Correas Cat..Equivalencias

ONE SAFE SOURCE

2008-2009

V-BELTS

V-Belt Sizing Guide • •

Belt size refers to the pulley groove width (B) for belts under and equal to 1⁄2 in. Belt size refers to the belt top width (A) for belts over 1⁄2 in. Belt Size 9.6 mm (3⁄8 in) 12.7 mm (1⁄2 in) 17.5 mm (11⁄16 in) 19.1 mm (3⁄4 in) 22.2 mm (7⁄8 in) 23.8 mm (15⁄16 in) 27.0 mm (1 1⁄16 in) 31.8 mm (1 1⁄4 in)

V-Belt Maintenance Tips

A Belt Top Width 10.72 mm (0.422 in) 13.89 mm (0.547 in) 17.48 mm (0.688 in) 19.05 mm (0.750 in) 21.51 mm (0.847 in) 23.83 mm (0.938 in) 26.97 mm (1.062 in) 32.94 mm (1.297 in)

B Pulley Groove Width 9.65 mm (0.380 in) 12.70 mm (0.500 in) 15.88 mm (0.625 in) 17.53 mm (0.690 in) 19.94 mm (0.785 in) 22.30 mm (0.878 in) 25.48 mm (1.003 in) 31.83 mm (1.253 in)

SAE effective length for COG and NON-COG belts equals: Outer circumference minus 9.65 mm (0.38 in) for 3/8 inch and 1⁄2 inch belt sizes. Outer circumference minus 14.48 mm (0.57 in) for 11⁄16 in and larger belt sizes.

V-Belts

Keep the V-Belts on your engine in good condition. V-Belt failure can cause malfunctions of the charging system and overheating. Regularly do the following: • Check for cracked, worn, or frayed belts. On matched belt sets, always replace the complete set. If just one belt is bad, uneven load on belts, pulleys, bearings, and shafts can occur. • Check pulley grooves to make sure they are not worn, damaged, or aligned incorrectly. Poor belt to pulley contact will result in rapid wear and short life. Using a tension gauge, check belt tension after installation and at every oil change. Adjust to ensure proper belt seating.

21-2

Non-Cog Type

Size 9.5 mm (3⁄8 in) 12.7 mm (1⁄2 in)

Length 1105 mm (43.5 in) 787 mm (31.0 in) 1016 mm (40.0 in) 1054 mm (41.5 in) 1092 mm (43.0 in) 1105 mm (43.5 in) 1118 mm (44.0 in) 1143 mm (45.0 in) 1168 mm (46.0 in) 1181 mm (46.5 in) 1194 mm (47.0 in) 1206 mm (47.5 in) 1232 mm (48.5 in) 1245 mm (49.0 in) 1257 mm (49.5 in) 1270 mm (50.0 in) 1283 mm (50.5 in) 1295 mm (51.0 in) 1308 mm (51.5 in) 1334 mm (52.5 in) 1346 mm (53.0 in) 1372 mm (54.0 in)

Set Part Number 9Y-7159 (2)

9N-1330 (3) 9N-1322 (2)

9N-1323 (2) 4N-8580 (2) 9L-6128 (2)

4N-8597 (2) 7W-3896 (2) 9L-6126 (2)

1397 mm (55.0 in) 1410 mm (55.5 in) 114-3542 (3) 1435 mm (56.5 in) 1460 mm (57.5 in) 1549 mm (61.0 in) 1588 mm (62.5 in) 1600 mm (63.0 in)

7N-8518 (2) 9N-3483 (2) 6N-0724 (2)

1664 mm (65.5 in)

068-8546 (2) 9L-6130 (2) 9L-2850 (3)

166-3360 (3) 166-3359 (3)

1829 mm (72.0 in) 1842 mm (72.5 in) 1854 mm (73.0 in)

166-3363 (3) 127-4767 (2)

Size 12.7 mm (1⁄2 in)

17.5 mm (11⁄16 in)

Length 1880 mm (74.0 in) 1905 mm (75.0 in) 1981 mm (78.0 in) 2083 mm (82.0 in) 2134 mm (84.0 in) 2184 mm (86.0 in) 2286 mm (90.0 in) 2288 mm (90.1 in) 1524 mm (60.0 in) 1664 mm (65.5 in)

Set Part Number 166-3361 (3)

9N-1326 (3) 9N-1327 (2) 9N-2802 (3)

23.8 mm (15⁄16 in)

1740 mm (68.5 in) 1892 mm (74.5 in) 1956 mm (77.0 in) 2057 mm (81.0 in) 2286 mm (90.0 in) 1384 mm (54.5 in) 1460 mm (57.5 in) 1638 mm (64.5 in) 2019 mm (79.5 in) 2083 mm (82.0 in)

166-3365 (3) 166-3366 (3) 166-3364 (3) 1W-8043 (2) 9Y-8864 (2) 9Y-0291 (2) 6N-3637 (2) 5R-7276 (2) 7M-0305 (3) 6L-1987 (2)

Single Belt Number 1W-9693 166-3353 8M-0760 9Y-1954 7E-3898 1W-8908 4W-5825 117-0030 9N-1321 7C-9001 9N-1320 9N-1320 6N-7721 166-3357 166-3358 166-3356 1W-8044 9Y-8865 9Y-0290 6N-3636

3L-9489

V-Belts

1689 mm (66.5 in) 1714 mm (67.5 in) 1727 mm (68.0 in) 1753 mm (69.0 in) 1803 mm (71.0 in)

Single Belt Number 2W-2531 7C-2163 7C-8236 1P-9744 4N-7335 9N-1329 1N-3743 2P-6820 2P-6819 4N-9891 9Y-1131 2P-6818 1W-2934 1P-3085 4P-0454 1P-4334 3P-0130 2P-6212 9Y-6117 4N-6130 2P-4191 068-0610 9L-6125 9L-6125 8N-0503 2P-4685 2S-2743 4N-7610 2P-4230 1P-6868 1P-4313 2P-6161 9L-4479 2P-8720 2P-8720 1N-4556 2P-6532 166-3354 166-3352 1W-6039 166-3351 7W-5207 166-3355 127-4766 1N-3795

Number in parentheses ( ) after the set part number indicates the quantity of belts per set.

21-3

Cog Type

Size

Length

Set Part Number

Single Belt Number

Size

Length

9.5 mm (3⁄8 in)

737 mm (29.0 in)

6L-6213 (2)

6L-6212

12.7 mm (1⁄2 in)

1283 mm (50.5 in)

5L-4995 (2)

5L-4996

914 mm (36.0 in)

1N-8405 (2)

1N-8404

1308 mm (51.5 in)

3N-1491 (2)

5M-8135

1016 mm (40.0 in)

7L-4528 (2)

030-2630

9S-6760 (3)

5M-8135

1257 mm (49.5 in)

2N-0159 (2)

1N-9310

9L-0895 (2)

9L-0894

1283 mm (50.5 in)

7N-3157 (2)

9L-1554 (3)

9L-0894

12.7 mm (1⁄2 in)

1308 mm (51.5 in)

7L-5091 (2)

7L-5090

1410 mm (55.5 in)

7N-3158 (2)

7N-3159

3S-8448 3S-8448

4H-0552

1346 mm (53.0 in)

5L-3308 (2)

5L-3307

2L-1478

1359 mm (53.5 in)

4N-8771 (2)

3S-6272

9L-2267 (2)

9L-2266

838 mm (33.0 in)

004-0909

851 mm (33.5 in)

061-8384

864 mm (34.0 in)

036-6775

876 mm (34.5 in)

7E-0744

889 mm (35.0 in)

030-3289

902 mm (35.5 in)

037-2448

914 mm (36.0 in)

036-2176

940 mm (37.0 in)

030-3291

8L-4526 (3) 1372 mm (54.0 in)

3S-6272 061-7140

130-3216 (2)

061-7140

9L-1557 (2)

9L-1553

9L-4034 (3)

9L-1553

1410 mm (55.5 in)

2S-2756 (2)

2S-2743

1422 mm (56.0 in)

5N-9303 (2)

3S-3964

1448 mm (57.0 in)

9L-1127 (2)

9L-1128

9L-3047 (3)

9L-1128 3S-3961

1397 mm (55.0 in)

952 mm (37.5 in)

5L-3980 (2)

5L-3979

1460 mm (57.5 in)

4W-6025 (2)

991 mm (39.0 in)

2W-0237 (2)

1N-4635

1473 mm (58.0 in)

9L-1226 (2)

7L-5001

8N-3504

1486 mm (58.5 in)

2S-9779 (2)

2S-5218

1016 mm (40.0 in)

9L-4896

1029 mm (40.5 in)

001-5645

5N-6098 (3)

2S-5218

1499 mm (59.0 in)

2N-2297 (2)

6L-5115

1041 mm (41.0 in)

9L-1125 (2)

9L-1126

6L-5117 (3)

6L-5115

1054 mm (41.5 in)

9L-4226 (2)

4M-6291

1511 mm (59.5 in)

7E-5799 (3)

7E-5798

1080 mm (42.5 in)

2N-1493 (2)

061-7139

1524 mm (60.0 in)

9L-1106 (2)

2S-9506

1092 mm (43.0 in)

9L-4013 (2)

9L-4012

9L-3599 (3)

2S-9506

1105 mm (43.5 in)

1N-4223 (2)

6L-4100 (2)

5N-4692

5N-4693 (3)

5N-4693

8M-8341 (2)

8M-8336

9L-4325 (3)

8M-8336

1118 mm (44.0 in)

V-Belts

3S-8447 (2) 3N-4079 (3)

737 mm (29.0 in)

1003 mm (39.5 in)

1W-5555 068-5990

4N-2745 1549 mm (61.0 in)

1130 mm (44.5 in)

5L-3826 (2)

1143 mm (45.0 in)

3N-4658 (2)

4L-6060

1168 mm (46.0 in)

6L-7954 (2)

9M-1091 8L-8646

1600 mm (63.0 in)

9L-4480 (3)

9L-4479

1206 mm (47.5 in)

6L-8161 (2)

6L-3408

1626 mm (64.0 in)

8M-8340 (2)

8M-8335

1219 mm (48.0 in)

9L-0619 (2)

9L-3474 (3)

8M-8335

1194 mm (47.0 in)

1232 mm (48.5 in) 1245 mm (49.0 in) 1270 mm (50.0 in)

5L-3834 1575 mm (62.0 in)

9L-2248 6N-3113

1638 mm (64.5 in)

111-0575 (2)

6N-3113

1651 mm (65.0 in)

5N-6350 (2)

3K-3408

1257 mm (49.5 in) 8L-8984 (2)

2P-7333 8S-5154 (2)

4S-6209

5N-4876 (3)

4S-6209

6F-1992

1664 mm (65.5 in)

1S-4700 (2)

1S-4699

5M-8137

1689 mm (66.5 in)

4W-8729 (2)

5S-5249

Number in parentheses ( ) after the set part number indicates the quantity of belts per set.

21-4

1334 mm (52.5 in)

Single Belt Number

711 mm (28.0 in) 800 mm (31.5 in)

(Continued)

1321 mm (52.0 in)

Set Part Number

Cog Type (Continued) Size

Length

Set Part Number

Single Belt Number

Size

Length

Set Part Number

Single Belt Number

12.7 mm (1⁄2 in)

1702 mm (67.0 in)

9L-1129 (2)

9L-1130

17.5 mm (11⁄16 in)

1486 mm (58.5 in)

9N-1325 (3)

4N-8220

9L-2527 (3)

9L-1130

1499 mm (59.0 in)

9L-6642 (2)

9L-6641

1727 mm (68.0 in)

1S-1187 (2)

3S-9652

1524 mm (60.0 in)

4P-1667 (2)

4P-1666

3S-9653 (3)

3S-9652

1549 mm (61.0 in)

9L-6644 (2)

9L-6643

1740 mm (68.5 in)

4W-8655 (2)

4W-8654

6N-6798 (3)

9L-6643

1753 mm (69.0 in)

4W-8662 (2)

5S-5052

1549 mm (61.0 in)

6N-9159 (4)

9L-6643

9L-2526 (3)

5S-5052

1562 mm (61.5 in)

1778 mm (70.0 in)

2S-2481 (2)

1791 mm (70.5 in)

2P-5618 (2)

2P-5617

4N-6999 (3) 1S-1208 (2)

9L-5280 (3)

1803 mm (71.0 in) 1816 mm (71.5 in) 1829 mm (72.0 in) 1842 mm (72.5 in)

4N-2531 4N-2531

1588 mm (62.5 in)

9L-6646 (2)

9L-6645

1613 mm (63.5 in)

8N-0539 (2)

6N-6657

2P-5617

6N-6656 (3)

6N-6657

6F-2590

6N-6653 (4)

6N-6657

9L-6724 (2)

4N-8218

7E-6158

1639 mm (64.5 in)

6L-6557 (2)

9L-2519

4N-6423 (3)

4N-8218

9L-2520 (3)

9L-2519

6N-0388 (4)

4N-8218

1S-4760 (2)

1S-4761

1664 mm (65.5 in)

4P-8397 (2)

4P-8398

5N-2088 (3)

1S-4761

1689 mm (66.5 in)

9L-6648 (2)

9L-6647

1854 mm (73.0 in)

9L-6080 (3)

8N-2814

6N-6652 (3)

9L-6647

1880 mm (74.0 in)

9L-1630 (3)

9L-1629

9L-6650 (2)

9L-6649

7L-5093 (4) 1905 mm (75.0 in) 1918 mm (75.5 in)

6N-3843 (2)

1943 mm (76.5 in)

9L-2350 (3)

1956 mm (77.0 in)

17.5 mm (11⁄16 in)

4N-2532 (2) 5N-0414 (3)

1740 mm (68.5 in)

6N-9158 (3)

9L-6649

5M-0923

9L-1629 1752 mm (69.0 in)

7E-7646 (3)

7E-7645

1N-4555

1778 mm (70.0 in)

3R-9346 (2)

6N-6654

6N-6655 (3)

6N-6654

3N-8848 (3)

4N-8221

9L-2349 8M-3092

1803 mm (71.0 in) 1816 mm (71.5 in)

136-3646 (2)

8M-3092

1968 mm (77.5 in)

9L-4266 (3)

9L-4265

1981 mm (78.0 in)

7C-7204 (2)

8M-0760

2007 mm (79.0 in)

7E-6192 (2)

9L-6652 (2)

9L-6651

5N-2346 (4)

9L-6651

1829 mm (72.0 in)

5N-4751 (3)

6N-0073

1854 mm (73.0 in)

9L-6725 (2)

4N-8277

2187 mm (86.1 in)

117-0036

4N-8278 (3)

4N-8277

889 mm (35.0 in)

1L-6557

7W-3222 (4)

4N-8277

1080 mm (42.5 in)

6B-5653

1892 mm (74.5 in)

6N-6651 (3)

6N-6650

1156 mm (45.5 in)

8P-3064

1905 mm (75.0 in)

3R-9090 (4)

3R-9089

1232 mm (48.5 in)

6B-2746

1918 mm (75.5 in)

6N-9144 (2)

4N-8219

4N-6302 (3)

4N-8219

4P-8087 (3)

4P-8088

1245 mm (49.0 in)

9L-6654 (2)

9L-6653

1295 mm (51.0 in)

9L-0361 (2)

5B-8473

1956 mm (77.0 in)

6N-0341

1981 mm (78.0 in)

1308 mm (51.5 in) 1359 mm (53.5 in)

7N-3949 (2)

7N-3948

6N-7054 6N-7054 4W-6256

2N-8612 (3)

7N-3948

2007 mm (79.0 in)

4W-9051 (4)

1372 mm (54.0 in)

8L-5137 (3)

8L-5136

2032 mm (80.0 in)

7C-2500 (3)

7W-6129

1410 mm (55.5 in)

7L-7020 (3)

4L-4648

4W-8510 (4)

7W-6129

1422 mm (56.0 in)

4N-8217 (2)

4N-8216

1448 mm (57.0 in)

9L-6640 (2)

9L-6639

9N-1324 (3) 1460 mm (57.5 in) 1486 mm (58.5 in)

4N-6373 (2)

2057 mm (81.0 in)

9L-6639

8N-5509 (2)

6N-5338

6N-5337 (3)

6N-5338

7W-8137 (6)

6N-5338

6N-7135

2083 mm (82.0 in)

7N-7055 (4)

7N-7056

4N-8220

2108 mm (83.0 in)

118-2018 (3)

7W-8132

Number in parentheses ( ) after the set part number indicates the quantity of belts per set.

(Continued) 21-5

V-Belts

6N-7053 (3) 1W-0422 (4)

Cog Type (Continued) Size

Length

Set Part Number

Single Belt Number

Size

Length

17.5 mm (11⁄16 in)

2108 mm (83.0 in)

7W-8135 (6)

7W-8132

19.1 mm (3⁄4 in)

1372 mm (54.0 in)

2134 mm (84.0 in)

1W-3711 (2)

4N-8197

1397 mm (55.0 in)

7M-4691 (2)

5M-0924

4N-8198 (3)

4N-8197

1435 mm (56.5 in)

7M-0298 (2)

7M-2097

8N-6710 (4)

4N-8197

1448 mm (57.0 in)

8M-3646

2159 mm (85.0 in) 2184 mm (86.0 in) 2210 mm (87.0 in)

7N-8538

1473 mm (58.0 in)

4M-9678

7N-8538

1486 mm (58.5 in)

3R-2689

129-2416 (3)

1N-3464

1511 mm (59.5 in)

1N-3463 (2)

1N-3464

1524 mm (60.0 in)

8S-3199 (2)

7N-4829 (2)

7N-4828

1562 mm (61.5 in)

7M-6104 (2)

3P-0025

8N-6696 (4)

7N-4828

1575 mm (62.0 in)

7S-9807 (2)

4M-6292

7M-3921

7N-4828

1588 mm (62.5 in)

2P-6142 (2)

2P-6141

7N-2143

1600 mm (63.0 in)

7M-6105 (2)

8H-9832

2261 mm (89.0 in)

7N-9417 (2)

8N-6693

1613 mm (63.5 in)

1P-2423 (2)

1P-2421

8N-6708 (4)

8N-6693

1626 mm (64.0 in)

7M-6100 (2)

2M-8502

8N-6699 (6)

8N-6693

1638 mm (64.5 in)

4S-7754 (2)

4S-7757

2286 mm (90.0 in)

7W-5228 (6)

1W-8044

1651 mm (65.0 in)

7S-9811 (2)

5M-2733

2337 mm (92.0 in)

1N-3713 (6)

1N-3714

1676 mm (66.0 in)

7S-9860 (2)

7S-9859

1689 mm (66.5 in)

8M-1714 (2)

8M-1715

3N-8258 (3)

8M-1715

2464 mm (97.0 in)

8N-6718 (4)

8N-6717

8N-6700 (6)

8N-6717

5L-7426 (4)

5L-7425

1702 mm (67.0 in)

1S-1126 (2)

2L-2991

7L-7882 (6)

5L-7425

1727 mm (68.0 in)

5S-9078 (2)

5S-9505

8N-6707 (4)

8N-6709

1753 mm (69.0 in)

5S-9079 (2)

5S-9506

8N-6705 (6)

8N-6709

1765 mm (69.5 in)

7S-1690 (2)

7S-1691

8N-6713 (4)

8N-6719

1778 mm (70.0 in)

7S-9810 (2)

7S-9809

8N-6711 (6)

8N-6719

1791 mm (70.5 in)

5M-5343 (2)

5M-6096

2489 mm (98.0 in)

7N-3122 (5)

7N-3121

1803 mm (71.0 in)

7M-5535 (2)

4M-9386

2515 mm (99.0 in)

4W-0752 (3)

2W-5092

4N-4105 (4)

4M-9386

7W-5229 (6)

2W-5092

1842 mm (72.5 in)

9M-6933 (2)

9M-6934

2591 mm (102.0 in)

7N-3118 (5)

7N-3117

1854 mm (73.0 in)

2P-6140 (2)

2P-6139

2616 mm (103.0 in)

1N-4480 (4)

1N-4092

1880 mm (74.0 in)

2P-2357 (2)

2P-2356

1N-4097 (6)

1N-4092

1892 mm (74.5 in)

6N-2348 (2)

6N-2349

2667 mm (105.0 in)

8N-6716 (6)

8N-6698

1930 mm (76.0 in)

7S-8350 (2)

7S-8349

2692 mm (106.0 in)

8N-6720 (6)

1N-4090

1943 mm (76.5 in)

8S-6178 (2)

9M-5146

2718 mm (107.0 in)

V-Belts

7N-6602 (2) 7N-4148 (4)

8N-6702 (6)

2438 mm (96.0 in)

7N-3120 (5)

7N-3119

1956 mm (77.0 in)

1N-4095 (6)

7N-3119

2007 mm (79.0 in)

5R-2455 (3)

4M-9072

2794 mm (110.0 in)

8N-6694 (6)

1N-4093

2019 mm (79.5 in)

4N-4773 (4)

4N-4789

2819 mm (111.0 in)

1N-4098 (6)

1N-4089

2032 mm (80.0 in)

5S-0291 (3)

1054 mm (41.5 in)

5M-5344

2057 mm (81.0 in)

2S-8268 (3)

2S-9911

1143 mm (45.0 in)

5L-1584

2083 mm (82.0 in)

4N-1745 (3)

7M-7373

1156 mm (45.5 in)

9S-9010

2108 mm (83.0 in)

3S-9646 (3)

2S-5279

9M-3633

1181 mm (46.5 in)

1S-5138

2184 mm (86.0 in)

7N-7502 (2)

5S-1762

1206 mm (47.5 in)

5M-5345

2633 mm (103.7 in)

115-2460 (4)

115-2459

1232 mm (48.5 in)

3L-9717

2692 mm (106.0 in)

127-5563 (4)

127-5564

1257 mm (49.5 in)

5L-4660 (2)

8F-2434

2769 mm (109.0 in)

169-0147 (4)

169-0146

1334 mm (52.5 in)

7M-0169

1892 mm (74.5 in)

221-7007 (2)

221-7006

22.2 mm ( ⁄8 in)

Number in parentheses ( ) after the set part number indicates the quantity of belts per set.

21-6

3S-8402

1W-0530 (2)

2413 mm (95.0 in)

(Continued)

Single Belt Number

2235 mm (88.0 in)

2388 mm (94.0 in)

19.1 mm (3⁄4 in)

Set Part Number

7

Cog Type (Continued) Size

Length

Set Part Number

Single Belt Number

Size

Length

Set Part Number

Single Belt Number

22.2 mm (7⁄8 in)

2311 mm (91.0 in)

124-5113 (2)

110-0375

23.9 mm (15⁄16 in)

1943 mm (76.5 in)

7M-4703 (2)

2M-7863

23.9 mm ( ⁄16 in) 15

2388 mm (94.0 in)

123-3995 (2)

110-0376

7M-4704 (3)

2M-7863

2540 mm (100.0 in)

7M-4720 (2)

6B-9737

1956 mm (77.0 in)

7M-4718 (2)

1H-6929

2718 mm (107.0 in)

102-9928 (6)

4W-5092

1968 mm (77.5 in)

5L-5014 (2)

3L-7539

180-4526 (4)

4W-5092

2S-6168 (3)

3L-7539

2769 mm (109.0 in)

123-5889 (4)

123-5890

1994 mm (78.5 in)

7M-4721 (2)

8B-3546

133-6445 (4)

133-6444

2007 mm (79.0 in)

8M-0934 (2)

8M-0959

2895 mm (114.0 in)

119-6374 (6)

119-6373

2032 mm (80.0 in)

9M-7801 (2)

9M-7800

2S-5653 (3)

9M-7800

2057 mm (81.0 in)

8M-8681 (2)

3L-6052 3L-6052

1232 mm (48.5 in)

5F-7676

1270 mm (50.0 in)

5H-2896

1308 mm (51.5 in)

5H-9857

3S-7520 (3)

1372 mm (54.0 in)

7E-5097 (2)

7E-5096

6N-1551 (4)

3L-6052

1397 mm (55.0 in)

7E-5113 (2)

7E-5114

2108 mm (83.0 in)

4S-9791 (3)

4S-7796

1410 mm (55.5 in)

7M-4711 (2)

9F-1899

2159 mm (85.0 in)

7M-4710 (2)

5H-7371

1422 mm (56.0 in)

1S-1127 (2)

1L-5514

2159 mm (85.0 in)

2P-8624 (3)

5H-7371

1448 mm (57.0 in)

4N-6529 (2)

5L-9902

2184 mm (86.0 in)

7C-3559 (2)

7C-3560

1486 mm (58.5 in)

7M-4715 (2)

8F-5164

2210 mm (87.0 in)

2W-8951 (2)

1M-7303

1499 mm (59.0 in)

8M-9708

7M-4701 (3)

1M-7303

1511 mm (59.5 in)

4M-8218

2235 mm (88.0 in)

2W-6766 (2)

2W-6765

2261 mm (89.0 in)

2W-8952 (2)

2S-5279

7N-3965 (4)

7N-3966

2286 mm (90.0 in)

1S-1207 (2)

5B-9790

6N-7575 (4)

5B-9790

6B-8536

2337 mm (92.0 in)

4W-7508 (2)

4W-7507

1549 mm (61.0 in)

2P-2369 (2)

3S-2347

1575 mm (62.0 in)

8N-4128 (2)

5M-5347

1588 mm (62.5 in)

2P-2696 (2)

5M-5965

1600 mm (63.0 in)

7M-4716 (2)

1613 mm (63.5 in)

4F-6390

1626 mm (64.0 in)

2P-1388 (2)

2P-1272

2540 mm (100.0 in)

7W-6471 (6)

6B-9737

1651 mm (65.0 in)

7M-0981 (2)

1L-5681

2591 mm (102.0 in)

7W-1665 (4)

7W-1664

1676 mm (66.0 in)

4N-3587 (2)

7M-7477

2718 mm (107.0 in)

4W-5091 (5)

4W-5092

7M-7476 (3)

7M-7477

2869 mm (113.0 in)

9Y-8467 (6)

9Y-8466

1689 mm (66.5 in)

7L-7099 (2)

3L-7540

1156 mm (45.5 in)

6B-1039

1702 mm (67.0 in)

7M-7864 (3)

2H-1383

1245 mm (49.0 in)

7B-4032

1714 mm (67.5 in)

5L-5015 (2)

2M-8183

1270 mm (50.0 in)

4F-7956

1753 mm (69.0 in)

9M-7221 (2)

9M-7220

2S-6913 (3)

9M-7220

26.9 mm (1 ⁄16 in) 1

28.6 mm (1 1⁄8 in)

1334 mm (52.5 in)

5H-4239

1054 mm (41.5 in)

100-3725

1765 mm (69.5 in)

3P-0071 (2)

5H-4207

1093 mm (43.0 in)

7E-4841

1778 mm (70.0 in)

7M-4706 (2)

4M-5429

31.8 mm (1 1⁄4 in)

1537 mm (60.5 in)

7B-2774

1803 mm (71.0 in)

7M-4707 (2)

4M-5413

31.8 mm (1 1⁄4 in)

1562 mm (61.5 in)

1803 mm (71.0 in)

5L-5656 (3)

4M-5413

1588 mm (62.5 in)

1816 mm (71.5 in)

7M-4719 (2)

7B-0344

1651 mm (65.0 in)

6L-6552 (2)

1H-3592

1842 mm (72.5 in)

7M-4705 (2)

5H-1678

1753 mm (69.0 in)

7M-4948 (2)

1H-5899

1854 mm (73.0 in)

7M-4702 (2)

5H-7448

1880 mm (74.0 in)

7M-4953 (2)

5H-4462

1867 mm (73.5 in)

3P-0098 (2)

3P-0099

1880 mm (74.0 in)

7M-0185 (2)

1930 mm (76.0 in)

8S-1475 (2)

2M-8255

7M-4947 (3)

2M-8255

7M-4717 (2)

7H-9806

1506 mm (59.3 in)

3B-8904

114-6414

Number in parentheses ( ) after the set part number indicates the quantity of belts per set.

21-7

V-Belts

1918 mm (75.5 in)

34.9 mm (1 ⁄8 in) 3

8H-7180 5L-6672 (2)

Serpentine Type

V-Belts

Size Section

21-8

Length 917 mm (36.1 in) 1054 mm (41.5 in) 1093 mm (43.0 in) 1170 mm (46.1 in) 1230 mm (48.4 in) 1860 mm (73.2 in) 2180 mm (85.8 in) 2210 mm (87.0 in) 2246 mm (88.4 in) 2376 mm (93.5 in) 2475 mm (97.4 in) 2481 mm (97.7 in) 2555 mm (100.6 in) 2658 mm (104.6 in) 2820 mm (111.0 in) 2840 mm (111.8 in) 2860 mm (112.6 in)

Single Part Number 218-9823 100-3725 141-7116 186-4195 236-3842 219-3303 183-4494 211-5022 190-4155 189-2218 253-4012 219-3304 219-8689 239-5944 260-6106 226-9381 174-9690