Clevo or Sager notebook = P150SM-A service manual
September 2, 2017 | Author: deejjjaaaa | Category: N/A
Short Description
Clevo or Sager notebook = P150SM-A service manual...
Description
P150SM-A / P151SM-A / P151SM1-A SERVICE MANUAL
Preface
Notebook Computer P150SM-A / P151SM-A / P151SM1-A Service Manual Preface
I
Preface
Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes.
Preface
Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Version 1.0 March 2014
Trademarks Intel and Intel Core are trademarks of Intel Corporation. Windows® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks and/or registered trademarks of their respective companies.
II
Preface
About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic information for servicing and/or upgrading components of the P150SM-A / P151SM-A / P151SM1-A series notebook PC. The following information is included: Chapter 1, Introduction, provides general information about the location of system elements and their specifications. Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade elements of the system.
Preface
Appendix A, Part Lists Appendix B, Schematic Diagrams Appendix C, Updating the FLASH ROM BIOS
III
Preface
IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to persons when using any electrical equipment:
Preface
1. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. 5. This product is intended to be supplied by a Listed Power Unit with an AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19.5V, 9.2A / 19V, 9.5A (180 Watts for P150SM-A & P151SM-A) / 19.5V, 6.15A (120 Watts for P151SM1-A) minimum AC/DC Adapter.
CAUTION This Computer’s Optical Device is a Laser Class 1 Product
IV
Preface
Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: 1.
Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged. Do not expose the computer to any shock or vibration.
2.
Do not place anything heavy on the computer.
Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating element. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged. Do not leave it in a place where foreign matter or moisture may affect the system.
Don’t use or store the computer in a humid environment.
Do not place the computer on any surface which will block the vents.
Preface
Do not expose it to excessive heat or direct sunlight.
3.
Do not place it on an unstable surface.
Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work. Remember to periodically save your data as data may be lost if the battery is depleted. Do not turn off the power until you properly shut down all programs.
Do not turn off any peripheral devices when the computer is on.
Do not disassemble the computer by yourself.
Perform routine maintenance on your computer.
V
Preface 4.
5.
Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data. Take care when using peripheral devices.
Removal Warning
Use only approved brands of peripherals.
Preface
When removing any cover(s) and screw(s) for the purposes of device upgrade, remember to replace the cover(s) and screw(s) before restoring power to the system. Also note the following when the cover is removed:
Power Safety
•
The computer has specific power requirements:
•
Hazardous moving parts. Keep away from moving fan blades
• • •
Power Safety Warning Before you undertake any upgrade procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines and power cord). You must also remove your battery in order to prevent accidentally turning the machine on.
VI
• • •
Unplug the power cord before attaching peripheral devices.
Only use a power adapter approved for use with this computer. Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are unsure of your local power specifications, consult your service representative or local power company. The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one. When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire. Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices. Before cleaning the computer, make sure it is disconnected from any external power supplies. Do not plug in the power cord if you are wet.
Do not use the power cord if it is broken.
Do not place heavy objects on the power cord.
Preface
Battery Precautions • Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer. • Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire. • Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode. • Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service personnel. • Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries may explode or leak if exposed to fire, or improperly handled or discarded. • Keep the battery away from metal appliances. • Affix tape to the battery contacts before disposing of the battery. • Do not touch the battery contacts with your hands or metal objects.
Battery Guidelines
Preface
The following can also apply to any backup batteries you may have. • If you do not use the battery for an extended period, then remove the battery from the computer for storage. • Before removing the battery for storage charge it to 60% - 70%. • Check stored batteries at least every 3 months and charge them to 60% - 70%.
Battery Disposal The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used battery according to the manufacturer’s instructions.
Battery Level Click the battery icon in the taskbar to see the current battery level and charge status. A battery that drops below a level of 10% will not allow the computer to boot up. Make sure that any battery that drops below 10% is recharged within one week.
VII
Preface
Related Documents You may also need to consult the following manual for additional information: User’s Manual on Disc This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup program. It also describes the installation and operation of the utility programs provided with the notebook PC.
System Startup Remove all packing materials. Place the computer on a stable surface. Insert the battery and tighten the screws. Securely attach any peripherals you want to use with the computer (e.g. keyboard and mouse) to their ports. 5. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter. 6. Use one hand to raise the lid/LCD to a comfortable viewing angle (do not to exceed 135 degrees); use the other hand (as illustrated in Figure 1) to support the base of the computer (Note: Never lift the computer by the lid/LCD). 7. Press the power button to turn the computer “on”.
Preface
1. 2. 3. 4.
VIII
135
Figure 1 Opening the Lid/LCD/ Computer with AC/DC Adapter Plugged-In
Preface
Contents Introduction ..............................................1-1 Overview .........................................................................................1-1 External Locator - Top View with LCD Panel Open ......................1-4 External Locator - Front & Right side Views .................................1-5 External Locator - Left Side & Rear View .....................................1-6 External Locator - Bottom View .....................................................1-7 Mainboard Overview - Top (Key Parts) .........................................1-8 Mainboard Overview - Bottom (Key Parts) ....................................1-9 Mainboard Overview - Top (Connectors) .....................................1-10 Mainboard Overview - Bottom (Connectors) ...............................1-11
Disassembly ...............................................2-1
Part Lists ..................................................A-1 Part List Illustration Location ........................................................ A-2 Top with Fingerprint ...................................................................... A-3 Top without Fingerprint ............................................................... A-4 Bottom (N15E-GX) ....................................................................... A-5 Bottom (N15P-GX) ....................................................................... A-6 LCD ............................................................................................... A-7 COMBO ......................................................................................... A-8 DVD-Dual Drive ............................................................................ A-9 HDD ............................................................................................. A-10 HDD Caddy ................................................................................. A-11
Schematic Diagrams................................. B-1 Block Diagram ................................................................................B-2 Processor 1/7 ...................................................................................B-3 Processor 2/7 ...................................................................................B-4 Processor 3/7 ...................................................................................B-5 Processor 4/7 ...................................................................................B-6 Processor 5/7 ...................................................................................B-7 Processor 6/7 ...................................................................................B-8 Processor 7/7 ...................................................................................B-9 DDR3 CHA SO-DIMM_0 ............................................................B-10 DDR3 CHA SO-DIMM_1 ............................................................B-11 DDR3 CHB SO-DIMM_1 ............................................................B-12 DDRIII CHB SO-DIMM_0 ..........................................................B-13 MXM PCI-E .................................................................................B-14 Panel, Inverter, CRT .....................................................................B-15 PS8625 ..........................................................................................B-16 1394a_XIO2221 ...........................................................................B-17 IX
Preface
Overview .........................................................................................2-1 Maintenance Tools ..........................................................................2-2 Connections .....................................................................................2-2 Maintenance Precautions .................................................................2-3 Disassembly Steps ...........................................................................2-4 Removing the Battery ......................................................................2-5 Removing the Hard Disk Drive .......................................................2-6 Inserting the Hard Disk Into the HDD Bay .....................................2-9 Removing the SSD ........................................................................2-10 Removing the Optical (CD/DVD) Device ....................................2-11 Removing the Hard Disk from the Secondary HDD Bay .............2-13 Removing the Primary System Memory (RAM) .........................2-14 Removing the System Memory (RAM) from Under the Keyboard .......................................................................................2-16 Removing and Installing the Processor .........................................2-18 Removing the Wireless LAN Module ...........................................2-21 Wireless LAN, Combo, 3G & LTE Module Cables .....................2-22 Removing the MSATA Module ....................................................2-23
Removing and Installing the Video Card ..................................... 2-24
Preface
Preface Display Port .................................................................................. B-18 HDMI ........................................................................................... B-19 Lynix Point 1/9 ............................................................................. B-20 Lynix Point 2/9 ............................................................................. B-21 Lynix Point3/9 .............................................................................. B-22 Lynix Point 4/9 ............................................................................ B-23 Lynix Point 5/9 ............................................................................. B-24 Lynix Point 6/9 ............................................................................. B-25 Lynix Point 7/9 ............................................................................. B-26 Lynix Point 8/9 ............................................................................. B-27 Lynix Point 9/9 ............................................................................. B-28 USB+eSATA, USB Charging ...................................................... B-29 USB 2.0, CCD, Mini PCIE, LID .................................................. B-30 LED, Hotkey, LID SW, Fan ......................................................... B-31 RJ 45 ............................................................................................. B-32 Codec Realtek ALC892 ............................................................... B-33 APA2607-TPA2008D2 ................................................................ B-34 KBC-ITE IT8587A ...................................................................... B-35 Backlight Keyboard ...................................................................... B-36 mSATA, FAN, TP, FP, MULTI-CON ......................................... B-37 Card Reader RTL8411 ................................................................. B-38 USB 3.0 ........................................................................................ B-39 DDR 1.35V/0.75VS PCH 1.5V .................................................... B-40 VDD3, VDD5 ............................................................................... B-41 5V, 5VS, 3.3V, 3.3VS, 1.5VS ...................................................... B-42 Power 1.05VS ............................................................................... B-43 LED 5V ........................................................................................ B-44 Power V-Core 1 ............................................................................ B-45 AC_In, Charger ............................................................................ B-46 TPM .............................................................................................. B-47 Audio Board ................................................................................. B-48 P150 ODD Board ......................................................................... B-49 X
P150 Click Board ..........................................................................B-50 Power LED Board .........................................................................B-51 Function LED Board .....................................................................B-52 Indicatory LED Board ..................................................................B-53 P170 2nd HDD Board ...................................................................B-54 Power & LED Board ....................................................................B-55 P170 Click Board ..........................................................................B-56 P150 Fingerprint Board ................................................................B-57 P170 Fingerprint Board ................................................................B-58 P150 2nd HDD Board ...................................................................B-59 Indicatory LED Board ..................................................................B-60 Function LED Board .....................................................................B-61 Mini-DP ........................................................................................B-62 2nd mSATA Board .......................................................................B-63 Power on / S4 Resume Seq. ..........................................................B-64 S3 Resume Seq. ............................................................................B-65 Into S3 Sequence ..........................................................................B-66 Into S4 Sequence ..........................................................................B-67
Updating the FLASH ROM BIOS......... C-1
Introduction
Chapter 1: Introduction Overview This manual covers the information you need to service or upgrade the P150SM-A / P151SM-A / P151SM1-A series notebook computer. Information about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual. Information about drivers (e.g. VGA & audio) is also found in User’s Manual. That manual is shipped with the computer. Operating systems (e.g. Windows 8, etc.) have their own manuals as do application software (e.g. word processing and database programs). If you have questions about those programs, you should consult those manuals.
1.Introduction
The P150SM-A / P151SM-A / P151SM1-A series notebook is designed to be upgradeable. See Disassembly on page 2 - 1 for a detailed description of the upgrade procedures for each specific component. Please note the warning and safety information indicated by the “” symbol. The balance of this chapter reviews the computer’s technical specifications and features.
Overview 1 - 1
Introduction
Specifications Latest Specification Information
1.Introduction
The specifications listed here are correct at the time of sending them to the press. Certain items (particularly processor types/speeds) may be changed, delayed or updated due to the manufacturer's release schedule. Check with your service center for more details.
CPU The CPU is not a user serviceable part. Accessing the CPU in any way may violate your warranty.
Processor Options
Security
P150SM-A / P151SM-A:
Security (Kensington® Type) Lock Slot
Intel® Core™ i7 Processor i7-4930MX (3.00GHz) 8MB L3 Cache, 22nm, DDR3L-1600MHz, TDP 57W
BIOS Password (Factory Option) Fingerprint Reader Module (Factory Option) TPM 1.2
All Models: Intel® Core™ i7 Processor
Storage
i7-4900MQ (2.80GHz) 8MB L3 Cache, 22nm, DDR3L-1600MHz, TDP 47W
i7-4800MQ (2.70GHz), i7-4700MQ (2.40GHz) 6MB L3 Cache, 22nm, DDR3L-1600MHz, TDP 47W i7-4600M (2.90GHz) 4MB L3 Cache, 22nm, DDR3L-1600MHz, TDP 37W Intel® Core™ i5 Processor i5-4330M (2.80GHz), i5-4300M (2.60GHz), i5-4200M (2.50GHz) 3MB L3 Cache, 22nm, DDR3L-1600MHz, TDP 37W Intel® Core™ i3 Processor i3-4100M (2.50GHz), i3-4000M (2.40GHz) 3MB L3 Cache, 22nm, DDR3L-1600MHz, TDP 37W
BIOS AMI BIOS (48Mb SPI Flash-ROM)
Video Adapter P150SM-A / P151SM-A: Intel® Integrated GPU and NVIDIA® Discrete GPU
LCD
Supports Microsoft Hybrid Graphics
15.6" (39.62cm) FHD LCD
Intel Integrated GPU Intel HD Graphics 4600
Memory Four 204 Pin SO-DIMM Sockets Supporting DDR3L 1600MHz Memory (The real memory operating frequency depends on the FSB of the processor.) Memory Expandable up to 16GB/32GB Note: Four SO-DIMMs are only supported by Quad-Core CPUs; Dual-Core CPUs support two SO-DIMMs maximum
Core Logic Intel® HM87 Express Chipset
1 - 2 Overview
(Factory Option) One 12.7mm(h) Optical Device Type Drive (Super Multi Drive/Blu-Ray Combo Drive/Blu-Ray Writer Drive) One Changeable 2.5" (6cm) 9.5mm (h) SATA (Serial) Hard Disk Drive/SSD (Factory Option) 9.5mm 2nd HDD caddy (Factory Option) Two mSATA Solid State Drives (SSD) supporting RAID Level 0/1
Dynamic Frequency (Intel Dynamic Video Memory Technology for up to 1.7GB) Microsoft DirectX® 11 Compatible NVIDIA® Discrete GPU NVIDIA® GeForce GTX 860M PCIe Video Card 4GB GDDR5 Video RAM on board Microsoft DirectX® 11.1 Compatible NVIDIA® GeForce GTX 870M PCIe Video Card 6GB GDDR5 Video RAM on board Microsoft DirectX® 11.1 Compatible NVIDIA® GeForce GTX 880M PCIe Video Card 8GB GDDR5 Video RAM on board Microsoft DirectX® 11.1 Compatible
Introduction P151SM1-A: Intel® Integrated GPU and NVIDIA® Discrete GPU Supports Microsoft Hybrid Graphics Intel HD Graphics 4600 Dynamic Frequency (Intel Dynamic Video Memory Technology for up to 1.7GB) Microsoft DirectX® 11 Compatible NVIDIA® Discrete GPU NVIDIA® GeForce GTX 860M PCIe Video Card 2GB GDDR5 Video RAM on board Microsoft DirectX® 11.1 Compatible
Pointing Device Keyboard P150SM-A: Illuminated Full-size “WinKey” keyboard (with numeric keypad) P151SM-A / P151SM1-A: Full-size “WinKey” keyboard (with numeric keypad)
Audio High Definition Audio Compliant Interface S/PDIF Digital Output Two Speakers One Sub Woofer Built-In Microphone Sound Blaster Audio ANSP™ 3D sound technology on headphone output
Mini-Card Slots Slot 1 for WLAN Module or Combo WLAN and Bluetooth Module Slots 2 & 3 for mSATA SSD
Environmental Spec
Embedded Multi-In-1 Push-Push Card Reader
Temperature
MMC (MultiMedia Card) / RS MMC SD (Secure Digital) / Mini SD / SDHC/ SDXC MS (Memory Stick) / MS Pro / MS Duo
Interface Two USB 3.0 Ports (Including one AC/DC Powered USB port) One USB 2.0 Port One eSATA Port (USB 3.0 Port Combined) One HDMI-Out Port One DisplayPort (1.1a) One Mini DisplayPort One S/PDIF Out Jack One Headphone/Speaker-Out Jack One Microphone-In Jack One Line-In Jack One Mini-IEEE1394a Port One RJ-45 LAN Jack One DC-In Jack
Operating: 5°C - 35°C Non-Operating: -20°C - 60°C Relative Humidity Operating: 20% - 80% Non-Operating: 10% - 90%
Power Removable 8-cell Smart Lithium-Ion Battery Pack, 76.96WH Full Range AC/DC Adapter AC Input: 100 - 240V, 50 - 60Hz
P150SM-A / P151SM-A: DC Output: 19.5V, 9.2A/ 19V, 9.5A (180W)
P151SM1-A: DC Output: 19.5V, 6.15A (120W)
Dimensions & Weight 376mm (w) * 256mm (d) * 35 - 43mm (h) Around 3.1kg with Battery and ODD
Note: External 7.1CH Audio Output Supported by Headphone, Microphone, Line-In and S/PDIF Out Jacks
Communication Built-In Gigabit Ethernet LAN 2,0M FHD PC Camera Module WLAN/ Bluetooth Half Mini-Card Modules: (Factory Option) Intel® Centrino® Ultimate-N 6300 Wireless LAN (802.11a/g/n) (Factory Option) Intel® Wireless-AC 7260 Wireless LAN (802.11a/c) + Bluetooth 4.0 (Factory Option) Intel® Wireless-N 7260 Wireless LAN (802.11b/g/n) + Bluetooth 4.0 (Factory Option) Wireless LAN (802.11b/g/n) + Bluetooth 4.0 (Factory Option) Wireless LAN (802.11a/b/g/n) + Bluetooth 4.0
Overview 1 - 3
1.Introduction
Built-in Touchpad (scrolling key functionality integrated)
Card Reader
Introduction Figure 1
External Locator - Top View with LCD Panel Open
1.Introduction
Top View 1. Built-In PC Camera 2. PC Camera LED 3. Built-In Microphone 4. LCD 5. Speakers 6. Power Button 7. LED Lock Indicators 8. LED Status Indicators 9. Keyboard (P150SM supports an Illuminated Keyboard) 10. TouchPad and Buttons 11. Fingerprint Reader (Optional)
2
3
1
4
Note that the Touchpad and Buttons has a valid operational area indicated within the red dotted lines above.
7
6
5
5
9
10 11
1 - 4 External Locator - Top View with LCD Panel Open
8
Introduction
External Locator - Front & Right side Views
Figure 2 Front Views 1. LED Power Indicators
Front
1
Right
1
3 2
4
5
6
7
8
1. Optical Device Drive Bay 2. Emergency Eject Hole 3. Headphone Jack 4. Microphone Jack 5. S/PDIF-Out Jack 6. Line-In Jack 7. USB 2.0 Port 8. Security Lock Slot
External Locator - Front & Right side Views 1 - 5
1.Introduction
Figure 3 Right Side Views
Introduction
External Locator - Left Side & Rear View Figure 4 Left Side View
Left
1
2
3
5
4
3
1.Introduction
1. Mini-IEEE 1394a Port 2. RJ-45 LAN Jack 3. USB 3.0 Ports 4. Combined eSATA/ Powered USB 3.0 Port 5. Multi-in-1 Card Reader
Figure 5 Rear View 1. 2. 3. 4. 5.
Vent/Fan Intake Display Port HDMI-Out Port Mini Display Port DC-In Jack
Rear
1
1 - 6 External Locator - Left Side & Rear View
2
3
4
5
1
Introduction
External Locator - Bottom View
Figure 6 Bottom View 1. Vent 2. Component Bay Cover 3. Sub Woofer 4. HDD Bay 5. Battery
2
1
1.Introduction
3
1
1
1
4 5
Overheating To prevent your computer from overheating make sure nothing blocks the vent/fan intakes while the computer is in use.
External Locator - Bottom View 1 - 7
Introduction Figure 7
Mainboard Overview - Top (Key Parts)
Mainboard Top Key Parts
1.Introduction
1. Platform Controller Hub 2. Audio Codec 3. KBC ITE IT8587
1 2
3
1 - 8 Mainboard Overview - Top (Key Parts)
Introduction
Mainboard Overview - Bottom (Key Parts)
Figure 8 Mainboard Bottom Key Parts
1
2
3 5 4
Mainboard Overview - Bottom (Key Parts) 1 - 9
1.Introduction
1. VGA-Card Connector 2. CPU Socket (no CPU installed) 3. Memory Slots DDR3L SO-DIMM (Primary) 4. Hard Disk Connector 5. MSATA Connector
Introduction Figure 9
Mainboard Overview - Top (Connectors)
1.Introduction
Mainboard Top Connectors 1. USB 3.0 Port / e-SATA 2. Multi-in-1 Card Reader 3. KB LED Connector 4. TP LED Cable Connector 5. LED 4 Cable Connector 6. TouchPad Cable Connector 7. MSATA Cable Connector 8. LED 3 Cable Connector 9. Keyboard Cable Connector 10. Audio Cable Connector 11. LCD Cable Connector 12. eDP Cable Connector
12 11
10
3
1
5 9
2 4
6 7
1 - 10 Mainboard Overview - Top (Connectors)
8
Introduction
Mainboard Overview - Bottom (Connectors)
Figure 10 Mainboard Bottom Connectors
4
3
2
1 10
9
7
8
DC-In Jack Mini Display Port HDMI-Out Port Display Port VGA Fan Cable Connector 6. Sub Woofer Cable Connector 7. CPU Fan Cable Connector 8. USB 3.0 Ports 9. RJ-45 LAN Jack 10. Mini-IEEE 1394a Port
5 6
Mainboard Overview - Bottom (Connectors) 1 - 11
1.Introduction
8
1. 2. 3. 4. 5.
1.Introduction
Introduction
1 - 12
Disassembly
Chapter 2: Disassembly Overview This chapter provides step-by-step instructions for disassembling the P150SM-A / P151SM-A / P151SM1-A series notebook’s parts and subsystems. When it comes to reassembly, reverse the procedures (unless otherwise indicated). We suggest you completely review any procedure before you take the computer apart.
To make the disassembly process easier each section may have a box in the page margin. Information contained under the figure # will give a synopsis of the sequence of procedures involved in the disassembly procedure. A box with a lists the relevant parts you will have after the disassembly process is complete. Note: The parts listed will be for the disassembly procedure listed ONLY, and not any previous disassembly step(s) required. Refer to the part list for the previous disassembly procedure. The amount of screws you should be left with will be listed here also.
Information
A box with a will also provide any possible helpful information. A box with a contains warnings. An example of these types of boxes are shown in the sidebar.
Warning
Overview 2 - 1
2.Disassembly
Procedures such as upgrading/replacing the RAM, optical device and hard disk are included in the User’s Manual but are repeated here for your convenience.
Disassembly NOTE: All disassembly procedures assume that the system is turned OFF, and disconnected from any power supply (the battery is removed too).
Maintenance Tools The following tools are recommended when working on the notebook PC:
2.Disassembly
• • • • • •
M3 Philips-head screwdriver M2.5 Philips-head screwdriver (magnetized) M2 Philips-head screwdriver Small flat-head screwdriver Pair of needle-nose pliers Anti-static wrist-strap
Connections Connections within the computer are one of four types:
2 - 2 Overview
Locking collar sockets for ribbon connectors
To release these connectors, use a small flat-head screwdriver to gently pry the locking collar away from its base. When replacing the connection, make sure the connector is oriented in the same way. The pin1 side is usually not indicated.
Pressure sockets for multi-wire connectors
To release this connector type, grasp it at its head and gently rock it from side to side as you pull it out. Do not pull on the wires themselves. When replacing the connection, do not try to force it. The socket only fits one way.
Pressure sockets for ribbon connectors
To release these connectors, use a small pair of needle-nose pliers to gently lift the connector away from its socket. When replacing the connection, make sure the connector is oriented in the same way. The pin1 side is usually not indicated.
Board-to-board or multi-pin sockets
To separate the boards, gently rock them from side to side as you pull them apart. If the connection is very tight, use a small flat-head screwdriver - use just enough force to start.
Disassembly
Maintenance Precautions The following precautions are a reminder. To avoid personal injury or damage to the computer while performing a removal and/or replacement job, take the following precautions:
Power Safety Warning Before you undertake any upgrade procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines and power cord). You must also remove your battery in order to prevent accidentally turning the machine on.
Cleaning Do not apply cleaner directly to the computer, use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.
Overview 2 - 3
2.Disassembly
1. Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other components could be damaged. 2. Don't overheat it. Note the proximity of any heating elements. Keep the computer out of direct sunlight. 3. Avoid interference. Note the proximity of any high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage components and/or data. You should also monitor the position of magnetized tools (i.e. screwdrivers). 4. Keep it dry. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged. 5. Be careful with power. Avoid accidental shocks, discharges or explosions. •Before removing or servicing any part from the computer, turn the computer off and detach any power supplies. •When you want to unplug the power cord or any cable/wire, be sure to disconnect it by the plug head. Do not pull on the wire. 6. Peripherals – Turn off and detach any peripherals. 7. Beware of static discharge. ICs, such as the CPU and main support chips, are vulnerable to static electricity. Before handling any part in the computer, discharge any static electricity inside the computer. When handling a printed circuit board, do not use gloves or other materials which allow static electricity buildup. We suggest that you use an anti-static wrist strap instead. 8. Beware of corrosion. As you perform your job, avoid touching any connector leads. Even the cleanest hands produce oils which can attract corrosive elements. 9. Keep your work environment clean. Tobacco smoke, dust or other air-born particulate matter is often attracted to charged surfaces, reducing performance. 10. Keep track of the components. When removing or replacing any part, be careful not to leave small parts, such as screws, loose inside the computer.
Disassembly
Disassembly Steps The following table lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM THE DISASSEMBLY STEPS IN THE ORDER INDICATED.
To remove the Battery: 1. Remove the battery
page 2 - 5
2.Disassembly
To remove and install the HDD: 1. Remove the battery 2. Remove the HDD 3. Install the HDD
page 2 - 5 page 2 - 6 page 2 - 9
To remove the SSD: 1. Remove the battery 2. Remove the HDD 3. Remove the SSD
page 2 - 5 page 2 - 6 page 2 - 10
1. Remove the battery 2. Remove the keyboard 3. Remove the system memory
page 2 - 5 page 2 - 14 page 2 - 17
To remove and install the Processor: 1. 2. 3. 4.
Remove the battery Remove the system memory Remove the processor Install the processor
page 2 - 5 page 2 - 14 page 2 - 18 page 2 - 20
To remove the WLAN Module:
To remove the Optical Device: 1. Remove the battery 2. Remove the Optical device
To remove the System Memory under the Keyboard:
page 2 - 5 page 2 - 11
1. Remove the battery 2. Remove the keyboard 3. Remove the wireless LAN
To remove the HDD from the Secondary Bay:
To remove the MSATA Module:
1. Remove the battery 2. Remove the HDD
1. Remove the battery 2. Remove the MSATA
page 2 - 5 page 2 - 13
page 2 - 5 page 2 - 14 page 2 - 21
page 2 - 5 page 2 - 23
To remove the Primary System Memory:
To remove and install the Video Card:
1. Remove the battery 2. Remove the system memory
1. Remove the battery 2. Remove the video card 3. Install the video card
2 - 4 Disassembly Steps
page 2 - 5 page 2 - 14
page 2 - 5 page 2 - 24 page 2 - 26
Disassembly
Removing the Battery 1. 2. 3. 4. 5.
Turn the computer off, and turn it over. Slide the latch 1 in the direction of the arrow (Figure 1a). Slide the latch 2 in the direction of the arrow, and hold it in place (Figure 1a). Slide the battery in the direction of the arrow 3 . Lift the battery 64 out of the compartment (Figure 1c).
a.
Figure 1 Battery Removal a. Slide the latch and hold in place. b. Lift the battery up toward the direction of the arrow. c. Lift the battery out.
c.
2.Disassembly
1
2
b. 4 3
4. Battery
Removing the Battery 2 - 5
Disassembly
Figure 2 HDD Assembly Removal a. Locate the HDD bay cover and remove the screws. b. Remove the hard disk bay cover by levering the cover at point 3 .
Removing the Hard Disk Drive The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm (h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in Chapter 4 of the User’s Manual) when setting up a new hard disk.
Hard Disk Upgrade Process 1. Turn off the computer, and remove the battery (page 2 - 5). 2. Locate the hard disk bay cover and remove screws 1 - 2 (Figure 2a). 3. Remove the hard disk bay cover by levering the cover at point 3 (Figure 2b).
2.Disassembly
a.
b. 3
1
2 3
HDD System Warning New HDD’s are blank. Before you begin make sure: You have backed up any data you want to keep from your old HDD.
• 2 Screws
You have all the CD-ROMs and FDDs required to install your operating system and programs. If you have access to the internet, download the latest application and hardware driver updates for the operating system you plan to install. Copy these to a removable medium.
2 - 6 Removing the Hard Disk Drive
Disassembly 4. 5. 6. 7.
Slide the HDD assembly in the direction of the arrow 4 (Figure 3c). Remove the hard disk assembly 65 (Figure 3d). Remove screws 6 & 7 and the insulation plate 68 (Figure 3e). Reverse the process to install a new hard disk (do not forget to replace all the screws and covers).
c.
d.
e.
Figure 3 HDD Assembly Removal (cont’d.)
7
4
8
c. Slide the HDD assembly in the direction of the arrow. d. Remove the hard disk assembly. e. Remove the screws and the insulation plate.
2.Disassembly
6
5
5. HDD 8. HDD Insulation Plate
• 2 Screws
Removing the Hard Disk Drive 2 - 7
Disassembly Hard Disk Size Note (Foam Rubber Insert)
Note that the hard disks pictured on the following pages are all 9.5mm(H) hard disk drives. In some cases 7mm(H) hard disk drives will be installed.
2.Disassembly
Figure 4 Foam Rubber Insert for 7mm(H) HDDs
HDD-1
• If you are replacing a 9.5mm(H) HDD with a 7mm(H) HDD then insert the foam rubber insert. • If you are replacing a 7mm(H) HDD with a 9.5mm(H) HDD then remove the foam rubber insert.
2 - 8 Removing the Hard Disk Drive
Disassembly
Inserting the Hard Disk Into the HDD Bay
Figure 5
1. Make sure the HDD assembly is aligned with the black taped area 1 (Figure 5a). 2. When aligned, carefully insert the HDD assembly 62 into the case so that the connectors line up (Figure 5a). 3. Replace the hard disk bay covers and screws. a.
1
1
Inserting the Hard Disk Into the HDD Bay a. Make sure the HDD assembly is aligned with the black taped area. When aligned, carefully insert the HDD assembly into the case so that the connectors line up.
2.Disassembly
2
2. HDD Assembly
Inserting the Hard Disk Into the HDD Bay 2 - 9
Disassembly
Figure 6 SSD Removal a. Remove the screws. b. Remove the shielding plate and screw. c. Remove the SSD module.
Removing the SSD Note that the SSD (if installed) is located under the HDD bay. 1. Turn off the computer, and turn it over, remove the battery (page 2 - 5) and HDD (page 2 - 6). 2. Remove screws 1 - 2 from shielding plate (Figure 6a). 3. Carefully remove the SSD shielding plate 63 and remove the screw 4 from the SSD (Figure 6b). 4. The SSD module 65 will pop-up and you can remove it from the computer (Figure 9c). 5. Reverse the process to install a new SSD.
2.Disassembly
a.
c.
b.
5
1
2
4
3. SSD Shielding Plate 5. SSD Module
• 3 Screws
2 - 10 Removing the SSD
3
Disassembly
Removing the Optical (CD/DVD) Device
Figure 7
1. 2. 3. 4.
Turn off the computer, and remove the battery (page 2 - 5). Locate the hard disk bay cover and remove screws 1 & 2 (Figure 7a). Remove the hard disk bay cover 36 (Figure 7b). Remove the screw at point 4 (Figure 7c), and use a screwdriver to carefully push out the optical device 56 at point 6 (Figure 7d). 5. Reverse the process to install any new optical (CD/DVD) device. c.
a.
Optical Device Removal a. Locate the hard disk bay cover and remove the screws. b. Remove the hard disk bay cover. c. Remove the screw. d. Use a screwdriver to carefully push the optical device out.
2.Disassembly
4 1
b.
2
d.
3. HDD Bay Cover 5. Optical Device
6
• 3 Screws
5 3
Removing the Optical (CD/DVD) Device 2 - 11
Disassembly Figure 8 Optical Device Removal (cont’d.) e. Pry the bezel off the optical device. f. Separate the bezel and optical device g. Install the front bezel.
Carefully pry the bezel 8 off the optical device at point 7 (Figure 8d). Separate the bezel 8 and the optical device. Reverse the process to attach the front bezel 8 with the new optical device at point 9 (Figure 8f). Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The screw holes should line up). 10. Replace the component bay cover and tighten the screws. 11. Restart the computer to allow it to automatically detect the new device.
6. 7. 8. 9.
e.
g.
2.Disassembly
7
9
8
f.
8. Bezel Cover
8
• 1 Screw
2 - 12 Removing the Optical (CD/DVD) Device
Disassembly
Removing the Hard Disk from the Secondary HDD Bay
Figure 9
Note that the secondary hard disk (if installed) is located under the optical device bay (CD/DVD). 1. Turn off the computer, and turn it over, remove the battery (page 2 - 5) and optical device (page 2 - 11). 2. Remove the screw at point 1 (Figure 9c), and use a screwdriver to carefully push out the secondary HDD module 6 3 at point 2 (Figure 9a and Figure 9b). 3. When the module is removed turn it over to access the rear. Remove screws 4 - 7 from the secondary HDD module assembly(Figure 9c). 4. Remove the hard disk 68 from the caddy module 9 (Figure 9d). 5. Reverse the process to install a new hard disk (do not forget to replace all the screws and covers). a.
c.
5
7
6
a. Remove the screws. b. Use a screwdriver to carefully push the HDD module out. b. Remove the screws. c. Lift the secondary HDD assembly up and out of the caddy module.
2.Disassembly
4
Secondary HDD Assembly Removal
1
b.
d.
8. HDD 9. Caddy Module
8
9 • 5 Screws
2 3
Removing the Hard Disk from the Secondary HDD Bay 2 - 13
Disassembly Figure 10 RAM Module Removal a. Remove the screws. Slide the bottom cover until the cover and case indicators are aligned.
Removing the Primary System Memory (RAM) The computer has four memory sockets for 204 pin Small Outline Dual In-line (SO-DIMM) DDR 3L type memory modules. The total memory size is automatically detected by the POST routine once you turn on your computer. Note that four SO-DIMMs are only supported by Quad-Core CPUs; Dual-Core CPUs support two SO-DIMMs maximum. Two primary memory sockets are located under component bay cover (the bottom case cover), and two secondary memory sockets are located under the keyboard (not user upgradable). If you are installing only two RAM modules then they should be installed in the primary memory sockets under the component bay cover.
2.Disassembly
Note that the RAM located under the keyboard is not user upgradable.
Memory Upgrade Process 1. Turn off the computer, and turn it over, remove the battery (page 2 - 5). 2. Remove screws 1 - 4 . 3. Slide the bottom cover until the cover and case indicators 5 are aligned (Figure 10a). a.
1
4
2 3
• 4 Screws
2 - 14 Removing the Primary System Memory (RAM)
5
5
Disassembly 4. Lift the component bay cover 6 off the computer case. The modules will be visible at point 7 (Figure 11c). 5. Gently pull the two release latches ( 8 & 9 ) on the sides of the memory socket(s) in the direction indicated below (Figure 11d). 6. The RAM module 10 will pop-up, and you can remove it (Figure 11e). 7. Pull the latches to release the second module if necessary. 8. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot. 9. The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the slot as it will go. DO NOT FORCE the module; it should fit without much pressure. 10. Press the module in and down towards the mainboard until the slot levers click into place to secure the module. 11. Replace the bay cover and screws. 12. Restart the computer to allow the BIOS to register the new memory configuration as it starts up. e.
c.
c. Lift the component bay cover off the computer case. The modules will be visible at point 7 . d. Gently pull the two release latches on the sides of the memory socket(s) in the direction indicated below. e. The RAM module will pop-up, and you can remove it.
10
7
d.
Contact Warning
8
8
9
9
Be careful not to touch the metal pins on the module’s connecting edge. Even the cleanest hands have oils which can attract particles, and degrade the module’s performance.
6. Component Bay Cover 10. RAM Module
Removing the Primary System Memory (RAM) 2 - 15
2.Disassembly
6
Figure 11 RAM Module Removal (cont’d.)
Disassembly Figure 12
2.Disassembly
Keyboard Removal a. Remove the component bay cover. b. Use the small tool provided to carefully push out the top cover module. c. Remove the top cover module. d. Remove the screws. e. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable.
Removing the System Memory (RAM) from Under the Keyboard The computer has four memory sockets for 204 pin Small Outline Dual In-line (SO-DIMM) DDR 3L type memory modules. The total memory size is automatically detected by the POST routine once you turn on your computer. Note that four SO-DIMMs are only supported by Quad-Core CPUs; Dual-Core CPUs support two SO-DIMMs maximum. Two primary memory sockets are located under component bay cover (the bottom case cover), and two secondary memory sockets are located under the keyboard. If you are installing only two RAM modules then they should be installed in the primary memory sockets under the component bay cover.
Memory Upgrade Process 1. 2. 3. 4. 5. a.
Turn off the computer, and turn it over, remove the battery (page 2 - 5). Remove screws 1 - 4 (Figure 12a). Use the small tool A provided (see picture below) to carefully push out the top cover module at point B . Remove the top cover module C and remove screws 5 - 9 . Carefully lift the keyboard D up, being careful not to bend the keyboard ribbon cable 10 (Figure 12e). 2
1
c. 3
C
4
d. b.
C. Top Cover Module D. Keyboard
5
A
6
7
e. B 10
D
• 9 Screws
Top Cover Module Tool 2 - 16 Removing the System Memory (RAM) from Under the Keyboard
8
9
Disassembly 6. Disconnect the keyboard ribbon cable 10 from the locking collar socket 11 by using a small flat-head screwdriver to pry the locking collar pins 12 away from the base (Figure 13f). 7. Remove the keyboard and the memory sockets 13 & 14 will be visible. 8. Gently pull the two release latches ( 15 & 16 ) on the sides of the memory socket(s) in the direction indicated below. 9. The RAM module 17 will pop-up, and you can remove it. 10. Pull the latches to release the second module if necessary. 11. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot. 12. The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the slot as it will go. DO NOT FORCE the module; it should fit without much pressure. 13. Press the module in and down towards the mainboard until the slot levers click into place to secure the module. 14. Replace the bay cover and screws. 15. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
15
10
12
11
12
15
17
16
17
16
f. Disconnect the keyboard ribbon cable from the locking collar socket by using a small flat-head screwdriver to pry the locking collar pins away from the base. g. Remove the keyboard and the memory sockets will be visible. h. Gently pull the two release latches on the sides of the memory socket(s) in the direction indicated below.
g.
13
14
Contact Warning Be careful not to touch the metal pins on the module’s connecting edge. Even the cleanest hands have oils which can attract particles, and degrade the module’s performance.
13. RAM Modules
Removing the System Memory (RAM) from Under the Keyboard 2 - 17
2.Disassembly
h.
f.
Figure 13 RAM Module Removal
Disassembly Figure 14 Processor Removal Procedure
2.Disassembly
a. Remove the screws in the correct order. b. Carefully remove the heat sink unit.
Removing and Installing the Processor Processor Removal Procedure 1. Turn off the computer, remove the battery (page 2 - 5), and component bay cover (page 2 - 14). 2. Remove screws 1 - 4 from the heat sink unit in the order indicated on the label (i.e screw 4 first through to screw 1 last Figure 14a). 3. Carefully (it may be hot) remove the heat sink unit 5 (Figure 14b). a.
2
4
3
1
Note: Loosen the screws in the reverse order 4-3-2-1 as indicated on the label.
CPU Warning In order to prevent damaging the contact pins when removing the CPU, it is necessary to first remove the WLAN module from the computer.
b.
5. Heat Sink Unit
• 4 Screws
2 - 18 Removing and Installing the Processor
5
Disassembly 4. 5. 6. 7.
Turn the release latch 6 towards the unlock symbol , to release the CPU (Figure 15c). Carefully (it may be hot) lift the CPU A up out of the socket (Figure 15d). See page 2 - 20 for information on inserting a new CPU. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
Figure 15 Processor Removal (cont’d) c. Turn the release latch to unlock the CPU. d. Lift the CPU out of the socket.
c.
2.Disassembly
6
6
Unlock
Lock
A
d.
Caution The heat sink, and CPU area in general, contains parts which are subject to high temperatures. Allow the area time to cool before removing these parts.
A. CPU
Removing and Installing the Processor 2 - 19
Disassembly Figure 16 Processor Installation a. Insert the CPU. b. Turn the release latch towards the lock symbol. c. Remove the sticker from the heat sink unit and insert the heat sink. d. Tighten the screws.
Processor Installation Procedure 1. Insert the CPU A , pay careful attention to the pin alignment (Figure 16a), it will fit only one way (DO NOT FORCE IT!), and turn the release latch B towards the lock symbol (Figure 16b). 2. Remove the sticker C (Figure 16c) from the heat sink unit (if it is a new unit). 3. Insert the heat sink unit D as indicated in Figure 16c. 4. Tighten the CPU heat sink screws in the order 1 , 2 , 3 & 4 (the order as indicated on the label and Figure 16d). 5. Replace the CPU fan, component bay cover and tighten the screws (page 2 - 18). a.
c. C
2.Disassembly
A D
Note: Tighten the screws in the order 1-23-4 as indicated on the label. b.
d.
A. CPU D. Heat Sink
• 4 Screws
2
4
3
1
B
2 - 20 Removing and Installing the Processor
Disassembly
Removing the Wireless LAN Module
Figure 17
Turn off the computer, remove the battery (page 2 - 5) and the keyboard (page 2 - 16). The Wireless LAN module will be visible at point 1 under the keyboard (Figure 17a). Carefully disconnect cables 2 - 3 , then remove screw 4 from the module socket (Figure 17b). The Wireless LAN module 5 will pop-up (Figure 17c). Lift the Wireless LAN module (Figure 17d) up and off the computer.
1. 2. 3. 4. 5.
c.
a.
a. The Wireless LAN module will be visible at point 1 under the keyboard b. Disconnect the cables and remove the screw. c. The WLAN module will pop up. d. Lift the WLAN module out.
2.Disassembly
1
Wireless LAN Module Removal
5
b.
d. 4 3
5
5. WLAN Module
2 • 1 Screw
Removing the Wireless LAN Module 2 - 21
Disassembly
Wireless LAN, Combo, 3G & LTE Module Cables Note that the cables for connecting to the antennae on WLAN, WLAN & Bluetooth Combo, 3G and LTE modules are not labelled. The cables/covers (each cable will have either a black or transparent cable cover) are color coded for identification as outlined in the table below.
Module Type
2.Disassembly
WLAN/WLAN & Bluetooth Combo
Antenna Type
Cable Color
WM 1
Black
WM 2
Gray
WM 3
White
LTE 1
Black
LTE 2
Gray
3G 1
Black
3G 2
Gray
LTE Broadband
Cable Cover Type
Transparent
Black
3G Broadband
Black
Cable 1 is usually connected to antenna 1 (Main) on the module, and cable 2 to antenna 2 (Aux).
2 - 22 Wireless LAN, Combo, 3G & LTE Module Cables
Disassembly
Removing the MSATA Module 1. 2. 3. 4.
Figure 18 MSATA Module Removal
Turn off the computer, remove the battery (page 2 - 5), and component bay cover (page 2 - 14). Locate the module; it is visible at point 1 (Figure 18a). Carefully remove the screw 2 from the module (Figure 18b). Lift the module 3 up and off the computer (Figure 18b).
a. Locate the module. b. Remove the screw. c. The module will pop-up. d. Lift the module up off the socket.
c.
a.
3
2.Disassembly
1
d.
b. 2
3
3. MSATA Module
• 1 Screw
Removing the MSATA Module 2 - 23
Disassembly
Figure 19 Video Card Removal Procedure
2.Disassembly
a. Remove the screws in the correct order. b. Carefully remove the heat sink units. c. Remove the video card screws. The video card will pop up. d. Remove the video card.
Removing and Installing the Video Card Video Card Removal Procedure Turn off the computer, turn it over and remove the battery (page 2 - 5) and component cover (page 2 - 14). Remove screws 1 - 7 from the heat sink unit in the order indicated on the label (i.e screw 7 first through to screw 1 last) (Figure 19a). 3. Carefully (it may be hot) remove the heat sink unit 8 (Figure 19b). 4. Remove screws 9 & 10 from the video card. The video card 11 will pop up (Figure 19c). 5. Remove the video card 11 (Figure 19d). a. c. 1. 2.
c.
1
11
3 10
9
5
Caution The heat sink, and video card area in general, contains parts which are subject to high temperatures. Allow the area time to cool before removing these parts.
9
2
4
Note:
6
Please use a hexagonal screwdriver to remove screws 9 & 10 .
7 d.
b.
8
Heat Sink Screw Removal and Insertion
15
Remove the screws from the heat sink in the order indicated here: 7-6-5-4-3-2-1.
8. Heat Sink Units 11. Video Card
• 9 Screws
2 - 24 Removing and Installing the Video Card
11
When tightening the screws, make sure that they are tightened in the order: 1-2-3-4-5-6-7.
Disassembly
For video card (N15E-GX) additional removal procedure Remove screws 12 - 15 from the video card assembly (Figure 20e). Separate the shielding plate 16 from the video card 11 (Figure 19d).
6. 7.
e.
15
Figure 20 Video Card Removal Procedure (cont’d.)
13 e. Remove the screws. f. Separate shielding plate and video card.
12
14
2.Disassembly
f.
16 11
11. Video Card 16. Shielding Plate
• 4 Screws
Removing and Installing the Video Card 2 - 25
Disassembly
Figure 21 Installing a New Video Card e. Insert the video card at a 30 degree angle. f. Fit the connectors straight and even, and secure the card with screws 17 & 18 .
Installing a New Video Card Prepare to fit the video card 11 into the slot by holding it at about a 30° angle (Figure 21e). The card needs to be fully into the slot, and the video card and socket have a guide-key and pin which align to allow the card to fit securely (Figure 21f). Fit the connectors firmly into the socket, straight and evenly.
1. 2. 3.
e.
f.
17
2.Disassembly
11 18
Note:
Caution The heat sink, and video card area in general, contains parts which are subject to high temperatures. Allow the area time to cool before removing these parts.
Take special care that the speaker cable is not hindering the video card during installation.
4. DO NOT attempt to push one end of the card in ahead of the other. 5. The card’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the socket as it will go (none of the gold colored contact should be showing). DO NOT FORCE the card; it should fit without much pressure. 6. Secure the card with screws 17 & 18 (Figure 19 on page 2 - 24). 7. Place the heat sink back on the card, and secure the screws in the order indicated in Figure 19 on page 2 - 24. 8. Attach the video card fan and secure with the screws as indicated in Figure 19 on page 2 - 24. 9. Reinsert the component bay cover, and secure with the screws as indicated in Figure 12 on page 2 - 16.
11. Video Card
• 2 Screws
2 - 26 Removing and Installing the Video Card
Part Lists
Appendix A: Part Lists This appendix breaks down the P150SM-A / P151SM-A / P151SM1-A series notebook’s construction into a series of illustrations. The component part numbers are indicated in the tables opposite the drawings. Note: This section indicates the manufacturer’s part numbers. Your organization may use a different system, so be sure to cross-check any relevant documentation. Note: Some assemblies may have parts in common (especially screws). However, the part lists DO NOT indicate the total number of duplicated parts used.
A.Part Lists
Note: Be sure to check any update notices. The parts shown in these illustrations are appropriate for the system at the time of publication. Over the product life, some parts may be improved or re-configured, resulting in new part numbers.
A - 1
Part Lists
Part List Illustration Location The following table indicates where to find the appropriate part list illustration. Table A- 1 Part List Illustration Location
A.Part Lists
Parts
A - 2 Part List Illustration Location
Top with Fingerprint
page A - 3
Top without Fingerprint
page A - 4
Bottom (N15E-GX)
page A - 5
Bottom (N15P-GX)
page A - 6
LCD
page A - 7
COMBO
page A - 8
DVD-Dual Drive
page A - 9
HDD
page A - 10
HDD Caddy
page A - 11
Part Lists
Top with Fingerprint
Figure A - 1
Top with Fingerprint A - 3
A.Part Lists
Top with Fingerprint
Part Lists
Top without Fingerprint
A.Part Lists
Figure A - 2 Top without Fingerprint
A - 4 Top without Fingerprint
Part Lists
Bottom (N15E-GX)
Figure A - 3
Bottom (N15E-GX) A - 5
A.Part Lists
Bottom (N15E-GX)
Part Lists
Bottom (N15P-GX)
A.Part Lists
Figure A - 4 Bottom (N15P-GX)
A - 6 Bottom (N15P-GX)
Part Lists
LCD
Figure A - 5
LCD A - 7
A.Part Lists
LCD
Part Lists
COMBO
A.Part Lists
Figure A - 6 COMBO
A - 8 COMBO
Part Lists
DVD-Dual Drive
Figure A - 7
(祥和)
DVD-Dual Drive A - 9
A.Part Lists
DVD-Dual Drive
Part Lists
HDD
A.Part Lists
Figure A - 8 HDD
A - 10 HDD
Part Lists
HDD Caddy
Figure A - 9
HDD Caddy A - 11
A.Part Lists
HDD Caddy
A.Part Lists
Part Lists
A - 12
Schematic Diagrams
Appendix B: Schematic Diagrams This appendix has circuit diagrams of the P150SM-A / P151SM-A / P151SM1-A notebook’s PCB’s. The following table indicates where to find the appropriate schematic diagram. Diagram - Page
Diagram - Page
Diagram - Page
Diagram - Page
Lynix Point 2/9 - Page B - 21
DDR 1.35V/0.75VS PCH 1.5V - Page B - 40
P150 2nd HDD Board - Page B - 59
Processor 1/7 - Page B - 3
Lynix Point3/9 - Page B - 22
VDD3, VDD5 - Page B - 41
Indicatory LED Board - Page B - 60
Processor 2/7 - Page B - 4
Lynix Point 4/9 - Page B - 23
5V, 5VS, 3.3V, 3.3VS, 1.5VS - Page B - 42
Function LED Board - Page B - 61
Processor 3/7 - Page B - 5
Lynix Point 5/9 - Page B - 24
Power 1.05VS - Page B - 43
2nd mSATA Board - Page B - 63
Processor 4/7 - Page B - 6
Lynix Point 6/9 - Page B - 25
LED 5V - Page B - 44
Power on / S4 Resume Seq. - Page B - 64
Processor 5/7 - Page B - 7
Lynix Point 7/9 - Page B - 26
Power V-Core 1 - Page B - 45
S3 Resume Seq. - Page B - 65
Processor 6/7 - Page B - 8
Lynix Point 8/9 - Page B - 27
AC_In, Charger - Page B - 46
Into S3 Sequence - Page B - 66
Processor 7/7 - Page B - 9
Lynix Point 9/9 - Page B - 28
TPM - Page B - 47
Into S4 Sequence - Page B - 67
DDR3 CHA SO-DIMM_0 - Page B - 10
USB+eSATA, USB Charging - Page B - 29
Audio Board - Page B - 48
DDR3 CHA SO-DIMM_1 - Page B - 11
USB 2.0, CCD, Mini PCIE, LID - Page B - 30
P150 ODD Board - Page B - 49
DDR3 CHB SO-DIMM_1 - Page B - 12
LED, Hotkey, LID SW, Fan - Page B - 31
P150 Click Board - Page B - 50
DDRIII CHB SO-DIMM_0 - Page B - 13
RJ 45 - Page B - 32
Power LED Board - Page B - 51
MXM PCI-E - Page B - 14
Codec Realtek ALC892 - Page B - 33
Function LED Board - Page B - 52
Panel, Inverter, CRT - Page B - 15
APA2607-TPA2008D2 - Page B - 34
Indicatory LED Board - Page B - 53
PS8625 - Page B - 16
KBC-ITE IT8587A - Page B - 35
P170 2nd HDD Board - Page B - 54
1394a_XIO2221 - Page B - 17
Backlight Keyboard - Page B - 36
Power & LED Board - Page B - 55
Display Port - Page B - 18
mSATA, FAN, TP, FP, MULTI-CON - Page B - 37
P170 Click Board - Page B - 56
HDMI - Page B - 19
Card Reader RTL8411 - Page B - 38
P150 Fingerprint Board - Page B - 57
Lynix Point 1/9 - Page B - 20
USB 3.0 - Page B - 39
P170 Fingerprint Board - Page B - 58
Table B - 1 Schematic Diagrams
B.Schematic Diagrams
Block Diagram - Page B - 2
Version Note The schematic diagrams in this chapter are based upon version 6-7P-P15SG-0A3. If your mainboard (or other boards) are a later version, please check with the Service Center for updated diagrams (if required).
B - 1
Schematic Diagrams
Block Diagram 5
4
AUDIO BOARD POWER LED BOARD
P170 Finger BOARD
SHEET 50
P150 ODD BOARD
3
120 mil
3
C695 1u_6.3V_X5R_04 Gary D03 ᄅᏺ By٥شᒵሁ
W LAN_CON_POW ER 34
FOR P150EM/P151EM1
R258
GND *0_04
R271
34
3IN1
34
GND6 GND7 GND8 GND9 GND10
1
NCT3522U -- 6-02-03522-9C0 S: G5243A ---- 6-02-05243-9C0 AP2821KTR-G1 6-02-02821-9C0
C399 C348
4
W_DISABLE# PERSET# SMB_CLK SMB_DATA USB_DUSB_D+ 3.3VAUX_1 1.5V_1 1.5V_2 3.3VAUX_2 LED_WWAN# LED_WLAN# LED_WPAN#
18 26 34 40 50 20 22 30 32 36 38 24 28 48 52 42 44 46
*1u_10V_Y5V_06 GND
OUT
2
LID_SW #
GND
14,34,36
C7
MH-248 AH9249NTR-G1
*100p_50V_NPO_04
GND GND
PSU1, PSU2 3
GND
2
1
W LAN_EN 34 BUF_PLT_RST# 16,22,30,34,37
BUF_PLT_RST# BT_DET#
20 mil
USB_PN3 23 USB_PP3 23 3.3VAUX_1
R249
40 mil 20 mil
3.3V_W LAN
A
0_04
3.3V_W LAN R343 *10K_04
USB_P3 H15 H7_0B4_0D2_8
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title
6-34-M52NS-020-1
88910-5204M-01
4
VCC
Gary 12/25(٥شᒵሁFix) R252 3.3V_W LAN 10K_04
Size A3 GND
B - 30 USB 2.0, CCD, Mini PCIE, LID
0.1u_16V_Y5V_04
ڼՠᐗቃఎ ( 06 SIZE )
D01a_1016_Alex
5
100K_04
U5
VDD3 PCH_BT_EN# 20 M:
80CLK
B
VDD3
GND
R612 *20K_04
GND2 GND3 GND4 GND11 PETn0 PETp0 PERn0 PERp0
2
LID SWITCH IC
P150SM
3.3V
5
NCT3522U
KEY 21 27 29
VIN
VIN/SS
J_MINI1
3.3V
VOUT
C329 0.1u_16V_Y5V_04
27 W LAN_CLKREQ# 27 CLK_PCIE_MINI# 27 CLK_PCIE_MINI
1 OPEN_2A
U5
U15
>120 mil
34
13,19,20,21,23,24,25,26,27,34,36,37,40,41,42,45,46 13,28,32,38,39,41,42 14,32,33,44 2,14,19,30,32,36,37,39,41,42 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,30,32,33,34,35,36,37,41,44,46,61
GND
Sheet 29 of 66 USB 2.0, CCD, Mini PCIE, LED
1 3 5 7 9 11 13 15 17 19 21
3
B.Schematic Diagrams
C125
2
G5243A
3
Date: 2
[29] USB2.0, CCD, MINI PCIE, LID Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet 1
29
of
66
Schematic Diagrams
LED, Hotkey, LID SW, Fan 5
4
3
CPU FAN CONTROL 5VS
BAT LED
U33 FON1# C516
C504
1 2 3 4
2
FON VIN VOUT VSET
GND GND GND GND
8 7 6 5
5VS
U22
C289
4.7u_6.3V_X5R_06
CPU_FAN 34
D
1 2 3 4
FON#
AX995SA
0.1u_16V_Y5V_04
1
VGA FAN CONTROL
CPU_FAN
C294
FON VIN VOUT VSET
GND GND GND GND
AX995SA
0.1u_16V_Y5V_04 4.7u_6.3V_X5R_06
5VS_CPU_FAN J_FAN1
J_LED3
1 2 3
C519 10u_10V_Y5V_08
1 2 3 4 5
85205-03701
8 7 6 5
VGA_FAN
VGA_FAN 34
D
5VS_VGA_FAN
GND
J_FAN2 LED_ACIN LED_PW R LED_BAT_CHG LED_BAT_FULL
LED_ACIN 34 LED_PW R 34 LED_BAT_CHG 34 LED_BAT_FULL 34
1 2 3
C296 10u_10V_Y5V_08
85205-03701
J_FAN1
34 CPU_FANSEN
85204-05001
3 R417
3.3VS
4.7K_04
J_FAN1
34 VGA_FANSEN
3
1
4.7K_04 1
MB to EC BOARD CONN P150SM/P151SM1 only 3.3VS 3.3VS
1.05VS
D02A Change power plant(DEL VIN,3.3VS,PJ4,PJ7,PJ8,PJ10)
C
J_LED1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
SATA_LED# 19,36
dGPU_PW R_EN# 13,34,36
C184
C271
C723 0.1u_16V_Y5V_04
AIRPLANE# 34,36 Gary 10/17(٥شᒵሁFix net name)
dGPU_PW R_EN#
0.1u_16V_Y5V_04
AIRPLANE#
85201-06051 GND 3.3VS J_LED2
1 2 3 4 5 6
LED_NUM# LED_CAP# LED_SCROLL#
C
J_EC1
for AIRPLANE LED Stanley SATA_LED#
0.01u_16V_X7R_04
1 2 3 4 5 6
LED_NUM# 34,36 LED_CAP# 34,36 LED_SCROLL# 34,36
85201-06051
B
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Sheet 30 of 66 LED, Hotkey, LID SW, Fan
5VS KBC2_INT# 34 SMC_BAT 34,45 SMD_BAT 34,45 BUF_PLT_RST# 16,22,29,34,37 LPC_AD0 20,34,46 LPC_AD1 20,34,46 LPC_AD2 20,34,46 LPC_AD3 20,34,46 LPC_FRAME# 20,34,46 SERIRQ 20,34,46 SUSB# SUSC# 3.3VS
R486
47_04
PCLK_KBC2 27
C990 33p_50V_NPO_04
21,28,32,33,34,41,42 21,34,39 D02A Change PIN define(DEL KB2_LED_ENZ/XLE/XSDI/XCLK) D02A Change PIN20,21(3.3VS) D02A Change PIN22,23(GND)
HEADPHONE-L 32 HEADPHONE-R 32 FRONT_L 32,33 FRONT_R 32,33 SPK_HP# 29
B
50541-0300 5VS VDDQ
D02 12/03 Value᧢ ᧢ ޓGary
5VS
3.3V
3.3V
P/N:6-20-94K10-130
3.3VS
Close to U39
Gary D03ଥ(إDEL J_VLED3,L18,U78,R339,Q17)
C219
C617
C396
C174
C395 0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
Close to H19
0.1u_16V_Y5V_04
0.01u_16V_X7R_04
0.01u_16V_X7R_04
Close to PC16
0.1u_16V_Y5V_04
C115
0.1u_16V_Y5V_04
C161
0.1u_16V_Y5V_04
C416
C756 0.01u_16V_X7R_04
C758 0.01u_16V_X7R_04
0.01u_16V_X7R_04
C757
C179
0.1u_16V_Y5V_04
C755
VIN 3.3VS VDD3 3.3V 5VS 1.05VS VDDQ
A
13,14,39,40,41,42,44,45 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,32,33,34,35,36,37,41,44,46,61 13,19,20,21,23,24,25,26,27,29,34,36,37,40,41,42,45,46 2,14,19,29,32,36,37,39,41,42 14,32,33,44 3,6,25,26,42,44 3,4,6,9,10,11,12,39
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
Title
[30] SATA ODD,LED,HOTKEY,LID SW
Size A3 Date: 5
4
3
A
2
Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
30
of
66
1
LED, Hotkey, LID SW, Fan B - 31
B.Schematic Diagrams
R439
3.3VS
Schematic Diagrams
RJ 45 5
4
3
2
1
D05A RN2, RN5Ղ0_8P4R_04 Del LP8, LP9 RN2 D
4 3 2 1
GIGA LAN
5 6 7 8
D
0_8P4R_04 L72
J_RJ1
Sheet 31 of 66 RJ 45
LAN_MDIN0 LAN_MDIP0 LAN_MDIN1 LAN_MDIP1
37 37 37 37
LAN_MDIN2 LAN_MDIP2 LAN_MDIN3 LAN_MDIP3
12 11 9 8
LAN_MDIN2 LAN_MDIP2 LAN_MDIN3 LAN_MDIP3
6 5 3 2 10 7 4 1
40 mil
TD4TD4+ TD3TD3+
MX4MX4+ MX3MX3+
TD2TD2+ TD1TD1+
MX2MX2+ MX1MX1+
TCT4 TCT3 TCT2 TCT1
MCT4 MCT3 MCT2 MCT1
13 14 16 17
LMX1LMX1+ LMX2LMX2+
19 20 22 23
LMX3LMX3+
1 2 3 4
C142
0.01u_16V_X7R_04
C
C133
DLMX1DLMX1+ DLMX2DLMX2+
DLMX1+ DLMX1DLMX2+ DLMX2-
1 2 3 6
*SB0503TL-035 LP9 8 DLMX37 DLMX3+ 6 DLMX45 DLMX4+
DLMX3+ DLMX3DLMX4+ DLMX4-
4 5 7 8
1 2 3 4
LMX4LMX4+
15 18 21 24
DA+ DADB+ DB-
shield shield
GND1 GND2
DC+ DCDD+ DDPJS-08SL3B
*SB0503TL-035 RN5
4 3 2 1
NS892402 C163
8 7 6 5
C178
5 6 7 8 0_8P4R_04
*0.01u_16V_X7R_04 *0.01u_16V_X7R_04 *0.01u_16V_X7R_04 NMCT_1 NMCT_2 NMCT_3 NMCT_4
R72 R71 R70 R69
75_1%_04 75_1%_04 75_1%_04 75_1%_04
C
NMCT_R
C114 100p_2KV_X7R_12_H125
D02_1108_Alex B
B
H9 H6 H10 H5 H26 H27 H8_0D4_3 H8_0D4_3 H8_0D4_3 H8_0D4_3 H7_0D2_8 H8_0D2_8
H7 M2 M-MARK
M1 M-MARK
M4 M-MARK
2 3 4 5
M3 M-MARK
H16 1
9 8 7 6
2 3 4 5
MTH8_0D2_8 GND M6 M-MARK H2 C111D111N
H22 C111D111N
M5 M-MARK
M7 M-MARK
1
2 3 4 5
MTH8_0D2_8 GND
H19 1
9 8 7 6
2 3 4 5
MTH8_0D2_8 GND
H11
9 8 7 6
1
2 3 4 5
MTH8_0D2_8 GND
1
9 8 7 6
MTH8_0D2_8 GND
GND
H20 H8 H14 H6_0D3_7 H3_5D1_8 H3_5D1_8
M8 M-MARK
GND H3
H1 C111D111N
H12
9 8 7 6
6-34-M72SS-010-1
B.Schematic Diagrams
LP8 37 37 37 37
LAN_MDIN0 LAN_MDIP0 LAN_MDIN1 LAN_MDIP1
2 3 4 5
H21 C111D111N
H13 1
9 8 7 6
MTH8_0D2_8 GND
2 3 4 5
H17 1
9 8 7 6
MTH8_0D2_8 GND
2 3 4 5
H4 1
9 8 7 6
MTH8_0D2_8 GND
2 3 4 5
1
MTH8_0D2_8 GND
GND
GND
H18
9 8 7 6
2 3 4 5
1
9 8 7 6
MTH8_0D2_8 GND
GND
A
A
3.3V
2,14,19,29,30,32,36,37,39,41,42
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size A3 Date: 5
B - 32 RJ 45
4
3
2
[31] RJ45,MODEM Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet 1
31
of
66
Schematic Diagrams
Codec Realtek ALC892 5
4
3
2
3.3V
3.3V 3.3VS 5V 5VS
Layout Note: U43 pin 1 ~ pin 11 and pin 47 and pin 48 are Digital signals. The others are Analog signals.
R668 *100K_04
L47
1
2,14,19,29,30,36,37,39,41,42 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,33,34,35,36,37,41,44,46,61 13,28,29,38,39,41,42 14,33,44
C332
0.1u_16V_Y5V_04
C389
0.1u_16V_Y5V_04
HCB1005KF-121T20 C371
C344
C346
C741
PC BEEP 34
KBC_BEEP
19
HDA_SPKR
3
BEEP
2 4 3
*22p_50V_NPO_04 R250 33_04 R255 33_04 R257 33_04 R259 33_04 R262 33_04
Max: 0.5inch
2 A
R265 R264 C377
SPDIFO
48
1u_6.3V_X5R_04
12
7
25 38
VREF VREFOOUT-B_L VREFOUT-B_R
DIGITAL
LDO_IN
C
ALC889 լՂٙ.
INT_MIC C368 22u_6.3V_X5R_08
R266
1K_04
C383 C384
INT_MIC_R
4.7u_6.3V_X5R_06 4.7u_6.3V_X5R_06
VREFOUT-F_L VREFOUT-E FRONT-OUT-L SRUW' FRONT-OUT-R
PCBEEP
FR_HP-L SRUW(FR_HP-R
29 29
R267 R268
75_04 75_04
C385 C386
ANALOG
CAP
CD-L CD-GND CD-R MIC1-L MIC1-R
JDREF
SRUW%
ؾছᒵሁࡳא612Δڕޏ615ՂٙۯᆜଥڕޏՀ:
B
R705 R889 R890
Change to 1u_16V_X7R_06 1/28 Stanley
*0_04 0_04 *0_04
D02 12/03 Value᧢ ޓGary MIC1-VREFO-L AUDG MIC1-VREFO-R
39 41 30 31
MIC2-VREFO
35 36
FRONT_L FRONT_R
D04_Reflash_0903_Alex
T45 T44 FRONT_L 30,33 FRONT_R 30,33
AMP_EN
14 15
HEADPHONE-L
HEADPHONE-R
43 44
C336 C335
45 46
SIDE-L_R SIDE-R_R
33
CAP
*0.1u_16V_Y5V_04
C357
*10u_10V_X5R_08
R242
20K_1%_04
23 24
R243
*5.1K_1%_04
C337 C387 C388
10u_10V_Y5V_08 10u_10V_Y5V_08
C361
40
AUDG
R235 R234
AUDG
30
HEADPHONE-R 75_1%_04 75_1%_04
30
C
SIDE_L SIDE_R
29 29
Sheet 32 of 66 Codec Realtek ALC892
BluRay content protection
*100p_50V_NPO_04 4.7u_6.3V_X5R_06 4.7u_6.3V_X5R_06
R269 R270
75_1%_04 75_1%_04
LINE-L LINE-R
29 29
16 15 14 13 OUTL VDD JD SGND
C135
0.01u_16V_X7R_04
4 5
2
AUDG
GND
EN
3
17
C137
R772 100K_04
33 AMP_EN
C370
D01A_1015_Alex
MIC2-VREFO
*680p_50V_X5R_04 R273 AUDG
2.2K_04 29
MIC1-VREFO-R AUDG
INT_MIC
INT_MIC
AUDG
C400
0.01u_16V_X7R_04 0.01u_16V_X7R_04
R903 R905
22_1%_04 22_1%_04
330p_50V_X7R_04
R253
SMB_CLK 9,10,11,12,20 SMB_DATA 9,10,11,12,20
HP_SCL HP_SDA AUDG 0A1-A_1127_Alex
2.2K_04 MIC1-L
G5243A AUDG
AUDG C136
B
R260
C848 +
MIC1-VREFO-L
P150SM-A_Alex
VIN VIN
2.2K_04
P150SM-A_D01_Alex_1030
MIC1-R HP_VDD
100p_50V_NPO_04 100p_50V_NPO_04
C363
2.2u_6.3V_X5R_04
C315 C321
0.1u_10V_X5R_04
*240K_04
VSS
12 11 10 9
5V
FCM1005KF-121T03
C433
1u_6.3V_X5R_04
OUTA SDA SCL C2_3DR
C2_3DL C1_3DL PGND C1_SDR
0.01u_16V_X7R_04
VOUT
C682
R596
2200p_50V_X7R_04
SV3H612
VSS
HP_AUDG 29
C134
5 6 7 8
INL VREF REXT INR
U24 1
0.1u_10V_X5R_04
0_04
29
L26
C126
AUDG
*680p_50V_X5R_04 A
C856
0_04 +
R900
*470u_6.3V_ESR35M
HEADPHONE-RC
HEADPHONE-RC
29
AUDG
AUDG
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
AUDG
Title
[32] Realtek ALC892
Size A3
Document Number SCHEMATIC1
Date: 5
12/06 DEL Q11,Q12 for HP pop-noise Gary
HEADPHONE-L
C434
C689
2200p_50V_X7R_04
6-13-24031-28B
C603
A
U66
1 2 3 4
C604
P150SM-A_D01_Alex
*0_04 *0_04 R904
HEADPHONE-R_LPF C686 1u_16V_X7R_06
HEADPHONE-LC
HP_VDD
470u_6.3V_ESR35M
R898 R899 HEADPHONE-L_LPF C681 1u_16V_X7R_06
470_04
HCB1608KF-121T25
0_04
22u_6.3V_X5R_08
R704
HEADPHONE-LC
470_04
2.2u_6.3V_X5R_06
VT1818S P2P ALC892
D04_Reflash_0903_Alex
HEADPHONE-L_LPF R773
28 32
0.1u_16V_Y5V_04
C373
AUDG
լՂٙۯᆜ:R704,R889,R898,R904,R900
HEADPHONE-R_LPF R774
AUDG
C372
HeadPhone
Ղٙۯᆜ:C848,R705,R890,R899,C856
HEADPHONE-R
SRUW&
LINE1-L LINE1-R
27
26 42
ALC892
ဠᒵհցٙΔەᎅࣔެࡳՂٙۯᆜ
CENTER LFE
SIDE-L SRUW+ SIDE-R
SRUW)
MIC2-L MIC2-R
21 22
4.7u_6.3V_X5R_06 4.7u_6.3V_X5R_06
SRUW*
NC LDO_IN
18 19 20 MIC1-L MIC1-R
MIC1-L MIC1-R
Sense A Sense B
16 17
MIC2_L MIC2_R
A
D15 *RB751V
HEADPHONE-L
SURR-OUT-L SRUW$ SURR-OUT-R
SPDIFO
37 29
*20mil_P_04
AUDG
L50
SPDIFI/EAPD
13 34
5V
Connect standby power(for pop noise)
SDATA-OUT BIT-CLK SDATA-IN SYNC RESET#
47
EAPD_MODE
SPDIFO
47K_04 C375 4.7K_04 *0.1u_10V_X5R_04
5 6 8 10 11
12/06 value᧢ ޓGary 29 JD_SENSEA 29 JD_SENSEB
L48 HCB1005KF-121T20
D
VREF_CODEC
GPIO0/DMIC-CLK DMIC_DAT GPIO1/DMIC-DATA
BAT54CW (lision) AUDG
5VS
2 L79 2 L80
10u_10V_Y5V_08
EAPD_MODE 29
C
L73 *HCB1005KF-121T20
C
33 D16 1 A
0.1u_16V_Y5V_04
4
3
2
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
32
of
66
1
Codec Realtek ALC892 B - 33
B.Schematic Diagrams
C366
ALC889 Ղٙ.
0.1u_16V_Y5V_04
C364
R254
47p_50V_NPO_04
19 HDA_SDOUT 19 HDA_BITCLK 19 HDA_SDIN0 19 HDA_SYNC 19,33 HDA_RST#
*0_04 MIC_DATA
10u_10V_Y5V_08
AUDG
47p_50V_NPO_04
C742 D04_Reflash_0902_Alex
10u_10V_Y5V_08
U30
C352
R73
0.1u_16V_Y5V_04
5VS
0.1u_16V_Y5V_04
C380
0.1u_16V_Y5V_04
HCB1005KF-121T20 1 HCB1005KF-121T20 1
D04_Reflash_0926_Alex
MIC_CLK MIC_DATA
MIC_CLK MIC_DATA
C379
AVSS1 AVSS2
29 29
C450
Q42 *MTN7002ZHS3
G
SUSB#
S
21,28,30,33,34,41,42
C369
*HCB1005KF-121T20
AUDG 10u_10V_Y5V_08
D
ࡌؘႊ ץAUDG, ᕣၦᝩ܍ሀ။ +5VS & +VIN plane.
L49
AVDD1 AVDD2
*0.1u_16V_Y5V_04
C353
40mil
1 9
(2)MIC1-R (U13.22) (4)LINE-R (U13.24)
G
(1)MIC1-L (U13.21) (3)LINE-L (U13.23)
5VS_AUD
40mil
DVSS2
Layout Note:
3.3VS_AUD
Q19 *MTP3403N3 S
.
D
D
DVDD1 DVDD2
3.3VS
Schematic Diagrams
APA2607-TPA2008D2 5
4
3
2
1
AMP_5VS
A RB751V-40(lision) A *RB751V-40(lision)
R226
for bo sound Stanley 32
R241
EAPD_MODE
0_04
6 20 Mil
R338 4
AMP_EN
AMP_EN
2
C320 22u_6.3V_X5R_08
0.1u_10V_X5R_04 1
C351
14
R227
10K_1%_04
15
LOUTP
LINP
PVDDL1
VOLUME
PVDDL2
NC
10
COSC
1000p_50V_X7R_04
ROSC
R248 C356
AUDG
220p_50V_NPO_04
VDD LOUTN AGND
ROUTN
L22
16
FCM1005KF-121T03
1 2 3 4
ROUT-
20 Mil
18 19 5
LOUTP
20 Mil L19 FCM1005KF-121T03
LOUT+
LOUTN
20 Mil L20 FCM1005KF-121T03
LOUT-
ROUT+ ROUTLOUT+ LOUT-
9
D
4 Ohm Speaker
85205-04001
4 13 8 12
TPA2008D2
25
0.1u_16V_Y5V_04
11
D02_1119_EMI
LINN
J_X51SPK1
1000p_50V_X7R_04
2
6.98K_1%_04
PGNDR2
17
2W
Front Speaker R / L
20 Mil
1000p_50V_X7R_04
0.1u_10V_X5R_04
R228
PGNDL2
AUDG ROUT+
1000p_50V_X7R_04
C796
C423
AUDG
0_04 C354
PGNDR1
21
AUDG FCM1005KF-121T03
C764
5VS
PVDDR2
PGNDL1
L21
C763
AUDG
On
*01u_10V_Y5V
ROUTN
RINP
AUDG ROUTP
20
C762
3
R247
30,32 FRONT_L
32
C422
D04_Reflash_0905_Alex
120K_04 AUDG AUDG
AUDG
D02_1119_EMI
10
C312
SS
4 5 11
15000p_50V_X7R_06
R213
R585 18K_1%_06
0_04
SD MUTE
2CH_SUBWOOFER_RC
C350
0.1u_10V_X5R_04
6
C288
0.1U_10V_X5R_04
7
C338
0.1u_10V_X5R_04
4
C342
0.1u_10V_X5R_04
3
RINN
AUDG
OSCIN C
PFLAG GAIN1_R GAIN0_R DRC1_R DRC0_R
R101 100K_04 AMP_3V3LDO
18 25 24 23 22
PFLAG GAIN1 GAIN0 DRC1 DRC0
PMAX
R214 10K_04
C298 0.1U_10V_X5R_04
SUBWOOFER+
L66
HCB1005KF-121T20
SUBWOOFER-
L67
HCB1005KF-121T20
AMP_PWR
C341 + R237 *10K_04
R539 *10K_04
R547 *10K_04
R579 *10K_04
R244 120K_04
AUDG
AUDG
C340 0.1u_10V_X5R_04
C731
B
FRONT_R
0.1u_16V_Y5V_04 C773
FRONT_L
0.1u_16V_Y5V_04 C486
C299 10u_25V_X5R_08
*220u_25V_V_B 10u_25V_X5R_08 AUDG
GAIN1_R GAIN0_R DRC1_R DRC0_R PFLAG
2 1
4 Ohm Speaker
J_SUBWOOF1
40 mil
27 28
AUDG
AUDG
C286 4.7u_25V_X5R_08
1000p_50V_X7R_04
ActiveLPS =>stuff R539,R237 AMP_3V3LDO PassiveLPF=>stuff R574,R575 3/3 Stanley
9
PMAX
18K_1%_04
3V3LDO
88266-02001
40 mil
29
LGND
1000p_50V_X7R_04
R215
31 30
LOUTP2 LOUTP1
LOUTN1 LOUTN2
C771
2
C418 10p_50V_NPO_04
AUDG
14 15
ROUTN1 ROUTN2
APA2607QBI
C402 0.1u_16V_Y5V_04
AUDG
13
RGND LINN LINP
C398 0.1u_16V_Y5V_04
AUDG
11 12
ROUTP1 ROUTP2
RINP
G5110
C419 330p_50V_X7R_04
21 20
OSCIN OSOC
10K_04
R586 130K_1%_06 AUDG
1
COMP
17 19
AMP_EN
2
FB
SHDN
C408
10u_6.3V_X5R_06
6 7
LX1 LX2
FREQ
LVDDN LVPPD
IN
Case_GND
3
C394 0.1u_16V_Y5V_04
AUDG
R587
33
R90
VREF
9
AMPPWR_FREQ *10mil_short AMPPWR_EN 10_04
R582
26 32
1
U56
GND GND GND_Thermal
8
AMPPWR_IN 10u_6.3V_X5R_06
C376 0.1u_16V_Y5V_04
R583 *10K_04
AMP_PWR 10 16
C
FMS3004-AS-H
VLDO
A
AMPPWR_SW
U7
RVDDP RVDDN
BCIHP0420TB-2R2M
AGND
L25
AMP_PWR
2200p_50V_X7R_04
D28
AMPPWR_IN C190
C
C84
5
5VS
2.2_04
8
Gary D03 DEL PJ12
.
Sheet 33 of 66 APA2607TPA2008D2
R116
AUDG
C772
AUDG
AUDG P150SM-A_D01_Alex_1030
3.24K_1%_04 20 Mil
R424
D02_1112_Alex
R292
AUDG
2CH_SUBWOOFER_RC
15.4K_1%_04
R593 15mil short change to 0_04 3/3 Stanley
B
C477 R578 10K_04
R576 10K_04
R577 *120K_04
R593
*0_04
0.1u_10V_X5R_04
AUDG
AUDG
AUDG
AUDG
D04 Change ALPF to PLPF 3/3 Stanley D04_Reflash_0903_Alex
AMP_PWR
*100K_04
V-
R1121
R1123 *1.27K_1%_04 C1084 R1126 *2.37K_1%_04
R1127 *2.37K_1%_04
SUB_L *100K_04 5
+
*0.1u_10V_X7R_04
OUT 6
-
V-
R1134 *100K_04
AUDG_2
C1085
R1125
C1086
3
*0.1u_10V_X5R_04
*4.3K_1%_04
*0.1u_10V_X7R_04
+
OUT C1088
R1131
C1089
2
*0.1u_10V_X5R_04
*4.3K_1%_04
*0.1u_10V_X7R_04
*LM358L
7
U92B *LM358L
-
+
DEL ALPF 2CH_SUBWOOFER_RC 3/3 Stanley
SUB Woofer out
OUT -
7
R218
*0_04
R1129
*LM358L 1
*0_04
AUDG_2 AUDG_2
AMP_PWR
AMP_PWR
C1090
C1091
*0.1u_16V_X5R_04
*0.1u_16V_X5R_04
AUDG_2
INPUT2-
R1132 *0_04
AUDG_2 AUDG_2
5
6
V-
R1130
8
R1128
C1087
V+
AMP_PWR
INPUT2+
AMP_PWR U93A
AMP_PWR
*33K_1%_04 FRONT_L A
AMP_PWR U93B
R1124 *1.27K_1%_04
OUTPUT1
*0.1u_10V_X7R_04
8
AUDG_2 AUDG_2
*0.47u_6.3V_X5R_04
*0_04
4
-
C1083
FC: 300Hz
SUB_R
U92A *LM358L
8
2
V+
1
OUT
R1122 *100K_04
4
*0.1u_10V_X7R_04
FILTER
V+
+
V-
R1120 *2.37K_1%_04
V+
3
R1119
4
R1118
*33K_1%_04 C1082
AUDG
8
AMP_PWR FRONT_R
1000p_50V_X7R_04
0.1u_16V_Y5V_04
AUDG_2 AUDG AUDG
C847
R574 10K_04
C432
R575 10K_04
4
B.Schematic Diagrams
0.1u_16V_Y5V_04
1000p_50V_X7R_04
0_04 U28 MC74VHC1G08DFT2G
C319
0.1u_16V_Y5V_04
C761
19,32 HDA_RST#
PVDDR1
RINN
23
0.1u_10V_X5R_04
7
1
*0_04
BYPASS
0.1U_10V_X5R_04 24
C308
C318
AUDG Reserve for AMP_EN deley
ROUTP
Thermal_Pad
C D13 C D12
SHUTDOWN
22
5
SUSB#
24 PCH_MUTE#
3
AMP_EN D02 12/03 Value᧢ ޓGary C311 2.2u_6.3V_X5R_06
AUDG
20 Mil 30,32 FRONT_R
21,28,30,32,34,41,42 D
C355
U27
.
A RB751V-40(lision)
*0.1u_10V_X5R_04
.
C D33
C331
100K_1%_04
.
34 KBC_MUTE#
R236
5VS
.
AUDIO AMP
L46 HCB1608KF-121T25
TPA2008D2 P2P BA20550 (TSSOP24)
The volume control.the gain range is from -80db(Vvolume=5V) to +20db(Vvolume=0V) with 64 steps precise control.
3.3VS
AUDG_2
R1133 *100K_04
AUDG_2 A
R1135 *100K_04
AUDG_2 AUDG_2
AUDG_2
AUDG_2 Title 5VS 14,32,44 3.3VS 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,32,34,35,36,37,41,44,46,61
Date: 5
B - 34 APA2607-TPA2008D2
4
3
2
[33] APA2607 / TPA2008D2 6-71-P15S0-DA3A
Size Document Number Custom
Thursday, March 06, 2014
Sheet 1
33
of
Rev 66
Schematic Diagrams
KBC-ITE IT8587A 5
4
3
KBC_AVDD
C401
C417
C420
0.1u_16V_Y5V_04
10u_10V_Y5V_08
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
1
VDD3
VDD3
.
C404
2
L53 HCB1005KF-121T20
VDD3
Ղ൷ᤛ
C413
C411
C410
0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04
1
Հ൷ᤛ 24
J_KB1
26
R279
1
J_KB2,3
C415 HCB1005KF-121T20
14
R673 0_04
126 4 16 20
24 GA20 45 AC_IN# 30 LED_ACIN 21,23 AC_PRESENT 24 24
23 15
SMI# SCI#
76 77 78 79 80 81
29 W LAN_EN 33 KBC_MUTE# 19 ME_W E# 30 CPU_FAN 13 VGA_SELECT 30 VGA_FAN
C
D06 for NV & AMD MXM card ٥ش nv reccommended 45 BAT_DET 45
BAT_VOLT
2 THERM_VOLT 45 TOTAL_CUR 13,24 DGPU_PW RGD 29 W LAN_DET# D01A_1016_Alex
30,45 30,45 13,15,32,35 13,15,32,35
LOW ACTIVE HIGH ACTIVE B
66 67 68 69 70 71 72 73
BAT_DET BAT_VOLT
TOTAL_CUR DGPU_PW RGD MODEL_ID
Follows common Design ADD 47 ohm,3/3 Stanley R283 47_04 SMC_BAT R285 47_04 SMD_BAT SMC_VGA_THERM SMC_VGA_THERM SMD_VGA_THERM SMD_VGA_THERM EC_H_PECI_R KBC2_INT# 30 KBC2_INT#
32 KBC_BEEP 30,36 LED_SCROLL# 30,36 LED_NUM# 30,36 LED_CAP# 30 LED_BAT_CHG 35 EC_CTRL_EN# 30 LED_PW R
110 111 115 116 117 118 24 25 28 29 30 31 32 34
LCD_BRIGHTNESS KBC_BEEP
3IN1 29 3IN1 80CLK 29 80CLK 13,30,36 DGPU_PW R_EN# 0_04 R636 3IN1 A C KBC_AC/BATL# 13 VGA_THROTTLE *RB751V-40(lision) D27 36 TP_CLK 36 TP_DATA Gary D03Ղٙ᧢ޓ0103
85 86 87 88 89 90 125
30 LED_BAT_FULL
18 21
41 PW R_SW # 14,29,36 LID_SW # 21
33
PW R_BTN# Gary D03 ᧢ޓ
108 H_PROCHOT#_EC 109
A
ECSCI#/GPD3( PU ) ECSMI#/GPD4( PU )
DAC GPJ0 GPJ1 DAC2/GPJ2 DAC3/GPJ3 DAC4/GPJ4 DAC5/GPJ5
IT8587B
ADC
FLFRAME#/GPG2 FLAD0/SCE# FLAD1/SI FLAD2/SO FLAD3/GPG6 FLCLK/SCK ( PD )FLRST#/WUI7/TM/GPG0 ( PD )KSO16/GPC3 ( PD )KSO17/GPC5 ( PD )ID0/GPH0 ( PD )ID1/GPH1 ( PD )ID2/GPH2 ( PD )ID3/GPH3 ( PD )ID4/GPH4 ( PD )ID5/GPH5 ( PD )ID6/GPH6
PWM
( PD )ID7/GPG1
EXT GPIO ( PD )EGAD/GPE1 ( PD )EGCS#/GPE2 ( PD )EGCLK/GPE3
PS/2
( PD )WUI5/GPE5 ( PD )LPCPD#/WUI6/GPE6
PWM/COUNTER ( PD )TACH0/GPD6 ( PD )TACH1/GPD7
WAKE UP
( PD )TMRI0/WUI2/GPC4
PWRSW/GPE4( PU )
CIR( PD )TMRI1/WUI3/GPC6
RI1#/WUI0/GPD0( PU ) RI2#/WUI1/GPD1( PU )
( PD )CRX/GPC0 ( PD )CTX/GPB2
GP INTERRUPT
LPC/WAKE UP
GINT/GPD5( PU )
UART RXD/GPB0( PU ) TXD/GPB1( PU )
*0_04 EC_VSS
C414
*0.1u_16V_Y5V_04
W/0 CIR)
1 2 3 7 9 10 13 16 17 18 19 20 21 22 23 24
KB-SO0 KB-SO1 KB-SO2 KB-SO3 KB-SO4 KB-SO5 KB-SO6 KB-SO7 KB-SO8 KB-SO9 KB-SO10 KB-SO11 KB-SO12 KB-SO13 KB-SO14 KB-SO15
( PD )L80HLAT/GPE0 ( PD )RING#/PWRFAIL#/LPCRST#/GPB7
KB-SO0 KB-SO1 KB-SO2 KB-SO3 KB-SO4 KB-SO5 KB-SO6 KB-SO7 KB-SO8 KB-SO9 KB-SO10 KB-SO11 KB-SO12 KB-SO13 KB-SO14 KB-SO15 KB-SO16 KB-SO17
update 2/14 Stanley
5
RA
P177SM-A
10K
P170SM-A
6.49K
10K
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 25 26
2V
P151SM-A
11.8K
10K
1.5V
P151SM1-A
23.7K
CLOCK CK32KE CK32K
KBC_SPI_CE# KBC_SPI_SI KBC_SPI_SO
R941 R682 R942
1 R672 *1K_04 PJ3 D04_Reflash_0909_Alex *10K_04 *10K_04 *10K_04
KBC_SPI_SCLK
R684
10K_04
VDD3
P157SM-A
10K
3.24K
smart charger
1V
10K
0V
10K
2.5V
RA R277 RB R278
MODEL_ID
smart charger
*6.49K_1%_04
Sheet 34 of 66 KBC-ITE IT8587A
VDD3
10K_04
CCD_EN
VDD3 Gary D03 Update(Add R672,PJ3)
56 57
29
93 94 95 96 97 98 99
KB-SO16 KB-SO17
R630 R631 R632
10K_04 1.5K_04 1.5K_04
R679
82 83 84
3.3VS
GPIO2_FB_TGL_REQ 13,24
AC D22 BAV99N3
BAT_DET
AC D23 BAV99N3
3,24
R289
H_PECI
35 17
BAT_VOLT
Gary
SUSB# 21,28,30,32,33,41,42 DGPU_RST# 13 SUSC# 21,30,39
43_1%_04
EC_H_PECI_R
SMC_CPU_THERM R516
20 SMC_CPU_THERM
*0_04
A PCLK_KBC
R280
C412
*10p_50V_NPO_04
C403
1u_6.3V_X5R_04
C480
1u_6.3V_X5R_04
*10_04
A
AC D24 BAV99N3
BAT_VOLT
A
B
RSMRST# 21 KBC_RST# 24
47 48
*10K_04 *10K_04 *10K_04
C
DD_ON 28,40,41 *100K_04 VDD3 D03_լՂٙ 0_04
A
C
For Auto load code D01a_1009_Alex R300
AC D21 BAV99N3
SMD_BAT
W LAN_CON_POW ER 29
107
R291 R312 R1003
C
USB_CHARGE_EN 28,40,41 BT_EN 29 BKL_EN 14 0_04 FB_CLAMP 13,24 0_04
R317 R318
*10K_04
KBC_AC/BATL# W LAN_DET# DGPU_RST#
D06 for NV & AMD MXM card ٥ش
C SMC_BAT
R306
VDD3
R631/R632 change to 1.5K
AIRPLANE# 30,36
R497
100_04
D02A DEL J_80DEBUG1
CPU_FANSEN 30 VGA_FANSEN 30
120 R294 124 119 123
0_04
0_04
PCH_PW ROK_EC 21 ALL_SYS_PW RGD 14,21,44
Gary D03 Update for TPLED TP_PW R_EN# 35 R642 PME# 22,37
19
SW I#
112
D02A DEL U39,NC4,C734,R499,R504,C159,R285,R286,R287,R288
21
PMOSFET_CONTROL# 45
2 128 R307
10K_04
DD_ON_LATCH 41
D01a_1009_Alex R842 R843 R844 R845
0_04 0_04 0_04 0_04
HSPI_CE# 20 HSPI_SCLK 20 HSPI_MSO 20 HSPI_MSI 20
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
For ITE IT8587B Reserve
Title
KBC_AGND Size A3
*0.1u_16V_Y5V_04
4
3.3V
2 *OPEN_10mil-1MM
R664 10K_04
IT8587E/CX 12/06 value᧢ ޓGary
SHORT
R278
X
X
P150SM-A
VOLTAGE
RB
R277
14,32,33,44 5VS 13,19,20,21,23,24,25,26,27,29,36,37,40,41,42,45,46 VDD3 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,32,33,35,36,37,41,44,46,61 3.3VS C406
MODEL_ID
C
100 101 102 103 104 105 106
KBC_SPI_CE# KBC_SPI_SCLK KBC_SPI_SO KBC_SPI_SI NC3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 25 26
KB-SO0 KB-SO1 KB-SO2 KB-SO3 KB-SO4 KB-SO5 KB-SO6 KB-SO7 KB-SO8 KB-SO9 KB-SO10 KB-SO11 KB-SO12 KB-SO13 KB-SO14 KB-SO15 KB-SO16 KB-SO17
D
1u_6.3V_X5R_04
TOTAL_CUR
WAKE UP
PS2CLK0/GPF0( PU ) PS2DAT0/GPF1( PU ) PS2CLK1/GPF2( PU ) PS2DAT1/GPF3( PU ) PS2CLK2/GPF4( PU ) PS2DAT2/GPF5( PU )
36 37 38 39 40 41 42 43 44 45 46 51 52 53 54 55
KB-SI0 KB-SI1 KB-SI2 KB-SI3 KB-SI4 KB-SI5 KB-SI6 KB-SI7
4 5 6 8 11 12 14 15
KB-SI0 KB-SI1 KB-SI2 KB-SI3 KB-SI4 KB-SI5 KB-SI6 KB-SI7
KBC_W RESET# C409
Value᧢ ᧢ ޓGary J_P17KB1 85219-2607N 24 KB-SI0 23 KB-SI1 22 KB-SI2 21 KB-SI3 20 KB-SI4 19 KB-SI5 18 KB-SI6 17 KB-SI7
D02 12/03 J_P15KB1 85219-2607N 24 23 22 21 20 19 18 17
Gary 10/17(٥شᒵሁFix net name)
GPIO
SMBUS SMCLK0/GPB3 SMDAT0/GPB4 SMCLK1/GPC1 SMDAT1/GPC2 SMCLK2/GPF6( PU ) SMDAT2/GPF7( PU ) PWM0/GPA0( PU ) PWM1/GPA1( PU ) PWM2/GPA2( PU ) PWM3/GPA3( PU ) PWM4/GPA4( PU ) PWM5/GPA5( PU ) PWM6/GPA6( PU ) PWM7/GPA7( PU )
58 59 60 61 62 63 64 65
For Auto load code
FLASH
ADC0/GPI0 ADC1/GPI1 ADC2/GPI2 ADC3/GPI3 ADC4/GPI4 ADC5/GPI5 ADC6/GPI6 ADC7/GPI7
LCD_BRIGHTNESS
15 BRIGHTNESS
KSO0/PD0 KSO1/PD1 KSO2/PD2 KSO3/PD3 KSO4/PD4 KSO5/PD5 KSO6/PD6 KSO7/PD7 KSO8/ACK# KSO9/BUSY KSO10/PE KSO11/ERR# KSO12/SLCT KSO13 KSO14 KSO15
GA20/GPB5 KBRST#/GPB6( PU ) PWUREQ#/GPC7( PU ) L80LLAT/GPE7( PU )
R281
0_04 FOR IT8512CX/EX 0.1U_04 FOR ITE8512-J(ITE8502-J 8587A լՂ
74
3 VBAT
WRST#
1 12 27 49 91 113 122
45 LOT6_CHG 3 H_PROCHOT#_EC
KSI0/STB# KSI1/AFD# KSI2/INIT# KSI3/SLIN# KSI4 KSI5 MATRIX KSI6 KSI7
K/B
P151
Date: 3
2
[34] KBC-ITE IT8587A Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
34
of
66
1
KBC-ITE IT8587A B - 35
B.Schematic Diagrams
KBC_W RESET#
LAD0 LAD1 LAD2 LAD3 LPCCLK LFRAME# LPC SERIRQ LPCRST#/WUI4/GPD2( PU )
AVSS
PCLK_KBC
P150,P157 P170,P177 Backlight KB Backlight KB
J_P151KB1 85208-24051
75
20,30,46 LPC_AD0 20,30,46 LPC_AD1 20,30,46 LPC_AD2 20,30,46 LPC_AD3 27 PCLK_KBC 20,30,46 LPC_FRAME# 20,30,46 SERIRQ 16,22,29,30,37 BUF_PLT_RST#
VCC
U16
10 9 8 7 13 6 5 22
D05 J_KB1=>J_P151KB1 J_KB2=>J_P15KB1 J_KB3=>J_P17KB1
AVCC
M740T/TU
26 50 92 114 121 127
0_04 for M760T/TU BKP1005HS121_04 for EMI Solution
VSTBY VSTBY VSTBY VSTBY VSTBY VSTBY
.
D
100K_04 EC_VCC
VSS VSS VSS VSS VSS VSS VSS
3.3VS
KBC_AGND
0.1u_16V_Y5V_04
11
L54
Schematic Diagrams
Backlight Keyboard 5
4
3
D25 KB_LEDPWR_IN
L4
BCIHP0420TB-2R2M
KB_LEDPWR_SW
A
C
U4 FMS3004-AS-H
KB_LEDPWR_FREQ *10mil_short KB_LEDPWR_EN 10_04
R538 R53
3 10
C20 10u_6.3V_X5R_06
FREQ
SS
FB COMP
C374
6 7 R1
2
R551 200K_1%_06
SHDN
4 5 11
C407 15000p_50V_X7R_06
LX1 LX2
1
R588 0_04
R549 14.3K_1%_06
D05A Del R588
G5110 1.24x[(R1/R2)+1]
J_KBLED2
1 2 3 4 5 6 7 8 9 10 11 12
P150SM,P157SM
C307
D05 Add C307 1u_6.3V_X5R_06
D
9
12/06 value᧢ ޓGary KB_LED_PWR R567 0_08 KBPWR_G R568 49.9_1%_08 KBPWR_R KBPWR_B R566 0_08 KBZONE1_B C855 KBZONE1_R KBZONE1_G 4.7u_25V_X5R_08 KBZONE2_B KBZONE2_R KBZONE2_G KBZONE3_B KBZONE3_R KBZONE3_G
KB_LED_PWR_FB
footprint 08->06 R54 100K_04
1u_6.3V_X5R_06
D02 12/03 Value᧢ ᧢ ޓGary C314 10p_50V_NPO_04
88511-1241 D02_1112_Alex
3.3VS D04_Reflash_0902_Alex R1033
*15mil_short
13,15,32,34 13,15,32,34
C992 R1052
R1051
R1050 *10K_04
C991
R1054 R1055
SMC_VGA_THERM SMD_VGA_THERM
0_04 0_04
*0_04
0_04
R1059 R1058
2 3 4 5 6 28 29 27 30 31 1 9 14 19 24
VDD A0 A1 A2 A3 A4 A5 A6 OE# SCL SDA VSS VSS VSS VSS VSS
9
P150SM-A_D01_Alex
U78
32
*0_06
10K_04
R1034
10K_04
5VS
C
0.1u_10V_X5R_04
Sheet 35 of 66 Backlight Keyboard
C293 330p_50V_X7R_04
0.1u_10V_X5R_04
LED0 LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 LED9 LED10 LED11 LED12 LED13 LED14 LED16
7 8 10
R580 R581 R589
49.9_1%_06 49.9_1%_06 49.9_1%_06
KBZONE1_B KBZONE1_R KBZONE1_G
11 12 13
R590 R594 R595
49.9_1%_06 49.9_1%_06 49.9_1%_06
15 16 17
R599 R613 R614
49.9_1%_06 49.9_1%_06 49.9_1%_06
KBZONE2_B KBZONE2_R Gary D03ଥ(إnet᧢)ޓ KBZONE2_G TPLED_B TPLED_R KBZONE3_B TPLED_G KBZONE3_R KBZONE3_G
18 20 21
R667 R674 R767
0_06 0_06 0_06
TPLED_B TPLED_R TPLED_G
22 23 25 26
R769 R770 R771
0_06 0_06 0_06
TPLED_B1 TPLED_R1 TPLED_G1
5VS
12/06 Value᧢ ޓGary KB_LED_PWR R182 KBPWR_G_1 0_08 R46 49.9_1%_08 KBPWR_R_1 R140 0_08 KBPWR_B_1 J_LED4 KBZONE1_B C854 KBZONE1_R 1 KBZONE1_G 4.7u_25V_X5R_08 2 KBZONE2_B 3 KBZONE2_R 4 KBZONE2_G 5 KBZONE3_B 6 D02 12/03 Value᧢ ᧢ ޓGary KBZONE3_R KBZONE3_G 50501-0064N D02 12/03 Value᧢ ᧢ ޓGary D02 12/03 Value᧢ ᧢ ޓGary
P170SM,P177SM
P157SM
5+5
88511-1241
5VS_TP
IT7040
96mA
120mA 225mA
106mA
132mA 225mA
98mA
122mA 225mA
C45 C46
D01A_1016_Alex
SYS15V
NMOS
5VS
Q65 6 P2703BAG 5 2 4 1
R687 1M_04
Gary D03ᄅᏺ0103
TPLED_B TPLED_R TPLED_G
5VS_TP
3A R688
3
3
Q124A G2 TP_PWR_EN# 5G MTDN7002ZHS6R
88511-1241 D Q124B MTDN7002ZHS6R
Title
14,32,33,44 5VS 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,32,33,34,36,37,41,44,46,61 3.3VS 40,41,42 SYS15V
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
S
ON
3
1 2 3 4 5 6 7 8 9 10 11 12
TPLED_B1 TPLED_R1 TPLED_G1
34 TP_PWR_EN#
4
J_TPLED1
4.7u_6.3V_X5R_06
4
6
D C130 2200p_50V_X7R_04 S
>40mil
499_1%_04
C128
A
B
Gary D03ଥ إ0103 5 pin
10u_6.3V_X5R_06
࣠ڕլቃఎEC pin ൳ࠫPCA9622, ,OE# pull low.
P177SM
4+4
0.1u_16V_Y5V_04
LED Q'ty Total Current (BLUE 12mA/LED) Total Current (RED 13.2mA/LED) Total Current (GREEN 12.2mA/LED)
34 EC_CTRL_EN#
B - 36 Backlight Keyboard
C
1 2 3 4 5 6 7 8 9 10 11 12
TouchPAD LED Current
PCA9622 B
5
J_KBLED1
D02_1112_Alex
1
B.Schematic Diagrams
9
IN GND GND GND_Thermal
8
KB_LEDPWR_IN
D
KB_LED_PWR
4.7u_25V_X5R_08
2 OPEN_2A
.
1 PJ11
1
15V
DEFAULT PJ11 SHORT 5VS
2
Size P157SM TP LED Date: 2
[35] BACKLIGHT KEYBOARD Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
35 1
of
66
Schematic Diagrams
mSATA, FAN, TP, FP, MULTI-CON 5
4
3
2
FOR CLICK BOARD
1
P17&P15٥ش
FOR HDD&ODD BOARD 5VS
P17&P15٥ ٥ش 5VS
ئஆ
D
SATA_ODD_PRSNT# SATA_ODD_DA#
24 SATA_ODD_PRSNT# 22 SATA_ODD_DA# 5VS 3.3VS
2 4 6 8 10 12 14 16 18 20
5VS
J_SATA_HODD1 1 1 3 3 5 5 7 7 9 9 11 11 13 13 15 15 17 17 19 19
2 4 6 8 10 12 14 16 18 20
D02A Change SATA4 to SATA3
J_TP1
SATA_TXP3 19 SATA_TXN3 19
1 2 3 4 5 6 7 8 9 10
SATA_RXN3 19 SATA_RXP3 19 SATA_TXP1 19 SATA_TXN1 19 SATA_RXN1 19 SATA_RXP1 19
C1943
TP_CLK TP_DATA
R633
R634
C749
10K_04
10K_04
*10U_10V_08
D
TP_CLK
TP_CLK 34 3.3VS TP_DATA 34
TP_DATA C750
C751
47p_50V_NPO_04 47p_50V_NPO_04
USB_PN2 23 USB_PP2 23
85201-10051
mSATA
mSATA_3.3V
>40 mil R677 *32mil_short C612
C687 J_mSATA1
*10u_10V_Y5V_08
1 3 5
*0.1u_16V_Y5V_04
C
1.5VS
7 11 13 9 15
mSATA_1.5VS
R989
*32mil_short
WAKE# COEX1 COEX2
2 6 8 10 12 14 16
3.3VAUX_0 1.5V_0 UIM_PWR UIM_DATA UIM_CLK UIM_RESET UIM_VPP
CLKREQ# REFCLKREFCLK+ GND0 GND1
40 mil mSATA_3.3V mSATA_1.5VS
0.1u_16V_Y5V_04
4
GND5
C
C608
Sheet 36 of 66 mSATA, FAN, TP, FP, MULTI-CON
GND
C837 GND
KEY
0.1u_16V_Y5V_04
21 27 29
GND
mSATA I/F mSATA_RXP5_R mSATA_RXN5_R mSATA_TXN5_R mSATA_TXP5_R
C838 C839 C840 C841
mSATA_3.3V
0.01u_16V_X7R_04 0.01u_16V_X7R_04 0.01u_16V_X7R_04 0.01u_16V_X7R_04
40 mil C634
B
C660
0.1u_16V_Y5V_04
10u_10V_Y5V_08
GND R604
19,24 mSATA_DET#
35 23 25 31 33 17 19 37 39 41 43 45 47 49 51
GND
GND2 GND3 GND4
18 26 34 40 50
GND6 GND7 GND8 GND9 GND10
GND11 PETn0 PETp0 PERn0 PERp0 Reserved0 Reserved1 GND12 3.3VAUX_3 3.3VAUX_4 GND13 Reserved2 Reserved3 Reserved4 Reserved5
GND
20 22 30 32 36 38
W_DISABLE# PERSET# SMB_CLK SMB_DATA USB_DUSB_D+
C688
mSATA_1.5VS
0_04
NEAR TO J_mSATA1
R1031 R1023 R1025
*100K_04 *100K_04 *100K_04
R1027 R1029
*100K_04 *4.7K_04
RX_0P RX_0N
TX_0P TX_0N
B
LID_SW #
LID_SW #
DEVICE RX_1N RX_1P
15 14
mSATA_TXP5_R mSATA_TXN5_R
12 11
mSATA_RXN5_R mSATA_RXP5_R
P157SM P177SM P170SM
A
VDD3 3.3VS 3.3V 5VS 1.5VS
3.3VS
R1024 R1026
*4.7K_04 *4.7K_04
R1028 R1030
*4.7K_04 0_04
13,19,20,21,23,24,25,26,27,29,34,37,40,41,42,45,46 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,32,33,34,35,37,41,44,46,61 2,14,19,29,30,32,37,39,41,42 14,32,33,44 16,18,19,21,23,25,26,27,39
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
Title Size A3
Reserve 12/03 5
14,29,34
VDD3
GND GND EQ1 GND EQ2
HOST TX_1N TX_1P
SDA SCL
mSATA_RXN54 mSATA_RXP55
T-PAD
mSATA_TXP51 mSATA_TXN52
0.01u_16V_X7R_04 0.01u_16V_X7R_04
3.3VS
Layout note:
D01a_1016_Alex
GND
3 13 17 18 19
0.01u_16V_X7R_04 0.01u_16V_X7R_04
C844 C845
21
C842 C843
8 9 DE2 R1022 *2K_1%_04 DE1
1u_6.3V_X5R_04
0.1u_16V_Y5V_04
0.01u_16V_X7R_04
A
dGPU_PW R_EN# 13,30,34 LED_NUM# 30,34 LED_CAP# 30,34 LED_SCROLL# 30,34 M_BTN# 41
R675
3.3VS mSATATXP5 mSATATXN5
dGPU_PW R_EN# LED_NUM# LED_CAP# LED_SCROLL# M_BTN#
R671 12/06 Change شற Gary U55 4.7K_04 SN75LVCP601 7 EN
DEW2 VDD DEW1 VDD
6 10 16 20
Note:
Closed to U55
mSATARXN5 mSATARXP5
0.1u_16V_Y5V_04
5VS Gary 10/17(٥شᒵሁFix net name) AIRPLANE# AIRPLANE# 30,34 SATA_LED# SATA_LED# 19,30
87151-15051
*0_04
R678 0_04
Layout Note:
19 19
C718
3.3VS GND
19 19
mSATA_3.3V
40 mil C661
10u_10V_Y5V_08
0710A0BA99C
mSATA REDRIVER
C488 C489 C490
10u_10V_Y5V_08 GND
24 28 48 52 42 44 46
3.3VAUX_1 1.5V_1 1.5V_2 3.3VAUX_2 LED_WWAN# LED_WLAN# LED_WPAN#
3.3VS J_P17PW R1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
4
Date: 3
2
[36] mSATA,FAN,TP,FP,MULT CON Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
36
of
66
1
mSATA, FAN, TP, FP, MULTI-CON B - 37
B.Schematic Diagrams
3.3V
Schematic Diagrams
Card Reader RTL8411 1
2
3
4
5
6
R457
0_06
VDD10
(>20mil)
PULL HIGH: SWR Mode
L35 R293
2.49K_1%_04
REGOUT
.
RSET
Crystal 8045 & 3225 Co-lay meet realtek Freq tolerance 50ppm
VDD10
ENSWREG C241
C229
*4.7u_6.3V_X5R_06
*0.1u_16V_Y5V_04
73 72 71 VDD10
65
MDIP0 MDIN0 AVDD10 MDIP1 MDIN1 MIDP2 MDIN2 AVDD10 MDIP3 MDIN3 AVDD33 DVDD33 Card_3V3 SD_D7 SD_D6/MS_INS# SD_D5 GND8 GND7 GND6
C291
C227
1u_6.3V_X5R_04
0.1u_16V_Y5V_04
PIN13
PIN61
VDD33/18 VDD10 EECS
LED1/EESK
AVDD33
SD_CD#
MS_D0
DVDD33 FOR S5 WAKE UP ON LAN R462 0_04
BIOS pulls high or low to GPO pin, Pkease refer to LAN/PHY Disable Application Note.
RTL8411-CG
C D29 C D20
DVDD33
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
REGOUT ENSWREG LED2/EEDI LED3/EEDO LED_CR LANWAKEB
REGOUT D3V3 D3V3
R480
R479
1.5K_04
10K_04
PME#
22,34
GPIO27
VDD10
VDD10
EVDD10
VDD10
C297
C223
C225
C226
1u_6.3V_X5R_04
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
PIN3
PIN8
PIN41
PIN52
VDD33/18
VDD33/18
VDD33/18
SD_D1/MS_CLK_R
0_04
SD_D2_R
SD_CLK
R470
0_04
SD_CLK/MS_D3_R
SD_D3
R471
0_04
SD_D3/MS_D2
24
PCIE_WAKE# 21,29
Close to chip
1K_04
3.3VS
Remind that R109 using the main power (S0 power).
R481 15K_04
A
C242
C269
C274
C282
C283
SD_D0_R;SD_D1/MS_CLK_R;SD_D2_R;SD_D3/MS_D2;SD_CLK/MS_D3_R ߨ փ ᐋ . VCC_CARD
*10mil_short
C284
C285
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04 B
BUF_PLT_RST# 16,22,29,30,34
DVDD33
3.3V VCC_CARD
RTL8411 command
R477
R492
10K_04
*10K_04
R475
0_04
LAN_CLKREQ# 27
C635
0.1u_10V_X7R_04
C636
0.1u_10V_X7R_04
C679
0.1u_16V_Y5V_04
*4.7u_6.3V_X5R_06
PCIE_RXN3_GLAN 23 PCIE_RXP3_GLAN 23
CARD_3V3
CLK_PCIE_GLAN# 27 CLK_PCIE_GLAN 27
R553
*20mil_P_04
VCC_CARD
D06 15mil-->20mil R554
PCIE_TXN3_GLAN 23 PCIE_TXP3_GLAN 23
VDD33/18
C658
Near Cardreader CONN
C635 & C636 capacitors must be close to pin side. VDD10
SD_D0_R
0_04
R468
TO EC8518 PIN123 PME#.
VDD10
DVDD33 ISOLATEB PERSTB R552 CLKREQB SD_WP/MS_D1 MS_BS VDD33/18
0_04
R467
SD_D2
TO SB PCH WAKE#.
DVDD33 R472
D05 R480 0603->0402
REGOUT VDDREG VDDREG ENSWREG_H SDA/SPIDI LED3/SPIDO SCL/LED_CR DVDD10 LANWAKEB DVDD33 ISOLATEB PERSTB CLKREQB SD_WP/MS_D1 MS_BS VDD33/18
A *RB751V-40(lision) A RB751V-40(lision)
SD_D4 SD_D1 SD_D0 SD_CLK SD_CMD SD_D3 SD_D2
66 67 68 69 70
CARD_3V3
VDD10
AVDD33 SD_D7 MS_INS# SD_D5
10K_04
ၦขᒔᎁ৵ሽॴ,ޏ ޏSHORTሿ ሿٙ
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
XTAL2 XTAL1
LAN_MDIP3 LAN_MDIN3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
R456
AVDD33 AVDD33 RSET AVDD10 CKXTAL2 CKXTAL1 AVDD33 XD_CD# MS_D0/xD_D1 MS_D4 SD_CD#/MS_D5 VDD33/18 DVDD10 LED0/SPICSB GPO LED1/SPISCK
GND 31 31 B
LAN_MDIP1 LAN_MDIN1 LAN_MDIP2 LAN_MDIN2
GND1 GND2 GND3 GND4 GND5
LAN_MDIP0 LAN_MDIN0
LAN_MDIP0 LAN_MDIN0 VDD10 LAN_MDIP1 LAN_MDIN1 LAN_MDIP2 LAN_MDIN2 VDD10 LAN_MDIP3 LAN_MDIN3 AVDD33 DVDD33 CARD_3V3
*1K_04
R466
SD_D1
5p_50V_NPO_04
U37
ၦขᒔᎁLDO MODE OK৵ ৵, ޏSHORTሿ ሿٙ
ழ: L37,C451,C458լ լՂٙ,R80Ղ Ղٙ LDO Modeழ R396
ᒔᎁݙ,ޏ ޏSHORT ৱEMIᒔ SD_D0
5p_50V_NPO_04
30p_50V_NPO_04
31 31 31 31
0_04
5p_50V_NPO_04
C232
30p_50V_NPO_04
31 31
R465
VDD3
5p_50V_NPO_04
C230
8
5p_50V_NPO_04
B.Schematic Diagrams
DEL X12 Gary 10/17(Fix X'tal accuracy)
Sheet 37 of 66 Card Reader RTL8411
*0_04
PULL LOW: LDO Mode
1 FSX5L_25MHZ
SD_D4 SD_D1/MS_CLK SD_D0/MS_D7 SD_CLK/MS_D3 SD_CMD/MS_D6 SD_D3/MS_D2 SD_D2 GND HSIP HSIN REFCLK_P REFCLK_N EVDD10 HSOP HSON GND
X11 2
XTAL1
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
A
1M_04
R464
(>20mil)
*SWF2520CF-4R7M-M
XTAL2 R282
7
Switching Regulator close to PIN48
LAN (RTL8411)
150_06
R557 *150_06
meet falling time 1ms
C343
0.1u_16V_Y5V_04
1u_6.3V_X5R_04
PIN29
PIN29
L32 HCB1608KF-121T25
.
VDD3
SD_CD# SD_D1/MS_CLK_R SD_D0_R
*5p_50V_NPO_04
EVDD10
MS_BS SD_CLK/MS_D3_R SD_WP/MS_D1 MS_D0 VCC_CARD
AVDD33
SD_D3/MS_D2 C392
R514
*15mil_short
MS_INS# SD_CLK/MS_D3_R SD_CMD SD_D1/MS_CLK_R
0.1u_16V_Y5V_04 L33 *HCB1608KF-121T25
3.3V
.
C193
C196
C209
C210
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
PIN63
PIN64
PIN11
PIN58 DVDD33
D
C211
SD_D3/MS_D2 C397 SD_D2_R
0.1u_16V_Y5V_04
PIN39 D3V3
C378
C215
10u_6.3V_X5R_06
*0.1u_16V_Y5V_04
PIN46
PIN47
Title
LDO Mode 3.3V 3.3VS VDD3
2,14,19,29,30,32,36,39,41,42 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,32,33,34,35,36,41,44,46,61 13,19,20,21,23,24,25,26,27,29,34,36,40,41,42,45,46
B - 38 Card Reader RTL8411
D
3
4
5
6
[37] RTL8411 CardReader
Size Document Number Custom Date:
2
P23 P24
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
*15mil_short
close to pin 12 1
GND1 GND2
0.1u_16V_Y5V_04
PIN12
60 mil
SD_WP SD_GND SD_C/D SD_DATA1 SD_DATA0 SD_VSS2 MS_VSS2 MS_BS SD_CLK MS_DATA1 MS_DATA0 SD_VDD MS_DATA2 SD_VSS1 MS_INS MS_DATA3 SD_CMD MS_SCLK MS_VCC SD_DATA3 MS_VSS1 SD_DATA2 CM3S-092-H-D main: CM3S-092-H-D second: 72740123113
C214
0.1u_16V_Y5V_04
R523
VCC_CARD
The DVDD33 rise time must be controlled between 1mS and 100mS.
60 mil
P22 P21 P20 P19 P18 P17 P16 P15 P14 P13 P12 P11 P10 P9 P8 P7 P6 P5 P4 P3 P2 P1
7
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
37 8
of
66
Schematic Diagrams
USB 3.0 5
4
3
2
1
USB3.0 PORT2 D05 DEL L82
+
C237 220u_6.3V_6.3*6.3*4.2
USBVCC3.0_2
D
J_USB3_2
CLOSE TO CONNECTOR USB3_TXP2
23 23
USB3_TXN2 USB_PN1
23 23
USB_PP1 USB3_RXP2
23
USB3_RXN2
C268
0.1u_10V_X7R_04 Z2804 L29
C266 4
0.1u_10V_X7R_04 Z2805 3
1
9 1 8 2 4 3 6 7 5
2
*WCM2012F2S-161T03
USB3.0 Max Trace length < 4"
R134
0_04
R135
0_04
SSTX+ SHIELD VBUS SSTXDGND D+ SSRX+ GND_D SSRX- SHIELD
GND1
GND2
Sheet 38 of 66 USB 3.0
317AH09FZTS494CB
D05 Add R134, R135
C
D05A Del L29 R134, R135 Ղ0_04
C
D05 Del R88 & USB_OC#1
USBVCC3.0_2 U14 5 2
5V
3 28,29,39,41 DD_ON#
R131
D05 R131 change to short
*10mil_short_04
4
FLG# VOUT1 VIN1
VOUT2
VIN2
VOUT3
EN#
GND
6
100 MIL
7
C199
C192
8
0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04
1
AP2301M8G-13 C262 10u_10V_Y5V_08
2A/90mohm ޏM-MSOP8 Stanley
B
B
A
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ 5V
13,28,29,32,39,41,42
Title
[38] USB3.0 port2
Size
Document Number SCHEMATIC1
A4 Date: 5
4
3
2
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
38
of
66
1
USB 3.0 B - 39
B.Schematic Diagrams
23
Standard-A
D
Schematic Diagrams
DDR 1.35V/0.75VS PCH 1.5V 3
PR135
21
1
PC46
LL
20
PR144 5V
PGOOD
VDDQSNS
S5
VDDQSET NC 7
S3
13
10
PC50
PR153
PC126 PC125 +
*5.1_06
PR79
5V
10K_1%_06
*0_04
DDR1.5V_PWRGD
DDR1.5V_PWRGD
MTN7002ZHS3
G 1
S
100K_04
MTN7002ZHS3
DDR1.5V_PWRGD
100K_04
PQ8 2SK3018S3
28,29,38,41
PC341
G
PC123
PR186 100_04
B
PQ9 BTN3904
ኔᎾၦྒྷሽᚘଖ(़ሉ)
8.2K_1%_04
PC53 PQ76 MTN7002ZHS3 G
PJ16 *40mil
G S
21,30,34 SUSC#
PR185
DDR GPIO OUTPUT VOLTAGE SELECT
21
PR146
ᐈ৫ףՕ8mil PQ50
PR184 100K_04
VDDQ
HOST_ALERT#2
D02_1107_Alex PR150
3.3V
0_06
100K_04
PC51
PC124
VDDQ
Gary D03ଥޏ0103 PR149
0.1u_16V_Y5V_04
S
*1000p_50V_X7R_04
PR48 *10K_04
VTTEN
G
3.3V
PR192
PQ62 SUSB
P/N 6-06-05822-061 Stanley 3/14
2
10K_04
PC83
D
PR68
D
5V
G
PR140 2.2_04
11
+
PD8 FM5822
G
330u_2.5V_6.6*6.6*4.2
15 14
*10K_1%_04 PR145
PQ12 *MDU1512 ULTRASO-8
C
PQ11 MDU1512 ULTRASO-8
5V
D01A
S
10K_1%_06
Gary D03ଥޏ0103 D
2 *OPEN_8A
E
COMP
VDDQSET
D C
*1000p_X5R_04
PC122
S
*MTN7002ZHS3
9
VTTREF
0_06
PR141
1u_10V_Y5V_06
G
SUSB
SUSB
8
PVCC5 VCC5
PR72
16
1u_10V_Y5V_06
PQ70 13,18,41,42
6
*22_04
*10_04
Sheet 39 of 66 DDR 1.35V/0.75VS PCH 1.5V
0_06 PR143
PR142
5V PR148
CS
0.1u_10V_X5R_04
5
VTT_MEM
MODE
18 17
D
PC84
PGND CS_GND
GND
*0_04
GND
NC
PR138
4
25
5V
*0_04
12
0_06
PR137
PC81 *1000p_X5R_04
PC52 *100p_16V_Y5V_04 PQ40
0.22u_10V_X5R_04
PCH_GPIO46
ICC_EN#
DDR Vout
0
0
0
1.65V
1.645V
0
0
1
1.60V
1.604V
0
1
0
1.55V
1.553V
0
1
1
1.50V(DEFAULT)
1.511V
1
0
0
1.50V
1.499V
1
0
1
1.45V
1.458V
1
1
0
1.40V
1.407V
1
1
1
1.35V
1.366V
C
*MTN7002ZHS3
DD_ON#
VDDQSET D01a_1011_Alex 3.3V
D01a_1011_Alex
PR107
PR81
150K_1%_04 NEED Check VQQDSET Stanley
ངG5719 Stanley
3.3V
3 2
D02 12/03 Value᧢ ᧢ ޓGary
2A
1
27 ICH_GPIO46 1.5VS
2
4 6
PR170 0_04
PC104 S
1u_6.3V_X5R_04
5V D02 12/03 Value᧢ ᧢ ޓGary
PR169 *10K_04
PR168 100K_04
PJ36
1
2 *40mil
2
PJ31 *CV-40mil
S
D
S
PQ101B MTDN7002ZHS6R
PR171 PQ101A 100K_04 MTDN7002ZHS6R
PJ23 *CV-40mil
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title
[39] DDR 1.35V/0.75VS PCH 1.5V 6-71-P15S0-DA3A
Size Document Number Custom SCHEMATIC1 Date:
3
PR165 PR167 42.2K_1%_04 *41.2K_04
5G D
2G D02_1107_Alex
16,18,19,21,23,25,26,27,36 1.5VS 13,28,29,32,38,41,42 5V 13,14,40,41,42,44,45 VIN 3,4,6,9,10,11,12,30 VDDQ 2,14,19,29,30,32,36,37,41,42 3.3V 9,10,11,12 VTT_MEM
B - 40 DDR 1.35V/0.75VS PCH 1.5V
PQ19B MTDN7002ZHS6R S
D
PQ19A MTDN7002ZHS6R
*40mil 3.3V
24 PCH_GPIO24
4
D
5G
1
PL22 PJ5 BCIHP0420TB-2R2M 1 2 1 2 PC328 PC329 *OPEN_2A
A
5
100K_04
1
LX GND
PC105 2G S 1u_6.3V_X5R_04 3.3V PQ18A MTDN7002ZHS6R PR84 *10K_04 2G
2
VFB
G5719TB1U PR371 13.3K_1%-04
PR80
3
NC
4
4
6 PJ35
VIN
B
PQ18B MTDN7002ZHS6R
4
6
EN
S
1
2 *40mil
D02_1117_Alex
5
*47P_6.3V_Y5V_04
1
ICC_EN#
PU29
1
PR370 20K_1%_04
PC327
24
5G D
2
2200p_50V_X7R_04
PJ34
6
PC326
10u_10V_Y5V_08
PC323 PQ99 2N7002_D
G
10u_10V_Y5V_08
1M_04
PR110 100K_04
5V
*10u_10V_Y5V_08
PR369
*1u_6.3V_Y5V_04
SUSB
10u_10V_Y5V_08
EN1.8VS
D 13,18,41,42
PC325
10K_04
1
PC324 PR368
D
3
3
3.3V 100K_04
5V
64.9K_1%_04
PR108
1
B
S
B.Schematic Diagrams
PR139
A
DRVL
0_06
3 VDDQ_R
D
VTTSNS
PC139
3.3V
PJ15
1
S
*10u_10V_Y5V_08 *10u_10V_Y5V_08
19
D
2
0.1u_16V_Y5V_04
20A Short
VDDQ_R PC125,PC126 ޏ330uf H=4.2 Stanley 5/21
PR136
0.1u_16V_Y5V_04
22u_6.3V_X5R_08
VTTGND
0.1u_16V_Y5V_04
PR64 0_06
S
PC120
0.1u_16V_Y5V_04
1.35V PL6 1.0UH_10*10*4.5 1 2
0_06 PC121
EMI
PC127
*0.1u_10V_X5R_04
DRVH
*OPEN_2A
VDDQ
PC128
D
VTT
0.1u_10V_X5R_04
22
PC54
S
24
VBST
PC42
330u_2.5V_6.6*6.6*4.2
1
VLDOIN
PC118
C
2A
PC119
4.7u_25V_X5R_08
G
D
2
RB0540S2
PC82
23
Short PJ14 VTT_MEM
C
S
VDDQ_R PC48 10u_10V_Y5V_08
VTT_MEM D
A
5V PU8 uP6163
1
VIN
0.1u_50V_Y5V_06
1.35V/0.75VS
2
PQ10 MDU1516 ULTRASO-8
4.7u_25V_X5R_08
PD3
0.1u_50V_Y5V_06
4
D
5
Thursday, March 06, 2014
Sheet 1
39
of
Rev 1.0 66
A
Schematic Diagrams
VDD3, VDD5 5
4
3
D
2
1
D
VREF
PR116
*0_04
PR115
0_04 PC98 1u_10V_Y5V_06 PR114
EN_3V
EN_5V
1 EN1
24
8
5.6u_25V_B_A 1u_6.3V_X5R_06 PQ47 MDV1526URH PC85
8A
9
0.1u_50V_Y5V_06
4 PL8 BCIHP0730-2R2M 2 1 PC140
1 2 3
21 20
C
FM5822 PD17 A C
*5mm
for EMI D01A
Rb
18.7K_1%_06
*0_04
VIN1 PD7 VIN
B
0_04
C
PC76
*0_04 PC79
A
SYS5V
2
SYS10V
0.01u_16V_X7R_04 VREG5
0.1u_16V_Y5V_04
PC74
PC78
A 4.7u_25V_X5R_08
PD19 BAT54SS3 A 1
3 C
2.2_06
0_04
PR83
PR88
M990125 PR82
PC92
+
PR122
PR96
*680K_1%_04
VREF
2
30K_1%_06
EN_ALL
VREG5
VDD5 PJ19
1
*1000p_50V_X7R_04
PR91 PR89
10 A
PR121
*1000p_50V_X7R_04 PC96
PR154 *5.1_06
5 5 5 5
18
LDO5 17
4
VDD5
SYS5V
Ra
PQ98 MDV1524URH
19
VCLK
LGATE1 VIN
GND PAD GND
3 2 1
PHASE1
16
LGATE2
A
220u_6.3V_6.3*6.3*4.2
PR117 20K_1%_04
PR155 *5.1_06
13K_1%_06
100p_50V_NPO_04
+
PHASE2
12
13
0.1u_16V_Y5V_04
PC177
PQ97 MDV1526URH
4
PD16 FM5822
25 15
PC97
SKIPSEL
5 5 5 5
C
PC94 PR123
22
+
0.1u_10V_X7R_04
UGATE1
1 2 3
11
PC141
for EMI *1000p_50V_X7R_04
*5mm
BOOT1
uP6182
UGATE2
EN0
1
10
PC99
PQ48 MDV1526URH
Sheet 40 of 66 VDD3, VDD5
5.14V
P150SM-A_D01_Alex
SYS5V
3 2 1
PL10 BCIHP0730-4R7M 2 1
PJ20
2
BOOT2
0.1u_10V_X7R_04
SYS3V
23 PC88
4 VDD3
POK
14
C
LDO3
5 5 5 5
5 5 5 5
VDD3
*10K_04
PC172
PR105
220u_6.3V_6.3*6.3*4.2
3
2 VFB1
VREF
VIN
VO1
PC90
PC174
VO2
PU7
15u_25V_6.3*6.3*4.2
7
TONSEL
6 EN2
VIN + PC178
PC95 1000p_50V_X7R_04
124K_1%_04
5
D01A VREG3
VFB2
DEL P1756,PC176.ADD 5.6u_25V_B2 cap for noise 2/28 Stanley
4
120K_1%_04 1000p_50V_X7R_04
1u_6.3V_X5R_06 PC80
RB751V D01A
PD20 BAT54SS3 A 1 3 C A 2
2200p_50V_X7R_04
B
SYS15V
0.01u_16V_X7R_04
PC73 2200p_50V_X7R_04 PR119 EN_3V5V
VREG5
PR98
*0_04 EN_3V
PR113
0_04
EN_5V
Qpxfs!po!WEE40WEE6 QXN
3 D
10K_04
PQ21B DD_ON_EN_VDD
28,34,41
S MTDN7002ZHS6R D
2 G
DD_ON
5 G
6 4
1
PQ21A MTDN7002ZHS6R
PJ6 *40mil
S
PR109 100K_04
D
2
1
A
G PQ25 MTN7002ZHS3
28,34,41 USB_CHARGE_EN
S
A
DMFWP!DP/!!ᙔϺႝတ 13,19,20,21,23,24,25,26,27,29,34,36,37,41,42,45,46 28,41 35,41,42 41 13,14,39,41,42,44,45
VDD3 VDD5 SYS15V VIN1 VIN
Title Size A3 Date:
5
4
3
2
[40] VDD3,VDD5 Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
40
of
66
1
VDD3, VDD5 B - 41
B.Schematic Diagrams
PR118 PC93
Schematic Diagrams
5V, 5VS, 3.3V, 3.3VS, 1.5VS 5
4
3
2
*100K_04
R503
M_BTN#
R731 USB_CHARGE_EN
R611
10K_04
3
*100K_04
4
1K_1%_04
VIN
DD_ON_LATCH
M_BTN#
PWR_SW#
INSTANT-ON
GND
R474
100K_04
R483
*100K_04
DD_ON
USB_CHARGE_EN
6
R461
10K_04
5
R656
1K_1%_04
VDD3 PW R_SW # 34
VDD3
VDD3
10K_04
10K_04
PC179
S
MTN7002ZHS3
21,28,30,32,33,34,42
*0.1u_16V_Y5V_04
PR195
PR197
100K_04
100K_04
VA
C240
D
SUSB
13,18,39,42
PQ54
G
SUSB#
VA
C427 C619 C721
D05 C240: 0.1u_16V_Y5V_04 -> 0.01u_16V_X7R_04 C428, C570, C427, C619, C721: 0.1u_50V_Y5V_06 -> 0.01u_50V_X7R_04
SUSB
28,29,38,39
PQ61
G
DD_ON
DD_ON#
D
C
C
D
2
28,34,40
P2808A1, ߪءᄎᗈᄤ, P2808A1 ኙ D26 mounted VARISTOR.
PR193
DD_ON#
D9 for P150SM
VA
D05 PR193 100K_04 -> 10K_04
PR194
MTN7002ZHS3
S
A
A
DO4 add D9 D9 RY-SP170DNB74-5/1X
D4 for P151SM1
PC164
EMI
*0.1u_16V_Y5V_04
3.3V
3.3VS 5VS
1
3.3V
8A
C
D05 Add C600, C491, C627
Power Plane
PR196
0.01u_50V_X7R_04
PQ64A MTNN20N03Q8 8 2 7 1
1M_04
0.01u_50V_X7R_04
C626
2 0.1u_16V_Y5V_04 10u_10V_Y5V_08
G5243A
PC193
PQ71B MTNN20N03Q8
5
PQ64B MTNN20N03Q8
5
2200p_50V_X7R_04
6
D01a_1011_Alex
PC180
DD_ON#
6
470p_50V_X7R_04
DD_ON#
1
GND
4A
Power Plane
PR217 1M_04
EN
SYS15V VDD3
4
VOUT
NMOS
8A
5V
3
VIN VIN
C630
3
4A
3.3VM
U25
4 5
PQ71A MTNN20N03Q8 8 2 7 1
4
VDD3
3.3V
NMOS
SYS15V VDD5
0.01u_50V_X7R_04
5V
3.3VM
3
C
0.01u_50V_X7R_04
C600 C491 C627
D4,SW1 D9,SW1 P151SM1 P150SM
PJ21 *40mil
2 B
ON
R685
0_04
R757
*0_04
SLP_A#
R758
*0_04
DD_ON
PM_SLP_LAN#
5VS
8A
SYS15V VDD5
VDD3
8A
8A
PQ28A MTNN20N03Q8 8 2 7 1
8A
NMOS 3.3VS 8A
NMOS 5VS
SYS15V
VDD3
B
PQ60A MTNN20N03Q8 8 2 7 1
3.3VS
R224
C316
10K_04
1M_04 PQ28B MTNN20N03Q8
1 *0.1u_16V_Y5V_04
PQ60B MTNN20N03Q8
2200p_50V_X7R_04
5
SUSB
PJ9
VDD3
PR198
C614 R444 47_04 0.1u_16V_Y5V_04 10u_10V_Y5V_08
*40mil
PR201
100K_04
ON
10K_04 SLP_A
D
A
G
SLP_A#
SLP_A
PQ65 MTN7002ZHS3
S
21
PC182 *0.1u_16V_Y5V_04
PR200 100K_04
42
ON
20 3.3VM 40 VIN1 45 VA 13,14,39,40,42,44,45 VIN 6 V_VCCDDQ 3,4,6,9,10,11,12,30,39 VDDQ 16,18,19,21,23,25,26,27,36,39 1.5VS 35,40,42 SYS15V 28,40 VDD5 13,19,20,21,23,24,25,26,27,29,34,36,37,40,42,45,46 VDD3 13,28,29,32,38,39,42 5V 14,32,33,44 5VS 2,14,19,29,30,32,36,37,39,42 3.3V 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,32,33,34,35,36,37,44,46,61 3.3VS
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size A3 Date:
5
B - 42 5V, 5VS, 3.3V, 3.3VS, 1.5VS
Q27 MTN7002ZHS3
G S
PC181
13,18,39,42
C613
6
MTN7002ZHS3
SUSB
2
G
21,42 PM_SLP_LAN#
C602
5
470p_50V_X7R_04
6
D
PM_SLP_LAN PQ63
3
R284
0.1u_16V_Y5V_04
D
4
100K_04
C317
4
3
R445 1M_04 PR199
S
B.Schematic Diagrams
D02A modify R461 100K_NC -> 10K bug 61.2
C127 *0.1u_16V_Y5V_04
D02A modify value 04->06 D4 RY-SP170DNB74-5/1X
VIN
C428 C570
C339 0.1u_50V_Y5V_06
Sheet 41 of 66 5V, 5VS, 3.3V, 3.3VS, 1.5VS
28,34,40
P2808B0
*V15AVLC0402
VARISTOR 6-24-30003-006
VIN 3.3VS
DD_ON_LATCH 34
0.01u_50V_X7R_04
R458
8 7
0.01u_50V_X7R_04
20mil
D26
36
VIN1
0.01u_50V_X7R_04
220_04 for P150EM
M_BTN#
TJG-532-V-T/R
VIN
R75 220_1%_04 Gary 10/18ଥੌૻإሽॴ220_04 20mil
1
D
1 2
VA
2
0.01u_50V_X7R_04
20mil
POWER BUTTON
1
VA
P150SM-A_D01_Alex
220_04 for P151EM1
0.01u_16V_X7R_04
3.3VS
0.01u_50V_X7R_04
VIN1 U34
POWER SWITCH LED
SW 1 4 3
1
EMI
P150EM/P151EM1 only
4
3
2
[41] 5V,5VS,3.3V,3.3VS,1.5VS Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet 1
41
of
66
Schematic Diagrams
Power 1.05VS 5
4
3
2
1
For CV test
PJ33
*OPEN-1mm 2
1.05V_LAN_M PC111 0.1u_50V_Y5V_06
13
BST
2 3 1
EN_PSV
PQ80 MDS1526 PC114 0.1u_10V_X7R_04 4
5 6 7 8
PR87 0_06
15
PC59 *0.01u_16V_X7R_04
16 5V
1
PR93
TON
DH
VOUT
LX
PC113
2
PL16 BCIH1030HC-R56M 1 2 PR94 3.6K_1%_04
ILIM
VFB
VDD
10
5 6 7 8
5V
C
9
MDS1521URH
PD24
4
8
DL
PC112
G5602R41U
5
47K_04
for EMI for EMI +
PC195
P/N 6-06-05822-061 Stanley 3/14
1u_6.3V_X5R_04
2
*OPEN-10mm
*1000p_50V_X7R_04
14
C
7 17
PGND PGND
1.05V_LAN_M
1
NC
AGND NC
6
D02_1107_Alex
A FM5822
PGOOD
2 3 1
4
1u_6.3V_X5R_04
PJ13 V1.05
PR97 0_04
C
Sheet 42 of 66 Power 1.05VS
1.05V_LAN_PW RGD
21 1.05V_LAN_PW RGD
PR124
40.2K_1%_04
PC87
*15p_50V_NPO_04
1.05VM 1.05V_LAN_M PJ32 1
NMOS
3A
SYS15V
8 7
PQ66A MTNN20N03Q8 2 1
PR95 100K_1%_04
1.05VM
3A
Power Plane
PR183
B
3
B
OPEN_2A 2
1M_04
PQ66B MTNN20N03Q8
1.05VS 1.05V_LAN_M PJ28 1
D01A_1016_Alex
NMOS
7A
SYS15V
8 7
PQ67A MTNN20N03Q8 2 1
VDD3
PR188 10K_04
PQ53
G S
4
C B
PC115
3.3V 2,14,19,29,30,32,36,37,39,41 5V 13,28,29,32,38,39,41 1.05VM 25,26 1.05VS 3,6,25,26,30,44 1.05V_LAN_M 25,26 A VDD3 13,19,20,21,23,24,25,26,27,29,34,36,37,40,41 VIN 13,14,39,40,41,44,45 VDD5 28,40,41 SYS15V 35,40,41
MTN7002ZHS3 1u_6.3V_X5R_04
PQ68 D02_1112_Alex
100K_04
5
SUSB
2N3904
13,18,39,41
6
2200p_50V_X7R_04
1.05VS_PW RGD 21
G PR190
PQ67B MTNN20N03Q8
D01a_1011_Alex
A
ON
PQ52
MTN7002ZHS3 1.05VS
1.05VS_VTT_EN2 PC196
PR189 10K_04
D02_1115_Alex
3
1M_04
VDD3
PR191 47_04
7A
Power Plane
PR187
D01a_1011_Alex
1.05VS
OPEN_2A 2
D
41
S
SLP_A
6
D01a_1011_Alex
E
5
470p_50V_X7R_04
D
4
1.05VS_VTT_EN1 PC184
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size A3 Date: 5
4
3
2
[42] POWER 1.05VS Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
42
of
66
1
Power 1.05VS B - 43
B.Schematic Diagrams
VCC
PC142 PQ81
3 PC86
12A
12 11
2.2_04
3.3V
PC194
D
PU9
PR100
PC183
0.1u_50V_Y5V_06
*OPEN-1mm 2 1.05V_LAN_M_EN
560u_2.5V_6.6*6.6*5.9
21,41 PM_SLP_LAN#
PJ24 1
VTT_SELECT VTT VR Output Voltages1 21,28,30,32,33,34,41 SUSB# low 1.1 V high (V1.1S_VTT) 1.05 V
VIN
PR99 820K_1%_06
*4.7u_25V_X5R_08
Short
D
PC183,PC194լՂٙ 3/6 Stanley
*CV-40mil 2
*4.7u_25V_X5R_08
PJ22 Z3501 1
*5.1_06
100K_04
PR156
PR56
5V
Schematic Diagrams
LED 5V 5
4
3
2
1
B.Schematic Diagrams
D
Sheet 43 of 66 LED 5V
D
C
C
D04_Reflash_0905_Alex
N/A
B
B
13,28,29,32,38,39,41,42 13,14,39,40,41,42,44,45
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
A
Title Size A4 Date: 5
B - 44 LED 5V
5V VIN
4
3
2
A
[43] P375SM LED 5V Document Number SCHEMATIC1
Rev 0.1
6-71-P15S0-DA3A
Thursday, March 06, 2014
Sheet
43 1
of
66
Schematic Diagrams
Power V-Core 1 5
4
3.3VS
PR163
3
2
1
*20mil_04 0513 POWER
1 PJ25 *CV-40mil
2 VR_EN
SWN1 CSP3
PR344
CSREF
PC149
S
0.1u_50V_X7R_06
*4.7u_25V_X5R_08
15u_25V_6.3*4.4
D
D S
C
D
D
D
Sheet 44 of 66 Power V-Core 1
PD28
S
S
G
PR157 2.2_06
A FM5822
PR102
G
CSREF
CSREF
D02_1119_EMI 10_04 *15mil_06
PR103
SWN1
VCORE Gary 10/17(ଥإBOMፖᒵሁՂٙԫી)
SWN1
VIN VIN
HG3
PC101,PC103 լՂٙ 3/6 Stanley
PC152 PC156 PC201 +
PR38 SW3
LG3
PQ91 MDU1516 ULTRASO-8
G
PQ92 MDU1516 ULTRASO-8
PC101
PC103
PC102
+
G
P150SM-A_D01_Alex
PC199
0.1u_50V_X7R_06
+
*4.7u_25V_X5R_08
+
*4.7u_25V_X5R_08
APGNDAPGND
+
D02_1112_Alex PL21 1 2
0_04 SW3
LG3 PQ39 MDU1512 ULTRASO-8
PQ43 MDU1512 ULTRASO-8
PQ44 MDU1512 ULTRASO-8
PR104 PR158 2.2_06
G
CSREF
D02_1119_EMI
CSREF
S
FM5822
A
S
S
G
VCORE
0.36UH_12.9*14*3.8 PC145 2200p_50V_X7R_04 PD29
G 0513 POWER
B
C
PR361 34.8K_1%_04
+
D
+
15u_25V_6.3*4.4
PC153 PC200 PC154 PC155
D
+
S
450K
PC143 0.36UH_12.9*14*3.8 2200p_50V_X7R_04 D02_1112_Alex
1000p_50V_X7R_04
34.8K
VCORE
1000p_50V_X7R_04
325K
PQ34 MDU1512 ULTRASO-8
2
C794
FSW(Hz)
49.9K
PQ33 MDU1512 ULTRASO-8
G PR359 45.3K_1%_04
C
PL11
1
LG1 PQ35 MDU1512 ULTRASO-8
LG1 PC318 0.22u_10V_X5R_04
330uF_25V
C789
PR355(ohm)
HG1 2_06
PC340 +
0_04 SW1
5VS SW1
LG1
PR340
PC315 0.1u_10V_X7R_04
APGND
B
PR39
PC100
0_04
PR126 54.9_1%_04
H_CPU_SVIDDAT H_CPU_SVIDALRT# H_CPU_SVIDCLK
6 H_CPU_SVIDDAT 6 H_CPU_SVIDALRT# 6 H_CPU_SVIDCLK
HG1
2.2u_6.3V_X5R_04
D
VR_EN PR353 PR129 *75_1%_04
PC316
SW1
APGND
PC320 2.2u_6.3V_X5R_04
SW3 LG3
S
GND
2_06
HG3
D
PR382
18 17 16 15 14 13 12 11 10
330uF_2.5V_6.6*6.6*4.2
5VS
37
HG3 SW 3 LG3 PVCC PGND LG1 SW 1 HG1 BST1
PC89
+
G
2_06
330uF_2.5V_6.6*6.6*4.2
0_04
PC317 3900p_50V_X7R_04 PC311 1000p_50V_X7R_04
VCCIO_OUT
PR362 130_1%_04
CSSUM
27 26 25 24 23 22 21 20 19
1K_04
0_04
ILIM IOUT VRMP COMP FB DIFFOUT VSN VSP VCC
PQ89 MDU1516 ULTRASO-8
G PC319 0.22u_10V_X5R_04 PR339
330uF_2.5V_6.6*6.6*4.2
PR349
28 29 30 31 32 33 34 35 36
0.1u_10V_X7R_04 PC314
APGND
6,7 VCORE_VCC_SENSE
28.7K_1%_04 PR354
330uF_2.5V_6.6*6.6*4.2
PR351
PU4 NCP81103MNTXG
330uF_2.5V_6.6*6.6*4.2
0_04 APGND
PR348
PUT COLSE TO VCORE HOT SPOT
PQ90 MDU1516 ULTRASO-8
330uF_2.5V_6.6*6.6*4.2
PR352
6.8K_1%_04
7 VCORE_VSS_SENSE
ASM for 2 phase
PC197
CSCOMP CSSUM CSREF CSP3 CSP2 CSP1 DRON PWM2/IMAX BST3
PR357
ASM for 1 phase
PR363 15.4K_1%_04
EN VRHOT# SDIO ALERT# SCLK VR_RDY ROSC TSENSE VBOOT
1K_04
CSP2
0.047u_10V_X7R_04
PR106
10_04 *15mil_06 SWN3
D04_Reflash_0924_Alex
A
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
5VS 14,32,33 1.05VS 3,6,25,26,30,42 VIN 13,14,39,40,41,42,45 VCCIO_OUT 3,5,6 VCORE 6,7,8 3.3VS 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,32,33,34,35,36,37,41,46,61
Title
Date:
5
4
3
[43] POWER V-CORE1
Size Document Number Custom SCHEMATIC1
2
Rev 1.0
6-71-P15S0-DA3A Sheet
Thursday, March 06, 2014
44
of
66
1
Power V-Core 1 B - 45
B.Schematic Diagrams
10p_50V_NPO_04
APGND APGND
PC322 470p_50V_X7R_04 PR347
D01A_1025_Alex
PC150
PC148
C
CSP3
SWN1
D
VIN
0.01u_50V_X7R_04
PR350 49.9_1%_04
6.98K_1%_04
0513 POWER RT2
PC89 լՂٙ 3/6 Stanley
DELAY_PWRGD
21 DELAY_PWRGD
PR345
2K_1%_04
PR358 54.9K_1%_04
CSCOMP
PR355 1K_04
1 2 H_PROCHOT# H_CPU_SVIDDAT 3 H_CPU_SVIDALRT# 4 H_CPU_SVIDCLK 5 6 DELAY_PWRGD 7 8 TSENSE 9
PC157 D02_1116_Alex
CSP3 CSP2 CSP1
PR127
*2K_1%_04
0513 POWER
*0.1u_50V_Y5V_06
H_PROCHOT#
3 H_PROCHOT#
470p_50V_X7R_04
VIN
PR356 10K_04
PR131
32.4K_1%_04
PR365 *20K_04
CSP1
PR125 *75_1%_04
5VS
SWN3
TH05-4F104FR
CSREF
6.98K_1%_04
CSREF PC312
*CV-40mil 1.05VS 3.3VS
5VS
PR346 0.047u_10V_X7R_04
S
2
PR364 *20K_04
D
1
CSREF
SWN3
PR360 PR385 PR309 165K_1%_04 162K_1%_06 D02 12/03 Value᧢ ᧢ ޓGary APGND D02_1109_Alex 75K_1%_04 PC304 1200p_50V_X7R_04 PC310 1000p_50V_X7R_04
PJ30 14,21,34 ALL_SYS_PWRGD
PR384 162K_1%_06
330uF_2.5V_6.6*6.6*4.2
D01A_1025_Alex
D
TSENSE TH05-4F104FR 1
PC313
PUT COLSE TO VCORE Phase 1 Inductor
2
0513 POWER RT1 2
APGND
100K_04
1
PR128
Schematic Diagrams
AC_In, Charger 2
PQ37 ME4425 5 6 7 8
V_BAT
3
PR18 100K_04 G
IACP
2
AC AV
9
17
4.7u_25V_X5R_08
0.1u_50V_Y5V_06 PC271
10_06
10_06 PR323
4.7u_25V_X5R_08
V_BAT D04_Reflash_0924_Alex PR387 330_04 SMC_BAT_R SMD_BAT_R
PR388 330_04
7
IAC1
8
COMP_CHARGER
34
PR330 0_04
PR332 *15mil_short_06
BAT_DET
BAT_DET
PR328
0_04
PR329
0_04
PR331
10_04
6
SMC_BAT 30,34 SMD_BAT 30,34 TOTAL_CUR 34 A
PC278 PC279 PR334 100_04
PC281 1u_10V_Y5V_06
PC282 1u_10V_Y5V_06
PD30
PD31
AC/BATL# 13 D MTN7002ZHS3 PQ17
PU5 G *TL331
PR41 *330K_04
PQ41 MTP3403N3 S D
V_BAT
PR336 300K_1%_04
PR335
60.4K_1%_04
PC286
PD4 *RB0540S2
0.1u_16V_Y5V_04
PD2 VA
C
A
PQ51 DTC114EUA B
AC_IN#
34
ZD5245BS2 E
D
A
100K_04
C
PR338
G
PR337
47K_04
BAT_VOLT 34
VDD3
BTJ-07AP0G-SD001
C
P170SM,P157SM,P177SM BTJ-07DT0B_100803 6-21-D3G00-107
Battery Voltage: 12V~16.8V
10K_04 VDD3
PC285
P150SM, P151SM BTJ-07AP0G-SD001 6-21-D3420-107
S
*7.5K_04
4
PC284
7 6 5 4 3 2 1
C
2
PR29
5
PR161
+
1
A
A
VA1 IAC1
3
J_BATTA1
PC283
D04_Reflash_0924_Alex VDD3
*15K_04
PD6
Gary D03 ᄅᏺ
*0.1u_10V_X5R_04
PR28
PD9
30p_50V_NPO_04
*2M_04
PD5
PC280 24K_1%_04
C
1u_25V_Y5V_08
PC277 *1u_25V_Y5V_08
34 PMOSFET_CONTROL#
PC276
1000P_50V_X7R_04
PC275
100K_04
0_04
VDDA
ICHM
11 10
30p_50V_NPO_04
PR31
COMP
ACAV
4
30p_50V_NPO_04
PC287
PR34
*1u_25V_Y5V_08
D PQ46 MTN7002ZHS3
S
34 LOT6_CHG
PR333
G
IAC
IACP
PU10
100K_1%_04
C
IACM
S
PR342
SCL
C
PQ85 MTN7002ZHS3
300K_1%_04
SDA
VDDP
*MMSZ5232BS
G
D
PR386
VAC
C
BSTOZ8681-E ICHM
1 15
IACM
ICHP
RB0540S2
12
VDDP
5
C
A
D02A modify PD22 MDL914S2
ICHP
C
C
33_06
HDR
LDR
A
BST_ VAC
MDL914S2
LX
RB0540S2 A
16
13
RB0540S2
C
LDR
PR327
Sheet 45 of 66 AC_In, Charger
D
*MMSZ5232BS
A
*0_06
PQ45 MTP3403N3 S D
4.7u_25V_X5R_08 PC263
PC262
0.047u_10V_X7R_04 LX_CHG 14
PD21
VA
PC273
D02A modify PR320 0.02 -> 0.01 bug 61 D02A modify PC267~PC270 stuff bug 61
PC274 0.1u_50V_Y5V_06
Gary D03 ᄅᏺ
PR147
4.7u_25V_X5R_08 PC266
3 4
0.047u_10V_X7R_04
PR320 0.01_1%_32
4.7u_25V_X5R_08 PC265
5 6 8
10_06
PL14 TMPB0603M-8R2MN-Z01
0.47u_6.3V_X5R_04
PR326 15K_04
PQ36B AP6901GSM
BASE
Gary D03 DELᒵ
+
PC272
5.6u_25V_B_A
PR321 100K_04
ᔾ २ JBATTA1
DEL PC260,PC261ADD 5.6u_25V_B2 cap for noise 2/28 Stanley PQ36A AP6901GSM 2 1 7
PC185
12/06 Value᧢ ޓGary
2MJ-3432-008H
D02A modify VDD3
G S
B.Schematic Diagrams
PR319 470K_04 Gary D03 value᧢ޓ
1 2 3 4
PR318 0.01_1%_32 PR343 0.01_1%_32
PR325
JAC1
10_06
0.1u_50V_Y5V_06
2DC-G213-B49
P170 P177
3 2 1
4.7u_25V_X5R_08
PC258
VA1
PQ7 ME4425 8 7 6 5
PR322
GND1 GND2
4
1 2 GND GND
PC264
VA PL13 HCB2012KF-800T80 PC259
J_DC-JACK1
P150 P151 P157
0.1u_50V_Y5V_06
D
PC270
1 2 3
10u_25V_X5R_08
*470K_04
4.7u_25V_X5R_08
0_04
PR317
PC269
PR316
PC268
VA
VIN
D02A modify PQ37, PQ38 value
PR324
1000P_50V_X7R_04
4
PQ38 ME4425
4
PC291
1
8 7 6 5
3 2 1
4
3 2 1
PC290
0.1u_50V_Y5V_06
PQ49 ME4425 8 7 6 5
3
D02A modify PQ7, PQ49, PQ72 value
VA1
3 2 1 4
PC288
1000P_50V_X7R_04
PL12 HCB2012KF-800T80
PC289
0.1u_50V_Y5V_06
P150SM-A_D01_Alex
8 7 6 5
10u_25V_X5R_08
4
PQ72 ME4425
VA
PC267
5
B
PQ42 MTN7002ZHS3
Gary D03 ᄅᏺሿٙ
AC_IN B
DEL SMBUS FAIL,RESET SCH Stanley
PCB Layout notes
1) All power traces should be routed on the outer layers GNDP, VAD, VSYS, LX, VCHG, VBATT 2) Use Kelvin connections for R3, R4 (seperate force and measurement traces) A
3) R23 and R24 are dummy resistors, for layout purposes only (serves as single point connection between GNDP & GNDA)
A
4) Footprint TO-236 is equivalent to SOT-23 5) Footprint SIP/1P is a single hole axial pad 6) All resisitors, capacitors and semiconductors are SMD
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
7) Potentiometers, and test points are axial devices Title 41 VA 13,19,20,21,23,24,25,26,27,29,34,36,37,40,41,42,46 VDD3 13,14,39,40,41,42,44 VIN
Size A2 Date:
5
B - 46 AC_In, Charger
4
3
2
[45] AC_IN, CHARGE Document Number SCHEMATIC1
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014 1
Sheet
45
of
66
Schematic Diagrams
TPM 5
4
3
2
1
SLB9635TT & SLB9655TT Co-Layout 12/06 DVTլՂٙ Gary SLB9635,SLB9655 Ղٙ
3.3VS 12/06 DVTլՂٙ Gary
U13 D
20,30,34 20,30,34 20,30,34 20,30,34
LPC_AD0 LPC_AD1 LPC_AD2 LPC_AD3
27 PCLK_TPM
21 PM_CLKRUN#
21 SUS_STAT#
R296
26 23 20 17
PCLK_TPM
21
LPC_FRAME# PLT_RST#
22 16 27 15 28
*0_04 TPM_BADD
3.3VS
R188 SLB9655 լՂٙ
9 7
*10K_04 TPM_PP
1 3 12
C
R322
*0_04 8
SLB9655 լՂٙ
LAD0 LAD1 LAD2 LAD3 LCLK
VDD1 VDD2 VDD3
10 R315 19 24
LPCPD#
VSB
C181
C171
*0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04
TESTBI/BADD XTALI
C213
*0.1u_16V_Y5V_04
*1u_6.3V_X5R_04
VDD3 R108
*0_04
D02_1112_Alex GPIO GPIO2
C205
5 SLB9635 Ղٙ
C186
6 2
*0.1u_16V_Y5V_04
13
Sheet 46 of 66 TPM
12/06 DVTլՂٙ Gary
PP XTALO NC_1 NC_2 NC_3 TESTI
GND_1 GND_2 GND_3 GND_4
14
D02A DEL X2,C187,C185,R317,R318
4 11 18 25
C
Gary 10/17(Fix X'talլՂٙby ٥شᒵሁ)
*SLB9655TT 12/06 DVTլՂٙ Gary
SLB9655 Ղٙ
Asserted before entering S3 PLT_RST#
LPC reset timing: LPCPD# inactive to LRST# inactive 32~96us
TPM_PP
HI: ACCESS LOW: NORMAL ( Internal PD )
TPM_BADD
HI: 4E/ 4F H LOW: 2E/ 2F H
B
D
SLB9655 R107 Ղٙ *0_04 12/06 DVTլՂٙ Gary
TPM
LFRAME# LRESET# SERIRQ CLKRUN#
*0_04
R325
12/06 DVTլՂٙ Gary TPM_BADD *0_04
PCLK_TPM
R187
*33_04
TPM_PP
R158
*10K_04
TPM_BADD
R156
*10K_04 12/06 DVTլՂٙ Gary *10K_04
C217
*10p_50V_04
3.3VS
R157
B
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
A
13,19,20,21,23,24,25,26,27,29,34,36,37,40,41,42,45 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,32,33,34,35,36,37,41,44,61 5
4
3
VDD3 3.3VS
Title
[46] TPM 2.0
Size
Document Number SCHEMATIC1
A4 Date: 2
Rev 1.0
6-71-P15S0-DA3A
Thursday, March 06, 2014
46
Sheet
A
of
66
1
TPM B - 47
B.Schematic Diagrams
SLB9655 լՂٙ 20,30,34 LPC_FRAME# 3,13,22 PLT_RST# 20,30,34 SERIRQ PM_CLKRUN# R324 *0_04
LPC_AD0 LPC_AD1 LPC_AD2 LPC_AD3
Schematic Diagrams
Audio Board 5
4
3
2
1
USB PORT A_USBVCC A_USBVCC AL9 HCB1608KF-121T25
D
*0_04
+
AC17
AC15
AC14
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
10u_10V_Y5V_08
AC2
AC11
D
100u_6.3V_B_A
0.1u_16V_Y5V_04 AJ_USB1
1
V+
AGND
AUSB_PN0_R
2
AUSB_PP0_R
3
DATA_L DATA_H
4 AUSB_PN0
4 AL7
AUSB_PP0
1 2 *W CM2012F2S-161T03-short
Sheet 47 of 66 Audio Board
GND
3
US04036BCA081
GND2
B.Schematic Diagrams
AGND
GND1
ᄅᏺՠ࿓ISSUE
GND2
2AR
A_USBVCC2
60 mil
50 mil
*0_04
GND1
1AR
AGND AGND ALINE_SENSE
AUDIO JACK
C
AJ_LINE1
5 4 3 6 2 1
AL6 FCM1005KF-121T03
ALINE-R AL5
A_USBVCC
FCM1005KF-121T03
ALINE-L AJ_AUDIO1
1 3 5 7 9 11 13 15 17 19 21
AMIC1-R AMIC1-L AHEADPHONE-R AHEADPHONE-L HP_PLUG A_5VS
2 4 6 8 10 12 14 16 18 20 22
2SJ-T351-018
AJD_SENSEA ALINE-R ALINE-L AJD_SENSEB ASIDE_R ASIDE_L ASPDIFO
AC9 100p_50V_NPO_04
AC10 A_AUDG 100p_50V_NPO_04
AJ_SPDIF1 ASIDE_L ASIDE_R
AL8 AL11
1 2 3 4 5
HCB1608KF-121T25 HCB1608KF-121T25
AUSB_PP0 AUSB_PN0
ASIDE_SENSE AC16
50251-022 ASPDIFO A_AUDG AGND
C
AL10
AC18
A_AUDG
A_AUDG
A_5VS
A B C
680p_50V_X7R_04 A_AUDG 680p_50V_X7R_04 HCB1608KF-121T25
AGND
DRIVE IC
TX TOJ-0015STR2-2-H4-PA9T-J
AC7
AHP_AUDG AMIC_SENSE
0.1u_16V_Y5V_04 AR11 *220_04 AGND
close to Codec
B
AJD_SENSEA AJD_SENSEB
AR10 AR9 AR7 AR8
10K_1%_04 20K_1%_04 39.2K_1%_04 5.1K_1%_04
AJ_MIC1
AC19 180p_50V_NPO_04
AGND
A_AUDG
AMIC1-R
AL4
HCB1608KF-121T25
AMIC1-L
AL1
HCB1608KF-121T25
5 4 3 6 2 1
AGND
ALINE_SENSE AMIC_SENSE AHP_SENSE ASIDE_SENSE
AC6 100p_50V_NPO_04
MIC IN B 2SJ-T351-018
AC3 100p_50V_NPO_04
A_AUDG
A_AUDG
A_AUDG
D04_Reflash_0925_Alex AHP_SENSE AH2 H8_0D2_8
AH1 H8_0D2_8 AR5
54.9_1%_04
AHEADPHONE-L
AR4
54.9_1%_04
AL3
FCM1005KF-121T03
AL2
FCM1005KF-121T03 AC5
AR3
AR6
22K_04
22K_04
100p_50V_NPO_04 A_AUDG
A_AUDG
AJ_HP1
5 4 3 6 2 1
HP_PLUG AHEADPHONE-R
2SJ-T351-018
AC4 100p_50V_NPO_04
AR2 *1K_04
AR1 *1K_04
AGND
AR12 AC1
0.1u_16V_Y5V_04
AR13 A_AUDG
A
AC13
0.1u_16V_Y5V_04
AC12
0.1u_16V_Y5V_04
AC8
0.1u_16V_Y5V_04
A_AUDG
AVLC5S02100
0_04
A_AUDG
A_AUDG
A_AUDG A_AUDG
A_AUDG AHP_AUDG
AGND
AR12
AR13
SV3H612
լՂٙ
Ղٙ
SV3H615
Ղٙ
լՂٙ
A_AUDG
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size A3 Date:
5
B - 48 Audio Board
4
3
2
[47] AUDIO BOARD Document Number SCHEMATIC1
Rev 1.0
6-71-P15S8-DA1
Thursday, March 06, 2014
Sheet 1
47
of
66
A
Schematic Diagrams
P150 ODD Board 5
4
3
2
O_5VS
EODD_EDTECT# EODD_DA# D
OC4 OC5
0.01u_16V_X7R_04 0.01u_16V_X7R_04
OSATA_TXP0 OSATA_TXN0
OC6 OC7
0.01u_16V_X7R_04 0.01u_16V_X7R_04
OSATA_RXN0 OSATA_RXP0
2 4 6 8 10 12 14 16 18 20
OJ_SATA_HODD1 1 1 3 3 5 5 7 7 9 9 11 11 13 13 15 15 17 17 19 19
OSATA_TXP0 OSATA_TXN0 OSATA_RXN0 OSATA_RXP0
D
C1952 OGND
OGND
Sheet 48 of 66 P150 ODD Board
OGND P1 P2 P3 P4 P5 P6
C
EODD_EDTECT# O_5VS
O_5VS EODD_DA#
C
OC3
FP->AT13035BAA089 C990326
205502-2
OC1
0.1u_16V_Y5V_04
*10u_10V_08
OGND
OC2 0.01u_16V_X7R_04
P150 ONLY
OGND
B
B
OH1 OH2 OH3 OH4 OH5 H8_0D2_8 H8_0D2_8 H6_5D2_5 H3_5D1_8 H3_5D1_8
1OR
*0_04
2OR
*0_04
3OR
*0_04
ᄅᏺՠ࿓ISSUE
OGND
OGND
OGND
OGND
OGND
A
Title Size A4 Date: 5
4
3
2
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
[48] P150 ODD BOARD Document Number
Rev
6-71-P15SN-D01
Thursday, March 06, 2014
Sheet
48
1.0 of
66
1
P150 ODD Board B - 49
B.Schematic Diagrams
OJ_ODD1 S1 S2 S3 S4 S5 S6 S7
ֆஆ 2 4 6 8 10 12 14 16 18 20
1
Schematic Diagrams
P150 Click Board 5
4
3
2
1
CSW1~2 T3.3V
T+5VS
2 1 TC17 0.1u_16V_Y5V_04
T+5VS
.
RIGHT KEY
TJ_TPB1
D
1 2 3 4 5 6
TC1 TR24 TR25
27_1%_04 27_1%_04
TUSB_PN10 TUSB_PP10
0.1u_16V_Y5V_04
TSW 1 T4BJB16-Q
TGND
TJ_TP1
TGTP_CLK TGTP_DATA
TSW 2 T4BJB16-Q
1 3
2 4
TGTP_CLK TGTP_DATA TTPBUTTON_L TTPBUTTON_R
1 3
TTPBUTTON_R
5 6
10 9 8 7 6 5 4 3 2 1
LIFT KEY
2 4
TTPBUTTON_L
5 6
TL1 FCM1005KF-121T03
4 3
D
85201-06051
85201-10051
TGND TGND
TGND
TGND
It is strongly recommended that the TESD_GND has a dedicated connection to the system chassis or cable shield.
TGND
TGND
LAYOUTຝٝᓮᒔᎁઌᣂ֮ٙ&ᐗᒔᎁ T3.3V TU1
Sheet 49 of 66 P150 Click Board
5
TC18
TUSB_PN10 4
0.1u_10V_X7R_04
VP
NC
NC
VN
ᆃַࠌش᠏ֱࣨڤPCB Layout
1 2 3
CH2 CH1
TUSB_PP10 TJ_FPB1
CM1293A-02SO
TDISCON
TGND TGND
FOR ESD, ᔾ२FFC CONNECTORឭ࣋
C
TR16 TR18
10K_04 10K_04
TGND T_RST_N T3.3V
T_XIN TR15
1M_04
1 3 5 7 9 11 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
T2.5V
C
T_XOUT T_XIN T3.3V
S
6
TUSB_PN10 TUSB_PP10
*CON24A QPOFZ-24R2-XD-Z-LD
T_XOUT
D
B.Schematic Diagrams
6-20-94A20-110
TR8
TGND
3
4
2
1
1.5K_04
TGND TGND
TX1 HSX321G_12Mhz
TC19
G TDISCON TQ1 AO3415
15p_50V_NPO_04
TGND
TC26 15p_50V_NPO_04
TGND
TGND T3.3V
B
TR19
47K_04
T_RST_N B
TC23 T2.5V
T3.3V
1u_6.3V_X5R_04 NOTE: CLK_SEL CLK_SEL=HIGH (NC) , FREQ=12MHz Crystal CLK_SEL=LOW , FREQ=48MHz OSC
TGND TC20
TC21
TC22
TC24
0.1u_10V_X7R_04
4.7u_6.3V_X5R_06
0.1u_10V_X7R_04
4.7u_6.3V_X5R_06
TGND
TGND
CLOSE TO SENSOR POWER PIN
ᄅᏺՠ࿓ISSUE 1TR
*0_04
4TR
*0_04
2TR
*0_04
5TR
*0_04
3TR
*0_04
6TR
*0_04
A
A
TH2 H6_0D2_2
TH1 H6_0D2_2
W/O finger printer P/N: 6-71-P15E2-???
D04_Reflash_0910_Alex
P150 ONLY TGND
TGND
Title
Date: 5
B - 50 P150 Click Board
4
3
2
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ [49] P150 CLICK BOARD
Size A3
Document Number SCHEMATIC1
Rev 1.0
6-71-P15S2-D05
Thursday, March 06, 2014
Sheet 1
49
of
66
Schematic Diagrams
Power LED Board 5
4
3
2
1
P150SM/P170SM ٥ش
D
D
LLED_ACIN
LLED_PWR
LR3
LJ_LED1
LR4
LLED_BAT_FULL
LR2
LR1
LED_GND
3
1
3
1
SG
RY-SP155UHYUYG4
4
Y 2
SG
Sheet 50 of 66 Power LED Board
LD3
RY-SP155UHYUYG4
4
Y 2
SG
LD1
RY-SP155UHYUYG4
4
Y 2
SG
LD4
RY-SP155UHYUYG4
4
Y 2
220_04 Gary D03 Update(ຑ൷exchange)
3
3
1
LD2
85204-05001
220_04
C
C
LED_GND
LED_GND
LED_GND
LED_GND LED_GND
AC IN/POWER ON LED LH1 H6_0B8_0D2_3
For P157SM
LED_GND
LED_GND
BAT CHARGE/FULL LED
LED_GND
For P157SM
BOMངॽ৫,PCB٥شP150EM D02_1031_Alex D02_1031_Alex
D02_1109_Alex ᄅᏺՠ࿓ISSUE LED_GND
B
LD1,LD2
1LR
*0_04
4LR
*0_04
2LR
*0_04
5LR
*0_04
3LR
*0_04
6LR
*0_04
LD3,LD4
P150SM P151SM1 P157SM P170SM P177SM
B
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
A
A
Title
[50] POWER LED BOARD
Size A4 Date: 5
4
3
2
Document Number SCHEMATIC1
Rev 1.0
6-71-P15S4-D03
Thursday, March 06, 2014
Sheet
50
of
66
1
Power LED Board B - 51
B.Schematic Diagrams
220_04 Gary D03 Update(ຑ൷exchange)
LLED_ACIN LLED_PWR LLED_BAT_CHG LLED_BAT_FULL
1
220_04
1 2 3 4 5
LLED_BAT_CHG
Schematic Diagrams
Function LED Board 5
4
3
2
1
L2_3.3VS
L2J_LED1
D
6 5 4 3 2 1 85201-06051
L2SATA_LED# L2WLAN_AIRPLANE#
ADD LED for AIRPLANE LED/dGPU
L2dGPU_PWR_EN#
D
LED
L2GND
L2_3.3VS
L2R2
L2_3.3VS
220_04
A
L2R3
HDD/CD-ROM LED
220_04
C
C
L2D2
A L2D1
L2R1
RY-SP172DNB74-5A
220_1%_04
C
RY-SP172DNB74-5A
A
Sheet 51 of 66 Function LED Board
C
L2D3 RY-SP172DNB74-5A Gary D03 ᧢شޓற L2SATA_LED#
B
C
B.Schematic Diagrams
L2_3.3VS
L2WLAN_AIRPLANE# B
L2dGPU_PWR_EN# D01A_1018_Alex
ᄅᏺՠ࿓ISSUE L2H1 L2H2 H6_0D2_3 H6_0D2_3
1L2R
*0_04
2L2R
*0_04
3L2R
*0_04
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
A
L2GND
L2GND Title Size A Date: 5
B - 52 Function LED Board
4
3
A
[51] FUNCTION LED BOARD Document Number SCHEMATIC1
Thursday, March 06, 2014 2
Rev 1.0
6-71-P15S7-D02 Sheet
of
51 1
66
Schematic Diagrams
Indicatory LED Board 5
4
3
2
1
L3_3.3VS L3_3.3VS
L3LED_NUM# L3LED_CAP# L3LED_SCROLL#
L3_3.3VS
L3_3.3VS
D02A_1219_Alex
D02A_1219_Alex
L3R3 220_1%_04
220_1%_04
SCROLL LOCK LED
L3D2
RY-SP172DNB74-5A
L3LED_SCROLL#
NUM LOCK LED
L3D1
RY-SP172DNB74-5A
C
RY-SP172DNB74-5A
C
220_1%_04
CAPS LOCK LED
L3LED_CAP#
L3LED_NUM#
C
C
ᄅᏺՠ࿓ISSUE
L3H2 L3H1 H6_0D2_3 H6_0D2_3
L3_GND
Sheet 52 of 66 Indicatory LED Board
1L3R
*0_04
2L3R
*0_04
3L3R
*0_04
L3_GND
B
B
P151SM ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
A
Title Size A Date: 5
4
3
A
[52] INDICATORY LED BOARD Document Number SCHEMATIC1
Thursday, March 06, 2014 2
Rev 1.0
6-71-P15S5-D01 Sheet
of
52
66
1
Indicatory LED Board B - 53
B.Schematic Diagrams
L3D3
L3R1
C
A
85201-06051
D
D02A_1219_Alex
L3R2
A
6 5 4 3 2 1
A
L3J_LED1 D
Schematic Diagrams
P170 2nd HDD Board 5
4
HJ_ODD1 S1 S2 S3 S4 S5 S6 S7
3
2
H_5VS HC16 HC15
0.01u_16V_X7R_04 0.01u_16V_X7R_04
HSATA_TXP0 HSATA_TXN0
HC14 HC13
0.01u_16V_X7R_04 0.01u_16V_X7R_04
HSATA_RXN0 HSATA_RXP0
ֆஆ
2 4 6 8 10 12 14 16 18 20
H_EODD_EDTECT# H_EODD_DA# H_5VS
D
HGND
P1 P2 P3 P4 P5 P6
H_3.3VS
H_EODD_EDTECT# H_5VS
HSATA_TXP0 HSATA_TXN0 HSATA_RXN0 HSATA_RXP0 HSATA_TXP1 HSATA_TXN1
D
HSATA_RXN1 HSATA_RXP1
C1952
H_EODD_DA# HGND
FP->AT13035BAA089 C990326
C185P3-11309-L
HJ_SATA_HODD1 1 1 3 3 5 5 7 7 9 9 11 11 13 13 15 15 17 17 19 19
2 4 6 8 10 12 14 16 18 20
1
HGND H_3.3VS HR1
H_SATA_TXP1 H_SATA_TXN1 H_SATA_RXN1 H_SATA_RXP1 HJ_HDD1 S1 S2 S3 S4 S5 S6 S7
*0.01u_16V_X7R_04 *0.01u_16V_X7R_04 *0.01u_16V_X7R_04 *0.01u_16V_X7R_04
HSATA_RXN1 HSATA_RXP1
HSATA_TXP1_R HSATA_TXN1_R HSATA_RXN1_R HSATA_RXP1_R
HC21 HC23 HC24 HC25
H_SATA_TXP1 HC5 H_SATA_TXN1 HC6
0.01u_16V_X7R_04 0.01u_16V_X7R_04
HSATA_TXP1_EX HSATA_TXN1_EX
H_SATA_RXN1 HC7 H_SATA_RXP1 HC8
0.01u_16V_X7R_04 0.01u_16V_X7R_04
HSATA_RXN1_EX HSATA_RXP1_EX
HC20 HC22
6 10 16 20 HGND
1 2
0.01u_16V_X7R_04 0.01u_16V_X7R_04
4 5
0.01u_16V_X7R_04 0.01u_16V_X7R_04
H_3.3VS
HR9 HR10 HR12
*100K_04 *100K_04 *100K_04
HR14 HR16
*100K_04 *4.7K_04
RX_0P RX_0N
TX_0P TX_0N
HOST
DEVICE
TX_1N TX_1P
RX_1N RX_1P
C
15 14
HSATA_TXP1_EX HSATA_TXN1_EX
12 11
HSATA_RXN1_EX HSATA_RXP1_EX
GND GND EQ1 GND EQ2
co-lay
HC18 HC19
3 13 17 18 19
HSATA_TXP1 HSATA_TXN1
HR3 12/06 Change شற Gary 4.7K_04 HU1 SN75LVCP601 7 EN
DEW2 VDD DEW1 VDD
P170 ONLY
0_04
T-PAD
C
HR2 HSATA_TXP1_R HSATA_TXN1_R HSATA_RXN1_R HSATA_RXP1_R
*0_04 *0_04 *0_04 *0_04
21
Sheet 53 of 66 P170 2nd HDD Board
HR4 HR5 HR6 HR7
*0_04
co-lay HSATA_TXP1 HSATA_TXN1 HSATA_RXN1 HSATA_RXP1
8 9 DE2 HR8 *2K_1%_04 DE1
B.Schematic Diagrams
HGND
H_3.3VS
HR11 HR13
*4.7K_04 *4.7K_04
HR15 HR17
*4.7K_04 0_04
H_3.3VS B
P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15
HC11
10u_10V_Y5V_08
HGND
HGND
HGND
*0.01u_16V_X7R_04 H_5VS HGND
HGND
Closed to H1U1
Layout Note: H_3.3VS
HC9
HC4
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
SC0200-03G7-F0H
PIN GND1~2=GND HGND
HH3 HH2 HH1 H7_0D2_8 H7_0D2_8 H6_0D2_3
HC17
HC12
HC2
0.1u_16V_Y5V_04
1u_6.3V_X5R_04
10u_10V_Y5V_08
+
HC1
HC3
100u_6.3V_B_A ESR35M
*22u_6.3V_12
HC26
HGND
0.1u_16V_Y5V_04
HGND
1u_6.3V_X5R_04 HGND
*0_04
4HR
*0_04
2HR
*0_04
5HR
*0_04
HGND *0_04
6HR
*0_04
Title
3
[53] P170 SECOND HDD BOARD
Size Document Number Custom SCHEMATIC1 Date:
4
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
1HR
3HR
5
HC28
HGND Co-Lay
HGND
HC27
0.01u_16V_X7R_04 HGND
D05 HC12 1u_6.3V_Y5V_04 -> 1u_6.3V_X5R_04
A
B - 54 P170 2nd HDD Board
B
HC10
2
Rev 1.0
6-71-P17SJ-D01B
Thursday, March 06, 2014
Sheet
53 1
of
66
Schematic Diagrams
Power & LED Board 5
4
3
2
1
L4_3.3VS L4_VDD3 L4_3.3VS
L4_WLAN_AIRPLANE# L4_SATA_LED#
L4_3.3VS
L4R5
L4R6
L4R7
220_04
220_04
220_04
L4_LID_SW# L4C2
PT3661G-BB
L4D3
L4D4
L4D5
HT-170BPZ Gary D03 Update(شற᧢)ޓ
HT-170BPZ Gary D03 Update(شற᧢)ޓ
HT-170BPZ Gary D03 Update(شற᧢)ޓ
*100p_50V_NPO_04
C
P170
D
A
2
L4_VDD3
C
0.1u_16V_Y5V_04
OUT
C
VCC
A
L4_C1
A
L4_U2 1
L4_dGPU_PWR_EN# L4_LED_NUM# L4_LED_CAP# L4_LED_SCROLL# L4_M_BTN#
L4_LID_SW#
L4_3.3VS
100K_04
3
D
L4R2
GND
L4J_LED1 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
L4GND L4_LED_SCROLL#
L4_LED_CAP#
L4_LED_NUM#
ᄅᏺՠ࿓ISSUE
L4GND
1L4R
*0_04
2L4R
*0_04
3L4R
*0_04
L4_3.3VS
POWER BUTTON
C
L4_SW1 4 3
HDD/CD-ROM LED
L4R9 1 2
L4_M_BTN#
Sheet 54 of 66 Power & LED Board
L4_3.3VS
220_04 A
SFKQRMP2125T
C
ADD LED for AIRPLANE LED/dGPU
L4_3.3VS
L4D6 HT-170BPZ Gary D03 Update(شற᧢)ޓ
D02A DEL L4Q2
L4R10 220_04
White A
C
L4GND
L4_SATA_LED#
B
20mil
L4D7 HT-170BPZ Gary D03 Update(شற᧢)ޓ
POWER SWITCH LED
L4R14
C
L4_3.3VS
220_04
B
A
L4R8 220_1%_04 Gary 10/18ଥੌૻإሽॴ220_04 20mil 20mil
L4D8 HT-170BPZ Gary D03 ᧢شޓற
L4C1 C
L4_WLAN_AIRPLANE# *0.1u_16V_04
D02A DEL GND, Add Ctrl-pin L4_dGPU_PWR_EN#
A
L4GND L4D9
C
HT-170BPZ Gary D03 Update(شற᧢)ޓ
L4H1 L4H2 L4H3 H6_0D2_3 H6_0D2_3 H6_0D2_3
A
A
L4GND Title
L4GND
L4GND
L4GND
Size B Date:
5
4
3
2
[54] P170 POWER &LED BOARD Document Number
Rev 1.0
6-71-P17SS-D04 Thursday, March 06, 2014
Sheet
54
of
66
1
Power & LED Board B - 55
B.Schematic Diagrams
87151-15051
Schematic Diagrams
P170 Click Board 5
4
C3.3V
3
1
CC17 0.1u_16V_Y5V_04
C+5VS
.
RIGHT KEY
CJ_TPB1
D
1 2 3 4 5 6
CC16 CR24 CR25
27_1%_04 CUSB_PN10 27_1%_04 CUSB_PP10 CR24,CR25 (W/O Fingerլ լՂٙ)
0.1u_16V_Y5V_04
CSW 2 T4BJB16-Q
CGND
CJ_TP1
CGTP_CLK CGTP_DATA
1 3 CGTP_CLK CGTP_DATA CTPBUTTON_L CTPBUTTON_R
CSW 1 T4BJB16-Q
2 4
1 3
CTPBUTTON_R
2 4
5 6
10 9 8 7 6 5 4 3 2 1
LIFT KEY
CTPBUTTON_L
5 6
CL1 FCM1005KF-121T03
2
C+5VS
D
85201-06051
85201-10051
CGND CGND
CGND
CGND
6-20-94A20-110 CGND
CGND
P170 ONLY Sheet 55 of 66 P170 Click Board
C3.3V CU2
J_FP1 23
C3.3V
1
24
2
47K_04
5 2 1 6
CMOSI CMISO CMCS CMCLK
CRSTn
S Q CS# SCK
VDD
WP#
CC18
1 6 TJ_FP1
2 24 BOTTON VIEW
TOP VIEW
CR26
8
3 CC9 *0.1u_16V_Y5V_04
1u_6.3V_X5R_04
4
C
VSS
HOLD#
7
C
*M95128W MN6TP CGND
CGND
CGND
CJ_FPB1
CR27 CR28
CGND
C3.3V
10K_04 10K_04 CMOSI CMCLK CMCS CRSTn C3.3V
951206
2 4 6 8 10 12 14 16 18 20 22 24
C2.5V
CMISO C3.3V CUSB_PN10 CUSB_PP10
S
1 3 5 7 9 11 13 15 17 19 21 23
CDISCON
*CON24A CTESD_GND
D
B.Schematic Diagrams
It is strongly recommended that the TESD_GND has a dedicated connection to the system chassis or cable shield.
CGND CR29
G
ᄅᏺՠ࿓ISSUE
CDISCON
CQ1 AO3415
1CR
*0_04
4CR
*0_04
2CR
*0_04
5CR
*0_04
3CR
*0_04
6CR
*0_04
1.5K_04
Place Botton
B
B
C2.5V
C3.3V
CC19
CC20
CC21
CC22
0.1u_10V_X7R_04
4.7u_6.3V_X5R_06
0.1u_10V_X7R_04
4.7u_6.3V_X5R_06
CGND
CGND
CLOSE TO SENSOR POWER PIN
A
A
CCH1 CCH2 CCH3 CCH4 CCH5 CCH6 H6_0D2_2 H6_0D2_2 H6_0D2_2 H6_0D2_2 H4_0D2_2 H4_0D2_2
Title CGND
CGND
CGND
CGND
CGND
Size A3
CGND
Date: 5
B - 56 P170 Click Board
4
3
2
[55] P170 CLICK BOARD Document Number
Rev 0.1
6-71-P17S2-D04A Thursday, March 06, 2014
Sheet 1
55
of
66
Schematic Diagrams
P150 Fingerprint Board 5
4
3
2
1
P150 ONLY D
D
FPJT2
1 3 5 7 9 11 13 15 17 19 21 23
F_DISCON
F_LED1 F_LED2 F_MOSI F_MCK F_MCS FRST_N F_3.3V
2 4 6 8 10 12 14 16 18 20 22 24
F_2.5V FXOUT FXIN F_MISO
F_USB_PN10 F_USB_PP10
F_GND
F_GND
FU2
1 C
F_3.3V
2
F_2.5V
3
F_3.3V
4
F_LED1
5
F_MOSI
6
F_MCK
7
F_DISCON
8 9
FXOUT F_2.5V F_3.3V FRST_N
10 11 12 13 14 15
B
F_GND
EGND
MODE
AVDD
DP
DVDD
DN
VDDIO
UVDD
LED1
SPI_CS
SPI_MOSI
SPI_MISO
SPI_CLK
LED2
DISCON
DVSS_1
UVSS
AVSS_1
XO
XI
DVDD_1
AVSS
RVDD
AVDD_1
RESETN
CLK_SEL
DVSS
EGND_2
SGND
EGND_1
ES603-LGA30
NOTE: MODE MODE=HIGH (NC) , USB MODE MODE=LOW , SPI MODE
30 29
F_USB_PP10
28
F_USB_PN10
C
27
F_3.3V
26
F_MCS
25
F_MISO
24
F_LED2
Sheet 56 of 66 P150 Fingerprint Board
23 22 21
FXIN
20 19
F_3.3V
18 17
NOTE: CLK_SEL CLK_SEL=HIGH (NC) , FREQ=12MHz Crystal CLK_SEL=LOW , FREQ=48MHz OSC
16
B
F_GND
FJ1 23
23
2 24 BOTTON VIEW
24
1
1
2 TOP VIEW
A
A
Title
[56] P150 FINGER BOARD
Size Document Number Custom
Rev 1.0
6-71-P15SF-D01
Date: 5
4
3
2
Thursday, March 06, 2014
Sheet
56
of
66
1
P150 Fingerprint Board B - 57
B.Schematic Diagrams
SPNZ-24S1-B-017-1-R SPNZ-24S1-X-C-Z 6-21-41700-212
Schematic Diagrams
P170 Fingerprint Board 5
4
3
2
1
FPJT1
P170 ONLY
1 3 5 7 9 11 13 15 17 19 21 23
FDISCON
FLED1 FLED2
D
F_XIN FR3
F3.3V
FMOSI FMCLK FMCS F_RST_N F3.3V
F_XOUT
1M_04
2 4 6 8 10 12 14 16 18 20 22 24
FGND
4
2
6-21-41710-212
1
15p_50V_NPO_04
B.Schematic Diagrams
FGND
FGND
FX1 HSX321G_12Mhz
FC2
D
FUSB_PN1 FUSB_PP1
SPNZ-24S2-VB-017-1-R FGND
3
F2.5V
FMISO
FC11 15p_50V_NPO_04
NOTE: MODE MODE=HIGH (NC) , USB MODE MODE=LOW , SPI MODE
FU1
ᄅᏺՠ࿓ISSUE
1 FGND
FGND F3.3V
Sheet 57 of 66 P170 Fingerprint Board
C
2
F2.5V
3
F3.3V
4
FLED1
5
FMOSI
6
FMCLK
7
FDISCON
8 9
F_XOUT
10
F2.5V
11
F3.3V F_RST_N
12 13 14 15
FGND
EGND
MODE
AVDD
DP
DVDD
DN
VDDIO
UVDD
LED1
SPI_CS
SPI_MOSI
SPI_MISO
SPI_CLK
LED2
DISCON
DVSS_1
UVSS
AVSS_1
XO
XI
DVDD_1
AVSS
RVDD
AVDD_1
RESETN
CLK_SEL
DVSS
EGND_2
SGND
EGND_1
30 29
FUSB_PP1
28
FUSB_PN1
27
1FR
*0_04
2FR
*0_04
F3.3V
26
FMCS
25
FMISO
24
FLED2
C
23 22 21
F_XIN
20 19
F3.3V
18 NOTE: CLK_SEL CLK_SEL=HIGH (NC) , FREQ=12MHz Crystal CLK_SEL=LOW , FREQ=48MHz OSC
17 16
ES603-LGA30
FGND
B
B
F3.3V F2.5V
FU4
F3.3V
6 5
FC10 FUSB_PN1
0.1u_10V_X7R_04 FC3
FC4
FC5
4
VP
NC
NC
VN
CH2 CH1
1 FJ1
2
FGND 0.1u_10V_X7R_04
4.7u_6.3V_X5R_06
0.1u_10V_X7R_04
4.7u_6.3V_X5R_06
23
23
24
1
FUSB_PP1
CM1293A-02SO
FC6
2 24 BOTTON VIEW
1
3
2 TOP VIEW
FOR ESD, ᔾ२ CONNECTORឭ࣋
A
A
FGND FGND
FGND
CLOSE TO SENSOR POWER PIN Title
[57] P170 FINGER BOARD
Size Document Number Custom
Rev 1.0
6-71-P17SF-D03A
Date: 5
B - 58 P170 Fingerprint Board
4
3
2
Thursday, March 06, 2014
Sheet 1
57
of
66
Schematic Diagrams
P150 2nd HDD Board 5
4
3
2
1
DJ_ODD1
S1 S2 S3 S4 S5 S6 S7
DSATA_TXP0 DSATA_TXN0
D
DSATA_RXN0 DSATA_RXP0
D
DGND
DJ_HDD1 S1 S2 S3 S4 S5 S6 S7
C
242003-1 DSATA_TXP0 DSATA_TXN0
DGND
ᄅᏺՠ࿓ISSUE C
DSATA_RXN0 DSATA_RXP0
P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15
B
PIN GND1~3=QGND
1DR
*0_04
2DR
*0_04
3DR
*0_04
Sheet 58 of 66 P150 2nd HDD Board
D_5VS
DC3
DC4
DC5
DC6
DC7
.1u_16V_Y5V_04
.1u_16V_Y5V_04
.1u_16V_Y5V_04
1u_6.3V_X5R_04
*10u_10V_Y5V_08
+
DC8
DC9
*100U_6.3V_B2
*22u_6.3V_12
B
C166CT-12205-L
PIN GND1~2=GND DGND DGND
6-21-C2700-122 DH1 DH2 DH3 H6_0D2_3 H6_0D2_3 H6_0D2_3
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
A
Title DGND
DGND
DGND
Size A Date:
5
4
3
A
[58] P150 2ND HDD BOARD Document Number SCHEMATIC1
Thursday, March 06, 2014 2
Rev 1.0
6-71-P15SJ-D01 Sheet
58
of
66
1
P150 2nd HDD Board B - 59
B.Schematic Diagrams
P1 P2 P3 P4 P5 P6
D_5VS
Schematic Diagrams
Indicatory LED Board 5
4
3
2
1
LBL_3.3VS LBL_3.3VS
LBLJ_LED1
LBL_3.3VS
LBL_R1
LBL_R2
LBL_R3
220_1%_04 Gary 10/18ଥੌૻإሽॴ220_04
220_1%_04 Gary 10/18ଥੌૻإሽॴ220_04
220_1%_04 Gary 10/18ଥੌૻإሽॴ220_04
LBL_D1
SCROLL LOCK LED
LBL_D2
RY-SP172DNB74-5A
CAPS LOCK LED
NUM LOCK LED
A
A
FP215H-006S1AM
LBL_D3
RY-SP172DNB74-5A
RY-SP172DNB74-5A
LBL_LED_SCROLL#
C
Sheet 59 of 66 Indicatory LED Board
C
D02_1119_Alex
C
B.Schematic Diagrams
LBL_3.3VS
D
LBL_LED_NUM# LBL_LED_CAP# LBL_LED_SCROLL#
A
6 5 4 3 2 1
D
LBL_LED_CAP#
LBL_LED_NUM#
C
C
LBL_H1 LBL_H2 H6_0D2_3 H6_0D2_3
ᄅᏺՠ࿓ISSUE
LBLGND
LBLGND
1LBLR
*0_04
2LBLR
*0_04
3LBLR
*0_04
B
B
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
A
Title Size A Date: 5
B - 60 Indicatory LED Board
4
3
A
[59] INDICATORY LED BOARD Document Number SCHEMATIC1
Thursday, March 06, 2014 2
Rev 1.0
6-71-P15S3-D02 Sheet
of
59 1
66
Schematic Diagrams
Function LED Board 5
4
LBR_3.3VS
LBRJ_LED1
6 5 4 3 2 1
D
3
2
1
LED
LBR_SATA_LED# LBR_WLAN_AIRPLANE#
ADD LED for AIRPLANE LED/dGPU
D
LBR_3.3VS
LBR_dGPU_PWR_EN#
FP215H-006S1AM LBRGND
LBR_3.3VS
D02_1119_Alex
LBR_B3
220_04
HDD/CD-ROM LED
LBR_R1
Gary 10/18ଥੌૻإሽॴ220_04
A
C
A
220_1%_04
C
LBR_D3 LBR_D1
Sheet 60 of 66 Function LED Board
LBR_R2
RY-SP172DNB74-5A
RY-SP172DNB74-5A
C
220_1%_04
A
C
Gary 10/18ଥੌૻإሽॴ220_04
LBR_WLAN_AIRPLANE#
LBR_D2 RY-SP172DNB74-5A Gary D03 ᧢شޓற
C
LBR_SATA_LED#
B
B
LBR_dGPU_PWR_EN# D01A_1018_Alex
ᄅᏺՠ࿓ISSUE
LBRH1 LBRH2 H6_0D2_3 H6_0D2_3
1LBRR
*0_04
2LBRR
*0_04
3LBRR
*0_04
EC ؘႊᄅᏺPin2: BT_LED# ࠎWindows 8 ࠌش. (pull hi 10K to 3.3V)
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/
A
Title
LBRGND
Size A
LBRGND
Date: 5
4
3
A
[60] FUNCTION LED BOARD Document Number SCHEMATIC1
Thursday, March 06, 2014 2
Rev 1.0
6-71-P15SK-D04 Sheet
of
60
66
1
Function LED Board B - 61
B.Schematic Diagrams
LBR_3.3VS
Schematic Diagrams
Mini-DP 5
4
3
2
1
D
D
D04_Reflash_0925_Alex 5VS
S
3.3VS
G
D 0.2R 5% SMD0603
DPSNK0_3_P_R DPSNK0_3_N_R
C946 C947
0.1u_10V_X7R_04 0.1u_10V_X7R_04
DPSNK0_2_P_R DPSNK0_2_N_R
C948 C949
0.1u_10V_X7R_04 0.1u_10V_X7R_04
DPSNK0_1_P_R DPSNK0_1_N_R
C951 C950
0.1u_10V_X7R_04 0.1u_10V_X7R_04
DPSNK0_0_P_R DPSNK0_0_N_R
C953 C952
0.1u_10V_X7R_04 0.1u_10V_X7R_04
C846 C849
0_04 0_04
DP_TDB3 5 DP_TDB#3 5 DP_TDB2 5 DP_TDB#2 5 DP_TDB1 5 DP_TDB#1 5 DP_TDB0 5 DP_TDB#0 5
R356 DPSNK_AUX_P_R DPSNK_AUX_N_R 0.2R 5% SMD0603
12/06 Value᧢ ޓGary
0.2R 5% SMD0603
For Safety LPS.
C
R391
R346
0.2R 5% SMD0603
Sheet 61 of 66 MIni-DP
R344
DP_TDB_AUX 22 DP_TDB_AUX# 22 C
R803
*12.1_1%_04 C853 G_DPC_MODE
*0.01u_16V_X7R_04 P/N = 6-21-11Y00-020 PCB Footprint = ENG_CD_2129320_A1
ML_LANE3P ML_LANE3N AUX_CHP AUX_CHN CONFIG1 CONFIG2 CGND CGND GND GND GND GND GND
B
HPD RETURN
ENG-CD-2129320-A1
0.01u_16V_X7R_04
3 C
15 DPSNK0_2_P_R 17 DPSNK0_2_N_R 10 DPSNK0_3_P_R 12 DPSNK0_3_N_R 16 18
3.3VS
DPSNK_AUX_P_R DPSNK_AUX_N_R
4 6
G_DPC_MODE TBLT_C2R_0N
2 19
mDP_HPD C866
*0.01u_16V_X7R_04 C864
1M_04
D35 BAT54CW (lision) 2 A
ML_LANE2P ML_LANE2N
R850
9 DPSNK0_1_P_R 11 DPSNK0_1_N_R
1 A
J_TBT1
3 5
DP_TDB_HPD 22 R828
*100K_04
B
R926
0_04
AC
ML_LANE1P ML_LANE1N
D01a_1016_Alex D01a_1012_Alex DPSNK0_0_P_R DPSNK0_0_N_R
R813
R798 *100K_04
D36 BAV99N3
*100K_04
A
ML_LANE0P ML_LANE0N
G_DPC_MODE 22
DP_PW R 20
C
DP_PWR
22 21 14 13 8 7 1
B.Schematic Diagrams
Q16 MTN2306AN3
D04_Reflash_0925_Alex
DP_PW R
C865 0.01u_16V_X7R_04
35,40,41,42 SYS15V 13,19,20,21,23,24,25,26,27,29,34,36,37,40,41,42,45,46 VDD3 3,5,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,25,26,27,28,29,30,32,33,34,35,36,37,41,44,46 3.3VS A
A
14,32,33,44 5VS
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title
[61] Mini-DP
Size Document Number Custom SCHEMATIC1 Date: 5
B - 62 Mini-DP
4
3
2
Rev 2.0
6-71-P15S0-DA1 Sheet
Thursday, March 06, 2014 1
61
of
66
Schematic Diagrams
2nd mSATA Board 5
4
3
M_mSATA_3.3V
2
mSATA
M_mSATA_3.3V
MJ_MSATA3
MC274
0.1u_16V_04
D04_Reflash_0926_Alex
MC1 MJ_mSATA2 1 3 5
*0.1u_16V_Y5V_04 MGND
WAKE# COEX1 COEX2
MGND 7 11 13 9 15
mSATA_TXP4_M mSATA_TXN4_M
CLKREQ# REFCLKREFCLK+ GND0 GND1
mSATA_RXN4_M mSATA_RXP4_M 21 27 29
mSATA I/F
40 mil MC9
MC10
0.1u_16V_Y5V_04 MC18
0.1u_16V_Y5V_04
1u_6.3V_X5R_04
10u_10V_Y5V_08
MGND mSATA_DET#_M MR1
GND11 PETn0 PETp0 PERn0 PERp0
17 19 37 39 41 43 45 47 49 51
MGND 0_04
Reserved0 Reserved1 GND12 3.3VAUX_3 3.3VAUX_4 GND13 Reserved2 Reserved3 Reserved4 Reserved5
MR3
0_04
MC15 MC16
0.01u_16V_X7R_04 0.01u_16V_X7R_04 0.01u_16V_X7R_04 0.01u_16V_X7R_04
6 10 16 20 1 2 4 5
M_mSATA_3.3V MH6 H7_5B5_0D3_7
MH1 H7_0D3_7
MH2 MH3 MH4 MH5 H7_0D2_3 H7_0D2_3 H7_0D2_3 H7_0D2_3 MR14 MR6 MR8
*100K_04 *100K_04 *100K_04
MR10 MR12
*100K_04 *100K_04
RX_0P RX_0N
MGND
MR4 12/06 Change شற Gary MU1 4.7K_04 SN75LVCP601 7 EN TX_0P TX_0N
HOST
DEVICE
TX_1N TX_1P
RX_1N RX_1P
8 9 DE2 MR5 *2K_1%_04 DE1
mSATA_RXN4_M mSATA_RXP4_M
0.1u_16V_Y5V_04
MGND
MGND MC13 MC14
MC12
M_mSATA_3.3V
Note: mSATA_TXP4_M mSATA_TXN4_M
Sheet 62 of 66 2nd mSATA Board
M_mSATA_3.3V
40 mil MC11
10u_10V_Y5V_08
650S52717120M431NO
MGND
B
C
24 28 48 52 42 44 46
3.3VAUX_1 1.5V_1 1.5V_2 3.3VAUX_2 LED_WWAN# LED_WLAN# LED_WPAN#
mSATA REDRIVER MGND
MGND
20 22 30 32 36 38
W_DISABLE# PERSET# SMB_CLK SMB_DATA USB_DUSB_D+
MR2
MC17
35 23 25 31 33
15 14
mSATA_TXP4_M_R mSATA_TXN4_M_R
12 11
B
ᄅᏺՠ࿓ISSUE
mSATA_RXN4_M_R mSATA_RXP4_M_R
GND GND EQ1 GND EQ2
M_mSATA_3.3V
0.01u_16V_X7R_04 0.01u_16V_X7R_04 0.01u_16V_X7R_04 0.01u_16V_X7R_04
18 26 34 40 50
GND6 GND7 GND8 GND9 GND10
*0_04
M_mSATA_3.3V
MGND
DEW2 VDD DEW1 VDD
M_mSATA_3.3V
MC4 MC5 MC6 MC7
GND2 GND3 GND4
T-PAD
mSATA_RXP4_M_R mSATA_RXN4_M_R mSATA_TXN4_M_R mSATA_TXP4_M_R
D
0.1u_16V_Y5V_04
KEY
mSATA_DET#_M
MGND
M_mSATA_3.3V MC2
4
GND5
MGND
40 mil
2 6 8 10 12 14 16
3.3VAUX_0 1.5V_0 UIM_PWR UIM_DATA UIM_CLK UIM_RESET UIM_VPP
1MR
*0_04
2MR
*0_04
3MR
*0_04
3 13 17 18 19
C
1u_6.3V_X5R_04
M_mSATA_3.3V
MR7 MR9
*4.7K_04 *4.7K_04
MR11 MR13
*4.99K_04 0_04
MGND MGND
MGND
MGND
MGND
Reserve 12/03
MGND MGND
A
MGND
MGND
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size B Date: 5
4
3
2
[62] 2ND mSATA BOARD Document Number SCHEMATIC1
Rev 1.0
6-71-P15SM-DA1
Thursday, March 06, 2014
Sheet
62
of
66
1
2nd mSATA Board B - 63
B.Schematic Diagrams
20374-020E
MC273
21
D
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1
Schematic Diagrams
Power on / S4 Resume Seq. 5
2 3
4
PWR_SW#
RSMRST# PWR_BTN#
3a 3.3V
2.44ms
3b 4 176ms
124ms
D
6
B.Schematic Diagrams
Sheet 63 of 66 Power on / S4 Resume Seq.
SUSC#
190ms
6a VDDQ
6.72ms
6b V_VCCDDQ
6.72ms
7
34us
SUSB#
7a 7b 7c
1.66ms
7d
1.176ms 1.05V_LAN_M
7e
1.2ms
7e
1.05VM
7e
1.05VS
7e
7f VTT_MEM
7f VTT_MEM 9
9 ALL_SYS_PWRGD
ALL_SYS_PWRGD
10 PM_PCH_PWROK 11 PMSYS_PWRGD_BUF
10 PM_PCH_PWROK
12 H_CPUPWRGD
12 H_CPUPWRGD
13a VCORE
13a 13b
PCH_PWROK_EC
15 PLT_RST#
15 PLT_RST#
16 dGPU_PWR_EN#
2.8ms 56ms 62.8ms
228ms+37.2ns
228ms
229.24ms+37.2ns
16 dGPU_PWR_EN# 16b 3V3_RUN
156.6ms
16a PWR_SRC DGPU_PWRGD
6.68ms
156ms
5V_RUN
MXM_RST#
C
1.08ms
148ms
16b 3V3_RUN
17
1.05VM
1.232ms 1.05VS
8.32ms
SYS_PWROK
16a
1.5VS
DELAY_PWRGD
14 14
V_VCCDDQ
3.3VS
8.26ms
14 PCH_PWROK_EC
16c
1.12ms
VCORE
14 SYS_PWROK
D
5VS
640us
11 PMSYS_PWRGD_BUF
13b DELAY_PWRGD
SUSC#
6b
7c 1.5VS 1.05V_LAN_M
PWR_BTN#
6
SUSB#
7b 3.3VS
C
B
7
5V RSMRST#
5
6a VDDQ
7a 5VS
7d
1
3 DD_ON 1.768ms
3b 5V
5
2
2 PWR_SW#
140.8ms
DD_ON
3a 3.3V
4
3
636ms
B
16c 5V_RUN
157.008ms
16a PWR_SRC 4.5ms
16a DGPU_PWRGD
102ms
17
MXM_RST#
A
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size C Date: 5
B - 64 Power on / S4 Resume Seq.
4
3
2
[63] POWER ON/S4 RESUME SEQ. Document Number SCHEMATIC1
Rev 2.0
6-71-P15S0-DA1 Sheet
Thursday, March 06, 2014 1
63
of
66
Schematic Diagrams
S3 Resume Seq. 5
4
3
2
1
D
D
7
7
SUSB#
SUSB#
7a
7b 3.3VS
7b
7c 1.5VS
7c
1.68ms
7d
1.176ms
1.05V_LAN_M
7e
1.2ms
1.05VM
7d
1.05V_LAN_M
7e
1.05VM
7e
1.05VS
7e
5VS
660us 1.4ms
3.3VS 1.5VS
1.232ms
Sheet 64 of 66 S3 Resume Seq.
1.05VS
C
C
7f VTT_MEM
7f VTT_MEM 9
ALL_SYS_PWRGD
9 ALL_SYS_PWRGD
280us 1.144ms 8.56ms
10 PM_PCH_PWROK 11 PMSYS_PWRGD_BUF
10 PM_PCH_PWROK 11 PMSYS_PWRGD_BUF
12 H_CPUPWRGD
12 H_CPUPWRGD
13a VCORE
13a
VCORE
62.4ms
8.12ms
8.176ms
13b DELAY_PWRGD
13b
14 SYS_PWROK
14
SYS_PWROK
14 PCH_PWROK_EC
14
PCH_PWROK_EC
15 PLT_RST#
15 PLT_RST#
16 dGPU_PWR_EN#
DELAY_PWRGD 106ms_38.4ns
106ms
107.7ms_38.4ns
16 dGPU_PWR_EN#
3.4ms
16b 3V3_RUN
3.06ms
16c
3.4ms
16c
4.06ms
16a PWR_SRC
16b 3V3_RUN
B
B
5V_RUN
16a PWR_SRC 16a
DGPU_PWRGD
17
MXM_RST#
4.8ms
5V_RUN
16a DGPU_PWRGD
104ms
17
MXM_RST#
A
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size C Date: 5
4
3
2
[64] S3 RESUME SEQ. Document Number SCHEMATIC1
Rev 2.0
6-71-P15S0-DA1 Sheet
Thursday, March 06, 2014
64
of
66
1
S3 Resume Seq. B - 65
B.Schematic Diagrams
7a 5VS
Schematic Diagrams
Into S3 Sequence 5
2
PWR_SW#
3
DD_ON
4
3
2
1
2 PWR_SW# 3 DD_ON
3a 3.3V
3a 3.3V
3b 5V 4 5
3b
RSMRST# D
6
4
PWR_BTN#
5
PWR_BTN#
SUSC#
6
SUSC#
6a VDDQ
B.Schematic Diagrams
D
6a VDDQ
6b V_VCCDDQ
7
5V RSMRST#
6b
V_VCCDDQ
SUSB#
7
SUSB#
7a 5VS
7a
7b 3.3VS
7b
340ms
5VS
4.56ms
3.3VS 53.2ms
7c 1.5VS
7c
7d
1.05V_LAN_M
7d
7e
1.05VM
7e
7e
1.05VS
7e
1.5VS 14.6ms
Sheet 65 of 66 Into S3 Sequence
1.05V_LAN_M
12.6ms
1.05VM 16.2ms
1.05VS
C
C
1.88ms
7f VTT_MEM
7f VTT_MEM 9
9 ALL_SYS_PWRGD
ALL_SYS_PWRGD
60us
10 PM_PCH_PWROK
10 PM_PCH_PWROK 11 PMSYS_PWRGD_BUF
11 PMSYS_PWRGD_BUF
12 H_CPUPWRGD
12 H_CPUPWRGD
13a VCORE
13a VCORE
13b DELAY_PWRGD
13b DELAY_PWRGD 14 SYS_PWROK
14 PCH_PWROK_EC
14 PCH_PWROK_EC
15 PLT_RST#
15
16c
5V_RUN
59.33ms
60.14us
25.64ms
125.5us
PLT_RST#
3.287ms 2.04s
16 dGPU_PWR_EN# 3V3_RUN
86.21us
959us
14 SYS_PWROK
16b
60us
16 dGPU_PWR_EN#
1.28ms
16b
3V3_RUN 480ms
B
16c
5V_RUN
16a PWR_SRC
B
16a
PWR_SRC
1.82s
16a
DGPU_PWRGD
17
MXM_RST#
2.00s
4.64ms
16a
1.9s
5.28ms
17
DGPU_PWRGD MXM_RST#
A
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size C Date: 5
B - 66 Into S3 Sequence
4
3
2
[65] Into S3 SEQ. Document Number SCHEMATIC1
Rev 2.0
6-71-P15S0-DA1
Thursday, March 06, 2014
Sheet 1
65
of
66
Schematic Diagrams
Into S4 Sequence 5
2
PWR_SW#
3
DD_ON
4
3
2
1
2 PWR_SW# 3 DD_ON 3.3V
3a
3a 3.3V 44.8Mms 14.4ms
3b 5V 4
RSMRST#
5
PWR_BTN#
6
SUSC#
D
376ms
6a VDDQ 6b V_VCCDDQ
7
5V
4
RSMRST#
5
PWR_BTN#
6
SUSC#
1.12ms
6a
VDDQ
1.12ms
6b
96us
SUSB#
3b
V_VCCDDQ
7
SUSB#
7a 7a 5VS
5VS
324ms
7b
332ms
3.3VS
7c 7c 1.5VS
17.8ms
7d
1.05V_LAN_M
7e
1.05VM
7e
1.05VS
1.5VS
248ms
7d
1.05V_LAN_M
7e
1.05VM
7e
1.05VS
14ms
338ms
C
7f 9
9 ALL_SYS_PWRGD
60us
10 PM_PCH_PWROK
60us
10 PM_PCH_PWROK
11 PMSYS_PWRGD_BUF
95us
11 PMSYS_PWRGD_BUF
12
86.4us
H_CPUPWRGD
12 H_CPUPWRGD
52.97ms
13a 13b
VCORE 1.144ms
DELAY_PWRGD 60.14us
14 SYS_PWROK
20.64ms
14 PCH_PWROK_EC
C
7f VTT_MEM
1.28ms
VTT_MEM ALL_SYS_PWRGD
Sheet 66 of 66 Into S4 Sequence
121.5us
13a
VCORE
13b
DELAY_PWRGD
14
SYS_PWROK
14
PCH_PWROK_EC
15 PLT_RST#
15 PLT_RST# 6.09ms
16
dGPU_PWR_EN#
5.7s
16
dGPU_PWR_EN#
16b
3V3_RUN
16c
5V_RUN
412ms
16b 3V3_RUN 1.08s B
16c
5V_RUN
B
16a
16a PWR_SRC
19.8ms
PWR_SRC
1.94s
16a
5.66s
DGPU_PWRGD
16a DGPU_PWRGD 20.6ms
17
17
5.5s
MXM_RST#
MXM_RST#
A
A
ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size C Date: 5
4
3
2
[66] Into S4 SEQ. Document Number SCHEMATIC1
Rev 2.0
6-71-P15S0-DA1
Thursday, March 06, 2014
Sheet
66
of
66
1
Into S4 Sequence B - 67
B.Schematic Diagrams
7b 3.3VS
D
B.Schematic Diagrams
Schematic Diagrams
B - 68
BIOS Update
Appendix C:Updating the FLASH ROM BIOS To update the FLASH ROM BIOS, you must: • • • • • • •
Download the BIOS 1. Go to www.clevo.com.tw and point to E-Services and click E-Channel. 2. Use your user ID and password to access the appropriate download area (BIOS), and download the latest BIOS files (the BIOS file will be contained in a batch file that may be run directly once unzipped) for your computer model (see sidebar for important information on BIOS versions).
Unzip the downloaded files to a bootable CD/DVD/ or USB Flash drive 1. Insert a bootable CD/DVD/USB flash drive into the CD/DVD drive/USB port of the computer containing the downloaded files. 2. Use a tool such as Winzip or Winrar to unzip all the BIOS files and refresh tools to your bootable CD/DVD/USB flash drive (you may need to create a bootable CD/DVD with the files using a 3rd party software).
BIOS Version Make sure you download the latest correct version of the BIOS appropriate for the computer model you are working on. You should only download BIOS versions that are V1.01.XX or higher as appropriate for your computer model. Note that BIOS versions are not backward compatible and therefore you may not downgrade your BIOS to an older version after upgrading to a later version (e.g if you upgrade a BIOS to ver 1.01.05, you MAY NOT then go back and flash the BIOS to ver 1.01.04).
Set the computer to boot from the external drive 1. With the bootable CD/DVD/USB flash drive containing the BIOS files in your CD/DVD drive/USB port, restart the computer and press F2 (in most cases) to enter the BIOS. 2. Use the arrow keys to highlight the Boot menu. 3. Use the “+” and “-” keys to move boot devices up and down the priority order. 4. Make sure that the CD/DVD drive/USB flash drive is set first in the boot priority of the BIOS. 5. Press F4 to save any changes you have made and exit the BIOS to restart the computer. C - 1
C:BIOS Update
Download the BIOS update from the web site. Unzip the files onto a bootable CD/DVD/USB Flash Drive. Reboot your computer from an external CD/DVD/USB Flash Drive. Use the flash tools to update the flash BIOS using the commands indicated below. Restart the computer booting from the HDD and press F2 at startup enter the BIOS. Load setup defaults from the BIOS and save the default settings and exit the BIOS to restart the computer. After rebooting the computer you may restart the computer again and make any required changes to the default BIOS settings.
BIOS Update
Use the flash tools to update the BIOS 1. Make sure you are not loading any memory management programs such as HIMEM by holding the F8 key as you see the message “Starting MS-DOS”. You will then be prompted to give “Y” or “N” responses to the programs being loaded by DOS. Choose “N” for any memory management programs. 2. You should now be at the DOS prompt e.g: DISK C:\> (C is the designated drive letter for the CD/DVD drive/USB flash drive). 3. Type the following command at the DOS prompt:
C:BIOS Update
C:\> Flash.bat 4. The utility will then proceed to flash the BIOS. 5. You should then be prompted to press any key to restart the system or turn the power off, and then on again but make sure you remove the CD/DVD/USB flash drive from the CD/DVD drive/USB port before the computer restarts.
Restart the computer (booting from the HDD) 1. With the CD/DVD/USB flash drive removed from the CD/DVD drive/USB port the computer should restart from the HDD. 2. Press F2 as the computer restarts to enter the BIOS. 3. Use the arrow keys to highlight the Exit menu. 4. Select Load Setup Defaults (or press F3) and select “Yes” to confirm the selection. 5. Press F4 to save any changes you have made and exit the BIOS to restart the computer.
Your computer is now running normally with the updated BIOS You may now enter the BIOS and make any changes you require to the default settings.
C-2
View more...
Comments
