Config Leo
August 11, 2022 | Author: Anonymous | Category: N/A
Short Description
Download Config Leo...
Description
FLuxo de Configuraçã Configuração o MA5600T – OLT.
Data workflow
MA5600T
DATAPLAN para configuração: Item
Data
VLAN
Smart VLAN = 100 (Internet) Smart VLAN = X (VoIP) Smart VLAN = Y (IPTV)
Upstream port
0/19/ 0
CAR profile
Internet service
Index: x CAR: x Mbit/s
Priority: x
VoIP service
Index: x CAR: x Kbit/s
Priority: x
IPTV service
Index: 8 CAR: with no restriction Priority: 5 Index: 9
Vlan Gerencia
CAR: x Kbit/s Priority: x
Vlan standard 2 I.P 10.0.0.10 255.255.255.0 Gateway 10.0.0.1
Item
Data
ONT
ONT ID: 0 PORT ID :0 ONT SN: 323031312E4B8241 323031312E4B8241
GEM Port
T-CONT ID: 1 (Internet), 2 (VoIP), 3(IPTV) GEM Port ID: 128 (Internet), 150 (VoIP), 200 (IPTV)
Service Port: 0/1/0 port User-side VLAN: 10 (Internet), 150 (VoIP), 200 (IPTV) T-CONT Internet Index: 20 profile Type: type 1 Fixed bandwidth: 3072 Kbit/s
Item
VoIP
Index: X Type: type 1 Fixed bandwidth: 1024 Kbit/s
IPTV
Index: Y Type: type 1 Fixed bandwidth: 1024 Kbit/s
Data
ONT Port# FE 0 (Internet), FE1(IPTV),IPhost(VoIP)
ONT Configuration: - Introdução - Descrição Este guia foi criado para descrever o procedimento de configuração c onfiguração do Equipamento MA5600T. - Programas do Equipamento Device Software A versão de software do equipamento recomendada: MA5600T V200R008... - Versão do NMS Versão do NMS recomendada: N2000 BMSV200R011 1. Efetuando Login no Equipamento Username:root Password:admin MA5600T>enable MA5600T #configure MA5600T (config)# 2. Verificando as Placas MA5600T (config)#display board 0 --------------------------------------------------------------------------------------------------------------------------------------------SlotID BoardName Status SubType0 SubType1 --------------------------------------------------------------------------------------------------------------------------------------------0 1 H801GPBC Auto_find 2 3 4 5 6 7 8 9
Online/Offline
10 H801SCUL Active_normal 11 12 13 14 15 16 17 18 H801TOPA Auto_find NH1A 19 H801X1CA Auto_find 20 21 22 --------------------------------------------------------------------------------------------------------------------------------------------MA5600T(config)#
Caso as placas estejam em “Auto_find” executar o comando abaixo: MA5600T(config)#board confirm 0 ! FAULT MAJOR 2008-08-25 22:19:06 ALARM NAME :UP-Link port fault PARAMETERS :FrameID: 0, SlotID: 19, PortID: 0
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 1
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 2
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 3
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 4
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 5
MA5600T(config)#
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 6
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 7
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 8
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 9
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 10
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 11
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 12
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 13
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 14
MA5600T(config)# ! FAULT MAJOR 2008-08-25 22:19:07 ALARM NAME :T1/E1 LOS PARAMETERS :FrameID: 0, SlotID: 18, T1/E1 port-ID: 15
! EVENT MAJOR 2008-08-25 22:19:07 ALARM NAME :The Optical transceiver normal PARAMETERS :FrameID: 0, SlotID: 19, PortID: 0 MA5600T(config)#
! RECOVERY MAJOR 2008-08-25 22:19:07 ALARM NAME :UP-Link port recovery PARAMETERS :FrameID: 0, SlotID: 19, PortID: 0
MA5600T(config)# ! EVENT WARNING 2008-08-25 22:19:11 ALARM NAME :Normal system startup PARAMETERS :FrameID: 0, SlotID: 10
MA5600T(config)#
Checar o Status das placas após a confirmação da mesma. MA5600T(config)#display board 0 ---------------------------------------------------------------------------------------------------------------------------------------------SlotID BoardName Status SubType0 SubType1 --------------------------------------------------------------------------------------------------------------------------------------------0 1 H801GPBC Normal 2 3 4 5 6 7 8 9 10 H801SCUL Active_normal 11 12 13 14 15 16 17 18 H801TOPA Normal NH1A 19 H801X1CA Normal 20 21 22 -----------------------------------------------------------------------------------------------------------------------------------------------------
Online/Offline
3. Configurando a Vlan de Gerência MA5600T(config)#vlan 2 { vlantype|to to }:standard Command: vlan 2 standard MA5600T(config)#interface vlanif 2 MA5600T(config-if-vlanif2)#ip address 10.0.0.10 255.255.255.0 255.255.255.0 { |sub }: Command: ip address 10.0.0.10 255.255.255.0 MA5600T(config-if-vlanif2)#quit
Verificando Vlan de gerencia: MA5600T(config)#display vlan 2 { |to }: Command: display vlan 2 VLAN ID: 2 VLAN type: standard VLAN attribute: common VLAN description: Standard port number: 0 MA5600T(config)#display interface vlanif 2 vlanif2 current state : DOWN Line protocol current state : DOWN Description : HUAWEI, SmartAX Series, vlanif2 Interface The Maximum Transmit Unit is 1500 bytes Internet Address is 10.0.0.10/24 IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 0018-8244-6106 4. Configurando Uplink ( Permissão das Vlans criadas na interface Uplink ). MA5600T(config)#port vlan 2 0/19 0
5. Configurando a Rota Default.
O endereço final deste comando é o gateway enviado pela Telefonica(no exemplo 10.0.0.1): MA5600T(config)#ip route-static 0.0.0.0 0.0.0.0 10.0.0.1 { |preference }: Command: ip route-static 0.0.0.0 0.0.0.0 10.0.0.1
Checando a configuração executada: MA5600T(config)#display ip routing-table { |verbose|statistics|protocol|acl|ip-prefix|ip_addr }: Command: display ip routing-table Routing Tables: Public Destinations : 4 Routes : 4 Destination/Mask 127.0.0.0/8 127.0.0.1/32 192.168.100.0/24 192.168.100.40/32 192.168.100.40 /32
Proto
Pre
Direct 0 Direct 0 Direct 0 Direct 0
Cost 0 0 0 0
NextHop 127.0.0.1 127.0.0.1 192.168.100.40 127.0.0.1
Interface InLoopBack0 InLoopBack0 meth0 InLoopBack0
MA5600T(config)# 6. Configurando Parâmetros de Gerência MA5600T(config)# snmp-agent trap enable standard Command: snmp-agent trap enable standard MA5600T(config)#snmp-agent target-host trap address 10.18.70.24 security private { |mib-view }: Command: snmp-agent target-host trap address 10.18.70.24 securityname private
MA5600T(config)#snmp-agent community read public { |mib-view }: Command: snmp-agent community read public MA5600T(config)#snmp-agent community write private { |mib-view }: Command: snmp-agent community write private MA5600T(config)#snmp-agent trap source vlanif 2 Command: snmp-agent trap source vlanif 2 7. Gravando as Configurações MA5600T(config)# save { data|configuration| }:
Uplink configuration 8) Modo Global apartir do modo privilegiado. MA5600T# config MA5600T(config)#
Internet Service 9)
Criar Vlan Serviço. MA5600T(config)# vlan { vlanid|vlan vlanid|vlan-list|attrib }: 100 100 { vlantype|to }: smart smart Command: vlan 1025 smart 10) Adicionar Vlan Serviço a uma porta Uplink. MA5600T(config)# port vlan { vlanid vlanid |vlanlist }: 100 { frame/slot frame/slot | to { portlist }: 0 Command: port vlan 100 0/19 0
}:0/19
11) Seguindo o Data-Plan criar o ONT-Profile. MA5600T(config)# ont-profile add profile-id 20 profile-name OT925 { |profile-id }: Command: ont-profile add profile-name ot925 Press 'Q' or 'q' to quit input >
Number of uplink PON ports [1]:1
>
IP conf config ig mode< mode [1]:0 [1]:0
>
The type of MAC bridge bridge [1]:1
>
Number of GEM ports
>
Is UNI configurati configuration on concerned?
Number of POTS ports ports
>
Number of FE ports
[0]:4
>
Number of GE ports
[0]:1
>
TDM port type type [1]:1
>
TDM service type [1]:1
>
Number of TDM ports
>
Number of MOCA ports
>
Number of CATV ANI ports
>
Number of CATV UNI ports
>
Mapping mode 3-VLANID_802_1 pPRI> [1]:1
>
Number of T-CONTs
>
The type of fl flow ow control control [1]:1
>
Number of PQs in T-CONT 0
[4]:
>
Number of PQs in T-CONT 1
[4]:
>
Number of PQs in T-CONT 2
[4]:
>
Number of PQs in T-CONT 3
[4]:
>
Number of PQs in T-CONT 4
[4]:
>
Number of PQs in T-CONT 5
[4]:
>
Number of PQs in T-CONT 6
[4]:
>
Number of PQs in T-CONT 7
[4]:
[32]:32
[0]:0
[0]:4
[0]:0 [0]:0
[1]:8
Adding an ONT profile succeeded Profile-ID : 17 Profile-Name : ot925
[0]:0
12) Criar DBA obedecendo os valores fornecidos pelo data-Plan. MA5600T(config)# interface gpon 0/1 MA5600T(config-if-gpon-0/1)# MA5600T(config-if-gpon-0/1)# port { portid }:0 { range|ont-auto-update|ont-auto-find|fec|laser-switch }:ont-auto-find { switch} }::enable Command: port 1 ont-auto-find ont-auto-find enable MA5600T(config-if-gpon-0/1)# The command for port configuration is executed successfully, PORT = 0 13) Adicionar o ONT no OLT. MA5600T (config-if-gpon-0/1)#ont add 0 0 323031312 0 323031312E4B8241 E4B8241 sn-auth sn-auth profile-id 20 desc OT925 Number of ONTs that can be added: 1, success: 1 PortID :0, ONTID :0
14) Add the T-CONT profile. MA5600T (config)#dba-profile add { profile-id|profile-name|type1|type2|type3|type4|type5 }:profile-i
d { profile-id profile-id }:10 { type1|profile-name|type2|type3|type4|type5 }:profile-name { profile-name }:DBA-OT925 { type1|type2|type3|type4|type5 }:type1 { fix }:fix { fix-bandwidth }: 1024 Command: dba -profile add profile-id 10 profile-name OT925 type1 fix 1024
15) Amarrar o Ont-Profile com o DBA // To bind the T-CONT T-CONT profile to the T-CONT T-CONT for HSI.// MA5600T (config)#interface gpon 0/1 MA5600T (config-if-gpon-0/1)#tcont bind-profile { portid }:0 { ontid }:0 { tcont-list }:1 { profile-id|profile-nam profile-id|profile-name e }: profile-id { profile-id }:10 Command: tcont bind-profile 0 0 1 profile-id 10 MA5600T(config-if-gpon-0/1)# Binding a T-CONT profile succeeds 16) Add a GEM Port. MA5600T(config)# interface gpon 0/1 0/1
MA5600T(config-if-gpon-0/1)# gemport add { portid }:0 { gemport-id|gemportgemport-id|gemport-num num }: gemport-id { gemportlist gemportlist }:128 { service-type }:eth { |encrypt }: Command: gemport add 0 gemport-id 128 eth MA5600T(config-if-gpon-0/1)# Adding a GEM port succeeded 17) Amarrar ONT gemport com T-CONT.
MA5600T(config-if-gpon-0/1)# ont gemport bind { portid }:0 { ontid }:0 { gemport-list }:128 { tcont-id }:1 { priority-queue|car }:car car 2048 { averband }:2048 { maxband maxband }:2048 Command: ont gemport bind 0 0 128 1 car 2048 2048
18) ONT gemport map.
MA5600T(config-if-gpon-0/1)# ont gemport mapping { portid }:0 { ontid}:0 { gemport-id }:128 { fe|ge|moca|vlan|priority|iphost|e1 }:vlan { vlan-id }:10 { |priority }: Command: ont gemport mapping 0 0 128 vlan 10
19) Criar Vlan-user para porta serviço do Modem. MA5600T(config-if-gpon-0/1)# ont port { attribute|native-vlan| attribute|native-vlan|vlan vlan }: vlan { portid }:0 { ontid }:0 { iphost|fe|ge|moca }:fe { vlanid }:10 { ont-portlist }:0 Command: ont port vlan 0 0 fe 10 0 20) Adicionar a ONT port com a Vlan-User. MA5600T(config-if-gpon-0/1)# ont port native-vlan { portid }:0 { ontid }:0 { iphost|fe|ge|moca }:fe { ont-portid }:0 { vlan|priority vlan|priority }:vlan { vlanid }:10 { |priority }: Command: ont port native-vlan 0 0 fe 0 vlan 10 MA5600T(config-if-gpon-0/1)#
21) Adicionar service-port. MA5600(config)# service-port service-port vlan 100 gpon 0/1/0 gemport 128 { rx-cttr|multi-service< rx-cttr|multi-service K> }: multi-service { user-vlan|user-8021p }:user-vlan { untagged|user-vlanid }:10 { rx-cttr }:rx-cttr { rx-index }:6 { tx-cttr }:tx-cttr { tx-index tx-index }:6 Command: service-port serviceport vlan 1025 gpon 0/1/0 gemport 128 multi-service user-vlan 10 rx-cttr 6 tx-cttr 6 Add service virtual port successfully!
Configuração Configuraç ão MDU: (Supondo que o Serviço ja esteve criado no OLT incluindo o ont-profile do MDU para que o service funcione). 1) Configuração da Vlan de Gerência: MA5606T(config)#vlan 2 { vlantype|to vlantype|to }}:: standard Command: vlan 2 standard MA5606T(config)#interface vlanif 2 2) Endereçamento
da Vlan de Gerência.
MA5606T(config-if-vlanif2)#ip address 10.0.0.20 255.255.255.0 { |sub }: Command: ip address 10.0.0.20 255.255.255.0 2 55.255.255.0 MA5606T(config-if-vlanif2)#quit 3) Configuração
de Rota Default.
MA5606T(config)#ip route-static 0.0.0.0 0.0.0.0 10.0.0.1 { |preference }: Command: ip route-static 0.0.0.0 0.0.0.0 10.0.0.1
4) Parâmetros
de Gerência.
MA5606T(config)# snmp-agent trap enable standard Command: snmp-agent trap enable standard MA5606T(config)#snmp-agent target-host trap address 10.18.70.24 security private { |mib-view }: Command: snmp-agent target-host trap address 10.18.70.24 securityname private MA5606T(config)#snmp-agent community read public { |mib-view }: Command: snmp-agent community read public MA5606T(config)#snmp-agent community write private { |mib-view }: Command: snmp-agent community write private MA5606T(config)#snmp-agent trap source vlanif 2 Command: snmp-agent trap source vlanif 2 5) Vlan
de Serviço.
MA5606T(config)#vlan 100 { vlantype|to vlantype|to }}:: smart Command: vlan 100 smart 6) Permissão
para Vlan 100 a interface de Uplink.
MA5606T(config)#port vlan 2 0/1 0 MA5606T(config)#port vlan 100 0/1 0 7) Service
Port
MA5606T(config)# service-port 1 vlan 100 vdsl mode ptm 0/3/17 multi-service user-vlan
81 rx-cttr 6 tx-cttr 6
View more...
Comments
