23 4118.77

pto floor V level in all shapes and sizes in :

Amount 1432.60 871.35 115.40 4.07

DSR-12

Page 1240 of 2298

141.47 128.31 444.60 52.00 33.32

279.11 3502.23 35.02 3537.25 530.59 4067.84

pto floor V level in all shapes and sizes in :

Amount 1432.60 706.32 115.40 4.07 141.47 128.31 444.60 52.00 33.32

279.11 3337.20 33.37 3370.57 505.59 3876.16

Amount 812.50 330.32 1142.82 11.43

DSR-12

Page 1241 of 2298

1154.25 173.14 1327.39

Amount 226.80 20.14 0.39

111.37 101.01 227.24 6.78 693.73 6.94 700.67 105.10 805.77

Amount

1183.71 A

60.00 36.12 32.76 14.82 1327.41 1.44 1328.85 21.77 1350.62

DSR-12

Page 1242 of 2298

Amount 1093.30 750.34 88.07 216.72 196.56 434.72 93.60 10.65

318.63 3202.59 32.03 3234.62 485.19 3719.81

Amount 1432.60 1036.38 115.40 4.07

1950.08 A

28.09 159.53 144.69 565.63 52.00

279.11 5767.58 38.18

DSR-12

Page 1243 of 2298

5805.76 578.35 6384.11

Amount

22197.50 88.89

346.81

432.00

1.31 7644.00 5928.00 200.48

DSR-12

Page 1244 of 2298

-28869.78 A 7969.21 368.39 8337.60 5581.11 13918.71

Amount 1638.50 1160.75 131.98 20.14 135.45 122.85 382.85 182.00 3774.52 37.75 3812.27 571.84 4384.11

Amount 1638.50 975.91 131.98 20.14 135.45 122.85 382.85 182.00 3589.68 35.90 3625.58 543.84 4169.42

DSR-12

Page 1245 of 2298

Amount 1638.50 1160.75 131.98 20.14 180.60 163.80 494.00 182.00 318.63 4290.40 42.90 4333.30 650.00 4983.30

Amount 1638.50 975.91 131.98 20.14 180.60 163.80 494.00 182.00 318.63 4105.56 41.06 4146.62 621.99 4768.61

Amount

DSR-12

Page 1246 of 2298

812.50 330.32 1142.82 11.43 1154.25 173.14 1327.39

asonry .... Amount

541.20 1.03 2.71 544.94 5.45 550.39 82.56 632.95

Amount 2408.70 1394.16 108.90 6.78 210.70 191.10 380.38 52.00 4752.72 47.53 4800.25 720.04 5520.29

DSR-12

Page 1247 of 2298

Amount 2408.70 1130.12 108.90 6.78 210.70 191.10 380.38 52.00 4488.68 44.89 4533.57 680.04 5213.61

CM 1:6 Amount

2874.90

108.90 1130.12 6.78 210.70 191.10 380.38 52.00 4954.88 49.55 5004.43 750.66 5755.09

vel in CM 1:6 Amount 2408.70 108.90 1130.12

DSR-12

Page 1248 of 2298

6.78 270.90 245.70 444.60 52.00 279.11 50.36 4997.17 49.97 5047.14 757.07 5804.21

Amount 2408.70 108.90 1219.89 8.14 1950.08 A

28.09 237.79 215.67 792.87 52.00

279.11 7301.24 53.51 7354.75 810.70 8165.45

Amount 2452.10 110.87 1219.89

DSR-12

Page 1249 of 2298

8.14

1950.08 A 28.09 451.50 409.50 1316.51 52.00

279.11 8277.79 63.28 8341.07 958.65 9299.72

Amount 1168.70 52.84 621.83 12.01 282.94 256.62 464.36 85.80

318.63 3263.73 32.64 3296.37 494.46 3790.83

Amount

DSR-12

Page 1250 of 2298

280.68 A

30.80 311.48 0.31 311.79 4.67 316.46

Amount

187.50 988.00 1175.50 11.76 1187.26 178.09 1365.35

Amount 6.02 5.46 61.75 37.05 110.28 1.10 111.38 16.71 128.09

nation 7.5 in exposed brick work including el

DSR-12

Page 1251 of 2298

Amount 1432.60 115.40 706.32 24.41

123.50 105.35 95.55 264.29 52.00 2919.42 29.19 2948.61 442.29 3390.90

nation 7.5 in exposed brick work including el

Amount 1432.60 115.40 706.32 24.41

123.50 138.46 125.58 395.20 52.00

279.11 33.32 3425.90 34.26 3460.16 519.02 3979.18

DSR-12

Page 1252 of 2298

in exposed brick work including making

Amount 1534.05 113.76 621.56 24.41

99.33 90.09 247.00 46.80 2777.00 27.77 2804.77 420.72 3225.49

in exposed brick work including making

Amount 1534.05 113.76 621.56 24.41

132.44 120.12 353.21 46.80

279.11 33.32 3258.78 32.59 3291.37 493.71 3785.08

DSR-12

Page 1253 of 2298

tion 12.5 in exposed brick work including l

Amount 1753.20 113.76 621.56 24.41

99.33 90.09 247.00 46.80 2996.15 29.96 3026.11 453.92 3480.03

tion 12.5 in exposed brick work including el.

Amount 1753.20 113.76 621.56 24.41

132.44 120.12 353.21 46.80

279.11 33.32 3477.93 34.78 3512.71 526.91 4039.62

DSR-12

Page 1254 of 2298

ss designation 12.5 in exposed brick work el

Amount 1753.70 115.40 706.32 24.41

108.36 98.28 338.39 52.00 3196.86 31.97 3228.83 484.32 3713.15

s designation 12.5 in exposed brick work oor V level.

Amount 1753.70 115.40 706.32 24.41

132.44 120.12 444.60 52.00

279.11 33.32 3661.42 36.61 3698.03 554.70 4252.73

DSR-12

Page 1255 of 2298

ricks of class designation 12.5 in exposed o plinth level

Amount 2050.10 115.40 706.32 24.41

108.36 98.28 338.39 52.00 3493.26 34.93 3528.19 529.23 4057.42

ricks of class 12.5 in exposed brick work oor V level.

Amount 2050.10 115.40 706.32 24.41

141.47 128.31 444.60 52.00

279.11 33.32 3975.04 39.75 4014.79 602.22 4617.01

DSR-12

Page 1256 of 2298

ss designation 12.5 in exposed brick work el

Amount 1850.60 113.76 621.56 24.41

99.33 90.09 247.00 46.80 3093.55 30.94 3124.49 468.67 3593.16

lass 12.5 in exposed brick work including el.

Amount 1850.60 113.76 621.56 24.41

132.44 120.12 353.21 46.80

279.11 33.32 3575.33 35.75 3611.08 541.66 4152.74

DSR-12

Page 1257 of 2298

Amount 1482.00 871.35 115.40 4.10 141.47 128.31 444.60 52.00 13.37

279.11 3531.71 35.32 3567.03 535.05 4102.08

l up to floor 5 level in : CM 1:6 (1 cement :

Amount 1482.00 706.32 115.40 4.07 141.47 128.31 444.60 52.00 13.37

279.11 3366.65 33.67 3400.32 510.05 3910.37

DSR-12

Page 1258 of 2298

Amount 1607.10 766.79 113.76 4.07 141.47 128.31 444.60 52.00 33.32

279.11 3570.53 35.71 3606.24 540.94 4147.18

oor V level in : CM 1:6 -Coarse sand

Amount 1607.10 621.56 113.76 4.07 141.47 128.31 444.60 52.00 33.32

279.11 3425.30 34.25 3459.55 518.93 3978.48

DSR-12

Page 1259 of 2298

PL to floor 5 level in CM 1:4

Amount 1753.20 766.79 113.76 4.07 141.47 128.31 444.60 52.00 33.32

279.11 3716.63 37.17 3753.80 563.07 4316.87

PL to floor 5 level in CM 1:6

Amount 1753.20 621.56 113.76 4.07 141.47 128.31 444.60 52.00 33.32

279.11 3571.40 35.71 3607.11 541.07 4148.18

DSR-12

Page 1260 of 2298

Amount 1899.30 766.79 113.76 4.07 99.33 90.09 247.00 46.80 3267.14 32.67 3299.81 494.97 3794.78

:3 Amount 1899.30 907.98 113.76 4.07 1950.08 A

126.42 114.66 459.42 52.00 5627.69 36.78 5664.47 557.16 6221.63

1:4 Amount 2025.00

DSR-12

Page 1261 of 2298

522.81 87.60 4.07 108.36 98.28 338.39 52.00 749.36 A 3985.87 32.37 4018.24 490.33 4508.57

evel Amount 4550.00 1325.00 20.14 150.50 247.00 6292.64 62.93 6355.57 953.34 7308.91

Amount

427.31 427.31 4.27 431.58 64.74 496.32

DSR-12

Page 1262 of 2298

vel upto floor 5 level in CM 1:4

Amount 2124.20 871.35 115.40 4.07 141.47 128.31 444.60 52.00

279.11 33.32 4193.83 41.94 4235.77 635.37 4871.14

vel upto floor 5 level in CM 1:6

Amount 2124.20 706.32 115.40 4.07 141.47 128.31 444.60 52.00

279.11 33.32 4028.80 40.29 4069.09 610.36 4679.45

DSR-12

Page 1263 of 2298

Amount 4.07

133.40 10.75 10.70 28.70 24.70 7.80 4.07 224.19 2.24 226.43 33.96 260.39

signation 10, conforming to IS : 12894, in

Amount 1864.50 131.98 1160.75 20.14 180.60 163.80 494.00 182.00

318.63 4516.40 45.16 4561.56 684.23 5245.79

DSR-12

Page 1264 of 2298

signation 10, conforming to IS : 12894, in

Amount 1864.50 131.98 975.91 20.14 180.60 163.80 494.00 182.00

318.63 4331.56 43.32 4374.88 656.23 5031.11

ass designation 10, in SS above plinth and

Amount 2429.50 131.98 1160.75 20.14 180.60 163.80 494.00 182.00

318.63 5081.40 50.81 5132.21 769.83 5902.04

DSR-12

Page 1265 of 2298

ass designation 10, , in SS above plinth and

Amount 2429.50 131.98 975.91 20.14 180.60 163.80 494.00 182.00

318.63 4896.56 48.97 4945.53 741.83 5687.36

Amount 675.00 77.00

119.55 932.35

292.11 264.29 175.37 23.40 68.18 6.59 2633.84 26.34 2660.18 399.03 3059.21

DSR-12

Page 1266 of 2298

veling up with CC 1:6:12 at window sills,

Amount 675.00 77.00 119.55

932.35 365.82 358.15 175.37 23.40 84.26

279.11 22.66 3112.67 31.13 3143.80 471.57 3615.37

Amount 158.34 66.69 225.03 2.25 227.28 34.09 261.37

Amount 195.75 29.89

DSR-12

Page 1267 of 2298

387.66 86.45 699.75 7.00 706.75 106.01 812.76

Amount 67.50 10.31 73.71 130.91 282.43 2.82 285.25 42.79 328.04

oarse sand) Amount 847.59 816.75 77.00

141.19 578.76 306.28 175.37 23.40 20.14 2986.48 29.86 3016.34 452.45 3468.79

rse sand)

DSR-12

Page 1268 of 2298

Amount 847.59 742.50 77.00

129.86 480.48 306.28 175.37 23.40 20.14 2802.62 28.03 2830.65 424.60 3255.25

ve plinth level and upto floor five level.-

Amount 847.59 816.75 77.00 141.19

649.74 392.73 175.37 23.40

279.11 56.17 3459.05 34.59 3493.64 524.05 4017.69

DSR-12

Page 1269 of 2298

ve plinth level and upto floor five level.-

Amount 847.59 742.50 77.00 129.86

551.46 392.73 175.37 23.40

279.11 56.17 3275.19 32.75 3307.94 496.19 3804.13

Amount 182.91 66.69 249.60 2.50 252.10 37.82 289.92

Amount 216.00 32.98

455.91 86.45 791.34

DSR-12

Page 1270 of 2298

7.91 799.25 119.89 919.14

Amount 74.25 11.34 90.09 130.91 306.59 3.07 309.66 46.45 356.11

one Amount

79.98 2.41

3.71

24.02 1.81 10.87 5.43 11.44

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01

DSR-12

Page 1271 of 2298

191.87 1.92 193.79 29.07 222.86

stone Amount

86.65 2.41

3.71

24.02 1.81 10.87 5.43 11.44

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 198.54 1.99 200.53 30.08 230.61

one Amount

DSR-12

Page 1272 of 2298

79.98 2.41

3.71

48.05 3.61 21.74 10.87 22.88

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 245.45 2.45 247.90 37.19 285.09

stone Amount

86.65 2.41

3.71

48.05 3.61 21.74 10.87 22.88

DSR-12

Page 1273 of 2298

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 252.12 2.52 254.64 38.20 292.84

M 1:2 (1 white cement : 2 stone dust) - One

Amount 79.98

2.41

24.02 1.81 10.87 5.43 11.44 12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 20.14 12.01

3.71 224.02 2.24 226.26 33.94 260.20

DSR-12

Page 1274 of 2298

M 1:2 (1 white cement : 2 stone dust) - One

Amount 86.65

2.41

24.02 1.81 10.87 5.43 11.44 12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 20.14 12.01

3.71 230.69 2.31 233.00 34.95 267.95

ng with CM 1:2 (1 white cement : 2 stone

Amount 79.98

DSR-12

Page 1275 of 2298

2.41

48.05 3.61 21.74 10.87 22.88 12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 20.14 12.01

3.71 277.60 2.78 280.38 42.06 322.44

ng with CM 1:2 (1 white cement : 2 stone

Amount 86.65

2.41

48.05 3.61 21.74 10.87 22.88 12.01 1.81 5.43

DSR-12

Page 1276 of 2298

5.43 5.72 5.72 4.07 12.01 20.14 12.01

3.71 284.27 2.84 287.11 43.07 330.18

ng with CM 1:2 (1 white cement : 2 stone

Amount 79.98

2.41

48.05 1.81 52.98 10.87 5.43 11.44 12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 49.39 12.01

3.71 330.28 3.30 333.58 50.04

DSR-12

Page 1277 of 2298

383.62

ng with CM 1:2 (1 white cement : 2 stone

Amount 86.65

2.41

48.05 1.81 52.98 10.87 5.43 11.44 12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 49.39 12.01

3.71 336.95 3.37 340.32 51.05 391.37

ng with CM 1:2 (1 white cement : 2 stone

Amount 79.98

DSR-12

Page 1278 of 2298

2.41

96.10 3.61 105.95 21.74 10.87 22.88 12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 49.39 12.01

3.71 460.85 4.61 465.46 69.82 535.28

ng with CM 1:2 (1 white cement : 2 stone

Amount 86.65

2.41

96.10 3.61 105.95 21.74 10.87

DSR-12

Page 1279 of 2298

22.88 12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 49.39 12.01

3.71 467.52 4.68 472.20 70.83 543.03

ingle faced punched.

Amount

79.98 2.41

16.11 1.81 10.87 5.43 11.44

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01

3.71 183.96 1.84

DSR-12

Page 1280 of 2298

185.80 27.87 213.67

e: One Face punched

Amount 86.65

2.41

16.11 1.81 10.87 5.43 11.44

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01

3.71 190.63 1.91 192.54 28.88 221.42

ed. - Red sand stone

Amount

79.98

DSR-12

Page 1281 of 2298

2.41

3.71

32.21 3.61 21.74 10.87 22.88

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 229.61 2.30 231.91 34.79 266.70

Double faced punched.

Amount

86.65 2.41

3.71

32.21 3.61 21.74 10.87 22.88

DSR-12

Page 1282 of 2298

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01 236.28 2.36 238.64 35.80 274.44

ors or part thereof.

Amount

4.94 4.94 0.05 4.99 0.75 5.74

Amount 13.37 13.37 0.13 13.50 2.03 15.53

exceeding 6 metre.

DSR-12

Page 1283 of 2298

Amount 9.30 9.30 0.09 9.39 1.41 10.80

Amount

22197.50 88.89

346.81

432.00

1.31

DSR-12

Page 1284 of 2298

7644.00 5928.00 200.48

-28869.78 A 7969.21 368.39 8337.60 5581.11 13918.71

sand stone. Amount

79.98 2.41

12.01

79.44 1.81 10.87 5.43 11.44

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01

3.71 259.30 2.59 261.89 39.28 301.17

DSR-12

Page 1285 of 2298

te sand stone. Amount

86.65 2.41 12.01

79.44 1.81 10.87 5.43 11.44

12.01 1.81 5.43 5.43 5.72 5.72 4.07 12.01

3.71 265.97 2.66 268.63 40.29 308.92

quare or rectangular pillars.

Amount 17.43 17.43 0.17 17.60 2.64

DSR-12

Page 1286 of 2298

20.24

gonal pillars. Amount 49.39 49.39 0.49 49.88 7.48 57.36

Amount

136.50 185.25 321.75 3.22 324.97 48.75 373.72

Red sand stone-exposed face fine dressed

Amount

559.98 16.74 40.10

368.55 9.63 55.33 27.66 58.24

DSR-12

Page 1287 of 2298

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1735.29 17.35 1752.64 262.90 2015.54

Red sand stone-exposed face fine dressed

Amount

480.00 14.33 40.10

368.55 9.63 55.33 27.66 58.24

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1652.90 16.53 1669.43 250.41 1919.84

DSR-12

Page 1288 of 2298

Red sand stone-exposed face fine dressed

Amount

400.20 11.91 40.10

368.55 9.63 55.33 27.66 58.24

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1570.68 15.71 1586.39 237.96 1824.35

Red sand stone-exposed face fine dressed

Amount

319.98 9.58 40.10

368.55 9.63 55.33 27.66 58.24

DSR-12

Page 1289 of 2298

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1488.13 14.88 1503.01 225.45 1728.46

Red sand stone-exposed face fine dressed

Amount

239.94 7.16 40.10

368.55 9.63 55.33 27.66 58.24

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1405.67 14.06 1419.73 212.96 1632.69

DSR-12

Page 1290 of 2298

Red sand stone - exposed face machine cut

Amount

559.98 16.74 40.10

737.10 19.26 110.66 55.33 116.48

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 2254.71 22.55 2277.26 341.59 2618.85

Red sand stone - exposed face machine cut

Amount

480.00 14.33 40.10

737.10 19.26 110.66 55.33 116.48

DSR-12

Page 1291 of 2298

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 2172.32 21.72 2194.04 329.11 2523.15

Red sand stone - exposed face machine cut

Amount

400.20 11.91 40.10

737.10 19.26 110.66 55.33 116.48

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 2090.10 20.90 2111.00 316.65 2427.65

DSR-12

Page 1292 of 2298

Red sand stone - exposed face machine cut

Amount

319.98 9.58 40.10

737.10 19.26 110.66 55.33 116.48

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 2007.55 20.08 2027.63 304.14 2331.77

Red sand stone - exposed face machine cut

Amount

239.94 7.16 40.10

737.10 19.26 110.66 55.33 116.48

DSR-12

Page 1293 of 2298

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1925.09 19.25 1944.34 291.65 2235.99

White sand stone-exposed face fine dressed

Amount

606.65 16.74 40.10

368.55 9.63 55.33 27.66 58.24

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1781.96 17.82 1799.78 269.97 2069.75

DSR-12

Page 1294 of 2298

White sand stone-exposed face fine dressed

Amount

520.00 14.33 40.10

368.55 9.63 55.33 27.66 58.24

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1692.90 16.93 1709.83 256.47 1966.30

White sand stone-exposed face fine dressed

Amount

433.55 11.91 40.10

368.55 9.63 55.33 27.66 58.24

DSR-12

Page 1295 of 2298

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1604.03 16.04 1620.07 243.01 1863.08

White sand stone-exposed face fine dressed

Amount

346.45 9.58 40.10

368.55 9.63 55.33 27.66 58.24

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1514.60 15.15 1529.75 229.46 1759.21

DSR-12

Page 1296 of 2298

White sand stone-exposed face fine dressed

Amount

259.94 7.16 40.10

368.55 9.63 55.33 27.66 58.24

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1425.67 14.26 1439.93 215.99 1655.92

White sand stone-exposed face machine cut

Amount

606.65 16.74 40.10

737.10 19.26 110.66 55.33 116.48

DSR-12

Page 1297 of 2298

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 2301.38 23.01 2324.39 348.66 2673.05

White sand stone-exposed face machine cut

Amount

520.00 14.33 40.10

737.10 19.26 110.66 55.33 116.48

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 2212.32 22.12 2234.44 335.17 2569.61

DSR-12

Page 1298 of 2298

White sand stone-exposed face machine cut

Amount

433.55 11.91 40.10

737.10 19.26 110.66 55.33 116.48

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 2123.45 21.23 2144.68 321.70 2466.38

White sand stone-exposed face machine cut

Amount

346.45 9.58 40.10

737.10 19.26 110.66 55.33

DSR-12

Page 1299 of 2298

116.48

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 2034.02 20.34 2054.36 308.15 2362.51

White sand stone-exposed face machine cut

Amount

259.94 7.16 40.10

737.10 19.26 110.66 55.33 116.48

122.30 87.36 82.99 82.99 87.36 32.00 29.44 74.62 1945.09 19.45 1964.54 294.68 2259.22

DSR-12

Page 1300 of 2298

Amount 13.37 13.37 0.13 13.50 2.03 15.53

Amount

313.92 5.81 4.86 96.85 421.44 4.21 425.65 63.85 489.50

Amount 13.56 7.94

DSR-12

Page 1301 of 2298

4.86 26.36 0.26 26.62 3.99 30.61

Amount

10.00 5.81 4.86 2.91 23.58 0.24 23.82 3.57 27.39

along the slope in CM 1:4 Red sand stone:

Amount

426.25 19.70 136.50 82.00 100.34 42.11 9.30 40.10 273.00 370.50 24.02

DSR-12

Page 1302 of 2298

154.96

73.22 A 1752.00 16.79 1768.79 254.34 2023.13

long the slope in CM 1:4 White sand stone

Amount

467.50 19.70 136.50 82.00 100.34 42.11 9.30 40.10 273.00 370.50 24.02

154.96

73.22 A 1793.25 17.20 1810.45 260.58 2071.03

DSR-12

Page 1303 of 2298

ne. Amount

348.75 17.68 122.85 80.19 9.30 40.10 163.80 197.60 20.14 1000.41 10.00 1010.41 151.56 1161.97

tone. Amount

382.50 17.68 122.85 80.19 9.30 40.10 163.80 197.60 20.14 1034.16 10.34 1044.50 156.68 1201.18

DSR-12

Page 1304 of 2298

alls with CM 1 : 4 CS.

Amount

240.00 10.90 20.14 234.78 123.50 629.32 6.29 635.61 95.34 730.95

cramps 25 x 6 mm, 30 cm long.

Amount

369.60 10.90

489.38 11.14 66.94 33.47 70.46 280.00

67.27 10.11 30.43 30.43

DSR-12

Page 1305 of 2298

32.03 32.03 22.78 67.26 285.95 1910.18 19.10 1929.28 289.39 2218.67

d sand stone. Amount

1504.31 A 79.42 191.10 172.90 1947.73 4.43 1952.16 67.18 2019.34

hite sand stone. Amount

1556.62 A 79.42 191.10 172.90 2000.04

DSR-12

Page 1306 of 2298

4.43 2004.47 67.18 2071.65

Amount

170.50 7.86

3467.10 2087.15 120.29 5852.90 58.53 5911.43 886.71 6798.14

Amount

187.00 7.86

3467.10 2087.15 120.29 5869.40 58.69 5928.09 889.21 6817.30

DSR-12

Page 1307 of 2298

water and removing slush.

Amount

187.50 988.00 1175.50 11.76 1187.26 178.09 1365.35

Amount 6.02 5.46 61.75 37.05 110.28 1.10 111.38 16.71 128.09

ce with stone strips Amount

156.40

36.40

8.41 160.00

DSR-12

Page 1308 of 2298

126.02

193.47 A 60.24 75.25 68.25 123.50 7.80 40.10 1055.84 8.62 1064.46 130.65 1195.11

with CM 1:2 SD. Kota stone slabs exposed

Amount

2012.50 52.17 596.96 60.24 1774.50 1605.50 1062.10 2808.00 166.19 10138.16 101.38 10239.54 1535.93 11775.47

Amount

DSR-12

Page 1309 of 2298

6918.75 59.66 580.37 165.00 38.35 2317.70 1901.90 387.40 255.68 12624.81 126.25 12751.06 1912.66 14663.72

Amount

4920.00 59.66 580.37 165.00 38.35 2317.70 1901.90 387.40 255.68 10626.06 106.26 10732.32 1609.85 12342.17

Amount 320.77

DSR-12

Page 1310 of 2298

90.30 74.10 39.00 42.61 566.78 5.67 572.45 85.87 658.32

dges) of uniform colour and size 1m x 1m,

Amount

1740.00 80.00 16.74 45.71 228.57 305.08 602.00 988.00 247.00 305.08 75.25 123.50 305.08 76.32 5138.33 51.38 5189.71 778.46 5968.17

dges) of uniform colour and size 1m x 1m,

Amount

DSR-12

Page 1311 of 2298

1892.25 80.00 16.74 45.71 228.57 305.08 602.00 988.00 247.00 305.08 75.25 123.50 305.08 76.32 5290.58 52.91 5343.49 801.52 6145.01

ut eges sand stone)on walls at all heights

Amount

2470.56

2524.50

1494.14 A

78.26

DSR-12

Page 1312 of 2298

70.98 494.00

840.00 403.34 174.20 1215.24 120.29

614.07 B 120.29 10619.87 85.12 10704.99 1289.52 11994.51

Amount 840.00

27.30 273.00 271.70 30.99 30.99 1473.98 14.74 1488.72 223.31 1712.03

Amount

DSR-12

Page 1313 of 2298

366.00 2.34 33.16 11.41

100.84 87.10 82.75 82.75 87.10 42.90 40.64 19.95 956.94 9.57 966.51 144.98 1111.49

Amount

816.00 4.67 59.70 23.77

201.67 174.20 165.49 165.49 174.20 85.80 81.27 40.10 1992.36 19.92 2012.28 301.84 2314.12

DSR-12

Page 1314 of 2298

Sqm Amount

320.25 41.82 210.70 80.28 80.28 58.11 24.21 815.65 8.16 823.81 123.57 947.38

Sqm Amount

714.00 83.65 421.40 160.55 160.55 116.22 48.43 1704.80 17.05 1721.85 258.28 1980.13

Amount

813.75

DSR-12

Page 1315 of 2298

41.82 210.70 80.28 80.28 58.11 24.21 1309.15 13.09 1322.24 198.34 1520.58

Amount

3444.00 167.30 842.80 321.10 321.10 116.22 96.85 5309.37 53.09 5362.46 804.37 6166.83

ble work Amount 300.00 494.00 116.22 910.22 9.10 919.32 137.90

DSR-12

Page 1316 of 2298

1057.22

Amount 500.00 864.50 174.33 1538.83 15.39 1554.22 233.13 1787.35

y resin based Amount

90.30 74.10 58.11 17.43 239.94 2.40 242.34 36.35 278.69

Amount 120.40 98.80 22.80 242.00 2.42 244.42 36.66 281.08

DSR-12

Page 1317 of 2298

ss finish complete. Amount

300.00 617.50 390.00 96.85 1404.35 14.04 1418.39 212.76 1631.15

cessary hole in stones and embedding the

Amount

329.40 5.81 4.86 96.85 436.92 4.37 441.29 66.19 507.48

cessary hole in stones and embedding the

DSR-12

Page 1318 of 2298

Amount

313.92 5.81 4.86 96.85 421.44 4.21 425.65 63.85 489.50

nd the cost of bolt etc. complete :- Wedge

Amount

360.00 24.30 75.25 61.75 48.43 569.73 5.70 575.43 86.31 661.74

nd the cost of bolt etc. complete :- Wedge

Amount

DSR-12

Page 1319 of 2298

420.00 32.40 75.25 61.75 48.43 637.83 6.38 644.21 96.63 740.84

nd the cost of bolt etc. complete :- Wedge

Amount

780.00 40.50 75.25 61.75 48.43 1005.93 10.06 1015.99 152.40 1168.39

ck: Raj Nagar plain/ Udaipur green marble/

Amount

348.50 5.89 58.04 37.82 16.50 301.00 247.00

DSR-12

Page 1320 of 2298

25.18 1039.93 10.40 1050.33 157.55 1207.88

k: Granite of any colour and shade.

Amount

691.88 5.89 58.04 37.82 16.50 301.00 247.00 25.18 1383.31 13.83 1397.14 209.57 1606.71

nal partitions: White Agaria Marble stone.

Amount

733.50

32.15

64.31 32.15 862.11 8.62

DSR-12

Page 1321 of 2298

870.73 130.61 1001.34

rinal partitions: Granite Stone of approved

Amount

821.25 32.15 64.31 32.15 949.86 9.50 959.36 143.90 1103.26

k wood Amount 2432.00 3.80 206.64 17.29 2659.73 26.60 2686.33 402.95 3089.28

Amount 1900.00 3.80

DSR-12

Page 1322 of 2298

206.64 17.29 2127.73 21.28 2149.01 322.35 2471.36

d hollock wood. Amount

1178.00 3.80 25.84 13.37 206.64 17.29 1444.94 14.45 1459.39 218.91 1678.30

Amount

2527.00 3.80 60.20 54.60

DSR-12

Page 1323 of 2298

49.40 2695.00 26.95 2721.95 408.29 3130.24

Amount

8300.00 16.62 273.00 247.00 80.19 8916.81 89.17 9005.98 1350.90 10356.88

k wood. Amount

5146.00 16.62 112.88 27.12 273.00 247.00

DSR-12

Page 1324 of 2298

80.19 5902.81 59.03 5961.84 894.28 6856.12

Amount

243.20 0.38 20.66 1.73 265.97 2.66 268.63 40.29 308.92

Amount

190.00 0.38 20.66 1.73 212.77 2.13 214.90 32.24 247.14

DSR-12

Page 1325 of 2298

k wood. Amount

117.80 0.38 2.58 1.34 20.66 1.73 144.49 1.44 145.93 21.89 167.82

.. ..Second class teak wood ....35 mm thick

Amount

3672.00 5.11 48.00 9.00 24.00 2.00 525.21 187.72 53.46 4526.50 45.27 4571.77 685.77

DSR-12

Page 1326 of 2298

5257.54

.. ..Second class teak wood ....30 mm thick

Amount

3168.00 4.40 48.00 9.00 24.00 2.00 525.21 187.72 53.46 4021.79 40.22 4062.01 609.30 4671.31

ollock wood 35 mm thick

Amount

DSR-12

Page 1327 of 2298

1785.00 5.11 34.68 13.56 48.00 9.00 24.00 2.00 525.21 187.72 53.46 2687.74 26.88 2714.62 407.19 3121.81

ollock wood 30 mm thick

Amount

1540.00 4.40 29.92 13.56 48.00 9.00 24.00 2.00 525.21 187.72 53.46 2437.27 24.37

DSR-12

Page 1328 of 2298

2461.64 369.25 2830.89

ssed butt hinges excluding, panelling - Kiln

Amount

3315.00 5.11 34.68 48.00 9.00 24.00 2.00 525.21 187.72 53.46 4204.18 42.04 4246.22 636.93 4883.15

ssed butt hinges excluding, panelling - Kiln

Amount

DSR-12

Page 1329 of 2298

2860.00 4.40 29.92 36.00 24.00

525.21 187.72 53.46 3720.71 37.21 3757.92 563.69 4321.61

ade-1, medium density flat pressed 3 layer

Amount

4236.40 44.16 48.00 9.00 24.00 2.00 149.24 148.20 53.46 4714.46 47.14 4761.60 714.24 5475.84

-laminated decorative lamination on both

DSR-12

Page 1330 of 2298

Amount

4593.40 44.16 48.00 9.00 24.00 2.00 149.24 148.20 53.46 5071.46 50.71 5122.17 768.33 5890.50

minated (decorative lamination on one side

Amount

4403.00 44.16 48.00 9.00 24.00 2.00 149.24 148.20 53.46 4881.06 48.81 4929.87 739.48 5669.35

DSR-12

Page 1331 of 2298

nd class teak wood.

Amount

928.80 1.29 171.57 6.59 1108.25 11.08 1119.33 167.90 1287.23

n seasoned and chemically treated Hollock

Amount

451.50 1.29 8.77 13.37 171.57 6.59 653.09 6.53 659.62 98.94 758.56

ve veneer on both sides.

DSR-12

Page 1332 of 2298

Amount

768.00 2.71 171.57 6.59 948.87 9.49 958.36 143.75 1102.11

ive veneer on one side and commr veneer

Amount

620.00 2.71 171.57 6.59 800.87 8.01 808.88 121.33 930.21

e decorative veneering.

Amount

676.00 2.71 171.57

DSR-12

Page 1333 of 2298

6.59 856.87 8.57 865.44 129.82 995.26

board. Amount

260.00 2.71 171.57 6.59 440.87 4.41 445.28 66.79 512.07

12mm thick veneered particle board with

Amount

384.00 2.71 171.57 6.59 564.87 5.65 570.52 85.58 656.10

DSR-12

Page 1334 of 2298

d particle board - one side laminated.

Amount

552.00 2.71 171.57 6.59 732.87 7.33 740.20 111.03 851.23

d particle board - both sides laminated.

Amount

576.00 2.71 171.57 6.59 756.87 7.57 764.44 114.67 879.11

ors, windows etc - for panelled or panelled

Amount

DSR-12

Page 1335 of 2298

497.60 2.71 171.57 6.59 678.47 6.78 685.25 102.79 788.04

ors, windows etc - for panelled or panelled

Amount

248.00 2.71 163.59 40.95 37.05 37.95 530.25 5.30 535.55 80.33 615.88

ors, windows etc - for panelled or panelled

Amount

360.00

DSR-12

Page 1336 of 2298

2.71 163.59 40.95 37.05 37.95 642.25 6.42 648.67 97.30 745.97

ors, windows etc - for panelled or panelled e with 0.5 mm dia. Wire and 1.4 m

Amount

608.00 2.71 155.61 6.59 772.91 7.73 780.64 117.10 897.74

M.S butt hinges, screws etc - Second class

Amount

DSR-12

Page 1337 of 2298

4176.00 393.70 48.00 9.00 24.00 2.00 5.81 525.21 62.79 190.19 60.24 5496.94 54.97 5551.91 832.79 6384.70

Amount

3600.00 393.70 48.00 9.00 24.00 2.00 5.01 525.21 62.79 190.19 60.24

DSR-12

Page 1338 of 2298

4920.14 49.20 4969.34 745.40 5714.74

ollock wood : 35 mm thick.

Amount

2030.00 39.44 13.56 393.70 48.00 9.00 24.00 2.00 5.81 525.21 62.79 190.19 60.24 3403.94 34.04 3437.98 515.70 3953.68

ollock wood : 30 mm thick.

DSR-12

Page 1339 of 2298

Amount

1750.00 34.00 13.56 393.70 48.00 9.00 24.00 2.00 5.01 525.21 62.79 190.19 60.24 3117.70 31.18 3148.88 472.33 3621.21

essed butt hinges - Kiln seasoned selected

Amount

DSR-12

Page 1340 of 2298

3770.00 39.44 5.81 393.70 48.00 9.00 24.00 2.00

525.21 62.79 190.19 60.24 5130.38 51.30 5181.68 777.25 5958.93

hinges - Kiln seasoned selected planks of

Amount

3250.00 5.01 34.00 393.70 48.00 9.00 24.00 2.00

525.21

DSR-12

Page 1341 of 2298

62.79 190.19 60.24 4604.14 46.04 4650.18 697.53 5347.71

15:2001,using 4mm thick float glass panes ick shutters.

Amount

3760.40 44.16 48.00 9.00 24.00 2.00 149.24 148.20 53.46 4238.46 42.38 4280.84 642.13 4922.97

ters 5.5mm instead of 4mm

Amount

450.00 -310.00 140.00 1.40 141.40 21.21 162.61

DSR-12

Page 1342 of 2298

Amount 315.00 -310.00 5.00 0.05 5.05 0.76 5.81

Amount

255.00 -310.00 -55.00 -0.55 -55.55 -8.33 -63.88

Amount

138.00 25.00 93.60 7.60

-48.00 -9.00 -24.00 -2.00 181.20 1.81 183.01

DSR-12

Page 1343 of 2298

27.45 210.46

d and other inferior class of wood shutters

Amount

138.00 25.00 93.60 7.60 264.20 2.64 266.84 40.03 306.87

other inferior class of wood shutters

Amount

48.00 9.00 24.00 2.00 83.00 0.83 83.83 12.57 96.40

d class teak wood i/c anodised aluminium

Amount

DSR-12

Page 1344 of 2298

2880.00 4.00 306.90 234.00 91.20 722.40 49.14 190.19 60.24 4538.07 45.38 4583.45 687.52 5270.97

zed shutters - Second class teak wood with

Amount

2880.00

DSR-12

Page 1345 of 2298

4.00 306.90

140.00 216.60 722.40 49.14 190.19 60.24 4569.47 45.69 4615.16 692.27 5307.43

ed aluminium hinges Amount

3096.00 393.70 234.00 14.40 4.30 525.21 62.79 190.19 60.24 4580.83 45.81 4626.64 694.00 5320.64

DSR-12

Page 1346 of 2298

nd class teak wood - nickel plated bright

Amount

3096.00 4.00 393.70 140.00 34.20

525.21 62.79 190.19 60.24 4506.33 45.06 4551.39 682.71 5234.10 (Error in DAR Calculations)

ck Amount

2388.75 20.14 40.10 245.70 247.00 2941.69 29.42 2971.11 445.67 3416.78

DSR-12

Page 1347 of 2298

ck Amount

2866.50 29.44 40.10 245.70 247.00 3428.74 34.29 3463.03 519.45 3982.48

rative and other side balancing lamination

Amount

510.30 1.36 30.03 14.82 11.62 568.13 5.68 573.81 86.07 659.88

rative and other side balancing lamination

DSR-12

Page 1348 of 2298

Amount

554.40 2.71 30.03 14.82 11.62 613.58 6.14 619.72 92.96 712.68

n both faces 35mm thick i/c stainless steel

Amount

3520.00 44.16 138.00 93.60

157.85 135.85 4089.46 40.89 4130.35 619.55 4749.90

n both faces 30mm thick i/c stainless steel

Amount

3190.00 44.16 138.00

DSR-12

Page 1349 of 2298

93.60

157.85 135.85 3759.46 37.59 3797.05 569.56 4366.61

both faces 25mm thick i/c nickel plated MS

Amount

2860.00 44.16 154.00 37.50

157.85 135.85 3389.36 33.89 3423.25 513.49 3936.74

Amount 2420.00 44.16 138.00 93.60

157.85 135.85 2989.46

DSR-12

Page 1350 of 2298

29.89 3019.35 452.90 3472.25

ges: Amount 2090.00 44.16 138.00 93.60

157.85 135.85 2659.46 26.59 2686.05 402.91 3088.96

including ISI marked nickel plated bright

Amount 1870.00 44.16

154.00 37.50

157.85 135.85 2399.36 23.99 2423.35 363.50 2786.85

DSR-12

Page 1351 of 2298

Amount 320.00 320.00 3.20 323.20 48.48 371.68

n all edges of shutters Over item 9.24 and

Amount 280.00 280.00 2.80 282.80 42.42 325.22

Amount 110.00 110.00 1.10 111.10 16.67 127.77

Amount 170.00 170.00 1.70 171.70 25.76

DSR-12

Page 1352 of 2298

197.46

Amount 290.00 290.00 2.90 292.90 43.94 336.84

Amount 80.00 80.00 0.80 80.80 12.12 92.92

h directions 0.63 mm dia wire for doors,

Amount

3700.80

DSR-12

Page 1353 of 2298

324.30 48.00 9.00 24.00 2.00 5.15 391.30 245.70 259.35 31.61 50.36 5091.57 50.92 5142.49 771.37 5913.86

h directions 0.63 mm dia wire for doors, hollock wood.

Amount

1799.00 5.15 34.95 13.37

324.30 48.00 9.00 24.00

DSR-12

Page 1354 of 2298

2.00

391.30 245.70 259.35 31.61 50.36 3238.09 32.38 3270.47 490.57 3761.04

h directions 0.63 mm dia wire for doors, m wood.

Amount

3341.00 5.15 34.95

324.30 48.00 9.00 24.00 2.00

391.30 245.70 259.35 31.61 50.36 4766.72 47.67

DSR-12

Page 1355 of 2298

4814.39 722.16 5536.55

h directions 0.63 mm dia wire for doors,

Amount

3700.80 5.15

324.30 138.00 25.00 93.60 7.60 391.30 245.70 259.35 31.61 50.36 5272.77 52.73 5325.50 798.83 6124.33

h directions 0.63 mm dia wire for doors, hollock wood.

DSR-12

Page 1356 of 2298

Amount

1799.00 5.15 34.95 13.37

324.30 138.00 25.00 93.60 7.60 391.30 245.70 259.35 31.61 50.36 3419.29 34.19 3453.48 518.02 3971.50

h directions 0.63 mm dia wire for doors, ham wood.

Amount

DSR-12

Page 1357 of 2298

3341.00 5.15 34.95

324.30 138.00 25.00 93.60 7.60 391.30 245.70 259.35 31.61 50.36 4947.92 49.48 4997.40 749.61 5747.01

h directions 0.63 mm dia wire for doors,

Amount

3168.00 4.40

324.30 48.00

DSR-12

Page 1358 of 2298

9.00 24.00 2.00

361.20 218.40 247.00 30.10 50.36 4486.76 44.87 4531.63 679.74 5211.37

h directions 0.63 mm dia wire for doors, hollock wood.

Amount

1540.00 4.40 29.92 13.56

324.30 48.00 9.00 24.00 2.00

361.20 218.40

DSR-12

Page 1359 of 2298

247.00 30.10 50.36 2902.24 29.02 2931.26 439.69 3370.95

h directions 0.63 mm dia wire for doors, ham wood.

Amount

2860.00 4.40 29.92

324.30 48.00 9.00 24.00 2.00

361.20 218.40 247.00 30.10 50.36 4208.68 42.09 4250.77 637.62 4888.39

DSR-12

Page 1360 of 2298

h directions 0.63 mm dia wire for doors,

Amount

3168.00 4.40

324.30 138.00 25.00 93.60 7.60 361.20 218.40 247.00 30.10 50.36 4667.96 46.68 4714.64 707.20 5421.84

h directions 0.63 mm dia wire for doors, ck wood.

Amount

DSR-12

Page 1361 of 2298

1540.00 4.40 29.92 13.37

324.30 138.00 25.00 93.60 7.60 361.20 218.40 247.00 30.10 50.36 3083.25 30.83 3114.08 467.11 3581.19

h directions 0.63 mm dia wire for doors, d.

Amount

2860.00 4.40 29.92

DSR-12

Page 1362 of 2298

324.30 138.00 25.00 93.60 7.60 361.20 218.40 247.00 30.10 50.36 4389.88 43.90 4433.78 665.07 5098.85

windows 35 mm thick Amount

3879.40 44.16 48.00 9.00 24.00 2.00 149.24 148.20 53.46 4357.46 43.57 4401.03 660.15 5061.18

windows 30 mm thick Amount

DSR-12

Page 1363 of 2298

3296.30 44.16 48.00 9.00 24.00 2.00 149.24 148.20 53.46 3774.36 37.74 3812.10 571.82 4383.92

Amount

896.00 1.40 7.26

204.75 204.75 185.25 1499.41 14.99 1514.40 227.16 1741.56

Amount

DSR-12

Page 1364 of 2298

80.00 30.99 110.99 1.11 112.10 16.82 128.92

Amount

90.00 38.74 128.74 1.29 130.03 19.50 149.53

Amount

120.00 38.74 158.74 1.59 160.33 24.05 184.38

Amount

DSR-12

Page 1365 of 2298

140.00 38.74 178.74 1.79 180.53 27.08 207.61

40 mm thick Amount

31680.00 5060.00

958.10 A 258.30 B 44.05

647.15 400.14 80.19 39127.93 379.12 39507.05 5743.60 45250.65

25 mm thick. Amount

19800.00 3162.50 27.53

DSR-12

Page 1366 of 2298

958.10 A 258.30 B

647.15 400.14 80.19 25333.91 241.18 25575.09 3653.80 29228.89

20 mm thick Amount

15840.00 2530.00 22.02

958.10 A 258.30 B

325.08 218.40 266.76 80.19 20498.85 192.82 20691.67 2921.29 23612.96

12 mm thick Amount

DSR-12

Page 1367 of 2298

9504.00 1518.00 13.21

958.10 A

325.08 218.40 266.76 258.30 B 80.19 13142.04 119.26 13261.30 1806.74 15068.04

inated one side decorative lamination on

Amount

7590.00 20.14 40.10 258.30 A

349.44 353.21 550.00 9161.19 89.03 9250.22 1348.79 10599.01

DSR-12

Page 1368 of 2298

inated one side decorative lamination on

Amount

8910.00 20.14 40.10 258.30 A

349.44 353.21 550.00 10481.19 102.23 10583.42 1548.77 12132.19

inated one side decorative lamination on

Amount

9680.00 20.14 40.10 258.30 A

349.44 353.21 550.00 11251.19 109.93 11361.12 1665.42

DSR-12

Page 1369 of 2298

13026.54

ing Hollock wood. Amount

1155.00 3.30 301.00 61.75 10.07

96.86 A 550.00 106.54 2284.52 21.88 2306.40 331.43 2637.83

approved manufacture.

Amount

4800.00 8.14

958.10 A

1143.80 1136.20 180.60 80.19

DSR-12

Page 1370 of 2298

258.30 B 8565.33 73.49 8638.82 1113.36 9752.18

Amount

3264.00 8.14

958.10 A

1143.80 1136.20 180.60 80.19 258.30 B 7029.33 58.13 7087.46 880.66 7968.12

nat- ion) flat pressed,3 layer and graded

Amount

5346.00 12.08

DSR-12

Page 1371 of 2298

1020.00 193.70

210.21 212.42 80.19 154.98 A 7229.58 70.75 7300.33 1071.80 8372.13

nat- ion) flat pressed,3 layer and graded

Amount

5808.00 12.08 1020.00 193.70

210.21 212.42 80.19 154.98 A 7691.58 75.37 7766.95 1141.80 8908.75

class teak wood : 50 x 12 mm.

DSR-12

Page 1372 of 2298

Amount

237.60 0.33 18.00

9.56 A

159.53 425.02 4.15 429.17 62.94 492.11

class teak wood : 50 x 20 mm.

Amount

396.00 0.55 18.00

11.62 A

159.53 585.70 5.74 591.44 86.97 678.41

DSR-12

Page 1373 of 2298

ock wood : 50 x 12 mm. Amount

115.50 0.33 18.00

9.56 A

159.53 302.92 2.93 305.85 44.44 350.29

ock wood : 50 x 20 mm. Amount

192.50 0.55 18.00

11.62 A

159.53 382.20 3.71 385.91 56.14 442.05

DSR-12

Page 1374 of 2298

y) i/c fixing 50 x 12mm beading :- Second

Amount

2304.00 3.20 225.75 273.00 123.50 30.10 50.36 3009.91 30.10 3040.01 456.00 3496.01

cial plywood, MS nickel pipe 20mm dia

Amount

124.80

91.80 110.55 12.00 0.77 12.01 11.20 20.00

DSR-12

Page 1375 of 2298

49.14 44.46 33.11 4.07 513.91 5.14 519.05 77.86 596.91

eneer board, nickle plated MS pipe 20 mm

Amount

304.00

99.09 110.55 12.00 0.77 12.01 11.20 20.00 49.14 44.46 33.11 4.07 700.40 7.00 707.40 106.11 813.51

Amount

DSR-12

Page 1376 of 2298

49.60 49.60 0.50 50.10 7.52 57.62

Amount

145.60 145.60 1.46 147.06 22.06 169.12

Amount

200.00 68.25 61.75 330.00 3.30 333.30 50.00 383.30

DSR-12

Page 1377 of 2298

Amount

360.00 14.00 6.00 2.32

34.84 A 4.07 2.32 423.55 3.89 427.44 58.89 486.33

Amount

500.00 14.00 6.00 2.32

34.84 A 4.07 2.32 563.55 5.29 568.84 80.10 648.94

Amount

DSR-12

Page 1378 of 2298

660.00 14.00 6.00 2.32

34.84 A 4.07 2.32 723.55 6.89 730.44 104.34 834.78

Amount

134.00 12.00 6.00 2.32 20.00 7.75 2.32 184.39 1.84 186.23 27.93 214.16

Amount

150.00 14.00 6.00 2.32 20.00 7.75 2.32 202.39 2.02 204.41 30.66

DSR-12

Page 1379 of 2298

235.07

Amount

660.00 168.00 1.56 40.10 29.44

22.38 A

258.86 271.70 1452.04 14.30 1466.34 216.59 1682.93

with rawl plugs screws etc

Amount

660.00

DSR-12

Page 1380 of 2298

168.00

1.56 40.10 29.44

22.38 A

258.86 271.70 80.00

38.74 1570.78 15.48 1586.26 234.58 1820.84

x19mm beading of 2nd class teak wood

Amount

456.30 2.71

31.91 A

DSR-12

Page 1381 of 2298

432.00 0.60 90.09 61.75 40.10 1115.46 10.84 1126.30 164.16 1290.46

sqm to window frames etc. i/c 62 x 19mm

Amount

726.70 2.71

31.91 A

432.00 0.60 90.09 61.75 29.44 1375.20 13.43 1388.63 203.51 1592.14

h average width of aperture 1.4 mm of dia.

DSR-12

Page 1382 of 2298

Amount

388.70 2.71

432.00 0.60 90.09 61.75 29.44 1005.29 10.05 1015.34 152.30 1167.64

h average width of aperture 1.4 mm of dia.

Amount

388.70 2.71 70.00 90.09 61.75 29.44 642.69 6.43 649.12 97.37 746.49

DSR-12

Page 1383 of 2298

in panelled and glazed door and window

Amount

430.00 -310.00 120.00 1.20 121.20 18.18 139.38

Amount

28.14 2.71

23.91 A 8.14 8.19 9.03 7.41 87.53 0.64 88.17 9.64 97.81

exposed surfaces, etc. complete with :- Sal

Amount

DSR-12

Page 1384 of 2298

10355.00 20.72 10.09 A

191.10 358.15 182.00 40.10 11157.16 111.47 11268.63 1688.78 12957.41

unexposed surfaces, etc. complete with :-

Amount

6420.10 20.72 10.09 A

191.10 358.15 182.00 40.10 7222.26 72.12 7294.38 1092.64 8387.02

65 x 2.12 mm. Amount

130.00 48.00 4.07

DSR-12

Page 1385 of 2298

38.22 22.23 242.52 2.43 244.95 36.74 281.69

x 58 x 1.90 mm._x000D_

Amount 80.00 40.00

4.07 38.22 22.23 184.52 1.85 186.37 27.96 214.33

7 x 1.70 mm. Amount

60.00 24.00 2.71 38.22 22.23 147.16 1.47 148.63 22.29 170.92

DSR-12

Page 1386 of 2298

7 X 1.50 mm. Amount

45.00 10.00 1.36 21.84 78.20 0.78 78.98 11.85 90.83

5 x 90 x 4.00 mm. Amount

320.00 48.00 4.07 38.22 22.23 432.52 4.33 436.85 65.53 502.38

0 x 75 x 3.50 mm. Amount

160.00 40.00 4.07 38.22 22.23 264.52 2.65 267.17

DSR-12

Page 1387 of 2298

40.08 307.25

x 60 x 3.10 mm. Amount

83.00 24.00 2.71 38.22 22.23 170.16 1.70 171.86 25.78 197.64

x 40 x 2.50 mm. Amount

70.00 10.00 1.36 21.84 103.20 1.03 104.23 15.63 119.86

12 mm. Amount

130.00 56.00

DSR-12

Page 1388 of 2298

5.42 38.22 22.23 251.87 2.52 254.39 38.16 292.55

0 mm. Amount

80.00 40.00 4.07 38.22 22.23 184.52 1.85 186.37 27.96 214.33

0 mm. Amount

55.00 27.00 2.71 38.22 22.23 145.16 1.45 146.61 21.99 168.60

0 mm.

DSR-12

Page 1389 of 2298

Amount

45.00 12.00 1.36 21.84 80.20 0.80 81.00 12.15 93.15

0x125x27x2.80 mm Amount

320.00 40.00 4.07 38.22 34.58 436.87 4.37 441.24 66.19 507.43

5x125x27x2.80 mm Amount

300.00 40.00 4.07 38.22 34.58 416.87 4.17 421.04 63.16 484.20

DSR-12

Page 1390 of 2298

0x125x27x2.80 mm Amount

225.00 40.00 4.07 38.22 34.58 341.87 3.42 345.29 51.79 397.08

x 100 x 20 x 2.24 mm.

Amount

190.00 27.00 4.07 38.22 34.58 293.87 2.94 296.81 44.52 341.33

mm._x000D_ Amount 1050.00 56.00 4.07

DSR-12

Page 1391 of 2298

109.20 49.40 1268.67 12.69 1281.36 192.20 1473.56

m. Amount

1000.00 56.00 4.07 109.20 49.40 1218.67 12.19 1230.86 184.63 1415.49

m. Amount

800.00 40.00 4.07 109.20 49.40 1002.67 10.03 1012.70 151.91 1164.61

DSR-12

Page 1392 of 2298

mm. Amount

1100.00 56.00 4.07 109.20 49.40 1318.67 13.19 1331.86 199.78 1531.64

mm. Amount

1050.00 56.00 4.07 109.20 49.40 1268.67 12.69 1281.36 192.20 1473.56

mm. Amount

850.00 40.00 4.07 109.20 49.40 1052.67

DSR-12

Page 1393 of 2298

10.53 1063.20 159.48 1222.68

Amount

40.00 9.00 2.71 38.22 22.23 112.16 1.12 113.28 16.99 130.27

Amount

39.00 9.00 2.71 38.22 22.23 111.16 1.11 112.27 16.84 129.11

Amount

49.00

DSR-12

Page 1394 of 2298

9.00 2.71 38.22 22.23 121.16 1.21 122.37 18.36 140.73

Amount

900.00 48.00 200.00 9.49 68.25 1225.74 12.26 1238.00 185.70 1423.70

Amount

800.00 40.00 200.00 9.49 68.25 1117.74 11.18 1128.92 169.34 1298.26

DSR-12

Page 1395 of 2298

Amount

400.00 45.00 5.42 27.30 477.72 4.78 482.50 72.38 554.88

Amount

350.00 36.00 4.07 27.30 417.37 4.17 421.54 63.23 484.77

Amount

250.00 27.00 4.07 27.30 308.37 3.08 311.45 46.72 358.17

DSR-12

Page 1396 of 2298

Amount

200.00 27.00 4.07 21.84 252.91 2.53 255.44 38.32 293.76

Amount

440.00 9.49 68.25 517.74 5.18 522.92 78.44 601.36

20 x 6 mm. Amount

450.00 31.50 5.42 32.76 519.68 5.20 524.88 78.73 603.61

DSR-12

Page 1397 of 2298

20 x 6 mm. Amount

400.00 31.50 5.42 32.76 469.68 4.70 474.38 71.16 545.54

Amount

170.00 14.00 4.07 16.38 204.45 2.04 206.49 30.97 237.46

Amount

150.00 14.00 2.71 16.38 183.09 1.83

DSR-12

Page 1398 of 2298

184.92 27.74 212.66

Amount

140.00 14.00 2.71 16.38 173.09 1.73 174.82 26.22 201.04

Amount

120.00 28.00 2.71 21.84 172.55 1.73 174.28 26.14 200.42

Amount

100.00 24.50 2.71 21.84

DSR-12

Page 1399 of 2298

149.05 1.49 150.54 22.58 173.12

Amount

75.00 24.50 2.71 21.84 124.05 1.24 125.29 18.79 144.08

mm weighing not less than 200 gms.

Amount 210.00 18.00 1.36 27.30 256.66 2.57 259.23 38.88 298.11

mm weighing not less than 150 gms.

Amount

180.00

DSR-12

Page 1400 of 2298

14.00 1.36 27.30 222.66 2.23 224.89 33.73 258.62

mm weighing not less than 120 gms.

Amount

170.00 14.00 1.36 27.30 212.66 2.13 214.79 32.22 247.01

Amount

600.00 21.00 1.36 27.30 649.66 6.50 656.16 98.42 754.58

mm. Amount

DSR-12

Page 1401 of 2298

240.00 192.00 4.07 38.22 22.23 496.52 4.97 501.49 75.22 576.71

mm. Amount

215.00 156.00 4.07 38.22 22.23 435.52 4.36 439.88 65.98 505.86

m. Amount

145.00 87.00 2.71 38.22 22.23 295.16 2.95 298.11 44.72 342.83

DSR-12

Page 1402 of 2298

m. Amount

125.00 38.00 1.36 21.84 186.20 1.86 188.06 28.21 216.27

25 x 64 x 2.50 mm.

Amount

320.00 192.00 4.07 38.22 22.23 576.52 5.77 582.29 87.34 669.63

00 x 60 x 2.50 mm.

Amount

230.00 156.00 4.07 38.22 22.23 450.52

DSR-12

Page 1403 of 2298

4.51 455.03 68.25 523.28

5 x 50 x 2.50 mm.

Amount

195.00 87.00 2.71 38.22 22.23 345.16 3.45 348.61 52.29 400.90

Amount

2900.00 200.00 5.42 42.14 24.70 3172.26 31.72 3203.98 480.60 3684.58

Amount

DSR-12

Page 1404 of 2298

800.00 200.00 5.42 42.14 24.70 1072.26 10.72 1082.98 162.45 1245.43

Amount

2600.00 128.00 4.07 42.14 24.70 2798.91 27.99 2826.90 424.04 3250.94

Amount

650.00 128.00 4.07 42.14 24.70 848.91 8.49 857.40 128.61 986.01

DSR-12

Page 1405 of 2298

Amount

900.00 78.00 4.07 42.14 24.70 1048.91 10.49 1059.40 158.91 1218.31

Amount

400.00 78.00 4.07 42.14 24.70 548.91 5.49 554.40 83.16 637.56

Amount

175.00 32.00 2.71 24.08 233.79 2.34 236.13 35.42 271.55

DSR-12

Page 1406 of 2298

Amount

2600.00 128.00 4.07 42.14 34.58 2808.79 28.09 2836.88 425.53 3262.41

Amount

2300.00 128.00 4.07 42.14 34.58 2508.79 25.09 2533.88 380.08 2913.96

Amount 2000.00 128.00 4.07 42.14 34.58

DSR-12

Page 1407 of 2298

2208.79 22.09 2230.88 334.63 2565.51

Amount

1600.00 78.00 4.07 42.14 34.58 1758.79 17.59 1776.38 266.46 2042.84

Amount 2250.00 130.00 6.78 30.10 2416.88 24.17 2441.05 366.16 2807.21

Amount 1750.00 104.00 4.07

DSR-12

Page 1408 of 2298

30.10 1888.17 18.88 1907.05 286.06 2193.11

Amount 1400.00 104.00 4.07 30.10 1538.17 15.38 1553.55 233.03 1786.58

Amount

900.00 78.00 4.07 30.10 1012.17 10.12 1022.29 153.34 1175.63

Amount

1600.00

DSR-12

Page 1409 of 2298

85.50 5.42 36.12 1727.04 17.27 1744.31 261.65 2005.96

Amount 1500.00 85.50 5.42 36.12 1627.04 16.27 1643.31 246.50 1889.81

er handles._x000D_ Amount

350.00

51.17 5.42 406.59 4.07 410.66 61.60 472.26

dles. Amount

DSR-12

Page 1410 of 2298

300.00 51.17 5.42 356.59 3.57 360.16 54.02 414.18

Amount 450.00 51.17 5.42 506.59 5.07 511.66 76.75 588.41

mm. Amount 65.00 51.17 5.42 121.59 1.22 122.81 18.42 141.23

mm. Amount

70.00

DSR-12

Page 1411 of 2298

51.17 5.42 126.59 1.27 127.86 19.18 147.04

mm. Amount 75.00

51.17 5.42 131.59 1.32 132.91 19.94 152.85

mm. Amount 95.00 51.17 5.42 151.59 1.52 153.11 22.97 176.08

Amount 300.00 4.07

DSR-12

Page 1412 of 2298

42.14 346.21 3.46 349.67 52.45 402.12

Amount 1400.00 38.00 4.07 18.06 1460.13 14.60 1474.73 221.21 1695.94

Amount 1250.00 38.00 1.36 18.06 1307.42 13.07 1320.49 198.07 1518.56

Amount 950.00 38.00 1.36

DSR-12

Page 1413 of 2298

18.06 1007.42 10.07 1017.49 152.62 1170.11

Amount

600.00 19.00 4.07 9.03 632.10 6.32 638.42 95.76 734.18

complete. _x000D_ Amount 5350.00 78.00 5.42 273.00 5706.42 57.06 5763.48 864.52 6628.00

Amount 8100.00 78.00

DSR-12

Page 1414 of 2298

1.49 273.00 8452.49 84.52 8537.01 1280.55 9817.56

Amount 450.00 38.00 1.36 30.10 519.46 5.19 524.65 78.70 603.35

Amount 1200.00 52.00 1.36 30.10 1283.46 12.83 1296.29 194.44 1490.73

Amount

1000.00

DSR-12

Page 1415 of 2298

38.00 1.36 30.10 1069.46 10.69 1080.15 162.02 1242.17

Amount 900.00 38.00 1.36 30.10 969.46 9.69 979.15 146.87 1126.02

Amount 700.00 76.00 2.71 24.08 802.79 8.03 810.82 121.62 932.44

Amount 600.00

DSR-12

Page 1416 of 2298

56.00 2.71 24.08 682.79 6.83 689.62 103.44 793.06

Amount 500.00 56.00 2.71 24.08 582.79 5.83 588.62 88.29 676.91

dles with n/ascrews. Amount 500.00 51.17 5.42 556.59 5.57 562.16 84.32 646.48

Amount 500.00

DSR-12

Page 1417 of 2298

51.17 5.42 556.59 5.57 562.16 84.32 646.48

Amount 62.00 51.17 5.42 118.59 1.19 119.78 17.97 137.75

Amount 70.00 51.17 5.42 126.59 1.27 127.86 19.18 147.04

Amount 82.00 51.17 5.42 138.59

DSR-12

Page 1418 of 2298

1.39 139.98 21.00 160.98

Amount

103.00 51.17 5.42 159.59 1.60 161.19 24.18 185.37

Amount 450.00 4.07 42.14 496.21 4.96 501.17 75.18 576.35

Amount 1600.00 38.00 4.07 18.06 1660.13 16.60

DSR-12

Page 1419 of 2298

1676.73 251.51 1928.24

Amount

1400.00 38.00 1.36 18.06 1457.42 14.57 1471.99 220.80 1692.79

Amount 1200.00 38.00 1.36 18.06 1257.42 12.57 1269.99 190.50 1460.49

Amount 900.00 46.00 1.36 30.10 977.46

DSR-12

Page 1420 of 2298

9.77 987.23 148.08 1135.31

Amount 1400.00 46.00 1.36 30.10 1477.46 14.77 1492.23 223.83 1716.06

Amount 1200.00 46.00 1.36 30.10 1277.46 12.77 1290.23 193.53 1483.76

Amount

1000.00 46.00 1.36 30.10

DSR-12

Page 1421 of 2298

1077.46 10.77 1088.23 163.23 1251.46

Amount 550.00 230.00 5.42 42.14 22.23 849.79 8.50 858.29 128.74 987.03

Amount 510.00 230.00 5.42 42.14 22.23 809.79 8.10 817.89 122.68 940.57

Amount 500.00 152.00 4.07

DSR-12

Page 1422 of 2298

42.14 22.23 720.44 7.20 727.64 109.15 836.79

Amount 490.00 152.00 4.07 42.14 22.23 710.44 7.10 717.54 107.63 825.17

Amount 480.00 152.00 4.07 42.14 22.23 700.44 7.00 707.44 106.12 813.56

Amount

DSR-12

Page 1423 of 2298

475.00 90.00 2.71 42.14 22.23 632.08 6.32 638.40 95.76 734.16

Amount 450.00 90.00 2.71 42.14 22.23 607.08 6.07 613.15 91.97 705.12

Amount 390.00 90.00 2.71 42.14 22.23 547.08 5.47 552.55 82.88 635.43

DSR-12

Page 1424 of 2298

Amount 1550.00 46.00 8.14 150.50 1754.64 17.55 1772.19 265.83 2038.02

Amount 1250.00 46.00 8.14 150.50 1454.64 14.55 1469.19 220.38 1689.57

Amount 700.00 120.00 6.59 37.63 864.22 8.64 872.86 130.93 1003.79

DSR-12

Page 1425 of 2298

Amount 580.00 120.00 6.59 37.63 744.22 7.44 751.66 112.75 864.41

Amount 450.00 120.00 4.07

37.63 611.70 6.12 617.82 92.67 710.49

Amount 360.00 120.00 4.07 24.08 508.15 5.08 513.23 76.98 590.21

DSR-12

Page 1426 of 2298

Amount 280.00 90.00 4.07

24.08 398.15 3.98 402.13 60.32 462.45

Amount 460.00 9.49 68.25 537.74 5.38 543.12 81.47 624.59

Amount 1250.00 46.00 8.14 21.07 12.35 1337.56 13.38

DSR-12

Page 1427 of 2298

1350.94 202.64 1553.58

Amount 470.00 46.00 4.07

18.06 538.13 5.38 543.51 81.53 625.04

Amount 360.00 46.00 2.71 18.06 426.77 4.27 431.04 64.66 495.70

Amount 300.00 40.00 2.71 18.06

DSR-12

Page 1428 of 2298

360.77 3.61 364.38 54.66 419.04

Amount 210.00 23.00 4.07 9.03 246.10 2.46 248.56 37.28 285.84

Amount 580.00 23.00 4.07 9.03 616.10 6.16 622.26 93.34 715.60

IS : 1868). Amount

460.00 46.00 1.36 30.10

DSR-12

Page 1429 of 2298

537.46 5.37 542.83 81.42 624.25

oved quality). Amount

250.00 300.00 51.17 6.78 607.95 6.08 614.03 92.10 706.13

Amount 90.00 4.07 2.13 96.20 0.96 97.16 14.57 111.73

erall thickness partition with 8.5 mm thick

Amount 10074.00 720.00 2890.80

DSR-12

Page 1430 of 2298

219.52

1056.00 180.00 77.08 313.30 81.76 669.80 88.00 14.08 77.48 193.70 1977.57 777.23 298.94 1893.26 21602.52 216.03 21818.55 3272.78 25091.33

rall thickness partition with 12.5 mm plain

Amount 7008.00 720.00 2890.80 219.52

1056.00 180.00 77.08 313.30 81.76 669.80 88.00 14.08 77.48 193.70

DSR-12

Page 1431 of 2298

1977.57 777.23 298.94 1893.26 18536.52 185.37 18721.89 2808.28 21530.17

verall thickness partition with 8 mm thick

Amount 9767.40 720.00 2890.80 219.52

1056.00 180.00 77.08 313.30 81.76 669.80 88.00 14.08 77.48 193.70 1977.57 777.23 298.94 1893.26 21295.92 212.96 21508.88 3226.33 24735.21

DSR-12

Page 1432 of 2298

erall thickness partition using 8 mm thick

Amount 9022.80 720.00 2890.80 219.52

1056.00 180.00 77.08 313.30 81.76 669.80 88.00 14.37 77.48 193.70 1977.57 777.23 298.94 1893.26 20551.61 205.52 20757.13 3113.57 23870.70

an 24 grams. Amount 300.00 12.00 4.07 16.38 332.45 3.32 335.77 50.37 386.14

DSR-12

Page 1433 of 2298

an 24 grams. Amount 340.00 12.00 4.07 16.38 372.45 3.72 376.17 56.43 432.60

m dia. M.S bright bar.

Amount 420.00 24.00 2.71 38.22 22.23 507.16 5.07 512.23 76.83 589.06

mm dia. M.S bright bar.

Amount 560.00 40.00 4.07 38.22 22.23 664.52 6.65 671.17

DSR-12

Page 1434 of 2298

100.68 771.85

8 mm weighing not less than 60 grams.

Amount 650.00 24.00 4.07 21.84 699.91 7.00 706.91 106.04 812.95

8 mm weighing not less than 78 grams.

Amount 800.00 32.00 4.07 27.30 863.37 8.63 872.00 130.80 1002.80

g 33 grams. Amount 270.00 6.00 4.07 9.03 289.10

DSR-12

Page 1435 of 2298

2.89 291.99 43.80 335.79

Amount

289.80 7.20

122.14 0.39 30.17 68.25 61.75 14.97 594.67 5.95 600.62 90.09 690.71

Amount

495.36 0.69 3.00

12.92 A

DSR-12

Page 1436 of 2298

225.75 737.72 7.25 744.97 109.81 854.78

Amount 250.00

68.25 61.75 380.00 3.80 383.80 57.57 441.37

Amount 310.00 39.13 3.87 353.00 3.53 356.53 53.48 410.01

Amount 15.00 3.87 18.87 0.19

DSR-12

Page 1437 of 2298

19.06 2.86 21.92

Amount 12.00 3.87 15.87 0.16 16.03 2.40 18.43

Amount 1350.00 29.06 149.15 1528.21 15.28 1543.49 231.52 1775.01

Amount 8.00 1.55 9.55 0.10 9.65 1.45 11.10

DSR-12

Page 1438 of 2298

file size 48 x 40 mm. Amount 710.00

43.05 37.05 6.97 797.07 7.97 805.04 120.76 925.80

Amount

675.00 43.05 37.05 6.97 762.07 7.62 769.69 115.45 885.14

Amount

4819.50

114.80 98.80 30.34 5063.44 50.63 5114.07 767.11

DSR-12

Page 1439 of 2298

5881.18

moulding edging. Amount

5057.50

114.80 98.80 30.34 5301.44 53.01 5354.45 803.17 6157.62

ce Multi chamber extruded PVC section of

Amount

4879.00 114.80 98.80 30.34 5122.94 51.23 5174.17 776.13 5950.30

Amount

1650.00

DSR-12

Page 1440 of 2298

43.05 37.05 11.62 1741.72 17.42 1759.14 263.87 2023.01

Amount

4819.50 31.60 24.00 2.00 114.80 98.80 30.34 5121.04 51.21 5172.25 775.84 5948.09

el P.V.C. door shutter.

Amount

5759.60 31.60 24.00 2.00 114.80 98.80 30.34 6061.14 60.61 6121.75 918.26 7040.01

DSR-12

Page 1441 of 2298

Amount 1825.00

43.05 37.05 11.62 1916.72 19.17 1935.89 290.38 2226.27

or shutter. Amount 4081.70 31.60 24.00 2.00 114.80 98.80 30.34 4383.24 43.83 4427.07 664.06 5091.13

hutter. Amount

4700.50 31.60 24.00

DSR-12

Page 1442 of 2298

2.00 114.80 98.80 30.34 5002.04 50.02 5052.06 757.81 5809.87

mm width and 30 mm thick.

Amount

1350.00

43.05 37.05 11.62 1441.72 14.42 1456.14 218.42 1674.56

Amount 5045.60 31.60 24.00 2.00

114.80 98.80 30.34 5347.14 53.47 5400.61 810.09 6210.70

DSR-12

Page 1443 of 2298

wood grains) Amount 5950.00 31.60 24.00 2.00

114.80 98.80 30.34 6251.54 62.52 6314.06 947.11 7261.17

Amount

57.09

32.54 33.11 34.58 6.02 163.34 1.63 164.97 24.75 189.72

rs for doors, windows: Marine plywood of

Amount

DSR-12

Page 1444 of 2298

660.00 2.71 171.57 6.59 840.87 8.41 849.28 127.39 976.67

ers for doors, windows: Fire retardant ply

Amount

688.00 2.71 171.57 6.59 868.87 8.69 877.56 131.63 1009.19

nish with high density: 1.50 mm thick.

Amount

2612.50

DSR-12

Page 1445 of 2298

290.55 150.50 123.50 77.48 3254.53 32.55 3287.08 493.06 3780.14

nish with high density: 1.00 mm thick.

Amount

1925.00 290.55 150.50 123.50 77.48 2567.03 25.67 2592.70 388.91 2981.61

Amount

1868.40 38.74 213.07 2120.21 21.20 2141.41 321.21 2462.62

DSR-12

Page 1446 of 2298

ne side decorative lamination i/c IInd Class

Amount

1914.00 44.16 162.80 43.75 150.50 123.50 21.07 273.00 2732.78 27.33 2760.11 414.02 3174.13

exterior grade-I of approved make: with

Amount

1012.00 517.00 44.16 162.80 43.75 150.50 123.50 21.07 273.00 2347.78 23.48 2371.26 355.69 2726.95

rior grade-I of approved make: With non-

DSR-12

Page 1447 of 2298

Amount

1012.00 341.00 44.16 162.80 43.75 150.50 123.50 21.07 273.00 2171.78 21.72 2193.50 329.03 2522.53

side decorative finish: 25 mm thick.

Amount

1745.90 52.00 80.00 20.25 29.06 58.11 73.71 74.10 2133.13 21.33 2154.46 323.17 2477.63

Amount

DSR-12

Page 1448 of 2298

228.80 96.85 19.37 345.02 3.45 348.47 52.27 400.74

m silicate board made with calcareous and

Amount

4543.60 766.74 240.00 79.80 126.72 30.99 26.60 77.48 38.74 1143.80 1136.20 8210.67 82.11 8292.78 1243.92 9536.70

ultipurpose cement board reinfoced with

Amount

2529.68

DSR-12

Page 1449 of 2298

766.74 240.00 79.80 126.72 30.99 26.60 77.48 38.74 1143.80 1136.20 6196.75 61.97 6258.72 938.81 7197.53

nforming to IS: 2095-1996 Part-I: 12.5 mm

Amount

1964.80 766.74 240.00 79.80 126.72 30.99 26.60 77.48 38.74 1143.80 1136.20 5631.87 56.32 5688.19 853.23 6541.42

oth directions 0.63 mm dia wire for doors,

Amount

DSR-12

Page 1450 of 2298

3700.80

1071.60 48.00 9.00 24.00 2.00 5.15 391.30 245.70 259.35 31.61 50.36 5838.87 58.39 5897.26 884.59 6781.85

e 1.4 mm in both directions 0.63 mm dia mically treated hollock wood.

Amount

DSR-12

Page 1451 of 2298

1799.00 5.15 34.95 13.37

1071.60 48.00 9.00 24.00 2.00

391.30 245.70 259.35 31.61 50.36 3985.39 39.85 4025.24 603.79 4629.03

e 1.4 mm in both directions 0.63 mm dia cted class sesham wood.

Amount

3341.00 5.15 34.95

1071.60

DSR-12

Page 1452 of 2298

48.00 9.00 24.00 2.00

391.30 245.70 259.35 31.61 50.36 5514.02 55.14 5569.16 835.37 6404.53

e 1.4 mm in both directions 0.63 mm dia wood

Amount

3700.80 5.15

1071.60 138.00 25.00 93.60 7.60 391.30 245.70 259.35 31.61

DSR-12

Page 1453 of 2298

50.36 6020.07 60.20 6080.27 912.04 6992.31

e 1.4 mm in both directions 0.63 mm dia mically treated hollock wood.

Amount

1799.00 5.15 34.95 13.37

1071.60 138.00 25.00 93.60 7.60 391.30 245.70 259.35 31.61 50.36 4166.59 41.67 4208.26 631.24 4839.50

DSR-12

Page 1454 of 2298

e 1.4 mm in both directions 0.63 mm dia cted class sesham wood.

Amount

3341.00 5.15 34.95

1071.60 138.00 25.00 93.60 7.60 391.30 245.70 259.35 31.61 50.36 5695.22 56.95 5752.17 862.83 6615.00

e 1.4 mm in both directions 0.63 mm dia wood

Amount

DSR-12

Page 1455 of 2298

3168.00 4.40

1071.60 48.00 9.00 24.00 2.00

361.20 218.40 247.00 30.10 50.36 5234.06 52.34 5286.40 792.96 6079.36

e 1.4 mm in both directions 0.63 mm dia mically treated hollock wood.

Amount

1540.00 4.40 29.92 13.37

DSR-12

Page 1456 of 2298

1071.60 48.00 9.00 24.00 2.00

361.20 218.40 247.00 30.10 50.36 3649.35 36.49 3685.84 552.88 4238.72

e 1.4 mm in both directions 0.63 mm dia cted class of sesham wood.

Amount

2860.00 4.40 29.92

1071.60 48.00 9.00 24.00

DSR-12

Page 1457 of 2298

2.00

361.20 218.40 247.00 30.10 50.36 4955.98 49.56 5005.54 750.83 5756.37

e 1.4 mm in both directions 0.63 mm dia d

Amount

3168.00 4.40

1071.60 138.00 25.00 93.60 7.60 361.20 218.40 247.00 30.10 50.36 5415.26 54.15 5469.41 820.41 6289.82

DSR-12

Page 1458 of 2298

e 1.4 mm in both directions 0.63 mm dia ly treated hollock wood.

Amount

1540.00 4.40 29.92 13.37

1071.60 138.00 25.00 93.60 7.60 361.20 218.40 247.00 30.10 50.36 3830.55 38.31 3868.86 580.33 4449.19

e 1.4 mm in both directions 0.63 mm dia f sesham wood.

Amount

DSR-12

Page 1459 of 2298

2860.00 4.40 29.92

1071.60 138.00 25.00 93.60 7.60 361.20 218.40 247.00 30.10 50.36 5137.18 51.37 5188.55 778.28 5966.83

average width of aperture 1.4 mm in both

Amount

1284.40 2.71

DSR-12

Page 1460 of 2298

432.00 0.60 90.09 61.75 29.44 1900.99 19.01 1920.00 288.00 2208.00

average width of aperture 1.4 mm in both

Amount

1284.40 2.71 70.00 90.09 61.75 29.44 1538.39 15.38 1553.77 233.07 1786.84

Amount 0.00 193.70 6.30 200.00 2.00

DSR-12

Page 1461 of 2298

202.00 30.30 232.30

of vertical styles, lock rail, top rail 100mm

Amount 16975.00 268.20 14.90 17258.10 172.58 17430.68 2614.60 20045.28

h clear fire resistant glass panes 6mm thick

Amount

125928.00

6303.44 2025.00 4735.24 268.20 14.90 139274.78 1392.75 140667.53 21100.13

DSR-12

Page 1462 of 2298

161767.66

& Lock on back side of the Panic Latch

Amount 5000.00 51.17 5.42 5056.59 50.57 5107.16 766.07 5873.23

ne face and fixed on wooden /steel frame

Amount 6380.00 258.30 A 59.75 367.36 353.21 50.00 7468.62 72.10 7540.72 1092.36 8633.08

e out of single piece extruded PVC profile

Amount 2250.00

DSR-12

Page 1463 of 2298

43.05 37.05 17.36 2347.46 23.47 2370.93 355.64 2726.57

d soild PVC profiles - Non decorative finish

Amount 4969.44 31.60 24.00 2.00 114.80 98.80 45.22 5285.86 52.86 5338.72 800.81 6139.53

uded soild PVC profiles - decorative finish

Amount 6035.68 31.60 24.00 2.00 114.80 98.80 45.22 6352.10 63.52 6415.62 962.34 7377.96

DSR-12

Page 1464 of 2298

size 65 mm x 55 mm .. ..

Amount 1590.00

43.05 37.05 6.97 1677.07 16.77 1693.84 254.08 1947.92

e of PVC hollow section of size 100mm x

Amount #REF!

114.80 98.80 30.34 #REF! #REF! #REF! #REF! #REF!

size 75mm x 53 mm, having wall thickness

Amount #REF!

43.05 37.05

DSR-12

Page 1465 of 2298

6.97 #REF! #REF! #REF! #REF! #REF!

ade of PVC hollow extruded printed and 0.2mm) ..

Amount #REF!

114.80 98.80 30.34 #REF! #REF! #REF! #REF! #REF!

oor made of extruded profiles - Casement

Amount #REF!

52.50

26.25

30.10 24.70 7.45 14.90 #REF! #REF! #REF! #REF! #REF!

DSR-12

Page 1466 of 2298

oor made of extruded profiles - Casement

Amount #REF!

52.50

26.25

30.10 24.70 7.45 14.90 #REF! #REF! #REF! #REF! #REF!

oor made of extruded profiles - Casement

Amount #REF!

52.50

26.25

30.10 24.70 7.45 14.90 #REF! #REF! #REF!

DSR-12

Page 1467 of 2298

#REF! #REF!

oor made of extruded profiles - Casement m x 34.5mm)

Amount #REF!

6.02 4.94 4.47 7.45 #REF! #REF! #REF! #REF! #REF!

oor made of extruded profiles - Casement

Amount #REF!

26.25

6.02 4.94 4.47 7.45 #REF! #REF! #REF! #REF! #REF!

DSR-12

Page 1468 of 2298

oor made of extruded profiles - Casement

Amount #REF!

52.50

30.10 24.70 7.45 14.90 #REF! #REF! #REF! #REF! #REF!

oor made of extruded profiles - Casement mm x 75mm ) (style, rail and intermediate

Amount 262.50

52.50

30.10 24.70 7.45 14.90 392.15 3.92 396.07 59.41 455.48

DSR-12

Page 1469 of 2298

oor made of extruded profiles - Casement

Amount 81.90

26.25

6.02 4.94 4.47 7.45 131.03 1.31 132.34 19.85 152.19

door made of extruded profiles - Sliding

Amount 246.75

52.50

42.00

30.10 24.70 7.45 22.35 425.85 4.26 430.11 64.52 494.63

DSR-12

Page 1470 of 2298

door made of extruded profiles - Sliding

Amount 222.60

52.50

31.50

30.10 24.70 7.45 22.35 391.20 3.91 395.11 59.27 454.38

door made of extruded profiles - Sliding ach shutter)( 45.5 mm x 28 mm)

Amount 47.25

15.75

15.05 12.35 4.47 7.45 102.32 1.02 103.34 15.50 118.84

DSR-12

Page 1471 of 2298

door made of extruded profiles - Sliding

Amount 81.90

26.25

6.02 4.94 4.47 7.45 131.03 1.31 132.34 19.85 152.19

or made of extruded profiles - Sliding Door

Amount 246.75

52.50

21.00

30.10 24.70 14.90 22.35 412.30 4.12 416.42 62.46 478.88

DSR-12

Page 1472 of 2298

or made of extruded profiles - Sliding Door

Amount 288.75

52.50

31.50 26.25

42.14 34.58 7.45 22.35 505.52 5.06 510.58 76.59 587.17

or made of extruded profiles - Sliding Door 45.5 mm x 28 mm)

Amount 47.25

15.75

15.05 12.35 4.47 7.45 102.32 1.02

DSR-12

Page 1473 of 2298

103.34 15.50 118.84

or made of extruded profiles - Sliding Door

Amount 81.90

26.25

6.02 4.94 4.47 7.45 131.03 1.31 132.34 19.85 152.19

with necessary stainless steel screws etc. -

Amount 2250.00 11.60 4.07 38.22 34.58 2338.47 23.38 2361.85 354.28 2716.13

DSR-12

Page 1474 of 2298

with necessary stainless steel screws etc. -

Amount 2750.00 11.60 4.07 38.22 34.58 2838.47 28.38 2866.85 430.03 3296.88

with necessary stainless steel screws etc.

Amount 3500.00 11.60 4.07 38.22 34.58 3588.47 35.88 3624.35 543.65 4168.00

h necessary stainless steel screws etc. -350

Amount 4000.00 11.60 4.07 38.22 34.58 4088.47 40.88 4129.35 619.40 4748.75

DSR-12

Page 1475 of 2298

h necessary stainless steel screws etc. -400

Amount 5000.00 11.60 4.07 38.22 34.58 5088.47 50.88 5139.35 770.90 5910.25

r uPVC casement window with necessary

Amount 1500.00 6.59 4.47 35.88 1546.94 15.47 1562.41 234.36 1796.77

w with necessary screws etc.

Amount 1000.00 6.59 4.47

DSR-12

Page 1476 of 2298

35.88 1046.94 10.47 1057.41 158.61 1216.02

Amount 500.00 6.59 4.47 35.88 546.94 5.47 552.41 82.86 635.27

e. Amount 800.00 6.59 4.47 35.88 846.94 8.47 855.41 128.31 983.72

oor with necessary screws etc. complete.

Amount 1000.00 6.59

DSR-12

Page 1477 of 2298

4.47 35.88 1046.94 10.47 1057.41 158.61 1216.02

hollow MS tube, placed along the walls,

Amount

2940.96 400.00

99.46 A

120.40 144.69 303.81 15.60 50.00 4074.92 39.75 4114.67 602.28 4716.95

applying a priming coat of approved steel

Amount

4462.50 8.18 150.50 204.75 247.00

DSR-12

Page 1478 of 2298

62.16 A 30.80 5165.89 51.04 5216.93 773.22 5990.15

ng a priming coat steel primer ..

Amount

6800.00

2199.50

8550.00

DSR-12

Page 1479 of 2298

328.32

285.66 32.32

812.70 982.80 1404.00 889.20 114.40

117.69 A 120.29 22636.88 225.19 22862.07 3411.66 26273.73

ron diagonals 20x5mm - etc

Amount

2252.50

552.50

DSR-12

Page 1480 of 2298

2520.00 9.81 400.96 100.34 250.00

217.56 A

903.00 1806.00 1638.00 150.50 136.50 1976.00 240.58 13154.25 129.37 13283.62 1959.91 15243.53

le iron, 3mm MS gusset plates, 25mm dia

Amount

2286.20

688.50

DSR-12

Page 1481 of 2298

5907.50

467.50 16.82 400.96 240.00 249.95 400.96 20.14

372.96 A

602.00 903.00 1092.00 988.00 18.06 16.38 240.58 14911.51 145.39 15056.90 2202.59 17259.49

plates .. ..Using MS angels 40x40x6mm for

Amount

DSR-12

Page 1482 of 2298

2286.20

703.80

3978.00 12.35 140.00 440.00 60.00 249.87 400.96

319.30 A

602.00 903.00 1092.00 18.06 16.38 1235.00 240.58 12697.50 123.78 12821.28 1875.30 14696.58

al braces and central cross piece

Amount

DSR-12

Page 1483 of 2298

2286.20

935.10

2354.50

789.60 11.27 140.00 440.00 60.00 249.87 400.96

304.58 A

602.00 903.00 1092.00 18.06 16.38 1235.00 240.58 12079.10 117.75 12196.85 1783.84 13980.69

DSR-12

Page 1484 of 2298

op cover -80x1.25mm M.S. laths with 1.25

Amount 8625.00 1375.00 250.00 80.19 767.55 629.85 36.12 32.76 90.26 11886.73 118.87 12005.60 1800.84 13806.44

op cover -80x1.20mm M.S. laths with 1.20

Amount 7575.00 762.50 250.00 80.19 767.55 629.85 36.12 32.76 90.26 10224.23 102.24 10326.47 1548.97 11875.44

S. top cover -80x0.90mm M.S. laths with

Amount 6975.00 675.00 250.00

DSR-12

Page 1485 of 2298

80.19 767.55 629.85 36.12 32.76 90.26 9536.73 95.37 9632.10 1444.82 11076.92

Amount 330.00 40.10 370.10 3.70 373.80 56.07 429.87

sqm upto 16.80sqm in the area. _x000D_

Amount 520.00 20.14 540.14 5.40 545.54 81.83 627.37

qm in area. Amount 550.00 20.14 570.14 5.70

DSR-12

Page 1486 of 2298

575.84 86.38 662.22

float glass panes with glazing clips (Only ck

Amount

43.04 A

51.17 24.08 21.84 123.50 100.25 363.88 3.21 367.09 48.61 415.70

glass panes with glazing clips (Only labour

Amount 51.17 41.99 100.25 193.41 1.93 195.34 29.30 224.64

s, side /top /centre hung, etc., - Fixing with

Amount

DSR-12

Page 1487 of 2298

1440.00 60.15 46.41 78.26 83.98 22.90 831.30 A

50.56 B 2613.56 17.32 2630.88 262.35 2893.23

s, side /top /centre hung, etc., - Fixing with

Amount 1440.00 60.15 46.41 78.26 83.98 22.90

50.56 A 1782.26 17.32 1799.58 262.35 2061.93

Amount

DSR-12

Page 1488 of 2298

20.00 0.69 4.48 25.17 0.25 25.42 3.81 29.23

applying a priming coat of approved steel . 1:3:6

Amount

765.00

24.60

8.40

43.04 A 48.00 53.46 26.73 7.94 27.30 45.15 49.40 13.37 1112.39 10.69 1123.08 162.01 1285.09

DSR-12

Page 1489 of 2298

applying a priming coat of approved steel

Amount

765.00

24.60 48.00 53.46 26.73 7.94 27.30 45.15 49.40 13.37 1060.95 10.61 1071.56 160.73 1232.29

g with adjustable lugs with split end tail to

Amount 1100.00

48.00 53.46

DSR-12

Page 1490 of 2298

127.50 7.94 45.15 49.40 13.37

55.74 A 1500.56 14.45 1515.01 218.89 1733.90

with carbon steel galvanised dash fastener

Amount 1100.00

-29.80 48.00 53.46

127.50 7.94 45.15 49.40 13.37

55.74 A 1470.76 14.15 1484.91 214.38 1699.29

DSR-12

Page 1491 of 2298

g with adjustable lugs with split end tail to

Amount 1200.00

48.00 53.46

127.50 7.94 45.15 49.40 13.37

55.74 A 1600.56 15.45 1616.01 234.04 1850.05

with carbon steel galvanised dash fastener

Amount 1200.00

-29.80 48.00 53.46

127.50 7.94 45.15 49.40 13.37

DSR-12

Page 1492 of 2298

55.74 A 1570.76 15.15 1585.91 229.53 1815.44

g with adjustable lugs with split end tail to

Amount 1350.00

48.00 53.46

127.50 7.94 45.15 49.40 13.37

55.74 A 1750.56 16.95 1767.51 256.77 2024.28

with carbon steel galvanised dash fastener

Amount 1350.00

-29.80 48.00

DSR-12

Page 1493 of 2298

53.46

127.50 7.94 45.15 49.40 13.37

55.74 A 1720.76 16.65 1737.41 252.25 1989.66

embedded in cement_x000D_

Amount

486.85

24.60

8.40

43.04 A

DSR-12

Page 1494 of 2298

48.00 53.46 26.73 7.94 10.92 18.06 19.76 5.42 753.18 7.10 760.28 107.59 867.87

ash fastener of required dia and size (to be

Amount

486.85

24.60 48.00 53.46 26.73 7.94 10.92 18.06 19.76 5.42 701.74 7.02 708.76 106.31 815.07

DSR-12

Page 1495 of 2298

d steel primer, - Hot finished welded type

Amount

6000.00 9.73

58.02 A

535.50

451.50 195.00 1358.50 120.29 8728.54 86.71 8815.25 1313.58 10128.83

Amount

DSR-12

Page 1496 of 2298

7250.00 9.73

58.02 A

535.50 451.50 195.00 1358.50 120.29 9978.54 99.21 10077.75 1502.96 11580.71

lded tubes. Amount

DSR-12

Page 1497 of 2298

8125.00 9.73

58.02 A

535.50 451.50 195.00 1358.50 120.29 10853.54 107.96 10961.50 1635.52 12597.02

Amount

68.00 10.92 9.88 2.71 91.51 0.92 92.43 13.86 106.29

a MS bar

DSR-12

Page 1498 of 2298

Amount

50.00

32.80 8.19 7.41 2.71 101.11 1.01 102.12 15.32 117.44

Amount

102.60 22.50 8.19 6.78 140.07 1.40 141.47 21.22 162.69

Amount

540.00 0.78 103.74 93.86 6.78 745.16 7.45 752.61 112.89

DSR-12

Page 1499 of 2298

865.50

Amount

480.00 0.78 249.83 215.80 16.08 962.49 9.62 972.11 145.82 1117.93

Amount 1.50 0.39 1.89 0.02 1.91 0.29 2.20

Amount

13434.25

DSR-12

Page 1500 of 2298

4963.50

5383.30

1492.00 36.11 7.72 3480.00 556.85 308.75 156.00

1000.57 A 165.23 30984.28 299.84 31284.12 4542.53 35826.65

tings, frames, guard bar, ladder, railings,

Amount

609.00 344.40 1.78 90.00 210.70 123.50

DSR-12

Page 1501 of 2298

65.00 13.47 A 6.78 1464.63 14.51 1479.14 219.85 1698.99

Amount

982.08

1.60 16.99 A 108.00

72.24 222.30 31.20 18.60 1453.01 14.36 1467.37 217.56 1684.93

Amount

1208.35

1.45

DSR-12

Page 1502 of 2298

16.99 A 108.00

72.24 222.30 31.20 18.60 1679.13 16.62 1695.75 251.81 1947.56

Amount

1145.34

1.64

16.99 A 108.00

72.24 222.30 31.20 18.60 1616.31 15.99 1632.30 242.30 1874.60

er sunk head.. .. - 10 x 60 mm

Amount

DSR-12

Page 1503 of 2298

250.00 109.20 98.80 14.90 472.90 4.73 477.63 71.64 549.27

er sunk head.. .. - 10 x 80 mm

Amount 293.00 109.20 98.80 14.90 515.90 5.16 521.06 78.16 599.22

er sunk head.. .. - 10 x 120mm

Amount 364.00 136.50 123.50 14.90 638.90 6.39 645.29 96.79 742.08

er sunk head.. .. - 10 x 140 mm

DSR-12

Page 1504 of 2298

Amount 425.00 136.50 123.50 14.90 699.90 7.00 706.90 106.04 812.94

er sunk head.. .. - 10 x 160 mm

Amount 560.00 163.80 148.20 14.90 886.90 8.87 895.77 134.37 1030.14

ates etc., Amount

682.50 120.00

18.06 49.40 5.20 44.70 29.80 11.18 960.84 9.61

DSR-12

Page 1505 of 2298

970.45 145.57 1116.02

. Flat 15x3 mm and nuts & bolts complete -

Amount

388.70 2.71

77.28 2.71 46.41 46.41 14.82 29.44 608.48 6.08 614.56 92.18 706.74

. Flat 15x3 mm and nuts & bolts complete des

Amount

1284.40 2.71

DSR-12

Page 1506 of 2298

77.28 2.71 46.41 46.41 14.82 29.44 1504.18 15.04 1519.22 227.88 1747.10

story windows, all complete with - 4.0 mm

Amount

341.00 2.71 35.49 187.11 566.31 5.66 571.97 85.80 657.77

story windows, all complete with - 5.5 mm

Amount

DSR-12

Page 1507 of 2298

495.00 2.71 35.49 187.11 720.31 7.20 727.51 109.13 836.64

d Amount 1638.50 131.98 1512.67 100.00 1.56 294.84 61.75 400.14 70.20 4211.64 42.12 4253.76 638.06 4891.82

d Amount 1638.50 131.98 1226.18 100.00 1.56 294.84 61.75 400.14 70.20

DSR-12

Page 1508 of 2298

3925.15 39.25 3964.40 594.66 4559.06

Amount 1870.50 150.67 96.00 13.14 45.17

245.70 489.06 13.00 2923.24 29.23 2952.47 442.87 3395.34

Amount 280.35 93.45 31.19 199.36 15.59 850.00 13.24 218.40 345.80 270.40 9.03 24.00 60.24 2411.05 24.11 2435.16 365.27 2800.43

DSR-12

Page 1509 of 2298

t concrete 1:2:4 and top layer 12 mm thick

Amount 280.35 93.45 31.19 199.36 15.59 126.50 10.07 1055.00 100.00 17.99 90.28 4.07 586.95 395.20 464.36 70.20 80.19 3620.75 36.21 3656.96 548.54 4205.50

C 1:2:4 and top layer 12_x000D_mm thick

Amount 350.70 116.55 38.98 248.64 19.45 126.50 10.07 1215.00 100.00 20.48 90.28 4.07 586.95 459.42

DSR-12

Page 1510 of 2298

464.36 70.20 80.19 4001.84 40.02 4041.86 606.28 4648.14

eat cement. 18 mm thick.

Amount

974.20 100.00 1.56 513.24 464.36 140.40 29.44 2223.20 22.23 2245.43 336.81 2582.24

Amount 4514.03 A

95.55 44.46 13.00 29.44 4696.48 1.82 4698.30 27.64 4725.94

DSR-12

Page 1511 of 2298

Amount 98.28 88.92 20.14 207.34 2.07 209.41 31.41 240.82

thick etc. complete : Dark shade pigment

Amount

238.35 79.80 26.54 169.12 13.23 545.00 100.00 10.05 156.96 4.47 202.50 3.15 7.00 156.20 5.42 488.67 491.53 270.40 260.00 9.03 24.00 480.00 240.58 3982.00 39.82 4021.82 603.27 4625.09

DSR-12

Page 1512 of 2298

thick etc. complete : Light shade pigment

Amount 4625.10 A

198.80 -156.66

486.00 -202.50 4950.74 3.26 4954.00 49.34 5003.34

mm thick etc. complete : Medium shade

Amount 4625.10 A

170.40 -156.20

243.60 -101.50 4781.40 1.56 4782.96 23.68 4806.64

hick etc. complete : White cement without

Amount

DSR-12

Page 1513 of 2298

238.35 79.80 26.54 169.12 13.23 545.00 100.00 10.05 172.44 4.91 486.00 3.15 7.00 488.67 491.53 270.40 260.00 9.03 24.00 480.00 240.58 4119.80 41.20 4161.00 624.15 4785.15

r 34mm thick CC 1:2:4 and top layer 6mm

Amount 4625.10 A

198.80 -156.20 4667.70 0.43 4668.13 6.45 4674.58

DSR-12

Page 1514 of 2298

r 34mm thick CC 1:2:4 and top layer 6mm

Amount 4625.10 A -156.20 -11.00 4457.90 -1.67 4456.23 -25.33 4430.90

r 3 mm thick CC 1:2:4 and top layer 9mm

Amount

220.50 73.50 24.53 156.80 12.26 502.50 100.00 9.38 252.00 7.18 289.00 4.50 12.00 222.75 8.14 488.67 491.53 270.40 260.00 9.03 24.00 480.00 200.48 4119.15 41.19 4160.34 624.05 4784.39

DSR-12

Page 1515 of 2298

r 3 mm thick CC 1:2:4 and top layer 9mm

Amount 4784.40 A

283.50 -222.75

693.60 -289.00 5249.75 4.65 5254.40 70.50 5324.90

r 3 mm thick CC 1:2:4 and top layer 9mm ry cement.

Amount 4784.40 A

243.00 -222.75

346.80 -144.50 5006.95 2.23 5009.18 33.72 5042.90

r 3 mm thick CC 1:2:4 and top layer 9mm

DSR-12

Page 1516 of 2298

Amount

220.50 73.50 24.53 156.80 12.26 502.50 100.00 9.38 252.00 7.18 693.60 4.50 12.00 488.67 491.53 270.40 260.00 9.03 24.00 480.00 240.58 4332.96 43.33 4376.29 656.44 5032.73

r 3 mm thick CC 1:2:4 and top layer 9mm

Amount 4784.40 A

283.50 -222.75 4845.15 0.61 4845.76 9.20 4854.96

DSR-12

Page 1517 of 2298

r 3 mm thick CC 1:2:4 and top layer 9mm

Amount

220.50 73.50 24.53 156.80 12.26 502.50 100.00 9.38 252.00 7.18 289.00 4.50 12.00 488.67 491.53 270.40 260.00 9.03 24.00 480.00 200.48 3888.26 38.88 3927.14 589.07 4516.21

in cement marble powder 3:1 Dark shade

Amount

199.50 63.00 21.90 140.00 10.95 448.50 100.00 8.54 312.12 8.94 405.00 6.31

DSR-12

Page 1518 of 2298

17.00 311.85 9.30 488.67 491.53 270.40 260.00 9.03 24.00 480.00 232.63 4319.17 43.19 4362.36 654.35 5016.71

in cement marble powder 3:1 Light shade

Amount 5016.70 A

396.90 -311.85

972.00 -405.00 5668.75 6.52 5675.27 98.79 5774.06

id in cement marble powder 3:1 Medium

Amount 5016.70 A

340.20 -311.85

DSR-12

Page 1519 of 2298

486.00 -202.50 5328.55 3.12 5331.67 47.25 5378.92

laid in cement marble powder 3:1 White

Amount

199.50 63.00 21.90 140.00 10.95 448.50 100.00 8.54 344.88 9.88 972.00 6.31 17.00 488.67 491.53 270.40 260.00 9.03 24.00 480.00 200.48 4566.57 45.67 4612.24 691.84 5304.08

in cement marble powder 3:1 Light shade

Amount

DSR-12

Page 1520 of 2298

5016.70 A

396.90 -311.85 5101.75 0.85 5102.60 12.88 5115.48

id in cement marble powder 3:1 Ordinary

Amount

199.50 63.00 21.90 140.00 10.95 448.50 100.00 8.54 344.88 9.88 405.00 6.31 17.00 488.67 491.53 270.40 260.00 9.03 24.00 480.00 200.48 3999.57 40.00 4039.57 605.94 4645.51

n cement plaster 1:3 (1 cement : 3 coarse

DSR-12

Page 1521 of 2298

Amount

721.32

156.96 4.47 202.50 3.15 7.00 156.20 5.42 819.00 741.00 260.00 1820.00 300.82 5197.84 51.98 5249.82 787.47 6037.29

n cement plaster 1:3 (1 cement : 3 coarse

Amount 6037.30 A

198.80 -156.20

486.00 -202.50 6363.40 3.26 6366.66 49.40 6416.06

n cement plaster 1:3 (1 cement : 3 coarse

DSR-12

Page 1522 of 2298

Amount 6037.30 A

170.40 -156.20

243.60 -101.50 6193.60 1.56 6195.16 23.68 6218.84

(1 cement : 3 coarse sand) : White cement

Amount

721.32 172.44 4.91 486.00 3.15 7.00 819.00 741.00 260.00 1820.00 300.82 5335.64 53.36 5389.00 808.35 6197.35

3 (1 cement : 3 coarse sand) : Light shade

Amount 6037.30 A

DSR-12

Page 1523 of 2298

198.80 -156.20 6079.90 0.43 6080.33 6.45 6086.78

k in cement plaster 1:3 Ordinary cement

Amount 6037.30 A

-156.20 -11.00 5870.10 -1.67 5868.43 -25.33 5843.10

and 4 mm thick. Amount

99.00 4.07 68.25 61.75 20.14 253.21 2.53 255.74 38.36 294.10

DSR-12

Page 1524 of 2298

Amount 81.90 74.10 74.10 230.10 2.30 232.40 34.86 267.26

nt marble powder mixture, and under layer

Amount 1181.49 A

200.00 3.11 123.50

312.00 486.00 7.00 198.80 156.96 4.47 3.15 5.42 18.69 361.20 247.00 247.00 1300.00 200.48 140.40 1200.00 6396.67 52.15 6448.82 790.10 7238.92

DSR-12

Page 1525 of 2298

white cement . Amount

2640.00 60.24 780.73

220.00 528.00 6.85 215.60 436.80 494.00 260.00 260.00 480.00 241.35 6623.57 66.24 6689.81 1003.47 7693.28

cement mortar 1:4 Medium shade using

Amount 2420.00 60.24 780.73

330.00 264.00 6.85 184.80 436.80 494.00 260.00

DSR-12

Page 1526 of 2298

260.00 480.00 241.35 6218.77 62.19 6280.96 942.14 7223.10

nt mortar 1:4 Dark shade using ordinary

Amount 2200.00 60.24 780.73

440.00 6.85 169.40 436.80 494.00 260.00 260.00 480.00 241.35 5829.37 58.29 5887.66 883.15 6770.81

nt mortar 1:4 Ordinary cement without any

Amount 2200.00 60.24 780.73

440.00 6.85

DSR-12

Page 1527 of 2298

169.40 436.80 494.00 260.00 260.00 480.00 241.35 -325.60 5503.77 55.04 5558.81 833.82 6392.63

Amount 60.06 54.34 169.00 283.40 2.83 286.23 42.93 329.16

height on 12 mm thick cement plaster 1:3

Amount 2640.00 60.24 596.96 792.00 5.14 323.40 887.25 802.75 1976.00 240.58 8324.32 83.24 8407.56 1261.13 9668.69

DSR-12

Page 1528 of 2298

height on 12 mm thick cement plaster 1:3

Amount

2420.00 60.24 596.96 396.00 165.00 5.14 277.20 887.25 802.75 1976.00

240.58 7827.12 78.27 7905.39 1185.81 9091.20

height on 12 mm thick cement plaster 1:3

Amount 2200.00 60.24 596.96 330.00 5.14 254.10 887.25 802.75 1976.00 240.58 7353.02 73.53 7426.55

DSR-12

Page 1529 of 2298

1113.98 8540.53

height on 12 mm thick cement plaster 1:3

Amount 2200.00 60.24 596.96 330.00 254.10 5.14 887.25 802.75 1976.00 240.58 -410.30 6942.72 69.43 7012.15 1051.82 8063.97

hite cement . Amount 3300.00 60.24 780.73 220.00 528.00 6.85 215.60 436.80 494.00 260.00 260.00 480.00 241.35 7283.57 72.84 7356.41 1103.46 8459.87

DSR-12

Page 1530 of 2298

g 50% white and 50 % ordinary cement .

Amount 2860.00 60.24 780.73

330.00 264.00 6.85 184.80 436.80 494.00 260.00 260.00 480.00 241.35 6658.77 66.59 6725.36 1008.80 7734.16

dinary cement . Amount 2475.00 60.24 780.73

440.00 6.85 169.40 436.80 494.00 260.00 260.00 480.00 241.35

DSR-12

Page 1531 of 2298

6104.37 61.04 6165.41 924.81 7090.22

thout shade Amount 2475.00 60.24 780.73

440.00 6.85 169.40 436.80 494.00 260.00 260.00 480.00 242.26 -325.60 5779.68 57.80 5837.48 875.62 6713.10

CM 1:4 Light shade using white cement.

Amount 5170.00 60.24 766.79 220.00 576.00 7.16 215.60 436.80 494.00 260.00

DSR-12

Page 1532 of 2298

8206.59 82.07 8288.66 1243.30 9531.96

f CM 1:4 Medium shade using 50 % white

Amount 3960.00 60.24 766.79

340.00 288.00 7.16 184.80 436.80 494.00 260.00 6797.79 67.98 6865.77 1029.87 7895.64

ed of CM 1:4 Dark shade using ordinary

Amount 2530.00 60.24 766.79

460.00 7.16 169.40 436.80 494.00 260.00 5184.39 51.84

DSR-12

Page 1533 of 2298

5236.23 785.43 6021.66

d of CM 1:4 Ordinary cement without any

Amount 2530.00 60.24 766.79

460.00 7.16 169.40 436.80 494.00 260.00 -325.60 4858.79 48.59 4907.38 736.11 5643.49

d alkali resistant tiles

Amount

624.00 9.30 41.82 60.24 16.50

63.99 -39.50 60.20 49.40 40.10

DSR-12

Page 1534 of 2298

926.05 9.26 935.31 140.30 1075.61

alkali resistant tiles

Amount

624.00 9.30 48.80

69.66 -43.00 60.24 26.73 75.25 61.75 40.10 972.83 9.73 982.56 147.38 1129.94

slurry Marble tiles (polished) Rajnagar : 8

Amount 360.74 5.81

58.04 37.77 16.50 3.10

DSR-12

Page 1535 of 2298

75.25 61.75 25.18 644.14 6.44 650.58 97.59 748.17

akrana White Second quality.

Amount

21275.00 780.73

250.00 40.10

361.20 247.00 247.00 1300.00 1200.00 200.48 25901.51 259.02 26160.53 3924.08 30084.61

Nagar Plain. Amount

6267.50 780.73

DSR-12

Page 1536 of 2298

250.00 40.10

361.20 247.00 247.00 1300.00 1200.00 200.48 10894.01 108.94 11002.95 1650.44 12653.39

aria white. Amount

12535.00 780.73

250.00 40.10

361.20 247.00 247.00 1300.00 1200.00 200.48 17161.51 171.62 17333.13 2599.97 19933.10

ck Zebra.

DSR-12

Page 1537 of 2298

Amount

5405.00 780.73

250.00 40.10

361.20 247.00 247.00 1300.00 1200.00 200.48 10031.51 100.32 10131.83 1519.77 11651.60

aipur green marble. Amount

7590.00 780.73

250.00 40.10

361.20 247.00 247.00 1300.00 1200.00 200.48 12216.51 122.17 12338.68 1850.80 14189.48

DSR-12

Page 1538 of 2298

k Plain Marble. Amount

7015.00 780.73

250.00 40.10

361.20 247.00 247.00 1300.00 1200.00 200.48 11641.51 116.42 11757.93 1763.69 13521.62

Amount 602.00 370.50 650.00 80.19 1702.69 17.03 1719.72 257.96 1977.68

Amount

DSR-12

Page 1539 of 2298

586.95 345.80 185.25 826.80 40.10 1984.90 19.85 2004.75 300.71 2305.46

ement : 4 coarse sand) : 25 mm thick.

Amount

3105.00 52.17 780.73 320.00 4.98 247.50 1200.00 327.60 247.00 247.00 1300.00 310.11 8142.09 81.42 8223.51 1233.53 9457.04

Amount

3105.00 52.17 596.96

DSR-12

Page 1540 of 2298

320.00 4.98 247.50 819.00 741.00 247.00 1820.00 260.72 8214.33 82.14 8296.47 1244.47 9540.94

e. Amount

1705.00 50.75 782.49

933.10 286.00 135.85 70.20 16.08 3979.47 39.79 4019.26 602.89 4622.15

one. Amount

DSR-12

Page 1541 of 2298

1870.00 50.75 782.49

933.10 286.00 135.85 70.20 16.08 4144.47 41.44 4185.91 627.89 4813.80

ointing with CM 1:2 Red sand stone.

Amount

1705.00 50.75 782.49

107.61

1173.90 286.00 345.80 143.00 40.10 4634.65 46.35 4681.00 702.15 5383.15

ointing with CM 1:2 White sand stone.

DSR-12

Page 1542 of 2298

Amount

1870.00 50.75 782.49

107.61 1173.90 286.00 345.80 143.00 40.10 4799.65 48.00 4847.65 727.15 5574.80

h joints 3mm thick, side buttered with CM

Amount

1705.00 50.75 782.49

107.61

1173.90 286.00 345.80 143.00 40.10 160.68 296.40 5091.73 50.92 5142.65 771.40 5914.05

DSR-12

Page 1543 of 2298

h joints 3mm thick, side buttered with CM

Amount

1870.00 50.75 782.49

107.61

1173.90 286.00 345.80 143.00 40.10 160.68 296.40 5256.73 52.57 5309.30 796.40 6105.70

Amount 451.50 451.50 4.52 456.02 68.40 524.42

DSR-12

Page 1544 of 2298

Amount 54.60 49.40 104.00 1.04 105.04 15.76 120.80

Amount

21463.20 3428.15 29.84 140.00 806.68 333.45 49.59 26250.91 262.51 26513.42 3977.01 30490.43

Amount

14308.80 2176.13 29.84 140.00

DSR-12

Page 1545 of 2298

650.16 266.76 40.10 17611.79 176.12 17787.91 2668.19 20456.10

Amount

162.80 0.39

2926.00 4.18 526.75 555.75 370.50 30.10 120.29 4696.76 46.97 4743.73 711.56 5455.29

Amount

510.00

DSR-12

Page 1546 of 2298

10.50 0.95 9.00 13.56 24.57 135.45 61.75 12.43 A 778.21 7.66 785.87 116.02 901.89

reen, black in skirting, risers of steps and

Amount

302.38 9.30 58.04 60.24 16.50 75.25 61.75 40.10 623.56 6.24 629.80 94.47 724.27

y, Grey, Fume Red Brown, laid on 20 mm

Amount

DSR-12

Page 1547 of 2298

369.00 9.30 83.65 30.10 16.50 60.20 49.40 40.10 658.25 6.58 664.83 99.72 764.55

ry, Grey, Fume Red brown laid on 20 mm

Amount

376.18 9.30 83.65 30.10 16.50 60.20 49.40 40.10 665.43 6.65 672.08 100.81 772.89

hite, Ivory, Grey, Fume Red Brown, laid on

Amount

522.75 9.30 83.65 20.07

DSR-12

Page 1548 of 2298

16.50 60.20 49.40 40.10 801.97 8.02 809.99 121.50 931.49

cept White, Ivory, Grey, Fume Red Brown,

Amount

548.38 9.30 83.65 20.07 16.50 60.20 49.40 40.10 827.60 8.28 835.88 125.38 961.26

the joints with white cement - Size of Tile

Amount

753.38 9.30 83.65 5.42 16.50 60.20 49.40 40.10 1017.95

DSR-12

Page 1549 of 2298

10.18 1028.13 154.22 1182.35

cement complete. Size of Tile 60x60 cm

Amount

886.63 9.30 83.65 5.42 16.50 60.20 49.40 40.10 1151.20 11.51 1162.71 174.41 1337.12

4 etc., complete. Size of Tile 80x80 cm

Amount

1096.75 9.30 83.65 3.87 16.50 60.20 49.40 40.10 1359.77 13.60 1373.37 206.01 1579.38

DSR-12

Page 1550 of 2298

on 20mm thick CM 1:4 etc., complete. Size

Amount

1670.75 9.30 83.65 3.87 16.50 60.20 49.40 40.10 1933.77 19.34 1953.11 292.97 2246.08

aying of floor tiles. Amount 83.65 60.24 16.50 60.20 49.40 40.10 310.09 3.10 313.19 46.98 360.17

k-set tile adhesive (Water based) . ... ..

Amount 80.00

DSR-12

Page 1551 of 2298

60.24 60.20 49.40 40.10 289.94 2.90 292.84 43.93 336.77

4 coarse sand), with joints not exceeding 5 ester fibre..

Amount

487.96 182.91 185.25 239.20 13.37 200.00 3.11 123.50

156.00 92.98

104.56 73.14 A 48.76 B

361.20 247.00 247.00 140.40 100.20 3006.54 28.85 3035.39 437.02 3472.41

DSR-12

Page 1552 of 2298

Amount 1575.00

172.90 128.44 93.60 1123.95 A 10806.50 150.50 247.00 74.50 14372.39 132.48 14504.87 2007.14 16512.01

2 mm thick bed of cement mortar 1:3 - Size

Amount 753.38 9.30 58.04 5.42 16.50 75.25 61.75 40.10 1019.74 10.20 1029.94 154.49 1184.43

DSR-12

Page 1553 of 2298

2 mm thick bed of cement mortar 1:3 - Size

Amount 886.63 9.30 58.04 5.42 16.50 75.25 61.75 40.10 1152.99 11.53 1164.52 174.68 1339.20

2 mm thick bed of cement mortar 1:3 - Size

Amount 1096.75 9.30 58.04 5.42 16.50 75.25 61.75 40.10 1363.11 13.63 1376.74 206.51 1583.25

2 mm thick bed of cement mortar 1:3 - Size

DSR-12

Page 1554 of 2298

Amount 1670.75 9.30 58.04 5.42 16.50 75.25 61.75 40.10 1937.11 19.37 1956.48 293.47 2249.95

modified quick set tile adhesive (water

Amount 753.38 9.30 160.00 75.25 123.50 40.10 1161.53 11.62 1173.15 175.97 1349.12

iser of steps, laid with cement based high

Amount 886.63 9.30

DSR-12

Page 1555 of 2298

160.00 75.25 123.50 40.10 1294.78 12.95 1307.73 196.16 1503.89

iser of steps, laid with cement based high

Amount 1096.75 9.30 160.00 75.25 123.50 40.10 1504.90 15.05 1519.95 227.99 1747.94

iser of steps, laid with cement based high

Amount 1670.75 9.30 160.00 75.25 123.50 40.10 2078.90 20.79 2099.69 314.95 2414.64

DSR-12

Page 1556 of 2298

f 0.70 kg of organic coated filler of desired

Amount 105.00 30.10 24.70 7.45 167.25 1.67 168.92 25.34 194.26

f 0.70 kg of organic coated filler of desired

Amount 90.00 24.08 19.76 7.45 141.29 1.41 142.70 21.41 164.11

f 0.70 kg of organic coated filler of desired

Amount 75.00 18.06 14.82 7.45 115.33 1.15

DSR-12

Page 1557 of 2298

116.48 17.47 133.95

f 0.70 kg of organic coated filler of desired

Amount 55.00 12.04 9.88 7.45 84.37 0.84 85.21 12.78 97.99

polymer modified_x000D_

Amount 753.38 9.30 160.00 60.20 98.80 40.10 1121.78 11.22 1133.00 169.95 1302.95

h polymer modified quick set tile adhesive

Amount

DSR-12

Page 1558 of 2298

886.63 9.30 160.00 60.20 98.80 40.10 1255.03 12.55 1267.58 190.14 1457.72

h polymer modified quick set tile adhesive

Amount 1096.75 9.30 160.00 60.20 98.80 40.10 1465.15 14.65 1479.80 221.97 1701.77

h polymer modified quick set tile adhesive

Amount 1670.75 9.30 160.00 60.20 98.80 40.10 2039.15

DSR-12

Page 1559 of 2298

20.39 2059.54 308.93 2368.47

of fixing of vitrified tiles.

Amount 4.65 1.49 6.14 0.06 6.20 0.93 7.13

00mm thick with zinc coating not less than

Amount

118044.50 181.13

1768.00

7290.00 592.90 423.50 40.10 80.19

DSR-12

Page 1560 of 2298

391.30 4231.50 3828.50 172.04 0.77 308.49 279.11 75.35 412.50 10.07 690.69 624.91 47.65 56.75 139549.95 1395.50 140945.45 21141.82 162087.27

nc coating not less than 275gm/m²

Amount

96526.50 148.11

DSR-12

Page 1561 of 2298

1768.00

7290.00 592.90 423.50 40.10 80.19 391.30 4231.50 3828.50 172.04 0.77 308.49 279.11 75.35 412.50 10.07 690.69 624.91 47.65 56.75 117998.93 1179.99 119178.92 17876.84 137055.76

not less than 275gm/ m²

Amount

DSR-12

Page 1562 of 2298

78205.75 119.92

1768.00

7290.00 592.90 423.50 40.10 80.19 391.30 4231.50 3828.50 172.04 0.77 308.49 279.11 75.35 412.50 10.07 690.69 624.91 47.65 56.75 99649.99 996.50 100646.49 15096.97 115743.46

DSR-12

Page 1563 of 2298

1.00 mm thick. Amount

45.15 37.05 82.20 0.82 83.02 12.45 95.47

0.80 mm thick. Amount

36.12 29.64 65.76 0.66 66.42 9.96 76.38

0.63 mm thick. Amount

36.12 29.64 65.76 0.66 66.42 9.96 76.38

DSR-12

Page 1564 of 2298

Amount

942.13 1546.22 2488.35 24.88 2513.23 376.98 2890.21

Amount

752.50 1235.00 1987.50 19.88 2007.38 301.11 2308.49

Amount

752.50 1235.00 1987.50 19.88 2007.38 301.11 2308.49

DSR-12

Page 1565 of 2298

Amount

2755.00 4.52

98.00 8.96 7.00 2.71 20.14 120.40 361.20 218.40 592.80 4189.13 41.89 4231.02 634.65 4865.67

Amount

2232.50 3.66

98.00 8.96 7.00 2.71 20.14 120.40 361.20

DSR-12

Page 1566 of 2298

218.40 592.80 3665.77 36.66 3702.43 555.36 4257.79

Amount

5804.50 9.34

42.00 3.84 3.00 1.36 20.14 120.40 361.20 218.40 592.80 7176.98 71.77 7248.75 1087.31 8336.06

Amount

2000.23 3.19

21.00

DSR-12

Page 1567 of 2298

2.10 1.50 0.58 16.08 150.50 445.48 273.00 741.00 3654.66 36.55 3691.21 553.68 4244.89

Amount

1502.90 2.46 314.58 40.00 300.00 21.00 10.00 4.07 7.94 150.50 123.50 18.79 84.28 252.84 169.26 414.96 3417.08 34.17 3451.25 517.69 3968.94

DSR-12

Page 1568 of 2298

Amount

1122.90 1.84 314.58 40.00 300.00 21.00 10.00 4.07 7.94 150.50 123.50 18.79 84.28 252.84 169.26 414.96 3036.46 30.36 3066.82 460.02 3526.84

Amount

59482.50

DSR-12

Page 1569 of 2298

247.94 4284.00 119.00 152.32 12.01 58.88 704.34 2549.82 2306.98 69917.79 699.18 70616.97 10592.55 81209.52

- corrugated 6mm thick sheet for chimney,

Amount

36.12 29.64 65.76 0.66 66.42 9.96 76.38

orrugated 6mm thick sheet

Amount

301.00 247.00 548.00 5.48 553.48 83.02 636.50

DSR-12

Page 1570 of 2298

Amount

2513.70 4.67 30.80 150.50 123.50 2823.17 28.23 2851.40 427.71 3279.11

d roofing accessories Corrugated serrated

Amount

4867.80 20.14 10.07 42.14 150.15 405.08 5495.38 54.95 5550.33 832.55 6382.88

DSR-12

Page 1571 of 2298

roofing accessories Plain wing adjustable

Amount

4867.80 20.14 10.07 42.14 150.15 405.08 5495.38 54.95 5550.33 832.55 6382.88

roofing accessories Close fitting adjustable

Amount

5636.40 24.02 10.65 42.14 150.15 405.08 6268.44 62.68 6331.12 949.67 7280.79

DSR-12

Page 1572 of 2298

roofing accessories Unserrated adjustable

Amount

6814.92 10.07 9.88 42.14 150.15 405.08 7432.24 74.32 7506.56 1125.98 8632.54

Corrugated Apron pieces.

Amount

4704.00 4.84 4.84 21.07 76.44 202.54 5013.73 50.14 5063.87 759.58 5823.45

DSR-12

Page 1573 of 2298

Eave's filler pieces.

Amount

3150.00 4.84 4.84 21.07 76.44 202.54 3459.73 34.60 3494.33 524.15 4018.48

North light curves. Amount

6614.16 360.00 12.80 10.00 14.72 9.30 30.10 81.90 247.00 7379.98 73.80 7453.78 1118.07 8571.85

DSR-12

Page 1574 of 2298

Ventilator curves. Amount

8321.04 360.00 12.80 10.00 14.72 9.30 30.10 81.90 247.00 9086.86 90.87 9177.73 1376.66 10554.39

Barge boards. Amount

4147.50 17.50 3.20 1.25 13.95 10.07 12.04 16.38 98.80 4320.69 43.21 4363.90 654.59 5018.49

DSR-12

Page 1575 of 2298

Ridge finials. Amount

147.00 16.08 163.08 1.63 164.71 24.71 189.42

Special North light curves.

Amount

10794.00 360.00 12.80 10.00 14.72 9.30 30.10 81.90 247.00 11559.82 115.60 11675.42 1751.31 13426.73

S type louvers. Amount

DSR-12

Page 1576 of 2298

1312.50 16.08 120.00 90.00 4.50 10.80 4.07 19.95 301.00 247.00 36.12 2162.02 21.62 2183.64 327.55 2511.19

ers with purlins Amount

488.46 95.00 5.70 1.55 114.38 93.86 798.95 7.99 806.94 121.04 927.98

men of grade VG - 10 Amount 629.00 36.60 14.00 1.49 67.20

DSR-12

Page 1577 of 2298

5.26 93.86 40.95 20.14 908.50 9.09 917.59 137.64 1055.23

h tile bricks of class 10 with CM 1:3 Non-

Amount

62.85 79.19

37.50 7.94 12.01 4.07 1178.00 53.26 221.55 0.15 10.07 354.90 926.25 286.00 3233.74 32.34 3266.08 489.91 3755.99

machine moulded tile bricks of class 12.5

DSR-12

Page 1578 of 2298

Amount

62.85 79.19

37.50 7.94 12.01 4.07 1406.00 53.26 221.55 0.15 10.07 354.90 926.25 286.00 3461.74 34.62 3496.36 524.45 4020.81

Amount

6.50 17.29 10.40 40.10 74.29 0.74 75.03 11.25 86.28

DSR-12

Page 1579 of 2298

FPS brick tiles Amount 1178.00 53.26 650.12 0.13

221.13 266.76 70.20 2.71 2442.31 24.42 2466.73 370.01 2836.74

Amount 1944.00 22.43 128.96

0.25 780.73 180.60 642.20 19.37 3718.54 37.19 3755.73 563.36 4319.09

Amount

87.78 7.32 46.82

DSR-12

Page 1580 of 2298

3.66 150.00 2.34 21.00 13.83 6.50 1.51 1.37 0.96 3.68 1.94 45.15 40.95 7.55 75.25 68.25 247.00 12.01 32.69 23.25 24.95 8.58 2.52 2.13 938.99 9.39 948.38 142.26 1090.64

Amount 7.04 2.31 0.78 4.93 0.39 16.00 0.25 2.22 1.48 0.70 0.15 0.14 0.10 0.39 0.19 31.00 17.00 6.74 5.80 2.03

DSR-12

Page 1581 of 2298

0.58 3.00 0.05 2.30 1.98 0.39 20.14 128.08 1.28 129.36 19.40 148.76

R.C.C. battens : Red sand stone slab : 40 to

Amount 1815.00 98.89 33.11 27.24

436.24 473.20 375.44 78.00 24.02 3361.14 33.61 3394.75 509.21 3903.96

R.C.C. battens : White sand stone slab : 40

Amount 2035.00 98.89 33.11 436.24 473.20 375.44 78.00 24.02

DSR-12

Page 1582 of 2298

27.24 3581.14 35.81 3616.95 542.54 4159.49

mm thick Amount 2970.00 26.15 40.10 752.50 494.00 46.29 46.29 4375.33 43.75 4419.08 662.86 5081.94

m thick Amount 3960.00 26.15 40.10 752.50 494.00 46.29 46.29 5365.33 53.65 5418.98 812.85 6231.83

DSR-12

Page 1583 of 2298

oard 12mm thick Amount 3465.00 26.15 40.10 752.50 494.00 46.29 46.29 4870.33 48.70 4919.03 737.85 5656.88

Amount 3575.00 22.28 40.10 752.50 494.00 46.29 46.29 4976.46 49.76 5026.22 753.93 5780.15

Amount 2002.00 22.28 40.10 752.50 494.00

DSR-12

Page 1584 of 2298

46.29 46.29 3403.46 34.03 3437.49 515.62 3953.11

k Amount

3096.00 4.30 15.50 797.65 39.59 689.13 11.62 21.89 4675.68 46.76 4722.44 708.37 5430.81

thick Amount

580.50 5.04 7.94 147.49 96.33 9.10 9.10 752.50 617.50 16.08

DSR-12

Page 1585 of 2298

2241.58 22.42 2264.00 339.60 2603.60

k Amount

774.00 5.04 7.94 147.49 96.33 9.10 9.10 752.50 617.50 16.08 2435.08 24.35 2459.43 368.91 2828.34

2 mm thick Amount

677.25 5.04 7.94 147.49 96.33 9.10 9.10 752.50 617.50 16.08

DSR-12

Page 1586 of 2298

2338.33 23.38 2361.71 354.26 2715.97

m thick Amount

236.50 4.07 7.94 147.49 96.33 9.10 9.10 752.50 617.50 16.08 1896.61 18.97 1915.58 287.34 2202.92

mm thick Amount

279.50 4.26 7.94 147.49 96.33 9.10 9.10 752.50 617.50 16.08

DSR-12

Page 1587 of 2298

1939.80 19.40 1959.20 293.88 2253.08

Amount 301.00 273.00 494.00 1068.00 10.68 1078.68 161.80 1240.48

excluding frame work : Flat surfaces

Amount

1425.60 4.76 39.00

459.00

879.04 17.09 4.07 481.60

DSR-12

Page 1588 of 2298

395.20

972.23 797.81 140.40 125.13 80.19 5821.12 58.21 5879.33 881.90 6761.23

Amount

1425.60 4.76 39.00

459.00

879.04 17.09 4.07 481.60 395.20 972.23 797.81 140.40 125.13 80.19 150.50 301.00 370.50 6643.12

DSR-12

Page 1589 of 2298

66.43 6709.55 1006.43 7715.98

Amount 439.52 8.54 602.00 494.00 65.00 20.14 1629.20 16.29 1645.49 246.82 1892.31

oor level Amount 20.14 301.00 247.00 65.00 633.14 6.33 639.47 95.92 735.39

m thick Amount

2244.00

DSR-12

Page 1590 of 2298

154.96 522.99 301.00 494.00 3716.95 37.17 3754.12 563.12 4317.24

Amount

1595.00 77.48

150.50 123.50 1946.48 19.46 1965.94 294.89 2260.83

th Type N-Normal 50 mm thick.

Amount

1430.00 6.50 19.37 150.50 123.50 1729.87 17.30 1747.17 262.08 2009.25

DSR-12

Page 1591 of 2298

ith type SE- self Extinguishing type 50 mm

Amount

1705.00 6.50 19.37 150.50 123.50 2004.87 20.05 2024.92 303.74 2328.66

Amount

330.00 20.14 20.14 109.20 98.80 7.94 586.22 5.86 592.08 88.81 680.89

Amount 85.00 10.65

DSR-12

Page 1592 of 2298

3.68 37.63 204.75 123.50 3.47 1.16 0.39 2.46 0.19 8.00 0.12 1.11 0.79 0.36 0.09 0.08 0.05 0.39 0.19 484.06 4.84 488.90 73.34 562.24

Amount 125.00 10.65 3.68 37.63 204.75 123.50 3.47 1.16 0.39 2.46 0.19 8.00 0.12 1.11 0.79 0.36 0.09 0.08 0.05

DSR-12

Page 1593 of 2298

0.39 0.19 524.06 5.24 529.30 79.40 608.70

Amount 88.20 4.40 20.14 2.13 18.06 16.38 29.64 178.95 1.79 180.74 27.11 207.85

Amount 133.20 6.80 20.14 4.07 24.08 21.84 37.05 247.18 2.47 249.65 37.45 287.10

DSR-12

Page 1594 of 2298

Amount 325.00 26.15 351.15 3.51 354.66 53.20 407.86

Amount 402.00 16.00 20.14 10.07 57.19 91.39 20.80 27.70 645.29 6.45 651.74 97.76 749.50

Amount 774.00 20.00 26.15 12.01 69.23 111.15 28.60 27.70 1068.84 10.69 1079.53

DSR-12

Page 1595 of 2298

161.93 1241.46

with seal ring : Coupler : 75 mm.

Amount 34.00 32.00 4.07 13.95 84.02 0.84 84.86 12.73 97.59

with seal ring : Coupler : 110 mm.

Amount 52.00 40.00 4.07 16.08 112.15 1.12 113.27 16.99 130.26

g with seal ring : Single pushfit coupler : 75

Amount 50.00 32.00 4.07 13.95 100.02 1.00

DSR-12

Page 1596 of 2298

101.02 15.15 116.17

ng with seal ring : Single pushfit coupler :

Amount 81.00 40.00 4.07 16.08 141.15 1.41 142.56 21.38 163.94

g with seal ring : Single tee with door: 75 x

Amount 115.00 48.00 16.03 179.03 1.79 180.82 27.12 207.94

with seal ring : Single tee with door: 110 x

Amount 180.00 60.00 20.07

DSR-12

Page 1597 of 2298

260.07 2.60 262.67 39.40 302.07

g with seal ring : Single tee without door :

Amount 95.00 48.00 16.03 159.03 1.59 160.62 24.09 184.71

g with seal ring : Single tee without door :

Amount 128.00 60.00 20.07 208.07 2.08 210.15 31.52 241.67

g with seal ring : Bend 87.5 degree: 75 mm

Amount 56.00 16.00 4.07

DSR-12

Page 1598 of 2298

13.95 90.02 0.90 90.92 13.64 104.56

with seal ring : Bend 87.5 degree: 110 mm

Amount 95.00 20.00 4.07 16.08 135.15 1.35 136.50 20.48 156.98

with seal ring : Shoe plain : 75 mm dia.

Amount 107.00 16.00 4.07 13.95 141.02 1.41 142.43 21.36 163.79

Amount 207.00 20.00 4.07 16.08

DSR-12

Page 1599 of 2298

247.15 2.47 249.62 37.44 287.06

g in C.M 1 : 4 coarse sand : For 75 mm dia.

Amount 80.00 3.68 80.00 37.63 204.75 123.50 10.65 1.36 5.81 547.38 5.47 552.85 82.93 635.78

Amount 155.00 3.68 80.00 37.63 204.75 123.50 10.65 1.36 5.81 622.38 6.22 628.60 94.29 722.89

DSR-12

Page 1600 of 2298

Amount

22.00 6.20 28.20 0.28 28.48 4.27 32.75

pressed from M.S. sheet and galvanised in d conforming to IS: 2095, Part-I.

Amount

17417.60 9287.46 1129.68 3810.24 205.20 1171.80 432.00 288.00 560.00 501.82 821.04 177.80 1586.10 3456.00 1202.88 666.33 8491.39 7682.69 2830.46 61718.49 617.18 62335.67 9350.35 71686.02

DSR-12

Page 1601 of 2298

k made of special sections, power pressed

Amount

25799.82 9287.46 1129.68 3810.24 205.20 1171.80 432.00 288.00 560.00 501.82 821.04 177.80 1586.10 3456.00 1202.88 666.33 8491.39 7682.69 2831.01 70101.26 701.01 70802.27 10620.34 81422.61

k made of special sections, power pressed

Amount

29501.06

DSR-12

Page 1602 of 2298

9287.46 1129.68 3810.24 205.20 1171.80 432.00 288.00 560.00 501.82 821.04 177.80 1586.10 3456.00 1202.88 666.33 8491.39 7682.69 2830.46 73801.95 738.02 74539.97 11181.00 85720.97

om M.S. sheets - Fully Perforated Gypsum

Amount

100913.22 9287.46 1129.68 3810.24 205.20 1171.80 432.00 288.00 560.00 501.82

DSR-12

Page 1603 of 2298

821.04 177.80 1586.10 3456.00 1202.88 666.33 8491.39 7682.69 2830.46 145214.11 1452.14 146666.25 21999.94 168666.19

ht of 8 mm and weighing not less than 100

Amount

77.00 6.20 83.20 0.83 84.03 12.60 96.63

or L hooks, bolts & nuts 8 mm dia.: 2 mm

Amount

129339.50 154.96

1768.00

DSR-12

Page 1604 of 2298

7290.00 592.90 423.50 40.10 80.19 391.30 4231.50 3828.50 148140.45 1481.40 149621.85 22443.28 172065.13

or L hooks, bolts & nuts 8 mm dia.: 2 mm

Amount

111789.72 154.96

1768.00

7290.00 592.90 423.50 40.10 80.19 391.30 4231.50 3828.50 130590.67 1305.91 131896.58 19784.49 151681.07

DSR-12

Page 1605 of 2298

e. Amount 1632.00 22.43 90.30 385.32 19.37 2149.42 21.49 2170.91 325.64 2496.55

eel frame. Amount 348.00 1.68 3.01 37.05 3.87 393.61 3.94 397.55 59.63 457.18

Amount

101637.75 154.96 4284.00 119.00 152.32 12.01 58.88

DSR-12

Page 1606 of 2298

704.34 2549.82 2306.98 111980.06 1119.80 113099.86 16964.98 130064.84

Amount

10168.40 20.14 10.07 42.14 150.15 405.08 10795.98 107.96 10903.94 1635.59 12539.53

. Amount

10168.40 4.84 4.84 21.07 76.44 202.54 10478.13 104.78 10582.91

DSR-12

Page 1607 of 2298

1587.44 12170.35

plete : North light curves.

Amount 10515.05 360.00 12.80 10.00 14.72 9.30 30.10 81.90 247.00 11280.87 112.81 11393.68 1709.05 13102.73

Amount

3844.80 17.50 3.20 1.25 13.95 10.07 12.04 16.38 98.80 4017.99 40.18 4058.17 608.73 4666.90

DSR-12

Page 1608 of 2298

Amount

10679.43 360.00 12.80 10.00 14.72 9.30 30.10 81.90 247.00 11445.25 114.45 11559.70 1733.96 13293.66

Amount

4550.00 1.55 314.58 40.00 300.00 21.00 10.00 4.07 7.94 150.50 123.50 18.79 84.28 252.84 169.26 414.96 6463.27 64.63 6527.90 979.19

DSR-12

Page 1609 of 2298

7507.09

ions.. GI Metal Ceiling Lay in plain Tegular

Amount

80940.45 5516.50 1593.00 10584.00 4998.00 504.00 432.00 216.00 3456.00 280.05 133.03 8428.00 5681.00 122762.03 1227.62 123989.65 18598.45 142588.10

ions.. GI Metal Ceiling Lay in plain Tegular

Amount

90645.30 5516.50 1593.00

DSR-12

Page 1610 of 2298

10584.00 4998.00 504.00 432.00 216.00 3456.00 280.05 133.03 8428.00 5681.00 132466.88 1324.67 133791.55 20068.73 153860.28

ections.. 12.5 mm thick square edge PVC

Amount

49140.00

5516.50 1593.00 10584.00 4998.00 504.00 432.00 216.00 3456.00 280.05 133.03 8428.00 5681.00 90961.58 909.62 91871.20 13780.68 105651.88

DSR-12

Page 1611 of 2298

sections.. 12.5 mm thick fully Perforated

Amount

50820.00

5516.50 1593.00 10584.00 4998.00 504.00 432.00 216.00 3456.00 280.05 133.03 8428.00 5681.00 92641.58 926.42 93568.00 14035.20 107603.20

m silicate false ceiling tiles ..

Amount

90090.00 5664.00

DSR-12

Page 1612 of 2298

1687.50 11319.00 5733.00 504.00 432.00 3456.00 216.00 55.00 742.99 353.85 462.94 8428.00 5681.00 134825.28 1348.25 136173.53 20426.03 156599.56

e 20x30x20 mm made of 0.5 mm thick pre 00x600mm..

Amount

93870.00 10800.00 4293.50 5412.00 220.00 484.00 968.00 2997.00 560.00 480.00 240.00 3840.00 280.12 134.10 8428.00 5681.00 138687.72

DSR-12

Page 1613 of 2298

1386.88 140074.60 21011.19 161085.79

e 20x30x20 mm made of 0.5 mm thick pre - 0.5 mm thick with 25 mm height..

Amount

104790.00 10800.00 4293.50 5412.00 220.00 484.00 968.00 2997.00 560.00 480.00 240.00 3840.00 280.12 134.10 8428.00 5681.00 149607.72 1496.08 151103.80 22665.57 173769.37

dex) > 78, solar reflection > 0.70 and initial

Amount

DSR-12

Page 1614 of 2298

4964.60 780.73 220.00 528.00 6.85 215.60

436.80 494.00 260.00 260.00 480.00 253.27 8899.85 89.00 8988.85 1348.33 10337.18

ane foam over deck insulation conforming

Amount 40.75

461.34 26.25 10.00 29.99 15.00 66.56 20.49 32.01 25.00 120.00 80.00 927.39 9.27 936.66 140.50 1077.16

DSR-12

Page 1615 of 2298

IS: 8183 .. Amount

2244.00 77.48

150.50 123.50 29.80 2625.28 26.25 2651.53 397.73 3049.26

Amount 427.94 192.29 185.25 239.20 18.79 1063.47 10.63 1074.10 161.12 1235.22

Amount 332.88 192.29 185.25 239.20 18.79 968.41

DSR-12

Page 1616 of 2298

9.68 978.09 146.71 1124.80

: 4 fine sand) Amount 511.15

229.60 217.36 257.40 18.79 1234.30 12.34 1246.64 187.00 1433.64

: 6 fine sand) Amount 397.61

229.60 217.36 257.40 18.79 1120.76 11.21 1131.97 169.80 1301.77

Amount 665.69

DSR-12

Page 1617 of 2298

269.78 251.94 286.00 18.79 1492.20 14.92 1507.12 226.07 1733.19

Amount 517.82

269.78 251.94 286.00 18.79 1344.33 13.44 1357.77 203.67 1561.44

Amount 501.90 192.29 185.25 239.20 18.79 1137.43 11.37 1148.80 172.32 1321.12

DSR-12

Page 1618 of 2298

Amount 406.84

192.29 185.25 239.20 18.79 1042.37 10.42 1052.79 157.92 1210.71

oarse sand) Amount 599.49

229.60 217.36 257.40 18.79 1322.64 13.23 1335.87 200.38 1536.25

oarse sand) Amount 485.95

229.60 217.36 257.40 18.79 1209.10 12.09 1221.19 183.18 1404.37

DSR-12

Page 1619 of 2298

Amount 780.73

269.78 251.94 286.00 18.79 1607.24 16.07 1623.31 243.50 1866.81

Amount 632.86

269.78 251.94 286.00 18.79 1459.37 14.59 1473.96 221.09 1695.05

: 3 fine sand) Amount 523.00

192.29 185.25 239.20 18.79

DSR-12

Page 1620 of 2298

100.00 1.56 77.49 66.69 12.01 1416.28 14.16 1430.44 214.57 1645.01

: 4 fine sand) Amount 427.94

192.29 185.25 239.20 18.79 100.00 1.56 77.49 66.69 12.01 1321.22 13.21 1334.43 200.16 1534.59

oat of neat cement of mix : 1:3 (1 cement:

Amount 624.69

229.60 217.36 257.40 18.79 100.00 1.56 77.49 66.69 12.01

DSR-12

Page 1621 of 2298

1605.59 16.06 1621.65 243.25 1864.90

oat of neat cement of mix : 1:4 (1 cement:

Amount 511.15

229.60 217.36 257.40 18.79 100.00 1.56 77.49 66.69 12.01 1492.05 14.92 1506.97 226.05 1733.02

. 12 mm cement plaster

Amount 596.96 192.29 185.25 239.20 18.79 100.00 1.56 77.49 66.69 12.01 1490.24 14.90 1505.14 225.77 1730.91

DSR-12

Page 1622 of 2298

. 20 mm cement plaster

Amount 928.60 269.78 251.94 286.00 18.79 100.00 1.56 77.49 66.69 12.01 2012.86 20.13 2032.99 304.95 2337.94

cement on the rough side of single or half

Amount 713.03

229.60 217.36 257.40 18.79 100.00 1.56 77.49 66.69 12.01 1693.93 16.94 1710.87 256.63 1967.50

DSR-12

Page 1623 of 2298

layer 6mm thick CP 1:6 (1 cement: 6 fine

Amount 450.71

166.44

347.27 318.63 273.00 18.79 1574.84 15.75 1590.59 238.59 1829.18

a top layer 6mm thick CP 1:3 (1 cement: 3

Amount 450.71 298.48

347.27 318.63 273.00 18.79 1706.88 17.07 1723.95 258.59 1982.54

Amount 673.72

192.29

DSR-12

Page 1624 of 2298

185.25 239.20 18.79 1309.25 13.09 1322.34 198.35 1520.69

Amount 804.72

229.60 217.36 257.40 18.79 1527.87 15.28 1543.15 231.47 1774.62

Amount 1048.01

269.78 251.94 286.00 18.79 1874.52 18.75 1893.27 283.99 2177.26

DSR-12

Page 1625 of 2298

Amount 261.50 146.37 185.25 239.20 19.95 17.43 869.70 8.70 878.40 131.76 1010.16

ck coat of Lime wash on top of walls when

Amount 261.50 146.37 185.25 239.20 19.95 17.43 100.00 1.56 77.49 66.69 12.01 2.30 3.10 0.77 18.20 17.29 4.07 1173.18 11.73 1184.91 177.74 1362.65

Amount 110.00

DSR-12

Page 1626 of 2298

1.71 77.49 66.69 12.01 267.90 2.68 270.58 40.59 311.17

ushed stone in two layers, 2mm CP 1:4 -

Amount 501.90

192.29 185.25 239.20 14.72 435.83 175.07 170.43 221.00 14.72 91.50 2.60 19.80 5.42 143.50 123.50 26.00 14.72 75.25 61.75 2714.45 27.14 2741.59 411.24 3152.83

ushed stone 6mm to 12.5mm size in two

Amount

DSR-12

Page 1627 of 2298

501.90 192.29 185.25 239.20 14.72 435.83 175.07 170.43 221.00 14.72 91.50 2.60 19.80 5.42 143.50 123.50 26.00 14.72 6.59 2584.04 25.84 2609.88 391.48 3001.36

on recommended by the manufacturers.

Amount

37.00 10.65 47.65 0.48 48.13 7.22 55.35

dditional height of 3 m or part thereof.

Amount 80.19

DSR-12

Page 1628 of 2298

57.40 74.10 26.00 10.65 248.34 2.48 250.82 37.62 288.44

Amount 57.40 49.40 10.65 117.45 1.17 118.62 17.79 136.41

Amount 86.10 74.10 19.95 180.15 1.80 181.95 27.29 209.24

Amount 861.00 494.00 247.00

DSR-12

Page 1629 of 2298

65.00 19.95 1686.95 16.87 1703.82 255.57 1959.39

Amount 1435.00 741.00 494.00 85.80 19.95 2775.75 27.76 2803.51 420.53 3224.04

Amount 215.25 182.78 40.10 438.13 4.38 442.51 66.38 508.89

Amount 229.60 197.60 50.75 477.95

DSR-12

Page 1630 of 2298

4.78 482.73 72.41 555.14

Amount 143.50 123.50 19.95 286.95 2.87 289.82 43.47 333.29

Amount

92.00 5.81 273.91 224.77 125.13 721.62 7.22 728.84 109.33 838.17

Amount 143.50 123.50 2.71

DSR-12

Page 1631 of 2298

269.71 2.70 272.41 40.86 313.27

ush Band Amount 41.61

77.49 66.69 13.00 2.13 200.92 2.01 202.93 30.44 233.37

unk Band Amount 41.61

86.10 74.10 13.00 3.10 217.91 2.18 220.09 33.01 253.10

aised Band Amount 41.61

DSR-12

Page 1632 of 2298

100.45 86.45 13.00 4.07 245.58 2.46 248.04 37.21 285.25

oulded Band Amount 41.61

186.55 160.55 13.00 2.32 404.03 4.04 408.07 61.21 469.28

sh Band Amount 59.44

91.84 79.04 15.60 3.10 249.02 2.49 251.51 37.73 289.24

DSR-12

Page 1633 of 2298

k Band Amount 59.44

103.32 88.92 15.60 4.07 271.35 2.71 274.06 41.11 315.17

sed Band Amount 59.44

120.54 103.74 15.60 6.59 305.91 3.06 308.97 46.35 355.32

ulded Band Amount 71.32

246.82 212.42 13.00 4.07 547.63 5.48 553.11 82.97

DSR-12

Page 1634 of 2298

636.08

Amount

43.82 29.72

246.82 212.42 13.00 4.07 549.85 5.50 555.35 83.30 638.65

nd) : Flush / Ruled/ Struck or weathered

Amount 108.96

143.50 148.20 241.80 10.65 21.31 674.42 6.74 681.16 102.17 783.33

Raised and cut pointing

Amount

DSR-12

Page 1635 of 2298

167.07

307.09 323.57 260.00 10.65 24.02 1092.40 10.92 1103.32 165.50 1268.82

Struck or weathered pointing

Amount 167.07 10.65 192.29 197.60 332.80 24.02 924.43 9.24 933.67 140.05 1073.72

nting Amount 83.53 10.65 264.04 338.39 241.80 24.02 962.43 9.62 972.05 145.81

DSR-12

Page 1636 of 2298

1117.86

ointing Amount 138.01 10.65 574.00 731.12 260.00 24.02 1737.80 17.38 1755.18 263.28 2018.46

rble dust) Amount 288.31

10.65 574.00 731.12 260.00 24.02 1888.10 18.88 1906.98 286.05 2193.03

d pointing Amount 66.12

DSR-12

Page 1637 of 2298

134.89 170.43 153.40 24.02 548.86 5.49 554.35 83.15 637.50

for every additional height of 3 m or part

Amount 19.95 19.95 39.90 0.40 40.30 6.05 46.35

Amount 12.30 1.36 52.00 24.70 6.59 4.07 101.02 1.01 102.03 15.30 117.33

Amount

DSR-12

Page 1638 of 2298

2.30 3.10 0.77 20.80 9.88 4.07 40.92 0.41 41.33 6.20 47.53

e coats) with a base coat of white washing

Amount 12.30 12.01 1.36 78.00 24.70 6.59 4.07 139.03 1.39 140.42 21.06 161.48

e coats) with a base coat of white washing

Amount 12.30 12.01 1.36 78.00 24.70 4.07 4.07 136.51 1.37 137.88 20.68

DSR-12

Page 1639 of 2298

158.56

g priming coat of whiting to give an even

Amount 4.00 4.07 52.50 2.32 10.65 218.40 98.80 8.02 398.76 3.99 402.75 60.41 463.16

ith cement primer. Amount 56.00 10.65 12.01 63.00 6.59 17.43 273.00 123.50 12.01 574.19 5.74 579.93 86.99 666.92

k.

DSR-12

Page 1640 of 2298

Amount 63.00 6.59 17.24 109.20 113.62 12.01 321.66 3.22 324.88 48.73 373.61

Amount 56.00 10.65 109.20 49.40 12.01 237.26 2.37 239.63 35.94 275.57

Amount 153.60 2.32 125.58 56.81 26.00 10.65 12.01 386.97 3.87 390.84 58.63 449.47

DSR-12

Page 1641 of 2298

base coat of WP cement paint applied @

Amount 649.44 88.00 2.32 163.80 74.10 13.00 10.46 12.01 1013.13 10.13 1023.26 153.49 1176.75

Amount 217.10 88.00 2.32 163.80 74.10 13.00 10.65 12.01 580.98 5.81 586.79 88.02 674.81

uired shade New work (Two or more coats

Amount

DSR-12

Page 1642 of 2298

328.90 88.00 2.32 163.80 74.10 13.00 10.65 12.01 692.78 6.93 699.71 104.96 804.67

Amount 340.00 62.25 1.86 163.80 74.10 13.00 10.46 12.01 677.48 6.77 684.25 102.64 786.89

Amount 244.80 62.25 2.32 163.80 74.10 13.00 10.46 12.01 582.74

DSR-12

Page 1643 of 2298

5.83 588.57 88.29 676.86

Amount 244.80 85.60 2.32 163.80 74.10 13.00 10.46 12.01 606.09 6.06 612.15 91.82 703.97

Amount 63.75 4.07 0.58 68.25 61.75 7.94 16.08 222.42 2.22 224.64 33.70 258.34

od Amount

DSR-12

Page 1644 of 2298

54.00 4.07 0.58 68.25 61.75 7.94 16.08 212.67 2.13 214.80 32.22 247.02

sed iron/steel works

Amount 36.72 0.77 65.52 59.28 16.08 178.37 1.78 180.15 27.02 207.17

second coat) Amount 24.48 0.58 A 32.76 29.64 10.65 98.11 0.98 99.09 14.86 113.95

DSR-12

Page 1645 of 2298

and manufacture on wet or patchy portion

Amount 252.00 0.77 4.07 73.71 66.69 7.94 16.08 421.26 4.21 425.47 63.82 489.29

and manufacture on wet or patchy portion

Amount 403.20 0.77 4.07 117.39 106.21 12.71 25.72 670.07 6.70 676.77 101.52 778.29

Amount

51.00 4.07

DSR-12

Page 1646 of 2298

0.58 68.25 61.75 8.14 15.88

393.75 2.13 147.42 133.38 10.07 12.01 908.43 9.08 917.51 137.63 1055.14

ork Amount

67.20 20.14 0.77 68.25 61.75 4.07 12.01

381.15 10.07 2.13 147.42 133.38 16.08 10.07 934.49 9.34 943.83 141.57 1085.40

DSR-12

Page 1647 of 2298

uding a coat of approved steel primer but

Amount

24.48 0.58 32.76 29.64 10.65

108.00 2.13 147.42 133.38 10.07 12.01 511.12 5.11 516.23 77.43 593.66

cetate in a litre of soft water

Amount 10.26 2.71 1.36 163.80 148.20 53.46 53.46 433.25 4.33 437.58 65.64 503.22

hydrochloric acid in a solution of 13 gms t water

DSR-12

Page 1648 of 2298

Amount 0.42 3.54 2.60 2.71 1.36 0.20 163.80 148.20 53.46 53.46 429.75 4.30 434.05 65.11 499.16

lack anticorrosive bitumastic paint on new

Amount 36.72 0.77 65.52 59.28 16.08 80.75 2.13 147.42 133.38 7.94 12.01 7.94 91.04 660.98 6.61 667.59 100.14 767.73

lack anticorrosive bitumastic paint on new

DSR-12

Page 1649 of 2298

Amount 54.40 98.28 88.92 23.83 1.36 A 119.85 3.10 218.40 197.60 12.01 16.48 10.65 140.24 985.12 9.85 994.97 149.25 1144.22

ynthetic enamel paint new work. 100 mm

Amount

36.72 0.77 65.52 59.28 16.08 150.80 2.13 7.94 147.42 133.38 10.07 17.82 98.98 746.91 7.47 754.38 113.16 867.54

DSR-12

Page 1650 of 2298

ynthetic enamel paint new work. 150 mm

Amount

54.40 0.97 98.28 88.92 23.83 223.60 3.10 11.82 218.40 197.60 14.91 26.54 151.09 1113.46 11.13 1124.59 168.69 1293.28

Amount

70.00 0.77 40.95 37.05 6.20 5.81 160.78 1.61 162.39 24.36 186.75

DSR-12

Page 1651 of 2298

Amount 1995.00 2.13 147.42 133.38 10.07 12.01 2300.01 23.00 2323.01 348.45 2671.46

Amount 2.13 70.00 2.13 15.00 106.21 7.94 7.94 211.35 2.11 213.46 32.02 245.48

Amount 199.65 10.07 2.13 147.42 133.38 16.08 10.07 518.80 5.19 523.99 78.60

DSR-12

Page 1652 of 2298

602.59

Amount 150.80 7.94 2.13 147.42 133.38 10.07 12.01 463.75 4.64 468.39 70.26 538.65

Amount 63.75 4.07 0.58 68.25 61.75 7.94 16.08 150.80 2.13 147.42 133.38 10.07 12.01 678.23 6.78 685.01 102.75 787.76

DSR-12

Page 1653 of 2298

Amount 92.00 2.13 7.94 147.42 133.38 10.07 17.82 410.76 4.11 414.87 62.23 477.10

Amount 121.80 2.13 7.94 147.42 133.38 10.07 12.01 434.75 4.35 439.10 65.87 504.97

Amount 80.75 2.13 147.42 133.38 7.94 12.01 383.63 3.84 387.47 58.12

DSR-12

Page 1654 of 2298

445.59

Amount 177.60 2.13 7.94 147.42 133.38 10.07 12.01 490.55 4.91 495.46 74.32 569.78

Amount 45.50 4.55 145.00 2.13 7.94 245.70 222.30 10.07 10.65 693.84 6.94 700.78 105.12 805.90

Amount 45.50

DSR-12

Page 1655 of 2298

4.55 157.50 2.13 4.07 245.70 222.30 10.07 10.65 702.47 7.02 709.49 106.42 815.91

Amount 105.95 10.65 49.20 4.07 24.02 19.95 2.13 955.50 12.01 1183.48 11.83 1195.31 179.30 1374.61

Amount 87.50 0.58 218.40 197.60 6.20 10.65 520.93 5.21 526.14 78.92

DSR-12

Page 1656 of 2298

605.06

Amount 17.50 109.20 98.80 7.94 12.01 245.45 2.45 247.90 37.19 285.09

Amount

50.40 1.36 1638.00 494.00 19.95 12.01 2215.72 22.16 2237.88 335.68 2573.56

, under layer 12mm CP 1:4

Amount 501.90

192.29 185.25 239.20

DSR-12

Page 1657 of 2298

13.37 100.00 1.56 61.75

147.00 12.26 44.80 3.50 500.00 7.79 24.70 13.00 6.39 3.10 526.75 432.25 78.00 36.42 301.00 123.50 37.58 3593.36 35.93 3629.29 544.39 4173.68

Amount

37.00 0.58 40.95 37.05 4.26

210.70 172.90

DSR-12

Page 1658 of 2298

106.92 610.36 6.10 616.46 92.47 708.93

Amount

49.50 0.77 40.95 37.05 4.26

210.70 172.90 106.92 623.05 6.23 629.28 94.39 723.67

Amount 320.77 90.30 74.10 39.00 42.61 566.78 5.67 572.45 85.87 658.32

DSR-12

Page 1659 of 2298

Amount 150.50 123.50 80.19 354.19 3.54 357.73 53.66 411.39

ng providing aluminium channels

Amount

1531.20 58.08 125.58 37.05 4.26 106.92 1863.09 18.63 1881.72 282.26 2163.98

Amount 1200.00 -500.00 700.00 7.00 707.00 106.05

DSR-12

Page 1660 of 2298

813.05

r. Amount 1186.29

344.40 296.40 18.79 1845.88 18.46 1864.34 279.65 2143.99

Amount 45.63 45.63 0.46 46.09 6.91 53.00

roved brand and manufacturer, over the

Amount 342.63

5.81 135.45 111.15

DSR-12

Page 1661 of 2298

59.60 654.64 6.55 661.19 99.18 760.37

ound ) content less than 50 grams/ litre, - One coat

Amount 23.56 0.77 16.08 90.09 41.99 10.65 183.14 1.83 184.97 27.75 212.72

ound ) content less than 50 grams/ litre, - Two coats

Amount 37.62 17.24 6.59 109.20 113.62 12.01 296.28 2.96 299.24 44.89 344.13

DSR-12

Page 1662 of 2298

ent less than 50 grams/ litre -One coat

Amount 106.00 0.77 7.94 98.28 88.92 12.01 10.07 323.99 3.24 327.23 49.08 376.31

ent less than 50 grams/ litre -Two coats

Amount 168.00 10.07 2.13 147.42 133.38 16.08 10.07 487.15 4.87 492.02 73.80 565.82

Organic Compound ) content less than 50

Amount 133.00 0.77

DSR-12

Page 1663 of 2298

7.94 98.28 88.92 12.01 10.07 350.99 3.51 354.50 53.18 407.68

Organic Compound ) content less than 50

Amount 210.00 10.07 2.13 147.42 133.38 16.08 10.07 529.15 5.29 534.44 80.17 614.61

ss than 150 grams/ litre - One coat

Amount 95.40 0.77 98.28 88.92 4.07 7.94 12.01 307.39 3.07 310.46 46.57

DSR-12

Page 1664 of 2298

357.03

ss than 150 grams/ litre - Two coats

Amount 151.20 2.13 7.94 147.42 133.38 10.07 12.01 464.15 4.64 468.79 70.32 539.11

nt. - With ready mixed pink or grey primer

Amount 77.25 4.07 0.58 68.25 61.75 7.94 16.08 235.92 2.36 238.28 35.74 274.02

DSR-12

Page 1665 of 2298

ontent. -With ready mixed red oxide zinc

Amount 67.50 0.77 65.52 59.28 16.08 209.15 2.09 211.24 31.69 242.93

t. -With water thinnable cement primer on

Amount 38.50 12.01 109.20 49.40 10.65 219.76 2.20 221.96 33.29 255.25

ne sand) Amount 543.84 347.27 318.63 133.38 239.20 22.66 1604.98

DSR-12

Page 1666 of 2298

16.05 1621.03 243.15 1864.18

cement mortar 1 : 4 (1 cement : 4 coarse

Amount 637.83

347.27 318.63 133.38 239.20 22.66 1698.97 16.99 1715.96 257.39 1973.35

Amount 22.05 7.56 2.47 15.79 1.24 33.00 0.51 6.67 4.82 2.53 0.54 0.49 0.31 2.13 1.16 0.58 23.12 36.03 20.14 2.71 143.50 185.25

DSR-12

Page 1667 of 2298

4.07 516.67 5.17 521.84 78.28 600.12

Amount 14.70 5.04 1.65 10.53 0.82 22.00 0.34 4.45 3.21 1.69 0.36 0.33 0.21 1.36 0.77 0.39 13.87 14.72 1.36 94.71 123.50 316.01 3.16 319.17 47.88 367.05

Amount 7.35 2.52 0.82 5.26 0.41 11.00 0.17 2.22

DSR-12

Page 1668 of 2298

1.61 0.84 0.18 0.16 0.10 0.77 0.39 0.19 6.94 12.01 1.36 48.79 123.50 4.07 230.66 2.31 232.97 34.95 267.92

Amount 6.67 4.82 2.53 0.31 2.71 78.00 18.21 113.25 1.13 114.38 17.16 131.54

w/ clerestory window.

Amount

23.12 36.61 136.50

DSR-12

Page 1669 of 2298

296.40 98.80 5.22 596.65 5.97 602.62 90.39 693.01

ness 4 mm Amount

341.00 2.71 20.40 7.94 10.07 62.79 56.81 2.13 503.85 5.04 508.89 76.33 585.22

Amount 495.00 2.71 20.40 7.94 10.07 62.79 56.81 2.13 657.85 6.58 664.43 99.66 764.09

DSR-12

Page 1670 of 2298

._x000D_ Amount 341.00

16.00 12.00 7.50 6.59 4.07 54.60 68.25 111.15 2.71 623.87 6.24 630.11 94.52 724.63

Amount 495.00

16.00 12.00 7.50 6.59 4.07 54.60 68.25 111.15 2.71 777.87 7.78 785.65 117.85 903.50

DSR-12

Page 1671 of 2298

Amount

341.00 4.07 14.72 7.94 81.90 74.10 2.13 525.86 5.26 531.12 79.67 610.79

Amount

495.00 4.07 14.72 7.94 81.90 74.10 2.13 679.86 6.80 686.66 103.00 789.66

Amount

82.80 40.10

DSR-12

Page 1672 of 2298

68.25 61.75 4.07 256.97 2.57 259.54 38.93 298.47

Amount

35.65 40.10 68.25 61.75 4.07 209.82 2.10 211.92 31.79 243.71

Amount

20.40 10.65 4.07 81.90 74.10 2.13 193.25 1.93 195.18 29.28 224.46

DSR-12

Page 1673 of 2298

Amount 20.40 4.07 10.65 81.90 74.10 2.13 193.25 1.93 195.18 29.28 224.46

Amount

81.90 74.10 2.13 5.81 163.94 1.64 165.58 24.84 190.42

000D_ Amount

25.20 20.14

10.65

9.03

DSR-12

Page 1674 of 2298

32.76 61.75 4.07 163.60 1.64 165.24 24.79 190.03

Amount

154.98 133.38

77.49

72.27 31.50 36.13 61.75

221.55

344.40 370.50 260.00 7.94 4.07 1775.96 17.76 1793.72 269.06 2062.78

o 50 mm thick.

DSR-12

Page 1675 of 2298

Amount

218.60 92.63 6.00 60.24 1815.00 109.80 36.60

27.24 485.03 527.80 417.43 88.40 24.02 43.80 3952.59 39.53 3992.12 598.82 4590.94

h oil type wood preserva- tive : Sal wood

Amount

15300.00 30.63

136.50 494.00 7.94 120.29 85.40 49.96 45.20 1.16 7.55 7.17 16285.80 162.86 16448.66 2467.30 18915.96

DSR-12

Page 1676 of 2298

il type wood preservative : Not exceeding

Amount

156.25 2.28 68.25 61.75

37.31 130.00 81.51

15300.00 30.63 273.00 130.00 247.00

31.85 19.11 17.29 0.19 2.71 2.71 30.80 40.10 92.50 16755.24 167.55 16922.79 2538.42 19461.21

DSR-12

Page 1677 of 2298

il type wood preservative : Not exceeding

Amount

96.88 2.28 68.25 61.75

37.31 130.00 81.51

9486.00 30.63 273.00 130.00 247.00

31.85 19.11 17.29 0.19 2.71 2.71 30.80 40.10 92.50 10881.87 108.82 10990.69 1648.60 12639.29

ype wood preservative : Above 4.00 m and

Amount

DSR-12

Page 1678 of 2298

187.50 4.99 68.25 61.75

71.75 163.80 123.50

19150.00 38.34 273.00 260.00 494.00

39.55 21.84 19.76 0.39 3.49 3.29 30.80 49.39 138.75 21204.14 212.04 21416.18 3212.43 24628.61

ype wood preservative : Above 4.00 m and

Amount

DSR-12

Page 1679 of 2298

116.25 3.75 68.25 61.75

71.75 163.80 123.50

11873.00 38.34 273.00 260.00 494.00

39.55 21.84 19.76 0.39 3.49 3.29 30.80 49.39 138.75 13854.65 138.55 13993.20 2098.98 16092.18

Amount

130.91 19.76 18.20 2.13 171.00 1.71 172.71 25.91 198.62

DSR-12

Page 1680 of 2298

pointing on tile work._x000D_

Amount

54.48 3.83 88.92 98.28 93.60 28.09 367.20 3.67 370.87 55.63 426.50

odular brick tiles._x000D_

Amount

61.74 4.33 88.92 98.28 93.60 28.09 374.96 3.75 378.71 56.81 435.52

Amount

DSR-12

Page 1681 of 2298

24.57 15.60 39.52 79.69 0.80 80.49 12.07 92.56

Amount

612.00 17.00 21.76 1.74 102.34 83.98 20.73

38.54 A

82.88 B 980.97 8.60 989.57 130.22 1119.79

Amount

DSR-12

Page 1682 of 2298

552.50 1.01 139.86 A

143.47 B 23.12 36.03 2.71 10.98 C

143.50 185.25 3.87 1242.30 9.48 1251.78 143.62 1395.40

w._x000D_ Amount

2.73 2.60 4.94 0.58

600.00

147.00

DSR-12

Page 1683 of 2298

32.40 120.00

9.03 5.20 27.17

3.42 A 2.52 957.59 9.54 967.13 144.56 1111.69

00D_ Amount

10.92 7.80 14.82 1.55

600.00

420.00 86.40 180.00

DSR-12

Page 1684 of 2298

30.10 13.00 88.92

7.04 A 7.94 1468.49 14.61 1483.10 221.41 1704.51

ns or drains and the like.

Amount

187.50 494.00 681.50 6.82 688.32 103.25 791.57

Amount

54.00 155.61 81.90 9.61 301.12 3.01 304.13 45.62 349.75 (including CP &OH)

DSR-12

Page 1685 of 2298

Amount 1432.60 75.28 115.40 4.07 108.36 98.28 338.39 52.00 2224.38 22.24 2246.62 336.99 2583.61

uperior class teak wood

Amount

4200.00 4.00 306.90 140.00 36.00

DSR-12

Page 1686 of 2298

722.40 49.14 190.19 60.24 5708.87 57.09 5765.96 864.89 6630.85

t class teak wood_x000D_

Amount

3200.00 4.00 306.90 140.00 36.00 722.40 49.14 190.19 60.24 4708.87 47.09 4755.96 713.39 5469.35

DSR-12

Page 1687 of 2298

x000D_ Amount

4515.00 393.70 140.00 36.00 9.00 2.00 4.30 525.21 62.79 190.19 60.24 5938.43 59.38 5997.81 899.67 6897.48

_ Amount

DSR-12

Page 1688 of 2298

3440.00 393.70 140.00 36.00 9.00 2.00 4.30 525.21 62.79 190.19 60.24 4863.43 48.63 4912.06 736.81 5648.87

Second class teak wood.

Amount

1296.00 1.80 2399.54 A 48.00 9.00 24.00 2.00

81.90 3862.24 14.63 3876.87 221.60 4098.47

DSR-12

Page 1689 of 2298

Amount

200.00 80.00 4.07 2.32

34.84 A 4.07 2.32 327.62 2.93 330.55 44.36 374.91

re._x000D_ Amount

240.00 80.00 4.07 2.32

34.84 A 4.07 2.32 367.62 3.33 370.95 50.42 421.37

n frames of windows &_x000D_clerestory

Amount

DSR-12

Page 1690 of 2298

1228.00

264.60 2.88 40.10 95.55 54.60 111.15 1796.88 17.97 1814.85 272.23 2087.08

Amount

15300.00 30.63 191.10 358.15 182.00 14.94 A 40.10 16116.92 161.02 16277.94 2439.45 18717.39

DSR-12

Page 1691 of 2298

Amount

9486.00 30.63 191.10 358.15 182.00 14.94 A 40.10 10302.92 102.88 10405.80 1558.63 11964.43

Amount

3000.00 160.00 5.42 120.40 49.40 3335.22 33.35 3368.57 505.29 3873.86

Amount

2500.00 160.00 5.42

DSR-12

Page 1692 of 2298

120.40 49.40 2835.22 28.35 2863.57 429.54 3293.11

Amount

1500.00 128.00 5.42 120.40 49.40 1803.22 18.03 1821.25 273.19 2094.44

Amount

5000.00 160.00 5.42 120.40 49.40 5335.22 53.35 5388.57 808.29 6196.86

DSR-12

Page 1693 of 2298

Amount

3500.00 160.00 5.42 120.40 49.40 3835.22 38.35 3873.57 581.04 4454.61

Amount

3000.00 128.00 5.42 120.40 49.40 3303.22 33.03 3336.25 500.44 3836.69

Amount

1400.00 57.00 5.42 60.20 1522.62 15.23 1537.85 230.68 1768.53

DSR-12

Page 1694 of 2298

Amount

1200.00 57.00 4.07 51.17 1312.24 13.12 1325.36 198.80 1524.16

Amount

850.00 57.00 4.07 51.17 962.24 9.62 971.86 145.78 1117.64

Amount

1600.00 64.00 4.07 21.07 9.49 1698.63 16.99 1715.62 257.34

DSR-12

Page 1695 of 2298

1972.96

Amount

700.00 1.36 18.06 719.42 7.19 726.61 108.99 835.60

Amount

675.00 1.36 18.06 694.42 6.94 701.36 105.20 806.56

Amount

625.00 1.36 18.06 644.42 6.44 650.86 97.63

DSR-12

Page 1696 of 2298

748.49

Amount

600.00 1.36 18.06 619.42 6.19 625.61 93.84 719.45

Amount

500.00 1.36 18.06 519.42 5.19 524.61 78.69 603.30

Amount

190.00 64.00 1.36 24.08 279.44 2.79 282.23

DSR-12

Page 1697 of 2298

42.33 324.56

Amount

300.00 38.00 1.36 30.10 369.46 3.69 373.15 55.97 429.12

Amount

1200.00 38.00 1.36 30.10 1269.46 12.69 1282.15 192.32 1474.47

Amount

3000.00 80.00 19.00 120.40

DSR-12

Page 1698 of 2298

49.40 3268.80 32.69 3301.49 495.22 3796.71

type). Amount

810.00 230.00 5.42 42.14 24.70 1112.26 11.12 1123.38 168.51 1291.89

type). Amount

675.00 152.00 5.42 42.14 24.70 899.26 8.99 908.25 136.24 1044.49

e).

DSR-12

Page 1699 of 2298

Amount

950.00 90.00 2.71 42.14 24.70 1109.55 11.10 1120.65 168.10 1288.75

type). Amount

425.00 90.00 2.71 42.14 24.70 584.55 5.85 590.40 88.56 678.96

type). Amount

185.00 40.00 1.36 24.08 250.44 2.50 252.94 37.94 290.88

DSR-12

Page 1700 of 2298

Amount

1450.00 9.49 68.25 1527.74 15.28 1543.02 231.45 1774.47

Amount

8.20 0.77 28.60 14.82 4.07 4.07 60.53 0.61 61.14 9.17 70.31

Amount

4.10 0.77 18.20 7.41 3.10 4.07

DSR-12

Page 1701 of 2298

37.65 0.38 38.03 5.70 43.73

Amount 22.23 9.88 10.40 4.07 2.71 49.29 0.49 49.78 7.47 57.25

Amount

35.00 1.36 7.94 90.09 41.99 6.59 182.97 1.83 184.80 27.72 212.52

Amount 42.00 0.77 16.08

DSR-12

Page 1702 of 2298

90.09 41.99 10.65 201.58 2.02 203.60 30.54 234.14

Amount 27.17 12.35 13.00 9.30 2.71 64.53 0.65 65.18 9.78 74.96

Amount

50.60 0.77 98.28 88.92 9.94 12.01 260.52 2.61 263.13 39.47 302.60

DSR-12

Page 1703 of 2298

ack anticorrosive bitumastic paint : 75 mm

Amount

27.88 0.58 49.14 44.46 12.20 62.05 1.55 111.93 101.27 6.20 9.30 6.59 60.05 493.20 4.93 498.13 74.72 572.85

ack anticorrosive bitumastic paint : 75 mm

Amount

36.55 0.58 73.71 66.69 6.20 9.30 6.59 40.10 239.72 2.40 242.12 36.32 278.44

DSR-12

Page 1704 of 2298

black anticorrosive bitumastic paint - 100

Amount

48.45 0.77 98.28 88.92 7.94 12.01 7.94 50.75 315.06 3.15 318.21 47.73 365.94

black anticorrosive bitumastic paint - 150

Amount

72.25 0.97 144.69 130.91 12.01 17.82 10.64 60.05 449.34 4.49 453.83 68.07 521.90

uminium paint : - 75mm dia pipes

Amount

DSR-12

Page 1705 of 2298

27.88 0.58 49.14 44.46 12.20 70.15 1.55 6.20 111.93 101.27 7.75 13.56 66.83 513.50 5.14 518.64 77.80 596.44

uminium paint : - 100mm dia pipes

Amount

36.72 0.77 65.52 59.28 16.08 133.40 2.13 7.94

147.42 133.38 10.07 17.82 98.98 729.51 7.30 736.81 110.52 847.33

DSR-12

Page 1706 of 2298

uminium paint : - 150mm dia pipes

Amount

54.40 0.97 98.28 88.92 23.83 197.80 3.10 11.82 218.40 197.60 14.91 26.54 151.09 1087.66 10.88 1098.54 164.78 1263.32

work : 75 mm dia. pipe .

Amount

40.25 0.58 3.10 76.44 69.16 6.20 9.30 6.59 40.10 251.72 2.52 254.24 38.14

DSR-12

Page 1707 of 2298

292.38

work : 100 mm dia. pipe.

Amount

52.90 0.77 4.07 98.28 88.92 7.94 12.01 7.94 50.75 323.58 3.24 326.82 49.02 375.84

work : 150 mm dia. pipe.

Amount

78.20 0.97 5.81 144.69 130.91 11.82 17.82 10.65 60.05 460.92 4.61 465.53 69.83 535.36

DSR-12

Page 1708 of 2298

Amount

56.70 0.77 30.03 27.17 4.07 4.07 122.81 1.23 124.04 18.61 142.65

Amount

120.45 0.00 7.94 98.28 88.92 12.01 10.07 337.67 3.38 341.05 51.16 392.21

Amount 91.00 0.77 98.28 88.92

DSR-12

Page 1709 of 2298

4.07 7.94 12.01 302.99 3.03 306.02 45.90 351.92

Amount 52.90 0.77 4.07 98.28 88.92 7.94 12.01 264.89 2.65 267.54 40.13 307.67

Amount 73.50 0.77 4.07 98.28 88.92 7.94 12.01 285.49 2.85 288.34 43.25 331.59

DSR-12

Page 1710 of 2298

Amount 48.45 0.77 98.28 88.92 7.94 12.01 256.37 2.56 258.93 38.84 297.77

Amount 63.70 26.65 1.36 16.08 0.77 480.48 12.01 601.05 6.01 607.06 91.06 698.12

Amount 43.75 0.58 109.20 98.80 6.20 6.59 265.12 2.65

DSR-12

Page 1711 of 2298

267.77 40.17 307.94

Amount

33.30 0.00 1092.00 247.00 10.65 12.01 1394.96 13.95 1408.91 211.34 1620.25

Amount 63.00 0.77 4.07 98.28 88.92 7.94 12.01 274.99 2.75 277.74 41.66 319.40

Amount

DSR-12

Page 1712 of 2298

26.00 12.01 38.01 0.38 38.39 5.76 44.15

Amount 27.00 12.01 39.01 0.39 39.40 5.91 45.31

One or more coats on old work.

Amount 42.00 0.77 16.03 60.06 54.34 10.65 183.85 1.84 185.69 27.85 213.54

ed @ 2.20Kg/10Sqm) over & i/c primer @

Amount 88.00 50.40

DSR-12

Page 1713 of 2298

2.32 125.58 56.81 13.00 10.65 12.01 358.77 3.59 362.36 54.35 416.71

re coats @ 2.20 kg/10 sqm) complete

Amount 88.00 1.64 95.55 29.64 13.00 4.69 12.01 244.53 2.45 246.98 37.05 284.03

surface applied @ 3.28 Kg/10 Sqm).

Amount 649.44 2.32 125.58 56.81 10.65 12.01 856.81 8.57 865.38 129.81 995.19

DSR-12

Page 1714 of 2298

qm). Amount 360.36 0.77 90.09 41.99 10.65 12.01 515.87 5.16 521.03 78.15 599.18

ed @ 1.67 Ltr/10Sqm) on existing cement

Amount 217.10 1.36 125.58 56.81 7.17 7.94 415.96 4.16 420.12 63.02 483.14

@ 0.90 Ltr./10 Sqm).

Amount 117.00 0.77 90.09 41.99

DSR-12

Page 1715 of 2298

10.65 12.01 272.51 2.73 275.24 41.29 316.53

oats applied @ 1.43 Ltr/10Sqm) on existing

Amount 328.90 1.55 125.58 56.81 10.65 12.01 535.50 5.36 540.86 81.13 621.99

ats) applied @ 0.83 Ltr./10 Sqm).

Amount 190.90 1.36 90.09 41.99 10.65 12.01 347.00 3.47 350.47 52.57 403.04

DSR-12

Page 1716 of 2298

Amount 87.50 0.77 4.07 98.28 88.92 7.94 4.07 291.55 2.92 294.47 44.17 338.64

Amount 93.75 0.77 4.07 98.28 88.92 4.07 6.20 296.06 2.96 299.02 44.85 343.87

Amount

162.50 195.00 6.59 95.55 86.45 6.59 552.68 5.53

DSR-12

Page 1717 of 2298

558.21 83.73 641.94

Amount 45.50 4.07 2.71 36.03 98.28 88.92 275.51 2.76 278.27 41.74 320.01

ht made with 40 mm dia. MS tube 1.50 m

Amount 7820.65

471.42 4665.50 7657.00 1542.15 22156.72 221.57 22378.29 3356.74 25735.03

DSR-12

Page 1718 of 2298

ndows/ ventilators with necessary welding

Amount 450.00 187.11 5.42 642.53 6.43 648.96 97.34 746.30

ators with necessary welding and machine

Amount 170.00 187.11 5.42 362.53 3.63 366.16 54.92 421.08

Amount 108.68 91.39 1.55 201.62 2.02 203.64 30.55 234.19

DSR-12

Page 1719 of 2298

Amount 392.73 177.84 7.17 577.74 5.78 583.52 87.53 671.05

Amount 217.36 135.85 2.91 356.12 3.56 359.68 53.95 413.63

Amount 654.55 177.84 10.46 842.85 8.43 851.28 127.69 978.97

Amount 523.64 222.30 6.97 752.91 7.53

DSR-12

Page 1720 of 2298

760.44 114.07 874.51

Amount

136.50 123.50 19.95 279.95 2.80 282.75 42.41 325.16

Amount

68.25 123.50 19.95 211.70 2.12 213.82 32.07 245.89

Amount 74.10 91.39 1.55 167.04 1.67

DSR-12

Page 1721 of 2298

168.71 25.31 194.02

Amount 306.28 113.62 1.55 421.45 4.21 425.66 63.85 489.51

Amount 108.68 91.39 1.55 201.62 2.02 203.64 30.55 234.19

Amount 261.82 222.30 3.68 487.80 4.88 492.68 73.90 566.58

DSR-12

Page 1722 of 2298

Amount 592.80 395.20 109.20 2.71 1099.91 11.00 1110.91 166.64 1277.55

- From brick work in lime mortar

Amount 691.60 345.80 218.40 13.37 1269.17 12.69 1281.86 192.28 1474.14

Amount 864.50 370.50 338.52 12.01 1585.53 15.86 1601.39 240.21 1841.60

DSR-12

Page 1723 of 2298

Amount 150.67 121.03 2.91 274.61 2.75 277.36 41.60 318.96

Amount 321.10 256.88 4.07 582.05 5.82 587.87 88.18 676.05

: In lime mortar. Amount 192.66 150.67 4.07 347.40 3.47 350.87 52.63 403.50

: In cement mortar. Amount 382.85

DSR-12

Page 1724 of 2298

293.93 4.07 680.85 6.81 687.66 103.15 790.81

Amount 13.65 49.40 49.40 0.77 113.22 1.13 114.35 17.15 131.50

Amount 13.65 98.80 49.40 1.36 163.21 1.63 164.84 24.73 189.57

Amount 27.30 44.46 13.65 2.13 87.54

DSR-12

Page 1725 of 2298

0.88 88.42 13.26 101.68

Amount 35.49 61.75 19.11 4.07

120.42 1.20 121.62 18.24 139.86

Amount

13.65 19.76 0.77 34.18 0.34 34.52 5.18 39.70

Amount 19.11 24.70 1.36 45.17 0.45 45.62

DSR-12

Page 1726 of 2298

6.84 52.46

Amount 546.00 494.00 19.95 1059.95 10.60 1070.55 160.58 1231.13

Amount

21.84 19.76 0.77 42.37 0.42 42.79 6.42 49.21

Amount

54.60 74.10 19.95 148.65 1.49 150.14 22.52 172.66

DSR-12

Page 1727 of 2298

Amount

1.64 1.98 0.58 4.20 0.04 4.24 0.64 4.88

Amount

68.25 123.50 19.95 211.70 2.12 213.82 32.07 245.89

Amount

2.73 4.94 0.58 8.25 0.08 8.33 1.25 9.58

DSR-12

Page 1728 of 2298

Amount

13.65 26.00 37.05 4.07 80.77 0.81 81.58 12.24 93.82

Amount 13.65 13.00 24.70 4.07 55.42 0.55 55.97 8.40 64.37

Amount

40.95 26.00 61.75 6.20 134.90 1.35 136.25 20.44 156.69

DSR-12

Page 1729 of 2298

Amount

26.00 61.75 4.07 91.82 0.92 92.74 13.91 106.65

Amount

5.20 14.82 0.58 20.60 0.21 20.81 3.12 23.93

ht of one metre or part thereof beyond 5

Amount

5.20 14.82 0.58 20.60 0.21 20.81 3.12 23.93

DSR-12

Page 1730 of 2298

Amount

60.20 49.40 109.60 1.10 110.70 16.61 127.31

Amount

81.90 29.64 59.28 4.07 174.89 1.75 176.64 26.50 203.14

Amount 161.07 44.46 59.28 4.07 268.88 2.69 271.57 40.74 312.31

DSR-12

Page 1731 of 2298

Amount 61.75 247.00 4.07 312.82 3.13 315.95 47.39 363.34

Amount 437.19 185.25 12.01 634.45 6.34 640.79 96.12 736.91

Amount 147.42 39.52 59.28 3.68 249.90 2.50 252.40 37.86 290.26

Amount 61.75

DSR-12

Page 1732 of 2298

153.14 1.55 216.44 2.16 218.60 32.79 251.39

Amount 136.50 247.00 10.07 393.57 3.94 397.51 59.63 457.14

Amount 54.60 123.50 7.94 186.04 1.86 187.90 28.19 216.09

Amount 437.19 185.25 12.01 634.45 6.34 640.79 96.12

DSR-12

Page 1733 of 2298

736.91

Amount 293.93 298.87 12.01 604.81 6.05 610.86 91.63 702.49

Amount 427.31 61.75 12.01 501.07 5.01 506.08 75.91 581.99

Amount 133.38 5.42 138.80 1.39 140.19 21.03 161.22

DSR-12

Page 1734 of 2298

Amount 123.50 123.50 0.77 247.77 2.48 250.25 37.54 287.79

Amount

26.43 16.55 0.39

19.95 2.13 65.45 0.65 66.10 9.92 76.02

Amount

23.96 14.82 0.39 19.95 12.01 4.07 75.20 0.75 75.95 11.39 87.34

DSR-12

Page 1735 of 2298

Amount 4.07 2.13 6.20 0.06 6.26 0.94 7.20

Amount

864.50 7.94 872.44 8.72 881.16 132.17 1013.33

Amount 27.30 61.75 61.75 4.07 154.87 1.55 156.42 23.46 179.88

DSR-12

Page 1736 of 2298

Amount 27.30 98.80 49.40 6.20 181.70 1.82 183.52 27.53 211.05

Amount 40.95 49.40 49.40 7.94 147.69 1.48 149.17 22.38 171.55

Amount 54.60 61.75 61.75 10.07 188.17 1.88 190.05 28.51 218.56

Amount 54.60

DSR-12

Page 1737 of 2298

74.10 74.10 19.95 222.75 2.23 224.98 33.75 258.73

0 mm. Amount 54.60 494.00 123.50 19.95 692.05 6.92 698.97 104.85 803.82

40 mm upto 75 mm.

Amount 81.90 741.00 185.25 28.09 1036.24 10.36 1046.60 156.99 1203.59

Amount 54.60 74.10 7.94

DSR-12

Page 1738 of 2298

136.64 1.37 138.01 20.70 158.71

Amount 88.92 88.92 1.36 179.20 1.79 180.99 27.15 208.14

Amount 88.92 93.86 2.32 185.10 1.85 186.95 28.04 214.99

Amount 88.92 98.80 3.10 190.82 1.91 192.73 28.91 221.64

DSR-12

Page 1739 of 2298

Amount

1185.60 592.80 133.65 1912.05 19.12 1931.17 289.68 2220.85

Amount

2371.20 1185.60 160.38 3717.18 37.17 3754.35 563.15 4317.50

Amount

163.02 163.02 53.46 379.50

DSR-12

Page 1740 of 2298

3.80 383.30 57.50 440.80

Amount

163.02 163.02 106.83 432.87 4.33 437.20 65.58 502.78

Amount

2114.71 A 1355.05 B 207.00 11.40 171.99 1111.50 80.19 5051.84 15.82 5067.66 239.69 5307.35

DSR-12

Page 1741 of 2298

Amount

2257.26 A 1446.39 B 463.50 34.20 354.90 1852.50 120.29 6529.04 28.25 6557.29 428.05 6985.34

Amount

2403.74 A 1540.24 B 630.00 68.10 614.25 2840.50 200.48 8297.31 43.53 8340.84 659.53 9000.37

DSR-12

Page 1742 of 2298

Amount

1314.04 1348.62 80.60 630.00 68.10 614.25 2840.50 200.48 7096.59 70.97 7167.56 1075.13 8242.69

Amount

3907.54 4013.75 241.80 1386.00 150.00 2730.00 4940.00 267.31 17636.40 176.36 17812.76 2671.91 20484.67

DSR-12

Page 1743 of 2298

Amount

286.52 293.93 18.20 88.92 93.86 2.32 783.75 7.84 791.59 118.74 910.33

Amount

306.28 316.16 18.20 88.92 217.36 5.62 952.54 9.53 962.07 144.31 1106.38

Amount

DSR-12

Page 1744 of 2298

123.50 34.58 1.94 10.65 170.67 1.71 172.38 25.86 198.24

Amount

71.63 19.76 0.97 7.94 100.30 1.00 101.30 15.20 116.50

Amount

200.07 125.97

DSR-12

Page 1745 of 2298

2.71 39.52 17.29 0.77 75.25 36.12 32.76 260.00 247.00 80.19 1117.65 11.18 1128.83 169.32 1298.15

Amount

34.58 22.23 0.39 61.75 54.34 0.77 32.11 14.82 0.58 10.65 232.22 2.32 234.54 35.18 269.72

Amount 75.25 123.50 26.73

DSR-12

Page 1746 of 2298

225.48 2.25 227.73 34.16 261.89

Amount 180.60 109.20 395.20 133.65 818.65 8.19 826.84 124.03 950.87

Amount

722.40 420.42 1580.80 133.65 2857.27 28.57 2885.84 432.88 3318.72

Amount 451.50 273.00 988.00

DSR-12

Page 1747 of 2298

1712.50 17.13 1729.63 259.44 1989.07

m (outside to outside).

Amount

46.93 29.64 0.58 86.45 74.10 1.36 14.82 7.41 0.19 261.48 2.61 264.09 39.61 303.70

m (outside to outside).

Amount

DSR-12

Page 1748 of 2298

76.57 46.93 0.97 123.50 103.74 1.94 32.11 14.82 0.58 401.16 4.01 405.17 60.78 465.95

- 320 x 120 cm (outside to outside)

Amount

108.68 69.16 1.36 170.43 145.73 2.32 46.93 22.23 0.77 567.61 5.68 573.29 85.99 659.28

DSR-12

Page 1749 of 2298

Amount 88.92 19.76 18.20 2.13 129.01 1.29 130.30 19.55 149.85

Amount 54.60 74.10 8.02 136.72 1.37 138.09 20.71 158.80

. Amount 7.80 130.00 123.50 136.50 123.50 225.00 67.50 112.50 926.30 9.26 935.56 140.33 1075.89

DSR-12

Page 1750 of 2298

Amount 2.60 74.10 64.13 2.70 143.53 1.44 144.97 21.75 166.72

ls by mechanical means, including loading, ds including all lifts involved.

Amount 87.60 87.60 0.88 88.48 13.27 101.75

Amount

468.00 4446.00 66.69 81.00 13.34 40.13 2.13 10.07

DSR-12

Page 1751 of 2298

81.00 13.34 40.13 2.13 10.07 5274.03 52.74 5326.77 799.02 6125.79

. Amount

44.20

12.00 1.98 5.95 0.58 2.13 66.84 0.67 67.51 10.13 77.64

Amount 75.00 487.50 212.50 95.22 870.22 8.70 878.92 131.84 1010.76

DSR-12

Page 1752 of 2298

Amount 75.00 552.50 225.00 95.22 947.72 9.48 957.20 143.58 1100.78

Amount 42.50 270.00 617.50 95.22 1025.22 10.25 1035.47 155.32 1190.79

Amount 330.00 95.22 425.22 4.25 429.47 64.42 493.89

DSR-12

Page 1753 of 2298

Amount 360.00 95.22 455.22 4.55 459.77 68.97 528.74

Amount 52.50 840.00 172.50 87.60 1152.60 11.53 1164.13 174.62 1338.75

Amount 105.00 862.50 172.50 74.46 13.14 1227.60 12.28 1239.88 185.98 1425.86

Amount

DSR-12

Page 1754 of 2298

900.00 87.60 987.60 9.88 997.48 149.62 1147.10

Amount 43.72 41.25 30.00 109.50 224.47 2.24 226.71 34.01 260.72

Amount 450.00 87.60 537.60 5.38 542.98 81.45 624.43

dam specifications i/c spreading in uniform

Amount 64.22 64.22 67.60

49.50 8.15

DSR-12

Page 1755 of 2298

24.36 2.13 4.07 284.25 2.84 287.09 43.06 330.15

nt (Jhama) brick agg. 120 mm to 40 mm.

Amount 86.45 64.22 46.80

6.00 0.99 2.97 0.58 4.07 212.08 2.12 214.20 32.13 246.33

nt (Jhama) brick agg. 90 mm to 45 mm.

Amount 86.45 64.22 46.80

6.00 0.99 2.97 0.58 4.07 212.08 2.12 214.20 32.13

DSR-12

Page 1756 of 2298

246.33

er. Amount

540.00 52.56

133.38 140.40

81.00 13.34 40.13 2.13 1002.94 10.03 1012.97 151.95 1164.92

n 75. Amount 464.00 37.38 51.17 46.41 86.45 26.73 13.37 725.51 7.26 732.77 109.92 842.69

DSR-12

Page 1757 of 2298

75. Amount 142.10 11.45 12.04 10.92 22.23 6.20 204.94 2.05 206.99 31.05 238.04

Amount 333.45 266.76

198.00 32.60 98.11 2.13 8.14 939.19 9.39 948.58 142.29 1090.87

Amount

970.13 A

DSR-12

Page 1758 of 2298

3675.00 714.15

1376.52 B

749.32 C

481.65 649.61 351.00 202.50 33.35 100.33 16.08 30.02 81.00 13.34 40.13 0.82 9484.95 63.89 9548.84 967.93 10516.77

Amount

945.00 393.24 325.08 294.84 531.05 397.67 10.07 2896.95 28.97 2925.92 438.89 3364.81

bricks with class designation 75.

DSR-12

Page 1759 of 2298

Amount 1870.50 150.67 120.40 109.20 266.76 2517.53 25.18 2542.71 381.41 2924.12

Amount

107.17 A 26.38 B 13.74 C 96.60 8.06 407.00 0.96

237.12 118.56 59.28 59.28

175.37 118.56 26.00

118.56 118.56 60.24 1751.44

DSR-12

Page 1760 of 2298

16.04 1767.48 243.03 2010.51

Amount

107.17 A

26.38 B 13.74 C

118.56 59.28 59.28 59.28

118.56 118.56 26.00 80.19 787.00 6.40 793.40 96.92 890.32

Amount

93.10 18.09

DSR-12

Page 1761 of 2298

68.83 A 37.47 B

395.20 197.60 810.29 7.04 817.33 106.65 923.98

gs or 6 mm bar nibs wherever required.

Amount

1648.07 A

8.40 17.42 3.91 3.55 3.38

1537.49 B

DSR-12

Page 1762 of 2298

1166.49 C

250.00 3.89 44.80 6.13 12.35 5.20 183.68 197.60 70.20 2.91 19.76 17.24 80.19 18.21 20.14 5321.01 9.69 5330.70 146.80 5477.50

Amount

11610.00 16.23 11626.23 116.26 11742.49 1761.37 13503.86

Amount 15.00 70.00 4.07

DSR-12

Page 1763 of 2298

27.30 116.37 1.16 117.53 17.63 135.16

th horizontal lines &2 diagonals of barbed

Amount

1604.25 2.33 73.61 36.12 32.76 123.50 150.50 136.50 20.14 2179.71 21.80 2201.51 330.23 2531.74

part provided with 6 horizo- ntal lines and eparately) : With G.I. barbed wi

Amount

1604.25 2.41

DSR-12

Page 1764 of 2298

1351.60 A 73.61

36.12 32.76 123.50 150.50 136.50 3511.25 21.60 3532.85 327.19 3860.04

Amount

4462.50 8.18 204.75 123.50 273.00 247.00 29.44 5348.37 53.48 5401.85 810.28 6212.13

gn.(cost of posts, welded steel wire fabric,

Amount

36.12 32.76 123.50 150.50 136.50

DSR-12

Page 1765 of 2298

80.19 80.19 639.76 6.40 646.16 96.92 743.08

Amount

114.38 10.07 124.45 1.24 125.69 18.85 144.54

Amount 60.00 29.64 6.20 95.84 0.96 96.80 14.52 111.32

e. Amount

DSR-12

Page 1766 of 2298

98.10 A

0.49 1.04 0.24 0.22 0.21

74.94 B

83.44 C

9.00 0.14 24.64 3.37 0.67 0.05 0.15 0.07 7.46 9.39 11.96 1.01 0.89 29.64 6.20 363.32 1.07 364.39 16.19 380.58

finishing smooth in 1 : 3. 35 x 111 x 25 cm

Amount

DSR-12

Page 1767 of 2298

490.50 A

2.47 5.20 1.20 1.09 1.04

273.06 B

181.90 C

270.00 4.20 7.04 0.96 1.98 0.18 0.04 0.19 21.53 27.42 35.36 2.91 2.71 49.40 20.14 1400.52

DSR-12

Page 1768 of 2298

4.55 1405.07 68.94 1474.01

finishing smooth in 1 : 3. 50 x 152.52 x 25

Amount

931.94 A

4.69 9.88 2.41 2.18 2.08

518.31 B

287.03 C

450.00 7.01 128.00 17.52 3.21

DSR-12

Page 1769 of 2298

0.26 0.77 0.39 36.16 45.70 59.02 5.04 4.26 49.40 20.14 2585.40 8.48 2593.88 128.49 2722.37

inishing smooth in 1 : 3. 35 x 93.5 x 18 cm

Amount

294.30 A

1.48 3.12 0.72 0.66 0.62

163.50 B

135.17 C

DSR-12

Page 1770 of 2298

210.00 3.27 5.76 0.79 1.48 0.16 0.39 0.19 16.65 21.24 27.30 2.32 1.94 24.70 20.14 935.90 3.43 939.33 51.95 991.28

Sqm with 1.65 Cum of stone chipping 13.2

Amount 8325.00 19.71

1732.50 144.54 180.00 4.50

28.60 345.80 345.80 24.08 28.60 229.71 28.60 229.71 382.85 66.69

DSR-12

Page 1771 of 2298

28.60 165.00 96.00 33.00 82.58 4.07 2.20 5.76 10.07 10.07 12554.04 125.54 12679.58 1901.94 14581.52

Amount

15.77 1575.00

131.40 144.00 3.60

345.80

24.08 28.60 340.86

70.20 209.95 6660.00 209.95 165.00 27.17

DSR-12

Page 1772 of 2298

96.00 28.60 33.00 82.58 2.20 5.76 4.07 4070.00 1050.00 9.64 87.60 10.07 88.00 24.41 2.20 90.00 21.00 44.59 48.00 0.60 1.62 345.80 15.60 239.59 28.60 15.05 18.20 185.25 18.20 153.14 153.14 37.05 15.60 2.13 14.14 16992.81 169.93 17162.74 2574.41 19737.15

Amount 7215.00 1575.00 17.08 131.40 156.00 3.90

DSR-12

Page 1773 of 2298

15.60 121.03 239.59 15.05 15.60 170.43 171.60 125.97 125.97 37.05 15.60 90.00 44.59 2.13 18.00 48.00 1.00 2.16 4.07 7.94 10369.76 103.70 10473.46 1571.02 12044.48

0 % bitumen content-RS grade conforming

Amount 5557.50 17.08 1575.00 131.40

28.60 345.80 345.80 21.07 26.00 247.00 28.60 209.95

DSR-12

Page 1774 of 2298

209.95 66.69 70.20 165.00 30.00 82.58 4.07 2.20 5.76 10.07 14.14 9194.46 91.94 9286.40 1392.96 10679.36

0 % bitumen content-RS grade conforming

Amount 3477.00 10.69 1155.00 96.36

15.60 121.03 239.59 15.05 15.60 155.61 18.20 153.14 153.14 37.05 39.00 90.00 18.00 44.59 2.13 2.20 5.76 4.07 7.94

DSR-12

Page 1775 of 2298

5876.75 58.77 5935.52 890.33 6825.85

5 Kg/Sqm. Amount 2812.50 6.57 60.00 1.50 1.00 2.16 11.62 9.00 13.56

15.60 360.62 46.93 116.09 3457.15 34.57 3491.72 523.76 4015.48

rface @ 0.50 Kg/Sqm.

Amount 1875.00 4.38 40.00 1.00 1.00 2.16 11.62 9.00 11.62

15.60

DSR-12

Page 1776 of 2298

360.62 46.93 116.09 2495.02 24.95 2519.97 378.00 2897.97

g preparing the surface & cleaning with sqm

Amount 38780.00 122.64 1008.00 910.00 1600.00 20.80 494.00 42935.44 429.35 43364.79 6504.72 49869.51

g preparing the surface & cleaning with kg/sqm

Amount 24237.50 76.65 1008.00 910.00 1600.00 20.80

DSR-12

Page 1777 of 2298

494.00 28346.95 283.47 28630.42 4294.56 32924.98

g preparing the surface & cleaning with kg/sqm

Amount 39480.00 122.64 1008.00 910.00 1600.00 20.80 494.00 43635.44 436.35 44071.79 6610.77 50682.56

g preparing the surface & cleaning with 25kg/sqm

Amount 24675.00 76.65 1008.00 910.00 1600.00 20.80 494.00 28784.45 287.84 29072.29

DSR-12

Page 1778 of 2298

4360.84 33433.13

size and 11.2 mm size and 52 kg and 56 kg alt.

Amount

5400.00 12.61 231.84 0.88 1890.00 945.00 236.52 115.20 2.88

20.80 345.80 345.80 140.79 57.19 1235.00 66.69 28.60 165.00 82.58 4.07 104.00 160.00 2.20 5.76 10.07 14.14 11623.42 116.23 11739.65 1760.95 13500.60

DSR-12

Page 1779 of 2298

size and 11.2 mm size and 52 kg and 56 kg

Amount

5544.00 12.61 1890.00 945.00 236.52 115.20 2.88

20.80 345.80 345.80 140.79 57.19 1235.00 66.69 28.60 165.00 82.58 4.07 104.00 160.00 2.20 5.76 10.07 14.14 11534.70 115.35 11650.05 1747.51 13397.56

DSR-12

Page 1780 of 2298

size and 11.2 mm size and 52 kg and 56 kg to IRC : SP : 53-1999.

Amount

5544.00 12.61 231.84 0.88 1890.00 945.00 236.52 115.20 2.88

20.80 345.80 345.80 140.79 57.19 1235.00 66.69 28.60 165.00 82.58 4.07 104.00 160.00 2.20 5.76 10.07 14.14 11767.42 117.67 11885.09 1782.76 13667.85

DSR-12

Page 1781 of 2298

mm and 11.2 mm size respectively per 100 g of asphalt.

Amount

6750.00 289.80 15.77 1.10 2362.50 1176.00 295.21 144.00 3.60

20.80 345.80 345.80 175.37 57.19 1543.75 66.69 28.60 165.00 82.58 4.07 120.00 160.00 2.20 5.76 10.07 14.14 14185.80 141.86 14327.66 2149.15 16476.81

mm and 11.2 mm size respectively per 100

DSR-12

Page 1782 of 2298

Amount

6930.00 15.77 2362.50 1176.00 295.21 144.00 3.60

20.80 345.80 345.80 175.37

57.19 1543.75 66.69 28.60 165.00 82.58 4.07 120.00 160.00 2.20 5.76 10.07 14.14 14074.90 140.75 14215.65 2132.35 16348.00

mm and 11.2 mm size respectively per 100 nforming to IRC : SP : 53-1999.

Amount

DSR-12

Page 1783 of 2298

6930.00 289.80 15.77 1.10 2362.50 1176.00 295.21 144.00 3.60

20.80 345.80 345.80 175.37 57.19 1543.75 66.69 28.60 165.00 82.58 4.07 120.00 160.00 2.20 5.76 10.07 14.14 14365.80 143.66 14509.46 2176.42 16685.88

100 Sqm and bitumen emulsion (medium

Amount 6486.00 20.15

DSR-12

Page 1784 of 2298

2520.00 210.24

57.19 874.38 66.69 28.60 165.00 82.58 4.07 160.00 14.14 10689.04 106.89 10795.93 1619.39 12415.32

100 Sqm and bitumen emulsion (medium

Amount 8121.60 25.23 3150.00 262.80

57.19 1012.70 66.69 28.60 165.00 82.58 4.07 14.14 12990.60 129.91 13120.51 1968.08 15088.59

DSR-12

Page 1785 of 2298

penetration grade : For 50 mm compacted

Amount

9490.50 10258.50 1869.00 555.00 2446.50 2793.00 518.00 951.25 1059.96 388.94 101.62 69375.00 162.06 4117.49 1316.51 659.49 328.51 174.20 328.51 1647.49 165.49 460.20 360.00 915.00 522.99

2104.96 104.40 113174.57 1131.75 114306.32 17145.95 131452.27

penetration grade : For 75 mm compacted

DSR-12

Page 1786 of 2298

Amount

7290.00 771.28 15309.00 4536.00 2050.00 2698.50 850.50 76500.00 2131.31 178.70 6175.00 1976.00 988.00 494.00 260.00 494.00 2470.00 247.00 689.00 400.00 1125.00 639.21

2209.02 108.86 130590.38 1305.90 131896.28 19784.44 151680.72

thick. Amount

DSR-12

Page 1787 of 2298

3774.00 8.94

21.00 212.10

76.78

174.00

9.45

11.10 0.03 20.24 7.27 15.24 4129.00 203.39 390.00 150.50 910.00 65.00 130.00 370.00 228.37 10906.41 109.06 11015.47 1652.32 12667.79

thick. Amount

DSR-12

Page 1788 of 2298

3774.00 8.94

21.00 212.10

76.78

174.00

9.45

11.10 0.03 20.24 7.27 15.24 4129.00 203.39 390.00 150.50 910.00 65.00 130.00 370.00 228.37 10906.41 109.06 11015.47 1652.32 12667.79

per kg of asphalt. Amount

11362.50

DSR-12

Page 1789 of 2298

487.83 26.54 1.86 1039.50 693.00 144.54 242.40 6.07 1848.00 144.54

41.60 345.80 345.80 293.93

72.24 1511.64 83.98 33.80 195.00 168.00 200.00 96.62 7.94 2.60 7.20 10.65 13.37 19426.95 194.27 19621.22 2943.18 22564.40

Amount

11665.50 26.54 1039.50 693.00 144.54

DSR-12

Page 1790 of 2298

242.40 6.07 1848.00 144.54

41.60 345.80 345.80 293.93

72.24 1511.64 83.98 33.80 195.00 168.00 200.00 96.62 7.94 2.60 7.20 10.65 13.37 19240.26 192.40 19432.66 2914.90 22347.56

55 Conforming to IRC : SP 53-1999.

Amount

11665.50 487.83 26.54 1.86 1039.50 693.00 144.54 242.40 6.62

DSR-12

Page 1791 of 2298

1848.00 144.54

41.60 345.80 345.80 293.93

72.24 1511.64 83.98 33.80 195.00 168.00 200.00 96.62 7.94 2.60 7.20 10.65 13.37 19730.50 197.31 19927.81 2989.17 22916.98

Kg of asphalt. Amount

17962.50 771.19 2.93 41.96 1638.00 1092.00 227.76 2912.00 227.76 383.20 9.59

DSR-12

Page 1792 of 2298

41.60 345.80 345.80 464.36

93.31 2336.62 111.15 46.80 270.00 133.78 240.00 120.00 6.59 1.80 4.86 7.94 24.02 29863.32 298.63 30161.95 4524.29 34686.24

t. Amount

18441.50 41.96 1638.00 1092.00 227.76 2912.00 227.76 383.20 9.59

41.60 345.80 345.80 464.36

DSR-12

Page 1793 of 2298

93.31 2336.62 111.15 46.80 270.00 133.78 240.00 120.00 6.59 1.80 4.86 7.94 24.02 29568.20 295.68 29863.88 4479.58 34343.46

Conforming to IRC : SP 53-1999.

Amount

18441.50 771.19 2.93 41.96 1638.00 1092.00 227.76 2912.00 227.76 383.20 9.59

41.60 345.80 345.80 464.36

93.31

DSR-12

Page 1794 of 2298

2336.62 111.15 46.80 270.00 133.78 240.00 120.00 6.59 1.80 4.86 7.94 24.02 30342.32 303.42 30645.74 4596.86 35242.60

sieve) with bitumen using 128 Kg of grade

Amount 2880.00 6.73 672.00 52.56 614.40 15.38

15.60 121.03 239.59 74.10

274.17 15.05 37.05 15.60 90.00 40.00 40.00 44.59 0.39 1.00 2.16

DSR-12

Page 1795 of 2298

27.12 5278.52 52.79 5331.31 799.70 6131.01

Amount 3675.00 8.58 990.00 78.84 784.00 19.62

12.04 15.60 170.43 28.60 345.80 345.80 13.00 125.97 37.05 15.60 90.00 18.00 44.59 48.00 1.00 2.16 27.12 4.07 6900.87 69.01 6969.88 1045.48 8015.36

DSR-12

Page 1796 of 2298

Amount

231.00 494.00 115.50 49.51 28.91 498.40 38.98 1600.00 24.92 28.70 402.61 182.00 61.60 21.00 38.74

67.92 A 2.13 3885.92 38.18 3924.10 578.43 4502.53

rse sand and graded stone aggregate of 40

Amount 1700.00 26.48 494.00 231.00 115.50 498.40 49.51 28.91 38.98

494.00

DSR-12

Page 1797 of 2298

70.20 15.05 13.65 10.40 20.09 17.29 350.00 130.00

8.13 20.00 49.55 10.32 10.32

361.86 74.50 4838.14 48.38 4886.52 732.98 5619.50

rse sand and graded stone aggregate of 40

Amount 1700.00 26.48 494.00 231.00 115.50 498.40 49.51 28.91 38.98

494.00 70.20 15.05 13.65 10.40 20.09 17.29

DSR-12

Page 1798 of 2298

350.00 300.00 130.00

8.13 20.00 49.55 10.32 10.32

361.86 74.50 5138.14 51.38 5189.52 778.43 5967.95

Amount 37.00 37.00 0.37 37.37 5.61 42.98

Amount

15750.00

18.40 273.00 741.00 40.10 16822.50 168.23

DSR-12

Page 1799 of 2298

16990.73 2548.61 19539.34

sealing comp- ound in expansion joints.

Amount

799.76 2.63 273.00 617.50 30.80 1723.69 17.24 1740.93 261.14 2002.07

inish paint of superior make like Goodlas

Amount

474.30 7.55 147.42 133.38 54.24 816.89 8.17 825.06 123.76 948.82

DSR-12

Page 1800 of 2298

inish paint of superior make like Goodlas

Amount 282.20 1.67 98.28 88.92 36.42 507.49 5.07 512.56 76.88 589.44

onforming to IS : 164,:- New work (Two or

Amount 177.60 3.95 26.00 147.42 414.96 54.24 824.17 8.24 832.41 124.86 957.27

onforming to IS : 164,:- Old work (One or

Amount 106.80 0.97 15.60 98.28 276.64 36.42

DSR-12

Page 1801 of 2298

534.71 5.35 540.06 81.01 621.07

ot path i/c providing CC 1:3:6 for shape of

Amount

122.93 A

539.00 B

7846.80 C

1373.64 D

1419.25 E

DSR-12

Page 1802 of 2298

2197.81 F

656.63 G

149.69 H 120.00 1.87 32.00 4.38 8.65 0.78 1.89 1.89 94.71 120.54 156.00 12.98 11.35 14872.79 5.67 14878.46 85.91 14964.37

P/ ABS having electronically welded micro-

Amount 2700.00 3.87 136.50 123.50 58.11 3021.98 30.22 3052.20 457.83 3510.03

DSR-12

Page 1803 of 2298

mum thickness 15 cm. Amount

90.20 5.96 2.15 24.27

28.65 28.65 19.65 71.72 6.18 6.18 0.20 1.20 0.59 0.00 0.27 64.22 64.22 46.80 461.11 4.61 465.72 69.86 535.58

Amount

1961.89 177.84 148.20 50.00 8.76 2.20 2.64

DSR-12

Page 1804 of 2298

0.91 402.95 225.87 194.39 68.12 18.21

2.50 0.44 270.90 489.06 13.00 4037.88 40.38 4078.26 611.74 4690.00

th) upto 3.0 m height of wall with existing

Amount 3650.00

2295.00 400.00 73.61

247.00 150.50 136.50 6952.61 69.53 7022.14 1053.32 8075.46

for profile corrective base/ binding course average compacted thickness ..

DSR-12

Page 1805 of 2298

Amount

866250.00 1971.00

42750.00 44887.50 41895.00 43890.00 131100.00 24466.68 18810.00

580.79 71100.00 52500.00 16200.00 5400.00 4800.00 13500.00

1350.00 1794.00 6045.00

4485.00 218.40 3458.00

1300.00 1398751.37 13987.51 1412738.88 211910.83 1624649.71

DSR-12

Page 1806 of 2298

ing with paver finisher and rolling with RR: ge by weight of total mix) and lime fill

Amount

866250.00 1971.00

42750.00 44887.50 41895.00 43890.00 131100.00 24466.68 18810.00 580.79 84000.00 16200.00 5400.00 4800.00 13500.00

1350.00 1794.00 6045.00

4485.00 218.40 3458.00

DSR-12

Page 1807 of 2298

1300.00 1359151.37 13591.51 1372742.88 205911.43 1578654.31

profile corrective base/ binding course i/c compacted thickness with bitumen of

Amount

606375.00 1379.70

57900.00 60795.00 60795.00 63690.00 66585.00 25360.20 71100.00 52500.00 16200.00 5400.00 4800.00 13500.00

1350.00 1794.00 6045.00

DSR-12

Page 1808 of 2298

4485.00 218.40 3458.00

1300.00 1125030.30 11250.30 1136280.60 170442.09 1306722.69

rading premixed with bituminous binder .. centage by weight of total mix) prepared i

Amount

606375.00 1379.70

57900.00 60795.00 60795.00 63690.00 66585.00 25360.20 84000.00 16200.00 5400.00 4800.00 13500.00

1350.00

DSR-12

Page 1809 of 2298

1794.00 6045.00

4485.00

218.40 3458.00 1300.00 1085430.30 10854.30 1096284.60 164442.69 1260727.29

VG -30 @ 5% .. .. Amount

866250.00 1971.00

85286.25 85286.25 134377.50 24466.68 18810.00 580.79 71100.00 52500.00 16200.00 5400.00 4800.00 13500.00 1350.00 1794.00

DSR-12

Page 1810 of 2298

6045.00

4485.00 218.40 3458.00

1397878.87 13978.79 1411857.66 211778.65 1623636.31

ade VG- 30 @5% (percentage by weight of pe Hot Mix Plant of 60-90 TPH capacity.

Amount

866250.00 1971.00

85286.25 85286.25 134377.50 24466.68 18810.00 580.79 84000.00 16200.00 5400.00 4800.00 13500.00 1350.00 1794.00 6045.00

DSR-12

Page 1811 of 2298

4485.00

218.40 3458.00 1358278.87 13582.79 1371861.66 205779.25 1577640.91

or wearing course, loading, tansporting to itumen grade CRMB-60 @ 5.5% by weight

Amount

952875.00 2168.10

44651.25 44651.25 37212.00 38984.00 136930.50 24090.00 28072.00

866.36 71100.00 52500.00 16200.00 5400.00 4800.00 13500.00

DSR-12

Page 1812 of 2298

1350.00 1794.00 6045.00

4485.00 218.40 3458.00

1300.00 1492650.86 14926.51 1507577.37 226136.61 1733713.98

e VG-30 @5.5% (percentage by weight of c additive @8% (percentage by weight of

Amount

952875.00 2168.10

79200.00 44651.25 44651.25 37212.00 38984.00 136930.50 24090.00 28072.00

866.36

DSR-12

Page 1813 of 2298

71100.00 52500.00 16200.00 5400.00 4800.00 13500.00 1350.00 1794.00 6045.00

4485.00 218.40 3458.00

1300.00 1571850.86 15718.51 1587569.37 238135.41 1825704.78

ade PMB-40 @5.5% and lime filler @ 3%

Amount

1024650.00 2168.10

44651.25 44651.25 37212.00 38984.00 136930.50 24090.00 28072.00

DSR-12

Page 1814 of 2298

866.36 71100.00 52500.00 16200.00 5400.00 4800.00 13500.00 1350.00 1794.00 6045.00

4485.00 218.40 3458.00

1300.00 1564425.86 15644.26 1580070.12 237010.52 1817080.64

me filler @ 3% prepared in Batch Type Hot

Amount

960300.00 2168.10

44651.25 44651.25 37212.00 38984.00 136930.50 24090.00 28072.00

DSR-12

Page 1815 of 2298

866.36 71100.00 52500.00 16200.00 5400.00 4800.00 13500.00 1350.00 1794.00 6045.00

4485.00 218.40 3458.00

1300.00 1500075.86 15000.76 1515076.62 227261.49 1742338.11

me filler @ 3% prepared in drum Type Hot

Amount

952875.00 2168.10

44651.25 44651.25 37212.00 38984.00 136930.50 24090.00

DSR-12

Page 1816 of 2298

28072.00

866.36 84000.00 16200.00 5400.00 4800.00 13500.00 1350.00 1794.00 6045.00

4485.00

218.40 3458.00 1300.00 1453050.86 14530.51 1467581.37 220137.21 1687718.58

5% and lime filler @ 3% and waste plastic

Amount

952875.00 2168.10

79200.00

DSR-12

Page 1817 of 2298

44651.25 44651.25 37212.00 38984.00 136930.50 24090.00 28072.00

866.36 84000.00 16200.00 5400.00 4800.00 13500.00 1350.00 1794.00 6045.00

4485.00

218.40 3458.00 1300.00 1532250.86 15322.51 1547573.37 232136.01 1779709.38

.5% and lime filler @ 3% prepared in drum

Amount

1024650.00 2168.10

DSR-12

Page 1818 of 2298

44651.25 44651.25 37212.00 38984.00 136930.50 24090.00 28072.00

866.36 84000.00 16200.00 5400.00 4800.00 13500.00 1350.00 1794.00 6045.00

4485.00

218.40 3458.00 1300.00 1524825.86 15248.26 1540074.12 231011.12 1771085.24

.5% and lime filler @ 3% prepared in drum

Amount

960300.00 2168.10

DSR-12

Page 1819 of 2298

44651.25 44651.25 37212.00 38984.00 136930.50 24090.00 28072.00

866.36 84000.00 16200.00 5400.00 4800.00 13500.00 1350.00 1794.00 6045.00

4485.00

218.40 3458.00 1300.00 1460475.86 14604.76 1475080.62 221262.09 1696342.71

sheet, face to be fully covered with high ory sign boards of 900 mm dia.

Amount

823.20

DSR-12

Page 1820 of 2298

0.31

1494.50

1441.49 A

2.60 61.75 96.85

57.64 B 67.10 C

116.22 4161.66 25.95 4187.61 393.21 4580.82

DSR-12

Page 1821 of 2298

sheet, face to be fully covered with high g sign boards of equilateral triangular ..

Amount

457.80 0.17

838.75

1400.25 A

2.60 61.75 96.85

55.81 B

36.93 C

DSR-12

Page 1822 of 2298

96.85 3047.76 15.55 3063.31 235.55 3298.86

minium sheet, face to be fully covered with ming to type-III of ASTM-D-4956-01:

Amount 4445.70

1.65

7686.00

39.10 77.48 581.10 840.36 379.84 A

14051.23 136.71 14187.94 2071.22 16259.16

aluminium sheet, face to be fully covered eer-in- charge as per IRC; 67: 2001,

DSR-12

Page 1823 of 2298

Amount

835.80

1494.50

1979.64 A

2.60 61.75 104.64

58.72 B 67.00 C 46.49 4651.14 25.46 4676.60 385.69 5062.29

g hot thermoplastic material by fully/ semi

Amount

33075.00

DSR-12

Page 1824 of 2298

1550.00 750.00 1600.00 3624.06

327.00 1040.00 542.36 1037.40 43545.82 435.46 43981.28 6597.19 50578.47

hick compacted bed of dry brick ballast of

Amount 500.00 95.22 40.00 7.01 86.45 64.22 46.80 1944.10 A 2783.80 8.40 2792.20 127.22 2919.42

with jamuna sand. Amount 500.00 95.22 40.00 7.01 86.45

DSR-12

Page 1825 of 2298

64.22 46.80 839.70 8.40 848.10 127.22 975.32

ectors are mounted on M.S pipe of 65 mm

Amount 310.00 116.22 58.11 484.33 4.84 489.17 73.38 562.55

required in layer: All kind of soil.

Amount

392.34 A 20.14 412.48 0.20 412.68 3.05 415.73

x 450x 50 mm in footpath to the required

Amount 2640.00 77.48

DSR-12

Page 1826 of 2298

782.49 315.70 286.00 135.85 70.20 16.08 4323.80 43.24 4367.04 655.06 5022.10

making machine over and i/c 50 mm thick

Amount 3250.00 560.00 43.80 96.00 13.14

150.50 136.50 247.00 123.50 4620.44 46.20 4666.64 700.00 5366.64

Amount

29825.25 302.62 752.50 682.50 617.50 407.55 32587.92 325.88

DSR-12

Page 1827 of 2298

32913.80 4937.07 37850.87

ening with 2 mm dia. wire: Made of G.I. of

Amount

2709.00 232.44 584.22 400.14 260.38 4186.18 41.86 4228.04 634.21 4862.25

ening with 2 mm dia. wire: Made of GI of

Amount

2992.50

232.44 584.22 400.14 260.38 4469.68 44.70 4514.38 677.16 5191.54

DSR-12

Page 1828 of 2298

wire of dia. 3 mm i/c strengthening with 2

Amount

3570.00 232.44 584.22 400.14 260.38 5047.18 50.47 5097.65 764.65 5862.30

Amount 945.00 231.89 1176.89 11.77 1188.66 178.30 1366.96

Amount 325.08 294.84 531.05 397.67 10.07 1558.71 15.59

DSR-12

Page 1829 of 2298

1574.30 236.15 1810.45

dation etc. complete with : Moorum.

Amount 3375.00 657.00

405.08 33.80 4470.88 44.71 4515.59 677.34 5192.93

lidation etc. complete with : Stone agg. 20

Amount 7875.00 657.00 506.35 33.80 9072.15 90.72 9162.87 1374.43 10537.30

lidation etc. complete with : Stone agg. 40

Amount

7125.00

DSR-12

Page 1830 of 2298

714.15 506.35 33.80 8379.30 83.79 8463.09 1269.46 9732.55

hall be laid and finished with screed board brush etc complete.

Amount

5590.62 A 85.23 61.98 5737.83 1.47 5739.30 22.30 5761.60

t. Amount

135.00 2.10

4.93 142.03 1.42 143.45 21.52 164.97

DSR-12

Page 1831 of 2298

Amount 2.60 61.75 13.50 125.00 48.96 251.81 2.52 254.33 38.15 292.48

fications, mixing in a mechanical mix plant BR Value-30

Amount

64800.00 75600.00 6855.84 6307.20 52155.00 4993.20 49680.00 49680.00 7568.64 7200.00 4200.00 675.00 4800.00

13500.00

1350.00

DSR-12

Page 1832 of 2298

14700.00 9300.00 104.00 520.00 1976.00 375964.88 3759.65 379724.53 56958.68 436683.21

fications, mixing in a mechanical mix plant CBR Value-25

Amount

50400.00 52920.00 4799.09 4415.04 65880.00 6307.20 66240.00 66240.00 10091.52 7200.00 4200.00 675.00 4800.00

13500.00

1350.00 14700.00 9300.00 104.00 520.00

DSR-12

Page 1833 of 2298

1976.00 385617.85 3856.18 389474.03 58421.10 447895.13

fications, mixing in a mechanical mix plant ng CBR Value-20

Amount

92232.00 8830.08 32940.00 3153.60 86940.00 86940.00 13245.12 7200.00 4200.00 675.00 4800.00

13500.00

1350.00 14700.00 9300.00 104.00 520.00 1976.00 382605.80 3826.06 386431.86 57964.78 444396.64

DSR-12

Page 1834 of 2298

to wet mix macadam (WMM) compacting

Amount

20047.50 21161.25 22275.00 23388.75 4242.05 3902.58 29700.00 31185.00 54351.00 10406.88 51232.50 51232.50 7805.16 7920.00 4200.00 450.00 4800.00

14850.00

1485.00 6000.00 6045.00 124.80 520.00 2470.00 379794.97 3797.95 383592.92 57538.94 441131.86

DSR-12

Page 1835 of 2298

se and fine aggregate conforming to IS:383

Amount

202500.00 212625.00 227360.00 337500.00 35478.00 17782.80 5256.23 4800.00 15000.00 5400.00 6000.00 12400.00 1200.00 29700.00

2970.00 291.20 1560.00 5434.00 1123257.23 11232.57 1134489.80 170173.47 1304663.27

ction of Engineer-in-Charge

Amount

DSR-12

Page 1836 of 2298

97.68 1518.00

227.92 A

592.57 B 2436.17 16.16 2452.33 244.78 2697.11

al of mortar etc. ..

Amount 185.25 741.00 2.98 929.23 9.29 938.52 140.78 1079.30

moval of rubbish etc.,

Amount 61.75 247.00 4.02 312.77 3.13 315.90 47.39 363.29

DSR-12

Page 1837 of 2298

d line, level, curvature, colour and pattern

Amount

560.00 43.80 96.00 13.14 150.50 136.50 247.00 123.50 1370.44 13.70 1384.14 207.62 1591.76

e, level and curvature, jointed with cement

Amount

302.62 752.50 682.50 617.50 407.55 2762.67 27.63 2790.30 418.55 3208.85

DSR-12

Page 1838 of 2298

evel flushing cistern : White Vitreous china

Amount 750.00 640.00 308.00 40.10

40.10 376.25 150.50 247.00 2551.95 25.52 2577.47 386.62 2964.09

585 x 480 mm Amount

3630.00 640.00 308.00 40.10 40.10 376.25 150.50 247.00 5431.95 54.32 5486.27 822.94 6309.21

rn - : W.C. pan white solid plastic seat and

Amount

DSR-12

Page 1839 of 2298

310.00 680.00 640.00

40.10

40.10 376.25 150.50 247.00 2483.95 24.84 2508.79 376.32 2885.11

ern - : W.C. pan with ISI marked black solid

Amount 293.00 680.00 640.00

40.10

40.10 376.25 150.50 247.00 2466.95 24.67 2491.62 373.74 2865.36

rn - : W.C. pan with ISI marked white solid

Amount

DSR-12

Page 1840 of 2298

310.00 680.00 1550.00 93.56 27.00 20.14 24.02 40.10 40.10 301.00 301.00 247.00 3633.92 36.34 3670.26 550.54 4220.80

rn - : W.C. pan with ISI marked black solid

Amount

293.00 680.00 1550.00 93.56 27.00 20.14 24.02 40.10 40.10 301.00 301.00 247.00 3616.92 36.17 3653.09 547.96 4201.05

DSR-12

Page 1841 of 2298

40x410x265mm sizes One urinal basin with

Amount

460.00 490.00 440.00 20.14 20.14 20.14 58.11 40.10 264.88 264.88 370.50 2448.89 24.49 2473.38 371.01 2844.39

340x410x265mm sizes - automatic flushing

Amount

920.00 490.00 1010.00 30.22 30.22 30.22 58.11 40.10 451.50 451.50 494.00 4005.87 40.06 4045.93 606.89 4652.82

DSR-12

Page 1842 of 2298

40x410x265mm sizes Range of three urinal

Amount

1380.00 530.00 1240.00 50.17 50.17 50.17 58.11 60.05 602.00 602.00 741.00 5363.67 53.64 5417.31 812.60 6229.91

4 urinal basins with 10 lt PVC cistern

Amount 1840.00 530.00 1800.00 80.19 80.19 80.19 58.11 80.19 903.00 903.00 988.00 7342.87 73.43 7416.30 1112.45

DSR-12

Page 1843 of 2298

8528.75

n etc Single half stall with 5 lt PVC cistern

Amount 1440.00 490.00 240.00 158.00 26.15 40.10 38.74 60.24 526.75 602.00 988.00 4609.98 46.10 4656.08 698.41 5354.49

shing cistern Range of two half stall urinals

Amount

2880.00 490.00 380.00 158.00 26.15 80.19 38.74 80.19 752.50 903.00 1482.00 7270.77

DSR-12

Page 1844 of 2298

72.71 7343.48 1101.52 8445.00

flushing cistern Range of three half stall

Amount

4320.00 530.00 490.00 200.00 26.15 120.29 38.74 100.14 903.00 1053.50 1729.00 9510.82 95.11 9605.93 1440.89 11046.82

hing cistern Range of four half stall urinals

Amount

5760.00 530.00 570.00 200.00 26.15 160.38 58.11

DSR-12

Page 1845 of 2298

120.29 1053.50 1204.00 1976.00 11658.43 116.58 11775.01 1766.25 13541.26

ern Amount 740.00 490.00 170.00 26.15 40.10 38.74 40.10 526.75 225.75 741.00 3038.59 30.39 3068.98 460.35 3529.33

VC cistern Amount 1480.00 490.00 230.00 26.15 80.19 38.74 49.39 752.50 301.00 988.00 4435.97 44.36 4480.33

DSR-12

Page 1846 of 2298

672.05 5152.38

PVC cistern Amount 2220.00 530.00 290.00 26.15 120.29 38.74 62.76 903.00 451.50 1235.00 5877.44 58.77 5936.21 890.43 6826.64

VC cistern Amount 2960.00 365.00 530.00 26.15 160.38 38.74 102.85 1053.50 526.75 1358.50 7121.87 71.22 7193.09 1078.96 8272.05

DSR-12

Page 1847 of 2298

of 15mm CP brass pillar taps

Amount

675.00 340.00 55.00 53.00 24.02 19.95 40.10 20.14 99.33 99.33 165.49 1591.36 15.91 1607.27 241.09 1848.36

sh basin size 630x450 mm with a single 15

Amount 675.00 170.00 55.00 53.00 24.02 19.95 40.10 20.14 90.30 99.33 155.61 1402.45 14.02 1416.47 212.47 1628.94

DSR-12

Page 1848 of 2298

Wash basin size 550x400 mm with a pair of

Amount 530.00 340.00 55.00 53.00 24.02 19.95 40.10 20.14 99.33 99.33 165.49 1446.36 14.46 1460.82 219.12 1679.94

at back wash basin size 550x400 mm with

Amount 530.00 170.00 55.00 53.00 24.02 19.95 40.10 20.14 90.30 99.33 155.61 1257.45 12.57 1270.02 190.50 1460.52

DSR-12

Page 1849 of 2298

5mm CP brass pillar tap

Amount 580.00 170.00 55.00 53.00 24.02 19.95 40.10 20.14 90.30 99.33 155.61 1307.45 13.07 1320.52 198.08 1518.60

5mm CP brass pillar tap

Amount 405.00 170.00 55.00 53.00 24.02 19.95 40.10 20.14 90.30 99.33 155.61 1132.45 11.32 1143.77 171.57 1315.34

DSR-12

Page 1850 of 2298

Amount 425.00 170.00 55.00 53.00 24.02 19.95 40.10 20.14 90.30 99.33 155.61 1152.45 11.52 1163.97 174.60 1338.57

mm Amount 995.00 1200.00 55.00 53.00 24.02 19.95 40.10 20.14 99.33 99.33 165.49 2771.36 27.71 2799.07 419.86 3218.93

DSR-12

Page 1851 of 2298

mm Amount 995.00 600.00 55.00 53.00 24.02 19.95 40.10 20.14 90.30 99.33 155.61 2152.45 21.52 2173.97 326.10 2500.07

llar tap Amount 1690.00 170.00 55.00 53.00 24.02 19.95 40.10 20.14 90.30 99.33 155.61 2417.45 24.17 2441.62 366.24 2807.86

lar tap Amount

DSR-12

Page 1852 of 2298

1470.00 170.00 55.00 53.00 24.02 19.95 40.10 20.14 90.30 99.33 155.61 2197.45 21.97 2219.42 332.91 2552.33

reception of pipes and fittings

Amount 650.00 60.05 60.24 770.29 7.70 777.99 116.70 894.69

. Amount 1350.00 53.00 27.00 62.00 24.02 19.95 40.10 20.14 66.22

DSR-12

Page 1853 of 2298

99.33 138.32 1900.08 19.00 1919.08 287.86 2206.94

h 250mm. Amount

5150.00 106.00 40.29 40.10 20.14 66.22 180.60 202.54 5805.89 58.06 5863.95 879.59 6743.54

sink with drain board 510x1040 mm bowl

Amount

4900.00 106.00 40.29 40.10 20.14 66.22 180.60

DSR-12

Page 1854 of 2298

202.54 5555.89 55.56 5611.45 841.72 6453.17

m Amount 4200.00 106.00 40.29 40.10 20.14 66.22 180.60 202.54 4855.89 48.56 4904.45 735.67 5640.12

Amount 2900.00 106.00 40.29 40.10 20.14 66.22 180.60 202.54 3555.89 35.56 3591.45 538.72 4130.17

DSR-12

Page 1855 of 2298

en sink without drain board 610x510 mm

Amount

2950.00 53.00 20.14 40.10 20.14 66.22 99.33 138.32 3387.25 33.87 3421.12 513.17 3934.29

en sink without drain board 610x460 mm

Amount 2750.00 53.00 20.14 40.10 20.14 66.22 99.33 138.32 3187.25 31.87 3219.12 482.87 3701.99

178MM

DSR-12

Page 1856 of 2298

Amount 2050.00 53.00 20.14 40.10 20.14 66.22 99.33 138.32 2487.25 24.87 2512.12 376.82 2888.94

Amount 820.00 53.00 27.00 62.00 125.00 175.00 24.02 19.95 40.10 20.14 66.22 99.33 138.32 1670.08 16.70 1686.78 253.02 1939.80

Amount

DSR-12

Page 1857 of 2298

1525.00 53.00 27.00 62.00 125.00 175.00 24.02 19.95 40.10 20.14 66.22 99.33 138.32 2375.08 23.75 2398.83 359.82 2758.65

m Amount 525.00 53.00 19.95 38.74 11.62 18.06 51.17 54.34 771.88 7.72 779.60 116.94 896.54

Amount 340.00 19.95

DSR-12

Page 1858 of 2298

20.14 150.50 123.50 654.09 6.54 660.63 99.09 759.72

0x440 mm Amount 750.00 19.95 20.14 150.50 123.50 1064.09 10.64 1074.73 161.21 1235.94

440 mm Amount 1275.00 -750.00 525.00 5.25 530.25 79.54 609.79

Amount 680.00

DSR-12

Page 1859 of 2298

19.95 20.14 150.50 123.50 994.09 9.94 1004.03 150.60 1154.63

of same colour instead of white vitreous

Amount 1080.00 -680.00 1500.00 -890.00 1010.00 10.10 1020.10 153.02 1173.12

Amount

90.00 12.01 18.06 120.07 1.20 121.27 18.19 139.46

DSR-12

Page 1860 of 2298

Amount

100.00 12.01 18.06 130.07 1.30 131.37 19.71 151.08

nforming to IS : 7231, with all fittings and

Amount 640.00

7.75 37.63 30.88 716.26 7.16 723.42 108.51 831.93

nforming to IS : 7231, with all fittings and

Amount 685.00 10.46

37.63 30.88 763.97 7.64 771.61 115.74 887.35

DSR-12

Page 1861 of 2298

h) capacity - white

Amount 975.00 20.14 150.50 123.50 1269.14 12.69 1281.83 192.27 1474.10

h) capacity - coloured

Amount 1400.00 20.14 150.50 123.50 1694.14 16.94 1711.08 256.66 1967.74

at with lid Amount 310.00

19.95 329.95 3.30 333.25 49.99

DSR-12

Page 1862 of 2298

383.24

t with lid Amount 293.00

19.95 312.95 3.13 316.08 47.41 363.49

Coloured (other than black & white) solid

Amount 475.00 19.95 494.95 4.95 499.90 74.99 574.89

Amount 61.00 19.95 80.95 0.81 81.76 12.26 94.02

DSR-12

Page 1863 of 2298

40x410x265mm sizes respectively.

Amount 460.00

14.14 114.38 93.86 682.38 6.82 689.20 103.38 792.58

Amount 740.00 16.08 19.95 150.50 150.50 247.00 1324.03 13.24 1337.27 200.59 1537.86

lat back wash basin of size 630x450mm.

Amount 675.00 80.19 14.14 769.33 7.69 777.02 116.55

DSR-12

Page 1864 of 2298

893.57

Flat back wash basin of size 550x400mm.

Amount 530.00 80.19 14.14 624.33 6.24 630.57 94.59 725.16

Amount 580.00 80.19 14.14 674.33 6.74 681.07 102.16 783.23

Amount 405.00 80.19 14.14 499.33 4.99 504.32 75.65 579.97

DSR-12

Page 1865 of 2298

Amount 425.00 80.19 14.14 519.33 5.19 524.52 78.68 603.20

Amount

995.00 80.19 14.14 1089.33 10.89 1100.22 165.03 1265.25

Flat back wash basin of size 550x400mm.

Amount 1350.00 60.24 16.08 1426.32 14.26 1440.58 216.09 1656.67

DSR-12

Page 1866 of 2298

Size 450x300x150 mm.

Amount

820.00 60.24 16.08 896.32 8.96 905.28 135.79 1041.07

Amount 1525.00 60.24 16.08 1601.32 16.01 1617.33 242.60 1859.93

rigid pipe 32 mm dia

Amount 21.00 30.22 51.22 0.51 51.73 7.76 59.49

DSR-12

Page 1867 of 2298

rigid pipe 40 mm dia

Amount 27.00

30.22 57.22 0.57 57.79 8.67 66.46

ble pipe 32 mm dia

Amount 26.00 30.22 56.22 0.56 56.78 8.52 65.30

ble pipe 40 mm dia

Amount 28.00 30.22 58.22 0.58 58.80 8.82 67.62

DSR-12

Page 1868 of 2298

Amount 15.00 6.20 21.20 0.21 21.41 3.21 24.62

Amount 27.00 2.71 29.71 0.30 30.01 4.50 34.51

ers complete. Amount 290.00 45.90 69.68 A

4.60 6.20 2.13 90.09 81.51 590.11 5.20 595.31 78.84 674.15

DSR-12

Page 1869 of 2298

stic moulded frame of approved make and

Amount 390.00

37.40 20.00 2.30 2.13 6.20 90.09 81.51 629.63 6.30 635.93 95.39 731.32

stic moulded frame of approved make and

Amount 260.00

30.60 40.00 4.60 2.13 6.20 90.09 81.51 515.13 5.15 520.28 78.04 598.32

Amount

DSR-12

Page 1870 of 2298

300.00

28.90 40.00 4.60 2.13 6.20 90.09 81.51 553.43 5.53 558.96 83.84 642.80

cking : Rectangular shape 1500x450 mm

Amount 670.00 125.80 60.00 6.90 2.13 6.20 90.09 81.51 1042.63 10.43 1053.06 157.96 1211.02

Amount 130.00 20.00 7.60 6.20 68.25 61.75 293.80

DSR-12

Page 1871 of 2298

2.94 296.74 44.51 341.25

Amount 115.00 34.84 A 2.30 6.39 32.76 29.64 220.93 1.86 222.79 28.19 250.98

Amount 118.00 34.84 A 6.90 6.39 32.76 29.64 228.53 1.94 230.47 29.34 259.81

DSR-12

Page 1872 of 2298

Amount 10395.00

120.29 80.19 126.42 54.60 205.01 10981.51 109.82 11091.33 1663.70 12755.03

s per IS: 3989. Amount 11865.00

120.29 80.19 126.42 54.60 205.01 12451.51 124.52 12576.03 1886.40 14462.43

Amount 9345.00 120.29 60.17 105.35 44.20

DSR-12

Page 1873 of 2298

172.90 9847.91 98.48 9946.39 1491.96 11438.35

pipe as per IS: 3989.

Amount 10342.50 120.29 60.17 105.35 44.20 172.90 10845.41 108.45 10953.86 1643.08 12596.94

e sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe

Amount

10.27 84.28 69.16 163.71 1.64 165.35 24.80 190.15

ine sand) in S.C.I./ C.I. Pipes : 100 mm dia

DSR-12

Page 1874 of 2298

Amount

12.01 99.33 81.51 192.85 1.93 194.78 29.22 224.00

f cutting holes and making good the walls

Amount 85.00 3.68 37.63 204.75 123.50 10.65 3.47 1.16 0.39 2.46 0.19 8.00 0.12 1.11 0.79 0.36 0.09 0.08 0.05 0.39 0.19 0.19 484.25 4.84 489.09 73.36 562.45

DSR-12

Page 1875 of 2298

f cutting holes and making good the walls

Amount 75.00 3.68 37.63 204.75 123.50 10.65 3.47 1.16 0.39 2.46 0.19 8.00 0.12 1.11 0.79 0.36 0.09 0.08 0.05 0.39 0.19 0.19 474.25 4.74 478.99 71.85 550.84

st iron S&S as per IS - 1729

Amount 233.00 14.00 20.14 267.14 2.67 269.81 40.47 310.28

DSR-12

Page 1876 of 2298

lts and nuts complete. 100 mm Sand cast

Amount 270.00 14.00 20.14 304.14 3.04 307.18 46.08 353.26

s and nuts complete. 75 mm dia Sand cast

Amount 187.00 11.00 16.08 214.08 2.14 216.22 32.43 248.65

s and nuts complete. 75 mm dia Sand cast

Amount 215.00 11.00 16.08 242.08 2.42 244.50 36.68 281.18

DSR-12

Page 1877 of 2298

lts and nuts complete. 100 mm Sand cast

Amount 210.00 20.14 230.14 2.30 232.44 34.87 267.31

Amount 235.00 20.14 255.14 2.55 257.69 38.65 296.34

and nuts complete. 75 mm Sand cast iron

Amount 170.00 16.08 186.08 1.86 187.94 28.19 216.13

Amount 175.00 16.08

DSR-12

Page 1878 of 2298

191.08 1.91 192.99 28.95 221.94

Amount 239.00 20.14 259.14 2.59 261.73 39.26 300.99

Amount 275.00 20.14 295.14 2.95 298.09 44.71 342.80

Amount 200.00 16.08 216.08 2.16 218.24 32.74 250.98

DSR-12

Page 1879 of 2298

Amount 240.00 16.08 256.08 2.56 258.64 38.80 297.44

r 3 mm thick...: 100x100x100x100mm SCI

Amount

530.00 14.00 19.95 563.95 5.64 569.59 85.44 655.03

r 3 mm thick...: 100x100x100x100mm SCI

Amount

610.00 14.00 19.95 643.95 6.44 650.39 97.56 747.95

DSR-12

Page 1880 of 2298

3 mm thick...: 75x75x75x75 mm Sand cast

Amount

395.00 11.00 16.08 422.08 4.22 426.30 63.95 490.25

3 mm thick...: 75x75x75x75 mm Sand cast

Amount

475.00 11.00 16.08 502.08 5.02 507.10 76.07 583.17

IS - 1729 Amount

490.00 20.14 510.14 5.10 515.24 77.29

DSR-12

Page 1881 of 2298

592.53

IS - 3989 Amount

565.00 20.14 585.14 5.85 590.99 88.65 679.64

as per IS - 1729 Amount

335.00 16.08 351.08 3.51 354.59 53.19 407.78

989 Amount

450.00 16.08 466.08 4.66 470.74 70.61

DSR-12

Page 1882 of 2298

541.35

s per IS - 1729 Amount

350.00 20.14 14.00 384.14 3.84 387.98 58.20 446.18

s per IS - 3989 Amount 465.00

20.14 14.00 499.14 4.99 504.13 75.62 579.75

r IS - 1729 Amount

260.00 16.08 11.00 287.08 2.87

DSR-12

Page 1883 of 2298

289.95 43.49 333.44

r IS - 3989 Amount 350.00

16.08 11.00 377.08 3.77 380.85 57.13 437.98

s per IS - 1729 Amount

310.00 20.14 330.14 3.30 333.44 50.02 383.46

s per IS - 3989 Amount 430.00 20.14 450.14 4.50 454.64 68.20 522.84

DSR-12

Page 1884 of 2298

s per IS - 1729 Amount

240.00 16.08 256.08 2.56 258.64 38.80 297.44

r IS - 3989 Amount

310.00 16.08 326.08 3.26 329.34 49.40 378.74

m : SCI S & S as per IS: 1729.

Amount 550.00 14.00 20.14 584.14 5.84 589.98 88.50 678.48

DSR-12

Page 1885 of 2298

m : SCI S & S as per IS: 3989.

Amount 850.00 14.00 20.14 884.14 8.84 892.98 133.95 1026.93

S as per IS: 1729.

Amount 510.00 20.14 530.14 5.30 535.44 80.32 615.76

S as per IS: 1729.

Amount 780.00 20.14 800.14 8.00 808.14 121.22 929.36

DSR-12

Page 1886 of 2298

Amount 390.00 14.00 20.14 424.14 4.24 428.38 64.26 492.64

Amount 630.00 14.00 20.14 664.14 6.64 670.78 100.62 771.40

er IS: 1729. Amount

350.00 20.14 370.14 3.70 373.84 56.08 429.92

er IS: 3989.

DSR-12

Page 1887 of 2298

Amount 560.00 20.14 580.14 5.80 585.94 87.89 673.83

S & S as per IS: 1729.

Amount 510.00 20.14 530.14 5.30 535.44 80.32 615.76

S & S as per IS: 3989.

Amount 525.00 20.14 545.14 5.45 550.59 82.59 633.18

as per IS: 1729. Amount 382.00 16.08

DSR-12

Page 1888 of 2298

398.08 3.98 402.06 60.31 462.37

as per IS: 3989. Amount 405.00 16.08 421.08 4.21 425.29 63.79 489.08

s per IS: 1729. Amount 387.00 20.14 407.14 4.07 411.21 61.68 472.89

s per IS: 3989. Amount 395.00 20.14 415.14 4.15 419.29 62.89 482.18

DSR-12

Page 1889 of 2298

r IS: 1729. Amount 290.00 16.08 306.08 3.06 309.14 46.37 355.51

r IS: 3989. Amount 303.00 16.08 319.08 3.19 322.27 48.34 370.61

as per IS: 3989. Amount 545.00 20.14 565.14 5.65 570.79 85.62 656.41

as per IS: 3989. Amount

DSR-12

Page 1890 of 2298

700.00 20.14 720.14 7.20 727.34 109.10 836.44

as per IS: 1729. Amount 466.00 20.14 486.14 4.86 491.00 73.65 564.65

as per IS: 3989. Amount 505.00 20.14 525.14 5.25 530.39 79.56 609.95

Amount 215.00 16.08 231.08 2.31 233.39 35.01 268.40

DSR-12

Page 1891 of 2298

Amount 246.00 16.08 262.08 2.62 264.70 39.71 304.41

Amount 270.00 20.14 290.14 2.90 293.04 43.96 337.00

Amount 355.00 20.14 375.14 3.75 378.89 56.83 435.72

Amount

DSR-12

Page 1892 of 2298

335.00 26.73 361.73 3.62 365.35 54.80 420.15

Amount 440.00 26.73 466.73 4.67 471.40 70.71 542.11

Amount 215.00 16.08 231.08 2.31 233.39 35.01 268.40

Amount 270.00 24.02 294.02 2.94 296.96 44.54 341.50

DSR-12

Page 1893 of 2298

Amount 370.00 24.02 394.02 3.94 397.96 59.69 457.65

SCI S & S as per IS: 1729.

Amount 350.00 14.00 20.14 384.14 3.84 387.98 58.20 446.18

SCI S & S as per IS: 3989.

Amount 370.00 14.00 20.14 404.14 4.04 408.18 61.23 469.41

DSR-12

Page 1894 of 2298

CI S & S as per IS: 1729.

Amount 253.00 11.00 16.08 280.08 2.80 282.88 42.43 325.31

CI S & S as per IS: 1729.

Amount 260.00 11.00 16.08 287.08 2.87 289.95 43.49 333.44

Amount

187.00 20.14 207.14 2.07 209.21 31.38 240.59

DSR-12

Page 1895 of 2298

Amount

190.00 20.14 210.14 2.10 212.24 31.84 244.08

Amount

137.00 16.08 153.08 1.53 154.61 23.19 177.80

Amount

175.00 16.08 191.08 1.91 192.99 28.95 221.94

DSR-12

Page 1896 of 2298

Amount 133.00 20.14 153.14 1.53 154.67 23.20 177.87

Amount 185.00 20.14 205.14 2.05 207.19 31.08 238.27

Amount 98.00 16.08 114.08 1.14 115.22 17.28 132.50

Amount 130.00 16.08 146.08 1.46 147.54 22.13

DSR-12

Page 1897 of 2298

169.67

ngs of diameter: 100 mm

Amount 88.20 4.40 20.14 2.13 18.06 16.38 29.64 178.95 1.79 180.74 27.11 207.85

ngs of diameter: 75 mm

Amount

79.20 3.60 16.08 2.13 15.05 13.65 22.23 151.94 1.52 153.46 23.02 176.48

ngs of diameter: 50 mm

DSR-12

Page 1898 of 2298

Amount

69.30 2.40 10.07 2.13 12.04 13.65 12.35 121.94 1.22 123.16 18.47 141.63

m Amount

33.00 20.14 53.14 0.53 53.67 8.05 61.72

Amount

29.00 16.08 45.08 0.45 45.53 6.83 52.36

DSR-12

Page 1899 of 2298

Amount

25.00 14.14 39.14 0.39 39.53 5.93 45.46

Amount 392.00 20.14 4.07 150.50 123.50 690.21 6.90 697.11 104.57 801.68

Amount 263.00 20.14 4.07 150.50 123.50 561.21 5.61 566.82 85.02 651.84

DSR-12

Page 1900 of 2298

vent arm complete... 100 mm inlet and 75

Amount

424.00 20.14 4.07 150.50 123.50 722.21 7.22 729.43 109.41 838.84

vent arm complete... 100 mm inlet and 75

Amount 198.00 20.14 4.07 150.50 123.50 496.21 4.96 501.17 75.18 576.35

pes 100 mm dia.

Amount

DSR-12

Page 1901 of 2298

105.21 A 15.50 6.20 42.14 66.69 235.74 1.31 237.05 19.78 256.83

pes 75 mm dia. Amount

71.74 A 11.62 5.23 30.10 49.40 168.09 0.96 169.05 14.60 183.65

pes 50 mm dia. Amount

38.26 A 7.75 4.07 21.07 34.58 105.73 0.67 106.40 10.22 116.62

DSR-12

Page 1902 of 2298

Amount

19.55 13.60 54.00 2.13 10.07 68.25 123.50 291.10 2.91 294.01 44.10 338.11

Amount

19.55 27.00 30.80 10.65 54.60 61.75 204.35 2.04 206.39 30.96 237.35

Amount 27.00

DSR-12

Page 1903 of 2298

5.42 24.57 29.64 86.63 0.87 87.50 13.13 100.63

grey, or buff etc. over a coat of primer (of

Amount

71.69 A

186.39 B 25.57 283.65 0.26 283.91 3.87 287.78

a coat of primer for new work : 75mm dia

Amount

53.87 A 140.06 B 22.66 216.59 0.23 216.82 3.43 220.25

DSR-12

Page 1904 of 2298

any colour such as chocolate, grey or buff

Amount

121.76 A 18.21 139.97 0.18 140.15 2.76 142.91

any colour such as chocolate, grey or buff

Amount

90.68 A 14.14 104.82 0.14 104.96 2.14 107.10

Amount 112.50 10.07 68.25 61.75 252.57 2.53 255.10 38.27 293.37

DSR-12

Page 1905 of 2298

type water closet (Anglo Indian WC pan) :

Amount 310.00 1250.00 1550.00 411.61 27.00 88.13 106.92 176.46 176.46 301.00 301.00 247.00 4945.58 49.46 4995.04 749.26 5744.30

ngth and 62mm breadth wei- ghing not less

Amount 51.00 30.22 81.22 0.81 82.03 12.30 94.33

aste coupling 38mm of 83mm length and

DSR-12

Page 1906 of 2298

Amount

64.00 30.22 94.22 0.94 95.16 14.27 109.43

ttle trap 31mm single piece moulded with

Amount

317.00 30.22 347.22 3.47 350.69 52.60 403.29

ttle trap 38mm single piece moulded with

Amount

345.00 30.22 375.22 3.75 378.97 56.85 435.82

wall of standard shape with bracket of the

DSR-12

Page 1907 of 2298

Amount

145.00 10.07 155.07 1.55 156.62 23.49 180.11

distances of 37mm from wall face with

Amount

116.00 30.22 146.22 1.46 147.68 22.15 169.83

quality and colour. 450MM long towel rail -

Amount 192.00 34.84 A 6.90 6.20 46.41 41.99 328.34 2.94 331.28 44.47 375.75

DSR-12

Page 1908 of 2298

Amount 226.00 34.84 A 6.90 6.20 46.41 41.99 362.34 3.28 365.62 49.62 415.24

0gm Amount 258.00 34.84 A 6.90 6.20 46.41 41.99 394.34 3.60 397.94 54.47 452.41

eighing not less than 60 grams.

Amount 127.00 10.07 137.07 1.37 138.44

DSR-12

Page 1909 of 2298

20.77 159.21

female threads weighing not less than 48

Amount 94.00 12.01 106.01 1.06 107.07 16.06 123.13

mm flat of specified shape: Total bracket

Amount

291.55 0.54 9.93 13.38 16.06

11.62 A

2.01

441.20 B 786.29 3.33 789.62 50.52 840.14

DSR-12

Page 1910 of 2298

mm flat of specified shape: Total bracket

Amount

427.55 0.79 14.45 19.66 23.71

18.34 A 2.95

441.20 B 948.65 4.89 953.54 74.10 1027.64

mm flat of specified shape: Total bracket

Amount

DSR-12

Page 1911 of 2298

563.55 1.04 18.96 25.94 31.12

25.06 A 3.87

441.20 B 1110.74 6.44 1117.18 97.64 1214.82

nd white vitreous china cistern - capacity 3

Amount 4548.00 2409.60 310.00 14.59 301.00 247.00 301.00 8131.19 81.31 8212.50 1231.88 9444.38

ial /germs free ceramic surface, fixed with

Amount 13208.00

DSR-12

Page 1912 of 2298

3029.60 14.59 150.50 123.50 16526.19 165.26 16691.45 2503.72 19195.17

610 x 390 x 370 mm having pre & post

Amount 12592.75 14.59 150.50 123.50 12881.34 128.81 13010.15 1951.52 14961.67

ng all special fittings of composite material

Amount 900.00 270.00 4.07 99.33 180.18 163.02 1616.60 16.17 1632.77 244.92 1877.69

DSR-12

Page 1913 of 2298

terial . with clamps (Internal work exposed

Amount

1443.00 4.07 99.33 223.86 163.02 1933.28 19.33 1952.61 292.89 2245.50

terial . with clamps (Internal work exposed

Amount 1859.00 4.07 99.33 267.54 163.02 2392.96 23.93 2416.89 362.53 2779.42

terial . with clamps (Internal work exposed

Amount 2509.00 6.20 99.33 267.54

DSR-12

Page 1914 of 2298

242.06 3124.13 31.24 3155.37 473.31 3628.68

terial . with clamps (Internal work exposed

Amount 4030.00 7.94 99.33 357.63 323.57 4818.47 48.18 4866.65 730.00 5596.65

terial . with clamps (Internal work exposed

Amount 4355.00 7.94 99.33 357.63 323.57 5143.47 51.43 5194.90 779.24 5974.14

d on wall): (concealed work ) 1620 (20 mm

DSR-12

Page 1915 of 2298

Amount 1575.00

644.90 A

99.33 180.18 163.02 2662.43 20.18 2682.61 305.66 2988.27

d on wall): (concealed work ) 1620 (20 mm

Amount 1942.50

644.90 A

99.33 180.18 163.02 3029.93 23.85 3053.78 361.33 3415.11

d on wall): (concealed work ) 2025 (25 mm

Amount 2502.50

DSR-12

Page 1916 of 2298

644.90 A

99.33 180.18 163.02 3589.93 29.45 3619.38 446.17 4065.55

d on wall): (concealed work ) 2532 (32 mm

Amount 3377.50

644.90 A

99.33 180.18 163.02 4464.93 38.20 4503.13 578.73 5081.86

216 (16 mm O/D) pipe.

Amount 1170.00

24.08 39.52 163.02 163.02 1559.64 15.60 1575.24 236.29

DSR-12

Page 1917 of 2298

1811.53

620 (20 mm O/D) pipe.

Amount 1443.00

24.08 39.52 163.02 163.02 1832.64 18.33 1850.97 277.65 2128.62

025 (25 mm O/D) pipe.

Amount 1859.00

24.08 39.52 163.02 163.02 2248.64 22.49 2271.13 340.67 2611.80

532 (32 mm O/D) pipe.

Amount

DSR-12

Page 1918 of 2298

2509.00

24.08 39.52 163.02 163.02 2898.64 28.99 2927.63 439.14 3366.77

240 (40 mm O/D) pipe.

Amount 4030.00

48.16 81.51 163.02 163.02 4485.71 44.86 4530.57 679.59 5210.16

050 (50 mm O/D) pipe.

Amount 4355.00

48.16 81.51 163.02 163.02 4810.71 48.11 4858.82

DSR-12

Page 1919 of 2298

728.82 5587.64

s threaded polypropylene random fittings,

Amount 416.00 4.07 99.33 180.18 163.02 862.60 8.63 871.23 130.68 1001.91

s threaded polypropylene random fittings,

Amount 650.00 4.07 99.33 223.86 163.02 1140.28 11.40 1151.68 172.75 1324.43

s threaded polypropylene random fittings,

DSR-12

Page 1920 of 2298

Amount 988.00 4.07 99.33 267.54 163.02 1521.96 15.22 1537.18 230.58 1767.76

s threaded polypropylene random fittings,

Amount 1612.00 6.20 99.33 267.54 242.06 2227.13 22.27 2249.40 337.41 2586.81

s threaded polypropylene random fittings,

Amount 2548.00 7.94 99.33 357.63 323.57 3336.47 33.36 3369.83

DSR-12

Page 1921 of 2298

505.47 3875.30

s threaded polypropylene random fittings,

Amount 3718.00 7.94 99.33 357.63 323.57 4506.47 45.06 4551.53 682.73 5234.26

s threaded polypropylene random fittings,

Amount 560.00

644.90 A

99.33 180.18 163.02 1647.43 10.03 1657.46 151.88 1809.34

s threaded polypropylene random fittings,

DSR-12

Page 1922 of 2298

Amount 875.00

644.90 A

99.33 180.18 163.02 1962.43 13.18 1975.61 199.61 2175.22

s threaded polypropylene random fittings,

Amount 1330.00

644.90 A

99.33 180.18 163.02 2417.43 17.73 2435.16 268.54 2703.70

anti-microbial fusion welded, i/c all PP- R cutting chases and making the same.:

Amount 2170.00

DSR-12

Page 1923 of 2298

644.90 A

99.33 180.18 163.02 3257.43 26.13 3283.56 395.80 3679.36

o- bial fusion welded, i/c all PP-R plain and rnal work): PN - 16 Pipe, 15 mm O

Amount 416.00

24.08 39.52 163.02 163.02 805.64 8.06 813.70 122.06 935.76

trenching refilling (External work): PN - 16

Amount 650.00

24.08 39.52 163.02 163.02 1039.64 10.40

DSR-12

Page 1924 of 2298

1050.04 157.51 1207.55

ng trenching refilling (External work): PN -

Amount 988.00

36.12 61.75 163.02 163.02 1411.91 14.12 1426.03 213.90 1639.93

trenching refilling (External work): PN - 16

Amount 1612.00

36.12 61.75 163.02 163.02 2035.91 20.36 2056.27 308.44 2364.71

ng trenching refilling (External work): PN -

DSR-12

Page 1925 of 2298

Amount 2548.00

48.16 81.51 163.02 163.02 3003.71 30.04 3033.75 455.06 3488.81

ng trenching refilling (External work): PN -

Amount 3718.00

48.16 81.51 163.02 163.02 4173.71 41.74 4215.45 632.32 4847.77

ng trenching refilling (External work): PN -

Amount 5785.00

75.25 163.02 163.02 163.02 6349.31 63.49

DSR-12

Page 1926 of 2298

6412.80 961.92 7374.72

o- bial fusion welded, i/c all PP-R plain and rnal work): PN - 16 Pipe, 75 mm O

Amount 8320.00

75.25 163.02 163.02 163.02 8884.31 88.84 8973.15 1345.97 10319.12

ng trenching refilling (External work): PN -

Amount 13260.00

111.37 239.59 197.60 197.60 14006.16 140.06 14146.22 2121.93 16268.15

DSR-12

Page 1927 of 2298

ng trenching refilling (External work): PN -

Amount 13910.00

111.37 239.59 197.60 197.60 14656.16 146.56 14802.72 2220.41 17023.13

o- bial fusion welded, i/c all PP-R plain and rnal work): PN - 10 Pipe, 160 mm

Amount 29315.00

174.58 380.38 296.40 296.40 30462.76 304.63 30767.39 4615.11 35382.50

C plain & brass threaded fittings... 15 mm

Amount 663.00

4.07

DSR-12

Page 1928 of 2298

99.33 223.86 163.02 1153.28 11.53 1164.81 174.72 1339.53

C plain & brass threaded fittings... 20 mm

Amount 819.00

4.07 99.33 267.54 163.02 1352.96 13.53 1366.49 204.97 1571.46

C plain & brass threaded fittings... 25 mm

Amount 1170.00

4.07 99.33 267.54 163.02 1703.96 17.04 1721.00 258.15 1979.15

DSR-12

Page 1929 of 2298

C plain & brass threaded fittings... 32 mm

Amount 1560.00 6.20 99.33 267.54 242.06 2175.13 21.75 2196.88 329.53 2526.41

C plain & brass threaded fittings... 40 mm

Amount 2210.00 7.94 99.33 357.63 323.57 2998.47 29.98 3028.45 454.27 3482.72

C plain & brass threaded fittings... 50 mm

Amount

3640.00 7.94 99.33

DSR-12

Page 1930 of 2298

357.63 323.57 4428.47 44.28 4472.75 670.91 5143.66

C plain & brass threaded fittings... 15 mm

Amount 892.50

644.90 A

99.33 180.18 163.02 1979.93 13.35 1993.28 202.26 2195.54

C plain & brass threaded fittings... 20 mm

Amount 1102.50

644.90 A

99.33 180.18 163.02 2189.93 15.45 2205.38 234.07 2439.45

DSR-12

Page 1931 of 2298

C plain & brass threaded fittings... 25 mm

Amount 1575.00

644.90 A

99.33 180.18 163.02 2662.43 20.18 2682.61 305.66 2988.27

C plain & brass threaded fittings... 32 mm

Amount 2100.00

644.90 A

99.33 180.18 163.02 3187.43 25.43 3212.86 385.19 3598.05

plain & brass threaded fittings... External

DSR-12

Page 1932 of 2298

Amount 663.00

24.08 39.52 163.02 163.02 1052.64 10.53 1063.17 159.48 1222.65

plain & brass threaded fittings... External

Amount

819.00 24.08

39.52 163.02

163.02 1208.64 12.09 1220.73 183.11 1403.84

plain & brass threaded fittings... External

Amount 1170.00

36.12 61.75 163.02

DSR-12

Page 1933 of 2298

163.02 1593.91 15.94 1609.85 241.48 1851.33

plain & brass threaded fittings... External

Amount 1560.00

36.12 61.75 163.02 163.02 1983.91 19.84 2003.75 300.56 2304.31

plain & brass threaded fittings... External

Amount 2210.00

48.16 81.51 163.02 163.02 2665.71 26.66 2692.37 403.86 3096.23

DSR-12

Page 1934 of 2298

plain & brass threaded fittings... External

Amount 3640.00

48.16 81.51 163.02 163.02 4095.71 40.96 4136.67 620.50 4757.17

plain & brass threaded fittings... External

Amount 10855.00

75.25 163.02 163.02 163.02 11419.31 114.19 11533.50 1730.03 13263.53

n & brass threaded fittings i/c trenching,

Amount 15405.00

75.25 163.02

DSR-12

Page 1935 of 2298

163.02 163.02 15969.31 159.69 16129.00 2419.35 18548.35

n & brass threaded fittings i/c trenching,

Amount 21320.00

111.37 239.59 197.60 197.60 22066.16 220.66 22286.82 3343.02 25629.84

n & brass threaded fittings i/c trenching,

Amount 37310.00

174.58 380.38 296.40 296.40 38457.76 384.58 38842.34 5826.35 44668.69

DSR-12

Page 1936 of 2298

nominal bore Amount 931.50 1.10

12.01 4.07 99.33 180.18 163.02 1391.21 13.91 1405.12 210.77 1615.89

nominal bore Amount 1115.50 1.43

12.01 4.07 99.33 223.86 163.02 1619.22 16.19 1635.41 245.31 1880.72

DSR-12

Page 1937 of 2298

nominal bore Amount 1541.00 2.20

14.14 6.20 99.33 267.54 163.02 2093.43 20.93 2114.36 317.15 2431.51

nominal bore Amount 1920.50 2.84

14.14 6.20 99.33 267.54 242.06 2552.61 25.53 2578.14 386.72 2964.86

nominal bore Amount

DSR-12

Page 1938 of 2298

2323.00 3.27

20.14 7.94 99.33 357.63 323.57 3134.88 31.35 3166.23 474.93 3641.16

nominal bore Amount 2921.00 4.63

20.14 7.94 99.33 447.72 405.08 3905.84 39.06 3944.90 591.74 4536.64

d making good the wall 15 mm dia nominal

Amount 931.50 1.10

DSR-12

Page 1939 of 2298

12.01

43.90 A

644.90 B

99.33 180.18 163.02 2075.94 13.87 2089.81 210.15 2299.96

d making good the wall 20 mm dia nominal

Amount 1115.50 1.10 12.01

51.60 A

644.90 B

99.33 180.18 163.02 2267.64 15.71 2283.35 238.03 2521.38

k 15 mm dia. nominal bore

Amount

DSR-12

Page 1940 of 2298

826.20 0.97

7.94 24.08 39.52

163.02 163.02 1224.75 12.25 1237.00 185.55 1422.55

k 20 mm dia. nominal bore

Amount 989.40 1.26

7.94 24.08 39.52

163.02 163.02 1388.24 13.88 1402.12 210.32 1612.44

k 25 mm dia. nominal bore

DSR-12

Page 1941 of 2298

Amount 1366.80 1.95

10.07 36.12 61.75

163.02 163.02 1802.73 18.03 1820.76 273.11 2093.87

k 32 mm dia. nominal bore

Amount 1703.40 2.52

10.07 36.12 61.75

163.02 163.02 2139.90 21.40 2161.30 324.20 2485.50

DSR-12

Page 1942 of 2298

dia. nominal bore

Amount 2060.40 2.90

14.14

48.16 81.51

163.02 163.02 2533.15 25.33 2558.48 383.77 2942.25

k 50mm dia. nominal bore

Amount 2590.80 4.10

14.14 48.16 81.51

163.02 163.02 3064.75 30.65 3095.40 464.31 3559.71

DSR-12

Page 1943 of 2298

k 65mm dia. nominal bore

Amount 3315.00 5.26

20.14 75.25 163.02

163.02 163.02 3904.71 39.05 3943.76 591.56 4535.32

k 80mm dia. nominal bore

Amount 4345.20 6.86

20.14 75.25 163.02

163.02 163.02 4936.51 49.37 4985.88 747.88 5733.76

DSR-12

Page 1944 of 2298

Amount 42.00 8.00 7.94 99.33 81.51 238.78 2.39 241.17 36.18 277.35

Amount 270.00 18.00 7.94 135.45 111.15 542.54 5.43 547.97 82.20 630.17

op cock to be paid separately).

Amount 8.00 7.94 99.33 81.51 196.78 1.97 198.75

DSR-12

Page 1945 of 2298

29.81 228.56

Amount 165.00 12.01 177.01 1.77 178.78 26.82 205.60

Amount

215.00 14.14 229.14 2.29 231.43 34.71 266.14

Amount 165.00 12.01 177.01 1.77 178.78 26.82 205.60

DSR-12

Page 1946 of 2298

Amount 215.00 14.59 229.59 2.30 231.89 34.78 266.67

Amount 305.00 16.08 321.08 3.21 324.29 48.64 372.93

Amount 370.00 18.21 388.21 3.88 392.09 58.81 450.90

Amount 450.00 20.14 470.14 4.70 474.84 71.23 546.07

DSR-12

Page 1947 of 2298

Amount 650.00 22.08 672.08 6.72 678.80 101.82 780.62

Amount 900.00 24.02 924.02 9.24 933.26 139.99 1073.25

Amount 1550.00 28.09 1578.09 15.78 1593.87 239.08 1832.95

bore Amount 190.00 32.15

DSR-12

Page 1948 of 2298

222.15 2.22 224.37 33.66 258.03

bore Amount 270.00 40.10 310.10 3.10 313.20 46.98 360.18

bore Amount 315.00 48.04 363.04 3.63 366.67 55.00 421.67

Amount

310.00 20.14 330.14 3.30 333.44 50.02 383.46

DSR-12

Page 1949 of 2298

Amount 320.00 20.14 340.14 3.40 343.54 51.53 395.07

Amount

400.00 22.08 422.08 4.22 426.30 63.95 490.25

Amount

490.00 22.08 512.08 5.12 517.20 77.58 594.78

DSR-12

Page 1950 of 2298

Amount

510.00 24.02 534.02 5.34 539.36 80.90 620.26

Amount

680.00 24.02 704.02 7.04 711.06 106.66 817.72

Amount

780.00 26.15 806.15 8.06 814.21 122.13 936.34

DSR-12

Page 1951 of 2298

Amount

930.00 26.15 956.15 9.56 965.71 144.86 1110.57

Amount 1420.00 28.09 1448.09 14.48 1462.57 219.39 1681.96

Amount 1650.00 28.09 1678.09 16.78 1694.87 254.23 1949.10

Amount 2030.00 30.22

DSR-12

Page 1952 of 2298

2060.22 20.60 2080.82 312.12 2392.94

Amount 2630.00 30.22 2660.22 26.60 2686.82 403.02 3089.84

Amount 115.00 60.05 175.05 1.75 176.80 26.52 203.32

Amount 145.00 70.31 215.31 2.15 217.46 32.62 250.08

DSR-12

Page 1953 of 2298

Amount 205.00 80.19 285.19 2.85 288.04 43.21 331.25

re Amount

26.00 18.21 44.21 0.44 44.65 6.70 51.35

re Amount

33.00 18.21 51.21 0.51 51.72 7.76 59.48

ore _x000D_

DSR-12

Page 1954 of 2298

Amount 33.00 20.14 53.14 0.53 53.67 8.05 61.72

re Amount

43.00 20.14 63.14 0.63 63.77 9.57 73.34

Amount 40.00 10.07 50.07 0.50 50.57 7.59 58.16

Amount

55.00

DSR-12

Page 1955 of 2298

12.01 67.01 0.67 67.68 10.15 77.83

Amount

51.17 46.41 328.51 24.02 450.11 4.50 454.61 68.19 522.80

Amount

279.93 169.26 612.56 59.85 1121.60 11.22 1132.82 169.92 1302.74

- Upto 300 mm dia.

Amount 3450.00

DSR-12

Page 1956 of 2298

7.77 186.11 A 3643.88 34.58 3678.46 523.85 4202.31

- Over 300 mm dia.

Amount 3550.00 7.77 186.11 A 3743.88 35.58 3779.46 539.00 4318.46

mm dia. Amount 5300.00 7.77 186.11 A 5493.88 53.08 5546.96 804.13 6351.09

mm dia. Amount

DSR-12

Page 1957 of 2298

5600.00 7.77 186.11 A 5793.88 56.08 5849.96 849.58 6699.54

Amount

8300.00 19.15 201.39 A 8520.54 83.19 8603.73 1260.35 9864.08

Amount

10400.00 25.68 262.41 A 10688.09 104.26 10792.35 1579.49 12371.84

DSR-12

Page 1958 of 2298

Amount

12400.00 31.91 327.51 A 12759.42 124.32 12883.74 1883.43 14767.17

Amount

21200.00 51.91 479.05 A 21730.96 212.52 21943.48 3219.66 25163.14

Amount

28300.00 73.77 645.86 A

DSR-12

Page 1959 of 2298

29019.63 283.74 29303.37 4298.63 33602.00

Amount

37400.00 91.18 831.99 A 38323.17 374.91 38698.08 5679.91 44377.99

Amount

45000.00 127.65 1048.63 A 46176.28 451.28 46627.56 6836.84 53464.40

Amount

DSR-12

Page 1960 of 2298

58700.00 174.07 1276.46 A 60150.53 588.74 60739.27 8919.42 69658.69

Amount

71000.00 212.75 1538.87 A 72751.62 712.13 73463.75 10788.73 84252.48

Amount

82500.00 212.75 1801.28 A 84514.03 827.13 85341.16 12530.98 97872.14

DSR-12

Page 1961 of 2298

Amount

114500.00 319.13 2400.36 A 117219.49 1148.19 118367.68 17395.10 135762.78

100 mm diameter pipe.

Amount

68.00 126.00 11.40 10.07 7.94 301.00 273.00 494.00 1291.41 12.91 1304.32 195.65 1499.97

125 mm diameter pipe.

Amount

DSR-12

Page 1962 of 2298

80.00 166.50 22.80 14.14 14.14 451.50 409.50 741.00 1899.58 19.00 1918.58 287.79 2206.37

150 mm diameter pipe.

Amount

92.00 189.00 22.80 16.08 16.08 451.50 409.50 741.00 1937.96 19.38 1957.34 293.60 2250.94

Amount

120.00 252.00 22.80 20.14 20.14 602.00 546.00

DSR-12

Page 1963 of 2298

988.00 2571.08 25.71 2596.79 389.52 2986.31

250 mm diameter pipe.

Amount

160.00 292.50 34.20 26.15 26.15 752.50 682.50 1235.00 3209.00 32.09 3241.09 486.16 3727.25

300 mm diameter pipe.

Amount

216.00 337.50 45.60 30.22 30.22 903.00 819.00 1482.00 3863.54 38.64 3902.18 585.33 4487.51

DSR-12

Page 1964 of 2298

350 mm diameter pipe.

Amount

248.00 418.50 51.00 36.03 36.03 903.00 819.00 1482.00 3993.56 39.94 4033.50 605.03 4638.53

400 mm diameter pipe.

Amount

296.00 504.00 51.00 40.10 40.10 1204.00 1092.00 1976.00 5203.20 52.03 5255.23 788.28 6043.51

450 mm diameter pipe.

Amount

DSR-12

Page 1965 of 2298

316.00 544.50 68.10 46.29 46.29 1354.50 1228.50 2223.00 5827.18 58.27 5885.45 882.82 6768.27

500 mm diameter pipe.

Amount

340.00 589.50 68.10 50.17 50.17 1429.75 1296.75 2346.50 6170.94 61.71 6232.65 934.90 7167.55

600 mm diameter pipe.

Amount

408.00 756.00 85.20 60.05 60.05

DSR-12

Page 1966 of 2298

1956.50 1774.50 3211.00 8311.30 83.11 8394.41 1259.16 9653.57

Amount 9000.00 7.79 9007.79 90.08 9097.87 1364.68 10462.55

Amount

110.00 400.00 4.07 45.15 40.95 197.60 797.77 7.98 805.75 120.86 926.61

Amount

140.00 800.00

DSR-12

Page 1967 of 2298

6.20 75.25 68.25 247.00 1336.70 13.37 1350.07 202.51 1552.58

Amount

150.00 880.00 6.20 75.25 68.25 247.00 1426.70 14.27 1440.97 216.15 1657.12

Amount

170.00 1040.00 6.20 90.30 81.90 271.70 1660.10 16.60 1676.70 251.51 1928.21

DSR-12

Page 1968 of 2298

Amount

220.00 1040.00 6.20 90.30 81.90 271.70 1710.10 17.10 1727.20 259.08 1986.28

Amount

320.00 1680.00 7.94 120.40 109.20 321.10 2558.64 25.59 2584.23 387.63 2971.86

Amount

400.00 1680.00 7.94 120.40 109.20 321.10

DSR-12

Page 1969 of 2298

2638.64 26.39 2665.03 399.75 3064.78

Amount

450.00 2400.00 7.94 150.50 136.50 370.50 3515.44 35.15 3550.59 532.59 4083.18

Amount

670.00 4320.00 12.01 150.50 136.50 370.50 5659.51 56.60 5716.11 857.42 6573.53

Amount

DSR-12

Page 1970 of 2298

840.00 5400.00 12.01 180.60 163.80 419.90 7016.31 70.16 7086.47 1062.97 8149.44

Amount

1060.00 5800.00 12.01 195.65 177.45 444.60 7689.71 76.90 7766.61 1164.99 8931.60

Amount

1180.00 7000.00 14.14 225.75 204.75 494.00 9118.64 91.19 9209.83 1381.47 10591.30

DSR-12

Page 1971 of 2298

meter : Class I. Amount

23000.00 34.17 824.47 A

3105.20 B 26963.84 230.34 27194.18 3489.68 30683.86

meter : Class II.

Amount

26500.00 43.50 1047.80 A

3105.20 B 30696.50 265.44 30961.94 4021.34 34983.28

meter : Class I.

DSR-12

Page 1972 of 2298

Amount

26000.00 43.50 1047.80 A

3314.20 B 30405.50 260.44 30665.94 3945.59 34611.53

meter : Class II.

Amount

32000.00 52.82

1271.13 A

3314.20 B 36638.15 320.53 36958.68 4856.00 41814.68

meter : Class I. Amount

34100.00 55.92

DSR-12

Page 1973 of 2298

1349.30 A

3856.40 B 39361.62 341.56 39703.18 5174.62 44877.80

meter : Class II.

Amount

40000.00 67.18 1609.85 A

3856.40 B 45533.43 400.67 45934.10 6070.18 52004.28

meter : Class I. Amount

65500.00 94.76 2261.24 A

3972.60 B

DSR-12

Page 1974 of 2298

71828.60 655.95 72484.55 9937.61 82422.16

meter : Class II.

Amount

91000.00 116.51 2800.96 A

3972.60 B 97890.07 911.17 98801.24 13804.15 112605.39

meter : Class I. Amount

95500.00 139.81 3348.12 A

5943.80 B 104931.73 956.40 105888.13 14489.43 120377.56

DSR-12

Page 1975 of 2298

meter : Class II.

Amount

135000.00 178.64 4278.67 A

5943.80 B 145401.11 1351.79 146752.90 20479.56 167232.46

meter : Class I. Amount

135000.00 187.96 4511.31 A

6129.60 B 145828.87 1351.88 147180.75 20480.98 167661.73

meter : Class II.

DSR-12

Page 1976 of 2298

Amount

170000.00 235.65 5646.58 A

6129.60 B 182011.83 1702.36 183714.19 25790.70 209504.89

x :- With F.P.S. bricks.

Amount

39.23 A 25.14 B

123.50 C

350.83 D

121.16 E 100.00 2.13

DSR-12

Page 1977 of 2298

109.89 F -9.39 6.20 868.69 0.99 869.68 14.99 884.67

x :- With non modular bricks

Amount

190.94 A 122.35 B

463.12 C

1999.70 D

373.87 E 185.00 12.01

934.07 F

-79.04

DSR-12

Page 1978 of 2298

749.36 G

267.65 H 12.01 5231.04 1.30 5232.34 19.69 5252.03

e box :- With common burnt non-modular

Amount

372.72 A 238.83 B

710.12 C

3648.58 D

763.33 E 185.00 12.01

1483.53 F

DSR-12

Page 1979 of 2298

-125.97

1244.40 G

463.72 H 12.01 9008.28 0.83 9009.11 12.58 9021.69

box :- With F.P.S. bricks.

Amount

536.20 A 343.58 B

1018.87 C

4630.89 D

1111.24 E 185.00 12.01

DSR-12

Page 1980 of 2298

2252.77 F

-190.19

1862.06 G

715.81 H 12.01 12490.25 0.19 12490.44 2.85 12493.29

box :- With common burnt non-modular

Amount

190.94 A 122.35 B

463.12 C

1999.70 D

373.87 E 185.00 80.19

DSR-12

Page 1981 of 2298

714.29 F

-59.28

594.95 G

267.65 H 12.01 4944.79 2.18 4946.97 33.02 4979.99

surface box :- With common burnt non-

Amount

142.55 A 91.34 B

401.37 C

1227.89 D

228.48 E

DSR-12

Page 1982 of 2298

205.00 20.14

1208.80 F

-101.27

1012.78 G

320.56 H 12.01 4769.65 1.36 4771.01 20.59 4791.60

ing coat, : 15 mm diameter pipe.

Amount

13.94 A

36.25 B 20.14 70.33 0.20 70.53 3.05 73.58

DSR-12

Page 1983 of 2298

ing coat, : 20 mm diameter pipe.

Amount

17.51 A 45.52 B

20.14 83.17 0.20 83.37 3.05 86.42

ing coat, : 25 mm diameter pipe.

Amount

21.98 A 57.16 B

30.22 109.36 0.30 109.66 4.58 114.24

ing coat, : 32 mm diameter pipe.

Amount

DSR-12

Page 1984 of 2298

27.64 A 71.86 B

30.22 129.72 0.30 130.02 4.58 134.60

ing coat, : 40 mm diameter pipe.

Amount

31.49 A 81.88 B

40.10 153.47 0.40 153.87 6.08 159.95

ing coat, : 50mm diameter pipe.

Amount

39.24 A 102.03 B

40.10 181.37 0.40 181.77 6.08 187.85

DSR-12

Page 1985 of 2298

15 mm diameter pipe.

Amount 23.68 A 12.01 35.69 0.12 35.81 1.82 37.63

20 mm diameter pipe.

Amount 29.74 A 12.01 41.75 0.12 41.87 1.82 43.69

25 mm diameter pipe.

Amount 37.34 A 16.08 53.42 0.16 53.58 2.44 56.02

DSR-12

Page 1986 of 2298

32 mm diameter pipe.

Amount 46.94 A 16.27 63.21 0.16 63.37 2.46 65.83

40 mm diameter pipe.

Amount 53.49 A 20.14 73.63 0.20 73.83 3.05 76.88

50 mm diameter pipe.

Amount 66.65 A 20.14 86.79 0.20 86.99 3.05 90.04

pe Amount 29.99 A 12.01

DSR-12

Page 1987 of 2298

42.00 0.12 42.12 1.82 43.94

pe Amount 37.65 A 12.01 49.66 0.12 49.78 1.82 51.60

pe Amount 47.28 A 16.08 63.36 0.16 63.52 2.44 65.96

pe Amount 59.44 A 16.08 75.52 0.16 75.68 2.44 78.12

DSR-12

Page 1988 of 2298

pe Amount 67.73 A 18.21 85.94 0.18 86.12 2.76 88.88

pe Amount 84.40 A 18.21 102.61 0.18 102.79 2.76 105.55

Amount 106.36 A 20.14 126.50 0.20 126.70 3.05 129.75

DSR-12

Page 1989 of 2298

Amount 124.59 A 22.08 146.67 0.22 146.89 3.35 150.24

mm diameter pipe Amount

471.38 471.38 4.71 476.09 71.41 547.50

mm diameter pipe Amount

DSR-12

Page 1990 of 2298

477.75 477.75 4.78 482.53 72.38 554.91

mm diameter pipe Amount

490.49 490.49 4.90 495.39 74.31 569.70

mm diameter pipe Amount

DSR-12

Page 1991 of 2298

503.23 503.23 5.03 508.26 76.24 584.50

mm diameter pipe Amount

509.60 509.60 5.10 514.70 77.21 591.91

mm diameter pipe Amount

528.71

DSR-12

Page 1992 of 2298

528.71 5.29 534.00 80.10 614.10

Amount

834.47 834.47 8.34 842.81 126.42 969.23

Amount

859.95 859.95 8.60 868.55

DSR-12

Page 1993 of 2298

130.28 998.83

Amount

910.91 910.91 9.11 920.02 138.00 1058.02

Amount

1356.81 1356.81 13.57 1370.38 205.56 1575.94

DSR-12

Page 1994 of 2298

Amount

150.50 741.00 387.50 40.20 20.14 1339.34 13.39 1352.73 202.91 1555.64

pth. Amount

186.62 864.50 480.50 40.20 20.14 1591.96 15.92 1607.88 241.18 1849.06

epth. Amount

225.75 988.00 581.25

DSR-12

Page 1995 of 2298

40.20 20.14 1855.34 18.55 1873.89 281.08 2154.97

Amount

495.00 20.14 51.17 41.99 10.65 618.95 6.19 625.14 93.77 718.91

Amount

2060.40 2.90 10.07 99.33 185.25 10.80 2368.75 23.69 2392.44 358.87 2751.31

DSR-12

Page 1996 of 2298

Amount

550.00 20.14 30.10 24.70 6.59 631.53 6.32 637.85 95.68 733.53

: 15 mm nominal bore

Amount 40.00 2.71 33.11 27.17 102.99 1.03 104.02 15.60 119.62

- 20 mm nominal bore

Amount 60.00 2.71 33.11 27.17 122.99 1.23 124.22 18.63 142.85

DSR-12

Page 1997 of 2298

Amount 70.00 2.71 33.11 27.17 132.99 1.33 134.32 20.15 154.47

32 mm nominal bore

Amount 100.00 2.71 33.11 27.17 162.99 1.63 164.62 24.69 189.31

40 mm nominal bore

Amount 135.00 2.71 33.11 27.17 197.99 1.98 199.97 30.00 229.97

DSR-12

Page 1998 of 2298

50 mm nominal bore

Amount 180.00 2.71 45.15 37.05 264.91 2.65 267.56 40.13 307.69

Amount

390.00 2.71 45.15 37.05 474.91 4.75 479.66 71.95 551.61

Amount

480.00 2.71 45.15 37.05 564.91 5.65 570.56 85.58

DSR-12

Page 1999 of 2298

656.14

ng ...complete wherever required : 15 mm

Amount 40.00 2.71 99.33 81.51 223.55 2.24 225.79 33.87 259.66

- 20mm nominal bore

Amount 60.00 2.71 99.33 81.51 243.55 2.44 245.99 36.90 282.89

- 25 mm nominal bore

Amount 70.00 2.71 99.33

DSR-12

Page 2000 of 2298

81.51 253.55 2.54 256.09 38.41 294.50

- 32 mm nominal bore

Amount 100.00 2.71 99.33 81.51 283.55 2.84 286.39 42.96 329.35

- 40 mm nominal bore

Amount 135.00 2.71 99.33 81.51 318.55 3.19 321.74 48.26 370.00

-50 mm nominal bore

Amount

DSR-12

Page 2001 of 2298

180.00 2.71 135.45 111.15 429.31 4.29 433.60 65.04 498.64

15 mm nominal bore

Amount 390.00 2.71 135.45 111.15 639.31 6.39 645.70 96.86 742.56

Amount

480.00 2.71 135.45 111.15 729.31 7.29 736.60 110.49 847.09

DSR-12

Page 2002 of 2298

ings and the base support for tank

Amount 2225.00 267.31 133.65 2625.96 26.26 2652.22 397.83 3050.05

Amount 325.00 17.24 342.24 3.42 345.66 51.85 397.51

ng not less than 810 gms -15 mm nominal

Amount 330.00 24.21 354.21 3.54 357.75 53.66 411.41

weighing not less than 690 gms. 15 mm

DSR-12

Page 2003 of 2298

Amount

350.00 20.73 370.73 3.71 374.44 56.17 430.61

Amount 350.00 17.24 367.24 3.67 370.91 55.64 426.55

mm nominal bore Amount 370.00 16.85 386.85 3.87 390.72 58.61 449.33

not less than 88 gms. Amount 100.00 12.01 112.01

DSR-12

Page 2004 of 2298

1.12 113.13 16.97 130.10

. not less than 99 gms. Amount 140.00 12.01 152.01 1.52 153.53 23.03 176.56

t. not less than 110 gms.

Amount 160.00 12.01 172.01 1.72 173.73 26.06 199.79

not less than 93 gms. Amount 133.00 12.01 145.01 1.45 146.46 21.97 168.43

DSR-12

Page 2005 of 2298

t. not less than 88 gms. Amount 100.00 12.01 112.01 1.12 113.13 16.97 130.10

not less than 88 gms. Amount 130.00 12.01 142.01 1.42 143.43 21.51 164.94

. not less than 108 gms. Amount 173.00 12.01 185.01 1.85 186.86 28.03 214.89

DSR-12

Page 2006 of 2298

Wt. not less than 110 gms.

Amount 160.00 14.14 174.14 1.74 175.88 26.38 202.26

oam flow. Wt. not less than 120 gms.

Amount 225.00 14.14 239.14 2.39 241.53 36.23 277.76

t. not less than 75 gms. Amount 90.00 12.01 102.01 1.02 103.03 15.45 118.48

t. not less than 46 gms. Amount 80.00

DSR-12

Page 2007 of 2298

12.01 92.01 0.92 92.93 13.94 106.87

Amount 31.00 6.20 37.20 0.37 37.57 5.64 43.21

25 mm waste hole. Amount 37.00 6.20 43.20 0.43 43.63 6.54 50.17

mm size square 100 mm dia. of the inner

Amount 101.00 6.20 107.20 1.07 108.27

DSR-12

Page 2008 of 2298

16.24 124.51

Amount

33700.00 38.74 58.11

926.60 A 34723.45 337.97 35061.42 5120.22 40181.64

Amount

49300.00 38.74 58.11

926.60 A 50323.45 493.97 50817.42 7483.62 58301.04

Amount

64000.00

DSR-12

Page 2009 of 2298

38.74 77.48

1552.60 A 65668.82 641.16 66309.98 9713.61 76023.59

mm dia nominal bore. Amount

2030.00 193.70 38.74 58.11

185.32 A 2505.87 23.21 2529.08 351.56 2880.64

mm dia nominal bore.

Amount

3150.00 193.70 38.74 77.48

310.52 A 3770.44 34.60 3805.04 524.18 4329.22

DSR-12

Page 2010 of 2298

mm dia nominal bore.

Amount

4560.00 232.44 58.11 96.85

385.64 A 5333.04 49.47 5382.51 749.53 6132.04

mm dia nominal bore.

Amount

5100.00 232.44 77.48 154.96

397.26 A 5962.14 55.65 6017.79 843.08 6860.87

Amount

DSR-12

Page 2011 of 2298

2620.00 38.74 58.11

185.32 A 2902.17 27.17 2929.34 411.60 3340.94

Amount

4180.00 38.74 77.48

310.52 A 4606.74 42.96 4649.70 650.88 5300.58

Amount

5420.00 58.11 96.85

385.64 A 5960.60 55.75 6016.35 844.61 6860.96

DSR-12

Page 2012 of 2298

Amount

7550.00 77.48 154.96

397.26 A 8179.70 77.82 8257.52 1179.04 9436.56

m nominal bore, 105 mm long. Wt. not less

Amount 134.00 32.15 166.15 1.66 167.81 25.17 192.98

m nominal bore, 120 mm long. Wt. not less

Amount 195.00 40.10 235.10 2.35 237.45 35.62 273.07

DSR-12

Page 2013 of 2298

m nominal bore, 152mm long. Wt. not less

Amount 420.00 48.04 468.04 4.68 472.72 70.91 543.63

m nominal bore, 206mm long. Wt. not less

Amount 780.00 48.04 828.04 8.28 836.32 125.45 961.77

Amount 1150.00 48.04 1198.04 11.98 1210.02 181.50 1391.52

DSR-12

Page 2014 of 2298

Amount 130.00 12.01 142.01 1.42 143.43 21.51 164.94

Amount 87.00 10.07 97.07 0.97 98.04 14.71 112.75

mm with concealed fitting arrangements.

Amount 120.00 10.07 130.07 1.30 131.37 19.71 151.08

per IS : 1538: Upto 300 mm diametre.

DSR-12

Page 2015 of 2298

Amount 5850.00 7.77 186.11 A 6043.88 58.58 6102.46 887.45 6989.91

per IS : 1538: Above 300 mm diametre.

Amount 7500.00 7.77 186.11 A 7693.88 75.08 7768.96 1137.43 8906.39

0 mm diametre. Amount 8200.00 7.77 186.11 A 8393.88 82.08 8475.96 1243.48 9719.44

00 mm diametre.

DSR-12

Page 2016 of 2298

Amount 8880.00 7.77 186.11 A 9073.88 88.88 9162.76 1346.50 10509.26

diametre. Amount 11850.00 7.77 186.11 A 12043.88 118.58 12162.46 1796.45 13958.91

diametre. Amount 16280.00 7.77 186.11 A 16473.88 162.88 16636.76 2467.60 19104.36

DSR-12

Page 2017 of 2298

Amount 12540.00 7.77 186.11 A 12733.88 125.48 12859.36 1900.99 14760.35

Amount 17580.00 7.77 186.11 A 17773.88 175.88 17949.76 2664.55 20614.31

e cost of rubber gasket : 100 mm diametre

Amount

1300.00 301.00 273.00 247.00 2121.00 21.21 2142.21 321.33 2463.54

DSR-12

Page 2018 of 2298

e cost of rubber gasket : 150 mm diametre

Amount

1800.00 451.50 409.50 741.00 3402.00 34.02 3436.02 515.40 3951.42

e cost of rubber gasket : 200 mm diametre

Amount 3100.00 602.00 546.00 988.00 5236.00 52.36 5288.36 793.25 6081.61

e cost of rubber gasket : 250 mm diametre

Amount 3650.00 752.50 682.50 1235.00 6320.00 63.20 6383.20 957.48 7340.68

DSR-12

Page 2019 of 2298

e cost of rubber gasket : 300 mm diametre

Amount 5150.00 903.00 819.00 1482.00 8354.00 83.54 8437.54 1265.63 9703.17

e cost of rubber gasket : 350 mm diametre

Amount 6350.00 903.00 819.00 1482.00 9554.00 95.54 9649.54 1447.43 11096.97

e cost of rubber gasket : 400 mm diametre

Amount 11700.00 1204.00 1092.00 1976.00 15972.00 159.72 16131.72

DSR-12

Page 2020 of 2298

2419.76 18551.48

e cost of rubber gasket : 450 mm diametre

Amount 13000.00 1354.50 1228.50 2223.00 17806.00 178.06 17984.06 2697.61 20681.67

e cost of rubber gasket : 500 mm diametre

Amount 14250.00 1429.75 1296.75 2346.50 19323.00 193.23 19516.23 2927.43 22443.66

e cost of rubber gasket : 600 mm diametre

Amount 17600.00 1956.50 1774.50 3211.00

DSR-12

Page 2021 of 2298

24542.00 245.42 24787.42 3718.11 28505.53

e cost of rubber gasket : 650 mm diametre

Amount 27100.00 2317.70 2102.10 3803.80 35323.60 353.24 35676.84 5351.53 41028.37

e cost of rubber gasket : 700 mm diametre

Amount 31800.00 2317.70 2102.10 3803.80 40023.60 400.24 40423.84 6063.58 46487.42

e cost of rubber gasket : 800 mm diametre

Amount 34200.00

DSR-12

Page 2022 of 2298

2558.50 2320.50 4199.00 43278.00 432.78 43710.78 6556.62 50267.40

e cost of rubber gasket : 900 mm diametre

Amount 45750.00 3010.00 2730.00 4940.00 56430.00 564.30 56994.30 8549.15 65543.45

ng the cost of rubber gasket : 1000 mm

Amount 56900.00 3311.00 3003.00 5434.00 68648.00 686.48 69334.48 10400.17 79734.65

(IS : 1536): 100 mm diametre C.I. Double

Amount

DSR-12

Page 2023 of 2298

6300.00 9.57 137.31 A 6446.88 63.10 6509.98 955.90 7465.88

(IS : 1536): 150 mm diametre C.I. Double

Amount

9800.00 15.96 224.78 A

10040.74 98.16 10138.90 1487.12 11626.02

(IS : 1536): 200 mm diametre C.I. Double

Amount

15850.00 25.96 323.44 A

16199.40

DSR-12

Page 2024 of 2298

158.76 16358.16 2405.21 18763.37

(IS : 1536): 250 mm diametre C.I. Double

Amount

18650.00 36.88 434.30 A

19121.18 186.87 19308.05 2831.06 22139.11

(IS : 1536): 300 mm diametre C.I. Double

Amount

23850.00 45.59 559.41 A

24455.00 238.96 24693.96 3620.18 28314.14

DSR-12

Page 2025 of 2298

(IS : 1536): 350 mm diametre C.I. Double

Amount

30400.00 63.83

690.61 A

31154.44 304.64 31459.08 4615.27 36074.35

(IS : 1536): 400 mm diametre C.I. Double

Amount

39450.00 87.03 848.26 A 40385.29 395.37 40780.66 5989.86 46770.52

(IS : 1536): 450 mm diametre C.I. Double

Amount

49700.00

DSR-12

Page 2026 of 2298

106.38 1025.24 A

50831.62 498.06 51329.68 7545.67 58875.35

(IS : 1536): 500 mm diametre C.I. Double

Amount

61950.00 106.38 1194.08 A

63250.46 620.56 63871.02 9401.54 73272.56

(IS : 1536): 600 mm diametre C.I. Double

Amount

76650.00 159.56 1603.97 A

78413.53 768.10 79181.63 11636.65 90818.28

DSR-12

Page 2027 of 2298

metre Ductile iron Class K - 7 pipes.

Amount

7080.00 19.15 156.63 A 7255.78 70.99 7326.77 1075.52 8402.29

metre Ductile iron Class K - 7 pipes.

Amount

10350.00 31.91 231.90 A 10613.81 103.82 10717.63 1572.86 12290.49

metre Ductile iron Class K - 7 pipes.

Amount

DSR-12

Page 2028 of 2298

14150.00 51.91 306.15 A 14508.06 142.02 14650.08 2151.59 16801.67

metre Ductile iron Class K - 7 pipes.

Amount

19200.00 73.77 399.72 A 19673.49 192.74 19866.23 2919.98 22786.21

metre Ductile iron Class K - 7 pipes.

Amount

26380.00 91.18 492.28 A 26963.46 264.71 27228.17 4010.38 31238.55

DSR-12

Page 2029 of 2298

metre Ductile iron Class K - 7 pipes.

Amount

31350.00 127.65 671.29 A 32148.94 314.78 32463.72 4768.86 37232.58

metre Ductile iron Class K - 7 pipes.

Amount

37140.00 174.07 796.39 A 38110.46 373.14 38483.60 5653.08 44136.68

metre Ductile iron Class K - 7 pipes.

Amount

DSR-12

Page 2030 of 2298

44110.00 212.75 929.63 A 45252.38 443.23 45695.61 6714.90 52410.51

metre Ductile iron Class K - 7 pipes.

Amount

52140.00 212.75 1084.23 A 53436.98 523.53 53960.51 7931.44 61891.95

metre Ductile iron Class K - 7 pipes.

Amount

68010.00 319.13 1409.70 A 69738.83 683.29 70422.12 10351.86

DSR-12

Page 2031 of 2298

80773.98

metre Ductile iron Class K - 7 pipes.

Amount

87390.00 319.13 1921.30 A 89630.43 877.09 90507.52 13287.93 103795.45

metre Ductile iron Class K - 7 pipes.

Amount

111560.00 319.13 2476.64 A 114355.77 1118.79 115474.56 16949.69 132424.25

metre Ductile iron Class K - 7 pipes.

Amount

DSR-12

Page 2032 of 2298

146170.00 478.69 2875.34 A 149524.03 1466.49 150990.52 22217.28 173207.80

etre Ductile iron Class K - 7 pipes.

Amount

154850.00 638.25 3541.54 A 159029.79 1554.88 160584.67 23556.47 184141.14

metre Ductile iron Class K - 9 pipes.

Amount

7970.00 19.15 180.64 A 8169.79 79.89 8249.68 1210.36

DSR-12

Page 2033 of 2298

9460.04

metre Ductile iron Class K - 9 pipes.

Amount

11700.00 31.91 267.19 A 11999.10 117.32 12116.42 1777.38 13893.80

metre Ductile iron Class K - 9 pipes.

Amount

15950.00 51.91 367.68 A 16369.59 160.02 16529.61 2424.29 18953.90

metre Ductile iron Class K - 9 pipes.

Amount

DSR-12

Page 2034 of 2298

21050.00 73.77 488.21 A 21611.98 211.24 21823.22 3200.25 25023.47

metre Ductile iron Class K - 9 pipes.

Amount

26800.00 91.18 615.24 A 27506.42 268.91 27775.33 4074.01 31849.34

Ductile Iron Class K-9 pipes

Amount

32250.00 127.65 810.93 A 33188.58 323.78

DSR-12

Page 2035 of 2298

33512.36 4905.21 38417.57

metre Ductile iron Class K - 9 pipes.

Amount

43500.00 174.07 964.21 A 44638.28 436.74 45075.02 6616.62 51691.64

metre Ductile iron Class K - 9 pipes.

Amount

50850.00 212.75 1128.68 A 52191.43 510.63 52702.06 7736.01 60438.07

metre Ductile iron Class K - 9 pipes.

DSR-12

Page 2036 of 2298

Amount

61800.00 212.75 1316.94 A 63329.69 620.13 63949.82 9394.93 73344.75

metre Ductile iron Class K - 9 pipes.

Amount

74300.00 319.13 1715.64 A 76334.77 746.19 77080.96 11304.80 88385.76

metre Ductile iron Class K - 9 pipes.

Amount

100500.00 212.75 2212.60 A 102925.35 1007.13

DSR-12

Page 2037 of 2298

103932.48 15257.98 119190.46

metre Ductile iron Class K - 9 pipes.

Amount

113500.00 478.69 2467.48 A 116446.17 1139.79 117585.96 17267.77 134853.73

metre Ductile iron Class K - 9 pipes.

Amount

119900.00 638.25 2716.67 A 123254.92 1205.38 124460.30 18261.54 142721.84

metre Ductile iron Class K - 9 pipes.

DSR-12

Page 2038 of 2298

Amount

140300.00 638.25 3267.84 A 144206.09 1409.38 145615.47 21352.14 166967.61

etre Ductile iron Class K - 9 pipes.

Amount

157500.00 638.28 3866.91 A 162005.19 1581.38 163586.57 23957.95 187544.52

pipes class -9 IS : 8329: 100 mm diametre

Amount

10125.00 9.57 110.86 A 10245.43 101.35

DSR-12

Page 2039 of 2298

10346.78 1535.39 11882.17

pipes class -9 IS : 8329: 150 mm diametre

Amount

14125.00 15.96 165.79 A 14306.75 141.41 14448.16 2142.36 16590.52

pipes class -9 IS : 8329: 200 mm diametre

Amount

18700.00 25.96 224.78 A 18950.74 187.26 19138.00 2836.98 21974.98

pipes class -9 IS : 8329: 250 mm diametre

DSR-12

Page 2040 of 2298

Amount

24675.00 36.88 302.08 A 25013.96 247.12 25261.08 3743.85 29004.93

pipes class -9 IS : 8329: 300 mm diametre

Amount

31650.00 45.59 388.53 A 32084.12 316.96 32401.08 4801.88 37202.96

pipes class -9 IS : 8329: 350 mm diametre

Amount

40100.00 63.83 464.81 A 40628.64 401.64

DSR-12

Page 2041 of 2298

41030.28 6084.82 47115.10

pipes class -9 IS : 8329: 400 mm diametre

Amount

48225.00 87.03 549.23 A 48861.26 483.12 49344.38 7319.27 56663.65

pipes class -9 IS : 8329: 450 mm diametre

Amount

58375.00 106.38 649.93 A 59131.31 584.81 59716.12 8859.93 68576.05

pipes class -9 IS : 8329: 500 mm diametre

DSR-12

Page 2042 of 2298

Amount

69475.00 106.38 752.65 A 70334.03 695.81 71029.84 10541.58 81571.42

pipes class -9 IS : 8329: 600 mm diametre

Amount

93800.00 159.56 1012.01 A 94971.57 939.60 95911.17 14234.87 110146.04

pipes class -9 IS : 8329: 700 mm diametre

Amount

116375.00 106.38 1296.80 A 117778.18 1164.81

DSR-12

Page 2043 of 2298

118942.99 17646.93 136589.92

with 30cm length. Amount 33.00 18.21 51.21 0.51 51.72 7.76 59.48

with 45 cm length Amount 38.00

20.14 58.14 0.58 58.72 8.81 67.53

s than 32 gms. Amount 32.00 5.04 37.04 0.37 37.41 5.61 43.02

DSR-12

Page 2044 of 2298

0gms. Amount 38.00 5.04 43.04 0.43 43.47 6.52 49.99

weighing not less than 62 grams.

Amount 57.00 5.04 62.04 0.62 62.66 9.40 72.06

Amount

48.16 43.68 308.75

854.25 A

DSR-12

Page 2045 of 2298

158.53 B

24.02 12.01 1449.40 4.37 1453.77 66.15 1519.92

ng finishing complete so as to make it leak

Amount 249.83 226.59 412.49

90.28 A 180.53 60.05 32.15 1251.92 11.62 1263.54 175.99 1439.53

Amount

75.25 68.25 247.00

DSR-12

Page 2046 of 2298

191.29 A 581.79 3.91 585.70 59.16 644.86

Amount

1052.12 A

20.14 1072.26 0.20 1072.46 3.05 1075.51

pipe. Amount

14.00 99.33 323.57 14.72 451.62 4.52 456.14 68.42 524.56

I. pipe.

DSR-12

Page 2047 of 2298

Amount

21.00 147.49 405.08 20.14 593.71 5.94 599.65 89.95 689.60

I. pipe. Amount

31.50 198.66 486.59 26.73 743.48 7.43 750.91 112.64 863.55

I. pipe. Amount

47.25 246.82 568.10 34.09 896.26 8.96 905.22 135.78 1041.00

DSR-12

Page 2048 of 2298

I. pipe. Amount

82.25 346.15 728.65 46.88 1203.93 12.04 1215.97 182.40 1398.37

I. pipe. Amount

129.50 445.48 891.67 60.05 1526.70 15.27 1541.97 231.30 1773.27

I. pipe. Amount

185.50 493.64 973.18 66.25

DSR-12

Page 2049 of 2298

1718.57 17.19 1735.76 260.36 1996.12

I. pipe. Amount

252.00 541.80 1054.69 72.06 1920.55 19.21 1939.76 290.96 2230.72

I. pipe. Amount

330.75 592.97 1133.73 80.19 2137.64 21.38 2159.02 323.85 2482.87

I. pipe. Amount

DSR-12

Page 2050 of 2298

418.25 641.13 1215.24 86.78 2361.40 23.61 2385.01 357.75 2742.76

I. pipe. Amount

516.25 692.30 1296.75 94.91 2600.21 26.00 2626.21 393.93 3020.14

I. pipe. Amount

742.00 788.62 1459.77 106.34 3096.73 30.97 3127.70 469.16 3596.86

DSR-12

Page 2051 of 2298

g bleaching powder at 0.5 gms per litre of

Amount 5.25 33.11 121.03 6.59 165.98 1.66 167.64 25.15 192.79

g bleaching powder at 0.5 gms per litre of

Amount 7.00 48.16 140.79 6.59 202.54 2.03 204.57 30.69 235.26

g bleaching powder at 0.5 gms per litre of

Amount 10.50 66.22 163.02 8.14 247.88 2.48 250.36 37.55 287.91

DSR-12

Page 2052 of 2298

g bleaching powder at 0.5 gms per litre of

Amount 15.75 81.27 182.78 10.65 290.45 2.90 293.35 44.00 337.35

g bleaching powder at 0.5 gms per litre of

Amount 28.00 174.58 222.30 14.72 439.60 4.40 444.00 66.60 510.60

g bleaching powder at 0.5 gms per litre of

Amount 43.75 180.60 271.70 16.08 512.13 5.12 517.25 77.59 594.84

DSR-12

Page 2053 of 2298

g bleaching powder at 0.5 gms per litre of

Amount 61.25 180.60 321.10 20.14 583.09 5.83 588.92 88.34 677.26

g bleaching powder at 0.5 gms per litre of

Amount 84.00 210.70 370.50 24.02 689.22 6.89 696.11 104.42 800.53

g bleaching powder at 0.5 gms per litre of

Amount 110.25 240.80 419.90 26.73 797.68 7.98 805.66 120.85

DSR-12

Page 2054 of 2298

926.51

g bleaching powder at 0.5 gms per litre of

Amount 140.00 270.90 469.30 30.80 911.00 9.11 920.11 138.02 1058.13

g bleaching powder at 0.5 gms per litre of

Amount 171.50 301.00 518.70 34.67 1025.87 10.26 1036.13 155.42 1191.55

g bleaching powder at 0.5 gms per litre of

Amount 246.75 361.20 617.50 38.74 1264.19

DSR-12

Page 2055 of 2298

12.64 1276.83 191.52 1468.35

pipes : 80 mm diameter C.I. pipe.

Amount

2133.02 A 1366.78 B

167.85 11.37 136.50 988.00 80.19 4883.71 13.84 4897.55 209.66 5107.21

pipes : 100 mm diametre C.I. pipe.

Amount

2114.71 A 1355.05 B

209.70 11.37

DSR-12

Page 2056 of 2298

171.99 1111.50 80.19 5054.51 15.85 5070.36 240.09 5310.45

pipes : 125 mm diametre C.I. pipe.

Amount

2087.25 A 1337.45 B

251.55 17.04 204.75 1235.00 80.19 5213.23 17.89 5231.12 270.96 5502.08

pipes : 150 mm diametre C.I. pipe.

Amount

2053.25 A 1315.66 B

DSR-12

Page 2057 of 2298

293.85 17.04 242.15 1358.50 100.14 5380.59 20.12 5400.71 304.77 5705.48

pipes : 200 mm diametre C.I. pipe.

Amount

2165.72 A 1387.73 B

378.00 22.73 300.30 1605.50 100.14 5960.12 24.07 5984.19 364.61 6348.80

pipes : 250 mm diametre C.I. pipe.

Amount

DSR-12

Page 2058 of 2298

2257.26 A 1446.39 B

461.70 34.10 354.90 1852.50 120.29 6527.14 28.23 6555.37 427.76 6983.13

pipes : 300 mm diametre C.I. pipe.

Amount

2326.58 A 1490.80 B

504.00 45.45 409.50 2099.50 140.24 7016.07 31.99 7048.06 484.60 7532.66

pipes : 350 mm diametre C.I. pipe.

DSR-12

Page 2059 of 2298

Amount

2372.35 A 1520.13 B

545.85 45.45 477.75 2346.50 160.38 7468.41 35.76 7504.17 541.75 8045.92

pipes : 400 mm diametre C.I. pipe.

Amount

2384.12 A 1527.67 B

587.70 56.82 546.00 2593.50 180.33 7876.14 39.64 7915.78 600.60 8516.38

DSR-12

Page 2060 of 2298

pipes : 450 mm diametre C.I. pipe.

Amount

2403.74 A 1540.24 B

630.00 68.19 614.25 2840.50 200.48 8297.40 43.53 8340.93 659.54 9000.47

pipes : 500 mm diametre C.I. pipe.

Amount

2385.43 A 1528.51 B

671.40 79.56 682.50 3087.50 220.43 8655.33 47.41 8702.74 718.32 9421.06

DSR-12

Page 2061 of 2298

pipes : 600 mm diametre C.I. pipe.

Amount

2280.80 A 1461.47 B

756.00 102.30 819.00 3581.50 260.53 9261.60 55.19 9316.79 836.18 10152.97

Amount

18.06 14.82 2.71 35.59 0.36 35.95 5.39 41.34

Amount

DSR-12

Page 2062 of 2298

24.08 19.76 4.07 47.91 0.48 48.39 7.26 55.65

Amount

33.11 27.17 6.59 66.87 0.67 67.54 10.13 77.67

Amount

45.15 37.05 7.94 90.14 0.90 91.04 13.66 104.70

Amount

60.20

DSR-12

Page 2063 of 2298

49.40 10.65 120.25 1.20 121.45 18.22 139.67

Amount

75.25 61.75 12.01 149.01 1.49 150.50 22.58 173.08

Amount

90.30 74.10 14.72 179.12 1.79 180.91 27.14 208.05

Amount

105.35 86.45 16.08 207.88

DSR-12

Page 2064 of 2298

2.08 209.96 31.49 241.45

Amount

120.40 98.80 18.60 237.80 2.38 240.18 36.03 276.21

Amount

135.45 111.15 20.14 266.74 2.67 269.41 40.41 309.82

Amount

150.50 123.50 22.66 296.66 2.97 299.63 44.94

DSR-12

Page 2065 of 2298

344.57

Amount

180.60 148.20 24.02 352.82 3.53 356.35 53.45 409.80

ck, having foam flow technology - 15 mm

Amount 5822.50 12.01 5834.51 58.35 5892.86 883.93 6776.79

testing of joints etc. Complete : 100 mm

Amount 1980.00 38.54

95.00 1.48 6.40 0.88 180.00

DSR-12

Page 2066 of 2298

301.00 273.00 741.00 260.00 3877.30 38.77 3916.07 587.41 4503.48

testing of joints etc. Complete : 150 mm

Amount 2915.00 77.09

180.00 2.80 12.16 1.66 360.00

451.50 409.50 988.00 260.00 5657.71 56.58 5714.29 857.14 6571.43

testing of joints etc. Complete : 200 mm

Amount 5005.00 128.48

265.00 4.13 17.92 2.45

DSR-12

Page 2067 of 2298

480.00

526.75 477.75 1111.50 325.00 8343.98 83.44 8427.42 1264.11 9691.53

testing of joints etc. Complete : 250 mm

Amount 7150.00 220.25 470.00 7.32 32.00 4.38 600.00

677.25 614.25 1358.50 390.00 11523.95 115.24 11639.19 1745.88 13385.07

testing of joints etc. Complete : 250 mm

Amount 7150.00 220.25

470.00 7.32

DSR-12

Page 2068 of 2298

32.00 4.38 600.00

677.25 614.25 1358.50 390.00 11523.95 115.24 11639.19 1745.88 13385.07

al size) all-round S.W. pipes .. ..: 100 mm

Amount

4968.92 A 4968.92 0.00 4968.92 0.00 4968.92

al size) all-round S.W. pipes .. ..: 150 mm

Amount

DSR-12

Page 2069 of 2298

6076.86 A 6076.86 0.00 6076.86 0.00 6076.86

al size) all-round S.W. pipes .. .. 200 mm

Amount

7084.07 A 7084.07 0.00 7084.07 0.00 7084.07

al size) all-round S.W. pipes .. .. 250 mm

Amount

DSR-12

Page 2070 of 2298

8192.01 A 8192.01 0.00 8192.01 0.00 8192.01

e)up to haunches.. including bed concrete

Amount

2361.58 A 2361.58 0.00 2361.58 0.00 2361.58

al size) all-round S.W. pipes .. ..: 150 mm

Amount

DSR-12

Page 2071 of 2298

3827.41 A 3827.41 0.00 3827.41 0.00 3827.41

al size) all-round S.W. pipes .. ..: 200 mm

Amount

DSR-12

Page 2072 of 2298

4498.89 A 4498.89 0.00 4498.89 0.00 4498.89

al size) all-round S.W. pipes .. ..: 250 mm

Amount

5237.51 A 5237.51 0.00 5237.51 0.00 5237.51

al size) all-round S.W. pipes .. ..: 250 mm

Amount

DSR-12

Page 2073 of 2298

5237.51 A 5237.51 0.00 5237.51 0.00 5237.51

mm : 100x100 mm size P type With F.P.S.

Amount 70.00 15.00 280.00 6.71

DSR-12

Page 2074 of 2298

277.87 A

456.07 B

42.18 C

50.20 D 1198.03 3.72 1201.75 56.31 1258.06

mm : 100x100 mm size P typeWith Sewer

Amount 70.00 15.00 280.00 6.71

277.87 A

493.32 B

DSR-12

Page 2075 of 2298

42.18 C

50.20 D 1235.28 3.72 1239.00 56.31 1295.31

mm : 150 x 100 mm size P type With F.P.S.

Amount 104.00 25.00 280.00 6.71

247.00 A

456.07 B

42.18 C

51.93 D 1212.89 4.16 1217.05 62.98 1280.03

DSR-12

Page 2076 of 2298

00 mm size P type : With Sewer bricks IS:

Amount 104.00 25.00 280.00 6.71

247.00 A

493.32 B

42.18 C

51.93 D 1250.14 4.16 1254.30 62.98 1317.28

mm size P type : With F.P.S. bricks.

Amount

DSR-12

Page 2077 of 2298

195.00 30.00 280.00 6.71

247.00 A

456.07 B

42.18 C

27.69 D 1284.65 5.12 1289.77 77.52 1367.29

50 mm size P type : With Sewer bricks IS:

Amount 195.00 30.00 280.00 6.71

DSR-12

Page 2078 of 2298

247.00 A

493.32 B

42.18 C

27.69 D 1321.90 5.12 1327.02 77.52 1404.54

meter. Amount 121.03 88.92 209.95 2.10 212.05 31.81 243.86

meter. Amount 121.03 111.15 232.18 2.32 234.50 35.18

DSR-12

Page 2079 of 2298

269.68

meter. Amount 121.03 125.97 247.00 2.47 249.47 37.42 286.89

meter. Amount 121.03 140.79 261.82 2.62 264.44 39.67 304.11

meter. Amount 121.03 155.61 276.64 2.77 279.41 41.91 321.32

meter.

DSR-12

Page 2080 of 2298

Amount 148.20 170.43 318.63 3.19 321.82 48.27 370.09

meter. Amount 163.02 185.25 348.27 3.48 351.75 52.76 404.51

meter. Amount 163.02 200.07 363.09 3.63 366.72 55.01 421.73

the proportion of 1:2 -complete : 100 mm

Amount 1350.00 100.00 19.15 25.00

DSR-12

Page 2081 of 2298

0.39 3.84 0.53 96.32 87.36 155.61 41.60 1879.80 18.80 1898.60 284.79 2183.39

the proportion of 1:2 -complete : 150 mm

Amount 1540.00 125.00 31.91 30.00

0.47 5.12 0.70 117.39 106.47 192.66 41.60 2191.32 21.91 2213.23 331.98 2545.21

the proportion of 1:2 -complete : 250 mm

Amount 1880.00 200.00 73.77 45.00

DSR-12

Page 2082 of 2298

0.70 7.68 1.05 162.54 147.42 370.50 59.80 2948.46 29.48 2977.94 446.69 3424.63

the proportion of 1:2 -complete : 300 mm

Amount 2610.00 196.00 91.18 55.00

0.86 9.60 1.31 177.59 161.07 286.52 52.00 3641.13 36.41 3677.54 551.63 4229.17

the proportion of 1:2 -complete : 450 mm

Amount 3800.00 300.00 212.75 120.00

DSR-12

Page 2083 of 2298

1.87 21.12 2.89 225.75 204.75 370.50 85.80 5345.43 53.45 5398.88 809.83 6208.71

the proportion of 1:2 -complete : 500 mm

Amount 4540.00 356.00 212.75 130.00 2.02 23.04 3.15 243.81 221.13 400.14 85.80 6217.84 62.18 6280.02 942.00 7222.02

the proportion of 1:2 -complete : 100 mm

Amount 7320.00 436.00 319.13

DSR-12

Page 2084 of 2298

160.00 2.49 27.52 3.77 276.92 251.16 452.01 85.80 9334.80 93.35 9428.15 1414.22 10842.37

CC pipe . Amount 9950.00 484.00 319.13 185.00 2.88 32.00 4.38 310.03 281.19 508.82 109.20 12186.63 121.87 12308.50 1846.28 14154.78

Amount 9600.00 688.00 319.13 210.00 3.27 36.48

DSR-12

Page 2085 of 2298

4.99 343.14 311.22 563.16 109.20 12188.59 121.89 12310.48 1846.57 14157.05

Amount 11250.00 840.00 478.69 245.00 3.82 42.24 5.78 376.25 341.25 741.00 130.00 14454.03 144.54 14598.57 2189.79 16788.36

Amount 14200.00 1024.00 638.25 275.00 4.28 47.36 6.48 409.36

DSR-12

Page 2086 of 2298

371.28 1069.51 130.00 18175.52 181.76 18357.28 2753.59 21110.87

Amount 17300.00 1132.00 638.25 305.00 4.75 52.48 7.18 442.47 401.31 1556.10 156.00 21995.54 219.96 22215.50 3332.33 25547.83

Amount 17600.00 1320.00 638.28 340.00 5.30 58.88 8.06 478.59 434.07 2141.49

DSR-12

Page 2087 of 2298

174.20 23198.87 231.99 23430.86 3514.63 26945.49

cover and frame(38kg) : With non-modular

Amount

1545.12 A

1192.81 B

722.24 C

43.27 D

1208.80 E

-101.27

600.06 F

DSR-12

Page 2088 of 2298

136.94 G

18.06 16.38 1415.00 10.07 10.07 20.14 6837.69 13.88 6851.57 210.35 7061.92

nnel CC 1:2:4 :- inside size 90x80 cm 45 cm

Amount

1545.12 A

1290.23 B

722.24 C

43.27 D

DSR-12

Page 2089 of 2298

1208.80 E

-101.27

600.06 F

136.94 G

18.06 16.38 1415.00 10.07 10.07 20.14 6935.11 13.88 6948.99 210.35 7159.34

.I. cover and frame(58kg) : With common

Amount

1976.32 A

3262.67 B

DSR-12

Page 2090 of 2298

1128.51 C

379.07 D

1703.31 E

-143.26

1409.60 F

273.87 G

24.08 21.84 4435.00 10.07 10.07 24.79 14515.94 43.83 14559.77 663.96 15223.73

nnel CC 1:2:4 :- inside size 120 x 90 x 90 cm

Amount

DSR-12

Page 2091 of 2298

1976.32 A

3529.15 B

1128.51 C

379.07 D

1703.31 E

-143.26

1409.60 F

273.87 G

24.08 21.84 4435.00 10.07 10.07 24.79 14782.42 43.83 14826.25 663.96 15490.21

DSR-12

Page 2092 of 2298

nnel CC 1:2:4 :- inside size 120 x 90 x 90 cm

Amount

1976.32 A

2806.60 B

1128.51 C

417.15 D

1813.20 E

-153.14

DSR-12

Page 2093 of 2298

1500.43 F

258.31 G

24.08 21.84 8460.00 20.14 10.07 30.22 18313.73 84.13 18397.86 1274.60 19672.46

nnel CC 1:2:4 :- inside size 120 x 90 x 90 cm

Amount

1976.32 A

3035.82 B

1128.51 C

DSR-12

Page 2094 of 2298

417.15 D

1813.20 E

-153.14

1500.43 F

258.31 G

24.08 21.84 8460.00 20.14 10.07 30.22 18542.95 84.13 18627.08 1274.60 19901.68

Amount

3473.17 A

DSR-12

Page 2095 of 2298

588.51 B 4061.68 0.00 4061.68 0.00 4061.68

Amount

3756.83 A

588.51 B 4345.34 0.00 4345.34 0.00 4345.34

Amount

4139.74 A

726.98 B 4866.72 0.00 4866.72 0.00 4866.72

DSR-12

Page 2096 of 2298

Amount

4477.84 A

726.98 B 5204.82 0.00 5204.82 0.00 5204.82

r and frame (HD20 grade) wt not less than

Amount

2449.57 A

1859.37 B

127.68 C

DSR-12

Page 2097 of 2298

541.68 D

474.51 E

302.91 F

18.06 16.38 1030.00 10.27 25.18 6855.61 11.00 6866.61 166.63 7033.24

p : 0.91 m deep with SFRC cover and frame cks IS: 4885.

Amount

2449.57 A

DSR-12

Page 2098 of 2298

2011.23 B

124.43 C

541.68 D

474.51 E

302.91 F

18.06 16.38 1030.00 10.27 25.18 7004.22 11.00 7015.22 166.63 7181.85

DSR-12

Page 2099 of 2298

75. Amount

2210.20 A

45.14 B

403.30 C 2658.64 0.00 2658.64 0.00 2658.64

Amount

2390.71 A

45.14 B

403.30 C 2839.15 0.00 2839.15 0.00 2839.15

p : 1.68 m deep with SFRC cover and frame lass designation 75.

DSR-12

Page 2100 of 2298

Amount

4588.08 A

4525.64 B

127.68 C

1173.65 D

474.51 E

775.44 F

30.10 27.30 1030.00 10.27 25.18

DSR-12

Page 2101 of 2298

12787.85 11.23 12799.08 170.11 12969.19

p : 1.68 m deep with SFRC cover and frame cks IS: 4885.

Amount

4588.08 A

4895.27 B

124.43 C

1173.65 D

DSR-12

Page 2102 of 2298

474.51 E

775.44 F

30.10 27.30 1030.00 10.27 25.18 13154.23 11.23 13165.46 170.11 13335.57

Amount

2315.45 A

443.11 B 2758.56 0.00 2758.56 0.00 2758.56

Amount

2504.55 A

DSR-12

Page 2103 of 2298

443.11 B 2947.66 0.00 2947.66 0.00 2947.66

dia. at top : 2.30 m deep with SFRC Cover h bricks of class designation 75.

Amount

8748.45 A

12910.36 B

255.36 C

1895.89 D

DSR-12

Page 2104 of 2298

474.51 E

1317.21 F

30.10 27.30 1030.00 10.27 25.18 26724.63 11.23 26735.86 170.11 26905.97

dia. at top : 2.30 m deep with SFRC Cover h sewer bricks IS: 4885.

Amount

8748.45 A

13964.79 B

DSR-12

Page 2105 of 2298

248.87 C

1895.89 D

474.51 E

1317.21 F

30.10 27.30 1030.00 10.27 25.18 27772.57 11.23 27783.80 170.11 27953.91

s of class designation 75.

Amount

DSR-12

Page 2106 of 2298

18453.40 A

1556.08 B 20009.48 0.00 20009.48 0.00 20009.48

r bricks IS: 4885. Amount

19960.54 A

1556.08 B 21516.62 0.00 21516.62 0.00 21516.62

Amount

102.00 2.71 27.30 24.70

19.13 A

6.02 5.46 12.35 199.67

DSR-12

Page 2107 of 2298

1.81 201.48 27.35 228.83

Amount

72.00 2.71 27.30 24.70

19.13 A

6.02 5.46 12.35 169.67 1.51 171.18 22.81 193.99

as per IS : 10910 on 12 mm dia steel bar

Amount 110.00 2.71 43.04 A

6.02 54.60 12.35 228.72 1.86 230.58 28.13 258.71

DSR-12

Page 2108 of 2298

0 x 20 mm square bar. Amount

102.00 2.71 27.30 24.70

19.13 A

15.05 13.65 24.70 229.24 2.10 231.34 31.83 263.17

0 mm diameter round bar.

Amount

72.00 2.71 27.30 24.70

19.13 A

15.05 13.65 24.70 199.24

DSR-12

Page 2109 of 2298

1.80 201.04 27.29 228.33

uty) the weight of the cover to be not less

Amount 980.00

10.65 29.64 1020.29 10.20 1030.49 154.57 1185.06

Amount 2210.00 20.07 29.64 2259.71 22.60 2282.31 342.35 2624.66

Amount 4500.00 24.02

DSR-12

Page 2110 of 2298

29.64 4553.66 45.54 4599.20 689.88 5289.08

450 mm internal dimensions.

Amount 690.00

180.56 A 10.07 20.14 900.77 7.20 907.97 109.11 1017.08

nternal dimensions. Amount 600.00 10.07

135.42 A 20.14 765.63 6.30 771.93 95.48 867.41

DSR-12

Page 2111 of 2298

nternal diameter. Amount 560.00 10.07

135.42 A 20.14 725.63 5.90 731.53 89.42 820.95

nternal dimension. Amount 660.00 10.07

180.56 A 24.79 875.42 6.95 882.37 105.27 987.64

nternal diameter.

DSR-12

Page 2112 of 2298

Amount 630.00 10.07

135.42 A 24.79 800.28 6.65 806.93 100.73 907.66

nternal diameter. Amount 1030.00 20.14

135.42 A 30.22 1215.78 10.80 1226.58 163.67 1390.25

internal dia. Amount 1150.00 20.14

DSR-12

Page 2113 of 2298

135.42 A 30.22 1335.78 12.00 1347.78 181.85 1529.63

Amount 200.00 4.02 7.41 211.43 2.11 213.54 32.03 245.57

pipes 100 to 230 mm dia.

Amount

45.14 A

43.27 B

36.12

DSR-12

Page 2114 of 2298

32.76 61.75 30.02 249.06 1.61 250.67 24.34 275.01

pipes 250 to 300 mm dia.

Amount

90.28 A

55.39 B

36.12 32.76 61.75 30.80 307.10 1.61 308.71 24.46 333.17

pipes 350 to 450 mm dia.

Amount

DSR-12

Page 2115 of 2298

135.42 A

103.85 B

48.16 43.68 81.51 40.10 452.72 2.13 454.85 32.34 487.19

ine to main sewer manhole:- 100 mm dia.

Amount

550.00

2.13 166.95 A

44.00 210.00 310.00

24.56 B

DSR-12

Page 2116 of 2298

648.37 C

10.39 D

831.40 E 40.10

387.79 F 40.10

210.70 191.10 666.90 4334.49 22.65 4357.14 343.15 4700.29

ine to main sewer manhole:- 150 mm dia.

Amount

905.56 2.71 314.10 A

50.00 470.00 505.00

17.54 B

DSR-12

Page 2117 of 2298

864.49 C

10.39 D

1148.40 E 59.47

476.18 F 50.75

255.85 232.05 864.50 6226.99 33.96 6260.95 514.48 6775.43

dia. sand cast iron drop connection.

Amount 550.00 19.95

DSR-12

Page 2118 of 2298

494.00 A

370.68 B 10.65

12.04 10.92 9.88 1478.12 6.13 1484.25 92.94 1577.19

dia. sand cast iron drop connection.

Amount 905.56 19.95

617.49 A

413.45 B 12.05

15.05 13.65 12.35 2009.55 9.79 2019.34 148.26 2167.60

DSR-12

Page 2119 of 2298

x80cm and 45 cm deep.

Amount

177.86 A

192.64 B

107.37 C

215.37 D 10.65 703.89 0.11 704.00 1.61 705.61

0x90cm and 90 cm deep.

Amount

227.50 A

526.92 B

DSR-12

Page 2120 of 2298

167.76 C

303.48 D 10.65 1236.31 0.11 1236.42 1.61 1238.03

an hole 140 x 90 cm and 2.45 mtr deep.

Amount

297.81 A

1637.42 B

194.60 C

186.00 D 10.65 12.01

DSR-12

Page 2121 of 2298

2338.49 0.23 2338.72 3.43 2342.15

dia. and 1.68 M deep.

Amount

791.84 A

742.22 B

234.87 C 10.65 12.01 1791.59 0.23 1791.82 3.43 1795.25

DSR-12

Page 2122 of 2298

. Amount

560.91 A 2.71 563.62 0.03 563.65 0.41 564.06

p. Amount

668.56 A 2.71 671.27 0.03 671.30 0.41 671.71

d 2.45 m deep (upto 4.25 m depth).

Amount

DSR-12

Page 2123 of 2298

844.20 A

134.21 B 978.41 0.00 978.41 0.00 978.41

upto 2.29 M depth). Amount

791.84 A

DSR-12

Page 2124 of 2298

1116.16 B

234.87 C 10.65 12.05 -1795.25 D 370.32 0.23 370.55 3.44 373.99

m with rectangular cover 600 x 450 mm of

Amount

166.42 A 10.65

934.07 B

DSR-12

Page 2125 of 2298

140.05 C 20.14 1271.33 0.31 1271.64 4.66 1276.30

m with circular cover 500 mm dia of grade

Amount

254.53 A 10.65

1428.58 B

273.87 C 24.79 1992.42 0.35 1992.77 5.37 1998.14

m with circular cover 560 mm dia of grade

Amount

DSR-12

Page 2126 of 2298

234.95 A 10.65

1318.69 B

258.31 C 30.22 1852.82 0.41 1853.23 6.19 1859.42

h circular cover 600 mm dia of grade EHD-

Amount

19.58 A 12.01

105.45 B 30.22 167.26 0.42

DSR-12

Page 2127 of 2298

167.68 6.40 174.08

nation 75 in C.M 1:5 : With F.P.S. bricks.

Amount

555.74 A

1017.39 B

186.94 C

527.24 D

151.12 E 650.00 10.65 7.94 3107.02 6.69 3113.71 101.29 3215.00

gnation 75 in C.M 1 : 5: With F.P.S bricks.

Amount

DSR-12

Page 2128 of 2298

524.87 A

1508.55 B

268.29 C

5.27 D

329.67 E

-27.91 156.83 F

281.58 G

305.00 30.80 3382.95 3.08 3386.03 46.65 3432.68

DSR-12

Page 2129 of 2298

esignation 7.5 in C.M 1 : 5: With common

Amount

895.37 A

1894.46 B

408.49 C

369.07 D

329.67 E

-27.91

289.80 F

259.48 G

DSR-12

Page 2130 of 2298

454.16 H 650.00 10.65 305.00 50.75 5888.99 9.88 5898.87 149.76 6048.63

dimensions 455x610 mm and 45 cm deep

Amount

617.49 A

736.73 B

155.78 C

579.96 D

159.68 E 1415.00 10.65 10.65 20.14 3706.08 14.56 3720.64

DSR-12

Page 2131 of 2298

220.65 3941.29

dimensions 500x700 mm and 45 cm deep

Amount

679.24 A

771.82 B

181.74 C

714.29 D

191.04 E

354.81 F 1415.00 10.65 10.65 20.14

DSR-12

Page 2132 of 2298

4349.38 14.56 4363.94 220.65 4584.59

dimensions 600x850 mm and 45 cm deep

Amount

679.24 A

771.82 B

181.74 C

714.29 D

-59.28

191.04 E

DSR-12

Page 2133 of 2298

354.81 F 1415.00 10.65 10.65 20.14 4290.10 13.97 4304.07 211.67 4515.74

Amount

2455.78 A

368.68 B 2824.46 0.00 2824.46 0.00 2824.46

F.P.S. bricks. Amount

2666.27 A

415.42 B 3081.69 0.00 3081.69 0.00

DSR-12

Page 2134 of 2298

3081.69

F.P.S. bricks. Amount

3087.26 A

501.96 B 3589.22 0.00 3589.22 0.00 3589.22

Amount

1926.39 A

254.85 B

420.50

890.50 1961.75 3455.00 108.00 1312.13

DSR-12

Page 2135 of 2298

33.87 167.09

105.24 C

90.83 D

194.45 E

150.50 136.50 741.00 741.00 12689.60 101.18 12790.78 1532.85 14323.63

Amount

226.25 A

562.25 164.73

123.76 B 72.00 38.50

123.50 20.12 1331.11 9.81 1340.92 148.64 1489.56

DSR-12

Page 2136 of 2298

dia. Amount

170.00 1.55 6.50 0.10 0.64 0.09 3.60 6.02 5.46 14.82 5.20 213.98 2.14 216.12 32.42 248.54

dia. Amount

225.00 3.10 9.50 0.15 0.90 0.12 7.20 9.03 8.19 19.76 7.80 290.75 2.91 293.66 44.05 337.71

DSR-12

Page 2137 of 2298

ngth below the pile cap M-35 in cement

Amount

13157.85 A 776.41 3680.00 1470.00 12240.00 132.00 24.08 494.00 31974.34 188.16 32162.50 2850.70 35013.20

ngth below the pile cap M-35 in cement

Amount

16670.10 A 585.12 3680.00 1470.00 16320.00 132.00 24.08 494.00 39375.30 227.05 39602.35 3439.84 43042.19

DSR-12

Page 2138 of 2298

ngth below the pile cap M-35 in cement

Amount

20575.52 A 789.70 3680.00 1470.00 20400.00 132.00 24.08 494.00 47565.30 269.90 47835.20 4088.95 51924.15

ngth below the pile cap M-35 in cement

Amount

24900.31 A 554.10 3680.00 1470.00 20400.00 132.00 24.08 494.00 51654.49 267.54 51922.03 4053.26 55975.29

ngth below the pile cap M-35 in cement

DSR-12

Page 2139 of 2298

Amount

34703.17 A 854.62 3680.00 1470.00 23800.00 132.00 42.14 864.50 65546.43 308.43 65854.86 4672.75 70527.61

ngth below the pile cap M-35 in cement

Amount

41151.03 A 1337.86 3680.00 1470.00 23120.00 132.00 48.16 988.00 71927.05 307.76 72234.81 4662.57 76897.38

ngth below the pile cap M-35 in cement

Amount

DSR-12

Page 2140 of 2298

53312.87 A 1092.72 3680.00 1470.00 22780.00 132.00 54.18 1111.50 83633.27 303.20 83936.47 4593.54 88530.01

ngth below the pile cap M-35 in cement

Amount

83350.50 A 1659.09 3680.00 1470.00 26180.00 220.00 60.20 1235.00 117854.79 345.04 118199.83 5227.40 123427.23

ength below the pile cap M-35 in cement

Amount

DSR-12

Page 2141 of 2298

7391.46 A 496.00 431.88 12240.00 132.00 1596.00 1500.00 510.00 36.12 494.00 24827.46 174.36 25001.82 2641.55 27643.37

ength below the pile cap M-35 in cement

Amount

13157.85 A 697.50 117.80 12240.00 132.00 1596.00 1500.00 510.00 36.12 494.00 30481.27 173.23 30654.50 2624.50 33279.00

ength below the pile cap M-35 in cement

Amount

DSR-12

Page 2142 of 2298

16670.10 A 775.00 343.73 15980.00 1386.00 1596.00 1500.00 510.00 36.12 617.50 39414.45 227.44 39641.89 3445.77 43087.66

ength below the pile cap M-35 in cement

Amount

20575.52 A 868.00 131.05 20400.00 132.00 1596.00 510.00 1500.00 36.12 617.50 46366.19 257.91 46624.10 3907.29 50531.39

ength below the pile cap M-35 in cement

DSR-12

Page 2143 of 2298

Amount

29618.26 A 1023.00 472.97 25500.00 132.00 1596.00 510.00 1500.00 36.12 741.00 61129.35 315.11 61444.46 4773.93 66218.39

ength below the pile cap M-35 in cement

Amount

34703.17 A 930.00 196.05 23800.00 132.00 3150.00 510.00 1500.00 42.14 864.50 65827.86 311.25 66139.11 4715.39 70854.50

DSR-12

Page 2144 of 2298

ength below the pile cap M-35 in cement

Amount

41151.03 A 1085.00 262.08 23460.00 132.00 3150.00 680.00 2000.00 48.16 988.00 72956.27 318.05 73274.32 4818.49 78092.81

ength below the pile cap M-35 in cement

Amount

53312.87 A 1193.50 433.28 22780.00 132.00 3150.00 850.00 2500.00 54.18 1111.50 85517.33 322.04 85839.37 4878.98 90718.35

DSR-12

Page 2145 of 2298

ength below the pile cap M-35 in cement

Amount

83350.50 A 1395.00 884.29 26180.00

220.00 4032.00 1275.00 3750.00 75.25 1235.00 122397.04 390.47 122787.51 5915.55 128703.06

and length below pile cap M-35in cement

Amount

4078.41 A 248.00 612.27 12240.00 66.00 84.00 24.08 494.00 17846.76 137.68 17984.44

DSR-12

Page 2146 of 2298

2085.90 20070.34

and length below pile cap M-35in cement

Amount

7747.93 A 465.00 412.46 12240.00 132.00 84.00 24.08 494.00 21599.47 138.52 21737.99 2098.51 23836.50

and length below pile cap M-35in cement

Amount

9991.58 A 589.00 290.27 12240.00 132.00 84.00

DSR-12

Page 2147 of 2298

24.08 494.00 23844.93 138.53 23983.46 2098.78 26082.24

and length below pile cap M-35in cement

Amount

12581.21 A 620.00 310.14 12240.00 132.00 84.00 24.08 494.00 26485.43 139.04 26624.47 2106.49 28730.96

cified dia. (only the qnty of extra bulbs are

Amount

172.99 A 9.30 680.00

DSR-12

Page 2148 of 2298

22.00 42.00 6.02 247.00 1179.31 10.06 1189.37 152.46 1341.83

cified dia. (only the qnty of extra bulbs are

Amount

330.26 A 18.60 680.00 22.00 42.00 6.02 247.00 1345.88 10.16 1356.04 153.87 1509.91

cified dia. (only the qnty of extra bulbs are

Amount

424.62 A 24.80 680.00 22.00 42.00

DSR-12

Page 2149 of 2298

6.02 247.00 1446.44 10.22 1456.66 154.81 1611.47

cified dia. (only the qnty of extra bulbs are

Amount

534.70 A 31.00 680.00 22.00 84.00 6.02 247.00 1604.72 10.70 1615.42 162.11 1777.53

ength below the pile cap in M-35 cement

Amount

13157.85 A 18220.24 B -11806.81 C 121.60 658.58 3680.00 1470.00

DSR-12

Page 2150 of 2298

13300.00 555.00 36.12 741.00 40133.58 205.62 40339.20 3115.19 43454.39

ength below the pile cap in M-35 cement

Amount

16670.10 A 23083.81 B -14958.43 C 121.60 658.58 3680.00 1470.00 13300.00 555.00 325.08 2662.66 47568.40 227.73 47796.13 3450.10 51246.23

ength below the pile cap in M-35 cement

Amount

DSR-12

Page 2151 of 2298

20575.52 A 28491.81 B -18462.85 C 121.60 658.58 3680.00 1470.00 13300.00 555.00 36.12 741.00 51166.78 205.62 51372.40 3115.19 54487.59

ength below the pile cap in M-35 cement

Amount

24900.31 A 34480.54 B -22343.57 C 121.60 658.58 3680.00 1470.00 13300.00 555.00 36.12 741.00 57599.58 205.62 57805.20

DSR-12

Page 2152 of 2298

3115.19 60920.39

ength below the pile cap in M-35 cement

Amount

57034.81 A 78978.57 B -51178.54 C 121.60 658.58 3680.00 1470.00 13300.00 555.00 36.12 741.00 105397.14 205.62 105602.76 3115.19 108717.95

ength below the pile cap in M-35 cement

Amount

82302.07 A 113967.24 B -73851.39 C 121.60

DSR-12

Page 2153 of 2298

658.58 3680.00 1470.00 13300.00 555.00 36.12 741.00 142980.22 205.62 143185.84 3115.19 146301.03

t for initial test: Upto 50 ton capacity pile.

Amount 33200.00 33200.00 332.00 33532.00 5029.80 38561.80

est for initial test: Above 50 and upto 100

Amount 15000.00 15000.00 150.00 15150.00 2272.50 17422.50

st for routine test: Upto 50 tonne capacity

Amount 40300.00

DSR-12

Page 2154 of 2298

40300.00 403.00 40703.00 6105.45 46808.45

st for routine test: Above 50 and upto 100

Amount 23000.00

23000.00 230.00 23230.00 3484.50 26714.50

piles. Upto 50 tonne capacity rate per test

Amount 48500.00 48500.00 485.00 48985.00 7347.75 56332.75

piles. Upto 50 tonne capacity rate for test

Amount 29500.00 29500.00 295.00 29795.00 4469.25 34264.25

DSR-12

Page 2155 of 2298

Amount 15000.00 15000.00 150.00 15150.00 2272.50 17422.50

Amount 23000.00

23000.00 230.00 23230.00 3484.50 26714.50

Amount 29500.00 29500.00 295.00 29795.00 4469.25 34264.25

DSR-12

Page 2156 of 2298

Amount 15000.00 15000.00 150.00 15150.00 2272.50 17422.50

Amount 23500.00 23500.00 235.00 23735.00 3560.25 27295.25

accordance with IS 14893 ....

Amount

300.00 70.00 30.00 150.00 50.00 600.00 6.00 606.00 90.90 696.90

Amount

DSR-12

Page 2157 of 2298

9244.40 72.00 1680.80 77.48

602.00 260.00 247.00 13.00 149.00 12345.68 123.46 12469.14 1870.37 14339.51

al drawings and the directions of Engineer-

Amount

DSR-12

Page 2158 of 2298

9244.40 72.00

2689.28 77.48

602.00 260.00 247.00 13.00 149.00 13354.16 133.54 13487.70 2023.16 15510.86

: Polyester Powder coated aluminium

Amount

9244.40

DSR-12

Page 2159 of 2298

72.00 2941.40 77.48

602.00 260.00 247.00 13.00 149.00 13606.28 136.06 13742.34 2061.35 15803.69

Amount

4763.00 200.00

92.00 866.00 46.49 58.75

DSR-12

Page 2160 of 2298

301.00 260.00 123.50 104.00 60.20 123.50 74.50 7072.94 70.73 7143.67 1071.55 8215.22

rawings - : For shutters of doors, windows

Amount

4763.00 200.00

92.00 1385.60

DSR-12

Page 2161 of 2298

46.49 58.75

301.00 260.00 123.50 104.00

60.20 123.50 74.50 7592.54 75.93 7668.47 1150.27 8818.74

er coated aluminium Amount

4763.00 200.00

92.00

DSR-12

Page 2162 of 2298

1515.50 46.49 58.75

301.00 260.00 123.50 104.00 60.20 123.50 74.50 7722.44 77.22 7799.66 1169.95 8969.61

orative lamination one side and balancing

Amount

5071.50 20.34 40.68 245.70 247.00 5625.22 56.25 5681.47 852.22 6533.69

es. Amount

5292.00 20.34 40.68

DSR-12

Page 2163 of 2298

245.70 247.00 5845.72 58.46 5904.18 885.63 6789.81

s panes of 4.0mm thickness

Amount

341.00 3.61 150.00 62.79 56.81 10.27 624.48 6.24 630.72 94.61 725.33

s panes of 5.5mm thickness

Amount

495.00 4.96 150.00 62.79 56.81 10.27 779.83 7.80 787.63

DSR-12

Page 2164 of 2298

118.14 905.77

Amount

341.00 4.96 150.00 62.79 56.81 10.27 625.83 6.26 632.09 94.81 726.90

Amount 1525.00 19.37 38.74 9.03 A

24.08 21.84 2.73 41.99 1682.78 16.74 1699.52 253.57 1953.09

DSR-12

Page 2165 of 2298

Amount 1675.00 19.37 38.74 9.03 A

24.08 21.84 2.73 41.99 1832.78 18.24 1851.02 276.30 2127.32

Amount

1467.84 1.16 240.00

DSR-12

Page 2166 of 2298

426.88 19.37 19.37

192.64 158.08 19.37 2544.71 25.45 2570.16 385.52 2955.68

Amount

644.00

66.50 1104.00 7.75 105.35 66.69 1994.29 19.94 2014.23 302.13 2316.36

eiling:- Anodised aluminium sheet 2.5 mm

Amount

DSR-12

Page 2167 of 2298

1543.50 294.00 8.40 3.00 600.00 9.69 107.02 96.82 31.96 2694.39 26.94 2721.33 408.20 3129.53

ling:- Powder coated aluminium sheet 2.5

Amount

1543.50 470.40 8.40 3.00 600.00 9.69 107.02 96.82 31.96 2870.79 28.71 2899.50 434.93 3334.43

DSR-12

Page 2168 of 2298

ather silocon sealent: Upto 5 mm depth, 5

Amount 26.71 3.10 3.87 30.99 64.67 0.65 65.32 9.80 75.12

Amount 2054.50 -1643.60 410.90 4.11 415.01 62.25 477.26

s and ventilators. Amount 1082.50 -866.00 216.50 2.17 218.67 32.80 251.47

ition etc with 6mm thick clear float glass alant etc.

Amount

DSR-12

Page 2169 of 2298

2519.00 9.92 150.00 62.79 113.62 10.27 2865.60 28.66 2894.26 434.14 3328.40

Amount 1680.00 11.60 4.07 38.22 34.58 1768.47 17.68 1786.15 267.92 2054.07

Amount 1890.00 11.60 4.07 38.22 34.58 1978.47 19.78 1998.25 299.74 2297.99

DSR-12

Page 2170 of 2298

Amount 2360.00 11.60 4.07 38.22 34.58 2448.47 24.48 2472.95 370.94 2843.89

Amount 4370.00 11.60 4.07 38.22 34.58 4458.47 44.58 4503.05 675.46 5178.51

Amount 7930.00 11.60 4.07 38.22 34.58

DSR-12

Page 2171 of 2298

8018.47 80.18 8098.65 1214.80 9313.45

Aluminium tubular Amount

3594.80 653.60 6.59 2.32 37.63 4294.94 42.95 4337.89 650.68 4988.57

oated Aluminium tubular Amount

3594.80 1045.76 6.59 2.32 37.63 4687.10 46.87 4733.97 710.10 5444.07

DSR-12

Page 2172 of 2298

Powder coated Aluminium tubular

Amount

3594.80 1143.80 6.59 2.32 37.63 4785.14 47.85 4832.99 724.95 5557.94

Amount 250.00

51.17 5.42 306.59 3.07 309.66 46.45 356.11

Amount

DSR-12

Page 2173 of 2298

942.92 8.00 171.44 7.75

12.04 10.40 4.94 2.60 7.75 1167.84 11.68 1179.52 176.93 1356.45

m. Amount 400.00 12.80 18.06 4.07 434.93 4.35 439.28 65.89 505.17

minium. Amount 410.00 12.80 18.06 4.07

DSR-12

Page 2174 of 2298

444.93 4.45 449.38 67.41 516.79

ated Aluminium Amount 420.00 12.80 18.06 4.07 454.93 4.55 459.48 68.92 528.40

Amount 490.00 12.80 18.06 4.07 524.93 5.25 530.18 79.53 609.71

Amount 540.00 12.80 18.06

DSR-12

Page 2175 of 2298

4.07 574.93 5.75 580.68 87.10 667.78

Amount 590.00 12.80 18.06 4.07 624.93 6.25 631.18 94.68 725.86

shade according to IS: 1868 with minimum

Amount

3000.00 16.39

150.50 65.00 61.75 13.00 37.25 3343.89 33.44 3377.33 506.60 3883.93

DSR-12

Page 2176 of 2298

g top & bottom pivot & spring type fixing

Amount

4158.00 12.20 7.94 3906.18 A

245.70 222.30 1.68 8554.00 46.48 8600.48 704.15 9304.63

epth below ground level for under ground

Amount

1036.38 1925.00

49.84

1160.75

360.00 5.61

DSR-12

Page 2177 of 2298

171.50 84.00 7.01 327.60 247.00 247.00 294.84 266.76 117.00 9.30 6309.59 63.10 6372.69 955.90 7328.59

pecified stone slab 20 to 25 mm thick with

Amount

1925.00 49.84

1550.00 24.14 2337.90 A

222.50

819.00 741.00 247.00 27.12 7943.50 56.06 7999.56

DSR-12

Page 2178 of 2298

849.25 8848.81

hen ... Amount 220.00 3.43

928.60 269.78 251.94 286.00 18.79 629.00 1.49 310.00 19.37

90.00 54.60 328.51 18.06 10.85 3440.42 34.40 3474.82 521.22 3996.04

pansion joints: Serrated with central bulb

Amount 39000.00 494.00 38.74 39532.74 395.33 39928.07

DSR-12

Page 2179 of 2298

5989.21 45917.28

ansion joints: Dumb bell with central bulb

Amount 35100.00 494.00 38.74 35632.74 356.33 35989.07 5398.36 41387.43

ansion joints: Kickers (320 mm wide, 5 mm

Amount 36000.00 494.00 38.74 36532.74 365.33 36898.07 5534.71 42432.78

cement slurry mixed with water proofing

Amount

60.00 0.93

DSR-12

Page 2180 of 2298

635.00 574.00 494.00 65.00 23.24 1852.17 18.52 1870.69 280.60 2151.29

r proofing cement compound Consisting of

Amount

100.00 1.56

1230.63

429.00 574.00 247.00 65.00 34.87 2682.06 26.82 2708.88 406.33 3115.21

m and minimum thickness at khurra as 65

DSR-12

Page 2181 of 2298

Amount 137.50 701.11

446.50 89.51 1564.98 432.25 72.80 15.05 13.65 10.40 61.75 20.34 137.50 49.40 1866.80 A

125.00

682.50

98.28 88.92 20.34 147.42 133.38 117.00 7032.38 51.66 7084.04 782.59 7866.63

Amount 3219.00

1650.00 162.00

DSR-12

Page 2182 of 2298

15.77 14.19 69.60 1.74 200.48

589.68 800.28 54.18 10.07 6786.99 67.87 6854.86 1028.23 7883.09

I. Amount 4551.00

3300.00

23.91 162.00 15.77 98.40 2.46 200.48

884.52 1200.42 60.20 10.07 10509.23 105.09 10614.32 1592.15 12206.47

DSR-12

Page 2183 of 2298

en felt). Amount 4828.50

3630.00

24.09 162.00 15.77 104.40 2.61 200.48

1179.36 1600.56 108.36 10.07 11866.20 118.66 11984.86 1797.73 13782.59

tumen felt). Amount 4828.50 3630.00

29.26 162.00 15.77 104.40 2.61 200.48

1179.36 1600.56 108.36 10.07

DSR-12

Page 2184 of 2298

11871.37 118.71 11990.08 1798.51 13788.59

Amount 96.00 2.13 46.41 41.99 20.14 206.67 2.07 208.74 31.31 240.05

m. Amount 54.00 5.26 32.15 10.07 101.48 1.01 102.49 15.37 117.86

m. Amount 72.00 7.01 40.10 10.07 129.18

DSR-12

Page 2185 of 2298

1.29 130.47 19.57 150.04

Amount 703.50 231.00 77.96 504.00 39.42 1600.00 24.92 402.61 182.00 30.10 21.31 56.00 21.00 68.18 3962.00 39.62 4001.62 600.24 4601.86

Amount 4145.53 287.00 494.00 130.00 1235.00 17.43 6308.96 63.09 6372.05 955.81 7327.86

DSR-12

Page 2186 of 2298

Amount 3485.41 287.00 494.00 130.00 1235.00 16.08 5647.49 56.47 5703.96 855.59 6559.55

dified memberane manufactured by Bengal

Amount

3894.00 480.00 3996.00 10.51 11.62 69.60 1.74 200.48

589.68 800.28 54.18 10.07 10118.16 101.18 10219.34 1532.90 11752.24

DSR-12

Page 2187 of 2298

ied polyme- ric memberane manufactured m thick.

Amount

3267.00 480.00 2664.00 7.36 11.62 69.60 1.74 200.48

431.34 585.39 39.13 10.07 7767.73 77.68 7845.41 1176.81 9022.22

ater proofing memberane,with glass fibre erse 350/300 tear strength 60/80N. 2 mm

Amount

5511.00 852.00 1.05 11.62 357.00 73.80 650.16 54.18 800.28 34.87 8345.96 83.46 8429.42 1264.41

DSR-12

Page 2188 of 2298

9693.83

erane,with glass fibre matt manufactured rength 60/80N. 3 mm thick.

Amount

6831.00 852.00 1.05 11.62 357.00 73.80 650.16 54.18 800.28 34.87 9665.96 96.66 9762.62 1464.39 11227.01

ater proofing memberane,with glass fibre

Amount

8085.00 852.00 1.05 11.62 357.00 73.80 650.16 54.18 800.28 34.87 10919.96

DSR-12

Page 2189 of 2298

109.20 11029.16 1654.37 12683.53

ster of thickness 1.0 to 1.25 mm by Bhutan

Amount

1008.00 11.62 129.43 12.04 160.55 69.73 1391.37 13.91 1405.28 210.79 1616.07

Amount 175.37 4.07 86.45 265.89 2.66 268.55 40.28 308.83

Amount

43.72

DSR-12

Page 2190 of 2298

41.25 30.00 109.50 224.47 2.24 226.71 34.01 260.72

Amount 95.22 90.00 185.22 1.85 187.07 28.06 215.13

Amount 95.22 19.76 4.07 119.05 1.19 120.24 18.04 138.28

Amount 95.22 32.11 4.07 131.40 1.31 132.71 19.91

DSR-12

Page 2191 of 2298

152.62

Amount 95.22 41.99 4.07 141.28 1.41 142.69 21.40 164.09

Amount 49.40 2.13 51.53 0.52 52.05 7.81 59.86

Amount 81.51 81.51 4.07 167.09 1.67 168.76 25.31 194.07

DSR-12

Page 2192 of 2298

Amount 123.50 2.13 125.63 1.26 126.89 19.03 145.92

Amount

17.29 0.77 18.06 0.18 18.24 2.74 20.98

Amount 61.75 61.75 123.50 1.24 124.74 18.71 143.45

wa 15 cm apart. Amount 197.60 395.20 10.07 602.87 6.03 608.90

DSR-12

Page 2193 of 2298

91.34 700.24

ws 7.5 cm apart. Amount

197.60 247.00 10.07 454.67 4.55 459.22 68.88 528.10

udge or manure. Amount

666.90 494.00 4.07 1164.97 11.65 1176.62 176.49 1353.11

all weeds and other growth with roots by

Amount 370.50 185.25

247.00 123.50

526.11

DSR-12

Page 2194 of 2298

261.82

81.51 81.51 4.07 49.40 2.13 123.50 2.13 10.07 2068.50 20.69 2089.19 313.38 2402.57

nching refilling the excavated earth after

Amount 444.60 308.75 753.35 7.53 760.88 114.13 875.01

1.2 m & 1.2 m deep.

Amount

177.86 A 7.75 185.61 0.08 185.69 1.17 186.86

DSR-12

Page 2195 of 2298

90 cm dia & 90 cm deep.

Amount

74.54 A 4.84 79.38 0.05 79.43 0.73 80.16

60 cm dia & 60 cm deep.

Amount

22.23 A 2.13 24.36 0.02 24.38 0.32 24.70

45 cm dia & 45 cm deep.

Amount

9.15 A 1.31 10.46 0.01 10.47 0.20

DSR-12

Page 2196 of 2298

10.67

t 1.2 m above GL. With F.P.S. bricks.

Amount

563.50 53.73 23.63 68.25 61.75 6.20 777.06 7.77 784.83 117.72 902.55

.S. flats rivetted to flat iron rings.

Amount

1218.00 60.05 12.01 2.26 546.00 247.00

DSR-12

Page 2197 of 2298

20.18 A 95.35 B 2200.85 20.85 2221.70 315.93 2537.63

pplied free by the Deptt : A coat of coal tar.

Amount 19.95 40.10 4.07 35.49 17.29 2.13

53.03 A 172.06 1.19 173.25 18.03 191.28

supplied free by the Deptt : Two or more

Amount

191.28 A

44.76 B

116.36 C -53.03 D 299.37 0.00

DSR-12

Page 2198 of 2298

299.37 0.00 299.37

supplied free by the Deptt : A coat of coal

Amount 20.14 100.14 4.07 51.87 24.70 2.13

54.60

81.75 A 339.40 2.58 341.98 39.03 381.01

pplied free by the Deptt :

Amount 381.01 A

69.00 B

179.39 C

-81.75 D 547.65 0.00 547.65

DSR-12

Page 2199 of 2298

0.00 547.65

class designation 7.5

Amount 145.00 11.68 13.65 12.35 20.14 202.82 2.03 204.85 30.73 235.58

Amount 41.99 19.76 61.75 0.62 62.37 9.36 71.73

Amount 86.45 86.45 172.90 1.73 174.63 26.19 200.82

DSR-12

Page 2200 of 2298

Amount 106.21 86.45 192.66 1.93 194.59 29.19 223.78

Amount 130.91 106.21 237.12 2.37 239.49 35.92 275.41

Amount 41.99 53.46 95.45 0.95 96.40 14.46 110.86

d carriage upto 1 km (Cow dung manure

Amount 47.00 95.22 142.22

DSR-12

Page 2201 of 2298

1.42 143.64 21.55 165.19

round level and 0.40 metre below ground

Amount

1436.83 A 1.68

82.42 B

17.29 1538.22 0.19 1538.41 2.87 1541.28

DSR-12

Page 2202 of 2298

round level and 0.50 metre below ground

Amount

2306.91 A

95.35 B

17.29 2419.55 0.17 2419.72 2.62 2422.34

h in layers not exceeding 20 cm in depth,

Amount 543.40 889.20 104.00

DSR-12

Page 2203 of 2298

2.03 1538.63 15.39 1554.02 233.10 1787.12

nominal mix 1:2:4 - Top inside dia 35 cm,

Amount

26.68 A

47.04 B 11.79 C 63.41 D 148.92 0.00 148.92 0.00 148.92

nominal mix 1:2:4 - Top inside dia 30 cm,

Amount

DSR-12

Page 2204 of 2298

22.71 A

32.93 B 8.31 C 45.06 D 109.01 0.00 109.01 0.00 109.01

ominal mix 1:2:4 .. Top inner width 35 cm,

Amount

26.68 A

57.86 B

DSR-12

Page 2205 of 2298

15.03 C 80.10 D 179.67 0.00 179.67 0.00 179.67

escribed in IS: 2800 (part I) .. .. All types of

Amount 7500.00 685.76

988.00 301.00 600.00 494.00 247.00 10815.76 108.16 10923.92 1638.59 12562.51

escribed in IS: 2800 (part I) .. .. All types of

Amount 7500.00 685.76

988.00 301.00 600.00 494.00 247.00 10815.76

DSR-12

Page 2206 of 2298

108.16 10923.92 1638.59 12562.51

escribed in IS: 2800 (part I) .. .. All types of

Amount 7500.00 685.76

988.00 301.00 600.00 494.00 247.00 10815.76 108.16 10923.92 1638.59 12562.51

scribed in IS: 2800 (part I) .. .. Rocky strata

Amount 6750.00 247.74 685.76

988.00 301.00 600.00 185.25 741.00 204.75 247.00 10950.50

DSR-12

Page 2207 of 2298

109.51 11060.01 1659.00 12719.01

scribed in IS: 2800 (part I) .. .. Rocky strata

Amount 6750.00 330.32 685.76

988.00 301.00 600.00 247.00 988.00 204.75 247.00 11341.83 113.42 11455.25 1718.29 13173.54

scribed in IS: 2800 (part I) .. .. Rocky strata

Amount 6750.00 660.64 685.76

988.00 301.00 600.00 296.40

DSR-12

Page 2208 of 2298

1976.00 204.75 247.00 12709.55 127.10 12836.65 1925.50 14762.15

scribed in IS: 2800 (part I) ..All types of soil

Amount 7500.00 685.76

988.00 301.00 600.00 494.00 247.00 10815.76 108.16 10923.92 1638.59 12562.51

cribed in IS: 2800 (part I) ..All types of soil -

Amount 7500.00 685.76

988.00 301.00 600.00 494.00 247.00 10815.76

DSR-12

Page 2209 of 2298

108.16 10923.92 1638.59 12562.51

cribed in IS: 2800 (part I) ..All types of soil -

Amount 7500.00 685.76

988.00 301.00 600.00 494.00 247.00 10815.76 108.16 10923.92 1638.59 12562.51

scribed in IS: 2800 (part I), .. .. Rocky strata

Amount 6750.00 412.90 685.76

988.00 301.00 600.00 247.00 1235.00 191.10 247.00 11657.76

DSR-12

Page 2210 of 2298

116.58 11774.34 1766.15 13540.49

scribed in IS: 2800 (part I), .. .. Rocky strata

Amount 6750.00 495.48 685.76

988.00 301.00 600.00 247.00 1482.00 204.75 247.00 12000.99 120.01 12121.00 1818.15 13939.15

scribed in IS: 2800 (part I), .. .. Rocky strata

Amount 7125.00 660.64 685.76

988.00 301.00 600.00 296.40

DSR-12

Page 2211 of 2298

1976.00 273.00 247.00 13152.80 131.53 13284.33 1992.65 15276.98

PVC medium well casing (CM) pipe .. - 100

Amount 38500.00 159.56

123.50 123.50 38906.56 389.07 39295.63 5894.34 45189.97

PVC medium well casing (CM) pipe .. - 150

Amount 46000.00 159.56

123.50 123.50 15.00 46421.56 464.22 46885.78 7032.87 53918.65

DSR-12

Page 2212 of 2298

PVC medium well casing (CM) pipe .. - 200

Amount 83475.00 259.56

123.50 123.50 83981.56 839.82 84821.38 12723.21 97544.59

PVC medium well screen (RMS) pipes .. ..

Amount 39000.00 159.56

123.50 123.50 15.00 39421.56 394.22 39815.78 5972.37 45788.15

PVC medium well screen (RMS) pipes .. ..

Amount 46515.00 159.56

DSR-12

Page 2213 of 2298

123.50 123.50 15.00 46936.56 469.37 47405.93 7110.89 54516.82

PVC medium well screen (RMS) pipes .. ..

Amount 84000.00 259.56

123.50 123.50 20.00 84526.56 845.27 85371.83 12805.77 98177.60

arge pit, in the required thickness ..

Amount 332.00 61.75 1.49 395.24 3.95 399.19 59.88 459.07

DSR-12

Page 2214 of 2298

ge pit, over the existing layer of boulders ..

Amount 650.00 61.75 1.49 713.24 7.13 720.37 108.06 828.43

rge pit.. Amount 625.00 61.75 1.49 688.24 6.88 695.12 104.27 799.39

ravel fine/ medium/ coarse ..

Amount 650.00 74.10 1.49 725.59 7.26 732.85 109.93 842.78

f strength not less than M-25, of size 1000

DSR-12

Page 2215 of 2298

Amount

750.00 22.35 772.35 7.72 780.07 117.01 897.08

tric Resistance Welded) FE 410 mild steel um wall thickness 5.00 mm

Amount 22500.00 825.00 57.44

461.64 A

333.45 150.50 24328.03 238.66 24566.69 3615.76 28182.45

tric Resistance Welded) FE 410 mild steel um wall thickness 5.00 mm

Amount 31260.00 1000.00 95.74

671.52 A

DSR-12

Page 2216 of 2298

345.80 150.50 33523.56 328.52 33852.08 4977.08 38829.16

tric Resistance Welded) FE 410 mild steel um wall thickness 5.40 mm

Amount 37500.00 1250.00 155.73

902.34 A

333.45 150.50 40292.02 393.90 40685.92 5967.54 46653.46

d) FE 410 plain slotted mild steel threaded

Amount 22500.00 825.00 1350.00 57.44

461.64 A

333.45

DSR-12

Page 2217 of 2298

150.50 25678.03 252.16 25930.19 3820.28 29750.47

d) FE 410 plain slotted mild steel threaded

Amount 31260.00 1000.00 1799.99 95.74

671.52 A

345.80 150.50 35323.55 346.52 35670.07 5249.78 40919.85

d) FE 410 plain slotted mild steel threaded

Amount 37500.00 1799.99 1250.00 155.73

902.34 A

345.80

DSR-12

Page 2218 of 2298

150.50 42104.36 412.02 42516.38 6242.11 48758.49

blish maximum rate of usable water yield

Amount 1800.00 1981.92 3781.92 37.82 3819.74 572.96 4392.70

of bore well housing/ casing pipe..100 mm

Amount

120.00 6.00 126.00 1.26 127.26 19.09 146.35

of bore well housing/ casing pipe..150 mm

Amount

150.00 7.50 157.50 1.58

DSR-12

Page 2219 of 2298

159.08 23.86 182.94

of bore well housing/ casing pipe..200 mm

Amount

180.00 9.00 189.00 1.89 190.89 28.63 219.52

ubewell as per IS: 2800 (part I) - 100 mm

Amount

934.44 A 37.25 971.69 0.37 972.06 5.64 977.70

ubewell as per IS: 2800 (part I) - 150 mm

Amount

981.16 A 44.70 1025.86

DSR-12

Page 2220 of 2298

0.45 1026.31 6.77 1033.08

ubewell as per IS: 2800 (part I) - 200 mm

Amount

1121.33 A 44.70 1166.03 0.45 1166.48 6.77 1173.25

mbly of tubewell as per IS:2800 (part I) -

Amount 140.00 7.45 147.45 1.47 148.92 22.34 171.26

mbly of tubewell as per IS:2800 (part I) -

Amount 170.00 7.45 177.45 1.77 179.22 26.88

DSR-12

Page 2221 of 2298

206.10

mbly of tubewell as per IS:2800 (part I) -

Amount 200.00 7.45 207.45 2.07 209.52 31.43 240.95

re and precaution, by mechanical / manual

Amount 130.91 19.76 18.20 2.13 171.00 1.71 172.71 25.91 198.62

building/structure, upto 25 metre height,

Amount

54.00

3840.96

DSR-12

Page 2222 of 2298

118.35

43.20

140.25

1528.00

2094.00

471.42

4665.50 7657.00

DSR-12

Page 2223 of 2298

1542.15 22154.83 221.55 22376.38 3356.46 25732.84

e, fungus, monkey beats, vegetable growth

Amount 16.40

27.34

54.60 49.40 26.00

1.49 14.15 109.20 197.60 26.00 522.18 5.22 527.40 79.11 606.51

ntachlorophenate, of reputed brand and

Amount 63.00 68.25 61.75 32.50 225.50 2.26 227.76 34.16 261.92

DSR-12

Page 2224 of 2298

dust mortar in the ratio of 1:1.5:1/2 {One

Amount 46.10 264.04 338.39 241.80 6.00 896.33 8.96 905.29 135.79 1041.08

e dust mortar in the ratio of 1:1.5:1/2 {One

Amount 46.10

264.04 338.39 241.80 6.00 896.33 8.96 905.29 135.79 1041.08

y of India/ Engineer-in-charge ..

Amount 1017.17

DSR-12

Page 2225 of 2298

40.95 37.05 8.94 1104.11 11.04 1115.15 167.27 1282.42

mical as approved by Archaeological Survey

Amount 1586.25 810.00 273.00 247.00 8.94 2925.19 29.25 2954.44 443.17 3397.61

DSR-12

Page 2226 of 2298

BASIC RATES (AS PER DSR-2012)

Sl.No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

DSR-12

Rate Code Description of Rate MATERIALS : 0001 Hire charges of Coaltar Boiler 900 to 1400 litres 0002 Hire charges of Concrete Mixer 0.14 cubic metre 0004 Production cost of concrete by batch mix plant. 0005 Hire charges of Diesel Truck - 9 tonne 0006 Hire charges of Spraying machine including electric charges 0007 Hire charges of Coaltar Sprayer Pumping charges of concrete including Hire charges of pump, piping 0009 work & accessories etc. 0010 Hire charges of Derrick monkey rope 0011 Hire charges of Pump set of capacity 4000 litres/hour. 0012 Vibrator (Needle type 40mm) 0013 Machine for rubbing of floors 0014 Front end loader 0016 Mastic Cooker 0017 Hire and running charges of tipper 0018 Hire and running charges of loader. 0019 Hand Grinder For mirror polish 0020 Hydraulic Excavator (3D) with driver and fuel. 0021 Pin vibrator 0022 Surface Vibrator 0023 Hire charges of Bitumen Concrete Mixer Hire and running charges of hydraulic piling rig with power unit etc. 0024 including complete a 0025 Hire and running charges of light crane. 0026 Hire and running charges of bentonite pump. Hire and running charges of vibrating pile driving hammer complete 0027 with power unit and acc 0028 Hire and running charges of crane 20 tonne capacity. 0029 Carriage of concrete by transit mixer. 0033 Paint applicator. 0037 Mobile crane. 0038 Tractor with ripper attachment. 0039 Tractor with trolley. Air compressor 250 cfm with two leads for pneumatic cutters/ 0040 hammers 0041 Joint cutting machine with 2-3 blades 0050 Issue Rate of Cement 0052 Front end loader 1 cum bucket capacity (incl POL) 0053 Tipper -5 Cum 0054 Vibratory roller 8 to 10 tonne 0055 Smooth Wheeled Roller 8 to 10 tonne 0056 Tandem Road Roller 0057 Water Tanker 5 to 6 KL capacity 0058 Air compressor 0059 Wet Mix Plant 60 TPH 0061 Emulsion Pressure Distributor @ 1750 sqm per hour 0062 Hot mix Plant -120 TPH capacity 0063 Hot mix Plant 100 TPH Capacity 0064 Paver finisher Hydrostatic with sensor control 100 TPH 0065 Paver finisher Mechanical 100 TPH

Unit Day Day cum Day Day Day cum Day Day Day Day Day Day Day Day Day Day Day Day Day per day per day per day per day per day km/ cum per day per day per day per day day per day One hour hour tonne km hour hour hour One hour One hour One hour One hour Hours hour Hours One hour

Local Market Rates : 2227 of 2298

DSR-12

47 48 49 50

0066 0069 0070 0075

51 52 53 54 55

0076 0081 0222 0223 0224

56 57

0225 0226

58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87

0227 0228 0229 0230 0231 0232 0233 0234 0235 0236 0237 0285 0286 0287 0291 0292 0293 0294 0295 0296 0297 0298 0302 0303 0304 0305 0308 0309 0310 0312

88 89 90 91 92 93 94 95 96 97

0313 0314 0316 0317 0318 0322 0324 0325 0326 0328

Batching and Mixing Plant @ 75 cum per hour Generator 250 kVA Generator 100 KVA/125 KVA Road sweeper (Mechamical Broom) @ 1250 sqm per hour Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output Pile Integrity testing equipment Seam bolts and nuts 6 mm dia and 25 mm long Non - Asbestos fibre cement corrugated sheet 6mm thick. Non - Asbestos fibre cement close fitting adjustable ridge. Non - Asbestos fibre cement corrugate serrated adjustable ridge.

One hour Hours One hour One hour One hour

Non - Asbestos fibre cement plain wing adjustable ridge. Non - Asbestos fibre cement unserrated adjustable ridge for hips.

metre metre

Non - Asbestos fibre cement corrugated apron piece. Non - Asbestos fibre cement eaves filler piece. Non - Asbestos fibre cement north light curves. Non - Asbestos fibre cement ventilator curves. Non - Asbestos fibre cement barge boards 6 mm thick. Non - Asbestos fibre cement ridge finial . Non - Asbestos fibre cement special north light curves. Non - Asbestos fibre cement S type louvers. Non - Asbestos multi purpose fibre cement board 6mm thick. Non - Asbestos multi purpose fibre cement board 8mm thick. Brick Aggregate (Single size) : 63 mm nominal size Brick Aggregate (Single size) : 50 mm nominal size Brick Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 63 mm nominal size Stone Aggregate (Single size) : 50 mm nominal size Stone Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 25 mm nominal size Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Safeda ballies 125 mm diameter Cow Dung Bajri Bamboo 25 mm dia 2.5 metre long Bhusa Paving bitumen S-90 of approved quality Bitumen emulsion Bitumen grade PMB - 40 Blown type petroleum bitumen of penetration 85/25 of approved quality Bitumen hot sealing compound : grade A Bitumen solution primer of approved quality Premoulded joint filler 12 mm thick Bitumen felt fibre base (vegetable or animal):Type 2 grade 1 Bitumen felt :Type 3 grade 1 Coal Tar Blasting powder Blasting fuse (fuse wire) White face insulating board:12 mm thick

metre each metre each metre pair each each sqm sqm cum cum cum cum cum cum cum cum cum cum cum metre One Cum cum score quintal tonne tonne M.T. tonne

per day 10 Nos sqm metre metre

kilogram litre sqm sqm sqm litre kilogram each sqm

Local Market Rates : 2228 of 2298

DSR-12

98 99

0332 0336

100

0339

101

0341

102

0346

103

0347

104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140

0348 0362 0364 0365 0367 0368 0370 0373 0378 0379 0380 0381 0382 0383 0384 0385 0386 0387 0388 0389 0390 0391 0392 0393 0394 0400 0401 0402 0403 0404 0405 0406 0408 0409 0410 0411 0412

141

0413

142 143 144 145

0414 0417 0418 0419

Natural colour insulating board:12 mm thick sqm Flame retardant face insulating board: 12 mm thick sqm Flame retardant face insulating, Impregnated fibre board 12 mm thick sqm Flat pressed 3 layer particle board (medium density) Grade I :12 mm thick Extra for veneered particle board with : Teak veneering on one side and commercial veneere Extra for veneered particle board with : Commercial veneering on both side Extra for veneered particle board with : Teak veneering on both sides

sqm

Brick bats Wire brush Soft brush Portland Cement White Cement Coal (steam) Cramp Gun metal 25x6x300 mm Brass butt hinges (light/ordinary type) : 125x70x4 mm Brass butt hinges (light/ordinary type) : 100x70x4 mm Brass butt hinges (light/ordinary type) : 75x40x2.5 mm Brass butt hinges (light/ordinary type) : 50x40x2.5 mm Brass butt hinges (heavy type) : 125x85x5.5 mm(.70)kg Brass butt hinges (heavy type) : 100x85x5.5 mm(.56)kg Brass butt hinges (heavy type) :75x65x4.0 mm(.20)kg Brass parliamentary hinges 150x125x27x5 mm Brass parliamentary hinges 125x125x27x5 mm Brass parliamentary hinges 100x125x27x5 mm Brass parliamentary hinges75x100x20x3.2 mm Brass single acting spring hinges 150 mm Brass single acting spring hinges 125 mm Brass single acting spring hinges 100 mm Brass double acting spring hinges 150 mm Brass double acting spring hinges 125 mm Brass double acting spring hinges 100 mm Brass tower bolt (barrel type) 250x10 mm Brass tower bolt (barrel type) 200x10 mm Brass tower bolt (barrel type) 150x10 mm Brass tower bolt (barrel type) 100x10 mm Brass flush bolt 250 mm Brass flush bolt 150 mm Brass flush bolt 100 mm Brass handles 125 mm with plate 175x32 mm Brass handles 100 mm with plate 150x32 mm Brass handles75 mm with plate 125x32 mm Brass door latch 300x16x5 mm (0.380 kg) Brass door latch 250x16x5 mm (0.350 kg) Brass mortice latch and lock 100x65 mm with6 levers and a pair of brass lever handles Brass mortice latch 100x65mm with a pair of brass lever handles

cum each each tonne tonne quintal each 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each each each each each each each each each each each each each each each each each each each

Brass 150 mm floor door stopper (0.357kg) Brass hard drawn hooks and eyes 300 mm Brass hard drawn hooks and eyes 250 mm

each 10 Nos 10 Nos

sqm sqm sqm

each

Local Market Rates : 2229 of 2298

146 147 148 149

0420 0421 0422 0423

150

0424

151

0425

152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170

0426 0427 0428 0429 0430 0431 0432 0433 0438 0442 0444 0445 0446 0447 0449 0450 0451 0452 0453

171

0524

172

0525

173

0526

174

0527

175 176

0528 0555

177 178

0556 0557

179 180

0558 0568

181

0569

182

0570

183 184 185 186 187

0571 0583 0584 0585 0586

Brass hard drawn hooks and eyes 200 mm Brass hard drawn hooks and eyes 150 mm Brass hard drawn hooks and eyes 100 mm Brass casement window fastener Brass casement stays (straight peg type ) 300 mm weighing not less than 0.33 kg Brass casement stays (straight peg type ) 250 mm weighing not less than 0.28 kg Brass casement stays (straight peg type ) 200 mm weighing not less than 0.24 kg Brass quadrant stays 300 mm Brass fanlight catch Brass fanlight pivot Brass chain with hook for fan light catch Brass hasps and staples (safety type) 300 mm Brass hasps and staples (safety type) 115 mm Brass hasps and staples (safety type)90 mm Brass Night latch Brass helical spring 150 mm Brass curtain rod 20 mm dia 1.25 mm thick Brass curtain rod 25 mm dia 1.25 mm thick Brass brackets (curtain rods) 20 mm Brass cupboard knob or ward robe knob 50 mm Brass screws 50 mm Brass screws 40 mm Brass screws 30 mm Brass screws 25 mm Brass screws 20 mm Chromium plated Brass butt hinges (heavy) type 75x65x4 .0 mm 200 gms Chromium plated Brass butt hinges (light/ordinary) type 125x70x4

10 Nos 10 Nos 10 Nos Each each each each each 10 Nos 10 Nos each 10 Nos 10 Nos 10 Nos each each metre metre each each 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos

Chromium plated Brass butt hinges (light/ordinary) type 100x70x4mm 10 Nos

DSR-12

Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5

10 Nos

Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5

10 Nos

Chromium plated Brass handles 125 mm with plate 175 x32 mm Chromium plated Brass handles 100 mm with plate 150 x 32 mm

Each Each

Chromium plated Brass handles 75mm with plate 125x32 mm Chromium plated Brass mortice latch and lock 100x65 mm with6

Each each

Chromium plated brass casement window fastener Chromium plated Brass casement stays (straight peg type ) 300 mmweighing not less than 0.3 Chromium plated Brass casement stays (straight peg type ) 250 mm weighing not less than 0. Chromium plated Brass casement stays (straight peg type ) 200 mm weighing not less than 0. Chromium plated Brass Night latch Chromium plated Brass Wardrobe Knob 50 mm Chromium plated Brass screws 50 mm Chromium plated Brass screws 40 mm

each each each each each each 100 Nos 100 Nos

Local Market Rates : 2230 of 2298

DSR-12

188 189 190 191 192 193

0587 0588 0589 0590 0591 0592

194

0594

195

0595

196

0596

197 198 199 200 201 202 203

0597 0608 0635 0637 0638 0639 0640

204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237

0641 0642 0643 0644 0645 0646 0647 0648 0649 0650 0651 0652 0653 0654 0655 0656 0660 0661 0662 0663 0664 0665 0666 0667 0668 0669 0670 0679 0680 0681 0682 0683 0684 0685

Chromium plated Brass screws 30 mm Chromium plated Brass screws 25 mm Chromium plated Brass screws 20 mm Chromium plated Brass curtain rod 12 mm dia 1.25mm thick Chromium plated Brass curtain rod 20 mm dia 1.25mm thick Chromium plated Brass curtain rod 25 mm dia 1.25mm thick Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges75x47x1.70 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Nickel plated mild steel piano hinges 1 mm thick 35 mm wide Bright finished or black enameled mild steel screws 50 mm Bright finished or black enameled mild steel screws 40 mm Bright finished or black enameled mild steel screws 30 mm Bright finished or black enameled mild steel screws 25 mm Bright finished or black enameled mild steel screws 20 mm Bright finished or black enameled mild steel bolts and nuts 50x6 mm

100 Nos 100 Nos 100 Nos metre metre metre 10 Nos

Oxidised mild steel butt hinges 125x65x2.12 mm Oxidised mild steel butt hinges 100x58x1.90 mm Oxidised mild steel butt hinges75x47x1.70 mm Oxidised mild steel butt hinges50x37x1.50 mm Oxidised mild steel parliamentary hinges150x125x27x2.8 mm Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm Oxidised mild steel single acting spring hinges 150 mm Oxidised mild steel single acting spring hinges 125 mm Oxidised mild steel single acting spring hinges 100 mm Oxidised mild steel double acting spring hinges 150 mm Oxidised mild steel double acting spring hinges 125 mm Oxidised mild steel double acting spring hinges 100 mm Nickel plated mild steel piano hinges 1 mm thick 35 mm wide Oxidised mild steel sliding door bolt 300x16 mm Oxidised mild steel sliding door bolt 250x16 mm Oxidised mild steel door latch 300x20x6 mm Oxidised mild steel door latch 250x20x6 mm Oxidised mild steel tower bolt (barrel type) 250x10 mm Oxidised mild steel tower bolt (barrel type) 200x10 mm Oxidised mild steel tower bolt (barrel type) 150x10 mm Oxidised mild steel tower bolt (barrel type) 100x10 mm Oxidised mild steel handles 125 mm Oxidised mild steel handles 100 mm Oxidised mild steel handles75 mm Oxidised mild steel hasps and staples(safety type) 150 mm Oxidised mild steel hasps and staples(safety type) 115 mm Oxidised mild steel hasps and staples(safety type)90 mm Oxidised mild steel screws 50 mm Oxidised mild steel screws 40 mm Oxidised mild steel screws 30 mm Oxidised mild steel screws 25 mm

10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each each each each each each metre each each each each each each each each each each each 10 Nos 10 Nos 10 Nos 100 Nos 100 Nos 100 Nos 100 Nos

10 Nos 10 Nos 10 Nos metre 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos each

Local Market Rates : 2231 of 2298

DSR-12

238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257

0686 0687 0688 0689 0690 0691 0692 0693 0694 0696 0697 0698 0699 0700 0701 0702 0703 0704 0705 0706

258

0713

259

0714

260

0715

261

0717

262

0718

263

0719

264

0752

265

0753

266

0754

267

0755

268 269 270 271 272 273 274 275 276 277 278 279 280 281

0757 0759 0761 0763 0769 0770 0771 0773 0775 0776 0777 0784 0785 0788

Oxidised mild steel screws 20 mm Anodised Aluminium butt hinges 125x75x4 mm Anodised Aluminium butt hinges 125x63x4 mm Anodised Aluminium butt hinges 100x75x4 mm Anodised Aluminium butt hinges 100x63x3.2 mm Anodised Aluminium butt hinges 100x63x4 mm Anodised Aluminium butt hinges 75x63x4 mm Anodised Aluminium butt hinges 75x63x3.2 mm Anodised Aluminium butt hinges 75x45x3.2 mm Anodised Aluminium sliding door bolt 300x16 mm Anodised Aluminium sliding door bolt 250x16 mm Anodised Aluminium tower bolt (barrel type)300x10 mm Anodised Aluminium tower bolt (barrel type)250x10 mm Anodised Aluminium tower bolt (barrel type)200x10 mm Anodised Aluminium tower bolt (barrel type)150x10 mm Anodised Aluminium tower bolt (barrel type)100x10 mm Anodised Aluminium handles 125 mm with plate 175 x 32 mm Anodised Aluminium handles 100 mm with plate 150 x 32 mm Anodised Aluminium handles 75mm with plate 125 x 32 mm Anodised Aluminium kicking plate 50 cm long100x3.15 mm Block board construction flush door with teak wood ply on both faces 35 mm thick Block board construction flush door with teak wood ply on both faces 30 mm thick Block board construction flush door with teak wood ply on both faces: 25 mm thick Block board construction flush door with commercial ply on both faces :35 mm thick Block board construction flush door with commercial ply on both faces : 30 mm thick Block board construction flush door with commercial ply on both faces:25 mm thick Block board construction flush door lipping

100 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each each 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each sqm

Square vision panel in Block board construction flush door

sqm of doo

Circular vision panel in Block board construction flush door

Sqm of doo

Decorative type Louvers in Block board construction flush door

sqm of doo

Rebate cutting in Block board construction flush door

sqm of doo

Decorative plywood 4 mm Fuel wood Glue Cement Concrete Jali 40 mm thick Cement Concrete Jali 25 mm thick Kerosene oil Unslaked lime Dehradun white lime Satna lime Dry hydrated lime (factory made) Marble dust/ powder Marble chips up to 4mm and downsize White & black Marble chips large size above 4 mm White & black

sqm quintal kilogram sqm sqm litre quintal quintal quintal quintal cum quintal quintal

sqm sqm sqm sqm sqm sqm of doo

Local Market Rates : 2232 of 2298

DSR-12

282

0801

283 284

0802 0803

285

0804

286

0805

287

0806

288

0807

289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304

0808A 0810 0811 0815 0816 0820 0821 0823 0824 0826 0827 0828 0829 0830 0831 0833

305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320

0834 0835 0845 0851 0855 0856 0857 0858 0859 0863 0865 0868 0869 0870 0873 0874

321 322

0875 0876

323 324 325 326 327

0886 0966 0967 0969 0973

Silicon and acrylic emulsion Acrylic distemper 1st quality , having VOC content less than 50 gm/kg

One Litre One Kg

Acrylic emulsion , having VOC content less than 50 gm/litre Premium acrylic emulsion of interior grade, having VOC content less than 50 gm/ltr. Synthetic enamel paint , having VOC (Volatile Organic Compound) content less than 150 gm/l Ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 Water thinnable cement primer for interior wall surface, having VOC content less than 50 g Moorum Mud (dry) Dry distemper Oil bound washable distemper/ Acrylic distemper Cement primer Distemper primer Pink primer (for wood) Cement base wall care putty Aluminium paint Acid proof paint (chocolate or black) Anticorrosive bituminous paint (black) Black Japan Enamel paint Floor enamel paint in all shades except green Synthetic enamel paint in black or chocolate shade Synthetic enamel paint in all shades except black or chocolate shade

One Litre One Litre

Plastic emulsion paint Roofing paint for iron sheets in red colour Water proofing cement paint Wax polish (ready made) Ordinary varnish Superior copal varnish Superior spar varnish Oil type wood preservative Putty for wood work Pig lead Premixed super white gypsum plaster. Plaster of Paris Plug Copper pins 6 mm dia 7.5 cm long Black colour dark shade pigment Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment Green or blue medium shade pigment Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia Sand Cast iron plain shoe 150 mm dia Copper plate Pulley 25 mm dia Rolling shutter made of 80x1.25 mm machine rolled laths

litre litre kilogram kilogram litre litre litre litre kilogram kilogram kg kilogram each each kilogram kilogram

One Litre One Litre One Litre One Litre cum cum kilogram kilogram litre litre litre One Kg litre litre litre litre litre litre litre litre

kilogram each each kilogram each sqm

Local Market Rates : 2233 of 2298

DSR-12

328 329 330

0974 0975 0976

331

0977

332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352

0978 0979 0980 0982 0983 0992 0994 0996 0999 1000 1001 1002 1003 1004 1005 1005-A 1006 1007 1008 1009 1010

353 354 355 356 357 358

1011 1013 1015 1019 1020 1021

359 360

1022 1023

361 362 363 364 365

1024 1025 1028 1029 1030

366 367 368 369 370 371 372 373 374 375 376

1031 1032 1034 1035 1036 1143 1149 1151 1154 1157 1158

Top cover for rolling shutters 27.5 cm long wire spring grade no 2 for rolling shutters Ball bearing for rolling shutters Extra for mechanical devices chain and cranked operation for operating rolling shutters : Extra for mechanical devices chain and cranked operation for operating rolling shutters : Royalty for good earth Royalty for sludge Coarse sand (zone III) Fine sand (zone IV) Galvanised steel plain sheets Standard quality hard board sheet 3 mm thick Standard quality hard board sheet 4.5 mm thick Shellac Spirit Spun yarn Mild steel round bar 12 mm dia and below Mild steel round bar above 12 mm dia Average rate of Mild steel round bars for reinforcements Twisted steel / deformed bars Thermo mechanically treated steel bars (for reinforcement) Mild steel square bars Structural steel such as tees, angles channels and R.S. joists Flats up to 10 mm in thickness Flats exceeding 10 mm in thickness Mild steel plates Steel glazed door,window/ ventilator, all members viz. F7D, F4B, K11 and K12B etc. Mild steel sheets for tanks Mild steel expanded metal 20x60 mm strands Mild steel hooks Mild steel rivets Hard drawn steel wire fabric Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots Galvanised steel J or L hooks 8 mm dia Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with slots Mild stel bolts 6 mm dia and 25 mm long with hexagonal head Straining bolts Galvanised steel barbed wire Galvanised steel turn buckles Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides

metre each each sqm of doo

Galvanised steel bolts 10 mm dia and 7 cm long with nuts Bolts and nuts up to 300 mm in length Bolts and nuts above 300 mm in length Iron pintels including welded pin Steel beading Glass strip 4 mm thick40 mm deep Boundary stone top chisel dressed 15x15x90 cm Through and bond stone Stone for masonry work Stone for pitching 15 cm x 22.5 cm

each quintal quintal each metre metre each 100 Nos cum cum

sqm of doo cum cum cum cum quintal sqm sqm kilogram litre kilogram quintal quintal quintal quintal Qtl quintal quintal quintal quintal quintal One Kg quintal sqm each quintal sqm 10 Nos 10 Nos each 10 Nos each quintal each each

Local Market Rates : 2234 of 2298

DSR-12

377 378 379 380 381 382 383 384 385 386 387 388 389 390

1159 1160 1161 1163 1164 1165 1166 1168 1169 1174 1175 1177 1179 1182

391 392 393 394 395 396 397 398 399 400 401 402 403 404

1186 1187 1188 1189 1190 1194 1196 1197 1198 1199 1200 1201 1202 1203

405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424

1204 1207 1208 1209 1210 1211 1213 1214 1215 1216 1219 1220 1221 1222 1224 1225 1227 1228 1229 1231

425 426 427 428

1237 1241 1301 1304

Stone dust Red sand stone block White sand stone block White sand stone slab 75 mm thick (un-dressed) Red sand stone slab 40 mm thick (un-dressed) White sand stone slab 40 mm thick (un-dressed) Red sand stone slab 30 mm thick (un-dressed) Kota stone slab 20 mm to 25 mm thick (semi-polished) Kota stone slab 25mm thick (rough chiseled) Red sand stone slab 45 mm and 50 mm thick (un-dressed) White sand stone slab 45 mm and 50 mm thick (un-dressed) Stone grit 6 mm and down size or pea sized gravel Crushed stone 2.36 mm to 12.5 mm size Surkhi Superior class teak wood such as Dandeli, Balarshah or Malabar in planks First class teak wood in scantling First class teak wood in planks Second class teak wood in scantling Second class teak wood in planks Second class deodar wood in planks First class kail wood in planks Second class kail wood in scantling Second class kail wood in planks Sal wood in scantling Kiln seasoned selected sheesum wood planks Precast terrazzo tiles 22 mm thick (light shade) Precast terrazzo tiles 22 mm thick(medium shade) Precast terrazzo tiles 22 mm thick (dark shade) Precast heat resistant terrace tiles (size 300x300 mm) and 20 mm thick

cum 10 cudm 10 cudm sqm sqm sqm sqm sqm Sqm sqm sqm cum cum Cum One Cum

G.I. Limpet washer Bitumen washer G.I. plain washer thick G.I. plain washer thin G.I. plain washer for seam bolts Water proofing materials Welding by gas plant Welding by electric plant Whiting Wire nails Wire mesh (rabbit) 20 mm dia holding down bolts Mild steel sheets with bolts and nuts to rest on pintels Hard drawn steel wire Mild steel flat strap fitting Chequered terrazzo tiles 22 mm thick(light shade) Chequered terrazzo tiles 22 mm thick(medium shade) Chequered terrazzo tiles 22 mm thick (dark shade) Extra for selected planks of second class teakwood Cutting marble or sand stone slab up to 50 mm thick by mechanical device Commercial LPG in cylinder. Bleaching powder Surface box for stop cock

100 Nos 100 Nos 100 Nos 100 Nos 100 Nos kilogram cm cm quintal kilogram sqm quintal each quintal quintal sqm sqm sqm 10 cudm metre

One Cum One Cum One Cum One Cum One Cum One Cum One Cum One Cum One Cum One Cum sqm sqm sqm One Sqm

kg quintal each

Local Market Rates : 2235 of 2298

DSR-12

429 430 431 432 433 434

1305 1307 1309 1314 1315 1330

435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479

1331 1332 1334 1335 1336 1337 1339 1340 1342 1343 1350 1352 1353 1354 1355 1356 1357 1360 1361 1362 1363 1364 1366 1367 1369 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1392 1396 1397 1464 1466 1468 1470 1472

480 481

1532 1533

Surface box for sluice valve Surface box for water meter C.I. bracket for wash basin and sinks C.P.brass chain with 32 mm dia rubber plug C.P.brass chain with 40 mm dia rubber plug Clamps and M.S. stays including bolts and nuts for 100 mm pipe M.S.Holder bat clamp of approved design for 100 mm S.C.I. pipe

each each pair each each each each

M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe Clamps and M.S. stays including bolts and nuts for 50 mm pipe Clamps and M.S. stays including bolts and nuts for 75 mm pipe Clearing eye with chain and lid 100 mm dia Clearing eye with chain and lid 150 mm dia Brass bib-cock 15 mm dia Brass bib-cock 20 mm dia Brass stop-cock 15 mm dia Brass stop-cock 20 mm dia Mosquito proof coupling of approved design C.I. cover and frame 300x300 mm inside C.I.cover without frame 300x300mm inside i/c cover of 4.50 kg Rectangular cover 455x610 mm with frame (low duty) Rectangular cover 455x610mm without frame (low duty) 500 mm dia cover with frame (medium duty) 500 mm dia cover without frame (medium duty) C.I.mouth, brass ferrule 15 mm dia C.I.mouth, brass ferrule 20 mm dia C.I.mouth, brass ferrule 25 mm dia Vitreous china foot rests 250x130x30 mm C.I. grating 100x100 mm C.I. grating 150x150 mm C.I. grating 180x180 mm S.C.I. gully or nahani grating 100 mm dia Rubber insertions for80 mm dia pipe joints Rubber insertions for 100 mm dia pipe joints Rubber insertions for 125 mm dia pipe joints Rubber insertions for 150 mm dia pipe joints Rubber insertions for 200 mm dia pipe joints Rubber insertions for 250 mm dia pipe joints Rubber insertions for 300 mm dia pipe joints Rubber insertions for 350 mm dia pipe joints Rubber insertions for 400 mm dia pipe joints Rubber insertions for 450 mm dia pipe joints Rubber insertions for 500 mm dia pipe joints Rubber insertions for 600 mm dia pipe joints Mirror of superior make glass 60x45 cm Vitreous china pedestal for wash basin Pig lead S & S.C.I.standard specials up to 300 mm dia (heavy class) S & S.C.I.standard specials over 300 mm dia (heavy class) Flanged C.I. standard specials up to 300 mm dia(heavy class) Flanged C.I. standard specials over 300 mm dia(heavy class) Casing pipe 100 mm dia Flush pipe with union spreaders and clamps all in C.P. brass for single stall Flush pipe with union spreaders and clamps all in C.P. brass for

each each each each each each each each each each each each each each each each each each each pair each each each each each each each each each each each each each each each each each each kilogram quintal quintal quintal quintal metre each each

Local Market Rates : 2236 of 2298

DSR-12

482 483

1534 1535

484

1540

485

1541

486

1542

487 488 489 490 491 492 493 494 495 496 497 498 499 500

1543 1545 1546 1547 1548 1549 1550 1551 1552 1555 1559 1608 1612 1614

501

1616

502

1617

503 504 505 506 507 508 509 510 511

1618 1620 1621 1622 1624 1625 1627 1628 1630

512 513 514

1631 1633 1634

515

1636

516 517 518 519 520 521 522 523 524 525 526

1637 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648

Flush pipe with union spreaders and clamps all in C.P. brass for Flush pipe with union spreaders and clamps all in C.P. brass for Flush pipe and spreaders G.I.for single set of one squatting plate urinal each Flush pipe and spreaders G.I.for range of two squatting plates urinal

each each each

Flush pipe and spreaders G.I.for range of three squatting plates urinal

each

Flush pipe and spreaders G.I.for range of four squatting plates urinal

each

G.I. pipes 15 mm dia G.I. pipes 20 mm dia G.I. pipes 25 mm dia G.I. pipes 32 mm dia G.I. pipes 40 mm dia G.I. pipes 50 mm dia G.I. pipes 65 mm dia G.I. pipes 80 mm dia G.I. back (jam) nuts25 mm dia G.I. back (jam) nuts65 mm dia G.I. tees (equal) 25 mm G.I. tees (equal) 65 mm G.I. inlet connection S.C.I. soil, waste and vent single socketed pipe1.80 metres long:75mm dia S.C.I. soil, waste and vent single socketed pipe1.80 metres long: 100mm dia S.C.I. soil, waste and vent single socketed pipe1.80 metres long: 150mm dia S.C.I. plain bend75mm dia S.C.I. plain bend 100mm dia S.C.I. plain bend 150mm dia S.C.I. bend with access door 75mm dia S.C.I. bend with access door 100mm dia S.C.I. plain single equal junctions75x75x75 mm dia S.C.I. plain single equal junctions100x100x100 mm dia S.C.I. single equal junctions75x75x75 mm dia with access door. S.C.I. single equal junctions 100x100x100 mm dia with access door.

metre metre metre metre metre metre metre metre each each each each each each

S.C.I. plain double equal junctions 75x75x75x75 mm dia S.C.I. plain double equal junctions100x100x100x100 mm dia S.C.I. double equal junctions75x75x75x75 mm dia with access door.

each each each

S.C.I. double equal junctions 100x100x100x100 mm dia with access door Slotted cowl (terminal guard )75 mm dia Slotted cowl (terminal guard ) 100 mm dia G.I. Union 15 mm nominal bore G.I. Union 20 mm nominal bore G.I. Union 25 mm nominal bore G.I. Union 32 mm nominal bore G.I. Union 40 mm nominal bore G.I. Union 50 mm nominal bore G.I. Union 65 mm nominal bore G.I. Union 80mm nominal bore

each

each

each each each each each each each each each each each

each each each each each each each each each each

Local Market Rates : 2237 of 2298

DSR-12

527

1649

528

1653

529

1656

530

1659

531 532 533

1662 1666 1667

534

1669

535

1670

536

1672

537

1673

538

1674

539 540 541 542 543

1677 1682 1683 1685 1686

544

1687

545

1688

546

1689

547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566

1690 1693 1700 1701 1702 1703 1704 1705 1706 1707 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718

Polyethylene water storage tank with cover and suitable locking per litre arrangement Sand cast iron S&S plain single unequal junctions : 100x100x75 mm dia each Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with access door. Sand cast iron S&S plain double unequal junctions : 100x100x75x75 mm dia Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with access door. Sand cast iron heel rest bend75mm dia Sand cast iron heel rest bend 100mm dia S.C.I. single equal invert branch of required degree75x75x75 mm dia

each

S.C.I. single equal invert branch of required degree 100x100x100 mm dia S.C.I. double equal invert branch of required degree 75x75x75x75 mm dia S.C.I. double equal invert branch of required degree 100x100x100x100 mm dia S.C.I. single unequal invert branch of required degree 100x100x75 mm dia S.C.I. double unequal invert branch of required degree 100x100x75x75 mm dia S.C.I. door pieces 75 mm dia S.C.I. door pieces 100 mm dia S.C.I. collar 75 mm dia S.C.I. collar 100 mm dia Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore Unplasticised P.V.C. connection pipe with brass union 30 cm long 20 mm bore Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore S.C.I. hand pump R.C.C. pipes NP2 class 100 mm dia R.C.C. pipes NP2 class 150 mm dia R.C.C. pipes NP2 class 250 mm dia R.C.C. pipes NP2 class 300 mm dia R.C.C. pipes NP2 class 450 mm dia R.C.C. pipes NP2 class 500 mm dia R.C.C. pipes NP2 class 600 mm dia R.C.C. pipes NP2 class 700 mm dia R.C.C. pipes NP2 class 800 mm dia R.C.C. pipes NP2 class 900 mm dia R.C.C. pipes NP2 class 1000 mm dia R.C.C. pipes NP2 class 1100 mm dia R.C.C. pipes NP2 class 1200 mm dia R.C.C. collarsNP2 class 100 mm dia R.C.C. collarsNP2 class 150 mm dia R.C.C. collarsNP2 class 250 mm dia R.C.C. collarsNP2 class 300 mm dia R.C.C. collarsNP2 class 450 mm dia

each

each each each each each

each each each each each each each each each each each each each metre metre metre metre metre metre metre metre metre metre metre metre metre each each each each each

Local Market Rates : 2238 of 2298

DSR-12

567 568 569 570 571 572 573 574 575 576 577 578 579 580 581

1719 1720 1721 1723 1724 1725 1726 1727 1854 1855 1856 1858 1863 1871 1872

582

1875

583 584 585 586 587 588 589

1876 1878 1879 1881 1882 1885 1889

590

1891

591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609

1893 1895 1896 1897 1898 1900 1902 1904 1913 1915 1922 1923 1924 1927 1928 1929 1930 1931 1932

610

1933

611

1934

612

1935

613

1936

R.C.C. collarsNP2 class 500 mm dia R.C.C. collarsNP2 class 600 mm dia R.C.C. collarsNP2 class 700 mm dia R.C.C. collarsNP2 class 800 mm dia R.C.C. collarsNP2 class 900 mm dia R.C.C. collarsNP2 class 1000 mm dia R.C.C. collarsNP2 class 1100 mm dia R.C.C. collarsNP2 class 1200 mm dia Stoneware pipes grade A (60 cm long) 100 mm dia Stoneware pipes grade A (60 cm long) 150 mm dia Stoneware pipes grade A (60 cm long) 200 mm dia Stoneware pipes grade A (60 cm long) 250 mm dia Fire clay kitchen sink: 600x450x250 mm White vitreous china laboratory sink450x300x150 mm White vitreous china laboratory sink600x450x200 mm White plastic seat (solid)with lid C.P.brass hinges and rubber buffers

each each each each each each each each each each each each each each each each

Black plastic seat (solid) with lid C.P.brass hinges and rubber buffers

each

Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia Spun yarn Strainer brass 40 mm dia 1.5 metre long 15 mm C.P.brass tap C.P.brass toilet paper holder of standard size C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.bras C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.bras C.P.brass trap40 mm dia 100 mm S.C.I. trap with vent heel 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet 100 mm S.C.I. trap with 100 mm inlet and75 mm outlet S.W. gully trap P type 100x100 mm S.W. gully trap P type 150x100 mm S.W. gully trap P type 180x150 mm Vitreous china lipped front urinal Vitreous china squatting plate urinal H.P. or L.P. ball valve with polythene floats: 15 mm dia H.P. or L.P. ball valve with polythene floats: 20 mm dia H.P. or L.P. ball valve with polythene floats: 25 mm dia Brass full way valve with C.I. wheel (screwed end) 25 mm dia Brass full way valve with C.I. wheel (screwed end) 32 mm dia Brass full way valve with C.I. wheel (screwed end) 40 mm dia Brass full way valve with C.I. wheel (screwed end) 50 mm dia Brass full way valve with C.I. wheel (screwed end) 65 mm dia Brass full way valve with C.I. wheel (screwed end) 80 mm dia Gunmetal non-return valve-horizontal (screwed end) 25 mm dia

each each kilogram each each each each

Gunmetal non-return valve-horizontal (screwed end) 32 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 40 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 50 mm dia

each

each each each each each each each each each each each each each each each each each each each each

Local Market Rates : 2239 of 2298

DSR-12

614

1937

615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638

1938 1940 1941 1942 1943 1944 1945 1947 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964

639 640 641

1965 1970 1980

642 643 644 645 646 647 648 649 650 651 652 653 654 655

1984 1986 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2211 2215

656 657 658 659 660 661 662 663

2216 2224 2225 2226 2228 2241 2242 2260

Gunmetal non-return valve-horizontal (screwed end) 65 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 80 mm dia

each

C.I.sluice valve (with caps) class I : 100 mm dia C.I.sluice valve (with caps) class I : 125 mm dia C.I.sluice valve (with caps) class I : 150 mm dia C.I.sluice valve (with caps) class I : 200 mm dia C.I.sluice valve (with caps) class I : 250 mm dia C.I.sluice valve (with caps) class I : 300 mm dia Vitreous china flat back wash basin 630x450 mm Vitreous china angle back wash basin 600x480 mm Vitreous china angle back wash basin 400x400 mm C.P. brass waste 32 mm C.P. brass waste 40 mm Vitreous china Indian type w.c. pan size 580 mm Vitreous china orrisa type w.c. pan size 580 mm Vitreous china pedestal type water closet Bolts and nuts 16 mm dia 60 mm long Bolts and nuts 16 mm dia 65 mm long Bolts and nuts 20 mm dia 65 mm long Bolts and nuts 20 mm dia 70 mm long Bolts and nuts 20 mm dia 75 mm long Bolts and nuts 20 mm dia 80 mm long Bolts and nuts 24 mm dia 85 mm long Bolts and nuts 24 mm dia 90 mm long Bolts and nuts 27 mm dia 100 mm long White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as squatting Vitreous china foot rests 250x125x25 mm Fly ash Common burnt clay F.P.S.( non modular) bricks tile class designation 10 Common burnt clay modular bricks class designation 12.5 Carraige of Steam coal Carraige of Bricks Carraige of Stone aggregate below 40 mm nominal size Carraige of Coarse sand Carraige of Timber Carraige of Steel Carraige of Stone aggregate 40 mm nominal size and above Carraige of Brick tiles Carraige of Lime Carraige of Cement Carraige of Tar bitumen Carraige of Soling stone & masonry stone Carraige of Stone blocks white & red sand stone & kota stone slab

each each each each each each each each each each each each each each each each each each each each each each each each

Carraige of S.W. pipes100 mm dia Carraige of S.W. pipes150 mm dia Carraige of S.W. pipes200 mm dia Carraige of S.W. pipes250 mm dia Carraige of Good earth Carraige of Dump manure Carraige of Brick aggregate

100 metre 100 metre 100 metre 100 metre cum cum cum

pair cum 1000 Nos 1000 Nos tonne 1000 Nos cum cum cum tonne cum 1000 Nos cum tonne tonne cum tonne

Local Market Rates : 2240 of 2298

664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717

DSR-12

2261 2262 2264 2265 2267 2268 2271 2273 2275 2281 2287 2290 2299 2302 2303 2308 2309 2311 2314 2317 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2341 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2355 2356 2357 2391 2392

Carraige of Fine sand (1 part badarpur sand : 2 parts jamuna sand)

cum

Carraige of Fly ash Carraige of Rubbish Carraige of Moorum Carraige of Stone dust Carraige of Marble dust and marble chips Carraige of G.I. pipes below 100 mm dia Carraige of A.C.sheet and accessories Carraige of R.C.C. pipes 100 mm dia Carraige of R.C.C. pipes 150 mm dia Carraige of R.C.C. pipes 250 mm dia Carraige of R.C.C. pipes 300 mm dia Carraige of R.C.C. pipes 450 & 500 mm dia Carraige of G.I.sheet and accessories Carraige of R.C.C. pipes 600, 700, 750 & 800 mm dia Carraige of Plaster of paris Carraige of Cast iron fittings Carraige of Red bajri Carraige of Barbed wire Carraige of Sludge Carraige of Spun iron S & S pipes 100 mm dia Carraige of Spun iron S & S pipes 125 mm dia Carraige of Spun iron S & S pipes 150 mm dia Carraige of Spun iron S & S pipes 200 mm dia Carraige of Spun iron S & S pipes 250 mm dia Carraige of Spun iron S & S pipes 300 mm dia Carraige of Spun iron S & S pipes 350 mm dia Carraige of Spun iron S & S pipes 400 mm dia Carraige of Spun iron S & S pipes 450 mm dia Carraige of Spun iron S & S pipes 500 mm dia Carraige of Spun iron S & S pipes 600mm dia Carraige of C.I. pipes 500 mm dia Carraige of R.C.C. pipes 900 mm dia Carraige of R.C.C. pipes 1000 mm dia Carraige of R.C.C. pipes 1100 mm dia Carraige of R.C.C. pipes 1200 mm dia Carraige of Jamuna sand Carraige of Pig lead Carraige of Ductile iron pipes (k7) 100 mm dia Carraige of Cast iron pipes 150 mm dia Carraige of Cast iron pipes 200 mm dia Carraige of Cast iron pipes 250 mm dia Carraige of Cast iron pipes 300 mm dia Carraige of Cast iron pipes 350 mm dia Carraige of Cast iron pipes 400 mm dia Carraige of Cast iron pipes 450 mm dia Carraige of Cast iron pipes 500 mm dia Carraige of Cast iron pipes 600 mm dia Carraige of Cast iron pipes 700 mm dia Carraige of Cast iron pipes 800 mm dia Carraige of Cast iron pipes 900 mm dia Carraige of Cast iron pipes 1000 mm dia Strips-Aluminium fluted 3.15mm thick and 150mm wide Strips Aluminium fluted 3.15mm thick and 200mm wide metre

cum cum cum cum cum tonne tonne 100 metre 100 metre 100 metre 100 metre 100 metre tonne 100 metre tonne tonne cum tonne cum 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre cum tonne 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre metre Metre

Local Market Rates : 2241 of 2298

DSR-12

718 719 720 721 722 723

2393 2394 2395 2396 2397 2398

724

2406

725 726 727 728

2407 2412 2413 2447

729

2449

730

2451

731

2452

732

2453

733 734

2454 2455

735 736

2456 2459

737 738 739

2464 2465 2466

740 741 742 743 744 745

2467 2468 2469 2470 2471 2480

746

2481

747 748 749 750

2483 2500 2504 2505

751

2506

752

2507

753

2508

754

2509

755

2510

1 mm thick Stainless Steel Cover plate grade 304 Coupler 16 mm dia Coupler 20 mm dia Coupler 25 mm dia Coupler 28 mm dia Coupler 32 mm dia Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 kg/sqm). Ply wood 5 ply with commercial ply on both faces 6 mm thick 12 mm commercial ply Hollock ballies 125 mm diameter Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts Brass cupboard lock 6 levers (best make of approved quality) 40 mm size Brass cupboard lock 6 levers (best make of approved quality) 50 mm size Brass cupboard lock 6 levers (best make of approved quality) 65 mm size Brass cupboard lock 6 levers (best make of approved quality) 75 mm size Brass hanging type door stopper 150 mm Hydraulic door closer bottle type M.S. body with necessary accessories and screws complet Anodised Aluminium hanging type door stopper Anodised Aluminium pull bolt lock (locking bolt) of size 85 mmx42mm with screws, bolts Anodised Aluminium Casement stay 250 mm Hollock wood in scantling Chromium plated Brass pull bolt lock (locking bolt) of size 85 mmx42mm with screws, bolt Nickeled Chromium Brass cupboard lock 40 mm size Nickeled Chromium Brass cupboard lock 50 mm size Nickeled Chromium Brass cupboard lock 65 mm size Nickeled Chromium Brass cupboard lock 75 mm size Ply wood 5 ply with teak ply on both faces 9 mm thick Ply wood 5 ply with teak ply on one face and commercial ply on another face 9 mm thick Ply wood 7 ply with teak ply on one face and commercial ply on another face 9 mm thick Extra for selected planks of second class deodar wood Kiln seasoning of timber Hollock wood in planks Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia double threaded 6.8 grade Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia double threaded 6.8 grade Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia double threaded 6.8 grade Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia double threaded 6.8 grade Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia double threaded 6.8 grade

One Kg Each Each Each Each Each sqm sqm sqm One Sqm metre each each each each each each each each each each cum each each each each each sqm sqm sqm one cum cum one cum 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos

Local Market Rates : 2242 of 2298

DSR-12

756

2602

757 758 759 760

2603 2704 2708 2709

761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776

2710 2750 2751 2901 2902 2903 2904 2908 2909 2910 2911 2914 2916 3002 3004 3050

777

3080

778

3084

779

3088

780

3092

781 782

3096 3213

783 784

3228 3229

785 786 787 788 789 790 791 792 793

3300 3311 3314 3317 3320 3321 3326 3327 3617

794

3620

795 796 797 798

3621 3624 3625 3628

Common burnt clay F.P.S. (non modular) bricks class designation7.5

1000 Nos

Common burnt clay F.P.S. bricks (non modular)class designation 5

1000 Nos

Aluminium Strip 40 mm wide and 2 mm thick Truf Paver (500 x 500 x 40 mm) Ceremic Tiles Pieces for Crazy Flooring White marble makrana second quality plain veined stone pieces for crazy flooring 8 mm thick granite stone tiles (mirror polished of all shades) 8 mm thick marble tiles (polished) Raj Nagar Stone Aggregate (Single size) : 100 mm nominal size Stone Aggregate (Single size) : 80 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Stone chippings/ screenings 150 micron nominal size Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size Stone chippings/ screenings 12.5/ 13.2 mm nominal size Stone chippings/ screenings 10/ 11.2 mm nominal size Solvent Paving Asphalt 80/100 penetration Polyvinyl chloride sheet 400 micron thick Stone ware spouts 100 mm dia 60 cm long Galvanised steel corrugated sheets Gunmetal non-return valve-horizontal (screwed end) 25 mm dia

kilogram One Sqm One Qtl quintal

Gunmetal non-return valve-horizontal (screwed end) 32 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 40 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 50 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 65 mm dia

each

Vitreous china Surgeon type wash basin of size 660x460 mm 600x120 mm glass shelf with anodised aluminium angle frame, C.P.brass brackets and guard r Vitreous china flat back wash basin 550x400 mm Gunmetal non-return valve-horizontal (screwed end) 80 mm dia

each each

C.I.sluice valve (with caps) class II : 100 mm dia C.I.sluice valve (with caps) class II : 125 mm dia C.I.sluice valve (with caps) class II : 150 mm dia C.I.sluice valve (with caps) class II : 200 mm dia C.I.sluice valve (with caps) class II : 250 mm dia C.I.sluice valve (with caps) class II : 300 mm dia 15 mm Battery Based Sensor Pillar Cock C.P. Brass union 40 mm dia C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:100mm dia C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:75mm dia S.C.I. S&S bends with access door100mm dia S.C.I. S&S bends with access door75mm dia S.C.I. S&S bend100mm dia

each each each each each each Each each each

sqm sqm cum cum cum cum cum cum cum cum kilogram tonne sqm each quintal each

each each

each each each each

Local Market Rates : 2243 of 2298

DSR-12

799 800 801 802 803

3629 3634 3635 3640 3641

804 805 806 807

3644 3645 3650 3651

808

3654

809 810 811

3655 3660 3664

812

3670

813

3674

814

3681

815

3682

816

3685

817

3686

818

3690

819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839

3695 3699 3707 3708 3712 3713 3716 3717 3728 3729 3733 3734 3738 3739 3746 3747 3749 3860 3861 4001 4002

840

4006

S.C.I. S&S bend75mm dia S.C.I. S&S heel rest sanitary bend 100mm dia S.C.I. S&S heel rest sanitary bend 75mm dia S.C.I. S&S single equal junctions100x100x100 mm S.C.I. S&S single equal junctions75x75x75 mm S.C.I. S&S single equal junctions with access door 100x100x100 mm

each each each each each each

S.C.I. S&S single equal junctions with access door 75x75x75 mm S.C.I. S&S double equal junctions100x100x100x100 mm S.C.I. S&S double equal junctions75x75x75x75 mm S.C.I. S&S double equal junctions with access door 100x100x100x100 mm. S.C.I. S&S double equal junctions with access door 75x75x75x75 mm

each each each each

S.C.I. S&S single unequal junctions100x100x75 mm S.C.I. S&S single unequal junctions with access door S.C.I. S&S double unequal junctions100x100x75x75 mm 100x100x75 mm S.C.I. S&S double unequal junctions with access door 100x100x75x75 mm S.C.I. S&S single equal invert branch of required degree 100x100x100 mm dia S.C.I. S&S single equal invert branch of required degree 75x75x75 mm dia S.C.I. S&S double equal invert branch of required degree100x100x100x100 mm dia S.C.I. S&S double equal invert branch of required degree 75x75x75x75 mm dia S.C.I. S&S single unequal invert branch of required degree100x100x75 mm dia S.C.I. S&S double unequal invert branch of required degree100x100x75x75 mm dia S.C.I. S&S, 75 mm offset for75 mm dia pipe S.C.I. S&S, 150 mm offset for75 mm dia pipe S.C.I. S&S, 150 mm offset for100 mm dia pipe S.C.I. S&S, 114 mm offset for75 mm dia pipe S.C.I. S&S, 114 mm offset for100 mm dia pipe S.C.I. S&S, 152 mm offset for75 mm dia pipe S.C.I. S&S, 152 mm offset for100 mm dia pipe S.C.I S&S door pieces 100 mm dia S.C.I S&S door pieces 75 mm dia S.C.I S&S, Slotted Cowl (Terminal Guard) 100 mm S.C.I S&S, Slotted Cowl (Terminal Guard) 75 mm S.C.I S&S, collars 100 mm S.C.I S&S, collars 75 mm S.C.I. S&S, 76 mm offset for75 mm dia pipe S.C.I. S&S, 76 mm offset for100 mm dia pipe Vitreous china toilet paper holder of standard size 560 mm dia cover with frame (Heavy duty) 560 mm dia cover without frame (Heavy duty) Stainless steel (Grade-304)hollow section round/square tubes Stainless steel bolts/square bar and plates Pressed steel door frames (mild steel sheet 1.25mm) Profile “B”

each each each

each

each each each each each each each each each each each each each each each each each each each each each each each each each One Kg One Kg metre

Local Market Rates : 2244 of 2298

DSR-12

841

4007

842 843 844 845 846 847 848 849 850 851 852 853 854

4008 4009 4010 4011 4012 4013 4201 4202 4203 4204 4205 4206 4207

855 856 857 858 859

6001 6007 6010 6019 6501

860

7001

861 862 863 864

7003 7004 7005 7006

865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882

7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7028

883 884 885

7029 7030 7031

886 887

7032 7033

Pressed steel door frames (mild steel sheet 1.25mm) Profile “C”

metre

Pressed steel door frames (mild steel sheet 1.25mm) Profile “E”

metre

Mild steel tubes hot finished welded type Mild steel tubes hot finished seamless type Mild steel tubes electric resistant or induction butt welded Circular C.I. Box for ceiling fan Pulley 40 mm dia Aluminium primer Red oxide Zinc chromate primer Copper acetate Hydrochloric acid Copper chloride Copper nitrate Ammonium chloride White marble slab Makrana second quality plain veined 18 mm thick

kilogram kilogram kilogram each each litre litre kilogram kilogram kilogram kilogram kilogram sqm

Pink marble slab plain 18mm thick Udaypur green marble slab plain 18mm thick Black Zebra marble slab plain 18mm thick River Sand Brass 100mm mortice latch and lock with6 levers without pair of handles Pair of Anodised Aluminium lever handles for 100mm mortice latch and lock Vitreous china flat back wash basin 450x300 mm Vitreous china 10 litres low level cistern without fittings Vitreous china 10 litres low level cistern with fittings Common burnt clay F.P.S. clay fly ash bricks class designation 7.5

sqm sqm sqm cum each

Gypsum board Ceiling sections Perimeter channel Intermediate channel Ceiling angle Connecting clips Soffit cleat Joint filler Joint finisher Joint tape roll Dash fastener/ Chemical fastener All drive screws ( for gypsum board) Primer ( for gypsum board) Chlorpyriphos 20% E.C. / Lindane 20% E.C. Chromium plated brackets ( curtain rods) Acid Proof cement 12.5 mm thick Fully Perforated gypsum board Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm 12.5 mm thick tapered edge gypsum fire resistant board 12.5 mm thick tapered edge gypsum moisture resistant board Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm) Nickel plated M.S. pipe 25 mm dia.

sqm metre metre metre metre each each kilogram kilogram roll each 100 Nos litre litre each tonne One Sqm sqm

each each each each 1000 Nos

One Sqm One Sqm sqm metre

Local Market Rates : 2245 of 2298

DSR-12

888 889 890 891 892 893 894 895 896 897 898 899 900 901

7034 7035 7036 7040 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053

902 903

7055 7056

904 905

7059 7060

906

7063

907

7064

908

7065

909

7070

910 911 912 913 914

7071 7072 7073 7074 7075

915 916 917 918 919

7076 7077 7087 7090 7091

920

7095

921

7096

922

7097

923

7098

924

7101

925

7102

926 927

7103 7104

Nickel plated M.S. pipe 20 mm dia. Nickel plated M.S. Brackets for curtain rod 20 mm Nickel plated M.S. Brackets for curtain rod 25 mm Oxidised mild steel screws 35 mm Rolling shutters of 80x0.90 mm laths Rolling shutters of 80x1.2 mm laths Top cover of Rolling shutters 0.90 mm thick Top cover of Rolling shutters 1.20 mm thick Rawl plug 50 mm (designation 10 no.) Teak wood lipping of size 25x3 mm in pelmets PU Primer 40 mm (average) PU spray having 40-45 kg/cum density GI wire netting 3/4" x 24 G 400 G polythene sheet Flat pressed 3 layer and graded particle board (medium density) Grade 1 conforming to IS : Aluminium tee channel (heavy duty) with rollers and stop end Aluminium hanging floor door stopper with twin rubber & stopper

metre each each 100 Nos sqm sqm metre metre each metre One Sqm One Sqm One Sqm One Sqm sqm

Hydraulic door closer tubular type Aluminium section body Oxidised M.S.casement stay (straight peg type) 300 mm not less than 0.33 kg Oxidised M.S.casement stay (straight peg type) 250 mm not less than 0.28 kg Oxidised M.S.casement stay (straight peg type) 200 mm not less than 0.24 kg Chequered precast cement concrete tiles 22mm thick using marble chips of size 6mm - Light White marble Raj Nagar plain 20 mm thick (slab area 0.10 sqm to 0.20 sqm) Wall mounted water closet Adjustable Vetrious China Cistern with fittings White Vetrious China Waterless Urinal Cistern with fittings for Waterless Urinal White Vetrious Urinal (battery based infrared sensor operated 610x390x370mm) Acid and alkali resistant tiles 300x300 mm size, 10 mm thick S.C.I. Tee 150 mm Expanded polystyrene type N- Normal Expanded polystyrene type - SE Stainless steel kitchen sink - with drain board bowl depth 250 mm.

each each

Stainless steel kitchen sink - with drain board 510 x 1040mm bowl depth 225 mm. Stainless steel kitchen sink - with drain board 510 x 1040mm bowl depth 200 mm. Stainless steel kitchen sink - with drain board 510x1040mm bowldepth 178 mm Stainless steel kitchen sink - without drain board 610x510mm bowl depth 200 mm. Stainless steel kitchen sink - without drain board 610x460mm bowl depth 200 mm. Stainless steel kitchen sink - without drain board 470x420mm bowl depth 178 mm Coloured Orissa pattern W.C. pan 580x440 mm

each

metre each

each each sqm sqm Each Each Each Each Each 10 Nos each sqm sqm each

each each each each each each

Local Market Rates : 2246 of 2298

DSR-12

928 929

7105 7106

930 931

7107 7112

932

7113

933

7114

934 935

7115 7116

936

7117

937

7118

938

7119

939

7120

940

7123

941

7126

942 943 944

7127 7128 7129

945

7130

946

7131

947

7132

948

7133

949

7134

950

7135

951

7136

952

7137

953

7139

954

7143

955

7151

956

7154

957

7155

Coloured Pedestal type W.C. pan 580x440 mm (European type) Coloured Vitreous china 10 lit. low level cistern Coloured (other than black) solid P.V.C. seat in European W.C. pan

each each each

Circular shape 450 mm dia Mirror with Plastic moulded frame Rectangular shape 453x357 mm Mirror with Plastic moulded frame

each each

Oval shape 450x350 mm (outer dimensions) Mirror with Plastic moulded frame Rectangular shape 1500x450 mm Mirror with Plastic moulded frame

each

Hard board 6 mm thick Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with mm dia with length not le Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not le Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not le Coloured High density polyethylene/ poly propylene 10 lit. (full flush) capacity controlle White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern Coloured Vitreous china 10 lit. (full flush) capacity controlled low level flushing cister S.W. intercepting trap 100 mm dia S.W. intercepting trap 150 mm dia Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 25 Square shape 350x350 mm precast R.C.C. manhole cover with frame L.D. - 25 Circular shape 450 mm dia precast R.C.C. manhole cover with frame

sqm each

Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10 Circular shape 500 mm dia precast R.C.C. manhole cover with frame M.D. - 10 Circular shape 560 mm dia precast R.C.C. manhole cover with frame H.D. - 20 Circular shape 560 mm dia precast R.C.C. manhole cover with frame E.H.D. - 35 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per TADS IS Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per TADS IS

each

each

each each each each each each each each each each each

each each each sqm sqm sqm sqm sqm sqm

Local Market Rates : 2247 of 2298

DSR-12

958 959 960 961 962

7157 7178 7181 7182 7183

963 964

7184 7187

965

7188

966

7189

967

7190

968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985

7191 7192 7193 7194 7195 7196 7197 7198 7199 7208 7209 7212 7213 7214 7215 7231 7232 7233

986

7236

987 988 989 990

7237 7239 7240 7241

991

7244

992

7245

993

7246

994

7247

995

7248

996

7249

997

7250

Laminated veneer lumber confirming to TADSS IS:1995 manufactured in factory in frames of Chemical ASTMC-type I C.I. pile shoe M.S. clamps for pile shoe Bentonite Oxidised M.S. safety chain (weighing not less than 450 gms) for door

One cum One Kg kilogram kilogram tonne each

C.I. grating 150 mm dia. (Weighing not less than 440 gm) each U-PVC pipes (working pressure 4 kg / cm2) Single socketed pipe 75 metre mm dia. U-PVC pipes (working pressure 4 kg / cm2) Single socketed pipe 110 metre mm dia. U-PVC pipes (working pressure 4 kg / cm2) Rubber (Seal) Ring 75 mm each dia. U-PVC pipes (working pressure 4 kg / cm2) Rubber (Seal) Ring 110 mm metre dia. UPVC coupler for UPVC drainage pipes 75 mm each UPVC coupler for UPVC drainage pipes 110 mm each UPVC pushfit coupler (single) 75 mm thick each UPVC pushfit coupler (single) 110 mm thick each UPVC single equal Tee (with door) 75x75x75 mm each UPVC single equal Tee (with door) 110x110x110 mm each UPVC single equal Tee (with door) 75x75x75 mm each UPVC single equal Tee (with door) 110x110x110 mm each UPVC bend 87.5o 75 mm bend each UPVC bend 87.5o 110 mm bend each UPVC plain shoe 75 mm bend each UPVC plain shoe 110 mm bend each UPVC pipe clip 75 mm bend each UPVC pipe clip 110 mm bend each Resin Bonded Glass wool 16 kg/m³ 50 mm thick sqm Resin Bonded Glass wool 24 kg/m³ 50 mm thick sqm Fibre glass tissue reinforcement Type II Grade I sqm Precast chequered cement tiles 22 mm thick Dark shade using ordinary sqm cement Precast chequered cement tiles 22 mm thick Medium shade using 50% Sqm White cement & 50% Ordi Epoxy paint litre Fire retardant paint litre Melamine polish litre Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble sqm stone - 18 mm thick Table rubbed polished stone 18mm thick (75x50cm) Granite stone sqm 18mm thick Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part- per test IV) including Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part- per test IV) including Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part- per test IV) including Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-IV) per test including pre Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-IV) per test including pre

Local Market Rates : 2248 of 2298

DSR-12

998

7251

999

7252

1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011

7253 7254 7255 7256 7257 7258 7259 7260 7261 7266 7269 7271

1012 1013 1014

7272 7280 7281

1015

7295

1016 1017

7297 7306

1018 1019

7307 7309

1020

7312

1021

7313

1022

7314

1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041

7315 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7338

Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including pr Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining Hardening Compound Road marking paint (spirit based) Superior quality road marking paint C.P. Brass bibcock 15 mm C.P. Brass long nose bibcock 15 mm C.P. Brass long body bibcock 15 mm C.P. Brass stop cock (concealed) 15 mm C.P. Brass angle valve 15 mm Pressed clay tiles 25 mm thick particle board IInd class teak wood lipping 25 mm wide x 12 mm thick 25 mm thick melamine faced prelaminated three layer particle board

per test

Waste plastic additive Chemical ASTMC-type II Granite Black marble, 18 mm thick slab, above 0.2 sqm up to 0.5 sqm (areawise) Granite Black marble, 18 mm thick slab, above 1.0 sqm up to 2.0 sqm (areawise) Aluminium T or L sections For flush door shutters Extra for providing teak veneering on one side instead of commerc Paving Asphalt of grade VG-30 of approved quality Expandable fastener with plastic sleeve and M.S. screws. 25 mm long

One MT One Kg sqm

Expandable fastener with plastic sleeve and M.S. screws. 32 mm long

each

Expandable fastener with plastic sleeve and M.S. screws. 40 mm long

each

Expandable fastener with plastic sleeve and M.S. screws. 50 mm long

each

Plasticizer / super plasticizer Wall form panel 1250x500 mm Tie bolt 12 mm dia 100 mm length Tie bolt 12 mm dia 150 mm length Tie bolt 20 mm dia 150 mm length Tie bolt 20 mm dia 225 mm length Spring coil 12 mm Plastic cone 12 mm dia Corner angle 45x45x5 mm 1.50 m long 100 mm channel shoulder 2.5 m long Double clip ( bridge clip) Single clip M.S. tube 40 mm dia Wall form panel 1250x450 mm Corner angle 45x45x5 m 2.50 m long Column clamp 450x1070 m Prop 2 m ( 2-3.5m) Gun metal cramp

kilogram each each each each each each each each each each each metre each each each each kilogram

per test per test litre litre litre each each each each each 1000 Nos sqm metre sqm

sqm kilogram sqm tonne each

Local Market Rates : 2249 of 2298

DSR-12

1042 1043 1044 1045 1046 1047 1048 1049 1050 1051

7339 7342 7343 7344 7345 7346 7347 7348 7349 7354

1052 1053 1054 1055 1056 1057

7358 7359 7361 7363 7364 7366

1058

7367

1059

7369

1060

7375

1061

7376

1062

7377

1063

7378

1064

7379

1065 1066

7380 7381

1067 1068 1069 1070 1071 1072 1073 1074

7382 7387 7388 7389 7390 7391 7392 7393

1075

7394

1076 1077 1078 1079 1080 1081 1082 1083 1084

7395 7396 7397 7398 7399 7400 7401 7402 7403

Stainless steel cramp Adjustable span ESO+SI (2.35-3.40) Adjustable telescopic prop 3 m (2.02-3.75 m) Beam clamp 300-380 mm (450-1070 mm) Prop 4 m Double coupler Cadmium plated full threaded steel screws (30x4 mm dia.) Aluminium washer 2 mm thick 15 mm dia 12 mm M.S. ‘U’ beading Plastic encapsulated M.S. foot rest 30x20x15 cm Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessorie P.V.C. automatic flushing cistern 5 lts capacity P.V.C. automatic flushing cistern 10 lts capacity 15 mm C.P. brass tap with elbow operation lever White glazed fire clay draining board 600x450x25 mm Glass reinforced Gyp sum ( GRG) board 8.5 mm thick Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm Galvanised M.S. sheet 0.50 mm thick pressed stud. 48x34x36 mm

kilogram each each each set each each 100 Nos 100 Nos metre each each

G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urina G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two lipped G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three lipp G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four lippe White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x3 Precast R.C.C. grating with frame 500x450 mm horizontal grating

each

Precast R.C.C. grating with frame 450x100 mm vertical grating Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887-1995

each tonne

Spigot for standerd jointing Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt Anodising 15 microns on aluminium sections Neoprene/EPDM rubber gasket Anodising 25 microns on aluminium sections Powder coating 50 microns on aluminium sections. Polyester powder coating 50 microns on aluminium sections Double action hydraulic floor spring with stainless steel cover plate

One Kg each kilogram metre kilogram kilogram kilogram each

6 mm dia. G.I. adjustable hangers including clips (up to 1.2 m length)

each

Double action hydraulic floor spring with brass cover plate Base Jack Challies Cup Locks 15 mm PTMT bib cock 15 mm PTMT bib cock with flange (fancy) 15 mm PTMT bib cock long body with flange 15 mm dia PTMT stop cock(male thread)

each Each Each Each each each each each

each each each each sqm metre metre

each each each each each

Local Market Rates : 2250 of 2298

DSR-12

1085 1086 1087 1088 1089 1090 1091

7405 7406 7407 7408 7409 7410 7411

1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104

7412 7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7426

1105 1106 1107 1108 1109 1110

7427 7428 7429 7430 7431 7432

1111 1112 1113 1114 1115 1116 1117

7439 7442 7443 7444 7445 7449 7451

1118

7452

1119

7453

1120

7468

1121

7477

1122

7478

1123

7479

1124

7480

1125

7485

1126 1127

7486 7491

20 mm dia. PTMT stop cock PTMT pillar cock PTMT push cock 15 mm dia. PTMT push cock 12 mm dia. 20 mm BSP PTMT grating 100 mm dia. PTMP. Pillar cock (fancy) 15mm foam flow 125 mm grating with waste hole Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia. (110 g Double acting air valve 50 mm Double acting air valve 80 mm Double acting air valve 100 mm Water meter (including testing charges) 80 mm Water meter (including testing charges) 100 mm Water meter (including testing charges) 150 mm Water meter (including testing charges) 200 mm Dirt box strainer 80 mm Dirt box strainer 100 mm Dirt box strainer 150 mm Dirt box strainer 200 mm Cat’s eye Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick)

each each each each each Each each each

Water stops Dumb bell with central bulb Kickers Wedge expansion hold fastener 1/4\" or 6 mm Wedge expansion hold fastener 3/8\" or 10 mm Wedge expansion hold fastener 1/2\" or 12 mm 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white

metre metre each each each sqm

Wheel 75 mm dia. 40 mm wide Aluminium single cleat of size 30x32x3 Aluminium grip strip of size 50x12x2 25 mm prelaminated flush door both side decorative Aluminium U beading Glass sheet (Pin headed) 4 mm thick Raj nagar plain white marble (table rubbed and polished) 18 mm thick

each each each sqm kilogram sqm sqm

Raj nagar plain white marble (table rubbed and polished) 18 mm thick above 0.20 sqm up to Veneered particle board with commercial veneering on both sides 12 mm thick Prelaminated particle board with one side decorative and other side balencing lamination Prelaminated particle board with one side decorative and other side balencing lamination f Prelaminated particle board with one side decorative and other side balencing lamination f Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width) Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width) PTMT Waste Coupling 31/32MM

sqm

each each each each each each each each each each each each metre

sqm sqm sqm sqm sqm metre metre Each

Local Market Rates : 2251 of 2298

DSR-12

1128 1129 1130

7492 7493 7494

1131

7495

1132

7496

1133

7497

1134

7498

1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169

7499 7500 7501 7503 7504 7505 7506 7507 7508 7509 7512 7513 7514 7515 7516 7517 7518 7552 7553 7555 7556 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664

1170

7665

1171

7666

1172

7668

1173

7669

PTMT Waste Coupling 38/40MM PTMT Bottle Trap 31/32MM PTMT Bottle Trap 38/40MM PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & H.D. Ball PTMT Ball Cock 20mm Complete with Epoxy Coated Aluminium Road & H.D. Ball PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball PTMT Ball Cock 40mm Complete with Epoxy Coated Aluminium Road &

Each Each Each each

PTMT Ball Cock 50mm Complete with Epoxy Coated Aluminium Road & H.D. Ball PTMT Angle Stop cock with Flange 15mm PTMT Swiveling shower 15mm PTMT Liquid Soap Container of 400ml capacity PTMT Towel Ring 215xd200x37mm PTMT Towel Rail (450MM) PTMT Towel Rail (600MM) PTMT Shelf 450x124x36mm PTMT Urinal Spreader 15MM PTMT Soap Dish/Holder 138x102x75mm PTMT handle 125x34x24mm PTMT handle 150x34x24mm PTMT butt hinges 75x60x10mm PTMT butt hinges 100x75x10mm PTMT Tower bolt 152x42x18mm PTMT Tower bolt 202x42x18mm PTMT door catcher 72x42mm Coir veneered board 4mm thick Coir veneered board 6mm thick Coir veneered board 12mm thick Coir veneered board 18mm thick Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 300mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 400mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 450mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 600mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000mm dia

each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200mm dia

Each

each each each

Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each sqm sqm sqm sqm Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre

Local Market Rates : 2252 of 2298

DSR-12

1174

7670

1175

7671

1176

7672

1177

7673

1178

7674

1179

7675

1180

7676

1181

7677

1182

7678

1183

7679

1184

7680

1185

7681

1186

7682

1187

7683

1188

7684

1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211

7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000mm dia

Each

Ductile Iron K - 12 specials suitable for push on jointing up to 600mm dia Ductile Iron K - 12 specials suitable for push on jointing over 600mm dia Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 up to 600mm dia Ductile Iron Specials suitable for mechanical jointing as per I.S. 9523 over 600mm dia Ductile Iron Pipe Class K-9 flanges and welding 100mm dia Ductile Iron Pipe Class K-9 flanges and welding 150 dia Ductile Iron Pipe Class K-9 flanges and welding 200mm dia Ductile Iron Pipe Class K-9 flanges and welding 250mm dia Ductile Iron Pipe Class K-9 flanges and welding 300mm dia Ductile Iron Pipe Class K-9 flanges and welding 350mm dia Ductile Iron Pipe Class K-9 flanges and welding 400mm dia Ductile Iron Pipe Class K-9 flanges and welding 450mm dia Ductile Iron Pipe Class K-9 flanges and welding 500mm dia Ductile Iron Pipe Class K-9 flanges and welding 600mm dia Ductile Iron Pipe Class K-9 flanges and welding 700mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 100mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 125mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 150mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 200mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 250mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 300mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 350mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 400mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 450mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 500mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 600mm dia

Quintal Quintal Quintal Quintal Metre metre Metre Metre metre Metre Metre Metre Metre Metre Metre Metre metre metre Metre Metre Metre metre Metre Metre Metre Metre

Local Market Rates : 2253 of 2298

DSR-12

1212

7708

1213

7709

1214

7710

1215

7711

1216

7712

1217

7713

1218

7714

1219

7715

1220

7716

1221

7717

1222

7718

1223

7719

1224

7720

1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238

7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734

1239

7735

1240 1241

7736 7737

1242 1243 1244

7738 7739 7741

1245 1246 1247 1248

7742 7743 7744 7745

S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing up S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing ove S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 1338 S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical joint as per IS 13382 Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000mm dia

Quintal

Extruded burnt flyash clay sewer bricks conforming to I.S 4885 - 1988

1000 Nos

Quintal Quintal Quintal Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre metre Metre Metre metre metre

Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894-1989 1000 Nos Calcium Silicate Bricks machine moulded confirming to I.S. 4139 - 1989 1000 Nos Modified Bitumen Refinery produced CRMB - 55 Tonne Modified Bitumen Refinery produced CRMB - 60 tonne Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-1995 tonne M.S. pipe 150 mm dia casing pipe M.S. pipe 200 mm dia casing pipe PVC blind pipe 150 mm dia as per IS: 12818

One Metre One Metre One Metre

Local Market Rates : 2254 of 2298

DSR-12

1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273

7746 7747 7748 7749 7750 7751 7752 7753 7755 7757 7758 7759 7760 7761 7762 7763 7764 7765 7766 7767 7768 7769 7770 7771 7775

1274

7800

1275

7801

1276

7802

1277

7803

1278

7804

1279

7805

1280

7806

1281

7807

1282

7808

1283 1284 1285 1286 1287 1288

7809 7850 7857 7858 7859 7861

1289

7862

1290 1291

7863 7864

PVC blind pipe 200 mm dia as per IS: 12818 M.S. cap 150 mm dia M.S. cap 200 mm dia M.S bail plug 150 mm dia M.S bail plug 200 mm dia PVC slotted pipe 150 mm dia as per IS: 12818 PVC slotted pipe 200 mm dia as per IS: 12818 Boulder 50 mm to 200 mm Gravel 1.5 mm to 2 mm M.S. pipe 100 mm dia casing pipe uPVC blind pipe 100 mm dia as per IS: 12818 uPVC slotted pipe 100 mm dia as per IS: 12818 M.S. cap 100 mm dia M.S. bail plug 100 mm dia Precast R.C.C. perforated slab Water supply tanker of 5000 litre capacity M.S. socket 100 mm dia M.S. socket 150 mm dia M.S. socket 200 mm dia Stone cleaning chemical approved by ASI Water repallent chemical approved by ASI Stone surface strengthening chemical approved by ASI Turpentine oil Liquid Amonia 5% Sodium pentachlorophenate Ceramic Glazed Tiles Ist quality minimum thickness 5mm in all colours shades and designs e Ceramic Glazed Tiles Ist quality 300 x 300mm in all shades and designs of White, Ivory, gr Ceramic Glazed Tiles Ist quality 300 x 300 in all shades designs except White, Ivory, Grey Rectified Ceramic Glazed Tiles Ist quality 300x 300 or more in all shades designs Whi Rectified Ceramic Glazed Tiles Ist quality 300 x 300 or more in all shades designs excep Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm X 578mm Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355mm

One Metre Each Each Each Each One Metre One Metre One Cum One Cum One Metre One Metre One Metre Each Each Each Each One Metre Each Each One Litre One Litre One Litre One Litre One Litre One Kg sqm

Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345mm

each

Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet

each

Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet

each

Agaria White marble slab plain 18mm thick P.T.M.T. Grating square slit 150mm P.T.M.T. Urinal cock 15mm dia P.T.M.T. Bib cock with nozzle 15mm P.T.M.T. Stop cock (concealed) 15mm 15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts P.T.M.T. extension nipple 15mm

sqm each each each each each

sqm sqm sqm sqm each each

each each

Local Market Rates : 2255 of 2298

1292 1293 1294

7865 7866 7900

1295

7901

1296

7902

1297 1298

7903 7904

1299

8001

1300 1301

8002 8003

1302 1303

8004 8006

1304 1305

8010 8011

1306 1307 1308 1309

8014 8100 8200 8201

1310

8203

1311

8204

1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322

8205 8206 8207 8210 8211 8212 8214 8215 8216 8217 8218

1323

8219

1324

8220

1325 1326 1327 1328 1329 1330 1331 1332

8221 8222 8223 8224 8225 8300 8301 8302

P.T.M.T. extension nipple 20mm P.T.M.T. extension nipple 25mm Common burnt clay Modular bricks of class designation 7.5 Machine moulded perforated FPS (non modular) bricks of class designation 12.5 Machine moulded modular perforated bricks of class designation 12.5

each each 1000 Nos 1000 Nos

Machine moulded common burnt clay F.P.S. (non modular) bricks of class designation 12.5 Machine moulded tile bricks of class designation 12.5 24 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections in 30 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections in Factory made PVC rigid foam paneled shutter i/c carriage Factory made PVC rigid foam paneled shutter as per IS : 4020 i/c carriage Factory made PVC rigid foam sheet 1mm thick 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded sections in white, grey or w Factory made door frame PVC extruded sheet i/c carriage Factory made door frame of size 50x47mm with wall thickness 5 mm made of single piecs extr Powder coated M.S. butt hinges 100mm X58mmX1.9mm A.P.P. modified polymeric felt (two layers) 1.5 mm thick A.P.P. modified polymeric felt (two layers) 2 mm thick A.P.P. modified 2 mm thick membrane reinforced with glass fibre matt

1000 Nos

1000 Nos

1000 Nos sqm sqm sqm sqm sqm Metre metre One Metre 10 Nos sqm sqm sqm

A.P.P. modified 3 mm thick membrane reinforced with glass fibre matt sqm A.P.P. modified 3 mm thick membrane reinforced with polyester matt sqm

DSR-12

Bitumen primer for bitumen membrane Geotextile 120 gsm membrane Stainless steel screws 50 mm Stainless steel screws 40 mm Stainless steel screws 30 mm Stainless steel screws 20 mm Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS : 12817 marked Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS : 12817 marked M.S. heavy weight but hinges 125x90x4.0mm IS : 1341 marked. M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked 1216 mm PE-AL-PE Composite pressure pipe 1620 mm PE-AL-PE Composite pressure pipe 2025 mm PE-AL-PE Composite pressure pipe

litre sqm 100 Nos 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos. 10 Nos 10 Nos Metre Metre Metre

Local Market Rates : 2256 of 2298

DSR-12

1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344

8303 8304 8305 8501 8502 8504 8505 8506 8507 8508 8509 8510

1345

8589

1346

8590

1347

8591

1348

8592

1349 1350

8593 8595

1351

8597

1352

8598

1353

8599

1354

8600

1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374

8601 8602 8604 8605 8606 8607 8608 8609 8610 8611 8612 8613 8614 8615 8616 8617 8620 8621 8622 8623

1375

8625

2532 mm PE-AL-PE Composite pressure pipe 3240 mm PE-AL-PE Composite pressure pipe 4050 mm PE-AL-PE Composite pressure pipe Polymer modified cementation coating Fibre glass cloth Multi surface paint Acrylic exterior paint Premium Acrylic exterior paint Textured exterior paint Primer for cement paint Special Primer (C.W.) Metal Primer (U.G.) Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick Galvanised Steel main Tee ceiling section Size 24 x 38 x 0.33 mm (3 metre long) Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00 metre long) Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33 mm (1.2 metre long) Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33 mm ( 0.6 metre long) Wooden screws with plastic rawl plugs 35x8 mm GI Metal Tile Clip in Plain Beveled edge global white colour tiles of size 600x600 mm and GI Metal Tile Clip in Perforated Beveled edge global white colour tiles of size 600x600 mm G.I Metal Tile Lay-in plain Tegular edge global white color tiles of size 595x595mm and 0. GI Metal Tile Lay-in Perforated Tegular edge global white color tiles of Size 595x595 mm a PVC Laminated Gypsum Tiles (Square edge) of Size 595x595 mm and 12.5 mm thick Polished Porcelain floor tiles 50x50 cm Spring T-section 24x34x0.45 mm (3.00 meter long) C Wall angle section 20x30x20x0.50 mm (3.00 meter long) Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long) Spring T-connector C Carrier Connector C Suspension Clip Wire Coupling Clip Main T ceiling sections 24x38x0.3 mm (3 metre long) Perimeter wall angle 21x21 mm (3 metre long) Intermediate cross channel (1.2 mtrs) Intermediate cross channel (1.6 mtrs) Hanger rod 0.5 mm thick Adjustment clip Soffit cleat Vitrified floor tile 50x50 cm Vitrified floor tile 60x60 cm Vitrified floor tile 80x80 cm Vitrified floor tile 100x100 cm Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4 - 16 Outer dia

Metre Metre Metre kilogram sqm litre litre litre litre litre litre litre One Sqm Each Each Each Each Each One Sqm One Sqm One Sqm One Sqm One Sqm Sqm One Metre One Metre One Metre Each Each Each Each each each each each each each each sqm sqm sqm sqm Metre

Local Market Rates : 2257 of 2298

DSR-12

1376

8626

1377

8627

1378

8628

1379

8629

1380

8630

1381

8631

1382

8632

1383

8633

1384

8634

1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397

8635 8636 8637 8638 8639 8640 8641 8642 8643 8644 8645 8646 8647

1398

8648

1399

8649

1400

8650

1401

8651

1402

8652

1403 1404 1405 1406 1407 1408 1409 1410 1411

8653 8654 8655 8656 8657 8658 8659 8660 8661

1412 1413

8662 8663

Poly propylene - Random - Co - Polymer (PPR) pipes SDR 7.4 - 20mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 25 mm outer dia. Poly propylene - Random - Co - poymer (PPR) pipes SDR 7.4 - 32 mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 40mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 50mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 63mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 75mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 90mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11 - 110mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11- 160mm Outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia. Silicon sealant. Stainless steal screws 30mm x4mm. Hermetically sealed double glazed unit made with 6mm thick clear float glass both side ha Stainless steel (SS 304 grade) adjustable friction window stay. 205 x19mm Stainless steel (SS 304 grade) adjustable friction window stay 255 x19mm Stainless steel (SS 304 grade) adjustable friction window stay. 355 x19mm Stainless steel (SS 304 grade) adjustable friction window stay. 510 x 19 mm Stainless steel (SS 304 grade) adjustable friction window stay. 710 x 19mm Masking tape. Autoclaved aerated cement (AAC) blocks. Gypsum panel 666 X 500 X 100 mm size. Bonding plaster for Gypsum panel. Mechanised Autoclaved fly ash sand lime non modular bricks. Water proof ply 12mm thick. Aluminium casement window fastener (Anodised AC 15 ) Aluminium casement window fastener (powder coated ). Aluminium casement window fastener (polyester powder coated).

Metre

Aluminium round shape handle (anodised AC 15)

each

Metre Metre Metre Metre Metre Metre Metre Metre Metre metre metre metre metre metre metre metre metre metre metre cartridge cent sqm each each each each each metre cum sqm kg 1000 Nos sqm each each each

Local Market Rates : 2258 of 2298

DSR-12

1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427

8664 8665 8666 8667 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677

1428 1429 1430 1431 1432 1433 1434 1435 1436 1437

8678 8682 8683 8684 8685 8686 8687 8688 8689 8690

1438 1439 1440 1441

8691 8692 8693 8694

1442

8695

1443

8696

1444

8697

1445 1446 1447 1448

8698 8699 8700 8703

1449

8704

1450 1451

8705 8706

1452

8707

1453

8708

1454 1455

8709 8710

1456

8712

Aluminium round shape handle (powder coated) Aluminium round shape handle (polyester powder coated). Stainless steel screws 25mm x4mm UV stabilised 2 mm thick plain FRP sheet . UV stabilised 2 mm thick corrugated FRP sheet . Mangalore ridge tiles 20mm thick. Mangalore tiles 20mm thick. Precoated galvanised iron profile sheet 0.50 mm TCT Precoated galvanised steel plain ridges. Precoated galvanised steel flashings/aprons. Precoated galvanised steel gutter Precoated galvanised steel north light curves. Precoated galvanised steel barge board. Precoated galvanised steel crimp curve 1mm thick 35mm wide bright finished stainless steel piano hinges .

each each cent sqm sqm each each sqm metre metre metre metre metre sqm metre

Epoxy Grout Red sand stone gang saw cut 30mm thick. White sand stone gang saw cut 30mm thick. Delineator Precast C.C. Kerb stone M - 25 Thermoplastic paint Glass beads Interlocking C.C. paver block ( 60 mm thick, M-30 ) High intensity retro - reflective sheet. Punched tape concertina coil 600 m dia. 10m openable length (Total length 90m) RBT reinforced barbed wire. Turn buckle and strengthening bolt. Precast pavement slab 450 x 450 x 50mm (M - 30). Chain link fabric fencing mesh of size 50x50mm made of G.I. wire of dia. 4mm. Chain link fabric fencing mesh of size 50x50mm made of G.I. wire of dia. 4mm, PVC coated Chain link fabric fencing mesh of size 25x25mm made of G.I. wire of dia. 3mm. Stainless steel cramps with nuts, bolts and washer for dry stone cladding . 8 mm thick tapered edge calcium silicate board . 10 mm thick calcium silicate board. Telescopic drawer channels 300mm long . Stainless steel roller for sliding arrangement in racks/ cupboards/ cabinets shutter . 50mmX42mmX2mm thick Factory made door frame of PVC extruded sections in white, grey or wo 25mm thick factory made PVC flush door shutter i/c carriage. Factory made glass reinforced plastic door frame 90x45 mm i/c carriage. 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage. 30mm thick factory made solid PVC profile panelled doort single piece extruded profile dec Factory made solid PVC door frame 60 x 30mm i/c carriage. 30 mm thick factory made solid PVC profile panelled door single piece extruded profile non

One Kg sqm sqm each cum kg kg sqm sqm bundle metre each set each sqm sqm sqm each sqm sqm set each metre sqm metre sqm One Sqm metre One Sqm

Local Market Rates : 2259 of 2298

DSR-12

1457 1458 1459 1460 1461

8713 8714 8715 8716 8717

1462

8719

1463

8720

1464 1465 1466 1467 1468 1469 1470

8721 8722 8723 8724 8725 8726 8727

1471 1472

8730 8731

1473

8732

1474

8733

1475

8735

1476

8736

1477

8737

1478

8738

1479 1480 1481

8739 8740 8741

1482 1483 1484

8742 8743 8744

1485

8745

1486 1487 1488 1489

8750 8751 8752 8753

1490

8754

1491

8755

1492

8756

1493

8757

Fiber glass reinforced plastic chajja. Magnetic catcher triple strip vertical type. Magnetic catcher double strip horizontal type. 100 mm mortice lock with 6 levers for aluminium door. 12.5 mm thick Glass fibre reinforced Gypsum board . 2nd class teak wood lipping/ moulded beading or Taj beading of size 18X5mm Ceiling sections 0.55 mm thick having a knurled web of 51.55mm and two flanges of 26mm e Perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0 Nylon sleeves & wooden screws (40mm) Counter sunk ribbed head screw 25mm. 12mm thick marine plywood conforming to IS:710 12mm thick fire retardant plywood conforming to IS: 5509. 1.5 mm thick decorative laminated sheet 1.0 mm thick decorative laminated sheet 30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c carriage. High polymer modified quickset tile adhesive Synthetic ployster triangular fibre of length 12mm, effective diameter 10-40 microns and s Synthetic ployster triangular fibre of length 6mm, effective diameter 10-40 microns and sp 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile dec Stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50 mm dia wire Factory made door frame fire rated ( 60 minutes) made with 16 SWG G.I. Sheet of section 14 Fire rated door shuttere made with 16 SWG G.I. sheet( 60 minutes) without panel Fire seal putty Clear fire resistant glass panes 6mm thick (60 minutes) G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/sqm) with ceramic tape of suitabl Matrix Mineral Board Panic Bar / latch (Double point) 65mm x 55mm x 2mm thick Factory made door frame of PVC extruded section in white,grey or w Zinc alloy (white powder coated) casement handle for uPVC windows

sqm each each each sqm metre

Zinc alloy (white powder coated) Touch Lock for uPVC windows Zinc alloy rollers for uPVC windows Zinc alloy rollers for uPVC door Zinc alloy (white powder coated) casement lock for uPVC windows

Each Each Each Each

Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for uPVC windows Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for uPVC windows Stainless steel friction hinge of size 300 mm x 19 x 1.9 mm for uPVC windows

Each

metre metre each cent sqm sqm sqm sqm sqm per kg one kg one kg One Sqm One Sqm One Sqm One Metre One Sqm One Kg One Sqm One Metre One Metre Each One Metre Each

Each Each

Local Market Rates : 2260 of 2298

DSR-12

Stainless steel friction hinge of size 350 mm x 19 x 1.9 mm for uPVC windows Stainless steel friction hinge of size 400 mm x 19 x 1.9 mm for uPVC windows uPVC extruded profile casement Window Sash/Mullion ( 67 mm x 75 mm)(Style,rail and interme uPVC extruded profile casement window glazing bead (35 mm x 18 mm) uPVC extruded profile Two Track Sliding frame (67 mm x 52 mm)

Each

uPVC extruded profile Sliding window Sash (60 mm x 44 mm) uPVC extruded profile Sliding Interlock for Window (one vertical length in each shutter) ( uPVC extruded profile Sliding Door Sash (80 mm x 44 mm) Aluminium Track on bottom rail for uPVC window Wool Pine for uPVC window Aluminium Grill (anodised) Steel Galvanised tubular reinforcement for uPVC door/ window

One Metre One Metre

8775 8776 8778 9999 LABOUR :

Stainless steel dash fastener of 8 mm dia and 75 mm long bolt Toughened glass 12 mm thickness Co-efficeint for L.S. items (149/100)

Each One Sqm L.S.

0003 0100 0101 0102 0103 0111 0112 0113 0114 0115 0116 0117 0119 0122 0123 0124 0125 0126 0127 0128 0130 0131 0132 0133 0134 0135 0138 0139 0141 0155 0156

Hire charges of Diesel Road Roller - 8 to 10 tonne Bandhani Bhisti Blacksmith 1st class Blacksmith 2nd class Carpenter 1st class Carpenter 2nd class Chowkidar Beldar Coolie Fitter (grade 1) Assistant Fitter or 2nd class Fitter Glazier Mason (for plaster of paris work) 1st class Mason (brick layer) 1st class Mason (brick layer) 2nd class Mason (for plain stone work) 2nd class) Mason (for ornamental stone work) 1st class Driver (for Road Roller, Concrete Mixer, Truck etc.) Mate Mistry Painter Rock Excavator Rock Breaker Rock Hole Driller Stone Chiseller Sprayer (for bitumen, tar etc.) Skilled Beldar (for floor rubbing etc.) White Washer Mason (average) Carpenter (average)

L.S. Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day

1494

8758

1495

8759

1496

8766

1497

8767

1498 1499

8768 8769

1500 1501 1502 1503 1504

8770 8771 8772 8773 8774

1505 1506 1507 1508

Each One Metre One Metre One Metre

One Metre One Metre One Metre One Kg One Metre

Local Market Rates : 2261 of 2298

0157 0159 0160 0161 0768 1235 2342 7754 7772

DSR-12

Operator (Pile/ Special machine) Skilled torch operator for laying tack Technician Helper (technician) Cement Concrete Jali 50 mm thick Diesel oil Carraige of Solvent/ Diesel. Gravel 5 mm to 10 mm Pea Gravel

Day Day per day per day Day litre quintal Day Day

Local Market Rates : 2262 of 2298

12)

Rate 800.00 800.00 350.00 1600.00 250.00 300.00 130.00 775.00 500.00 300.00 300.00 5000.00 740.00 1700.00 5000.00 200.00 7500.00 325.00 400.00 4000.00 34000.00 2200.00 4200.00 35000.00 9250.00 30.00 750.00 6500.00 1350.00 1350.00 1800.00 900.00 2450.00 800.00 3.00 1550.00 460.00 1150.00 150.00 325.00 1200.00 800.00 23700.00 17500.00 2700.00 1000.00

DSR-12

Local Market Rates : 2263 of 2298

2500.00 900.00 700.00 360.00 14000.00 3000.00 35.00 250.00 200.00 200.00 200.00 280.00 200.00 150.00 310.00 390.00 395.00 140.00 514.00 250.00 182.00 206.00 475.00 490.00 500.00 850.00 900.00 950.00 1000.00 1050.00 1050.00 1050.00 1100.00 37.00 47.00 900.00 300.00 375.00 37000.00 28500.00 41400.00 37000.00 26.00 40.00 350.00 55.00 50.00 25.00 35.00 15.00 360.00

DSR-12

Local Market Rates : 2264 of 2298

270.00 315.00 350.00 325.00 235.00 155.00 455.00 325.00 20.00 18.00 5000.00 12000.00 400.00 70.00 800.00 650.00 400.00 175.00 2900.00 2600.00 900.00 2600.00 2300.00 2000.00 1600.00 300.00 250.00 150.00 500.00 350.00 300.00 225.00 175.00 140.00 90.00 140.00 120.00 85.00 140.00 125.00 95.00 160.00 150.00 350.00 300.00 160.00 700.00 675.00

DSR-12

Local Market Rates : 2265 of 2298

625.00 600.00 500.00 45.00 120.00 100.00 90.00 120.00 170.00 190.00 30.00 700.00 600.00 500.00 450.00 300.00 100.00 120.00 40.00 30.00 200.00 160.00 130.00 95.00 80.00 950.00 810.00 675.00 425.00 185.00 160.00 140.00 120.00 500.00 90.00 140.00 120.00 100.00 500.00 45.00 230.00 190.00

DSR-12

Local Market Rates : 2266 of 2298

150.00 115.00 100.00 180.00 250.00 330.00 130.00 80.00 60.00 45.00 35.00 60.00 50.00 40.00 30.00 25.00 5.00 130.00 80.00 55.00 45.00 320.00 300.00 225.00 190.00 105.00 100.00 80.00 110.00 105.00 85.00 40.00 90.00 80.00 45.00 40.00 40.00 35.00 25.00 20.00 17.00 15.00 14.00 120.00 100.00 75.00 70.00 50.00 45.00 35.00

DSR-12

Local Market Rates : 2267 of 2298

30.00 550.00 510.00 500.00 480.00 490.00 475.00 450.00 390.00 155.00 125.00 700.00 580.00 450.00 360.00 280.00 470.00 360.00 300.00 125.00 1600.00 1450.00 1300.00 1100.00 950.00 850.00 280.00 110.00 170.00 290.00 80.00 400.00 450.00 65.00 180.00 145.00 30.00 300.00 410.00 230.00 220.00 1000.00 180.00 180.00

DSR-12

Local Market Rates : 2268 of 2298

140.00 38.00 200.00 350.00 180.00 103.00 125.00 55.00 450.00 50.00 35.00 42.00 80.00 80.00 85.00 23.50 115.00 105.00 85.00 90.00 125.00 120.00 130.00 135.00 165.00 110.00 40.00 175.00 65.00 125.00 125.00 70.00 30.00 90.00 7.00 4.00 8.00 10.00 55.00 70.00 60.00 25.00 325.00 270.00 30.00 1150.00

DSR-12

Local Market Rates : 2269 of 2298

550.00 250.00 330.00 520.00 550.00 30.00 90.00 1120.00 640.00 4750.00 110.00 130.00 205.00 65.00 40.00 4100.00 4000.00 4050.00 4500.00 4500.00 4250.00 4250.00 4200.00 4150.00 4500.00 48.00 4600.00 270.00 30.00 4800.00 430.00 20.00 90.00 10.00 25.00 70.00 5175.00 15.00 20.00 15.00 5400.00 5400.00 35.00 20.00 9.00 60.00 1100.00 675.00 420.00

DSR-12

Local Market Rates : 2270 of 2298

925.00 60.00 65.00 280.00 155.00 170.00 120.00 270.00 175.00 165.00 185.00 900.00 915.00 700.00 105000.00 70000.00 80000.00 64000.00 72000.00 48000.00 30000.00 25000.00 25000.00 50000.00 65000.00 240.00 220.00 200.00 482.00 35.00 25.00 32.00 30.00 32.00 25.00 1.50 1.50 400.00 52.00 45.00 5400.00 110.00 4200.00 3950.00 300.00 260.00 225.00 11500.00 8.00 51.00 1750.00 100.00

DSR-12

Local Market Rates : 2271 of 2298

185.00 205.00 53.00 26.00 27.00 33.00 17.00 15.00 25.00 29.00 44.00 50.00 165.00 215.00 165.00 215.00 27.00 280.00 200.00 1415.00 980.00 4435.00 2210.00 115.00 145.00 205.00 90.00 15.00 25.00 30.00 15.00 11.00 14.00 15.00 17.00 22.00 32.00 40.00 45.00 67.00 84.00 106.00 118.00 290.00 650.00 90.00 3450.00 3550.00 5300.00 5600.00 335.00 240.00 380.00

DSR-12

Local Market Rates : 2272 of 2298

490.00 570.00 170.00 230.00 290.00 365.00 81.00 97.00 134.00 167.00 202.00 254.00 325.00 426.00 8.00 18.00 42.00 270.00 61.00 890.00 990.00 1630.00 170.00 210.00 470.00 187.00 233.00 240.00 310.00 260.00 350.00 335.00 490.00 395.00 530.00 137.00 187.00 40.00 60.00 70.00 100.00 135.00 180.00 390.00 480.00

DSR-12

Local Market Rates : 2273 of 2298

4.45 350.00 390.00 510.00 550.00 200.00 239.00 290.00 387.00 382.00 510.00 466.00 545.00 253.00 350.00 98.00 133.00 26.00 33.00 33.00 43.00 550.00 135.00 154.00 188.00 261.00 380.00 454.00 732.00 995.00 960.00 1125.00 1420.00 1730.00 1760.00 20.00 25.00 40.00 49.00 75.00

DSR-12

Local Market Rates : 2274 of 2298

89.00 109.00 121.00 172.00 210.00 256.00 283.00 330.00 36.00 53.00 91.00 130.00 1350.00 820.00 1525.00 310.00 293.00 40.00 55.00 40.00 495.00 170.00 115.00 158.00 200.00 125.00 308.00 263.00 198.00 70.00 104.00 195.00 460.00 740.00 190.00 270.00 315.00 305.00 370.00 450.00 650.00 900.00 1550.00 310.00 400.00 510.00 780.00

DSR-12

Local Market Rates : 2275 of 2298

1420.00 2030.00 2300.00 2600.00 3410.00 6550.00 9550.00 13500.00 675.00 580.00 405.00 55.00 62.00 340.00 750.00 680.00 10.00 11.00 13.00 13.00 14.00 15.00 27.00 29.00 35.00 1250.00 100.00 7.75 3100.00 3600.00 100.11 233.60 87.60 87.60 100.11 77.87 95.22 140.16 87.60 77.87 87.60 103.06 77.87 116.80 233.60 389.33 667.43 109.50 95.22 95.22

DSR-12

Local Market Rates : 2276 of 2298

87.60 87.60 87.60 87.60 87.60 87.60 77.87 77.87 191.48 319.12 737.68 911.78 2127.50 77.87 3191.25 77.67 77.67 87.60 77.67 95.22 191.48 256.77 319.12 519.11 737.68 911.78 1276.50 1740.68 2127.50 2127.50 3191.25 2127.50 4786.87 6382.50 6382.50 6382.80 87.60 77.87 191.48 319.12 519.11 737.68 911.78 1276.50 1740.68 2127.50 2127.50 3191.25 3191.25 3191.25 4786.87 6382.50 228.00 323.00

DSR-12

Local Market Rates : 2277 of 2298

275.00 67.50 87.75 129.50 191.25 230.50 310.00 450.00 340.00 580.00 35.00 44.00 65.00 70.00 75.00 95.00 60.00 535.00 21.00 46.00 46.00 31000.00 145.00 62.00 70.00 82.00 103.00 960.00 775.00 845.00 7300.00 680.00 35000.00 250.00 293.00 364.00 425.00 560.00

DSR-12

Local Market Rates : 2278 of 2298

2900.00 2450.00 210.00 1080.65 130.00 130.00 675.00 340.00 750.00 750.00 1150.00 1150.00 330.00 360.00 1050.00 1050.00 23.00 37500.00 31.00 33.00 5075.00 320.00 490.00 680.00 930.00 1650.00 995.00 130.00 530.00 2630.00 2650.00 3200.00 4000.00 9100.00 13500.00 17000.00 5822.50 175.00 1130.00 985.00 270.00 215.00 235.00

DSR-12

Local Market Rates : 2279 of 2298

175.00 275.00 240.00 430.00 310.00 465.00 350.00 565.00 450.00 610.00 475.00 560.00 630.00 780.00 850.00 395.00 303.00 525.00 405.00 505.00 700.00 215.00 270.00 370.00 270.00 355.00 335.00 440.00 370.00 260.00 190.00 175.00 185.00 130.00 215.00 246.00 118.00 8460.00 4500.00 325.00 120.00 220.00

DSR-12

Local Market Rates : 2280 of 2298

240.00 270.00 48.00 58.00 65.00 50.00 25.00 72.00 68.00 270.00 32.00 272.00 200.00 15.00 1850.00 610.00 660.00 470.00 500.00 250.00 300.00 425.00 890.00 1550.00 3000.00 160.00 39.00 27.00 42.00 19.00 6.20 4.00 22.00 24.00 140.00 13.00 56.00 85.00 160.00 7.00 8100.00 927.00 230.00 237.00 271.00 315.00 75.00

DSR-12

Local Market Rates : 2281 of 2298

67.00 6.00 7.00 40.00 930.00 1010.00 270.00 305.00 10.00 20.00 40.75 419.40 26.25 15.00 390.00 45.00 58.00 810.00 21.00 18.00 17.00 470.00 545.00 4548.00 2409.60 13208.00 3029.60 12592.75 520.00 505.00 130.00 155.00 5150.00 4900.00 4200.00 2900.00 2950.00 2750.00 2050.00 1275.00

DSR-12

Local Market Rates : 2282 of 2298

1080.00 1500.00 475.00 390.00 260.00 300.00 670.00 170.00 21.00 27.00 26.00 28.00 685.00 975.00 1400.00 170.00 225.00 690.00 600.00 560.00 660.00 630.00 1030.00 1150.00 1780.00 1930.00 1850.00 1580.00 1630.00 1385.00

DSR-12

Local Market Rates : 2283 of 2298

66500.00 100.00 46.00 42.00 3100.00 60.00 22.00 67.00 129.00 16.00 20.00 34.00 52.00 50.00 81.00 95.00 128.00 115.00 180.00 56.00 95.00 107.00 207.00 16.00 31.00 145.00 204.00 65.00 230.00 360.00 315.00 350.00 250.00 1630.00 1825.00 33200.00 40300.00 48500.00 15000.00 23000.00

DSR-12

Local Market Rates : 2284 of 2298

29500.00 15000.00 23500.00 37.00 120.00 170.00 325.00 330.00 350.00 350.00 370.00 12150.00 460.00 39.00 870.00 40000.00 160.00 1550.00 1640.00 220.00 320.00 38500.00 8.00 9.00 12.00 14.00 36.50 1050.00 38.00 50.00 62.00 80.00 16.00 18.00 300.00 1160.00 97.00 77.00 280.00 1040.00 340.00 1220.00 830.00 305.00

DSR-12

Local Market Rates : 2285 of 2298

320.00 1825.00 1150.00 422.00 1170.00 55.00 28.00 10.00 14.00 110.00 640.00 490.00 530.00 600.00 525.00 230.00 60.00 72.00 440.00 1010.00 1240.00 1800.00 1440.00 650.00 305.00 27700.00 45.00 48.00 40.00 25.00 50.00 64.00 70.00 1525.00 28.00 1675.00 180.00 800.00 75.00 100.00 140.00 160.00 100.00

DSR-12

Local Market Rates : 2286 of 2298

130.00 160.00 90.00 80.00 31.00 225.00 37.00 101.00 3370.00 4930.00 6400.00 2030.00 3150.00 4560.00 5100.00 2620.00 4180.00 5420.00 7550.00 180.00 390.00 351.00 360.00 12.00 14.00 26.00 480.00 60.00 13.00 10.00 790.00 208.00 255.00 610.00 680.00 480.00 690.00 810.00 880.00 720.00 39.00 49.00 51.00

DSR-12

Local Market Rates : 2287 of 2298

64.00 317.00 345.00 134.00 195.00 420.00 780.00 1150.00 130.00 87.00 145.00 116.00 192.00 226.00 258.00 127.00 120.00 30.00 34.00 42.00 56.00 65.00 80.00 27.00 272.00 367.00 622.00 950.00 797.00 1170.00 1595.00 2105.00 2680.00 3225.00 4350.00 5085.00 6180.00 7430.00 10050.00 11350.00 11990.00 14030.00 15750.00 26.00 36.00 62.00

DSR-12

Local Market Rates : 2288 of 2298

73.00 103.00 127.00 234.00 260.00 285.00 352.00 542.00 636.00 684.00 915.00 1138.00 11850.00 16280.00 12540.00 17580.00 2025.00 2825.00 3740.00 4935.00 6330.00 8020.00 9645.00 11675.00 13895.00 18760.00 23275.00 830.00 1040.00 1240.00 2120.00 2830.00 3740.00 4500.00 5870.00 7100.00 8250.00 11450.00

DSR-12

Local Market Rates : 2289 of 2298

5850.00 7500.00 8200.00 8880.00 1260.00 1960.00 3170.00 3730.00 4770.00 6080.00 7890.00 9940.00 12390.00 15330.00 708.00 1035.00 1415.00 1920.00 2638.00 3135.00 3714.00 4411.00 5214.00 6801.00 8739.00 11156.00 14617.00 15485.00 3900.00 3300.00 3600.00 38500.00 38800.00 28200.00 1042.00 1250.00 460.00

DSR-12

Local Market Rates : 2290 of 2298

834.75 150.00 180.00 170.00 200.00 465.15 840.00 332.00 625.00 750.00 385.00 390.00 120.00 140.00 750.00 600.00 165.00 200.00 250.00 164.01 1586.25 1017.17 67.50 160.80 630.00 295.00 360.00 367.00 510.00 535.00 3630.00 1690.00 1470.00 392.00 424.00 1090.00 77.00 94.00 133.00 173.00 33.00 38.00 32.00

DSR-12

Local Market Rates : 2291 of 2298

38.00 57.00 3150.00 4150.00 3800.00 3550.00 3700.00 2025.00 2125.00 2025.00 2420.00 173.00 142.00 330.00 450.00 79.00 59.00 99.00 167.00 207.00 245.00 71.00 32.00 240.00 195.00 145.00 95.00 240.00 215.00 145.00 125.00 320.00 230.00 195.00 320.00 160.00 83.00 70.00 90.00 111.00 143.00

DSR-12

Local Market Rates : 2292 of 2298

193.00 310.00 335.00 127.00 39.00 272.00 130.00 230.00 198.00 63.00 83.00 107.00 858.00 192.00 125.00 77.00 39.00 0.55 894.00 998.00 809.00 906.00 468.00 484.00 180.00 155.00 164.00 5.00 11.00 11.00 9.00 187.00 118.00 72.00 34.00 7.00 6.00 3.00 735.00 865.00 1070.00 1630.00 32.00

DSR-12

Local Market Rates : 2293 of 2298

50.00 76.00 124.00 196.00 286.00 445.00 640.00 1020.00 1070.00 2255.00 51.00 63.00 90.00 120.00 170.00 280.00 835.00 1185.00 1640.00 2870.00 307.00 29.00 2290.00 168.00 189.00 236.00 437.00 793.00 1.55 2025.00 455.00 53.00 4300.00 645.00 40.00 41.00 42.00 49.00

DSR-12

Local Market Rates : 2294 of 2298

54.00 59.00 32.00 465.00 538.00 29.00 10.20 435.00 440.00 440.00 455.00 455.00 445.00 475.00 37.00 500.00 400.00 435.00 310.00 4025.00 63.00 62.00 325.00 1525.00 730.00 8.50 40.00 55.00 258.00 285.00 340.00 84.00 223.00 370.00 135.00 8.00 135.00 2050.00 365.00 1715.00 2500.00 270.00 2120.00

DSR-12

Local Market Rates : 2295 of 2298

3460.00 15.00 12.00 310.00 160.00 25.00 39.00 25.00 1.90 72.00 825.00 860.00 475.00 350.00 1975.00 16.00 365.00 365.00 2088.00 2536.00 760.00 0.00 4850.00 675.00 19800.00 247.00 61.85 5000.00 318.00 150.00 100.00 50.00 80.00 100.00 225.00 275.00 350.00

DSR-12

Local Market Rates : 2296 of 2298

400.00 500.00 250.00 78.00 235.00 212.00 45.00 275.00 20.00 15.00 250.00 50.00 20.00 1800.00 1.49 0.00 1500.00 260.00 260.00 301.00 273.00 301.00 273.00 247.00 247.00 247.00 301.00 273.00 273.00 301.00 301.00 273.00 273.00 301.00 301.00 260.00 301.00 273.00 247.00 247.00 247.00 260.00 260.00 260.00 260.00 287.00 287.00

DSR-12

Local Market Rates : 2297 of 2298

327.00 301.00 700.00 300.00 210.00 41.29 8.76 650.00 650.00

DSR-12

Local Market Rates : 2298 of 2298

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF