$1$qKmP$rpSGZI6muUiJ.OZTzgvXk1
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/te http://www.cisco.com/techsupport chsupport Copyright (c) 2006 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c1841 platform with 131072 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled Readonly ROMMON initialized flash: CompactFlash not present. System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/te http://www.cisco.com/techsupport chsupport Copyright (c) 2006 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c1841 platform with 131072 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled Readonly ROMMON initialized flash: CompactFlash not present. System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/te http://www.cisco.com/techsupport chsupport Copyright (c) 2006 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c1841 platform with 131072 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled Readonly ROMMON initialized rommon 1 > confreg 0x2142 rommon 2 > reset System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/te http://www.cisco.com/techsupport chsupport Copyright (c) 2006 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c1841 platform with 131072 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled Readonly ROMMON initialized program load complete, entry point: 0x8000f000, size: 0xcb80 program load complete, entry point: 0x8000f000, size: 0xcb80 program load complete, entry point: 0x8000f000, size: 0x106e54c Self decompressing the image : ####################### ################################################ ########################## #
################################################################################ ####################################### [OK] Smart Init is enabled smart init is sizing iomem ID MEMORY_REQ 0X003AA110 0X00211000 0X00020000 0X000021B8
TYPE public buffer pools public particle pools Crypto module pools Onboard USB
If any of the above Memory Requirements are "UNKNOWN", you may be using an unsupported configuration or there is a software problem and system operation may be compromised. Allocating additional 6461988 bytes to IO Memory. PMem allocated: 118489088 bytes; IOMem allocated: 15728640 bytes Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706
Cisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 12.4(7d), RELE ASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Wed 03-Jan-07 19:39 by alnguyen Image text-base: 0x60089960, data-base: 0x61A00000 This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to
[email protected]. Cisco 1841 (revision 7.0) with 115712K/15360K bytes of memory. Processor board ID FCZ113120BZ 2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 31360K bytes of ATA CompactFlash (Read/Write) --- System Configuration Dialog --Would you like to enter the initial configuration dialog? [yes/no]: n Press RETURN to get started! *Oct 4 17:43:15.599: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0/0, changed state to down *Oct 4 17:43:15.611: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0/1, changed state to down *Oct 4 17:43:18.219: %SYS-5-RESTART: System restarted -Cisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 12.4(7d), RELE ASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Wed 03-Jan-07 19:39 by alnguyen *Oct 4 17:43:18.223: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start *Oct 4 17:43:19.815: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down *Oct 4 17:43:19.819: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down Router> Router> Router>enable Router#show startup-config Using 9441 out of 196600 bytes ! ! Last configuration change at 13:53:03 GMT Fri Nov 30 2007 by clarkad ! NVRAM config last updated at 13:53:04 GMT Fri Nov 30 2007 by clarkad ! version 12.4 no service pad service timestamps debug datetime localtime service timestamps log datetime localtime service password-encryption ! hostname FTIP003027868-v1-lb ! boot-start-marker boot-end-marker ! logging buffered 16384 debugging no logging console enable secret 5 $1$qKmP$rpSGZI6muUiJ.OZTzgvXk1 ! aaa new-model ! ! aaa authentication login default group tacacs+ line aaa authentication enable default group tacacs+ enable aaa authorization console aaa authorization config-commands
aaa authorization exec default group tacacs+ if-authenticated aaa authorization commands 15 default group tacacs+ none aaa accounting exec default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting connection default start-stop group tacacs+ aaa accounting system default start-stop group tacacs+ ! aaa session-id common ! resource policy ! clock timezone GMT 0 clock summer-time BST recurring last Sun Mar 1:00 last Sun Oct 2:00 no ip source-route ip cef ! ! ! ! no ip bootp server ip domain name bt.net ip name-server 194.72.6.57 ip name-server 194.73.82.242 ! ! username FTIP003027868 password 7 1323233B3B5C54797B767F6B637A ! ! ! interface Null0 no ip unreachables ! interface FastEthernet0/0 ip address 195.171.49.138 255.255.255.252 no ip redirects no ip unreachables rate-limit output 5000000 70710 70710 conform-action transmit exceed-action dro p speed 10 full-duplex no cdp enable ! interface FastEthernet0/1 ip address 213.122.168.81 255.255.255.240 no ip redirects no ip unreachables ip rip advertise 10 speed 100 full-duplex no cdp enable ! router rip version 2 timers basic 10 30 30 45 passive-interface FastEthernet0/0 network 213.122.168.0 default-information originate route-map core-network-reachable distribute-list 102 out FastEthernet0/1 distribute-list 103 in FastEthernet0/1 !
router bgp 2856 no synchronization bgp log-neighbor-changes bgp redistribute-internal bgp dampening redistribute connected route-map connected-to-bgp-filter redistribute static route-map static-to-bgp-filter neighbor 195.171.49.137 remote-as 2856 neighbor 195.171.49.137 password 7 0025035F05592E050D34637F2E35160F4027352D3D7D 7D neighbor 195.171.49.137 timers 10 30 neighbor 195.171.49.137 next-hop-self neighbor 195.171.49.137 send-community neighbor 195.171.49.137 prefix-list default-and-core-only in neighbor 195.171.49.137 prefix-list deny-default out neighbor 195.171.49.137 route-map reset-next-hop in no auto-summary ! ip route 0.0.0.0 0.0.0.0 FastEthernet0/0 195.171.49.137 250 ip route 213.122.168.64 255.255.255.240 FastEthernet0/1 213.122.168.82 tag 20 ! ! no ip http server no ip http secure-server ip tacacs source-interface FastEthernet0/0 ! ! ip prefix-list conn_sub_pref_route_no_export seq 5 permit 213.122.168.80/28 ! ip prefix-list core-network-route description Confirm access to core ip prefix-list core-network-route seq 5 permit 62.6.0.0/16 ! ip prefix-list default-and-core-only seq 5 permit 0.0.0.0/0 ip prefix-list default-and-core-only seq 10 permit 62.6.0.0/16 ip prefix-list default-and-core-only seq 15 deny 0.0.0.0/0 le 32 ! ip prefix-list deny-default description Block only default route ip prefix-list deny-default seq 5 deny 0.0.0.0/0 ip prefix-list deny-default seq 10 permit 0.0.0.0/0 le 32 logging trap notifications logging source-interface FastEthernet0/0 logging 194.74.74.218 access-list 9 permit 194.72.6.0 0.0.0.255 access-list 9 permit 194.74.75.0 0.0.0.255 access-list 9 permit 194.74.74.160 0.0.0.31 access-list 9 permit 194.74.74.192 0.0.0.31 access-list 9 permit 217.35.209.64 0.0.0.63 access-list 9 permit 217.35.209.192 0.0.0.31 access-list 17 permit 194.72.6.254 access-list 17 permit 194.74.77.191 access-list 17 permit 194.74.77.190 access-list 17 deny any access-list 25 permit 194.72.6.76 access-list 25 permit 194.72.6.66 access-list 25 permit 195.99.125.42 access-list 25 permit 194.72.6.117 access-list 25 permit 194.72.6.208 0.0.0.15 access-list 25 permit 194.74.74.160 0.0.0.31 access-list 25 permit 194.74.74.192 0.0.0.31 access-list 25 permit 217.35.209.64 0.0.0.63
access-list access-list access-list access-list access-list access-list access-list access-list access-list access-list access-list access-list access-list access-list access-list access-list snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server snmp-server
27 permit 194.72.6.0 0.0.0.255 27 permit 194.74.75.0 0.0.0.255 27 permit 194.74.74.160 0.0.0.31 27 permit 194.74.74.192 0.0.0.31 27 permit 217.35.209.64 0.0.0.63 27 permit 217.35.209.192 0.0.0.31 97 deny any 102 permit ip host 0.0.0.0 host 0.0.0.0 103 deny ip any any 198 permit tcp any any 198 permit udp any any 198 deny 53 any any 198 deny 55 any any 198 deny 77 any any 198 deny pim any any 198 permit ip any any community h6r3ig93y73fzpm1 RO 25 community gentjopwjcjgmspr RO 97 community cable-docsis RO 97 trap-source FastEthernet0/0 packetsize 4096 contact BTNet Helpdesk 0800-699897 enable traps snmp authentication linkdown linkup coldstart warmstart enable traps vrrp enable traps ds1 enable traps tty enable traps eigrp enable traps envmon enable traps flash insertion removal enable traps icsudsu enable traps isdn call-information enable traps isdn layer2 enable traps isdn chan-not-avail enable traps isdn ietf enable traps ds0-busyout enable traps ds1-loopback enable traps aaa_server enable traps atm subif enable traps bgp enable traps bulkstat collection transfer enable traps cnpd enable traps config-copy enable traps dsp card-status enable traps entity enable traps event-manager enable traps frame-relay enable traps frame-relay subif enable traps hsrp enable traps ipmobile enable traps ipmulticast enable traps msdp enable traps mvpn enable traps ospf state-change enable traps ospf errors enable traps ospf retransmit enable traps ospf lsa enable traps ospf cisco-specific state-change nssa-trans-change enable traps ospf cisco-specific state-change shamlink interface-old enable traps ospf cisco-specific state-change shamlink neighbor enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit snmp-server enable traps ospf cisco-specific lsa snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-messa ge snmp-server enable traps pppoe snmp-server enable traps cpu threshold snmp-server enable traps rsvp snmp-server enable traps rtr snmp-server enable traps l2tun session snmp-server enable traps vtp snmp-server host 194.74.74.215 h6r3ig93y73fzpm1 no cdp run route-map reset-next-hop permit 10 set ip next-hop 195.171.49.137 ! route-map core-network-reachable permit 10 match ip address prefix-list core-network-route ! route-map connected-to-bgp-filter deny 10 match interface FastEthernet0/0 ! route-map connected-to-bgp-filter permit 12 match ip address prefix-list conn_sub_pref_route_no_export match interface FastEthernet0/1 set metric 10 set origin igp set community no-export ! route-map static-to-bgp-filter permit 10 match interface Null0 match tag 1 set metric 30 set local-preference 1 set origin igp ! route-map static-to-bgp-filter permit 15 match tag 5 set metric 10 set origin igp ! route-map static-to-bgp-filter permit 20 match tag 10 set metric 10 set origin igp set community no-export ! route-map static-to-bgp-filter permit 25 match tag 15 set metric 20 set origin igp ! route-map static-to-bgp-filter permit 30 match tag 20 set metric 20 set origin igp set community no-export ! ! ! tacacs-server host 194.74.74.177
tacacs-server host 217.35.209.82 tacacs-server key 7 13161643070E542B3F777E63 ! control-plane ! ! banner exec ^C *** Beware to set FastEthernet Speed & Duplex settings on Commission of Service ***
^C banner motd ^C British Telecommunications plc WARNING: You have accessed a network device operated by BT. You are required to have a personal authorisation from the system administrator before you use this system and you are strictly limited to the use set out in that authorisation. Unauthorised access to or misuse of this system is prohibited and may constitute an offence under the Computer Misuse Act 1990. If you disclose any information obtained through this system without authority, BT may take appropriate action against you. This may include legal proceedings, prosecution and disciplinary action up to and including dismissal. ^C ! line con 0 exec-timeout 15 0 password 7 121A0047065807 line aux 0 access-class 97 in exec-timeout 15 0 password 7 130612421F5F0F line vty 0 4 session-timeout 15 access-class 9 in exec-timeout 15 0 password 7 0205010B1F5504 transport input telnet ! scheduler allocate 20000 1000 ntp clock-period 17178040 ntp access-group peer 17 ntp update-calendar ntp server 194.74.77.191 ntp server 194.74.77.190 end
