COSHH Risk Assessment - Hardtop XP

 

 

COSHH RISK ASSESSMENT

Project Name:

CSR Wagon Coating Rehabilitation 

Project Duration:

15th July to 20 October 2014

Hardtop XP 

Jotun Limited

Client

ETIHAD RAIL Abu Dhabi  CSR

Contractor: Location of job:

FAMECO Contracting LLC. Abu Dhabi. Western Region Abu Dhabi, UAE Al Ruwais,general

Prepared by:

Muhammad Tayyab

Owner

HSE officer [email protected] 

+971 55 3146060 Fameco General Contracting LLC, Abu Dhabi, UAE.

 

 

COSHH Risk Assessment Control of substances hazardous to health  Company name:

Dept. (if applicable): N/A

Fameco general contracting LLC. Abu Dhabi Describe the activity or work process. (Inc. how long/ how often this is carried out and quantity substance used)

Location of process being carried out?

Paint rehabilitation work for CSR wagons in Ruwais area. Spot blasting in paint damaged area and applying above mentioned paint system with airless spray pumps, rollers and paint brush. Etihad rail- Al Ruwais

Identify the persons at risk:

Employees

Name the substance involved in the process and its manufacturer.

Hardtop XP- Jotun Limited

(A copy of a current safety data sheet is attached to this assessment) 

Visitors

 √ 

 √ 

Public

UN Number: 1263 Class: 3 Packing Number: III

Classification ( state state the category of danger  ) 

Very Toxic

 √ 

 √ 

Toxic

Extremely

Irritant-dermatitis causing

Flammable

Sensitising

Highly Flammable

 √ 

Corrosive

Biological

√ 

Flammable

Harmful-lung

Oxidising

 √ 

Environmental 

damage if swallowed

This product has carcinogenic effect having adverse affects on fertility. Hazard Type

√ 

√ 

Gas Vapour Route of Exposure

Mist

Fume

 √ 

Dust

√ 

√ 

√ 

√ 

Inhalation

Skin

Eyes

Ingestion

Liquid

Solid

Other (State)

√ 

Other

(State) Injection with high Gun pressure

 

  Workplace Exposure Limits (WELs)  please indicate n/a where not applicable  Long-term exposure level

Short-term exposure level

441 mg/m³ 15 minute(s). 100 ppm 15 minute(s). Flash point

32°C (89,6°F) Density

1.286 g/cm3 Risk Phrase

R11- Highly flammable. R10- Flammable. R45- May cause cancer. R61cause harm to the unborn R62- May Possible risk of impaired fertility.child. R20- Also harmful by inhalation. R20/21- Also harmful by inhalation and in contact with skin. R65- Also harmful: may cause lung damage if swallowed. R37- Irritating to respiratory system. R38- Irritating to skin. R43- May cause sensitisation by skin contact. R33- Danger of cumulative effects. R66- Repeated exposure may cause skin dryness or cracking. R67- Vapours may cause drowsiness and dizziness. R50/53- Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R51/53- Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Safety Phrases:

S53- Avoid exposure - obtain special instructions before use. S23- Do not breathe vapour / spray. S36/37- Wear suitable protective clothing and gloves. S38- In case of insufficient ventilation, wear suitable respiratory equipment. S45- In case of accident or if you feel unwell, seek medical advice immediately  

Control Measures:  Only use in well-ventilated areas. Use respirators approaching standard N95 Prevent spillages. Avoid naked flames. Avoid inhalation of vapours and contact with skin when undertaking fuelling operations. When using do not eat, drink or smoke. Never siphon by mouth. Avoid contact with skin. Select gloves tested.

 

  After using gloves, hands should be washed and dried thoroughly. Wear safety glasses or full-face shield if splashes are likely to occur. Vapor from product residues may create a highly flammable or explosive atmosphere inside the container. Do not cut, weld or grind used containers unless they have been cleaned thoroughly internally.  Avoid dispersal of spilt material and runoff and contact with soil.  

Waste disposal The generation of waste should be avoided or minimized wherever possible. Provide drip trays underneath empty containers to avoid spillage on ground. Dispose via a licensed waste disposal contractor. This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers may retain some product residues. Vapor from product residues may create a highly flammable or explosive atmosphere inside the container. Do not cut, weld or grind used containers unless they have been cleaned thoroughly internally.  Avoid dispersal of spilt material and runoff and contact with soil.

Is health surveillance or monitoring required? Yes 

 √ 

No 

Personal Protective Equipment (state type and standard) 

 √ 

 √ 

Dust mask

Suitable for chemical splashes

Visor  √ 

 A2P3 R 3M N95 

Respirator

 √ 

Goggles  √ 

Gloves

 √ 

Overalls  √ 

Footwear

 √ 

Sand blasting suit Mika- paint mixing

Other

First Aid Measures

General: In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an General: 

unconscious person. If unconscious, place in recovery position and seek medical advice. Inhalation:  Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is  irregular or if Inhalation: respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.  Skin contact:  contact: Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognised skin cleanser. Do NOT use solvents or thinners.  Eye contact:  contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Seek immediate medical attention.   Ingestion:  If swallowed, seek medical advice immediately and show the container or label. Keep person warm and at Ingestion:

rest. Do not induce vomiting.

 

  Handling/ Storage

Prevent the creation of flammable or explosive concentrations concentrations of vapours in air and avoid Vapor concentrations higher than the occupational exposure limits. In addition, the product should only be used in areas from which all naked lights and other sources of ignition have been excluded. Electrical equipment should be protected to the appropriate standard. To dissipate static electricity during transfer, earth the drum and connect to receiving container with bonding strap. Operators should wear antistatic footwear and clothing and floors should be of the conducting type. Keep away from heat, sparks and flame. No sparking tools should be used. Avoid contact with skin and eyes. Avoid the inhalation of dust, particulates, spray or mist arising from the application of this preparation. Avoid inhalation of dust from sanding. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Put on appropriate personal protective equipment. Never use pressure to empty. Container is not a pressure vessel. Always keep in containers made from the same material as the original one Comply with the health and safety at work laws. Additional information on storage conditions

Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep away from sources of ignition. No smoking. Prevent unauthorized access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Disposal of Substances & Contaminated Containers

Hazardous Waste 

 √ 

Skip

Return to Depot

Return to Supplier

Other

(If Other Please State):

Is exposure adequately controlled? Yes

 √ 

No 

Risk Rating Following Control Measures

High 

Medium 

Low

 √