Conoco Phillips - Engineering Numbering Systems (COPENS) - Document No. 2169 Rev9

Page no.

Title

ConocoPhillips Engineering Numbering System (COPENS)

1

Total

236

ConocoPhillips Engineering Numbering System (COPENS) Document no.: 2169 Process correspondence: Anskaffelse, Boring/WS, HMS - risikostyring, Prosjekt, Vedlikehold NORSOK Standard Reference: Z-DP-002, rev. 3

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

2

Total

236

SECTION - 1 INTRODUCTION ________________________________________ 5 1.1 Purpose

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

1.2 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3 User groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.4 Handling of non-conformances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.5 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.6 Normative References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.6.1 NORSOK Standards: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.6.2 COPENS References:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.6.3 Other References: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

SECTION - 2 FACILITY/AREA CODE ___________________________________ 8 2.1 Facility Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.2 Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.2.1 Area Type Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.2.2 Room numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.2.3 Sub-Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

SECTION - 3 DISCIPLINE CODES ____________________________________ 50 SECTION - 4 SYSTEM NUMBER _____________________________________ 52 4.1 System Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 4.2 System Number Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 4.3 System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 4.4 System Boundaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 SECTION - 5 TECHNICAL OBJECT NUMBERING/TAG NUMBERING _______ 77 5.1 Extent of Tagging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 5.2 SAP Asset Register / Functional Location Hierarchy / Structure . . . . . . 78 5.2.1 SAP Asset Register / Functional Location Structure . . . . . . . . . . . . . . . . . . . . . . . 79

5.3 When to keep a Unit & Tag Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 5.4 Superior Functional Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 5.4.1 General Unit Numbers / “stand alone” Tagged Items . . . . . . . . . . . . . . . . . . . . . . . 85 5.4.2 General Unit Numbers for Telecommunication & Computer Systems (860, 870 & 880) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

5.5 Tag Number Structure in SAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Document / Revision No. /

Owner

Approved

Page no.

Title

3

Total

236

5.5.1 Tag Sequence Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 5.5.2 Tag Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 5.5.3 Other General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 5.5.4 Future tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

5.6 Category Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 5.6.1 Valid Category Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

5.7 Secondary Alpha Prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 5.8 Equipment Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 5.8.1 Equipment Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 5.8.2 Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

5.9 Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 5.9.1 Functional Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 5.9.2 Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 5.9.3 Material Master . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 5.9.4 Linking Plant & Equipment Documentation to the Functional Location Hierarchy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

5.10 Category Descriptions and Tag Number Requirements . . . . . . . . . . . . 103 5.11 Secondary Alpha Prefix - Valid Codes . . . . . . . . . . . . . . . . . . . . . . . . . . 144 5.11.1 Alpha Prefix Legend - Category 01 HVAC & Refrigeration Equipment . . . . . . 144 5.11.2 Alpha Prefix Legend - Category 05 Fans (blowers) . . . . . . . . . . . . . . . . . . . . . . 145 5.11.3 Alpha Prefix Legend - Category 13 Computer Equipment . . . . . . . . . . . . . . . . 145 5.11.4 Alpha Prefix Legend - Category 26 Cables (incl. Umbilicals) . . . . . . . . . . . . . . 145 5.11.5 Alpha Prefix Legend - Category 28 & 43 Panels (Electrical & Instrument) . . . 145 5.11.6 Alpha Prefix Legend - Junction Boxes - Category 13, 28, 43 & 80 - Electrical/Instrument/Telecomm/F & G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 5.11.7 Alpha Prefix Legend - Category 43 Fire & Gas Equipment . . . . . . . . . . . . . . . . 146 5.11.8 Alpha Prefix Legend - Category 43 Instrument Valves . . . . . . . . . . . . . . . . . . . . 147 5.11.9 Alpha Prefix Legend - Category 43 Instruments . . . . . . . . . . . . . . . . . . . . . . . . 148 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 5.11.11 Alpha Prefix Legend - Category 60, Pipeline Systems (pig launchers/receivers, pipelines, risers & J-Tube) . . . . . . . . . . . . . . . . . . . 162 5.11.12 Alpha Prefix Legend - Category 60 Pipe Support / Penetration . . . . . . . . . . . 162 5.11.13 Alpha Prefix Legend - Category 13 & 80 Communication (telecom) Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 5.11.14 Alpha Prefix Legend - Category 91 Automatic/Actuator Operated Valves . . 165 5.11.15 Alpha Prefix Legend - Category 93 Safety Relief Valves . . . . . . . . . . . . . . . . . 166 5.11.16 ISA Format Table (Alpha Prefixes). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167

5.12 Example of Tag Syntax for Typical Equipment Categories . . . . . . . . . 168 5.13 Piping Line Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

Document / Revision No. /

Owner

Approved

Page no.

Title

4

Total

236

5.13.1 Line Numbering Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 5.13.2 Line Sequence Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 5.13.3 Pipe Class Sheet (Specification). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 5.13.4 Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 5.13.5 Product Service Codes EKOll & new installations (valid for EKOX, EKOJ, ELDE & New installations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 5.13.6 Insulation Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 5.13.7 Optional Sub-Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 5.13.8 Pipe Line Numbering - for New Lines on EKOI Installations, Excluding EKOX, EKOJ, ELDE & New Installations . . . . . . . . . . . . . . . . . . . . 179 5.13.9 Product Service Codes for EKOI Installations (not valid for EKOX, EKOJ, ELDE and new installations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

5.14 Specification for Tag Nameplates & Labels . . . . . . . . . . . . . . . . . . . . . . 183 5.14.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 5.14.2 Design, Fabrication and Installation of Tag Nameplates . . . . . . . . . . . . . . . . . . 184 5.14.3 Tag Descriptions on Tag Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 5.14.4 Examples of Standard/Overall Tag Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . 187 5.14.5 Labeling of Cable and Core Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 5.14.6 Labeling of HVAC Ductwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 5.14.7 Labeling of Piping with Color Coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

SECTION - 6 DOCUMENT/DRAWING NUMBER ________________________ 201 6.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 6.2 Document/Drawing Number Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 6.2.1 Standard Document/Drawing Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 6.2.2 Document/Drawing Number for Existing Facilities . . . . . . . . . . . . . . . . . . . . . . . . 205

6.3 Drawing Number Exceptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 6.3.1 Instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 6.3.2 Piping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 6.3.3 Supplier Documents and Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206

6.4 Document/Drawing Titles and Descriptions . . . . . . . . . . . . . . . . . . . . . . 207 6.5 Document/Drawing Sub-Type Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 6.5.1 Document Sub-Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 6.5.2 Drawing Sub-Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

SECTION - 7 ABBREVIATIONS - DOCUMENT/DRAWING & EQUIPMENT MODULE ____________________________________________ 219 7.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 7.1.1 Standard Abbreviation - Document/Drawing & Asset Register Module. . . . . . . 219

Document / Revision No. /

Owner

Approved

Page no.

Title

5

Introduction

1

Introduction

1.1

Purpose

Total

236

These additional technical requirements are developed by ConocoPhillips Norway (COPNO) and are intended to replace NORSOK Coding System, Z- DP-002. These technical requirements cover requirements additional to the NORSOK Standards listed under Normative References.

1.2

Scope ConocoPhillips Engineering Numbering System (COPENS) shall be used for the coding of equipment and documents for new development projects, modification projects as well as maintenance related work.

1.3

User groups User groups for this procedure are all personnel engaged in the allocation of equipment and document numbers associated with any ConocoPhillips new building project, modification project or maintenance work.

1.4

Handling of non-conformances This standard includes requirements that cannot be deviated from, unless an authorized dispensation is obtained. Should there be any questions or uncertainties arising from these requirements the Manager Maintenance shall be contacted. The Manager Maintenance shall approve any eventual dispensation from this standard, accordance with document 4920 Avviksbehandling.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

6

Introduction

1.5

Total

236

Definitions Alpha Prefix codes

Describes the technical objects function or type within the category code

BD

Company identifier in SAP (BD= COPNO)

Bill of Material (BOM)

Components list for an object (Equipment BOM)

Construction Type

Link to Material Master number in SAP

COPNO

ConocoPhillips Norway

Design Documents

Document category = D in SAP

DFO

Documentation for Operations

Equipment Category

Identification of an object type (numeric two digits)

Equipment Number

A number that uniquely identifies the item and remains with the object regardless of it's location (non-intelligent number).

ESD

Emergency Shut Down (system)

Facility

Name of plant/platform

Functional Location

Functional address of an object (physical location = location)

F&G

Fire & Gas (system)

Material Master Number

Unique identification of a component type

PCDA

Process Control & Data Acquistion (system)

PM program

Preventive Maintenance program

PSD

Process Shut Down (system)

Sequence Number

A five (5) digit non-intelligent number (except for instruments)

Superior Functional Location

General level above a functional location

Supplier Documents

Vendor Documents = Manufacturer Documents. Document category = V in SAP

System number

Identifies a process/support or utility system

TAG Nameplate

The physical label/plate, adjacent to the item, which identifies the object's tag number and it’s description of it's function/service

TAG number

A technical object's functional location address within a system/facility

Technical Object

A general term used to describe all equipment, packages and components, which will be registered in the COPNO Asset Register

Unit number

Level above tag number

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

7

Introduction

1.6

Total

236

Normative References

1.6.1 NORSOK Standards: Z-001, Documentation for Operations (DFO) Z-DP-002, Coding System Z-003, Technical Information Flow Requirements Z-004, CAD Symbol Libraries Z-005, 2D CAD Drawing Standard Z-008, Criticality Analysis for maintenance purposes Z-015, Temporary Equipment

1.6.2 COPENS References: 2805 Utstyr som settes permanent ut av drift 4314 Documentation for Operations (DFO) 4583 Piping Design Requirements for New Installations and Modifications to Existing Facilities 4920 Avviksbehandling 4946 Endringer i utstyrsregisteret 4963 Vedlikeholdsstyring 4971 Registration and Modification of Plant and Equipment Documents 5047 Criticality analysis for maintenance purposes 5060 Piping & Valve Specification - Greater Ekofisk Field 5077 Specification for Piping Colour Coding and Marking 6232 Equipment for Temporary use offshore

1.6.3 Other References: NS 5575 Ventilation duct - identification colors

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

8

Facility/Area Code

2

Facility/Area Code

2.1

Facility Code

Total

236

Facility represents the common term for all installations (e.g. platforms, rigs, vessels, etc.) directly operated by ConocoPhillips. Facility Code is composed of max. four (4) alphanumeric characters (Note that facility Tor & H-7, is described in SAP Asset register with 3 characters + one blank character). A Facility includes associated structures like bridges, tripods, flares, pipelines, risers. For example; EKOJ is bridged to EKOX, the bridge is there for the purpose of connecting EKOJ, and therefore the bridge is associated as an area to EKOJ. NOTE:

Any bridges, tripods, flares, pipelines, risers, etc. connected to a platform will be covered under one Facility Code, and further identified through the Area Code, (section 2.2 Area Codes on page 9).

The Facility Code and the Area Code shall be registered in the company's equipment register and document control system as attributes for identifying to which Facility and Area a documents/equipment is applicable. However these attributes will not form part of the actual Document/Drawing Number. Below are listed the ConocoPhillips Facility Codes: CODE

FACILITY

GENERAL BD01

Multiple Facilities and Equipment Information

LAND SITE ONSH

Onshore Facilities

PRODUCTION & TRANSPORTATION FACILITIES B-11

GAS BOOSTER – EMDEN PIPELINE

EKOA

EKOFISK 2/4 ALPHA

EKOB

EKOFISK 2/4 BRAVO

EKOC

EKOFISK 2/4 CHARLIE

EKOD

EKOFISK WEST 2/4 DELTA

EKOF

EKOFISK 2/4 FTP

EKOH

EKOFISK 2/4 HOTEL

EKOJ

EKOFISK 2/4 JULIETT

EKOK

EKOFISK 2/4 KILO

EKOL

EKOFISK 2/4 LIMA (Future Living Quarters)

EKOM

EKOFISK 2/4 MIKE

EKOQ

EKOFISK 2/4 QUARTERS

EKOW

EKOFISK 2/4 WHISKEY

EKOX

EKOFISK 2/4 XRAY

ELDA

ELDFISK 2/7 ALPHA

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

9

Facility/Area Code

Total

236

PRODUCTION & TRANSPORTATION FACILITIES

2.2

ELDB

ELDFISK 2/7 BRAVO

ELDE

ELDFISK 2/7 ECHO

ELDF

ELDFISK 2/7 FTP

EMBL

ELDFISK 2/7 DELTA (EMBLA)

H-7

GAS BOOSTER – EMDEN PIPELINE

TOR

TOR 2/4 ECHO

Area Codes "Area" as used in COPENS identifies a specific area, module or structure on or connected to a platform. An Area has defined boundaries and it normally performs a function. Area Code is composed of three (3) alphanumeric characters. The leading alpha character is standard and shall not be deviated from, however, the two numeric characters shall be developed by the design contractor and approved by the project. The Facility Code and the Area Code shall be registered in the company's document system and equipment register as attributes for associating a Facility and Area with specific equipment/ documents. These codes will not form part of the actual Document/ Drawing Number. (see Section 6 Document/Drawing Number on page 201). Typical examples of Area Code (also showing the applicable Facility Code): a)

EKOK A00

=

Platform General on EKOK

b)

EKOX B01

=

Bridge EKOX to EKOC

c)

EKOA L02

=

Pipeline EKOA - EKOM, 17" Oil/Gas

d)

EKOM R04

=

17” Oil Import Riser, from EKOA

NOTE:

An Area Code will only be unique when appearing together with the applicable Facility Code.

Example:

Sub-Area Code B01 (Bridge no. 1) is used for several platforms. Only in the combination EKOJ B01 will it mean a specific bridge; Bridge from EKOJ to EKOX.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

10

Facility/Area Code

Total

236

2.2.1 Area Type Codes Below are listed the standard COPENS Area Type Codes: Note: That area type codes can vary on old platforms). CODE

AREA TYPE

DESCRIPTION

A

Platform General

(overall, non-area related)

B

Bridge

(between platforms or to tripod)

C

Cellar Deck

D

Drilling

(module/rig)

F

Flare

(flare on platform or outlying flare, excl. tripod)

G

GBS

(gravity based structures)

H

Helideck

(incl. support structure and access routes from living quarters)

J

Platform Jacket

(incl. conductor support frame)

K

Deck Crane

(main platform cranes)

L

Pipeline

(incl. expansion loop up to flange/weld to riser bend)

M

Module

Not in use

P

Process

(module)

Q

Living Quarters

(accommodation)

R

Riser

(def.: part of pipeline system which extend from first flange/ weld or ESD valve above platform deck to first flange/weld after bottom riser bend). Also includes J-tubes for umbilicals and cables.

S

Hull

T

Tripod

(support-jackets under bridges and flares)

U

Utility

(module)

W

Wellhead

(area below drilling area - incl. subsea wellhead)

Z

Space between modules

Only to be used during project phase

2.2.2 Room numbering Room numbering will function as a sub/sub-area and shall have the following structure. The room number will consist of an additional 2 digits following the sub-area code; for ex. EKOM U10-32 Generator Room. Area code plus room number will be used in SAP equipment module when registering functional location. However, only the area code will be used when cross referencing documents/drawings.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

11

Facility/Area Code

Total

236

2.2.3 Sub-Area Codes Facility

Area

Area Description

B11

A00

PLATFORM GENERAL

H01

HELIDECK & SUPPORT

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

L01

36” GAS PIPELINE, B-11 TO H-7

P01

CONTROL ROOM LEVEL-CONTROL BUILDING

P02

PIG RECEIVER/LAUNCHER AREA - CELLAR DECK NORTH

P03

INLET GAS SCRUBBER AREA - CELLAR DECK MIDDLE

P04

RECYCLE COOLER AREA - UTILITY DECK NORTH/EAST

Q01

QUARTERS 1ST FLOOR

Q02

QUARTERS 2ND FLOOR

Q03

QUARTERS 3RD FLOOR

R01

36" GAS EXPORT RISER TO H-7

R02

36" GAS IMPORT RISER FROM EKOJ

U01

SEA WATER PUMPS AREA - CELLAR DECK NORTH

U02

FRESH WATER COOLERS - CELLAR DECK SOUTH/EAST

U03

FIREWATER PUMPS AREA - CELLAR DECK SOUTH

U04

MECH.EQUIPMENT ROOM - CELLAR DECK SOUTH

U05

CELLAR DECK SOUTH/WEST INCL. LANDING AREA

U06

UTILITY DECK NORTH OF FIREWALL

U07

TRANSFORMER AREA - UTILITY DECK SOUTH

U08

AIR COMPRESSOR ROOM - UTILITY DECK SOUTH

U09

SWITCHGEAR ROOM - UTILITY DECK SOUTH

U10

GENERATOR ROOM - UTILITY DECK SOUTH

U11

KGB TURBINE AIR INTAKE - UTILITY DECK SOUTH

U12

P/L COMPRESSOR ROOM - EQUIP. DECK NORTH

U13

WORKSHOP/STORES AREA - EQUIP. DECK SOUTH

U14

ROOF DECK LAYDOWN AREA

U15

HELIDECK UTILITY AREA

U16

DIESEL STORAGE TANK - CELLAR DECK SOUTH/WEST

U17

DIESEL STORAGE & SLOP OIL TANKS - CELLAR DECK NORTHWEST

U18

DIESEL STORAGE TANKS - CELLAR DECK MIDDLE

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

12

Facility/Area Code

Total

236

Facility

Area

Area Description

B11

U19

POTABLE & FRESHWATER STORAGE TANKS - CELLAR DECK NORTH

U20

POTABLE & FRESHWATER STORAGE TANKS - CELLAR DECK SOUTH

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

13

Facility/Area Code

Facility

Area

Area Description

EKOA

A00

PLATFORM GENERAL

A01

STORAGE AREA/LAYDOWN DECKS

D01

DERRICK

D02

DRILL FLOOR

D03

BOP DECK

D04

SKID DECK

D05

SCHLUMBERGER UNIT

D06

CEMENT & ACIDIZING AREA

D07

PIPE RACK AREA

D08

BULK STORAGE AREA

D09

MUD MIXING AREA

D10

MUD TANKS & MUD PUMP AREA

D11

WELLHEAD AREA

D12

WELLHEAD AREA

D13

BURNER ROOM

H01

HELIDECK & SUPPORT

J01

ALL JACKET (EXCEPT FOR RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

L01

10" PIPELINE (Used for umbilical), FROM EKOF

L02

NOT IN USE (20" OIL/GAS PIPELINE, EKOA TO EKOF)

L03

NOT IN USE (6" GAS LIFT FROM EKOF TO EKOA)

L04

17" OIL/GAS PIPELINE EKOA TO EKOF

Q01

QUARTERS 1ST FLOOR

Q02

QUARTERS 2ND FLOOR

Q03

QUARTERS 3RD FLOOR

Q04

QUARTERS 4TH FLOOR

Q05

QUARTERS 5TH FLOOR

Q06

QUARTERS 6TH FLOOR

Q07

QUARTERS ROOF

R01

10" RISER(Used for umbilical), FROM EKOF

R02

NOT IN USE (20" OIL/GAS RISER, EKOA TO EKOF)

R03

6” GAS LIFT RISER FROM EKOF

R04

17" OIL/GAS RISER EKOA TO EKOF

U01

UTILITIES MODULE NORTH/EAST

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

14

Facility/Area Code

Facility

Area

Area Description

EKOA

U02

UTILITIES MODULE NORTH/WEST

U03

DIESEL STORAGE DECK TANK

U04

POTABLE WATER STORAGE DECK TANK

U05

POTABLE WATER STORAGE DECK TANK

U06

FRESH WATER STORAGE DECK TANK

U07

EMERGENCY GENERATOR ROOM

U08

MAIN GENERATOR ROOM

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

15

Facility/Area Code

Facility

Area

Area Description

EKOB

A00

PLATFORM GENERAL

A01

STORAGE AREA / LAYDOWN DECKS

A02

OFFICE / COFFEE ROOM

D01

DERRICK

D02

DRILL FLOOR

D03

BOP DECK

D04

SKID DECK

D05

SCHLUMBERGER UNIT

D06

CEMENT & ACIDIZING AREA

D07

PIPE RACK AREA

D08

BULK STORAGE AREA

D09

MUD TANKS & MUD PUMP AREA

D10

WELLHEAD AREA

D11

WELLHEAD HYDR. ROOM

D12

BURNER BOOM

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

L01

10" OIL/GAS EKOB TO EKOF

L02

18" OIL/GAS EKOB TO EKOF

L03

22" OIL/GAS EKOB TO EKOF

L05

20" OIL/GAS PIPELINE TO EKOM

P01

CONTROL ROOM

P02

LAUNCHER AREA

P03

WATER SEPARATOR PACKAGE

P04

PUMPS

P05

TEST SEPARATOR

P06

DEGASSING POT

R01

10" FUEL GAS RISER EKOB TO EKOF

R02

18" OIL/GAS RISER EKOB TO EKOF

R03

22" OIL/GAS RISER EKOB TO EKOF

R04

8" GAS LIFT RISER FROM EKOC

R05

20" OIL/GAS RISER TO EKOM

U01

FRESH WATER TANK

U02

DIESEL STORAGE TANK

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

16

Facility/Area Code

Facility

Area

Area Description

EKOB

U03

RAW FRESH WATER TANK

U04

POTABLE WATER TANK

U05

WORKSHOP

U06

WAREHOUSE

U07

AIR RECEIVER AREA

U08

STORAGE AREA

U09

GENERATOR PACKAGE

U10

EMERGENCY GEN. ROOM

U11

FIREWATER PUMPS

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

17

Facility/Area Code

Facility

Area

Area Description

EKOC

A00

PLATFORM GENERAL

A01

MAINTENANCE WAREHOUSE & OFFICES

A02

CELLAR DECK CENTER

A03

OFFICE AREA

B01

STORAGE BRIDGE1 EKOC TO BS III

B02

STORAGE BRIDGE2 BS III TO EKOP

B03

QUARTERS BRIDGE EKOC TO EKOQ

D01

DRILLING DERRICK

D02

DRILL FLOOR

D03

BOP DECK

D04

SKID DECK

D05

SCHLUMBERGER UNIT

D06

CEMENT MIX UNIT

D07

PIPE RACK AREA

D08

BULK STORAGE AREA

D09

MUD TANKS & MUD PUMP AREA

D10

ABOVE MUD TANKS AREA

D11

WELLHEAD AREA

D12

BURNER ROOM

D13

DRILLING GENERATOR ROOM

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

L01

8" GAS (COFLEXIP) EKOC TO EKOB

P01

CONTROL ROOM

P02

GAS SCRUBBER AREA

P03

GAS COOLER AREA

P04

FRESH WATER COOLER AREA

P05

COMPRESSOR TRAIN 1 - LEVEL B (EAST)

P06

COMPRESSOR TRAIN 2 - LEVEL B (WEST)

R01

8" GAS RISER EKOC TO EKOB

T01

BRIDGE SUPPORT III EKOC TO EKOP

U01

BELOW CELLAR DECK

U06

MOTOR CONTROL CENTER

U07

COMPRESSOR UTILITY TRAIN 1 – LEVEL C (EAST)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

18

Facility/Area Code

Facility

Area

Area Description

EKOC

U08

COMPRESSOR UTILITY TRAIN 2 – LEVEL C (WEST)

U09

TRAIN 1 TURBINE ROOM ROOF

U10

TRAIN 2 TURBINE ROOM ROOF

U11

LOCAL EQUIPMENT ROOM

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

19

Facility/Area Code

Facility

Area

Area Description

EKOF

A00

PLATFORM GENERAL

B01

FLARE BRIDGE 1 EKOF TO BS 1

B02

FLARE BRIDGE 2 BS 1 TO EKOW

B03

FLARE BRIDGE 3 EKOW TO FL 1

B04

PRODUCTION BRIDGE EKOF TO EKOQ

F01

FLARE I & STRUCTURE (SOUTH)

H01

HELIDECK & SUPPORT

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

L01

6” GAS LIFT, EKOF TO EKOA

L02

10” FUEL GAS EKOF TO EKOB

L03

10” PIPELINE (Used for umbilical), EKOF to EKOA

P01

2/4A RECEIVERS/LAUNCHER (SOUTH WEST 20M)

P02

2/4B RECEIVERS/LAUNCHER (EAST CENTER 20M)

P03

CRUDE OIL PUMPS/SKIMMER TANK (SOUTH-CENTER 20M)

P04

SETTLING TANKS

P05

CELLAR DECK NORTH END

P06

1ST STAGE SEPARATORS

P07

EXCHANGER SKID (LOWER)

P08

CONTAINER AREA (LOWER)

P09

OLD TURBINE AREA

P10

WORLEY SEPARATOR PKG.

P11

OLD TURBINE AREA

P12

V3011

P13

CONTAINER AREA (UPPER)

P14

2ND + 3RD STAGE SEPARATORS

P15

EXCHANGER SKID (TOP)

P16

COOLER PKG.

P17

TURBINE PKG. LAYDOWN DECK

P18

CONTROL ROOM

P19

SOUTH EAST 20M DECK

R01

10" RISER (FOR UMBILICAL) TO EKOA

R02

20” OIL/GAS RISER FROM EKOA

R03

NOT IN USE (10" OIL/GAS RISER FROM EKOB)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

20

Facility/Area Code

Facility

Area

Area Description

EKOF

R04

18" OIL/GAS RISER FROM EKOB

R05

22" OIL/GAS RISER FROM EKOB

R06

6" GAS LIFT RISER EKOF TO EKOA

T01

BRIDGE SUPPORT 1 EKOF TO EKOW

T02

FLARE 1 SUPPORT (SOUTH)

U01

LOWER WORKSHOP

U02

WELD SHOP

U03

TRANSFORMER DECK

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

21

Facility/Area Code

Facility

Area

Area Description

EKOH

A00

PLATFORM GENERAL

B01

HOTEL BRIDGE EKOH TO EKOC

H01

HELIDECK & SUPPORT

H02

HELICOPTER HANGAR

J01

ALL JACKET

K01

SOUTH CRANE & PEDESTAL

Q00

MAIN FLOOR

Q01

QUARTERS 1ST FLOOR

Q02

QUARTERS 2ND FLOOR

Q03

QUARTERS 3RD FLOOR

Q04

QUARTERS 4TH FLOOR

Q05

QUARTERS 5TH FLOOR

Q06

QUARTERS 6TH FLOOR

U00

UTILITIES MODULE - GENERAL

U01

CELLAR DECK

U02

MEZZANINE DECK

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

22

Facility/Area Code

Facility

Area

Area Description

EKOJ

A00

PLATFORM GENERAL

B01

BRIDGE EKOJ - EKOX

B02

FOR EQUIPMENT LOCATED ON EKOM - B02

C00

MODULE SUPPORT FRAME - GENERAL

C01

MSF UTILITY AREA – LEV. 1 & LEV. 1 MEZZ. (C11 & C21)

C02

MSF PROC. AREA – LEV. 1 & LEVEL 1 MEZZ. (C12 &C22)

C03

MSF RISER AREA – LEV. 1 & LEV. 1 MEZZ. (C13 & C23)

C10

MSF ALL AREAS - LEVEL 1

C11

MSF UTILITY AREA - LEVEL 1

C12

MSF PROCESS AREA - LEVEL 1

C13

MSF RISER AREA - LEVEL 1

C20

MSF ALL AREAS - LEVEL 1 MEZZ.

C21

MSF UTILITY AREA - LEVEL 1 MEZZ.

C22

MSF PROCESS AREA - LEVEL 1 MEZZ.

C23

MSF RISER AREA - LEVEL 1 MEZZ.

F01

FLARE BOOM

I00

INJECTION COOLER MODULE

J01

JACKET

K01

NORTH CRANE & PEDESTAL

K02

SOUTH CRANE & PEDESTAL

L00

PIPELINE GENERAL

L01

24" OIL PIPELINE FROM ELDB

L02

30" GAS PIPELINE FROM ELDB

L03

14" OIL/GAS PIPELINE FROM TOR

L04

34" OIL PIPELINE TO TEESSIDE

L05

36" GAS PIPELINE TO EMDEN

L06

20" OIL PIPELINE FROM VALHALL

L07

20" GAS FROM VALHALL (CANCELLED)

L08

20" OIL PIPELINE FROM ULA

L09

12" GAS PIPELINE FROM GYDA

L10

6" GAS/FUEL PIPELINE EKOJ TO EKOK

P00

PROCESS MODULE GENERAL

P10

PROC. MOD. - LEVEL 1

P11

PROC. MOD. - LEVEL 1 SOUTH

P12

PROC. MOD. - LEVEL 1 NORTH

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

23

Facility/Area Code

Facility

Area

Area Description

EKOJ

P15

PROC. MOD. - LEVEL 1 & LEV. 1 MEZZ. (P10&P20)

P20

PROC. MOD. - LEVEL 1 MEZZ.

P21

PROC. MOD. - LEVEL 1 MEZZ. SOUTH

P22

PROC. MOD. - LEVEL 1 MEZZ. NORTH

P30

PROC. MOD. - LEVEL 2

P31

PROC. MOD. - LEVEL 2 SOUTH

P32

PROC. MOD. - LEVEL 2 NORTH

P35

PROC. MOD. - LEVEL 2 & ABOVE (P10 & P20)

P40

PROC. MODULE - LEVEL 2 MEZZ.

P41

PROC. MOD. - LEVEL 2 MEZZ. SOUTH

P42

PROC. MOD. - LEVEL 2 MEZZ. NORTH

P50

PROC. MOD. - WEATHER DECK

P51

PROC. MOD. - WEATHER DECK SOUTH

P52

PROC. MOD. - WEATHER DECK NORTH

P61

PROC. MOD. - WEATHER DECK MEZZ. SOUTH

P62

PROC. MOD. - WEATHER DECK MEZZ. NORTH

P70

PROC. MOD. - UPPER WEATHER DECK

P71

PROC. MOD. - UPPER WEATHER DECK SOUTH

P72

PROC. MOD. - UPPER WEATHER DECK NORTH

R00

RISER MODULE

R01

24” OIL RISER FROM ELDF

R02

30” GAS RISER FROM ELDF

R03

14” OIL/GAS RISER FROM TOR

R04

34" OIL RISER, EKOJ TO TEESSIDE

R05

36" GAS RISER, EKOJ TO EMDEN

R06

20" OIL RISER FROM VALHALL

R07

20" GAS RISER FROM VALHALL (CANCELLED)

R08

20" OIL RISER FROM ULA

R09

12" GAS RISER FROM GYDA

R10

6" GAS FUEL RISER, EKOJ TO EKOK

R11

J – TUBE FIBRE OPTIC CABLE & EMDEN SSIV UMBILICAL

R12

J – TUBE FOR TEESSIDE SSIV UMBILICAL

P62

PROC. MOD. - WEATHER DECK MEZZ. SOUTH

P70

PROC. MOD. - WEATHER DECK MEZZ. NORTH

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

24

Facility/Area Code

Facility

Area

Area Description

EKOJ

P71

PROC. MOD. - UPPER WEATHER DECK SOUTH

P72

PROC. MOD. - UPPER WEATHER DECK NORTH

R00

RISER MODULE

R01

24” OIL RISER FROM ELDF

R02

30” GAS RISER FROM ELDF

R03

14” OIL/GAS RISER FROM TOR

R04

34" OIL RISER, EKOJ TO TEESIDE

R05

36" GAS RISER,EKOJ TO EMDEN

R06

20" OIL RISER FROM VALHALL

R07

20" GAS RISER FROM VALHALL (CANCELLED)

R08

20" OIL RISER FROM ULA

R09

12" GAS RISER FROM GYDA

R10

6" GAS FUEL RISER, EKOJ TO EKOK

R11

J – TUBE FIBRE OPTIC CABLE & EMDEN SSIV UMBILICAL

R12

J – TUBE FOR TEESIDE SSIV UMBILICAL

S00

SEPARATION MODULE - GENERAL

S10

SEP. MOD. - LEVEL 1

S11

SEP. MOD. - LEVEL 1 SOUTH

S12

SEP. MOD. - LEVEL 1 NORTH

S15

SEP. MOD. - LEVEL 1 & LEV. 1 MEZZ. (S10&S20)

S20

SEP. MOD. - LEVEL 1 MEZZ.

S21

SEP. MOD. - LEVEL 1 MEZZ. SOUTH

S22

SEP. MOD. - LEVEL 1 MEZZ.NORTH

S30

SEP. MOD. - LEVEL 2

S31

SEP. MOD. - LEVEL 2 SOUTH

S32

SEP. MOD. - LEVEL 2 NORTH

S35

SEP. MOD. - LEVEL 2 & MEZZ. (S30&S40)

S40

SEP. MOD. - LEVEL 2 MEZZ.

S41

SEP. MOD. - LEVEL 2 MEZZ. SOUTH

S42

SEP. MOD. - LEVEL 2 MEZZ. NORTH

S50

SEP. MOD. - WEATHER DECK

S51

SEP. MOD. - WEATHER DECK SOUTH

S52

SEP. MOD. - WEATHER DECK NORTH

S60

SEP. MOD. - WEATHER DECK MEZZ.

S61

SEP. MOD. - WEATHER DECK MEZZ. SOUTH

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

25

Facility/Area Code

Facility

Area

Area Description

EKOJ

S62

SEP. MOD. - WEATHER DECK MEZZ. NORTH

S70

SEP. MOD. - UPPER WEATHER DECK

S71

SEP. MOD. - UPPER WEATHER DECK SOUTH

S72

SEP. MOD. - UPPER WEATHER DECK NORTH

U00

UTILITIES MODULE - GENERAL

U10

UTIL. MOD. - LEVEL 1

U11

UTIL. MOD. - LEVEL 1 SOUTH

U12

UTIL. MOD. - LEVEL 1 NORTH

U20

UTIL. MOD. - LEVEL 1 MEZZ.

U21

UTIL. MOD. - LEVEL 1 MEZZ. SOUTH

U22

UTIL. MOD. - LEVEL 1 MEZZ. NORTH

U30

UTIL. MOD. - LEVEL 2

U31

UTIL. MOD. - LEVEL 2 SOUTH

U32

UTIL. MOD. - LEVEL 2 NORTH

U35

UTIL. MOD. - LEVEL 2 & LEV. 2 MEZZ. (U30&U40)

U40

UTIL. MOD. - LEVEL 2 MEZZ.

U41

UTIL. MOD. - LEVEL 2 MEZZ. SOUTH

U42

UTIL. MOD. - LEVEL 2 MEZZ. NORTH

U50

UTIL. MOD. - LEVEL 3

U51

UTIL. MOD. - LEVEL 3 SOUTH

U52

UTIL. MOD. - LEVEL 3 NORTH

Z00

HOOK-UP, GENERAL EKO-J - EKOX

ZBX

HOOK-UP, B01 - EKOX

ZCB

HOOK-UP, C00 - B01

ZCJ

HOOK-UP, C00 - J00

ZJC

HOOK-UP, EKOJ - EKOC

ZJF

HOOK-UP, EKOJ - EKOF

ZJH

HOOK-UP, EKOJ - EKOH

ZJR

HOOK-UP, EKOJ - EKOR

ZJX

HOOK-UP, EKOJ - EKOX

ZPC

HOOK-UP, P00 - C00

ZPF

HOOK-UP, P00 - F00

ZPI

HOOK-UP, P00 - I00

ZSC

HOOK-UP, S00 - C00

ZSP

HOOK-UP, S00 - P00

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

26

Facility/Area Code

Facility

Area

Area Description

EKOJ

ZUC

HOOK-UP, U00 - C00

ZUP

HOOK-UP, U00 - P00

ZUS

HOOK-UP, U00 - S00

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

27

Facility/Area Code

Facility

Area

Area Description

EKOK

A00

PLATFORM GENERAL

B01

BRIGDE EKOK TO EKOB

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

L01

12" WATER EKOK TO EKOW

R01

12" WATER INJECTION RISER TO EKOW

R02

24” WATER INJECTION RISER FROM ELDE

R03

6” FUEL GAS RISER FROM EKOJ

13A

CELLAR DECK - GENERAL

13C

CELLAR DECK CENTRE

13N

CELLAR DECK NORTH

13S

CELLAR DECK SOUTH

15A

UTILITY MODULE

15B

POWER MODULE

15C

WATER INJECTION MODULE

15D

WATER TREATMENT MODULE

15E

WELLHEAD MODULE

15F

DEAREATOR

16A

ACCOMMODATION

16B

BULK MODULE

16C

PUMP MODULE

16D

RESERVE MODULE

16E

ENGINE MODULE

16F

SKID BASE

16G

SUBSTRUCTURE

16H

DERRICK

16K

NOT IN USE (COMPLETION RIG, REMOVED)

16L

NOT IN USE (PUMP & MUD MOD, COMP RIG)

16M

NOT IN USE (ENGINE MOD, COMPL. RIG)

17A

NOT IN USE (BRIDGE) Replaced by B01

18A

FLARE BOOM

19A

HELIDECK

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

28

Facility/Area Code

Facility

Area

Area Description

EKOL

A00

PLATFORM GENERAL (FUTURE)

B01

EKOL TO EKOM

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

29

Facility/Area Code

Facility

Area

Area Description

EKOM

A00

PLATFORM GENERAL

B00

BRIDGE GENERAL

B01

EKOM TO BRIDGE SUPPORT T01

B02

BRIDGE SUPPORT T01 TO EKOJ

J01

JACKET (EXCEPT RISERS)

K01

DECK CRANE

K01-01

DECK CRANE PEDESTAL

K01-02

DECK CRANE CABIN

K01-03

DECK CRANE MACHINE ROOM

L05

6" GAS LIFT EXPORT PIPELINE TO EKOA

P00

PROCESS AREA-GENERAL

P01

PIPE SUPPORT RACK

P01-20

STORAGE AREA FOR OIL & CHEMICALS

P01-21

STORAGE AREA FOR PRESSURISED BOTTLES

P01-22

STORAGE AREA FOR OXYGEN BOTTLES

P01-23

CRANE BOOM REST

P30

PROCESS AREA LEVEL 1 INTERM. DECK

P30-01

HYDROCYCLONE SKID AREA (EAST)

P30-02

SEPARATOR VALVE AREA

P30-03

CRUDE OIL COOLER AREA

P30-04

HPU SKID AREA

P30-05

HYDROCYCLONE SKID AREA (WEST)

P30-06

DIESEL TREATMENT AREA

P30-10

ESCAPE ROUTE (NORTH)

P30-11

ESCAPE ROUTE (EAST)

P30-12

ESCAPE ROUTE (SOUTH)

P30-13

ESCAPE ROUTE (WEST)

P30-14

STAIRS (SOUTH)

P30-20

HANDLING AREA (NORTH)

P30-21

HANDLING AREA (SOUTH)

P40

PROCESS AREA LEVEL 2 INTERM. DECK-MEZZ

P40-01

HP PRODUCTION WATER COALESCER AREA

P40-02

HP PRODUCTION SEPARATOR AREA

P40-03

CHEMICAL INJECTION SKID AREA

P40-04

FLASH TANK AREA

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

30

Facility/Area Code

Facility

Area

Area Description

EKOM

P40-05

REJECT OIL TREATMENT SKID AREA

P40-06

TEST SEPARATOR AREA

P40-10

ESCAPE ROUTE (NORTH)

P40-11

ESCAPE ROUTE (WEST)

P40-12

ESCAPE ROUTE (SOUTH)

P40-13

ESCAPE ROUTE

P40-14

HANDLING AREA

P50

PROCESS AR5A LEVEL 3 WEATHER DECK

P50-01

PSV AREA (EAST)

P50-02

PSV AREA (WEST)

P50-03

TEMPORARY STORAGE AREA

P50-04

SCALE INHIBITOR AREA

P50-10

ESCAPE ROUTE (NORTH)

P50-11

ESCAPE ROUTE (WEST)

P50-12

ESCAPE ROUTE (EAST)

P50-13

ESCAPE ROUTE (SOUTH)

P50-14

ESCAPE AREA (SOUTH)

P50-20

HAZARDOUS WASTE STORAGE

P50-22

FUTURE PIG HANDLING AREA (NORTH)

P50-23

FUTURE PIG RECEIVER AREA (NORTH)

P50-24

STAIR TO P60 DECK

P50-25

LIFT MACHINE ROOM

P50-30

TEMPORARY GENERATOR AREA

P50-31

PIG RECEIVER AREA (SOUTH)

P50-32

PIG HANDLING AREA (SOUTH)

P60

PROCESS AREA LEVEL 4 TOTE TANK DECK

P60-01

ESCAPE ROUTE (WEST)

P60-02

TOTE TANK AREA

P60-03

ESCAPE ROUTE (SOUTH)

P60-04

ESCAPE ROUTE (SOUTH)

P60-05

ESCAPE ROUTE (SOUTHWEST)

P60-06

ESCAPE ROUTE (EAST)

P60-31

VALVE AREA FOR PIG RECEIVERS

R00

RISERS-GENERAL

R01

20" EXPORT RISER (FUTURE)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

31

Facility/Area Code

Facility

Area

Area Description

EKOM

R02

20" OIL IMPORT RISER FROM EKOB(FUTURE)

R03

16" WEST EKOFISK PROD. IMPORT RISER(FUTURE)

R04

17" OIL IMPORT RISER FROM EKOA

R05

6" GAS LIFT EXPORT RISER TO EKOA(FUTURE)

R06

16" NEW SUBSEA DEVELOP. IMPORT RISER(FUTURE)

R07

10" J-TUBE-UMBILICAL TO EKOA(J3)(FUTURE)

R08

10" J-TUBE ELECT./UMBILICAL(J2) (FUTURE)

R09

10" J-TUBE ELECT./UMBILICAL(J1) (FUTURE)

R10

16" J-TUBE HYDRAULICS(J4) (FUTURE)

R11

16" J-TUBE HYDRAULICS(J5) (FUTURE)

T01

BRIDGE SUPPORT

U00

UTILITY AREA-GENERAL

U09

UTILITY AREA UNDER CELLAR DECK

U09-01

OPEN DRAIN AREA

U10

UTILITY AREA LEVEL 1 CELLAR DECK

U10-01

TRANSFORMER ROOM

U10-02

DELUGE SKID AREA

U10-03

CAISSON AREA

U10-04

BATTERY ROOM

U10-05

MECHANICAL WORKSHOP

U10-06

ELECT/INSTR./TELECOMS WORKSHOP

U10-07

HVAC ROOM SUPPLY

U10-08

J-TUBE AREA

U10-09

HVAC ROOM EXTRACT

U10-10

FIRE TEAM ROOM

U10-11

HPU AREA

U10-12

HVAC INLET

U10-13

WELL SERVICE PUMP ROOM

U10-19

ESCAPE ROUTE (EAST)

U10-20

ESCAPE ROUTE (NORTH)

U10-21

ESCAPE ROUTE (WEST)

U10-22

ESCAPE ROUTE (SOUTHWEST)

U10-23

STAIR TOWER (WEST)

U10-24

LIFT

U10-25

TRUCK PARK

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

32

Facility/Area Code

Facility

Area

Area Description

EKOM

U10-27

BRIDGE LANDING AREA (NORTH)

U10-28

LIFEBOAT STATION

U10-29

MUSTER AREA

U10-30

WASTE SORTING AREA

U10-31

CARGO CONTAINERS AREA

U10-32

GENERATOR ROOM

U10-33

STAIRS (SOUTHWEST)

U10-34

ESCAPE ROUTE (SOUTH)

U10-35

FRACKING STATION

U10-36

FIN FAN AREA

U10-37

AIR RECEIVER & NITROGEN GENERATOR

U20

UTILITY AREA LEVEL 2 CELLAR DECK-MEZZ.

U20-01

HIGH VOLTAGE ROOM

U20-02

LOW VOLTAGE ROOM

U20-05

EMERGENCY SWITCHGEAR ROOM

U20-06

LOCAL EQUIPMENT ROOM

U20-10

ESCAPE ROUTE (NORTH)

U20-11

ESCAPE ROUTE (WEST)

U20-12

ESCAPE ROUTE (SOUTH)

U20-14

AIR COMPRESSOR ROOM

U20-15

HANDLING AREA

U20-16

WASTE FOOD CONTAINER AREA

U20-17

WIND BREAK

U20-21

ARCHIVE & COPY ROOM

U20-22

OFFICE 1

U20-23

OFFICE 2

U20-24

MEETING & RECREATION ROOM

U20-25

COFFEE BAR

U20-26

PC-OFFICE

U20-27

RECREATION ROOM, SMOKING

U20-30

CORRIDOR

U20-31

BROOM CLOSET

U20-32

WC 1

U20-33

WC 2

U20-34

URINAL

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

33

Facility/Area Code

Facility

Area

Area Description

EKOM

W00

WELLBAY AREA-GENERAL

W09

WELLBAY AREA UNDER CELLAR DECK

W09-01

DRAIN TANK AREA

W09-02

DRAIN PUMP AREA

W10

WELLBAY AREA LEVEL 1 CELLAR DECK

W10-01

WELLBAY AREA (NORTH)

W10-02

WELLBAY AREA (SOUTH)

W10-03

MANIFOLD AREA (NORTH)

W10-04

MANIFOLD AREA (SOUTH)

W10-05

RISER AREA (NORTH)

W10-06

RISER AREA (SOUTH)

W10-07

FUTURE PUMP AREA

W10-08

HOSE LOADING STATION

W10-09

ESCAPE ROUTE (EAST)

W10-10

STAIRS (NORTH)

W10-11

STAIRS (SOUTH)

W10-12

ESCAPE ROUTE (NORTH)

W10-14

ESCAPE ROUTE (SOUTH)

W10-15

ESCAPE ROUTE WEST

W20

WELLBAY AREA LEVEL 2 CELLAR DECK-MEZZ.

W20-01

WELLBAY AREA (NORTH)

W20-02

WELLBAY AREA (SOUTH)

W20-03

MANIFOLD VALVE ACCESS DECK (NORTH)

W20-04

MANIFOLD VALVE ACCESS DECK (SOUTH)

W20-05

ESD & TANK AREA (NORTH)

W20-06

ESD & TANK AREA (SOUTH)

W20-10

ESCAPE ROUTE (NORTH)

W20-11

ESCAPE ROUTE (WEST)

W20-12

ESCAPE ROUTE (SOUTHWEST)

W20-13

ESCAPE ROUTE (NORTHEAST)

W20-14

ESCAPE ROUTE (SOUTHEAST)

W30

WELLBAY AREA LEVEL 3 INTERV. DECK

W30-01

WELLBAY AREA (NORTH)

W30-02

WELLBAY AREA (SOUTH)

W30-03

INTERVENTION SKID RAILS AREA (NORTH)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

34

Facility/Area Code

Facility

Area

Area Description

EKOM

W30-04

INTERVENTION SKID RAILS AREA (SOUTH)

W30-05

SLURRY TANK AREA

W30-06

HIGH PRESSURE PUMP AREA

W30-07

FUTURE RISER ESD VALVE AREA (NORTH)

W30-08

FUTURE RISER ESD VALVE AREA (SOUTH)

W30-09

LAYDOWN AREA (NORTH)

W30-10

LAYDOWN AREA (SOUTH)

W30-11

ESCAPE ROUTE (EAST)

W30-12

ESCAPE ROUTE (SOUTH)

W30-13

ESCAPE ROUTE (WEST)

W30-14

ESCAPE ROUTE (NORTH)

W30-15

FRACKING STATION

W40

WELLBAY AREA LEVEL 4 INTERV. DECK-MEZZ.

W40-01

SLURRY TANK AREA

W40-02

HYDRAULIC POWER PACK AREA

W40-03

HIGH PRESSURE MANIFOILD AREA

W40-05

AREA FOR SIMOPS CABIN

W40-10

ESCAPE ROUTE (NORTH)

W40-11

ESCAPE ROUTE (EAST)

W40-12

ESCAPE ROUTE (SOUTH)

W50

WELLBAY AREA LEVEL 5 WEATHER DECK

W50-01

PSV AREA (NORTH)

W50-02

PSV AREA (SOUTH)

W50-03

WELLBAY WEATHER DECK AREA (NORTH)

W50-04

WELLBAY WEATHER DECK AREA (SOUTH)

W50-05

BRIDGE LANDING AREA FOR JACK-UP RIG (NORTH)

W50-06

BRIDGE LANDING AREA FOR JACK-UP RIG (SOUTH)

W50-07

STORAGE AREA FOR RADIOACTIVE ISOTOPE

W50-08

LAYDOWN AREA (SOUTH)

W50-20

ESCAPE ROUTE (NORTH)

W50-21

ESCAPE ROUTE (EAST)

W50-22

ESCAPE ROUTE (SOUTH)

W50-23

ESCAPE ROUTE (SOUTHWEST)

W50-24

ESCAPE ROUTE (WEST)

Z01

HOOK-UP AREA, P01 B01

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

35

Facility/Area Code

Facility

Area

Area Description

EKOM

Z02

HOOK-UP AREA, B01 T01 - B02

Z03

HOOK-UP AREA, B02 C11 (EKOJ)

Z04

HOOK-UP AREA, B01 J01

Z09

HOOK-UP AREA, U09 - W09 - J01

Z10

HOOK-UP AREA, U10 - W10

Z20

HOOK-UP AREA, U20 - W20

Z30

HOOK-UP AREA, P30 W30

Z50

HOOK-UP AREA, P50 W50

Z60

HOOK-UP AREA, P60

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

36

Facility/Area Code

Facility

Area

Area Description

EKOQ

A00

GENERAL

J01

ALL JACKET (EXCEPT RISERS)

P01

PIPELINE

Q01

QUARTERS 1ST FLOOR

Q02

QUARTERS 2ND FLOOR

Q03

QUARTERS 3RD FLOOR

Q04

QUARTERS 4TH FLOOR

Q05

QUARTERS ROOF

U01

FIREWATER PUMP ROOM

U02

BRIDGE AREA

A00

PLATFORM GENERAL

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE

P01

CELLAR DECK

P02

MEZZANINE DECK

R01

12" WATER INJECTION RISER FROM EKOK

U01

WEATHER DECK

EKOW

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

37

Facility/Area Code

Facility

Area

Area Description

EKOX

A00

PLATFORM GENERAL

B01

BRIDGE EKOX - EKOC

C00

MODULE SUPPORT FRAME - GENERAL

C01

MSF - CELLAR DECK

D00

DRILLING GENERAL

D10

CAPPING BEAM LEVEL

D11

SKID BEAM

D12

SKID BEAM

D13

SKID BRACE

D14

SKID BRACE

D15

N/S SKID JACK

D16

N/S SKID JACK

D17

N/S SKID JACK

D18

N/S SKID JACK

D20

BOP LEVEL

D21

PRIMARY MUD BOX

D22

BOP CONTROL BOX

D23

BOP DECK

D24

BOP PLATFORM

D25

E/W SKID JACK

D26

E/W SKID JACK

D30

SHAKER DECK LEVEL

D31

SHAKER BOX

D32

UTILITY BOX

D40

DRILL FLOOR LEVEL

D41

DRILL FLOOR

D42

WINDWALLS, V-DOOR AND WIRELINE DOOR

D43

NORTH STAIRS

D44

SOUTH STAIRS

D45

DRILLERS' CABIN

D46

MANIFOLD BOX

D47

MCC BOX

D48

WORK AREA BOX

D50

RIG FLOOR ROOF

D60

DERRICK GENERAL

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

38

Facility/Area Code

Facility

Area

Area Description

EKOX

D70

MUD MODULE LOWER LEVEL

D75

SLURRY UNIT MODULE

D80

MUD MODULE MEZZANINE LEVEL

D90

MUD MODULE PIPE DECK LEVEL

J01

JACKET (EXCEPT RISERS)

K13

DECK CRANE SOUTH

K14

DECK CRANE NORTH

T01

BRIDGE SUPPORT (TRIPOD)

U10

UTILITY AREA CELLAR DECK

U20

UTILITY AREA MEZZANINE DECK

U30

UTILITY AREA WEATHER DECK

W00

WELLHEAD AREA GENERAL

W11

WELLHEAD AREA 1 CELLAR DECK

W12

WELLHEAD AREA 2 CELLER DECK

W21

WELLHEAD AREA 1 MEZZANINE DECK

W22

WELLHEAD AREA 2 MEZZANINE DECK

W31

WELLHEAD AREA 1 WEATHER DECK

W32

WELLHEAD AREA 2 WEATHER DECK

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

39

Facility/Area Code

Facility

Area

Area Description

ELDA

A00

PLATFORM GENERAL

B01

BRIDGE ELDA TO ELDF

D01

DERRICK

D02

EAST SHALE SHAKER ROOM (MODULE 128)

D03

NOT IN USE (WEST SHALE SHAKER ROOM (MOD. 121)

D04

SKID DECK

D05

WELLHEAD MEZZ DECK WEST

D06

WELLHEAD MEZZ DECK EAST

D07

SCALE INHIBITOR VALVE RACK AREA

D08

WELLHEAD AREA (MODULE 113 & 104)

D09

INHIBITOR STORAGE AREA (MOD 112)

D10

BULK STORAGE & HYDRAULIC SKID (MODULE 103)

D11

EAST OF SWITCHGEAR ROOM

D12

WEST OF SWITCHGEAR ROOM

D13

PIPE RACK AREA

D14

TPM OFFICE/WORKSHOP AREA (MODULE 122)

D15

DRILLING SUPPORT/SLURRY AREA (MODULE 115-118)

D16

CONDUCTOR AREA CELLAR DECK (MODULE 198)

D17

(PA17) DRILLERS CABIN

D20

(PA20) MUD TANK MODULE

D21

(PA21) MUD PUMP MODULE

D22

(PA22) MUD MIXING MODULE

D23

(PA23) SACK CUTTER MODULE

D24

(PA24) MAIN GENERATOR NO 1 BOX UPPER DECK

D25

(PA25) LER MODULE

D26

(PA26) LER MODULE

D27

(PA27) NORTH STAIRTOWER

D28

(PA28) SOUTH STAIRTOWER

D31

(PA31) SKIDBASE

D32

(PA32) MUD TANK NO. 2 BOX LOWER DECK

D33

(PA33) MUD TANK NO. 3 BOX LOWER DECK

D34

(PA34) MUD PUMP NO. 2 BOX MEZZ. DECK

D35

(PA35) MUD PUMP NO. 3 BOX MEZZ. DECK

D36

(PA36) MAIN GEN. NO. 2 BOX UPPER DECK

D37

(PA37) MAIN GEN. NO. 3 BOX UPPER DECK

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

40

Facility/Area Code

Facility

Area

Area Description

ELDA

D38

(PA38) LOCAL INST. ROOM ROOF LEVEL

D39

(PA39) LOCAL ELEC. ROOM ROOF LEVEL

H01

HELIDECK & SUPPORT

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

P01

CONTROL ROOM

Q01

QUARTERS 1ST FLOOR

Q02

QUARTERS 2ND FLOOR

Q03

QUARTERS 3RD FLOOR

Q04

QUARTERS 4TH FLOOR

Q05

QUARTERS 5TH FLOOR

Q06

QUARTERS 6TH FLOOR

Q07

QUARTERS ROOF

U01

SWITCHGEAR/MCC ROOM (MODULE 105)

U02

BULK STORAGE (MOD. 116/117/118)

U03

WHS, STORES & OFFICE AREA (MODULES 123/124/125)

U04

EQUIPMENT STORAGE MEZZ DECK (MODULE 112)

U05

EAST UTILITY AREA (MODULE 111)

U06

WEST UTILITY AREA (MODULE 102)

U07

GENERATOR ROOM (MODULE 105)

U08

CELLAR DECK CENTER (MODULE 197)

U09

CELLAR DECK NORTH (MODULE 197)

U10

AIR HANDLING AREA (MODULE 198)

U11

POTABLE WATER DECK TANK NORTH

U12

POTABLE WATER DECK TANK WEST

U13

DIESEL STORAGE DECK TANK WEST

U14

DIESEL STORAGE DECK TANK CENTER

U15

DIESEL STORAGE DECK TANK EAST

U16

RAW WATER DECK TANK EAST

U17

RAW WATER DECK TANK CENTER

U18

RAW WATER DECK TANK WEST

U19

COLLECTION SUMP AREA

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

41

Facility/Area Code

Facility

Area

Area Description

ELDB

A00

PLATFORM GENERAL

B01

BRIDGE ELDB TO FLARE

D01

DERRICK (MODULE 342)

D02

DRILL FLOOR (MODULE 341)

D03

BOP DECK (MODULE 341)

D04

SKID DECK

D05

MUD HOPPER AREA (MODULE 325)

D06

CEMENT & ACIDIZING AREA (MODULE 351)

D07

MUD TANKS & PUMPS (MODULE 342)

D08

PIPE RACK AREA (MODDULE 352)

D09

EAST BURNE BOOM

D10

WEST BURNER BOOM

D11

WELLHEAD AREA (MODULE 324)

D12

WELLHEAD AREA ON CELLAR DECK (MODULE 324)

D13

CAT ENGINE ROOM (MODULE 341)

F01

FLARE & STRUCTURE

H01

HELIDECK & SUPPORT

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE

K02

WEST CRANE

L01

24” OIL PIPELINE, ELDB TO EKOJ

L02

30” GAS PIPELINE, ELDB TO EKOJ

P01

CONTROL ROOM (MODULE 321)

P02

GAS PIG LAUNCHER AREA (MODULE 325)

P03

PRODUCTION AREA ON CELLAR DECK

P04

PROD. COOLERS & SEPARATORS (MOD. 333/334)

P05

TEST SEPARATOR & METERING AREA (MOD. 322/323)

P06

NOT IN USE (GAS DEHYDRATION AREA (MOD. 335))

P07

GAS COMPRESSOR ROOM (MODULE 352)

P08

WATER TREATMENT AREA

Q01

QUARTERS 1ST FLOOR

Q02

QUARTERS 2ND FLOOR

Q03

QUARTERS 3RD FLOOR

Q04

QUARTERS 4TH FLOOR

Q05

QUARTERS 5TH FLOOR

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

42

Facility/Area Code

Facility

Area

Area Description

ELDB

Q06

QUARTERS 6TH FLOOR

Q07

QUARTERS ROOF

R01

24” OIL RISER FROM ELDF

R02

30” GAS RISER FROM ELDF

R03

24” OIL RISER, ELDB TO EKOJ

R04

30” GAS RISER, ELDB TO EKOJ

R05

14” WATER INJECTION RISER FROM ELDE

R06

6” GAS LIFT RISER FROM ELDE

T01

FLARE SUPPORT

U01

UTILITY AREA ON CELLAR DECK

U02

FIREWATER PUMP AREA EAST (MODULE 332)

U03

POWER STATION (MODULE 336)

U04

OILY WATER TREATMENT

U05

SWITCHGEAR ROOM (MODULE 336)

U06

HOT OIL HEATER AREA (MODULE 373)

U07

NO. 1 POTABLE WATER TANK

U08

NO. 2 POTABLE WATER TANK

U09

NO. 1 DIESEL FUEL TANK

U10

NO. 1 RAW FRESH WATER TANK

U11

NO. 2 RAW FRESH WATER TANK

U12

NO. 2 DIESEL FUEL TANK

U13

PIG RECEIVER AREA (NEW)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

43

Facility/Area Code

Facility

Area

Area Description

ELDE

A00

PLATFORM GENERAL

B01

BRIDGE ELDE TO ELDF

J01

JACKET

K01

PLATFORM CRANE

L01

24" WATER INJECTION PIPELINE TO EKOK

L02

14" WATER INJECTION PIPELINE TO ELDB

L03

6" GAS LIFT PIPELINE TO ELDB

P00

PROCESS AREA - GENERAL

P01

WATER INJECTION AREA - GENERAL

P02

GAS TREATMENT AREA - GENERAL

P11

WATER INJECTION AREA - CELLAR DECK

P12

GAS TREATMENT AREA - CELLAR DECK

P21

WATER INJECTION AREA - MEZZANINE DECK

P22

GAS TREATMENT AREA - MEZZANINE DECK

P41

WATER INJECTION AREA - WEATHER DECK

P42

GAS TREATMENT AREA - WEATHER DECK

P02

GAS TREATMENT AREA - GENERAL

P12

GAS TREATMENT AREA - CELLAR DECK

P22

GAS TREATMENT AREA - MEZZANINE DECK

P42

GAS TREATMENT AREA - WEATHER DECK

R01

24" WATER INJECTION RISER TO EKOK

R02

14" WATER INJECTION RISER TO ELDB

R03

6" GAS LIFT RISER TO ELDB

U00

UTILITY MODULE - GENERAL

U10

UTILITY MODULE - CELLAR DECK

U20

UTILITY MODULE - MEZZANINE DECK

U30

UTILITY MODULE - UPPER MEZZANINE DECK

U40

UTILITY MODULE WEATHER DECK

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

44

Facility/Area Code

Facility

Area

Area Description

ELDF

A00

PLATFORM GENERAL

B01

BRIDGE 1 ELDF TO BRIDGE SUPPORT

B02

BRIDGE 2 BRIDGE SUPPORT TO FLARE

F01

FLARE & STRUCTURE

J01

JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

L01

24" OIL PIPELINE, ELDF TO ELDB

L02

30" GAS PIPELINE, ELDF TO ELDB

P01

CONTROL ROOM

P02

DEGASSING POT AREA (MOD. 207)

P03

GLYCOL STORAGE AREA (MOD. 206)

P04

GAS/GAS EXCH. AREA (MOD. 205)

P05

NOT IN USE (COMP. SUCTION SCRUBBER AREA (MOD. 204)

P06

PIG LAUNCHER AREA (MOD. 202/203)

P07

PROVER LOOP AREA (MOD. 201)

P08

GLYCOL STILL SURGE TANK AREA (MOD. 214)

P09

PROD. SEP. AREA (MOD. 203)

P10

PROD. COOLER AREA (MOD. 201 TO 204)

P11

PIG RECEIVER AREA

P12

WATER TREATMENT AREA (NEW)

R01

24" OIL RISER, ELDF TO ELDB

R02

30" GAS RISER, ELDFTO ELDB

R03

14” OIL/GAS RISER FROM EMBL

R04

J – TUBE FOR UMBILICAL TO EMBLA

T01

BRIDGE SUPPORT

T02

FLARE SUPPORT

U01

BATTERY ROOM AREA

U02

MAINTENANCE AREA

U03

FLASH TANK AREA

U04

OIL SUMP TANK AREA

U05

AIR RECEIVERS AREA

U06

FIREWATER PUMP AREA

U07

TURBINE ROOM

U08

HOT OIL HEATER AREA (MOD. 214)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

45

Facility/Area Code

Facility

Area

Area Description

ELDF

U09

TURBINE EXHAUST AREA (MOD. 212/213)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

46

Facility/Area Code

Facility

Area

Area Description

EMBL

A00

PLATFORM GENERAL

D01

WELLHEAD AREA

D02

BURNER BOOM

D03

VENT STACK

H01

HELIDECK & SUPPORT

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

L01

14" OIL/GAS EMBL TO ELDF

P01

PROCESS AREA

R01

14" OIL/GAS RISER TO ELDF

R02

J – TUBE FOR UMBILICAL FROM ELDF

U01

PERSONNEL ROOM AREA

U02

CONTROL ROOM AREA

U03

SWITCHROOM AREA

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

47

Facility/Area Code

Facility

Area

Area Description

H7

A00

PLATFORM GENERAL

H01

HELIDECK & SUPPORT

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

P01

CONTROL ROOM

P02

RECEIVER/LAUNCHER AREA

P03

INLET GAS SCRUBBER AREA

P04

RECYCLE COOLER AREA

Q01

QUARTERS 1ST FLOOR

Q02

QUARTERS 2ND FLOOR

Q03

QUARTERS 3RD FLOOR

R01

36" GAS RISER TO EMDEN

R02

36" GAS RISER FROM B11

U01

UTILITY PUMPS AREA

U02

HEATERS/EXCH. AREA

U03

FIREWATER PUMPS AREA

U04

HOT OIL HEATER ROOM

U05

BRIDGE LANDING AREA

U06

UTILITY DECK NORTH

U07

TRANSFORMER AREA

U08

AIR COMP. ROOM

U09

SWITCHGEAR ROOM

U10

GENERATOR ROOM

U11

TURBINE AIR INTAKE AREA

U12

TURBINE ROOM

U13

WORKSHOP/STORES AREA

U14

ROOF LAYDOWN AREA

U15

ROOF UTILITIES AREA

U16

DIESEL STORAGE TANKS

U17

DIESEL STORAGE AND SLOP OIL TANKS

U18

DIESEL STORAGE TANKS

U19

POTABLE AND FRESH WATER STORAGE TANKS

U20

POTABLE AND FRESH WATER STORAGE TANKS

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

48

Facility/Area Code

Total

236

Facility

Area

Area Description

TOR

A00

PLATFORM GENERAL

B01

BRIDGE TO FLARE

D01

DERRICK

D02

DRILL FLOOR

D03

BOP DECK

D04

SKID DECK

D05

SCHLUMBERGER UNIT

D06

CEMENT PUMP UNIT AREA

D07

PIPE RACK AREA

D08

BULK STORAGE AREA

D09

AMINE TANK

D10

MUD TANKS & PUMPS

D11

WELLHEAD AREA

D12

SACK STORAGE AREA

D13

BURNER BOOM

F01

FLARE & STRUCTURE

H01

HELIDECK & SUPPORT

J01

ALL JACKET (EXCEPT RISERS)

K01

EAST CRANE & PEDESTAL

K02

WEST CRANE & PEDESTAL

L01

NOT IN USE (12" OIL TOR TO EKOR) (Closed and filled with water)

L03

14" OIL/GAS TOR TO EKOJ

P01

CONTROL ROOM

P02

LAUNCHER AREA

P03

EXCHANGER AND GLYCOL SYSTEM

P04

METERING & PROVING

P05

SEPARATOR AREA

P06

GAS LIFT MODULE

P07

CELLAR DECK SOUTH EAST

Q01

QUARTERS 1ST FLOOR

Q02

QUARTERS 2ND FLOOR

Q03

QUARTERS 3RD FLOOR

Q04

QUARTERS 4TH FLOOR

Q05

QUARTERS 5TH FLOOR

Q06

QUARTERS 6TH FLOOR

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

49

Facility/Area Code

Total

236

Facility

Area

Area Description

TOR

Q07

QUARTERS ROOF

R01

NOT IN USE (12" OIL RISER TO EKOR) (Closed and filled with water)

R03

14" OIL/GAS RISER TO EKOJ

T01

FLARE SUPPORT

U01

POTABLE WATER TANK

U02

FRESH WATER TANK NO.1

U03

FRESH WATER TANK NO.2

U04

FRESH WATER TANK NO.3

U05

DIESEL TANK NO.1

U06

DIESEL TANK NO.2

U07

DIESEL TANK NO.3

U08

FIRE WATER EXP. TANK WEST

U09

GLYCOL STORAGE

U10

FIREWATER EXT. TANK EAST

U11

PUMP AREA

U12

GENERATOR ROOM

U13

EAST FIREWATER PUMPS

U14

WORKSHOP & STORES

U15

WEST FIREWATER PUMPS

U16

UTILITIES AREA

U17

SWITCHGEAR ROOM

U18

DIESEL DAY TANK AREA

U19

WAREHOUSE AREA

U20

EMERGENCY GEN. ROOM

U21

CAT. ENGINE ROOM

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

50

Discipline Codes

3

Total

236

Discipline Codes This code is applicable for numbering of documents and drawings, specifically those designated as DFO. Engineering Discipline Code consists of one (1) alpha character, and identifies the engineering discipline to which a document/drawing relates. NOTE:

Engineering Discipline Codes are related to disciplines functions, i.e. engineering subjects, they represent no direct connection to the organizational structure or departments in ConocoPhillips.

Code

Engineering Discipline

A

Architectural/Civil

B

Not in Use

C

Not in Use

D

Drilling

E

Electrical

F

Health, Safety & Environmental Engineering HSE (incl. Risk Analysis)

G

Multidiscipline/General Engineering

H

HVAC/Sanitation

I

Instrumentation/Metering

J

Insulation (Thermal/Fire/Acoustic) & Winterization

K

Material Technology (incl. Corrosion Protection & Protective Coating)

L

Subsea & Pipeline (incl. Marine Operations,Templates, Risers & J-tubes)

M

Mechanical (incl. Rotating Equip. Valves, Lifting Equip., Press. Vessels & Heat Exchangers)

N

Not in use in Norway, use code F

O

Operations

P

Piping

Q

Quality

R

Computer & Electronic Control

S

Structural (incl. Jacket, Tripods & Bridges)

T

Telecommunication

U

Process

V

Not in Use

W

Weight Control

X

Inspection

Y

Geoscience

Z

Not in Use

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

51

Discipline Codes

NOTE:

236

Be advised that the discipline table in SAP contain additional codes not used for Norway projects. Only the above codes shall be used for Norway projects.

Document / Revision No. 2169 / 09

Total

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

52

System Number

4

System Number

4.1

System Number

Total

236

System Numbers identifies a process/support/utility system. System Numbers are composed of three (3) characters. The first digit of the system represents the system main group - see 4.2 System Number Group on page 52. NOTE:

4.2

Comments are included to minimize uncertainty when setting system limits. See especially section 4.4 System Boundaries on page 75 where general guidelines for system boundary choices are given.

System Number Group MULTI-SYSTEMS NUMBER System No.

System Description

CAB

System for all cables

G00

Non-specific and across many systems

SIG

Signals

TMP

Temporary equipment

SYSTEM GROUP 0 - WELLHEADS AND FLOWLINES System No.

System Description

000

Wellhead systems general

010

Wellheads and flowlines

020

2-phase production lines

030

Electrical submersible pumps, ESP

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

53

System Number

Total

236

SYSTEM GROUP 1 - OIL/NGL PROCESS System No.

System Description

100

Oil/NGL process systems general

110

High pressure production separation

120

Low pressure production separation

130

Not in Use (Doris oil storage and skimmer.)

140

High pressure test separation

150

Oil/NGL metering, fiscal

160

NGL separation and reinsertion

180

Produced Water

190

Oil export pumping

SYSTEM GROUP 2 - GAS PROCESS System No.

System Description

200

Gas process systems general

210

Gas process compression incl. Export compression

220

Gas dehydration

230

Not in Use (Flash and vent gas compression)

240

Gas desulphurisation

250

Gas metering, fiscal

260

Gas lift

270

Gas injection to reservoir

280

Gas dew point conditioning

290

Start, fuel and blanket gas

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

54

System Number

Total

236

SYSTEM GROUP 3 - WATER INJECTION RESERVOIR STIMULATION System No.

System Description

300

Water injection systems general

310

Sea water supply

320

Water ultra violet sterilisation

330

Water vacuum deaeration

340

Water storage and chemical treatment

350

Water booster pumping

360

Water HP pumping

370

Water export/import risers and pipelines

SYSTEM GROUP 4 - OIL AND GAS EXPORT System No.

System Description

400

Oil and Gas Import/Export Systems General

410

Export risers, pig launchers and pipelines

420

Import risers and pig receivers

430

Oil export pumping

440

Gas export compression

SYSTEM GROUP 5 - PROCESS UTILITY System No.

System Description

500

Open Drain

510

Flare, vent and blow-down

520

Drain system and oily water treatment

530

Chemical injection

540

Glycol circulation and regeneration

550

Not in Use (Propane compression and reclaim)

560

Hot oil

570

Sea water

580

Process inert gas

590

Closed Drain

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

55

System Number

Total

236

SYSTEM GROUP 6 - PROCESS UTILITY AND FACILITY SUPPORT System No.

System Description

600

Closed cooling water

610

Instrument and utility air

620

Process/equipment control and measurement computers

630

Hydraulic power

640

Steam generation and waste heat recovery

650

Diesel fuel

660

High voltage power generation and distribution

670

Low voltage power generation and distribution

690

Jet fuel

SYSTEM GROUP 7 - SAFETY AND LOSS PREVENTION System No.

System Description

700

Safety and loss prevention systems general

710

Water fire fighting

720

Fire fighting and passive fire protection

730

Fire and gas detection

740

Emergency power generation and distribution

750

Safety shutdown system

760

Equipment remote alarm and indication

770

Escape and personnel safety

780

Navigation and identification

790

Not in Use (Personell Protective Systems)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

56

System Number

Total

236

SYSTEM GROUP 8 - FACILITY SYSTEMS System No.

System Description

800

Fresh water (Drill water)

810

Potable water

820

Building and accommodation

830

Heat, ventilation and air condition (HVAC)

840

Mechanical handling, tools and supplies

850

Structures

860

Communication radio links

870

Communication systems general

880

Commercial computer systems

890

Electronic control and protection system

SYSTEM GROUP 9 - DRILLING System No.

System Description

900

Drilling systems general

910

Derrick and derrick substructures

920

Mud handling

930

Cement handling

940

Well control system

950

Rig hydraulic power

960

Rig electric power

970

Rig HVAC system

980

Rig bulk handling

990

Rig air system

9A0

Movable drilling equipment

9B0

Movable drilling tools

9C0

Wire line equipment

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

57

System Number

4.3

Total

236

System Description MULTI – SYSTEM GROUP System CAB – Cable This system covers all cables on a Platform.

System G00 – Multi system, non-specific and across many systems Used for documents containing more than one system. Documentation of criticality assessments, ref. Norsok Z-008 / TCD2 5047.

System SIG – Signals This system covers all signals not coming from/going to a (physical) equipment with a function location tag number eg. transmitters, valves, ie. signals having another function location tag number (sequence number) than the equipment its coming from.

System TMP – Temporary equipment This system includes all temporary equipment on a Platform, ref. Norsok Z-015 – Temporary Equipment / Temporary equipment forms and doc. 6232 – Equipment for temporary use offshore.

SYSTEM GROUP 0 - WELLHEADS AND FLOWLINES System group 0 contains systems that together control and transport oil/gas/NGL from the reservoir up to and including the production/test header.

System 000 - Wellhead and Flowline Systems General The system covers equipment not classified as belonging to a certain system. This may be equipment operating several systems within group "0". Note:

Not used for specific equipment or piping.

System 010 - Wellheads and Flowlines This system covers equipment in connection with production wells, X-mas trees and flowlines for the transport of oil/gas/NGL up to and including the header - valves. Note: •

Water / Gas injection header is part of system 260, 270, 370

•

Water / Gas injection flowlines belong to system 260, 270, 370

•

Production headers are part of system 020

•

Test flowlines are included in system 010

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

58

System Number

Total

236

System 020 - 2-Phase Production Lines This system covers equipment in connection with multi-phase production lines including production header to export riser provided that no separation or other process has been carried out. Separation for well metering only (test separation), where hydrocarbons and water are recombined after metering, is a separate process belonging to system 140 - High pressure test separation. Where a line leaves a wellhead platform and crosses a bridge to a processing platform (for example from 2/4X to 2/4J), the production line limit is the first bridge landing. The line will then continue in the appropriate system for the recipient platform (110, 120 or 140). Note 1: •

Includes Production Header, ref system 010

•

Test headers are included in system 140

•

Production lines without water are also part of system 020.

•

2-phase refers to systems in which hydrocarbons (oil, gas, NGL) and water flow together. Hydrocarbon mixtures where water is not included are considered single phase.

•

For classification and registration of documentation, only systems and sub-systems will be used. I.e: 111 Oil/NGL Recycle system will be registered as 110 High Pressure Production Separation.

Note 2:

System 030 – Electrical Submersible Pumps, ESP This system covers equipment in connection with 2-phase production by means of electrical driven pumps installed in reservoir.

SYSTEM GROUP 1 - OIL/NGL PROCESS System group 1 contains systems that together perform the required processing of produced oil/ NGL/water from production/test header up to the point where the oil/NGL/water is transported to another platform by pumping or landing.

System 100 - Oil/NGL Process Systems General The system covers equipment not classified as belonging to a certain sub-system. This may be equipment operating several systems within group "1".

System 110 - High Pressure Production Separation This system covers equipment from headers and import risers including HP separation/production pumps. If no other separation/process exists, the system covers equipment up to the export launcher. Including OIL/NGL Recycle. Note: •

Where there is only one separator, this will be system 110 irrespective of the actual pressure.

•

For gas down stream of a separator: The piping to the first equipment item in the downstream system shall be part of the separation system. See also Section 4.4 System Boundaries on page 75.

•

System 110 shall not resume following system 150/250 metering.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

59

System Number

Total

236

System 120 - Low Pressure Production Separation This system covers equipment cooler / valve d/s 1st stage (HP) separation up to and including pipe/header after LP separation for further processing, transport, or up to export launcher. LP production pumps are included in the system.

System 130 - Not in Use (Doris Oil Storage and Skimmer) Not in use for existing platforms, information only. The system covers equipment in connection with the storage of oil, the cleaning of produced water, and the cleaning of waste water from drains, etc.

System 140 - Test Separation This system covers equipment from header and import risers up to and including the burner boom. Test production pumps are included in the system. Note: •

Gas and oil piping from the Test Separator belongs to system 140 up to the tie-in point to production piping.

•

The Test Header and piping up to the test separator are part of system 140.

System 150 - Oil/NGL Metering, Fiscal This system covers equipment in connection with the metering of produced/transported oil/NGL. Import metering measures oil brought to the platform. Export metering measures oil leaving the platform. Note: •

This system is limited to the metering skid and its immediate connections.

•

A new system begins immediately down stream of the metering package, either export for export oil or the system the oil flows into for import oil.

System 160 - NGL Separation and Stabilising The system covers equipment in connection with the removal and reclaim of gas from the NGL separated through the gas dew point conditioning system. Note: •

This system is not used. Included in system 280.

System 180 - Produced Water This system covers all equipment in connection with the processing and treatment of produced water. The upstream limit is the connection to the production separator. For produced water that is discharged to sea, system 180 also includes the outfall piping. The reject oil return to the process is also system 180 up to the connection to the separator piping.

System 190 - Oil export pumping This system covers equipment in connection with the pumping of oil from one platform to another, or ashore from a platform. The system covers equipment from the header on the inlet side to the header on the outlet side.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

60

System Number

Total

236

SYSTEM GROUP 2 - GAS PROCESS System group 2 contains systems that together perform the required processing of gas from separators/header up to the point where the gas is transported to another platform or is compressed for landing. The group also contains systems for the injection of gas in wells and reservoirs in general.

System 200 - Gas Process Systems General The system covers equipment not classified as belonging to a certain sub-system. This may be equipment operating several systems within group "2".

System 210 - Gas Process Compression This system covers equipment for the compression (increasing of pressure) of gas from separators and header prior to dehydration.

System 220 - Gas Dehydration This system covers equipment included in the dehydration process for gas in which glycol is used as water-absorbing medium. The upstream limit is the first nozzle on the glycol contactor inlet cooler. The downstream limit is the next equipment item downstream of the dehydration tower. However, on 2/4J, piping up stream of this equipment has also been designated system 220, as there is a change of piping material.

System 230 - Not in Use (Flash and Vent Gas Compression) Not in use for existing platforms, information only. This system covers equipment in connection with the returning to the process of low pressure gas from oil separators and gas dehydration. Note: •

This system is incorporated in system 510.

System 240 - Gas Desulphurisation (sweetening) This system covers equipment in connection with the removal of acidiferous gases from process gas. The system can be separated into sub-systems as required. Normally the gas is cleaned in scrubbers and absorbers, whereas the acidiferous gases are stripped out by regeneration. This system is used on 2/4J for the hydrogen sulphide scavenger system and includes all piping to and from the scavenger injection point and piping from the scavenger separator back to the LP Separation system.

System 250 - Gas Metering, Fiscal This system covers equipment in connection with fiscal metering of produced/transported gas. Import metering measures gas brought to the platform. Export metering measures gas leaving the platform. Start and fuel gas, flare gas and Injection gas are not included in this system, but are metered as part of their respective systems. The system limits in general are the limits of the package itself, including any block valves.

System 260 - Gas Lift This system covers equipment in connection with the compression and injection of process gas for the stimulation of the well stream flow in a well to the surface. The headers and flow lines for gas lift are part of this system, up to the tie in to the wellhead. Note: •

Where gas lift gas is imported via a riser, system 260 begins immediately down stream of the pig receiver.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

61

System Number

Total

236

System 270 - Gas Injection to Reservoir The system covers equipment in connection with the compression and returning of process gas to the reservoir. The system limits are the take-off from the previous start of gas compression or gas export and up to the wellhead for injection, if on a single or bridge-linked system. Otherwise up to the gas injeciton export line. Note: •

Where injection gas is imported via a riser, system 270 begins immediately down stream of the pig receiver.

System 280 - Gas Dew Point Conditioning This system covers equipment included in the separation of NGL still present in the gas after dehydration. The system limit is the first nozzle on the first equipment item in the conditioning train. However, where material change occurs up stream of this item (as on EKOJ) the system limit is taken as the material specification change. The down stream limit is normally the inlet flange to the first equipment item in the connecting system, be it fuel gas, further compression stages or the liquid return to the separation system.

System 290 - Start, Fuel and Blanket Gas This system covers equipment used for the treatment and distribution of fuel gas, blanket gas and gas used as a driver (power) in cranking turbines. The system limits are from the inlet flange on the first equipment item in the fuel gas system up to the inlet to the equipment or system being fed with fuel or blanket gas.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

62

System Number

Total

236

SYSTEM GROUP 3 - WATER INJECTION RESERVOIR STIMULATION System group 3 contains systems for the injection of water in reservoirs.

System 300 - Water Injection Systems General The system covers equipment not classified as belonging to a certain sub-system. This may be equipment operating several systems within group "3".

System 310 - Injection Seawater Supply This system covers equipment in connection with the supply and filtration of seawater to the water treatment and injection facility. Note: •

System 310 finishes at the inlet valve or nozzle to the UV sterilisation unit.

•

Injection water which is incidentally used for cooling purposes is still part of system 310, not system 570.

System 320 - Injection Water Ultraviolet Sterilisation This system covers equipment in connection with the removal of bacteria and microorganisms present in seawater.

System 330 - Injection Water Vacuum Deaeration This system covers equipment in connection with the removal of dissolved gases present in seawater.

System 340 - Injection Water Storage and Chemical Treatment This system covers equipment in connection with the storage, cleaning and addition of chemicals up to the injection point.

System 350 - Injection Water Booster Pumping This system covers equipment in connection with the supply of water with positive pressure to high-pressure pumps.

System 360 - Injection Water HP Pumping This system covers equipment in connection with the high pressure pumping of cleaned water.

System 370 - Injection Water Export/Import Risers, Flowlines and Pipelines This system covers equipment in connection with pipe systems carrying water under high pressure from high pressure pumps to injection wells. The system also covers pipelines carrying water from one platform to another.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

63

System Number

Total

236

SYSTEM GROUP 4 - OIL AND GAS IMPORT/EXPORT System group 4 contains systems required to export oil, NGL and gas from one platform to another, or onshore from a platform.

System 400 - Oil and Gas Import/Export Systems General The system covers equipment not classified as belonging to a certain sub-system. This may be equipment operating several systems within group "4".

System 410 - Export Risers, Pig Launchers and Pipelines This system covers equipment in connection with export/transport of oil, NGL and gas from a platform to a riser on another platform, or onshore from a platform. If pumps and compressors are used, this equipment is covered by separate systems.

System 420 - Import Risers and Pig Receivers This system covers equipment from pipeline J-tube up to and including the first shutdown valve down stream of the kicker line from the pig receiver.

System 430 - Oil Export Pumping This system covers equipment in connection with the pumping of oil from a platform. The system covers equipment from the metering or the header on the inlet side to the pig launcher arrangement on the outlet side.

System 440 - Gas Export Compression This system covers equipment in connection with the compression of gas for transport from a platform. The system covers equipment from the spec break on the inlet side to metering system og pig launcher arrangement on the outlet side.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

64

System Number

Total

236

SYSTEM GROUP 5 - PROCESS UTILITY System group 5 contains systems primarily contributing to the processing of oil/gas/NGL.

System 500 - Open Drains This system covers piping and equipment used for the collection and treatment of water from all open drains. The system is split into Hazardous and Non-Hazardous Open Drain, which originate in areas which can contain oil and gas or unclassified areas, respectively. The Open Drain System includes any sea sump.

System 510 - Flare, Vent and Blow-down This system covers equipment used in connection with the burning and bleed-off to the atmosphere of blanket gas and process gas from pressure tanks and pipes via safety valves and control equipment. System 510 begins immediately down stream of PSVs and PSEs, otherwise down stream of the block valve from the system to be relieved or vented. Note: •

Start on the PSV from equipment and/or directly from equipment with Atm. Vent.

•

Ends in flare tip or burner boom

•

Ends in vent stack or discharge to atmosphere.

System 520 - Drain System and Oily Water Treatment The system covers equipment used for the cleaning of produced water, water from open drains, and deck drains connected to the processing plant. The system also covers equipment used to return oil recovered from the water to the process. Note: •

This system is superfluous and should not be used for future platforms: This equipment is covered by systems 180, 500 and 590.

System 530 - Chemical Injection This system contains equipment used in connection with the injection of chemicals in pipe systems, equipment, utilities and production wells. The system does not cover equipment in connection with the cleaning of water used for reservoir water injection. The system boundary is the injection point.

System 540 - Glycol Circulation and Regeneration This system covers equipment used for storage, circulation, cooling and cleaning/regeneration of glycol primarily used in connection with the dehydration of process gas. The system boundary with system 220 is the flange on the dehydration tower. Glycol filling is part of this system. Glycol injection for hydrate inhibition is part of system 530.

System 550 - Not in Use (Propane compression and reclaim) Not in use for existing platforms., information only. The system covers equipment used for storage, compression and recovery of propane used in connection with gas dew point conditioning.

System 560 - Hot Oil This system covers equipment used for the storage, heating and circulation of oil primarily used for the heating of process gas/oil, or for the heating and evaporation of gases/water from glycol, etc.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

65

System Number

Total

236

System 570 - Seawater This system covers equipment in connection with the pumping and circulation of seawater primarily used to cool produced oil/gas and equipment. Where seawater feeds the fire water system, the system limit is the isolation valve to the fire water system. Any wash down system on the platform is included, up to the firewater system.

System 580 - Process Inert Gas This system covers equipment used for the generation, distribution and injection of fire-resistant gases in processing plants and storage tanks. The system also covers equipment for the cleaning of exhaust gases from combustion engines, boilers and gas turbines used as inert gas. The system boundary up stream is the inlet XV or flange of the inert gas generator, if it is fed from the instrument air system. The down stream boundary is the injection point.

System 590 - Closed Drains This system covers equipment for collecting all liquids drained from pressure vessels and lines and returning collected liquids back to production.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

66

System Number

Total

236

SYSTEM GROUP 6 - PROCESS UTILITY AND FACILITY SUPPORT System group 6 contains process utilities indirectly contributing to the processing of oil, gas and NGL.

System 600 - Closed Cooling Water The system covers equipment in connection with closed cooling-water systems. This type of cooling-water system is primarily used in connection with equipment to which it is necessary to add corrosion-inhibiting chemicals. Note: •

Cooling-water systems incorporated in other equipment, for example, diesel engines do not belong to this system. They shall be included in the system to which the equipment itself belongs.

System 610 - Instrument and Utility Air This system covers equipment used for the compression, storage, dehydration and distribution of compressed air for process control and workshop use, etc. The system boundary between instrument and utility air is at the block valve which shuts in the utility air on PSLL.

System 620 - Computer System General This system covers computers/computer systems and shared display facilities with Safety and F&G System used in connection with process monitoring/control and production/ process measurement. The system also covers equipment in connection with the monitoring and control of specific equipment (e.g. pipeline compressors). The system may contain the following: -

Crane Load Indicator System, CLI

-

Digital Control System, DCS

-

Environmental/Aeronautical Data System, EDS

-

Fluke Data Acquisition System, FDA

-

Measurement Computer Systems, MCS

-

Process Control & Safety System, PCSS

-

Programmable Logic Control systems, PLC

-

Safety Automation System (SAS)

-

Subsidence/Corrosion Monitoring System, SMS/CMI/GPS

-

Telemetry Control System, TCS

System 630 - Hydraulic Power This system covers equipment used for the storage of hydraulic oil, and for the generation and control of pressure. The system is primarily used in connection with the operation of actuatoroperated valves in process control systems. The system also covers associated back-up equipment such as compressed nitrogen.

System 640 - Steam Generation and Waste Heat Recovery This system covers equipment for the generation, distribution and condensation of steam for the heating and cleaning of process equipment, etc. The system also covers equipment in which water is used as a medium for the recovery of waste heat from a processing plant.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

67

System Number

Total

236

System 650 - Diesel Fuel This system covers equipment in connection with bunkering, storage, cleaning and distribution of diesel oil.

System 660 - High Voltage Power Generation and Distribution This system covers equipment in connection with the generation, distribution and transformation of electric power with a voltage higher than 1000V AC (or 1500V DC), emergency power excluded.

System 670 - Low Voltage Power Generation and Distribution This system covers equipment in connection with the generation, distribution and transformation of electric power with a voltage lower than or equal to 1000V AC (or 1500V DC), emergency power excluded. Note: The boundary between high and low voltage power generation and distribution systems (660 and 670) shall occur downstream the transforming equipment where the voltage is below 1000V. Cubicles (MCC's) and switchgears/breakers belong to the supplying system, 660 or 670, depending on the voltage. MCC equipment linked to and limited to drilling systems should be connected to system 960-Rig Electric System, on platforms with separate power generation system for drilling operation.

System 690 - Jet Fuel This system covers equipment in connection with bunkering, storage, cleaning and distribution of jet fuel.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

68

System Number

Total

236

SYSTEM GROUP 7 - SAFETY AND LOSS PREVENTION System group 7 contains safety systems for personnel and equipment.

System 700 - Safety and Loss Prevention Systems General This system covers equipment not classified as belonging to a certain sub-system. This may be equipment operating several systems within group "7".

System 710 - Water Fire Fighting This system covers equipment, such as fire pumps, distribution of firewater, fire extinguishing equipment, foam systems and fireman's equipment. The system may contain the following equipment: -

Deluge Systems

-

Fire Stations

-

Firewater Distribution (ring mains, branches, etc.)

-

Firewater Pumps

-

Hose Reels / Hydrants, incl. hydrant cabinets (monitors)

-

Sprinkler Systems

-

Water Spray Foam Systems

The system boundary between 570 and 710 occurs at the block valve between the two systems.

System 720 - Fire Fighting and Passive Fire Protection This system covers equipment used for the storage and distribution of chemical fire-fighting agents. The system may contain the following equipment: -

Dry Chemicals

-

Equipment Fire Protection (vessel support, etc.)

-

Fire Doors and Fire Rated Windows

-

Fire Extinguishers

-

Fire Partition Penetrations

-

Gas Extinguishing System, incl. Inergen, Co2 etc.

-

Structural Fire Protection and Fire Partitions (fire walls)

-

Structural Water Fill System

-

Water, Mist and Fog Extinguishing System

System 730 - Fire and Gas Detection This system covers equipment used for the detection of open flame, heat, smoke and uncontrolled gas leaks/releases. Stand alone Fire detection panel and Gas detection panel shall be included in this system.

System 740 - Emergency Power Generation and Distribution This system covers equipment used for the generation, batteries, uninterruptable power supply (UPS) and distribution of emergency electric power.

System 750 - Safety Shutdown System This system covers equipment for manually activation of shutdown system, as well as junction boxes and cabinets for safety shutdown systems.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

69

System Number

Total

236

Exception Note: Gas, heat, smoke and flame detectors including fire alarm buttons (FAB) belong to system 730.

System 760 - Equipment Remote Alarm and Indication This system covers critical alarm panel (CAP) and release of fire extinguishing system from the control rooms.

System 770 - Escape and Personnel Safety This system covers equipment in connection with the evacuation and rescue of personnel. The system may contain the following equipment: -

Breating apparatus equipment

-

Escape Chutes

-

Lifeboat Stations, Incl. Davits

-

Life Raft Stations

-

Mob Stations

-

Personal Safety, incl. first aid, eye wash, medical equipment, etc.

-

Rope ladders

System 780 - Navigation and Identification This system covers navigation equipment such as fog signals, identification signs and lights for boat and air traffic.

System 790 – Not In Use (Personnel Protective Systems) Not in use for existing platforms, information only. This system covers equipment used for the protection of personnel against damage caused by the work carried out.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

70

System Number

Total

236

SYSTEM GROUP 8 - FACILITY SYSTEMS System group 8 contains systems for communication, power supply, and for the maintenance and operation of off- and onshore plants.

System 800 - Fresh Water (Drill Water) This system covers equipment in connection with the bunkering, storage, pumping and distribution of fresh water used for washdown etc. The system is used by drilling during drilling operations.

System 810 - Potable Water This system covers equipment in connection with the bunkering, storage, cleaning and distribution of potable water.

System 820 - Building and Accommodation This system contains equipment in connection with buildings (quarters, workshops, control rooms, etc.). Buildings refer to doors, windows, kitchen equipment, laundry equipment and other inventory, sewage treatment and disposal. Tools, machines and other workshop equip. are not covered - see system 840. Permanent installed container structure shall belong to system 820. Equipment belonging to the container shall be linked to its relevant system. Example: -

Deluge/sprinkler (710)

-

Fan (830)

-

Fire damper (830)

-

Heater (830)

-

Light (670)

For temporary containers, please see 4.3 System Description on page 57 multi-system group TMP.

System 830 - Heat, Ventilation and Air Conditioning (HVAC) This system covers equipment in connection with forced ventilation and the treatment of air in connection with closed rooms and partially closed process areas. Note: •

HVAC system for turbines shall have the same system number as the turbine.

System 840 - Mechanical Handling, Tools and Supplies This system covers lifting equipment, tools, machine tools, transport equipment, paint/chemicals supplies and other equipment contributing to the operation and maintenance of offshore platforms or onshore plants. The system may contain the following equipment: -

Chemicals Storage and Bulk System

-

Lifting and Loading Systems

-

Lube Oil Storage and Distribution System

-

Shop Equipment, Tools and Supplies

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

71

System Number

Total

236

System 850 - Structures The system covers steel structures in connection with the platform substructure, support structures, bridge supports, bridges, towers, decks, stairways and skids.

System 860 - Communication Radio Links This system covers equipment in connection with the radio communication between platforms and between platforms and onshore base/ground stations. The system may contain the following equipment: -

Multiplexing Units

-

Radio Link Units

-

Satellite Link Units

Note: For Unit and Tag numbering under this Category please refer to the System 860 information table under the following section: 5.4.2 General Unit Numbers for Telecommunication & Computer Systems (860, 870 & 880) on page 87.

System 870 - Communication Systems - General This system covers equipment in connection with the internal communication systems on a platform, and communication between platforms and ships/boats. Commercial TV and radio systems are also covered, as are optical fiber systems. The system may contain the following equipment: -

Aeronautical Radio Units

-

Base Radio Units

-

Closed Circuit Television Units

-

Crane Radio Units

-

Entertainment Units

-

Global Maritime Distress Safety Units

-

Helicopter Information Units

-

Maritime Life Boat Radio Units

-

Maritime MF/HF Radio Units

-

Master Clock & Synchronizations Units

-

Miscellaneous Communication Units

-

Offshore Drilling/Operation Centre Units

-

Optical Fibre Units

-

PA and Alarm Units

-

Portable Radio Units

-

Radar Units

-

Radio-/Radar Beacon Units

-

Telephone Units

-

Tele & Data Communication Outlets

-

Tele & Data Test Instrument Units

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

72

System Number

-

TV Satellite Units

-

UPS for Tele & Data Units

-

VisiWear Units

Total

236

Note: For Unit and Tag numbering under this Category please refer to the System 870 information table under the following section: 5.4.2 General Unit Numbers for Telecommunication & Computer Systems (860, 870 & 880) on page 87.

System 880 - Commercial Computer Systems This system covers hardware in connection with commercial computer systems. The system may contain the following equipment: -

Automatic Personnel Registration Units

-

Local Area Network Units

-

Miscellaneous Computer Units

-

Office & Personal Computer Units

-

Wireless LAN Units

Note: Process control and measurement computers are covered by system 620. For Unit and Tag numbering under this Category please refer to the System 880 information table under the following section: 5.4.2 General Unit Numbers for Telecommunication & Computer Systems (860, 870 & 880) on page 87.

System 890 - Electronic control and protection system The system covers hardware in connection with control and protection system for rotating equipment. The system may contain the following equipment: -

PCPC Surge Protection Control System

-

TCS Turbine Control System

-

TVC Turbo View Monitoring System

-

VIB Vibration Protection System

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

73

System Number

Total

236

SYSTEM GROUP 9 - DRILLING System group 9 contains systems required in order to carry out drilling operations and workovers. Wellheads are not included. See system group 0.

System 900 - Drilling Systems General This system covers equipment not classified as belonging to a certain sub-system. This may be equipment operating several systems within group "9".

System 910 - Derrick and Derrick Substructure This system covers equipment in connection with the handling of drilling equipment (Derrick mast structure, crown block, travelling block, draw works, swivel, rotary table, pipe handling equipment etc.).

System 920 - Mud Handling This system covers equipment in connection with the mixing, pumping, cleaning of drilling mud (pits, mud pumps, etc.), slurrification and injection units. This system also covers vacuum system.

System 930 - Cement Handling This system covers equipment in connection with the mixing and pumping of cement.

System 940 - Well Control Equipment This system covers equipment (BOP, BOP control system, etc.) in connection with the control of wells during drilling/maintenance operations.

System 950 - Rig Hydraulic Power This system covers equipment used for the storage of hydraulic oil, and for the generation and control of pressure. The system is primarily used in connection with actuator-operated valves (e.g. BOPs), the skidding of drilling derrick (rig) and pipe handling equipment.

System 960 - Rig Electric Power The system covers the generation, transformation, and distribution of electric power. Note: The boundary between high and low voltage power generation and distribution systems (660 and 670) shall occur downstream the transforming equipment where the voltage is below 1000V. Cubicles (MCC's) and switchgears/breakers belong to the supplying system, 660 or 670, depending on the voltage. MCC equipment linked to and limited to drilling systems should be connected to system 960-Rig Electric System, on platforms with separate power generation system for drilling operation.

System 970 - Rig HVAC System The system covers equipment in connection with the heating and ventilation of the drilling module (rig floor heating, drilling office/cabin, ventilation of pits, etc.).

System 980 - Rig Bulk Handling This system covers equipment in connection with the bunkering, storage and transfer of cement and barite bulk.

System 990 - Rig Air System This system covers the compression, dehydration and distribution of instrument and utility air (compressed air).

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

74

System Number

Total

236

System 9A0 - Drilling Equipment Movable This system covers not permanent installed equipment used for drilling operations. The system may contain the following equipment: -

Blow Out Preventer

-

Chicsan 1002

-

Chicsan 1502

-

Elevators

-

Rotary Equipment

-

Safety Equipment

-

Slips and Safety Clamps

-

Support and Utility Equipment

-

Tongs

Note: All temporary equipment shall be in accordance to Norsok Z-015 and doc. 6232.

System 9B0 - Drilling Tools Movable This system covers tools used for drilling operations. The system may contain the following equipment: -

Cross Over Subs

-

Drill Collars

-

Drillpipe and Popjoints

-

Drill String Valves

-

Fishing Tools

-

Heavy Weight Drill Pipe

-

Special Tools, Drift's, Gauges

System 9C0 – Wireline equipment This system covers installed equipment used for well service operation.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

75

System Number

4.4

Total

236

System Boundaries General A system shall be defined according to the medium transported/processed in piping or vessels, or the main function the system performs. In principle, limitation shall occur at the last flange upstream of an equipment or header. However, in order to give a logical split between systems it is necessary to take into consideration other changes, such as splits in pressure class and material of construction. It is preferred to place system breaks at shutdown valves, either ESDV or XV, to the extent this is possible, so that completion and commissioning based on system limits is possible. Equipment used for atmospheric ventilation belongs to the ventilated system unless there is a header and/or a stack serving several systems or equipment. Safety valves (PSV's) and rupture discs (PSEs) including upstream block valves belong to the equipment they protect, everything down stream of the PSV or PSE belongs to the respective flare or vent system. Blowdown valves (BDVs) including piping and down stream block valve belong to the system to be protected. Local indication signals integrated in a loop are considered part of the loop. Primary and secondary systems like coolers and heat exchangers belong to the system classifying the media that is being cooled/heated. Cooling systems for equipment such as a diesel engine shall not be classified as separate systems/sub-systems. The secondary cooling system (e.g. sea water) shall be limited upstream of the heat exchanger. The primary cooling system (e.g. fresh water) belongs to the engine. Consequently, a seawater-cooled fresh-water cooler belongs to the diesel engine fresh water system and is limited against the seawater cooling system at the fresh water cooler's inlet/outlet flanges. The same rule is valid for chillers.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

76

System Number

Total

236

Basic rule #1 Safety Shutdown System All equipment controlling facility/system/equipment shut down belongs to the Safety Shutdown System (750). All equipment monitoring production/process conditions and triggering signals that cause a shut down via shutdown logic, belongs to the system monitored/controlled. This includes switches/transmitter detecting abnormal production/process conditions that result in a shutdown, as well as equipment triggering the shutdown function. (e.g. emergency shutdown valves and solenoid valves, etc.)

Basic rule #2 Equipment remote alarm and indication Alarm panels, process printers, meters, recorders, etc. which are common for two or more equipment/systems, belongs to system 760 - Remote alarm and indication. Computers used for system/equipment monitoring/control belong to sys tem 620 - Process/equipment control and measurement computers. Note: Transmitters/switches, activating alarms or indications requiring control belong to the system/equipment monitored/controlled. Also equipment performing the required control functions (e.g. control valves, dampers, switches etc.) belong to the system/equipment controlled.

Basic rule #3 Electrical equipment The boundary between high and low voltage power generation and distribution systems (660 and 670) shall occur downstream the transforming equipment where the voltage is below 1000V. The electricity supply to consumers (electrical motors, lightning panel etc.) shall be limited at the terminal block for the consumer. Cubicles (MCC's) and switchgears/breakers belong to the supplying system, 660 or 670 depending on the voltage. MCC equipment linked to and limited to drilling systems should be connected to system 960-Rig Electric System, on platforms with separate power generation system for drilling operation.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

5

77

Total

236

Technical Object Numbering/Tag Numbering This section explains the structure and extent of tag numbering for ConocoPhillips Norway (COPNO) projects. Questions concerning this section should be directed to the System or Technical responsible persons (SA/TA) for further details http://northsea.conocophillips.net/ businesses/centers/ge/tagsag/index.htm.

5.1

Extent of Tagging

Note: All technical objects, which are assigned tag numbers, shall be registered in COPNO Asset Register.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

5.2

78

Total

236

SAP Asset Register / Functional Location Hierarchy / Structure COPNO utilizes SAP for managing technical objects. A summary of the Asset Register hierarchy is shown below.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

79

Total

236

5.2.1 SAP Asset Register / Functional Location Structure

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

80

Technical Object Numbering/Tag Numbering

5.3

Total

236

When to keep a Unit & Tag Number As a general rule new technical object with an existing Unit / Tag number shall use the original (existing) Unit / Tag number. Generating new function location unit/tag number shall be kept to a minimum. A structured disiplin is needed to make sure that the Asset register & Document module are updated according to the changes. This will reduce the number of document / drawing changes. Function remains the same(100 % identical (1-1), or not): The old (existing) Unit / Tag number shall not be changed, if the function remains the same (100 % identical (1-1), or not).

Example 1: Existing (Old) Tag information incl. Equipment number Tag number

Description

BD/EKOJ/30 22089 MOTOR FAN AIR OUTLET CHEM. CONTAINER

Old Equip Nbr.

Old Serial Nbr.

Material Master Nbr

10389253

123456

10511111

Example 1a: Update (New) Tag Information incl. Equipment number Tag number

Description

BD/EKOJ/30 22089 MOTOR FAN AIR OUTLET CHEM. CONTAINER

New Equip Nbr.

New Serial Nbr.

Material Master Nbr

10423787

65-4321

10511111or 10544444 See note

Example 2: Existing (Old) Tag information excl. Equipment number Tag number

Description

BD/EKOJ/30 22091 MOTOR VENTILATION OUTLET FAN 05 FA-27513

Old Equip Nbr.

Old Serial Nbr.

Material Master Nbr

NA

NA

10522222

Example 2a: Update (New) Unit / Tag Information exclude. Equipment number Tag number

Description

BD/EKOJ/30 22091 MOTOR VENTILATION OUTLET FAN 05 FA-27513

New Equip Nbr.

New Serial Nbr.

Material Master Nbr

NA

NA

10522222 or 10533333 See note

Note: The Material Master information can be identical (=identical Manufacturer). If not, new Material Master number is needed.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

81

Total

236

Identical technical object (= type, manufactor & model): When a replacement of an identical technical object (= type, manufactor & model), no documentation changes / update is needed. MCC: In cases when the whole MCC is replaced, and no change is done to the feeding Tag, the Unit / Tag number shall remain the same. Example 3 – Old MCC Unit number:

Description:

BD/EKOJ/670/28 00007

MCC 690V COMPRESSION

Tag Number:

Description:

BD/EKOJ/28 00007A-00A

30-22092 / 67 27525 LP GLYC CIRC PMP MOTOR

BD/EKOJ/28 00007A-00B

30-22094 / 67 27523 SOLVENT PMP MOTOR

BD/EKOJ/28 00007A-01A1

27 00035 HEATER, GI SYNT LUBE OIL RES

BD/EKOJ/28 00007A-01A2

SPARE

BD/EKOJ/28 00007A-02A1

27 00107A HEATER, ENCL TURB 84-00006A

BD/EKOJ/28 00007A-02A2

91-XV-23973 GAS EXPORT METERING STREAM

BD/EKOJ/28 00007A-03C

27 00007A HEATER,GAS LIFT COMP LUBE OIL

BD/EKOJ/28 00007A-03KM 30-00201A / 67-00201A PMP, PPL HYDRAULIC

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

82

Total

236

Example 3a : New MCC (replacing the old MCC) Unit number:

Description:

BD/EKOJ/670/28 00007

MCC 690V COMPPRESSION

Tag Number:

Description:

BD/EKOJ/28 00007A-00A

30-22092 / 67 27525 LP GLYC CIRC PMP MOTOR

BD/EKOJ/28 00007A-00B

30-22094 / 67 27523 SOLVENT PMP MOTOR

BD/EKOJ/28 00007A-01A1

27 00107A HEATER, ENCL TURB 84-00006A

BD/EKOJ/28 00007A-01A2

SPARE

BD/EKOJ/28 00007A-02A1

27 00107A HEATER, ENCL TURB 84-00006A

BD/EKOJ/28 00007A-02A2

91-XV-23973 GAS EXPORT METERING STREAM

BD/EKOJ/28 00007A-03C

27 00007A HEATER,GAS LIFT COMP LUBE OIL

BD/EKOJ/28 00007A-03KM 30-00201A / 67-00201A PMP, PPL HYDRAULIC Example 3b : New (larger) (MCC replacing the old MCC) Unit number:

Description:

BD/EKOJ/670/28 00007

MCC 690V COMPRESSION

Tag Number:

Description:

BD/EKOJ/28 00007A-00A

30-22092 / 67 27525 LP GLYC CIRC PMP MOTOR

BD/EKOJ/28 00007A-00B

30-22094 / 67 27523 SOLVENT PMP MOTOR

BD/EKOJ/28 00007A-01A1

27 00035 HEATER, GI SYNT LUBE OIL RES

BD/EKOJ/28 00007A-01A2

SPARE

BD/EKOJ/28 00007A-02A1

27 00107A HEATER, ENCL TURB 84-00006A

BD/EKOJ/28 00007A-02A2

91-XV-23973 GAS EXPORT METERING STREAM

BD/EKOJ/28 00007A-03C

27 00007A HEATER,GAS LIFT COMP LUBE OIL

BD/EKOJ/28 00007A-03KM 30-00201A / 67-00201A PMP, PPL HYDRAULIC BD/EKOJ/28 00007A-04A

FUTURE

BD/EKOJ/28 00007A-04B

FUTURE

Note: Underlying technical object will refer to existing MCC Tag number

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

83

Technical Object Numbering/Tag Numbering

Total

236

Can change to new Unit & Tag numbers: Cranes are the only Unit including several Tag numbers, that need completely new Unit & Tag numbers. Example 4: Existing (Old) Tag information Crane unit Old unit number

Description

Old Equip Nbr.

BD/EKOJ/840/19 00001A CRANE PEDESTAL, NA (SEATRAX), NORTH/WEST

Old Serial Nbr.

Material Master Nbr

NA

NA

BD/EKOJ/19 00001A

CRANE OVERH PEDESTAL, (SEATRAX), NORT/WEST

10245700 12345

10555555

BD/EKOJ/19 00009

WINCH BOOM 19-00001A CRANE 19 00001A

10245750 54678

10577777

BD/EKOJ/19 00015

HOOK WHIP 19-00001A CRANE 19 00001A

10245780 87952

10599999

New Equip Nbr.

Old Serial Nbr.

Material Master Nbr

BD/EKOJ/840/19 03000A CRANE PEDESTAL, (MOLDE), NORTH/WEST

NA

NA

NA

BD/EKOJ/19 03000A

CRANE OVERH PEDESTAL, (MOLDE), NORT/WEST

10345750 87654

10555555 or 10566666 See note below

BD/EKOJ/19 03001

WINCH BOOM CRANE 19 03000A

10345780 259278

10577777 or 10588888 See note below

BD/EKOJ/19 03002

HOOK WHIP CRANE 19 03000A

Example 4a: Update (new) Tag information Crane unit New unit number

Description

12345

10599999 or 10600001 See note below

Note: The Material Master information can be identical (=identical Manufacturer). If not, new Material Master number is needed. If Equipment number exists, it shall be replaced by a new Equipment number. If Equipment number does not exist, Material Master update needed. Documentation update needed in both cases.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

5.4

84

Total

236

Superior Functional Location As mentioned in 5.6 Category Codes on page 93 the functional location hierarchy requires all functional locations to have a superior functional location. The Superior functional location for a tag number is it’s unit number, for a unit number it’s a system number and so on. See example in 5.2 SAP Asset Register / Functional Location Hierarchy / Structure on page 78. In cases where the tag number is part of a skid or package the skid may be the superior functional location (Unit) for the tag and shall be given a unit number corresponding to skid’s primary tag number. Example 1: Compressor Package Tag number Functional Location

Description

Unit Number Superior Functional Location

BD/EKOJ/16 00010

COMPRESSOR

BD/EKOJ/260/16 00010

BD/EKOJ/63 00019

GEARBOX

BD/EKOJ/260/16 00010

BD/EKOJ/43 Various tags

INSTRUMENTS

BD/EKOJ/260/16 00010

BD/EKOJ/87 Various tags

VALVES MANUAL

BD/EKOJ/260/16 00010

BD/EKOJ/91 Various tags

VALVES AUTO

BD/EKOJ/260/16 00010

The examples above show tag numbers having a superior functional location (Unit) that is directly related to the overall operation/functionality of the package, (the compressor). The same philosophy is therefore employed when establishing unit numbers for other tagged items, even when they are not procured as a complete package unit. For example, vessels will always have directly related instrumentation. The vessel tag number will then form the basis for the unit number for the instrumentation and the vessel itself. The example below highlights some tag numbers on a separator and their superior functional location (unit number): Example 2: Separator Tag number

Description

Unit Number / Superior Functional Loc.

BD/EKOJ/95 00001

SEPARATOR

BD/EKOJ/110/95 00001

BD/EKOJ/87 Various tags

VALVES MANUAL

BD/EKOJ/110/95 00001

BD/EKOJ/43 Various tags

INSTRUMENTS

BD/EKOJ/110/95 00001

Important Notes The format of the unit number consist of Company Code/Facility/System/Unit Number, where unit number is equal to a tag number. Between category code and sequence number is a space, and structure indicator for Functional Locations above tag level is UKNO1 in SAP. Note from the examples above that the tag number and unit number for the "main" items are the same. Note that physical boundaries have no impact on the relationship between tag numbers and unit numbers. This is entirely related to operation and functionality.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

85

Total

236

Where a single skid or package unit contains parallel, main tagged items (e.g. three identical pumps), each one will be tagged separately and therefore each unit number will be separate. See example below: Example 3: Identical pumps mounted on one skid: Tag number

Description

Unit number / Superior Functional Loc.

BD/EKOJ/67 00001A

PUMP

BD/EKOJ/120/67 00001A

BD/EKOJ/30 00100A

MOTOR

BD/EKOJ/120/67 00001A

BD/EKOJ/43 PI-20250

IND PRESS

BD/EKOJ/120/67 00001A

BD/EKOJ/87 01621

VALVE MANUAL

BD/EKOJ/120/67 00001A

BD/EKOJ/87 01622

VALVE MANUAL

BD/EKOJ/120/67 00001A

BD/EKOJ/91 FV-00552

VALVE AUTO

BD/EKOJ/120/67 00001A

BD/EKOJ/67 00001B

PUMP

BD/EKOJ/120/67 00001B

BD/EKOJ/30 00100B

MOTOR

BD/EKOJ/120/67 00001B

BD/EKOJ/43 PI-20300

IND PRESS

BD/EKOJ/120/67 00001B

BD/EKOJ/87 01635

VALVE MANUAL

BD/EKOJ/120/67 00001B

BD/EKOJ/87 06136

VALVE MANUAL

BD/EKOJ/120/67 00001B

BD/EKOJ/91 FV-00562

VALVE AUTO

BD/EKOJ/120/67 00001B

BD/EKOJ/67 00001C

PUMP

BD/EKOJ/120/67 00001C

BD/EKOJ/30 00100C

MOTOR

BD/EKOJ/120/67 00001C

BD/EKOJ/43 PI-20350

IND PRESS

BD/EKOJ/120/67 00001C

BD/EKOJ/87 01645

VALVE MANUAL

BD/EKOJ/120/67 00001C

BD/EKOJ/87 01646

VALVE MANUAL

BD/EKOJ/120/67 00001C

BD/EKOJ/91 FV-00572

VALVE AUTO

BD/EKOJ/120/67 00001C

5.4.1 General Unit Numbers / “stand alone” Tagged Items Many tagged items do not relate specifically in a functional or operational sense to a unit. However, this is a mandatory field and therefore a general number is applied. Three general rules apply to the allocation of general unit numbers as shown below: 1. The tag number and unit number are the same except for objects that have an alpha prefix. These will loose the alpha prefix in the unit number. 2. The unit number is the panel tag number to which the tags are connected. Typical examples of tags which fall into this category of having no natural superior functional location (unit) are light fixtures. The emergency light fixtures for an entire platform might have tag numbers 27- 00015 to 27-01830. The unit number for all of these might then be BD/EKOJ/740/28 05005 which is the panel supplying power to the light fixtures. If there are more than one panel the tags shall be assigned to the panel they are supplied from. Normal light fixtures in system 670 would also be handled in this way.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

86

Total

236

3. Where a series of similar types of objects are used (i.e. detectors) and these do not have a dedicated control panel, the lowest numbered object tag number shall be used as basis for the unit number. System 730 unit numbers shall as a minimum be segregated as in the following examples where applicable: UNIT NUMBER BD/EKOJ/730/43 10001

UNIT DESCRIPTION DETECT GAS

TAG NUMBER BD/EKOJ/43 GDA1A-10001 BD/EKOJ/43 GDA1A-10002

TAG DESCRIPTION DETECT GAS NO 1 DETECT GAS NO 2

UNIT NUMBER BD/EKOJ/730/43 20001

UNIT DESCRIPTION DETECT SMOKE

TAG NUMBER BD/EKOJ/43 SDA1A-20001 BD/EKOJ/43 SDA1A-20002

TAG DESCRIPTION DETECT SMOKE NO 1 DETECT SMOKE NO 2

UNIT NUMBER BD/EKOJ/730/43 30001

UNIT DESCRIPTION DETECT HEAT

TAG NUMBER BD/EKOJ/43 HDA1A-30001 BD/EKOJ/43 HDA1A-30002

TAG DESCRIPTION DETECT HEAT NO 1 DETECT HEAT NO 2

UNIT NUMBER BD/EKOJ/730/43 40001

UNIT DESCRIPTION DETECT FLAME

TAG NUMBER BD/EKOJ/43 FDA1A-40001 BD/EKOJ/43 FDA1A-40002

TAG DESCRIPTION DETECT FLAME NO 1 DETECT FLAME NO 2

UNIT NUMBER BD/EKOJ/730/43 50001 BD/EKOJ/730/43 60001

UNIT DESCRIPTION FIRE & GAS FIELD TERM & JUNC BOXES FIRE & GAS CCR EQUIP & NODES

Note: If a dedicated control panel exist, this panel’s tag number shall be included under the unit number for its detectors. For gas detectors it is preferred that a unit number for each type of detectors is created. I.e. IR line detectors, IR point detectors, catalytic detectors and acoustic detectors.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

87

Total

236

5.4.2 General Unit Numbers for Telecommunication & Computer Systems (860, 870 & 880) The communication systems 860, 870, 880 on all platforms are utilizing a common system for Superior Functional Location Unit numbers, which originates from the old Maintenance Planning System. These Superior functional Location Unit numbers deviates from the standard way of allocating Unit numbers. For the 860 and 870 systems these unit numbers are generated in the 80-category, and normally sequence numbers start with” 80 5”, and the two last digits are the same for every platform. For the system 880 these unit numbers are generated in the 13-category, and normally sequence numbers start with “13 5, and the two last digits are the same for every platform. The existing range of unit numbers is shown in the tables below. Please contact the System/Technical (SA/TA) Responsible persons for these systems, before issuing new unit numbers, if additional unit numbers are required. Remember that the unit numbers listed below are used as main Reference Object Functional Locations for the Telecommunication Preventive Maintenance Program, and it is therefore, important that tag numbers are correctly linked against these units. Tag numbers belonging to the 860 and 870 systems will normally be allocated inn the 80-category, and tag numbers belonging to the 880 system will normally be allocated in the 13 category. They will utilize a prefix system as described in 5.11.13 Alpha Prefix Legend - Category 13 & 80 Communication (telecom) Equipment on page 162. However, since data communication and telecommunication systems are more and more integrated, tag numbers might have been allocated in either the 80 or 13 categories depending on traditional views of belonging. Therefore both 13 and 80 category tag-numbers within these tree systems might, when relevant, be linked to super functional unit numbers in the opposite category. Superior Functional Location Units for system 860, 870, 880: Unit number

Description

BD/XXXX/870/80 50007

AERONAUTICAL RADIO UNITS

BD/XXXX/880/13 54000

AUTOMATIC PERSONEL REGISTRATION UNITS

BD/XXXX/870/80 50022

BASE RADIO UNITS

BD/XXXX/870/80 50050

CLOSED CIRCUIT TELEVISION UNITS

BD/XXXX/870/80 50008

CRANE RADIO UNITS

BD/XXXX/870/80 50017

ENTERTAINMENT UNITS

BD/XXXX/870/80 50009

GLOBAL MARITIME DISTRESS SAFETY UNITS

BD/XXXX/870/80 50036

HELICOPTER INFORMATION UNITS

BD/XXXX/880/13 54010

LOCAL AREA NETWORK UNITS

BD/XXXX/870/80 50006

MARITIME LIFE BOAT RADIO UNITS

BD/XXXX/870/80 50005

MARITIME MF/HF RADIO UNITS

BD/XXXX/870/80 50041

MASTER CLOCKS & SYNCHRONIZATIONS UNIT

BD/XXXX/870/80 00000

MISCELLANEOUS COMMUNICATION UNITS

BD/XXXX/880/13 00000

MISCELLANEOUS COMPUTER UNITS

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

88

Technical Object Numbering/Tag Numbering

Total

236

Unit number

Description

BD/XXXX/860/80 50000

MULTIPLEXING UNITS

BD/XXXX/880/13 50050

OFFICE AND PERSONAL COMPUTER UNITS

BD/XXXX/870/80 50040

OFFSHORE DRILL/OPERATION CENTER COM UNITS

BD/XXXX/870/80 50033

OPTICAL FIBER UNITS

BD/XXXX/870/80 50003

PA & ALARM UNITS

BD/XXXX/870/80 50023

PORTABLE RADIO UNITS

BD/XXXX/870/80 50014

RADAR UNITS

BD/XXXX/860/80 50001

RADIO LINK UNITS

BD/XXXX/870/80 50013

RADIO-/RADAR BEACON UNITS

BD/XXXX/860/80 50003

SATELLITE LINK UNITS

BD/XXXX/870/80 50042

TELE & DATA COMMUNICATION OUTLETS

BD/XXXX/870/80 50035

TELE & DATA TEST INSTRUMENT UNITS

BD/XXXX/870/80 50002

TELEPHONE UNITS

BD/XXXX/870/80 50020

TV SATELLITE UNITS

BD/XXXX/870/80 50025

UPS FOR TELE & DATA UNITS

BD/XXXX/870/80 50038

VISIWEAR UNITS

BD/XXXX/880/13 54011

WIRELESS LAN UNITS

Note: Replace “xxxx” with the actual platform code. Helicopter Information Units BD/XXXX/870/80 50042, shall contain all functional location Tags related to service of helicopter flights like: •

Helicopter Flight Information Equipment

•

Weather Forecast Equipment

•

Directional Measuring Equipment

•

Automatic Terminal Information Equipment

•

Etc.

Tele & Data Communication Outlets BD/XXXX/870/80 50042, shall contain all funcational location Tags related to all communication equipments •

All Tele & Data Outlets , including Fibre Outlets, shall be given category 80.

•

All Tele & Data Outlets shall have IO as prefix code.

Optical Fiber Units BD/XXXX/870/80 50033, shall contain all Tele & Data Fibre related functional location Tag numbers, which shall all be tagged in category 80.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

5.5

89

Total

236

Tag Number Structure in SAP The Functional Location level tag in SAP consist of: Company code/Facility/Tag number. (Structure indicator for Functional Location tag level is always UKNO2 in SAP). There is always a space between the category code and the sequential number. Examples are as follows: BD/EKOJ/67 00068 BD/ELDA/43 TT-6886 BD/EKOJ/60 210-001

(system on EKOII installations and newer)*

BD/EKOK/60 5623

(system on EKOI installations)*

BD/EKOF/60 20-E-113

(system on EKOI, when vendor has allocated line number, typical)*

BD/EKOX/91 ESDV-00424 BD/EKOK/93 PSV-4214 •

For more detail concerning piping tag numbers see Equipment Category 60.

The tag number structure is a combination of either 2 (min.) or 3 (max.) data elements as described in the sections above. Exception to this principle is: •

MCC Cubicles in MCC panels have an extra alpha suffix - see 5.10 Category Descriptions and Tag Number Requirements on page 103 under category 28 (MCC/Switchboard Cubicle Numbering).

•

Piping for some vendor given line numbers.

In SAP both company code and facility code is registered in the same field and the structure are i.e.: Either Company/Plant/Category code + Sequential number (minimum) Or

Company/Plant/Category code + Alpha prefix + Sequential number(maximum)

Tag numbers shall be consistent in appearance on drawings/documents, nameplates and in the asset register. Note: The specification for tag nameplates and labels is covered in 5.14 Specification for Tag Nameplates & Labels on page 183. Extended SAP hierarchy / multi level units: Within some specific equipment/- category codes(75 (lifeboats) & 28 (panels)), it is mandatory to extend the SAP hierarchy to several levels to describe the different relations between the technical objects. It may be beneficial to extend the SAP hierarchy also for other type of equipment. In this case it must be clarified with the System / Technical responsible person/s. The examples below describe current requirements for extended SAP hierarchy.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

90

Total

236

Example 1 – Extended SAP hierarchy - lifeboat:

Example 2 – Extended SAP hierarchy – electrical equipment: SAP hierarchy

Level / comments

BD/EKOK/670

System level

BD/EKOK/670/28 02005

Unit level

BD/EKOK/28 02005

Tag level

BD/EKOK/28 02005-01

Tag level (Circuit nbr 1 in distribution panel 28-02005)

5.5.1 Tag Sequence Number In addition to the equipment category code, (and the secondary alpha prefix described in 5.7 Secondary Alpha Prefix on page 95 where applicable), all technical objects have a sequence number (new sequence number shall always contain 5 digits, old sequence number will vary, and can be up to 5 digits). For all categories except instruments, this sequence number is non-intelligent (see examples in 5.12 Example of Tag Syntax for Typical Equipment Categories on page 168). For instruments only (exept, see example 5.6 Category Codes on page 93, only wanted for new platforms), the sequence number for all instruments in one loop shall be the same. Because of this, it is permitted that an additional one character alpha suffix may be added in the event that there are two or more instruments with the same function prefix (i.e. secondary alpha prefix) in the same loop. See examples in 5.12 Example of Tag Syntax for Typical Equipment Categories on page 168.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

91

Total

236

Sequential numbers are allocated per platform, per category directly in SAP.

5.5.2 Tag Descriptions Tag descriptions consist of the following elements in the order shown below: 1. Type of object 2. Function/service 3. The object it service All tag descriptions in SAP shall be in English and in capital letters. Tag description field in SAP asset register contains 40 characters, use abbreviations listed in section 7 Abbreviations - Document/Drawing & Equipment Module on page 219 if adequate. When referencing a tag number that contains an alpha prefix, the category code may be omitted if place so requires, i.e. PT-01234. When referencing a tag number not containing a prefix the category code must always be included, i.e. 67 01234. Area code shall not be included in the tag description except for MCC cubicles and circuit breakers. In this case the Location field in SAP will identify the location of the MCC, hence it is useful to identify the area where the object being supplied is located. Use of ”Long text” field for long tag descriptions in SAP asset register is not acceptable, because information can not be listed in reports. See following examples: Tag Number

Tag Description

BD/EKOJ/67 00068

PUMP LUBE OIL RESERVOIR 95 00009

BD/ELDA/43 TT-6886

TRANSM TEMP SLURRY UNIT 67 5160

BD/EKOX/91 ESDV-00424

VALVE EMERGENCY SHUTDOWN PROD LINE NO 3

BD/EKOK/93 PSV-4214

VALVE PRESS RELIEF FILTER 35 4003

Note: Tag description in the PCSS system must be in accordance with the PCSS procedure.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

92

Total

236

5.5.3 Other General Information Before data transfer of tag numbers to the Asset Register, the unit numbers need to be pre-registered by the COPNO’s Asset Register Coordinator or the unit number must be located in the load file in front of all tag numbers that refer to this unit. For modification projects where object is removed or disconnected, the design contractor shall maintain a tag register, not only for new objects, but also for all objects which have been removed. This is to enable updating of the asset register on completion of the project. All objects scrapped in -situ will be labeled in accordance with procedure 2805 "Utstyr som settes permanent ut av drift."

5.5.4 Future tag Future tag shall be registered as any other function locations, but shall be marked with a specific status code (INAK/PLHO). See section 6.1 General on page 201 concerning drawing details.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

5.6

93

Total

236

Category Codes All unit- and tag numbers shall be prefixed by a two (2) digit equipment category code followed by a sequence number separated by a space. Some categories also require an alpha prefix in front of the sequence number. A full list of the valid codes appears in section 5.6.1 Valid Category Codes on page 94, and expanded descriptions of each of the categories appear in Section 5.10 Category Descriptions and Tag Number Requirements on page 103. It should be noted that COPNO does not recognize technical object "Packages" or "Skids” as equipment categories. They are always tagged and registered as a combination of individual equipment categories. For example: A compressor package would typically consist of various equipment categories: Category 16

-

Compressor

Category 60

-

Piping & Pipeline System

Category 63

-

Gearbox

Category 43

-

Various instruments

Category 84

-

Turbine

A pump would typically consist of various component categories and a operated valve would consist of component categories 91 and 43:

By using the same sequence number for different equipment categories it take a lot of administration time, therefore only preferred for new installations. See 5.5.1 Tag Sequence Number on page 90.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

94

Total

236

Note: Even though ”package” or ”skids are not registered as unique entities, it is required that individual tagged items are related to unit items for future maintenance planning purposes. However, this is achieved within a data base environment and is explained fully in section 5.2 SAP Asset Register / Functional Location Hierarchy / Structure on page 78.

5.6.1 Valid Category Codes All technical objects, which require tag numbers, shall be categorized according to the table below: Code

Description

01

Air-condition, Refrigeration Equipment

05

Fans, Blowers

06

Exhaust Stack

07

Steam and Gas Generating Equipment

10

Buildings and Equipment Containers

13

Computer Equipment

15

Household Equipment

16

Compressors, Vacuum Pumps

19

Lifting and Material Handling Equipment

20

Containers, Baskets

21

Lifts and Conveyor Equipment

24

Air-cooled Radiators and Coolers

25

Air Dryers

26

Cables incl. Umbilicals

27

Electrical Power Consuming Equipment

28

Electrical Power Distribution Equipment

29

Not in use

30

Electrical Motors

31

Power Generating/Transforming Equipment

32

Combustion Engines

34

Chemical Generators, Mixers

35

Filters, Strainers, Water makers

36

Furnaces

41

Heat Exchangers

43

Instruments

49

Laboratory-, Hospital Equipment

60

Piping, pipeline, risers and J-tube

61

Piping Specialties

63

Gearbox, Power Transmission Equipment

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

5.7

Code

Description

64

Offshore Platform Structures

65

Drilling Equipment

67

Pumps

75

Safety Equipment

77

Shop Equipment

80

Communication Equipment

84

Turbines

87

Hand-operated Valves

91

Automatic/Actuator-Operated Valves

93

Safety Relief Valves

95

Pressure Vessels, Storage Tanks

95

Total

236

Secondary Alpha Prefix Technical objects in category: 01, 05, 13, 26, 28, 43, 60, 80, 91,93, contain a secondary alpha prefix, which describes the technical objects' function or type within the category code. Examples of the tag numbering structure are shown in section 5.12 Example of Tag Syntax for Typical Equipment Categories on page 168 of this chapter. Valid alpha prefixes are referred to in the table below. a) Instruments (incl. ”soft tag”)

-

See table in 5.11.9 Alpha Prefix Legend Category 43 Instruments on page 148 and 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160

b) Instrument valves

-

See table in 5.11.8 Alpha Prefix Legend Category 43 Instrument Valves on page 147

c) Fire & Gas Detection Equipment

-

See table in 5.11.7 Alpha Prefix Legend Category 43 Fire & Gas Equipment on page 146

d) Junction Boxes (all disciplines)

-

See table in 5.11.6 Alpha Prefix Legend Junction Boxes - Category 13, 28, 43 & 80 Electrical/Instrument/Telecomm/F & G on page 146

e) Computer Equipment

-

See table in 5.11.3 Alpha Prefix Legend Category 13 Computer Equipment on page 145

f) Communication (telecom) equipment

-

See table in 5.11.13 Alpha Prefix Legend Category 13 & 80 Communication (telecom) Equipment on page 162

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

5.8

96

Total

236

g) HVAC Equipment

-

See table in 5.11.1 Alpha Prefix Legend Category 01 HVAC & Refrigeration Equipment on page 144 and 5.11.2 Alpha Prefix Legend - Category 05 Fans (blowers) on page 145

h) Panels (electrical/instrument)

-

See table in 5.11.5 Alpha Prefix Legend Category 28 & 43 Panels (Electrical & Instrument) on page 145

i) Valves (automatic/actuator operated)

-

See table in 5.11.14 Alpha Prefix Legend Category 91 Automatic/Actuator Operated Valves on page 165

j) Valves (safety relief valves)

-

See table in 5.11.15 Alpha Prefix Legend Category 93 Safety Relief Valves on page 166

k) Pipeline systems

-

See table in 5.11.11 Alpha Prefix Legend Category 60, Pipeline Systems (pig launchers/receivers, pipelines, risers & J-Tube) on page 162 and 5.11.12 Alpha Prefix Legend Category 60 Pipe Support / Penetration on page 162

Equipment Numbers Equipment numbers are automatically generated by SAP when the required fields at equipment level are filled in and saved, either manually or from a data load. The Equipment number is a non-intelligent sequential number. Equipment numbers remain assigned to the technical object (as part of the global asset register) throughout the technical object’s operational life. The equipment number is used to track a technical object's technical and economic history regardless of how many tag locations the object has been installed in. Where to use equipment number/functionality see matrix under each category (section 5.10 Category Descriptions and Tag Number Requirements on page 103 & 5.8.1 Equipment Numbers on page 98. Equipment number descriptions for objects where equipment functionality is used in SAP, special requirements apply to the equipment descriptions. This description level is between the tag level and the material master level of details. Equipment description should be more specific than the general tag description with regards to the type of equipment, but not as detailed as the material master description. Where a specific requirement has not been given, the general item description should be used. The below table 5.8.1 Equipment Numbers on page 98 outlines these requirements. Equipment number - Repairable technical objects: The use of generating equipment number can be either Repairable Technical Equipment sent onshore and back to stock or moved from one functional location to another functional location. These technical objects shall be permanently marked with its equipment number (when installed or earlier), either by engraving the number directly on the technical object or on a plate/sign firmly attached to the technical object.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

97

Total

236

Equipment number - Historical Technical objects: For technical objects repaired offshore or replaced with equal equipment, it is sufficient to register equipment number only in the Asset register (SAP) for history purpose, i.e document/ drawing links. In these cases there is no need to mark the technical object physically with its equipment number.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

98

Technical Object Numbering/Tag Numbering

Total

236

5.8.1 Equipment Numbers Cat.:

Object:

Description/ Explanation:

Example:

01

Compressor

Type of compressor

Compressor, reciprocating

06

Exhaust stack

NA

Exhaust stack

07

Generator

Type of generator

16

Compressor

Type of compressor/equipment

Vacuum pump

Type of pump

Lifting lug

NA

Lifting lug

Crane

Type of crane

Crane pedestal

Winch

Type of winch and size

Winch hydraulic, 2000 kg

Monorail

Type of monorail and size

Monorail electrical, 600 kg

Forklift

NA

Forklift

Hook

NA

Hook

Pulley block

NA

Pulley block

Basket

NA

Basket

Container

NA

Container

Shipping crate

NA

Shipping crate

Shipping rack

NA

Shipping rack

30

Motor

Specify EX class

Motor, electrical EEXd

31

Generator

Identify generator specifics

Generator, electrical, 660V, 2000A

32

Engine

Type of engine/fuel

Engine, diesel fuel

35

Centrifuge

Type of centrifuge

Centrifuge,…….

Cyclones

Type of cyclone

Cyclone, …….

19

20

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Compressor, screw

Approved 11.09.2006

Page no.

Title

99

Technical Object Numbering/Tag Numbering

Total

236

Cat.:

Object:

Description/ Explanation:

Example:

41

Cooler

Type of cooler

Cooler, plate

Heat exchanger

Type of heat exchanger

Heat exchanger, coil

Chiller

Type of chiller

Chiller, …….

Condenser

Type of condenser

Condenser, …….

Crossover

NA

Crossover

X-mas tree

NA

X-mas tree

Solid cross

NA

Solid cross

Starter head

NA

Starter head

Tubing bonnet

NA

Tubing bonnet

Unihead

NA

Unihead

Cylinder

NA

Cylinder, hydraulic

Motor

Type of motor

Motor, pneumatic

Gear box

NA

Gear box

Varidrive

NA

Varidrive

Elevator

NA

Elevator

Pipe handler

NA

Pipe handler

Slip

NA

Slip

Tong

NA

Tong

67

Pump

Type of pump

Pump, centrifugal

75

Mob boat

NA

Mob boat

Survival raft

NA

Survival raft

Personnel lift

NA

Personnel lift

84

Turbines

Type of turbine

Turbine, gas

87

Manual valve

Type of valve (gate, ball, globe etc.) For DBB valves, specify all three types

Valve, needle Valve, ball-needle-ball

91

Operated valves

Type of valve (gate, ball, globe etc.)

Valve, ball

61

63

65

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

100

Total

236

Cat.:

Object:

Description/ Explanation:

Example:

93

PSV

Type of PSV activation

PSV, pilot operated

95

Tank

Type of tank, size where relevant

Tank, storage, 1000l

5.8.2 Serial Numbers In general serial numbers shall be obtained for all types of equipment where a specific function test, pressure test, certification or similar test is performed on each individual tagged item and the test report is specified as part of the vendor final documentation. The manufacturer shall use his own serial number as the object test reference together with the tag number given by the design contractor or Company. This rule shall apply even if the matrix below does not specify that a serial number is required. Serial numbers shall be obtained for all equipment listed in the matrix specifying each individual tag category.

5.9

Technical Information The technical information is normally linked to the 4 different technical objects listed below. See also section 5.5 Tag Number Structure in SAP on page 89.

5.9.1 Functional Location Hierarchical representation of systems, units and tags on a facility.

5.9.2 Equipment Used to track items that may move from one location to another e.g. Pumps, Down-hole safety valves. Equipment is installed at tag level.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

101

Total

236

5.9.3 Material Master Contains link to technical data for material type ((Equipment) Material Master Number). All new equipment types shall be registered with Material Master number. Material Master Number is not necessary for the following item: •

Non-EX Junction Boxes

The Vendors data sheet will be required to register the material's technical characteristics. Alternative 1: Equipment functionality in use. Material Master number shall be registered in the equipment's construction type field in the equipment ’s construction type field in SAP.

Note: Equipment shall be linked to a material number via the Construction type field.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

102

Total

236

Alternative 2: Equipment functionality not in use. Material Master number shall be registered in the functional location's construction type field (tag level).

Note. The Material Master Number shall be linked to the lowest level in the Functional Location structure (tag). If a new Material Master number is needed, contact COPNO, Material Admin. & Warehouse department.

5.9.4 Linking Plant & Equipment Documentation to the Functional Location Hierarchy For further details regarding linking see document 4314 (Documentation for Operations (DFO)).

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

103

Technical Object Numbering/Tag Numbering

Total

236

5.10 Category Descriptions and Tag Number Requirements 01 HVAC AND REFRIGERATION EQUIPMENT This category covers permanently installed technical objects, which are integrated in HVAC and refrigeration equipment. For air condition, refrigeration units only: Object below shall be registered as a function location unit level in SAP asset register (Example; BD/ELDA/830/01 XXXXX): -

Air condition unit integrated in AHU (Air Handling Unit)

-

Air condition unit (split unit)

-

Refrigeration units for cooler/freezer room

-

Cooler/freeze container

-

Cool counter (with external cooler unit)

Tag number for air condition, refrigeration units shall be assigned to the following (category 01): Description

SAP Description

Equip.no. Serial no.

Cooler/freezer room

COOL ROOM FREEZ ROOM

N

N

Refrigeration compressor

COMPRESSOR (See note 1)

Y

Y

Note 1: The type of compressor shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98 . A list of items that shall be tagged appears in 5.11.1 Alpha Prefix Legend - Category 01 HVAC & Refrigeration Equipment on page 144 See 5.14.6 Labeling of HVAC Ductwork on page 199 for more details. Related technical object tagged under other Categories is as shown below: -

Fans refrigeration

(Category 05 FR)

-

Refrigeration evaporator

(Category 24)

-

Compressor motor

(Category 30)

-

Chiller evaporator

(Category 41)

-

Filter Dryer

(Category 35)

-

Evaporator filter

(Category 35)

-

Condenser water cooled

(Category 41)

-

Refrigeration condenser (air cooled)

(Category 24)

-

Instruments

(Category 43)

-

Water valve

(Category 91 PSV)

-

Hot gas bypass valve

(Category 91 PSV)

-

Thermo valve

(Category 91 TCV)

-

Safety valve/Rupture disk

(Category 93 PSV)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

104

Technical Object Numbering/Tag Numbering

-

Tank (refrigeration medium receiver)

Total

236

(Category 95)

For HVAC units only: Objects below must be registered as a unit in SAP asset register (Example: BD/ELDA/830/01 XXXXX): -

All HVAC plant must be registered in SAP with one unit number each.

Tag number for HVAC units shall be assigned to the following (category 01): Description

SAP Description

Equip.no.

Serial no.

Balancing damper

DAMPER BALANCING

N

N

Fire damper

DAMPER FIRE

N

Y

Pressure control damper

DAMPER PRESSURE CONTROL

N

N

Shut off & control damper mechanical DAMPER SHUT OFF & CONTROL

N

N

Louver

LOUVER

N

N

Coalescer filter

FILTER COALESCER

N

N

Measuring device

MEASURING DEVICE

N

N

Non-return damper manual

DAMPER MANUAL NON-RETURN

N

N

Sound attenuator

ATTENUATOR SOUND

N

N

Grills & defusers (terminal unit)

GRILLS & DIFFUSERS

N

N

Water cooling coil

COIL WATER COOLING

N

N

Water heating coil

COIL WATER HEATING

N

N

Ventilation hood

HOOD VENTILATION

N

N

A list of items that shall be tagged appears in Section 5.11.1 Alpha Prefix Legend - Category 01 HVAC & Refrigeration Equipment on page 144 Related technical object tagged under other Categories is as shown below: -

Fans supply extract

(Category 05)

-

Heater

(Category 27)

-

Panel / switch/junction box

(Category 28)

-

Motor

(Category 30)

-

Filter HVAC

(Category 35)

-

Instruments

(Category 43)

-

Valves

(Category 91)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

105

Technical Object Numbering/Tag Numbering

Total

236

05 FANS (BLOWERS) This category covers all types of fans (blowers) used to circulate/transport air or other gases. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Fans (blowers)

FAN

N

N

A list of items to be tagged is shown in section 5.11.2 Alpha Prefix Legend - Category 05 Fans (blowers) on page 145.

06 EXHAUST STACK This category covers all exhaust systems used for diesel/gas engines and turbines. Exhaust Stack is defined from downstream turbine exhaust collector/diesel engine exhaust manifold (excl. turbo chargers) to air and shall be tagged as one unit. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Exhaust stack

STACK EXHAUST

Y

N

The following elements are included in Exhaust Stack Units and shall not be separately tagged: -

Bellows

-

Silencers

-

Ducting

-

Structures

-

Supports

-

Hatches

-

Flanges.

Related technical object tagged under other Categories is as shown below: -

Evaporators

(Category 35)

-

Heat Exhangers incl. Waste Heat Recovery Unit (WHRU)

(Category 41)

-

Instruments

(Category 43)

-

Piping

(Category 60)

-

Manifold heat exhanger

(Category 61)

-

Valves

(Category 91)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

106

Total

236

07 STEAM AND GAS GENERATING EQUIPMENT This category covers technical object used for generating steam and gases, e.g. nitrogen. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Nitrogen generators

GENERATOR NITROGEN

Y

Y

Y

Y

Steam generators (incl. burner) GENERATOR STEAM (see note 1)

Note 1: The type of generator shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98. Related technical object tagged under other Categories is as shown below: -

High pressure cleaners and smoke generators

(Category 77)

10 PERMANENT BUILDINGS AND EQUIPMENT CONTAINERS The category covers all types and parts of enclosed buildings and equipment containers (not open skids or temporary containers). Exception: Buildings that form a natural part of another structure. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Fire doors

DOOR FIRE + “fire class”

N

Y

Doors

DOOR

N

N

Fire walls

WALL FIRE

N

N

Fire class shall be included in the description field when registered in the asset register. Example: Tag number:

Description:

BD/ELDA/10 5057

DOOR FIRE A0 MAIN POWER GEN MOD3 S W

Note: Technical object mounted inside buildings/containers is covered by its own respective categories.

13 COMPUTER EQUIPMENT A full list of Computer Equipment, which requires tagging, is shown in section 5.11.3 Alpha Prefix Legend - Category 13 Computer Equipment on page 145 and junction boxes for computer equipment in section 5.11.6 Alpha Prefix Legend - Junction Boxes - Category 13, 28, 43 & 80 - Electrical/Instrument/Telecomm/F & G on page 146. Sensors/probes for computerized process control, measurement and condition monitoring equipment are tagged under Category 43 - Instruments.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

107

Technical Object Numbering/Tag Numbering

Total

236

15 HOUSEHOLD EQUIPMENT This category covers all types of household equipment. Electric motors for this type of technical object is not tagged separately. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no. Serial no.

Ovens

OVEN

N

N

Dishwashers

DISHWASHER

N

N

Peelers

PELLER

N

N

Tumbledryers (household)

TUMBLE DRIER

N

N

Washing machines

MACHINE WASHING

N

N

Hot water tanks (household)

TANK HOT WATER

N

Y

16 COMPRESSORS, VACUUM PUMPS This category covers all types of stationary compressors and air/gas vacuum pumps. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no. Serial no.

Air/gas vacuum pumps

PUMP VACUUM (see note 1)

Y

Y

Ejectors

EJECTOR

Y

Y

Axial flow compressors

COMPRESSOR (see note 1)

Y

Y

Centrifugal compressors

COMPRESSOR (see note 1)

Y

Y

Gas expander (expansion turbine) EXCPANDER GAS

Y

Y

Reciprocating compressors

COMPRESSOR (see note 1)

Y

Y

Rotary compressors (screw, sliding vane and liquid piston (water ring))

COMPRESSOR (see note 1)

Y

Y

Note 1: The type of compressor & pump shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98. Related technical object tagged under other Categories is as shown below: -

Transportable compressors

(Category 77)

Note: For Tag, numbering under this Category in a "Package" context refers to section 5.4 Superior Functional Location on page 84

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

108

Total

236

19 LIFTING AND MATERIAL HANDLING EQUIPMENT This category covers all types of technical object used for lifting/transport of equipment and other types of goods. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no. Serial no.

Crane Master

CRANE MASTER

Y

Y

Davit

DAVIT

Y

Y

Pedestal cranes (see notes below)

CRANE PEDESTAL

Y

Y

Forklift

FORKLIFT

Y

Y

Hoist

HOIST

Y

Y

Hook

HOOK

Y

Y

Monorail w/trolley

MONORAIL

Y

Y

Overhead crane

CRANE OVERHEAD

Y

Y

Padeyes/ lifting lug

PADEYE LIFTING LUG

Y Y

Y Y

Pulley-block

PULLEY-BLOCK

Y

Y

Winch

WINCH

Y

Y

Note1 : The type of equipment shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98. Note: Additional clarification follows to enable correct categorization of deck crane components: -

A-frame

(Category 19)

-

Auto/Actu opervalves

(Category 91)

-

Boom

(Category 19)

-

Brake

(Category 19)

-

Diesel engine

(Category 32)

-

Electrical equipment

(Category 27/28/30/31)

-

Gear

(Category 63)

-

Revolving frame

(Category 19)

-

Hook (whip)

(Category 19)

-

Hydraulic motor

(Category 63)

-

Hydraulic pump

(Category 67)

-

Hydraulic valves

(Category 43)

-

Instruments

(Category 43)

-

Pulley block (main)

(Category 19)

-

Safety valves

(Category 93)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

109

Technical Object Numbering/Tag Numbering

-

Tanks

(Category 95)

-

Winch

(Category 19)

Total

236

Note: For Tag numbering under this Category in a "Package" context, refer to section 5.4 Superior Functional Location on page 84.

20 GOODS CONTAINER, BASKETS This category covers all mechanical technical objects concerning transport of goods between platforms and Onshore - Offshore. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Baskets

BASKET

Y

N

Containers

CONTAINER

Y

N

Shipping crates

CRATE

Y

N

Shipping racks (pipe, bottles etc.)

RACK

Y

N

Related technical object tagged under other Categories are as shown below: -

Personnel and work baskets (Category 75)

21 LIFTS AND CONVEYOR EQUIPMENT This category covers all mechanical technical objects in lifts and conveyor belts used for transport of personnel and goods. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Conveyors

CONVEYOR

N

N

Goods elevators

ELEVATOR GOODS

N

N

Man lifts

LIFT PERSONNEL

N

N

Personnel elevators

ELEVATOR PERSONNEL

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

110

Technical Object Numbering/Tag Numbering

Total

236

24 AIR-COOLED RADIATORS AND COOLERS This category covers all cooling technical objects where air is used as the cooling medium. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Air cool coil

COIL COOL AIR

N

N

Air cooled cooler

COOLER AIR COOLED

N

N

Air cooled radiator

RADIATOR AIR COOLED

N

N

Refrigeration condenser (air cooled)

CONDENSER

N

N

Refrigeration evaporator (DX)

EVAPORATOR

N

N

25 AIR DRYERS This category covers all types air dryers. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Air dryers (towers)

DRYER AIR

N

N

Note: For Tag, numbering under this Category in a "Package" context refers to section 5.4 Superior Functional Location on page 84. Related technical object tagged under other Categories are as shown below: -

Electrical heating in air driers

(Category 27)

26 CABLES (incl. Umbilicals) This category covers all type of cables including Umbilicals. Tag numbers shall be assigned to the following: Description

SAP Description

Cable

FROM:

Umbilical

UMBILICAL

TO:

Equip.no.

Serial no.

N

N

N

N

All cable & Umbilical functional location numbers are linked to system number "CAB" and the superior functional location (unit) number: 26 00001.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

Cable Unit Number:

Description:

BD/EKOJ/CAB/26 00001

CABLES

Cable Tag Number:

Description:

BD/EKOJ/26 C40050

FROM: 43 FD-00013 TO: 43 JCZ-41175

BD/EKOJ/26 P40063

FROM: 43 FT-00562 TO: 43 JCE-41985

BD/EKOJ/26 T49010

FROM: 80 LE-00010 TO: 80 JTE-49111

111

Total

236

Cable length shall be added in SAP description field ("Long text")for each functional location cable and material master number shall indicate cable type.

Cable Numbers NOT Registered in SAP - General Cable numbers on "old platforms" not registered in SAP will be shown on a manual drawing called "Cable schedule" (sub type “EF”). The cable number for these platforms are either composed of a single alfa code and a sequential numbers, see example 1: If a functional location tag need a “object link” to an old cable on a cable schedule, register the old cable information as a cable tag in SAP. If the cable numbers from the cable schedule are to be registered in SAP, the cable number information on the "cable schedule” will be replaced with the following note: "Cable information registered in SAP". The "new cable number" will then contain category 26 and the "old cable number", see example 2.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

112

Technical Object Numbering/Tag Numbering

Total

236

Example 1: Cables NOT registered in SAP: Cable Number - Cable Schedule: C-9107, P3712A, T9464 Or only by sequential number 6769

Example 2: Register Cables from “Cable Schedule” in SAP Cable Tag Number:

Description:

BD/EKOC/26 C-9107

FROM: 01 CO-5124 TO: 01 RU-5123

BD/ELDA/26 P3712A

FROM: 29 5252 TO: 27 5007C

BD/EKOC/26 T9464

FROM: 43 CP-04080 TO: 13 DF-05145

BD/EKOC/26 6769

FROM: 28 5005 TO: 43 CP-7142

Object link (FL Master): Cables/Umbilicals shall be registered in SAP as an object link(SAP function). Object link number(cable function location tag number) identifying the link between two technical objects (function locations).

Example 1: Object link cable/Umbilical and technical object: Link from Func. Loc..:

Link to Func. Loc..:

Link object:

BD/EKOJ/28 00155

BD/EKOJ/27 00380

BD/EKOJ/26 P3017

BD/EKOM/43 LCP-01611

BD/EKOM/91 ESDV-01611

BD/EKOM/26 U14614

A list of valid prefix codes is listed in section 5.11.4 Alpha Prefix Legend - Category 26 Cables (incl. Umbilicals) on page 145. Related technical object tagged under other Categories is as shown below: -

Heat tracing cable

Document / Revision No. 2169 / 09

(Category 27)

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

113

Technical Object Numbering/Tag Numbering

Total

236

27 ELECTRIC POWER CONSUMING EQUIPMENT This category covers all stationary electrical power consuming equipment except industrial standard light fixtures used for normal lights and industrial standard junction boxes used only for the extension of cables, etc. All electrical consumers supplied by a voltage >48V shall have a reference to it’s supplying MCC cubicle or circuit number in the distribution panel, both in SAP functional location description and on the physical tag plate, ref 5.14 Specification for Tag Nameplates & Labels on page 183. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Electrical heating elements

HEATER ELEMENT HEATER PANELl

N

N

Lighting fixtures

FIXTURE LIGHT NORMAL FIXTURE LIGHT EMERGENCY FLOODLIGHT NORMAL FLOODLIGHT EMERGENCY

N

N

Heat tracing cable

CABLE

N

N

Other power consuming equipment, e.g. motor still-stand heaters

AS REQUIRED

N

N

Object link (FL Master) – Heat trace: Heat trace cable tag number (Function Location) shall be registered in SAP as an object link. Object link number (cable function location number) identifying the link between two technical objects (Function Locations).

Example 1: Object link heat trace and technical object: Object link number (heat trace function location number) identifying the line number and the heat trace panel number (junction box). Link from Func. Loc.

Link to Func. Loc

Link object:

BD/EKOJ/28 JE-50750

BD/EKOJ/60 530-143

BD/EKOJ/27 80463

Tag numbers labeling for equipment inside living quarter may be simplified with regard to length of text, material and size of tag label and fastening. Details shall be agreed upon with the responsible tag engineer.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

114

Technical Object Numbering/Tag Numbering

Total

236

28 ELECTRIC POWER DISTRIBUTION EQUIPMENT This category covers all types of power distribution equipment. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no. Serial no.

Breakers/Battery breakers (independent) not mounted in panels/MCC)

BREAKER BREAKER BATTERY

N

N

Control panels

PANEL CONTROL

N

N

Distribution panels

PANEL DISTRIBUTION

N

N

Switches

SWITCH

N

N

Socket Outlets

SOCKET OUTLET

N

N

Earthing resistors etc.

RESISTOR EARTHING

N

N

High & low voltage panels

PANEL DISTRIBUTION

N

N

Junction boxes for electrical power

BOX JUNCTION

N

N

MCC starter cubicles

CUBICLE MCC

N

N

Motor control center (MCC)

MOTOR CONTROL CENTER N

N

Switchboards

SWITCHBOARD

N

N

A list of items, which require tagging, is shown in section 5.11.5 Alpha Prefix Legend - Category 28 & 43 Panels (Electrical & Instrument) on page 145, 5.11.6 Alpha Prefix Legend - Junction Boxes - Category 13, 28, 43 & 80 - Electrical/Instrument/ Telecomm/F & G on page 146 , see tables below - "MCC/Switchboard Cubicle Numbering", "Numbering of Distribution Panel Circuits (230 V)", "Hierarchical Structure of Electrical Systems in SAP".

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

115

Total

236

MCC/Switchboard Cubicle Numbering MCCs and switchboards will receive tag numbers as complete units under Category 28 Electrical power distribution equipment. However, the individual sections and cubicles of MCCs and switchboards require separate identification. This shall be via the addition of suffix identifier's to the main tag number as shown below. MCC/switchboard sections are numbered 1, 2, 3, etc from left to right. MCC/switchboard cubicles are numbered A, B, C, etc. from top to bottom. A typical cubicle would be numbered 28 00201-2B indicating that the cubicle is in MCC/switchboard section "2", row "B." Typical MCC/switchboard Tag number 28 00201: CUBICLE 28 00201-02A

CUBICLE 28 00201-03A

CUBICLE 28 00201-01B

CUBICLE 28 00201-02B

CUBICLE 28 00201-03BD

CUBICLE 28 00201-01CD

CUBICLE 28 00201-02C

CUBICLE 28 00201-01A DETAILS OF THE ITEM(S) WHICH THE CUBICLE IS SERVING (inc. Tag No. jf applicable) SHALL BE DETAILED ON PLATE.

CUBICLE 28 00201-02D1

CUBICLE 28 00201-02D2

Note: Available/spare MCC cubicle is dedicated to minor jobs. If a need in a project or similar, new section shall be ordered instead of using “Spare”.

Numbering of Distribution Panel Circuits (230 V) Example: How to numbering distribution panel circuits

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

116

Total

236

Hierarchical Structure of Electrical Systems in SAP

Figure5.10-1- Example of platform electrical system.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

117

Technical Object Numbering/Tag Numbering

Total

236

29 NOT TO BE USED This category is no longer in use. The tag numbers already existing in this category are ”old” tag numbers.

30 ELECTRICAL MOTORS This category covers all electrical motors, including motors with an integrated gear and motors operating valve actuators. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Electrical motors

MOTOR MOTOR ACTUATOR

YN Y

YN N

31 POWER GENERATING/TRANSFORMING EQUIPMENT This category covers all power producing and power transforming equipment. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Battery (bank)

BANK BATTERY

N

N

Battery charger

CHARGER BATTERY

N

N

Generator

GENERATOR

Y

Y

Inverter

INVERTER

N

N

Rectifier

RECTIFIER

N

N

Solar cells

SOLAR CELL

N

N

Transformer

TRANSFORMER

N

N

Wind generator

GENERATOR WIND

Y

Y

Note 1: The type of generator shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98 (Equipment Numbers).

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

118

Technical Object Numbering/Tag Numbering

Total

236

32 COMBUSTION ENGINES This category covers all types of combustion engines. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Diesel fuel engines

ENGINE DIESEL

Y

Y

Gas fuel engines

ENGINE GAS

Y

Y

Gasoline fuel engines

ENGINE GASOLINE

Y

Y

Note 1: The type of engine shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98.

34 CHEMICAL GENERATORS AND MIXERS This category covers technical object used for generating chemicals (electrolysis). It also covers mixers. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Chlorinator

CHLORINATOR

N

N

Mixer (incl. Agitation equipment)

MIXER

N

N

Note: For Tag numbering under this Category in a "Package" context, refer to section 5.4 Superior Functional Location on page 84.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

119

Technical Object Numbering/Tag Numbering

Total

236

35 FILTERS, STRAINERS AND WATER MAKERS This category covers all technical object that by mechanical or chemical means (not electrolytic) separates one substance from another (except production/test separators). Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Centrifuges

CENTRIFUGE

Y

N

Cyclones

CYCLONE

Y

N

Destillators

DESTILLATOR

N

N

Evaporators

EVAPORATOR

N

N

Extractors

EXTRACTOR

N

N

Filter Housing

FILTER

N

N

Separators (production/test separators excl - see below)

SEPARATOR

N

N

Skimmers

SKIMMER

N

N

Strainers

STRAINER

N

N

UV- sterilizer cells

UV STERILIZER

N

N

Water makers

WATER MAKER

N

N

Note 1: The type of centrifuges and cyclones shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98. Related technical object tagged under other Categories is as shown below: -

Production/test separators

(Category 95)

36 FURNACES This category covers all furnaces used for heating. Furnaces are defined as being complete units, including heating battery, boiler tube bundles and flow control valves. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Air heaters

HEATER AIR

N

N

Oil heaters

HEATER OIL

N

N

Water heaters

HEATER WATER

N

N

Related technical object tagged under other Categories is as shown below: -

Steam generation boilers

(Category 07)

Note: For Tag numbering under this Category in a "Package" context, refer to Section 5.4 Superior Functional Location on page 84.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

120

Technical Object Numbering/Tag Numbering

Total

236

41 HEAT EXCHANGERS AND COOLERS This category covers all heat exchangers and coolers except those, which use air as a cooling medium. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Chiller

CHILLER

Y

Y

Cooler, coil

COOLER

Y

Y

Cooler, double pipe

COOLER

Y

Y

Cooler, plate

COOLER

Y

Y

Cooler, printed circuit

COOLER

Y

Y

Cooler, shell/tube

COOLER

Y

Y

Heat exchanger, coil

EXHANGER HEAT

Y

Y

Heat exchanger, double pipe

EXHANGER HEAT

Y

Y

Heat exchanger, plate

EXHANGER HEAT

Y

Y

Heat exchanger, printed circuit

EXHANGER HEAT

Y

Y

Heat exchanger, shell/tube

EXHANGER HEAT

Y

Y

Refrigeration chiller (evaporator)

CHILLER REFRIGERATION

Y

Y

Refrigeration condenser Water cooled

CONDENSER REFRIGERATION Y

Y

Note 1: The type of equipment shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98. A heat exchanger performs a double function. It transfers heat from one medium to another, at the same time as the hot medium is cooled down. A cooler cools down a liquid or gas by means of water as a cooling medium. A chiller is a type of technical object that is able to cool down to a temperature lower than if water was used as a cooling medium.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

121

Technical Object Numbering/Tag Numbering

Total

236

43 INSTRUMENTS Generally, all instrument types shall be tagged, also portable gas detectors. This also includes instruments, which are part of packages. Local indicators, (with sensors) on packages shall only be tagged if they are connected to the hydrocarbon systems, are important to the operational performance or if they fail to function will have consequences for operational performance, health, environment or safety. Function location (tag) number structure for instrument see section 5.5.1 Tag Sequence Number on page 90, 5.12 Example of Tag Syntax for Typical Equipment Categories on page 168. Replacing an existing instrument: If replacing an existing instrument (digital) with a new instrument(digital) no change in function location(tag) needed. When replacing an existing instrument(digital) with a new instrument (analog) the function location (tag) numbering shall be as follows in example. Example – Replacing PSL / PSH with a new pressure transmitter(PT): BD/EKOB/43 PSL-5902 BD/EKOB/43 PSH-5902 The new pressure transmitter shall be tagged as follows: BD/EKOB/43 PT-5902 Description

SAP Description

Equip.no.

Serial no.

Pressure Transmitter

TRANSMITTER PRESSURE

N

N

Pressure switch low

SWITCH PRESSURE LOW

N

N

Pressure switch high

SWITCH PRESSURE HIGH

N

N

If loop drawing FDSB-02-IL-05902 exists, this drawing shall be updated. If loop drawing doesn’t exist, new drawing to be made. See section 6.2.2 Document/Drawing Number for Existing Facilities on page 205, 6.3 Drawing Number Exceptions on page 205, 6.3.1 Instrument on page 205.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

122

Total

236

Fire & Gas shall be numbered as follows: Fire and gas detection equipment shall contain fire area in tag number, see following examples: Example 1 – Detector linked to analog input in F&G node: Detector Tag number:

Description:

BD/EKOJ/43 GDC1K-28225

DETECT GAS FIRE PUMP B ENCLOUSURE NODE: 15

BD

=

Company code (= Norway)

EKOC

=

Facility Code

43

=

Equipment category

GD

=

Alpha prefix Code (GD = Gas Detector, see section 5.11.7 Alpha Prefix Legend - Category 43 Fire & Gas Equipment on page 146)

C1K

=

Fire area

28225

=

Sequence number

(CXX = Module Support Frame, UXX = Utility Module, SXX = Separation Module, PXX = Process Module)

Note: If new fire area number is needed, contact COPNO, Technical Safety Department. Detectors being linked to the old central (Sieger FS-16) shall use the channel number as sequence number. Example 2: - Detector linked to old central (Sieger FS-16): Alternative 1 – Channel number included in function location (tag) description: Detector Tag number:

Description:

BD/EKOB/43 GDBAA-11875

DETECT GAS F07 COMB. AIR INLET CRANE 19

Alternative 1 is preferable before alternative 2 for easier converting to new F&G node in future no need for changing function location (tag) number.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

123

Total

236

Alternative 2 – Channel number included in function location (tag) number: Detectors being linked to the old central (Seger FS-16) shall use channel number as sequence number. Detector Tag number:

Description:

BD/ELDA/43 GDAAB-B02

DETECT GAS IR POINT AIR INTAKE CRANE 1

BD

=

Company code (= Norway)

ELDA

=

Facility Code

43

=

Equipment category

GD

=

Alpha prefix Code (GD = Gas Detector, see section 5.11.7 Alpha Prefix Legend - Category 43 Fire & Gas Equipment on page 146)

AAB

=

Fire area (AXX = Platform ELDA, XAX = Fire protection level A (ref. dwg. No FDSD-25-14), XBX = Fire protection level B, XXB = Sequence number)

B-02

=

Sequence number (= channel number)

A full list of instrument types, which shall be tagged, appears in Section 5.11.9 Alpha Prefix Legend - Category 43 Instruments on page 148, 5.11.8 Alpha Prefix Legend - Category 43 Instrument Valves on page 147, 5.11.7 Alpha Prefix Legend - Category 43 Fire & Gas Equipment on page 146, 5.11.5 Alpha Prefix Legend - Category 28 & 43 Panels (Electrical & Instrument) on page 145 and section 5.11.6 Alpha Prefix Legend - Junction Boxes - Category 13, 28, 43 & 80 - Electrical/Instrument/Telecomm/F & G on page 146.

Signals GENERAL All signals shall be registered under system “BD/SIG” and a unit number in category 43. Eks: BD/EKOM/SIG/43 00001 (No prefix code!). For additional signals on existing platforms, use the actual platforms unit number and signal structure. Example – Signals general hierarchy - all platforms: Signal System Nbr:

Description:

BD/****/SIG

SIGNALS

Signal Unit Nbr:

Description:

BD/****/SIG/43 XXXXX

SIGNALS

**** = platform code (e.g. EKOJ, EKOK, EKOM, ELDA…..)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

124

Total

236

Object link (FL Master): Signals shall be registered in SAP as an object link(SAP function). Object link number(signal tag function location number) identifying the link between two technical objects (function locations). PCDA signals: see 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160. PCDA signals shall be numbered as follows: Signal Tag number:

SAP Description:

BD/EKOM/43 XS-00001F

SIGNAL F&G (description as required)

BD/EKOM/43 XS-00001E

SIGNAL ESD (description as required)

BD/EKOM/43 XS-00001P

SIGNAL PSD (description as required)

BD/EKOM/43 00001

SIGNAL PCDA (description as required)

Signal elements (feeder, motor/heater), ref. section 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160. Signal Tag number:

Description:

BD/****/43 XS-00001E

Signal ESD stop motor 30 12345

BD

=

Company code (= Norway)

****

=

Facility Code

43

=

Equipment category

XS

=

Alpha prefix Code (see section 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160) Switch ( XA = alarm, XI = Status/information)

00001

=

Sequence number

E

=

Suffix Code (E, P, F or none) (see section 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

125

Total

236

Internode signal PCSS/SAS shall be numbered as follows: Internode Signal Tag number SAP Description: BD/EKOJ/43 15-32-82195O

INTERNODE SIGNAL FROM FIRE & GAS TO ESD

BD/EKOJ/43 15-32-82195I

INTERNODE SIGNAL FROM FIRE & GAS TO ESD

BD

=

Company code (= Norway)

EKOJ

=

Facility Code

43

=

Equipment Category

15

=

Node from

32

=

Node to

82195

=

Unique Sequence number

O

=

Output or (I = Input) (see section 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160)

IMPORTANT NOTE: Signals emerging from physical, individually tagged objects/components shall NOT be registered in SAP. The physical object itself is registered in SAP and the signal will be the same as this tag number. All documentation regarding the signal (Instrument loop diagram / SCD) shall be linked to this functional location tag number. Signals for NEW facilities: The below listed types of signals shall be registered in SAP as individual tag numbers. In general, the combination of sequence number and suffix letter is unique. Individual signals: •

Internode signals

•

ESD signals (suffix E, ref. 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160)

•

PSD signals (suffix P, ref. 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160)

•

F&G signals (suffix F, ref. 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160)

•

Signals appearing on a P&ID, shown as tag numbers, shall be registered in SAP. (In SAP this will appear as a regular tag number, but it shall be located under the unit number for signals and described as a signal).

Other signals: •

PCDA signals other than the ESD, PSD and F&G shall be registered in SAP with a common tag number for each sequence number, excluding both the suffix and the prefix.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

126

Total

236

Example: BD/EKOM/43 XS-12345A shall be registered as BD/EKOM/43 12345 and will be common for all signals with this sequence number (except suffix E, P & F). •

The signal sequence number excluding the suffix letter shall be same for all signals run to/from one functional location (MCC cubicle).

•

·In special cases it may be required to feed more than one signal of the same type to and from the exact same location (tag number). In these cases the signals will receive the same prefix, suffix and sequence number and shall be identified by adding a hyphen and a two digit consecutive number behind the suffix. Parallel signals shall be identified in SAP for suffixes E, P and F only.

Examples: Signal Tag number:

Description:

BD/EKOM/43 XS-03978F-01

SIGNAL F&G EL. ISOL UPS A OFFICE MODULE

BD/EKOM/43 XS-03978F-02

SIGNAL F&G ISOL UPS A UTILITY ST US-033-W30

BD/EKOM/43 XS-03978F-03

SIGNAL F&G EL. ISOL UPS A CIRCUIT NO.3

Object link (FL Master): Each signal or group of signals’ start and end point shall be identified by using “Object link” functionality in SAP. For a PCDA signal the object link shall identify the tag number from which the signal is sent and the tag number where it is received. The actual MCC cubicle tag number shall be identified where applicable. For internode signals, the object link shall identify the physical start and end point of the cable carrying the signal. This implies that it is the signal’s field termination cabinet (13 DF-*****) that shall be used in one or both ends as the object link’s to/from fields as applicable. NOTE: As pr. rev. 9 of this document there is no facility built where SAP asset register fully complies with the above requirements. Consult the project representative or COPNO Plant and Equipment information department whenever in doubt. Signals on EXISTING facilities: General Registration of signals in SAP shall follow the already established platform standard with respect to which signals to be registered and how they are registered. SAP can not be regarded as a trusted source with regards to signal sequence numbers since they are not all registered. Since the control system on any facility can only handle unique signals it is imperative that duplicated sequence numbers are avoided. The complete signal list for any project must therefore be sent to the Control Systems Technical Responsible for the actual facility or to the COPNO project representative. He will have the list verified against the control system database.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

127

Technical Object Numbering/Tag Numbering

Total

236

Object link (FL Master): Each signal or group of signals’ start and end point shall be identified by using “Object link” functionality in SAP. For a PCDA signal the object link shall identify the tag number from which the signal is sent and the tag number where it is received. The actual MCC cubicle tag number shall be identified where applicable. For internode signals, the object link shall identify the physical start and end point of the signal.

Example 1 - Signals general - Object Link: Link from Func. Loc:

Link to Func. Loc:

Link object:

BD/*****/XX XXXXX

BD/*****/XX XXXXX

BD/*****/XX XXXXX

From

To:

Link:

Where the signals starts where the signals ends /is going Signal tag nbr (initiating object) (receiving object) e.g. tag or node/system cabinet e.g. tag or node/system cabinet

Example 2 - Signals - EKOJ – Unit / Signal Tag Nbr: Signal Unit number:

Description:

BD/EKOJ/SIG/43 00001

SIGNALS SAS (PCSS)

Signal Tag number:

Description:

BD/EKOJ/31 00017-05855E

SIGNAL ESD MCC 28-00001B-H05

BD/EKOJ/31 00017-05855P

SIGNAL PSD MCC 28-00001B-H05

BD/EKOJ/31 00017-05855

SIGNAL PCDA MCC 28-00001B-H05

Signals for ESD, PSD and F&G shall be registered in SAP with a suffix code, PCDA shall be registered with the sequence number only (without the prefix code), see examples above.

Example 2a - Signals EKOJ - Object link: Link from Func. Loc:

Link to Func. Loc:

Link object:

BD/EKOJ/13 ER-00650A

BD/EKOJ/28 00001B-FH02

BD/EKOJ/31 00017-05855E

BD/EKOJ/13 ER-00754

BD/EKOJ/28 00001B-FH02

BD/EKOJ/31 00017-05855P

BD/EKOJ/13 ER-00661

BD/EKOJ/28 00001B-H05

BD/EKOJ/31 00017-05855

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

128

Total

236

Example 2b – Signal Elements - EKOJ: Signal Tag number:

Description:

BD/EKOJ/31 00017-05855

SIGNAL PCDA MCC 28-00001B-H05

BD

= Company code (= Norway)

EKOJ

= Facility Code

31

= Equipment category

00017

= sequence number trafo

05855

= sequence number for signal tag

E

= ESD, see prefix codes sec. 5.11.10 Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals on page 160.

Example 3 – Signals EKOX – Unit / Signal Tag Nbr: Signal Unit number:

Description:

BD/EKOX/SIG/43 00001

SIGNALS SAS (PCSS)

Signal Tag number:

Description:

BD/EKOX/43 XS-00151E

SIGNAL ESD 28 00001-4L

BD/EKOX/43 XS-00151P

SIGNAL PSD 28 00001-4L

BD/EKOX/43 XS-00151

SIGNAL PCDA 28 00001-4L

Example 3a - Signals EKOX - Object Link: Link from Func. Loc:

Link to Func. Loc:

Link object:

BD/EKOX/13 ER-00117A

BD/EKOX/28 00001-4L

BD/EKOX/43 XS-00151E

BD/EKOX/13 ER-00112

BD/EKOX/28 00001-4L

BD/EKOX/43 XS-00151P

BD/EKOX/13 ER-00105A

BD/EKOX/28 00001-4L

BD/EKOX/43 XS-00151

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

129

Total

236

Example 4 – Signals ELDA – Unit / Signal Tag Nbr: Signal Unit number:

Description:

BD/ELDA/SIG/43 00001

SIGNALS SAS (PCSS)

Signal Tag number:

Description:

BD/ELDA/43 XS-30248F

SIGNAL SD HEATER 27 06622

Example 4a – Signals ELDA - Object Link: Link from Func. Loc.

Link to Func. Loc.

Link object:

BD/ELDA/XX XXXXX

BD/ELDA/27 06622

BD/ELDA/43 XS-30248F

Example 5 – Signals EKOM - Unit / Signal Tag Nbr: Signal Unit number:

Description:

BD/EKOM/SIG/43 00001

SIGNALS SAS (PCSS)

Signal Tag number:

Description:

BD/EKOM/43 XS-03977E

SIGNAL ESD SD BATTERY BREAKER UPS A

BD/EKOM/43 XS-20058P

SIGNAL PSD SD LUBE OIL HEATER COMPR A

BD/EKOM/43 XS-03975F

SIGNAL F&G EL. ISOL LIGHT & SMALL POWER

Example 5a – Signals EKOM - Object Link: Link from Func. Loc.

Link to Func. Loc.

Link object:

BD/EKOM/13 DF 0001B

BD/EKOM/28 00014

BD/EKOM/43 XS-03977E

BD/EKOM/13 DF 00016

BD/EKOM/28 00008

BD/EKOM/43 XS-20058P

BD/EKOM/13 DF-00002C

BD/EKOM/28 00006

BD/EKOM/43 XS-03975F

49 LABORATORY, HOSPITAL EQUIPMENT The category covers all types of technical object used for laboratory and medical tests/samples.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

130

Technical Object Numbering/Tag Numbering

Total

236

60 PIPING, PIPELINE SYSTEMS (incl. Penetration & J-Tube) This category covers all piping and pipeline systems. Piping (incl. Penetration): All piping shall be assigned "line" numbers in accordance with 5.13 Piping Line Numbering on page 171. For the purpose of identifying piping lines in the SAP asset register, the follow tag number structure shall be used. This tag number structure is only for the purpose of registering in the SAP asset register and is NOT to be confused with the conventional piping line number. The complete conventional line number will be included in the asset register as Function location description.

Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Process piping

PIPING

N

N

Utility piping

PIPING

N

N

Pipe supports

PIPE SUPPORT

N

N

Penetration

PENETRATION

N

N

Manifold (header)

MANIFOLD

N

N

Object link (FL Master): Line numbers shall be registered in SAP with an object link (SAP function). Object link number(line number tag) identifying the link between two technical objects (function locations).

Example 1: Object link - Line number – Technical Object known Link from Func. Loc.

Link to Func. Loc.

Link object:

BD/ELDE/95 00001

BD/ELDE/60 210-004

BD/ELDE/60 590-0001

BD/ELDE/60 210-001

BD/ELDE/60 590-001

BD/ELDE/60 210-004

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

131

Total

236

Example 2: Object link - Line number - Technical Object unknown: Link from Func. Loc.

Link to Func. Loc.

Link object:

BD/EKOM/43 LG-00117

BD/EKOM/60 ATMOSPHERE

BD/ELDE/60 110-097

In some cases one of the technical objects in the ”Object link” can be “unknown” (no “normal” tag number is adequate/possible to establish). When this occurs, the following codes shall be used : Tag number

Description

BD/XXXX/60 ATMOSPHERE

PIPING ENDS, TO ATMOSPHERE

BD/XXXX/60 BLIND FLANGE

PIPING ENDS, TO BLIND FLANGE

BD/XXXX/60 CONNECTION

PIPING ENDS, TO CONNECTIONS (VAR. TYPES)

BD/XXXX/60 DELUGE NOZZLES

PIPING ENDS, TO DELUGE NOZZELS

BD/XXXX/60 DRAIN

PIPING ENDS, TO DRAIN (VARIOUS TYPES)

BD/XXXX/60 JACKET

PIPING ENDS, TO JACKET STRUCTURE

BD/XXXX/60 OVERBOARD

PIPING ENDS, TO SEA/OVERBRD (VAR. TYPES)

BD/XXXX/60 TOILET

PIPING ENDS, TO TOILETS AND WASHBASINS

The above codes shall be kept to a minimum, and if it at a later point is possible/adequate to establish a “normal” functional location tag number, this shall be done. Procedure for Document / Drawing link, shall be as for “normal” functional location tag numbers. If a need for other codes then the above mentioned, this must be clarified with Plant & Equipment Information department.

Example 1 - Piping:

EKOII (EKOX, EKOJ, ELDE, EKOM and all newer platforms)

Tag number:

Description:

BD/EKOJ/60 210-001

LINE: 210-001-BC10-36-PT-0

BD

= Company code (= Norway)

EKOJ

= Facillity Code

60

= Equipment category

210

= System number (Gas Process Compression)

001

= Sequence number

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

132

Total

236

Example 2 - Piping: EKOI (All installations with the exception of those in Example 1, using COPNO line numbering) Tag number:

Description:

BD/EKOK/60 5623

LINE: 5623-AG70-18"

BD

= Company code (= Norway)

EKOJ

= Facility Code

60

= Equipment category

5623

= Sequence number

Example 3 - Piping: EKOI (For vendor allocated line numbers, the entire line number shall be used as the sequence number) * Tag number:

Description:

BD/EKOF/60 20-E-113

LINE: 20-E-113

BD

= Company code (= Norway)

EKOF

= Facility Code

60

= Equipment category

20-E-113

= Sequence number

* The P&ID should utilize the same line number as the ISO drawing. If NOT the P&ID must be revised to reflect the same line number as the ISO drawing.

Example 4 - Flowlines (different numbering systems have been used on each platform. The variant on the respective platform must be used with new additional sequence numbers)

Example 5 – Pipe Support Pipe Support shall be linked to system 850 and the one specific Superior Function Location (unit) number for the actual platform. See section: 5.11.12 Alpha Prefix Legend - Category 60 Pipe Support / Penetration on page 162 for details. The definition of pipe support is everything having a function as a pipe support Example: Unit number:

Description:

BD/ELDA/850/60 06061

PIPE SUPPORT

Tag number:

Description:

BD/ELDA/60 PS-06062

PIPE SUPPORT DETAIL + ”line number” (see note 1)

BD/ELDA/60 PS-06063

PIPE SUPPORT DETAIL MULTI (see note 2)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

133

Total

236

Note 1: Standard description if one line number. Note 2: Standard description if more than one line number. Use of SAP function “Object Link” is needed. Penetration shall be linked to system 850 and the one specific Superior Function Location (unit) number for the actual platform. See section: 5.11.11 Alpha Prefix Legend - Category 60, Pipeline Systems (pig launchers/receivers, pipelines, risers & J-Tube) on page 162 for details.

Example 6 – Penetration: Unit number:

Description:

BD/EKOJ/850/60 XXXXX

PENETRATION

Tag number:

Description:

BD/EKOJ/60 PP-XXXXX

PENETRATION DETAIL

Pipeline Systems (incl. J-Tube): Pipeline systems covers all technical objects forming part of pipeline system. Objects below shall be registered as a unit number in SAP asset register: -

Pipeline System (from pig launcher to pig receiver)

If a new unit Pipeline System & J-Tube number is needed, contact COPNO, Mechanical Integrity

Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Sphere or barred tees

BARRED TEE

N

N

Pig launchers

PIG LAUNCHER

N

Y

Pig receivers

PIG RECEIVER

N

N

Pipelines

PIPELINE

N

N

Risers

RISER

N

N

J-Tube

J-TUBE

N

N

A list of items to be tagged is shown in section 5.11.11 Alpha Prefix Legend - Category 60, Pipeline Systems (pig launchers/receivers, pipelines, risers & J-Tube) on page 162.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

134

Total

236

Example 1 - Pipelines: Unit number:

Description:

BD/EKOJ/410/60 2027

PIPELINE 34” TEESIDE

Tag number:

Description:

BD/EKOJ/60 R2027J

RISER OUTLET 34" TEESSIDE OIL PIPELINE

BD/EKOJ/60 P2027

PIPELINE 34" TEESSIDE OLD PART FROM KP 5

BD/EKOJ/60 P2027N

PIPELINE 34" TEESSIDE NEW EKOII SECTION

Example 2 - Riser: Tag number:

Description:

BD/EKOJ/60 R2027J

RISER OUTLET 34" TEESSIDE OIL PIPELINE

BD

= Company code (= Norway)

EKOJ

= Facility Code

60

= Equipment category

R

= Alpha Prefix Code (R = Riser, see section 5.11.11 Alpha Prefix Legend - Category 60, Pipeline Systems (pig launchers/receivers, pipelines, risers & J-Tube) on page 162)

2027

=Sequence number Pipeline (to be assigned by COPNO Mechanical Integrity)

J

=Suffix Code (Facility, J=EKOJ)

Example 3 - Pipeline: Tag number:

Description:

BD/EKOJ/60 P2027N

PIPELINE 34" TEESSIDE NEW EKOII SECTION

BD

= Company code (= Norway)

EKOJ

= Facility Code

60

= Equipment category

P

= Alpha Prefix Code (P = Pipeline, see section 5.11.11 Alpha Prefix Legend - Category 60, Pipeline Systems (pig launchers/receivers, pipelines, risers & J-Tube) on page 162)

2027

= Sequence number Pipeline (to be assigned by COPNO Mechanical Integrity).

N

=Suffix Code; Pipeline section identification A – section A B – section B C – section C N – EkoII Section - blank (standard value) (leave blank if only one section)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

135

Total

236

Example 4 - J-Tube: Tag number:

Description:

BD/EKOJ/60 J3027J

J-TUBE TEESIDE

BD

= Company code (= Norway)

EKOJ

= Facility Code

60

= Equipment category

J

= Alpha Prefix Code (J = J-Tube, see section 5.11.11 Alpha Prefix Legend - Category 60, Pipeline Systems (pig launchers/receivers, pipelines, risers & J-Tube) on page 162)

3027

= Sequence number J-Tube (to be assigned by COPNO Mechanical Integrity)

J

Suffix Code (Facility; J= EKOJ)

If a new pipeline functional location (tag) number is needed, contact COPNO, Mechanical Integrity.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

136

Technical Object Numbering/Tag Numbering

Total

236

61 PIPING SPECIALITIES This category covers special technical object used in all piping. The category also covers also special pipe equipment used for well installations.

Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Anode

ANODE

N

N

Annulus / Annulus Tubing

ANNULUS ANNULUS TUBING

Y Y

N N

Crossovers

CROSSOVER

Y

N

Flare tip

FLARE TIP

N

N

Flexible Hose

HOSE FLEXIBLE

N

N

Gas trap

GAS TRAP

N

N

Hose reel diesel

HOSE REEL DIESEL

N

N

Injection Quille (complete assembly)

INJECTION QUILLE

N

N

Production/injection well (starter head)

PRODUCTION WELL INJECTION WELL

Y Y

N N

Tree Cap

TREE CAP

Y

N

Tubing Bonnet

TUBING BONNET

Y

N

Uniheads

UNIHEADS

Y

N

X-mas tree (solid cross)

X-MAS TREE

Y

N

Other technical object shall be registered in their relevant category. Example: -

Manual valve

(Category 87)

-

Strainer

(Category 35)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

137

Total

236

63 GEARBOX, POWER TRANSMISSION EQUIPMENT This category covers all types of mechanical power transmission. The category also covers hydraulic motors and cylinders. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Hydraulic power cylinder

CYLINDER HYDRAULIC

Y

N

Hydraulic motor

MOTOR HYDRAULIC

Y

N

Pneumatic motor

MOTOR PNEUMATIC

Y

N

Reduction gearbox

GEARBOX

Y

N

Varidrive

VARIDRIVE

Y

N

64 OFFSHORE PLATFORM STRUCTURES These category covers constructions used for offshore platforms and platform structures. Structures of this type are assigned with a facility code and area numbers rather than a Tag number - see 2 Facility/Area Code on page 8.

65 DRILLING EQUIPMENT This category covers special drilling equipment that does not fit in to any other categories. Example: Description

SAP Description

Equip.no.

Serial no.

Elevators

ELEVATORS

Y

N

Pipe handling in general

PIPE

Y

N

Slips

SLIPS

Y

N

Tongs

TONGS

Y

N

Note: Pumps and electrical technical objects shall be tagged in their relevant categories. X-mas tree (solid cross) shall be tagged in category 61.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

138

Total

236

67 PUMPS This category covers all types of pumps. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Centrifugal pumps

PUMP (see note below)

Y

Y

Diaphragm pumps

PUMP (see note below)

Y

N

Gear pumps

PUMP (see note below)

Y

Y

Hand pumps

PUMP (see note below)

Y

N

Liquid vacuum pumps

PUMP (see note below)

Y

N

Reciprocating pumps

PUMP (see note below)

Y

Y

Screw pumps

PUMP (see note below)

Y

Y

Note: 1. The type of pump shall be included in the equipment description, see 5.8 Equipment Numbers on page 96 2. For Tag, numbering under this Category in a "Package" context refers to section 5.4 Superior Functional Location on page 84.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

139

Technical Object Numbering/Tag Numbering

Total

236

75 SAFETY EQUIPMENT This category covers all types of technical object concerning safety related systems (fire fighting, evacuation, protection of personnel etc.). Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Escape chutes/hose

ESCAPE CHUTE ESCAPE HOSE

N

N

Cabinet for fall protection equipment

CABINET FALL PROTECTION N

N

Deluge, sprinkler & foam skids

SKID DELUGE SKID SPRINKLER SKID FOAM

N N N

N N N

Fire extinguishers

EXTINGUISHER FIRE

N

N

Firewater hose reels

HOSE REEL FIRE

N

N

Firewater hydrants

HYDRANT FIRE

N

Y

Firewater monitors

MONITOR FIRE

N

Y

Lifeboats

LIFEBOAT

Y

Y

Life rafts

LIFERAFT

N

N

MOB boats

MOB BOAT

Y

Y

Navigational aid control panel

PANEL CONTROL NAV AID

N

N

Navigational aid station

STATION NAV AID

N

N

N

N

Oil protection equipment Personnel baskets

BASKET PERSONNEL

N

N

Rope ladders

LADDER ROPE

N

N

Transportable foam units

FOAM UNIT TRANSPORTABLE

N

N

Work baskets

BASKET WORK

N

N

Safety Shower

SHOWER SAFETY

N

N

Eyewash bottles station

CABINET EYEWASH BOTTLES

N

N

Torch

TORCH

N

N

Survival Suits Cabinet

CABINET SURVIVAL SUITS

N

N

Lifejacket cabinet

CABINET LIFEJACKET

N

N

Life buoy cabinet

CABINET LIFE BOUY

N

N

Smoke hood cabinet

CABINET SMOKE HOOD

N

N

Eye bath self contained

EYE BATH

N

N

Insulated crab hooks

CRAB HOOK

N

N

Stretchers

STRETCHER

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

140

Technical Object Numbering/Tag Numbering

Total

236

Description

SAP Description

Equip.no.

Serial no.

First aid kit

FIRST AID KIT

N

N

Chemical protective clothing cabinet

CABINET CHEMICAL PROTECTIVE CLOTHING

N

N

Related technical object tagged under other Categories is as shown below: -

Fire & Gas detection equipment

(Category 43)

-

Fire pumps

(Category 67)

Note: For Tag, numbering under this Category in a "Package" context refers to section 5.4 Superior Functional Location on page 84.

77 SHOP / PORTABLE EQUIPMENT This category covers all types of technical object normally used/stored in mechanical, electrical, instrument and welding workshops as well as portable technical object. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no. Serial no.

Cold saws

SAW

N

N

Grinders

GRINDER

N

N

Hydraulic lifting equipment

LIFTING EQUIPMENT HYDRAULIC

N

N

Hydraulic press

PRESS HYDRAULIC

N

N

Lathes

LATCH

N

N

Milling machines

MACHINE MILLING

N

N

Pedestal drilling machines

MACHINE DRILLING

N

N

Portable compressors

COMPRESSOR PORTABLE

N

N

Portable high pressure cleaners

CLEANER HIGH PRES- N SURE PORTABLE

N

Smoke generators

GENERATOR SMOKE

N

N

Test units (PSV-valves)

UNIT TEST

N

N

Washing machines – for tools, parts etc

MACHINE WASHING

N

N

Welding rod cabinets

CABINET WELDING ROD

N

N

Welding machines

MACHINE WELDING

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

141

Technical Object Numbering/Tag Numbering

Total

236

80 COMMUNICATION (TELECOM) EQUIPMENT This category covers all types of communication equipment. A full list of all the relevant technical object types, which require to be tagged, appear in Section 5.11.13 Alpha Prefix Legend - Category 13 & 80 Communication (telecom) Equipment on page 162 and Section 5.11.6 Alpha Prefix Legend - Junction Boxes - Category 13, 28, 43 & 80 - Electrical/Instrument/Telecomm/F & G on page 146. GPS antenna shall be tagged as 80 RA, the GPS as 80 RX . Related technical object tagged under other Categories is as shown below: -

GPS PC

(Category 13)

Note! Tag number for e.g radio/CD player incl. loudspeaker shall not be tagged.

84 TURBINES This category covers all types of turbines. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Gas turbines

TURBINE GAS (see note 1)

Y

Y

Steam turbines

TURBINE STEAM (see note 1)

Y

Y

Note 1: The type of turbine shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98. Note 2: If the gearbox is an integral part of the turbine it is not separately tagged. However, if the gearbox is a separate unit it shall be tagged under Category 63.

87 MANUALLY OPERATED VALVES Manual Valves with ND 2" and above shall always have a functional location assigned. Manual Valves with ND below 2" shall normally not have a functional location assigned, unless the valve is classified as critical for operation or safety integrity. Description

SAP Description

Equip.no.

Serial no.

Ball valves

VALVE MANUAL

Y

Y

Butterfly valves

VALVE MANUAL

Y

Y

Check valves

VALVE MANUAL

Y

Y

Diaphram valves

VALVE MANUAL

Y

Y

Gate valves

VALVE MANUAL

Y

Y

Globe valves

VALVE MANUAL

Y

Y

Modular valves

VALVE MANUAL

Y

Y

Plug valves

VALVE MANUAL

Y

Y

Note 1: The type of valve shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

142

Technical Object Numbering/Tag Numbering

Total

236

91 AUTOMATIC/ACTUATOR-OPERATED VALVES Automatic/actuated valves, which require tag numbers, appear in section 5.11.14 Alpha Prefix Legend - Category 91 Automatic/Actuator Operated Valves on page 165. Steam trap shall be assigned to this category (91 TCV-). Description

SAP Description

Equip.no .

Serial no.

Automatic /Actuator operated valves VALVE (See 5.11.14 Alpha Prefix Legend - Category 91 Automatic/Actuator Operated Valves on page 165)

Y

Y

Steam Trap

N

N

STEAM TRAP

Note: 1. Hydraulic and pneumatic actuators shall not be assigned a separate tag number from the valve. 2. Electric motor operated actuators shall be tagged in category 30. 3. Solenoid valves are covered by category 43. 4. The type of valve shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98.

93 SAFETY RELIEF VALVES This category covers all types of valves, which automatically protect technical object against unacceptable pressure/vacuum. A list of items to be tagged is shown in 5.11.15 Alpha Prefix Legend - Category 93 Safety Relief Valves on page 166. All safety relief valves shall be assigned with a Tag number. Types of safety relief valve are: Description

SAP Description

Equip.no. Serial no.

Pilot-operated valve

VALVE PRESSURE SAFETY Y

Y

Spring-operated valve

VALVE PRESSURE SAFETY Y

Y

Weight-operated valve

VALVE PRESSURE SAFETY Y

Y

Note 1: The type of valve shall be included in the equipment description, see 5.8.1 Equipment Numbers on page 98.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Total

143

Technical Object Numbering/Tag Numbering

236

95 PRESSURE VESSELS, STORAGE TANKS This category covers all types of pressure vessels and storage tanks, which do not form part of other technical object packages. All pressurized tanks shall be given the description “Vessel pressure” except for hydraulic accumulators. All atmospheric tanks shall be given the description “Tank atmospheric”. Tag numbers shall be assigned to the following: Description

SAP Description

Equip.no.

Serial no.

Degassing tanks

TANK ATMOSPHERIC DEGAS- Y SING

Y

Gas/liquid scrubbers

SCRUBBER

Y

Y

Glycol contactors

CONTACTOR GLYCOL

Y

Y

Glycol regenerators

REGENERATOR GLYCOL

Y

Y

Hydraulic accumulators

ACCUMULATOR HYDRAULIC

Y

Y

Gas container bottles (pressure vessel)

VESSEL PRESSURE + “media” Y (E.g..: Vessel pressure N2)

Y

Production/test separators

SEPARATOR

Y

Y

Storage tanks

TANK ATMOSPHERIC

Y

Y

Vacuum deaerators

DEAERATOR

Y

Y

Hot water tanks (process related only, see cat. 15)

VESSEL PRESSURE HOT WA- Y TER

Y

Note: 1. In general, all pressurized vessels shall start the description as “VESSEL PRESSURE”. 2. In general, all atmospheric tanks shall start the description as “TANK ATMOSPHERIC”. 3. The type of tank shall be included in the equipment description, see 5.8 Equipment Numbers on page 96. 4. For Tag, numbering under this Category in a "Package" context refers to Section 5.4 Superior Functional Location on page 84.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

144

Technical Object Numbering/Tag Numbering

Total

236

5.11 Secondary Alpha Prefix - Valid Codes Codes are further described in Sections 5.4 Superior Functional Location on page 84, 5.5 Tag Number Structure in SAP on page 89 and 5.6 Category Codes on page 93. Full details appear below:

5.11.1 Alpha Prefix Legend - Category 01 HVAC & Refrigeration Equipment Prefix

Description

SAP Description

Equip.no Serial no. .

AH

AIR HANDLING UNIT (HVAC)

UNIT AIR HANDLING

N

Y

BD

BALANCING DAMPER MANUAL (HVAC)

DAMPER BALANCING

N

N

FC

FILTER COALESCER

COALECHER FILTER (SJEKK)

N

N

FD

FIRE DAMPER (HVAC)

DAMPER FIRE

N

Y

LO

LOUVER (HVAC)

LOUVRE

N

N

MD

MEASURING DEVICE (HVAC)

DEVICE MEASURING

N

N

NR

NON-RETURN DAMPER MANUAL (HVAC)

DAMPER NON-RETURN

N

N

PCD

PRESSURE CONTROL DAMPER (HVAC overpressure)

DAMPER PRESURE CONTROL

N

N

RU

REFRIGERATION UNIT (refrigeration)

UNIT REFRIGERATION

N

N

SA

SOUND ATTENUATOR (HVAC) ATTENUATOR SOUND

N

N

SD

SHUT OFF & CONTROL DAMPER MECHANICAL (HVAC)

DAMPER SHUT OFF DAMPER CONTROL

N N

N N

TU

GRILLS & DEFUSORS (terminal unit) (HVAC)

GRILL DEFUSOR

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

145

Technical Object Numbering/Tag Numbering

Total

236

5.11.2 Alpha Prefix Legend - Category 05 Fans (blowers) Prefix

Description

SAP Description

Equip.no.

Serial no.

FA

FAN VENTILATION

FAN

N

N

FR

FAN REFIGERATION UNIT (condenser / evaporator)

FAN

N

N

5.11.3 Alpha Prefix Legend - Category 13 Computer Equipment See section 5.11.13 Alpha Prefix Legend - Category 13 & 80 Communication (telecom) Equipment on page 162

5.11.4 Alpha Prefix Legend - Category 26 Cables (incl. Umbilicals) Prefix

Description

SAP Description

Equip.no.

Serial no.

C

CONTROL & SAFETY CABLE (see note 1 below)

FROM:

TO:

N

N

P

POWER

FROM:

TO:

S

SAFETY / EMERGENCY SHUT DOWN (see note 2 below)

FROM:

TO:

N

N

T

TELECOM

FROM:

TO:

N

N

U

UMBILICALS

FROM:

TO:

N

N

X

SPECIAL CABLES

FROM:

TO:

N

N

Note 1: Ekofisk Complex: Prefix code C shall be used for PCDA on Ekofisk Complex PCSS. Note 2: Ekofisk Complex: Prefix code “S” shall be used for ESD, F&G & PSD on Ekofisk Complex PCSS. Eldfisk Installations: Prefix code "S" shall not be used on Eldfisk installations.

5.11.5 Alpha Prefix Legend - Category 28 & 43 Panels (Electrical & Instrument) Prefix

Description

SAP Description

Equip.no.

Serial no.

CP

CONTROL PANEL

PANEL CONTROL

N

N

LCP

LOCAL CONTROL PANEL (see note)

PANEL LOCAL CONTROL

N

N

Note: LCP will normally control a field device and be located nearby the technical objects.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

146

Technical Object Numbering/Tag Numbering

Total

236

5.11.6 Alpha Prefix Legend - Junction Boxes - Category 13, 28, 43 & 80 - Electrical/Instrument/Telecomm/F & G Alpha prefix legend - Junction Boxes (Ex & Non Ex) - Category 28 & 43: Prefix

Description

SAP Description

Equip.no.

Serial no.

JB

JUNCTION BOX (Electro/ Instrument)

BOX JUNCTION

N

N

Alpha prefix legend - Junction Boxes – Non EX - Category 13 & 80: Prefix

Description

SAP Description

Equip.no.

Serial no.

JB

JUNCTION BOX, NON-EX (Telecomm/computer)

BOX JUNCTION

N

N

Alpha prefix legend - Junction Boxes – EX - Category 13 & 80: Prefix

Description

SAP Description

Equip.no.

Serial no.

JE

JUNCTION BOX, EX (Telecomm/computer)

BOX JUNCTION

N

N

5.11.7 Alpha Prefix Legend - Category 43 Fire & Gas Equipment Prefix

Description

SAP Description

CB

CO2 PREDISCHARGE BEACON

BEACON CO2 PRE- N DISCHARGE

N

CD

CO2 RELEASE UNIT

UNIT CO2 RELEASE

N

N

CL

CO2 STATUS LIGHT

LIGHT CO2 STATUS N

N

CS

CO2 PREDISCHARGE SOUNDER

ALARM CO2 PREDISCHARGE

N

N

DY

ADDRESSABLE INTERFACE UNIT

UNIT INTERFACE ADDRESSABLE

N

N

ERB

EMERGENCY RELEASE BUTTON (for all emergency release except CO2)

BUTTON EMERGENCY RELEAS

N

N

FAB

FIRE ALARM BUTTON

BUTTON FIRE ALARM

N

N

FD

FLAME DETECTOR

DETECTOR FLAME

N

N

GD

GAS DETECTOR

DETECTOR GAS

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Equip.no.

Serial no.

Approved 11.09.2006

Page no.

Title

147

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

GDR

GAS DETECTOR REFLECTOR (same sequence number as for the detector. For Line detectors with separate transmitter and receiver use R (Receiver) and T (Transmitter) as suffix)

REFLECTOR GAS DETECTOR

N

N

HAD

HEAT ACTIVATED DEVICE (not for new technical objects)

NA

NA

HD

HEAT DETECTOR

DETECTOR HEAT

N

N

MA

MANUAL ALARM (FAB, PCSS platforms)

ALARM MANUAL

N

N

MW

MANUAL RELEASE BUTTON (Water, deluge) incl. Fire area

BUTTON MANUAL RELEASE WATER BUTTON MANUAL RELEASE DELUGE

N

N

SD

SMOKE DETECTOR

DETECTOR SMOKE N

N

5.11.8 Alpha Prefix Legend - Category 43 Instrument Valves Prefix

Description

SAP Description

Equip.no.

Serial no.

BYV*

SOLENOID VALVE (blowdown)

VALVE SOLENOID

N

N

EYV*

SOLENOID VALVE (emergency)

VALVE SOLENOID

N

N

HNV

PNEUMATIC / HYDRAULIC VALVE, MANUAL OPERATED

VALVE HYDRAULIC VALVE PNEUMATIC

N

N

HYV

SOLENOID VALVE (with mechanical operator)

VALVE SOLENOID

N

N

PNV

PNEUMATIC / HYDRAULIC VALVE (with mechanical operator)

VALVE PNEUMATIC VALVE HYDRAULIC

N

N

XYV

SOLENOID VALVE (electrically operated i.e. PSD system)

VALVE SOLENOID

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

148

Technical Object Numbering/Tag Numbering

Total

236

5.11.9 Alpha Prefix Legend - Category 43 Instruments This table is valid for physical objects only, not for signals. Note: 1. All Instrument and Valve codes are based on the ISA format table shown in Section 5.11.16 ISA Format Table (Alpha Prefixes) on page 167 2. Items marked with an asterisk (*) are COPNO variations from the ISA format. Prefix

Description

SAP Description

Equip.no.

Serial no.

AE

ANALYZER PRIMARY ELEMENT

ELEMENT PRIMARY ANALYZING

N

N

AI

ANALYZER INDICATOR

INDICATOR ANALYZING

N

N

AIC

ANALYZER INDICATING CONTROLLER

CONTROLLER ANALYZING INDICATING

N

N

AR

ANALYZER RECORDER

RECORDER ANALYZING

N

N

ARC

ANALYZER RECORDING CONTROLLER

CONTROLLER ANALYZING RECORDER

N

N

AT

ANALYZER TRANSMITTER

TRANSMITTER ANALYZING

N

N

BA

BURNER ALARM

ALARM BURNER

N

N

BAL

BURNER ALARM LOW

ALARM BURNER LOW

N

N

BAH

BURNER ALARM HIGH

ALARM BURNER HIGH

N

N

BE

BURNER PRIMARY ELEMENT

ELEMENT PRIMARY BURNER

N

N

BT

BURNER TRANSMITTER

TRANSMITTER BURNER

N

N

CE

CONDUCTIVITY PRIMARY ELEMENT

ELEMENT PRIMARY CONDUCTIVITY

N

N

CI

CONDUCTIVITY INDICATOR

INDICATOR CONDUCTIVITY

N

N

CIC

CONDUCTIVITY INDICATING CONTROLLER

CONTROLLER CONDUCTIVITY INDICATING

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

149

Technical Object Numbering/Tag Numbering

Prefix

Description

CP *

236

Equip.no.

Serial no.

PANEL CONTROL CONTROL PANEL (see also 5.11.5 Alpha Prefix Legend Category 28 & 43 Panels (Electrical & Instrument) on page 145)

N

N

CR

CONDUCTIVITY RECORDER

RECORDER CONDUCTIVITY

N

N

CRC

CONDUCTIVITY RECORDING CONTROLLER

CONTROLLER RECORDING CONDUCTIVITY

N

N

CT

CONDUCTIVITY TRANSMITTER

TRANSMITTER CONDUCTIVITY

N

N

DA

DENSITY ALARM

ALARM DENSITY

N

N

DAH

DENSITY ALARM HIGH

ALARM DENSITY

N

N

DAHH

DENSITY ALARM HIGH HIGH

ALARM DENSITY

N

N

DAL

DENSITY ALARM LOW

ALARM DENSITY

N

N

DALL

DENSITY ALARM LOW LOW

ALARM DENSITY

N

N

DC

DENSITY CONTROLLER

CONTROLLER DENSITY

N

N

DE

DENSITY PRIMARY ELEMENT ELEMENT DENSITY PRIMARY

N

N

DI

DENSITY INDICATOR

INDICATOR DENSITY

N

N

DIC

DENSITY INDICATING CONTROLLER

CONTROLLER DENSITY INDICATING

N

N

DR

DENSITY RECORDER

RECORDER DENSITY

N

N

DSH

DENSITY SWITCH HIGH

SWITCH DENSITY

N

N

DSHH

DENSITY SWITCH HIGH HIGH

SWITCH DENSITY

N

N

DSL

DENSITY SWITCH LOW

SWITCH DENSITY

N

N

DSLL

DENSITY SWITCH LOW LOW

SWITCH DENSITY

N

N

DT

DENSITY TRANSMITTER

TRANSMITTER DENSITY

N

N

ET

VOLTAGE TRANSMITTER

TRANSMITTER VOLTAGE

N

N

FA

FLOW ALARM

ALARM FLOW

N

N

FAH

FLOW ALARM HIGH

ALARM FLOW

N

N

Document / Revision No. 2169 / 09

SAP Description

Total

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

150

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

FAHH

FLOW ALARM HIGH HIGH

ALARM FLOW

N

N

FAL

FLOW ALARM LOW

ALARM FLOW

N

N

FALL

FLOW ALARM LOW LOW

ALARM FLOW

N

N

FE

FLOW PRIMARY ELEMENT

ELEMENT FLOW

N

N

FG

FLOW GLASS (observation only)

GLASS FLOW

N

N

FI

FLOW INDICATOR

INDICATOR FLOW

N

N

FIC

FLOW INDICATING CONTROLLER

CONTROLLER FLOW INDICATING

N

N

FO

FLOW ORIFICE (restriction)

ORIFICE FLOW

N

N

FQ

FLOW TOTALISER

TOTALIZER FLOW

N

N

FQI

FLOW TOTALIZER INDICATOR TOTALIZER FLOW INDICATING

N

N

FR

FLOW RECORDER

RECORDER FLOW

N

N

FS

FLOW SWITCH

SWITCH FLOW

N

N

FSH

FLOW SWITCH HIGH

SWITCH FLOW

N

N

FSHH

FLOW SWITCH HIGH HIGH

SWITCH FLOW

N

N

FSL

FLOW SWITCH LOW

SWITCH FLOW

N

N

FSLL

FLOW SWITCH LOW LOW

SWITCH FLOW

N

N

FT

FLOW TRANSMITTER

TRANSMITTER FLOW

N

N

FY

FLOW SIGNAL CONVERSION ELEMENT

ELEMENT FLOW SIGNAL CONVERSION

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

151

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

GC

GRAVITY CONTROLLER

CONTROLLER GRAVITY

N

N

GE

GRAVITY PRIMARY ELEMENT ELEMENT GRAVITY PRIMARY

N

N

GI

GRAVITY INDICATOR

INDICATOR GRAVITY N

N

GIC

GRAVITY INDICATING CONTROLLER

CONTROLLER GRAVITY INDICATING

N

N

GR

GRAVITY RECORDER

RECORDER GRAVITY

N

N

GRC

GRAVITY RECORDING CONTROLLER

CONTROLLER GRAVITY RECORDING

N

N

GT

GRAVITY TRANSMITTER

TRANSMITTER GRAVITY

N

N

HC

HAND CONTROLLER

CONTROLLER HAND

N

N

HMR

HYDRAULIC MANIFOLD RETURN

MANIFOLD RETURN HYDRAULIC

N

N

HMS

HYDRAULIC MANIFOLD SUPPLY

MANIFOLD SUPPLY HYDRAULIC

N

N

HIC

HAND INDICATING CONTROLLER

CONTROLLER HAND INDICATING

N

N

HS

HAND SWITCH (for start/stop functions, for shutdown functions see MS)

SWITCH MANUAL

N

N

HY

HAND SIGNAL CONVERSION ELEMENT

ELEMENT CONVERSION HAND SIGNAL

N

N

IA

CURRENT ALARM

ALARM CURRENT

N

N

I-P*

ELECTRO - PNEUMATIC CONVERTER

CONVERTER EL/PN

N

N

IS

CURRENT SWITCH

SWITCH CURRENT

N

N

IT

CURRENT TRANSMITTER

TRANSMITTER CURRENT

N

N

JT

POWER TRANSMITTER

TRANSMITTER POWER

N

N

KI

TIME INDICATOR

INDICATOR TIME

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

152

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

KS

SEQUENCE RELATED SWITCH FUNCTION

SWITCH SEQUENCE

N

N

LA

LEVEL ALARM

ALARM LEVEL

N

N

LAH

LEVEL ALARM HIGH

ALARM LEVEL

N

N

LAHH

LEVEL ALARM HIGH HIGH

ALARM LEVEL

N

N

LAL

LEVEL ALARM LOW

ALARM LEVEL

N

N

LALL

LEVEL ALARM LOW LOW

ALARM LEVEL

N

N

LCP *

LOCAL CONTROL PANEL PANEL LOCAL CON(see note 5.11.5 Alpha Prefix TROL Legend - Category 28 & 43 Panels (Electrical & Instrument) on page 145)

N

N

LG

LEVEL GLASS (observation only column)

GLASS LEVEL

N

N

LI

LEVEL INDICATOR (manometer)

INDICATOR LEVEL

N

N

LIC

LEVEL INDICATING CONTROLLER

CONTROLLER LEVEL INDICATING

N

N

LR

LEVEL RECORDER

RECORDER LEVEL

N

N

LRC

LEVEL RECORDING CONTROLLER

CONTROLLER LEVEL N RECORDING

N

LS

LEVEL SWITCH

SWITCH LEVEL

N

N

LSH

LEVEL SWITCH HIGH

SWITCH LEVEL

N

N

LSHH

LEVEL SWITCH HIGH HIGH

SWITCH LEVEL

N

N

LSL

LEVEL SWITCH LOW

SWITCH LEVEL

N

N

LSLL

LEVEL SWITCH LOW LOW

SWITCH LEVEL

N

N

LT

LEVEL TRANSMITTER

TRANSMITTER LEVEL

N

N

LY

LEVEL SIGNAL CONVERSION ELEMENT

ELEMENT LEVEL SIGNAL CONVERSION

N

N

MAH

MOISTURE ALARM HIGH

ALARM MOISTURE

N

N

MAHH

MOISTURE ALARM HIGH HIGH

ALARM MOISTURE

N

N

MC

MOISTURE CONTROLLER

CONTROLLER MOISTURE

N

N

ME

MOISTURE PRIMARY ELEMENT

ELEMENT MOISTURE

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

153

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

MI

MOISTURE INDICATOR

INDICATOR MOISTURE

N

N

MIC

MOISTURE INDICATING CONTROLLER

CONTROLLER MOISTURE INDICATING

N

N

MR

MOISTURE RECORDER

RECORDER MOISTURE

N

N

MRC

MOISTURE RECORDING CONTROLLER

CONTROLLER MOISTURE RECORDING

N

N

MS

MANUAL SHUTDOWN SWITCH

SWITCH MANUAL

N

N

MT

MOISTURE TRANSMITTER

TRANSMITTER MOISTURE

N

N

NE

VISCOSITY ELEMENT

ELEMENT VISCOSITY

N

N

NI

VISCOSITY INDICATOR

INDICATOR VISCOSITY

N

N

NT

VISCOSITY TRANSMITTER

TRANSMITTER VISCOSITY

N

N

OE

CORROSION PRIMARY ELEMENT

ELEMENT CORROSION PRIMARY

N

N

OI

CORROSION INDICATOR

INDICATOR CORROSION

N

N

OIT

CORROSION DATA COLLECTION UNIT

UNIT CORROSION DATA COLLECTION

N

N

OP

CORROSION TEST CONNECTION

CONNECTION CORROSION TEST

N

N

OT

CORROSION TRANSMITTER

TRANSMITTER CORROSION

N

N

OYT

CORROSION DATA CONVERSION ELEMENT

ELEMENT CONVERSION CORROSION DATA

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

154

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

PA

PRESSURE ALARM

ALARM PRESSURE

N

N

PAH

PRESSURE ALARM HIGH

ALARM PRESSURE

N

N

PAHH

PRESSURE ALARM HIGH HIGH

ALARM PRESSURE

N

N

PAL

PRESSURE ALARM LOW

ALARM PRESSURE

N

N

PALL

PRESSURE ALARM LOW LOW ALARM PRESSURE

N

N

PC

PRESSURE CONTROLLER

CONTROLLER PRESSURE

N

N

PDA

PRESSURE DIFFERENTIAL ALARM

ALARM PRESSURE DIFFERENTIAL

N

N

PDAH

PRESSURE DIFFERENTIAL ALARM HIGH

ALARM PRESSURE DIFFERENTIAL

N

N

PDAHH

PRESSURE DIFFERENTIAL ALARM HIGH HIGH

ALARM PRESSURE DIFFERENTIAL

N

N

PDAL

PRESSURE DIFFERENTIAL ALARM LOW

ALARM PRESSURE DIFFERENTIAL

N

N

PDALL

PRESSURE DIFFERENTIAL ALARM LOW LOW

ALARM PRESSURE DIFFERENTIAL

N

N

PDI

PRESSURE DIFFERENTIAL INDICATOR

INDICATOR PRESSURE DIFFERENSIAL

N

N

PDIC

PRESSURE DIFFERENTIAL INDICATOR CONTROLLER

CONTROLLER PRESSURE DIFFERENSIAL INDICATING

N

N

PDR

PRESSURE DIFFERENTIAL RECORDER

RECORDER PRESSURE DIFFERENSIAL

N

N

PDS

PRESSURE DIFFERENTIAL SWITCH

SWITCH PRESSURE DIFFERENSIAL

N

N

PDSH

PRESSURE DIFFERENTIAL SWITCH HIGH

SWITCH PRESSURE DIFFERENSIAL

N

N

PDSHH

PRESSURE DIFFERENTIAL SWITCH HIGH HIGH

SWITCH PRESSURE DIFFERENSIAL

N

N

PDSL

PRESSURE DIFFERENTIAL SWITCH LOW

SWITCH PRESSURE DIFFERENSIAL

N

N

PDSLL

PRESSURE DIFFERENTIAL SWITCH LOW LOW

SWITCH PRESSURE DIFFERENSIAL

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

155

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

PDT

PRESSURE DIFFERENTIAL TRANSMITTER

TRANSMITTER PRESSURE DIFFERENSIAL

N

N

PDY

PRESSURE DIFFERENTIAL CONVERSION ELEMENT

ELEMENT CONVERSION PRESSURE DIFFERENSIAL

N

N

PE

PRESSURE PRIMARY ELEMENT

ELEMENT PRESSURE

N

N

PI

PRESSURE INDICATOR

INDICATOR PRESSURE

N

N

PIC

PRESSURE INDICATING CONTROLLER

CONTROLLER PRESSURE INDICATING

N

N

P-I

PNEUMATIC - ELECTRO CONVERTER

CONVERTER PNEUMATIC/ ELETRICAL

N

N

PMS

PNEUMATIC MANIFOLD SUPPLY

MANIFOLD SUPPLY PNEUMATIC

N

N

PR

PRESSURE RECORDER

RECORDER PRESSURE

N

N

PRC

PRESSURE RECORDING CONTROLLER

CONTROLLER PRESSURE RECORDING

N

N

PRV

PRESSURE REGULATOR (i.e. air regulators)

REGULATOR PRESSURE

N

N

PS

PRESSURE SWITCH

SWITCH PRESSURE

N

N

PSE

PRESSURE SAFETY ELEMENT (rupture disc)

ELEMENT PRESSURE SAFETY

N

N

PSH

PRESSURE SWITCH HIGH

SWITCH PRESSURE

N

N

PSHH

PRESSURE SWITCH HIGH HIGH

SWITCH PRESSURE

N

N

PSL

PRESSURE SWITCH LOW

SWITCH PRESSURE

N

N

PSLL

PRESSURE SWITCH LOW LOW

SWITCH PRESSURE

N

N

PT

PRESSURE TRANSMITTER

TRANSMITTER PRESSURE

N

N

PU

PURGE CONTROL UNIT

UNIT PURGE CONTROL

N

N

PY

PRESSURE SIGNAL CONVERSION ELEMENT

ELEMENT PRESSURE SIGNAL CONVERSION

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

156

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

SA

SPEED ALARM

ALARM SPEED

N

N

SAH

SPEED ALARM HIGH

ALARM SPEED

N

N

SAHH

SPEED ALARM HIGH HIGH

ALARM SPEED

N

N

SAL

SPEED ALARM LOW

ALARM SPEED

N

N

SALL

SPEED ALARM LOW LOW

ALARM SPEED

N

N

SC

SPEED CONTROLLER

CONTROLLER SPEED

N

N

SE

SPEED ELEMENT

ELEMENT SPEED

N

N

SI

SPEED INDICATOR

INDICATOR SPEED

N

N

SIC

SPEED INDICATING CONTROLLER

CONTROLLER SPEED INDICATING

N

N

SR

SPEED RECORDER

RECORDER SPEED

N

N

SRC

SPEED RECORDING CONTROLLER

CONTROLLER SPEED RECORDING

N

N

SS

SPEED SWITCH

SWITCH SPEED

N

N

SSH

SPEED SWITCH HIGH

SWITCH SPEED

N

N

SSHH

SPEED SWITCH HIGH HIGH

SWITCH SPEED

N

N

SSL

SPEED SWITCH LOW

SWITCH SPEED

N

N

SSLL

SPEED SWITCH LOW LOW

SWITCH SPEED

N

N

ST

SPEED TRANSMITTER

TRANSMITTER SPEED

N

N

SZ

SPEED FINAL CONTROL ELEMENT

ELEMENT SPEED FINAL CONTROL

N

N

SY

SPEED SIGNAL CONVERSION ELEMENT SPEED ELEMENT SIGNAL CONVERSION

N

N

TA

TEMPERATURE ALARM

ALARM TEMPERATURE

N

N

TAH

TEMPERATURE ALARM HIGH

ALARM TEMPERATURE

N

N

TAHH

TEMPERATURE ALARM HIGH HIGH

ALARM TEMPERATURE

N

N

TAL

TEMPERATURE ALARM LOW

ALARM TEMPERATURE

N

N

TALL

TEMPERATURE ALARM LOW LOW

ALARM TEMPERATURE

N

N

TC

TEMPERATURE CONTROLLER

CONTROLLER TEMPERATURE

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

157

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

TE

TEMPERATURE PRIMARY ELEMENT

ELEMENT TEMPERATURE

N

N

TI

TEMPERATURE INDICATOR

INDICATOR TEMPERATURE

N

N

TIC

TEMPERATURE INDICATING CONTROLLER

CONTROLLER TEMPERATURE INDICATING

N

N

TP

TEST POINT FOR DELUGE SYSTEMS

TESTPOINT

N

N

TR

TEMPERATURE RECORDER

RECORDER TEMPERATURE

N

N

TRC

TEMPERATURE RECORDING CONTROLLER

CONTROLLER TEMPERATURE RECORDING

N

N

TS

TEMPERATURE SWITCH

SWITCH TEMPERATURE

N

N

TSH

TEMPERATURE SWITCH HIGH

SWITCH TEMPERATURE

N

N

TSHH

TEMPERATURE SWITCH HIGH HIGH

SWITCH TEMPERATURE

N

N

TSL

TEMPERATURE SWITCH LOW SWITCH TEMPERATURE

N

N

TSLL

TEMPERATURE SWITCH LOW SWITCH LOW TEMPERATURE

N

N

TT

TEMPERATURE TRANSMITTER

TRANSMITTER TEMPERATURE

N

N

TW

TEMPERATURE WELL (thermowell)

THERMOWELL

N

N

TY

TEMPERATURE TRANSMITTER CONVERSION ELEMENT

ELEMENT TEMPERATURE CONVERSION

N

N

UA

COMMON ALARM

ALARM

N

N

UC

MULTIVARIABLE CONTROLLER

CONTROLLER MULTIVARIABLE

N

N

UI

MULTIVARIABLE CALCULATION INDICATOR

INDICATOR MULTIVARIABLE CALCULATING

N

N

UIC

MULTIVARIABLE INDICATING CONTROLLER

CONTROLLER MULTIVARIABLE INDICATING

N

N

US

MULTIVARIABLE SWITCH

SWITCH MULTIVARIABLE

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

158

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

UT

MULTIVARIABLE TRANSMITTER

TRANSMITTER MULTIVARIABLE

N

N

UY

MULTIVARIABLE SIGNAL CONVERSION ELEMENT

ELEMENT MULTIVARIABLE SIGNAL CONVERSION

N

N

VA

VIBRATION ALARM

ALARM VIBRATION

N

N

VAH

VIBRATION ALARM HIGH

ALARM VIBRATION

N

N

VAHH

VIBRATION ALARM HIGH HIGH

ALARM VIBRATION

N

N

VE

VIBRATION ELEMENT

ELEMENT VIBRATION

N

N

VI

VIBRATION INDICATOR

INDICATOR VIBRATING

N

N

VS

VIBRATION SWITCH

SWITCH VIBRATION

N

N

VSH

VIBRATION SWITCH HIGH

SWITCH VIBRATION

N

N

VSHH

VIBRATION SWITCH HIGH HIGH

SWITCH VIBRATION

N

N

VT

VIBRATION TRANSMITTER

TRANSMITTER VIBRATION

N

N

WA

WEIGHT ALARM

ALARM WEIGHT

N

N

WAH

WEIGHT ALARM HIGH

ALARM WEIGHT

N

N

WAHH

WEIGHT ALARM HIGH HIGH

ALARM WEIGHT

N

N

WE

WEIGHT PRIMARY ELEMENT

ELEMENT WEIGHT

N

N

WI

WEIGHT INDICATOR

INDICATOR WEIGHT

N

N

WQ

WEIGHT TOTALISER

TOTALIZER WEIGHT

N

N

WR

WEIGHT RECORDER

RECORDER WEIGHT

N

N

WT

WEIGHT TRANSMITTER

TRANSMITTER WEIGHT

N

N

XA

UNSPECIFIED ALARM

ALARM

N

N

XE

UNSPECIFIED PRIMARY ELEMENT

ELEMENT (specify function)

N

N

XI

UNSPECIFIED INDICATOR

INDICATOR (specify function)

N

N

XS

UNSPECIFIED SWITCH FUNCTION

SWITCH (specify function)

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

159

Technical Object Numbering/Tag Numbering

Total

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

XT

UNSPECIFIED TRANSMITTER

TRANSMITTER (specify function)

N

N

ZE

POSITION ELEMENT

ELEMENT POSITION

N

N

ZI

DISPLACEMENT VIBRATION MONITOR

VIBRATION POSITION INDICATION

N

N

ZL

POSITION LIGHT (indicator)

INDICATOR POSITION LIGHT

N

N

ZLL

POSITION LIGHT LOW (indicator, used with ZSL)

INDICATOR POSITION LIGHT

N

N

ZLH

POSITION LIGHT HIGH (indicator, used with ZSH)

INDICATOR POSITION LIGHT

N

N

ZS

POSITION SWITCH (limit switch)

SWITCH POSITION

N

N

ZSH

POSITION LIMIT SWITCH OPEN

SWITCH POSITION (specify object) OPEN

N

N

ZSL

POSITION LIMIT SWITCH CLOSED

SWITCH POSITION (specify object) CLOSED

N

N

ZT

POSITION TRANSMITTER

TRANSMITTER POSITION

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

160

Technical Object Numbering/Tag Numbering

Total

236

5.11.10Alpha Prefix/Suffix Legend - Category 43 PCDA control, alarm and information signals The below table shows the significance of the signal prefix: Prefix

Description

XA

Alarm Signal

XI

Information / Status Signal

XS

SD / Activation Signal

The below table identifies signals/suffixes which require the signal to be registered in SAP on an individual basis: Suffix

Description

SAP Description

Equip.no.

Serial no.

E

ESD

SIGNAL ESD

N

N

F

FIRE & GAS

SIGNAL F&G

N

N

P

PSD

SIGNAL PSD

N

N

The below tables identifies signals/suffixes which will only require one common registration in SAP pr. sequence number. This signal shall be registered without prefix and suffix in SAP, i.e. BD/EKOM/ 43 12345 Suffix

Description

SAP Description

Equip.no.

Serial no.

PCDA

SIGNAL PCDA

N

N

This table identifies the suffixes which shall be included in the common signal above: Suffix

Description

A

START / STOP

B

RUNNING

C

AVAILABLE

D

CURRENT (amp)

G

POWER OUT

I

VOLTAGE

K

Kw (power)

L

OVER CURRENT

M

OVER TEMPEMPERATURE

N

UNDER VOLTAGE

O

UNDER FREQUENCE

Q

EARTH FAULT

R

CLOSE C.B.

S

OPEN C.B.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

Suffix

Description

T T

C.B. TEST (Ekofisk ABB syst.) C.B. TRIP (Eldfisk SAS syst.)

U

C.B. CLOSED

V

C.B. OPEN

W

C.B. TRIPPED

X

EARTH SW CLOSED

Y

COMMON ALARM (FAULT)

Z

COS PHI

161

Total

236

NOTE: The above tables set the requirements and limitations for SAP registration of signals. These requirements shall not in any way limit the requirements for individual signals in the facility control systems.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Total

162

Technical Object Numbering/Tag Numbering

236

5.11.11Alpha Prefix Legend - Category 60, Pipeline Systems (pig launchers/receivers, pipelines, risers & J-Tube) Prefix

Description

SAP Description

Equip.no.

Serial no.

P

PIPELINE

PIPELINE

N

N

R

RISER INCLUDING LAUNCHER AND RECEIVER

RISER LAUNCHER RECEIVER

N

N

J

J -TUBE

J-TUBE

N

N

5.11.12Alpha Prefix Legend - Category 60 Pipe Support / Penetration Prefix

Description

SAP Description

Equip.no.

Serial no.

PS

PIPE SUPPORT

PIPE SUPPORT

N

N

PP

PENETRATION

PENETRATION

N

N

5.11.13Alpha Prefix Legend - Category 13 & 80 Communication (telecom) Equipment Prefix

Description

SAP Description

AE

ACCESS POINT EX

ACCESS POINT EX + for N what type of equipment

N

AH

ACOUSTIC HOOD

HOOD ACOUSTIC

N

N

AM

SIGNAL / DISTRIBUTION AMPLIFIERS

AMPLIFIER SIGNAL AMPLIFIER DISTRIBUTION

N N

N N

AP

ACCESS POINT

ACCESS POINT + for what type of equipment

N

N

AU

ACCESS UNIT

ACCESS UNIT

N

N

CA

CAMERA

CAMERA

N

N

CE

Ex CAMERA UNIT

CAMERA EX

N

N

CT

CENTRAL EQUIPMENT

EQUIPMENT CENTRAL

N

N

DF

DISTRIBUTION FRAME

FRAME DISTRIBUTION + for what type of equipment

N

N

ER

EQUIPMENT RACK, CABINET, EQUIPMENT RACKCONSOLE CABINETCONSOLE

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Equip.no.

Serial no.

Approved 11.09.2006

Page no.

Title

Total

163

Technical Object Numbering/Tag Numbering

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

FE

FLASH LIGHT EX UNIT

FLASH LIGHT EX + for what type of equipment

N

N

FL

FLASH LIGHT

FLASH LIGHT + for what type of equipment

N

N

FP

FIBER OPTIC PATCH PANELS PANEL FIBER PATCH OPTIC

N

N

IF

INTERFACE UNITS GENERAL GENERALINTERFACE UNITS

N

N

IO

INPUT / OUTPUT OUTLET / SOCKET

OUTLET + for what system

N

N

LA

RADIO LINK ANTENNA

ANTENNA LINK

N

N

LE

Ex LOUDSPEAKER

LOUDSPEAKER EX + for what type of equipment

N

N

LS

LOUDSPEAKER

LOUDSPEAKER + for what type of equipment

N

N

ME

Ex MICROPHONE UNIT

MICROPHONE EX + for what type of equipment

N

N

MI

MISCELLANEOUS

MISCELLANEOUS + for what type of equipment

N

N

MIE

EX MISCELLANEOUS

MISCELLANEOUS EX + for what type of equipment

MO

MONITOR

MONITOR

N

N

MU

MICROPHONE UNIT

MICROPHONE UNIT MICROPHONE + for what type of equipment

N

N

OC

OPTICAL / ELECTRICAL CONVERTER

CONVERTER MEDIA

N

N

OS

OPERATOR STATION

OPERATOR STATION

N

N

PE

PA CONTROL UNITS EX

PACOS UNIT EX

N

N

PU

PA CONTROL UNITS

PACOS UNIT

N

N

PP

PATCH PANELS, EXCEPT FIBERPATCH (For fiber patch use FP.)

PANEL PATCH + for what type of patch panel

N

N

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Total

164

Technical Object Numbering/Tag Numbering

236

Prefix

Description

SAP Description

Equip.no.

Serial no.

RA

RADIO ANTENNA

ANTENNA + for what type of communication system

N

N

RE

RADIO ANTENNA EX

ANTENNA EX + for what type of communication system

N

N

RL

RADIO LINKS

RADIO LINK

N

N

RU

REMOTE UNIT

REMOTE UNIT

N

N

SD

SPLITTER/ DIVIDER & DISTRIBUTION FILTERS

N SPLITTER + for what type of commun.. system DIVIDER + for what type of commun. system FILTER DISTRIBUTION + for what type of communication system

N

SE

SENSORS

SENSOR

N

N

SW

SWITCH

SWITCH

N

N

TE

Ex TELEPHONE

TELEPHONE EX

N

N

TM

TERMINAL

TERMINAL

N

N

TS

RADIO / TRANSMITTER TRANSCEIVERS

TRANSCEIVER RADIO N + for what type of equipment TRANSCEIVER TRANSMITTER + for what type of equipment

N

VR

VIDEO / AUDIO RECORDERS / RECORDERS VIDEO PLAYERS RECORDERS AUDIO

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

N

N

Approved 11.09.2006

Page no.

Title

Total

165

Technical Object Numbering/Tag Numbering

236

5.11.14 Alpha Prefix Legend - Category 91 Automatic/Actuator Operated Valves Prefix

Description

SAP Description

Equip.no.

Serial no.

AFV

AUTOMATIC FLOW VALVE (production wing)

VALVE AUTOMATIC FLOW

Y

Y

ASV

ANNULUS SAFETY VALVE

VALVE ANNULUS SAFETY

Y

Y

BDV *

BLOWDOWN VALVE

VALVE BLOWDOWN

Y

Y

DHV

DOWN HOLE SAFETY VALVE

VALVE DOWN HOLE SAFETY

Y

Y

ESDV*

EMERGENCY SHUTDOWN VALVE

VALVE EMERGENCY SHUT DOWN

Y

Y

FCV

FLOW CONTROL VALVE (self regulating valve)

VALVE FLOW REGULATING

Y

Y

FV

FLOW (LOOP) CONTROL VALVE

VALVE FLOW CONTROL

Y

Y

GLV

GAS LIFT VALVE

VALVE GAS LIFT

Y

Y

HCV

HAND OPERATED CONTROL VALVE

VALVE HAND CONTROL

Y

Y

HV

AUTOMATIC ISOLATION VALVE

VALVE AUTOMATIC ISOLATION

Y

Y

LBV

LUBRICATOR VALVE

VALVE LUBRICATING

Y

Y

LCV

LEVEL CONTROL VALVE (self regulating valve)

VALVE LEVEL CONTROL REGULATING

Y

Y

LV

LEVEL (LOOP) CONTROL VALVE

VALVE LEVEL CONTROL

Y

Y

PCV

PRESSURE CONTROL VALVE VALVE PRESSURE (self regulating valve) REGULATING

Y

Y

PV

PRESSURE (LOOP) CONTROL VALVE

VALVE PRESSURE CONTROL

Y

Y

TCV

TEMPERATURE CONTROL VALVE (self regulating valve)

VALVE TEMPERATURE REGULATING

Y

Y

TV

TEMPERATURE (LOOP) CON- VALVE TROL VALVE TEMPERATURE CONTROL

Y

Y

XMV

HYDRAULIC MASTER VALVE

VALVE HYDRAULIC MASTER

Y

Y

XV

AUTOMATIC PROCESS SHUT DOWN VALVE (PSD)

VALVE AUTOMATIC

Y

Y

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

166

Technical Object Numbering/Tag Numbering

Total

236

5.11.15 Alpha Prefix Legend - Category 93 Safety Relief Valves Prefix

Description

SAP Description

Equip.no.

Serial no.

PSV

PRESSURE SAFETY (RELIEF) VALVE

VALVE PRESSURE SAFETY

Y

Y

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

167

Total

236

5.11.16 ISA Format Table (Alpha Prefixes) The table below is copied from the ISA standard. FIRST LETTER MEASURED OR INITIATING VARIABLE

SUCCEEDING LETTER MODIFIER

READOUT OR PASSIVE FUNCTION

OUTPUT FUNCTION

MODIFIER

User's Choice

User's Choice

A

Analysis

Alarm

B

Burner, Combustion

User's Choice

C

User's Choice (Conductivity)

D

User's Choice (Density)

E

Voltage

F

Flow Rate

G

User's Choice

H

Hand

I

Current (Electrical)

J

Power

Scan

K

Time, Time Schedule

Time Rate of Change

L

Level

M

User's Choice (Moisture)

N

User's Choice (Viscosity)

User's Choice

O

User's Choice (Corrosion)

Orifice, Restriction

P

Pressure, Vacuum

Point (Test) Connection

Q

Quantity

R

Radiation

S

Speed, Frequency

T

Temperature

U

Multivariable

V

Vibration, Mechanical Analysis

W

Weight, Force

X

Unclassified

X Axis

Y

Event, State or Presence

Y Axis

Relay, Compute, Convert

Z

Position, Dimension

Z Axis

Driver, Actuator, Unclassified, Final Control Element

Document / Revision No. 2169 / 09

Control Differential Sensor (Primary Element) Ratio (Fraction) Glass, Viewing Device High Indicate

Control Station Light

Low

Momentary

Middle, Intermediate User's Choice

User's Choice

Integrate, Totalize Record Safety

Switch Transmit Multifunction

Multifunction

Multifunction

Valve, Damper, Louver Well Unclassified

Unclassified

Owner Director-Plant-and-Equipment-Information

Unclassified

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

168

Total

236

5.12 Example of Tag Syntax for Typical Equipment Categories

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

169

Total

236

TYPICAL EXAMPLE OF INSTRUMENT TAG NUMBERS FOR ONE VALVE Sequence number is unique for each valve including valve on wells. Tag number:

Description:

BD/EKOM/43 EYV-00138

VALVE SOLENOID ESD 91-ESDV-00138

BD/EKOM/43 HS-00138A

BUTTON PUSH ESD RESET 91 ESDV-00138

BD/EKOM/43 HS-00138B

BUTTON PUSH PARTIAL CLOSING 91-ESDV-00138

BD/EKOM/43 LCP-00138

PANEL LOCAL CONTROL 91-ESDV-00138

BD/EKOM/43 PI-00138

INDIC PRESS HYD SUPPLY 43-LCP-00138

BD/EKOM/43 XYV-00138

VALVE SOLENOID PSD 91-ESDV-00138

BD/EKOM/43 ZSH-00138

SWITCH POSITION 91-ESDV-00138 OPEN

BD/EKOM/43 ZSL-00138

SWITCH POSITION 91-ESDV-00138 CLOSED

BD/EKOM/91 ESDV-00138

VALVE ISOLATION OF PROD FLOWLINE TO EKOJ

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

170

Total

236

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

171

Total

236

5.13 Piping Line Numbering 5.13.1 Line Numbering Structure All piping on new installations and on EKOX, EKOJ and ELDE shall be numbered in accordance with the following numbering system:

5.13.2 Line Sequence Number Line sequence number consists of three (3) number characters and is used to uniquely identify each line within a system. The amount of line numbers shall be kept as low as reasonable practical. A line having the same process conditions shall normally keep the line number until process changes takes place (no change at module interfaces unless process conditions changes). Change of line number shall corresponding with system changes at natural isolation points like valves (not tee's or other similar tie in points). The line sequence number shall run consecutively within each system. The line sequence number shall change as follows: •

at system changes

•

at equipment connections

•

at line size changes

•

at location for process changes (i.e. valves for regulation of flow or pressure)

•

at piping class breaks (change of piping class sheet)

If an existing line is modified / repaired using the original Piping Class Sheet (PCS) the original line number shall be used. The new parts of the line are to be included in the piping inspection system (AMIS). Contractor shall inform the COPNO Piping Inspection Engineer.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

172

Total

236

If an existing line is modified / repaired not using the original PCS, the original line number shall not be used for the modified / repaired part of the line. A new line number shall be given to the modified / repaired part of the line. Old line number - New line number - Old line number (if relevant) to be marked on the relevant P&ID. Line List to be updated. The new line to be included in the piping inspection system (AMIS). Contractor shall inform the COPNO Piping Inspection Engineer. If new line number is needed contact COPNO, Data Services Section

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

173

Total

236

5.13.3 Pipe Class Sheet (Specification) The pipe specification is included in the line number via a four (4) character alpha/numeric code structured as follows:

Table 1 - Pressure Class A

=

Class

150#

ASME B16.5

B

=

Class

300#

----"----

C

=

Class

400#

----"---- (not used)

D

=

Class

600#

----"----

E

=

Class

900#

----"----

F

=

Class

1500#

----"----

G

=

Class

2500#

----"----

H

=

2000 psi

API

I

=

3000 psi

API

J

=

5000 psi

API

K

=

10000 psi

API

L

=

15000 psi

API

P

=

Class

4500#

ANSI B16.5

Z

=

PN10

Y

=

PN16 Table 5.13-1- Pressure Class

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

174

Total

236

Table 2 - Material Types C

Carbon steels; Type 235, Type 235LT, Type 360LT

D

Ferritic/Austentic Stainless Steels; Type 22Cr, Type 25Cr

P

Polymers including fibre reinforced

R

Austentic Stainless Steels; Type 6Mo

S

Austentic Stainless Steels; Type 316

T

Titanium

X

High strength low alloyed steels Table 5.13-2- Material Type

The AA character (when used) is reserved for certain application. When used the following means: S

= Sour service

X, Y and Z

= Special application

New piping classes Projects may need piping classes not included in document 5060, Piping and Valve Specification - Greater Ekofisk Field. However, adding or removing components on the PCS shall not be regarded as a new piping class subject to renumbering if the function of the PCS is unchanged with respect to pressure, temperature and service. New piping classes for intermediate pressure/temperature ratings shall use X, Y or Z as 5th and 6th character leaving the four other characters identical to PCS with the standard class rating above. New piping classes (approval must be obtained from COPNO before use of new PCS) to fit a special service shall have a different 4th and/or 6th (NN) character from the piping class.

5.13.4 Pipe Size The pipe size shall be given in inches and will exclude the inch identifier (") in SAP and on drawing. The maximum characters for this field will be four (4), to allow for half sizes (2 1/2"). Example: Actual Size:

SAP & Drawings:

¾“

0.75

2½“

2.50

20 “

20

Actual Size:

SAP & Drawings

20 “

120-205-AD10-20-PR-3

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

175

Total

236

5.13.5 Product Service Codes EKOll & new installations (valid for EKOX, EKOJ, ELDE & New installations) Valid product service codes for EKOll and New installations (valid for EKOX, EKOJ, ELDE & new installations) are listed below, color coding & labeling see section 5.14.7 Labeling of Piping with Color Coding on page 200. Prod. Serv. Description Code AI

AIR INSTRUMENT

AP

AIR PLANT

BA

BULK ADDITIVE POWDER

BB

BULK BARITE

BC

BULK CEMENT

BL

CEMENT SLURRY

BM

HIGH PRESSURE CEMENT

CA

CHEMICAL, METHANOL

CB

CHEMICAL, POLYELECTROLYTE

CC

CHEMICAL, CATALYST

CD

CHEMICAL, DRAG REDUCER

CE

OXYGEN, SCAVENGER

CF

CHEMICAL, AQUEOUS FILM FORMING FLUID (AFFF)

CG

CHEMICAL, GLYCOL

CH

WAX INHIBITOR

CI

CORROSION INHIBITOR

CJ

ANTI FOAM

CK

EMULSION BREAKER

CL

BIOCIDE

CM

SCALE INHIBITOR

CN

LEAN AMINE

CO

SEMI LEAN AMINE

CP

RICH AMINE

CR

AMMONIA (Elde steam generator)

CS

CHEMICAL, SODIUM HYPOCHLORITE SOLUTION

CT

PHOSPHATE (Elde steam generator)

CW

CHEMICAL, GLYCOL/WATER

CX

CHEMICAL, GLYCOL RICH TO REGENERATION, SIVE

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

176

Total

236

Prod. Serv. Description Code CY

CHEMICAL, SODIUM HYDROXIDE

CZ

CHEMICAL, HYDROCHLORIDE ACID

DC

DRAIN, CHEMICAL

DM

DRAIN, MUD

DO

DRAIN, OILY

DS

DRAIN, SEWER/SANITARY

DW

DRAIN, WATER/STORM

FC

COMPLETION FLUID

FJ

JET FUEL

GA

GAS, FIREFIGHTING/CO

GF

GAS, FUEL

GI

GAS, INERT

GW

GAS, WASTE/FLUE

MB

MUD BULK/SOLID

MH

MUD, HIGH PRESSURE

MK

MUD KILL

ML

MUD, LOW PRESSURE MUD/CEMENT

MS

MUD SYSTEM

OB

OIL, BASE

OF

OIL, FUEL (DIESEL)

OH

OIL, HYDRAULIC

OL

OIL, LUBRICATING

OM

OIL, HOT

OS

OIL, SEAL

PB

PROCESS BLOW DOWN

PC

PROCESS, CO RICH VAPOUR

PD

PROCESS, CONDENSED CO

PL

PROCESS HYDROCARBONS LIQUID

PM

PROCESS HYDROCARBONS LIQUID, WET

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

177

Total

236

Prod. Serv. Description Code PR

PROCESS HYDROCARBONS MULTIPHASE, WET

PS

PROCESS HYDROCARBONS VAPOUR, WET

PT

PROCESS TWO PHASE

PV

PROCESS HYDROCARBONS VAPOR

PW

PRODUCED WATER

SP

STEAM, PROCESS

SU

STEAM, UTILITY/PLANT

VA

VENT, ATMOSPHERIC

VF

VENT, FLARE

WA

WATER, SEA ANTILIQUIDIFICATION

WB

WATER, SEA BALLAST/GROUT

WC

WATER, FRESH GLYCOL - COOLING MEDIUM

WD

WATER, FRESH SERVICE

WF

WATER, SEA FIRE FIGHTING

WG

GROUTING SYSTEMS

WH

WATER, FRESH GLYCOL - HEATING MEDIUM

WI

WATER, SEA INJECTION

WJ

WATER, SEA JET

WP

WATER, FRESH POTABLE

WQ

WATER, FRESH HOT (CLOSED CIRCUIT)

WR

WELL RETURN

WS

WATER, SEA

WX

WATER, GLYCOL RICH

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

178

Total

236

5.13.6 Insulation Class The following insulation classes shall be used: Insulation Class code

Description

0

Not insulated.

1

Heat conservation.

2

Cold medium conservation.

3

Personnel protection.

4

Frost proofing.

5

Fire proofing.

6

Acoustic 10 dB.

7

Acoustic 20 dB.

8

Acoustic 30 dB.

9

External condensation protection

If the pipe is heat traced (H) and has insulation / protection the following codes shall be used: A

H+1

B

H+2

C

H+3

D

H+4

E

H+5

F

H+6

G

H+7

H

H+8

I

H+9

Example: J-210-001-BC10-36”-PT-A (A= H (heat trace) + 1 (heat conservation)).

5.13.7 Optional Sub-Code A single alpha character may be appended to the line number string to achieve additional splitting/sorting as required by the Project.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

179

Total

236

5.13.8 Pipe Line Numbering - for New Lines on EKOI Installations, Excluding EKOX, EKOJ, ELDE & New Installations New line numbers shall follow the "old" line numbering system. See example below:

*Note: The piping class sheet (specification) format can vary for new lines on the facilities depending on the situation. The piping class sheets to be used are described in TCD2 document 4583, Piping Design Requirements for New Installations and Modifications to Existing Facilities.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

180

Total

236

5.13.9 Product Service Codes for EKOI Installations (not valid for EKOX, EKOJ, ELDE and new installations) Valid product service codes for EKOl installations are listed below, color coding & labeling see section 5.14.7 Labeling of Piping with Color Coding on page 200. Prod. Serv. Code

Description

AB

Not in use (Air Bulk), use AI or AP

ACID

Not in use (Inhibited Hydrochloric Acid)

AI

Air Instrument

AM

Not in use (Amine,any)

AP

Air Plant

BB

Bulk Barite

BC

Bulk Cement

BL

Cement Slurry

BM

High Pressure Cement

CA

Methanol

CB

Not in use (Cement Bulk), use BC

CD

Gas Firefighting CO2

CE

Oxygen Scavenger Chemical

CG

Glycol Chemical

CH/CL

AFFF Chemical

CH

Not in use (Cement High Pressure), use BM (cement) or HC (hydro Carbon)

CI

Corrosion Inhibitor

CJ

Antifoam Chemical

CK

Emulsion Breaker

CL

Biocide Chemical

CM

Svale Inhibitor Chemical

CS

Sodium Hypochlorite Chemical

CW

Glycol / Water Chemical

C3

Not in use (Propane)

DA

Not in use (DTY Additive)

DC

Drain, Closed

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

Prod. Serv. Code

Description

DG

Not in use (Dry Hydrocarbon)

DF

Not in use ( Diesel Oil), use OF

DM

Not in use (Mud / HC), use MH, ML

DO

Drain, Open

DS

Drain, Sewer / Sanitary

EX

Not in use (Exhaust), use EXH

EXH

Engine Exhaust

FG

Not in use (Gas, Fuel), use GF

FJ

Jet Fuel

FOR

Not in use (Oil, Fuel Return (diesel)), use OF

FOS

Not in use (Oil, Fuel Supply (diesel)), use OF

FW

Not in use (Firewater Salt), use WF

GF

Gas, Fuel

GI

Gas Inert N2

GP

Not in use (Process Gas), use PV

HC

Crude Hydrocarbon

HI

Not in use (Alcohol injection), use CA or CG

HYD

Not in use (Hydraulic Oil), use OH

IH

Not in use (Hydrochloric acid)

KL

Not in use (Kill Line), use MH

LA

Not in use (Liquid Additive)

LF

Not in use (LP Flare), use VF

LG

Lift Gas

MH

Mud, High Pressure

ML

Mud, Low Pressure, Mud/Cement

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

181

Total

236

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

Prod. Serv. Code

Description

OC

Crude Oil

OD

Not in use (Oil, diesel), use OF

OF

Oil, Fuel (Diesel)

OH

Oil, Hydraulic

OL

Oil, Lubricating

OM

Oil hot

PB

Process Blowdown

PR

1) Process Hydrocarbon Multiphase, Wet 2) Three phase production

PS

1) Process HC Vapour wet 2) Process gas 3) Export gas, wet

PT

Process Two phase

PV

1) Process Hydrocarbons Vapour Dry 2) Gas lift 3) Gas Injection 4) Export gas

PW

Produced Water

S

Not in use (Steam), use SP

SC

Steam Condensate

SG

Not in use (Start Gas), use GF

SO

Not in use (Slop Oil), use DC

SP

Steam, Process

VA

Vent Atmospheric

VA

Blowdown (Eldfisk only)

VF

Vent, Flare (HP & LP)

VP

Not in use (Vent Process), use VA, VF

VT

Not in use (Glycol), use CG

WC

Water, Fresh Glycol – Cooling Medium

WCR

Not in use (Water Cooling Return), use WC

WCS

Not in use (Water Cooling Supply), use WC

WD

Not in use ( Wash Down Water) use WS

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

182

Total

236

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

Prod. Serv. Code

Description

WF

Water, sea firefighting

WH

Water & Heating Medium

WHR

Not in use (Water Heating Return), use WH

WHS

Not in use (Water Heating Supply), use WH

WI

Water Injection

WO

Not in use (Oily Water), use PW or DO/DC

WP

Water Fresh Potable

WS

Water, Sea

WSD

Not in use (Water Sea Deareated), use WS

WX

Not in use (Water Produced), use PW

183

Total

236

Note: If no suitable Ekol codes available, use Ekoll codes.

5.14 Specification for Tag Nameplates & Labels 5.14.1 General All technical objects shall have a unique nameplate identifying the object. This specification defines the minimum requirements for size, lettering, material and installation of nameplates and labels. Alternative methods for physical labeling of technical objects are also described in this section. This specification is based upon Company requirements for identification of technical object, relevant statutory requirements, NPD Regulations and ISO (International Standards Organization) standards. The design contractor shall use this specification when providing instructions to suppliers regarding tag nameplates and labels. Deviation from this specification may under special circumstances be approved by the technical responsible (TAG) for the individual technical object or the project representative for a major project. All tag numbers on tag nameplates shall be written as they are written in SAP, without a hyphen between equipment category and prefix code/sequence number. Note that it is NOT a ConocoPhillips requirement that the service description on the tag plate is exactly the same as the tag service description in SAP. The text on the tag plate may be modified to better suit it’s purpose. The information requirement for somebody standing by the equipment may be quite different from that of somebody looking at the tag number in SAP. Example1: Tag number (tag nameplate):

Tag number (SAP):

28 05001-1A

28 05001-1A

43 FT-12345

43 FT-12345

67 50123

67 50123

For presentation of tag numbers on drawings, see Doc. 4314, DFO, Annex C.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

184

Total

236

5.14.2 Design, Fabrication and Installation of Tag Nameplates The following description is applicable for both outdoor and indoor tag nameplates, unless otherwise indicated. Indoor locations, are defined as mechanically ventilated, pressurized areas or rooms with indoor climate.

Material Outdoor.

Material for tag plates mounted outdoors shall be in stainless steel SS 316, and the tag plate shall have a minimum thickness of 1mm.

Indoor.

Material for tag nameplates mounted indoors, shall be manufactured in two layer plastic of Gravoply/ABS plastic or equivalent.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

185

Total

236

Dimensions and Lettering The actual tag number shall have lettering 8mm high, while the tag description shall have lettering 5mm high. Lettering shall start a minimum of 12mm from edge. Lettering shall be centered. The dimensions and lettering for a standard tag nameplate are as follows: Dimension: 110 x 56 mm. Example 1:

Example 2:

Example: 1.line: 30 12345 2.line: MOTOR 3.line: PRODUCTION PUMP 67 12345 4.line: if req. 5.line: MCC CUB: 28 00005-3H

Outdoor.

The lettering shall be engraved with permanent black text. It is recommended that 5mm holes be drilled, in advanced by fabricator, in each corner of the tag nameplate. Standard brackets are available to fit these dimensions.

Indoor.

The lettering shall be engraved with black text on a white background. Standard dimensions for tag nameplate indoors, e.g. living quarter modules/offices, can deviate from this requirement and adjusted for use with each technical object. This, however, must be in acceptable to the technical responsible (TAG).

General information for tag nameplates (indoor/outdoor) shall be in accordance with Section 5.14.4 Examples of Standard/Overall Tag Nameplates on page 187

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

186

Total

236

For the overall tag nameplates described in sections 5.14.4 Examples of Standard/Overall Tag Nameplates on page 187 -

Information for Overall Tag Nameplate, with Tag numbers

-

Information for Tag Nameplates for Local Control Panels, Cabinets, etc.,

-

Information for Overall Tag Nameplates for Supplier Packages / Skids, and

-

Information for Overall Tag Nameplates with Position Numbers, the nameplates size can be decided individually by the fabricator in co-operation with technical responsible (TAG).

Tag label order form will be available on COPNO, E-stream.

Mounting The tag nameplate shall be mounted adjacent to the associated technical object or technical object foundation, but not directly on the technical object. For larger fixed technical object as tanks, junction boxes, panels etc. the tag plate can be mounted directly on the technical object, in an easy to read location. Outdoor.

When mounting stainless steel or coated carbon steel tag nameplates to support brackets stainless steel screws shall be used. Standard brackets from the fabricator shall be used if adequate.

Indoor.

When mounting tag nameplates indoor, size and method of attaching shall be adjusted to suit the material of the technical object.

5.14.3 Tag Descriptions on Tag Nameplates In general, tag nameplate descriptions shall be in accordance to 5.5.2 Tag Descriptions on page 91 . •

Tag plates for electrical technical objects with direct power supply higher than 48V AC, shall refer to MCC cubicle number (see 5.10 Category Descriptions and Tag Number Requirements on page 103 under equipment category 28 "MCC/Switchboard Cubicle Numbering" or circuit number if applicable.

•

Tag description for an electrical motor shall refer to the pump tag and service.

Exeptions: The following objects, tag number and description is needed only: •

Gas detectors’ nameplates shall contain tag number and description only, see example I (Typical tag name plate for a Gas detector). Because of limited space within enclosures, the complete tag number and description shall be mounted outside and only the tag number shall be mounted on the inside of the enclosure. This rule shall apply whether or not opening the enclosure causes a shutdown or even if the enclosure has a window.

•

Manual Valves, see example J (Typical tag name plate for Manual valve)

•

Light fixture, see example K (Typical tag name plate for light fixture)

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

187

Total

236

5.14.4 Examples of Standard/Overall Tag Nameplates Information for Standard Tag Nameplates The following examples can be used for all types of technical objects if sufficient space is available and the nameplates are mounted in a location, which is clearly visible and easy to read. A. Typical tag nameplate for a single MCC cubicle

B.Typical tag name plate for emergency stop

C.Typical tag name plate for start / stop

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

188

Total

236

D. Typical tag name plate for a pump

E. Typical tag name plate for Heaters

F. Typical tag name plate for a pressure switch

G. Typical tag name plate for a pressure safety valve

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

189

Total

236

H. Typical tag name plate for a motor

I. Typical tag name plate for special item

Tag name plate for special item shall be mounted directly on the equipment. Size of tag name plate need to be adjusted. J. Typical tag name plate for a Gas detector

K. Typical tag name plate for Manual valve

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

190

Total

236

L. Typical tag name plate for light fixture

Note: Alternative tag label example: “FEED FROM 28 0009 CIRC 14” Emergency light supplying internal or external battery, shall in addition have the following text “EMERGENCY LIGHT”, included below the tag number.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

191

Total

236

Information for Overall Tag Nameplate, with Tag Numbers This example applies for instrumentation mounted on main technical objects (tanks, pumps, etc.), where the overall main tag nameplate will provide an overview of the instruments associated with the technical object. Reduced size tag nameplates shall be used on the individual tagged instruments with the tag position and the tag number. The overall main tag plate includes the position, the tag number and the tag description (comprising "Equipment Type" and "Tag Function").

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

192

Total

236

Information for Tag Nameplates for Local Control Panels, Cabinets, etc This example contains the tag nameplate as in 5.14.4 Examples of Standard/Overall Tag Nameplates on page 187 and shall apply for local panels, cabinets, etc.

Information for Overall Tag Nameplates for Supplier Packages/Skids Overview tag nameplates (i.e. a simplified GA) shall be prepared by package suppliers or skid mounted technical objects, furnished with tagged technical objects like instruments, pumps, heaters, etc. Layout to be approved by system responsible.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

193

Total

236

Information for Overall Tag Nameplates with Position Numbers This example contains the overall tag nameplate as in 5.14.4 Examples of Standard/Overall Tag Nameplates on page 187. Instead of individual tagging of each technical object, an overview schematic is provided showing the location of the items identified by position number.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

194

Total

236

Information for Tagging, Idenitified by Position Number Example 1 – Top Drive 65 00146

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

195

Total

236

Example 2 – Vertical Pipehandler 65 00035

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

196

Total

236

5.14.5 Labeling of Cable and Core Identification Cores are to be marked from the terminal as follows: -

Terminal number

-

Cable number (see section 5.10 Category Descriptions and Tag Number Requirements on page 103 , category code 26 and 5.11.4 Alpha Prefix Legend - Category 26 Cables (incl. Umbilicals) on page 145)

-

Pair/core number

For cable marking and labeling, see doc. 4584 Electrical, Instrumentation & Telecomm. Installation.

Labeling for Paired Cables in Panels or Boxes with Two or More Terminal Blocks

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

197

Total

236

Labeling for Cables in Junction Boxes or Panels with One Terminal Block

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

198

Total

236

Labeling for Cables in Panels or Boxes with Two or More Terminal blocks

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

199

Total

236

5.14.6 Labeling of HVAC Ductwork Ductwork shall be marked in accordance with NS-5575, Ventilation duct – identification colors. Labels shall be prepared on laminated sheets and the following information and text size shall be required. Line no. 1:

Name of medium (text size - min. 10mm high)

Line no. 2:

Unit number (text size - 7mm high)

Line no. 3:

Service area (text size - 7mm high)

All labels shall be fastened to ducting by using straps (alternatives are, self-tapping screws, pop rivets or glue). Example of labeling for an air intake duct:

Tag nameplates for HVAC ventilation systems including related technical objects shall be in accordance with section 5.14 Specification for Tag Nameplates & Labels on page 183.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Technical Object Numbering/Tag Numbering

200

Total

236

Information for Tagging of HVAC and Refrigeration Units Note: Schematic sketches are for tag information only and not intended to be standard drawings.

5.14.7 Labeling of Piping with Color Coding Labelling of piping and color-coding shall be in conformance with Doc. 5077. For pipeline tagging and numbering see 5.10 Category Descriptions and Tag Number Requirements on page 103 under equipment category 60 and section 5.13 Piping Line Numbering on page 171, respectively. Note: Labels shall be of a stand off sign type having minimal contact with the pipe. Plastic sheets wrapped around the pipe are not acceptable, because water and dirt may become trapped, causing corrosion/cracking.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

6

Document/Drawing Number

6.1

General

201

Total

236

As a minimum, plant and equipment documentation that is defined as Documentation for Operations (DFO) shall be given unique document numbers in accordance with COPENS. Relevant mandatory attributes (codes) shall be included in separate fields (boxes) on the document front page or in the drawing title block, but will not form part of the actual document/ drawing number. If multiple values apply (system /area code) choose the one most relevant to be included on the document/drawing. The mandatory attributes are: -

Area Code (see section 2 Facility/Area Code on page 8)*

-

Project Code (e.g. AFE / PMO nbr)

-

Document/Drawing Type (see section 6.5 Document/Drawing Sub-Type Codes on page 207)*

-

System No. (see section 4 System Number on page 52)*

-

Description (see section 6.4 Document/Drawing Titles and Descriptions on page 207)

-

Revision Code (see section 6.2.1 Standard Document/Drawing Number on page 202, D (Sheet numbering for drawings)

-

Revision Date

-

Purchase Order Identification (Only applicable for supplier information) * All multiple attributes shall be registered for each document/drawing in the Contractor’s document management system, with the intention that they shall be transferred to the Company’s document management system at an agreed time.

Additional attributes to be registered against each document are described in ConocoPhillips Technical Control Document 4314, Documentation for Operations (DFO).

Future Tag Future tag shall be shown in 3D model, if exist or any other relevant drawing as for other functional locations. The drawing shall be marked with a note or similar, indicating that this is future tag.

6.2

Document/Drawing Number Structure Design Documents are to be numbered differently than Supplier Documents for Non-Standard Equipment and Supplier Documents for Standard Equipment (see definition in section 6.2.1 Standard Document/Drawing Number on page 202, B Standard document/drawing number). The Contractor is expected to control the allocation of all document/drawing numbers to avoid duplication.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

202

Total

236

6.2.1 Standard Document/Drawing Number The document/drawing number for new facilities will have the following elements of codes/numbers:

Examples: EKOM-VA-I-00001 (design documentation) EKOM-VA-12345-I-00001 (supplier doc. (Non-Standard Equipment)) (see sec. 6.2.1B) BD01-VA-12345-G-00001 (supplier doc. (Standard Equipment)) (see sec. 6.2.1B) NOTE: See exceptions to standard drawing number in sec. 6.3 Drawing Number Exceptions on page 205. A) Contractor Code Alphanumeric codes (max. 3 characters) shall be established for each Contractor/Originator preparing documents for the project. The code will form part of the document number. The Contractor Codes will be assigned by ConocoPhillips. Failure to do this may cause duplication. The following Contractor/Originator codes have been assigned. AB

ABB Offshore Systems (Stavanger)

ABB

ABB Offshore Systems (Haugesund)

AE

Aker Offshore Partner (Stavanger)

AF

AF Decommissioning

AK

AkerKværner

AL

Allseas (Ekoll)

ALS

Allseas

AV

Aker Verdal

BR

Brown & Root

DNV

Det Norske Veritas

EA

Ekofisk Alliance

FA

Fabricom

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

FU

Fugro Ltd.

HD

Hitec

HI

Heerema

JP

JP Kenny

KE

Kværner Engineering

MH

Marine HVAC

MO

Mollier

OD

Odfjell Drilling

PH

Peder Halvorsen Industrier A/S

PP

ConocoPhillips

RE

Reinertsen

SD

Scandpower

SH

Strachen & Henshaw

SM

Saipam

SO

Sørco

SU

Subsea7

VA

Vetco Aibel

203

Total

236

B) Supplier documentation For Supplier Documentation, the 5-digit Achilles code shall be included in the document number. Non-Standard Equipment Documentation (ref. 4314 DFO Main part, section 1.5.1 “Definitions”) The platform code for these documents will be specific to the platform where the equipment is installed as it will document equipment specifically designed (engineered products) according to Company specifications and not included as part of manufacturers’ standard deliverables. Standard Equipment Documentation (ref. 4314 DFO Main part, section 1.5.1 “Definitions”) Normally the platform code for these documents will be BD01 (Multiple Facilities) as this kind of equipment could be installed at any location and hence independent of system/functional location of the equipment, e.g. operation manual. NOTE: All Supplier Documentation shall have Vendors’ internal document number registered as a characteristic in the Company’s document control system and Standard Equipment Documentation shall always be linked to Material Master number. C) Sequence Number Sequence Number consists of five (5) numeric characters, and is used to uniquely identify a document within each Discipline Code. The sequence number is intended to be non-intelligent and any decision by the Contractor to incorporate intelligence into the sequence number shall first be approved by the Company. Note: See section 6.3.1 Instrument on page 205 for sequence number on ConocoPhillips instrument drawings. Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

204

Total

236

D) Sheet Numbering for Drawings The sheet number is intended to be non-intelligent and any decision by the Contractor to incorporate intelligence into the sequence number shall first be approved by the Company. Where sheet numbering is required, the number will consist of three (3) digits, for example 001, 002, 003 etc. The sheet number will NOT form part of the drawing number and will be indicated in a separate box in the drawing title block. Sheet number will, however, be included on the drawing register. Drawings, which consist of only one sheet, will always be sheet, 001. Sheet “000” and the syntax ”sheet 001 of 00X” shall never be used. The use of cover sheets is discouraged, but should they be used, the cover sheet shall NOT be assigned sheet number 001 and shall NOT be registered in the document management system. E) Revision Codes Revision codes will consist of (2) numeric characters, i.e. 01, 02, 03. Revision code 00 shall NOT be used. NOTE: If necessary a one (1) character alpha code can be used as a suffix for the purpose of indicating revision status during the Project, but must be removed on the final handover documents.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

205

Total

236

6.2.2 Document/Drawing Number for Existing Facilities When modification work is done on existing platforms every effort shall be made to update existing drawings and create as few new drawings as possible. It is acceptable to create additional sheet numbers for existing drawings. When existing drawings/documents are revised please be advised that the revision process shall be administered directly in SAP using the SAP document module and the engineering change management module. Revised documents/drawing shall retain their original document/drawing number. Additional sheets will be added two existing drawings as required. (e.g if a document consists of 50 sheets and two additional sheets are required the document number will be retained.) When new documents/drawings are required, they shall be numbered in accordance with the standard numbering structure described in 6.2.1 Standard Document/Drawing Number on page 202 above or 6.3 Drawing Number Exceptions on page 205. Revision codes will be the same as for new drawing as described in 6.2.1 Standard Document/ Drawing Number on page 202, D.

6.3

Drawing Number Exceptions There are several exceptions to the standard drawing number structure as described in 6.2.1 Standard Document/Drawing Number on page 202. These exceptions have been implemented on existing facilities and will be used on new facilities as well. These exceptions involve the following drawing types and their respective drawing number structures.

6.3.1 Instrument Drawing Types Area Safety

Numbering Structures

Charts1)

EKOM2) - PP3)-F-00001, Sht. 001 - nnn

Fire & Gas Cause & Effect 1)

EKOM2) - PP3)-I-00001, Sht. 001 - nnn

Fire & Gas Block Logic Diagram

EKOM2) - PP3)-I-00003, Sht. 001 - nnn

ESD Block Logic Diagram

EKOM2) - PP3)-I-00004, Sht. 001 - nnn

ESD Test Diagram

EKOM2) - PP3)-I-00066, Sht. 001 - nnn

System Control Diagrams

EKOM2) - PP3)-I-00002, Sht. 001 - nnn

Loop diagram

EKOM2) - PP3)-I-nnnnn4, Sht. 001 - nnn

1. Area Safety Charts (ASC) and Fire & Gas Cause and Effect for the same fire area, must have the same sheet number. 2. EKOM is only used here as an example, the facility code will reflect the relevant platform. 3. Originator PP (ConocoPhillips) shall be used for these drawing types regardless of the originator responsible for the preparation of the drawings. 4. Drawing number to be the same as function location (tag) sequence number.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

206

Total

236

6.3.2 Piping New 2D CAD Inspection ISO drawings, for existing platforms (pre-EKOII), which do not have 3D models. shall use the 60S (UTC) number, as the drawing number. The Company Piping Inspection Engineer will assist in clarifying this with the Contractor.

6.3.3 Supplier Documents and Drawings Supplier documents and drawings shall be numbered in accordance with doc. 4314 Documentation for Operations (DFO), Annex B.

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

6.4

207

Total

236

Document/Drawing Titles and Descriptions SAP Document Module allows for unlimited document/drawing descriptions, however, search results only retrieve the first 40 characters. Descriptions must therefore be registered in a manner which will allow for the retrieval of maximum valued information. Drawing type descriptions, such as Piping & Instrument Diagram and Instrument Loop Diagram must be abbreviated. See section 7 Abbreviations - Document/Drawing & Equipment Module on page 219. For detailed document description specification, see 4314 DFO Requirement Matrix.

6.5

Document/Drawing Sub-Type Codes Document Sub-Type Code is composed of one (1) alpha character defining the main group (sec. 6.5.1 Document Sub-Types on page 207) of documents, and one (1) alpha character defining the specific document with the main group.

6.5.1 Document Sub-Types Below are listed the valid document ConocoPhillips document sub-types. It should be noted that this is not a requirement list for all projects. Drawings will vary depending on the nature of the project. DFO sec.

Sub Type

Doc Sub-Type Description

C

CA

CALCULATIONS AND ANALYSIS Electrical

CA

-

EDSA - Calculations and Report

CA

-

Short Circuit study

CA

-

Protection Device Coordination Study/ Selectivity Analysis

CA

-

Load Study and Load Flow Calculations

CA

-

Calculation of harmonic current and voltages

CA

-

Power system dynamical calculations Telecoms

Document / Revision No. 2169 / 09

CA

-

Telecommunication test reports

CA

-

PA coverage calculations

CA

-

Platform UHF radio coverage charts

CA

-

Fibre loss calculations

CA

-

Coaxial cable loss calculations

CA

-

Availability and reliability calculations

CA

-

Radio Link budgets

CA

-

Transmission budgets for radio links, satellite hops and fibre optic cables

CA

-

Commissioning test results for all telecom equipment

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

DFO sec.

Sub Type

208

Total

236

Doc Sub-Type Description HVAC

CA

-

Numerical Analysis

CA

-

Ventilation Air Volume

CA

-

Calculations/analyses for mechanical ventilation Safety

CA

-

Safety calculations and analysis Structural

CA

-

Structural Design Calculations & Analysis Mechanical

CA

-

Mechanical Calculations & Analysis

CA

-

Pressure Vessels (PV) and Heat Exchanger (HX) Calculations

CA

-

Calculations for internals

CA

-

Thermal Calculations (HX only)

CA

-

Tube vibration analysis (shell & tube HX only)

CA

-

Calculations for atmospheric tanks

CA

-

Design calculations for HX + PV incl. support / skirt Pipelines

CA

-

Structural Design Calculations and Analysis Process

CA

-

Process Simulation Models Instrumentation

CA

-

Intrinsically Safe loop calculations

CA

-

Fusible plug loop pressure drop calculations

CA

-

Thermowell stress / vibration calculations

CA

-

PSV calculations

CA

-

Restriction and flow orifice calculations

CA

-

Availability and reliability calculations

CA

-

Power and heat dissipation calculations

CA

-

Air system and accumulator

CA

-

Hydraulic system and accumulator capacity calculations

CA

-

Control valve calculations

CA

-

Uncertainty calculations Piping

CA

Document / Revision No. 2169 / 09

-

Piping Calculations & Analysis

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

DFO sec.

Sub Type

FABRICATION & VERIFYING DOCUMENTS QA

-

Manufacturing Record Book (MRB) - Total Version

QA

-

Fabrication Record Book (FRB) – Reduced Version

QA

-

Certificates & Verifying Documentation

QA

-

Certificate of conformity

QA

-

Documentation for CE marking

QA

-

Type cert. / ATEX (Ex) cert. / Product cert. issued by third party

QA

-

Certificates needed for re-certification of equipment

QA

-

Calibration certificates

QA

-

Lifting certificates

QA

-

Weighing certificates

QA

-

Pressure test certificates

QA

-

Third Party Verification

D

DATA SHEETS DS

-

Data Sheets

DS

-

Process Data Sheets

DS

-

Special Item Data Sheets

DS

-

Weight Data Sheets

DS

-

Noise Data Sheets

L

2169 / 09

236

Doc Sub-Type Description

Q

Document / Revision No.

209

Total

LISTS LA

-

Single Line Index

LA

-

Protective Device Setting Index

LA

-

Piping Line Lists

LA

-

Lubrication Index

LA

-

Electrical Load List (ELL)

LA

-

Consumption List - Utilities

LA

-

Supplier Document List (SDL)

LA

-

Recommended Spare Part List (RSPL)

LA

-

Blind List

LA

-

Weld Summary Index - Supplier

LA

-

Pipe Support Index

LA

-

Special Item Index

LA

-

Main Equipment List (MEL)

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

DFO sec.

Sub Type

PROCEDURES PA

-

User Manual (Final Documentation)

PA

-

Welding procedures

PA

-

Painting procedures

PA

-

Inspection Programs

PA

-

Operating Instructions

PA

-

Maintenance Instructions

PA

-

Commissioning and Start-up procedures

PA

-

Weight control procedures

PA

-

Performance / functional test procedures

R

2169 / 09

236

Doc Sub-Type Description

P

Document / Revision No.

210

Total

REPORTS RA

-

Risk Assessments Reports / Working Environment Design Reviews

RA

-

Safety Analysis Report (SAR)

RA

-

Project Design Criteria, Philosophies & Guidelines

RA

-

Weight Reports and Database

RA

-

Special Item Report

RA

-

Non-Conformance and Deviations

RA

-

Removal Dossier

RA

-

DFI Resumés for Offshore Cranes and Lifting Equipment

RA

-

DFI Resumés for Load-bearing Structures

RA

-

DFI Resumés for Pipelines

RA

-

Pipeline Reports

RA

-

Project Close-out report

RA

-

Penetration Report

RA

-

HVAC Compliance Plan

RA

-

DFO Execution Plan

RA

-

Performance / functional test reports

RA

-

Firewater design report

RA

-

Passive fire protection design report

RA

-

Source of release schedule

RA

-

SIL (Safety Integrity Level) documentation

RA

-

Fire and gas detection / ESD philosophy

RA

-

Quantitative Risk analysis

RA

-

Design Accidental Load (DAL) Specification

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

DFO sec.

Sub Type RA

-

Sectionalisation philosophy

RA

-

Safety strategy

RA

-

Safety critical valves report

RA

-

Working environment reports

RA

-

Working environment area charts (WEAC) and Database

RA

-

Environmental reports

RA

-

Flare, Vent and Blowdown Report

RA

-

Process Design Reports

RA

-

Piping Stress Report

SCHEDULES SA

-

Not In Use. (Plans & Schedules) Replaced by ?

SA

-

Not In Use. (Project Master Schedule) Replaced by ?

SA

-

Not In Use. (Work Plans) Replaced by ?

SA

-

Not In Use. (Maintenance (PM)) Replaced by ?

T

SPECIFICATIONS TA

Design and Fabrication Specifications

TA

Technical and Functional Description

TA

Anode Manufacturing Specification

V

MULTIMEDIA VA

2169 / 09

236

Doc Sub-Type Description

S

Document / Revision No.

211

Total

Photos/Video Recordings of Equipment

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

212

Total

236

6.5.2 Drawing Sub-Types Below are listed the valid document ConocoPhillips drawing sub-types. It should be noted that this is not a requirement list for all projects. The types of drawing will vary depending on the nature of the project. Discip.Code

Sub Type

Doc Sub-Type Description

A

ARCHITECTURAL/CIVIL DRAWINGS AA

-

General Arrangement / Layout

AB

-

Not In Use. (Sketches & Perspectives)

AC

-

Ceiling Plan Layouts

AD

-

Exterior Details w/Parts List (Building/Structure Type)

AE

-

Not In Use. (Elevation) Replaced by PP

AH

-

Interior Details w/Parts List (Wall/Ceiling System, etc.)

AP

-

Not In Use. (Plane) Replaced by AA.

AR

-

Room Layout

AS

-

Schedules Finishing/Equipment/Furniture/Doors/Signs, etc.

AT

-

Not In Use. (Temporary Facilities)

AZ

-

Architectural Sections

E

Document / Revision No. 2169 / 09

ELECTRICAL DRAWINGS 1) EA

-

General Arrangement - MCC - Panel (arrangement, internal lay-out and foundation)

EB

-

Not In Use. (Terminal Block Diagram) Replaced by EW + EZ

EC

-

Not in use. (Nodal Diagram)

ED

-

Lighting Layout / Plot Plan

EE

-

Not in use. (Location of EX Proof Equipm.) Replaced by EL + EK + ED + FP + IP + TP + PJ

EF

-

Not in use. (Cable Schedule)

EG

-

Single Line Diagram - MCC - Key Single Line Diagram

EK

-

Heat Tracing

EL

-

Electrical Layout / Plot Plan - Recep. & Heat Tracing JB - El. Equipment - Navigation Aid

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

Discip.Code

Doc Sub-Type Description

EM

Not in Use. (Electrical Loop) Replaced by IL

EN

Not in Use. (Detail Diagram) Replaced by EW + EZ

EP

-

Not in use. (Protection & Coordination) Replaced by RA + CA

EQ

-

Not in use. (Electrical Control & Monitoring Diagram) Replaced by EW + EZ

ER

-

Not In Use. (Cable Rack Layout)

ES

-

Not In Use. (Schematic/Interconn. Diagram) Replaced by EW

ET

-

Legend of Symbols/Standards

EW

-

Wiring Diagram

EY

-

Block Diagram Connection Diagram/Table (internal/external) - MCC Cubicle - Distribution Panel - PLC - Nav. Aid Lighting/Foghorn Station

F

SAFETY ENGINEERING DRAWINGS FA

-

Area Classification

FC

-

Area Safety Chart (ASC)

FD

Not in Use. (System Isometric (Firewater)) Replaced by PS.

FF

Not in Use. (Flow Diag/P&ID for Firewater) Replaced by UE + UF + HC

FG

-

Life Saving Equip. / Escape Route

FH

-

Not in Use. (Fire Fighting Equipment) Replaced by FP.

FI

-

Not In Use. (Fire Area Classification Layout)

FK

-

Safety Sign Location

FN

-

Noise Control Plot Plan

FP

-

Fire Protection/Detection Layout (incl. passive, i.e. fire walls/doors, etc.)

FR

-

Not In Use. (Safety Equipment Details w/Parts List)

FS

2169 / 09

236

Sub Type

EZ

Document / Revision No.

213

Total

Not in Use. (Fire & Safety) Replaced by FG + FP

FT

-

Legend of Symbols / Standards

FX

-

Not in Use. (Passive Fire Protection) Replaced by FP.

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

Discip.Code

Sub Type

214

Total

236

Doc Sub-Type Description

H

HVAC/SANITATION DRAWINGS HA

-

General Arrangement

HB

-

Support (Location and Detail)

HC

-

HVAC Logic Diagram (D&ID)

HE

-

Not In Use. (HVAC Equipment & Details) Replaced by HA

HF

-

Not in Use. (Flow diag. / P&ID for Air Serv.) Replaced by HC.

HG

-

Not in Use. (Flow diag. / P&ID for Wtr Serv.)

HI

-

Not In Use. (HVAC Instrument Location Plan) Replaced by PP

HK

-

Not in Use. (Key Plan)

HN

-

Ducting Isometric

HL

-

Legend of Symbols / Standards

HP

-

Not in Use. (Piping/Plumb. Isom. Fabrication)

HQ

-

Not in Use. (Piping/Plumb Iso Stress/Str)

HS

-

Not in Use. (Sketch)

I

INSTRUMENTATION DRAWINGS 1) IA

-

General Arrangement/Layout

IB

-

Terminal Block/Wiring Diagram

IC

-

F&G Cause & Effect Chart

ID

-

System Block Diagram

IE

Document / Revision No. 2169 / 09

Not in Use. (Instrument/Electrical) Replaced by IB + EW

IF

-

Not In Use. (Earthing Distribution) Replaced by EG

IG

-

Not in Use. (Mech & Detail Panel Arr)

IH

-

Not in Use. (Interconnection Diagram) Replaced by IB + IR

IJ

-

Hook-up details

IK

-

Logic/Sequence Diagram (incl. ESD/F&G/SCD)

IL

-

Loop Diagram

IM

-

Not in Use. (J.B. & Marchall Cab Layout)

IN

-

Not in Use. (ESD Test Diagram) Replaced IQ

IP

-

Instrument Plot Plan

IR

-

Not in Use. (External Connection Diagram) Replaced IB

IS

-

Not In Use. (Schematic Diagram) Replaced by IB

IT

-

Legend of Symbols / Standards

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

Discip.Code

L

Document / Revision No. 2169 / 09

Sub Type

215

Total

236

Doc Sub-Type Description

IQ

-

Control & Monitoring Diagram - Including Cause & Effect charts not related to fire & gas

IW

-

Not in Use. (Wiring Diagram) Replaced by IB

IY

-

Not in Use. (Block Diagram) Replaced by ID + IB

IZ

-

Not in Use. (Connection Diagram) Replaced IB

SUBSEA & PIPELINE (INCL. RISER & J-TUBE) DRAWINGS LA

-

General Arrangement

LB

-

Pipeline Alignment Sheets

LC

-

Not in Use. (Pipeline Isometric (Fabrication)) Replaced by LK

LD

-

Pipeline Protection (incl. Rock Dumping & Pipeline Covers)

LE

-

Pipeline Support (incl. Crossings)

LF

-

Riser Support

LG

-

J-tube Support

LH

-

Not in Use. (Pipeline/Riser Evaluation) Replaced by LK

LI

-

Not in Use. (Isometric (Stress/Strain)) Replaced by LK

LJ

-

J-tube Details w/Parts List

LK

-

Riser /J-Tube Routing/ Isometrics

LM

-

Not in Use. (Subsea Cables / Umbilicals)

LN

-

Not In Use. (Marine Charts)

LP

-

Pipeline Details w/Parts List (incl. Tie-in Spools & repair Clamps)

LR

-

Riser Details w/Parts List

LS

-

Not In Use. (Hydrographic Survey Charts / Sea Maps)

LT

-

Legend of Symbols / Standard Drawings

LX

-

Not In Use. (Subsea & Pipeline Inspection) (incl. DVDs)

LY

-

Not in Use. (Route Enviromental Parameters)

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

216

Discip.Code

Sub Type

M

MECHANICAL DRAWINGS (INCL. VESSELS, TANKS, HEAT EXCHANGERS & VALVES)

2169 / 09

236

Doc Sub-Type Description

MA

-

General Arrangement

MB

-

Material Handling (lifting equipment)

MD

-

Equipment Detail w/Parts List, Cross Section

ME

-

Not In Use. (General Assembly) Replaced by MA

MF

-

Not in Use. (Mechanical Flow Sheets) Replaced by UE + UF

MG

-

Foundation

MH

-

Not In Use. (Hook-up) Replaced by IJ

MK

-

Not in Use. (Key Plan)

MN

-

Not in Use. (Identification Plate)

MP

-

Not in Use. (Mechanical Piping)

MS

-

Not in Use. (Sketch) Replaced by MA

MT

-

Legend of Symbols / Standard Drawing

MX

-

Mechanical Inspection (NDE Drawings)

P

Document / Revision No.

Total

PIPING DRAWINGS PA

-

General Arrangement

PB

-

Not In Use. (Plot Plans / Layout) Replaced by PP.

PC

-

Not in Use. (Piping Connections) Replaced by PD

PD

-

Piping Details

PF

-

Not In Use. (Piping Support Location Plan)

PG

-

Not in Use. (Hydro-Test Iso)

PH

-

Not in Use. (Hook-Up)

PI

-

Piping Isometric

PJ

-

Equipment Layout/Arrangement

PK

-

Not in Use. (Key Plan) Replaced by PJ

PM

-

Piping Stress Isometric

PN

-

Not in Use. (Piping Iso Syst Fluid Dynamic)

PP

-

Equipment Plot Plan (multidiscipline)

PQ

-

Not in Use. (Sketch)

PR

-

Piping Support Detail

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

Discip.Code

Sub Type PS

-

Piping System Isometric (fire water system only)

PT

-

Legend of Symbols / Standards

PX

-

Piping Inspection (NDE Drawings) 2)

PY

-

Not in Use. (Hydro Test Flow Diag)

PZ

-

Not in Use. (Study Drawing)

STRUCTURAL DRAWINGS SA

-

General Arrangement

SB

-

Not In Use. (Secondary Structural Arangement) Replaced by SF

SD

-

Not In Use. (Structure Detail) Replaced by SM + SF

SF

-

Secondary and Outfitting Steel

SH

-

Not In Use. (Temporary Structure)

SJ

-

Not In Use. (Sketch)

SM

-

Main Structure (jacket, bridge, tripod, MSF)

SP

-

Live Loading Diagram

SQ

-

Not In Use. (Structural Concrete)

SR

-

Not In Use. (Concrete Reinforcement)

SS

-

Not In Use. (Concrete Pre-stressing)

ST

-

Legends of Symbols

SU

-

Not In Use. (Structural Standard (Field Wide) & Layout,etc.) Replaced by SM + SF

SW

-

Not In Use. (Material Selection)

SX

-

Not in use. (Structural Inspection (NDE Drawings))

T

2169 / 09

236

Doc Sub-Type Description

S

Document / Revision No.

217

Total

TELECOMMUNICATION DRAWINGS TA

-

General Arrangement

TB

-

Terminal Block Diagram, Schematic Diagram, Wiring Diagram etc.

TC

-

Not in Use. (Logic & Sequence Diagram) Replaced by TG

TD

-

Not in Use. (Equipment Detail w/Parts List) Replaced by TM

TE

-

Not in Use. (Equipment). Replaced by TM

TG

-

Single Line, Riser Diagram, Block Diagram

TH

-

Not In Use. (Hook-up (Process, Pneumatic, Electrical, Hydraulic)). Replaced by TG

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Document/Drawing Number

Discip.Code

Sub Type

218

Total

236

Doc Sub-Type Description

TJ

-

Not in Use. (Termination Diagram & Ext. Connections) Replaced by TB

TK

-

Not in Use. (Junction Box and Marshalling Cabinet Layout) Replaced by TB

TL

-

Not in Use. (Loop Diagram) Replaced by TG

TM

-

Not In Use. (Mechanical Details & Panel Arrangement, etc.). Replaced by TA

TP

-

Plot/Location Plan/Layout

TS

-

Not In Use. (Schematic Diagram). Replaced by TB

TT

-

Legend of Symbols / Standard Drawing

TU

-

Not In Use. (Earthing Distribution). Replaced by TV

TV

-

Power Distribution

TW

-

Not in Use. (Wiring Diagram) Replaced by TB

TY

-

Not in Use. (Block Diagram) Replaced by TB

TZ

-

Not in Use. (Connect Diagram) Replaced by TB

U

PROCESS DRAWINGS UE

Piping & Instrument Diagram (P&ID) Process

UF

Piping & Instrument Diagram (P&ID) Utility

UP

Process Flow Diagram

UT

Legend of Symbols / Standard Drawing

UU

Utility Flow Diagram

W

WEIGHT CONTROL DRAWINGS WA

-

General Arrangement / Layout

WD

-

Equipment Detail w/Parts List

WE

-

Equipment

1) All drawings that describe equipment with voltage over 48V will be coded as electrical drawings. All drawings that describe equipment with voltage of 48V or below will be coded as instrument drawings. 3) For specific systems, to be clarified

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

219

7

Abbreviations - Document/Drawing & Equipment Module

7.1

General

Total

236

This abbreviation list is provided to standardize the syntax for Document, Drawing and Equipment description in cases where the 40 characters available in SAP are not sufficient.

7.1.1 Standard Abbreviation - Document/Drawing & Asset Register Module Description

Abbreviation

ACCELERATE (ION)

ACCEL

ACCUMULATOR

ACCUM

ACCUMULATOR BOTTLE

ACCUM BOTTLE

ACCUMULATOR PNEUMATIC

ACCUM PNEUM

ACKNOWLEDGE

ACKN

ACTUATOR

ACTU

ADAPTER

ADAPT

ADDITIONAL

ADD

AGITATOR

AGIT

AGITATOR MUD

AGIT MUD

AIR BOTTLE

BOTTLE AIR

AIR COMPRESSOR SHUTDOWN

COMP AIR SD

AIR CONDITION (ER)

AIR COND

AIR CONDITION EQUIPMENT

AIR COND EQUIP or AC EQUIP

AIR CONDITION UNIT

AIR COND UNIT or AC UNIT

ALARM

ALARM

ALARM HORN

HORN ALARM

ALUMINIUM

AL

ANALYZER

ANAL

AND

&

ANTENNA

ANT

ANTI-SURGE

A/S

AQUEOUS FILM FORMING FOAM

AFFF

ARRANGEMENT

ARR

ARRESTER

ARREST

ARRESTER FLAME

ARREST FLAME

ASSEMBLY

ASSY

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module Description

Abbreviation

ATMOSPHERE

ATMOS

ATMOSPHERIC VENT METERING

ATMOS VENT MTR

AUTOMATIC

AUTO

AUXILIARY

AUX

BACKUP

BACKUP

BACKUP OVERSPEED

BACK SPEED

BATTERY

BATT

BATTERY CHARGER

CHARG BATT

BEARING

BRG

BILL OF MATERIAL

BOM

BLANKET

BLANKET

BLOCK

BLC

BLOCK DIAGRAM

BLOCK DIAG

BLOW OUT PREVENTER

BOP

BLOWER

BLOW

BLUE EMERGENCY SHUTDOWN

BESD

BOILER

BOIL

BOOSTER

BOOST

BREAKER

BREAK

BRIDGE

BRIDGE

BUTTERFLY

BUTTERF

BY PASS

BP

CABINET

CAB

CABINET CONTROL SYSTEM

CAB CTRL SYS

CABINET FIELD TERMINATION

CAB FIELD TERM

CABINET FIRE AND GAS

CAB F&G

CABINET LIFE JACKET

CAB LIFEJACK

CABINET SURVIVAL SUIT

CAB SURV SUIT

CARBONDIOXIDE

CO2

CELLARDECK

C-DECK

CENTRAL CONTROL ROOM

CCR

CENTRAL EQUIPMENT ROOM

CER

CENTRIFUGE

CENTR

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

220

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module Description

Abbreviation

CENTRIFUGE BACKUP WATER

CENTR BACKUP WTR

CENTRIFUGE COOLING WATER

CENTR COOL WTR

CERTIFICATE

CERT

CERTIFICATE OF CONFORMITY

COC

CHARGER

CHARG

CHEMICAL DRAG REDUCER

CDR

CHILLER

CHILL

CHRISTMAS TREE

X-MAS TREE

CINEMA

CINEM

CIRCUIT (ULATION)

CIRC

CIRCUIT BREAKER

BREAK CIRC

CIRCUIT DIAGRAM

CIRCUIT DIAG

CLOSE

CLOSE

CLOSE DRAIN

DRAIN CLOSE

CLOSE FIREDAMPER

FIRE DAMP CLOSE

COALESCHER

COALESC

COATED(ING)

COAT

COAX(IAL)

COAX

COLLECTION

COLLECT

COMBUSTION(ING)

COMBUST

COMMISSION(ING)

COMM

COMPRESSOR

COMP

COMPUTER

COMPU

COMPUTER EQUIPMENT

COMPU EQUIP

CONDENSER

CONDENS

CONDITION

COND

CONDITION MONITORING

COND MONIT

CONDITION MONITORING SYSTEM

CMS

CONDUCTOR

CONDUCT

CONFERANCE ROOM

CNF ROOM

CONNECTOR

CONNECT

CONNECTOR FLEXIBLE

CONNECT FLEX

CONNECTOR ULTRA HIGH FREQUENCY

CONNECT UHF

CONTAINER

CONT

CONTAINER FIRE EQUIPMENT

CONT FIRE EQUIP

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

221

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

222

Total

236

Description

Abbreviation

CONTROL (LER)

CTRL

CONVERTER

CONVERT

CONVEYOR

CONVEY

COOLER (ING)

COOL

CORROSION

CORR

CRANE OVERHEAD

CRANE OVERH

CROSSOVER

X-OVER

CRUDE OIL BOOSTER PUMP

CRUDE OIL BOOST PMP

CRUDE OIL EXPORT MEETERING

CRUDE OIL EXP MTR

CRUDE OIL EXPORT PUMP

CRUDE OIL EXP PMP

CRUDE OIL EXPORT PUMP LUBE OIL

CRUDE OIL EXP PMP LUB OIL

CRUDE OIL EXPORT PUMP MOTOR

CRUDE OIL EXP PMP MOTOR

CUBICLE

CUB

CURRENT

CURR

CYLINDER

CYL

DAMPER

DAMP

DATA FOR HSE

HSE DATA

DATA OUTLET

DATA OUTL

DEGASSER(ING)

DEGAS

DELAYED

DELAY

DELAYED BLUE ESD

DELAY BESD

DELAYED YELLOW ESD

DELAYED YELLOW ESDDELAY YESD

DENSITOMETER

DENSIOMTR

DENSITY

DENS

DESCRIPTION

DESCR

DESIGN ISOMETRIC

DESIGN ISO

DETECTOR

DETECT

DETECTOR FLAME

DETECT FLAME

DETECTOR GAS

DETECT GAS

DETECTOR HEAT

DETECT HEAT

DETECTOR SMOKE

DETECT SMOKE

DIAGRAM

DIAG

DIESEL

DIES

DIESEL STORAGE FIREWATER PUMP

DIES STOR FIREWTR PMP

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module Description

Abbreviation

DIFFERENTIAL

DIFF

DISABLE

DIS

DISCHARGE

DISCHARG

DISCONNECT (OR) (ION) (ING) (ED)

DISCONN

DISPENSER

DISPEN

DISTRIBUTION

DISTR

DISTRIBUTION BOARD

DISTR BOARD

DISTRIBUTION PANEL

PANEL DISTR

DOCUMENT(ION)

DOC

DOWNSTREAM

DOWNSTR

DRAIN

DRAIN

DRAWING

DWG

DRILL PIPE

DRILLP

DRILLERS BLUE

DRILL BESD

DRILLERS CABIN

CABIN DRILL

DRILLERS STORE

DRILL STORE

DRILLING (ER/S)

DRILL

DRILLING EQUIPMENT SPECIAL

DES

DRILLING OFFICE

DRILL OFFICE

DRYER

DRY

223

Total

236

DUCTING AND INSTRUMENTATION DIAGRAM D&ID DIAG

EARTH FAULT ESD POWER SUPPLY

EARTH F ESD POW SUP

EARTH FAULT

EARTH FAULT

ELECTRIC (AL) (RONIC)

EL or ELEC

ELEMENT

ELEM

ELEVATION

ELEV

ELEVATOR LINKS

ELEV LINKS

EMERGENCY

EMERG

EMERGENCY DIESEL DAY TANK

DAY TANK EMERG DIES

EMERGENCY GENERATOR

GEN EMERG

EMERGENCY SHUTDOWN

ESD

ENCLOUSURE

ENCL

ENGINE

ENG

EQUIPMENT

EQUIP

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

224

Description

Abbreviation

EQUIPMENT RACK

EQUIP RACK

EVAPORATOR

EVAP

EXCHANGER

EXCH

EXCLUDING

EXCL

EXHAUST

EXHAUST

EXPAND(ER)

EXPAN

EXPANDER INLET COOLER

EXPAN INL COOL

EXPANDER INLET SCRUBBER

EXPAN INL SCRUB

EXPANDER TURBO

EXPAN TURBO

EXPLOTION PROOF

EX

EXPLOTION PROOF FLASHING LIGHT

LIGHT FLASH EX

EXPLOTION PROOF LOUDSPEAKER

LOUDSPEAK EX

EXPLOTION PROOF TELEPHONE

TELPH EX

EXPORT

EXP

EXPORT HYDROCARBONE DEWPOINT

EXP HC DEWP

EXTERNAL

EXT

EXTINGUISER DRY POWDER

EXTING DRY POWD

EXTINGUISHER

EXTING

EXTINGUISHER CO2

EXTING CO2

EXTRACT (TOR)

EXTR

EYE WASH CABINET

CAB EYEWASH

FABRICATION RECORD BOOK

FRB

FEEDER

FEED

FIELD TERMINATION CABINET

CAB TERM FIELD

FILTER

FILT

FIRE ALARM BUTTON

FAB

FIRE AND GAS

F&G

FIRE DAMPER

DAMP FIRE or FD

FIRE DAMPER EXTRACT AIR SYSTEM

DAMP FIRE EXTR AIR SYS

FIRE PROTECTION SYSTEM

SYS FIRE PROTEC

FIRE WATER MONITOR RELEASE

FIRE WTR MONIT REL

FIRE WATER PUMP

PMP FIREWTR

FIREWATER

FIREWTR

FIXTURE

FIX

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

225

Description

Abbreviation

FLANGE

FLANGE

FLASH GAS

F/G

FLEXIBLE

FLEX

FLOOR

FLR

FLOW LINE

FLOWL or FL

FREQUENCE

FREQ

FREQUENCE CONVERTER

CONV FREQ

FRESH WATER

FRESHWTR

FUEL GAS CALORIMETER

FUEL CALORI

FUEL GAS KNOC OUT DRUM

FUEL KO DRUM

FUEL GAS MEETERING

FUEL MTR

FUEL GAS MEETERING COMMON USERS

FUEL MTR COM USERS

FUNCTION / FUNCTIONAL

FUNC

GALLON

GAL

GAS DETECTOR

DETECT GAS

GAS EXPORT MEETERING

GAS EXP MTR

GAS GENERATOR

GEN GAS

GAS INJECTION

GAS INJ or GI

GAS INJECTION DOWN STREAM 1ST STAGE

GAS INJ DS 1st

GAS INJECTION MEETERING

GAS INJ MTR

GAS LIFT

GAS LIFT or GL

GAS LIFT COMPRESSOR

COMP GAS LIFT

GAS LIFT COMPRESSOR FREQUENCE CONVERTER

COMP GAS LIFT FREQ CONV

GAS LIFT MEETRING

MTR GAS LIFT

GAUGE

GAUG

GEAR BOX

GEARBX

GENERAL

GENER

GENERAL ARRANGEMENT

GEN ARR or GA

GENERAL ARRANGEMENT DRAWING

GEN ARR DWG or GA ARR DWG

GENERATOR

GEN

GENERATOR GAS

GEN GAS

GENERATOR MAIN TURBINE

GEN MAIN TURB

GLOBE

GLOBE

GLYCOL

TEG

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

226

Total

236

Description

Abbreviation

GLYCOL ABSORBER

GLYCOL ABS

GLYCOL CONTACTOR INLET COOLER

GLYCOL CONTACT INLET COOL

GLYCOL DRY GAS FILTER

FILT GLYCOL DRY GAS

GLYCOL REBOILER

REBOIL GLYCOL

GLYCOL SCRUBBER

SCRUB GLYCOL or SCRUB TEG

GLYCOL UPSTREAM CONTACTOR

GLYCOL CONTACT UPSTR or TEG CONTACT UPSTR

GLYCOL/CONDENSAT SEPARATOR

SEP CONDESAT TEG

GLYCOL/METHANOL

GLYCOL/METH

H2S SCAVENGER

H2S SCAV

HAZARDOUS

HAZ

HAZARDOUS OILY WATER DRAIN

DRAIN HAZ OILY WTR

HEALTH, ENVIRONMENT AND SAFETY

HES

HEAT EXCHANGER

EXCH HEAT

HEAT TRACING ISOMETRIC

HEAT TRACE ISO

HEAT VENTILATION AND AIR CONDITION

HVAC

HEATER (ING)

HEAT

HEATING ELEMENT

ELEM HEAT

HIGH PRESSURE

HIGH PRESS or HP

HIGH SPEED

HIGH SPEED

HIGH VOLTAGE

HV

HORIZONTAL

HORIZ

HOSE REEL

HOSEREEL

HP FLARE KNOCK OUT DRUM

KO DRUM

HP FLASHGAS COMPRESSOR

COMP HP FLASHGAS

HP FLASHGAS COMPRESSOR SUCTION SCRUBBER

COMP HP FLASHGAS SUCT SCRUB

HUMIDIFIER

HUMID

HYDRANT

HYDRANT

HYDRANT FIREWATER

HYDRANT FIREWTR

HYDRAULIC

HYDR

HYDRAULIC FILTER

FILT HYDR

HYDRAULIC POWER UNIT

HPU

HYDROCARBON

HC

HYDROGEN

H2

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module Description

Abbreviation

HYPOCHLORINATOR

HYPOCHLO

INACTIVE

INAC

INDICATOR POSITION

IND POS

INDICATOR TEMPERATURE

IND TEMP

INDICATOR, INDICATE

IND

INERGEN

INERG

INERT GAS

GAS INERT eller N2

INFORMATION MANAGEMENT SYSTEM

IMS

INFRA RED

IR

INHIBITOR

INH

INJECTION

INJ

INLET

INLET

INPUT / OUTPUT

I/O

INSPECTION

INSP

INSPECTION ISOMETRIC

INSP ISO

INSTALL (ION)

INSTAL

INSTRUCTION

INSTRUC

INSTRUMENT (INSTRUMENTATION)

INSTR

INSULATE (INSULATION)

INSUL

INTERFACE PANEL

PANEL INTERF

INTERNAL

INT

INTERNAL ARRANGEMENT

INT ARR

INTERNODE

INTERNODE

ISOLATOR (ION)

ISOL

ISOMETRIC

ISO

ISOMETRIC SYSTEM

SYS ISO

JUNCTION

JUNC

JUNCTION BOX

BOX JUNC

KEYBOARD

KEYB

KITCHEN

KITCH

LABORATORY

LAB

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

227

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

228

Description

Abbreviation

LADDER

LADDER

LAUNCHER

LAUNC

LEVEL

LEV

LIFEBOUY STATION

LIFEBOUY STAT

LIGHT EMERGENCY FIXTURE

LIGHT EMERG FIX

LIGHT FIXTURE

LIGHT FIX

LIQUID

LIQ

LIVING QUARTER

LIVING Q

LOBBY

LOBBY

LOCAL AREA NETWORK

LAN

LOCAL EQUIPMENT ROOM

LER

LOCATION

LOC

LOCKER RESQUE EQUIPMENT

LOCKER RESQ EQUIP

LOGGING UNIT

LOGG U

LOGIC

LOGIC

LOGIC DIAGRAM

LOGIC DIAG

LOOP DIAGRAM

LOOP DIAG

LOOP DRAWING

LOOP DWG

LOSS OVERPRESSURE OFFICE MODULE

LOSS OVERP OFF MOD

LOUDSPEAKER

LOUDSPEAK

LOW PRESSURE

LOW PRESS or LP

LOW RING MAIN PRESSURE

LOW R M

LOW SPEED

LS

LOW VOLTAGE

LV

LOW VOLTAGE SWITCH GEAR ROOM

LV SWG ROOM

LP FLASH GAS COMPRESSOR

COMP LP FLASH GAS

LUBRICATE (TION)

LUBE

LUBRICATIONG OIL

LUBE OIL

MACHINE

MACH

MAIN CIRCUIT BREAKER

MCB

MAIN DECK

M-DECK

MAIN SWITCH GEAR

MAIN SWG

MAINTENANCE

MAINT

MAN OVERBOARD BOAT

MOB BOAT

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

229

Description

Abbreviation

MANIFOLD

MANIFO

MANUEL BLOWDOWN

MAN BDV

MANUEL ESD BYPAS

MAN ESD BYPAS

MANUFACTURER

MFR

MANUFACTURING RECORD BOOK

MRB

MASTER BYPAS

MAS BYPAS

MAXIMUM

MAX

MEASURE(MENT)

MEAS

MECHANICAL

MECH

MECHANICAL FLOWDIAGRAM(SHEET)

P&ID

MEDICAL

MEDIC

MEDIUM

MED

METERING

MTR

MEZZANINE

MEZZ

MEZZANINE DECK

MEZZ DECK

MICROWAVE

MICROW

MINERAL OIL SYSTEM / LUBE OIL

MINOIL SYST / LUB OIL

MIPEG

MIPEG

MISCHELLANOUS

MISC

MIXER

MIX

MIXER INJECTION

MIX INJ

MODULE

MOD

MOISTURE

MOIST

MONITOR (ING)

MONIT

MONORAIL

MONOR

MOTOR CONTROL BREAKER

MCB

MOTOR CONTROL CENTER

MCC

MOTOR CONTROL CENTER CUBICLE

MCC CUB

MOTOR HYDRAULICMOTOR

HYDR

MUD MODUL

MUD MOD

NATURAL GAS LIQUIDS

NGL

NAVIGATION AID

NAV AID

NITROGEN

N2

NON HAZARDOUS OILY WATER DRAIN

DRAIN OILY WTR NON HAZ

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

230

Description

Abbreviation

NUMBER

NO

OPERATE (ED) (ING) (TOR) TION) (TIONAL)

OPER

OPERATOR STATION

OPER STATIO

ORIFICE

ORIF

OUTLET

OUTL

OUTSIDE

OUTS

OVER CEILING

O/CEIL

OVERHEAD

OVERH

PACKAGE (PACKING)

PKG

PAINTED

PAINT

PANEL

PANEL eller PNL

PEDESTAL

PEDESTAL

PERMANENT

PERM

PERSONAL COMPUTER

PC

PERSONEL / PERSON

PERS

PERSONEL AND GOODS ELEVATOR

LIFT

PIG LAUNCHER CRUDE OIL EXPORT

PIG LAUNC CRUDE OIL EXP

PIG LAUNCHER GAS EXPORT

PIG LAUNC GAS EXP

PIG RECEIVER ELDFISK GAS

PIG REC ELDFISK GAS

PIG RECEIVER ELDFISK OIL

PIG REC ELDFISK OIL

PIG RECEIVER GYDA/ULA GAS

PIG REC GYDA/ULA GAS

PIG RECEIVER GYDA/ULA OIL

PIG REC GYDA/ULA OIL

PIG RECEIVER TOR OIL/GAS

PIG REC TOR OIL/GAS

PIG RECEIVER VALHALL OIL

PIG REC VALH OIL

PIPE SUPPORT

PIPE SUP eller PS

PIPEHANDLER

PIPEHAND

PIPEHANDLER VERTICAL

PIPEHAND VERT

PIPELINE

PIPELN eller P/L

PIPELINE COMPRESSOR

COMP PIPELN

PIPING AND INSTRUMENTATION DRAWING

P&ID

PLATFORM

PLF

PNEUMATIC

PNEUM

POSITION

POS

POTABLE WATER

WTR POT

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module Description

Abbreviation

POWDER

POWD

POWER

PWR

POWER MANAGEMENT SYSTEM

PMS

POWER SUPPLY

PWR SUP

POWER TURBINE

PWR TURB

PREFABRICATE (TED) (TION)

PREFAB

PREPARE (D) (RATION)

PREP

PRESSURE

PRESS

PRESSURE INDICATOR

IND PRESS

PREVENTIVE MAINTENANCE

PM

PRIMARY

PRIM

PRIORITY SELECTED

PRI SEL

PROCEDURE

PROC

PROCESS CONTROL & SAFETY SYSTEM

PCSS

PROCESS CONTROL DATA ACQUISITION

PCDA

PROCESS MODULE

PROC MOD

PROCESS SHUTDOWN

PSD

PRODUCED (CTION)

PROD

PRODUCED WATER

WTR PROD

PRODUCTION COORDINATION UNIT

PCU

PRODUCTION LINE

PROD LINE

PRODUCTION MANIFOLD

PROD MANIF

PROGRAM

PROGR

PROGRAM LOGIC CONTROL

PLC

PROJECT

PROJ

PROJECT COMPLETION SYSTEM

PCS

PROTECT (TION)

PROTEC

PUBLIC ADDRESS

PA

PULSATION

PULS

PUMP

PMP

PUMP FIREWATER

PMP FIREWTR

PUMP SEAWATER

PMP SEAWTR

PUSH / PULL BUTTON

PB

QUANTITY

QTY

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

231

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

232

Description

Abbreviation

RACKER

RACK

RADAR TRANSPONDER

RADAR TRANSP

RADIO BEACON

RADIO BEACON

RECEIVER

RECEIV

RECEIVER AIR

RECEIV AIR

RECLAIMED OIL PUMP / SUMP

RECL OIL PMP / SUMP

RECOMMENDED SPARE PART LIST

RSPL

RECOMPRESSOR

RECOMPR

RED ESD

RESD

REDUCTION

REDUCT

REFERIGERATION (REFRIGERATOR)

REFRIG

REFRIGERATION EQUIPMENT

REFRIG EQUIP

REGENERATOR

REGEN

RELEASE

REL

REMOTE

REM

REMOTE INPUT/OUTPUT UNIT

REM I/O UNIT

REMOTE OPERATED VEHICLE

ROV

REMOTE TERMINAL UNIT

RTU

REPETER PANEL

PANEL REP

REPLACEMENT

REPLACEM

RESERVOIR MONITORING UNIT

RMU

RESISTANT

RESIST

RESOLVE

RES

ROPE LADDER

LADDER ROPE

RUN DOWN TANK

TANK RUNDWN

RUPTURE

RUPT

SAFETY SHOWER EYE BATH

SHOWER SAFETY EYE BATH

SCANNER

SCAN

SCAVENGER

SCAVENG

SCAVENGER FILTER

FILT SCAVENG

SCHEMATIC

SCHEM

SCHEMATIC DIAGRAM

SCHEM DIAG

SCHEMATIC DIAGRAM CORROTION

SCHEM DIAG CORR

SCHEMATIC DIAGRAM TRANSFORMER

SCHEM DIAG TRANSF

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

233

Description

Abbreviation

SCREW TRANSPORT

SCREW TRANSP

SCRUBBER

SCRUB

SCRUBBER FUEL

SCRUB FUEL

SEAWATER

SEA WTR

SEAWATER STRAINER A(B) BACKFLOW

STRAIN SEA WTR BACKFL

SECTION

SECT

SENSOR

SENS

SEPARATOR

SEP

SEPARATOR PRODUCTION

SEP PROD

SEQUENCE

SEQ

SERVICE STATION

SERV ST

SHAKER

SHAKE

SHUT DOWN

SD

SIDE POCKET MANDREL

SPM

SIGNAL

SIG

SINGLE LINE DIAGRAM

SINGLE LINE DIAG

SLIPS DRILLING COLLER

SLIPS DRILL COLLER

SLURRIFICATION UNIT

SLURRY UNIT

SLURRY INJECTION PUMP

PMP SLURRY INJ

SOCKET OUTLET

SOCKET OUTL

SOLENOID

SOL

SPECIAL (IFICATION)

SPEC

SPRINKLER

SPRINK

STABILISER

STAB

STAND BY

STBY

START / STOP

S/ST

STATION

STAT

STEAM

STEAM

STORAGE

STOR

STORAGE TANK

TANK STOR

STRESS ISOMETRIC

STRESS ISO

SUB SEA VALVE

SSIV

SUBSTRUCTURE

SUBSTRUCT

SUCTION

SUCT

SUPPLY

SUPPLY

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module

234

Description

Abbreviation

SURVIVAL

SURV

SURVIVAL BOAT

BOAT SURV

SWITCH

SWITCH

SWITCH BOARD

SWITCH BD

SWITCH GEAR

SWITCH G

SWITCH POSITION

SWITCH POS

SWITCH TEMPERATURE

SWITCH TEMP

SYNCHRONIZE (IOUS)

SYNC

SYSTEM

SYS

TECHNICAL

TECH

TELECOMMUNICATION

TELECOMM

TELEPHONE

TELPH

TELEPHONE OUTLET

TELPH OUTL

TEMPORARY

TEMP

TERMINAL (ATION)

TERM

TERMINAL AND EXTERNAL CONNECTION DIAGRAM

TERM & EXT CONN DIAG

TERMINAL BLOCK DIAGRAM

TERM BLOCK DIAG

TERMINATION EQUIPMENT ROOM

TER

TEST LINE

T-LINE

THRUST BEARING

THRU BRG

TONGS DRILLING PIPE

TONGS DRLG PIPE

TONGUE

TONG

TOPSIDE

TOPS

TOTALIZER

TOTALIZ

TRANSCEIVER

TRANSCEIV

TRANSCEIVER MICROWAVE

TRANSCEIV MICROW

TRANSFORM (ER) (ATOR)

TRANSF

TRANSMITT (ED) (ER)

TRANSM

TRANSMITTER POSITION

TRANSM POS

TRANSMITTER TEMPERATURE

TRANSM TEMP

TRANSMITTER VIBRATION

TRANSM VIBR

TRANSPONDER

TRANSPDR

TRANSPORT (ABLE)

TRANSP

TUBING

TUBING

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module Description

Abbreviation

TURBINE

TURB

TURBINE STEAM

TURB STEAM

ULTRA HIGH FREQUENCY

UHF

ULTRA VIOLET

UV

UNIHEAD

UNIHEAD

UNINTERUPTABLE POWER SUPPLY

UPS

UNIT OF MEASURE

UOM

UPSTREAM

UPSTR

UTILITY MODULE

UTILITY MOD

UTILITY STATION

UTIL ST

VACUUM

VACUUM

VAIRABLE SPEED DRIVE

VSD

VALVE

VLV

VALVE AUTO

VLV AUTO

VALVE AUTO ISOLATION

VLV AUTO ISOL

VALVE CHOKE

VLV CHOKE

VALVE CONTROL

VLV CTRL

VALVE DOWN HOLE SAFETY

VLV DHS

VALVE MANUAL

VLV MAN

VALVE MANUAL GAS LIFT

VLV MAN GASLIFT

VALVE MANUAL ISOLATION

VLV MAN ISOL

VALVE PNEUMATIC

VLV PNEUM

VALVE PRESSURE

VLV PRESS

VALVE PRESSURE CONTROL

VLV PRESS CTRL

VALVE PRESSURE SAFETY RELIEF

VLV PSV

VALVE SOLENOID

VLV SOLENOID

VENTILATE (TION) (ATOR)

VENT

VERY HIGH FREQUENCY

VHF

VERY LOW FREQUENCY

VLF

VESSEL PRESSURE

VESSEL PRESS

VIBRATION (TING)

VIBR

VISCOSITY

VISC

VISUAL DISPLAY UNIT

VDU

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

235

Total

236

Approved 11.09.2006

Page no.

Title

Abbreviations - Document/Drawing & Equipment Module Description

Abbreviation

VOLUME

VOL

WAREHOUSE

WHSE

WASHING

WASH

WASHING MACHINE

WASH MACH

WASTE HEAT RECOVERY UNIT

WHRU

WATER

WTR

WATER HOT

WTR HOT

WATER INJECTION

WTR INJ

WATERMAKER

WTRMAKER

WATERMIST

WTRMIST

WEATER DECK

W DECK

WELDING

WELD

WELLHEAD

WELLHEA

WELLHEAD CONTROL PANEL

WCP

WIRELINE

WIREL or WL

WITH

W/

WITHOUT

W/O

WORK BASKET

WORKBASK

WORKSHOP

W-SHOP

YELLOW EMERGENCY SHUTDOWN

YESD

Document / Revision No. 2169 / 09

Owner Director-Plant-and-Equipment-Information

236

Total

236

Approved 11.09.2006